src/sys/conf/WITHOUT_SOURCELESS_UCODE, branch main FreeBSD source tree sys: Remove $FreeBSD$: one-line sh pattern 2023-08-16T17:54:58+00:00 Warner Losh imp@FreeBSD.org 2023-08-16T17:54:58+00:00 031beb4e239bfce798af17f5fe8dba8bcaf13d99 Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/ 
Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/
retire cp(4) driver 2022-12-13T20:24:52+00:00 Ed Maste emaste@FreeBSD.org 2020-09-24T14:08:02+00:00 895992bb66d214f34c76a2b9da1133d457b2dee1 Sync serial (e.g. T1/T1/G.703) interfaces are obsolete, this driver includes obfuscated source, and has reported potential security issues. Differential Revision: https://reviews.freebsd.org/D33468 
Sync serial (e.g. T1/T1/G.703) interfaces are obsolete, this driver
includes obfuscated source, and has reported potential security issues.

Differential Revision:  https://reviews.freebsd.org/D33468
retire ce(4) driver 2022-12-13T20:24:25+00:00 Ed Maste emaste@FreeBSD.org 2020-02-02T18:27:37+00:00 76f6751844920f768b944ecadec94aaa77ccb40e Sync serial (e.g. T1/T1/G.703) interfaces are obsolete, this driver includes obfuscated source, and has reported potential security issues. Differential Revision: https://reviews.freebsd.org/D33467 
Sync serial (e.g. T1/T1/G.703) interfaces are obsolete, this driver
includes obfuscated source, and has reported potential security issues.

Differential Revision:	https://reviews.freebsd.org/D33467
retire cx,ctau drivers 2020-03-20T16:50:19+00:00 Ed Maste emaste@FreeBSD.org 2020-03-20T16:50:19+00:00 2733d8c96c6fa72beac42174db9f810de5769781 The devices supported by these drivers are obsolete ISA cards, and the sync serial protocols they supported are essentially obsolete too. Sponsored by: The FreeBSD Foundation 
The devices supported by these drivers are obsolete ISA cards, and the
sync serial protocols they supported are essentially obsolete too.

Sponsored by:	The FreeBSD Foundation
Remove adv(4) and adw(4) 2018-10-22T02:34:47+00:00 Warner Losh imp@FreeBSD.org 2018-10-22T02:34:47+00:00 43b16da804f6c97209dd19333bfde0ede9786059 Remove the advanssy drivers (both adv and adw). They were tagged as gone in 12 a while qgo. The nycbug dmesg database shows this was last seen in 6 and there were only a few adv sightings then (none for adw). Relnotes: yes 
Remove the advanssy drivers (both adv and adw). They were tagged as
gone in 12 a while qgo. The nycbug dmesg database shows this was last
seen in 6 and there were only a few adv sightings then (none for adw).

Relnotes: yes
Remove stray fatm reference. 2018-10-21T16:29:32+00:00 Warner Losh imp@FreeBSD.org 2018-10-21T16:29:32+00:00 42e23e9913ee8c5e7afacb742c9a382effc6e1ef 






rtwn(4), urtwn(4): merge common code, add support for 11ac devices.
2016-10-17T20:38:24+00:00

Andriy Voskoboinyk
avos@FreeBSD.org

2016-10-17T20:38:24+00:00

7453645f2a9411a3f9d982b768bcc323f41cf906

All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
 * for RTL8821AU: 2 VAPs at the same time;
 * other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
 * bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
 * common (if_rtwn*)
 * chip-specific (rtl*/*)
- various other bugfixes.

Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn  rtwnfw  -> rtwn rtwn_pci rtwnfw

Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.

Tested by:	kevlo, garga,
		Peter Garshtja <peter.garshtja@ambient-md.com>,
		Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
		Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
		<otacilio.neto@bsd.com.br>
Relnotes:	yes





All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
 * for RTL8821AU: 2 VAPs at the same time;
 * other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
 * bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
 * common (if_rtwn*)
 * chip-specific (rtl*/*)
- various other bugfixes.

Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn  rtwnfw  -> rtwn rtwn_pci rtwnfw

Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.

Tested by:	kevlo, garga,
		Peter Garshtja <peter.garshtja@ambient-md.com>,
		Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
		Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
		<otacilio.neto@bsd.com.br>
Relnotes:	yes







Add nodevice iwmfw to WITHOUT_SOURCELESS_UCODE.
2015-08-08T20:45:47+00:00

Rui Paulo
rpaulo@FreeBSD.org

2015-08-08T20:45:47+00:00

cbe49cc4156c5e8f1372c7d484ea74011b2264f3












The sn driver doesn't actually include microcode at the current time,
2014-12-30T02:39:44+00:00

Warner Losh
imp@FreeBSD.org

2014-12-30T02:39:44+00:00

e9d2602ae60100b5d4a683c65c62fecc76b15112

although it may in the future. Or not since the ositech cards that
might need it have become perhaps too rare to support.





although it may in the future. Or not since the ositech cards that
might need it have become perhaps too rare to support.







Import OpenBSD's rsu(4) WLAN driver.
2013-07-30T02:07:57+00:00

Rui Paulo
rpaulo@FreeBSD.org

2013-07-30T02:07:57+00:00

31d9867769df3c14e87a6de68a20ba516ecba9f6

Support chipsets are the Realtek RTL8188SU, RTL8191SU, and RTL8192SU.

Many thanks to Idwer Vollering for porting/writing the man page and for
testing.

Reviewed by:	adrian, hselasky
Obtained from:	OpenBSD
Tested by:	kevlo, Idwer Vollering <vidwer at gmail.com>





Support chipsets are the Realtek RTL8188SU, RTL8191SU, and RTL8192SU.

Many thanks to Idwer Vollering for porting/writing the man page and for
testing.

Reviewed by:	adrian, hselasky
Obtained from:	OpenBSD
Tested by:	kevlo, Idwer Vollering <vidwer at gmail.com>