diff options
Diffstat (limited to 'Mk/bsd.port.mk')
| -rw-r--r-- | Mk/bsd.port.mk | 3400 |
1 files changed, 1761 insertions, 1639 deletions
diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk index ba8e97da8f9c..8e13aa4f9b24 100644 --- a/Mk/bsd.port.mk +++ b/Mk/bsd.port.mk @@ -40,9 +40,9 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # makefile is being used on. Automatically set to # "FreeBSD," "NetBSD," or "OpenBSD" as appropriate. # OSREL - The release version of the operating system as a text -# string (e.g., "12.2"). +# string (e.g., "12.4"). # OSVERSION - The operating system version as a comparable integer; -# the value of __FreeBSD_version (e.g., 1202000). +# the value of __FreeBSD_version (e.g., 1302000). # # This is the beginning of the list of all variables that need to be # defined in a port, listed in order that they should be included @@ -63,7 +63,7 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # In this case, incrementing PORTEPOCH forces the revision. # Default: 0 (no effect). # PKGNAME - Always defined as -# ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}. +# ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PKGVERSION}. # Do not define this in your Makefile. # PKGNAMEPREFIX - Prefix to specify that port is language-specific, etc. # Optional. @@ -71,7 +71,7 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # designator (in case there are different versions of # one port as is the case for Tcl). # Optional. -# PKGVERSION - Always defined as ${PORTVERSION}. +# PKGVERSION - Version of package. # Do not define this in your Makefile. # DISTVERSION - Vendor version of the distribution. # Default: ${PORTVERSION} @@ -123,9 +123,13 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # # (NOTE: by convention, the MAINTAINER entry (see above) should go here.) # -# These variables are typically set in /etc/make.conf to indicate -# the user's preferred location to fetch files from. You should -# rarely need to set these. +# COMMENT - A short description of the package (less than 70 characters) +# WWW - URL users can get more information on the provided package +# was previously part of pkg-descr +# +# The following variables are typically set in /etc/make.conf to indicate +# the user's preferred location to fetch files from. You should rarely +# need to set these. # # MASTER_SITE_BACKUP # - Backup location(s) for distribution files and patch @@ -151,8 +155,6 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # but distfiles can be put on ftp sites and CDROMs. # FORBIDDEN - Package build should not be attempted because of # security vulnerabilities. -# LEGAL_TEXT - Port has legal issues (e.g., special permission to distribute, lacks a license). -# LEGAL_PACKAGE - Port has no legal issues but defines NO_PACKAGE # IGNORE - Package build should be skipped entirely (e.g. # because of serious unfixable problems in the build, # because it cannot be manually fetched, etc). Error @@ -325,17 +327,6 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # usage inside the ports framework, and the latter are reserved for user- # settable options. (Setting USE_* in /etc/make.conf is always wrong). # -# WITH_DEBUG - If set, debugging flags are added to CFLAGS and the -# binaries don't get stripped by INSTALL_PROGRAM or -# INSTALL_LIB. Besides, individual ports might -# add their specific to produce binaries for debugging -# purposes. You can override the debug flags that are -# passed to the compiler by setting DEBUG_FLAGS. It is -# set to "-g" at default. -# -# NOTE: to override a globally defined WITH_DEBUG at a -# later time ".undef WITH_DEBUG" can be used -# # WITH_DEBUG_PORTS - A list of origins for which WITH_DEBUG will be set # # WITHOUT_SSP - Disable SSP. @@ -346,6 +337,11 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # can be used in Makefiles by port maintainers # if a port breaks with it (it should be # extremely rare). +# PIE_CFLAGS - Defaults to -fPIE -fPIC. This value +# is added to CFLAGS and the necessary flags +# are added to LDFLAGS. Note that PIE_UNSAFE +# can be used in Makefiles by port maintainers +# if a port breaks with it. ## # USE_LOCALE - LANG and LC_ALL are set to the value of this variable in # CONFIGURE_ENV and MAKE_ENV. Example: USE_LOCALE=en_US.UTF-8 @@ -373,9 +369,6 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # USE_OCAML - If set, this port relies on the OCaml language. # Implies inclusion of bsd.ocaml.mk. (Also see # that file for more information on USE_OCAML*). -# USE_RUBY - If set, this port relies on the Ruby language. -# Implies inclusion of bsd.ruby.mk. (Also see -# that file for more information on USE_RUBY_*). ## # USE_GECKO - If set, this port uses the Gecko/Mozilla product. # See bsd.gecko.mk for more details. @@ -506,13 +499,6 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # Installs all directories and files from ${WRKSRC}/doc # to ${DOCSDIR} except sed(1) backup files. # -# MANPREFIX - The directory prefix for manual pages. -# Default: ${PREFIX} -# MAN<sect>PREFIX -# - If manual pages of some sections install in different -# locations than others, use these. -# Default: ${MANPREFIX} -# # Set the following to specify all .info files your port installs. # # INFO - A list of .info files (omitting the trailing ".info"); @@ -572,10 +558,15 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # fetch-url-list # - Show list of URLS to retrieve missing ${DISTFILES} and # ${PATCHFILES} for this port. +# fetch-url-recursive-list +# - Show list of URLS to retrieve missing ${DISTFILES} and +# ${PATCHFILES} for this port and dependencies. # fetch-urlall-list # - Show list of URLS to retrieve ${DISTFILES} and # ${PATCHFILES} for this port. -# +# fetch-urlall-recursive-list +# - Show list of URLS to retrieve ${DISTFILES} and +# ${PATCHFILES} for this port and dependencies. # all-depends-list # - Show all directories which are dependencies # for this port. @@ -600,8 +591,8 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # - Show all directories which are test-dependencies # for this port. # install-missing-packages -# - Install missing dependencies from package and mark -# them as automatically installed. +# - Install missing dependencies from package and mark +# them as automatically installed. # extract - Unpacks ${DISTFILES} into ${WRKDIR}. # patch - Apply any provided patches to the source. # configure - Runs either GNU configure, one or more local configure @@ -618,9 +609,10 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # - Create a package for a port and _all_ of its dependencies. # describe - Try to generate a one-line description for each port for # use in INDEX files and the like. -# check-plist - Checks for files missing from the plist, and files in the plist -# that are not installed by the port. -# check-sanity - Perform some basic checks of the port layout. +# describe-json - Generate a JSON-compliant representation of each port. +# check-plist - Checks for files missing from the plist, and files in the +# plist that are not installed by the port. +# check-sanity - Perform some basic checks of the port layout. # checkpatch - Do a "patch -C" instead of a "patch". Note that it may # give incorrect results if multiple patches deal with # the same file. @@ -675,6 +667,10 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # # For options see bsd.options.mk # +# WRK_ENV - Environment used when running the upstream build system. +# Target-specific environment variables can be defined using +# CONFIGURE_ENV, MAKE_ENV, TEST_ENV, and similar variables. +# # For fetch: # # FETCH_BINARY - Path to ftp/http fetch command if not in $PATH. @@ -755,7 +751,7 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # - Pass these args to configure if ${HAS_CONFIGURE} is set. # Default: "--prefix=${GNU_CONFIGURE_PREFIX} # --infodir=${PREFIX}/${INFO_PATH} --localstatedir=/var -# --mandir=${MANPREFIX}/man --build=${CONFIGURE_TARGET}" if +# --mandir=${PREFIX}/share/man --build=${CONFIGURE_TARGET}" if # GNU_CONFIGURE is set, "CC=${CC} CFLAGS=${CFLAGS} # PREFIX=${PREFIX} INSTALLPRIVLIB=${PREFIX}/lib # INSTALLARCHLIB=${PREFIX}/lib" if USES=perl5 and @@ -857,7 +853,7 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # described below except that any line beginning with @comment # is deleted. # SUB_LIST - List of "variable=value" pair for substitution in ${SUB_FILES} -# Some pairs are added by default: eg. PREFIX=${PREFIX} +# Some pairs are added by default: e.g. PREFIX=${PREFIX} # # USE_LDCONFIG - If set to "yes", this adds ${PREFIX}/lib to the list of # directories to be searched for shared libraries. @@ -903,7 +899,7 @@ FreeBSD_MAINTAINER= portmgr@FreeBSD.org # "Name" "Comment" "Icon" "Exec" "Categories" StartupNotify # Rules: # * Only add desktop entries for applications which do not -# require a terminal (ie. X applications). +# require a terminal (i.e. X11 applications). # * If the upstream distribution already installs .desktop # files, you do not need to use this. # * If you require a more elaborate .desktop file than this @@ -1019,6 +1015,8 @@ LC_ALL= C # These need to be absolute since we don't know how deep in the ports # tree we are and thus can't go relative. They can, of course, be overridden # by individual Makefiles or local system make configuration. +_LIST_OF_WITH_FEATURES= bind_now debug debuginfo lto pie relro sanitize ssp testing +_DEFAULT_WITH_FEATURES= ssp PORTSDIR?= /usr/ports LOCALBASE?= /usr/local LINUXBASE?= /compat/linux @@ -1047,16 +1045,22 @@ _FLAVOR:= ${FLAVOR} .if !defined(PORTS_FEATURES) && empty(${PORTS_FEATURES:MFLAVORS}) PORTS_FEATURES+= FLAVORS .endif -MINIMAL_PKG_VERSION= 1.15.9 +MINIMAL_PKG_VERSION= 1.17.2 _PORTS_DIRECTORIES+= ${PKG_DBDIR} ${PREFIX} ${WRKDIR} ${EXTRACT_WRKDIR} \ - ${STAGEDIR}${PREFIX} ${WRKDIR}/pkg ${BINARY_LINKDIR} + ${STAGEDIR}${PREFIX} ${WRKDIR}/pkg ${BINARY_LINKDIR} \ + ${PKGCONFIG_LINKDIR} # Ensure .CURDIR contains an absolute path without a trailing slash. Failed # builds can occur when PORTSDIR is a symbolic link, or with something like # make -C /usr/ports/category/port/. .CURDIR:= ${.CURDIR:tA} +# Ensure .CURDIR doesn't contain a colon, which breaks makefile targets +.if ${.CURDIR:S/:/\:/g} != ${.CURDIR} +.error The current directory path contains ':', this is not supported +.endif + # make sure bmake treats -V as expected .MAKE.EXPAND_VARIABLES= yes @@ -1066,27 +1070,27 @@ _PORTS_DIRECTORIES+= ${PKG_DBDIR} ${PREFIX} ${WRKDIR} ${EXTRACT_WRKDIR} \ .MAKEOVERRIDES:= ${.MAKEOVERRIDES:NFLAVOR} .if defined(CROSS_TOOLCHAIN) -.if !defined(CROSS_SYSROOT) +. if !defined(CROSS_SYSROOT) IGNORE= CROSS_SYSROOT should be defined -.endif +. endif .include "${LOCALBASE}/share/toolchains/${CROSS_TOOLCHAIN}.mk" # Do not define CPP on purpose -.if !defined(HOSTCC) +. if !defined(HOSTCC) HOSTCC:= ${CC} HOSTCXX:= ${CXX} -.endif -.if !defined(CC_FOR_BUILD) +. endif +. if !defined(CC_FOR_BUILD) CC_FOR_BUILD:= ${HOSTCC} CXX_FOR_BUILD:= ${HOSTCXX} -.endif +. endif CONFIGURE_ENV+= HOSTCC="${HOSTCC}" HOSTCXX="${HOSTCXX}" CC_FOR_BUILD="${CC_FOR_BUILD}" CXX_FOR_BUILD="${CXX_FOR_BUILD}" CC= ${XCC} --sysroot=${CROSS_SYSROOT} CXX= ${XCXX} --sysroot=${CROSS_SYSROOT} CPP= ${XCPP} --sysroot=${CROSS_SYSROOT} -.for _tool in AS AR LD NM OBJCOPY RANLIB SIZE STRINGS +. for _tool in AS AR LD NM OBJCOPY RANLIB SIZE STRINGS ${_tool}= ${CROSS_BINUTILS_PREFIX}${_tool:tl} -.endfor +. endfor LD+= --sysroot=${CROSS_SYSROOT} STRIP_CMD= ${CROSS_BINUTILS_PREFIX}strip # only bmake support the below @@ -1105,60 +1109,58 @@ STRIPBIN= ${STRIP_CMD} .else -.if !target(makepatch) +. if !target(makepatch) makepatch: @${SETENV} WRKDIR=${WRKDIR} PATCHDIR=${PATCHDIR} \ PATCH_WRKSRC=${PATCH_WRKSRC} \ STRIP_COMPONENTS="${PATCH_STRIP:S/-p//}" \ ${SH} ${SCRIPTSDIR}/smart_makepatch.sh -.endif - +. endif # Start of options section -.if defined(INOPTIONSMK) || ( !defined(USEOPTIONSMK) && !defined(AFTERPORTMK) ) - +. if defined(INOPTIONSMK) || ( !defined(USEOPTIONSMK) && !defined(AFTERPORTMK) ) # Get the default maintainer MAINTAINER?= ports@FreeBSD.org # Get the architecture -.if !defined(ARCH) +. if !defined(ARCH) ARCH!= ${UNAME} -p -.endif +. endif HOSTARCH:= ${ARCH} -.if defined(CROSS_TOOLCHAIN) +. if defined(CROSS_TOOLCHAIN) ARCH= ${CROSS_TOOLCHAIN:C,-.*$,,} -.endif +. endif _EXPORTED_VARS+= ARCH -.if ${ARCH} == powerpc64 -. if !defined(PPC_ABI) +. if ${ARCH} == powerpc64 +. if !defined(PPC_ABI) PPC_ABI!= ${CC} -dM -E - < /dev/null | ${AWK} '/_CALL_ELF/{print "ELFv"$$3}' -. if ${PPC_ABI} != ELFv2 +. if ${PPC_ABI} != ELFv2 PPC_ABI= ELFv1 -. endif -. endif +. endif +. endif _EXPORTED_VARS+= PPC_ABI -.endif +. endif # Get operating system versions for a cross build -.if defined(CROSS_SYSROOT) -.if !exists(${CROSS_SYSROOT}/usr/include/sys/param.h) +. if defined(CROSS_SYSROOT) +. if !exists(${CROSS_SYSROOT}/usr/include/sys/param.h) .error CROSS_SYSROOT does not include /usr/include/sys/param.h. -.endif +. endif OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < ${CROSS_SYSROOT}/usr/include/sys/param.h _OSRELEASE!= ${AWK} -v version=${OSVERSION} 'END { printf("%d.%d-CROSS", version / 100000, version / 1000 % 100) }' < /dev/null -.endif +. endif # Get the operating system type -.if !defined(OPSYS) +. if !defined(OPSYS) OPSYS!= ${UNAME} -s -.endif +. endif _EXPORTED_VARS+= OPSYS -.if !defined(_OSRELEASE) +. if !defined(_OSRELEASE) _OSRELEASE!= ${UNAME} -r -.endif +. endif _EXPORTED_VARS+= _OSRELEASE # Get the operating system revision @@ -1166,24 +1168,23 @@ OSREL?= ${_OSRELEASE:C/-.*//} _EXPORTED_VARS+= OSREL # Get __FreeBSD_version -.if !defined(OSVERSION) -.if exists(/usr/include/sys/param.h) +. if !defined(OSVERSION) +. if exists(/usr/include/sys/param.h) OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h -.elif exists(${SRC_BASE}/sys/sys/param.h) +. elif exists(${SRC_BASE}/sys/sys/param.h) OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < ${SRC_BASE}/sys/sys/param.h -.else +. else .error Unable to determine OS version. Either define OSVERSION, install /usr/include/sys/param.h or define SRC_BASE. -.endif -.endif +. endif +. endif _EXPORTED_VARS+= OSVERSION -.if (${OPSYS} == FreeBSD && ${OSVERSION} < 1202000) || \ - (${OPSYS} == DragonFly && ${DFLYVERSION} < 400400) +. if ${OPSYS} == FreeBSD && (${OSVERSION} < 1302000 ) _UNSUPPORTED_SYSTEM_MESSAGE= Ports Collection support for your ${OPSYS} version has ended, and no ports\ are guaranteed to build on this system. Please upgrade to a supported release. -. if defined(ALLOW_UNSUPPORTED_SYSTEM) +. if defined(ALLOW_UNSUPPORTED_SYSTEM) WARNING+= "${_UNSUPPORTED_SYSTEM_MESSAGE}" -. else +. else show-unsupported-system-error: @${ECHO_MSG} "/!\\ ERROR: /!\\" @${ECHO_MSG} @@ -1192,95 +1193,112 @@ show-unsupported-system-error: @${ECHO_MSG} "No support will be provided if you silence this message by defining ALLOW_UNSUPPORTED_SYSTEM." | ${FMT_80} @${ECHO_MSG} @${FALSE} -. endif -.endif +. endif +. endif # Convert OSVERSION to major release number _OSVERSION_MAJOR= ${OSVERSION:C/([0-9]?[0-9])([0-9][0-9])[0-9]{3}/\1/} # Sanity checks for chroot/jail building. # Skip if OSVERSION specified on cmdline for testing. Only works for bmake. -.if !defined(.MAKEOVERRIDES) || !${.MAKEOVERRIDES:MOSVERSION} -.if ${_OSVERSION_MAJOR} != ${_OSRELEASE:R} -.if !defined(I_DONT_CARE_IF_MY_BUILDS_TARGET_THE_WRONG_RELEASE) +. if !defined(.MAKEOVERRIDES) || !${.MAKEOVERRIDES:MOSVERSION} +. if ${_OSVERSION_MAJOR} != ${_OSRELEASE:R} +. if !defined(I_DONT_CARE_IF_MY_BUILDS_TARGET_THE_WRONG_RELEASE) .error UNAME_r (${_OSRELEASE}) and OSVERSION (${OSVERSION}) do not agree on major version number. -.endif -.elif ${_OSVERSION_MAJOR} != ${OSREL:R} +. endif +. elif ${_OSVERSION_MAJOR} != ${OSREL:R} .error OSREL (${OSREL}) and OSVERSION (${OSVERSION}) do not agree on major version number. -.endif -.endif +. endif +. endif # Only define tools here (for transition period with between pkg tools) .include "${PORTSDIR}/Mk/bsd.commands.mk" -.if !defined(_PKG_CHECKED) && !defined(PACKAGE_BUILDING) && exists(${PKG_BIN}) -.if !defined(_PKG_VERSION) +. if !defined(_PKG_CHECKED) && !defined(PACKAGE_BUILDING) && exists(${PKG_BIN}) +. if !defined(_PKG_VERSION) _PKG_VERSION!= ${PKG_BIN} -v -.endif +. endif # XXX hack for smooth transition towards pkg 1.17 _PKG_BEFORE_PKGEXT!= ${PKG_BIN} version -t ${_PKG_VERSION:C/-.*//g} 1.17.0 -.if ${_PKG_BEFORE_PKGEXT} == "<" +. if ${_PKG_BEFORE_PKGEXT} == "<" _PKG_TRANSITIONING_TO_NEW_EXT= yes _EXPORTED_VARS+= _PKG_TRANSITIONING_TO_NEW_EXT WARNING+= "It is strongly recommended to upgrade to a newer version of pkg first" -.endif +. endif # XXX End of hack _PKG_STATUS!= ${PKG_BIN} version -t ${_PKG_VERSION:C/-.*//g} ${MINIMAL_PKG_VERSION} -.if ${_PKG_STATUS} == "<" +. if ${_PKG_STATUS} == "<" IGNORE= pkg(8) must be version ${MINIMAL_PKG_VERSION} or greater, but you have ${_PKG_VERSION}. You must upgrade the ${PKG_ORIGIN} port first -.endif +. endif _PKG_CHECKED= 1 -.endif +. endif _EXPORTED_VARS+= _PKG_CHECKED MASTERDIR?= ${.CURDIR} -.if ${MASTERDIR} != ${.CURDIR} +. if ${MASTERDIR} != ${.CURDIR} SLAVE_PORT?= yes MASTER_PORT?=${MASTERDIR:C/[^\/]+\/\.\.\///:C/[^\/]+\/\.\.\///:C/^.*\/([^\/]+\/[^\/]+)$/\\1/} -.else +. else SLAVE_PORT?= no MASTER_PORT?= -.endif +. endif # If they exist, include Makefile.inc, then architecture/operating # system specific Makefiles, then local Makefile.local. -.if ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/../Makefile.inc) +. if ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/../Makefile.inc) .include "${.CURDIR}/../Makefile.inc" USE_SUBMAKE= yes -.endif +. endif -.if exists(${MASTERDIR}/../Makefile.inc) +. if exists(${MASTERDIR}/../Makefile.inc) .include "${MASTERDIR}/../Makefile.inc" USE_SUBMAKE= yes -.endif +. endif -.if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS}) +. if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS}) .include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}" USE_SUBMAKE= yes -.elif exists(${MASTERDIR}/Makefile.${OPSYS}) +. elif exists(${MASTERDIR}/Makefile.${OPSYS}) .include "${MASTERDIR}/Makefile.${OPSYS}" USE_SUBMAKE= yes -.elif exists(${MASTERDIR}/Makefile.${ARCH}) +. elif exists(${MASTERDIR}/Makefile.${ARCH}) .include "${MASTERDIR}/Makefile.${ARCH}" USE_SUBMAKE= yes -.endif +. endif -.if exists(${MASTERDIR}/Makefile.local) +. if exists(${MASTERDIR}/Makefile.local) .include "${MASTERDIR}/Makefile.local" USE_SUBMAKE= yes -.elif ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/Makefile.local) +. elif ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/Makefile.local) .include "${.CURDIR}/Makefile.local" USE_SUBMAKE= yes -.endif +. endif -.for _CATEGORY in ${CATEGORIES} +. for _CATEGORY in ${CATEGORIES} PKGCATEGORY?= ${_CATEGORY} -.endfor +. endfor _PORTDIRNAME= ${.CURDIR:T} PORTDIRNAME?= ${_PORTDIRNAME} PKGORIGIN?= ${PKGCATEGORY}/${PORTDIRNAME} +# Now that PKGORIGIN is set, look for origin-specific variables. +# These are typically set in a make.conf, in the form: +# +# category_portname_VARS= varname=value othervar+=value novar@ +# +# e.g. devel_llvm10_VARS= MAKE_JOBS_NUMBER=2 + +. for var in ${${PKGORIGIN:S/\//_/}_VARS:C/=.*//:O:u} +. if ${var:M*@} +. undef ${var:C/.$//} +. elif ${var:M*+} +${var:C/.$//}+= ${${PKGORIGIN:S/\//_/}_VARS:M${var}=*:C/[^+]*\+=//:C/^"(.*)"$$/\1/} +. else +${var}= ${${PKGORIGIN:S/\//_/}_VARS:M${var}=*:C/[^=]*=//:C/^"(.*)"$$/\1/} +. endif +. endfor + # where 'make config' records user configuration options PORT_DBDIR?= /var/db/ports @@ -1302,52 +1320,71 @@ LDCONFIG32_DIR= libdata/ldconfig32 # At least KDE needs TMPDIR for the package building, # so we're setting it to the known default value. -.if defined(PACKAGE_BUILDING) +. if defined(PACKAGE_BUILDING) TMPDIR?= /tmp -.endif # defined(PACKAGE_BUILDING) +. endif # defined(PACKAGE_BUILDING) -.if defined(WITH_DEBUG_PORTS) -.if ${WITH_DEBUG_PORTS:M${PKGORIGIN}} -WITH_DEBUG= yes -.endif -.endif +# Enable default features unless they have been disabled by the user, and cleanup +. for feature in ${_DEFAULT_WITH_FEATURES} +. if !defined(WITHOUT_${feature:tu}) +WITH_${feature:tu}= yes +.undef WITHOUT_${feature:tu} +. endif +. endfor + +# For each Feature we support, process the +# WITH_FEATURE_PORTS and WITHOUT_FEATURE_PORTS variables +. for feature in ${_LIST_OF_WITH_FEATURES} +. if defined(WITHOUT_${feature:tu}_PORTS) && ${WITHOUT_${feature:tu}_PORTS:M${PKGORIGIN}} +# Feature disabled for this port, remove WITH_<feat> +.undef WITH_${feature:tu} +. elif defined(WITH_${feature:tu}_PORTS) && ${WITH_${feature:tu}_PORTS:M${PKGORIGIN}} +# Feature enabled for this port, set WITH_<feat> +WITH_${feature:tu}= yes +. endif +. endfor + +. if defined(USE_LTO) +WITH_LTO= ${USE_LTO} +WARNING+= USE_LTO is deprecated in favor of WITH_LTO +. endif .include "${PORTSDIR}/Mk/bsd.default-versions.mk" .include "${PORTSDIR}/Mk/bsd.options.mk" -.endif +. endif # End of options section. # Start of pre-makefile section. -.if !defined(AFTERPORTMK) && !defined(INOPTIONSMK) +. if !defined(AFTERPORTMK) && !defined(INOPTIONSMK) -.if defined(_PREMKINCLUDED) +. if defined(_PREMKINCLUDED) DEV_ERROR+= "you cannot include bsd.port[.pre].mk twice" -.endif +. endif _PREMKINCLUDED= yes -.if defined(PORTVERSION) -.if ${PORTVERSION:M*[-_,]*}x != x +. if defined(PORTVERSION) +. if ${PORTVERSION:M*[-_,]*}x != x IGNORE= PORTVERSION ${PORTVERSION} may not contain '-' '_' or ',' -.endif -.if defined(DISTVERSION) +. endif +. if defined(DISTVERSION) DEV_ERROR+= "Defining both PORTVERSION and DISTVERSION is wrong, only set one, if necessary, set DISTNAME" -.endif +. endif DISTVERSION?= ${PORTVERSION:S/:/::/g} -.elif defined(DISTVERSION) +. elif defined(DISTVERSION) PORTVERSION= ${DISTVERSION:tl:C/([a-z])[a-z]+/\1/g:C/([0-9])([a-z])/\1.\2/g:C/:(.)/\1/g:C/[^a-z0-9+]+/./g} -.endif +. endif PORTREVISION?= 0 -.if ${PORTREVISION} != 0 +. if ${PORTREVISION} != 0 _SUF1= _${PORTREVISION} -.endif +. endif PORTEPOCH?= 0 -.if ${PORTEPOCH} != 0 +. if ${PORTEPOCH} != 0 _SUF2= ,${PORTEPOCH} -.endif +. endif PKGVERSION= ${PORTVERSION:C/[-_,]/./g}${_SUF1}${_SUF2} PKGNAME= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PKGVERSION} @@ -1370,156 +1407,112 @@ PREFIX?= ${LOCALBASE} PKGCOMPATDIR?= ${LOCALBASE}/lib/compat/pkg -.if defined(USE_LOCAL_MK) +. if defined(USE_LOCAL_MK) .include "${PORTSDIR}/Mk/bsd.local.mk" -.endif -.for odir in ${OVERLAYS} +. endif +. for odir in ${OVERLAYS} .sinclude "${odir}/Mk/bsd.overlay.mk" -.endfor - -.if defined(USE_XORG) && (!defined(USES) || !${USES:Mxorg}) -DEV_WARNING+= "Using USE_XORG alone is deprecated, please use USES=xorg" -USES+= xorg -.endif - -.if defined(USE_PHP) && (!defined(USES) || ( defined(USES) && !${USES:Mphp*} )) -DEV_WARNING+= "Using USE_PHP alone is deprecated, please use USES=php" -USES+= php -.endif +. endfor -.if defined(USE_JAVA) +. if defined(USE_JAVA) .include "${PORTSDIR}/Mk/bsd.java.mk" -.endif - -.if defined(USE_RUBY) -.include "${PORTSDIR}/Mk/bsd.ruby.mk" -.endif +. endif -.if defined(USE_OCAML) +. if defined(USE_OCAML) .include "${PORTSDIR}/Mk/bsd.ocaml.mk" -.endif +. endif -.if defined(USE_APACHE_BUILD) +. if defined(USE_APACHE_BUILD) USES+= apache:build,${USE_APACHE_BUILD:C/2([0-9])/2.\1/g} -.elif defined(USE_APACHE_RUN) +. elif defined(USE_APACHE_RUN) USES+= apache:run,${USE_APACHE_RUN:C/2([0-9])/2.\1/g} -.elif defined(USE_APACHE) +. elif defined(USE_APACHE) USE_APACHE:= ${USE_APACHE:S/common/server,/} USES+= apache:${USE_APACHE:C/2([0-9])/2.\1/g} -.endif - -.if defined(USE_TEX) -.include "${PORTSDIR}/Mk/bsd.tex.mk" -.endif +. endif -.if defined(USE_GECKO) +. if defined(USE_GECKO) .include "${PORTSDIR}/Mk/bsd.gecko.mk" -.endif - -.if (defined(USE_GNOME) || defined(INSTALLS_ICONS)) && empty(USES:Mgnome) -DEV_WARNING+= "Using USE_GNOME alone is deprecated, please add USES=gnome." -USES+= gnome -.endif - -.if defined(USE_MATE) && empty(USES:Mmate) -DEV_WARNING+= "Using USE_MATE alone is deprecated, please add USES=mate." -USES+= mate -.endif - -.if defined(USE_GL) && (!defined(USES) || !${USES:Mgl}) -DEV_WARNING+= "Using USE_GL alone is deprecated, please add USES=gl." -USES+= gl -.endif - -.if defined(USE_SDL) && (!defined(USES) || !${USES:Msdl}) -DEV_WARNING+= "Using USE_SDL alone is deprecated, please add USES=sdl." -USES+= sdl -.endif +. endif -.if defined(USE_MYSQL) +. if defined(USE_MYSQL) USE_MYSQL:= ${USE_MYSQL:N[yY][eE][sS]:Nclient} -.if defined(WANT_MYSQL_VER) -.if empty(USE_MYSQL) +. if defined(WANT_MYSQL_VER) +. if empty(USE_MYSQL) USE_MYSQL:=${WANT_MYSQL_VER} -.else +. else USE_MYSQL:=${USE_MYSQL},${WANT_MYSQL_VER} -.endif -.endif +. endif +. endif USES+=mysql:${USE_MYSQL} -.endif +. endif -.if defined(WANT_WX) || defined(USE_WX) || defined(USE_WX_NOT) +. if defined(WANT_WX) || defined(USE_WX) || defined(USE_WX_NOT) .include "${PORTSDIR}/Mk/bsd.wx.mk" -.endif - -.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER1) -.include "${PORTSDIR}/Mk/bsd.gstreamer.mk" -.endif +. endif -.if !defined(UID) -UID!= ${ID} -u -.endif +UID?= ${.MAKE.UID} DESTDIRNAME?= DESTDIR # setup empty variables for USES targets -.for target in sanity fetch extract patch configure build install test package stage +. for target in sanity fetch extract patch configure build install test package stage _USES_${target}?= -.endfor +. endfor # Loading features -.for f in ${USES} +. for f in ${USES} _f:= ${f:C/\:.*//} -.if !defined(${_f}_ARGS) +. if !defined(${_f}_ARGS) ${_f}_ARGS:= ${f:C/^[^\:]*(\:|\$)//:S/,/ /g} -.endif -.endfor -.for f in ${USES} +. endif +. endfor +. for f in ${USES} .undef _usefound -.for udir in ${OVERLAYS:C,$,/Mk/Uses,} ${USESDIR} +. for udir in ${OVERLAYS:C,$,/Mk/Uses,} ${USESDIR} _usefile= ${udir}/${f:C/\:.*//}.mk -.if exists(${_usefile}) && !defined(_usefound) +. if exists(${_usefile}) && !defined(_usefound) _usefound= .include "${_usefile}" -.endif -.endfor -.if !defined(_usefound) +. endif +. endfor +. if !defined(_usefound) ERROR+= "Unknown USES=${f:C/\:.*//}" -.endif -.endfor +. endif +. endfor -.if !empty(FLAVORS) -. if ${FLAVORS:Mall} +. if !empty(FLAVORS) +. if ${FLAVORS:Mall} DEV_ERROR+= "FLAVORS cannot contain 'all', it is a reserved value" -. endif -. for f in ${FLAVORS} -. if ${f:C/[[:lower:][:digit:]_]//g} +. endif +. for f in ${FLAVORS} +. if ${f:C/[[:lower:][:digit:]_]//g} _BAD_FLAVOR_NAMES+= ${f} -. endif -. endfor -. if !empty(_BAD_FLAVOR_NAMES) +. endif +. endfor +. if !empty(_BAD_FLAVOR_NAMES) DEV_ERROR+= "FLAVORS contains flavors that are not all [a-z0-9_]: ${_BAD_FLAVOR_NAMES}" -. endif -.endif +. endif +. endif -.if !empty(FLAVOR) -. if empty(FLAVORS) +. if !empty(FLAVOR) +. if empty(FLAVORS) IGNORE= FLAVOR is defined (to ${FLAVOR}) while this port does not have FLAVORS -. elif ! ${FLAVORS:M${FLAVOR}} +. elif ! ${FLAVORS:M${FLAVOR}} IGNORE= Unknown flavor '${FLAVOR}', possible flavors: ${FLAVORS} -. endif -.endif +. endif +. endif -.if !empty(FLAVORS) && empty(FLAVOR) +. if !empty(FLAVORS) && empty(FLAVOR) FLAVOR= ${FLAVORS:[1]} -.endif +. endif # Reorder FLAVORS so the default is first if set by the port. -.if empty(_FLAVOR) && !empty(FLAVORS) && !empty(FLAVOR) +. if empty(_FLAVOR) && !empty(FLAVORS) && !empty(FLAVOR) FLAVORS:= ${FLAVOR} ${FLAVORS:N${FLAVOR}} -.endif +. endif -.if !empty(FLAVOR) && !defined(_DID_FLAVORS_HELPERS) +. if !empty(FLAVOR) && !defined(_DID_FLAVORS_HELPERS) _DID_FLAVORS_HELPERS= yes _FLAVOR_HELPERS_OVERRIDE= DESCR PLIST PKGNAMEPREFIX PKGNAMESUFFIX _FLAVOR_HELPERS_APPEND= CONFLICTS CONFLICTS_BUILD CONFLICTS_INSTALL \ @@ -1527,52 +1520,51 @@ _FLAVOR_HELPERS_APPEND= CONFLICTS CONFLICTS_BUILD CONFLICTS_INSTALL \ FETCH_DEPENDS BUILD_DEPENDS LIB_DEPENDS \ RUN_DEPENDS TEST_DEPENDS # These overwrite the current value -.for v in ${_FLAVOR_HELPERS_OVERRIDE} -.if defined(${FLAVOR}_${v}) +. for v in ${_FLAVOR_HELPERS_OVERRIDE} +. if defined(${FLAVOR}_${v}) ${v}= ${${FLAVOR}_${v}} -.endif -.endfor +. endif +. endfor # These append to the current value -.for v in ${_FLAVOR_HELPERS_APPEND} -.if defined(${FLAVOR}_${v}) +. for v in ${_FLAVOR_HELPERS_APPEND} +. if defined(${FLAVOR}_${v}) ${v}+= ${${FLAVOR}_${v}} -.endif -.endfor +. endif +. endfor -.for v in BROKEN IGNORE -.if defined(${FLAVOR}_${v}) +. for v in BROKEN IGNORE +. if defined(${FLAVOR}_${v}) ${v}= flavor "${FLAVOR}" ${${FLAVOR}_${v}} -.endif -.endfor -.if defined(FLAVORS_SUB) +. endif +. endfor +. if defined(FLAVORS_SUB) PLIST_SUB+= ${FLAVORS:N${FLAVOR}:@v@${v:tu}="\@comment " NO_${v:tu}=""@} PLIST_SUB+= ${FLAVOR:tu}="" NO_${FLAVOR:tu}="@comment " SUB_LIST+= ${FLAVORS:N${FLAVOR}:@v@${v:tu}="\@comment " NO_${v:tu}=""@} SUB_LIST+= ${FLAVOR:tu}="" NO_${FLAVOR:tu}="@comment " -.endif -.endif # defined(${FLAVOR}) - +. endif +. endif # defined(${FLAVOR}) EXTRACT_SUFX?= .tar.gz -.if defined(USE_LINUX_PREFIX) +. if defined(USE_LINUX_PREFIX) PREFIX= ${LINUXBASE} DATADIR?= ${PREFIX}/usr/share/${PORTNAME} -DOCSDIR?= ${PREFIX}/usr/share/doc/${PORTNAME}-${PORTVERSION} +DOCSDIR?= ${PREFIX}/usr/share/doc/${PORTNAME}-${DISTVERSION} NO_LICENSES_INSTALL= yes NO_MTREE= yes -.endif +. endif # You can force skipping these test by defining IGNORE_PATH_CHECKS -.if !defined(IGNORE_PATH_CHECKS) -.if ! ${PREFIX:M/*} +. if !defined(IGNORE_PATH_CHECKS) +. if ! ${PREFIX:M/*} .BEGIN: @${ECHO_MSG} "PREFIX must be defined as an absolute path so that when 'make'" @${ECHO_MSG} "is invoked in the work area PREFIX points to the right place." @${FALSE} -.endif -.endif +. endif +. endif DATADIR?= ${PREFIX}/share/${PORTNAME} DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME} @@ -1590,38 +1582,49 @@ PKGNG_ORIGIN= ${PKG_ORIGIN} WITH_PKGNG?= yes WITH_PKG?= ${WITH_PKGNG} -.endif +. endif # End of pre-makefile section. # Start of post-makefile section. -.if !defined(BEFOREPORTMK) && !defined(INOPTIONSMK) +. if !defined(BEFOREPORTMK) && !defined(INOPTIONSMK) -.if defined(_POSTMKINCLUDED) +. if defined(_POSTMKINCLUDED) DEV_ERROR+= "${PKGNAME}: Makefile error: you cannot include bsd.port[.post].mk twice" @${FALSE} -.endif +. endif _POSTMKINCLUDED= yes -.if defined(BUNDLE_LIBS) +. if defined(BUNDLE_LIBS) PKG_NOTES+= no_provide_shlib PKG_NOTE_no_provide_shlib= yes -.endif +. endif -.if defined(DEPRECATED) +. if defined(DEPRECATED) PKG_NOTES+= deprecated PKG_NOTE_deprecated=${DEPRECATED} -.endif +. endif -.if defined(EXPIRATION_DATE) +. if defined(EXPIRATION_DATE) PKG_NOTES+= expiration_date PKG_NOTE_expiration_date= ${EXPIRATION_DATE} -.endif +. endif -.if !empty(FLAVOR) +. if !empty(FLAVOR) PKG_NOTES+= flavor PKG_NOTE_flavor= ${FLAVOR} -.endif +. endif + +WRK_ENV+= HOME=${WRKDIR} \ + PWD="$${PWD}" \ + __MAKE_CONF=${NONEXISTENT} +. for e in OSVERSION PATH TERM TMPDIR \ + UNAME_b UNAME_i UNAME_K UNAME_m UNAME_n \ + UNAME_p UNAME_r UNAME_s UNAME_U UNAME_v +. ifdef ${e} +WRK_ENV+= ${e}=${${e}:Q} +. endif +. endfor TEST_ARGS?= ${MAKE_ARGS} TEST_ENV?= ${MAKE_ENV} @@ -1637,10 +1640,10 @@ MAKE_ENV+= XDG_DATA_HOME=${WRKDIR} \ HOME=${WRKDIR} # Respect TMPDIR passed via make.conf or similar and pass it down # to configure and make. -.if defined(TMPDIR) +. if defined(TMPDIR) MAKE_ENV+= TMPDIR="${TMPDIR}" CONFIGURE_ENV+= TMPDIR="${TMPDIR}" -.endif # defined(TMPDIR) +. endif # defined(TMPDIR) QA_ENV+= STAGEDIR=${STAGEDIR} \ PREFIX=${PREFIX} \ @@ -1658,29 +1661,29 @@ QA_ENV+= STAGEDIR=${STAGEDIR} \ PKGORIGIN=${PKGORIGIN} \ LIB_RUN_DEPENDS='${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}' \ UNIFIED_DEPENDS=${_UNIFIED_DEPENDS:C,([^:]*:[^:]*):?.*,\1,:O:u:Q} \ + WANTED_LIBRARIES='${LIB_DEPENDS:C,([^:]*):([^:]*):?.*,\1,}' \ PKGBASE=${PKGBASE} \ LICENSE="${LICENSE}" \ LICENSE_PERMS="${_LICENSE_PERMS}" \ DISABLE_LICENSES="${DISABLE_LICENSES:Dyes}" \ PORTNAME=${PORTNAME} \ NO_ARCH=${NO_ARCH} \ - "NO_ARCH_IGNORE=${NO_ARCH_IGNORE}" \ - USE_RUBY=${USE_RUBY} -.if !empty(USES:Mssl) + "NO_ARCH_IGNORE=${NO_ARCH_IGNORE}" +. if !empty(USES:Mssl) QA_ENV+= USESSSL=yes -.endif -.if !empty(USES:Mdesktop-file-utils) +. endif +. if !empty(USES:Mdesktop-file-utils) QA_ENV+= USESDESKTOPFILEUTILS=yes -.endif -.if !empty(USES:Mlibtool*) +. endif +. if !empty(USES:Mlibtool*) QA_ENV+= USESLIBTOOL=yes -.endif -.if !empty(USES:Mshared-mime-info) +. endif +. if !empty(USES:Mshared-mime-info) QA_ENV+= USESSHAREDMIMEINFO=yes -.endif -.if !empty(USES:Mterminfo) +. endif +. if !empty(USES:Mterminfo) QA_ENV+= USESTERMINFO=yes -.endif +. endif CO_ENV+= STAGEDIR=${STAGEDIR} \ PREFIX=${PREFIX} \ @@ -1694,66 +1697,73 @@ CO_ENV+= STAGEDIR=${STAGEDIR} \ PORT_OPTIONS="${PORT_OPTIONS}" \ PORTSDIR="${PORTSDIR}" -.if defined(CROSS_SYSROOT) +. if defined(CROSS_SYSROOT) PKG_ENV+= ABI_FILE=${CROSS_SYSROOT}/bin/sh MAKE_ENV+= NM=${NM} \ STRIPBIN=${STRIPBIN} \ PKG_CONFIG_SYSROOT_DIR="${CROSS_SYSROOT}" CONFIGURE_ENV+= PKG_CONFIG_SYSROOT_DIR="${CROSS_SYSROOT}" -.endif +. endif -.if empty(FLAVOR) +. if empty(FLAVOR) _WRKDIR= work -.else +. else _WRKDIR= work-${FLAVOR} -.endif +. endif WRKDIR?= ${WRKDIRPREFIX}${.CURDIR}/${_WRKDIR} BINARY_LINKDIR= ${WRKDIR}/.bin PATH:= ${BINARY_LINKDIR}:${PATH} -.if !${MAKE_ENV:MPATH=*} && !${CONFIGURE_ENV:MPATH=*} +. if !${MAKE_ENV:MPATH=*} && !${CONFIGURE_ENV:MPATH=*} MAKE_ENV+= PATH=${PATH} CONFIGURE_ENV+= PATH=${PATH} -.endif +. endif + +PKGCONFIG_LINKDIR= ${WRKDIR}/.pkgconfig +PKGCONFIG_BASEDIR= /usr/libdata/pkgconfig +. if !${MAKE_ENV:MPKG_CONFIG_LIBDIR=*} && !${CONFIGURE_ENV:MPKG_CONFIG_LIBDIR=*} +MAKE_ENV+= PKG_CONFIG_LIBDIR=${PKGCONFIG_LINKDIR}:${LOCALBASE}/libdata/pkgconfig:${LOCALBASE}/share/pkgconfig:${PKGCONFIG_BASEDIR} +CONFIGURE_ENV+= PKG_CONFIG_LIBDIR=${PKGCONFIG_LINKDIR}:${LOCALBASE}/libdata/pkgconfig:${LOCALBASE}/share/pkgconfig:${PKGCONFIG_BASEDIR} +. endif -.if !defined(IGNORE_MASTER_SITE_GITHUB) && defined(USE_GITHUB) && empty(USE_GITHUB:Mnodefault) -.if defined(WRKSRC) +. if !defined(IGNORE_MASTER_SITE_GITHUB) && defined(USE_GITHUB) && empty(USE_GITHUB:Mnodefault) +. if defined(WRKSRC) DEV_WARNING+= "You are using USE_GITHUB and WRKSRC is set which is wrong. Set GH_PROJECT correctly or set WRKSRC_SUBDIR and remove WRKSRC entirely." -.endif +. endif WRKSRC?= ${WRKDIR}/${GH_PROJECT_DEFAULT}-${GH_TAGNAME_EXTRACT} -.endif +. endif -.if !default(IGNORE_MASTER_SITE_GITLAB) && defined(USE_GITLAB) && empty(USE_GITLAB:Mnodefault) -.if defined(WRKSRC) +. if !default(IGNORE_MASTER_SITE_GITLAB) && defined(USE_GITLAB) && empty(USE_GITLAB:Mnodefault) +. if defined(WRKSRC) DEV_WARNING+= "You are using USE_GITLAB and WRKSRC is set which is wrong. Set GL_PROJECT, GL_ACCOUNT correctly, and/or set WRKSRC_SUBDIR and remove WRKSRC entirely." -.endif -WRKSRC?= ${WRKDIR}/${GL_PROJECT}-${GL_COMMIT} -.endif +. endif +WRKSRC?= ${WRKDIR}/${GL_PROJECT}-${GL_TAGNAME} +. endif # If the distname is not extracting into a specific subdirectory, have the # ports framework force extract into a subdirectory so that metadata files # do not get in the way of the build, and vice-versa. -.if defined(NO_WRKSUBDIR) +. if defined(NO_WRKSUBDIR) # Some ports have DISTNAME=PORTNAME, and USE_RC_SUBR=PORTNAME, in those case, # the rc file will conflict with WRKSRC, as WRKSRC is artificial, make it the # most unlikely to conflict as we can. WRKSRC?= ${WRKDIR}/${PKGNAME} EXTRACT_WRKDIR:= ${WRKSRC} -.else +. else WRKSRC?= ${WRKDIR}/${DISTNAME} EXTRACT_WRKDIR:= ${WRKDIR} -.endif -.if defined(WRKSRC_SUBDIR) +. endif +. if defined(WRKSRC_SUBDIR) WRKSRC:= ${WRKSRC}/${WRKSRC_SUBDIR} -.endif +. endif -.if defined(CONFIGURE_OUTSOURCE) +. if defined(CONFIGURE_OUTSOURCE) CONFIGURE_CMD?= ${WRKSRC}/${CONFIGURE_SCRIPT} CONFIGURE_WRKSRC?= ${WRKDIR}/.build BUILD_WRKSRC?= ${CONFIGURE_WRKSRC} INSTALL_WRKSRC?= ${CONFIGURE_WRKSRC} TEST_WRKSRC?= ${CONFIGURE_WRKSRC} -.endif +. endif PATCH_WRKSRC?= ${WRKSRC} CONFIGURE_WRKSRC?= ${WRKSRC} @@ -1785,38 +1795,20 @@ PLIST_SUB_SED?= ${PLIST_SUB_SED_tmp3:C/([^=]*)="?([^"]*)"?/s!\2!%%\1%%!g;/g:C/\. # sub-configure will not # survive double space CFLAGS:= ${CFLAGS:C/ $//} -.if defined(WITHOUT_CPU_CFLAGS) -.if defined(_CPUCFLAGS) -.if !empty(_CPUCFLAGS) +. if defined(WITHOUT_CPU_CFLAGS) +. if defined(_CPUCFLAGS) +. if !empty(_CPUCFLAGS) CFLAGS:= ${CFLAGS:C/${_CPUCFLAGS}//} -.endif -.endif -.endif - -# Reset value from bsd.own.mk. -.if defined(WITH_DEBUG) -.if !defined(INSTALL_STRIPPED) -STRIP= #none -MAKE_ENV+= DONTSTRIP=yes -STRIP_CMD= ${TRUE} -.endif -DEBUG_FLAGS?= -g -CFLAGS:= ${CFLAGS:N-O*:N-fno-strict*} ${DEBUG_FLAGS} -.if defined(INSTALL_TARGET) -INSTALL_TARGET:= ${INSTALL_TARGET:S/^install-strip$/install/g} -.endif -.endif - -.if defined(USE_LTO) -.include "${PORTSDIR}/Mk/bsd.lto.mk" -.endif +. endif +. endif +. endif -.if !defined(WITHOUT_SSP) -.include "${PORTSDIR}/Mk/bsd.ssp.mk" -.endif +. for f in ${_LIST_OF_WITH_FEATURES} +. if defined(WITH_${f:tu}) +.include "${PORTSDIR}/Mk/Features/$f.mk" +. endif +. endfor -# XXX PIE support to be added here -MAKE_ENV+= NO_PIE=yes # We will control debug files. Don't let builds that use /usr/share/mk # split out debug symbols since the plist won't know to expect it. MAKE_ENV+= MK_DEBUG_FILES=no @@ -1828,121 +1820,116 @@ MAKE_SHELL?= ${SH} CONFIGURE_ENV+= SHELL=${CONFIGURE_SHELL} CONFIG_SHELL=${CONFIGURE_SHELL} MAKE_ENV+= SHELL=${MAKE_SHELL} NO_LINT=YES -.if defined(PATCHFILES) && ${PATCHFILES:M*.zip} +. if defined(PATCHFILES) && ${PATCHFILES:M*.zip} PATCH_DEPENDS+= ${LOCALBASE}/bin/unzip:archivers/unzip -.endif +. endif # Check the compatibility layer for amd64 -.if ${ARCH} == "amd64" -.if exists(/usr/lib32) +. if ${ARCH} == "amd64" +. if exists(/usr/lib32) HAVE_COMPAT_IA32_LIBS?= YES -.endif -.if !defined(HAVE_COMPAT_IA32_KERN) +. endif +. if !defined(HAVE_COMPAT_IA32_KERN) HAVE_COMPAT_IA32_KERN!= if ${SYSCTL} -n compat.ia32.maxvmem >/dev/null 2>&1; then echo YES; fi; echo -.if empty(HAVE_COMPAT_IA32_KERN) +. if empty(HAVE_COMPAT_IA32_KERN) .undef HAVE_COMPAT_IA32_KERN -.endif -.endif -.endif +. endif +. endif +. endif _EXPORTED_VARS+= HAVE_COMPAT_IA32_KERN -.if defined(IA32_BINARY_PORT) && ${ARCH} != "i386" -.if ${ARCH} == "amd64" -.if !defined(HAVE_COMPAT_IA32_KERN) +. if defined(IA32_BINARY_PORT) && ${ARCH} != "i386" +. if ${ARCH} == "amd64" +. if !defined(HAVE_COMPAT_IA32_KERN) IGNORE= requires a kernel with compiled-in IA32 compatibility -.elif !defined(HAVE_COMPAT_IA32_LIBS) +. elif !defined(HAVE_COMPAT_IA32_LIBS) IGNORE= requires 32-bit libraries installed under /usr/lib32 -.endif +. endif _LDCONFIG_FLAGS=-32 LIB32DIR= lib32 -.else +. else IGNORE= requires i386 (or compatible) platform to run -.endif -.else +. endif +. else LIB32DIR= lib -.endif +. endif PLIST_SUB+= LIB32DIR=${LIB32DIR} -.if ${WITH_PKG} == devel +. if ${WITH_PKG} == devel PKG_ORIGIN= ports-mgmt/pkg-devel -.endif +. endif -.if !defined(PKG_DEPENDS) && !defined(CLEAN_FETCH_ENV) +. if !defined(PKG_DEPENDS) && !defined(CLEAN_FETCH_ENV) PKG_DEPENDS+= ${LOCALBASE}/sbin/pkg:${PKG_ORIGIN} -.endif +. endif -.if defined(USE_GCC) +. if defined(USE_GCC) .include "${PORTSDIR}/Mk/bsd.gcc.mk" -.endif +. endif -.if defined(LLD_UNSAFE) && ${/usr/bin/ld:L:tA} == /usr/bin/ld.lld +. if defined(LLD_UNSAFE) && ${/usr/bin/ld:L:tA} == /usr/bin/ld.lld LDFLAGS+= -fuse-ld=bfd BINARY_ALIAS+= ld=${LD} -. if !defined(USE_BINUTILS) -. if exists(/usr/bin/ld.bfd) +. if !defined(USE_BINUTILS) +. if exists(/usr/bin/ld.bfd) LD= /usr/bin/ld.bfd CONFIGURE_ENV+= LD=${LD} MAKE_ENV+= LD=${LD} -. else +. else USE_BINUTILS= yes +. endif +. endif . endif -. endif -.endif -.if defined(USE_BINUTILS) && !defined(DISABLE_BINUTILS) +. if defined(USE_BINUTILS) && !defined(DISABLE_BINUTILS) BUILD_DEPENDS+= ${LOCALBASE}/bin/as:devel/binutils BINUTILS?= ADDR2LINE AR AS CPPFILT GPROF LD NM OBJCOPY OBJDUMP RANLIB \ READELF SIZE STRINGS BINUTILS_NO_MAKE_ENV?= -. for b in ${BINUTILS} +. for b in ${BINUTILS} ${b}= ${LOCALBASE}/bin/${b:C/PP/++/:tl} -. if defined(GNU_CONFIGURE) || defined(BINUTILS_CONFIGURE) +. if defined(GNU_CONFIGURE) || defined(BINUTILS_CONFIGURE) CONFIGURE_ENV+= ${b}="${${b}}" -. endif -. if ${BINUTILS_NO_MAKE_ENV:M${b}} == "" +. endif +. if ${BINUTILS_NO_MAKE_ENV:M${b}} == "" MAKE_ENV+= ${b}="${${b}}" -. endif -. endfor -.endif - -.if defined(USE_OPENLDAP) || defined(WANT_OPENLDAP_VER) -.include "${PORTSDIR}/Mk/bsd.ldap.mk" -.endif +. endif +. endfor +. endif -.if defined(USE_RC_SUBR) +. if defined(USE_RC_SUBR) SUB_FILES+= ${USE_RC_SUBR} -.endif +. endif -.if defined(USE_LDCONFIG) && ${USE_LDCONFIG:tl} == "yes" +. if defined(USE_LDCONFIG) && ${USE_LDCONFIG:tl} == "yes" USE_LDCONFIG= ${PREFIX}/lib -.endif -.if defined(USE_LDCONFIG32) && ${USE_LDCONFIG32:tl} == "yes" +. endif +. if defined(USE_LDCONFIG32) && ${USE_LDCONFIG32:tl} == "yes" IGNORE= has USE_LDCONFIG32 set to yes, which is not correct -.endif +. endif -.if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) -.if defined(USE_LINUX_PREFIX) +. if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) +. if defined(USE_LINUX_PREFIX) PLIST_FILES+= "@ldconfig-linux ${LINUXBASE}" -.else +. else PLIST_FILES+= "@ldconfig" -.endif -.endif +. endif +. endif PKG_IGNORE_DEPENDS?= 'this_port_does_not_exist' -.if defined(_DESTDIR_VIA_ENV) +. if defined(_DESTDIR_VIA_ENV) MAKE_ENV+= ${DESTDIRNAME}=${STAGEDIR} -.else +. else MAKE_ARGS+= ${DESTDIRNAME}=${STAGEDIR} -.endif +. endif -.if defined(NO_PREFIX_RMDIR) +. if defined(NO_PREFIX_RMDIR) CO_ENV+= NO_PREFIX_RMDIR=1 -.else +. else CO_ENV+= NO_PREFIX_RMDIR=0 -.endif - +. endif METADIR= ${WRKDIR}/.metadir @@ -1951,99 +1938,75 @@ PKGPOSTINSTALL?= ${PKGDIR}/pkg-post-install PKGPREDEINSTALL?= ${PKGDIR}/pkg-pre-deinstall PKGPOSTDEINSTALL?= ${PKGDIR}/pkg-post-deinstall -_FORCE_POST_PATTERNS= rmdir kldxref mkfontscale mkfontdir fc-cache \ - fonts.dir fonts.scale gtk-update-icon-cache \ - gio-querymodules \ - gtk-query-immodules \ - ldconfig \ - load-octave-pkg \ - ocamlfind \ - update-desktop-database update-mime-database \ - gdk-pixbuf-query-loaders catalog.ports \ - glib-compile-schemas \ - ccache-update-links - -.if defined(USE_LOCAL_MK) +. if defined(USE_LOCAL_MK) .include "${PORTSDIR}/Mk/bsd.local.mk" -.endif -.for odir in ${OVERLAYS} +. endif +. for odir in ${OVERLAYS} .sinclude "${odir}/Mk/bsd.overlay.mk" -.endfor - -.if defined(USE_XORG) && (!defined(USES) || ( defined(USES) && !${USES:Mxorg} )) -DEV_WARNING+= "Using USE_XORG alone is deprecated, please use USES=xorg" -_USES_POST+= xorg -.endif - -.if defined(USE_GSTREAMER1) -.include "${PORTSDIR}/Mk/bsd.gstreamer.mk" -.endif +. endfor -.if defined(USE_JAVA) +. if defined(USE_JAVA) .include "${PORTSDIR}/Mk/bsd.java.mk" -.endif +. endif -.if defined(USE_OCAML) +. if defined(USE_OCAML) .include "${PORTSDIR}/Mk/bsd.ocaml.mk" -.endif - -.if defined(USE_PHP) && (!defined(USES) || ( defined(USES) && !${USES:Mphp*} )) -DEV_WARNING+= "Using USE_PHP alone is deprecated, please use USES=php" -_USES_POST+= php -.endif +. endif -.if defined(USE_WX) || defined(USE_WX_NOT) +. if defined(USE_WX) || defined(USE_WX_NOT) .include "${PORTSDIR}/Mk/bsd.wx.mk" -.endif +. endif -.if defined(USE_GECKO) +. if defined(USE_GECKO) .include "${PORTSDIR}/Mk/bsd.gecko.mk" -.endif +. endif -.if exists(${PORTSDIR}/Makefile.inc) +. if exists(${PORTSDIR}/Makefile.inc) .include "${PORTSDIR}/Makefile.inc" USE_SUBMAKE= yes -.endif +. endif # Loading features -.for f in ${_USES_POST} +. for f in ${_USES_POST} _f:= ${f:C/\:.*//} -.if !defined(${_f}_ARGS) +. if !defined(${_f}_ARGS) ${_f}_ARGS:= ${f:C/^[^\:]*(\:|\$)//:S/,/ /g} -.endif -.endfor -.for f in ${_USES_POST} +. endif +. endfor +. for f in ${_USES_POST} .undef _usefound -.for udir in ${OVERLAYS:C,$,/Mk/Uses,} ${USESDIR} +. for udir in ${OVERLAYS:C,$,/Mk/Uses,} ${USESDIR} _usefile= ${udir}/${f:C/\:.*//}.mk -.if exists(${_usefile}) && !defined(_usefound) +. if exists(${_usefile}) && !defined(_usefound) _usefound= .include "${_usefile}" -.endif -.endfor -.if !defined(_usefound) +. endif +. endfor +. if !defined(_usefound) ERROR+= "Unknown USES=${f:C/\:.*//}" -.endif -.endfor +. endif +. endfor -.if defined(PORTNAME) +. if defined(PORTNAME) +. if !defined(PACKAGE_BUILDING) || empty(.TARGETS) || make(all) || \ + make(check-sanity) || make(show*-errors) || make(show*-warnings) .include "${PORTSDIR}/Mk/bsd.sanity.mk" -.endif +. endif +. endif -.if defined(USE_LOCALE) -CONFIGURE_ENV+= LANG=${USE_LOCALE} LC_ALL=${USE_LOCALE} -MAKE_ENV+= LANG=${USE_LOCALE} LC_ALL=${USE_LOCALE} -.endif +. if defined(USE_LOCALE) +WRK_ENV+= LANG=${USE_LOCALE} LC_ALL=${USE_LOCALE} +. endif # Macro for doing in-place file editing using regexps. REINPLACE_ARGS may only # be used to set or override the -i argument. Any other use is considered # invalid. REINPLACE_ARGS?= -i.bak -.if defined(DEVELOPER) +. if defined(DEVELOPER) REINPLACE_CMD?= ${SETENV} WRKSRC=${WRKSRC} REWARNFILE=${REWARNFILE} ${SH} ${SCRIPTSDIR}/sed_checked.sh -.else +. else REINPLACE_CMD?= ${SED} ${REINPLACE_ARGS} -.endif +. endif FRAMEWORK_REINPLACE_CMD?= ${SED} -i.bak # Names of cookies used to skip already completed stages @@ -2078,74 +2041,73 @@ MAKE_ENV+= PREFIX=${PREFIX} \ CC="${CC}" CFLAGS="${CFLAGS}" \ CPP="${CPP}" CPPFLAGS="${CPPFLAGS}" \ LDFLAGS="${LDFLAGS}" LIBS="${LIBS}" \ - CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \ - MANPREFIX="${MANPREFIX}" + CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" # Add -fno-strict-aliasing to CFLAGS with optimization level -O2 or higher. # gcc 4.x enable strict aliasing optimization with -O2 which is known to break # a lot of ports. -.if !defined(WITHOUT_NO_STRICT_ALIASING) -.if ${CC} != "icc" -.if empty(CFLAGS:M-fno-strict-aliasing) +. if !defined(WITHOUT_NO_STRICT_ALIASING) +. if ${CC} != "icc" +. if empty(CFLAGS:M-fno-strict-aliasing) CFLAGS+= -fno-strict-aliasing -.endif -.endif -.endif +. endif +. endif +. endif -.for lang in C CXX -.if defined(USE_${lang}STD) +. for lang in C CXX +. if defined(USE_${lang}STD) ${lang}FLAGS:= ${${lang}FLAGS:N-std=*} -std=${USE_${lang}STD} -.endif +. endif ${lang}FLAGS+= ${${lang}FLAGS_${ARCH}} -.endfor +. endfor LDFLAGS+= ${LDFLAGS_${ARCH}} # Multiple make jobs support -.if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE) +. if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE) _MAKE_JOBS?= # MAKE_JOBS_NUMBER= 1 -.else -.if defined(MAKE_JOBS_NUMBER) +. else +. if defined(MAKE_JOBS_NUMBER) _MAKE_JOBS_NUMBER:= ${MAKE_JOBS_NUMBER} -.else -.if !defined(_SMP_CPUS) -_SMP_CPUS!= ${SYSCTL} -n kern.smp.cpus -.endif +. else +. if !defined(_SMP_CPUS) +_SMP_CPUS!= ${NPROC} 2>/dev/null || ${SYSCTL} -n kern.smp.cpus +. endif _EXPORTED_VARS+= _SMP_CPUS _MAKE_JOBS_NUMBER= ${_SMP_CPUS} -.endif -.if defined(MAKE_JOBS_NUMBER_LIMIT) && ( ${MAKE_JOBS_NUMBER_LIMIT} < ${_MAKE_JOBS_NUMBER} ) +. endif +. if defined(MAKE_JOBS_NUMBER_LIMIT) && ( ${MAKE_JOBS_NUMBER_LIMIT} < ${_MAKE_JOBS_NUMBER} ) MAKE_JOBS_NUMBER= ${MAKE_JOBS_NUMBER_LIMIT} -.else +. else MAKE_JOBS_NUMBER= ${_MAKE_JOBS_NUMBER} -.endif +. endif _MAKE_JOBS?= -j${MAKE_JOBS_NUMBER} BUILD_FAIL_MESSAGE+= Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer. -.endif +. endif .include "${PORTSDIR}/Mk/bsd.ccache.mk" -.if !make(makesum) +. if !make(makesum) FETCH_ENV?= SSL_NO_VERIFY_PEER=1 SSL_NO_VERIFY_HOSTNAME=1 -.endif +. endif FETCH_BINARY?= /usr/bin/fetch FETCH_ARGS?= -Fpr FETCH_REGET?= 1 FETCH_CMD?= ${FETCH_BINARY} ${FETCH_ARGS} -.if defined(RANDOMIZE_MASTER_SITES) -.if exists(/usr/games/random) +. if defined(RANDOMIZE_MASTER_SITES) +. if exists(/usr/games/random) RANDOM_CMD?= /usr/games/random -.elif exists(/usr/bin/random) +. elif exists(/usr/bin/random) RANDOM_CMD?= /usr/bin/random -.endif -.if defined(RANDOM_CMD) && !empty(RANDOM_CMD) +. endif +. if defined(RANDOM_CMD) && !empty(RANDOM_CMD) RANDOM_ARGS?= -w -f - _RANDOMIZE_SITES= ${RANDOM_CMD} ${RANDOM_ARGS} -.endif -.endif +. endif +. endif TOUCH?= /usr/bin/touch TOUCH_FLAGS?= -f @@ -2154,35 +2116,35 @@ DISTORIG?= .bak.orig PATCH?= /usr/bin/patch PATCH_STRIP?= -p0 PATCH_DIST_STRIP?= -p0 -.if defined(PATCH_DEBUG) +. if defined(PATCH_DEBUG) PATCH_DEBUG_TMP= yes PATCH_ARGS?= --forward -E ${PATCH_STRIP} PATCH_DIST_ARGS?= --suffix ${DISTORIG} --forward -E ${PATCH_DIST_STRIP} -.else +. else PATCH_ARGS?= --forward --quiet -E ${PATCH_STRIP} PATCH_DIST_ARGS?= --suffix ${DISTORIG} --forward --quiet -E ${PATCH_DIST_STRIP} -.endif -.if !defined(QUIET) +. endif +. if !defined(QUIET) PATCH_SILENT= PATCH_SILENT=yes -.endif -.if defined(BATCH) +. endif +. if defined(BATCH) PATCH_ARGS+= --batch PATCH_DIST_ARGS+= --batch -.endif +. endif # Prevent breakage with VERSION_CONTROL=numbered PATCH_ARGS+= -V simple PATCH_DIST_ARGS+= -V simple -.if defined(PATCH_CHECK_ONLY) +. if defined(PATCH_CHECK_ONLY) PATCH_ARGS+= -C PATCH_DIST_ARGS+= -C -.endif +. endif -.if ${PATCH} == "/usr/bin/patch" +. if ${PATCH} == "/usr/bin/patch" PATCH_ARGS+= --suffix .orig PATCH_DIST_ARGS+= --suffix .orig -.endif +. endif TAR?= /usr/bin/tar @@ -2192,13 +2154,13 @@ EXTRACT_BEFORE_ARGS?= -xf EXTRACT_AFTER_ARGS?= --no-same-owner --no-same-permissions # Figure out where the local mtree file is -.if !defined(MTREE_FILE) && !defined(NO_MTREE) -.if ${PREFIX} == /usr +. if !defined(MTREE_FILE) && !defined(NO_MTREE) +. if ${PREFIX} == /usr MTREE_FILE= /etc/mtree/BSD.usr.dist -.else +. else MTREE_FILE= ${PORTSDIR}/Templates/BSD.local.dist -.endif -.endif +. endif +. endif MTREE_CMD?= /usr/sbin/mtree MTREE_ARGS?= -U ${MTREE_FOLLOWS_SYMLINKS} -f ${MTREE_FILE} -d -e -p @@ -2233,9 +2195,9 @@ COPYTREE_SHARE= ${SH} -c '(${FIND} -Ed $$1 $$3 | ${CPIO} -dumpl $$2 >/dev/null 2 # The user can override the NO_PACKAGE by specifying this from # the make command line -.if defined(FORCE_PACKAGE) +. if defined(FORCE_PACKAGE) .undef NO_PACKAGE -.endif +. endif DESCR?= ${PKGDIR}/pkg-descr PLIST?= ${PKGDIR}/pkg-plist @@ -2246,31 +2208,32 @@ PKGMESSAGE?= ${PKGDIR}/pkg-message _PKGMESSAGES+= ${PKGMESSAGE} TMPPLIST?= ${WRKDIR}/.PLIST.mktmp +_PLIST?= ${WRKDIR}/.PLIST # backward compatibility for users -.if defined(_PKG_TRANSITIONING_TO_NEW_EXT) -.if defined(PKG_NOCOMPRESS) +. if defined(_PKG_TRANSITIONING_TO_NEW_EXT) +. if defined(PKG_NOCOMPRESS) PKG_SUFX?= .tar -.else +. else PKG_SUFX?= .txz -.endif +. endif PKG_COMPRESSION_FORMAT?= ${PKG_SUFX:S/.//} -.else -.if defined(PKG_SUFX) +. else +. if defined(PKG_SUFX) PKG_COMPRESSION_FORMAT?= ${PKG_SUFX:S/.//} WARNING+= "PKG_SUFX is defined, it should be replaced with PKG_COMPRESSION_FORMAT" -.endif +. endif PKG_SUFX= .pkg -.endif -.if defined(PKG_NOCOMPRESS) +. endif +. if defined(PKG_NOCOMPRESS) PKG_COMPRESSION_FORMAT?= tar -.else -#.if ${OSVERSION} > 1400000 -#PKG_COMPRESSION_FORMAT?= tzst -#.else +. else +. if ${OSVERSION} > 1400000 +PKG_COMPRESSION_FORMAT?= tzst +. else PKG_COMPRESSION_FORMAT?= txz -#.endif -.endif +. endif +. endif # where pkg(8) stores its data PKG_DBDIR?= /var/db/pkg @@ -2279,11 +2242,6 @@ ALL_TARGET?= all INSTALL_TARGET?= install INSTALL_TARGET+= ${LATE_INSTALL_ARGS} -# Integrate with the license auditing framework -.if !defined (DISABLE_LICENSES) -.include "${PORTSDIR}/Mk/bsd.licenses.mk" -.endif - # Popular master sites .include "${PORTSDIR}/Mk/bsd.sites.mk" @@ -2297,200 +2255,200 @@ _PATCH_SITES_DEFAULT?= # as per grouping rules (:something) # Organize _{MASTER,PATCH}_SITES_{DEFAULT,[^/:]+} according to grouping # rules (:something) -.for _S in ${MASTER_SITES} +. for _S in ${MASTER_SITES} _S_TEMP= ${_S:S/^${_S:C@/?:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} +. if !empty(_S_TEMP) +. for _group in ${_S_TEMP:S/,/ /g} _G_TEMP= ${_group} -. if ${_G_TEMP:C/[a-zA-Z0-9_]//g} +. if ${_G_TEMP:C/[a-zA-Z0-9_]//g} check-makevars:: @${ECHO_MSG} "The ${_S} MASTER_SITES line has" @${ECHO_MSG} "a group with invalid characters, only use [a-zA-Z0-9_]" @${FALSE} -. endif -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default +. endif +. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default check-makevars:: @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITES" @${FALSE} -. endif +. endif _MASTER_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endfor -. else +. endfor +. else _MASTER_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endif -.endfor -.for _S in ${PATCH_SITES} +. endif +. endfor +. for _S in ${PATCH_SITES} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} +. if !empty(_S_TEMP) +. for _group in ${_S_TEMP:S/,/ /g} _G_TEMP= ${_group} -. if ${_G_TEMP:C/[a-zA-Z0-9_]//g} +. if ${_G_TEMP:C/[a-zA-Z0-9_]//g} check-makevars:: @${ECHO_MSG} "The ${_S} PATCH_SITES line has" @${ECHO_MSG} "a group with invalid characters, only use [a-zA-Z0-9_]" @${FALSE} -. endif -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default +. endif +. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default check-makevars:: @${ECHO_MSG} "The words all, ALL and default are reserved and cannot be" @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITES" @${FALSE} -. endif +. endif _PATCH_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endfor -. else +. endfor +. else _PATCH_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endif -.endfor +. endif +. endfor # Feed internal _{MASTER,PATCH}_SITE_SUBDIR_n where n is a group designation # as per grouping rules (:something) # Organize _{MASTER,PATCH}_SITE_SUBDIR_{DEFAULT,[^/:]+} according to grouping # rules (:something) -.for _S in ${MASTER_SITE_SUBDIR} +. for _S in ${MASTER_SITE_SUBDIR} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} +. if !empty(_S_TEMP) +. for _group in ${_S_TEMP:S/,/ /g} _G_TEMP= ${_group} -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default +. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default check-makevars:: @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITE_SUBDIR" @${FALSE} -. endif -. if defined(_MASTER_SITES_${_group}) +. endif +. if defined(_MASTER_SITES_${_group}) _MASTER_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endfor -. else -. if defined(_MASTER_SITES_DEFAULT) +. endif +. endfor +. else +. if defined(_MASTER_SITES_DEFAULT) _MASTER_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endif -.endfor -.for _S in ${PATCH_SITE_SUBDIR} +. endif +. endif +. endfor +. for _S in ${PATCH_SITE_SUBDIR} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} +. if !empty(_S_TEMP) +. for _group in ${_S_TEMP:S/,/ /g} _G_TEMP= ${_group} -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default +. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default check-makevars:: @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITE_SUBDIR" @${FALSE} -. endif -. if defined(_PATCH_SITES_${_group}) +. endif +. if defined(_PATCH_SITES_${_group}) _PATCH_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endfor -. else -. if defined(_PATCH_SITES_DEFAULT) +. endif +. endfor +. else +. if defined(_PATCH_SITES_DEFAULT) _PATCH_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endif -.endfor +. endif +. endif +. endfor # Substitute subdirectory names # XXX simpler/faster solution but not the best space wise, suggestions please -.for _S in ${MASTER_SITES} +. for _S in ${MASTER_SITES} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -. if !defined(_MASTER_SITE_SUBDIR_${_group}) +. if !empty(_S_TEMP) +. for _group in ${_S_TEMP:S/,/ /g} +. if !defined(_MASTER_SITE_SUBDIR_${_group}) MASTER_SITES_TMP= ${_MASTER_SITES_${_group}:S^%SUBDIR%/^^} -. else +. else _S_TEMP_TEMP= ${_MASTER_SITES_${_group}:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) +. if empty(_S_TEMP_TEMP) MASTER_SITES_TMP= ${_MASTER_SITES_${_group}} -. else +. else MASTER_SITES_TMP= -. for site in ${_MASTER_SITES_${_group}} +. for site in ${_MASTER_SITES_${_group}} _S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) +. if empty(_S_TEMP_TEMP) MASTER_SITES_TMP+= ${site} -. else -. for dir in ${_MASTER_SITE_SUBDIR_${_group}} +. else +. for dir in ${_MASTER_SITE_SUBDIR_${_group}} MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -. endif +. endfor +. endif +. endfor +. endif +. endif _MASTER_SITES_${_group}:= ${MASTER_SITES_TMP} -. endfor -. endif -.endfor -.if defined(_MASTER_SITE_SUBDIR_DEFAULT) +. endfor +. endif +. endfor +. if defined(_MASTER_SITE_SUBDIR_DEFAULT) _S_TEMP= ${_MASTER_SITES_DEFAULT:M*%SUBDIR%/*} -. if empty(_S_TEMP) +. if empty(_S_TEMP) MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT} -. else +. else MASTER_SITES_TMP= -. for site in ${_MASTER_SITES_DEFAULT} +. for site in ${_MASTER_SITES_DEFAULT} _S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) +. if empty(_S_TEMP_TEMP) MASTER_SITES_TMP+= ${site} -. else -. for dir in ${_MASTER_SITE_SUBDIR_DEFAULT} +. else +. for dir in ${_MASTER_SITE_SUBDIR_DEFAULT} MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -.else +. endfor +. endif +. endfor +. endif +. else MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT:S^%SUBDIR%/^^} -.endif +. endif _MASTER_SITES_DEFAULT:= ${MASTER_SITES_TMP} MASTER_SITES_TMP= -.for _S in ${PATCH_SITES} +. for _S in ${PATCH_SITES} _S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -. if !defined(_PATCH_SITE_SUBDIR_${_group}) +. if !empty(_S_TEMP) +. for _group in ${_S_TEMP:S/,/ /g} +. if !defined(_PATCH_SITE_SUBDIR_${_group}) PATCH_SITES_TMP= ${_PATCH_SITES_${_group}:S^%SUBDIR%/^^} -. else +. else _S_TEMP_TEMP= ${_PATCH_SITES_${_group}:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) +. if empty(_S_TEMP_TEMP) PATCH_SITES_TMP= ${_PATCH_SITES_${_group}} -. else +. else PATCH_SITES_TMP= -. for site in ${_PATCH_SITES_${_group}} +. for site in ${_PATCH_SITES_${_group}} _S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) +. if empty(_S_TEMP_TEMP) PATCH_SITES_TMP+= ${site} -. else -. for dir in ${_PATCH_SITE_SUBDIR_${_group}} +. else +. for dir in ${_PATCH_SITE_SUBDIR_${_group}} PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -. endif +. endfor +. endif +. endfor +. endif +. endif _PATCH_SITES_${_group}:= ${PATCH_SITES_TMP} -. endfor -. endif -.endfor -.if defined(_PATCH_SITE_SUBDIR_DEFAULT) +. endfor +. endif +. endfor +. if defined(_PATCH_SITE_SUBDIR_DEFAULT) _S_TEMP= ${_PATCH_SITES_DEFAULT:M*%SUBDIR%/*} -. if empty(_S_TEMP) +. if empty(_S_TEMP) PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT} -. else +. else PATCH_SITES_TMP= -. for site in ${_PATCH_SITES_DEFAULT} +. for site in ${_PATCH_SITES_DEFAULT} _S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) +. if empty(_S_TEMP_TEMP) PATCH_SITES_TMP+= ${site} -. else -. for dir in ${_PATCH_SITE_SUBDIR_DEFAULT} +. else +. for dir in ${_PATCH_SITE_SUBDIR_DEFAULT} PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -.else +. endfor +. endif +. endfor +. endif +. else PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT:S^%SUBDIR%/^^} -.endif +. endif _PATCH_SITES_DEFAULT:= ${PATCH_SITES_TMP} PATCH_SITES_TMP= @@ -2501,13 +2459,13 @@ MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:S^\${DIST_SUBDIR}/^^} # If the user has MASTER_SITE_FREEBSD set, go to the FreeBSD repository # for everything, but don't search it twice by appending it to the end. -.if defined(MASTER_SITE_FREEBSD) +. if defined(MASTER_SITE_FREEBSD) _MASTER_SITE_OVERRIDE:= ${MASTER_SITE_BACKUP} _MASTER_SITE_BACKUP:= # empty -.else +. else _MASTER_SITE_OVERRIDE= ${MASTER_SITE_OVERRIDE} _MASTER_SITE_BACKUP= ${MASTER_SITE_BACKUP} -.endif +. endif # Organize DISTFILES, PATCHFILES, _MASTER_SITES_ALL, _PATCH_SITES_ALL # according to grouping rules (:something) @@ -2515,47 +2473,47 @@ DISTFILES?= ${DISTNAME}${EXTRACT_SUFX} _MASTER_SITES_ALL= ${_MASTER_SITES_DEFAULT} _PATCH_SITES_ALL= ${_PATCH_SITES_DEFAULT} _G_TEMP= DEFAULT -.for _D in ${DISTFILES} +. for _D in ${DISTFILES} _D_TEMP= ${_D:S/^${_D:C/:[^:]+$//}//} -. if !empty(_D_TEMP) -. for _group in ${_D_TEMP:S/^://:S/,/ /g} -. if !defined(_MASTER_SITES_${_group}) +. if !empty(_D_TEMP) +. for _group in ${_D_TEMP:S/^://:S/,/ /g} +. if !defined(_MASTER_SITES_${_group}) _G_TEMP_TEMP= ${_G_TEMP:M/${_group}/} -. if empty(_G_TEMP_TEMP) +. if empty(_G_TEMP_TEMP) _G_TEMP+= ${_group} _MASTER_SITES_ALL+= ${_MASTER_SITES_${_group}} -. endif -. endif -. endfor +. endif +. endif +. endfor _DISTFILES+= ${_D:C/:[^:]+$//} -. else +. else _DISTFILES+= ${_D} -. endif -.endfor +. endif +. endfor _G_TEMP= DEFAULT -.for _P in ${PATCHFILES} +. for _P in ${PATCHFILES} _P_TEMP= ${_P:C/:[^-:][^:]*$//} _P_groups= ${_P:S/^${_P:C/:[^:]+$//}//:S/^://} _P_file= ${_P_TEMP:C/:-[^:]+$//} _P_strip= ${_P_TEMP:S/^${_P_TEMP:C/:-[^:]*$//}//:S/^://} -. if !empty(_P_groups) -. for _group in ${_P_groups:S/,/ /g} -. if !defined(_PATCH_SITES_${_group}) +. if !empty(_P_groups) +. for _group in ${_P_groups:S/,/ /g} +. if !defined(_PATCH_SITES_${_group}) _G_TEMP_TEMP= ${_G_TEMP:M/${_group}/} -. if empty(_G_TEMP_TEMP) +. if empty(_G_TEMP_TEMP) _G_TEMP+= ${_group} _PATCH_SITES_ALL+= ${_PATCH_SITES_${_group}} -. endif -. endif -. endfor -. endif +. endif +. endif +. endfor +. endif _PATCHFILES:= ${_PATCHFILES} ${_P_file} -. if empty(_P_strip) +. if empty(_P_strip) _PATCHFILES2:= ${_PATCHFILES2} ${_P_file} -. else +. else _PATCHFILES2:= ${_PATCHFILES2} ${_P_file}:${_P_strip} -. endif -.endfor +. endif +. endfor _P_groups= _P_file= _P_strip= @@ -2571,65 +2529,65 @@ MASTER_SORT_REGEX?= MASTER_SORT_REGEX+= ${MASTER_SORT:S|.|\\.|g:S|^|://[^/]*|:S|$|/|} MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S|\\|\\\\|g}"; } -.for srt in ${MASTER_SORT_REGEX} +. for srt in ${MASTER_SORT_REGEX} MASTER_SORT_AWK+= /${srt:S|/|\\/|g}/ { good["${srt:S|\\|\\\\|g}"] = good["${srt:S|\\|\\\\|g}"] " " $$0 ; next; } -.endfor +. endfor MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; } # # Hackery to enable simple fetch targets with several dynamic MASTER_SITES # _MASTER_SITES_ENV= _MASTER_SITES_DEFAULT=${_MASTER_SITES_DEFAULT:Q} -.for _F in ${DISTFILES} +. for _F in ${DISTFILES} _F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://} -. if !empty(_F_TEMP) -. for _group in ${_F_TEMP:S/,/ /g} -. if defined(_MASTER_SITES_${_group}) +. if !empty(_F_TEMP) +. for _group in ${_F_TEMP:S/,/ /g} +. if defined(_MASTER_SITES_${_group}) _MASTER_SITES_ENV+= _MASTER_SITES_${_group}=${_MASTER_SITES_${_group}:Q} -. endif -. endfor -. endif -.endfor +. endif +. endfor +. endif +. endfor _PATCH_SITES_ENV= _PATCH_SITES_DEFAULT=${_PATCH_SITES_DEFAULT:Q} -.for _F in ${PATCHFILES} +. for _F in ${PATCHFILES} _F_TEMP= ${_F:S/^${_F:C/:[^-:][^:]*$//}//:S/^://} -. if !empty(_F_TEMP) -. for _group in ${_F_TEMP:S/,/ /g} -. if defined(_PATCH_SITES_${_group}) +. if !empty(_F_TEMP) +. for _group in ${_F_TEMP:S/,/ /g} +. if defined(_PATCH_SITES_${_group}) _PATCH_SITES_ENV+= _PATCH_SITES_${_group}=${_PATCH_SITES_${_group}:Q} -. endif -. endfor -. endif -.endfor +. endif +. endfor +. endif +. endfor CKSUMFILES= ${ALLFILES} # List of all files, with ${DIST_SUBDIR} in front. Used for checksum. -.if defined(DIST_SUBDIR) -.if defined(CKSUMFILES) && ${CKSUMFILES}!="" +. if defined(DIST_SUBDIR) +. if defined(CKSUMFILES) && ${CKSUMFILES}!="" _CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//} -.endif -.else +. endif +. else _CKSUMFILES?= ${CKSUMFILES} -.endif +. endif # This is what is actually going to be extracted, and is overridable # by user. EXTRACT_ONLY?= ${_DISTFILES} -.if !target(maintainer) +. if !target(maintainer) maintainer: @${ECHO_CMD} "${MAINTAINER}" -.endif +. endif -.if !defined(CATEGORIES) +. if !defined(CATEGORIES) check-categories: @${ECHO_MSG} "${PKGNAME}: Makefile error: CATEGORIES is mandatory." @${FALSE} -.else +. else VALID_CATEGORIES+= accessibility afterstep arabic archivers astro audio \ - benchmarks biology cad chinese comms converters \ + benchmarks biology budgie cad chinese comms converters \ databases deskutils devel dns docs \ editors education elisp emulators enlightenment finance french ftp \ games geography german gnome gnustep graphics \ @@ -2647,34 +2605,96 @@ VALID_CATEGORIES+= accessibility afterstep arabic archivers astro audio \ x11-toolkits x11-wm xfce zope base check-categories: -.for cat in ${CATEGORIES} -. if empty(VALID_CATEGORIES:M${cat}) +. for cat in ${CATEGORIES} +. if empty(VALID_CATEGORIES:M${cat}) @${ECHO_MSG} "${PKGNAME}: Makefile error: category ${cat} not in list of valid categories."; \ ${FALSE}; -. endif -.endfor -.endif +. endif +. endfor +. endif PKGREPOSITORYSUBDIR?= All PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR} -.if exists(${PACKAGES}) -PACKAGES:= ${PACKAGES:S/:/\:/g} -_HAVE_PACKAGES= yes -PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX} -PKGOLDFILE?= ${PKGREPOSITORY}/${PKGNAME}.${PKG_COMPRESSION_FORMAT} -.else -PKGFILE?= ${.CURDIR}/${PKGNAME}${PKG_SUFX} -.endif -WRKDIR_PKGFILE= ${WRKDIR}/pkg/${PKGNAME}${PKG_SUFX} # The "latest version" link -- ${PKGNAME} minus everthing after the last '-' PKGLATESTREPOSITORY?= ${PACKAGES}/Latest PKGBASE?= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX} PKGLATESTFILE= ${PKGLATESTREPOSITORY}/${PKGBASE}${PKG_SUFX} +. if ${PKG_COMPRESSION_FORMAT} == txz PKGOLDLATESTFILE= ${PKGLATESTREPOSITORY}/${PKGBASE}.${PKG_COMPRESSION_FORMAT} # Temporary workaround to be deleted once every supported version of FreeBSD # have a bootstrap which handles the pkg extension. PKGOLDSIGFILE= ${PKGLATESTREPOSITORY}/${PKGBASE}.${PKG_COMPRESSION_FORMAT}.sig +. endif + + +_PKGS= ${PKGBASE} +PORTS_FEATURES+= SUBPACKAGES +. if defined(SUBPACKAGES) +. if ${SUBPACKAGES:Mmain} +DEV_ERROR+= "SUBPACKAGES cannot contain 'main', it is a reserved value" +. endif +. for sp in ${SUBPACKAGES} +. if ${sp:C/[[:lower:][:digit:]_]//g} +_BAD_SUBPACKAGES_NAMES+= ${sp} +. endif +. endfor +. if !empty(_BAD_SUBPACKAGES_NAMES) +DEV_ERROR+= "SUBPACKAGES cannot subpackages that are not all [a-z0-9_]: ${_BAD_SUBPACKAGES_NAMES}" +. endif +. endif +. for sp in ${SUBPACKAGES} +# If a FRAMEWORK generated package needs to override its subpackage package name +# it can do it with this mechanism +. if !defined(_PKGS.${sp}) +_PKGS.${sp}= ${PKGBASE}-${sp} +. endif +_PKGS+= ${_PKGS.${sp}} +PKGBASE.${sp}= ${_PKGS.${sp}} +_SP.${_PKGS.${sp}}=.${sp} +. endfor + +. if !defined(_DID_SUBPACKAGES_HELPERS) +_DID_SUBPACKAGES_HELPERS= yes +_SUBPACKAGE_HELPERS_FILE= DESCR PKGINSTALL PKGDEINSTALL PKGMESSAGE \ + PKGPREINSTALL PKGPOSTINSTALL PKGPREDEINSTALL PKGPOSTDEINSTALL \ + PKGPREUPGRADE PKGPOSTUPGRADE PKGUPGRADE + +. for sp in ${SUBPACKAGES} +# These overwrite the current value +. for v in ${_SUBPACKAGE_HELPERS_FILE} +${v}.${sp}?= ${$v}.${sp} +. endfor +_PKGMESSAGES.${sp}= ${PKGMESSAGE}.${sp} +. if !exists(${DESCR.${sp}}) && ${sp} != debuginfo +DESCR.${sp}= ${DESCR} +DEV_WARNING+= "DESCR.${sp} needs to point to an existing file." +. endif +COMMENT.${sp}?= ${COMMENT} (subpkg: ${sp}) +. endfor +. endif + +. if exists(${PACKAGES}) +PACKAGES:= ${PACKAGES:S/:/\:/g} +_HAVE_PACKAGES= yes +_PKGDIR= ${PKGREPOSITORY} +. else +_PKGDIR= ${.CURDIR} +. endif +. for sp in ${_PKGS} +PKGNAME${_SP.${sp}}= ${sp}-${PKGVERSION} +PKGNAMES+= ${PKGNAME${_SP.${sp}}} +PKGFILE${_SP.${sp}}= ${_PKGDIR}/${PKGNAME${_SP.${sp}}}${PKG_SUFX} +. endfor +_EXTRA_PACKAGE_TARGET_DEP+= ${_PKGDIR} +. for sp in ${_PKGS} +WRKDIR_PKGFILE${_SP.${sp}}= ${WRKDIR}/pkg/${PKGNAME${_SP.${sp}}}${PKG_SUFX} +. endfor + +# Integrate with the license auditing framework +. if !defined (DISABLE_LICENSES) +.include "${PORTSDIR}/Mk/bsd.licenses.mk" +. endif CONFIGURE_SCRIPT?= configure CONFIGURE_CMD?= ./${CONFIGURE_SCRIPT} @@ -2686,19 +2706,19 @@ CONFIGURE_LOG?= config.log CONFIGURE_FAIL_MESSAGE?= "Please report the problem to ${MAINTAINER} [maintainer] and attach the \"${CONFIGURE_WRKSRC}/${CONFIGURE_LOG}\" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. a ${PKG_INFO} -Ea)." CONFIG_SITE?= ${PORTSDIR}/Templates/config.site -.if defined(GNU_CONFIGURE) +. if defined(GNU_CONFIGURE) # Maximum command line length -.if !defined(CONFIGURE_MAX_CMD_LEN) +. if !defined(CONFIGURE_MAX_CMD_LEN) CONFIGURE_MAX_CMD_LEN!= ${SYSCTL} -n kern.argmax -.endif +. endif _EXPORTED_VARS+= CONFIGURE_MAX_CMD_LEN GNU_CONFIGURE_PREFIX?= ${PREFIX} -GNU_CONFIGURE_MANPREFIX?= ${MANPREFIX} +GNU_CONFIGURE_MANPREFIX?= ${PREFIX}/share CONFIGURE_ARGS+= --prefix=${GNU_CONFIGURE_PREFIX} $${_LATE_CONFIGURE_ARGS} -.if defined(CROSS_TOOLCHAIN) +. if defined(CROSS_TOOLCHAIN) CROSS_HOST= ${ARCH:S/amd64/x86_64/}-unknown-${OPSYS:tl}${OSREL} CONFIGURE_ARGS+= --host=${CROSS_HOST} -.endif +. endif CONFIGURE_ENV+= CONFIG_SITE=${CONFIG_SITE} lt_cv_sys_max_cmd_len=${CONFIGURE_MAX_CMD_LEN} HAS_CONFIGURE= yes @@ -2725,7 +2745,7 @@ SET_LATE_CONFIGURE_ARGS= \ else \ _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} ${CONFIGURE_TARGET}" ; \ fi ; -.endif +. endif # Passed to most of script invocations SCRIPTS_ENV+= CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \ @@ -2733,40 +2753,28 @@ SCRIPTS_ENV+= CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \ SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \ PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} -.if defined(BATCH) +. if defined(BATCH) SCRIPTS_ENV+= BATCH=yes -.endif +. endif -.if ${PREFIX} == /usr -MANPREFIX?= /usr/share -.else -MANPREFIX?= ${PREFIX} MANDIRS+= ${PREFIX}/share/man -.endif - -MANDIRS+= ${MANPREFIX}/man -.for sect in 1 2 3 4 5 6 7 8 9 -MAN${sect}PREFIX?= ${MANPREFIX} -.endfor -MANLPREFIX?= ${MANPREFIX} -MANNPREFIX?= ${MANPREFIX} INFO_PATH?= share/info -.if defined(INFO) +. if defined(INFO) RUN_DEPENDS+= indexinfo:print/indexinfo -. for D in ${INFO:H} +. for D in ${INFO:H} RD:= ${D} -. if ${RD} != "." -. if !defined(INFO_SUBDIR) +. if ${RD} != "." +. if !defined(INFO_SUBDIR) INFO_SUBDIR:= ${RD} -. elif ${INFO_SUBDIR} != ${RD} +. elif ${INFO_SUBDIR} != ${RD} BROKEN= only one subdirectory in INFO is allowed -. endif -. endif +. endif +. endif .undef RD -. endfor -.endif +. endfor +. endif DOCSDIR_REL?= ${DOCSDIR:S,^${PREFIX}/,,} EXAMPLESDIR_REL?= ${EXAMPLESDIR:S,^${PREFIX}/,,} @@ -2808,170 +2816,166 @@ DESKTOPDIR?= ${PREFIX}/share/applications ################################################################ # Check the machine architectures -.if defined(ONLY_FOR_ARCHS) -.for __ARCH in ${ONLY_FOR_ARCHS} -.if ${ARCH:M${__ARCH}} != "" +. if defined(ONLY_FOR_ARCHS) +. for __ARCH in ${ONLY_FOR_ARCHS} +. if ${ARCH:M${__ARCH}} != "" __ARCH_OK?= 1 -.endif -.endfor -.else +. endif +. endfor +. else __ARCH_OK?= 1 -.endif +. endif -.if defined(NOT_FOR_ARCHS) -.for __NARCH in ${NOT_FOR_ARCHS} -.if ${ARCH:M${__NARCH}} != "" +. if defined(NOT_FOR_ARCHS) +. for __NARCH in ${NOT_FOR_ARCHS} +. if ${ARCH:M${__NARCH}} != "" .undef __ARCH_OK -.endif -.endfor -.endif +. endif +. endfor +. endif -.if !defined(__ARCH_OK) -.if defined(ONLY_FOR_ARCHS) +. if !defined(__ARCH_OK) +. if defined(ONLY_FOR_ARCHS) IGNORE= is only for ${ONLY_FOR_ARCHS:O}, -.else # defined(NOT_FOR_ARCHS) +. else # defined(NOT_FOR_ARCHS) IGNORE= does not run on ${NOT_FOR_ARCHS:O}, -.endif +. endif IGNORE+= while you are running ${ARCH} -.if defined(ONLY_FOR_ARCHS_REASON_${ARCH}) +. if defined(ONLY_FOR_ARCHS_REASON_${ARCH}) IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON_${ARCH}}) -.elif defined(ONLY_FOR_ARCHS_REASON) +. elif defined(ONLY_FOR_ARCHS_REASON) IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON}) -.endif +. endif -.if defined(NOT_FOR_ARCHS_REASON_${ARCH}) +. if defined(NOT_FOR_ARCHS_REASON_${ARCH}) IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON_${ARCH}}) -.elif defined(NOT_FOR_ARCHS_REASON) +. elif defined(NOT_FOR_ARCHS_REASON) IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON}) -.endif +. endif -.endif +. endif # Check the user interaction and legal issues -.if !defined(NO_IGNORE) -.if (defined(IS_INTERACTIVE) && defined(BATCH)) +. if !defined(NO_IGNORE) +. for v in ${OSREL} ${OSREL:R} +. for f in ${FLAVOR} +. if defined($f_IGNORE_${OPSYS}_${v}) +IGNORE+= "${${f}_IGNORE_${OPSYS}_${v}}" +. endif +. endfor +. endfor +. if (defined(IS_INTERACTIVE) && defined(BATCH)) IGNORE= is an interactive port -.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE)) +. elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE)) IGNORE= is not an interactive port -.elif (defined(NO_CDROM) && defined(FOR_CDROM)) +. elif (defined(NO_CDROM) && defined(FOR_CDROM)) IGNORE= may not be placed on a CDROM: ${NO_CDROM} -.elif (defined(RESTRICTED) && defined(NO_RESTRICTED)) +. elif (defined(RESTRICTED) && defined(NO_RESTRICTED)) IGNORE= is restricted: ${RESTRICTED} -.elif (defined(NO_PACKAGE) && defined(PACKAGE_BUILDING)) +. elif (defined(NO_PACKAGE) && defined(PACKAGE_BUILDING)) IGNORE= may not be packaged: ${NO_PACKAGE} -.elif defined(IGNORE_${ARCH}) +. elif defined(IGNORE_${ARCH}) IGNORE= ${IGNORE_${ARCH}} -.elif defined(IGNORE_${OPSYS}_${OSREL:R}_${ARCH}) +. elif defined(IGNORE_${OPSYS}_${OSREL:R}_${ARCH}) IGNORE= ${IGNORE_${OPSYS}_${OSREL:R}_${ARCH}} -.elif defined(IGNORE_${OPSYS}_${OSREL:R}) +. elif defined(IGNORE_${OPSYS}_${OSREL:R}) IGNORE= ${IGNORE_${OPSYS}_${OSREL:R}} -.elif defined(IGNORE_${OPSYS}) +. elif defined(IGNORE_${OPSYS}) IGNORE= ${IGNORE_${OPSYS}} -.elif defined(BROKEN) -.if !defined(TRYBROKEN) +. elif defined(BROKEN) +. if !defined(TRYBROKEN) IGNORE= is marked as broken: ${BROKEN} -.endif -.elif defined(BROKEN_${ARCH}) -.if !defined(TRYBROKEN) +. endif +. elif defined(BROKEN_${ARCH}) +. if !defined(TRYBROKEN) IGNORE= is marked as broken on ${ARCH}: ${BROKEN_${ARCH}} -.endif -.elif defined(BROKEN_${OPSYS}_${OSREL:R}_${ARCH}) -.if !defined(TRYBROKEN) +. endif +. elif defined(BROKEN_${OPSYS}_${OSREL:R}_${ARCH}) +. if !defined(TRYBROKEN) IGNORE= is marked as broken on ${OPSYS} ${OSREL} ${ARCH}: ${BROKEN_${OPSYS}_${OSREL:R}_${ARCH}} -.endif -.elif defined(BROKEN_${OPSYS}_${OSREL:R}) -.if !defined(TRYBROKEN) +. endif +. elif defined(BROKEN_${OPSYS}_${OSREL:R}) +. if !defined(TRYBROKEN) IGNORE= is marked as broken on ${OPSYS} ${OSREL}: ${BROKEN_${OPSYS}_${OSREL:R}} -.endif -.elif defined(BROKEN_${OPSYS}) -.if !defined(TRYBROKEN) +. endif +. elif defined(BROKEN_${OPSYS}) +. if !defined(TRYBROKEN) IGNORE= is marked as broken on ${OPSYS}: ${BROKEN_${OPSYS}} -.endif -.elif defined(FORBIDDEN) +. endif +. elif defined(FORBIDDEN) IGNORE= is forbidden: ${FORBIDDEN} -.endif - -# Define the text to be output to LEGAL -.if defined(LEGAL_TEXT) -LEGAL= ${LEGAL_TEXT} -.elif defined(RESTRICTED) -LEGAL= ${RESTRICTED} -.elif defined(NO_CDROM) -LEGAL= ${NO_CDROM} -.elif defined(NO_PACKAGE) && ! defined(LEGAL_PACKAGE) -LEGAL= ${NO_PACKAGE} -.endif +. endif -.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING)) +. if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING)) IGNORE= has to be built manually: ${MANUAL_PACKAGE_BUILD} clean: @${IGNORECMD} -.endif +. endif -.if defined(IGNORE) -.if defined(IGNORE_SILENT) +. if defined(IGNORE) +. if defined(IGNORE_SILENT) IGNORECMD= ${DO_NADA} -.else +. else IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} "${IGNORE:Q}. | ${FMT_80} ; exit 1 -.endif +. endif _TARGETS= check-sanity fetch checksum extract patch configure all build \ install reinstall test package stage restage -.for target in ${_TARGETS} -.if !target(${target}) +. for target in ${_TARGETS} +. if !target(${target}) ${target}: @${IGNORECMD} -.if defined(INSTALLS_DEPENDS) +. if defined(INSTALLS_DEPENDS) @${FALSE} -.endif -.endif -.endfor +. endif +. endif +. endfor -.endif +. endif -.endif # !defined(NO_IGNORE) +. endif # !defined(NO_IGNORE) ignorelist: -.if defined(IGNORE) || defined(NO_PACKAGE) +. if defined(IGNORE) || defined(NO_PACKAGE) ignorelist: package-name -.endif +. endif ignorelist-verbose: -.if defined(IGNORE) +. if defined(IGNORE) @${ECHO_CMD} "${PKGNAME}|IGNORE: "${IGNORE:Q} -.elif defined(NO_PACKAGE) +. elif defined(NO_PACKAGE) @${ECHO_CMD} "${PKGNAME}|NO_PACKAGE: "${NO_PACKAGE:Q} -.endif +. endif ################################################################ # Clean directories for ftp or CDROM. ################################################################ -.if !defined(LICENSE) +. if !defined(LICENSE) -.if defined(RESTRICTED) +. if defined(RESTRICTED) clean-restricted: delete-distfiles delete-package clean-restricted-list: delete-distfiles-list delete-package-list RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES} -.else +. else clean-restricted: clean-restricted-list: -.endif +. endif -.if defined(NO_CDROM) +. if defined(NO_CDROM) clean-for-cdrom: delete-distfiles delete-package clean-for-cdrom-list: delete-distfiles-list delete-package-list RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES} -.else +. else clean-for-cdrom: clean-for-cdrom-list: -.endif +. endif -.endif # !defined(LICENSE) +. endif # !defined(LICENSE) -.if defined(ALL_HOOK) +. if defined(ALL_HOOK) all: @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \ DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \ @@ -2980,33 +2984,27 @@ all: BUILD_DEPENDS="${BUILD_DEPENDS}" RUN_DEPENDS="${RUN_DEPENDS}" \ CONFLICTS="${CONFLICTS}" \ ${ALL_HOOK} -.endif +. endif -.if !target(all) +. if !target(all) all: stage -.endif +. endif -.if !defined(DEPENDS_TARGET) -.if defined(DEPENDS_PRECLEAN) +. if !defined(DEPENDS_TARGET) +. if defined(DEPENDS_PRECLEAN) DEPENDS_TARGET= clean DEPENDS_ARGS= NOCLEANDEPENDS=yes -.endif -.if make(reinstall) +. endif +. if make(reinstall) DEPENDS_TARGET+= reinstall -.else +. else DEPENDS_TARGET+= install -.endif -.if defined(DEPENDS_CLEAN) +. endif +. if defined(DEPENDS_CLEAN) DEPENDS_TARGET+= clean DEPENDS_ARGS+= NOCLEANDEPENDS=yes -.endif -.endif - -.if defined(USE_GITLAB) && !${USE_GITLAB:Mnodefault} && empty(GL_COMMIT_DEFAULT) -check-makevars:: - @${ECHO_MSG} "GL_COMMIT is a required 40 character hash for use USE_GITLAB" - @${FALSE} -.endif +. endif +. endif ################################################################ # @@ -3014,12 +3012,12 @@ check-makevars:: # target or not. # ################################################################ -.if ((!defined(OPTIONS_DEFINE) && !defined(OPTIONS_SINGLE) && !defined(OPTIONS_MULTI)) \ +. if ((!defined(OPTIONS_DEFINE) && !defined(OPTIONS_SINGLE) && !defined(OPTIONS_MULTI)) \ && !defined(OPTIONS_GROUP) && !defined(OPTIONS_RADIO) \ || defined(CONFIG_DONE_${PKGBASE:tu}) || \ defined(PACKAGE_BUILDING) || defined(BATCH)) _OPTIONS_OK=yes -.endif +. endif ################################################################ # The following are used to create easy dummy targets for @@ -3031,18 +3029,18 @@ _OPTIONS_OK=yes ################################################################ # Disable build -.if defined(NO_BUILD) && !target(build) +. if defined(NO_BUILD) && !target(build) build: configure @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE} -.endif +. endif # Disable package -.if defined(NO_PACKAGE) && !target(package) +. if defined(NO_PACKAGE) && !target(package) package: -.if !defined(IGNORE_SILENT) +. if !defined(IGNORE_SILENT) @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: "${NO_PACKAGE:Q}. -.endif -.endif +. endif +. endif ################################################################ # More standard targets start here. @@ -3052,17 +3050,17 @@ package: # adding pre-* or post-* targets/scripts, override these. ################################################################ -.if defined(TRYBROKEN) && defined(BROKEN) +. if defined(TRYBROKEN) && defined(BROKEN) buildanyway-message: @${ECHO_MSG} "Trying build of ${PKGNAME} even though it is marked BROKEN." -.endif +. endif # Warn user about deprecated packages. Advisory only. -.if !target(check-deprecated) +. if !target(check-deprecated) # Try and keep these messages in sync with the ones in Mk/Scripts/create-manifest.sh check-deprecated: -.if ${MAINTAINER} == "ports@FreeBSD.org" +. if ${MAINTAINER} == "ports@FreeBSD.org" @${ECHO_MSG} "===> NOTICE:" @${ECHO_MSG} @${ECHO_MSG} "The ${PORTNAME} port currently does not have a maintainer. As a result, it is" @@ -3075,27 +3073,27 @@ check-deprecated: @${ECHO_MSG} @${ECHO_MSG} "https://docs.freebsd.org/en/articles/contributing/#ports-contributing" @${ECHO_MSG} -.endif -.if defined(DEPRECATED) +. endif +. if defined(DEPRECATED) @${ECHO_MSG} "===> NOTICE:" @${ECHO_MSG} @${ECHO_MSG} "This port is deprecated; you may wish to reconsider installing it:" @${ECHO_MSG} @${ECHO_MSG} ${DEPRECATED:Q}. @${ECHO_MSG} -.if defined(EXPIRATION_DATE) +. if defined(EXPIRATION_DATE) @${ECHO_MSG} "It is scheduled to be removed on or after ${EXPIRATION_DATE}." @${ECHO_MSG} -.endif -.endif -.endif +. endif +. endif +. endif # Check if the port is listed in the vulnerability database AUDITFILE?= ${PKG_DBDIR}/vuln.xml check-vulnerable: -.if !defined(DISABLE_VULNERABILITIES) && !defined(PACKAGE_BUILDING) \ +. if !defined(DISABLE_VULNERABILITIES) && !defined(PACKAGE_BUILDING) \ && exists(${AUDITFILE}) @${SETENV} \ dp_ECHO_MSG="${ECHO_MSG}" \ @@ -3104,7 +3102,7 @@ check-vulnerable: dp_PKGNAME="${PKGNAME}" \ dp_SCRIPTSDIR="${SCRIPTSDIR}" \ ${SH} ${SCRIPTSDIR}/check-vulnerable.sh -.endif +. endif # Quote simply quote all variables, except FETCH_ENV, some ports are creative # with it, and it needs to be quoted twice to pass through the echo/eval in @@ -3128,86 +3126,106 @@ _DO_FETCH_ENV= \ dp_RANDOMIZE_SITES='${_RANDOMIZE_SITES}' \ dp_SCRIPTSDIR='${SCRIPTSDIR}' \ dp_TARGET='${.TARGET}' -.if defined(DEVELOPER) +. if defined(DEVELOPER) _DO_FETCH_ENV+= dp_DEVELOPER=yes -.else +. else _DO_FETCH_ENV+= dp_DEVELOPER= -.endif +. endif # Fetch -.if !target(do-fetch) +. if !target(do-fetch) do-fetch: -.if !empty(DISTFILES) +. if !empty(DISTFILES) @${SETENV} \ ${_DO_FETCH_ENV} ${_MASTER_SITES_ENV} \ dp_SITE_FLAVOR=MASTER \ ${SH} ${SCRIPTSDIR}/do-fetch.sh ${DISTFILES:C/.*/'&'/} -.endif -.if defined(PATCHFILES) && !empty(PATCHFILES) +. endif +. if defined(PATCHFILES) && !empty(PATCHFILES) @${SETENV} \ ${_DO_FETCH_ENV} ${_PATCH_SITES_ENV} \ dp_SITE_FLAVOR=PATCH \ ${SH} ${SCRIPTSDIR}/do-fetch.sh ${PATCHFILES:C/:-p[0-9]//:C/.*/'&'/} -.endif -.endif +. endif +. endif # # Prints out a list of files to fetch (useful to do a batch fetch) -.if !target(fetch-list) +. if !target(fetch-list) fetch-list: -.if !empty(DISTFILES) +. if !empty(DISTFILES) @${SETENV} \ ${_DO_FETCH_ENV} ${_MASTER_SITES_ENV} \ dp_SITE_FLAVOR=MASTER \ ${SH} ${SCRIPTSDIR}/do-fetch.sh ${DISTFILES:C/.*/'&'/} -.endif -.if defined(PATCHFILES) && !empty(PATCHFILES) +. endif +. if defined(PATCHFILES) && !empty(PATCHFILES) @${SETENV} \ ${_DO_FETCH_ENV} ${_PATCH_SITES_ENV} \ dp_SITE_FLAVOR=PATCH \ ${SH} ${SCRIPTSDIR}/do-fetch.sh ${PATCHFILES:C/:-p[0-9]//:C/.*/'&'/} -.endif -.endif +. endif +. endif # Used by fetch-urlall-list and fetch-url-list -.if !target(fetch-url-list-int) +. if !target(fetch-url-list-int) fetch-url-list-int: -.if !empty(DISTFILES) +. if !empty(DISTFILES) @${SETENV} \ ${_DO_FETCH_ENV} ${_MASTER_SITES_ENV} \ dp_SITE_FLAVOR=MASTER \ ${SH} ${SCRIPTSDIR}/do-fetch.sh ${DISTFILES:C/.*/'&'/} -.endif -.if defined(PATCHFILES) && !empty(PATCHFILES) +. endif +. if defined(PATCHFILES) && !empty(PATCHFILES) @${SETENV} \ ${_DO_FETCH_ENV} ${_PATCH_SITES_ENV} \ dp_SITE_FLAVOR=PATCH \ ${SH} ${SCRIPTSDIR}/do-fetch.sh ${PATCHFILES:C/:-p[0-9]//:C/.*/'&'/} -.endif -.endif +. endif +. endif + +. if !target(fetch-url-recursive-list-int) +fetch-url-recursive-list-int: fetch-url-list-int + @recursive_cmd="fetch-url-list-int"; \ + recursive_dirs="$$(${ALL-DEPENDS-FLAVORS-LIST})"; \ + ${_FLAVOR_RECURSIVE_SH} +. endif # Prints out all the URL for all the DISTFILES and PATCHFILES. -.if !target(fetch-urlall-list) +. if !target(fetch-urlall-list) fetch-urlall-list: @cd ${.CURDIR} && ${SETENV} FORCE_FETCH_ALL=yes ${MAKE} fetch-url-list-int -.endif +. endif + +. if !target(fetch-urlall-recursive-list) +fetch-urlall-recursive-list: fetch-urlall-list + @recursive_cmd="fetch-urlall-list"; \ + recursive_dirs="$$(${ALL-DEPENDS-FLAVORS-LIST})"; \ + ${_FLAVOR_RECURSIVE_SH} +. endif # Prints the URL for all the DISTFILES and PATCHFILES that are not here -.if !target(fetch-url-list) +. if !target(fetch-url-list) fetch-url-list: fetch-url-list-int -.endif +. endif +. if !target(fetch-url-recursive-list) +fetch-url-recursive-list: fetch-url-list + @recursive_cmd="fetch-url-list"; \ + recursive_dirs="$$(${ALL-DEPENDS-FLAVORS-LIST})"; \ + ${_FLAVOR_RECURSIVE_SH} +. endif # Extract clean-wrkdir: @${RM} -r ${WRKDIR} -.if !target(do-extract) +. if !target(do-extract) do-extract: ${EXTRACT_WRKDIR} @for file in ${EXTRACT_ONLY}; do \ if ! (cd ${EXTRACT_WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\ @@ -3220,11 +3238,11 @@ do-extract: ${EXTRACT_WRKDIR} ${CHMOD} -R ug-s ${WRKDIR}; \ ${CHOWN} -R 0:0 ${WRKDIR}; \ fi -.endif +. endif # Patch -.if !target(do-patch) +. if !target(do-patch) do-patch: @${SETENV} \ dp_BZCAT="${BZCAT}" \ @@ -3250,12 +3268,12 @@ do-patch: dp_UNZIP_NATIVE_CMD="${UNZIP_NATIVE_CMD}" \ dp_XZCAT="${XZCAT}" \ ${SH} ${SCRIPTSDIR}/do-patch.sh -.endif +. endif -.if !target(run-autotools-fixup) +. if !target(run-autotools-fixup) run-autotools-fixup: # Work around an issue where FreeBSD 10.0 is detected as FreeBSD 1.x. -.if !defined(WITHOUT_FBSD10_FIX) +. if !defined(WITHOUT_FBSD10_FIX) -@for f in `${FIND} ${WRKDIR} -type f \( -name config.libpath -o \ -name config.rpath -o -name configure -o -name libtool.m4 -o \ -name ltconfig -o -name libtool -o -name aclocal.m4 -o \ @@ -3272,18 +3290,18 @@ run-autotools-fixup: ${TOUCH} ${TOUCH_FLAGS} -mr $${f}.fbsd10bak $${f} ; \ ${RM} $${f}.fbsd10bak ; \ done -.endif -.endif +. endif +. endif # Configure -.if !target(do-configure) +. if !target(do-configure) do-configure: @if [ -f ${SCRIPTDIR}/configure ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ ${SCRIPTDIR}/configure; \ fi -.if defined(GNU_CONFIGURE) +. if defined(GNU_CONFIGURE) @CONFIG_GUESS_DIRS=$$(${FIND} ${WRKDIR} -name config.guess -o -name config.sub \ | ${XARGS} -n 1 ${DIRNAME}); \ for _D in $${CONFIG_GUESS_DIRS}; do \ @@ -3294,12 +3312,12 @@ do-configure: ${CP} ${TEMPLATES}/config.sub $${_D}/config.sub; \ ${CHMOD} a+rx $${_D}/config.sub; \ done -.endif -.if defined(HAS_CONFIGURE) +. endif +. if defined(HAS_CONFIGURE) @${MKDIR} ${CONFIGURE_WRKSRC} @(cd ${CONFIGURE_WRKSRC} && \ ${SET_LATE_CONFIGURE_ARGS} \ - if ! ${SETENV} CC="${CC}" CPP="${CPP}" CXX="${CXX}" \ + if ! ${SETENVI} ${WRK_ENV} CC="${CC}" CPP="${CPP}" CXX="${CXX}" \ CFLAGS="${CFLAGS}" CPPFLAGS="${CPPFLAGS}" CXXFLAGS="${CXXFLAGS}" \ LDFLAGS="${LDFLAGS}" LIBS="${LIBS}" \ INSTALL="/usr/bin/install -c" \ @@ -3312,12 +3330,13 @@ do-configure: (${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT_80} ; \ ${FALSE}; \ fi) -.endif -.endif +. endif +. endif # Build -DO_MAKE_BUILD?= ${SETENV} ${MAKE_ENV} ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS:N${DESTDIRNAME}=*} -.if !target(do-build) +DO_MAKE_BUILD?= ${SETENVI} ${WRK_ENV} ${MAKE_ENV} ${MAKE_CMD} ${MAKE_FLAGS} \ + ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS:N${DESTDIRNAME}=*} +. if !target(do-build) do-build: @(cd ${BUILD_WRKSRC}; if ! ${DO_MAKE_BUILD} ${ALL_TARGET}; then \ if [ -n "${BUILD_FAIL_MESSAGE}" ] ; then \ @@ -3326,24 +3345,18 @@ do-build: fi; \ ${FALSE}; \ fi) -.endif +. endif # Check conflicts -.if !target(check-conflicts) +. if !target(check-conflicts) check-conflicts: check-build-conflicts check-install-conflicts -.endif +. endif -.if !target(check-build-conflicts) +. if !target(check-build-conflicts) check-build-conflicts: -.if ( defined(CONFLICTS) || defined(CONFLICTS_BUILD) ) && !defined(DISABLE_CONFLICTS) && !defined(DEFER_CONFLICTS_CHECK) - @conflicts_with=$$( \ - { ${PKG_QUERY} -g "%n-%v %p %o" ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} 2>/dev/null || : ; } \ - | while read pkgname prfx orgn; do \ - if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ - ${ECHO_CMD} -n " $${pkgname}"; \ - fi; \ - done); \ +. if ( defined(CONFLICTS) || defined(CONFLICTS_BUILD) ) && !defined(DISABLE_CONFLICTS) && !defined(DEFER_CONFLICTS_CHECK) + @conflicts_with=$$(${PKG_QUERY} -ge "%n != ${PKGBASE}" "%n-%v" ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} 2>/dev/null || : ; ) ; \ if [ -n "$${conflicts_with}" ]; then \ ${ECHO_MSG}; \ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ @@ -3355,19 +3368,14 @@ check-build-conflicts: ${ECHO_MSG} " Please remove them first with pkg delete."; \ exit 1;\ fi -.endif -.endif +. endif +. endif -.if !target(identify-install-conflicts) +. if !target(identify-install-conflicts) +CONFLICT_WARNING_WAIT?= 10 identify-install-conflicts: -.if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) ) && !defined(DISABLE_CONFLICTS) - @conflicts_with=$$( \ - { ${PKG_QUERY} -g "%n-%v %p %o" ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null || : ; } \ - | while read pkgname prfx orgn; do \ - if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ - ${ECHO_CMD} -n " $${pkgname}"; \ - fi; \ - done); \ +. if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) ) && !defined(DISABLE_CONFLICTS) + @conflicts_with=$$(${PKG_QUERY} -ge "%n != ${PKGBASE}" "%n-%v" ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null || : ; ) ; \ if [ -n "$${conflicts_with}" ]; then \ ${ECHO_MSG}; \ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ @@ -3377,22 +3385,16 @@ identify-install-conflicts: ${ECHO_MSG}; \ ${ECHO_MSG} " They install files into the same place."; \ ${ECHO_MSG} " You may want to stop build with Ctrl + C."; \ - sleep 10; \ + sleep ${CONFLICT_WARNING_WAIT}; \ fi -.endif -.endif +. endif +. endif -.if !target(check-install-conflicts) +. if !target(check-install-conflicts) check-install-conflicts: -.if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) || ( defined(CONFLICTS_BUILD) && defined(DEFER_CONFLICTS_CHECK) ) ) && !defined(DISABLE_CONFLICTS) -.if defined(DEFER_CONFLICTS_CHECK) - @conflicts_with=$$( \ - { ${PKG_QUERY} -g "%n-%v %p %o" ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null || : ; } \ - | while read pkgname prfx orgn; do \ - if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ - ${ECHO_CMD} -n " $${pkgname}"; \ - fi; \ - done); \ +. if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) || ( defined(CONFLICTS_BUILD) && defined(DEFER_CONFLICTS_CHECK) ) ) && !defined(DISABLE_CONFLICTS) +. if defined(DEFER_CONFLICTS_CHECK) + @conflicts_with=$$(${PKG_QUERY} -ge "%n != ${PKGBASE}" "%n-%v" ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null || : ; ) ; \ if [ -n "$${conflicts_with}" ]; then \ ${ECHO_MSG}; \ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ @@ -3403,14 +3405,8 @@ check-install-conflicts: ${ECHO_MSG} " Please remove them first with pkg delete."; \ exit 1; \ fi -.else - @conflicts_with=$$( \ - { ${PKG_QUERY} -g "%n-%v %p %o" ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null || : ; } \ - | while read pkgname prfx orgn; do \ - if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ - ${ECHO_CMD} -n " $${pkgname}"; \ - fi; \ - done); \ +. else + @conflicts_with=$$(${PKG_QUERY} -ge "%n != ${PKGBASE}" "%n-%v" ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null || : ; ) ; \ if [ -n "$${conflicts_with}" ]; then \ ${ECHO_MSG}; \ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ @@ -3422,21 +3418,23 @@ check-install-conflicts: ${ECHO_MSG} " Please remove them first with pkg delete."; \ exit 1; \ fi -.endif # defined(DEFER_CONFLICTS_CHECK) -.endif -.endif +. endif # defined(DEFER_CONFLICTS_CHECK) +. endif +. endif # Install -.if !target(do-install) && !defined(NO_INSTALL) +. if !target(do-install) && !defined(NO_INSTALL) do-install: - @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${FAKEROOT} ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET}) -.endif + @(cd ${INSTALL_WRKSRC} && ${SETENVI} ${WRK_ENV} ${MAKE_ENV} ${FAKEROOT} \ + ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET}) +. endif # Test -.if !target(do-test) && defined(TEST_TARGET) -DO_MAKE_TEST?= ${SETENV} ${TEST_ENV} ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${TEST_ARGS:N${DESTDIRNAME}=*} +. if !target(do-test) && defined(TEST_TARGET) +DO_MAKE_TEST?= ${SETENVI} ${WRK_ENV} ${TEST_ENV} ${MAKE_CMD} ${MAKE_FLAGS} \ + ${MAKEFILE} ${TEST_ARGS:N${DESTDIRNAME}=*} do-test: @(cd ${TEST_WRKSRC}; if ! ${DO_MAKE_TEST} ${TEST_TARGET}; then \ if [ -n "${TEST_FAIL_MESSAGE}" ] ; then \ @@ -3445,107 +3443,119 @@ do-test: fi; \ ${FALSE}; \ fi) -.endif +. endif # Package -.if defined(_HAVE_PACKAGES) +. if defined(_HAVE_PACKAGES) _EXTRA_PACKAGE_TARGET_DEP+= ${PKGFILE} _PORTS_DIRECTORIES+= ${PKGREPOSITORY} -${PKGFILE}: ${WRKDIR_PKGFILE} ${PKGREPOSITORY} - @${LN} -f ${WRKDIR_PKGFILE} ${PKGFILE} 2>/dev/null \ - || ${CP} -f ${WRKDIR_PKGFILE} ${PKGFILE} - -.if !defined(_PKG_TRANSITIONING_TO_NEW_EXT) -_EXTRA_PACKAGE_TARGET_DEP+= ${PKGOLDFILE} -${PKGOLDFILE}: ${PKGFILE} - ${INSTALL} -l rs ${PKGFILE} ${PKGOLDFILE} -.endif - -. if ${PKGORIGIN} == "ports-mgmt/pkg" || ${PKGORIGIN} == "ports-mgmt/pkg-devel" +. if ${PKGORIGIN} == "ports-mgmt/pkg" || ${PKGORIGIN} == "ports-mgmt/pkg-devel" _EXTRA_PACKAGE_TARGET_DEP+= ${PKGLATESTREPOSITORY} _PORTS_DIRECTORIES+= ${PKGLATESTREPOSITORY} _EXTRA_PACKAGE_TARGET_DEP+= ${PKGLATESTFILE} - ${PKGLATESTFILE}: ${PKGFILE} ${PKGLATESTREPOSITORY} ${INSTALL} -l rs ${PKGFILE} ${PKGLATESTFILE} -.if !defined(_PKG_TRANSITIONING_TO_NEW_EXT) +. if !defined(_PKG_TRANSITIONING_TO_NEW_EXT) && ${PKG_COMPRESSION_FORMAT} == txz _EXTRA_PACKAGE_TARGET_DEP+= ${PKGOLDLATESTFILE} ${PKGOLDSIGFILE} -${PKGOLDLATESTFILE}: ${PKGOLDFILE} ${PKGLATESTREPOSITORY} - ${INSTALL} -l rs ${PKGOLDFILE} ${PKGOLDLATESTFILE} +${PKGOLDLATESTFILE}: ${PKGFILE} ${PKGLATESTREPOSITORY} + ${INSTALL} -l rs ${PKGFILE} ${PKGOLDLATESTFILE} # Temporary workaround to be deleted once every supported version of FreeBSD # have a bootstrap which handles the pkg extension. ${PKGOLDSIGFILE}: ${PKGLATESTREPOSITORY} ${INSTALL} -l rs pkg.pkg.sig ${PKGOLDSIGFILE} -.endif -. endif +. endif +. endif -.endif +. endif # from here this will become a loop for subpackages -${WRKDIR_PKGFILE}: ${TMPPLIST} create-manifest ${WRKDIR}/pkg - @if ! ${SETENV} ${PKG_ENV} FORCE_POST="${_FORCE_POST_PATTERNS}" ${PKG_CREATE} ${PKG_CREATE_ARGS} -m ${METADIR} -p ${TMPPLIST} -o ${WRKDIR}/pkg ${PKGNAME}; then \ +. for sp in ${_PKGS} +${_PLIST}.${sp}: ${TMPPLIST} + @if [ "${PKGBASE}" = "${sp}" ]; then \ + ${SED} "/^@comment /d; /@@/d" ${TMPPLIST} > ${.TARGET} ; \ + else \ + ${SED} -n "s/@@${sp:S/${PKGBASE}-//}@@//p" ${TMPPLIST} > ${.TARGET} ; \ + fi + +${WRKDIR_PKGFILE${_SP.${sp}}}: ${_PLIST}.${sp} create-manifest ${WRKDIR}/pkg + @echo "===> Building ${PKGNAME${_SP.${sp}}}" + @if ! ${SETENV} ${PKG_ENV} ${PKG_CREATE} ${PKG_CREATE_ARGS} -m ${METADIR}.${sp} -p ${_PLIST}.${sp} -o ${WRKDIR}/pkg ${PKGNAME}; then \ cd ${.CURDIR} && eval ${MAKE} delete-package >/dev/null; \ exit 1; \ fi - # -# Temporary will be later dynamically added per subpackages -_EXTRA_PACKAGE_TARGET_DEP+= ${WRKDIR_PKGFILE} + +_EXTRA_PACKAGE_TARGET_DEP+= ${WRKDIR_PKGFILE${_SP.${sp}}} + +. if defined(_HAVE_PACKAGES) +${PKGFILE${_SP.${sp}}}: ${WRKDIR_PKGFILE${_SP.${sp}}} + @${LN} -f ${WRKDIR_PKGFILE${_SP.${sp}}} ${PKGFILE${_SP.${sp}}} 2>/dev/null \ + || ${CP} -f ${WRKDIR_PKGFILE${_SP.${sp}}} ${PKGFILE${_SP.${sp}}} + +_EXTRA_PACKAGE_TARGET_DEP+= ${PKGFILE${_SP.${sp}}} +. endif +. endfor # This will be the end of the loop -.if !target(do-package) +. if !target(do-package) PKG_CREATE_ARGS+= -f ${PKG_COMPRESSION_FORMAT} -.if defined(PKG_COMPRESSION_LEVEL) +. if defined(PKG_COMPRESSION_LEVEL) PKG_CREATE_ARGS+= -l ${PKG_COMPRESSION_LEVEL} -.endif +. endif PKG_CREATE_ARGS+= -r ${STAGEDIR} -. if defined(PKG_CREATE_VERBOSE) +. if defined(PKG_CREATE_VERBOSE) PKG_CREATE_ARGS+= -v -. endif +. endif do-package: ${_EXTRA_PACKAGE_TARGET_DEP} ${WRKDIR}/pkg -.endif +. endif -.if !target(delete-package) +. if !target(delete-package) delete-package: - @${ECHO_MSG} "===> Deleting package for ${PKGNAME}" +. for sp in ${_PKGS} + @${ECHO_MSG} "===> Deleting package for ${sp}" # When staging, the package may only be in the workdir if not root - @${RM} ${PKGFILE} ${WRKDIR_PKGFILE} 2>/dev/null || : -.endif + @${RM} ${PKGFILE${_SP.${sp}}} ${WRKDIR_PKGFILE${_SP.${sp}}} 2>/dev/null || : +. endfor +. endif -.if !target(delete-package-list) +. if !target(delete-package-list) delete-package-list: - @${ECHO_CMD} "[ -f ${PKGFILE} ] && (${ECHO_CMD} deleting ${PKGFILE}; ${RM} ${PKGFILE})" -.endif +. for sp in ${_PKGS} + @${ECHO_CMD} "[ -f ${PKGFILE${_SP.${sp}}} ] && (${ECHO_CMD} deleting ${PKGFILE${_SP.${sp}}}; ${RM} ${PKGFILE${_SP.${sp}}})" +. endfor +. endif # Used by scripts and users to install a package from local repository. # Poudriere -i uses this, please keep. -.if !target(install-package) -.if defined(FORCE_PKG_REGISTER) +. if !target(install-package) +. if defined(FORCE_PKG_REGISTER) _INSTALL_PKG_ARGS= -f -.endif -.if defined(INSTALLS_DEPENDS) +. endif +. if defined(INSTALLS_DEPENDS) _INSTALL_PKG_ARGS+= -A -.endif -install-package: - @if [ -f "${WRKDIR}/pkg/${PKGNAME}${PKG_SUFX}" ]; then \ - _pkgfile="${WRKDIR_PKGFILE}"; \ +. endif +. for sp in ${_PKGS} +install-package: install-package.${sp} +install-package.${sp}: + @if [ -f "${WRKDIR_PKGFILE${_SP.${sp}}}" ]; then \ + _pkgfile="${WRKDIR_PKGFILE${_SP.${sp}}}"; \ else \ - _pkgfile="${PKGFILE}"; \ + _pkgfile="${PKGFILE${_SP.${sp}}}"; \ fi; \ ${PKG_ADD} ${_INSTALL_PKG_ARGS} $${_pkgfile} -.endif - +. endfor +. endif # Utility targets follow -.if !target(check-already-installed) -.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) +. if !target(check-already-installed) +. if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) check-already-installed: @${ECHO_MSG} "===> Checking if ${PKGBASE} is already installed"; \ pkgname=`${PKG_INFO} -q -O ${PKGBASE}`; \ @@ -3563,75 +3573,79 @@ check-already-installed: ${ECHO_MSG} " in your environment or the \"make install\" command line."; \ exit 1; \ fi -.endif -.endif +. endif +. endif -.if !target(check-umask) +. if !target(check-umask) check-umask: @if [ `${SH} -c umask` != 0022 ]; then \ ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \ ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \ ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \ fi -.endif +. endif # Needed for poudriere wait for at least a year before removing # XXX 2017-04-09 -.if !target(install-mtree) +. if !target(install-mtree) install-mtree: -.endif +. endif -.if !target(install-ldconfig-file) +. if !target(install-ldconfig-file) install-ldconfig-file: -. if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) -. if defined(USE_LDCONFIG) -. if !defined(USE_LINUX_PREFIX) -. if ${USE_LDCONFIG} != "${LOCALBASE}/lib" && !defined(INSTALL_AS_USER) +. if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) +. if defined(USE_LDCONFIG) +. if !defined(USE_LINUX_PREFIX) +. if ${USE_LDCONFIG} != "${LOCALBASE}/lib" && !defined(INSTALL_AS_USER) @${ECHO_MSG} "===> Installing ldconfig configuration file" -. if defined(NO_MTREE) || ${PREFIX} != ${LOCALBASE} +. if defined(NO_MTREE) || ${PREFIX} != ${LOCALBASE} @${MKDIR} ${STAGEDIR}${LOCALBASE}/${LDCONFIG_DIR} -. endif +. endif @${ECHO_CMD} ${USE_LDCONFIG} | ${TR} ' ' '\n' \ > ${STAGEDIR}${LOCALBASE}/${LDCONFIG_DIR}/${PKGBASE} @${ECHO_CMD} ${LOCALBASE}/${LDCONFIG_DIR}/${PKGBASE} >> ${TMPPLIST} -. if ${PREFIX} != ${LOCALBASE} +. if ${PREFIX} != ${LOCALBASE} @${ECHO_CMD} "@dir ${LOCALBASE}/${LDCONFIG_DIR}" >> ${TMPPLIST} +. endif +. endif . endif . endif -. endif -. endif -. if defined(USE_LDCONFIG32) -. if !defined(INSTALL_AS_USER) +. if defined(USE_LDCONFIG32) +. if !defined(INSTALL_AS_USER) @${ECHO_MSG} "===> Installing 32-bit ldconfig configuration file" -. if defined(NO_MTREE) || ${PREFIX} != ${LOCALBASE} +. if defined(NO_MTREE) || ${PREFIX} != ${LOCALBASE} @${MKDIR} ${STAGEDIR}${LOCALBASE}/${LDCONFIG32_DIR} -. endif +. endif @${ECHO_CMD} ${USE_LDCONFIG32} | ${TR} ' ' '\n' \ > ${STAGEDIR}${LOCALBASE}/${LDCONFIG32_DIR}/${PKGBASE} @${ECHO_CMD} ${LOCALBASE}/${LDCONFIG32_DIR}/${PKGBASE} >> ${TMPPLIST} -. if ${PREFIX} != ${LOCALBASE} +. if ${PREFIX} != ${LOCALBASE} @${ECHO_CMD} "@dir ${LOCALBASE}/${LDCONFIG32_DIR}" >> ${TMPPLIST} +. endif +. endif . endif . endif . endif -. endif -.endif -.if !defined(USE_LINUX_PREFIX) -. if !target(fixup-lib-pkgconfig) +. if !defined(USE_LINUX_PREFIX) +. if !target(fixup-lib-pkgconfig) fixup-lib-pkgconfig: @if [ -d ${STAGEDIR}${PREFIX}/lib/pkgconfig ]; then \ if [ -z "$$(${FIND} ${STAGEDIR}${PREFIX}/lib/pkgconfig -maxdepth 0 -empty)" ]; then \ + if [ -n "${DEVELOPER:Dyes}" ]; then \ + ${ECHO_MSG} "===> File(s) found in lib/pkgconfig while correct path is libdata/pkgconfig"; \ + ${ECHO_MSG} " Applying fix but consider using USES= pathfix or adjust install path"; \ + fi; \ ${MKDIR} ${STAGEDIR}${PREFIX}/libdata/pkgconfig; \ ${MV} ${STAGEDIR}${PREFIX}/lib/pkgconfig/* ${STAGEDIR}${PREFIX}/libdata/pkgconfig; \ fi; \ ${RMDIR} ${STAGEDIR}${PREFIX}/lib/pkgconfig; \ fi -. endif -.endif +. endif +. endif -.if !target(create-users-groups) -.if defined(GROUPS) || defined(USERS) +. if !target(create-users-groups) +. if defined(GROUPS) || defined(USERS) _UG_INSTALL= ${WRKDIR}/users-groups-install.sh _UG_DEINSTALL= ${WRKDIR}/users-groups-deinstall.sh PKGPREINSTALL+= ${_UG_INSTALL} @@ -3654,11 +3668,13 @@ create-users-groups: dp_UID_OFFSET="${UID_OFFSET}" \ dp_USERS_BLACKLIST="${USERS_BLACKLIST}" \ ${SH} ${SCRIPTSDIR}/do-users-groups.sh "${USERS}" "${GROUPS}" -.endif -.endif +. endif +. endif -.if !defined(DISABLE_SECURITY_CHECK) -.if !target(security-check) +_WWW= ${WWW:[1]} + +. if !defined(DISABLE_SECURITY_CHECK) +. if !target(security-check) security-check: ${TMPPLIST} # Scan PLIST for: # 1. setugid files @@ -3689,19 +3705,18 @@ security-check: ${TMPPLIST} ! ${AWK} -v audit="$${PORTS_AUDIT}" -f ${SCRIPTSDIR}/security-check.awk \ ${WRKDIR}/.PLIST.flattened ${WRKDIR}/.PLIST.readelf ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable; \ then \ - www_site=$$(cd ${.CURDIR} && ${MAKE} www-site); \ - if [ ! -z "$${www_site}" ]; then \ + if [ ! -z "${_WWW}" ]; then \ ${ECHO_MSG}; \ ${ECHO_MSG} " For more information, and contact details about the security"; \ ${ECHO_MSG} " status of this software, see the following webpage: "; \ - ${ECHO_MSG} "$${www_site}"; \ + ${ECHO_MSG} "${_WWW}"; \ fi; \ fi -.endif -.else # i.e. defined(DISABLE_SECURITY_CHECK) +. endif +. else # i.e. defined(DISABLE_SECURITY_CHECK) security-check: @${ECHO_MSG} " WARNING: Security check has been disabled." -.endif # !defined(DISABLE_SECURITY_CHECK) +. endif # !defined(DISABLE_SECURITY_CHECK) ################################################################ # Skeleton targets start here @@ -3727,35 +3742,34 @@ install-message: test-message: @${ECHO_MSG} "===> Testing for ${PKGNAME}" package-message: - @${ECHO_MSG} "===> Building package for ${PKGNAME}" + @${ECHO_MSG} "===> Building packages for ${PKGNAME}" # Empty pre-* and post-* targets -.if exists(${SCRIPTDIR}) -.for stage in pre post -.for name in pkg check-sanity fetch extract patch configure build stage install package +. if exists(${SCRIPTDIR}) +. for stage in pre post +. for name in pkg check-sanity fetch extract patch configure build stage install package -.if !target(${stage}-${name}-script) -.if exists(${SCRIPTDIR}/${stage}-${name}) +. if !target(${stage}-${name}-script) +. if exists(${SCRIPTDIR}/${stage}-${name}) ${stage}-${name}-script: @ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ ${SCRIPTDIR}/${.TARGET:S/-script$//} -.endif -.endif +. endif +. endif -.endfor -.endfor -.endif +. endfor +. endfor +. endif -.if !target(pretty-print-www-site) +. if !target(pretty-print-www-site) pretty-print-www-site: - @www_site=$$(cd ${.CURDIR} && ${MAKE} www-site); \ - if [ -n "$${www_site}" ]; then \ + @if [ -n "${_WWW}" ]; then \ ${ECHO_MSG} -n " and/or visit the "; \ - ${ECHO_MSG} -n "<a href=\"$${www_site}\">web site</a>"; \ + ${ECHO_MSG} -n "<a href=\"${_WWW}\">web site</a>"; \ ${ECHO_MSG} " for further information"; \ fi -.endif +. endif ################################################################ # Some more targets supplied for users' convenience @@ -3765,63 +3779,65 @@ pretty-print-www-site: # # Special target to verify patches -.if !target(checkpatch) +. if !target(checkpatch) checkpatch: @cd ${.CURDIR} && ${MAKE} ${PATCH_SILENT} PATCH_CHECK_ONLY=yes ${_PATCH_DEP} ${_PATCH_REAL_SEQ} -.endif +. endif # Reinstall # # Special target to re-run install -.if !target(reinstall) +. if !target(reinstall) reinstall: @${RM} ${INSTALL_COOKIE} ${PACKAGE_COOKIE} @cd ${.CURDIR} && DEPENDS_TARGET="${DEPENDS_TARGET}" ${MAKE} deinstall install -.endif +. endif -.if !target(restage) +. if !target(restage) restage: @${RM} -r ${STAGEDIR} ${STAGE_COOKIE} ${INSTALL_COOKIE} ${PACKAGE_COOKIE} @cd ${.CURDIR} && ${MAKE} stage -.endif +. endif # Deinstall # # Special target to remove installation -.if !target(deinstall) +. if !target(deinstall) deinstall: -.if defined(UID) && ${UID} != 0 && !defined(INSTALL_AS_USER) +. if defined(UID) && ${UID} != 0 && !defined(INSTALL_AS_USER) @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target" @cd ${.CURDIR} && \ ${SU_CMD} "${MAKE} ${.TARGET}" @${ECHO_MSG} "===> Returning to user credentials" -.else - @${ECHO_MSG} "===> Deinstalling for ${PKGBASE}" - @if ${PKG_INFO} -e ${PKGBASE}; then \ - p=`${PKG_INFO} -q -O ${PKGBASE}`; \ +. else +. for _sp in ${_PKGS} + @${ECHO_MSG} "===> Deinstalling for ${_sp}" + @if ${PKG_INFO} -e ${_sp}; then \ + p=`${PKG_INFO} -q -O ${_sp}`; \ ${ECHO_MSG} "===> Deinstalling $${p}"; \ - ${PKG_DELETE} -f ${PKGBASE} ; \ + ${PKG_DELETE} -f ${_sp} ; \ else \ - ${ECHO_MSG} "===> ${PKGBASE} not installed, skipping"; \ + ${ECHO_MSG} "===> ${_sp} not installed, skipping"; \ fi +. endfor @${RM} ${INSTALL_COOKIE} ${PACKAGE_COOKIE} -.endif -.endif +. endif +. endif # Deinstall-all # # Special target to remove installation of all ports of the same origin -.if !target(deinstall-all) +. if !target(deinstall-all) deinstall-all: -.if ${UID} != 0 && !defined(INSTALL_AS_USER) +. if ${UID} != 0 && !defined(INSTALL_AS_USER) @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target" @cd ${.CURDIR} && \ ${SU_CMD} "${MAKE} ${.TARGET}" @${ECHO_MSG} "===> Returning to user credentials" -.else +. else @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}" @deinstall_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \ for oldpkgorigin in $$(${GREP} "|${PKGORIGIN}|" ${PORTSDIR}/MOVED | ${CUT} -f 1 -d '|' | ${SORT} -u); do \ @@ -3836,12 +3852,12 @@ deinstall-all: ${ECHO_MSG} "===> ${PKGORIGIN} not installed, skipping"; \ fi; \ ${RM} ${INSTALL_COOKIE} ${PACKAGE_COOKIE} -.endif -.endif +. endif +. endif # Cleaning up -.if !target(do-clean) +. if !target(do-clean) do-clean: @if [ -d ${WRKDIR} ]; then \ if [ -w ${WRKDIR} ]; then \ @@ -3850,73 +3866,73 @@ do-clean: ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \ fi; \ fi -.endif +. endif -.if !target(clean) +. if !target(clean) pre-clean: clean-msg clean-msg: @${ECHO_MSG} "===> Cleaning for ${PKGNAME}" -.if empty(FLAVORS) +. if empty(FLAVORS) CLEAN_DEPENDENCIES= -.if !defined(NOCLEANDEPENDS) +. if !defined(NOCLEANDEPENDS) CLEAN_DEPENDENCIES+= limited-clean-depends-noflavor limited-clean-depends-noflavor: @cd ${.CURDIR} && ${MAKE} limited-clean-depends -.endif -.if target(pre-clean) +. endif +. if target(pre-clean) CLEAN_DEPENDENCIES+= pre-clean-noflavor pre-clean-noflavor: @cd ${.CURDIR} && ${SETENV} ${MAKE} pre-clean -.endif +. endif CLEAN_DEPENDENCIES+= do-clean-noflavor do-clean-noflavor: @cd ${.CURDIR} && ${SETENV} ${MAKE} do-clean -.if target(post-clean) +. if target(post-clean) CLEAN_DEPENDENCIES+= post-clean-noflavor post-clean-noflavor: @cd ${.CURDIR} && ${SETENV} ${MAKE} post-clean -.endif +. endif .ORDER: ${CLEAN_DEPENDENCIES} clean: ${CLEAN_DEPENDENCIES} -.endif +. endif -.if !empty(_FLAVOR) +. if !empty(_FLAVOR) _CLEANFLAVORS= ${_FLAVOR} -.else +. else _CLEANFLAVORS= ${FLAVORS} -.endif -.for _f in ${_CLEANFLAVORS} +. endif +. for _f in ${_CLEANFLAVORS} CLEAN_DEPENDENCIES= -.if !defined(NOCLEANDEPENDS) +. if !defined(NOCLEANDEPENDS) CLEAN_DEPENDENCIES+= limited-clean-depends-${_f} limited-clean-depends-${_f}: @cd ${.CURDIR} && ${SETENV} FLAVOR=${_f} ${MAKE} limited-clean-depends -.endif -.if target(pre-clean) +. endif +. if target(pre-clean) CLEAN_DEPENDENCIES+= pre-clean-${_f} pre-clean-${_f}: @cd ${.CURDIR} && ${SETENV} FLAVOR=${_f} ${MAKE} pre-clean -.endif +. endif CLEAN_DEPENDENCIES+= do-clean-${_f} do-clean-${_f}: @cd ${.CURDIR} && ${SETENV} FLAVOR=${_f} ${MAKE} do-clean -.if target(post-clean) +. if target(post-clean) CLEAN_DEPENDENCIES+= post-clean-${_f} post-clean-${_f}: @cd ${.CURDIR} && ${SETENV} FLAVOR=${_f} ${MAKE} post-clean -.endif +. endif .ORDER: ${CLEAN_DEPENDENCIES} clean: ${CLEAN_DEPENDENCIES} -.endfor -.endif +. endfor +. endif -.if !target(distclean) +. if !target(distclean) distclean: clean @cd ${.CURDIR} && ${MAKE} delete-distfiles RESTRICTED_FILES="${_DISTFILES:Q} ${_PATCHFILES:Q}" -.endif +. endif -.if !target(delete-distfiles) +. if !target(delete-distfiles) delete-distfiles: @${ECHO_MSG} "===> Deleting distfiles for ${PKGNAME}" @(if [ "X${RESTRICTED_FILES}" != "X" -a -d ${_DISTDIR} ]; then \ @@ -3929,12 +3945,12 @@ delete-distfiles: fi; \ done; \ fi) -.if defined(DIST_SUBDIR) +. if defined(DIST_SUBDIR) -@${RMDIR} ${_DISTDIR} >/dev/null 2>&1 || ${TRUE} -.endif -.endif +. endif +. endif -.if !target(delete-distfiles-list) +. if !target(delete-distfiles-list) delete-distfiles-list: @${ECHO_CMD} "# ${PKGNAME}" @if [ "X${RESTRICTED_FILES}" != "X" ]; then \ @@ -3946,23 +3962,10 @@ delete-distfiles-list: fi; \ done; \ fi -.if defined(DIST_SUBDIR) +. if defined(DIST_SUBDIR) @${ECHO_CMD} "${RMDIR} ${_DISTDIR} 2>/dev/null || ${TRUE}" -.endif -.endif - -# Generates patches. - -update-patches: - @toedit=`PATCH_WRKSRC=${PATCH_WRKSRC} \ - PATCHDIR=${PATCHDIR} \ - PATCH_LIST=${PATCHDIR}/patch-* \ - DIFF_ARGS=${DIFF_ARGS} \ - DISTORIG=${DISTORIG} \ - ${SH} ${PORTSDIR}/Tools/scripts/update-patches`; \ - case $$toedit in "");; \ - *) ${ECHO_CMD} -n 'edit patches: '; read i; \ - cd ${PATCHDIR} && $${VISUAL:-$${EDIT:-/usr/bin/vi}} $$toedit;; esac +. endif +. endif # Checksumming utilities @@ -3970,7 +3973,7 @@ update-patches: _CHECKSUM_INIT_ENV= \ dp_SHA256=${SHA256} -.if !target(makesum) +. if !target(makesum) # Some port change the options with OPTIONS_*_FORCE when make(makesum) to be # able to add all distfiles in one go. # For this to work, we need to call the do-fetch script directly here so that @@ -3979,7 +3982,10 @@ _CHECKSUM_INIT_ENV= \ # checksum and sizes checks. makesum: check-sanity @cd ${.CURDIR} && ${MAKE} fetch NO_CHECKSUM=yes \ - DISABLE_SIZE=yes DISTFILES="${DISTFILES}" + DISABLE_SIZE=yes DISTFILES="${DISTFILES}" \ + MASTER_SITES="${MASTER_SITES}" \ + MASTER_SITE_SUBDIR="${MASTER_SITE_SUBDIR}" \ + PATCH_SITES="${PATCH_SITES}" @${SETENV} \ ${_CHECKSUM_INIT_ENV} \ dp_CHECKSUM_ALGORITHMS='${CHECKSUM_ALGORITHMS:tu}' \ @@ -3989,11 +3995,11 @@ makesum: check-sanity dp_ECHO_MSG='${ECHO_MSG}' \ dp_SCRIPTSDIR='${SCRIPTSDIR}' \ ${SH} ${SCRIPTSDIR}/makesum.sh ${DISTFILES:C/.*/'&'/} -.endif +. endif -.if !target(checksum) +. if !target(checksum) checksum: fetch -.if !empty(_CKSUMFILES) && !defined(NO_CHECKSUM) +. if !empty(_CKSUMFILES) && !defined(NO_CHECKSUM) @${SETENV} \ ${_CHECKSUM_INIT_ENV} \ dp_CHECKSUM_ALGORITHMS='${CHECKSUM_ALGORITHMS:tu}' \ @@ -4009,8 +4015,8 @@ checksum: fetch dp_DISABLE_SIZE='${DISABLE_SIZE}' \ dp_NO_CHECKSUM='${NO_CHECKSUM}' \ ${SH} ${SCRIPTSDIR}/checksum.sh ${_CKSUMFILES:C/.*/'&'/} -.endif -.endif +. endif +. endif # Some port's archives contains files modes that are a bit too restrictive for # some usage. For example: @@ -4030,39 +4036,42 @@ extract-fixup-modes: # Nobody should want to override this unless PKGNAME is simply bogus. -.if !target(package-name) +. if !target(package-name) package-name: @${ECHO_CMD} ${PKGNAME} -.endif +. endif # Build a package but don't check the package cookie -.if !target(repackage) +. if !target(repackage) repackage: pre-repackage package pre-repackage: - @${RM} ${PACKAGE_COOKIE} -.endif + @${RM} ${PACKAGE_COOKIE} ${TMPPLIST}* +. endif # Build a package but don't check the cookie for installation, also don't # install package cookie -.if !target(package-noinstall) +. if !target(package-noinstall) package-noinstall: package -.endif +. endif ################################################################ # Dependency checking ################################################################ -.if !target(depends) +. if !target(depends) depends: pkg-depends extract-depends patch-depends lib-depends fetch-depends build-depends run-depends -.for deptype in PKG EXTRACT PATCH FETCH BUILD LIB RUN TEST +. for deptype in PKG EXTRACT PATCH FETCH BUILD LIB RUN TEST +. for sp in ${_PKGS} +${deptype}_DEPENDS_ALL+= ${${deptype}_DEPENDS${_SP.${sp}}} +. endfor ${deptype:tl}-depends: -.if defined(${deptype}_DEPENDS) && !defined(NO_DEPENDS) +. if !empty(${deptype}_DEPENDS_ALL) && !defined(NO_DEPENDS) @${SETENV} \ - dp_RAWDEPENDS="${${deptype}_DEPENDS}" \ + dp_RAWDEPENDS="${${deptype}_DEPENDS_ALL}" \ dp_DEPTYPE="${deptype}_DEPENDS" \ dp_DEPENDS_TARGET="${DEPENDS_TARGET}" \ dp_DEPENDS_PRECLEAN="${DEPENDS_PRECLEAN}" \ @@ -4084,20 +4093,20 @@ ${deptype:tl}-depends: dp_MAKE="${MAKE}" \ dp_MAKEFLAGS='${.MAKEFLAGS}' \ ${SH} ${SCRIPTSDIR}/do-depends.sh -.endif -.endfor +. endif +. endfor -.endif +. endif # Dependency lists: both build and runtime, recursive. Print out directory names. -_UNIFIED_DEPENDS=${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} ${TEST_DEPENDS} +_UNIFIED_DEPENDS=${PKG_DEPENDS_ALL} ${EXTRACT_DEPENDS_ALL} ${PATCH_DEPENDS_ALL} ${FETCH_DEPENDS_ALL} ${BUILD_DEPENDS_ALL} ${LIB_DEPENDS_ALL} ${RUN_DEPENDS_ALL} ${TEST_DEPENDS_ALL} _DEPEND_SPECIALS= ${_UNIFIED_DEPENDS:M*\:*\:*:C,^[^:]*:([^:]*):.*$,\1,} -.for d in ${_UNIFIED_DEPENDS:M*\:/*} +. for d in ${_UNIFIED_DEPENDS:M*\:/*} _PORTSDIR_STR= $${PORTSDIR}/ DEV_WARNING+= "It looks like the ${d} depends line has an absolute port origin, make sure to remove \$${_PORTSDIR_STR} from it." -.endfor +. endfor all-depends-list: @${ALL-DEPENDS-LIST} @@ -4112,7 +4121,7 @@ _FLAVOR_RECURSIVE_SH= \ ${FALSE}; \ fi; \ for dir in $${recursive_dirs}; do \ - unset flavor; \ + unset flavor FLAVOR; \ case $${dir} in \ *@*/*) ;; \ *@*) \ @@ -4144,55 +4153,55 @@ ALL-DEPENDS-LIST= ${DEPENDS-LIST} -r ${_UNIFIED_DEPENDS:Q} ALL-DEPENDS-FLAVORS-LIST= ${DEPENDS-LIST} -f -r ${_UNIFIED_DEPENDS:Q} DEINSTALL-DEPENDS-FLAVORS-LIST= ${DEPENDS-LIST} -f -r ${_UNIFIED_DEPENDS:N${PKG_DEPENDS}:Q} MISSING-DEPENDS-LIST= ${DEPENDS-LIST} -m ${_UNIFIED_DEPENDS:Q} -BUILD-DEPENDS-LIST= ${DEPENDS-LIST} "${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" -RUN-DEPENDS-LIST= ${DEPENDS-LIST} "${LIB_DEPENDS} ${RUN_DEPENDS}" -TEST-DEPENDS-LIST= ${DEPENDS-LIST} ${TEST_DEPENDS:Q} +BUILD-DEPENDS-LIST= ${DEPENDS-LIST} "${PKG_DEPENDS_ALL} ${EXTRACT_DEPENDS_ALL} ${PATCH_DEPENDS_ALL} ${FETCH_DEPENDS_ALL} ${BUILD_DEPENDS_ALL} ${LIB_DEPENDS_ALL}" +RUN-DEPENDS-LIST= ${DEPENDS-LIST} "${LIB_DEPENDS_ALL} ${RUN_DEPENDS_ALL}" +TEST-DEPENDS-LIST= ${DEPENDS-LIST} ${TEST_DEPENDS_ALL:Q} CLEAN-DEPENDS-LIST= ${DEPENDS-LIST} -wr ${_UNIFIED_DEPENDS:Q} CLEAN-DEPENDS-LIMITED-LIST= ${DEPENDS-LIST} -w ${_UNIFIED_DEPENDS:Q} -.if !target(clean-depends) +. if !target(clean-depends) clean-depends: @for dir in $$(${CLEAN-DEPENDS-LIST}); do \ (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \ done -.endif +. endif -.if !target(limited-clean-depends) +. if !target(limited-clean-depends) limited-clean-depends: @for dir in $$(${CLEAN-DEPENDS-LIMITED-LIST}); do \ (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \ done -.endif +. endif -.if !target(deinstall-depends) +. if !target(deinstall-depends) deinstall-depends: @recursive_cmd="deinstall"; \ recursive_dirs="$$(${DEINSTALL-DEPENDS-FLAVORS-LIST})"; \ ${_FLAVOR_RECURSIVE_SH} -.endif +. endif -.if !target(fetch-specials) +. if !target(fetch-specials) fetch-specials: @${ECHO_MSG} "===> Fetching all distfiles required by ${PKGNAME} for building" @recursive_cmd="fetch"; \ recursive_dirs="${_DEPEND_SPECIALS}"; \ ${_FLAVOR_RECURSIVE_SH} -.endif +. endif -.if !target(fetch-recursive) +. if !target(fetch-recursive) fetch-recursive: @${ECHO_MSG} "===> Fetching all distfiles for ${PKGNAME} and dependencies" @recursive_cmd="fetch"; \ - recursive_dirs="${.CURDIR} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ + recursive_dirs="${.CURDIR}${FLAVOR:D@${FLAVOR}} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ ${_FLAVOR_RECURSIVE_SH} -.endif +. endif -.if !target(fetch-recursive-list) +. if !target(fetch-recursive-list) fetch-recursive-list: @recursive_cmd="fetch-list"; \ - recursive_dirs="${.CURDIR} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ + recursive_dirs="${.CURDIR}${FLAVOR:D@${FLAVOR}} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ ${_FLAVOR_RECURSIVE_SH} -.endif +. endif # Used by fetch-required and fetch-required list, this script looks # at each of the dependencies. If 3 items are specified in the tuple, @@ -4227,66 +4236,66 @@ FETCH_LIST?= for i in $$deps; do \ echo cd $$dir; cd $$dir; ${MAKE} $$targ; \ done -.if !target(fetch-required) +. if !target(fetch-required) fetch-required: fetch -.if defined(NO_DEPENDS) +. if defined(NO_DEPENDS) @${ECHO_MSG} "===> NO_DEPENDS is set, not fetching any other distfiles for ${PKGNAME}" -.else +. else @${ECHO_MSG} "===> Fetching all required distfiles for ${PKGNAME} and dependencies" -.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN -.if defined(${deptype}_DEPENDS) - @targ=fetch; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST} -.endif -.endfor -.endif +. for deptype in PKG EXTRACT PATCH FETCH BUILD RUN +. if defined(${deptype}_DEPENDS) + @targ=fetch; deps="${${deptype}_DEPENDS_ALL}"; ${FETCH_LIST} +. endif +. endfor +. endif -.endif +. endif -.if !target(fetch-required-list) +. if !target(fetch-required-list) fetch-required-list: fetch-list -.if !defined(NO_DEPENDS) -.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN -.if defined(${deptype}_DEPENDS) - @targ=fetch-list; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST} -.endif -.endfor -.endif -.endif +. if !defined(NO_DEPENDS) +. for deptype in PKG EXTRACT PATCH FETCH BUILD RUN +. if defined(${deptype}_DEPENDS) + @targ=fetch-list; deps="${${deptype}_DEPENDS_ALL}"; ${FETCH_LIST} +. endif +. endfor +. endif +. endif -.if !target(checksum-recursive) +. if !target(checksum-recursive) checksum-recursive: @${ECHO_MSG} "===> Fetching and checking checksums for ${PKGNAME} and dependencies" @recursive_cmd="checksum"; \ - recursive_dirs="${.CURDIR} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ + recursive_dirs="${.CURDIR}${FLAVOR:D@${FLAVOR}} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ ${_FLAVOR_RECURSIVE_SH} -.endif +. endif # Dependency lists: build and runtime. Print out directory names. build-depends-list: -.if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) +. if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) @${BUILD-DEPENDS-LIST} -.endif +. endif run-depends-list: -.if defined(LIB_DEPENDS) || defined(RUN_DEPENDS) +. if defined(LIB_DEPENDS) || defined(RUN_DEPENDS) @${RUN-DEPENDS-LIST} -.endif +. endif test-depends-list: -.if defined(TEST_DEPENDS) +. if defined(TEST_DEPENDS) @${TEST-DEPENDS-LIST} -.endif +. endif # Package (recursive runtime) dependency list. Print out both directory names # and package names. package-depends-list: -.if defined(CHILD_DEPENDS) || defined(LIB_DEPENDS) || defined(RUN_DEPENDS) +. if defined(CHILD_DEPENDS) || defined(LIB_DEPENDS) || defined(RUN_DEPENDS) @${PACKAGE-DEPENDS-LIST} -.endif +. endif -_LIB_RUN_DEPENDS= ${LIB_DEPENDS} ${RUN_DEPENDS} +_LIB_RUN_DEPENDS= ${LIB_DEPENDS_ALL} ${RUN_DEPENDS_ALL} PACKAGE-DEPENDS-LIST?= \ if [ "${CHILD_DEPENDS}" ]; then \ installed=$$(${PKG_INFO} -qO ${PKGORIGIN} 2>/dev/null || \ @@ -4305,6 +4314,11 @@ PACKAGE-DEPENDS-LIST?= \ for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \ unset flavor; \ case $${dir} in \ + *~*) \ + dir=$${dir%~*}; \ + ;; \ + esac; \ + case $${dir} in \ *@*) \ flavor=$${dir\#*@}; \ dir=$${dir%@*}; \ @@ -4333,62 +4347,85 @@ PACKAGE-DEPENDS-LIST?= \ fi; \ done -ACTUAL-PACKAGE-DEPENDS?= \ +# FIXME: SELF_DEPENDS can only be used to depend on sub packages whose +# package name has not been overrided by the framework, otherwize the +# assumption made below that the package name is "PKGBASE-$$self" is broken. +. for sp in ${_PKGS} +ACTUAL-PACKAGE-DEPENDS${_SP.${sp}}?= \ depfiles="" ; \ - for lib in ${LIB_DEPENDS:C/\:.*//}; do \ + for lib in ${LIB_DEPENDS${_SP.${sp}}:C/\:.*//}; do \ depfiles="$$depfiles `${SETENV} LIB_DIRS="${LIB_DIRS}" LOCALBASE="${LOCALBASE}" ${SH} ${SCRIPTSDIR}/find-lib.sh $${lib}`" ; \ done ; \ - ${SETENV} PKG_BIN="${PKG_BIN}" ${SH} ${SCRIPTSDIR}/actual-package-depends.sh $${depfiles} ${RUN_DEPENDS:C/(.*)\:.*/"\1"/} + for self in ${SELF_DEPENDS${_SP.${sp}}}; do \ + if [ "$$self" = "main" ]; then \ + printf "\"%s\": {origin: \"%s\", version: \"%s\"}\n" ${PKGBASE} ${PKGORIGIN} ${PKGVERSION}; \ + else \ + printf "\"%s-%s\": {origin: \"%s\", version: \"%s\"}\n" ${PKGBASE} $$self ${PKGORIGIN} ${PKGVERSION}; \ + fi ; \ + done ; \ + ${SETENV} PKG_BIN="${PKG_BIN}" ${SH} ${SCRIPTSDIR}/actual-package-depends.sh $${depfiles} ${RUN_DEPENDS${_SP.${sp}}:C/(.*)\:.*/"\1"/} +. endfor PKG_NOTES_ENV?= -.for note in ${PKG_NOTES} +. for note in ${PKG_NOTES} PKG_NOTES_ENV+= dp_PKG_NOTE_${note}=${PKG_NOTE_${note}:Q} -.endfor +. endfor -create-manifest: +. for sp in ${_PKGS} +PKG_NOTES.${sp}= ${PKG_NOTES} +PKG_NOTES_ENV.${sp}= ${PKG_NOTES_ENV} +. if ${sp} != ${PKGBASE} +PKG_NOTES.${sp}+= subpackage +PKG_NOTES_ENV.${sp}+= dp_PKG_NOTE_subpackage=${_SP.${sp}:S/^.//1} +. endif +create-manifest: create-manifest.${sp} +create-manifest.${sp}: @${SETENV} \ dp_SCRIPTSDIR='${SCRIPTSDIR}' \ - dp_ACTUAL_PACKAGE_DEPENDS='${ACTUAL-PACKAGE-DEPENDS}' \ + dp_ACTUAL_PACKAGE_DEPENDS='${ACTUAL-PACKAGE-DEPENDS${_SP.${sp}}}' \ dp_CATEGORIES='${CATEGORIES:u:S/$/,/}' \ - dp_COMMENT=${COMMENT:Q} \ + dp_COMMENT=${COMMENT${_SP.${sp}}:Q} \ dp_COMPLETE_OPTIONS_LIST='${COMPLETE_OPTIONS_LIST}' \ dp_DEPRECATED=${DEPRECATED:Q} \ - dp_DESCR='${DESCR}' \ + dp_DESCR='${DESCR${_SP.${sp}}}' \ dp_EXPIRATION_DATE='${EXPIRATION_DATE}' \ dp_GROUPS='${GROUPS:u:S/$/,/}' \ dp_LICENSE='${LICENSE:u:S/$/,/}' \ dp_LICENSE_COMB='${LICENSE_COMB}' \ dp_MAINTAINER='${MAINTAINER}' \ - dp_METADIR='${METADIR}' \ + dp_METADIR='${METADIR}.${sp}' \ dp_NO_ARCH='${NO_ARCH}' \ - dp_PKGBASE='${PKGBASE}' \ - dp_PKGDEINSTALL='${PKGDEINSTALL}' \ - dp_PKGINSTALL='${PKGINSTALL}' \ - dp_PKGMESSAGES='${_PKGMESSAGES}' \ + dp_PKGBASE='${sp}' \ + dp_PKGDEINSTALL='${PKGDEINSTALL${_SP.${sp}}}' \ + dp_PKGINSTALL='${PKGINSTALL${_SP.${sp}}}' \ + dp_PKGMESSAGES='${_PKGMESSAGES${_SP.${sp}}}' \ dp_PKGORIGIN='${PKGORIGIN}' \ - dp_PKGPOSTDEINSTALL='${PKGPOSTDEINSTALL}' \ - dp_PKGPOSTINSTALL='${PKGPOSTINSTALL}' \ - dp_PKGPREDEINSTALL='${PKGPREDEINSTALL}' \ - dp_PKGPREINSTALL='${PKGPREINSTALL}' \ + dp_PKGPOSTDEINSTALL='${PKGPOSTDEINSTALL${_SP.${sp}}}' \ + dp_PKGPOSTINSTALL='${PKGPOSTINSTALL${_SP.${sp}}}' \ + dp_PKGPREDEINSTALL='${PKGPREDEINSTALL${_SP.${sp}}}' \ + dp_PKGPREINSTALL='${PKGPREINSTALL${_SP.${sp}}}' \ dp_PKGVERSION='${PKGVERSION}' \ dp_PKG_BIN='${PKG_BIN}' \ dp_PKG_IGNORE_DEPENDS='${PKG_IGNORE_DEPENDS}' \ - dp_PKG_NOTES='${PKG_NOTES}' \ + dp_PKG_NOTES='${PKG_NOTES.${sp}}' \ dp_PORT_OPTIONS='${PORT_OPTIONS}' \ dp_PREFIX='${PREFIX}' \ dp_USERS='${USERS:u:S/$/,/}' \ dp_WWW='${WWW}' \ - ${PKG_NOTES_ENV} \ + ${PKG_NOTES_ENV.${sp}} \ ${SH} ${SCRIPTSDIR}/create-manifest.sh - +. endfor # Print out package names. package-depends: @${PACKAGE-DEPENDS-LIST} | ${AWK} '{print $$1":"$$3}' -actual-package-depends: - @${ACTUAL-PACKAGE-DEPENDS} +. for sp in ${_PKGS} +actual-package-depends: actual-package-depends.${sp} +actual-package-depends.${sp}: + @${ACTUAL-PACKAGE-DEPENDS${_SP.${sp}}} +. endfor # Build packages for port and dependencies @@ -4434,65 +4471,118 @@ install-missing-packages: # If this ever changes, portmgr should contact the portsnap maintainer # first to avoid gratuitous breakage. -. if !target(describe) -_EXTRACT_DEPENDS=${EXTRACT_DEPENDS:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} -_PATCH_DEPENDS=${PATCH_DEPENDS:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} -_FETCH_DEPENDS=${FETCH_DEPENDS:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} -_LIB_DEPENDS=${LIB_DEPENDS:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} -_BUILD_DEPENDS=${BUILD_DEPENDS:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} ${_LIB_DEPENDS} -_RUN_DEPENDS=${RUN_DEPENDS:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} ${_LIB_DEPENDS} -. if exists(${DESCR}) +. if !target(describe) +_EXTRACT_DEPENDS=${EXTRACT_DEPENDS_ALL:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} +_PATCH_DEPENDS=${PATCH_DEPENDS_ALL:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} +_FETCH_DEPENDS=${FETCH_DEPENDS_ALL:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} +_LIB_DEPENDS=${LIB_DEPENDS_ALL:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} +_BUILD_DEPENDS=${BUILD_DEPENDS_ALL:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} ${_LIB_DEPENDS} +_RUN_DEPENDS=${RUN_DEPENDS_ALL:C/^[^ :]+:([^ :@]+)(@[^ :]+)?(:[^ :]+)?/\1/:O:u:C,(^[^/]),${PORTSDIR}/\1,} ${_LIB_DEPENDS} +. if exists(${DESCR}) _DESCR=${DESCR} -. else +. else _DESCR=/dev/null -. endif +. endif -. if defined(BUILDING_INDEX) && defined(INDEX_PORTS) +. if defined(BUILDING_INDEX) && defined(INDEX_PORTS) INDEX_OUT=${INDEX_TMPDIR}/${INDEXFILE}.desc.aggr -. else +. else INDEX_OUT=/dev/stdout -. endif +. endif -. if empty(FLAVORS) || defined(_DESCRIBE_WITH_FLAVOR) +. if empty(FLAVORS) || defined(_DESCRIBE_WITH_FLAVOR) describe: - @(${ECHO_CMD} -n "${PKGNAME}|${.CURDIR}|${PREFIX}|"; \ - ${ECHO_CMD} -n ${COMMENT:Q}; \ - ${ECHO_CMD} -n "|${_DESCR}|${MAINTAINER}|${CATEGORIES}|${_EXTRACT_DEPENDS}|${_PATCH_DEPENDS}|${_FETCH_DEPENDS}|${_BUILD_DEPENDS:O:u}|${_RUN_DEPENDS:O:u}|"; \ - while read one two discard; do \ - case "$$one" in \ - WWW:) case "$$two" in \ - https://*|http://*|ftp://*) ${ECHO_CMD} -n "$$two" ;; \ - *) ${ECHO_CMD} -n "http://$$two" ;; \ - esac; \ - break; \ - ;; \ - esac; \ - done < ${DESCR}; ${ECHO_CMD}) >>${INDEX_OUT} -. else # empty(FLAVORS) + @(${ECHO_CMD} "${PKGNAME}|${.CURDIR}|${PREFIX}|"${COMMENT:Q}"|${_DESCR}|${MAINTAINER}|${CATEGORIES}|${_EXTRACT_DEPENDS}|${_PATCH_DEPENDS}|${_FETCH_DEPENDS}|${_BUILD_DEPENDS:O:u}|${_RUN_DEPENDS:O:u}|${_WWW}" >> ${INDEX_OUT}) +. else # empty(FLAVORS) describe: ${FLAVORS:S/^/describe-/} -. for f in ${FLAVORS} +. for f in ${FLAVORS} describe-${f}: @cd ${.CURDIR} && ${SETENV} FLAVOR=${f} ${MAKE} -B -D_DESCRIBE_WITH_FLAVOR describe -. endfor -. endif # empty(FLAVORS) -. endif +. endfor +. endif # empty(FLAVORS) +. endif + +. if empty(FLAVORS) || defined(_DESCRIBE_WITH_FLAVOR) + +. if defined(_DESCRIBE_WITH_FLAVOR) +_JSON_OBJ_NAME="\"${FLAVOR}-${.CURDIR:T}\":" +. endif + +describe-json: + @(${ECHO_CMD} "${_JSON_OBJ_NAME} { ";\ + ${ECHO_CMD} \"uses\":[\"${USES:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"flavors\":[\"${FLAVORS:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"options_default\":[\"${OPTIONS_DEFAULT:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"fetch_depends\":[\"${FETCH_DEPENDS:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"extract_depends\":[\"${EXTRACT_DEPENDS:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"patch_depends\":[\"${PATCH_DEPENDS:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"build_depends\":[\"${BUILD_DEPENDS:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"lib_depends\":[\"${LIB_DEPENDS:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"run_depends\":[\"${RUN_DEPENDS:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"test_depends\":[\"${TEST_DEPENDS:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"pkg_depends\":[\"${PKG_DEPENDS:ts,:Q:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"complete_options_list\":[\"${COMPLETE_OPTIONS_LIST:ts,:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"categories\":[\"${CATEGORIES:ts,:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"license\":[\"${LICENSE:ts,:S/,/\",\"/g}\"], ;\ + ${ECHO_CMD} \"deprecated\":\""${DEPRECATED:S/"/\\\"/g:S/\\\\*/*/g:S/\\\'/'/g}" \", ;\ + ${ECHO_CMD} \"broken\":\"${BROKEN:Q:S/"/\\\"/g:S/\\\\*/*/g:S/\\\'/'/g}\", ;\ + ${ECHO_CMD} \"distversion\":\"${DISTVERSION}\", ;\ + ${ECHO_CMD} \"distversionprefix\":\"${DISTVERSIONPREFIX}\", ;\ + ${ECHO_CMD} \"distversionsuffix\":\"${DISTVERSIONSUFFIX}\", ;\ + ${ECHO_CMD} \"expiration_date\":\"${EXPIRATION_DATE}\", ;\ + ${ECHO_CMD} \"flavor\":\"${FLAVOR}\", ;\ + ${ECHO_CMD} \"gh_account\":\"${GH_ACCOUNT}\", ;\ + ${ECHO_CMD} \"gh_project\":\"${GH_PROJECT}\", ;\ + ${ECHO_CMD} \"gh_tagname\":\"${GH_TAGNAME}\", ;\ + ${ECHO_CMD} \"gl_account\":\"${GL_ACCOUNT}\", ;\ + ${ECHO_CMD} \"gl_commit\":\"${GL_COMMIT}\", ;\ + ${ECHO_CMD} \"gl_project\":\"${GL_PROJECT}\", ;\ + ${ECHO_CMD} \"gl_site\":\"${GL_SITE}\", ;\ + ${ECHO_CMD} \"maintainer\":\"${MAINTAINER}\", ;\ + ${ECHO_CMD} \"makefiles\":\"${MAKEFILES}\", ;\ + ${ECHO_CMD} \"pkgbase\":\"${PKGBASE}\", ;\ + ${ECHO_CMD} \"pkgname\":\"${PKGNAME}\", ;\ + ${ECHO_CMD} \"pkgnamesuffix\":\"${PKGNAMESUFFIX}\", ;\ + ${ECHO_CMD} \"pkgorigin\":\"${PKGORIGIN}\", ;\ + ${ECHO_CMD} \"comment\":\"${COMMENT:Q:S/"/\\\"/g:S/\\\\*/*/g:S/\\\'/'/g}\", ;\ + ${ECHO_CMD} \"portepoch\":\"${PORTEPOCH}\", ;\ + ${ECHO_CMD} \"portname\":\"${PORTNAME}\", ;\ + ${ECHO_CMD} \"portrevision\":\"${PORTREVISION}\", ;\ + ${ECHO_CMD} \"portversion\":\"${PORTVERSION}\", ;\ + ${ECHO_CMD} \"use_github\":\"${USE_GITHUB}\", ;\ + ${ECHO_CMD} \"use_gitlab\":\"${USE_GITLAB}\", ;\ + ${ECHO_CMD} \"www\":\"${WWW:Q}\" ;\ + ${ECHO_CMD} "}" >> ${INDEX_OUT}) +. else # empty(FLAVORS) +describe-json: ${FLAVORS:S/^/describe-json-/} +_LAST_FLAVOR = ${FLAVORS:[-1]} +. for f in ${FLAVORS} +describe-json-${f}: + @if [ "${f}" == "${FLAVORS:[1]}" ]; then \ + ${ECHO_CMD} "{" ;\ + fi; + @cd ${.CURDIR} && ${SETENV} FLAVOR=${f} ${MAKE} -B -D_DESCRIBE_WITH_FLAVOR describe-json + @if [ "${f}" != "${_LAST_FLAVOR}" ]; then \ + ${ECHO_MSG} "," ;\ + else \ + ${ECHO_CMD} "}" ;\ + fi; \ + +. endfor +. endif # empty(FLAVORS) www-site: -.if exists(${DESCR}) - @${AWK} '$$1 ~ /^WWW:/ {print $$2}' ${DESCR} | ${HEAD} -1 -.else - @${ECHO_CMD} -.endif + @${ECHO_CMD} ${_WWW} -.if !target(readmes) +. if !target(readmes) readmes: readme -.endif +. endif -.if !target(readme) +. if !target(readme) readme: @${RM} ${.CURDIR}/README.html @cd ${.CURDIR} && ${MAKE} ${.CURDIR}/README.html -.endif +. endif ${.CURDIR}/README.html: @${ECHO_MSG} "===> Creating README.html for ${PKGNAME}" @@ -4526,45 +4616,44 @@ _PRETTY_PRINT_DEPENDS_LIST=\ ${ECHO_MSG} "\" to $$target."; \ fi; - -.if !target(pretty-print-build-depends-list) +. if !target(pretty-print-build-depends-list) pretty-print-build-depends-list: -.if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || \ +. if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || \ defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) @${_PRETTY_PRINT_DEPENDS_LIST} -.endif -.endif +. endif +. endif -.if !target(pretty-print-run-depends-list) +. if !target(pretty-print-run-depends-list) pretty-print-run-depends-list: -.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) +. if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) @${_PRETTY_PRINT_DEPENDS_LIST} -.endif -.endif +. endif +. endif _SUB_LIST_TEMP= ${SUB_LIST:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -.if !target(apply-slist) && defined(SUB_FILES) +. if !target(apply-slist) && defined(SUB_FILES) apply-slist: -.for file in ${SUB_FILES} -.if !exists(${FILESDIR}/${file}.in) +. for file in ${SUB_FILES} +. if !exists(${FILESDIR}/${file}.in) @${ECHO_MSG} "** Missing ${FILESDIR}/${file}.in for ${PKGNAME}."; exit 1 -.else +. else @${SED} ${_SUB_LIST_TEMP} -e '/^@comment /d' ${FILESDIR}/${file}.in > ${WRKDIR}/${file} -.endif -.endfor -.for i in pkg-message pkg-install pkg-deinstall pkg-req -.if ${SUB_FILES:M${i}*}!="" +. endif +. endfor +. for i in pkg-message pkg-install pkg-deinstall pkg-req +. if ${SUB_FILES:M${i}*}!="" ${i:S/-//:tu}= ${WRKDIR}/${SUB_FILES:M${i}*} -.endif -.endfor -.endif +. endif +. endfor +. endif # Generate packing list. Also tests to make sure all required package # files exist. PLIST_SUB_SANITIZED= ${PLIST_SUB:N*_regex=*} -.if !target(generate-plist) +. if !target(generate-plist) generate-plist: ${WRKDIR} @${ECHO_MSG} "===> Generating temporary packing list" @${MKDIR} ${TMPPLIST:H} @@ -4573,77 +4662,91 @@ generate-plist: ${WRKDIR} @for file in ${PLIST_FILES}; do \ ${ECHO_CMD} $${file} | ${SED} ${PLIST_SUB_SANITIZED:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} >> ${TMPPLIST}; \ done -.if !empty(PLIST) -.for f in ${PLIST} +. for sp in ${_PKGS} +. if ${sp} != ${PKGBASE} + @for file in ${PLIST_FILES${_SP.${sp}}}; do \ + ${ECHO_CMD} $${file} | ${SED} ${PLIST_SUB_SANITIZED:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's/^/@@${_SP.${sp}:S/^.//}@@/' >> ${TMPPLIST}; \ + done +. endif +. endfor +. if !empty(PLIST) +. for f in ${PLIST} @if [ -f "${f}" ]; then \ ${SED} ${PLIST_SUB_SANITIZED:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${f} >> ${TMPPLIST}; \ for i in owner group mode; do ${ECHO_CMD} "@$$i"; done >> ${TMPPLIST}; \ fi -.endfor -.endif +. endfor +. endif -.for dir in ${PLIST_DIRS} +. for dir in ${PLIST_DIRS} @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB_SANITIZED:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dir ,' >> ${TMPPLIST} -.endfor +. endfor -.endif +. for sp in ${_PKGS} +. if ${sp} != ${PKGBASE} +. for dir in ${PLIST_DIRS${_SP.${sp}}} + @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB_SANITIZED:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@@${_SP.${sp}:S/^.//}@@@dir ,' >> ${TMPPLIST} +. endfor +. endif +. endfor +. endif ${TMPPLIST}: @cd ${.CURDIR} && ${MAKE} generate-plist -.for _type in EXAMPLES DOCS -.if !empty(_REALLY_ALL_POSSIBLE_OPTIONS:M${_type}) -.if !target(add-plist-${_type:tl}) -.if defined(PORT${_type}) && !empty(PORT_OPTIONS:M${_type}) +. for _type in EXAMPLES DOCS +. if !empty(_REALLY_ALL_POSSIBLE_OPTIONS:M${_type}) +. if !target(add-plist-${_type:tl}) +. if defined(PORT${_type}) && !empty(PORT_OPTIONS:M${_type}) add-plist-${_type:tl}: -.for x in ${PORT${_type}} +. for x in ${PORT${_type}} @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ if [ ! -e ${STAGEDIR}${${_type}DIR}/${x} ]; then \ ${ECHO_CMD} ${${_type}DIR}/${x} >> ${TMPPLIST}; \ fi;fi -.endfor +. endfor @${FIND} -P ${PORT${_type}:S/^/${STAGEDIR}${${_type}DIR}\//} ! -type d 2>/dev/null | \ ${SED} -ne 's,^${STAGEDIR},,p' >> ${TMPPLIST} -.endif -.endif -.endif -.endfor +. endif +. endif +. endif +. endfor -.if !target(add-plist-data) -.if defined(PORTDATA) +. if !target(add-plist-data) +. if defined(PORTDATA) add-plist-data: -.for x in ${PORTDATA} +. for x in ${PORTDATA} @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ if [ ! -e ${STAGEDIR}${DATADIR}/${x} ]; then \ ${ECHO_CMD} ${DATADIR}/${x} >> ${TMPPLIST}; \ fi;fi -.endfor +. endfor @${FIND} -P ${PORTDATA:S/^/${STAGEDIR}${DATADIR}\//} ! -type d 2>/dev/null | \ ${SED} -ne 's,^${STAGEDIR},,p' >> ${TMPPLIST} -.endif -.endif +. endif +. endif -.if !target(add-plist-info) -.if defined(INFO) +. if !target(add-plist-info) +. if defined(INFO) add-plist-info: -.for i in ${INFO} +. for i in ${INFO} @${LS} ${STAGEDIR}${PREFIX}/${INFO_PATH}/$i.info* | ${SED} -e s:${STAGEDIR}:@info\ :g >> ${TMPPLIST} -.endfor -.endif -.endif +. endfor +. endif +. endif # If we're installing into a non-standard PREFIX, we need to remove that directory at # deinstall-time -.if !target(add-plist-post) -.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${LINUXBASE} && \ +. if !target(add-plist-post) +. if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${LINUXBASE} && \ ${PREFIX} != "/usr" && ${PREFIX} != "/" && !defined(NO_PREFIX_RMDIR)) add-plist-post: @${ECHO_CMD} "@dir ${PREFIX}" >> ${TMPPLIST} -.endif -.endif +. endif +. endif -.if !target(install-rc-script) -.if defined(USE_RC_SUBR) +. if !target(install-rc-script) +. if defined(USE_RC_SUBR) install-rc-script: @${ECHO_MSG} "===> Staging rc.d startup script(s)" @for i in ${USE_RC_SUBR}; do \ @@ -4652,10 +4755,10 @@ install-rc-script: ${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${STAGEDIR}$${_prefix}/etc/rc.d/$${i%.sh}; \ ${ECHO_CMD} "@(root,wheel,0755) $${_prefix}/etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \ done -.endif -.endif +. endif +. endif -.if !target(check-man) +. if !target(check-man) check-man: stage @${ECHO_MSG} "====> Checking man pages (check-man)" @mdirs= ; \ @@ -4671,12 +4774,12 @@ check-man: stage done ; \ done ; \ exit $$err -.endif +. endif # Compress all manpage not already compressed which are not hardlinks # Find all manpages which are not compressed and are hardlinks, and only get the list of inodes concerned, for each of them compress the first one found and recreate the hardlinks for the others # Fixes all dead symlinks left by the previous round -.if !target(compress-man) +. if !target(compress-man) compress-man: @${ECHO_MSG} "====> Compressing man pages (compress-man)" @mdirs= ; \ @@ -4703,102 +4806,105 @@ compress-man: ${RM} $$link ; \ done; \ done -.endif +. endif -.if !target(stage-dir) +. if !target(stage-dir) stage-dir: ${STAGEDIR}${PREFIX} -.if !defined(NO_MTREE) +. if !defined(NO_MTREE) @${MTREE_CMD} ${MTREE_ARGS} ${STAGEDIR}${PREFIX} > /dev/null -.endif -.endif +. endif +. endif -.if !target(makeplist) +. if !target(makeplist) makeplist: stage @${SETENV} ${CO_ENV} ${SH} ${SCRIPTSDIR}/check-stagedir.sh makeplist -.endif +. endif -.if !target(check-plist) +. if !target(check-plist) check-plist: stage @${ECHO_MSG} "====> Checking for pkg-plist issues (check-plist)" @${SETENV} ${CO_ENV} ${SH} ${SCRIPTSDIR}/check-stagedir.sh checkplist @${ECHO_MSG} "===> No pkg-plist issues found (check-plist)" -.endif +. endif -.if !target(check-orphans) +. if !target(check-orphans) check-orphans: check-plist -.endif +. endif -.if !target(stage-qa) +. if !target(stage-qa) stage-qa: @${ECHO_MSG} "====> Running Q/A tests (stage-qa)" @${SETENV} ${QA_ENV} ${SH} ${SCRIPTSDIR}/qa.sh -.if !defined(DEVELOPER) +. if !defined(DEVELOPER) @${ECHO_MSG} "/!\\ To run stage-qa automatically add DEVELOPER=yes to your environment /!\\" -.endif -.endif +. endif +. endif pretty-flavors-package-names: .PHONY -.if empty(FLAVORS) - @${ECHO_CMD} "no flavor: ${PKGNAME}" -.else -.for f in ${FLAVORS} +. if empty(FLAVORS) + @${ECHO_CMD} "no flavor: ${PKGNAMES}" +. else +. for f in ${FLAVORS} @${ECHO_CMD} -n "${f}: " - @cd ${.CURDIR} && ${SETENV} FLAVOR=${f} ${MAKE} -B -V PKGNAME -.endfor -.endif + @cd ${.CURDIR} && ${SETENV} -i FLAVOR=${f} ${MAKE} -B -V PKGNAMES +. endfor +. endif flavors-package-names: .PHONY -.if empty(FLAVORS) - @${ECHO_CMD} "${PKGNAME}" -.else -.for f in ${FLAVORS} - @cd ${.CURDIR} && ${SETENV} FLAVOR=${f} ${MAKE} -B -V PKGNAME -.endfor -.endif +. if empty(FLAVORS) + @${ECHO_CMD} "${PKGNAMES}" | ${XARGS} -n 1 +. else +. for f in ${FLAVORS} + @cd ${.CURDIR} && ${SETENV} -i FLAVOR=${f} ${MAKE} -B -V PKGNAMES | ${XARGS} -n 1 +. endfor +. endif # Fake installation of package so that user can pkg delete it later. -.if !target(fake-pkg) +. if !target(fake-pkg) STAGE_ARGS= -i ${STAGEDIR} -.if defined(NO_PKG_REGISTER) +. if defined(NO_PKG_REGISTER) STAGE_ARGS= -N -.endif +. endif -fake-pkg: -.if defined(INSTALLS_DEPENDS) -.if !defined(NO_PKG_REGISTER) +. for sp in ${_PKGS} +fake-pkg: fake-pkg.${sp} +fake-pkg.${sp}: ${_PLIST}.${sp} +. if defined(INSTALLS_DEPENDS) +. if !defined(NO_PKG_REGISTER) @${ECHO_MSG} "===> Registering installation for ${PKGNAME} as automatic" -.endif - @${SETENV} ${PKG_ENV} FORCE_POST="${_FORCE_POST_PATTERNS}" ${PKG_REGISTER} -d ${STAGE_ARGS} -m ${METADIR} -f ${TMPPLIST} -.else -.if !defined(NO_PKG_REGISTER) +. endif + @${SETENV} ${PKG_ENV} FORCE_POST="${_FORCE_POST_PATTERNS}" ${PKG_REGISTER} -d ${STAGE_ARGS} -m ${METADIR}.${sp} -f ${_PLIST}.${sp} +. else +. if !defined(NO_PKG_REGISTER) @${ECHO_MSG} "===> Registering installation for ${PKGNAME}" -.endif - @${SETENV} ${PKG_ENV} FORCE_POST="${_FORCE_POST_PATTERNS}" ${PKG_REGISTER} ${STAGE_ARGS} -m ${METADIR} -f ${TMPPLIST} -.endif - @${RM} -r ${METADIR} -.endif +. endif + @${SETENV} ${PKG_ENV} FORCE_POST="${_FORCE_POST_PATTERNS}" ${PKG_REGISTER} ${STAGE_ARGS} -m ${METADIR}.${sp} -f ${_PLIST}.${sp} +. endif + @${RM} -r ${METADIR}.${sp} +. endfor +. endif # Depend is generally meaningless for arbitrary ports, but if someone wants # one they can override this. This is just to catch people who've gotten into # the habit of typing `make depend all install' as a matter of course. # Same goes for tags -.for _t in depend tags -.if !target(${_t}) +. for _t in depend tags +. if !target(${_t}) ${_t}: -.endif -.endfor +. endif +. endfor -.if !defined(NOPRECIOUSMAKEVARS) +. if !defined(NOPRECIOUSMAKEVARS) # These won't change, so we can pass them through the environment -.for var in ${_EXPORTED_VARS} -.if empty(.MAKEFLAGS:M${var}=*) && !empty(${var}) +. for var in ${_EXPORTED_VARS} +. if empty(.MAKEFLAGS:M${var}=*) && !empty(${var}) .MAKEFLAGS: ${var}=${${var}:Q} -.endif -.endfor -.endif +. endif +. endfor +. endif PORTS_ENV_VARS+= ${_EXPORTED_VARS} -.if !target(pre-check-config) +. if !target(pre-check-config) pre-check-config: _CHECK_OPTIONS_NAMES= OPTIONS_DEFINE OPTIONS_GROUP OPTIONS_MULTI \ OPTIONS_RADIO OPTIONS_SINGLE @@ -4806,135 +4912,135 @@ _CHECK_OPTIONS_NAMES+= ${OPTIONS_GROUP:S/^/OPTIONS_GROUP_/} _CHECK_OPTIONS_NAMES+= ${OPTIONS_MULTI:S/^/OPTIONS_MULTI_/} _CHECK_OPTIONS_NAMES+= ${OPTIONS_RADIO:S/^/OPTIONS_RADIO_/} _CHECK_OPTIONS_NAMES+= ${OPTIONS_SINGLE:S/^/OPTIONS_SINGLE_/} -.for var in ${_CHECK_OPTIONS_NAMES} -. if defined(${var}) -. for o in ${${var}} -. if ${o:C/[-_[:upper:][:digit:]]//g} +. for var in ${_CHECK_OPTIONS_NAMES} +. if defined(${var}) +. for o in ${${var}} +. if ${o:C/[-_[:upper:][:digit:]]//g} OPTIONS_BAD_NAMES+= ${o} -. endif -. endfor -. endif -.endfor -.if defined(OPTIONS_BAD_NAMES) && !empty(OPTIONS_BAD_NAMES) +. endif +. endfor +. endif +. endfor +. if defined(OPTIONS_BAD_NAMES) && !empty(OPTIONS_BAD_NAMES) DEV_WARNING+= "These options name have characters outside of [-_A-Z0-9]:" DEV_WARNING+= "${OPTIONS_BAD_NAMES:O:u}" -.endif -.for single in ${OPTIONS_SINGLE} -. for opt in ${OPTIONS_SINGLE_${single}} -. if empty(ALL_OPTIONS:M${single}) || !empty(PORT_OPTIONS:M${single}) -. if !empty(PORT_OPTIONS:M${opt}) +. endif +. for single in ${OPTIONS_SINGLE} +. for opt in ${OPTIONS_SINGLE_${single}} +. if empty(ALL_OPTIONS:M${single}) || !empty(PORT_OPTIONS:M${single}) +. if !empty(PORT_OPTIONS:M${opt}) OPTIONS_WRONG_SINGLE_${single}+= ${opt} -. if defined(OPTFOUND) +. if defined(OPTFOUND) OPTIONS_WRONG_SINGLE+= ${single} -. else +. else OPTFOUND= true -. endif -. endif -. else +. endif +. endif +. else # if conditional and if the condition is unchecked, remove opt from the list of # set options PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}} OPTNOCHECK= true -. endif -. endfor -. if !defined(OPTFOUND) && !defined(OPTNOCHECK) +. endif +. endfor +. if !defined(OPTFOUND) && !defined(OPTNOCHECK) OPTIONS_WRONG_SINGLE+= ${single} -. endif +. endif . undef OPTFOUND . undef OPTNOCHECK -.endfor +. endfor .undef single -.for radio in ${OPTIONS_RADIO} -. for opt in ${OPTIONS_RADIO_${radio}} -. if !empty(PORT_OPTIONS:M${opt}) +. for radio in ${OPTIONS_RADIO} +. for opt in ${OPTIONS_RADIO_${radio}} +. if !empty(PORT_OPTIONS:M${opt}) OPTIONS_WRONG_RADIO_${radio}+= ${opt} -. if defined(OPTFOUND) +. if defined(OPTFOUND) OPTIONS_WRONG_RADIO+= ${radio} -. else +. else OPTFOUND= true -. endif -. endif -. endfor +. endif +. endif +. endfor . undef OPTFOUND -.endfor +. endfor -.for multi in ${OPTIONS_MULTI} -. for opt in ${OPTIONS_MULTI_${multi}} -. if empty(ALL_OPTIONS:M${multi}) || !empty(PORT_OPTIONS:M${multi}) -. if !empty(PORT_OPTIONS:M${opt}) +. for multi in ${OPTIONS_MULTI} +. for opt in ${OPTIONS_MULTI_${multi}} +. if empty(ALL_OPTIONS:M${multi}) || !empty(PORT_OPTIONS:M${multi}) +. if !empty(PORT_OPTIONS:M${opt}) OPTFOUND= true -. endif -. else +. endif +. else # if conditional and if the condition is unchecked, remove opt from the list of # set options PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}} OPTNOCHECK= true -. endif -. endfor -. if !defined(OPTFOUND) && !defined(OPTNOCHECK) +. endif +. endfor +. if !defined(OPTFOUND) && !defined(OPTNOCHECK) OPTIONS_WRONG_MULTI+= ${multi} -. endif +. endif . undef OPTFOUND . undef OPTNOCHECK -.endfor +. endfor .undef multi -.for opt in ${PORT_OPTIONS} -. for conflict in ${${opt}_PREVENTS} -. if ${PORT_OPTIONS:M${conflict}} -. if empty(OPTIONS_WRONG_PREVENTS:M${opt}) +. for opt in ${PORT_OPTIONS} +. for conflict in ${${opt}_PREVENTS} +. if ${PORT_OPTIONS:M${conflict}} +. if empty(OPTIONS_WRONG_PREVENTS:M${opt}) OPTIONS_WRONG_PREVENTS+= ${opt} -. endif +. endif OPTIONS_WRONG_PREVENTS_${opt}+= ${conflict} -. endif -. endfor -.endfor +. endif +. endfor +. endfor .undef conflict .undef opt -.endif #pre-check-config +. endif #pre-check-config -.if !target(_check-config) +. if !target(_check-config) _check-config: pre-check-config -.for multi in ${OPTIONS_WRONG_MULTI} +. for multi in ${OPTIONS_WRONG_MULTI} @${ECHO_MSG} "====> You must check at least one option in the ${multi} multi" -.endfor -.for single in ${OPTIONS_WRONG_SINGLE} +. endfor +. for single in ${OPTIONS_WRONG_SINGLE} @${ECHO_MSG} "====> You must select one and only one option from the ${single} single" -.if defined(OPTIONS_WRONG_SINGLE_${single}) +. if defined(OPTIONS_WRONG_SINGLE_${single}) @${ECHO_MSG} "=====> Only one of these must be defined: ${OPTIONS_WRONG_SINGLE_${single}}" -.else +. else @${ECHO_MSG} "=====> No option was selected (and one must be)" -.endif -.endfor -.for radio in ${OPTIONS_WRONG_RADIO} +. endif +. endfor +. for radio in ${OPTIONS_WRONG_RADIO} @${ECHO_MSG} "====> You cannot select multiple options from the ${radio} radio" @${ECHO_MSG} "=====> Only one of these must be defined: ${OPTIONS_WRONG_RADIO_${radio}}" -.endfor -.if defined(OPTIONS_WRONG_PREVENTS) +. endfor +. if defined(OPTIONS_WRONG_PREVENTS) @${ECHO_MSG} "====> Two or more enabled options conflict with each other" -. for prevents in ${OPTIONS_WRONG_PREVENTS} +. for prevents in ${OPTIONS_WRONG_PREVENTS} @${ECHO_MSG} "=====> Option ${prevents} conflicts with ${OPTIONS_WRONG_PREVENTS_${prevents}} (select only one)" -. if defined(${prevents}_PREVENTS_MSG) +. if defined(${prevents}_PREVENTS_MSG) @${ECHO_MSG} "======> ${${prevents}_PREVENTS_MSG}" -. endif -. endfor -.endif -.if !empty(OPTIONS_WRONG_MULTI) || !empty(OPTIONS_WRONG_SINGLE) || !empty(OPTIONS_WRONG_RADIO) || !empty(OPTIONS_WRONG_PREVENTS) +. endif +. endfor +. endif +. if !empty(OPTIONS_WRONG_MULTI) || !empty(OPTIONS_WRONG_SINGLE) || !empty(OPTIONS_WRONG_RADIO) || !empty(OPTIONS_WRONG_PREVENTS) _CHECK_CONFIG_ERROR= true -.endif -.endif # _check-config +. endif +. endif # _check-config -.if !target(check-config) +. if !target(check-config) check-config: _check-config -.if !empty(_CHECK_CONFIG_ERROR) +. if !empty(_CHECK_CONFIG_ERROR) @${FALSE} -.endif -.endif # check-config +. endif +. endif # check-config -.if !target(sanity-config) +. if !target(sanity-config) sanity-config: _check-config -.if !empty(_CHECK_CONFIG_ERROR) +. if !empty(_CHECK_CONFIG_ERROR) @echo -n "Config is invalid. Re-edit? [Y/n] "; \ read answer; \ case $$answer in \ @@ -4942,10 +5048,10 @@ sanity-config: _check-config exit 0; \ esac; \ cd ${.CURDIR} && ${MAKE} config -.endif -.endif # sanity-config +. endif +. endif # sanity-config -.if !target(pre-config) +. if !target(pre-config) pre-config: D4P_ENV= PKGNAME="${PKGNAME}" \ PORT_OPTIONS="${PORT_OPTIONS}" \ @@ -4966,31 +5072,31 @@ D4P_ENV= PKGNAME="${PKGNAME}" \ D4PFULLSCREEN="${D4PFULLSCREEN}" \ D4PALIGNCENTER="${D4PALIGNCENTER}" \ D4PASCIILINES="${D4PASCIILINES}" -.if exists(${PKGHELP}) +. if exists(${PKGHELP}) D4P_ENV+= PKGHELP="${PKGHELP}" -.endif -.for opt in ${ALL_OPTIONS} +. endif +. for opt in ${ALL_OPTIONS} D4P_ENV+= ${opt}_DESC=""${${opt}_DESC:Q}"" -.endfor -.for otype in MULTI GROUP SINGLE RADIO -. for m in ${OPTIONS_${otype}} +. endfor +. for otype in MULTI GROUP SINGLE RADIO +. for m in ${OPTIONS_${otype}} D4P_ENV+= OPTIONS_${otype}_${m}="${OPTIONS_${otype}_${m}}" \ ${m}_DESC=""${${m}_DESC:Q}"" -. for opt in ${OPTIONS_${otype}_${m}} +. for opt in ${OPTIONS_${otype}_${m}} D4P_ENV+= ${opt}_DESC=""${${opt}_DESC:Q}"" -. endfor -. endfor -.endfor +. endfor +. endfor +. endfor .undef m .undef otype .undef opt -.endif # pre-config +. endif # pre-config -.if !target(do-config) +. if !target(do-config) do-config: -.if empty(ALL_OPTIONS) && empty(OPTIONS_SINGLE) && empty(OPTIONS_MULTI) && empty(OPTIONS_RADIO) && empty(OPTIONS_GROUP) +. if empty(ALL_OPTIONS) && empty(OPTIONS_SINGLE) && empty(OPTIONS_MULTI) && empty(OPTIONS_RADIO) && empty(OPTIONS_GROUP) @${ECHO_MSG} "===> No options to configure" -.else +. else @optionsdir=${OPTIONS_FILE:H}; \ if [ ! -w "${PORT_DBDIR}" -a "`stat -f %u ${PORT_DBDIR:H}`" = 0 ]; \ then \ @@ -5006,6 +5112,7 @@ do-config: trap "${RM} $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \ ${SETENV} ${D4P_ENV} ${SH} ${SCRIPTSDIR}/dialog4ports.sh $${TMPOPTIONSFILE} || { \ ${RM} $${TMPOPTIONSFILE}; \ + ${ECHO_CMD}; \ ${ECHO_MSG} "===> Options unchanged"; \ exit 0; \ }; \ @@ -5039,85 +5146,85 @@ do-config: fi; \ ${RM} $${TMPOPTIONSFILE} @cd ${.CURDIR} && ${MAKE} sanity-config -.endif -.endif # do-config +. endif +. endif # do-config -.if !target(config) -.if !defined(NO_DIALOG) +. if !target(config) +. if !defined(NO_DIALOG) config: pre-config do-config -.else +. else config: @${ECHO_MSG} "===> Skipping 'config' as NO_DIALOG is defined" -.endif -.endif # config +. endif +. endif # config -.if !target(config-recursive) +. if !target(config-recursive) config-recursive: @${ECHO_MSG} "===> Setting user-specified options for ${PKGNAME} and dependencies"; @recursive_cmd="config-conditional"; \ - recursive_dirs="${.CURDIR} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ + recursive_dirs="${.CURDIR}${FLAVOR:D@${FLAVOR}} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ ${_FLAVOR_RECURSIVE_SH} -.endif # config-recursive +. endif # config-recursive -.if !target(config-conditional) +. if !target(config-conditional) config-conditional: -.if !empty(NEW_OPTIONS) +. if !empty(NEW_OPTIONS) @cd ${.CURDIR} && ${MAKE} config; -.endif -.endif # config-conditional +. endif +. endif # config-conditional -.if !target(showconfig) && (make(*config*) || (!empty(.MAKEFLAGS:M-V) && !empty(.MAKEFLAGS:M*_DESC))) +. if !target(showconfig) && (make(*config*) || (!empty(.MAKEFLAGS:M-V) && !empty(.MAKEFLAGS:M*_DESC))) .include "${PORTSDIR}/Mk/bsd.options.desc.mk" MULTI_EOL= : you have to choose at least one of them SINGLE_EOL= : you have to select exactly one of them RADIO_EOL= : you can only select none or one of them showconfig: check-config -.if !empty(COMPLETE_OPTIONS_LIST) +. if !empty(COMPLETE_OPTIONS_LIST) @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME}": -.for opt in ${ALL_OPTIONS} +. for opt in ${ALL_OPTIONS} @[ -z "${PORT_OPTIONS:M${opt}}" ] || match="on" ; ${ECHO_MSG} -n " ${opt}=$${match:-off}" -. if !empty(${opt}_DESC) +. if !empty(${opt}_DESC) @${ECHO_MSG} -n ": "${${opt}_DESC:Q} -. endif +. endif @${ECHO_MSG} "" -.endfor +. endfor #multi and conditional multis -.for otype in MULTI GROUP SINGLE RADIO -. for m in ${OPTIONS_${otype}} -. if empty(${m}_DESC) +. for otype in MULTI GROUP SINGLE RADIO +. for m in ${OPTIONS_${otype}} +. if empty(${m}_DESC) @${ECHO_MSG} "====> Options available for the ${otype:tl} ${m}${${otype}_EOL}" -. else +. else @${ECHO_MSG} "====> ${${m}_DESC}${${otype}_EOL}" -. endif -. for opt in ${OPTIONS_${otype}_${m}} +. endif +. for opt in ${OPTIONS_${otype}_${m}} @[ -z "${PORT_OPTIONS:M${opt}}" ] || match="on" ; ${ECHO_MSG} -n " ${opt}=$${match:-off}" -. if !empty(${opt}_DESC) +. if !empty(${opt}_DESC) @${ECHO_MSG} -n ": "${${opt}_DESC:Q} -. endif +. endif @${ECHO_MSG} "" -. endfor -. endfor -.endfor +. endfor +. endfor +. endfor .undef otype .undef m .undef opt @${ECHO_MSG} "===> Use 'make config' to modify these settings" -.endif -.endif # showconfig +. endif +. endif # showconfig -.if !target(showconfig-recursive) +. if !target(showconfig-recursive) showconfig-recursive: @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME} and its dependencies"; @recursive_cmd="showconfig"; \ - recursive_dirs="${.CURDIR} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ + recursive_dirs="${.CURDIR}${FLAVOR:D@${FLAVOR}} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ ${_FLAVOR_RECURSIVE_SH} -.endif # showconfig-recursive +. endif # showconfig-recursive -.if !target(rmconfig) +. if !target(rmconfig) rmconfig: -.if exists(${OPTIONS_FILE}) +. if exists(${OPTIONS_FILE}) -@${ECHO_MSG} "===> Removing user-configured options for ${PKGNAME}"; \ optionsdir=${OPTIONS_FILE:H}; \ if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" -a ! -w "${OPTIONS_FILE}" ]; then \ @@ -5129,20 +5236,20 @@ rmconfig: ${RM} ${OPTIONS_FILE}; \ ${RMDIR} $${optionsdir} 2>/dev/null || return 0; \ fi -.else +. else @${ECHO_MSG} "===> No user-specified options configured for ${PKGNAME}" -.endif -.endif # rmconfig +. endif +. endif # rmconfig -.if !target(rmconfig-recursive) +. if !target(rmconfig-recursive) rmconfig-recursive: @${ECHO_MSG} "===> Removing user-specified options for ${PKGNAME} and its dependencies"; @recursive_cmd="rmconfig"; \ - recursive_dirs="${.CURDIR} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ + recursive_dirs="${.CURDIR}${FLAVOR:D@${FLAVOR}} $$(${ALL-DEPENDS-FLAVORS-LIST})"; \ ${_FLAVOR_RECURSIVE_SH} -.endif # rmconfig-recursive +. endif # rmconfig-recursive -.if !target(pretty-print-config) +. if !target(pretty-print-config) MULTI_START= [ MULTI_END= ] GROUP_START= [ @@ -5152,23 +5259,23 @@ SINGLE_END= ) RADIO_START= ( RADIO_END= ) pretty-print-config: -.for opt in ${ALL_OPTIONS} +. for opt in ${ALL_OPTIONS} @[ -z "${PORT_OPTIONS:M${opt}}" ] || match="+" ; ${ECHO_MSG} -n "$${match:--}${opt} " -.endfor -.for otype in MULTI GROUP SINGLE RADIO -. for m in ${OPTIONS_${otype}} +. endfor +. for otype in MULTI GROUP SINGLE RADIO +. for m in ${OPTIONS_${otype}} @${ECHO_MSG} -n "${m}${${otype}_START} " -. for opt in ${OPTIONS_${otype}_${m}} +. for opt in ${OPTIONS_${otype}_${m}} @[ -z "${PORT_OPTIONS:M${opt}}" ] || match="+" ; ${ECHO_MSG} -n "$${match:--}${opt} " -. endfor +. endfor @${ECHO_MSG} -n "${${otype}_END} " -. endfor -.endfor +. endfor +. endfor .undef otype .undef m .undef opt @${ECHO_MSG} "" -.endif # pretty-print-config +. endif # pretty-print-config desktop-categories: @${SETENV} \ @@ -5179,7 +5286,7 @@ desktop-categories: dp_TR="${TR}" \ ${SH} ${SCRIPTSDIR}/desktop-categories.sh -.if defined(DESKTOP_ENTRIES) +. if defined(DESKTOP_ENTRIES) check-desktop-entries: @${SETENV} \ dp_CURDIR="${.CURDIR}" \ @@ -5194,10 +5301,10 @@ check-desktop-entries: dp_VALID_DESKTOP_CATEGORIES="${VALID_DESKTOP_CATEGORIES}" \ dp_TR="${TR}" \ ${SH} ${SCRIPTSDIR}/check-desktop-entries.sh ${DESKTOP_ENTRIES} -.endif +. endif -.if !target(install-desktop-entries) -.if defined(DESKTOP_ENTRIES) +. if !target(install-desktop-entries) +. if defined(DESKTOP_ENTRIES) install-desktop-entries: @${SETENV} \ dp_CURDIR="${.CURDIR}" \ @@ -5209,83 +5316,97 @@ install-desktop-entries: dp_MAKE="${MAKE}" \ dp_SED="${SED}" \ ${SH} ${SCRIPTSDIR}/install-desktop-entries.sh ${DESKTOP_ENTRIES} -.endif -.endif +. endif +. endif -.if !empty(BINARY_ALIAS) -.if !target(create-binary-alias) +. if !empty(BINARY_ALIAS) +. if !target(create-binary-alias) create-binary-alias: ${BINARY_LINKDIR} -.for target src in ${BINARY_ALIAS:C/=/ /} +. for target src in ${BINARY_ALIAS:C/=/ /} @if srcpath=`which -- ${src}`; then \ ${RLN} $${srcpath} ${BINARY_LINKDIR}/${target}; \ else \ ${ECHO_MSG} "===> Missing \"${src}\" to create a binary alias at \"${BINARY_LINKDIR}/${target}\""; \ ${FALSE}; \ fi -.endfor -.endif -.endif +. endfor +. endif +. endif + +. if !empty(PKGCONFIG_BASE) +. if !target(create-base-pkgconfig) +create-base-pkgconfig: ${PKGCONFIG_LINKDIR} +. for pcfile in ${PKGCONFIG_BASE:S/$/.pc/} + @if `test -f ${PKGCONFIG_BASEDIR}/${pcfile}`; then \ + ${RLN} ${PKGCONFIG_BASEDIR}/${pcfile} ${PKGCONFIG_LINKDIR}/${pcfile}; \ + else \ + ${ECHO_MSG} "===> Missing \"${pcfile}\" to create a link at \"${PKGCONFIG_LINKDIR}/${pcfile}\" "; \ + ${FALSE}; \ + fi +. endfor +. endif +. endif -.if !empty(BINARY_WRAPPERS) -.if !target(create-binary-wrappers) +. if !empty(BINARY_WRAPPERS) +. if !target(create-binary-wrappers) create-binary-wrappers: ${BINARY_LINKDIR} -.for bin in ${BINARY_WRAPPERS} +. for bin in ${BINARY_WRAPPERS} @${INSTALL_SCRIPT} ${WRAPPERSDIR}/${bin} ${BINARY_LINKDIR} -.endfor -.endif -.endif +. endfor +. endif +. endif -.if defined(WARNING) +. if defined(WARNING) WARNING_WAIT?= 10 show-warnings: @${ECHO_MSG} "/!\\ WARNING /!\\" @${ECHO_MSG} -.for m in ${WARNING} +. for m in ${WARNING} @${ECHO_MSG} "${m}" | ${FMT_80} @${ECHO_MSG} -.endfor +. endfor @sleep ${WARNING_WAIT} -.endif +. endif -.if defined(ERROR) +. if defined(ERROR) show-errors: @${ECHO_MSG} "/!\\ ERRORS /!\\" @${ECHO_MSG} -.for m in ${ERROR} +. for m in ${ERROR} @${ECHO_MSG} "${m}" | ${FMT_80} @${ECHO_MSG} -.endfor +. endfor @${FALSE} -.endif +. endif -.if defined(DEVELOPER) -.if defined(DEV_WARNING) +. if defined(DEVELOPER) +. if defined(DEV_WARNING) DEV_WARNING_WAIT?= 10 show-dev-warnings: @${ECHO_MSG} "/!\\ ${PKGNAME}: Makefile warnings, please consider fixing /!\\" @${ECHO_MSG} -.for m in ${DEV_WARNING} +. for m in ${DEV_WARNING} @${ECHO_MSG} ${m} | ${FMT_80} @${ECHO_MSG} -.endfor -.if defined(DEV_WARNING_FATAL) +. endfor +. if defined(DEV_WARNING_FATAL) @${FALSE} -.else +. else @sleep ${DEV_WARNING_WAIT} -.endif -.endif +. endif +. endif -.if defined(DEV_ERROR) +. if defined(DEV_ERROR) show-dev-errors: @${ECHO_MSG} "/!\\ ${PKGNAME}: Makefile errors /!\\" @${ECHO_MSG} -.for m in ${DEV_ERROR} +. for m in ${DEV_ERROR} @${ECHO_MSG} "${m}" | ${FMT_80} @${ECHO_MSG} -.endfor +. endfor @${FALSE} -.endif -.endif #DEVELOPER +. endif +. endif #DEVELOPER ${_PORTS_DIRECTORIES}: @${MKDIR} ${.TARGET} @@ -5310,7 +5431,7 @@ _SANITY_SEQ= 050:post-chroot 100:pre-everything \ 210:show-dev-errors 220:show-dev-warnings \ 250:check-categories 300:check-makevars \ 350:check-desktop-entries 400:check-depends \ - 450:identify-install-conflicts 500:check-deprecated \ + 500:check-deprecated \ 550:check-vulnerable 600:check-license 650:check-config \ 700:buildanyway-message 750:options-message ${_USES_sanity} @@ -5335,7 +5456,7 @@ _PATCH_SEQ= 050:ask-license 100:patch-message 150:patch-depends \ ${_OPTIONS_patch} ${_USES_patch} _CONFIGURE_DEP= patch _CONFIGURE_SEQ= 150:build-depends 151:lib-depends 160:create-binary-alias \ - 161:create-binary-wrappers \ + 161:create-binary-wrappers 170:create-base-pkgconfig \ 200:configure-message 210:apply-slist \ 300:pre-configure 450:pre-configure-script \ 490:run-autotools-fixup 500:do-configure 700:post-configure \ @@ -5358,142 +5479,143 @@ _STAGE_SEQ= 050:stage-message 100:stage-dir 150:run-depends \ 900:add-plist-info 910:add-plist-docs 920:add-plist-examples \ 930:add-plist-data 940:add-plist-post ${POST_PLIST:C/^/990:/} \ ${_OPTIONS_install} ${_USES_install} \ - ${_OPTIONS_stage} ${_USES_stage} -.if defined(DEVELOPER) + ${_OPTIONS_stage} ${_USES_stage} ${_FEATURES_stage} +. if defined(DEVELOPER) _STAGE_SEQ+= 995:stage-qa -.else +. else stage-qa: stage -.endif +. endif _TEST_DEP= stage _TEST_SEQ= 100:test-message 150:test-depends 300:pre-test 500:do-test \ 800:post-test \ ${_OPTIONS_test} ${_USES_test} _INSTALL_DEP= stage _INSTALL_SEQ= 100:install-message \ + 150:identify-install-conflicts \ 200:check-already-installed \ 300:create-manifest _INSTALL_SUSEQ= 400:fake-pkg 500:security-check -_PACKAGE_DEP= stage +_PACKAGE_DEP= stage ${_TESTING_PACKAGE_DEP} _PACKAGE_SEQ= 100:package-message 300:pre-package 450:pre-package-script \ 500:do-package 850:post-package-script \ ${_OPTIONS_package} ${_USES_package} # Enforce order for -jN builds -.for _t in ${_TARGETS_STAGES} +. for _t in ${_TARGETS_STAGES} # Check if the port need to change the default order of some targets... -. if defined(TARGET_ORDER_OVERRIDE) +. if defined(TARGET_ORDER_OVERRIDE) _tmp_seq:= -. for _entry in ${_${_t}_SEQ} +. for _entry in ${_${_t}_SEQ} # for _target because :M${_target} does not work with fmake -. for _target in ${_entry:C/^[0-9]+://} -. if ${TARGET_ORDER_OVERRIDE:M*\:${_target}} +. for _target in ${_entry:C/^[0-9]+://} +. if ${TARGET_ORDER_OVERRIDE:M*\:${_target}} _tmp_seq:= ${_tmp_seq} ${TARGET_ORDER_OVERRIDE:M*\:${_target}} -. else +. else _tmp_seq:= ${_tmp_seq} ${_entry} -. endif -. endfor -. endfor +. endif +. endfor +. endfor _${_t}_SEQ:= ${_tmp_seq} -. endif -. for s in ${_${_t}_SEQ:O:C/^[0-9]+://} -. if target(${s}) -. if ! ${NOTPHONY:M${s}} -_PHONY_TARGETS+= ${s} . endif +. for s in ${_${_t}_SEQ:O:C/^[0-9]+://} +. if target(${s}) +. if ! ${NOTPHONY:M${s}} +_PHONY_TARGETS+= ${s} +. endif _${_t}_REAL_SEQ+= ${s} -. endif -. endfor -. for s in ${_${_t}_SUSEQ:O:C/^[0-9]+://} -. if target(${s}) -. if ! ${NOTPHONY:M${s}} +. endif +. endfor +. for s in ${_${_t}_SUSEQ:O:C/^[0-9]+://} +. if target(${s}) +. if ! ${NOTPHONY:M${s}} _PHONY_TARGETS+= ${s} -. endif +. endif _${_t}_REAL_SUSEQ+= ${s} -. endif -. endfor +. endif +. endfor .ORDER: ${_${_t}_DEP} ${_${_t}_REAL_SEQ} -.endfor +. endfor # Define all of the main targets which depend on a sequence of other targets. # See above *_SEQ and *_DEP. The _DEP will run before this defined target is # ran. The _SEQ will run as this target once _DEP is satisfied. -.for target in extract patch configure build stage install package +. for target in extract patch configure build stage install package # Check if config dialog needs to show and execute it if needed. If is it not # needed (_OPTIONS_OK), then just depend on the cookie which is defined later # to depend on the *_DEP and execute the *_SEQ. # If options are required, execute config-conditional and then re-execute the # target noting that config is no longer needed. -.if !target(${target}) && defined(_OPTIONS_OK) +. if !target(${target}) && defined(_OPTIONS_OK) _PHONY_TARGETS+= ${target} ${target}: ${${target:tu}_COOKIE} -.elif !target(${target}) +. elif !target(${target}) ${target}: config-conditional @cd ${.CURDIR} && ${MAKE} CONFIG_DONE_${PKGBASE:tu}=1 ${${target:tu}_COOKIE} -.elif target(${target}) && defined(IGNORE) -.endif +. elif target(${target}) && defined(IGNORE) +. endif -.if !exists(${${target:tu}_COOKIE}) +. if !exists(${${target:tu}_COOKIE}) # Define the real target behavior. Depend on the target's *_DEP. Execute # the target's *_SEQ. Also handle su and USE_SUBMAKE needs. -.if ${UID} != 0 && defined(_${target:tu}_REAL_SUSEQ) && !defined(INSTALL_AS_USER) -. if defined(USE_SUBMAKE) +. if ${UID} != 0 && defined(_${target:tu}_REAL_SUSEQ) && !defined(INSTALL_AS_USER) +. if defined(USE_SUBMAKE) ${${target:tu}_COOKIE}: ${_${target:tu}_DEP} @cd ${.CURDIR} && ${MAKE} ${_${target:tu}_REAL_SEQ} -. else # !USE_SUBMAKE +. else # !USE_SUBMAKE ${${target:tu}_COOKIE}: ${_${target:tu}_DEP} ${_${target:tu}_REAL_SEQ} -. endif # USE_SUBMAKE +. endif # USE_SUBMAKE @${ECHO_MSG} "===> Switching to root credentials for '${target}' target" @cd ${.CURDIR} && \ ${SU_CMD} "${MAKE} ${_${target:tu}_REAL_SUSEQ}" @${ECHO_MSG} "===> Returning to user credentials" @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} -.else # No SU needed -. if defined(USE_SUBMAKE) +. else # No SU needed +. if defined(USE_SUBMAKE) ${${target:tu}_COOKIE}: ${_${target:tu}_DEP} @cd ${.CURDIR} && \ ${MAKE} ${_${target:tu}_REAL_SEQ} ${_${target:tu}_REAL_SUSEQ} @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} -. else # !USE_SUBMAKE +. else # !USE_SUBMAKE ${${target:tu}_COOKIE}: ${_${target:tu}_DEP} ${_${target:tu}_REAL_SEQ} ${_${target:tu}_REAL_SUSEQ} @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} -. endif # USE_SUBMAKE -.endif # SU needed +. endif # USE_SUBMAKE +. endif # SU needed -.else # exists(cookie) +. else # exists(cookie) ${${target:tu}_COOKIE}:: @if [ ! -e ${.TARGET} ]; then \ cd ${.CURDIR} && ${MAKE} ${.TARGET}; \ fi -.endif # !exists(cookie) +. endif # !exists(cookie) -.endfor # foreach(targets) +. endfor # foreach(targets) .PHONY: ${_PHONY_TARGETS} check-sanity fetch pkg -.if !target(check-sanity) +. if !target(check-sanity) check-sanity: ${_SANITY_REAL_SEQ} -.endif +. endif -.if !target(fetch) +. if !target(fetch) fetch: ${_FETCH_DEP} ${_FETCH_REAL_SEQ} -.endif +. endif -.if !target(pkg) +. if !target(pkg) pkg: ${_PKG_DEP} ${_PKG_REAL_SEQ} -.endif +. endif -.if !target(test) +. if !target(test) test: ${_TEST_DEP} -.if !defined(NO_TEST) +. if !defined(NO_TEST) test: ${_TEST_REAL_SEQ} -.endif -.endif +. endif +. endif -.endif +. endif # End of post-makefile section. .endif |