'RELENG_6_0_0_RELEASE'.

This commit was manufactured to restore the state of the 6.0-RELEASE image.

o First attempt on removing Giant from polling. Details:
  http://lists.freebsd.org/pipermail/cvs-src/2005-September/051848.html
o Second attempt, and big polling cleanup including:
  - Functinal approach to turning polling on/off
  - Deprecating of poll_in_trap
  - Removal of ifnet knowledge from kern_poll.c
  Details:
  http://lists.freebsd.org/pipermail/cvs-src/2005-October/053267.html
o Improved checking of user configurable sysctls. Details:
  http://lists.freebsd.org/pipermail/cvs-src/2005-October/053351.html
o Moving DEVICE_POLLING from opt_global.h to opt_device_polling.h:
  http://lists.freebsd.org/pipermail/cvs-src/2005-October/053479.html

o All related documentation fixes.

Approved by:	re (kensmith)
Thanks to:	everyone, who helped with testing

if_pflog.c:1.14 if_pfsync.c:1.21 if_an.c:1.70 if_ar.c:1.72 if_arl.c:1.11
amrr.c:1.10 onoe.c:1.10 if_ath.c:1.101 awi.c:1.41 if_bfe.c:1.27
if_bge.c:1.93 if_cm_isa.c:1.7 smc90cx6.c:1.16 if_cnw.c:1.20 if_cp.c:1.25
if_cs.c:1.42 if_ct.c:1.26 if_cx.c:1.46 if_ed.c:1.256 if_em.c:1.68
if_en_pci.c:1.37 midway.c:1.66 if_ep.c:1.143 if_ex.c:1.58 if_fatm.c:1.20
if_fe.c:1.93 if_fwe.c:1.38 if_fwip.c:1.8 if_fxp.c:1.244 if_gem.c:1.33
if_hatm.c:1.25 if_hatm_intr.c:1.20 if_hatm_ioctl.c:1.13 if_hatm_rx.c:1.10
if_hatm_tx.c:1.14 if_hme.c:1.39 if_ie.c:1.104 if_ndis.c:1.101
if_ic.c:1.24 if_ipw.c:1.10 if_iwi.c:1.10 if_ixgb.c:1.13 if_lge.c:1.41
if_lnc.c:1.113 if_my.c:1.31 if_nge.c:1.77 if_nve.c:1.10 if_owi.c:1.12
if_patm.c:1.9 if_patm_intr.c:1.6 if_patm_ioctl.c:1.10 if_patm_tx.c:1.10
pdq_ifsubr.c:1.28 if_plip.c:1.38 if_ral.c:1.12 if_ral_pci.c:1.2
if_ray.c:1.81 if_rayvar.h:1.22 if_re.c:1.49 if_sbni.c:1.21 if_sbsh.c:1.14
if_sn.c:1.48 dp83932.c:1.21 if_snc_pccard.c:1.9 if_sr.c:1.70 if_tx.c:1.91
if_txp.c:1.33 if_aue.c:1.92 if_axe.c:1.32 if_cdce.c:1.8 if_cue.c:1.59
if_kue.c:1.66 if_rue.c:1.23 if_udav.c:1.16 if_ural.c:1.12 if_vge.c:1.16
if_vx.c:1.58 if_wi.c:1.185 if_wi_pci.c:1.26 if_wl.c:1.68 if_xe.c:1.60
if_xe_pccard.c:1.30 if_el.c:1.68 i4b_ipr.c:1.35 i4b_isppp.c:1.31
kern_poll.c:1.20 bridge.c:1.94 bridgestp.c:1.4 if_arcsubr.c:1.27
if_atm.h:1.24 if_atmsubr.c:1.40 if_bridge.c:1.16 if_ef.c:1.35
if_ethersubr.c:1.196 if_faith.c:1.37 if_fddisubr.c:1.100 if_fwsubr.c:1.14
if_gif.c:1.54 if_gre.c:1.34 if_iso88025subr.c:1.70 if_loop.c:1.107
if_ppp.c:1.106 if_spppsubr.c:1.121 if_tap.c:1.57 if_tun.c:1.154
if_vlan.c:1.80 ppp_tty.c:1.67 ieee80211_ioctl.c:1.32 atm_if.c:1.31
ng_eiface.c:1.33 ng_ether.c:1.50 ng_fec.c:1.19 ng_iface.c:1.44
ng_sppp.c:1.9 ip_carp.c:1.30 ip_fastfwd.c:1.30 in6.c:1.53 nd6_nbr.c:1.31
natm.c:1.40 if_dc.c:1.162 if_de.c:1.168 if_pcn.c:1.72 if_rl.c:1.154
if_sf.c:1.84 if_sis.c:1.135 if_sk.c:1.108 if_ste.c:1.86 if_ti.c:1.109
if_tl.c:1.101 if_vr.c:1.106 if_wb.c:1.81 if_xl.c:1.194 from HEAD to
RELENG_6:

  Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
  IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
  ifnet.if_drv_flags.  Device drivers are now responsible for
  synchronizing access to these flags, as they are in if_drv_flags.  This
  helps prevent races between the network stack and device driver in
  maintaining the interface flags field.

  Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
  some less so.

  Reviewed by:    pjd, bz

Approved by:	re (scottl)

if_em.c:1.67 if_ex.c:1.57 if_fe.c:1.92 if_fxp.c:1.242 if_gem.c:1.32
if_hme.c:1.38 if_ie.c:1.103 if_ndis.c:1.100 if_ixgb.c:1.12 if_lge.c:1.40
if_lnc.c:1.112 if_my.c:1.30 if_nge.c:1.76 if_nve.c:1.9 if_owi.c:1.11
pdq_ifsubr.c:1.27 if_ray.c:1.80 if_re.c:1.47 if_sn.c:1.47 dp83932.c:1.20
if_tx.c:1.90 if_txp.c:1.32 if_aue.c:1.91 if_axe.c:1.31 if_cue.c:1.58
if_kue.c:1.65 if_rue.c:1.22 if_udav.c:1.15 if_vge.c:1.15 if_wi.c:1.182
if_wl.c:1.67 if_xe.c:1.58 if_dc.c:1.161 if_de.c:1.167 if_pcn.c:1.70
if_rl.c:1.153 if_sf.c:1.83 if_sis.c:1.134 if_sk.c:1.107 if_ste.c:1.85
if_ti.c:1.108 if_tl.c:1.100 if_vr.c:1.105 if_wb.c:1.80 if_xl.c:1.193
from HEAD to RELENG_6:

  Modify device drivers supporting multicast addresses to lock if_addr_mtx
  over iteration of their multicast address lists when synchronizing the
  hardware address filter with the network stack-maintained list.

  Problem reported by:    Ed Maste (emaste at phaedrus dot sandvine dot ca>

Approved by:	re (scottl)

- add missing ether_poll_deregister
- add per-device polling
- move the setting of if_capenable further down so that the
  VLAN caps are honored as well

Approved by:	re (kensmith), ru

struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam

MFC after: 1 week

Submitted by: Paul Willmann willmann at rice dot edu
MFC After: 3 weeks

Spotted by:	ru

some of which are rather serious:
- Use the device sysctl tree instead of rolling our own.
- Don't create a bus_dmamap_t to pass to bus_dmamem_alloc(), it is
  bus_dmamem_alloc() that creates it itself.  The DMA map created
  by the driver was overwritten and its memory was leaked.
- Fix resource handling bugs in the error path of ixgb_dma_alloc().
- Don't use vtophys() to get the base address of the TX and RX rings
  when busdma already gave us the correct address to use!
- Remove now useless includes and the alpha_XXX_dmamap() hack.
- Don't initialize if_output to ether_output(), ether_ifattach() does
  it for us already.
- Add proper module dependencies on ether and pci.

Unfortunately, I'm not lucky enough to own an ixgb(4) card, nor a
machine with a bus where to plug it in and I couldn't find anyone able
to test these patches, so they are only build-tested and I won't MFC
them for 5.4-RELEASE.