src/udev, branch zfs-0.7.0-rc4 FreeBSD source tree Fix spelling 2017-01-03T17:31:18+00:00 ka7 ka7@la-evento.com 2017-01-03T17:31:18+00:00 4e33ba4c389f59b74138bf7130e924a4230d64e9 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se> Closes #5547 Closes #5543 
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes #5547 
Closes #5543
Allow partition aliases in vdev_id.conf (#5266) 2016-10-14T23:11:16+00:00 Brian Behlendorf behlendorf1@llnl.gov 2016-10-14T23:11:16+00:00 dabb6f4fab38f5a729e8241425a5394ae7fd96d4 When pools are assembled from partitions, vdev_id.conf aliases do not work. The directory /dev/disk/by-vdev is not created because the associated udev rule for parsing vdev_id.conf is never called. Extend to logic to match "disk" and "partition". Patch-proposed-by: @sparksh Reviewed-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3859 Closes #5266 
When pools are assembled from partitions, vdev_id.conf aliases
do not work.  The directory /dev/disk/by-vdev is not created because
the associated udev rule for parsing vdev_id.conf is never called.
Extend to logic to match "disk" and "partition".

Patch-proposed-by: @sparksh
Reviewed-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3859
Closes #5266
Set proper dependency for string replacement targets 2016-08-02T17:28:29+00:00 Chunwei Chen david.chen@osnexus.com 2016-07-29T23:35:33+00:00 5b1bc1a1d8ae284f834f239ab0309c6ce96ab74f A lot of string replacement target don't have dependency or incorrect dependency. We setup proper dependency by pattern rules. Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #4908 
A lot of string replacement target don't have dependency or incorrect
dependency. We setup proper dependency by pattern rules.

Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4908
Add `zfs allow` and `zfs unallow` support 2016-06-07T16:16:52+00:00 Brian Behlendorf behlendorf1@llnl.gov 2016-06-07T16:16:52+00:00 f74b821a6696fef9e9953aae05941e99bf83800e ZFS allows for specific permissions to be delegated to normal users with the `zfs allow` and `zfs unallow` commands. In addition, non- privileged users should be able to run all of the following commands: * zpool [list | iostat | status | get] * zfs [list | get] Historically this functionality was not available on Linux. In order to add it the secpolicy_* functions needed to be implemented and mapped to the equivalent Linux capability. Only then could the permissions on the `/dev/zfs` be relaxed and the internal ZFS permission checks used. Even with this change some limitations remain. Under Linux only the root user is allowed to modify the namespace (unless it's a private namespace). This means the mount, mountpoint, canmount, unmount, and remount delegations cannot be supported with the existing code. It may be possible to add this functionality in the future. This functionality was validated with the cli_user and delegation test cases from the ZFS Test Suite. These tests exhaustively verify each of the supported permissions which can be delegated and ensures only an authorized user can perform it. Two minor bug fixes were required for test-running.py. First, the Timer() object cannot be safely created in a `try:` block when there is an unconditional `finally` block which references it. Second, when running as a normal user also check for scripts using the both the .ksh and .sh suffixes. Finally, existing users who are simulating delegations by setting group permissions on the /dev/zfs device should revert that customization when updating to a version with this change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #362 Closes #434 Closes #4100 Closes #4394 Closes #4410 Closes #4487 
ZFS allows for specific permissions to be delegated to normal users
with the `zfs allow` and `zfs unallow` commands.  In addition, non-
privileged users should be able to run all of the following commands:

  * zpool [list | iostat | status | get]
  * zfs [list | get]

Historically this functionality was not available on Linux.  In order
to add it the secpolicy_* functions needed to be implemented and mapped
to the equivalent Linux capability.  Only then could the permissions on
the `/dev/zfs` be relaxed and the internal ZFS permission checks used.

Even with this change some limitations remain.  Under Linux only the
root user is allowed to modify the namespace (unless it's a private
namespace).  This means the mount, mountpoint, canmount, unmount,
and remount delegations cannot be supported with the existing code.  It
may be possible to add this functionality in the future.

This functionality was validated with the cli_user and delegation test
cases from the ZFS Test Suite.  These tests exhaustively verify each
of the supported permissions which can be delegated and ensures only
an authorized user can perform it.

Two minor bug fixes were required for test-running.py.  First, the
Timer() object cannot be safely created in a `try:` block when there
is an unconditional `finally` block which references it.  Second,
when running as a normal user also check for scripts using the
both the .ksh and .sh suffixes.

Finally, existing users who are simulating delegations by setting
group permissions on the /dev/zfs device should revert that
customization when updating to a version with this change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #362 
Closes #434 
Closes #4100
Closes #4394 
Closes #4410 
Closes #4487
Support parallel build trees (VPATH builds) 2015-07-17T20:42:51+00:00 Turbo Fredriksson turbo@bayour.com 2014-06-09T21:55:31+00:00 47a4a6fd5fa1f1f60bcf6af19e453ecf0292f7d1 Build products from an out of tree build should be written relative to the build directory. Sources should be referred to by their locations in the source directory. This is accomplished by adding the 'src' and 'obj' variables for the module Makefile.am, using relative paths to reference source files, and by setting VPATH when source files are not co-located with the Makefile. This enables the following: $ mkdir build $ cd build $ ../configure \ --with-spl=$HOME/src/git/spl/ \ --with-spl-obj=$HOME/src/git/spl/build $ make -s This change also has the advantage of resolving the following warning which is generated by modern versions of automake. Makefile.am:00: warning: source file 'xxx' is in a subdirectory, Makefile.am:00: but option 'subdir-objects' is disabled Signed-off-by: Turbo Fredriksson <turbo@bayour.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1082 
Build products from an out of tree build should be written
relative to the build directory.  Sources should be referred
to by their locations in the source directory.

This is accomplished by adding the 'src' and 'obj' variables
for the module Makefile.am, using relative paths to reference
source files, and by setting VPATH when source files are not
co-located with the Makefile.  This enables the following:

  $ mkdir build
  $ cd build
  $ ../configure \
    --with-spl=$HOME/src/git/spl/ \
    --with-spl-obj=$HOME/src/git/spl/build
  $ make -s

This change also has the advantage of resolving the following
warning which is generated by modern versions of automake.

  Makefile.am:00: warning: source file 'xxx' is in a subdirectory,
  Makefile.am:00: but option 'subdir-objects' is disabled

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1082
Open pools asynchronously after module load 2013-07-03T16:24:38+00:00 Brian Behlendorf behlendorf1@llnl.gov 2013-07-02T18:59:51+00:00 91604b298c24c84fe03bc6c028abb961ca3e6fcf One of the side effects of calling zvol_create_minors() in zvol_init() is that all pools listed in the cache file will be opened. Depending on the state and contents of your pool this operation can take a considerable length of time. Doing this at load time is undesirable because the kernel is holding a global module lock. This prevents other modules from loading and can serialize an otherwise parallel boot process. Doing this after module inititialization also reduces the chances of accidentally introducing a race during module init. To ensure that /dev/zvol/<pool>/<dataset> devices are still automatically created after the module load completes a udev rules has been added. When udev notices that the /dev/zfs device has been create the 'zpool list' command will be run. This then will cause all the pools listed in the zpool.cache file to be opened. Because this process in now driven asynchronously by udev there is the risk of problems in downstream distributions. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #756 Issue #1020 Issue #1234 
One of the side effects of calling zvol_create_minors() in
zvol_init() is that all pools listed in the cache file will
be opened.  Depending on the state and contents of your pool
this operation can take a considerable length of time.

Doing this at load time is undesirable because the kernel
is holding a global module lock.  This prevents other modules
from loading and can serialize an otherwise parallel boot
process.  Doing this after module inititialization also
reduces the chances of accidentally introducing a race
during module init.

To ensure that /dev/zvol/<pool>/<dataset> devices are
still automatically created after the module load completes
a udev rules has been added.  When udev notices that the
/dev/zfs device has been create the 'zpool list' command
will be run.  This then will cause all the pools listed
in the zpool.cache file to be opened.

Because this process in now driven asynchronously by udev
there is the risk of problems in downstream distributions.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #756
Issue #1020
Issue #1234
Retire zpool_id infrastructure 2013-01-29T20:23:17+00:00 Brian Behlendorf behlendorf1@llnl.gov 2013-01-29T18:53:19+00:00 dbf763b39b232996f0d6bb0022e4446643c18e05 In the interest of maintaining only one udev helper to give vdevs user friendly names, the zpool_id and zpool_layout infrastructure is being retired. They are superseded by vdev_id which incorporates all the previous functionality. Documentation for the new vdev_id(8) helper and its configuration file, vdev_id.conf(5), can be found in their respective man pages. Several useful example files are installed under /etc/zfs/. /etc/zfs/vdev_id.conf.alias.example /etc/zfs/vdev_id.conf.multipath.example /etc/zfs/vdev_id.conf.sas_direct.example /etc/zfs/vdev_id.conf.sas_switch.example Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #981 
In the interest of maintaining only one udev helper to give vdevs
user friendly names, the zpool_id and zpool_layout infrastructure
is being retired.  They are superseded by vdev_id which incorporates
all the previous functionality.

Documentation for the new vdev_id(8) helper and its configuration
file, vdev_id.conf(5), can be found in their respective man pages.
Several useful example files are installed under /etc/zfs/.

  /etc/zfs/vdev_id.conf.alias.example
  /etc/zfs/vdev_id.conf.multipath.example
  /etc/zfs/vdev_id.conf.sas_direct.example
  /etc/zfs/vdev_id.conf.sas_switch.example

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #981
Update 69-vdev.rules .gitignore 2012-12-14T20:16:42+00:00 Brian Behlendorf behlendorf1@llnl.gov 2012-12-14T19:45:41+00:00 bd192c4f4831fae78f9dc3264b8c1a9b6dc85307 Commit 2957f38 renamed 60-vdev.rules to 69-vdev.rules but failed to update the .gitignore file to reflect this change. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> 
Commit 2957f38 renamed 60-vdev.rules to 69-vdev.rules but failed
to update the .gitignore file to reflect this change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
vdev_id support for device link aliases 2012-12-03T22:04:47+00:00 Ned Bass bass6@llnl.gov 2012-11-29T19:08:37+00:00 2957f38d78d376431ab18d2f576099d682d7a711 Add a vdev_id feature to map device names based on already defined udev device links. To increase the odds that vdev_id will run after the rules it depends on, increase the vdev.rules rule number from 60 to 69. With this change, vdev_id now provides functionality analogous to zpool_id and zpool_layout, paving the way to retire those tools. A defined alias takes precedence over a topology-derived name, but the two naming methods can otherwise coexist. For example, one might name drives in a JBOD with the sas_direct topology while naming an internal L2ARC device with an alias. For example, the following lines in vdev_id.conf will result in the creation of links /dev/disk/by-vdev/{d1,d2}, each pointing to the same target as the device link specified in the third field. # by-vdev # name fully qualified or base name of device link alias d1 /dev/disk/by-id/wwn-0x5000c5002de3b9ca alias d2 wwn-0x5000c5002def789e Also perform some minor vdev_id cleanup, such as removal of the unused -s command line option. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #981 
Add a vdev_id feature to map device names based on already defined
udev device links.  To increase the odds that vdev_id will run after
the rules it depends on, increase the vdev.rules rule number from 60
to 69.  With this change, vdev_id now provides functionality analogous
to zpool_id and zpool_layout, paving the way to retire those tools.

A defined alias takes precedence over a topology-derived name, but the
two naming methods can otherwise coexist. For example, one might name
drives in a JBOD with the sas_direct topology while naming an internal
L2ARC device with an alias.

For example, the following lines in vdev_id.conf will result in the
creation of links /dev/disk/by-vdev/{d1,d2}, each pointing to the same
target as the device link specified in the third field.

  #     by-vdev
  #     name     fully qualified or base name of device link
  alias d1       /dev/disk/by-id/wwn-0x5000c5002de3b9ca
  alias d2       wwn-0x5000c5002def789e

Also perform some minor vdev_id cleanup, such as removal of the unused
-s command line option.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #981
Fix hard coded path in 60-vdev.rules.in 2012-11-13T20:04:15+00:00 Richard Yao ryao@cs.stonybrook.edu 2012-11-12T17:34:45+00:00 2af96a5df53cfc281dc5c5f72eac5bb2b1739733 The udev data directory was hard coded in 60-vdev.rules.in. That causes a problem when a distribution changes the location of the directory. This was not an issue in the past because virtually all distributions used the same path, but that is beginning to change following a decision by the systemd developers to change the directory location to reflect their take-over of udev maintainership. The testing branch of Gentoo Linux adopted this change, which enabled the hardcoded directory location to trigger a regression. Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #1085 
The udev data directory was hard coded in 60-vdev.rules.in. That causes
a problem when a distribution changes the location of the directory.
This was not an issue in the past because virtually all distributions
used the same path, but that is beginning to change following a decision
by the systemd developers to change the directory location to reflect
their take-over of udev maintainership. The testing branch of Gentoo
Linux adopted this change, which enabled the hardcoded directory
location to trigger a regression.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1085