Add DPAA2 console support for MC and AIOP (latter untested) for FDT
systems.  ACPI systems are prepared but need some proper bus function
in order to get the address from MC (and likely a file splitup then).
This will come at a later stage once other ACPI/FDT bus parts are
cleared up.
The work was originally done in July 2022 and finally switched to
bus_space[1] lately to be ready for main.

Suggested by:	andrew [1]
Reviewed by:	dsl
Differential Revision: https://reviews.freebsd.org/D38592

(cherry picked from commit 72ef722b2a34b8f94fd639b05881242686480f05)

DPAA2 is a hardware-level networking architecture found in some NXP
SoCs which contain hardware blocks including Management Complex
(MC, a command interface to manipulate DPAA2 objects), Wire Rate I/O
processor (WRIOP, packets distribution, queuing, drop decisions),
Queues and Buffers Manager (QBMan, Rx/Tx queues control, Rx buffer
pools) and the others.

The Management Complex runs NXP-supplied firmware which provides DPAA2
objects as an abstraction layer over those blocks to simplify an
access to the underlying hardware. Each DPAA2 object has its own
driver (to perform an initialization at least) and will be visible
as a separate device in the device tree.

Two new drivers (dpaa2_mc and dpaa2_rc) act like firmware buses in
order to form a hierarchy of the DPAA2 devices:

	acpiX (or simplebusX)
	  dpaa2_mcX
	    dpaa2_rcX
	      dpaa2_mcp0
	      ...
	      dpaa2_mcpN
	      dpaa2_bpX
	      dpaa2_macX
	      dpaa2_io0
	      ...
	      dpaa2_ioM
	      dpaa2_niX

dpaa2_mc is suppossed to be a root of the hierarchy, comes in ACPI
and FDT flavours and implements helper interfaces to allocate and
assign bus resources, MSI and "managed" DPAA2 devices (NXP treats some
of the objects as resources for the other DPAA2 objects to let them
function properly). Almost all of the DPAA2 objects are assigned to
the resource containers (dpaa2_rc) to implement isolation.

The initial implementation focuses on the DPAA2 network interface
to be operational. It is the most complex object in terms of
dependencies which uses I/O objects to transmit/receive packets.

Approved by:		bz (mentor)
Tested by:		manu, bz
Differential Revision:	https://reviews.freebsd.org/D36638

(cherry picked from commit ba7319e9091b4f6ef15a9c4be3d3d076f3047f72)
(cherry picked from commit 7fb975c8fb970b35fc34561ed30a0fe220346cb6)
(cherry picked from commit 2782ed8f6cd3d7f59219a783bc7fa7bbfb1fe26f)
(cherry picked from commit d6eabdac2ef444b62aba186c793fbd5d4226b157)
(cherry picked from commit 16295b0a5a577aa70f47d3b3314277e631caee63)
(cherry picked from commit ff270fce1631cdfbf8d3d76b9a9f5342b78972c9)