aboutsummaryrefslogtreecommitdiff
path: root/en_US.ISO8859-1/htdocs/releases/5.4R/installation-amd64.html
diff options
context:
space:
mode:
Diffstat (limited to 'en_US.ISO8859-1/htdocs/releases/5.4R/installation-amd64.html')
-rw-r--r--en_US.ISO8859-1/htdocs/releases/5.4R/installation-amd64.html1593
1 files changed, 0 insertions, 1593 deletions
diff --git a/en_US.ISO8859-1/htdocs/releases/5.4R/installation-amd64.html b/en_US.ISO8859-1/htdocs/releases/5.4R/installation-amd64.html
deleted file mode 100644
index ce0746ec5f..0000000000
--- a/en_US.ISO8859-1/htdocs/releases/5.4R/installation-amd64.html
+++ /dev/null
@@ -1,1593 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
- "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml">
-<head>
-<meta name="generator" content="HTML Tidy, see www.w3.org" />
-<title>FreeBSD/amd64 5.4-RELEASE Installation Instructions</title>
-<meta name="GENERATOR" content="Modular DocBook HTML Stylesheet Version 1.79" />
-<link rel="STYLESHEET" type="text/css" href="docbook.css" />
-<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
-</head>
-<body class="ARTICLE" bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#840084"
-alink="#0000FF">
-<div class="ARTICLE">
-<div class="TITLEPAGE">
-<h1 class="TITLE"><a id="AEN2" name="AEN2">FreeBSD/amd64 5.4-RELEASE Installation
-Instructions</a></h1>
-
-<h3 class="CORPAUTHOR">The FreeBSD Project</h3>
-
-<p class="COPYRIGHT">Copyright &copy; 2000, 2001, 2002, 2003, 2004 The FreeBSD
-Documentation Project</p>
-
-<hr />
-</div>
-
-<blockquote class="ABSTRACT">
-<div class="ABSTRACT"><a id="AEN12" name="AEN12"></a>
-<p>This article gives some brief instructions on installing FreeBSD/amd64 5.4-RELEASE,
-with particular emphasis given to obtaining a FreeBSD distribution. Some notes on
-troubleshooting and frequently-asked questions are also given.</p>
-</div>
-</blockquote>
-
-<div class="SECT1">
-<hr />
-<h2 class="SECT1"><a id="INSTALL" name="INSTALL">1 Installing FreeBSD</a></h2>
-
-<p>This section documents the process of installing a new distribution of FreeBSD. These
-instructions pay particular emphasis to the process of obtaining the FreeBSD 5.4-RELEASE
-distribution and to beginning the installation procedure. The <a
-href="http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/install.html"
-target="_top">``Installing FreeBSD''</a> chapter of the <a
-href="http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/" target="_top">FreeBSD
-Handbook</a> provides more in-depth information about the installation program itself,
-including a guided walkthrough with screenshots.</p>
-
-<p>If you are upgrading from a previous release of FreeBSD, please see <a
-href="#UPGRADING">Section 3</a> for instructions on upgrading.</p>
-
-<div class="SECT2">
-<hr />
-<h3 class="SECT2"><a id="GETTING-STARTED" name="GETTING-STARTED">1.1 Getting
-Started</a></h3>
-
-<p>Probably the most important pre-installation step that can be taken is that of reading
-the various instruction documents provided with FreeBSD. A roadmap of documents
-pertaining to this release of FreeBSD can be found in <tt
-class="FILENAME">README.TXT</tt>, which can usually be found in the same location as this
-file; most of these documents, such as the release notes and the hardware compatibility
-list, are also accessible in the Documentation menu of the installer.</p>
-
-<p>Note that on-line versions of the FreeBSD <a
-href="http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/faq/" target="_top">FAQ</a> and <a
-href="http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/"
-target="_top">Handbook</a> are also available from the <a href="http://www.FreeBSD.org/"
-target="_top">FreeBSD Project Web site</a>, if you have an Internet connection.</p>
-
-<p>This collection of documents may seem daunting, but the time spent reading them will
-likely be saved many times over. Being familiar with what resources are available can
-also be helpful in the event of problems during installation.</p>
-
-<p>The best laid plans sometimes go awry, so if you run into trouble take a look at <a
-href="#TROUBLE">Section 4</a>, which contains valuable troubleshooting information. You
-should also read an updated copy of <tt class="FILENAME">ERRATA.TXT</tt> before
-installing, since this will alert you to any problems which have reported in the interim
-for your particular release.</p>
-
-<div class="IMPORTANT">
-<blockquote class="IMPORTANT">
-<p><b>Important:</b> While FreeBSD does its best to safeguard against accidental loss of
-data, it's still more than possible to <span class="emphasis"><i class="EMPHASIS">wipe
-out your entire disk</i></span> with this installation if you make a mistake. Please do
-not proceed to the final FreeBSD installation menu unless you've adequately backed up any
-important data first.</p>
-</blockquote>
-</div>
-</div>
-
-<div class="SECT2">
-<hr />
-<h3 class="SECT2"><a id="AEN37" name="AEN37">1.2 Hardware Requirements</a></h3>
-
-<p>FreeBSD for the AMD64 requires an Athlon64, Athlon64-FX, Opteron or better processor
-to run.</p>
-
-<p>If you have an machine based on an nVidia nForce3 Pro-150, you MUST use the BIOS setup
-to disable the IO APIC. If you do not have an option to do this, you will likely have to
-disable ACPI instead. There are bugs in the Pro-150 chipset that we have not found a
-workaround for yet.</p>
-
-<p>If you are not familiar with configuring hardware for FreeBSD, you should be sure to
-read the <tt class="FILENAME">HARDWARE.TXT</tt> file; it contains important information
-on what hardware is supported by FreeBSD.</p>
-</div>
-
-<div class="SECT2">
-<hr />
-<h3 class="SECT2"><a id="FLOPPIES" name="FLOPPIES">1.3 Floppy Disk Image
-Instructions</a></h3>
-
-<p>Floppy disk based install is not supported on FreeBSD/amd64.</p>
-</div>
-
-<div class="SECT2">
-<hr />
-<h3 class="SECT2"><a id="START-INSTALLATION" name="START-INSTALLATION">1.4 Installing
-FreeBSD from CDROM or the Internet</a></h3>
-
-<p>The easiest type of installation is from CDROM. If you have a supported CDROM drive
-and a FreeBSD installation CDROM, there are 2 ways of starting the installation from
-it:</p>
-
-<ul>
-<li>
-<p>If your system supports the ``CDBOOT'' standard for bootable CDROM media and you have
-booting from CD enabled, simply put the FreeBSD installation CD in your CDROM drive and
-boot the system to begin installation.</p>
-</li>
-
-<li>
-<p>Build a set of FreeBSD boot floppies from the <tt class="FILENAME">floppies/</tt>
-directory in every FreeBSD distribution. Read <a href="#FLOPPIES">Section 1.3</a> for
-more information on creating the bootable floppies under different operating systems.
-Then you simply boot from the first floppy and you should soon be in the FreeBSD
-installation.</p>
-</li>
-</ul>
-
-<br />
-<br />
-</div>
-
-<div class="SECT2">
-<hr />
-<h3 class="SECT2"><a id="AEN212" name="AEN212">1.5 Detail on various installation
-types</a></h3>
-
-<p>Once you've gotten yourself to the initial installation screen somehow, you should be
-able to follow the various menu prompts and go from there. If you've never used the
-FreeBSD installation before, you are also encouraged to read some of the documentation in
-the Documentation submenu as well as the general ``Usage'' instructions on the first
-menu.</p>
-
-<div class="NOTE">
-<blockquote class="NOTE">
-<p><b>Note:</b> If you get stuck at a screen, press the <b class="KEYCAP">F1</b> key for
-online documentation relevant to that specific section.</p>
-</blockquote>
-</div>
-
-<p>If you've never installed FreeBSD before, or even if you have, the ``Standard''
-installation mode is the most recommended since it makes sure that you'll visit all the
-various important checklist items along the way. If you're much more comfortable with the
-FreeBSD installation process and know <span class="emphasis"><i
-class="EMPHASIS">exactly</i></span> what you want to do, use the ``Express'' or
-``Custom'' installation options. If you're upgrading an existing system, use the
-``Upgrade'' option.</p>
-
-<p>The FreeBSD installer supports the direct use of floppy, DOS, tape, CDROM, FTP, NFS
-and UFS partitions as installation media; further tips on installing from each type of
-media are listed below.</p>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="AEN251" name="AEN251">1.5.1 Installing from a Network
-CDROM</a></h4>
-
-<p>If you simply wish to install from a local CDROM drive then see <a
-href="#START-INSTALLATION">Section 1.4</a>. If you don't have a CDROM drive on your
-system and wish to use a FreeBSD distribution CD in the CDROM drive of another system to
-which you have network connectivity, there are also several ways of going about it:</p>
-
-<ul>
-<li>
-<p>If you would be able to FTP install FreeBSD directly from the CDROM drive in some
-FreeBSD machine, it's quite easy: You ensure an FTP server is running and then simply add
-the following line to the password file (using the <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=vipw&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">vipw</span>(8)</span></a>
-command):</p>
-
-<pre class="SCREEN">
-ftp:*:99:99::0:0:FTP:/cdrom:/sbin/nologin
-</pre>
-
-<p>On the machine on which you are running the install, go to the Options menu and set
-Release Name to <tt class="LITERAL">any</tt>. You may then choose a Media type of <tt
-class="LITERAL">FTP</tt> and type in <tt class="FILENAME">ftp://<tt
-class="REPLACEABLE"><i>machine</i></tt></tt> after picking ``URL'' in the ftp sites
-menu.</p>
-
-<div class="WARNING">
-<blockquote class="WARNING">
-<p><b>Warning:</b> This may allow anyone on the local network (or Internet) to make
-``anonymous FTP'' connections to this machine, which may not be desirable.</p>
-</blockquote>
-</div>
-</li>
-
-<li>
-<p>If you would rather use NFS to export the CDROM directly to the machine(s) you'll be
-installing from, you need to first add an entry to the <tt
-class="FILENAME">/etc/exports</tt> file (on the machine with the CDROM drive). The
-example below allows the machine <tt class="HOSTID">ziggy.foo.com</tt> to mount the CDROM
-directly via NFS during installation:</p>
-
-<pre class="SCREEN">
-/cdrom -ro ziggy.foo.com
-</pre>
-
-<p>The machine with the CDROM must also be configured as an NFS server, of course, and if
-you're not sure how to do that then an NFS installation is probably not the best choice
-for you unless you're willing to read up on <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=rc.conf&sektion=5&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">rc.conf</span>(5)</span></a> and
-configure things appropriately. Assuming that this part goes smoothly, you should be able
-to enter: <tt class="FILENAME"><tt class="REPLACEABLE"><i>cdrom-host</i></tt>:/cdrom</tt>
-as the path for an NFS installation when the target machine is installed, e.g. <tt
-class="FILENAME">wiggy:/cdrom</tt>.</p>
-</li>
-</ul>
-</div>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="AEN283" name="AEN283">1.5.2 Installing from Floppies</a></h4>
-
-<p>If you must install from floppy disks, either due to unsupported hardware or just
-because you enjoy doing things the hard way, you must first prepare some floppies for the
-install.</p>
-
-<p>First, make your boot floppies as described in <a href="#FLOPPIES">Section
-1.3</a>.</p>
-
-<p>Second, peruse <a href="#LAYOUT">Section 2</a> and pay special attention to the
-``Distribution Format'' section since it describes which files you're going to need to
-put onto floppy and which you can safely skip.</p>
-
-<p>Next you will need, at minimum, as many 1.44MB floppies as it takes to hold all files
-in the <tt class="FILENAME">bin</tt> (binary distribution) directory. If you're preparing
-these floppies under DOS, then these floppies <span class="emphasis"><i
-class="EMPHASIS">must</i></span> be formatted using the MS-DOS <tt
-class="FILENAME">FORMAT</tt> command. If you're using Windows, use the Windows File
-Manager format command.</p>
-
-<div class="IMPORTANT">
-<blockquote class="IMPORTANT">
-<p><b>Important:</b> Frequently, floppy disks come ``factory preformatted''. While
-convenient, many problems reported by users in the past have resulted from the use of
-improperly formatted media. Re-format them yourself, just to make sure.</p>
-</blockquote>
-</div>
-
-<p>If you're creating the floppies from another FreeBSD machine, a format is still not a
-bad idea though you don't need to put a DOS filesystem on each floppy. You can use the <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=disklabel&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">disklabel</span>(8)</span></a> and
-<a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=newfs&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">newfs</span>(8)</span></a>
-commands to put a UFS filesystem on a floppy, as the following sequence of commands
-illustrates:</p>
-
-<pre class="SCREEN">
-<samp class="PROMPT">#</samp> <kbd class="USERINPUT">fdformat -f 1440 fd0</kbd>
-<samp class="PROMPT">#</samp> <kbd class="USERINPUT">disklabel -w fd0 floppy3</kbd>
-<samp class="PROMPT">#</samp> <kbd class="USERINPUT">newfs -i 65536 /dev/fd0</kbd>
-</pre>
-
-<p>After you've formatted the floppies for DOS or UFS, you'll need to copy the files onto
-them. The distribution files are sized so that a floppy disk will hold a single file.
-Each distribution should go into its own subdirectory on the floppy, e.g.: <tt
-class="FILENAME">a:\bin\bin.inf</tt>, <tt class="FILENAME">a:\bin\bin.aa</tt>, <tt
-class="FILENAME">a:\bin\bin.ab</tt>, ...</p>
-
-<div class="IMPORTANT">
-<blockquote class="IMPORTANT">
-<p><b>Important:</b> The <tt class="FILENAME">bin.inf</tt> file also needs to go on the
-first floppy of the <tt class="FILENAME">bin</tt> set since it is read by the
-installation program in order to figure out how many additional pieces to look for when
-fetching and concatenating the distribution. When putting distributions onto floppies,
-the <tt class="FILENAME">distname.inf</tt> file <span class="emphasis"><i
-class="EMPHASIS">must</i></span> occupy the first floppy of each distribution set.</p>
-</blockquote>
-</div>
-
-<p>Once you come to the Media screen of the install, select ``Floppy'' and you'll be
-prompted for the rest.</p>
-</div>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="AEN324" name="AEN324">1.5.3 Installing from a DOS
-partition</a></h4>
-
-<p>To prepare for installation from an MS-DOS partition you should simply copy the files
-from the distribution into a directory called <tt class="FILENAME">FREEBSD</tt> on the
-Primary DOS partition (<tt class="DEVICENAME">C:</tt>). For example, to do a minimal
-installation of FreeBSD from DOS using files copied from the CDROM, you might do
-something like this:</p>
-
-<pre class="SCREEN">
-<samp class="PROMPT">C:\&#62;</samp> <kbd class="USERINPUT">MD C:\FREEBSD</kbd>
-<samp class="PROMPT">C:\&#62;</samp> <kbd
-class="USERINPUT">XCOPY /S E:\BASE C:\FREEBSD\BASE</kbd>
-</pre>
-
-<p>Assuming that <tt class="DEVICENAME">E:</tt> was where your CD was mounted.</p>
-
-<p>For as many distributions as you wish to install from DOS (and you have free space
-for), install each one in a directory under <tt class="FILENAME">C:\FREEBSD</tt> - the
-<tt class="FILENAME">BIN</tt> dist is only the minimal requirement.</p>
-
-<p>Once you've copied the directories, you can simply launch the installation from
-floppies as normal and select ``DOS'' as your media type when the time comes.</p>
-</div>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="AEN352" name="AEN352">1.5.4 Installing from QIC/SCSI
-Tape</a></h4>
-
-<p>When installing from tape, the installation program expects the files to be simply
-tar'ed onto it, so after fetching all of the files for the distributions you're
-interested in, simply use <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=tar&sektion=1&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">tar</span>(1)</span></a> to get
-them onto the tape with a command something like this:</p>
-
-<pre class="SCREEN">
-<samp class="PROMPT">#</samp> <kbd class="USERINPUT">cd <tt
-class="REPLACEABLE"><i>/where/you/have/your/dists</i></tt></kbd>
-<samp class="PROMPT">#</samp> <kbd class="USERINPUT">tar cvf /dev/sa0 <tt
-class="REPLACEABLE"><i>dist1</i></tt> .. <tt class="REPLACEABLE"><i>dist2</i></tt></kbd>
-</pre>
-
-<p>When you go to do the installation, you should also make sure that you leave enough
-room in some temporary directory (which you'll be allowed to choose) to accommodate the
-<span class="emphasis"><i class="EMPHASIS">full</i></span> contents of the tape you've
-created. Due to the non-random access nature of tapes, this method of installation
-requires quite a bit of temporary storage. You should expect to require as much temporary
-storage as you have stuff written on tape.</p>
-
-<div class="NOTE">
-<blockquote class="NOTE">
-<p><b>Note:</b> When going to do the installation, the tape must be in the drive <span
-class="emphasis"><i class="EMPHASIS">before</i></span> booting from the boot floppies.
-The installation ``probe'' may otherwise fail to find it.</p>
-</blockquote>
-</div>
-
-<p>Now create a boot floppy as described in <a href="#FLOPPIES">Section 1.3</a> and
-proceed with the installation.</p>
-</div>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="FTPNFS" name="FTPNFS">1.5.5 Installing over a Network using FTP
-or NFS</a></h4>
-
-<p>After making the boot floppies as described in the first section, you can load the
-rest of the installation over a network using one of 3 types of connections: serial port,
-parallel port, or Ethernet.</p>
-
-<div class="SECT4">
-<hr />
-<h5 class="SECT4"><a id="AEN377" name="AEN377">1.5.5.1 Serial Port</a></h5>
-
-<p>SLIP support is rather primitive, and is limited primarily to hard-wired links, such
-as a serial cable running between two computers. The link must be hard-wired because the
-SLIP installation doesn't currently offer a dialing capability. If you need to dial out
-with a modem or otherwise dialog with the link before connecting to it, then the PPP
-utility should be used instead.</p>
-
-<p>If you're using PPP, make sure that you have your Internet Service Provider's IP
-address and DNS information handy as you'll need to know it fairly early in the
-installation process. You may also need to know your own IP address, though PPP supports
-dynamic address negotiation and may be able to pick up this information directly from
-your ISP if they support it.</p>
-
-<p>You will also need to know how to use the various ``AT commands'' for dialing out with
-your particular brand of modem as the PPP dialer provides only a very simple terminal
-emulator.</p>
-</div>
-
-<div class="SECT4">
-<hr />
-<h5 class="SECT4"><a id="AEN383" name="AEN383">1.5.5.2 Parallel Port</a></h5>
-
-<p>If a hard-wired connection to another FreeBSD or Linux machine is available, you might
-also consider installing over a ``laplink'' style parallel port cable. The data rate over
-the parallel port is much higher than what is typically possible over a serial line (up
-to 50k/sec), thus resulting in a quicker installation. It's not typically necessary to
-use ``real'' IP addresses when using a point-to-point parallel cable in this way and you
-can generally just use RFC 1918 style addresses for the ends of the link (e.g. <tt
-class="HOSTID">10.0.0.1</tt>, <tt class="HOSTID">10.0.0.2</tt>, etc).</p>
-
-<div class="IMPORTANT">
-<blockquote class="IMPORTANT">
-<p><b>Important:</b> If you use a Linux machine rather than a FreeBSD machine as your
-PLIP peer, you will also have to specify <code class="OPTION">link0</code> in the TCP/IP
-setup screen's ``extra options for ifconfig'' field in order to be compatible with
-Linux's slightly different PLIP protocol.</p>
-</blockquote>
-</div>
-</div>
-
-<div class="SECT4">
-<hr />
-<h5 class="SECT4"><a id="AEN394" name="AEN394">1.5.5.3 Ethernet</a></h5>
-
-<p>FreeBSD supports most common Ethernet cards; a table of supported cards is provided as
-part of the FreeBSD Hardware Notes (see <tt class="FILENAME">HARDWARE.TXT</tt> in the
-Documentation menu on the boot floppy or the top level directory of the CDROM). If you
-are using one of the supported PCMCIA Ethernet cards, also be sure that it's plugged in
-<span class="emphasis"><i class="EMPHASIS">before</i></span> the laptop is powered on.
-FreeBSD does not, unfortunately, currently support ``hot insertion'' of PCMCIA cards
-during installation.</p>
-
-<p>You will also need to know your IP address on the network, the <code
-class="OPTION">netmask</code> value for your subnet and the name of your machine. Your
-system administrator can tell you which values are appropriate to your particular network
-setup. If you will be referring to other hosts by name rather than IP address, you'll
-also need a name server and possibly the address of a gateway (if you're using PPP, it's
-your provider's IP address) to use in talking to it. If you want to install by FTP via an
-HTTP proxy (see below), you will also need the proxy's address.</p>
-
-<p>If you do not know the answers to these questions then you should really probably talk
-to your system administrator <span class="emphasis"><i class="EMPHASIS">first</i></span>
-before trying this type of installation. Using a randomly chosen IP address or netmask on
-a live network is almost guaranteed not to work, and will probably result in a lecture
-from said system administrator.</p>
-
-<p>Once you have a network connection of some sort working, the installation can continue
-over NFS or FTP.</p>
-</div>
-
-<div class="SECT4">
-<hr />
-<h5 class="SECT4"><a id="AEN405" name="AEN405">1.5.5.4 NFS installation tips</a></h5>
-
-<p>NFS installation is fairly straight-forward: Simply copy the FreeBSD distribution
-files you want onto a server somewhere and then point the NFS media selection at it.</p>
-
-<p>If this server supports only ``privileged port'' access (this is generally the default
-for Sun and Linux workstations), you may need to set this option in the Options menu
-before installation can proceed.</p>
-
-<p>If you have a poor quality Ethernet card which suffers from very slow transfer rates,
-you may also wish to toggle the appropriate Options flag.</p>
-
-<p>In order for NFS installation to work, the server must also support ``subdir mounts'',
-e.g. if your FreeBSD distribution directory lives on <tt
-class="FILENAME">wiggy:/usr/archive/stuff/FreeBSD</tt>, then <tt
-class="HOSTID">wiggy</tt> will have to allow the direct mounting of <tt
-class="FILENAME">/usr/archive/stuff/FreeBSD</tt>, not just <tt class="FILENAME">/usr</tt>
-or <tt class="FILENAME">/usr/archive/stuff</tt>.</p>
-
-<p>In FreeBSD's <tt class="FILENAME">/etc/exports</tt> file this is controlled by the
-<code class="OPTION">-alldirs</code> option. Other NFS servers may have different
-conventions. If you are getting <tt class="LITERAL">Permission Denied</tt> messages from
-the server then it's likely that you don't have this properly enabled.</p>
-</div>
-
-<div class="SECT4">
-<hr />
-<h5 class="SECT4"><a id="AEN422" name="AEN422">1.5.5.5 FTP Installation tips</a></h5>
-
-<p>FTP installation may be done from any mirror site containing a reasonably up-to-date
-version of FreeBSD. A full menu of reasonable choices for almost any location in the
-world is provided in the FTP site menu during installation.</p>
-
-<p>If you are installing from some other FTP site not listed in this menu, or you are
-having troubles getting your name server configured properly, you can also specify your
-own URL by selecting the ``URL'' choice in that menu. A URL can contain a hostname or an
-IP address, so something like the following would work in the absence of a name
-server:</p>
-
-<pre class="SCREEN">
-ftp://216.66.64.162/pub/FreeBSD/releases/amd64/4.2-RELEASE
-</pre>
-
-<p>There are three FTP installation modes you can use:</p>
-
-<ul>
-<li>
-<p>FTP: This method uses the standard ``Active'' mode for transfers, in which the server
-initiates a connection to the client. This will not work through most firewalls but will
-often work best with older FTP servers that do not support passive mode. If your
-connection hangs with passive mode, try this one.</p>
-</li>
-
-<li>
-<p>FTP Passive: This sets the FTP "Passive" mode which prevents the server from opening
-connections to the client. This option is best for users to pass through firewalls that
-do not allow incoming connections on random port addresses.</p>
-</li>
-
-<li>
-<p>FTP via an HTTP proxy: This option instructs FreeBSD to use HTTP to connect to a proxy
-for all FTP operations. The proxy will translate the requests and send them to the FTP
-server. This allows the user to pass through firewalls that do not allow FTP at all, but
-offer an HTTP proxy. You must specify the hostname of the proxy in addition to the FTP
-server.</p>
-
-<p>In the rare case that you have an FTP proxy that does not go through HTTP, you can
-specify the URL as something like:</p>
-
-<pre class="SCREEN">
-<kbd class="USERINPUT">ftp://foo.bar.com:<tt
-class="REPLACEABLE"><i>port</i></tt>/pub/FreeBSD</kbd>
-</pre>
-
-<p>In the URL above, <tt class="REPLACEABLE"><i>port</i></tt> is the port number of the
-proxy FTP server.</p>
-</li>
-</ul>
-
-<br />
-<br />
-</div>
-</div>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="AEN443" name="AEN443">1.5.6 Tips for Serial Console
-Users</a></h4>
-
-<p>If you'd like to install FreeBSD on a machine using just a serial port (e.g. you don't
-have or wish to use a VGA card), please follow these steps:</p>
-
-<div class="PROCEDURE">
-<ol type="1">
-<li class="STEP">
-<p>Connect some sort of ANSI (vt100) compatible terminal or terminal emulation program to
-the <tt class="DEVICENAME">COM1</tt> port of the PC you are installing FreeBSD onto.</p>
-</li>
-
-<li class="STEP">
-<p>Unplug the keyboard (yes, that's correct!) and then try to boot from floppy or the
-installation CDROM, depending on the type of installation media you have, with the
-keyboard unplugged.</p>
-</li>
-
-<li class="STEP">
-<p>If you don't get any output on your serial console, plug the keyboard in again. If you
-are booting from the CDROM, proceed to <a href="#HITSPACE">step 5</a> as soon as you hear
-the beep.</p>
-</li>
-
-<li class="STEP">
-<p>If booting from floppies, when access to the disk stops, insert the first of the <tt
-class="FILENAME">kern<tt class="REPLACEABLE"><i>X</i></tt>.flp</tt> disks and press <b
-class="KEYCAP">Enter</b>. When access to this disk finishes, insert the next <tt
-class="FILENAME">kern<tt class="REPLACEABLE"><i>X</i></tt>.flp</tt> disk and press <b
-class="KEYCAP">Enter</b>, and repeat until all <tt class="FILENAME">kern<tt
-class="REPLACEABLE"><i>X</i></tt>.flp</tt> disks have been inserted. When disk activity
-finishes, reinsert the <tt class="FILENAME">boot.flp</tt> floppy disk and press <b
-class="KEYCAP">Enter</b>.</p>
-</li>
-
-<li class="STEP"><a id="HITSPACE" name="HITSPACE"></a>
-<p>Once a beep is heard, hit the number <b class="KEYCAP">6</b>, then enter</p>
-
-<pre class="SCREEN">
-<kbd class="USERINPUT">boot -h</kbd>
-</pre>
-
-<p>and you should now definitely be seeing everything on the serial port. If that still
-doesn't work, check your serial cabling as well as the settings on your terminal
-emulation program or actual terminal device. It should be set for 9600 baud, 8 bits, no
-parity.</p>
-</li>
-</ol>
-</div>
-</div>
-</div>
-
-<div class="SECT2">
-<hr />
-<h3 class="SECT2"><a id="AEN473" name="AEN473">1.6 Question and Answer Section for AMD64
-Architecture Users</a></h3>
-
-<div class="QANDASET">
-<dl>
-<dt>1.6.1. <a href="#Q1.6.1.">Help! I have no space! Do I need to delete everything
-first?</a></dt>
-
-<dt>1.6.2. <a href="#Q1.6.2.">Can I use compressed DOS filesystems from FreeBSD?</a></dt>
-
-<dt>1.6.3. <a href="#Q1.6.3.">Can I mount my DOS extended partitions?</a></dt>
-
-<dt>1.6.4. <a href="#Q1.6.4.">Can I run DOS binaries under FreeBSD?</a></dt>
-
-<dt>1.6.5. <a href="#Q1.6.5.">Can I run <span
-class="TRADEMARK">Microsoft</span>&reg;&nbsp;<span class="TRADEMARK">Windows</span>&reg;
-applications under FreeBSD?</a></dt>
-
-<dt>1.6.6. <a href="#Q1.6.6.">Can I run other Operating Systems under FreeBSD?</a></dt>
-</dl>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q1.6.1." name="Q1.6.1."></a><b>1.6.1.</b> Help! I have no space! Do I need to
-delete everything first?</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>If your machine is already running DOS and has little or no free space
-available for FreeBSD's installation, all is not lost! You may find the <b
-class="APPLICATION">FIPS</b> utility, provided in the <tt class="FILENAME">tools/</tt>
-subdirectory on the FreeBSD CDROM or on the various FreeBSD ftp sites, to be quite
-useful.</p>
-
-<p><b class="APPLICATION">FIPS</b> allows you to split an existing DOS partition into two
-pieces, preserving the original partition and allowing you to install onto the second
-free piece. You first ``defrag'' your DOS partition, using the DOS 6.xx <tt
-class="FILENAME">DEFRAG</tt> utility or the <b class="APPLICATION">Norton Disk Tools</b>,
-then run FIPS. It will prompt you for the rest of the information it needs. Afterwards,
-you can reboot and install FreeBSD on the new partition. Also note that FIPS will create
-the second partition as a ``clone'' of the first, so you'll actually see that you now
-have two DOS Primary partitions where you formerly had one. Don't be alarmed! You can
-simply delete the extra DOS Primary partition (making sure it's the right one by
-examining its size).</p>
-
-<p><b class="APPLICATION">FIPS</b> does NOT currently work with NTFS style partitions. To
-split up such a partition, you will need a commercial product such as <b
-class="APPLICATION">Partition Magic</b>. Sorry, but this is just the breaks if you've got
-a Windows partition hogging your whole disk and you don't want to reinstall from
-scratch.</p>
-
-<p><b class="APPLICATION">FIPS</b> does not work on extended DOS partitions. Windows
-95/98/ME FAT32 primary partitions are supported.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q1.6.2." name="Q1.6.2."></a><b>1.6.2.</b> Can I use compressed DOS filesystems
-from FreeBSD?</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>No. If you are using a utility such as <b class="APPLICATION">Stacker</b>(tm)
-or <b class="APPLICATION">DoubleSpace</b>(tm), FreeBSD will only be able to use whatever
-portion of the filesystem you leave uncompressed. The rest of the filesystem will show up
-as one large file (the stacked/dblspaced file!). <span class="emphasis"><i
-class="EMPHASIS">Do not remove that file</i></span> as you will probably regret it
-greatly!</p>
-
-<p>It is probably better to create another uncompressed DOS extended partition and use
-this for communications between DOS and FreeBSD if such is your desire.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q1.6.3." name="Q1.6.3."></a><b>1.6.3.</b> Can I mount my DOS extended
-partitions?</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>Yes. DOS extended partitions are mapped in at the end of the other ``slices''
-in FreeBSD, e.g. your <tt class="DEVICENAME">D:</tt> drive might be <tt
-class="FILENAME">/dev/da0s5</tt>, your <tt class="DEVICENAME">E:</tt> drive <tt
-class="FILENAME">/dev/da0s6</tt>, and so on. This example assumes, of course, that your
-extended partition is on SCSI drive 0. For IDE drives, substitute <tt
-class="LITERAL">ad</tt> for <tt class="LITERAL">da</tt> appropriately. You otherwise
-mount extended partitions exactly like you would mount any other DOS drive, e.g.:</p>
-
-<pre class="SCREEN">
-<samp class="PROMPT">#</samp> <kbd
-class="USERINPUT">mount -t msdos /dev/da0s5 /dos_d</kbd>
-</pre>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q1.6.4." name="Q1.6.4."></a><b>1.6.4.</b> Can I run DOS binaries under
-FreeBSD?</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>Ongoing work with BSDI's <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=doscmd&sektion=1&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">doscmd</span>(1)</span></a>
-utility will suffice in many cases, though it still has some rough edges. The <a
-href="http://www.FreeBSD.org/cgi/url.cgi?ports/emulators/doscmd/pkg-descr"><tt
-class="FILENAME">emulators/doscmd</tt></a> port/package can be found in the FreeBSD Ports
-Collection. If you're interested in working on this, please send mail to the <a
-href="http://lists.FreeBSD.org/mailman/listinfo/freebsd-emulation"
-target="_top">FreeBSD-emulation mailing list</a> and indicate that you're interested in
-joining this ongoing effort!</p>
-
-<p>The <a href="http://www.FreeBSD.org/cgi/url.cgi?ports/emulators/pcemu/pkg-descr"><tt
-class="FILENAME">emulators/pcemu</tt></a> port/package in the FreeBSD Ports Collection
-which emulates an 8088 and enough BIOS services to run DOS text mode applications. It
-requires the X Window System (XFree86) to operate.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q1.6.5." name="Q1.6.5."></a><b>1.6.5.</b> Can I run <span
-class="TRADEMARK">Microsoft</span>&reg;&nbsp;<span class="TRADEMARK">Windows</span>&reg;
-applications under FreeBSD?</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>There are several ports/packages in the FreeBSD Ports Collection which can
-enable the use of many <span class="TRADEMARK">Windows</span> applications. The <a
-href="http://www.FreeBSD.org/cgi/url.cgi?ports/emulators/wine/pkg-descr"><tt
-class="FILENAME">emulators/wine</tt></a> port/package provides a compatibility layer on
-top of FreeBSD which allow many <span class="TRADEMARK">Windows</span> applications to be
-run within X Windows (XFree86).</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q1.6.6." name="Q1.6.6."></a><b>1.6.6.</b> Can I run other Operating Systems
-under FreeBSD?</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>Again, there are several ports/packages in the FreeBSD Ports Collection which
-simulate "virtual machines" and allow other operating systems to run on top of FreeBSD.
-The <a href="http://www.FreeBSD.org/cgi/url.cgi?ports/emulators/bochs/pkg-descr"><tt
-class="FILENAME">emulators/bochs</tt></a> port/package allows <span
-class="TRADEMARK">Microsoft</span>&nbsp;<span class="TRADEMARK">Windows</span>, Linux and
-even other copies of FreeBSD to be run within a window on the FreeBSD desktop. The <a
-href="http://www.FreeBSD.org/cgi/url.cgi?ports/emulators/vmware2/pkg-descr"><tt
-class="FILENAME">emulators/vmware2</tt></a> and <a
-href="http://www.FreeBSD.org/cgi/url.cgi?ports/emulators/vmware3/pkg-descr"><tt
-class="FILENAME">emulators/vmware3</tt></a> ports/packages allow the commercial VMware
-virtual machine software to be run on FreeBSD.</p>
-</div>
-</div>
-</div>
-</div>
-</div>
-
-<div class="SECT1">
-<hr />
-<h2 class="SECT1"><a id="LAYOUT" name="LAYOUT">2 Distribution Format</a></h2>
-
-<p>A typical FreeBSD distribution directory looks something like this (exact details may
-vary depending on version, architecture, and other factors):</p>
-
-<pre class="SCREEN">
-ERRATA.HTM README.TXT compat1x dict kernel
-ERRATA.TXT RELNOTES.HTM compat20 doc manpages
-HARDWARE.HTM RELNOTES.TXT compat21 docbook.css packages
-HARDWARE.TXT base compat22 filename.txt ports
-INSTALL.HTM boot compat3x floppies proflibs
-INSTALL.TXT catpages compat4x games src
-README.HTM cdrom.inf crypto info tools
-</pre>
-
-<p>These same files are contained in the first CDROM of a multi-disk set, but they are
-laid out slightly differently on the disk. On most architectures, the installation CDROM
-also contains a ``live filesystem'' in addition to the distribution files. The live
-filesystem is useful when repairing or troubleshooting an existing FreeBSD installation
-(see <a href="#TROUBLE">Section 4</a> for how to use this).</p>
-
-<p>The <tt class="FILENAME">floppies</tt> directory will be of particular interest to
-users who are unable to boot from the CDROM media (but are able to read the CDROM by
-other means). It is easy to generate a set of 1.44MB boot floppies from the <tt
-class="FILENAME">floppies</tt> directory (see <a href="#FLOPPIES">Section 1.3</a> for
-instructions on how to do this) and use these to start an installation from CDROM, FTP,
-or NFS. The rest of the data needed during the installation will be obtained
-automatically based on your selections. If you've never installed FreeBSD before, you
-also want to read the entirety of this document (the installation instructions) file.</p>
-
-<p>If you're trying to do some other type of installation or are merely curious about how
-a distribution is organized, what follows is a more thorough description of some of these
-items in more detail:</p>
-
-<ol type="1">
-<li>
-<p>The <tt class="FILENAME">*.TXT</tt> and <tt class="FILENAME">*.HTM</tt> files contain
-documentation (for example, this document is contained in both <tt
-class="FILENAME">INSTALL.TXT</tt> and <tt class="FILENAME">INSTALL.HTM</tt>) and should
-be read before starting an installation. The <tt class="FILENAME">*.TXT</tt> files are
-plain text, while the <tt class="FILENAME">*.HTM</tt> files are HTML files that can be
-read by almost any Web browser. Some distributions may contain documentation in other
-formats as well, such as PDF or PostScript.</p>
-</li>
-
-<li>
-<p><tt class="FILENAME">docbook.css</tt> is a Cascading Style Sheet (CSS) file used by
-some Web browsers for formatting the HTML documentation.</p>
-</li>
-
-<li>
-<p>The <tt class="FILENAME">base</tt>, <tt class="FILENAME">catpages</tt>, <tt
-class="FILENAME">crypto</tt>, <tt class="FILENAME">dict</tt>, <tt
-class="FILENAME">doc</tt>, <tt class="FILENAME">games</tt>, <tt
-class="FILENAME">info</tt>, <tt class="FILENAME">manpages</tt>, <tt
-class="FILENAME">proflibs</tt>, and <tt class="FILENAME">src</tt> directories contain the
-primary distribution components of FreeBSD itself and are split into smaller files for
-easy packing onto floppies (should that be necessary).</p>
-</li>
-
-<li>
-<p>The <tt class="FILENAME">compat1x</tt>, <tt class="FILENAME">compat20</tt>, <tt
-class="FILENAME">compat21</tt>, <tt class="FILENAME">compat22</tt>, <tt
-class="FILENAME">compat3x</tt>, and <tt class="FILENAME">compat4x</tt> directories
-contain distributions for compatibility with older releases and are distributed as single
-gzip'd tar files - they can be installed during release time or later by running their
-<tt class="FILENAME">install.sh</tt> scripts.</p>
-</li>
-
-<li>
-<p>The <tt class="FILENAME">floppies/</tt> subdirectory contains the floppy installation
-images; further information on using them can be found in <a href="#FLOPPIES">Section
-1.3</a>.</p>
-</li>
-
-<li>
-<p>The <tt class="FILENAME">packages</tt> and <tt class="FILENAME">ports</tt> directories
-contain the FreeBSD Packages and Ports Collections. Packages may be installed from the
-packages directory by running the command:</p>
-
-<pre class="SCREEN">
-<samp class="PROMPT">#</samp><kbd
-class="USERINPUT">/stand/sysinstall configPackages</kbd>
-</pre>
-
-<p>Packages can also be installed by feeding individual filenames in <tt
-class="FILENAME">packages</tt>/ to the <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=pkg_add&sektion=1&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">pkg_add</span>(1)</span></a>
-command.</p>
-
-<p>The Ports Collection may be installed like any other distribution and requires about
-190MB unpacked. More information on the ports collection may be obtained from <a
-href="http://www.FreeBSD.org/ports/" target="_top">http://www.FreeBSD.org/ports/</a> or
-locally from <tt class="FILENAME">/usr/share/doc/handbook</tt> if you've installed the
-<tt class="FILENAME">doc</tt> distribution.</p>
-</li>
-
-<li>
-<p>Last of all, the <tt class="FILENAME">tools</tt> directory contains various DOS tools
-for discovering disk geometries, installing boot managers and the like. It is purely
-optional and provided only for user convenience.</p>
-</li>
-</ol>
-
-<br />
-<br />
-<p>A typical distribution directory (for example, the <tt class="FILENAME">info</tt>
-distribution) looks like this internally:</p>
-
-<pre class="SCREEN">
-CHECKSUM.MD5 info.ab info.ad info.inf install.sh
-info.aa info.ac info.ae info.mtree
-</pre>
-
-<p>The <tt class="FILENAME">CHECKSUM.MD5</tt> file contains MD5 signatures for each file,
-should data corruption be suspected, and is purely for reference. It is not used by the
-actual installation and does not need to be copied with the rest of the distribution
-files. The <tt class="FILENAME">info.a*</tt> files are split, gzip'd tar files, the
-contents of which can be viewed by doing:</p>
-
-<pre class="SCREEN">
-<samp class="PROMPT">#</samp> <kbd class="USERINPUT">cat info.a* | tar tvzf -</kbd>
-</pre>
-
-<p>During installation, they are automatically concatenated and extracted by the
-installation procedure.</p>
-
-<p>The <tt class="FILENAME">info.inf</tt> file is also necessary since it is read by the
-installation program in order to figure out how many pieces to look for when fetching and
-concatenating the distribution. When putting distributions onto floppies, the <tt
-class="FILENAME">.inf</tt> file <span class="emphasis"><i
-class="EMPHASIS">must</i></span> occupy the first floppy of each distribution set!</p>
-
-<p>The <tt class="FILENAME">info.mtree</tt> file is another non-essential file which is
-provided for user reference. It contains the MD5 signatures of the <span
-class="emphasis"><i class="EMPHASIS">unpacked</i></span> distribution files and can be
-later used with the <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=mtree&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">mtree</span>(8)</span></a> program
-to verify the installation permissions and checksums against any possible modifications
-to the file. When used with the <tt class="FILENAME">base</tt> distribution, this can be
-an excellent way of detecting trojan horse attacks on your system.</p>
-
-<p>Finally, the <tt class="FILENAME">install.sh</tt> file is for use by those who want to
-install the distribution after installation time. To install the info distribution from
-CDROM after a system was installed, for example, you'd do:</p>
-
-<pre class="SCREEN">
-<samp class="PROMPT">#</samp> <kbd class="USERINPUT">cd /cdrom/info</kbd>
-<samp class="PROMPT">#</samp> <kbd class="USERINPUT">sh install.sh</kbd>
-</pre>
-</div>
-
-<div class="SECT1">
-<hr />
-<h2 class="SECT1"><a id="UPGRADING" name="UPGRADING">3 Upgrading FreeBSD</a></h2>
-
-<p>These instructions describe a procedure for doing a binary upgrade from an older
-version of FreeBSD.</p>
-
-<div class="WARNING">
-<blockquote class="WARNING">
-<p><b>Warning:</b> While the FreeBSD upgrade procedure does its best to safeguard against
-accidental loss of data, it is still more than possible to <span class="emphasis"><i
-class="EMPHASIS">wipe out your entire disk</i></span> with this installation! Please do
-not accept the final confirmation request unless you have adequately backed up any
-important data files.</p>
-</blockquote>
-</div>
-
-<div class="IMPORTANT">
-<blockquote class="IMPORTANT">
-<p><b>Important:</b> These notes assume that you are using the version of <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=sysinstall&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sysinstall</span>(8)</span></a>
-supplied with the version of FreeBSD to which you intend to upgrade. Using a mismatched
-version of <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=sysinstall&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sysinstall</span>(8)</span></a> is
-almost guaranteed to cause problems and has been known to leave systems in an unusable
-state. The most commonly made mistake in this regard is the use of an old copy of <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=sysinstall&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sysinstall</span>(8)</span></a>
-from an existing installation to upgrade to a newer version of FreeBSD. This is <span
-class="emphasis"><i class="EMPHASIS">not</i></span> recommended.</p>
-</blockquote>
-</div>
-
-<div class="WARNING">
-<blockquote class="WARNING">
-<p><b>Warning:</b> Binary upgrades to FreeBSD 5.4-RELEASE from FreeBSD 4-STABLE are not
-supported at this time. There are some files present in a FreeBSD 4-STABLE whose presence
-can be disruptive, but are not removed by a binary upgrade. One notable example is that
-an old <tt class="FILENAME">/usr/include/g++</tt> directory will cause C++ programs to
-compile incorrectly (or not at all).</p>
-
-<p>These upgrade instructions are provided for the use of users upgrading from relatively
-recent FreeBSD 5-STABLE snapshots.</p>
-</blockquote>
-</div>
-
-<div class="SECT2">
-<hr />
-<h3 class="SECT2"><a id="AEN701" name="AEN701">3.1 Introduction</a></h3>
-
-<p>The upgrade procedure replaces distributions selected by the user with those
-corresponding to the new FreeBSD release. It preserves standard system configuration
-data, as well as user data, installed packages and other software.</p>
-
-<p>Administrators contemplating an upgrade are encouraged to study this section in its
-entirety before commencing an upgrade. Failure to do so may result in a failed upgrade or
-loss of data.</p>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="AEN705" name="AEN705">3.1.1 Upgrade Overview</a></h4>
-
-<p>Upgrading of a distribution is performed by extracting the new version of the
-component over the top of the previous version. Files belonging to the old distribution
-are not deleted.</p>
-
-<p>System configuration is preserved by retaining and restoring the previous version of
-the following files:</p>
-
-<p><tt class="FILENAME">Xaccel.ini</tt>, <tt class="FILENAME">XF86Config</tt>, <tt
-class="FILENAME">adduser.conf</tt>, <tt class="FILENAME">aliases</tt>, <tt
-class="FILENAME">aliases.db</tt>, <tt class="FILENAME">amd.map</tt>, <tt
-class="FILENAME">crontab</tt>, <tt class="FILENAME">csh.cshrc</tt>, <tt
-class="FILENAME">csh.login</tt>, <tt class="FILENAME">csh.logout</tt>, <tt
-class="FILENAME">cvsupfile</tt>, <tt class="FILENAME">dhclient.conf</tt>, <tt
-class="FILENAME">disktab</tt>, <tt class="FILENAME">dm.conf</tt>, <tt
-class="FILENAME">dumpdates</tt>, <tt class="FILENAME">exports</tt>, <tt
-class="FILENAME">fbtab</tt>, <tt class="FILENAME">fstab</tt>, <tt
-class="FILENAME">ftpusers</tt>, <tt class="FILENAME">gettytab</tt>, <tt
-class="FILENAME">gnats</tt>, <tt class="FILENAME">group</tt>, <tt
-class="FILENAME">hosts</tt>, <tt class="FILENAME">hosts.allow</tt>, <tt
-class="FILENAME">hosts.equiv</tt>, <tt class="FILENAME">hosts.lpd</tt>, <tt
-class="FILENAME">inetd.conf</tt>, <tt class="FILENAME">localtime</tt>, <tt
-class="FILENAME">login.access</tt>, <tt class="FILENAME">login.conf</tt>, <tt
-class="FILENAME">mail</tt>, <tt class="FILENAME">mail.rc</tt>, <tt
-class="FILENAME">make.conf</tt>, <tt class="FILENAME">manpath.config</tt>, <tt
-class="FILENAME">master.passwd</tt>, <tt class="FILENAME">motd</tt>, <tt
-class="FILENAME">namedb</tt>, <tt class="FILENAME">networks</tt>, <tt
-class="FILENAME">newsyslog.conf</tt>, <tt class="FILENAME">nsmb.conf</tt>, <tt
-class="FILENAME">nsswitch.conf</tt>, <tt class="FILENAME">pam.conf</tt>, <tt
-class="FILENAME">passwd</tt>, <tt class="FILENAME">periodic</tt>, <tt
-class="FILENAME">ppp</tt>, <tt class="FILENAME">printcap</tt>, <tt
-class="FILENAME">profile</tt>, <tt class="FILENAME">pwd.db</tt>, <tt
-class="FILENAME">rc.conf</tt>, <tt class="FILENAME">rc.conf.local</tt>, <tt
-class="FILENAME">rc.firewall</tt>, <tt class="FILENAME">rc.local</tt>, <tt
-class="FILENAME">remote</tt>, <tt class="FILENAME">resolv.conf</tt>, <tt
-class="FILENAME">rmt</tt>, <tt class="FILENAME">sendmail.cf</tt>, <tt
-class="FILENAME">sendmail.cw</tt>, <tt class="FILENAME">services</tt>, <tt
-class="FILENAME">shells</tt>, <tt class="FILENAME">skeykeys</tt>, <tt
-class="FILENAME">spwd.db</tt>, <tt class="FILENAME">ssh</tt>, <tt
-class="FILENAME">syslog.conf</tt>, <tt class="FILENAME">ttys</tt>, <tt
-class="FILENAME">uucp</tt></p>
-
-<p>The versions of these files which correspond to the new version are moved to <tt
-class="FILENAME">/etc/upgrade/</tt>. The system administrator may peruse these new
-versions and merge components as desired. Note that many of these files are
-interdependent, and the best merge procedure is to copy all site-specific data from the
-current files into the new.</p>
-
-<p>During the upgrade procedure, the administrator is prompted for a location into which
-all files from <tt class="FILENAME">/etc/</tt> are saved. In the event that local
-modifications have been made to other files, they may be subsequently retrieved from this
-location.</p>
-</div>
-</div>
-
-<div class="SECT2">
-<hr />
-<h3 class="SECT2"><a id="AEN779" name="AEN779">3.2 Procedure</a></h3>
-
-<p>This section details the upgrade procedure. Particular attention is given to items
-which substantially differ from a normal installation.</p>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="AEN782" name="AEN782">3.2.1 Backup</a></h4>
-
-<p>User data and system configuration should be backed up before upgrading. While the
-upgrade procedure does its best to prevent accidental mistakes, it is possible to
-partially or completely destroy data and configuration information.</p>
-</div>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="AEN785" name="AEN785">3.2.2 Mount Filesystems</a></h4>
-
-<p>The disklabel editor is entered with the nominated disk's filesystem devices listed.
-Prior to commencing the upgrade, the administrator should make a note of the device names
-and corresponding mountpoints. These mountpoints should be entered here. <span
-class="emphasis"><i class="EMPHASIS">Do not</i></span> set the ``newfs flag'' for any
-filesystems, as this will cause data loss.</p>
-</div>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="AEN790" name="AEN790">3.2.3 Select Distributions</a></h4>
-
-<p>When selecting distributions, there are no constraints on which must be selected. As a
-general rule, the <tt class="LITERAL">base</tt> distribution should be selected for an
-update, and the <tt class="LITERAL">man</tt> distribution if manpages are already
-installed. Other distributions may be selected beyond those originally installed if the
-administrator wishes to add additional functionality.</p>
-</div>
-
-<div class="SECT3">
-<hr />
-<h4 class="SECT3"><a id="FSTAB" name="FSTAB">3.2.4 After Installation</a></h4>
-
-<p>Once the installation procedure has completed, the administrator is prompted to
-examine the new configuration files. At this point, checks should be made to ensure that
-the system configuration is valid. In particular, the <tt
-class="FILENAME">/etc/rc.conf</tt> and <tt class="FILENAME">/etc/fstab</tt> files should
-be checked.</p>
-</div>
-</div>
-
-<div class="SECT2">
-<hr />
-<h3 class="SECT2"><a id="AEN800" name="AEN800">3.3 Upgrading from Source Code</a></h3>
-
-<p>Those interested in an upgrade method that allows more flexibility and sophistication
-should take a look at <a
-href="http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/cutting-edge.html"
-target="_top">The Cutting Edge</a> in the FreeBSD Handbook. This procedure involves
-rebuilding all of FreeBSD from source code. It requires reliable network connectivity,
-extra disk space, and time, but has advantages for networks and other more complex
-installations. This is roughly the same procedure as is used for track the -STABLE or
--CURRENT development branches.</p>
-
-<p><tt class="FILENAME">/usr/src/UPDATING</tt> contains important information on updating
-a FreeBSD system from source code. It lists various issues resulting from changes in
-FreeBSD that may affect an upgrade.</p>
-</div>
-</div>
-
-<div class="SECT1">
-<hr />
-<h2 class="SECT1"><a id="TROUBLE" name="TROUBLE">4 Troubleshooting</a></h2>
-
-<div class="SECT2">
-<h3 class="SECT2"><a id="REPAIRING" name="REPAIRING">4.1 Repairing an Existing FreeBSD
-Installation</a></h3>
-
-<p>FreeBSD features a ``fixit'' option in the top menu of the <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=sysinstall&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sysinstall</span>(8)</span></a>
-installation program. It provides a shell with common programs from the FreeBSD base
-system; this environment is useful for repairing or troubleshooting an existing FreeBSD
-installation. To use fixit mode, you will also need either the <tt
-class="FILENAME">fixit.flp</tt> floppy, generated in the same fashion as the boot
-floppies, or the ``live filesystem'' CDROM. In multi-disk FreeBSD distributions, the live
-filesystem image is typically located on the installation disk. Note that some UNIX
-system administration experience is required to use the fixit option.</p>
-
-<p>Generally, there are two ways of invoking fixit mode. Users who can boot from the
-FreeBSD installation CDROM, should do so and then choose the ``fixit'' item from the main
-<a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=sysinstall&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sysinstall</span>(8)</span></a>
-menu. Then select the ``CDROM/DVD'' option from the fixit menu.</p>
-
-<p>Users who cannot boot from CDROM, but can boot from floppy disk, require a few more
-steps. In addition to the <tt class="FILENAME">boot.flp</tt> and <tt
-class="FILENAME">kern<tt class="REPLACEABLE"><i>X</i></tt>.flp</tt> disks required for
-installation, create the <tt class="FILENAME">fixit.flp</tt> floppy disk, in the same way
-as the other floppy disks. Follow the instructions for booting the installation program
-from floppy disk until reaching the main <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=sysinstall&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sysinstall</span>(8)</span></a>
-menu. At that point, choose the ``fixit'' item from the main <a
-href="http://www.FreeBSD.org/cgi/man.cgi?query=sysinstall&sektion=8&manpath=FreeBSD+5.4-RELEASE">
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">sysinstall</span>(8)</span></a>
-menu. Then select the ``Floppy'' option from the fixit menu, and insert the <tt
-class="FILENAME">fixit.flp</tt> floppy disk when prompted to do so.</p>
-
-<p>The CDROM and floppy fixit environments are similar, but not identical. Both offer a
-shell with a variety of commands available for checking, repairing and examining
-filesystems and their contents. The CDROM version of fixit provides all of the commands
-and programs available in the FreeBSD base system, through the live filesystem. By
-contrast, the floppy fixit environment can only offer a subset of commands due to space
-constraints.</p>
-
-<p>In the floppy version of fixit, some standalone utilities can be found in <tt
-class="FILENAME">/stand</tt> or <tt class="FILENAME">/mnt2/stand</tt>. In the CDROM
-version of fixit, these same programs can be found in <tt class="FILENAME">/stand</tt> or
-<tt class="FILENAME">/mnt2/rescue</tt> (as well as the rest of the programs from the live
-filesystem, which can be found under <tt class="FILENAME">/mnt</tt>).</p>
-</div>
-
-<div class="SECT2">
-<hr />
-<h3 class="SECT2"><a id="AEN844" name="AEN844">4.2 Common Installation Problems for AMD64
-Architecture Users</a></h3>
-
-<div class="QANDASET">
-<dl>
-<dt>4.2.1. <a href="#Q4.2.1.">My system hangs while probing hardware during boot, or it
-behaves strangely during install, or the floppy drive isn't probed.</a></dt>
-
-<dt>4.2.2. <a href="#Q4.2.2.">My system uses the nVidia nForce3 Pro-150 chipset and I get
-hangs at the end of boot or suddenly starts losing interrupts.</a></dt>
-
-<dt>4.2.3. <a href="#Q4.2.3.">My legacy ISA device used to be recognized in previous
-versions of FreeBSD, but now it's not. What happened?</a></dt>
-
-<dt>4.2.4. <a href="#Q4.2.4.">I go to boot from the hard disk for the first time after
-installing FreeBSD, the kernel loads and probes my hardware, but stops with messages
-like:</a></dt>
-
-<dt>4.2.5. <a href="#Q4.2.5.">I go to boot from the hard disk for the first time after
-installing FreeBSD, but the Boot Manager prompt just prints <tt class="LITERAL">F?</tt>
-at the boot menu each time but the boot won't go any further.</a></dt>
-
-<dt>4.2.6. <a href="#Q4.2.6.">The <span class="CITEREFENTRY"><span
-class="REFENTRYTITLE">mcd</span>(4)</span> driver keeps thinking that it has found a
-device and this stops my Intel EtherExpress card from working.</a></dt>
-
-<dt>4.2.7. <a href="#Q4.2.7.">The system finds my <span class="CITEREFENTRY"><span
-class="REFENTRYTITLE">ed</span>(4)</span> network card, but I keep getting device timeout
-errors.</a></dt>
-
-<dt>4.2.8. <a href="#Q4.2.8.">I booted the install floppy on my IBM ThinkPad (tm) laptop,
-and the keyboard is all messed up.</a></dt>
-
-<dt>4.2.9. <a href="#Q4.2.9.">My system can not find my Intel EtherExpress 16
-card.</a></dt>
-
-<dt>4.2.10. <a href="#Q4.2.10.">When installing on an EISA HP Netserver, my on-board
-AIC-7xxx SCSI controller isn't detected.</a></dt>
-
-<dt>4.2.11. <a href="#Q4.2.11.">I have a Panasonic AL-N1 or Rios Chandler Pentium machine
-and I find that the system hangs before ever getting into the installation now.</a></dt>
-
-<dt>4.2.12. <a href="#Q4.2.12.">I have this CMD640 IDE controller that is said to be
-broken.</a></dt>
-
-<dt>4.2.13. <a href="#Q4.2.13.">On a Compaq Aero notebook, I get the message ``No floppy
-devices found! Please check ...'' when trying to install from floppy.</a></dt>
-
-<dt>4.2.14. <a href="#Q4.2.14.">When installing on a Dell Poweredge XE, Dell proprietary
-RAID controller DSA (Dell SCSI Array) isn't recognized.</a></dt>
-
-<dt>4.2.15. <a href="#Q4.2.15.">I have an IBM EtherJet PCI card, it is detected by the
-<span class="CITEREFENTRY"><span class="REFENTRYTITLE">fxp</span>(4)</span> driver
-correctly, but the lights on the card don't come on and it doesn't connect to the
-network.</a></dt>
-
-<dt>4.2.16. <a href="#Q4.2.16.">When I configure the network during installation on an
-IBM Netfinity 3500, the system freezes.</a></dt>
-
-<dt>4.2.17. <a href="#Q4.2.17.">When I install onto a drive managed by a Mylex PCI RAID
-controller, the system fails to boot (eg. with a <tt class="LITERAL">read error</tt>
-message).</a></dt>
-</dl>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.1." name="Q4.2.1."></a><b>4.2.1.</b> My system hangs while probing
-hardware during boot, or it behaves strangely during install, or the floppy drive isn't
-probed.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>FreeBSD 5.0 and above makes extensive use of the system ACPI service on the
-i386 platform to aid in system configuration if it's detected during boot. Unfortunately,
-some bugs still exist in both the ACPI driver and within system motherboards and BIOS.
-The use of ACPI can be disabled by setting the ``hint.acpi.0.disabled'' hint in the third
-stage boot loader:</p>
-
-<pre class="SCREEN">
-set hint.acpi.0.disabled="1"
-</pre>
-
-<p>This is reset each time the system is booted, so it is necessary to add <tt
-class="LITERAL">hint.acpi.0.disabled="1"</tt> to the file <tt
-class="FILENAME">/boot/loader.conf</tt>. More information about the boot loader can be
-found in the FreeBSD Handbook.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.2." name="Q4.2.2."></a><b>4.2.2.</b> My system uses the nVidia nForce3
-Pro-150 chipset and I get hangs at the end of boot or suddenly starts losing
-interrupts.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>There are problems with the apic on this chipset and/or the bios on every
-machine that we had seen at the time of release. While disabling ACPI as above will work,
-a less drastic option may be to set the ``hint.apic.0.disabled'' hint instead. If you
-have the option in the bios, try disabling the APIC support. Unfortunately some machines
-lack this option.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.3." name="Q4.2.3."></a><b>4.2.3.</b> My legacy ISA device used to be
-recognized in previous versions of FreeBSD, but now it's not. What happened?</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>Some device drivers, like matcd, were removed over time due to lack of
-maintainership or other reasons. Others still exist but are disabled because of their
-intrusive hardware probe routines. The following ISA device drivers fall into this
-category and can re-enabled from the third stage boot loader: aha, ahv, aic, bt, ed, cs,
-sn, ie, fe, le, and lnc. To do this, stop the loader during it's 10 second countdown and
-enter the following at the prompt:</p>
-
-<pre class="SCREEN">
-unset hint.foo.0.disabled
-</pre>
-
-<p>where <tt class="REPLACEABLE"><i>foo</i></tt> is the name of the driver to re-enable.
-This can be set permanently by editing the file <tt
-class="FILENAME">/boot/device.hints</tt> and removing the appropriate ``disabled''
-entry.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.4." name="Q4.2.4."></a><b>4.2.4.</b> I go to boot from the hard disk for
-the first time after installing FreeBSD, the kernel loads and probes my hardware, but
-stops with messages like:</p>
-
-<pre class="SCREEN">
-changing root device to ad1s1a panic: cannot mount root
-</pre>
-
-<p>What is wrong? What can I do?</p>
-
-<p>What is this <tt class="LITERAL">bios_drive:interface(unit,partition)kernel_name</tt>
-thing that is displayed with the boot help?</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>There is a longstanding problem in the case where the boot disk is not the
-first disk in the system. The BIOS uses a different numbering scheme to FreeBSD, and
-working out which numbers correspond to which is difficult to get right.</p>
-
-<p>In the case where the boot disk is not the first disk in the system, FreeBSD can need
-some help finding it. There are two common situations here, and in both of these cases,
-you need to tell FreeBSD where the root filesystem is. You do this by specifying the BIOS
-disk number, the disk type and the FreeBSD disk number for that type.</p>
-
-<p>The first situation is where you have two IDE disks, each configured as the master on
-their respective IDE busses, and wish to boot FreeBSD from the second disk. The BIOS sees
-these as disk 0 and disk 1, while FreeBSD sees them as <tt class="DEVICENAME">ad0</tt>
-and <tt class="DEVICENAME">ad2</tt>.</p>
-
-<p>FreeBSD is on BIOS disk 1, of type <tt class="LITERAL">ad</tt> and the FreeBSD disk
-number is 2, so you would say:</p>
-
-<pre class="SCREEN">
-<kbd class="USERINPUT">1:ad(2,a)kernel</kbd>
-</pre>
-
-<p>Note that if you have a slave on the primary bus, the above is not necessary (and is
-effectively wrong).</p>
-
-<p>The second situation involves booting from a SCSI disk when you have one or more IDE
-disks in the system. In this case, the FreeBSD disk number is lower than the BIOS disk
-number. If you have two IDE disks as well as the SCSI disk, the SCSI disk is BIOS disk 2,
-type <tt class="LITERAL">da</tt> and FreeBSD disk number 0, so you would say:</p>
-
-<pre class="SCREEN">
-<kbd class="USERINPUT">2:da(0,a)kernel</kbd>
-</pre>
-
-<p>To tell FreeBSD that you want to boot from BIOS disk 2, which is the first SCSI disk
-in the system. If you only had one IDE disk, you would use '1:' instead.</p>
-
-<p>Once you have determined the correct values to use, you can put the command exactly as
-you would have typed it in the <tt class="FILENAME">/boot.config</tt> file using a
-standard text editor. Unless instructed otherwise, FreeBSD will use the contents of this
-file as the default response to the <tt class="LITERAL">boot:</tt> prompt.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.5." name="Q4.2.5."></a><b>4.2.5.</b> I go to boot from the hard disk for
-the first time after installing FreeBSD, but the Boot Manager prompt just prints <tt
-class="LITERAL">F?</tt> at the boot menu each time but the boot won't go any further.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>The hard disk geometry was set incorrectly in the Partition editor when you
-installed FreeBSD. Go back into the partition editor and specify the actual geometry of
-your hard disk. You must reinstall FreeBSD again from the beginning with the correct
-geometry.</p>
-
-<p>If you are failing entirely in figuring out the correct geometry for your machine,
-here's a tip: Install a small DOS partition at the beginning of the disk and install
-FreeBSD after that. The install program will see the DOS partition and try to infer the
-correct geometry from it, which usually works.</p>
-
-<p>The following tip is no longer recommended, but is left here for reference:</p>
-
-<a id="AEN907" name="AEN907"></a>
-<blockquote class="BLOCKQUOTE">
-<p>If you are setting up a truly dedicated FreeBSD server or workstation where you don't
-care for (future) compatibility with DOS, Linux or another operating system, you've also
-got the option to use the entire disk (`A' in the partition editor), selecting the
-non-standard option where FreeBSD occupies the entire disk from the very first to the
-very last sector. This will leave all geometry considerations aside, but is somewhat
-limiting unless you're never going to run anything other than FreeBSD on a disk.</p>
-</blockquote>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.6." name="Q4.2.6."></a><b>4.2.6.</b> The <span class="CITEREFENTRY"><span
-class="REFENTRYTITLE">mcd</span>(4)</span> driver keeps thinking that it has found a
-device and this stops my Intel EtherExpress card from working.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>Use the UserConfig utility (see <tt class="FILENAME">HARDWARE.TXT</tt>) and
-disable the probing of the <tt class="DEVICENAME">mcd0</tt> and <tt
-class="DEVICENAME">mcd1</tt> devices. Generally speaking, you should only leave the
-devices that you will be using enabled in your kernel.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.7." name="Q4.2.7."></a><b>4.2.7.</b> The system finds my <span
-class="CITEREFENTRY"><span class="REFENTRYTITLE">ed</span>(4)</span> network card, but I
-keep getting device timeout errors.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>Your card is probably on a different IRQ from what is specified in the kernel
-configuration. The ed driver does not use the `soft' configuration by default (values
-entered using EZSETUP in DOS), but it will use the software configuration if you specify
-<tt class="LITERAL">?</tt> in the IRQ field of your kernel config file.</p>
-
-<p>Either move the jumper on the card to a hard configuration setting (altering the
-kernel settings if necessary), or specify the IRQ as <tt class="LITERAL">-1</tt> in
-UserConfig or <tt class="LITERAL">?</tt> in your kernel config file. This will tell the
-kernel to use the soft configuration.</p>
-
-<p>Another possibility is that your card is at IRQ 9, which is shared by IRQ 2 and
-frequently a cause of problems (especially when you have a VGA card using IRQ 2!). You
-should not use IRQ 2 or 9 if at all possible.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.8." name="Q4.2.8."></a><b>4.2.8.</b> I booted the install floppy on my IBM
-ThinkPad (tm) laptop, and the keyboard is all messed up.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>Older IBM laptops use a non-standard keyboard controller, so you must tell the
-keyboard driver (atkbd0) to go into a special mode which works on the ThinkPads. Change
-the atkbd0 'Flags' to 0x4 in UserConfig and it should work fine. (Look in the Input Menu
-for 'Keyboard'.)</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.9." name="Q4.2.9."></a><b>4.2.9.</b> My system can not find my Intel
-EtherExpress 16 card.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>You must set your Intel EtherExpress 16 card to be memory mapped at address
-0xD0000, and set the amount of mapped memory to 32K using the Intel supplied <tt
-class="FILENAME">softset.exe</tt> program.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.10." name="Q4.2.10."></a><b>4.2.10.</b> When installing on an EISA HP
-Netserver, my on-board AIC-7xxx SCSI controller isn't detected.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>This is a known problem, and will hopefully be fixed in the future. In order to
-get your system installed at all, boot with the <code class="OPTION">-c</code> option
-into UserConfig, but <span class="emphasis"><i class="EMPHASIS">don't</i></span> use the
-pretty visual mode but the plain old CLI mode. Type:</p>
-
-<pre class="SCREEN">
-<kbd class="USERINPUT">eisa 12</kbd>
-<kbd class="USERINPUT">quit</kbd>
-</pre>
-
-<p>at the prompt. (Instead of `quit', you might also type `visual', and continue the rest
-of the configuration session in visual mode.) While it's recommended to compile a custom
-kernel, dset now also understands to save this value.</p>
-
-<p>Refer to the FAQ topic 5.3 for an explanation of the problem, and for how to continue.
-Remember that you can find the FAQ on your local system in /usr/share/doc/FAQ, provided
-you have installed the `doc' distribution.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.11." name="Q4.2.11."></a><b>4.2.11.</b> I have a Panasonic AL-N1 or Rios
-Chandler Pentium machine and I find that the system hangs before ever getting into the
-installation now.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>Your machine doesn't like the new <tt class="LITERAL">i586_copyout</tt> and <tt
-class="LITERAL">i586_copyin</tt> code for some reason. To disable this, boot the
-installation boot floppy and when it comes to the very first menu (the choice to drop
-into kernel UserConfig mode or not) choose the command-line interface (``expert mode'')
-version and type the following at it:</p>
-
-<pre class="SCREEN">
-<kbd class="USERINPUT">flags npx0 1</kbd>
-</pre>
-
-<p>Then proceed normally to boot. This will be saved into your kernel, so you only need
-to do it once.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.12." name="Q4.2.12."></a><b>4.2.12.</b> I have this CMD640 IDE controller
-that is said to be broken.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>FreeBSD does not support this controller.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.13." name="Q4.2.13."></a><b>4.2.13.</b> On a Compaq Aero notebook, I get
-the message ``No floppy devices found! Please check ...'' when trying to install from
-floppy.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>With Compaq being always a little different from other systems, they do not
-announce their floppy drive in the CMOS RAM of an Aero notebook. Therefore, the floppy
-disk driver assumes there is no drive configured. Go to the UserConfig screen, and set
-the Flags value of the fdc0 device to 0x1. This pretends the existence of the first
-floppy drive (as a 1.44 MB drive) to the driver without asking the CMOS at all.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.14." name="Q4.2.14."></a><b>4.2.14.</b> When installing on a Dell
-Poweredge XE, Dell proprietary RAID controller DSA (Dell SCSI Array) isn't
-recognized.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>Configure the DSA to use AHA-1540 emulation using EISA configuration utility.
-After that FreeBSD detects the DSA as an Adaptec AHA-1540 SCSI controller, with irq 11
-and port 340. Under emulation mode system will use DSA RAID disks, but you cannot use
-DSA-specific features such as watching RAID health.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.15." name="Q4.2.15."></a><b>4.2.15.</b> I have an IBM EtherJet PCI card,
-it is detected by the <span class="CITEREFENTRY"><span
-class="REFENTRYTITLE">fxp</span>(4)</span> driver correctly, but the lights on the card
-don't come on and it doesn't connect to the network.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>We don't understand why this happens. Neither do IBM (we asked them). The card
-is a standard Intel EtherExpress Pro/100 with an IBM label on it, and these cards
-normally work just fine. You may see these symptoms only in some IBM Netfinity servers.
-The only solution is to install a different Ethernet adapter.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.16." name="Q4.2.16."></a><b>4.2.16.</b> When I configure the network
-during installation on an IBM Netfinity 3500, the system freezes.</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>There is a problem with the onboard Ethernet in the Netfinity 3500 which we
-have not been able to identify at this time. It may be related to the SMP features of the
-system being misconfigured. You will have to install another Ethernet adapter and avoid
-attempting to configure the onboard adapter at any time.</p>
-</div>
-</div>
-
-<div class="QANDAENTRY">
-<div class="QUESTION">
-<p><a id="Q4.2.17." name="Q4.2.17."></a><b>4.2.17.</b> When I install onto a drive
-managed by a Mylex PCI RAID controller, the system fails to boot (eg. with a <tt
-class="LITERAL">read error</tt> message).</p>
-</div>
-
-<div class="ANSWER">
-<p><b></b>There is a bug in the Mylex driver which results in it ignoring the ``8GB''
-geometry mode setting in the BIOS. Use the 2GB mode instead.</p>
-</div>
-</div>
-</div>
-</div>
-</div>
-</div>
-
-<hr />
-<p align="center"><small>This file, and other release-related documents, can be
-downloaded from <a href="ftp://ftp.FreeBSD.org/">ftp://ftp.FreeBSD.org/</a>.</small></p>
-
-<p align="center"><small>For questions about FreeBSD, read the <a
-href="http://www.FreeBSD.org/docs.html">documentation</a> before contacting &#60;<a
-href="mailto:questions@FreeBSD.org">questions@FreeBSD.org</a>&#62;.</small></p>
-
-<p align="center"><small>For questions about this documentation, e-mail &#60;<a
-href="mailto:doc@FreeBSD.org">doc@FreeBSD.org</a>&#62;.</small></p>
-</body>
-</html>
-