# Created by: Anton Karpov # $FreeBSD$ PORTNAME= gpsd PORTVERSION= 3.9 CATEGORIES= astro geography MASTER_SITES= SAVANNAH MAINTAINER= glebius@FreeBSD.org COMMENT= Daemon that monitors one or more GPSes attached to a host computer BUILD_DEPENDS= docbook-xsl>=0:${PORTSDIR}/textproc/docbook-xsl \ xsltproc:${PORTSDIR}/textproc/libxslt USES= pathfix pkgconfig python scons USE_RC_SUBR= gpsd MAKE_ARGS= prefix="${PREFIX}" mandir="man" pkgconfig="libdata/pkgconfig" \ chrpath=no MAKE_ENV= DESTDIR="${STAGEDIR}" OPTIONS_DEFINE= AIVDM ASHTECH CPPBIND DBUS EARTHMATE EVERMORE FV18 GARMIN GARMINTXT \ GEOSTAR GPSCLOCK GTK2 IPV6 ITRAX MTK NAVCOM NETFEED NMEA NTPSHM NTRIP \ OCEANSERVER OLDPROTO ONCORE PASSTHROUGH PPS PROFILING RECONFIGURE \ RTCM104V2 RTCM104V3 SHMEXPORT SIRF SOCKEXPORT SUPERSTARII TIMING TNT TRIPMATE \ TSIP QTBIND UBX USB OPTIONS_DEFAULT= AIVDM ASHTECH CPPBIND EARTHMATE EVERMORE FV18 GARMIN GARMINTXT GEOSTAR \ GPSCLOCK ITRAX NAVCOM NETFEED NMEA NTPSHM NTRIP OCEANSERVER OLDPROTO \ ONCORE PASSTHROUGH PPS RECONFIGURE RTCM104V2 RTCM104V3 SHMEXPORT SIRF \ SOCKEXPORT SUPERSTARII TIMING TNT TRIPMATE TSIP UBX USB AIVDM_DESC= Aivdm support ASHTECH_DESC= Ashtech support CPPBIND_DESC= Build C++ bindings EARTHMATE_DESC= DeLorme EarthMate Zodiac support EVERMORE_DESC= Evermore binary support FV18_DESC= San Jose Navigation FV-18 support GARMIN_DESC= Garmin kernel driver support GARMINTXT_DESC= Garmin Simple Text support GEOSTAR_DESC= Geostar Protocol support GPSCLOCK_DESC= GPSclock support GTK2_DESC= Install py-gtk2 (required for xgps & xgpsspeed) ITRAX_DESC= iTrax support MTK_DESC= MTK-3301 support NAVCOM_DESC= Navcom support NETFEED_DESC= Build support for handling TCP/IP data sources NMEA_DESC= NMEA support NTPSHM_DESC= NTP time hinting support NTRIP_DESC= NTRIP support OCEANSERVER_DESC= Oceanserver support OLDPROTO_DESC= Old (pre-JSON) protocol support in client lib ONCORE_DESC= Motorola OnCore chipset support PASSTHROUGH_DESC= Build support for passing through JSON PPS_DESC= PPS time syncing support PROFILING_DESC= Profiling support RECONFIGURE_DESC= Allow gpsd to change device settings RTCM104V2_DESC= rtcm104v2 support RTCM104V3_DESC= rtcm104v3 support SHMEXPORT_DESC= Enable export via shared memory SIRF_DESC= SiRF chipset support SOCKEXPORT_DESC= Enable export over sockets SUPERSTARII_DESC= SuperStarII support TIMING_DESC= Build latency timing support TNT_DESC= True North Technologies support TRIPMATE_DESC= DeLorme TripMate support TSIP_DESC= Trimble TSIP support QTBIND_DESC= build QT bindings UBX_DESC= UBX protocol support USB_DESC= libusb support for USB devices .include # Options related to GPS protocols .if ! ${PORT_OPTIONS:MNMEA} SCONS_ARGS+= nmea=no .endif .if ! ${PORT_OPTIONS:MASHTECH} SCONS_ARGS+= ashtech=no .endif .if ! ${PORT_OPTIONS:MEARTHMATE} SCONS_ARGS+= earthmate=no .endif .if ! ${PORT_OPTIONS:MEVERMORE} SCONS_ARGS+= evermore=no .endif .if ! ${PORT_OPTIONS:MFV18} SCONS_ARGS+= fv18=no .endif .if ! ${PORT_OPTIONS:MGARMIN} SCONS_ARGS+= garmin=no .endif .if ! ${PORT_OPTIONS:MGARMINTXT} SCONS_ARGS+= garmintxt=no .endif .if ! ${PORT_OPTIONS:MGEOSTAR} SCONS_ARGS+= geostar=no .endif .if ! ${PORT_OPTIONS:MITRAX} SCONS_ARGS+= itrax=no .endif .if ! ${PORT_OPTIONS:MMTK} SCONS_ARGS+= mtk3301=no .endif .if ! ${PORT_OPTIONS:MNAVCOM} SCONS_ARGS+= navcom=no .endif .if ! ${PORT_OPTIONS:MONCORE} SCONS_ARGS+= oncore=no .endif .if ! ${PORT_OPTIONS:MSIRF} SCONS_ARGS+= sirf=no .endif .if ! ${PORT_OPTIONS:MSUPERSTARII} SCONS_ARGS+= superstar2=no .endif .if ! ${PORT_OPTIONS:MTNT} SCONS_ARGS+= tnt=no .endif .if ! ${PORT_OPTIONS:MTRIPMATE} SCONS_ARGS+= tripmate=no .endif .if ! ${PORT_OPTIONS:MTSIP} SCONS_ARGS+= tsip=no .endif .if ! ${PORT_OPTIONS:MUBX} SCONS_ARGS+= ubx=no .endif # Options related to Non-GPS protocols .if ! ${PORT_OPTIONS:MAIVDM} SCONS_ARGS+= aivdm=no .endif .if ! ${PORT_OPTIONS:MGPSCLOCK} SCONS_ARGS+= gpsclock=no .endif .if ! ${PORT_OPTIONS:MNTRIP} SCONS_ARGS+= ntrip=no .endif .if ! ${PORT_OPTIONS:MOCEANSERVER} SCONS_ARGS+= oceanserver=no .endif .if ! ${PORT_OPTIONS:MRTCM104V2} SCONS_ARGS+= rtcm104v2=no .endif .if ! ${PORT_OPTIONS:MRTCM104V3} SCONS_ARGS+= rtcm104v3=no .endif # Time service .if ! ${PORT_OPTIONS:MNTPSHM} SCONS_ARGS+= ntpshm=no .endif .if ! ${PORT_OPTIONS:MPPS} SCONS_ARGS+= pps=no .else . if ! ${PORT_OPTIONS:MNTPSHM} IGNORE= PPS requires NTPSHM . endif .endif # Export methods .if ! ${PORT_OPTIONS:MSOCKEXPORT} SCONS_ARGS+= socket_export=no .endif .if ${PORT_OPTIONS:MDBUS} LIB_DEPENDS+= libdbus:${PORTSDIR}/devel/dbus \ libdbus-glib-1.so:${PORTSDIR}/devel/dbus-glib SCONS_ARGS+= dbus_export=yes .endif .if ! ${PORT_OPTIONS:MSHMEXPORT} SCONS_ARGS+= shm_export=no .endif # Communication .if ! ${PORT_OPTIONS:MUSB} SCONS_ARGS+= usb=no .endif .if ! ${PORT_OPTIONS:MIPV6} SCONS_ARGS+= ipv6=no .endif .if ! ${PORT_OPTIONS:MNETFEED} SCONS_ARGS+= netfeed=no .endif .if ! ${PORT_OPTIONS:MPASSTHROUGH} SCONS_ARGS+= passthrough=no .endif # Other daemon options .if ! ${PORT_OPTIONS:MTIMING} SCONS_ARGS+= timing=no .endif # Client-side options .if ! ${PORT_OPTIONS:MOLDPROTO} SCONS_ARGS+= oldstyle=no .endif .if ${PORT_OPTIONS:MQTBIND} USE_QT4= network SCONS_ARGS+= libQgpsmm=yes PLIST_SUB+= QTBIND="" .else SCONS_ARGS+= libQgpsmm=no PLIST_SUB+= QTBIND="@comment " .endif .if ! ${PORT_OPTIONS:MRECONFIGURE} SCONS_ARGS+= reconfigure=no .endif .if ! ${PORT_OPTIONS:MCPPBIND} SCONS_ARGS+= libgpsmm=no .endif # Build control .if ${PORT_OPTIONS:MPROFILING} SCONS_ARGS+= profiling=yes .endif # generates .py[co] files for installed modules # if that's not done, ${PYTHON_SITELIBDIR}/gps will be polluted # with these files when module is imported from root user post-install: (cd ${STAGEDIR}${PREFIX} && \ ${PYTHON_CMD} ${PYTHON_LIBDIR}/compileall.py \ -d ${PYTHONPREFIX_SITELIBDIR} -f ${PYTHONPREFIX_SITELIBDIR:S;${PREFIX}/;;} && \ ${PYTHON_CMD} -O ${PYTHON_LIBDIR}/compileall.py \ -d ${PYTHONPREFIX_SITELIBDIR} -f ${PYTHONPREFIX_SITELIBDIR:S;${PREFIX}/;;}) .include