/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2013 Garrett D'Amore <garrett@damore.org>
*
* Copyright 2006 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#ifndef _SYS_FEATURE_TESTS_H
#define _SYS_FEATURE_TESTS_H
#include <sys/ccompile.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Values of _POSIX_C_SOURCE
*
* undefined not a POSIX compilation
* 1 POSIX.1-1990 compilation
* 2 POSIX.2-1992 compilation
* 199309L POSIX.1b-1993 compilation (Real Time)
* 199506L POSIX.1c-1995 compilation (POSIX Threads)
* 200112L POSIX.1-2001 compilation (Austin Group Revision)
* 200809L POSIX.1-2008 compilation
*/
#if defined(_POSIX_SOURCE) && !defined(_POSIX_C_SOURCE)
#define _POSIX_C_SOURCE 1
#endif
/*
* The feature test macros __XOPEN_OR_POSIX, _STRICT_STDC, _STRICT_SYMBOLS,
* and _STDC_C99 are Sun implementation specific macros created in order to
* compress common standards specified feature test macros for easier reading.
* These macros should not be used by the application developer as
* unexpected results may occur. Instead, the user should reference
* standards(5) for correct usage of the standards feature test macros.
*
* __XOPEN_OR_POSIX Used in cases where a symbol is defined by both
* X/Open or POSIX or in the negative, when neither
* X/Open or POSIX defines a symbol.
*
* _STRICT_STDC __STDC__ is specified by the C Standards and defined
* by the compiler. For Sun compilers the value of
* __STDC__ is either 1, 0, or not defined based on the
* compilation mode (see cc(1)). When the value of
* __STDC__ is 1 and in the absence of any other feature
* test macros, the namespace available to the application
* is limited to only those symbols defined by the C
* Standard. _STRICT_STDC provides a more readable means
* of identifying symbols defined by the standard, or in
* the negative, symbols that are extensions to the C
* Standard. See additional comments for GNU C differences.
*
* _STDC_C99 __STDC_VERSION__ is specified by the C standards and
* defined by the compiler and indicates the version of
* the C standard. A value of 199901L indicates a
* compiler that complies with ISO/IEC 9899:1999, other-
* wise known as the C99 standard.
*
* _STRICT_SYMBOLS Used in cases where symbol visibility is restricted
* by the standards, and the user has not explicitly
* relaxed the strictness via __EXTENSIONS__.
*/
#if defined(_XOPEN_SOURCE) || defined(_POSIX_C_SOURCE)
#define __XOPEN_OR_POSIX
#endif
/*
* ISO/IEC 9899:1990 and it's revision, ISO/IEC 9899:1999 specify the
* following predefined macro name:
*
* __STDC__ The integer constant 1, intended to indicate a conforming
* implementation.
*
* Furthermore, a strictly conforming program shall use only those features
* of the language and library specified in these standards. A conforming
* implementation shall accept any strictly conforming program.
*
* Based on these requirements, Sun's C compiler defines __STDC__ to 1 for
* strictly conforming environments and __STDC__ to 0 for environments that
* use ANSI C semantics but allow extensions to the C standard. For non-ANSI
* C semantics, Sun's C compiler does not define __STDC__.
*
* The GNU C project interpretation is that __STDC__ should always be defined
* to 1 for compilation modes that accept ANSI C syntax regardless of whether
* or not extensions to the C standard are used. Violations of conforming
* behavior are conditionally flagged as warnings via the use of the
* -pedantic option. In addition to defining __STDC__ to 1, the GNU C
* compiler also defines __STRICT_ANSI__ as a means of specifying strictly
* conforming environments using the -ansi or -std=<standard> options.
*
* In the absence of any other compiler options, Sun and GNU set the value
* of __STDC__ as follows when using the following options:
*
* Value of __STDC__ __STRICT_ANSI__
*
* cc -Xa (default) 0 undefined
* cc -Xt (transitional) 0 undefined
* cc -Xc (strictly conforming) 1 undefined
* cc -Xs (K&R C) undefined undefined
*
* gcc (default) 1 undefined
* gcc -ansi, -std={c89, c99,...) 1 defined
* gcc -traditional (K&R) undefined undefined
*
* The default compilation modes for Sun C compilers versus GNU C compilers
* results in a differing value for __STDC__ which results in a more
* restricted namespace when using Sun compilers. To allow both GNU and Sun
* interpretations to peacefully co-exist, we use the following Sun
* implementation _STRICT_STDC_ macro:
*/
#if (__STDC__ - 0 == 1 && !defined(__GNUC__)) || \
(defined(__GNUC__) && defined(__STRICT_ANSI__))
#define _STRICT_STDC
#else
#undef _STRICT_STDC
#endif
/*
* Compiler complies with ISO/IEC 9899:1999
*/
#if __STDC_VERSION__ - 0 >= 199901L
#ifndef _STDC_C99
#define _STDC_C99
#endif
#endif
/*
* Use strict symbol visibility.
*/
#if (defined(_STRICT_STDC) || defined(__XOPEN_OR_POSIX)) && \
!defined(__EXTENSIONS__)
#define _STRICT_SYMBOLS
#endif
/*
* Large file interfaces:
*
* _LARGEFILE_SOURCE
* 1 large file-related additions to POSIX
* interfaces requested (fseeko, etc.)
* _LARGEFILE64_SOURCE
* 1 transitional large-file-related interfaces
* requested (seek64, stat64, etc.)
*
* The corresponding announcement macros are respectively:
* _LFS_LARGEFILE
* _LFS64_LARGEFILE
* (These are set in <unistd.h>.)
*
* Requesting _LARGEFILE64_SOURCE implies requesting _LARGEFILE_SOURCE as
* well.
*
* The large file interfaces are made visible regardless of the initial values
* of the feature test macros under certain circumstances:
* - If no explicit standards-conforming environment is requested (neither
* of _POSIX_SOURCE nor _XOPEN_SOURCE is defined and the value of
* __STDC__ does not imply standards conformance).
* - Extended system interfaces are explicitly requested (__EXTENSIONS__
* is defined).
* - Access to in-kernel interfaces is requested (_KERNEL or _KMEMUSER is
* defined). (Note that this dependency is an artifact of the current
* kernel implementation and may change in future releases.)
*/
#if (!defined(_STRICT_STDC) && !defined(__XOPEN_OR_POSIX)) || \
defined(_KERNEL) || defined(_KMEMUSER) || \
defined(__EXTENSIONS__)
#undef _LARGEFILE64_SOURCE
#define _LARGEFILE64_SOURCE 1
#endif
#if _LARGEFILE64_SOURCE - 0 == 1
#undef _LARGEFILE_SOURCE
#define _LARGEFILE_SOURCE 1
#endif
/*
* Large file compilation environment control:
*
* The setting of _FILE_OFFSET_BITS controls the size of various file-related
* types and governs the mapping between file-related source function symbol
* names and the corresponding binary entry points.
*
* In the 32-bit environment, the default value is 32; if not set, set it to
* the default here, to simplify tests in other headers.
*
* In the 64-bit compilation environment, the only value allowed is 64.
*/
#if defined(_LP64)
#ifndef _FILE_OFFSET_BITS
#define _FILE_OFFSET_BITS 64
#endif
#if _FILE_OFFSET_BITS - 0 != 64
#error "invalid _FILE_OFFSET_BITS value specified"
#endif
#else /* _LP64 */
#ifndef _FILE_OFFSET_BITS
#define _FILE_OFFSET_BITS 32
#endif
#if _FILE_OFFSET_BITS - 0 != 32 && _FILE_OFFSET_BITS - 0 != 64
#error "invalid _FILE_OFFSET_BITS value specified"
#endif
#endif /* _LP64 */
/*
* Use of _XOPEN_SOURCE
*
* The following X/Open specifications are supported:
*
* X/Open Portability Guide, Issue 3 (XPG3)
* X/Open CAE Specification, Issue 4 (XPG4)
* X/Open CAE Specification, Issue 4, Version 2 (XPG4v2)
* X/Open CAE Specification, Issue 5 (XPG5)
* Open Group Technical Standard, Issue 6 (XPG6), also referred to as
* IEEE Std. 1003.1-2001 and ISO/IEC 9945:2002.
* Open Group Technical Standard, Issue 7 (XPG7), also referred to as
* IEEE Std. 1003.1-2008 and ISO/IEC 9945:2009.
*
* XPG4v2 is also referred to as UNIX 95 (SUS or SUSv1).
* XPG5 is also referred to as UNIX 98 or the Single Unix Specification,
* Version 2 (SUSv2)
* XPG6 is the result of a merge of the X/Open and POSIX specifications
* and as such is also referred to as IEEE Std. 1003.1-2001 in
* addition to UNIX 03 and SUSv3.
* XPG7 is also referred to as UNIX 08 and SUSv4.
*
* When writing a conforming X/Open application, as per the specification
* requirements, the appropriate feature test macros must be defined at
* compile time. These are as follows. For more info, see standards(5).
*
* Feature Test Macro Specification
* ------------------------------------------------ -------------
* _XOPEN_SOURCE XPG3
* _XOPEN_SOURCE && _XOPEN_VERSION = 4 XPG4
* _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED = 1 XPG4v2
* _XOPEN_SOURCE = 500 XPG5
* _XOPEN_SOURCE = 600 (or POSIX_C_SOURCE=200112L) XPG6
* _XOPEN_SOURCE = 700 (or POSIX_C_SOURCE=200809L) XPG7
*
* In order to simplify the guards within the headers, the following
* implementation private test macros have been created. Applications
* must NOT use these private test macros as unexpected results will
* occur.
*
* Note that in general, the use of these private macros is cumulative.
* For example, the use of _XPG3 with no other restrictions on the X/Open
* namespace will make the symbols visible for XPG3 through XPG6
* compilation environments. The use of _XPG4_2 with no other X/Open
* namespace restrictions indicates that the symbols were introduced in
* XPG4v2 and are therefore visible for XPG4v2 through XPG6 compilation
* environments, but not for XPG3 or XPG4 compilation environments.
*
* _XPG3 X/Open Portability Guide, Issue 3 (XPG3)
* _XPG4 X/Open CAE Specification, Issue 4 (XPG4)
* _XPG4_2 X/Open CAE Specification, Issue 4, Version 2 (XPG4v2/UNIX 95/SUS)
* _XPG5 X/Open CAE Specification, Issue 5 (XPG5/UNIX 98/SUSv2)
* _XPG6 Open Group Technical Standard, Issue 6 (XPG6/UNIX 03/SUSv3)
* _XPG7 Open Group Technical Standard, Issue 7 (XPG7/UNIX 08/SUSv4)
*/
/* X/Open Portability Guide, Issue 3 */
#if defined(_XOPEN_SOURCE) && (_XOPEN_SOURCE - 0 < 500) && \
(_XOPEN_VERSION - 0 < 4) && !defined(_XOPEN_SOURCE_EXTENDED)
#define _XPG3
/* X/Open CAE Specification, Issue 4 */
#elif (defined(_XOPEN_SOURCE) && _XOPEN_VERSION - 0 == 4)
#define _XPG4
#define _XPG3
/* X/Open CAE Specification, Issue 4, Version 2 */
#elif (defined(_XOPEN_SOURCE) && _XOPEN_SOURCE_EXTENDED - 0 == 1)
#define _XPG4_2
#define _XPG4
#define _XPG3
/* X/Open CAE Specification, Issue 5 */
#elif (_XOPEN_SOURCE - 0 == 500)
#define _XPG5
#define _XPG4_2
#define _XPG4
#define _XPG3
#undef _POSIX_C_SOURCE
#define _POSIX_C_SOURCE 199506L
/* Open Group Technical Standard , Issue 6 */
#elif (_XOPEN_SOURCE - 0 == 600) || (_POSIX_C_SOURCE - 0 == 200112L)
#define _XPG6
#define _XPG5
#define _XPG4_2
#define _XPG4
#define _XPG3
#undef _POSIX_C_SOURCE
#define _POSIX_C_SOURCE 200112L
#undef _XOPEN_SOURCE
#define _XOPEN_SOURCE 600
/* Open Group Technical Standard, Issue 7 */
#elif (_XOPEN_SOURCE - 0 == 700) || (_POSIX_C_SOURCE - 0 == 200809L)
#define _XPG7
#define _XPG6
#define _XPG5
#define _XPG4_2
#define _XPG4
#define _XPG3
#undef _POSIX_C_SOURCE
#define _POSIX_C_SOURCE 200809L
#undef _XOPEN_SOURCE
#define _XOPEN_SOURCE 700
#endif
/*
* _XOPEN_VERSION is defined by the X/Open specifications and is not
* normally defined by the application, except in the case of an XPG4
* application. On the implementation side, _XOPEN_VERSION defined with
* the value of 3 indicates an XPG3 application. _XOPEN_VERSION defined
* with the value of 4 indicates an XPG4 or XPG4v2 (UNIX 95) application.
* _XOPEN_VERSION defined with a value of 500 indicates an XPG5 (UNIX 98)
* application and with a value of 600 indicates an XPG6 (UNIX 03)
* application and with a value of 700 indicates an XPG7 (UNIX 08).
* The appropriate version is determined by the use of the
* feature test macros described earlier. The value of _XOPEN_VERSION
* defaults to 3 otherwise indicating support for XPG3 applications.
*/
#ifndef _XOPEN_VERSION
#if defined(_XPG7)
#define _XOPEN_VERSION 700
#elif defined(_XPG6)
#define _XOPEN_VERSION 600
#elif defined(_XPG5)
#define _XOPEN_VERSION 500
#elif defined(_XPG4_2)
#define _XOPEN_VERSION 4
#else
#define _XOPEN_VERSION 3
#endif
#endif
/*
* ANSI C and ISO 9899:1990 say the type long long doesn't exist in strictly
* conforming environments. ISO 9899:1999 says it does.
*
* The presence of _LONGLONG_TYPE says "long long exists" which is therefore
* defined in all but strictly conforming environments that disallow it.
*/
#if !defined(_STDC_C99) && defined(_STRICT_STDC) && !defined(__GNUC__)
/*
* Resist attempts to force the definition of long long in this case.
*/
#if defined(_LONGLONG_TYPE)
#error "No long long in strictly conforming ANSI C & 1990 ISO C environments"
#endif
#else
#if !defined(_LONGLONG_TYPE)
#define _LONGLONG_TYPE
#endif
#endif
/*
* It is invalid to compile an XPG3, XPG4, XPG4v2, or XPG5 application
* using c99. The same is true for POSIX.1-1990, POSIX.2-1992, POSIX.1b,
* and POSIX.1c applications. Likewise, it is invalid to compile an XPG6
* or a POSIX.1-2001 application with anything other than a c99 or later
* compiler. Therefore, we force an error in both cases.
*/
#if defined(_STDC_C99) && (defined(__XOPEN_OR_POSIX) && !defined(_XPG6))
#error "Compiler or options invalid for pre-UNIX 03 X/Open applications \
and pre-2001 POSIX applications"
#elif !defined(_STDC_C99) && \
(defined(__XOPEN_OR_POSIX) && defined(_XPG6))
#error "Compiler or options invalid; UNIX 03 and POSIX.1-2001 applications \
require the use of c99"
#endif
/*
* The following macro defines a value for the ISO C99 restrict
* keyword so that _RESTRICT_KYWD resolves to "restrict" if
* an ISO C99 compiler is used and "" (null string) if any other
* compiler is used. This allows for the use of single prototype
* declarations regardless of compiler version.
*/
#if (defined(__STDC__) && defined(_STDC_C99)) && !defined(__cplusplus)
#define _RESTRICT_KYWD restrict
#else
#define _RESTRICT_KYWD
#endif
/*
* The following macro indicates header support for the ANSI C++
* standard. The ISO/IEC designation for this is ISO/IEC FDIS 14882.
*/
#define _ISO_CPP_14882_1998
/*
* The following macro indicates header support for the C99 standard,
* ISO/IEC 9899:1999, Programming Languages - C.
*/
#define _ISO_C_9899_1999
/*
* The following macro indicates header support for DTrace. The value is an
* integer that corresponds to the major version number for DTrace.
*/
#define _DTRACE_VERSION 1
#ifdef __cplusplus
}
#endif
#endif /* _SYS_FEATURE_TESTS_H */
