src/sys/modules/bwi, branch main

Remove residual blank line at start of Makefile

2024-07-15T22:43:39+00:00

This is a residual of the $FreeBSD$ removal.

MFC After: 3 days (though I'll just run the command on the branches)
Sponsored by: Netflix

sys: Remove $FreeBSD$: one-line sh pattern

2023-08-16T17:54:58+00:00

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

sys/modules: normalize .CURDIR-relative paths to SRCTOP

2017-03-04T10:10:17+00:00

This simplifies make output/logic

Tested with:	`cd sys/modules; make ALL_MODULES=` on amd64
MFC after:	1 month
Sponsored by:	Dell EMC Isilon

Strip out this cruft; people should be making modules with a complete

2013-11-09T08:11:24+00:00

kernel config environment anyway.

Fix make depend.

2012-05-22T06:33:08+00:00

Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for

2009-05-03T04:01:43+00:00

Broadcom BCM43xx chipsets.  This driver uses the v3 firmware that
needs to be fetched separately.  A port will be committed to create
the bwi firmware module.

The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319

The driver works for 802.11b and 802.11g.

Limitations:
	This doesn't support the 802.11a or 802.11n portion of radios.
	Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
	Documenation for this firmware is reverse engineered from
		 http://bcm.sipsolutions.net/
	V4 of the firmware is needed for 11a or 11n support
		 http://bcm-v4.sipsolutions.net/
	Firmware needs to be fetched from a third party, port to be committed

# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.

Obtained from:	DragonFlyBSD, //depot/projects/vap
Reviewed by:	sam@, thompsa@