Import from rebasing repo at b78b6b80 (new files)vendor/device-tree/ianc-b78b6b80

690 files changed, 79883 insertions, 0 deletions

diff --git a/.gitignore b/.gitignore
new file mode 100644
index 000000000000..5023c8e066cb
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,4 @@
+.*
+!.gitignore
+*.dtb
+
diff --git a/Bindings/arm/adapteva.txt b/Bindings/arm/adapteva.txt
new file mode 100644
index 000000000000..1d8af9e36065
--- /dev/null
+++ b/Bindings/arm/adapteva.txt
@@ -0,0 +1,7 @@
+Adapteva Platforms Device Tree Bindings
+---------------------------------------
+
+Parallella board
+
+Required root node properties:
+    - compatible = "adapteva,parallella";
diff --git a/Bindings/arm/armada-375.txt b/Bindings/arm/armada-375.txt
new file mode 100644
index 000000000000..867d0b80cb8f
--- /dev/null
+++ b/Bindings/arm/armada-375.txt
@@ -0,0 +1,9 @@
+Marvell Armada 375 Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 375 family shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada375"
diff --git a/Bindings/arm/armada-380-mpcore-soc-ctrl.txt b/Bindings/arm/armada-380-mpcore-soc-ctrl.txt
new file mode 100644
index 000000000000..8781073029e9
--- /dev/null
+++ b/Bindings/arm/armada-380-mpcore-soc-ctrl.txt
@@ -0,0 +1,14 @@
+Marvell Armada 38x CA9 MPcore SoC Controller
+============================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
+
+- reg: should be the register base and length as documented in the
+  datasheet for the CA9 MPcore SoC Control registers
+
+mpcore-soc-ctrl@20d20 {
+	compatible = "marvell,armada-380-mpcore-soc-ctrl";
+	reg = <0x20d20 0x6c>;
+};
diff --git a/Bindings/arm/armada-38x.txt b/Bindings/arm/armada-38x.txt
new file mode 100644
index 000000000000..ad9f8ed4d9bd
--- /dev/null
+++ b/Bindings/arm/armada-38x.txt
@@ -0,0 +1,20 @@
+Marvell Armada 38x Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 38x family shall have the
+following property:
+
+Required root node property:
+
+ - compatible: must contain "marvell,armada380"
+
+In addition, boards using the Marvell Armada 385 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada385"
+
+Example:
+
+compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
diff --git a/Bindings/arm/armada-cpu-reset.txt b/Bindings/arm/armada-cpu-reset.txt
new file mode 100644
index 000000000000..b63a7b6ab998
--- /dev/null
+++ b/Bindings/arm/armada-cpu-reset.txt
@@ -0,0 +1,14 @@
+Marvell Armada CPU reset controller
+===================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-370-cpu-reset".
+
+- reg: should be register base and length as documented in the
+  datasheet for the CPU reset registers
+
+cpurst: cpurst@20800 {
+       compatible = "marvell,armada-370-cpu-reset";
+       reg = <0x20800 0x20>;
+};
diff --git a/Bindings/arm/axxia.txt b/Bindings/arm/axxia.txt
new file mode 100644
index 000000000000..7b4ef9c07696
--- /dev/null
+++ b/Bindings/arm/axxia.txt
@@ -0,0 +1,12 @@
+Axxia AXM55xx device tree bindings
+
+Boards using the AXM55xx SoC need to have the following properties:
+
+Required root node property:
+
+  - compatible = "lsi,axm5516"
+
+Boards:
+
+  LSI AXM5516 Validation board (Amarillo)
+	compatible = "lsi,axm5516-amarillo", "lsi,axm5516"
diff --git a/Bindings/arm/bcm/bcm21664.txt b/Bindings/arm/bcm/bcm21664.txt
new file mode 100644
index 000000000000..e0774255e1a6
--- /dev/null
+++ b/Bindings/arm/bcm/bcm21664.txt
@@ -0,0 +1,15 @@
+Broadcom BCM21664 device tree bindings
+--------------------------------------
+
+This document describes the device tree bindings for boards with the BCM21664
+SoC.
+
+Required root node property:
+  - compatible: brcm,bcm21664
+
+Example:
+	/ {
+		model = "BCM21664 SoC";
+		compatible = "brcm,bcm21664";
+		[...]
+	}
diff --git a/Bindings/arm/bcm/brcm,bcm11351-cpu-method b/Bindings/arm/bcm/brcm,bcm11351-cpu-method
new file mode 100644
index 000000000000..8240c023e202
--- /dev/null
+++ b/Bindings/arm/bcm/brcm,bcm11351-cpu-method
@@ -0,0 +1,36 @@
+Broadcom Kona Family CPU Enable Method
+--------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
+
+The enable method is specified by defining the following required
+properties in the "cpus" device tree node:
+  - enable-method = "brcm,bcm11351-cpu-method";
+  - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU.  The value written to the register is
+formed by encoding the target CPU id into the low bits of the
+physical start address it should jump to.
+
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm11351-cpu-method";
+		secondary-boot-reg = <0x3500417c>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
diff --git a/Bindings/arm/bcm/kona-resetmgr.txt b/Bindings/arm/bcm/kona-resetmgr.txt
new file mode 100644
index 000000000000..93f31ca1ef4b
--- /dev/null
+++ b/Bindings/arm/bcm/kona-resetmgr.txt
@@ -0,0 +1,14 @@
+Broadcom Kona Family Reset Manager
+----------------------------------
+
+The reset manager is used on the Broadcom BCM21664 SoC.
+
+Required properties:
+  - compatible: brcm,bcm21664-resetmgr
+  - reg: memory address & range
+
+Example:
+	brcm,resetmgr@35001f00 {
+		compatible = "brcm,bcm21664-resetmgr";
+		reg = <0x35001f00 0x24>;
+	};
diff --git a/Bindings/arm/bcm4708.txt b/Bindings/arm/bcm4708.txt
new file mode 100644
index 000000000000..6b0f49f6f499
--- /dev/null
+++ b/Bindings/arm/bcm4708.txt
@@ -0,0 +1,8 @@
+Broadcom BCM4708 device tree bindings
+-------------------------------------------
+
+Boards with the BCM4708 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "brcm,bcm4708";
diff --git a/Bindings/arm/brcm-brcmstb.txt b/Bindings/arm/brcm-brcmstb.txt
new file mode 100644
index 000000000000..3c436cc4f35d
--- /dev/null
+++ b/Bindings/arm/brcm-brcmstb.txt
@@ -0,0 +1,95 @@
+ARM Broadcom STB platforms Device Tree Bindings
+-----------------------------------------------
+Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
+SoC shall have the following DT organization:
+
+Required root node properties:
+    - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
+
+example:
+/ {
+    #address-cells = <2>;
+    #size-cells = <2>;
+    model = "Broadcom STB (bcm7445)";
+    compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+Further, syscon nodes that map platform-specific registers used for general
+system control is required:
+
+    - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+
+example:
+    rdb {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "simple-bus";
+        ranges = <0 0x00 0xf0000000 0x1000000>;
+
+        sun_top_ctrl: syscon@404000 {
+            compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
+            reg = <0x404000 0x51c>;
+        };
+
+        hif_cpubiuctrl: syscon@3e2400 {
+            compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
+            reg = <0x3e2400 0x5b4>;
+        };
+
+        hif_continuation: syscon@452000 {
+            compatible = "brcm,bcm7445-hif-continuation", "syscon";
+            reg = <0x452000 0x100>;
+        };
+    };
+
+Lastly, nodes that allow for support of SMP initialization and reboot are
+required:
+
+smpboot
+-------
+Required properties:
+
+    - compatible
+        The string "brcm,brcmstb-smpboot".
+
+    - syscon-cpu
+        A phandle / integer array property which lets the BSP know the location
+        of certain CPU power-on registers.
+
+        The layout of the property is as follows:
+            o a phandle to the "hif_cpubiuctrl" syscon node
+            o offset to the base CPU power zone register
+            o offset to the base CPU reset register
+
+    - syscon-cont
+        A phandle pointing to the syscon node which describes the CPU boot
+        continuation registers.
+            o a phandle to the "hif_continuation" syscon node
+
+example:
+    smpboot {
+        compatible = "brcm,brcmstb-smpboot";
+        syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+        syscon-cont = <&hif_continuation>;
+    };
+
+reboot
+-------
+Required properties
+
+    - compatible
+        The string property "brcm,brcmstb-reboot".
+
+    - syscon
+        A phandle / integer array that points to the syscon node which describes
+        the general system reset registers.
+            o a phandle to "sun_top_ctrl"
+            o offset to the "reset source enable" register
+            o offset to the "software master reset" register
+
+example:
+    reboot {
+        compatible = "brcm,brcmstb-reboot";
+        syscon = <&sun_top_ctrl 0x304 0x308>;
+    };
diff --git a/Bindings/arm/ccn.txt b/Bindings/arm/ccn.txt
new file mode 100644
index 000000000000..b100d3847d88
--- /dev/null
+++ b/Bindings/arm/ccn.txt
@@ -0,0 +1,21 @@
+* ARM CCN (Cache Coherent Network)
+
+Required properties:
+
+- compatible: (standard compatible string) should be one of:
+	"arm,ccn-504"
+	"arm,ccn-508"
+
+- reg: (standard registers property) physical address and size
+	(16MB) of the configuration registers block
+
+- interrupts: (standard interrupt property) single interrupt
+	generated by the control block
+
+Example:
+
+	ccn@0x2000000000 {
+		compatible = "arm,ccn-504";
+		reg = <0x20 0x00000000 0 0x1000000>;
+		interrupts = <0 181 4>;
+	};
diff --git a/Bindings/arm/cpu-enable-method/marvell,berlin-smp b/Bindings/arm/cpu-enable-method/marvell,berlin-smp
new file mode 100644
index 000000000000..cd236b727e2a
--- /dev/null
+++ b/Bindings/arm/cpu-enable-method/marvell,berlin-smp
@@ -0,0 +1,41 @@
+========================================================
+Secondary CPU enable-method "marvell,berlin-smp" binding
+========================================================
+
+This document describes the "marvell,berlin-smp" method for enabling secondary
+CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should
+be defined in the "cpus" node.
+
+Enable method name:	"marvell,berlin-smp"
+Compatible machines:	"marvell,berlin2" and "marvell,berlin2q"
+Compatible CPUs:	"marvell,pj4b" and "arm,cortex-a9"
+Related properties:	(none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"marvell,berlin-cpu-ctrl"[1].
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,berlin-smp";
+
+		cpu@0 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+	};
+
+--
+[1] arm/marvell,berlin.txt
diff --git a/Bindings/arm/exynos/smp-sysram.txt b/Bindings/arm/exynos/smp-sysram.txt
new file mode 100644
index 000000000000..4a0a4f70a0ce
--- /dev/null
+++ b/Bindings/arm/exynos/smp-sysram.txt
@@ -0,0 +1,38 @@
+Samsung Exynos SYSRAM for SMP bringup:
+------------------------------------
+
+Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup
+of the secondary cores. Once the core gets powered up it executes the
+code that is residing at some specific location of the SYSRAM.
+
+Therefore reserved section sub-nodes have to be added to the mmio-sram
+declaration. These nodes are of two types depending upon secure or
+non-secure execution environment.
+
+Required sub-node properties:
+- compatible : depending upon boot mode, should be
+		"samsung,exynos4210-sysram" : for Secure SYSRAM
+		"samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sysram.txt
+
+Example:
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x54000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x54000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@53000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x53000 0x1000>;
+		};
+	};
diff --git a/Bindings/arm/gic-v3.txt b/Bindings/arm/gic-v3.txt
new file mode 100644
index 000000000000..33cd05e6c125
--- /dev/null
+++ b/Bindings/arm/gic-v3.txt
@@ -0,0 +1,79 @@
+* ARM Generic Interrupt Controller, version 3
+
+AArch64 SMP cores are often associated with a GICv3, providing Private
+Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+Software Generated Interrupts (SGI), and Locality-specific Peripheral
+Interrupts (LPI).
+
+Main node required properties:
+
+- compatible : should at least contain  "arm,gic-v3".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. Must be a single cell with a value of at least 3.
+
+  The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+  interrupts. Other values are reserved for future use.
+
+  The 2nd cell contains the interrupt number for the interrupt type.
+  SPI interrupts are in the range [0-987]. PPI interrupts are in the
+  range [0-15].
+
+  The 3rd cell is the flags, encoded as follows:
+	bits[3:0] trigger type and level flags.
+		1 = edge triggered
+		4 = level triggered
+
+  Cells 4 and beyond are reserved for future use. When the 1st cell
+  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
+  ignored. It is recommended that padding cells have a value of 0.
+
+- reg : Specifies base physical address(s) and size of the GIC
+  registers, in the following order:
+  - GIC Distributor interface (GICD)
+  - GIC Redistributors (GICR), one range per redistributor region
+  - GIC CPU interface (GICC)
+  - GIC Hypervisor interface (GICH)
+  - GIC Virtual CPU interface (GICV)
+
+  GICC, GICH and GICV are optional.
+
+- interrupts : Interrupt source of the VGIC maintenance interrupt.
+
+Optional
+
+- redistributor-stride : If using padding pages, specifies the stride
+  of consecutive redistributors. Must be a multiple of 64kB.
+
+- #redistributor-regions: The number of independent contiguous regions
+  occupied by the redistributors. Required if more than one such
+  region is present.
+
+Examples:
+
+	gic: interrupt-controller@2cf00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x2f000000 0 0x10000>,	// GICD
+		      <0x0 0x2f100000 0 0x200000>,	// GICR
+		      <0x0 0x2c000000 0 0x2000>,	// GICC
+		      <0x0 0x2c010000 0 0x2000>,	// GICH
+		      <0x0 0x2c020000 0 0x2000>;	// GICV
+		interrupts = <1 9 4>;
+	};
+
+	gic: interrupt-controller@2c010000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		redistributor-stride = <0x0 0x40000>;	// 256kB stride
+		#redistributor-regions = <2>;
+		reg = <0x0 0x2c010000 0 0x10000>,	// GICD
+		      <0x0 0x2d000000 0 0x800000>,	// GICR 1: CPUs 0-31
+		      <0x0 0x2e000000 0 0x800000>;	// GICR 2: CPUs 32-63
+		      <0x0 0x2c040000 0 0x2000>,	// GICC
+		      <0x0 0x2c060000 0 0x2000>,	// GICH
+		      <0x0 0x2c080000 0 0x2000>;	// GICV
+		interrupts = <1 9 4>;
+	};
diff --git a/Bindings/arm/marvell,dove.txt b/Bindings/arm/marvell,dove.txt
new file mode 100644
index 000000000000..aaaf64c56e44
--- /dev/null
+++ b/Bindings/arm/marvell,dove.txt
@@ -0,0 +1,22 @@
+Marvell Dove Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with a Marvell Dove SoC shall have the following properties:
+
+Required root node property:
+- compatible: must contain "marvell,dove";
+
+* Global Configuration registers
+
+Global Configuration registers of Dove SoC are shared by a syscon node.
+
+Required properties:
+- compatible: must contain "marvell,dove-global-config" and "syscon".
+- reg: base address and size of the Global Configuration registers.
+
+Example:
+
+gconf: global-config@e802c {
+	compatible = "marvell,dove-global-config", "syscon";
+	reg = <0xe802c 0x14>;
+};
diff --git a/Bindings/arm/marvell,kirkwood.txt b/Bindings/arm/marvell,kirkwood.txt
new file mode 100644
index 000000000000..925ecbf6e7b7
--- /dev/null
+++ b/Bindings/arm/marvell,kirkwood.txt
@@ -0,0 +1,97 @@
+Marvell Kirkwood SoC Family Device Tree Bindings
+------------------------------------------------
+
+Boards with a SoC of the Marvell Kirkwook family, eg 88f6281
+
+* Required root node properties:
+compatible: must contain "marvell,kirkwood"
+
+In addition, the above compatible shall be extended with the specific
+SoC. Currently known SoC compatibles are:
+
+"marvell,kirkwood-88f6192"
+"marvell,kirkwood-88f6281"
+"marvell,kirkwood-88f6282"
+"marvell,kirkwood-88f6283"
+"marvell,kirkwood-88f6702"
+"marvell,kirkwood-98DX4122"
+
+And in addition, the compatible shall be extended with the specific
+board. Currently known boards are:
+
+"buffalo,lschlv2"
+"buffalo,lsxhl"
+"buffalo,lsxl"
+"dlink,dns-320"
+"dlink,dns-320-a1"
+"dlink,dns-325"
+"dlink,dns-325-a1"
+"dlink,dns-kirkwood"
+"excito,b3"
+"globalscale,dreamplug-003-ds2001"
+"globalscale,guruplug"
+"globalscale,guruplug-server-plus"
+"globalscale,sheevaplug"
+"globalscale,sheevaplug"
+"globalscale,sheevaplug-esata"
+"globalscale,sheevaplug-esata-rev13"
+"iom,iconnect"
+"iom,iconnect-1.1"
+"iom,ix2-200"
+"keymile,km_kirkwood"
+"lacie,cloudbox"
+"lacie,inetspace_v2"
+"lacie,laplug"
+"lacie,netspace_lite_v2"
+"lacie,netspace_max_v2"
+"lacie,netspace_mini_v2"
+"lacie,netspace_v2"
+"marvell,db-88f6281-bp"
+"marvell,db-88f6282-bp"
+"marvell,mv88f6281gtw-ge"
+"marvell,rd88f6281"
+"marvell,rd88f6281"
+"marvell,rd88f6281-a0"
+"marvell,rd88f6281-a1"
+"mpl,cec4"
+"mpl,cec4-10"
+"netgear,readynas"
+"netgear,readynas"
+"netgear,readynas-duo-v2"
+"netgear,readynas-nv+-v2"
+"plathome,openblocks-a6"
+"plathome,openblocks-a7"
+"raidsonic,ib-nas6210"
+"raidsonic,ib-nas6210-b"
+"raidsonic,ib-nas6220"
+"raidsonic,ib-nas6220-b"
+"raidsonic,ib-nas62x0"
+"seagate,dockstar"
+"seagate,goflexnet"
+"synology,ds109"
+"synology,ds110jv10"
+"synology,ds110jv20"
+"synology,ds110jv30"
+"synology,ds111"
+"synology,ds209"
+"synology,ds210jv10"
+"synology,ds210jv20"
+"synology,ds212"
+"synology,ds212jv10"
+"synology,ds212jv20"
+"synology,ds212pv10"
+"synology,ds409"
+"synology,ds409slim"
+"synology,ds410j"
+"synology,ds411"
+"synology,ds411j"
+"synology,ds411slim"
+"synology,ds413jv10"
+"synology,rs212"
+"synology,rs409"
+"synology,rs411"
+"synology,rs812"
+"usi,topkick"
+"usi,topkick-1281P2"
+"zyxel,nsa310"
+"zyxel,nsa310a"
diff --git a/Bindings/arm/mediatek.txt b/Bindings/arm/mediatek.txt
new file mode 100644
index 000000000000..d6ac71f37314
--- /dev/null
+++ b/Bindings/arm/mediatek.txt
@@ -0,0 +1,8 @@
+Mediatek MT6589 Platforms Device Tree Bindings
+
+Boards with a SoC of the Mediatek MT6589 shall have the following property:
+
+Required root node property:
+
+compatible: must contain "mediatek,mt6589"
+
diff --git a/Bindings/arm/mrvl/feroceon.txt b/Bindings/arm/mrvl/feroceon.txt
new file mode 100644
index 000000000000..0d244b999d10
--- /dev/null
+++ b/Bindings/arm/mrvl/feroceon.txt
@@ -0,0 +1,16 @@
+* Marvell Feroceon Cache
+
+Required properties:
+- compatible : Should be either "marvell,feroceon-cache" or
+  	       "marvell,kirkwood-cache".
+
+Optional properties:
+- reg        : Address of the L2 cache control register. Mandatory for
+  	       "marvell,kirkwood-cache", not used by "marvell,feroceon-cache"
+
+
+Example:
+		l2: l2-cache@20128 {
+			compatible = "marvell,kirkwood-cache";
+			reg = <0x20128 0x4>;
+		};
diff --git a/Bindings/arm/msm/qcom,kpss-acc.txt b/Bindings/arm/msm/qcom,kpss-acc.txt
new file mode 100644
index 000000000000..1333db9acfee
--- /dev/null
+++ b/Bindings/arm/msm/qcom,kpss-acc.txt
@@ -0,0 +1,30 @@
+Krait Processor Sub-system (KPSS) Application Clock Controller (ACC)
+
+The KPSS ACC provides clock, power domain, and reset control to a Krait CPU.
+There is one ACC register region per CPU within the KPSS remapped region as
+well as an alias register region that remaps accesses to the ACC associated
+with the CPU accessing the region.
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: should be one of:
+			"qcom,kpss-acc-v1"
+			"qcom,kpss-acc-v2"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first element specifies the base address and size of
+		    the register region. An optional second element specifies
+		    the base address and size of the alias register region.
+
+Example:
+
+	clock-controller@2088000 {
+		compatible = "qcom,kpss-acc-v2";
+		reg = <0x02088000 0x1000>,
+		      <0x02008000 0x1000>;
+	};
diff --git a/Bindings/arm/msm/qcom,saw2.txt b/Bindings/arm/msm/qcom,saw2.txt
new file mode 100644
index 000000000000..1505fb8e131a
--- /dev/null
+++ b/Bindings/arm/msm/qcom,saw2.txt
@@ -0,0 +1,35 @@
+SPM AVS Wrapper 2 (SAW2)
+
+The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
+Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
+micro-controller that transitions a piece of hardware (like a processor or
+subsystem) into and out of low power modes via a direct connection to
+the PMIC. It can also be wired up to interact with other processors in the
+system, notifying them when a low power state is entered or exited.
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: shall contain "qcom,saw2". A more specific value should be
+		    one of:
+			 "qcom,saw2-v1"
+			 "qcom,saw2-v1.1"
+			 "qcom,saw2-v2"
+			 "qcom,saw2-v2.1"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first element specifies the base address and size of
+		    the register region. An optional second element specifies
+		    the base address and size of the alias register region.
+
+
+Example:
+
+	regulator@2099000 {
+		compatible = "qcom,saw2";
+		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+	};
diff --git a/Bindings/arm/omap/crossbar.txt b/Bindings/arm/omap/crossbar.txt
new file mode 100644
index 000000000000..4139db353d0a
--- /dev/null
+++ b/Bindings/arm/omap/crossbar.txt
@@ -0,0 +1,63 @@
+Some socs have a large number of interrupts requests to service
+the needs of its many peripherals and subsystems. All of the
+interrupt lines from the subsystems are not needed at the same
+time, so they have to be muxed to the irq-controller appropriately.
+In such places a interrupt controllers are preceded by an CROSSBAR
+that provides flexibility in muxing the device requests to the controller
+inputs.
+
+Required properties:
+- compatible : Should be "ti,irq-crossbar"
+- reg: Base address and the size of the crossbar registers.
+- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
+- ti,reg-size: Size of a individual register in bytes. Every individual
+	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
+- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
+		 crossbar. These interrupt lines are reserved in the soc,
+		 so crossbar bar driver should not consider them as free
+		 lines.
+
+Optional properties:
+- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for
+  SOC-specific hard-wiring of those irqs which unexpectedly bypasses the
+  crossbar. These irqs have a crossbar register, but still cannot be used.
+
+- ti,irqs-safe-map: integer which maps to a safe configuration to use
+  when the interrupt controller irq is unused (when not provided, default is 0)
+
+Examples:
+		crossbar_mpu: @4a020000 {
+			compatible = "ti,irq-crossbar";
+			reg = <0x4a002a48 0x130>;
+			ti,max-irqs = <160>;
+			ti,max-crossbar-sources = <400>;
+			ti,reg-size = <2>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+			ti,irqs-skip = <10 133 139 140>;
+		};
+
+Consumer:
+========
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
+Documentation/devicetree/bindings/arm/gic.txt for further details.
+
+An interrupt consumer on an SoC using crossbar will use:
+	interrupts = <GIC_SPI request_number interrupt_level>
+When the request number is between 0 to that described by
+"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
+request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
+quirky hardware mapping direct to GIC.
+
+Example:
+	device_x@0x4a023000 {
+		/* Crossbar 8 used */
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
+
+	device_y@0x4a033000 {
+		/* Direct mapped GIC SPI 1 used */
+		interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
diff --git a/Bindings/arm/omap/dmm.txt b/Bindings/arm/omap/dmm.txt
new file mode 100644
index 000000000000..8bd6d0a238a8
--- /dev/null
+++ b/Bindings/arm/omap/dmm.txt
@@ -0,0 +1,22 @@
+OMAP Dynamic Memory Manager (DMM) bindings
+
+The dynamic memory manager (DMM) is a module located immediately in front of the
+SDRAM controllers (called EMIFs on OMAP). DMM manages various aspects of memory
+accesses such as priority generation amongst initiators, configuration of SDRAM
+interleaving, optimizing transfer of 2D block objects, and provide MMU-like page
+translation for initiators which need contiguous dma bus addresses.
+
+Required properties:
+- compatible:	Should contain "ti,omap4-dmm" for OMAP4 family
+		Should contain "ti,omap5-dmm" for OMAP5 and DRA7x family
+- reg:		Contains DMM register address range (base address and length)
+- interrupts:	Should contain an interrupt-specifier for DMM_IRQ.
+- ti,hwmods:	Name of the hwmod associated to DMM, which is typically "dmm"
+
+Example:
+
+dmm@4e000000 {
+	compatible = "ti,omap4-dmm";
+	reg = <0x4e000000 0x800>;
+	ti,hwmods = "dmm";
+};
diff --git a/Bindings/arm/omap/prcm.txt b/Bindings/arm/omap/prcm.txt
new file mode 100644
index 000000000000..79074dac684a
--- /dev/null
+++ b/Bindings/arm/omap/prcm.txt
@@ -0,0 +1,65 @@
+OMAP PRCM bindings
+
+Power Reset and Clock Manager lists the device clocks and clockdomains under
+a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it,
+each describing one module and the clock hierarchy under it. see [1] for
+documentation about the individual clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible:	Must be one of:
+		"ti,am3-prcm"
+		"ti,am3-scrm"
+		"ti,am4-prcm"
+		"ti,am4-scrm"
+		"ti,omap2-prcm"
+		"ti,omap2-scrm"
+		"ti,omap3-prm"
+		"ti,omap3-cm"
+		"ti,omap3-scrm"
+		"ti,omap4-cm1"
+		"ti,omap4-prm"
+		"ti,omap4-cm2"
+		"ti,omap4-scrm"
+		"ti,omap5-prm"
+		"ti,omap5-cm-core-aon"
+		"ti,omap5-scrm"
+		"ti,omap5-cm-core"
+		"ti,dra7-prm"
+		"ti,dra7-cm-core-aon"
+		"ti,dra7-cm-core"
+- reg:		Contains PRCM module register address range
+		(base address and length)
+- clocks:	clocks for this module
+- clockdomains:	clockdomains for this module
+
+Example:
+
+cm: cm@48004000 {
+	compatible = "ti,omap3-cm";
+	reg = <0x48004000 0x4000>;
+
+	cm_clocks: clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	cm_clockdomains: clockdomains {
+	};
+}
+
+&cm_clocks {
+	omap2_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+};
diff --git a/Bindings/arm/rockchip.txt b/Bindings/arm/rockchip.txt
new file mode 100644
index 000000000000..857f12636eb2
--- /dev/null
+++ b/Bindings/arm/rockchip.txt
@@ -0,0 +1,10 @@
+Rockchip platforms device tree bindings
+---------------------------------------
+
+- bq Curie 2 tablet:
+    Required root node properties:
+      - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
+
+- Radxa Rock board:
+    Required root node properties:
+      - compatible = "radxa,rock", "rockchip,rk3188";
diff --git a/Bindings/arm/rockchip/pmu.txt b/Bindings/arm/rockchip/pmu.txt
new file mode 100644
index 000000000000..3ee9b428b2f7
--- /dev/null
+++ b/Bindings/arm/rockchip/pmu.txt
@@ -0,0 +1,16 @@
+Rockchip power-management-unit:
+-------------------------------
+
+The pmu is used to turn off and on different power domains of the SoCs
+This includes the power to the CPU cores.
+
+Required node properties:
+- compatible value : = "rockchip,rk3066-pmu";
+- reg : physical base address and the size of the registers window
+
+Example:
+
+	pmu@20004000 {
+		compatible = "rockchip,rk3066-pmu";
+		reg = <0x20004000 0x100>;
+	};
diff --git a/Bindings/arm/rockchip/smp-sram.txt b/Bindings/arm/rockchip/smp-sram.txt
new file mode 100644
index 000000000000..d9416fb8db6f
--- /dev/null
+++ b/Bindings/arm/rockchip/smp-sram.txt
@@ -0,0 +1,30 @@
+Rockchip SRAM for smp bringup:
+------------------------------
+
+Rockchip's smp-capable SoCs use the first part of the sram for the bringup
+of the cores. Once the core gets powered up it executes the code that is
+residing at the very beginning of the sram.
+
+Therefore a reserved section sub-node has to be added to the mmio-sram
+declaration.
+
+Required sub-node properties:
+- compatible : should be "rockchip,rk3066-smp-sram"
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sram.txt
+
+Example:
+
+	sram: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smp-sram@10080000 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x10080000 0x50>;
+		};
+	};
diff --git a/Bindings/arm/samsung/pmu.txt b/Bindings/arm/samsung/pmu.txt
new file mode 100644
index 000000000000..1e1979b229ff
--- /dev/null
+++ b/Bindings/arm/samsung/pmu.txt
@@ -0,0 +1,51 @@
+SAMSUNG Exynos SoC series PMU Registers
+
+Properties:
+ - compatible : should contain two values. First value must be one from following list:
+		   - "samsung,exynos3250-pmu" - for Exynos3250 SoC,
+		   - "samsung,exynos4210-pmu" - for Exynos4210 SoC,
+		   - "samsung,exynos4212-pmu" - for Exynos4212 SoC,
+		   - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
+		   - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
+		   - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
+		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
+		second value must be always "syscon".
+
+ - reg : offset and length of the register set.
+
+ - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
+		The single specifier cell is used as index to list of clocks
+		provided by PMU, which is currently:
+			0 : SoC clock output (CLKOUT pin)
+
+ - clock-names : list of clock names for particular CLKOUT mux inputs in
+		following format:
+			"clkoutN", where N is a decimal number corresponding to
+			CLKOUT mux control bits value for given input, e.g.
+				"clkout0", "clkout7", "clkout15".
+
+ - clocks : list of phandles and specifiers to all input clocks listed in
+		clock-names property.
+
+Example :
+pmu_system_controller: system-controller@10040000 {
+	compatible = "samsung,exynos5250-pmu", "syscon";
+	reg = <0x10040000 0x5000>;
+	#clock-cells = <1>;
+	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+			"clkout4", "clkout8", "clkout9";
+	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
+		<&clock CLK_XUSBXTI>;
+};
+
+Example of clock consumer :
+
+usb3503: usb3503@08 {
+	/* ... */
+	clock-names = "refclk";
+	clocks = <&pmu_system_controller 0>;
+	/* ... */
+};
diff --git a/Bindings/arm/spear-misc.txt b/Bindings/arm/spear-misc.txt
new file mode 100644
index 000000000000..cf649827ffcd
--- /dev/null
+++ b/Bindings/arm/spear-misc.txt
@@ -0,0 +1,9 @@
+SPEAr Misc configuration
+===========================
+SPEAr SOCs have some miscellaneous registers which are used to configure
+few properties of different peripheral controllers.
+
+misc node required properties:
+
+- compatible Should be	"st,spear1340-misc", "syscon".
+- reg: Address range of misc space upto 8K
diff --git a/Bindings/arm/sti.txt b/Bindings/arm/sti.txt
new file mode 100644
index 000000000000..92f16c78bb69
--- /dev/null
+++ b/Bindings/arm/sti.txt
@@ -0,0 +1,15 @@
+ST STi Platforms Device Tree Bindings
+---------------------------------------
+
+Boards with the ST STiH415 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih415";
+
+Boards with the ST STiH416 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih416";
+
+Boards with the ST STiH407 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih407";
+
diff --git a/Bindings/ata/ahci-st.txt b/Bindings/ata/ahci-st.txt
new file mode 100644
index 000000000000..0574a77a0b9f
--- /dev/null
+++ b/Bindings/ata/ahci-st.txt
@@ -0,0 +1,31 @@
+STMicroelectronics STi SATA controller
+
+This binding describes a SATA device.
+
+Required properties:
+ - compatible	   : Must be "st,sti-ahci"
+ - reg		   : Physical base addresses and length of register sets
+ - interrupts	   : Interrupt associated with the SATA device
+ - interrupt-names :   Associated name must be; "hostc"
+ - resets	   : The power-down and soft-reset lines of SATA IP
+ - reset-names	   :   Associated names must be; "pwr-dwn" and "sw-rst"
+ - clocks	   : The phandle for the clock
+ - clock-names	   :   Associated name must be; "ahci_clk"
+ - phys		   : The phandle for the PHY device
+ - phy-names	   :   Associated name must be; "ahci_phy"
+
+Example:
+
+	sata0: sata@fe380000 {
+		compatible      = "st,sti-ahci";
+		reg             = <0xfe380000 0x1000>;
+		interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
+		interrupt-names = "hostc";
+		phys	        = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>;
+		phy-names       = "ahci_phy";
+		resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
+				  <&softreset STIH416_SATA0_SOFTRESET>;
+		reset-names     = "pwr-dwn", "sw-rst";
+		clocks	        = <&clk_s_a0_ls CLK_ICN_REG>;
+		clock-names     = "ahci_clk";
+	};
diff --git a/Bindings/ata/apm-xgene.txt b/Bindings/ata/apm-xgene.txt
new file mode 100644
index 000000000000..a668f0e7d001
--- /dev/null
+++ b/Bindings/ata/apm-xgene.txt
@@ -0,0 +1,79 @@
+* APM X-Gene 6.0 Gb/s SATA host controller nodes
+
+SATA host controller nodes are defined to describe on-chip Serial ATA
+controllers. Each SATA controller (pair of ports) have its own node.
+
+Required properties:
+- compatible		: Shall contain:
+  * "apm,xgene-ahci"
+- reg			: First memory resource shall be the AHCI memory
+			  resource.
+			  Second memory resource shall be the host controller
+			  core memory resource.
+			  Third memory resource shall be the host controller
+			  diagnostic memory resource.
+			  4th memory resource shall be the host controller
+			  AXI memory resource.
+			  5th optional memory resource shall be the host
+			  controller MUX memory resource if required.
+- interrupts		: Interrupt-specifier for SATA host controller IRQ.
+- clocks		: Reference to the clock entry.
+- phys			: A list of phandles + phy-specifiers, one for each
+			  entry in phy-names.
+- phy-names		: Should contain:
+  * "sata-phy" for the SATA 6.0Gbps PHY
+
+Optional properties:
+- dma-coherent		: Present if dma operations are coherent
+- status		: Shall be "ok" if enabled or "disabled" if disabled.
+			  Default is "ok".
+
+Example:
+		sataclk: sataclk {
+			compatible = "fixed-clock";
+			#clock-cells = <1>;
+			clock-frequency = <100000000>;
+			clock-output-names = "sataclk";
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		sata2: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>,
+			      <0x0 0x1f227000 0x0 0x1000>;
+			interrupts = <0x0 0x87 0x4>;
+			dma-coherent;
+			status = "ok";
+			clocks = <&sataclk 0>;
+			phys = <&phy2 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata3: sata@1a800000 {
+			compatible = "apm,xgene-ahci-pcie";
+			reg = <0x0 0x1a800000 0x0 0x1000>,
+			      <0x0 0x1f230000 0x0 0x1000>,
+			      <0x0 0x1f23d000 0x0 0x1000>,
+			      <0x0 0x1f23e000 0x0 0x1000>,
+			      <0x0 0x1f237000 0x0 0x1000>;
+			interrupts = <0x0 0x88 0x4>;
+			dma-coherent;
+			status = "ok";
+			clocks = <&sataclk 0>;
+			phys = <&phy3 0>;
+			phy-names = "sata-phy";
+		};
diff --git a/Bindings/ata/imx-sata.txt b/Bindings/ata/imx-sata.txt
new file mode 100644
index 000000000000..fa511db18408
--- /dev/null
+++ b/Bindings/ata/imx-sata.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX AHCI SATA Controller
+
+The Freescale i.MX SATA controller mostly conforms to the AHCI interface
+with some special extensions at integration level.
+
+Required properties:
+- compatible : should be one of the following:
+   - "fsl,imx53-ahci" for i.MX53 SATA controller
+   - "fsl,imx6q-ahci" for i.MX6Q SATA controller
+- interrupts : interrupt mapping for SATA IRQ
+- reg : registers mapping
+- clocks : list of clock specifiers, must contain an entry for each
+  required entry in clock-names
+- clock-names : should include "sata", "sata_ref" and "ahb" entries
+
+Optional properties:
+- fsl,transmit-level-mV : transmit voltage level, in millivolts.
+- fsl,transmit-boost-mdB : transmit boost level, in milli-decibels
+- fsl,transmit-atten-16ths : transmit attenuation, in 16ths
+- fsl,receive-eq-mdB : receive equalisation, in milli-decibels
+  Please refer to the technical documentation or the driver source code
+  for the list of legal values for these options.
+- fsl,no-spread-spectrum : disable spread-spectrum clocking on the SATA
+  link.
+
+Examples:
+
+sata@02200000 {
+	compatible = "fsl,imx6q-ahci";
+	reg = <0x02200000 0x4000>;
+	interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX6QDL_CLK_SATA>,
+		 <&clks IMX6QDL_CLK_SATA_REF_100M>,
+		 <&clks IMX6QDL_CLK_AHB>;
+	clock-names = "sata", "sata_ref", "ahb";
+};
diff --git a/Bindings/ata/tegra-sata.txt b/Bindings/ata/tegra-sata.txt
new file mode 100644
index 000000000000..946f2072570b
--- /dev/null
+++ b/Bindings/ata/tegra-sata.txt
@@ -0,0 +1,30 @@
+Tegra124 SoC SATA AHCI controller
+
+Required properties :
+- compatible : "nvidia,tegra124-ahci".
+- reg : Should contain 2 entries:
+  - AHCI register set (SATA BAR5)
+  - SATA register set
+- interrupts : Defines the interrupt used by SATA
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - sata
+  - sata-oob
+  - cml1
+  - pll_e
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - sata
+  - sata-oob
+  - sata-cold
+- phys : Must contain an entry for each entry in phy-names.
+  See ../phy/phy-bindings.txt for details.
+- phy-names : Must include the following entries:
+  - sata-phy : XUSB PADCTL SATA PHY
+- hvdd-supply : Defines the SATA HVDD regulator
+- vddio-supply : Defines the SATA VDDIO regulator
+- avdd-supply : Defines the SATA AVDD regulator
+- target-5v-supply : Defines the SATA 5V power regulator
+- target-12v-supply : Defines the SATA 12V power regulator
diff --git a/Bindings/bus/brcm,gisb-arb.txt b/Bindings/bus/brcm,gisb-arb.txt
new file mode 100644
index 000000000000..e2d501d20c9a
--- /dev/null
+++ b/Bindings/bus/brcm,gisb-arb.txt
@@ -0,0 +1,30 @@
+Broadcom GISB bus Arbiter controller
+
+Required properties:
+
+- compatible: should be "brcm,gisb-arb"
+- reg: specifies the base physical address and size of the registers
+- interrupt-parent: specifies the phandle to the parent interrupt controller
+  this arbiter gets interrupt line from
+- interrupts: specifies the two interrupts (timeout and TEA) to be used from
+  the parent interrupt controller
+
+Optional properties:
+
+- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB
+  masters are valid at the system level
+- brcm,gisb-arb-master-names: string list of the litteral name of the GISB
+  masters. Should match the number of bits set in brcm,gisb-master-mask and
+  the order in which they appear
+
+Example:
+
+gisb-arb@f0400000 {
+	compatible = "brcm,gisb-arb";
+	reg = <0xf0400000 0x800>;
+	interrupts = <0>, <2>;
+	interrupt-parent = <&sun_l2_intc>;
+
+	brcm,gisb-arb-master-mask = <0x7>;
+	brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
+};
diff --git a/Bindings/clock/arm-integrator.txt b/Bindings/clock/arm-integrator.txt
new file mode 100644
index 000000000000..ecc69520bcea
--- /dev/null
+++ b/Bindings/clock/arm-integrator.txt
@@ -0,0 +1,34 @@
+Clock bindings for ARM Integrator and Versatile Core Module clocks
+
+Auxilary Oscillator Clock
+
+This is a configurable clock fed from a 24 MHz chrystal,
+used for generating e.g. video clocks. It is located on the
+core module and there is only one of these.
+
+This clock node *must* be a subnode of the core module, since
+it obtains the base address for it's address range from its
+parent node.
+
+
+Required properties:
+- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc"
+- #clock-cells: must be <0>
+
+Optional properties:
+- clocks: parent clock(s)
+
+Example:
+
+core-module@10000000 {
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+	auxosc: cm_aux_osc@25M {
+		#clock-cells = <0>;
+		compatible = "arm,integrator-cm-auxosc";
+		clocks = <&xtal24mhz>;
+	};
+};
diff --git a/Bindings/clock/clk-palmas-clk32kg-clocks.txt b/Bindings/clock/clk-palmas-clk32kg-clocks.txt
new file mode 100644
index 000000000000..4208886d834a
--- /dev/null
+++ b/Bindings/clock/clk-palmas-clk32kg-clocks.txt
@@ -0,0 +1,35 @@
+* Palmas 32KHz clocks *
+
+Palmas device has two clock output pins for 32KHz, KG and KG_AUDIO.
+
+This binding uses the common clock binding ./clock-bindings.txt.
+
+Required properties:
+- compatible :	"ti,palmas-clk32kg" for clk32kg clock
+		"ti,palmas-clk32kgaudio" for clk32kgaudio clock
+- #clock-cells : shall be set to 0.
+
+Optional property:
+- ti,external-sleep-control: The external enable input pins controlled the
+	enable/disable of clocks.  The external enable input pins ENABLE1,
+	ENABLE2 and NSLEEP. The valid values for the external pins are:
+		PALMAS_EXT_CONTROL_PIN_ENABLE1 for ENABLE1 pin
+		PALMAS_EXT_CONTROL_PIN_ENABLE2 for ENABLE2 pin
+		PALMAS_EXT_CONTROL_PIN_NSLEEP for NSLEEP pin
+	Option 0 or missing this property means the clock is enabled/disabled
+	via register access and these pins do not have any control.
+	The macros of external control pins for DTS is defined at
+	dt-bindings/mfd/palmas.h
+
+Example:
+	#include <dt-bindings/mfd/palmas.h>
+	...
+	palmas: tps65913@58 {
+		...
+		clk32kg: palmas_clk32k@0 {
+			compatible = "ti,palmas-clk32kg";
+			#clock-cells = <0>;
+			ti,external-sleep-control = <PALMAS_EXT_CONTROL_PIN_NSLEEP>;
+		};
+		...
+	};
diff --git a/Bindings/clock/clk-s5pv210-audss.txt b/Bindings/clock/clk-s5pv210-audss.txt
new file mode 100644
index 000000000000..4fc869b69d4a
--- /dev/null
+++ b/Bindings/clock/clk-s5pv210-audss.txt
@@ -0,0 +1,53 @@
+* Samsung Audio Subsystem Clock Controller
+
+The Samsung Audio Subsystem clock controller generates and supplies clocks
+to Audio Subsystem block available in the S5PV210 and compatible SoCs.
+
+Required Properties:
+
+- compatible: should be "samsung,s5pv210-audss-clock".
+- reg: physical base address and length of the controller's register set.
+
+- #clock-cells: should be 1.
+
+- clocks:
+  - hclk: AHB bus clock of the Audio Subsystem.
+  - xxti: Optional fixed rate PLL reference clock, parent of mout_audss. If
+    not specified (i.e. xusbxti is used for PLL reference), it is fixed to
+    a clock named "xxti".
+  - fout_epll: Input PLL to the AudioSS block, parent of mout_audss.
+  - iiscdclk0: Optional external i2s clock, parent of mout_i2s. If not
+    specified, it is fixed to a clock named "iiscdclk0".
+  - sclk_audio0: Audio bus clock, parent of mout_i2s.
+
+- clock-names: Aliases for the above clocks. They should be "hclk",
+  "xxti", "fout_epll", "iiscdclk0", and "sclk_audio0" respectively.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210-audss-clk.h header and can be used in device
+tree sources.
+
+Example: Clock controller node.
+
+	clk_audss: clock-controller@c0900000 {
+		compatible = "samsung,s5pv210-audss-clock";
+		reg = <0xc0900000 0x1000>;
+		#clock-cells = <1>;
+		clock-names = "hclk", "xxti",
+				"fout_epll", "sclk_audio0";
+		clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				<&clocks FOUT_EPLL>, <&clocks SCLK_AUDIO0>;
+	};
+
+Example: I2S controller node that consumes the clock generated by the clock
+	 controller. Refer to the standard clock bindings for information
+         about 'clocks' and 'clock-names' property.
+
+	i2s0: i2s@03830000 {
+		/* ... */
+		clock-names = "iis", "i2s_opclk0",
+				"i2s_opclk1";
+		clocks = <&clk_audss CLK_I2S>, <&clk_audss CLK_I2S>,
+				<&clk_audss CLK_DOUT_AUD_BUS>;
+		/* ... */
+	};
diff --git a/Bindings/clock/clps711x-clock.txt b/Bindings/clock/clps711x-clock.txt
new file mode 100644
index 000000000000..ce5a7476f05d
--- /dev/null
+++ b/Bindings/clock/clps711x-clock.txt
@@ -0,0 +1,19 @@
+* Clock bindings for the Cirrus Logic CLPS711X CPUs
+
+Required properties:
+- compatible       : Shall contain "cirrus,clps711x-clk".
+- reg              : Address of the internal register set.
+- startup-frequency: Factory set CPU startup frequency in HZ.
+- #clock-cells     : Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h
+for the full list of CLPS711X clock IDs.
+
+Example:
+	clks: clks@80000000 {
+		#clock-cells = <1>;
+		compatible = "cirrus,ep7312-clk", "cirrus,clps711x-clk";
+		reg = <0x80000000 0xc000>;
+		startup-frequency = <73728000>;
+	};
diff --git a/Bindings/clock/exynos3250-clock.txt b/Bindings/clock/exynos3250-clock.txt
new file mode 100644
index 000000000000..aadc9c59e2d1
--- /dev/null
+++ b/Bindings/clock/exynos3250-clock.txt
@@ -0,0 +1,41 @@
+* Samsung Exynos3250 Clock Controller
+
+The Exynos3250 clock controller generates and supplies clock to various
+controllers within the Exynos3250 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos3250.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+	cmu: clock-controller@10030000 {
+		compatible = "samsung,exynos3250-cmu";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x100>;
+		interrupts = <0 109 0>;
+		clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
diff --git a/Bindings/clock/exynos5260-clock.txt b/Bindings/clock/exynos5260-clock.txt
new file mode 100644
index 000000000000..5496b2fac483
--- /dev/null
+++ b/Bindings/clock/exynos5260-clock.txt
@@ -0,0 +1,190 @@
+* Samsung Exynos5260 Clock Controller
+
+Exynos5260 has 13 clock controllers which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5260-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+ - "xrtcxti" - input clock from XRTCXTI
+ - "ioclk_pcm_extclk" - pcm external operation clock
+ - "ioclk_spdif_extclk" - spdif external operation clock
+ - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+Phy clocks:
+
+There are several clocks which are generated by specific PHYs.
+These clocks are fed into the clock controller and then routed to
+the hardware blocks. These clocks are defined as fixed clocks in the
+driver with following names:
+
+ - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+ - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+ - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+ - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+ - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+ - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+ - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+ - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+ - "phyclk_dptx_phy_clk_div2"
+ - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+ - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+ - "phyclk_usbhost20_phy_freeclk"
+ - "phyclk_usbhost20_phy_clk48mohci"
+ - "phyclk_usbdrd30_udrd30_pipe_pclk"
+ - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+Required Properties for Clock Controller:
+
+ - compatible: should be one of the following.
+	1) "samsung,exynos5260-clock-top"
+	2) "samsung,exynos5260-clock-peri"
+	3) "samsung,exynos5260-clock-egl"
+	4) "samsung,exynos5260-clock-kfc"
+	5) "samsung,exynos5260-clock-g2d"
+	6) "samsung,exynos5260-clock-mif"
+	7) "samsung,exynos5260-clock-mfc"
+	8) "samsung,exynos5260-clock-g3d"
+	9) "samsung,exynos5260-clock-fsys"
+	10) "samsung,exynos5260-clock-aud"
+	11) "samsung,exynos5260-clock-isp"
+	12) "samsung,exynos5260-clock-gscl"
+	13) "samsung,exynos5260-clock-disp"
+
+ - reg: physical base address of the controller and the length of
+	memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+	the given clock controller. Please refer the next section to find
+	the input clocks for a given controller.
+
+ - clock-names: list of names of clocks which are fed as the input
+	to the given clock controller.
+
+Input clocks for top clock controller:
+	- fin_pll
+	- dout_mem_pll
+	- dout_bus_pll
+	- dout_media_pll
+
+Input clocks for peri clock controller:
+	- fin_pll
+	- ioclk_pcm_extclk
+	- ioclk_i2s_cdclk
+	- ioclk_spdif_extclk
+	- phyclk_hdmi_phy_ref_cko
+	- dout_aclk_peri_66
+	- dout_sclk_peri_uart0
+	- dout_sclk_peri_uart1
+	- dout_sclk_peri_uart2
+	- dout_sclk_peri_spi0_b
+	- dout_sclk_peri_spi1_b
+	- dout_sclk_peri_spi2_b
+	- dout_aclk_peri_aud
+	- dout_sclk_peri_spi0_b
+
+Input clocks for egl clock controller:
+	- fin_pll
+	- dout_bus_pll
+
+Input clocks for kfc clock controller:
+	- fin_pll
+	- dout_media_pll
+
+Input clocks for g2d clock controller:
+	- fin_pll
+	- dout_aclk_g2d_333
+
+Input clocks for mif clock controller:
+	- fin_pll
+
+Input clocks for mfc clock controller:
+	- fin_pll
+	- dout_aclk_mfc_333
+
+Input clocks for g3d clock controller:
+	- fin_pll
+
+Input clocks for fsys clock controller:
+	- fin_pll
+	- phyclk_usbhost20_phy_phyclock
+	- phyclk_usbhost20_phy_freeclk
+	- phyclk_usbhost20_phy_clk48mohci
+	- phyclk_usbdrd30_udrd30_pipe_pclk
+	- phyclk_usbdrd30_udrd30_phyclock
+	- dout_aclk_fsys_200
+
+Input clocks for aud clock controller:
+	- fin_pll
+	- fout_aud_pll
+	- ioclk_i2s_cdclk
+	- ioclk_pcm_extclk
+
+Input clocks for isp clock controller:
+	- fin_pll
+	- dout_aclk_isp1_266
+	- dout_aclk_isp1_400
+	- mout_aclk_isp1_266
+
+Input clocks for gscl clock controller:
+	- fin_pll
+	- dout_aclk_gscl_400
+	- dout_aclk_gscl_333
+
+Input clocks for disp clock controller:
+	- fin_pll
+	- phyclk_dptx_phy_ch3_txd_clk
+	- phyclk_dptx_phy_ch2_txd_clk
+	- phyclk_dptx_phy_ch1_txd_clk
+	- phyclk_dptx_phy_ch0_txd_clk
+	- phyclk_hdmi_phy_tmds_clko
+	- phyclk_hdmi_phy_ref_clko
+	- phyclk_hdmi_phy_pixel_clko
+	- phyclk_hdmi_link_o_tmds_clkhi
+	- phyclk_mipi_dphy_4l_m_txbyte_clkhs
+	- phyclk_dptx_phy_o_ref_clk_24m
+	- phyclk_dptx_phy_clk_div2
+	- phyclk_mipi_dphy_4l_m_rxclkesc0
+	- phyclk_hdmi_phy_ref_cko
+	- ioclk_spdif_extclk
+	- dout_aclk_peri_aud
+	- dout_aclk_disp_222
+	- dout_sclk_disp_pixel
+	- dout_aclk_disp_333
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock_mfc: clock-controller@11090000 {
+		compatible = "samsung,exynos5260-clock-mfc";
+		clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
+		clock-names = "fin_pll", "dout_aclk_mfc_333";
+		reg = <0x11090000 0x10000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the
+		peri clock controller. Refer to the standard clock bindings for
+		information about 'clocks' and 'clock-names' property.
+
+	serial@12C00000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 146 0>;
+		clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
diff --git a/Bindings/clock/exynos5410-clock.txt b/Bindings/clock/exynos5410-clock.txt
new file mode 100644
index 000000000000..aeab635b07b5
--- /dev/null
+++ b/Bindings/clock/exynos5410-clock.txt
@@ -0,0 +1,45 @@
+* Samsung Exynos5410 Clock Controller
+
+The Exynos5410 clock controller generates and supplies clock to various
+controllers within the Exynos5410 SoC.
+
+Required Properties:
+
+- compatible: should be "samsung,exynos5410-clock"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5410.h header and can be used in device
+tree sources.
+
+External clock:
+
+There is clock that is generated outside the SoC. It
+is expected that it is defined using standard clock bindings
+with following clock-output-name:
+
+ - "fin_pll" - PLL input clock from XXTI
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5410-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@12C20000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 51 0>;
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
diff --git a/Bindings/clock/hix5hd2-clock.txt b/Bindings/clock/hix5hd2-clock.txt
new file mode 100644
index 000000000000..7894a64887cb
--- /dev/null
+++ b/Bindings/clock/hix5hd2-clock.txt
@@ -0,0 +1,31 @@
+* Hisilicon Hix5hd2 Clock Controller
+
+The hix5hd2 clock controller generates and supplies clock to various
+controllers within the hix5hd2 SoC.
+
+Required Properties:
+
+- compatible: should be "hisilicon,hix5hd2-clock"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>.
+
+Examples:
+	clock: clock@f8a22000 {
+		compatible = "hisilicon,hix5hd2-clock";
+		reg = <0xf8a22000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	uart0: uart@f8b00000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0xf8b00000 0x1000>;
+		interrupts = <0 49 4>;
+		clocks = <&clock HIX5HD2_FIXED_83M>;
+		clock-names = "apb_pclk";
+		status = "disabled";
+	};
diff --git a/Bindings/clock/imx1-clock.txt b/Bindings/clock/imx1-clock.txt
new file mode 100644
index 000000000000..b7adf4e3ea98
--- /dev/null
+++ b/Bindings/clock/imx1-clock.txt
@@ -0,0 +1,26 @@
+* Clock bindings for Freescale i.MX1 CPUs
+
+Required properties:
+- compatible: Should be "fsl,imx1-ccm".
+- reg: Address and length of the register set.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+for the full list of i.MX1 clock IDs.
+
+Examples:
+	clks: ccm@0021b000 {
+		#clock-cells = <1>;
+		compatible = "fsl,imx1-ccm";
+		reg = <0x0021b000 0x1000>;
+	};
+
+	pwm: pwm@00208000 {
+		#pwm-cells = <2>;
+		compatible = "fsl,imx1-pwm";
+		reg = <0x00208000 0x1000>;
+		interrupts = <34>;
+		clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+		clock-names = "ipg", "per";
+	};
diff --git a/Bindings/clock/imx21-clock.txt b/Bindings/clock/imx21-clock.txt
new file mode 100644
index 000000000000..c3b0db437c48
--- /dev/null
+++ b/Bindings/clock/imx21-clock.txt
@@ -0,0 +1,28 @@
+* Clock bindings for Freescale i.MX21
+
+Required properties:
+- compatible  : Should be "fsl,imx21-ccm".
+- reg         : Address and length of the register set.
+- interrupts  : Should contain CCM interrupt.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+for the full list of i.MX21 clock IDs.
+
+Examples:
+	clks: ccm@10027000{
+		compatible = "fsl,imx21-ccm";
+		reg = <0x10027000 0x800>;
+		#clock-cells = <1>;
+	};
+
+	uart1: serial@1000a000 {
+		compatible = "fsl,imx21-uart";
+		reg = <0x1000a000 0x1000>;
+		interrupts = <20>;
+		clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+			 <&clks IMX21_CLK_PER1>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+	};
diff --git a/Bindings/clock/imx6sx-clock.txt b/Bindings/clock/imx6sx-clock.txt
new file mode 100644
index 000000000000..22362b9b7ba3
--- /dev/null
+++ b/Bindings/clock/imx6sx-clock.txt
@@ -0,0 +1,13 @@
+* Clock bindings for Freescale i.MX6 SoloX
+
+Required properties:
+- compatible: Should be "fsl,imx6sx-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+  entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sx-clock.h
+for the full list of i.MX6 SoloX clock IDs.
diff --git a/Bindings/clock/lsi,axm5516-clks.txt b/Bindings/clock/lsi,axm5516-clks.txt
new file mode 100644
index 000000000000..3ce97cfe999b
--- /dev/null
+++ b/Bindings/clock/lsi,axm5516-clks.txt
@@ -0,0 +1,29 @@
+AXM5516 clock driver bindings
+-----------------------------
+
+Required properties :
+- compatible : shall contain "lsi,axm5516-clks"
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+
+The consumer specifies the desired clock by having the clock ID in its "clocks"
+phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of
+supported clock IDs.
+
+Example:
+
+	clks: clock-controller@2010020000 {
+		compatible = "lsi,axm5516-clks";
+		#clock-cells = <1>;
+		reg = <0x20 0x10020000 0 0x20000>;
+	};
+
+	serial0: uart@2010080000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x20 0x10080000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks AXXIA_CLK_PER>;
+		clock-names = "apb_pclk";
+	};
+																																};
+
diff --git a/Bindings/clock/moxa,moxart-clock.txt b/Bindings/clock/moxa,moxart-clock.txt
new file mode 100644
index 000000000000..fedea84314a1
--- /dev/null
+++ b/Bindings/clock/moxa,moxart-clock.txt
@@ -0,0 +1,48 @@
+Device Tree Clock bindings for arch-moxart
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+MOXA ART SoCs allow to determine PLL output and APB frequencies
+by reading registers holding multiplier and divisor information.
+
+
+PLL:
+
+Required properties:
+- compatible : Must be "moxa,moxart-pll-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle + clock-specifier for the parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+APB:
+
+Required properties:
+- compatible : Must be "moxa,moxart-apb-clock"
+- #clock-cells : Should be 0
+- reg : Should contain registers location and length
+- clocks : Should contain phandle + clock-specifier for the parent clock
+
+Optional properties:
+- clock-output-names : Should contain clock name
+
+
+For example:
+
+	clk_pll: clk_pll@98100000 {
+		compatible = "moxa,moxart-pll-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+	};
+
+	clk_apb: clk_apb@98100000 {
+		compatible = "moxa,moxart-apb-clock";
+		#clock-cells = <0>;
+		reg = <0x98100000 0x34>;
+		clocks = <&clk_pll>;
+	};
diff --git a/Bindings/clock/qoriq-clock.txt b/Bindings/clock/qoriq-clock.txt
new file mode 100644
index 000000000000..5666812fc42b
--- /dev/null
+++ b/Bindings/clock/qoriq-clock.txt
@@ -0,0 +1,142 @@
+* Clock Block on Freescale CoreNet Platforms
+
+Freescale CoreNet chips take primary clocking input from the external
+SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+multiple phase locked loops (PLL) to create a variety of frequencies
+which can then be passed to a variety of internal logic, including
+cores and peripheral IP blocks.
+Please refer to the Reference Manual for details.
+
+All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+which the chip complies.
+
+Chassis Version		Example Chips
+---------------		-------------
+1.0			p4080, p5020, p5040
+2.0			t4240, b4860, t1040
+
+1. Clock Block Binding
+
+Required properties:
+- compatible: Should contain a specific clock block compatible string
+	and a single chassis clock compatible string.
+	Clock block strings include, but not limited to, one of the:
+	* "fsl,p2041-clockgen"
+	* "fsl,p3041-clockgen"
+	* "fsl,p4080-clockgen"
+	* "fsl,p5020-clockgen"
+	* "fsl,p5040-clockgen"
+	* "fsl,t4240-clockgen"
+	* "fsl,b4420-clockgen"
+	* "fsl,b4860-clockgen"
+	Chassis clock strings include:
+	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
+	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
+- reg: Describes the address of the device's resources within the
+	address space defined by its parent bus, and resource zero
+	represents the clock register set
+- clock-frequency: Input system clock frequency
+
+Recommended properties:
+- ranges: Allows valid translation between child's address space and
+	parent's. Must be present if the device has sub-nodes.
+- #address-cells: Specifies the number of cells used to represent
+	physical base addresses.  Must be present if the device has
+	sub-nodes and set to 1 if present
+- #size-cells: Specifies the number of cells used to represent
+	the size of an address. Must be present if the device has
+	sub-nodes and set to 1 if present
+
+2. Clock Provider/Consumer Binding
+
+Most of the bindings are from the common clock binding[1].
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : Should include one of the following:
+	* "fsl,qoriq-core-pll-1.0" for core PLL clocks (v1.0)
+	* "fsl,qoriq-core-pll-2.0" for core PLL clocks (v2.0)
+	* "fsl,qoriq-core-mux-1.0" for core mux clocks (v1.0)
+	* "fsl,qoriq-core-mux-2.0" for core mux clocks (v2.0)
+	* "fsl,qoriq-sysclk-1.0": for input system clock (v1.0).
+		It takes parent's clock-frequency as its clock.
+	* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
+		It takes parent's clock-frequency as its clock.
+- #clock-cells: From common clock binding. The number of cells in a
+	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
+	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
+	For "fsl,qoriq-core-pll-[1,2].0" clocks, the single
+	clock-specifier cell may take the following values:
+	* 0 - equal to the PLL frequency
+	* 1 - equal to the PLL frequency divided by 2
+	* 2 - equal to the PLL frequency divided by 4
+
+Recommended properties:
+- clocks: Should be the phandle of input parent clock
+- clock-names: From common clock binding, indicates the clock name
+- clock-output-names: From common clock binding, indicates the names of
+	output clocks
+- reg: Should be the offset and length of clock block base address.
+	The length should be 4.
+
+Example for clock block and clock provider:
+/ {
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		ranges = <0x0 0xe1000 0x1000>;
+		clock-frequency = <133333333>;
+		reg = <0xe1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysclk: sysclk {
+			#clock-cells = <0>;
+			compatible = "fsl,qoriq-sysclk-1.0";
+			clock-output-names = "sysclk";
+		};
+
+		pll0: pll0@800 {
+			#clock-cells = <1>;
+			reg = <0x800 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll0", "pll0-div2";
+		};
+
+		pll1: pll1@820 {
+			#clock-cells = <1>;
+			reg = <0x820 0x4>;
+			compatible = "fsl,qoriq-core-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll1", "pll1-div2";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 0x4>;
+			compatible = "fsl,qoriq-core-mux-1.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+			clock-output-names = "cmux1";
+		};
+	};
+  }
+
+Example for clock consumer:
+
+/ {
+	cpu0: PowerPC,e5500@0 {
+		...
+		clocks = <&mux0>;
+		...
+	};
+  }
diff --git a/Bindings/clock/renesas,r8a7740-cpg-clocks.txt b/Bindings/clock/renesas,r8a7740-cpg-clocks.txt
new file mode 100644
index 000000000000..2c03302f86ed
--- /dev/null
+++ b/Bindings/clock/renesas,r8a7740-cpg-clocks.txt
@@ -0,0 +1,41 @@
+These bindings should be considered EXPERIMENTAL for now.
+
+* Renesas R8A7740  Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A7740 SoC. It includes three PLLs
+and several fixed ratio and variable ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be "renesas,r8a7740-cpg-clocks"
+
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the three parent clocks
+  - #clock-cells: Must be 1
+  - clock-output-names: The names of the clocks. Supported clocks are
+    "system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b",
+    "m1", "hp", "hpp", "usbp", "s", "zb", "m3", and "cp".
+
+  - renesas,mode: board-specific settings of the MD_CK* bits
+
+
+Example
+-------
+
+cpg_clocks: cpg_clocks@e6150000 {
+        compatible = "renesas,r8a7740-cpg-clocks";
+        reg = <0xe6150000 0x10000>;
+        clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
+        #clock-cells = <1>;
+        clock-output-names = "system", "pllc0", "pllc1",
+                             "pllc2", "r",
+                             "usb24s",
+                             "i", "zg", "b", "m1", "hp",
+                             "hpp", "usbp", "s", "zb", "m3",
+                             "cp";
+};
+
+&cpg_clocks {
+	renesas,mode = <0x05>;
+};
diff --git a/Bindings/clock/renesas,r8a7779-cpg-clocks.txt b/Bindings/clock/renesas,r8a7779-cpg-clocks.txt
new file mode 100644
index 000000000000..ed3c8cb12f4e
--- /dev/null
+++ b/Bindings/clock/renesas,r8a7779-cpg-clocks.txt
@@ -0,0 +1,27 @@
+* Renesas R8A7779 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A7779. It includes one PLL and
+several fixed ratio dividers
+
+Required Properties:
+
+  - compatible: Must be "renesas,r8a7779-cpg-clocks"
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the parent clock
+  - #clock-cells: Must be 1
+  - clock-output-names: The names of the clocks. Supported clocks are "plla",
+    "z", "zs", "s", "s1", "p", "b", "out".
+
+
+Example
+-------
+
+	cpg_clocks: cpg_clocks@ffc80000 {
+		compatible = "renesas,r8a7779-cpg-clocks";
+		reg = <0 0xffc80000 0 0x30>;
+		clocks = <&extal_clk>;
+		#clock-cells = <1>;
+		clock-output-names = "plla", "z", "zs", "s", "s1", "p",
+		                     "b", "out";
+	};
diff --git a/Bindings/clock/renesas,rz-cpg-clocks.txt b/Bindings/clock/renesas,rz-cpg-clocks.txt
new file mode 100644
index 000000000000..98a257492522
--- /dev/null
+++ b/Bindings/clock/renesas,rz-cpg-clocks.txt
@@ -0,0 +1,29 @@
+* Renesas RZ Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable
+CPU and GPU clocks, and several fixed ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be one of
+    - "renesas,r7s72100-cpg-clocks" for the r7s72100 CPG
+    - "renesas,rz-cpg-clocks" for the generic RZ CPG
+  - reg: Base address and length of the memory resource used by the CPG
+  - clocks: References to possible parent clocks. Order must match clock modes
+    in the datasheet. For the r7s72100, this is extal, usb_x1.
+  - #clock-cells: Must be 1
+  - clock-output-names: The names of the clocks. Supported clocks are "pll",
+    "i", and "g"
+
+
+Example
+-------
+
+	cpg_clocks: cpg_clocks@fcfe0000 {
+		#clock-cells = <1>;
+		compatible = "renesas,r7s72100-cpg-clocks",
+			     "renesas,rz-cpg-clocks";
+		reg = <0xfcfe0000 0x18>;
+		clocks = <&extal_clk>, <&usb_x1_clk>;
+		clock-output-names = "pll", "i", "g";
+	};
diff --git a/Bindings/clock/rockchip,rk3188-cru.txt b/Bindings/clock/rockchip,rk3188-cru.txt
new file mode 100644
index 000000000000..0c2bf5eba43e
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3188-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3188/RK3066 Clock and Reset Unit
+
+The RK3188/RK3066 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
+			"rockchip,rk3066a-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+Similar macros exist for the reset sources in these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "xin27m" - 27mhz crystal input on rk3066 - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_cif0" - external camera clock - optional,
+ - "ext_rmii" - external RMII clock - optional,
+ - "ext_jtag" - externalJTAG clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};
diff --git a/Bindings/clock/rockchip,rk3288-cru.txt b/Bindings/clock/rockchip,rk3288-cru.txt
new file mode 100644
index 000000000000..c9fbb76573e1
--- /dev/null
+++ b/Bindings/clock/rockchip,rk3288-cru.txt
@@ -0,0 +1,61 @@
+* Rockchip RK3288 Clock and Reset Unit
+
+The RK3288 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3288-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_edp_24m" - external display port clock - optional,
+ - "ext_vip" - external VIP clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};
diff --git a/Bindings/clock/samsung,s3c2410-clock.txt b/Bindings/clock/samsung,s3c2410-clock.txt
new file mode 100644
index 000000000000..822505e715ae
--- /dev/null
+++ b/Bindings/clock/samsung,s3c2410-clock.txt
@@ -0,0 +1,50 @@
+* Samsung S3C2410 Clock Controller
+
+The S3C2410 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2410,
+s3c2440 and s3c2442 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
+  - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
+  - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2410.h header and can be used in device
+tree sources.
+
+External clocks:
+
+The xti clock used as input for the plls is generated outside the SoC. It is
+expected that is are defined using standard clock bindings with a
+clock-output-names value of "xti".
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2410-clock";
+		reg = <0x4c000000 0x20>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
+		status = "disabled";
+	};
diff --git a/Bindings/clock/samsung,s3c2412-clock.txt b/Bindings/clock/samsung,s3c2412-clock.txt
new file mode 100644
index 000000000000..2b430960ba47
--- /dev/null
+++ b/Bindings/clock/samsung,s3c2412-clock.txt
@@ -0,0 +1,50 @@
+* Samsung S3C2412 Clock Controller
+
+The S3C2412 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to the s3c2412
+and s3c2413 SoCs in the s3c24x family.
+
+Required Properties:
+
+- compatible: should be "samsung,s3c2412-clock"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2412.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2412-clock";
+		reg = <0x4c000000 0x20>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2412-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+			 <&clocks SCLK_UART>;
+		status = "disabled";
+	};
diff --git a/Bindings/clock/samsung,s3c2443-clock.txt b/Bindings/clock/samsung,s3c2443-clock.txt
new file mode 100644
index 000000000000..e67bb05478af
--- /dev/null
+++ b/Bindings/clock/samsung,s3c2443-clock.txt
@@ -0,0 +1,56 @@
+* Samsung S3C2443 Clock Controller
+
+The S3C2443 clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the s3c24x family starting with the s3c2443.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
+  - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
+  - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular SoC.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s3c2443.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xti" - crystal input - required,
+ - "ext" - external clock source - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_uart" - external uart clock - optional,
+
+Example: Clock controller node:
+
+	clocks: clock-controller@4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	serial@50004000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
+		status = "disabled";
+	};
diff --git a/Bindings/clock/samsung,s5pv210-clock.txt b/Bindings/clock/samsung,s5pv210-clock.txt
new file mode 100644
index 000000000000..effd9401c133
--- /dev/null
+++ b/Bindings/clock/samsung,s5pv210-clock.txt
@@ -0,0 +1,78 @@
+* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
+
+Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
+controller, which generates and supplies clock to various controllers
+within the SoC.
+
+Required Properties:
+
+- compatible: should be one of following:
+	- "samsung,s5pv210-clock" : for clock controller of Samsung
+	  S5PC110/S5PV210 SoCs,
+	- "samsung,s5p6442-clock" : for clock controller of Samsung
+	  S5P6442 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
+the SoC,
+ - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
+pins of the SoC,
+
+A subset of above clocks available on given board shall be specified in
+board device tree, including the system base clock, as selected by XOM[0]
+pin of the SoC. Refer to generic fixed rate clock bindings
+documentation[1] for more information how to specify these clocks.
+
+[1] Documentation/devicetree/bindings/clock/fixed-clock.txt
+
+Example: Clock controller node:
+
+	clock: clock-controller@7e00f000 {
+		compatible = "samsung,s5pv210-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+Example: Required external clocks:
+
+	xxti: clock-xxti {
+		compatible = "fixed-clock";
+		clock-output-names = "xxti";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	xusbxti: clock-xusbxti {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	uart0: serial@e2900000 {
+		compatible = "samsung,s5pv210-uart";
+		reg = <0xe2900000 0x400>;
+		interrupt-parent = <&vic1>;
+		interrupts = <10>;
+		clock-names = "uart", "clk_uart_baud0",
+				"clk_uart_baud1";
+		clocks = <&clocks UART0>, <&clocks UART0>,
+				<&clocks SCLK_UART0>;
+		status = "disabled";
+	};
diff --git a/Bindings/clock/st/st,clkgen-divmux.txt b/Bindings/clock/st/st,clkgen-divmux.txt
new file mode 100644
index 000000000000..6247652044a0
--- /dev/null
+++ b/Bindings/clock/st/st,clkgen-divmux.txt
@@ -0,0 +1,49 @@
+Binding for a ST divider and multiplexer clock driver.
+
+This binding uses the common clock binding[1].
+Base address is located to the parent node. See clock binding[2]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,clkgena-divmux-c65-hs",	"st,clkgena-divmux"
+	"st,clkgena-divmux-c65-ls",	"st,clkgena-divmux"
+	"st,clkgena-divmux-c32-odf0",	"st,clkgena-divmux"
+	"st,clkgena-divmux-c32-odf1",	"st,clkgena-divmux"
+	"st,clkgena-divmux-c32-odf2",	"st,clkgena-divmux"
+	"st,clkgena-divmux-c32-odf3",	"st,clkgena-divmux"
+
+- #clock-cells : From common clock binding; shall be set to 1.
+
+- clocks : From common clock binding
+
+- clock-output-names : From common clock binding.
+
+Example:
+
+	clockgen-a@fd345000 {
+		reg = <0xfd345000 0xb50>;
+
+		clk_m_a1_div1: clk-m-a1-div1 {
+			#clock-cells = <1>;
+			compatible = "st,clkgena-divmux-c32-odf1",
+				     "st,clkgena-divmux";
+
+			clocks = <&clk_m_a1_osc_prediv>,
+				 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+				 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+			clock-output-names = "clk-m-rx-icn-ts",
+					     "clk-m-rx-icn-vdp-0",
+					     "", /* unused */
+					     "clk-m-prv-t1-bus",
+					     "clk-m-icn-reg-12",
+					     "clk-m-icn-reg-10",
+					     "", /* unused */
+					     "clk-m-icn-st231";
+		};
+	};
+
diff --git a/Bindings/clock/st/st,clkgen-mux.txt b/Bindings/clock/st/st,clkgen-mux.txt
new file mode 100644
index 000000000000..f1fa91c68768
--- /dev/null
+++ b/Bindings/clock/st/st,clkgen-mux.txt
@@ -0,0 +1,36 @@
+Binding for a ST multiplexed clock driver.
+
+This binding supports only simple indexed multiplexers, it does not
+support table based parent index to hardware value translations.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,stih416-clkgenc-vcc-hd",	"st,clkgen-mux"
+	"st,stih416-clkgenf-vcc-fvdp",	"st,clkgen-mux"
+	"st,stih416-clkgenf-vcc-hva", 	"st,clkgen-mux"
+	"st,stih416-clkgenf-vcc-hd",	"st,clkgen-mux"
+	"st,stih416-clkgenf-vcc-sd",	"st,clkgen-mux"
+	"st,stih415-clkgen-a9-mux",	"st,clkgen-mux"
+	"st,stih416-clkgen-a9-mux",	"st,clkgen-mux"
+	"st,stih407-clkgen-a9-mux",	"st,clkgen-mux"
+
+- #clock-cells : from common clock binding; shall be set to 0.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+Example:
+
+	clk_m_hva: clk-m-hva@fd690868 {
+		#clock-cells = <0>;
+		compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
+		reg = <0xfd690868 4>;
+
+		clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
+	};
diff --git a/Bindings/clock/st/st,clkgen-pll.txt b/Bindings/clock/st/st,clkgen-pll.txt
new file mode 100644
index 000000000000..efb51cf0c845
--- /dev/null
+++ b/Bindings/clock/st/st,clkgen-pll.txt
@@ -0,0 +1,51 @@
+Binding for a ST pll clock driver.
+
+This binding uses the common clock binding[1].
+Base address is located to the parent node. See clock binding[2]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,clkgena-prediv-c65",	"st,clkgena-prediv"
+	"st,clkgena-prediv-c32",	"st,clkgena-prediv"
+
+	"st,clkgena-plls-c65"
+	"st,plls-c32-a1x-0",		"st,clkgen-plls-c32"
+	"st,plls-c32-a1x-1",		"st,clkgen-plls-c32"
+	"st,stih415-plls-c32-a9",	"st,clkgen-plls-c32"
+	"st,stih415-plls-c32-ddr",	"st,clkgen-plls-c32"
+	"st,stih416-plls-c32-a9",	"st,clkgen-plls-c32"
+	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_1",	"st,clkgen-plls-c32"
+
+	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
+	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
+
+- #clock-cells : From common clock binding; shall be set to 1.
+
+- clocks : From common clock binding
+
+- clock-output-names : From common clock binding.
+
+Example:
+
+	clockgen-a@fee62000 {
+		reg = <0xfee62000 0xb48>;
+
+		clk_s_a0_pll: clk-s-a0-pll {
+			#clock-cells = <1>;
+			compatible = "st,clkgena-plls-c65";
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-a0-pll0-hs",
+					     "clk-s-a0-pll0-ls",
+					     "clk-s-a0-pll1";
+		};
+	};
diff --git a/Bindings/clock/st/st,clkgen-prediv.txt b/Bindings/clock/st/st,clkgen-prediv.txt
new file mode 100644
index 000000000000..604766c2619e
--- /dev/null
+++ b/Bindings/clock/st/st,clkgen-prediv.txt
@@ -0,0 +1,36 @@
+Binding for a ST pre-divider clock driver.
+
+This binding uses the common clock binding[1].
+Base address is located to the parent node. See clock binding[2]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,clkgena-prediv-c65",	"st,clkgena-prediv"
+	"st,clkgena-prediv-c32",	"st,clkgena-prediv"
+
+- #clock-cells : From common clock binding; shall be set to 0.
+
+- clocks : From common clock binding
+
+- clock-output-names : From common clock binding.
+
+Example:
+
+	clockgen-a@fd345000 {
+		reg = <0xfd345000 0xb50>;
+
+		clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
+			#clock-cells = <0>;
+			compatible = "st,clkgena-prediv-c32",
+				     "st,clkgena-prediv";
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-m-a2-osc-prediv";
+		};
+	};
+
diff --git a/Bindings/clock/st/st,clkgen-vcc.txt b/Bindings/clock/st/st,clkgen-vcc.txt
new file mode 100644
index 000000000000..109b3eddcb17
--- /dev/null
+++ b/Bindings/clock/st/st,clkgen-vcc.txt
@@ -0,0 +1,61 @@
+Binding for a type of STMicroelectronics clock crossbar (VCC).
+
+The crossbar can take up to 4 input clocks and control up to 16
+output clocks. Not all inputs or outputs have to be in use in a
+particular instantiation. Each output can be individually enabled,
+select any of the input clocks and apply a divide (by 1,2,4 or 8) to
+that selected clock.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,stih416-clkgenc",		"st,vcc"
+	"st,stih416-clkgenf",		"st,vcc"
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 16
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       16 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+	clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
+		#clock-cells = <1>;
+		compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
+		reg = <0xfe8308ac 12>;
+
+		clocks = <&clk_s_vcc_hd>,
+			 <&clockgen_c 1>,
+			 <&clk_s_tmds_fromphy>,
+			 <&clockgen_c 2>;
+
+		clock-output-names  = "clk-s-pix-hdmi",
+				      "clk-s-pix-dvo",
+				      "clk-s-out-dvo",
+				      "clk-s-pix-hd",
+				      "clk-s-hddac",
+				      "clk-s-denc",
+				      "clk-s-sddac",
+				      "clk-s-pix-main",
+				      "clk-s-pix-aux",
+				      "clk-s-stfe-frc-0",
+				      "clk-s-ref-mcru",
+				      "clk-s-slave-mcru",
+				      "clk-s-tmds-hdmi",
+				      "clk-s-hdmi-reject-pll",
+				      "clk-s-thsens";
+	};
+
diff --git a/Bindings/clock/st/st,clkgen.txt b/Bindings/clock/st/st,clkgen.txt
new file mode 100644
index 000000000000..78978f1f5158
--- /dev/null
+++ b/Bindings/clock/st/st,clkgen.txt
@@ -0,0 +1,100 @@
+Binding for a Clockgen hardware block found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+A Clockgen node can contain pll, diviser or multiplexer nodes.
+
+We will find only the base address of the Clockgen, this base
+address is common of all subnode.
+
+	clockgen_node {
+		reg = <>;
+
+		pll_node {
+			...
+		};
+
+		prediv_node {
+			...
+		};
+
+		divmux_node {
+			...
+		};
+
+		quadfs_node {
+			...
+		};
+
+		mux_node {
+			...
+		};
+
+		vcc_node {
+			...
+		};
+
+		flexgen_node {
+			...
+		};
+		...
+	};
+
+This binding uses the common clock binding[1].
+Each subnode should use the binding discribe in [2]..[7]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
+[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
+[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
+[6] Documentation/devicetree/bindings/clock/st,vcc.txt
+[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
+
+
+Required properties:
+- reg : A Base address and length of the register set.
+
+Example:
+
+	clockgen-a@fee62000 {
+
+		reg = <0xfee62000 0xb48>;
+
+		clk_s_a0_pll: clk-s-a0-pll {
+			#clock-cells = <1>;
+			compatible = "st,clkgena-plls-c65";
+
+			clocks = <&clk-sysin>;
+
+			clock-output-names = "clk-s-a0-pll0-hs",
+					     "clk-s-a0-pll0-ls",
+					     "clk-s-a0-pll1";
+		};
+
+		clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
+			#clock-cells = <0>;
+			compatible = "st,clkgena-prediv-c65",
+				     "st,clkgena-prediv";
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-a0-osc-prediv";
+		};
+
+		clk_s_a0_hs: clk-s-a0-hs {
+			#clock-cells = <1>;
+			compatible = "st,clkgena-divmux-c65-hs",
+				     "st,clkgena-divmux";
+
+			clocks = <&clk-s_a0_osc_prediv>,
+				 <&clk-s_a0_pll 0>, /* pll0 hs */
+				 <&clk-s_a0_pll 2>; /* pll1 */
+
+			clock-output-names = "clk-s-fdma-0",
+					     "clk-s-fdma-1",
+					     ""; /* clk-s-jit-sense */
+					     /* fourth output unused */
+		};
+	};
+
diff --git a/Bindings/clock/st/st,flexgen.txt b/Bindings/clock/st/st,flexgen.txt
new file mode 100644
index 000000000000..1d3ace088172
--- /dev/null
+++ b/Bindings/clock/st/st,flexgen.txt
@@ -0,0 +1,119 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+Flexgen structure is a part of Clockgen[1].
+
+Please find an example below:
+
+    Clockgen block diagram
+    -------------------------------------------------------------------
+   |                     Flexgen stucture                              |
+   |                  ---------------------------------------------    |
+   |                 |    -------       --------       --------    |   |
+clk_sysin            |   |       |     |        |     |        |   |   |
+---|-----------------|-->|       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |Pre     |     |Final   |   |   |
+   | |  |PLL0   |    |   |       |     |Dividers|     |Dividers|   |   |
+   | |->|       |    |   |       |     |  x32   |     |  x32   |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   | Clock |     |        |     |        |   |   |
+   | |  |PLL1   |    |   |       |     |        |     |        |   |   |
+   | |->|       |    |   | Cross |     |        |     |        |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        | CLK_DIV[31:0]
+   | |  |       |    |   | Bar   |====>|        |====>|        |===|=========>
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |  |QUADFS |    |   |       |     |        |     |        |   |   |
+   | |->|    ch0|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch1|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch2|----|-->|       |     | DIV    |     | DIV    |   |   |
+   |    |       |    |   |       |     |  1 to  |     |  1 to  |   |   |
+   |    |    ch3|----|-->|       |     |   1024 |     |     64 |   |   |
+   |     -------     |   |       |     |        |     |        |   |   |
+   |                 |    -------       --------       --------    |   |
+   |                   --------------------------------------------    |
+   |                                                                   |
+    -------------------------------------------------------------------
+
+This binding uses the common clock binding[2].
+
+[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,flexgen"
+
+- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
+  outputs).
+
+- clocks : must be set to the parent's phandle. it's could be output clocks of
+  a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
+
+- clock-output-names : List of strings used to name the clock outputs.
+
+Example:
+
+	clk_s_c0_flexgen: clk-s-c0-flexgen {
+
+		#clock-cells = <1>;
+		compatible = "st,flexgen";
+
+		clocks = <&clk_s_c0_pll0 0>,
+			 <&clk_s_c0_pll1 0>,
+			 <&clk_s_c0_quadfs 0>,
+			 <&clk_s_c0_quadfs 1>,
+			 <&clk_s_c0_quadfs 2>,
+			 <&clk_s_c0_quadfs 3>,
+			 <&clk_sysin>;
+
+		clock-output-names = "clk-icn-gpu",
+				     "clk-fdma",
+				     "clk-nand",
+				     "clk-hva",
+				     "clk-proc-stfe",
+				     "clk-proc-tp",
+				     "clk-rx-icn-dmu",
+				     "clk-rx-icn-hva",
+				     "clk-icn-cpu",
+				     "clk-tx-icn-dmu",
+				     "clk-mmc-0",
+				     "clk-mmc-1",
+				     "clk-jpegdec",
+				     "clk-ext2fa9",
+				     "clk-ic-bdisp-0",
+				     "clk-ic-bdisp-1",
+				     "clk-pp-dmu",
+				     "clk-vid-dmu",
+				     "clk-dss-lpc",
+				     "clk-st231-aud-0",
+				     "clk-st231-gp-1",
+				     "clk-st231-dmu",
+				     "clk-icn-lmi",
+				     "clk-tx-icn-disp-1",
+				     "clk-icn-sbc",
+				     "clk-stfe-frc2",
+				     "clk-eth-phy",
+				     "clk-eth-ref-phyclk",
+				     "clk-flash-promip",
+				     "clk-main-disp",
+				     "clk-aux-disp",
+				     "clk-compo-dvp";
+	};
diff --git a/Bindings/clock/st/st,quadfs.txt b/Bindings/clock/st/st,quadfs.txt
new file mode 100644
index 000000000000..cedeb9cc8208
--- /dev/null
+++ b/Bindings/clock/st/st,quadfs.txt
@@ -0,0 +1,48 @@
+Binding for a type of quad channel digital frequency synthesizer found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+This version contains a programmable PLL which can generate up to 216, 432
+or 660MHz (from a 30MHz oscillator input) as the input to the digital
+synthesizers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,stih416-quadfs216",	"st,quadfs"
+  "st,stih416-quadfs432",	"st,quadfs"
+  "st,stih416-quadfs660-E",	"st,quadfs"
+  "st,stih416-quadfs660-F",	"st,quadfs"
+  "st,stih407-quadfs660-C",	"st,quadfs"
+  "st,stih407-quadfs660-D",	"st,quadfs"
+
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 4
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       4 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+	clockgen_e: clockgen-e@fd3208bc {
+                #clock-cells = <1>;
+                compatible = "st,stih416-quadfs660-E", "st,quadfs";
+                reg = <0xfd3208bc 0xB0>;
+
+                clocks = <&clk_sysin>;
+                clock-output-names = "clk-m-pix-mdtp-0",
+				     "clk-m-pix-mdtp-1",
+				     "clk-m-pix-mdtp-2",
+				     "clk-m-mpelpc";
+        };
diff --git a/Bindings/clock/ti-keystone-pllctrl.txt b/Bindings/clock/ti-keystone-pllctrl.txt
new file mode 100644
index 000000000000..3e6a81e99804
--- /dev/null
+++ b/Bindings/clock/ti-keystone-pllctrl.txt
@@ -0,0 +1,20 @@
+* Device tree bindings for Texas Instruments keystone pll controller
+
+The main pll controller used to drive theC66x CorePacs, the switch fabric,
+and a majority of the peripheral clocks (all but the ARM CorePacs, DDR3 and
+the NETCP modules) requires a PLL Controller to manage the various clock
+divisions, gating, and synchronization.
+
+Required properties:
+
+- compatible:		"ti,keystone-pllctrl", "syscon"
+
+- reg:			contains offset/length value for pll controller
+			registers space.
+
+Example:
+
+pllctrl: pll-controller@0x02310000 {
+	compatible = "ti,keystone-pllctrl", "syscon";
+	reg = <0x02310000 0x200>;
+};
diff --git a/Bindings/clock/ti/dra7-atl.txt b/Bindings/clock/ti/dra7-atl.txt
new file mode 100644
index 000000000000..585e8c191f50
--- /dev/null
+++ b/Bindings/clock/ti/dra7-atl.txt
@@ -0,0 +1,96 @@
+Device Tree Clock bindings for ATL (Audio Tracking Logic) of DRA7 SoC.
+
+The ATL IP is used to generate clock to be used to synchronize baseband and
+audio codec. A single ATL IP provides four ATL clock instances sharing the same
+functional clock but can be configured to provide different clocks.
+ATL can maintain a clock averages to some desired frequency based on the bws/aws
+signals - can compensate the drift between the two ws signal.
+
+In order to provide the support for ATL and it's output clocks (which can be used
+internally within the SoC or external components) two sets of bindings is needed:
+
+Clock tree binding:
+This binding uses the common clock binding[1].
+To be able to integrate the ATL clocks with DT clock tree.
+Provides ccf level representation of the ATL clocks to be used by drivers.
+Since the clock instances are part of a single IP this binding is used as a node
+for the DT clock tree, the IP driver is needed to handle the actual configuration
+of the IP.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dra7-atl-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles to functional clock of ATL
+
+Binding for the IP driver:
+This binding is used to configure the IP driver which is going to handle the
+configuration of the IP for the ATL clock instances.
+
+Required properties:
+- compatible : shall be "ti,dra7-atl"
+- reg : base address for the ATL IP
+- ti,provided-clocks : List of phandles to the clocks associated with the ATL
+- clocks : link phandles to functional clock of ATL
+- clock-names : Shall be set to "fck"
+- ti,hwmods : Shall be set to "atl"
+
+Optional properties:
+Configuration of ATL instances:
+- atl{0/1/2/3} {
+	- bws : Baseband word select signal selection
+	- aws : Audio word select signal selection
+};
+
+For valid word select signals, see the dt-bindings/clk/ti-dra7-atl.h include
+file.
+
+Examples:
+/* clock bindings for atl provided clocks */
+atl_clkin0_ck: atl_clkin0_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin1_ck: atl_clkin1_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin2_ck: atl_clkin2_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+atl_clkin3_ck: atl_clkin3_ck {
+	#clock-cells = <0>;
+	compatible = "ti,dra7-atl-clock";
+	clocks = <&atl_gfclk_mux>;
+};
+
+/* binding for the IP */
+atl: atl@4843c000 {
+	compatible = "ti,dra7-atl";
+	reg = <0x4843c000 0x3ff>;
+	ti,hwmods = "atl";
+	ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+				<&atl_clkin2_ck>, <&atl_clkin3_ck>;
+	clocks = <&atl_gfclk_mux>;
+	clock-names = "fck";
+	status = "disabled";
+};
+
+#include <dt-bindings/clk/ti-dra7-atl.h>
+
+&atl {
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
diff --git a/Bindings/crypto/amd-ccp.txt b/Bindings/crypto/amd-ccp.txt
new file mode 100644
index 000000000000..8c61183b41e0
--- /dev/null
+++ b/Bindings/crypto/amd-ccp.txt
@@ -0,0 +1,19 @@
+* AMD Cryptographic Coprocessor driver (ccp)
+
+Required properties:
+- compatible: Should be "amd,ccp-seattle-v1a"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the CCP interrupt
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent
+
+Example:
+	ccp@e0100000 {
+		compatible = "amd,ccp-seattle-v1a";
+		reg = <0 0xe0100000 0 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 3 4>;
+	};
diff --git a/Bindings/crypto/qcom-qce.txt b/Bindings/crypto/qcom-qce.txt
new file mode 100644
index 000000000000..fdd53b184ba8
--- /dev/null
+++ b/Bindings/crypto/qcom-qce.txt
@@ -0,0 +1,25 @@
+Qualcomm crypto engine driver
+
+Required properties:
+
+- compatible  : should be "qcom,crypto-v5.1"
+- reg         : specifies base physical address and size of the registers map
+- clocks      : phandle to clock-controller plus clock-specifier pair
+- clock-names : "iface" clocks register interface
+                "bus" clocks data transfer interface
+                "core" clocks rest of the crypto block
+- dmas        : DMA specifiers for tx and rx dma channels. For more see
+                Documentation/devicetree/bindings/dma/dma.txt
+- dma-names   : DMA request names should be "rx" and "tx"
+
+Example:
+	crypto@fd45a000 {
+		compatible = "qcom,crypto-v5.1";
+		reg = <0xfd45a000 0x6000>;
+		clocks = <&gcc GCC_CE2_AHB_CLK>,
+			 <&gcc GCC_CE2_AXI_CLK>,
+			 <&gcc GCC_CE2_CLK>;
+		clock-names = "iface", "bus", "core";
+		dmas = <&cryptobam 2>, <&cryptobam 3>;
+		dma-names = "rx", "tx";
+	};
diff --git a/Bindings/crypto/samsung-sss.txt b/Bindings/crypto/samsung-sss.txt
new file mode 100644
index 000000000000..a6dafa83c6df
--- /dev/null
+++ b/Bindings/crypto/samsung-sss.txt
@@ -0,0 +1,34 @@
+Samsung SoC SSS (Security SubSystem) module
+
+The SSS module in S5PV210 SoC supports the following:
+-- Feeder (FeedCtrl)
+-- Advanced Encryption Standard (AES)
+-- Data Encryption Standard (DES)/3DES
+-- Public Key Accelerator (PKA)
+-- SHA-1/SHA-256/MD5/HMAC (SHA-1/SHA-256/MD5)/PRNG
+-- PRNG: Pseudo Random Number Generator
+
+The SSS module in Exynos4 (Exynos4210) and
+Exynos5 (Exynos5420 and Exynos5250) SoCs
+supports the following also:
+-- ARCFOUR (ARC4)
+-- True Random Number Generator (TRNG)
+-- Secure Key Manager
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  SSS versions:
+  - "samsung,s5pv210-secss" for S5PV210 SoC.
+  - "samsung,exynos4210-secss" for Exynos4210, Exynos4212, Exynos4412, Exynos5250,
+		Exynos5260 and Exynos5420 SoCs.
+- reg : Offset and length of the register set for the module
+- interrupts : interrupt specifiers of SSS module interrupts, should contain
+		following entries:
+		- first : feed control interrupt (required for all variants),
+		- second : hash interrupt (required only for samsung,s5pv210-secss).
+
+- clocks : list of clock phandle and specifier pairs for all clocks  listed in
+		clock-names property.
+- clock-names : list of device clock input names; should contain one entry
+		"secss".
diff --git a/Bindings/dma/fsl-edma.txt b/Bindings/dma/fsl-edma.txt
new file mode 100644
index 000000000000..191d7bd8a6fe
--- /dev/null
+++ b/Bindings/dma/fsl-edma.txt
@@ -0,0 +1,76 @@
+* Freescale enhanced Direct Memory Access(eDMA) Controller
+
+  The eDMA channels have multiplex capability by programmble memory-mapped
+registers. channels are split into two groups, called DMAMUX0 and DMAMUX1,
+specific DMA request source can only be multiplexed by any channel of certain
+group, DMAMUX0 or DMAMUX1, but not both.
+
+* eDMA Controller
+Required properties:
+- compatible :
+	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
+- reg : Specifies base physical address(s) and size of the eDMA registers.
+	The 1st region is eDMA control register's address and size.
+	The 2nd and the 3rd regions are programmable channel multiplexing
+	control register's address and size.
+- interrupts : A list of interrupt-specifiers, one for each entry in
+	interrupt-names.
+- interrupt-names : Should contain:
+	"edma-tx" - the transmission interrupt
+	"edma-err" - the error interrupt
+- #dma-cells : Must be <2>.
+	The 1st cell specifies the DMAMUX(0 for DMAMUX0 and 1 for DMAMUX1).
+	Specific request source can only be multiplexed by specific channels
+	group called DMAMUX.
+	The 2nd cell specifies the request source(slot) ID.
+	See the SoC's reference manual for all the supported request sources.
+- dma-channels : Number of channels supported by the controller
+- clock-names : A list of channel group clock names. Should contain:
+	"dmamux0" - clock name of mux0 group
+	"dmamux1" - clock name of mux1 group
+- clocks : A list of phandle and clock-specifier pairs, one for each entry in
+	clock-names.
+
+Optional properties:
+- big-endian: If present registers and hardware scatter/gather descriptors
+	of the eDMA are implemented in big endian mode, otherwise in little
+	mode.
+
+
+Examples:
+
+edma0: dma-controller@40018000 {
+	#dma-cells = <2>;
+	compatible = "fsl,vf610-edma";
+	reg = <0x40018000 0x2000>,
+		<0x40024000 0x1000>,
+		<0x40025000 0x1000>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+		<0 9 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "edma-tx", "edma-err";
+	dma-channels = <32>;
+	clock-names = "dmamux0", "dmamux1";
+	clocks = <&clks VF610_CLK_DMAMUX0>,
+		<&clks VF610_CLK_DMAMUX1>;
+};
+
+
+* DMA clients
+DMA client drivers that uses the DMA function must use the format described
+in the dma.txt file, using a two-cell specifier for each channel: the 1st
+specifies the channel group(DMAMUX) in which this request can be multiplexed,
+and the 2nd specifies the request source.
+
+Examples:
+
+sai2: sai@40031000 {
+	compatible = "fsl,vf610-sai";
+	reg = <0x40031000 0x1000>;
+	interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "sai";
+	clocks = <&clks VF610_CLK_SAI2>;
+	dma-names = "tx", "rx";
+	dmas = <&edma0 0 21>,
+		<&edma0 0 20>;
+	status = "disabled";
+};
diff --git a/Bindings/dma/mpc512x-dma.txt b/Bindings/dma/mpc512x-dma.txt
new file mode 100644
index 000000000000..a6511df165c5
--- /dev/null
+++ b/Bindings/dma/mpc512x-dma.txt
@@ -0,0 +1,29 @@
+* Freescale MPC512x and MPC8308 DMA Controller
+
+The DMA controller in Freescale MPC512x and MPC8308 SoCs can move
+blocks of memory contents between memory and peripherals or
+from memory to memory.
+
+Refer to "Generic DMA Controller and DMA request bindings" in
+the dma/dma.txt file for a more detailed description of binding.
+
+Required properties:
+- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma";
+- reg: should contain the DMA controller registers location and length;
+- interrupt for the DMA controller: syntax of interrupt client node
+	is described in interrupt-controller/interrupts.txt file.
+- #dma-cells: the length of the DMA specifier, must be <1>.
+	Each channel of this DMA controller has a peripheral request line,
+	the assignment is fixed in hardware. This one cell
+	in dmas property of a client device represents the channel number.
+
+Example:
+
+	dma0: dma@14000 {
+		compatible = "fsl,mpc5121-dma";
+		reg = <0x14000 0x1800>;
+		interrupts = <65 0x8>;
+		#dma-cells = <1>;
+	};
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Bindings/dma/nbpfaxi.txt b/Bindings/dma/nbpfaxi.txt
new file mode 100644
index 000000000000..d5e2522b9ec1
--- /dev/null
+++ b/Bindings/dma/nbpfaxi.txt
@@ -0,0 +1,61 @@
+* Renesas "Type-AXI" NBPFAXI* DMA controllers
+
+* DMA controller
+
+Required properties
+
+- compatible:	must be one of
+		"renesas,nbpfaxi64dmac1b4"
+		"renesas,nbpfaxi64dmac1b8"
+		"renesas,nbpfaxi64dmac1b16"
+		"renesas,nbpfaxi64dmac4b4"
+		"renesas,nbpfaxi64dmac4b8"
+		"renesas,nbpfaxi64dmac4b16"
+		"renesas,nbpfaxi64dmac8b4"
+		"renesas,nbpfaxi64dmac8b8"
+		"renesas,nbpfaxi64dmac8b16"
+- #dma-cells:	must be 2: the first integer is a terminal number, to which this
+		slave is connected, the second one is flags. Flags is a bitmask
+		with the following bits defined:
+
+#define NBPF_SLAVE_RQ_HIGH	1
+#define NBPF_SLAVE_RQ_LOW	2
+#define NBPF_SLAVE_RQ_LEVEL	4
+
+Optional properties:
+
+You can use dma-channels and dma-requests as described in dma.txt, although they
+won't be used, this information is derived from the compatibility string.
+
+Example:
+
+	dma: dma-controller@48000000 {
+		compatible = "renesas,nbpfaxi64dmac8b4";
+		reg = <0x48000000 0x400>;
+		interrupts = <0 12 0x4
+			      0 13 0x4
+			      0 14 0x4
+			      0 15 0x4
+			      0 16 0x4
+			      0 17 0x4
+			      0 18 0x4
+			      0 19 0x4>;
+		#dma-cells = <2>;
+		dma-channels = <8>;
+		dma-requests = <8>;
+	};
+
+* DMA client
+
+Required properties:
+
+dmas and dma-names are required, as described in dma.txt.
+
+Example:
+
+#include <dt-bindings/dma/nbpfaxi.h>
+
+...
+		dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)
+			&dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+		dma-names = "rx", "tx";
diff --git a/Bindings/dma/qcom_bam_dma.txt b/Bindings/dma/qcom_bam_dma.txt
new file mode 100644
index 000000000000..d75a9d767022
--- /dev/null
+++ b/Bindings/dma/qcom_bam_dma.txt
@@ -0,0 +1,41 @@
+QCOM BAM DMA controller
+
+Required properties:
+- compatible: must contain "qcom,bam-v1.4.0" for MSM8974
+- reg: Address range for DMA registers
+- interrupts: Should contain the one interrupt shared by all channels
+- #dma-cells: must be <1>, the cell in the dmas property of the client device
+  represents the channel number
+- clocks: required clock
+- clock-names: must contain "bam_clk" entry
+- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
+  the secure world.
+
+Example:
+
+	uart-bam: dma@f9984000 = {
+		compatible = "qcom,bam-v1.4.0";
+		reg = <0xf9984000 0x15000>;
+		interrupts = <0 94 0>;
+		clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
+		clock-names = "bam_clk";
+		#dma-cells = <1>;
+		qcom,ee = <0>;
+	};
+
+DMA clients must use the format described in the dma.txt file, using a two cell
+specifier for each channel.
+
+Example:
+	serial@f991e000 {
+		compatible = "qcom,msm-uart";
+		reg = <0xf991e000 0x1000>
+			<0xf9944000 0x19000>;
+		interrupts = <0 108 0>;
+		clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+			<&gcc GCC_BLSP1_AHB_CLK>;
+		clock-names = "core", "iface";
+
+		dmas = <&uart-bam 0>, <&uart-bam 1>;
+		dma-names = "rx", "tx";
+	};
diff --git a/Bindings/dma/rcar-audmapp.txt b/Bindings/dma/rcar-audmapp.txt
new file mode 100644
index 000000000000..9f1d750d76de
--- /dev/null
+++ b/Bindings/dma/rcar-audmapp.txt
@@ -0,0 +1,29 @@
+* R-Car Audio DMAC peri peri Device Tree bindings
+
+Required properties:
+- compatible:	should be "renesas,rcar-audmapp"
+- #dma-cells:	should be <1>, see "dmas" property below
+
+Example:
+	audmapp: audio-dma-pp@0xec740000 {
+		compatible = "renesas,rcar-audmapp";
+		#dma-cells = <1>;
+
+		reg = <0 0xec740000 0 0x200>;
+	};
+
+
+* DMA client
+
+Required properties:
+- dmas:		a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,
+		where SRS/DRS values are fixed handles, specified in the SoC
+		manual as the value that would be written into the PDMACHCR.
+- dma-names:	a list of DMA channel names, one per "dmas" entry
+
+Example:
+
+	dmas = <&audmapp 0x2d00
+		&audmapp 0x3700>;
+	dma-names =  "src0_ssiu0",
+		     "dvc0_ssiu0";
diff --git a/Bindings/dma/renesas,rcar-dmac.txt b/Bindings/dma/renesas,rcar-dmac.txt
new file mode 100644
index 000000000000..df0f48bcf75a
--- /dev/null
+++ b/Bindings/dma/renesas,rcar-dmac.txt
@@ -0,0 +1,98 @@
+* Renesas R-Car DMA Controller Device Tree bindings
+
+Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA
+controller instances named DMAC capable of serving multiple clients. Channels
+can be dedicated to specific clients or shared between a large number of
+clients.
+
+DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
+called MID/RID.
+
+Each DMA client is connected to one dedicated port of the DMAC, identified by
+an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
+256 clients in total. When the number of hardware channels is lower than the
+number of clients to be served, channels must be shared between multiple DMA
+clients. The association of DMA clients to DMAC channels is fully dynamic and
+not described in these device tree bindings.
+
+Required Properties:
+
+- compatible: must contain "renesas,rcar-dmac"
+
+- reg: base address and length of the registers block for the DMAC
+
+- interrupts: interrupt specifiers for the DMAC, one for each entry in
+  interrupt-names.
+- interrupt-names: one entry per channel, named "ch%u", where %u is the
+  channel number ranging from zero to the number of channels minus one.
+
+- clock-names: "fck" for the functional clock
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+  in clock-names.
+- clock-names: must contain "fck" for the functional clock.
+
+- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port
+  connected to the DMA client
+- dma-channels: number of DMA channels
+
+Example: R8A7790 (R-Car H2) SYS-DMACs
+
+	dmac0: dma-controller@e6700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6700000 0 0x20000>;
+		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+			      0 200 IRQ_TYPE_LEVEL_HIGH
+			      0 201 IRQ_TYPE_LEVEL_HIGH
+			      0 202 IRQ_TYPE_LEVEL_HIGH
+			      0 203 IRQ_TYPE_LEVEL_HIGH
+			      0 204 IRQ_TYPE_LEVEL_HIGH
+			      0 205 IRQ_TYPE_LEVEL_HIGH
+			      0 206 IRQ_TYPE_LEVEL_HIGH
+			      0 207 IRQ_TYPE_LEVEL_HIGH
+			      0 208 IRQ_TYPE_LEVEL_HIGH
+			      0 209 IRQ_TYPE_LEVEL_HIGH
+			      0 210 IRQ_TYPE_LEVEL_HIGH
+			      0 211 IRQ_TYPE_LEVEL_HIGH
+			      0 212 IRQ_TYPE_LEVEL_HIGH
+			      0 213 IRQ_TYPE_LEVEL_HIGH
+			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	dmac1: dma-controller@e6720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6720000 0 0x20000>;
+		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+			      0 216 IRQ_TYPE_LEVEL_HIGH
+			      0 217 IRQ_TYPE_LEVEL_HIGH
+			      0 218 IRQ_TYPE_LEVEL_HIGH
+			      0 219 IRQ_TYPE_LEVEL_HIGH
+			      0 308 IRQ_TYPE_LEVEL_HIGH
+			      0 309 IRQ_TYPE_LEVEL_HIGH
+			      0 310 IRQ_TYPE_LEVEL_HIGH
+			      0 311 IRQ_TYPE_LEVEL_HIGH
+			      0 312 IRQ_TYPE_LEVEL_HIGH
+			      0 313 IRQ_TYPE_LEVEL_HIGH
+			      0 314 IRQ_TYPE_LEVEL_HIGH
+			      0 315 IRQ_TYPE_LEVEL_HIGH
+			      0 316 IRQ_TYPE_LEVEL_HIGH
+			      0 317 IRQ_TYPE_LEVEL_HIGH
+			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
diff --git a/Bindings/dma/sirfsoc-dma.txt b/Bindings/dma/sirfsoc-dma.txt
new file mode 100644
index 000000000000..ecbc96ad36f8
--- /dev/null
+++ b/Bindings/dma/sirfsoc-dma.txt
@@ -0,0 +1,43 @@
+* CSR SiRFSoC DMA controller
+
+See dma.txt first
+
+Required properties:
+- compatible: Should be "sirf,prima2-dmac" or "sirf,marco-dmac"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel
+- #dma-cells: must be <1>. used to represent the number of integer
+    cells in the dmas property of client device.
+- clocks: clock required
+
+Example:
+
+Controller:
+dmac0: dma-controller@b00b0000 {
+	compatible = "sirf,prima2-dmac";
+	reg = <0xb00b0000 0x10000>;
+	interrupts = <12>;
+	clocks = <&clks 24>;
+	#dma-cells = <1>;
+};
+
+
+Client:
+Fill the specific dma request line in dmas. In the below example, spi0 read
+channel request line is 9 of the 2nd dma controller, while write channel uses
+4 of the 2nd dma controller; spi1 read channel request line is 12 of the 1st
+dma controller, while write channel uses 13 of the 1st dma controller:
+
+spi0: spi@b00d0000 {
+	compatible = "sirf,prima2-spi";
+	dmas = <&dmac1 9>,
+		<&dmac1 4>;
+	dma-names = "rx", "tx";
+};
+
+spi1: spi@b0170000 {
+	compatible = "sirf,prima2-spi";
+	dmas = <&dmac0 12>,
+		<&dmac0 13>;
+	dma-names = "rx", "tx";
+};
diff --git a/Bindings/dma/sun6i-dma.txt b/Bindings/dma/sun6i-dma.txt
new file mode 100644
index 000000000000..3e145c1675b1
--- /dev/null
+++ b/Bindings/dma/sun6i-dma.txt
@@ -0,0 +1,45 @@
+Allwinner A31 DMA Controller
+
+This driver follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+
+- compatible:	Must be "allwinner,sun6i-a31-dma"
+- reg:		Should contain the registers base address and length
+- interrupts:	Should contain a reference to the interrupt used by this device
+- clocks:	Should contain a reference to the parent AHB clock
+- resets:	Should contain a reference to the reset controller asserting
+		this device in reset
+- #dma-cells :	Should be 1, a single cell holding a line request number
+
+Example:
+	dma: dma-controller@01c02000 {
+		compatible = "allwinner,sun6i-a31-dma";
+		reg = <0x01c02000 0x1000>;
+		interrupts = <0 50 4>;
+		clocks = <&ahb1_gates 6>;
+		resets = <&ahb1_rst 6>;
+		#dma-cells = <1>;
+	};
+
+Clients:
+
+DMA clients connected to the A31 DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each
+channel: a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The port ID as specified in the datasheet
+
+Example:
+spi2: spi@01c6a000 {
+	compatible = "allwinner,sun6i-a31-spi";
+	reg = <0x01c6a000 0x1000>;
+	interrupts = <0 67 4>;
+	clocks = <&ahb1_gates 22>, <&spi2_clk>;
+	clock-names = "ahb", "mod";
+	dmas = <&dma 25>, <&dma 25>;
+	dma-names = "rx", "tx";
+	resets = <&ahb1_rst 22>;
+};
diff --git a/Bindings/dma/xilinx/xilinx_vdma.txt b/Bindings/dma/xilinx/xilinx_vdma.txt
new file mode 100644
index 000000000000..1405ed071bb4
--- /dev/null
+++ b/Bindings/dma/xilinx/xilinx_vdma.txt
@@ -0,0 +1,75 @@
+Xilinx AXI VDMA engine, it does transfers between memory and video devices.
+It can be configured to have one channel or two channels. If configured
+as two channels, one is to transmit to the video device and another is
+to receive from the video device.
+
+Required properties:
+- compatible: Should be "xlnx,axi-vdma-1.00.a"
+- #dma-cells: Should be <1>, see "dmas" property below
+- reg: Should contain VDMA registers location and length.
+- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
+- dma-channel child node: Should have at least one channel and can have up to
+	two channels per device. This node specifies the properties of each
+	DMA channel (see child node properties below).
+
+Optional properties:
+- xlnx,include-sg: Tells configured for Scatter-mode in
+	the hardware.
+- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
+	It takes following values:
+	{1}, flush both channels
+	{2}, flush mm2s channel
+	{3}, flush s2mm channel
+
+Required child node properties:
+- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
+	"xlnx,axi-vdma-s2mm-channel".
+- interrupts: Should contain per channel VDMA interrupts.
+- xlnx,data-width: Should contain the stream data width, take values
+	{32,64...1024}.
+
+Optional child node properties:
+- xlnx,include-dre: Tells hardware is configured for Data
+	Realignment Engine.
+- xlnx,genlock-mode: Tells Genlock synchronization is
+	enabled/disabled in hardware.
+
+Example:
+++++++++
+
+axi_vdma_0: axivdma@40030000 {
+	compatible = "xlnx,axi-vdma-1.00.a";
+	#dma_cells = <1>;
+	reg = < 0x40030000 0x10000 >;
+	xlnx,num-fstores = <0x8>;
+	xlnx,flush-fsync = <0x1>;
+	dma-channel@40030000 {
+		compatible = "xlnx,axi-vdma-mm2s-channel";
+		interrupts = < 0 54 4 >;
+		xlnx,datawidth = <0x40>;
+	} ;
+	dma-channel@40030030 {
+		compatible = "xlnx,axi-vdma-s2mm-channel";
+		interrupts = < 0 53 4 >;
+		xlnx,datawidth = <0x40>;
+	} ;
+} ;
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
+	where Channel ID is '0' for write/tx and '1' for read/rx
+	channel.
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+++++++++
+
+vdmatest_0: vdmatest@0 {
+	compatible ="xlnx,axi-vdma-test-1.00.a";
+	dmas = <&axi_vdma_0 0
+		&axi_vdma_0 1>;
+	dma-names = "vdma0", "vdma1";
+} ;
diff --git a/Bindings/drm/armada/marvell,dove-lcd.txt b/Bindings/drm/armada/marvell,dove-lcd.txt
new file mode 100644
index 000000000000..46525ea3e646
--- /dev/null
+++ b/Bindings/drm/armada/marvell,dove-lcd.txt
@@ -0,0 +1,30 @@
+Device Tree bindings for Armada DRM CRTC driver
+
+Required properties:
+ - compatible: value should be "marvell,dove-lcd".
+ - reg: base address and size of the LCD controller
+ - interrupts: single interrupt number for the LCD controller
+ - port: video output port with endpoints, as described by graph.txt
+
+Optional properties:
+
+ - clocks: as described by clock-bindings.txt
+ - clock-names: as described by clock-bindings.txt
+	"axiclk" - axi bus clock for pixel clock
+	"plldivider" - pll divider clock for pixel clock
+	"ext_ref_clk0" - external clock 0 for pixel clock
+	"ext_ref_clk1" - external clock 1 for pixel clock
+
+Note: all clocks are optional but at least one must be specified.
+Further clocks may be added in the future according to requirements of
+different SoCs.
+
+Example:
+
+	lcd0: lcd-controller@820000 {
+		compatible = "marvell,dove-lcd";
+		reg = <0x820000 0x1000>;
+		interrupts = <47>;
+		clocks = <&si5351 0>;
+		clock-names = "ext_ref_clk_1";
+	};
diff --git a/Bindings/drm/bridge/ptn3460.txt b/Bindings/drm/bridge/ptn3460.txt
new file mode 100644
index 000000000000..52b93b2c6748
--- /dev/null
+++ b/Bindings/drm/bridge/ptn3460.txt
@@ -0,0 +1,27 @@
+ptn3460 bridge bindings
+
+Required properties:
+	- compatible: "nxp,ptn3460"
+	- reg: i2c address of the bridge
+	- powerdown-gpio: OF device-tree gpio specification
+	- reset-gpio: OF device-tree gpio specification
+	- edid-emulation: The EDID emulation entry to use
+		+-------+------------+------------------+
+		| Value | Resolution | Description      |
+		|   0   |  1024x768  | NXP Generic      |
+		|   1   |  1920x1080 | NXP Generic      |
+		|   2   |  1920x1080 | NXP Generic      |
+		|   3   |  1600x900  | Samsung LTM200KT |
+		|   4   |  1920x1080 | Samsung LTM230HT |
+		|   5   |  1366x768  | NXP Generic      |
+		|   6   |  1600x900  | ChiMei M215HGE   |
+		+-------+------------+------------------+
+
+Example:
+	lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpio = <&gpy2 5 1 0 0>;
+		reset-gpio = <&gpx1 5 1 0 0>;
+		edid-emulation = <5>;
+	};
diff --git a/Bindings/drm/i2c/tda998x.txt b/Bindings/drm/i2c/tda998x.txt
new file mode 100644
index 000000000000..e9e4bce40760
--- /dev/null
+++ b/Bindings/drm/i2c/tda998x.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for the NXP TDA998x HDMI transmitter
+
+Required properties;
+  - compatible: must be "nxp,tda998x"
+
+  - reg: I2C address
+
+Optional properties:
+  - interrupts: interrupt number and trigger type
+	default: polling
+
+  - pinctrl-0: pin control group to be used for
+	screen plug/unplug interrupt.
+
+  - pinctrl-names: must contain a "default" entry.
+
+  - video-ports: 24 bits value which defines how the video controller
+	output is wired to the TDA998x input - default: <0x230145>
+
+Example:
+
+	tda998x: hdmi-encoder {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 2>;		/* falling edge */
+		pinctrl-0 = <&pmx_camera>;
+		pinctrl-names = "default";
+	};
diff --git a/Bindings/drm/msm/gpu.txt b/Bindings/drm/msm/gpu.txt
new file mode 100644
index 000000000000..67d0a58dbb77
--- /dev/null
+++ b/Bindings/drm/msm/gpu.txt
@@ -0,0 +1,52 @@
+Qualcomm adreno/snapdragon GPU
+
+Required properties:
+- compatible: "qcom,adreno-3xx"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the gpu.
+- clocks: device clocks
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "core_clk"
+  * "iface_clk"
+  * "mem_iface_clk"
+- qcom,chipid: gpu chip-id.  Note this may become optional for future
+  devices if we can reliably read the chipid from hw
+- qcom,gpu-pwrlevels: list of operating points
+  - compatible: "qcom,gpu-pwrlevels"
+  - for each qcom,gpu-pwrlevel:
+    - qcom,gpu-freq: requested gpu clock speed
+    - NOTE: downstream android driver defines additional parameters to
+      configure memory bandwidth scaling per OPP.
+
+Example:
+
+/ {
+	...
+
+	gpu: qcom,kgsl-3d0@4300000 {
+		compatible = "qcom,adreno-3xx";
+		reg = <0x04300000 0x20000>;
+		reg-names = "kgsl_3d0_reg_memory";
+		interrupts = <GIC_SPI 80 0>;
+		interrupt-names = "kgsl_3d0_irq";
+		clock-names =
+		    "core_clk",
+		    "iface_clk",
+		    "mem_iface_clk";
+		clocks =
+		    <&mmcc GFX3D_CLK>,
+		    <&mmcc GFX3D_AHB_CLK>,
+		    <&mmcc MMSS_IMEM_AHB_CLK>;
+		qcom,chipid = <0x03020100>;
+		qcom,gpu-pwrlevels {
+			compatible = "qcom,gpu-pwrlevels";
+			qcom,gpu-pwrlevel@0 {
+				qcom,gpu-freq = <450000000>;
+			};
+			qcom,gpu-pwrlevel@1 {
+				qcom,gpu-freq = <27000000>;
+			};
+		};
+	};
+};
diff --git a/Bindings/drm/msm/hdmi.txt b/Bindings/drm/msm/hdmi.txt
new file mode 100644
index 000000000000..aca917fe2ba7
--- /dev/null
+++ b/Bindings/drm/msm/hdmi.txt
@@ -0,0 +1,46 @@
+Qualcomm adreno/snapdragon hdmi output
+
+Required properties:
+- compatible: one of the following
+   * "qcom,hdmi-tx-8660"
+   * "qcom,hdmi-tx-8960"
+- reg: Physical base address and length of the controller's registers
+- reg-names: "core_physical"
+- interrupts: The interrupt signal from the hdmi block.
+- clocks: device clocks
+  See ../clocks/clock-bindings.txt for details.
+- qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
+- qcom,hdmi-tx-ddc-data-gpio: ddc data pin
+- qcom,hdmi-tx-hpd-gpio: hpd pin
+- core-vdda-supply: phandle to supply regulator
+- hdmi-mux-supply: phandle to mux regulator
+
+Optional properties:
+- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
+- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
+
+Example:
+
+/ {
+	...
+
+	hdmi: qcom,hdmi-tx-8960@4a00000 {
+		compatible = "qcom,hdmi-tx-8960";
+		reg-names = "core_physical";
+		reg = <0x04a00000 0x1000>;
+		interrupts = <GIC_SPI 79 0>;
+		clock-names =
+		    "core_clk",
+		    "master_iface_clk",
+		    "slave_iface_clk";
+		clocks =
+		    <&mmcc HDMI_APP_CLK>,
+		    <&mmcc HDMI_M_AHB_CLK>,
+		    <&mmcc HDMI_S_AHB_CLK>;
+		qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
+		qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
+		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+		core-vdda-supply = <&pm8921_hdmi_mvs>;
+		hdmi-mux-supply = <&ext_3p3v>;
+	};
+};
diff --git a/Bindings/drm/msm/mdp.txt b/Bindings/drm/msm/mdp.txt
new file mode 100644
index 000000000000..1a0598e5279d
--- /dev/null
+++ b/Bindings/drm/msm/mdp.txt
@@ -0,0 +1,48 @@
+Qualcomm adreno/snapdragon display controller
+
+Required properties:
+- compatible:
+  * "qcom,mdp" - mdp4
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the display controller.
+- connectors: array of phandles for output device(s)
+- clocks: device clocks
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "core_clk"
+  * "iface_clk"
+  * "lut_clk"
+  * "src_clk"
+  * "hdmi_clk"
+  * "mpd_clk"
+
+Optional properties:
+- gpus: phandle for gpu device
+
+Example:
+
+/ {
+	...
+
+	mdp: qcom,mdp@5100000 {
+		compatible = "qcom,mdp";
+		reg = <0x05100000 0xf0000>;
+		interrupts = <GIC_SPI 75 0>;
+		connectors = <&hdmi>;
+		gpus = <&gpu>;
+		clock-names =
+		    "core_clk",
+		    "iface_clk",
+		    "lut_clk",
+		    "src_clk",
+		    "hdmi_clk",
+		    "mdp_clk";
+		clocks =
+		    <&mmcc MDP_SRC>,
+		    <&mmcc MDP_AHB_CLK>,
+		    <&mmcc MDP_LUT_CLK>,
+		    <&mmcc TV_SRC>,
+		    <&mmcc HDMI_TV_CLK>,
+		    <&mmcc MDP_TV_CLK>;
+	};
+};
diff --git a/Bindings/extcon/extcon-sm5502.txt b/Bindings/extcon/extcon-sm5502.txt
new file mode 100644
index 000000000000..4ecda224955f
--- /dev/null
+++ b/Bindings/extcon/extcon-sm5502.txt
@@ -0,0 +1,23 @@
+
+* SM5502 MUIC (Micro-USB Interface Controller) device
+
+The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device
+which can detect the state of external accessory when external accessory is
+attached or detached and button is pressed or released. It is interfaced to
+the host controller using an I2C interface.
+
+Required properties:
+- compatible: Should be "siliconmitus,sm5502-muic"
+- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from sm5502 are delivered to.
+- interrupts: Interrupt specifiers for detection interrupt sources.
+
+Example:
+
+	sm5502@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		reg = <0x25>;
+	};
diff --git a/Bindings/fuse/nvidia,tegra20-fuse.txt b/Bindings/fuse/nvidia,tegra20-fuse.txt
new file mode 100644
index 000000000000..d8c98c7614d0
--- /dev/null
+++ b/Bindings/fuse/nvidia,tegra20-fuse.txt
@@ -0,0 +1,40 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
+
+Required properties:
+- compatible : should be:
+	"nvidia,tegra20-efuse"
+	"nvidia,tegra30-efuse"
+	"nvidia,tegra114-efuse"
+	"nvidia,tegra124-efuse"
+  Details:
+  nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
+	due to a hardware bug. Tegra20 also lacks certain information which is
+	available in later generations such as fab code, lot code, wafer id,..
+  nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
+	The differences between these SoCs are the size of the efuse array,
+	the location of the spare (OEM programmable) bits and the location of
+	the speedo data.
+- reg: Should contain 1 entry: the entry gives the physical address and length
+       of the fuse registers.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - fuse
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - fuse
+
+Example:
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra20-efuse";
+		reg = <0x7000F800 0x400>,
+		      <0x70000000 0x400>;
+		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+
diff --git a/Bindings/gpio/cirrus,clps711x-mctrl-gpio.txt b/Bindings/gpio/cirrus,clps711x-mctrl-gpio.txt
new file mode 100644
index 000000000000..94ae9f82dcf8
--- /dev/null
+++ b/Bindings/gpio/cirrus,clps711x-mctrl-gpio.txt
@@ -0,0 +1,17 @@
+* ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs
+
+Required properties:
+- compatible: Should contain "cirrus,clps711x-mctrl-gpio".
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+    0 = Active high,
+    1 = Active low.
+
+Example:
+	sysgpio: sysgpio {
+		compatible = "cirrus,ep7312-mctrl-gpio",
+			     "cirrus,clps711x-mctrl-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Bindings/gpio/gpio-zevio.txt b/Bindings/gpio/gpio-zevio.txt
new file mode 100644
index 000000000000..a37bd9ae2730
--- /dev/null
+++ b/Bindings/gpio/gpio-zevio.txt
@@ -0,0 +1,16 @@
+Zevio GPIO controller
+
+Required properties:
+- compatible: Should be "lsi,zevio-gpio"
+- reg: Address and length of the register set for the device
+- #gpio-cells: Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters (currently unused).
+- gpio-controller: Marks the device node as a GPIO controller.
+
+Example:
+	gpio: gpio@90000000 {
+		compatible = "lsi,zevio-gpio";
+		reg = <0x90000000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Bindings/gpio/gpio-zynq.txt b/Bindings/gpio/gpio-zynq.txt
new file mode 100644
index 000000000000..986371a4be2c
--- /dev/null
+++ b/Bindings/gpio/gpio-zynq.txt
@@ -0,0 +1,26 @@
+Xilinx Zynq GPIO controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- #gpio-cells 		: Should be two
+			  - First cell is the GPIO line number
+			  - Second cell is used to specify optional
+			    parameters (unused)
+- compatible		: Should be "xlnx,zynq-gpio-1.0"
+- clocks		: Clock specifier (see clock bindings for details)
+- gpio-controller	: Marks the device node as a GPIO controller.
+- interrupts		: Interrupt specifier (see interrupt bindings for
+			  details)
+- interrupt-parent	: Must be core interrupt controller
+- reg			: Address and length of the register set for the device
+
+Example:
+	gpio@e000a000 {
+		#gpio-cells = <2>;
+		compatible = "xlnx,zynq-gpio-1.0";
+		clocks = <&clkc 42>;
+		gpio-controller;
+		interrupt-parent = <&intc>;
+		interrupts = <0 20 4>;
+		reg = <0xe000a000 0x1000>;
+	};
diff --git a/Bindings/gpio/snps-dwapb-gpio.txt b/Bindings/gpio/snps-dwapb-gpio.txt
new file mode 100644
index 000000000000..dd5d2c0394b1
--- /dev/null
+++ b/Bindings/gpio/snps-dwapb-gpio.txt
@@ -0,0 +1,60 @@
+* Synopsys DesignWare APB GPIO controller
+
+Required properties:
+- compatible : Should contain "snps,dw-apb-gpio"
+- reg : Address and length of the register set for the device.
+- #address-cells : should be 1 (for addressing port subnodes).
+- #size-cells : should be 0 (port subnodes).
+
+The GPIO controller has a configurable number of ports, each of which are
+represented as child nodes with the following properties:
+
+Required properties:
+- compatible : "snps,dw-apb-gpio-port"
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+      0 = active high
+      1 = active low
+- reg : The integer port index of the port, a single cell.
+
+Optional properties:
+- interrupt-controller : The first port may be configured to be an interrupt
+controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt.  Shall be set to 2.  The first cell defines the interrupt number,
+  the second encodes the triger flags encoded as described in
+  Documentation/devicetree/bindings/interrupts.txt
+- interrupt-parent : The parent interrupt controller.
+- interrupts : The interrupt to the parent controller raised when GPIOs
+  generate the interrupts.
+- snps,nr-gpios : The number of pins in the port, a single cell.
+
+Example:
+
+gpio: gpio@20000 {
+	compatible = "snps,dw-apb-gpio";
+	reg = <0x20000 0x1000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	porta: gpio-controller@0 {
+		compatible = "snps,dw-apb-gpio-port";
+		gpio-controller;
+		#gpio-cells = <2>;
+		snps,nr-gpios = <8>;
+		reg = <0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&vic1>;
+		interrupts = <0>;
+	};
+
+	portb: gpio-controller@1 {
+		compatible = "snps,dw-apb-gpio-port";
+		gpio-controller;
+		#gpio-cells = <2>;
+		snps,nr-gpios = <8>;
+		reg = <1>;
+	};
+};
diff --git a/Bindings/gpu/nvidia,gk20a.txt b/Bindings/gpu/nvidia,gk20a.txt
new file mode 100644
index 000000000000..23bfe8e1f7cc
--- /dev/null
+++ b/Bindings/gpu/nvidia,gk20a.txt
@@ -0,0 +1,43 @@
+NVIDIA GK20A Graphics Processing Unit
+
+Required properties:
+- compatible: "nvidia,<chip>-<gpu>"
+  Currently recognized values:
+  - nvidia,tegra124-gk20a
+- reg: Physical base address and length of the controller's registers.
+  Must contain two entries:
+  - first entry for bar0
+  - second entry for bar1
+- interrupts: Must contain an entry for each entry in interrupt-names.
+  See ../interrupt-controller/interrupts.txt for details.
+- interrupt-names: Must include the following entries:
+  - stall
+  - nonstall
+- vdd-supply: regulator for supply voltage.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - gpu
+  - pwr
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - gpu
+
+Example:
+
+	gpu@0,57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		vdd-supply = <&vdd_gpu>;
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		status = "disabled";
+	};
diff --git a/Bindings/gpu/st,stih4xx.txt b/Bindings/gpu/st,stih4xx.txt
new file mode 100644
index 000000000000..2d150c311a05
--- /dev/null
+++ b/Bindings/gpu/st,stih4xx.txt
@@ -0,0 +1,189 @@
+STMicroelectronics stih4xx platforms
+
+- sti-vtg: video timing generator
+  Required properties:
+  - compatible: "st,vtg"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  Optional properties:
+  - interrupts : VTG interrupt number to the CPU.
+  - st,slave: phandle on a slave vtg
+
+- sti-vtac: video timing advanced inter dye communication Rx and TX
+  Required properties:
+  - compatible: "st,vtac-main" or "st,vtac-aux"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+
+- sti-display-subsystem: Master device for DRM sub-components
+  This device must be the parent of all the sub-components and is responsible
+  of bind them.
+  Required properties:
+  - compatible: "st,sti-display-subsystem"
+  - ranges: to allow probing of subdevices
+
+- sti-compositor: frame compositor engine
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-compositor"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - resets: resets to be used by the device
+    See ../reset/reset.txt for details.
+  - reset-names: names of the resets listed in resets property in the same
+    order.
+  - st,vtg: phandle(s) on vtg device (main and aux) nodes.
+
+- sti-tvout: video out hardware block
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-tvout"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - resets: resets to be used by the device
+    See ../reset/reset.txt for details.
+  - reset-names: names of the resets listed in resets property in the same
+    order.
+  - ranges: to allow probing of subdevices
+
+- sti-hdmi: hdmi output block
+  must be a child of sti-tvout
+  Required properties:
+  - compatible: "st,stih<chip>-hdmi";
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - interrupts : HDMI interrupt number to the CPU.
+  - interrupt-names: name of the interrupts listed in interrupts property in
+    the same order
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not.
+
+sti-hda:
+  Required properties:
+  must be a child of sti-tvout
+  - compatible: "st,stih<chip>-hda"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+
+Example:
+
+/ {
+	...
+
+	vtg_main_slave: sti-vtg-main-slave@fe85A800 {
+		compatible	= "st,vtg";
+		reg		= <0xfe85A800 0x300>;
+		interrupts	= <GIC_SPI 175 IRQ_TYPE_NONE>;
+	};
+
+	vtg_main: sti-vtg-main-master@fd348000 {
+		compatible	= "st,vtg";
+		reg		= <0xfd348000 0x400>;
+		st,slave	= <&vtg_main_slave>;
+	};
+
+	vtg_aux_slave: sti-vtg-aux-slave@fd348400 {
+		compatible	= "st,vtg";
+		reg		= <0xfe858200 0x300>;
+		interrupts	= <GIC_SPI 176 IRQ_TYPE_NONE>;
+	};
+
+	vtg_aux: sti-vtg-aux-master@fd348400 {
+		compatible	= "st,vtg";
+		reg		= <0xfd348400 0x400>;
+		st,slave	= <&vtg_aux_slave>;
+	};
+
+
+	sti-vtac-rx-main@fee82800 {
+		compatible	= "st,vtac-main";
+		reg		= <0xfee82800 0x200>;
+		clock-names     = "vtac";
+		clocks          = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>;
+	};
+
+	sti-vtac-rx-aux@fee82a00 {
+		compatible	= "st,vtac-aux";
+		reg		= <0xfee82a00 0x200>;
+		clock-names     = "vtac";
+		clocks          = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>;
+	};
+
+	sti-vtac-tx-main@fd349000 {
+		compatible	= "st,vtac-main";
+		reg		= <0xfd349000 0x200>, <0xfd320000 0x10000>;
+		clock-names     = "vtac";
+		clocks           = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+	};
+
+	sti-vtac-tx-aux@fd349200 {
+		compatible	= "st,vtac-aux";
+		reg		= <0xfd349200 0x200>, <0xfd320000 0x10000>;
+		clock-names     = "vtac";
+		clocks          = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+	};
+
+	sti-display-subsystem {
+		compatible = "st,sti-display-subsystem";
+		ranges;
+
+		sti-compositor@fd340000 {
+			compatible	= "st,stih416-compositor";
+			reg		= <0xfd340000 0x1000>;
+			clock-names	= "compo_main", "compo_aux",
+			                  "pix_main", "pix_aux";
+			clocks          = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>,
+					  <&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>;
+			reset-names     = "compo-main", "compo-aux";
+			resets          = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>;
+			st,vtg		= <&vtg_main>, <&vtg_aux>;
+		};
+
+		sti-tvout@fe000000 {
+			compatible	= "st,stih416-tvout";
+			reg		= <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>;
+			reg-names	= "tvout-reg", "hda-reg", "syscfg";
+			reset-names     = "tvout";
+			resets          = <&softreset STIH416_HDTVOUT_SOFTRESET>;
+			ranges;
+
+			sti-hdmi@fe85c000 {
+				compatible	= "st,stih416-hdmi";
+				reg		= <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
+				reg-names	= "hdmi-reg", "syscfg";
+				interrupts	= <GIC_SPI 173 IRQ_TYPE_NONE>;
+				interrupt-names	= "irq";
+				clock-names	= "pix", "tmds", "phy", "audio";
+				clocks          = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
+				hdmi,hpd-gpio	= <&PIO2 5>;
+			};
+
+			sti-hda@fe85a000 {
+				compatible	= "st,stih416-hda";
+				reg		= <0xfe85a000 0x400>, <0xfe83085c 0x4>;
+				reg-names	= "hda-reg", "video-dacs-ctrl";
+				clock-names	= "pix", "hddac";
+				clocks          = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
+			};
+		};
+	};
+	...
+};
diff --git a/Bindings/graph.txt b/Bindings/graph.txt
new file mode 100644
index 000000000000..1a69c078adf2
--- /dev/null
+++ b/Bindings/graph.txt
@@ -0,0 +1,129 @@
+Common bindings for device graphs
+
+General concept
+---------------
+
+The hierarchical organisation of the device tree is well suited to describe
+control flow to devices, but there can be more complex connections between
+devices that work together to form a logical compound device, following an
+arbitrarily complex graph.
+There already is a simple directed graph between devices tree nodes using
+phandle properties pointing to other nodes to describe connections that
+can not be inferred from device tree parent-child relationships. The device
+tree graph bindings described herein abstract more complex devices that can
+have multiple specifiable ports, each of which can be linked to one or more
+ports of other devices.
+
+These common bindings do not contain any information about the direction or
+type of the connections, they just map their existence. Specific properties
+may be described by specialized bindings depending on the type of connection.
+
+To see how this binding applies to video pipelines, for example, see
+Documentation/device-tree/bindings/media/video-interfaces.txt.
+Here the ports describe data interfaces, and the links between them are
+the connecting data buses. A single port with multiple connections can
+correspond to multiple devices being connected to the same physical bus.
+
+Organisation of ports and endpoints
+-----------------------------------
+
+Ports are described by child 'port' nodes contained in the device node.
+Each port node contains an 'endpoint' subnode for each remote device port
+connected to this port. If a single port is connected to more than one
+remote device, an 'endpoint' child node must be provided for each link.
+If more than one port is present in a device node or there is more than one
+endpoint at a port, or a port node needs to be associated with a selected
+hardware interface, a common scheme using '#address-cells', '#size-cells'
+and 'reg' properties is used number the nodes.
+
+device {
+        ...
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+	        #address-cells = <1>;
+	        #size-cells = <0>;
+		reg = <0>;
+
+                endpoint@0 {
+			reg = <0>;
+			...
+		};
+                endpoint@1 {
+			reg = <1>;
+			...
+		};
+        };
+
+        port@1 {
+		reg = <1>;
+
+		endpoint { ... };
+	};
+};
+
+All 'port' nodes can be grouped under an optional 'ports' node, which
+allows to specify #address-cells, #size-cells properties for the 'port'
+nodes independently from any other child device nodes a device might
+have.
+
+device {
+        ...
+        ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                        ...
+                        endpoint@0 { ... };
+                        endpoint@1 { ... };
+                };
+
+                port@1 { ... };
+        };
+};
+
+Links between endpoints
+-----------------------
+
+Each endpoint should contain a 'remote-endpoint' phandle property that points
+to the corresponding endpoint in the port of the remote device. In turn, the
+remote endpoint should contain a 'remote-endpoint' property. If it has one,
+it must not point to another than the local endpoint. Two endpoints with their
+'remote-endpoint' phandles pointing at each other form a link between the
+containing ports.
+
+device-1 {
+        port {
+                device_1_output: endpoint {
+                        remote-endpoint = <&device_2_input>;
+                };
+        };
+};
+
+device-2 {
+        port {
+                device_2_input: endpoint {
+                        remote-endpoint = <&device_1_output>;
+                };
+        };
+};
+
+
+Required properties
+-------------------
+
+If there is more than one 'port' or more than one 'endpoint' node or 'reg'
+property is present in port and/or endpoint nodes the following properties
+are required in a relevant parent node:
+
+ - #address-cells : number of cells required to define port/endpoint
+                    identifier, should be 1.
+ - #size-cells    : should be zero.
+
+Optional endpoint properties
+----------------------------
+
+- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node.
+
diff --git a/Bindings/hsi/client-devices.txt b/Bindings/hsi/client-devices.txt
new file mode 100644
index 000000000000..104c9a3e57a4
--- /dev/null
+++ b/Bindings/hsi/client-devices.txt
@@ -0,0 +1,44 @@
+Each HSI port is supposed to have one child node, which
+symbols the remote device connected to the HSI port. The
+following properties are standardized for HSI clients:
+
+Required HSI configuration properties:
+
+- hsi-channel-ids:	A list of channel ids
+
+- hsi-rx-mode:		Receiver Bit transmission mode ("stream" or "frame")
+- hsi-tx-mode:		Transmitter Bit transmission mode ("stream" or "frame")
+- hsi-mode:		May be used instead hsi-rx-mode and hsi-tx-mode if
+			the transmission mode is the same for receiver and
+			transmitter
+- hsi-speed-kbps:	Max bit transmission speed in kbit/s
+- hsi-flow:		RX flow type ("synchronized" or "pipeline")
+- hsi-arb-mode:		Arbitration mode for TX frame ("round-robin", "priority")
+
+Optional HSI configuration properties:
+
+- hsi-channel-names:	A list with one name per channel specified in the
+			hsi-channel-ids property
+
+
+Device Tree node example for an HSI client:
+
+hsi-controller {
+	hsi-port {
+		modem: hsi-client {
+			compatible = "nokia,n900-modem";
+
+			hsi-channel-ids = <0>, <1>, <2>, <3>;
+			hsi-channel-names = "mcsaab-control",
+					    "speech-control",
+					    "speech-data",
+					    "mcsaab-data";
+			hsi-speed-kbps = <55000>;
+			hsi-mode = "frame";
+			hsi-flow = "synchronized";
+			hsi-arb-mode = "round-robin";
+
+			/* more client specific properties */
+		};
+	};
+};
diff --git a/Bindings/hsi/nokia-modem.txt b/Bindings/hsi/nokia-modem.txt
new file mode 100644
index 000000000000..8a979780452b
--- /dev/null
+++ b/Bindings/hsi/nokia-modem.txt
@@ -0,0 +1,57 @@
+Nokia modem client bindings
+
+The Nokia modem HSI client follows the common HSI client binding
+and inherits all required properties. The following additional
+properties are needed by the Nokia modem HSI client:
+
+Required properties:
+- compatible:		Should be one of
+      "nokia,n900-modem"
+- hsi-channel-names:	Should contain the following strings
+      "mcsaab-control"
+      "speech-control"
+      "speech-data"
+      "mcsaab-data"
+- gpios:		Should provide a GPIO handler for each GPIO listed in
+                        gpio-names
+- gpio-names:		Should contain the following strings
+      "cmt_apeslpx"
+      "cmt_rst_rq"
+      "cmt_en"
+      "cmt_rst"
+      "cmt_bsi"
+- interrupts:		Should be IRQ handle for modem's reset indication
+
+Example:
+
+&ssi_port {
+	modem: hsi-client {
+		compatible = "nokia,n900-modem";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&modem_pins>;
+
+		hsi-channel-ids = <0>, <1>, <2>, <3>;
+		hsi-channel-names = "mcsaab-control",
+				    "speech-control",
+				    "speech-data",
+				    "mcsaab-data";
+		hsi-speed-kbps = <55000>;
+		hsi-mode = "frame";
+		hsi-flow = "synchronized";
+		hsi-arb-mode = "round-robin";
+
+		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
+
+		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
+			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
+			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
+			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
+			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
+		gpio-names = "cmt_apeslpx",
+			     "cmt_rst_rq",
+			     "cmt_en",
+			     "cmt_rst",
+			     "cmt_bsi";
+	};
+};
diff --git a/Bindings/hsi/omap-ssi.txt b/Bindings/hsi/omap-ssi.txt
new file mode 100644
index 000000000000..f26625e42693
--- /dev/null
+++ b/Bindings/hsi/omap-ssi.txt
@@ -0,0 +1,97 @@
+OMAP SSI controller bindings
+
+OMAP Synchronous Serial Interface (SSI) controller implements a legacy
+variant of MIPI's High Speed Synchronous Serial Interface (HSI).
+
+Required properties:
+- compatible:		Should include "ti,omap3-ssi".
+- reg-names:		Contains the values "sys" and "gdd" (in this order).
+- reg:			Contains a matching register specifier for each entry
+			in reg-names.
+- interrupt-names:	Contains the value "gdd_mpu".
+- interrupts: 		Contains matching interrupt information for each entry
+			in interrupt-names.
+- ranges:		Represents the bus address mapping between the main
+			controller node and the child nodes below.
+- clock-names:		Must include the following entries:
+  "ssi_ssr_fck": The OMAP clock of that name
+  "ssi_sst_fck": The OMAP clock of that name
+  "ssi_ick": The OMAP clock of that name
+- clocks:		Contains a matching clock specifier for each entry in
+			clock-names.
+- #address-cells:	Should be set to <1>
+- #size-cells:		Should be set to <1>
+
+Each port is represented as a sub-node of the ti,omap3-ssi device.
+
+Required Port sub-node properties:
+- compatible:		Should be set to the following value
+			ti,omap3-ssi-port (applicable to OMAP34xx devices)
+- reg-names:		Contains the values "tx" and "rx" (in this order).
+- reg:			Contains a matching register specifier for each entry
+			in reg-names.
+- interrupt-parent	Should be a phandle for the interrupt controller
+- interrupts:		Should contain interrupt specifiers for mpu interrupts
+			0 and 1 (in this order).
+- ti,ssi-cawake-gpio:	Defines which GPIO pin is used to signify CAWAKE
+			events for the port. This is an optional board-specific
+			property. If it's missing the port will not be
+			enabled.
+
+Example for Nokia N900:
+
+ssi-controller@48058000 {
+	compatible = "ti,omap3-ssi";
+
+	/* needed until hwmod is updated to use the compatible string */
+	ti,hwmods = "ssi";
+
+	reg = <0x48058000 0x1000>,
+	      <0x48059000 0x1000>;
+	reg-names = "sys",
+		    "gdd";
+
+	interrupts = <55>;
+	interrupt-names = "gdd_mpu";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	ssi-port@4805a000 {
+		compatible = "ti,omap3-ssi-port";
+
+		reg = <0x4805a000 0x800>,
+		      <0x4805a800 0x800>;
+		reg-names = "tx",
+			    "rx";
+
+		interrupt-parent = <&intc>;
+		interrupts = <67>,
+			     <68>;
+
+		ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+	}
+
+	ssi-port@4805a000 {
+		compatible = "ti,omap3-ssi-port";
+
+		reg = <0x4805b000 0x800>,
+		      <0x4805b800 0x800>;
+		reg-names = "tx",
+			    "rx";
+
+		interrupt-parent = <&intc>;
+		interrupts = <69>,
+			     <70>;
+
+		status = "disabled"; /* second port is not used on N900 */
+	}
+}
diff --git a/Bindings/hwmon/ibmpowernv.txt b/Bindings/hwmon/ibmpowernv.txt
new file mode 100644
index 000000000000..f93242be60a1
--- /dev/null
+++ b/Bindings/hwmon/ibmpowernv.txt
@@ -0,0 +1,23 @@
+IBM POWERNV platform sensors
+----------------------------
+
+Required node properties:
+- compatible: must be one of
+		"ibm,opal-sensor-cooling-fan"
+		"ibm,opal-sensor-amb-temp"
+		"ibm,opal-sensor-power-supply"
+		"ibm,opal-sensor-power"
+- sensor-id: an opaque id provided by the firmware to the kernel, identifies a
+	     given sensor and its attribute data
+
+Example sensors node:
+
+cooling-fan#8-data {
+	sensor-id = <0x7052107>;
+	compatible = "ibm,opal-sensor-cooling-fan";
+};
+
+amb-temp#1-thrs {
+	sensor-id = <0x5096000>;
+	compatible = "ibm,opal-sensor-amb-temp";
+};
diff --git a/Bindings/hwmon/pwm-fan.txt b/Bindings/hwmon/pwm-fan.txt
new file mode 100644
index 000000000000..610757ce4492
--- /dev/null
+++ b/Bindings/hwmon/pwm-fan.txt
@@ -0,0 +1,12 @@
+Bindings for a fan connected to the PWM lines
+
+Required properties:
+- compatible	: "pwm-fan"
+- pwms		: the PWM that is used to control the PWM fan
+
+Example:
+	pwm-fan {
+		compatible = "pwm-fan";
+		status = "okay";
+		pwms = <&pwm 0 10000 0>;
+	};
diff --git a/Bindings/i2c/i2c-cadence.txt b/Bindings/i2c/i2c-cadence.txt
new file mode 100644
index 000000000000..7cb0b5608f49
--- /dev/null
+++ b/Bindings/i2c/i2c-cadence.txt
@@ -0,0 +1,24 @@
+Binding for the Cadence I2C controller
+
+Required properties:
+  - reg: Physical base address and size of the controller's register area.
+  - compatible: Compatibility string. Must be 'cdns,i2c-r1p10'.
+  - clocks: Input clock specifier. Refer to common clock bindings.
+  - interrupts: Interrupt specifier. Refer to interrupt bindings.
+  - #address-cells: Should be 1.
+  - #size-cells: Should be 0.
+
+Optional properties:
+  - clock-frequency: Desired operating frequency, in Hz, of the bus.
+  - clock-names: Input clock name, should be 'pclk'.
+
+Example:
+	i2c@e0004000 {
+		compatible = "cdns,i2c-r1p10";
+		clocks = <&clkc 38>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xe0004000 0x1000>;
+		clock-frequency = <400000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Bindings/i2c/i2c-cros-ec-tunnel.txt b/Bindings/i2c/i2c-cros-ec-tunnel.txt
new file mode 100644
index 000000000000..898f030eba62
--- /dev/null
+++ b/Bindings/i2c/i2c-cros-ec-tunnel.txt
@@ -0,0 +1,39 @@
+I2C bus that tunnels through the ChromeOS EC (cros-ec)
+======================================================
+On some ChromeOS board designs we've got a connection to the EC (embedded
+controller) but no direct connection to some devices on the other side of
+the EC (like a battery and PMIC).  To get access to those devices we need
+to tunnel our i2c commands through the EC.
+
+The node for this device should be under a cros-ec node like google,cros-ec-spi
+or google,cros-ec-i2c.
+
+
+Required properties:
+- compatible: google,cros-ec-i2c-tunnel
+- google,remote-bus: The EC bus we'd like to talk to.
+
+Optional child nodes:
+- One node per I2C device connected to the tunnelled I2C bus.
+
+
+Example:
+	cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+
+		...
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+			};
+		};
+	}
diff --git a/Bindings/i2c/i2c-efm32.txt b/Bindings/i2c/i2c-efm32.txt
new file mode 100644
index 000000000000..50b25c3da186
--- /dev/null
+++ b/Bindings/i2c/i2c-efm32.txt
@@ -0,0 +1,34 @@
+* Energymicro efm32 i2c controller
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "energymicro,efm32-i2c"
+ - interrupts : the interrupt number
+ - clocks : reference to the module clock
+
+Recommended properties :
+
+ - clock-frequency : maximal I2C bus clock frequency in Hz.
+ - energymicro,location : Decides the location of the USART I/O pins.
+   Allowed range : [0 .. 6]
+
+Example:
+	i2c0: i2c@4000a000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "energymicro,efm32-i2c";
+		reg = <0x4000a000 0x400>;
+		interrupts = <9>;
+		clocks = <&cmu clk_HFPERCLKI2C0>;
+		clock-frequency = <100000>;
+		status = "ok";
+		energymicro,location = <3>;
+
+		eeprom@50 {
+			compatible = "microchip,24c02";
+			reg = <0x50>;
+			pagesize = <16>;
+		};
+	};
+
diff --git a/Bindings/i2c/i2c-rk3x.txt b/Bindings/i2c/i2c-rk3x.txt
new file mode 100644
index 000000000000..dde6c22ce91a
--- /dev/null
+++ b/Bindings/i2c/i2c-rk3x.txt
@@ -0,0 +1,42 @@
+* Rockchip RK3xxx I2C controller
+
+This driver interfaces with the native I2C controller present in Rockchip
+RK3xxx SoCs.
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c" or
+		"rockchip,rk3288-i2c".
+ - interrupts : interrupt number
+ - clocks : parent clock
+
+Required on RK3066, RK3188 :
+
+ - rockchip,grf : the phandle of the syscon node for the general register
+		  file (GRF)
+ - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF)
+   is also required.
+
+Optional properties :
+
+ - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+Example:
+
+aliases {
+	i2c0 = &i2c0;
+}
+
+i2c0: i2c@2002d000 {
+	compatible = "rockchip,rk3188-i2c";
+	reg = <0x2002d000 0x1000>;
+	interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	rockchip,grf = <&grf>;
+
+	clock-names = "i2c";
+	clocks = <&cru PCLK_I2C0>;
+};
diff --git a/Bindings/i2c/i2c-sh_mobile.txt b/Bindings/i2c/i2c-sh_mobile.txt
new file mode 100644
index 000000000000..d2153ce36fa8
--- /dev/null
+++ b/Bindings/i2c/i2c-sh_mobile.txt
@@ -0,0 +1,26 @@
+Device tree configuration for Renesas IIC (sh_mobile) driver
+
+Required properties:
+- compatible      : "renesas,iic-<soctype>". "renesas,rmobile-iic" as fallback
+- reg             : address start and address range size of device
+- interrupts      : interrupt of device
+- clocks          : clock for device
+- #address-cells  : should be <1>
+- #size-cells     : should be <0>
+
+Optional properties:
+- clock-frequency : frequency of bus clock in Hz. Default 100kHz if unset.
+
+Pinctrl properties might be needed, too. See there.
+
+Example:
+
+	iic0: i2c@e6500000 {
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+		clock-frequency = <400000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Bindings/i2c/i2c-sunxi-p2wi.txt b/Bindings/i2c/i2c-sunxi-p2wi.txt
new file mode 100644
index 000000000000..6b765485af7d
--- /dev/null
+++ b/Bindings/i2c/i2c-sunxi-p2wi.txt
@@ -0,0 +1,41 @@
+
+* Allwinner P2WI (Push/Pull 2 Wire Interface) controller
+
+Required properties :
+
+ - reg             : Offset and length of the register set for the device.
+ - compatible      : Should one of the following:
+                     - "allwinner,sun6i-a31-p2wi"
+ - interrupts      : The interrupt line connected to the P2WI peripheral.
+ - clocks          : The gate clk connected to the P2WI peripheral.
+ - resets          : The reset line connected to the P2WI peripheral.
+
+Optional properties :
+
+ - clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the
+default frequency is 100kHz
+
+A P2WI may contain one child node encoding a P2WI slave device.
+
+Slave device properties:
+  Required properties:
+   - reg           : the I2C slave address used during the initialization
+                     process to switch from I2C to P2WI mode
+
+Example:
+
+	p2wi@01f03400 {
+		compatible = "allwinner,sun6i-a31-p2wi";
+		reg = <0x01f03400 0x400>;
+		interrupts = <0 39 4>;
+		clocks = <&apb0_gates 3>;
+		clock-frequency = <6000000>;
+		resets = <&apb0_rst 3>;
+
+		axp221: pmic@68 {
+			compatible = "x-powers,axp221";
+			reg = <0x68>;
+
+			/* ... */
+		};
+	};
diff --git a/Bindings/i2c/qcom,i2c-qup.txt b/Bindings/i2c/qcom,i2c-qup.txt
new file mode 100644
index 000000000000..dc71754a56af
--- /dev/null
+++ b/Bindings/i2c/qcom,i2c-qup.txt
@@ -0,0 +1,40 @@
+Qualcomm Universal Peripheral (QUP) I2C controller
+
+Required properties:
+ - compatible: Should be:
+   * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
+   * "qcom,i2c-qup-v2.1.1" for 8974 v1.
+   * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
+ - reg: Should contain QUP register address and length.
+ - interrupts: Should contain I2C interrupt.
+
+ - clocks: A list of phandles + clock-specifiers, one for each entry in
+   clock-names.
+ - clock-names: Should contain:
+   * "core" for the core clock
+   * "iface" for the AHB clock
+
+ - #address-cells: Should be <1> Address cells for i2c device address
+ - #size-cells: Should be <0> as i2c addresses have no size component
+
+Optional properties:
+ - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
+                    defaults to 100kHz if omitted.
+
+Child nodes should conform to i2c bus binding.
+
+Example:
+
+ i2c@f9924000 {
+ 	compatible = "qcom,i2c-qup-v2.2.1";
+ 	reg = <0xf9924000 0x1000>;
+ 	interrupts = <0 96 0>;
+
+ 	clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ 	clock-names = "core", "iface";
+
+ 	clock-frequency = <355000>;
+
+ 	#address-cells = <1>;
+ 	#size-cells = <0>;
+ };
diff --git a/Bindings/iio/adc/at91_adc.txt b/Bindings/iio/adc/at91_adc.txt
new file mode 100644
index 000000000000..0f813dec5e08
--- /dev/null
+++ b/Bindings/iio/adc/at91_adc.txt
@@ -0,0 +1,87 @@
+* AT91's Analog to Digital Converter (ADC)
+
+Required properties:
+  - compatible: Should be "atmel,<chip>-adc"
+    <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5"
+  - reg: Should contain ADC registers location and length
+  - interrupts: Should contain the IRQ line for the ADC
+  - clock-names: tuple listing input clock names.
+	Required elements: "adc_clk", "adc_op_clk".
+  - clocks: phandles to input clocks.
+  - atmel,adc-channels-used: Bitmask of the channels muxed and enabled for this
+    device
+  - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
+    defined in the datasheet
+  - atmel,adc-vref: Reference voltage in millivolts for the conversions
+  - atmel,adc-res: List of resolutions in bits supported by the ADC. List size
+		   must be two at least.
+  - atmel,adc-res-names: Contains one identifier string for each resolution
+			 in atmel,adc-res property. "lowres" and "highres"
+			 identifiers are required.
+
+Optional properties:
+  - atmel,adc-use-external-triggers: Boolean to enable the external triggers
+  - atmel,adc-use-res: String corresponding to an identifier from
+		       atmel,adc-res-names property. If not specified, the highest
+		       resolution will be used.
+  - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
+  - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
+  - atmel,adc-ts-wires: Number of touchscreen wires. Should be 4 or 5. If this
+                        value is set, then the adc driver will enable touchscreen
+                        support.
+    NOTE: when adc touchscreen is enabled, the adc hardware trigger will be
+          disabled. Since touchscreen will occupy the trigger register.
+  - atmel,adc-ts-pressure-threshold: a pressure threshold for touchscreen. It
+                                     makes touch detection more precise.
+
+Optional trigger Nodes:
+  - Required properties:
+    * trigger-name: Name of the trigger exposed to the user
+    * trigger-value: Value to put in the Trigger register
+      to activate this trigger
+  - Optional properties:
+    * trigger-external: Is the trigger an external trigger?
+
+Examples:
+adc0: adc@fffb0000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "atmel,at91sam9260-adc";
+	reg = <0xfffb0000 0x100>;
+	interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+	clocks = <&adc_clk>, <&adc_op_clk>;
+	clock-names = "adc_clk", "adc_op_clk";
+	atmel,adc-channels-used = <0xff>;
+	atmel,adc-startup-time = <40>;
+	atmel,adc-use-external-triggers;
+	atmel,adc-vref = <3300>;
+	atmel,adc-res = <8 10>;
+	atmel,adc-res-names = "lowres", "highres";
+	atmel,adc-use-res = "lowres";
+
+	trigger@0 {
+		reg = <0>;
+		trigger-name = "external-rising";
+		trigger-value = <0x1>;
+		trigger-external;
+	};
+	trigger@1 {
+		reg = <1>;
+		trigger-name = "external-falling";
+		trigger-value = <0x2>;
+		trigger-external;
+	};
+
+	trigger@2 {
+		reg = <2>;
+		trigger-name = "external-any";
+		trigger-value = <0x3>;
+		trigger-external;
+	};
+
+	trigger@3 {
+		reg = <3>;
+		trigger-name = "continuous";
+		trigger-value = <0x6>;
+	};
+};
diff --git a/Bindings/iio/adc/max1027-adc.txt b/Bindings/iio/adc/max1027-adc.txt
new file mode 100644
index 000000000000..a8770cc6bcad
--- /dev/null
+++ b/Bindings/iio/adc/max1027-adc.txt
@@ -0,0 +1,22 @@
+* Maxim 1027/1029/1031 Analog to Digital Converter (ADC)
+
+Required properties:
+  - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031"
+  - reg: SPI chip select number for the device
+  - interrupt-parent: phandle to the parent interrupt controller
+  see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+  - interrupts: IRQ line for the ADC
+  see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Recommended properties:
+- spi-max-frequency: Definition as per
+                     Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "maxim,max1027";
+	reg = <0>;
+	interrupt-parent = <&gpio5>;
+	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
+	spi-max-frequency = <1000000>;
+};
diff --git a/Bindings/iio/adc/twl4030-madc.txt b/Bindings/iio/adc/twl4030-madc.txt
new file mode 100644
index 000000000000..6bdd21404b57
--- /dev/null
+++ b/Bindings/iio/adc/twl4030-madc.txt
@@ -0,0 +1,24 @@
+* TWL4030 Monitoring Analog to Digital Converter (MADC)
+
+The MADC subsystem in the TWL4030 consists of a 10-bit ADC
+combined with a 16-input analog multiplexer.
+
+Required properties:
+  - compatible: Should contain "ti,twl4030-madc".
+  - interrupts: IRQ line for the MADC submodule.
+  - #io-channel-cells: Should be set to <1>.
+
+Optional properties:
+  - ti,system-uses-second-madc-irq: boolean, set if the second madc irq register
+				    should be used, which is intended to be used
+				    by Co-Processors (e.g. a modem).
+
+Example:
+
+&twl {
+	madc {
+		compatible = "ti,twl4030-madc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
+};
diff --git a/Bindings/iio/adc/vf610-adc.txt b/Bindings/iio/adc/vf610-adc.txt
new file mode 100644
index 000000000000..dcebff1928e1
--- /dev/null
+++ b/Bindings/iio/adc/vf610-adc.txt
@@ -0,0 +1,22 @@
+Freescale vf610 Analog to Digital Converter bindings
+
+The devicetree bindings are for the new ADC driver written for
+vf610/i.MX6slx and upward SoCs from Freescale.
+
+Required properties:
+- compatible: Should contain "fsl,vf610-adc"
+- reg: Offset and length of the register set for the device
+- interrupts: Should contain the interrupt for the device
+- clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock.
+- clock-names: Must contain "adc", matching entry in the clocks property.
+- vref-supply: The regulator supply ADC refrence voltage.
+
+Example:
+adc0: adc@4003b000 {
+	compatible = "fsl,vf610-adc";
+	reg = <0x4003b000 0x1000>;
+	interrupts = <0 53 0x04>;
+	clocks = <&clks VF610_CLK_ADC0>;
+	clock-names = "adc";
+	vref-supply = <&reg_vcc_3v3_mcu>;
+};
diff --git a/Bindings/iio/adc/xilinx-xadc.txt b/Bindings/iio/adc/xilinx-xadc.txt
new file mode 100644
index 000000000000..d9ee909d2b78
--- /dev/null
+++ b/Bindings/iio/adc/xilinx-xadc.txt
@@ -0,0 +1,113 @@
+Xilinx XADC device driver
+
+This binding document describes the bindings for both of them since the
+bindings are very similar. The Xilinx XADC is a ADC that can be found in the
+series 7 FPGAs from Xilinx. The XADC has a DRP interface for communication.
+Currently two different frontends for the DRP interface exist. One that is only
+available on the ZYNQ family as a hardmacro in the SoC portion of the ZYNQ. The
+other one is available on all series 7 platforms and is a softmacro with a AXI
+interface. This binding document describes the bindings for both of them since
+the bindings are very similar.
+
+Required properties:
+	- compatible: Should be one of
+		* "xlnx,zynq-xadc-1.00.a": When using the ZYNQ device
+		  configuration interface to interface to the XADC hardmacro.
+		* "xlnx,axi-xadc-1.00.a": When using the axi-xadc pcore to
+		  interface to the XADC hardmacro.
+	- reg: Address and length of the register set for the device
+	- interrupts: Interrupt for the XADC control interface.
+	- clocks: When using the ZYNQ this must be the ZYNQ PCAP clock,
+	  when using the AXI-XADC pcore this must be the clock that provides the
+	  clock to the AXI bus interface of the core.
+
+Optional properties:
+	- interrupt-parent: phandle to the parent interrupt controller
+	- xlnx,external-mux:
+		* "none": No external multiplexer is used, this is the default
+		  if the property is omitted.
+		* "single": External multiplexer mode is used with one
+		   multiplexer.
+		* "dual": External multiplexer mode is used with two
+		  multiplexers for simultaneous sampling.
+	- xlnx,external-mux-channel: Configures which pair of pins is used to
+	  sample data in external mux mode.
+	  Valid values for single external multiplexer mode are:
+		0: VP/VN
+		1: VAUXP[0]/VAUXN[0]
+		2: VAUXP[1]/VAUXN[1]
+		...
+		16: VAUXP[15]/VAUXN[15]
+	  Valid values for dual external multiplexer mode are:
+		1: VAUXP[0]/VAUXN[0] - VAUXP[8]/VAUXN[8]
+		2: VAUXP[1]/VAUXN[1] - VAUXP[9]/VAUXN[9]
+		...
+		8: VAUXP[7]/VAUXN[7] - VAUXP[15]/VAUXN[15]
+
+	  This property needs to be present if the device is configured for
+	  external multiplexer mode (either single or dual). If the device is
+	  not using external multiplexer mode the property is ignored.
+	- xnlx,channels: List of external channels that are connected to the ADC
+	  Required properties:
+		* #address-cells: Should be 1.
+		* #size-cells: Should be 0.
+
+	  The child nodes of this node represent the external channels which are
+	  connected to the ADC. If the property is no present no external
+	  channels will be assumed to be connected.
+
+	  Each child node represents one channel and has the following
+	  properties:
+		Required properties:
+			* reg: Pair of pins the the channel is connected to.
+				0: VP/VN
+				1: VAUXP[0]/VAUXN[0]
+				2: VAUXP[1]/VAUXN[1]
+				...
+				16: VAUXP[15]/VAUXN[15]
+			  Note each channel number should only be used at most
+			  once.
+		Optional properties:
+			* xlnx,bipolar: If set the channel is used in bipolar
+			  mode.
+
+
+Examples:
+	xadc@f8007100 {
+		compatible = "xlnx,zynq-xadc-1.00.a";
+		reg = <0xf8007100 0x20>;
+		interrupts = <0 7 4>;
+		interrupt-parent = <&gic>;
+		clocks = <&pcap_clk>;
+
+		xlnx,channels {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			channel@0 {
+				reg = <0>;
+			};
+			channel@1 {
+				reg = <1>;
+			};
+			channel@8 {
+				reg = <8>;
+			};
+		};
+	};
+
+	xadc@43200000 {
+		compatible = "xlnx,axi-xadc-1.00.a";
+		reg = <0x43200000 0x1000>;
+		interrupts = <0 53 4>;
+		interrupt-parent = <&gic>;
+		clocks = <&fpga1_clk>;
+
+		xlnx,channels {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			channel@0 {
+				reg = <0>;
+				xlnx,bipolar;
+			};
+		};
+	};
diff --git a/Bindings/iio/proximity/as3935.txt b/Bindings/iio/proximity/as3935.txt
new file mode 100644
index 000000000000..ae23dd8da736
--- /dev/null
+++ b/Bindings/iio/proximity/as3935.txt
@@ -0,0 +1,28 @@
+Austrian Microsystems AS3935 Franklin lightning sensor device driver
+
+Required properties:
+	- compatible: must be "ams,as3935"
+	- reg: SPI chip select number for the device
+	- spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI
+	slave node bindings.
+	- interrupt-parent : should be the phandle for the interrupt controller
+	- interrupts : the sole interrupt generated by the device
+
+	Refer to interrupt-controller/interrupts.txt for generic
+	interrupt client node bindings.
+
+Optional properties:
+	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
+	  value 0 - 120pF. This will require using the calibration data from
+	  the manufacturer.
+
+Example:
+
+as3935@0 {
+	compatible = "ams,as3935";
+	reg = <0>;
+	spi-cpha;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 1>;
+	ams,tuning-capacitor-pf = <80>;
+};
diff --git a/Bindings/iio/st-sensors.txt b/Bindings/iio/st-sensors.txt
new file mode 100644
index 000000000000..a7a0a15913ad
--- /dev/null
+++ b/Bindings/iio/st-sensors.txt
@@ -0,0 +1,54 @@
+STMicroelectronics MEMS sensors
+
+The STMicroelectronics sensor devices are pretty straight-forward I2C or
+SPI devices, all sharing the same device tree descriptions no matter what
+type of sensor it is.
+
+Required properties:
+- compatible: see the list of valid compatible strings below
+- reg: the I2C or SPI address the device will respond to
+
+Optional properties:
+- vdd-supply: an optional regulator that needs to be on to provide VDD
+  power to the sensor.
+- vddio-supply: an optional regulator that needs to be on to provide the
+  VDD IO power to the sensor.
+- st,drdy-int-pin: the pin on the package that will be used to signal
+  "data ready" (valid values: 1 or 2). This property is not configurable
+  on all sensors.
+
+Sensors may also have applicable pin control settings, those use the
+standard bindings from pinctrl/pinctrl-bindings.txt.
+
+Valid compatible strings:
+
+Accelerometers:
+- st,lsm303dlh-accel
+- st,lsm303dlhc-accel
+- st,lis3dh-accel
+- st,lsm330d-accel
+- st,lsm330dl-accel
+- st,lsm330dlc-accel
+- st,lis331dlh-accel
+- st,lsm303dl-accel
+- st,lsm303dlm-accel
+- st,lsm330-accel
+
+Gyroscopes:
+- st,l3g4200d-gyro
+- st,lsm330d-gyro
+- st,lsm330dl-gyro
+- st,lsm330dlc-gyro
+- st,l3gd20-gyro
+- st,l3g4is-gyro
+- st,lsm330-gyro
+
+Magnetometers:
+- st,lsm303dlhc-magn
+- st,lsm303dlm-magn
+- st,lis3mdl-magn
+
+Pressure sensors:
+- st,lps001wp-press
+- st,lps25h-press
+- st,lps331ap-press
diff --git a/Bindings/input/atmel,maxtouch.txt b/Bindings/input/atmel,maxtouch.txt
new file mode 100644
index 000000000000..baef432e8369
--- /dev/null
+++ b/Bindings/input/atmel,maxtouch.txt
@@ -0,0 +1,25 @@
+Atmel maXTouch touchscreen/touchpad
+
+Required properties:
+- compatible:
+    atmel,maxtouch
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touchpad's IRQ output
+    See ../interrupt-controller/interrupts.txt
+
+Optional properties for main touchpad device:
+
+- linux,gpio-keymap: An array of up to 4 entries indicating the Linux
+    keycode generated by each GPIO. Linux keycodes are defined in
+    <dt-bindings/input/input.h>.
+
+Example:
+
+	touch@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpio>;
+		interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+	};
diff --git a/Bindings/input/cap1106.txt b/Bindings/input/cap1106.txt
new file mode 100644
index 000000000000..4b463904cba0
--- /dev/null
+++ b/Bindings/input/cap1106.txt
@@ -0,0 +1,53 @@
+Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor
+
+The node for this driver must be a child of a I2C controller node, as the
+device communication via I2C only.
+
+Required properties:
+
+	compatible:		Must be "microchip,cap1106"
+
+	reg:			The I2C slave address of the device.
+				Only 0x28 is valid.
+
+	interrupts:		Property describing the interrupt line the
+				device's ALERT#/CM_IRQ# pin is connected to.
+				The device only has one interrupt source.
+
+Optional properties:
+
+	autorepeat:		Enables the Linux input system's autorepeat
+				feature on the input device.
+
+	microchip,sensor-gain:	Defines the gain of the sensor circuitry. This
+				effectively controls the sensitivity, as a
+				smaller delta capacitance is required to
+				generate the same delta count values.
+				Valid values are 1, 2, 4, and 8.
+				By default, a gain of 1 is set.
+
+	linux,keycodes:		Specifies an array of numeric keycode values to
+				be used for the channels. If this property is
+				omitted, KEY_A, KEY_B, etc are used as
+				defaults. The array must have exactly six
+				entries.
+
+Example:
+
+i2c_controller {
+	cap1106@28 {
+		compatible = "microchip,cap1106";
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 0>;
+		reg = <0x28>;
+		autorepeat;
+		microchip,sensor-gain = <2>;
+
+		linux,keycodes = <103		/* KEY_UP */
+				  106		/* KEY_RIGHT */
+				  108		/* KEY_DOWN */
+				  105		/* KEY_LEFT */
+				  109		/* KEY_PAGEDOWN */
+				  104>;		/* KEY_PAGEUP */
+	};
+}
diff --git a/Bindings/input/clps711x-keypad.txt b/Bindings/input/clps711x-keypad.txt
new file mode 100644
index 000000000000..e68d2bbc6c07
--- /dev/null
+++ b/Bindings/input/clps711x-keypad.txt
@@ -0,0 +1,27 @@
+* Cirrus Logic CLPS711X matrix keypad device tree bindings
+
+Required Properties:
+- compatible:    Shall contain "cirrus,clps711x-keypad".
+- row-gpios:     List of GPIOs used as row lines.
+- poll-interval: Poll interval time in milliseconds.
+- linux,keymap:  The definition can be found at
+                 bindings/input/matrix-keymap.txt.
+
+Optional Properties:
+- autorepeat:    Enable autorepeat feature.
+
+Example:
+	keypad {
+		compatible = "cirrus,ep7312-keypad", "cirrus,clps711x-keypad";
+		autorepeat;
+		poll-interval = <120>;
+		row-gpios = <&porta 0 0>,
+			    <&porta 1 0>;
+
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_UP)
+			MATRIX_KEY(0, 1, KEY_DOWN)
+			MATRIX_KEY(1, 0, KEY_LEFT)
+			MATRIX_KEY(1, 1, KEY_RIGHT)
+		>;
+	};
diff --git a/Bindings/input/gpio-keys.txt b/Bindings/input/gpio-keys.txt
new file mode 100644
index 000000000000..5c2c02140a62
--- /dev/null
+++ b/Bindings/input/gpio-keys.txt
@@ -0,0 +1,36 @@
+Device-Tree bindings for input/gpio_keys.c keyboard driver
+
+Required properties:
+	- compatible = "gpio-keys";
+
+Optional properties:
+	- autorepeat: Boolean, Enable auto repeat feature of Linux input
+	  subsystem.
+
+Each button (key) is represented as a sub-node of "gpio-keys":
+Subnode properties:
+
+	- gpios: OF device-tree gpio specification.
+	- label: Descriptive name of the key.
+	- linux,code: Keycode to emit.
+
+Optional subnode-properties:
+	- linux,input-type: Specify event type this button/key generates.
+	  If not specified defaults to <1> == EV_KEY.
+	- debounce-interval: Debouncing interval time in milliseconds.
+	  If not specified defaults to 5.
+	- gpio-key,wakeup: Boolean, button can wake-up the system.
+
+Example nodes:
+
+	gpio_keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			autorepeat;
+			button@21 {
+				label = "GPIO Key UP";
+				linux,code = <103>;
+				gpios = <&gpio1 0 1>;
+			};
+			...
diff --git a/Bindings/input/qcom,pm8xxx-keypad.txt b/Bindings/input/qcom,pm8xxx-keypad.txt
new file mode 100644
index 000000000000..7d8cb92831d7
--- /dev/null
+++ b/Bindings/input/qcom,pm8xxx-keypad.txt
@@ -0,0 +1,89 @@
+Qualcomm PM8xxx PMIC Keypad
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058-keypad"
+		    "qcom,pm8921-keypad"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: address of keypad control register
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first interrupt specifies the key sense interrupt
+		    and the second interrupt specifies the key stuck interrupt.
+		    The format of the specifier is defined by the binding
+		    document describing the node's interrupt parent.
+
+- linux,keymap:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the linux keymap. More information can be found in
+		    input/matrix-keymap.txt.
+
+- linux,keypad-no-autorepeat:
+	Usage: optional
+	Value type: <bool>
+	Definition: don't enable autorepeat feature.
+
+- linux,keypad-wakeup:
+	Usage: optional
+	Value type: <bool>
+	Definition: use any event on keypad as wakeup event.
+
+- keypad,num-rows:
+	Usage: required
+	Value type: <u32>
+	Definition: number of rows in the keymap. More information can be found
+		    in input/matrix-keymap.txt.
+
+- keypad,num-columns:
+	Usage: required
+	Value type: <u32>
+	Definition: number of columns in the keymap. More information can be
+		    found in input/matrix-keymap.txt.
+
+- debounce:
+	Usage: optional
+	Value type: <u32>
+	Definition: time in microseconds that key must be pressed or release
+		    for key sense interrupt to trigger.
+
+- scan-delay:
+	Usage: optional
+	Value type: <u32>
+	Definition: time in microseconds to pause between successive scans
+		    of the matrix array.
+
+- row-hold:
+	Usage: optional
+	Value type: <u32>
+	Definition: time in nanoseconds to pause between scans of each row in
+		    the matrix array.
+
+EXAMPLE
+
+	keypad@148 {
+		compatible = "qcom,pm8921-keypad";
+		reg = <0x148>;
+		interrupt-parent = <&pmicintc>;
+		interrupts = <74 1>, <75 1>;
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+			MATRIX_KEY(0, 3, KEY_CAMERA)
+			>;
+		keypad,num-rows = <1>;
+		keypad,num-columns = <5>;
+		debounce = <15>;
+		scan-delay = <32>;
+		row-hold = <91500>;
+	};
diff --git a/Bindings/input/qcom,pm8xxx-pwrkey.txt b/Bindings/input/qcom,pm8xxx-pwrkey.txt
new file mode 100644
index 000000000000..588536cc96ed
--- /dev/null
+++ b/Bindings/input/qcom,pm8xxx-pwrkey.txt
@@ -0,0 +1,46 @@
+Qualcomm PM8xxx PMIC Power Key
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058-pwrkey"
+		    "qcom,pm8921-pwrkey"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: address of power key control register
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first interrupt specifies the key release interrupt
+		    and the second interrupt specifies the key press interrupt.
+		    The format of the specifier is defined by the binding
+		    document describing the node's interrupt parent.
+
+- debounce:
+	Usage: optional
+	Value type: <u32>
+	Definition: time in microseconds that key must be pressed or release
+		    for state change interrupt to trigger.
+
+- pull-up:
+	Usage: optional
+	Value type: <empty>
+	Definition: presence of this property indicates that the KPDPWR_N pin
+		    should be configured for pull up.
+
+EXAMPLE
+
+	pwrkey@1c {
+		compatible = "qcom,pm8921-pwrkey";
+		reg = <0x1c>;
+		interrupt-parent = <&pmicintc>;
+		interrupts = <50 1>, <51 1>;
+		debounce = <15625>;
+		pull-up;
+	};
diff --git a/Bindings/input/qcom,pm8xxx-vib.txt b/Bindings/input/qcom,pm8xxx-vib.txt
new file mode 100644
index 000000000000..4ed467b1e402
--- /dev/null
+++ b/Bindings/input/qcom,pm8xxx-vib.txt
@@ -0,0 +1,22 @@
+Qualcomm PM8xxx PMIC Vibrator
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058-vib"
+		    "qcom,pm8921-vib"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: address of vibration control register
+
+EXAMPLE
+
+	vibrator@4a {
+		compatible = "qcom,pm8058-vib";
+		reg = <0x4a>;
+	};
diff --git a/Bindings/input/st-keyscan.txt b/Bindings/input/st-keyscan.txt
new file mode 100644
index 000000000000..51eb428e5c85
--- /dev/null
+++ b/Bindings/input/st-keyscan.txt
@@ -0,0 +1,60 @@
+* ST Keyscan controller Device Tree bindings
+
+The ST keyscan controller Device Tree binding is based on the
+matrix-keymap.
+
+Required properties:
+- compatible: "st,sti-keyscan"
+
+- reg: Register base address and size of st-keyscan controller.
+
+- interrupts: Interrupt number for the st-keyscan controller.
+
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+
+- pinctrl: Should specify pin control groups used for this controller.
+  See ../pinctrl/pinctrl-bindings.txt for details.
+
+- linux,keymap: The keymap for keys as described in the binding document
+  devicetree/bindings/input/matrix-keymap.txt.
+
+- keypad,num-rows: Number of row lines connected to the keypad controller.
+
+- keypad,num-columns: Number of column lines connected to the keypad
+  controller.
+
+Optional property:
+- st,debounce_us: Debouncing interval time in microseconds
+
+Example:
+
+keyscan: keyscan@fe4b0000 {
+	compatible = "st,sti-keyscan";
+	reg = <0xfe4b0000 0x2000>;
+	interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+	clocks	= <&CLK_SYSIN>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_keyscan>;
+
+	keypad,num-rows = <4>;
+	keypad,num-columns = <4>;
+	st,debounce_us = <5000>;
+
+	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
+			 MATRIX_KEY(0x00, 0x01, KEY_F9)
+			 MATRIX_KEY(0x00, 0x02, KEY_F5)
+			 MATRIX_KEY(0x00, 0x03, KEY_F1)
+			 MATRIX_KEY(0x01, 0x00, KEY_F14)
+			 MATRIX_KEY(0x01, 0x01, KEY_F10)
+			 MATRIX_KEY(0x01, 0x02, KEY_F6)
+			 MATRIX_KEY(0x01, 0x03, KEY_F2)
+			 MATRIX_KEY(0x02, 0x00, KEY_F15)
+			 MATRIX_KEY(0x02, 0x01, KEY_F11)
+			 MATRIX_KEY(0x02, 0x02, KEY_F7)
+			 MATRIX_KEY(0x02, 0x03, KEY_F3)
+			 MATRIX_KEY(0x03, 0x00, KEY_F16)
+			 MATRIX_KEY(0x03, 0x01, KEY_F12)
+			 MATRIX_KEY(0x03, 0x02, KEY_F8)
+			 MATRIX_KEY(0x03, 0x03, KEY_F4) >;
+	};
diff --git a/Bindings/input/touchscreen/edt-ft5x06.txt b/Bindings/input/touchscreen/edt-ft5x06.txt
new file mode 100644
index 000000000000..76db96704a60
--- /dev/null
+++ b/Bindings/input/touchscreen/edt-ft5x06.txt
@@ -0,0 +1,55 @@
+FocalTech EDT-FT5x06 Polytouch driver
+=====================================
+
+There are 3 variants of the chip for various touch panel sizes
+FT5206GE1  2.8" .. 3.8"
+FT5306DE4  4.3" .. 7"
+FT5406EE8  7"   .. 8.9"
+
+The software interface is identical for all those chips, so that
+currently there is no need for the driver to distinguish between the
+different chips. Nevertheless distinct compatible strings are used so
+that a distinction can be added if necessary without changing the DT
+bindings.
+
+
+Required properties:
+ - compatible:  "edt,edt-ft5206"
+           or:  "edt,edt-ft5306"
+           or:  "edt,edt-ft5406"
+
+ - reg:         I2C slave address of the chip (0x38)
+ - interrupt-parent: a phandle pointing to the interrupt controller
+                     serving the interrupt for this chip
+ - interrupts:       interrupt specification for the touchdetect
+                     interrupt
+
+Optional properties:
+ - reset-gpios: GPIO specification for the RESET input
+ - wake-gpios:  GPIO specification for the WAKE input
+
+ - pinctrl-names: should be "default"
+ - pinctrl-0:   a phandle pointing to the pin settings for the
+                control gpios
+
+ - threshold:   allows setting the "click"-threshold in the range
+                from 20 to 80.
+
+ - gain:        allows setting the sensitivity in the range from 0 to
+                31. Note that lower values indicate higher
+                sensitivity.
+
+ - offset:      allows setting the edge compensation in the range from
+                0 to 31.
+
+Example:
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5x06_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 0>;
+		reset-gpios = <&gpio2 6 1>;
+		wake-gpios = <&gpio4 9 0>;
+	};
diff --git a/Bindings/input/touchscreen/pixcir_i2c_ts.txt b/Bindings/input/touchscreen/pixcir_i2c_ts.txt
new file mode 100644
index 000000000000..6e551090f465
--- /dev/null
+++ b/Bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -0,0 +1,26 @@
+* Pixcir I2C touchscreen controllers
+
+Required properties:
+- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- attb-gpio: GPIO connected to the ATTB line of the chip
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		pixcir_ts@5c {
+			compatible = "pixcir,pixcir_ts";
+			reg = <0x5c>;
+			interrupts = <2 0>;
+			attb-gpio = <&gpf 2 0 2>;
+			touchscreen-size-x = <800>;
+			touchscreen-size-y = <600>;
+		};
+
+		/* ... */
+	};
diff --git a/Bindings/input/touchscreen/sun4i.txt b/Bindings/input/touchscreen/sun4i.txt
new file mode 100644
index 000000000000..aef57791f40b
--- /dev/null
+++ b/Bindings/input/touchscreen/sun4i.txt
@@ -0,0 +1,20 @@
+sun4i resistive touchscreen controller
+--------------------------------------
+
+Required properties:
+ - compatible: "allwinner,sun4i-a10-ts"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+
+Optional properties:
+ - allwinner,ts-attached: boolean indicating that an actual touchscreen is
+			  attached to the controller
+
+Example:
+
+	rtp: rtp@01c25000 {
+		compatible = "allwinner,sun4i-a10-ts";
+		reg = <0x01c25000 0x100>;
+		interrupts = <29>;
+		allwinner,ts-attached;
+	};
diff --git a/Bindings/input/touchscreen/touchscreen.txt b/Bindings/input/touchscreen/touchscreen.txt
new file mode 100644
index 000000000000..d8e06163c54e
--- /dev/null
+++ b/Bindings/input/touchscreen/touchscreen.txt
@@ -0,0 +1,27 @@
+General Touchscreen Properties:
+
+Optional properties for Touchscreens:
+ - touchscreen-size-x		: horizontal resolution of touchscreen
+				  (in pixels)
+ - touchscreen-size-y		: vertical resolution of touchscreen
+				  (in pixels)
+ - touchscreen-max-pressure	: maximum reported pressure (arbitrary range
+				  dependent on the controller)
+ - touchscreen-fuzz-x		: horizontal noise value of the absolute input
+				  device (in pixels)
+ - touchscreen-fuzz-y		: vertical noise value of the absolute input
+				  device (in pixels)
+ - touchscreen-fuzz-pressure	: pressure noise value of the absolute input
+				  device (arbitrary range dependent on the
+				  controller)
+ - touchscreen-inverted-x	: X axis is inverted (boolean)
+ - touchscreen-inverted-y	: Y axis is inverted (boolean)
+
+Deprecated properties for Touchscreens:
+ - x-size			: deprecated name for touchscreen-size-x
+ - y-size			: deprecated name for touchscreen-size-y
+ - moving-threshold		: deprecated name for a combination of
+				  touchscreen-fuzz-x and touchscreen-fuzz-y
+ - contact-threshold		: deprecated name for touchscreen-fuzz-pressure
+ - x-invert			: deprecated name for touchscreen-inverted-x
+ - y-invert			: deprecated name for touchscreen-inverted-y
diff --git a/Bindings/input/touchscreen/tsc2005.txt b/Bindings/input/touchscreen/tsc2005.txt
new file mode 100644
index 000000000000..4b641c7bf1c2
--- /dev/null
+++ b/Bindings/input/touchscreen/tsc2005.txt
@@ -0,0 +1,42 @@
+* Texas Instruments tsc2005 touchscreen controller
+
+Required properties:
+ - compatible		      : "ti,tsc2005"
+ - reg			      : SPI device address
+ - spi-max-frequency	      : Maximal SPI speed
+ - interrupts		      : IRQ specifier
+ - reset-gpios		      : GPIO specifier
+ - vio-supply                 : Regulator specifier
+
+Optional properties:
+ - ti,x-plate-ohms	      : integer, resistance of the touchscreen's X plates
+				in ohm (defaults to 280)
+ - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
+				the configured time (in milli seconds), the driver
+				will reset it. This is disabled by default.
+ - properties defined in touchscreen.txt
+
+Example:
+
+&mcspi1 {
+	tsc2005@0 {
+		compatible = "ti,tsc2005";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+
+		vio-supply = <&vio>;
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-max-x = <4096>;
+		touchscreen-max-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+}
diff --git a/Bindings/input/touchscreen/zforce_ts.txt b/Bindings/input/touchscreen/zforce_ts.txt
new file mode 100644
index 000000000000..80c37df940a7
--- /dev/null
+++ b/Bindings/input/touchscreen/zforce_ts.txt
@@ -0,0 +1,34 @@
+* Neonode infrared touchscreen controller
+
+Required properties:
+- compatible: must be "neonode,zforce"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- gpios: gpios the chip is connected to
+  first one is the interrupt gpio and second one the reset gpio
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Optional properties:
+- vdd-supply: Regulator controlling the controller supply
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		zforce_ts@50 {
+			compatible = "neonode,zforce";
+			reg = <0x50>;
+			interrupts = <2 0>;
+			vdd-supply = <&reg_zforce_vdd>;
+
+			gpios = <&gpio5 6 0>, /* INT */
+				<&gpio5 9 0>; /* RST */
+
+			x-size = <800>;
+			y-size = <600>;
+		};
+
+		/* ... */
+	};
diff --git a/Bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt b/Bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt
new file mode 100644
index 000000000000..d1c5cdabc3e0
--- /dev/null
+++ b/Bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt
@@ -0,0 +1,27 @@
+Allwinner Sunxi NMI Controller
+==============================
+
+Required properties:
+
+- compatible : should be "allwinner,sun7i-a20-sc-nmi" or
+  "allwinner,sun6i-a31-sc-nmi"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 2. The first cell is the IRQ number, the
+  second cell the trigger type as defined in interrupt.txt in this directory.
+- interrupt-parent: Specifies the parent interrupt controller.
+- interrupts: Specifies the interrupt line (NMI) which is handled by
+  the interrupt controller in the parent controller's notation. This value
+  shall be the NMI.
+
+Example:
+
+sc-nmi-intc@01c00030 {
+	compatible = "allwinner,sun7i-a20-sc-nmi";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	reg = <0x01c00030 0x0c>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 0 4>;
+};
diff --git a/Bindings/interrupt-controller/atmel,aic.txt b/Bindings/interrupt-controller/atmel,aic.txt
new file mode 100644
index 000000000000..2742e9cfd6b1
--- /dev/null
+++ b/Bindings/interrupt-controller/atmel,aic.txt
@@ -0,0 +1,42 @@
+* Advanced Interrupt Controller (AIC)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-aic"
+  <chip> can be "at91rm9200" or "sama5d3"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- interrupt-parent: For single AIC system, it is an empty property.
+- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
+  The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
+  The second cell is used to specify flags:
+    bits[3:0] trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
+      Valid combinations are 1, 2, 3, 4, 8.
+      Default flag for internal sources should be set to 4 (active high).
+  The third cell is used to specify the irq priority from 0 (lowest) to 7
+  (highest).
+- reg: Should contain AIC registers location and length
+- atmel,external-irqs: u32 array of external irqs.
+
+Examples:
+	/*
+	 * AIC
+	 */
+	aic: interrupt-controller@fffff000 {
+		compatible = "atmel,at91rm9200-aic";
+		interrupt-controller;
+		interrupt-parent;
+		#interrupt-cells = <3>;
+		reg = <0xfffff000 0x200>;
+	};
+
+	/*
+	 * An interrupt generating device that is wired to an AIC.
+	 */
+	dma: dma-controller@ffffec00 {
+		compatible = "atmel,at91sam9g45-dma";
+		reg = <0xffffec00 0x200>;
+		interrupts = <21 4 5>;
+	};
diff --git a/Bindings/interrupt-controller/brcm,l2-intc.txt b/Bindings/interrupt-controller/brcm,l2-intc.txt
new file mode 100644
index 000000000000..448273a30a11
--- /dev/null
+++ b/Bindings/interrupt-controller/brcm,l2-intc.txt
@@ -0,0 +1,29 @@
+Broadcom Generic Level 2 Interrupt Controller
+
+Required properties:
+
+- compatible: should be "brcm,l2-intc"
+- reg: specifies the base physical address and size of the registers
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an
+  interrupt source. Should be 1.
+- interrupt-parent: specifies the phandle to the parent interrupt controller
+  this controller is cacaded from
+- interrupts: specifies the interrupt line in the interrupt-parent irq space
+  to be used for cascading
+
+Optional properties:
+
+- brcm,irq-can-wake: If present, this means the L2 controller can be used as a
+  wakeup source for system suspend/resume.
+
+Example:
+
+hif_intr2_intc: interrupt-controller@f0441000 {
+	compatible = "brcm,l2-intc";
+	reg = <0xf0441000 0x30>;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+	interrupt-parent = <&intc>;
+	interrupts = <0x0 0x20 0x0>;
+};
diff --git a/Bindings/interrupt-controller/cirrus,clps711x-intc.txt b/Bindings/interrupt-controller/cirrus,clps711x-intc.txt
new file mode 100644
index 000000000000..759339c34e4f
--- /dev/null
+++ b/Bindings/interrupt-controller/cirrus,clps711x-intc.txt
@@ -0,0 +1,41 @@
+Cirrus Logic CLPS711X Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "cirrus,clps711x-intc".
+- reg: Specifies base physical address of the registers set.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+ID	Name	Description
+---------------------------
+1:	BLINT	Battery low (FIQ)
+3:	MCINT	Media changed (FIQ)
+4:	CSINT	CODEC sound
+5:	EINT1	External 1
+6:	EINT2	External 2
+7:	EINT3	External 3
+8:	TC1OI	TC1 under flow
+9:	TC2OI	TC2 under flow
+10:	RTCMI	RTC compare match
+11:	TINT	64Hz tick
+12:	UTXINT1	UART1 transmit FIFO half empty
+13:	URXINT1	UART1 receive FIFO half full
+14:	UMSINT	UART1 modem status changed
+15:	SSEOTI	SSI1 end of transfer
+16:	KBDINT	Keyboard
+17:	SS2RX	SSI2 receive FIFO half or greater full
+18:	SS2TX	SSI2 transmit FIFO less than half empty
+28:	UTXINT2	UART2 transmit FIFO half empty
+29:	URXINT2	UART2 receive FIFO half full
+32:	DAIINT	DAI interface (FIQ)
+
+Example:
+	intc: interrupt-controller {
+		compatible = "cirrus,clps711x-intc";
+		reg = <0x80000000 0x4000>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
diff --git a/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt b/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
new file mode 100644
index 000000000000..5fc03134a999
--- /dev/null
+++ b/Bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
@@ -0,0 +1,38 @@
+Marvell Armada 370, 375, 38x, XP Interrupt Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible: Should be "marvell,mpic"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- msi-controller: Identifies the node as an PCI Message Signaled
+  Interrupt controller.
+- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
+  The cell is the IRQ number
+
+- reg: Should contain PMIC registers location and length. First pair
+  for the main interrupt registers, second pair for the per-CPU
+  interrupt registers. For this last pair, to be compliant with SMP
+  support, the "virtual" must be use (For the record, these registers
+  automatically map to the interrupt controller registers of the
+  current CPU)
+
+Optional properties:
+
+- interrupts: If defined, then it indicates that this MPIC is
+  connected as a slave to another interrupt controller. This is
+  typically the case on Armada 375 and Armada 38x, where the MPIC is
+  connected as a slave to the Cortex-A9 GIC. The provided interrupt
+  indicate to which GIC interrupt the MPIC output is connected.
+
+Example:
+
+        mpic: interrupt-controller@d0020000 {
+              compatible = "marvell,mpic";
+              #interrupt-cells = <1>;
+              #address-cells = <1>;
+              #size-cells = <1>;
+              interrupt-controller;
+              msi-controller;
+              reg = <0xd0020a00 0x1d0>,
+                    <0xd0021070 0x58>;
+        };
diff --git a/Bindings/interrupt-controller/opencores,or1k-pic.txt b/Bindings/interrupt-controller/opencores,or1k-pic.txt
new file mode 100644
index 000000000000..55c04faa3f3f
--- /dev/null
+++ b/Bindings/interrupt-controller/opencores,or1k-pic.txt
@@ -0,0 +1,23 @@
+OpenRISC 1000 Programmable Interrupt Controller
+
+Required properties:
+
+- compatible : should be "opencores,or1k-pic-level" for variants with
+  level triggered interrupt lines, "opencores,or1k-pic-edge" for variants with
+  edge triggered interrupt lines or "opencores,or1200-pic" for machines
+  with the non-spec compliant or1200 type implementation.
+
+  "opencores,or1k-pic" is also provided as an alias to "opencores,or1200-pic",
+  but this is only for backwards compatibility.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+Example:
+
+intc: interrupt-controller {
+	compatible = "opencores,or1k-pic-level";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/Bindings/iommu/iommu.txt b/Bindings/iommu/iommu.txt
new file mode 100644
index 000000000000..5a8b4624defc
--- /dev/null
+++ b/Bindings/iommu/iommu.txt
@@ -0,0 +1,182 @@
+This document describes the generic device tree binding for IOMMUs and their
+master(s).
+
+
+IOMMU device node:
+==================
+
+An IOMMU can provide the following services:
+
+* Remap address space to allow devices to access physical memory ranges that
+  they otherwise wouldn't be capable of accessing.
+
+  Example: 32-bit DMA to 64-bit physical addresses
+
+* Implement scatter-gather at page level granularity so that the device does
+  not have to.
+
+* Provide system protection against "rogue" DMA by forcing all accesses to go
+  through the IOMMU and faulting when encountering accesses to unmapped
+  address regions.
+
+* Provide address space isolation between multiple contexts.
+
+  Example: Virtualization
+
+Device nodes compatible with this binding represent hardware with some of the
+above capabilities.
+
+IOMMUs can be single-master or multiple-master. Single-master IOMMU devices
+typically have a fixed association to the master device, whereas multiple-
+master IOMMU devices can translate accesses from more than one master.
+
+The device tree node of the IOMMU device's parent bus must contain a valid
+"dma-ranges" property that describes how the physical address space of the
+IOMMU maps to memory. An empty "dma-ranges" property means that there is a
+1:1 mapping from IOMMU to memory.
+
+Required properties:
+--------------------
+- #iommu-cells: The number of cells in an IOMMU specifier needed to encode an
+  address.
+
+The meaning of the IOMMU specifier is defined by the device tree binding of
+the specific IOMMU. Below are a few examples of typical use-cases:
+
+- #iommu-cells = <0>: Single master IOMMU devices are not configurable and
+  therefore no additional information needs to be encoded in the specifier.
+  This may also apply to multiple master IOMMU devices that do not allow the
+  association of masters to be configured. Note that an IOMMU can by design
+  be multi-master yet only expose a single master in a given configuration.
+  In such cases the number of cells will usually be 1 as in the next case.
+- #iommu-cells = <1>: Multiple master IOMMU devices may need to be configured
+  in order to enable translation for a given master. In such cases the single
+  address cell corresponds to the master device's ID. In some cases more than
+  one cell can be required to represent a single master ID.
+- #iommu-cells = <4>: Some IOMMU devices allow the DMA window for masters to
+  be configured. The first cell of the address in this may contain the master
+  device's ID for example, while the second cell could contain the start of
+  the DMA window for the given device. The length of the DMA window is given
+  by the third and fourth cells.
+
+Note that these are merely examples and real-world use-cases may use different
+definitions to represent their individual needs. Always refer to the specific
+IOMMU binding for the exact meaning of the cells that make up the specifier.
+
+
+IOMMU master node:
+==================
+
+Devices that access memory through an IOMMU are called masters. A device can
+have multiple master interfaces (to one or more IOMMU devices).
+
+Required properties:
+--------------------
+- iommus: A list of phandle and IOMMU specifier pairs that describe the IOMMU
+  master interfaces of the device. One entry in the list describes one master
+  interface of the device.
+
+When an "iommus" property is specified in a device tree node, the IOMMU will
+be used for address translation. If a "dma-ranges" property exists in the
+device's parent node it will be ignored. An exception to this rule is if the
+referenced IOMMU is disabled, in which case the "dma-ranges" property of the
+parent shall take effect. Note that merely disabling a device tree node does
+not guarantee that the IOMMU is really disabled since the hardware may not
+have a means to turn off translation. But it is invalid in such cases to
+disable the IOMMU's device tree node in the first place because it would
+prevent any driver from properly setting up the translations.
+
+
+Notes:
+======
+
+One possible extension to the above is to use an "iommus" property along with
+a "dma-ranges" property in a bus device node (such as PCI host bridges). This
+can be useful to describe how children on the bus relate to the IOMMU if they
+are not explicitly listed in the device tree (e.g. PCI devices). However, the
+requirements of that use-case haven't been fully determined yet. Implementing
+this is therefore not recommended without further discussion and extension of
+this binding.
+
+
+Examples:
+=========
+
+Single-master IOMMU:
+--------------------
+
+	iommu {
+		#iommu-cells = <0>;
+	};
+
+	master {
+		iommus = <&{/iommu}>;
+	};
+
+Multiple-master IOMMU with fixed associations:
+----------------------------------------------
+
+	/* multiple-master IOMMU */
+	iommu {
+		/*
+		 * Masters are statically associated with this IOMMU and share
+		 * the same address translations because the IOMMU does not
+		 * have sufficient information to distinguish between masters.
+		 *
+		 * Consequently address translation is always on or off for
+		 * all masters at any given point in time.
+		 */
+		#iommu-cells = <0>;
+	};
+
+	/* static association with IOMMU */
+	master@1 {
+		reg = <1>;
+		iommus = <&{/iommu}>;
+	};
+
+	/* static association with IOMMU */
+	master@2 {
+		reg = <2>;
+		iommus = <&{/iommu}>;
+	};
+
+Multiple-master IOMMU:
+----------------------
+
+	iommu {
+		/* the specifier represents the ID of the master */
+		#iommu-cells = <1>;
+	};
+
+	master@1 {
+		/* device has master ID 42 in the IOMMU */
+		iommus = <&{/iommu} 42>;
+	};
+
+	master@2 {
+		/* device has master IDs 23 and 24 in the IOMMU */
+		iommus = <&{/iommu} 23>, <&{/iommu} 24>;
+	};
+
+Multiple-master IOMMU with configurable DMA window:
+---------------------------------------------------
+
+	/ {
+		iommu {
+			/*
+			 * One cell for the master ID and one cell for the
+			 * address of the DMA window. The length of the DMA
+			 * window is encoded in two cells.
+			 *
+			 * The DMA window is the range addressable by the
+			 * master (i.e. the I/O virtual address space).
+			 */
+			#iommu-cells = <4>;
+		};
+
+		master {
+			/* master ID 42, 4 GiB DMA window starting at 0 */
+			iommus = <&{/iommu}  42  0  0x1 0x0>;
+		};
+	};
diff --git a/Bindings/iommu/samsung,sysmmu.txt b/Bindings/iommu/samsung,sysmmu.txt
new file mode 100644
index 000000000000..6fa4c737af23
--- /dev/null
+++ b/Bindings/iommu/samsung,sysmmu.txt
@@ -0,0 +1,70 @@
+Samsung Exynos IOMMU H/W, System MMU (System Memory Management Unit)
+
+Samsung's Exynos architecture contains System MMUs that enables scattered
+physical memory chunks visible as a contiguous region to DMA-capable peripheral
+devices like MFC, FIMC, FIMD, GScaler, FIMC-IS and so forth.
+
+System MMU is an IOMMU and supports identical translation table format to
+ARMv7 translation tables with minimum set of page properties including access
+permissions, shareability and security protection. In addition, System MMU has
+another capabilities like L2 TLB or block-fetch buffers to minimize translation
+latency.
+
+System MMUs are in many to one relation with peripheral devices, i.e. single
+peripheral device might have multiple System MMUs (usually one for each bus
+master), but one System MMU can handle transactions from only one peripheral
+device. The relation between a System MMU and the peripheral device needs to be
+defined in device node of the peripheral device.
+
+MFC in all Exynos SoCs and FIMD, M2M Scalers and G2D in Exynos5420 has 2 System
+MMUs.
+* MFC has one System MMU on its left and right bus.
+* FIMD in Exynos5420 has one System MMU for window 0 and 4, the other system MMU
+  for window 1, 2 and 3.
+* M2M Scalers and G2D in Exynos5420 has one System MMU on the read channel and
+  the other System MMU on the write channel.
+The drivers must consider how to handle those System MMUs. One of the idea is
+to implement child devices or sub-devices which are the client devices of the
+System MMU.
+
+Note:
+The current DT binding for the Exynos System MMU is incomplete.
+The following properties can be removed or changed, if found incompatible with
+the "Generic IOMMU Binding" support for attaching devices to the IOMMU.
+
+Required properties:
+- compatible: Should be "samsung,exynos-sysmmu"
+- reg: A tuple of base address and size of System MMU registers.
+- interrupt-parent: The phandle of the interrupt controller of System MMU
+- interrupts: An interrupt specifier for interrupt signal of System MMU,
+	      according to the format defined by a particular interrupt
+	      controller.
+- clock-names: Should be "sysmmu" if the System MMU is needed to gate its clock.
+	       Optional "master" if the clock to the System MMU is gated by
+	       another gate clock other than "sysmmu".
+	       Exynos4 SoCs, there needs no "master" clock.
+	       Exynos5 SoCs, some System MMUs must have "master" clocks.
+- clocks: Required if the System MMU is needed to gate its clock.
+- samsung,power-domain: Required if the System MMU is needed to gate its power.
+	  Please refer to the following document:
+	  Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+
+Examples:
+	gsc_0: gsc@13e00000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e00000 0x1000>;
+		interrupts = <0 85 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock CLK_GSCL0>;
+		clock-names = "gscl";
+	};
+
+	sysmmu_gsc0: sysmmu@13E80000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E80000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+		samsung,power-domain = <&pd_gsc>;
+	};
diff --git a/Bindings/iommu/ti,omap-iommu.txt b/Bindings/iommu/ti,omap-iommu.txt
new file mode 100644
index 000000000000..42531dc387aa
--- /dev/null
+++ b/Bindings/iommu/ti,omap-iommu.txt
@@ -0,0 +1,26 @@
+OMAP2+ IOMMU
+
+Required properties:
+- compatible : Should be one of,
+		"ti,omap2-iommu" for OMAP2/OMAP3 IOMMU instances
+		"ti,omap4-iommu" for OMAP4/OMAP5 IOMMU instances
+		"ti,dra7-iommu" for DRA7xx IOMMU instances
+- ti,hwmods  : Name of the hwmod associated with the IOMMU instance
+- reg        : Address space for the configuration registers
+- interrupts : Interrupt specifier for the IOMMU instance
+
+Optional properties:
+- ti,#tlb-entries : Number of entries in the translation look-aside buffer.
+                    Should be either 8 or 32 (default: 32)
+- ti,iommu-bus-err-back : Indicates the IOMMU instance supports throwing
+		          back a bus error response on MMU faults.
+
+Example:
+	/* OMAP3 ISP MMU */
+	mmu_isp: mmu@480bd400 {
+		compatible = "ti,omap2-iommu";
+		reg = <0x480bd400 0x80>;
+		interrupts = <24>;
+		ti,hwmods = "mmu_isp";
+		ti,#tlb-entries = <8>;
+	};
diff --git a/Bindings/media/atmel-isi.txt b/Bindings/media/atmel-isi.txt
new file mode 100644
index 000000000000..17e71b7b44c6
--- /dev/null
+++ b/Bindings/media/atmel-isi.txt
@@ -0,0 +1,51 @@
+Atmel Image Sensor Interface (ISI) SoC Camera Subsystem
+----------------------------------------------
+
+Required properties:
+- compatible: must be "atmel,at91sam9g45-isi"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the ISI;
+- clocks: list of clock specifiers, corresponding to entries in
+          the clock-names property;
+- clock-names: must contain "isi_clk", which is the isi peripherial clock.
+
+ISI supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+	isi: isi@f0034000 {
+		compatible = "atmel,at91sam9g45-isi";
+		reg = <0xf0034000 0x4000>;
+		interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+
+		clocks = <&isi_clk>;
+		clock-names = "isi_clk";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_isi>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			isi_0: endpoint {
+				remote-endpoint = <&ov2640_0>;
+				bus-width = <8>;
+			};
+		};
+	};
+
+	i2c1: i2c@f0018000 {
+		ov2640: camera@0x30 {
+			compatible = "omnivision,ov2640";
+			reg = <0x30>;
+
+			port {
+				ov2640_0: endpoint {
+					remote-endpoint = <&isi_0>;
+					bus-width = <8>;
+				};
+			};
+		};
+	};
diff --git a/Bindings/media/i2c/adv7604.txt b/Bindings/media/i2c/adv7604.txt
new file mode 100644
index 000000000000..c27cede3bd68
--- /dev/null
+++ b/Bindings/media/i2c/adv7604.txt
@@ -0,0 +1,70 @@
+* Analog Devices ADV7604/11 video decoder with HDMI receiver
+
+The ADV7604 and ADV7611 are multiformat video decoders with an integrated HDMI
+receiver. The ADV7604 has four multiplexed HDMI inputs and one analog input,
+and the ADV7611 has one HDMI input and no analog input.
+
+These device tree bindings support the ADV7611 only at the moment.
+
+Required Properties:
+
+  - compatible: Must contain one of the following
+    - "adi,adv7611" for the ADV7611
+
+  - reg: I2C slave address
+
+  - hpd-gpios: References to the GPIOs that control the HDMI hot-plug
+    detection pins, one per HDMI input. The active flag indicates the GPIO
+    level that enables hot-plug detection.
+
+The device node must contain one 'port' child node per device input and output
+port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
+are numbered as follows.
+
+  Port			ADV7611
+------------------------------------------------------------
+  HDMI			0
+  Digital output	1
+
+The digital output port node must contain at least one endpoint.
+
+Optional Properties:
+
+  - reset-gpios: Reference to the GPIO connected to the device's reset pin.
+
+Optional Endpoint Properties:
+
+  The following three properties are defined in video-interfaces.txt and are
+  valid for source endpoints only.
+
+  - hsync-active: Horizontal synchronization polarity. Defaults to active low.
+  - vsync-active: Vertical synchronization polarity. Defaults to active low.
+  - pclk-sample: Pixel clock polarity. Defaults to output on the falling edge.
+
+  If none of hsync-active, vsync-active and pclk-sample is specified the
+  endpoint will use embedded BT.656 synchronization.
+
+
+Example:
+
+	hdmi_receiver@4c {
+		compatible = "adi,adv7611";
+		reg = <0x4c>;
+
+		reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
+		hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+		port@1 {
+			reg = <1>;
+			hdmi_in: endpoint {
+				remote-endpoint = <&ccdc_in>;
+			};
+		};
+	};
diff --git a/Bindings/media/i2c/mt9m111.txt b/Bindings/media/i2c/mt9m111.txt
new file mode 100644
index 000000000000..ed5a334b1e57
--- /dev/null
+++ b/Bindings/media/i2c/mt9m111.txt
@@ -0,0 +1,28 @@
+Micron 1.3Mp CMOS Digital Image Sensor
+
+The Micron MT9M111 is a CMOS active pixel digital image sensor with an active
+array size of 1280H x 1024V. It is programmable through a simple two-wire serial
+interface.
+
+Required Properties:
+- compatible: value should be "micron,mt9m111"
+
+For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+	i2c_master {
+		mt9m111@5d {
+			compatible = "micron,mt9m111";
+			reg = <0x5d>;
+
+			remote = <&pxa_camera>;
+			port {
+				mt9m111_1: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&pxa_camera>;
+				};
+			};
+		};
+	};
diff --git a/Bindings/media/img-ir-rev1.txt b/Bindings/media/img-ir-rev1.txt
new file mode 100644
index 000000000000..5434ce61b925
--- /dev/null
+++ b/Bindings/media/img-ir-rev1.txt
@@ -0,0 +1,34 @@
+* ImgTec Infrared (IR) decoder version 1
+
+This binding is for Imagination Technologies' Infrared decoder block,
+specifically major revision 1.
+
+Required properties:
+- compatible:		Should be "img,ir-rev1"
+- reg:			Physical base address of the controller and length of
+			memory mapped region.
+- interrupts:		The interrupt specifier to the cpu.
+
+Optional properties:
+- clocks:		List of clock specifiers as described in standard
+			clock bindings.
+			Up to 3 clocks may be specified in the following order:
+			1st:	Core clock (defaults to 32.768KHz if omitted).
+			2nd:	System side (fast) clock.
+			3rd:	Power modulation clock.
+- clock-names:		List of clock names corresponding to the clocks
+			specified in the clocks property.
+			Accepted clock names are:
+			"core":	Core clock.
+			"sys":	System clock.
+			"mod":	Power modulation clock.
+
+Example:
+
+	ir@02006200 {
+		compatible = "img,ir-rev1";
+		reg = <0x02006200 0x100>;
+		interrupts = <29 4>;
+		clocks = <&clk_32khz>;
+		clock-names =  "core";
+	};
diff --git a/Bindings/media/pxa-camera.txt b/Bindings/media/pxa-camera.txt
new file mode 100644
index 000000000000..11f5b5d51af8
--- /dev/null
+++ b/Bindings/media/pxa-camera.txt
@@ -0,0 +1,43 @@
+Marvell PXA camera host interface
+
+Required properties:
+ - compatible: Should be "marvell,pxa270-qci"
+ - reg: register base and size
+ - interrupts: the interrupt number
+ - any required generic properties defined in video-interfaces.txt
+
+Optional properties:
+ - clocks: input clock (see clock-bindings.txt)
+ - clock-output-names: should contain the name of the clock driving the
+                       sensor master clock MCLK
+ - clock-frequency: host interface is driving MCLK, and MCLK rate is this rate
+
+Example:
+
+	pxa_camera: pxa_camera@50000000 {
+		compatible = "marvell,pxa270-qci";
+		reg = <0x50000000 0x1000>;
+		interrupts = <33>;
+
+		clocks = <&pxa2xx_clks 24>;
+		clock-names = "ciclk";
+		clock-frequency = <50000000>;
+		clock-output-names = "qci_mclk";
+
+		status = "okay";
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Parallel bus endpoint */
+			qci: endpoint@0 {
+				reg = <0>;		/* Local endpoint # */
+				remote-endpoint = <&mt9m111_1>;
+				bus-width = <8>;	/* Used data lines */
+				hsync-active = <0>;	/* Active low */
+				vsync-active = <0>;	/* Active low */
+				pclk-sample = <1>;	/* Rising */
+			};
+		};
+	};
diff --git a/Bindings/media/rcar_vin.txt b/Bindings/media/rcar_vin.txt
new file mode 100644
index 000000000000..ba61782c2af9
--- /dev/null
+++ b/Bindings/media/rcar_vin.txt
@@ -0,0 +1,86 @@
+Renesas RCar Video Input driver (rcar_vin)
+------------------------------------------
+
+The rcar_vin device provides video input capabilities for the Renesas R-Car
+family of devices. The current blocks are always slaves and suppot one input
+channel which can be either RGB, YUYV or BT656.
+
+ - compatible: Must be one of the following
+   - "renesas,vin-r8a7791" for the R8A7791 device
+   - "renesas,vin-r8a7790" for the R8A7790 device
+   - "renesas,vin-r8a7779" for the R8A7779 device
+   - "renesas,vin-r8a7778" for the R8A7778 device
+ - reg: the register base and size for the device registers
+ - interrupts: the interrupt for the device
+ - clocks: Reference to the parent clock
+
+Additionally, an alias named vinX will need to be created to specify
+which video input device this is.
+
+The per-board settings:
+ - port sub-node describing a single endpoint connected to the vin
+   as described in video-interfaces.txt[1]. Only the first one will
+   be considered as each vin interface has one input port.
+
+   These settings are used to work out video input format and widths
+   into the system.
+
+
+Device node example
+-------------------
+
+	aliases {
+	       vin0 = &vin0;
+	};
+
+        vin0: vin@0xe6ef0000 {
+                compatible = "renesas,vin-r8a7790";
+                clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+                reg = <0 0xe6ef0000 0 0x1000>;
+                interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+                status = "disabled";
+        };
+
+Board setup example (vin1 composite video input)
+------------------------------------------------
+
+&i2c2   {
+        status = "ok";
+        pinctrl-0 = <&i2c2_pins>;
+        pinctrl-names = "default";
+
+        adv7180@20 {
+                compatible = "adi,adv7180";
+                reg = <0x20>;
+                remote = <&vin1>;
+
+                port {
+                        adv7180: endpoint {
+                                bus-width = <8>;
+                                remote-endpoint = <&vin1ep0>;
+                        };
+                };
+        };
+};
+
+/* composite video input */
+&vin1 {
+        pinctrl-0 = <&vin1_pins>;
+        pinctrl-names = "default";
+
+        status = "ok";
+
+        port {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                vin1ep0: endpoint {
+                        remote-endpoint = <&adv7180>;
+                        bus-width = <8>;
+                };
+        };
+};
+
+
+
+[1] video-interfaces.txt common video media interface
diff --git a/Bindings/media/renesas,vsp1.txt b/Bindings/media/renesas,vsp1.txt
new file mode 100644
index 000000000000..87fe08abf36d
--- /dev/null
+++ b/Bindings/media/renesas,vsp1.txt
@@ -0,0 +1,43 @@
+* Renesas VSP1 Video Processing Engine
+
+The VSP1 is a video processing engine that supports up-/down-scaling, alpha
+blending, color space conversion and various other image processing features.
+It can be found in the Renesas R-Car second generation SoCs.
+
+Required properties:
+
+  - compatible: Must contain "renesas,vsp1"
+
+  - reg: Base address and length of the registers block for the VSP1.
+  - interrupts: VSP1 interrupt specifier.
+  - clocks: A phandle + clock-specifier pair for the VSP1 functional clock.
+
+  - renesas,#rpf: Number of Read Pixel Formatter (RPF) modules in the VSP1.
+  - renesas,#uds: Number of Up Down Scaler (UDS) modules in the VSP1.
+  - renesas,#wpf: Number of Write Pixel Formatter (WPF) modules in the VSP1.
+
+
+Optional properties:
+
+  - renesas,has-lif: Boolean, indicates that the LCD Interface (LIF) module is
+    available.
+  - renesas,has-lut: Boolean, indicates that the Look Up Table (LUT) module is
+    available.
+  - renesas,has-sru: Boolean, indicates that the Super Resolution Unit (SRU)
+    module is available.
+
+
+Example: R8A7790 (R-Car H2) VSP1-S node
+
+	vsp1@fe928000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe928000 0 0x8000>;
+		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+
+		renesas,has-lut;
+		renesas,has-sru;
+		renesas,#rpf = <5>;
+		renesas,#uds = <3>;
+		renesas,#wpf = <4>;
+	};
diff --git a/Bindings/media/samsung-s5c73m3.txt b/Bindings/media/samsung-s5c73m3.txt
new file mode 100644
index 000000000000..2c85c4538a6d
--- /dev/null
+++ b/Bindings/media/samsung-s5c73m3.txt
@@ -0,0 +1,97 @@
+Samsung S5C73M3 8Mp camera ISP
+------------------------------
+
+The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video
+data busses. The I2C bus is the main control bus and additionally the SPI bus
+is used, mostly for transferring the firmware to and from the device. Two
+slave device nodes corresponding to these control bus interfaces are required
+and should be placed under respective bus controller nodes.
+
+I2C slave device node
+---------------------
+
+Required properties:
+
+- compatible	    : "samsung,s5c73m3";
+- reg		    : I2C slave address of the sensor;
+- vdd-int-supply    : digital power supply (1.2V);
+- vdda-supply	    : analog power supply (1.2V);
+- vdd-reg-supply    : regulator input power supply (2.8V);
+- vddio-host-supply : host I/O power supply (1.8V to 2.8V);
+- vddio-cis-supply  : CIS I/O power supply (1.2V to 1.8V);
+- vdd-af-supply     : lens power supply (2.8V);
+- xshutdown-gpios   : specifier of GPIO connected to the XSHUTDOWN pin;
+- standby-gpios     : specifier of GPIO connected to the STANDBY pin;
+- clocks	    : should contain list of phandle and clock specifier pairs
+		      according to common clock bindings for the clocks described
+		      in the clock-names property;
+- clock-names	    : should contain "cis_extclk" entry for the CIS_EXTCLK clock;
+
+Optional properties:
+
+- clock-frequency   : the frequency at which the "cis_extclk" clock should be
+		      configured to operate, in Hz; if this property is not
+		      specified default 24 MHz value will be used.
+
+The common video interfaces bindings (see video-interfaces.txt) should be used
+to specify link from the S5C73M3 to an external image data receiver. The S5C73M3
+device node should contain one 'port' child node with an 'endpoint' subnode for
+this purpose. The data link from a raw image sensor to the S5C73M3 can be
+similarly specified, but it is optional since the S5C73M3 ISP and a raw image
+sensor are usually inseparable and form a hybrid module.
+
+Following properties are valid for the endpoint node(s):
+
+endpoint subnode
+----------------
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+  video-interfaces.txt. This sensor doesn't support data lane remapping
+  and physical lane indexes in subsequent elements of the array should
+  be only consecutive ascending values.
+
+SPI device node
+---------------
+
+Required properties:
+
+- compatible	    : "samsung,s5c73m3";
+
+For more details see description of the SPI busses bindings
+(../spi/spi-bus.txt) and bindings of a specific bus controller.
+
+Example:
+
+i2c@138A000000 {
+	...
+	s5c73m3@3c {
+		compatible = "samsung,s5c73m3";
+		reg = <0x3c>;
+		vdd-int-supply = <&buck9_reg>;
+		vdda-supply = <&ldo17_reg>;
+		vdd-reg-supply = <&cam_io_reg>;
+		vddio-host-supply = <&ldo18_reg>;
+		vddio-cis-supply = <&ldo9_reg>;
+		vdd-af-supply = <&cam_af_reg>;
+		clock-frequency = <24000000>;
+		clocks = <&clk 0>;
+		clock-names = "cis_extclk";
+		reset-gpios = <&gpf1 3 1>;
+		standby-gpios = <&gpm0 1 1>;
+		port {
+			s5c73m3_ep: endpoint {
+				remote-endpoint = <&csis0_ep>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+spi@1392000 {
+	...
+	s5c73m3_spi: s5c73m3@0 {
+		compatible = "samsung,s5c73m3";
+		reg = <0>;
+		...
+	};
+};
diff --git a/Bindings/media/samsung-s5k6a3.txt b/Bindings/media/samsung-s5k6a3.txt
new file mode 100644
index 000000000000..cce01e82f3e3
--- /dev/null
+++ b/Bindings/media/samsung-s5k6a3.txt
@@ -0,0 +1,33 @@
+Samsung S5K6A3(YX) raw image sensor
+---------------------------------
+
+S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
+and CCI (I2C compatible) control bus.
+
+Required properties:
+
+- compatible	: "samsung,s5k6a3";
+- reg		: I2C slave address of the sensor;
+- svdda-supply	: core voltage supply;
+- svddio-supply	: I/O voltage supply;
+- afvdd-supply	: AF (actuator) voltage supply;
+- gpios		: specifier of a GPIO connected to the RESET pin;
+- clocks	: should contain list of phandle and clock specifier pairs
+		  according to common clock bindings for the clocks described
+		  in the clock-names property;
+- clock-names	: should contain "extclk" entry for the sensor's EXTCLK clock;
+
+Optional properties:
+
+- clock-frequency : the frequency at which the "extclk" clock should be
+		    configured to operate, in Hz; if this property is not
+		    specified default 24 MHz value will be used.
+
+The common video interfaces bindings (see video-interfaces.txt) should be
+used to specify link to the image data receiver. The S5K6A3(YX) device
+node should contain one 'port' child node with an 'endpoint' subnode.
+
+Following properties are valid for the endpoint node:
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+  video-interfaces.txt.  The sensor supports only one data lane.
diff --git a/Bindings/media/sunxi-ir.txt b/Bindings/media/sunxi-ir.txt
new file mode 100644
index 000000000000..23dd5ad07b7c
--- /dev/null
+++ b/Bindings/media/sunxi-ir.txt
@@ -0,0 +1,23 @@
+Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
+
+Required properties:
+- compatible	    : should be "allwinner,sun4i-a10-ir";
+- clocks	    : list of clock specifiers, corresponding to
+		      entries in clock-names property;
+- clock-names	    : should contain "apb" and "ir" entries;
+- interrupts	    : should contain IR IRQ number;
+- reg		    : should contain IO map address for IR.
+
+Optional properties:
+- linux,rc-map-name : Remote control map name.
+
+Example:
+
+ir0: ir@01c21800 {
+	compatible = "allwinner,sun4i-a10-ir";
+	clocks = <&apb0_gates 6>, <&ir0_clk>;
+	clock-names = "apb", "ir";
+	interrupts = <0 5 1>;
+	reg = <0x01C21800 0x40>;
+	linux,rc-map-name = "rc-rc6-mce";
+};
diff --git a/Bindings/memory-controllers/fsl/ifc.txt b/Bindings/memory-controllers/fsl/ifc.txt
new file mode 100644
index 000000000000..d5e370450ac0
--- /dev/null
+++ b/Bindings/memory-controllers/fsl/ifc.txt
@@ -0,0 +1,79 @@
+Integrated Flash Controller
+
+Properties:
+- name : Should be ifc
+- compatible : should contain "fsl,ifc". The version of the integrated
+               flash controller can be found in the IFC_REV register at
+               offset zero.
+
+- #address-cells : Should be either two or three.  The first cell is the
+                   chipselect number, and the remaining cells are the
+                   offset into the chipselect.
+- #size-cells : Either one or two, depending on how large each chipselect
+                can be.
+- reg : Offset and length of the register set for the device
+- interrupts: IFC may have one or two interrupts.  If two interrupt
+              specifiers are present, the first is the "common"
+              interrupt (CM_EVTER_STAT), and the second is the NAND
+              interrupt (NAND_EVTER_STAT).  If there is only one,
+              that interrupt reports both types of event.
+
+
+- ranges : Each range corresponds to a single chipselect, and covers
+           the entire access window as configured.
+
+Child device nodes describe the devices connected to IFC such as NOR (e.g.
+cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+like FPGAs, CPLDs, etc.
+
+Example:
+
+	ifc@ffe1e000 {
+		compatible = "fsl,ifc", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x0 0xffe1e000 0 0x2000>;
+		interrupts = <16 2 19 2>;
+
+		/* NOR, NAND Flashes and CPLD on board */
+		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+			  0x1 0x0 0x0 0xffa00000 0x00010000
+			  0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* 32MB for user data */
+				reg = <0x0 0x02000000>;
+				label = "NOR Data";
+			};
+		};
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x1 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+		};
+
+		cpld@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1010rdb-cpld";
+			reg = <0x3 0x0 0x000001f>;
+		};
+	};
diff --git a/Bindings/memory-controllers/ti-aemif.txt b/Bindings/memory-controllers/ti-aemif.txt
new file mode 100644
index 000000000000..9592717f483f
--- /dev/null
+++ b/Bindings/memory-controllers/ti-aemif.txt
@@ -0,0 +1,210 @@
+* Device tree bindings for Texas instruments AEMIF controller
+
+The Async External Memory Interface (EMIF16/AEMIF) controller is intended to
+provide a glue-less interface to a variety of asynchronous memory devices like
+ASRA M, NOR and NAND memory. A total of 256M bytes of any of these memories
+can be accessed at any given time via four chip selects with 64M byte access
+per chip select. Synchronous memories such as DDR1 SD RAM, SDR SDRAM
+and Mobile SDR are not supported.
+
+Documentation:
+Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
+OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
+Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
+
+Required properties:
+
+- compatible:		"ti,davinci-aemif"
+			"ti,keystone-aemif"
+			"ti,da850-aemif"
+
+- reg:			contains offset/length value for AEMIF control registers
+			space.
+
+- #address-cells:	Must be 2. The partition number has to be encoded in the
+			first address cell and it may accept values 0..N-1
+			(N - total number of partitions). It's recommended to
+			assign N-1 number for the control partition. The second
+			cell is the offset into the partition.
+
+- #size-cells:		Must be set to 1.
+
+- ranges:		Contains memory regions. There are two types of
+			ranges/partitions:
+			- CS-specific partition/range. If continuous, must be
+			set up to reflect the memory layout for 4 chipselects,
+			if not then additional range/partition can be added and
+			child device can select the proper one.
+			- control partition which is common for all CS
+			interfaces.
+
+- clocks:		the clock feeding the controller clock. Required only
+			if clock tree data present in device tree.
+			See clock-bindings.txt
+
+- clock-names:		clock name. It has to be "aemif". Required only if clock
+			tree data present in device tree, in another case don't
+			use it.
+			See clock-bindings.txt
+
+- clock-ranges:		Empty property indicating that child nodes can inherit
+			named clocks. Required only if clock tree data present
+			in device tree.
+			See clock-bindings.txt
+
+
+Child chip-select (cs) nodes contain the memory devices nodes connected to
+such as NOR (e.g. cfi-flash) and NAND (ti,davinci-nand, see davinci-nand.txt).
+There might be board specific devices like FPGAs.
+
+Required child cs node properties:
+
+- #address-cells:	Must be 2.
+
+- #size-cells:		Must be 1.
+
+- ranges:		Empty property indicating that child nodes can inherit
+			memory layout.
+
+- clock-ranges:		Empty property indicating that child nodes can inherit
+			named clocks. Required only if clock tree data present
+			in device tree.
+
+- ti,cs-chipselect:	number of chipselect. Indicates on the aemif driver
+			which chipselect is used for accessing the memory. For
+			compatibles "ti,davinci-aemif" and "ti,keystone-aemif"
+			it can be in range [0-3]. For compatible
+			"ti,da850-aemif" range is [2-5].
+
+Optional child cs node properties:
+
+- ti,cs-bus-width:		width of the asynchronous device's data bus
+				8 or 16 if not preset 8
+
+- ti,cs-select-strobe-mode:	enable/disable select strobe mode
+				In select strobe mode chip select behaves as
+				the strobe and is active only during the strobe
+				period. If present then enable.
+
+- ti,cs-extended-wait-mode:	enable/disable extended wait mode
+				if set, the controller monitors the EMIFWAIT pin
+				mapped to that chip select to determine if the
+				device wants to extend the strobe period. If
+				present then enable.
+
+- ti,cs-min-turnaround-ns:	minimum turn around time, ns
+				Time between the end of one asynchronous memory
+				access and the start of another asynchronous
+				memory access. This delay is not incurred
+				between a read followed by read or a write
+				followed by a write to same chip select.
+
+- ti,cs-read-setup-ns:		read setup width, ns
+				Time between the beginning of a memory cycle
+				and the activation of read strobe.
+				Minimum value is 1 (0 treated as 1).
+
+- ti,cs-read-strobe-ns:		read strobe width, ns
+				Time between the activation and deactivation of
+				the read strobe.
+				Minimum value is 1 (0 treated as 1).
+
+- ti,cs-read-hold-ns:		read hold width, ns
+				Time between the deactivation of the read
+				strobe and the end of the cycle (which may be
+				either an address change or the deactivation of
+				the chip select signal.
+				Minimum value is 1 (0 treated as 1).
+
+- ti,cs-write-setup-ns:		write setup width, ns
+				Time between the beginning of a memory cycle
+				and the activation of write strobe.
+				Minimum value is 1 (0 treated as 1).
+
+- ti,cs-write-strobe-ns:	write strobe width, ns
+				Time between the activation and deactivation of
+				the write strobe.
+				Minimum value is 1 (0 treated as 1).
+
+- ti,cs-write-hold-ns:		write hold width, ns
+				Time between the deactivation of the write
+				strobe and the end of the cycle (which may be
+				either an address change or the deactivation of
+				the chip select signal.
+				Minimum value is 1 (0 treated as 1).
+
+If any of the above parameters are absent, current parameter value will be taken
+from the corresponding HW reg.
+
+Example for aemif, davinci nand and nor flash chip select shown below.
+
+memory-controller@21000A00 {
+	compatible = "ti,davinci-aemif";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	clocks = <&clkaemif 0>;
+	clock-names = "aemif";
+	clock-ranges;
+	reg = <0x21000A00 0x00000100>;
+	ranges = <0 0 0x70000000 0x10000000
+		  1 0 0x21000A00 0x00000100>;
+		  /*
+		   * Partition0: CS-specific memory range which is
+		   * implemented as continuous physical memory region
+		   * Partition1: control memory range
+		   */
+
+	nand:cs2 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <2>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <0>;
+		ti,cs-read-hold-ns = <7>;
+		ti,cs-read-strobe-ns = <42>;
+		ti,cs-read-setup-ns = <14>;
+		ti,cs-write-hold-ns = <7>;
+		ti,cs-write-strobe-ns = <42>;
+		ti,cs-write-setup-ns = <14>;
+
+		nand@0,0x8000000 {
+			compatible = "ti,davinci-nand";
+			reg = <0 0x8000000 0x4000000
+			       1 0x0000000 0x0000100>;
+			/*
+			 * Partition0, offset 0x8000000, size 0x4000000
+			 * Partition1, offset 0x0000000, size 0x0000100
+			 */
+
+			.. see davinci-nand.txt
+		};
+	};
+
+	nor:cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <0>;
+		ti,cs-read-hold-ns = <8>;
+		ti,cs-read-strobe-ns = <40>;
+		ti,cs-read-setup-ns = <14>;
+		ti,cs-write-hold-ns = <7>;
+		ti,cs-write-strobe-ns = <40>;
+		ti,cs-write-setup-ns = <14>;
+		ti,cs-bus-width = <16>;
+
+		flash@0,0x0000000 {
+			compatible = "cfi-flash";
+			reg = <0 0x0000000 0x4000000>;
+
+			...
+		};
+	};
+};
diff --git a/Bindings/mfd/bcm590xx.txt b/Bindings/mfd/bcm590xx.txt
new file mode 100644
index 000000000000..be51a15e05f9
--- /dev/null
+++ b/Bindings/mfd/bcm590xx.txt
@@ -0,0 +1,39 @@
+-------------------------------
+BCM590xx Power Management Units
+-------------------------------
+
+Required properties:
+- compatible: "brcm,bcm59056"
+- reg: I2C slave address
+- interrupts: interrupt for the PMU. Generic interrupt client node bindings
+  are described in interrupt-controller/interrupts.txt
+
+------------------
+Voltage Regulators
+------------------
+
+Optional child nodes:
+- regulators: container node for regulators following the generic
+  regulator binding in regulator/regulator.txt
+
+  The valid regulator node names for BCM59056 are:
+  	rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
+	mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
+	csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
+	gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
+	vbus
+
+Example:
+	pmu: bcm59056@8 {
+		compatible = "brcm,bcm59056";
+		reg = <0x08>;
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+		regulators {
+			rfldo_reg: rfldo {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			...
+		};
+	};
diff --git a/Bindings/mfd/bfticu.txt b/Bindings/mfd/bfticu.txt
new file mode 100644
index 000000000000..65c90776c620
--- /dev/null
+++ b/Bindings/mfd/bfticu.txt
@@ -0,0 +1,25 @@
+KEYMILE bfticu Chassis Management FPGA
+
+The bfticu is a multifunction device that manages the whole chassis.
+Its main functionality is to collect IRQs from the whole chassis and signals
+them to a single controller.
+
+Required properties:
+- compatible: "keymile,bfticu"
+- interrupt-controller: the bfticu FPGA is an interrupt controller
+- interrupts: the main IRQ line to signal the collected IRQs
+- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant
+  of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to
+- reg: access on the parent local bus (chip select, offset in chip select, size)
+
+Example:
+
+	chassis-mgmt@3,0 {
+		compatible = "keymile,bfticu";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <3 0 0x100>;
+		interrupt-parent = <&mpic>;
+		interrupts = <6 1 0 0>;
+	};
diff --git a/Bindings/mfd/da9055.txt b/Bindings/mfd/da9055.txt
new file mode 100644
index 000000000000..6dab34d34fce
--- /dev/null
+++ b/Bindings/mfd/da9055.txt
@@ -0,0 +1,72 @@
+* Dialog DA9055 Power Management Integrated Circuit (PMIC)
+
+DA9055 consists of a large and varied group of sub-devices (I2C Only):
+
+Device			 Supply Names	 Description
+------			 ------------	 -----------
+da9055-gpio		:		: GPIOs
+da9055-regulator	:		: Regulators
+da9055-onkey		:		: On key
+da9055-rtc		:		: RTC
+da9055-hwmon		:		: ADC
+da9055-watchdog		:		: Watchdog
+
+The CODEC device in DA9055 has a separate, configurable I2C address and so
+is instantiated separately from the PMIC.
+
+For details on accompanying CODEC I2C device, see the following:
+Documentation/devicetree/bindings/sound/da9055.txt
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da9055-pmic"
+- reg: Specifies the I2C slave address (defaults to 0x5a but can be modified)
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the IRQs from da9055 are delivered to.
+- interrupts: IRQ line info for da9055 chip.
+- interrupt-controller: da9055 has internal IRQs (has own IRQ domain).
+- #interrupt-cells: Should be 1, is the local IRQ number for da9055.
+
+Sub-nodes:
+- regulators : Contain the regulator nodes. The DA9055 regulators are
+  bound using their names as listed below:
+
+    buck1     : regulator BUCK1
+    buck2     : regulator BUCK2
+    ldo1      : regulator LDO1
+    ldo2      : regulator LDO2
+    ldo3      : regulator LDO3
+    ldo4      : regulator LDO4
+    ldo5      : regulator LDO5
+    ldo6      : regulator LDO6
+
+  The bindings details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Example:
+
+	pmic: da9055-pmic@5a {
+		compatible = "dlg,da9055-pmic";
+		reg = <0x5a>;
+		interrupt-parent = <&intc>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <2075000>;
+			};
+			buck2: BUCK2 {
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+			};
+			ldo1: LDO1 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
diff --git a/Bindings/mfd/qcom,pm8xxx.txt b/Bindings/mfd/qcom,pm8xxx.txt
new file mode 100644
index 000000000000..03518dc8b6bd
--- /dev/null
+++ b/Bindings/mfd/qcom,pm8xxx.txt
@@ -0,0 +1,96 @@
+Qualcomm PM8xxx PMIC multi-function devices
+
+The PM8xxx family of Power Management ICs are used to provide regulated
+voltages and other various functionality to Qualcomm SoCs.
+
+= PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058"
+		    "qcom,pm8921"
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 0
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: specifies the interrupt that indicates a subdevice
+		    has generated an interrupt (summary interrupt). The
+		    format of the specifier is defined by the binding document
+		    describing the node's interrupt parent.
+
+- #interrupt-cells:
+	Usage: required
+	Value type : <u32>
+	Definition: must be 2. Specifies the number of cells needed to encode
+		    an interrupt source. The 1st cell contains the interrupt
+		    number. The 2nd cell is the trigger type and level flags
+		    encoded as follows:
+
+			1 = low-to-high edge triggered
+			2 = high-to-low edge triggered
+			4 = active high level-sensitive
+			8 = active low level-sensitive
+
+- interrupt-controller:
+	Usage: required
+	Value type: <empty>
+	Definition: identifies this node as an interrupt controller
+
+= SUBCOMPONENTS
+
+The PMIC contains multiple independent functions, each described in a subnode.
+The below bindings specify the set of valid subnodes.
+
+== Real-Time Clock
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058-rtc"
+		    "qcom,pm8921-rtc"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: single entry specifying the base address of the RTC registers
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: single entry specifying the RTC's alarm interrupt
+
+- allow-set-time:
+	Usage: optional
+	Value type: <empty>
+	Definition: indicates that the setting of RTC time is allowed by
+		    the host CPU
+
+= EXAMPLE
+
+	pmicintc: pmic@0 {
+		compatible = "qcom,pm8921";
+		interrupts = <104 8>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts = <0x27 0>;
+		};
+	};
diff --git a/Bindings/mfd/qriox.txt b/Bindings/mfd/qriox.txt
new file mode 100644
index 000000000000..f301e2d4ce76
--- /dev/null
+++ b/Bindings/mfd/qriox.txt
@@ -0,0 +1,17 @@
+KEYMILE qrio Board Control CPLD
+
+The qrio is a multifunction device that controls the KEYMILE boards based on
+the kmp204x design.
+It is consists of a reset controller, watchdog timer, LEDs, and 2 IRQ capable
+GPIO blocks.
+
+Required properties:
+- compatible: "keymile,qriox"
+- reg: access on the parent local bus (chip select, offset in chip select, size)
+
+Example:
+
+	board-control@1,0 {
+		compatible = "keymile,qriox";
+		reg = <1 0 0x80>;
+	};
diff --git a/Bindings/mfd/s2mpa01.txt b/Bindings/mfd/s2mpa01.txt
new file mode 100644
index 000000000000..c13d3d8c3947
--- /dev/null
+++ b/Bindings/mfd/s2mpa01.txt
@@ -0,0 +1,90 @@
+
+* Samsung S2MPA01 Voltage and Current Regulator
+
+The Samsung S2MPA01 is a multi-function device which includes high
+efficiency buck converters including Dual-Phase buck converter, various LDOs,
+and an RTC. It is interfaced to the host controller using an I2C interface.
+Each sub-block is addressed by the host system using different I2C slave
+addresses.
+
+Required properties:
+- compatible: Should be "samsung,s2mpa01-pmic".
+- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from s2mpa01 are delivered to.
+- interrupts: An interrupt specifier for the sole interrupt generated by the
+  device.
+
+Optional nodes:
+- regulators: The regulators of s2mpa01 that have to be instantiated should be
+  included in a sub-node named 'regulators'. Regulator nodes and constraints
+  included in this sub-node use the standard regulator bindings which are
+  documented elsewhere.
+
+Properties for BUCK regulator nodes:
+- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
+  (default), 25000, or 50000. May be 0 for disabling the ramp delay on
+  BUCK{1,2,3,4}.
+
+ In the absence of the regulator-ramp-delay property, the default ramp
+ delay will be used.
+
+  NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
+  for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
+
+  The following BUCKs share ramp settings:
+  * 1 and 6
+  * 2 and 4
+  * 8, 9, and 10
+
+The following are the names of the regulators that the s2mpa01 PMIC block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of s2mpa01.
+
+	- LDOn
+		  - valid values for n are 1 to 26
+		  - Example: LDO1, LD02, LDO26
+	- BUCKn
+		  - valid values for n are 1 to 10.
+		  - Example: BUCK1, BUCK2, BUCK9
+
+Example:
+
+	s2mpa01_pmic@66 {
+		compatible = "samsung,s2mpa01-pmic";
+		reg = <0x66>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_MMC2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <50000>;
+			};
+		};
+	};
diff --git a/Bindings/mfd/sun6i-prcm.txt b/Bindings/mfd/sun6i-prcm.txt
new file mode 100644
index 000000000000..03c5a551da55
--- /dev/null
+++ b/Bindings/mfd/sun6i-prcm.txt
@@ -0,0 +1,59 @@
+* Allwinner PRCM (Power/Reset/Clock Management) Multi-Functional Device
+
+PRCM is an MFD device exposing several Power Management related devices
+(like clks and reset controllers).
+
+Required properties:
+ - compatible: "allwinner,sun6i-a31-prcm" or "allwinner,sun8i-a23-prcm"
+ - reg: The PRCM registers range
+
+The prcm node may contain several subdevices definitions:
+ - see Documentation/devicetree/clk/sunxi.txt for clock devices
+ - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
+   controller devices
+
+
+Example:
+
+	prcm: prcm@01f01400 {
+		compatible = "allwinner,sun6i-a31-prcm";
+		reg = <0x01f01400 0x200>;
+
+		/* Put subdevices here */
+		ar100: ar100_clk {
+			compatible = "allwinner,sun6i-a31-ar100-clk";
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+		};
+
+		ahb0: ahb0_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&ar100_div>;
+			clock-output-names = "ahb0";
+		};
+
+		apb0: apb0_clk {
+			compatible = "allwinner,sun6i-a31-apb0-clk";
+			#clock-cells = <0>;
+			clocks = <&ahb0>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: apb0_gates_clk {
+			compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+			#clock-cells = <1>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_pio", "apb0_ir",
+					"apb0_timer01", "apb0_p2wi",
+					"apb0_uart", "apb0_1wire",
+					"apb0_i2c";
+		};
+
+		apb0_rst: apb0_rst {
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+	};
diff --git a/Bindings/mfd/ti-keystone-devctrl.txt b/Bindings/mfd/ti-keystone-devctrl.txt
new file mode 100644
index 000000000000..20963c76b4bc
--- /dev/null
+++ b/Bindings/mfd/ti-keystone-devctrl.txt
@@ -0,0 +1,19 @@
+* Device tree bindings for Texas Instruments keystone device state control
+
+The Keystone II devices have a set of registers that are used to control
+the status of its peripherals. This node is intended to allow access to
+this functionality.
+
+Required properties:
+
+- compatible:		"ti,keystone-devctrl", "syscon"
+
+- reg:			contains offset/length value for device state control
+			registers space.
+
+Example:
+
+devctrl: device-state-control@0x02620000 {
+	compatible = "ti,keystone-devctrl", "syscon";
+	reg = <0x02620000 0x1000>;
+};
diff --git a/Bindings/misc/arm-charlcd.txt b/Bindings/misc/arm-charlcd.txt
new file mode 100644
index 000000000000..e28e2aac47f1
--- /dev/null
+++ b/Bindings/misc/arm-charlcd.txt
@@ -0,0 +1,18 @@
+ARM Versatile Character LCD
+-----------------------------------------------------
+This binding defines the character LCD interface found on ARM Versatile AB
+and PB reference platforms.
+
+Required properties:
+- compatible : "arm,versatile-clcd"
+- reg : Location and size of character LCD registers
+
+Optional properties:
+- interrupts - single interrupt for character LCD. The character LCD can
+  operate in polled mode without an interrupt.
+
+Example:
+	lcd@10008000 {
+		compatible = "arm,versatile-lcd";
+		reg = <0x10008000 0x1000>;
+	};
diff --git a/Bindings/misc/nvidia,tegra20-apbmisc.txt b/Bindings/misc/nvidia,tegra20-apbmisc.txt
new file mode 100644
index 000000000000..b97b8bef1fe5
--- /dev/null
+++ b/Bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -0,0 +1,13 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
+
+Required properties:
+- compatible : should be:
+       "nvidia,tegra20-apbmisc"
+       "nvidia,tegra30-apbmisc"
+       "nvidia,tegra114-apbmisc"
+       "nvidia,tegra124-apbmisc"
+- reg: Should contain 2 entries: the first entry gives the physical address
+       and length of the registers which contain revision and debug features.
+       The second entry gives the physical address and length of the
+       registers indicating the strapping options.
+
diff --git a/Bindings/mmc/moxa,moxart-mmc.txt b/Bindings/mmc/moxa,moxart-mmc.txt
new file mode 100644
index 000000000000..b63819149f22
--- /dev/null
+++ b/Bindings/mmc/moxa,moxart-mmc.txt
@@ -0,0 +1,30 @@
+MOXA ART MMC Host Controller Interface
+
+  Inherits from mmc binding[1].
+
+  [1] Documentation/devicetree/bindings/mmc/mmc.txt
+
+Required properties:
+
+- compatible :	Must be "moxa,moxart-mmc" or "faraday,ftsdc010"
+- reg :		Should contain registers location and length
+- interrupts :	Should contain the interrupt number
+- clocks :	Should contain phandle for the clock feeding the MMC controller
+
+Optional properties:
+
+- dmas :	Should contain two DMA channels, line request number must be 5 for
+		both channels
+- dma-names :	Must be "tx", "rx"
+
+Example:
+
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
+		reg = <0x98e00000 0x5C>;
+		interrupts = <5 0>;
+		clocks = <&clk_apb>;
+		dmas =  <&dma 5>,
+			<&dma 5>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Bindings/mmc/renesas,mmcif.txt b/Bindings/mmc/renesas,mmcif.txt
new file mode 100644
index 000000000000..299081f94abd
--- /dev/null
+++ b/Bindings/mmc/renesas,mmcif.txt
@@ -0,0 +1,32 @@
+* Renesas Multi Media Card Interface (MMCIF) Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the MMCIF device.
+
+
+Required properties:
+
+- compatible: must contain one of the following
+	- "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
+	- "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs
+	- "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs
+	- "renesas,sh-mmcif" for the generic MMCIF
+
+- clocks: reference to the functional clock
+
+- dmas: reference to the DMA channels, one per channel name listed in the
+  dma-names property.
+- dma-names: must contain "tx" for the transmit DMA channel and "rx" for the
+  receive DMA channel.
+
+
+Example: R8A7790 (R-Car H2) MMCIF0
+
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Bindings/mmc/sdhci-msm.txt b/Bindings/mmc/sdhci-msm.txt
new file mode 100644
index 000000000000..485483a63d8c
--- /dev/null
+++ b/Bindings/mmc/sdhci-msm.txt
@@ -0,0 +1,55 @@
+* Qualcomm SDHCI controller (sdhci-msm)
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-msm driver.
+
+Required properties:
+- compatible: Should contain "qcom,sdhci-msm-v4".
+- reg: Base address and length of the register in the following order:
+	- Host controller register map (required)
+	- SD Core register map (required)
+- interrupts: Should contain an interrupt-specifiers for the interrupts:
+	- Host controller interrupt (required)
+- pinctrl-names: Should contain only one value - "default".
+- pinctrl-0: Should specify pin control groups used for this controller.
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
+- clock-names: Should contain the following:
+	"iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
+	"core"	- SDC MMC clock (MCLK) (required)
+	"bus"	- SDCC bus voter clock (optional)
+
+Example:
+
+	sdhc_1: sdhci@f9824900 {
+		compatible = "qcom,sdhci-msm-v4";
+		reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+		interrupts = <0 123 0>;
+		bus-width = <8>;
+		non-removable;
+
+		vmmc-supply = <&pm8941_l20>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
+
+		clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+		clock-names = "core", "iface";
+	};
+
+	sdhc_2: sdhci@f98a4900 {
+		compatible = "qcom,sdhci-msm-v4";
+		reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+		interrupts = <0 125 0>;
+		bus-width = <4>;
+		cd-gpios = <&msmgpio 62 0x1>;
+
+		vmmc-supply = <&pm8941_l21>;
+		vqmmc-supply = <&pm8941_l13>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
+
+		clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+		clock-names = "core", "iface";
+	};
diff --git a/Bindings/mmc/sdhci-st.txt b/Bindings/mmc/sdhci-st.txt
new file mode 100644
index 000000000000..7527db447a35
--- /dev/null
+++ b/Bindings/mmc/sdhci-st.txt
@@ -0,0 +1,33 @@
+* STMicroelectronics sdhci-st MMC/SD controller
+
+This file documents the differences between the core properties in
+Documentation/devicetree/bindings/mmc/mmc.txt and the properties
+used by the sdhci-st driver.
+
+Required properties:
+- compatible :  Must be "st,sdhci"
+- clock-names : Should be "mmc"
+                See: Documentation/devicetree/bindings/resource-names.txt
+- clocks :      Phandle of the clock used by the sdhci controler
+                See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+- non-removable: non-removable slot
+                 See: Documentation/devicetree/bindings/mmc/mmc.txt
+- bus-width: Number of data lines
+                 See: Documentation/devicetree/bindings/mmc/mmc.txt
+
+Example:
+
+mmc0: sdhci@fe81e000 {
+	compatible	= "st,sdhci";
+	status		= "disabled";
+	reg		= <0xfe81e000 0x1000>;
+	interrupts	= <GIC_SPI 127 IRQ_TYPE_NONE>;
+	interrupt-names	= "mmcirq";
+	pinctrl-names	= "default";
+	pinctrl-0	= <&pinctrl_mmc0>;
+	clock-names	= "mmc";
+	clocks		= <&clk_s_a1_ls 1>;
+	bus-width       = <8>
+};
diff --git a/Bindings/mmc/socfpga-dw-mshc.txt b/Bindings/mmc/socfpga-dw-mshc.txt
new file mode 100644
index 000000000000..4897bea7e3f8
--- /dev/null
+++ b/Bindings/mmc/socfpga-dw-mshc.txt
@@ -0,0 +1,23 @@
+* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile
+  Storage Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+	- "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform
+
+Example:
+
+	mmc: dwmmc0@ff704000 {
+		compatible = "altr,socfpga-dw-mshc";
+		reg = <0xff704000 0x1000>;
+		interrupts = <0 129 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Bindings/mmc/sunxi-mmc.txt b/Bindings/mmc/sunxi-mmc.txt
new file mode 100644
index 000000000000..91b3a3467150
--- /dev/null
+++ b/Bindings/mmc/sunxi-mmc.txt
@@ -0,0 +1,43 @@
+* Allwinner sunxi MMC controller
+
+The highspeed MMC host controller on Allwinner SoCs provides an interface
+for MMC, SD and SDIO types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.5 as well
+as the speed of SD standard 3.0.
+Absolute maximum transfer rate is 200MB/s
+
+Required properties:
+ - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc"
+ - reg : mmc controller base registers
+ - clocks : a list with 2 phandle + clock specifier pairs
+ - clock-names : must contain "ahb" and "mmc"
+ - interrupts : mmc controller interrupt
+
+Optional properties:
+ - resets : phandle + reset specifier pair
+ - reset-names : must contain "ahb"
+ - for cd, bus-width and additional generic mmc parameters
+   please refer to mmc.txt within this directory
+
+Examples:
+	- Within .dtsi:
+	mmc0: mmc@01c0f000 {
+		compatible = "allwinner,sun5i-a13-mmc";
+		reg = <0x01c0f000 0x1000>;
+		clocks = <&ahb_gates 8>, <&mmc0_clk>;
+		clock-names = "ahb", "mod";
+		interrupts = <0 32 4>;
+		status = "disabled";
+	};
+
+	- Within dts:
+	mmc0: mmc@01c0f000 {
+		pinctrl-names = "default", "default";
+		pinctrl-0 = <&mmc0_pins_a>;
+		pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+		bus-width = <4>;
+		cd-gpios = <&pio 7 1 0>; /* PH1 */
+		cd-inverted;
+		status = "okay";
+	};
diff --git a/Bindings/mmc/usdhi6rol0.txt b/Bindings/mmc/usdhi6rol0.txt
new file mode 100644
index 000000000000..8babdaa8623b
--- /dev/null
+++ b/Bindings/mmc/usdhi6rol0.txt
@@ -0,0 +1,33 @@
+* Renesas usdhi6rol0 SD/SDIO host controller
+
+Required properties:
+
+- compatible:	must be
+		"renesas,usdhi6rol0"
+- interrupts:	3 interrupts, named "card detect", "data" and "SDIO" must be
+		specified
+- clocks:	a clock binding for the IMCLK input
+
+Optional properties:
+
+- vmmc-supply:	a phandle of a regulator, supplying Vcc to the card
+- vqmmc-supply:	a phandle of a regulator, supplying VccQ to the card
+
+Additionally any standard mmc bindings from mmc.txt can be used.
+
+Example:
+
+sd0: sd@ab000000 {
+	compatible = "renesas,usdhi6rol0";
+	reg = <0xab000000 0x200>;
+	interrupts = <0 23 0x4
+		      0 24 0x4
+		      0 25 0x4>;
+	interrupt-names = "card detect", "data", "SDIO";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-power-off-card;
+	clocks = <&imclk>;
+	vmmc-supply = <&vcc_sd0>;
+	vqmmc-supply = <&vccq_sd0>;
+};
diff --git a/Bindings/mtd/fsl-quadspi.txt b/Bindings/mtd/fsl-quadspi.txt
new file mode 100644
index 000000000000..823d13412195
--- /dev/null
+++ b/Bindings/mtd/fsl-quadspi.txt
@@ -0,0 +1,35 @@
+* Freescale Quad Serial Peripheral Interface(QuadSPI)
+
+Required properties:
+  - compatible : Should be "fsl,vf610-qspi"
+  - reg : the first contains the register location and length,
+          the second contains the memory mapping address and length
+  - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
+  - interrupts : Should contain the interrupt for the device
+  - clocks : The clocks needed by the QuadSPI controller
+  - clock-names : the name of the clocks
+
+Optional properties:
+  - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B.
+                              Each bus can be connected with two NOR flashes.
+			      Most of the time, each bus only has one NOR flash
+			      connected, this is the default case.
+			      But if there are two NOR flashes connected to the
+			      bus, you should enable this property.
+			      (Please check the board's schematic.)
+
+Example:
+
+qspi0: quadspi@40044000 {
+	compatible = "fsl,vf610-qspi";
+	reg = <0x40044000 0x1000>, <0x20000000 0x10000000>;
+	reg-names = "QuadSPI", "QuadSPI-memory";
+	interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks VF610_CLK_QSPI0_EN>,
+		<&clks VF610_CLK_QSPI0>;
+	clock-names = "qspi_en", "qspi";
+
+	flash0: s25fl128s@0 {
+		....
+	};
+};
diff --git a/Bindings/mtd/st-fsm.txt b/Bindings/mtd/st-fsm.txt
new file mode 100644
index 000000000000..c2489391c437
--- /dev/null
+++ b/Bindings/mtd/st-fsm.txt
@@ -0,0 +1,26 @@
+* ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
+
+Required properties:
+  - compatible : Should be "st,spi-fsm"
+  - reg        : Contains register's location and length.
+  - reg-names  : Should contain the reg names "spi-fsm"
+  - interrupts : The interrupt number
+  - pinctrl-0  : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+
+Optional properties:
+  - st,syscfg          : Phandle to boot-device system configuration registers
+  - st,boot-device-reg : Address of the aforementioned boot-device register(s)
+  - st,boot-device-spi : Expected boot-device value if booted via this device
+
+Example:
+	spifsm: spifsm@fe902000{
+	        compatible         = "st,spi-fsm";
+	        reg                =  <0xfe902000 0x1000>;
+	        reg-names          = "spi-fsm";
+	        pinctrl-0          = <&pinctrl_fsm>;
+		st,syscfg	   = <&syscfg_rear>;
+	        st,boot-device-reg = <0x958>;
+	        st,boot-device-spi = <0x1a>;
+		status = "okay";
+	};
+
diff --git a/Bindings/net/altera_tse.txt b/Bindings/net/altera_tse.txt
new file mode 100644
index 000000000000..a706297998e9
--- /dev/null
+++ b/Bindings/net/altera_tse.txt
@@ -0,0 +1,114 @@
+* Altera Triple-Speed Ethernet MAC driver (TSE)
+
+Required properties:
+- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should
+		be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE.
+		ALTR is supported for legacy device trees, but is deprecated.
+		altr should be used for all new designs.
+- reg: Address and length of the register set for the device. It contains
+  the information of registers in the same order as described by reg-names
+- reg-names: Should contain the reg names
+  "control_port": MAC configuration space region
+  "tx_csr":       xDMA Tx dispatcher control and status space region
+  "tx_desc":      MSGDMA Tx dispatcher descriptor space region
+  "rx_csr" :      xDMA Rx dispatcher control and status space region
+  "rx_desc":      MSGDMA Rx dispatcher descriptor space region
+  "rx_resp":      MSGDMA Rx dispatcher response space region
+  "s1":		  SGDMA descriptor memory
+- interrupts: Should contain the TSE interrupts and it's mode.
+- interrupt-names: Should contain the interrupt names
+  "rx_irq":       xDMA Rx dispatcher interrupt
+  "tx_irq":       xDMA Tx dispatcher interrupt
+- rx-fifo-depth: MAC receive FIFO buffer depth in bytes
+- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes
+- phy-mode: See ethernet.txt in the same directory.
+- phy-handle: See ethernet.txt in the same directory.
+- phy-addr: See ethernet.txt in the same directory. A configuration should
+		include phy-handle or phy-addr.
+- altr,has-supplementary-unicast:
+		If present, TSE supports additional unicast addresses.
+		Otherwise additional unicast addresses are not supported.
+- altr,has-hash-multicast-filter:
+		If present, TSE supports a hash based multicast filter.
+		Otherwise, hash-based multicast filtering is not supported.
+
+- mdio device tree subnode: When the TSE has a phy connected to its local
+		mdio, there must be device tree subnode with the following
+		required properties:
+
+	- compatible: Must be "altr,tse-mdio".
+	- #address-cells: Must be <1>.
+	- #size-cells: Must be <0>.
+
+	For each phy on the mdio bus, there must be a node with the following
+	fields:
+
+	- reg: phy id used to communicate to phy.
+	- device_type: Must be "ethernet-phy".
+
+Optional properties:
+- local-mac-address: See ethernet.txt in the same directory.
+- max-frame-size: See ethernet.txt in the same directory.
+
+Example:
+
+	tse_sub_0_eth_tse_0: ethernet@0x1,00000000 {
+		compatible = "altr,tse-msgdma-1.0";
+		reg =	<0x00000001 0x00000000 0x00000400>,
+			<0x00000001 0x00000460 0x00000020>,
+			<0x00000001 0x00000480 0x00000020>,
+			<0x00000001 0x000004A0 0x00000008>,
+			<0x00000001 0x00000400 0x00000020>,
+			<0x00000001 0x00000420 0x00000020>;
+		reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+		interrupt-parent = <&hps_0_arm_gic_0>;
+		interrupts = <0 41 4>, <0 40 4>;
+		interrupt-names = "rx_irq", "tx_irq";
+		rx-fifo-depth = <2048>;
+		tx-fifo-depth = <2048>;
+		address-bits = <48>;
+		max-frame-size = <1500>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+		phy-mode = "gmii";
+		altr,has-supplementary-unicast;
+		altr,has-hash-multicast-filter;
+		phy-handle = <&phy0>;
+		mdio {
+			compatible = "altr,tse-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: ethernet-phy@0 {
+				reg = <0x0>;
+				device_type = "ethernet-phy";
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+
+		};
+	};
+
+	tse_sub_1_eth_tse_0: ethernet@0x1,00001000 {
+		compatible = "altr,tse-msgdma-1.0";
+		reg = 	<0x00000001 0x00001000 0x00000400>,
+			<0x00000001 0x00001460 0x00000020>,
+			<0x00000001 0x00001480 0x00000020>,
+			<0x00000001 0x000014A0 0x00000008>,
+			<0x00000001 0x00001400 0x00000020>,
+			<0x00000001 0x00001420 0x00000020>;
+		reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+		interrupt-parent = <&hps_0_arm_gic_0>;
+		interrupts = <0 43 4>, <0 42 4>;
+		interrupt-names = "rx_irq", "tx_irq";
+		rx-fifo-depth = <2048>;
+		tx-fifo-depth = <2048>;
+		address-bits = <48>;
+		max-frame-size = <1500>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+		phy-mode = "gmii";
+		altr,has-supplementary-unicast;
+		altr,has-hash-multicast-filter;
+		phy-handle = <&phy1>;
+	};
diff --git a/Bindings/net/amd-xgbe-phy.txt b/Bindings/net/amd-xgbe-phy.txt
new file mode 100644
index 000000000000..42409bfe04c4
--- /dev/null
+++ b/Bindings/net/amd-xgbe-phy.txt
@@ -0,0 +1,23 @@
+* AMD 10GbE PHY driver (amd-xgbe-phy)
+
+Required properties:
+- compatible: Should be "amd,xgbe-phy-seattle-v1a" and
+  "ethernet-phy-ieee802.3-c45"
+- reg: Address and length of the register sets for the device
+   - SerDes Rx/Tx registers
+   - SerDes integration registers (1/2)
+   - SerDes integration registers (2/2)
+
+Optional properties:
+- amd,speed-set: Speed capabilities of the device
+    0 - 1GbE and 10GbE (default)
+    1 - 2.5GbE and 10GbE
+
+Example:
+	xgbe_phy@e1240800 {
+		compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
+		reg = <0 0xe1240800 0 0x00400>,
+		      <0 0xe1250000 0 0x00060>,
+		      <0 0xe1250080 0 0x00004>;
+		amd,speed-set = <0>;
+	};
diff --git a/Bindings/net/amd-xgbe.txt b/Bindings/net/amd-xgbe.txt
new file mode 100644
index 000000000000..41354f730beb
--- /dev/null
+++ b/Bindings/net/amd-xgbe.txt
@@ -0,0 +1,39 @@
+* AMD 10GbE driver (amd-xgbe)
+
+Required properties:
+- compatible: Should be "amd,xgbe-seattle-v1a"
+- reg: Address and length of the register sets for the device
+   - MAC registers
+   - PCS registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the amd-xgbe interrupt
+- clocks:
+   - DMA clock for the amd-xgbe device (used for calculating the
+     correct Rx interrupt watchdog timer value on a DMA channel
+     for coalescing)
+   - PTP clock for the amd-xgbe device
+- clock-names: Should be the names of the clocks
+   - "dma_clk" for the DMA clock
+   - "ptp_clk" for the PTP clock
+- phy-handle: See ethernet.txt file in the same directory
+- phy-mode: See ethernet.txt file in the same directory
+
+Optional properties:
+- mac-address: mac address to be assigned to the device. Can be overridden
+  by UEFI.
+- dma-coherent: Present if dma operations are coherent
+
+Example:
+	xgbe@e0700000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0700000 0 0x80000>,
+		      <0 0xe0780000 0 0x80000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 325 4>;
+		clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-handle = <&phy>;
+		phy-mode = "xgmii";
+		mac-address = [ 02 a1 a2 a3 a4 a5 ];
+	};
diff --git a/Bindings/net/apm-xgene-enet.txt b/Bindings/net/apm-xgene-enet.txt
new file mode 100644
index 000000000000..ebcad25efd0a
--- /dev/null
+++ b/Bindings/net/apm-xgene-enet.txt
@@ -0,0 +1,66 @@
+APM X-Gene SoC Ethernet nodes
+
+Ethernet nodes are defined to describe on-chip ethernet interfaces in
+APM X-Gene SoC.
+
+Required properties:
+- compatible: Should be "apm,xgene-enet"
+- reg: Address and length of the register set for the device. It contains the
+  information of registers in the same order as described by reg-names
+- reg-names: Should contain the register set names
+  - "enet_csr": Ethernet control and status register address space
+  - "ring_csr": Descriptor ring control and status register address space
+  - "ring_cmd": Descriptor ring command register address space
+- interrupts: Ethernet main interrupt
+- clocks: Reference to the clock entry.
+- local-mac-address: MAC address assigned to this device
+- phy-connection-type: Interface type between ethernet device and PHY device
+- phy-handle: Reference to a PHY node connected to this device
+
+- mdio: Device tree subnode with the following required properties:
+  - compatible: Must be "apm,xgene-mdio".
+  - #address-cells: Must be <1>.
+  - #size-cells: Must be <0>.
+
+  For the phy on the mdio bus, there must be a node with the following fields:
+  - compatible: PHY identifier.  Please refer ./phy.txt for the format.
+  - reg: The ID number for the phy.
+
+Optional properties:
+- status: Should be "ok" or "disabled" for enabled/disabled. Default is "ok".
+
+Example:
+	menetclk: menetclk {
+		compatible = "apm,xgene-device-clock";
+		clock-output-names = "menetclk";
+		status = "ok";
+	};
+
+	menet: ethernet@17020000 {
+		compatible = "apm,xgene-enet";
+		status = "disabled";
+		reg = <0x0 0x17020000 0x0 0xd100>,
+		      <0x0 0X17030000 0x0 0X400>,
+		      <0x0 0X10000000 0x0 0X200>;
+		reg-names = "enet_csr", "ring_csr", "ring_cmd";
+		interrupts = <0x0 0x3c 0x4>;
+		clocks = <&menetclk 0>;
+		local-mac-address = [00 01 73 00 00 01];
+		phy-connection-type = "rgmii";
+		phy-handle = <&menetphy>;
+		mdio {
+			compatible = "apm,xgene-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			menetphy: menetphy@3 {
+				compatible = "ethernet-phy-id001c.c915";
+				reg = <0x3>;
+			};
+
+		};
+	};
+
+/* Board-specific peripheral configurations */
+&menet {
+        status = "ok";
+};
diff --git a/Bindings/net/broadcom-bcmgenet.txt b/Bindings/net/broadcom-bcmgenet.txt
new file mode 100644
index 000000000000..451fef26b4df
--- /dev/null
+++ b/Bindings/net/broadcom-bcmgenet.txt
@@ -0,0 +1,121 @@
+* Broadcom BCM7xxx Ethernet Controller (GENET)
+
+Required properties:
+- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
+  "brcm,genet-v3", "brcm,genet-v4".
+- reg: address and length of the register set for the device
+- interrupts: must be two cells, the first cell is the general purpose
+  interrupt line, while the second cell is the interrupt for the ring
+  RX and TX queues operating in ring mode
+- phy-mode: see ethernet.txt file in the same directory
+- #address-cells: should be 1
+- #size-cells: should be 1
+
+Optional properties:
+- clocks: When provided, must be two phandles to the functional clocks nodes
+  of the GENET block. The first phandle is the main GENET clock used during
+  normal operation, while the second phandle is the Wake-on-LAN clock.
+- clock-names: When provided, names of the functional clock phandles, first
+  name should be "enet" and second should be "enet-wol".
+
+- phy-handle: See ethernet.txt file in the same directory; used to describe
+  configurations where a PHY (internal or external) is used.
+
+- fixed-link: When the GENET interface is connected to a MoCA hardware block or
+  when operating in a RGMII to RGMII type of connection, or when the MDIO bus is
+  voluntarily disabled, this property should be used to describe the "fixed link".
+  See Documentation/devicetree/bindings/net/fixed-link.txt for information on
+  the property specifics
+
+Required child nodes:
+
+- mdio bus node: this node should always be present regarless of the PHY
+  configuration of the GENET instance
+
+MDIO bus node required properties:
+
+- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2"
+  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", the version has to match the
+  parent node compatible property (e.g: brcm,genet-v4 pairs with
+  brcm,genet-mdio-v4)
+- reg: address and length relative to the parent node base register address
+- #address-cells: address cell for MDIO bus addressing, should be 1
+- #size-cells: size of the cells for MDIO bus addressing, should be 0
+
+Ethernet PHY node properties:
+
+See Documentation/devicetree/bindings/net/phy.txt for the list of required and
+optional properties.
+
+Internal Gigabit PHY example:
+
+ethernet@f0b60000 {
+	phy-mode = "internal";
+	phy-handle = <&phy1>;
+	mac-address = [ 00 10 18 36 23 1a ];
+	compatible = "brcm,genet-v4";
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	reg = <0xf0b60000 0xfc4c>;
+	interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
+
+	mdio@e14 {
+		compatible = "brcm,genet-mdio-v4";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		reg = <0xe14 0x8>;
+
+		phy1: ethernet-phy@1 {
+			max-speed = <1000>;
+			reg = <0x1>;
+			compatible = "brcm,28nm-gphy", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+MoCA interface / MAC to MAC example:
+
+ethernet@f0b80000 {
+	phy-mode = "moca";
+	fixed-link = <1 0 1000 0 0>;
+	mac-address = [ 00 10 18 36 24 1a ];
+	compatible = "brcm,genet-v4";
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	reg = <0xf0b80000 0xfc4c>;
+	interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
+
+	mdio@e14 {
+		compatible = "brcm,genet-mdio-v4";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		reg = <0xe14 0x8>;
+	};
+};
+
+
+External MDIO-connected Gigabit PHY/switch:
+
+ethernet@f0ba0000 {
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	mac-address = [ 00 10 18 36 26 1a ];
+	compatible = "brcm,genet-v4";
+	#address-cells = <0x1>;
+	#size-cells = <0x1>;
+	reg = <0xf0ba0000 0xfc4c>;
+	interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
+
+	mdio@0e14 {
+		compatible = "brcm,genet-mdio-v4";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		reg = <0xe14 0x8>;
+
+		phy0: ethernet-phy@0 {
+			max-speed = <1000>;
+			reg = <0x0>;
+			compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
diff --git a/Bindings/net/broadcom-systemport.txt b/Bindings/net/broadcom-systemport.txt
new file mode 100644
index 000000000000..aa7ad622259d
--- /dev/null
+++ b/Bindings/net/broadcom-systemport.txt
@@ -0,0 +1,30 @@
+* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+Required properties:
+- compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
+- reg: address and length of the register set for the device.
+- interrupts: interrupts for the device, first cell must be for the the rx
+  interrupts, and the second cell should be for the transmit queues. An
+  optional third interrupt cell for Wake-on-LAN can be specified
+- local-mac-address: Ethernet MAC address (48 bits) of this adapter
+- phy-mode: Should be a string describing the PHY interface to the
+  Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
+- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
+  the property specific details
+
+Optional properties:
+- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
+- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
+- systemport,num-txq: number of HW transmit queues, an integer
+- systemport,num-rxq: number of HW receive queues, an integer
+
+Example:
+ethernet@f04a0000 {
+	compatible = "brcm,systemport-v1.00";
+	reg = <0xf04a0000 0x4650>;
+	local-mac-address = [ 00 11 22 33 44 55 ];
+	fixed-link = <0 1 1000 0 0>;
+	phy-mode = "gmii";
+	interrupts = <0x0 0x16 0x0>,
+		<0x0 0x17 0x0>;
+};
diff --git a/Bindings/net/can/xilinx_can.txt b/Bindings/net/can/xilinx_can.txt
new file mode 100644
index 000000000000..fe38847d8e26
--- /dev/null
+++ b/Bindings/net/can/xilinx_can.txt
@@ -0,0 +1,44 @@
+Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
+---------------------------------------------------------
+
+Required properties:
+- compatible		: Should be "xlnx,zynq-can-1.0" for Zynq CAN
+			  controllers and "xlnx,axi-can-1.00.a" for Axi CAN
+			  controllers.
+- reg			: Physical base address and size of the Axi CAN/Zynq
+			  CANPS registers map.
+- interrupts		: Property with a value describing the interrupt
+			  number.
+- interrupt-parent	: Must be core interrupt controller
+- clock-names		: List of input clock names - "can_clk", "pclk"
+			  (For CANPS), "can_clk" , "s_axi_aclk"(For AXI CAN)
+			  (See clock bindings for details).
+- clocks		: Clock phandles (see clock bindings for details).
+- tx-fifo-depth		: Can Tx fifo depth.
+- rx-fifo-depth		: Can Rx fifo depth.
+
+
+Example:
+
+For Zynq CANPS Dts file:
+	zynq_can_0: can@e0008000 {
+			compatible = "xlnx,zynq-can-1.0";
+			clocks = <&clkc 19>, <&clkc 36>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0008000 0x1000>;
+			interrupts = <0 28 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+For Axi CAN Dts file:
+	axi_can_0: axi-can@40000000 {
+			compatible = "xlnx,axi-can-1.00.a";
+			clocks = <&clkc 0>, <&clkc 1>;
+			clock-names = "can_clk","s_axi_aclk" ;
+			reg = <0x40000000 0x10000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 59 1>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
diff --git a/Bindings/net/ethernet.txt b/Bindings/net/ethernet.txt
new file mode 100644
index 000000000000..3fc360523bc9
--- /dev/null
+++ b/Bindings/net/ethernet.txt
@@ -0,0 +1,25 @@
+The following properties are common to the Ethernet controllers:
+
+- local-mac-address: array of 6 bytes, specifies the MAC address that was
+  assigned to the network device;
+- mac-address: array of 6 bytes, specifies the MAC address that was last used by
+  the boot program; should be used in cases where the MAC address assigned to
+  the device by the boot program is different from the "local-mac-address"
+  property;
+- max-speed: number, specifies maximum speed in Mbit/s supported by the device;
+- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
+  the maximum frame size (there's contradiction in ePAPR).
+- phy-mode: string, operation mode of the PHY interface; supported values are
+  "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
+  "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto
+  standard property;
+- phy-connection-type: the same as "phy-mode" property but described in ePAPR;
+- phy-handle: phandle, specifies a reference to a node representing a PHY
+  device; this property is described in ePAPR and so preferred;
+- phy: the same as "phy-handle" property, not recommended for new bindings.
+- phy-device: the same as "phy-handle" property, not recommended for new
+  bindings.
+
+Child nodes of the Ethernet controller are typically the individual PHY devices
+connected via the MDIO bus (sometimes the MDIO bus controller is separate).
+They are described in the phy.txt file in this same directory.
diff --git a/Bindings/net/fixed-link.txt b/Bindings/net/fixed-link.txt
new file mode 100644
index 000000000000..82bf7e0f47b6
--- /dev/null
+++ b/Bindings/net/fixed-link.txt
@@ -0,0 +1,42 @@
+Fixed link Device Tree binding
+------------------------------
+
+Some Ethernet MACs have a "fixed link", and are not connected to a
+normal MDIO-managed PHY device. For those situations, a Device Tree
+binding allows to describe a "fixed link".
+
+Such a fixed link situation is described by creating a 'fixed-link'
+sub-node of the Ethernet MAC device node, with the following
+properties:
+
+* 'speed' (integer, mandatory), to indicate the link speed. Accepted
+  values are 10, 100 and 1000
+* 'full-duplex' (boolean, optional), to indicate that full duplex is
+  used. When absent, half duplex is assumed.
+* 'pause' (boolean, optional), to indicate that pause should be
+  enabled.
+* 'asym-pause' (boolean, optional), to indicate that asym_pause should
+  be enabled.
+
+Old, deprecated 'fixed-link' binding:
+
+* A 'fixed-link' property in the Ethernet MAC node, with 5 cells, of the
+  form <a b c d e> with the following accepted values:
+  - a: emulated PHY ID, choose any but but unique to the all specified
+    fixed-links, from 0 to 31
+  - b: duplex configuration: 0 for half duplex, 1 for full duplex
+  - c: link speed in Mbits/sec, accepted values are: 10, 100 and 1000
+  - d: pause configuration: 0 for no pause, 1 for pause
+  - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for
+    asymmetric pause
+
+Example:
+
+ethernet@0 {
+	...
+	fixed-link {
+	      speed = <1000>;
+	      full-duplex;
+	};
+	...
+};
diff --git a/Bindings/net/hisilicon-hix5hd2-gmac.txt b/Bindings/net/hisilicon-hix5hd2-gmac.txt
new file mode 100644
index 000000000000..75d398bb1fbb
--- /dev/null
+++ b/Bindings/net/hisilicon-hix5hd2-gmac.txt
@@ -0,0 +1,36 @@
+Hisilicon hix5hd2 gmac controller
+
+Required properties:
+- compatible: should be "hisilicon,hix5hd2-gmac".
+- reg: specifies base physical address(s) and size of the device registers.
+  The first region is the MAC register base and size.
+  The second region is external interface control register.
+- interrupts: should contain the MAC interrupt.
+- #address-cells: must be <1>.
+- #size-cells: must be <0>.
+- phy-mode: see ethernet.txt [1].
+- phy-handle: see ethernet.txt [1].
+- mac-address: see ethernet.txt [1].
+- clocks: clock phandle and specifier pair.
+
+- PHY subnode: inherits from phy binding [2]
+
+[1] Documentation/devicetree/bindings/net/ethernet.txt
+[2] Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+	gmac0: ethernet@f9840000 {
+		compatible = "hisilicon,hix5hd2-gmac";
+		reg = <0xf9840000 0x1000>,<0xf984300c 0x4>;
+		interrupts = <0 71 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy-mode = "mii";
+		phy-handle = <&phy2>;
+		mac-address = [00 00 00 00 00 00];
+		clocks = <&clock HIX5HD2_MAC0_CLK>;
+
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
diff --git a/Bindings/net/ieee802154/at86rf230.txt b/Bindings/net/ieee802154/at86rf230.txt
new file mode 100644
index 000000000000..d3bbdded4cbe
--- /dev/null
+++ b/Bindings/net/ieee802154/at86rf230.txt
@@ -0,0 +1,23 @@
+* AT86RF230 IEEE 802.15.4 *
+
+Required properties:
+  - compatible:		should be "atmel,at86rf230", "atmel,at86rf231",
+			"atmel,at86rf233" or "atmel,at86rf212"
+  - spi-max-frequency:	maximal bus speed, should be set to 7500000 depends
+			sync or async operation mode
+  - reg:		the chipselect index
+  - interrupts:		the interrupt generated by the device
+
+Optional properties:
+  - reset-gpio:		GPIO spec for the rstn pin
+  - sleep-gpio:		GPIO spec for the slp_tr pin
+
+Example:
+
+	at86rf231@0 {
+		compatible = "atmel,at86rf231";
+		spi-max-frequency = <7500000>;
+		reg = <0>;
+		interrupts = <19 1>;
+		interrupt-parent = <&gpio3>;
+	};
diff --git a/Bindings/net/ieee802154/cc2520.txt b/Bindings/net/ieee802154/cc2520.txt
new file mode 100644
index 000000000000..0071883c08d8
--- /dev/null
+++ b/Bindings/net/ieee802154/cc2520.txt
@@ -0,0 +1,29 @@
+*CC2520 IEEE 802.15.4 Compatible Radio*
+
+Required properties:
+	- compatible: 		should be "ti,cc2520"
+	- spi-max-frequency:	maximal bus speed (8000000), should be set to 4000000 depends
+				sync or async operation mode
+	- reg:			the chipselect index
+	- pinctrl-0: 		pin control group to be used for this controller.
+	- pinctrl-names: 	must contain a "default" entry.
+	- fifo-gpio:		GPIO spec for the FIFO pin
+	- fifop-gpio:		GPIO spec for the FIFOP pin
+	- sfd-gpio:		GPIO spec for the SFD pin
+	- cca-gpio:		GPIO spec for the CCA pin
+	- vreg-gpio:		GPIO spec for the VREG pin
+	- reset-gpio:		GPIO spec for the RESET pin
+Example:
+	cc2520@0 {
+		compatible = "ti,cc2520";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cc2520_cape_pins>;
+		fifo-gpio = <&gpio1 18 0>;
+		fifop-gpio = <&gpio1 19 0>;
+		sfd-gpio = <&gpio1 13 0>;
+		cca-gpio = <&gpio1 16 0>;
+		vreg-gpio = <&gpio0 31 0>;
+		reset-gpio = <&gpio1 12 0>;
+	};
diff --git a/Bindings/net/marvell-pp2.txt b/Bindings/net/marvell-pp2.txt
new file mode 100644
index 000000000000..aa4f4230bfd7
--- /dev/null
+++ b/Bindings/net/marvell-pp2.txt
@@ -0,0 +1,61 @@
+* Marvell Armada 375 Ethernet Controller (PPv2)
+
+Required properties:
+
+- compatible: should be "marvell,armada-375-pp2"
+- reg: addresses and length of the register sets for the device.
+  Must contain the following register sets:
+	- common controller registers
+	- LMS registers
+  In addition, at least one port register set is required.
+- clocks: a pointer to the reference clocks for this device, consequently:
+	- main controller clock
+	- GOP clock
+- clock-names: names of used clocks, must be "pp_clk" and "gop_clk".
+
+The ethernet ports are represented by subnodes. At least one port is
+required.
+
+Required properties (port):
+
+- interrupts: interrupt for the port
+- port-id: should be '0' or '1' for ethernet ports, and '2' for the
+           loopback port
+- phy-mode: See ethernet.txt file in the same directory
+
+Optional properties (port):
+
+- marvell,loopback: port is loopback mode
+- phy: a phandle to a phy node defining the PHY address (as the reg
+  property, a single integer). Note: if this property isn't present,
+  then fixed link is assumed, and the 'fixed-link' property is
+  mandatory.
+
+Example:
+
+ethernet@f0000 {
+	compatible = "marvell,armada-375-pp2";
+	reg = <0xf0000 0xa000>,
+	      <0xc0000 0x3060>,
+	      <0xc4000 0x100>,
+	      <0xc5000 0x100>;
+	clocks = <&gateclk 3>, <&gateclk 19>;
+	clock-names = "pp_clk", "gop_clk";
+	status = "okay";
+
+	eth0: eth0@c4000 {
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		port-id = <0>;
+		status = "okay";
+		phy = <&phy0>;
+		phy-mode = "gmii";
+	};
+
+	eth1: eth1@c5000 {
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		port-id = <1>;
+		status = "okay";
+		phy = <&phy3>;
+		phy-mode = "gmii";
+	};
+};
diff --git a/Bindings/net/micrel-ksz90x1.txt b/Bindings/net/micrel-ksz90x1.txt
new file mode 100644
index 000000000000..692076fda0e5
--- /dev/null
+++ b/Bindings/net/micrel-ksz90x1.txt
@@ -0,0 +1,83 @@
+Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY
+
+Some boards require special tuning values, particularly when it comes to
+clock delays. You can specify clock delay values by adding
+micrel-specific properties to an Ethernet OF device node.
+
+Note that these settings are applied after any phy-specific fixup from
+phy_fixup_list (see phy_init_hw() from drivers/net/phy/phy_device.c),
+and therefore may overwrite them.
+
+KSZ9021:
+
+  All skew control options are specified in picoseconds. The minimum
+  value is 0, the maximum value is 3000, and it is incremented by 200ps
+  steps.
+
+  Optional properties:
+
+    - rxc-skew-ps : Skew control of RXC pad
+    - rxdv-skew-ps : Skew control of RX CTL pad
+    - txc-skew-ps : Skew control of TXC pad
+    - txen-skew-ps : Skew control of TX CTL pad
+    - rxd0-skew-ps : Skew control of RX data 0 pad
+    - rxd1-skew-ps : Skew control of RX data 1 pad
+    - rxd2-skew-ps : Skew control of RX data 2 pad
+    - rxd3-skew-ps : Skew control of RX data 3 pad
+    - txd0-skew-ps : Skew control of TX data 0 pad
+    - txd1-skew-ps : Skew control of TX data 1 pad
+    - txd2-skew-ps : Skew control of TX data 2 pad
+    - txd3-skew-ps : Skew control of TX data 3 pad
+
+KSZ9031:
+
+  All skew control options are specified in picoseconds. The minimum
+  value is 0, and the maximum is property-dependent. The increment
+  step is 60ps.
+
+  Optional properties:
+
+    Maximum value of 1860:
+
+      - rxc-skew-ps : Skew control of RX clock pad
+      - txc-skew-ps : Skew control of TX clock pad
+
+    Maximum value of 900:
+
+      - rxdv-skew-ps : Skew control of RX CTL pad
+      - txen-skew-ps : Skew control of TX CTL pad
+      - rxd0-skew-ps : Skew control of RX data 0 pad
+      - rxd1-skew-ps : Skew control of RX data 1 pad
+      - rxd2-skew-ps : Skew control of RX data 2 pad
+      - rxd3-skew-ps : Skew control of RX data 3 pad
+      - txd0-skew-ps : Skew control of TX data 0 pad
+      - txd1-skew-ps : Skew control of TX data 1 pad
+      - txd2-skew-ps : Skew control of TX data 2 pad
+      - txd3-skew-ps : Skew control of TX data 3 pad
+
+Examples:
+
+	/* Attach to an Ethernet device with autodetected PHY */
+	&enet {
+		rxc-skew-ps = <3000>;
+		rxdv-skew-ps = <0>;
+		txc-skew-ps = <3000>;
+		txen-skew-ps = <0>;
+		status = "okay";
+	};
+
+	/* Attach to an explicitly-specified PHY */
+	mdio {
+		phy0: ethernet-phy@0 {
+			rxc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			reg = <0>;
+		};
+	};
+	ethernet@70000 {
+		status = "okay";
+		phy = <&phy0>;
+		phy-mode = "rgmii-id";
+	};
diff --git a/Bindings/net/micrel.txt b/Bindings/net/micrel.txt
new file mode 100644
index 000000000000..98a3e61f9ee8
--- /dev/null
+++ b/Bindings/net/micrel.txt
@@ -0,0 +1,18 @@
+Micrel PHY properties.
+
+These properties cover the base properties Micrel PHYs.
+
+Optional properties:
+
+ - micrel,led-mode : LED mode value to set for PHYs with configurable LEDs.
+
+              Configure the LED mode with single value. The list of PHYs and
+	      the bits that are currently supported:
+
+	      KSZ8001: register 0x1e, bits 15..14
+	      KSZ8041: register 0x1e, bits 15..14
+	      KSZ8021: register 0x1f, bits 5..4
+	      KSZ8031: register 0x1f, bits 5..4
+	      KSZ8051: register 0x1f, bits 5..4
+
+              See the respective PHY datasheet for the mode values.
diff --git a/Bindings/net/nfc/pn544.txt b/Bindings/net/nfc/pn544.txt
new file mode 100644
index 000000000000..dab69f36167c
--- /dev/null
+++ b/Bindings/net/nfc/pn544.txt
@@ -0,0 +1,35 @@
+* NXP Semiconductors PN544 NFC Controller
+
+Required properties:
+- compatible: Should be "nxp,pn544-i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
+- firmware-gpios: Output GPIO pin used to enter firmware download mode
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBone with PN544 on I2C2):
+
+&i2c2 {
+
+	status = "okay";
+
+	pn544: pn544@28 {
+
+		compatible = "nxp,pn544-i2c";
+
+		reg = <0x28>;
+		clock-frequency = <400000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 GPIO_ACTIVE_HIGH>;
+
+		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/Bindings/net/nfc/st21nfca.txt b/Bindings/net/nfc/st21nfca.txt
new file mode 100644
index 000000000000..e4faa2e8dfeb
--- /dev/null
+++ b/Bindings/net/nfc/st21nfca.txt
@@ -0,0 +1,33 @@
+* STMicroelectronics SAS. ST21NFCA NFC Controller
+
+Required properties:
+- compatible: Should be "st,st21nfca_i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
+
+&i2c2 {
+
+	status = "okay";
+
+	st21nfca: st21nfca@1 {
+
+		compatible = "st,st21nfca_i2c";
+
+		reg = <0x01>;
+		clock-frequency = <400000>;
+
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/Bindings/net/nfc/st21nfcb.txt b/Bindings/net/nfc/st21nfcb.txt
new file mode 100644
index 000000000000..3b58ae480344
--- /dev/null
+++ b/Bindings/net/nfc/st21nfcb.txt
@@ -0,0 +1,33 @@
+* STMicroelectronics SAS. ST21NFCB NFC Controller
+
+Required properties:
+- compatible: Should be "st,st21nfcb_i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- reset-gpios: Output GPIO pin used to reset the ST21NFCB
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
+
+&i2c2 {
+
+	status = "okay";
+
+	st21nfcb: st21nfcb@8 {
+
+		compatible = "st,st21nfcb_i2c";
+
+		reg = <0x08>;
+		clock-frequency = <400000>;
+
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/Bindings/net/nfc/trf7970a.txt b/Bindings/net/nfc/trf7970a.txt
new file mode 100644
index 000000000000..1e436133685f
--- /dev/null
+++ b/Bindings/net/nfc/trf7970a.txt
@@ -0,0 +1,36 @@
+* Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
+
+Required properties:
+- compatible: Should be "ti,trf7970a".
+- spi-max-frequency: Maximum SPI frequency (<= 2000000).
+- interrupt-parent: phandle of parent interrupt handler.
+- interrupts: A single interrupt specifier.
+- ti,enable-gpios: Two GPIO entries used for 'EN' and 'EN2' pins on the
+  TRF7970A.
+- vin-supply: Regulator for supply voltage to VIN pin
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+- autosuspend-delay: Specify autosuspend delay in milliseconds.
+
+Example (for ARM-based BeagleBone with TRF7970A on SPI1):
+
+&spi1 {
+	status = "okay";
+
+	nfc@0 {
+		compatible = "ti,trf7970a";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trf7970a_default>;
+		spi-max-frequency = <2000000>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 0>;
+		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
+				  <&gpio2 5 GPIO_ACTIVE_LOW>;
+		vin-supply = <&ldo3_reg>;
+		autosuspend-delay = <30000>;
+		status = "okay";
+	};
+};
diff --git a/Bindings/net/opencores-ethoc.txt b/Bindings/net/opencores-ethoc.txt
new file mode 100644
index 000000000000..2dc127c30d9b
--- /dev/null
+++ b/Bindings/net/opencores-ethoc.txt
@@ -0,0 +1,22 @@
+* OpenCores MAC 10/100 Mbps
+
+Required properties:
+- compatible: Should be "opencores,ethoc".
+- reg: two memory regions (address and length),
+  first region is for the device registers and descriptor rings,
+  second is for the device packet memory.
+- interrupts: interrupt for the device.
+
+Optional properties:
+- clocks: phandle to refer to the clk used as per
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Examples:
+
+	enet0: ethoc@fd030000 {
+		compatible = "opencores,ethoc";
+		reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
+		interrupts = <1>;
+		local-mac-address = [00 50 c2 13 6f 00];
+		clocks = <&osc>;
+        };
diff --git a/Bindings/net/samsung-sxgbe.txt b/Bindings/net/samsung-sxgbe.txt
new file mode 100644
index 000000000000..989f6c95cfd5
--- /dev/null
+++ b/Bindings/net/samsung-sxgbe.txt
@@ -0,0 +1,52 @@
+* Samsung 10G Ethernet driver (SXGBE)
+
+Required properties:
+- compatible: Should be "samsung,sxgbe-v2.0a"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the SXGBE interrupts
+  These interrupts are ordered by fixed and follows variable
+  trasmit DMA interrupts, receive DMA interrupts and lpi interrupt.
+  index 0 - this is fixed common interrupt of SXGBE and it is always
+  available.
+  index 1 to 25 - 8 variable trasmit interrupts, variable 16 receive interrupts
+  and 1 optional lpi interrupt.
+- phy-mode: String, operation mode of the PHY interface.
+  Supported values are: "sgmii", "xgmii".
+- samsung,pbl: Integer, Programmable Burst Length.
+  Supported values are 1, 2, 4, 8, 16, or 32.
+- samsung,burst-map: Integer, Program the possible bursts supported by sxgbe
+  This is an interger and represents allowable DMA bursts when fixed burst.
+  Allowable range is 0x01-0x3F. When this field is set fixed burst is enabled.
+  When fixed length is needed for burst mode, it can be set within allowable
+  range.
+
+Optional properties:
+- mac-address: 6 bytes, mac address
+- max-frame-size: Maximum Transfer Unit (IEEE defined MTU), rather
+		  than the maximum frame size.
+
+Example:
+
+	aliases {
+		ethernet0 = <&sxgbe0>;
+	};
+
+	sxgbe0: ethernet@1a040000 {
+		compatible = "samsung,sxgbe-v2.0a";
+		reg = <0 0x1a040000 0 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 209 4>, <0 185 4>, <0 186 4>, <0 187 4>,
+			     <0 188 4>, <0 189 4>, <0 190 4>, <0 191 4>,
+			     <0 192 4>, <0 193 4>, <0 194 4>, <0 195 4>,
+			     <0 196 4>, <0 197 4>, <0 198 4>, <0 199 4>,
+			     <0 200 4>, <0 201 4>, <0 202 4>, <0 203 4>,
+			     <0 204 4>, <0 205 4>, <0 206 4>, <0 207 4>,
+			     <0 208 4>, <0 210 4>;
+		samsung,pbl = <0x08>
+		samsung,burst-map = <0x20>
+		mac-address = [ 00 11 22 33 44 55 ]; /* Filled in by U-Boot */
+		max-frame-size = <9000>;
+		phy-mode = "xgmii";
+	};
diff --git a/Bindings/net/sh_eth.txt b/Bindings/net/sh_eth.txt
new file mode 100644
index 000000000000..34d4db1a4e25
--- /dev/null
+++ b/Bindings/net/sh_eth.txt
@@ -0,0 +1,56 @@
+* Renesas Electronics SH EtherMAC
+
+This file provides information on what the device node for the SH EtherMAC
+interface contains.
+
+Required properties:
+- compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC.
+	      "renesas,ether-r8a7778"  if the device is a part of R8A7778 SoC.
+	      "renesas,ether-r8a7779"  if the device is a part of R8A7779 SoC.
+	      "renesas,ether-r8a7790"  if the device is a part of R8A7790 SoC.
+	      "renesas,ether-r8a7791"  if the device is a part of R8A7791 SoC.
+	      "renesas,ether-r8a7794"  if the device is a part of R8A7794 SoC.
+	      "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
+- reg: offset and length of (1) the E-DMAC/feLic register block (required),
+       (2) the TSU register block (optional).
+- interrupts: interrupt specifier for the sole interrupt.
+- phy-mode: see ethernet.txt file in the same directory.
+- phy-handle: see ethernet.txt file in the same directory.
+- #address-cells: number of address cells for the MDIO bus, must be equal to 1.
+- #size-cells: number of size cells on the MDIO bus, must be equal to 0.
+- clocks: clock phandle and specifier pair.
+- pinctrl-0: phandle, referring to a default pin configuration node.
+
+Optional properties:
+- interrupt-parent: the phandle for the interrupt controller that services
+		    interrupts for this device.
+- pinctrl-names: pin configuration state name ("default").
+- renesas,no-ether-link: boolean, specify when a board does not provide a proper
+			 Ether LINK signal.
+- renesas,ether-link-active-low: boolean, specify when the Ether LINK signal is
+				 active-low instead of normal active-high.
+
+Example (Lager board):
+
+	ethernet@ee700000 {
+		compatible = "renesas,ether-r8a7790";
+		reg = <0 0xee700000 0 0x400>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+		phy-mode = "rmii";
+		phy-handle = <&phy1>;
+		pinctrl-0 = <&ether_pins>;
+		pinctrl-names = "default";
+		renesas,ether-link-active-low;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+			interrupt-parent = <&irqc0>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&phy1_pins>;
+			pinctrl-names = "default";
+		};
+	};
diff --git a/Bindings/net/socfpga-dwmac.txt b/Bindings/net/socfpga-dwmac.txt
new file mode 100644
index 000000000000..2a60cd3e8d5d
--- /dev/null
+++ b/Bindings/net/socfpga-dwmac.txt
@@ -0,0 +1,27 @@
+Altera SOCFPGA SoC DWMAC controller
+
+This is a variant of the dwmac/stmmac driver an inherits all descriptions
+present in Documentation/devicetree/bindings/net/stmmac.txt.
+
+The device node has additional properties:
+
+Required properties:
+ - compatible	: Should contain "altr,socfpga-stmmac" along with
+		  "snps,dwmac" and any applicable more detailed
+		  designware version numbers documented in stmmac.txt
+ - altr,sysmgr-syscon : Should be the phandle to the system manager node that
+   encompasses the glue register, the register offset, and the register shift.
+
+Example:
+
+gmac0: ethernet@ff700000 {
+	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+	altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+	status = "disabled";
+	reg = <0xff700000 0x2000>;
+	interrupts = <0 115 4>;
+	interrupt-names = "macirq";
+	mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+	clocks = <&emac_0_clk>;
+	clock-names = "stmmaceth";
+};
diff --git a/Bindings/net/via-rhine.txt b/Bindings/net/via-rhine.txt
new file mode 100644
index 000000000000..334eca2bf937
--- /dev/null
+++ b/Bindings/net/via-rhine.txt
@@ -0,0 +1,17 @@
+* VIA Rhine 10/100 Network Controller
+
+Required properties:
+- compatible : Should be "via,vt8500-rhine" for integrated
+	Rhine controllers found in VIA VT8500, WonderMedia WM8950
+	and similar. These are listed as 1106:3106 rev. 0x84 on the
+	virtual PCI bus under vendor-provided kernels
+- reg : Address and length of the io space
+- interrupts : Should contain the controller interrupt line
+
+Examples:
+
+ethernet@d8004000 {
+	compatible = "via,vt8500-rhine";
+	reg = <0xd8004000 0x100>;
+	interrupts = <10>;
+};
diff --git a/Bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Bindings/net/wireless/brcm,bcm43xx-fmac.txt
new file mode 100644
index 000000000000..5dbf169cd81c
--- /dev/null
+++ b/Bindings/net/wireless/brcm,bcm43xx-fmac.txt
@@ -0,0 +1,41 @@
+Broadcom BCM43xx Fullmac wireless SDIO devices
+
+This node provides properties for controlling the Broadcom wireless device. The
+node is expected to be specified as a child node to the SDIO controller that
+connects the device to the system.
+
+Required properties:
+
+ - compatible : Should be "brcm,bcm4329-fmac".
+
+Optional properties:
+ - brcm,drive-strength : drive strength used for SDIO pins on device in mA
+	(default = 6).
+ - interrupt-parent : the phandle for the interrupt controller to which the
+	device interrupts are connected.
+ - interrupts : specifies attributes for the out-of-band interrupt (host-wake).
+	When not specified the device will use in-band SDIO interrupts.
+ - interrupt-names : name of the out-of-band interrupt, which must be set
+	to "host-wake".
+
+Example:
+
+mmc3: mmc@01c12000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <10 8>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/Bindings/net/wireless/ti,wl1251.txt b/Bindings/net/wireless/ti,wl1251.txt
new file mode 100644
index 000000000000..189ae5cad8f7
--- /dev/null
+++ b/Bindings/net/wireless/ti,wl1251.txt
@@ -0,0 +1,39 @@
+* Texas Instruments wl1251 wireless lan controller
+
+The wl1251 chip can be connected via SPI or via SDIO. This
+document describes the binding for the SPI connected chip.
+
+Required properties:
+- compatible :        Should be "ti,wl1251"
+- reg :               Chip select address of device
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz
+- interrupts :        Should contain interrupt line
+- interrupt-parent :  Should be the phandle for the interrupt controller
+                      that services interrupts for this device
+- vio-supply :        phandle to regulator providing VIO
+- ti,power-gpio :     GPIO connected to chip's PMEN pin
+
+Optional properties:
+- ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
+                         provides configuration data (calibration, MAC, ...)
+- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
+  for optional SPI connection related properties,
+
+Examples:
+
+&spi1 {
+	wl1251@0 {
+		compatible = "ti,wl1251";
+
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+		spi-cpol;
+		spi-cpha;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+
+		vio-supply = <&vio>;
+		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+	};
+};
diff --git a/Bindings/panel/auo,b133htn01.txt b/Bindings/panel/auo,b133htn01.txt
new file mode 100644
index 000000000000..302226b5bb55
--- /dev/null
+++ b/Bindings/panel/auo,b133htn01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+
+Required properties:
+- compatible: should be "auo,b133htn01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/auo,b133xtn01.txt b/Bindings/panel/auo,b133xtn01.txt
new file mode 100644
index 000000000000..7443b7c76769
--- /dev/null
+++ b/Bindings/panel/auo,b133xtn01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b133xtn01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/edt,et057090dhu.txt b/Bindings/panel/edt,et057090dhu.txt
new file mode 100644
index 000000000000..4903d7b1d947
--- /dev/null
+++ b/Bindings/panel/edt,et057090dhu.txt
@@ -0,0 +1,7 @@
+Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+
+Required properties:
+- compatible: should be "edt,et057090dhu"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/edt,et070080dh6.txt b/Bindings/panel/edt,et070080dh6.txt
new file mode 100644
index 000000000000..20cb38e836e4
--- /dev/null
+++ b/Bindings/panel/edt,et070080dh6.txt
@@ -0,0 +1,10 @@
+Emerging Display Technology Corp. ET070080DH6 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "edt,et070080dh6"
+
+This panel is the same as ETM0700G0DH6 except for the touchscreen.
+ET070080DH6 is the model with resistive touch.
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/edt,etm0700g0dh6.txt b/Bindings/panel/edt,etm0700g0dh6.txt
new file mode 100644
index 000000000000..ee4b18053e40
--- /dev/null
+++ b/Bindings/panel/edt,etm0700g0dh6.txt
@@ -0,0 +1,10 @@
+Emerging Display Technology Corp. ETM0700G0DH6 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "edt,etm0700g0dh6"
+
+This panel is the same as ET070080DH6 except for the touchscreen.
+ETM0700G0DH6 is the model with capacitive multitouch.
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/foxlink,fl500wvr00-a0t.txt b/Bindings/panel/foxlink,fl500wvr00-a0t.txt
new file mode 100644
index 000000000000..b47f9d87bc19
--- /dev/null
+++ b/Bindings/panel/foxlink,fl500wvr00-a0t.txt
@@ -0,0 +1,7 @@
+Foxlink Group 5" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "foxlink,fl500wvr00-a0t"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/innolux,n116bge.txt b/Bindings/panel/innolux,n116bge.txt
new file mode 100644
index 000000000000..081bb939ed31
--- /dev/null
+++ b/Bindings/panel/innolux,n116bge.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,n116bge"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/innolux,n156bge-l21.txt b/Bindings/panel/innolux,n156bge-l21.txt
new file mode 100644
index 000000000000..7825844aafdf
--- /dev/null
+++ b/Bindings/panel/innolux,n156bge-l21.txt
@@ -0,0 +1,7 @@
+InnoLux 15.6" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,n156bge-l21"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/lg,ld070wx3-sl01.txt b/Bindings/panel/lg,ld070wx3-sl01.txt
new file mode 100644
index 000000000000..5e649cb9aa1a
--- /dev/null
+++ b/Bindings/panel/lg,ld070wx3-sl01.txt
@@ -0,0 +1,7 @@
+LG Corporation 7" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,ld070wx3-sl01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/lg,lh500wx1-sd03.txt b/Bindings/panel/lg,lh500wx1-sd03.txt
new file mode 100644
index 000000000000..a04fd2b2e73d
--- /dev/null
+++ b/Bindings/panel/lg,lh500wx1-sd03.txt
@@ -0,0 +1,7 @@
+LG Corporation 5" HD TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,lh500wx1-sd03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/lg,lp129qe.txt b/Bindings/panel/lg,lp129qe.txt
new file mode 100644
index 000000000000..9f262e0c5a2e
--- /dev/null
+++ b/Bindings/panel/lg,lp129qe.txt
@@ -0,0 +1,7 @@
+LG 12.9" (2560x1700 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,lp129qe"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/samsung,ld9040.txt b/Bindings/panel/samsung,ld9040.txt
new file mode 100644
index 000000000000..07c36c3f7b52
--- /dev/null
+++ b/Bindings/panel/samsung,ld9040.txt
@@ -0,0 +1,66 @@
+Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
+
+Required properties:
+  - compatible: "samsung,ld9040"
+  - reg: address of the panel on SPI bus
+  - vdd3-supply: core voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin
+  - display-timings: timings for the connected panel according to [1]
+
+The panel must obey rules for SPI slave device specified in document [2].
+
+Optional properties:
+  - power-on-delay: delay after turning regulators on [ms]
+  - reset-delay: delay after reset sequence [ms]
+  - panel-width-mm: physical panel width [mm]
+  - panel-height-mm: physical panel height [mm]
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [3]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
+[3]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	lcd@0 {
+		compatible = "samsung,ld9040";
+		reg = <0>;
+		vdd3-supply = <&ldo7_reg>;
+		vci-supply = <&ldo17_reg>;
+		reset-gpios = <&gpy4 5 0>;
+		spi-max-frequency = <1200000>;
+		spi-cpol;
+		spi-cpha;
+		power-on-delay = <10>;
+		reset-delay = <10>;
+		panel-width-mm = <90>;
+		panel-height-mm = <154>;
+
+		display-timings {
+			timing {
+				clock-frequency = <23492370>;
+				hactive = <480>;
+				vactive = <800>;
+				hback-porch = <16>;
+				hfront-porch = <16>;
+				vback-porch = <2>;
+				vfront-porch = <28>;
+				hsync-len = <2>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <0>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			lcd_ep: endpoint {
+				remote-endpoint = <&fimd_dpi_ep>;
+			};
+		};
+	};
diff --git a/Bindings/panel/samsung,s6e8aa0.txt b/Bindings/panel/samsung,s6e8aa0.txt
new file mode 100644
index 000000000000..e7ee988e3156
--- /dev/null
+++ b/Bindings/panel/samsung,s6e8aa0.txt
@@ -0,0 +1,56 @@
+Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
+
+Required properties:
+  - compatible: "samsung,s6e8aa0"
+  - reg: the virtual channel number of a DSI peripheral
+  - vdd3-supply: core voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin
+  - display-timings: timings for the connected panel as described by [1]
+
+Optional properties:
+  - power-on-delay: delay after turning regulators on [ms]
+  - reset-delay: delay after reset sequence [ms]
+  - init-delay: delay after initialization sequence [ms]
+  - panel-width-mm: physical panel width [mm]
+  - panel-height-mm: physical panel height [mm]
+  - flip-horizontal: boolean to flip image horizontally
+  - flip-vertical: boolean to flip image vertically
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [2]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	panel {
+		compatible = "samsung,s6e8aa0";
+		reg = <0>;
+		vdd3-supply = <&vcclcd_reg>;
+		vci-supply = <&vlcd_reg>;
+		reset-gpios = <&gpy4 5 0>;
+		power-on-delay= <50>;
+		reset-delay = <100>;
+		init-delay = <100>;
+		panel-width-mm = <58>;
+		panel-height-mm = <103>;
+		flip-horizontal;
+		flip-vertical;
+
+		display-timings {
+			timing0: timing-0 {
+				clock-frequency = <57153600>;
+				hactive = <720>;
+				vactive = <1280>;
+				hfront-porch = <5>;
+				hback-porch = <5>;
+				hsync-len = <5>;
+				vfront-porch = <13>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+	};
diff --git a/Bindings/pci/fsl,imx6q-pcie.txt b/Bindings/pci/fsl,imx6q-pcie.txt
new file mode 100644
index 000000000000..9455fd0ec830
--- /dev/null
+++ b/Bindings/pci/fsl,imx6q-pcie.txt
@@ -0,0 +1,38 @@
+* Freescale i.MX6 PCIe interface
+
+This PCIe host controller is based on the Synopsis Designware PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: "fsl,imx6q-pcie"
+- reg: base addresse and length of the pcie controller
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+	- "msi": The interrupt that is asserted when an MSI is received
+- clock-names: Must include the following additional entries:
+	- "pcie_phy"
+
+Example:
+
+	pcie@0x01000000 {
+		compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+		reg = <0x01ffc000 0x4000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000
+			  0x81000000 0 0          0x01f80000 0 0x00010000
+			  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+		                <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks 144>, <&clks 206>, <&clks 189>;
+		clock-names = "pcie", "pcie_bus", "pcie_phy";
+	};
diff --git a/Bindings/pci/host-generic-pci.txt b/Bindings/pci/host-generic-pci.txt
new file mode 100644
index 000000000000..f0b0436807b4
--- /dev/null
+++ b/Bindings/pci/host-generic-pci.txt
@@ -0,0 +1,100 @@
+* Generic PCI host controller
+
+Firmware-initialised PCI host controllers and PCI emulations, such as the
+virtio-pci implementations found in kvmtool and other para-virtualised
+systems, do not require driver support for complexities such as regulator
+and clock management. In fact, the controller may not even require the
+configuration of a control interface by the operating system, instead
+presenting a set of fixed windows describing a subset of IO, Memory and
+Configuration Spaces.
+
+Such a controller can be described purely in terms of the standardized device
+tree bindings communicated in pci.txt:
+
+
+Properties of the host controller node:
+
+- compatible     : Must be "pci-host-cam-generic" or "pci-host-ecam-generic"
+                   depending on the layout of configuration space (CAM vs
+                   ECAM respectively).
+
+- device_type    : Must be "pci".
+
+- ranges         : As described in IEEE Std 1275-1994, but must provide
+                   at least a definition of non-prefetchable memory. One
+                   or both of prefetchable Memory and IO Space may also
+                   be provided.
+
+- bus-range      : Optional property (also described in IEEE Std 1275-1994)
+                   to indicate the range of bus numbers for this controller.
+                   If absent, defaults to <0 255> (i.e. all buses).
+
+- #address-cells : Must be 3.
+
+- #size-cells    : Must be 2.
+
+- reg            : The Configuration Space base address and size, as accessed
+                   from the parent bus.
+
+
+Properties of the /chosen node:
+
+- linux,pci-probe-only
+                 : Optional property which takes a single-cell argument.
+                   If '0', then Linux will assign devices in its usual manner,
+                   otherwise it will not try to assign devices and instead use
+                   them as they are configured already.
+
+Configuration Space is assumed to be memory-mapped (as opposed to being
+accessed via an ioport) and laid out with a direct correspondence to the
+geography of a PCI bus address by concatenating the various components to
+form an offset.
+
+For CAM, this 24-bit offset is:
+
+        cfg_offset(bus, device, function, register) =
+                   bus << 16 | device << 11 | function << 8 | register
+
+Whilst ECAM extends this by 4 bits to accomodate 4k of function space:
+
+        cfg_offset(bus, device, function, register) =
+                   bus << 20 | device << 15 | function << 12 | register
+
+Interrupt mapping is exactly as described in `Open Firmware Recommended
+Practice: Interrupt Mapping' and requires the following properties:
+
+- #interrupt-cells   : Must be 1
+
+- interrupt-map      : <see aforementioned specification>
+
+- interrupt-map-mask : <see aforementioned specification>
+
+
+Example:
+
+pci {
+    compatible = "pci-host-cam-generic"
+    device_type = "pci";
+    #address-cells = <3>;
+    #size-cells = <2>;
+    bus-range = <0x0 0x1>;
+
+    // CPU_PHYSICAL(2)  SIZE(2)
+    reg = <0x0 0x40000000  0x0 0x1000000>;
+
+    // BUS_ADDRESS(3)  CPU_PHYSICAL(2)  SIZE(2)
+    ranges = <0x01000000 0x0 0x01000000  0x0 0x01000000  0x0 0x00010000>,
+             <0x02000000 0x0 0x41000000  0x0 0x41000000  0x0 0x3f000000>;
+
+
+    #interrupt-cells = <0x1>;
+
+    // PCI_DEVICE(3)  INT#(1)  CONTROLLER(PHANDLE)  CONTROLLER_DATA(3)
+    interrupt-map = <  0x0 0x0 0x0  0x1  &gic  0x0 0x4 0x1
+                     0x800 0x0 0x0  0x1  &gic  0x0 0x5 0x1
+                    0x1000 0x0 0x0  0x1  &gic  0x0 0x6 0x1
+                    0x1800 0x0 0x0  0x1  &gic  0x0 0x7 0x1>;
+
+    // PCI_DEVICE(3)  INT#(1)
+    interrupt-map-mask = <0xf800 0x0 0x0  0x7>;
+}
diff --git a/Bindings/pci/pci-rcar-gen2.txt b/Bindings/pci/pci-rcar-gen2.txt
new file mode 100644
index 000000000000..d8ef5bf50f11
--- /dev/null
+++ b/Bindings/pci/pci-rcar-gen2.txt
@@ -0,0 +1,66 @@
+Renesas AHB to PCI bridge
+-------------------------
+
+This is the bridge used internally to connect the USB controllers to the
+AHB. There is one bridge instance per USB port connected to the internal
+OHCI and EHCI controllers.
+
+Required properties:
+- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
+	      "renesas,pci-r8a7791" for the R8A7791 SoC.
+- reg:	A list of physical regions to access the device: the first is
+	the operational registers for the OHCI/EHCI controllers and the
+	second is for the bridge configuration and control registers.
+- interrupts: interrupt for the device.
+- clocks: The reference to the device clock.
+- bus-range: The PCI bus number range; as this is a single bus, the range
+	     should be specified as the same value twice.
+- #address-cells: must be 3.
+- #size-cells: must be 2.
+- #interrupt-cells: must be 1.
+- interrupt-map: standard property used to define the mapping of the PCI
+  interrupts to the GIC interrupts.
+- interrupt-map-mask: standard property that helps to define the interrupt
+  mapping.
+
+Example SoC configuration:
+
+	pci0: pci@ee090000  {
+		compatible = "renesas,pci-r8a7790";
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		reg = <0x0 0xee090000 0x0 0xc00>,
+		      <0x0 0xee080000 0x0 0x1100>;
+		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+		pci@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usbphy 0 0>;
+			phy-names = "usb";
+		};
+
+		pci@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usbphy 0 0>;
+			phy-names = "usb";
+		};
+	};
+
+Example board setup:
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
diff --git a/Bindings/pci/rcar-pci.txt b/Bindings/pci/rcar-pci.txt
new file mode 100644
index 000000000000..29d3b989d3b0
--- /dev/null
+++ b/Bindings/pci/rcar-pci.txt
@@ -0,0 +1,47 @@
+* Renesas RCar PCIe interface
+
+Required properties:
+- compatible: should contain one of the following
+	"renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791"
+- reg: base address and length of the pcie controller registers.
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- bus-range: PCI bus numbers covered
+- device_type: set to "pci"
+- ranges: ranges for the PCI memory and I/O regions.
+- dma-ranges: ranges for the inbound memory regions.
+- interrupts: two interrupt sources for MSI interrupts, followed by interrupt
+	source for hardware related interrupts (e.g. link speed change).
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+	to define the mapping of the PCIe interface to interrupt
+	numbers.
+- clocks: from common clock binding: clock specifiers for the PCIe controller
+	and PCIe bus clocks.
+- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
+
+Example:
+
+SoC specific DT Entry:
+
+	pcie: pcie@fe000000 {
+		compatible = "renesas,pcie-r8a7791";
+		reg = <0 0xfe000000 0 0x80000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x00 0xff>;
+		device_type = "pci";
+		ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+			  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+			  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+			  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000
+			      0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>;
+		interrupts = <0 116 4>, <0 117 4>, <0 118 4>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 116 4>;
+		clocks = <&mstp3_clks R8A7791_CLK_PCIE>, <&pcie_bus_clk>;
+		clock-names = "pcie", "pcie_bus";
+		status = "disabled";
+	};
diff --git a/Bindings/pci/samsung,exynos5440-pcie.txt b/Bindings/pci/samsung,exynos5440-pcie.txt
new file mode 100644
index 000000000000..4f9d23d2ed67
--- /dev/null
+++ b/Bindings/pci/samsung,exynos5440-pcie.txt
@@ -0,0 +1,65 @@
+* Samsung Exynos 5440 PCIe interface
+
+This PCIe host controller is based on the Synopsis Designware PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: "samsung,exynos5440-pcie"
+- reg: base addresses and lengths of the pcie controller,
+	the phy controller, additional register for the phy controller.
+- interrupts: A list of interrupt outputs for level interrupt,
+	pulse interrupt, special interrupt.
+
+Example:
+
+SoC specific DT Entry:
+
+	pcie@290000 {
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+		reg = <0x290000 0x1000
+			0x270000 0x1000
+			0x271000 0x40>;
+		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+		clocks = <&clock 28>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <4>;
+	};
+
+	pcie@2a0000 {
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+		reg = <0x2a0000 0x1000
+			0x272000 0x1000
+			0x271040 0x40>;
+		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+		clocks = <&clock 29>, <&clock 27>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <4>;
+	};
+
+Board specific DT Entry:
+
+	pcie@290000 {
+		reset-gpio = <&pin_ctrl 5 0>;
+	};
+
+	pcie@2a0000 {
+		reset-gpio = <&pin_ctrl 22 0>;
+	};
diff --git a/Bindings/pci/spear13xx-pcie.txt b/Bindings/pci/spear13xx-pcie.txt
new file mode 100644
index 000000000000..49ea76da7718
--- /dev/null
+++ b/Bindings/pci/spear13xx-pcie.txt
@@ -0,0 +1,14 @@
+SPEAr13XX PCIe DT detail:
+================================
+
+SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy
+controller.
+
+Required properties:
+- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
+- phys		    : phandle to phy node associated with pcie controller
+- phy-names	    : must be "pcie-phy"
+- All other definitions as per generic PCI bindings
+
+ Optional properties:
+- st,pcie-is-gen1 indicates that forced gen1 initialization is needed.
diff --git a/Bindings/pci/ti-pci.txt b/Bindings/pci/ti-pci.txt
new file mode 100644
index 000000000000..3d217911b313
--- /dev/null
+++ b/Bindings/pci/ti-pci.txt
@@ -0,0 +1,59 @@
+TI PCI Controllers
+
+PCIe Designware Controller
+ - compatible: Should be "ti,dra7-pcie""
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI specific registers
+	       The second entry must be "rc-dbics" for the designware pcie
+	       registers
+	       The third entry must be "config" for the PCIe configuration space
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+	       number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+	       where <X> is the instance number of the pcie from the HW spec.
+ - interrupts : Two interrupt entries must be specified. The first one is for
+		main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+   #size-cells,
+   #interrupt-cells,
+   device_type,
+   ranges,
+   num-lanes,
+   interrupt-map-mask,
+   interrupt-map : as specified in ../designware-pcie.txt
+
+Example:
+axi {
+	compatible = "simple-bus";
+	#size-cells = <1>;
+	#address-cells = <1>;
+	ranges = <0x51000000 0x51000000 0x3000
+		  0x0	     0x20000000 0x10000000>;
+	pcie@51000000 {
+		compatible = "ti,dra7-pcie";
+		reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+		reg-names = "rc_dbics", "ti_conf", "config";
+		interrupts = <0 232 0x4>, <0 233 0x4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x81000000 0 0          0x03000 0 0x00010000
+			  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+		#interrupt-cells = <1>;
+		num-lanes = <1>;
+		ti,hwmods = "pcie1";
+		phys = <&pcie1_phy>;
+		phy-names = "pcie-phy0";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/Bindings/phy/apm-xgene-phy.txt b/Bindings/phy/apm-xgene-phy.txt
new file mode 100644
index 000000000000..5f3a65a9dd88
--- /dev/null
+++ b/Bindings/phy/apm-xgene-phy.txt
@@ -0,0 +1,79 @@
+* APM X-Gene 15Gbps Multi-purpose PHY nodes
+
+PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each
+PHY (pair of lanes) has its own node.
+
+Required properties:
+- compatible		: Shall be "apm,xgene-phy".
+- reg			: PHY memory resource is the SDS PHY access resource.
+- #phy-cells		: Shall be 1 as it expects one argument for setting
+			  the mode of the PHY. Possible values are 0 (SATA),
+			  1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI).
+
+Optional properties:
+- status		: Shall be "ok" if enabled or "disabled" if disabled.
+			  Default is "ok".
+- clocks		: Reference to the clock entry.
+- apm,tx-eye-tuning	: Manual control to fine tune the capture of the serial
+			  bit lines from the automatic calibrated position.
+			  Two set of 3-tuple setting for each (up to 3)
+			  supported link speed on the host. Range from 0 to
+			  127 in unit of one bit period. Default is 10.
+- apm,tx-eye-direction	: Eye tuning manual control direction. 0 means sample
+			  data earlier than the nominal sampling point. 1 means
+			  sample data later than the nominal sampling point.
+			  Two set of 3-tuple setting for each (up to 3)
+			  supported link speed on the host. Default is 0.
+- apm,tx-boost-gain	: Frequency boost AC (LSB 3-bit) and DC (2-bit)
+			  gain control. Two set of 3-tuple setting for each
+			  (up to 3) supported link speed on the host. Range is
+			  between 0 to 31 in unit of dB. Default is 3.
+- apm,tx-amplitude	: Amplitude control. Two set of 3-tuple setting for
+			  each (up to 3) supported link speed on the host.
+			  Range is between 0 to 199500 in unit of uV.
+			  Default is 199500 uV.
+- apm,tx-pre-cursor1	: 1st pre-cursor emphasis taps control. Two set of
+			  3-tuple setting for each (up to 3) supported link
+			  speed on the host. Range is 0 to 273000 in unit of
+			  uV. Default is 0.
+- apm,tx-pre-cursor2	: 2st pre-cursor emphasis taps control. Two set of
+			  3-tuple setting for each (up to 3) supported link
+			  speed on the host. Range is 0 to 127400 in unit uV.
+			  Default is 0x0.
+- apm,tx-post-cursor	: Post-cursor emphasis taps control. Two set of
+			  3-tuple setting for Gen1, Gen2, and Gen3. Range is
+			  between 0 to 0x1f in unit of 18.2mV. Default is 0xf.
+- apm,tx-speed		: Tx operating speed. One set of 3-tuple for each
+			  supported link speed on the host.
+			   0 = 1-2Gbps
+			   1 = 2-4Gbps (1st tuple default)
+			   2 = 4-8Gbps
+			   3 = 8-15Gbps (2nd tuple default)
+			   4 = 2.5-4Gbps
+			   5 = 4-5Gbps
+			   6 = 5-6Gbps
+			   7 = 6-16Gbps (3rd tuple default)
+
+NOTE: PHY override parameters are board specific setting.
+
+Example:
+		phy1: phy@1f21a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f21a000 0x0 0x100>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+			status = "ok";
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+			status = "ok";
+		};
diff --git a/Bindings/phy/berlin-sata-phy.txt b/Bindings/phy/berlin-sata-phy.txt
new file mode 100644
index 000000000000..88f8c23384c0
--- /dev/null
+++ b/Bindings/phy/berlin-sata-phy.txt
@@ -0,0 +1,34 @@
+Berlin SATA PHY
+---------------
+
+Required properties:
+- compatible: should be "marvell,berlin2q-sata-phy"
+- address-cells: should be 1
+- size-cells: should be 0
+- phy-cells: from the generic PHY bindings, must be 1
+- reg: address and length of the register
+- clocks: reference to the clock entry
+
+Sub-nodes:
+Each PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+- reg: the PHY number
+
+Example:
+	sata_phy: phy@f7e900a0 {
+		compatible = "marvell,berlin2q-sata-phy";
+		reg = <0xf7e900a0 0x200>;
+		clocks = <&chip CLKID_SATA>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#phy-cells = <1>;
+
+		sata-phy@0 {
+			reg = <0>;
+		};
+
+		sata-phy@1 {
+			reg = <1>;
+		};
+	};
diff --git a/Bindings/phy/hix5hd2-phy.txt b/Bindings/phy/hix5hd2-phy.txt
new file mode 100644
index 000000000000..296168b74d24
--- /dev/null
+++ b/Bindings/phy/hix5hd2-phy.txt
@@ -0,0 +1,22 @@
+Hisilicon hix5hd2 SATA PHY
+-----------------------
+
+Required properties:
+- compatible: should be "hisilicon,hix5hd2-sata-phy"
+- reg: offset and length of the PHY registers
+- #phy-cells: must be 0
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Optional Properties:
+- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
+- hisilicon,power-reg: offset and bit number within peripheral-syscon,
+	register of controlling sata power supply.
+
+Example:
+	sata_phy: phy@f9900000 {
+		compatible = "hisilicon,hix5hd2-sata-phy";
+		reg = <0xf9900000 0x10000>;
+		#phy-cells = <0>;
+		hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+		hisilicon,power-reg = <0x8 10>;
+	};
diff --git a/Bindings/phy/phy-miphy365x.txt b/Bindings/phy/phy-miphy365x.txt
new file mode 100644
index 000000000000..42c880886cf7
--- /dev/null
+++ b/Bindings/phy/phy-miphy365x.txt
@@ -0,0 +1,76 @@
+STMicroelectronics STi MIPHY365x PHY binding
+============================================
+
+This binding describes a miphy device that is used to control PHY hardware
+for SATA and PCIe.
+
+Required properties (controller (parent) node):
+- compatible    : Should be "st,miphy365x-phy"
+- st,syscfg     : Should be a phandle of the system configuration register group
+		  which contain the SATA, PCIe mode setting bits
+
+Required nodes	:  A sub-node is required for each channel the controller
+		   provides. Address range information including the usual
+		   'reg' and 'reg-names' properties are used inside these
+		   nodes to describe the controller's topology. These nodes
+		   are translated by the driver's .xlate() function.
+
+Required properties (port (child) node):
+- #phy-cells 	: Should be 1 (See second example)
+		  Cell after port phandle is device type from:
+			- MIPHY_TYPE_SATA
+			- MIPHY_TYPE_PCI
+- reg        	: Address and length of register sets for each device in
+		  "reg-names"
+- reg-names     : The names of the register addresses corresponding to the
+		  registers filled in "reg":
+			- sata:   For SATA devices
+			- pcie:   For PCIe devices
+			- syscfg: To specify the syscfg based config register
+
+Optional properties (port (child) node):
+- st,sata-gen	     :	Generation of locally attached SATA IP. Expected values
+			are {1,2,3). If not supplied generation 1 hardware will
+			be expected
+- st,pcie-tx-pol-inv :	Bool property to invert the polarity PCIe Tx (Txn/Txp)
+- st,sata-tx-pol-inv :	Bool property to invert the polarity SATA Tx (Txn/Txp)
+
+Example:
+
+	miphy365x_phy: miphy365x@fe382000 {
+		compatible      = "st,miphy365x-phy";
+		st,syscfg  	= <&syscfg_rear>;
+		#address-cells	= <1>;
+		#size-cells	= <1>;
+		ranges;
+
+		phy_port0: port@fe382000 {
+			reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
+			reg-names = "sata", "pcie", "syscfg";
+			#phy-cells = <1>;
+			st,sata-gen = <3>;
+		};
+
+		phy_port1: port@fe38a000 {
+			reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;;
+			reg-names = "sata", "pcie", "syscfg";
+			#phy-cells = <1>;
+			st,pcie-tx-pol-inv;
+		};
+	};
+
+Specifying phy control of devices
+=================================
+
+Device nodes should specify the configuration required in their "phys"
+property, containing a phandle to the phy port node and a device type.
+
+Example:
+
+#include <dt-bindings/phy/phy-miphy365x.h>
+
+	sata0: sata@fe380000 {
+		...
+		phys	  = <&phy_port0 MIPHY_TYPE_SATA>;
+		...
+	};
diff --git a/Bindings/phy/qcom-apq8064-sata-phy.txt b/Bindings/phy/qcom-apq8064-sata-phy.txt
new file mode 100644
index 000000000000..952f6c96bab9
--- /dev/null
+++ b/Bindings/phy/qcom-apq8064-sata-phy.txt
@@ -0,0 +1,24 @@
+Qualcomm APQ8064 SATA PHY Controller
+------------------------------------
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible: compatible list, contains "qcom,apq8064-sata-phy".
+- reg: offset and length of the SATA PHY register set;
+- #phy-cells: must be zero
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+  clock-names.
+- clock-names: must be "cfg" for phy config clock.
+
+Example:
+	sata_phy: sata-phy@1b400000 {
+		compatible = "qcom,apq8064-sata-phy";
+		reg = <0x1b400000 0x200>;
+
+		clocks = <&gcc SATA_PHY_CFG_CLK>;
+		clock-names = "cfg";
+
+		#phy-cells = <0>;
+	};
diff --git a/Bindings/phy/qcom-ipq806x-sata-phy.txt b/Bindings/phy/qcom-ipq806x-sata-phy.txt
new file mode 100644
index 000000000000..76bfbd056202
--- /dev/null
+++ b/Bindings/phy/qcom-ipq806x-sata-phy.txt
@@ -0,0 +1,23 @@
+Qualcomm IPQ806x SATA PHY Controller
+------------------------------------
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible: compatible list, contains "qcom,ipq806x-sata-phy"
+- reg: offset and length of the SATA PHY register set;
+- #phy-cells: must be zero
+- clocks: must be exactly one entry
+- clock-names: must be "cfg"
+
+Example:
+	sata_phy: sata-phy@1b400000 {
+		compatible = "qcom,ipq806x-sata-phy";
+		reg = <0x1b400000 0x200>;
+
+		clocks = <&gcc SATA_PHY_CFG_CLK>;
+		clock-names = "cfg";
+
+		#phy-cells = <0>;
+	};
diff --git a/Bindings/phy/st-spear-miphy.txt b/Bindings/phy/st-spear-miphy.txt
new file mode 100644
index 000000000000..2a6bfdcc09b3
--- /dev/null
+++ b/Bindings/phy/st-spear-miphy.txt
@@ -0,0 +1,15 @@
+ST SPEAr miphy DT details
+=========================
+
+ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA.
+
+Required properties:
+- compatible : should be "st,spear1310-miphy" or "st,spear1340-miphy"
+- reg : offset and length of the PHY register set.
+- misc: phandle for the syscon node to access misc registers
+- #phy-cells : from the generic PHY bindings, must be 1.
+	- cell[1]: 0 if phy used for SATA, 1 for PCIe.
+
+Optional properties:
+- phy-id: Instance id of the phy. Only required when there are multiple phys
+  present on a implementation.
diff --git a/Bindings/phy/sun4i-usb-phy.txt b/Bindings/phy/sun4i-usb-phy.txt
new file mode 100644
index 000000000000..16528b9eb561
--- /dev/null
+++ b/Bindings/phy/sun4i-usb-phy.txt
@@ -0,0 +1,37 @@
+Allwinner sun4i USB PHY
+-----------------------
+
+Required properties:
+- compatible : should be one of
+  * allwinner,sun4i-a10-usb-phy
+  * allwinner,sun5i-a13-usb-phy
+  * allwinner,sun6i-a31-usb-phy
+  * allwinner,sun7i-a20-usb-phy
+- reg : a list of offset + length pairs
+- reg-names :
+  * "phy_ctrl"
+  * "pmu1"
+  * "pmu2" for sun4i, sun6i or sun7i
+- #phy-cells : from the generic phy bindings, must be 1
+- clocks : phandle + clock specifier for the phy clocks
+- clock-names :
+  * "usb_phy" for sun4i, sun5i or sun7i
+  * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i
+- resets : a list of phandle + reset specifier pairs
+- reset-names :
+  * "usb0_reset"
+  * "usb1_reset"
+  * "usb2_reset" for sun4i, sun6i or sun7i
+
+Example:
+	usbphy: phy@0x01c13400 {
+		#phy-cells = <1>;
+		compatible = "allwinner,sun4i-a10-usb-phy";
+		/* phy base regs, phy1 pmu reg, phy2 pmu reg */
+		reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+		reg-names = "phy_ctrl", "pmu1", "pmu2";
+		clocks = <&usb_clk 8>;
+		clock-names = "usb_phy";
+		resets = <&usb_clk 1>, <&usb_clk 2>;
+		reset-names = "usb1_reset", "usb2_reset";
+	};
diff --git a/Bindings/phy/ti-phy.txt b/Bindings/phy/ti-phy.txt
new file mode 100644
index 000000000000..305e3df3d9b1
--- /dev/null
+++ b/Bindings/phy/ti-phy.txt
@@ -0,0 +1,102 @@
+TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs
+
+OMAP CONTROL PHY
+
+Required properties:
+ - compatible: Should be one of
+ "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4.
+ "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register
+                        e.g. USB2_PHY on OMAP5.
+ "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
+                        e.g. USB3 PHY and SATA PHY on OMAP5.
+ "ti,control-phy-pcie" - for pcie to support external clock for pcie and to
+			set PCS delay value.
+			e.g. PCIE PHY in DRA7x
+ "ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on
+                        DRA7 platform.
+ "ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on
+                        AM437 platform.
+ - reg : register ranges as listed in the reg-names property
+ - reg-names: "otghs_control" for control-phy-otghs
+	      "power", "pcie_pcs" and "control_sma" for control-phy-pcie
+	      "power" for all other types
+
+omap_control_usb: omap-control-usb@4a002300 {
+        compatible = "ti,control-phy-otghs";
+        reg = <0x4a00233c 0x4>;
+        reg-names = "otghs_control";
+};
+
+OMAP USB2 PHY
+
+Required properties:
+ - compatible: Should be "ti,omap-usb2"
+ - reg : Address and length of the register set for the device.
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
+ - clocks: a list of phandles and clock-specifier pairs, one for each entry in
+   clock-names.
+ - clock-names: should include:
+   * "wkupclk" - wakeup clock.
+   * "refclk" - reference clock (optional).
+
+Optional properties:
+ - ctrl-module : phandle of the control module used by PHY driver to power on
+   the PHY.
+
+This is usually a subnode of ocp2scp to which it is connected.
+
+usb2phy@4a0ad080 {
+	compatible = "ti,omap-usb2";
+	reg = <0x4a0ad080 0x58>;
+	ctrl-module = <&omap_control_usb>;
+	#phy-cells = <0>;
+	clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
+	clock-names = "wkupclk", "refclk";
+};
+
+TI PIPE3 PHY
+
+Required properties:
+ - compatible: Should be "ti,phy-usb3", "ti,phy-pipe3-sata" or
+   "ti,phy-pipe3-pcie. "ti,omap-usb3" is deprecated.
+ - reg : Address and length of the register set for the device.
+ - reg-names: The names of the register addresses corresponding to the registers
+   filled in "reg".
+ - #phy-cells: determine the number of cells that should be given in the
+   phandle while referencing this phy.
+ - clocks: a list of phandles and clock-specifier pairs, one for each entry in
+   clock-names.
+ - clock-names: should include:
+   * "wkupclk" - wakeup clock.
+   * "sysclk" - system clock.
+   * "refclk" - reference clock.
+   * "dpll_ref" - external dpll ref clk
+   * "dpll_ref_m2" - external dpll ref clk
+   * "phy-div" - divider for apll
+   * "div-clk" - apll clock
+
+Optional properties:
+ - ctrl-module : phandle of the control module used by PHY driver to power on
+   the PHY.
+ - id: If there are multiple instance of the same type, in order to
+   differentiate between each instance "id" can be used (e.g., multi-lane PCIe
+   PHY). If "id" is not provided, it is set to default value of '1'.
+
+This is usually a subnode of ocp2scp to which it is connected.
+
+usb3phy@4a084400 {
+	compatible = "ti,phy-usb3";
+	reg = <0x4a084400 0x80>,
+	      <0x4a084800 0x64>,
+	      <0x4a084c00 0x40>;
+	reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+	ctrl-module = <&omap_control_usb>;
+	#phy-cells = <0>;
+	clocks = <&usb_phy_cm_clk32k>,
+		 <&sys_clkin>,
+		 <&usb_otg_ss_refclk960m>;
+	clock-names =	"wkupclk",
+			"sysclk",
+			"refclk";
+};
diff --git a/Bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/Bindings/pinctrl/brcm,bcm11351-pinctrl.txt
new file mode 100644
index 000000000000..4eaae32821ae
--- /dev/null
+++ b/Bindings/pinctrl/brcm,bcm11351-pinctrl.txt
@@ -0,0 +1,461 @@
+Broadcom BCM281xx Pin Controller
+
+This is a pin controller for the Broadcom BCM281xx SoC family, which includes
+BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
+
+=== Pin Controller Node ===
+
+Required Properties:
+
+- compatible:	Must be "brcm,bcm11351-pinctrl"
+- reg:		Base address of the PAD Controller register block and the size
+		of the block.
+
+For example, the following is the bare minimum node:
+
+	pinctrl@35004800 {
+		compatible = "brcm,bcm11351-pinctrl";
+		reg = <0x35004800 0x430>;
+	};
+
+As a pin controller device, in addition to the required properties, this node
+should also contain the pin configuration nodes that client devices reference,
+if any.
+
+=== Pin Configuration Node ===
+
+Each pin configuration node is a sub-node of the pin controller node and is a
+container of an arbitrary number of subnodes, called pin group nodes in this
+document.
+
+Please refer to the pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the definition of a
+"pin configuration node".
+
+=== Pin Group Node ===
+
+A pin group node specifies the desired pin mux and/or pin configuration for an
+arbitrary number of pins.  The name of the pin group node is optional and not
+used.
+
+A pin group node only affects the properties specified in the node, and has no
+effect on any properties that are omitted.
+
+The pin group node accepts a subset of the generic pin config properties. For
+details generic pin config properties, please refer to pinctrl-bindings.txt
+and <include/linux/pinctrl/pinconfig-generic.h>.
+
+Each pin controlled by this pin controller belong to one of three types:
+Standard, I2C, and HDMI.  Each type accepts a different set of pin config
+properties.  A list of pins and their types is provided below.
+
+Required Properties (applicable to all pins):
+
+- pins:		Multiple strings.  Specifies the name(s) of one or more pins to
+		be configured by this node.
+
+Optional Properties (for standard pins):
+
+- function:			String. Specifies the pin mux selection. Values
+				must be one of: "alt1", "alt2", "alt3", "alt4"
+- input-schmitt-enable:		No arguments. Enable schmitt-trigger mode.
+- input-schmitt-disable:	No arguments. Disable schmitt-trigger mode.
+- bias-pull-up:			No arguments. Pull up on pin.
+- bias-pull-down:		No arguments. Pull down on pin.
+- bias-disable:			No arguments. Disable pin bias.
+- slew-rate:			Integer. Meaning depends on configured pin mux:
+				*_SCL or *_SDA:
+					0: Standard(100kbps)& Fast(400kbps) mode
+					1: Highspeed (3.4Mbps) mode
+				IC_DM or IC_DP:
+					0: normal slew rate
+					1: fast slew rate
+				Otherwise:
+					0: fast slew rate
+					1: normal slew rate
+- input-enable:			No arguments. Enable input (does not affect
+				output.)
+- input-disable:		No arguments. Disable input (does not affect
+				output.)
+- drive-strength:		Integer. Drive strength in mA.  Valid values are
+				2, 4, 6, 8, 10, 12, 14, 16 mA.
+
+Optional Properties (for I2C pins):
+
+- function:			String. Specifies the pin mux selection. Values
+				must be one of: "alt1", "alt2", "alt3", "alt4"
+- bias-pull-up:			Integer. Pull up strength in Ohm. There are 3
+				pull-up resisitors (1.2k, 1.8k, 2.7k) available
+				in parallel for I2C pins, so the valid values
+				are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm.
+- bias-disable:			No arguments. Disable pin bias.
+- slew-rate:			Integer. Meaning depends on configured pin mux:
+				*_SCL or *_SDA:
+					0: Standard(100kbps)& Fast(400kbps) mode
+					1: Highspeed (3.4Mbps) mode
+				IC_DM or IC_DP:
+					0: normal slew rate
+					1: fast slew rate
+				Otherwise:
+					0: fast slew rate
+					1: normal slew rate
+- input-enable:			No arguments. Enable input (does not affect
+				output.)
+- input-disable:		No arguments. Disable input (does not affect
+				output.)
+
+Optional Properties (for HDMI pins):
+
+- function:			String. Specifies the pin mux selection. Values
+				must be one of: "alt1", "alt2", "alt3", "alt4"
+- slew-rate:			Integer. Controls slew rate.
+					0: Standard(100kbps)& Fast(400kbps) mode
+					1: Highspeed (3.4Mbps) mode
+- input-enable:			No arguments. Enable input (does not affect
+				output.)
+- input-disable:		No arguments. Disable input (does not affect
+				output.)
+
+Example:
+// pin controller node
+pinctrl@35004800 {
+	compatible = "brcm,bcm11351-pinctrl";
+	reg = <0x35004800 0x430>;
+
+	// pin configuration node
+	dev_a_default: dev_a_active {
+		//group node defining 1 standard pin
+		grp_1 {
+			pins		= "std_pin1";
+			function	= "alt1";
+			input-schmitt-enable;
+			bias-disable;
+			slew-rate	= <1>;
+			drive-strength	= <4>;
+		};
+
+		// group node defining 2 I2C pins
+		grp_2 {
+			pins		= "i2c_pin1", "i2c_pin2";
+			function	= "alt2";
+			bias-pull-up	= <720>;
+			input-enable;
+		};
+
+		// group node defining 2 HDMI pins
+		grp_3 {
+			pins		= "hdmi_pin1", "hdmi_pin2";
+			function	= "alt3";
+			slew-rate	= <1>;
+		};
+
+		// other pin group nodes
+		...
+	};
+
+	// other pin configuration nodes
+	...
+};
+
+In the example above, "dev_a_active" is a pin configuration node with a number
+of sub-nodes.  In the pin group node "grp_1", one pin, "std_pin1", is defined in
+the "pins" property.  Thus, the remaining properties in the "grp_1" node applies
+only to this pin, including the following settings:
+ - setting pinmux to "alt1"
+ - enabling schmitt-trigger (hystersis) mode
+ - disabling pin bias
+ - setting the slew-rate to 1
+ - setting the drive strength to 4 mA
+Note that neither "input-enable" nor "input-disable" was specified - the pinctrl
+subsystem will therefore leave this property unchanged from whatever state it
+was in before applying these changes.
+
+The "pins" property in the pin group node "grp_2" specifies two pins -
+"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node,
+therefore, applies to both of these pins.  The properties include:
+ - setting pinmux to "alt2"
+ - setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors
+   in parallel)
+ - enabling both pins' input
+"slew-rate" is not specified in this pin group node, so the slew-rate for these
+pins are left as-is.
+
+Finally, "grp_3" defines two HDMI pins.  The following properties are applied to
+both pins:
+ - setting pinmux to "alt3"
+ - setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps
+   Highspeed mode
+The input is neither enabled or disabled, and is left untouched.
+
+=== Pin Names and Type ===
+
+The following are valid pin names and their pin types:
+
+	"adcsync",		Standard
+	"bat_rm",		Standard
+	"bsc1_scl",		I2C
+	"bsc1_sda",		I2C
+	"bsc2_scl",		I2C
+	"bsc2_sda",		I2C
+	"classgpwr",		Standard
+	"clk_cx8",		Standard
+	"clkout_0",		Standard
+	"clkout_1",		Standard
+	"clkout_2",		Standard
+	"clkout_3",		Standard
+	"clkreq_in_0",		Standard
+	"clkreq_in_1",		Standard
+	"cws_sys_req1",		Standard
+	"cws_sys_req2",		Standard
+	"cws_sys_req3",		Standard
+	"digmic1_clk",		Standard
+	"digmic1_dq",		Standard
+	"digmic2_clk",		Standard
+	"digmic2_dq",		Standard
+	"gpen13",		Standard
+	"gpen14",		Standard
+	"gpen15",		Standard
+	"gpio00",		Standard
+	"gpio01",		Standard
+	"gpio02",		Standard
+	"gpio03",		Standard
+	"gpio04",		Standard
+	"gpio05",		Standard
+	"gpio06",		Standard
+	"gpio07",		Standard
+	"gpio08",		Standard
+	"gpio09",		Standard
+	"gpio10",		Standard
+	"gpio11",		Standard
+	"gpio12",		Standard
+	"gpio13",		Standard
+	"gpio14",		Standard
+	"gps_pablank",		Standard
+	"gps_tmark",		Standard
+	"hdmi_scl",		HDMI
+	"hdmi_sda",		HDMI
+	"ic_dm",		Standard
+	"ic_dp",		Standard
+	"kp_col_ip_0",		Standard
+	"kp_col_ip_1",		Standard
+	"kp_col_ip_2",		Standard
+	"kp_col_ip_3",		Standard
+	"kp_row_op_0",		Standard
+	"kp_row_op_1",		Standard
+	"kp_row_op_2",		Standard
+	"kp_row_op_3",		Standard
+	"lcd_b_0",		Standard
+	"lcd_b_1",		Standard
+	"lcd_b_2",		Standard
+	"lcd_b_3",		Standard
+	"lcd_b_4",		Standard
+	"lcd_b_5",		Standard
+	"lcd_b_6",		Standard
+	"lcd_b_7",		Standard
+	"lcd_g_0",		Standard
+	"lcd_g_1",		Standard
+	"lcd_g_2",		Standard
+	"lcd_g_3",		Standard
+	"lcd_g_4",		Standard
+	"lcd_g_5",		Standard
+	"lcd_g_6",		Standard
+	"lcd_g_7",		Standard
+	"lcd_hsync",		Standard
+	"lcd_oe",		Standard
+	"lcd_pclk",		Standard
+	"lcd_r_0",		Standard
+	"lcd_r_1",		Standard
+	"lcd_r_2",		Standard
+	"lcd_r_3",		Standard
+	"lcd_r_4",		Standard
+	"lcd_r_5",		Standard
+	"lcd_r_6",		Standard
+	"lcd_r_7",		Standard
+	"lcd_vsync",		Standard
+	"mdmgpio0",		Standard
+	"mdmgpio1",		Standard
+	"mdmgpio2",		Standard
+	"mdmgpio3",		Standard
+	"mdmgpio4",		Standard
+	"mdmgpio5",		Standard
+	"mdmgpio6",		Standard
+	"mdmgpio7",		Standard
+	"mdmgpio8",		Standard
+	"mphi_data_0",		Standard
+	"mphi_data_1",		Standard
+	"mphi_data_2",		Standard
+	"mphi_data_3",		Standard
+	"mphi_data_4",		Standard
+	"mphi_data_5",		Standard
+	"mphi_data_6",		Standard
+	"mphi_data_7",		Standard
+	"mphi_data_8",		Standard
+	"mphi_data_9",		Standard
+	"mphi_data_10",		Standard
+	"mphi_data_11",		Standard
+	"mphi_data_12",		Standard
+	"mphi_data_13",		Standard
+	"mphi_data_14",		Standard
+	"mphi_data_15",		Standard
+	"mphi_ha0",		Standard
+	"mphi_hat0",		Standard
+	"mphi_hat1",		Standard
+	"mphi_hce0_n",		Standard
+	"mphi_hce1_n",		Standard
+	"mphi_hrd_n",		Standard
+	"mphi_hwr_n",		Standard
+	"mphi_run0",		Standard
+	"mphi_run1",		Standard
+	"mtx_scan_clk",		Standard
+	"mtx_scan_data",	Standard
+	"nand_ad_0",		Standard
+	"nand_ad_1",		Standard
+	"nand_ad_2",		Standard
+	"nand_ad_3",		Standard
+	"nand_ad_4",		Standard
+	"nand_ad_5",		Standard
+	"nand_ad_6",		Standard
+	"nand_ad_7",		Standard
+	"nand_ale",		Standard
+	"nand_cen_0",		Standard
+	"nand_cen_1",		Standard
+	"nand_cle",		Standard
+	"nand_oen",		Standard
+	"nand_rdy_0",		Standard
+	"nand_rdy_1",		Standard
+	"nand_wen",		Standard
+	"nand_wp",		Standard
+	"pc1",			Standard
+	"pc2",			Standard
+	"pmu_int",		Standard
+	"pmu_scl",		I2C
+	"pmu_sda",		I2C
+	"rfst2g_mtsloten3g",	Standard
+	"rgmii_0_rx_ctl",	Standard
+	"rgmii_0_rxc",		Standard
+	"rgmii_0_rxd_0",	Standard
+	"rgmii_0_rxd_1",	Standard
+	"rgmii_0_rxd_2",	Standard
+	"rgmii_0_rxd_3",	Standard
+	"rgmii_0_tx_ctl",	Standard
+	"rgmii_0_txc",		Standard
+	"rgmii_0_txd_0",	Standard
+	"rgmii_0_txd_1",	Standard
+	"rgmii_0_txd_2",	Standard
+	"rgmii_0_txd_3",	Standard
+	"rgmii_1_rx_ctl",	Standard
+	"rgmii_1_rxc",		Standard
+	"rgmii_1_rxd_0",	Standard
+	"rgmii_1_rxd_1",	Standard
+	"rgmii_1_rxd_2",	Standard
+	"rgmii_1_rxd_3",	Standard
+	"rgmii_1_tx_ctl",	Standard
+	"rgmii_1_txc",		Standard
+	"rgmii_1_txd_0",	Standard
+	"rgmii_1_txd_1",	Standard
+	"rgmii_1_txd_2",	Standard
+	"rgmii_1_txd_3",	Standard
+	"rgmii_gpio_0",		Standard
+	"rgmii_gpio_1",		Standard
+	"rgmii_gpio_2",		Standard
+	"rgmii_gpio_3",		Standard
+	"rtxdata2g_txdata3g1",	Standard
+	"rtxen2g_txdata3g2",	Standard
+	"rxdata3g0",		Standard
+	"rxdata3g1",		Standard
+	"rxdata3g2",		Standard
+	"sdio1_clk",		Standard
+	"sdio1_cmd",		Standard
+	"sdio1_data_0",		Standard
+	"sdio1_data_1",		Standard
+	"sdio1_data_2",		Standard
+	"sdio1_data_3",		Standard
+	"sdio4_clk",		Standard
+	"sdio4_cmd",		Standard
+	"sdio4_data_0",		Standard
+	"sdio4_data_1",		Standard
+	"sdio4_data_2",		Standard
+	"sdio4_data_3",		Standard
+	"sim_clk",		Standard
+	"sim_data",		Standard
+	"sim_det",		Standard
+	"sim_resetn",		Standard
+	"sim2_clk",		Standard
+	"sim2_data",		Standard
+	"sim2_det",		Standard
+	"sim2_resetn",		Standard
+	"sri_c",		Standard
+	"sri_d",		Standard
+	"sri_e",		Standard
+	"ssp_extclk",		Standard
+	"ssp0_clk",		Standard
+	"ssp0_fs",		Standard
+	"ssp0_rxd",		Standard
+	"ssp0_txd",		Standard
+	"ssp2_clk",		Standard
+	"ssp2_fs_0",		Standard
+	"ssp2_fs_1",		Standard
+	"ssp2_fs_2",		Standard
+	"ssp2_fs_3",		Standard
+	"ssp2_rxd_0",		Standard
+	"ssp2_rxd_1",		Standard
+	"ssp2_txd_0",		Standard
+	"ssp2_txd_1",		Standard
+	"ssp3_clk",		Standard
+	"ssp3_fs",		Standard
+	"ssp3_rxd",		Standard
+	"ssp3_txd",		Standard
+	"ssp4_clk",		Standard
+	"ssp4_fs",		Standard
+	"ssp4_rxd",		Standard
+	"ssp4_txd",		Standard
+	"ssp5_clk",		Standard
+	"ssp5_fs",		Standard
+	"ssp5_rxd",		Standard
+	"ssp5_txd",		Standard
+	"ssp6_clk",		Standard
+	"ssp6_fs",		Standard
+	"ssp6_rxd",		Standard
+	"ssp6_txd",		Standard
+	"stat_1",		Standard
+	"stat_2",		Standard
+	"sysclken",		Standard
+	"traceclk",		Standard
+	"tracedt00",		Standard
+	"tracedt01",		Standard
+	"tracedt02",		Standard
+	"tracedt03",		Standard
+	"tracedt04",		Standard
+	"tracedt05",		Standard
+	"tracedt06",		Standard
+	"tracedt07",		Standard
+	"tracedt08",		Standard
+	"tracedt09",		Standard
+	"tracedt10",		Standard
+	"tracedt11",		Standard
+	"tracedt12",		Standard
+	"tracedt13",		Standard
+	"tracedt14",		Standard
+	"tracedt15",		Standard
+	"txdata3g0",		Standard
+	"txpwrind",		Standard
+	"uartb1_ucts",		Standard
+	"uartb1_urts",		Standard
+	"uartb1_urxd",		Standard
+	"uartb1_utxd",		Standard
+	"uartb2_urxd",		Standard
+	"uartb2_utxd",		Standard
+	"uartb3_ucts",		Standard
+	"uartb3_urts",		Standard
+	"uartb3_urxd",		Standard
+	"uartb3_utxd",		Standard
+	"uartb4_ucts",		Standard
+	"uartb4_urts",		Standard
+	"uartb4_urxd",		Standard
+	"uartb4_utxd",		Standard
+	"vc_cam1_scl",		I2C
+	"vc_cam1_sda",		I2C
+	"vc_cam2_scl",		I2C
+	"vc_cam2_sda",		I2C
+	"vc_cam3_scl",		I2C
+	"vc_cam3_sda",		I2C
diff --git a/Bindings/pinctrl/fsl,imx6sx-pinctrl.txt b/Bindings/pinctrl/fsl,imx6sx-pinctrl.txt
new file mode 100644
index 000000000000..b1b595220f1b
--- /dev/null
+++ b/Bindings/pinctrl/fsl,imx6sx-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6 SoloX IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sx-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  imx6sx-pinfunc.h under device tree source folder.  The last integer CONFIG is
+  the pad setting value like pull-up on this pin.  Please refer to i.MX6 SoloX
+  Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (0 << 6)
+PAD_CTL_SPEED_MED               (1 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_260ohm              (1 << 3)
+PAD_CTL_DSE_130ohm              (2 << 3)
+PAD_CTL_DSE_87ohm               (3 << 3)
+PAD_CTL_DSE_65ohm               (4 << 3)
+PAD_CTL_DSE_52ohm               (5 << 3)
+PAD_CTL_DSE_43ohm               (6 << 3)
+PAD_CTL_DSE_37ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
diff --git a/Bindings/pinctrl/marvell,armada-375-pinctrl.txt b/Bindings/pinctrl/marvell,armada-375-pinctrl.txt
new file mode 100644
index 000000000000..7de0cda4a379
--- /dev/null
+++ b/Bindings/pinctrl/marvell,armada-375-pinctrl.txt
@@ -0,0 +1,82 @@
+* Marvell Armada 375 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6720-pinctrl"
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, dev(ad2), spi0(cs1), spi1(cs1)
+mpp1          1        gpio, dev(ad3), spi0(mosi), spi1(mosi)
+mpp2          2        gpio, dev(ad4), ptp(eventreq), led(c0), audio(sdi)
+mpp3          3        gpio, dev(ad5), ptp(triggen), led(p3), audio(mclk)
+mpp4          4        gpio, dev(ad6), spi0(miso), spi1(miso)
+mpp5          5        gpio, dev(ad7), spi0(cs2), spi1(cs2)
+mpp6          6        gpio, dev(ad0), led(p1), audio(rclk)
+mpp7          7        gpio, dev(ad1), ptp(clk), led(p2), audio(extclk)
+mpp8          8        gpio, dev (bootcs), spi0(cs0), spi1(cs0)
+mpp9          9        gpio, nf(wen), spi0(sck), spi1(sck)
+mpp10        10        gpio, nf(ren), dram(vttctrl), led(c1)
+mpp11        11        gpio, dev(a0), led(c2), audio(sdo)
+mpp12        12        gpio, dev(a1), audio(bclk)
+mpp13        13        gpio, dev(readyn), pcie0(rstoutn), pcie1(rstoutn)
+mpp14        14        gpio, i2c0(sda), uart1(txd)
+mpp15        15        gpio, i2c0(sck), uart1(rxd)
+mpp16        16        gpio, uart0(txd)
+mpp17        17        gpio, uart0(rxd)
+mpp18        18        gpio, tdm(intn)
+mpp19        19        gpio, tdm(rstn)
+mpp20        20        gpio, tdm(pclk)
+mpp21        21        gpio, tdm(fsync)
+mpp22        22        gpio, tdm(drx)
+mpp23        23        gpio, tdm(dtx)
+mpp24        24        gpio, led(p0), ge1(rxd0), sd(cmd), uart0(rts)
+mpp25        25        gpio, led(p2), ge1(rxd1), sd(d0), uart0(cts)
+mpp26        26        gpio, pcie0(clkreq), ge1(rxd2), sd(d2), uart1(rts)
+mpp27        27        gpio, pcie1(clkreq), ge1(rxd3), sd(d1), uart1(cts)
+mpp28        28        gpio, led(p3), ge1(txctl), sd(clk)
+mpp29        29        gpio, pcie1(clkreq), ge1(rxclk), sd(d3)
+mpp30        30        gpio, ge1(txd0), spi1(cs0)
+mpp31        31        gpio, ge1(txd1), spi1(mosi)
+mpp32        32        gpio, ge1(txd2), spi1(sck), ptp(triggen)
+mpp33        33        gpio, ge1(txd3), spi1(miso)
+mpp34        34        gpio, ge1(txclkout), spi1(sck)
+mpp35        35        gpio, ge1(rxctl), spi1(cs1), spi0(cs2)
+mpp36        36        gpio, pcie0(clkreq)
+mpp37        37        gpio, pcie0(clkreq), tdm(intn), ge(mdc)
+mpp38        38        gpio, pcie1(clkreq), ge(mdio)
+mpp39        39        gpio, ref(clkout)
+mpp40        40        gpio, uart1(txd)
+mpp41        41        gpio, uart1(rxd)
+mpp42        42        gpio, spi1(cs2), led(c0)
+mpp43        43        gpio, sata0(prsnt), dram(vttctrl)
+mpp44        44        gpio, sata0(prsnt)
+mpp45        45        gpio, spi0(cs2), pcie0(rstoutn)
+mpp46        46        gpio, led(p0), ge0(txd0), ge1(txd0)
+mpp47        47        gpio, led(p1), ge0(txd1), ge1(txd1)
+mpp48        48        gpio, led(p2), ge0(txd2), ge1(txd2)
+mpp49        49        gpio, led(p3), ge0(txd3), ge1(txd3)
+mpp50        50        gpio, led(c0), ge0(rxd0), ge1(rxd0)
+mpp51        51        gpio, led(c1), ge0(rxd1), ge1(rxd1)
+mpp52        52        gpio, led(c2), ge0(rxd2), ge1(rxd2)
+mpp53        53        gpio, pcie1(rstoutn), ge0(rxd3), ge1(rxd3)
+mpp54        54        gpio, pcie0(rstoutn), ge0(rxctl), ge1(rxctl)
+mpp55        55        gpio, ge0(rxclk), ge1(rxclk)
+mpp56        56        gpio, ge0(txclkout), ge1(txclkout)
+mpp57        57        gpio, ge0(txctl), ge1(txctl)
+mpp58        58        gpio, led(c0)
+mpp59        59        gpio, led(c1)
+mpp60        60        gpio, uart1(txd), led(c2)
+mpp61        61        gpio, i2c1(sda), uart1(rxd), spi1(cs2), led(p0)
+mpp62        62        gpio, i2c1(sck), led(p1)
+mpp63        63        gpio, ptp(triggen), led(p2)
+mpp64        64        gpio, dram(vttctrl), led(p3)
+mpp65        65        gpio, sata1(prsnt)
+mpp66        66        gpio, ptp(eventreq), spi1(cs3)
diff --git a/Bindings/pinctrl/marvell,armada-38x-pinctrl.txt b/Bindings/pinctrl/marvell,armada-38x-pinctrl.txt
new file mode 100644
index 000000000000..b17c96849fc9
--- /dev/null
+++ b/Bindings/pinctrl/marvell,armada-38x-pinctrl.txt
@@ -0,0 +1,80 @@
+* Marvell Armada 380/385 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6810-pinctrl", "marvell,88f6820-pinctrl" or
+  "marvell,88f6828-pinctrl" depending on the specific variant of the
+  SoC being used.
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name          pins     functions
+================================================================================
+mpp0          0        gpio, ua0(rxd)
+mpp1          1        gpio, ua0(txd)
+mpp2          2        gpio, i2c0(sck)
+mpp3          3        gpio, i2c0(sda)
+mpp4          4        gpio, ge(mdc), ua1(txd), ua0(rts)
+mpp5          5        gpio, ge(mdio), ua1(rxd), ua0(cts)
+mpp6          6        gpio, ge0(txclkout), ge0(crs), dev(cs3)
+mpp7          7        gpio, ge0(txd0), dev(ad9)
+mpp8          8        gpio, ge0(txd1), dev(ad10)
+mpp9          9        gpio, ge0(txd2), dev(ad11)
+mpp10         10       gpio, ge0(txd3), dev(ad12)
+mpp11         11       gpio, ge0(txctl), dev(ad13)
+mpp12         12       gpio, ge0(rxd0), pcie0(rstout), pcie1(rstout) [1], spi0(cs1), dev(ad14)
+mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15)
+mpp14         14       gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1)
+mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi), pcie1(rstout) [1]
+mpp16         16       gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq)
+mpp17         17       gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt)
+mpp18         18       gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0), pcie1(rstout) [1]
+mpp19         19       gpio, ge0(col), ptp(event_req), pcie0(clkreq), sata1(prsnt), ua0(cts)
+mpp20         20       gpio, ge0(txclk), ptp(clk), pcie1(rstout) [1], sata0(prsnt), ua0(rts)
+mpp21         21       gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs)
+mpp22         22       gpio, spi0(mosi), dev(ad0)
+mpp23         23       gpio, spi0(sck), dev(ad2)
+mpp24         24       gpio, spi0(miso), ua0(cts), ua1(rxd), sd0(d4), dev(ready)
+mpp25         25       gpio, spi0(cs0), ua0(rts), ua1(txd), sd0(d5), dev(cs0)
+mpp26         26       gpio, spi0(cs2), i2c1(sck), sd0(d6), dev(cs1)
+mpp27         27       gpio, spi0(cs3), ge1(txclkout), i2c1(sda), sd0(d7), dev(cs2)
+mpp28         28       gpio, ge1(txd0), sd0(clk), dev(ad5)
+mpp29         29       gpio, ge1(txd1), dev(ale0)
+mpp30         30       gpio, ge1(txd2), dev(oen)
+mpp31         31       gpio, ge1(txd3), dev(ale1)
+mpp32         32       gpio, ge1(txctl), dev(wen0)
+mpp33         33       gpio, m(decc_err), dev(ad3)
+mpp34         34       gpio, dev(ad1)
+mpp35         35       gpio, ref(clk_out1), dev(a1)
+mpp36         36       gpio, ptp(trig_gen), dev(a0)
+mpp37         37       gpio, ptp(clk), ge1(rxclk), sd0(d3), dev(ad8)
+mpp38         38       gpio, ptp(event_req), ge1(rxd1), ref(clk_out0), sd0(d0), dev(ad4)
+mpp39         39       gpio, i2c1(sck), ge1(rxd2), ua0(cts), sd0(d1), dev(a2)
+mpp40         40       gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6)
+mpp41         41       gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last)
+mpp42         42       gpio, ua1(txd), ua0(rts), dev(ad7)
+mpp43         43       gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), pcie0(rstout), dev(clkout)
+mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3], pcie0(rstout)
+mpp45         45       gpio, ref(clk_out0), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
+mpp46         46       gpio, ref(clk_out1), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
+mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], spi1(cs2), sata3(prsnt) [2]
+mpp48         48       gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4)
+mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5)
+mpp50         50       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(drx), audio(extclk), sd0(cmd)
+mpp51         51       gpio, tdm2c(dtx), audio(sdo), m(decc_err)
+mpp52         52       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(intn), audio(sdi), sd0(d6)
+mpp53         53       gpio, sata1(prsnt), sata0(prsnt), tdm2c(rstn), audio(bclk), sd0(d7)
+mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), pcie1(rstout) [1], sd0(d3)
+mpp55         55       gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0)
+mpp56         56       gpio, ua1(rts), ge(mdc), m(decc_err), spi1(mosi)
+mpp57         57       gpio, spi1(sck), sd0(clk)
+mpp58         58       gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1)
+mpp59         59       gpio, pcie0(rstout), i2c1(sda), pcie1(rstout) [1], spi1(cs0), sd0(d2)
+
+[1]: only available on 88F6820 and 88F6828
+[2]: only available on 88F6828
diff --git a/Bindings/pinctrl/marvell,orion-pinctrl.txt b/Bindings/pinctrl/marvell,orion-pinctrl.txt
new file mode 100644
index 000000000000..27570a3a1741
--- /dev/null
+++ b/Bindings/pinctrl/marvell,orion-pinctrl.txt
@@ -0,0 +1,91 @@
+* Marvell Orion SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f5181l-pinctrl", "marvell,88f5182-pinctrl",
+              "marvell,88f5281-pinctrl"
+
+- reg: two register areas, the first one describing the first two
+  contiguous MPP registers, and the second one describing the single
+  final MPP register, separated from the previous one.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Orion 88f5181l
+
+name          pins     functions
+================================================================================
+mpp0          0        pcie(rstout), pci(req2), gpio
+mpp1          1        gpio, pci(gnt2)
+mpp2          2        gpio, pci(req3), pci-1(pme)
+mpp3          3        gpio, pci(gnt3)
+mpp4          4        gpio, pci(req4)
+mpp5          5        gpio, pci(gnt4)
+mpp6          6        gpio, pci(req5), pci-1(clk)
+mpp7          7        gpio, pci(gnt5), pci-1(clk)
+mpp8          8        gpio, ge(col)
+mpp9          9        gpio, ge(rxerr)
+mpp10         10       gpio, ge(crs)
+mpp11         11       gpio, ge(txerr)
+mpp12         12       gpio, ge(txd4)
+mpp13         13       gpio, ge(txd5)
+mpp14         14       gpio, ge(txd6)
+mpp15         15       gpio, ge(txd7)
+mpp16         16       ge(rxd4)
+mpp17         17       ge(rxd5)
+mpp18         18       ge(rxd6)
+mpp19         19       ge(rxd7)
+
+* Marvell Orion 88f5182
+
+name          pins     functions
+================================================================================
+mpp0          0        pcie(rstout), pci(req2), gpio
+mpp1          1        gpio, pci(gnt2)
+mpp2          2        gpio, pci(req3), pci-1(pme)
+mpp3          3        gpio, pci(gnt3)
+mpp4          4        gpio, pci(req4), bootnand(re), sata0(prsnt)
+mpp5          5        gpio, pci(gnt4), bootnand(we), sata1(prsnt)
+mpp6          6        gpio, pci(req5), nand(re0), sata0(act)
+mpp7          7        gpio, pci(gnt5), nand(we0), sata1(act)
+mpp8          8        gpio, ge(col)
+mpp9          9        gpio, ge(rxerr)
+mpp10         10       gpio, ge(crs)
+mpp11         11       gpio, ge(txerr)
+mpp12         12       gpio, ge(txd4), nand(re1), sata0(ledprsnt)
+mpp13         13       gpio, ge(txd5), nand(we1), sata1(ledprsnt)
+mpp14         14       gpio, ge(txd6), nand(re2), sata0(ledact)
+mpp15         15       gpio, ge(txd7), nand(we2), sata1(ledact)
+mpp16         16       uart1(rxd), ge(rxd4), gpio
+mpp17         17       uart1(txd), ge(rxd5), gpio
+mpp18         18       uart1(cts), ge(rxd6), gpio
+mpp19         19       uart1(rts), ge(rxd7), gpio
+
+* Marvell Orion 88f5281
+
+name          pins     functions
+================================================================================
+mpp0          0        pcie(rstout), pci(req2), gpio
+mpp1          1        gpio, pci(gnt2)
+mpp2          2        gpio, pci(req3), pci(pme)
+mpp3          3        gpio, pci(gnt3)
+mpp4          4        gpio, pci(req4), bootnand(re)
+mpp5          5        gpio, pci(gnt4), bootnand(we)
+mpp6          6        gpio, pci(req5), nand(re0)
+mpp7          7        gpio, pci(gnt5), nand(we0)
+mpp8          8        gpio, ge(col)
+mpp9          9        gpio, ge(rxerr)
+mpp10         10       gpio, ge(crs)
+mpp11         11       gpio, ge(txerr)
+mpp12         12       gpio, ge(txd4), nand(re1)
+mpp13         13       gpio, ge(txd5), nand(we1)
+mpp14         14       gpio, ge(txd6), nand(re2)
+mpp15         15       gpio, ge(txd7), nand(we2)
+mpp16         16       uart1(rxd), ge(rxd4)
+mpp17         17       uart1(txd), ge(rxd5)
+mpp18         18       uart1(cts), ge(rxd6)
+mpp19         19       uart1(rts), ge(rxd7)
diff --git a/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
new file mode 100644
index 000000000000..2f9c0bd66457
--- /dev/null
+++ b/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -0,0 +1,127 @@
+Device tree binding for NVIDIA Tegra XUSB pad controller
+========================================================
+
+The Tegra XUSB pad controller manages a set of lanes, each of which can be
+assigned to one out of a set of different pads. Some of these pads have an
+associated PHY that must be powered up before the pad can be used.
+
+This document defines the device-specific binding for the XUSB pad controller.
+
+Refer to pinctrl-bindings.txt in this directory for generic information about
+pin controller device tree bindings and ../phy/phy-bindings.txt for details on
+how to describe and reference PHYs in device trees.
+
+Required properties:
+--------------------
+- compatible: should be "nvidia,tegra124-xusb-padctl"
+- reg: Physical base address and length of the controller's registers.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - padctl
+- #phy-cells: Should be 1. The specifier is the index of the PHY to reference.
+  See <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> for the list of valid values.
+
+Lane muxing:
+------------
+
+Child nodes contain the pinmux configurations following the conventions from
+the pinctrl-bindings.txt document. Typically a single, static configuration is
+given and applied at boot time.
+
+Each subnode describes groups of lanes along with parameters and pads that
+they should be assigned to. The name of these subnodes is not important. All
+subnodes should be parsed solely based on their content.
+
+Each subnode only applies the parameters that are explicitly listed. In other
+words, if a subnode that lists a function but no pin configuration parameters
+implies no information about any pin configuration parameters. Similarly, a
+subnode that describes only an IDDQ parameter implies no information about
+what function the pins are assigned to. For this reason even seemingly boolean
+values are actually tristates in this binding: unspecified, off or on.
+Unspecified is represented as an absent property, and off/on are represented
+as integer values 0 and 1.
+
+Required properties:
+- nvidia,lanes: An array of strings. Each string is the name of a lane.
+
+Optional properties:
+- nvidia,function: A string that is the name of the function (pad) that the
+  pin or group should be assigned to. Valid values for function names are
+  listed below.
+- nvidia,iddq: Enables IDDQ mode of the lane. (0: no, 1: yes)
+
+Note that not all of these properties are valid for all lanes. Lanes can be
+divided into three groups:
+
+  - otg-0, otg-1, otg-2:
+
+    Valid functions for this group are: "snps", "xusb", "uart", "rsvd".
+
+    The nvidia,iddq property does not apply to this group.
+
+  - ulpi-0, hsic-0, hsic-1:
+
+    Valid functions for this group are: "snps", "xusb".
+
+    The nvidia,iddq property does not apply to this group.
+
+  - pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, sata-0:
+
+    Valid functions for this group are: "pcie", "usb3", "sata", "rsvd".
+
+
+Example:
+========
+
+SoC file extract:
+-----------------
+
+	padctl@0,7009f000 {
+		compatible = "nvidia,tegra124-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		#phy-cells = <1>;
+	};
+
+Board file extract:
+-------------------
+
+	pcie-controller@0,01003000 {
+		...
+
+		phys = <&padctl 0>;
+		phy-names = "pcie";
+
+		...
+	};
+
+	...
+
+	padctl: padctl@0,7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			usb3 {
+				nvidia,lanes = "pcie-0", "pcie-1";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie {
+				nvidia,lanes = "pcie-2", "pcie-3",
+					       "pcie-4";
+				nvidia,function = "pcie";
+				nvidia,iddq = <0>;
+			};
+
+			sata {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "sata";
+				nvidia,iddq = <0>;
+			};
+		};
+	};
diff --git a/Bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
new file mode 100644
index 000000000000..0211c6d8a522
--- /dev/null
+++ b/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -0,0 +1,88 @@
+Qualcomm APQ8064 TLMM block
+
+Required properties:
+- compatible: "qcom,apq8064-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+                The first cell is the gpio pin number and the
+                second cell is used for optional parameters.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+ pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ output-low, output-high.
+
+Non-empty subnodes must specify the 'pins' property.
+
+Valid values for pins are:
+  gpio0-gpio89
+
+Valid values for function are:
+  cam_mclk, codec_mic_i2s, codec_spkr_i2s, gpio, gsbi1, gsbi2, gsbi3, gsbi4,
+  gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6,
+  gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1,
+  gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm,
+  riva_wlan, sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic,
+
+Example:
+
+	msmgpio: pinctrl@800000 {
+		compatible = "qcom,apq8064-pinctrl";
+		reg = <0x800000 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 32 0x4>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsbi5_uart_default>;
+
+		gsbi5_uart_default: gsbi5_uart_default {
+			mux {
+				pins = "gpio51", "gpio52";
+				function = "gsbi5";
+			};
+
+			tx {
+				pins = "gpio51";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio52";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};
diff --git a/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt
new file mode 100644
index 000000000000..e33e4dcdce79
--- /dev/null
+++ b/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -0,0 +1,95 @@
+Qualcomm IPQ8064 TLMM block
+
+Required properties:
+- compatible: "qcom,ipq8064-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+                The first cell is the gpio pin number and the
+                second cell is used for optional parameters.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+ pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength,
+ output-low, output-high.
+
+Non-empty subnodes must specify the 'pins' property.
+
+Valid values for qcom,pins are:
+  gpio0-gpio68
+   Supports mux, bias, and drive-strength
+
+  sdc3_clk, sdc3_cmd, sdc3_data
+   Supports bias and drive-strength
+
+
+Valid values for function are:
+  mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5,
+  gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1,
+  spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata,
+  pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt,
+  pcie1_clk_req, pcie2_rst, pcie2_prsnt, pcie2_pwren_n, pcie2_pwren,
+  pcie2_pwrflt, pcie2_clk_req, pcie3_rst, pcie3_prsnt, pcie3_pwren_n,
+  pcie3_pwren, pcie3_pwrflt, pcie3_clk_req, ps_hold
+
+Example:
+
+	pinmux: pinctrl@800000 {
+		compatible = "qcom,ipq8064-pinctrl";
+		reg = <0x800000 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 32 0x4>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsbi5_uart_default>;
+
+		gsbi5_uart_default: gsbi5_uart_default {
+			mux {
+				pins = "gpio18", "gpio19";
+				function = "gsbi5";
+			};
+
+			tx {
+				pins = "gpio18";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio19";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};
diff --git a/Bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
new file mode 100644
index 000000000000..93b7de91b9f6
--- /dev/null
+++ b/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
@@ -0,0 +1,181 @@
+Qualcomm MSM8960 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8960 platform.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,msm8960-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.  Valid pins are:
+		    gpio0-gpio151,
+		    sdc1_clk,
+		    sdc1_cmd,
+		    sdc1_data
+		    sdc3_clk,
+		    sdc3_cmd,
+		    sdc3_data
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+		    audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2,
+		    codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking,
+		    gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+		    gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a,
+		    gp_pdm_0b, gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gpio,
+		    gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n,
+		    gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
+		    gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l,
+		    gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l,
+		    gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10,
+		    gsbi11, gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n,
+		    gsbi11_spi_cs2a_n, gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n,
+		    gsbi12, hdmi_cec, hdmi_ddc_clock, hdmi_ddc_data,
+		    hdmi_hot_plug_detect, hsic, mdp_vsync, mi2s, mic_i2s,
+		    pmb_clk, pmb_ext_ctrl, ps_hold, rpm_wdog, sdc2, sdc4, sdc5,
+		    slimbus1, slimbus2, spkr_i2s, ssbi1, ssbi2, ssbi_ext_gps,
+		    ssbi_pmic2, ssbi_qpa1, ssbi_ts, tsif1, tsif2, ts_eoc,
+		    usb_fs1, usb_fs1_oe, usb_fs1_oe_n, usb_fs2, usb_fs2_oe,
+		    usb_fs2_oe_n, vfe_camif_timer1_a, vfe_camif_timer1_b,
+		    vfe_camif_timer2, vfe_camif_timer3_a, vfe_camif_timer3_b,
+		    vfe_camif_timer4_a, vfe_camif_timer4_b, vfe_camif_timer4_c,
+		    vfe_camif_timer5_a, vfe_camif_timer5_b, vfe_camif_timer6_a,
+		    vfe_camif_timer6_b, vfe_camif_timer6_c, vfe_camif_timer7_a,
+		    vfe_camif_timer7_b, vfe_camif_timer7_c, wlan
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+		    Not valid for sdc pins.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+		    Not valid for sdc pins.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	msmgpio: pinctrl@800000 {
+		compatible = "qcom,msm8960-pinctrl";
+		reg = <0x800000 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 16 0x4>;
+
+		gsbi8_uart: gsbi8-uart {
+			mux {
+				pins = "gpio34", "gpio35";
+				function = "gsbi8";
+			};
+
+			tx {
+				pins = "gpio34";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio35";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};
diff --git a/Bindings/power/reset/keystone-reset.txt b/Bindings/power/reset/keystone-reset.txt
new file mode 100644
index 000000000000..c82f12e2d85c
--- /dev/null
+++ b/Bindings/power/reset/keystone-reset.txt
@@ -0,0 +1,67 @@
+* Device tree bindings for Texas Instruments keystone reset
+
+This node is intended to allow SoC reset in case of software reset
+of selected watchdogs.
+
+The Keystone SoCs can contain up to 4 watchdog timers to reset
+SoC. Each watchdog timer event input is connected to the Reset Mux
+block. The Reset Mux block can be configured to cause reset or not.
+
+Additionally soft or hard reset can be configured.
+
+Required properties:
+
+- compatible:		ti,keystone-reset
+
+- ti,syscon-pll:	phandle/offset pair. The phandle to syscon used to
+			access pll controller registers and the offset to use
+			reset control registers.
+
+- ti,syscon-dev:	phandle/offset pair. The phandle to syscon used to
+			access device state control registers and the offset
+			in order to use mux block registers for all watchdogs.
+
+Optional properties:
+
+- ti,soft-reset:	Boolean option indicating soft reset.
+			By default hard reset is used.
+
+- ti,wdt-list:		WDT list that can cause SoC reset. It's not related
+			to WDT driver, it's just needed to enable a SoC related
+			reset that's triggered by one of WDTs. The list is
+			in format: <0>, <2>; It can be in random order and
+			begins from 0 to 3, as keystone can contain up to 4 SoC
+			reset watchdogs and can be in random order.
+
+Example 1:
+Setup keystone reset so that in case software reset or
+WDT0 is triggered it issues hard reset for SoC.
+
+pllctrl: pll-controller@02310000 {
+	compatible = "ti,keystone-pllctrl", "syscon";
+	reg = <0x02310000 0x200>;
+};
+
+devctrl: device-state-control@02620000 {
+	compatible = "ti,keystone-devctrl", "syscon";
+	reg = <0x02620000 0x1000>;
+};
+
+rstctrl: reset-controller {
+	compatible = "ti,keystone-reset";
+	ti,syscon-pll = <&pllctrl 0xe4>;
+	ti,syscon-dev = <&devctrl 0x328>;
+	ti,wdt-list = <0>;
+};
+
+Example 2:
+Setup keystone reset so that in case of software reset or
+WDT0 or WDT2 is triggered it issues soft reset for SoC.
+
+rstctrl: reset-controller {
+	compatible = "ti,keystone-reset";
+	ti,syscon-pll = <&pllctrl 0xe4>;
+	ti,syscon-dev = <&devctrl 0x328>;
+	ti,wdt-list = <0>, <2>;
+	ti,soft-reset;
+};
diff --git a/Bindings/power/rx51-battery.txt b/Bindings/power/rx51-battery.txt
new file mode 100644
index 000000000000..90438453db58
--- /dev/null
+++ b/Bindings/power/rx51-battery.txt
@@ -0,0 +1,25 @@
+Binding for Nokia N900 battery
+
+The Nokia N900 battery status can be read via the TWL4030's A/D converter.
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "nokia,n900-battery"
+- io-channels: Should contain IIO channel specifiers
+               for each element in io-channel-names.
+- io-channel-names: Should contain the following values:
+ * "temp" - The ADC channel for temperature reading
+ * "bsi"  - The ADC channel for battery size identification
+ * "vbat" - The ADC channel to measure the battery voltage
+
+Example from Nokia N900:
+
+battery: n900-battery {
+	compatible = "nokia,n900-battery";
+	io-channels = <&twl4030_madc 0>,
+		      <&twl4030_madc 4>,
+		      <&twl4030_madc 12>;
+	io-channel-names = "temp",
+			   "bsi",
+			   "vbat";
+};
diff --git a/Bindings/power_supply/axxia-reset.txt b/Bindings/power_supply/axxia-reset.txt
new file mode 100644
index 000000000000..47e720d249d2
--- /dev/null
+++ b/Bindings/power_supply/axxia-reset.txt
@@ -0,0 +1,20 @@
+Axxia Restart Driver
+
+This driver can do reset of the Axxia SoC. It uses the registers in the syscon
+block to initiate a chip reset.
+
+Required Properties:
+  -compatible: "lsi,axm55xx-reset"
+  -syscon: phandle to the syscon node.
+
+Example:
+
+	syscon: syscon@2010030000 {
+		compatible = "lsi,axxia-syscon", "syscon";
+		reg = <0x20 0x10030000 0 0x2000>;
+	};
+
+	reset: reset@2010031000 {
+		compatible = "lsi,axm55xx-reset";
+		syscon = <&syscon>;
+	};
diff --git a/Bindings/powerpc/4xx/akebono.txt b/Bindings/powerpc/4xx/akebono.txt
new file mode 100644
index 000000000000..db939210e29d
--- /dev/null
+++ b/Bindings/powerpc/4xx/akebono.txt
@@ -0,0 +1,54 @@
+
+IBM Akebono board device tree
+=============================
+
+The IBM Akebono board is a development board for the PPC476GTR SoC.
+
+0) The root node
+
+   Required properties:
+
+   - model : "ibm,akebono".
+   - compatible : "ibm,akebono" , "ibm,476gtr".
+
+1.a) The Secure Digital Host Controller Interface (SDHCI) node
+
+  Represent the Secure Digital Host Controller Interfaces.
+
+  Required properties:
+
+   - compatible : should be "ibm,476gtr-sdhci","generic-sdhci".
+   - reg : should contain the SDHCI registers location and length.
+   - interrupt-parent : a phandle for the interrupt controller.
+   - interrupts : should contain the SDHCI interrupt.
+
+1.b) The Advanced Host Controller Interface (AHCI) SATA node
+
+  Represents the advanced host controller SATA interface.
+
+  Required properties:
+
+   - compatible : should be "ibm,476gtr-ahci".
+   - reg : should contain the AHCI registers location and length.
+   - interrupt-parent : a phandle for the interrupt controller.
+   - interrupts : should contain the AHCI interrupt.
+
+1.c) The FPGA node
+
+  The Akebono board stores some board information such as the revision
+  number in an FPGA which is represented by this node.
+
+  Required properties:
+
+   - compatible : should be "ibm,akebono-fpga".
+   - reg : should contain the FPGA registers location and length.
+
+1.d) The AVR node
+
+  The Akebono board has an Atmel AVR microprocessor attached to the I2C
+  bus as a power controller for the board.
+
+  Required properties:
+
+   - compatible : should be "ibm,akebono-avr".
+   - reg : should contain the I2C bus address for the AVR.
diff --git a/Bindings/powerpc/4xx/hsta.txt b/Bindings/powerpc/4xx/hsta.txt
new file mode 100644
index 000000000000..c737c8338705
--- /dev/null
+++ b/Bindings/powerpc/4xx/hsta.txt
@@ -0,0 +1,19 @@
+
+ppc476gtr High Speed Serial Assist (HSTA) node
+==============================================
+
+The 476gtr SoC contains a high speed serial assist module attached
+between the plb4 and plb6 system buses to provide high speed data
+transfer between memory and system peripherals as well as support for
+PCI message signalled interrupts.
+
+Currently only the MSI support is used by Linux using the following
+device tree entries:
+
+Require properties:
+- compatible		: "ibm,476gtr-hsta-msi", "ibm,hsta-msi"
+- reg			: register mapping for the HSTA MSI space
+- interrupt-parent	: parent controller for mapping interrupts
+- interrupts		: ordered interrupt mapping for each MSI in the register
+			  space. The first interrupt should be associated with a
+			  register offset of 0x00, the second to 0x10, etc.
diff --git a/Bindings/powerpc/fsl/ccf.txt b/Bindings/powerpc/fsl/ccf.txt
new file mode 100644
index 000000000000..454da7e08acd
--- /dev/null
+++ b/Bindings/powerpc/fsl/ccf.txt
@@ -0,0 +1,46 @@
+Freescale CoreNet Coherency Fabric(CCF) Device Tree Binding
+
+DESCRIPTION
+
+The CoreNet coherency fabric is a fabric-oriented, connectivity infrastructure
+that enables the implementation of coherent, multicore systems.
+
+Required properties:
+
+- compatible: <string list>
+		fsl,corenet1-cf - CoreNet coherency fabric version 1.
+		Example chips: T4240, B4860
+
+		fsl,corenet2-cf - CoreNet coherency fabric version 2.
+		Example chips: P5040, P5020, P4080, P3041, P2041
+
+		fsl,corenet-cf - Used to represent the common registers
+		between CCF version 1 and CCF version 2.  This compatible
+		is retained for compatibility reasons, as it was already
+		used for both CCF version 1 chips and CCF version 2
+		chips.  It should be specified after either
+		"fsl,corenet1-cf" or "fsl,corenet2-cf".
+
+- reg: <prop-encoded-array>
+		A standard property. Represents the CCF registers.
+
+- interrupts: <prop-encoded-array>
+		Interrupt mapping for CCF error interrupt.
+
+- fsl,ccf-num-csdids: <u32>
+		Specifies the number of Coherency Subdomain ID Port Mapping
+		Registers that are supported by the CCF.
+
+- fsl,ccf-num-snoopids: <u32>
+		Specifies the number of Snoop ID Port Mapping Registers that
+		are supported by CCF.
+
+Example:
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
diff --git a/Bindings/powerpc/fsl/l2cache.txt b/Bindings/powerpc/fsl/l2cache.txt
new file mode 100644
index 000000000000..c41b2187eaa8
--- /dev/null
+++ b/Bindings/powerpc/fsl/l2cache.txt
@@ -0,0 +1,23 @@
+Freescale L2 Cache Controller
+
+L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms.
+The cache bindings explained below are ePAPR compliant
+
+Required Properties:
+
+- compatible	: Should include "fsl,chip-l2-cache-controller" and "cache"
+		  where chip is the processor (bsc9132, npc8572 etc.)
+- reg		: Address and size of L2 cache controller registers
+- cache-size	: Size of the entire L2 cache
+- interrupts	: Error interrupt of L2 controller
+- cache-line-size : Size of L2 cache lines
+
+Example:
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9132-l2-cache-controller", "cache";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>; // 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 1 0>;
+	};
diff --git a/Bindings/powerpc/fsl/mem-ctrlr.txt b/Bindings/powerpc/fsl/mem-ctrlr.txt
new file mode 100644
index 000000000000..f87856faf1ab
--- /dev/null
+++ b/Bindings/powerpc/fsl/mem-ctrlr.txt
@@ -0,0 +1,27 @@
+Freescale DDR memory controller
+
+Properties:
+
+- compatible	: Should include "fsl,chip-memory-controller" where
+		  chip is the processor (bsc9132, mpc8572 etc.), or
+		  "fsl,qoriq-memory-controller".
+- reg		: Address and size of DDR controller registers
+- interrupts	: Error interrupt of DDR controller
+
+Example 1:
+
+	memory-controller@2000 {
+		compatible = "fsl,bsc9132-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+
+Example 2:
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
diff --git a/Bindings/pwm/bcm-kona-pwm.txt b/Bindings/pwm/bcm-kona-pwm.txt
new file mode 100644
index 000000000000..8eae9fe7841c
--- /dev/null
+++ b/Bindings/pwm/bcm-kona-pwm.txt
@@ -0,0 +1,21 @@
+Broadcom Kona PWM controller device tree bindings
+
+This controller has 6 channels.
+
+Required Properties :
+- compatible: should contain "brcm,kona-pwm"
+- reg: physical base address and length of the controller's registers
+- clocks: phandle + clock specifier pair for the external clock
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a
+  description of the cells format.
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
+
+Example:
+
+pwm: pwm@3e01a000 {
+	compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+	reg = <0x3e01a000 0xc4>;
+	clocks = <&pwm_clk>;
+	#pwm-cells = <3>;
+};
diff --git a/Bindings/pwm/cirrus,clps711x-pwm.txt b/Bindings/pwm/cirrus,clps711x-pwm.txt
new file mode 100644
index 000000000000..a183db48f910
--- /dev/null
+++ b/Bindings/pwm/cirrus,clps711x-pwm.txt
@@ -0,0 +1,16 @@
+* Cirris Logic CLPS711X PWM controller
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-pwm".
+- reg: Physical base address and length of the controller's registers.
+- clocks: phandle + clock specifier pair of the PWM reference clock.
+- #pwm-cells: Should be 1. The cell specifies the index of the channel.
+
+Example:
+	pwm: pwm@80000400 {
+		compatible = "cirrus,ep7312-pwm",
+			     "cirrus,clps711x-pwm";
+		reg = <0x80000400 0x4>;
+		clocks = <&clks 8>;
+		#pwm-cells = <1>;
+	};
diff --git a/Bindings/pwm/pwm-fsl-ftm.txt b/Bindings/pwm/pwm-fsl-ftm.txt
new file mode 100644
index 000000000000..0bda229a6171
--- /dev/null
+++ b/Bindings/pwm/pwm-fsl-ftm.txt
@@ -0,0 +1,35 @@
+Freescale FlexTimer Module (FTM) PWM controller
+
+Required properties:
+- compatible: Should be "fsl,vf610-ftm-pwm".
+- reg: Physical base address and length of the controller's registers
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
+  the cells format.
+- clock-names: Should include the following module clock source entries:
+    "ftm_sys" (module clock, also can be used as counter clock),
+    "ftm_ext" (external counter clock),
+    "ftm_fix" (fixed counter clock),
+    "ftm_cnt_clk_en" (external and fixed counter clock enable/disable).
+- clocks: Must contain a phandle and clock specifier for each entry in
+  clock-names, please see clock/clock-bindings.txt for details of the property
+  values.
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+  See pinctrl/pinctrl-bindings.txt for details of the property values.
+
+
+Example:
+
+pwm0: pwm@40038000 {
+		compatible = "fsl,vf610-ftm-pwm";
+		reg = <0x40038000 0x1000>;
+		#pwm-cells = <3>;
+		clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+		clocks = <&clks VF610_CLK_FTM0>,
+			<&clks VF610_CLK_FTM0_EXT_SEL>,
+			<&clks VF610_CLK_FTM0_FIX_SEL>,
+			<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm0_1>;
+};
diff --git a/Bindings/pwm/pwm-rockchip.txt b/Bindings/pwm/pwm-rockchip.txt
new file mode 100644
index 000000000000..d47d15a6a298
--- /dev/null
+++ b/Bindings/pwm/pwm-rockchip.txt
@@ -0,0 +1,20 @@
+Rockchip PWM controller
+
+Required properties:
+ - compatible: should be "rockchip,<name>-pwm"
+   "rockchip,rk2928-pwm": found on RK29XX,RK3066 and RK3188 SoCs
+   "rockchip,rk3288-pwm": found on RK3288 SoC
+   "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
+ - reg: physical base address and length of the controller's registers
+ - clocks: phandle and clock specifier of the PWM reference clock
+ - #pwm-cells: should be 2. See pwm.txt in this directory for a
+   description of the cell format.
+
+Example:
+
+	pwm0: pwm@20030000 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20030000 0x10>;
+		clocks = <&cru PCLK_PWM01>;
+		#pwm-cells = <2>;
+	};
diff --git a/Bindings/pwm/pwm-st.txt b/Bindings/pwm/pwm-st.txt
new file mode 100644
index 000000000000..84d2fb807d3c
--- /dev/null
+++ b/Bindings/pwm/pwm-st.txt
@@ -0,0 +1,41 @@
+STMicroelectronics PWM driver bindings
+--------------------------------------
+
+Required parameters:
+- compatible :		"st,pwm"
+- #pwm-cells : 		Number of cells used to specify a PWM. First cell
+			specifies the per-chip index of the PWM to use and the
+			second cell is the period in nanoseconds - fixed to 2
+			for STiH41x.
+- reg :			Physical base address and length of the controller's
+			registers.
+- pinctrl-names: 	Set to "default".
+- pinctrl-0: 		List of phandles pointing to pin configuration nodes
+			for PWM module.
+			For Pinctrl properties, please refer to [1].
+- clock-names: 		Set to "pwm".
+- clocks: 		phandle of the clock used by the PWM module.
+			For Clk properties, please refer to [2].
+
+Optional properties:
+- st,pwm-num-chan:	Number of available channels. If not passed, the driver
+			will consider single channel by default.
+
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Example:
+
+pwm1: pwm@fe510000 {
+	compatible = "st,pwm";
+	reg = <0xfe510000 0x68>;
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1_chan0_default
+		     &pinctrl_pwm1_chan1_default
+		     &pinctrl_pwm1_chan2_default
+		     &pinctrl_pwm1_chan3_default>;
+	clocks = <&clk_sysin>;
+	clock-names = "pwm";
+	st,pwm-num-chan = <4>;
+};
diff --git a/Bindings/regulator/ltc3589.txt b/Bindings/regulator/ltc3589.txt
new file mode 100644
index 000000000000..801053036146
--- /dev/null
+++ b/Bindings/regulator/ltc3589.txt
@@ -0,0 +1,99 @@
+Linear Technology LTC3589, LTC3589-1, and LTC3589-2 8-output regulators
+
+Required properties:
+- compatible: "lltc,ltc3589", "lltc,ltc3589-1" or "lltc,ltc3589-2"
+- reg: I2C slave address
+
+Required child node:
+- regulators: Contains eight regulator child nodes sw1, sw2, sw3, bb-out,
+  ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
+  documented in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Each regulator is defined using the standard binding for regulators. The
+nodes for sw1, sw2, sw3, bb-out, ldo1, and ldo2 additionally need to specify
+the resistor values of their external feedback voltage dividers:
+
+Required properties (not on ldo3, ldo4):
+- lltc,fb-voltage-divider: An array of two integers containing the resistor
+  values R1 and R2 of the feedback voltage divider in ohms.
+
+Regulators sw1, sw2, sw3, and ldo2 can regulate the feedback reference from
+0.3625 V to 0.75 V in 12.5 mV steps. The output voltage thus ranges between
+0.3625 * (1 + R1/R2) V and 0.75 * (1 + R1/R2) V. Regulators bb-out and ldo1
+have a fixed 0.8 V reference and thus output 0.8 * (1 + R1/R2) V. The ldo3
+regulator is fixed to 1.8 V on LTC3589 and to 2.8 V on LTC3589-1,2. The ldo4
+regulator can output between 1.8 V and 3.3 V on LTC3589 and between 1.2 V
+and 3.2 V on LTC3589-1,2 in four steps. The ldo1 standby regulator can not
+be disabled and thus should have the regulator-always-on property set.
+
+Example:
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-1";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
diff --git a/Bindings/regulator/pbias-regulator.txt b/Bindings/regulator/pbias-regulator.txt
new file mode 100644
index 000000000000..32aa26f1e434
--- /dev/null
+++ b/Bindings/regulator/pbias-regulator.txt
@@ -0,0 +1,27 @@
+PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
+
+Required properties:
+- compatible:
+  - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7.
+- reg: pbias register offset from syscon base and size of pbias register.
+- syscon : phandle of the system control module
+- regulator-name : should be
+			pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs
+			pbias_sim_omap3 for OMAP3 SoCs
+			pbias_mmc_omap4 for OMAP4 SoCs
+			pbias_mmc_omap5 for OMAP5 and DRA7 SoC
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0 0x4>;
+			syscon = <&omap5_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
diff --git a/Bindings/regulator/tps65218.txt b/Bindings/regulator/tps65218.txt
new file mode 100644
index 000000000000..fccc1d24af58
--- /dev/null
+++ b/Bindings/regulator/tps65218.txt
@@ -0,0 +1,23 @@
+TPS65218 family of regulators
+
+Required properties:
+For tps65218 regulators/LDOs
+- compatible:
+  - "ti,tps65218-dcdc1" for DCDC1
+  - "ti,tps65218-dcdc2" for DCDC2
+  - "ti,tps65218-dcdc3" for DCDC3
+  - "ti,tps65218-dcdc4" for DCDC4
+  - "ti,tps65218-dcdc5" for DCDC5
+  - "ti,tps65218-dcdc6" for DCDC6
+  - "ti,tps65218-ldo1" for LDO1
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+	xyz: regulator@0 {
+		compatible = "ti,tps65218-dcdc1";
+		regulator-min-microvolt  = <1000000>;
+		regulator-max-microvolt  = <3000000>;
+	};
diff --git a/Bindings/reserved-memory/reserved-memory.txt b/Bindings/reserved-memory/reserved-memory.txt
new file mode 100644
index 000000000000..3da0ebdba8d9
--- /dev/null
+++ b/Bindings/reserved-memory/reserved-memory.txt
@@ -0,0 +1,133 @@
+*** Reserved memory regions ***
+
+Reserved memory is specified as a node under the /reserved-memory node.
+The operating system shall exclude reserved memory from normal usage
+one can create child nodes describing particular reserved (excluded from
+normal use) memory regions. Such memory regions are usually designed for
+the special usage by various device drivers.
+
+Parameters for each memory region can be encoded into the device tree
+with the following nodes:
+
+/reserved-memory node
+---------------------
+#address-cells, #size-cells (required) - standard definition
+    - Should use the same values as the root node
+ranges (required) - standard definition
+    - Should be empty
+
+/reserved-memory/ child nodes
+-----------------------------
+Each child of the reserved-memory node specifies one or more regions of
+reserved memory. Each child node may either use a 'reg' property to
+specify a specific range of reserved memory, or a 'size' property with
+optional constraints to request a dynamically allocated block of memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). Unit
+address (@<address>) should be appended to the name if the node is a
+static allocation.
+
+Properties:
+Requires either a) or b) below.
+a) static allocation
+   reg (required) - standard definition
+b) dynamic allocation
+   size (required) - length based on parent's #size-cells
+                   - Size in bytes of memory to reserve.
+   alignment (optional) - length based on parent's #size-cells
+                        - Address boundary for alignment of allocation.
+   alloc-ranges (optional) - prop-encoded-array (address, length pairs).
+                           - Specifies regions of memory that are
+                             acceptable to allocate from.
+
+If both reg and size are present, then the reg property takes precedence
+and size is ignored.
+
+Additional properties:
+compatible (optional) - standard definition
+    - may contain the following strings:
+        - shared-dma-pool: This indicates a region of memory meant to be
+          used as a shared pool of DMA buffers for a set of devices. It can
+          be used by an operating system to instanciate the necessary pool
+          management subsystem if necessary.
+        - vendor specific string in the form <vendor>,[<device>-]<usage>
+no-map (optional) - empty property
+    - Indicates the operating system must not create a virtual mapping
+      of the region as part of its standard mapping of system memory,
+      nor permit speculative access to it under any circumstances other
+      than under the control of the device driver using the region.
+reusable (optional) - empty property
+    - The operating system can use the memory in this region with the
+      limitation that the device driver(s) owning the region need to be
+      able to reclaim it back. Typically that means that the operating
+      system can use that region to store volatile or cached data that
+      can be otherwise regenerated or migrated elsewhere.
+
+Linux implementation note:
+- If a "linux,cma-default" property is present, then Linux will use the
+  region for the default pool of the contiguous memory allocator.
+
+Device node references to reserved memory
+-----------------------------------------
+Regions in the /reserved-memory node may be referenced by other device
+nodes by adding a memory-region property to the device node.
+
+memory-region (optional) - phandle, specifier pairs to children of /reserved-memory
+
+Example
+-------
+This example defines 3 contiguous regions are defined for Linux kernel:
+one default of all device drivers (named linux,cma@72000000 and 64MiB in size),
+one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and
+one for multimedia processing (named multimedia-memory@77000000, 64MiB).
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x4000000>;
+			alignment = <0x2000>;
+			linux,cma-default;
+		};
+
+		display_reserved: framebuffer@78000000 {
+			reg = <0x78000000 0x800000>;
+		};
+
+		multimedia_reserved: multimedia@77000000 {
+			compatible = "acme,multimedia-memory";
+			reg = <0x77000000 0x4000000>;
+		};
+	};
+
+	/* ... */
+
+	fb0: video@12300000 {
+		memory-region = <&display_reserved>;
+		/* ... */
+	};
+
+	scaler: scaler@12500000 {
+		memory-region = <&multimedia_reserved>;
+		/* ... */
+	};
+
+	codec: codec@12600000 {
+		memory-region = <&multimedia_reserved>;
+		/* ... */
+	};
+};
diff --git a/Bindings/reset/allwinner,sunxi-clock-reset.txt b/Bindings/reset/allwinner,sunxi-clock-reset.txt
new file mode 100644
index 000000000000..c8f775714887
--- /dev/null
+++ b/Bindings/reset/allwinner,sunxi-clock-reset.txt
@@ -0,0 +1,21 @@
+Allwinner sunxi Peripheral Reset Controller
+===========================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be one of the following:
+  "allwinner,sun6i-a31-ahb1-reset"
+  "allwinner,sun6i-a31-clock-reset"
+- reg: should be register base and length as documented in the
+  datasheet
+- #reset-cells: 1, see below
+
+example:
+
+ahb1_rst: reset@01c202c0 {
+	#reset-cells = <1>;
+	compatible = "allwinner,sun6i-a31-ahb1-reset";
+	reg = <0x01c202c0 0xc>;
+};
diff --git a/Bindings/reset/sirf,rstc.txt b/Bindings/reset/sirf,rstc.txt
new file mode 100644
index 000000000000..0505de742d30
--- /dev/null
+++ b/Bindings/reset/sirf,rstc.txt
@@ -0,0 +1,42 @@
+CSR SiRFSoC Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "sirf,prima2-rstc" or "sirf,marco-rstc"
+- reg: should be register base and length as documented in the
+  datasheet
+- #reset-cells: 1, see below
+
+example:
+
+rstc: reset-controller@88010000 {
+	compatible = "sirf,prima2-rstc";
+	reg = <0x88010000 0x1000>;
+	#reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The reset controller(rstc) manages various reset sources. This module provides
+reset signals for most blocks in system. Those device nodes should specify the
+reset line on the rstc in their resets property, containing a phandle to the
+rstc device node and a RESET_INDEX specifying which module to reset, as described
+in reset.txt.
+
+For SiRFSoC, RESET_INDEX is just reset_bit defined in SW_RST0 and SW_RST1 registers.
+For modules whose rest_bit is in SW_RST0, its RESET_INDEX is 0~31. For modules whose
+rest_bit is in SW_RST1, its RESET_INDEX is 32~63.
+
+example:
+
+vpp@90020000 {
+	compatible = "sirf,prima2-vpp";
+	reg = <0x90020000 0x10000>;
+	interrupts = <31>;
+	clocks = <&clks 35>;
+	resets = <&rstc 6>;
+};
diff --git a/Bindings/reset/socfpga-reset.txt b/Bindings/reset/socfpga-reset.txt
new file mode 100644
index 000000000000..32c1c8bfd5dc
--- /dev/null
+++ b/Bindings/reset/socfpga-reset.txt
@@ -0,0 +1,13 @@
+Altera SOCFPGA Reset Manager
+
+Required properties:
+- compatible : "altr,rst-mgr"
+- reg : Should contain 1 register ranges(address and length)
+- #reset-cells: 1
+
+Example:
+	 rstmgr@ffd05000 {
+		#reset-cells = <1>;
+		compatible = "altr,rst-mgr";
+		reg = <0xffd05000 0x1000>;
+	};
diff --git a/Bindings/reset/st,sti-powerdown.txt b/Bindings/reset/st,sti-powerdown.txt
new file mode 100644
index 000000000000..5ab26b7e9d35
--- /dev/null
+++ b/Bindings/reset/st,sti-powerdown.txt
@@ -0,0 +1,47 @@
+STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable on-chip peripheral controllers such as USB and SATA, using
+"powerdown" control bits found in the STi family SoC system configuration
+registers. These have been grouped together into a single reset controller
+device for convenience.
+
+The actual action taken when powerdown is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers and after an assert/deassert sequence the hardware's previous state
+may no longer be valid.
+
+Please refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,<chip>-powerdown"
+	ex: "st,stih415-powerdown", "st,stih416-powerdown"
+- #reset-cells: 1, see below
+
+example:
+
+	powerdown: powerdown-controller {
+		#reset-cells = <1>;
+		compatible = "st,stih415-powerdown";
+	};
+
+
+Specifying powerdown control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the powerdown device node and an
+index specifying which channel to use, as described in reset.txt
+
+example:
+
+	usb1: usb@fe200000 {
+		resets	= <&powerdown STIH41X_USB1_POWERDOWN>;
+	};
+
+Macro definitions for the supported reset channels can be found in:
+
+include/dt-bindings/reset-controller/stih415-resets.h
+include/dt-bindings/reset-controller/stih416-resets.h
diff --git a/Bindings/reset/st,sti-softreset.txt b/Bindings/reset/st,sti-softreset.txt
new file mode 100644
index 000000000000..a8d3d3c25ca2
--- /dev/null
+++ b/Bindings/reset/st,sti-softreset.txt
@@ -0,0 +1,46 @@
+STMicroelectronics STi family Sysconfig Peripheral SoftReset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable on-chip peripheral controllers such as USB and SATA, using
+"softreset" control bits found in the STi family SoC system configuration
+registers.
+
+The actual action taken when softreset is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers and after an assert/deassert sequence the hardware's previous state
+may no longer be valid.
+
+Please refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,<chip>-softreset" example:
+	"st,stih415-softreset" or "st,stih416-softreset";
+- #reset-cells: 1, see below
+
+example:
+
+	softreset: softreset-controller {
+		#reset-cells = <1>;
+		compatible = "st,stih415-softreset";
+	};
+
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the softreset device node and an
+index specifying which channel to use, as described in reset.txt
+
+example:
+
+	ethernet0{
+		resets			= <&softreset STIH415_ETH0_SOFTRESET>;
+	};
+
+Macro definitions for the supported reset channels can be found in:
+
+include/dt-bindings/reset-controller/stih415-resets.h
+include/dt-bindings/reset-controller/stih416-resets.h
diff --git a/Bindings/rtc/xgene-rtc.txt b/Bindings/rtc/xgene-rtc.txt
new file mode 100644
index 000000000000..fd195c358446
--- /dev/null
+++ b/Bindings/rtc/xgene-rtc.txt
@@ -0,0 +1,28 @@
+* APM X-Gene Real Time Clock
+
+RTC controller for the APM X-Gene Real Time Clock
+
+Required properties:
+- compatible : Should be "apm,xgene-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the RTC.
+- #clock-cells: Should be 1.
+- clocks: Reference to the clock entry.
+
+Example:
+
+rtcclk: rtcclk {
+	compatible = "fixed-clock";
+	#clock-cells = <1>;
+	clock-frequency = <100000000>;
+	clock-output-names = "rtcclk";
+};
+
+rtc: rtc@10510000 {
+	compatible = "apm,xgene-rtc";
+	reg = <0x0 0x10510000 0x0 0x400>;
+	interrupts = <0x0 0x46 0x4>;
+	#clock-cells = <1>;
+	clocks = <&rtcclk 0>;
+};
diff --git a/Bindings/serial/cdns,uart.txt b/Bindings/serial/cdns,uart.txt
new file mode 100644
index 000000000000..a3eb154c32ca
--- /dev/null
+++ b/Bindings/serial/cdns,uart.txt
@@ -0,0 +1,20 @@
+Binding for Cadence UART Controller
+
+Required properties:
+- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps"
+- reg: Should contain UART controller registers location and length.
+- interrupts: Should contain UART controller interrupts.
+- clocks: Must contain phandles to the UART clocks
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Tuple to identify input clocks, must contain "uart_clk" and "pclk"
+  See ../clocks/clock-bindings.txt for details.
+
+
+Example:
+	uart@e0000000 {
+		compatible = "cdns,uart-r1p8";
+		clocks = <&clkc 23>, <&clkc 40>;
+		clock-names = "uart_clk", "pclk";
+		reg = <0xE0000000 0x1000>;
+		interrupts = <0 27 4>;
+	};
diff --git a/Bindings/serial/maxim,max310x.txt b/Bindings/serial/maxim,max310x.txt
new file mode 100644
index 000000000000..83a919c241b0
--- /dev/null
+++ b/Bindings/serial/maxim,max310x.txt
@@ -0,0 +1,36 @@
+* Maxim MAX310X advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+  - "maxim,max3107" for Maxim MAX3107,
+  - "maxim,max3108" for Maxim MAX3108,
+  - "maxim,max3109" for Maxim MAX3109,
+  - "maxim,max14830" for Maxim MAX14830.
+- reg: SPI chip select number.
+- interrupt-parent: The phandle for the interrupt controller that
+  services interrupts for this IC.
+- interrupts: Specifies the interrupt source of the parent interrupt
+  controller. The format of the interrupt specifier depends on the
+  parent interrupt controller.
+- clocks: phandle to the IC source clock.
+- clock-names: Should be "xtal" if clock is an external crystal or
+  "osc" if an external clock source is used.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+
+Example:
+	max14830: max14830@0 {
+		compatible = "maxim,max14830";
+		reg = <0>;
+		clocks = <&clk20m>;
+		clock-names = "osc";
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Bindings/serial/nxp,sc16is7xx.txt b/Bindings/serial/nxp,sc16is7xx.txt
new file mode 100644
index 000000000000..246c795668dc
--- /dev/null
+++ b/Bindings/serial/nxp,sc16is7xx.txt
@@ -0,0 +1,33 @@
+* NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+  - "nxp,sc16is740" for NXP SC16IS740,
+  - "nxp,sc16is741" for NXP SC16IS741,
+  - "nxp,sc16is750" for NXP SC16IS750,
+  - "nxp,sc16is752" for NXP SC16IS752,
+  - "nxp,sc16is760" for NXP SC16IS760,
+  - "nxp,sc16is762" for NXP SC16IS762.
+- reg: I2C address of the SC16IS7xx device.
+- interrupt-parent: The phandle for the interrupt controller that
+  services interrupts for this IC.
+- interrupts: Should contain the UART interrupt
+- clocks: Reference to the IC source clock.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+
+Example:
+        sc16is750: sc16is750@51 {
+                compatible = "nxp,sc16is750";
+                reg = <0x51>;
+                clocks = <&clk20m>;
+                interrupt-parent = <&gpio3>;
+                interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+                gpio-controller;
+                #gpio-cells = <2>;
+        };
diff --git a/Bindings/soc/qcom/qcom,gsbi.txt b/Bindings/soc/qcom/qcom,gsbi.txt
new file mode 100644
index 000000000000..4ce24d425bf1
--- /dev/null
+++ b/Bindings/soc/qcom/qcom,gsbi.txt
@@ -0,0 +1,78 @@
+QCOM GSBI (General Serial Bus Interface) Driver
+
+The GSBI controller is modeled as a node with zero or more child nodes, each
+representing a serial sub-node device that is mux'd as part of the GSBI
+configuration settings.  The mode setting will govern the input/output mode of
+the 4 GSBI IOs.
+
+Required properties:
+- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064
+- reg: Address range for GSBI registers
+- clocks: required clock
+- clock-names: must contain "iface" entry
+- qcom,mode : indicates MUX value for configuration of the serial interface.
+  Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values.
+
+Optional properties:
+- qcom,crci : indicates CRCI MUX value for QUP CRCI ports.  Please reference
+  dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+
+Required properties if child node exists:
+- #address-cells: Must be 1
+- #size-cells: Must be 1
+- ranges: Must be present
+
+Properties for children:
+
+A GSBI controller node can contain 0 or more child nodes representing serial
+devices.  These serial devices can be a QCOM UART, I2C controller, spi
+controller, or some combination of aforementioned devices.
+
+See the following for child node definitions:
+Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
+Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+
+Example for APQ8064:
+
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+	gsbi4@16300000 {
+		compatible = "qcom,gsbi-v1.0.0";
+		reg = <0x16300000 0x100>;
+		clocks = <&gcc GSBI4_H_CLK>;
+		clock-names = "iface";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qcom,mode = <GSBI_PROT_I2C_UART>;
+		qcom,crci = <GSBI_CRCI_QUP>;
+
+		/* child nodes go under here */
+
+		i2c_qup4: i2c@16380000 {
+		        compatible = "qcom,i2c-qup-v1.1.1";
+		        reg = <0x16380000 0x1000>;
+		        interrupts = <0 153 0>;
+
+		        clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+		        clock-names = "core", "iface";
+
+		        clock-frequency = <200000>;
+
+		        #address-cells = <1>;
+		        #size-cells = <0>;
+
+		 };
+
+		uart4:	serial@16340000 {
+			compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+			reg = <0x16340000 0x1000>,
+				<0x16300000 0x1000>;
+			interrupts = <0 152 0x0>;
+			clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+			clock-names = "core", "iface";
+			status = "ok";
+		};
+	};
+
diff --git a/Bindings/sound/alc5623.txt b/Bindings/sound/alc5623.txt
new file mode 100644
index 000000000000..26c86c98d671
--- /dev/null
+++ b/Bindings/sound/alc5623.txt
@@ -0,0 +1,25 @@
+ALC5621/ALC5622/ALC5623 audio Codec
+
+Required properties:
+
+ - compatible:	"realtek,alc5623"
+ - reg:		the I2C address of the device.
+
+Optional properties:
+
+ - add-ctrl:	  Default register value for Reg-40h, Additional Control
+		  Register. If absent or has the value of 0, the
+		  register is untouched.
+
+ - jack-det-ctrl: Default register value for Reg-5Ah, Jack Detect
+		  Control Register. If absent or has value 0, the
+		  register is untouched.
+
+Example:
+
+	alc5621: alc5621@1a {
+		compatible = "alc5621";
+		reg = <0x1a>;
+		add-ctrl = <0x3700>;
+		jack-det-ctrl = <0x4810>;
+	};
diff --git a/Bindings/sound/armada-370db-audio.txt b/Bindings/sound/armada-370db-audio.txt
new file mode 100644
index 000000000000..bf984d238620
--- /dev/null
+++ b/Bindings/sound/armada-370db-audio.txt
@@ -0,0 +1,27 @@
+Device Tree bindings for the Armada 370 DB audio
+================================================
+
+These Device Tree bindings are used to describe the audio complex
+found on the Armada 370 DB platform.
+
+Mandatory properties:
+
+ * compatible: must be "marvell,a370db-audio"
+
+ * marvell,audio-controller: a phandle that points to the audio
+   controller of the Armada 370 SoC.
+
+ * marvell,audio-codec: a set of three phandles that points to:
+
+    1/ the analog audio codec connected to the Armada 370 SoC
+    2/ the S/PDIF transceiver
+    3/ the S/PDIF receiver
+
+Example:
+
+	sound {
+	      compatible = "marvell,a370db-audio";
+	      marvell,audio-controller = <&audio_controller>;
+	      marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
+	      status = "okay";
+	};
diff --git a/Bindings/sound/cs4265.txt b/Bindings/sound/cs4265.txt
new file mode 100644
index 000000000000..380fff8e4e83
--- /dev/null
+++ b/Bindings/sound/cs4265.txt
@@ -0,0 +1,29 @@
+CS4265 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "cirrus,cs4265"
+
+  - reg : the I2C address of the device for I2C. The I2C address depends on
+          the state of the AD0 pin.  If AD0 is high, the i2c address is 0x4f.
+          If it is low, the i2c address is 0x4e.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the codec starts.
+
+Examples:
+
+codec_ad0_high: cs4265@4f { /* AD0 Pin is high */
+	compatible = "cirrus,cs4265";
+	reg = <0x4f>;
+};
+
+
+codec_ad0_low: cs4265@4e { /* AD0 Pin is low */
+	compatible = "cirrus,cs4265";
+	reg = <0x4e>;
+};
diff --git a/Bindings/sound/cs42l56.txt b/Bindings/sound/cs42l56.txt
new file mode 100644
index 000000000000..4feb0eb27ea4
--- /dev/null
+++ b/Bindings/sound/cs42l56.txt
@@ -0,0 +1,63 @@
+CS42L52 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l56"
+
+  - reg : the I2C address of the device for I2C
+
+  - VA-supply, VCP-supply, VLDO-supply : power supplies for the device,
+  as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - cirrus,gpio-nreset : GPIO controller's phandle and the number
+  of the GPIO used to reset the codec.
+
+  - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
+  Allowable values of 0x00 through 0x0F. These are raw values written to the
+  register, not the actual frequency. The frequency is determined by the following.
+  Frequency = MCLK / 4 * (N+2)
+  N = chgfreq_val
+  MCLK = Where MCLK is the frequency of the mclk signal after the MCLKDIV2 circuit.
+
+  - cirrus,ain1a-ref-cfg, ain1b-ref-cfg : boolean, If present, AIN1A or AIN1B are configured
+  as a pseudo-differential input referenced to AIN1REF/AIN3A.
+
+  - cirrus,ain2a-ref-cfg, ain2b-ref-cfg : boolean, If present, AIN2A or AIN2B are configured
+  as a pseudo-differential input referenced to AIN2REF/AIN3B.
+
+  - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin.
+  0 = 0.5 x VA
+  1 = 0.6 x VA
+  2 = 0.7 x VA
+  3 = 0.8 x VA
+  4 = 0.83 x VA
+  5 = 0.91 x VA
+
+  - cirrus,adaptive-pwr-cfg : Configures how the power to the Headphone and Lineout
+  Amplifiers adapt to the output signal levels.
+  0 = Adapt to Volume Mode. Voltage level determined by the sum of the relevant volume settings.
+  1 = Fixed - Headphone and Line Amp supply = + or - VCP/2.
+  2 = Fixed - Headphone and Line Amp supply = + or - VCP.
+  3 = Adapted to Signal; Voltage level is dynamically determined by the output signal.
+
+  - cirrus,hpf-left-freq, hpf-right-freq : Sets the corner frequency (-3dB point) for the internal High-Pass
+  Filter.
+  0 = 1.8Hz
+  1 = 119Hz
+  2 = 236Hz
+  3 = 464Hz
+
+
+Example:
+
+codec: codec@4b {
+	compatible = "cirrus,cs42l56";
+	reg = <0x4b>;
+	gpio-reset = <&gpio 10 0>;
+	cirrus,chgfreq-divisor = <0x05>;
+	cirrus.ain1_ref_cfg;
+	cirrus,micbias-lvl = <5>;
+	VA-supply = <&reg_audio>;
+};
diff --git a/Bindings/sound/cs42xx8.txt b/Bindings/sound/cs42xx8.txt
new file mode 100644
index 000000000000..f631fbca6284
--- /dev/null
+++ b/Bindings/sound/cs42xx8.txt
@@ -0,0 +1,28 @@
+CS42448/CS42888 audio CODEC
+
+Required properties:
+
+  - compatible : must contain one of "cirrus,cs42448" and "cirrus,cs42888"
+
+  - reg : the I2C address of the device for I2C
+
+  - clocks : a list of phandles + clock-specifiers, one for each entry in
+    clock-names
+
+  - clock-names : must contain "mclk"
+
+  - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device,
+    as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example:
+
+codec: cs42888@48 {
+	compatible = "cirrus,cs42888";
+	reg = <0x48>;
+	clocks = <&codec_mclk 0>;
+	clock-names = "mclk";
+	VA-supply = <&reg_audio>;
+	VD-supply = <&reg_audio>;
+	VLS-supply = <&reg_audio>;
+	VLC-supply = <&reg_audio>;
+};
diff --git a/Bindings/sound/da9055.txt b/Bindings/sound/da9055.txt
new file mode 100644
index 000000000000..ed1b7cc6f249
--- /dev/null
+++ b/Bindings/sound/da9055.txt
@@ -0,0 +1,22 @@
+* Dialog DA9055 Audio CODEC
+
+DA9055 provides Audio CODEC support (I2C only).
+
+The Audio CODEC device in DA9055 has it's own I2C address which is configurable,
+so the device is instantiated separately from the PMIC (MFD) device.
+
+For details on accompanying PMIC I2C device, see the following:
+Documentation/devicetree/bindings/mfd/da9055.txt
+
+Required properties:
+
+  - compatible: "dlg,da9055-codec"
+  - reg: Specifies the I2C slave address
+
+
+Example:
+
+	codec: da9055-codec@1a {
+		compatible = "dlg,da9055-codec";
+		reg = <0x1a>;
+	};
diff --git a/Bindings/sound/eukrea-tlv320.txt b/Bindings/sound/eukrea-tlv320.txt
new file mode 100644
index 000000000000..0d7985c864af
--- /dev/null
+++ b/Bindings/sound/eukrea-tlv320.txt
@@ -0,0 +1,21 @@
+Audio complex for Eukrea boards with tlv320aic23 codec.
+
+Required properties:
+- compatible : "eukrea,asoc-tlv320"
+- eukrea,model : The user-visible name of this sound complex.
+- ssi-controller : The phandle of the SSI controller.
+- fsl,mux-int-port : The internal port of the i.MX audio muxer (AUDMUX).
+- fsl,mux-ext-port : The external port of the i.MX audio muxer.
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx51-eukrea-tlv320aic23";
+		ssi-controller = <&ssi2>;
+		fsl,mux-int-port = <2>;
+		fsl,mux-ext-port = <3>;
+	};
diff --git a/Bindings/sound/fsl,asrc.txt b/Bindings/sound/fsl,asrc.txt
new file mode 100644
index 000000000000..b93362a570be
--- /dev/null
+++ b/Bindings/sound/fsl,asrc.txt
@@ -0,0 +1,60 @@
+Freescale Asynchronous Sample Rate Converter (ASRC) Controller
+
+The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
+signal associated with an input clock into a signal associated with a different
+output clock. The driver currently works as a Front End of DPCM with other Back
+Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
+three substreams within totally 10 channels.
+
+Required properties:
+
+  - compatible		: Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".
+
+  - reg			: Offset and length of the register set for the device.
+
+  - interrupts		: Contains the spdif interrupt.
+
+  - dmas		: Generic dma devicetree binding as described in
+			  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names		: Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
+
+  - clocks		: Contains an entry for each entry in clock-names.
+
+  - clock-names		: Contains the following entries
+	"mem"		  Peripheral access clock to access registers.
+	"ipg"		  Peripheral clock to driver module.
+	"asrck_<0-f>"	  Clock sources for input and output clock.
+
+   - big-endian		: If this property is absent, the little endian mode
+			  will be in use as default. Otherwise, the big endian
+			  mode will be in use for all the device registers.
+
+   - fsl,asrc-rate	: Defines a mutual sample rate used by DPCM Back Ends.
+
+   - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
+
+Example:
+
+asrc: asrc@02034000 {
+	compatible = "fsl,imx53-asrc";
+	reg = <0x02034000 0x4000>;
+	interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks 107>, <&clks 107>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+	       <&clks 107>, <&clks 0>, <&clks 0>;
+	clock-names = "mem", "ipg", "asrck0",
+		"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+		"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+		"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+		"asrck_d", "asrck_e", "asrck_f";
+	dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+	     <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+	dma-names = "rxa", "rxb", "rxc",
+		"txa", "txb", "txc";
+	fsl,asrc-rate  = <48000>;
+	fsl,asrc-width = <16>;
+	status = "okay";
+};
diff --git a/Bindings/sound/max98095.txt b/Bindings/sound/max98095.txt
new file mode 100644
index 000000000000..318a4c82f17f
--- /dev/null
+++ b/Bindings/sound/max98095.txt
@@ -0,0 +1,22 @@
+MAX98095 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "maxim,max98095".
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+
+- clock-names: Should be "mclk"
+
+Example:
+
+max98095: codec@11 {
+	compatible = "maxim,max98095";
+	reg = <0x11>;
+};
diff --git a/Bindings/sound/nokia,rx51.txt b/Bindings/sound/nokia,rx51.txt
new file mode 100644
index 000000000000..72f93d996273
--- /dev/null
+++ b/Bindings/sound/nokia,rx51.txt
@@ -0,0 +1,27 @@
+* Nokia N900 audio setup
+
+Required properties:
+- compatible: Should contain "nokia,n900-audio"
+- nokia,cpu-dai: phandle for the McBSP node
+- nokia,audio-codec: phandles for the main TLV320AIC3X node and the
+                     auxiliary TLV320AIC3X node (in this order)
+- nokia,headphone-amplifier: phandle for the TPA6130A2 node
+- tvout-selection-gpios: GPIO for tvout selection
+- jack-detection-gpios: GPIO for jack detection
+- eci-switch-gpios: GPIO for ECI (Enhancement Control Interface) switch
+- speaker-amplifier-gpios: GPIO for speaker amplifier
+
+Example:
+
+sound {
+	compatible = "nokia,n900-audio";
+
+	nokia,cpu-dai = <&mcbsp2>;
+	nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
+	nokia,headphone-amplifier = <&tpa6130a2>;
+
+	tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
+	jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
+	eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
+	speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+};
diff --git a/Bindings/sound/nvidia,tegra30-hda.txt b/Bindings/sound/nvidia,tegra30-hda.txt
new file mode 100644
index 000000000000..b4730c2822bc
--- /dev/null
+++ b/Bindings/sound/nvidia,tegra30-hda.txt
@@ -0,0 +1,28 @@
+NVIDIA Tegra30 HDA controller
+
+Required properties:
+- compatible : "nvidia,tegra30-hda"
+- reg : Should contain the HDA registers location and length.
+- interrupts : The interrupt from the HDA controller.
+- clocks : Must contain an entry for each required entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
+
+Example:
+
+hda@0,70030000 {
+	compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
+	reg = <0x0 0x70030000 0x0 0x10000>;
+	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&tegra_car TEGRA124_CLK_HDA>,
+		 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+		 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+	clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+	resets = <&tegra_car 125>, /* hda */
+		 <&tegra_car 128>; /* hda2hdmi */
+		 <&tegra_car 111>, /* hda2codec_2x */
+	reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+};
diff --git a/Bindings/sound/pcm512x.txt b/Bindings/sound/pcm512x.txt
new file mode 100644
index 000000000000..faff75e64573
--- /dev/null
+++ b/Bindings/sound/pcm512x.txt
@@ -0,0 +1,30 @@
+PCM512x audio CODECs
+
+These devices support both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : One of "ti,pcm5121" or "ti,pcm5122"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+  - AVDD-supply, DVDD-supply, and CPVDD-supply : power supplies for the
+    device, as covered in bindings/regulator/regulator.txt
+
+Optional properties:
+
+  - clocks : A clock specifier for the clock connected as SCLK.  If this
+    is absent the device will be configured to clock from BCLK.
+
+Example:
+
+	pcm5122: pcm5122@4c {
+		compatible = "ti,pcm5122";
+		reg = <0x4c>;
+
+		AVDD-supply = <&reg_3v3_analog>;
+		DVDD-supply = <&reg_1v8>;
+		CPVDD-supply = <&reg_3v3>;
+	};
diff --git a/Bindings/sound/renesas,rsnd.txt b/Bindings/sound/renesas,rsnd.txt
new file mode 100644
index 000000000000..aa697abf337e
--- /dev/null
+++ b/Bindings/sound/renesas,rsnd.txt
@@ -0,0 +1,115 @@
+Renesas R-Car sound
+
+Required properties:
+- compatible			: "renesas,rcar_sound-gen1" if generation1
+				  "renesas,rcar_sound-gen2" if generation2
+- reg				: Should contain the register physical address.
+				  required register is
+				   SRU/ADG/SSI      if generation1
+				   SRU/ADG/SSIU/SSI if generation2
+- rcar_sound,ssi		: Should contain SSI feature.
+				  The number of SSI subnode should be same as HW.
+				  see below for detail.
+- rcar_sound,src		: Should contain SRC feature.
+				  The number of SRC subnode should be same as HW.
+				  see below for detail.
+- rcar_sound,dvc		: Should contain DVC feature.
+				  The number of DVC subnode should be same as HW.
+				  see below for detail.
+- rcar_sound,dai		: DAI contents.
+				  The number of DAI subnode should be same as HW.
+				  see below for detail.
+
+SSI subnode properties:
+- interrupts			: Should contain SSI interrupt for PIO transfer
+- shared-pin			: if shared clock pin
+- pio-transfer			: use PIO transfer mode
+- no-busif			: BUSIF is not ussed when [mem -> SSI] via DMA case
+
+SRC subnode properties:
+no properties at this point
+
+DAI subnode properties:
+- playback			: list of playback modules
+- capture			: list of capture  modules
+
+Example:
+
+rcar_sound: rcar_sound@0xffd90000 {
+	#sound-dai-cells = <1>;
+	compatible = "renesas,rcar_sound-gen2";
+	reg =	<0 0xec500000 0 0x1000>, /* SCU */
+		<0 0xec5a0000 0 0x100>,  /* ADG */
+		<0 0xec540000 0 0x1000>, /* SSIU */
+		<0 0xec541000 0 0x1280>; /* SSI */
+
+	rcar_sound,dvc {
+		dvc0: dvc@0 { };
+		dvc1: dvc@1 { };
+	};
+
+	rcar_sound,src {
+		src0: src@0 { };
+		src1: src@1 { };
+		src2: src@2 { };
+		src3: src@3 { };
+		src4: src@4 { };
+		src5: src@5 { };
+		src6: src@6 { };
+		src7: src@7 { };
+		src8: src@8 { };
+		src9: src@9 { };
+	};
+
+	rcar_sound,ssi {
+		ssi0: ssi@0 {
+			interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi1: ssi@1 {
+			interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi2: ssi@2 {
+			interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi3: ssi@3 {
+			interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi4: ssi@4 {
+			interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi5: ssi@5 {
+			interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi6: ssi@6 {
+			interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi7: ssi@7 {
+			interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi8: ssi@8 {
+			interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
+		};
+		ssi9: ssi@9 {
+			interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi5 &src5>;
+			capture  = <&ssi6>;
+		};
+		dai1 {
+			playback = <&ssi3>;
+		};
+		dai2 {
+			capture  = <&ssi4>;
+		};
+		dai3 {
+			playback = <&ssi7>;
+		};
+		dai4 {
+			capture  = <&ssi8>;
+		};
+	};
+};
diff --git a/Bindings/sound/rockchip-i2s.txt b/Bindings/sound/rockchip-i2s.txt
new file mode 100644
index 000000000000..6c55fcfe5e1d
--- /dev/null
+++ b/Bindings/sound/rockchip-i2s.txt
@@ -0,0 +1,37 @@
+* Rockchip I2S controller
+
+The I2S bus (Inter-IC sound bus) is a serial link for digital
+audio data transfer between devices in the system.
+
+Required properties:
+
+- compatible: should be one of the followings
+   - "rockchip,rk3066-i2s": for rk3066
+   - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
+   - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: should contain the I2S interrupt.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: should include "tx" and "rx".
+- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
+- clock-names: should contain followings:
+   - "i2s_hclk": clock for I2S BUS
+   - "i2s_clk" : clock for I2S controller
+
+Example for rk3288 I2S controller:
+
+i2s@ff890000 {
+	compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+	reg = <0xff890000 0x10000>;
+	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dmas = <&pdma1 0>, <&pdma1 1>;
+	dma-names = "rx", "tx";
+	clock-names = "i2s_hclk", "i2s_clk";
+	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+};
diff --git a/Bindings/sound/samsung,odroidx2-max98090.txt b/Bindings/sound/samsung,odroidx2-max98090.txt
new file mode 100644
index 000000000000..9148f72319e1
--- /dev/null
+++ b/Bindings/sound/samsung,odroidx2-max98090.txt
@@ -0,0 +1,35 @@
+Samsung Exynos Odroid X2/U3 audio complex with MAX98090 codec
+
+Required properties:
+ - compatible : "samsung,odroidx2-audio" - for Odroid X2 board,
+		"samsung,odroidu3-audio" - for Odroid U3 board
+ - samsung,model : the user-visible name of this sound complex
+ - samsung,i2s-controller : the phandle of the I2S controller
+ - samsung,audio-codec : the phandle of the MAX98090 audio codec
+ - samsung,audio-routing : a list of the connections between audio
+   components;  each entry is a pair of strings, the first being the
+   connection's sink, the second being the connection's source;
+   valid names for sources and sinks are the MAX98090's pins (as
+   documented in its binding), and the jacks on the board
+   For Odroid X2:
+     * Headphone Jack
+     * Mic Jack
+     * DMIC
+
+   For Odroid U3:
+     * Headphone Jack
+     * Speakers
+
+Example:
+
+sound {
+	compatible = "samsung,odroidu3-audio";
+	samsung,i2s-controller = <&i2s0>;
+	samsung,audio-codec = <&max98090>;
+	samsung,model = "Odroid-X2";
+	samsung,audio-routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"IN1", "Mic Jack",
+		"Mic Jack", "MICBIAS";
+};
diff --git a/Bindings/sound/sirf-audio-codec.txt b/Bindings/sound/sirf-audio-codec.txt
new file mode 100644
index 000000000000..062f5ec36f9b
--- /dev/null
+++ b/Bindings/sound/sirf-audio-codec.txt
@@ -0,0 +1,17 @@
+SiRF internal audio CODEC
+
+Required properties:
+
+  - compatible : "sirf,atlas6-audio-codec" or "sirf,prima2-audio-codec"
+
+  - reg : the register address of the device.
+
+  - clocks: the clock of SiRF internal audio codec
+
+Example:
+
+audiocodec: audiocodec@b0040000 {
+	compatible = "sirf,atlas6-audio-codec";
+	reg = <0xb0040000 0x10000>;
+	clocks = <&clks 27>;
+};
diff --git a/Bindings/sound/sirf-audio-port.txt b/Bindings/sound/sirf-audio-port.txt
new file mode 100644
index 000000000000..1f66de3c8f00
--- /dev/null
+++ b/Bindings/sound/sirf-audio-port.txt
@@ -0,0 +1,20 @@
+* SiRF SoC audio port
+
+Required properties:
+- compatible: "sirf,audio-port"
+- reg: Base address and size entries:
+- dmas: List of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+
+  One of the DMA channels will be responsible for transmission (should be
+  named "tx") and one for reception (should be named "rx").
+
+Example:
+
+audioport: audioport@b0040000 {
+	compatible = "sirf,audio-port";
+	reg = <0xb0040000 0x10000>;
+	dmas = <&dmac1 3>, <&dmac1 8>;
+	dma-names = "rx", "tx";
+};
diff --git a/Bindings/sound/sirf-audio.txt b/Bindings/sound/sirf-audio.txt
new file mode 100644
index 000000000000..c88882ca3704
--- /dev/null
+++ b/Bindings/sound/sirf-audio.txt
@@ -0,0 +1,41 @@
+* SiRF atlas6 and prima2 internal audio codec and port based audio setups
+
+Required properties:
+- compatible: "sirf,sirf-audio-card"
+- sirf,audio-platform: phandle for the platform node
+- sirf,audio-codec: phandle for the SiRF internal codec node
+
+Optional properties:
+- hp-pa-gpios: Need to be present if the board need control external
+  headphone amplifier.
+- spk-pa-gpios: Need to be present if the board need control external
+  speaker amplifier.
+- hp-switch-gpios: Need to be present if the board capable to detect jack
+  insertion, removal.
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headset Stereophone
+ * Ext Spk
+ * Line In
+ * Mic
+
+SiRF internal audio codec pins:
+ * HPOUTL
+ * HPOUTR
+ * SPKOUT
+ * Ext Mic
+ * Mic Bias
+
+Example:
+
+sound {
+		compatible = "sirf,sirf-audio-card";
+		sirf,audio-codec = <&audiocodec>;
+		sirf,audio-platform = <&audioport>;
+		hp-pa-gpios = <&gpio 44 0>;
+		spk-pa-gpios = <&gpio 46 0>;
+		hp-switch-gpios = <&gpio 45 0>;
+};
+
diff --git a/Bindings/sound/sirf-usp.txt b/Bindings/sound/sirf-usp.txt
new file mode 100644
index 000000000000..02f85b32d359
--- /dev/null
+++ b/Bindings/sound/sirf-usp.txt
@@ -0,0 +1,27 @@
+* SiRF SoC USP module
+
+Required properties:
+- compatible: "sirf,prima2-usp-pcm"
+- reg: Base address and size entries:
+- dmas: List of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+  These strings correspond 1:1 with the ordered pairs in dmas.
+
+  One of the DMA channels will be responsible for transmission (should be
+  named "tx") and one for reception (should be named "rx").
+
+- clocks: USP controller clock source
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+
+Example:
+usp0: usp@b0080000 {
+	compatible = "sirf,prima2-usp-pcm";
+	reg = <0xb0080000 0x10000>;
+	clocks = <&clks 28>;
+	dmas = <&dmac1 1>, <&dmac1 2>;
+	dma-names = "rx", "tx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usp0_only_utfs_pins_a>;
+};
+
diff --git a/Bindings/sound/snow.txt b/Bindings/sound/snow.txt
new file mode 100644
index 000000000000..6df74f15687f
--- /dev/null
+++ b/Bindings/sound/snow.txt
@@ -0,0 +1,22 @@
+Audio Binding for Snow boards
+
+Required properties:
+- compatible : Can be one of the following,
+			"google,snow-audio-max98090" or
+			"google,snow-audio-max98091" or
+			"google,snow-audio-max98095"
+- samsung,i2s-controller: The phandle of the Samsung I2S controller
+- samsung,audio-codec: The phandle of the audio codec
+
+Optional:
+- samsung,model: The name of the sound-card
+
+Example:
+
+sound {
+		compatible = "google,snow-audio-max98095";
+
+		samsung,model = "Snow-I2S-MAX98095";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98095>;
+};
diff --git a/Bindings/sound/st,sta350.txt b/Bindings/sound/st,sta350.txt
new file mode 100644
index 000000000000..b7e71bf5caf4
--- /dev/null
+++ b/Bindings/sound/st,sta350.txt
@@ -0,0 +1,131 @@
+STA350 audio CODEC
+
+The driver for this device only supports I2C.
+
+Required properties:
+
+  - compatible: "st,sta350"
+  - reg: the I2C address of the device for I2C
+  - reset-gpios: a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the codec starts.
+
+  - power-down-gpios: a GPIO spec for the power down pin. If specified,
+		      it will be deasserted before communication to the codec
+		      starts.
+
+  - vdd-dig-supply: regulator spec, providing 3.3V
+  - vdd-pll-supply: regulator spec, providing 3.3V
+  - vcc-supply: regulator spec, providing 5V - 26V
+
+Optional properties:
+
+  -  st,output-conf: number, Selects the output configuration:
+	0: 2-channel (full-bridge) power, 2-channel data-out
+	1: 2 (half-bridge). 1 (full-bridge) on-board power
+	2: 2 Channel (Full-Bridge) Power, 1 Channel FFX
+	3: 1 Channel Mono-Parallel
+	If parameter is missing, mode 0 will be enabled.
+	This property has to be specified as '/bits/ 8' value.
+
+  -  st,ch1-output-mapping: Channel 1 output mapping
+  -  st,ch2-output-mapping: Channel 2 output mapping
+  -  st,ch3-output-mapping: Channel 3 output mapping
+	0: Channel 1
+	1: Channel 2
+	2: Channel 3
+	If parameter is missing, channel 1 is choosen.
+	This properties have to be specified as '/bits/ 8' values.
+
+  -  st,thermal-warning-recover:
+	If present, thermal warning recovery is enabled.
+
+  -  st,thermal-warning-adjustment:
+	If present, thermal warning adjustment is enabled.
+
+  -  st,fault-detect-recovery:
+	If present, then fault recovery will be enabled.
+
+  -  st,ffx-power-output-mode: string
+	The FFX power output mode selects how the FFX output timing is
+	configured. Must be one of these values:
+	  -  "drop-compensation"
+	  -  "tapered-compensation"
+	  -  "full-power-mode"
+	  -  "variable-drop-compensation" (default)
+
+  -  st,drop-compensation-ns: number
+	Only required for "st,ffx-power-output-mode" ==
+	"variable-drop-compensation".
+	Specifies the drop compensation in nanoseconds.
+	The value must be in the range of 0..300, and only
+	multiples of 20 are allowed. Default is 140ns.
+
+  -  st,overcurrent-warning-adjustment:
+	If present, overcurrent warning adjustment is enabled.
+
+  -  st,max-power-use-mpcc:
+	If present, then MPCC bits are used for MPC coefficients,
+	otherwise standard MPC coefficients are used.
+
+  -  st,max-power-corr:
+	If present, power bridge correction for THD reduction near maximum
+	power output is enabled.
+
+  -  st,am-reduction-mode:
+	If present, FFX mode runs in AM reduction mode, otherwise normal
+	FFX mode is used.
+
+  -  st,odd-pwm-speed-mode:
+	If present, PWM speed mode run on odd speed mode (341.3 kHz) on all
+	channels. If not present, normal PWM spped mode (384 kHz) will be used.
+
+  -  st,distortion-compensation:
+	If present, distortion compensation variable uses DCC coefficient.
+	If not present, preset DC coefficient is used.
+
+  -  st,invalid-input-detect-mute:
+	If present, automatic invalid input detect mute is enabled.
+
+  -  st,activate-mute-output:
+	If present, a mute output will be activated in ase the volume will
+	reach a value lower than -76 dBFS.
+
+  -  st,bridge-immediate-off:
+	If present, the bridge will be switched off immediately after the
+	power-down-gpio goes low. Otherwise, the bridge will wait for 13
+	million clock cycles to pass before shutting down.
+
+  -  st,noise-shape-dc-cut:
+	If present, the noise-shaping technique on the DC cutoff filter are
+	enabled.
+
+  -  st,powerdown-master-volume:
+	If present, the power-down pin and I2C power-down functions will
+	act on the master volume. Otherwise, the functions will act on the
+	mute commands.
+
+  -  st,powerdown-delay-divider:
+	If present, the bridge power-down time will be divided by the provided
+	value. If not specified, a divider of 1 will be used. Allowed values
+	are 1, 2, 4, 8, 16, 32, 64 and 128.
+	This property has to be specified as '/bits/ 8' value.
+
+Example:
+
+codec: sta350@38 {
+	compatible = "st,sta350";
+	reg = <0x1c>;
+	reset-gpios = <&gpio1 19 0>;
+	power-down-gpios = <&gpio1 16 0>;
+	st,output-conf = /bits/ 8  <0x3>;	// set output to 2-channel
+						// (full-bridge) power,
+						// 2-channel data-out
+	st,ch1-output-mapping = /bits/ 8 <0>;	// set channel 1 output ch 1
+	st,ch2-output-mapping = /bits/ 8 <0>;	// set channel 2 output ch 1
+	st,ch3-output-mapping = /bits/ 8 <0>;	// set channel 3 output ch 1
+	st,max-power-correction;		// enables power bridge
+						// correction for THD reduction
+						// near maximum power output
+	st,invalid-input-detect-mute;		// mute if no valid digital
+						// audio signal is provided.
+};
diff --git a/Bindings/sound/tas2552.txt b/Bindings/sound/tas2552.txt
new file mode 100644
index 000000000000..55e2a0af5645
--- /dev/null
+++ b/Bindings/sound/tas2552.txt
@@ -0,0 +1,26 @@
+Texas Instruments - tas2552 Codec module
+
+The tas2552 serial control bus communicates through I2C protocols
+
+Required properties:
+	- compatible - One of:
+		"ti,tas2552" - TAS2552
+	- reg -  I2C slave address
+	- supply-*: Required supply regulators are:
+		"vbat"		battery voltage
+		"iovdd"		I/O Voltage
+		"avdd"		Analog DAC Voltage
+
+Optional properties:
+	- enable-gpio - gpio pin to enable/disable the device
+
+Example:
+
+tas2552: tas2552@41 {
+	compatible = "ti,tas2552";
+	reg = <0x41>;
+	enable-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/TAS2552
diff --git a/Bindings/sound/tdm-slot.txt b/Bindings/sound/tdm-slot.txt
new file mode 100644
index 000000000000..6a2c84247f91
--- /dev/null
+++ b/Bindings/sound/tdm-slot.txt
@@ -0,0 +1,20 @@
+TDM slot:
+
+This specifies audio DAI's TDM slot.
+
+TDM slot properties:
+dai-tdm-slot-num : Number of slots in use.
+dai-tdm-slot-width :  Width in bits for each slot.
+
+For instance:
+	dai-tdm-slot-num = <2>;
+	dai-tdm-slot-width = <8>;
+
+And for each spcified driver, there could be one .of_xlate_tdm_slot_mask()
+to specify a explicit mapping of the channels and the slots. If it's absent
+the default snd_soc_of_xlate_tdm_slot_mask() will be used to generating the
+tx and rx masks.
+
+For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit
+for an active slot as default, and the default active bits are at the LSB of
+the masks.
diff --git a/Bindings/sound/tlv320aic31xx.txt b/Bindings/sound/tlv320aic31xx.txt
new file mode 100644
index 000000000000..eff12be5e789
--- /dev/null
+++ b/Bindings/sound/tlv320aic31xx.txt
@@ -0,0 +1,61 @@
+Texas Instruments - tlv320aic31xx Codec module
+
+The tlv320aic31xx serial control bus communicates through I2C protocols
+
+Required properties:
+
+- compatible - "string" - One of:
+    "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp
+    "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp
+    "ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP)
+    "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP)
+    "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
+    "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
+
+- reg - <int> -  I2C slave address
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+  DVDD-supply : power supplies for the device as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Optional properties:
+
+- gpio-reset - gpio pin number used for codec reset
+- ai31xx-micbias-vg - MicBias Voltage setting
+        1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V
+        2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V
+        3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
+	If this node is not mentioned or if the value is unknown, then
+	micbias	is set to 2.0V.
+
+CODEC output pins:
+  * HPL
+  * HPR
+  * SPL, devices with stereo speaker amp
+  * SPR, devices with stereo speaker amp
+  * SPK, devices with mono speaker amp
+  * MICBIAS
+
+CODEC input pins:
+  * MIC1LP
+  * MIC1RP
+  * MIC1LM
+
+The pins can be used in referring sound node's audio-routing property.
+
+Example:
+#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+
+tlv320aic31xx: tlv320aic31xx@18 {
+	compatible = "ti,tlv320aic311x";
+	reg = <0x18>;
+
+	ai31xx-micbias-vg = <MICBIAS_OFF>;
+
+	HPVDD-supply = <&regulator>;
+	SPRVDD-supply = <&regulator>;
+	SPLVDD-supply = <&regulator>;
+	AVDD-supply = <&regulator>;
+	IOVDD-supply = <&regulator>;
+	DVDD-supply = <&regulator>;
+};
diff --git a/Bindings/sound/tlv320aic32x4.txt b/Bindings/sound/tlv320aic32x4.txt
new file mode 100644
index 000000000000..5e2741af27be
--- /dev/null
+++ b/Bindings/sound/tlv320aic32x4.txt
@@ -0,0 +1,30 @@
+Texas Instruments - tlv320aic32x4 Codec module
+
+The tlv320aic32x4 serial control bus communicates through I2C protocols
+
+Required properties:
+ - compatible: Should be "ti,tlv320aic32x4"
+ - reg: I2C slave address
+ - supply-*: Required supply regulators are:
+    "iov" - digital IO power supply
+    "ldoin" - LDO power supply
+    "dv" - Digital core power supply
+    "av" - Analog core power supply
+    If you supply ldoin, dv and av are optional. Otherwise they are required
+   See regulator/regulator.txt for more information about the detailed binding
+   format.
+
+Optional properties:
+ - reset-gpios: Reset-GPIO phandle with args as described in gpio/gpio.txt
+ - clocks/clock-names: Clock named 'mclk' for the master clock of the codec.
+   See clock/clock-bindings.txt for information about the detailed format.
+
+
+Example:
+
+codec: tlv320aic32x4@18 {
+	compatible = "ti,tlv320aic32x4";
+	reg = <0x18>;
+	clocks = <&clks 201>;
+	clock-names = "mclk";
+};
diff --git a/Bindings/sound/widgets.txt b/Bindings/sound/widgets.txt
new file mode 100644
index 000000000000..b6de5ba3b2de
--- /dev/null
+++ b/Bindings/sound/widgets.txt
@@ -0,0 +1,20 @@
+Widgets:
+
+This mainly specifies audio off-codec DAPM widgets.
+
+Each entry is a pair of strings in DT:
+
+	"template-wname", "user-supplied-wname"
+
+The "template-wname" being the template widget name and currently includes:
+"Microphone", "Line", "Headphone" and "Speaker".
+
+The "user-supplied-wname" being the user specified widget name.
+
+For instance:
+	simple-audio-widgets =
+		"Microphone", "Microphone Jack",
+		"Line", "Line In Jack",
+		"Line", "Line Out Jack",
+		"Headphone", "Headphone Jack",
+		"Speaker", "Speaker External";
diff --git a/Bindings/sound/wm8904.txt b/Bindings/sound/wm8904.txt
new file mode 100644
index 000000000000..e99f4097c83c
--- /dev/null
+++ b/Bindings/sound/wm8904.txt
@@ -0,0 +1,33 @@
+WM8904 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+  - compatible: "wlf,wm8904"
+  - reg: the I2C address of the device.
+  - clock-names: "mclk"
+  - clocks: reference to
+    <Documentation/devicetree/bindings/clock/clock-bindings.txt>
+
+Pins on the device (for linking into audio routes):
+
+  * IN1L
+  * IN1R
+  * IN2L
+  * IN2R
+  * IN3L
+  * IN3R
+  * HPOUTL
+  * HPOUTR
+  * LINEOUTL
+  * LINEOUTR
+  * MICBIAS
+
+Examples:
+
+codec: wm8904@1a {
+	compatible = "wlf,wm8904";
+	reg = <0x1a>;
+	clocks = <&pck0>;
+	clock-names = "mclk";
+};
diff --git a/Bindings/spi/qcom,spi-qup.txt b/Bindings/spi/qcom,spi-qup.txt
new file mode 100644
index 000000000000..e2c88df2cc15
--- /dev/null
+++ b/Bindings/spi/qcom,spi-qup.txt
@@ -0,0 +1,95 @@
+Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+The QUP core is an AHB slave that provides a common data path (an output FIFO
+and an input FIFO) for serial peripheral interface (SPI) mini-core.
+
+SPI in master mode supports up to 50MHz, up to four chip selects, programmable
+data path from 4 bits to 32 bits and numerous protocol variants.
+
+Required properties:
+- compatible:     Should contain:
+		  "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064.
+		  "qcom,spi-qup-v2.1.1" for 8974 and later
+		  "qcom,spi-qup-v2.2.1" for 8974 v2 and later.
+
+- reg:            Should contain base register location and length
+- interrupts:     Interrupt number used by this controller
+
+- clocks:         Should contain the core clock and the AHB clock.
+- clock-names:    Should be "core" for the core clock and "iface" for the
+                  AHB clock.
+
+- #address-cells: Number of cells required to define a chip select
+                  address on the SPI bus. Should be set to 1.
+- #size-cells:    Should be zero.
+
+Optional properties:
+- spi-max-frequency: Specifies maximum SPI clock frequency,
+                     Units - Hz. Definition as per
+                     Documentation/devicetree/bindings/spi/spi-bus.txt
+- num-cs:	total number of chipselects
+- cs-gpios:	should specify GPIOs used for chipselects.
+		The gpios will be referred to as reg = <index> in the SPI child
+		nodes.  If unspecified, a single SPI device without a chip
+		select can be used.
+
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+	spi_8: spi@f9964000 { /* BLSP2 QUP2 */
+
+		compatible = "qcom,spi-qup-v2";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xf9964000 0x1000>;
+		interrupts = <0 102 0>;
+		spi-max-frequency = <19200000>;
+
+		clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+		clock-names = "core", "iface";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi8_default>;
+
+		device@0 {
+			compatible = "arm,pl022-dummy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0>; /* Chip select 0 */
+			spi-max-frequency = <19200000>;
+			spi-cpol;
+		};
+
+		device@1 {
+			compatible = "arm,pl022-dummy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <1>; /* Chip select 1 */
+			spi-max-frequency = <9600000>;
+			spi-cpha;
+		};
+
+		device@2 {
+			compatible = "arm,pl022-dummy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <2>; /* Chip select 2 */
+			spi-max-frequency = <19200000>;
+			spi-cpol;
+			spi-cpha;
+		};
+
+		device@3 {
+			compatible = "arm,pl022-dummy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <3>; /* Chip select 3 */
+			spi-max-frequency = <19200000>;
+			spi-cpol;
+			spi-cpha;
+			spi-cs-high;
+		};
+	};
diff --git a/Bindings/spi/snps,dw-apb-ssi.txt b/Bindings/spi/snps,dw-apb-ssi.txt
new file mode 100644
index 000000000000..bd99193e87b9
--- /dev/null
+++ b/Bindings/spi/snps,dw-apb-ssi.txt
@@ -0,0 +1,28 @@
+Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface.
+
+Required properties:
+- compatible : "snps,dw-apb-ssi"
+- reg : The register base for the controller.
+- interrupts : One interrupt, used by the controller.
+- #address-cells : <1>, as required by generic SPI binding.
+- #size-cells : <0>, also as required by generic SPI binding.
+
+Optional properties:
+- cs-gpios : Specifies the gpio pis to be used for chipselects.
+- num-cs : The number of chipselects. If omitted, this will default to 4.
+
+Child nodes as per the generic SPI binding.
+
+Example:
+
+	spi@fff00000 {
+		compatible = "snps,dw-apb-ssi";
+		reg = <0xfff00000 0x1000>;
+		interrupts = <0 154 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		num-cs = <2>;
+		cs-gpios = <&gpio0 13 0>,
+			   <&gpio0 14 0>;
+	};
+
diff --git a/Bindings/spi/spi-cadence.txt b/Bindings/spi/spi-cadence.txt
new file mode 100644
index 000000000000..94f09141a4f0
--- /dev/null
+++ b/Bindings/spi/spi-cadence.txt
@@ -0,0 +1,31 @@
+Cadence SPI controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible		: Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6".
+- reg			: Physical base address and size of SPI registers map.
+- interrupts		: Property with a value describing the interrupt
+			  number.
+- interrupt-parent	: Must be core interrupt controller
+- clock-names		: List of input clock names - "ref_clk", "pclk"
+			  (See clock bindings for details).
+- clocks		: Clock phandles (see clock bindings for details).
+
+Optional properties:
+- num-cs		: Number of chip selects used.
+			  If a decoder is used, this will be the number of
+			  chip selects after the decoder.
+- is-decoded-cs		: Flag to indicate whether decoder is used or not.
+
+Example:
+
+	spi@e0007000 {
+		compatible = "xlnx,zynq-spi-r1p6";
+		clock-names = "ref_clk", "pclk";
+		clocks = <&clkc 26>, <&clkc 35>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 49 4>;
+		num-cs = <4>;
+		is-decoded-cs = <0>;
+		reg = <0xe0007000 0x1000>;
+	} ;
diff --git a/Bindings/spi/spi-dw.txt b/Bindings/spi/spi-dw.txt
new file mode 100644
index 000000000000..7b63ed601990
--- /dev/null
+++ b/Bindings/spi/spi-dw.txt
@@ -0,0 +1,24 @@
+Synopsys DesignWare SPI master
+
+Required properties:
+- compatible: should be "snps,designware-spi"
+- #address-cells: see spi-bus.txt
+- #size-cells: see spi-bus.txt
+- reg: address and length of the spi master registers
+- interrupts: should contain one interrupt
+- clocks: spi clock phandle
+- num-cs: see spi-bus.txt
+
+Optional properties:
+- cs-gpios: see spi-bus.txt
+
+Example:
+
+spi: spi@4020a000 {
+	compatible = "snps,designware-spi";
+	interrupts = <11 1>;
+	reg = <0x4020a000 0x1000>;
+	clocks = <&pclk>;
+	num-cs = <2>;
+	cs-gpios = <&banka 0 0>;
+};
diff --git a/Bindings/spi/spi-rockchip.txt b/Bindings/spi/spi-rockchip.txt
new file mode 100644
index 000000000000..7bab35575817
--- /dev/null
+++ b/Bindings/spi/spi-rockchip.txt
@@ -0,0 +1,37 @@
+* Rockchip SPI Controller
+
+The Rockchip SPI controller is used to interface with various devices such as flash
+and display controllers using the SPI communication interface.
+
+Required Properties:
+
+- compatible: should be one of the following.
+    "rockchip,rk3066-spi" for rk3066.
+    "rockchip,rk3188-spi", "rockchip,rk3066-spi" for rk3188.
+    "rockchip,rk3288-spi", "rockchip,rk3066-spi" for rk3288.
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+              depends on the interrupt controller.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
+			   the peripheral clock.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+		Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Example:
+
+	spi0: spi@ff110000 {
+		compatible = "rockchip,rk3066-spi";
+		reg = <0xff110000 0x1000>;
+		dmas = <&pdma1 11>, <&pdma1 12>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+	};
diff --git a/Bindings/spi/spi-rspi.txt b/Bindings/spi/spi-rspi.txt
new file mode 100644
index 000000000000..d57d82a74054
--- /dev/null
+++ b/Bindings/spi/spi-rspi.txt
@@ -0,0 +1,61 @@
+Device tree configuration for Renesas RSPI/QSPI driver
+
+Required properties:
+- compatible       : For Renesas Serial Peripheral Interface on legacy SH:
+		     "renesas,rspi-<soctype>", "renesas,rspi" as fallback.
+		     For Renesas Serial Peripheral Interface on RZ/A1H:
+		     "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
+		     For Quad Serial Peripheral Interface on R-Car Gen2:
+		     "renesas,qspi-<soctype>", "renesas,qspi" as fallback.
+		     Examples with soctypes are:
+		        - "renesas,rspi-sh7757" (SH)
+			- "renesas,rspi-r7s72100" (RZ/A1H)
+			- "renesas,qspi-r8a7790" (R-Car H2)
+			- "renesas,qspi-r8a7791" (R-Car M2)
+- reg              : Address start and address range size of the device
+- interrupts       : A list of interrupt-specifiers, one for each entry in
+		     interrupt-names.
+		     If interrupt-names is not present, an interrupt specifier
+		     for a single muxed interrupt.
+- interrupt-names  : A list of interrupt names. Should contain (if present):
+		       - "error" for SPEI,
+		       - "rx" for SPRI,
+		       - "tx" to SPTI,
+		       - "mux" for a single muxed interrupt.
+- interrupt-parent : The phandle for the interrupt controller that
+		     services interrupts for this device.
+- num-cs	   : Number of chip selects. Some RSPI cores have more than 1.
+- #address-cells   : Must be <1>
+- #size-cells      : Must be <0>
+
+Optional properties:
+- clocks           : Must contain a reference to the functional clock.
+
+Pinctrl properties might be needed, too.  See
+Documentation/devicetree/bindings/pinctrl/renesas,*.
+
+Examples:
+
+	spi0: spi@e800c800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800c800 0x24>;
+		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		interrupt-parent = <&gic>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	spi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Bindings/spi/spi-sun4i.txt b/Bindings/spi/spi-sun4i.txt
new file mode 100644
index 000000000000..de827f5a301e
--- /dev/null
+++ b/Bindings/spi/spi-sun4i.txt
@@ -0,0 +1,24 @@
+Allwinner A10 SPI controller
+
+Required properties:
+- compatible: Should be "allwinner,sun4-a10-spi".
+- reg: Should contain register location and length.
+- interrupts: Should contain interrupt.
+- clocks: phandle to the clocks feeding the SPI controller. Two are
+          needed:
+  - "ahb": the gated AHB parent clock
+  - "mod": the parent module clock
+- clock-names: Must contain the clock names described just above
+
+Example:
+
+spi1: spi@01c06000 {
+	compatible = "allwinner,sun4i-a10-spi";
+	reg = <0x01c06000 0x1000>;
+	interrupts = <11>;
+	clocks = <&ahb_gates 21>, <&spi1_clk>;
+	clock-names = "ahb", "mod";
+	status = "disabled";
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
diff --git a/Bindings/spi/spi-sun6i.txt b/Bindings/spi/spi-sun6i.txt
new file mode 100644
index 000000000000..21de73db6a05
--- /dev/null
+++ b/Bindings/spi/spi-sun6i.txt
@@ -0,0 +1,24 @@
+Allwinner A31 SPI controller
+
+Required properties:
+- compatible: Should be "allwinner,sun6i-a31-spi".
+- reg: Should contain register location and length.
+- interrupts: Should contain interrupt.
+- clocks: phandle to the clocks feeding the SPI controller. Two are
+          needed:
+  - "ahb": the gated AHB parent clock
+  - "mod": the parent module clock
+- clock-names: Must contain the clock names described just above
+- resets: phandle to the reset controller asserting this device in
+          reset
+
+Example:
+
+spi1: spi@01c69000 {
+	compatible = "allwinner,sun6i-a31-spi";
+	reg = <0x01c69000 0x1000>;
+	interrupts = <0 66 4>;
+	clocks = <&ahb1_gates 21>, <&spi1_clk>;
+	clock-names = "ahb", "mod";
+	resets = <&ahb1_rst 21>;
+};
diff --git a/Bindings/spi/spi-xtensa-xtfpga.txt b/Bindings/spi/spi-xtensa-xtfpga.txt
new file mode 100644
index 000000000000..b6ebe2bc7041
--- /dev/null
+++ b/Bindings/spi/spi-xtensa-xtfpga.txt
@@ -0,0 +1,9 @@
+Cadence Xtensa XTFPGA platform SPI controller.
+
+This simple SPI master controller is built into xtfpga bitstreams and is used
+to control daughterboard audio codec.
+
+Required properties:
+- compatible: should be "cdns,xtfpga-spi".
+- reg: physical base address of the controller and length of memory mapped
+  region.
diff --git a/Bindings/spmi/qcom,spmi-pmic-arb.txt b/Bindings/spmi/qcom,spmi-pmic-arb.txt
new file mode 100644
index 000000000000..715d0998af8e
--- /dev/null
+++ b/Bindings/spmi/qcom,spmi-pmic-arb.txt
@@ -0,0 +1,61 @@
+Qualcomm SPMI Controller (PMIC Arbiter)
+
+The SPMI PMIC Arbiter is found on the Snapdragon 800 Series.  It is an SPMI
+controller with wrapping arbitration logic to allow for multiple on-chip
+devices to control a single SPMI master.
+
+The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+to slave devices.
+
+See spmi.txt for the generic SPMI controller binding requirements for child
+nodes.
+
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+generic interrupt controller binding documentation.
+
+Required properties:
+- compatible : should be "qcom,spmi-pmic-arb".
+- reg-names  : must contain:
+     "core" - core registers
+     "intr" - interrupt controller registers
+     "cnfg" - configuration registers
+- reg : address + size pairs describing the PMIC arb register sets; order must
+        correspond with the order of entries in reg-names
+- #address-cells : must be set to 2
+- #size-cells : must be set to 0
+- qcom,ee : indicates the active Execution Environment identifier (0-5)
+- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
+- interrupts : interrupt list for the PMIC Arb controller, must contain a
+               single interrupt entry for the peripheral interrupt
+- interrupt-names : corresponding interrupt names for the interrupts
+                    listed in the 'interrupts' property, must contain:
+     "periph_irq" - summary interrupt for PMIC peripherals
+- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
+- #interrupt-cells :  must be set to 4. Interrupts are specified as a 4-tuple:
+    cell 1: slave ID for the requested interrupt (0-15)
+    cell 2: peripheral ID for requested interrupt (0-255)
+    cell 3: the requested peripheral interrupt (0-7)
+    cell 4: interrupt flags indicating level-sense information, as defined in
+            dt-bindings/interrupt-controller/irq.h
+
+Example:
+
+	spmi {
+		compatible = "qcom,spmi-pmic-arb";
+		reg-names = "core", "intr", "cnfg";
+		reg = <0xfc4cf000 0x1000>,
+		      <0xfc4cb000 0x1000>,
+		      <0xfc4ca000 0x1000>;
+
+		interrupt-names = "periph_irq";
+		interrupts = <0 190 0>;
+
+		qcom,ee = <0>;
+		qcom,channel = <0>;
+
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <4>;
+	};
diff --git a/Bindings/spmi/spmi.txt b/Bindings/spmi/spmi.txt
new file mode 100644
index 000000000000..4bb10d161a27
--- /dev/null
+++ b/Bindings/spmi/spmi.txt
@@ -0,0 +1,41 @@
+System Power Management Interface (SPMI) Controller
+
+This document defines a generic set of bindings for use by SPMI controllers.  A
+controller is modelled in device tree as a node with zero or more child nodes,
+each representing a unique slave on the bus.
+
+Required properties:
+- #address-cells : must be set to 2
+- #size-cells : must be set to 0
+
+Child nodes:
+
+An SPMI controller node can contain zero or more child nodes representing slave
+devices on the bus.  Child 'reg' properties are specified as an address, type
+pair.  The address must be in the range 0-15 (4 bits).  The type must be one of
+SPMI_USID (0) or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively.
+These are the identifiers "statically assigned by the system integrator", as
+per the SPMI spec.
+
+Each child node must have one and only one 'reg' entry of type SPMI_USID.
+
+#include <dt-bindings/spmi/spmi.h>
+
+	spmi@.. {
+		compatible = "...";
+		reg = <...>;
+
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		child@0 {
+			compatible = "...";
+			reg = <0 SPMI_USID>;
+		};
+
+		child@7 {
+			compatible = "...";
+			reg = <7 SPMI_USID
+			       3 SPMI_GSID>;
+		};
+	};
diff --git a/Bindings/staging/imx-drm/hdmi.txt b/Bindings/staging/imx-drm/hdmi.txt
new file mode 100644
index 000000000000..1b756cf9afb0
--- /dev/null
+++ b/Bindings/staging/imx-drm/hdmi.txt
@@ -0,0 +1,58 @@
+Device-Tree bindings for HDMI Transmitter
+
+HDMI Transmitter
+================
+
+The HDMI Transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+with accompanying PHY IP.
+
+Required properties:
+ - #address-cells : should be <1>
+ - #size-cells : should be <0>
+ - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
+ - gpr : should be <&gpr>.
+   The phandle points to the iomuxc-gpr region containing the HDMI
+   multiplexer control register.
+ - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described
+   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
+   Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ - port@[0-4]: Up to four port nodes with endpoint definitions as defined in
+   Documentation/devicetree/bindings/media/video-interfaces.txt,
+   corresponding to the four inputs to the HDMI multiplexer.
+
+Optional properties:
+ - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+
+example:
+
+	gpr: iomuxc-gpr@020e0000 {
+		/* ... */
+	};
+
+        hdmi: hdmi@0120000 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "fsl,imx6q-hdmi";
+                reg = <0x00120000 0x9000>;
+                interrupts = <0 115 0x04>;
+                gpr = <&gpr>;
+                clocks = <&clks 123>, <&clks 124>;
+                clock-names = "iahb", "isfr";
+                ddc-i2c-bus = <&i2c2>;
+
+                port@0 {
+                        reg = <0>;
+
+                        hdmi_mux_0: endpoint {
+                                remote-endpoint = <&ipu1_di0_hdmi>;
+                        };
+                };
+
+                port@1 {
+                        reg = <1>;
+
+                        hdmi_mux_1: endpoint {
+                                remote-endpoint = <&ipu1_di1_hdmi>;
+                        };
+                };
+        };
diff --git a/Bindings/thermal/st-thermal.txt b/Bindings/thermal/st-thermal.txt
new file mode 100644
index 000000000000..3b9251b4a145
--- /dev/null
+++ b/Bindings/thermal/st-thermal.txt
@@ -0,0 +1,42 @@
+Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
+
+Required parameters:
+-------------------
+
+compatible : 	st,<SoC>-<module>-thermal; should be one of:
+		  "st,stih415-sas-thermal",
+		  "st,stih415-mpe-thermal",
+		  "st,stih416-sas-thermal"
+		  "st,stih416-mpe-thermal"
+		  "st,stid127-thermal" or
+		  "st,stih407-thermal"
+		according to the SoC type (stih415, stih416, stid127, stih407)
+		and module type (sas or mpe). On stid127 & stih407 there is only
+		one die/module, so there is no module type in the compatible
+		string.
+clock-names : 	Should be "thermal".
+		  See: Documentation/devicetree/bindings/resource-names.txt
+clocks : 	Phandle of the clock used by the thermal sensor.
+		  See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional parameters:
+-------------------
+
+reg : 		For non-sysconf based sensors, this should be the physical base
+		address and length of the sensor's registers.
+interrupts :	Standard way to define interrupt number.
+		Interrupt is mandatory to be defined when compatible is
+		"stih416-mpe-thermal".
+		  NB: For thermal sensor's for which no interrupt has been
+		  defined, a polling delay of 1000ms will be used to read the
+		  temperature from device.
+
+Example:
+
+	temp1@fdfe8000 {
+		compatible	= "st,stih416-mpe-thermal";
+		reg		= <0xfdfe8000 0x10>;
+		clock-names	= "thermal";
+		clocks		= <&clk_m_mpethsens>;
+		interrupts	= <GIC_SPI 23 IRQ_TYPE_NONE>;
+	};
diff --git a/Bindings/timer/cirrus,clps711x-timer.txt b/Bindings/timer/cirrus,clps711x-timer.txt
new file mode 100644
index 000000000000..cd55b52548e4
--- /dev/null
+++ b/Bindings/timer/cirrus,clps711x-timer.txt
@@ -0,0 +1,29 @@
+* Cirrus Logic CLPS711X Timer Counter
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-timer".
+- reg       : Address and length of the register set.
+- interrupts: The interrupt number of the timer.
+- clocks    : phandle of timer reference clock.
+
+Note: Each timer should have an alias correctly numbered in "aliases" node.
+
+Example:
+	aliases {
+		timer0 = &timer1;
+		timer1 = &timer2;
+	};
+
+	timer1: timer@80000300 {
+		compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+		reg = <0x80000300 0x4>;
+		interrupts = <8>;
+		clocks = <&clks 5>;
+	};
+
+	timer2: timer@80000340 {
+		compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer";
+		reg = <0x80000340 0x4>;
+		interrupts = <9>;
+		clocks = <&clks 6>;
+	};
diff --git a/Bindings/timer/energymicro,efm32-timer.txt b/Bindings/timer/energymicro,efm32-timer.txt
new file mode 100644
index 000000000000..e502c11b2211
--- /dev/null
+++ b/Bindings/timer/energymicro,efm32-timer.txt
@@ -0,0 +1,23 @@
+* EFM32 timer hardware
+
+The efm32 Giant Gecko SoCs come with four 16 bit timers. Two counters can be
+connected to form a 32 bit counter. Each timer has three Compare/Capture
+channels and can be used as PWM or Quadrature Decoder. Available clock sources
+are the cpu's HFPERCLK (with a 10-bit prescaler) or an external pin.
+
+Required properties:
+- compatible : Should be "energymicro,efm32-timer"
+- reg : Address and length of the register set
+- clocks : Should contain a reference to the HFPERCLK
+
+Optional properties:
+- interrupts : Reference to the timer interrupt
+
+Example:
+
+timer@40010c00 {
+	compatible = "energymicro,efm32-timer";
+	reg = <0x40010c00 0x400>;
+	interrupts = <14>;
+	clocks = <&cmu clk_HFPERCLKTIMER3>;
+};
diff --git a/Bindings/timer/fsl,ftm-timer.txt b/Bindings/timer/fsl,ftm-timer.txt
new file mode 100644
index 000000000000..aa8c40230e5e
--- /dev/null
+++ b/Bindings/timer/fsl,ftm-timer.txt
@@ -0,0 +1,31 @@
+Freescale FlexTimer Module (FTM) Timer
+
+Required properties:
+
+- compatible : should be "fsl,ftm-timer"
+- reg : Specifies base physical address and size of the register sets for the
+  clock event device and clock source device.
+- interrupts : Should be the clock event device interrupt.
+- clocks : The clocks provided by the SoC to drive the timer, must contain an
+  entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  o "ftm-evt"
+  o "ftm-src"
+  o "ftm-evt-counter-en"
+  o "ftm-src-counter-en"
+- big-endian: One boolean property, the big endian mode will be in use if it is
+  present, or the little endian mode will be in use for all the device registers.
+
+Example:
+ftm: ftm@400b8000 {
+	compatible = "fsl,ftm-timer";
+	reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+	interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "ftm-evt", "ftm-src",
+		"ftm-evt-counter-en", "ftm-src-counter-en";
+	clocks = <&clks VF610_CLK_FTM2>,
+		<&clks VF610_CLK_FTM3>,
+		<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+		<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+	big-endian;
+};
diff --git a/Bindings/timer/mediatek,mtk-timer.txt b/Bindings/timer/mediatek,mtk-timer.txt
new file mode 100644
index 000000000000..7c4408ff4b83
--- /dev/null
+++ b/Bindings/timer/mediatek,mtk-timer.txt
@@ -0,0 +1,17 @@
+Mediatek MT6577, MT6572 and MT6589 Timers
+---------------------------------------
+
+Required properties:
+- compatible: Should be "mediatek,mt6577-timer"
+- reg: Should contain location and length for timers register.
+- clocks: Clocks driving the timer hardware. This list should include two
+	clocks. The order is system clock and as second clock the RTC clock.
+
+Examples:
+
+	timer@10008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+	};
diff --git a/Bindings/timer/renesas,cmt.txt b/Bindings/timer/renesas,cmt.txt
new file mode 100644
index 000000000000..a17418b0ece3
--- /dev/null
+++ b/Bindings/timer/renesas,cmt.txt
@@ -0,0 +1,47 @@
+* Renesas R-Car Compare Match Timer (CMT)
+
+The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock
+inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. A particular CMT instance can implement only a subset of the
+channels supported by the CMT model. Channel indices represent the hardware
+position of the channel in the CMT and don't match the channel numbers in the
+datasheets.
+
+Required Properties:
+
+  - compatible: must contain one of the following.
+    - "renesas,cmt-32" for the 32-bit CMT
+		(CMT0 on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support
+		(CMT[234] on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-48" for the 48-bit CMT
+		(CMT1 on sh7372, sh73a0 and r8a7740)
+    - "renesas,cmt-48-gen2" for the second generation 48-bit CMT
+		(CMT[01] on r8a73a4, r8a7790 and r8a7791)
+
+  - reg: base address and length of the registers block for the timer module.
+  - interrupts: interrupt-specifier for the timer, one per channel.
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+  - renesas,channels-mask: bitmask of the available channels.
+
+
+Example: R8A7790 (R-Car H2) CMT0 node
+
+	CMT0 on R8A7790 implements hardware channels 5 and 6 only and names
+	them channels 0 and 1 in the documentation.
+
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x60>;
+	};
diff --git a/Bindings/timer/renesas,mtu2.txt b/Bindings/timer/renesas,mtu2.txt
new file mode 100644
index 000000000000..917453f826bc
--- /dev/null
+++ b/Bindings/timer/renesas,mtu2.txt
@@ -0,0 +1,39 @@
+* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2)
+
+The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
+clock inputs and programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The MTU2 hardware supports five channels indexed from 0 to 4.
+
+Required Properties:
+
+  - compatible: must contain "renesas,mtu2"
+
+  - reg: base address and length of the registers block for the timer module.
+
+  - interrupts: interrupt specifiers for the timer, one for each entry in
+    interrupt-names.
+  - interrupt-names: must contain one entry named "tgi?a" for each enabled
+    channel, where "?" is the channel index expressed as one digit from "0" to
+    "4".
+
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+
+Example: R7S72100 (RZ/A1H) MTU2 node
+
+	mtu2: timer@fcff0000 {
+		compatible = "renesas,mtu2";
+		reg = <0xfcff0000 0x400>;
+		interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 154 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 159 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a";
+		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+		clock-names = "fck";
+	};
diff --git a/Bindings/timer/renesas,tmu.txt b/Bindings/timer/renesas,tmu.txt
new file mode 100644
index 000000000000..425d0c5f4aee
--- /dev/null
+++ b/Bindings/timer/renesas,tmu.txt
@@ -0,0 +1,39 @@
+* Renesas R-Car Timer Unit (TMU)
+
+The TMU is a 32-bit timer/counter with configurable clock inputs and
+programmable compare match.
+
+Channels share hardware resources but their counter and compare match value
+are independent. The TMU hardware supports up to three channels.
+
+Required Properties:
+
+  - compatible: must contain "renesas,tmu"
+
+  - reg: base address and length of the registers block for the timer module.
+
+  - interrupts: interrupt-specifier for the timer, one per channel.
+
+  - clocks: a list of phandle + clock-specifier pairs, one for each entry
+    in clock-names.
+  - clock-names: must contain "fck" for the functional clock.
+
+Optional Properties:
+
+  - #renesas,channels: number of channels implemented by the timer, must be 2
+    or 3 (if not specified the value defaults to 3).
+
+
+Example: R8A7779 (R-Car H1) TMU0 node
+
+	tmu0: timer@ffd80000 {
+		compatible = "renesas,tmu";
+		reg = <0xffd80000 0x30>;
+		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+		clock-names = "fck";
+
+		#renesas,channels = <3>;
+	};
diff --git a/Bindings/timer/ti,keystone-timer.txt b/Bindings/timer/ti,keystone-timer.txt
new file mode 100644
index 000000000000..5fbe361252b4
--- /dev/null
+++ b/Bindings/timer/ti,keystone-timer.txt
@@ -0,0 +1,29 @@
+* Device tree bindings for Texas instruments Keystone timer
+
+This document provides bindings for the 64-bit timer in the KeyStone
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+It is global timer is a free running up-counter and can generate interrupt
+when the counter reaches preset counter values.
+
+Documentation:
+http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
+Required properties:
+
+- compatible : should be "ti,keystone-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupt generated by the timer.
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+timer@22f0000 {
+	compatible = "ti,keystone-timer";
+	reg = <0x022f0000 0x80>;
+	interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&clktimer15>;
+};
diff --git a/Bindings/usb/ci-hdrc-qcom.txt b/Bindings/usb/ci-hdrc-qcom.txt
new file mode 100644
index 000000000000..f2899b550939
--- /dev/null
+++ b/Bindings/usb/ci-hdrc-qcom.txt
@@ -0,0 +1,17 @@
+Qualcomm CI13xxx (Chipidea) USB controllers
+
+Required properties:
+- compatible:   should contain "qcom,ci-hdrc"
+- reg:          offset and length of the register set in the memory map
+- interrupts:   interrupt-specifier for the controller interrupt.
+- usb-phy:      phandle for the PHY device
+- dr_mode:      Should be "peripheral"
+
+Examples:
+	gadget@f9a55000 {
+		compatible = "qcom,ci-hdrc";
+		reg = <0xf9a55000 0x400>;
+		dr_mode = "peripheral";
+		interrupts = <0 134 0>;
+		usb-phy = <&usbphy0>;
+	};
diff --git a/Bindings/usb/ci-hdrc-zevio.txt b/Bindings/usb/ci-hdrc-zevio.txt
new file mode 100644
index 000000000000..abbcb2aea38c
--- /dev/null
+++ b/Bindings/usb/ci-hdrc-zevio.txt
@@ -0,0 +1,17 @@
+* LSI Zevio USB OTG Controller
+
+Required properties:
+- compatible: Should be "lsi,zevio-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+
+Optional properties:
+- vbus-supply: regulator for vbus
+
+Examples:
+		usb0: usb@b0000000 {
+			reg = <0xb0000000 0x1000>;
+			compatible = "lsi,zevio-usb";
+			interrupts = <8>;
+			vbus-supply = <&vbus_reg>;
+		};
diff --git a/Bindings/usb/usb-ohci.txt b/Bindings/usb/usb-ohci.txt
new file mode 100644
index 000000000000..b968a1aea995
--- /dev/null
+++ b/Bindings/usb/usb-ohci.txt
@@ -0,0 +1,26 @@
+USB OHCI controllers
+
+Required properties:
+- compatible : "generic-ohci"
+- reg : ohci controller register range (address and length)
+- interrupts : ohci controller interrupt
+
+Optional properties:
+- big-endian-regs : boolean, set this for hcds with big-endian registers
+- big-endian-desc : boolean, set this for hcds with big-endian descriptors
+- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+- clocks : a list of phandle + clock specifier pairs
+- phys : phandle + phy specifier pair
+- phy-names : "usb"
+- resets : phandle + reset specifier pair
+
+Example:
+
+	ohci0: usb@01c14400 {
+		compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+		reg = <0x01c14400 0x100>;
+		interrupts = <64>;
+		clocks = <&usb_clk 6>, <&ahb_gates 2>;
+		phys = <&usbphy 1>;
+		phy-names = "usb";
+	};
diff --git a/Bindings/usb/usb-uhci.txt b/Bindings/usb/usb-uhci.txt
new file mode 100644
index 000000000000..298133416c97
--- /dev/null
+++ b/Bindings/usb/usb-uhci.txt
@@ -0,0 +1,15 @@
+Generic Platform UHCI Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "generic-uhci" (deprecated: "platform-uhci")
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : UHCI controller interrupt
+
+Example:
+
+	uhci@d8007b00 {
+		compatible = "generic-uhci";
+		reg = <0xd8007b00 0x200>;
+		interrupts = <43>;
+	};
diff --git a/Bindings/video/analog-tv-connector.txt b/Bindings/video/analog-tv-connector.txt
new file mode 100644
index 000000000000..0218fcdc1299
--- /dev/null
+++ b/Bindings/video/analog-tv-connector.txt
@@ -0,0 +1,25 @@
+Analog TV Connector
+===================
+
+Required properties:
+- compatible: "composite-connector" or "svideo-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+
+Required nodes:
+- Video port for TV input
+
+Example
+-------
+
+tv: connector {
+	compatible = "composite-connector";
+	label = "tv";
+
+	port {
+		tv_connector_in: endpoint {
+			remote-endpoint = <&venc_out>;
+		};
+	};
+};
diff --git a/Bindings/video/arm,pl11x.txt b/Bindings/video/arm,pl11x.txt
new file mode 100644
index 000000000000..3e3039a8a253
--- /dev/null
+++ b/Bindings/video/arm,pl11x.txt
@@ -0,0 +1,109 @@
+* ARM PrimeCell Color LCD Controller PL110/PL111
+
+See also Documentation/devicetree/bindings/arm/primecell.txt
+
+Required properties:
+
+- compatible: must be one of:
+	"arm,pl110", "arm,primecell"
+	"arm,pl111", "arm,primecell"
+
+- reg: base address and size of the control registers block
+
+- interrupt-names: either the single entry "combined" representing a
+	combined interrupt output (CLCDINTR), or the four entries
+	"mbe", "vcomp", "lnbu", "fuf" representing the individual
+	CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
+
+- interrupts: contains an interrupt specifier for each entry in
+	interrupt-names
+
+- clock-names: should contain "clcdclk" and "apb_pclk"
+
+- clocks: contains phandle and clock specifier pairs for the entries
+	in the clock-names property. See
+	Documentation/devicetree/binding/clock/clock-bindings.txt
+
+Optional properties:
+
+- memory-region: phandle to a node describing memory (see
+	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+	to be used for the framebuffer; if not present, the framebuffer
+	may be located anywhere in the memory
+
+- max-memory-bandwidth: maximum bandwidth in bytes per second that the
+	cell's memory interface can handle; if not present, the memory
+	interface is fast enough to handle all possible video modes
+
+Required sub-nodes:
+
+- port: describes LCD panel signals, following the common binding
+	for video transmitter interfaces; see
+	Documentation/devicetree/bindings/media/video-interfaces.txt;
+	when it is a TFT panel, the port's endpoint must define the
+	following property:
+
+	- arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
+		defining the way CLD pads are wired up; first value
+		contains index of the "CLD" external pin (pad) used
+		as R0 (first bit of the red component), second value
+	        index of the pad used as G0, third value index of the
+		pad used as B0, see also "LCD panel signal multiplexing
+		details" paragraphs in the PL110/PL111 Technical
+		Reference Manuals; this implicitly defines available
+		color modes, for example:
+		- PL111 TFT 4:4:4 panel:
+			arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+		- PL110 TFT (1:)5:5:5 panel:
+			arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+		- PL111 TFT (1:)5:5:5 panel:
+			arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+		- PL111 TFT 5:6:5 panel:
+			arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+		- PL110 and PL111 TFT 8:8:8 panel:
+			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+		- PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+			arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+
+Example:
+
+	clcd@10020000 {
+		compatible = "arm,pl111", "arm,primecell";
+		reg = <0x10020000 0x1000>;
+		interrupt-names = "combined";
+		interrupts = <0 44 4>;
+		clocks = <&oscclk1>, <&oscclk2>;
+		clock-names = "clcdclk", "apb_pclk";
+		max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+		port {
+			clcd_pads: endpoint {
+				remote-endpoint = <&clcd_panel>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+
+	};
+
+	panel {
+		compatible = "panel-dpi";
+
+		port {
+			clcd_panel: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <25175000>;
+			hactive = <640>;
+			hback-porch = <40>;
+			hfront-porch = <24>;
+			hsync-len = <96>;
+			vactive = <480>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <2>;
+		};
+	};
diff --git a/Bindings/video/backlight/gpio-backlight.txt b/Bindings/video/backlight/gpio-backlight.txt
new file mode 100644
index 000000000000..321be6640533
--- /dev/null
+++ b/Bindings/video/backlight/gpio-backlight.txt
@@ -0,0 +1,16 @@
+gpio-backlight bindings
+
+Required properties:
+  - compatible: "gpio-backlight"
+  - gpios: describes the gpio that is used for enabling/disabling the backlight.
+    refer to bindings/gpio/gpio.txt for more details.
+
+Optional properties:
+  - default-on: enable the backlight at boot.
+
+Example:
+	backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
diff --git a/Bindings/video/cirrus,clps711x-fb.txt b/Bindings/video/cirrus,clps711x-fb.txt
new file mode 100644
index 000000000000..6fc3c6adeefa
--- /dev/null
+++ b/Bindings/video/cirrus,clps711x-fb.txt
@@ -0,0 +1,47 @@
+* Currus Logic CLPS711X Framebuffer
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-fb".
+- reg       : Physical base address and length of the controller's registers +
+              location and size of the framebuffer memory.
+- clocks    : phandle + clock specifier pair of the FB reference clock.
+- display   : phandle to a display node as described in
+              Documentation/devicetree/bindings/video/display-timing.txt.
+              Additionally, the display node has to define properties:
+  - bits-per-pixel: Bits per pixel.
+  - ac-prescale   : LCD AC bias frequency. This frequency is the required
+                    AC bias frequency for a given manufacturer's LCD plate.
+  - cmap-invert   : Invert the color levels (Optional).
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+
+Example:
+	fb: fb@800002c0 {
+		compatible = "cirrus,ep7312-fb", "cirrus,clps711x-fb";
+		reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+		clocks = <&clks 2>;
+		lcd-supply = <&reg5v0>;
+		display = <&display>;
+	};
+
+	display: display {
+		model = "320x240x4";
+		native-mode = <&timing0>;
+		bits-per-pixel = <4>;
+		ac-prescale = <17>;
+
+		display-timings {
+			timing0: 320x240 {
+				hactive = <320>;
+				hback-porch = <0>;
+				hfront-porch = <0>;
+				hsync-len = <0>;
+				vactive = <240>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <0>;
+				clock-frequency = <6500000>;
+			};
+		};
+	};
diff --git a/Bindings/video/dvi-connector.txt b/Bindings/video/dvi-connector.txt
new file mode 100644
index 000000000000..fc53f7c60bc6
--- /dev/null
+++ b/Bindings/video/dvi-connector.txt
@@ -0,0 +1,35 @@
+DVI Connector
+==============
+
+Required properties:
+- compatible: "dvi-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC
+- analog: the connector has DVI analog pins
+- digital: the connector has DVI digital pins
+- dual-link: the connector has pins for DVI dual-link
+
+Required nodes:
+- Video port for DVI input
+
+Note: One (or both) of 'analog' or 'digital' must be set.
+
+Example
+-------
+
+dvi0: connector@0 {
+	compatible = "dvi-connector";
+	label = "dvi";
+
+	digital;
+
+	ddc-i2c-bus = <&i2c3>;
+
+	port {
+		dvi_connector_in: endpoint {
+			remote-endpoint = <&tfp410_out>;
+		};
+	};
+};
diff --git a/Bindings/video/exynos_dsim.txt b/Bindings/video/exynos_dsim.txt
new file mode 100644
index 000000000000..31036c667d54
--- /dev/null
+++ b/Bindings/video/exynos_dsim.txt
@@ -0,0 +1,82 @@
+Exynos MIPI DSI Master
+
+Required properties:
+  - compatible: value should be one of the following
+		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
+		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
+  - reg: physical base address and length of the registers set for the device
+  - interrupts: should contain DSI interrupt
+  - clocks: list of clock specifiers, must contain an entry for each required
+    entry in clock-names
+  - clock-names: should include "bus_clk"and "pll_clk" entries
+  - phys: list of phy specifiers, must contain an entry for each required
+    entry in phy-names
+  - phy-names: should include "dsim" entry
+  - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
+  - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
+  - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock
+  - #address-cells, #size-cells: should be set respectively to <1> and <0>
+    according to DSI host bindings (see MIPI DSI bindings [1])
+
+Optional properties:
+  - samsung,power-domain: a phandle to DSIM power domain node
+
+Child nodes:
+  Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
+
+Video interfaces:
+  Device node can contain video interface port nodes according to [2].
+  The following are properties specific to those nodes:
+
+  port node:
+    - reg: (required) can be 0 for input RGB/I80 port or 1 for DSI port;
+
+  endpoint node of DSI port (reg = 1):
+    - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
+      mode
+    - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
+
+[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	dsi@11C80000 {
+		compatible = "samsung,exynos4210-mipi-dsi";
+		reg = <0x11C80000 0x10000>;
+		interrupts = <0 79 0>;
+		clocks = <&clock 286>, <&clock 143>;
+		clock-names = "bus_clk", "pll_clk";
+		phys = <&mipi_phy 1>;
+		phy-names = "dsim";
+		vddcore-supply = <&vusb_reg>;
+		vddio-supply = <&vmipi_reg>;
+		samsung,power-domain = <&pd_lcd0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,pll-clock-frequency = <24000000>;
+
+		panel@1 {
+			reg = <0>;
+			...
+			port {
+				panel_ep: endpoint {
+					remote-endpoint = <&dsi_ep>;
+				};
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				dsi_ep: endpoint {
+					reg = <0>;
+					samsung,burst-clock-frequency = <500000000>;
+					samsung,esc-clock-frequency = <20000000>;
+					remote-endpoint = <&panel_ep>;
+				};
+			};
+		};
+	};
diff --git a/Bindings/video/hdmi-connector.txt b/Bindings/video/hdmi-connector.txt
new file mode 100644
index 000000000000..acd5668b1ce1
--- /dev/null
+++ b/Bindings/video/hdmi-connector.txt
@@ -0,0 +1,29 @@
+HDMI Connector
+==============
+
+Required properties:
+- compatible: "hdmi-connector"
+- type: the HDMI connector type: "a", "b", "c", "d" or "e"
+
+Optional properties:
+- label: a symbolic name for the connector
+- hpd-gpios: HPD GPIO number
+
+Required nodes:
+- Video port for HDMI input
+
+Example
+-------
+
+hdmi0: connector@1 {
+	compatible = "hdmi-connector";
+	label = "hdmi";
+
+	type = "a";
+
+	port {
+		hdmi_connector_in: endpoint {
+			remote-endpoint = <&tpd12s015_out>;
+		};
+	};
+};
diff --git a/Bindings/video/lgphilips,lb035q02.txt b/Bindings/video/lgphilips,lb035q02.txt
new file mode 100644
index 000000000000..1a1e653e5407
--- /dev/null
+++ b/Bindings/video/lgphilips,lb035q02.txt
@@ -0,0 +1,33 @@
+LG.Philips LB035Q02 Panel
+=========================
+
+Required properties:
+- compatible: "lgphilips,lb035q02"
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+	compatible = "lgphilips,lb035q02";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+
+	enable-gpios = <&gpio7 7 0>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
diff --git a/Bindings/video/panel-dpi.txt b/Bindings/video/panel-dpi.txt
new file mode 100644
index 000000000000..a40180b05bab
--- /dev/null
+++ b/Bindings/video/panel-dpi.txt
@@ -0,0 +1,45 @@
+Generic MIPI DPI Panel
+======================
+
+Required properties:
+- compatible: "panel-dpi"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: panel enable gpio
+
+Required nodes:
+- "panel-timing" containing video timings
+  (Documentation/devicetree/bindings/video/display-timing.txt)
+- Video port for DPI input
+
+Example
+-------
+
+lcd0: display@0 {
+        compatible = "samsung,lte430wq-f0c", "panel-dpi";
+        label = "lcd";
+
+        port {
+            lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+            };
+        };
+
+        panel-timing {
+                clock-frequency = <9200000>;
+                hactive = <480>;
+                vactive = <272>;
+                hfront-porch = <8>;
+                hback-porch = <4>;
+                hsync-len = <41>;
+                vback-porch = <2>;
+                vfront-porch = <4>;
+                vsync-len = <10>;
+
+                hsync-active = <0>;
+                vsync-active = <0>;
+                de-active = <1>;
+                pixelclk-active = <1>;
+        };
+};
diff --git a/Bindings/video/panel-dsi-cm.txt b/Bindings/video/panel-dsi-cm.txt
new file mode 100644
index 000000000000..dce48eb9db57
--- /dev/null
+++ b/Bindings/video/panel-dsi-cm.txt
@@ -0,0 +1,29 @@
+Generic MIPI DSI Command Mode Panel
+===================================
+
+Required properties:
+- compatible: "panel-dsi-cm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+- te-gpios: panel TE gpio
+
+Required nodes:
+- Video port for DSI input
+
+Example
+-------
+
+lcd0: display {
+	compatible = "tpo,taal", "panel-dsi-cm";
+	label = "lcd0";
+
+	reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd0_in: endpoint {
+			remote-endpoint = <&dsi1_out_ep>;
+		};
+	};
+};
diff --git a/Bindings/video/sharp,ls037v7dw01.txt b/Bindings/video/sharp,ls037v7dw01.txt
new file mode 100644
index 000000000000..0cc8981e9d49
--- /dev/null
+++ b/Bindings/video/sharp,ls037v7dw01.txt
@@ -0,0 +1,43 @@
+SHARP LS037V7DW01 TFT-LCD panel
+===================================
+
+Required properties:
+- compatible: "sharp,ls037v7dw01"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: a GPIO spec for the optional enable pin.
+  This pin is the INI pin as specified in the LS037V7DW01.pdf file.
+- reset-gpios: a GPIO spec for the optional reset pin.
+  This pin is the RESB pin as specified in the LS037V7DW01.pdf file.
+- mode-gpios: a GPIO
+  ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file.
+
+Required nodes:
+- Video port for DPI input
+
+This panel can have zero to five GPIOs to configure to change configuration
+between QVGA and VGA mode and the scan direction. As these pins can be also
+configured with external pulls, all the GPIOs are considered optional with holes
+in the array.
+
+Example
+-------
+
+Example when connected to a omap2+ based device:
+
+lcd0: display {
+	compatible = "sharp,ls037v7dw01";
+	power-supply = <&lcd_3v3>;
+	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
+	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
+	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
+		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
+		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
diff --git a/Bindings/video/sony,acx565akm.txt b/Bindings/video/sony,acx565akm.txt
new file mode 100644
index 000000000000..e12333280749
--- /dev/null
+++ b/Bindings/video/sony,acx565akm.txt
@@ -0,0 +1,30 @@
+Sony ACX565AKM SDI Panel
+========================
+
+Required properties:
+- compatible: "sony,acx565akm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+
+Required nodes:
+- Video port for SDI input
+
+Example
+-------
+
+acx565akm@2 {
+	compatible = "sony,acx565akm";
+	spi-max-frequency = <6000000>;
+	reg = <2>;
+
+	label = "lcd";
+	reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&sdi_out>;
+		};
+	};
+};
diff --git a/Bindings/video/ti,omap-dss.txt b/Bindings/video/ti,omap-dss.txt
new file mode 100644
index 000000000000..d5f1a3fe3109
--- /dev/null
+++ b/Bindings/video/ti,omap-dss.txt
@@ -0,0 +1,211 @@
+Texas Instruments OMAP Display Subsystem
+========================================
+
+Generic Description
+-------------------
+
+This document is a generic description of the OMAP Display Subsystem bindings.
+Binding details for each OMAP SoC version are described in respective binding
+documentation.
+
+The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and
+a number of encoder modules. All DSS versions contain DSS Core and DISPC, but
+the encoder modules vary.
+
+The DSS Core is the parent of the other DSS modules, and manages clock routing,
+integration to the SoC, etc.
+
+DISPC is the display controller, which reads pixels from the memory and outputs
+a RGB pixel stream to encoders.
+
+The encoder modules encode the received RGB pixel stream to a video output like
+HDMI, MIPI DPI, etc.
+
+Video Ports
+-----------
+
+The DSS Core and the encoders have video port outputs. The structure of the
+video ports is described in Documentation/devicetree/bindings/video/video-
+ports.txt, and the properties for the ports and endpoints for each encoder are
+described in the SoC's DSS binding documentation.
+
+The video ports are used to describe the connections to external hardware, like
+panels or external encoders.
+
+Aliases
+-------
+
+The board dts file may define aliases for displays to assign "displayX" style
+name for each display. If no aliases are defined, a semi-random number is used
+for the display.
+
+Example
+-------
+
+A shortened example of the DSS description for OMAP4, with non-relevant parts
+removed, defined in omap4.dtsi:
+
+dss: dss@58000000 {
+	compatible = "ti,omap4-dss";
+	reg = <0x58000000 0x80>;
+	status = "disabled";
+	ti,hwmods = "dss_core";
+	clocks = <&dss_dss_clk>;
+	clock-names = "fck";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	dispc@58001000 {
+		compatible = "ti,omap4-dispc";
+		reg = <0x58001000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "dss_dispc";
+		clocks = <&dss_dss_clk>;
+		clock-names = "fck";
+	};
+
+	hdmi: encoder@58006000 {
+		compatible = "ti,omap4-hdmi";
+		reg = <0x58006000 0x200>,
+		      <0x58006200 0x100>,
+		      <0x58006300 0x100>,
+		      <0x58006400 0x1000>;
+		reg-names = "wp", "pll", "phy", "core";
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+		ti,hwmods = "dss_hdmi";
+		clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+		clock-names = "fck", "sys_clk";
+	};
+};
+
+A shortened example of the board description for OMAP4 Panda board, defined in
+omap4-panda.dts.
+
+The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
+chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
+shifter). The video pipelines for the connectors are formed as follows:
+
+DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
+OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
+
+/ {
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* 0, power-down */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@1 {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@1 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/Bindings/video/ti,omap2-dss.txt b/Bindings/video/ti,omap2-dss.txt
new file mode 100644
index 000000000000..fa8bb2ed1170
--- /dev/null
+++ b/Bindings/video/ti,omap2-dss.txt
@@ -0,0 +1,54 @@
+Texas Instruments OMAP2 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap2-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+
+Optional nodes:
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap2-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap2-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap2-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+
+VENC Endpoint required properties:
+
+Required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
diff --git a/Bindings/video/ti,omap3-dss.txt b/Bindings/video/ti,omap3-dss.txt
new file mode 100644
index 000000000000..0023fa4b1328
--- /dev/null
+++ b/Bindings/video/ti,omap3-dss.txt
@@ -0,0 +1,83 @@
+Texas Instruments OMAP3 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap3-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video ports:
+	- Port 0: DPI output
+	- Port 1: SDI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+SDI Endpoint required properties:
+- datapairs: number of datapairs used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap3-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap3-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap3-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap3-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
diff --git a/Bindings/video/ti,omap4-dss.txt b/Bindings/video/ti,omap4-dss.txt
new file mode 100644
index 000000000000..b8c29fbd1fbb
--- /dev/null
+++ b/Bindings/video/ti,omap4-dss.txt
@@ -0,0 +1,115 @@
+Texas Instruments OMAP4 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap4-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, VENC, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap4-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap4-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap4-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video port for VENC output
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap4-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap4-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Bindings/video/ti,omap5-dss.txt b/Bindings/video/ti,omap5-dss.txt
new file mode 100644
index 000000000000..38ffc8fcd816
--- /dev/null
+++ b/Bindings/video/ti,omap5-dss.txt
@@ -0,0 +1,96 @@
+Texas Instruments OMAP5 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap5-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap5-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap5-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap5-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+  DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap5-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Bindings/video/ti,tfp410.txt b/Bindings/video/ti,tfp410.txt
new file mode 100644
index 000000000000..2cbe32a3d0bb
--- /dev/null
+++ b/Bindings/video/ti,tfp410.txt
@@ -0,0 +1,41 @@
+TFP410 DPI to DVI encoder
+=========================
+
+Required properties:
+- compatible: "ti,tfp410"
+
+Optional properties:
+- powerdown-gpios: power-down gpio
+
+Required nodes:
+- Video port 0 for DPI input
+- Video port 1 for DVI output
+
+Example
+-------
+
+tfp410: encoder@0 {
+	compatible = "ti,tfp410";
+	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tfp410_in: endpoint@0 {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tfp410_out: endpoint@0 {
+				remote-endpoint = <&dvi_connector_in>;
+			};
+		};
+	};
+};
diff --git a/Bindings/video/ti,tpd12s015.txt b/Bindings/video/ti,tpd12s015.txt
new file mode 100644
index 000000000000..26e6d32e3f20
--- /dev/null
+++ b/Bindings/video/ti,tpd12s015.txt
@@ -0,0 +1,44 @@
+TPD12S015 HDMI level shifter and ESD protection chip
+====================================================
+
+Required properties:
+- compatible: "ti,tpd12s015"
+
+Optional properties:
+- gpios: CT CP HPD, LS OE and HPD gpios
+
+Required nodes:
+- Video port 0 for HDMI input
+- Video port 1 for HDMI output
+
+Example
+-------
+
+tpd12s015: encoder@1 {
+	compatible = "ti,tpd12s015";
+
+	gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+		<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+		<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tpd12s015_in: endpoint@0 {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tpd12s015_out: endpoint@0 {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
diff --git a/Bindings/video/toppoly,td028ttec1.txt b/Bindings/video/toppoly,td028ttec1.txt
new file mode 100644
index 000000000000..7175dc3740ac
--- /dev/null
+++ b/Bindings/video/toppoly,td028ttec1.txt
@@ -0,0 +1,30 @@
+Toppoly TD028TTEC1 Panel
+========================
+
+Required properties:
+- compatible: "toppoly,td028ttec1"
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: td028ttec1@0 {
+	compatible = "toppoly,td028ttec1";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
+
diff --git a/Bindings/video/tpo,td043mtea1.txt b/Bindings/video/tpo,td043mtea1.txt
new file mode 100644
index 000000000000..ec6d62975162
--- /dev/null
+++ b/Bindings/video/tpo,td043mtea1.txt
@@ -0,0 +1,33 @@
+TPO TD043MTEA1 Panel
+====================
+
+Required properties:
+- compatible: "tpo,td043mtea1"
+- reset-gpios: panel reset gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+	compatible = "tpo,td043mtea1";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+
+	reset-gpios = <&gpio7 7 0>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
diff --git a/Bindings/watchdog/of-xilinx-wdt.txt b/Bindings/watchdog/of-xilinx-wdt.txt
new file mode 100644
index 000000000000..6d63782a7378
--- /dev/null
+++ b/Bindings/watchdog/of-xilinx-wdt.txt
@@ -0,0 +1,23 @@
+Xilinx AXI/PLB soft-core watchdog Device Tree Bindings
+---------------------------------------------------------
+
+Required properties:
+- compatible		: Should be "xlnx,xps-timebase-wdt-1.00.a" or
+			  "xlnx,xps-timebase-wdt-1.01.a".
+- reg			: Physical base address and size
+
+Optional properties:
+- clock-frequency	: Frequency of clock in Hz
+- xlnx,wdt-enable-once	: 0 - Watchdog can be restarted
+			  1 - Watchdog can be enabled just once
+- xlnx,wdt-interval	: Watchdog timeout interval in 2^<val> clock cycles,
+			  <val> is integer from 8 to 31.
+
+Example:
+axi-timebase-wdt@40100000 {
+	clock-frequency = <50000000>;
+	compatible = "xlnx,xps-timebase-wdt-1.00.a";
+	reg = <0x40100000 0x10000>;
+	xlnx,wdt-enable-once = <0x0>;
+	xlnx,wdt-interval = <0x1b>;
+} ;
diff --git a/include/dt-bindings/clk/ti-dra7-atl.h b/include/dt-bindings/clk/ti-dra7-atl.h
new file mode 100644
index 000000000000..42dd4164f6f4
--- /dev/null
+++ b/include/dt-bindings/clk/ti-dra7-atl.h
@@ -0,0 +1,40 @@
+/*
+ * This header provides constants for DRA7 ATL (Audio Tracking Logic)
+ *
+ * The constants defined in this header are used in dts files
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_DRA7_ATL_H
+#define _DT_BINDINGS_CLK_DRA7_ATL_H
+
+#define DRA7_ATL_WS_MCASP1_FSR		0
+#define DRA7_ATL_WS_MCASP1_FSX		1
+#define DRA7_ATL_WS_MCASP2_FSR		2
+#define DRA7_ATL_WS_MCASP2_FSX		3
+#define DRA7_ATL_WS_MCASP3_FSX		4
+#define DRA7_ATL_WS_MCASP4_FSX		5
+#define DRA7_ATL_WS_MCASP5_FSX		6
+#define DRA7_ATL_WS_MCASP6_FSX		7
+#define DRA7_ATL_WS_MCASP7_FSX		8
+#define DRA7_ATL_WS_MCASP8_FSX		9
+#define DRA7_ATL_WS_MCASP8_AHCLKX	10
+#define DRA7_ATL_WS_XREF_CLK3		11
+#define DRA7_ATL_WS_XREF_CLK0		12
+#define DRA7_ATL_WS_XREF_CLK1		13
+#define DRA7_ATL_WS_XREF_CLK2		14
+#define DRA7_ATL_WS_OSC1_X1		15
+
+#endif
diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
new file mode 100644
index 000000000000..0b4cb999a3f7
--- /dev/null
+++ b/include/dt-bindings/clock/at91.h
@@ -0,0 +1,22 @@
+/*
+ * This header provides constants for AT91 pmc status.
+ *
+ * The constants defined in this header are being used in dts.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef _DT_BINDINGS_CLK_AT91_H
+#define _DT_BINDINGS_CLK_AT91_H
+
+#define AT91_PMC_MOSCS		0		/* MOSCS Flag */
+#define AT91_PMC_LOCKA		1		/* PLLA Lock */
+#define AT91_PMC_LOCKB		2		/* PLLB Lock */
+#define AT91_PMC_MCKRDY		3		/* Master Clock */
+#define AT91_PMC_LOCKU		6		/* UPLL Lock */
+#define AT91_PMC_PCKRDY(id)	(8 + (id))	/* Programmable Clock */
+#define AT91_PMC_MOSCSELS	16		/* Main Oscillator Selection */
+#define AT91_PMC_MOSCRCS	17		/* Main On-Chip RC */
+#define AT91_PMC_CFDEV		18		/* Clock Failure Detector Event */
+
+#endif
diff --git a/include/dt-bindings/clock/bcm21664.h b/include/dt-bindings/clock/bcm21664.h
new file mode 100644
index 000000000000..5a7f0e4750a8
--- /dev/null
+++ b/include/dt-bindings/clock/bcm21664.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLOCK_BCM21664_H
+#define _CLOCK_BCM21664_H
+
+/*
+ * This file defines the values used to specify clocks provided by
+ * the clock control units (CCUs) on Broadcom BCM21664 family SoCs.
+ */
+
+/* bcm21664 CCU device tree "compatible" strings */
+#define BCM21664_DT_ROOT_CCU_COMPAT	"brcm,bcm21664-root-ccu"
+#define BCM21664_DT_AON_CCU_COMPAT	"brcm,bcm21664-aon-ccu"
+#define BCM21664_DT_MASTER_CCU_COMPAT	"brcm,bcm21664-master-ccu"
+#define BCM21664_DT_SLAVE_CCU_COMPAT	"brcm,bcm21664-slave-ccu"
+
+/* root CCU clock ids */
+
+#define BCM21664_ROOT_CCU_FRAC_1M		0
+#define BCM21664_ROOT_CCU_CLOCK_COUNT		1
+
+/* aon CCU clock ids */
+
+#define BCM21664_AON_CCU_HUB_TIMER		0
+#define BCM21664_AON_CCU_CLOCK_COUNT		1
+
+/* master CCU clock ids */
+
+#define BCM21664_MASTER_CCU_SDIO1		0
+#define BCM21664_MASTER_CCU_SDIO2		1
+#define BCM21664_MASTER_CCU_SDIO3		2
+#define BCM21664_MASTER_CCU_SDIO4		3
+#define BCM21664_MASTER_CCU_SDIO1_SLEEP		4
+#define BCM21664_MASTER_CCU_SDIO2_SLEEP		5
+#define BCM21664_MASTER_CCU_SDIO3_SLEEP		6
+#define BCM21664_MASTER_CCU_SDIO4_SLEEP		7
+#define BCM21664_MASTER_CCU_CLOCK_COUNT		8
+
+/* slave CCU clock ids */
+
+#define BCM21664_SLAVE_CCU_UARTB		0
+#define BCM21664_SLAVE_CCU_UARTB2		1
+#define BCM21664_SLAVE_CCU_UARTB3		2
+#define BCM21664_SLAVE_CCU_BSC1			3
+#define BCM21664_SLAVE_CCU_BSC2			4
+#define BCM21664_SLAVE_CCU_BSC3			5
+#define BCM21664_SLAVE_CCU_BSC4			6
+#define BCM21664_SLAVE_CCU_CLOCK_COUNT		7
+
+#endif /* _CLOCK_BCM21664_H */
diff --git a/include/dt-bindings/clock/bcm281xx.h b/include/dt-bindings/clock/bcm281xx.h
new file mode 100644
index 000000000000..a763460cf1af
--- /dev/null
+++ b/include/dt-bindings/clock/bcm281xx.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLOCK_BCM281XX_H
+#define _CLOCK_BCM281XX_H
+
+/*
+ * This file defines the values used to specify clocks provided by
+ * the clock control units (CCUs) on Broadcom BCM281XX family SoCs.
+ */
+
+/*
+ * These are the bcm281xx CCU device tree "compatible" strings.
+ * We're stuck with using "bcm11351" in the string because wild
+ * cards aren't allowed, and that name was the first one defined
+ * in this family of devices.
+ */
+#define BCM281XX_DT_ROOT_CCU_COMPAT	"brcm,bcm11351-root-ccu"
+#define BCM281XX_DT_AON_CCU_COMPAT	"brcm,bcm11351-aon-ccu"
+#define BCM281XX_DT_HUB_CCU_COMPAT	"brcm,bcm11351-hub-ccu"
+#define BCM281XX_DT_MASTER_CCU_COMPAT	"brcm,bcm11351-master-ccu"
+#define BCM281XX_DT_SLAVE_CCU_COMPAT	"brcm,bcm11351-slave-ccu"
+
+/* root CCU clock ids */
+
+#define BCM281XX_ROOT_CCU_FRAC_1M		0
+#define BCM281XX_ROOT_CCU_CLOCK_COUNT		1
+
+/* aon CCU clock ids */
+
+#define BCM281XX_AON_CCU_HUB_TIMER		0
+#define BCM281XX_AON_CCU_PMU_BSC		1
+#define BCM281XX_AON_CCU_PMU_BSC_VAR		2
+#define BCM281XX_AON_CCU_CLOCK_COUNT		3
+
+/* hub CCU clock ids */
+
+#define BCM281XX_HUB_CCU_TMON_1M		0
+#define BCM281XX_HUB_CCU_CLOCK_COUNT		1
+
+/* master CCU clock ids */
+
+#define BCM281XX_MASTER_CCU_SDIO1		0
+#define BCM281XX_MASTER_CCU_SDIO2		1
+#define BCM281XX_MASTER_CCU_SDIO3		2
+#define BCM281XX_MASTER_CCU_SDIO4		3
+#define BCM281XX_MASTER_CCU_USB_IC		4
+#define BCM281XX_MASTER_CCU_HSIC2_48M		5
+#define BCM281XX_MASTER_CCU_HSIC2_12M		6
+#define BCM281XX_MASTER_CCU_CLOCK_COUNT		7
+
+/* slave CCU clock ids */
+
+#define BCM281XX_SLAVE_CCU_UARTB		0
+#define BCM281XX_SLAVE_CCU_UARTB2		1
+#define BCM281XX_SLAVE_CCU_UARTB3		2
+#define BCM281XX_SLAVE_CCU_UARTB4		3
+#define BCM281XX_SLAVE_CCU_SSP0			4
+#define BCM281XX_SLAVE_CCU_SSP2			5
+#define BCM281XX_SLAVE_CCU_BSC1			6
+#define BCM281XX_SLAVE_CCU_BSC2			7
+#define BCM281XX_SLAVE_CCU_BSC3			8
+#define BCM281XX_SLAVE_CCU_PWM			9
+#define BCM281XX_SLAVE_CCU_CLOCK_COUNT		10
+
+#endif /* _CLOCK_BCM281XX_H */
diff --git a/include/dt-bindings/clock/berlin2.h b/include/dt-bindings/clock/berlin2.h
new file mode 100644
index 000000000000..0c30800175df
--- /dev/null
+++ b/include/dt-bindings/clock/berlin2.h
@@ -0,0 +1,45 @@
+/*
+ * Berlin2 BG2/BG2CD clock tree IDs
+ */
+
+#define CLKID_SYS		0
+#define CLKID_CPU		1
+#define CLKID_DRMFIGO		2
+#define CLKID_CFG		3
+#define CLKID_GFX		4
+#define CLKID_ZSP		5
+#define CLKID_PERIF		6
+#define CLKID_PCUBE		7
+#define CLKID_VSCOPE		8
+#define CLKID_NFC_ECC		9
+#define CLKID_VPP		10
+#define CLKID_APP		11
+#define CLKID_AUDIO0		12
+#define CLKID_AUDIO2		13
+#define CLKID_AUDIO3		14
+#define CLKID_AUDIO1		15
+#define CLKID_GFX3D_CORE	16
+#define CLKID_GFX3D_SYS		17
+#define CLKID_ARC		18
+#define CLKID_VIP		19
+#define CLKID_SDIO0XIN		20
+#define CLKID_SDIO1XIN		21
+#define CLKID_GFX3D_EXTRA	22
+#define CLKID_GC360		23
+#define CLKID_SDIO_DLLMST	24
+#define CLKID_GETH0		25
+#define CLKID_GETH1		26
+#define CLKID_SATA		27
+#define CLKID_AHBAPB		28
+#define CLKID_USB0		29
+#define CLKID_USB1		30
+#define CLKID_PBRIDGE		31
+#define CLKID_SDIO0		32
+#define CLKID_SDIO1		33
+#define CLKID_NFC		34
+#define CLKID_SMEMC		35
+#define CLKID_AUDIOHD		36
+#define CLKID_VIDEO0		37
+#define CLKID_VIDEO1		38
+#define CLKID_VIDEO2		39
+#define CLKID_TWD		40
diff --git a/include/dt-bindings/clock/berlin2q.h b/include/dt-bindings/clock/berlin2q.h
new file mode 100644
index 000000000000..287fc3b4afb2
--- /dev/null
+++ b/include/dt-bindings/clock/berlin2q.h
@@ -0,0 +1,31 @@
+/*
+ * Berlin2 BG2Q clock tree IDs
+ */
+
+#define CLKID_SYS		0
+#define CLKID_DRMFIGO		1
+#define CLKID_CFG		2
+#define CLKID_GFX2D		3
+#define CLKID_ZSP		4
+#define CLKID_PERIF		5
+#define CLKID_PCUBE		6
+#define CLKID_VSCOPE		7
+#define CLKID_NFC_ECC		8
+#define CLKID_VPP		9
+#define CLKID_APP		10
+#define CLKID_SDIO0XIN		11
+#define CLKID_SDIO1XIN		12
+#define CLKID_GFX2DAXI		13
+#define CLKID_GETH0		14
+#define CLKID_SATA		15
+#define CLKID_AHBAPB		16
+#define CLKID_USB0		17
+#define CLKID_USB1		18
+#define CLKID_USB2		19
+#define CLKID_USB3		20
+#define CLKID_PBRIDGE		21
+#define CLKID_SDIO		22
+#define CLKID_NFC		23
+#define CLKID_SMEMC		24
+#define CLKID_PCIE		25
+#define CLKID_TWD		26
diff --git a/include/dt-bindings/clock/clps711x-clock.h b/include/dt-bindings/clock/clps711x-clock.h
new file mode 100644
index 000000000000..0c4c80b63242
--- /dev/null
+++ b/include/dt-bindings/clock/clps711x-clock.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_CLPS711X_H
+#define __DT_BINDINGS_CLOCK_CLPS711X_H
+
+#define CLPS711X_CLK_DUMMY	0
+#define CLPS711X_CLK_CPU	1
+#define CLPS711X_CLK_BUS	2
+#define CLPS711X_CLK_PLL	3
+#define CLPS711X_CLK_TIMERREF	4
+#define CLPS711X_CLK_TIMER1	5
+#define CLPS711X_CLK_TIMER2	6
+#define CLPS711X_CLK_PWM	7
+#define CLPS711X_CLK_SPIREF	8
+#define CLPS711X_CLK_SPI	9
+#define CLPS711X_CLK_UART	10
+#define CLPS711X_CLK_TICK	11
+#define CLPS711X_CLK_MAX	12
+
+#endif
diff --git a/include/dt-bindings/clock/exynos-audss-clk.h b/include/dt-bindings/clock/exynos-audss-clk.h
new file mode 100644
index 000000000000..0ae6f5a75d2a
--- /dev/null
+++ b/include/dt-bindings/clock/exynos-audss-clk.h
@@ -0,0 +1,26 @@
+/*
+ * This header provides constants for Samsung audio subsystem
+ * clock controller.
+ *
+ * The constants defined in this header are being used in dts
+ * and exynos audss driver.
+ */
+
+#ifndef _DT_BINDINGS_CLK_EXYNOS_AUDSS_H
+#define _DT_BINDINGS_CLK_EXYNOS_AUDSS_H
+
+#define EXYNOS_MOUT_AUDSS	0
+#define EXYNOS_MOUT_I2S	1
+#define EXYNOS_DOUT_SRP	2
+#define EXYNOS_DOUT_AUD_BUS	3
+#define EXYNOS_DOUT_I2S	4
+#define EXYNOS_SRP_CLK		5
+#define EXYNOS_I2S_BUS		6
+#define EXYNOS_SCLK_I2S	7
+#define EXYNOS_PCM_BUS		8
+#define EXYNOS_SCLK_PCM	9
+#define EXYNOS_ADMA		10
+
+#define EXYNOS_AUDSS_MAX_CLKS	11
+
+#endif
diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
new file mode 100644
index 000000000000..b535e9da7de6
--- /dev/null
+++ b/include/dt-bindings/clock/exynos3250.h
@@ -0,0 +1,258 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * 	Author: Tomasz Figa <t.figa@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Samsung Exynos3250 clock controllers.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+
+/*
+ * Main CMU
+ */
+
+#define CLK_OSCSEL			1
+#define CLK_FIN_PLL			2
+#define CLK_FOUT_APLL			3
+#define CLK_FOUT_VPLL			4
+#define CLK_FOUT_UPLL			5
+#define CLK_FOUT_MPLL			6
+
+/* Muxes */
+#define CLK_MOUT_MPLL_USER_L		16
+#define CLK_MOUT_GDL			17
+#define CLK_MOUT_MPLL_USER_R		18
+#define CLK_MOUT_GDR			19
+#define CLK_MOUT_EBI			20
+#define CLK_MOUT_ACLK_200		21
+#define CLK_MOUT_ACLK_160		22
+#define CLK_MOUT_ACLK_100		23
+#define CLK_MOUT_ACLK_266_1		24
+#define CLK_MOUT_ACLK_266_0		25
+#define CLK_MOUT_ACLK_266		26
+#define CLK_MOUT_VPLL			27
+#define CLK_MOUT_EPLL_USER		28
+#define CLK_MOUT_EBI_1			29
+#define CLK_MOUT_UPLL			30
+#define CLK_MOUT_ACLK_400_MCUISP_SUB	31
+#define CLK_MOUT_MPLL			32
+#define CLK_MOUT_ACLK_400_MCUISP	33
+#define CLK_MOUT_VPLLSRC		34
+#define CLK_MOUT_CAM1			35
+#define CLK_MOUT_CAM_BLK		36
+#define CLK_MOUT_MFC			37
+#define CLK_MOUT_MFC_1			38
+#define CLK_MOUT_MFC_0			39
+#define CLK_MOUT_G3D			40
+#define CLK_MOUT_G3D_1			41
+#define CLK_MOUT_G3D_0			42
+#define CLK_MOUT_MIPI0			43
+#define CLK_MOUT_FIMD0			44
+#define CLK_MOUT_UART_ISP		45
+#define CLK_MOUT_SPI1_ISP		46
+#define CLK_MOUT_SPI0_ISP		47
+#define CLK_MOUT_TSADC			48
+#define CLK_MOUT_MMC1			49
+#define CLK_MOUT_MMC0			50
+#define CLK_MOUT_UART1			51
+#define CLK_MOUT_UART0			52
+#define CLK_MOUT_SPI1			53
+#define CLK_MOUT_SPI0			54
+#define CLK_MOUT_AUDIO			55
+#define CLK_MOUT_MPLL_USER_C		56
+#define CLK_MOUT_HPM			57
+#define CLK_MOUT_CORE			58
+#define CLK_MOUT_APLL			59
+#define CLK_MOUT_ACLK_266_SUB		60
+
+/* Dividers */
+#define CLK_DIV_GPL			64
+#define CLK_DIV_GDL			65
+#define CLK_DIV_GPR			66
+#define CLK_DIV_GDR			67
+#define CLK_DIV_MPLL_PRE		68
+#define CLK_DIV_ACLK_400_MCUISP		69
+#define CLK_DIV_EBI			70
+#define CLK_DIV_ACLK_200		71
+#define CLK_DIV_ACLK_160		72
+#define CLK_DIV_ACLK_100		73
+#define CLK_DIV_ACLK_266		74
+#define CLK_DIV_CAM1			75
+#define CLK_DIV_CAM_BLK			76
+#define CLK_DIV_MFC			77
+#define CLK_DIV_G3D			78
+#define CLK_DIV_MIPI0_PRE		79
+#define CLK_DIV_MIPI0			80
+#define CLK_DIV_FIMD0			81
+#define CLK_DIV_UART_ISP		82
+#define CLK_DIV_SPI1_ISP_PRE		83
+#define CLK_DIV_SPI1_ISP		84
+#define CLK_DIV_SPI0_ISP_PRE		85
+#define CLK_DIV_SPI0_ISP		86
+#define CLK_DIV_TSADC_PRE		87
+#define CLK_DIV_TSADC			88
+#define CLK_DIV_MMC1_PRE		89
+#define CLK_DIV_MMC1			90
+#define CLK_DIV_MMC0_PRE		91
+#define CLK_DIV_MMC0			92
+#define CLK_DIV_UART1			93
+#define CLK_DIV_UART0			94
+#define CLK_DIV_SPI1_PRE		95
+#define CLK_DIV_SPI1			96
+#define CLK_DIV_SPI0_PRE		97
+#define CLK_DIV_SPI0			98
+#define CLK_DIV_PCM			99
+#define CLK_DIV_AUDIO			100
+#define CLK_DIV_I2S			101
+#define CLK_DIV_CORE2			102
+#define CLK_DIV_APLL			103
+#define CLK_DIV_PCLK_DBG		104
+#define CLK_DIV_ATB			105
+#define CLK_DIV_COREM			106
+#define CLK_DIV_CORE			107
+#define CLK_DIV_HPM			108
+#define CLK_DIV_COPY			109
+
+/* Gates */
+#define CLK_ASYNC_G3D			128
+#define CLK_ASYNC_MFCL			129
+#define CLK_PPMULEFT			130
+#define CLK_GPIO_LEFT			131
+#define CLK_ASYNC_ISPMX			132
+#define CLK_ASYNC_FSYSD			133
+#define CLK_ASYNC_LCD0X			134
+#define CLK_ASYNC_CAMX			135
+#define CLK_PPMURIGHT			136
+#define CLK_GPIO_RIGHT			137
+#define CLK_MONOCNT			138
+#define CLK_TZPC6			139
+#define CLK_PROVISIONKEY1		140
+#define CLK_PROVISIONKEY0		141
+#define CLK_CMU_ISPPART			142
+#define CLK_TMU_APBIF			143
+#define CLK_KEYIF			144
+#define CLK_RTC				145
+#define CLK_WDT				146
+#define CLK_MCT				147
+#define CLK_SECKEY			148
+#define CLK_TZPC5			149
+#define CLK_TZPC4			150
+#define CLK_TZPC3			151
+#define CLK_TZPC2			152
+#define CLK_TZPC1			153
+#define CLK_TZPC0			154
+#define CLK_CMU_COREPART		155
+#define CLK_CMU_TOPPART			156
+#define CLK_PMU_APBIF			157
+#define CLK_SYSREG			158
+#define CLK_CHIP_ID			159
+#define CLK_QEJPEG			160
+#define CLK_PIXELASYNCM1		161
+#define CLK_PIXELASYNCM0		162
+#define CLK_PPMUCAMIF			163
+#define CLK_QEM2MSCALER			164
+#define CLK_QEGSCALER1			165
+#define CLK_QEGSCALER0			166
+#define CLK_SMMUJPEG			167
+#define CLK_SMMUM2M2SCALER		168
+#define CLK_SMMUGSCALER1		169
+#define CLK_SMMUGSCALER0		170
+#define CLK_JPEG			171
+#define CLK_M2MSCALER			172
+#define CLK_GSCALER1			173
+#define CLK_GSCALER0			174
+#define CLK_QEMFC			175
+#define CLK_PPMUMFC_L			176
+#define CLK_SMMUMFC_L			177
+#define CLK_MFC				178
+#define CLK_SMMUG3D			179
+#define CLK_QEG3D			180
+#define CLK_PPMUG3D			181
+#define CLK_G3D				182
+#define CLK_QE_CH1_LCD			183
+#define CLK_QE_CH0_LCD			184
+#define CLK_PPMULCD0			185
+#define CLK_SMMUFIMD0			186
+#define CLK_DSIM0			187
+#define CLK_FIMD0			188
+#define CLK_CAM1			189
+#define CLK_UART_ISP_TOP		190
+#define CLK_SPI1_ISP_TOP		191
+#define CLK_SPI0_ISP_TOP		192
+#define CLK_TSADC			193
+#define CLK_PPMUFILE			194
+#define CLK_USBOTG			195
+#define CLK_USBHOST			196
+#define CLK_SROMC			197
+#define CLK_SDMMC1			198
+#define CLK_SDMMC0			199
+#define CLK_PDMA1			200
+#define CLK_PDMA0			201
+#define CLK_PWM				202
+#define CLK_PCM				203
+#define CLK_I2S				204
+#define CLK_SPI1			205
+#define CLK_SPI0			206
+#define CLK_I2C7			207
+#define CLK_I2C6			208
+#define CLK_I2C5			209
+#define CLK_I2C4			210
+#define CLK_I2C3			211
+#define CLK_I2C2			212
+#define CLK_I2C1			213
+#define CLK_I2C0			214
+#define CLK_UART1			215
+#define CLK_UART0			216
+#define CLK_BLOCK_LCD			217
+#define CLK_BLOCK_G3D			218
+#define CLK_BLOCK_MFC			219
+#define CLK_BLOCK_CAM			220
+#define CLK_SMIES			221
+
+/* Special clocks */
+#define CLK_SCLK_JPEG			224
+#define CLK_SCLK_M2MSCALER		225
+#define CLK_SCLK_GSCALER1		226
+#define CLK_SCLK_GSCALER0		227
+#define CLK_SCLK_MFC			228
+#define CLK_SCLK_G3D			229
+#define CLK_SCLK_MIPIDPHY2L		230
+#define CLK_SCLK_MIPI0			231
+#define CLK_SCLK_FIMD0			232
+#define CLK_SCLK_CAM1			233
+#define CLK_SCLK_UART_ISP		234
+#define CLK_SCLK_SPI1_ISP		235
+#define CLK_SCLK_SPI0_ISP		236
+#define CLK_SCLK_UPLL			237
+#define CLK_SCLK_TSADC			238
+#define CLK_SCLK_EBI			239
+#define CLK_SCLK_MMC1			240
+#define CLK_SCLK_MMC0			241
+#define CLK_SCLK_I2S			242
+#define CLK_SCLK_PCM			243
+#define CLK_SCLK_SPI1			244
+#define CLK_SCLK_SPI0			245
+#define CLK_SCLK_UART1			246
+#define CLK_SCLK_UART0			247
+
+/*
+ * Total number of clocks of main CMU.
+ * NOTE: Must be equal to last clock ID increased by one.
+ */
+#define CLK_NR_CLKS			248
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */
diff --git a/include/dt-bindings/clock/exynos5260-clk.h b/include/dt-bindings/clock/exynos5260-clk.h
new file mode 100644
index 000000000000..a4bac9a1764f
--- /dev/null
+++ b/include/dt-bindings/clock/exynos5260-clk.h
@@ -0,0 +1,469 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Rahul Sharma <rahul.sharma@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Provides Constants for Exynos5260 clocks.
+*/
+
+#ifndef _DT_BINDINGS_CLK_EXYNOS5260_H
+#define _DT_BINDINGS_CLK_EXYNOS5260_H
+
+/* Clock names: <cmu><type><IP> */
+
+/* List Of Clocks For CMU_TOP */
+
+#define TOP_FOUT_DISP_PLL				1
+#define TOP_FOUT_AUD_PLL				2
+#define TOP_MOUT_AUDTOP_PLL_USER			3
+#define TOP_MOUT_AUD_PLL				4
+#define TOP_MOUT_DISP_PLL				5
+#define TOP_MOUT_BUSTOP_PLL_USER			6
+#define TOP_MOUT_MEMTOP_PLL_USER			7
+#define TOP_MOUT_MEDIATOP_PLL_USER			8
+#define TOP_MOUT_DISP_DISP_333				9
+#define TOP_MOUT_ACLK_DISP_333				10
+#define TOP_MOUT_DISP_DISP_222				11
+#define TOP_MOUT_ACLK_DISP_222				12
+#define TOP_MOUT_DISP_MEDIA_PIXEL			13
+#define TOP_MOUT_FIMD1					14
+#define TOP_MOUT_SCLK_PERI_SPI0_CLK			15
+#define TOP_MOUT_SCLK_PERI_SPI1_CLK			16
+#define TOP_MOUT_SCLK_PERI_SPI2_CLK			17
+#define TOP_MOUT_SCLK_PERI_UART0_UCLK			18
+#define TOP_MOUT_SCLK_PERI_UART2_UCLK			19
+#define TOP_MOUT_SCLK_PERI_UART1_UCLK			20
+#define TOP_MOUT_BUS4_BUSTOP_100			21
+#define TOP_MOUT_BUS4_BUSTOP_400			22
+#define TOP_MOUT_BUS3_BUSTOP_100			23
+#define TOP_MOUT_BUS3_BUSTOP_400			24
+#define TOP_MOUT_BUS2_BUSTOP_400			25
+#define TOP_MOUT_BUS2_BUSTOP_100			26
+#define TOP_MOUT_BUS1_BUSTOP_100			27
+#define TOP_MOUT_BUS1_BUSTOP_400			28
+#define TOP_MOUT_SCLK_FSYS_USB				29
+#define TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A		30
+#define TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A		31
+#define TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A		32
+#define TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B		33
+#define TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B		34
+#define TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B		35
+#define TOP_MOUT_ACLK_ISP1_266				36
+#define TOP_MOUT_ISP1_MEDIA_266				37
+#define TOP_MOUT_ACLK_ISP1_400				38
+#define TOP_MOUT_ISP1_MEDIA_400				39
+#define TOP_MOUT_SCLK_ISP1_SPI0				40
+#define TOP_MOUT_SCLK_ISP1_SPI1				41
+#define TOP_MOUT_SCLK_ISP1_UART				42
+#define TOP_MOUT_SCLK_ISP1_SENSOR2			43
+#define TOP_MOUT_SCLK_ISP1_SENSOR1			44
+#define TOP_MOUT_SCLK_ISP1_SENSOR0			45
+#define TOP_MOUT_ACLK_MFC_333				46
+#define TOP_MOUT_MFC_BUSTOP_333				47
+#define TOP_MOUT_ACLK_G2D_333				48
+#define TOP_MOUT_G2D_BUSTOP_333				49
+#define TOP_MOUT_ACLK_GSCL_FIMC				50
+#define TOP_MOUT_GSCL_BUSTOP_FIMC			51
+#define TOP_MOUT_ACLK_GSCL_333				52
+#define TOP_MOUT_GSCL_BUSTOP_333			53
+#define TOP_MOUT_ACLK_GSCL_400				54
+#define TOP_MOUT_M2M_MEDIATOP_400			55
+#define TOP_DOUT_ACLK_MFC_333				56
+#define TOP_DOUT_ACLK_G2D_333				57
+#define TOP_DOUT_SCLK_ISP1_SENSOR2_A			58
+#define TOP_DOUT_SCLK_ISP1_SENSOR1_A			59
+#define TOP_DOUT_SCLK_ISP1_SENSOR0_A			60
+#define TOP_DOUT_ACLK_GSCL_FIMC				61
+#define TOP_DOUT_ACLK_GSCL_400				62
+#define TOP_DOUT_ACLK_GSCL_333				63
+#define TOP_DOUT_SCLK_ISP1_SPI0_B			64
+#define TOP_DOUT_SCLK_ISP1_SPI0_A			65
+#define TOP_DOUT_ACLK_ISP1_400				66
+#define TOP_DOUT_ACLK_ISP1_266				67
+#define TOP_DOUT_SCLK_ISP1_UART				68
+#define TOP_DOUT_SCLK_ISP1_SPI1_B			69
+#define TOP_DOUT_SCLK_ISP1_SPI1_A			70
+#define TOP_DOUT_SCLK_ISP1_SENSOR2_B			71
+#define TOP_DOUT_SCLK_ISP1_SENSOR1_B			72
+#define TOP_DOUT_SCLK_ISP1_SENSOR0_B			73
+#define TOP_DOUTTOP__SCLK_HPM_TARGETCLK			74
+#define TOP_DOUT_SCLK_DISP_PIXEL			75
+#define TOP_DOUT_ACLK_DISP_222				76
+#define TOP_DOUT_ACLK_DISP_333				77
+#define TOP_DOUT_ACLK_BUS4_100				78
+#define TOP_DOUT_ACLK_BUS4_400				79
+#define TOP_DOUT_ACLK_BUS3_100				80
+#define TOP_DOUT_ACLK_BUS3_400				81
+#define TOP_DOUT_ACLK_BUS2_100				82
+#define TOP_DOUT_ACLK_BUS2_400				83
+#define TOP_DOUT_ACLK_BUS1_100				84
+#define TOP_DOUT_ACLK_BUS1_400				85
+#define TOP_DOUT_SCLK_PERI_SPI1_B			86
+#define TOP_DOUT_SCLK_PERI_SPI1_A			87
+#define TOP_DOUT_SCLK_PERI_SPI0_B			88
+#define TOP_DOUT_SCLK_PERI_SPI0_A			89
+#define TOP_DOUT_SCLK_PERI_UART0			90
+#define TOP_DOUT_SCLK_PERI_UART2			91
+#define TOP_DOUT_SCLK_PERI_UART1			92
+#define TOP_DOUT_SCLK_PERI_SPI2_B			93
+#define TOP_DOUT_SCLK_PERI_SPI2_A			94
+#define TOP_DOUT_ACLK_PERI_AUD				95
+#define TOP_DOUT_ACLK_PERI_66				96
+#define TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_B		97
+#define TOP_DOUT_SCLK_FSYS_MMC0_SDCLKIN_A		98
+#define TOP_DOUT_SCLK_FSYS_USBDRD30_SUSPEND_CLK		99
+#define TOP_DOUT_ACLK_FSYS_200				100
+#define TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_B		101
+#define TOP_DOUT_SCLK_FSYS_MMC2_SDCLKIN_A		102
+#define TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_B		103
+#define TOP_DOUT_SCLK_FSYS_MMC1_SDCLKIN_A		104
+#define TOP_SCLK_FIMD1					105
+#define TOP_SCLK_MMC2					106
+#define TOP_SCLK_MMC1					107
+#define TOP_SCLK_MMC0					108
+#define PHYCLK_DPTX_PHY_CH3_TXD_CLK			109
+#define PHYCLK_DPTX_PHY_CH2_TXD_CLK			110
+#define PHYCLK_DPTX_PHY_CH1_TXD_CLK			111
+#define PHYCLK_DPTX_PHY_CH0_TXD_CLK			112
+#define phyclk_hdmi_phy_tmds_clko			113
+#define PHYCLK_HDMI_PHY_PIXEL_CLKO			114
+#define PHYCLK_HDMI_LINK_O_TMDS_CLKHI			115
+#define PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS		116
+#define PHYCLK_DPTX_PHY_O_REF_CLK_24M			117
+#define PHYCLK_DPTX_PHY_CLK_DIV2			118
+#define PHYCLK_MIPI_DPHY_4L_M_RXCLKESC0			119
+#define PHYCLK_USBHOST20_PHY_PHYCLOCK			120
+#define PHYCLK_USBHOST20_PHY_FREECLK			121
+#define PHYCLK_USBHOST20_PHY_CLK48MOHCI			122
+#define PHYCLK_USBDRD30_UDRD30_PIPE_PCLK		123
+#define PHYCLK_USBDRD30_UDRD30_PHYCLOCK			124
+#define TOP_NR_CLK					125
+
+
+/* List Of Clocks For CMU_EGL */
+
+#define EGL_FOUT_EGL_PLL				1
+#define EGL_FOUT_EGL_DPLL				2
+#define EGL_MOUT_EGL_B					3
+#define EGL_MOUT_EGL_PLL				4
+#define EGL_DOUT_EGL_PLL				5
+#define EGL_DOUT_EGL_PCLK_DBG				6
+#define EGL_DOUT_EGL_ATCLK				7
+#define EGL_DOUT_PCLK_EGL				8
+#define EGL_DOUT_ACLK_EGL				9
+#define EGL_DOUT_EGL2					10
+#define EGL_DOUT_EGL1					11
+#define EGL_NR_CLK					12
+
+
+/* List Of Clocks For CMU_KFC */
+
+#define KFC_FOUT_KFC_PLL				1
+#define KFC_MOUT_KFC_PLL				2
+#define KFC_MOUT_KFC					3
+#define KFC_DOUT_KFC_PLL				4
+#define KFC_DOUT_PCLK_KFC				5
+#define KFC_DOUT_ACLK_KFC				6
+#define KFC_DOUT_KFC_PCLK_DBG				7
+#define KFC_DOUT_KFC_ATCLK				8
+#define KFC_DOUT_KFC2					9
+#define KFC_DOUT_KFC1					10
+#define KFC_NR_CLK					11
+
+
+/* List Of Clocks For CMU_MIF */
+
+#define MIF_FOUT_MEM_PLL				1
+#define MIF_FOUT_MEDIA_PLL				2
+#define MIF_FOUT_BUS_PLL				3
+#define MIF_MOUT_CLK2X_PHY				4
+#define MIF_MOUT_MIF_DREX2X				5
+#define MIF_MOUT_CLKM_PHY				6
+#define MIF_MOUT_MIF_DREX				7
+#define MIF_MOUT_MEDIA_PLL				8
+#define MIF_MOUT_BUS_PLL				9
+#define MIF_MOUT_MEM_PLL				10
+#define MIF_DOUT_ACLK_BUS_100				11
+#define MIF_DOUT_ACLK_BUS_200				12
+#define MIF_DOUT_ACLK_MIF_466				13
+#define MIF_DOUT_CLK2X_PHY				14
+#define MIF_DOUT_CLKM_PHY				15
+#define MIF_DOUT_BUS_PLL				16
+#define MIF_DOUT_MEM_PLL				17
+#define MIF_DOUT_MEDIA_PLL				18
+#define MIF_CLK_LPDDR3PHY_WRAP1				19
+#define MIF_CLK_LPDDR3PHY_WRAP0				20
+#define MIF_CLK_MONOCNT					21
+#define MIF_CLK_MIF_RTC					22
+#define MIF_CLK_DREX1					23
+#define MIF_CLK_DREX0					24
+#define MIF_CLK_INTMEM					25
+#define MIF_SCLK_LPDDR3PHY_WRAP_U1			26
+#define MIF_SCLK_LPDDR3PHY_WRAP_U0			27
+#define MIF_NR_CLK					28
+
+
+/* List Of Clocks For CMU_G3D */
+
+#define G3D_FOUT_G3D_PLL				1
+#define G3D_MOUT_G3D_PLL				2
+#define G3D_DOUT_PCLK_G3D				3
+#define G3D_DOUT_ACLK_G3D				4
+#define G3D_CLK_G3D_HPM					5
+#define G3D_CLK_G3D					6
+#define G3D_NR_CLK					7
+
+
+/* List Of Clocks For CMU_AUD */
+
+#define AUD_MOUT_SCLK_AUD_PCM				1
+#define AUD_MOUT_SCLK_AUD_I2S				2
+#define AUD_MOUT_AUD_PLL_USER				3
+#define AUD_DOUT_ACLK_AUD_131				4
+#define AUD_DOUT_SCLK_AUD_UART				5
+#define AUD_DOUT_SCLK_AUD_PCM				6
+#define AUD_DOUT_SCLK_AUD_I2S				7
+#define AUD_CLK_AUD_UART				8
+#define AUD_CLK_PCM					9
+#define AUD_CLK_I2S					10
+#define AUD_CLK_DMAC					11
+#define AUD_CLK_SRAMC					12
+#define AUD_SCLK_AUD_UART				13
+#define AUD_SCLK_PCM					14
+#define AUD_SCLK_I2S					15
+#define AUD_NR_CLK					16
+
+
+/* List Of Clocks For CMU_MFC */
+
+#define MFC_MOUT_ACLK_MFC_333_USER			1
+#define MFC_DOUT_PCLK_MFC_83				2
+#define MFC_CLK_MFC					3
+#define MFC_CLK_SMMU2_MFCM1				4
+#define MFC_CLK_SMMU2_MFCM0				5
+#define MFC_NR_CLK					6
+
+
+/* List Of Clocks For CMU_GSCL */
+
+#define GSCL_MOUT_ACLK_CSIS				1
+#define GSCL_MOUT_ACLK_GSCL_FIMC_USER			2
+#define GSCL_MOUT_ACLK_M2M_400_USER			3
+#define GSCL_MOUT_ACLK_GSCL_333_USER			4
+#define GSCL_DOUT_ACLK_CSIS_200				5
+#define GSCL_DOUT_PCLK_M2M_100				6
+#define GSCL_CLK_PIXEL_GSCL1				7
+#define GSCL_CLK_PIXEL_GSCL0				8
+#define GSCL_CLK_MSCL1					9
+#define GSCL_CLK_MSCL0					10
+#define GSCL_CLK_GSCL1					11
+#define GSCL_CLK_GSCL0					12
+#define GSCL_CLK_FIMC_LITE_D				13
+#define GSCL_CLK_FIMC_LITE_B				14
+#define GSCL_CLK_FIMC_LITE_A				15
+#define GSCL_CLK_CSIS1					16
+#define GSCL_CLK_CSIS0					17
+#define GSCL_CLK_SMMU3_LITE_D				18
+#define GSCL_CLK_SMMU3_LITE_B				19
+#define GSCL_CLK_SMMU3_LITE_A				20
+#define GSCL_CLK_SMMU3_GSCL0				21
+#define GSCL_CLK_SMMU3_GSCL1				22
+#define GSCL_CLK_SMMU3_MSCL0				23
+#define GSCL_CLK_SMMU3_MSCL1				24
+#define GSCL_SCLK_CSIS1_WRAP				25
+#define GSCL_SCLK_CSIS0_WRAP				26
+#define GSCL_NR_CLK					27
+
+
+/* List Of Clocks For CMU_FSYS */
+
+#define FSYS_MOUT_PHYCLK_USBHOST20_PHYCLK_USER		1
+#define FSYS_MOUT_PHYCLK_USBHOST20_FREECLK_USER		2
+#define FSYS_MOUT_PHYCLK_USBHOST20_CLK48MOHCI_USER	3
+#define FSYS_MOUT_PHYCLK_USBDRD30_PIPE_PCLK_USER	4
+#define FSYS_MOUT_PHYCLK_USBDRD30_PHYCLOCK_USER		5
+#define FSYS_CLK_TSI					6
+#define FSYS_CLK_USBLINK				7
+#define FSYS_CLK_USBHOST20				8
+#define FSYS_CLK_USBDRD30				9
+#define FSYS_CLK_SROMC					10
+#define FSYS_CLK_PDMA					11
+#define FSYS_CLK_MMC2					12
+#define FSYS_CLK_MMC1					13
+#define FSYS_CLK_MMC0					14
+#define FSYS_CLK_RTIC					15
+#define FSYS_CLK_SMMU_RTIC				16
+#define FSYS_PHYCLK_USBDRD30				17
+#define FSYS_PHYCLK_USBHOST20				18
+#define FSYS_NR_CLK					19
+
+
+/* List Of Clocks For CMU_PERI */
+
+#define PERI_MOUT_SCLK_SPDIF				1
+#define PERI_MOUT_SCLK_I2SCOD				2
+#define PERI_MOUT_SCLK_PCM				3
+#define PERI_DOUT_I2S					4
+#define PERI_DOUT_PCM					5
+#define PERI_CLK_WDT_KFC				6
+#define PERI_CLK_WDT_EGL				7
+#define PERI_CLK_HSIC3					8
+#define PERI_CLK_HSIC2					9
+#define PERI_CLK_HSIC1					10
+#define PERI_CLK_HSIC0					11
+#define PERI_CLK_PCM					12
+#define PERI_CLK_MCT					13
+#define PERI_CLK_I2S					14
+#define PERI_CLK_I2CHDMI				15
+#define PERI_CLK_I2C7					16
+#define PERI_CLK_I2C6					17
+#define PERI_CLK_I2C5					18
+#define PERI_CLK_I2C4					19
+#define PERI_CLK_I2C9					20
+#define PERI_CLK_I2C8					21
+#define PERI_CLK_I2C11					22
+#define PERI_CLK_I2C10					23
+#define PERI_CLK_HDMICEC				24
+#define PERI_CLK_EFUSE_WRITER				25
+#define PERI_CLK_ABB					26
+#define PERI_CLK_UART2					27
+#define PERI_CLK_UART1					28
+#define PERI_CLK_UART0					29
+#define PERI_CLK_ADC					30
+#define PERI_CLK_TMU4					31
+#define PERI_CLK_TMU3					32
+#define PERI_CLK_TMU2					33
+#define PERI_CLK_TMU1					34
+#define PERI_CLK_TMU0					35
+#define PERI_CLK_SPI2					36
+#define PERI_CLK_SPI1					37
+#define PERI_CLK_SPI0					38
+#define PERI_CLK_SPDIF					39
+#define PERI_CLK_PWM					40
+#define PERI_CLK_UART4					41
+#define PERI_CLK_CHIPID					42
+#define PERI_CLK_PROVKEY0				43
+#define PERI_CLK_PROVKEY1				44
+#define PERI_CLK_SECKEY					45
+#define PERI_CLK_TOP_RTC				46
+#define PERI_CLK_TZPC10					47
+#define PERI_CLK_TZPC9					48
+#define PERI_CLK_TZPC8					49
+#define PERI_CLK_TZPC7					50
+#define PERI_CLK_TZPC6					51
+#define PERI_CLK_TZPC5					52
+#define PERI_CLK_TZPC4					53
+#define PERI_CLK_TZPC3					54
+#define PERI_CLK_TZPC2					55
+#define PERI_CLK_TZPC1					56
+#define PERI_CLK_TZPC0					57
+#define PERI_SCLK_UART2					58
+#define PERI_SCLK_UART1					59
+#define PERI_SCLK_UART0					60
+#define PERI_SCLK_SPI2					61
+#define PERI_SCLK_SPI1					62
+#define PERI_SCLK_SPI0					63
+#define PERI_SCLK_SPDIF					64
+#define PERI_SCLK_I2S					65
+#define PERI_SCLK_PCM1					66
+#define PERI_NR_CLK					67
+
+
+/* List Of Clocks For CMU_DISP */
+
+#define DISP_MOUT_SCLK_HDMI_SPDIF			1
+#define DISP_MOUT_SCLK_HDMI_PIXEL			2
+#define DISP_MOUT_PHYCLK_MIPI_DPHY_4LMRXCLK_ESC0_USER	3
+#define DISP_MOUT_PHYCLK_HDMI_PHY_TMDS_CLKO_USER	4
+#define DISP_MOUT_PHYCLK_HDMI_PHY_REF_CLKO_USER		5
+#define DISP_MOUT_HDMI_PHY_PIXEL			6
+#define DISP_MOUT_PHYCLK_HDMI_LINK_O_TMDS_CLKHI_USER	7
+#define DISP_MOUT_PHYCLK_MIPI_DPHY_4L_M_TXBYTE_CLKHS	8
+#define DISP_MOUT_PHYCLK_DPTX_PHY_O_REF_CLK_24M_USER	9
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CLK_DIV2_USER		10
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH3_TXD_CLK_USER	11
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH2_TXD_CLK_USER	12
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH1_TXD_CLK_USER	13
+#define DISP_MOUT_PHYCLK_DPTX_PHY_CH0_TXD_CLK_USER	14
+#define DISP_MOUT_ACLK_DISP_222_USER			15
+#define DISP_MOUT_SCLK_DISP_PIXEL_USER			16
+#define DISP_MOUT_ACLK_DISP_333_USER			17
+#define DISP_DOUT_SCLK_HDMI_PHY_PIXEL_CLKI		18
+#define DISP_DOUT_SCLK_FIMD1_EXTCLKPLL			19
+#define DISP_DOUT_PCLK_DISP_111				20
+#define DISP_CLK_SMMU_TV				21
+#define DISP_CLK_SMMU_FIMD1M1				22
+#define DISP_CLK_SMMU_FIMD1M0				23
+#define DISP_CLK_PIXEL_MIXER				24
+#define DISP_CLK_PIXEL_DISP				25
+#define DISP_CLK_MIXER					26
+#define DISP_CLK_MIPIPHY				27
+#define DISP_CLK_HDMIPHY				28
+#define DISP_CLK_HDMI					29
+#define DISP_CLK_FIMD1					30
+#define DISP_CLK_DSIM1					31
+#define DISP_CLK_DPPHY					32
+#define DISP_CLK_DP					33
+#define DISP_SCLK_PIXEL					34
+#define DISP_MOUT_HDMI_PHY_PIXEL_USER			35
+#define DISP_NR_CLK					36
+
+
+/* List Of Clocks For CMU_G2D */
+
+#define G2D_MOUT_ACLK_G2D_333_USER			1
+#define G2D_DOUT_PCLK_G2D_83				2
+#define G2D_CLK_SMMU3_JPEG				3
+#define G2D_CLK_MDMA					4
+#define G2D_CLK_JPEG					5
+#define G2D_CLK_G2D					6
+#define G2D_CLK_SSS					7
+#define G2D_CLK_SLIM_SSS				8
+#define G2D_CLK_SMMU_SLIM_SSS				9
+#define G2D_CLK_SMMU_SSS				10
+#define G2D_CLK_SMMU_MDMA				11
+#define G2D_CLK_SMMU3_G2D				12
+#define G2D_NR_CLK					13
+
+
+/* List Of Clocks For CMU_ISP */
+
+#define ISP_MOUT_ISP_400_USER				1
+#define ISP_MOUT_ISP_266_USER				2
+#define ISP_DOUT_SCLK_MPWM				3
+#define ISP_DOUT_CA5_PCLKDBG				4
+#define ISP_DOUT_CA5_ATCLKIN				5
+#define ISP_DOUT_PCLK_ISP_133				6
+#define ISP_DOUT_PCLK_ISP_66				7
+#define ISP_CLK_GIC					8
+#define ISP_CLK_WDT					9
+#define ISP_CLK_UART					10
+#define ISP_CLK_SPI1					11
+#define ISP_CLK_SPI0					12
+#define ISP_CLK_SMMU_SCALERP				13
+#define ISP_CLK_SMMU_SCALERC				14
+#define ISP_CLK_SMMU_ISPCX				15
+#define ISP_CLK_SMMU_ISP				16
+#define ISP_CLK_SMMU_FD					17
+#define ISP_CLK_SMMU_DRC				18
+#define ISP_CLK_PWM					19
+#define ISP_CLK_MTCADC					20
+#define ISP_CLK_MPWM					21
+#define ISP_CLK_MCUCTL					22
+#define ISP_CLK_I2C1					23
+#define ISP_CLK_I2C0					24
+#define ISP_CLK_FIMC_SCALERP				25
+#define ISP_CLK_FIMC_SCALERC				26
+#define ISP_CLK_FIMC					27
+#define ISP_CLK_FIMC_FD					28
+#define ISP_CLK_FIMC_DRC				29
+#define ISP_CLK_CA5					30
+#define ISP_SCLK_SPI0_EXT				31
+#define ISP_SCLK_SPI1_EXT				32
+#define ISP_SCLK_UART_EXT				33
+#define ISP_NR_CLK					34
+
+#endif
diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h
new file mode 100644
index 000000000000..9b180f032e2d
--- /dev/null
+++ b/include/dt-bindings/clock/exynos5410.h
@@ -0,0 +1,33 @@
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H
+#define _DT_BINDINGS_CLOCK_EXYNOS_5410_H
+
+/* core clocks */
+#define CLK_FIN_PLL 1
+#define CLK_FOUT_APLL 2
+#define CLK_FOUT_CPLL 3
+#define CLK_FOUT_MPLL 4
+#define CLK_FOUT_BPLL 5
+#define CLK_FOUT_KPLL 6
+
+/* gate for special clocks (sclk) */
+#define CLK_SCLK_UART0 128
+#define CLK_SCLK_UART1 129
+#define CLK_SCLK_UART2 130
+#define CLK_SCLK_UART3 131
+#define CLK_SCLK_MMC0 132
+#define CLK_SCLK_MMC1 133
+#define CLK_SCLK_MMC2 134
+
+/* gate clocks */
+#define CLK_UART0 257
+#define CLK_UART1 258
+#define CLK_UART2 259
+#define CLK_UART3 260
+#define CLK_MCT 315
+#define CLK_MMC0 351
+#define CLK_MMC1 352
+#define CLK_MMC2 353
+
+#define CLK_NR_CLKS 512
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */
diff --git a/include/dt-bindings/clock/hip04-clock.h b/include/dt-bindings/clock/hip04-clock.h
new file mode 100644
index 000000000000..695e61cd1523
--- /dev/null
+++ b/include/dt-bindings/clock/hip04-clock.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2013-2014 Hisilicon Limited.
+ * Copyright (c) 2013-2014 Linaro Limited.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __DTS_HIP04_CLOCK_H
+#define __DTS_HIP04_CLOCK_H
+
+#define HIP04_NONE_CLOCK	0
+
+/* fixed rate & fixed factor clocks */
+#define HIP04_OSC50M		1
+#define HIP04_CLK_50M		2
+#define HIP04_CLK_168M		3
+
+#define HIP04_NR_CLKS		64
+
+#endif	/* __DTS_HIP04_CLOCK_H */
diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h
new file mode 100644
index 000000000000..aad579a75802
--- /dev/null
+++ b/include/dt-bindings/clock/hix5hd2-clock.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef __DTS_HIX5HD2_CLOCK_H
+#define __DTS_HIX5HD2_CLOCK_H
+
+/* fixed rate */
+#define HIX5HD2_FIXED_1200M		1
+#define HIX5HD2_FIXED_400M		2
+#define HIX5HD2_FIXED_48M		3
+#define HIX5HD2_FIXED_24M		4
+#define HIX5HD2_FIXED_600M		5
+#define HIX5HD2_FIXED_300M		6
+#define HIX5HD2_FIXED_75M		7
+#define HIX5HD2_FIXED_200M		8
+#define HIX5HD2_FIXED_100M		9
+#define HIX5HD2_FIXED_40M		10
+#define HIX5HD2_FIXED_150M		11
+#define HIX5HD2_FIXED_1728M		12
+#define HIX5HD2_FIXED_28P8M		13
+#define HIX5HD2_FIXED_432M		14
+#define HIX5HD2_FIXED_345P6M		15
+#define HIX5HD2_FIXED_288M		16
+#define HIX5HD2_FIXED_60M		17
+#define HIX5HD2_FIXED_750M		18
+#define HIX5HD2_FIXED_500M		19
+#define HIX5HD2_FIXED_54M		20
+#define HIX5HD2_FIXED_27M		21
+#define HIX5HD2_FIXED_1500M		22
+#define HIX5HD2_FIXED_375M		23
+#define HIX5HD2_FIXED_187M		24
+#define HIX5HD2_FIXED_250M		25
+#define HIX5HD2_FIXED_125M		26
+#define HIX5HD2_FIXED_2P02M		27
+#define HIX5HD2_FIXED_50M		28
+#define HIX5HD2_FIXED_25M		29
+#define HIX5HD2_FIXED_83M		30
+
+/* mux clocks */
+#define HIX5HD2_SFC_MUX			64
+#define HIX5HD2_MMC_MUX			65
+#define HIX5HD2_FEPHY_MUX		66
+
+/* gate clocks */
+#define HIX5HD2_SFC_RST			128
+#define HIX5HD2_SFC_CLK			129
+#define HIX5HD2_MMC_CIU_CLK		130
+#define HIX5HD2_MMC_BIU_CLK		131
+#define HIX5HD2_MMC_CIU_RST		132
+
+#define HIX5HD2_NR_CLKS			256
+#endif	/* __DTS_HIX5HD2_CLOCK_H */
diff --git a/include/dt-bindings/clock/imx1-clock.h b/include/dt-bindings/clock/imx1-clock.h
new file mode 100644
index 000000000000..607bf01a31dd
--- /dev/null
+++ b/include/dt-bindings/clock/imx1-clock.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX1_H
+#define __DT_BINDINGS_CLOCK_IMX1_H
+
+#define IMX1_CLK_DUMMY		0
+#define IMX1_CLK_CLK32		1
+#define IMX1_CLK_CLK16M_EXT	2
+#define IMX1_CLK_CLK16M		3
+#define IMX1_CLK_CLK32_PREMULT	4
+#define IMX1_CLK_PREM		5
+#define IMX1_CLK_MPLL		6
+#define IMX1_CLK_MPLL_GATE	7
+#define IMX1_CLK_SPLL		8
+#define IMX1_CLK_SPLL_GATE	9
+#define IMX1_CLK_MCU		10
+#define IMX1_CLK_FCLK		11
+#define IMX1_CLK_HCLK		12
+#define IMX1_CLK_CLK48M		13
+#define IMX1_CLK_PER1		14
+#define IMX1_CLK_PER2		15
+#define IMX1_CLK_PER3		16
+#define IMX1_CLK_CLKO		17
+#define IMX1_CLK_UART3_GATE	18
+#define IMX1_CLK_SSI2_GATE	19
+#define IMX1_CLK_BROM_GATE	20
+#define IMX1_CLK_DMA_GATE	21
+#define IMX1_CLK_CSI_GATE	22
+#define IMX1_CLK_MMA_GATE	23
+#define IMX1_CLK_USBD_GATE	24
+#define IMX1_CLK_MAX		25
+
+#endif
diff --git a/include/dt-bindings/clock/imx21-clock.h b/include/dt-bindings/clock/imx21-clock.h
new file mode 100644
index 000000000000..b13596cf51b2
--- /dev/null
+++ b/include/dt-bindings/clock/imx21-clock.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX21_H
+#define __DT_BINDINGS_CLOCK_IMX21_H
+
+#define IMX21_CLK_DUMMY			0
+#define IMX21_CLK_CKIL			1
+#define IMX21_CLK_CKIH			2
+#define IMX21_CLK_FPM			3
+#define IMX21_CLK_CKIH_DIV1P5		4
+#define IMX21_CLK_MPLL_GATE		5
+#define IMX21_CLK_SPLL_GATE		6
+#define IMX21_CLK_FPM_GATE		7
+#define IMX21_CLK_CKIH_GATE		8
+#define IMX21_CLK_MPLL_OSC_SEL		9
+#define IMX21_CLK_IPG			10
+#define IMX21_CLK_HCLK			11
+#define IMX21_CLK_MPLL_SEL		12
+#define IMX21_CLK_SPLL_SEL		13
+#define IMX21_CLK_SSI1_SEL		14
+#define IMX21_CLK_SSI2_SEL		15
+#define IMX21_CLK_USB_DIV		16
+#define IMX21_CLK_FCLK			17
+#define IMX21_CLK_MPLL			18
+#define IMX21_CLK_SPLL			19
+#define IMX21_CLK_NFC_DIV		20
+#define IMX21_CLK_SSI1_DIV		21
+#define IMX21_CLK_SSI2_DIV		22
+#define IMX21_CLK_PER1			23
+#define IMX21_CLK_PER2			24
+#define IMX21_CLK_PER3			25
+#define IMX21_CLK_PER4			26
+#define IMX21_CLK_UART1_IPG_GATE	27
+#define IMX21_CLK_UART2_IPG_GATE	28
+#define IMX21_CLK_UART3_IPG_GATE	29
+#define IMX21_CLK_UART4_IPG_GATE	30
+#define IMX21_CLK_CSPI1_IPG_GATE	31
+#define IMX21_CLK_CSPI2_IPG_GATE	32
+#define IMX21_CLK_SSI1_GATE		33
+#define IMX21_CLK_SSI2_GATE		34
+#define IMX21_CLK_SDHC1_IPG_GATE	35
+#define IMX21_CLK_SDHC2_IPG_GATE	36
+#define IMX21_CLK_GPIO_GATE		37
+#define IMX21_CLK_I2C_GATE		38
+#define IMX21_CLK_DMA_GATE		39
+#define IMX21_CLK_USB_GATE		40
+#define IMX21_CLK_EMMA_GATE		41
+#define IMX21_CLK_SSI2_BAUD_GATE	42
+#define IMX21_CLK_SSI1_BAUD_GATE	43
+#define IMX21_CLK_LCDC_IPG_GATE		44
+#define IMX21_CLK_NFC_GATE		45
+#define IMX21_CLK_LCDC_HCLK_GATE	46
+#define IMX21_CLK_PER4_GATE		47
+#define IMX21_CLK_BMI_GATE		48
+#define IMX21_CLK_USB_HCLK_GATE		49
+#define IMX21_CLK_SLCDC_GATE		50
+#define IMX21_CLK_SLCDC_HCLK_GATE	51
+#define IMX21_CLK_EMMA_HCLK_GATE	52
+#define IMX21_CLK_BROM_GATE		53
+#define IMX21_CLK_DMA_HCLK_GATE		54
+#define IMX21_CLK_CSI_HCLK_GATE		55
+#define IMX21_CLK_CSPI3_IPG_GATE	56
+#define IMX21_CLK_WDOG_GATE		57
+#define IMX21_CLK_GPT1_IPG_GATE		58
+#define IMX21_CLK_GPT2_IPG_GATE		59
+#define IMX21_CLK_GPT3_IPG_GATE		60
+#define IMX21_CLK_PWM_IPG_GATE		61
+#define IMX21_CLK_RTC_GATE		62
+#define IMX21_CLK_KPP_GATE		63
+#define IMX21_CLK_OWIRE_GATE		64
+#define IMX21_CLK_MAX			65
+
+#endif
diff --git a/include/dt-bindings/clock/imx27-clock.h b/include/dt-bindings/clock/imx27-clock.h
new file mode 100644
index 000000000000..148b053e54ec
--- /dev/null
+++ b/include/dt-bindings/clock/imx27-clock.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX27_H
+#define __DT_BINDINGS_CLOCK_IMX27_H
+
+#define IMX27_CLK_DUMMY			0
+#define IMX27_CLK_CKIH			1
+#define IMX27_CLK_CKIL			2
+#define IMX27_CLK_MPLL			3
+#define IMX27_CLK_SPLL			4
+#define IMX27_CLK_MPLL_MAIN2		5
+#define IMX27_CLK_AHB			6
+#define IMX27_CLK_IPG			7
+#define IMX27_CLK_NFC_DIV		8
+#define IMX27_CLK_PER1_DIV		9
+#define IMX27_CLK_PER2_DIV		10
+#define IMX27_CLK_PER3_DIV		11
+#define IMX27_CLK_PER4_DIV		12
+#define IMX27_CLK_VPU_SEL		13
+#define IMX27_CLK_VPU_DIV		14
+#define IMX27_CLK_USB_DIV		15
+#define IMX27_CLK_CPU_SEL		16
+#define IMX27_CLK_CLKO_SEL		17
+#define IMX27_CLK_CPU_DIV		18
+#define IMX27_CLK_CLKO_DIV		19
+#define IMX27_CLK_SSI1_SEL		20
+#define IMX27_CLK_SSI2_SEL		21
+#define IMX27_CLK_SSI1_DIV		22
+#define IMX27_CLK_SSI2_DIV		23
+#define IMX27_CLK_CLKO_EN		24
+#define IMX27_CLK_SSI2_IPG_GATE		25
+#define IMX27_CLK_SSI1_IPG_GATE		26
+#define IMX27_CLK_SLCDC_IPG_GATE	27
+#define IMX27_CLK_SDHC3_IPG_GATE	28
+#define IMX27_CLK_SDHC2_IPG_GATE	29
+#define IMX27_CLK_SDHC1_IPG_GATE	30
+#define IMX27_CLK_SCC_IPG_GATE		31
+#define IMX27_CLK_SAHARA_IPG_GATE	32
+#define IMX27_CLK_RTC_IPG_GATE		33
+#define IMX27_CLK_PWM_IPG_GATE		34
+#define IMX27_CLK_OWIRE_IPG_GATE	35
+#define IMX27_CLK_LCDC_IPG_GATE		36
+#define IMX27_CLK_KPP_IPG_GATE		37
+#define IMX27_CLK_IIM_IPG_GATE		38
+#define IMX27_CLK_I2C2_IPG_GATE		39
+#define IMX27_CLK_I2C1_IPG_GATE		40
+#define IMX27_CLK_GPT6_IPG_GATE		41
+#define IMX27_CLK_GPT5_IPG_GATE		42
+#define IMX27_CLK_GPT4_IPG_GATE		43
+#define IMX27_CLK_GPT3_IPG_GATE		44
+#define IMX27_CLK_GPT2_IPG_GATE		45
+#define IMX27_CLK_GPT1_IPG_GATE		46
+#define IMX27_CLK_GPIO_IPG_GATE		47
+#define IMX27_CLK_FEC_IPG_GATE		48
+#define IMX27_CLK_EMMA_IPG_GATE		49
+#define IMX27_CLK_DMA_IPG_GATE		50
+#define IMX27_CLK_CSPI3_IPG_GATE	51
+#define IMX27_CLK_CSPI2_IPG_GATE	52
+#define IMX27_CLK_CSPI1_IPG_GATE	53
+#define IMX27_CLK_NFC_BAUD_GATE		54
+#define IMX27_CLK_SSI2_BAUD_GATE	55
+#define IMX27_CLK_SSI1_BAUD_GATE	56
+#define IMX27_CLK_VPU_BAUD_GATE		57
+#define IMX27_CLK_PER4_GATE		58
+#define IMX27_CLK_PER3_GATE		59
+#define IMX27_CLK_PER2_GATE		60
+#define IMX27_CLK_PER1_GATE		61
+#define IMX27_CLK_USB_AHB_GATE		62
+#define IMX27_CLK_SLCDC_AHB_GATE	63
+#define IMX27_CLK_SAHARA_AHB_GATE	64
+#define IMX27_CLK_LCDC_AHB_GATE		65
+#define IMX27_CLK_VPU_AHB_GATE		66
+#define IMX27_CLK_FEC_AHB_GATE		67
+#define IMX27_CLK_EMMA_AHB_GATE		68
+#define IMX27_CLK_EMI_AHB_GATE		69
+#define IMX27_CLK_DMA_AHB_GATE		70
+#define IMX27_CLK_CSI_AHB_GATE		71
+#define IMX27_CLK_BROM_AHB_GATE		72
+#define IMX27_CLK_ATA_AHB_GATE		73
+#define IMX27_CLK_WDOG_IPG_GATE		74
+#define IMX27_CLK_USB_IPG_GATE		75
+#define IMX27_CLK_UART6_IPG_GATE	76
+#define IMX27_CLK_UART5_IPG_GATE	77
+#define IMX27_CLK_UART4_IPG_GATE	78
+#define IMX27_CLK_UART3_IPG_GATE	79
+#define IMX27_CLK_UART2_IPG_GATE	80
+#define IMX27_CLK_UART1_IPG_GATE	81
+#define IMX27_CLK_CKIH_DIV1P5		82
+#define IMX27_CLK_FPM			83
+#define IMX27_CLK_MPLL_OSC_SEL		84
+#define IMX27_CLK_MPLL_SEL		85
+#define IMX27_CLK_SPLL_GATE		86
+#define IMX27_CLK_MSHC_DIV		87
+#define IMX27_CLK_RTIC_IPG_GATE		88
+#define IMX27_CLK_MSHC_IPG_GATE		89
+#define IMX27_CLK_RTIC_AHB_GATE		90
+#define IMX27_CLK_MSHC_BAUD_GATE	91
+#define IMX27_CLK_CKIH_GATE		92
+#define IMX27_CLK_MAX			93
+
+#endif
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
new file mode 100644
index 000000000000..654151e24288
--- /dev/null
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6QDL_H
+#define __DT_BINDINGS_CLOCK_IMX6QDL_H
+
+#define IMX6QDL_CLK_DUMMY			0
+#define IMX6QDL_CLK_CKIL			1
+#define IMX6QDL_CLK_CKIH			2
+#define IMX6QDL_CLK_OSC				3
+#define IMX6QDL_CLK_PLL2_PFD0_352M		4
+#define IMX6QDL_CLK_PLL2_PFD1_594M		5
+#define IMX6QDL_CLK_PLL2_PFD2_396M		6
+#define IMX6QDL_CLK_PLL3_PFD0_720M		7
+#define IMX6QDL_CLK_PLL3_PFD1_540M		8
+#define IMX6QDL_CLK_PLL3_PFD2_508M		9
+#define IMX6QDL_CLK_PLL3_PFD3_454M		10
+#define IMX6QDL_CLK_PLL2_198M			11
+#define IMX6QDL_CLK_PLL3_120M			12
+#define IMX6QDL_CLK_PLL3_80M			13
+#define IMX6QDL_CLK_PLL3_60M			14
+#define IMX6QDL_CLK_TWD				15
+#define IMX6QDL_CLK_STEP			16
+#define IMX6QDL_CLK_PLL1_SW			17
+#define IMX6QDL_CLK_PERIPH_PRE			18
+#define IMX6QDL_CLK_PERIPH2_PRE			19
+#define IMX6QDL_CLK_PERIPH_CLK2_SEL		20
+#define IMX6QDL_CLK_PERIPH2_CLK2_SEL		21
+#define IMX6QDL_CLK_AXI_SEL			22
+#define IMX6QDL_CLK_ESAI_SEL			23
+#define IMX6QDL_CLK_ASRC_SEL			24
+#define IMX6QDL_CLK_SPDIF_SEL			25
+#define IMX6QDL_CLK_GPU2D_AXI			26
+#define IMX6QDL_CLK_GPU3D_AXI			27
+#define IMX6QDL_CLK_GPU2D_CORE_SEL		28
+#define IMX6QDL_CLK_GPU3D_CORE_SEL		29
+#define IMX6QDL_CLK_GPU3D_SHADER_SEL		30
+#define IMX6QDL_CLK_IPU1_SEL			31
+#define IMX6QDL_CLK_IPU2_SEL			32
+#define IMX6QDL_CLK_LDB_DI0_SEL			33
+#define IMX6QDL_CLK_LDB_DI1_SEL			34
+#define IMX6QDL_CLK_IPU1_DI0_PRE_SEL		35
+#define IMX6QDL_CLK_IPU1_DI1_PRE_SEL		36
+#define IMX6QDL_CLK_IPU2_DI0_PRE_SEL		37
+#define IMX6QDL_CLK_IPU2_DI1_PRE_SEL		38
+#define IMX6QDL_CLK_IPU1_DI0_SEL		39
+#define IMX6QDL_CLK_IPU1_DI1_SEL		40
+#define IMX6QDL_CLK_IPU2_DI0_SEL		41
+#define IMX6QDL_CLK_IPU2_DI1_SEL		42
+#define IMX6QDL_CLK_HSI_TX_SEL			43
+#define IMX6QDL_CLK_PCIE_AXI_SEL		44
+#define IMX6QDL_CLK_SSI1_SEL			45
+#define IMX6QDL_CLK_SSI2_SEL			46
+#define IMX6QDL_CLK_SSI3_SEL			47
+#define IMX6QDL_CLK_USDHC1_SEL			48
+#define IMX6QDL_CLK_USDHC2_SEL			49
+#define IMX6QDL_CLK_USDHC3_SEL			50
+#define IMX6QDL_CLK_USDHC4_SEL			51
+#define IMX6QDL_CLK_ENFC_SEL			52
+#define IMX6QDL_CLK_EMI_SEL			53
+#define IMX6QDL_CLK_EMI_SLOW_SEL		54
+#define IMX6QDL_CLK_VDO_AXI_SEL			55
+#define IMX6QDL_CLK_VPU_AXI_SEL			56
+#define IMX6QDL_CLK_CKO1_SEL			57
+#define IMX6QDL_CLK_PERIPH			58
+#define IMX6QDL_CLK_PERIPH2			59
+#define IMX6QDL_CLK_PERIPH_CLK2			60
+#define IMX6QDL_CLK_PERIPH2_CLK2		61
+#define IMX6QDL_CLK_IPG				62
+#define IMX6QDL_CLK_IPG_PER			63
+#define IMX6QDL_CLK_ESAI_PRED			64
+#define IMX6QDL_CLK_ESAI_PODF			65
+#define IMX6QDL_CLK_ASRC_PRED			66
+#define IMX6QDL_CLK_ASRC_PODF			67
+#define IMX6QDL_CLK_SPDIF_PRED			68
+#define IMX6QDL_CLK_SPDIF_PODF			69
+#define IMX6QDL_CLK_CAN_ROOT			70
+#define IMX6QDL_CLK_ECSPI_ROOT			71
+#define IMX6QDL_CLK_GPU2D_CORE_PODF		72
+#define IMX6QDL_CLK_GPU3D_CORE_PODF		73
+#define IMX6QDL_CLK_GPU3D_SHADER		74
+#define IMX6QDL_CLK_IPU1_PODF			75
+#define IMX6QDL_CLK_IPU2_PODF			76
+#define IMX6QDL_CLK_LDB_DI0_PODF		77
+#define IMX6QDL_CLK_LDB_DI1_PODF		78
+#define IMX6QDL_CLK_IPU1_DI0_PRE		79
+#define IMX6QDL_CLK_IPU1_DI1_PRE		80
+#define IMX6QDL_CLK_IPU2_DI0_PRE		81
+#define IMX6QDL_CLK_IPU2_DI1_PRE		82
+#define IMX6QDL_CLK_HSI_TX_PODF			83
+#define IMX6QDL_CLK_SSI1_PRED			84
+#define IMX6QDL_CLK_SSI1_PODF			85
+#define IMX6QDL_CLK_SSI2_PRED			86
+#define IMX6QDL_CLK_SSI2_PODF			87
+#define IMX6QDL_CLK_SSI3_PRED			88
+#define IMX6QDL_CLK_SSI3_PODF			89
+#define IMX6QDL_CLK_UART_SERIAL_PODF		90
+#define IMX6QDL_CLK_USDHC1_PODF			91
+#define IMX6QDL_CLK_USDHC2_PODF			92
+#define IMX6QDL_CLK_USDHC3_PODF			93
+#define IMX6QDL_CLK_USDHC4_PODF			94
+#define IMX6QDL_CLK_ENFC_PRED			95
+#define IMX6QDL_CLK_ENFC_PODF			96
+#define IMX6QDL_CLK_EMI_PODF			97
+#define IMX6QDL_CLK_EMI_SLOW_PODF		98
+#define IMX6QDL_CLK_VPU_AXI_PODF		99
+#define IMX6QDL_CLK_CKO1_PODF			100
+#define IMX6QDL_CLK_AXI				101
+#define IMX6QDL_CLK_MMDC_CH0_AXI_PODF		102
+#define IMX6QDL_CLK_MMDC_CH1_AXI_PODF		103
+#define IMX6QDL_CLK_ARM				104
+#define IMX6QDL_CLK_AHB				105
+#define IMX6QDL_CLK_APBH_DMA			106
+#define IMX6QDL_CLK_ASRC			107
+#define IMX6QDL_CLK_CAN1_IPG			108
+#define IMX6QDL_CLK_CAN1_SERIAL			109
+#define IMX6QDL_CLK_CAN2_IPG			110
+#define IMX6QDL_CLK_CAN2_SERIAL			111
+#define IMX6QDL_CLK_ECSPI1			112
+#define IMX6QDL_CLK_ECSPI2			113
+#define IMX6QDL_CLK_ECSPI3			114
+#define IMX6QDL_CLK_ECSPI4			115
+#define IMX6Q_CLK_ECSPI5			116
+#define IMX6DL_CLK_I2C4				116
+#define IMX6QDL_CLK_ENET			117
+#define IMX6QDL_CLK_ESAI			118
+#define IMX6QDL_CLK_GPT_IPG			119
+#define IMX6QDL_CLK_GPT_IPG_PER			120
+#define IMX6QDL_CLK_GPU2D_CORE			121
+#define IMX6QDL_CLK_GPU3D_CORE			122
+#define IMX6QDL_CLK_HDMI_IAHB			123
+#define IMX6QDL_CLK_HDMI_ISFR			124
+#define IMX6QDL_CLK_I2C1			125
+#define IMX6QDL_CLK_I2C2			126
+#define IMX6QDL_CLK_I2C3			127
+#define IMX6QDL_CLK_IIM				128
+#define IMX6QDL_CLK_ENFC			129
+#define IMX6QDL_CLK_IPU1			130
+#define IMX6QDL_CLK_IPU1_DI0			131
+#define IMX6QDL_CLK_IPU1_DI1			132
+#define IMX6QDL_CLK_IPU2			133
+#define IMX6QDL_CLK_IPU2_DI0			134
+#define IMX6QDL_CLK_LDB_DI0			135
+#define IMX6QDL_CLK_LDB_DI1			136
+#define IMX6QDL_CLK_IPU2_DI1			137
+#define IMX6QDL_CLK_HSI_TX			138
+#define IMX6QDL_CLK_MLB				139
+#define IMX6QDL_CLK_MMDC_CH0_AXI		140
+#define IMX6QDL_CLK_MMDC_CH1_AXI		141
+#define IMX6QDL_CLK_OCRAM			142
+#define IMX6QDL_CLK_OPENVG_AXI			143
+#define IMX6QDL_CLK_PCIE_AXI			144
+#define IMX6QDL_CLK_PWM1			145
+#define IMX6QDL_CLK_PWM2			146
+#define IMX6QDL_CLK_PWM3			147
+#define IMX6QDL_CLK_PWM4			148
+#define IMX6QDL_CLK_PER1_BCH			149
+#define IMX6QDL_CLK_GPMI_BCH_APB		150
+#define IMX6QDL_CLK_GPMI_BCH			151
+#define IMX6QDL_CLK_GPMI_IO			152
+#define IMX6QDL_CLK_GPMI_APB			153
+#define IMX6QDL_CLK_SATA			154
+#define IMX6QDL_CLK_SDMA			155
+#define IMX6QDL_CLK_SPBA			156
+#define IMX6QDL_CLK_SSI1			157
+#define IMX6QDL_CLK_SSI2			158
+#define IMX6QDL_CLK_SSI3			159
+#define IMX6QDL_CLK_UART_IPG			160
+#define IMX6QDL_CLK_UART_SERIAL			161
+#define IMX6QDL_CLK_USBOH3			162
+#define IMX6QDL_CLK_USDHC1			163
+#define IMX6QDL_CLK_USDHC2			164
+#define IMX6QDL_CLK_USDHC3			165
+#define IMX6QDL_CLK_USDHC4			166
+#define IMX6QDL_CLK_VDO_AXI			167
+#define IMX6QDL_CLK_VPU_AXI			168
+#define IMX6QDL_CLK_CKO1			169
+#define IMX6QDL_CLK_PLL1_SYS			170
+#define IMX6QDL_CLK_PLL2_BUS			171
+#define IMX6QDL_CLK_PLL3_USB_OTG		172
+#define IMX6QDL_CLK_PLL4_AUDIO			173
+#define IMX6QDL_CLK_PLL5_VIDEO			174
+#define IMX6QDL_CLK_PLL8_MLB			175
+#define IMX6QDL_CLK_PLL7_USB_HOST		176
+#define IMX6QDL_CLK_PLL6_ENET			177
+#define IMX6QDL_CLK_SSI1_IPG			178
+#define IMX6QDL_CLK_SSI2_IPG			179
+#define IMX6QDL_CLK_SSI3_IPG			180
+#define IMX6QDL_CLK_ROM				181
+#define IMX6QDL_CLK_USBPHY1			182
+#define IMX6QDL_CLK_USBPHY2			183
+#define IMX6QDL_CLK_LDB_DI0_DIV_3_5		184
+#define IMX6QDL_CLK_LDB_DI1_DIV_3_5		185
+#define IMX6QDL_CLK_SATA_REF			186
+#define IMX6QDL_CLK_SATA_REF_100M		187
+#define IMX6QDL_CLK_PCIE_REF			188
+#define IMX6QDL_CLK_PCIE_REF_125M		189
+#define IMX6QDL_CLK_ENET_REF			190
+#define IMX6QDL_CLK_USBPHY1_GATE		191
+#define IMX6QDL_CLK_USBPHY2_GATE		192
+#define IMX6QDL_CLK_PLL4_POST_DIV		193
+#define IMX6QDL_CLK_PLL5_POST_DIV		194
+#define IMX6QDL_CLK_PLL5_VIDEO_DIV		195
+#define IMX6QDL_CLK_EIM_SLOW			196
+#define IMX6QDL_CLK_SPDIF			197
+#define IMX6QDL_CLK_CKO2_SEL			198
+#define IMX6QDL_CLK_CKO2_PODF			199
+#define IMX6QDL_CLK_CKO2			200
+#define IMX6QDL_CLK_CKO				201
+#define IMX6QDL_CLK_VDOA			202
+#define IMX6QDL_CLK_PLL4_AUDIO_DIV		203
+#define IMX6QDL_CLK_LVDS1_SEL			204
+#define IMX6QDL_CLK_LVDS2_SEL			205
+#define IMX6QDL_CLK_LVDS1_GATE			206
+#define IMX6QDL_CLK_LVDS2_GATE			207
+#define IMX6QDL_CLK_ESAI_AHB			208
+#define IMX6QDL_CLK_END				209
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
diff --git a/include/dt-bindings/clock/imx6sx-clock.h b/include/dt-bindings/clock/imx6sx-clock.h
new file mode 100644
index 000000000000..421d8bb76f2f
--- /dev/null
+++ b/include/dt-bindings/clock/imx6sx-clock.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX6SX_H
+#define __DT_BINDINGS_CLOCK_IMX6SX_H
+
+#define IMX6SX_CLK_DUMMY		0
+#define IMX6SX_CLK_CKIL			1
+#define IMX6SX_CLK_CKIH			2
+#define IMX6SX_CLK_OSC			3
+#define IMX6SX_CLK_PLL1_SYS		4
+#define IMX6SX_CLK_PLL2_BUS		5
+#define IMX6SX_CLK_PLL3_USB_OTG		6
+#define IMX6SX_CLK_PLL4_AUDIO		7
+#define IMX6SX_CLK_PLL5_VIDEO		8
+#define IMX6SX_CLK_PLL6_ENET		9
+#define IMX6SX_CLK_PLL7_USB_HOST	10
+#define IMX6SX_CLK_USBPHY1		11
+#define IMX6SX_CLK_USBPHY2		12
+#define IMX6SX_CLK_USBPHY1_GATE		13
+#define IMX6SX_CLK_USBPHY2_GATE		14
+#define IMX6SX_CLK_PCIE_REF		15
+#define IMX6SX_CLK_PCIE_REF_125M	16
+#define IMX6SX_CLK_ENET_REF		17
+#define IMX6SX_CLK_PLL2_PFD0		18
+#define IMX6SX_CLK_PLL2_PFD1		19
+#define IMX6SX_CLK_PLL2_PFD2		20
+#define IMX6SX_CLK_PLL2_PFD3		21
+#define IMX6SX_CLK_PLL3_PFD0		22
+#define IMX6SX_CLK_PLL3_PFD1		23
+#define IMX6SX_CLK_PLL3_PFD2		24
+#define IMX6SX_CLK_PLL3_PFD3		25
+#define IMX6SX_CLK_PLL2_198M		26
+#define IMX6SX_CLK_PLL3_120M		27
+#define IMX6SX_CLK_PLL3_80M		28
+#define IMX6SX_CLK_PLL3_60M		29
+#define IMX6SX_CLK_TWD			30
+#define IMX6SX_CLK_PLL4_POST_DIV	31
+#define IMX6SX_CLK_PLL4_AUDIO_DIV	32
+#define IMX6SX_CLK_PLL5_POST_DIV	33
+#define IMX6SX_CLK_PLL5_VIDEO_DIV	34
+#define IMX6SX_CLK_STEP			35
+#define IMX6SX_CLK_PLL1_SW		36
+#define IMX6SX_CLK_OCRAM_SEL		37
+#define IMX6SX_CLK_PERIPH_PRE		38
+#define IMX6SX_CLK_PERIPH2_PRE		39
+#define IMX6SX_CLK_PERIPH_CLK2_SEL	40
+#define IMX6SX_CLK_PERIPH2_CLK2_SEL	41
+#define IMX6SX_CLK_PCIE_AXI_SEL		42
+#define IMX6SX_CLK_GPU_AXI_SEL		43
+#define IMX6SX_CLK_GPU_CORE_SEL		44
+#define IMX6SX_CLK_EIM_SLOW_SEL		45
+#define IMX6SX_CLK_USDHC1_SEL		46
+#define IMX6SX_CLK_USDHC2_SEL		47
+#define IMX6SX_CLK_USDHC3_SEL		48
+#define IMX6SX_CLK_USDHC4_SEL		49
+#define IMX6SX_CLK_SSI1_SEL		50
+#define IMX6SX_CLK_SSI2_SEL		51
+#define IMX6SX_CLK_SSI3_SEL		52
+#define IMX6SX_CLK_QSPI1_SEL		53
+#define IMX6SX_CLK_PERCLK_SEL		54
+#define IMX6SX_CLK_VID_SEL		55
+#define IMX6SX_CLK_ESAI_SEL		56
+#define IMX6SX_CLK_LDB_DI0_DIV_SEL	57
+#define IMX6SX_CLK_LDB_DI1_DIV_SEL	58
+#define IMX6SX_CLK_CAN_SEL		59
+#define IMX6SX_CLK_UART_SEL		60
+#define IMX6SX_CLK_QSPI2_SEL		61
+#define IMX6SX_CLK_LDB_DI1_SEL		62
+#define IMX6SX_CLK_LDB_DI0_SEL		63
+#define IMX6SX_CLK_SPDIF_SEL		64
+#define IMX6SX_CLK_AUDIO_SEL		65
+#define IMX6SX_CLK_ENET_PRE_SEL		66
+#define IMX6SX_CLK_ENET_SEL		67
+#define IMX6SX_CLK_M4_PRE_SEL		68
+#define IMX6SX_CLK_M4_SEL		69
+#define IMX6SX_CLK_ECSPI_SEL		70
+#define IMX6SX_CLK_LCDIF1_PRE_SEL	71
+#define IMX6SX_CLK_LCDIF2_PRE_SEL	72
+#define IMX6SX_CLK_LCDIF1_SEL		73
+#define IMX6SX_CLK_LCDIF2_SEL		74
+#define IMX6SX_CLK_DISPLAY_SEL		75
+#define IMX6SX_CLK_CSI_SEL		76
+#define IMX6SX_CLK_CKO1_SEL		77
+#define IMX6SX_CLK_CKO2_SEL		78
+#define IMX6SX_CLK_CKO			79
+#define IMX6SX_CLK_PERIPH_CLK2		80
+#define IMX6SX_CLK_PERIPH2_CLK2		81
+#define IMX6SX_CLK_IPG			82
+#define IMX6SX_CLK_GPU_CORE_PODF	83
+#define IMX6SX_CLK_GPU_AXI_PODF		84
+#define IMX6SX_CLK_LCDIF1_PODF		85
+#define IMX6SX_CLK_QSPI1_PODF		86
+#define IMX6SX_CLK_EIM_SLOW_PODF	87
+#define IMX6SX_CLK_LCDIF2_PODF		88
+#define IMX6SX_CLK_PERCLK		89
+#define IMX6SX_CLK_VID_PODF		90
+#define IMX6SX_CLK_CAN_PODF		91
+#define IMX6SX_CLK_USDHC1_PODF		92
+#define IMX6SX_CLK_USDHC2_PODF		93
+#define IMX6SX_CLK_USDHC3_PODF		94
+#define IMX6SX_CLK_USDHC4_PODF		95
+#define IMX6SX_CLK_UART_PODF		96
+#define IMX6SX_CLK_ESAI_PRED		97
+#define IMX6SX_CLK_ESAI_PODF		98
+#define IMX6SX_CLK_SSI3_PRED		99
+#define IMX6SX_CLK_SSI3_PODF		100
+#define IMX6SX_CLK_SSI1_PRED		101
+#define IMX6SX_CLK_SSI1_PODF		102
+#define IMX6SX_CLK_QSPI2_PRED		103
+#define IMX6SX_CLK_QSPI2_PODF		104
+#define IMX6SX_CLK_SSI2_PRED		105
+#define IMX6SX_CLK_SSI2_PODF		106
+#define IMX6SX_CLK_SPDIF_PRED		107
+#define IMX6SX_CLK_SPDIF_PODF		108
+#define IMX6SX_CLK_AUDIO_PRED		109
+#define IMX6SX_CLK_AUDIO_PODF		110
+#define IMX6SX_CLK_ENET_PODF		111
+#define IMX6SX_CLK_M4_PODF		112
+#define IMX6SX_CLK_ECSPI_PODF		113
+#define IMX6SX_CLK_LCDIF1_PRED		114
+#define IMX6SX_CLK_LCDIF2_PRED		115
+#define IMX6SX_CLK_DISPLAY_PODF		116
+#define IMX6SX_CLK_CSI_PODF		117
+#define IMX6SX_CLK_LDB_DI0_DIV_3_5	118
+#define IMX6SX_CLK_LDB_DI0_DIV_7	119
+#define IMX6SX_CLK_LDB_DI1_DIV_3_5	120
+#define IMX6SX_CLK_LDB_DI1_DIV_7	121
+#define IMX6SX_CLK_CKO1_PODF		122
+#define IMX6SX_CLK_CKO2_PODF		123
+#define IMX6SX_CLK_PERIPH		124
+#define IMX6SX_CLK_PERIPH2		125
+#define IMX6SX_CLK_OCRAM		126
+#define IMX6SX_CLK_AHB			127
+#define IMX6SX_CLK_MMDC_PODF		128
+#define IMX6SX_CLK_ARM			129
+#define IMX6SX_CLK_AIPS_TZ1		130
+#define IMX6SX_CLK_AIPS_TZ2		131
+#define IMX6SX_CLK_APBH_DMA		132
+#define IMX6SX_CLK_ASRC_GATE		133
+#define IMX6SX_CLK_CAAM_MEM		134
+#define IMX6SX_CLK_CAAM_ACLK		135
+#define IMX6SX_CLK_CAAM_IPG		136
+#define IMX6SX_CLK_CAN1_IPG		137
+#define IMX6SX_CLK_CAN1_SERIAL		138
+#define IMX6SX_CLK_CAN2_IPG		139
+#define IMX6SX_CLK_CAN2_SERIAL		140
+#define IMX6SX_CLK_CPU_DEBUG		141
+#define IMX6SX_CLK_DCIC1		142
+#define IMX6SX_CLK_DCIC2		143
+#define IMX6SX_CLK_AIPS_TZ3		144
+#define IMX6SX_CLK_ECSPI1		145
+#define IMX6SX_CLK_ECSPI2		146
+#define IMX6SX_CLK_ECSPI3		147
+#define IMX6SX_CLK_ECSPI4		148
+#define IMX6SX_CLK_ECSPI5		149
+#define IMX6SX_CLK_EPIT1		150
+#define IMX6SX_CLK_EPIT2		151
+#define IMX6SX_CLK_ESAI_EXTAL		152
+#define IMX6SX_CLK_WAKEUP		153
+#define IMX6SX_CLK_GPT_BUS		154
+#define IMX6SX_CLK_GPT_SERIAL		155
+#define IMX6SX_CLK_GPU			156
+#define IMX6SX_CLK_OCRAM_S		157
+#define IMX6SX_CLK_CANFD		158
+#define IMX6SX_CLK_CSI			159
+#define IMX6SX_CLK_I2C1			160
+#define IMX6SX_CLK_I2C2			161
+#define IMX6SX_CLK_I2C3			162
+#define IMX6SX_CLK_OCOTP		163
+#define IMX6SX_CLK_IOMUXC		164
+#define IMX6SX_CLK_IPMUX1		165
+#define IMX6SX_CLK_IPMUX2		166
+#define IMX6SX_CLK_IPMUX3		167
+#define IMX6SX_CLK_TZASC1		168
+#define IMX6SX_CLK_LCDIF_APB		169
+#define IMX6SX_CLK_PXP_AXI		170
+#define IMX6SX_CLK_M4			171
+#define IMX6SX_CLK_ENET			172
+#define IMX6SX_CLK_DISPLAY_AXI		173
+#define IMX6SX_CLK_LCDIF2_PIX		174
+#define IMX6SX_CLK_LCDIF1_PIX		175
+#define IMX6SX_CLK_LDB_DI0		176
+#define IMX6SX_CLK_QSPI1		177
+#define IMX6SX_CLK_MLB			178
+#define IMX6SX_CLK_MMDC_P0_FAST		179
+#define IMX6SX_CLK_MMDC_P0_IPG		180
+#define IMX6SX_CLK_AXI			181
+#define IMX6SX_CLK_PCIE_AXI		182
+#define IMX6SX_CLK_QSPI2		183
+#define IMX6SX_CLK_PER1_BCH		184
+#define IMX6SX_CLK_PER2_MAIN		185
+#define IMX6SX_CLK_PWM1			186
+#define IMX6SX_CLK_PWM2			187
+#define IMX6SX_CLK_PWM3			188
+#define IMX6SX_CLK_PWM4			189
+#define IMX6SX_CLK_GPMI_BCH_APB		190
+#define IMX6SX_CLK_GPMI_BCH		191
+#define IMX6SX_CLK_GPMI_IO		192
+#define IMX6SX_CLK_GPMI_APB		193
+#define IMX6SX_CLK_ROM			194
+#define IMX6SX_CLK_SDMA			195
+#define IMX6SX_CLK_SPBA			196
+#define IMX6SX_CLK_SPDIF		197
+#define IMX6SX_CLK_SSI1_IPG		198
+#define IMX6SX_CLK_SSI2_IPG		199
+#define IMX6SX_CLK_SSI3_IPG		200
+#define IMX6SX_CLK_SSI1			201
+#define IMX6SX_CLK_SSI2			202
+#define IMX6SX_CLK_SSI3			203
+#define IMX6SX_CLK_UART_IPG		204
+#define IMX6SX_CLK_UART_SERIAL		205
+#define IMX6SX_CLK_SAI1			206
+#define IMX6SX_CLK_SAI2			207
+#define IMX6SX_CLK_USBOH3		208
+#define IMX6SX_CLK_USDHC1		209
+#define IMX6SX_CLK_USDHC2		210
+#define IMX6SX_CLK_USDHC3		211
+#define IMX6SX_CLK_USDHC4		212
+#define IMX6SX_CLK_EIM_SLOW		213
+#define IMX6SX_CLK_PWM8			214
+#define IMX6SX_CLK_VADC			215
+#define IMX6SX_CLK_GIS			216
+#define IMX6SX_CLK_I2C4			217
+#define IMX6SX_CLK_PWM5			218
+#define IMX6SX_CLK_PWM6			219
+#define IMX6SX_CLK_PWM7			220
+#define IMX6SX_CLK_CKO1			221
+#define IMX6SX_CLK_CKO2			222
+#define IMX6SX_CLK_IPP_DI0		223
+#define IMX6SX_CLK_IPP_DI1		224
+#define IMX6SX_CLK_ENET_AHB		225
+#define IMX6SX_CLK_OCRAM_PODF		226
+#define IMX6SX_CLK_GPT_3M		227
+#define IMX6SX_CLK_ENET_PTP		228
+#define IMX6SX_CLK_ENET_PTP_REF		229
+#define IMX6SX_CLK_ENET2_REF		230
+#define IMX6SX_CLK_ENET2_REF_125M	231
+#define IMX6SX_CLK_AUDIO		232
+#define IMX6SX_CLK_LVDS1_SEL		233
+#define IMX6SX_CLK_LVDS1_OUT		234
+#define IMX6SX_CLK_ASRC_IPG		235
+#define IMX6SX_CLK_ASRC_MEM		236
+#define IMX6SX_CLK_SAI1_IPG		237
+#define IMX6SX_CLK_SAI2_IPG		238
+#define IMX6SX_CLK_ESAI_IPG		239
+#define IMX6SX_CLK_ESAI_MEM		240
+#define IMX6SX_CLK_CLK_END		241
+
+#endif /* __DT_BINDINGS_CLOCK_IMX6SX_H */
diff --git a/include/dt-bindings/clock/lsi,axm5516-clks.h b/include/dt-bindings/clock/lsi,axm5516-clks.h
new file mode 100644
index 000000000000..beb41ace5dd6
--- /dev/null
+++ b/include/dt-bindings/clock/lsi,axm5516-clks.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2014 LSI Corporation
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ */
+
+#ifndef _DT_BINDINGS_CLK_AXM5516_H
+#define _DT_BINDINGS_CLK_AXM5516_H
+
+#define AXXIA_CLK_FAB_PLL	0
+#define AXXIA_CLK_CPU_PLL	1
+#define AXXIA_CLK_SYS_PLL	2
+#define AXXIA_CLK_SM0_PLL	3
+#define AXXIA_CLK_SM1_PLL	4
+#define AXXIA_CLK_FAB_DIV	5
+#define AXXIA_CLK_SYS_DIV	6
+#define AXXIA_CLK_NRCP_DIV	7
+#define AXXIA_CLK_CPU0_DIV	8
+#define AXXIA_CLK_CPU1_DIV	9
+#define AXXIA_CLK_CPU2_DIV	10
+#define AXXIA_CLK_CPU3_DIV	11
+#define AXXIA_CLK_PER_DIV	12
+#define AXXIA_CLK_MMC_DIV	13
+#define AXXIA_CLK_FAB		14
+#define AXXIA_CLK_SYS		15
+#define AXXIA_CLK_NRCP		16
+#define AXXIA_CLK_CPU0		17
+#define AXXIA_CLK_CPU1		18
+#define AXXIA_CLK_CPU2		19
+#define AXXIA_CLK_CPU3		20
+#define AXXIA_CLK_PER		21
+#define AXXIA_CLK_MMC		22
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,gcc-apq8084.h b/include/dt-bindings/clock/qcom,gcc-apq8084.h
new file mode 100644
index 000000000000..2c0da566c46a
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-apq8084.h
@@ -0,0 +1,351 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_APQ_GCC_8084_H
+#define _DT_BINDINGS_CLK_APQ_GCC_8084_H
+
+#define GPLL0						0
+#define GPLL0_VOTE					1
+#define GPLL1						2
+#define GPLL1_VOTE					3
+#define GPLL2						4
+#define GPLL2_VOTE					5
+#define GPLL3						6
+#define GPLL3_VOTE					7
+#define GPLL4						8
+#define GPLL4_VOTE					9
+#define CONFIG_NOC_CLK_SRC				10
+#define PERIPH_NOC_CLK_SRC				11
+#define SYSTEM_NOC_CLK_SRC				12
+#define BLSP_UART_SIM_CLK_SRC				13
+#define QDSS_TSCTR_CLK_SRC				14
+#define UFS_AXI_CLK_SRC					15
+#define RPM_CLK_SRC					16
+#define KPSS_AHB_CLK_SRC				17
+#define QDSS_AT_CLK_SRC					18
+#define BIMC_DDR_CLK_SRC				19
+#define USB30_MASTER_CLK_SRC				20
+#define USB30_SEC_MASTER_CLK_SRC			21
+#define USB_HSIC_AHB_CLK_SRC				22
+#define MMSS_BIMC_GFX_CLK_SRC				23
+#define QDSS_STM_CLK_SRC				24
+#define ACC_CLK_SRC					25
+#define SEC_CTRL_CLK_SRC				26
+#define BLSP1_QUP1_I2C_APPS_CLK_SRC			27
+#define BLSP1_QUP1_SPI_APPS_CLK_SRC			28
+#define BLSP1_QUP2_I2C_APPS_CLK_SRC			29
+#define BLSP1_QUP2_SPI_APPS_CLK_SRC			30
+#define BLSP1_QUP3_I2C_APPS_CLK_SRC			31
+#define BLSP1_QUP3_SPI_APPS_CLK_SRC			32
+#define BLSP1_QUP4_I2C_APPS_CLK_SRC			33
+#define BLSP1_QUP4_SPI_APPS_CLK_SRC			34
+#define BLSP1_QUP5_I2C_APPS_CLK_SRC			35
+#define BLSP1_QUP5_SPI_APPS_CLK_SRC			36
+#define BLSP1_QUP6_I2C_APPS_CLK_SRC			37
+#define BLSP1_QUP6_SPI_APPS_CLK_SRC			38
+#define BLSP1_UART1_APPS_CLK_SRC			39
+#define BLSP1_UART2_APPS_CLK_SRC			40
+#define BLSP1_UART3_APPS_CLK_SRC			41
+#define BLSP1_UART4_APPS_CLK_SRC			42
+#define BLSP1_UART5_APPS_CLK_SRC			43
+#define BLSP1_UART6_APPS_CLK_SRC			44
+#define BLSP2_QUP1_I2C_APPS_CLK_SRC			45
+#define BLSP2_QUP1_SPI_APPS_CLK_SRC			46
+#define BLSP2_QUP2_I2C_APPS_CLK_SRC			47
+#define BLSP2_QUP2_SPI_APPS_CLK_SRC			48
+#define BLSP2_QUP3_I2C_APPS_CLK_SRC			49
+#define BLSP2_QUP3_SPI_APPS_CLK_SRC			50
+#define BLSP2_QUP4_I2C_APPS_CLK_SRC			51
+#define BLSP2_QUP4_SPI_APPS_CLK_SRC			52
+#define BLSP2_QUP5_I2C_APPS_CLK_SRC			53
+#define BLSP2_QUP5_SPI_APPS_CLK_SRC			54
+#define BLSP2_QUP6_I2C_APPS_CLK_SRC			55
+#define BLSP2_QUP6_SPI_APPS_CLK_SRC			56
+#define BLSP2_UART1_APPS_CLK_SRC			57
+#define BLSP2_UART2_APPS_CLK_SRC			58
+#define BLSP2_UART3_APPS_CLK_SRC			59
+#define BLSP2_UART4_APPS_CLK_SRC			60
+#define BLSP2_UART5_APPS_CLK_SRC			61
+#define BLSP2_UART6_APPS_CLK_SRC			62
+#define CE1_CLK_SRC					63
+#define CE2_CLK_SRC					64
+#define CE3_CLK_SRC					65
+#define GP1_CLK_SRC					66
+#define GP2_CLK_SRC					67
+#define GP3_CLK_SRC					68
+#define PDM2_CLK_SRC					69
+#define QDSS_TRACECLKIN_CLK_SRC				70
+#define RBCPR_CLK_SRC					71
+#define SATA_ASIC0_CLK_SRC				72
+#define SATA_PMALIVE_CLK_SRC				73
+#define SATA_RX_CLK_SRC					74
+#define SATA_RX_OOB_CLK_SRC				75
+#define SDCC1_APPS_CLK_SRC				76
+#define SDCC2_APPS_CLK_SRC				77
+#define SDCC3_APPS_CLK_SRC				78
+#define SDCC4_APPS_CLK_SRC				79
+#define GCC_SNOC_BUS_TIMEOUT0_AHB_CLK			80
+#define SPMI_AHB_CLK_SRC				81
+#define SPMI_SER_CLK_SRC				82
+#define TSIF_REF_CLK_SRC				83
+#define USB30_MOCK_UTMI_CLK_SRC				84
+#define USB30_SEC_MOCK_UTMI_CLK_SRC			85
+#define USB_HS_SYSTEM_CLK_SRC				86
+#define USB_HSIC_CLK_SRC				87
+#define USB_HSIC_IO_CAL_CLK_SRC				88
+#define USB_HSIC_MOCK_UTMI_CLK_SRC			89
+#define USB_HSIC_SYSTEM_CLK_SRC				90
+#define GCC_BAM_DMA_AHB_CLK				91
+#define GCC_BAM_DMA_INACTIVITY_TIMERS_CLK		92
+#define DDR_CLK_SRC					93
+#define GCC_BIMC_CFG_AHB_CLK				94
+#define GCC_BIMC_CLK					95
+#define GCC_BIMC_KPSS_AXI_CLK				96
+#define GCC_BIMC_SLEEP_CLK				97
+#define GCC_BIMC_SYSNOC_AXI_CLK				98
+#define GCC_BIMC_XO_CLK					99
+#define GCC_BLSP1_AHB_CLK				100
+#define GCC_BLSP1_SLEEP_CLK				101
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK			102
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK			103
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK			104
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK			105
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK			106
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK			107
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK			108
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK			109
+#define GCC_BLSP1_QUP5_I2C_APPS_CLK			110
+#define GCC_BLSP1_QUP5_SPI_APPS_CLK			111
+#define GCC_BLSP1_QUP6_I2C_APPS_CLK			112
+#define GCC_BLSP1_QUP6_SPI_APPS_CLK			113
+#define GCC_BLSP1_UART1_APPS_CLK			114
+#define GCC_BLSP1_UART1_SIM_CLK				115
+#define GCC_BLSP1_UART2_APPS_CLK			116
+#define GCC_BLSP1_UART2_SIM_CLK				117
+#define GCC_BLSP1_UART3_APPS_CLK			118
+#define GCC_BLSP1_UART3_SIM_CLK				119
+#define GCC_BLSP1_UART4_APPS_CLK			120
+#define GCC_BLSP1_UART4_SIM_CLK				121
+#define GCC_BLSP1_UART5_APPS_CLK			122
+#define GCC_BLSP1_UART5_SIM_CLK				123
+#define GCC_BLSP1_UART6_APPS_CLK			124
+#define GCC_BLSP1_UART6_SIM_CLK				125
+#define GCC_BLSP2_AHB_CLK				126
+#define GCC_BLSP2_SLEEP_CLK				127
+#define GCC_BLSP2_QUP1_I2C_APPS_CLK			128
+#define GCC_BLSP2_QUP1_SPI_APPS_CLK			129
+#define GCC_BLSP2_QUP2_I2C_APPS_CLK			130
+#define GCC_BLSP2_QUP2_SPI_APPS_CLK			131
+#define GCC_BLSP2_QUP3_I2C_APPS_CLK			132
+#define GCC_BLSP2_QUP3_SPI_APPS_CLK			133
+#define GCC_BLSP2_QUP4_I2C_APPS_CLK			134
+#define GCC_BLSP2_QUP4_SPI_APPS_CLK			135
+#define GCC_BLSP2_QUP5_I2C_APPS_CLK			136
+#define GCC_BLSP2_QUP5_SPI_APPS_CLK			137
+#define GCC_BLSP2_QUP6_I2C_APPS_CLK			138
+#define GCC_BLSP2_QUP6_SPI_APPS_CLK			139
+#define GCC_BLSP2_UART1_APPS_CLK			140
+#define GCC_BLSP2_UART1_SIM_CLK				141
+#define GCC_BLSP2_UART2_APPS_CLK			142
+#define GCC_BLSP2_UART2_SIM_CLK				143
+#define GCC_BLSP2_UART3_APPS_CLK			144
+#define GCC_BLSP2_UART3_SIM_CLK				145
+#define GCC_BLSP2_UART4_APPS_CLK			146
+#define GCC_BLSP2_UART4_SIM_CLK				147
+#define GCC_BLSP2_UART5_APPS_CLK			148
+#define GCC_BLSP2_UART5_SIM_CLK				149
+#define GCC_BLSP2_UART6_APPS_CLK			150
+#define GCC_BLSP2_UART6_SIM_CLK				151
+#define GCC_BOOT_ROM_AHB_CLK				152
+#define GCC_CE1_AHB_CLK					153
+#define GCC_CE1_AXI_CLK					154
+#define GCC_CE1_CLK					155
+#define GCC_CE2_AHB_CLK					156
+#define GCC_CE2_AXI_CLK					157
+#define GCC_CE2_CLK					158
+#define GCC_CE3_AHB_CLK					159
+#define GCC_CE3_AXI_CLK					160
+#define GCC_CE3_CLK					161
+#define GCC_CNOC_BUS_TIMEOUT0_AHB_CLK			162
+#define GCC_CNOC_BUS_TIMEOUT1_AHB_CLK			163
+#define GCC_CNOC_BUS_TIMEOUT2_AHB_CLK			164
+#define GCC_CNOC_BUS_TIMEOUT3_AHB_CLK			165
+#define GCC_CNOC_BUS_TIMEOUT4_AHB_CLK			166
+#define GCC_CNOC_BUS_TIMEOUT5_AHB_CLK			167
+#define GCC_CNOC_BUS_TIMEOUT6_AHB_CLK			168
+#define GCC_CNOC_BUS_TIMEOUT7_AHB_CLK			169
+#define GCC_CFG_NOC_AHB_CLK				170
+#define GCC_CFG_NOC_DDR_CFG_CLK				171
+#define GCC_CFG_NOC_RPM_AHB_CLK				172
+#define GCC_COPSS_SMMU_AHB_CLK				173
+#define GCC_COPSS_SMMU_AXI_CLK				174
+#define GCC_DCD_XO_CLK					175
+#define GCC_BIMC_DDR_CH0_CLK				176
+#define GCC_BIMC_DDR_CH1_CLK				177
+#define GCC_BIMC_DDR_CPLL0_CLK				178
+#define GCC_BIMC_DDR_CPLL1_CLK				179
+#define GCC_BIMC_GFX_CLK				180
+#define GCC_DDR_DIM_CFG_CLK				181
+#define GCC_DDR_DIM_SLEEP_CLK				182
+#define GCC_DEHR_CLK					183
+#define GCC_AHB_CLK					184
+#define GCC_IM_SLEEP_CLK				185
+#define GCC_XO_CLK					186
+#define GCC_XO_DIV4_CLK					187
+#define GCC_GP1_CLK					188
+#define GCC_GP2_CLK					189
+#define GCC_GP3_CLK					190
+#define GCC_IMEM_AXI_CLK				191
+#define GCC_IMEM_CFG_AHB_CLK				192
+#define GCC_KPSS_AHB_CLK				193
+#define GCC_KPSS_AXI_CLK				194
+#define GCC_LPASS_MPORT_AXI_CLK				195
+#define GCC_LPASS_Q6_AXI_CLK				196
+#define GCC_LPASS_SWAY_CLK				197
+#define GCC_MMSS_BIMC_GFX_CLK				198
+#define GCC_MMSS_NOC_AT_CLK				199
+#define GCC_MMSS_NOC_CFG_AHB_CLK			200
+#define GCC_MMSS_VPU_MAPLE_SYS_NOC_AXI_CLK		201
+#define GCC_OCMEM_NOC_CFG_AHB_CLK			202
+#define GCC_OCMEM_SYS_NOC_AXI_CLK			203
+#define GCC_MPM_AHB_CLK					204
+#define GCC_MSG_RAM_AHB_CLK				205
+#define GCC_NOC_CONF_XPU_AHB_CLK			206
+#define GCC_PDM2_CLK					207
+#define GCC_PDM_AHB_CLK					208
+#define GCC_PDM_XO4_CLK					209
+#define GCC_PERIPH_NOC_AHB_CLK				210
+#define GCC_PERIPH_NOC_AT_CLK				211
+#define GCC_PERIPH_NOC_CFG_AHB_CLK			212
+#define GCC_PERIPH_NOC_USB_HSIC_AHB_CLK			213
+#define GCC_PERIPH_NOC_MPU_CFG_AHB_CLK			214
+#define GCC_PERIPH_XPU_AHB_CLK				215
+#define GCC_PNOC_BUS_TIMEOUT0_AHB_CLK			216
+#define GCC_PNOC_BUS_TIMEOUT1_AHB_CLK			217
+#define GCC_PNOC_BUS_TIMEOUT2_AHB_CLK			218
+#define GCC_PNOC_BUS_TIMEOUT3_AHB_CLK			219
+#define GCC_PNOC_BUS_TIMEOUT4_AHB_CLK			220
+#define GCC_PRNG_AHB_CLK				221
+#define GCC_QDSS_AT_CLK					222
+#define GCC_QDSS_CFG_AHB_CLK				223
+#define GCC_QDSS_DAP_AHB_CLK				224
+#define GCC_QDSS_DAP_CLK				225
+#define GCC_QDSS_ETR_USB_CLK				226
+#define GCC_QDSS_STM_CLK				227
+#define GCC_QDSS_TRACECLKIN_CLK				228
+#define GCC_QDSS_TSCTR_DIV16_CLK			229
+#define GCC_QDSS_TSCTR_DIV2_CLK				230
+#define GCC_QDSS_TSCTR_DIV3_CLK				231
+#define GCC_QDSS_TSCTR_DIV4_CLK				232
+#define GCC_QDSS_TSCTR_DIV8_CLK				233
+#define GCC_QDSS_RBCPR_XPU_AHB_CLK			234
+#define GCC_RBCPR_AHB_CLK				235
+#define GCC_RBCPR_CLK					236
+#define GCC_RPM_BUS_AHB_CLK				237
+#define GCC_RPM_PROC_HCLK				238
+#define GCC_RPM_SLEEP_CLK				239
+#define GCC_RPM_TIMER_CLK				240
+#define GCC_SATA_ASIC0_CLK				241
+#define GCC_SATA_AXI_CLK				242
+#define GCC_SATA_CFG_AHB_CLK				243
+#define GCC_SATA_PMALIVE_CLK				244
+#define GCC_SATA_RX_CLK					245
+#define GCC_SATA_RX_OOB_CLK				246
+#define GCC_SDCC1_AHB_CLK				247
+#define GCC_SDCC1_APPS_CLK				248
+#define GCC_SDCC1_CDCCAL_FF_CLK				249
+#define GCC_SDCC1_CDCCAL_SLEEP_CLK			250
+#define GCC_SDCC2_AHB_CLK				251
+#define GCC_SDCC2_APPS_CLK				252
+#define GCC_SDCC2_INACTIVITY_TIMERS_CLK			253
+#define GCC_SDCC3_AHB_CLK				254
+#define GCC_SDCC3_APPS_CLK				255
+#define GCC_SDCC3_INACTIVITY_TIMERS_CLK			256
+#define GCC_SDCC4_AHB_CLK				257
+#define GCC_SDCC4_APPS_CLK				258
+#define GCC_SDCC4_INACTIVITY_TIMERS_CLK			259
+#define GCC_SEC_CTRL_ACC_CLK				260
+#define GCC_SEC_CTRL_AHB_CLK				261
+#define GCC_SEC_CTRL_BOOT_ROM_PATCH_CLK			262
+#define GCC_SEC_CTRL_CLK				263
+#define GCC_SEC_CTRL_SENSE_CLK				264
+#define GCC_SNOC_BUS_TIMEOUT2_AHB_CLK			265
+#define GCC_SNOC_BUS_TIMEOUT3_AHB_CLK			266
+#define GCC_SPDM_BIMC_CY_CLK				267
+#define GCC_SPDM_CFG_AHB_CLK				268
+#define GCC_SPDM_DEBUG_CY_CLK				269
+#define GCC_SPDM_FF_CLK					270
+#define GCC_SPDM_MSTR_AHB_CLK				271
+#define GCC_SPDM_PNOC_CY_CLK				272
+#define GCC_SPDM_RPM_CY_CLK				273
+#define GCC_SPDM_SNOC_CY_CLK				274
+#define GCC_SPMI_AHB_CLK				275
+#define GCC_SPMI_CNOC_AHB_CLK				276
+#define GCC_SPMI_SER_CLK				277
+#define GCC_SPSS_AHB_CLK				278
+#define GCC_SNOC_CNOC_AHB_CLK				279
+#define GCC_SNOC_PNOC_AHB_CLK				280
+#define GCC_SYS_NOC_AT_CLK				281
+#define GCC_SYS_NOC_AXI_CLK				282
+#define GCC_SYS_NOC_KPSS_AHB_CLK			283
+#define GCC_SYS_NOC_QDSS_STM_AXI_CLK			284
+#define GCC_SYS_NOC_UFS_AXI_CLK				285
+#define GCC_SYS_NOC_USB3_AXI_CLK			286
+#define GCC_SYS_NOC_USB3_SEC_AXI_CLK			287
+#define GCC_TCSR_AHB_CLK				288
+#define GCC_TLMM_AHB_CLK				289
+#define GCC_TLMM_CLK					290
+#define GCC_TSIF_AHB_CLK				291
+#define GCC_TSIF_INACTIVITY_TIMERS_CLK			292
+#define GCC_TSIF_REF_CLK				293
+#define GCC_UFS_AHB_CLK					294
+#define GCC_UFS_AXI_CLK					295
+#define GCC_UFS_RX_CFG_CLK				296
+#define GCC_UFS_RX_SYMBOL_0_CLK				297
+#define GCC_UFS_RX_SYMBOL_1_CLK				298
+#define GCC_UFS_TX_CFG_CLK				299
+#define GCC_UFS_TX_SYMBOL_0_CLK				300
+#define GCC_UFS_TX_SYMBOL_1_CLK				301
+#define GCC_USB2A_PHY_SLEEP_CLK				302
+#define GCC_USB2B_PHY_SLEEP_CLK				303
+#define GCC_USB30_MASTER_CLK				304
+#define GCC_USB30_MOCK_UTMI_CLK				305
+#define GCC_USB30_SLEEP_CLK				306
+#define GCC_USB30_SEC_MASTER_CLK			307
+#define GCC_USB30_SEC_MOCK_UTMI_CLK			308
+#define GCC_USB30_SEC_SLEEP_CLK				309
+#define GCC_USB_HS_AHB_CLK				310
+#define GCC_USB_HS_INACTIVITY_TIMERS_CLK		311
+#define GCC_USB_HS_SYSTEM_CLK				312
+#define GCC_USB_HSIC_AHB_CLK				313
+#define GCC_USB_HSIC_CLK				314
+#define GCC_USB_HSIC_IO_CAL_CLK				315
+#define GCC_USB_HSIC_IO_CAL_SLEEP_CLK			316
+#define GCC_USB_HSIC_MOCK_UTMI_CLK			317
+#define GCC_USB_HSIC_SYSTEM_CLK				318
+#define PCIE_0_AUX_CLK_SRC				319
+#define PCIE_0_PIPE_CLK_SRC				320
+#define PCIE_1_AUX_CLK_SRC				321
+#define PCIE_1_PIPE_CLK_SRC				322
+#define GCC_PCIE_0_AUX_CLK				323
+#define GCC_PCIE_0_CFG_AHB_CLK				324
+#define GCC_PCIE_0_MSTR_AXI_CLK				325
+#define GCC_PCIE_0_PIPE_CLK				326
+#define GCC_PCIE_0_SLV_AXI_CLK				327
+#define GCC_PCIE_1_AUX_CLK				328
+#define GCC_PCIE_1_CFG_AHB_CLK				329
+#define GCC_PCIE_1_MSTR_AXI_CLK				330
+#define GCC_PCIE_1_PIPE_CLK				331
+#define GCC_PCIE_1_SLV_AXI_CLK				332
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
new file mode 100644
index 000000000000..b857cadb0bd4
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_GCC_IPQ806X_H
+#define _DT_BINDINGS_CLK_GCC_IPQ806X_H
+
+#define AFAB_CLK_SRC				0
+#define QDSS_STM_CLK				1
+#define SCSS_A_CLK				2
+#define SCSS_H_CLK				3
+#define AFAB_CORE_CLK				4
+#define SCSS_XO_SRC_CLK				5
+#define AFAB_EBI1_CH0_A_CLK			6
+#define AFAB_EBI1_CH1_A_CLK			7
+#define AFAB_AXI_S0_FCLK			8
+#define AFAB_AXI_S1_FCLK			9
+#define AFAB_AXI_S2_FCLK			10
+#define AFAB_AXI_S3_FCLK			11
+#define AFAB_AXI_S4_FCLK			12
+#define SFAB_CORE_CLK				13
+#define SFAB_AXI_S0_FCLK			14
+#define SFAB_AXI_S1_FCLK			15
+#define SFAB_AXI_S2_FCLK			16
+#define SFAB_AXI_S3_FCLK			17
+#define SFAB_AXI_S4_FCLK			18
+#define SFAB_AXI_S5_FCLK			19
+#define SFAB_AHB_S0_FCLK			20
+#define SFAB_AHB_S1_FCLK			21
+#define SFAB_AHB_S2_FCLK			22
+#define SFAB_AHB_S3_FCLK			23
+#define SFAB_AHB_S4_FCLK			24
+#define SFAB_AHB_S5_FCLK			25
+#define SFAB_AHB_S6_FCLK			26
+#define SFAB_AHB_S7_FCLK			27
+#define QDSS_AT_CLK_SRC				28
+#define QDSS_AT_CLK				29
+#define QDSS_TRACECLKIN_CLK_SRC			30
+#define QDSS_TRACECLKIN_CLK			31
+#define QDSS_TSCTR_CLK_SRC			32
+#define QDSS_TSCTR_CLK				33
+#define SFAB_ADM0_M0_A_CLK			34
+#define SFAB_ADM0_M1_A_CLK			35
+#define SFAB_ADM0_M2_H_CLK			36
+#define ADM0_CLK				37
+#define ADM0_PBUS_CLK				38
+#define IMEM0_A_CLK				39
+#define QDSS_H_CLK				40
+#define PCIE_A_CLK				41
+#define PCIE_AUX_CLK				42
+#define PCIE_H_CLK				43
+#define PCIE_PHY_CLK				44
+#define SFAB_CLK_SRC				45
+#define SFAB_LPASS_Q6_A_CLK			46
+#define SFAB_AFAB_M_A_CLK			47
+#define AFAB_SFAB_M0_A_CLK			48
+#define AFAB_SFAB_M1_A_CLK			49
+#define SFAB_SATA_S_H_CLK			50
+#define DFAB_CLK_SRC				51
+#define DFAB_CLK				52
+#define SFAB_DFAB_M_A_CLK			53
+#define DFAB_SFAB_M_A_CLK			54
+#define DFAB_SWAY0_H_CLK			55
+#define DFAB_SWAY1_H_CLK			56
+#define DFAB_ARB0_H_CLK				57
+#define DFAB_ARB1_H_CLK				58
+#define PPSS_H_CLK				59
+#define PPSS_PROC_CLK				60
+#define PPSS_TIMER0_CLK				61
+#define PPSS_TIMER1_CLK				62
+#define PMEM_A_CLK				63
+#define DMA_BAM_H_CLK				64
+#define SIC_H_CLK				65
+#define SPS_TIC_H_CLK				66
+#define CFPB_2X_CLK_SRC				67
+#define CFPB_CLK				68
+#define CFPB0_H_CLK				69
+#define CFPB1_H_CLK				70
+#define CFPB2_H_CLK				71
+#define SFAB_CFPB_M_H_CLK			72
+#define CFPB_MASTER_H_CLK			73
+#define SFAB_CFPB_S_H_CLK			74
+#define CFPB_SPLITTER_H_CLK			75
+#define TSIF_H_CLK				76
+#define TSIF_INACTIVITY_TIMERS_CLK		77
+#define TSIF_REF_SRC				78
+#define TSIF_REF_CLK				79
+#define CE1_H_CLK				80
+#define CE1_CORE_CLK				81
+#define CE1_SLEEP_CLK				82
+#define CE2_H_CLK				83
+#define CE2_CORE_CLK				84
+#define SFPB_H_CLK_SRC				85
+#define SFPB_H_CLK				86
+#define SFAB_SFPB_M_H_CLK			87
+#define SFAB_SFPB_S_H_CLK			88
+#define RPM_PROC_CLK				89
+#define RPM_BUS_H_CLK				90
+#define RPM_SLEEP_CLK				91
+#define RPM_TIMER_CLK				92
+#define RPM_MSG_RAM_H_CLK			93
+#define PMIC_ARB0_H_CLK				94
+#define PMIC_ARB1_H_CLK				95
+#define PMIC_SSBI2_SRC				96
+#define PMIC_SSBI2_CLK				97
+#define SDC1_H_CLK				98
+#define SDC2_H_CLK				99
+#define SDC3_H_CLK				100
+#define SDC4_H_CLK				101
+#define SDC1_SRC				102
+#define SDC1_CLK				103
+#define SDC2_SRC				104
+#define SDC2_CLK				105
+#define SDC3_SRC				106
+#define SDC3_CLK				107
+#define SDC4_SRC				108
+#define SDC4_CLK				109
+#define USB_HS1_H_CLK				110
+#define USB_HS1_XCVR_SRC			111
+#define USB_HS1_XCVR_CLK			112
+#define USB_HSIC_H_CLK				113
+#define USB_HSIC_XCVR_SRC			114
+#define USB_HSIC_XCVR_CLK			115
+#define USB_HSIC_SYSTEM_CLK_SRC			116
+#define USB_HSIC_SYSTEM_CLK			117
+#define CFPB0_C0_H_CLK				118
+#define CFPB0_D0_H_CLK				119
+#define CFPB0_C1_H_CLK				120
+#define CFPB0_D1_H_CLK				121
+#define USB_FS1_H_CLK				122
+#define USB_FS1_XCVR_SRC			123
+#define USB_FS1_XCVR_CLK			124
+#define USB_FS1_SYSTEM_CLK			125
+#define GSBI_COMMON_SIM_SRC			126
+#define GSBI1_H_CLK				127
+#define GSBI2_H_CLK				128
+#define GSBI3_H_CLK				129
+#define GSBI4_H_CLK				130
+#define GSBI5_H_CLK				131
+#define GSBI6_H_CLK				132
+#define GSBI7_H_CLK				133
+#define GSBI1_QUP_SRC				134
+#define GSBI1_QUP_CLK				135
+#define GSBI2_QUP_SRC				136
+#define GSBI2_QUP_CLK				137
+#define GSBI3_QUP_SRC				138
+#define GSBI3_QUP_CLK				139
+#define GSBI4_QUP_SRC				140
+#define GSBI4_QUP_CLK				141
+#define GSBI5_QUP_SRC				142
+#define GSBI5_QUP_CLK				143
+#define GSBI6_QUP_SRC				144
+#define GSBI6_QUP_CLK				145
+#define GSBI7_QUP_SRC				146
+#define GSBI7_QUP_CLK				147
+#define GSBI1_UART_SRC				148
+#define GSBI1_UART_CLK				149
+#define GSBI2_UART_SRC				150
+#define GSBI2_UART_CLK				151
+#define GSBI3_UART_SRC				152
+#define GSBI3_UART_CLK				153
+#define GSBI4_UART_SRC				154
+#define GSBI4_UART_CLK				155
+#define GSBI5_UART_SRC				156
+#define GSBI5_UART_CLK				157
+#define GSBI6_UART_SRC				158
+#define GSBI6_UART_CLK				159
+#define GSBI7_UART_SRC				160
+#define GSBI7_UART_CLK				161
+#define GSBI1_SIM_CLK				162
+#define GSBI2_SIM_CLK				163
+#define GSBI3_SIM_CLK				164
+#define GSBI4_SIM_CLK				165
+#define GSBI5_SIM_CLK				166
+#define GSBI6_SIM_CLK				167
+#define GSBI7_SIM_CLK				168
+#define USB_HSIC_HSIC_CLK_SRC			169
+#define USB_HSIC_HSIC_CLK			170
+#define USB_HSIC_HSIO_CAL_CLK			171
+#define SPDM_CFG_H_CLK				172
+#define SPDM_MSTR_H_CLK				173
+#define SPDM_FF_CLK_SRC				174
+#define SPDM_FF_CLK				175
+#define SEC_CTRL_CLK				176
+#define SEC_CTRL_ACC_CLK_SRC			177
+#define SEC_CTRL_ACC_CLK			178
+#define TLMM_H_CLK				179
+#define TLMM_CLK				180
+#define SATA_H_CLK				181
+#define SATA_CLK_SRC				182
+#define SATA_RXOOB_CLK				183
+#define SATA_PMALIVE_CLK			184
+#define SATA_PHY_REF_CLK			185
+#define SATA_A_CLK				186
+#define SATA_PHY_CFG_CLK			187
+#define TSSC_CLK_SRC				188
+#define TSSC_CLK				189
+#define PDM_SRC					190
+#define PDM_CLK					191
+#define GP0_SRC					192
+#define GP0_CLK					193
+#define GP1_SRC					194
+#define GP1_CLK					195
+#define GP2_SRC					196
+#define GP2_CLK					197
+#define MPM_CLK					198
+#define EBI1_CLK_SRC				199
+#define EBI1_CH0_CLK				200
+#define EBI1_CH1_CLK				201
+#define EBI1_2X_CLK				202
+#define EBI1_CH0_DQ_CLK				203
+#define EBI1_CH1_DQ_CLK				204
+#define EBI1_CH0_CA_CLK				205
+#define EBI1_CH1_CA_CLK				206
+#define EBI1_XO_CLK				207
+#define SFAB_SMPSS_S_H_CLK			208
+#define PRNG_SRC				209
+#define PRNG_CLK				210
+#define PXO_SRC					211
+#define SPDM_CY_PORT0_CLK			212
+#define SPDM_CY_PORT1_CLK			213
+#define SPDM_CY_PORT2_CLK			214
+#define SPDM_CY_PORT3_CLK			215
+#define SPDM_CY_PORT4_CLK			216
+#define SPDM_CY_PORT5_CLK			217
+#define SPDM_CY_PORT6_CLK			218
+#define SPDM_CY_PORT7_CLK			219
+#define PLL0					220
+#define PLL0_VOTE				221
+#define PLL3					222
+#define PLL3_VOTE				223
+#define PLL4					224
+#define PLL4_VOTE				225
+#define PLL8					226
+#define PLL8_VOTE				227
+#define PLL9					228
+#define PLL10					229
+#define PLL11					230
+#define PLL12					231
+#define PLL14					232
+#define PLL14_VOTE				233
+#define PLL18					234
+#define CE5_SRC					235
+#define CE5_H_CLK				236
+#define CE5_CORE_CLK				237
+#define CE3_SLEEP_CLK				238
+#define SFAB_AHB_S8_FCLK			239
+#define SPDM_CY_PORT8_CLK			246
+#define PCIE_ALT_REF_SRC			247
+#define PCIE_ALT_REF_CLK			248
+#define PCIE_1_A_CLK				249
+#define PCIE_1_AUX_CLK				250
+#define PCIE_1_H_CLK				251
+#define PCIE_1_PHY_CLK				252
+#define PCIE_1_ALT_REF_SRC			253
+#define PCIE_1_ALT_REF_CLK			254
+#define PCIE_2_A_CLK				255
+#define PCIE_2_AUX_CLK				256
+#define PCIE_2_H_CLK				257
+#define PCIE_2_PHY_CLK				258
+#define PCIE_2_ALT_REF_SRC			259
+#define PCIE_2_ALT_REF_CLK			260
+#define EBI2_CLK				261
+#define USB30_SLEEP_CLK				262
+#define USB30_UTMI_SRC				263
+#define USB30_0_UTMI_CLK			264
+#define USB30_1_UTMI_CLK			265
+#define USB30_MASTER_SRC			266
+#define USB30_0_MASTER_CLK			267
+#define USB30_1_MASTER_CLK			268
+#define GMAC_CORE1_CLK_SRC			269
+#define GMAC_CORE2_CLK_SRC			270
+#define GMAC_CORE3_CLK_SRC			271
+#define GMAC_CORE4_CLK_SRC			272
+#define GMAC_CORE1_CLK				273
+#define GMAC_CORE2_CLK				274
+#define GMAC_CORE3_CLK				275
+#define GMAC_CORE4_CLK				276
+#define UBI32_CORE1_CLK_SRC			277
+#define UBI32_CORE2_CLK_SRC			278
+#define UBI32_CORE1_CLK				279
+#define UBI32_CORE2_CLK				280
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,mmcc-apq8084.h b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
new file mode 100644
index 000000000000..a929f86d0ddd
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_APQ_MMCC_8084_H
+#define _DT_BINDINGS_CLK_APQ_MMCC_8084_H
+
+#define MMSS_AHB_CLK_SRC		0
+#define MMSS_AXI_CLK_SRC		1
+#define MMPLL0				2
+#define MMPLL0_VOTE			3
+#define MMPLL1				4
+#define MMPLL1_VOTE			5
+#define MMPLL2				6
+#define MMPLL3				7
+#define MMPLL4				8
+#define CSI0_CLK_SRC			9
+#define CSI1_CLK_SRC			10
+#define CSI2_CLK_SRC			11
+#define CSI3_CLK_SRC			12
+#define VCODEC0_CLK_SRC			13
+#define VFE0_CLK_SRC			14
+#define VFE1_CLK_SRC			15
+#define MDP_CLK_SRC			16
+#define PCLK0_CLK_SRC			17
+#define PCLK1_CLK_SRC			18
+#define OCMEMNOC_CLK_SRC		19
+#define GFX3D_CLK_SRC			20
+#define JPEG0_CLK_SRC			21
+#define JPEG1_CLK_SRC			22
+#define JPEG2_CLK_SRC			23
+#define EDPPIXEL_CLK_SRC		24
+#define EXTPCLK_CLK_SRC			25
+#define VP_CLK_SRC			26
+#define CCI_CLK_SRC			27
+#define CAMSS_GP0_CLK_SRC		28
+#define CAMSS_GP1_CLK_SRC		29
+#define MCLK0_CLK_SRC			30
+#define MCLK1_CLK_SRC			31
+#define MCLK2_CLK_SRC			32
+#define MCLK3_CLK_SRC			33
+#define CSI0PHYTIMER_CLK_SRC		34
+#define CSI1PHYTIMER_CLK_SRC		35
+#define CSI2PHYTIMER_CLK_SRC		36
+#define CPP_CLK_SRC			37
+#define BYTE0_CLK_SRC			38
+#define BYTE1_CLK_SRC			39
+#define EDPAUX_CLK_SRC			40
+#define EDPLINK_CLK_SRC			41
+#define ESC0_CLK_SRC			42
+#define ESC1_CLK_SRC			43
+#define HDMI_CLK_SRC			44
+#define VSYNC_CLK_SRC			45
+#define RBCPR_CLK_SRC			46
+#define RBBMTIMER_CLK_SRC		47
+#define MAPLE_CLK_SRC			48
+#define VDP_CLK_SRC			49
+#define VPU_BUS_CLK_SRC			50
+#define MMSS_CXO_CLK			51
+#define MMSS_SLEEPCLK_CLK		52
+#define AVSYNC_AHB_CLK			53
+#define AVSYNC_EDPPIXEL_CLK		54
+#define AVSYNC_EXTPCLK_CLK		55
+#define AVSYNC_PCLK0_CLK		56
+#define AVSYNC_PCLK1_CLK		57
+#define AVSYNC_VP_CLK			58
+#define CAMSS_AHB_CLK			59
+#define CAMSS_CCI_CCI_AHB_CLK		60
+#define CAMSS_CCI_CCI_CLK		61
+#define CAMSS_CSI0_AHB_CLK		62
+#define CAMSS_CSI0_CLK			63
+#define CAMSS_CSI0PHY_CLK		64
+#define CAMSS_CSI0PIX_CLK		65
+#define CAMSS_CSI0RDI_CLK		66
+#define CAMSS_CSI1_AHB_CLK		67
+#define CAMSS_CSI1_CLK			68
+#define CAMSS_CSI1PHY_CLK		69
+#define CAMSS_CSI1PIX_CLK		70
+#define CAMSS_CSI1RDI_CLK		71
+#define CAMSS_CSI2_AHB_CLK		72
+#define CAMSS_CSI2_CLK			73
+#define CAMSS_CSI2PHY_CLK		74
+#define CAMSS_CSI2PIX_CLK		75
+#define CAMSS_CSI2RDI_CLK		76
+#define CAMSS_CSI3_AHB_CLK		77
+#define CAMSS_CSI3_CLK			78
+#define CAMSS_CSI3PHY_CLK		79
+#define CAMSS_CSI3PIX_CLK		80
+#define CAMSS_CSI3RDI_CLK		81
+#define CAMSS_CSI_VFE0_CLK		82
+#define CAMSS_CSI_VFE1_CLK		83
+#define CAMSS_GP0_CLK			84
+#define CAMSS_GP1_CLK			85
+#define CAMSS_ISPIF_AHB_CLK		86
+#define CAMSS_JPEG_JPEG0_CLK		87
+#define CAMSS_JPEG_JPEG1_CLK		88
+#define CAMSS_JPEG_JPEG2_CLK		89
+#define CAMSS_JPEG_JPEG_AHB_CLK		90
+#define CAMSS_JPEG_JPEG_AXI_CLK		91
+#define CAMSS_MCLK0_CLK			92
+#define CAMSS_MCLK1_CLK			93
+#define CAMSS_MCLK2_CLK			94
+#define CAMSS_MCLK3_CLK			95
+#define CAMSS_MICRO_AHB_CLK		96
+#define CAMSS_PHY0_CSI0PHYTIMER_CLK	97
+#define CAMSS_PHY1_CSI1PHYTIMER_CLK	98
+#define CAMSS_PHY2_CSI2PHYTIMER_CLK	99
+#define CAMSS_TOP_AHB_CLK		100
+#define CAMSS_VFE_CPP_AHB_CLK		101
+#define CAMSS_VFE_CPP_CLK		102
+#define CAMSS_VFE_VFE0_CLK		103
+#define CAMSS_VFE_VFE1_CLK		104
+#define CAMSS_VFE_VFE_AHB_CLK		105
+#define CAMSS_VFE_VFE_AXI_CLK		106
+#define MDSS_AHB_CLK			107
+#define MDSS_AXI_CLK			108
+#define MDSS_BYTE0_CLK			109
+#define MDSS_BYTE1_CLK			110
+#define MDSS_EDPAUX_CLK			111
+#define MDSS_EDPLINK_CLK		112
+#define MDSS_EDPPIXEL_CLK		113
+#define MDSS_ESC0_CLK			114
+#define MDSS_ESC1_CLK			115
+#define MDSS_EXTPCLK_CLK		116
+#define MDSS_HDMI_AHB_CLK		117
+#define MDSS_HDMI_CLK			118
+#define MDSS_MDP_CLK			119
+#define MDSS_MDP_LUT_CLK		120
+#define MDSS_PCLK0_CLK			121
+#define MDSS_PCLK1_CLK			122
+#define MDSS_VSYNC_CLK			123
+#define MMSS_RBCPR_AHB_CLK		124
+#define MMSS_RBCPR_CLK			125
+#define MMSS_SPDM_AHB_CLK		126
+#define MMSS_SPDM_AXI_CLK		127
+#define MMSS_SPDM_CSI0_CLK		128
+#define MMSS_SPDM_GFX3D_CLK		129
+#define MMSS_SPDM_JPEG0_CLK		130
+#define MMSS_SPDM_JPEG1_CLK		131
+#define MMSS_SPDM_JPEG2_CLK		132
+#define MMSS_SPDM_MDP_CLK		133
+#define MMSS_SPDM_PCLK0_CLK		134
+#define MMSS_SPDM_PCLK1_CLK		135
+#define MMSS_SPDM_VCODEC0_CLK		136
+#define MMSS_SPDM_VFE0_CLK		137
+#define MMSS_SPDM_VFE1_CLK		138
+#define MMSS_SPDM_RM_AXI_CLK		139
+#define MMSS_SPDM_RM_OCMEMNOC_CLK	140
+#define MMSS_MISC_AHB_CLK		141
+#define MMSS_MMSSNOC_AHB_CLK		142
+#define MMSS_MMSSNOC_BTO_AHB_CLK	143
+#define MMSS_MMSSNOC_AXI_CLK		144
+#define MMSS_S0_AXI_CLK			145
+#define OCMEMCX_AHB_CLK			146
+#define OCMEMCX_OCMEMNOC_CLK		147
+#define OXILI_OCMEMGX_CLK		148
+#define OXILI_GFX3D_CLK			149
+#define OXILI_RBBMTIMER_CLK		150
+#define OXILICX_AHB_CLK			151
+#define VENUS0_AHB_CLK			152
+#define VENUS0_AXI_CLK			153
+#define VENUS0_CORE0_VCODEC_CLK		154
+#define VENUS0_CORE1_VCODEC_CLK		155
+#define VENUS0_OCMEMNOC_CLK		156
+#define VENUS0_VCODEC0_CLK		157
+#define VPU_AHB_CLK			158
+#define VPU_AXI_CLK			159
+#define VPU_BUS_CLK			160
+#define VPU_CXO_CLK			161
+#define VPU_MAPLE_CLK			162
+#define VPU_SLEEP_CLK			163
+#define VPU_VDP_CLK			164
+
+#endif
diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h
new file mode 100644
index 000000000000..5128f4d94f44
--- /dev/null
+++ b/include/dt-bindings/clock/r7s72100-clock.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R7S72100_H__
+#define __DT_BINDINGS_CLOCK_R7S72100_H__
+
+#define R7S72100_CLK_PLL	0
+
+/* MSTP3 */
+#define R7S72100_CLK_MTU2	3
+
+/* MSTP4 */
+#define R7S72100_CLK_SCIF0	7
+#define R7S72100_CLK_SCIF1	6
+#define R7S72100_CLK_SCIF2	5
+#define R7S72100_CLK_SCIF3	4
+#define R7S72100_CLK_SCIF4	3
+#define R7S72100_CLK_SCIF5	2
+#define R7S72100_CLK_SCIF6	1
+#define R7S72100_CLK_SCIF7	0
+
+/* MSTP9 */
+#define R7S72100_CLK_I2C0	7
+#define R7S72100_CLK_I2C1	6
+#define R7S72100_CLK_I2C2	5
+#define R7S72100_CLK_I2C3	4
+
+/* MSTP10 */
+#define R7S72100_CLK_SPI0	7
+#define R7S72100_CLK_SPI1	6
+#define R7S72100_CLK_SPI2	5
+#define R7S72100_CLK_SPI3	4
+#define R7S72100_CLK_SPI4	3
+
+#endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */
diff --git a/include/dt-bindings/clock/r8a7779-clock.h b/include/dt-bindings/clock/r8a7779-clock.h
new file mode 100644
index 000000000000..381a6114237a
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7779-clock.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2013  Horms Solutions Ltd.
+ *
+ * Contact: Simon Horman <horms@verge.net.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7779_H__
+#define __DT_BINDINGS_CLOCK_R8A7779_H__
+
+/* CPG */
+#define R8A7779_CLK_PLLA	0
+#define R8A7779_CLK_Z		1
+#define R8A7779_CLK_ZS		2
+#define R8A7779_CLK_S		3
+#define R8A7779_CLK_S1		4
+#define R8A7779_CLK_P		5
+#define R8A7779_CLK_B		6
+#define R8A7779_CLK_OUT		7
+
+/* MSTP 0 */
+#define R8A7779_CLK_HSPI	7
+#define R8A7779_CLK_TMU2	14
+#define R8A7779_CLK_TMU1	15
+#define R8A7779_CLK_TMU0	16
+#define R8A7779_CLK_HSCIF1	18
+#define R8A7779_CLK_HSCIF0	19
+#define R8A7779_CLK_SCIF5	21
+#define R8A7779_CLK_SCIF4	22
+#define R8A7779_CLK_SCIF3	23
+#define R8A7779_CLK_SCIF2	24
+#define R8A7779_CLK_SCIF1	25
+#define R8A7779_CLK_SCIF0	26
+#define R8A7779_CLK_I2C3	27
+#define R8A7779_CLK_I2C2	28
+#define R8A7779_CLK_I2C1	29
+#define R8A7779_CLK_I2C0	30
+
+/* MSTP 1 */
+#define R8A7779_CLK_USB01	0
+#define R8A7779_CLK_USB2	1
+#define R8A7779_CLK_DU		3
+#define R8A7779_CLK_VIN2	8
+#define R8A7779_CLK_VIN1	9
+#define R8A7779_CLK_VIN0	10
+#define R8A7779_CLK_ETHER	14
+#define R8A7779_CLK_SATA	15
+#define R8A7779_CLK_PCIE	16
+#define R8A7779_CLK_VIN3	20
+
+/* MSTP 3 */
+#define R8A7779_CLK_SDHI3	20
+#define R8A7779_CLK_SDHI2	21
+#define R8A7779_CLK_SDHI1	22
+#define R8A7779_CLK_SDHI0	23
+#define R8A7779_CLK_MMC1	30
+#define R8A7779_CLK_MMC0	31
+
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7779_H__ */
diff --git a/include/dt-bindings/clock/rk3066a-cru.h b/include/dt-bindings/clock/rk3066a-cru.h
new file mode 100644
index 000000000000..bc1ed1dbd855
--- /dev/null
+++ b/include/dt-bindings/clock/rk3066a-cru.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/clock/rk3188-cru-common.h>
+
+/* soft-reset indices */
+#define SRST_SRST1		0
+#define SRST_SRST2		1
+
+#define SRST_L2MEM		18
+#define SRST_I2S0		23
+#define SRST_I2S1		24
+#define SRST_I2S2		25
+#define SRST_TIMER2		29
+
+#define SRST_GPIO4		36
+#define SRST_GPIO6		38
+
+#define SRST_TSADC		92
+
+#define SRST_HDMI		96
+#define SRST_HDMI_APB		97
+#define SRST_CIF1		111
diff --git a/include/dt-bindings/clock/rk3188-cru-common.h b/include/dt-bindings/clock/rk3188-cru-common.h
new file mode 100644
index 000000000000..750ee60e75fb
--- /dev/null
+++ b/include/dt-bindings/clock/rk3188-cru-common.h
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* core clocks from */
+#define PLL_APLL		1
+#define PLL_DPLL		2
+#define PLL_CPLL		3
+#define PLL_GPLL		4
+#define CORE_PERI		5
+#define CORE_L2C		6
+
+/* sclk gates (special clocks) */
+#define SCLK_UART0		64
+#define SCLK_UART1		65
+#define SCLK_UART2		66
+#define SCLK_UART3		67
+#define SCLK_MAC		68
+#define SCLK_SPI0		69
+#define SCLK_SPI1		70
+#define SCLK_SARADC		71
+#define SCLK_SDMMC		72
+#define SCLK_SDIO		73
+#define SCLK_EMMC		74
+#define SCLK_I2S0		75
+#define SCLK_I2S1		76
+#define SCLK_I2S2		77
+#define SCLK_SPDIF		78
+#define SCLK_CIF0		79
+#define SCLK_CIF1		80
+#define SCLK_OTGPHY0		81
+#define SCLK_OTGPHY1		82
+#define SCLK_HSADC		83
+#define SCLK_TIMER0		84
+#define SCLK_TIMER1		85
+#define SCLK_TIMER2		86
+#define SCLK_TIMER3		87
+#define SCLK_TIMER4		88
+#define SCLK_TIMER5		89
+#define SCLK_TIMER6		90
+#define SCLK_JTAG		91
+#define SCLK_SMC		92
+
+#define DCLK_LCDC0		190
+#define DCLK_LCDC1		191
+
+/* aclk gates */
+#define ACLK_DMA1		192
+#define ACLK_DMA2		193
+#define ACLK_GPS		194
+#define ACLK_LCDC0		195
+#define ACLK_LCDC1		196
+#define ACLK_GPU		197
+#define ACLK_SMC		198
+#define ACLK_CIF		199
+#define ACLK_IPP		200
+#define ACLK_RGA		201
+#define ACLK_CIF0		202
+
+/* pclk gates */
+#define PCLK_GRF		320
+#define PCLK_PMU		321
+#define PCLK_TIMER0		322
+#define PCLK_TIMER1		323
+#define PCLK_TIMER2		324
+#define PCLK_TIMER3		325
+#define PCLK_PWM01		326
+#define PCLK_PWM23		327
+#define PCLK_SPI0		328
+#define PCLK_SPI1		329
+#define PCLK_SARADC		330
+#define PCLK_WDT		331
+#define PCLK_UART0		332
+#define PCLK_UART1		333
+#define PCLK_UART2		334
+#define PCLK_UART3		335
+#define PCLK_I2C0		336
+#define PCLK_I2C1		337
+#define PCLK_I2C2		338
+#define PCLK_I2C3		339
+#define PCLK_I2C4		340
+#define PCLK_GPIO0		341
+#define PCLK_GPIO1		342
+#define PCLK_GPIO2		343
+#define PCLK_GPIO3		344
+#define PCLK_GPIO4		345
+#define PCLK_GPIO6		346
+#define PCLK_EFUSE		347
+#define PCLK_TZPC		348
+#define PCLK_TSADC		349
+
+/* hclk gates */
+#define HCLK_SDMMC		448
+#define HCLK_SDIO		449
+#define HCLK_EMMC		450
+#define HCLK_OTG0		451
+#define HCLK_EMAC		452
+#define HCLK_SPDIF		453
+#define HCLK_I2S0		454
+#define HCLK_I2S1		455
+#define HCLK_I2S2		456
+#define HCLK_OTG1		457
+#define HCLK_HSIC		458
+#define HCLK_HSADC		459
+#define HCLK_PIDF		460
+#define HCLK_LCDC0		461
+#define HCLK_LCDC1		462
+#define HCLK_ROM		463
+#define HCLK_CIF0		464
+#define HCLK_IPP		465
+#define HCLK_RGA		466
+#define HCLK_NANDC0		467
+
+#define CLK_NR_CLKS		(HCLK_NANDC0 + 1)
+
+/* soft-reset indices */
+#define SRST_MCORE		2
+#define SRST_CORE0		3
+#define SRST_CORE1		4
+#define SRST_MCORE_DBG		7
+#define SRST_CORE0_DBG		8
+#define SRST_CORE1_DBG		9
+#define SRST_CORE0_WDT		12
+#define SRST_CORE1_WDT		13
+#define SRST_STRC_SYS		14
+#define SRST_L2C		15
+
+#define SRST_CPU_AHB		17
+#define SRST_AHB2APB		19
+#define SRST_DMA1		20
+#define SRST_INTMEM		21
+#define SRST_ROM		22
+#define SRST_SPDIF		26
+#define SRST_TIMER0		27
+#define SRST_TIMER1		28
+#define SRST_EFUSE		30
+
+#define SRST_GPIO0		32
+#define SRST_GPIO1		33
+#define SRST_GPIO2		34
+#define SRST_GPIO3		35
+
+#define SRST_UART0		39
+#define SRST_UART1		40
+#define SRST_UART2		41
+#define SRST_UART3		42
+#define SRST_I2C0		43
+#define SRST_I2C1		44
+#define SRST_I2C2		45
+#define SRST_I2C3		46
+#define SRST_I2C4		47
+
+#define SRST_PWM0		48
+#define SRST_PWM1		49
+#define SRST_DAP_PO		50
+#define SRST_DAP		51
+#define SRST_DAP_SYS		52
+#define SRST_TPIU_ATB		53
+#define SRST_PMU_APB		54
+#define SRST_GRF		55
+#define SRST_PMU		56
+#define SRST_PERI_AXI		57
+#define SRST_PERI_AHB		58
+#define SRST_PERI_APB		59
+#define SRST_PERI_NIU		60
+#define SRST_CPU_PERI		61
+#define SRST_EMEM_PERI		62
+#define SRST_USB_PERI		63
+
+#define SRST_DMA2		64
+#define SRST_SMC		65
+#define SRST_MAC		66
+#define SRST_NANC0		68
+#define SRST_USBOTG0		69
+#define SRST_USBPHY0		70
+#define SRST_OTGC0		71
+#define SRST_USBOTG1		72
+#define SRST_USBPHY1		73
+#define SRST_OTGC1		74
+#define SRST_HSADC		76
+#define SRST_PIDFILTER		77
+#define SRST_DDR_MSCH		79
+
+#define SRST_TZPC		80
+#define SRST_SDMMC		81
+#define SRST_SDIO		82
+#define SRST_EMMC		83
+#define SRST_SPI0		84
+#define SRST_SPI1		85
+#define SRST_WDT		86
+#define SRST_SARADC		87
+#define SRST_DDRPHY		88
+#define SRST_DDRPHY_APB		89
+#define SRST_DDRCTL		90
+#define SRST_DDRCTL_APB		91
+#define SRST_DDRPUB		93
+
+#define SRST_VIO0_AXI		98
+#define SRST_VIO0_AHB		99
+#define SRST_LCDC0_AXI		100
+#define SRST_LCDC0_AHB		101
+#define SRST_LCDC0_DCLK		102
+#define SRST_LCDC1_AXI		103
+#define SRST_LCDC1_AHB		104
+#define SRST_LCDC1_DCLK		105
+#define SRST_IPP_AXI		106
+#define SRST_IPP_AHB		107
+#define SRST_RGA_AXI		108
+#define SRST_RGA_AHB		109
+#define SRST_CIF0		110
+
+#define SRST_VCODEC_AXI		112
+#define SRST_VCODEC_AHB		113
+#define SRST_VIO1_AXI		114
+#define SRST_VCODEC_CPU		115
+#define SRST_VCODEC_NIU		116
+#define SRST_GPU		120
+#define SRST_GPU_NIU		122
+#define SRST_TFUN_ATB		125
+#define SRST_TFUN_APB		126
+#define SRST_CTI4_APB		127
+
+#define SRST_TPIU_APB		128
+#define SRST_TRACE		129
+#define SRST_CORE_DBG		130
+#define SRST_DBG_APB		131
+#define SRST_CTI0		132
+#define SRST_CTI0_APB		133
+#define SRST_CTI1		134
+#define SRST_CTI1_APB		135
+#define SRST_PTM_CORE0		136
+#define SRST_PTM_CORE1		137
+#define SRST_PTM0		138
+#define SRST_PTM0_ATB		139
+#define SRST_PTM1		140
+#define SRST_PTM1_ATB		141
+#define SRST_CTM		142
+#define SRST_TS			143
diff --git a/include/dt-bindings/clock/rk3188-cru.h b/include/dt-bindings/clock/rk3188-cru.h
new file mode 100644
index 000000000000..9fac8edd3f9d
--- /dev/null
+++ b/include/dt-bindings/clock/rk3188-cru.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/clock/rk3188-cru-common.h>
+
+/* soft-reset indices */
+#define SRST_PTM_CORE2		0
+#define SRST_PTM_CORE3		1
+#define SRST_CORE2		5
+#define SRST_CORE3		6
+#define SRST_CORE2_DBG		10
+#define SRST_CORE3_DBG		11
+
+#define SRST_TIMER2		16
+#define SRST_TIMER4		23
+#define SRST_I2S0		24
+#define SRST_TIMER5		25
+#define SRST_TIMER3		29
+#define SRST_TIMER6		31
+
+#define SRST_PTM3		36
+#define SRST_PTM3_ATB		37
+
+#define SRST_GPS		67
+#define SRST_HSICPHY		75
+#define SRST_TIMER		78
+
+#define SRST_PTM2		92
+#define SRST_CORE2_WDT		94
+#define SRST_CORE3_WDT		95
+
+#define SRST_PTM2_ATB		111
+
+#define SRST_HSIC		117
+#define SRST_CTI2		118
+#define SRST_CTI2_APB		119
+#define SRST_GPU_BRIDGE		121
+#define SRST_CTI3		123
+#define SRST_CTI3_APB		124
diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
new file mode 100644
index 000000000000..ebcb460ea4ad
--- /dev/null
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -0,0 +1,278 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/* core clocks */
+#define PLL_APLL		1
+#define PLL_DPLL		2
+#define PLL_CPLL		3
+#define PLL_GPLL		4
+#define PLL_NPLL		5
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU		64
+#define SCLK_SPI0		65
+#define SCLK_SPI1		66
+#define SCLK_SPI2		67
+#define SCLK_SDMMC		68
+#define SCLK_SDIO0		69
+#define SCLK_SDIO1		70
+#define SCLK_EMMC		71
+#define SCLK_TSADC		72
+#define SCLK_SARADC		73
+#define SCLK_PS2C		74
+#define SCLK_NANDC0		75
+#define SCLK_NANDC1		76
+#define SCLK_UART0		77
+#define SCLK_UART1		78
+#define SCLK_UART2		79
+#define SCLK_UART3		80
+#define SCLK_UART4		81
+#define SCLK_I2S0		82
+#define SCLK_SPDIF		83
+#define SCLK_SPDIF8CH		84
+#define SCLK_TIMER0		85
+#define SCLK_TIMER1		86
+#define SCLK_TIMER2		87
+#define SCLK_TIMER3		88
+#define SCLK_TIMER4		89
+#define SCLK_TIMER5		90
+#define SCLK_TIMER6		91
+#define SCLK_HSADC		92
+#define SCLK_OTGPHY0		93
+#define SCLK_OTGPHY1		94
+#define SCLK_OTGPHY2		95
+#define SCLK_OTG_ADP		96
+#define SCLK_HSICPHY480M	97
+#define SCLK_HSICPHY12M		98
+#define SCLK_MACREF		99
+#define SCLK_LCDC_PWM0		100
+#define SCLK_LCDC_PWM1		101
+#define SCLK_MAC_RX		102
+#define SCLK_MAC_TX		103
+
+#define DCLK_VOP0		190
+#define DCLK_VOP1		191
+
+/* aclk gates */
+#define ACLK_GPU		192
+#define ACLK_DMAC1		193
+#define ACLK_DMAC2		194
+#define ACLK_MMU		195
+#define ACLK_GMAC		196
+#define ACLK_VOP0		197
+#define ACLK_VOP1		198
+#define ACLK_CRYPTO		199
+#define ACLK_RGA		200
+
+/* pclk gates */
+#define PCLK_GPIO0		320
+#define PCLK_GPIO1		321
+#define PCLK_GPIO2		322
+#define PCLK_GPIO3		323
+#define PCLK_GPIO4		324
+#define PCLK_GPIO5		325
+#define PCLK_GPIO6		326
+#define PCLK_GPIO7		327
+#define PCLK_GPIO8		328
+#define PCLK_GRF		329
+#define PCLK_SGRF		330
+#define PCLK_PMU		331
+#define PCLK_I2C0		332
+#define PCLK_I2C1		333
+#define PCLK_I2C2		334
+#define PCLK_I2C3		335
+#define PCLK_I2C4		336
+#define PCLK_I2C5		337
+#define PCLK_SPI0		338
+#define PCLK_SPI1		339
+#define PCLK_SPI2		340
+#define PCLK_UART0		341
+#define PCLK_UART1		342
+#define PCLK_UART2		343
+#define PCLK_UART3		344
+#define PCLK_UART4		345
+#define PCLK_TSADC		346
+#define PCLK_SARADC		347
+#define PCLK_SIM		348
+#define PCLK_GMAC		349
+#define PCLK_PWM		350
+#define PCLK_RKPWM		351
+#define PCLK_PS2C		352
+#define PCLK_TIMER		353
+#define PCLK_TZPC		354
+
+/* hclk gates */
+#define HCLK_GPS		448
+#define HCLK_OTG0		449
+#define HCLK_USBHOST0		450
+#define HCLK_USBHOST1		451
+#define HCLK_HSIC		452
+#define HCLK_NANDC0		453
+#define HCLK_NANDC1		454
+#define HCLK_TSP		455
+#define HCLK_SDMMC		456
+#define HCLK_SDIO0		457
+#define HCLK_SDIO1		458
+#define HCLK_EMMC		459
+#define HCLK_HSADC		460
+#define HCLK_CRYPTO		461
+#define HCLK_I2S0		462
+#define HCLK_SPDIF		463
+#define HCLK_SPDIF8CH		464
+#define HCLK_VOP0		465
+#define HCLK_VOP1		466
+#define HCLK_ROM		467
+#define HCLK_IEP		468
+#define HCLK_ISP		469
+#define HCLK_RGA		470
+
+#define CLK_NR_CLKS		(HCLK_RGA + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0		0
+#define SRST_CORE1		1
+#define SRST_CORE2		2
+#define SRST_CORE3		3
+#define SRST_CORE0_PO		4
+#define SRST_CORE1_PO		5
+#define SRST_CORE2_PO		6
+#define SRST_CORE3_PO		7
+#define SRST_PDCORE_STRSYS	8
+#define SRST_PDBUS_STRSYS	9
+#define SRST_L2C		10
+#define SRST_TOPDBG		11
+#define SRST_CORE0_DBG		12
+#define SRST_CORE1_DBG		13
+#define SRST_CORE2_DBG		14
+#define SRST_CORE3_DBG		15
+
+#define SRST_PDBUG_AHB_ARBITOR	16
+#define SRST_EFUSE256		17
+#define SRST_DMAC1		18
+#define SRST_INTMEM		19
+#define SRST_ROM		20
+#define SRST_SPDIF8CH		21
+#define SRST_TIMER		22
+#define SRST_I2S0		23
+#define SRST_SPDIF		24
+#define SRST_TIMER0		25
+#define SRST_TIMER1		26
+#define SRST_TIMER2		27
+#define SRST_TIMER3		28
+#define SRST_TIMER4		29
+#define SRST_TIMER5		30
+#define SRST_EFUSE		31
+
+#define SRST_GPIO0		32
+#define SRST_GPIO1		33
+#define SRST_GPIO2		34
+#define SRST_GPIO3		35
+#define SRST_GPIO4		36
+#define SRST_GPIO5		37
+#define SRST_GPIO6		38
+#define SRST_GPIO7		39
+#define SRST_GPIO8		40
+#define SRST_I2C0		42
+#define SRST_I2C1		43
+#define SRST_I2C2		44
+#define SRST_I2C3		45
+#define SRST_I2C4		46
+#define SRST_I2C5		47
+
+#define SRST_DWPWM		48
+#define SRST_MMC_PERI		49
+#define SRST_PERIPH_MMU		50
+#define SRST_DAP		51
+#define SRST_DAP_SYS		52
+#define SRST_TPIU		53
+#define SRST_PMU_APB		54
+#define SRST_GRF		55
+#define SRST_PMU		56
+#define SRST_PERIPH_AXI		57
+#define SRST_PERIPH_AHB		58
+#define SRST_PERIPH_APB		59
+#define SRST_PERIPH_NIU		60
+#define SRST_PDPERI_AHB_ARBI	61
+#define SRST_EMEM		62
+#define SRST_USB_PERI		63
+
+#define SRST_DMAC2		64
+#define SRST_MAC		66
+#define SRST_GPS		67
+#define SRST_RKPWM		69
+#define SRST_CCP		71
+#define SRST_USBHOST0		72
+#define SRST_HSIC		73
+#define SRST_HSIC_AUX		74
+#define SRST_HSIC_PHY		75
+#define SRST_HSADC		76
+#define SRST_NANDC0		77
+#define SRST_NANDC1		78
+
+#define SRST_TZPC		80
+#define SRST_SPI0		83
+#define SRST_SPI1		84
+#define SRST_SPI2		85
+#define SRST_SARADC		87
+#define SRST_PDALIVE_NIU	88
+#define SRST_PDPMU_INTMEM	89
+#define SRST_PDPMU_NIU		90
+#define SRST_SGRF		91
+
+#define SRST_VIO_ARBI		96
+#define SRST_RGA_NIU		97
+#define SRST_VIO0_NIU_AXI	98
+#define SRST_VIO_NIU_AHB	99
+#define SRST_LCDC0_AXI		100
+#define SRST_LCDC0_AHB		101
+#define SRST_LCDC0_DCLK		102
+#define SRST_VIO1_NIU_AXI	103
+#define SRST_VIP		104
+#define SRST_RGA_CORE		105
+#define SRST_IEP_AXI		106
+#define SRST_IEP_AHB		107
+#define SRST_RGA_AXI		108
+#define SRST_RGA_AHB		109
+#define SRST_ISP		110
+#define SRST_EDP		111
+
+#define SRST_VCODEC_AXI		112
+#define SRST_VCODEC_AHB		113
+#define SRST_VIO_H2P		114
+#define SRST_MIPIDSI0		115
+#define SRST_MIPIDSI1		116
+#define SRST_MIPICSI		117
+#define SRST_LVDS_PHY		118
+#define SRST_LVDS_CON		119
+#define SRST_GPU		120
+#define SRST_HDMI		121
+#define SRST_CORE_PVTM		124
+#define SRST_GPU_PVTM		125
+
+#define SRST_MMC0		128
+#define SRST_SDIO0		129
+#define SRST_SDIO1		130
+#define SRST_EMMC		131
+#define SRST_USBOTG_AHB		132
+#define SRST_USBOTG_PHY		133
+#define SRST_USBOTG_CON		134
+#define SRST_USBHOST0_AHB	135
+#define SRST_USBHOST0_PHY	136
+#define SRST_USBHOST0_CON	137
+#define SRST_USBHOST1_AHB	138
+#define SRST_USBHOST1_PHY	139
+#define SRST_USBHOST1_CON	140
+#define SRST_USB_ADP		141
+#define SRST_ACC_EFUSE		142
diff --git a/include/dt-bindings/clock/s3c2410.h b/include/dt-bindings/clock/s3c2410.h
new file mode 100644
index 000000000000..352a7673fc69
--- /dev/null
+++ b/include/dt-bindings/clock/s3c2410.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2410 and later.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2410_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+
+/* id 1 is reserved */
+#define MPLL			2
+#define UPLL			3
+#define FCLK			4
+#define HCLK			5
+#define PCLK			6
+#define UCLK			7
+#define ARMCLK			8
+
+/* pclk-gates */
+#define PCLK_UART0		16
+#define PCLK_UART1		17
+#define PCLK_UART2		18
+#define PCLK_I2C		19
+#define PCLK_SDI		20
+#define PCLK_SPI		21
+#define PCLK_ADC		22
+#define PCLK_AC97		23
+#define PCLK_I2S		24
+#define PCLK_PWM		25
+#define PCLK_RTC		26
+#define PCLK_GPIO		27
+
+
+/* hclk-gates */
+#define HCLK_LCD		32
+#define HCLK_USBH		33
+#define HCLK_USBD		34
+#define HCLK_NAND		35
+#define HCLK_CAM		36
+
+
+#define CAMIF			40
+
+
+/* Total number of clocks. */
+#define NR_CLKS			(CAMIF + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */
diff --git a/include/dt-bindings/clock/s3c2412.h b/include/dt-bindings/clock/s3c2412.h
new file mode 100644
index 000000000000..aac1dcfda81c
--- /dev/null
+++ b/include/dt-bindings/clock/s3c2412.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2412.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+
+/* id 1 is reserved */
+#define MPLL			2
+#define UPLL			3
+#define MDIVCLK			4
+#define MSYSCLK			5
+#define USYSCLK			6
+#define HCLK			7
+#define PCLK			8
+#define ARMDIV			9
+#define ARMCLK			10
+
+
+/* Special clocks */
+#define SCLK_CAM		16
+#define SCLK_UART		17
+#define SCLK_I2S		18
+#define SCLK_USBD		19
+#define SCLK_USBH		20
+
+/* pclk-gates */
+#define PCLK_WDT		32
+#define PCLK_SPI		33
+#define PCLK_I2S		34
+#define PCLK_I2C		35
+#define PCLK_ADC		36
+#define PCLK_RTC		37
+#define PCLK_GPIO		38
+#define PCLK_UART2		39
+#define PCLK_UART1		40
+#define PCLK_UART0		41
+#define PCLK_SDI		42
+#define PCLK_PWM		43
+#define PCLK_USBD		44
+
+/* hclk-gates */
+#define HCLK_HALF		48
+#define HCLK_X2			49
+#define HCLK_SDRAM		50
+#define HCLK_USBH		51
+#define HCLK_LCD		52
+#define HCLK_NAND		53
+#define HCLK_DMA3		54
+#define HCLK_DMA2		55
+#define HCLK_DMA1		56
+#define HCLK_DMA0		57
+
+/* Total number of clocks. */
+#define NR_CLKS			(HCLK_DMA0 + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2412_CLOCK_H */
diff --git a/include/dt-bindings/clock/s3c2443.h b/include/dt-bindings/clock/s3c2443.h
new file mode 100644
index 000000000000..37e66b054d64
--- /dev/null
+++ b/include/dt-bindings/clock/s3c2443.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clock controllers of Samsung S3C2443 and later.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/* Core clocks. */
+#define MSYSCLK			1
+#define ESYSCLK			2
+#define ARMDIV			3
+#define ARMCLK			4
+#define HCLK			5
+#define PCLK			6
+
+/* Special clocks */
+#define SCLK_HSSPI0		16
+#define SCLK_FIMD		17
+#define SCLK_I2S0		18
+#define SCLK_I2S1		19
+#define SCLK_HSMMC1		20
+#define SCLK_HSMMC_EXT		21
+#define SCLK_CAM		22
+#define SCLK_UART		23
+#define SCLK_USBH		24
+
+/* Muxes */
+#define MUX_HSSPI0		32
+#define MUX_HSSPI1		33
+#define MUX_HSMMC0		34
+#define MUX_HSMMC1		35
+
+/* hclk-gates */
+#define HCLK_DMA0		48
+#define HCLK_DMA1		49
+#define HCLK_DMA2		50
+#define HCLK_DMA3		51
+#define HCLK_DMA4		52
+#define HCLK_DMA5		53
+#define HCLK_DMA6		54
+#define HCLK_DMA7		55
+#define HCLK_CAM		56
+#define HCLK_LCD		57
+#define HCLK_USBH		58
+#define HCLK_USBD		59
+#define HCLK_IROM		60
+#define HCLK_HSMMC0		61
+#define HCLK_HSMMC1		62
+#define HCLK_CFC		63
+#define HCLK_SSMC		64
+#define HCLK_DRAM		65
+#define HCLK_2D			66
+
+/* pclk-gates */
+#define PCLK_UART0		72
+#define PCLK_UART1		73
+#define PCLK_UART2		74
+#define PCLK_UART3		75
+#define PCLK_I2C0		76
+#define PCLK_SDI		77
+#define PCLK_SPI0		78
+#define PCLK_ADC		79
+#define PCLK_AC97		80
+#define PCLK_I2S0		81
+#define PCLK_PWM		82
+#define PCLK_WDT		83
+#define PCLK_RTC		84
+#define PCLK_GPIO		85
+#define PCLK_SPI1		86
+#define PCLK_CHIPID		87
+#define PCLK_I2C1		88
+#define PCLK_I2S1		89
+#define PCLK_PCM		90
+
+/* Total number of clocks. */
+#define NR_CLKS			(PCLK_PCM + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_S3C2443_CLOCK_H */
diff --git a/include/dt-bindings/clock/s5pv210-audss.h b/include/dt-bindings/clock/s5pv210-audss.h
new file mode 100644
index 000000000000..fe57406e24de
--- /dev/null
+++ b/include/dt-bindings/clock/s5pv210-audss.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2014 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This header provides constants for Samsung audio subsystem
+ * clock controller.
+ *
+ * The constants defined in this header are being used in dts
+ * and s5pv210 audss driver.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_S5PV210_AUDSS_H
+#define _DT_BINDINGS_CLOCK_S5PV210_AUDSS_H
+
+#define CLK_MOUT_AUDSS		0
+#define CLK_MOUT_I2S_A		1
+
+#define CLK_DOUT_AUD_BUS	2
+#define CLK_DOUT_I2S_A		3
+
+#define CLK_I2S			4
+#define CLK_HCLK_I2S		5
+#define CLK_HCLK_UART		6
+#define CLK_HCLK_HWA		7
+#define CLK_HCLK_DMA		8
+#define CLK_HCLK_BUF		9
+#define CLK_HCLK_RP		10
+
+#define AUDSS_MAX_CLKS		11
+
+#endif
diff --git a/include/dt-bindings/clock/s5pv210.h b/include/dt-bindings/clock/s5pv210.h
new file mode 100644
index 000000000000..e88986b7c677
--- /dev/null
+++ b/include/dt-bindings/clock/s5pv210.h
@@ -0,0 +1,239 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Author: Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Samsung S5PV210 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_S5PV210_H
+#define _DT_BINDINGS_CLOCK_S5PV210_H
+
+/* Core clocks. */
+#define FIN_PLL			1
+#define FOUT_APLL		2
+#define FOUT_MPLL		3
+#define FOUT_EPLL		4
+#define FOUT_VPLL		5
+
+/* Muxes. */
+#define MOUT_FLASH		6
+#define MOUT_PSYS		7
+#define MOUT_DSYS		8
+#define MOUT_MSYS		9
+#define MOUT_VPLL		10
+#define MOUT_EPLL		11
+#define MOUT_MPLL		12
+#define MOUT_APLL		13
+#define MOUT_VPLLSRC		14
+#define MOUT_CSIS		15
+#define MOUT_FIMD		16
+#define MOUT_CAM1		17
+#define MOUT_CAM0		18
+#define MOUT_DAC		19
+#define MOUT_MIXER		20
+#define MOUT_HDMI		21
+#define MOUT_G2D		22
+#define MOUT_MFC		23
+#define MOUT_G3D		24
+#define MOUT_FIMC2		25
+#define MOUT_FIMC1		26
+#define MOUT_FIMC0		27
+#define MOUT_UART3		28
+#define MOUT_UART2		29
+#define MOUT_UART1		30
+#define MOUT_UART0		31
+#define MOUT_MMC3		32
+#define MOUT_MMC2		33
+#define MOUT_MMC1		34
+#define MOUT_MMC0		35
+#define MOUT_PWM		36
+#define MOUT_SPI0		37
+#define MOUT_SPI1		38
+#define MOUT_DMC0		39
+#define MOUT_PWI		40
+#define MOUT_HPM		41
+#define MOUT_SPDIF		42
+#define MOUT_AUDIO2		43
+#define MOUT_AUDIO1		44
+#define MOUT_AUDIO0		45
+
+/* Dividers. */
+#define DOUT_PCLKP		46
+#define DOUT_HCLKP		47
+#define DOUT_PCLKD		48
+#define DOUT_HCLKD		49
+#define DOUT_PCLKM		50
+#define DOUT_HCLKM		51
+#define DOUT_A2M		52
+#define DOUT_APLL		53
+#define DOUT_CSIS		54
+#define DOUT_FIMD		55
+#define DOUT_CAM1		56
+#define DOUT_CAM0		57
+#define DOUT_TBLK		58
+#define DOUT_G2D		59
+#define DOUT_MFC		60
+#define DOUT_G3D		61
+#define DOUT_FIMC2		62
+#define DOUT_FIMC1		63
+#define DOUT_FIMC0		64
+#define DOUT_UART3		65
+#define DOUT_UART2		66
+#define DOUT_UART1		67
+#define DOUT_UART0		68
+#define DOUT_MMC3		69
+#define DOUT_MMC2		70
+#define DOUT_MMC1		71
+#define DOUT_MMC0		72
+#define DOUT_PWM		73
+#define DOUT_SPI1		74
+#define DOUT_SPI0		75
+#define DOUT_DMC0		76
+#define DOUT_PWI		77
+#define DOUT_HPM		78
+#define DOUT_COPY		79
+#define DOUT_FLASH		80
+#define DOUT_AUDIO2		81
+#define DOUT_AUDIO1		82
+#define DOUT_AUDIO0		83
+#define DOUT_DPM		84
+#define DOUT_DVSEM		85
+
+/* Gates */
+#define SCLK_FIMC		86
+#define CLK_CSIS		87
+#define CLK_ROTATOR		88
+#define CLK_FIMC2		89
+#define CLK_FIMC1		90
+#define CLK_FIMC0		91
+#define CLK_MFC			92
+#define CLK_G2D			93
+#define CLK_G3D			94
+#define CLK_IMEM		95
+#define CLK_PDMA1		96
+#define CLK_PDMA0		97
+#define CLK_MDMA		98
+#define CLK_DMC1		99
+#define CLK_DMC0		100
+#define CLK_NFCON		101
+#define CLK_SROMC		102
+#define CLK_CFCON		103
+#define CLK_NANDXL		104
+#define CLK_USB_HOST		105
+#define CLK_USB_OTG		106
+#define CLK_HDMI		107
+#define CLK_TVENC		108
+#define CLK_MIXER		109
+#define CLK_VP			110
+#define CLK_DSIM		111
+#define CLK_FIMD		112
+#define CLK_TZIC3		113
+#define CLK_TZIC2		114
+#define CLK_TZIC1		115
+#define CLK_TZIC0		116
+#define CLK_VIC3		117
+#define CLK_VIC2		118
+#define CLK_VIC1		119
+#define CLK_VIC0		120
+#define CLK_TSI			121
+#define CLK_HSMMC3		122
+#define CLK_HSMMC2		123
+#define CLK_HSMMC1		124
+#define CLK_HSMMC0		125
+#define CLK_JTAG		126
+#define CLK_MODEMIF		127
+#define CLK_CORESIGHT		128
+#define CLK_SDM			129
+#define CLK_SECSS		130
+#define CLK_PCM2		131
+#define CLK_PCM1		132
+#define CLK_PCM0		133
+#define CLK_SYSCON		134
+#define CLK_GPIO		135
+#define CLK_TSADC		136
+#define CLK_PWM			137
+#define CLK_WDT			138
+#define CLK_KEYIF		139
+#define CLK_UART3		140
+#define CLK_UART2		141
+#define CLK_UART1		142
+#define CLK_UART0		143
+#define CLK_SYSTIMER		144
+#define CLK_RTC			145
+#define CLK_SPI1		146
+#define CLK_SPI0		147
+#define CLK_I2C_HDMI_PHY	148
+#define CLK_I2C1		149
+#define CLK_I2C2		150
+#define CLK_I2C0		151
+#define CLK_I2S1		152
+#define CLK_I2S2		153
+#define CLK_I2S0		154
+#define CLK_AC97		155
+#define CLK_SPDIF		156
+#define CLK_TZPC3		157
+#define CLK_TZPC2		158
+#define CLK_TZPC1		159
+#define CLK_TZPC0		160
+#define CLK_SECKEY		161
+#define CLK_IEM_APC		162
+#define CLK_IEM_IEC		163
+#define CLK_CHIPID		164
+#define CLK_JPEG		163
+
+/* Special clocks*/
+#define SCLK_PWI		164
+#define SCLK_SPDIF		165
+#define SCLK_AUDIO2		166
+#define SCLK_AUDIO1		167
+#define SCLK_AUDIO0		168
+#define SCLK_PWM		169
+#define SCLK_SPI1		170
+#define SCLK_SPI0		171
+#define SCLK_UART3		172
+#define SCLK_UART2		173
+#define SCLK_UART1		174
+#define SCLK_UART0		175
+#define SCLK_MMC3		176
+#define SCLK_MMC2		177
+#define SCLK_MMC1		178
+#define SCLK_MMC0		179
+#define SCLK_FINVPLL		180
+#define SCLK_CSIS		181
+#define SCLK_FIMD		182
+#define SCLK_CAM1		183
+#define SCLK_CAM0		184
+#define SCLK_DAC		185
+#define SCLK_MIXER		186
+#define SCLK_HDMI		187
+#define SCLK_FIMC2		188
+#define SCLK_FIMC1		189
+#define SCLK_FIMC0		190
+#define SCLK_HDMI27M		191
+#define SCLK_HDMIPHY		192
+#define SCLK_USBPHY0		193
+#define SCLK_USBPHY1		194
+
+/* S5P6442-specific clocks */
+#define MOUT_D0SYNC		195
+#define MOUT_D1SYNC		196
+#define DOUT_MIXER		197
+#define CLK_ETB			198
+#define CLK_ETM			199
+
+/* CLKOUT */
+#define FOUT_APLL_CLKOUT	200
+#define FOUT_MPLL_CLKOUT	201
+#define DOUT_APLL_CLKOUT	202
+#define MOUT_CLKSEL		203
+#define DOUT_CLKOUT		204
+#define MOUT_CLKOUT		205
+
+/* Total number of clocks. */
+#define NR_CLKS			206
+
+#endif /* _DT_BINDINGS_CLOCK_S5PV210_H */
diff --git a/include/dt-bindings/clock/stih415-clks.h b/include/dt-bindings/clock/stih415-clks.h
new file mode 100644
index 000000000000..d80caa68aebd
--- /dev/null
+++ b/include/dt-bindings/clock/stih415-clks.h
@@ -0,0 +1,16 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH415 SoC.
+ */
+#ifndef _CLK_STIH415
+#define _CLK_STIH415
+
+/* CLOCKGEN A0 */
+#define CLK_ICN_REG		0
+#define CLK_ETH1_PHY		4
+
+/* CLOCKGEN A1 */
+#define CLK_ICN_IF_2		0
+#define CLK_GMAC0_PHY		3
+
+#endif
diff --git a/include/dt-bindings/clock/stih416-clks.h b/include/dt-bindings/clock/stih416-clks.h
new file mode 100644
index 000000000000..f9bdbd13568d
--- /dev/null
+++ b/include/dt-bindings/clock/stih416-clks.h
@@ -0,0 +1,16 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH416 SoC.
+ */
+#ifndef _CLK_STIH416
+#define _CLK_STIH416
+
+/* CLOCKGEN A0 */
+#define CLK_ICN_REG		0
+#define CLK_ETH1_PHY		4
+
+/* CLOCKGEN A1 */
+#define CLK_ICN_IF_2		0
+#define CLK_GMAC0_PHY		3
+
+#endif
diff --git a/include/dt-bindings/dma/nbpfaxi.h b/include/dt-bindings/dma/nbpfaxi.h
new file mode 100644
index 000000000000..c1a5b9e0d6a4
--- /dev/null
+++ b/include/dt-bindings/dma/nbpfaxi.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2013-2014 Renesas Electronics Europe Ltd.
+ * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef DT_BINDINGS_NBPFAXI_H
+#define DT_BINDINGS_NBPFAXI_H
+
+/**
+ * Use "#dma-cells = <2>;" with the second integer defining slave DMA flags:
+ */
+#define NBPF_SLAVE_RQ_HIGH	1
+#define NBPF_SLAVE_RQ_LOW	2
+#define NBPF_SLAVE_RQ_LEVEL	4
+
+#endif
diff --git a/include/dt-bindings/mfd/palmas.h b/include/dt-bindings/mfd/palmas.h
new file mode 100644
index 000000000000..2c8ac4841385
--- /dev/null
+++ b/include/dt-bindings/mfd/palmas.h
@@ -0,0 +1,18 @@
+/*
+ * This header provides macros for Palmas device bindings.
+ *
+ * Copyright (c) 2013, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ */
+
+#ifndef __DT_BINDINGS_PALMAS_H__
+#define __DT_BINDINGS_PALMAS_H
+
+/* External control pins */
+#define PALMAS_EXT_CONTROL_PIN_ENABLE1	1
+#define PALMAS_EXT_CONTROL_PIN_ENABLE2	2
+#define PALMAS_EXT_CONTROL_PIN_NSLEEP	3
+
+#endif /* __DT_BINDINGS_PALMAS_H */
diff --git a/include/dt-bindings/phy/phy-miphy365x.h b/include/dt-bindings/phy/phy-miphy365x.h
new file mode 100644
index 000000000000..8ef8aba6edd6
--- /dev/null
+++ b/include/dt-bindings/phy/phy-miphy365x.h
@@ -0,0 +1,14 @@
+/*
+ * This header provides constants for the phy framework
+ * based on the STMicroelectronics MiPHY365x.
+ *
+ * Author: Lee Jones <lee.jones@linaro.org>
+ */
+#ifndef _DT_BINDINGS_PHY_MIPHY
+#define _DT_BINDINGS_PHY_MIPHY
+
+#define MIPHY_TYPE_SATA		1
+#define MIPHY_TYPE_PCIE		2
+#define MIPHY_TYPE_USB		3
+
+#endif /* _DT_BINDINGS_PHY_MIPHY */
diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h b/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h
new file mode 100644
index 000000000000..914d56da9324
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h
@@ -0,0 +1,7 @@
+#ifndef _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H
+#define _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H 1
+
+#define TEGRA_XUSB_PADCTL_PCIE 0
+#define TEGRA_XUSB_PADCTL_SATA 1
+
+#endif /* _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H */
diff --git a/include/dt-bindings/reset-controller/stih415-resets.h b/include/dt-bindings/reset-controller/stih415-resets.h
new file mode 100644
index 000000000000..c2329fe29cf6
--- /dev/null
+++ b/include/dt-bindings/reset-controller/stih415-resets.h
@@ -0,0 +1,27 @@
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH415 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH415
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH415
+
+#define STIH415_EMISS_POWERDOWN		0
+#define STIH415_NAND_POWERDOWN		1
+#define STIH415_KEYSCAN_POWERDOWN	2
+#define STIH415_USB0_POWERDOWN		3
+#define STIH415_USB1_POWERDOWN		4
+#define STIH415_USB2_POWERDOWN		5
+#define STIH415_SATA0_POWERDOWN		6
+#define STIH415_SATA1_POWERDOWN		7
+#define STIH415_PCIE_POWERDOWN		8
+
+#define STIH415_ETH0_SOFTRESET		0
+#define STIH415_ETH1_SOFTRESET		1
+#define STIH415_IRB_SOFTRESET		2
+#define STIH415_USB0_SOFTRESET		3
+#define STIH415_USB1_SOFTRESET		4
+#define STIH415_USB2_SOFTRESET		5
+#define STIH415_KEYSCAN_SOFTRESET	6
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */
diff --git a/include/dt-bindings/reset-controller/stih416-resets.h b/include/dt-bindings/reset-controller/stih416-resets.h
new file mode 100644
index 000000000000..fcf9af1ac0b2
--- /dev/null
+++ b/include/dt-bindings/reset-controller/stih416-resets.h
@@ -0,0 +1,51 @@
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH416 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH416
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH416
+
+#define STIH416_EMISS_POWERDOWN		0
+#define STIH416_NAND_POWERDOWN		1
+#define STIH416_KEYSCAN_POWERDOWN	2
+#define STIH416_USB0_POWERDOWN		3
+#define STIH416_USB1_POWERDOWN		4
+#define STIH416_USB2_POWERDOWN		5
+#define STIH416_USB3_POWERDOWN		6
+#define STIH416_SATA0_POWERDOWN		7
+#define STIH416_SATA1_POWERDOWN		8
+#define STIH416_PCIE0_POWERDOWN		9
+#define STIH416_PCIE1_POWERDOWN		10
+
+#define STIH416_ETH0_SOFTRESET		0
+#define STIH416_ETH1_SOFTRESET		1
+#define STIH416_IRB_SOFTRESET		2
+#define STIH416_USB0_SOFTRESET		3
+#define STIH416_USB1_SOFTRESET		4
+#define STIH416_USB2_SOFTRESET		5
+#define STIH416_USB3_SOFTRESET		6
+#define STIH416_SATA0_SOFTRESET		7
+#define STIH416_SATA1_SOFTRESET		8
+#define STIH416_PCIE0_SOFTRESET		9
+#define STIH416_PCIE1_SOFTRESET		10
+#define STIH416_AUD_DAC_SOFTRESET	11
+#define STIH416_HDTVOUT_SOFTRESET	12
+#define STIH416_VTAC_M_RX_SOFTRESET	13
+#define STIH416_VTAC_A_RX_SOFTRESET	14
+#define STIH416_SYNC_HD_SOFTRESET	15
+#define STIH416_SYNC_SD_SOFTRESET	16
+#define STIH416_BLITTER_SOFTRESET	17
+#define STIH416_GPU_SOFTRESET		18
+#define STIH416_VTAC_M_TX_SOFTRESET	19
+#define STIH416_VTAC_A_TX_SOFTRESET	20
+#define STIH416_VTG_AUX_SOFTRESET	21
+#define STIH416_JPEG_DEC_SOFTRESET	22
+#define STIH416_HVA_SOFTRESET		23
+#define STIH416_COMPO_M_SOFTRESET	24
+#define STIH416_COMPO_A_SOFTRESET	25
+#define STIH416_VP8_DEC_SOFTRESET	26
+#define STIH416_VTG_MAIN_SOFTRESET	27
+#define STIH416_KEYSCAN_SOFTRESET	28
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH416 */
diff --git a/include/dt-bindings/reset/altr,rst-mgr.h b/include/dt-bindings/reset/altr,rst-mgr.h
new file mode 100644
index 000000000000..3f04908fb87c
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+
+/* MPUMODRST */
+#define CPU0_RESET		0
+#define CPU1_RESET		1
+#define WDS_RESET		2
+#define SCUPER_RESET		3
+#define L2_RESET		4
+
+/* PERMODRST */
+#define EMAC0_RESET		32
+#define EMAC1_RESET		33
+#define USB0_RESET		34
+#define USB1_RESET		35
+#define NAND_RESET		36
+#define QSPI_RESET		37
+#define L4WD0_RESET		38
+#define L4WD1_RESET		39
+#define OSC1TIMER0_RESET	40
+#define OSC1TIMER1_RESET	41
+#define SPTIMER0_RESET		42
+#define SPTIMER1_RESET		43
+#define I2C0_RESET		44
+#define I2C1_RESET		45
+#define I2C2_RESET		46
+#define I2C3_RESET		47
+#define UART0_RESET		48
+#define UART1_RESET		49
+#define SPIM0_RESET		50
+#define SPIM1_RESET		51
+#define SPIS0_RESET		52
+#define SPIS1_RESET		53
+#define SDMMC_RESET		54
+#define CAN0_RESET		55
+#define CAN1_RESET		56
+#define GPIO0_RESET		57
+#define GPIO1_RESET		58
+#define GPIO2_RESET		59
+#define DMA_RESET		60
+#define SDR_RESET		61
+
+/* PER2MODRST */
+#define DMAIF0_RESET		64
+#define DMAIF1_RESET		65
+#define DMAIF2_RESET		66
+#define DMAIF3_RESET		67
+#define DMAIF4_RESET		68
+#define DMAIF5_RESET		69
+#define DMAIF6_RESET		70
+#define DMAIF7_RESET		71
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET		96
+#define LWHPS2FPGA_RESET	97
+#define FPGA2HPS_RESET		98
+
+/* MISCMODRST*/
+#define ROM_RESET		128
+#define OCRAM_RESET		129
+#define SYSMGR_RESET		130
+#define SYSMGRCOLD_RESET	131
+#define FPGAMGR_RESET		132
+#define ACPIDMAP_RESET		133
+#define S2F_RESET		134
+#define S2FCOLD_RESET		135
+#define NRSTPIN_RESET		136
+#define TIMESTAMPCOLD_RESET	137
+#define CLKMGRCOLD_RESET	138
+#define SCANMGR_RESET		139
+#define FRZCTRLCOLD_RESET	140
+#define SYSDBG_RESET		141
+#define DBG_RESET		142
+#define TAPCOLD_RESET		143
+#define SDRCOLD_RESET		144
+
+#endif
diff --git a/include/dt-bindings/reset/qcom,gcc-apq8084.h b/include/dt-bindings/reset/qcom,gcc-apq8084.h
new file mode 100644
index 000000000000..527caaf48e3d
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,gcc-apq8084.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_APQ_GCC_8084_H
+#define _DT_BINDINGS_RESET_APQ_GCC_8084_H
+
+#define GCC_SYSTEM_NOC_BCR		0
+#define GCC_CONFIG_NOC_BCR		1
+#define GCC_PERIPH_NOC_BCR		2
+#define GCC_IMEM_BCR			3
+#define GCC_MMSS_BCR			4
+#define GCC_QDSS_BCR			5
+#define GCC_USB_30_BCR			6
+#define GCC_USB3_PHY_BCR		7
+#define GCC_USB_HS_HSIC_BCR		8
+#define GCC_USB_HS_BCR			9
+#define GCC_USB2A_PHY_BCR		10
+#define GCC_USB2B_PHY_BCR		11
+#define GCC_SDCC1_BCR			12
+#define GCC_SDCC2_BCR			13
+#define GCC_SDCC3_BCR			14
+#define GCC_SDCC4_BCR			15
+#define GCC_BLSP1_BCR			16
+#define GCC_BLSP1_QUP1_BCR		17
+#define GCC_BLSP1_UART1_BCR		18
+#define GCC_BLSP1_QUP2_BCR		19
+#define GCC_BLSP1_UART2_BCR		20
+#define GCC_BLSP1_QUP3_BCR		21
+#define GCC_BLSP1_UART3_BCR		22
+#define GCC_BLSP1_QUP4_BCR		23
+#define GCC_BLSP1_UART4_BCR		24
+#define GCC_BLSP1_QUP5_BCR		25
+#define GCC_BLSP1_UART5_BCR		26
+#define GCC_BLSP1_QUP6_BCR		27
+#define GCC_BLSP1_UART6_BCR		28
+#define GCC_BLSP2_BCR			29
+#define GCC_BLSP2_QUP1_BCR		30
+#define GCC_BLSP2_UART1_BCR		31
+#define GCC_BLSP2_QUP2_BCR		32
+#define GCC_BLSP2_UART2_BCR		33
+#define GCC_BLSP2_QUP3_BCR		34
+#define GCC_BLSP2_UART3_BCR		35
+#define GCC_BLSP2_QUP4_BCR		36
+#define GCC_BLSP2_UART4_BCR		37
+#define GCC_BLSP2_QUP5_BCR		38
+#define GCC_BLSP2_UART5_BCR		39
+#define GCC_BLSP2_QUP6_BCR		40
+#define GCC_BLSP2_UART6_BCR		41
+#define GCC_PDM_BCR			42
+#define GCC_PRNG_BCR			43
+#define GCC_BAM_DMA_BCR			44
+#define GCC_TSIF_BCR			45
+#define GCC_TCSR_BCR			46
+#define GCC_BOOT_ROM_BCR		47
+#define GCC_MSG_RAM_BCR			48
+#define GCC_TLMM_BCR			49
+#define GCC_MPM_BCR			50
+#define GCC_MPM_AHB_RESET		51
+#define GCC_MPM_NON_AHB_RESET		52
+#define GCC_SEC_CTRL_BCR		53
+#define GCC_SPMI_BCR			54
+#define GCC_SPDM_BCR			55
+#define GCC_CE1_BCR			56
+#define GCC_CE2_BCR			57
+#define GCC_BIMC_BCR			58
+#define GCC_SNOC_BUS_TIMEOUT0_BCR	59
+#define GCC_SNOC_BUS_TIMEOUT2_BCR	60
+#define GCC_PNOC_BUS_TIMEOUT0_BCR	61
+#define GCC_PNOC_BUS_TIMEOUT1_BCR	62
+#define GCC_PNOC_BUS_TIMEOUT2_BCR	63
+#define GCC_PNOC_BUS_TIMEOUT3_BCR	64
+#define GCC_PNOC_BUS_TIMEOUT4_BCR	65
+#define GCC_CNOC_BUS_TIMEOUT0_BCR	66
+#define GCC_CNOC_BUS_TIMEOUT1_BCR	67
+#define GCC_CNOC_BUS_TIMEOUT2_BCR	68
+#define GCC_CNOC_BUS_TIMEOUT3_BCR	69
+#define GCC_CNOC_BUS_TIMEOUT4_BCR	70
+#define GCC_CNOC_BUS_TIMEOUT5_BCR	71
+#define GCC_CNOC_BUS_TIMEOUT6_BCR	72
+#define GCC_DEHR_BCR			73
+#define GCC_RBCPR_BCR			74
+#define GCC_MSS_RESTART			75
+#define GCC_LPASS_RESTART		76
+#define GCC_WCSS_RESTART		77
+#define GCC_VENUS_RESTART		78
+#define GCC_COPSS_SMMU_BCR		79
+#define GCC_SPSS_BCR			80
+#define GCC_PCIE_0_BCR			81
+#define GCC_PCIE_0_PHY_BCR		82
+#define GCC_PCIE_1_BCR			83
+#define GCC_PCIE_1_PHY_BCR		84
+#define GCC_USB_30_SEC_BCR		85
+#define GCC_USB3_SEC_PHY_BCR		86
+#define GCC_SATA_BCR			87
+#define GCC_CE3_BCR			88
+#define GCC_UFS_BCR			89
+#define GCC_USB30_PHY_COM_BCR		90
+
+#endif
diff --git a/include/dt-bindings/reset/qcom,gcc-ipq806x.h b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
new file mode 100644
index 000000000000..0ad5ef930b5d
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_IPQ_806X_H
+#define _DT_BINDINGS_RESET_IPQ_806X_H
+
+#define QDSS_STM_RESET					0
+#define AFAB_SMPSS_S_RESET				1
+#define AFAB_SMPSS_M1_RESET				2
+#define AFAB_SMPSS_M0_RESET				3
+#define AFAB_EBI1_CH0_RESET				4
+#define AFAB_EBI1_CH1_RESET				5
+#define SFAB_ADM0_M0_RESET				6
+#define SFAB_ADM0_M1_RESET				7
+#define SFAB_ADM0_M2_RESET				8
+#define ADM0_C2_RESET					9
+#define ADM0_C1_RESET					10
+#define ADM0_C0_RESET					11
+#define ADM0_PBUS_RESET					12
+#define ADM0_RESET					13
+#define QDSS_CLKS_SW_RESET				14
+#define QDSS_POR_RESET					15
+#define QDSS_TSCTR_RESET				16
+#define QDSS_HRESET_RESET				17
+#define QDSS_AXI_RESET					18
+#define QDSS_DBG_RESET					19
+#define SFAB_PCIE_M_RESET				20
+#define SFAB_PCIE_S_RESET				21
+#define PCIE_EXT_RESET					22
+#define PCIE_PHY_RESET					23
+#define PCIE_PCI_RESET					24
+#define PCIE_POR_RESET					25
+#define PCIE_HCLK_RESET					26
+#define PCIE_ACLK_RESET					27
+#define SFAB_LPASS_RESET				28
+#define SFAB_AFAB_M_RESET				29
+#define AFAB_SFAB_M0_RESET				30
+#define AFAB_SFAB_M1_RESET				31
+#define SFAB_SATA_S_RESET				32
+#define SFAB_DFAB_M_RESET				33
+#define DFAB_SFAB_M_RESET				34
+#define DFAB_SWAY0_RESET				35
+#define DFAB_SWAY1_RESET				36
+#define DFAB_ARB0_RESET					37
+#define DFAB_ARB1_RESET					38
+#define PPSS_PROC_RESET					39
+#define PPSS_RESET					40
+#define DMA_BAM_RESET					41
+#define SPS_TIC_H_RESET					42
+#define SFAB_CFPB_M_RESET				43
+#define SFAB_CFPB_S_RESET				44
+#define TSIF_H_RESET					45
+#define CE1_H_RESET					46
+#define CE1_CORE_RESET					47
+#define CE1_SLEEP_RESET					48
+#define CE2_H_RESET					49
+#define CE2_CORE_RESET					50
+#define SFAB_SFPB_M_RESET				51
+#define SFAB_SFPB_S_RESET				52
+#define RPM_PROC_RESET					53
+#define PMIC_SSBI2_RESET				54
+#define SDC1_RESET					55
+#define SDC2_RESET					56
+#define SDC3_RESET					57
+#define SDC4_RESET					58
+#define USB_HS1_RESET					59
+#define USB_HSIC_RESET					60
+#define USB_FS1_XCVR_RESET				61
+#define USB_FS1_RESET					62
+#define GSBI1_RESET					63
+#define GSBI2_RESET					64
+#define GSBI3_RESET					65
+#define GSBI4_RESET					66
+#define GSBI5_RESET					67
+#define GSBI6_RESET					68
+#define GSBI7_RESET					69
+#define SPDM_RESET					70
+#define SEC_CTRL_RESET					71
+#define TLMM_H_RESET					72
+#define SFAB_SATA_M_RESET				73
+#define SATA_RESET					74
+#define TSSC_RESET					75
+#define PDM_RESET					76
+#define MPM_H_RESET					77
+#define MPM_RESET					78
+#define SFAB_SMPSS_S_RESET				79
+#define PRNG_RESET					80
+#define SFAB_CE3_M_RESET				81
+#define SFAB_CE3_S_RESET				82
+#define CE3_SLEEP_RESET					83
+#define PCIE_1_M_RESET					84
+#define PCIE_1_S_RESET					85
+#define PCIE_1_EXT_RESET				86
+#define PCIE_1_PHY_RESET				87
+#define PCIE_1_PCI_RESET				88
+#define PCIE_1_POR_RESET				89
+#define PCIE_1_HCLK_RESET				90
+#define PCIE_1_ACLK_RESET				91
+#define PCIE_2_M_RESET					92
+#define PCIE_2_S_RESET					93
+#define PCIE_2_EXT_RESET				94
+#define PCIE_2_PHY_RESET				95
+#define PCIE_2_PCI_RESET				96
+#define PCIE_2_POR_RESET				97
+#define PCIE_2_HCLK_RESET				98
+#define PCIE_2_ACLK_RESET				99
+#define SFAB_USB30_S_RESET				100
+#define SFAB_USB30_M_RESET				101
+#define USB30_0_PORT2_HS_PHY_RESET			102
+#define USB30_0_MASTER_RESET				103
+#define USB30_0_SLEEP_RESET				104
+#define USB30_0_UTMI_PHY_RESET				105
+#define USB30_0_POWERON_RESET				106
+#define USB30_0_PHY_RESET				107
+#define USB30_1_MASTER_RESET				108
+#define USB30_1_SLEEP_RESET				109
+#define USB30_1_UTMI_PHY_RESET				110
+#define USB30_1_POWERON_RESET				111
+#define USB30_1_PHY_RESET				112
+#define NSSFB0_RESET					113
+#define NSSFB1_RESET					114
+#endif
diff --git a/include/dt-bindings/reset/qcom,mmcc-apq8084.h b/include/dt-bindings/reset/qcom,mmcc-apq8084.h
new file mode 100644
index 000000000000..c1671396531d
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,mmcc-apq8084.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_APQ_MMCC_8084_H
+#define _DT_BINDINGS_RESET_APQ_MMCC_8084_H
+
+#define MMSS_SPDM_RESET			0
+#define MMSS_SPDM_RM_RESET		1
+#define VENUS0_RESET			2
+#define VPU_RESET			3
+#define MDSS_RESET			4
+#define AVSYNC_RESET			5
+#define CAMSS_PHY0_RESET		6
+#define CAMSS_PHY1_RESET		7
+#define CAMSS_PHY2_RESET		8
+#define CAMSS_CSI0_RESET		9
+#define CAMSS_CSI0PHY_RESET		10
+#define CAMSS_CSI0RDI_RESET		11
+#define CAMSS_CSI0PIX_RESET		12
+#define CAMSS_CSI1_RESET		13
+#define CAMSS_CSI1PHY_RESET		14
+#define CAMSS_CSI1RDI_RESET		15
+#define CAMSS_CSI1PIX_RESET		16
+#define CAMSS_CSI2_RESET		17
+#define CAMSS_CSI2PHY_RESET		18
+#define CAMSS_CSI2RDI_RESET		19
+#define CAMSS_CSI2PIX_RESET		20
+#define CAMSS_CSI3_RESET		21
+#define CAMSS_CSI3PHY_RESET		22
+#define CAMSS_CSI3RDI_RESET		23
+#define CAMSS_CSI3PIX_RESET		24
+#define CAMSS_ISPIF_RESET		25
+#define CAMSS_CCI_RESET			26
+#define CAMSS_MCLK0_RESET		27
+#define CAMSS_MCLK1_RESET		28
+#define CAMSS_MCLK2_RESET		29
+#define CAMSS_MCLK3_RESET		30
+#define CAMSS_GP0_RESET			31
+#define CAMSS_GP1_RESET			32
+#define CAMSS_TOP_RESET			33
+#define CAMSS_AHB_RESET			34
+#define CAMSS_MICRO_RESET		35
+#define CAMSS_JPEG_RESET		36
+#define CAMSS_VFE_RESET			37
+#define CAMSS_CSI_VFE0_RESET		38
+#define CAMSS_CSI_VFE1_RESET		39
+#define OXILI_RESET			40
+#define OXILICX_RESET			41
+#define OCMEMCX_RESET			42
+#define MMSS_RBCRP_RESET		43
+#define MMSSNOCAHB_RESET		44
+#define MMSSNOCAXI_RESET		45
+
+#endif
diff --git a/include/dt-bindings/soc/qcom,gsbi.h b/include/dt-bindings/soc/qcom,gsbi.h
new file mode 100644
index 000000000000..7ac4292333aa
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,gsbi.h
@@ -0,0 +1,26 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_QCOM_GSBI_H
+#define __DT_BINDINGS_QCOM_GSBI_H
+
+#define GSBI_PROT_IDLE		0
+#define GSBI_PROT_I2C_UIM	1
+#define GSBI_PROT_I2C		2
+#define GSBI_PROT_SPI		3
+#define GSBI_PROT_UART_W_FC	4
+#define GSBI_PROT_UIM		5
+#define GSBI_PROT_I2C_UART	6
+
+#define GSBI_CRCI_QUP		0
+#define GSBI_CRCI_UART		1
+
+#endif
diff --git a/include/dt-bindings/sound/tlv320aic31xx-micbias.h b/include/dt-bindings/sound/tlv320aic31xx-micbias.h
new file mode 100644
index 000000000000..f5cb772ab9c8
--- /dev/null
+++ b/include/dt-bindings/sound/tlv320aic31xx-micbias.h
@@ -0,0 +1,8 @@
+#ifndef __DT_TLV320AIC31XX_MICBIAS_H
+#define __DT_TLV320AIC31XX_MICBIAS_H
+
+#define MICBIAS_2_0V		1
+#define MICBIAS_2_5V		2
+#define MICBIAS_AVDDV		3
+
+#endif /* __DT_TLV320AIC31XX_MICBIAS_H */
diff --git a/include/dt-bindings/spmi/spmi.h b/include/dt-bindings/spmi/spmi.h
new file mode 100644
index 000000000000..d11e1e543871
--- /dev/null
+++ b/include/dt-bindings/spmi/spmi.h
@@ -0,0 +1,18 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_SPMI_H
+#define __DT_BINDINGS_SPMI_H
+
+#define SPMI_USID	0
+#define SPMI_GSID	1
+
+#endif
diff --git a/src/arm/am335x-pepper.dts b/src/arm/am335x-pepper.dts
new file mode 100644
index 000000000000..0d35ab64641c
--- /dev/null
+++ b/src/arm/am335x-pepper.dts
@@ -0,0 +1,653 @@
+/*
+ * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "am33xx.dtsi"
+
+/ {
+	model = "Gumstix Pepper";
+	compatible = "gumstix,am335x-pepper", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc3_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	buttons: user_buttons {
+		compatible = "gpio-keys";
+	};
+
+	leds: user_leds {
+		compatible = "gpio-leds";
+	};
+
+	panel: lcd_panel {
+		compatible = "ti,tilcdc,panel";
+	};
+
+	sound: sound_iface {
+		compatible = "ti,da830-evm-audio";
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+	};
+
+	v3v3c_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+	};
+
+	vdd5_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+	};
+};
+
+/* I2C Busses */
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "at,24c256";
+		reg = <0x50>;
+	};
+
+	audio_codec: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+	};
+
+	accel: lis331dlh@1d {
+		compatible = "st,lis3lv02d";
+		reg = <0x1d>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0 {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+	i2c1_pins: pinmux_i2c1 {
+		pinctrl-single,pins = <
+			0x10C (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
+		>;
+	};
+};
+
+/* Accelerometer */
+&accel {
+	pinctrl-names = "default";
+	pinctrl-0 = <&accel_pins>;
+
+	Vdd-supply = <&ldo3_reg>;
+	Vdd_IO-supply = <&ldo3_reg>;
+	st,irq1-click;
+	st,wakeup-x-lo;
+	st,wakeup-x-hi;
+	st,wakeup-y-lo;
+	st,wakeup-y-hi;
+	st,wakeup-z-lo;
+	st,wakeup-z-hi;
+	st,min-limit-x = <92>;
+	st,max-limit-x = <14>;
+	st,min-limit-y = <14>;
+	st,max-limit-y = <92>;
+	st,min-limit-z = <92>;
+	st,max-limit-z = <14>;
+};
+
+&am33xx_pinmux {
+	accel_pins: pinmux_accel {
+		pinctrl-single,pins = <
+			0x98 (PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
+		>;
+	};
+};
+
+/* Audio */
+&audio_codec {
+	status = "okay";
+
+	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	AVDD-supply = <&ldo3_reg>;
+	IOVDD-supply = <&ldo3_reg>;
+	DRVDD-supply = <&ldo3_reg>;
+	DVDD-supply = <&dcdc1_reg>;
+};
+
+&sound {
+	ti,model = "AM335x-EVM";
+	ti,audio-codec = <&audio_codec>;
+	ti,mcasp-controller = <&mcasp0>;
+	ti,codec-clock-rate = <12000000>;
+	ti,audio-routing =
+		"Headphone Jack",	"HPLOUT",
+		"Headphone Jack",	"HPROUT",
+		"LINE1L",		"Line In";
+};
+
+&mcasp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+
+	op-mode = <0>;	/* MCASP_ISS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		1 2 0 0
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
+
+&am33xx_pinmux {
+	audio_pins: pinmux_audio {
+		pinctrl-single,pins = <
+			0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
+			0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
+			0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
+			0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
+			0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
+			0x40 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+		>;
+	};
+};
+
+/* Display: 24-bit LCD Screen */
+&panel {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+	panel-info {
+		ac-bias = <255>;
+		ac-bias-intrpt = <0>;
+		dma-burst-sz = <16>;
+		bpp = <32>;
+		fdd = <0x80>;
+		sync-edge = <0>;
+		sync-ctrl = <1>;
+		raster-order = <0>;
+		fifo-th = <0>;
+	};
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 480x272 {
+			clock-frequency = <18400000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vfront-porch = <4>;
+			vback-porch = <2>;
+			vsync-len = <10>;
+			hsync-active = <1>;
+			vsync-active = <1>;
+		};
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	lcd_pins: pinmux_lcd {
+		pinctrl-single,pins = <
+			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
+			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
+			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
+			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
+			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
+			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
+			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
+			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			/* Display Enable */
+			0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+};
+
+/* Ethernet */
+&cpsw_emac0 {
+	status = "okay";
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&cpsw_emac1 {
+	status = "okay";
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+};
+
+&davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+};
+
+
+&am33xx_pinmux {
+	ethernet_pins: pinmux_ethernet {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
+			0x13c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			/* ethernet interrupt */
+			0x144 (PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
+			/* ethernet PHY nReset */
+			0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
+		>;
+	};
+
+	mdio_pins: pinmux_mdio {
+		pinctrl-single,pins = <
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+};
+
+/* MMC */
+&mmc1 {
+	/* Bootable SD card slot */
+	status = "okay";
+	vmmc-supply = <&ldo3_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc2 {
+	/* eMMC (not populated) on MMC #2 */
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&ldo3_reg>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&edma {
+	/* Map eDMA MMC2 Events from Crossbar */
+	ti,edma-xbar-event-map = /bits/ 16 <1 12
+                                            2 13>;
+};
+
+
+&mmc3 {
+	/* Wifi & Bluetooth on MMC #3 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wireless_pins>;
+	vmmmc-supply = <&v3v3c_reg>;
+	bus-width = <4>;
+	ti,non-removable;
+	dmas = <&edma 12
+		&edma 13>;
+	dma-names = "tx", "rx";
+};
+
+
+&am33xx_pinmux {
+	sd_pins: pinmux_sd_card {
+		pinctrl-single,pins = <
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			0x160 (PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+		>;
+	};
+	emmc_pins: pinmux_emmc {
+		pinctrl-single,pins = <
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+			/* EMMC nReset */
+			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+		>;
+	};
+	wireless_pins: pinmux_wireless {
+		pinctrl-single,pins = <
+			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
+			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
+			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
+			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
+			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
+			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
+			/* WLAN nReset */
+			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			/* WLAN nPower down */
+			0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			/* 32kHz Clock */
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+};
+
+/* Power */
+&vbat {
+	regulator-name = "vbat";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+};
+
+&v3v3c_reg {
+	regulator-name = "v3v3c_reg";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	vin-supply = <&vbat>;
+};
+
+&vdd5_reg {
+	regulator-name = "vdd5_reg";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	vin-supply = <&vbat>;
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	backlight {
+		isel = <1>; /* ISET1 */
+		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
+		default-brightness = <80>;
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* VDD_1V8 system supply */
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* VRTC 1.8V always-on supply */
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* 3.3V rail */
+		};
+
+		ldo3_reg: regulator@5 {
+			/* VDD_3V3A 3.3V rail */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* VDD_3V3B 3.3V rail */
+		};
+	};
+};
+
+/* SPI Busses */
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+};
+
+&am33xx_pinmux {
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+			0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+			0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+			0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+		>;
+	};
+};
+
+/* Touch Screen */
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+/* UARTs */
+&uart0 {
+	/* Serial Console */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+	/* Broken out to J6 header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+	uart1_pins: pinmux_uart1 {
+		pinctrl-single,pins = <
+			0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
+			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+		>;
+	};
+};
+
+/* USB */
+&usb {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_pins>;
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+        dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+        dr_mode = "host";
+};
+
+&cppi41dma {
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	usb_pins: pinmux_usb {
+		pinctrl-single,pins = <
+			/* USB0 Over-Current (active low) */
+			0x64 (PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			/* USB1 Over-Current (active low) */
+			0x68 (PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+		>;
+	};
+};
+
+/* User IO */
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_leds_pins>;
+
+	led@0 {
+		label = "pepper:user0:blue";
+		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		linux,default-trigger = "none";
+		default-state = "off";
+	};
+
+	led@1 {
+		label = "pepper:user1:red";
+		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		linux,default-trigger = "none";
+		default-state = "off";
+	};
+};
+
+&buttons {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_buttons_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	button@0 {
+		label = "home";
+		linux,code = <KEY_HOME>;
+		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+		gpio-key,wakeup;
+	};
+
+	button@1 {
+		label = "menu";
+		linux,code = <KEY_MENU>;
+		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		gpio-key,wakeup;
+	};
+
+	buttons@2 {
+		label = "power";
+		linux,code = <KEY_POWER>;
+		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		gpio-key,wakeup;
+	};
+};
+
+&am33xx_pinmux {
+	user_leds_pins: pinmux_user_leds {
+		pinctrl-single,pins = <
+			0x50 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+			0x54 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+		>;
+	};
+
+	user_buttons_pins: pinmux_user_buttons {
+		pinctrl-single,pins = <
+			0x58 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x5C (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
+			0x164 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
+		>;
+	};
+};
diff --git a/src/arm/am3517-craneboard.dts b/src/arm/am3517-craneboard.dts
new file mode 100644
index 000000000000..2d40b3f241cd
--- /dev/null
+++ b/src/arm/am3517-craneboard.dts
@@ -0,0 +1,174 @@
+/*
+ * See craneboard.org for more details
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+
+/ {
+	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
+	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&davinci_emac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&vdd2_reg>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&mmc3 {
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+	tps_pins: pinmux_tps_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+};
+
+&tps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tps_pins>;
+
+	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	interrupt-parent = <&intc>;
+
+	ti,en-ck32k-xtal;
+
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		/*
+		 * Unused:
+		 * VDIG1=2.7V,300mA max
+		 * VDIG2=1.8V,300mA max
+		 */
+
+		vpll_reg: regulator@7 {
+			/* VDDS_DPLL_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			/* VDDS_SRAM_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			/* VDDA1P8V_USBPHY */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		/* VAUX33 unused */
+
+		vdac_reg: regulator@8 {
+			/* VDDA_DAC_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			/* VDDA3P3V_USBPHY */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_CORE */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDDSHV_3V3 */
+			regulator-name = "vdd_shv";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		/* VDD3 unused */
+	};
+};
diff --git a/src/arm/am437x-gp-evm.dts b/src/arm/am437x-gp-evm.dts
new file mode 100644
index 000000000000..646a6eade788
--- /dev/null
+++ b/src/arm/am437x-gp-evm.dts
@@ -0,0 +1,515 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x GP EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TI AM437x GP EVM";
+	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
+				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
+				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
+
+		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
+				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
+
+		linux,keymap = <0x00000201      /* P1 */
+				0x00010202      /* P2 */
+				0x01000067      /* UP */
+				0x0101006a      /* RIGHT */
+				0x02000069      /* LEFT */
+				0x0201006c>;      /* DOWN */
+		};
+
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+&am43xx_pinmux {
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	pixcir_ts_pins: pixcir_ts_pins {
+		pinctrl-single,pins = <
+			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
+			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			/* GPIO 5_8 to select LCD / HDMI */
+			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	tps65218: tps65218@24 {
+		reg = <0x24>;
+		compatible = "ti,tps65218";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdcdc3";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+
+		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		reg = <0 0 4>;		/* device IO registers */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <25>;
+		gpmc,adv-wr-off-ns = <25>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <3>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-pin = <0>;
+		gpmc,wait-on-read;
+		gpmc,wait-on-write;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000c0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002c0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/src/arm/am437x-sk-evm.dts b/src/arm/am437x-sk-evm.dts
new file mode 100644
index 000000000000..859ff3d620ee
--- /dev/null
+++ b/src/arm/am437x-sk-evm.dts
@@ -0,0 +1,613 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x SK EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TI AM437x SK EVM";
+	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM437x-SK-EVM";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <24000000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT";
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&matrix_keypad_pins>;
+
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <1500>;
+
+		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
+				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
+
+		col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH		/* Bank5, pin13 */
+				&gpio5 4 GPIO_ACTIVE_HIGH>;	/* Bank5, pin4 */
+
+		linux,keymap = <
+				MATRIX_KEY(0, 0, KEY_DOWN)
+				MATRIX_KEY(0, 1, KEY_RIGHT)
+				MATRIX_KEY(1, 0, KEY_LEFT)
+				MATRIX_KEY(1, 1, KEY_UP)
+			>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		led@0 {
+			label = "am437x-sk:red:heartbeat";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "am437x-sk:green:mmc1";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "am437x-sk:blue:cpu0";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "am437x-sk:blue:usr3";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
+			default-state = "off";
+		};
+	};
+
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <43>;
+			hsync-len = <4>;
+			vback-porch = <12>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+&am43xx_pinmux {
+	matrix_keypad_pins: matrix_keypad_pins {
+		pinctrl-single,pins = <
+			0x24c (PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
+			0x250 (PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
+			0x254 (PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
+			0x258 (PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
+		>;
+	};
+
+	leds_pins: leds_pins {
+		pinctrl-single,pins = <
+			0x228 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
+			0x22c (PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
+			0x230 (PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
+			0x234 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+		>;
+	};
+
+	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
+		pinctrl-single,pins = <
+			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+
+			/* Slave 2 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value */
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS PCLK */
+			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS AC BIAS EN */
+
+		>;
+	};
+
+	qspi_pins: qspi_pins {
+		pinctrl-single,pins = <
+			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
+			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			/* GPIO 5_8 to select LCD / HDMI */
+			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	tps@24 {
+		compatible = "ti,tps65218";
+		reg = <0x24>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			/* VDD_CORE limits min of OPP50 and max of OPP100 */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdds_ddr";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc4: regulator-dcdc4 {
+			compatible = "ti,tps65218-dcdc4";
+			regulator-name = "v3_3d";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-name = "v1_8d";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+	};
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	edt-ft5306@38 {
+		status = "okay";
+		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5306_ts_pins>;
+
+		reg = <0x38>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <31 0>;
+
+		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&dcdc4>;
+		IOVDD-supply = <&dcdc4>;
+		DRVDD-supply = <&dcdc4>;
+		DVDD-supply = <&ldo1>;
+	};
+
+	lis331dlh@18 {
+		compatible = "st,lis331dlh";
+		reg = <0x18>;
+		status = "okay";
+
+		Vdd-supply = <&dcdc4>;
+		Vdd_IO-supply = <&dcdc4>;
+		interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	vmmc-supply = <&dcdc4>;
+	bus-width = <4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first 512KiB
+		 * for a valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <4>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <5>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&mcasp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp1_pins>;
+
+	status = "okay";
+
+	op-mode = <0>;
+	tdm-slots = <2>;
+	serial-dir = <
+		0 0 1 2
+	>;
+
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm/armada-375-db.dts b/src/arm/armada-375-db.dts
new file mode 100644
index 000000000000..929ae00b4063
--- /dev/null
+++ b/src/arm/armada-375-db.dts
@@ -0,0 +1,170 @@
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+	model = "Marvell Armada 375 Development Board";
+	compatible = "marvell,a375-db", "marvell,armada375";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+				/*
+				 * SPI conflicts with NAND, so we disable it
+				 * here, and select NAND as the enabled device
+				 * by default.
+				 */
+				status = "disabled";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			pinctrl {
+				sdio_st_pins: sdio-st-pins {
+					marvell,pins = "mpp44", "mpp45";
+					marvell,function = "gpio";
+				};
+			};
+
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+
+			nand: nand@d0000 {
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+
+			usb@54000 {
+				status = "okay";
+			};
+
+			usb3@58000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+			};
+
+			ethernet@f0000 {
+				status = "okay";
+
+				eth0@c4000 {
+					status = "okay";
+					phy = <&phy0>;
+					phy-mode = "rgmii-id";
+				};
+
+				eth1@c5000 {
+					status = "okay";
+					phy = <&phy3>;
+					phy-mode = "gmii";
+				};
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-375.dtsi b/src/arm/armada-375.dtsi
new file mode 100644
index 000000000000..c1e49e7bf0fa
--- /dev/null
+++ b/src/arm/armada-375.dtsi
@@ -0,0 +1,553 @@
+/*
+ * Device Tree Include file for Marvell Armada 375 family SoC
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 375 family SoC";
+	compatible = "marvell,armada375";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-375-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0xc0054 0x4>;
+				clocks = <&gateclk 19>;
+			};
+
+			/* Network controller */
+			ethernet@f0000 {
+				compatible = "marvell,armada-375-pp2";
+				reg = <0xf0000 0xa000>, /* Packet Processor regs */
+				      <0xc0000 0x3060>, /* LMS regs */
+				      <0xc4000 0x100>,  /* eth0 regs */
+				      <0xc5000 0x100>;  /* eth1 regs */
+				clocks = <&gateclk 3>, <&gateclk 19>;
+				clock-names = "pp_clk", "gop_clk";
+				status = "disabled";
+
+				eth0: eth0@c4000 {
+					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <0>;
+					status = "disabled";
+				};
+
+				eth1: eth1@c5000 {
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <1>;
+					status = "disabled";
+				};
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl {
+				compatible = "marvell,mv88f6720-pinctrl";
+				reg = <0x18000 0x24>;
+
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp14",  "mpp15";
+					marvell,function = "i2c0";
+				};
+
+				i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp61",  "mpp62";
+					marvell,function = "i2c1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp0", "mpp1", "mpp2",
+						"mpp3", "mpp4", "mpp5",
+						"mpp6", "mpp7", "mpp8",
+						"mpp9", "mpp10", "mpp11",
+						"mpp12", "mpp13";
+					marvell,function = "nand";
+				};
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp24",  "mpp25", "mpp26",
+						     "mpp27", "mpp28", "mpp29";
+					marvell,function = "sd";
+				};
+
+				spi0_pins: spi0-pins {
+					marvell,pins = "mpp0",  "mpp1", "mpp4",
+						     "mpp5", "mpp8", "mpp9";
+					marvell,function = "spi0";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-375-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-375-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 0>;
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-375-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
+				clocks = <&coreclk 0>;
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-375-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				status = "disabled";
+			};
+
+			usb@54000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x54000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			usb3@58000 {
+				compatible = "marvell,armada-375-xhci";
+				reg = <0x58000 0x20000>,<0x5b880 0x80>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 16>;
+				status = "disabled";
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 23>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			sata@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 14>, <&gateclk 20>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada375-thermal";
+				reg = <0xe8078 0x4>, <0xe807c 0x8>;
+				status = "okay";
+			};
+
+			coreclk: mvebu-sar@e8204 {
+				compatible = "marvell,armada-375-core-clock";
+				reg = <0xe8204 0x04>;
+				#clock-cells = <1>;
+			};
+
+			coredivclk: corediv-clock@e8250 {
+				compatible = "marvell,armada-375-corediv-clock";
+				reg = <0xe8250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
diff --git a/src/arm/armada-380.dtsi b/src/arm/armada-380.dtsi
new file mode 100644
index 000000000000..4173a8ab34e7
--- /dev/null
+++ b/src/arm/armada-380.dtsi
@@ -0,0 +1,119 @@
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 380 family SoC";
+	compatible = "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv88f6810-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
+
+			/* x1 port */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-385-db.dts b/src/arm/armada-385-db.dts
new file mode 100644
index 000000000000..1af886f1e486
--- /dev/null
+++ b/src/arm/armada-385-db.dts
@@ -0,0 +1,151 @@
+/*
+ * Device Tree file for Marvell Armada 385 evaluation board
+ * (DB-88F6820)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Development Board";
+	compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "w25q32";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "ok";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+
+			sdhci@d8000 {
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-385-rd.dts b/src/arm/armada-385-rd.dts
new file mode 100644
index 000000000000..aaca2861dc87
--- /dev/null
+++ b/src/arm/armada-385-rd.dts
@@ -0,0 +1,97 @@
+/*
+ * Device Tree file for Marvell Armada 385 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Reference Design";
+	compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-385.dtsi b/src/arm/armada-385.dtsi
new file mode 100644
index 000000000000..6283d7912f71
--- /dev/null
+++ b/src/arm/armada-385.dtsi
@@ -0,0 +1,151 @@
+/*
+ * Device Tree Include file for Marvell Armada 385 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 385 family SoC";
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl {
+				compatible = "marvell,mv88f6820-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-38x.dtsi b/src/arm/armada-38x.dtsi
new file mode 100644
index 000000000000..242d0ecc99f3
--- /dev/null
+++ b/src/arm/armada-38x.dtsi
@@ -0,0 +1,466 @@
+/*
+ * Device Tree Include file for Marvell Armada 38x family of SoCs.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 38x family SoC";
+	compatible = "marvell,armada380";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		eth0 = &eth0;
+		eth1 = &eth1;
+		eth2 = &eth2;
+	};
+
+	soc {
+		compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+		};
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl {
+				compatible = "marvell,mv88f6820-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-380-system-controller",
+					     "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-380-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18600 {
+				compatible = "marvell,armada-380-core-clock";
+				reg = <0x18600 0x04>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-380-timer",
+					     "marvell,armada-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			pmsu@22000 {
+				compatible = "marvell,armada-380-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			eth1: ethernet@30000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x30000 0x4000>;
+				interrupts-extended = <&mpic 10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			eth2: ethernet@34000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x34000 0x4000>;
+				interrupts-extended = <&mpic 12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x58000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				status = "disabled";
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts-extended = <&mpic 8>;
+				clocks = <&gateclk 4>;
+				status = "disabled";
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+			coredivclk: clock@e4250 {
+				compatible = "marvell,armada-380-corediv-clock";
+				reg = <0xe4250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				status = "okay";
+			};
+
+			flash@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdhci@d8000 {
+				compatible = "marvell,armada-380-sdhci";
+				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+				interrupts = <0 25 0x4>;
+				clocks = <&gateclk 17>;
+				mrvl,clk-delay-cycles = <0x1F>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			usb3@f8000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+		};
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/src/arm/armada-xp-lenovo-ix4-300d.dts b/src/arm/armada-xp-lenovo-ix4-300d.dts
new file mode 100644
index 000000000000..469cf7137595
--- /dev/null
+++ b/src/arm/armada-xp-lenovo-ix4-300d.dts
@@ -0,0 +1,284 @@
+/*
+ * Device Tree file for Lenovo Iomega ix4-300d
+ *
+ * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Lenovo Iomega ix4-300d";
+	compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = "/soc/internal-regs/serial@12000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Quad port sata: Marvell 88SX7042 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* USB 3.0 xHCI controller: NEC D720200F1 */
+			pcie@5,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			pinctrl {
+				poweroff_pin: poweroff-pin {
+					marvell,pins = "mpp24";
+					marvell,function = "gpio";
+				};
+
+				power_button_pin: power-button-pin {
+					marvell,pins = "mpp44";
+					marvell,function = "gpio";
+				};
+
+				reset_button_pin: reset-button-pin {
+					marvell,pins = "mpp45";
+					marvell,function = "gpio";
+				};
+				select_button_pin: select-button-pin {
+					marvell,pins = "mpp41";
+					marvell,function = "gpio";
+				};
+
+				scroll_button_pin: scroll-button-pin {
+					marvell,pins = "mpp42";
+					marvell,function = "gpio";
+				};
+
+				hdd_led_pin: hdd-led-pin {
+					marvell,pins = "mpp26";
+					marvell,function = "gpio";
+				};
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				adt7473@2e {
+					compatible = "adi,adt7473";
+					reg = <0x2e>;
+				};
+
+				pcf8563@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0000000 0xe0000>;
+					read-only;
+				};
+
+				partition@e0000 {
+					label = "u-boot-env";
+					reg = <0xe0000 0x20000>;
+					read-only;
+				};
+
+				partition@100000 {
+					label = "u-boot-env2";
+					reg = <0x100000 0x20000>;
+					read-only;
+				};
+
+				partition@120000 {
+					label = "zImage";
+					reg = <0x120000 0x400000>;
+				};
+
+				partition@520000 {
+					label = "initrd";
+					reg = <0x520000 0x400000>;
+				};
+
+				partition@xE00000 {
+					label = "boot";
+					reg = <0xE00000 0x3F200000>;
+				};
+
+				partition@flash {
+					label = "flash";
+					reg = <0x0 0x40000000>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin
+			&select_button_pin &scroll_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		select-button {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		scroll-button {
+			label = "Scroll Button";
+			linux,code = <KEY_SCROLLDOWN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi3 {
+		compatible = "spi-gpio";
+		status = "okay";
+		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
+		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <2>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&hdd_led_pin>;
+		pinctrl-names = "default";
+
+		hdd-led {
+			label = "ix4-300d:hdd:blue";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power-led {
+			label = "ix4-300d:power:white";
+			gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
+			/* init blinking while booting */
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		sysfail-led {
+			label = "ix4-300d:sysfail:red";
+			gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		sys-led {
+			label = "ix4-300d:sys:blue";
+			gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		hddfail-led {
+			label = "ix4-300d:hddfail:red";
+			gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+	};
+
+	/*
+	 * Warning: you need both eth1 & 0 PHY initialized (i.e having
+	 * them up does the tweak) for poweroff to shutdown otherwise it
+	 * reboots
+	 */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff_pin>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/src/arm/at91sam9261.dtsi b/src/arm/at91sam9261.dtsi
new file mode 100644
index 000000000000..a81aab4281a7
--- /dev/null
+++ b/src/arm/at91sam9261.dtsi
@@ -0,0 +1,853 @@
+/*
+ * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	model = "Atmel AT91SAM9261 family SoC";
+	compatible = "atmel,at91sam9261";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>;
+			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		fb0: fb@0x00600000 {
+			compatible = "atmel,at91sam9261-lcdc";
+			reg = <0x00600000 0x1000>;
+			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&hclk1>;
+			clock-names = "lcdc_clk", "hclk";
+			status = "disabled";
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>;
+			atmel,nand-addr-offset = <22>;
+			atmel,nand-cmd-offset = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+
+			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>,
+				<&pioC 14 GPIO_ACTIVE_HIGH>,
+				<0>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk";
+			};
+
+			usb1: gadget@fffa4000 {
+				compatible = "atmel,at91rm9200-udc";
+				reg = <0xfffa4000 0x4000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&usb>, <&udc_clk>, <&udpck>;
+				clock-names = "usb_clk", "udc_clk", "udpck";
+				status = "disabled";
+			};
+
+			mmc0: mmc@fffa8000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa8000 0x600>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffac000 {
+				compatible = "atmel,at91sam9261-i2c";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c_twi>;
+				reg = <0xfffac000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000{
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				clocks = <&ssc0_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				clocks = <&ssc1_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			ssc2: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				clocks = <&ssc2_clk>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffc8000 0x200>;
+				cs-gpios = <0>, <0>, <0>, <0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi1: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			ramc: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9260-bus-matrix";
+				reg = <0xffffee00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x600>;
+
+				atmel,mux-mask =
+				      /*    A         B     */
+				      <0xffffffff 0xfffffff7>,  /* pioA */
+				      <0xffffffff 0xfffffff4>,  /* pioB */
+				      <0xffffffff 0xffffff07>;  /* pioC */
+
+				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+					};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					};
+
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c_bitbang: i2c-0-bitbang {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_i2c_twi: i2c-0-twi {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioA_clk>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioB_clk>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioC_clk>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91rm9200-pmc";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					clocks = <&main_osc>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+								<190000000 240000000 2 1>;
+				};
+
+				pllb: pllbck {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+					clocks = <&main>;
+					reg = <1>;
+					atmel,clk-input-range = <1000000 5000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+					atmel,clk-output-range = <0 94000000>;
+					atmel,clk-divisors = <1 2 4 0>;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91rm9200-clk-usb";
+					#clock-cells = <0>;
+					atmel,clk-divisors = <1 2 4 0>;
+					clocks = <&pllb>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91rm9200-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+
+					prog3: prog3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						interrupts = <AT91_PMC_PCKRDY(3)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+
+					pck3: pck3 {
+						#clock-cells = <0>;
+						reg = <11>;
+						clocks = <&prog3>;
+					};
+
+					hclk0: hclk0 {
+						#clock-cells = <0>;
+						reg = <16>;
+						clocks = <&mck>;
+					};
+
+					hclk1: hclk1 {
+						#clock-cells = <0>;
+						reg = <17>;
+						clocks = <&mck>;
+					};
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioA_clk: pioA_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioB_clk: pioB_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					pioC_clk: pioC_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					udc_clk: udc_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <11>;
+						#clock-cells = <0>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					ssc1_clk: ssc1_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					ssc2_clk: ssc2_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tc0_clk: tc0_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					tc1_clk: tc1_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					tc2_clk: tc2_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					ohci_clk: ohci_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					lcd_clk: lcd_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+				};
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_bitbang>;
+		gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/at91sam9261ek.dts b/src/arm/at91sam9261ek.dts
new file mode 100644
index 000000000000..f4a765729c7a
--- /dev/null
+++ b/src/arm/at91sam9261ek.dts
@@ -0,0 +1,219 @@
+/*
+ * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
+ *
+ *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+/dts-v1/;
+#include "at91sam9261.dtsi"
+
+/ {
+	model = "Atmel at91sam9261ek";
+	compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		usb0: ohci@00500000 {
+			status = "okay";
+		};
+
+		fb0: fb@0x00600000 {
+			display = <&display0>;
+			atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "BRG";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		apb {
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
+				status = "okay";
+
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					reg = <0>;
+					spi-max-frequency = <15000000>;
+				};
+
+				tsc2046@0 {
+					reg = <2>;
+					compatible = "ti,ads7843";
+					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
+					spi-max-frequency = <3000000>;
+					pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+					ti,x-min = /bits/ 16 <150>;
+					ti,x-max = /bits/ 16 <3830>;
+					ti,y-min = /bits/ 16 <190>;
+					ti,y-max = /bits/ 16 <3830>;
+					ti,vref-delay-usecs = /bits/ 16 <450>;
+					ti,x-plate-ohms = /bits/ 16 <450>;
+					ti,y-plate-ohms = /bits/ 16 <250>;
+					ti,pressure-max = /bits/ 16 <15000>;
+					ti,debounce-rep = /bits/ 16 <0>;
+					ti,debounce-tol = /bits/ 16 <65535>;
+					ti,debounce-max = /bits/ 16 <1>;
+
+					linux,wakeup;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds8 {
+			label = "ds8";
+			gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		ds7 {
+			label = "ds7";
+			gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button_0 {
+			label = "button_0";
+			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			gpio-key,wakeup;
+		};
+
+		button_1 {
+			label = "button_1";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <257>;
+			gpio-key,wakeup;
+		};
+
+		button_2 {
+			label = "button_2";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			linux,code = <258>;
+			gpio-key,wakeup;
+		};
+
+		button_3 {
+			label = "button_3";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <259>;
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/src/arm/at91sam9rl.dtsi b/src/arm/at91sam9rl.dtsi
new file mode 100644
index 000000000000..ab56c8b81dfa
--- /dev/null
+++ b/src/arm/at91sam9rl.dtsi
@@ -0,0 +1,1092 @@
+/*
+ * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
+ *
+ *  Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Atmel AT91SAM9RL family SoC";
+	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		pwm0 = &pwm0;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x04000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fb0: fb@00500000 {
+			compatible = "atmel,at91sam9rl-lcdc";
+			reg = <0x00500000 0x1000>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&lcd_clk>;
+			clock-names = "hclk", "lcdc_clk";
+			status = "disabled";
+		};
+
+		nand0: nand@40000000 {
+			compatible = "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x40000000 0x10000000>,
+			      <0xffffe800 0x200>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>,
+				<&pioB 6 GPIO_ACTIVE_HIGH>,
+				<0>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk";
+			};
+
+			mmc0: mmc@fffa4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffa4000 0x600>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@fffa8000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffa8000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@fffac000 {
+				compatible = "atmel,at91sam9260-i2c";
+				reg = <0xfffac000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			usart0: serial@fffb0000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb0000 0x200>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@fffb4000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb4000 0x200>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart2: serial@fffb8000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffb8000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fffbc000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffbc000 0x200>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffc0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc0000 0x4000>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
+			ssc1: ssc@fffc4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffc4000 0x4000>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@fffc8000 {
+				compatible = "atmel,at91sam9rl-pwm";
+				reg = <0xfffc8000 0x300>;
+				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+				#pwm-cells = <3>;
+				clocks = <&pwm_clk>;
+				clock-names = "pwm_clk";
+				status = "disabled";
+			};
+
+			spi0: spi@fffcc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfffcc000 0x200>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			adc0: adc@fffd0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9rl-adc";
+				reg = <0xfffd0000 0x100>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&adc_clk>, <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-use-external-triggers;
+				atmel,adc-channels-used = <0x3f>;
+				atmel,adc-vref = <3300>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-use-res = "highres";
+
+				trigger@0 {
+					reg = <0>;
+					trigger-name = "timer-counter-0";
+					trigger-value = <0x1>;
+				};
+				trigger@1 {
+					reg = <1>;
+					trigger-name = "timer-counter-1";
+					trigger-value = <0x3>;
+				};
+
+				trigger@2 {
+					reg = <2>;
+					trigger-name = "timer-counter-2";
+					trigger-value = <0x5>;
+				};
+
+				trigger@3 {
+					reg = <3>;
+					trigger-name = "external";
+					trigger-value = <0x13>;
+					trigger-external;
+				};
+			};
+
+			usb0: gadget@fffd4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91sam9rl-udc";
+				reg = <0x00600000 0x100000>,
+				      <0xfffd4000 0x4000>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+				clocks = <&udphs_clk>, <&utmi>;
+				clock-names = "pclk", "hclk";
+				status = "disabled";
+
+				ep0 {
+					reg = <0>;
+					atmel,fifo-size = <64>;
+					atmel,nb-banks = <1>;
+				};
+
+				ep1 {
+					reg = <1>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep2 {
+					reg = <2>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <2>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep3 {
+					reg = <3>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep4 {
+					reg = <4>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+				};
+
+				ep5 {
+					reg = <5>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+
+				ep6 {
+					reg = <6>;
+					atmel,fifo-size = <1024>;
+					atmel,nb-banks = <3>;
+					atmel,can-dma;
+					atmel,can-isoc;
+				};
+			};
+
+			dma0: dma-controller@ffffe600 {
+				compatible = "atmel,at91sam9rl-dma";
+				reg = <0xffffe600 0x200>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <2>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <31>;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&mck>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfffff400 0xfffff400 0x800>;
+
+				atmel,mux-mask =
+					/*    A         B     */
+					<0xffffffff 0xe05c6738>,  /* pioA */
+					<0xffffffff 0x0000c780>,  /* pioB */
+					<0xffffffff 0xe3ffff0e>,  /* pioC */
+					<0x003fffff 0x0001ff3c>;  /* pioD */
+
+				/* shared pinctrl settings */
+				adc0 {
+					pinctrl_adc0_ts: adc0_ts-0 {
+						atmel,pins =
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad0: adc0_ad0-0 {
+						atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad1: adc0_ad1-0 {
+						atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad2: adc0_ad2-0 {
+						atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad3: adc0_ad3-0 {
+						atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad4: adc0_ad4-0 {
+						atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_ad5: adc0_ad5-0 {
+						atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_adc0_adtrg: adc0_adtrg-0 {
+						atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				fb {
+					pinctrl_fb: fb-0 {
+						atmel,pins =
+							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				i2c_gpio1 {
+					pinctrl_i2c_gpio1: i2c_gpio1-0 {
+						atmel,pins =
+							<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+							<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+				};
+
+				nand {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand0_ale_cle: nand_ale_cle-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand0_oe_we: nand_oe_we-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand0_cs: nand_cs-0 {
+						atmel,pins =
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
+						atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				tcb0 {
+					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+						atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+						atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+						atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+						atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+						atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+						atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+						atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_dcd: usart0_dcd-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_ri: usart0_ri-0 {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins =
+							<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_rts: usart3_rts-0 {
+						atmel,pins =
+							<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_cts: usart3_cts-0 {
+						atmel,pins =
+							<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+
+				pioA: gpio@fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioA_clk>;
+				};
+
+				pioB: gpio@fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioB_clk>;
+				};
+
+				pioC: gpio@fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioC_clk>;
+				};
+
+				pioD: gpio@fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioD_clk>;
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g45-pmc";
+				reg = <0xfffffc00 0x100>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main: mainck {
+					compatible = "atmel,at91rm9200-clk-main";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,at91rm9200-clk-pll";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <1000000 32000000>;
+					#atmel,pll-clk-output-range-cells = <3>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0>,
+								<190000000 240000000 2>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91rm9200-clk-master";
+					#clock-cells = <0>;
+					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
+					atmel,clk-output-range = <0 94000000>;
+					atmel,clk-divisors = <1 2 4 0>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91rm9200-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+				};
+
+				periphck {
+					compatible = "atmel,at91rm9200-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					pioA_clk: pioA_clk {
+						#clock-cells = <0>;
+						reg = <2>;
+					};
+
+					pioB_clk: pioB_clk {
+						#clock-cells = <0>;
+						reg = <3>;
+					};
+
+					pioC_clk: pioC_clk {
+						#clock-cells = <0>;
+						reg = <4>;
+					};
+
+					pioD_clk: pioD_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					usart3_clk: usart3_clk {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					twi0_clk: twi0_clk {
+						#clock-cells = <0>;
+						reg = <11>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					ssc1_clk: ssc1_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					tc0_clk: tc0_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					tc1_clk: tc1_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					tc2_clk: tc2_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <20>;
+					};
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <21>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					lcd_clk: lcd_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+				};
+			};
+
+			rstc@fffffd00 {
+				compatible = "atmel,at91sam9260-rstc";
+				reg = <0xfffffd00 0x10>;
+			};
+
+			shdwc@fffffd10 {
+				compatible = "atmel,at91sam9260-shdwc";
+				reg = <0xfffffd10 0x10>;
+			};
+
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&mck>;
+			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
+			sckc@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <1200000>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <75>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
+		status = "disabled";
+	};
+
+	i2c@1 {
+		compatible = "i2c-gpio";
+		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
+			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,sda-open-drain;
+		i2c-gpio,scl-open-drain;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio1>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/at91sam9rlek.dts b/src/arm/at91sam9rlek.dts
new file mode 100644
index 000000000000..9be5b540eebf
--- /dev/null
+++ b/src/arm/at91sam9rlek.dts
@@ -0,0 +1,247 @@
+/*
+ * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
+ *
+ *  Copyright (C) 2014  Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9rl.dtsi"
+
+/ {
+	model = "Atmel at91sam9rlek";
+	compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		fb0: fb@00500000 {
+			display = <&display0>;
+			status = "okay";
+
+			display0: display {
+				bits-per-pixel = <16>;
+				atmel,lcdcon-backlight;
+				atmel,dmacon = <0x1>;
+				atmel,lcdcon2 = <0x80008002>;
+				atmel,guard-time = <1>;
+				atmel,lcd-wiring-mode = "RGB";
+
+				display-timings {
+					native-mode = <&timing0>;
+					timing0: timing0 {
+						clock-frequency = <4965000>;
+						hactive = <240>;
+						vactive = <320>;
+						hback-porch = <1>;
+						hfront-porch = <33>;
+						vback-porch = <1>;
+						vfront-porch = <0>;
+						hsync-len = <5>;
+						vsync-len = <1>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt = <1>;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		apb {
+			mmc0: mmc@fffa4000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot0_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 = <
+					&pinctrl_usart0
+					&pinctrl_usart0_rts
+					&pinctrl_usart0_cts>;
+				status = "okay";
+			};
+
+			adc0: adc@fffd0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_adtrg>;
+				atmel,adc-ts-wires = <4>;
+				status = "okay";
+			};
+
+			usb0: gadget@fffd4000 {
+				atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			spi0: spi@fffcc000 {
+				status = "okay";
+				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
+				mtd_dataflash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			pwm0: pwm@fffc8000 {
+				status = "okay";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm1_2>,
+					<&pinctrl_pwm0_pwm2_2>;
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				main: mainck {
+					clock-frequency = <12000000>;
+				};
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		ds1 {
+			label = "ds1";
+			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+
+		ds2 {
+			label = "ds2";
+			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds3 {
+			label = "ds3";
+			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+			linux,code = <273>;
+			gpio-key,wakeup;
+		};
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+			linux,code = <272>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+	};
+
+	i2c@1 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/at91sam9x5_can.dtsi b/src/arm/at91sam9x5_can.dtsi
new file mode 100644
index 000000000000..f44ab7702a12
--- /dev/null
+++ b/src/arm/at91sam9x5_can.dtsi
@@ -0,0 +1,31 @@
+/*
+ * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * Ethernet interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+                                        can1_clk: can1_clk {
+                                                #clock-cells = <0>;
+                                                reg = <30>;
+                                        };
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/at91sam9x5_isi.dtsi b/src/arm/at91sam9x5_isi.dtsi
new file mode 100644
index 000000000000..98bc877a68ef
--- /dev/null
+++ b/src/arm/at91sam9x5_isi.dtsi
@@ -0,0 +1,26 @@
+/*
+ * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * Image Sensor Interface.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					isi_clk: isi_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/at91sam9x5_lcd.dtsi b/src/arm/at91sam9x5_lcd.dtsi
new file mode 100644
index 000000000000..485302e8233d
--- /dev/null
+++ b/src/arm/at91sam9x5_lcd.dtsi
@@ -0,0 +1,26 @@
+/*
+ * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
+ * LCD controller.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					lcdc_clk: lcdc_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/axm5516-amarillo.dts b/src/arm/axm5516-amarillo.dts
new file mode 100644
index 000000000000..a9d60471d9ff
--- /dev/null
+++ b/src/arm/axm5516-amarillo.dts
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/boot/dts/axm5516-amarillo.dts
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+#include "axm55xx.dtsi"
+#include "axm5516-cpus.dtsi"
+
+/ {
+	model = "Amarillo AXM5516";
+	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0x02 0x00000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/src/arm/axm5516-cpus.dtsi b/src/arm/axm5516-cpus.dtsi
new file mode 100644
index 000000000000..b85f360cb125
--- /dev/null
+++ b/src/arm/axm5516-cpus.dtsi
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/boot/dts/axm5516-cpus.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x00>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x01>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x02>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x03>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+	};
+};
diff --git a/src/arm/axm55xx.dtsi b/src/arm/axm55xx.dtsi
new file mode 100644
index 000000000000..ea288f0a1d39
--- /dev/null
+++ b/src/arm/axm55xx.dtsi
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/boot/dts/axm55xx.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/lsi,axm5516-clks.h>
+
+#include "skeleton64.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0	  = &serial0;
+		serial1   = &serial1;
+		serial2	  = &serial2;
+		serial3	  = &serial3;
+		timer	  = &timer0;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clk_ref0: clk_ref0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref1: clk_ref1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref2: clk_ref2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clks: clock-controller@2010020000 {
+			compatible = "lsi,axm5516-clks";
+			#clock-cells = <1>;
+			reg = <0x20 0x10020000 0 0x20000>;
+		};
+	};
+
+	gic: interrupt-controller@2001001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x20 0x01001000 0 0x1000>,
+		      <0x20 0x01002000 0 0x1000>,
+		      <0x20 0x01004000 0 0x2000>,
+		      <0x20 0x01006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		device_type = "soc";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		syscon: syscon@2010030000 {
+			compatible = "lsi,axxia-syscon", "syscon";
+			reg = <0x20 0x10030000 0 0x2000>;
+		};
+
+		reset: reset@2010031000 {
+			compatible = "lsi,axm55xx-reset";
+			syscon = <&syscon>;
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			serial0: uart@2010080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10080000 0 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial1: uart@2010081000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10081000 0 0x1000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial2: uart@2010082000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10082000 0 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial3: uart@2010083000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10083000 0 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			timer0: timer@2010091000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x20 0x10091000 0 0x1000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "okay";
+			};
+
+			gpio0: gpio@2010092000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10092000 0x00 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			gpio1: gpio@2010093000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10093000 0x00 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
+
+/*
+  Local Variables:
+  mode: C
+  End:
+*/
diff --git a/src/arm/bcm21664-garnet.dts b/src/arm/bcm21664-garnet.dts
new file mode 100644
index 000000000000..e87cb26ddf84
--- /dev/null
+++ b/src/arm/bcm21664-garnet.dts
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm21664.dtsi"
+
+/ {
+	model = "BCM21664 Garnet board";
+	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
+
+	memory {
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	uart@3e000000 {
+		status = "okay";
+	};
+
+	sdio1: sdio@3f180000 {
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio2: sdio@3f190000 {
+		non-removable;
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		max-frequency = <48000000>;
+		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	usbotg: usb@3f120000 {
+		status = "okay";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/bcm21664.dtsi b/src/arm/bcm21664.dtsi
new file mode 100644
index 000000000000..2016b72a8fb7
--- /dev/null
+++ b/src/arm/bcm21664.dtsi
@@ -0,0 +1,357 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "dt-bindings/clock/bcm21664.h"
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "BCM21664 SoC";
+	compatible = "brcm,bcm21664";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+       cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm11351-cpu-method";
+		secondary-boot-reg = <0x35004178>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@0x3404e000 {
+		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uart@3e000000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e000000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e001000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	brcm,resetmgr@35001f00 {
+		compatible = "brcm,bcm21664-resetmgr";
+		reg = <0x35001f00 0x24>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1c>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x524>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: sdio@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x801c>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+		status = "disabled";
+	};
+
+	sdio2: sdio@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x801c>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+		status = "disabled";
+	};
+
+	sdio3: sdio@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x801c>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+		status = "disabled";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x801c>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+		status = "disabled";
+	};
+
+	i2c@3e016000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x70>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+		status = "disabled";
+	};
+
+	i2c@3e017000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x70>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+		status = "disabled";
+	};
+
+	i2c@3e018000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x70>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+		status = "disabled";
+	};
+
+	i2c@3e01c000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e01c000 0x70>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu {
+			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu {
+			compatible = BCM21664_DT_AON_CCU_COMPAT;
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		master_ccu: master_ccu {
+			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+
+		slave_ccu: slave_ccu {
+			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/bcm4708-netgear-r6250.dts b/src/arm/bcm4708-netgear-r6250.dts
new file mode 100644
index 000000000000..3b5259de5a38
--- /dev/null
+++ b/src/arm/bcm4708-netgear-r6250.dts
@@ -0,0 +1,35 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for Netgear R6250 V1
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "netgear,r6250v1", "brcm,bcm4708";
+	model = "Netgear R6250 V1 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chipcommonA {
+		uart0: serial@0300 {
+			status = "okay";
+		};
+
+		uart1: serial@0400 {
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/bcm4708.dtsi b/src/arm/bcm4708.dtsi
new file mode 100644
index 000000000000..31141e83fedd
--- /dev/null
+++ b/src/arm/bcm4708.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM4708 SoC.
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm4708";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+};
diff --git a/src/arm/bcm5301x.dtsi b/src/arm/bcm5301x.dtsi
new file mode 100644
index 000000000000..53c624f766b4
--- /dev/null
+++ b/src/arm/bcm5301x.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chipcommonA {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@0300 {
+			compatible = "ns16550";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart1: serial@0400 {
+			compatible = "ns16550";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19020000 0x00003000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x0000 0x100>;
+		};
+
+		timer@0200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x0200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_periph>;
+		};
+
+		local-timer@0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x0600 0x100>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_periph>;
+		};
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x0100 0x100>;
+		};
+
+		L2: cache-controller@2000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x2000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* As long as we do not have a real clock driver us this
+		 * fixed clock */
+		clk_periph: periph {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+};
diff --git a/src/arm/bcm59056.dtsi b/src/arm/bcm59056.dtsi
new file mode 100644
index 000000000000..066adfb10bd5
--- /dev/null
+++ b/src/arm/bcm59056.dtsi
@@ -0,0 +1,95 @@
+/*
+* Copyright 2014 Linaro Limited
+* Author: Matt Porter <mporter@linaro.org>
+*
+* This program is free software; you can redistribute it and/or modify it
+* under  the terms of the GNU General  Public License as published by the
+* Free Software Foundation;  either version 2 of the License, or (at your
+* option) any later version.
+*/
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	regulators {
+		rfldo_reg: rfldo {
+		};
+
+		camldo1_reg: camldo1 {
+		};
+
+		camldo2_reg: camldo2 {
+		};
+
+		simldo1_reg: simldo1 {
+		};
+
+		simldo2_reg: simldo2 {
+		};
+
+		sdldo_reg: sdldo {
+		};
+
+		sdxldo_reg: sdxldo {
+		};
+
+		mmcldo1_reg: mmcldo1 {
+		};
+
+		mmcldo2_reg: mmcldo2 {
+		};
+
+		audldo_reg: audldo {
+		};
+
+		micldo_reg: micldo {
+		};
+
+		usbldo_reg: usbldo {
+		};
+
+		vibldo_reg: vibldo {
+		};
+
+		csr_reg: csr {
+		};
+
+		iosr1_reg: iosr1 {
+		};
+
+		iosr2_reg: iosr2 {
+		};
+
+		msr_reg: msr {
+		};
+
+		sdsr1_reg: sdsr1 {
+		};
+
+		sdsr2_reg: sdsr2 {
+		};
+
+		vsr_reg: vsr {
+		};
+
+		gpldo1_reg: gpldo1 {
+		};
+
+		gpldo2_reg: gpldo2 {
+		};
+
+		gpldo3_reg: gpldo3 {
+		};
+
+		gpldo4_reg: gpldo4 {
+		};
+
+		gpldo5_reg: gpldo5 {
+		};
+
+		gpldo6_reg: gpldo6 {
+		};
+
+		vbus_reg: vbus {
+		};
+	};
+};
diff --git a/src/arm/bcm7445-bcm97445svmb.dts b/src/arm/bcm7445-bcm97445svmb.dts
new file mode 100644
index 000000000000..9eec2ac1112f
--- /dev/null
+++ b/src/arm/bcm7445-bcm97445svmb.dts
@@ -0,0 +1,14 @@
+/dts-v1/;
+#include "bcm7445.dtsi"
+
+/ {
+	model = "Broadcom STB (bcm7445), SVMB reference board";
+	compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00 0x00000000 0x00 0x40000000>,
+		      <0x00 0x40000000 0x00 0x40000000>,
+		      <0x00 0x80000000 0x00 0x40000000>;
+	};
+};
diff --git a/src/arm/bcm7445.dtsi b/src/arm/bcm7445.dtsi
new file mode 100644
index 000000000000..0ca0f4e523d0
--- /dev/null
+++ b/src/arm/bcm7445.dtsi
@@ -0,0 +1,111 @@
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Broadcom STB (bcm7445)";
+	compatible = "brcm,bcm7445", "brcm,brcmstb";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <3>;
+		};
+	};
+
+	gic: interrupt-controller@ffd00000 {
+		compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
+		reg = <0x00 0xffd01000 0x00 0x1000>,
+		      <0x00 0xffd02000 0x00 0x2000>,
+		      <0x00 0xffd04000 0x00 0x2000>,
+		      <0x00 0xffd06000 0x00 0x2000>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	rdb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0x00 0xf0000000 0x1000000>;
+
+		serial@40ab00 {
+			compatible = "ns16550a";
+			reg = <0x40ab00 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0x4d3f640>;
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7445-sun-top-ctrl",
+				     "syscon";
+			reg = <0x404000 0x51c>;
+		};
+
+		hif_cpubiuctrl: syscon@3e2400 {
+			compatible = "brcm,bcm7445-hif-cpubiuctrl",
+				     "syscon";
+			reg = <0x3e2400 0x5b4>;
+		};
+
+		hif_continuation: syscon@452000 {
+			compatible = "brcm,bcm7445-hif-continuation",
+				     "syscon";
+			reg = <0x452000 0x100>;
+		};
+	};
+
+	smpboot {
+		compatible = "brcm,brcmstb-smpboot";
+		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+		syscon-cont = <&hif_continuation>;
+	};
+
+	reboot {
+		compatible = "brcm,brcmstb-reboot";
+		syscon = <&sun_top_ctrl 0x304 0x308>;
+	};
+};
diff --git a/src/arm/berlin2q-marvell-dmp.dts b/src/arm/berlin2q-marvell-dmp.dts
new file mode 100644
index 000000000000..a357ce02a64e
--- /dev/null
+++ b/src/arm/berlin2q-marvell-dmp.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "berlin2q.dtsi"
+
+/ {
+	model = "Marvell BG2-Q DMP";
+	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+
+	choosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+};
+
+&sdhci1 {
+	broken-cd;
+	sdhci,wp-inverted;
+	status = "okay";
+};
+
+&sdhci2 {
+	non-removable;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/berlin2q.dtsi b/src/arm/berlin2q.dtsi
new file mode 100644
index 000000000000..400c40fceccc
--- /dev/null
+++ b/src/arm/berlin2q.dtsi
@@ -0,0 +1,443 @@
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/berlin2q.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
+	compatible = "marvell,berlin2q", "marvell,berlin";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,berlin-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <3>;
+		};
+	};
+
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0 0xf7000000 0x1000000>;
+		interrupt-parent = <&gic>;
+
+		sdhci0: sdhci@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			status = "disabled";
+		};
+
+		l2: l2-cache-controller@ac0000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xac0000 0x1000>;
+			cache-level = <2>;
+			arm,data-latency = <2 2 2>;
+			arm,tag-latency = <2 2 2>;
+		};
+
+		scu: snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
+		local-timer@ad0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xad0600 0x20>;
+			clocks = <&chip CLKID_TWD>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@ad1000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xad1000 0x1000>, <0xad0100 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		cpu-ctrl@dd0000 {
+			compatible = "marvell,berlin-cpu-ctrl";
+			reg = <0xdd0000 0x10000>;
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			i2c0: i2c@1400 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1400 0x100>;
+				interrupt-parent = <&aic>;
+				interrupts = <4>;
+				clocks = <&chip CLKID_CFG>;
+				pinctrl-0 = <&twsi0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c1: i2c@1800 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1800 0x100>;
+				interrupt-parent = <&aic>;
+				interrupts = <5>;
+				clocks = <&chip CLKID_CFG>;
+				pinctrl-0 = <&twsi1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			timer0: timer@2c00 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c00 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				interrupts = <8>;
+			};
+
+			timer1: timer@2c14 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c14 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer2: timer@2c28 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c28 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer3: timer@2c3c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c3c 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer4: timer@2c50 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c50 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer5: timer@2c64 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c64 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer6: timer@2c78 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c78 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer7: timer@2c8c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c8c 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@3800 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3800 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio4: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			gpio5: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+		};
+
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2q-chip-ctrl";
+			#clock-cells = <1>;
+			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+
+			twsi0_pmux: twsi0-pmux {
+				groups = "G6";
+				function = "twsi0";
+			};
+
+			twsi1_pmux: twsi1-pmux {
+				groups = "G7";
+				function = "twsi1";
+			};
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			i2c2: i2c@7000 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x7000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <6>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&twsi2_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c3: i2c@8000 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x8000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <7>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&twsi3_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart0: uart@9000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x9000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <8>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart1: uart@a000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xa000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <9>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sysctrl: pin-controller@d000 {
+				compatible = "marvell,berlin2q-system-ctrl";
+				reg = <0xd000 0x100>;
+
+				uart0_pmux: uart0-pmux {
+					groups = "GSM12";
+					function = "uart0";
+				};
+
+				uart1_pmux: uart1-pmux {
+					groups = "GSM14";
+					function = "uart1";
+				};
+
+				twsi2_pmux: twsi2-pmux {
+					groups = "GSM13";
+					function = "twsi2";
+				};
+
+				twsi3_pmux: twsi3-pmux {
+					groups = "GSM14";
+					function = "twsi3";
+				};
+			};
+
+			sic: interrupt-controller@e000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0xe000 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/src/arm/cros-ec-keyboard.dtsi b/src/arm/cros-ec-keyboard.dtsi
new file mode 100644
index 000000000000..9c7fb0acae79
--- /dev/null
+++ b/src/arm/cros-ec-keyboard.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Keyboard dts fragment for devices that use cros-ec-keyboard
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/input/input.h>
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb";
+		keypad,num-rows = <8>;
+		keypad,num-columns = <13>;
+		google,needs-ghost-filter;
+
+		linux,keymap = <
+			MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+			MATRIX_KEY(0x00, 0x02, KEY_F1)
+			MATRIX_KEY(0x00, 0x03, KEY_B)
+			MATRIX_KEY(0x00, 0x04, KEY_F10)
+			MATRIX_KEY(0x00, 0x06, KEY_N)
+			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+			MATRIX_KEY(0x01, 0x01, KEY_ESC)
+			MATRIX_KEY(0x01, 0x02, KEY_F4)
+			MATRIX_KEY(0x01, 0x03, KEY_G)
+			MATRIX_KEY(0x01, 0x04, KEY_F7)
+			MATRIX_KEY(0x01, 0x06, KEY_H)
+			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+			MATRIX_KEY(0x01, 0x09, KEY_F9)
+			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+
+			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+			MATRIX_KEY(0x02, 0x01, KEY_TAB)
+			MATRIX_KEY(0x02, 0x02, KEY_F3)
+			MATRIX_KEY(0x02, 0x03, KEY_T)
+			MATRIX_KEY(0x02, 0x04, KEY_F6)
+			MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+			MATRIX_KEY(0x02, 0x06, KEY_Y)
+			MATRIX_KEY(0x02, 0x07, KEY_102ND)
+			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+			MATRIX_KEY(0x02, 0x09, KEY_F8)
+
+			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+			MATRIX_KEY(0x03, 0x02, KEY_F2)
+			MATRIX_KEY(0x03, 0x03, KEY_5)
+			MATRIX_KEY(0x03, 0x04, KEY_F5)
+			MATRIX_KEY(0x03, 0x06, KEY_6)
+			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+
+			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+			MATRIX_KEY(0x04, 0x01, KEY_A)
+			MATRIX_KEY(0x04, 0x02, KEY_D)
+			MATRIX_KEY(0x04, 0x03, KEY_F)
+			MATRIX_KEY(0x04, 0x04, KEY_S)
+			MATRIX_KEY(0x04, 0x05, KEY_K)
+			MATRIX_KEY(0x04, 0x06, KEY_J)
+			MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+			MATRIX_KEY(0x04, 0x09, KEY_L)
+			MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+			MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+			MATRIX_KEY(0x05, 0x01, KEY_Z)
+			MATRIX_KEY(0x05, 0x02, KEY_C)
+			MATRIX_KEY(0x05, 0x03, KEY_V)
+			MATRIX_KEY(0x05, 0x04, KEY_X)
+			MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+			MATRIX_KEY(0x05, 0x06, KEY_M)
+			MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+			MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+			MATRIX_KEY(0x05, 0x09, KEY_DOT)
+			MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+			MATRIX_KEY(0x06, 0x01, KEY_1)
+			MATRIX_KEY(0x06, 0x02, KEY_3)
+			MATRIX_KEY(0x06, 0x03, KEY_4)
+			MATRIX_KEY(0x06, 0x04, KEY_2)
+			MATRIX_KEY(0x06, 0x05, KEY_8)
+			MATRIX_KEY(0x06, 0x06, KEY_7)
+			MATRIX_KEY(0x06, 0x08, KEY_0)
+			MATRIX_KEY(0x06, 0x09, KEY_9)
+			MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+			MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+			MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+			MATRIX_KEY(0x07, 0x01, KEY_Q)
+			MATRIX_KEY(0x07, 0x02, KEY_E)
+			MATRIX_KEY(0x07, 0x03, KEY_R)
+			MATRIX_KEY(0x07, 0x04, KEY_W)
+			MATRIX_KEY(0x07, 0x05, KEY_I)
+			MATRIX_KEY(0x07, 0x06, KEY_U)
+			MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+			MATRIX_KEY(0x07, 0x08, KEY_P)
+			MATRIX_KEY(0x07, 0x09, KEY_O)
+			MATRIX_KEY(0x07, 0x0b, KEY_UP)
+			MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+		>;
+	};
+};
diff --git a/src/arm/dove-cubox-es.dts b/src/arm/dove-cubox-es.dts
new file mode 100644
index 000000000000..e28ef056dd17
--- /dev/null
+++ b/src/arm/dove-cubox-es.dts
@@ -0,0 +1,12 @@
+#include "dove-cubox.dts"
+
+/ {
+	model = "SolidRun CuBox (Engineering Sample)";
+	compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
+};
+
+&sdio0 {
+	/* sdio0 card detect is connected to wrong pin on CuBox ES */
+	cd-gpios = <&gpio0 12 1>;
+	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
+};
diff --git a/src/arm/dra72-evm.dts b/src/arm/dra72-evm.dts
new file mode 100644
index 000000000000..514702348818
--- /dev/null
+++ b/src/arm/dra72-evm.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+
+/ {
+	model = "TI DRA722";
+	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1024 MB */
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/src/arm/dra72x.dtsi b/src/arm/dra72x.dtsi
new file mode 100644
index 000000000000..f1ec22f6ebf4
--- /dev/null
+++ b/src/arm/dra72x.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+	};
+};
diff --git a/src/arm/dra74x.dtsi b/src/arm/dra74x.dtsi
new file mode 100644
index 000000000000..a4e8bb9f95c0
--- /dev/null
+++ b/src/arm/dra74x.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+};
diff --git a/src/arm/exynos3250-pinctrl.dtsi b/src/arm/exynos3250-pinctrl.dtsi
new file mode 100644
index 000000000000..47b92c150f4e
--- /dev/null
+++ b/src/arm/exynos3250-pinctrl.dtsi
@@ -0,0 +1,475 @@
+/*
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <0x2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	mipi0_clk: mipi0-clk {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe2: gpe2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm0: gpm0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
+				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
+				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpk0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c0: fimc-is-i2c0 {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c1: fimc-is-i2c1 {
+		samsung,pins = "gpm4-2", "gpm4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_uart: fimc-is-uart {
+		samsung,pins = "gpm3-5", "gpm3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/src/arm/exynos3250.dtsi b/src/arm/exynos3250.dtsi
new file mode 100644
index 000000000000..1d52de6370d5
--- /dev/null
+++ b/src/arm/exynos3250.dtsi
@@ -0,0 +1,471 @@
+/*
+ * Samsung's Exynos3250 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos3250.h>
+
+/ {
+	compatible = "samsung,exynos3250";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		mshc0 = &mshc_0;
+		mshc1 = &mshc_1;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fixed-rate-clocks {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xusbxti: clock@0 {
+				compatible = "fixed-clock";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xusbxti";
+			};
+
+			xxti: clock@1 {
+				compatible = "fixed-clock";
+				reg = <1>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xxti";
+			};
+
+			xtcxo: clock@2 {
+				compatible = "fixed-clock";
+				reg = <2>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xtcxo";
+			};
+		};
+
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x40000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@3f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x3f000 0x1000>;
+			};
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		sys_reg: syscon@10010000 {
+			compatible = "samsung,exynos3-sysreg", "syscon";
+			reg = <0x10010000 0x400>;
+		};
+
+		pmu_system_controller: system-controller@10020000 {
+			compatible = "samsung,exynos3250-pmu", "syscon";
+			reg = <0x10020000 0x4000>;
+		};
+
+		pd_cam: cam-power-domain@10023C00 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C00 0x20>;
+		};
+
+		pd_mfc: mfc-power-domain@10023C40 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C40 0x20>;
+		};
+
+		pd_g3d: g3d-power-domain@10023C60 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C60 0x20>;
+		};
+
+		pd_lcd0: lcd0-power-domain@10023C80 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C80 0x20>;
+		};
+
+		pd_isp: isp-power-domain@10023CA0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023CA0 0x20>;
+		};
+
+		cmu: clock-controller@10030000 {
+			compatible = "samsung,exynos3250-cmu";
+			reg = <0x10030000 0x20000>;
+			#clock-cells = <1>;
+		};
+
+		rtc: rtc@10070000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x10070000 0x100>;
+			interrupts = <0 73 0>, <0 74 0>;
+			status = "disabled";
+		};
+
+		tmu: tmu@100C0000 {
+			compatible = "samsung,exynos3250-tmu";
+			reg = <0x100C0000 0x100>;
+			interrupts = <0 216 0>;
+			clocks = <&cmu CLK_TMU_APBIF>;
+			clock-names = "tmu_apbif";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+			      <0x10482000 0x1000>,
+			      <0x10484000 0x2000>,
+			      <0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		mct@10050000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
+				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos3250-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <0 225 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupts = <0 48 0>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos3250-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <0 240 0>;
+		};
+
+		mshc_0: mshc@12510000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12510000 0x1000>;
+			interrupts = <0 142 0>;
+			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mshc_1: mshc@12520000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12520000 0x1000>;
+			interrupts = <0 143 0>;
+			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma0: pdma@12680000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12680000 0x1000>;
+				interrupts = <0 138 0>;
+				clocks = <&cmu CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@12690000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12690000 0x1000>;
+				interrupts = <0 139 0>;
+				clocks = <&cmu CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		adc: adc@126C0000 {
+			compatible = "samsung,exynos3250-adc",
+				     "samsung,exynos-adc-v2";
+			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+			interrupts = <0 137 0>;
+			clock-names = "adc", "sclk";
+			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <0 109 0>;
+			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_data &uart0_fctl>;
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <0 110 0>;
+			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_data>;
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13860000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <0 113 0>;
+			clocks = <&cmu CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13870000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <0 114 0>;
+			clocks = <&cmu CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13880000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <0 115 0>;
+			clocks = <&cmu CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13890000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <0 116 0>;
+			clocks = <&cmu CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			status = "disabled";
+		};
+
+		i2c_4: i2c@138A0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138A0000 0x100>;
+			interrupts = <0 117 0>;
+			clocks = <&cmu CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
+
+		i2c_5: i2c@138B0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138B0000 0x100>;
+			interrupts = <0 118 0>;
+			clocks = <&cmu CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
+
+		i2c_6: i2c@138C0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138C0000 0x100>;
+			interrupts = <0 119 0>;
+			clocks = <&cmu CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
+
+		i2c_7: i2c@138D0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138D0000 0x100>;
+			interrupts = <0 120 0>;
+			clocks = <&cmu CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@13920000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13920000 0x100>;
+			interrupts = <0 121 0>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			status = "disabled";
+		};
+
+		spi_1: spi@13930000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13930000 0x100>;
+			interrupts = <0 122 0>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@13970000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0x13970000 0x100>;
+			interrupts = <0 126 0>;
+			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0";
+			dmas = <&pdma0 14>, <&pdma0 13>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&i2s2_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pwm: pwm@139D0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x139D0000 0x1000>;
+			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+				     <0 107 0>, <0 108 0>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupts = <0 18 0>, <0 19 0>;
+		};
+	};
+};
+
+#include "exynos3250-pinctrl.dtsi"
diff --git a/src/arm/exynos4412-odroid-common.dtsi b/src/arm/exynos4412-odroid-common.dtsi
new file mode 100644
index 000000000000..adadaf97ac01
--- /dev/null
+++ b/src/arm/exynos4412-odroid-common.dtsi
@@ -0,0 +1,384 @@
+/*
+ * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
+ * device tree source
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/input/input.h>
+#include "exynos4412.dtsi"
+
+/ {
+	firmware@0204F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_power_key>;
+
+		power_key {
+			interrupt-parent = <&gpx1>;
+			interrupts = <3 0>;
+			gpios = <&gpx1 3 1>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2s0: i2s@03830000 {
+		pinctrl-0 = <&i2s0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+		clocks = <&clock_audss EXYNOS_I2S_BUS>,
+			 <&clock_audss EXYNOS_DOUT_AUD_BUS>;
+		clock-names = "iis", "i2s_opclk0";
+	};
+
+	sound: sound {
+		compatible = "samsung,odroidx2-audio";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98090>;
+	};
+
+	mmc@12550000 {
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo20_reg &buck8_reg>;
+		status = "okay";
+
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	watchdog@10060000 {
+		status = "okay";
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	g2d@10800000 {
+		status = "okay";
+	};
+
+	camera {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+		};
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo4_reg &ldo21_reg>;
+		cd-gpios = <&gpk2 2 0>;
+		cd-inverted;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	i2c@13860000 {
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <400000>;
+		status = "okay";
+
+		usb3503: usb3503@08 {
+			compatible = "smsc,usb3503";
+			reg = <0x08>;
+
+			intn-gpios = <&gpx3 0 0>;
+			connect-gpios = <&gpx3 4 0>;
+			reset-gpios = <&gpx3 5 0>;
+			initial-mode = <1>;
+		};
+
+		max77686: pmic@09 {
+			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77686_irq>;
+			reg = <0x09>;
+			#clock-cells = <1>;
+
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ALIVE_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDDQ_M1_2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VDDQ_EXT_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDDQ_MMC2_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VDDQ_MMC1_3_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VDD10_MPLL_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD10_XPLL_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD18_ABB1_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "VDD33_USB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VDDQ_C2C_W_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VDD18_ABB0_2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "VDD10_HSIC_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VDD18_HSIC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo20_reg: LDO20 {
+					regulator-name = "LDO20_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "LDO21_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo25_reg: LDO25 {
+					regulator-name = "VDDQ_LCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-microvolt-offset = <50000>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "VDDQ_CKEM1_2_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "BUCK6_1.35V";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "BUCK7_2.0V";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "BUCK8_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+			};
+		};
+	};
+
+	i2c@13870000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
+		status = "okay";
+		max98090: max98090@10 {
+			compatible = "maxim,max98090";
+			reg = <0x10>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <0 0>;
+		};
+	};
+
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
+	hsotg@12480000 {
+		status = "okay";
+		vusb_d-supply = <&ldo15_reg>;
+		vusb_a-supply = <&ldo12_reg>;
+	};
+
+	ehci: ehci@12580000 {
+		status = "okay";
+	};
+};
+
+&pinctrl_1 {
+	gpio_power_key: power_key {
+		samsung,pins = "gpx1-3";
+		samsung,pin-pud = <0>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/src/arm/exynos4412-odroidu3.dts b/src/arm/exynos4412-odroidu3.dts
new file mode 100644
index 000000000000..c8a64be55d07
--- /dev/null
+++ b/src/arm/exynos4412-odroidu3.dts
@@ -0,0 +1,61 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
+ *
+ * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-U3 board which is based
+ * on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412-odroid-common.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-U3 board based on Exynos4412";
+	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x7FF00000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&usb3503 {
+	clock-names = "refclk";
+	clocks = <&pmu_system_controller 0>;
+	refclk-frequency = <24000000>;
+};
+
+&ehci {
+	port@1 {
+		status = "okay";
+	};
+	port@2 {
+		status = "okay";
+	};
+};
+
+&sound {
+	compatible = "samsung,odroidu3-audio";
+	samsung,model = "Odroid-U3";
+	samsung,audio-routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"Headphone Jack", "MICBIAS",
+		"IN1", "Headphone Jack",
+		"Speakers", "SPKL",
+		"Speakers", "SPKR";
+};
diff --git a/src/arm/exynos4412-odroidx2.dts b/src/arm/exynos4412-odroidx2.dts
new file mode 100644
index 000000000000..96b43f4497cc
--- /dev/null
+++ b/src/arm/exynos4412-odroidx2.dts
@@ -0,0 +1,32 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-X2 board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X2 board which is based
+ * on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos4412-odroidx.dts"
+
+/ {
+	model = "Hardkernel ODROID-X2 board based on Exynos4412";
+	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x7FF00000>;
+	};
+};
+
+&sound {
+	samsung,model = "Odroid-X2";
+	samsung,audio-routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"IN1", "Mic Jack",
+		"Mic Jack", "MICBIAS";
+};
diff --git a/src/arm/exynos5260-pinctrl.dtsi b/src/arm/exynos5260-pinctrl.dtsi
new file mode 100644
index 000000000000..f6ee55ea0708
--- /dev/null
+++ b/src/arm/exynos5260-pinctrl.dtsi
@@ -0,0 +1,574 @@
+/*
+ * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PIN_PULL_NONE	0
+#define PIN_PULL_DOWN	1
+#define PIN_PULL_UP	3
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb3_vbus0_en: usb3-vbus0-en {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+				"gpb0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+				"gpb0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif1_bus: spdif1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_hs_bus: i2c0-hs-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_hs_bus: i2c1-hs-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_hs_bus: i2c2-hs-bus {
+		samsung,pins = "gpb3-4", "gpb3-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_hs_bus: i2c3-hs-bus {
+		samsung,pins = "gpb3-6", "gpb3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb4-0", "gpb4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb4-2", "gpb4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpb4-4", "gpb4-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpb4-6", "gpb4-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c8_bus: i2c8-bus {
+		samsung,pins = "gpb5-0", "gpb5-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c9_bus: i2c9-bus {
+		samsung,pins = "gpb5-2", "gpb5-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c10_bus: i2c10-bus {
+		samsung,pins = "gpb5-4", "gpb5-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c11_bus: i2c11-bus {
+		samsung,pins = "gpb5-6", "gpb5-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			"gpe1-0", "gpe1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_2 {
+	gpz0: gpz0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/src/arm/exynos5260-xyref5260.dts b/src/arm/exynos5260-xyref5260.dts
new file mode 100644
index 000000000000..8c84ab27c19b
--- /dev/null
+++ b/src/arm/exynos5260-xyref5260.dts
@@ -0,0 +1,103 @@
+/*
+ * SAMSUNG XYREF5260 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5260.dtsi"
+
+/ {
+	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
+	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	xrtcxti: xrtcxti {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xrtcxti";
+		#clock-cells = <0>;
+	};
+};
+
+&pinctrl_0 {
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	bypass-smu;
+	supports-highspeed;
+	supports-hs200-mode; /* 200 Mhz */
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		disable-wp;
+	};
+};
diff --git a/src/arm/exynos5260.dtsi b/src/arm/exynos5260.dtsi
new file mode 100644
index 000000000000..36da38e29000
--- /dev/null
+++ b/src/arm/exynos5260.dtsi
@@ -0,0 +1,313 @@
+/*
+ * SAMSUNG EXYNOS5260 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+
+/ {
+	compatible = "samsung,exynos5260", "samsung,exynos5";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clock_top: clock-controller@10010000 {
+			compatible = "samsung,exynos5260-clock-top";
+			reg = <0x10010000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_peri: clock-controller@10200000 {
+			compatible = "samsung,exynos5260-clock-peri";
+			reg = <0x10200000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_egl: clock-controller@10600000 {
+			compatible = "samsung,exynos5260-clock-egl";
+			reg = <0x10600000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_kfc: clock-controller@10700000 {
+			compatible = "samsung,exynos5260-clock-kfc";
+			reg = <0x10700000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_g2d: clock-controller@10A00000 {
+			compatible = "samsung,exynos5260-clock-g2d";
+			reg = <0x10A00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_mif: clock-controller@10CE0000 {
+			compatible = "samsung,exynos5260-clock-mif";
+			reg = <0x10CE0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_mfc: clock-controller@11090000 {
+			compatible = "samsung,exynos5260-clock-mfc";
+			reg = <0x11090000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_g3d: clock-controller@11830000 {
+			compatible = "samsung,exynos5260-clock-g3d";
+			reg = <0x11830000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_fsys: clock-controller@122E0000 {
+			compatible = "samsung,exynos5260-clock-fsys";
+			reg = <0x122E0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_aud: clock-controller@128C0000 {
+			compatible = "samsung,exynos5260-clock-aud";
+			reg = <0x128C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_isp: clock-controller@133C0000 {
+			compatible = "samsung,exynos5260-clock-isp";
+			reg = <0x133C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_gscl: clock-controller@13F00000 {
+			compatible = "samsung,exynos5260-clock-gscl";
+			reg = <0x13F00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_disp: clock-controller@14550000 {
+			compatible = "samsung,exynos5260-clock-disp";
+			reg = <0x14550000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+				<0x10482000 0x1000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		chipid: chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		mct: mct@100B0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x100B0000 0x1000>;
+			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+					<0 107 0>, <0 122 0>, <0 123 0>,
+					<0 124 0>, <0 125 0>, <0 126 0>,
+					<0 127 0>, <0 128 0>, <0 129 0>;
+		};
+
+		cci: cci@10F00000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10F00000 0x1000>;
+			ranges = <0x0 0x10F00000 0x6000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11600000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x11600000 0x1000>;
+			interrupts = <0 79 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 0>;
+			};
+		};
+
+		pinctrl_1: pinctrl@12290000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x12290000 0x1000>;
+			interrupts = <0 157 0>;
+		};
+
+		pinctrl_2: pinctrl@128B0000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x128B0000 0x1000>;
+			interrupts = <0 243 0>;
+		};
+
+		pmu_system_controller: system-controller@10D50000 {
+			compatible = "samsung,exynos5260-pmu", "syscon";
+			reg = <0x10D50000 0x10000>;
+		};
+
+		uart0: serial@12C00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <0 146 0>;
+			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart1: serial@12C10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <0 147 0>;
+			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart2: serial@12C20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <0 148 0>;
+			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart3: serial@12860000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12860000 0x100>;
+			interrupts = <0 145 0>;
+			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		mmc_0: mmc@12140000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12140000 0x2000>;
+			interrupts = <0 156 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12150000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12150000 0x2000>;
+			interrupts = <0 158 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12160000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12160000 0x2000>;
+			interrupts = <0 159 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynos5260-pinctrl.dtsi"
diff --git a/src/arm/exynos5410-smdk5410.dts b/src/arm/exynos5410-smdk5410.dts
new file mode 100644
index 000000000000..7275bbd6fc4b
--- /dev/null
+++ b/src/arm/exynos5410-smdk5410.dts
@@ -0,0 +1,82 @@
+/*
+ * SAMSUNG SMDK5410 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+/ {
+	model = "Samsung SMDK5410 board based on EXYNOS5410";
+	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	firmware@02037000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02037000 0x1000>;
+	};
+
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		disable-wp;
+	};
+};
+
+&uart0 {
+		status = "okay";
+};
+
+&uart1 {
+		status = "okay";
+};
+
+&uart2 {
+		status = "okay";
+};
diff --git a/src/arm/exynos5410.dtsi b/src/arm/exynos5410.dtsi
new file mode 100644
index 000000000000..731eefd23fa9
--- /dev/null
+++ b/src/arm/exynos5410.dtsi
@@ -0,0 +1,221 @@
+/*
+ * SAMSUNG EXYNOS5410 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
+ * EXYNOS5410 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos5410.h>
+
+/ {
+	compatible = "samsung,exynos5410", "samsung,exynos5";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clock-frequency = <1600000000>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1600000000>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1600000000>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1600000000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		combiner: interrupt-controller@10440000 {
+			compatible = "samsung,exynos4210-combiner";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			samsung,combiner-nr = <32>;
+			reg = <0x10440000 0x1000>;
+			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg =	<0x10481000 0x1000>,
+				<0x10482000 0x1000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5410-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+		};
+
+		mct: mct@101C0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101C0000 0xB00>;
+			interrupt-parent = <&interrupt_map>;
+			interrupts = <0>, <1>, <2>, <3>,
+				<4>, <5>, <6>, <7>,
+				<8>, <9>, <10>, <11>;
+			clocks = <&fin_pll>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+
+			interrupt_map: interrupt-map {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &combiner 23 3>,
+						<1 &combiner 23 4>,
+						<2 &combiner 25 2>,
+						<3 &combiner 25 3>,
+						<4 &gic 0 120 0>,
+						<5 &gic 0 121 0>,
+						<6 &gic 0 122 0>,
+						<7 &gic 0 123 0>,
+						<8 &gic 0 128 0>,
+						<9 &gic 0 129 0>,
+						<10 &gic 0 130 0>,
+						<11 &gic 0 131 0>;
+			};
+		};
+
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x54000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x54000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@53000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x53000 0x1000>;
+			};
+		};
+
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5410-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
+
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12200000 0x1000>;
+			interrupts = <0 75 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12210000 0x1000>;
+			interrupts = <0 76 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12220000 0x1000>;
+			interrupts = <0 77 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		uart0: serial@12C00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <0 51 0>;
+			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart1: serial@12C10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <0 52 0>;
+			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart2: serial@12C20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <0 53 0>;
+			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/exynos5420-peach-pit.dts b/src/arm/exynos5420-peach-pit.dts
new file mode 100644
index 000000000000..228a6b1e0aa1
--- /dev/null
+++ b/src/arm/exynos5420-peach-pit.dts
@@ -0,0 +1,447 @@
+/*
+ * Google Peach Pit Rev 6+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5420.dtsi"
+
+/ {
+	model = "Google Peach Pit Rev 6+";
+
+	compatible = "google,pit-rev16",
+		"google,pit-rev15", "google,pit-rev14",
+		"google,pit-rev13", "google,pit-rev12",
+		"google,pit-rev11", "google,pit-rev10",
+		"google,pit-rev9", "google,pit-rev8",
+		"google,pit-rev7", "google,pit-rev6",
+		"google,pit", "google,peach","samsung,exynos5420",
+		"samsung,exynos5";
+
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98090";
+
+		samsung,model = "Peach-Pit-I2S-MAX98090";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98090>;
+	};
+
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 1 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+	vbat: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x06>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 0>;
+
+	display-timings {
+		native-mode = <&timing1>;
+
+		timing1: timing@1 {
+			clock-frequency = <70589280>;
+			hactive = <1366>;
+			vactive = <768>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <32>;
+			vback-porch = <10>;
+			vfront-porch = <12>;
+			vsync-len = <6>;
+		};
+	};
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	max98090: codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	caps2-mmc-hs200-1_8v;
+	supports-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mask_tpm_reset>;
+
+	max98090_irq: max98090-irq {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	/* We need GPX0_6 to be low at sleep time; just keep it low always */
+	mask_tpm_reset: mask-tpm-reset {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+		samsung,pin-val = <0>;
+	};
+
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd_gpio: dp_hpd_gpio {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_3 {
+	/* Drive SPI lines at x2 for better integrity */
+	spi2-bus {
+		samsung,pin-drv = <2>;
+	};
+
+	/* Drive SPI chip select at x2 for better integrity */
+	ec_spi_cs: ec-spi-cs {
+		samsung,pins = "gpb1-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi_2 {
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 0>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_spi_cs &ec_irq>;
+		reg = <0>;
+		spi-max-frequency = <3125000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
+&uart_3 {
+	status = "okay";
+};
+
+&usbdrd_phy0 {
+	vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+	vbus-supply = <&usb301_vbus_reg>;
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+	timeout-sec = <32>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/exynos5800-peach-pi.dts b/src/arm/exynos5800-peach-pi.dts
new file mode 100644
index 000000000000..f3ee48bbe05f
--- /dev/null
+++ b/src/arm/exynos5800-peach-pi.dts
@@ -0,0 +1,445 @@
+/*
+ * Google Peach Pi Rev 10+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5800.dtsi"
+
+/ {
+	model = "Google Peach Pi Rev 10+";
+
+	compatible = "google,pi-rev16",
+		"google,pi-rev15", "google,pi-rev14",
+		"google,pi-rev13", "google,pi-rev12",
+		"google,pi-rev11", "google,pi-rev10",
+		"google,pi", "google,peach", "samsung,exynos5800",
+		"samsung,exynos5";
+
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98091";
+
+		samsung,model = "Peach-Pi-I2S-MAX98091";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98091>;
+	};
+
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 1 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+	vbat: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 0>;
+
+	display-timings {
+		native-mode = <&timing1>;
+
+		timing1: timing@1 {
+			clock-frequency = <150660000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hfront-porch = <60>;
+			hback-porch = <172>;
+			hsync-len = <80>;
+			vback-porch = <25>;
+			vfront-porch = <10>;
+			vsync-len = <10>;
+		};
+	};
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	max98091: codec@10 {
+		compatible = "maxim,max98091";
+		reg = <0x10>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98091_irq>;
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	caps2-mmc-hs200-1_8v;
+	supports-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mask_tpm_reset>;
+
+	max98091_irq: max98091-irq {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	/* We need GPX0_6 to be low at sleep time; just keep it low always */
+	mask_tpm_reset: mask-tpm-reset {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+		samsung,pin-val = <0>;
+	};
+
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd_gpio: dp_hpd_gpio {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_3 {
+	/* Drive SPI lines at x2 for better integrity */
+	spi2-bus {
+		samsung,pin-drv = <2>;
+	};
+
+	/* Drive SPI chip select at x2 for better integrity */
+	ec_spi_cs: ec-spi-cs {
+		samsung,pins = "gpb1-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi_2 {
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 0>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_spi_cs &ec_irq>;
+		reg = <0>;
+		spi-max-frequency = <3125000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
+&uart_3 {
+	status = "okay";
+};
+
+&usbdrd_phy0 {
+	vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+	vbus-supply = <&usb301_vbus_reg>;
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+	timeout-sec = <32>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/exynos5800.dtsi b/src/arm/exynos5800.dtsi
new file mode 100644
index 000000000000..c0bb3563cac1
--- /dev/null
+++ b/src/arm/exynos5800.dtsi
@@ -0,0 +1,28 @@
+/*
+ * SAMSUNG EXYNOS5800 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
+ * EXYNOS5800 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5420.dtsi"
+
+/ {
+	compatible = "samsung,exynos5800", "samsung,exynos5";
+};
+
+&clock {
+	compatible = "samsung,exynos5800-clock";
+};
+
+&mfc {
+	compatible = "samsung,mfc-v8";
+};
diff --git a/src/arm/hisi-x5hd2-dkb.dts b/src/arm/hisi-x5hd2-dkb.dts
new file mode 100644
index 000000000000..05b44c272c9a
--- /dev/null
+++ b/src/arm/hisi-x5hd2-dkb.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2013-2014 Linaro Ltd.
+ * Copyright (c) 2013-2014 Hisilicon Limited.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "hisi-x5hd2.dtsi"
+
+/ {
+	model = "Hisilicon HIX5HD2 Development Board";
+	compatible = "hisilicon,hix5hd2";
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200 earlyprintk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hix5hd2-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/hisi-x5hd2.dtsi b/src/arm/hisi-x5hd2.dtsi
new file mode 100644
index 000000000000..f85ba2924ff7
--- /dev/null
+++ b/src/arm/hisi-x5hd2.dtsi
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) 2013-2014 Linaro Ltd.
+ * Copyright (c) 2013-2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/hix5hd2-clock.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	gic: interrupt-controller@f8a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		/* gic dist base, gic cpu base */
+		reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0xf8000000 0x8000000>;
+
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "arm,amba-bus";
+			ranges;
+
+			timer0: timer@00002000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00002000 0x1000>;
+				/* timer00 & timer01 */
+				interrupts = <0 24 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer1: timer@00a29000 {
+				/*
+				 * Only used in NORMAL state, not available ins
+				 * SLOW or DOZE state.
+				 * The rate is fixed in 24MHz.
+				 */
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a29000 0x1000>;
+				/* timer10 & timer11 */
+				interrupts = <0 25 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer2: timer@00a2a000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a2a000 0x1000>;
+				/* timer20 & timer21 */
+				interrupts = <0 26 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer3: timer@00a2b000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a2b000 0x1000>;
+				/* timer30 & timer31 */
+				interrupts = <0 27 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer4: timer@00a81000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a81000 0x1000>;
+				/* timer30 & timer31 */
+				interrupts = <0 28 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			uart0: uart@00b00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b00000 0x1000>;
+				interrupts = <0 49 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart1: uart@00006000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00006000 0x1000>;
+				interrupts = <0 50 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart2: uart@00b02000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b02000 0x1000>;
+				interrupts = <0 51 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart3: uart@00b03000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b03000 0x1000>;
+				interrupts = <0 52 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart4: uart@00b04000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb04000 0x1000>;
+				interrupts = <0 53 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+		};
+
+		local_timer@00a00600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x00a00600 0x20>;
+			interrupts = <1 13 0xf01>;
+		};
+
+		l2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a10000 0x100000>;
+			interrupts = <0 15 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		sysctrl: system-controller@00000000 {
+			compatible = "hisilicon,sysctrl";
+			reg = <0x00000000 0x1000>;
+			reboot-offset = <0x4>;
+		};
+
+		cpuctrl@00a22000 {
+			compatible = "hisilicon,cpuctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00a22000 0x2000>;
+			ranges = <0 0x00a22000 0x2000>;
+
+			clock: clock@0 {
+				compatible = "hisilicon,hix5hd2-clock";
+				reg = <0 0x2000>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+};
diff --git a/src/arm/imx25-eukrea-cpuimx25.dtsi b/src/arm/imx25-eukrea-cpuimx25.dtsi
new file mode 100644
index 000000000000..d6f27641c0ef
--- /dev/null
+++ b/src/arm/imx25-eukrea-cpuimx25.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX25";
+	compatible = "eukrea,cpuimx25", "fsl,imx25";
+
+	memory {
+		reg = <0x80000000 0x4000000>; /* 64M */
+	};
+};
+
+&fec {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-cpuimx25 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
+				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
+				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
+				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
+				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
+				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
+				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
new file mode 100644
index 000000000000..68d0834a2d1e
--- /dev/null
+++ b/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	cmo_qvga: display {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xcad08b80>;
+		bus-width = <18>;
+		native-mode = <&qvga_timings>;
+		display-timings {
+			qvga_timings: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <30>;
+				hfront-porch = <38>;
+				vback-porch = <20>;
+				vfront-porch = <3>;
+				hsync-len = <15>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_lcd_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
+		};
+	};
+};
+
+&lcdc {
+	display = <&cmo_qvga>;
+	fsl,lpccr = <0x00a903ff>;
+	lcd-supply = <&reg_lcd_3v3>;
+	status = "okay";
+};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
new file mode 100644
index 000000000000..8eee2f65fe00
--- /dev/null
+++ b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_svga: display {
+		model = "DVI-SVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		native-mode = <&dvi_svga_timings>;
+		display-timings {
+			dvi_svga_timings: 800x600 {
+				clock-frequency = <40000000>;
+				hactive = <800>;
+				vactive = <600>;
+				hback-porch = <75>;
+				hfront-porch = <75>;
+				vback-porch = <7>;
+				vfront-porch = <75>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_svga>;
+	status = "okay";
+};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
new file mode 100644
index 000000000000..447da6263169
--- /dev/null
+++ b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_vga: display {
+		model = "DVI-VGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		native-mode = <&dvi_vga_timings>;
+		display-timings {
+			dvi_vga_timings: 640x480 {
+				clock-frequency = <31250000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <100>;
+				hfront-porch = <100>;
+				vback-porch = <7>;
+				vfront-porch = <100>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_vga>;
+	status = "okay";
+};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
new file mode 100644
index 000000000000..ed1d0b4578ef
--- /dev/null
+++ b/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx25-eukrea-cpuimx25.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD25";
+	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		bp1 {
+			label = "BP1";
+			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx25-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 20>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX25_PAD_KPP_COL3__AUD5_TXFS		0xe0
+				MX25_PAD_KPP_COL2__AUD5_TXC		0xe0
+				MX25_PAD_KPP_COL1__AUD5_RXD		0xe0
+				MX25_PAD_KPP_COL0__AUD5_TXD		0xe0
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__SD1_CMD		0x400000c0
+				MX25_PAD_SD1_CLK__SD1_CLK		0x400000c0
+				MX25_PAD_SD1_DATA0__SD1_DATA0		0x400000c0
+				MX25_PAD_SD1_DATA1__SD1_DATA1		0x400000c0
+				MX25_PAD_SD1_DATA2__SD1_DATA2		0x400000c0
+				MX25_PAD_SD1_DATA3__SD1_DATA3		0x400000c0
+			>;
+		};
+
+		pinctrl_gpiokeys: gpiokeysgrp {
+			fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
+		};
+
+		pinctrl_gpioled: gpioledgrp {
+			fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
+		};
+
+		pinctrl_lcdc: lcdcgrp {
+			fsl,pins = <
+				MX25_PAD_LD0__LD0			0x1
+				MX25_PAD_LD1__LD1			0x1
+				MX25_PAD_LD2__LD2			0x1
+				MX25_PAD_LD3__LD3			0x1
+				MX25_PAD_LD4__LD4			0x1
+				MX25_PAD_LD5__LD5			0x1
+				MX25_PAD_LD6__LD6			0x1
+				MX25_PAD_LD7__LD7			0x1
+				MX25_PAD_LD8__LD8			0x1
+				MX25_PAD_LD9__LD9			0x1
+				MX25_PAD_LD10__LD10			0x1
+				MX25_PAD_LD11__LD11			0x1
+				MX25_PAD_LD12__LD12			0x1
+				MX25_PAD_LD13__LD13			0x1
+				MX25_PAD_LD14__LD14			0x1
+				MX25_PAD_LD15__LD15			0x1
+				MX25_PAD_GPIO_E__LD16			0x1
+				MX25_PAD_GPIO_F__LD17			0x1
+				MX25_PAD_HSYNC__HSYNC			0x80000000
+				MX25_PAD_VSYNC__VSYNC			0x80000000
+				MX25_PAD_LSCLK__LSCLK			0x80000000
+				MX25_PAD_OE_ACD__OE_ACD			0x80000000
+				MX25_PAD_CONTRAST__CONTRAST		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
+				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
+				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
+				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX25_PAD_UART2_RXD__UART2_RXD		0x80000000
+				MX25_PAD_UART2_TXD__UART2_TXD		0x80000000
+				MX25_PAD_UART2_RTS__UART2_RTS		0x80000000
+				MX25_PAD_UART2_CTS__UART2_CTS		0x80000000
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/src/arm/imx25-pinfunc.h b/src/arm/imx25-pinfunc.h
new file mode 100644
index 000000000000..9238a95d8e62
--- /dev/null
+++ b/src/arm/imx25-pinfunc.h
@@ -0,0 +1,494 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Based on imx35-pinfunc.h in the same directory Which is:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX25_PINFUNC_H
+#define __DTS_IMX25_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
+#define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_A13__A13			0x00c 0x22C 0x000 0x00 0x000
+#define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
+
+#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x10 0x000
+#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x15 0x000
+
+#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x10 0x000
+#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x15 0x000
+
+#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x10 0x000
+#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x10 0x000
+#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x15 0x000
+
+#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x10 0x000
+#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x15 0x000
+#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x17 0x000
+
+#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x10 0x000
+#define MX25_PAD_A19__FEC_RX_ER			0x024 0x240 0x518 0x17 0x000
+#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x15 0x000
+
+#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x10 0x000
+#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x15 0x000
+#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x17 0x000
+
+#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x10 0x000
+#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x15 0x000
+#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x17 0x000
+
+#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x10 0x000
+#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x10 0x000
+#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x15 0x000
+
+#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x10 0x000
+#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x15 0x000
+#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x17 0x000
+
+#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x10 0x000
+#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x15 0x000
+#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x17 0x000
+
+#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x10 0x000
+#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x14 0x000
+#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x15 0x000
+
+#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x10 0x000
+#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x14 0x000
+#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x15 0x000
+
+#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x10 0x000
+#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x14 0x000
+#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x15 0x000
+
+#define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS1__CS1			0x050 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
+#define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x10 0x000
+#define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
+#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x13 0x000
+#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x15 0x000
+
+#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x10 0x000
+#define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
+#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x13 0x000
+#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x15 0x000
+
+#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x10 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x15 0x000
+
+#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x10 0x000
+#define MX25_PAD_ECB__UART5_TXD_MUX		0x060 0x270 0x000 0x13 0x000
+#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x15 0x000
+
+#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x10 0x000
+#define MX25_PAD_LBA__UART5_RXD_MUX		0x064 0x274 0x578 0x13 0x000
+#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x15 0x000
+
+#define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
+#define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x10 0x000
+#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x14 0x000
+#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x15 0x000
+
+#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x10 0x000
+#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x15 0x000
+
+#define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
+#define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
+#define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
+
+#define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
+#define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
+#define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
+
+#define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
+#define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
+#define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
+
+#define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
+#define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
+
+#define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
+#define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
+
+#define MX25_PAD_D10__D10			0x09c 0x294 0x000 0x00 0x000
+#define MX25_PAD_D10__GPIO_4_10			0x09c 0x294 0x000 0x05 0x000
+#define MX25_PAD_D10__USBOTG_OC			0x09c 0x294 0x57c 0x06 0x000
+
+#define MX25_PAD_D9__D9				0x0a0 0x298 0x000 0x00 0x000
+#define MX25_PAD_D9__GPIO_4_11			0x0a0 0x298 0x000 0x05 0x000
+#define MX25_PAD_D9__USBH2_PWR			0x0a0 0x298 0x000 0x06 0x000
+
+#define MX25_PAD_D8__D8				0x0a4 0x29c 0x000 0x00 0x000
+#define MX25_PAD_D8__GPIO_4_12			0x0a4 0x29c 0x000 0x05 0x000
+#define MX25_PAD_D8__USBH2_OC			0x0a4 0x29c 0x580 0x06 0x000
+
+#define MX25_PAD_D7__D7				0x0a8 0x2a0 0x000 0x00 0x000
+#define MX25_PAD_D7__GPIO_4_13			0x0a8 0x2a0 0x000 0x05 0x000
+
+#define MX25_PAD_D6__D6				0x0ac 0x2a4 0x000 0x00 0x000
+#define MX25_PAD_D6__GPIO_4_14			0x0ac 0x2a4 0x000 0x05 0x000
+
+#define MX25_PAD_D5__D5				0x0b0 0x2a8 0x000 0x00 0x000
+#define MX25_PAD_D5__GPIO_4_15			0x0b0 0x2a8 0x000 0x05 0x000
+
+#define MX25_PAD_D4__D4				0x0b4 0x2ac 0x000 0x00 0x000
+#define MX25_PAD_D4__GPIO_4_16			0x0b4 0x2ac 0x000 0x05 0x000
+
+#define MX25_PAD_D3__D3				0x0b8 0x2b0 0x000 0x00 0x000
+#define MX25_PAD_D3__GPIO_4_17			0x0b8 0x2b0 0x000 0x05 0x000
+
+#define MX25_PAD_D2__D2				0x0bc 0x2b4 0x000 0x00 0x000
+#define MX25_PAD_D2__GPIO_4_18			0x0bc 0x2b4 0x000 0x05 0x000
+
+#define MX25_PAD_D1__D1				0x0c0 0x2b8 0x000 0x00 0x000
+#define MX25_PAD_D1__GPIO_4_19			0x0c0 0x2b8 0x000 0x05 0x000
+
+#define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
+#define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
+
+#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x10 0x000
+#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x12 0x000
+#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x15 0x000
+
+#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x10 0x000
+#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x12 0x000
+#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x15 0x000
+
+#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x10 0x000
+#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x15 0x000
+
+#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x10 0x000
+#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x15 0x000
+
+#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x10 0x000
+#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x15 0x000
+
+#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x10 0x000
+#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x15 0x000
+
+#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x10 0x000
+#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x15 0x000
+
+#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x10 0x000
+#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x15 0x000
+
+#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x10 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x15 0x000
+
+#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x10 0x000
+#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x15 0x001
+
+#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x10 0x000
+#define MX25_PAD_LD10__FEC_RX_ER		0x0f0 0x2e8 0x518 0x15 0x001
+
+#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x10 0x000
+#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x15 0x001
+
+#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x15 0x001
+
+#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x15 0x000
+
+#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x15 0x000
+
+#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x15 0x001
+
+#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x10 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x15 0x000
+
+#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x10 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x15 0x000
+
+#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x10 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x15 0x000
+
+#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x15 0x000
+
+#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x10 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x14 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x15 0x001
+
+#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x10 0x000
+#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x15 0x000
+#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x16 0x001
+
+#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x10 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX		0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x15 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x15 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x17 0x001
+
+#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x10 0x000
+#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x15 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x10 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x15 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x10 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x10 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x10 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x10 0x000
+#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x10 0x000
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x10 0x000
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x10 0x000
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x10 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x10 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x10 0x000
+#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x10 0x000
+#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x10 0x000
+#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x11 0x001
+#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x10 0x000
+#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x11 0x001
+#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x10 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x10 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x10 0x000
+#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x12 0x002
+#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER		0x18c 0x384 0x518 0x12 0x002
+#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x10 0x000
+#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x12 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x10 0x000
+#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x12 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x13 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x15 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x10 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x13 0x002
+#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW3__CSI_LD1		0x1b4 0x3ac 0x48c 0x13 0x002
+#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD_MUX	0x1b8 0x3b0 0x570 0x11 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD_MUX	0x1bc 0x3b4 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x12 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x12 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x12 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x10 0x000
+#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x14 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x15 0x000
+
+#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x10 0x000
+#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x11 0x000
+#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x15 0x000
+
+#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x10 0x000
+#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x15 0x000
+
+#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
+
+#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x10 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x16 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x12 0x000
+
+#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x10 0x000
+#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
+#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x12 0x001
+
+#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x10 0x000
+#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x16 0x000
+
+#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x10 0x000
+#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x16 0x001
+
+#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x14 0x000
+
+#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x14 0x000
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x10 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x10 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x14 0x000
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x15 0x000
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x10 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x14 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x15 0x000
+
+#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x10 0x000
+#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x15 0x000
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
+
+#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/src/arm/imx27-eukrea-cpuimx27.dtsi b/src/arm/imx27-eukrea-cpuimx27.dtsi
new file mode 100644
index 000000000000..e2242638ea0b
--- /dev/null
+++ b/src/arm/imx27-eukrea-cpuimx27.dtsi
@@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX27";
+	compatible = "eukrea,cpuimx27", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		clk14745600: clock@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <14745600>;
+			reg = <0>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x04000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
+	};
+
+	uart8250@3,200000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_1>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x200000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,400000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_2>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x400000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,800000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_3>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x800000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,1000000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_4>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x1000000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
+				MX27_PAD_ATA_DATA13__FEC_COL		0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA		0x0
+				MX27_PAD_I2C_CLK__I2C_CLK		0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB			0x0
+				MX27_PAD_NFCLE__NFCLE			0x0
+				MX27_PAD_NFWP_B__NFWP_B			0x0
+				MX27_PAD_NFCE_B__NFCE_B			0x0
+				MX27_PAD_NFALE__NFALE			0x0
+				MX27_PAD_NFRE_B__NFRE_B			0x0
+				MX27_PAD_NFWE_B__NFWE_B			0x0
+			>;
+		};
+
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE			0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK		0x0
+				MX27_PAD_SD2_CMD__SD2_CMD		0x0
+				MX27_PAD_SD2_D0__SD2_D0			0x0
+				MX27_PAD_SD2_D1__SD2_D1			0x0
+				MX27_PAD_SD2_D2__SD2_D2			0x0
+				MX27_PAD_SD2_D3__SD2_D3			0x0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
+				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
+				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
+				MX27_PAD_USBH1_FS__UART4_RTS		0x0
+			>;
+		};
+
+		pinctrl_uart8250_1: uart82501grp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23		0x0
+			>;
+		};
+
+		pinctrl_uart8250_2: uart82502grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
+			>;
+		};
+
+		pinctrl_uart8250_3: uart82503grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
+			>;
+		};
+
+		pinctrl_uart8250_4: uart82504grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts b/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
new file mode 100644
index 000000000000..2ab65fc4c1e1
--- /dev/null
+++ b/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-eukrea-cpuimx27.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD27";
+	compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
+
+	display0: CMO-QVGA {
+		model = "CMO-QVGA";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfad08b80>;
+
+		display-timings {
+			timing0: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <20>;
+				hsync-len = <30>;
+				hfront-porch = <38>;
+				vback-porch = <4>;
+				vsync-len = <3>;
+				vfront-porch = <15>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+
+		led1 {
+			label = "system::live";
+			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "system::user";
+			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		reg_lcd: regulator@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcdreg>;
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "LCD";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	ads7846 {
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		reg = <0>;
+		interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		spi-cpol;
+		spi-max-frequency = <1500000>;
+		ti,keep-vref-on;
+	};
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb>;
+	display = <&display0>;
+	lcd-supply = <&reg_lcd>;
+	fsl,dmacr = <0x00040060>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	codec: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+	>;
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	codec-handle = <&codec>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27-baseboard {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO	0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI	0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK	0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* CS0 */
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__GPIO5_5		0x0
+			>;
+		};
+
+		pinctrl_gpioleds: gpioledsgrp {
+			fsl,pins = <
+				MX27_PAD_PC_PWRON__GPIO6_16	0x0
+				MX27_PAD_PC_CD2_B__GPIO6_19	0x0
+			>;
+		};
+
+		pinctrl_imxfb: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0		0x0
+				MX27_PAD_LD1__LD1		0x0
+				MX27_PAD_LD2__LD2		0x0
+				MX27_PAD_LD3__LD3		0x0
+				MX27_PAD_LD4__LD4		0x0
+				MX27_PAD_LD5__LD5		0x0
+				MX27_PAD_LD6__LD6		0x0
+				MX27_PAD_LD7__LD7		0x0
+				MX27_PAD_LD8__LD8		0x0
+				MX27_PAD_LD9__LD9		0x0
+				MX27_PAD_LD10__LD10		0x0
+				MX27_PAD_LD11__LD11		0x0
+				MX27_PAD_LD12__LD12		0x0
+				MX27_PAD_LD13__LD13		0x0
+				MX27_PAD_LD14__LD14		0x0
+				MX27_PAD_LD15__LD15		0x0
+				MX27_PAD_LD16__LD16		0x0
+				MX27_PAD_LD17__LD17		0x0
+				MX27_PAD_CONTRAST__CONTRAST	0x0
+				MX27_PAD_OE_ACD__OE_ACD		0x0
+				MX27_PAD_HSYNC__HSYNC		0x0
+				MX27_PAD_VSYNC__VSYNC		0x0
+			>;
+		};
+
+		pinctrl_lcdreg: lcdreggrp {
+			fsl,pins = <
+				MX27_PAD_CLS__GPIO1_25		0x0
+			>;
+		};
+
+		pinctrl_sdhc1: sdhc1grp {
+			fsl,pins = <
+				MX27_PAD_SD1_CLK__SD1_CLK	0x0
+				MX27_PAD_SD1_CMD__SD1_CMD	0x0
+				MX27_PAD_SD1_D0__SD1_D0		0x0
+				MX27_PAD_SD1_D1__SD1_D1		0x0
+				MX27_PAD_SD1_D2__SD1_D2		0x0
+				MX27_PAD_SD1_D3__SD1_D3		0x0
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI4_CLK__SSI4_CLK	0x0
+				MX27_PAD_SSI4_FS__SSI4_FS	0x0
+				MX27_PAD_SSI4_RXDAT__SSI4_RXDAT	0x1
+				MX27_PAD_SSI4_TXDAT__SSI4_TXDAT	0x1
+			>;
+		};
+
+		pinctrl_touch: touchgrp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_RDY__GPIO4_25	0x0 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD	0x0
+				MX27_PAD_UART1_RXD__UART1_RXD	0x0
+				MX27_PAD_UART1_CTS__UART1_CTS	0x0
+				MX27_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD	0x0
+				MX27_PAD_UART2_RXD__UART2_RXD	0x0
+				MX27_PAD_UART2_CTS__UART2_CTS	0x0
+				MX27_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD	0x0
+				MX27_PAD_UART3_RXD__UART3_RXD	0x0
+				MX27_PAD_UART3_CTS__UART3_CTS	0x0
+				MX27_PAD_UART3_RTS__UART3_RTS	0x0
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx27-phytec-phycard-s-som.dtsi b/src/arm/imx27-phytec-phycard-s-som.dtsi
new file mode 100644
index 000000000000..1b6248079682
--- /dev/null
+++ b/src/arm/imx27-phytec-phycard-s-som.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/src/arm/imx27-phytec-phycore-som.dtsi b/src/arm/imx27-phytec-phycore-som.dtsi
new file mode 100644
index 000000000000..b4e955e3be8d
--- /dev/null
+++ b/src/arm/imx27-phytec-phycore-som.dtsi
@@ -0,0 +1,349 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pcm038";
+	compatible = "phytec,imx27-pcm038", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_5v0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			vcc-supply = <&sw3_reg>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
+			clock-names = "main_clk";
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	/* SSI0 <=> PINS_4 (MC13783 Audio) */
+	ssi0 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <0xcb205000>;
+	};
+
+	pins4 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <0x00001000>;
+	};
+};
+
+&cspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13783@0 {
+		compatible = "fsl,mc13783";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		pmicleds: leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x001 0x000 0x000 0x000 0x000 0x000>;
+		};
+
+		regulators {
+			/* SW1A and SW1B joined operation */
+			sw1_reg: sw1a {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1520000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* SW2A and SW2B joined operation */
+			sw2_reg: sw2a {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo_reg: violo {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi_reg: viohi {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen_reg: vgen {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vrf1_reg: vrf1 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vrf2_reg: vrf2 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc1_reg: vmmc1 {
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			gpo1_reg: gpo1 { };
+
+			pwgt1spi_reg: pwgt1spi {
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	lm75@4a {
+		compatible = "national,lm75";
+		reg = <0x4a>;
+	};
+};
+
+&iomuxc {
+	imx27_phycore_som {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* SPI1 CS0 */
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+				MX27_PAD_SSI3_TXDAT__GPIO3_30	0x0 /* FEC RST */
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23	0x0 /* PMIC IRQ */
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI1_FS__SSI1_FS 0x0
+				MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
+				MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
+				MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbphy0>;
+	vbus-supply = <&sw3_reg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	sram: sram@1,0 {
+		compatible = "mtd-ram";
+		reg = <1 0x00000000 0x00800000>;
+		bank-width = <2>;
+		linux,mtd-name = "mtd-ram.0";
+		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/src/arm/imx27-pinfunc.h b/src/arm/imx27-pinfunc.h
new file mode 100644
index 000000000000..597bb5f74dcc
--- /dev/null
+++ b/src/arm/imx27-pinfunc.h
@@ -0,0 +1,480 @@
+/*
+ * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_IMX27_PINFUNC_H
+#define __DTS_IMX27_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function:      0 - Primary function
+ *                1 - Alternate function
+ *                2 - GPIO
+ * direction:     0 - Input
+ *                1 - Output
+ * gpio_oconf:    0 - A_IN
+ *                1 - B_IN
+ *                2 - C_IN
+ *                3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ *                1 - Interrupt Status Register
+ *                2 - 0
+ *                3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ * number on the specific port (between 0 and 31).
+ */
+
+#define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
+#define MX27_PAD_USBH2_CLK__GPIO1_0                        0x00 0x032
+#define MX27_PAD_USBH2_DIR__USBH2_DIR                      0x01 0x000
+#define MX27_PAD_USBH2_DIR__GPIO1_1                        0x01 0x032
+#define MX27_PAD_USBH2_DATA7__USBH2_DATA7                  0x02 0x004
+#define MX27_PAD_USBH2_DATA7__GPIO1_2                      0x02 0x032
+#define MX27_PAD_USBH2_NXT__USBH2_NXT                      0x03 0x000
+#define MX27_PAD_USBH2_NXT__GPIO1_3                        0x03 0x032
+#define MX27_PAD_USBH2_STP__USBH2_STP                      0x04 0x004
+#define MX27_PAD_USBH2_STP__GPIO1_4                        0x04 0x032
+#define MX27_PAD_LSCLK__LSCLK                              0x05 0x004
+#define MX27_PAD_LSCLK__GPIO1_5                            0x05 0x032
+#define MX27_PAD_LD0__LD0                                  0x06 0x004
+#define MX27_PAD_LD0__GPIO1_6                              0x06 0x032
+#define MX27_PAD_LD1__LD1                                  0x07 0x004
+#define MX27_PAD_LD1__GPIO1_7                              0x07 0x032
+#define MX27_PAD_LD2__LD2                                  0x08 0x004
+#define MX27_PAD_LD2__GPIO1_8                              0x08 0x032
+#define MX27_PAD_LD3__LD3                                  0x09 0x004
+#define MX27_PAD_LD3__GPIO1_9                              0x09 0x032
+#define MX27_PAD_LD4__LD4                                  0x0a 0x004
+#define MX27_PAD_LD4__GPIO1_10                             0x0a 0x032
+#define MX27_PAD_LD5__LD5                                  0x0b 0x004
+#define MX27_PAD_LD5__GPIO1_11                             0x0b 0x032
+#define MX27_PAD_LD6__LD6                                  0x0c 0x004
+#define MX27_PAD_LD6__GPIO1_12                             0x0c 0x032
+#define MX27_PAD_LD7__LD7                                  0x0d 0x004
+#define MX27_PAD_LD7__GPIO1_13                             0x0d 0x032
+#define MX27_PAD_LD8__LD8                                  0x0e 0x004
+#define MX27_PAD_LD8__GPIO1_14                             0x0e 0x032
+#define MX27_PAD_LD9__LD9                                  0x0f 0x004
+#define MX27_PAD_LD9__GPIO1_15                             0x0f 0x032
+#define MX27_PAD_LD10__LD10                                0x10 0x004
+#define MX27_PAD_LD10__GPIO1_16                            0x10 0x032
+#define MX27_PAD_LD11__LD11                                0x11 0x004
+#define MX27_PAD_LD11__GPIO1_17                            0x11 0x032
+#define MX27_PAD_LD12__LD12                                0x12 0x004
+#define MX27_PAD_LD12__GPIO1_18                            0x12 0x032
+#define MX27_PAD_LD13__LD13                                0x13 0x004
+#define MX27_PAD_LD13__GPIO1_19                            0x13 0x032
+#define MX27_PAD_LD14__LD14                                0x14 0x004
+#define MX27_PAD_LD14__GPIO1_20                            0x14 0x032
+#define MX27_PAD_LD15__LD15                                0x15 0x004
+#define MX27_PAD_LD15__GPIO1_21                            0x15 0x032
+#define MX27_PAD_LD16__LD16                                0x16 0x004
+#define MX27_PAD_LD16__GPIO1_22                            0x16 0x032
+#define MX27_PAD_LD17__LD17                                0x17 0x004
+#define MX27_PAD_LD17__GPIO1_23                            0x17 0x032
+#define MX27_PAD_REV__REV                                  0x18 0x004
+#define MX27_PAD_REV__GPIO1_24                             0x18 0x032
+#define MX27_PAD_CLS__CLS                                  0x19 0x004
+#define MX27_PAD_CLS__GPIO1_25                             0x19 0x032
+#define MX27_PAD_PS__PS                                    0x1a 0x004
+#define MX27_PAD_PS__GPIO1_26                              0x1a 0x032
+#define MX27_PAD_SPL_SPR__SPL_SPR                          0x1b 0x004
+#define MX27_PAD_SPL_SPR__GPIO1_27                         0x1b 0x032
+#define MX27_PAD_HSYNC__HSYNC                              0x1c 0x004
+#define MX27_PAD_HSYNC__GPIO1_28                           0x1c 0x032
+#define MX27_PAD_VSYNC__VSYNC                              0x1d 0x004
+#define MX27_PAD_VSYNC__GPIO1_29                           0x1d 0x032
+#define MX27_PAD_CONTRAST__CONTRAST                        0x1e 0x004
+#define MX27_PAD_CONTRAST__GPIO1_30                        0x1e 0x032
+#define MX27_PAD_OE_ACD__OE_ACD                            0x1f 0x004
+#define MX27_PAD_OE_ACD__GPIO1_31                          0x1f 0x032
+#define MX27_PAD_SD2_D0__SD2_D0                            0x24 0x004
+#define MX27_PAD_SD2_D0__MSHC_DATA0                        0x24 0x005
+#define MX27_PAD_SD2_D0__GPIO2_4                           0x24 0x032
+#define MX27_PAD_SD2_D1__SD2_D1                            0x25 0x004
+#define MX27_PAD_SD2_D1__MSHC_DATA1                        0x25 0x005
+#define MX27_PAD_SD2_D1__GPIO2_5                           0x25 0x032
+#define MX27_PAD_SD2_D2__SD2_D2                            0x26 0x004
+#define MX27_PAD_SD2_D2__MSHC_DATA2                        0x26 0x005
+#define MX27_PAD_SD2_D2__GPIO2_6                           0x26 0x032
+#define MX27_PAD_SD2_D3__SD2_D3                            0x27 0x004
+#define MX27_PAD_SD2_D3__MSHC_DATA3                        0x27 0x005
+#define MX27_PAD_SD2_D3__GPIO2_7                           0x27 0x032
+#define MX27_PAD_SD2_CMD__SD2_CMD                          0x28 0x004
+#define MX27_PAD_SD2_CMD__MSHC_BS                          0x28 0x005
+#define MX27_PAD_SD2_CMD__GPIO2_8                          0x28 0x032
+#define MX27_PAD_SD2_CLK__SD2_CLK                          0x29 0x004
+#define MX27_PAD_SD2_CLK__MSHC_SCLK                        0x29 0x005
+#define MX27_PAD_SD2_CLK__GPIO2_9                          0x29 0x032
+#define MX27_PAD_CSI_D0__CSI_D0                            0x2a 0x000
+#define MX27_PAD_CSI_D0__UART6_TXD                         0x2a 0x005
+#define MX27_PAD_CSI_D0__GPIO2_10                          0x2a 0x032
+#define MX27_PAD_CSI_D1__CSI_D1                            0x2b 0x000
+#define MX27_PAD_CSI_D1__UART6_RXD                         0x2b 0x001
+#define MX27_PAD_CSI_D1__GPIO2_11                          0x2b 0x032
+#define MX27_PAD_CSI_D2__CSI_D2                            0x2c 0x000
+#define MX27_PAD_CSI_D2__UART6_CTS                         0x2c 0x005
+#define MX27_PAD_CSI_D2__GPIO2_12                          0x2c 0x032
+#define MX27_PAD_CSI_D3__CSI_D3                            0x2d 0x000
+#define MX27_PAD_CSI_D3__UART6_RTS                         0x2d 0x001
+#define MX27_PAD_CSI_D3__GPIO2_13                          0x2d 0x032
+#define MX27_PAD_CSI_D4__CSI_D4                            0x2e 0x000
+#define MX27_PAD_CSI_D4__GPIO2_14                          0x2e 0x032
+#define MX27_PAD_CSI_MCLK__CSI_MCLK                        0x2f 0x004
+#define MX27_PAD_CSI_MCLK__GPIO2_15                        0x2f 0x032
+#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK                    0x30 0x000
+#define MX27_PAD_CSI_PIXCLK__GPIO2_16                      0x30 0x032
+#define MX27_PAD_CSI_D5__CSI_D5                            0x31 0x000
+#define MX27_PAD_CSI_D5__GPIO2_17                          0x31 0x032
+#define MX27_PAD_CSI_D6__CSI_D6                            0x32 0x000
+#define MX27_PAD_CSI_D6__UART5_TXD                         0x32 0x005
+#define MX27_PAD_CSI_D6__GPIO2_18                          0x32 0x032
+#define MX27_PAD_CSI_D7__CSI_D7                            0x33 0x000
+#define MX27_PAD_CSI_D7__UART5_RXD                         0x33 0x001
+#define MX27_PAD_CSI_D7__GPIO2_19                          0x33 0x032
+#define MX27_PAD_CSI_VSYNC__CSI_VSYNC                      0x34 0x000
+#define MX27_PAD_CSI_VSYNC__UART5_CTS                      0x34 0x005
+#define MX27_PAD_CSI_VSYNC__GPIO2_20                       0x34 0x032
+#define MX27_PAD_CSI_HSYNC__CSI_HSYNC                      0x35 0x000
+#define MX27_PAD_CSI_HSYNC__UART5_RTS                      0x35 0x001
+#define MX27_PAD_CSI_HSYNC__GPIO2_21                       0x35 0x032
+#define MX27_PAD_USBH1_SUSP__USBH1_SUSP                    0x36 0x004
+#define MX27_PAD_USBH1_SUSP__GPIO2_22                      0x36 0x032
+#define MX27_PAD_USB_PWR__USB_PWR                          0x37 0x004
+#define MX27_PAD_USB_PWR__GPIO2_23                         0x37 0x032
+#define MX27_PAD_USB_OC_B__USB_OC_B                        0x38 0x000
+#define MX27_PAD_USB_OC_B__GPIO2_24                        0x38 0x032
+#define MX27_PAD_USBH1_RCV__USBH1_RCV                      0x39 0x004
+#define MX27_PAD_USBH1_RCV__GPIO2_25                       0x39 0x032
+#define MX27_PAD_USBH1_FS__USBH1_FS                        0x3a 0x004
+#define MX27_PAD_USBH1_FS__UART4_RTS                       0x3a 0x001
+#define MX27_PAD_USBH1_FS__GPIO2_26                        0x3a 0x032
+#define MX27_PAD_USBH1_OE_B__USBH1_OE_B                    0x3b 0x004
+#define MX27_PAD_USBH1_OE_B__GPIO2_27                      0x3b 0x032
+#define MX27_PAD_USBH1_TXDM__USBH1_TXDM                    0x3c 0x004
+#define MX27_PAD_USBH1_TXDM__UART4_TXD                     0x3c 0x005
+#define MX27_PAD_USBH1_TXDM__GPIO2_28                      0x3c 0x032
+#define MX27_PAD_USBH1_TXDP__USBH1_TXDP                    0x3d 0x004
+#define MX27_PAD_USBH1_TXDP__UART4_CTS                     0x3d 0x005
+#define MX27_PAD_USBH1_TXDP__GPIO2_29                      0x3d 0x032
+#define MX27_PAD_USBH1_RXDM__USBH1_RXDM                    0x3e 0x004
+#define MX27_PAD_USBH1_RXDM__GPIO2_30                      0x3e 0x032
+#define MX27_PAD_USBH1_RXDP__USBH1_RXDP                    0x3f 0x004
+#define MX27_PAD_USBH1_RXDP__UART4_RXD                     0x3f 0x001
+#define MX27_PAD_USBH1_RXDP__GPIO2_31                      0x3f 0x032
+#define MX27_PAD_I2C2_SDA__I2C2_SDA                        0x45 0x004
+#define MX27_PAD_I2C2_SDA__GPIO3_5                         0x45 0x032
+#define MX27_PAD_I2C2_SCL__I2C2_SCL                        0x46 0x004
+#define MX27_PAD_I2C2_SCL__GPIO3_6                         0x46 0x032
+#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5                0x47 0x004
+#define MX27_PAD_USBOTG_DATA5__GPIO3_7                     0x47 0x032
+#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6                0x48 0x004
+#define MX27_PAD_USBOTG_DATA6__GPIO3_8                     0x48 0x032
+#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0                0x49 0x004
+#define MX27_PAD_USBOTG_DATA0__GPIO3_9                     0x49 0x032
+#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2                0x4a 0x004
+#define MX27_PAD_USBOTG_DATA2__GPIO3_10                    0x4a 0x032
+#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1                0x4b 0x004
+#define MX27_PAD_USBOTG_DATA1__GPIO3_11                    0x4b 0x032
+#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4                0x4c 0x004
+#define MX27_PAD_USBOTG_DATA4__GPIO3_12                    0x4c 0x032
+#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3                0x4d 0x004
+#define MX27_PAD_USBOTG_DATA3__GPIO3_13                    0x4d 0x032
+#define MX27_PAD_TOUT__TOUT                                0x4e 0x004
+#define MX27_PAD_TOUT__GPIO3_14                            0x4e 0x032
+#define MX27_PAD_TIN__TIN                                  0x4f 0x000
+#define MX27_PAD_TIN__GPIO3_15                             0x4f 0x032
+#define MX27_PAD_SSI4_FS__SSI4_FS                          0x50 0x004
+#define MX27_PAD_SSI4_FS__GPIO3_16                         0x50 0x032
+#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT                    0x51 0x004
+#define MX27_PAD_SSI4_RXDAT__GPIO3_17                      0x51 0x032
+#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT                    0x52 0x004
+#define MX27_PAD_SSI4_TXDAT__GPIO3_18                      0x52 0x032
+#define MX27_PAD_SSI4_CLK__SSI4_CLK                        0x53 0x004
+#define MX27_PAD_SSI4_CLK__GPIO3_19                        0x53 0x032
+#define MX27_PAD_SSI1_FS__SSI1_FS                          0x54 0x004
+#define MX27_PAD_SSI1_FS__GPIO3_20                         0x54 0x032
+#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT                    0x55 0x004
+#define MX27_PAD_SSI1_RXDAT__GPIO3_21                      0x55 0x032
+#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT                    0x56 0x004
+#define MX27_PAD_SSI1_TXDAT__GPIO3_22                      0x56 0x032
+#define MX27_PAD_SSI1_CLK__SSI1_CLK                        0x57 0x004
+#define MX27_PAD_SSI1_CLK__GPIO3_23                        0x57 0x032
+#define MX27_PAD_SSI2_FS__SSI2_FS                          0x58 0x004
+#define MX27_PAD_SSI2_FS__GPT5_TOUT                        0x58 0x005
+#define MX27_PAD_SSI2_FS__GPIO3_24                         0x58 0x032
+#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT                    0x59 0x004
+#define MX27_PAD_SSI2_RXDAT__GPTS_TIN                      0x59 0x001
+#define MX27_PAD_SSI2_RXDAT__GPIO3_25                      0x59 0x032
+#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT                    0x5a 0x004
+#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT                     0x5a 0x005
+#define MX27_PAD_SSI2_TXDAT__GPIO3_26                      0x5a 0x032
+#define MX27_PAD_SSI2_CLK__SSI2_CLK                        0x5b 0x004
+#define MX27_PAD_SSI2_CLK__GPT4_TIN                        0x5b 0x001
+#define MX27_PAD_SSI2_CLK__GPIO3_27                        0x5b 0x032
+#define MX27_PAD_SSI3_FS__SSI3_FS                          0x5c 0x004
+#define MX27_PAD_SSI3_FS__SLCDC2_D0                        0x5c 0x001
+#define MX27_PAD_SSI3_FS__GPIO3_28                         0x5c 0x032
+#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT                    0x5d 0x004
+#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS                     0x5d 0x001
+#define MX27_PAD_SSI3_RXDAT__GPIO3_29                      0x5d 0x032
+#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT                    0x5e 0x004
+#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS                     0x5e 0x001
+#define MX27_PAD_SSI3_TXDAT__GPIO3_30                      0x5e 0x032
+#define MX27_PAD_SSI3_CLK__SSI3_CLK                        0x5f 0x004
+#define MX27_PAD_SSI3_CLK__SLCDC2_CLK                      0x5f 0x001
+#define MX27_PAD_SSI3_CLK__GPIO3_31                        0x5f 0x032
+#define MX27_PAD_SD3_CMD__SD3_CMD                          0x60 0x004
+#define MX27_PAD_SD3_CMD__FEC_TXD0                         0x60 0x006
+#define MX27_PAD_SD3_CMD__GPIO4_0                          0x60 0x032
+#define MX27_PAD_SD3_CLK__SD3_CLK                          0x61 0x004
+#define MX27_PAD_SD3_CLK__ETMTRACEPKT15                    0x61 0x005
+#define MX27_PAD_SD3_CLK__FEC_TXD1                         0x61 0x006
+#define MX27_PAD_SD3_CLK__GPIO4_1                          0x61 0x032
+#define MX27_PAD_ATA_DATA0__ATA_DATA0                      0x62 0x004
+#define MX27_PAD_ATA_DATA0__SD3_D0                         0x62 0x005
+#define MX27_PAD_ATA_DATA0__FEC_TXD2                       0x62 0x006
+#define MX27_PAD_ATA_DATA0__GPIO4_2                        0x62 0x032
+#define MX27_PAD_ATA_DATA1__ATA_DATA1                      0x63 0x004
+#define MX27_PAD_ATA_DATA1__SD3_D1                         0x63 0x005
+#define MX27_PAD_ATA_DATA1__FEC_TXD3                       0x63 0x006
+#define MX27_PAD_ATA_DATA1__GPIO4_3                        0x63 0x032
+#define MX27_PAD_ATA_DATA2__ATA_DATA2                      0x64 0x004
+#define MX27_PAD_ATA_DATA2__SD3_D2                         0x64 0x005
+#define MX27_PAD_ATA_DATA2__FEC_RX_ER                      0x64 0x002
+#define MX27_PAD_ATA_DATA2__GPIO4_4                        0x64 0x032
+#define MX27_PAD_ATA_DATA3__ATA_DATA3                      0x65 0x004
+#define MX27_PAD_ATA_DATA3__SD3_D3                         0x65 0x005
+#define MX27_PAD_ATA_DATA3__FEC_RXD1                       0x65 0x002
+#define MX27_PAD_ATA_DATA3__GPIO4_5                        0x65 0x032
+#define MX27_PAD_ATA_DATA4__ATA_DATA4                      0x66 0x004
+#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14                  0x66 0x005
+#define MX27_PAD_ATA_DATA4__FEC_RXD2                       0x66 0x002
+#define MX27_PAD_ATA_DATA4__GPIO4_6                        0x66 0x032
+#define MX27_PAD_ATA_DATA5__ATA_DATA5                      0x67 0x004
+#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13                  0x67 0x005
+#define MX27_PAD_ATA_DATA5__FEC_RXD3                       0x67 0x002
+#define MX27_PAD_ATA_DATA5__GPIO4_7                        0x67 0x032
+#define MX27_PAD_ATA_DATA6__ATA_DATA6                      0x68 0x004
+#define MX27_PAD_ATA_DATA6__FEC_MDIO                       0x68 0x005
+#define MX27_PAD_ATA_DATA6__GPIO4_8                        0x68 0x032
+#define MX27_PAD_ATA_DATA7__ATA_DATA7                      0x69 0x004
+#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12                  0x69 0x005
+#define MX27_PAD_ATA_DATA7__FEC_MDC                        0x69 0x006
+#define MX27_PAD_ATA_DATA7__GPIO4_9                        0x69 0x032
+#define MX27_PAD_ATA_DATA8__ATA_DATA8                      0x6a 0x004
+#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11                  0x6a 0x005
+#define MX27_PAD_ATA_DATA8__FEC_CRS                        0x6a 0x002
+#define MX27_PAD_ATA_DATA8__GPIO4_10                       0x6a 0x032
+#define MX27_PAD_ATA_DATA9__ATA_DATA9                      0x6b 0x004
+#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10                  0x6b 0x005
+#define MX27_PAD_ATA_DATA9__FEC_TX_CLK                     0x6b 0x002
+#define MX27_PAD_ATA_DATA9__GPIO4_11                       0x6b 0x032
+#define MX27_PAD_ATA_DATA10__ATA_DATA10                    0x6c 0x004
+#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9                  0x6c 0x005
+#define MX27_PAD_ATA_DATA10__FEC_RXD0                      0x6c 0x002
+#define MX27_PAD_ATA_DATA10__GPIO4_12                      0x6c 0x032
+#define MX27_PAD_ATA_DATA11__ATA_DATA11                    0x6d 0x004
+#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8                  0x6d 0x005
+#define MX27_PAD_ATA_DATA11__FEC_RX_DV                     0x6d 0x002
+#define MX27_PAD_ATA_DATA11__GPIO4_13                      0x6d 0x032
+#define MX27_PAD_ATA_DATA12__ATA_DATA12                    0x6e 0x004
+#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7                  0x6e 0x005
+#define MX27_PAD_ATA_DATA12__FEC_RX_CLK                    0x6e 0x002
+#define MX27_PAD_ATA_DATA12__GPIO4_14                      0x6e 0x032
+#define MX27_PAD_ATA_DATA13__ATA_DATA13                    0x6f 0x004
+#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6                  0x6f 0x005
+#define MX27_PAD_ATA_DATA13__FEC_COL                       0x6f 0x002
+#define MX27_PAD_ATA_DATA13__GPIO4_15                      0x6f 0x032
+#define MX27_PAD_ATA_DATA14__ATA_DATA14                    0x70 0x004
+#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5                  0x70 0x005
+#define MX27_PAD_ATA_DATA14__FEC_TX_ER                     0x70 0x006
+#define MX27_PAD_ATA_DATA14__GPIO4_16                      0x70 0x032
+#define MX27_PAD_I2C_DATA__I2C_DATA                        0x71 0x004
+#define MX27_PAD_I2C_DATA__GPIO4_17                        0x71 0x032
+#define MX27_PAD_I2C_CLK__I2C_CLK                          0x72 0x004
+#define MX27_PAD_I2C_CLK__GPIO4_18                         0x72 0x032
+#define MX27_PAD_CSPI2_SS2__CSPI2_SS2                      0x73 0x004
+#define MX27_PAD_CSPI2_SS2__USBH2_DATA4                    0x73 0x005
+#define MX27_PAD_CSPI2_SS2__GPIO4_19                       0x73 0x032
+#define MX27_PAD_CSPI2_SS1__CSPI2_SS1                      0x74 0x004
+#define MX27_PAD_CSPI2_SS1__USBH2_DATA3                    0x74 0x005
+#define MX27_PAD_CSPI2_SS1__GPIO4_20                       0x74 0x032
+#define MX27_PAD_CSPI2_SS0__CSPI2_SS0                      0x75 0x004
+#define MX27_PAD_CSPI2_SS0__USBH2_DATA6                    0x75 0x005
+#define MX27_PAD_CSPI2_SS0__GPIO4_21                       0x75 0x032
+#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK                    0x76 0x004
+#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0                   0x76 0x005
+#define MX27_PAD_CSPI2_SCLK__GPIO4_22                      0x76 0x032
+#define MX27_PAD_CSPI2_MISO__CSPI2_MISO                    0x77 0x004
+#define MX27_PAD_CSPI2_MISO__USBH2_DATA2                   0x77 0x005
+#define MX27_PAD_CSPI2_MISO__GPIO4_23                      0x77 0x032
+#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI                    0x78 0x004
+#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1                   0x78 0x005
+#define MX27_PAD_CSPI2_MOSI__GPIO4_24                      0x78 0x032
+#define MX27_PAD_CSPI1_RDY__CSPI1_RDY                      0x79 0x000
+#define MX27_PAD_CSPI1_RDY__GPIO4_25                       0x79 0x032
+#define MX27_PAD_CSPI1_SS2__CSPI1_SS2                      0x7a 0x004
+#define MX27_PAD_CSPI1_SS2__USBH2_DATA5                    0x7a 0x005
+#define MX27_PAD_CSPI1_SS2__GPIO4_26                       0x7a 0x032
+#define MX27_PAD_CSPI1_SS1__CSPI1_SS1                      0x7b 0x004
+#define MX27_PAD_CSPI1_SS1__GPIO4_27                       0x7b 0x032
+#define MX27_PAD_CSPI1_SS0__CSPI1_SS0                      0x7c 0x004
+#define MX27_PAD_CSPI1_SS0__GPIO4_28                       0x7c 0x032
+#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK                    0x7d 0x004
+#define MX27_PAD_CSPI1_SCLK__GPIO4_29                      0x7d 0x032
+#define MX27_PAD_CSPI1_MISO__CSPI1_MISO                    0x7e 0x004
+#define MX27_PAD_CSPI1_MISO__GPIO4_30                      0x7e 0x032
+#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI                    0x7f 0x004
+#define MX27_PAD_CSPI1_MOSI__GPIO4_31                      0x7f 0x032
+#define MX27_PAD_USBOTG_NXT__USBOTG_NXT                    0x80 0x000
+#define MX27_PAD_USBOTG_NXT__KP_COL6A                      0x80 0x005
+#define MX27_PAD_USBOTG_NXT__GPIO5_0                       0x80 0x032
+#define MX27_PAD_USBOTG_STP__USBOTG_STP                    0x81 0x004
+#define MX27_PAD_USBOTG_STP__KP_ROW6A                      0x81 0x005
+#define MX27_PAD_USBOTG_STP__GPIO5_1                       0x81 0x032
+#define MX27_PAD_USBOTG_DIR__USBOTG_DIR                    0x82 0x000
+#define MX27_PAD_USBOTG_DIR__KP_ROW7A                      0x82 0x005
+#define MX27_PAD_USBOTG_DIR__GPIO5_2                       0x82 0x032
+#define MX27_PAD_UART2_CTS__UART2_CTS                      0x83 0x004
+#define MX27_PAD_UART2_CTS__KP_COL7                        0x83 0x005
+#define MX27_PAD_UART2_CTS__GPIO5_3                        0x83 0x032
+#define MX27_PAD_UART2_RTS__UART2_RTS                      0x84 0x000
+#define MX27_PAD_UART2_RTS__KP_ROW7                        0x84 0x005
+#define MX27_PAD_UART2_RTS__GPIO5_4                        0x84 0x032
+#define MX27_PAD_PWMO__PWMO                                0x85 0x004
+#define MX27_PAD_PWMO__GPIO5_5                             0x85 0x032
+#define MX27_PAD_UART2_TXD__UART2_TXD                      0x86 0x004
+#define MX27_PAD_UART2_TXD__KP_COL6                        0x86 0x005
+#define MX27_PAD_UART2_TXD__GPIO5_6                        0x86 0x032
+#define MX27_PAD_UART2_RXD__UART2_RXD                      0x87 0x000
+#define MX27_PAD_UART2_RXD__KP_ROW6                        0x87 0x005
+#define MX27_PAD_UART2_RXD__GPIO5_7                        0x87 0x032
+#define MX27_PAD_UART3_TXD__UART3_TXD                      0x88 0x004
+#define MX27_PAD_UART3_TXD__GPIO5_8                        0x88 0x032
+#define MX27_PAD_UART3_RXD__UART3_RXD                      0x89 0x000
+#define MX27_PAD_UART3_RXD__GPIO5_9                        0x89 0x032
+#define MX27_PAD_UART3_CTS__UART3_CTS                      0x8a 0x004
+#define MX27_PAD_UART3_CTS__GPIO5_10                       0x8a 0x032
+#define MX27_PAD_UART3_RTS__UART3_RTS                      0x8b 0x000
+#define MX27_PAD_UART3_RTS__GPIO5_11                       0x8b 0x032
+#define MX27_PAD_UART1_TXD__UART1_TXD                      0x8c 0x004
+#define MX27_PAD_UART1_TXD__GPIO5_12                       0x8c 0x032
+#define MX27_PAD_UART1_RXD__UART1_RXD                      0x8d 0x000
+#define MX27_PAD_UART1_RXD__GPIO5_13                       0x8d 0x032
+#define MX27_PAD_UART1_CTS__UART1_CTS                      0x8e 0x004
+#define MX27_PAD_UART1_CTS__GPIO5_14                       0x8e 0x032
+#define MX27_PAD_UART1_RTS__UART1_RTS                      0x8f 0x000
+#define MX27_PAD_UART1_RTS__GPIO5_15                       0x8f 0x032
+#define MX27_PAD_RTCK__RTCK                                0x90 0x004
+#define MX27_PAD_RTCK__OWIRE                               0x90 0x005
+#define MX27_PAD_RTCK__GPIO5_16                            0x90 0x032
+#define MX27_PAD_RESET_OUT_B__RESET_OUT_B                  0x91 0x004
+#define MX27_PAD_RESET_OUT_B__GPIO5_17                     0x91 0x032
+#define MX27_PAD_SD1_D0__SD1_D0                            0x92 0x004
+#define MX27_PAD_SD1_D0__CSPI3_MISO                        0x92 0x001
+#define MX27_PAD_SD1_D0__GPIO5_18                          0x92 0x032
+#define MX27_PAD_SD1_D1__SD1_D1                            0x93 0x004
+#define MX27_PAD_SD1_D1__GPIO5_19                          0x93 0x032
+#define MX27_PAD_SD1_D2__SD1_D2                            0x94 0x004
+#define MX27_PAD_SD1_D2__GPIO5_20                          0x94 0x032
+#define MX27_PAD_SD1_D3__SD1_D3                            0x95 0x004
+#define MX27_PAD_SD1_D3__CSPI3_SS                          0x95 0x005
+#define MX27_PAD_SD1_D3__GPIO5_21                          0x95 0x032
+#define MX27_PAD_SD1_CMD__SD1_CMD                          0x96 0x004
+#define MX27_PAD_SD1_CMD__CSPI3_MOSI                       0x96 0x005
+#define MX27_PAD_SD1_CMD__GPIO5_22                         0x96 0x032
+#define MX27_PAD_SD1_CLK__SD1_CLK                          0x97 0x004
+#define MX27_PAD_SD1_CLK__CSPI3_SCLK                       0x97 0x005
+#define MX27_PAD_SD1_CLK__GPIO5_23                         0x97 0x032
+#define MX27_PAD_USBOTG_CLK__USBOTG_CLK                    0x98 0x000
+#define MX27_PAD_USBOTG_CLK__GPIO5_24                      0x98 0x032
+#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7                0x99 0x004
+#define MX27_PAD_USBOTG_DATA7__GPIO5_25                    0x99 0x032
+#define MX27_PAD_NFRB__NFRB                                0xa0 0x000
+#define MX27_PAD_NFRB__ETMTRACEPKT3                        0xa0 0x005
+#define MX27_PAD_NFRB__GPIO6_0                             0xa0 0x032
+#define MX27_PAD_NFCLE__NFCLE                              0xa1 0x004
+#define MX27_PAD_NFCLE__ETMTRACEPKT0                       0xa1 0x005
+#define MX27_PAD_NFCLE__GPIO6_1                            0xa1 0x032
+#define MX27_PAD_NFWP_B__NFWP_B                            0xa2 0x004
+#define MX27_PAD_NFWP_B__ETMTRACEPKT1                      0xa2 0x005
+#define MX27_PAD_NFWP_B__GPIO6_2                           0xa2 0x032
+#define MX27_PAD_NFCE_B__NFCE_B                            0xa3 0x004
+#define MX27_PAD_NFCE_B__ETMTRACEPKT2                      0xa3 0x005
+#define MX27_PAD_NFCE_B__GPIO6_3                           0xa3 0x032
+#define MX27_PAD_NFALE__NFALE                              0xa4 0x004
+#define MX27_PAD_NFALE__ETMPIPESTAT0                       0xa4 0x005
+#define MX27_PAD_NFALE__GPIO6_4                            0xa4 0x032
+#define MX27_PAD_NFRE_B__NFRE_B                            0xa5 0x004
+#define MX27_PAD_NFRE_B__ETMPIPESTAT1                      0xa5 0x005
+#define MX27_PAD_NFRE_B__GPIO6_5                           0xa5 0x032
+#define MX27_PAD_NFWE_B__NFWE_B                            0xa6 0x004
+#define MX27_PAD_NFWE_B__ETMPIPESTAT2                      0xa6 0x005
+#define MX27_PAD_NFWE_B__GPIO6_6                           0xa6 0x032
+#define MX27_PAD_PC_POE__PC_POE                            0xa7 0x004
+#define MX27_PAD_PC_POE__ATA_BUFFER_EN                     0xa7 0x005
+#define MX27_PAD_PC_POE__GPIO6_7                           0xa7 0x032
+#define MX27_PAD_PC_RW_B__PC_RW_B                          0xa8 0x004
+#define MX27_PAD_PC_RW_B__ATA_IORDY                        0xa8 0x001
+#define MX27_PAD_PC_RW_B__GPIO6_8                          0xa8 0x032
+#define MX27_PAD_IOIS16__IOIS16                            0xa9 0x000
+#define MX27_PAD_IOIS16__ATA_INTRQ                         0xa9 0x001
+#define MX27_PAD_IOIS16__GPIO6_9                           0xa9 0x032
+#define MX27_PAD_PC_RST__PC_RST                            0xaa 0x004
+#define MX27_PAD_PC_RST__ATA_RESET_B                       0xaa 0x005
+#define MX27_PAD_PC_RST__GPIO6_10                          0xaa 0x032
+#define MX27_PAD_PC_BVD2__PC_BVD2                          0xab 0x000
+#define MX27_PAD_PC_BVD2__ATA_DMACK                        0xab 0x005
+#define MX27_PAD_PC_BVD2__GPIO6_11                         0xab 0x032
+#define MX27_PAD_PC_BVD1__PC_BVD1                          0xac 0x000
+#define MX27_PAD_PC_BVD1__ATA_DMARQ                        0xac 0x001
+#define MX27_PAD_PC_BVD1__GPIO6_12                         0xac 0x032
+#define MX27_PAD_PC_VS2__PC_VS2                            0xad 0x000
+#define MX27_PAD_PC_VS2__ATA_DA0                           0xad 0x005
+#define MX27_PAD_PC_VS2__GPIO6_13                          0xad 0x032
+#define MX27_PAD_PC_VS1__PC_VS1                            0xae 0x000
+#define MX27_PAD_PC_VS1__ATA_DA1                           0xae 0x005
+#define MX27_PAD_PC_VS1__GPIO6_14                          0xae 0x032
+#define MX27_PAD_CLKO__CLKO                                0xaf 0x004
+#define MX27_PAD_CLKO__GPIO6_15                            0xaf 0x032
+#define MX27_PAD_PC_PWRON__PC_PWRON                        0xb0 0x000
+#define MX27_PAD_PC_PWRON__ATA_DA2                         0xb0 0x005
+#define MX27_PAD_PC_PWRON__GPIO6_16                        0xb0 0x032
+#define MX27_PAD_PC_READY__PC_READY                        0xb1 0x000
+#define MX27_PAD_PC_READY__ATA_CS0                         0xb1 0x005
+#define MX27_PAD_PC_READY__GPIO6_17                        0xb1 0x032
+#define MX27_PAD_PC_WAIT_B__PC_WAIT_B                      0xb2 0x000
+#define MX27_PAD_PC_WAIT_B__ATA_CS1                        0xb2 0x005
+#define MX27_PAD_PC_WAIT_B__GPIO6_18                       0xb2 0x032
+#define MX27_PAD_PC_CD2_B__PC_CD2_B                        0xb3 0x000
+#define MX27_PAD_PC_CD2_B__ATA_DIOW                        0xb3 0x005
+#define MX27_PAD_PC_CD2_B__GPIO6_19                        0xb3 0x032
+#define MX27_PAD_PC_CD1_B__PC_CD1_B                        0xb4 0x000
+#define MX27_PAD_PC_CD1_B__ATA_DIOR                        0xb4 0x005
+#define MX27_PAD_PC_CD1_B__GPIO6_20                        0xb4 0x032
+#define MX27_PAD_CS4_B__CS4_B                              0xb5 0x004
+#define MX27_PAD_CS4_B__ETMTRACESYNC                       0xb5 0x005
+#define MX27_PAD_CS4_B__GPIO6_21                           0xb5 0x032
+#define MX27_PAD_CS5_B__CS5_B                              0xb6 0x004
+#define MX27_PAD_CS5_B__ETMTRACECLK                        0xb6 0x005
+#define MX27_PAD_CS5_B__GPIO6_22                           0xb6 0x032
+#define MX27_PAD_ATA_DATA15__ATA_DATA15                    0xb7 0x004
+#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4                  0xb7 0x005
+#define MX27_PAD_ATA_DATA15__FEC_TX_EN                     0xb7 0x006
+#define MX27_PAD_ATA_DATA15__GPIO6_23                      0xb7 0x032
+
+#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/src/arm/imx28-duckbill.dts b/src/arm/imx28-duckbill.dts
new file mode 100644
index 000000000000..ce1a7effba37
--- /dev/null
+++ b/src/arm/imx28-duckbill.dts
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill";
+	compatible = "i2se,duckbill", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_a: led_gpio@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__GPIO_3_4
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-supply = <&reg_3p3v>;
+			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a>;
+
+		status {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		failure {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/src/arm/imx28-eukrea-mbmx283lc.dts b/src/arm/imx28-eukrea-mbmx283lc.dts
new file mode 100644
index 000000000000..7c1572c5a4fb
--- /dev/null
+++ b/src/arm/imx28-eukrea-mbmx283lc.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
+ */
+
+/dts-v1/;
+#include "imx28-eukrea-mbmx28lc.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX283LC";
+	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl{
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283>;
+
+	hog_pins_cpuimx283: hog-cpuimx283@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/src/arm/imx28-eukrea-mbmx287lc.dts b/src/arm/imx28-eukrea-mbmx287lc.dts
new file mode 100644
index 000000000000..e773144e1e03
--- /dev/null
+++ b/src/arm/imx28-eukrea-mbmx287lc.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
+ */
+
+#include "imx28-eukrea-mbmx283lc.dts"
+
+/ {
+	model = "Eukrea Electromatique MBMX287LC";
+	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
+	hog_pins_cpuimx287: hog-cpuimx287@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/src/arm/imx28-eukrea-mbmx28lc.dtsi b/src/arm/imx28-eukrea-mbmx28lc.dtsi
new file mode 100644
index 000000000000..927b391d2058
--- /dev/null
+++ b/src/arm/imx28-eukrea-mbmx28lc.dtsi
@@ -0,0 +1,326 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX28LC";
+	compatible = "eukrea,mbmx28lc", "fsl,imx28";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 1000000>;
+		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
+		default-brightness-level = <10>;
+	};
+
+	button-sw3 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
+
+		sw3 {
+			label = "SW3";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	button-sw4 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
+
+		sw4 {
+			label = "SW4";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	led-d6 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
+
+		led1 {
+			label = "d6";
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-d7 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
+
+		led1 {
+			label = "d7";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_lcd_3v3: regulator@1 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb0_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-mbmx28lc-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		model = "43WVF1G-0";
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9072000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <10>;
+				hfront-porch = <5>;
+				vback-porch = <8>;
+				vfront-porch = <8>;
+				hsync-len = <40>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D20__GPIO_1_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D18__GPIO_1_18
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D19__GPIO_1_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	cd-inverted;
+	status = "okay";
+};
+
+&usb0 {
+	disable-over-current;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_b>;
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/src/arm/imx28-m28.dtsi b/src/arm/imx28-m28.dtsi
new file mode 100644
index 000000000000..759cc56253dd
--- /dev/null
+++ b/src/arm/imx28-m28.dtsi
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx28.dtsi"
+
+/ {
+	model = "DENX M28";
+	compatible = "denx,m28", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "bootloader";
+					reg = <0x00000000 0x00300000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "environment";
+					reg = <0x00300000 0x00080000>;
+				};
+
+				partition@2 {
+					label = "redundant-environment";
+					reg = <0x00380000 0x00080000>;
+				};
+
+				partition@3 {
+					label = "kernel";
+					reg = <0x00400000 0x00400000>;
+				};
+
+				partition@4 {
+					label = "filesystem";
+					reg = <0x00800000 0x0f800000>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				rtc: rtc@68 {
+					compatible = "stm,m41t62";
+					reg = <0x68>;
+				};
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/imx35-eukrea-cpuimx35.dtsi b/src/arm/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 000000000000..9c2b715ab8bf
--- /dev/null
+++ b/src/arm/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+	memory {
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio3 2 0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0x2 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x48>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
+				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
+				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX35_PAD_FEC_COL__FEC_COL		0x80000000
+				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
+				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
+				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
+				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
+				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
+				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
+				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
+				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
+				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
+				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
+				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
+				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
+			>;
+		};
+
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts b/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 000000000000..75b036700d31
--- /dev/null
+++ b/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bp1>;
+
+		bp1 {
+			label = "BP1";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led1>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx35-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 24>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
+				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
+				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
+				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
+			>;
+		};
+
+		pinctrl_bp1: bp1grp {
+			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
+			>;
+		};
+
+		pinctrl_led1: led1grp {
+			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
+		};
+
+		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
+			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
+				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
+				MX35_PAD_RTS2__UART2_RTS		0x1c5
+				MX35_PAD_CTS2__UART2_CTS		0x1c5
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/src/arm/imx35-pdk.dts b/src/arm/imx35-pdk.dts
new file mode 100644
index 000000000000..8d715523708f
--- /dev/null
+++ b/src/arm/imx35-pdk.dts
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx35.dtsi"
+
+/ {
+	model = "Freescale i.MX35 Product Development Kit";
+	compatible = "fsl,imx35-pdk", "fsl,imx35";
+
+	memory {
+		reg = <0x80000000 0x8000000>,
+		      <0x90000000 0x8000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx35-pdk {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
diff --git a/src/arm/imx35.dtsi b/src/arm/imx35.dtsi
new file mode 100644
index 000000000000..442e216ca9d9
--- /dev/null
+++ b/src/arm/imx35.dtsi
@@ -0,0 +1,384 @@
+/*
+ * Copyright 2012 Steffen Trumtrar, Pengutronix
+ *
+ * based on imx27.dtsi
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "imx35-pinfunc.h"
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1136";
+			device_type = "cpu";
+		};
+	};
+
+	avic: avic-interrupt-controller@68000000 {
+		compatible = "fsl,imx35-avic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x10000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&avic>;
+		ranges;
+
+		L2: l2-cache@30000000 {
+			compatible = "arm,l210-cache";
+			reg = <0x30000000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		aips1: aips@43f00000 {
+			compatible = "fsl,aips", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			i2c1: i2c@43f80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f80000 0x4000>;
+				clocks = <&clks 51>;
+				clock-names = "ipg_per";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f84000 0x4000>;
+				clocks = <&clks 53>;
+				clock-names = "ipg_per";
+				interrupts = <3>;
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				clocks = <&clks 9>, <&clks 70>;
+				clock-names = "ipg", "per";
+				interrupts = <45>;
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				clocks = <&clks 9>, <&clks 71>;
+				clock-names = "ipg", "per";
+				interrupts = <32>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f98000 0x4000>;
+				clocks = <&clks 52>;
+				clock-names = "ipg_per";
+				interrupts = <4>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@43fa0000 {
+				compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
+				reg = <0x43fa0000 0x4000>;
+				interrupts = <11>;
+				clocks = <&clks 68>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			spi1: cspi@43fa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-cspi";
+				reg = <0x43fa4000 0x4000>;
+				clocks = <&clks 35 &clks 35>;
+				clock-names = "ipg", "per";
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@43fac000 {
+				compatible = "fsl,imx35-iomuxc";
+				reg = <0x43fac000 0x4000>;
+			};
+		};
+
+		spba: spba-bus@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x100000>;
+			ranges;
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				clocks = <&clks 9>, <&clks 72>;
+				clock-names = "ipg", "per";
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			spi2: cspi@50010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-cspi";
+				reg = <0x50010000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 36 &clks 36>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			fec: fec@50038000 {
+				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
+				reg = <0x50038000 0x4000>;
+				clocks = <&clks 46>, <&clks 8>;
+				clock-names = "ipg", "ahb";
+				interrupts = <57>;
+				status = "disabled";
+			};
+		};
+
+		aips2: aips@53f00000 {
+			compatible = "fsl,aips", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			clks: ccm@53f80000 {
+				compatible = "fsl,imx35-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>;
+				#clock-cells = <1>;
+			};
+
+			gpt: timer@53f90000 {
+				compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks 9>, <&clks 50>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <56>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			esdhc1: esdhc@53fb4000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fb4000 0x4000>;
+				interrupts = <7>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc2: esdhc@53fb8000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fb8000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 44>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc3: esdhc@53fbc000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 45>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			audmux: audmux@53fc4000 {
+				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
+				reg = <0x53fc4000 0x4000>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: sdma@53fd4000 {
+				compatible = "fsl,imx35-sdma";
+				reg = <0x53fd4000 0x4000>;
+				clocks = <&clks 9>, <&clks 65>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				interrupts = <34>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
+			};
+
+			wdog: wdog@53fdc000 {
+				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 74>;
+				clock-names = "";
+				interrupts = <55>;
+			};
+
+			can1: can@53fe4000 {
+				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fe4000 0x1000>;
+				clocks = <&clks 33>;
+				clock-names = "ipg";
+				interrupts = <43>;
+				status = "disabled";
+			};
+
+			can2: can@53fe8000 {
+				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fe8000 0x1000>;
+				clocks = <&clks 34>;
+				clock-names = "ipg";
+				interrupts = <44>;
+				status = "disabled";
+			};
+
+			usbotg: usb@53ff4000 {
+				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+				reg = <0x53ff4000 0x0200>;
+				interrupts = <37>;
+				clocks = <&clks 73>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbhost1: usb@53ff4400 {
+				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+				reg = <0x53ff4400 0x0200>;
+				interrupts = <35>;
+				clocks = <&clks 73>;
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53ff4600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx35-usbmisc";
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
+				reg = <0x53ff4600 0x00f>;
+			};
+		};
+
+		emi@80000000 { /* External Memory Interface */
+			compatible = "fsl,emi", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000000>;
+			ranges;
+
+			nfc: nand@bb000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
+				reg = <0xbb000000 0x2000>;
+				clocks = <&clks 29>;
+				clock-names = "";
+				interrupts = <33>;
+				status = "disabled";
+			};
+
+			weim: weim@b8002000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clocks = <&clks 0>;
+				compatible = "fsl,imx35-weim", "fsl,imx27-weim";
+				reg = <0xb8002000 0x1000>;
+				ranges = <
+					0 0 0xa0000000 0x8000000
+					1 0 0xa8000000 0x8000000
+					2 0 0xb0000000 0x2000000
+					3 0 0xb2000000 0x2000000
+					4 0 0xb4000000 0x2000000
+					5 0 0xb6000000 0x2000000
+				>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy@0 {
+			reg = <0>;
+			compatible = "usb-nop-xceiv";
+		};
+
+		usbphy1: usb-phy@1 {
+			reg = <1>;
+			compatible = "usb-nop-xceiv";
+		};
+	};
+};
diff --git a/src/arm/imx50-evk.dts b/src/arm/imx50-evk.dts
new file mode 100644
index 000000000000..1b22512c91bd
--- /dev/null
+++ b/src/arm/imx50-evk.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx50.dtsi"
+
+/ {
+	model = "Freescale i.MX50 Evaluation Kit";
+	compatible = "fsl,imx50-evk", "fsl,imx50";
+
+	memory {
+		reg = <0x70000000 0x80000000>;
+	};
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
+	status = "okay";
+
+	flash: m25p32@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p32", "m25p80";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "kernel";
+			reg = <0x100000 0x300000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 12 0>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx50-evk {
+		pinctrl_cspi: cspigrp {
+			fsl,pins = <
+				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
+				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
+				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
+				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
+				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
+				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
+				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
+				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
+				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
+				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
+				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
+				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
+				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
+				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
+				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
+				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
+				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbh2 {
+	status = "okay";
+};
+
+&usbh3 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
diff --git a/src/arm/imx50-pinfunc.h b/src/arm/imx50-pinfunc.h
new file mode 100644
index 000000000000..97e6e7f4ebdd
--- /dev/null
+++ b/src/arm/imx50-pinfunc.h
@@ -0,0 +1,923 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX50_PINFUNC_H
+#define __DTS_IMX50_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX50_PAD_KEY_COL0__KPP_COL_0				0x020 0x2cc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL0__GPIO4_0				0x020 0x2cc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL0__EIM_NANDF_CLE			0x020 0x2cc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL0__CTI_TRIGIN7				0x020 0x2cc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL0__USBPHY1_TXREADY			0x020 0x2cc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW0__KPP_ROW_0				0x024 0x2d0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW0__GPIO4_1				0x024 0x2d0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE			0x024 0x2d0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7			0x024 0x2d0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID			0x024 0x2d0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL1__KPP_COL_1				0x028 0x2d4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL1__GPIO4_2				0x028 0x2d4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL1__EIM_NANDF_CEN_0			0x028 0x2d4 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL1__CTI_TRIGOUT_ACK6			0x028 0x2d4 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL1__USBPHY1_RXACTIVE			0x028 0x2d4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW1__KPP_ROW_1				0x02c 0x2d8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW1__GPIO4_3				0x02c 0x2d8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL2__KPP_COL_1				0x030 0x2dc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL2__USBPHY1_SIECLOCK			0x030 0x2dc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW2__KPP_ROW_2				0x034 0x2e0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW2__GPIO4_5				0x034 0x2e0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL3__KPP_COL_2				0x038 0x2e4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
+#define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0
+#define MX50_PAD_KEY_COL3__USBPHY1_LINESTATE_1			0x038 0x2e4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW3__KPP_ROW_3				0x03c 0x2e8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW3__GPIO4_7				0x03c 0x2e8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW3__EIM_NANDF_DQS			0x03c 0x2e8 0x7b0 0x2 0x0
+#define MX50_PAD_KEY_ROW3__SDMA_EXT_EVENT_1			0x03c 0x2e8 0x7bc 0x6 0x0
+#define MX50_PAD_KEY_ROW3__USBPHY1_VBUSVALID			0x03c 0x2e8 0x000 0x7 0x0
+#define MX50_PAD_I2C1_SCL__I2C1_SCL				0x040 0x2ec 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SCL__GPIO6_18				0x040 0x2ec 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SCL__UART2_TXD_MUX			0x040 0x2ec 0x7cc 0x2 0x0
+#define MX50_PAD_I2C1_SDA__I2C1_SDA				0x044 0x2f0 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SDA__GPIO6_19				0x044 0x2f0 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SDA__UART2_RXD_MUX			0x044 0x2f0 0x7cc 0x2 0x1
+#define MX50_PAD_I2C2_SCL__I2C2_SCL				0x048 0x2f4 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SCL__GPIO6_20				0x048 0x2f4 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SCL__UART2_CTS				0x048 0x2f4 0x000 0x2 0x0
+#define MX50_PAD_I2C2_SDA__I2C2_SDA				0x04c 0x2f8 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SDA__GPIO6_21				0x04c 0x2f8 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SDA__UART2_RTS				0x04c 0x2f8 0x7c8 0x2 0x1
+#define MX50_PAD_I2C3_SCL__I2C3_SCL				0x050 0x2fc 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SCL__GPIO6_22				0x050 0x2fc 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SCL__FEC_MDC				0x050 0x2fc 0x000 0x2 0x0
+#define MX50_PAD_I2C3_SCL__GPC_PMIC_RDY				0x050 0x2fc 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SCL__GPT_CAPIN1				0x050 0x2fc 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SCL__OBSERVE_MUX_OBSRV_INT_OUT0		0x050 0x2fc 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SCL__USBOH1_USBOTG_OC			0x050 0x2fc 0x7e8 0x7 0x0
+#define MX50_PAD_I2C3_SDA__I2C3_SDA				0x054 0x300 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SDA__GPIO6_23				0x054 0x300 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SDA__FEC_MDIO				0x054 0x300 0x774 0x2 0x0
+#define MX50_PAD_I2C3_SDA__TZIC_PWRFAIL_INT			0x054 0x300 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SDA__SRTC_ALARM_DEB			0x054 0x300 0x000 0x4 0x0
+#define MX50_PAD_I2C3_SDA__GPT_CAPIN2				0x054 0x300 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SDA__OBSERVE_MUX_OBSRV_INT_OUT1		0x054 0x300 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SDA__USBOH1_USBOTG_PWR			0x054 0x300 0x000 0x7 0x0
+#define MX50_PAD_PWM1__PWM1_PWMO				0x058 0x304 0x000 0x0 0x0
+#define MX50_PAD_PWM1__GPIO6_24					0x058 0x304 0x000 0x1 0x0
+#define MX50_PAD_PWM1__USBOH1_USBOTG_OC				0x058 0x304 0x7e8 0x2 0x1
+#define MX50_PAD_PWM1__GPT_CMPOUT1				0x058 0x304 0x000 0x5 0x0
+#define MX50_PAD_PWM1__OBSERVE_MUX_OBSRV_INT_OUT2		0x058 0x304 0x000 0x6 0x0
+#define MX50_PAD_PWM1__SJC_FAIL					0x058 0x304 0x000 0x7 0x0
+#define MX50_PAD_PWM2__PWM2_PWMO				0x05c 0x308 0x000 0x0 0x0
+#define MX50_PAD_PWM2__GPIO6_25					0x05c 0x308 0x000 0x1 0x0
+#define MX50_PAD_PWM2__USBOH1_USBOTG_PWR			0x05c 0x308 0x000 0x2 0x0
+#define MX50_PAD_PWM2__GPT_CMPOUT2				0x05c 0x308 0x000 0x5 0x0
+#define MX50_PAD_PWM2__OBSERVE_MUX_OBSRV_INT_OUT3		0x05c 0x308 0x000 0x6 0x0
+#define MX50_PAD_PWM2__SRC_ANY_PU_RST				0x05c 0x308 0x000 0x7 0x0
+#define MX50_PAD_OWIRE__OWIRE_LINE				0x060 0x30c 0x000 0x0 0x0
+#define MX50_PAD_OWIRE__GPIO6_26				0x060 0x30c 0x000 0x1 0x0
+#define MX50_PAD_OWIRE__USBOH1_USBH1_OC				0x060 0x30c 0x000 0x2 0x0
+#define MX50_PAD_OWIRE__CCM_SSI_EXT1_CLK			0x060 0x30c 0x000 0x3 0x0
+#define MX50_PAD_OWIRE__EPDC_PWRIRQ				0x060 0x30c 0x000 0x4 0x0
+#define MX50_PAD_OWIRE__GPT_CMPOUT3				0x060 0x30c 0x000 0x5 0x0
+#define MX50_PAD_OWIRE__OBSERVE_MUX_OBSRV_INT_OUT4		0x060 0x30c 0x000 0x6 0x0
+#define MX50_PAD_OWIRE__SJC_JTAG_ACT				0x060 0x30c 0x000 0x7 0x0
+#define MX50_PAD_EPITO__EPIT1_EPITO				0x064 0x310 0x000 0x0 0x0
+#define MX50_PAD_EPITO__GPIO6_27				0x064 0x310 0x000 0x1 0x0
+#define MX50_PAD_EPITO__USBOH1_USBH1_PWR			0x064 0x310 0x000 0x2 0x0
+#define MX50_PAD_EPITO__CCM_SSI_EXT2_CLK			0x064 0x310 0x000 0x3 0x0
+#define MX50_PAD_EPITO__DPLLIP1_TOG_EN				0x064 0x310 0x000 0x4 0x0
+#define MX50_PAD_EPITO__GPT_CLK_IN				0x064 0x310 0x000 0x5 0x0
+#define MX50_PAD_EPITO__PMU_IRQ_B				0x064 0x310 0x000 0x6 0x0
+#define MX50_PAD_EPITO__SJC_DE_B				0x064 0x310 0x000 0x7 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_B				0x068 0x314 0x000 0x0 0x0
+#define MX50_PAD_WDOG__GPIO6_28					0x068 0x314 0x000 0x1 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_RST_B_DEB			0x068 0x314 0x000 0x2 0x0
+#define MX50_PAD_WDOG__CCM_XTAL32K				0x068 0x314 0x000 0x6 0x0
+#define MX50_PAD_WDOG__SJC_DONE					0x068 0x314 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXFS__AUDMUX_AUD3_TXFS			0x06c 0x318 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXFS__GPIO6_0				0x06c 0x318 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXFS__SRC_BT_FUSE_RSV_1			0x06c 0x318 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXFS__USBPHY1_DATAOUT_8			0x06c 0x318 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXC__AUDMUX_AUD3_TXC			0x070 0x31c 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXC__GPIO6_1				0x070 0x31c 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXC__SRC_BT_FUSE_RSV_0			0x070 0x31c 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXC__USBPHY1_DATAOUT_9			0x070 0x31c 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXD__AUDMUX_AUD3_TXD			0x074 0x320 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXD__GPIO6_2				0x074 0x320 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXD__CSPI_RDY				0x074 0x320 0x6e8 0x4 0x0
+#define MX50_PAD_SSI_TXD__USBPHY1_DATAOUT_10			0x074 0x320 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXD__AUDMUX_AUD3_RXD			0x078 0x324 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXD__GPIO6_3				0x078 0x324 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXD__CSPI_SS3				0x078 0x324 0x6f4 0x4 0x0
+#define MX50_PAD_SSI_RXD__USBPHY1_DATAOUT_11			0x078 0x324 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXFS__AUDMUX_AUD3_RXFS			0x07c 0x328 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXFS__GPIO6_4				0x07c 0x328 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXFS__UART5_TXD_MUX			0x07c 0x328 0x7e4 0x2 0x0
+#define MX50_PAD_SSI_RXFS__EIM_WEIM_D_6				0x07c 0x328 0x804 0x3 0x0
+#define MX50_PAD_SSI_RXFS__CSPI_SS2				0x07c 0x328 0x6f0 0x4 0x0
+#define MX50_PAD_SSI_RXFS__FEC_COL				0x07c 0x328 0x770 0x5 0x0
+#define MX50_PAD_SSI_RXFS__FEC_MDC				0x07c 0x328 0x000 0x6 0x0
+#define MX50_PAD_SSI_RXFS__USBPHY1_DATAOUT_12			0x07c 0x328 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXC__AUDMUX_AUD3_RXC			0x080 0x32c 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXC__GPIO6_5				0x080 0x32c 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXC__UART5_RXD_MUX				0x080 0x32c 0x7e4 0x2 0x1
+#define MX50_PAD_SSI_RXC__EIM_WEIM_D_7				0x080 0x32c 0x808 0x3 0x0
+#define MX50_PAD_SSI_RXC__CSPI_SS1				0x080 0x32c 0x6ec 0x4 0x0
+#define MX50_PAD_SSI_RXC__FEC_RX_CLK				0x080 0x32c 0x780 0x5 0x0
+#define MX50_PAD_SSI_RXC__FEC_MDIO				0x080 0x32c 0x774 0x6 0x1
+#define MX50_PAD_SSI_RXC__USBPHY1_DATAOUT_13			0x080 0x32c 0x000 0x7 0x0
+#define MX50_PAD_UART1_TXD__UART1_TXD_MUX			0x084 0x330 0x7c4 0x0 0x0
+#define MX50_PAD_UART1_TXD__GPIO6_6				0x084 0x330 0x000 0x1 0x0
+#define MX50_PAD_UART1_TXD__USBPHY1_DATAOUT_14			0x084 0x330 0x000 0x7 0x0
+#define MX50_PAD_UART1_RXD__UART1_RXD_MUX			0x088 0x334 0x7c4 0x0 0x1
+#define MX50_PAD_UART1_RXD__GPIO6_7				0x088 0x334 0x000 0x1 0x0
+#define MX50_PAD_UART1_RXD__USBPHY1_DATAOUT_15			0x088 0x334 0x000 0x7 0x0
+#define MX50_PAD_UART1_CTS__UART1_CTS				0x08c 0x338 0x000 0x0 0x0
+#define MX50_PAD_UART1_CTS__GPIO6_8				0x08c 0x338 0x000 0x1 0x0
+#define MX50_PAD_UART1_CTS__UART5_TXD_MUX			0x08c 0x338 0x7e4 0x2 0x2
+#define MX50_PAD_UART1_CTS__ESDHC4_DAT4				0x08c 0x338 0x760 0x4 0x0
+#define MX50_PAD_UART1_CTS__ESDHC4_CMD				0x08c 0x338 0x74c 0x5 0x0
+#define MX50_PAD_UART1_CTS__USBPHY2_DATAOUT_8			0x08c 0x338 0x000 0x7 0x0
+#define MX50_PAD_UART1_RTS__UART1_RTS				0x090 0x33c 0x7c0 0x0 0x3
+#define MX50_PAD_UART1_RTS__GPIO6_9				0x090 0x33c 0x000 0x1 0x0
+#define MX50_PAD_UART1_RTS__UART5_RXD_MUX			0x090 0x33c 0x7e4 0x2 0x3
+#define MX50_PAD_UART1_RTS__ESDHC4_DAT5				0x090 0x33c 0x764 0x4 0x0
+#define MX50_PAD_UART1_RTS__ESDHC4_CLK				0x090 0x33c 0x748 0x5 0x0
+#define MX50_PAD_UART1_RTS__USBPHY2_DATAOUT_9			0x090 0x33c 0x000 0x7 0x0
+#define MX50_PAD_UART2_TXD__UART2_TXD_MUX			0x094 0x340 0x7cc 0x0 0x2
+#define MX50_PAD_UART2_TXD__GPIO6_10				0x094 0x340 0x000 0x1 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT6				0x094 0x340 0x768 0x4 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT4				0x094 0x340 0x760 0x5 0x1
+#define MX50_PAD_UART2_TXD__USBPHY2_DATAOUT_10			0x094 0x340 0x000 0x7 0x0
+#define MX50_PAD_UART2_RXD__UART2_RXD_MUX			0x098 0x344 0x7cc 0x0 0x3
+#define MX50_PAD_UART2_RXD__GPIO6_11				0x098 0x344 0x000 0x1 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT7				0x098 0x344 0x76c 0x4 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT5				0x098 0x344 0x764 0x5 0x1
+#define MX50_PAD_UART2_RXD__USBPHY2_DATAOUT_11			0x098 0x344 0x000 0x7 0x0
+#define MX50_PAD_UART2_CTS__UART2_CTS				0x09c 0x348 0x000 0x0 0x0
+#define MX50_PAD_UART2_CTS__GPIO6_12				0x09c 0x348 0x000 0x1 0x0
+#define MX50_PAD_UART2_CTS__ESDHC4_CMD				0x09c 0x348 0x74c 0x4 0x1
+#define MX50_PAD_UART2_CTS__ESDHC4_DAT6				0x09c 0x348 0x768 0x5 0x1
+#define MX50_PAD_UART2_CTS__USBPHY2_DATAOUT_12			0x09c 0x348 0x000 0x7 0x0
+#define MX50_PAD_UART2_RTS__UART2_RTS				0x0a0 0x34c 0x7c8 0x0 0x2
+#define MX50_PAD_UART2_RTS__GPIO6_13				0x0a0 0x34c 0x000 0x1 0x0
+#define MX50_PAD_UART2_RTS__ESDHC4_CLK				0x0a0 0x34c 0x748 0x4 0x1
+#define MX50_PAD_UART2_RTS__ESDHC4_DAT7				0x0a0 0x34c 0x76c 0x5 0x1
+#define MX50_PAD_UART2_RTS__USBPHY2_DATAOUT_13			0x0a0 0x34c 0x000 0x7 0x0
+#define MX50_PAD_UART3_TXD__UART3_TXD_MUX			0x0a4 0x350 0x7d4 0x0 0x0
+#define MX50_PAD_UART3_TXD__GPIO6_14				0x0a4 0x350 0x000 0x1 0x0
+#define MX50_PAD_UART3_TXD__ESDHC1_DAT4				0x0a4 0x350 0x000 0x3 0x0
+#define MX50_PAD_UART3_TXD__ESDHC4_DAT0				0x0a4 0x350 0x000 0x4 0x0
+#define MX50_PAD_UART3_TXD__ESDHC2_WP				0x0a4 0x350 0x744 0x5 0x0
+#define MX50_PAD_UART3_TXD__EIM_WEIM_D_12			0x0a4 0x350 0x81c 0x6 0x0
+#define MX50_PAD_UART3_TXD__USBPHY2_DATAOUT_14			0x0a4 0x350 0x000 0x7 0x0
+#define MX50_PAD_UART3_RXD__UART3_RXD_MUX			0x0a8 0x354 0x7d4 0x0 0x1
+#define MX50_PAD_UART3_RXD__GPIO6_15				0x0a8 0x354 0x000 0x1 0x0
+#define MX50_PAD_UART3_RXD__ESDHC1_DAT5				0x0a8 0x354 0x000 0x3 0x0
+#define MX50_PAD_UART3_RXD__ESDHC4_DAT1				0x0a8 0x354 0x754 0x4 0x0
+#define MX50_PAD_UART3_RXD__ESDHC2_CD				0x0a8 0x354 0x740 0x5 0x0
+#define MX50_PAD_UART3_RXD__EIM_WEIM_D_13			0x0a8 0x354 0x820 0x6 0x0
+#define MX50_PAD_UART3_RXD__USBPHY2_DATAOUT_15			0x0a8 0x354 0x000 0x7 0x0
+#define MX50_PAD_UART4_TXD__UART4_TXD_MUX			0x0ac 0x358 0x7dc 0x0 0x0
+#define MX50_PAD_UART4_TXD__GPIO6_16				0x0ac 0x358 0x000 0x1 0x0
+#define MX50_PAD_UART4_TXD__UART3_CTS				0x0ac 0x358 0x7d0 0x2 0x0
+#define MX50_PAD_UART4_TXD__ESDHC1_DAT6				0x0ac 0x358 0x000 0x3 0x0
+#define MX50_PAD_UART4_TXD__ESDHC4_DAT2				0x0ac 0x358 0x758 0x4 0x0
+#define MX50_PAD_UART4_TXD__ESDHC2_LCTL				0x0ac 0x358 0x000 0x5 0x0
+#define MX50_PAD_UART4_TXD__EIM_WEIM_D_14			0x0ac 0x358 0x824 0x6 0x0
+#define MX50_PAD_UART4_RXD__UART4_RXD_MUX			0x0b0 0x35c 0x7dc 0x0 0x1
+#define MX50_PAD_UART4_RXD__GPIO6_17				0x0b0 0x35c 0x000 0x1 0x0
+#define MX50_PAD_UART4_RXD__UART3_RTS				0x0b0 0x35c 0x7d0 0x2 0x1
+#define MX50_PAD_UART4_RXD__ESDHC1_DAT7				0x0b0 0x35c 0x000 0x3 0x0
+#define MX50_PAD_UART4_RXD__ESDHC4_DAT3				0x0b0 0x35c 0x75c 0x4 0x0
+#define MX50_PAD_UART4_RXD__ESDHC1_LCTL				0x0b0 0x35c 0x000 0x5 0x0
+#define MX50_PAD_UART4_RXD__EIM_WEIM_D_15			0x0b0 0x35c 0x828 0x6 0x0
+#define MX50_PAD_CSPI_SCLK__CSPI_SCLK				0x0b4 0x360 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SCLK__GPIO4_8				0x0b4 0x360 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MOSI__CSPI_MOSI				0x0b8 0x364 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MOSI__GPIO4_9				0x0b8 0x364 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MISO__CSPI_MISO				0x0bc 0x368 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MISO__GPIO4_10				0x0bc 0x368 0x000 0x1 0x0
+#define MX50_PAD_CSPI_SS0__CSPI_SS0				0x0c0 0x36c 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SS0__GPIO4_11				0x0c0 0x36c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK			0x0c4 0x370 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SCLK__GPIO4_12				0x0c4 0x370 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY				0x0c4 0x370 0x6e8 0x2 0x1
+#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY			0x0c4 0x370 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SCLK__UART3_RTS				0x0c4 0x370 0x7d0 0x4 0x2
+#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE_6			0x0c4 0x370 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SCLK__EIM_WEIM_D_8			0x0c4 0x370 0x80c 0x7 0x0
+#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI			0x0c8 0x374 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MOSI__GPIO4_13				0x0c8 0x374 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1				0x0c8 0x374 0x6ec 0x2 0x1
+#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1			0x0c8 0x374 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MOSI__UART3_CTS				0x0c8 0x374 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE_7			0x0c8 0x374 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MOSI__EIM_WEIM_D_9			0x0c8 0x374 0x810 0x7 0x0
+#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO			0x0cc 0x378 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MISO__GPIO4_14				0x0cc 0x378 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MISO__CSPI_SS2				0x0cc 0x378 0x6f0 0x2 0x1
+#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2			0x0cc 0x378 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MISO__UART4_RTS				0x0cc 0x378 0x7d8 0x4 0x0
+#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE_8			0x0cc 0x378 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MISO__EIM_WEIM_D_10			0x0cc 0x378 0x814 0x7 0x0
+#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0				0x0d0 0x37c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SS0__GPIO4_15				0x0d0 0x37c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SS0__CSPI_SS3				0x0d0 0x37c 0x6f4 0x2 0x1
+#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3				0x0d0 0x37c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SS0__UART4_CTS				0x0d0 0x37c 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE_9			0x0d0 0x37c 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SS0__EIM_WEIM_D_11			0x0d0 0x37c 0x818 0x7 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK			0x0d4 0x380 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SCLK__GPIO4_16				0x0d4 0x380 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR_RWN			0x0d4 0x380 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY			0x0d4 0x380 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SCLK__UART5_RTS				0x0d4 0x380 0x7e0 0x4 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK			0x0d4 0x380 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_NANDF_CEN_4			0x0d4 0x380 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_WEIM_D_8			0x0d4 0x380 0x80c 0x7 0x1
+#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI			0x0d8 0x384 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MOSI__GPIO4_17				0x0d8 0x384 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RE_E			0x0d8 0x384 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1			0x0d8 0x384 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MOSI__UART5_CTS				0x0d8 0x384 0x7e0 0x4 0x1
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_ENABLE			0x0d8 0x384 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_NANDF_CEN_5			0x0d8 0x384 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_WEIM_D_9			0x0d8 0x384 0x810 0x7 0x1
+#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO			0x0dc 0x388 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MISO__GPIO4_18				0x0dc 0x388 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS				0x0dc 0x388 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2			0x0dc 0x388 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MISO__UART5_TXD_MUX			0x0dc 0x388 0x7e4 0x4 0x4
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC			0x0dc 0x388 0x73c 0x5 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_NANDF_CEN_6			0x0dc 0x388 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_WEIM_D_10			0x0dc 0x388 0x814 0x7 0x1
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0				0x0e0 0x38c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SS0__GPIO4_19				0x0e0 0x38c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS				0x0e0 0x38c 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS3				0x0e0 0x38c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SS0__UART5_RXD_MUX			0x0e0 0x38c 0x7e4 0x4 0x5
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC			0x0e0 0x38c 0x6f8 0x5 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_NANDF_CEN_7			0x0e0 0x38c 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_WEIM_D_11			0x0e0 0x38c 0x818 0x7 0x1
+#define MX50_PAD_SD1_CLK__ESDHC1_CLK				0x0e4 0x390 0x000 0x0 0x0
+#define MX50_PAD_SD1_CLK__GPIO5_0				0x0e4 0x390 0x000 0x1 0x0
+#define MX50_PAD_SD1_CLK__CCM_CLKO				0x0e4 0x390 0x000 0x7 0x0
+#define MX50_PAD_SD1_CMD__ESDHC1_CMD				0x0e8 0x394 0x000 0x0 0x0
+#define MX50_PAD_SD1_CMD__GPIO5_1				0x0e8 0x394 0x000 0x1 0x0
+#define MX50_PAD_SD1_CMD__CCM_CLKO2				0x0e8 0x394 0x000 0x7 0x0
+#define MX50_PAD_SD1_D0__ESDHC1_DAT0				0x0ec 0x398 0x000 0x0 0x0
+#define MX50_PAD_SD1_D0__GPIO5_2				0x0ec 0x398 0x000 0x1 0x0
+#define MX50_PAD_SD1_D0__CCM_PLL1_BYP				0x0ec 0x398 0x6dc 0x7 0x0
+#define MX50_PAD_SD1_D1__ESDHC1_DAT1				0x0f0 0x39c 0x000 0x0 0x0
+#define MX50_PAD_SD1_D1__GPIO5_3				0x0f0 0x39c 0x000 0x1 0x0
+#define MX50_PAD_SD1_D1__CCM_PLL2_BYP				0x0f0 0x39c 0x000 0x7 0x0
+#define MX50_PAD_SD1_D2__ESDHC1_DAT2				0x0f4 0x3a0 0x000 0x0 0x0
+#define MX50_PAD_SD1_D2__GPIO5_4				0x0f4 0x3a0 0x000 0x1 0x0
+#define MX50_PAD_SD1_D2__CCM_PLL3_BYP				0x0f4 0x3a0 0x6e4 0x7 0x0
+#define MX50_PAD_SD1_D3__ESDHC1_DAT3				0x0f8 0x3a4 0x000 0x0 0x0
+#define MX50_PAD_SD1_D3__GPIO5_5				0x0f8 0x3a4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__ESDHC2_CLK				0x0fc 0x3a8 0x000 0x0 0x0
+#define MX50_PAD_SD2_CLK__GPIO5_6				0x0fc 0x3a8 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__MSHC_SCLK				0x0fc 0x3a8 0x000 0x2 0x0
+#define MX50_PAD_SD2_CMD__ESDHC2_CMD				0x100 0x3ac 0x000 0x0 0x0
+#define MX50_PAD_SD2_CMD__GPIO5_7				0x100 0x3ac 0x000 0x1 0x0
+#define MX50_PAD_SD2_CMD__MSHC_BS				0x100 0x3ac 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__ESDHC2_DAT0				0x104 0x3b0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D0__GPIO5_8				0x104 0x3b0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D0__MSHC_DATA_0				0x104 0x3b0 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__KPP_COL_4				0x104 0x3b0 0x790 0x3 0x0
+#define MX50_PAD_SD2_D1__ESDHC2_DAT1				0x108 0x3b4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D1__GPIO5_9				0x108 0x3b4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D1__MSHC_DATA_1				0x108 0x3b4 0x000 0x2 0x0
+#define MX50_PAD_SD2_D1__KPP_ROW_4				0x108 0x3b4 0x7a0 0x3 0x0
+#define MX50_PAD_SD2_D2__ESDHC2_DAT2				0x10c 0x3b8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D2__GPIO5_10				0x10c 0x3b8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D2__MSHC_DATA_2				0x10c 0x3b8 0x000 0x2 0x0
+#define MX50_PAD_SD2_D2__KPP_COL_5				0x10c 0x3b8 0x794 0x3 0x0
+#define MX50_PAD_SD2_D3__ESDHC2_DAT3				0x110 0x3bc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D3__GPIO5_11				0x110 0x3bc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D3__MSHC_DATA_3				0x110 0x3bc 0x000 0x2 0x0
+#define MX50_PAD_SD2_D3__KPP_ROW_5				0x110 0x3bc 0x7a4 0x3 0x0
+#define MX50_PAD_SD2_D4__ESDHC2_DAT4				0x114 0x3c0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D4__GPIO5_12				0x114 0x3c0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D4__AUDMUX_AUD4_RXFS			0x114 0x3c0 0x6d0 0x2 0x0
+#define MX50_PAD_SD2_D4__KPP_COL_6				0x114 0x3c0 0x798 0x3 0x0
+#define MX50_PAD_SD2_D4__EIM_WEIM_D_0				0x114 0x3c0 0x7ec 0x4 0x0
+#define MX50_PAD_SD2_D4__CCM_CCM_OUT_0				0x114 0x3c0 0x000 0x7 0x0
+#define MX50_PAD_SD2_D5__ESDHC2_DAT5				0x118 0x3c4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D5__GPIO5_13				0x118 0x3c4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D5__AUDMUX_AUD4_RXC			0x118 0x3c4 0x6cc 0x2 0x0
+#define MX50_PAD_SD2_D5__KPP_ROW_6				0x118 0x3c4 0x7a8 0x3 0x0
+#define MX50_PAD_SD2_D5__EIM_WEIM_D_1				0x118 0x3c4 0x7f0 0x4 0x0
+#define MX50_PAD_SD2_D5__CCM_CCM_OUT_1				0x118 0x3c4 0x000 0x7 0x0
+#define MX50_PAD_SD2_D6__ESDHC2_DAT6				0x11c 0x3c8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D6__GPIO5_14				0x11c 0x3c8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D6__AUDMUX_AUD4_RXD			0x11c 0x3c8 0x6c4 0x2 0x0
+#define MX50_PAD_SD2_D6__KPP_COL_7				0x11c 0x3c8 0x79c 0x3 0x0
+#define MX50_PAD_SD2_D6__EIM_WEIM_D_2				0x11c 0x3c8 0x7f4 0x4 0x0
+#define MX50_PAD_SD2_D6__CCM_CCM_OUT_2				0x11c 0x3c8 0x000 0x7 0x0
+#define MX50_PAD_SD2_D7__ESDHC2_DAT7				0x120 0x3cc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D7__GPIO5_15				0x120 0x3cc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D7__AUDMUX_AUD4_TXFS			0x120 0x3cc 0x6d8 0x2 0x0
+#define MX50_PAD_SD2_D7__KPP_ROW_7				0x120 0x3cc 0x7ac 0x3 0x0
+#define MX50_PAD_SD2_D7__EIM_WEIM_D_3				0x120 0x3cc 0x7f8 0x4 0x0
+#define MX50_PAD_SD2_D7__CCM_STOP				0x120 0x3cc 0x000 0x7 0x0
+#define MX50_PAD_SD2_WP__ESDHC2_WP				0x124 0x3d0 0x744 0x0 0x1
+#define MX50_PAD_SD2_WP__GPIO5_16				0x124 0x3d0 0x000 0x1 0x0
+#define MX50_PAD_SD2_WP__AUDMUX_AUD4_TXD			0x124 0x3d0 0x6c8 0x2 0x0
+#define MX50_PAD_SD2_WP__EIM_WEIM_D_4				0x124 0x3d0 0x7fc 0x4 0x0
+#define MX50_PAD_SD2_WP__CCM_WAIT				0x124 0x3d0 0x000 0x7 0x0
+#define MX50_PAD_SD2_CD__ESDHC2_CD				0x128 0x3d4 0x740 0x0 0x1
+#define MX50_PAD_SD2_CD__GPIO5_17				0x128 0x3d4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CD__AUDMUX_AUD4_TXC			0x128 0x3d4 0x6d4 0x2 0x0
+#define MX50_PAD_SD2_CD__EIM_WEIM_D_5				0x128 0x3d4 0x800 0x4 0x0
+#define MX50_PAD_SD2_CD__CCM_REF_EN_B				0x128 0x3d4 0x000 0x7 0x0
+#define MX50_PAD_DISP_D0__ELCDIF_DAT_0				0x12c 0x40c 0x6fc 0x0 0x0
+#define MX50_PAD_DISP_D0__GPIO2_0				0x12c 0x40c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D0__FEC_TX_CLK				0x12c 0x40c 0x78c 0x2 0x0
+#define MX50_PAD_DISP_D0__EIM_WEIM_A_16				0x12c 0x40c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D0__SDMA_DEBUG_PC_0			0x12c 0x40c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D0__USBPHY1_VSTATUS_0			0x12c 0x40c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D1__ELCDIF_DAT_1				0x130 0x410 0x700 0x0 0x0
+#define MX50_PAD_DISP_D1__GPIO2_1				0x130 0x410 0x000 0x1 0x0
+#define MX50_PAD_DISP_D1__FEC_RX_ERR				0x130 0x410 0x788 0x2 0x0
+#define MX50_PAD_DISP_D1__EIM_WEIM_A_17				0x130 0x410 0x000 0x3 0x0
+#define MX50_PAD_DISP_D1__SDMA_DEBUG_PC_1			0x130 0x410 0x000 0x6 0x0
+#define MX50_PAD_DISP_D1__USBPHY1_VSTATUS_1			0x130 0x410 0x000 0x7 0x0
+#define MX50_PAD_DISP_D2__ELCDIF_DAT_2				0x134 0x414 0x704 0x0 0x0
+#define MX50_PAD_DISP_D2__GPIO2_2				0x134 0x414 0x000 0x1 0x0
+#define MX50_PAD_DISP_D2__FEC_RX_DV				0x134 0x414 0x784 0x2 0x0
+#define MX50_PAD_DISP_D2__EIM_WEIM_A_18				0x134 0x414 0x000 0x3 0x0
+#define MX50_PAD_DISP_D2__SDMA_DEBUG_PC_2			0x134 0x414 0x000 0x6 0x0
+#define MX50_PAD_DISP_D2__USBPHY1_VSTATUS_2			0x134 0x414 0x000 0x7 0x0
+#define MX50_PAD_DISP_D3__ELCDIF_DAT_3				0x138 0x418 0x708 0x0 0x0
+#define MX50_PAD_DISP_D3__GPIO2_3				0x138 0x418 0x000 0x1 0x0
+#define MX50_PAD_DISP_D3__FEC_RDATA_1				0x138 0x418 0x77c 0x2 0x0
+#define MX50_PAD_DISP_D3__EIM_WEIM_A_19				0x138 0x418 0x000 0x3 0x0
+#define MX50_PAD_DISP_D3__FEC_COL				0x138 0x418 0x770 0x4 0x1
+#define MX50_PAD_DISP_D3__SDMA_DEBUG_PC_3			0x138 0x418 0x000 0x6 0x0
+#define MX50_PAD_DISP_D3__USBPHY1_VSTATUS_3			0x138 0x418 0x000 0x7 0x0
+#define MX50_PAD_DISP_D4__ELCDIF_DAT_4				0x13c 0x41c 0x70c 0x0 0x0
+#define MX50_PAD_DISP_D4__GPIO2_4				0x13c 0x41c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D4__FEC_RDATA_0				0x13c 0x41c 0x778 0x2 0x0
+#define MX50_PAD_DISP_D4__EIM_WEIM_A_20				0x13c 0x41c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D4__SDMA_DEBUG_PC_4			0x13c 0x41c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D4__USBPHY1_VSTATUS_4			0x13c 0x41c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D5__ELCDIF_DAT_5				0x140 0x420 0x710 0x0 0x0
+#define MX50_PAD_DISP_D5__GPIO2_5				0x140 0x420 0x000 0x1 0x0
+#define MX50_PAD_DISP_D5__FEC_TX_EN				0x140 0x420 0x000 0x2 0x0
+#define MX50_PAD_DISP_D5__EIM_WEIM_A_21				0x140 0x420 0x000 0x3 0x0
+#define MX50_PAD_DISP_D5__SDMA_DEBUG_PC_5			0x140 0x420 0x000 0x6 0x0
+#define MX50_PAD_DISP_D5__USBPHY1_VSTATUS_5			0x140 0x420 0x000 0x7 0x0
+#define MX50_PAD_DISP_D6__ELCDIF_DAT_6				0x144 0x424 0x714 0x0 0x0
+#define MX50_PAD_DISP_D6__GPIO2_6				0x144 0x424 0x000 0x1 0x0
+#define MX50_PAD_DISP_D6__FEC_TDATA_1				0x144 0x424 0x000 0x2 0x0
+#define MX50_PAD_DISP_D6__EIM_WEIM_A_22				0x144 0x424 0x000 0x3 0x0
+#define MX50_PAD_DISP_D6__FEC_RX_CLK				0x144 0x424 0x780 0x4 0x1
+#define MX50_PAD_DISP_D6__SDMA_DEBUG_PC_6			0x144 0x424 0x000 0x6 0x0
+#define MX50_PAD_DISP_D6__USBPHY1_VSTATUS_6			0x144 0x424 0x000 0x7 0x0
+#define MX50_PAD_DISP_D7__ELCDIF_DAT_7				0x148 0x428 0x718 0x0 0x0
+#define MX50_PAD_DISP_D7__GPIO2_7				0x148 0x428 0x000 0x1 0x0
+#define MX50_PAD_DISP_D7__FEC_TDATA_0				0x148 0x428 0x000 0x2 0x0
+#define MX50_PAD_DISP_D7__EIM_WEIM_A_23				0x148 0x428 0x000 0x3 0x0
+#define MX50_PAD_DISP_D7__SDMA_DEBUG_PC_7			0x148 0x428 0x000 0x6 0x0
+#define MX50_PAD_DISP_D7__USBPHY1_VSTATUS_7			0x148 0x428 0x000 0x7 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_WR_RWN				0x14c 0x42c 0x000 0x0 0x0
+#define MX50_PAD_DISP_WR__GPIO2_16				0x14c 0x42c 0x000 0x1 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_DOTCLK				0x14c 0x42c 0x000 0x2 0x0
+#define MX50_PAD_DISP_WR__EIM_WEIM_A_24				0x14c 0x42c 0x000 0x3 0x0
+#define MX50_PAD_DISP_WR__SDMA_DEBUG_PC_8			0x14c 0x42c 0x000 0x6 0x0
+#define MX50_PAD_DISP_WR__USBPHY1_AVALID			0x14c 0x42c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_RD_E				0x150 0x430 0x000 0x0 0x0
+#define MX50_PAD_DISP_RD__GPIO2_19				0x150 0x430 0x000 0x1 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_ENABLE				0x150 0x430 0x000 0x2 0x0
+#define MX50_PAD_DISP_RD__EIM_WEIM_A_25				0x150 0x430 0x000 0x3 0x0
+#define MX50_PAD_DISP_RD__SDMA_DEBUG_PC_9			0x150 0x430 0x000 0x6 0x0
+#define MX50_PAD_DISP_RD__USBPHY1_BVALID			0x150 0x430 0x000 0x7 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_RS				0x154 0x434 0x000 0x0 0x0
+#define MX50_PAD_DISP_RS__GPIO2_17				0x154 0x434 0x000 0x1 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_VSYNC				0x154 0x434 0x73c 0x2 0x1
+#define MX50_PAD_DISP_RS__EIM_WEIM_A_26				0x154 0x434 0x000 0x3 0x0
+#define MX50_PAD_DISP_RS__SDMA_DEBUG_PC_10			0x154 0x434 0x000 0x6 0x0
+#define MX50_PAD_DISP_RS__USBPHY1_ENDSESSION			0x154 0x434 0x000 0x7 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_CS				0x158 0x438 0x000 0x0 0x0
+#define MX50_PAD_DISP_CS__GPIO2_21				0x158 0x438 0x000 0x1 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_HSYNC				0x158 0x438 0x6f8 0x2 0x1
+#define MX50_PAD_DISP_CS__EIM_WEIM_A_27				0x158 0x438 0x000 0x3 0x0
+#define MX50_PAD_DISP_CS__EIM_WEIM_CS_3				0x158 0x438 0x000 0x4 0x0
+#define MX50_PAD_DISP_CS__SDMA_DEBUG_PC_11			0x158 0x438 0x000 0x6 0x0
+#define MX50_PAD_DISP_CS__USBPHY1_IDDIG				0x158 0x438 0x000 0x7 0x0
+#define MX50_PAD_DISP_BUSY__ELCDIF_BUSY				0x15c 0x43c 0x6f8 0x0 0x2
+#define MX50_PAD_DISP_BUSY__GPIO2_18				0x15c 0x43c 0x000 0x1 0x0
+#define MX50_PAD_DISP_BUSY__EIM_WEIM_CS_3			0x15c 0x43c 0x000 0x4 0x0
+#define MX50_PAD_DISP_BUSY__SDMA_DEBUG_PC_12			0x15c 0x43c 0x000 0x6 0x0
+#define MX50_PAD_DISP_BUSY__USBPHY2_HOSTDISCONNECT		0x15c 0x43c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RESET__ELCDIF_RESET			0x160 0x440 0x000 0x0 0x0
+#define MX50_PAD_DISP_RESET__GPIO2_20				0x160 0x440 0x000 0x1 0x0
+#define MX50_PAD_DISP_RESET__EIM_WEIM_CS_3			0x160 0x440 0x000 0x4 0x0
+#define MX50_PAD_DISP_RESET__SDMA_DEBUG_PC_13			0x160 0x440 0x000 0x6 0x0
+#define MX50_PAD_DISP_RESET__USBPHY2_BISTOK			0x160 0x440 0x000 0x7 0x0
+#define MX50_PAD_SD3_CMD__ESDHC3_CMD				0x164 0x444 0x000 0x0 0x0
+#define MX50_PAD_SD3_CMD__GPIO5_18				0x164 0x444 0x000 0x1 0x0
+#define MX50_PAD_SD3_CMD__EIM_NANDF_WRN				0x164 0x444 0x000 0x2 0x0
+#define MX50_PAD_SD3_CMD__SSP_CMD				0x164 0x444 0x000 0x3 0x0
+#define MX50_PAD_SD3_CLK__ESDHC3_CLK				0x168 0x448 0x000 0x0 0x0
+#define MX50_PAD_SD3_CLK__GPIO5_19				0x168 0x448 0x000 0x1 0x0
+#define MX50_PAD_SD3_CLK__EIM_NANDF_RDN				0x168 0x448 0x000 0x2 0x0
+#define MX50_PAD_SD3_CLK__SSP_CLK				0x168 0x448 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__ESDHC3_DAT0				0x16c 0x44c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D0__GPIO5_20				0x16c 0x44c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D0__EIM_NANDF_D_4				0x16c 0x44c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D0__SSP_D0					0x16c 0x44c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__CCM_PLL1_BYP				0x16c 0x44c 0x6dc 0x7 0x1
+#define MX50_PAD_SD3_D1__ESDHC3_DAT1				0x170 0x450 0x000 0x0 0x0
+#define MX50_PAD_SD3_D1__GPIO5_21				0x170 0x450 0x000 0x1 0x0
+#define MX50_PAD_SD3_D1__EIM_NANDF_D_5				0x170 0x450 0x000 0x2 0x0
+#define MX50_PAD_SD3_D1__SSP_D1					0x170 0x450 0x000 0x3 0x0
+#define MX50_PAD_SD3_D1__CCM_PLL2_BYP				0x170 0x450 0x000 0x7 0x0
+#define MX50_PAD_SD3_D2__ESDHC3_DAT2				0x174 0x454 0x000 0x0 0x0
+#define MX50_PAD_SD3_D2__GPIO5_22				0x174 0x454 0x000 0x1 0x0
+#define MX50_PAD_SD3_D2__EIM_NANDF_D_6				0x174 0x454 0x000 0x2 0x0
+#define MX50_PAD_SD3_D2__SSP_D2					0x174 0x454 0x000 0x3 0x0
+#define MX50_PAD_SD3_D2__CCM_PLL3_BYP				0x174 0x454 0x6e4 0x7 0x1
+#define MX50_PAD_SD3_D3__ESDHC3_DAT3				0x178 0x458 0x000 0x0 0x0
+#define MX50_PAD_SD3_D3__GPIO5_23				0x178 0x458 0x000 0x1 0x0
+#define MX50_PAD_SD3_D3__EIM_NANDF_D_7				0x178 0x458 0x000 0x2 0x0
+#define MX50_PAD_SD3_D3__SSP_D3					0x178 0x458 0x000 0x3 0x0
+#define MX50_PAD_SD3_D4__ESDHC3_DAT4				0x17c 0x45c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D4__GPIO5_24				0x17c 0x45c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D4__EIM_NANDF_D_0				0x17c 0x45c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D4__SSP_D4					0x17c 0x45c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D5__ESDHC3_DAT5				0x180 0x460 0x000 0x0 0x0
+#define MX50_PAD_SD3_D5__GPIO5_25				0x180 0x460 0x000 0x1 0x0
+#define MX50_PAD_SD3_D5__EIM_NANDF_D_1				0x180 0x460 0x000 0x2 0x0
+#define MX50_PAD_SD3_D5__SSP_D5					0x180 0x460 0x000 0x3 0x0
+#define MX50_PAD_SD3_D6__ESDHC3_DAT6				0x184 0x464 0x000 0x0 0x0
+#define MX50_PAD_SD3_D6__GPIO5_26				0x184 0x464 0x000 0x1 0x0
+#define MX50_PAD_SD3_D6__EIM_NANDF_D_2				0x184 0x464 0x000 0x2 0x0
+#define MX50_PAD_SD3_D6__SSP_D6					0x184 0x464 0x000 0x3 0x0
+#define MX50_PAD_SD3_D7__ESDHC3_DAT7				0x188 0x468 0x000 0x0 0x0
+#define MX50_PAD_SD3_D7__GPIO5_27				0x188 0x468 0x000 0x1 0x0
+#define MX50_PAD_SD3_D7__EIM_NANDF_D_3				0x188 0x468 0x000 0x2 0x0
+#define MX50_PAD_SD3_D7__SSP_D7					0x188 0x468 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC3_WP				0x18c 0x46C 0x000 0x0 0x0
+#define MX50_PAD_SD3_WP__GPIO5_28				0x18c 0x46C 0x000 0x1 0x0
+#define MX50_PAD_SD3_WP__EIM_NANDF_RESETN			0x18c 0x46C 0x000 0x2 0x0
+#define MX50_PAD_SD3_WP__SSP_CD					0x18c 0x46C 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC4_LCTL				0x18c 0x46C 0x000 0x4 0x0
+#define MX50_PAD_SD3_WP__EIM_WEIM_CS_3				0x18c 0x46C 0x000 0x5 0x0
+#define MX50_PAD_DISP_D8__ELCDIF_DAT_8				0x190 0x470 0x71c 0x0 0x0
+#define MX50_PAD_DISP_D8__GPIO2_8				0x190 0x470 0x000 0x1 0x0
+#define MX50_PAD_DISP_D8__EIM_NANDF_CLE				0x190 0x470 0x000 0x2 0x0
+#define MX50_PAD_DISP_D8__ESDHC1_LCTL				0x190 0x470 0x000 0x3 0x0
+#define MX50_PAD_DISP_D8__ESDHC4_CMD				0x190 0x470 0x74c 0x4 0x2
+#define MX50_PAD_DISP_D8__KPP_COL_4				0x190 0x470 0x790 0x5 0x1
+#define MX50_PAD_DISP_D8__FEC_TX_CLK				0x190 0x470 0x78c 0x6 0x1
+#define MX50_PAD_DISP_D8__USBPHY1_DATAOUT_0			0x190 0x470 0x000 0x7 0x0
+#define MX50_PAD_DISP_D9__ELCDIF_DAT_9				0x194 0x474 0x720 0x0 0x0
+#define MX50_PAD_DISP_D9__GPIO2_9				0x194 0x474 0x000 0x1 0x0
+#define MX50_PAD_DISP_D9__EIM_NANDF_ALE				0x194 0x474 0x000 0x2 0x0
+#define MX50_PAD_DISP_D9__ESDHC2_LCTL				0x194 0x474 0x000 0x3 0x0
+#define MX50_PAD_DISP_D9__ESDHC4_CLK				0x194 0x474 0x748 0x4 0x2
+#define MX50_PAD_DISP_D9__KPP_ROW_4				0x194 0x474 0x7a0 0x5 0x1
+#define MX50_PAD_DISP_D9__FEC_RX_ER				0x194 0x474 0x788 0x6 0x1
+#define MX50_PAD_DISP_D9__USBPHY1_DATAOUT_1			0x194 0x474 0x000 0x7 0x0
+#define MX50_PAD_DISP_D10__ELCDIF_DAT_10			0x198 0x478 0x724 0x0 0x0
+#define MX50_PAD_DISP_D10__GPIO2_10				0x198 0x478 0x000 0x1 0x0
+#define MX50_PAD_DISP_D10__EIM_NANDF_CEN_0			0x198 0x478 0x000 0x2 0x0
+#define MX50_PAD_DISP_D10__ESDHC3_LCTL				0x198 0x478 0x000 0x3 0x0
+#define MX50_PAD_DISP_D10__ESDHC4_DAT0				0x198 0x478 0x000 0x4 0x0
+#define MX50_PAD_DISP_D10__KPP_COL_5				0x198 0x478 0x794 0x5 0x1
+#define MX50_PAD_DISP_D10__FEC_RX_DV				0x198 0x478 0x784 0x6 0x1
+#define MX50_PAD_DISP_D10__USBPHY1_DATAOUT_2			0x198 0x478 0x000 0x7 0x0
+#define MX50_PAD_DISP_D11__ELCDIF_DAT_11			0x19c 0x47c 0x728 0x0 0x0
+#define MX50_PAD_DISP_D11__GPIO2_11				0x19c 0x47c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D11__EIM_NANDF_CEN_1			0x19c 0x47c 0x000 0x2 0x0
+#define MX50_PAD_DISP_D11__ESDHC4_DAT1				0x19c 0x47c 0x754 0x4 0x1
+#define MX50_PAD_DISP_D11__KPP_ROW_5				0x19c 0x47c 0x7a4 0x5 0x1
+#define MX50_PAD_DISP_D11__FEC_RDATA_1				0x19c 0x47c 0x77c 0x6 0x1
+#define MX50_PAD_DISP_D11__USBPHY1_DATAOUT_3			0x19c 0x47c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D12__ELCDIF_DAT_12			0x1a0 0x480 0x72c 0x0 0x0
+#define MX50_PAD_DISP_D12__GPIO2_12				0x1a0 0x480 0x000 0x1 0x0
+#define MX50_PAD_DISP_D12__EIM_NANDF_CEN_2			0x1a0 0x480 0x000 0x2 0x0
+#define MX50_PAD_DISP_D12__ESDHC1_CD				0x1a0 0x480 0x000 0x3 0x0
+#define MX50_PAD_DISP_D12__ESDHC4_DAT2				0x1a0 0x480 0x758 0x4 0x1
+#define MX50_PAD_DISP_D12__KPP_COL_6				0x1a0 0x480 0x798 0x5 0x1
+#define MX50_PAD_DISP_D12__FEC_RDATA_0				0x1a0 0x480 0x778 0x6 0x1
+#define MX50_PAD_DISP_D12__USBPHY1_DATAOUT_4			0x1a0 0x480 0x000 0x7 0x0
+#define MX50_PAD_DISP_D13__ELCDIF_DAT_13			0x1a4 0x484 0x730 0x0 0x0
+#define MX50_PAD_DISP_D13__GPIO2_13				0x1a4 0x484 0x000 0x1 0x0
+#define MX50_PAD_DISP_D13__EIM_NANDF_CEN_3			0x1a4 0x484 0x000 0x2 0x0
+#define MX50_PAD_DISP_D13__ESDHC3_CD				0x1a4 0x484 0x000 0x3 0x0
+#define MX50_PAD_DISP_D13__ESDHC4_DAT3				0x1a4 0x484 0x75c 0x4 0x1
+#define MX50_PAD_DISP_D13__KPP_ROW_6				0x1a4 0x484 0x7a8 0x5 0x1
+#define MX50_PAD_DISP_D13__FEC_TX_EN				0x1a4 0x484 0x000 0x6 0x0
+#define MX50_PAD_DISP_D13__USBPHY1_DATAOUT_5			0x1a4 0x484 0x000 0x7 0x0
+#define MX50_PAD_DISP_D14__ELCDIF_DAT_14			0x1a8 0x488 0x734 0x0 0x0
+#define MX50_PAD_DISP_D14__GPIO2_14				0x1a8 0x488 0x000 0x1 0x0
+#define MX50_PAD_DISP_D14__EIM_NANDF_READY0			0x1a8 0x488 0x7b4 0x2 0x1
+#define MX50_PAD_DISP_D14__ESDHC1_WP				0x1a8 0x488 0x000 0x3 0x0
+#define MX50_PAD_DISP_D14__ESDHC4_WP				0x1a8 0x488 0x000 0x4 0x0
+#define MX50_PAD_DISP_D14__KPP_COL_7				0x1a8 0x488 0x79c 0x5 0x1
+#define MX50_PAD_DISP_D14__FEC_TDATA_1				0x1a8 0x488 0x000 0x6 0x0
+#define MX50_PAD_DISP_D14__USBPHY1_DATAOUT_6			0x1a8 0x488 0x000 0x7 0x0
+#define MX50_PAD_DISP_D15__ELCDIF_DAT_15			0x1ac 0x48c 0x738 0x0 0x0
+#define MX50_PAD_DISP_D15__GPIO2_15				0x1ac 0x48c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D15__EIM_NANDF_DQS			0x1ac 0x48c 0x7b0 0x2 0x1
+#define MX50_PAD_DISP_D15__ESDHC3_RST				0x1ac 0x48c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D15__ESDHC4_CD				0x1ac 0x48c 0x000 0x4 0x0
+#define MX50_PAD_DISP_D15__KPP_ROW_7				0x1ac 0x48c 0x7ac 0x5 0x1
+#define MX50_PAD_DISP_D15__FEC_TDATA_0				0x1ac 0x48c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D15__USBPHY1_DATAOUT_7			0x1ac 0x48c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D0__EPDC_SDDO_0				0x1b0 0x54c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D0__GPIO3_0				0x1b0 0x54c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D0__EIM_WEIM_D_0				0x1b0 0x54c 0x7ec 0x2 0x1
+#define MX50_PAD_EPDC_D0__ELCDIF_RS				0x1b0 0x54c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D0__ELCDIF_DOTCLK				0x1b0 0x54c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D0__SDMA_DEBUG_EVT_CHN_LINES_0		0x1b0 0x54c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D0__USBPHY2_DATAOUT_0			0x1b0 0x54c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D1__EPDC_SDDO_1				0x1b4 0x550 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D1__GPIO3_1				0x1b4 0x550 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D1__EIM_WEIM_D_1				0x1b4 0x550 0x7f0 0x2 0x1
+#define MX50_PAD_EPDC_D1__ELCDIF_CS				0x1b4 0x550 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D1__ELCDIF_ENABLE				0x1b4 0x550 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D1__SDMA_DEBUG_EVT_CHN_LINES_1		0x1b4 0x550 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D1__USBPHY2_DATAOUT_1			0x1b4 0x550 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D2__EPDC_SDDO_2				0x1b8 0x554 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D2__GPIO3_2				0x1b8 0x554 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D2__EIM_WEIM_D_2				0x1b8 0x554 0x7f4 0x2 0x1
+#define MX50_PAD_EPDC_D2__ELCDIF_WR_RWN				0x1b8 0x554 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC				0x1b8 0x554 0x73c 0x4 0x2
+#define MX50_PAD_EPDC_D2__SDMA_DEBUG_EVT_CHN_LINES_2		0x1b8 0x554 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D2__USBPHY2_DATAOUT_2			0x1b8 0x554 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D3__EPDC_SDDO_3				0x1bc 0x558 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D3__GPIO3_3				0x1bc 0x558 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D3__EIM_WEIM_D_3				0x1bc 0x558 0x7f8 0x2 0x1
+#define MX50_PAD_EPDC_D3__ELCDIF_RD_E				0x1bc 0x558 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC				0x1bc 0x558 0x6f8 0x4 0x3
+#define MX50_PAD_EPDC_D3__SDMA_DEBUG_EVT_CHN_LINES_3		0x1bc 0x558 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D3__USBPHY2_DATAOUT_3			0x1bc 0x558 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D4__EPDC_SDDO_4				0x1c0 0x55c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D4__GPIO3_4				0x1c0 0x55c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D4__EIM_WEIM_D_4				0x1c0 0x55c 0x7fc 0x2 0x1
+#define MX50_PAD_EPDC_D4__SDMA_DEBUG_EVT_CHN_LINES_4		0x1c0 0x55c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D4__USBPHY2_DATAOUT_4			0x1c0 0x55c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D5__EPDC_SDDO_5				0x1c4 0x560 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D5__GPIO3_5				0x1c4 0x560 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D5__EIM_WEIM_D_5				0x1c4 0x560 0x800 0x2 0x1
+#define MX50_PAD_EPDC_D5__SDMA_DEBUG_EVT_CHN_LINES_5		0x1c4 0x560 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D5__USBPHY2_DATAOUT_5			0x1c4 0x560 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D6__EPDC_SDDO_6				0x1c8 0x564 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D6__GPIO3_6				0x1c8 0x564 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D6__EIM_WEIM_D_6				0x1c8 0x564 0x804 0x2 0x1
+#define MX50_PAD_EPDC_D6__SDMA_DEBUG_EVT_CHN_LINES_6		0x1c8 0x564 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D6__USBPHY2_DATAOUT_6			0x1c8 0x564 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D7__EPDC_SDDO_7				0x1cc 0x568 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D7__GPIO3_7				0x1cc 0x568 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D7__EIM_WEIM_D_7				0x1cc 0x568 0x808 0x2 0x1
+#define MX50_PAD_EPDC_D7__SDMA_DEBUG_EVT_CHN_LINES_7		0x1cc 0x568 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D7__USBPHY2_DATAOUT_7			0x1cc 0x568 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D8__EPDC_SDDO_8				0x1d0 0x56c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D8__GPIO3_8				0x1d0 0x56c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D8__EIM_WEIM_D_8				0x1d0 0x56c 0x80c 0x2 0x2
+#define MX50_PAD_EPDC_D8__ELCDIF_DAT_24				0x1d0 0x56c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D8__SDMA_DEBUG_MATCHED_DMBUS		0x1d0 0x56c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D8__USBPHY2_VSTATUS_0			0x1d0 0x56c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D9__EPDC_SDDO_9				0x1d4 0x570 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D9__GPIO3_9				0x1d4 0x570 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D9__EIM_WEIM_D_9				0x1d4 0x570 0x810 0x2 0x2
+#define MX50_PAD_EPDC_D9__ELCDIF_DAT_25				0x1d4 0x570 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D9__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x1d4 0x570 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D9__USBPHY2_VSTATUS_1			0x1d4 0x570 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D10__EPDC_SDDO_10				0x1d8 0x574 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D10__GPIO3_10				0x1d8 0x574 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D10__EIM_WEIM_D_10			0x1d8 0x574 0x814 0x2 0x2
+#define MX50_PAD_EPDC_D10__ELCDIF_DAT_26			0x1d8 0x574 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D10__SDMA_DEBUG_EVENT_CHANNEL_0		0x1d8 0x574 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D10__USBPHY2_VSTATUS_2			0x1d8 0x574 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D11__EPDC_SDDO_11				0x1dc 0x578 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D11__GPIO3_11				0x1dc 0x578 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D11__EIM_WEIM_D_11			0x1dc 0x578 0x818 0x2 0x2
+#define MX50_PAD_EPDC_D11__ELCDIF_DAT_27			0x1dc 0x578 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D11__SDMA_DEBUG_EVENT_CHANNEL_1		0x1dc 0x578 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D11__USBPHY2_VSTATUS_3			0x1dc 0x578 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D12__EPDC_SDDO_12				0x1e0 0x57c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D12__GPIO3_12				0x1e0 0x57c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D12__EIM_WEIM_D_12			0x1e0 0x57c 0x81c 0x2 0x1
+#define MX50_PAD_EPDC_D12__ELCDIF_DAT_28			0x1e0 0x57c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D12__SDMA_DEBUG_EVENT_CHANNEL_2		0x1e0 0x57c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D12__USBPHY2_VSTATUS_4			0x1e0 0x57c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D13__EPDC_SDDO_13				0x1e4 0x580 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D13__GPIO3_13				0x1e4 0x580 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D13__EIM_WEIM_D_13			0x1e4 0x580 0x820 0x2 0x1
+#define MX50_PAD_EPDC_D13__ELCDIF_DAT_29			0x1e4 0x580 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D13__SDMA_DEBUG_EVENT_CHANNEL_3		0x1e4 0x580 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D13__USBPHY2_VSTATUS_5			0x1e4 0x580 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D14__EPDC_SDDO_14				0x1e8 0x584 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D14__GPIO3_14				0x1e8 0x584 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D14__EIM_WEIM_D_14			0x1e8 0x584 0x824 0x2 0x1
+#define MX50_PAD_EPDC_D14__ELCDIF_DAT_30			0x1e8 0x584 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D14__AUDMUX_AUD6_TXD			0x1e8 0x584 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D14__SDMA_DEBUG_EVENT_CHANNEL_4		0x1e8 0x584 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D14__USBPHY2_VSTATUS_6			0x1e8 0x584 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D15__EPDC_SDDO_15				0x1ec 0x588 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D15__GPIO3_15				0x1ec 0x588 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D15__EIM_WEIM_D_15			0x1ec 0x588 0x828 0x2 0x1
+#define MX50_PAD_EPDC_D15__ELCDIF_DAT_31			0x1ec 0x588 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D15__AUDMUX_AUD6_TXC			0x1ec 0x588 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D15__SDMA_DEBUG_EVENT_CHANNEL_5		0x1ec 0x588 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D15__USBPHY2_VSTATUS_7			0x1ec 0x588 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK				0x1f0 0x58c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDCLK__GPIO3_16				0x1f0 0x58c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDCLK__EIM_WEIM_D_16			0x1f0 0x58c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDCLK__ELCDIF_DAT_16			0x1f0 0x58c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDCLK__AUDMUX_AUD6_TXFS			0x1f0 0x58c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDCLK__SDMA_DEBUG_CORE_STATE_0		0x1f0 0x58c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDCLK__USBPHY2_BISTOK			0x1f0 0x58c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDSP__EPCD_GDSP				0x1f4 0x590 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDSP__GPIO3_17				0x1f4 0x590 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDSP__EIM_WEIM_D_17			0x1f4 0x590 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDSP__ELCDIF_DAT_17			0x1f4 0x590 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDSP__AUDMUX_AUD6_RXD			0x1f4 0x590 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDSP__SDMA_DEBUG_CORE_STATE_1		0x1f4 0x590 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDSP__USBPHY2_BVALID			0x1f4 0x590 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDOE__EPCD_GDOE				0x1f8 0x594 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDOE__GPIO3_18				0x1f8 0x594 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDOE__EIM_WEIM_D_18			0x1f8 0x594 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDOE__ELCDIF_DAT_18			0x1f8 0x594 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDOE__AUDMUX_AUD6_RXC			0x1f8 0x594 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDOE__SDMA_DEBUG_CORE_STATE_2		0x1f8 0x594 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDOE__USBPHY2_ENDSESSION			0x1f8 0x594 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDRL__EPCD_GDRL				0x1fc 0x598 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDRL__GPIO3_19				0x1fc 0x598 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDRL__EIM_WEIM_D_19			0x1f8 0x598 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDRL__ELCDIF_DAT_19			0x1fc 0x598 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDRL__AUDMUX_AUD6_RXFS			0x1fc 0x598 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDRL__SDMA_DEBUG_CORE_STATE_3		0x1fc 0x598 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDRL__USBPHY2_IDDIG			0x1fc 0x598 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLK__EPCD_SDCLK				0x200 0x59c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLK__GPIO3_20				0x200 0x59c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLK__EIM_WEIM_D_20			0x200 0x59c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLK__ELCDIF_DAT_20			0x200 0x59c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDCLK__AUDMUX_AUD5_TXD			0x200 0x59c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLK__SDMA_DEBUG_BUS_DEVICE_0		0x200 0x59c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLK__USBPHY2_HOSTDISCONNECT		0x200 0x59c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOEZ__EPCD_SDOEZ				0x204 0x5a0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOEZ__GPIO3_21				0x204 0x5a0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOEZ__EIM_WEIM_D_21			0x204 0x5a0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOEZ__ELCDIF_DAT_21			0x204 0x5a0 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOEZ__AUDMUX_AUD5_TXC			0x204 0x5a0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOEZ__SDMA_DEBUG_BUS_DEVICE_1		0x204 0x5a0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOEZ__USBPHY2_TXREADY			0x204 0x5a0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOED__EPCD_SDOED				0x208 0x5a4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOED__GPIO3_22				0x208 0x5a4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOED__EIM_WEIM_D_22			0x208 0x5a4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOED__ELCDIF_DAT_22			0x208 0x5a4 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOED__AUDMUX_AUD5_TXFS			0x208 0x5a4 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOED__SDMA_DEBUG_BUS_DEVICE_2		0x208 0x5a4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOED__USBPHY2_RXVALID			0x208 0x5a4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOE__EPCD_SDOE				0x20c 0x5a8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOE__GPIO3_23				0x20c 0x5a8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOE__EIM_WEIM_D_23			0x20c 0x5a8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOE__ELCDIF_DAT_23			0x20c 0x5a8 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOE__AUDMUX_AUD5_RXD			0x20c 0x5a8 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOE__SDMA_DEBUG_BUS_DEVICE_3		0x20c 0x5a8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOE__USBPHY2_RXACTIVE			0x20c 0x5a8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDLE__EPCD_SDLE				0x210 0x5ac 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDLE__GPIO3_24				0x210 0x5ac 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDLE__EIM_WEIM_D_24			0x210 0x5ac 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDLE__ELCDIF_DAT_8			0x210 0x5ac 0x71c 0x3 0x1
+#define MX50_PAD_EPDC_SDLE__AUDMUX_AUD5_RXC			0x210 0x5ac 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDLE__SDMA_DEBUG_BUS_DEVICE_4		0x210 0x5ac 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDLE__USBPHY2_RXERROR			0x210 0x5ac 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLKN__EPCD_SDCLKN			0x214 0x5b0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLKN__GPIO3_25				0x214 0x5b0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLKN__EIM_WEIM_D_25			0x214 0x5b0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLKN__ELCDIF_DAT_9			0x214 0x5b0 0x720 0x3 0x1
+#define MX50_PAD_EPDC_SDCLKN__AUDMUX_AUD5_RXFS			0x214 0x5b0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLKN__SDMA_DEBUG_BUS_ERROR		0x214 0x5b0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLKN__USBPHY2_SIECLOCK			0x214 0x5b0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDSHR__EPCD_SDSHR				0x218 0x5b4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDSHR__GPIO3_26				0x218 0x5b4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDSHR__EIM_WEIM_D_26			0x218 0x5b4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDSHR__ELCDIF_DAT_10			0x218 0x5b4 0x724 0x3 0x1
+#define MX50_PAD_EPDC_SDSHR__AUDMUX_AUD4_TXD			0x218 0x5b4 0x6c8 0x4 0x1
+#define MX50_PAD_EPDC_SDSHR__SDMA_DEBUG_BUS_RWB			0x218 0x5b4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDSHR__USBPHY2_LINESTATE_0		0x218 0x5b4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCOM__EPCD_PWRCOM			0x21c 0x5b8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCOM__GPIO3_27				0x21c 0x5b8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCOM__EIM_WEIM_D_27			0x21c 0x5b8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCOM__ELCDIF_DAT_11			0x21c 0x5b8 0x728 0x3 0x1
+#define MX50_PAD_EPDC_PWRCOM__AUDMUX_AUD4_TXC			0x21c 0x5b8 0x6d4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCOM__SDMA_DEBUG_CORE_RUN		0x21c 0x5b8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCOM__USBPHY2_LINESTATE_1		0x21c 0x5b8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EPCD_PWRSTAT			0x220 0x5bc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRSTAT__GPIO3_28				0x220 0x5bc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EIM_WEIM_D_28			0x220 0x5bc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_DAT_12			0x220 0x5bc 0x72c 0x3 0x1
+#define MX50_PAD_EPDC_PWRSTAT__AUDMUX_AUD4_TXFS			0x220 0x5bc 0x6d8 0x4 0x1
+#define MX50_PAD_EPDC_PWRSTAT__SDMA_DEBUG_MODE			0x220 0x5bc 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRSTAT__USBPHY2_VBUSVALID		0x220 0x5bc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EPCD_PWRCTRL0			0x224 0x5c0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__GPIO3_29			0x224 0x5c0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EIM_WEIM_D_29			0x224 0x5c0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_DAT_13			0x224 0x5c0 0x730 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__AUDMUX_AUD4_RXD			0x224 0x5c0 0x6c4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__SDMA_DEBUG_RTBUFFER_WRITE	0x224 0x5c0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__USBPHY2_AVALID			0x224 0x5c0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EPCD_PWRCTRL1			0x228 0x5c4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__GPIO3_30			0x228 0x5c4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EIM_WEIM_D_30			0x228 0x5c4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_DAT_14			0x228 0x5c4 0x734 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__AUDMUX_AUD4_RXC			0x228 0x5c4 0x6cc 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__SDMA_DEBUG_YIELD		0x228 0x5c4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__USBPHY1_ONBIST			0x228 0x5c4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EPCD_PWRCTRL2			0x22c 0x5c8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__GPIO3_31			0x22c 0x5c8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EIM_WEIM_D_31			0x22c 0x5c8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_DAT_15			0x22c 0x5c8 0x738 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__AUDMUX_AUD4_RXFS		0x22c 0x5c8 0x6d0 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT_EVENT_0		0x22c 0x5c8 0x7b8 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__USBPHY2_ONBIST			0x22c 0x5c8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EPCD_PWRCTRL3			0x230 0x5cc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__GPIO4_20			0x230 0x5cc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EIM_WEIM_EB_2			0x230 0x5cc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT_EVENT_1		0x230 0x5cc 0x7bc 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL3__USBPHY1_BISTOK			0x230 0x5cc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM0__EPCD_VCOM_0			0x234 0x5d0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM0__GPIO4_21				0x234 0x5d0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM0__EIM_WEIM_EB_3			0x234 0x5d0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_VCOM0__USBPHY2_BISTOK			0x234 0x5d0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM1__EPCD_VCOM_1			0x238 0x5d4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM1__GPIO4_22				0x238 0x5d4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM1__EIM_WEIM_CS_3			0x238 0x5d4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_BDR0__EPCD_BDR_0				0x23c 0x5d8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR0__GPIO4_23				0x23c 0x5d8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR0__ELCDIF_DAT_7			0x23c 0x5d8 0x718 0x3 0x1
+#define MX50_PAD_EPDC_BDR1__EPCD_BDR_1				0x240 0x5dc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR1__GPIO4_24				0x240 0x5dc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR1__ELCDIF_DAT_6			0x240 0x5dc 0x714 0x3 0x1
+#define MX50_PAD_EPDC_SDCE0__EPCD_SDCE_0			0x244 0x5e0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE0__GPIO4_25				0x244 0x5e0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE0__ELCDIF_DAT_5			0x244 0x5e0 0x710 0x3 0x1
+#define MX50_PAD_EPDC_SDCE1__EPCD_SDCE_1			0x248 0x5e4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE1__GPIO4_26				0x248 0x5e4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE1__ELCDIF_DAT_4			0x248 0x5e4 0x70c 0x3 0x0
+#define MX50_PAD_EPDC_SDCE2__EPCD_SDCE_2			0x24c 0x5e8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE2__GPIO4_27				0x24c 0x5e8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT_3			0x24c 0x5e8 0x708 0x3 0x1
+#define MX50_PAD_EPDC_SDCE3__EPCD_SDCE_3			0x250 0x5ec 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE3__GPIO4_28				0x250 0x5ec 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE3__ELCDIF_DAT_2			0x250 0x5ec 0x704 0x3 0x1
+#define MX50_PAD_EPDC_SDCE4__EPCD_SDCE_4			0x254 0x5f0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE4__GPIO4_29				0x254 0x5f0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE4__ELCDIF_DAT_1			0x254 0x5f0 0x700 0x3 0x1
+#define MX50_PAD_EPDC_SDCE5__EPCD_SDCE_5			0x258 0x5f4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE5__GPIO4_30				0x258 0x5f4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE5__ELCDIF_DAT_0			0x258 0x5f4 0x6fc 0x3 0x1
+#define MX50_PAD_EIM_DA0__EIM_WEIM_A_0				0x25c 0x5f8 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA0__GPIO1_0				0x25c 0x5f8 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA0__KPP_COL_4				0x25c 0x5f8 0x790 0x3 0x2
+#define MX50_PAD_EIM_DA0__TPIU_TRACE_0				0x25c 0x5f8 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA0__SRC_BT_CFG1_0				0x25c 0x5f8 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA1__EIM_WEIM_A_1				0x260 0x5fc 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA1__GPIO1_1				0x260 0x5fc 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA1__KPP_ROW_4				0x260 0x5fc 0x7a0 0x3 0x2
+#define MX50_PAD_EIM_DA1__TPIU_TRACE_1				0x260 0x5fc 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA1__SRC_BT_CFG1_1				0x260 0x5fc 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA2__EIM_WEIM_A_2				0x264 0x600 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA2__GPIO1_2				0x264 0x600 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA2__KPP_COL_5				0x264 0x600 0x794 0x3 0x2
+#define MX50_PAD_EIM_DA2__TPIU_TRACE_2				0x264 0x600 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA2__SRC_BT_CFG1_2				0x264 0x600 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA3__EIM_WEIM_A_3				0x268 0x604 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA3__GPIO1_3				0x268 0x604 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA3__KPP_ROW_5				0x268 0x604 0x7a4 0x3 0x2
+#define MX50_PAD_EIM_DA3__TPIU_TRACE_3				0x268 0x604 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA3__SRC_BT_CFG1_3				0x268 0x604 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA4__EIM_WEIM_A_4				0x26c 0x608 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA4__GPIO1_4				0x26c 0x608 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA4__KPP_COL_6				0x26c 0x608 0x798 0x3 0x2
+#define MX50_PAD_EIM_DA4__TPIU_TRACE_4				0x26c 0x608 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA4__SRC_BT_CFG1_4				0x26c 0x608 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA5__EIM_WEIM_A_5				0x270 0x60c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA5__GPIO1_5				0x270 0x60c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA5__KPP_ROW_6				0x270 0x60c 0x7a8 0x3 0x2
+#define MX50_PAD_EIM_DA5__TPIU_TRACE_5				0x270 0x60c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA5__SRC_BT_CFG1_5				0x270 0x60c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA6__EIM_WEIM_A_6				0x274 0x610 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA6__GPIO1_6				0x274 0x610 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA6__KPP_COL_7				0x274 0x610 0x79c 0x3 0x2
+#define MX50_PAD_EIM_DA6__TPIU_TRACE_6				0x274 0x610 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA6__SRC_BT_CFG1_6				0x274 0x610 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA7__EIM_WEIM_A_7				0x278 0x614 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA7__GPIO1_7				0x278 0x614 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA7__KPP_ROW_7				0x278 0x614 0x7ac 0x3 0x2
+#define MX50_PAD_EIM_DA7__TPIU_TRACE_7				0x278 0x614 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA7__SRC_BT_CFG1_7				0x278 0x614 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA8__EIM_WEIM_A_8				0x27c 0x618 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA8__GPIO1_8				0x27c 0x618 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA8__EIM_NANDF_CLE				0x27c 0x618 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA8__TPIU_TRACE_8				0x27c 0x618 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA8__SRC_BT_CFG2_0				0x27c 0x618 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA9__EIM_WEIM_A_9				0x280 0x61c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA9__GPIO1_9				0x280 0x61c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA9__EIM_NANDF_ALE				0x280 0x61c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA9__TPIU_TRACE_9				0x280 0x61c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA9__SRC_BT_CFG2_1				0x280 0x61c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA10__EIM_WEIM_A_10			0x284 0x620 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA10__GPIO1_10				0x284 0x620 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA10__EIM_NANDF_CEN_0			0x284 0x620 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA10__TPIU_TRACE_10			0x284 0x620 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA10__SRC_BT_CFG2_2			0x284 0x620 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA11__EIM_WEIM_A_11			0x288 0x624 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA11__GPIO1_11				0x288 0x624 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA11__EIM_NANDF_CEN_1			0x288 0x624 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA11__TPIU_TRACE_11			0x288 0x624 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA11__SRC_BT_CFG2_3			0x288 0x624 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA12__EIM_WEIM_A_12			0x28c 0x628 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA12__GPIO1_12				0x28c 0x628 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA12__EIM_NANDF_CEN_2			0x28c 0x628 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA12__EPDC_SDCE_6				0x28c 0x628 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA12__TPIU_TRACE_12			0x28c 0x628 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA12__SRC_BT_CFG2_4			0x28c 0x628 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA13__EIM_WEIM_A_13			0x290 0x62c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA13__GPIO1_13				0x290 0x62c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA13__EIM_NANDF_CEN_3			0x290 0x62c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA13__EPDC_SDCE_7				0x290 0x62c 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA13__TPIU_TRACE_13			0x290 0x62c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA13__SRC_BT_CFG2_5			0x290 0x62c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA14__EIM_WEIM_A_14			0x294 0x630 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA14__GPIO1_14				0x294 0x630 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA14__EIM_NANDF_READY0			0x294 0x630 0x7b4 0x2 0x2
+#define MX50_PAD_EIM_DA14__EPDC_SDCE_8				0x294 0x630 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA14__TPIU_TRACE_14			0x294 0x630 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA14__SRC_BT_CFG2_6			0x294 0x630 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA15__EIM_WEIM_A_15			0x298 0x634 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA15__GPIO1_15				0x298 0x634 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA15__EIM_NANDF_DQS			0x298 0x634 0x7b0 0x2 0x2
+#define MX50_PAD_EIM_DA15__EPDC_SDCE_9				0x298 0x634 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA15__TPIU_TRACE_15			0x298 0x634 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA15__SRC_BT_CFG2_7			0x298 0x634 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_CS_2				0x29c 0x638 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS2__GPIO1_16				0x29c 0x638 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_A_27				0x29c 0x638 0x000 0x2 0x0
+#define MX50_PAD_EIM_CS2__TPIU_TRCLK				0x29c 0x638 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS2__SRC_BT_CFG3_0				0x29c 0x638 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS1__EIM_WEIM_CS_1				0x2a0 0x63c 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS1__GPIO1_17				0x2a0 0x63c 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS1__TPIU_TRCTL				0x2a0 0x63c 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS1__SRC_BT_CFG3_1				0x2a0 0x63c 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS0__EIM_WEIM_CS_0				0x2a4 0x640 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS0__GPIO1_18				0x2a4 0x640 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS0__SRC_BT_CFG3_2				0x2a4 0x640 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB0__EIM_WEIM_EB_0				0x2a8 0x644 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB0__GPIO1_19				0x2a8 0x644 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB0__SRC_BT_CFG3_3				0x2a8 0x644 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB1__EIM_WEIM_EB_1				0x2ac 0x648 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB1__GPIO1_20				0x2ac 0x648 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB1__SRC_BT_CFG3_4				0x2ac 0x648 0x000 0x7 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_WAIT			0x2b0 0x64c 0x000 0x0 0x0
+#define MX50_PAD_EIM_WAIT__GPIO1_21				0x2b0 0x64c 0x000 0x1 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_DTACK_B			0x2b0 0x64c 0x000 0x2 0x0
+#define MX50_PAD_EIM_WAIT__SRC_BT_CFG3_5			0x2b0 0x64c 0x000 0x7 0x0
+#define MX50_PAD_EIM_BCLK__EIM_WEIM_BCLK			0x2b4 0x650 0x000 0x0 0x0
+#define MX50_PAD_EIM_BCLK__GPIO1_22				0x2b4 0x650 0x000 0x1 0x0
+#define MX50_PAD_EIM_BCLK__SRC_BT_CFG3_6			0x2b4 0x650 0x000 0x7 0x0
+#define MX50_PAD_EIM_RDY__EIM_WEIM_RDY				0x2b8 0x654 0x000 0x0 0x0
+#define MX50_PAD_EIM_RDY__GPIO1_23				0x2b8 0x654 0x000 0x1 0x0
+#define MX50_PAD_EIM_RDY__SRC_BT_CFG3_7				0x2b8 0x654 0x000 0x7 0x0
+#define MX50_PAD_EIM_OE__EIM_WEIM_OE				0x2bc 0x658 0x000 0x0 0x0
+#define MX50_PAD_EIM_OE__GPIO1_24				0x2bc 0x658 0x000 0x1 0x0
+#define MX50_PAD_EIM_OE__INT_BOOT				0x2bc 0x658 0x000 0x7 0x0
+#define MX50_PAD_EIM_RW__EIM_WEIM_RW				0x2c0 0x65c 0x000 0x0 0x0
+#define MX50_PAD_EIM_RW__GPIO1_25				0x2c0 0x65c 0x000 0x1 0x0
+#define MX50_PAD_EIM_RW__SYSTEM_RST				0x2c0 0x65c 0x000 0x7 0x0
+#define MX50_PAD_EIM_LBA__EIM_WEIM_LBA				0x2c4 0x660 0x000 0x0 0x0
+#define MX50_PAD_EIM_LBA__GPIO1_26				0x2c4 0x660 0x000 0x1 0x0
+#define MX50_PAD_EIM_LBA__TESTER_ACK				0x2c4 0x660 0x000 0x7 0x0
+#define MX50_PAD_EIM_CRE__EIM_WEIM_CRE				0x2c8 0x664 0x000 0x0 0x0
+#define MX50_PAD_EIM_CRE__GPIO1_27				0x2c8 0x664 0x000 0x1 0x0
+
+#endif /* __DTS_IMX50_PINFUNC_H */
diff --git a/src/arm/imx50.dtsi b/src/arm/imx50.dtsi
new file mode 100644
index 000000000000..c0e0f60ab6b2
--- /dev/null
+++ b/src/arm/imx50.dtsi
@@ -0,0 +1,487 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx50-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+	tzic: tz-interrupt-controller@0fffc000 {
+		compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x0fffc000 0x4000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		aips@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			spba@50000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x50000000 0x40000>;
+				ranges;
+
+				esdhc1: esdhc@50004000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc2: esdhc@50008000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+					         <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi1: ecspi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					compatible = "fsl,imx50-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: esdhc@50020000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: esdhc@50024000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+				status = "disabled";
+			};
+
+			usbh1: usb@53f80200 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+				status = "disabled";
+			};
+
+			usbh2: usb@53f80400 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				status = "disabled";
+			};
+
+			usbh3: usb@53f80600 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@53f84000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53f88000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@53f8c000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@53f90000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			wdog1: wdog@53f98000 {
+				compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+				         <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx50-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+				         <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+				         <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: src@53fd0000 {
+				compatible = "fsl,imx50-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx50-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio5: gpio@53fdc000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fdc000 0x4000>;
+				interrupts = <103 104>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@53fe0000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <105 106>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c3: i2c@53fec000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x53fec000 0x4000>;
+				interrupts = <64>;
+				clocks = <&clks IMX5_CLK_I2C3_GATE>;
+				status = "disabled";
+			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+				         <&clks IMX5_CLK_UART4_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		aips@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+				         <&clks IMX5_CLK_UART5_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx50-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: ecspi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: sdma@63fb0000 {
+				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+				         <&clks IMX5_CLK_SDMA_GATE>;
+				clock-names = "ipg", "ahb";
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
+			};
+
+			cspi: cspi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@63fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@63fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@63fcc000 {
+				compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/imx51-digi-connectcore-jsk.dts b/src/arm/imx51-digi-connectcore-jsk.dts
new file mode 100644
index 000000000000..1db517d3d497
--- /dev/null
+++ b/src/arm/imx51-digi-connectcore-jsk.dts
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx51-digi-connectcore-som.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51 JSK";
+	compatible = "digi,connectcore-ccxmx51-jsk",
+		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	chosen {
+		linux,stdout-path = &uart1;
+	};
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	imx51-digi-connectcore-jsk {
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
+				MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
+				MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
+				MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
+				MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx51-digi-connectcore-som.dtsi b/src/arm/imx51-digi-connectcore-som.dtsi
new file mode 100644
index 000000000000..321662f53e33
--- /dev/null
+++ b/src/arm/imx51-digi-connectcore-som.dtsi
@@ -0,0 +1,377 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Digi ConnectCore CC(W)-MX51";
+	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
+
+	memory {
+		reg = <0x90000000 0x08000000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13892@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mc13892>;
+		compatible = "fsl,mc13892";
+		spi-max-frequency = <16000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1225000>;
+				regulator-max-microvolt = <1225000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst { };
+
+			viohi_reg: viohi {
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <3150000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <2600000>;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <3150000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			gpo1_reg: gpo1 { };
+
+			gpo2_reg: gpo2 { };
+
+			gpo3_reg: gpo3 { };
+
+			gpo4_reg: gpo4 { };
+
+			pwgt2spi_reg: pwgt2spi {
+				regulator-always-on;
+			};
+
+			vcoincell_reg: vcoincell {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cap-sdio-irq;
+	enable-sdio-wakeup;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&gpo4_reg>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-supply = <&gpo3_reg>;
+	/* Pins shared with LCD2, keep status disabled */
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	mma7455l@1d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mma7455l>;
+		compatible = "fsl,mma7455l";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi_wide";
+	disable-over-current;
+	/* Device role is not known, keep status disabled */
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	lan9221: lan9221@5,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lan9221>;
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <5 0x00000000 0x1000>;
+		fsl,weim-cs-timing = <
+			0x00420081 0x00000000
+			0x32260000 0x00000000
+			0x72080f00 0x00000000
+		>;
+		clocks = <&clks IMX5_CLK_DUMMY>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&gpo2_reg>;
+		vddvario-supply = <&gpo2_reg>;
+	};
+};
+
+&iomuxc {
+	imx51-digi-connectcore-som {
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
+				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
+				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
+				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
+				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
+				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
+				MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
+				MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
+				MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
+				MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
+				MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
+				MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
+				MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
+				MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
+				MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
+				MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
+				MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
+				MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
+				MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
+				MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
+				MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
+			>;
+		};
+
+		pinctrl_lan9221: lan9221grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_mc13892: mc13892grp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
+			>;
+		};
+
+		pinctrl_mma7455l: mma7455lgrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
+				MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
+				MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
+				MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
+				MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
+				MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
+				MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
+				MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
+				MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
+				MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
+				MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
+				MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
+				MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
+				MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
+				MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
+				MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
+				MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
+				MX51_PAD_EIM_A16__EIM_A16		0x80000000
+				MX51_PAD_EIM_A17__EIM_A17		0x80000000
+				MX51_PAD_EIM_A18__EIM_A18		0x80000000
+				MX51_PAD_EIM_A19__EIM_A19		0x80000000
+				MX51_PAD_EIM_A20__EIM_A20		0x80000000
+				MX51_PAD_EIM_A21__EIM_A21		0x80000000
+				MX51_PAD_EIM_A22__EIM_A22		0x80000000
+				MX51_PAD_EIM_A23__EIM_A23		0x80000000
+				MX51_PAD_EIM_A24__EIM_A24		0x80000000
+				MX51_PAD_EIM_A25__EIM_A25		0x80000000
+				MX51_PAD_EIM_A26__EIM_A26		0x80000000
+				MX51_PAD_EIM_A27__EIM_A27		0x80000000
+				MX51_PAD_EIM_D16__EIM_D16		0x80000000
+				MX51_PAD_EIM_D17__EIM_D17		0x80000000
+				MX51_PAD_EIM_D18__EIM_D18		0x80000000
+				MX51_PAD_EIM_D19__EIM_D19		0x80000000
+				MX51_PAD_EIM_D20__EIM_D20		0x80000000
+				MX51_PAD_EIM_D21__EIM_D21		0x80000000
+				MX51_PAD_EIM_D22__EIM_D22		0x80000000
+				MX51_PAD_EIM_D23__EIM_D23		0x80000000
+				MX51_PAD_EIM_D24__EIM_D24		0x80000000
+				MX51_PAD_EIM_D25__EIM_D25		0x80000000
+				MX51_PAD_EIM_D26__EIM_D26		0x80000000
+				MX51_PAD_EIM_D27__EIM_D27		0x80000000
+				MX51_PAD_EIM_D28__EIM_D28		0x80000000
+				MX51_PAD_EIM_D29__EIM_D29		0x80000000
+				MX51_PAD_EIM_D30__EIM_D30		0x80000000
+				MX51_PAD_EIM_D31__EIM_D31		0x80000000
+				MX51_PAD_EIM_OE__EIM_OE			0x80000000
+				MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
+				MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
+				MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx51-eukrea-cpuimx51.dtsi b/src/arm/imx51-eukrea-cpuimx51.dtsi
new file mode 100644
index 000000000000..63164266af83
--- /dev/null
+++ b/src/arm/imx51-eukrea-cpuimx51.dtsi
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx51.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,cpuimx51", "fsl,imx51";
+
+	memory {
+		reg = <0x90000000 0x10000000>; /* 256M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@49 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio4 0 1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <0x0 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x49>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	imx51-eukrea {
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <
+				MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
+				MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
+				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
+				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
+				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
+				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
+				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
+				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
+				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
+				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
+				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
+				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
+				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
+				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
+				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
+				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
+				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
+				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
+				MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts b/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts
new file mode 100644
index 000000000000..34599c547459
--- /dev/null
+++ b/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -0,0 +1,294 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/dts-v1/;
+#include "imx51-eukrea-cpuimx51.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Eukrea CPUIMX51";
+	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+
+	clocks {
+		clk24M: can_clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys_1>;
+
+		button-1 {
+			label = "BP1";
+			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+			gpio-key,wakeup;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_can: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "CAN_RST";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <20000>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx51-eukrea-tlv320aic23";
+		ssi-controller = <&ssi2>;
+		fsl,mux-int-port = <2>;
+		fsl,mux-ext-port = <3>;
+	};
+
+	usbphy {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		usbh1phy: usbh1phy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+			clock-names = "main_clk";
+			clock-frequency = <19200000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can0: can@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&clk24M>;
+		spi-max-frequency = <10000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&reg_can>;
+	};
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx51-eukrea {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
+				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
+				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
+				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
+			>;
+		};
+
+
+		pinctrl_can: cangrp {
+			fsl,pins = <
+				MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
+				MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+				MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+			>;
+		};
+
+		pinctrl_uart3_rtscts: uart3rtsctsgrp {
+			fsl,pins = <
+				MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
+				MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
+			>;
+		};
+
+		pinctrl_backlight_1: backlightgrp-1 {
+			fsl,pins = <
+				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
+			>;
+		};
+
+		pinctrl_esdhc1_cd: esdhc1_cd {
+			fsl,pins = <
+				MX51_PAD_GPIO1_0__GPIO1_0 0xd5
+			>;
+		};
+
+		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
+			>;
+		};
+
+		pinctrl_gpioled: gpioledgrp-1 {
+			fsl,pins = <
+				MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
+			>;
+		};
+
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <
+				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
+				MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
+				MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
+				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
+				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
+				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
+				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
+				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
+				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
+				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
+				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
+				MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
+			>;
+		};
+
+		pinctrl_usbh1_vbus: usbh1-vbusgrp {
+			fsl,pins = <
+				MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
+			>;
+		};
+	};
+};
+
+&ssi2 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbh1phy>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	phy_type = "utmi_wide";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1_vbus>;
+	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+};
diff --git a/src/arm/imx53-m53.dtsi b/src/arm/imx53-m53.dtsi
new file mode 100644
index 000000000000..87a7fc709c2d
--- /dev/null
+++ b/src/arm/imx53-m53.dtsi
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "DENX M53";
+	compatible = "denx,imx53-m53", "fsl,imx53";
+
+	memory {
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_backlight: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd-supply";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	stmpe610@41 {
+		compatible = "st,stmpe610";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		interrupts = <6 0x0>;
+		interrupt-parent = <&gpio7>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			reg = <0>;
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "stm,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
+				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
diff --git a/src/arm/imx53-qsb-common.dtsi b/src/arm/imx53-qsb-common.dtsi
new file mode 100644
index 000000000000..181ae5ebf23f
--- /dev/null
+++ b/src/arm/imx53-qsb-common.dtsi
@@ -0,0 +1,366 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	display0: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb565";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+		status = "disabled";
+		display-timings {
+			claawvga {
+				native-mode;
+				clock-frequency = <27000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <60>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				hsync-len = <20>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio1 8 0>;
+			linux,code = <116>; /* KEY_POWER */
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 14 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+			gpio-key,wakeup;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio2 15 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio7 7 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx53-qsb-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-qsb-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	cd-gpios = <&gpio3 11 0>;
+	wp-gpios = <&gpio3 12 0>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-qsb {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
+				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
+				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+			>;
+		};
+
+		led_pin_gpio7_7: led_gpio7_7@0 {
+			fsl,pins = <
+				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_ipu_disp0: ipudisp0grp {
+			fsl,pins = <
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+			>;
+		};
+
+		pinctrl_vga_sync: vgasync-grp {
+			fsl,pins = <
+				/* VGA_HSYNC, VSYNC with max drive strength */
+				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			>;
+		};
+	};
+};
+
+&tve {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vga_sync>;
+	fsl,tve-mode = "vga";
+	fsl,hsync-pin = <4>;
+	fsl,vsync-pin = <6>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p2v>;
+		VDDIO-supply = <&reg_3p2v>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 0>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/src/arm/imx53-qsrb.dts b/src/arm/imx53-qsrb.dts
new file mode 100644
index 000000000000..f1bbf9a32991
--- /dev/null
+++ b/src/arm/imx53-qsrb.dts
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx53-qsb-common.dtsi"
+
+/ {
+	model = "Freescale i.MX53 Quick Start-R Board";
+	compatible = "fsl,imx53-qsrb", "fsl,imx53";
+};
+
+&iomuxc {
+	i2c1 {
+		/* open drain */
+		pinctrl_i2c1_qsrb: i2c1grp-1 {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT8__I2C1_SDA      0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL      0x400001ec
+			>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_qsrb>;
+	status = "okay";
+
+	pmic: mc34708@8 {
+		compatible = "fsl,mc34708";
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 0x8>;
+		regulators {
+			sw1_reg: sw1a {
+				regulator-name = "SW1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1b_reg: sw1b {
+				regulator-name = "SW1B";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "SW2";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1437500>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-name = "SW3";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <1425000>;
+				regulator-boot-on;
+			};
+
+			sw4a_reg: sw4a {
+				regulator-name = "SW4A";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4b_reg: sw4b {
+				regulator-name = "SW4B";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw5_reg: sw5 {
+				regulator-name = "SW5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-name = "SWBST";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-name = "VPLL";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			vrefddr_reg: vrefddr {
+				regulator-name = "VREFDDR";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-name = "VUSB";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-name = "VUSB2";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdac_reg: vdac {
+				regulator-name = "VDAC";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-name = "VGEN1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "VGEN2";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/src/arm/imx53-tx53-x03x.dts b/src/arm/imx53-tx53-x03x.dts
new file mode 100644
index 000000000000..3b73e81dc3f0
--- /dev/null
+++ b/src/arm/imx53-tx53-x03x.dts
@@ -0,0 +1,324 @@
+/*
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LCD)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &display;
+	};
+
+	soc {
+		display: display@di0 {
+			compatible = "fsl,imx-parallel-display";
+			interface-pix-fmt = "rgb24";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_rgb24_vga1>;
+			status = "okay";
+
+			port {
+				display0_in: endpoint {
+					remote-endpoint = <&ipu_di0_disp0>;
+				};
+			};
+
+			display-timings {
+				VGA {
+					clock-frequency = <25200000>;
+					hactive = <640>;
+					vactive = <480>;
+					hback-porch = <48>;
+					hsync-len = <96>;
+					hfront-porch = <16>;
+					vback-porch = <31>;
+					vsync-len = <2>;
+					vfront-porch = <12>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+
+				ETV570 {
+					clock-frequency = <25200000>;
+					hactive = <640>;
+					vactive = <480>;
+					hback-porch = <114>;
+					hsync-len = <30>;
+					hfront-porch = <16>;
+					vback-porch = <32>;
+					vsync-len = <3>;
+					vfront-porch = <10>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+
+				ET0350 {
+					clock-frequency = <6413760>;
+					hactive = <320>;
+					vactive = <240>;
+					hback-porch = <34>;
+					hsync-len = <34>;
+					hfront-porch = <20>;
+					vback-porch = <15>;
+					vsync-len = <3>;
+					vfront-porch = <4>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+
+				ET0430 {
+					clock-frequency = <9009000>;
+					hactive = <480>;
+					vactive = <272>;
+					hback-porch = <2>;
+					hsync-len = <41>;
+					hfront-porch = <2>;
+					vback-porch = <2>;
+					vsync-len = <10>;
+					vfront-porch = <2>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <1>;
+				};
+
+				ET0500 {
+					clock-frequency = <33264000>;
+					hactive = <800>;
+					vactive = <480>;
+					hback-porch = <88>;
+					hsync-len = <128>;
+					hfront-porch = <40>;
+					vback-porch = <33>;
+					vsync-len = <2>;
+					vfront-porch = <10>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+
+				ET0700 { /* same as ET0500 */
+					clock-frequency = <33264000>;
+					hactive = <800>;
+					vactive = <480>;
+					hback-porch = <88>;
+					hsync-len = <128>;
+					hfront-porch = <40>;
+					vback-porch = <33>;
+					vsync-len = <2>;
+					vfront-porch = <10>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+
+				ETQ570 {
+					clock-frequency = <6596040>;
+					hactive = <320>;
+					vactive = <240>;
+					hback-porch = <38>;
+					hsync-len = <30>;
+					hfront-porch = <30>;
+					vback-porch = <16>;
+					vsync-len = <3>;
+					vfront-porch = <4>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <0>;
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	regulators {
+		reg_lcd_pwr: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "LCD POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		reg_lcd_reset: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "LCD RESET";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 0>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 0>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	imx53-tx53-x03x {
+		pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
+			fsl,pins = <
+				MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
+				MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
+				MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
+				MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
+				MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
+				MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
+				MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
+				MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
+				MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
+				MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
+			>;
+		};
+
+		pinctrl_rgb24_vga1: rgb24-vgagrp1 {
+			fsl,pins = <
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
+			>;
+		};
+
+		pinctrl_tsc2007: tsc2007grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0,1 are mapped to KPP row/col 6,7 */
+	linux,keymap = <
+		MATRIX_KEY(6, 6, KEY_POWER)
+		MATRIX_KEY(6, 7, KEY_KP0)
+		MATRIX_KEY(6, 2, KEY_KP1)
+		MATRIX_KEY(6, 3, KEY_KP2)
+		MATRIX_KEY(7, 6, KEY_KP3)
+		MATRIX_KEY(7, 7, KEY_KP4)
+		MATRIX_KEY(7, 2, KEY_KP5)
+		MATRIX_KEY(7, 3, KEY_KP6)
+		MATRIX_KEY(2, 6, KEY_KP7)
+		MATRIX_KEY(2, 7, KEY_KP8)
+		MATRIX_KEY(2, 2, KEY_KP9)
+	>;
+	status = "okay";
+};
diff --git a/src/arm/imx53-tx53-x13x.dts b/src/arm/imx53-tx53-x13x.dts
new file mode 100644
index 000000000000..64804719f0f4
--- /dev/null
+++ b/src/arm/imx53-tx53-x13x.dts
@@ -0,0 +1,243 @@
+/*
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Ka-Ro electronics TX53 module (LVDS)";
+	compatible = "karo,tx53", "fsl,imx53";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		brightness-levels = <
+			  0  1  2  3  4  5  6  7  8  9
+			 10 11 12 13 14 15 16 17 18 19
+			 20 21 22 23 24 25 26 27 28 29
+			 30 31 32 33 34 35 36 37 38 39
+			 40 41 42 43 44 45 46 47 48 49
+			 50 51 52 53 54 55 56 57 58 59
+			 60 61 62 63 64 65 66 67 68 69
+			 70 71 72 73 74 75 76 77 78 79
+			 80 81 82 83 84 85 86 87 88 89
+			 90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <50>;
+	};
+
+	regulators {
+		reg_lcd_pwr0: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "LVDS0 POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		reg_lcd_pwr1: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "LVDS1 POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen2: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <23 0>;
+		wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	touchscreen1: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti1>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	imx53-tx53-x13x {
+		pinctrl_i2c2: i2c2-grp1 {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_lvds0: lvds0grp {
+			fsl,pins = <
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+			>;
+		};
+
+		pinctrl_lvds1: lvds1grp {
+			fsl,pins = <
+				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
+		};
+
+		pinctrl_eeti1: eeti1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
+			>;
+		};
+
+		pinctrl_eeti2: eeti2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "jeida";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds_timing0>;
+			lvds_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "jeida";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds_timing1>;
+			lvds_timing1: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hsync-len = <60>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vsync-len = <10>;
+				vfront-porch = <7>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx53-voipac-bsb.dts b/src/arm/imx53-voipac-bsb.dts
new file mode 100644
index 000000000000..c17d3ad6dba5
--- /dev/null
+++ b/src/arm/imx53-voipac-bsb.dts
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-voipac-dmm-668.dtsi"
+
+/ {
+	sound {
+		compatible = "fsl,imx53-voipac-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-voipac-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <5>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio>;
+
+		led1 {
+			label = "led-red";
+			gpios = <&gpio3 29 0>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "led-orange";
+			gpios = <&gpio2 31 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-voipac {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SD2_CD */
+				MX53_PAD_EIM_D25__GPIO3_25	0x80000000
+				/* SD2_WP */
+				MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
+			>;
+		};
+
+		led_pin_gpio: led_gpio {
+			fsl,pins = <
+				MX53_PAD_EIM_D29__GPIO3_29	0x80000000
+				MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
+			>;
+		};
+
+		/* Keyboard controller */
+		pinctrl_kpp_1: kppgrp-1 {
+			fsl,pins = <
+				MX53_PAD_GPIO_9__KPP_COL_6	0xe8
+				MX53_PAD_GPIO_4__KPP_COL_7	0xe8
+				MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
+				MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
+				MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
+				MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
+				MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
+				MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
+				MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
+				MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+			>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio3 25 0>;
+	wp-gpios = <&gpio2 19 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&clks 150>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_1>;
+	linux,keymap = <
+			0x0203003b	/* KEY_F1 */
+			0x0603003c	/* KEY_F2 */
+			0x0207003d	/* KEY_F3 */
+			0x0607003e	/* KEY_F4 */
+			>;
+	keypad,num-rows = <8>;
+	keypad,num-columns = <1>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
diff --git a/src/arm/imx53-voipac-dmm-668.dtsi b/src/arm/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 000000000000..ba689fbd0e41
--- /dev/null
+++ b/src/arm/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,277 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+	model = "Voipac i.MX53 X53-DMM-668";
+	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>;
+	};
+
+	memory@b0000000 {
+		device_type = "memory";
+		reg = <0xb0000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 31 0>; /* PEN */
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-voipac {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* Make DA9053 regulator functional */
+				MX53_PAD_GPIO_16__GPIO7_11	0x80000000
+				/* FEC Power enable */
+				MX53_PAD_GPIO_11__GPIO4_1	0x80000000
+				/* FEC RST */
+				MX53_PAD_GPIO_12__GPIO4_2	0x80000000
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
+				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
+			>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <4>;
+	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 2 0>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: dialog@48 {
+		compatible = "dlg,da9053-aa", "dlg,da9052";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1580000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <2370000>;
+				regulator-max-microvolt = <2630000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <2770000>;
+				regulator-max-microvolt = <2780000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <3250000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/src/arm/imx6dl-aristainetos_4.dts b/src/arm/imx6dl-aristainetos_4.dts
new file mode 100644
index 000000000000..9cd06e5e59f0
--- /dev/null
+++ b/src/arm/imx6dl-aristainetos_4.dts
@@ -0,0 +1,85 @@
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos.dtsi"
+
+/ {
+	model = "aristainetos i.MX6 Dual Lite Board 4";
+	compatible = "fsl,imx6dl";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		status = "okay";
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	soc {
+		display0: display@di0 {
+			compatible = "fsl,imx-parallel-display";
+			interface-pix-fmt = "rgb24";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ipu_disp>;
+			status = "okay";
+
+			display-timings {
+				480x800p60 {
+					native-mode;
+					clock-frequency = <30000000>;
+					hactive = <480>;
+					vactive = <800>;
+					hfront-porch = <59>;
+					hback-porch = <10>;
+					hsync-len = <10>;
+					vback-porch = <15>;
+					vfront-porch = <15>;
+					vsync-len = <15>;
+					hsync-active = <1>;
+					vsync-active = <1>;
+				};
+			};
+
+			port {
+				display0_in: endpoint {
+					remote-endpoint = <&ipu1_di0_disp0>;
+				};
+			};
+		};
+	};
+};
+
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
diff --git a/src/arm/imx6dl-aristainetos_7.dts b/src/arm/imx6dl-aristainetos_7.dts
new file mode 100644
index 000000000000..b413e24288dc
--- /dev/null
+++ b/src/arm/imx6dl-aristainetos_7.dts
@@ -0,0 +1,74 @@
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos.dtsi"
+
+/ {
+	model = "aristainetos i.MX6 Dual Lite Board 7";
+	compatible = "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	soc {
+		display0: display@di0 {
+			compatible = "fsl,imx-parallel-display";
+			interface-pix-fmt = "rgb24";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ipu_disp>;
+			status = "okay";
+
+			display-timings {
+				800x480p60 {
+					native-mode;
+					clock-frequency = <33246000>;
+					hactive = <800>;
+					vactive = <480>;
+					hfront-porch = <88>;
+					hback-porch = <88>;
+					hsync-len = <80>;
+					vback-porch = <10>;
+					vfront-porch = <10>;
+					vsync-len = <25>;
+					vsync-active = <1>;
+				};
+			};
+
+			port {
+				display0_in: endpoint {
+					remote-endpoint = <&ipu1_di0_disp0>;
+				};
+			};
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 3000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
diff --git a/src/arm/imx6dl-dfi-fs700-m60.dts b/src/arm/imx6dl-dfi-fs700-m60.dts
new file mode 100644
index 000000000000..994f96a3fb54
--- /dev/null
+++ b/src/arm/imx6dl-dfi-fs700-m60.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_V1__
+#define __DTS_V1__
+/dts-v1/;
+#endif
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dfi-fs700-m60.dtsi"
+
+/ {
+	model = "DFI FS700-M60-6DL i.MX6dl Q7 Board";
+	compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-gw51xx.dts b/src/arm/imx6dl-gw51xx.dts
new file mode 100644
index 000000000000..b2bd022fc6be
--- /dev/null
+++ b/src/arm/imx6dl-gw51xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX";
+	compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-gw52xx.dts b/src/arm/imx6dl-gw52xx.dts
new file mode 100644
index 000000000000..a2e0b73fdd4a
--- /dev/null
+++ b/src/arm/imx6dl-gw52xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
+	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-gw53xx.dts b/src/arm/imx6dl-gw53xx.dts
new file mode 100644
index 000000000000..6844b708d2f8
--- /dev/null
+++ b/src/arm/imx6dl-gw53xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
+	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-gw54xx.dts b/src/arm/imx6dl-gw54xx.dts
new file mode 100644
index 000000000000..be915412f852
--- /dev/null
+++ b/src/arm/imx6dl-gw54xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
+	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-nitrogen6x.dts b/src/arm/imx6dl-nitrogen6x.dts
new file mode 100644
index 000000000000..5f4d33ccc4b3
--- /dev/null
+++ b/src/arm/imx6dl-nitrogen6x.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite Nitrogen6x Board";
+	compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-phytec-pbab01.dts b/src/arm/imx6dl-phytec-pbab01.dts
new file mode 100644
index 000000000000..08e97801494e
--- /dev/null
+++ b/src/arm/imx6dl-phytec-pbab01.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl-phytec-pfla02.dtsi"
+#include "imx6qdl-phytec-pbab01.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board";
+	compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-phytec-pfla02.dtsi b/src/arm/imx6dl-phytec-pfla02.dtsi
new file mode 100644
index 000000000000..964bc2ad3c5d
--- /dev/null
+++ b/src/arm/imx6dl-phytec-pfla02.dtsi
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-pfla02.dtsi"
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 DualLite/Solo";
+	compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/src/arm/imx6dl-rex-basic.dts b/src/arm/imx6dl-rex-basic.dts
new file mode 100644
index 000000000000..b13845c2823b
--- /dev/null
+++ b/src/arm/imx6dl-rex-basic.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-rex.dtsi"
+
+/ {
+	model = "Rex Basic i.MX6 Dual Lite Board";
+	compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
+&ecspi3 {
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/src/arm/imx6dl-riotboard.dts b/src/arm/imx6dl-riotboard.dts
new file mode 100644
index 000000000000..43cb3fd76be7
--- /dev/null
+++ b/src/arm/imx6dl-riotboard.dts
@@ -0,0 +1,538 @@
+/*
+ * Copyright 2014 Iain Paton <ipaton0@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "RIoTboard i.MX6S";
+	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-riotboard-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+			mux-int-port = <1>;
+			mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 31 0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	pmic: pf0100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 8>;
+
+		regulators {
+			reg_vddcore: sw1ab {				/* VDDARM_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_vddsoc: sw1c {				/* VDDSOC_IN */
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_ddr_vtt: sw4 {				/* MIPI conn */
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			reg_5v_600mA: swbst {				/* not used */
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {				/* VREF_DDR */
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1_1v5: vgen1 {				/* not used */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			reg_vgen3_2v8: vgen3 {				/* not used */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clocks = <&clks 116>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 0>;
+	wp-gpios = <&gpio1 2 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	wp-gpios = <&gpio7 1 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	imx6-riotboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
+				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
+				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
+				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0		/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0		/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0		/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0		/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0		/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
+			        MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
+				MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx6dl-sabrelite.dts b/src/arm/imx6dl-sabrelite.dts
new file mode 100644
index 000000000000..2de04479dc35
--- /dev/null
+++ b/src/arm/imx6dl-sabrelite.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-sabrelite.dtsi"
+
+/ {
+	model = "Freescale i.MX6 DualLite SABRE Lite Board";
+	compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-tx6dl-comtft.dts b/src/arm/imx6dl-tx6dl-comtft.dts
new file mode 100644
index 000000000000..913bb9a0466a
--- /dev/null
+++ b/src/arm/imx6dl-tx6dl-comtft.dts
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			native-mode = <&ET070001DM6>;
+
+			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+        };
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/src/arm/imx6dl-tx6u-801x.dts b/src/arm/imx6dl-tx6u-801x.dts
new file mode 100644
index 000000000000..5fe465c2814e
--- /dev/null
+++ b/src/arm/imx6dl-tx6u-801x.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-801x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+        };
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
diff --git a/src/arm/imx6dl-tx6u-811x.dts b/src/arm/imx6dl-tx6u-811x.dts
new file mode 100644
index 000000000000..c275eecc9472
--- /dev/null
+++ b/src/arm/imx6dl-tx6u-811x.dts
@@ -0,0 +1,150 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-811x Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_lcd0_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_lcd1_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+};
+
+&i2c3 {
+	polytouch2: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	imx6dl-tx6u-811x {
+		pinctrl_eeti: eetigrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&kpp {
+	status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds_timing0>;
+			lvds_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "disabled";
+
+		display-timings {
+			native-mode = <&lvds_timing1>;
+			lvds_timing1: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/src/arm/imx6dl-wandboard-revb1.dts b/src/arm/imx6dl-wandboard-revb1.dts
new file mode 100644
index 000000000000..f607d4f1d244
--- /dev/null
+++ b/src/arm/imx6dl-wandboard-revb1.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/src/arm/imx6q-cm-fx6.dts b/src/arm/imx6q-cm-fx6.dts
new file mode 100644
index 000000000000..99b46f8030ad
--- /dev/null
+++ b/src/arm/imx6q-cm-fx6.dts
@@ -0,0 +1,107 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ *
+ * Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "CompuLab CM-FX6";
+	compatible = "compulab,cm-fx6", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat-led {
+			label = "Heartbeat";
+			gpios = <&gpio2 31 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6q-cm-fx6 {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
diff --git a/src/arm/imx6q-dfi-fs700-m60.dts b/src/arm/imx6q-dfi-fs700-m60.dts
new file mode 100644
index 000000000000..fd0ad9a8866c
--- /dev/null
+++ b/src/arm/imx6q-dfi-fs700-m60.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_V1__
+#define __DTS_V1__
+/dts-v1/;
+#endif
+
+#include "imx6q.dtsi"
+#include "imx6qdl-dfi-fs700-m60.dtsi"
+
+/ {
+	model = "DFI FS700-M60-6QD i.MX6qd Q7 Board";
+	compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q";
+};
diff --git a/src/arm/imx6q-dmo-edmqmx6.dts b/src/arm/imx6q-dmo-edmqmx6.dts
new file mode 100644
index 000000000000..4fa254347798
--- /dev/null
+++ b/src/arm/imx6q-dmo-edmqmx6.dts
@@ -0,0 +1,487 @@
+/*
+ * Copyright 2013 Data Modul AG
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Data Modul eDM-QMX6 Board";
+	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		gpio7 = &stmpe_gpio1;
+		gpio8 = &stmpe_gpio2;
+		stmpe-i2c0 = &stmpe1;
+		stmpe-i2c1 = &stmpe2;
+	};
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_switch: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_switch";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 12 0>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_usb_host1: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_host1_en";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 31 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "blue";
+			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-pink {
+			label = "pink";
+			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-red {
+			label = "red";
+			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio1 12 0>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "m25p80";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 0>;
+	phy-supply = <&vgen2_1v2_eth>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2
+		     &pinctrl_stmpe1
+		     &pinctrl_stmpe2
+		     &pinctrl_pfuze>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_1v2_eth: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdd_high_in: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	stmpe1: stmpe1601@40 {
+		compatible = "st,stmpe1601";
+		reg = <0x40>;
+		interrupts = <30 0>;
+		interrupt-parent = <&gpio3>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio1: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	stmpe2: stmpe1601@44 {
+		compatible = "st,stmpe1601";
+		reg = <0x44>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpio5>;
+		vcc-supply = <&sw2_reg>;
+		vio-supply = <&sw2_reg>;
+
+		stmpe_gpio2: stmpe_gpio {
+			#gpio-cells = <2>;
+			compatible = "st,stmpe-gpio";
+		};
+	};
+
+	temp1: ad7414@4c {
+		compatible = "ad,ad7414";
+		reg = <0x4c>;
+	};
+
+	temp2: ad7414@4d {
+		compatible = "ad,ad7414";
+		reg = <0x4d>;
+	};
+
+	rtc: m41t62@68 {
+		compatible = "stm,m41t62";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-dmo-edmqmx6 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi5: ecspi5rp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
+				MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
+				MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
+			>;
+		};
+
+		pinctrl_pfuze: pfuze100grp1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
+			>;
+		};
+
+		pinctrl_stmpe1: stmpe1grp {
+			fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
+		};
+
+		pinctrl_stmpe2: stmpe2grp {
+			fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 8 0>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host1>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/src/arm/imx6q-gk802.dts b/src/arm/imx6q-gk802.dts
new file mode 100644
index 000000000000..703539cf36d3
--- /dev/null
+++ b/src/arm/imx6q-gk802.dts
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2013 Philipp Zabel
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "Zealz GK802";
+	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		recovery-button {
+			label = "recovery";
+			gpios = <&gpio3 16 1>;
+			linux,code = <0x198>; /* KEY_RESTART */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+/* Internal I2C */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
+	eeprom: dm2016@51 {
+		compatible = "sdmc,dm2016";
+		reg = <0x51>;
+	};
+};
+
+/* External I2C via HDMI */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-gk802 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* Recovery button, active-low */
+				MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
+				/* RTL8192CU enable GPIO, active-low */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* External USB-A port (USBOTG) */
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Internal USB port (USBH1), connected to RTL8192CU */
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* External microSD */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 11 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* Internal microSD */
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/src/arm/imx6q-gw51xx.dts b/src/arm/imx6q-gw51xx.dts
new file mode 100644
index 000000000000..8e8bcd8fe0fb
--- /dev/null
+++ b/src/arm/imx6q-gw51xx.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw51xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX";
+	compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
+};
diff --git a/src/arm/imx6q-gw52xx.dts b/src/arm/imx6q-gw52xx.dts
new file mode 100644
index 000000000000..a12c47e5ee05
--- /dev/null
+++ b/src/arm/imx6q-gw52xx.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw52xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX";
+	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx6q-gw53xx.dts b/src/arm/imx6q-gw53xx.dts
new file mode 100644
index 000000000000..d76aaa83dad0
--- /dev/null
+++ b/src/arm/imx6q-gw53xx.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw53xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX";
+	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx6q-gw5400-a.dts b/src/arm/imx6q-gw5400-a.dts
new file mode 100644
index 000000000000..22e6f8e657d2
--- /dev/null
+++ b/src/arm/imx6q-gw5400-a.dts
@@ -0,0 +1,547 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+
+/ {
+	model = "Gateworks Ventana GW5400-A";
+	compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
+
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eth1;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		sky2 = &eth1;
+		ssi0 = &ssi1;
+		spi0 = &ecspi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio1 5 0>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,w25q256";
+		spi-max-frequency = <30000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pciswitch: pex8609@3f {
+		compatible = "plx,pex8609";
+		reg = <0x3f>;
+	};
+
+	pciclkgen: si52147@6b {
+		compatible = "sil,si52147";
+		reg = <0x6b>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer: mma8450@1c {
+		compatible = "fsl,mma8450";
+		reg = <0x1c>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&sw4_reg>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	hdmiin: adv7611@4c {
+		compatible = "adi,adv7611";
+		reg = <0x4c>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>; /* gpio7_12 active low */
+		wakeup-gpios = <&gpio7 12 0>;
+	};
+
+	videoout: adv7393@2a {
+		compatible = "adi,adv7393";
+		reg = <0x2a>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-gw5400-a {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05     0x80000000 /* GPS_PPS */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10   0x80000000 /* user2 led */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
+				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
+			 >;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/src/arm/imx6q-gw54xx.dts b/src/arm/imx6q-gw54xx.dts
new file mode 100644
index 000000000000..6e8f53e92a2d
--- /dev/null
+++ b/src/arm/imx6q-gw54xx.dts
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw54xx.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
+	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx6q-nitrogen6x.dts b/src/arm/imx6q-nitrogen6x.dts
new file mode 100644
index 000000000000..a57866b2e97e
--- /dev/null
+++ b/src/arm/imx6q-nitrogen6x.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6x.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Nitrogen6x Board";
+	compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx6q-rex-pro.dts b/src/arm/imx6q-rex-pro.dts
new file mode 100644
index 000000000000..3c2852b16f78
--- /dev/null
+++ b/src/arm/imx6q-rex-pro.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-rex.dtsi"
+
+/ {
+	model = "Rex Pro i.MX6 Quad Board";
+	compatible = "rex,imx6q-rex-pro", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&ecspi3 {
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf032b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx6q-tx6q-1010-comtft.dts b/src/arm/imx6q-tx6q-1010-comtft.dts
new file mode 100644
index 000000000000..b18fae10b2e3
--- /dev/null
+++ b/src/arm/imx6q-tx6q-1010-comtft.dts
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			native-mode = <&ET070001DM6>;
+
+			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+        };
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
diff --git a/src/arm/imx6q-tx6q-1010.dts b/src/arm/imx6q-tx6q-1010.dts
new file mode 100644
index 000000000000..b58ec9c966c8
--- /dev/null
+++ b/src/arm/imx6q-tx6q-1010.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+        };
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
diff --git a/src/arm/imx6q-tx6q-1020-comtft.dts b/src/arm/imx6q-tx6q-1020-comtft.dts
new file mode 100644
index 000000000000..0bb9a9de62a9
--- /dev/null
+++ b/src/arm/imx6q-tx6q-1020-comtft.dts
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			native-mode = <&ET070001DM6>;
+
+			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+        };
+};
+
+&can1 {
+	status = "disabled";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3>;
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	imx6qdl-tx6 {
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&kpp {
+	status = "disabled";
+};
+
+&reg_can_xcvr {
+	status = "disabled";
+};
+
+&touchscreen {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
diff --git a/src/arm/imx6q-tx6q-1020.dts b/src/arm/imx6q-tx6q-1020.dts
new file mode 100644
index 000000000000..b96d80a35d39
--- /dev/null
+++ b/src/arm/imx6q-tx6q-1020.dts
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1020 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &display;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_3v3>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_1>;
+		status = "okay";
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+        };
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	imx6qdl-tx6 {
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
diff --git a/src/arm/imx6q-tx6q-1110.dts b/src/arm/imx6q-tx6q-1110.dts
new file mode 100644
index 000000000000..88aa1e4c792d
--- /dev/null
+++ b/src/arm/imx6q-tx6q-1110.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+
+	aliases {
+		display = &lvds0;
+		lvds0 = &lvds0;
+		lvds1 = &lvds1;
+	};
+
+	backlight0: backlight0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 0>;
+		power-supply = <&reg_lcd0_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	backlight1: backlight1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		power-supply = <&reg_lcd1_pwr>;
+		/*
+		 * a poor man's way to create a 1:1 relationship between
+		 * the PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+};
+
+&i2c3 {
+	polytouch1: eeti@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eeti>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	imx6q-tx6q-1110 {
+		pinctrl_eeti: eetigrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+			>;
+		};
+	};
+};
+
+&kpp {
+	status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&lvds_timing0>;
+			lvds_timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
+	lvds1: lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "disabled";
+
+		display-timings {
+			native-mode = <&lvds_timing1>;
+			lvds_timing1: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx6q-wandboard-revb1.dts b/src/arm/imx6q-wandboard-revb1.dts
new file mode 100644
index 000000000000..20bf3c282623
--- /dev/null
+++ b/src/arm/imx6q-wandboard-revb1.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revb1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-aristainetos.dtsi b/src/arm/imx6qdl-aristainetos.dtsi
new file mode 100644
index 000000000000..e6d9195a1da7
--- /dev/null
+++ b/src/arm/imx6qdl-aristainetos.dtsi
@@ -0,0 +1,418 @@
+/*
+ * support fot the imx6 based aristainetos board
+ *
+ * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			enable-active-high;
+			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		reg_usbotg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			enable-active-high;
+			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	tmp103: tmp103@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ecspi4 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 20 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
+
+	imx6qdl-aristainetos {
+		pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
+		};
+
+		pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+				MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
+			>;
+		};
+
+		pinctrl_ecspi4: ecspi4grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+				MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+				MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
+				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
+				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
+				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+				MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+				>;
+		};
+
+		pinctrl_gpio: gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+				MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_ipu_disp: ipudisp1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+				>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx6qdl-dfi-fs700-m60.dtsi b/src/arm/imx6qdl-dfi-fs700-m60.dtsi
new file mode 100644
index 000000000000..2c253d6d20bd
--- /dev/null
+++ b/src/arm/imx6qdl-dfi-fs700-m60.dtsi
@@ -0,0 +1,199 @@
+/ {
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dummy_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "dummy-supply";
+		};
+
+		reg_usb_otg_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf040b", "m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+	phy-mode = "rgmii";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-dfi-fs700-m60 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
+				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+			>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 { /* module slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio2 2 0>;
+	status = "okay";
+};
+
+&usdhc3 { /* baseboard slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+};
+
+&usdhc4 { /* eMMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-gw51xx.dtsi b/src/arm/imx6qdl-gw51xx.dtsi
new file mode 100644
index 000000000000..0db15af41cb1
--- /dev/null
+++ b/src/arm/imx6qdl-gw51xx.dtsi
@@ -0,0 +1,379 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		can0 = &can1;
+		ethernet0 = &fec;
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio1 26 0>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5p0v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5P0V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: ltc3676@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: ltc3676__sw1 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: ltc3676__sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: ltc3676__sw3 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: ltc3676__sw4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ltc3676__ldo2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ltc3676__ldo4 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-gw51xx {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x80000000 /* PCIE_RST# */
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
+			 >;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 0 0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-gw52xx.dtsi b/src/arm/imx6qdl-gw52xx.dtsi
new file mode 100644
index 000000000000..234e7b755232
--- /dev/null
+++ b/src/arm/imx6qdl-gw52xx.dtsi
@@ -0,0 +1,531 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		ethernet0 = &fec;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio1 26 0>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		/* remove this fixed regulator once ltc3676__sw2 driver available */
+		reg_1p8v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5p0v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "5P0V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pciswitch: pex8609@3f {
+		compatible = "plx,pex8609";
+		reg = <0x3f>;
+	};
+
+	pmic: ltc3676@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: ltc3676__sw1 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: ltc3676__sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: ltc3676__sw3 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: ltc3676__sw4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ltc3676__ldo2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ltc3676__ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ltc3676__ldo4 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer: fxos8700@1e {
+		compatible = "fsl,fxos8700";
+		reg = <0x13>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>; /* gpio7_12 active low */
+		wakeup-gpios = <&gpio7 12 0>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-gw52xx {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31   0x80000000 /* VIDDEC_PDN# */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1     0x000130b0 /* AUD4_MCK */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x80000000 /* USB_SEL_PCI */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12   0x80000000 /* TOUCH_IRQ# */
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x80000000 /* user3 led */
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x80000000 /* LVDS_TCH# */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00  0x80000000 /* SD3_CD# */
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11  0x80000000 /* UART2_EN# */
+			 >;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-gw53xx.dtsi b/src/arm/imx6qdl-gw53xx.dtsi
new file mode 100644
index 000000000000..143f84f7812c
--- /dev/null
+++ b/src/arm/imx6qdl-gw53xx.dtsi
@@ -0,0 +1,576 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		can0 = &can1;
+		ethernet0 = &fec;
+		ethernet1 = &eth1;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		sky2 = &eth1;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio1 26 0>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		/* remove when pmic 1p8 regulator available */
+		reg_1p8v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pciclkgen: si53156@6b {
+		compatible = "sil,si53156";
+		reg = <0x6b>;
+	};
+
+	pciswitch: pex8606@3f {
+		compatible = "plx,pex8606";
+		reg = <0x3f>;
+	};
+
+	pmic: ltc3676@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+
+		regulators {
+			/* VDD_SOC */
+			sw1_reg: ltc3676__sw1 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 */
+			sw2_reg: ltc3676__sw2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM */
+			sw3_reg: ltc3676__sw3 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR */
+			sw4_reg: ltc3676__sw4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 */
+			ldo2_reg: ltc3676__ldo2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 */
+			ldo3_reg: ltc3676__ldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH */
+			ldo4_reg: ltc3676__ldo4 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer: fxos8700@1e {
+		compatible = "fsl,fxos8700";
+		reg = <0x1e>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	hdmiin: adv7611@4c {
+		compatible = "adi,adv7611";
+		reg = <0x4c>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 2>; /* gpio1_11 active low */
+		wakeup-gpios = <&gpio1 11 0>;
+	};
+
+	videoout: adv7393@2a {
+		compatible = "adi,adv7393";
+		reg = <0x2a>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-gw53xx {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19    0x80000000 /* PCIE6EXP_DIO0 */
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18    0x80000000 /* PCIE6EXP_DIO1 */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27  0x80000000 /* GPS_SHDN */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26  0x80000000 /* GPS_PPS */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08     0x80000000 /* PMIC_IRQ# */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09     0x80000000 /* HUB_RST# */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* PCIE_WDIS# */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05    0x80000000 /* ACCEL_IRQ# */
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14   0x80000000 /* USBOTG_OC# */
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11    0x80000000 /* TOUCH_IRQ# */
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00   0x80000000 /* SD3_DET# */
+			 >;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x80000000
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-gw54xx.dtsi b/src/arm/imx6qdl-gw54xx.dtsi
new file mode 100644
index 000000000000..16e7ad3d98ad
--- /dev/null
+++ b/src/arm/imx6qdl-gw54xx.dtsi
@@ -0,0 +1,602 @@
+/*
+ * Copyright 2013 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		can0 = &can1;
+		ethernet0 = &fec;
+		ethernet1 = &eth1;
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		sky2 = &eth1;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+		usdhc2 = &usdhc3;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		gpios = <&gpio1 26 0>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 30 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hwmon: gsc@29 {
+		compatible = "gw,gsp";
+		reg = <0x29>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pciswitch: pex8609@3f {
+		compatible = "plx,pex8609";
+		reg = <0x3f>;
+	};
+
+	pciclkgen: si52147@6b {
+		compatible = "sil,si52147";
+		reg = <0x6b>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer: fxos8700@1e {
+		compatible = "fsl,fxos8700";
+		reg = <0x1e>;
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&sw4_reg>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	hdmiin: adv7611@4c {
+		compatible = "adi,adv7611";
+		reg = <0x4c>;
+	};
+
+	touchscreen: egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 2>; /* gpio7_12 active low */
+		wakeup-gpios = <&gpio7 12 0>;
+	};
+
+	videoout: adv7393@2a {
+		compatible = "adi,adv7393";
+		reg = <0x2a>;
+	};
+
+	videoin: adv7180@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-gw54xx {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26  0x80000000 /* GPS_PPS */
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
+				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
+			 >;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x80000000
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 0>;
+	status = "okay";
+
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
+	};
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-nitrogen6x.dtsi b/src/arm/imx6qdl-nitrogen6x.dtsi
new file mode 100644
index 000000000000..42ff525ebe13
--- /dev/null
+++ b/src/arm/imx6qdl-nitrogen6x.dtsi
@@ -0,0 +1,425 @@
+/*
+ * Copyright 2013 Boundary Devices, Inc.
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6x-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-nitrogen6x {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-phytec-pbab01.dtsi b/src/arm/imx6qdl-phytec-pbab01.dtsi
new file mode 100644
index 000000000000..584721264121
--- /dev/null
+++ b/src/arm/imx6qdl-phytec-pbab01.dtsi
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	chosen {
+		linux,stdout-path = &uart4;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tlv320@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+	};
+
+	stmpe@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,rtc8564";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+};
diff --git a/src/arm/imx6qdl-phytec-pfla02.dtsi b/src/arm/imx6qdl-phytec-pfla02.dtsi
new file mode 100644
index 000000000000..2694aa84e187
--- /dev/null
+++ b/src/arm/imx6qdl-phytec-pfla02.dtsi
@@ -0,0 +1,357 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Phytec phyFLEX-i.MX6 Ouad";
+	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 15 0>;
+		};
+
+		reg_usb_h1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 0 0>;
+		};
+	};
+
+	gpio_leds: leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "phyflex:green";
+			gpios = <&gpio1 30 0>;
+		};
+
+		red {
+			label = "phyflex:red";
+			gpios = <&gpio2 31 0>;
+		};
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 0>;
+
+	flash@0 {
+		compatible = "m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	pmic@58 {
+		compatible = "dialog,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 0x8>; /* active-low GPIO4_17 */
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <730000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_buckmem_reg: bmem {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_reg: bio {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_pmic_io_reg: ldo6 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_sd0_reg: ldo9 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_sd1_reg: ldo10 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_mx6_high_reg: ldo11 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-phytec-pfla02 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
+				MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000 /* PMIC interrupt */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x80000000
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x80000000
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_cdwp: usdhc3cdwp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vdd_eth_io_reg>;
+	status = "disabled";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 0>;
+	wp-gpios = <&gpio1 2 0>;
+	status = "disabled";
+};
+
+&usdhc3 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_usdhc3
+		     &pinctrl_usdhc3_cdwp>;
+        cd-gpios = <&gpio1 27 0>;
+        wp-gpios = <&gpio1 29 0>;
+        status = "disabled";
+};
diff --git a/src/arm/imx6qdl-rex.dtsi b/src/arm/imx6qdl-rex.dtsi
new file mode 100644
index 000000000000..df7bcf86c156
--- /dev/null
+++ b/src/arm/imx6qdl-rex.dtsi
@@ -0,0 +1,357 @@
+/*
+ * Copyright 2014 FEDEVEL, Inc.
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usbh1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbotg>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led0: usr {
+			label = "usr";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-rex-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-rex-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "at,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-rex {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x030b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				/* CS */
+				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x000b1
+			>;
+		};
+
+		pinctrl_ecspi3: ecspi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+				/* CS */
+				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				/* Phy reset */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				/* user led */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x10b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x10b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				/* CD */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* WP */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1f0b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				/* CD */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+				/* WP */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1f0b0
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-sabrelite.dtsi b/src/arm/imx6qdl-sabrelite.dtsi
new file mode 100644
index 000000000000..0a36129152e0
--- /dev/null
+++ b/src/arm/imx6qdl-sabrelite.dtsi
@@ -0,0 +1,426 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-sabrelite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-sabrelite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6q-sabrelite {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* SGTL5000 sys_mclk */
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x000b1	/* CS */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				/* Phy reset */
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC	0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0	/* CD */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0	/* WP */
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 0>;
+	wp-gpios = <&gpio7 1 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio2 6 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-tx6.dtsi b/src/arm/imx6qdl-tx6.dtsi
new file mode 100644
index 000000000000..f02b80b41d4f
--- /dev/null
+++ b/src/arm/imx6qdl-tx6.dtsi
@@ -0,0 +1,696 @@
+/*
+ * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		can0 = &can2;
+		can1 = &can1;
+		ethernet0 = &fec;
+		lcdif_23bit_pins_a = &pinctrl_disp0_1;
+		lcdif_24bit_pins_a = &pinctrl_disp0_2;
+		pwm0 = &pwm1;
+		pwm1 = &pwm2;
+		reg_can_xcvr = &reg_can_xcvr;
+		stk5led = &user_led;
+		usbotg = &usbotg;
+		sdhc0 = &usdhc1;
+		sdhc1 = &usdhc2;
+	};
+
+	memory {
+		reg = <0 0>; /* will be filled by U-Boot */
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user {
+			label = "Heartbeat";
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3_etn: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3_ETN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_etnphy_power>;
+			gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_2v5: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2V5";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3v3: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+			enable-active-low;
+		};
+
+		reg_lcd0_pwr: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "LCD0 POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd0_pwr>;
+			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_lcd1_pwr: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "LCD1 POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd1_pwr>;
+			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "usbh1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1_vbus>;
+			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usbotg_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "usbotg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbotg_vbus>;
+			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audmux>;
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <
+		&gpio2 30 GPIO_ACTIVE_HIGH
+		&gpio3 19 GPIO_ACTIVE_HIGH
+	>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+	};
+
+	spidev1: spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	phy-supply = <&reg_3v3_etn>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	fsl,no-blockmark-swap;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2v5>;
+		VDDIO-supply = <&reg_3v3>;
+		clocks = <&mclk>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 0>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		linux,wakeup;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 0>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <660>;
+		linux,wakeup;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-tx6 {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* LED */
+				MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1 /* PWR BTN */
+			>;
+		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW1__AUD5_RXD		0x130b0 /* SSI1_RXD */
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0 /* SSI1_TXD */
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0 /* SSI1_CLK */
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0 /* SSI1_FS */
+			>;
+		};
+
+		pinctrl_disp0_1: disp0grp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				/* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_disp0_2: disp0grp-2 {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x0b0b0
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x0b0b0
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x0b0b0
+				MX6QDL_PAD_GPIO_19__ECSPI1_RDY		0x0b0b0
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x0b0b0 /* SPI CS0 */
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x0b0b0 /* SPI CS1 */
+			>;
+		};
+
+		pinctrl_edt_ft5x06: edt-ft5x06grp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* Interrupt */
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22  	0x1b0b0 /* Reset */
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21  	0x1b0b0 /* Wake */
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			>;
+		};
+
+		pinctrl_etnphy_power: etnphy-pwrgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1 /* ETN PHY POWER */
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+				MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b0 /* Flexcan XCVR enable */
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE    	0x0b0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE    	0x0b0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B  	0x0b0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B  	0x0b0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B     	0x0b0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B     	0x0b0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00  	0x0b0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01  	0x0b0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02  	0x0b0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03  	0x0b0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04  	0x0b0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05  	0x0b0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06  	0x0b0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07  	0x0b0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__KEY_COL6		0x1b0b1
+				MX6QDL_PAD_GPIO_4__KEY_COL7		0x1b0b1
+				MX6QDL_PAD_KEY_COL2__KEY_COL2		0x1b0b1
+				MX6QDL_PAD_KEY_COL3__KEY_COL3		0x1b0b1
+				MX6QDL_PAD_GPIO_2__KEY_ROW6		0x1b0b1
+				MX6QDL_PAD_GPIO_5__KEY_ROW7		0x1b0b1
+				MX6QDL_PAD_KEY_ROW2__KEY_ROW2		0x1b0b1
+				MX6QDL_PAD_KEY_ROW3__KEY_ROW3		0x1b0b1
+			>;
+		};
+
+		pinctrl_lcd0_pwr: lcd0-pwrgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1 /* LCD Reset */
+			>;
+		};
+
+		pinctrl_lcd1_pwr: lcd1-pwrgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* LCD Power Enable */
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_tsc2007: tsc2007grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0 /* Interrupt */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1_rtscts: uart1_rtsctsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT1__UART1_RTS_B	0x1b0b1
+				MX6QDL_PAD_SD3_DAT0__UART1_CTS_B	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2_rtscts: uart2_rtsctsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+				MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3_rtscts: uart3_rtsctsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT3__UART3_CTS_B	0x1b0b1
+				MX6QDL_PAD_SD3_RST__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh1_vbus: usbh1-vbusgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b0 /* USBH1_VBUSEN */
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x17059
+			>;
+		};
+
+		pinctrl_usbotg_vbus: usbotg-vbusgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* USBOTG_VBUSEN */
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+				MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x070b1
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x070b1
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x070b1
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x070b1
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x070b1
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x070b1
+				MX6QDL_PAD_SD3_CLK__GPIO7_IO03		0x170b0 /* SD2 CD */
+			>;
+		};
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	/* sample keymap */
+	/* row/col 0,1 are mapped to KPP row/col 6,7 */
+	linux,keymap = <
+		MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
+		MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
+		MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
+		MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
+		MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
+		MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
+		MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
+		MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
+		MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
+		MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
+		MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
+	>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	#pwm-cells = <3>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio7 2 0>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio7 3 0>;
+	fsl,wp-controller;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-wandboard-revb1.dtsi b/src/arm/imx6qdl-wandboard-revb1.dtsi
new file mode 100644
index 000000000000..ef7fa62b9898
--- /dev/null
+++ b/src/arm/imx6qdl-wandboard-revb1.dtsi
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* GPIO_0_CLKO */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* WL_REF_ON */
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x0f0b0		/* WL_RST_N */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+				MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x80000000	/* BT_ON */
+				MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x80000000	/* BT_WAKE */
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x80000000	/* BT_HOST_WAKE */				
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-wandboard-revc1.dtsi b/src/arm/imx6qdl-wandboard-revc1.dtsi
new file mode 100644
index 000000000000..8d893a78cdf0
--- /dev/null
+++ b/src/arm/imx6qdl-wandboard-revc1.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "imx6qdl-wandboard.dtsi"
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-wandboard {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* GPIO_0_CLKO */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* uSDHC1 CD */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x0f0b0		/* WIFI_ON (reset, active low) */
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x000b0		/* WL_REG_ON (unused) */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x80000000	/* WL_HOST_WAKE, input */
+				MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x0f0b0		/* GPIO5_IO31 (Wifi Power Enable) */
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
+				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x80000000	/* BT_ON */
+				MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x80000000	/* BT_WAKE */
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x80000000	/* BT_HOST_WAKE */
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x80000000	/* RGMII_nRST */
+			>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	status = "okay";
+};
diff --git a/src/arm/imx6sx-pinfunc.h b/src/arm/imx6sx-pinfunc.h
new file mode 100644
index 000000000000..bb9c6b78cb97
--- /dev/null
+++ b/src/arm/imx6sx-pinfunc.h
@@ -0,0 +1,1544 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6SX_PINFUNC_H
+#define __DTS_IMX6SX_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL                            0x0014 0x035C 0x07A8 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT                      0x0014 0x035C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK                          0x0014 0x035C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT                            0x0014 0x035C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY                      0x0014 0x035C 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0                          0x0014 0x035C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5               0x0014 0x035C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1                           0x0014 0x035C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA                            0x0018 0x0360 0x07AC 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B                      0x0018 0x0360 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK                        0x0018 0x0360 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO01__CCM_STOP                            0x0018 0x0360 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B                        0x0018 0x0360 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1                          0x0018 0x0360 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL           0x0018 0x0360 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0                           0x0018 0x0360 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL                            0x001C 0x0364 0x07B0 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B                         0x001C 0x0364 0x0864 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK                           0x001C 0x0364 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK                     0x001C 0x0364 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B                        0x001C 0x0364 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2                          0x001C 0x0364 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B                        0x001C 0x0364 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO02__PHY_TDI                             0x001C 0x0364 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA                            0x0020 0x0368 0x07B4 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP                           0x0020 0x0368 0x0868 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M                   0x0020 0x0368 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK                     0x0020 0x0368 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B                        0x0020 0x0368 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3                          0x0020 0x0368 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP                        0x0020 0x0368 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO03__PHY_TCK                             0x0020 0x0368 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_RX                            0x0024 0x036C 0x0830 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_TX                            0x0024 0x036C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B                      0x0024 0x036C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC                           0x0024 0x036C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT                      0x0024 0x036C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2                      0x0024 0x036C 0x076C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4                          0x0024 0x036C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP                        0x0024 0x036C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO04__PHY_TMS                             0x0024 0x036C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO05__UART1_RX                            0x0028 0x0370 0x0830 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO05__UART1_TX                            0x0028 0x0370 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT                      0x0028 0x0370 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO                          0x0028 0x0370 0x0764 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                   0x0028 0x0370 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1                      0x0028 0x0370 0x0760 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5                          0x0028 0x0370 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK                      0x0028 0x0370 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO05__PHY_TDO                             0x0028 0x0370 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_RX                            0x002C 0x0374 0x0838 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_TX                            0x002C 0x0374 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B                         0x002C 0x0374 0x086C 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC                           0x002C 0x0374 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK                           0x002C 0x0374 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B                         0x002C 0x0374 0x082C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6                          0x002C 0x0374 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                    0x002C 0x0374 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED     0x002C 0x0374 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART2_RX                            0x0030 0x0378 0x0838 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART2_TX                            0x0030 0x0378 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44                       0x0030 0x0378 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC                         0x0034 0x037C 0x0860 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B                        0x0034 0x037C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                    0x0034 0x037C 0x081C 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY                        0x0034 0x037C 0x069C 0x3 0x1
+#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B                         0x0034 0x037C 0x0834 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8                          0x0034 0x037C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                    0x0034 0x037C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT                           0x0034 0x037C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43                       0x0034 0x037C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR                        0x0038 0x0380 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42                       0x0038 0x0380 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID                      0x003C 0x0384 0x0624 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK                       0x003C 0x0384 0x0828 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT                            0x003C 0x0384 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1                            0x003C 0x0384 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD                          0x003C 0x0384 0x070C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10                         0x003C 0x0384 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB                     0x003C 0x0384 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3                   0x003C 0x0384 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41                       0x003C 0x0384 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC                         0x0040 0x0388 0x085C 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN                            0x0040 0x0388 0x0824 0x1 0x2
+#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT                            0x0040 0x0388 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1                           0x0040 0x0388 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO11__MLB_DATA                            0x0040 0x0388 0x07EC 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11                         0x0040 0x0388 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0                 0x0040 0x0388 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2                   0x0040 0x0388 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40                       0x0040 0x0388 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR                        0x0044 0x038C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT                           0x0044 0x038C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT                            0x0044 0x038C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2                           0x0044 0x038C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO12__MLB_CLK                             0x0044 0x038C 0x07E8 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12                         0x0044 0x038C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1                 0x0044 0x038C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1                   0x0044 0x038C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39                       0x0044 0x038C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY                      0x0048 0x0390 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID                      0x0048 0x0390 0x0628 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT                            0x0048 0x0390 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2                            0x0048 0x0390 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO13__MLB_SIG                             0x0048 0x0390 0x07F0 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13                         0x0048 0x0390 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2                 0x0048 0x0390 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0                   0x0048 0x0390 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38                       0x0048 0x0390 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2                         0x004C 0x0394 0x06A8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK                         0x004C 0x0394 0x078C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC                     0x004C 0x0394 0x0684 0x2 0x1
+#define MX6SX_PAD_CSI_DATA00__I2C1_SCL                            0x004C 0x0394 0x07A8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA00__UART6_RI_B                          0x004C 0x0394 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14                         0x004C 0x0394 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23                        0x004C 0x0394 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK                        0x004C 0x0394 0x0800 0x7 0x0
+#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4                         0x004C 0x0394 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37                       0x004C 0x0394 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3                         0x0050 0x0398 0x06AC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS                          0x0050 0x0398 0x077C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS                    0x0050 0x0398 0x0688 0x2 0x1
+#define MX6SX_PAD_CSI_DATA01__I2C1_SDA                            0x0050 0x0398 0x07AC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B                         0x0050 0x0398 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15                         0x0050 0x0398 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22                        0x0050 0x0398 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC                        0x0050 0x0398 0x0804 0x7 0x0
+#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5                         0x0050 0x0398 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38                       0x0050 0x0398 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4                         0x0054 0x039C 0x06B0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK                         0x0054 0x039C 0x0788 0x1 0x1
+#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC                     0x0054 0x039C 0x067C 0x2 0x1
+#define MX6SX_PAD_CSI_DATA02__KPP_COL_5                           0x0054 0x039C 0x07C8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B                         0x0054 0x039C 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16                         0x0054 0x039C 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21                        0x0054 0x039C 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK                        0x0054 0x039C 0x07F4 0x7 0x0
+#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6                         0x0054 0x039C 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39                       0x0054 0x039C 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5                         0x0058 0x03A0 0x06B4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS                          0x0058 0x03A0 0x0778 0x1 0x1
+#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS                    0x0058 0x03A0 0x0680 0x2 0x1
+#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5                           0x0058 0x03A0 0x07D4 0x3 0x0
+#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B                         0x0058 0x03A0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17                         0x0058 0x03A0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20                        0x0058 0x03A0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC                        0x0058 0x03A0 0x07FC 0x7 0x0
+#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7                         0x0058 0x03A0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40                       0x0058 0x03A0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6                         0x005C 0x03A4 0x06B8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA04__ESAI_TX1                            0x005C 0x03A4 0x0794 0x1 0x1
+#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT                           0x005C 0x03A4 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_DATA04__KPP_COL_6                           0x005C 0x03A4 0x07CC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_RX                            0x005C 0x03A4 0x0858 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_TX                            0x005C 0x03A4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18                         0x005C 0x03A4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19                        0x005C 0x03A4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA04__PWM5_OUT                            0x005C 0x03A4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8                         0x005C 0x03A4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41                       0x005C 0x03A4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7                         0x0060 0x03A8 0x06BC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1                        0x0060 0x03A8 0x07A0 0x1 0x1
+#define MX6SX_PAD_CSI_DATA05__SPDIF_IN                            0x0060 0x03A8 0x0824 0x2 0x1
+#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6                           0x0060 0x03A8 0x07D8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_RX                            0x0060 0x03A8 0x0858 0x4 0x1
+#define MX6SX_PAD_CSI_DATA05__UART6_TX                            0x0060 0x03A8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19                         0x0060 0x03A8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18                        0x0060 0x03A8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA05__PWM6_OUT                            0x0060 0x03A8 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9                         0x0060 0x03A8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42                       0x0060 0x03A8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8                         0x0064 0x03AC 0x06C0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3                        0x0064 0x03AC 0x0798 0x1 0x1
+#define MX6SX_PAD_CSI_DATA06__I2C4_SCL                            0x0064 0x03AC 0x07C0 0x2 0x2
+#define MX6SX_PAD_CSI_DATA06__KPP_COL_7                           0x0064 0x03AC 0x07D0 0x3 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B                         0x0064 0x03AC 0x0854 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20                         0x0064 0x03AC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17                        0x0064 0x03AC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT                           0x0064 0x03AC 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10                        0x0064 0x03AC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43                       0x0064 0x03AC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9                         0x0068 0x03B0 0x06C4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
+#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11                        0x0068 0x03B0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44                       0x0068 0x03B0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC                           0x006C 0x03B4 0x0700 0x0 0x0
+#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0                             0x006C 0x03B4 0x0790 0x1 0x1
+#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                      0x006C 0x03B4 0x0678 0x2 0x1
+#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B                          0x006C 0x03B4 0x0844 0x3 0x2
+#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT                             0x006C 0x03B4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22                          0x006C 0x03B4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25                         0x006C 0x03B4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0                       0x006C 0x03B4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2                          0x006C 0x03B4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35                        0x006C 0x03B4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK                             0x0070 0x03B8 0x0000 0x0 0x0
+#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK                        0x0070 0x03B8 0x0784 0x1 0x1
+#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT                        0x0070 0x03B8 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_MCLK__UART4_RX                              0x0070 0x03B8 0x0848 0x3 0x2
+#define MX6SX_PAD_CSI_MCLK__UART4_TX                              0x0070 0x03B8 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT                        0x0070 0x03B8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23                           0x0070 0x03B8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26                          0x0070 0x03B8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD                            0x0070 0x03B8 0x070C 0x7 0x0
+#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1                           0x0070 0x03B8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34                         0x0070 0x03B8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK                         0x0074 0x03BC 0x0704 0x0 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                      0x0074 0x03BC 0x0780 0x1 0x1
+#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK                         0x0074 0x03BC 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_RX                            0x0074 0x03BC 0x0848 0x3 0x3
+#define MX6SX_PAD_CSI_PIXCLK__UART4_TX                            0x0074 0x03BC 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT                      0x0074 0x03BC 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24                         0x0074 0x03BC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27                        0x0074 0x03BC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK                      0x0074 0x03BC 0x0784 0x7 0x2
+#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK                            0x0074 0x03BC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33                       0x0074 0x03BC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
+#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
+#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0                       0x0078 0x03C0 0x07F8 0x7 0x0
+#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3                          0x0078 0x03C0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36                        0x0078 0x03C0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_COL__ENET1_COL                            0x007C 0x03C4 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_COL__ENET2_MDC                            0x007C 0x03C4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC                      0x007C 0x03C4 0x0654 0x2 0x1
+#define MX6SX_PAD_ENET1_COL__UART1_RI_B                           0x007C 0x03C4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK                        0x007C 0x03C4 0x0828 0x4 0x1
+#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0                           0x007C 0x03C4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23                         0x007C 0x03C4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16                       0x007C 0x03C4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37                        0x007C 0x03C4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31                   0x007C 0x03C4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET1_CRS                            0x0080 0x03C8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO                           0x0080 0x03C8 0x0770 0x1 0x1
+#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD                      0x0080 0x03C8 0x0648 0x2 0x1
+#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B                          0x0080 0x03C8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK                           0x0080 0x03C8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1                           0x0080 0x03C8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22                         0x0080 0x03C8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17                       0x0080 0x03C8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36                        0x0080 0x03C8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30                   0x0080 0x03C8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET1_MDC                            0x0084 0x03CC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET2_MDC                            0x0084 0x03CC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS                     0x0084 0x03CC 0x0638 0x2 0x1
+#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT                       0x0084 0x03CC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT                            0x0084 0x03CC 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2                           0x0084 0x03CC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR                         0x0084 0x03CC 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_MDC__PWM7_OUT                             0x0084 0x03CC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO                          0x0088 0x03D0 0x0764 0x0 0x1
+#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO                          0x0088 0x03D0 0x0770 0x1 0x2
+#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK                         0x0088 0x03D0 0x0000 0x2 0x0
+#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT                      0x0088 0x03D0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT                           0x0088 0x03D0 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3                          0x0088 0x03D0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC                         0x0088 0x03D0 0x0860 0x6 0x1
+#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT                            0x0088 0x03D0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      0x008C 0x03D4 0x0768 0x0 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M                 0x008C 0x03D4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS                  0x008C 0x03D4 0x0658 0x2 0x1
+#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B                       0x008C 0x03D4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT                         0x008C 0x03D4 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4                        0x008C 0x03D4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21                      0x008C 0x03D4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18                    0x008C 0x03D4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK                      0x0090 0x03D8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5                        0x0090 0x03D8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20                      0x0090 0x03D8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19                    0x0090 0x03D8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34                     0x0090 0x03D8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28                0x0090 0x03D8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_COL__ENET2_COL                            0x0094 0x03DC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_COL__ENET1_MDC                            0x0094 0x03DC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC                      0x0094 0x03DC 0x064C 0x2 0x1
+#define MX6SX_PAD_ENET2_COL__UART1_RX                             0x0094 0x03DC 0x0830 0x3 0x2
+#define MX6SX_PAD_ENET2_COL__UART1_TX                             0x0094 0x03DC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_COL__SPDIF_IN                             0x0094 0x03DC 0x0824 0x4 0x3
+#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6                           0x0094 0x03DC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID                       0x0094 0x03DC 0x0624 0x6 0x1
+#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20                       0x0094 0x03DC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33                        0x0094 0x03DC 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27                   0x0094 0x03DC 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET2_CRS                            0x0098 0x03E0 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO                           0x0098 0x03E0 0x0764 0x1 0x2
+#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                     0x0098 0x03E0 0x0650 0x2 0x1
+#define MX6SX_PAD_ENET2_CRS__UART1_RX                             0x0098 0x03E0 0x0830 0x3 0x3
+#define MX6SX_PAD_ENET2_CRS__UART1_TX                             0x0098 0x03E0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_CRS__MLB_SIG                              0x0098 0x03E0 0x07F0 0x4 0x1
+#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7                           0x0098 0x03E0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID                       0x0098 0x03E0 0x0628 0x6 0x1
+#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21                       0x0098 0x03E0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32                        0x0098 0x03E0 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26                   0x0098 0x03E0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK                      0x009C 0x03E4 0x0774 0x0 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                 0x009C 0x03E4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL                          0x009C 0x03E4 0x07B8 0x2 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B                       0x009C 0x03E4 0x082C 0x3 0x2
+#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA                          0x009C 0x03E4 0x07EC 0x4 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8                        0x009C 0x03E4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC                       0x009C 0x03E4 0x085C 0x6 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22                    0x009C 0x03E4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31                     0x009C 0x03E4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25                0x009C 0x03E4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23                    0x00A0 0x03E8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30                     0x00A0 0x03E8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24                0x00A0 0x03E8 0x0000 0x9 0x0
+#define MX6SX_PAD_KEY_COL0__KPP_COL_0                             0x00A4 0x03EC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B                           0x00A4 0x03EC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL0__UART6_RTS_B                           0x00A4 0x03EC 0x0854 0x2 0x2
+#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK                           0x00A4 0x03EC 0x0710 0x3 0x0
+#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC                       0x00A4 0x03EC 0x066C 0x4 0x0
+#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10                           0x00A4 0x03EC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1                      0x00A4 0x03EC 0x0820 0x6 0x1
+#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK                          0x00A4 0x03EC 0x0814 0x7 0x0
+#define MX6SX_PAD_KEY_COL0__VADC_DATA_0                           0x00A4 0x03EC 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_COL1__KPP_COL_1                             0x00A8 0x03F0 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B                        0x00A8 0x03F0 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_RX                              0x00A8 0x03F0 0x0858 0x2 0x2
+#define MX6SX_PAD_KEY_COL1__UART6_TX                              0x00A8 0x03F0 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO                           0x00A8 0x03F0 0x0714 0x3 0x0
+#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                      0x00A8 0x03F0 0x0670 0x4 0x0
+#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11                           0x00A8 0x03F0 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET                          0x00A8 0x03F0 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC                          0x00A8 0x03F0 0x0818 0x7 0x0
+#define MX6SX_PAD_KEY_COL2__KPP_COL_2                             0x00AC 0x03F4 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B                           0x00AC 0x03F4 0x0874 0x1 0x1
+#define MX6SX_PAD_KEY_COL2__UART5_RTS_B                           0x00AC 0x03F4 0x084C 0x2 0x2
+#define MX6SX_PAD_KEY_COL2__CAN1_TX                               0x00AC 0x03F4 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL2__CANFD_TX1                             0x00AC 0x03F4 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12                           0x00AC 0x03F4 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30                          0x00AC 0x03F4 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY                            0x00AC 0x03F4 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL3__KPP_COL_3                             0x00B0 0x03F8 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL                           0x00B0 0x03F8 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_RX                              0x00B0 0x03F8 0x0850 0x2 0x2
+#define MX6SX_PAD_KEY_COL3__UART5_TX                              0x00B0 0x03F8 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL3__CAN2_TX                               0x00B0 0x03F8 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL3__CANFD_TX2                             0x00B0 0x03F8 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13                           0x00B0 0x03F8 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28                          0x00B0 0x03F8 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2                            0x00B0 0x03F8 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL4__KPP_COL_4                             0x00B4 0x03FC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL4__ENET2_MDC                             0x00B4 0x03FC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL4__I2C3_SCL                              0x00B4 0x03FC 0x07B8 0x2 0x2
+#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL                           0x00B4 0x03FC 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC                       0x00B4 0x03FC 0x0664 0x4 0x0
+#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14                           0x00B4 0x03FC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL4__WEIM_CRE                              0x00B4 0x03FC 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
+#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
+#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0                      0x00B8 0x0400 0x081C 0x6 0x1
+#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0                        0x00B8 0x0400 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__GPU_IDLE                              0x00B8 0x0400 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1                             0x00BC 0x0404 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT                        0x00BC 0x0404 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW1__UART6_RX                              0x00BC 0x0404 0x0858 0x2 0x3
+#define MX6SX_PAD_KEY_ROW1__UART6_TX                              0x00BC 0x0404 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0                            0x00BC 0x0404 0x071C 0x3 0x0
+#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                       0x00BC 0x0404 0x065C 0x4 0x0
+#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16                           0x00BC 0x0404 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31                          0x00BC 0x0404 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0                        0x00BC 0x0404 0x080C 0x7 0x0
+#define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
+#define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
+#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29                          0x00C0 0x0408 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3                            0x00C0 0x0408 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3                             0x00C4 0x040C 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL                           0x00C4 0x040C 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW3__UART5_RX                              0x00C4 0x040C 0x0850 0x2 0x3
+#define MX6SX_PAD_KEY_ROW3__UART5_TX                              0x00C4 0x040C 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW3__CAN2_RX                               0x00C4 0x040C 0x0690 0x3 0x1
+#define MX6SX_PAD_KEY_ROW3__CANFD_RX2                             0x00C4 0x040C 0x0698 0x4 0x1
+#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18                           0x00C4 0x040C 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B                          0x00C4 0x040C 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1                            0x00C4 0x040C 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4                             0x00C8 0x0410 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO                            0x00C8 0x0410 0x0770 0x1 0x3
+#define MX6SX_PAD_KEY_ROW4__I2C3_SDA                              0x00C8 0x0410 0x07BC 0x2 0x2
+#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL                           0x00C8 0x0410 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS                      0x00C8 0x0410 0x0668 0x4 0x0
+#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19                           0x00C8 0x0410 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN                     0x00C8 0x0410 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC                          0x00C8 0x0410 0x0810 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK                            0x00CC 0x0414 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN                         0x00CC 0x0414 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC                       0x00CC 0x0414 0x0634 0x2 0x1
+#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN                  0x00CC 0x0414 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16                          0x00CC 0x0414 0x06DC 0x4 0x0
+#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0                            0x00CC 0x0414 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_CLK__USDHC1_WP                             0x00CC 0x0414 0x0868 0x6 0x0
+#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16                        0x00CC 0x0414 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0                           0x00CC 0x0414 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0                          0x00CC 0x0414 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0                      0x00D0 0x0418 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B                         0x00D0 0x0418 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0                         0x00D0 0x0418 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0                     0x00D0 0x0418 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20                       0x00D0 0x0418 0x06EC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1                         0x00D0 0x0418 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0                       0x00D0 0x0418 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21                     0x00D0 0x0418 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5                        0x00D0 0x0418 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5                       0x00D0 0x0418 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1                      0x00D4 0x041C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B                         0x00D4 0x041C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1                         0x00D4 0x041C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1                     0x00D4 0x041C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21                       0x00D4 0x041C 0x06F0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2                         0x00D4 0x041C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1                       0x00D4 0x041C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22                     0x00D4 0x041C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6                        0x00D4 0x041C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6                       0x00D4 0x041C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2                      0x00D8 0x0420 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B                         0x00D8 0x0420 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2                         0x00D8 0x0420 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2                     0x00D8 0x0420 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22                       0x00D8 0x0420 0x06F4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3                         0x00D8 0x0420 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2                       0x00D8 0x0420 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23                     0x00D8 0x0420 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7                        0x00D8 0x0420 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7                       0x00D8 0x0420 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3                      0x00DC 0x0424 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24                       0x00DC 0x0424 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3                         0x00DC 0x0424 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3                     0x00DC 0x0424 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23                       0x00DC 0x0424 0x06F8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4                         0x00DC 0x0424 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3                       0x00DC 0x0424 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24                     0x00DC 0x0424 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8                        0x00DC 0x0424 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8                       0x00DC 0x0424 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4                      0x00E0 0x0428 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25                       0x00E0 0x0428 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4                     0x00E0 0x0428 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC                         0x00E0 0x0428 0x0708 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5                         0x00E0 0x0428 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4                       0x00E0 0x0428 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25                     0x00E0 0x0428 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9                        0x00E0 0x0428 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9                       0x00E0 0x0428 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5                      0x00E4 0x042C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26                       0x00E4 0x042C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5                     0x00E4 0x042C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC                         0x00E4 0x042C 0x0700 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6                         0x00E4 0x042C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5                       0x00E4 0x042C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26                     0x00E4 0x042C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10                       0x00E4 0x042C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10                      0x00E4 0x042C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6                      0x00E8 0x0430 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2                        0x00E8 0x0430 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6                     0x00E8 0x0430 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK                        0x00E8 0x0430 0x0704 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7                         0x00E8 0x0430 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6                       0x00E8 0x0430 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27                     0x00E8 0x0430 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11                       0x00E8 0x0430 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11                      0x00E8 0x0430 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7                      0x00EC 0x0434 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3                        0x00EC 0x0434 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7                     0x00EC 0x0434 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK                          0x00EC 0x0434 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8                         0x00EC 0x0434 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7                       0x00EC 0x0434 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28                     0x00EC 0x0434 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12                       0x00EC 0x0434 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12                      0x00EC 0x0434 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8                      0x00F0 0x0438 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8                          0x00F0 0x0438 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8                     0x00F0 0x0438 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9                        0x00F0 0x0438 0x06C4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9                         0x00F0 0x0438 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8                       0x00F0 0x0438 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29                     0x00F0 0x0438 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13                       0x00F0 0x0438 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13                      0x00F0 0x0438 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9                      0x00F4 0x043C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9                          0x00F4 0x043C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9                     0x00F4 0x043C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8                        0x00F4 0x043C 0x06C0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10                        0x00F4 0x043C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9                       0x00F4 0x043C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30                     0x00F4 0x043C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14                       0x00F4 0x043C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14                      0x00F4 0x043C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10                     0x00F8 0x0440 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10                         0x00F8 0x0440 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10                    0x00F8 0x0440 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7                        0x00F8 0x0440 0x06BC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11                        0x00F8 0x0440 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10                      0x00F8 0x0440 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31                     0x00F8 0x0440 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15                       0x00F8 0x0440 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15                      0x00F8 0x0440 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11                     0x00FC 0x0444 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11                         0x00FC 0x0444 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11                    0x00FC 0x0444 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6                        0x00FC 0x0444 0x06B8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12                        0x00FC 0x0444 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11                      0x00FC 0x0444 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0                     0x00FC 0x0444 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16                       0x00FC 0x0444 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16                      0x00FC 0x0444 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12                     0x0100 0x0448 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12                         0x0100 0x0448 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12                    0x0100 0x0448 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5                        0x0100 0x0448 0x06B4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13                        0x0100 0x0448 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12                      0x0100 0x0448 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1                     0x0100 0x0448 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17                       0x0100 0x0448 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17                      0x0100 0x0448 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13                     0x0104 0x044C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13                         0x0104 0x044C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13                    0x0104 0x044C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4                        0x0104 0x044C 0x06B0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14                        0x0104 0x044C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13                      0x0104 0x044C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2                     0x0104 0x044C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18                       0x0104 0x044C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18                      0x0104 0x044C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14                     0x0108 0x0450 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14                         0x0108 0x0450 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14                    0x0108 0x0450 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3                        0x0108 0x0450 0x06AC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15                        0x0108 0x0450 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14                      0x0108 0x0450 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK                    0x0108 0x0450 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19                       0x0108 0x0450 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19                      0x0108 0x0450 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15                     0x010C 0x0454 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15                         0x010C 0x0454 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15                    0x010C 0x0454 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2                        0x010C 0x0454 0x06A8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16                        0x010C 0x0454 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15                      0x010C 0x0454 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0                      0x010C 0x0454 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0                       0x010C 0x0454 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20                      0x010C 0x0454 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16                     0x0110 0x0458 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16                       0x0110 0x0458 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK                       0x0110 0x0458 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK                   0x0110 0x0458 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1                        0x0110 0x0458 0x06A4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17                        0x0110 0x0458 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24                      0x0110 0x0458 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1                      0x0110 0x0458 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1                       0x0110 0x0458 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21                      0x0110 0x0458 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17                     0x0114 0x045C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17                       0x0114 0x045C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL                   0x0114 0x045C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0                        0x0114 0x045C 0x06A0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18                        0x0114 0x045C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25                      0x0114 0x045C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2                      0x0114 0x045C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2                       0x0114 0x045C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22                      0x0114 0x045C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18                     0x0118 0x0460 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18                       0x0118 0x0460 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO                          0x0118 0x0460 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO                      0x0118 0x0460 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15                       0x0118 0x0460 0x06D8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19                        0x0118 0x0460 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26                      0x0118 0x0460 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3                      0x0118 0x0460 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3                       0x0118 0x0460 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23                      0x0118 0x0460 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19                     0x011C 0x0464 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19                       0x011C 0x0464 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO                       0x011C 0x0464 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14                       0x011C 0x0464 0x06D4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20                        0x011C 0x0464 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27                      0x011C 0x0464 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT                    0x011C 0x0464 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4                       0x011C 0x0464 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24                      0x011C 0x0464 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20                     0x0120 0x0468 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20                       0x0120 0x0468 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT                           0x0120 0x0468 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT              0x0120 0x0468 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13                       0x0120 0x0468 0x06D0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21                        0x0120 0x0468 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28                      0x0120 0x0468 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP                        0x0120 0x0468 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5                       0x0120 0x0468 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25                      0x0120 0x0468 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21                     0x0124 0x046C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21                       0x0124 0x046C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT                           0x0124 0x046C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT              0x0124 0x046C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12                       0x0124 0x046C 0x06CC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22                        0x0124 0x046C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29                      0x0124 0x046C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0                      0x0124 0x046C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6                       0x0124 0x046C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26                      0x0124 0x046C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22                     0x0128 0x0470 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22                       0x0128 0x0470 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT                           0x0128 0x0470 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT              0x0128 0x0470 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11                       0x0128 0x0470 0x06C8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23                        0x0128 0x0470 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30                      0x0128 0x0470 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1                      0x0128 0x0470 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7                       0x0128 0x0470 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27                      0x0128 0x0470 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23                     0x012C 0x0474 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23                       0x012C 0x0474 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT                           0x012C 0x0474 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT              0x012C 0x0474 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10                       0x012C 0x0474 0x06FC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24                        0x012C 0x0474 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31                      0x012C 0x0474 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2                      0x012C 0x0474 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8                       0x012C 0x0474 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28                      0x012C 0x0474 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE                      0x0130 0x0478 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E                        0x0130 0x0478 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC                    0x0130 0x0478 0x063C 0x2 0x1
+#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN               0x0130 0x0478 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17                       0x0130 0x0478 0x06E0 0x4 0x0
+#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25                        0x0130 0x0478 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B                        0x0130 0x0478 0x0864 0x6 0x0
+#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17                     0x0130 0x0478 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1                        0x0130 0x0478 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1                       0x0130 0x0478 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC                        0x0134 0x047C 0x07E0 0x0 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS                           0x0134 0x047C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD                     0x0134 0x047C 0x0630 0x2 0x1
+#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN                0x0134 0x047C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18                        0x0134 0x047C 0x06E4 0x4 0x0
+#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26                         0x0134 0x047C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP                           0x0134 0x047C 0x0870 0x6 0x0
+#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18                      0x0134 0x047C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2                         0x0134 0x047C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2                        0x0134 0x047C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET                        0x0138 0x0480 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS                           0x0138 0x0480 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD                     0x0138 0x0480 0x062C 0x2 0x1
+#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI                       0x0138 0x0480 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_RESET__M4_EVENTI                           0x0138 0x0480 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27                         0x0138 0x0480 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY                        0x0138 0x0480 0x069C 0x6 0x0
+#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20                      0x0138 0x0480 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4                         0x0138 0x0480 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4                        0x0138 0x0480 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC                        0x013C 0x0484 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY                         0x013C 0x0484 0x07E0 0x1 0x1
+#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS                    0x013C 0x0484 0x0640 0x2 0x1
+#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN                0x013C 0x0484 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19                        0x013C 0x0484 0x06E8 0x4 0x0
+#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28                         0x013C 0x0484 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B                         0x013C 0x0484 0x086C 0x6 0x0
+#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19                      0x013C 0x0484 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3                         0x013C 0x0484 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3                        0x013C 0x0484 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE                           0x0140 0x0488 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_ALE__I2C3_SDA                              0x0140 0x0488 0x07BC 0x1 0x0
+#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B                         0x0140 0x0488 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0                            0x0140 0x0488 0x072C 0x3 0x0
+#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2                          0x0140 0x0488 0x079C 0x4 0x0
+#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0                            0x0140 0x0488 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B                            0x0140 0x0488 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0                         0x0140 0x0488 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN             0x0140 0x0488 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12                      0x0140 0x0488 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B                       0x0144 0x048C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT                      0x0144 0x048C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2                      0x0144 0x048C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC                     0x0144 0x048C 0x0654 0x3 0x0
+#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK                         0x0144 0x048C 0x078C 0x4 0x0
+#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1                          0x0144 0x048C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B                          0x0144 0x048C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3                       0x0144 0x048C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ          0x0144 0x048C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9                     0x0144 0x048C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B                       0x0148 0x0490 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B                      0x0148 0x0490 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3                      0x0148 0x0490 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD                     0x0148 0x0490 0x0648 0x3 0x0
+#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0                            0x0148 0x0490 0x0790 0x4 0x0
+#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2                          0x0148 0x0490 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE1_B__WEIM_OE                             0x0148 0x0490 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4                       0x0148 0x0490 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE      0x0148 0x0490 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8                     0x0148 0x0490 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE                           0x014C 0x0494 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CLE__I2C3_SCL                              0x014C 0x0494 0x07B8 0x1 0x0
+#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK                          0x014C 0x0494 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK                           0x014C 0x0494 0x0720 0x3 0x0
+#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3                          0x014C 0x0494 0x0798 0x4 0x0
+#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3                            0x014C 0x0494 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CLE__WEIM_BCLK                             0x014C 0x0494 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CLE__TPSMP_CLK                             0x014C 0x0494 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP             0x014C 0x0494 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13                      0x014C 0x0494 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00                     0x0150 0x0498 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4                       0x0150 0x0498 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1                     0x0150 0x0498 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO                        0x0150 0x0498 0x0754 0x3 0x0
+#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK                        0x0150 0x0498 0x0788 0x4 0x0
+#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4                         0x0150 0x0498 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0                          0x0150 0x0498 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7                      0x0150 0x0498 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET  0x0150 0x0498 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5         0x0150 0x0498 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01                     0x0154 0x049C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5                       0x0154 0x049C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0                     0x0154 0x049C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI                        0x0154 0x049C 0x0758 0x3 0x0
+#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS                         0x0154 0x049C 0x0778 0x4 0x0
+#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5                         0x0154 0x049C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1                          0x0154 0x049C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8                      0x0154 0x049C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD      0x0154 0x049C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4         0x0154 0x049C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02                     0x0158 0x04A0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6                       0x0158 0x04A0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK                       0x0158 0x04A0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK                        0x0158 0x04A0 0x0750 0x3 0x0
+#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK                     0x0158 0x04A0 0x0784 0x4 0x0
+#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6                         0x0158 0x04A0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2                          0x0158 0x04A0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9                      0x0158 0x04A0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV   0x0158 0x04A0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3         0x0158 0x04A0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03                     0x015C 0x04A4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7                       0x015C 0x04A4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B                      0x015C 0x04A4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0                         0x015C 0x04A4 0x075C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK                     0x015C 0x04A4 0x0780 0x4 0x0
+#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7                         0x015C 0x04A4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3                          0x015C 0x04A4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10                     0x015C 0x04A4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH     0x015C 0x04A4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6         0x015C 0x04A4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04                     0x0160 0x04A8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4                       0x0160 0x04A8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B                      0x0160 0x04A8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B                        0x0160 0x04A8 0x083C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                   0x0160 0x04A8 0x0650 0x4 0x0
+#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8                         0x0160 0x04A8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4                          0x0160 0x04A8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11                     0x0160 0x04A8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH     0x0160 0x04A8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0            0x0160 0x04A8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
+#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12                     0x0164 0x04AC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET  0x0164 0x04AC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1            0x0164 0x04AC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06                     0x0168 0x04B0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6                       0x0168 0x04B0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B                      0x0168 0x04B0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_RX                           0x0168 0x04B0 0x0840 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_TX                           0x0168 0x04B0 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__PWM3_OUT                           0x0168 0x04B0 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10                        0x0168 0x04B0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6                          0x0168 0x04B0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13                     0x0168 0x04B0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD      0x0168 0x04B0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2            0x0168 0x04B0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07                     0x016C 0x04B4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7                       0x016C 0x04B4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS                        0x016C 0x04B4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_RX                           0x016C 0x04B4 0x0840 0x3 0x1
+#define MX6SX_PAD_NAND_DATA07__UART3_TX                           0x016C 0x04B4 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA07__PWM4_OUT                           0x016C 0x04B4 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11                        0x016C 0x04B4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7                          0x016C 0x04B4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14                     0x016C 0x04B4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD      0x016C 0x04B4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3            0x016C 0x04B4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B                         0x0170 0x04B8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B                       0x0170 0x04B8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3                       0x0170 0x04B8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS                     0x0170 0x04B8 0x0658 0x3 0x0
+#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS                           0x0170 0x04B8 0x077C 0x4 0x0
+#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12                          0x0170 0x04B8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_RE_B__WEIM_RW                              0x0170 0x04B8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5                        0x0170 0x04B8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD        0x0170 0x04B8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7                      0x0170 0x04B8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B                   0x0174 0x04BC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT                    0x0174 0x04BC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1                    0x0174 0x04BC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO                       0x0174 0x04BC 0x0724 0x3 0x0
+#define MX6SX_PAD_NAND_READY_B__ESAI_TX1                          0x0174 0x04BC 0x0794 0x4 0x0
+#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13                       0x0174 0x04BC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1                       0x0174 0x04BC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2                     0x0174 0x04BC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN         0x0174 0x04BC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10                  0x0174 0x04BC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B                         0x0178 0x04C0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT                       0x0178 0x04C0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2                       0x0178 0x04C0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD                      0x0178 0x04C0 0x0644 0x3 0x0
+#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0                         0x0178 0x04C0 0x07A4 0x4 0x0
+#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14                          0x0178 0x04C0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT                            0x0178 0x04C0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6                        0x0178 0x04C0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV     0x0178 0x04C0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6                      0x0178 0x04C0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B                         0x017C 0x04C4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B                       0x017C 0x04C4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0                       0x017C 0x04C4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI                          0x017C 0x04C4 0x0728 0x3 0x0
+#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1                         0x017C 0x04C4 0x07A0 0x4 0x0
+#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15                          0x017C 0x04C4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0                          0x017C 0x04C4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1                        0x017C 0x04C4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE       0x017C 0x04C4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11                     0x017C 0x04C4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0                    0x0180 0x04C8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC                       0x0180 0x04C8 0x085C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI                       0x0180 0x04C8 0x0718 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1                      0x0180 0x04C8 0x07A0 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14                      0x0180 0x04C8 0x06D4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16                       0x0180 0x04C8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6                       0x0180 0x04C8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3                     0x0180 0x04C8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3           0x0180 0x04C8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1                    0x0184 0x04CC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID                    0x0184 0x04CC 0x0624 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO                       0x0184 0x04CC 0x0714 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1                          0x0184 0x04CC 0x0794 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13                      0x0184 0x04CC 0x06D0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17                       0x0184 0x04CC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5                       0x0184 0x04CC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4                     0x0184 0x04CC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0                   0x0184 0x04CC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2                    0x0188 0x04D0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR                      0x0188 0x04D0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1                        0x0188 0x04D0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK                       0x0188 0x04D0 0x078C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12                      0x0188 0x04D0 0x06CC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18                       0x0188 0x04D0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4                       0x0188 0x04D0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6                     0x0188 0x04D0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1                   0x0188 0x04D0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3                    0x018C 0x04D4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC                       0x018C 0x04D4 0x0860 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2                        0x018C 0x04D4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0                          0x018C 0x04D4 0x0790 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11                      0x018C 0x04D4 0x06C8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19                       0x018C 0x04D4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3                       0x018C 0x04D4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7                     0x018C 0x04D4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2                   0x018C 0x04D4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS                         0x0190 0x04D8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX                             0x0190 0x04D8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2                           0x0190 0x04D8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI                         0x0190 0x04D8 0x0758 0x3 0x1
+#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15                        0x0190 0x04D8 0x06D8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20                         0x0190 0x04D8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7                         0x0190 0x04D8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13                      0x0190 0x04D8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4             0x0190 0x04D8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK                       0x0194 0x04DC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID                     0x0194 0x04DC 0x0628 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK                        0x0194 0x04DC 0x0710 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3                       0x0194 0x04DC 0x0798 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1                        0x0194 0x04DC 0x06A4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21                        0x0194 0x04DC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0                        0x0194 0x04DC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0                      0x0194 0x04DC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5                    0x0194 0x04DC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B                     0x0198 0x04E0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR                      0x0198 0x04E0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0                        0x0198 0x04E0 0x071C 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2                      0x0198 0x04E0 0x079C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0                       0x0198 0x04E0 0x06A0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22                       0x0198 0x04E0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1                       0x0198 0x04E0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1                     0x0198 0x04E0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4                   0x0198 0x04E0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B                     0x019C 0x04E4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX                           0x019C 0x04E4 0x068C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1                         0x019C 0x04E4 0x0694 0x2 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO                       0x019C 0x04E4 0x0754 0x3 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10                      0x019C 0x04E4 0x06FC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23                       0x019C 0x04E4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2                       0x019C 0x04E4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24                       0x01A0 0x04E8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14                      0x01A0 0x04E8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                     0x01A0 0x04E8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                    0x01A4 0x04EC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B                       0x01A4 0x04EC 0x083C 0x1 0x5
+#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO                       0x01A4 0x04EC 0x0734 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK                       0x01A4 0x04EC 0x0788 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21                      0x01A4 0x04EC 0x06F0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25                       0x01A4 0x04EC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13                      0x01A4 0x04EC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8                     0x01A4 0x04EC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2                    0x01A8 0x04F0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA                          0x01A8 0x04F0 0x07B4 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY                        0x01A8 0x04F0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0                      0x01A8 0x04F0 0x07A4 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20                      0x01A8 0x04F0 0x06EC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26                       0x01A8 0x04F0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12                      0x01A8 0x04F0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5                     0x01A8 0x04F0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3                    0x01AC 0x04F4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL                          0x01AC 0x04F4 0x07B0 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3                        0x01AC 0x04F4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS                        0x01AC 0x04F4 0x077C 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19                      0x01AC 0x04F4 0x06E8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27                       0x01AC 0x04F4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11                      0x01AC 0x04F4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2                     0x01AC 0x04F4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS                         0x01B0 0x04F8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX                             0x01B0 0x04F8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1                           0x01B0 0x04F8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0                          0x01B0 0x04F8 0x075C 0x3 0x1
+#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23                        0x01B0 0x04F8 0x06F8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28                         0x01B0 0x04F8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15                        0x01B0 0x04F8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX                           0x01B4 0x04FC 0x0840 0x1 0x4
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX                           0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
+#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29                        0x01B4 0x04FC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8                        0x01B4 0x04FC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                     0x01B4 0x04FC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                     0x01B8 0x0500 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX                          0x01B8 0x0500 0x0840 0x1 0x5
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX                          0x01B8 0x0500 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0                        0x01B8 0x0500 0x073C 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                    0x01B8 0x0500 0x0784 0x3 0x3
+#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17                      0x01B8 0x0500 0x06E0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30                       0x01B8 0x0500 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9                       0x01B8 0x0500 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10                    0x01B8 0x0500 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B                     0x01BC 0x0504 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX                           0x01BC 0x0504 0x0690 0x1 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2                         0x01BC 0x0504 0x0698 0x2 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK                       0x01BC 0x0504 0x0750 0x3 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18                      0x01BC 0x0504 0x06E4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31                       0x01BC 0x0504 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10                      0x01BC 0x0504 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14                    0x01BC 0x0504 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0                     0x01C0 0x0508 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0                          0x01C0 0x0508 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10                        0x01C0 0x0508 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0                      0x01C0 0x0508 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER              0x01C0 0x0508 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0                   0x01C0 0x0508 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1                     0x01C4 0x050C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1                          0x01C4 0x050C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11                        0x01C4 0x050C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1                      0x01C4 0x050C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER               0x01C4 0x050C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1                   0x01C4 0x050C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2                     0x01C8 0x0510 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2                          0x01C8 0x0510 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12                        0x01C8 0x0510 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2                      0x01C8 0x0510 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER               0x01C8 0x0510 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2                   0x01C8 0x0510 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3                     0x01CC 0x0514 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3                          0x01CC 0x0514 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13                        0x01CC 0x0514 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3                      0x01CC 0x0514 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER               0x01CC 0x0514 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3                   0x01CC 0x0514 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN                      0x01D0 0x0518 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4                       0x01D0 0x0518 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14                     0x01D0 0x0518 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0                   0x01D0 0x0518 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER            0x01D0 0x0518 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4                0x01D0 0x0518 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK                        0x01D4 0x051C 0x0768 0x0 0x1
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER                         0x01D4 0x051C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5                          0x01D4 0x051C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15                        0x01D4 0x051C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1                      0x01D4 0x051C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER               0x01D4 0x051C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5                   0x01D4 0x051C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0                     0x01D8 0x0520 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC                        0x01D8 0x0520 0x0810 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6                          0x01D8 0x0520 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16                        0x01D8 0x0520 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2                      0x01D8 0x0520 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER               0x01D8 0x0520 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6                   0x01D8 0x0520 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1                     0x01DC 0x0524 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK                        0x01DC 0x0524 0x0808 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7                          0x01DC 0x0524 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17                        0x01DC 0x0524 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3                      0x01DC 0x0524 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER               0x01DC 0x0524 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7                   0x01DC 0x0524 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2                     0x01E0 0x0528 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC                        0x01E0 0x0528 0x0818 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8                          0x01E0 0x0528 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18                        0x01E0 0x0528 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4                      0x01E0 0x0528 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER               0x01E0 0x0528 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8                   0x01E0 0x0528 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3                     0x01E4 0x052C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK                        0x01E4 0x052C 0x0814 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9                          0x01E4 0x052C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19                        0x01E4 0x052C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5                      0x01E4 0x052C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER               0x01E4 0x052C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9                   0x01E4 0x052C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN                      0x01E8 0x0530 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0                   0x01E8 0x0530 0x080C 0x2 0x1
+#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10                      0x01E8 0x0530 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0                      0x01E8 0x0530 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6                   0x01E8 0x0530 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER             0x01E8 0x0530 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10               0x01E8 0x0530 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC                     0x01EC 0x0534 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER                         0x01EC 0x0534 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0                      0x01EC 0x0534 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11                         0x01EC 0x0534 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1                         0x01EC 0x0534 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7                      0x01EC 0x0534 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER                0x01EC 0x0534 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11                  0x01EC 0x0534 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0                     0x01F0 0x0538 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT                            0x01F0 0x0538 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12                         0x01F0 0x0538 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2                         0x01F0 0x0538 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8                      0x01F0 0x0538 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18                       0x01F0 0x0538 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12                  0x01F0 0x0538 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1                     0x01F4 0x053C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT                            0x01F4 0x053C 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13                         0x01F4 0x053C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3                         0x01F4 0x053C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9                      0x01F4 0x053C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19                       0x01F4 0x053C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13                  0x01F4 0x053C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2                     0x01F8 0x0540 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT                            0x01F8 0x0540 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14                         0x01F8 0x0540 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4                         0x01F8 0x0540 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10                     0x01F8 0x0540 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20                       0x01F8 0x0540 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14                  0x01F8 0x0540 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3                     0x01FC 0x0544 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT                            0x01FC 0x0544 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15                         0x01FC 0x0544 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5                         0x01FC 0x0544 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11                     0x01FC 0x0544 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21                       0x01FC 0x0544 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15                  0x01FC 0x0544 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN                      0x0200 0x0548 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16                      0x0200 0x0548 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6                      0x0200 0x0548 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12                  0x0200 0x0548 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22                    0x0200 0x0548 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16               0x0200 0x0548 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK                        0x0204 0x054C 0x0774 0x0 0x1
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER                         0x0204 0x054C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17                         0x0204 0x054C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7                         0x0204 0x054C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13                     0x0204 0x054C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23                       0x0204 0x054C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17                  0x0204 0x054C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0                     0x0208 0x0550 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC                        0x0208 0x0550 0x07FC 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT                            0x0208 0x0550 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18                         0x0208 0x0550 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8                         0x0208 0x0550 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14                     0x0208 0x0550 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24                       0x0208 0x0550 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18                  0x0208 0x0550 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1                     0x020C 0x0554 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK                        0x020C 0x0554 0x07F4 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT                            0x020C 0x0554 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19                         0x020C 0x0554 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9                         0x020C 0x0554 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15                     0x020C 0x0554 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25                       0x020C 0x0554 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19                  0x020C 0x0554 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2                     0x0210 0x0558 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC                        0x0210 0x0558 0x0804 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT                            0x0210 0x0558 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20                         0x0210 0x0558 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC                          0x0210 0x0558 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL                            0x0210 0x0558 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26                       0x0210 0x0558 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20                  0x0210 0x0558 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3                     0x0214 0x055C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK                        0x0214 0x055C 0x0800 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT                            0x0214 0x055C 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21                         0x0214 0x055C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC                          0x0214 0x055C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT                        0x0214 0x055C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27                       0x0214 0x055C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21                  0x0214 0x055C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN                      0x0218 0x0560 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0                   0x0218 0x0560 0x07F8 0x2 0x1
+#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22                      0x0218 0x0560 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD                       0x0218 0x0560 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B                         0x0218 0x0560 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28                    0x0218 0x0560 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22               0x0218 0x0560 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC                     0x021C 0x0564 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER                         0x021C 0x0564 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0                      0x021C 0x0564 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23                         0x021C 0x0564 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK                         0x021C 0x0564 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TXC__SJC_DONE                            0x021C 0x0564 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29                       0x021C 0x0564 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23                  0x021C 0x0564 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CLK__USDHC1_CLK                             0x0220 0x0568 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS                       0x0220 0x0568 0x0668 0x1 0x1
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B                           0x0220 0x0568 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CLK__GPT_CLK                                0x0220 0x0568 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB                   0x0220 0x0568 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0                             0x0220 0x0568 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT                  0x0220 0x0568 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CLK__CCM_OUT1                               0x0220 0x0568 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK                      0x0220 0x0568 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45                          0x0220 0x0568 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CMD__USDHC1_CMD                             0x0224 0x056C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC                        0x0224 0x056C 0x0664 0x1 0x1
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B                           0x0224 0x056C 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1                           0x0224 0x056C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB                   0x0224 0x056C 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1                             0x0224 0x056C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN                   0x0224 0x056C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CMD__CCM_CLKO1                              0x0224 0x056C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK                        0x0224 0x056C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46                          0x0224 0x056C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0                         0x0228 0x0570 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                      0x0228 0x0570 0x065C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS             0x0228 0x0570 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1                         0x0228 0x0570 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA0__UART2_RX                             0x0228 0x0570 0x0838 0x4 0x2
+#define MX6SX_PAD_SD1_DATA0__UART2_TX                             0x0228 0x0570 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2                           0x0228 0x0570 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                 0x0228 0x0570 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA0__CCM_OUT2                             0x0228 0x0570 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP                        0x0228 0x0570 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48                        0x0228 0x0570 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1                         0x022C 0x0574 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                      0x022C 0x0574 0x066C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA1__PWM4_OUT                             0x022C 0x0574 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2                         0x022C 0x0574 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_RX                             0x022C 0x0574 0x0838 0x4 0x3
+#define MX6SX_PAD_SD1_DATA1__UART2_TX                             0x022C 0x0574 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3                           0x022C 0x0574 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT                0x022C 0x0574 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2                            0x022C 0x0574 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN                      0x022C 0x0574 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47                        0x022C 0x0574 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2                         0x0230 0x0578 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
+#define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N                        0x0230 0x0578 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3                         0x0234 0x057C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                      0x0234 0x057C 0x0660 0x1 0x1
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                      0x0234 0x057C 0x065C 0x2 0x2
+#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3                         0x0234 0x057C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B                          0x0234 0x057C 0x0834 0x4 0x3
+#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5                           0x0234 0x057C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1                           0x0234 0x057C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY                         0x0234 0x057C 0x069C 0x7 0x2
+#define MX6SX_PAD_SD1_DATA3__VADC_RST_N                           0x0234 0x057C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__USDHC2_CLK                             0x0238 0x0580 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS                       0x0238 0x0580 0x0680 0x1 0x2
+#define MX6SX_PAD_SD2_CLK__KPP_COL_5                              0x0238 0x0580 0x07C8 0x2 0x1
+#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK                            0x0238 0x0580 0x0740 0x3 0x1
+#define MX6SX_PAD_SD2_CLK__MLB_SIG                                0x0238 0x0580 0x07F0 0x4 0x2
+#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6                             0x0238 0x0580 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CLK__MQS_RIGHT                              0x0238 0x0580 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY                         0x0238 0x0580 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5                   0x0238 0x0580 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29                          0x0238 0x0580 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_CMD__USDHC2_CMD                             0x023C 0x0584 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC                        0x023C 0x0584 0x067C 0x1 0x2
+#define MX6SX_PAD_SD2_CMD__KPP_ROW_5                              0x023C 0x0584 0x07D4 0x2 0x1
+#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI                            0x023C 0x0584 0x0748 0x3 0x1
+#define MX6SX_PAD_SD2_CMD__MLB_CLK                                0x023C 0x0584 0x07E8 0x4 0x2
+#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7                             0x023C 0x0584 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CMD__MQS_LEFT                               0x023C 0x0584 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B                           0x023C 0x0584 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4                   0x023C 0x0584 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30                          0x023C 0x0584 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0                         0x0240 0x0588 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD                      0x0240 0x0588 0x0674 0x1 0x2
+#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7                            0x0240 0x0588 0x07DC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA0__PWM1_OUT                             0x0240 0x0588 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA0__I2C4_SDA                             0x0240 0x0588 0x07C4 0x4 0x3
+#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8                           0x0240 0x0588 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3                           0x0240 0x0588 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA0__UART4_RX                             0x0240 0x0588 0x0848 0x7 0x4
+#define MX6SX_PAD_SD2_DATA0__UART4_TX                             0x0240 0x0588 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                 0x0240 0x0588 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50                        0x0240 0x0588 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1                         0x0244 0x058C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC                      0x0244 0x058C 0x0684 0x1 0x2
+#define MX6SX_PAD_SD2_DATA1__KPP_COL_7                            0x0244 0x058C 0x07D0 0x2 0x1
+#define MX6SX_PAD_SD2_DATA1__PWM2_OUT                             0x0244 0x058C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA1__I2C4_SCL                             0x0244 0x058C 0x07C0 0x4 0x3
+#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9                           0x0244 0x058C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2                           0x0244 0x058C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_RX                             0x0244 0x058C 0x0848 0x7 0x5
+#define MX6SX_PAD_SD2_DATA1__UART4_TX                             0x0244 0x058C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                 0x0244 0x058C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49                        0x0244 0x058C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2                         0x0248 0x0590 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS                     0x0248 0x0590 0x0688 0x1 0x2
+#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6                            0x0248 0x0590 0x07D8 0x2 0x1
+#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0                           0x0248 0x0590 0x074C 0x3 0x1
+#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                     0x0248 0x0590 0x081C 0x4 0x2
+#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10                          0x0248 0x0590 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT                            0x0248 0x0590 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA2__UART6_RX                             0x0248 0x0590 0x0858 0x7 0x4
+#define MX6SX_PAD_SD2_DATA2__UART6_TX                             0x0248 0x0590 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                 0x0248 0x0590 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32                        0x0248 0x0590 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3                         0x024C 0x0594 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD                      0x024C 0x0594 0x0678 0x1 0x2
+#define MX6SX_PAD_SD2_DATA3__KPP_COL_6                            0x024C 0x0594 0x07CC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO                          0x024C 0x0594 0x0744 0x3 0x1
+#define MX6SX_PAD_SD2_DATA3__MLB_DATA                             0x024C 0x0594 0x07EC 0x4 0x2
+#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11                          0x024C 0x0594 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA3__SPDIF_IN                             0x024C 0x0594 0x0824 0x6 0x4
+#define MX6SX_PAD_SD2_DATA3__UART6_RX                             0x024C 0x0594 0x0858 0x7 0x5
+#define MX6SX_PAD_SD2_DATA3__UART6_TX                             0x024C 0x0594 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
+#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0                             0x0250 0x0598 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY                            0x0250 0x0598 0x07E4 0x6 0x0
+#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29                         0x0250 0x0598 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5             0x0250 0x0598 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CMD__USDHC3_CMD                             0x0254 0x059C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_RX                               0x0254 0x059C 0x0848 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_TX                               0x0254 0x059C 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI                            0x0254 0x059C 0x0748 0x2 0x0
+#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC                        0x0254 0x059C 0x067C 0x3 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC                           0x0254 0x059C 0x07E4 0x4 0x1
+#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1                             0x0254 0x059C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_RS                              0x0254 0x059C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28                         0x0254 0x059C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4             0x0254 0x059C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0                         0x0258 0x05A0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA0__I2C4_SCL                             0x0258 0x05A0 0x07C0 0x1 0x0
+#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1                           0x0258 0x05A0 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD                      0x0258 0x05A0 0x0674 0x3 0x0
+#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1                        0x0258 0x05A0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2                           0x0258 0x05A0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT                            0x0258 0x05A0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30                       0x0258 0x05A0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0                          0x0258 0x05A0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0           0x0258 0x05A0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1                         0x025C 0x05A4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA1__I2C4_SDA                             0x025C 0x05A4 0x07C4 0x1 0x0
+#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2                           0x025C 0x05A4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC                      0x025C 0x05A4 0x0684 0x3 0x0
+#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0                        0x025C 0x05A4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3                           0x025C 0x05A4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT                            0x025C 0x05A4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31                       0x025C 0x05A4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1                          0x025C 0x05A4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1           0x025C 0x05A4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2                         0x0260 0x05A8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B                          0x0260 0x05A8 0x0844 0x1 0x1
+#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0                           0x0260 0x05A8 0x074C 0x2 0x0
+#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                     0x0260 0x05A8 0x0688 0x3 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK                           0x0260 0x05A8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4                           0x0260 0x05A8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN                        0x0260 0x05A8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26                       0x0260 0x05A8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2                          0x0260 0x05A8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2           0x0260 0x05A8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3                         0x0264 0x05AC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA3__UART4_RX                             0x0264 0x05AC 0x0848 0x1 0x1
+#define MX6SX_PAD_SD3_DATA3__UART4_TX                             0x0264 0x05AC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO                          0x0264 0x05AC 0x0744 0x2 0x0
+#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                      0x0264 0x05AC 0x0678 0x3 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE                        0x0264 0x05AC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5                           0x0264 0x05AC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E                          0x0264 0x05AC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27                       0x0264 0x05AC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3                          0x0264 0x05AC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3           0x0264 0x05AC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4                         0x0268 0x05B0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA4__CAN2_RX                              0x0268 0x05B0 0x0690 0x1 0x0
+#define MX6SX_PAD_SD3_DATA4__CANFD_RX2                            0x0268 0x05B0 0x0698 0x2 0x0
+#define MX6SX_PAD_SD3_DATA4__UART3_RX                             0x0268 0x05B0 0x0840 0x3 0x2
+#define MX6SX_PAD_SD3_DATA4__UART3_TX                             0x0268 0x05B0 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3                        0x0268 0x05B0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6                           0x0268 0x05B0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                 0x0268 0x05B0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1                       0x0268 0x05B0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4                          0x0268 0x05B0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0              0x0268 0x05B0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5                         0x026C 0x05B4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA5__CAN1_TX                              0x026C 0x05B4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA5__CANFD_TX1                            0x026C 0x05B4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_RX                             0x026C 0x05B4 0x0840 0x3 0x3
+#define MX6SX_PAD_SD3_DATA5__UART3_TX                             0x026C 0x05B4 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2                        0x026C 0x05B4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7                           0x026C 0x05B4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT                0x026C 0x05B4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE                         0x026C 0x05B4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5                          0x026C 0x05B4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1              0x026C 0x05B4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6                         0x0270 0x05B8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA6__CAN2_TX                              0x0270 0x05B8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA6__CANFD_TX2                            0x0270 0x05B8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B                          0x0270 0x05B8 0x083C 0x3 0x2
+#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4                        0x0270 0x05B8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8                           0x0270 0x05B8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT                0x0270 0x05B8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0                       0x0270 0x05B8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7                          0x0270 0x05B8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7           0x0270 0x05B8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
+#define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR                      0x0274 0x05BC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6                          0x0274 0x05BC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2           0x0274 0x05BC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CLK__USDHC4_CLK                             0x0278 0x05C0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15                         0x0278 0x05C0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO                            0x0278 0x05C0 0x0724 0x2 0x1
+#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS                       0x0278 0x05C0 0x0638 0x3 0x0
+#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13                         0x0278 0x05C0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12                            0x0278 0x05C0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2                             0x0278 0x05C0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20                         0x0278 0x05C0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12                          0x0278 0x05C0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL           0x0278 0x05C0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CMD__USDHC4_CMD                             0x027C 0x05C4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14                         0x027C 0x05C4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI                            0x027C 0x05C4 0x0728 0x2 0x1
+#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC                        0x027C 0x05C4 0x0634 0x3 0x0
+#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14                         0x027C 0x05C4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13                            0x027C 0x05C4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1                             0x027C 0x05C4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19                         0x027C 0x05C4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11                          0x027C 0x05C4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN                    0x027C 0x05C4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0                         0x0280 0x05C8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10                       0x0280 0x05C8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0                           0x0280 0x05C8 0x072C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD                      0x0280 0x05C8 0x062C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12                       0x0280 0x05C8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14                          0x0280 0x05C8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3                           0x0280 0x05C8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21                       0x0280 0x05C8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13                        0x0280 0x05C8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE                      0x0280 0x05C8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1                         0x0284 0x05CC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11                       0x0284 0x05CC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK                          0x0284 0x05CC 0x0720 0x2 0x1
+#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC                      0x0284 0x05CC 0x063C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11                       0x0284 0x05CC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15                          0x0284 0x05CC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY                           0x0284 0x05CC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22                       0x0284 0x05CC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14                        0x0284 0x05CC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR                 0x0284 0x05CC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2                         0x0288 0x05D0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12                       0x0288 0x05D0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA2__I2C2_SDA                             0x0288 0x05D0 0x07B4 0x2 0x0
+#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS                     0x0288 0x05D0 0x0640 0x3 0x0
+#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10                       0x0288 0x05D0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16                          0x0288 0x05D0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3                           0x0288 0x05D0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23                       0x0288 0x05D0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15                        0x0288 0x05D0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB                   0x0288 0x05D0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3                         0x028C 0x05D4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13                       0x028C 0x05D4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA3__I2C2_SCL                             0x028C 0x05D4 0x07B0 0x2 0x0
+#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD                      0x028C 0x05D4 0x0630 0x3 0x0
+#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9                        0x028C 0x05D4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17                          0x028C 0x05D4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY                           0x028C 0x05D4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24                       0x028C 0x05D4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16                        0x028C 0x05D4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS             0x028C 0x05D4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4                         0x0290 0x05D8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09                       0x0290 0x05D8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_RX                             0x0290 0x05D8 0x0850 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_TX                             0x0290 0x05D8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK                          0x0290 0x05D8 0x0730 0x3 0x0
+#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8                        0x0290 0x05D8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18                          0x0290 0x05D8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT                            0x0290 0x05D8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16                       0x0290 0x05D8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE                    0x0290 0x05D8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE            0x0290 0x05D8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5                         0x0294 0x05DC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B                        0x0294 0x05DC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_RX                             0x0294 0x05DC 0x0850 0x2 0x1
+#define MX6SX_PAD_SD4_DATA5__UART5_TX                             0x0294 0x05DC 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI                          0x0294 0x05DC 0x0738 0x3 0x0
+#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7                        0x0294 0x05DC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19                          0x0294 0x05DC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA5__SPDIF_IN                             0x0294 0x05DC 0x0824 0x6 0x0
+#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17                       0x0294 0x05DC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9                         0x0294 0x05DC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0           0x0294 0x05DC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6                         0x0298 0x05E0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B                        0x0298 0x05E0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B                          0x0298 0x05E0 0x084C 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO                          0x0298 0x05E0 0x0734 0x3 0x0
+#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6                        0x0298 0x05E0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20                          0x0298 0x05E0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_WP                            0x0298 0x05E0 0x0878 0x6 0x0
+#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18                       0x0298 0x05E0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10                        0x0298 0x05E0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B                          0x029C 0x05E4 0x0874 0x6 0x0
+#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15                       0x029C 0x05E4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE                     0x029C 0x05E4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD                     0x029C 0x05E4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B                     0x02A0 0x05E8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS                        0x02A0 0x05E8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET                       0x02A0 0x05E8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK                        0x02A0 0x05E8 0x0000 0x3 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET                       0x02A0 0x05E8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22                        0x02A0 0x05E8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS                          0x02A0 0x05E8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25                     0x02A0 0x05E8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17                      0x02A0 0x05E8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2            0x02A0 0x05E8 0x0000 0x9 0x0
+#define MX6SX_PAD_USB_H_DATA__USB_H_DATA                          0x02A4 0x05EC 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_DATA__PWM2_OUT                            0x02A4 0x05EC 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT                      0x02A4 0x05EC 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_DATA__I2C4_SDA                            0x02A4 0x05EC 0x07C4 0x3 0x1
+#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B                        0x02A4 0x05EC 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10                         0x02A4 0x05EC 0x0000 0x5 0x0
+#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE                      0x02A8 0x05F0 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT                          0x02A8 0x05F0 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT                    0x02A8 0x05F0 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL                          0x02A8 0x05F0 0x07C0 0x3 0x1
+#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB              0x02A8 0x05F0 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11                       0x02A8 0x05F0 0x0000 0x5 0x0
+
+#endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/src/arm/imx6sx-sdb.dts b/src/arm/imx6sx-sdb.dts
new file mode 100644
index 000000000000..a3980d970590
--- /dev/null
+++ b/src/arm/imx6sx-sdb.dts
@@ -0,0 +1,479 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX SDB Board";
+	compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc_sd3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_vcc_sd3>;
+			regulator-name = "VCC_SD3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg1>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_otg2>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_psu_5v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "PSU-5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c1 {
+        clock-frequency = <100000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c1>;
+        status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c4 {
+        clock-frequency = <100000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c4>;
+        status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SX_CLK_AUDIO>;
+		DCVDD-supply = <&vgen4_reg>;
+		DBVDD-supply = <&vgen4_reg>;
+		AVDD-supply = <&vgen4_reg>;
+		CPVDD-supply = <&vgen4_reg>;
+		MICVDD-supply = <&vgen3_reg>;
+		PLLVDD-supply = <&vgen4_reg>;
+		SPKVDD1-supply = <&reg_psu_5v>;
+		SPKVDD2-supply = <&reg_psu_5v>;
+	};
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6x-sdb {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC	0x130b0
+				MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS	0x130b0
+				MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD	0x120b0
+				MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD	0x130b0
+				MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK	0x130b0
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1
+				MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1
+				MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC	0xa0b1
+				MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK	0x3081
+				MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+				MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1
+				MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
+				MX6SX_PAD_CSI_DATA06__I2C4_SCL		0x4001b8b1
+			>;
+		};
+
+		pinctrl_vcc_sd3: vccsd3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW3__UART5_RX		0x1b0b1
+				MX6SX_PAD_KEY_COL3__UART5_TX		0x1b0b1
+				MX6SX_PAD_KEY_ROW2__UART5_CTS_B		0x1b0b1
+				MX6SX_PAD_KEY_COL2__UART5_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usb_otg1: usbotg1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usb_otg2: usbot2ggrp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12	0x10b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059
+				MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059
+				MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059
+				MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059
+				MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059
+				MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx6sx.dtsi b/src/arm/imx6sx.dtsi
new file mode 100644
index 000000000000..f4b9da65bc0f
--- /dev/null
+++ b/src/arm/imx6sx.dtsi
@@ -0,0 +1,1208 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6sx-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sx-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		can0 = &flexcan1;
+		can1 = &flexcan2;
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mmc3 = &usdhc4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		spi4 = &ecspi5;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1075000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC uV */
+				996000      1175000
+				792000      1175000
+				396000      1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6SX_CLK_ARM>,
+				 <&clks IMX6SX_CLK_PLL2_PFD2>,
+				 <&clks IMX6SX_CLK_STEP>,
+				 <&clks IMX6SX_CLK_PLL1_SW>,
+				 <&clks IMX6SX_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "ckil";
+		};
+
+		osc: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc";
+		};
+
+		ipp_di0: clock@2 {
+			compatible = "fixed-clock";
+			reg = <2>;
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "ipp_di0";
+		};
+
+		ipp_di1: clock@3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "ipp_di1";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			clocks = <&clks IMX6SX_CLK_OCRAM>;
+		};
+
+		L2: l2-cache@00a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		dma_apbh: dma-apbh@01804000 {
+			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
+		};
+
+		gpmi: gpmi-nand@01806000{
+			compatible = "fsl,imx6sx-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6SX_CLK_GPMI_IO>,
+				 <&clks IMX6SX_CLK_GPMI_APB>,
+				 <&clks IMX6SX_CLK_GPMI_BCH>,
+				 <&clks IMX6SX_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6SX_CLK_PER1_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		aips1: aips-bus@02000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@02004000 {
+					compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+					       <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SX_CLK_SPDIF>,
+						 <&clks IMX6SX_CLK_OSC>,
+						 <&clks IMX6SX_CLK_SPDIF>,
+						 <&clks 0>, <&clks 0>, <&clks 0>,
+						 <&clks IMX6SX_CLK_IPG>,
+						 <&clks 0>, <&clks 0>,
+						 <&clks IMX6SX_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "dma";
+					status = "disabled";
+				};
+
+				ecspi1: ecspi@02008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI1>,
+						 <&clks IMX6SX_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI2>,
+						 <&clks IMX6SX_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI3>,
+						 <&clks IMX6SX_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ECSPI4>,
+						 <&clks IMX6SX_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_UART_IPG>,
+						 <&clks IMX6SX_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				esai: esai@02024000 {
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
+						 <&clks IMX6SX_CLK_ESAI_MEM>,
+						 <&clks IMX6SX_CLK_ESAI_EXTAL>,
+						 <&clks IMX6SX_CLK_ESAI_IPG>,
+						 <&clks IMX6SX_CLK_SPBA>;
+					clock-names = "core", "mem", "extal",
+						      "fsys", "dma";
+					status = "disabled";
+				};
+
+				ssi1: ssi@02028000 {
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
+						 <&clks IMX6SX_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@0202c000 {
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
+						 <&clks IMX6SX_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@02030000 {
+					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
+						 <&clks IMX6SX_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				asrc: asrc@02034000 {
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
+						 <&clks IMX6SX_CLK_ASRC_IPG>,
+						 <&clks IMX6SX_CLK_SPDIF>,
+						 <&clks IMX6SX_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck", "dma";
+					dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
+					       <&sdma 19 20 1>, <&sdma 20 20 1>,
+					       <&sdma 21 20 1>, <&sdma 22 20 1>;
+					dma-names = "rxa", "rxb", "rxc",
+						    "txa", "txb", "txc";
+					status = "okay";
+				};
+			};
+
+			pwm1: pwm@02080000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM1>,
+					 <&clks IMX6SX_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm2: pwm@02084000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM2>,
+					 <&clks IMX6SX_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm3: pwm@02088000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM3>,
+					 <&clks IMX6SX_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm4: pwm@0208c000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM4>,
+					 <&clks IMX6SX_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			flexcan1: can@02090000 {
+				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
+					 <&clks IMX6SX_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			flexcan2: can@02094000 {
+				compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
+					 <&clks IMX6SX_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt: gpt@02098000 {
+				compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_GPT_BUS>,
+					 <&clks IMX6SX_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@020b0000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@020b4000 {
+				compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_DUMMY>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6sx-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				regulator-1p1@110 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1375000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+				};
+
+				regulator-3p0@120 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+				};
+
+				regulator-2p5@130 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2875000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2875000>;
+				};
+
+				reg_arm: regulator-vddcore@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pcie: regulator-vddpcie@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpcie";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc@140 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			tempmon: tempmon {
+				compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,tempmon = <&anatop>;
+				fsl,tempmon-data = <&ocotp>;
+				clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x020cc000 0x4000>;
+
+				snvs-rtc-lp@34 {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					reg = <0x34 0x58>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			epit1: epit@020d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@020d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6sx-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6sx-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@020e4000 {
+				compatible = "fsl,imx6sx-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_SDMA>,
+					 <&clks IMX6SX_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				/* imx6sx reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@02184000 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@02184200 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				status = "disabled";
+			};
+
+			usbh: usb@02184400 {
+				compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+				fsl,usbmisc = <&usbmisc 2>;
+				phy_type = "hsic";
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6SX_CLK_USBOH3>;
+			};
+
+			fec1: ethernet@02188000 {
+				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ENET>,
+					 <&clks IMX6SX_CLK_ENET_AHB>,
+					 <&clks IMX6SX_CLK_ENET_PTP>,
+					 <&clks IMX6SX_CLK_ENET_REF>,
+					 <&clks IMX6SX_CLK_ENET_PTP>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				status = "disabled";
+                        };
+
+			mlb: mlb@0218c000 {
+				reg = <0x0218c000 0x4000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_MLB>;
+				status = "disabled";
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC1>,
+					 <&clks IMX6SX_CLK_USDHC1>,
+					 <&clks IMX6SX_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC2>,
+					 <&clks IMX6SX_CLK_USDHC2>,
+					 <&clks IMX6SX_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@02198000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC3>,
+					 <&clks IMX6SX_CLK_USDHC3>,
+					 <&clks IMX6SX_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: usdhc@0219c000 {
+				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_USDHC4>,
+					 <&clks IMX6SX_CLK_USDHC4>,
+					 <&clks IMX6SX_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: mmdc@021b0000 {
+				compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			fec2: ethernet@021b4000 {
+				compatible = "fsl,imx6sx-fec";
+				reg = <0x021b4000 0x4000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ENET>,
+					 <&clks IMX6SX_CLK_ENET_AHB>,
+					 <&clks IMX6SX_CLK_ENET_PTP>,
+					 <&clks IMX6SX_CLK_ENET2_REF_125M>,
+					 <&clks IMX6SX_CLK_ENET_PTP>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				status = "disabled";
+			};
+
+			weim: weim@021b8000 {
+				compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
+				reg = <0x021b8000 0x4000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
+			};
+
+			ocotp: ocotp@021bc000 {
+				compatible = "fsl,imx6sx-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SX_CLK_OCOTP>;
+			};
+
+			sai1: sai@021d4000 {
+				compatible = "fsl,imx6sx-sai";
+				reg = <0x021d4000 0x4000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
+					 <&clks IMX6SX_CLK_SAI1>,
+					 <&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 31 23 0>, <&sdma 32 23 0>;
+				dma-source = <&gpr 0 15 0 16>;
+				status = "disabled";
+			};
+
+			audmux: audmux@021d8000 {
+				compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			sai2: sai@021dc000 {
+				compatible = "fsl,imx6sx-sai";
+				reg = <0x021dc000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
+					 <&clks IMX6SX_CLK_SAI2>,
+					 <&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 33 23 0>, <&sdma 34 23 0>;
+				dma-source = <&gpr 0 17 0 18>;
+				status = "disabled";
+			};
+
+			qspi1: qspi@021e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_QSPI1>,
+					 <&clks IMX6SX_CLK_QSPI1>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			qspi2: qspi@021e4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-qspi";
+				reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_QSPI2>,
+					 <&clks IMX6SX_CLK_QSPI2>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			uart2: serial@021e8000 {
+				compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@021ec000 {
+				compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart4: serial@021f0000 {
+				compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart5: serial@021f4000 {
+				compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@021f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_I2C4>;
+				status = "disabled";
+			};
+		};
+
+		aips3: aips-bus@02200000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02200000 0x100000>;
+			ranges;
+
+			spba-bus@02200000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02240000 0x40000>;
+				ranges;
+
+				csi1: csi@02214000 {
+					reg = <0x02214000 0x4000>;
+					interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+						 <&clks IMX6SX_CLK_CSI>,
+						 <&clks IMX6SX_CLK_DCIC1>;
+					clock-names = "disp-axi", "csi_mclk", "dcic";
+					status = "disabled";
+				};
+
+				pxp: pxp@02218000 {
+					reg = <0x02218000 0x4000>;
+					interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_PXP_AXI>,
+						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+					clock-names = "pxp-axi", "disp-axi";
+					status = "disabled";
+				};
+
+				csi2: csi@0221c000 {
+					reg = <0x0221c000 0x4000>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
+						 <&clks IMX6SX_CLK_CSI>,
+						 <&clks IMX6SX_CLK_DCIC2>;
+					clock-names = "disp-axi", "csi_mclk", "dcic";
+					status = "disabled";
+				};
+
+				lcdif1: lcdif@02220000 {
+					reg = <0x02220000 0x4000>;
+					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+						 <&clks IMX6SX_CLK_LCDIF_APB>,
+						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+					clock-names = "pix", "axi", "disp_axi";
+					status = "disabled";
+				};
+
+				lcdif2: lcdif@02224000 {
+					reg = <0x02224000 0x4000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
+						 <&clks IMX6SX_CLK_LCDIF_APB>,
+						 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+					clock-names = "pix", "axi", "disp_axi";
+					status = "disabled";
+				};
+
+				vadc: vadc@02228000 {
+					reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
+					reg-names = "vadc-vafe", "vadc-vdec";
+					clocks = <&clks IMX6SX_CLK_VADC>,
+						 <&clks IMX6SX_CLK_CSI>;
+					clock-names = "vadc", "csi";
+					status = "disabled";
+				};
+			};
+
+			adc1: adc@02280000 {
+				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+				reg = <0x02280000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "adc";
+				status = "disabled";
+                        };
+
+			adc2: adc@02284000 {
+				compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
+				reg = <0x02284000 0x4000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_IPG>;
+				clock-names = "adc";
+				status = "disabled";
+                        };
+
+			wdog3: wdog@02288000 {
+				compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
+				reg = <0x02288000 0x4000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			ecspi5: ecspi@0228c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
+				reg = <0x0228c000 0x4000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_ECSPI5>,
+					 <&clks IMX6SX_CLK_ECSPI5>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@022a0000 {
+				compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
+				reg = <0x022a0000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_UART_IPG>,
+					 <&clks IMX6SX_CLK_UART_SERIAL>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			pwm5: pwm@022a4000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022a4000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM5>,
+					 <&clks IMX6SX_CLK_PWM5>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm6: pwm@022a8000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022a8000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM6>,
+					 <&clks IMX6SX_CLK_PWM6>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm7: pwm@022ac000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x022ac000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM7>,
+					 <&clks IMX6SX_CLK_PWM7>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm8: pwm@0022b0000 {
+				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
+				reg = <0x0022b0000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SX_CLK_PWM8>,
+					 <&clks IMX6SX_CLK_PWM8>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+		};
+
+		pcie: pcie@0x08000000 {
+			compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+			reg = <0x08ffc000 0x4000>; /* DBI */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+				  /* configuration space */
+			ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
+				  /* downstream I/O */
+				  0x81000000 0 0          0x08f80000 0 0x00010000
+				  /* non-prefetchable memory */
+				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
+				 <&clks IMX6SX_CLK_PCIE_AXI>,
+				 <&clks IMX6SX_CLK_LVDS1_OUT>,
+				 <&clks IMX6SX_CLK_DISPLAY_AXI>;
+			clock-names = "pcie_ref_125m", "pcie_axi",
+				      "lvds_gate", "display_axi";
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/k2e-clocks.dtsi b/src/arm/k2e-clocks.dtsi
new file mode 100644
index 000000000000..598afe91c676
--- /dev/null
+++ b/src/arm/k2e-clocks.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3a>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	clkusb1: clkusb1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clkpcie1: clkpcie1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x0235006c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+};
diff --git a/src/arm/k2e-evm.dts b/src/arm/k2e-evm.dts
new file mode 100644
index 000000000000..c568f067604d
--- /dev/null
+++ b/src/arm/k2e-evm.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "k2e.dtsi"
+
+/ {
+	compatible =  "ti,k2e-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Edison EVM";
+
+	soc {
+
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-sys";
+			};
+
+			refclkpass: refclkpass {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-pass";
+			};
+
+			refclkddr3a: refclkddr3a {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3a";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x1FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
diff --git a/src/arm/k2e.dtsi b/src/arm/k2e.dtsi
new file mode 100644
index 000000000000..03d01909525b
--- /dev/null
+++ b/src/arm/k2e.dtsi
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison soc device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	soc {
+		/include/ "k2e-clocks.dtsi"
+
+		usb: usb@2680000 {
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			dwc3@2690000 {
+				interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		usb1_phy: usb_phy@2620750 {
+			compatible = "ti,keystone-usbphy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2620750 24>;
+			status = "disabled";
+		};
+
+		usb1: usb@25000000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x25000000 0x10000>;
+			clocks = <&clkusb1>;
+			clock-names = "usb";
+			interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			status = "disabled";
+
+			dwc3@25010000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x25010000 0x70000>;
+				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+				usb-phy = <&usb1_phy>, <&usb1_phy>;
+			};
+		};
+	};
+};
diff --git a/src/arm/k2hk-clocks.dtsi b/src/arm/k2hk-clocks.dtsi
new file mode 100644
index 000000000000..d5adee3c0067
--- /dev/null
+++ b/src/arm/k2hk-clocks.dtsi
@@ -0,0 +1,426 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking SoC clock nodes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkarm>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3a>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	ddr3bpllclk: ddr3bpllclk@2620368 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3b>;
+		clock-output-names = "ddr-3b-pll-clk";
+		reg = <0x02620368 4>;
+		reg-names = "control";
+	};
+
+	clktsip: clktsip {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "tsip";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clksrio: clksrio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso13>;
+		clock-output-names = "srio";
+		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clkgem4: clkgem4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem4";
+		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <12>;
+	};
+
+	clkgem5: clkgem5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem5";
+		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <13>;
+	};
+
+	clkgem6: clkgem6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem6";
+		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <14>;
+	};
+
+	clkgem7: clkgem7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem7";
+		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <15>;
+	};
+
+	clkddr31: clkddr31 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "ddr3-1";
+		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac01: clkrac01 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-01";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac23: clkrac23 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-23";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x02350074 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc2: clkfftc2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-2";
+		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc3: clkfftc3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-3";
+		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc4: clkfftc4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-4";
+		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc5: clkfftc5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-5";
+		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkaif: clkaif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "aif";
+		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d2: clktcp3d2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-2";
+		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clktcp3d3: clktcp3d3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-3";
+		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp4: clkvcp4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-4";
+		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp5: clkvcp5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-5";
+		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp6: clkvcp6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-6";
+		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp7: clkvcp7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-7";
+		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdxb: clkdxb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dxb";
+		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkhyperlink1: clkhyperlink1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-1";
+		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+};
diff --git a/src/arm/k2hk.dtsi b/src/arm/k2hk.dtsi
new file mode 100644
index 000000000000..c73899c73118
--- /dev/null
+++ b/src/arm/k2hk.dtsi
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking soc specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	soc {
+		/include/ "k2hk-clocks.dtsi"
+	};
+};
diff --git a/src/arm/k2l-clocks.dtsi b/src/arm/k2l-clocks.dtsi
new file mode 100644
index 000000000000..eb1e3e29f073
--- /dev/null
+++ b/src/arm/k2l-clocks.dtsi
@@ -0,0 +1,267 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 lamarr SoC clock nodes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	clkdfeiqnsys: clkdfeiqnsys {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "dfe";
+		reg-names = "control", "domain";
+		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+		domain-id = <0>;
+	};
+
+	clkpcie1: clkpcie1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac: clkrac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkdfepd0: clkdfepd0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dfe-pd0";
+		reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkosr: clkosr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "osr";
+		reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350094 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdfepd1: clkdfepd1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dfe-pd1";
+		reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkiqnail: clkiqnail {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "iqn-ail";
+		reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+
+	clkuart2: clkuart2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart3: clkuart3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+};
diff --git a/src/arm/k2l-evm.dts b/src/arm/k2l-evm.dts
new file mode 100644
index 000000000000..fec43128a2e0
--- /dev/null
+++ b/src/arm/k2l-evm.dts
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "k2l.dtsi"
+
+/ {
+	compatible =  "ti,k2l-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Lamarr EVM";
+
+	soc {
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-sys";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x7FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
diff --git a/src/arm/k2l.dtsi b/src/arm/k2l.dtsi
new file mode 100644
index 000000000000..1f7f479589e1
--- /dev/null
+++ b/src/arm/k2l.dtsi
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	soc {
+
+		/include/ "k2l-clocks.dtsi"
+
+		uart2: serial@02348400 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348400 0x100>;
+			clocks	= <&clkuart2>;
+			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		uart3:	serial@02348800 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348800 0x100>;
+			clocks	= <&clkuart3>;
+			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+};
diff --git a/src/arm/kirkwood-b3.dts b/src/arm/kirkwood-b3.dts
new file mode 100644
index 000000000000..c9247f8672ae
--- /dev/null
+++ b/src/arm/kirkwood-b3.dts
@@ -0,0 +1,201 @@
+/*
+ * Device Tree file for Excito Bubba B3
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: This requires a new'ish version of u-boot, which disables the
+ * L2 cache. If your B3 silently fails to boot, u-boot is probably too
+ * old. Either upgrade, or consider the following email:
+ *
+ * http://lists.debian.org/debian-arm/2012/08/msg00128.html
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Excito B3";
+	compatible = "excito,b3", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+	memory { /* 512 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			/* Wifi model has Atheros chipset on pcie port */
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_blue: pmx-led-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_beeper: pmx-beeper {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p16@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p16";
+				reg = <0>;
+				spi-max-frequency = <40000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0xc0000>;
+					label = "u-boot";
+				};
+
+				partition@c0000 {
+					reg = <0xc0000 0x20000>;
+					label = "u-boot env";
+				};
+
+				partition@e0000 {
+					reg = <0xe0000 0x120000>;
+					label = "data";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			/*
+			 * There is something on the bus at address 0x64.
+			 * Not yet identified what it is, maybe the eeprom
+			 * for the Atheros WiFi chip?
+			 */
+		};
+
+
+		serial@12000 {
+			/* Internal on test pins, 3.3v TTL
+		 	 * UART0_RX = Testpoint 65
+			 * UART0_TX = Testpoint 66
+			 * See the Excito Wiki for more details.
+		 	 */
+			status = "okay";
+		};
+
+		sata@80000 {
+			/* One internal, the second as eSATA */
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-leds {
+		/*
+		 * There is one LED "port" on the front and the colours
+		 * mix together giving some interesting combinations.
+		 */
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_green &pmx_led_red
+			      &pmx_led_blue >;
+		pinctrl-names = "default";
+
+		programming_led {
+			label = "bubba3:green:programming";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		error_led {
+			label = "bubba3:red:error";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		active_led {
+			label = "bubba3:blue:active";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power>;
+		pinctrl-names = "default";
+
+		power-button {
+			/* On the back */
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper: beeper {
+		/* 4KHz Piezoelectric buzzer */
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@24 {
+		device_type = "ethernet-phy";
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
diff --git a/src/arm/kirkwood-d2net.dts b/src/arm/kirkwood-d2net.dts
new file mode 100644
index 000000000000..6b7856025001
--- /dev/null
+++ b/src/arm/kirkwood-d2net.dts
@@ -0,0 +1,42 @@
+/*
+ * Device Tree file for d2 Network v2
+ *
+ * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie d2 Network v2";
+	compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "d2net_v2:blue:sata";
+			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "d2net_v2:red:fail";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/src/arm/kirkwood-ds109.dts b/src/arm/kirkwood-ds109.dts
new file mode 100644
index 000000000000..d4bcc1c7f6b3
--- /dev/null
+++ b/src/arm/kirkwood-ds109.dts
@@ -0,0 +1,42 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS109, DS110, DS110jv20";
+	compatible = "synology,ds109", "synology,ds110jv20",
+		     "synology,ds110", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds110jv10.dts b/src/arm/kirkwood-ds110jv10.dts
new file mode 100644
index 000000000000..95bf83b91b4a
--- /dev/null
+++ b/src/arm/kirkwood-ds110jv10.dts
@@ -0,0 +1,42 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS110j v10 and v30";
+	compatible = "synology,ds110jv10", "synology,ds110jv30",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds111.dts b/src/arm/kirkwood-ds111.dts
new file mode 100644
index 000000000000..61f47fbe44d0
--- /dev/null
+++ b/src/arm/kirkwood-ds111.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds112.dts b/src/arm/kirkwood-ds112.dts
new file mode 100644
index 000000000000..bf4143c6cb8f
--- /dev/null
+++ b/src/arm/kirkwood-ds112.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-30 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds209.dts b/src/arm/kirkwood-ds209.dts
new file mode 100644
index 000000000000..6d25093a9ac4
--- /dev/null
+++ b/src/arm/kirkwood-ds209.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS209";
+	compatible = "synology,ds209", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds210.dts b/src/arm/kirkwood-ds210.dts
new file mode 100644
index 000000000000..2f1933efcac1
--- /dev/null
+++ b/src/arm/kirkwood-ds210.dts
@@ -0,0 +1,47 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS210 v10, v20, v30, DS211j";
+	compatible = "synology,ds210jv10", "synology,ds210jv20",
+		     "synology,ds210jv30", "synology,ds211j",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds212.dts b/src/arm/kirkwood-ds212.dts
new file mode 100644
index 000000000000..99afd462f956
--- /dev/null
+++ b/src/arm/kirkwood-ds212.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+	compatible = "synology,ds212", "synology,ds212pv10",
+		     "synology,ds212pv10", "synology,ds212pv20",
+		     "synology,ds213airv10", "synology,ds213v10",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds212j.dts b/src/arm/kirkwood-ds212j.dts
new file mode 100644
index 000000000000..f5c4213fc67c
--- /dev/null
+++ b/src/arm/kirkwood-ds212j.dts
@@ -0,0 +1,42 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212j v10, v20";
+	compatible = "synology,ds212jv10", "synology,ds212jv20",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds409.dts b/src/arm/kirkwood-ds409.dts
new file mode 100644
index 000000000000..e80a962ebba0
--- /dev/null
+++ b/src/arm/kirkwood-ds409.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS409, DS410j";
+	compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds409slim.dts b/src/arm/kirkwood-ds409slim.dts
new file mode 100644
index 000000000000..cae5af4b88b5
--- /dev/null
+++ b/src/arm/kirkwood-ds409slim.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology 409slim";
+	compatible = "synology,ds409slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-20 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds411.dts b/src/arm/kirkwood-ds411.dts
new file mode 100644
index 000000000000..623cd4a37d71
--- /dev/null
+++ b/src/arm/kirkwood-ds411.dts
@@ -0,0 +1,53 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411, DS413jv10";
+	compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	regulators-hdd-34 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds411j.dts b/src/arm/kirkwood-ds411j.dts
new file mode 100644
index 000000000000..3348e330f074
--- /dev/null
+++ b/src/arm/kirkwood-ds411j.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411j";
+	compatible = "synology,ds411j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds411slim.dts b/src/arm/kirkwood-ds411slim.dts
new file mode 100644
index 000000000000..a0a1fad8b4de
--- /dev/null
+++ b/src/arm/kirkwood-ds411slim.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411slim";
+	compatible = "synology,ds411slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-km_common.dtsi b/src/arm/kirkwood-km_common.dtsi
new file mode 100644
index 000000000000..8367c772c764
--- /dev/null
+++ b/src/arm/kirkwood-km_common.dtsi
@@ -0,0 +1,48 @@
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
+			pinctrl-names = "default";
+
+			pmx_i2c_gpio_sda: pmx-gpio-sda {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_i2c_gpio_scl: pmx-gpio-scl {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
+			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <25>;
+};
diff --git a/src/arm/kirkwood-km_fixedeth.dts b/src/arm/kirkwood-km_fixedeth.dts
new file mode 100644
index 000000000000..9895f2b10f8a
--- /dev/null
+++ b/src/arm/kirkwood-km_fixedeth.dts
@@ -0,0 +1,23 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
+#include "kirkwood-km_common.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Fixed Eth";
+	compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;  /* <SPEED_1000> */
+		duplex = <1>; /* <DUPLEX_FULL> */
+	};
+};
diff --git a/src/arm/kirkwood-net2big.dts b/src/arm/kirkwood-net2big.dts
new file mode 100644
index 000000000000..53dc37a3b687
--- /dev/null
+++ b/src/arm/kirkwood-net2big.dts
@@ -0,0 +1,60 @@
+/*
+ * Device Tree file for LaCie 2Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 2Big Network v2";
+	compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&regulators {
+	regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <2>;
+		regulator-name = "hdd1power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+};
+
+&i2c0 {
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
diff --git a/src/arm/kirkwood-net5big.dts b/src/arm/kirkwood-net5big.dts
new file mode 100644
index 000000000000..36155b749d9f
--- /dev/null
+++ b/src/arm/kirkwood-net5big.dts
@@ -0,0 +1,111 @@
+/*
+ * Device Tree file for LaCie 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 5Big Network v2";
+	compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+};
+
+&regulators {
+	regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <2>;
+		regulator-name = "hdd1power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@3 {
+		compatible = "regulator-fixed";
+		reg = <3>;
+		regulator-name = "hdd2power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@4 {
+		compatible = "regulator-fixed";
+		reg = <4>;
+		regulator-name = "hdd3power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@5 {
+		compatible = "regulator-fixed";
+		reg = <5>;
+		regulator-name = "hdd4power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+};
+
+&mdio {
+	ethphy1: ethernet-phy@1 {
+		reg = <0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+
+&i2c0 {
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
diff --git a/src/arm/kirkwood-netxbig.dtsi b/src/arm/kirkwood-netxbig.dtsi
new file mode 100644
index 000000000000..b0cfb7cd30b9
--- /dev/null
+++ b/src/arm/kirkwood-netxbig.dtsi
@@ -0,0 +1,154 @@
+/*
+ * Device Tree common file for LaCie 2Big and 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * button@1 and button@2 represent a three position rocker
+		 * switch. Thus the conventional KEY_POWER does not fit
+		 */
+		button@1 {
+			label = "Back power switch (on|auto)";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Back power switch (auto|off)";
+			linux,code = <KEY_1>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			label = "Function button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators: regulators {
+		status = "okay";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd0power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_button_function: pmx-button-function {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+	pmx_button_power_off: pmx-button-power-off {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+	pmx_button_power_on: pmx-button-power-on {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
diff --git a/src/arm/kirkwood-nsa320.dts b/src/arm/kirkwood-nsa320.dts
new file mode 100644
index 000000000000..24f686d1044d
--- /dev/null
+++ b/src/arm/kirkwood-nsa320.dts
@@ -0,0 +1,215 @@
+/* Device tree file for the Zyxel NSA 320 NAS box.
+ *
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	model = "Zyxel NSA320";
+	compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			/* SATA Activity and Present pins are not connected */
+			pmx_sata0: pmx-sata0 {
+				marvell,pins ;
+				marvell,function = "sata0";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins ;
+				marvell,function = "sata1";
+			};
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_data: pmx-mcu-data {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_clk: pmx-mcu-clk {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_act: pmx-mcu-act {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_htp: pmx-htp {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			/* Buzzer needs to be switched at around 1kHz so is
+			   not compatible with the gpio-beeper driver. */
+			pmx_buzzer: pmx-buzzer {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_vid_b1: pmx-vid-b1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_data: pmx-power-resume-data {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_clk: pmx-power-resume-clk {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	regulators {
+		usb0_power: regulator@1 {
+			enable-active-high;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa320:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		orange-sys {
+			label = "nsa320:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa320:green:hdd1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa320:red:hdd1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa320:green:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa320:red:hdd2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa320:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa320:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa320:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* The following pins are currently not assigned to a driver,
+	   some of them should be configured as inputs.
+	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+		     &pmx_htp &pmx_vid_b1
+		     &pmx_power_resume_data &pmx_power_resume_clk>; */
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-nsa3x0-common.dtsi b/src/arm/kirkwood-nsa3x0-common.dtsi
new file mode 100644
index 000000000000..2075a2e828f1
--- /dev/null
+++ b/src/arm/kirkwood-nsa3x0-common.dtsi
@@ -0,0 +1,159 @@
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "ZyXEL NSA310";
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_off: pmx-pwr-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x0100000>;
+		read-only;
+	};
+	partition@100000 {
+		label = "uboot_env";
+		reg = <0x0100000 0x0080000>;
+	};
+	partition@180000 {
+		label = "key_store";
+		reg = <0x0180000 0x0080000>;
+	};
+	partition@200000 {
+		label = "info";
+		reg = <0x0200000 0x0080000>;
+	};
+	partition@280000 {
+		label = "etc";
+		reg = <0x0280000 0x0a00000>;
+	};
+	partition@c80000 {
+		label = "kernel_1";
+		reg = <0x0c80000 0x0a00000>;
+	};
+	partition@1680000 {
+		label = "rootfs1";
+		reg = <0x1680000 0x2fc0000>;
+	};
+	partition@4640000 {
+		label = "kernel_2";
+		reg = <0x4640000 0x0a00000>;
+	};
+	partition@5040000 {
+		label = "rootfs2";
+		reg = <0x5040000 0x2fc0000>;
+	};
+};
diff --git a/src/arm/kirkwood-openrd-base.dts b/src/arm/kirkwood-openrd-base.dts
new file mode 100644
index 000000000000..8af58999606d
--- /dev/null
+++ b/src/arm/kirkwood-openrd-base.dts
@@ -0,0 +1,42 @@
+/*
+ * Marvell OpenRD Base Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * base variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Base";
+	compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		serial@12100 {
+			status = "okay";
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-openrd-client.dts b/src/arm/kirkwood-openrd-client.dts
new file mode 100644
index 000000000000..887b9c1fee43
--- /dev/null
+++ b/src/arm/kirkwood-openrd-client.dts
@@ -0,0 +1,73 @@
+/*
+ * Marvell OpenRD Client Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * client variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Client";
+	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&cs42l51>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+	ethphy1: ethernet-phy@24 {
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
diff --git a/src/arm/kirkwood-openrd-ultimate.dts b/src/arm/kirkwood-openrd-ultimate.dts
new file mode 100644
index 000000000000..9f12f8b53e24
--- /dev/null
+++ b/src/arm/kirkwood-openrd-ultimate.dts
@@ -0,0 +1,58 @@
+/*
+ * Marvell OpenRD Ultimate Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * ultimate variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Ultimate";
+	compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-openrd.dtsi b/src/arm/kirkwood-openrd.dtsi
new file mode 100644
index 000000000000..d3330dadf7ed
--- /dev/null
+++ b/src/arm/kirkwood-openrd.dtsi
@@ -0,0 +1,90 @@
+/*
+ * Marvell OpenRD (Base|Client|Ultimate) Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
+			pinctrl-names = "default";
+
+			pmx_select28: pmx-select-uart-sd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_select34: pmx-select-rs232-rs484 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			status = "okay";
+			cd-gpios = <&gpio0 29 9>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "root";
+		reg = <0x0600000 0x1FA00000>;
+	};
+};
diff --git a/src/arm/kirkwood-rd88f6192.dts b/src/arm/kirkwood-rd88f6192.dts
new file mode 100644
index 000000000000..35a29dee8dd8
--- /dev/null
+++ b/src/arm/kirkwood-rd88f6192.dts
@@ -0,0 +1,111 @@
+/*
+ * Marvell RD88F6192 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Marvell RD88F6192 reference design";
+	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_usb_power>;
+			pinctrl-names = "default";
+
+                        pmx_usb_power: pmx-usb-power {
+                                marvell,pins = "mpp10";
+                                marvell,function = "gpo";
+                        };
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p128";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                pinctrl-0 = <&pmx_usb_power>;
+                pinctrl-names = "default";
+
+                usb_power: regulator@0 {
+                        compatible = "regulator-fixed";
+                        reg = <0>;
+                        regulator-name = "USB VBUS";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+                };
+	};
+};
+
+&mdio {
+        status = "okay";
+
+        ethphy0: ethernet-phy@8 {
+                reg = <8>;
+        };
+};
+
+&eth0 {
+        status = "okay";
+        ethernet0-port@0 {
+                phy-handle = <&ethphy0>;
+        };
+};
\ No newline at end of file
diff --git a/src/arm/kirkwood-rd88f6281-a0.dts b/src/arm/kirkwood-rd88f6281-a0.dts
new file mode 100644
index 000000000000..a803bbb70bc8
--- /dev/null
+++ b/src/arm/kirkwood-rd88f6281-a0.dts
@@ -0,0 +1,26 @@
+/*
+ * Marvell RD88F6181 A0 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions for the board with the A0 variant of
+ * the SoC. The ethernet switch does not have a "wan" port.
+ */
+
+/dts-v1/;
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with A0 SoC";
+	compatible = "marvell,rd88f6281-a0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	dsa@0 {
+		switch@0 {
+			reg = <10 0>;    /* MDIO address 10, switch 0 in tree */
+		};
+	};
+};
\ No newline at end of file
diff --git a/src/arm/kirkwood-rd88f6281-a1.dts b/src/arm/kirkwood-rd88f6281-a1.dts
new file mode 100644
index 000000000000..baeebbf1d8c7
--- /dev/null
+++ b/src/arm/kirkwood-rd88f6281-a1.dts
@@ -0,0 +1,31 @@
+/*
+ * Marvell RD88F6181 A1 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions for the board with the A1 variant of
+ * the SoC. The ethernet switch has a "wan" port.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with A1 SoC";
+	compatible = "marvell,rd88f6281-a1", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	dsa@0 {
+		switch@0 {
+			reg = <0 0>;    /* MDIO address 0, switch 0 in tree */
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+		};
+	};
+};
\ No newline at end of file
diff --git a/src/arm/kirkwood-rd88f6281.dtsi b/src/arm/kirkwood-rd88f6281.dtsi
new file mode 100644
index 000000000000..26cf0e0ccefd
--- /dev/null
+++ b/src/arm/kirkwood-rd88f6281.dtsi
@@ -0,0 +1,153 @@
+/*
+ * Marvell RD88F6181 Common Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the two
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_sdio_cd>;
+			pinctrl-names = "default";
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			/* No WP GPIO */
+		};
+	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0>;
+		dsa,mii-bus = <&ethphy1>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+		};
+       };
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x200000>;
+	};
+
+	partition@300000 {
+		label = "data";
+		reg = <0x0300000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@ff {
+		reg = <0xff>; /* No PHY attached */
+		speed = <1000>;
+		duple = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-rs212.dts b/src/arm/kirkwood-rs212.dts
new file mode 100644
index 000000000000..3b19f1fd4cac
--- /dev/null
+++ b/src/arm/kirkwood-rs212.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS212";
+	compatible = "synology,rs212", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-38 {
+		status = "okay";
+	};
+
+	regulators-hdd-30-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-rs409.dts b/src/arm/kirkwood-rs409.dts
new file mode 100644
index 000000000000..921ca49e85a4
--- /dev/null
+++ b/src/arm/kirkwood-rs409.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS409";
+	compatible = "synology,rs409", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-rs411.dts b/src/arm/kirkwood-rs411.dts
new file mode 100644
index 000000000000..02852b0c809f
--- /dev/null
+++ b/src/arm/kirkwood-rs411.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS411 RS812";
+	compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-synology.dtsi b/src/arm/kirkwood-synology.dtsi
new file mode 100644
index 000000000000..811e0971fc58
--- /dev/null
+++ b/src/arm/kirkwood-synology.dtsi
@@ -0,0 +1,863 @@
+/*
+ * Nodes for Marvell 628x Synology devices
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie2: pcie@2,0 {
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_alarmled_12: pmx-alarmled-12 {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_15: pmx-fanctrl-15 {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_16: pmx-fanctrl-16 {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_17: pmx-fanctrl-17 {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_18: pmx-fanalarm-18 {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+
+			pmx_hddled_20: pmx-hddled-20 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_21: pmx-hddled-21 {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_22: pmx-hddled-22 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_23: pmx-hddled-23 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_24: pmx-hddled-24 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_25: pmx-hddled-25 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_26: pmx-hddled-26 {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_27: pmx-hddled-27 {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_28: pmx-hddled-28 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_32: pmx-fanctrl-32 {
+				marvell,pins = "mpp32";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_33: pmx-fanctrl-33 {
+				marvell,pins = "mpp33";
+				marvell,function = "gpo";
+			};
+
+			pmx_fanctrl_34: pmx-fanctrl-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_35: pmx-fanalarm-35 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_36: pmx-hddled-36 {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_37: pmx-hddled-37 {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_38: pmx-hddled-38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_39: pmx-hddled-39 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_40: pmx-hddled-40 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_41: pmx-hddled-41 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_42: pmx-hddled-42 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_43: pmx-hddled-43 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_44: pmx-hddled-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_45: pmx-hddled-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_44: pmx-fanalarm-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_45: pmx-fanalarm-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@00000000 {
+					reg = <0x00000000 0x00080000>;
+					label = "RedBoot";
+				};
+
+				partition@00080000 {
+					reg = <0x00080000 0x00200000>;
+					label = "zImage";
+				};
+
+				partition@00280000 {
+					reg = <0x00280000 0x00140000>;
+					label = "rd.gz";
+				};
+
+				partition@003c0000 {
+					reg = <0x003c0000 0x00010000>;
+					label = "vendor";
+				};
+
+				partition@003d0000 {
+					reg = <0x003d0000 0x00020000>;
+					label = "RedBoot config";
+				};
+
+				partition@003f0000 {
+					reg = <0x003f0000 0x00010000>;
+					label = "FIS directory";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			rs5c372: rs5c372@32 {
+				status = "disabled";
+				compatible = "ricoh,rs5c372";
+				reg = <0x32>;
+			};
+
+			s35390a: s35390a@30 {
+				status = "disabled";
+				compatible = "ssi,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		poweroff@12100 {
+			compatible = "synology,power-off";
+			reg = <0x12100 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-fan-150-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+			       &gpio1 12 GPIO_ACTIVE_HIGH
+			       &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-leds-alarm-12 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_alarmled_12>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:alarm";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-20 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
+			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
+			     &pmx_hddled_26 &pmx_hddled_27>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-36 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
+			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
+			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
+			     &pmx_hddled_45>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-green {
+			label = "synology:green:hdd5";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-amber {
+			label = "synology:amber:hdd5";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-38 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators-hdd-29 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-1 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-2 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-4 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-31 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-34 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+			     &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <9>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "disabled";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-t5325.dts b/src/arm/kirkwood-t5325.dts
new file mode 100644
index 000000000000..610ec0f95858
--- /dev/null
+++ b/src/arm/kirkwood-t5325.dts
@@ -0,0 +1,231 @@
+/*
+ * Device Tree file for HP t5325 Thin Client"
+ *
+ * Copyright (C) 2014
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "HP t5325 Thin Client";
+	compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
+			pinctrl-names = "default";
+
+			pmx_button_power: pmx-button_power {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+			pmx_led: pmx-led {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
+				marvell,function = "spi";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_i2s: pmx-i2s {
+				marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
+					       "mpp43";
+				marvell,function = "audio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80";
+				spi-max-frequency = <86000000>;
+				reg = <0>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@1 {
+					reg = <0x80000 0x40000>;
+					label = "SSD firmware";
+				};
+
+				partition@2 {
+					reg = <0xc0000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@3 {
+					reg = <0xd0000 0x10000>;
+					label = "permanent u-boot env";
+				};
+
+				partition@4 {
+					reg = <0xd0000 0x10000>;
+					label = "permanent u-boot env";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			alc5621: alc5621@1a {
+				compatible = "realtek,alc5621";
+				reg = <0x1a>;
+				#sound-dai-cells = <0>;
+				add-ctrl = <0x3700>;
+				jack-det-ctrl = <0x4810>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		audio: audio-controller@a0000 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_sata_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB-SATA Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_power>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPKOUT",
+			"Speaker", "SPKOUTN",
+			"MIC1", "Mic Jack",
+			"MIC2", "Mic Jack";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker",
+			"Microphone", "Mic Jack";
+
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&alc5621>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-ts419-6281.dts b/src/arm/kirkwood-ts419-6281.dts
new file mode 100644
index 000000000000..aa22aa862857
--- /dev/null
+++ b/src/arm/kirkwood-ts419-6281.dts
@@ -0,0 +1,20 @@
+/*
+ * Device Tree file for QNAP TS41X with 6281 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+&ethphy0 { reg = <8>; };
+&ethphy1 { reg = <0>; };
diff --git a/src/arm/kirkwood-ts419-6282.dts b/src/arm/kirkwood-ts419-6282.dts
new file mode 100644
index 000000000000..d7512d4cdced
--- /dev/null
+++ b/src/arm/kirkwood-ts419-6282.dts
@@ -0,0 +1,32 @@
+/*
+ * Device Tree file for QNAP TS41X with 6282 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+/ {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
+&ethphy1 { reg = <1>; };
diff --git a/src/arm/kirkwood-ts419.dtsi b/src/arm/kirkwood-ts419.dtsi
new file mode 100644
index 000000000000..30ab93bfb1e4
--- /dev/null
+++ b/src/arm/kirkwood-ts419.dtsi
@@ -0,0 +1,75 @@
+/*
+ * Device Tree include file for QNAP TS41X
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/ {
+	model = "QNAP TS419 family";
+	compatible = "qnap,ts419", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			/*
+			 * JP1 indicates if an LCD module is installed
+			 * on the serial port (0), or if the port is used
+			 * as a console (1).
+			 */
+			pmx_jumper_jp1: pmx-jumper_jp1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/mt6589-aquaris5.dts b/src/arm/mt6589-aquaris5.dts
new file mode 100644
index 000000000000..443b4467de15
--- /dev/null
+++ b/src/arm/mt6589-aquaris5.dts
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+	model = "bq Aquaris5";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+};
diff --git a/src/arm/mt6589.dtsi b/src/arm/mt6589.dtsi
new file mode 100644
index 000000000000..d0297a051549
--- /dev/null
+++ b/src/arm/mt6589.dtsi
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "mediatek,mt6589";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		system_clk: dummy13m {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		rtc_clk: dummy32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		gic: interrupt-controller@10212000 {
+			compatible = "arm,cortex-a15-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x1000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+		};
+	};
+};
diff --git a/src/arm/omap-gpmc-smsc9221.dtsi b/src/arm/omap-gpmc-smsc9221.dtsi
new file mode 100644
index 000000000000..73e272fadc20
--- /dev/null
+++ b/src/arm/omap-gpmc-smsc9221.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Common file for GPMC connected smsc9221 on omaps
+ *
+ * Compared to smsc911x, smsc9221 (and others like smsc9217
+ * or smsc 9218) has faster timings, leading to higher
+ * bandwidth.
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <42>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <42>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <36>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <54>;
+		gpmc,access-ns = <36>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <18>;
+		gpmc,wr-access-ns = <42>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/src/arm/omap2420-clocks.dtsi b/src/arm/omap2420-clocks.dtsi
new file mode 100644
index 000000000000..ce8c742d7e92
--- /dev/null
+++ b/src/arm/omap2420-clocks.dtsi
@@ -0,0 +1,270 @@
+/*
+ * Device Tree Source for OMAP2420 clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&prcm_clocks {
+	sys_clkout2_src_gate: sys_clkout2_src_gate {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout2_src_mux: sys_clkout2_src_mux {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout2_src: sys_clkout2_src {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
+	};
+
+	sys_clkout2: sys_clkout2 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkout2_src>;
+		ti,bit-shift = <11>;
+		ti,max-div = <64>;
+		reg = <0x0070>;
+		ti,index-power-of-two;
+	};
+
+	dsp_gate_ick: dsp_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <1>;
+		reg = <0x0810>;
+	};
+
+	dsp_div_ick: dsp_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0840>;
+		ti,index-starts-at-one;
+	};
+
+	dsp_ick: dsp_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
+	};
+
+	iva1_gate_ifck: iva1_gate_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0800>;
+	};
+
+	iva1_div_ifck: iva1_div_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0840>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
+	};
+
+	iva1_ifck: iva1_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>;
+	};
+
+	iva1_ifck_div: iva1_ifck_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&iva1_ifck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	iva1_mpu_int_ifck: iva1_mpu_int_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&iva1_ifck_div>;
+		ti,bit-shift = <8>;
+		reg = <0x0800>;
+	};
+
+	wdt3_ick: wdt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <28>;
+		reg = <0x0210>;
+	};
+
+	wdt3_fck: wdt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <28>;
+		reg = <0x0200>;
+	};
+
+	mmc_ick: mmc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x0210>;
+	};
+
+	mmc_fck: mmc_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x0200>;
+	};
+
+	eac_ick: eac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0210>;
+	};
+
+	eac_fck: eac_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0200>;
+	};
+
+	i2c1_fck: i2c1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0200>;
+	};
+
+	i2c2_fck: i2c2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0200>;
+	};
+
+	vlynq_ick: vlynq_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0210>;
+	};
+
+	vlynq_gate_fck: vlynq_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0200>;
+	};
+
+	core_d18_ck: core_d18_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <18>;
+	};
+
+	vlynq_mux_fck: vlynq_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0240>;
+	};
+
+	vlynq_fck: vlynq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>;
+	};
+};
+
+&prcm_clockdomains {
+	gfx_clkdm: gfx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_ick>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
+			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
+			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>;
+	};
+
+	iva1_clkdm: iva1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&iva1_mpu_int_ifck>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_ick>, <&dss_54m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
+			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
+			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
+			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>,
+			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
+			 <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>,
+			 <&uart3_ick>, <&uart3_fck>, <&cam_ick>,
+			 <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>,
+			 <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>,
+			 <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>,
+			 <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>,
+			 <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>,
+			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
+			 <&pka_ick>;
+	};
+};
+
+&func_96m_ck {
+	compatible = "fixed-factor-clock";
+	clocks = <&apll96_ck>;
+	clock-mult = <1>;
+	clock-div = <1>;
+};
+
+&dsp_div_fck {
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
+};
+
+&ssi_ssr_sst_div_fck {
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/src/arm/omap2430-clocks.dtsi b/src/arm/omap2430-clocks.dtsi
new file mode 100644
index 000000000000..805f75df1cf2
--- /dev/null
+++ b/src/arm/omap2430-clocks.dtsi
@@ -0,0 +1,344 @@
+/*
+ * Device Tree Source for OMAP2430 clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&scrm_clocks {
+	mcbsp3_mux_fck: mcbsp3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		reg = <0x02e8>;
+	};
+
+	mcbsp3_fck: mcbsp3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+	};
+
+	mcbsp4_mux_fck: mcbsp4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x02e8>;
+	};
+
+	mcbsp4_fck: mcbsp4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+	};
+
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02e8>;
+	};
+
+	mcbsp5_fck: mcbsp5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+	};
+};
+
+&prcm_clocks {
+	iva2_1_gate_ick: iva2_1_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0800>;
+	};
+
+	iva2_1_div_ick: iva2_1_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0840>;
+		ti,index-starts-at-one;
+	};
+
+	iva2_1_ick: iva2_1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
+	};
+
+	mdm_gate_ick: mdm_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0c10>;
+	};
+
+	mdm_div_ick: mdm_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		reg = <0x0c40>;
+		ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>;
+	};
+
+	mdm_ick: mdm_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
+	};
+
+	mdm_osc_ck: mdm_osc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&osc_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0c00>;
+	};
+
+	mcbsp3_ick: mcbsp3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0214>;
+	};
+
+	mcbsp3_gate_fck: mcbsp3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <3>;
+		reg = <0x0204>;
+	};
+
+	mcbsp4_ick: mcbsp4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0214>;
+	};
+
+	mcbsp4_gate_fck: mcbsp4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x0204>;
+	};
+
+	mcbsp5_ick: mcbsp5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0214>;
+	};
+
+	mcbsp5_gate_fck: mcbsp5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <5>;
+		reg = <0x0204>;
+	};
+
+	mcspi3_ick: mcspi3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0214>;
+	};
+
+	mcspi3_fck: mcspi3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0204>;
+	};
+
+	icr_ick: icr_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0410>;
+	};
+
+	i2chs1_fck: i2chs1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2430-interface-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0204>;
+	};
+
+	i2chs2_fck: i2chs2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2430-interface-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0204>;
+	};
+
+	usbhs_ick: usbhs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0214>;
+	};
+
+	mmchs1_ick: mmchs1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0214>;
+	};
+
+	mmchs1_fck: mmchs1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0204>;
+	};
+
+	mmchs2_ick: mmchs2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0214>;
+	};
+
+	mmchs2_fck: mmchs2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0204>;
+	};
+
+	gpio5_ick: gpio5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0214>;
+	};
+
+	gpio5_fck: gpio5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0204>;
+	};
+
+	mdm_intc_ick: mdm_intc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0214>;
+	};
+
+	mmchsdb1_fck: mmchsdb1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0204>;
+	};
+
+	mmchsdb2_fck: mmchsdb2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0204>;
+	};
+};
+
+&prcm_clockdomains {
+	gfx_clkdm: gfx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_ick>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
+			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
+			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>,
+			 <&icr_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_ick>, <&dss_54m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
+			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
+			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
+			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>,
+			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
+			 <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>,
+			 <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>,
+			 <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>,
+			 <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>,
+			 <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>,
+			 <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>,
+			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
+			 <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>,
+			 <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>,
+			 <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>,
+			 <&mmchsdb2_fck>;
+	};
+
+	mdm_clkdm: mdm_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mdm_osc_ck>;
+	};
+};
+
+&func_96m_ck {
+	compatible = "ti,mux-clock";
+	clocks = <&apll96_ck>, <&alt_ck>;
+	ti,bit-shift = <4>;
+	reg = <0x0540>;
+};
+
+&dsp_div_fck {
+	ti,max-div = <4>;
+	ti,index-starts-at-one;
+};
+
+&ssi_ssr_sst_div_fck {
+	ti,max-div = <5>;
+	ti,index-starts-at-one;
+};
diff --git a/src/arm/omap24xx-clocks.dtsi b/src/arm/omap24xx-clocks.dtsi
new file mode 100644
index 000000000000..a1365ca926eb
--- /dev/null
+++ b/src/arm/omap24xx-clocks.dtsi
@@ -0,0 +1,1244 @@
+/*
+ * Device Tree Source for OMAP24xx clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm_clocks {
+	mcbsp1_mux_fck: mcbsp1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x0274>;
+	};
+
+	mcbsp1_fck: mcbsp1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+	};
+
+	mcbsp2_mux_fck: mcbsp2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <6>;
+		reg = <0x0274>;
+	};
+
+	mcbsp2_fck: mcbsp2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+	};
+};
+
+&prcm_clocks {
+	func_32k_ck: func_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	secure_32k_ck: secure_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12m_ck: virt_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13m_ck: virt_13m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26m_ck: virt_26m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	aplls_clkin_ck: aplls_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0540>;
+	};
+
+	aplls_clkin_x2_ck: aplls_clkin_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&aplls_clkin_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	osc_ck: osc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0060>;
+		ti,index-starts-at-one;
+	};
+
+	sys_ck: sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&osc_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x0060>;
+		ti,index-starts-at-one;
+	};
+
+	alt_ck: alt_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <54000000>;
+	};
+
+	mcbsp_clks: mcbsp_clks {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	dpll_ck: dpll_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0500>, <0x0540>;
+	};
+
+	apll96_ck: apll96_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		ti,idlest-shift = <8>;
+		ti,clock-frequency = <96000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
+
+	apll54_ck: apll54_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		ti,idlest-shift = <9>;
+		ti,clock-frequency = <54000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
+
+	func_54m_ck: func_54m_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&apll54_ck>, <&alt_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0540>;
+	};
+
+	core_ck: core_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	func_96m_ck: func_96m_ck {
+		#clock-cells = <0>;
+	};
+
+	apll96_d2_ck: apll96_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll96_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_48m_ck: func_48m_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&apll96_d2_ck>, <&alt_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0540>;
+	};
+
+	func_12m_ck: func_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&func_48m_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	sys_clkout_src_gate: sys_clkout_src_gate {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout_src_mux: sys_clkout_src_mux {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout_src: sys_clkout_src {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
+	};
+
+	sys_clkout: sys_clkout {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkout_src>;
+		ti,bit-shift = <3>;
+		ti,max-div = <64>;
+		reg = <0x0070>;
+		ti,index-power-of-two;
+	};
+
+	emul_ck: emul_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_54m_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0078>;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+	};
+
+	dsp_gate_fck: dsp_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0800>;
+	};
+
+	dsp_div_fck: dsp_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		reg = <0x0840>;
+	};
+
+	dsp_fck: dsp_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
+	};
+
+	core_l3_ck: core_l3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0240>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_3d_gate_fck: gfx_3d_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0300>;
+	};
+
+	gfx_3d_div_fck: gfx_3d_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,max-div = <4>;
+		reg = <0x0340>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_3d_fck: gfx_3d_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
+	};
+
+	gfx_2d_gate_fck: gfx_2d_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0300>;
+	};
+
+	gfx_2d_div_fck: gfx_2d_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,max-div = <4>;
+		reg = <0x0340>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_2d_fck: gfx_2d_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
+	};
+
+	gfx_ick: gfx_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0310>;
+	};
+
+	l4_ck: l4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0240>;
+		ti,index-starts-at-one;
+	};
+
+	dss_ick: dss_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0210>;
+	};
+
+	dss1_gate_fck: dss1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0200>;
+	};
+
+	core_d2_ck: core_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	core_d3_ck: core_d3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	core_d4_ck: core_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	core_d5_ck: core_d5_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <5>;
+	};
+
+	core_d6_ck: core_d6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	core_d8_ck: core_d8_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	core_d9_ck: core_d9_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <9>;
+	};
+
+	core_d12_ck: core_d12_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <12>;
+	};
+
+	core_d16_ck: core_d16_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dss1_mux_fck: dss1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0240>;
+	};
+
+	dss1_fck: dss1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
+	};
+
+	dss2_gate_fck: dss2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0200>;
+	};
+
+	dss2_mux_fck: dss2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&func_48m_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0240>;
+	};
+
+	dss2_fck: dss2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
+	};
+
+	dss_54m_fck: dss_54m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_54m_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0200>;
+	};
+
+	ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0204>;
+	};
+
+	ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0240>;
+	};
+
+	ssi_ssr_sst_fck: ssi_ssr_sst_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
+	};
+
+	usb_l4_gate_ick: usb_l4_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0214>;
+	};
+
+	usb_l4_div_ick: usb_l4_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0240>;
+		ti,dividers = <0>, <1>, <2>, <0>, <4>;
+	};
+
+	usb_l4_ick: usb_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0214>;
+	};
+
+	gpt1_ick: gpt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0410>;
+	};
+
+	gpt1_gate_fck: gpt1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0400>;
+	};
+
+	gpt1_mux_fck: gpt1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		reg = <0x0440>;
+	};
+
+	gpt1_fck: gpt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+	};
+
+	gpt2_ick: gpt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0210>;
+	};
+
+	gpt2_gate_fck: gpt2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0200>;
+	};
+
+	gpt2_mux_fck: gpt2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0244>;
+	};
+
+	gpt2_fck: gpt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+	};
+
+	gpt3_ick: gpt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0210>;
+	};
+
+	gpt3_gate_fck: gpt3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0200>;
+	};
+
+	gpt3_mux_fck: gpt3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0244>;
+	};
+
+	gpt3_fck: gpt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+	};
+
+	gpt4_ick: gpt4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0210>;
+	};
+
+	gpt4_gate_fck: gpt4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0200>;
+	};
+
+	gpt4_mux_fck: gpt4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0244>;
+	};
+
+	gpt4_fck: gpt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+	};
+
+	gpt5_ick: gpt5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0210>;
+	};
+
+	gpt5_gate_fck: gpt5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0200>;
+	};
+
+	gpt5_mux_fck: gpt5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0244>;
+	};
+
+	gpt5_fck: gpt5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+	};
+
+	gpt6_ick: gpt6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0210>;
+	};
+
+	gpt6_gate_fck: gpt6_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0200>;
+	};
+
+	gpt6_mux_fck: gpt6_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0244>;
+	};
+
+	gpt6_fck: gpt6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+	};
+
+	gpt7_ick: gpt7_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0210>;
+	};
+
+	gpt7_gate_fck: gpt7_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0200>;
+	};
+
+	gpt7_mux_fck: gpt7_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0244>;
+	};
+
+	gpt7_fck: gpt7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+	};
+
+	gpt8_ick: gpt8_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0210>;
+	};
+
+	gpt8_gate_fck: gpt8_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0200>;
+	};
+
+	gpt8_mux_fck: gpt8_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0244>;
+	};
+
+	gpt8_fck: gpt8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+	};
+
+	gpt9_ick: gpt9_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0210>;
+	};
+
+	gpt9_gate_fck: gpt9_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0200>;
+	};
+
+	gpt9_mux_fck: gpt9_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0244>;
+	};
+
+	gpt9_fck: gpt9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+	};
+
+	gpt10_ick: gpt10_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0210>;
+	};
+
+	gpt10_gate_fck: gpt10_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0200>;
+	};
+
+	gpt10_mux_fck: gpt10_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0244>;
+	};
+
+	gpt10_fck: gpt10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+	};
+
+	gpt11_ick: gpt11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0210>;
+	};
+
+	gpt11_gate_fck: gpt11_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0200>;
+	};
+
+	gpt11_mux_fck: gpt11_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0244>;
+	};
+
+	gpt11_fck: gpt11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+	};
+
+	gpt12_ick: gpt12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0210>;
+	};
+
+	gpt12_gate_fck: gpt12_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0200>;
+	};
+
+	gpt12_mux_fck: gpt12_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0244>;
+	};
+
+	gpt12_fck: gpt12_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
+	};
+
+	mcbsp1_ick: mcbsp1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0210>;
+	};
+
+	mcbsp1_gate_fck: mcbsp1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <15>;
+		reg = <0x0200>;
+	};
+
+	mcbsp2_ick: mcbsp2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0210>;
+	};
+
+	mcbsp2_gate_fck: mcbsp2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <16>;
+		reg = <0x0200>;
+	};
+
+	mcspi1_ick: mcspi1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0210>;
+	};
+
+	mcspi1_fck: mcspi1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0200>;
+	};
+
+	mcspi2_ick: mcspi2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0210>;
+	};
+
+	mcspi2_fck: mcspi2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0200>;
+	};
+
+	uart1_ick: uart1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0210>;
+	};
+
+	uart1_fck: uart1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0200>;
+	};
+
+	uart2_ick: uart2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0210>;
+	};
+
+	uart2_fck: uart2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0200>;
+	};
+
+	uart3_ick: uart3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	uart3_fck: uart3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0204>;
+	};
+
+	gpios_ick: gpios_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0410>;
+	};
+
+	gpios_fck: gpios_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0400>;
+	};
+
+	mpu_wdt_ick: mpu_wdt_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0410>;
+	};
+
+	mpu_wdt_fck: mpu_wdt_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0400>;
+	};
+
+	sync_32k_ick: sync_32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0410>;
+	};
+
+	wdt1_ick: wdt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0410>;
+	};
+
+	omapctrl_ick: omapctrl_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0410>;
+	};
+
+	cam_fck: cam_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0200>;
+	};
+
+	cam_ick: cam_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0210>;
+	};
+
+	mailboxes_ick: mailboxes_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <30>;
+		reg = <0x0210>;
+	};
+
+	wdt4_ick: wdt4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0210>;
+	};
+
+	wdt4_fck: wdt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0200>;
+	};
+
+	mspro_ick: mspro_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x0210>;
+	};
+
+	mspro_fck: mspro_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x0200>;
+	};
+
+	fac_ick: fac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0210>;
+	};
+
+	fac_fck: fac_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0200>;
+	};
+
+	hdq_ick: hdq_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0210>;
+	};
+
+	hdq_fck: hdq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0200>;
+	};
+
+	i2c1_ick: i2c1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0210>;
+	};
+
+	i2c2_ick: i2c2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0210>;
+	};
+
+	gpmc_fck: gpmc_fck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <1>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	sdma_fck: sdma_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sdma_ick: sdma_ick {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <0>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	sdrc_ick: sdrc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <2>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	des_ick: des_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x021c>;
+	};
+
+	sha_ick: sha_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x021c>;
+	};
+
+	rng_ick: rng_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+
+	aes_ick: aes_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x021c>;
+	};
+
+	pka_ick: pka_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x021c>;
+	};
+
+	usb_fck: usb_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0204>;
+	};
+};
diff --git a/src/arm/omap3-beagle-xm-ab.dts b/src/arm/omap3-beagle-xm-ab.dts
new file mode 100644
index 000000000000..7ac3bcf59d59
--- /dev/null
+++ b/src/arm/omap3-beagle-xm-ab.dts
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-beagle-xm.dts"
+
+/ {
+	/* HS USB Port 2 Power enable was inverted with the xM C */
+	hsusb2_power: hsusb2_power_reg {
+		enable-active-high;
+	};
+};
diff --git a/src/arm/omap3-cm-t3517.dts b/src/arm/omap3-cm-t3517.dts
new file mode 100644
index 000000000000..d00502f4fd9b
--- /dev/null
+++ b/src/arm/omap3-cm-t3517.dts
@@ -0,0 +1,136 @@
+/*
+ * Support for CompuLab CM-T3517
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+#include "omap3-cm-t3x.dtsi"
+
+/ {
+	model = "CompuLab CM-T3517";
+	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+	vmmc:  regulator-vmmc {
+                compatible = "regulator-fixed";
+                regulator-name = "vmmc";
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+        };
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vw1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+				&wl12xx_wkup_pins
+				&wl12xx_core_pins
+			    >;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	wl12xx_vaux2: wl12xx_vaux2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271_vaux2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&omap3_pmx_wkup {
+
+	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4)	/* sys_boot4.gpio_6 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+
+	phy1_reset_pins: pinmux_hsusb1_phy_reset_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4)	/* uart2_tx.gpio_146 */
+		>;
+	};
+
+	phy2_reset_pins: pinmux_hsusb2_phy_reset_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4)	/* uart2_rx.gpio_147 */
+		>;
+	};
+
+	otg_drv_vbus: pinmux_otg_drv_vbus {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	wl12xx_core_pins: pinmux_wl12xx_core_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs5.gpio_56 */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	usb_hub_pins: pinmux_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 - USB HUB RST */
+		>;
+	};
+};
+
+&hsusb1_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy1_reset_pins>;
+	reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy2_reset_pins>;
+	reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
+};
+
+&davinci_emac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&am35x_otg_hs {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&otg_drv_vbus>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	vmmc_aux-supply = <&wl12xx_vaux2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
diff --git a/src/arm/omap3-cm-t3530.dts b/src/arm/omap3-cm-t3530.dts
new file mode 100644
index 000000000000..d1458496520e
--- /dev/null
+++ b/src/arm/omap3-cm-t3530.dts
@@ -0,0 +1,48 @@
+/*
+ * Support for CompuLab CM-T3530
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+	model = "CompuLab CM-T3530";
+	compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+
+	/* Regulator to trigger the reset signal of the Wifi module */
+	mmc2_sdio_reset: regulator-mmc2-sdio-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-mmc2-sdio-reset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&mmc2_sdio_reset>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
diff --git a/src/arm/omap3-cm-t3x.dtsi b/src/arm/omap3-cm-t3x.dtsi
new file mode 100644
index 000000000000..c671a2299ea8
--- /dev/null
+++ b/src/arm/omap3-cm-t3x.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Common support for CompuLab CM-T3x CoMs
+ */
+
+/ {
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&green_led_pins>;
+		ledb {
+			label = "cm-t3x:green";
+			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&hsusb1_power>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&hsusb2_power>;
+	};
+};
+
+&omap3_pmx_core {
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	green_led_pins: pinmux_green_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
+		>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+&usbhshost {
+	port1-mode = "ehci-phy";
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy &hsusb2_phy>;
+};
diff --git a/src/arm/omap3-lilly-a83x.dtsi b/src/arm/omap3-lilly-a83x.dtsi
new file mode 100644
index 000000000000..d97308896f0c
--- /dev/null
+++ b/src/arm/omap3-lilly-a83x.dtsi
@@ -0,0 +1,459 @@
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "INCOstartec LILLY-A83X module (DM3730)";
+	compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
+
+	chosen {
+			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;   /* 128 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "lilly-a83x::led1";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "lilly-a83x";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	reg_vcc3: vcc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_vcc3>;
+	};
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_129 */
+		>;
+	};
+
+	tsc2048_pins: pinmux_tsc2048_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4)   /* sys_boot6.gpio_8 */
+		>;
+	};
+
+	mmc1cd_pins: pinmux_mmc1cd_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_126 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)   /* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)   /* uart1_rts.uart1_rts */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)    /* uart1_cts.uart1_cts */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)    /* uart1_rx.uart1_rx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)   /* mcbsp3_clkx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)    /* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)    /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)   /* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+		>;
+	};
+
+	hsusb1_pins: pinmux_hsusb1_pins {
+		pinctrl-single,pins = <
+
+			/* GPIO 182 controls USB-Hub reset. But USB-Phy its
+			 * reset can't be controlled. So we clamp this GPIO to
+			 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
+			 */
+
+			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcspi2_cs1.gpio_182 */
+		>;
+	};
+
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)   /* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)  /* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)   /* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)   /* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)   /* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)   /* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)   /* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)   /* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)   /* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)   /* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)   /* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)   /* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	spi2_pins: pinmux_spi2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_clk.mcspi2_clk */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_simo.mcspi2_simo */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_somi.mcspi2_somi */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0)   /* mcspi2_cs0.mcspi2_cs0 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+
+	hsusb1_2_pins: pinmux_hsusb1_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)  /* etk_clk.hsusb1_stp */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3)   /* etk_ctl.hsusb1_clk */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)   /* etk_d0.hsusb1_data0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)   /* etk_d1.hsusb1_data1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)   /* etk_d2.hsusb1_data2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)   /* etk_d3.hsusb1_data7 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)   /* etk_d4.hsusb1_data4 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)   /* etk_d5.hsusb1_data5 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)   /* etk_d6.hsusb1_data6 */
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)   /* etk_d7.hsusb1_data3 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)   /* etk_d8.hsusb1_dir */
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)   /* etk_d9.hsusb1_nxt */
+		>;
+	};
+
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)   /* etk_d15.gpio_29 */
+		>;
+	};
+
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&gpio6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>;   /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+	vmmc1: regulator-vmmc1 {
+		regulator-always-on;
+	};
+
+	vdd1: regulator-vdd1 {
+		regulator-always-on;
+	};
+
+	vdd2: regulator-vdd2 {
+		regulator-always-on;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+		gpiom1: gpio@20 {
+			compatible = "mcp,mcp23017";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x20>;
+		};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&mmc1 {
+	cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+	cd-inverted;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+
+	tsc2046@0 {
+		reg = <0>;   /* CS0 */
+		compatible = "ti,tsc2046";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 0>;   /* boot6 / gpio_8 */
+		spi-max-frequency = <1000000>;
+		pendown-gpio = <&gpio1 8 0>;
+		vcc-supply = <&reg_vcc3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2048_pins>;
+
+		ti,x-min = <300>;
+		ti,x-max = <3000>;
+		ti,y-min = <600>;
+		ti,y-max = <3600>;
+		ti,x-plate-ohms = <80>;
+		ti,pressure-max = <255>;
+		ti,swap-xy;
+
+		linux,wakeup;
+	};
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_2_pins>;
+	num-ports = <2>;
+	port1-mode = "ehci-phy";
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,
+		<7 0 0x15000000 0x01000000>;
+
+	nand@0,0 {
+		reg = <0 0 0x1000000>;
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		/* no elm on omap3 */
+
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <2>;
+		gpmc,wait-pin = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,burst-length= <4>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <100>;
+		gpmc,cs-wr-off-ns = <100>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <100>;
+		gpmc,adv-wr-off-ns = <100>;
+		gpmc,oe-on-ns = <5>;
+		gpmc,oe-off-ns = <75>;
+		gpmc,we-on-ns = <5>;
+		gpmc,we-off-ns = <75>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <60>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-delay-ns = <50>;
+		gpmc,wr-data-mux-bus-ns = <75>;
+		gpmc,wr-access-ns = <155>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "MLO";
+			reg = <0 0x80000>;
+		};
+
+		partition@0x80000 {
+			label = "u-boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		partition@0x260000 {
+			label = "u-boot-environment";
+			reg = <0x260000 0x20000>;
+		};
+
+		partition@0x280000 {
+			label = "kernel";
+			reg = <0x280000 0x500000>;
+		};
+
+		partition@0x780000 {
+			label = "filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+
+	ethernet@7,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <60>;
+		gpmc,cs-wr-off-ns = <60>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <60>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <50>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wr-data-mux-bus-ns = <15>;
+		gpmc,wr-access-ns = <75>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&reg_vcc3>;
+		vdd33a-supply = <&reg_vcc3>;
+		reg-io-width = <4>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 0x2>;
+		reg = <7 0 0xff>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		phy-mode = "mii";
+	};
+};
diff --git a/src/arm/omap3-lilly-dbb056.dts b/src/arm/omap3-lilly-dbb056.dts
new file mode 100644
index 000000000000..834f7c65f62d
--- /dev/null
+++ b/src/arm/omap3-lilly-dbb056.dts
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+/dts-v1/;
+
+#include "omap3-lilly-a83x.dtsi"
+
+/ {
+	model = "INCOstartec LILLY-DBB056 (DM3730)";
+	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
+};
+
+&twl {
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl4030-vaux2";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	lan9117_pins: pinmux_lan9117_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)   /* cam_fld.gpio_98 */
+		>;
+	};
+
+	gpio4_pins: pinmux_gpio4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)   /* cam_xclkb.gpio_111 -> sja1000 IRQ */
+		>;
+	};
+
+	gpio5_pins: pinmux_gpio5_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcbsp1_clk.gpio_156 -> enable DSS */
+		>;
+	};
+
+	lcd_pins: pinmux_lcd_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)    /* sdmmc2_dat7.sdmmc2_clkin */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_cts_rctx.gpio_163 -> wp */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_rts_sd.gpio_164 -> cd */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)   /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)   /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)   /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio4_pins>;
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio5_pins>;
+};
+
+&mmc2 {
+	status = "okay";
+	bus-width = <4>;
+	vmmc-supply = <&vmmc1>;
+	cd-gpios = <&gpio6 4 0>;   /* gpio_164 */
+	wp-gpios = <&gpio6 3 0>;   /* gpio_163 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	ti,dual-volt;
+};
+
+&mcspi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,   /* nand assigned by COM a83x */
+		<4 0 0x20000000 0x01000000>,
+		<7 0 0x15000000 0x01000000>;   /* eth assigend by COM a83x */
+
+	ethernet@4,0 {
+		compatible = "smsc,lan9117", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <65>;
+		gpmc,cs-wr-off-ns = <65>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <65>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <65>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <60>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wr-data-mux-bus-ns = <15>;
+		gpmc,wr-access-ns = <75>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&reg_vcc3>;
+		vdd33a-supply = <&reg_vcc3>;
+		reg-io-width = <4>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <2 0x2>;
+		reg = <4 0 0xff>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9117_pins>;
+		phy-mode = "mii";
+		smsc,force-internal-phy;
+	};
+};
diff --git a/src/arm/omap3-overo-alto35-common.dtsi b/src/arm/omap3-overo-alto35-common.dtsi
new file mode 100644
index 000000000000..7aae8fb82c1f
--- /dev/null
+++ b/src/arm/omap3-overo-alto35-common.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		gpio148 {
+			label = "overo:red:gpio148";
+			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
+		};
+		gpio150 {
+			label = "overo:yellow:gpio150";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
+		};
+		gpio151 {
+			label = "overo:blue:gpio151";
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
+		};
+		gpio170 {
+			label = "overo:green:gpio170";
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		button0@10 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&omap3_pmx_core {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4)	/* uart1_tx.gpio_148 */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)	/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_OUTPUT | MUX_MODE4)	/* uart1_rx.gpio_151 */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4)		/* sys_clkout1.gpio_10 */
+		>;
+	};
+};
+
+&usbhshost {
+	status = "disabled";
+};
+
diff --git a/src/arm/omap3-overo-alto35.dts b/src/arm/omap3-overo-alto35.dts
new file mode 100644
index 000000000000..a3249eb7501d
--- /dev/null
+++ b/src/arm/omap3-overo-alto35.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Alto35";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/src/arm/omap3-overo-base.dtsi b/src/arm/omap3-overo-base.dtsi
new file mode 100644
index 000000000000..d36bf0250a05
--- /dev/null
+++ b/src/arm/omap3-overo-base.dtsi
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		overo {
+			label = "overo:blue:COM";
+			pwms = <&twl_pwmled 1 7812500>;
+			max-brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "overo";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio6 8 0>;				/* gpio_168: vbus enable */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;	/* gpio_183 */
+		vcc-supply = <&hsusb2_power>;
+	};
+
+	/* Regulator to trigger the nPoweron signal of the Wifi module */
+	w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-npoweron";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;		/* gpio_54: nPoweron */
+		enable-active-high;
+	};
+
+	/* Regulator to trigger the nReset signal of the Wifi module */
+	w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
+		pinctrl-names = "default";
+		pinctrl-0 = <&w3cbw003c_pins &w3cbw003c_2_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-wifi-nreset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;		/* gpio_16: WiFi nReset */
+		startup-delay-us = <10000>;
+	};
+
+	/* Regulator to trigger the nReset signal of the Bluetooth module */
+	w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-bt-nreset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;		/* gpio_164: BT nReset */
+		startup-delay-us = <10000>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	/* WiFi/BT combo */
+	w3cbw003c_pins: pinmux_w3cbw003c_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)		/* gpmc_ncs3.gpio_54 */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)		/* i2c2_scl.gpio_168 */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_OUTPUT | MUX_MODE4)		/* i2c2_sda.gpio_183 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+	status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&w3cbw003c_npoweron>;
+	vqmmc-supply = <&w3cbw003c_bt_nreset>;
+	vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
+	bus-width = <4>;
+	cap-sdio-irq;
+	non-removable;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
diff --git a/src/arm/omap3-overo-chestnut43-common.dtsi b/src/arm/omap3-overo-chestnut43-common.dtsi
new file mode 100644
index 000000000000..17b82f82638a
--- /dev/null
+++ b/src/arm/omap3-overo-chestnut43-common.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
+
+	ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
+
diff --git a/src/arm/omap3-overo-chestnut43.dts b/src/arm/omap3-overo-chestnut43.dts
new file mode 100644
index 000000000000..fe0824aca3c0
--- /dev/null
+++ b/src/arm/omap3-overo-chestnut43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Chestnut43";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-common-dvi.dtsi b/src/arm/omap3-overo-common-dvi.dtsi
new file mode 100644
index 000000000000..802f704f67e5
--- /dev/null
+++ b/src/arm/omap3-overo-common-dvi.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * DVI output for some Gumstix Overo boards (Tobi and Summit)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &dvi0;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
diff --git a/src/arm/omap3-overo-common-lcd35.dtsi b/src/arm/omap3-overo-common-lcd35.dtsi
new file mode 100644
index 000000000000..233c69e50ae3
--- /dev/null
+++ b/src/arm/omap3-overo-common-lcd35.dtsi
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lb035_pins: pinmux_lb035_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
+
+		default-on;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	lcd0: display@0 {
+		compatible = "lgphilips,lb035q02";
+		label = "lcd";
+
+		reg = <1>;					/* CS1 */
+		spi-max-frequency = <10000000>;
+		spi-cpol;
+		spi-cpha;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lb035_pins>;
+		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;	/* gpio_144 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 0>;			/* gpio_114 */
+		pendown-gpio = <&gpio4 18 0>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		linux,wakeup;
+	};
+};
diff --git a/src/arm/omap3-overo-common-lcd43.dtsi b/src/arm/omap3-overo-common-lcd43.dtsi
new file mode 100644
index 000000000000..f5395b7da912
--- /dev/null
+++ b/src/arm/omap3-overo-common-lcd43.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lte430_pins: pinmux_lte430_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	lcd0: display@0 {
+		compatible = "samsung,lte430wq-f0c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lte430_pins>;
+		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;		/* gpio_144 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9200000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
+
+		default-on;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 0>;			/* gpio_114 */
+		pendown-gpio = <&gpio4 18 0>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		linux,wakeup;
+	};
+};
+
diff --git a/src/arm/omap3-overo-common-peripherals.dtsi b/src/arm/omap3-overo-common-peripherals.dtsi
new file mode 100644
index 000000000000..5831bcc52966
--- /dev/null
+++ b/src/arm/omap3-overo-common-peripherals.dtsi
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
+ */
+
+/ {
+	lis33_3v3: lis33-3v3-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "lis33-3v3-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lis33_1v8: lis33-1v8-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "lis33-1v8-reg";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&omap3_pmx_core {
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+
+	/* optional 1K EEPROM with revision information */
+	eeprom@51 {
+		compatible = "atmel,24c01";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+
+	lis33de: lis33de@1d {
+		compatible = "st,lis33de", "st,lis3lv02d";
+		reg = <0x1d>;
+		Vdd-supply = <&lis33_1v8>;
+		Vdd_IO-supply = <&lis33_3v3>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
diff --git a/src/arm/omap3-overo-gallop43-common.dtsi b/src/arm/omap3-overo-gallop43-common.dtsi
new file mode 100644
index 000000000000..49d2254a99b0
--- /dev/null
+++ b/src/arm/omap3-overo-gallop43-common.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&usbhshost {
+	status = "disabled";
+};
+
diff --git a/src/arm/omap3-overo-gallop43.dts b/src/arm/omap3-overo-gallop43.dts
new file mode 100644
index 000000000000..241f5c1914e0
--- /dev/null
+++ b/src/arm/omap3-overo-gallop43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Gallop43";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-palo43-common.dtsi b/src/arm/omap3-overo-palo43-common.dtsi
new file mode 100644
index 000000000000..087aedf5b902
--- /dev/null
+++ b/src/arm/omap3-overo-palo43-common.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
diff --git a/src/arm/omap3-overo-palo43.dts b/src/arm/omap3-overo-palo43.dts
new file mode 100644
index 000000000000..cedb103b4b66
--- /dev/null
+++ b/src/arm/omap3-overo-palo43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Palo43";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-storm-alto35.dts b/src/arm/omap3-overo-storm-alto35.dts
new file mode 100644
index 000000000000..e9cae52afc25
--- /dev/null
+++ b/src/arm/omap3-overo-storm-alto35.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
diff --git a/src/arm/omap3-overo-storm-chestnut43.dts b/src/arm/omap3-overo-storm-chestnut43.dts
new file mode 100644
index 000000000000..7d82fdfd9909
--- /dev/null
+++ b/src/arm/omap3-overo-storm-chestnut43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-storm-gallop43.dts b/src/arm/omap3-overo-storm-gallop43.dts
new file mode 100644
index 000000000000..a1b57e0cf37f
--- /dev/null
+++ b/src/arm/omap3-overo-storm-gallop43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-storm-palo43.dts b/src/arm/omap3-overo-storm-palo43.dts
new file mode 100644
index 000000000000..b585d8fbc347
--- /dev/null
+++ b/src/arm/omap3-overo-storm-palo43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-storm-summit.dts b/src/arm/omap3-overo-storm-summit.dts
new file mode 100644
index 000000000000..a0d7fd8369d7
--- /dev/null
+++ b/src/arm/omap3-overo-storm-summit.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-storm.dtsi b/src/arm/omap3-overo-storm.dtsi
new file mode 100644
index 000000000000..6cb418b4124a
--- /dev/null
+++ b/src/arm/omap3-overo-storm.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-base.dtsi"
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-summit-common.dtsi b/src/arm/omap3-overo-summit-common.dtsi
new file mode 100644
index 000000000000..0ac97ba98549
--- /dev/null
+++ b/src/arm/omap3-overo-summit-common.dtsi
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
+
diff --git a/src/arm/omap3-overo-summit.dts b/src/arm/omap3-overo-summit.dts
new file mode 100644
index 000000000000..69765609455a
--- /dev/null
+++ b/src/arm/omap3-overo-summit.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Summit";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi b/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi
new file mode 100644
index 000000000000..f4b1a61853e3
--- /dev/null
+++ b/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -0,0 +1,71 @@
+/*
+ * Common file for omap dpi panels with QVGA and reset pins
+ *
+ * Note that the board specifc DTS file needs to specify
+ * at minimum the GPIO enable-gpios for display, and
+ * gpios for gpio-backlight.
+ */
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	backlight0: backlight {
+		compatible = "gpio-backlight";
+		default-on;
+	};
+
+	/* 3.3V GPIO controlled regulator for LCD_ENVDD */
+	lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	lcd0: display {
+		compatible = "sharp,ls037v7dw01";
+		label = "lcd";
+		power-supply = <&lcd_3v3>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <18>;
+		};
+	};
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		reg = <0>;			/* CS0 */
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <1000000>;
+		vcc-supply = <&lcd_3v3>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <8000>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4800>;
+		ti,x-plate-ohms = /bits/ 16 <40>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,swap-xy;
+		linux,wakeup;
+	};
+};
diff --git a/src/arm/omap3-sbc-t3517.dts b/src/arm/omap3-sbc-t3517.dts
new file mode 100644
index 000000000000..42189b65d393
--- /dev/null
+++ b/src/arm/omap3-sbc-t3517.dts
@@ -0,0 +1,56 @@
+/*
+ * Suppport for CompuLab SBC-T3517 with CM-T3517
+ */
+
+#include "omap3-cm-t3517.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3517 with CM-T3517";
+	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
+	vddvario: regulator-vddvario-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&sb_t35_usb_hub_pins
+			&usb_hub_pins
+		    >;
+
+	mmc1_aux_pins: pinmux_mmc1_aux_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
+		>;
+	};
+
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc1_pins
+		&mmc1_aux_pins
+	>;
+
+	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
+	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+};
diff --git a/src/arm/omap3-sbc-t3530.dts b/src/arm/omap3-sbc-t3530.dts
new file mode 100644
index 000000000000..bbbeea6b1988
--- /dev/null
+++ b/src/arm/omap3-sbc-t3530.dts
@@ -0,0 +1,36 @@
+/*
+ * Suppport for CompuLab SBC-T3530 with CM-T3530
+ */
+
+#include "omap3-cm-t3530.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3530 with CM-T3530";
+	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sb_t35_usb_hub_pins>;
+
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
+		>;
+	};
+};
+
+/*
+ * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
+ * SB-T35 baseboard respectively.
+ * This setting includes both chips in SBC-T3530 board device tree.
+ */
+&gpmc {
+	ranges = <5 0 0x2c000000 0x01000000>,
+		 <4 0 0x2d000000 0x01000000>;
+};
+
+&mmc1 {
+	cd-gpios =  <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
+};
diff --git a/src/arm/omap4-duovero-parlor.dts b/src/arm/omap4-duovero-parlor.dts
new file mode 100644
index 000000000000..6dc84d9f9b4c
--- /dev/null
+++ b/src/arm/omap4-duovero-parlor.dts
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4-duovero.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "OMAP4430 Gumstix Duovero on Parlor";
+	compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "duovero:blue:led0";
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;	/* gpio_122 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@121 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
+			gpio-key,wakeup;
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "d";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio_63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-0 = <
+			&led_pins
+			&button_pins
+			&smsc_pins
+	>;
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* abe_dmic_din2.gpio_121 */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	smsc_pins: pinmux_smsc_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3)		/* gpmc_a20.gpio_44: IRQ */
+			OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a21.gpio_45: nReset */
+			OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enabled */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <100000>;
+
+	/* optional 1K EEPROM with revision information */
+	eeprom@51 {
+		compatible = "atmel,24c01";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x1000000>;			/* CS5 */
+
+	ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
+
+		phy-mode = "mii";
+
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <50>;
+		gpmc,cs-wr-off-ns = <50>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <50>;
+		gpmc,we-on-ns = <15>;
+		gpmc,we-off-ns = <50>;
+		gpmc,rd-cycle-ns = <50>;
+		gpmc,wr-cycle-ns = <50>;
+		gpmc,access-ns = <50>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <35>;
+		gpmc,cycle2cycle-delay-ns = <35>;
+		gpmc,wr-data-mux-bus-ns = <35>;
+		gpmc,wr-access-ns = <50>;
+
+		gpmc,mux-add-data = <2>;
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,sync-clk-ps = <20000>;
+	};
+};
+
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+		};
+	};
+};
+
diff --git a/src/arm/omap4-duovero.dtsi b/src/arm/omap4-duovero.dtsi
new file mode 100644
index 000000000000..e860ccd9d09c
--- /dev/null
+++ b/src/arm/omap4-duovero.dtsi
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap443x.dtsi"
+
+/ {
+	model = "Gumstix Duovero";
+	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "DuoVero";
+
+		ti,mclk-freq = <38400000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias";
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;	/* gpio_62 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1phy_pins>;
+
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	/* regulator for w2cbw0015 on sdio5 */
+	w2cbw0015_vmmc: w2cbw0015_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&w2cbw0015_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "w2cbw0015";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;		/* gpio_43 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6040_pins
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_nxt.gpio_160 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	hsusb1phy_pins: pinmux_hsusb1phy_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_wait1.gpio_62 */
+		>;
+	};
+
+	w2cbw0015_pins: pinmux_w2cbw0015_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
+			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_dat0 */
+			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc5_pins: pinmux_mmc5_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3 */
+		>;
+	};
+};
+
+/* PMIC */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_2N cascaded to gic */
+		interrupt-parent = <&gic>;
+		ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>;		/* gpio_160 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+/* on-board bluetooth / WiFi module */
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	vmmc-supply = <&vmmc>;
+	ti,bus-width = <4>;
+	ti,non-removable;		/* FIXME: use PMIC_MMC detect */
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+/* mmc3 is available to the expansion board */
+
+&mmc4 {
+	status = "disabled";
+};
+
+/* on-board WiFi module */
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc5_pins>;
+
+	vmmc-supply = <&w2cbw0015_vmmc>;
+	ti,bus-width = <4>;
+	ti,non-removable;
+	cap-power-off-card;
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
diff --git a/src/arm/omap4-var-dvk-om44.dts b/src/arm/omap4-var-dvk-om44.dts
new file mode 100644
index 000000000000..458d79fa378b
--- /dev/null
+++ b/src/arm/omap4-var-dvk-om44.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4-var-som-om44.dtsi"
+#include "omap4-var-som-om44-wlan.dtsi"
+#include "omap4-var-om44customboard.dtsi"
+
+/ {
+	model = "Variscite VAR-DVK-OM44";
+	compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
+	lcd0: display {
+		compatible = "innolux,at070tn83", "panel-dpi";
+		label = "lcd";
+		panel-timing {
+			clock-frequency = <33333333>;
+
+			hback-porch = <40>;
+			hactive = <800>;
+			hfront-porch = <40>;
+			hsync-len = <48>;
+
+			vback-porch = <29>;
+			vactive = <480>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+
+		gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "okay";
+	vdd-supply = <&vcxio>;
+};
diff --git a/src/arm/omap4-var-om44customboard.dtsi b/src/arm/omap4-var-om44customboard.dtsi
new file mode 100644
index 000000000000..f2d2fdb75628
--- /dev/null
+++ b/src/arm/omap4-var-om44customboard.dtsi
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_led_pins>;
+
+		led0 {
+			label = "var:green:led0";
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "var:green:led1";
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-key@184 {
+			label = "user";
+			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
+			linux,code = <BTN_EXTRA>;
+			gpio-key,wakeup;
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_pins>;
+		label = "hdmi";
+		type = "a";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi1_cs2.uart1_cts */
+			OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1)		/* mcspi1_cs3.uart1_rts */
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1)	/* i2c2_scl.uart1_rx */
+			OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1)		/* i2c2_sda.uart1_tx */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	mcasp_pins: pinmux_mcsasp_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2)		/*  mcbsp2_dr.abe_mcasp_axr */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data11 */
+			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)		/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data3 */
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data0 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc5_pins: pinmux_mmc5_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3)		/* abe_mcbsp2_clkx.gpio_110 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+
+	gpio_led_pins: pinmux_gpio_led_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3)		/* kpd_col4.gpio_172 */
+			OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)		/* kpd_col5.gpio_173 */
+		>;
+	};
+
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3)		/* sys_boot0.gpio_184 */
+		>;
+	};
+
+	ks8851_irq_pins: pinmux_ks8851_irq_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3)	/* kpd_col3.gpio_171 */
+		>;
+	};
+
+	hdmi_hpd_pins: pinmux_hdmi_hpd_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
+		>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+	status = "okay";
+
+	eth@0 {
+		compatible = "ks8851";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ks8851_irq_pins>;
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */
+	};
+};
+
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc5_pins>;
+	vmmc-supply = <&vbat>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */
+	status = "okay";
+};
+
+&dss {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+		};
+	};
+};
diff --git a/src/arm/omap4-var-som-om44-wlan.dtsi b/src/arm/omap4-var-som-om44-wlan.dtsi
new file mode 100644
index 000000000000..cc66af419236
--- /dev/null
+++ b/src/arm/omap4-var-som-om44-wlan.dtsi
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	/* regulator for wl12xx on sdio4 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_ctrl_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 0>;	/* gpio 43 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&omap4_pmx_core {
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a17.gpio_41 (WLAN_IRQ) */
+			OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a18.gpio_42 (BT_EN) */
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 (WLAN_EN) */
+		>;
+	};
+
+	mmc4_pins: pinmux_mmc4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_clk.sdmmc4_clk */
+			OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_simo.sdmmc4_cmd */
+			OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_somi.sdmmc4_dat0 */
+			OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_tx.sdmmc4_dat1 */
+			OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_rx.sdmmc4_dat2 */
+			OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_cs0.sdmmc4_dat3 */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&mmc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc4_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	status = "okay";
+};
diff --git a/src/arm/omap4-var-som-om44.dtsi b/src/arm/omap4-var-som-om44.dtsi
new file mode 100644
index 000000000000..062701e1a898
--- /dev/null
+++ b/src/arm/omap4-var-som-om44.dtsi
@@ -0,0 +1,343 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "omap4460.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-OM44";
+	compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	sound: sound@0 {
+		compatible = "ti,abe-twl6040";
+		ti,model = "VAR-SOM-OM44";
+
+		ti,mclk-freq = <38400000>;
+		ti,mcpdm = <&mcpdm>;
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&hsusbb1_phy_clk_pins
+			&hsusbb1_phy_rst_pins
+		>;
+
+		reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
+		vcc-supply = <&vbat>;
+
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	vbat: fixedregulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3)		/* fref_clk2_out.gpio_182 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs4.gpio_101 (irq) */
+			OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3)		/* gpmc_ncs5.gpio_102 (rst) */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3)		/* kpd_row2.gpio_177 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb1_hub_rst_pins
+		&lan7500_rst_pins
+	>;
+
+	hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0)	/* fref_clk3_out */
+		>;
+	};
+
+	hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk1 */
+		>;
+	};
+
+	lan7500_rst_pins: pinmux_lan7500_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk0 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+		interrupt-parent = <&gic>;
+		ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&vusim {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	touchscreen: tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */
+		status = "disabled";
+	};
+
+	tmp105@49 {
+		compatible = "ti,tmp105";
+		reg = <0x49>;
+	};
+
+	eeprom@50 {
+		compatible = "microchip,24c32";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&gpmc {
+	status = "disabled";
+};
+
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	ti,non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&keypad {
+	status = "disabled";
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
diff --git a/src/arm/omap4-var-stk-om44.dts b/src/arm/omap4-var-stk-om44.dts
new file mode 100644
index 000000000000..56b64e618608
--- /dev/null
+++ b/src/arm/omap4-var-stk-om44.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4-var-som-om44.dtsi"
+#include "omap4-var-som-om44-wlan.dtsi"
+#include "omap4-var-om44customboard.dtsi"
+
+/ {
+	model = "Variscite VAR-STK-OM44";
+	compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+};
diff --git a/src/arm/omap5-cm-t54.dts b/src/arm/omap5-cm-t54.dts
new file mode 100644
index 000000000000..b8698ca68647
--- /dev/null
+++ b/src/arm/omap5-cm-t54.dts
@@ -0,0 +1,413 @@
+/*
+ * Support for CompuLab CM-T54
+ */
+/dts-v1/;
+
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "CompuLab CM-T54";
+	compatible = "compulab,omap5-cm-t54", "ti,omap5";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x7F000000>; /* 2048 MB */
+	};
+
+	vmmcsd_fixed: fixed-regulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_pdn_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ldo2_reg>;
+		gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>;   /* gpio4_109 */
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	vwlan_fixed: fixed-regulator-vwlan {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vwlan_pdn_fixed>;
+		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;   /* gpio4_110 */
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "Heartbeat";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&led_gpio_pins
+			&usbhost_pins
+	>;
+
+	led_gpio_pins: pinmux_led_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
+			OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
+			OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
+			OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
+			OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
+			OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
+			OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
+			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
+			OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
+			OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
+			OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
+			OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
+			OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
+			OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
+			OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
+			OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+		>;
+	};
+
+	wlan_gpios_pins: pinmux_wlan_gpios_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */
+			OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_strobe */
+			OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_data */
+
+			OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_strobe */
+			OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_data */
+
+			OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
+			OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&ldo9_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc3_pins
+		&wlan_gpios_pins
+	>;
+	vmmc-supply = <&vwlan_fixed>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+		interrupt-parent = <&gic>;
+		reg = <0x48>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,system-power-controller;
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+		};
+
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+		};
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-name = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					ti,smps-range = <0x80>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out2_reg: smps10_out2 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out2";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_3V3_WLAN */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					startup-delay-us = <1000>;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VCC_1V5_AUD */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
+				};
+
+				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
diff --git a/src/arm/omap5-sbc-t54.dts b/src/arm/omap5-sbc-t54.dts
new file mode 100644
index 000000000000..aa98fea3f2b3
--- /dev/null
+++ b/src/arm/omap5-sbc-t54.dts
@@ -0,0 +1,51 @@
+/*
+ * Suppport for CompuLab SBC-T54 with CM-T54
+ */
+
+#include "omap5-cm-t54.dts"
+
+/ {
+	model = "CompuLab SBC-T54 with CM-T54";
+	compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
+};
+
+&omap5_pmx_core {
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+			OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+		>;
+	};
+
+	mmc1_aux_pins: pinmux_mmc1_aux_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */
+			OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc1_pins
+		&mmc1_aux_pins
+	>;
+	cd-inverted;
+	wp-inverted;
+	cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */
+	wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
diff --git a/src/arm/orion5x-lacie-d2-network.dts b/src/arm/orion5x-lacie-d2-network.dts
new file mode 100644
index 000000000000..c701e8d16bbb
--- /dev/null
+++ b/src/arm/orion5x-lacie-d2-network.dts
@@ -0,0 +1,236 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "LaCie d2 Network";
+	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		front_button {
+			label = "Front Push Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rocker_sw_on {
+			label = "Power rocker switch (on|auto)";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rocker_sw_off {
+			label = "Power rocker switch (auto|off)";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+                #address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full512Kb";
+			reg = <0 0x80000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372b";
+		reg = <0x32>;
+	};
+
+	fan@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+
+		/* Not enough HW info */
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
+	pinctrl-names = "default";
+
+	pmx_board_id: pmx-board-id {
+		marvell,pins = "mpp0", "mpp1", "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp8", "mpp9", "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_fail: pmx-fan-fail {
+		marvell,pins = "mpp5";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP6: Red front LED
+	 * MPP16: Blue front LED blink control
+	 */
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp6", "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_led_active: pmx-sata0-led-active {
+		marvell,pins = "mpp14";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata0_power: pmx-sata0-power {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_led_active: pmx-sata1-led-active {
+		marvell,pins = "mpp15";
+		marvell,function = "sata1";
+	};
+
+	pmx_sata1_power: pmx-sata1-power {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * Non MPP GPIOs:
+	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+	 *  GPIO 23: Blue front LED off
+	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+	 */
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0_led_active
+		     &pmx_sata1_led_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/orion5x-maxtor-shared-storage-2.dts b/src/arm/orion5x-maxtor-shared-storage-2.dts
new file mode 100644
index 000000000000..ff3484904294
--- /dev/null
+++ b/src/arm/orion5x-maxtor-shared-storage-2.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Maxtor Shared Storage II";
+	compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+                #address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+		pinctrl-0 = <&pmx_rtc>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_leds &pmx_misc>;
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp11", "mpp12";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP0: Power LED
+	 * MPP1: Error LED
+	 */
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP4: HDD ind. (Single/Dual)
+	 * MPP5: HD0 5V control
+	 * MPP6: HD0 12V control
+	 * MPP7: HD1 5V control
+	 * MPP8: HD1 12V control
+	 */
+	pmx_misc: pmx-misc {
+		marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_led_active: pmx-sata0-led-active {
+		marvell,pins = "mpp14";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata1_led_active: pmx-sata1-led-active {
+		marvell,pins = "mpp15";
+		marvell,function = "sata1";
+	};
+
+	/*
+	 * Non MPP GPIOs:
+	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+	 *  GPIO 23: Blue front LED off
+	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+	 */
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0_led_active
+		     &pmx_sata1_led_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/orion5x-mv88f5182.dtsi b/src/arm/orion5x-mv88f5182.dtsi
new file mode 100644
index 000000000000..d1ed71c60209
--- /dev/null
+++ b/src/arm/orion5x-mv88f5182.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				compatible = "marvell,88f5182-pinctrl";
+				reg = <0x10000 0x8>, <0x10050 0x4>;
+
+				pmx_sata0: pmx-sata0 {
+					marvell,pins = "mpp12", "mpp14";
+					marvell,function = "sata0";
+				};
+
+				pmx_sata1: pmx-sata1 {
+					marvell,pins = "mpp13", "mpp15";
+					marvell,function = "sata1";
+				};
+			};
+
+			core_clk: core-clocks@10030 {
+				compatible = "marvell,mv88f5182-core-clock";
+				reg = <0x10010 0x4>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
diff --git a/src/arm/orion5x-rd88f5182-nas.dts b/src/arm/orion5x-rd88f5182-nas.dts
new file mode 100644
index 000000000000..6fb052507b36
--- /dev/null
+++ b/src/arm/orion5x-rd88f5182-nas.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Marvell Reference Design 88F5182 NAS";
+	compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
+			 <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_debug_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "rd88f5182:cpu";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+	};
+};
+
+&devbus_cs1 {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x1000000>;
+		bank-width = <1>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@68 {
+		pinctrl-0 = <&pmx_rtc>;
+		pinctrl-names = "default";
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
+		&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	/*
+	 * MPP[20] PCI Clock to MV88F5182
+	 * MPP[21] PCI Clock to mini PCI CON11
+	 * MPP[22] USB 0 over current indication
+	 * MPP[23] USB 1 over current indication
+	 * MPP[24] USB 1 over current enable
+	 * MPP[25] USB 0 over current enable
+	 */
+
+	pmx_debug_led: pmx-debug_led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_switch: pmx-reset-switch {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_misc_gpios: pmx-misc-gpios {
+		marvell,pins = "mpp4", "mpp5";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/qcom-apq8064-ifc6410.dts b/src/arm/qcom-apq8064-ifc6410.dts
new file mode 100644
index 000000000000..7c2441d526bc
--- /dev/null
+++ b/src/arm/qcom-apq8064-ifc6410.dts
@@ -0,0 +1,16 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm APQ8064/IFC6410";
+	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+
+	soc {
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+			};
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8064-v2.0.dtsi b/src/arm/qcom-apq8064-v2.0.dtsi
new file mode 100644
index 000000000000..935c3945fc5e
--- /dev/null
+++ b/src/arm/qcom-apq8064-v2.0.dtsi
@@ -0,0 +1 @@
+#include "qcom-apq8064.dtsi"
diff --git a/src/arm/qcom-apq8064.dtsi b/src/arm/qcom-apq8064.dtsi
new file mode 100644
index 000000000000..92bf793622c3
--- /dev/null
+++ b/src/arm/qcom-apq8064.dtsi
@@ -0,0 +1,170 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm APQ8064";
+	compatible = "qcom,apq8064";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+		};
+
+		cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc2: clock-controller@20a8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc3: clock-controller@20b8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw2: regulator@20a9000 {
+			compatible = "qcom,saw2";
+			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw3: regulator@20b9000 {
+			compatible = "qcom,saw2";
+			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <0 158 0x0>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-apq8064";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8084-mtp.dts b/src/arm/qcom-apq8084-mtp.dts
new file mode 100644
index 000000000000..9dae3878b71d
--- /dev/null
+++ b/src/arm/qcom-apq8084-mtp.dts
@@ -0,0 +1,6 @@
+#include "qcom-apq8084.dtsi"
+
+/ {
+	model = "Qualcomm APQ 8084-MTP";
+	compatible = "qcom,apq8084-mtp", "qcom,apq8084";
+};
diff --git a/src/arm/qcom-apq8084.dtsi b/src/arm/qcom-apq8084.dtsi
new file mode 100644
index 000000000000..e3e009a5912b
--- /dev/null
+++ b/src/arm/qcom-apq8084.dtsi
@@ -0,0 +1,179 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm APQ 8084";
+	compatible = "qcom,apq8084";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <0>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <1>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <2>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <3>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+		};
+
+		L2: l2-cache {
+			compatible = "qcom,arch-cache";
+			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 7 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 2 0xf08>,
+			     <1 3 0xf08>,
+			     <1 4 0xf08>,
+			     <1 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <0 8 0x4>,
+					     <0 7 0x4>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <0 9 0x4>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <0 10 0x4>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <0 11 0x4>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <0 12 0x4>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <0 13 0x4>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <0 14 0x4>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw_l2: regulator@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: clock-controller@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc1: clock-controller@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc2: clock-controller@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc3: clock-controller@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+	};
+};
diff --git a/src/arm/qcom-msm8660.dtsi b/src/arm/qcom-msm8660.dtsi
new file mode 100644
index 000000000000..53837aaa2f72
--- /dev/null
+++ b/src/arm/qcom-msm8660.dtsi
@@ -0,0 +1,108 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm MSM8660";
+	compatible = "qcom,msm8660";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2080000 {
+			compatible = "qcom,msm-8660-qgic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = < 0x02080000 0x1000 >,
+			      < 0x02081000 0x1000 >;
+		};
+
+		timer@2000000 {
+			compatible = "qcom,scss-timer", "qcom,msm-timer";
+			interrupts = <1 0 0x301>,
+				     <1 1 0x301>,
+				     <1 2 0x301>;
+			reg = <0x02000000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x40000>;
+		};
+
+		msmgpio: gpio@800000 {
+			compatible = "qcom,msm-gpio";
+			reg = <0x00800000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpio = <173>;
+			interrupts = <0 16 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8660";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		gsbi12: gsbi@19c00000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x19c00000 0x100>;
+			clocks = <&gcc GSBI12_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			serial@19c40000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x19c40000 0x1000>,
+				      <0x19c00000 0x1000>;
+				interrupts = <0 195 0x0>;
+				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+	};
+};
diff --git a/src/arm/qcom-msm8960.dtsi b/src/arm/qcom-msm8960.dtsi
new file mode 100644
index 000000000000..5303e53e34dc
--- /dev/null
+++ b/src/arm/qcom-msm8960.dtsi
@@ -0,0 +1,155 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm MSM8960";
+	compatible = "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <1 14 0x304>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+		qcom,no-pc-write;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: gpio@800000 {
+			compatible = "qcom,msm-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpio = <150>;
+			interrupts = <0 16 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8960";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		clock-controller@4000000 {
+			compatible = "qcom,mmcc-msm8960";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <0 154 0x0>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+	};
+};
diff --git a/src/arm/r8a7791-henninger.dts b/src/arm/r8a7791-henninger.dts
new file mode 100644
index 000000000000..3a2ef0a2a137
--- /dev/null
+++ b/src/arm/r8a7791-henninger.dts
@@ -0,0 +1,262 @@
+/*
+ * Device Tree Source for the Henninger board
+ *
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Henninger";
+	compatible = "renesas,henninger", "renesas,r8a7791";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	vcc_sdhi0: regulator@0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator@1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi2: regulator@2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi2: regulator@3 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data_d";
+		renesas,function = "scif0";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2";
+		renesas,function = "i2c2";
+	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	msiof0_pins: spi1 {
+		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+				 "msiof0_tx";
+		renesas,function = "msiof0";
+	};
+
+	usb0_pins: usb0 {
+		renesas,groups = "usb0";
+		renesas,function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "ok";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader_prg";
+			reg = <0x00000000 0x00040000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "user_prg";
+			reg = <0x00040000 0x00400000>;
+			read-only;
+		};
+		partition@440000 {
+			label = "flash_fs";
+			reg = <0x00440000 0x03bc0000>;
+		};
+	};
+};
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie_bus_clk {
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
diff --git a/src/arm/rk3288-evb-act8846.dts b/src/arm/rk3288-evb-act8846.dts
new file mode 100644
index 000000000000..7d59ff4de408
--- /dev/null
+++ b/src/arm/rk3288-evb-act8846.dts
@@ -0,0 +1,134 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
+};
+
+&i2c0 {
+	hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/src/arm/rk3288-evb-rk808.dts b/src/arm/rk3288-evb-rk808.dts
new file mode 100644
index 000000000000..9a88b6c66396
--- /dev/null
+++ b/src/arm/rk3288-evb-rk808.dts
@@ -0,0 +1,18 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
+};
diff --git a/src/arm/rk3288-evb.dtsi b/src/arm/rk3288-evb.dtsi
new file mode 100644
index 000000000000..4f572093c8b4
--- /dev/null
+++ b/src/arm/rk3288-evb.dtsi
@@ -0,0 +1,96 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		reg = <0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button@0 {
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <1>;
+			debounce-interval = <100>;
+		};
+	};
+
+	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
diff --git a/src/arm/rk3288.dtsi b/src/arm/rk3288.dtsi
new file mode 100644
index 000000000000..5950b0a53224
--- /dev/null
+++ b/src/arm/rk3288.dtsi
@@ -0,0 +1,595 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x500>;
+		};
+		cpu@501 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x501>;
+		};
+		cpu@502 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x502>;
+		};
+		cpu@503 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x503>;
+		};
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	i2c1: i2c@ff140000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff140000 0x1000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff150000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff150000 0x1000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff160000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff160000 0x1000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff170000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff170000 0x1000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff180000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff180000 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff190000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff190000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff690000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff690000 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff1b0000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff1b0000 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_xfer>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff1c0000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff1c0000 0x100>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer>;
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff500000 {
+		compatible = "generic-ehci";
+		reg = <0xff500000 0x100>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
+	/* NOTE: ohci@ff520000 doesn't actually work on hardware */
+
+	usb_hsic: usb@ff5c0000 {
+		compatible = "generic-ehci";
+		reg = <0xff5c0000 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HSIC>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff650000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff650000 0x1000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff660000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff660000 0x1000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	pmu: power-management@ff730000 {
+		compatible = "rockchip,rk3288-pmu", "syscon";
+		reg = <0xff730000 0x100>;
+	};
+
+	sgrf: syscon@ff740000 {
+		compatible = "rockchip,rk3288-sgrf", "syscon";
+		reg = <0xff740000 0x1000>;
+	};
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3288-cru";
+		reg = <0xff760000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3288-grf", "syscon";
+		reg = <0xff770000 0x1000>;
+	};
+
+	wdt: watchdog@ff800000 {
+		compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
+		reg = <0xff800000 0x100>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@ffc01000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0xffc01000 0x1000>,
+		      <0xffc02000 0x1000>,
+		      <0xffc04000 0x2000>,
+		      <0xffc06000 0x2000>;
+		interrupts = <GIC_PPI 9 0xf04>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3288-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmu>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@ff750000 {
+			compatible = "rockchip,gpio-bank";
+			reg =	<0xff750000 0x100>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@ff780000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff780000 0x100>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@ff790000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff790000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@ff7a0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7a0000 0x100>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio4@ff7b0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7b0000 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio5@ff7c0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7c0000 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO5>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio6@ff7d0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7d0000 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio7@ff7e0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7e0000 0x100>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO7>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio8@ff7f0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7f0000 0x100>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO8>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
+						<0 16 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>,
+						<8 5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>,
+						<6 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>,
+						<2 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>,
+						<7 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c5 {
+			i2c5_xfer: i2c5-xfer {
+				rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>,
+						<7 20 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdmmc_cd: sdmcc-cd {
+				rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>,
+						<6 17 RK_FUNC_1 &pcfg_pull_up>,
+						<6 18 RK_FUNC_1 &pcfg_pull_up>,
+						<6 19 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_pwr: emmc-pwr {
+				rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
+						<3 1 RK_FUNC_2 &pcfg_pull_up>,
+						<3 2 RK_FUNC_2 &pcfg_pull_up>,
+						<3 3 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
+						<3 1 RK_FUNC_2 &pcfg_pull_up>,
+						<3 2 RK_FUNC_2 &pcfg_pull_up>,
+						<3 3 RK_FUNC_2 &pcfg_pull_up>,
+						<3 4 RK_FUNC_2 &pcfg_pull_up>,
+						<3 5 RK_FUNC_2 &pcfg_pull_up>,
+						<3 6 RK_FUNC_2 &pcfg_pull_up>,
+						<3 7 RK_FUNC_2 &pcfg_pull_up>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,
+						<4 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>,
+						<5 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>,
+						<7 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>,
+						<7 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins = <5 12 3 &pcfg_pull_up>,
+						<5 13 3 &pcfg_pull_none>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins = <5 14 3 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins = <5 15 3 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/src/arm/s5pv210-aquila.dts b/src/arm/s5pv210-aquila.dts
new file mode 100644
index 000000000000..aa31b84a707a
--- /dev/null
+++ b/src/arm/s5pv210-aquila.dts
@@ -0,0 +1,392 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Samsung Aquila board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "Samsung Aquila based on S5PC110";
+	compatible = "samsung,aquila", "samsung,s5pv210";
+
+	aliases {
+		i2c3 = &i2c_pmic;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000
+			0x40000000 0x18000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vtf_reg: fixed-regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "V_TF_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpios = <&mp05 4 0>;
+			enable-active-high;
+		};
+
+		pda_reg: fixed-regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VCC_1.8V_PDA";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			reg = <1>;
+		};
+
+		bat_reg: fixed-regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "V_BAT";
+			regulator-min-microvolt = <3700000>;
+			regulator-max-microvolt = <3700000>;
+			reg = <2>;
+		};
+	};
+
+	i2c_pmic: i2c-pmic {
+		compatible = "i2c-gpio";
+		gpios = <&gpj4 0 0>, /* sda */
+			<&gpj4 3 0>; /* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
+							<&gph0 4 0>;
+			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
+							<1200000>, <1200000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VCC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VCC_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC+VCAM_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_IO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_ISP_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "CAM_A_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_CIF_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "CAM_8M_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VARM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VINT_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vichg_reg: ENVICHG {
+					regulator-name = "VICHG";
+				};
+
+				safeout1_reg: ESAFEOUT1 {
+					regulator-name = "SAFEOUT1";
+					regulator-always-on;
+				};
+
+				safeout2_reg: ESAFEOUT2 {
+					regulator-name = "SAFEOUT2";
+					regulator-boot-on;
+				};
+			};
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gph2 6 1>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	linux,input-wakeup;
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_CONNECT>;
+	};
+
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <2>;
+		linux,code = <KEY_BACK>;
+	};
+
+	key_3 {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+
+	key_4 {
+		keypad,row = <1>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEUP>;
+	};
+
+	key_5 {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key_6 {
+		keypad,row = <2>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+	pinctrl-names = "default";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 1>;
+	vmmc-supply = <&vtf_reg>;
+	cd-inverted;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&onenand {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo3_reg>;
+	vusb_d-supply = <&ldo8_reg>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <0>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <16>;
+			hback-porch = <16>;
+			hsync-len = <2>;
+			vback-porch = <3>;
+			vfront-porch = <28>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&pinctrl0 {
+	t_flash_detect: t-flash-detect {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+	};
+};
diff --git a/src/arm/s5pv210-goni.dts b/src/arm/s5pv210-goni.dts
new file mode 100644
index 000000000000..6387c77a6f7b
--- /dev/null
+++ b/src/arm/s5pv210-goni.dts
@@ -0,0 +1,449 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Samsung Goni board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "Samsung Goni based on S5PC110";
+	compatible = "samsung,goni", "samsung,s5pv210";
+
+	aliases {
+		i2c3 = &i2c_pmic;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000
+			0x40000000 0x10000000
+			0x50000000 0x08000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vtf_reg: fixed-regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "V_TF_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			reg = <0>;
+			gpios = <&mp05 4 0>;
+			enable-active-high;
+		};
+
+		pda_reg: fixed-regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VCC_1.8V_PDA";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			reg = <1>;
+		};
+
+		bat_reg: fixed-regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "V_BAT";
+			regulator-min-microvolt = <3700000>;
+			regulator-max-microvolt = <3700000>;
+			reg = <2>;
+		};
+
+		tsp_reg: fixed-regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "TSP_VDD";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			reg = <3>;
+			gpios = <&gpj1 3 0>;
+			enable-active-high;
+		};
+	};
+
+	i2c_pmic: i2c-pmic {
+		compatible = "i2c-gpio";
+		gpios = <&gpj4 0 0>, /* sda */
+			<&gpj4 3 0>; /* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
+							<&gph0 4 0>;
+			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
+							<1200000>, <1200000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VCC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VLCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC+VCAM_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-boot-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_IO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_ISP_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "CAM_A_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_CIF_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "CAM_8M_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VARM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VINT_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gph2 6 1>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	linux,input-wakeup;
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_CONNECT>;
+	};
+
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <2>;
+		linux,code = <KEY_BACK>;
+	};
+
+	key_3 {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+
+	key_4 {
+		keypad,row = <1>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEUP>;
+	};
+
+	key_5 {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key_6 {
+		keypad,row = <2>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 1>;
+	vmmc-supply = <&vtf_reg>;
+	cd-inverted;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo3_reg>;
+	vusb_d-supply = <&ldo8_reg>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&i2c2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	tsp@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpj0>;
+		interrupts = <5 2>;
+
+		atmel,x-line = <17>;
+		atmel,y-line = <11>;
+		atmel,x-size = <800>;
+		atmel,y-size = <480>;
+		atmel,burst-length = <0x21>;
+		atmel,threshold = <0x28>;
+		atmel,orientation = <1>;
+
+		vdd-supply = <&tsp_reg>;
+	};
+};
+
+&i2c0 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <100000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	noon010pc30: sensor@30 {
+		compatible = "siliconfile,noon010pc30";
+		reg = <0x30>;
+		vddio-supply = <&ldo11_reg>;
+		vdda-supply = <&ldo13_reg>;
+		vdd_core-supply = <&ldo14_reg>;
+
+		clock-frequency = <16000000>;
+		clocks = <&clock_cam 0>;
+		clock-names = "mclk";
+		nreset-gpios = <&gpb 2 0>;
+		nstby-gpios = <&gpb 0 0>;
+
+		port {
+			noon010pc30_ep: endpoint {
+				remote-endpoint = <&fimc0_ep>;
+				bus-width = <8>;
+				hsync-active = <0>;
+				vsync-active = <1>;
+				pclk-sample = <1>;
+			};
+		};
+	};
+};
+
+&camera {
+	pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
+	pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
+	pinctrl-names = "default", "idle";
+
+	parallel-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* camera A input */
+		port@1 {
+			reg = <1>;
+			fimc0_ep: endpoint {
+				remote-endpoint = <&noon010pc30_ep>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				pclk-sample = <0>;
+			};
+		};
+	};
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			/* 480x800@55Hz */
+			clock-frequency = <23439570>;
+			hactive = <480>;
+			hfront-porch = <16>;
+			hback-porch = <16>;
+			hsync-len = <2>;
+			vactive = <800>;
+			vback-porch = <2>;
+			vfront-porch = <28>;
+			vsync-len = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <0>;
+			pixelclk-active = <0>;
+		};
+	};
+};
+
+&onenand {
+	status = "okay";
+};
diff --git a/src/arm/s5pv210-pinctrl.dtsi b/src/arm/s5pv210-pinctrl.dtsi
new file mode 100644
index 000000000000..8c714088e3c6
--- /dev/null
+++ b/src/arm/s5pv210-pinctrl.dtsi
@@ -0,0 +1,839 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpgi: gpgi {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp01: mp01 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp02: mp02 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp03: mp03 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp04: mp04 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp05: mp05 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp06: mp06 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp07: mp07 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&vic0>;
+		interrupts = <0>, <1>, <2>, <3>,
+				<4>, <5>, <6>, <7>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&vic0>;
+		interrupts = <8>, <9>, <10>, <11>,
+				<12>, <13>, <14>, <15>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph2: gph2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart_audio: uart-audio {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
+				"gpi-4", "gpi-5", "gpi-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ac97_bus: ac97-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpd1-4", "gpd1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row0: keypad-row-0 {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row1: keypad-row-1 {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row2: keypad-row-2 {
+		samsung,pins = "gph3-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row3: keypad-row-3 {
+		samsung,pins = "gph3-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row4: keypad-row-4 {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row5: keypad-row-5 {
+		samsung,pins = "gph3-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row6: keypad-row-6 {
+		samsung,pins = "gph3-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row7: keypad-row-7 {
+		samsung,pins = "gph3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col0: keypad-col-0 {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col1: keypad-col-1 {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col2: keypad-col-2 {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col3: keypad-col-3 {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col4: keypad-col-4 {
+		samsung,pins = "gph2-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col5: keypad-col-5 {
+		samsung,pins = "gph2-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col6: keypad-col-6 {
+		samsung,pins = "gph2-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col7: keypad-col-7 {
+		samsung,pins = "gph2-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpg1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpg1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpg1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpg2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpg2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpg2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus8: sd2-bus-width8 {
+		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_clk: sd3-clk {
+		samsung,pins = "gpg3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_cmd: sd3-cmd {
+		samsung,pins = "gpg3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_cd: sd3-cd {
+		samsung,pins = "gpg3-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_bus1: sd3-bus-width1 {
+		samsung,pins = "gpg3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_bus4: sd3-bus-width4 {
+		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	eint0: ext-int0 {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint8: ext-int8 {
+		samsung,pins = "gph1-0";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint15: ext-int15 {
+		samsung,pins = "gph1-7";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint16: ext-int16 {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint31: ext-int31 {
+		samsung,pins = "gph3-7";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_a_io: cam-port-a-io {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_a_clk_active: cam-port-a-clk-active {
+		samsung,pins = "gpe1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_a_clk_idle: cam-port-a-clk-idle {
+		samsung,pins = "gpe1-3";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+		lcd_ctrl: lcd-ctrl {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lcd_sync: lcd-sync {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lcd_clk: lcd-clk {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lcd_data24: lcd-data-width24 {
+		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/src/arm/s5pv210-smdkc110.dts b/src/arm/s5pv210-smdkc110.dts
new file mode 100644
index 000000000000..1eedab7ffe94
--- /dev/null
+++ b/src/arm/s5pv210-smdkc110.dts
@@ -0,0 +1,78 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for YIC System SMDC110 board.
+ *
+ * NOTE: This file is completely based on original board file for mach-smdkc110
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "YIC System SMDKC110 based on S5PC110";
+	compatible = "yic,smdkc110", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	audio-codec@1b {
+		compatible = "wlf,wm8580";
+		reg = <0x1b>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/src/arm/s5pv210-smdkv210.dts b/src/arm/s5pv210-smdkv210.dts
new file mode 100644
index 000000000000..cb8521899ec8
--- /dev/null
+++ b/src/arm/s5pv210-smdkv210.dts
@@ -0,0 +1,238 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for YIC System SMDV210 board.
+ *
+ * NOTE: This file is completely based on original board file for mach-smdkv210
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "YIC System SMDKV210 based on S5PV210";
+	compatible = "yic,smdkv210", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x40000000>;
+	};
+
+	ethernet@18000000 {
+		compatible = "davicom,dm9000";
+		reg = <0xA8000000 0x2 0xA8000002 0x2>;
+		interrupt-parent = <&gph1>;
+		interrupts = <1 4>;
+		local-mac-address = [00 00 de ad be ef];
+		davicom,no-eeprom;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_out>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	linux,input-wakeup;
+	samsung,keypad-num-rows = <8>;
+	samsung,keypad-num-columns = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_row3>, <&keypad_row4>, <&keypad_row5>,
+			<&keypad_row6>, <&keypad_row7>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>,
+			<&keypad_col3>, <&keypad_col4>, <&keypad_col5>,
+			<&keypad_col6>, <&keypad_col7>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <3>;
+		linux,code = <KEY_1>;
+	};
+
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <4>;
+		linux,code = <KEY_2>;
+	};
+
+	key_3 {
+		keypad,row = <0>;
+		keypad,column = <5>;
+		linux,code = <KEY_3>;
+	};
+
+	key_4 {
+		keypad,row = <0>;
+		keypad,column = <6>;
+		linux,code = <KEY_4>;
+	};
+
+	key_5 {
+		keypad,row = <0
+		>;
+		keypad,column = <7>;
+		linux,code = <KEY_5>;
+	};
+
+	key_6 {
+		keypad,row = <1>;
+		keypad,column = <3>;
+		linux,code = <KEY_A>;
+	};
+	key_7 {
+		keypad,row = <1>;
+		keypad,column = <4>;
+		linux,code = <KEY_B>;
+	};
+
+	key_8 {
+		keypad,row = <1>;
+		keypad,column = <5>;
+		linux,code = <KEY_C>;
+	};
+
+	key_9 {
+		keypad,row = <1>;
+		keypad,column = <6>;
+		linux,code = <KEY_D>;
+	};
+
+	key_10 {
+		keypad,row = <1>;
+		keypad,column = <7>;
+		linux,code = <KEY_E>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci3 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hsotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+
+		timing0: timing@0 {
+			/* 800x480@60Hz */
+			clock-frequency = <24373920>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <8>;
+			hback-porch = <13>;
+			hsync-len = <3>;
+			vback-porch = <7>;
+			vfront-porch = <5>;
+			vsync-len = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+};
+
+&pwm {
+	samsung,pwm-outputs = <3>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	audio-codec@1b {
+		compatible = "wlf,wm8580";
+		reg = <0x1b>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/src/arm/s5pv210-torbreck.dts b/src/arm/s5pv210-torbreck.dts
new file mode 100644
index 000000000000..622599fd2cfa
--- /dev/null
+++ b/src/arm/s5pv210-torbreck.dts
@@ -0,0 +1,92 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Torbreck board.
+ *
+ * NOTE: This file is completely based on original board file for mach-torbreck
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "aESOP Torbreck based on S5PV210";
+	compatible = "aesop,torbreck", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci3 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/src/arm/s5pv210.dtsi b/src/arm/s5pv210.dtsi
new file mode 100644
index 000000000000..8344a0ee2b86
--- /dev/null
+++ b/src/arm/s5pv210.dtsi
@@ -0,0 +1,633 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/s5pv210.h>
+#include <dt-bindings/clock/s5pv210-audss.h>
+
+/ {
+	aliases {
+		csis0 = &csis0;
+		fimc0 = &fimc0;
+		fimc1 = &fimc1;
+		fimc2 = &fimc2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2s0 = &i2s0;
+		i2s1 = &i2s1;
+		i2s2 = &i2s2;
+		pinctrl0 = &pinctrl0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		external-clocks {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xxti: oscillator@0 {
+				compatible = "fixed-clock";
+				reg = <0>;
+				clock-frequency = <0>;
+				clock-output-names = "xxti";
+				#clock-cells = <0>;
+			};
+
+			xusbxti: oscillator@1 {
+				compatible = "fixed-clock";
+				reg = <1>;
+				clock-frequency = <0>;
+				clock-output-names = "xusbxti";
+				#clock-cells = <0>;
+			};
+		};
+
+		onenand: onenand@b0000000 {
+			compatible = "samsung,s5pv210-onenand";
+			reg = <0xb0600000 0x2000>,
+				<0xb0000000 0x20000>,
+				<0xb0040000 0x20000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <31>;
+			clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
+			clock-names = "bus", "onenand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		chipid@e0000000 {
+			compatible = "samsung,s5pv210-chipid";
+			reg = <0xe0000000 0x1000>;
+		};
+
+		clocks: clock-controller@e0100000 {
+			compatible = "samsung,s5pv210-clock", "simple-bus";
+			reg = <0xe0100000 0x10000>;
+			clock-names = "xxti", "xusbxti";
+			clocks = <&xxti>, <&xusbxti>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmu_syscon: syscon@e0108000 {
+				compatible = "samsung-s5pv210-pmu", "syscon";
+				reg = <0xe0108000 0x8000>;
+			};
+		};
+
+		pinctrl0: pinctrl@e0200000 {
+			compatible = "samsung,s5pv210-pinctrl";
+			reg = <0xe0200000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <30>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupts = <16>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "arm,amba-bus";
+			ranges;
+
+			pdma0: dma@e0900000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xe0900000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <19>;
+				clocks = <&clocks CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: dma@e0a00000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xe0a00000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <20>;
+				clocks = <&clocks CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		spi0: spi@e1300000 {
+			compatible = "samsung,s5pv210-spi";
+			reg = <0xe1300000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <15>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@e1400000 {
+			compatible = "samsung,s5pv210-spi";
+			reg = <0xe1400000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <16>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		keypad: keypad@e1600000 {
+			compatible = "samsung,s5pv210-keypad";
+			reg = <0xe1600000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <25>;
+			clocks = <&clocks CLK_KEYIF>;
+			clock-names = "keypad";
+			status = "disabled";
+		};
+
+		i2c0: i2c@e1800000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xe1800000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <14>;
+			clocks = <&clocks CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e1a00000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xe1a00000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-0 = <&i2c2_bus>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		audio-subsystem {
+			compatible = "samsung,s5pv210-audss", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clk_audss: clock-controller@eee10000 {
+				compatible = "samsung,s5pv210-audss-clock";
+				reg = <0xeee10000 0x1000>;
+				clock-names = "hclk", "xxti",
+						"fout_epll",
+						"sclk_audio0";
+				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+						<&clocks FOUT_EPLL>,
+						<&clocks SCLK_AUDIO0>;
+				#clock-cells = <1>;
+			};
+
+			i2s0: i2s@eee30000 {
+				compatible = "samsung,s5pv210-i2s";
+				reg = <0xeee30000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <16>;
+				dma-names = "rx", "tx", "tx-sec";
+				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+				clock-names = "iis",
+						"i2s_opclk0",
+						"i2s_opclk1";
+				clocks = <&clk_audss CLK_I2S>,
+						<&clk_audss CLK_I2S>,
+						<&clk_audss CLK_DOUT_AUD_BUS>;
+				samsung,idma-addr = <0xc0010000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2s0_bus>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		i2s1: i2s@e2100000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0xe2100000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <17>;
+			dma-names = "rx", "tx";
+			dmas = <&pdma1 12>, <&pdma1 13>;
+			clock-names = "iis", "i2s_opclk0";
+			clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@e2a00000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0xe2a00000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <18>;
+			dma-names = "rx", "tx";
+			dmas = <&pdma1 14>, <&pdma1 15>;
+			clock-names = "iis", "i2s_opclk0";
+			clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@e2500000 {
+			compatible = "samsung,s5pc100-pwm";
+			reg = <0xe2500000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <21>, <22>, <23>, <24>, <25>;
+			clock-names = "timers";
+			clocks = <&clocks CLK_PWM>;
+			#pwm-cells = <3>;
+		};
+
+		watchdog: watchdog@e2700000 {
+			compatible = "samsung,s3c2410-wdt";
+			reg = <0xe2700000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+			clock-names = "watchdog";
+			clocks = <&clocks CLK_WDT>;
+		};
+
+		rtc: rtc@e2800000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0xe2800000 0x100>;
+			interrupt-parent = <&vic0>;
+			interrupts = <28>, <29>;
+			clocks = <&clocks CLK_RTC>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		uart0: serial@e2900000 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900000 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <10>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>,
+					<&clocks SCLK_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@e2900400 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900400 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <11>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>,
+					<&clocks SCLK_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@e2900800 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900800 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <12>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>,
+					<&clocks SCLK_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@e2900c00 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900c00 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <13>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>,
+					<&clocks SCLK_UART3>;
+			status = "disabled";
+		};
+
+		sdhci0: sdhci@eb000000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb000000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <26>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>,
+					<&clocks SCLK_MMC0>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@eb100000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb100000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>,
+					<&clocks SCLK_MMC1>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@eb200000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb200000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <28>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>,
+					<&clocks SCLK_MMC2>;
+			status = "disabled";
+		};
+
+		sdhci3: sdhci@eb300000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb300000 0x100000>;
+			interrupt-parent = <&vic3>;
+			interrupts = <2>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3";
+			clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>,
+					<&clocks SCLK_MMC3>;
+			status = "disabled";
+		};
+
+		hsotg: hsotg@ec000000 {
+			compatible = "samsung,s3c6400-hsotg";
+			reg = <0xec000000 0x20000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clocks = <&clocks CLK_USB_OTG>;
+			clock-names = "otg";
+			phy-names = "usb2-phy";
+			phys = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: usbphy@ec100000 {
+			compatible = "samsung,s5pv210-usb2-phy";
+			reg = <0xec100000 0x100>;
+			samsung,pmureg-phandle = <&pmu_syscon>;
+			clocks = <&clocks CLK_USB_OTG>, <&xusbxti>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ehci: ehci@ec200000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0xec200000 0x100>;
+			interrupts = <23>;
+			interrupt-parent = <&vic1>;
+			clocks = <&clocks CLK_USB_HOST>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				phys = <&usbphy 1>;
+			};
+		};
+
+		ohci: ohci@ec300000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0xec300000 0x100>;
+			interrupts = <23>;
+			clocks = <&clocks CLK_USB_HOST>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				phys = <&usbphy 1>;
+			};
+		};
+
+		mfc: codec@f1700000 {
+			compatible = "samsung,mfc-v5";
+			reg = <0xf1700000 0x10000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <14>;
+			clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>;
+			clock-names = "sclk_mfc", "mfc";
+		};
+
+		vic0: interrupt-controller@f2000000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@f2100000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic2: interrupt-controller@f2200000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2200000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic3: interrupt-controller@f2300000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2300000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fimd: fimd@f8000000 {
+			compatible = "samsung,exynos4210-fimd";
+			interrupt-parent = <&vic2>;
+			reg = <0xf8000000 0x20000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <0>, <1>, <2>;
+			clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>;
+			clock-names = "sclk_fimd", "fimd";
+			status = "disabled";
+		};
+
+		g2d: g2d@fa000000 {
+			compatible = "samsung,s5pv210-g2d";
+			reg = <0xfa000000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <9>;
+			clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>;
+			clock-names = "sclk_fimg2d", "fimg2d";
+		};
+
+		mdma1: mdma@fa200000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xfa200000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <18>;
+			clocks = <&clocks CLK_MDMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		i2c1: i2c@fab00000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xfab00000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <13>;
+			clocks = <&clocks CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		camera: camera {
+			compatible = "samsung,fimc", "simple-bus";
+			pinctrl-names = "default";
+			pinctrl-0 = <>;
+			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
+			clock-names = "sclk_cam0", "sclk_cam1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clock_cam: clock-controller {
+				#clock-cells = <1>;
+			};
+
+			csis0: csis@fa600000 {
+				compatible = "samsung,s5pv210-csis";
+				reg = <0xfa600000 0x4000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <29>;
+				clocks = <&clocks CLK_CSIS>,
+						<&clocks SCLK_CSIS>;
+				clock-names = "clk_csis",
+						"sclk_csis";
+				bus-width = <4>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			fimc0: fimc@fb200000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb200000 0x1000>;
+				interrupts = <5>;
+				interrupt-parent = <&vic2>;
+				clocks = <&clocks CLK_FIMC0>,
+						<&clocks SCLK_FIMC0>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,mainscaler-ext;
+				samsung,cam-if;
+			};
+
+			fimc1: fimc@fb300000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb300000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <6>;
+				clocks = <&clocks CLK_FIMC1>,
+						<&clocks SCLK_FIMC1>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,mainscaler-ext;
+				samsung,cam-if;
+			};
+
+			fimc2: fimc@fb400000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb400000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <7>;
+				clocks = <&clocks CLK_FIMC2>,
+						<&clocks SCLK_FIMC2>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,mainscaler-ext;
+				samsung,lcd-wb;
+			};
+		};
+	};
+};
+
+#include "s5pv210-pinctrl.dtsi"
diff --git a/src/arm/socfpga_cyclone5_socrates.dts b/src/arm/socfpga_cyclone5_socrates.dts
new file mode 100644
index 000000000000..a1814b457450
--- /dev/null
+++ b/src/arm/socfpga_cyclone5_socrates.dts
@@ -0,0 +1,50 @@
+/*
+ *  Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "EBV SOCrates";
+	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "stm,m41t82";
+		reg = <0x68>;
+	};
+};
+
+&mmc {
+	status = "okay";
+};
diff --git a/src/arm/ste-href-ab8500.dtsi b/src/arm/ste-href-ab8500.dtsi
new file mode 100644
index 000000000000..30f8601da323
--- /dev/null
+++ b/src/arm/ste-href-ab8500.dtsi
@@ -0,0 +1,428 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8500 {
+				ab8500-gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio4_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio12_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio16_default_mode>,
+						    <&gpio24_default_mode>,
+						    <&gpio25_default_mode>,
+						    <&gpio36_default_mode>,
+						    <&gpio37_default_mode>,
+						    <&gpio38_default_mode>,
+						    <&gpio39_default_mode>,
+						    <&gpio42_default_mode>,
+						    <&gpio26_default_mode>,
+						    <&gpio35_default_mode>,
+						    <&ycbcr_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi1_default_mode>,
+						    <&usbuicc_default_mode>,
+						    <&dmic_default_mode>,
+						    <&extcpena_default_mode>,
+						    <&modsclsda_default_mode>;
+
+					/*
+					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio2_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO2_T9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio4 {
+						gpio4_default_mode: gpio4_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio4_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO4_W2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio10_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO10_U17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio11_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO11_AA18";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio12 {
+						gpio12_default_mode: gpio12_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio12_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO12_U16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio13_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO13_W17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio16 {
+						gpio16_default_mode: gpio16_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio16_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO16_F15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio24 {
+						gpio24_default_mode: gpio24_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio24_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO24_T14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio25 {
+						gpio25_default_mode: gpio25_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio25_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO25_R16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio36 {
+						gpio36_default_mode: gpio36_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio36_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO36_A17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio37 {
+						gpio37_default_mode: gpio37_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio37_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO37_E15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio38 {
+						gpio38_default_mode: gpio38_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio38_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO38_C17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio39 {
+						gpio39_default_mode: gpio39_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio39_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO39_E16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio42 {
+						gpio42_default_mode: gpio42_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio42_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO42_U2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+					 */
+					gpio26 {
+						gpio26_default_mode: gpio26_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio26_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO26_M16";
+								output-low;
+							};
+						};
+					};
+					gpio35 {
+						gpio35_default_mode: gpio35_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio35_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO35_W15";
+								output-low;
+							};
+						};
+					};
+					/*
+					 * This sets up the YCBCR connector pins, i.e. analog video out.
+					 * Set as input with no bias.
+					 */
+					ycbcr {
+						ycbcr_default_mode: ycbcr_default {
+							default_mux {
+								ste,function = "ycbcr";
+								ste,pins = "ycbcr0123_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO6_Y18",
+									 "GPIO7_AA20",
+									 "GPIO8_W18",
+									 "GPIO9_AA19";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pins 14 and 15 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								ste,function = "pwmout";
+								ste,pins = "pwmout1_d_1", "pwmout2_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO14_F14",
+									 "GPIO15_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 1 */
+					adi1 {
+						adi1_default_mode: adi1_default {
+							default_mux {
+								ste,function = "adi1";
+								ste,pins = "adi1_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO17_P5",
+									 "GPIO18_R5",
+									 "GPIO19_U5",
+									 "GPIO20_T5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the USB UICC pins */
+					usbuicc {
+						usbuicc_default_mode: usbuicc_default {
+							default_mux {
+								ste,function = "usbuicc";
+								ste,pins = "usbuicc_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO21_H19",
+									 "GPIO22_G20",
+									 "GPIO23_G19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the microphone pins */
+					dmic {
+						dmic_default_mode: dmic_default {
+							default_mux {
+								ste,function = "dmic";
+								ste,pins = "dmic12_d_1",
+									 "dmic34_d_1",
+									 "dmic56_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO27_J6",
+									 "GPIO28_K6",
+									 "GPIO29_G6",
+									 "GPIO30_H6",
+									 "GPIO31_F5",
+									 "GPIO32_G5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					extcpena {
+						extcpena_default_mode: extcpena_default {
+							default_mux {
+								ste,function = "extcpena";
+								ste,pins = "extcpena_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO34_R17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								ste,function = "modsclsda";
+								ste,pins = "modsclsda_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO40_T19",
+									"GPIO41_U19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								ste,function = "sysclkreq";
+								ste,pins = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO1_T10";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio1_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO1_T10";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								ste,function = "sysclkreq";
+								ste,pins = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO3_U9";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio3_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO3_U9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-href-ab8505.dtsi b/src/arm/ste-href-ab8505.dtsi
new file mode 100644
index 000000000000..6006d62086a2
--- /dev/null
+++ b/src/arm/ste-href-ab8505.dtsi
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				ab8505-gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio34_default_mode>,
+						    <&gpio50_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi2_default_mode>,
+						    <&modsclsda_default_mode>,
+						    <&resethw_default_mode>,
+						    <&service_default_mode>;
+
+					/*
+					 * Pins 2, 10, 11, 13, 34 and 50
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio2_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO2_R5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio10_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO10_B16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio11_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO11_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio13_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO13_D17";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					gpio34 {
+						gpio34_default_mode: gpio34_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio34_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO34_H14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio50 {
+						gpio50_default_mode: gpio50_default {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio50_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO50_L4";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pin 14 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								ste,function = "pwmout";
+								ste,pins = "pwmout1_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO14_C16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 2 */
+					adi2 {
+						adi2_default_mode: adi2_default {
+							default_mux {
+								ste,function = "adi2";
+								ste,pins = "adi2_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO17_P2",
+									 "GPIO18_N3",
+									 "GPIO19_T1",
+									 "GPIO20_P3";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								ste,function = "modsclsda";
+								ste,pins = "modsclsda_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO40_J15",
+									"GPIO41_J14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					resethw {
+						resethw_default_mode: resethw_default {
+							default_mux {
+								ste,function = "resethw";
+								ste,pins = "resethw_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO52_D16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					service {
+						service_default_mode: service_default {
+							default_mux {
+								ste,function = "service";
+								ste,pins = "service_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO53_D15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								ste,function = "sysclkreq";
+								ste,pins = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO1_N4";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio1_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO1_N4";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								ste,function = "sysclkreq";
+								ste,pins = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO3_P5";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								ste,function = "gpio";
+								ste,pins = "gpio3_a_1";
+							};
+							default_cfg {
+								ste,pins = "GPIO3_P5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/stih407-b2120.dts b/src/arm/stih407-b2120.dts
new file mode 100644
index 000000000000..fe69f92e5f82
--- /dev/null
+++ b/src/arm/stih407-b2120.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih407.dtsi"
+/ {
+	model = "STiH407 B2120";
+	compatible = "st,stih407-b2120", "st,stih407";
+
+	chosen {
+		bootargs = "console=ttyAS0,115200";
+		linux,stdout-path = &sbc_serial0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial0;
+	};
+
+	soc {
+		sbc_serial0: serial@9530000 {
+			status = "okay";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			red {
+				#gpio-cells = <2>;
+				label = "Front Panel LED";
+				gpios = <&pio4 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			green {
+				#gpio-cells = <2>;
+				gpios = <&pio1 3 0>;
+				default-state = "off";
+			};
+		};
+
+		i2c@9842000 {
+			status = "okay";
+		};
+
+		i2c@9843000 {
+			status = "okay";
+		};
+
+		i2c@9844000 {
+			status = "okay";
+		};
+
+		i2c@9845000 {
+			status = "okay";
+		};
+
+		i2c@9540000 {
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		i2c@9541000 {
+			status = "okay";
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+	};
+};
diff --git a/src/arm/stih407-clock.dtsi b/src/arm/stih407-clock.dtsi
new file mode 100644
index 000000000000..800f46f009f3
--- /dev/null
+++ b/src/arm/stih407-clock.dtsi
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+	clocks {
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		clk_sysin: clk-sysin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: arm-periph-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <600000000>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		clk_ext2f_a9: clockgen-c0@13 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			clock-output-names = "clk-s-icn-reg-0";
+		};
+	};
+};
diff --git a/src/arm/stih407-pinctrl.dtsi b/src/arm/stih407-pinctrl.dtsi
new file mode 100644
index 000000000000..402844cb3152
--- /dev/null
+++ b/src/arm/stih407-pinctrl.dtsi
@@ -0,0 +1,615 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+	aliases {
+		/* 0-5: PIO_SBC */
+		gpio0 = &pio0;
+		gpio1 = &pio1;
+		gpio2 = &pio2;
+		gpio3 = &pio3;
+		gpio4 = &pio4;
+		gpio5 = &pio5;
+		/* 10-19: PIO_FRONT0 */
+		gpio6 = &pio10;
+		gpio7 = &pio11;
+		gpio8 = &pio12;
+		gpio9 = &pio13;
+		gpio10 = &pio14;
+		gpio11 = &pio15;
+		gpio12 = &pio16;
+		gpio13 = &pio17;
+		gpio14 = &pio18;
+		gpio15 = &pio19;
+		/* 20: PIO_FRONT1 */
+		gpio16 = &pio20;
+		/* 30-35: PIO_REAR */
+		gpio17 = &pio30;
+		gpio18 = &pio31;
+		gpio19 = &pio32;
+		gpio20 = &pio33;
+		gpio21 = &pio34;
+		gpio22 = &pio35;
+		/* 40-42: PIO_FLASH */
+		gpio23 = &pio40;
+		gpio24 = &pio41;
+		gpio25 = &pio42;
+	};
+
+	soc {
+		pin-controller-sbc {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-sbc-pinctrl";
+			st,syscfg = <&syscfg_sbc>;
+			reg = <0x0961f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09610000 0x6000>;
+
+			pio0: gpio@09610000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO0";
+			};
+			pio1: gpio@09611000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO1";
+			};
+			pio2: gpio@09612000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO2";
+			};
+			pio3: gpio@09613000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO3";
+			};
+			pio4: gpio@09614000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO4";
+			};
+
+			pio5: gpio@09615000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO5";
+			};
+
+			rc {
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&pio4 0 ALT2 IN>;
+					};
+				};
+			};
+
+			/* SBC_ASC0 - UART10 */
+			sbc_serial0 {
+				pinctrl_sbc_serial0: sbc_serial0-0 {
+					st,pins {
+						tx = <&pio3 4 ALT1 OUT>;
+						rx = <&pio3 5 ALT1 IN>;
+					};
+				};
+			};
+			/* SBC_ASC1 - UART11 */
+			sbc_serial1 {
+				pinctrl_sbc_serial1: sbc_serial1-0 {
+					st,pins {
+						tx = <&pio2 6 ALT3 OUT>;
+						rx = <&pio2 7 ALT3 IN>;
+					};
+				};
+			};
+
+			i2c10 {
+				pinctrl_i2c10_default: i2c10-default {
+					st,pins {
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c11 {
+				pinctrl_i2c11_default: i2c11-default {
+					st,pins {
+						sda = <&pio5 1 ALT1 BIDIR>;
+						scl = <&pio5 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&pio4 0 ALT6 IN>;
+						keyin1 = <&pio4 5 ALT4 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio4 6 ALT4 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
+					};
+				};
+			};
+
+			gmac1 {
+				/*
+				 * Almost all the boards based on STiH407 SoC have an embedded
+				 * switch where the mdio/mdc have been used for managing the SMI
+				 * iface via I2C. For this reason these lines can be allocated
+				 * by using dedicated configuration (in case of there will be a
+				 * standard PHY transceiver on-board).
+				 */
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+
+						txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
+						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio: rgmii1-mdio {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+					};
+				};
+
+				pinctrl_mii1: mii1 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+						mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+			};
+
+			pwm1 {
+				pinctrl_pwm1_chan0_default: pwm1-0-default {
+					st,pins {
+						pwm-out = <&pio3 0 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan1_default: pwm1-1-default {
+					st,pins {
+						pwm-out = <&pio4 4 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan2_default: pwm1-2-default {
+					st,pins {
+						pwm-out = <&pio4 6 ALT3 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan3_default: pwm1-3-default {
+					st,pins {
+						pwm-out = <&pio4 7 ALT3 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0920f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09200000 0x10000>;
+
+			pio10: pio@09200000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO10";
+			};
+			pio11: pio@09201000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO11";
+			};
+			pio12: pio@09202000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO12";
+			};
+			pio13: pio@09203000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO13";
+			};
+			pio14: pio@09204000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO14";
+			};
+			pio15: pio@09205000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO15";
+			};
+			pio16: pio@09206000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x100>;
+				st,bank-name = "PIO16";
+			};
+			pio17: pio@09207000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x100>;
+				st,bank-name = "PIO17";
+			};
+			pio18: pio@09208000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x100>;
+				st,bank-name = "PIO18";
+			};
+			pio19: pio@09209000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x100>;
+				st,bank-name = "PIO19";
+			};
+
+			/* Comms */
+			serial0 {
+				pinctrl_serial0: serial0-0 {
+					st,pins {
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial1 {
+				pinctrl_serial1: serial1-0 {
+					st,pins {
+						tx = <&pio16 0 ALT1 OUT>;
+						rx = <&pio16 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx = <&pio15 0 ALT1 OUT>;
+						rx = <&pio15 1 ALT1 IN>;
+					};
+				};
+			};
+
+			mmc1 {
+				pinctrl_sd1: sd1-0 {
+					st,pins {
+						sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+						sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
+						sd_led = <&pio16 6 ALT6 OUT>;
+						sd_pwren = <&pio16 7 ALT6 OUT>;
+						sd_cd = <&pio19 0 ALT6 IN>;
+						sd_wp = <&pio19 1 ALT6 IN>;
+					};
+				};
+			};
+
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&pio10 6 ALT2 BIDIR>;
+						scl = <&pio10 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&pio11 1 ALT2 BIDIR>;
+						scl = <&pio11 0 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c2 {
+				pinctrl_i2c2_default: i2c2-default {
+					st,pins {
+						sda = <&pio15 6 ALT2 BIDIR>;
+						scl = <&pio15 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c3 {
+				pinctrl_i2c3_default: i2c3-default {
+					st,pins {
+						sda = <&pio18 6 ALT1 BIDIR>;
+						scl = <&pio18 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			spi0 {
+				pinctrl_spi0_default: spi0-default {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 BIDIR>;
+						mrst = <&pio12 7 ALT2 BIDIR>;
+						scl = <&pio12 5 ALT2 BIDIR>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front1 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0921f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09210000 0x10000>;
+
+			pio20: pio@09210000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+		};
+
+		pin-controller-rear {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-rear-pinctrl";
+			st,syscfg = <&syscfg_rear>;
+			reg = <0x0922f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09220000 0x6000>;
+
+			pio30: gpio@09220000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO30";
+			};
+			pio31: gpio@09221000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO31";
+			};
+			pio32: gpio@09222000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO32";
+			};
+			pio33: gpio@09223000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO33";
+			};
+			pio34: gpio@09224000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO34";
+			};
+			pio35: gpio@09225000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO35";
+			};
+
+			i2c4 {
+				pinctrl_i2c4_default: i2c4-default {
+					st,pins {
+						sda = <&pio30 1 ALT1 BIDIR>;
+						scl = <&pio30 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c5 {
+				pinctrl_i2c5_default: i2c5-default {
+					st,pins {
+						sda = <&pio34 4 ALT1 BIDIR>;
+						scl = <&pio34 3 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			usb3 {
+				pinctrl_usb3: usb3-2 {
+					st,pins {
+						usb-oc-detect = <&pio35 4 ALT1 IN>;
+						usb-pwr-enable = <&pio35 5 ALT1 OUT>;
+						usb-vbus-valid = <&pio35 6 ALT1 IN>;
+					};
+				};
+			};
+
+			pwm0 {
+				pinctrl_pwm0_chan0_default: pwm0-0-default {
+					st,pins {
+						pwm-out = <&pio31 1 ALT1 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-flash {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-flash-pinctrl";
+			st,syscfg = <&syscfg_flash>;
+			reg = <0x0923f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09230000 0x3000>;
+
+			pio40: gpio@09230000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x100>;
+				st,bank-name = "PIO40";
+			};
+			pio41: gpio@09231000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO41";
+			};
+			pio42: gpio@09232000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO42";
+			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0-0 {
+					st,pins {
+						emmc_clk = <&pio40 6 ALT1 BIDIR>;
+						emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
+						emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
+						emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
+						emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
+						emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
+						emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
+						emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
+						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/stih407.dtsi b/src/arm/stih407.dtsi
new file mode 100644
index 000000000000..4f9024f19866
--- /dev/null
+++ b/src/arm/stih407.dtsi
@@ -0,0 +1,263 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-clock.dtsi"
+#include "stih407-pinctrl.dtsi"
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	intc: interrupt-controller@08761000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+	};
+
+	scu@08760000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x08760000 0x1000>;
+	};
+
+	timer@08760200 {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x08760200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&arm_periph_clk>;
+	};
+
+	l2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0x08762000 0x1000>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible = "simple-bus";
+
+		syscfg_sbc: sbc-syscfg@9620000 {
+			compatible = "st,stih407-sbc-syscfg", "syscon";
+			reg = <0x9620000 0x1000>;
+		};
+
+		syscfg_front: front-syscfg@9280000 {
+			compatible = "st,stih407-front-syscfg", "syscon";
+			reg = <0x9280000 0x1000>;
+		};
+
+		syscfg_rear: rear-syscfg@9290000 {
+			compatible = "st,stih407-rear-syscfg", "syscon";
+			reg = <0x9290000 0x1000>;
+		};
+
+		syscfg_flash: flash-syscfg@92a0000 {
+			compatible = "st,stih407-flash-syscfg", "syscon";
+			reg = <0x92a0000 0x1000>;
+		};
+
+		syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
+			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+			reg = <0x9600000 0x1000>;
+		};
+
+		syscfg_core: core-syscfg@92b0000 {
+			compatible = "st,stih407-core-syscfg", "syscon";
+			reg = <0x92b0000 0x1000>;
+		};
+
+		syscfg_lpm: lpm-syscfg@94b5100 {
+			compatible = "st,stih407-lpm-syscfg", "syscon";
+			reg = <0x94b5100 0x1000>;
+		};
+
+		serial@9830000 {
+			compatible = "st,asc";
+			reg = <0x9830000 0x2c>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial0>;
+			clocks = <&clk_ext2f_a9>;
+
+			status = "disabled";
+		};
+
+		serial@9831000 {
+			compatible = "st,asc";
+			reg = <0x9831000 0x2c>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial1>;
+			clocks = <&clk_ext2f_a9>;
+
+			status = "disabled";
+		};
+
+		serial@9832000 {
+			compatible = "st,asc";
+			reg = <0x9832000 0x2c>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial2>;
+			clocks = <&clk_ext2f_a9>;
+
+			status = "disabled";
+		};
+
+		/* SBC_ASC0 - UART10 */
+		sbc_serial0: serial@9530000 {
+			compatible = "st,asc";
+			reg = <0x9530000 0x2c>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial0>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		serial@9531000 {
+			compatible = "st,asc";
+			reg = <0x9531000 0x2c>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial1>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		i2c@9840000 {
+			compatible = "st,comms-ssc4-i2c";
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x9840000 0x110>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9841000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9842000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9843000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9844000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9845000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9845000 0x110>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_ext2f_a9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c5_default>;
+
+			status = "disabled";
+		};
+
+
+		/* SSCs on SBC */
+		i2c@9540000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c10_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9541000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c11_default>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/stih416-b2020e.dts b/src/arm/stih416-b2020e.dts
new file mode 100644
index 000000000000..ba0fa2caaf18
--- /dev/null
+++ b/src/arm/stih416-b2020e.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih416.dtsi"
+#include "stih41x-b2020.dtsi"
+/ {
+	model = "STiH416 B2020 REV-E";
+	compatible = "st,stih416-b2020", "st,stih416";
+
+	soc {
+		leds {
+			compatible = "gpio-leds";
+			red {
+				#gpio-cells		= <1>;
+				label			= "Front Panel LED";
+				gpios			= <&PIO4 1>;
+				linux,default-trigger	= "heartbeat";
+			};
+			green {
+				gpios			= <&PIO1 3>;
+				default-state 		= "off";
+			};
+		};
+
+		ethernet1: dwmac@fef08000 {
+			snps,reset-gpio = <&PIO0 7>;
+		};
+	};
+};
diff --git a/src/arm/stih41x-b2020x.dtsi b/src/arm/stih41x-b2020x.dtsi
new file mode 100644
index 000000000000..df01c1211b32
--- /dev/null
+++ b/src/arm/stih41x-b2020x.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/ {
+	soc {
+		spifsm: spifsm@fe902000 {
+			#address-cells = <1>;
+			#size-cells    = <1>;
+
+			status = "okay";
+
+			partition@0 {
+				label = "SerialFlash1";
+				reg   = <0x00000000 0x00500000>;
+			};
+
+			partition@500000 {
+				label = "SerialFlash2";
+				reg   = <0x00500000 0x00b00000>;
+			};
+		};
+	};
+};
diff --git a/src/arm/sun4i-a10-ba10-tvbox.dts b/src/arm/sun4i-a10-ba10-tvbox.dts
new file mode 100644
index 000000000000..1763cc7ec023
--- /dev/null
+++ b/src/arm/sun4i-a10-ba10-tvbox.dts
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "BA10 tvbox";
+	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			usb2_vbus_pin_a: usb2_vbus_pin@0 {
+				allwinner,pins = "PH12";
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		gpio = <&pio 7 12 0>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun4i-a10-inet97fv2.dts b/src/arm/sun4i-a10-inet97fv2.dts
new file mode 100644
index 000000000000..6b0c37812ade
--- /dev/null
+++ b/src/arm/sun4i-a10-inet97fv2.dts
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2014 Open Source Support GmbH
+ *
+ * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "INet-97F Rev 02";
+	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun4i-a10-olinuxino-lime.dts b/src/arm/sun4i-a10-olinuxino-lime.dts
new file mode 100644
index 000000000000..d046d568f5a1
--- /dev/null
+++ b/src/arm/sun4i-a10-olinuxino-lime.dts
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Olimex A10-OLinuXino-LIME";
+	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+				allwinner,pins = "PC3";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			led_pins_olinuxinolime: led_pins@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <1>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a10-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 0>;
+			default-state = "on";
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+		gpio = <&pio 2 3 0>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun4i-a10-pcduino.dts b/src/arm/sun4i-a10-pcduino.dts
new file mode 100644
index 000000000000..6675bcd7860e
--- /dev/null
+++ b/src/arm/sun4i-a10-pcduino.dts
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "LinkSprite pcDuino";
+	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun5i-a10s-r7-tv-dongle.dts b/src/arm/sun5i-a10s-r7-tv-dongle.dts
new file mode 100644
index 000000000000..43a93762d4f2
--- /dev/null
+++ b/src/arm/sun5i-a10s-r7-tv-dongle.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i-a10s.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "R7 A10s hdmi tv-stick";
+	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 1 0>; /* PG1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc1: mmc@01c10000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins_a>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			non-removable;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+				allwinner,pins = "PG1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
+			led_pins_r7: led_pins@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <1>;
+				allwinner,pull = <0>;
+			};
+
+			usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+				allwinner,pins = "PG13";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_r7>;
+
+		green {
+			label = "r7-tv-dongle:green:usr";
+			gpios = <&pio 1 2 0>;
+			default-state = "on";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_r7>;
+		gpio = <&pio 6 13 0>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun6i-a31-app4-evb1.dts b/src/arm/sun6i-a31-app4-evb1.dts
new file mode 100644
index 000000000000..2bbf8867362b
--- /dev/null
+++ b/src/arm/sun6i-a31-app4-evb1.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2014 Boris Brezillon
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
+	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		pio: pinctrl@01c20800 {
+			usb1_vbus_pin_a: usb1_vbus_pin@0 {
+				allwinner,pins = "PH27";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		usbphy: phy@01c19400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c1a000 {
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_a>;
+		gpio = <&pio 7 27 0>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun6i-a31-hummingbird.dts b/src/arm/sun6i-a31-hummingbird.dts
new file mode 100644
index 000000000000..f142065b3c1f
--- /dev/null
+++ b/src/arm/sun6i-a31-hummingbird.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Merrii A31 Hummingbird";
+	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
+			vmmc-supply = <&reg_vcc3v0>;
+			bus-width = <4>;
+			cd-gpios = <&pio 0 8 0>; /* PA8 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c19400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c1a000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c1a400 {
+			status = "okay";
+		};
+
+		pio: pinctrl@01c20800 {
+			mmc0_pins_a: mmc0@0 {
+				/* external pull-ups missing for some pins */
+				allwinner,pull = <1>;
+			};
+
+			mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
+				allwinner,pins = "PA8";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+
+			usb1_vbus_pin_a: usb1_vbus_pin@0 {
+				allwinner,pins = "PH24";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			/* pull-ups and devices require AXP221 DLDO3 */
+			status = "failed";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+
+			pcf8563: rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		gmac: ethernet@01c30000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_a>;
+		gpio = <&pio 7 24 0>; /* PH24 */
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun6i-a31-m9.dts b/src/arm/sun6i-a31-m9.dts
new file mode 100644
index 000000000000..bc6115da5ae1
--- /dev/null
+++ b/src/arm/sun6i-a31-m9.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Mele M9 / A1000G Quad top set box";
+	compatible = "mele,m9", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 22 0>; /* PH22 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		pio: pinctrl@01c20800 {
+			mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+				allwinner,pins = "PH22";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <1>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/sun7i-a20-i12-tvbox.dts b/src/arm/sun7i-a20-i12-tvbox.dts
new file mode 100644
index 000000000000..6a67712d417a
--- /dev/null
+++ b/src/arm/sun7i-a20-i12-tvbox.dts
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "I12 / Q5 / QT840A A20 tvbox";
+	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc3: mmc@01c12000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins_a>;
+			vmmc-supply = <&reg_vmmc3>;
+			bus-width = <4>;
+			non-removable;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc3_pins_a: mmc3@0 {
+				/* AP6210 / AP6330 requires pull-up */
+				allwinner,pull = <1>;
+			};
+
+			vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
+				allwinner,pins = "PH12";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
+				allwinner,pins = "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			led_pins_i12_tvbox: led_pins@0 {
+				allwinner,pins = "PH9", "PH20";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 8>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			phy-supply = <&reg_gmac_3v3>;
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_i12_tvbox>;
+
+		red {
+			label = "i12_tvbox:red:usr";
+			gpios = <&pio 7 9 1>;
+		};
+
+		blue {
+			label = "i12_tvbox:blue:usr";
+			gpios = <&pio 7 20 0>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 2 0>;
+	};
+
+	reg_vmmc3_io: vmmc3-io {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
+		regulator-name = "vmmc3-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* This controls VCC-PI, must be always on! */
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 7 12 0>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&pio 7 21 0>;
+	};
+};
diff --git a/src/arm/sun7i-a20-pcduino3.dts b/src/arm/sun7i-a20-pcduino3.dts
new file mode 100644
index 000000000000..046dfc0d45d8
--- /dev/null
+++ b/src/arm/sun7i-a20-pcduino3.dts
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "LinkSprite pcDuino3";
+	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 0>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ahci_pwr_pin_a: ahci_pwr_pin@0 {
+				allwinner,pins = "PH2";
+			};
+
+			led_pins_pcduino3: led_pins@0 {
+				allwinner,pins = "PH15", "PH16";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			key_pins_pcduino3: key_pins@0 {
+				allwinner,pins = "PH17", "PH18", "PH19";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 8>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_pcduino3>;
+
+		tx {
+			label = "pcduino3:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino3:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_pcduino3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@0 {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+		button@1 {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_ahci_5v: ahci-5v {
+		gpio = <&pio 7 2 0>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun8i-a23-ippo-q8h-v5.dts b/src/arm/sun8i-a23-ippo-q8h-v5.dts
new file mode 100644
index 000000000000..34002e3eba9d
--- /dev/null
+++ b/src/arm/sun8i-a23-ippo-q8h-v5.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun8i-a23.dtsi"
+
+/ {
+	model = "Ippo Q8H Dual Core Tablet (v5)";
+	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		r_uart: serial@01f02800 {
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/sun8i-a23.dtsi b/src/arm/sun8i-a23.dtsi
new file mode 100644
index 000000000000..54ac0787216a
--- /dev/null
+++ b/src/arm/sun8i-a23.dtsi
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &r_uart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		/* dummy clock until actually implemented */
+		pll6: pll6_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <600000000>;
+			clock-output-names = "pll6";
+		};
+
+		cpu: cpu_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb1_mux: ahb1_mux_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+			clock-output-names = "ahb1_mux";
+		};
+
+		ahb1: ahb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1_mux>;
+			clock-output-names = "ahb1";
+		};
+
+		apb1: apb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+					"ahb1_nand", "ahb1_sdram",
+					"ahb1_hstimer", "ahb1_spi0",
+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
+					"ahb1_gpu", "ahb1_spinlock",
+					"ahb1_drc";
+		};
+
+		apb1_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_pio",
+					"apb1_daudio0",	"apb1_daudio1";
+		};
+
+		apb2_mux: apb2_mux_clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+			clock-output-names = "apb2_mux";
+		};
+
+		apb2: apb2_clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-apb2-div-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&apb2_mux>;
+			clock-output-names = "apb2";
+		};
+
+		apb2_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2",
+					"apb2_uart3", "apb2_uart4";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ahb1_rst: reset@01c202c0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202c0 0xc>;
+		};
+
+		apb1_rst: reset@01c202d0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d0 0x4>;
+		};
+
+		apb2_rst: reset@01c202d8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d8 0x4>;
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <0 18 4>,
+				     <0 19 4>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <0 25 4>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <0 0 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 16>;
+			resets = <&apb2_rst 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <0 1 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 17>;
+			resets = <&apb2_rst 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <0 2 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 18>;
+			resets = <&apb2_rst 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <0 3 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 19>;
+			resets = <&apb2_rst 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <0 4 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 20>;
+			resets = <&apb2_rst 20>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		prcm@01f01400 {
+			compatible = "allwinner,sun8i-a23-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&osc24M>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_timer",
+						"apb0_rsb", "apb0_uart",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		r_uart: serial@01f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <0 38 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb0_gates 4>;
+			resets = <&apb0_rst 4>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/sunxi-common-regulators.dtsi b/src/arm/sunxi-common-regulators.dtsi
new file mode 100644
index 000000000000..3d021efd1a38
--- /dev/null
+++ b/src/arm/sunxi-common-regulators.dtsi
@@ -0,0 +1,89 @@
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc@01c00000 {
+		pio: pinctrl@01c20800 {
+			ahci_pwr_pin_a: ahci_pwr_pin@0 {
+				allwinner,pins = "PB8";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			usb1_vbus_pin_a: usb1_vbus_pin@0 {
+				allwinner,pins = "PH6";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+
+			usb2_vbus_pin_a: usb2_vbus_pin@0 {
+				allwinner,pins = "PH3";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ahci_pwr_pin_a>;
+		regulator-name = "ahci-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 1 8 0>;
+		status = "disabled";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_pin_a>;
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 6 0>;
+		status = "disabled";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_pin_a>;
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 3 0>;
+		status = "disabled";
+	};
+
+	reg_vcc3v0: vcc3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
diff --git a/src/arm/tegra114-roth.dts b/src/arm/tegra114-roth.dts
new file mode 100644
index 000000000000..c7c6825f11fb
--- /dev/null
+++ b/src/arm/tegra114-roth.dts
@@ -0,0 +1,1125 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA SHIELD";
+	compatible = "nvidia,roth", "nvidia,tegra114";
+
+	chosen {
+		/* SHIELD's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1";
+		/* SHIELD's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory {
+		/* memory >= 0x79600000 is reserved for firmware usage */
+		reg = <0x80000000 0x79600000>;
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_1v2_ap>;
+
+			panel@0 {
+				compatible = "lg,lh500wx1-sd03";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+						"dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+						"dap2_fs_pa2",
+						"dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_fs_pp4",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+						"dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0",
+						"pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5",
+						"gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs6_n_pi13 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2",
+						"gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_cd_n_pv2",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4",
+						"gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+						"pbb5",
+						"pbb6",
+						"pbb7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1",
+						"pcc2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad12_ph4",
+						"gmi_ad15_ph7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3",
+						"gmi_ad13_ph5",
+						"gmi_ad8_ph0",
+						"gmi_clk_pk1",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6",
+						"gmi_cs0_n_pj0",
+						"gmi_cs4_n_pk2",
+						"gmi_cs7_n_pi6",
+						"gmi_dqs_p_pj3",
+						"gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row4_pr4",
+						"kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	/* Usable on reworked devices only */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		regulator@43 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd-cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				regulators {
+					smps12 {
+						regulator-name = "vdd-ddr";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1500000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps3 {
+						regulator-name = "vdd-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-soc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll-1v05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps9 {
+						regulator-name = "vdd-2v85-emmc";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vdd-fan";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps10_out2 {
+						regulator-name = "vdd-5v0-sys";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "vdd-2v8-display";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v2_ap: ldo3 {
+						regulator-name = "avdd-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo5 {
+						regulator-name = "avdd-hdmi-pll";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo6 {
+						regulator-name = "vdd-sensor-2v8";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_sdmmc3: ldo9 {
+						regulator-name = "vddio-sdmmc3";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_3v3_sys: regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* SD card */
+	sdhci@78000400 {
+		status = "okay";
+		bus-width = <4>;
+		vmmc-supply = <&vddio_sdmmc3>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* eMMC */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vdd_1v8>;
+		non-removable;
+	};
+
+	/* External USB port (must be powered) */
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	/* SHIELD controller */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		back {
+			label = "Back";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lcd_bl_en: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "lcd_bl_en";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+		};
+
+		vdd_lcd: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_lcd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&vdd_1v8>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v8_ts";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
+			regulator-boot-on;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_3v3_ts";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_1v8_com";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&vdd_1v8>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_3v3_com";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_sys>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/src/arm/tegra114-tn7.dts b/src/arm/tegra114-tn7.dts
new file mode 100644
index 000000000000..963662145635
--- /dev/null
+++ b/src/arm/tegra114-tn7.dts
@@ -0,0 +1,348 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "Tegra Note 7";
+	compatible = "nvidia,tn7", "nvidia,tegra114";
+
+	chosen {
+		/* TN7's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
+		/* TN7's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory {
+		/* memory >= 0x37e00000 is reserved for firmware usage */
+		reg = <0x80000000 0x37e00000>;
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_1v2_ap>;
+
+			panel@0 {
+				compatible = "lg,ld070wx3-sl01";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldoln-in-supply = <&vdd_smps10_out2>;
+
+				regulators {
+					smps123 {
+						regulator-name = "vd-cpu";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vd-soc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps6 {
+						regulator-name = "va-lcd-hv";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps7 {
+						regulator-name = "vd-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps8 {
+						regulator-name = "vs-pmu-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_2v9_sys: smps9 {
+						regulator-name = "vs-sys-2v9";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out1: smps10_out1 {
+						regulator-name = "vd-smps10-out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out2: smps10_out2 {
+						regulator-name = "vd-smps10-out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo1 {
+						regulator-name = "va-pllx";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v2_ap: ldo2 {
+						regulator-name = "va-ap-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vd-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vd-ts-hv";
+						regulator-min-microvolt = <3200000>;
+						regulator-max-microvolt = <3200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo5 {
+						regulator-name = "va-cam2-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo6 {
+						regulator-name = "va-sns-hv";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo7 {
+						regulator-name = "va-cam1-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo8 {
+						regulator-name = "va-ap-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						ti,enable-ldo8-tracking;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo9 {
+						regulator-name = "vi-sdcard";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "va-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vdd_1v8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* FIXME: output of BQ24192 */
+		vs_sys: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VS_SYS";
+			regulator-min-microvolt = <4200000>;
+			regulator-max-microvolt = <4200000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		lcd_bl_en: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "VDD_LCD_BL";
+			regulator-min-microvolt = <16500000>;
+			regulator-max-microvolt = <16500000>;
+			gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vs_sys>;
+			regulator-boot-on;
+		};
+
+		vdd_lcd: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "VD_LCD_1V8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_1v8>;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/src/arm/tegra124-jetson-tk1.dts b/src/arm/tegra124-jetson-tk1.dts
new file mode 100644
index 000000000000..624b0fba2d0a
--- /dev/null
+++ b/src/arm/tegra124-jetson-tk1.dts
@@ -0,0 +1,1854 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Jetson TK1";
+	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@0,7000d000/pmic@40";
+		rtc1 = "/rtc@0,7000e000";
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	host1x@0,50000000 {
+		hdmi@0,54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			vdd-supply = <&vdd_3v3_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux: pinmux@0,70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb1 {
+				nvidia,pins = "pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pc7 {
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg0 {
+				nvidia,pins = "pg0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg1 {
+				nvidia,pins = "pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg2 {
+				nvidia,pins = "pg2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg3 {
+				nvidia,pins = "pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 {
+				nvidia,pins = "ph4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph5 {
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 {
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 {
+				nvidia,pins = "pi1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi2 {
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi7 {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "sys";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "displaya_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row16_pt0 {
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 {
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cd_n_pv2 {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vimclk2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 {
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_out_pee4 {
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 {
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 {
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	/* DB9 serial port */
+	serial@0,70006300 {
+		status = "okay";
+	};
+
+	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
+	i2c@0,7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		rt5639: audio-codec@1c {
+			compatible = "realtek,rt5639";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		eeprom@56 {
+			compatible = "atmel,24c02";
+			reg = <0x56>;
+			pagesize = <8>;
+		};
+	};
+
+	/* Expansion GEN2_I2C_* */
+	i2c@0,7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion CAM_I2C_* */
+	i2c@0,7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@0,7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion PWR_I2C_*, on-board components */
+	i2c@0,7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_5_6 {
+					pins = "gpio3", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.05V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				ldo4 {
+					regulator-name = "+2.8V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+3.3V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	/* Expansion TS_SPI_* */
+	spi@0,7000d400 {
+		status = "okay";
+	};
+
+	/* Internal SPI */
+	spi@0,7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q32dw";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@0,7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	padctl@0,7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			usb3 {
+				nvidia,lanes = "pcie-0", "pcie-1";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie {
+				nvidia,lanes = "pcie-2", "pcie-3",
+					       "pcie-4";
+				nvidia,function = "pcie";
+				nvidia,iddq = <0>;
+			};
+
+			sata {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "sata";
+				nvidia,iddq = <0>;
+			};
+		};
+	};
+
+	/* SD card */
+	sdhci@0,700b0400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* eMMC */
+	sdhci@0,700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	ahub@0,70300000 {
+		i2s@0,70301100 {
+			status = "okay";
+		};
+	};
+
+	/* mini-PCIe USB */
+	usb@0,7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d004000 {
+		status = "okay";
+	};
+
+	/* USB A connector */
+	usb@0,7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "+3.3V_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_run: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_3v3_hdmi: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_usb1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "+USB0_VBUS_SW";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb3_vbus: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+5V_USB_HS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_lp0: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-jetson-tk1",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Jetson TK1";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5639>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra30-apalis-eval.dts b/src/arm/tegra30-apalis-eval.dts
new file mode 100644
index 000000000000..45d40f024585
--- /dev/null
+++ b/src/arm/tegra30-apalis-eval.dts
@@ -0,0 +1,260 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis T30 on Apalis Evaluation Board";
+	compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/tps65911@2d";
+		rtc2 = "/rtc@7000e000";
+	};
+
+	pcie-controller@00003000 {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+
+		pci@3,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t00";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+	 * carrier board)
+	 */
+	cami2c: i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+	hdmiddc: i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spidev0: spidev@1 {
+			compatible = "spidev";
+			reg = <1>;
+			spi-max-frequency = <25000000>;
+		};
+	};
+
+	/* SPI5: Apalis SPI2 */
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spidev1: spidev@2 {
+			compatible = "spidev";
+			reg = <2>;
+			spi-max-frequency = <25000000>;
+		};
+	};
+
+	sd1: sdhci@78000000 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	mmc1: sdhci@78000400 {
+		status = "okay";
+		bus-width = <8>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&usbo1_vbus_reg>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&usbh_vbus_reg>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usbh_vbus_reg>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		/* PWM0 */
+		pwms = <&pwm 0 5000000>;
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu", "simple-panel";
+
+		backlight = <&backlight>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		pwm1 {
+			label = "PWM1";
+			pwms = <&pwm 3 19600>;
+			max-brightness = <255>;
+		};
+
+		pwm2 {
+			label = "PWM2";
+			pwms = <&pwm 2 19600>;
+			max-brightness = <255>;
+		};
+
+		pwm3 {
+			label = "PWM3";
+			pwms = <&pwm 1 19600>;
+			max-brightness = <255>;
+		};
+	};
+
+	regulators {
+		sys_5v0_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		/* USBO1_EN */
+		usbo1_vbus_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usbo1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&sys_5v0_reg>;
+		};
+
+		/* USBH_EN */
+		usbh_vbus_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usbh_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&sys_5v0_reg>;
+		};
+	};
+};
diff --git a/src/arm/tegra30-apalis.dtsi b/src/arm/tegra30-apalis.dtsi
new file mode 100644
index 000000000000..a5446cba9804
--- /dev/null
+++ b/src/arm/tegra30-apalis.dtsi
@@ -0,0 +1,687 @@
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Device Tree
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
+ */
+/ {
+	model = "Toradex Apalis T30";
+	compatible = "toradex,apalis_t30", "nvidia,tegra30";
+
+	pcie-controller@00003000 {
+		avdd-pexa-supply = <&vdd2_reg>;
+		vdd-pexa-supply = <&vdd2_reg>;
+		avdd-pexb-supply = <&vdd2_reg>;
+		vdd-pexb-supply = <&vdd2_reg>;
+		avdd-pex-pll-supply = <&vdd2_reg>;
+		avdd-plle-supply = <&ldo6_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		hvdd-pex-supply = <&sys_3v3_reg>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			vdd-supply = <&sys_3v3_reg>;
+			pll-supply = <&vio_reg>;
+
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmiddc>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Apalis BKL1_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			uart3_rts_n_pc0 {
+				nvidia,pins =	"uart3_rts_n_pc0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+			uart3_cts_n_pa1 {
+				nvidia,pins =	"uart3_cts_n_pa1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAN1 on SPI6 */
+			spi2_cs0_n_px3 {
+				nvidia,pins =   "spi2_cs0_n_px3",
+						"spi2_miso_px1",
+						"spi2_mosi_px0",
+						"spi2_sck_px2";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* CAN_INT1 */
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis CAN2 on SPI4 */
+			gmi_a16_pj7 {
+				nvidia,pins =   "gmi_a16_pj7",
+						"gmi_a17_pb0",
+						"gmi_a18_pb1",
+						"gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* CAN_INT2 */
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 */
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc3_clk_pa6 {
+				nvidia,pins =	"sdmmc3_clk_pa6",
+						"sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins =	"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis MMC1_CD# */
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis PWM1 */
+			gpio_pu6 {
+				nvidia,pins =	"gpio_pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM2 */
+			gpio_pu5 {
+				nvidia,pins =	"gpio_pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM3 */
+			gpio_pu4 {
+				nvidia,pins =	"gpio_pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM4 */
+			gpio_pu3 {
+				nvidia,pins =	"gpio_pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis RESET_MOCI# */
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins =	"sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis SD1_CD# */
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			spi1_sck_px5 {
+				nvidia,pins =   "spi1_sck_px5",
+						"spi1_mosi_px4",
+						"spi1_miso_px7",
+						"spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			lcd_sck_pz4 {
+				nvidia,pins =   "lcd_sck_pz4",
+						"lcd_sdout_pn5",
+						"lcd_sdin_pz2",
+						"lcd_cs0_n_pn4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART1 */
+			ulpi_data0 {
+				nvidia,pins =   "ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			ulpi_clk_py0 {
+				nvidia,pins =   "ulpi_clk_py0",
+						"ulpi_dir_py1",
+						"ulpi_nxt_py2",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart2_rxd_pc3 {
+				nvidia,pins =   "uart2_rxd_pc3",
+						"uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart3_rxd_pw7 {
+				nvidia,pins =   "uart3_rxd_pw7",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* eMMC (On-module) */
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LVDS Transceiver Configuration */
+			pbb0 {
+				nvidia,pins =	"pbb0",
+						"pbb7",
+						"pcc1",
+						"pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins =	"pbb3",
+						"pbb4",
+						"pbb5",
+						"pbb6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_PEN_INT# */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	hdmiddc: i2c@7000c700 {
+		clock-frequency = <100000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&sys_3v3_reg>;
+			vcc2-supply = <&sys_3v3_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&sys_3v3_reg>;
+			vcc5-supply = <&sys_3v3_reg>;
+			vcc6-supply = <&vio_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
+			vccio-supply = <&sys_3v3_reg>;
+
+			regulators {
+				/* SW1: +V1.35_VDDIO_DDR */
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				/* SW2: +V1.05 */
+				vdd2_reg: vdd2 {
+					regulator-name =
+						"vdd_pexa,vdd_pexb,vdd_sata";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* SW CTRL: +V1.0_VDD_CPU */
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				/* SWIO: +V1.8 */
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO1: unused */
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+				 * see also v3_3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "en_3v3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* +V1.2_CSI */
+				ldo3_reg: ldo3 {
+					regulator-name =
+						"avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				/* +V1.2_VDD_RTC */
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "avdd_vdac";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_plle";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				/* +V1.2_AVDD_PLL */
+				ldo7_reg: ldo7 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* +V1.0_VDD_DDR_HS */
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* STMPE811 touch screen controller */
+		stmpe811@41 {
+			compatible = "st,stmpe811";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x41>;
+			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&gpio>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				reg = <0>;
+				/* 3.25 MHz ADC clock speed */
+				st,adc-freq = <1>;
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 12-bit ADC */
+				st,mod-12b = <1>;
+				/* internal ADC reference */
+				st,ref-sel = <0>;
+				/* ADC converstion time: 80 clocks */
+				st,sample-time = <4>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT_N directly connected to PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		tps62362@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-low;
+			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
+			ti,vsel1-state-low;
+		};
+	};
+
+	/* SPI4: CAN2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@1 {
+			compatible = "microchip,mcp2515";
+			reg = <1>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	/* SPI6: CAN1 */
+	spi@7000de00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clk@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+		clk16m: clk@1 {
+			compatible = "fixed-clock";
+			reg=<1>;
+			#clock-cells = <0>;
+			clock-frequency = <16000000>;
+			clock-output-names = "clk16m";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sys_3v3_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/tegra30-colibri-eval-v3.dts b/src/arm/tegra30-colibri-eval-v3.dts
new file mode 100644
index 000000000000..7793abd5bef1
--- /dev/null
+++ b/src/arm/tegra30-colibri-eval-v3.dts
@@ -0,0 +1,205 @@
+/dts-v1/;
+
+#include "tegra30-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T30 on Colibri Evaluation Board";
+	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/tps65911@2d";
+		rtc2 = "/rtc@7000e000";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "stm,m41t00";
+			reg = <0x68>;
+		};
+	};
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	hdmiddc: i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Colibri SSP */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		can0: can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+			spi-max-frequency = <10000000>;
+		};
+		spidev0: spi@1 {
+			compatible = "spidev";
+			reg = <1>;
+			spi-max-frequency = <25000000>;
+		};
+	};
+
+	sdhci@78000200 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		vbus-supply = <&usbc_vbus_reg>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usbh_vbus_reg>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		/* PWM<A> */
+		pwms = <&pwm 0 5000000>;
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		clk16m: clk@1 {
+			compatible = "fixed-clock";
+			reg=<1>;
+			#clock-cells = <0>;
+			clock-frequency = <16000000>;
+			clock-output-names = "clk16m";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu", "simple-panel";
+
+		backlight = <&backlight>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		pwmb {
+			label = "PWM<B>";
+			pwms = <&pwm 1 19600>;
+			max-brightness = <255>;
+		};
+		pwmc {
+			label = "PWM<C>";
+			pwms = <&pwm 2 19600>;
+			max-brightness = <255>;
+		};
+		pwmd {
+			label = "PWM<D>";
+			pwms = <&pwm 3 19600>;
+			max-brightness = <255>;
+		};
+	};
+
+	regulators {
+		sys_5v0_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		usbc_vbus_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usbc_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			vin-supply = <&sys_5v0_reg>;
+		};
+
+		/* USBH_PEN */
+		usbh_vbus_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usbh_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+			vin-supply = <&sys_5v0_reg>;
+		};
+	};
+};
diff --git a/src/arm/tegra30-colibri.dtsi b/src/arm/tegra30-colibri.dtsi
new file mode 100644
index 000000000000..c4ed1bec4d92
--- /dev/null
+++ b/src/arm/tegra30-colibri.dtsi
@@ -0,0 +1,386 @@
+#include <dt-bindings/input/input.h>
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Colibri T30 Device Tree
+ * Compatible for Revisions 1.1B/1.1C/1.1D
+ */
+/ {
+	model = "Toradex Colibri T30";
+	compatible = "toradex,colibri_t30", "nvidia,tegra30";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			vdd-supply = <&sys_3v3_reg>;
+			pll-supply = <&vio_reg>;
+
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmiddc>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Colibri BL_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri Backlight PWM<A> */
+			sdmmc3_dat3_pb4 {
+				nvidia,pins =	"sdmmc3_dat3_pb4";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri CAN_INT */
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+			 * todays display need DE, disable LCD_M1
+			 */
+			lcd_m1_pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Thermal alert, need to be disabled */
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri MMC */
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins =	"kb_row11_ps3",
+						"kb_row12_ps4",
+						"kb_row13_ps5",
+						"kb_row14_ps6",
+						"kb_row15_ps7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri SSP */
+			ulpi_clk_py0 {
+				nvidia,pins =   "ulpi_clk_py0",
+						"ulpi_dir_py1",
+						"ulpi_nxt_py2",
+						"ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat6_pd3 {
+				nvidia,pins =	"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri UART_A */
+			ulpi_data0 {
+				nvidia,pins =   "ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART_B */
+			gmi_a16_pj7 {
+				nvidia,pins =   "gmi_a16_pj7",
+						"gmi_a17_pb0",
+						"gmi_a18_pb1",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART_C */
+			uart2_rxd {
+				nvidia,pins =   "uart2_rxd_pc3",
+						"uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC */
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	hdmiddc: i2c@7000c700 {
+		clock-frequency = <100000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&sys_3v3_reg>;
+			vcc2-supply = <&sys_3v3_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&sys_3v3_reg>;
+			vcc5-supply = <&sys_3v3_reg>;
+			vcc6-supply = <&vio_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
+			vccio-supply = <&sys_3v3_reg>;
+
+			regulators {
+				/* SW1: +V1.35_VDDIO_DDR */
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				/* SW2: unused */
+
+				/* SW CTRL: +V1.0_VDD_CPU */
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				/* SWIO: +V1.8 */
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO1: unused */
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+				 * see also v3_3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "en_3v3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* LDO3: unused */
+
+				/* +V1.2_VDD_RTC */
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "avdd_vdac";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_plle";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				/* +V1.2_AVDD_PLL */
+				ldo7_reg: ldo7 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* +V1.0_VDD_DDR_HS */
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT_N directly connected to PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		tps62362@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-low;
+			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
+			ti,vsel1-state-low;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	emmc: sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> AX88772B */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		nvidia,is-wired = <1>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clk@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sys_3v3_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/vf610-colibri.dts b/src/arm/vf610-colibri.dts
new file mode 100644
index 000000000000..aecc7dbc65e8
--- /dev/null
+++ b/src/arm/vf610-colibri.dts
@@ -0,0 +1,123 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "Toradex Colibri VF61 COM";
+	compatible = "toradex,vf610-colibri", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP0,115200";
+	};
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	clocks {
+		enet_ext {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&L2 {
+	arm,data-latency = <2 1 2>;
+	arm,tag-latency = <3 2 3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB20__GPIO_42	0x219d
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_uart0: uart0grp {
+			fsl,pins = <
+				VF610_PAD_PTB10__UART0_TX		0x21a2
+				VF610_PAD_PTB11__UART0_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTD0__UART2_TX		0x21a2
+				VF610_PAD_PTD1__UART2_RX		0x21a1
+				VF610_PAD_PTD2__UART2_RTS		0x21a2
+				VF610_PAD_PTD3__UART2_CTS		0x21a1
+			>;
+		};
+	};
+};
diff --git a/src/arm/zynq-parallella.dts b/src/arm/zynq-parallella.dts
new file mode 100644
index 000000000000..41afd9da6876
--- /dev/null
+++ b/src/arm/zynq-parallella.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * Derived from zynq-zed.dts:
+ *
+ *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *  Copyright (C) 2013 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Adapteva Parallella Board";
+	compatible = "adapteva,parallella", "xlnx,zynq-7000";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+		linux,stdout-path = "/amba/serial@e0001000";
+	};
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ethernet_phy: ethernet-phy@0 {
+		/* Marvell 88E1318 */
+		compatible = "ethernet-phy-id0141.0e90",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
+		                   <0x3 0x11 0xfff0 0xa>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/src/powerpc/akebono.dts b/src/powerpc/akebono.dts
new file mode 100644
index 000000000000..f92ecfed3d2f
--- /dev/null
+++ b/src/powerpc/akebono.dts
@@ -0,0 +1,415 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;	// spin table
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "ibm,akebono";
+	compatible = "ibm,akebono", "ibm,476gtr";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <0>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "ok";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <1>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x01f00000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00040000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		single-cpu-affinity;
+	};
+
+	plb {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clock-frequency = <200000000>; // 200Mhz
+
+		HSTA0: hsta@310000e0000 {
+			compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi";
+			reg = <0x310 0x000e0000 0x0 0xf0>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <108 0
+				      109 0
+				      110 0
+				      111 0
+				      112 0
+				      113 0
+				      114 0
+				      115 0
+				      116 0
+				      117 0
+				      118 0
+				      119 0
+				      120 0
+				      121 0
+				      122 0
+				      123 0>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-476gtr", "ibm,mcmal2";
+			dcr-reg = <0xc0000000 0x062>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <	/*TXEOB*/ 77 0x4
+					/*RXEOB*/ 78 0x4
+					/*SERR*/  76 0x4
+					/*TXDE*/  79 0x4
+					/*RXDE*/  80 0x4>;
+		};
+
+		SATA0: sata@30000010000 {
+			compatible = "ibm,476gtr-ahci";
+			reg = <0x300 0x00010000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <93 2>;
+		};
+
+		EHCI0: ehci@30010000000 {
+			compatible = "ibm,476gtr-ehci", "generic-ehci";
+			reg = <0x300 0x10000000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <85 2>;
+		};
+
+		SD0: sd@30000000000 {
+			compatible = "ibm,476gtr-sdhci", "generic-sdhci";
+			reg = <0x300 0x00000000 0x0 0x10000>;
+			interrupts = <91 2>;
+			interrupt-parent = <&MPIC>;
+		};
+
+		OHCI0: ohci@30010010000 {
+			compatible = "ibm,476gtr-ohci", "generic-ohci";
+			reg = <0x300 0x10010000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <89 1>;
+			};
+
+		OHCI1: ohci@30010020000 {
+			compatible = "ibm,476gtr-ohci", "generic-ohci";
+			reg = <0x300 0x10020000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <88 1>;
+			};
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full
+			 * 32-bit range
+			 */
+			ranges = <0x00000000 0x0000033f 0x00000000 0x80000000
+				  0x80000000 0x0000033f 0x80000000 0x80000000>;
+			clock-frequency = <100000000>;
+
+			RGMII0: emac-rgmii-wol@50004 {
+				compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol";
+				reg = <0x50004 0x00000008>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@30000 {
+				device_type = "network";
+				compatible = "ibm,emac-476gtr", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4
+						 /*Wake*/   0x1 &MPIC 82 0x4>;
+				reg = <0x30000 0x78>;
+
+				/* local-mac-address will normally be added by
+				 * the wrapper. If your device doesn't support
+				 * passing data to the wrapper (in the form
+				 * local-mac-addr=<hwaddr>) then you will need
+				 * to set it manually here. */
+				//local-mac-address = [000000000000];
+
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-wol-device = <&RGMII0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			UART0: serial@10000 {
+				device_type = "serial";
+				compatible = "ns16750", "ns16550";
+				reg = <0x10000 0x00000008>;
+				virtual-reg = <0xe8010000>;
+				clock-frequency = <1851851>;
+				current-speed = <38400>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <39 2>;
+			};
+
+			IIC0: i2c@00000000 {
+				compatible = "ibm,iic-476gtr", "ibm,iic";
+				reg = <0x0 0x00000020>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <37 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "stm,m41t80", "m41st85";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@00000100 {
+				compatible = "ibm,iic-476gtr", "ibm,iic";
+				reg = <0x100 0x00000020>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <38 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				avr@58 {
+					compatible = "ibm,akebono-avr";
+					reg = <0x58>;
+				};
+			};
+
+			FPGA0: fpga@ebc00000 {
+				compatible = "ibm,akebono-fpga";
+				reg = <0xebc00000 0x8>;
+			};
+		};
+
+		PCIE0: pciex@10100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x00000101 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xc0 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>;
+		};
+
+		PCIE1: pciex@20100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x00000201 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000200 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x100 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000240 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>;
+		};
+
+		PCIE2: pciex@18100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x00000181 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000180 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xe0 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000001c0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>;
+		};
+
+		PCIE3: pciex@28100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x3>; /* port number */
+			reg = <0x00000281 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000280 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x120 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000002c0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};
diff --git a/src/powerpc/bsc9132qds.dts b/src/powerpc/bsc9132qds.dts
new file mode 100644
index 000000000000..6cab1062bc74
--- /dev/null
+++ b/src/powerpc/bsc9132qds.dts
@@ -0,0 +1,35 @@
+/*
+ * BSC9132 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/bsc9132si-pre.dtsi"
+
+/ {
+	model = "fsl,bsc9132qds";
+	compatible = "fsl,bsc9132qds";
+
+	memory {
+		device_type = "memory";
+	};
+
+	ifc: ifc@ff71e000 {
+		/* NOR, NAND Flash on board */
+		ranges = <0x0 0x0 0x0 0x88000000 0x08000000
+			  0x1 0x0 0x0 0xff800000 0x00010000>;
+		reg = <0x0 0xff71e000 0x0 0x2000>;
+	};
+
+	soc: soc@ff700000 {
+		ranges = <0x0 0x0 0xff700000 0x100000>;
+	};
+};
+
+/include/ "bsc9132qds.dtsi"
+/include/ "fsl/bsc9132si-post.dtsi"
diff --git a/src/powerpc/bsc9132qds.dtsi b/src/powerpc/bsc9132qds.dtsi
new file mode 100644
index 000000000000..af8e88830221
--- /dev/null
+++ b/src/powerpc/bsc9132qds.dtsi
@@ -0,0 +1,101 @@
+/*
+ * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x4000>;
+	};
+};
+
+&soc {
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <30000000>;
+		};
+	};
+
+	i2c@3000 {
+		fpga: fpga@66 {
+			compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+			reg = <0x66>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x1f>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+};
diff --git a/src/powerpc/fsl/bsc9132si-post.dtsi b/src/powerpc/fsl/bsc9132si-post.dtsi
new file mode 100644
index 000000000000..c72307198140
--- /dev/null
+++ b/src/powerpc/fsl/bsc9132si-post.dtsi
@@ -0,0 +1,185 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	/* FIXME: Test whether interrupts are split */
+	interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,bsc9132-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,bsc9132-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,bsc9132-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-duart-0.dtsi"
+	serial0: serial@4500 {
+		interrupts = <18 2 0 0>;
+	};
+
+	serial1: serial@4600 {
+		interrupts = <18 2 0 0 >;
+	};
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+		interrupts = <22 0x2 0 0>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		interrupts = <19 0x2 0 0>;
+		};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9132-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 1 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+	dma-channel@0 {
+		interrupts = <62 2 0 0>;
+	};
+
+	dma-channel@80 {
+		interrupts = <63 2 0 0>;
+	};
+
+	dma-channel@100 {
+		interrupts = <64 2 0 0>;
+	};
+
+	dma-channel@180 {
+		interrupts = <65 2 0 0>;
+	};
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+	interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		fsl,sdhci-auto-cmd12;
+		interrupts = <41 0x2 0 0>;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+	interrupts	 = <57 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		interrupts	 = <58 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		interrupts	 = <59 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		interrupts	 = <60 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		interrupts	 = <61 2 0 0>;
+	};
+};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+	queue-group@b0000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+	};
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+	queue-group@b1000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+	};
+};
+
+global-utilities@e0000 {
+		compatible = "fsl,bsc9132-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
diff --git a/src/powerpc/fsl/bsc9132si-pre.dtsi b/src/powerpc/fsl/bsc9132si-pre.dtsi
new file mode 100644
index 000000000000..301a9dba5790
--- /dev/null
+++ b/src/powerpc/fsl/bsc9132si-pre.dtsi
@@ -0,0 +1,66 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500v2@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu1: PowerPC,e500v2@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t1040si-post.dtsi b/src/powerpc/fsl/t1040si-post.dtsi
new file mode 100644
index 000000000000..12e597eea3c8
--- /dev/null
+++ b/src/powerpc/fsl/t1040si-post.dtsi
@@ -0,0 +1,430 @@
+/*
+ * T1040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+&pci2 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&pci3 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <16>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v5.0",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t1040-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x1000>;
+		ranges = <0 0x20000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <128 1>;
+			fsl,secondary-cache-geometry = <16 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
+		ranges = <0x0 0xe1000 0x1000>;
+		reg = <0xe1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysclk: sysclk {
+			#clock-cells = <0>;
+			compatible = "fsl,qoriq-sysclk-2.0";
+			clock-output-names = "sysclk", "fixed-clock";
+		};
+
+
+		pll0: pll0@800 {
+			#clock-cells = <1>;
+			reg = <0x800 4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+		};
+
+		pll1: pll1@820 {
+			#clock-cells = <1>;
+			reg = <0x820 4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux1";
+		};
+
+		mux2: mux2@40 {
+			#clock-cells = <0>;
+			reg = <0x40 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux2";
+		};
+
+		mux3: mux3@60 {
+			#clock-cells = <0>;
+			reg = <0x60 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0_0", "pll0_1", "pll0_2",
+				"pll1_0", "pll1_1", "pll1_2";
+			clock-output-names = "cmux3";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t1040-sfp";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t1040-serdes";
+		reg	   = <0xea000 0x4000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t1040-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+			fsl,iommu-parent = <&pamu0>;
+			fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+			phy_type = "utmi";
+			port0;
+		};
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+			fsl,iommu-parent = <&pamu0>;
+			fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+	display@180000 {
+		compatible = "fsl,t1040-diu", "fsl,diu";
+		reg = <0x180000 1000>;
+		interrupts = <74 2 0 0>;
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+/include/ "qoriq-sec5.0-0.dtsi"
+};
diff --git a/src/powerpc/fsl/t1042si-post.dtsi b/src/powerpc/fsl/t1042si-post.dtsi
new file mode 100644
index 000000000000..319b74f29724
--- /dev/null
+++ b/src/powerpc/fsl/t1042si-post.dtsi
@@ -0,0 +1,37 @@
+/*
+ * T1042 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1040si-post.dtsi"
+
+/* Place holder for ethernet related device tree nodes */
diff --git a/src/powerpc/fsl/t104xsi-pre.dtsi b/src/powerpc/fsl/t104xsi-pre.dtsi
new file mode 100644
index 000000000000..bbb7025ca9c2
--- /dev/null
+++ b/src/powerpc/fsl/t104xsi-pre.dtsi
@@ -0,0 +1,104 @@
+/*
+ * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		sdhc = &sdhc;
+
+		crypto = &crypto;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e5500@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e5500@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&mux3>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};
diff --git a/src/powerpc/fsl/t2080si-post.dtsi b/src/powerpc/fsl/t2080si-post.dtsi
new file mode 100644
index 000000000000..082ec2044060
--- /dev/null
+++ b/src/powerpc/fsl/t2080si-post.dtsi
@@ -0,0 +1,69 @@
+/*
+ * T2080 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t2081si-post.dtsi"
+
+&soc {
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
diff --git a/src/powerpc/fsl/t2081si-post.dtsi b/src/powerpc/fsl/t2081si-post.dtsi
new file mode 100644
index 000000000000..97479f0ce630
--- /dev/null
+++ b/src/powerpc/fsl/t2081si-post.dtsi
@@ -0,0 +1,435 @@
+/*
+ * T2081 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+/* controller at 0x240000 */
+&pci0 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+		>;
+	};
+};
+
+/* controller at 0x250000 */
+&pci1 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+		>;
+	};
+};
+
+/* controller at 0x260000 */
+&pci2 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+		>;
+	};
+};
+
+/* controller at 0x270000 */
+&pci3 {
+	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+		>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0
+			      94 2 0 0
+			      95 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-snpc@32000 {
+		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x32000 0x1000 0x1062000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.7",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t2080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000
+		       0x12000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26
+			      16 2 1 25>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x3000>;
+		fsl,portid-mapping = <0x8000>;
+		ranges = <0 0x20000 0x3000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu1: pamu@1000 {
+			reg = <0x1000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+
+		pamu2: pamu@2000 {
+			reg = <0x2000 0x1000>;
+			fsl,primary-cache-geometry = <32 1>;
+			fsl,secondary-cache-geometry = <128 2>;
+		};
+	};
+
+/include/ "qoriq-mpic4.3.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
+		ranges = <0x0 0xe1000 0x1000>;
+		reg = <0xe1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysclk: sysclk {
+			#clock-cells = <0>;
+			compatible = "fsl,qoriq-sysclk-2.0";
+			clock-output-names = "sysclk", "fixed-clock";
+		};
+
+		pll0: pll0@800 {
+			#clock-cells = <1>;
+			reg = <0x800 4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+		};
+
+		pll1: pll1@820 {
+			#clock-cells = <1>;
+			reg = <0x820 4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux1";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t2080-sfp";
+		reg = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t2080-serdes";
+		reg = <0xea000 0x4000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+	dma@100300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
+	};
+/include/ "elo3-dma-1.dtsi"
+	dma@101300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
+	};
+/include/ "elo3-dma-2.dtsi"
+	dma@102300 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */
+	};
+
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t2080-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+	usb0: usb@210000 {
+		compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+		phy_type = "utmi";
+		port0;
+	};
+/include/ "qoriq-usb2-dr-0.dtsi"
+	usb1: usb@211000 {
+		compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+		fsl,iommu-parent = <&pamu1>;
+		fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */
+		dr_mode = "host";
+		phy_type = "utmi";
+	};
+/include/ "qoriq-sec5.2-0.dtsi"
+
+	L2_1: l2-cache-controller@c20000 {
+		/* Cluster 0 L2 cache */
+		compatible = "fsl,t2080-l2-cache-controller";
+		reg = <0xc20000 0x40000>;
+		next-level-cache = <&cpc>;
+	};
+};
diff --git a/src/powerpc/fsl/t208xsi-pre.dtsi b/src/powerpc/fsl/t208xsi-pre.dtsi
new file mode 100644
index 000000000000..e71ceb0e1100
--- /dev/null
+++ b/src/powerpc/fsl/t208xsi-pre.dtsi
@@ -0,0 +1,99 @@
+/*
+ * T2080/T2081 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e6500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+
+		crypto = &crypto;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		dma0 = &dma0;
+		dma1 = &dma1;
+		dma2 = &dma2;
+		sdhc = &sdhc;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e6500@0 {
+			device_type = "cpu";
+			reg = <0 1>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu1: PowerPC,e6500@2 {
+			device_type = "cpu";
+			reg = <2 3>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu2: PowerPC,e6500@4 {
+			device_type = "cpu";
+			reg = <4 5>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+		cpu3: PowerPC,e6500@6 {
+			device_type = "cpu";
+			reg = <6 7>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
+		};
+	};
+};
diff --git a/src/powerpc/kmcoge4.dts b/src/powerpc/kmcoge4.dts
new file mode 100644
index 000000000000..89b4119f3b19
--- /dev/null
+++ b/src/powerpc/kmcoge4.dts
@@ -0,0 +1,152 @@
+/*
+ * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
+ *
+ * (C) Copyright 2014
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p2041si-pre.dtsi"
+
+/ {
+	model = "keymile,kmcoge4";
+	compatible = "keymile,kmcoge4", "keymile,kmp204x";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25fl256s1";
+				reg = <0>;
+				spi-max-frequency = <20000000>; /* input clock */
+			};
+
+			network_clock@1 {
+				compatible = "zarlink,zl30343";
+				reg = <1>;
+				spi-max-frequency = <8000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,m25p32";
+				reg = <2>;
+				spi-max-frequency = <15000000>;
+			};
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+
+		sata@220000 {
+			status = "disabled";
+		};
+
+		sata@221000 {
+			status = "disabled";
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		status = "disabled";
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xffa00000 0x00040000		/* LB 0 */
+			  1 0 0xf 0xfb000000 0x00010000		/* LB 1 */
+			  2 0 0xf 0xd0000000 0x10000000		/* LB 2 */
+			  3 0 0xf 0xe0000000 0x10000000>;	/* LB 3 */
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0 0 0x40000>;
+		};
+
+		board-control@1,0 {
+			compatible = "keymile,qriox";
+			reg = <1 0 0x80>;
+		};
+
+		chassis-mgmt@3,0 {
+			compatible = "keymile,bfticu";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <3 0 0x100>;
+			interrupt-parent = <&mpic>;
+			interrupts = <6 1 0 0>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "fsl/p2041si-post.dtsi"
diff --git a/src/powerpc/oca4080.dts b/src/powerpc/oca4080.dts
new file mode 100644
index 000000000000..3d4c751d1608
--- /dev/null
+++ b/src/powerpc/oca4080.dts
@@ -0,0 +1,118 @@
+/*
+ * OCA4080 Device Tree Source
+ *
+ * Copyright 2014 Prodrive Technologies B.V.
+ *
+ * Based on:
+ * P4080DS Device Tree Source
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p4080si-pre.dtsi"
+
+/ {
+	model = "fsl,OCA4080";
+	compatible = "fsl,OCA4080";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		i2c@118000 {
+			status = "disabled";
+		};
+
+		i2c@118100 {
+			status = "disabled";
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xef800000 0x800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		status = "disabled";
+	};
+};
+
+/include/ "fsl/p4080si-post.dtsi"
diff --git a/src/powerpc/t1040qds.dts b/src/powerpc/t1040qds.dts
new file mode 100644
index 000000000000..973c29c2f56e
--- /dev/null
+++ b/src/powerpc/t1040qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T1040QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+	model = "fsl,T1040QDS";
+	compatible = "fsl,T1040QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+/include/ "fsl/t1040si-post.dtsi"
diff --git a/src/powerpc/t1042qds.dts b/src/powerpc/t1042qds.dts
new file mode 100644
index 000000000000..45bd03752154
--- /dev/null
+++ b/src/powerpc/t1042qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T1042QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+	model = "fsl,T1042QDS";
+	compatible = "fsl,T1042QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+/include/ "fsl/t1042si-post.dtsi"
diff --git a/src/powerpc/t104xqds.dtsi b/src/powerpc/t104xqds.dtsi
new file mode 100644
index 000000000000..234f4b596c5b
--- /dev/null
+++ b/src/powerpc/t104xqds.dtsi
@@ -0,0 +1,166 @@
+/*
+ * T104xQDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T1040QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			pca9547@77 {
+				compatible = "philips,pca9547";
+				reg = <0x77>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
diff --git a/src/powerpc/t2080qds.dts b/src/powerpc/t2080qds.dts
new file mode 100644
index 000000000000..aa1d6d8c169b
--- /dev/null
+++ b/src/powerpc/t2080qds.dts
@@ -0,0 +1,57 @@
+/*
+ * T2080QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xqds.dtsi"
+
+/ {
+	model = "fsl,T2080QDS";
+	compatible = "fsl,T2080QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+/include/ "fsl/t2080si-post.dtsi"
diff --git a/src/powerpc/t2080rdb.dts b/src/powerpc/t2080rdb.dts
new file mode 100644
index 000000000000..e8891047600c
--- /dev/null
+++ b/src/powerpc/t2080rdb.dts
@@ -0,0 +1,57 @@
+/*
+ * T2080PCIe-RDB Board Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xrdb.dtsi"
+
+/ {
+	model = "fsl,T2080RDB";
+	compatible = "fsl,T2080RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+/include/ "fsl/t2080si-post.dtsi"
diff --git a/src/powerpc/t2081qds.dts b/src/powerpc/t2081qds.dts
new file mode 100644
index 000000000000..8ec80a71e102
--- /dev/null
+++ b/src/powerpc/t2081qds.dts
@@ -0,0 +1,46 @@
+/*
+ * T2081QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t208xsi-pre.dtsi"
+/include/ "t208xqds.dtsi"
+
+/ {
+	model = "fsl,T2081QDS";
+	compatible = "fsl,T2081QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+/include/ "fsl/t2081si-post.dtsi"
diff --git a/src/powerpc/t208xqds.dtsi b/src/powerpc/t208xqds.dtsi
new file mode 100644
index 000000000000..555dc6e03d89
--- /dev/null
+++ b/src/powerpc/t208xqds.dtsi
@@ -0,0 +1,239 @@
+/*
+ * T2080/T2081 QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T2080QDS";
+	compatible = "fsl,T2080QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		boardctrl: board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11"; /* 16MB */
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+
+			flash@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040";
+				reg = <1>;
+				spi-max-frequency = <35000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "eon,en25s64";
+				reg = <2>;
+				spi-max-frequency = <35000000>;
+			};
+		};
+
+		i2c@118000 {
+			pca9547@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "at24,24c512";
+						reg = <0x50>;
+					};
+
+					eeprom@51 {
+						compatible = "at24,24c02";
+						reg = <0x51>;
+					};
+
+					eeprom@57 {
+						compatible = "at24,24c02";
+						reg = <0x57>;
+					};
+
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+						interrupts = <0x1 0x1 0 0>;
+					};
+				};
+
+				i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+
+					eeprom@55 {
+						compatible = "at24,24c02";
+						reg = <0x55>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+
+					ina220@41 {
+						compatible = "ti,ina220";
+						reg = <0x41>;
+						shunt-resistor = <1000>;
+					};
+				};
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
diff --git a/src/powerpc/t208xrdb.dtsi b/src/powerpc/t208xrdb.dtsi
new file mode 100644
index 000000000000..1481e192e783
--- /dev/null
+++ b/src/powerpc/t208xrdb.dtsi
@@ -0,0 +1,184 @@
+/*
+ * T2080PCIe-RDB Board Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T2080RDB";
+	compatible = "fsl,T2080RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		boardctrl: board-control@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,t2080-cpld";
+			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512a";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			adt7481@4c {
+				compatible = "adi,adt7481";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c256";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@118100 {
+			pca9546@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
diff --git a/src/powerpc/t4240rdb.dts b/src/powerpc/t4240rdb.dts
new file mode 100644
index 000000000000..53761d4e8c51
--- /dev/null
+++ b/src/powerpc/t4240rdb.dts
@@ -0,0 +1,186 @@
+/*
+ * T4240RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t4240si-pre.dtsi"
+
+/ {
+	model = "fsl,T4240RDB";
+	compatible = "fsl,T4240RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			eeprom@52 {
+				compatible = "at24,24c256";
+				reg = <0x52>;
+			};
+			eeprom@54 {
+				compatible = "at24,24c256";
+				reg = <0x54>;
+			};
+			eeprom@56 {
+				compatible = "at24,24c256";
+				reg = <0x56>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+
+		sdhc@114000 {
+			voltage-ranges = <1800 1800 3300 3300>;
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+		port2 {
+			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+		};
+	};
+};
+
+/include/ "fsl/t4240si-post.dtsi"
diff --git a/src/xtensa/kc705.dts b/src/xtensa/kc705.dts
new file mode 100644
index 000000000000..742a347be67a
--- /dev/null
+++ b/src/xtensa/kc705.dts
@@ -0,0 +1,11 @@
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-128m.dtsi"
+
+/ {
+	compatible = "cdns,xtensa-kc705";
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
diff --git a/src/xtensa/xtfpga-flash-128m.dtsi b/src/xtensa/xtfpga-flash-128m.dtsi
new file mode 100644
index 000000000000..d3a88e029873
--- /dev/null
+++ b/src/xtensa/xtfpga-flash-128m.dtsi
@@ -0,0 +1,28 @@
+/ {
+	soc {
+		flash: flash@00000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x00000000 0x08000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			partition@0x0 {
+				label = "data";
+				reg = <0x00000000 0x06000000>;
+			};
+			partition@0x6000000 {
+				label = "boot loader area";
+				reg = <0x06000000 0x00800000>;
+			};
+			partition@0x6800000 {
+				label = "kernel image";
+				reg = <0x06800000 0x017e0000>;
+			};
+			partition@0x7fe0000 {
+				label = "boot environment";
+				reg = <0x07fe0000 0x00020000>;
+			};
+		};
+        };
+};
diff --git a/testcase-data/testcases.dts b/testcase-data/testcases.dts
new file mode 100644
index 000000000000..219ef9324e9c
--- /dev/null
+++ b/testcase-data/testcases.dts
@@ -0,0 +1,15 @@
+/dts-v1/;
+/ {
+	testcase-data {
+		changeset {
+			prop-update = "hello";
+			prop-remove = "world";
+			node-remove {
+			};
+		};
+	};
+};
+#include "tests-phandle.dtsi"
+#include "tests-interrupts.dtsi"
+#include "tests-match.dtsi"
+#include "tests-platform.dtsi"
diff --git a/testcase-data/tests-platform.dtsi b/testcase-data/tests-platform.dtsi
new file mode 100644
index 000000000000..eb20eeb2b062
--- /dev/null
+++ b/testcase-data/tests-platform.dtsi
@@ -0,0 +1,35 @@
+
+/ {
+	testcase-data {
+		platform-tests {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			test-device@0 {
+				compatible = "test-device";
+				reg = <0x0>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dev@100 {
+					compatible = "test-sub-device";
+					reg = <0x100>;
+				};
+			};
+
+			test-device@1 {
+				compatible = "test-device";
+				reg = <0x1>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dev@100 {
+					compatible = "test-sub-device";
+					reg = <0x100>;
+				};
+			};
+		};
+	};
+};