CTRL -> <keycap>Ctrl</keycap>

SPACE -> <keycap>Space</keycap>
ALT -> <keycap>Alt</keycap>
ENTER -> <keycap>Enter</keycap>
and so on...

Reviewed by:	chern

5 files changed, 38 insertions, 35 deletions

diff --git a/en_US.ISO8859-1/books/handbook/basics/chapter.sgml b/en_US.ISO8859-1/books/handbook/basics/chapter.sgml
index 8240e8f841..2c23e6824f 100644
--- a/en_US.ISO8859-1/books/handbook/basics/chapter.sgml
+++ b/en_US.ISO8859-1/books/handbook/basics/chapter.sgml
@@ -1,7 +1,7 @@
 <!--
      The FreeBSD Documentation Project
 
-     $FreeBSD: doc/en_US.ISO8859-1/books/handbook/basics/chapter.sgml,v 1.42 2001/08/21 23:42:50 murray Exp $
+     $FreeBSD: doc/en_US.ISO8859-1/books/handbook/basics/chapter.sgml,v 1.43 2001/08/22 07:16:36 murray Exp $
 -->
 
 <chapter id="basics">
@@ -499,7 +499,7 @@ Swap: 256M Total, 38M Used, 217M Free, 15% Inuse
 	<command>/bin/kill -s KILL 1</command> is a quick way to shutdown your
 	system.  <emphasis>Always</emphasis> double check the arguments you
 	run &man.kill.1; with <emphasis>before</emphasis> you press
-	<keycap>RETURN</keycap>.</para>
+	<keycap>Return</keycap>.</para>
     </important>
   </sect1>
 
@@ -531,11 +531,11 @@ Swap: 256M Total, 38M Used, 217M Free, 15% Inuse
     <para>One common feature in a shell is file-name completion.  Given
       the typing of the first few letters of a command or filename, you
       can usually have the shell automatically complete the rest of the
-      command or filename by hitting the TAB key on the keyboard.  Here is
+      command or filename by hitting the <keycap>Tab</keycap> key on the keyboard.  Here is
       an example.  Suppose you have two files called
       <filename>foobar</filename> and <filename>foo.bar</filename>.  You
       want to delete <filename>foo.bar</filename>.  So what you would type
-      on the keyboard is: <command>rm fo[TAB].[TAB]</command>.</para>
+      on the keyboard is: <command>rm fo[<keycap>Tab</keycap>].[<keycap>Tab</keycap>]</command>.</para>
 
     <para>The shell would print out <command>rm
       foo[BEEP].bar</command>.</para>
@@ -545,7 +545,7 @@ Swap: 256M Total, 38M Used, 217M Free, 15% Inuse
       than one match.  Both <filename>foobar</filename> and
       <filename>foo.bar</filename> start with <literal>fo</literal>, but
       it was able to complete to <literal>foo</literal>.  If you type in
-      <literal>.</literal>, then hit TAB again, the shell would be able to
+      <literal>.</literal>, then hit <keycap>Tab</keycap> again, the shell would be able to
       fill in the rest of the filename for you.</para>
     <indexterm><primary>environment variables</primary></indexterm>
 
diff --git a/en_US.ISO8859-1/books/handbook/boot/chapter.sgml b/en_US.ISO8859-1/books/handbook/boot/chapter.sgml
index 4fa6c7c0d7..d3417bb9ab 100644
--- a/en_US.ISO8859-1/books/handbook/boot/chapter.sgml
+++ b/en_US.ISO8859-1/books/handbook/boot/chapter.sgml
@@ -1,7 +1,7 @@
 <!--
      The FreeBSD Documentation Project
 
-     $FreeBSD: doc/en_US.ISO8859-1/books/handbook/boot/chapter.sgml,v 1.24 2001/08/11 21:49:11 jim Exp $
+     $FreeBSD: doc/en_US.ISO8859-1/books/handbook/boot/chapter.sgml,v 1.25 2001/08/16 18:35:01 chern Exp $
 -->
 
 <chapter id="boot">
@@ -217,7 +217,7 @@ boot:</screen>
 	  will create a dangerously dedicated disk, without slices.  This is
 	  almost certainly not what you want to do, so make sure you double
 	  check the &man.disklabel.8; command before you press
-	  <keycap>RETURN</keycap>.</para>
+	  <keycap>Return</keycap>.</para>
       </warning>
     </sect2>
 
diff --git a/en_US.ISO8859-1/books/handbook/install/chapter.sgml b/en_US.ISO8859-1/books/handbook/install/chapter.sgml
index 917c87be57..c661930b2e 100644
--- a/en_US.ISO8859-1/books/handbook/install/chapter.sgml
+++ b/en_US.ISO8859-1/books/handbook/install/chapter.sgml
@@ -1,7 +1,7 @@
 <!--
      The FreeBSD Documentation Project
 
-     $FreeBSD: doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml,v 1.101 2001/08/30 16:55:23 nik Exp $
+     $FreeBSD: doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml,v 1.102 2001/08/30 21:47:38 logo Exp $
 -->
 
 <chapter id="install">
@@ -1121,8 +1121,8 @@ Mounting root from ufs:/dev/md0c
       </figure>
 
       <para>A different keyboard mapping may be chosen by selecting the
-	menu item using up/down arrow keys and pressing <keycap>SPACE</keycap>.
-	Pressing <keycap>SPACE</keycap> again will unselect the item. When
+	menu item using up/down arrow keys and pressing <keycap>Space</keycap>.
+	Pressing <keycap>Space</keycap> again will unselect the item. When
 	finished, choose the [OK] item using the arrow keys and press
 	<keycap>Enter</keycap>.</para>
 
@@ -2471,7 +2471,7 @@ installation menus to try and retry whichever operations have failed.
 	</mediaobject>
       </figure>
 
-      <para>Use <keycap>TAB</keycap> to select the information fields and
+      <para>Use <keycap>Tab</keycap> to select the information fields and
 	fill in appropriate information:</para>
 
       <variablelist>
@@ -2547,7 +2547,7 @@ installation menus to try and retry whichever operations have failed.
 
       </variablelist>
 
-      <para>Use <keycap>TAB</keycap> to select [OK] when finished and press
+      <para>Use <keycap>Tab</keycap> to select [OK] when finished and press
 	<keycap>Enter</keycap>.</para>
 
 
@@ -2623,7 +2623,7 @@ use the current settings.
 	</mediaobject>
       </figure>
 
-      <para>After adding the desired services, pressing <keycap>ESC</keycap>
+      <para>After adding the desired services, pressing <keycap>Esc</keycap>
 	will display a menu which will allow exiting and saving 
 	the changes.</para>
 
@@ -2788,7 +2788,7 @@ Press [Enter] now to invoke an editor on /etc/exports
 	  now or later using a text editor of your choice.  Note the
 	  filename/location at the bottom.</para>
 
-	<para>Press <keycap>ESC</keycap> and a pop-up menu will default to
+	<para>Press <keycap>Esc</keycap> and a pop-up menu will default to
 	  "a) leave editor".  Press <keycap>Enter</keycap> to exit and
 	  continue.</para>
       </sect3>
@@ -2908,7 +2908,7 @@ To change any of these settings later, edit /etc/rc.conf
       </figure>
 
       <para>First, select the desired screen saver using the arrow keys
-	and then press <keycap>SPACE</keycap>. The "X" will indicate the
+	and then press <keycap>Space</keycap>. The "X" will indicate the
 	selected screensaver.</para>
 
       <figure id="saver-select">
@@ -2923,7 +2923,7 @@ To change any of these settings later, edit /etc/rc.conf
 
       <para>The default time interval is 300 seconds.  To change the time
 	interval, select "Timeout" using the arrow keys and press
-	<keycap>SPACE</keycap>.  A pop-up menu will appear :</para>
+	<keycap>Space</keycap>.  A pop-up menu will appear :</para>
 
       <figure id="saver-timeout">
 	<title>Screensaver Timeout</title>
@@ -3098,7 +3098,7 @@ To change any of these settings later, edit /etc/rc.conf
 
       <para>The mouse in this example is a PS/2 type, so the default "Auto" was
 	appropriate.  To change protocol, use the arrow keys and then
-	press <keycap>SPACE</keycap>.  Select [OK] and press
+	press <keycap>Space</keycap>.  Select [OK] and press
 	<keycap>Enter</keycap> to exit this menu.</para>
 
       <figure id="config-mouse-port">
@@ -3292,7 +3292,7 @@ To change any of these settings later, edit /etc/rc.conf
 	  settings.  If nothing appears or appears wrong, kill the x-server
 	  using
 	  <keycombo action='simul'>
-	    <keycap>CTRL</keycap><keycap>ALT</keycap><keycap>BACKSPACE</keycap>
+	    <keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>Backspace</keycap>
 	  </keycombo>
 	  and adjust the settings or revisit them after installation.</para>
       </sect3>
@@ -3329,7 +3329,7 @@ when you've finished.</screen>
 
 	<para>If it does not appear or is distorted, kill the server with 
 	  <keycombo action='simul'>
-	    <keycap>CTRL</keycap><keycap>ALT</keycap><keycap>BACKSPACE</keycap>
+	    <keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>Backspace</keycap>
 	  </keycombo>
 	  to continue and configure the x-server after installation using
 	  <command>/stand/sysinstall</command>.</para>
@@ -3408,7 +3408,7 @@ when you've finished.</screen>
 	<filename>/stand/sysinstall</filename>.</para>
 
       <para>The bash shell is shown selected. Select as many as desired
-	by highlighting the item and pressing the <keycap>SPACE</keycap>.
+	by highlighting the item and pressing the <keycap>Space</keycap>.
 	A short description of each package will appear in the lower left
 	corner of the screen.</para>
 
@@ -3491,7 +3491,7 @@ when you've finished.</screen>
       </figure>
 
       <para>The following descriptions will appear in the lower part of
-	the screen as the items are selected with <keycap>TAB</keycap></para>
+	the screen as the items are selected with <keycap>Tab</keycap></para>
 
       <variablelist>
 	<varlistentry>
@@ -3659,9 +3659,9 @@ when you've finished.</screen>
 
       <para>If everything goes well, you will see similar messages scroll
 	off the screen and you will arrive at a login prompt.  You can view
-	the content of the messages by pressing <keycap>SCROLL-LOCK</keycap>
+	the content of the messages by pressing <keycap>Scroll-Lock</keycap>
 	and using <keycap>PgUp</keycap> and <keycap>PgDn</keycap>.
-	Pressing <keycap>SCROLL-LOCK</keycap> again will return
+	Pressing <keycap>Scroll-Lock</keycap> again will return
 	to the prompt.</para>
 
       <para>The entire message may not display (buffer limitation) but
diff --git a/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml b/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml
index 83f88ae128..ebb83deb0f 100644
--- a/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml
+++ b/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml
@@ -1,7 +1,7 @@
 <!--
      The FreeBSD Documentation Project
 
-     $FreeBSD: doc/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml,v 1.44 2001/08/16 18:35:07 chern Exp $
+     $FreeBSD: doc/en_US.ISO8859-1/books/handbook/serialcomms/chapter.sgml,v 1.45 2001/08/22 05:37:50 murray Exp $
 -->
 
 <chapter id="serialcomms">
@@ -1735,14 +1735,16 @@ big-university 5551114</programlisting>
     
     <sect2>
       <title>Why Do I Have to Hit 
-	<keycombo action="simul">
-	  <keycap>Ctrl</keycap><keycap>P</keycap>
-	</keycombo>
-        Twice to Send 
-	<keycombo action="simul">
-	  <keycap>Ctrl</keycap><keycap>P</keycap>
-	</keycombo>
-	Once?</title>
+        <keycombo action="simul">
+          <keycap>Ctrl</keycap>  
+          <keycap>P</keycap>
+        </keycombo>
+        Twice to Send
+        <keycombo action="simul">
+          <keycap>Ctrl</keycap>
+          <keycap>P</keycap>
+        </keycombo>
+        Once?</title>
 	  
       <para><keycombo action="simul"><keycap>Ctrl</keycap><keycap>P</keycap></keycombo> is the default <quote>force</quote> character, used to tell
 	<command>tip</command> that the next character is literal data.  You
@@ -1761,7 +1763,7 @@ big-university 5551114</programlisting>
 	</keycombo>
 	or
 	<keycombo action="simul">
-	  <keycap>Ctrl</keycap><keycap>SPACE</keycap>
+	  <keycap>Ctrl</keycap><keycap>Space</keycap>
 	</keycombo>.
 	A pretty good value for <replaceable>single-char</replaceable> is
 	<keycombo action="simul">
diff --git a/en_US.ISO8859-1/books/handbook/x11/chapter.sgml b/en_US.ISO8859-1/books/handbook/x11/chapter.sgml
index 9d738eb88f..eb737e6673 100644
--- a/en_US.ISO8859-1/books/handbook/x11/chapter.sgml
+++ b/en_US.ISO8859-1/books/handbook/x11/chapter.sgml
@@ -1,7 +1,7 @@
 <!--
      The FreeBSD Documentation Project
 
-     $FreeBSD: doc/en_US.ISO8859-1/books/handbook/x11/chapter.sgml,v 1.49 2001/08/16 18:42:51 chern Exp $
+     $FreeBSD: doc/en_US.ISO8859-1/books/handbook/x11/chapter.sgml,v 1.50 2001/08/22 05:37:50 murray Exp $
 -->
 
 <chapter id="x11">
@@ -178,7 +178,8 @@
 
       <para>If the user is presented with a black and grey grid and an
 	X mouse cursor, then the configuration was successful.  To exit
-	the test, just press ctrl, alt and backspace simultaneously.</para>
+	the test, just press <keycap>Ctrl</keycap>, <keycap>Alt</keycap>
+	and <keycap>Backspace</keycap> simultaneously.</para>
 
       <indexterm><primary>XFree86 4 Tuning</primary></indexterm>