**************************************************************************
* The following are notes regarding the overheads of running DTrace.
*
* $Id: ALLoverhead.txt 58 2007-10-01 13:36:29Z brendan $
*
* COPYRIGHT: Copyright (c) 2007 Brendan Gregg.
**************************************************************************
The following are notes regarding the overheads of running DTrace.
* What are the overheads of running DTrace?
Often negligible.
It depends what the DTrace script does, in particular, the frequency of
events that it is tracing.
The following tips should explain what the overheads probably are,
- if your script traces less than 1000 events per second, then the overhead
is probably negligible. ie, less than 0.1% CPU.
- if your script traces more than 100,000 events per second, then the
overhead will start to be significant. If you are tracing kernel events,
then perhaps this could be 10% per CPU. If you are tracing user land
application events, then the overhead can be greater than 30% per CPU.
- if your script produes pages of output, then the CPU cost of drawing
this output to the screen and rendering the fonts is usually far greater
than DTrace itself. Redirect the output of DTrace to a file in /tmp
("-o" or ">").
- a ballpark figure for the overhead of a DTrace probe would be 500 ns.
This can be much less (kernel only), or much more (many user to kerel
copyin()s); I've provided it to give you a very rough idea. Of course,
as CPUs become faster, this overhead will become smaller.
If overheads are a concern - then perform tests to measure their magnitude
for both your workload and the scripts applied, such as benchmarks with
and without DTrace running. Also read the scripts you are using, and
consider how frequent the probes will fire, and if you can customise the
script to reduce the frequency of probes.
For example, scripts that trace,
pid$target:::entry,
pid$target:::return
would usually cause significant performance overhead, since they fire two
probes for every function called (and can easily reach 100,000 per second).
You could reduce this by modifying the script to only trace the libraries
you are interested in. For example, if you were only interested in
libsocket and libnsl, then change the above lines wherever they appeared to,
pid$target:libsocket::entry,
pid$target:libsocket::return,
pid$target:libnsl::entry,
pid$target:libnsl::return
and you may notice the overheads are significantly reduced (especially anytime
you drop libc and libdl). To go further, only list functions of interest,
pid$target:libsocket:connect:entry,
pid$target:libsocket:connect:return,
pid$target:libsocket:listen:entry,
pid$target:libsocket:listen:return,
[...]
There are additional notes in Docs/Faq about the DTraceToolkit's scripts
and performance overhead.
* When are the overheads a problem?
When they are significant (due to frequent events), and you are tracing
in a production environment that is sensitive to additional CPU load.
Overheads should be considered if you are measuring times (delta, elapsed,
on-CPU, etc) for performance analysis. In practise, overheads aren't
that much of a problem -- the script will either identify your issues
correctly (great), or not (keep looking). Any it is usually easy to quickly
confirm what DTrace does find by using other tools, or by hacking quick
code changes. You might be using DTrace output that you know has a
significant margin of error - but that becomes moot after you prove that
the performance fix works through benchmarking a quick fix.
At the end of the day, if DTrace helps find real measurable performance wins
(and it should), then it has been successful.
* When are overheads not a problem?
When the script is not tracing extreamly frequent events.
Also, when you are in development and tracing events for troubleshooting
purposes (args to functions, for example), DTrace overheads are usually
not an issue at all.
