From 70234e3b365379f91c4ff0d498a4795ff4c24484 Mon Sep 17 00:00:00 2001 From: John Baldwin Date: Wed, 17 Feb 2021 12:59:31 -0800 Subject: Drop sparc64, it is not supported in 13.0. Reviewed by: emaste, gjb Differential Revision: https://reviews.freebsd.org/D28721 --- website/content/en/releases/13.0R/hardware.adoc | 85 ------------------------- 1 file changed, 85 deletions(-) diff --git a/website/content/en/releases/13.0R/hardware.adoc b/website/content/en/releases/13.0R/hardware.adoc index 8ef212ddb8..c8a0335eaa 100644 --- a/website/content/en/releases/13.0R/hardware.adoc +++ b/website/content/en/releases/13.0R/hardware.adoc @@ -87,91 +87,6 @@ All Apple PowerPC machines with built-in USB are supported, as well as limited s SMP is supported on all systems with more than 1 processor. -[[proc-sparc64]] -=== sparc64 - -This section describes the systems currently known to be supported by FreeBSD on the Fujitsu SPARC64(R) and Sun UltraSPARC(R) platforms. - -SMP is supported on all systems with more than 1 processor. - -When using the `GENERIC` kernel, FreeBSD/sparc64 systems not equipped with a framebuffer supported by the {{< manpage "creator" "4">}} (Sun Creator, Sun Creator3D and Sun Elite3D) or {{< manpage "fetch" "4">}} (Sun PGX and Sun PGX64 as well as the ATI Mach64 chips found onboard in for example Sun Blade(TM) 100, Sun Blade(TM) 150, Sun Ultra(TM) 5 and Sun Ultra(TM) 10) driver must use the serial console. - -If you have a system that is not listed here, it may not have been tested with FreeBSD {releaseCurrent}. We encourage you to try it and send a note to the A.SPARC with your results, including which devices work and which do not. - -The following systems are fully supported by FreeBSD: - -* Naturetech GENIALstation 777S -* Sun Blade(TM) 100 -* Sun Blade(TM) 150 -* Sun Enterprise(TM) 150 -* Sun Enterprise(TM) 220R -* Sun Enterprise(TM) 250 -* Sun Enterprise(TM) 420R -* Sun Enterprise(TM) 450 -* Sun Fire(TM) B100s (support for the on-board NICs first appeared in 8.1-RELEASE) -* Sun Fire(TM) V100 -* Sun Fire(TM) V120 -* Sun Netra(TM) t1 100/105 -* Sun Netra(TM) T1 AC200/DC200 -* Sun Netra(TM) t 1100 -* Sun Netra(TM) t 1120 -* Sun Netra(TM) t 1125 -* Sun Netra(TM) t 1400/1405 -* Sun Netra(TM) 120 -* Sun Netra(TM) X1 -* Sun SPARCEngine(R) Ultra AX1105 -* Sun SPARCEngine(R) Ultra AXe -* Sun SPARCEngine(R) Ultra AXi -* Sun SPARCEngine(R) Ultra AXmp -* Sun SPARCEngine(R) CP1500 -* Sun Ultra(TM) 1 -* Sun Ultra(TM) 1E -* Sun Ultra(TM) 2 -* Sun Ultra(TM) 5 -* Sun Ultra(TM) 10 -* Sun Ultra(TM) 30 -* Sun Ultra(TM) 60 -* Sun Ultra(TM) 80 -* Sun Ultra(TM) 450 - -The following systems are partially supported by FreeBSD. In particular the fiber channel controllers in SBus-based systems are not supported. However, it is possible to use these with a SCSI controller supported by the {{< manpage "esp" "4">}} driver (Sun ESP SCSI, Sun FAS Fast-SCSI and Sun FAS366 Fast-Wide SCSI controllers). - -* Sun Enterprise(TM) 3500 -* Sun Enterprise(TM) 4500 - -Starting with 7.2-RELEASE, sparc64 systems based on Sun UltraSPARC(R) III and beyond are also supported by FreeBSD, which includes the following known working systems: - -* Sun Blade(TM) 1000 -* Sun Blade(TM) 1500 -* Sun Blade(TM) 2000 -* Sun Blade(TM) 2500 -* Sun Fire(TM) 280R -* Sun Fire(TM) V210 -* Sun Fire(TM) V215 (support first appeared in 7.3-RELEASE and 8.1-RELEASE) -* Sun Fire(TM) V240 -* Sun Fire(TM) V245 (support first appeared in 7.3-RELEASE and 8.1-RELEASE) -* Sun Fire(TM) V250 -* Sun Fire(TM) V440 (support for the on-board NICs first appeared in 7.3-RELEASE and 8.0-RELEASE) -* Sun Fire(TM) V480 (501-6780 and 501-6790 centerplanes only, for which support first appeared in 7.3-RELEASE and 8.1-RELEASE, other centerplanes might work beginning with 8.3-RELEASE and 9.0-RELEASE) -* Sun Fire(TM) V880 -* Sun Fire(TM) V890 (support first appeared in 7.4-RELEASE and 8.1-RELEASE, non-mixed UltraSPARC(R) IV/IV+ CPU-configurations only) -* Netra(TM) 20/Netra(TM) T4 - -The following Sun UltraSPARC(R) systems are not tested but believed to be also supported by FreeBSD: - -* Sun Fire(TM) V125 -* Sun Fire(TM) V490 (support first appeared in 7.4-RELEASE and 8.1-RELEASE, non-mixed UltraSPARC(R) IV/IV+ CPU-configurations only) - -Starting with 7.4-RELEASE and 8.1-RELEASE, sparc64 systems based on Fujitsu SPARC64(R) V are also supported by FreeBSD, which includes the following known working systems: - -* Fujitsu PRIMEPOWER(R) 250 - -The following Fujitsu PRIMEPOWER(R) systems are not tested but believed to be also supported by FreeBSD: - -* Fujitsu PRIMEPOWER(R) 450 -* Fujitsu PRIMEPOWER(R) 650 -* Fujitsu PRIMEPOWER(R) 850 - //// The "Supported Devices" section of the release notes. -- cgit v1.2.3