src/sys/dev/mxge/rss_eth_z8e.h, branch main

sys: Remove $FreeBSD$: one-line bare tag

2023-08-16T17:55:17+00:00

Remove /^\s*\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

2023-05-12T16:44:03+00:00

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with:		pfg
MFC After:		3 days
Sponsored by:		Netflix

sys/dev: further adoption of SPDX licensing ID tags.

2017-11-27T14:52:40+00:00

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Update mxge(4) firmware to the latest version available from

2012-05-29T00:53:51+00:00

Myricom (1.4.55).

MFC after:	3 days
Sponored by: Myricom, Inc.

Update mxge(4) firmware to the latest version available from

2011-07-12T15:07:17+00:00

Myricom (1.4.53a).

MFC after:	7 days
Sponored by: Myricom, Inc.

Update mxge firmware to latest available from Myricom.

2010-05-19T19:44:00+00:00

Update mxge(4) firmware to 1.4.48b (latest available) from Myricom.

2010-01-11T22:25:09+00:00

Pertinant highlights from Myricom CHANGES file include:

- Make sure invalid external smbus activity cannot affect performance
- Fix to avoid a bug where the link could sometimes stay reported as
   up on after unplugging the cable.
- For 8B NIC, make smbus connection passive at init to avoid
   possible address conflicts
- Increase number of slices to 17 for multi-slice fw
- Fix a bug where packets dropped because of link_overflow could
     be occasionally reported as bad_crc32
- Add selectable failover strategy for dual-port chip: symmetric or primary/backup
- On failover, send RARP broadcast to make the change immediately
  known to the network
- Change endianess for PCI Device Serial Number
- For dual-port NICs, time to failover is now a few microsecs
    instead of a few millisecs.

MFC after:	3 days

Update mxge firmware from 1.4.39 to 1.4.43. Changes include:

2009-06-23T18:00:43+00:00

- Support for 10G-PCIE*-8B*-C (dual-port CX4)  NICs
- For dual-port NICs, f/w failover is now a few microsecs
    instead of a few millisecs.
-  On failover, f/w sends RARP broadcast to make the change
   immediately known to the network
- Fixed a bug observed on IBM X3 architecture where
   some spurious ecrc errors would be reported when OS enabled
   ecrc support.

Sponsored by: Myricom Inc.

Better support for recent Myricom 10GbE NICs

2009-02-17T22:15:58+00:00

- Update to firmware 1.4.39 for dual-chip NIC (10G-PCIE2-xxx)
  support, and SFP+ i2c support

- Identify newer "B" NICs (10G-PCIEx-8B-x) correctly, rather than
  mis-identifying them as "A" NICs (cosmetic only)

- Identify the IFM_10G_LRM ifmedia type, where applicable.

- Identify ifmedia types for SFP+ based NICs

- Update copyright

Sponsored by: Myricom
MFC after: 1 week

Update to Myri10GE Firmware 1.4.36.

2008-10-23T20:07:08+00:00

This update fixes a transmit bug in the multi-queue (MSI-X) firmware
which happens when RDMAs complete out of order, and provides
improved support for the new Myri10GE NIC models (10G-PCIE-8Bx)

Sponsored by: Myricom Inc.

MFC after:3 days