/*-
* Copyright (c) 2011 Sandvine Incorporated. All rights reserved.
* Copyright (c) 2002-2011 Andre Albsmeier <andre@albsmeier.net>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This software is derived from Andre Albsmeier's fwprog.c which contained
* the following note:
*
* Many thanks goes to Marc Frajola <marc@terasolutions.com> from
* TeraSolutions for the initial idea and his programme for upgrading
* the firmware of I*M DDYS drives.
*/
/*
* BEWARE:
*
* The fact that you see your favorite vendor listed below does not
* imply that your equipment won't break when you use this software
* with it. It only means that the firmware of at least one device type
* of each vendor listed has been programmed successfully using this code.
*
* The -s option simulates a download but does nothing apart from that.
* It can be used to check what chunk sizes would have been used with the
* specified device.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/stat.h>
#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <camlib.h>
#include "progress.h"
#include "camcontrol.h"
#define WB_TIMEOUT 50000 /* 50 seconds */
typedef enum {
VENDOR_HGST,
VENDOR_HITACHI,
VENDOR_HP,
VENDOR_IBM,
VENDOR_PLEXTOR,
VENDOR_QUALSTAR,
VENDOR_QUANTUM,
VENDOR_SAMSUNG,
VENDOR_SEAGATE,
VENDOR_SMART,
VENDOR_ATA,
VENDOR_UNKNOWN
} fw_vendor_t;
/*
* FW_TUR_READY: The drive must return good status for a test unit ready.
*
* FW_TUR_NOT_READY: The drive must return not ready status for a test unit
* ready. You may want this in a removable media drive.
*
* FW_TUR_NA: It doesn't matter whether the drive is ready or not.
* This may be the case for a removable media drive.
*/
typedef enum {
FW_TUR_NONE,
FW_TUR_READY,
FW_TUR_NOT_READY,
FW_TUR_NA
} fw_tur_status;
/*
* FW_TIMEOUT_DEFAULT: Attempt to probe for a WRITE BUFFER timeout
* value from the drive. If we get an answer,
* use the Recommended timeout. Otherwise,
* use the default value from the table.
*
* FW_TIMEOUT_DEV_REPORTED: The timeout value was probed directly from
* the device.
*
* FW_TIMEOUT_NO_PROBE: Do not ask the device for a WRITE BUFFER
* timeout value. Use the device-specific
* value.
*
* FW_TIMEOUT_USER_SPEC: The user specified a timeout on the command
* line with the -t option. This overrides any
* probe or default timeout.
*/
typedef enum {
FW_TIMEOUT_DEFAULT,
FW_TIMEOUT_DEV_REPORTED,
FW_TIMEOUT_NO_PROBE,
FW_TIMEOUT_USER_SPEC
} fw_timeout_type;
/*
* type: Enumeration for the particular vendor.
*
* pattern: Pattern to match for the Vendor ID from the SCSI
* Inquiry data.
*
* dev_type: SCSI device type to match, or T_ANY to match any
* device from the given vendor. Note that if there
* is a specific device type listed for a particular
* vendor, it must be listed before a T_ANY entry.
*
* max_pkt_size: Maximum packet size when talking to a device. Note
* that although large data sizes may be supported by
* the target device, they may not be supported by the
* OS or the controller.
*
* cdb_byte2: This specifies byte 2 (byte 1 when counting from 0)
* of the CDB. This is generally the WRITE BUFFER mode.
*
* cdb_byte2_last: This specifies byte 2 for the last chunk of the
* download.
*
* inc_cdb_buffer_id: Increment the buffer ID by 1 for each chunk sent
* down to the drive.
*
* inc_cdb_offset: Increment the offset field in the CDB with the byte
* offset into the firmware file.
*
* tur_status: Pay attention to whether the device is ready before
* upgrading the firmware, or not. See above for the
* values.
*/
struct fw_vendor {
fw_vendor_t type;
const char *pattern;
int dev_type;
int max_pkt_size;
u_int8_t cdb_byte2;
u_int8_t cdb_byte2_last;
int inc_cdb_buffer_id;
int inc_cdb_offset;
fw_tur_status tur_status;
int timeout_ms;
fw_timeout_type timeout_type;
};
/*
* Vendor notes:
*
* HGST: The packets need to be sent in multiples of 4K.
*
* IBM: For LTO and TS drives, the buffer ID is ignored in mode 7 (and
* some other modes). It treats the request as a firmware download.
* The offset (and therefore the length of each chunk sent) needs
* to be a multiple of the offset boundary specified for firmware
* (buffer ID 4) in the read buffer command. At least for LTO-6,
* that seems to be 0, but using a 32K chunk size should satisfy
* most any alignment requirement.
*
* SmrtStor: Mode 5 is also supported, but since the firmware is 400KB or
* so, we can't fit it in a single request in most cases.
*/
static struct fw_vendor vendors_list[] = {
{VENDOR_HGST, "HGST", T_DIRECT,
0x1000, 0x07, 0x07, 1, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_HITACHI, "HITACHI", T_ANY,
0x8000, 0x05, 0x05, 1, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_HP, "HP", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_IBM, "IBM", T_SEQUENTIAL,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_NA, 300 * 1000, FW_TIMEOUT_DEFAULT},
{VENDOR_IBM, "IBM", T_ANY,
0x8000, 0x05, 0x05, 1, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_PLEXTOR, "PLEXTOR", T_ANY,
0x2000, 0x04, 0x05, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_QUALSTAR, "QUALSTAR", T_ANY,
0x2030, 0x05, 0x05, 0, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_QUANTUM, "QUANTUM", T_ANY,
0x2000, 0x04, 0x05, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_SAMSUNG, "SAMSUNG", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_SEAGATE, "SEAGATE", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_SMART, "SmrtStor", T_DIRECT,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
/*
* We match any ATA device. This is really just a placeholder,
* since we won't actually send a WRITE BUFFER with any of the
* listed parameters. If a SATA device is behind a SAS controller,
* the SCSI to ATA translation code (at least for LSI) doesn't
* generally translate a SCSI WRITE BUFFER into an ATA DOWNLOAD
* MICROCODE command. So, we use the SCSI ATA PASS_THROUGH command
* to send the ATA DOWNLOAD MICROCODE command instead.
*/
{VENDOR_ATA, "ATA", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT,
FW_TIMEOUT_NO_PROBE},
{VENDOR_UNKNOWN, NULL, T_ANY,
0x0000, 0x00, 0x00, 0, 0, FW_TUR_NONE, WB_TIMEOUT, FW_TIMEOUT_DEFAULT}
};
struct fw_timeout_desc {
fw_timeout_type timeout_type;
const char *timeout_desc;
};
static const struct fw_timeout_desc fw_timeout_desc_table[] = {
{ FW_TIMEOUT_DEFAULT, "the default" },
{ FW_TIMEOUT_DEV_REPORTED, "recommended by this particular device" },
{ FW_TIMEOUT_NO_PROBE, "the default" },
{ FW_TIMEOUT_USER_SPEC, "what was specified on the command line" }
};
#ifndef ATA_DOWNLOAD_MICROCODE
#define ATA_DOWNLOAD_MICROCODE 0x92
#endif
#define USE_OFFSETS_FEATURE 0x3
#ifndef LOW_SECTOR_SIZE
#define LOW_SECTOR_SIZE 512
#endif
#define ATA_MAKE_LBA(o, p) \
((((((o) / LOW_SECTOR_SIZE) >> 8) & 0xff) << 16) | \
((((o) / LOW_SECTOR_SIZE) & 0xff) << 8) | \
((((p) / LOW_SECTOR_SIZE) >> 8) & 0xff))
#define ATA_MAKE_SECTORS(p) (((p) / 512) & 0xff)
#ifndef UNKNOWN_MAX_PKT_SIZE
#define UNKNOWN_MAX_PKT_SIZE 0x8000
#endif
static struct fw_vendor *fw_get_vendor(struct cam_device *cam_dev,
struct ata_params *ident_buf);
static int fw_get_timeout(struct cam_device *cam_dev, struct fw_vendor *vp,
int retry_count, int timeout);
static int fw_validate_ibm(struct cam_device *dev, int retry_count,
int timeout, int fd, char *buf,
const char *fw_img_path, int quiet);
static char *fw_read_img(struct cam_device *dev, int retry_count,
int timeout, int quiet, const char *fw_img_path,
struct fw_vendor *vp, int *num_bytes);
static int fw_check_device_ready(struct cam_device *dev,
camcontrol_devtype devtype,
struct fw_vendor *vp, int printerrors,
int timeout);
static int fw_download_img(struct cam_device *cam_dev,
struct fw_vendor *vp, char *buf, int img_size,
int sim_mode, int printerrors, int quiet,
int retry_count, int timeout, const char */*name*/,
camcontrol_devtype devtype);
/*
* Find entry in vendors list that belongs to
* the vendor of given cam device.
*/
static struct fw_vendor *
fw_get_vendor(struct cam_device *cam_dev, struct ata_params *ident_buf)
{
char vendor[42];
struct fw_vendor *vp;
if (cam_dev == NULL)
return (NULL);
if (ident_buf != NULL) {
cam_strvis((u_char *)vendor, ident_buf->model,
sizeof(ident_buf->model), sizeof(vendor));
for (vp = vendors_list; vp->pattern != NULL; vp++) {
if (vp->type == VENDOR_ATA)
return (vp);
}
} else {
cam_strvis((u_char *)vendor, (u_char *)cam_dev->inq_data.vendor,
sizeof(cam_dev->inq_data.vendor), sizeof(vendor));
}
for (vp = vendors_list; vp->pattern != NULL; vp++) {
if (!cam_strmatch((const u_char *)vendor,
(const u_char *)vp->pattern, strlen(vendor))) {
if ((vp->dev_type == T_ANY)
|| (vp->dev_type == SID_TYPE(&cam_dev->inq_data)))
break;
}
}
return (vp);
}
static int
fw_get_timeout(struct cam_device *cam_dev, struct fw_vendor *vp,
int retry_count, int timeout)
{
struct scsi_report_supported_opcodes_one *one;
struct scsi_report_supported_opcodes_timeout *td;
uint8_t *buf = NULL;
uint32_t fill_len = 0, cdb_len = 0, rec_timeout = 0;
int retval = 0;
/*
* If the user has specified a timeout on the command line, we let
* him override any default or probed value.
*/
if (timeout != 0) {
vp->timeout_type = FW_TIMEOUT_USER_SPEC;
vp->timeout_ms = timeout;
goto bailout;
}
/*
* Check to see whether we should probe for a timeout for this
* device.
*/
if (vp->timeout_type == FW_TIMEOUT_NO_PROBE)
goto bailout;
retval = scsigetopcodes(/*device*/ cam_dev,
/*opcode_set*/ 1,
/*opcode*/ WRITE_BUFFER,
/*show_sa_errors*/ 1,
/*sa_set*/ 0,
/*service_action*/ 0,
/*timeout_desc*/ 1,
/*retry_count*/ retry_count,
/*timeout*/ 10000,
/*verbose*/ 0,
/*fill_len*/ &fill_len,
/*data_ptr*/ &buf);
/*
* It isn't an error if we can't get a timeout descriptor. We just
* continue on with the default timeout.
*/
if (retval != 0) {
retval = 0;
goto bailout;
}
/*
* Even if the drive didn't return a SCSI error, if we don't have
* enough data to contain the one opcode descriptor, the CDB
* structure and a timeout descriptor, we don't have the timeout
* value we're looking for. So we'll just fall back to the
* default value.
*/
if (fill_len < (sizeof(*one) + sizeof(struct scsi_write_buffer) +
sizeof(*td)))
goto bailout;
one = (struct scsi_report_supported_opcodes_one *)buf;
/*
* If the drive claims to not support the WRITE BUFFER command...
* fall back to the default timeout value and let things fail on
* the actual firmware download.
*/
if ((one->support & RSO_ONE_SUP_MASK) == RSO_ONE_SUP_NOT_SUP)
goto bailout;
cdb_len = scsi_2btoul(one->cdb_length);
td = (struct scsi_report_supported_opcodes_timeout *)
&buf[sizeof(*one) + cdb_len];
rec_timeout = scsi_4btoul(td->recommended_time);
/*
* If the recommended timeout is 0, then the device has probably
* returned a bogus value.
*/
if (rec_timeout == 0)
goto bailout;
/* CAM timeouts are in ms */
rec_timeout *= 1000;
vp->timeout_ms = rec_timeout;
vp->timeout_type = FW_TIMEOUT_DEV_REPORTED;
bailout:
return (retval);
}
#define SVPD_IBM_FW_DESIGNATION 0x03
/*
* IBM LTO and TS tape drives have an INQUIRY VPD page 0x3 with the following
* format:
*/
struct fw_ibm_tape_fw_designation {
uint8_t device;
uint8_t page_code;
uint8_t reserved;
uint8_t length;
uint8_t ascii_length;
uint8_t reserved2[3];
uint8_t load_id[4];
uint8_t fw_rev[4];
uint8_t ptf_number[4];
uint8_t patch_number[4];
uint8_t ru_name[8];
uint8_t lib_seq_num[5];
};
/*
* The firmware for IBM tape drives has the following header format. The
* load_id and ru_name in the header file should match what is returned in
* VPD page 0x3.
*/
struct fw_ibm_tape_fw_header {
uint8_t unspec[4];
uint8_t length[4]; /* Firmware and header! */
uint8_t load_id[4];
uint8_t fw_rev[4];
uint8_t reserved[8];
uint8_t ru_name[8];
};
static int
fw_validate_ibm(struct cam_device *dev, int retry_count, int timeout, int fd,
char *buf, const char *fw_img_path, int quiet)
{
union ccb *ccb;
struct fw_ibm_tape_fw_designation vpd_page;
struct fw_ibm_tape_fw_header *header;
char drive_rev[sizeof(vpd_page.fw_rev) + 1];
char file_rev[sizeof(vpd_page.fw_rev) + 1];
int retval = 1;
ccb = cam_getccb(dev);
if (ccb == NULL) {
warnx("couldn't allocate CCB");
goto bailout;
}
/* cam_getccb cleans up the header, caller has to zero the payload */
bzero(&(&ccb->ccb_h)[1],
sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr));
bzero(&vpd_page, sizeof(vpd_page));
scsi_inquiry(&ccb->csio,
/*retries*/ retry_count,
/*cbfcnp*/ NULL,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* inq_buf */ (u_int8_t *)&vpd_page,
/* inq_len */ sizeof(vpd_page),
/* evpd */ 1,
/* page_code */ SVPD_IBM_FW_DESIGNATION,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ timeout ? timeout : 5000);
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (retry_count != 0)
ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
if (cam_send_ccb(dev, ccb) < 0) {
warn("error getting firmware designation page");
cam_error_print(dev, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
cam_freeccb(ccb);
ccb = NULL;
goto bailout;
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
cam_error_print(dev, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
goto bailout;
}
/*
* Read the firmware header only.
*/
if (read(fd, buf, sizeof(*header)) != sizeof(*header)) {
warn("unable to read %zu bytes from %s", sizeof(*header),
fw_img_path);
goto bailout;
}
/* Rewind the file back to 0 for the full file read. */
if (lseek(fd, 0, SEEK_SET) == -1) {
warn("Unable to lseek");
goto bailout;
}
header = (struct fw_ibm_tape_fw_header *)buf;
bzero(drive_rev, sizeof(drive_rev));
bcopy(vpd_page.fw_rev, drive_rev, sizeof(vpd_page.fw_rev));
bzero(file_rev, sizeof(file_rev));
bcopy(header->fw_rev, file_rev, sizeof(header->fw_rev));
if (quiet == 0) {
fprintf(stdout, "Current Drive Firmware version: %s\n",
drive_rev);
fprintf(stdout, "Firmware File version: %s\n", file_rev);
}
/*
* For IBM tape drives the load ID and RU name reported by the
* drive should match what is in the firmware file.
*/
if (bcmp(vpd_page.load_id, header->load_id,
MIN(sizeof(vpd_page.load_id), sizeof(header->load_id))) != 0) {
warnx("Drive Firmware load ID 0x%x does not match firmware "
"file load ID 0x%x", scsi_4btoul(vpd_page.load_id),
scsi_4btoul(header->load_id));
goto bailout;
}
if (bcmp(vpd_page.ru_name, header->ru_name,
MIN(sizeof(vpd_page.ru_name), sizeof(header->ru_name))) != 0) {
warnx("Drive Firmware RU name 0x%jx does not match firmware "
"file RU name 0x%jx",
(uintmax_t)scsi_8btou64(vpd_page.ru_name),
(uintmax_t)scsi_8btou64(header->ru_name));
goto bailout;
}
if (quiet == 0)
fprintf(stdout, "Firmware file is valid for this drive.\n");
retval = 0;
bailout:
if (ccb != NULL)
cam_freeccb(ccb);
return (retval);
}
/*
* Allocate a buffer and read fw image file into it
* from given path. Number of bytes read is stored
* in num_bytes.
*/
static char *
fw_read_img(struct cam_device *dev, int retry_count, int timeout, int quiet,
const char *fw_img_path, struct fw_vendor *vp, int *num_bytes)
{
int fd;
struct stat stbuf;
char *buf;
off_t img_size;
int skip_bytes = 0;
if ((fd = open(fw_img_path, O_RDONLY)) < 0) {
warn("Could not open image file %s", fw_img_path);
return (NULL);
}
if (fstat(fd, &stbuf) < 0) {
warn("Could not stat image file %s", fw_img_path);
goto bailout1;
}
if ((img_size = stbuf.st_size) == 0) {
warnx("Zero length image file %s", fw_img_path);
goto bailout1;
}
if ((buf = malloc(img_size)) == NULL) {
warnx("Could not allocate buffer to read image file %s",
fw_img_path);
goto bailout1;
}
/* Skip headers if applicable. */
switch (vp->type) {
case VENDOR_SEAGATE:
if (read(fd, buf, 16) != 16) {
warn("Could not read image file %s", fw_img_path);
goto bailout;
}
if (lseek(fd, 0, SEEK_SET) == -1) {
warn("Unable to lseek");
goto bailout;
}
if ((strncmp(buf, "SEAGATE,SEAGATE ", 16) == 0) ||
(img_size % 512 == 80))
skip_bytes = 80;
break;
case VENDOR_QUALSTAR:
skip_bytes = img_size % 1030;
break;
case VENDOR_IBM: {
if (vp->dev_type != T_SEQUENTIAL)
break;
if (fw_validate_ibm(dev, retry_count, timeout, fd, buf,
fw_img_path, quiet) != 0)
goto bailout;
break;
}
default:
break;
}
if (skip_bytes != 0) {
fprintf(stdout, "Skipping %d byte header.\n", skip_bytes);
if (lseek(fd, skip_bytes, SEEK_SET) == -1) {
warn("Could not lseek");
goto bailout;
}
img_size -= skip_bytes;
}
/* Read image into a buffer. */
if (read(fd, buf, img_size) != img_size) {
warn("Could not read image file %s", fw_img_path);
goto bailout;
}
*num_bytes = img_size;
close(fd);
return (buf);
bailout:
free(buf);
bailout1:
close(fd);
*num_bytes = 0;
return (NULL);
}
/*
* Returns 0 for "success", where success means that the device has met the
* requirement in the vendor structure for being ready or not ready when
* firmware is downloaded.
*
* Returns 1 for a failure to be ready to accept a firmware download.
* (e.g., a drive needs to be ready, but returns not ready)
*
* Returns -1 for any other failure.
*/
static int
fw_check_device_ready(struct cam_device *dev, camcontrol_devtype devtype,
struct fw_vendor *vp, int printerrors, int timeout)
{
union ccb *ccb;
int retval = 0;
int16_t *ptr = NULL;
size_t dxfer_len = 0;
if ((ccb = cam_getccb(dev)) == NULL) {
warnx("Could not allocate CCB");
retval = -1;
goto bailout;
}
bzero(&(&ccb->ccb_h)[1],
sizeof(union ccb) - sizeof(struct ccb_hdr));
if (devtype != CC_DT_SCSI) {
dxfer_len = sizeof(struct ata_params);
ptr = (uint16_t *)malloc(dxfer_len);
if (ptr == NULL) {
warnx("can't malloc memory for identify");
retval = -1;
goto bailout;
}
bzero(ptr, dxfer_len);
}
switch (devtype) {
case CC_DT_SCSI:
scsi_test_unit_ready(&ccb->csio,
/*retries*/ 0,
/*cbfcnp*/ NULL,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ 5000);
break;
case CC_DT_ATA_BEHIND_SCSI:
case CC_DT_ATA: {
build_ata_cmd(ccb,
/*retries*/ 1,
/*flags*/ CAM_DIR_IN,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*protocol*/ AP_PROTO_PIO_IN,
/*ata_flags*/ AP_FLAG_BYT_BLOK_BYTES |
AP_FLAG_TLEN_SECT_CNT |
AP_FLAG_TDIR_FROM_DEV,
/*features*/ 0,
/*sector_count*/ (uint8_t) dxfer_len,
/*lba*/ 0,
/*command*/ ATA_ATA_IDENTIFY,
/*data_ptr*/ (uint8_t *)ptr,
/*dxfer_len*/ dxfer_len,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ timeout ? timeout : 30 * 1000,
/*is48bit*/ 0,
/*devtype*/ devtype);
break;
}
default:
warnx("Unknown disk type %d", devtype);
retval = -1;
goto bailout;
break; /*NOTREACHED*/
}
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
retval = cam_send_ccb(dev, ccb);
if (retval != 0) {
warn("error sending %s CCB", (devtype == CC_DT_SCSI) ?
"Test Unit Ready" : "Identify");
retval = -1;
goto bailout;
}
if (((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
&& (vp->tur_status == FW_TUR_READY)) {
warnx("Device is not ready");
if (printerrors)
cam_error_print(dev, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
retval = 1;
goto bailout;
} else if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
&& (vp->tur_status == FW_TUR_NOT_READY)) {
warnx("Device cannot have media loaded when firmware is "
"downloaded");
retval = 1;
goto bailout;
}
bailout:
if (ccb != NULL)
cam_freeccb(ccb);
return (retval);
}
/*
* Download firmware stored in buf to cam_dev. If simulation mode
* is enabled, only show what packet sizes would be sent to the
* device but do not sent any actual packets
*/
static int
fw_download_img(struct cam_device *cam_dev, struct fw_vendor *vp,
char *buf, int img_size, int sim_mode, int printerrors, int quiet,
int retry_count, int timeout, const char *imgname,
camcontrol_devtype devtype)
{
struct scsi_write_buffer cdb;
progress_t progress;
int size = 0;
union ccb *ccb = NULL;
int pkt_count = 0;
int max_pkt_size;
u_int32_t pkt_size = 0;
char *pkt_ptr = buf;
u_int32_t offset;
int last_pkt = 0;
int retval = 0;
/*
* Check to see whether the device is ready to accept a firmware
* download.
*/
retval = fw_check_device_ready(cam_dev, devtype, vp, printerrors,
timeout);
if (retval != 0)
goto bailout;
if ((ccb = cam_getccb(cam_dev)) == NULL) {
warnx("Could not allocate CCB");
retval = 1;
goto bailout;
}
bzero(&(&ccb->ccb_h)[1],
sizeof(union ccb) - sizeof(struct ccb_hdr));
max_pkt_size = vp->max_pkt_size;
if (max_pkt_size == 0)
max_pkt_size = UNKNOWN_MAX_PKT_SIZE;
pkt_size = max_pkt_size;
progress_init(&progress, imgname, size = img_size);
/* Download single fw packets. */
do {
if (img_size <= max_pkt_size) {
last_pkt = 1;
pkt_size = img_size;
}
progress_update(&progress, size - img_size);
if (((sim_mode == 0) && (quiet == 0))
|| ((sim_mode != 0) && (printerrors == 0)))
progress_draw(&progress);
bzero(&cdb, sizeof(cdb));
switch (devtype) {
case CC_DT_SCSI:
cdb.opcode = WRITE_BUFFER;
cdb.control = 0;
/* Parameter list length. */
scsi_ulto3b(pkt_size, &cdb.length[0]);
offset = vp->inc_cdb_offset ? (pkt_ptr - buf) : 0;
scsi_ulto3b(offset, &cdb.offset[0]);
cdb.byte2 = last_pkt ? vp->cdb_byte2_last :
vp->cdb_byte2;
cdb.buffer_id = vp->inc_cdb_buffer_id ? pkt_count : 0;
/* Zero out payload of ccb union after ccb header. */
bzero(&(&ccb->ccb_h)[1],
sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr));
/*
* Copy previously constructed cdb into ccb_scsiio
* struct.
*/
bcopy(&cdb, &ccb->csio.cdb_io.cdb_bytes[0],
sizeof(struct scsi_write_buffer));
/* Fill rest of ccb_scsiio struct. */
cam_fill_csio(&ccb->csio, /* ccb_scsiio*/
retry_count, /* retries*/
NULL, /* cbfcnp*/
CAM_DIR_OUT | CAM_DEV_QFRZDIS, /* flags*/
CAM_TAG_ACTION_NONE, /* tag_action*/
(u_char *)pkt_ptr, /* data_ptr*/
pkt_size, /* dxfer_len*/
SSD_FULL_SIZE, /* sense_len*/
sizeof(struct scsi_write_buffer), /* cdb_len*/
timeout ? timeout : WB_TIMEOUT); /* timeout*/
break;
case CC_DT_ATA:
case CC_DT_ATA_BEHIND_SCSI: {
uint32_t off;
off = (uint32_t)(pkt_ptr - buf);
build_ata_cmd(ccb,
/*retry_count*/ retry_count,
/*flags*/ CAM_DIR_OUT | CAM_DEV_QFRZDIS,
/*tag_action*/ CAM_TAG_ACTION_NONE,
/*protocol*/ AP_PROTO_PIO_OUT,
/*ata_flags*/ AP_FLAG_BYT_BLOK_BYTES |
AP_FLAG_TLEN_SECT_CNT |
AP_FLAG_TDIR_TO_DEV,
/*features*/ USE_OFFSETS_FEATURE,
/*sector_count*/ ATA_MAKE_SECTORS(pkt_size),
/*lba*/ ATA_MAKE_LBA(off, pkt_size),
/*command*/ ATA_DOWNLOAD_MICROCODE,
/*data_ptr*/ (uint8_t *)pkt_ptr,
/*dxfer_len*/ pkt_size,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ timeout ? timeout : WB_TIMEOUT,
/*is48bit*/ 0,
/*devtype*/ devtype);
break;
}
default:
warnx("Unknown device type %d", devtype);
retval = 1;
goto bailout;
break; /*NOTREACHED*/
}
if (!sim_mode) {
/* Execute the command. */
if (cam_send_ccb(cam_dev, ccb) < 0 ||
(ccb->ccb_h.status & CAM_STATUS_MASK) !=
CAM_REQ_CMP) {
warnx("Error writing image to device");
if (printerrors)
cam_error_print(cam_dev, ccb,
CAM_ESF_ALL, CAM_EPF_ALL, stderr);
retval = 1;
goto bailout;
}
} else if (printerrors) {
cam_error_print(cam_dev, ccb, CAM_ESF_COMMAND, 0,
stdout);
}
/* Prepare next round. */
pkt_count++;
pkt_ptr += pkt_size;
img_size -= pkt_size;
} while(!last_pkt);
bailout:
if (quiet == 0)
progress_complete(&progress, size - img_size);
if (ccb != NULL)
cam_freeccb(ccb);
return (retval);
}
int
fwdownload(struct cam_device *device, int argc, char **argv,
char *combinedopt, int printerrors, int retry_count, int timeout)
{
struct fw_vendor *vp;
char *fw_img_path = NULL;
struct ata_params *ident_buf = NULL;
camcontrol_devtype devtype;
char *buf = NULL;
int img_size;
int c;
int sim_mode = 0;
int confirmed = 0;
int quiet = 0;
int retval = 0;
while ((c = getopt(argc, argv, combinedopt)) != -1) {
switch (c) {
case 'f':
fw_img_path = optarg;
break;
case 'q':
quiet = 1;
break;
case 's':
sim_mode = 1;
break;
case 'y':
confirmed = 1;
break;
default:
break;
}
}
if (fw_img_path == NULL)
errx(1, "you must specify a firmware image file using -f "
"option");
retval = get_device_type(device, retry_count, timeout, printerrors,
&devtype);
if (retval != 0)
errx(1, "Unable to determine device type");
if ((devtype == CC_DT_ATA)
|| (devtype == CC_DT_ATA_BEHIND_SCSI)) {
union ccb *ccb;
ccb = cam_getccb(device);
if (ccb == NULL) {
warnx("couldn't allocate CCB");
retval = 1;
goto bailout;
}
if (ata_do_identify(device, retry_count, timeout, ccb,
&ident_buf) != 0) {
cam_freeccb(ccb);
retval = 1;
goto bailout;
}
} else if (devtype != CC_DT_SCSI)
errx(1, "Unsupported device type %d", devtype);
vp = fw_get_vendor(device, ident_buf);
/*
* Bail out if we have an unknown vendor and this isn't an ATA
* disk. For a SCSI disk, we have no chance of working properly
* with the default values in the VENDOR_UNKNOWN case. For an ATA
* disk connected via an ATA transport, we may work for drives that
* support the ATA_DOWNLOAD_MICROCODE command.
*/
if (((vp == NULL)
|| (vp->type == VENDOR_UNKNOWN))
&& (devtype == CC_DT_SCSI))
errx(1, "Unsupported device");
retval = fw_get_timeout(device, vp, retry_count, timeout);
if (retval != 0) {
warnx("Unable to get a firmware download timeout value");
goto bailout;
}
buf = fw_read_img(device, retry_count, timeout, quiet, fw_img_path,
vp, &img_size);
if (buf == NULL) {
retval = 1;
goto bailout;
}
if (!confirmed) {
fprintf(stdout, "You are about to download firmware image (%s)"
" into the following device:\n",
fw_img_path);
if (devtype == CC_DT_SCSI) {
if (scsidoinquiry(device, argc, argv, combinedopt, 0,
5000) != 0) {
warnx("Error sending inquiry");
retval = 1;
goto bailout;
}
} else {
printf("%s%d: ", device->device_name,
device->dev_unit_num);
ata_print_ident(ident_buf);
camxferrate(device);
free(ident_buf);
}
fprintf(stdout, "Using a timeout of %u ms, which is %s.\n",
vp->timeout_ms,
fw_timeout_desc_table[vp->timeout_type].timeout_desc);
fprintf(stdout, "\nIt may damage your drive. ");
if (!get_confirmation()) {
retval = 1;
goto bailout;
}
}
if ((sim_mode != 0) && (quiet == 0))
fprintf(stdout, "Running in simulation mode\n");
if (fw_download_img(device, vp, buf, img_size, sim_mode, printerrors,
quiet, retry_count, vp->timeout_ms, fw_img_path, devtype) != 0) {
fprintf(stderr, "Firmware download failed\n");
retval = 1;
goto bailout;
} else if (quiet == 0)
fprintf(stdout, "Firmware download successful\n");
bailout:
free(buf);
return (retval);
}
