#-*- tab-width: 4; -*- # ex:ts=4 # # $FreeBSD$ # # Port variables: # USE_QT* - List of Qt modules to depend on, with optional '_build' # and '_run' suffixes. Define it empty to include this file # without depending on Qt ports. # QT_DIST - The port belongs to the Qt distribution. Set to 'yes' for # Qt 4, or to the distribution name(s) for newer versions. # QT_NONSTANDARD - Suppress modification of configure and make environment. # # Global switches (for inclusion into /etc/make.conf): # QT4_OPTIONS - A list of (Qt 4-only) global options; can be CUPS, NAS # and/or QGTKSTYLE. If set, Qt will be built with support # for: # * Common UNIX Printing System (CUPS); # * Network Audio System (NAS); # * GTK+-based Qt theme (QGTKSTYLE). .if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include) Qt_Include_MAINTAINER= kde@FreeBSD.org Qt_Pre_Include= bsd.qt.mk # Qt versions currently supported by the framework. _QT_SUPPORTED?= 4 5 QT4_VERSION?= 4.8.7 QT5_VERSION?= 5.7.1 _QT_RELNAME= qt${_QT_VERSION:R:R} _QT_VERSION= # empty .for ver in ${_QT_SUPPORTED} . if defined(USE_QT${ver}) . if empty(_QT_VERSION) _QT_VERSION= ${QT${ver}_VERSION} . else # Reject different USE_QT*. IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #' . endif . endif .endfor .if empty(_QT_VERSION) # The file was included without USE_QT*. IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #' .endif .if defined(QT_DIST) QT_NONSTANDARD= yes MASTER_SITES= ${MASTER_SITE_QT} DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo LICENSE?= LGPL21 . if !exists(${PKGDIR}/pkg-descr) DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr . endif # Stage support. DESTDIRNAME= INSTALL_ROOT . if ${_QT_VERSION:M4*} MASTER_SITE_SUBDIR?= official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/ DISTNAME= qt-everywhere-opensource-src-${_QT_VERSION} DIST_SUBDIR= KDE . else MASTER_SITE_SUBDIR?= official_releases/qt/${_QT_VERSION:R}/${_QT_VERSION}/submodules/ DISTNAME= ${QT_DIST:S,^,qt,:S,$,-opensource-src-${DISTVERSION},} DISTFILES= ${DISTNAME:S,$,${EXTRACT_SUFX},} DIST_SUBDIR= KDE/Qt/${_QT_VERSION} USES+= tar:xz # Qt (at least when used with qmake) has a tendency to overlink: some libraries # have dependencies on others in the mkspec configurations and the latter are # always passed to the linker even if they are not actually used. By passing # --as-needed to the linker by default when building the Qt ports we do not # have to declare a lot of unnecessary dependencies in USE_QT5. # This could arguably work for Qt4 too, but since it is maintenance mode it is # better not to fix what is not explicitly broken there. LDFLAGS+= -Wl,--as-needed . if ${.TARGETS:Mmakesum} || ${.TARGETS:Mfetch} && \ defined(DISABLE_SIZE) && defined(NO_CHECKSUM) # Ensure that the "makesum" target (with its inner "fetch" one) uses # devel/qt*/distinfo for every port. . if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME} QT_DIST= 3d base canvas3d charts connectivity datavis3d declarative \ declarative-render2d gamepad graphicaleffects imageformats \ location multimedia quickcontrols quickcontrols2 script scxml \ sensors serialbus serialport svg tools translations \ virtualkeyboard webchannel webkit websockets x11extras \ xmlpatterns . endif . endif . if ${QT_DIST} == "base" && ${PORTNAME} != "qmake" # Qt configure requires pkg-config to detect dependencies. USES+= pkgconfig # Set QMAKESPEC when building qtbase so that qmake (called by the configure # script) can find the mkspecs we create ourselves in devel/qmake5. CONFIGURE_ENV+= QMAKESPEC="${QMAKESPEC}" MAKE_ENV+= QMAKESPEC="${QMAKESPEC}" . endif # -nomake is only used by qtbase's configure script. # Other ports from other Qt modules will automatically build examples and # tests if the directories exist because of mkspecs/features/qt_parts.prf. EXTRACT_AFTER_ARGS?= ${DISTNAME:S,$,/examples,:S,^,--exclude ,} \ ${DISTNAME:S,$,/tests,:S,^,--exclude ,} . endif # ! ${_QT_VERSION:M4*} CONFIGURE_ENV+= MAKE="${MAKE:T}" CONFIGURE_ARGS+=-opensource -confirm-license \ -platform ${QMAKESPEC} \ -no-pch \ -prefix ${PREFIX} \ -bindir ${PREFIX}/${QT_BINDIR_REL} \ -headerdir ${PREFIX}/${QT_INCDIR_REL} \ -libdir ${PREFIX}/${QT_LIBDIR_REL} \ -plugindir ${PREFIX}/${QT_PLUGINDIR_REL} \ -importdir ${PREFIX}/${QT_IMPORTDIR_REL} \ -datadir ${PREFIX}/${QT_DATADIR_REL} \ -docdir ${PREFIX}/${QT_DOCDIR_REL} \ -translationdir ${PREFIX}/${QT_L10NDIR_REL} \ -sysconfdir ${PREFIX}/${QT_ETCDIR_REL} . if ${_QT_VERSION:M4*} CONFIGURE_ARGS+=-fast \ -system-libjpeg -system-libpng \ -system-libmng -system-libtiff -system-zlib \ -no-phonon-backend \ -examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/examples \ -demosdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/demos . else CONFIGURE_ARGS+=-nomake examples -nomake tests \ -archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \ -libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \ -qmldir ${PREFIX}/${QT_QMLDIR_REL} \ -examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \ -testsdir ${PREFIX}/${QT_TESTDIR_REL} . if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2) CONFIGURE_ARGS+=-no-sse2 . endif . endif . if defined(WANT_QT_DEBUG) || defined(WITH_DEBUG) WITH_DEBUG= yes STRIP= # It's done prior to bsd.qt.mk inclusion. CONFIGURE_ARGS+=-debug -separate-debug-info # Override configuration in global qconfig.pri. QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \ QT_CONFIG-="release" PLIST_SUB+= DEBUG="" . else CONFIGURE_ARGS+=-release -no-separate-debug-info QMAKE_ARGS+= QT_CONFIG+="release" \ QT_CONFIG-="debug separate_debug_info" PLIST_SUB+= DEBUG="@comment " . endif . if defined(WANT_QT_VERBOSE_CONFIGURE) CONFIGURE_ARGS+=-verbose . endif . if ${QT_DIST} == "base" || ${_QT_VERSION:M4*} . if ${_QT_VERSION:M4*} _EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \ ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool . else _EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_create__cmake.prf \ ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf . endif EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \ ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \ ${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5} . endif # Override settings installed in qconfig.h and *.pri files. The flags will be # installed along with the port, but have to be passed as arguments while # building the port itself. Flags prefixed with "-" (e.g., "-CUPS" and "-cups") # are needed to disable some features. . if !defined(${QT_MODNAME}) || empty(${QT_MODNAME}) # Used for both qconfig-*.h and qt_config_*.pri; it can't be empty. QT_MODNAME= ${PORTNAME} . endif QT_DEFINES?= # For qconfig.h flags (without "QT_" prefix). QT_CONFIG?= # For *.pri files QT_CONFIG flags. . if ${QT_DEFINES} QMAKE_ARGS+= DEFINES+="${QT_DEFINES:O:u:C/^([^-])/QT_\1/:C/^-/QT_NO_/:O}" . if ${QT_DEFINES:N-*} # Use a script to cleanup qconfig-modules.h (see qt-post-install). PKGDEINSTALL= ${WRKDIR}/pkg-deinstall . endif . endif . if ${QT_CONFIG:N-*} QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}" . endif . if ${QT_CONFIG:M-*} QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}" . endif # Add a RUN_DEPENDS on misc/qtchooser to select the binaries. # The binaries of both supported Qt versions are installed to # ${LOCALBASE}/lib/qt[45]/bin. The port misc/qtchooser installs # wrapper binaries into ${LOCALBASE}/bin, and chooses the correct # one depending on the value of QT_SELECT (which we pass to both # CONFIGURE_ENV and MAKE_ENV). Therefore make all QT_DIST ports # RUN_DEPEND on it. RUN_DEPENDS+= qtchooser:misc/qtchooser PLIST_SUB+= SHORTVER=${DISTVERSION:R} \ FULLVER=${DISTVERSION:C/-.*//} .endif # defined(QT_DIST) # A wrapper (qtchooser) is used to invoke binaries. QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin QT_INCDIR_REL?= include/${_QT_RELNAME} QT_LIBDIR_REL?= lib/${_QT_RELNAME} QT_ARCHDIR_REL?=${QT_LIBDIR_REL} QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME} QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml QT_DATADIR_REL?=share/${_QT_RELNAME} QT_DOCDIR_REL?= share/doc/${_QT_RELNAME} QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations QT_ETCDIR_REL?= etc/xdg QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME} QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests QT_CMAKEDIR_REL?= lib/cmake QT_QTCHOOSERDIR_REL?= ${QT_ETCDIR_REL}/qtchooser # Not customizable. .if ${_QT_VERSION:M4*} QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs _QT_LIBVER= # empty .else QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs _QT_LIBVER= ${_QT_VERSION:R:R} .endif LRELEASE?= ${QT_BINDIR}/lrelease LUPDATE?= ${QT_BINDIR}/lupdate MOC?= ${QT_BINDIR}/moc RCC?= ${QT_BINDIR}/rcc UIC?= ${QT_BINDIR}/uic QMAKE?= ${QT_BINDIR}/qmake # Needed to redefine the qmake target for internal Qt configuration. _QMAKE?= ${QMAKE} QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER} # The whole Qt distribution should be built with the same compiler, but it's # better to support custom settings. Dereferencing the detection allows to # avoid forking a shell on each inclusion of this file, and to catch any CXX # customization (via USE_GCC, etc.). QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in *clang*) echo clang ;; *) echo g++ ;; esac) # Import QMAKE_ENV and QMAKE_ARGS definitions. USES+= qmake:_env .for dir in BIN INC LIB ARCH PLUGIN LIBEXEC IMPORT \ QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC \ CMAKE QTCHOOSER QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL} # Export all directories to the plist substituion for QT_DIST ports. # For the others, exclude QT_CMAKEDIR and QT_ETCDIR. . if (${dir:NCMAKE} && ${dir:NETC}) || defined(QT_DIST) PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}" . endif .endfor # Pass the chosen Qt version to the environment for qtchooser. CONFIGURE_ENV+= QT_SELECT=${_QT_RELNAME} MAKE_ENV+= QT_SELECT=${_QT_RELNAME} .endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include) .if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include) Qt_Post_Include= bsd.qt.mk .if !defined(QT_NONSTANDARD) CONFIGURE_ENV+= QTDIR="${QT_ARCHDIR}" QMAKE="${QMAKE}" \ MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \ QMAKESPEC="${QMAKESPEC}" CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \ --with-qt-libraries=${QT_LIBDIR} \ --with-extra-includes=${LOCALBASE}/include \ --with-extra-libs=${LOCALBASE}/lib .endif # !defined(QT_NONSTANDARD) _USE_QT_ALL= assistant dbus declarative designer doc gui help \ imageformats l10n linguist linguisttools multimedia \ network opengl pixeltool qdbusviewer qmake script \ scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \ sql-sqlite2 sql-sqlite3 svg testlib webkit \ xml xmlpatterns _USE_QT4_ONLY= accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \ codecs-kr codecs-tw corelib demo graphicssystems-opengl \ help-tools iconengines inputmethods makeqpf moc phonon \ phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \ qtestlib qvfb rcc uic uic3 xmlpatterns-tool _USE_QT5_ONLY= 3d buildtools canvas3d charts concurrent connectivity \ core datavis3d declarative-render2d examples gamepad \ graphicaleffects location paths phonon4 printsupport \ qdbus qdoc qdoc-data qev qml quick quickcontrols \ quickcontrols2 scxml sensors serialbus serialport \ sql-tds uiplugin uitools virtualkeyboard webchannel \ websockets widgets x11extras 3d_PORT= graphics/${_QT_RELNAME}-3d 3d_LIB= libQt${_QT_LIBVER}3DCore.so accessible_PORT= accessibility/${_QT_RELNAME}-accessible accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so assistant_PORT= devel/${_QT_RELNAME}-assistant assistant_PATH= ${QT_BINDIR}/assistant assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp assistant-adp_PATH= ${PREFIX}/bin/assistant_adp assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so buildtools_PORT= devel/${_QT_RELNAME}-buildtools buildtools_PATH= ${MOC} canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir charts_PORT= x11-toolkits/${_QT_RELNAME}-charts charts_LIB= libQt${_QT_LIBVER}Charts.so clucene_PORT= textproc/${_QT_RELNAME}-clucene clucene_LIB= libQt${_QT_LIBVER}CLucene.so codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so codecs-kr_PORT= korean/${_QT_RELNAME}-codecs-kr codecs-kr_PATH= ${QT_PLUGINDIR}/codecs/libqkrcodecs.so codecs-tw_PORT= chinese/${_QT_RELNAME}-codecs-tw codecs-tw_PATH= ${QT_PLUGINDIR}/codecs/libqtwcodecs.so concurrent_PORT= devel/${_QT_RELNAME}-concurrent concurrent_LIB= libQt${_QT_LIBVER}Concurrent.so connectivity_PORT= comms/${_QT_RELNAME}-connectivity connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so core_PORT= devel/${_QT_RELNAME}-core core_LIB= libQt${_QT_LIBVER}Core.so corelib_PORT= devel/${_QT_RELNAME}-corelib corelib_LIB= ${core_LIB} datavis3d_PORT= x11-toolkits/${_QT_RELNAME}-datavis3d datavis3d_LIB= libQt${_QT_LIBVER}DataVisualization.so dbus_PORT= devel/${_QT_RELNAME}-dbus dbus_LIB= libQt${_QT_LIBVER}DBus.so declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative declarative_LIB= libQt${_QT_LIBVER}Declarative.so declarative-render2d_PORT= x11-toolkits/${_QT_RELNAME}-declarative-render2d declarative-render2d_PATH= ${QT_PLUGINDIR}/scenegraph/libsoftwarecontext.so demo_PORT= misc/${_QT_RELNAME}-qtdemo demo_PATH= ${QT_BINDIR}/qtdemo designer_PORT= devel/${_QT_RELNAME}-designer designer_PATH= ${QT_BINDIR}/designer doc_PORT= misc/${_QT_RELNAME}-doc doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R} examples_PORT= misc/${_QT_RELNAME}-examples examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R} gamepad_PORT= x11-toolkits/${_QT_RELNAME}-gamepad gamepad_LIB= libQt${_QT_LIBVER}Gamepad.so graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so gui_PORT= x11-toolkits/${_QT_RELNAME}-gui gui_LIB= libQt${_QT_LIBVER}Gui.so help_PORT= devel/${_QT_RELNAME}-help help_LIB= libQt${_QT_LIBVER}Help.so help-tools_PORT= devel/${_QT_RELNAME}-help-tools help-tools_PATH= ${QT_BINDIR}/qhelpgenerator iconengines_PORT= graphics/${_QT_RELNAME}-iconengines iconengines_PATH= ${QT_PLUGINDIR}/iconengines/libqsvgicon.so imageformats_PORT= graphics/${_QT_RELNAME}-imageformats imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so linguist_PORT= devel/${_QT_RELNAME}-linguist linguist_PATH= ${QT_BINDIR}/linguist linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools linguisttools_PATH= ${LRELEASE} location_PORT= devel/${_QT_RELNAME}-location location_LIB= libQt${_QT_LIBVER}Location.so l10n_PORT= misc/${_QT_RELNAME}-l10n l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R} makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf makeqpf_PATH= ${QT_BINDIR}/makeqpf moc_PORT= devel/${_QT_RELNAME}-moc moc_PATH= ${MOC} multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so network_PORT= net/${_QT_RELNAME}-network network_LIB= libQt${_QT_LIBVER}Network.so opengl_PORT= graphics/${_QT_RELNAME}-opengl opengl_LIB= libQt${_QT_LIBVER}OpenGL.so paths_PORT= sysutils/${_QT_RELNAME}-qtpaths paths_PATH= ${QT_BINDIR}/qtpaths pixeltool_PORT= graphics/${_QT_RELNAME}-pixeltool pixeltool_PATH= ${QT_BINDIR}/pixeltool phonon_PORT= multimedia/phonon phonon_LIB= libphonon.so phonon4_PORT= multimedia/${_QT_RELNAME}-phonon4 phonon4_LIB= libphonon4${_QT_RELNAME}.so phonon-gst_PORT= multimedia/phonon-gstreamer phonon-gst_PATH= ${QT_PLUGINDIR}/phonon_backend/libphonon_gstreamer.so porting_PORT= devel/${_QT_RELNAME}-porting porting_PATH= ${QT_BINDIR}/qt3to4 printsupport_PORT= print/${_QT_RELNAME}-printsupport printsupport_LIB= libQt${_QT_LIBVER}PrintSupport.so qdbus_PORT= devel/${_QT_RELNAME}-qdbus qdbus_PATH= ${QT_BINDIR}/qdbus qdbusviewer_PORT= devel/${_QT_RELNAME}-qdbusviewer qdbusviewer_PATH= ${QT_BINDIR}/qdbusviewer qdoc_PORT= devel/${_QT_RELNAME}-qdoc qdoc_PATH= ${QT_BINDIR}/qdoc qdoc-data_PORT= devel/${_QT_RELNAME}-qdoc-data qdoc-data_PATH= ${QT_DOCDIR}/global/config.qdocconf qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3 qdoc3_PATH= ${QT_BINDIR}/qdoc3 qev_PORT= x11/${_QT_RELNAME}-qev qev_PATH= ${QT_BINDIR}/qev qmake_PORT= devel/${_QT_RELNAME}-qmake qmake_PATH= ${QMAKE} qml_PORT= lang/${_QT_RELNAME}-qml qml_LIB= libQt${_QT_LIBVER}Qml.so qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer qmlviewer_PATH= ${QT_BINDIR}/qmlviewer qt3support_PORT= devel/${_QT_RELNAME}-qt3support qt3support_LIB= libQt${_QT_LIBVER}3Support.so qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig qtconfig_PATH= ${QT_BINDIR}/qtconfig qtestlib_PORT= ${testlib_PORT} qtestlib_LIB= ${testlib_LIB} quick_PORT= x11-toolkits/${_QT_RELNAME}-quick quick_LIB= libQt${_QT_LIBVER}Quick.so quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2 quickcontrols2_LIB= libQt${_QT_LIBVER}QuickControls2.so qvfb_PORT= devel/${_QT_RELNAME}-qvfb qvfb_PATH= ${QT_BINDIR}/qvfb rcc_PORT= devel/${_QT_RELNAME}-rcc rcc_PATH= ${RCC} sensors_PORT= comms/${_QT_RELNAME}-sensors sensors_LIB= libQt${_QT_LIBVER}Sensors.so script_PORT= devel/${_QT_RELNAME}-script script_LIB= libQt${_QT_LIBVER}Script.so scripttools_PORT= devel/${_QT_RELNAME}-scripttools scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so scxml_PORT= devel/${_QT_RELNAME}-scxml scxml_LIB= libQt${_QT_LIBVER}Scxml.so serialbus_PORT= comms/${_QT_RELNAME}-serialbus serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so serialport_PORT= comms/${_QT_RELNAME}-serialport serialport_LIB= libQt${_QT_LIBVER}SerialPort.so sql_PORT= databases/${_QT_RELNAME}-sql sql_LIB= libQt${_QT_LIBVER}Sql.so sql-pgsql_PATH= ${QT_PLUGINDIR}/sqldrivers/libqsqlpsql.so . if ${_QT_VERSION:M4*} sql-sqlite2_PORT= databases/${_QT_RELNAME}-sqlite-plugin . endif sql-sqlite3_PATH= ${QT_PLUGINDIR}/sqldrivers/libqsqlite.so . for db in ibase mysql odbc pgsql sqlite2 sqlite3 tds . if ${_QT_VERSION:M4*} sql-${db}_PORT?= databases/${_QT_RELNAME}-${db}-plugin . else sql-${db}_PORT?= databases/${_QT_RELNAME}-sqldrivers-${db} . endif sql-${db}_PATH?= ${QT_PLUGINDIR}/sqldrivers/libqsql${db:C/^sql//}.so . endfor svg_PORT= graphics/${_QT_RELNAME}-svg svg_LIB= libQt${_QT_LIBVER}Svg.so testlib_PORT= devel/${_QT_RELNAME}-testlib testlib_LIB= libQt${_QT_LIBVER}Test.so uic_PORT= devel/${_QT_RELNAME}-uic uic_PATH= ${UIC} uic3_PORT= devel/${_QT_RELNAME}-uic3 uic3_PATH= ${QT_BINDIR}/uic3 uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin uitools_PORT= devel/${_QT_RELNAME}-uitools uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a virtualkeyboard_PORT= x11-toolkits/${_QT_RELNAME}-virtualkeyboard virtualkeyboard_PATH= ${QT_PLUGINDIR}/platforminputcontexts/libqtvirtualkeyboardplugin.so webchannel_PORT= www/${_QT_RELNAME}-webchannel webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so websockets_PORT= www/${_QT_RELNAME}-websockets websockets_LIB= libQt${_QT_LIBVER}WebSockets.so webkit_PORT= www/${_QT_RELNAME}-webkit webkit_LIB= libQt${_QT_LIBVER}WebKit.so widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets widgets_LIB= libQt${_QT_LIBVER}Widgets.so x11extras_PORT= x11/${_QT_RELNAME}-x11extras x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so xml_PORT= textproc/${_QT_RELNAME}-xml xml_LIB= libQt${_QT_LIBVER}Xml.so xmlpatterns_PORT= textproc/${_QT_RELNAME}-xmlpatterns xmlpatterns_LIB= libQt${_QT_LIBVER}XmlPatterns.so xmlpatterns-tool_PORT= textproc/${_QT_RELNAME}-xmlpatterns-tool xmlpatterns-tool_PATH= ${QT_BINDIR}/xmlpatterns _USE_QT= ${USE_QT${_QT_VERSION:R:R}} _USE_QT_ALL+= ${_USE_QT${_QT_VERSION:R:R}_ONLY} # Iterate through components deprived of suffix. . for component in ${_USE_QT:O:u:C/_.+//} # Check that the component is valid. . if ${_USE_QT_ALL:M${component}} != "" # Skip meta-components (currently none). . if defined(${component}_PORT) && (defined(${component}_PATH) || defined(${component}_LIB)) # Check if a dependency type is explicitly requested. . if ${_USE_QT:M${component}_*} != "" && ${_USE_QT:M${component}} == "" ${component}_TYPE= # empty . if ${_USE_QT:M${component}_build} != "" ${component}_TYPE+= build . endif . if ${_USE_QT:M${component}_run} != "" ${component}_TYPE+= run . endif . endif # ${_USE_QT:M${component}_*} != "" && ${_USE_QT:M${component}} == "" # If no dependency type is set, default to full dependency. . if !defined(${component}_TYPE) ${component}_TYPE= build run . endif # Set real dependencies. . if defined(${component}_LIB) && ${${component}_TYPE:Mbuild} && ${${component}_TYPE:Mrun} LIB_DEPENDS+= ${${component}_LIB}:${${component}_PORT} . else ${component}_PATH?= ${QT_LIBDIR}/${${component}_LIB} ${component}_DEPENDS= ${${component}_PATH}:${${component}_PORT} . if ${${component}_TYPE:Mbuild} != "" BUILD_DEPENDS+= ${${component}_DEPENDS} . endif . if ${${component}_TYPE:Mrun} != "" RUN_DEPENDS+= ${${component}_DEPENDS} . endif . endif # ${${component}_LIB} && ${${component}_TYPE:Mbuild} && ${${component}_TYPE:Mrun} . endif # defined(${component}_PORT) && defined(${component}_PATH) . else # ! ${_USE_QT_ALL:M${component}} != "" IGNORE= cannot be installed: unknown USE_QT component '${component}' . endif # ${_USE_QT_ALL:M${component}} != "" . endfor .if defined(QT_DIST) && ! ${_QT_VERSION:M4*} . if ${QT_DIST} == "base" # qtbase requires some tools to be symlinked to the build directory. _QT_TOOLS= # empty . if ${PORTNAME} != "qmake" _QT_TOOLS+= ${QMAKE} . endif . if ${PORTNAME} != "buildtools" _QT_TOOLS+= ${MOC} ${RCC} . endif . if ${PORTNAME} != "qdoc" _QT_TOOLS+= qdoc . endif . if ${PORTNAME} != "dbus" _QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp . endif . if ${PORTNAME} != "widgets" _QT_TOOLS+= ${UIC} . endif # The list of QtBase components that need to be linked into WRKSRC/lib for # other QtBase ports. See below. _QT5_BASE= core dbus gui network sql widgets pre-configure: qtbase-pre-configure qtbase-pre-configure: . for tool in ${_QT_TOOLS} @${TEST} -e ${QT_BINDIR}/${tool:T} && \ ${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} || \ ${TRUE} . endfor # The following is a fix for the inplace upgrade problem we faced (see # QTBUG-40825 and ports bugs 194088, 195105 and 198720) previously, # which previously was adressed by making sure, that ${LOCALBASE}/lib, which # would often gets added by pkgconf for the dependencies, was passed after # ${WRKSRC}/lib. # * We fix the inplace upgrade problem by moving the Qt5 libraries into # ${LOCALBASE}/lib/qt5. Therefore a -L${LOCALBASE}/lib does no harm anymore. # * However, this means, that the ports belonging to the split up QtBase package # now no longer can find their depending QtBase libraries. We fix this by # linking these into ${CONFIGURE_WRKSRC}/lib if the given QtBase port depends # on them. . if ${QT_DIST:Mbase} . for basedep in ${_QT5_BASE} . if ${USE_QT5:M${basedep}} ${LN} -sf ${QT_LIBDIR}/${${basedep}_LIB} ${CONFIGURE_WRKSRC}/lib . endif . endfor . endif # # **** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE **** # # Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out # certain paths from pkg-config calls (see the explanation in # devel/qt5/files/patch-configure) as well as for setting # QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for # ports/194088. post-patch: qtbase-post-patch qtbase-post-patch: ${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \ ${WRKSRC}/configure . if ${PORTNAME} != "qmake" _QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake post-configure: qmake-configure . endif . endif # ${QT_DIST} == "base" pre-configure: qt5-pre-configure qt5-pre-configure: # Qt 5.3.2 introduced a check in mkspecs/features/create_cmake.prf that # requires tests/auto/cmake to be present, otherwise the configure stage will # fail. # Since we cannot extract tests/auto/cmake/ and exclude tests/ at the same # time, we have to disable the check in a cache file (the only way to get this # value through to the configure script in qtbase). ${MKDIR} ${CONFIGURE_WRKSRC} ${ECHO_CMD} 'CMAKE_MODULE_TESTS = -' > ${CONFIGURE_WRKSRC}/.qmake.cache # # **** THIS PART IS OBSOLETE FOR THE NEXT QT UPGRADE **** # # We piggyback on QMAKE_LIBDIR_FLAGS to make sure -L${WRKSRC}/lib is passed to # the linker before -L/usr/local/lib. By default, the opposite happens, which # is a problem when a Qt port is being upgraded, since an existing library # would end up being picked up instead of those built in ${WRKSRC}/lib. Since # qmake appends the value of QMAKE_LIBDIR to QMAKE_LIBDIR_FLAGS, we can use the # latter to get the linker path order right. qmake is smart enough to strip # occurrences of ${WRKSRC}/lib from .pc and .prl files when installing them. # See QTBUG-40825 and ports bugs 194088, 195105 and 198720. ${ECHO_CMD} 'QMAKE_LIBDIR_FLAGS = -L${CONFIGURE_WRKSRC}/lib' >> ${CONFIGURE_WRKSRC}/.qmake.cache post-install: qt-post-install qt-post-install: . if ${QT_DEFINES:N-*} # We can't use SUB_FILES with a shared pkg-deinstall.in. # We need it to be a script instead of a group of @unexecs, otherwise # qconfig-modules.h cleanup will be run in pre-deinstall stage, which is # useless. This will probably be replaced by a Keywords/ script in the future. @${SED} -e 's,%%QT_MODNAME%%,${QT_MODNAME},g' \ -e 's,%%QT_INCDIR%%,${QT_INCDIR},g' \ ${.CURDIR:H:H}/devel/${_QT_RELNAME}/${FILESDIR:T}/${PKGDEINSTALL:T}.in > \ ${PKGDEINSTALL} @${MKDIR} ${STAGEDIR}${QT_INCDIR}/QtCore/modules @${ECHO_CMD} -n \ > ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h . for def in ${QT_DEFINES:N-*:O:u:C/=.*$//} @${ECHO_CMD} "#if !defined(QT_${def}) && !defined(QT_NO_${def})" \ >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h ${ECHO_CMD} "# define QT_${def}" \ >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h @${ECHO_CMD} "#endif" \ >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h @${ECHO_CMD} \ >> ${STAGEDIR}${QT_INCDIR}/QtCore/modules/qconfig-${QT_MODNAME}.h . endfor @${ECHO_CMD} "${PREFIX}/${QT_INCDIR_REL}/QtCore/modules/qconfig-${QT_MODNAME}.h" \ >> ${TMPPLIST} @${ECHO_CMD} "@exec echo '#include ' >> ${PREFIX}/${QT_INCDIR_REL}/QtCore/qconfig-modules.h" \ >> ${TMPPLIST} . endif # ${QT_DEFINES:N-*} . if ${QT_CONFIG:N-*} @${MKDIR} ${STAGEDIR}${QT_MKSPECDIR}/modules ${ECHO_CMD} "QT_CONFIG += ${QT_CONFIG:N-*:O:u}" \ > ${STAGEDIR}${QT_MKSPECDIR}/modules/qt_config_${QT_MODNAME}.pri @${ECHO_CMD} "${PREFIX}/${QT_MKSPECDIR_REL}/modules/qt_config_${QT_MODNAME}.pri" \ >> ${TMPPLIST} . endif # ${QT_CONFIG:N-*} .endif # defined(QT_DIST) && ! ${_QT_VERSION:M4*} .endif # defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)