Qualcomm Technologies EMAC Gigabit Ethernet Controller
This network controller consists of two devices: a MAC and an SGMII
internal PHY. Each device is represented by a device tree node. A phandle
connects the MAC node to its corresponding internal phy node. Another
phandle points to the external PHY node.
Required properties:
MAC node:
- compatible : Should be "qcom,fsm9900-emac".
- reg : Offset and length of the register regions for the device
- interrupts : Interrupt number used by this controller
- mac-address : The 6-byte MAC address. If present, it is the default
MAC address.
- internal-phy : phandle to the internal PHY node
- phy-handle : phandle the the external PHY node
Internal PHY node:
- compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".
- reg : Offset and length of the register region(s) for the device
- interrupts : Interrupt number used by this controller
The external phy child node:
- reg : The phy address
Example:
FSM9900:
soc {
#address-cells = <1>;
#size-cells = <1>;
emac0: ethernet@feb20000 {
compatible = "qcom,fsm9900-emac";
reg = <0xfeb20000 0x10000>,
<0xfeb36000 0x1000>;
interrupts = <76>;
clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
<&gcc 6>, <&gcc 7>;
clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
"mdio_clk", "tx_clk", "rx_clk", "sys_clk";
internal-phy = <&emac_sgmii>;
phy-handle = <&phy0>;
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
};
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins_a>;
};
emac_sgmii: ethernet@feb38000 {
compatible = "qcom,fsm9900-emac-sgmii";
reg = <0xfeb38000 0x1000>;
interrupts = <80>;
};
tlmm: pinctrl@fd510000 {
compatible = "qcom,fsm9900-pinctrl";
mdio_pins_a: mdio {
state {
pins = "gpio123", "gpio124";
function = "mdio";
};
};
};
QDF2432:
soc {
#address-cells = <2>;
#size-cells = <2>;
emac0: ethernet@38800000 {
compatible = "qcom,fsm9900-emac";
reg = <0x0 0x38800000 0x0 0x10000>,
<0x0 0x38816000 0x0 0x1000>;
interrupts = <0 256 4>;
clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
<&gcc 6>, <&gcc 7>;
clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
"mdio_clk", "tx_clk", "rx_clk", "sys_clk";
internal-phy = <&emac_sgmii>;
phy-handle = <&phy0>;
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@4 {
reg = <4>;
};
};
emac_sgmii: ethernet@410400 {
compatible = "qcom,qdf2432-emac-sgmii";
reg = <0x0 0x00410400 0x0 0xc00>, /* Base address */
<0x0 0x00410000 0x0 0x400>; /* Per-lane digital */
interrupts = <0 254 1>;
};
