[
{ type: install
  message: <<EOM
In order to use `ykman otp` commands, you need to make sure the uhid(4)
driver attaches to the USB device:

  # usbconfig -d ugenX.Y add_quirk UQ_KBD_IGNORE
  # usbconfig -d ugenX.Y reset

The correct device to operate on (ugenX.Y) can be determined using
`usbconfig list`.

When using FreeBSD 13 or higher, you can switch to the more modern
hidraw(4) driver. This allows YubiKey Manager to access OTP HID in a
non-exclusive way, so that the key will still function as a USB keyboard:

  # sysrc kld_list+="hidraw hkbd"
  # cat >>/boot/loader.conf<<EOF
  hw.usb.usbhid.enable="1"
  hw.usb.quirk.0="0x1050 0x0010 0 0xffff UQ_KBD_IGNORE"  # YKS_OTP
  hw.usb.quirk.1="0x1050 0x0110 0 0xffff UQ_KBD_IGNORE"  # NEO_OTP
  hw.usb.quirk.2="0x1050 0x0111 0 0xffff UQ_KBD_IGNORE"  # NEO_OTP_CCID
  hw.usb.quirk.3="0x1050 0x0114 0 0xffff UQ_KBD_IGNORE"  # NEO_OTP_FIDO
  hw.usb.quirk.4="0x1050 0x0116 0 0xffff UQ_KBD_IGNORE"  # NEO_OTP_FIDO_CCID
  hw.usb.quirk.5="0x1050 0x0401 0 0xffff UQ_KBD_IGNORE"  # YK4_OTP
  hw.usb.quirk.6="0x1050 0x0403 0 0xffff UQ_KBD_IGNORE"  # YK4_OTP_FIDO
  hw.usb.quirk.7="0x1050 0x0405 0 0xffff UQ_KBD_IGNORE"  # YK4_OTP_CCID
  hw.usb.quirk.8="0x1050 0x0407 0 0xffff UQ_KBD_IGNORE"  # YK4_OTP_FIDO_CCID
  hw.usb.quirk.9="0x1050 0x0410 0 0xffff UQ_KBD_IGNORE"  # YKP_OTP_FIDO
  EOF
  # reboot
EOM
}
]