diff options
Diffstat (limited to 'mail/exim-old/files/configure.default')
-rw-r--r-- | mail/exim-old/files/configure.default | 329 |
1 files changed, 0 insertions, 329 deletions
diff --git a/mail/exim-old/files/configure.default b/mail/exim-old/files/configure.default deleted file mode 100644 index 98de94e9f68b..000000000000 --- a/mail/exim-old/files/configure.default +++ /dev/null @@ -1,329 +0,0 @@ -###################################################################### -# Runtime configuration file for Exim # -###################################################################### - - -# This is a default configuration file which will operate correctly in -# uncomplicated installations. Please see the manual for a complete list -# of all the runtime configuration options that can be included in a -# configuration file. - - -# This file is divided into several parts, all but the last of which are -# terminated by a line containing the word "end". The parts must appear -# in the correct order, and all must be present (even if some of them are -# in fact empty). Blank lines, and lines starting with # are ignored. - - - -###################################################################### -# MAIN CONFIGURATION SETTINGS # -###################################################################### - -# Specify your host's canonical name here. If this option is not set, the -# uname() function is called to obtain the name. - -# primary_hostname = - - -# Specify the domain you want to be added to all unqualified addresses -# here. Unqualified addresses are accepted only from local callers by -# default. See the receiver_unqualified_{hosts,nets} options if you want -# to permit unqualified addresses from remote sources. If this option is -# not set, the primary_hostname value is used for qualification. - -# qualify_domain = - - -# If you want unqualified recipient addresses to be qualified with a different -# domain to unqualified sender addresses, specify the recipient domain here. -# If this option is not set, the qualify_domain value is used. - -# qualify_recipient = - - -# Specify your local domains as a colon-separated list here. If this option -# is not set (i.e. not mentioned in the configuration file), the -# qualify_recipient value is used as the only local domain. If you do not want -# to do any local deliveries, uncomment the following line, but do not supply -# any data for it. This sets local_domains to an empty string, which is not -# the same as not mentioning it at all. An empty string specifies that there -# are no local domains; not setting it at all causes the default value (the -# setting of qualify_recipient) to be used. - -# local_domains = - - -# If you want to accept mail addressed to your host's literal IP address, for -# example, mail addressed to "user@[111.111.111.111]", then uncomment the -# following line, or supply the literal domain(s) as part of "local_domains" -# above. - -# local_domains_include_host_literals - - -# No local deliveries will ever be run under the uids of these users (a colon- -# separated list). An attempt to do so gets changed so that it runs under the -# uid of "nobody" instead. This is a paranoic safety catch. Note the default -# setting means you cannot deliver mail addressed to root as if it were a -# normal user. This isn't usually a problem, as most sites have an alias for -# root that redirects such mail to a human administrator. - -exim_user = XX_BINOWN_XX -exim_group = mail -never_users = root - - -# The setting below causes Exim to do a reverse DNS lookup on all incoming -# IP calls, in order to get the true host name. If you feel this is too -# expensive, you can specify the networks for which a lookup is done, or -# remove the setting entirely. - -host_lookup_nets = 0.0.0.0/0 - - -# Exim contains support for the Realtime Blocking List (RBL) that is being -# maintained as part of the DNS. See http://maps.vix.com/rbl/ for background. -# Uncommenting the following line will make Exim reject mail from any -# host whose IP address is blacklisted in the RBL at maps.vix.com. - -# rbl_domains = rbl.maps.vix.com - - -# The setting below locks out the use of your host as a mail relay by any -# other host. If you want to permit relaying through your host from certain -# hosts or IP networks, you need to vary this option and/or make use of the -# other three options in the set sender_{host,net}_{accept,reject}_relay. -# See the section of the manual entitled "Control of relaying" for more info. -# Removing this setting altogether is not recommended, because there are many -# unscrupulous people out there who will make use of open relays to try to -# disguise the source of unsolicited bulk mail. - -sender_net_accept_relay = 127.0.0.1/32 - - -# If you want Exim to support the "percent hack" for all your local domains, -# uncomment the following line. This is the feature by which mail addressed -# to x%y@z (where z is one of your local domains) is locally rerouted to -# x@y and sent on. Otherwise x%y is treated as an ordinary local part. - -# percent_hack_domains=* - -pid_file_path = /var/run/exim%s.pid - - -end - - - -###################################################################### -# TRANSPORTS CONFIGURATION # -###################################################################### -# ORDER DOES NOT MATTER # -# Only one appropriate transport is called for each delivery. # -###################################################################### - -# A transport is used only when referenced from a director or a router that -# successfully handles an address. - - -# This transport is used for delivering messages over SMTP connections. - -remote_smtp: - driver = smtp - - -# This transport is used for local delivery to user mailboxes. By default -# it will be run under the uid and gid of the local user, and requires -# the sticky bit to be set on the /var/mail directory. Some systems use -# the alternative approach of running mail deliveries under a particular -# group instead of using the sticky bit. The commented options below show -# how this can be done. - -local_delivery: - driver = appendfile - file = /var/mail/${local_part} - delivery_date_add - envelope_to_add - return_path_add - group = mail - mode = 0660 - - -# This transport is used for handling pipe addresses generated by alias -# or .forward files. It has a conventional name, since it is not actually -# mentioned elsewhere in this configuration file. (A different name *can* -# be specified via the "address_pipe_transport" option if you really want -# to.) If the pipe generates any standard output, it is returned to the sender -# of the message as a delivery error. Set return_fail_output instead if you -# want this to happen only when the pipe fails to complete normally. - -address_pipe: - driver = pipe - return_output - - -# This transport is used for handling file addresses generated by alias -# or .forward files. It has a conventional name, since it is not actually -# mentioned elsewhere in this configuration file. - -address_file: - driver = appendfile - delivery_date_add - envelope_to_add - return_path_add - - -# This transport is used for handling file addresses generated by alias -# or .forward files if the path ends in "/", which causes it to be treated -# as a directory name rather than a file name. Each message is then delivered -# to a unique file in the directory. If instead you want all such deliveries to -# be in the "maildir" format that is used by some other mail software, -# uncomment the final option below. If this is done, the directory specified -# in the .forward or alias file is the base maildir directory. -# -# Should you want to be able to specify either maildir or non-maildir -# directory-style deliveries, then you must set up yet another transport, -# called address_directory2. This is used if the path ends in "//" so should -# be the one used for maildir, as the double slash suggests another level -# of directory. In the absence of address_directory2, paths ending in // -# are passed to address_directory. - -address_directory: - driver = appendfile - delivery_date_add - envelope_to_add - return_path_add - no_from_hack - prefix = "" - suffix = "" -# maildir_format - - -# This transport is used for handling autoreplies generated by the filtering -# option of the forwardfile director. It has a conventional name, since it -# is not actually mentioned elsewhere in this configuration file. - -address_reply: - driver = autoreply - - -end - - - -###################################################################### -# DIRECTORS CONFIGURATION # -# Specifies how local addresses are handled # -###################################################################### -# ORDER DOES MATTER # -# A local address is passed to each in turn until it is accepted. # -###################################################################### - -# Local addresses are those with a domain that matches some item in the -# "local_domains" setting above, or those which are passed back from the -# routers because of a "self=local" setting (not used in this configuration). - - -# This director handles aliasing using a traditional /etc/aliases file. -# If any of your aliases expand to pipes or files, you will need to set -# up a user and a group for these deliveries to run under. You can do -# this by uncommenting the "user" option below (changing the user name -# as appropriate) and adding a "group" option if necessary. - -system_aliases: - driver = aliasfile - file = /etc/aliases - search_type = lsearch -# user = XX_BINOWN_XX - - -# This director handles forwarding using traditional .forward files. -# If you want it also to allow mail filtering when a forward file -# starts with the string "# Exim filter", uncomment the "filter" option. -# The check_ancestor option means that if the forward file generates an -# address that is an ancestor of the current one, the current one gets -# passed on instead. This covers the case where A is aliased to B and B -# has a .forward file pointing to A. - -userforward: - driver = forwardfile - file = .forward - no_verify - no_expn - check_ancestor -# filter - - -# This director matches local user mailboxes. - -localuser: - driver = localuser - transport = local_delivery - - -end - - - -###################################################################### -# ROUTERS CONFIGURATION # -# Specifies how remote addresses are handled # -###################################################################### -# ORDER DOES MATTER # -# A remote address is passed to each in turn until it is accepted. # -###################################################################### - -# Remote addresses are those with a domain that does not match any item -# in the "local_domains" setting above. - - -# This router routes to remote hosts over SMTP using a DNS lookup with -# default options. - -lookuphost: - driver = lookuphost - transport = remote_smtp - - -# This router routes to remote hosts over SMTP by explicit IP address, -# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs -# require this facility, which is why it is enabled by default in Exim. -# If you want to lock it out, set forbid_domain_literals in the main -# configuration section above. - -literal: - driver = ipliteral - transport = remote_smtp - - -end - - - -###################################################################### -# RETRY CONFIGURATION # -###################################################################### - -# This single retry rule applies to all domains and all errors. It specifies -# retries every 15 minutes for 2 hours, then increasing retry intervals, -# starting at 1 hour and increasing each time by a factor of 1.5, up to 16 -# hours, then retries every 8 hours until 4 days have passed since the first -# failed delivery. - -# Domain Error Retries -# ------ ----- ------- - -* * F,2h,15m; G,16h,1h,1.5; F,4d,8h - -end - - - -###################################################################### -# REWRITE CONFIGURATION # -###################################################################### - -# There are no rewriting specifications in this default configuration file. - -# End of Exim configuration file |