ports/print/ghostscript8/scripts/configure.batch, branch release/4.3.0 FreeBSD ports tree This commit was manufactured by cvs2svn to create tag 'RELEASE_4_3_0'. 2001-04-18T21:37:32+00:00 cvs2svn cvs2svn@FreeBSD.org 2001-04-18T21:37:32+00:00 01a9f79f0a3692d8148990805beabc8593d3596d 






- "Gelhaus driver" (cdj850) wasn't active in gs, fix that
2001-04-01T15:55:32+00:00

Andreas Klemm
andreas@FreeBSD.org

2001-04-01T15:55:32+00:00

63432c12c7b794aa7665afe9f258f4b2fd8e570b

- therefore bump port revision
- add a makefile template, so that it will be compiled in
- patch configure.batch and the interactive one
  interactive configuration is still not enabled, because every
  driver entry needs to be checked thoroughly if its still present,
  if more printer models are supported, if there are new printers/drivers,
  etc ... This needs time that I currently don't have.
  Any taker ???





- therefore bump port revision
- add a makefile template, so that it will be compiled in
- patch configure.batch and the interactive one
  interactive configuration is still not enabled, because every
  driver entry needs to be checked thoroughly if its still present,
  if more printer models are supported, if there are new printers/drivers,
  etc ... This needs time that I currently don't have.
  Any taker ???







Honour the NO_X variable, and don't try and build the X11 output formats,
2001-02-25T19:02:46+00:00

Nik Clayton
nik@FreeBSD.org

2001-02-25T19:02:46+00:00

03030cf1abfc5a5e9bad965caa7911b537365125

or depend on the X11 libraries, if it is set.

This should allow "make release" to work happily with the documentation
build again.

Approved by:	andreas (MAINTAINER)





or depend on the X11 libraries, if it is set.

This should allow "make release" to work happily with the documentation
build again.

Approved by:	andreas (MAINTAINER)







- added stable version 4.0.4 of gimp-print (stp) driver
2001-01-17T20:19:03+00:00

Andreas Klemm
andreas@FreeBSD.org

2001-01-17T20:19:03+00:00

8098ba2c79b227f4edb8c41b034a1a97eb5f5d9a

  high quality drivers for Epsons, HPs, ...
- bumped port revision
- modified all target and added a makefile component to build
  tool from stp driver (escputil) to do maintenance on epsons
  install manpage as well
- variable name changes, new scheme sounds better
- use variables as often as possible in all make targets
  to reduce port maintenance as much as possible
- fix two copy and paste mistakes in echo messages
- updated pkg_plist, tested port and package building
  as well as removal
- modified configure.batch to build stp driver





  high quality drivers for Epsons, HPs, ...
- bumped port revision
- modified all target and added a makefile component to build
  tool from stp driver (escputil) to do maintenance on epsons
  install manpage as well
- variable name changes, new scheme sounds better
- use variables as often as possible in all make targets
  to reduce port maintenance as much as possible
- fix two copy and paste mistakes in echo messages
- updated pkg_plist, tested port and package building
  as well as removal
- modified configure.batch to build stp driver







cosmetic: add cvs id
2001-01-17T09:31:14+00:00

Andreas Klemm
andreas@FreeBSD.org

2001-01-17T09:31:14+00:00

b58ebc73b1b6080c0f88bb6c7d4478dba2b8a699












update to ghostscript v 6.50
2001-01-16T22:57:24+00:00

Andreas Klemm
andreas@FreeBSD.org

2001-01-16T22:57:24+00:00

7aa654686b5fc9824c3d8987eff00a699b1903e0

- removed port revision, because of new version
- added PCL3 driver (hpdj successor) from Martin Lottermoser
  *both* driver, HPDJ and PCL3, are now compiled in
  reason: PCL3 is still flagged as BETA and author didn't get much response
  Although Martin says, its definitively not ALPHA, its safer to have the
  old drivers around, if things fail for some reason.
  Martin confirmed, that its possible to have both in one gs binary !!!
- disable configure script temporarily, since dialog needs a driver update
  but I don't want to hold back that port any longer.
- enabled as many gs driver as possible
- reorganized MASTER_SITES
  - added mirrors
  - add a note, that russion mirror isn't up to date, so don't add it
  - optimized downloading from 6 different sources by special ordering
- reorganized Makefile completely
  - put only ${GS_SOURCES} into EXTRACT_ONLY variable
    unpacking other 3rd party src's is handled in post-extract target
  - directory creating, patching, unpacking and install actions are
    now handeled within the proper make target. This makes port maintenance
    much easier, i.e.: if you enter make extract, then only extraction
    of things happen, but makefiles are still not patched. Before this
    cleanup, things were not so structured and not easy to maintain.
    Maybe we get a configure script later, to choose between different
    3rd party driver options, then this "sorting" and documenting
    will support the migration process...
  - silence port by hiding actions with "@"
  - insert many informational echoes. This makes port maintenance and
    troubleshooting easier
  - put more unique comments in front of the different 3rd party modules
  - document things better
  - use as many environment variables as necessary, so that "numerical"
    changes only have to happen on some places and not withing make targets
  - use gs version number also in docu directory
  - properly install runtime, info and doc files from 3rd party drivers
  - put not needed stuff into "NOPORTDOCS" section
- keep old font names to avoid fetching unnecessary things
- updated patches as necessary
- added new patch from Nartin Lottermoser
- removed 2 patches that have been incorporated into gs 6.50
- added needed manual pages
- updated pkg-plist
- finally tested port and package building as well as port removal
  new port passes all disciplines ;-)





- removed port revision, because of new version
- added PCL3 driver (hpdj successor) from Martin Lottermoser
  *both* driver, HPDJ and PCL3, are now compiled in
  reason: PCL3 is still flagged as BETA and author didn't get much response
  Although Martin says, its definitively not ALPHA, its safer to have the
  old drivers around, if things fail for some reason.
  Martin confirmed, that its possible to have both in one gs binary !!!
- disable configure script temporarily, since dialog needs a driver update
  but I don't want to hold back that port any longer.
- enabled as many gs driver as possible
- reorganized MASTER_SITES
  - added mirrors
  - add a note, that russion mirror isn't up to date, so don't add it
  - optimized downloading from 6 different sources by special ordering
- reorganized Makefile completely
  - put only ${GS_SOURCES} into EXTRACT_ONLY variable
    unpacking other 3rd party src's is handled in post-extract target
  - directory creating, patching, unpacking and install actions are
    now handeled within the proper make target. This makes port maintenance
    much easier, i.e.: if you enter make extract, then only extraction
    of things happen, but makefiles are still not patched. Before this
    cleanup, things were not so structured and not easy to maintain.
    Maybe we get a configure script later, to choose between different
    3rd party driver options, then this "sorting" and documenting
    will support the migration process...
  - silence port by hiding actions with "@"
  - insert many informational echoes. This makes port maintenance and
    troubleshooting easier
  - put more unique comments in front of the different 3rd party modules
  - document things better
  - use as many environment variables as necessary, so that "numerical"
    changes only have to happen on some places and not withing make targets
  - use gs version number also in docu directory
  - properly install runtime, info and doc files from 3rd party drivers
  - put not needed stuff into "NOPORTDOCS" section
- keep old font names to avoid fetching unnecessary things
- updated patches as necessary
- added new patch from Nartin Lottermoser
- removed 2 patches that have been incorporated into gs 6.50
- added needed manual pages
- updated pkg-plist
- finally tested port and package building as well as port removal
  new port passes all disciplines ;-)







- Add 3rd party gs driver for HP DeskJet 970
2000-11-26T14:13:02+00:00

Andreas Klemm
andreas@FreeBSD.org

2000-11-26T14:13:02+00:00

9fae0f2e47c1435f4f6b104a2f0ea4d3f2a8e066

- http://www.harsch.net/Ghostscript/ghostscript.html
- driver is based on Uli Wortmann's HO DJ850 driver
- supports duplex printing
  Note from the author: in duplex mode black is not so intensive as
  in normal mode. Maybe HP wants to prevent, that you don't see the
  black of the other side of the page too much.
  If somebody knows HP's algorithm, how to reduce the black, then
  author would try to compensate it with some code...





- http://www.harsch.net/Ghostscript/ghostscript.html
- driver is based on Uli Wortmann's HO DJ850 driver
- supports duplex printing
  Note from the author: in duplex mode black is not so intensive as
  in normal mode. Maybe HP wants to prevent, that you don't see the
  black of the other side of the page too much.
  If somebody knows HP's algorithm, how to reduce the black, then
  author would try to compensate it with some code...







Add HPDJ driver
2000-04-20T17:31:44+00:00

Andreas Klemm
andreas@FreeBSD.org

2000-04-20T17:31:44+00:00

bf21315f1e2618eb248a8ac0db3c39ce4adda81b

an enhanced PCL3 (PCL3+) driver
that was part of gs5 port and got lost in gs55 port.
Now it reappears in gs 6.01 ;-)

ftp://ftp.sbs.de/pub/graphics/ghostscript/pcl3/pcl3.html





an enhanced PCL3 (PCL3+) driver
that was part of gs5 port and got lost in gs55 port.
Now it reappears in gs 6.01 ;-)

ftp://ftp.sbs.de/pub/graphics/ghostscript/pcl3/pcl3.html







- fix typo in variable name (Louis), changed it to HP8XX_DRV afterwards
2000-03-25T21:02:50+00:00

Andreas Klemm
andreas@FreeBSD.org

2000-03-25T21:02:50+00:00

00114700d01225f61a482bc37bde43f2587f9c24

- make configure script work (Louis)
- make configure.batch script work (Andreas)
- extract contributed HP8XX driver in ${WRKSRC}/src
- make png driver compile (add $(PREFIX)/include to XINCLUDE variable)

Dunno, if this will be the last round of cleanups...

Submitted by:	"Louis A. Mamakos" <louie@TransSys.COM>





- make configure script work (Louis)
- make configure.batch script work (Andreas)
- extract contributed HP8XX driver in ${WRKSRC}/src
- make png driver compile (add $(PREFIX)/include to XINCLUDE variable)

Dunno, if this will be the last round of cleanups...

Submitted by:	"Louis A. Mamakos" <louie@TransSys.COM>







new ghostscript 6.01 port after repository copy
2000-03-25T12:27:38+00:00

Andreas Klemm
andreas@FreeBSD.org

2000-03-25T12:27:38+00:00

d54318fb63a277a017c016f58711176ce7d1aba4

additional changes by me:
- configure + configure.batch updates:
  reviewed all informations in makefiles and driver docu
  to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
  Driver is still in developement. There is a newer 1.4 beta version
  available, but this version is recommended by the author.
      http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
  Supported are the following models:
      HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
- configure + configure.batch updates:
  reviewed all informations in makefiles and driver docu
  to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
  Driver is still in developement. There is a newer 1.4 beta version
  available, but this version is recommended by the author.
      http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
  Supported are the following models:
      HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
    printer: Epson Stylus Color 740
    mode1: stc740ih.upp: Epson Stylus Color 740, 1440x720DpI, Inkjet Paper
    mode2: stc740p.upp : Epson Stylus Color 740, 720x720DpI, Plain Paper
    mode3: stc740pl.upp: Epson Stylus Color 740, 360x360DpI, Plain Paper
    contributor: Francois D. Menard <fmenard@g6-114b.residence.usherb.ca>
    #
    printer: Epson LQ-1170
    mode1: lqx70ch.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x360DpI, Plain Pap.
    mode2: lqx70cl.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 180x180DpI, Plain Pap.
    mode3: lqx70cm.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x180DpI, Plain Pap.
    contributor: Harold Bower <HalBower@worldnet.att.net>
- updated PLIST
- use GS_VERSION for DISTNAME
- fix installation path for pdf_sec.ps if defined PDFENCRYPT
- silence make install ("@")
- change COMMENT to reflect version
- update DESCR, to document driver enhancements compared to stanfard gs
  release
- apsfilter will be updated later

Submitted by:   "Alec Wolman" <wolman@cs.washington.edu>





additional changes by me:
- configure + configure.batch updates:
  reviewed all informations in makefiles and driver docu
  to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
  Driver is still in developement. There is a newer 1.4 beta version
  available, but this version is recommended by the author.
      http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
  Supported are the following models:
      HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
- configure + configure.batch updates:
  reviewed all informations in makefiles and driver docu
  to make list of available drivers and supported printers complete
- added DeskJet 880C/882C/895C Driver from Matthew J. Gelhau
  Driver is still in developement. There is a newer 1.4 beta version
  available, but this version is recommended by the author.
      http://www.proaxis.com/~mgelhaus/linux/software/hp880c/hp880c.html
  Supported are the following models:
      HP DeskJet 812C 815C 832C 880C 882C 895C 932C 970C
- added contributed uniprint driver profiles:
    printer: Epson Stylus Color 740
    mode1: stc740ih.upp: Epson Stylus Color 740, 1440x720DpI, Inkjet Paper
    mode2: stc740p.upp : Epson Stylus Color 740, 720x720DpI, Plain Paper
    mode3: stc740pl.upp: Epson Stylus Color 740, 360x360DpI, Plain Paper
    contributor: Francois D. Menard <fmenard@g6-114b.residence.usherb.ca>
    #
    printer: Epson LQ-1170
    mode1: lqx70ch.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x360DpI, Plain Pap.
    mode2: lqx70cl.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 180x180DpI, Plain Pap.
    mode3: lqx70cm.upp : Epson LQ-1170 ESC/P2 Dot Matrix, 360x180DpI, Plain Pap.
    contributor: Harold Bower <HalBower@worldnet.att.net>
- updated PLIST
- use GS_VERSION for DISTNAME
- fix installation path for pdf_sec.ps if defined PDFENCRYPT
- silence make install ("@")
- change COMMENT to reflect version
- update DESCR, to document driver enhancements compared to stanfard gs
  release
- apsfilter will be updated later

Submitted by:   "Alec Wolman" <wolman@cs.washington.edu>