AndreyChernovContributed by Michael C.WuRewritten by &os; is a distributed project with users and contributors located all over the world. As such, &os; supports localization into many languages, allowing users to view, input, or process data in non-English languages. One can choose from most of the major languages, including, but not limited to: Chinese, German, Japanese, Korean, French, Russian, and Vietnamese. internationalization localization localization The term internationalization has been shortened to i18n, which represents the number of letters between the first and the last letters of internationalization. L10n uses the same naming scheme, but from localization. The i18n/L10n methods, protocols, and applications allow users to use languages of their choice. This chapter discusses the internationalization and localization features of &os;. After reading this chapter, you will know: How locale names are constructed. How to set the locale for a login shell. How to configure the console for non-English languages. How to configure Xorg for different languages. How to find i18n-compliant applications. Where to find more information for configuring specific languages. Before reading this chapter, you should: Know how to install additional third-party applications. locale Localization settings are based on three components: the language code, country code, and encoding. Locale names are constructed from these parts as follows: LanguageCode_CountryCode.Encoding language codes country codes The LanguageCode and CountryCode are used to determine the country and the specific language variation. provides some examples of LanguageCode_CountryCode: LanguageCode_Country Code Description en_US English, United States ru_RU Russian, Russia zh_TW Traditional Chinese, Taiwan A complete listing of available locales can be found by typing: &prompt.user; locale -a | more To determine the current locale setting: &prompt.user; locale encodings ASCII Language specific character sets, such as ISO8859-1, ISO8859-15, KOI8-R, and CP437, are described in &man.multibyte.3;. The active list of character sets can be found at the IANA Registry. Some languages, such as Chinese or Japanese, cannot be represented using ASCII characters and require an extended language encoding using either wide or multibyte characters. Examples of wide or multibyte encodings include EUC and Big5. Older applications may mistake these encodings for control characters while newer applications usually recognize these characters. Depending on the implementation, users may be required to compile an application with wide or multibyte character support, or to configure it correctly. &os; uses Xorg-compatible locale encodings. The rest of this section describes the various methods for configuring the locale on a &os; system. The next section will discuss the considerations for finding and compiling applications with i18n support. Locale settings are configured either in a user's ~/.login_conf or in the startup file of the user's shell: ~/.profile, ~/.bashrc, or ~/.cshrc. Two environment variables should be set: LANG, which sets the locale POSIX MIME MM_CHARSET, which sets the MIME character set used by applications In addition to the user's shell configuration, these variables should also be set for specific application configuration and Xorg configuration. locale login class Two methods are available for making the needed variable assignments: the login class method, which is the recommended method, and the startup file method. The next two sections demonstrate how to use both methods. This first method is the recommended method as it assigns the required environment variables for locale name and MIME character sets for every possible shell. This setup can either be performed by each user or it can be configured for all users by the superuser. This minimal example sets both variables for Latin-1 encoding in the .login_conf of an individual user's home directory: me:\ :charset=ISO-8859-1:\ :lang=de_DE.ISO8859-1: Traditional Chinese BIG-5 encoding Here is an example of a user's ~/.login_conf that sets the variables for Traditional Chinese in BIG-5 encoding. More variables are needed because some applications do not correctly respect locale variables for Chinese, Japanese, and Korean: #Users who do not wish to use monetary units or time formats #of Taiwan can manually change each variable me:\ :lang=zh_TW.Big5:\ :setenv=LC_ALL=zh_TW.Big5:\ :setenv=LC_COLLATE=zh_TW.Big5:\ :setenv=LC_CTYPE=zh_TW.Big5:\ :setenv=LC_MESSAGES=zh_TW.Big5:\ :setenv=LC_MONETARY=zh_TW.Big5:\ :setenv=LC_NUMERIC=zh_TW.Big5:\ :setenv=LC_TIME=zh_TW.Big5:\ :charset=big5:\ :xmodifiers="@im=gcin": #Set gcin as the XIM Input Server Alternately, the superuser can configure all users of the system for localization. The following variables in /etc/login.conf are used to set the locale and MIME character set: language_name|Account Type Description:\ :charset=MIME_charset:\ :lang=locale_name:\ :tc=default: So, the previous Latin-1 example would look like this: german|German Users Accounts:\ :charset=ISO-8859-1:\ :lang=de_DE.ISO8859-1:\ :tc=default: See &man.login.conf.5; for more details about these variables. Whenever /etc/login.conf is edited, remember to execute the following command to update the capability database: &prompt.root; cap_mkdb /etc/login.conf vipw In addition to manually editing /etc/login.conf, several utilities are available for setting the locale for newly created users. When using vipw to add new users, specify the language to set the locale: user:password:1111:11:language:0:0:User Name:/home/user:/bin/sh adduser login class When using adduser to add new users, the default language can be pre-configured for all new users or specified for an individual user. If all new users use the same language, set defaultclass = language in /etc/adduser.conf. To override this setting when creating a user, either input the required locale at this prompt: Enter login class: default []: or specify the locale to set when invoking adduser: &prompt.root; adduser -class language pw If pw is used to add new users, specify the locale as follows: &prompt.root; pw useradd user_name -L language This second method is not recommended as each shell that is used requires manual configuration, where each shell has a different configuration file and differing syntax. As an example, to set the German language for the sh shell, these lines could be added to ~/.profile to set the shell for that user only. These lines could also be added to /etc/profile or /usr/share/skel/dot.profile to set that shell for all users: LANG=de_DE.ISO8859-1; export LANG MM_CHARSET=ISO-8859-1; export MM_CHARSET However, the name of the configuration file and the syntax used differs for the csh shell. These are the equivalent settings for ~/.csh.login, /etc/csh.login, or /usr/share/skel/dot.login: setenv LANG de_DE.ISO8859-1 setenv MM_CHARSET ISO-8859-1 To complicate matters, the syntax needed to configure Xorg in ~/.xinitrc also depends upon the shell. The first example is for the sh shell and the second is for the csh shell: LANG=de_DE.ISO8859-1; export LANG setenv LANG de_DE.ISO8859-1 Several localized fonts are available for the console. To see a listing of available fonts, type ls /usr/share/syscons/fonts. To configure the console font, specify the font_name, without the .fnt suffix, in /etc/rc.conf: font8x16=font_name font8x14=font_name font8x8=font_name keymap screenmap The keymap and screenmap can be set by adding the following to /etc/rc.conf: scrnmap=screenmap_name keymap=keymap_name keychange="fkey_number sequence" To see the list of available screenmaps, type ls /usr/share/syscons/scrnmaps. Do not include the .scm suffix when specifying screenmap_name. A screenmap with a corresponding mapped font is usually needed as a workaround for expanding bit 8 to bit 9 on a VGA adapter's font character matrix so that letters are moved out of the pseudographics area if the screen font uses a bit 8 column. To see the list of available keymaps, type ls /usr/share/syscons/keymaps. When specifying the keymap_name, do not include the .kbd suffix. To test keymaps without rebooting, use &man.kbdmap.1;. The keychange entry is usually needed to program function keys to match the selected terminal type because function key sequences cannot be defined in the keymap. Next, set the correct console terminal type in /etc/ttys for all virtual terminal entries. summarizes the available terminal types.: Character Set Terminal Type ISO8859-1 or ISO8859-15 cons25l1 ISO8859-2 cons25l2 ISO8859-7 cons25l7 KOI8-R cons25r KOI8-U cons25u CP437 (VGA default) cons25 US-ASCII cons25w moused For languages with wide or multibyte characters, install a console for that language from the &os; Ports Collection. The available ports are summarized in . Once installed, refer to the port's pkg-message or man pages for configuration and usage instructions. Language Port Location Traditional Chinese (BIG-5) chinese/big5con Chinese/Japanese/Korean chinese/cce Chinese/Japanese/Korean chinese/zhcon Japanese chinese/kon2 Japanese japanese/kon2-14dot Japanese japanese/kon2-16dot If moused is enabled in /etc/rc.conf, additional configuration may be required. By default, the mouse cursor of the &man.syscons.4; driver occupies the 0xd0-0xd3 range in the character set. If the language uses this range, move the cursor's range by adding the following line to /etc/rc.conf: mousechar_start=3 describes how to install and configure Xorg. When configuring Xorg for localization, additional fonts and input methods are available from the &os; Ports Collection. Application specific i18n settings such as fonts and menus can be tuned in ~/.Xresources and should allow users to view their selected language in graphical application menus. X Input Method (XIM) The X Input Method (XIM) protocol is an Xorg standard for inputting non-English characters. summarizes the input method applications which are available in the &os; Ports Collection. Additional Fcitx and Uim applications are also available. Language Input Method Chinese chinese/gcin Chinese chinese/ibus-chewing Chinese chinese/ibus-pinyin Chinese chinese/oxim Chinese chinese/scim-fcitx Chinese chinese/scim-pinyin Chinese chinese/scim-tables Japanese japanese/ibus-anthy Japanese japanese/ibus-mozc Japanese japanese/ibus-skk Japanese japanese/im-ja Japanese japanese/kinput2 Japanese japanese/scim-anthy Japanese japanese/scim-canna Japanese japanese/scim-honoka Japanese japanese/scim-honoka-plugin-romkan Japanese japanese/scim-honoka-plugin-wnn Japanese japanese/scim-prime Japanese japanese/scim-skk Japanese japanese/scim-tables Japanese japanese/scim-tomoe Japanese japanese/scim-uim Japanese japanese/skkinput Japanese japanese/skkinput3 Japanese japanese/uim-anthy Korean korean/ibus-hangul Korean korean/imhangul Korean korean/nabi Korean korean/scim-hangul Korean korean/scim-tables Vietnamese vietnamese/xvnkb Vietnamese vietnamese/x-unikey i18n applications are programmed using i18n kits under libraries. These allow developers to write a simple file and translate displayed menus and texts to each language. The &os; Ports Collection contains many applications with built-in support for wide or multibyte characters for several languages. Such applications include i18n in their names for easy identification. However, they do not always support the language needed. Some applications can be compiled with the specific charset. This is usually done in the port's Makefile or by passing a value to configure. Refer to the i18n documentation in the respective &os; port's source for more information on how to determine the needed configure value or the port's Makefile to determine which compile options to use when building the port. This section provides configuration examples for localizing a &os; system for the Russian language. It then provides some additional resources for localizing other languages. AndreyChernovOriginally contributed by localization Russian This section shows the specific settings needed to localize a &os; system for the Russian language. Refer to Using Localization for a more complete description of each type of setting. To set this locale for the login shell, add the following lines to each user's ~/.login_conf: me:My Account:\ :charset=KOI8-R:\ :lang=ru_RU.KOI8-R: To configure the console, add the following lines to /etc/rc.conf: keymap="ru.koi8-r" scrnmap="koi8-r2cp866" font8x16="cp866b-8x16" font8x14="cp866-8x14" font8x8="cp866-8x8" mousechar_start=3 For each ttyv entry in /etc/ttys, use cons25r as the terminal type. printers To configure printing, a special output filter is needed to convert from KOI8-R to CP866 since most printers with Russian characters come with hardware code page CP866. &os; includes a default filter for this purpose, /usr/libexec/lpr/ru/koi2alt. To use this filter, add this entry to /etc/printcap: lp|Russian local line printer:\ :sh:of=/usr/libexec/lpr/ru/koi2alt:\ :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: Refer to &man.printcap.5; for a more detailed explanation. To configure support for Russian filenames in mounted &ms-dos; file systems, include -L and the locale name when adding an entry to /etc/fstab: /dev/ad0s2 /dos/c msdos rw,-Lru_RU.KOI8-R 0 0 Refer to &man.mount.msdosfs.8; for more details. To configure Russian fonts for &xorg;, install the x11-fonts/xorg-fonts-cyrillic package. Then, check the "Files" section in /etc/X11/xorg.conf. The following line must be added before any other FontPath entries: FontPath "/usr/local/lib/X11/fonts/cyrillic" Additional Cyrillic fonts are available in the Ports Collection. To activate a Russian keyboard, add the following to the "Keyboard" section of /etc/xorg.conf: Option "XkbLayout" "us,ru" Option "XkbOptions" "grp:toggle" Make sure that XkbDisable is commented out in that file. For grp:toggle use Right Alt, for grp:ctrl_shift_toggle use CtrlShift. For grp:caps_toggle use CapsLock. The old CapsLock function is still available in LAT mode only using ShiftCapsLock. grp:caps_toggle does not work in &xorg; for some unknown reason. If the keyboard has &windows; keys, and some non-alphabetical keys are mapped incorrectly, add the following line to /etc/xorg.conf: Option "XkbVariant" ",winkeys" The Russian XKB keyboard may not work with non-localized applications. Minimally localized applications should call a XtSetLanguageProc (NULL, NULL, NULL); function early in the program. See http://koi8.pp.ru/xwin.html for more instructions on localizing Xorg applications. For more general information about KOI8-R encoding, refer to http://koi8.pp.ru/. This section lists some additional resources for configuring other locales. localization Traditional Chinese localization German localization Greek localization Japanese localization Korean Traditional Chinese for Taiwan The &os;-Taiwan Project has a Chinese HOWTO for &os; at http://netlab.cse.yzu.edu.tw/~statue/freebsd/zh-tut/. German Language Localization for All ISO 8859-1 Languages A tutorial on using umlauts on &os; is available in German at http://user.cs.tu-berlin.de/~eserte/FreeBSD/doc/umlaute/umlaute.html. Greek Language Localization A complete article on Greek support in &os; is available here, in Greek only, as part of the official &os; Greek documentation. Japanese and Korean Language Localization For Japanese, refer to http://www.jp.FreeBSD.org/, and for Korean, refer to http://www.kr.FreeBSD.org/. Non-English &os; Documentation Some &os; contributors have translated parts of the &os; documentation to other languages. They are available through links on the &os; web site or in /usr/share/doc.