Properly trim the vendor tree to include only those files that we want

merged into FreeBSD. Cherry picking from a full vendor tree was too
hard and lead to undestirable svn results.

Note: We only tim the dts* files, we don't trim the dt-bindings tree,
since having all of them causes no problems and the benefit to
trimming there is far out weighed by the cost of doing the trim each
time.

1079 files changed, 0 insertions, 244222 deletions

diff --git a/src/arc/abilis_tb100.dtsi b/src/arc/abilis_tb100.dtsi
deleted file mode 100644
index 3942634f805a..000000000000
--- a/src/arc/abilis_tb100.dtsi
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Abilis Systems TB100 SOC device tree
- *
- * Copyright (C) Abilis Systems 2013
- *
- * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-/include/ "abilis_tb10x.dtsi"
-
-
-/ {
-	clock-frequency		= <500000000>;	/* 500 MHZ */
-
-	soc100 {
-		bus-frequency	= <166666666>;
-
-		pll0: oscillator {
-			clock-frequency  = <1000000000>;
-		};
-		cpu_clk: clkdiv_cpu {
-			clock-mult = <1>;
-			clock-div = <2>;
-		};
-		ahb_clk: clkdiv_ahb {
-			clock-mult = <1>;
-			clock-div = <6>;
-		};
-
-		iomux: iomux@FF10601c {
-			/* Port 1 */
-			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
-				abilis,function = "mis0";
-			};
-			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
-				abilis,function = "mis1";
-			};
-			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
-				abilis,function = "gpioa";
-			};
-			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
-				abilis,function = "mip1";
-			};
-			/* Port 2 */
-			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
-				abilis,function = "mis2";
-			};
-			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
-				abilis,function = "mis3";
-			};
-			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
-				abilis,function = "gpioc";
-			};
-			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
-				abilis,function = "mip3";
-			};
-			/* Port 3 */
-			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
-				abilis,function = "mis4";
-			};
-			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
-				abilis,function = "mis5";
-			};
-			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
-				abilis,function = "gpioe";
-			};
-			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
-				abilis,function = "mip5";
-			};
-			/* Port 4 */
-			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
-				abilis,function = "mis6";
-			};
-			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
-				abilis,function = "mis7";
-			};
-			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
-				abilis,function = "gpiog";
-			};
-			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
-				abilis,function = "mip7";
-			};
-			/* Port 5 */
-			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
-				abilis,function = "gpioj";
-			};
-			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
-				abilis,function = "gpiok";
-			};
-			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
-				abilis,function = "ciplus";
-			};
-			pctl_mcard: pctl-mcard {       /* M-Card interface */
-				abilis,function = "mcard";
-			};
-			/* Port 6 */
-			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
-				abilis,function = "mop";
-			};
-			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
-				abilis,function = "mos0";
-			};
-			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
-				abilis,function = "mos1";
-			};
-			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
-				abilis,function = "mos2";
-			};
-			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
-				abilis,function = "mos3";
-			};
-			/* Port 7 */
-			pctl_uart0: pctl-uart0 {       /* UART 0 */
-				abilis,function = "uart0";
-			};
-			pctl_uart1: pctl-uart1 {       /* UART 1 */
-				abilis,function = "uart1";
-			};
-			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
-				abilis,function = "gpiol";
-			};
-			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
-				abilis,function = "gpiom";
-			};
-			/* Port 8 */
-			pctl_spi3: pctl-spi3 {
-				abilis,function = "spi3";
-			};
-			/* Port 9 */
-			pctl_spi1: pctl-spi1 {
-				abilis,function = "spi1";
-			};
-			pctl_gpio_n: pctl-gpio-n {
-				abilis,function = "gpion";
-			};
-			/* Unmuxed GPIOs */
-			pctl_gpio_b: pctl-gpio-b {
-				abilis,function = "gpiob";
-			};
-			pctl_gpio_d: pctl-gpio-d {
-				abilis,function = "gpiod";
-			};
-			pctl_gpio_f: pctl-gpio-f {
-				abilis,function = "gpiof";
-			};
-			pctl_gpio_h: pctl-gpio-h {
-				abilis,function = "gpioh";
-			};
-			pctl_gpio_i: pctl-gpio-i {
-				abilis,function = "gpioi";
-			};
-		};
-
-		gpioa: gpio@FF140000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF140000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <3>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioa";
-		};
-		gpiob: gpio@FF141000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF141000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <2>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiob";
-		};
-		gpioc: gpio@FF142000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF142000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <3>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioc";
-		};
-		gpiod: gpio@FF143000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF143000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <2>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiod";
-		};
-		gpioe: gpio@FF144000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF144000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <3>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioe";
-		};
-		gpiof: gpio@FF145000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF145000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <2>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiof";
-		};
-		gpiog: gpio@FF146000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF146000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <3>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiog";
-		};
-		gpioh: gpio@FF147000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF147000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <2>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioh";
-		};
-		gpioi: gpio@FF148000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF148000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <12>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioi";
-		};
-		gpioj: gpio@FF149000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF149000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <32>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioj";
-		};
-		gpiok: gpio@FF14a000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF14A000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <22>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiok";
-		};
-		gpiol: gpio@FF14b000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF14B000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <4>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiol";
-		};
-		gpiom: gpio@FF14c000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF14C000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <4>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiom";
-		};
-		gpion: gpio@FF14d000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF14D000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <5>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpion";
-		};
-	};
-};
diff --git a/src/arc/abilis_tb100_dvk.dts b/src/arc/abilis_tb100_dvk.dts
deleted file mode 100644
index 3dd6ed941464..000000000000
--- a/src/arc/abilis_tb100_dvk.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Abilis Systems TB100 Development Kit PCB device tree
- *
- * Copyright (C) Abilis Systems 2013
- *
- * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-/dts-v1/;
-
-/include/ "abilis_tb100.dtsi"
-
-/ {
-	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
-	};
-
-	aliases { };
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x08000000>;	/* 128M */
-	};
-
-	soc100 {
-		uart@FF100000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pctl_uart0>;
-		};
-		ethernet@FE100000 {
-			phy-mode = "rgmii";
-		};
-
-		i2c0: i2c@FF120000 {
-			i2c-sda-hold-time-ns = <432>;
-		};
-		i2c1: i2c@FF121000 {
-			i2c-sda-hold-time-ns = <432>;
-		};
-		i2c2: i2c@FF122000 {
-			i2c-sda-hold-time-ns = <432>;
-		};
-		i2c3: i2c@FF123000 {
-			i2c-sda-hold-time-ns = <432>;
-		};
-		i2c4: i2c@FF124000 {
-			i2c-sda-hold-time-ns = <432>;
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			power {
-				label = "Power";
-				gpios = <&gpioi 0 0>;
-				linux,default-trigger = "default-on";
-			};
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&gpioi 1 0>;
-				linux,default-trigger = "heartbeat";
-			};
-			led2 {
-				label = "LED2";
-				gpios = <&gpioi 2 0>;
-				default-state = "off";
-			};
-			led3 {
-				label = "LED3";
-				gpios = <&gpioi 3 0>;
-				default-state = "off";
-			};
-			led4 {
-				label = "LED4";
-				gpios = <&gpioi 4 0>;
-				default-state = "off";
-			};
-			led5 {
-				label = "LED5";
-				gpios = <&gpioi 5 0>;
-				default-state = "off";
-			};
-			led6 {
-				label = "LED6";
-				gpios = <&gpioi 6 0>;
-				default-state = "off";
-			};
-			led7 {
-				label = "LED7";
-				gpios = <&gpioi 7 0>;
-				default-state = "off";
-			};
-			led8 {
-				label = "LED8";
-				gpios = <&gpioi 8 0>;
-				default-state = "off";
-			};
-			led9 {
-				label = "LED9";
-				gpios = <&gpioi 9 0>;
-				default-state = "off";
-			};
-			led10 {
-				label = "LED10";
-				gpios = <&gpioi 10 0>;
-				default-state = "off";
-			};
-			led11 {
-				label = "LED11";
-				gpios = <&gpioi 11 0>;
-				default-state = "off";
-			};
-		};
-	};
-};
diff --git a/src/arc/abilis_tb101.dtsi b/src/arc/abilis_tb101.dtsi
deleted file mode 100644
index b0467229a5c4..000000000000
--- a/src/arc/abilis_tb101.dtsi
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Abilis Systems TB101 SOC device tree
- *
- * Copyright (C) Abilis Systems 2013
- *
- * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-/include/ "abilis_tb10x.dtsi"
-
-
-/ {
-	clock-frequency		= <500000000>;	/* 500 MHZ */
-
-	soc100 {
-		bus-frequency	= <166666666>;
-
-		pll0: oscillator {
-			clock-frequency  = <1000000000>;
-		};
-		cpu_clk: clkdiv_cpu {
-			clock-mult = <1>;
-			clock-div = <2>;
-		};
-		ahb_clk: clkdiv_ahb {
-			clock-mult = <1>;
-			clock-div = <6>;
-		};
-
-		iomux: iomux@FF10601c {
-			/* Port 1 */
-			pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
-				abilis,function = "mis0";
-			};
-			pctl_tsin_s1: pctl-tsin-s1 {   /* Serial TS-in 1 */
-				abilis,function = "mis1";
-			};
-			pctl_gpio_a: pctl-gpio-a {     /* GPIO bank A */
-				abilis,function = "gpioa";
-			};
-			pctl_tsin_p1: pctl-tsin-p1 {   /* Parallel TS-in 1 */
-				abilis,function = "mip1";
-			};
-			/* Port 2 */
-			pctl_tsin_s2: pctl-tsin-s2 {   /* Serial TS-in 2 */
-				abilis,function = "mis2";
-			};
-			pctl_tsin_s3: pctl-tsin-s3 {   /* Serial TS-in 3 */
-				abilis,function = "mis3";
-			};
-			pctl_gpio_c: pctl-gpio-c {     /* GPIO bank C */
-				abilis,function = "gpioc";
-			};
-			pctl_tsin_p3: pctl-tsin-p3 {   /* Parallel TS-in 3 */
-				abilis,function = "mip3";
-			};
-			/* Port 3 */
-			pctl_tsin_s4: pctl-tsin-s4 {   /* Serial TS-in 4 */
-				abilis,function = "mis4";
-			};
-			pctl_tsin_s5: pctl-tsin-s5 {   /* Serial TS-in 5 */
-				abilis,function = "mis5";
-			};
-			pctl_gpio_e: pctl-gpio-e {     /* GPIO bank E */
-				abilis,function = "gpioe";
-			};
-			pctl_tsin_p5: pctl-tsin-p5 {   /* Parallel TS-in 5 */
-				abilis,function = "mip5";
-			};
-			/* Port 4 */
-			pctl_tsin_s6: pctl-tsin-s6 {   /* Serial TS-in 6 */
-				abilis,function = "mis6";
-			};
-			pctl_tsin_s7: pctl-tsin-s7 {   /* Serial TS-in 7 */
-				abilis,function = "mis7";
-			};
-			pctl_gpio_g: pctl-gpio-g {     /* GPIO bank G */
-				abilis,function = "gpiog";
-			};
-			pctl_tsin_p7: pctl-tsin-p7 {   /* Parallel TS-in 7 */
-				abilis,function = "mip7";
-			};
-			/* Port 5 */
-			pctl_gpio_j: pctl-gpio-j {     /* GPIO bank J */
-				abilis,function = "gpioj";
-			};
-			pctl_gpio_k: pctl-gpio-k {     /* GPIO bank K */
-				abilis,function = "gpiok";
-			};
-			pctl_ciplus: pctl-ciplus {     /* CI+ interface */
-				abilis,function = "ciplus";
-			};
-			pctl_mcard: pctl-mcard {       /* M-Card interface */
-				abilis,function = "mcard";
-			};
-			pctl_stc0: pctl-stc0 {         /* Smart card I/F 0 */
-				abilis,function = "stc0";
-			};
-			pctl_stc1: pctl-stc1 {         /* Smart card I/F 1 */
-				abilis,function = "stc1";
-			};
-			/* Port 6 */
-			pctl_tsout_p: pctl-tsout-p {   /* Parallel TS-out */
-				abilis,function = "mop";
-			};
-			pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */
-				abilis,function = "mos0";
-			};
-			pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */
-				abilis,function = "mos1";
-			};
-			pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */
-				abilis,function = "mos2";
-			};
-			pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */
-				abilis,function = "mos3";
-			};
-			/* Port 7 */
-			pctl_uart0: pctl-uart0 {       /* UART 0 */
-				abilis,function = "uart0";
-			};
-			pctl_uart1: pctl-uart1 {       /* UART 1 */
-				abilis,function = "uart1";
-			};
-			pctl_gpio_l: pctl-gpio-l {     /* GPIO bank L */
-				abilis,function = "gpiol";
-			};
-			pctl_gpio_m: pctl-gpio-m {     /* GPIO bank M */
-				abilis,function = "gpiom";
-			};
-			/* Port 8 */
-			pctl_spi3: pctl-spi3 {
-				abilis,function = "spi3";
-			};
-			pctl_jtag: pctl-jtag {
-				abilis,function = "jtag";
-			};
-			/* Port 9 */
-			pctl_spi1: pctl-spi1 {
-				abilis,function = "spi1";
-			};
-			pctl_gpio_n: pctl-gpio-n {
-				abilis,function = "gpion";
-			};
-			/* Unmuxed GPIOs */
-			pctl_gpio_b: pctl-gpio-b {
-				abilis,function = "gpiob";
-			};
-			pctl_gpio_d: pctl-gpio-d {
-				abilis,function = "gpiod";
-			};
-			pctl_gpio_f: pctl-gpio-f {
-				abilis,function = "gpiof";
-			};
-			pctl_gpio_h: pctl-gpio-h {
-				abilis,function = "gpioh";
-			};
-			pctl_gpio_i: pctl-gpio-i {
-				abilis,function = "gpioi";
-			};
-		};
-
-		gpioa: gpio@FF140000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF140000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <3>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioa";
-		};
-		gpiob: gpio@FF141000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF141000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <2>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiob";
-		};
-		gpioc: gpio@FF142000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF142000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <3>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioc";
-		};
-		gpiod: gpio@FF143000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF143000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <2>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiod";
-		};
-		gpioe: gpio@FF144000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF144000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <3>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioe";
-		};
-		gpiof: gpio@FF145000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF145000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <2>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiof";
-		};
-		gpiog: gpio@FF146000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF146000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <3>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiog";
-		};
-		gpioh: gpio@FF147000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF147000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <2>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioh";
-		};
-		gpioi: gpio@FF148000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF148000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <12>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioi";
-		};
-		gpioj: gpio@FF149000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF149000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <32>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpioj";
-		};
-		gpiok: gpio@FF14a000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF14A000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <22>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiok";
-		};
-		gpiol: gpio@FF14b000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF14B000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <4>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiol";
-		};
-		gpiom: gpio@FF14c000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF14C000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <4>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpiom";
-		};
-		gpion: gpio@FF14d000 {
-			compatible = "abilis,tb10x-gpio";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 2>;
-			reg = <0xFF14D000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			abilis,ngpio = <5>;
-			gpio-ranges = <&iomux 0 0 0>;
-			gpio-ranges-group-names = "gpion";
-		};
-	};
-};
diff --git a/src/arc/abilis_tb101_dvk.dts b/src/arc/abilis_tb101_dvk.dts
deleted file mode 100644
index 1cf51c280f28..000000000000
--- a/src/arc/abilis_tb101_dvk.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Abilis Systems TB101 Development Kit PCB device tree
- *
- * Copyright (C) Abilis Systems 2013
- *
- * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-/dts-v1/;
-
-/include/ "abilis_tb101.dtsi"
-
-/ {
-	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
-	};
-
-	aliases { };
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x08000000>;	/* 128M */
-	};
-
-	soc100 {
-		uart@FF100000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pctl_uart0>;
-		};
-		ethernet@FE100000 {
-			phy-mode = "rgmii";
-		};
-
-		i2c0: i2c@FF120000 {
-			i2c-sda-hold-time-ns = <432>;
-		};
-		i2c1: i2c@FF121000 {
-			i2c-sda-hold-time-ns = <432>;
-		};
-		i2c2: i2c@FF122000 {
-			i2c-sda-hold-time-ns = <432>;
-		};
-		i2c3: i2c@FF123000 {
-			i2c-sda-hold-time-ns = <432>;
-		};
-		i2c4: i2c@FF124000 {
-			i2c-sda-hold-time-ns = <432>;
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			power {
-				label = "Power";
-				gpios = <&gpioi 0 0>;
-				linux,default-trigger = "default-on";
-			};
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&gpioi 1 0>;
-				linux,default-trigger = "heartbeat";
-			};
-			led2 {
-				label = "LED2";
-				gpios = <&gpioi 2 0>;
-				default-state = "off";
-			};
-			led3 {
-				label = "LED3";
-				gpios = <&gpioi 3 0>;
-				default-state = "off";
-			};
-			led4 {
-				label = "LED4";
-				gpios = <&gpioi 4 0>;
-				default-state = "off";
-			};
-			led5 {
-				label = "LED5";
-				gpios = <&gpioi 5 0>;
-				default-state = "off";
-			};
-			led6 {
-				label = "LED6";
-				gpios = <&gpioi 6 0>;
-				default-state = "off";
-			};
-			led7 {
-				label = "LED7";
-				gpios = <&gpioi 7 0>;
-				default-state = "off";
-			};
-			led8 {
-				label = "LED8";
-				gpios = <&gpioi 8 0>;
-				default-state = "off";
-			};
-			led9 {
-				label = "LED9";
-				gpios = <&gpioi 9 0>;
-				default-state = "off";
-			};
-			led10 {
-				label = "LED10";
-				gpios = <&gpioi 10 0>;
-				default-state = "off";
-			};
-			led11 {
-				label = "LED11";
-				gpios = <&gpioi 11 0>;
-				default-state = "off";
-			};
-		};
-	};
-};
diff --git a/src/arc/abilis_tb10x.dtsi b/src/arc/abilis_tb10x.dtsi
deleted file mode 100644
index a098d7c05e96..000000000000
--- a/src/arc/abilis_tb10x.dtsi
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Abilis Systems TB10X SOC device tree
- *
- * Copyright (C) Abilis Systems 2013
- *
- * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-
-/ {
-	compatible		= "abilis,arc-tb10x";
-	#address-cells		= <1>;
-	#size-cells		= <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "snps,arc770d";
-			reg = <0>;
-		};
-	};
-
-	soc100 {
-		#address-cells	= <1>;
-		#size-cells	= <1>;
-		device_type	= "soc";
-		ranges		= <0xfe000000 0xfe000000 0x02000000
-				0x000F0000 0x000F0000 0x00010000>;
-		compatible	= "abilis,tb10x", "simple-bus";
-
-		pll0: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-output-names = "pll0";
-		};
-		cpu_clk: clkdiv_cpu {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&pll0>;
-			clock-output-names = "cpu_clk";
-		};
-		ahb_clk: clkdiv_ahb {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clocks = <&pll0>;
-			clock-output-names = "ahb_clk";
-		};
-
-		iomux: iomux@FF10601c {
-			compatible = "abilis,tb10x-iomux";
-			#gpio-range-cells = <3>;
-			reg = <0xFF10601c 0x4>;
-		};
-
-		intc: interrupt-controller {
-			compatible = "snps,arc700-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-		tb10x_ictl: pic@fe002000 {
-			compatible = "abilis,tb10x-ictl";
-			reg = <0xFE002000 0x20>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
-					20 21 22 23 24 25 26 27 28 29 30 31>;
-		};
-
-		uart@FF100000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0xFF100000 0x100>;
-			clock-frequency = <166666666>;
-			interrupts = <25 8>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupt-parent = <&tb10x_ictl>;
-		};
-		ethernet@FE100000 {
-			compatible = "snps,dwmac-3.70a","snps,dwmac";
-			reg = <0xFE100000 0x1058>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <6 8>;
-			interrupt-names = "macirq";
-			clocks = <&ahb_clk>;
-			clock-names = "stmmaceth";
-		};
-		dma@FE000000 {
-			compatible = "snps,dma-spear1340";
-			reg = <0xFE000000 0x400>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <14 8>;
-			dma-channels = <6>;
-			dma-requests = <0>;
-			dma-masters = <1>;
-			#dma-cells = <3>;
-			chan_allocation_order = <0>;
-			chan_priority = <1>;
-			block_size = <0x7ff>;
-			data_width = <2 0 0 0>;
-			clocks = <&ahb_clk>;
-			clock-names = "hclk";
-		};
-
-		i2c0: i2c@FF120000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xFF120000 0x1000>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <12 8>;
-			clocks = <&ahb_clk>;
-		};
-		i2c1: i2c@FF121000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xFF121000 0x1000>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <12 8>;
-			clocks = <&ahb_clk>;
-		};
-		i2c2: i2c@FF122000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xFF122000 0x1000>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <12 8>;
-			clocks = <&ahb_clk>;
-		};
-		i2c3: i2c@FF123000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xFF123000 0x1000>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <12 8>;
-			clocks = <&ahb_clk>;
-		};
-		i2c4: i2c@FF124000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xFF124000 0x1000>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <12 8>;
-			clocks = <&ahb_clk>;
-		};
-
-		spi0: spi@0xFE010000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "abilis,tb100-spi";
-			num-cs = <1>;
-			reg = <0xFE010000 0x20>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <26 8>;
-			clocks = <&ahb_clk>;
-		};
-		spi1: spi@0xFE011000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "abilis,tb100-spi";
-			num-cs = <2>;
-			reg = <0xFE011000 0x20>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <10 8>;
-			clocks = <&ahb_clk>;
-		};
-
-		tb10x_tsm: tb10x-tsm@ff316000 {
-			compatible = "abilis,tb100-tsm";
-			reg = <0xff316000 0x400>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <17 8>;
-			output-clkdiv = <4>;
-			global-packet-delay = <0x21>;
-			port-packet-delay = <0>;
-		};
-		tb10x_stream_proc: tb10x-stream-proc {
-			compatible = "abilis,tb100-streamproc";
-			reg =   <0xfff00000 0x200>,
-				<0x000f0000 0x10000>,
-				<0xfff00200 0x105>,
-				<0xff10600c 0x1>,
-				<0xfe001018 0x1>;
-			reg-names =     "mbox",
-					"sp_iccm",
-					"mbox_irq",
-					"cpuctrl",
-					"a6it_int_force";
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <20 2>, <19 2>;
-			interrupt-names = "cmd_irq", "event_irq";
-		};
-		tb10x_mdsc0: tb10x-mdscr@FF300000 {
-			compatible = "abilis,tb100-mdscr";
-			reg = <0xFF300000 0x7000>;
-			tb100-mdscr-manage-tsin;
-		};
-		tb10x_mscr0: tb10x-mdscr@FF307000 {
-			compatible = "abilis,tb100-mdscr";
-			reg = <0xFF307000 0x7000>;
-		};
-		tb10x_scr0: tb10x-mdscr@ff30e000 {
-			compatible = "abilis,tb100-mdscr";
-			reg = <0xFF30e000 0x4000>;
-			tb100-mdscr-manage-tsin;
-		};
-		tb10x_scr1: tb10x-mdscr@ff312000 {
-			compatible = "abilis,tb100-mdscr";
-			reg = <0xFF312000 0x4000>;
-			tb100-mdscr-manage-tsin;
-		};
-		tb10x_wfb: tb10x-wfb@ff319000 {
-			compatible = "abilis,tb100-wfb";
-			reg = <0xff319000 0x1000>;
-			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <16 8>;
-		};
-	};
-};
diff --git a/src/arc/angel4.dts b/src/arc/angel4.dts
deleted file mode 100644
index 6b57475967a6..000000000000
--- a/src/arc/angel4.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "snps,arc-angel4";
-	clock-frequency = <80000000>;	/* 80 MHZ */
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
-	};
-
-	aliases {
-		serial0 = &arcuart0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	/* 256M */
-	};
-
-	fpga {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* child and parent address space 1:1 mapped */
-		ranges;
-
-		intc: interrupt-controller {
-			compatible = "snps,arc700-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		arcuart0: serial@c0fc1000 {
-			compatible = "snps,arc-uart";
-			reg = <0xc0fc1000 0x100>;
-			interrupts = <5>;
-			clock-frequency = <80000000>;
-			current-speed = <115200>;
-			status = "okay";
-		};
-
-		ethernet@c0fc2000 {
-			compatible = "snps,arc-emac";
-			reg = <0xc0fc2000 0x3c>;
-			interrupts = <6>;
-			mac-address = [ 00 11 22 33 44 55 ];
-			clock-frequency = <80000000>;
-			max-speed = <100>;
-			phy = <&phy0>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-			};
-		};
-
-		arcpmu0: pmu {
-			compatible = "snps,arc700-pmu";
-		};
-	};
-};
diff --git a/src/arc/nsimosci.dts b/src/arc/nsimosci.dts
deleted file mode 100644
index 4f31b2eb5cdf..000000000000
--- a/src/arc/nsimosci.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "snps,nsimosci";
-	clock-frequency = <20000000>;	/* 20 MHZ */
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	chosen {
-		/* this is for console on PGU */
-		/* bootargs = "console=tty0 consoleblank=0"; */
-		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=ttyS0,115200n8 consoleblank=0 debug";
-	};
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256M */
-	};
-
-	fpga {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* child and parent address space 1:1 mapped */
-		ranges;
-
-		intc: interrupt-controller {
-			compatible = "snps,arc700-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		uart0: serial@c0000000 {
-			compatible = "ns8250";
-			reg = <0xc0000000 0x2000>;
-			interrupts = <11>;
-			clock-frequency = <3686400>;
-			baud = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			no-loopback-test = <1>;
-		};
-
-		pgu0: pgu@c9000000 {
-			compatible = "snps,arcpgufb";
-			reg = <0xc9000000 0x400>;
-		};
-
-		ps2: ps2@c9001000 {
-			compatible = "snps,arc_ps2";
-			reg = <0xc9000400 0x14>;
-			interrupts = <13>;
-			interrupt-names = "arc_ps2_irq";
-		};
-
-		eth0: ethernet@c0003000 {
-			compatible = "snps,oscilan";
-			reg = <0xc0003000 0x44>;
-			interrupts = <7>, <8>;
-			interrupt-names = "rx", "tx";
-		};
-	};
-};
diff --git a/src/arc/skeleton.dts b/src/arc/skeleton.dts
deleted file mode 100644
index 25a84fb5b3dc..000000000000
--- a/src/arc/skeleton.dts
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
diff --git a/src/arc/skeleton.dtsi b/src/arc/skeleton.dtsi
deleted file mode 100644
index a870bdd5e404..000000000000
--- a/src/arc/skeleton.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Skeleton device tree; the bare minimum needed to boot; just include and
- * add a compatible value.
- */
-
-/ {
-	compatible = "snps,arc";
-	clock-frequency = <80000000>;	/* 80 MHZ */
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-	aliases { };
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "snps,arc770d";
-			reg = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	/* 256M */
-	};
-};
diff --git a/src/arm/aks-cdu.dts b/src/arm/aks-cdu.dts
deleted file mode 100644
index d9c50fbb49d2..000000000000
--- a/src/arm/aks-cdu.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * aks-cdu.dts - Device Tree file for AK signal CDU
- *
- * Copyright (C) 2012 AK signal Brno a.s.
- *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-#include "ge863-pro3.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-	};
-
-	ahb {
-		apb {
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-				};
-
-			usart2: serial@fffb8000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			uboot@40000 {
-				label = "uboot";
-				reg = <0x40000 0x80000>;
-			};
-			ubootenv@c0000 {
-				label = "ubootenv";
-				reg = <0xc0000 0x40000>;
-			};
-			kernel@100000 {
-				label = "kernel";
-				reg = <0x100000 0x400000>;
-			};
-			rootfs@500000 {
-				label = "rootfs";
-				reg = <0x500000 0x7b00000>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-		};
-
-		green {
-			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		yellow {
-			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		blue {
-			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-};
diff --git a/src/arm/am335x-base0033.dts b/src/arm/am335x-base0033.dts
deleted file mode 100644
index 72a9b3fc4251..000000000000
--- a/src/arm/am335x-base0033.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
- *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "am335x-igep0033.dtsi"
-
-/ {
-	model = "IGEP COM AM335x on AQUILA Expansion";
-	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
-
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_pins>;
-		pinctrl-1 = <&nxp_hdmi_off_pins>;
-		status = "okay";
-	};
-
-	leds_base {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_base_pins>;
-
-		compatible = "gpio-leds";
-
-		led@0 {
-			label = "base:red:user";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
-			default-state = "off";
-		};
-
-		led@1 {
-			label = "base:green:user";
-			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
-		>;
-	};
-	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-		>;
-	};
-
-	leds_base_pins: pinmux_leds_base_pins {
-		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&i2c0 {
-	eeprom: eeprom@50 {
-		compatible = "at,24c256";
-		reg = <0x50>;
-	};
-};
diff --git a/src/arm/am335x-bone-common.dtsi b/src/arm/am335x-bone-common.dtsi
deleted file mode 100644
index bde1777b62be..000000000000
--- a/src/arm/am335x-bone-common.dtsi
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	model = "TI AM335x BeagleBone";
-	compatible = "ti,am335x-bone", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@2 {
-			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led@5 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin>;
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
-		>;
-	};
-
-	emmc_pins: pinmux_emmc_pins {
-		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-always-on;
-		};
-	};
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	bus-width = <0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
-};
diff --git a/src/arm/am335x-bone.dts b/src/arm/am335x-bone.dts
deleted file mode 100644
index 94ee427a6db1..000000000000
--- a/src/arm/am335x-bone.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo3_reg>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
diff --git a/src/arm/am335x-boneblack.dts b/src/arm/am335x-boneblack.dts
deleted file mode 100644
index 305975d3f531..000000000000
--- a/src/arm/am335x-boneblack.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
-		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
-			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-		>;
-	};
-	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
-		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-/ {
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/am335x-evm.dts b/src/arm/am335x-evm.dts
deleted file mode 100644
index e2156a583de7..000000000000
--- a/src/arm/am335x-evm.dts
+++ /dev/null
@@ -1,666 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "TI AM335x EVM";
-	compatible = "ti,am335x-evm", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
-			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
-			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
-
-		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
-			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
-
-		linux,keymap = <0x0000008b	/* MENU */
-				0x0100009e	/* BACK */
-				0x02000069	/* LEFT */
-				0x0001006a	/* RIGHT */
-				0x0101001c	/* ENTER */
-				0x0201006c>;	/* DOWN */
-	};
-
-	gpio_keys: volume_keys@0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		switch@9 {
-			label = "volume-up";
-			linux,code = <115>;
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
-		};
-
-		switch@10 {
-			label = "volume-down";
-			linux,code = <114>;
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 0>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-
-		display-timings {
-			800x480p62 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <12000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT",
-			"LINE1L",               "Line In",
-			"LINE1R",               "Line In";
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
-
-	matrix_keypad_s0: matrix_keypad_s0 {
-		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-
-	volume_keys_s0: volume_keys_s0 {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	nandflash_pins_s0: nandflash_pins_s0 {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	lcd_pins_s0: lcd_pins_s0 {
-		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-	am335x_evm_audio_pins: am335x_evm_audio_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tsl2550: tsl2550@39 {
-		compatible = "taos,tsl2550";
-		reg = <0x39>;
-	};
-
-	tmp275: tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&epwmss0 {
-	status = "okay";
-
-	ecap0: ecap@48300100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-	};
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000C0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001C0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x001E0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00A00000 0x0F600000>;
-		};
-	};
-};
-
-#include "tps65910.dtsi"
-
-&mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&am335x_evm_audio_pins>;
-
-		status = "okay";
-
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
-};
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii-txid";
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
diff --git a/src/arm/am335x-evmsk.dts b/src/arm/am335x-evmsk.dts
deleted file mode 100644
index df5fee6b6b4b..000000000000
--- a/src/arm/am335x-evmsk.dts
+++ /dev/null
@@ -1,680 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * AM335x Starter Kit
- * http://www.ti.com/tool/tmdssk3358
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "TI AM335x EVM-SK";
-	compatible = "ti,am335x-evmsk", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	wl12xx_vmmc: fixedregulator@2 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 29 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@1 {
-			label = "evmsk:green:usr0";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "evmsk:green:usr1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "evmsk:green:mmc0";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "evmsk:green:heartbeat";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	gpio_buttons: gpio_buttons@0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@1 {
-			label = "button0";
-			linux,code = <0x100>;
-			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		switch@2 {
-			label = "button1";
-			linux,code = <0x101>;
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		switch@3 {
-			label = "button2";
-			linux,code = <0x102>;
-			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
-		};
-
-		switch@4 {
-			label = "button3";
-			linux,code = <0x103>;
-			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 58 61 66 75 90 125 170 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVMSK";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&lcd_pins_default>;
-		pinctrl-1 = <&lcd_pins_sleep>;
-		status = "okay";
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-		display-timings {
-			480x272 {
-				hactive         = <480>;
-				vactive         = <272>;
-				hback-porch     = <43>;
-				hfront-porch    = <8>;
-				hsync-len       = <4>;
-				vback-porch     = <12>;
-				vfront-porch    = <4>;
-				vsync-len       = <10>;
-				clock-frequency = <9000000>;
-				hsync-active    = <0>;
-				vsync-active    = <0>;
-			};
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
-
-	lcd_pins_default: lcd_pins_default {
-		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-	lcd_pins_sleep: lcd_pins_sleep {
-		pinctrl-single,pins = <
-			0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
-			0xa4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
-			0xa8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
-			0xac (PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
-			0xb0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
-			0xb4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
-			0xb8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
-			0xbc (PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
-			0xc0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
-			0xc4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
-			0xc8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
-			0xcc (PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
-			0xd0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
-			0xd4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
-			0xd8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
-			0xdc (PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-
-
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
-		>;
-	};
-
-	gpio_keys_s0: gpio_keys_s0 {
-		pinctrl-single,pins = <
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	ecap2_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-
-			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&epwmss2 {
-	status = "okay";
-
-	ecap2: ecap@48304100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap2_pins>;
-	};
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0 {
-	ti,no-reset-on-init;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-
-&mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcasp1_pins>;
-
-		status = "okay";
-
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-};
-
-&lcdc {
-      status = "okay";
-};
diff --git a/src/arm/am335x-igep0033.dtsi b/src/arm/am335x-igep0033.dtsi
deleted file mode 100644
index a1a0cc5eb35c..000000000000
--- a/src/arm/am335x-igep0033.dtsi
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
- *
- * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		compatible = "gpio-leds";
-
-		led@0 {
-			label = "com:green:user";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	vmmc: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	nandflash_pins: pinmux_nandflash_pins {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-		>;
-	};
-};
-
-&mac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rmii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		elm_id = <&elm>;
-
-		/* MTD partition table */
-		partition@0 {
-			label = "SPL";
-			reg = <0x00000000 0x000080000>;
-		};
-
-		partition@1 {
-			label = "U-boot";
-			reg = <0x00080000 0x001e0000>;
-		};
-
-		partition@2 {
-			label = "U-Boot Env";
-			reg = <0x00260000 0x00020000>;
-		};
-
-		partition@3 {
-			label = "Kernel";
-			reg = <0x00280000 0x00500000>;
-		};
-
-		partition@4 {
-			label = "File System";
-			reg = <0x00780000 0x007880000>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmc>;
-	bus-width = <4>;
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-always-on;
-		};
-	};
-};
-
diff --git a/src/arm/am335x-nano.dts b/src/arm/am335x-nano.dts
deleted file mode 100644
index a3466455b171..000000000000
--- a/src/arm/am335x-nano.dts
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "Newflow AM335x NanoBone";
-	compatible = "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led@0 {
-			label = "nanobone:green:usr1";
-			gpios = <&gpio1 5 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&misc_pins>;
-
-	misc_pins: misc_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
-		>;
-	};
-
-	gpmc_pins: gpmc_pins {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
-			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
-			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
-			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
-			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
-			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
-			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
-			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
-			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
-			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
-
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
-
-			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
-			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
-			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
-
-			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
-			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
-			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	uart1_pins: uart1_pins {
-		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
-			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
-		>;
-	};
-
-	uart2_pins: uart2_pins {
-		pinctrl-single,pins = <
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
-			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
-			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
-		>;
-	};
-
-	uart3_pins: uart3_pins {
-		pinctrl-single,pins = <
-			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
-			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
-			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
-			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
-		>;
-	};
-
-	uart4_pins: uart4_pins {
-		pinctrl-single,pins = <
-			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
-			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
-			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
-			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
-		>;
-	};
-
-	uart5_pins: uart5_pins {
-		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
-			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
-		>;
-	};
-
-	mmc1_pins: mmc1_pins {
-		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rx-during-tx;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-	rs485-rts-active-high;
-	rs485-rts-delay = <1 1>;
-	linux,rs485-enabled-at-boot-time;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	gpio@20 {
-		compatible = "mcp,mcp23017";
-		reg = <0x20>;
-	};
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	eeprom@53 {
-		compatible = "mcp,24c02";
-		reg = <0x53>;
-		pagesize = <8>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1307";
-		reg = <0x68>;
-	};
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	compatible = "ti,am3352-gpmc";
-	ti,hwmods = "gpmc";
-	status = "okay";
-	gpmc,num-waitpins = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc_pins>;
-
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <0 0 0x08000000 0x08000000>;	/* CS0: NOR 128M */
-
-	nor@0,0 {
-		reg = <0 0x00000000 0x08000000>;
-		compatible = "cfi-flash";
-		linux,mtd-name = "spansion,s29gl010p11t";
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <160>;
-		gpmc,cs-wr-off-ns = <160>;
-		gpmc,adv-on-ns = <10>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,oe-on-ns = <40>;
-		gpmc,oe-off-ns = <160>;
-		gpmc,we-on-ns = <40>;
-		gpmc,we-off-ns = <160>;
-		gpmc,rd-cycle-ns = <160>;
-		gpmc,wr-cycle-ns = <160>;
-		gpmc,access-ns = <150>;
-		gpmc,page-burst-access-ns = <10>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-delay-ns = <20>;
-		gpmc,wr-data-mux-bus-ns = <70>;
-		gpmc,wr-access-ns = <80>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/*
-		MTD partition table
-		===================
-		+------------+-->0x00000000-> U-Boot start
-		|            |
-		|            |-->0x000BFFFF-> U-Boot end
-		|            |-->0x000C0000-> ENV1 start
-		|            |
-		|            |-->0x000DFFFF-> ENV1 end
-		|            |-->0x000E0000-> ENV2 start
-		|            |
-		|            |-->0x000FFFFF-> ENV2 end
-		|            |-->0x00100000-> Kernel start
-		|            |
-		|            |-->0x004FFFFF-> Kernel end
-		|            |-->0x00500000-> File system start
-		|            |
-		|            |-->0x014FFFFF-> File system end
-		|            |-->0x01500000-> User data start
-		|            |
-		|            |-->0x03FFFFFF-> User data end
-		|            |-->0x04000000-> Data storage start
-		|            |
-		+------------+-->0x08000000-> NOR end (Free end)
-		*/
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x000c0000>; /* 768KB */
-		};
-
-		partition@1 {
-			label = "env1";
-			reg = <0x000c0000 0x00020000>; /* 128KB */
-		};
-
-		partition@2 {
-			label = "env2";
-			reg = <0x000e0000 0x00020000>; /* 128KB */
-		};
-
-		partition@3 {
-			label = "kernel";
-			reg = <0x00100000 0x00400000>; /* 4MB */
-		};
-
-		partition@4 {
-			label = "rootfs";
-			reg = <0x00500000 0x01000000>; /* 16MB */
-		};
-
-		partition@5 {
-			label = "user";
-			reg = <0x01500000 0x02b00000>; /* 43MB */
-		};
-
-		partition@6 {
-			label = "data";
-			reg = <0x04000000 0x04000000>; /* 64MB */
-		};
-	};
-};
-
-&mac {
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	dual_emac_res_vlan = <2>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo4_reg>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <4>;
-	cd-gpios = <&gpio3 8 0>;
-	wp-gpios = <&gpio3 18 0>;
-};
-
-#include "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* +1.5V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1450000>;
-			regulator-max-microvolt = <1550000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <915000>;
-			regulator-max-microvolt = <1140000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <915000>;
-			regulator-max-microvolt = <1140000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* +1.8V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1750000>;
-			regulator-max-microvolt = <1870000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* +3.3V voltage with ±4% tolerance */
-			regulator-min-microvolt = <3175000>;
-			regulator-max-microvolt = <3430000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			/* +1.8V voltage with ±4% tolerance */
-			regulator-min-microvolt = <1750000>;
-			regulator-max-microvolt = <1870000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* +3.3V voltage with ±4% tolerance */
-			regulator-min-microvolt = <3175000>;
-			regulator-max-microvolt = <3430000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/am335x-pepper.dts b/src/arm/am335x-pepper.dts
deleted file mode 100644
index 0d35ab64641c..000000000000
--- a/src/arm/am335x-pepper.dts
+++ /dev/null
@@ -1,653 +0,0 @@
-/*
- * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "am33xx.dtsi"
-
-/ {
-	model = "Gumstix Pepper";
-	compatible = "gumstix,am335x-pepper", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc3_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	buttons: user_buttons {
-		compatible = "gpio-keys";
-	};
-
-	leds: user_leds {
-		compatible = "gpio-leds";
-	};
-
-	panel: lcd_panel {
-		compatible = "ti,tilcdc,panel";
-	};
-
-	sound: sound_iface {
-		compatible = "ti,da830-evm-audio";
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-	};
-
-	v3v3c_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-	};
-
-	vdd5_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-	};
-};
-
-/* I2C Busses */
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "at,24c256";
-		reg = <0x50>;
-	};
-
-	audio_codec: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-	};
-
-	accel: lis331dlh@1d {
-		compatible = "st,lis3lv02d";
-		reg = <0x1d>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-};
-
-&am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0 {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-	i2c1_pins: pinmux_i2c1 {
-		pinctrl-single,pins = <
-			0x10C (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
-		>;
-	};
-};
-
-/* Accelerometer */
-&accel {
-	pinctrl-names = "default";
-	pinctrl-0 = <&accel_pins>;
-
-	Vdd-supply = <&ldo3_reg>;
-	Vdd_IO-supply = <&ldo3_reg>;
-	st,irq1-click;
-	st,wakeup-x-lo;
-	st,wakeup-x-hi;
-	st,wakeup-y-lo;
-	st,wakeup-y-hi;
-	st,wakeup-z-lo;
-	st,wakeup-z-hi;
-	st,min-limit-x = <92>;
-	st,max-limit-x = <14>;
-	st,min-limit-y = <14>;
-	st,max-limit-y = <92>;
-	st,min-limit-z = <92>;
-	st,max-limit-z = <14>;
-};
-
-&am33xx_pinmux {
-	accel_pins: pinmux_accel {
-		pinctrl-single,pins = <
-			0x98 (PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
-		>;
-	};
-};
-
-/* Audio */
-&audio_codec {
-	status = "okay";
-
-	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	AVDD-supply = <&ldo3_reg>;
-	IOVDD-supply = <&ldo3_reg>;
-	DRVDD-supply = <&ldo3_reg>;
-	DVDD-supply = <&dcdc1_reg>;
-};
-
-&sound {
-	ti,model = "AM335x-EVM";
-	ti,audio-codec = <&audio_codec>;
-	ti,mcasp-controller = <&mcasp0>;
-	ti,codec-clock-rate = <12000000>;
-	ti,audio-routing =
-		"Headphone Jack",	"HPLOUT",
-		"Headphone Jack",	"HPROUT",
-		"LINE1L",		"Line In";
-};
-
-&mcasp0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&audio_pins>;
-
-	op-mode = <0>;	/* MCASP_ISS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <
-		1 2 0 0
-		0 0 0 0
-		0 0 0 0
-		0 0 0 0
-	>;
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
-
-&am33xx_pinmux {
-	audio_pins: pinmux_audio {
-		pinctrl-single,pins = <
-			0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
-			0x40 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-		>;
-	};
-};
-
-/* Display: 24-bit LCD Screen */
-&panel {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-	panel-info {
-		ac-bias = <255>;
-		ac-bias-intrpt = <0>;
-		dma-burst-sz = <16>;
-		bpp = <32>;
-		fdd = <0x80>;
-		sync-edge = <0>;
-		sync-ctrl = <1>;
-		raster-order = <0>;
-		fifo-th = <0>;
-	};
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 480x272 {
-			clock-frequency = <18400000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <4>;
-			hsync-len = <41>;
-			vfront-porch = <4>;
-			vback-porch = <2>;
-			vsync-len = <10>;
-			hsync-active = <1>;
-			vsync-active = <1>;
-		};
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	lcd_pins: pinmux_lcd {
-		pinctrl-single,pins = <
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
-			/* Display Enable */
-			0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-};
-
-/* Ethernet */
-&cpsw_emac0 {
-	status = "okay";
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
-};
-
-&cpsw_emac1 {
-	status = "okay";
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
-};
-
-&davinci_mdio {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-};
-
-&mac {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet_pins>;
-};
-
-
-&am33xx_pinmux {
-	ethernet_pins: pinmux_ethernet {
-		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
-			/* ethernet interrupt */
-			0x144 (PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
-			/* ethernet PHY nReset */
-			0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
-		>;
-	};
-
-	mdio_pins: pinmux_mdio {
-		pinctrl-single,pins = <
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-};
-
-/* MMC */
-&mmc1 {
-	/* Bootable SD card slot */
-	status = "okay";
-	vmmc-supply = <&ldo3_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc2 {
-	/* eMMC (not populated) on MMC #2 */
-	status = "disabled";
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	vmmc-supply = <&ldo3_reg>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&edma {
-	/* Map eDMA MMC2 Events from Crossbar */
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-                                            2 13>;
-};
-
-
-&mmc3 {
-	/* Wifi & Bluetooth on MMC #3 */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&wireless_pins>;
-	vmmmc-supply = <&v3v3c_reg>;
-	bus-width = <4>;
-	ti,non-removable;
-	dmas = <&edma 12
-		&edma 13>;
-	dma-names = "tx", "rx";
-};
-
-
-&am33xx_pinmux {
-	sd_pins: pinmux_sd_card {
-		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
-		>;
-	};
-	emmc_pins: pinmux_emmc {
-		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
-			/* EMMC nReset */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-		>;
-	};
-	wireless_pins: pinmux_wireless {
-		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
-			/* WLAN nReset */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-			/* WLAN nPower down */
-			0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			/* 32kHz Clock */
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-};
-
-/* Power */
-&vbat {
-	regulator-name = "vbat";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-};
-
-&v3v3c_reg {
-	regulator-name = "v3v3c_reg";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	vin-supply = <&vbat>;
-};
-
-&vdd5_reg {
-	regulator-name = "vdd5_reg";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-	vin-supply = <&vbat>;
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	backlight {
-		isel = <1>; /* ISET1 */
-		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
-		default-brightness = <80>;
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			/* VDD_1V8 system supply */
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			/* VRTC 1.8V always-on supply */
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			/* 3.3V rail */
-		};
-
-		ldo3_reg: regulator@5 {
-			/* VDD_3V3A 3.3V rail */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		ldo4_reg: regulator@6 {
-			/* VDD_3V3B 3.3V rail */
-		};
-	};
-};
-
-/* SPI Busses */
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-};
-
-&am33xx_pinmux {
-	spi0_pins: pinmux_spi0 {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
-			0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
-			0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
-		>;
-	};
-};
-
-/* Touch Screen */
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-/* UARTs */
-&uart0 {
-	/* Serial Console */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&uart1 {
-	/* Broken out to J6 header */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-	uart1_pins: pinmux_uart1 {
-		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-		>;
-	};
-};
-
-/* USB */
-&usb {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb_pins>;
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-        dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-        dr_mode = "host";
-};
-
-&cppi41dma {
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	usb_pins: pinmux_usb {
-		pinctrl-single,pins = <
-			/* USB0 Over-Current (active low) */
-			0x64 (PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			/* USB1 Over-Current (active low) */
-			0x68 (PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-		>;
-	};
-};
-
-/* User IO */
-&leds {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_leds_pins>;
-
-	led@0 {
-		label = "pepper:user0:blue";
-		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "none";
-		default-state = "off";
-	};
-
-	led@1 {
-		label = "pepper:user1:red";
-		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-		linux,default-trigger = "none";
-		default-state = "off";
-	};
-};
-
-&buttons {
-	pinctrl-names = "default";
-	pinctrl-0 = <&user_buttons_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	button@0 {
-		label = "home";
-		linux,code = <KEY_HOME>;
-		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
-	};
-
-	button@1 {
-		label = "menu";
-		linux,code = <KEY_MENU>;
-		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
-	};
-
-	buttons@2 {
-		label = "power";
-		linux,code = <KEY_POWER>;
-		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_pins: pinmux_user_leds {
-		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-			0x54 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-		>;
-	};
-
-	user_buttons_pins: pinmux_user_buttons {
-		pinctrl-single,pins = <
-			0x58 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5C (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
-			0x164 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
-		>;
-	};
-};
diff --git a/src/arm/am33xx-clocks.dtsi b/src/arm/am33xx-clocks.dtsi
deleted file mode 100644
index 712edce7d6fb..000000000000
--- a/src/arm/am33xx-clocks.dtsi
+++ /dev/null
@@ -1,646 +0,0 @@
-/*
- * Device Tree Source for AM33xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: rng_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0490>, <0x045c>, <0x0468>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0480>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0484>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x04d8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0488>, <0x0420>, <0x042c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0494>, <0x0434>, <0x0440>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_disp_ck: dpll_disp_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0498>, <0x0448>, <0x0454>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a4>;
-		ti,index-starts-at-one;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x048c>, <0x0470>, <0x049c>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x04ac>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	cefuse_fck: cefuse_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0a20>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clkdiv32k_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x014c>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
-		reg = <0x0530>;
-	};
-
-	mmu_fck: mmu_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0914>;
-	};
-
-	timer1_fck: timer1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
-		reg = <0x0528>;
-	};
-
-	timer2_fck: timer2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0508>;
-	};
-
-	timer3_fck: timer3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x050c>;
-	};
-
-	timer4_fck: timer4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0510>;
-	};
-
-	timer5_fck: timer5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0518>;
-	};
-
-	timer6_fck: timer6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x051c>;
-	};
-
-	timer7_fck: timer7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x0504>;
-	};
-
-	usbotg_fck: usbotg_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x047c>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	ieee5000_fck: ieee5000_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x00e4>;
-	};
-
-	wdt1_fck: wdt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x0538>;
-	};
-
-	l4_rtc_gclk: l4_rtc_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4fw_gclk: l4fw_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sysclk_div_ck: sysclk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
-		reg = <0x0520>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
-		reg = <0x053c>;
-	};
-
-	gpio0_dbclk: gpio0_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&gpio0_dbclk_mux_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0408>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00ac>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00b0>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00b4>;
-	};
-
-	lcd_gclk: lcd_gclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x0534>;
-		ti,set-rate-parent;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x052c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x052c>;
-		ti,max-div = <2>;
-	};
-
-	sysclkout_pre_ck: sysclkout_pre_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
-		reg = <0x0700>;
-	};
-
-	clkout2_div_ck: clkout2_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sysclkout_pre_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <8>;
-		reg = <0x0700>;
-	};
-
-	dbg_sysclk_ck: dbg_sysclk_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0414>;
-	};
-
-	dbg_clka_ck: dbg_clka_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <30>;
-		reg = <0x0414>;
-	};
-
-	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0414>;
-	};
-
-	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0414>;
-	};
-
-	stm_clk_div_ck: stm_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&stm_pmd_clock_mux_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <64>;
-		reg = <0x0414>;
-		ti,index-power-of-two;
-	};
-
-	trace_clk_div_ck: trace_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&trace_pmd_clk_mux_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <64>;
-		reg = <0x0414>;
-		ti,index-power-of-two;
-	};
-
-	clkout2_ck: clkout2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout2_div_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0700>;
-	};
-};
-
-&prcm_clockdomains {
-	clk_24mhz_clkdm: clk_24mhz_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&clkdiv32k_ick>;
-	};
-};
diff --git a/src/arm/am33xx.dtsi b/src/arm/am33xx.dtsi
deleted file mode 100644
index 3a0a161342ba..000000000000
--- a/src/arm/am33xx.dtsi
+++ /dev/null
@@ -1,845 +0,0 @@
-/*
- * Device Tree Source for AM33XX SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/am33xx.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,am33xx";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		d_can0 = &dcan0;
-		d_can1 = &dcan1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		phy0 = &usb0_phy;
-		phy1 = &usb1_phy;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-
-			/*
-			 * To consider voltage drop between PMIC and SoC,
-			 * tolerance value is reduced to 2% from 4% and
-			 * voltage value is increased as a precaution.
-			 */
-			operating-points = <
-				/* kHz    uV */
-				720000  1285000
-				600000  1225000
-				500000  1125000
-				275000  1125000
-			>;
-			voltage-tolerance = <2>; /* 2 percentage */
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	am33xx_pinmux: pinmux@44e10800 {
-		compatible = "pinctrl-single";
-		reg = <0x44e10800 0x0238>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x7f>;
-	};
-
-	/*
-	 * XXX: Use a flat representation of the AM33XX interconnect.
-	 * The real AM33XX interconnect network is quite complex. Since
-	 * it will not bring real advantage to represent that in DT
-	 * for the moment, just use a fake OCP bus entry to represent
-	 * the whole bus hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		prcm: prcm@44e00000 {
-			compatible = "ti,am3-prcm";
-			reg = <0x44e00000 0x4000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@44e10000 {
-			compatible = "ti,am3-scrm";
-			reg = <0x44e10000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,omap2-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <128>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x40>;
-			interrupts = <12 13 14>;
-			#dma-cells = <1>;
-		};
-
-		gpio0: gpio@44e07000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio1";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x44e07000 0x1000>;
-			interrupts = <96>;
-		};
-
-		gpio1: gpio@4804c000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x4804c000 0x1000>;
-			interrupts = <98>;
-		};
-
-		gpio2: gpio@481ac000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x481ac000 0x1000>;
-			interrupts = <32>;
-		};
-
-		gpio3: gpio@481ae000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x481ae000 0x1000>;
-			interrupts = <62>;
-		};
-
-		uart0: serial@44e09000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-			reg = <0x44e09000 0x2000>;
-			interrupts = <72>;
-			status = "disabled";
-		};
-
-		uart1: serial@48022000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-			reg = <0x48022000 0x2000>;
-			interrupts = <73>;
-			status = "disabled";
-		};
-
-		uart2: serial@48024000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-			reg = <0x48024000 0x2000>;
-			interrupts = <74>;
-			status = "disabled";
-		};
-
-		uart3: serial@481a6000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-			reg = <0x481a6000 0x2000>;
-			interrupts = <44>;
-			status = "disabled";
-		};
-
-		uart4: serial@481a8000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-			reg = <0x481a8000 0x2000>;
-			interrupts = <45>;
-			status = "disabled";
-		};
-
-		uart5: serial@481aa000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-			reg = <0x481aa000 0x2000>;
-			interrupts = <46>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@44e0b000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-			reg = <0x44e0b000 0x1000>;
-			interrupts = <70>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4802a000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-			reg = <0x4802a000 0x1000>;
-			interrupts = <71>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@4819c000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-			reg = <0x4819c000 0x1000>;
-			interrupts = <30>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			ti,needs-special-hs-handling;
-			dmas = <&edma 24
-				&edma 25>;
-			dma-names = "tx", "rx";
-			interrupts = <64>;
-			interrupt-parent = <&intc>;
-			reg = <0x48060000 0x1000>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@481d8000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
-			dma-names = "tx", "rx";
-			interrupts = <28>;
-			interrupt-parent = <&intc>;
-			reg = <0x481d8000 0x1000>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <29>;
-			interrupt-parent = <&intc>;
-			reg = <0x47810000 0x1000>;
-			status = "disabled";
-		};
-
-		hwspinlock: spinlock@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		wdt2: wdt@44e35000 {
-			compatible = "ti,omap3-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x44e35000 0x1000>;
-			interrupts = <91>;
-		};
-
-		dcan0: d_can@481cc000 {
-			compatible = "bosch,d_can";
-			ti,hwmods = "d_can0";
-			reg = <0x481cc000 0x2000
-				0x44e10644 0x4>;
-			interrupts = <52>;
-			status = "disabled";
-		};
-
-		dcan1: d_can@481d0000 {
-			compatible = "bosch,d_can";
-			ti,hwmods = "d_can1";
-			reg = <0x481d0000 0x2000
-				0x44e10644 0x4>;
-			interrupts = <55>;
-			status = "disabled";
-		};
-
-		mailbox: mailbox@480C8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480C8000 0x200>;
-			interrupts = <77>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <8>;
-		};
-
-		timer1: timer@44e31000 {
-			compatible = "ti,am335x-timer-1ms";
-			reg = <0x44e31000 0x400>;
-			interrupts = <67>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48040000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48040000 0x400>;
-			interrupts = <68>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48042000 0x400>;
-			interrupts = <69>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48044000 0x400>;
-			interrupts = <92>;
-			ti,hwmods = "timer4";
-			ti,timer-pwm;
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48046000 0x400>;
-			interrupts = <93>;
-			ti,hwmods = "timer5";
-			ti,timer-pwm;
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48048000 0x400>;
-			interrupts = <94>;
-			ti,hwmods = "timer6";
-			ti,timer-pwm;
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x4804a000 0x400>;
-			interrupts = <95>;
-			ti,hwmods = "timer7";
-			ti,timer-pwm;
-		};
-
-		rtc: rtc@44e3e000 {
-			compatible = "ti,da830-rtc";
-			reg = <0x44e3e000 0x1000>;
-			interrupts = <75
-				      76>;
-			ti,hwmods = "rtc";
-		};
-
-		spi0: spi@48030000 {
-			compatible = "ti,omap4-mcspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x48030000 0x400>;
-			interrupts = <65>;
-			ti,spi-num-cs = <2>;
-			ti,hwmods = "spi0";
-			dmas = <&edma 16
-				&edma 17
-				&edma 18
-				&edma 19>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		spi1: spi@481a0000 {
-			compatible = "ti,omap4-mcspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x481a0000 0x400>;
-			interrupts = <125>;
-			ti,spi-num-cs = <2>;
-			ti,hwmods = "spi1";
-			dmas = <&edma 42
-				&edma 43
-				&edma 44
-				&edma 45>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		usb: usb@47400000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47400000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-			status = "disabled";
-
-			usb_ctrl_mod: control@44e10620 {
-				compatible = "ti,am335x-usb-ctrl-module";
-				reg = <0x44e10620 0x10
-					0x44e10648 0x4>;
-				reg-names = "phy_ctrl", "wakeup";
-				status = "disabled";
-			};
-
-			usb0_phy: usb-phy@47401300 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401300 0x100>;
-				reg-names = "phy";
-				status = "disabled";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-			};
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401400 0x400
-					0x47401000 0x200>;
-				reg-names = "mc", "control";
-
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb0_phy>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1_phy: usb-phy@47401b00 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401b00 0x100>;
-				reg-names = "phy";
-				status = "disabled";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401c00 0x400
-					0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb1_phy>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				#dma-channels = <30>;
-				#dma-requests = <256>;
-				status = "disabled";
-			};
-		};
-
-		epwmss0: epwmss@48300000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48300000 0x10>;
-			ti,hwmods = "epwmss0";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48300100 0x48300100 0x80   /* ECAP */
-				  0x48300180 0x48300180 0x80   /* EQEP */
-				  0x48300200 0x48300200 0x80>; /* EHRPWM */
-
-			ecap0: ecap@48300100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48300100 0x80>;
-				interrupts = <31>;
-				interrupt-names = "ecap0";
-				ti,hwmods = "ecap0";
-				status = "disabled";
-			};
-
-			ehrpwm0: ehrpwm@48300200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
-				status = "disabled";
-			};
-		};
-
-		epwmss1: epwmss@48302000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48302000 0x10>;
-			ti,hwmods = "epwmss1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48302100 0x48302100 0x80   /* ECAP */
-				  0x48302180 0x48302180 0x80   /* EQEP */
-				  0x48302200 0x48302200 0x80>; /* EHRPWM */
-
-			ecap1: ecap@48302100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48302100 0x80>;
-				interrupts = <47>;
-				interrupt-names = "ecap1";
-				ti,hwmods = "ecap1";
-				status = "disabled";
-			};
-
-			ehrpwm1: ehrpwm@48302200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
-				status = "disabled";
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48304000 0x10>;
-			ti,hwmods = "epwmss2";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48304100 0x48304100 0x80   /* ECAP */
-				  0x48304180 0x48304180 0x80   /* EQEP */
-				  0x48304200 0x48304200 0x80>; /* EHRPWM */
-
-			ecap2: ecap@48304100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48304100 0x80>;
-				interrupts = <61>;
-				interrupt-names = "ecap2";
-				ti,hwmods = "ecap2";
-				status = "disabled";
-			};
-
-			ehrpwm2: ehrpwm@48304200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
-				status = "disabled";
-			};
-		};
-
-		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			no_bd_ram = <0>;
-			rx_descs = <64>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&intc>;
-			/*
-			 * c0_rx_thresh_pend
-			 * c0_rx_pend
-			 * c0_tx_pend
-			 * c0_misc_pend
-			 */
-			interrupts = <40 41 42 43>;
-			ranges;
-			status = "disabled";
-
-			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,davinci_mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x4a101000 0x100>;
-				status = "disabled";
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am3352-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
-			};
-		};
-
-		ocmcram: ocmcram@40300000 {
-			compatible = "ti,am3352-ocmcram";
-			reg = <0x40300000 0x10000>;
-			ti,hwmods = "ocmcram";
-		};
-
-		wkup_m3: wkup_m3@44d00000 {
-			compatible = "ti,am3353-wkup-m3";
-			reg = <0x44d00000 0x4000	/* M3 UMEM */
-			       0x44d80000 0x2000>;	/* M3 DMEM */
-			ti,hwmods = "wkup_m3";
-			ti,no-reset-on-init;
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <4>;
-			ti,hwmods = "elm";
-			status = "disabled";
-		};
-
-		lcdc: lcdc@4830e000 {
-			compatible = "ti,am33xx-tilcdc";
-			reg = <0x4830e000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <36>;
-			ti,hwmods = "lcdc";
-			status = "disabled";
-		};
-
-		tscadc: tscadc@44e0d000 {
-			compatible = "ti,am3359-tscadc";
-			reg = <0x44e0d000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <16>;
-			ti,hwmods = "adc_tsc";
-			status = "disabled";
-
-			tsc {
-				compatible = "ti,am3359-tsc";
-			};
-			am335x_adc: adc {
-				#io-channel-cells = <1>;
-				compatible = "ti,am3359-adc";
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			reg = <0x50000000 0x2000>;
-			interrupts = <100>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x200>;
-			interrupts = <109>;
-			dmas = <&edma 36>;
-			dma-names = "rx";
-		};
-
-		aes: aes@53500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53500000 0xa0>;
-			interrupts = <103>;
-			dmas = <&edma 6>,
-			       <&edma 5>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp0: mcasp@48038000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>,
-			      <0x46000000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 8>,
-				<&edma 9>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp1: mcasp@4803C000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>,
-			      <0x46400000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 10>,
-				<&edma 11>;
-			dma-names = "tx", "rx";
-		};
-
-		rng: rng@48310000 {
-			compatible = "ti,omap4-rng";
-			ti,hwmods = "rng";
-			reg = <0x48310000 0x2000>;
-			interrupts = <111>;
-		};
-	};
-};
-
-/include/ "am33xx-clocks.dtsi"
diff --git a/src/arm/am3517-craneboard.dts b/src/arm/am3517-craneboard.dts
deleted file mode 100644
index 2d40b3f241cd..000000000000
--- a/src/arm/am3517-craneboard.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * See craneboard.org for more details
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-
-/ {
-	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
-	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-};
-
-&davinci_emac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&mmc1 {
-	vmmc-supply = <&vdd2_reg>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&mmc3 {
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-#include "tps65910.dtsi"
-
-&omap3_pmx_core {
-	tps_pins: pinmux_tps_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
-		>;
-	};
-};
-
-&tps {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tps_pins>;
-
-	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	interrupt-parent = <&intc>;
-
-	ti,en-ck32k-xtal;
-
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		/*
-		 * Unused:
-		 * VDIG1=2.7V,300mA max
-		 * VDIG2=1.8V,300mA max
-		 */
-
-		vpll_reg: regulator@7 {
-			/* VDDS_DPLL_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			/* VDDS_SRAM_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			/* VDDA1P8V_USBPHY */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		/* VAUX33 unused */
-
-		vdac_reg: regulator@8 {
-			/* VDDA_DAC_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			/* VDDA3P3V_USBPHY */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_CORE */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDDSHV_3V3 */
-			regulator-name = "vdd_shv";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		/* VDD3 unused */
-	};
-};
diff --git a/src/arm/am3517-evm.dts b/src/arm/am3517-evm.dts
deleted file mode 100644
index b4127c6493a2..000000000000
--- a/src/arm/am3517-evm.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-
-/ {
-	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
-	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-        vmmc_fixed: vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc_fixed";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
-};
-
-&davinci_emac {
-	     status = "okay";
-};
-
-&davinci_mdio {
-	     status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc_fixed>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-      status = "disabled";
-};
-
-&mmc3 {
-      status = "disabled";
-};
-
diff --git a/src/arm/am3517.dtsi b/src/arm/am3517.dtsi
deleted file mode 100644
index 5a452fdd7c5d..000000000000
--- a/src/arm/am3517.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Device Tree Source for am3517 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap3.dtsi"
-
-/ {
-	aliases {
-		serial3 = &uart4;
-	};
-
-	ocp {
-		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
-			ti,hwmods = "am35x_otg_hs";
-			status = "disabled";
-			reg = <0x5c040000 0x1000>;
-			interrupts = <71>;
-			interrupt-names = "mc";
-		};
-
-		davinci_emac: ethernet@0x5c000000 {
-			compatible = "ti,am3517-emac";
-			ti,hwmods = "davinci_emac";
-			status = "disabled";
-			reg = <0x5c000000 0x30000>;
-			interrupts = <67 68 69 70>;
-			ti,davinci-ctrl-reg-offset = <0x10000>;
-			ti,davinci-ctrl-mod-reg-offset = <0>;
-			ti,davinci-ctrl-ram-offset = <0x20000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			ti,davinci-rmii-en = /bits/ 8 <1>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-		};
-
-		davinci_mdio: ethernet@0x5c030000 {
-			compatible = "ti,davinci_mdio";
-			ti,hwmods = "davinci_mdio";
-			status = "disabled";
-			reg = <0x5c030000 0x1000>;
-			bus_freq = <1000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		uart4: serial@4809e000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			status = "disabled";
-			reg = <0x4809e000 0x400>;
-			interrupts = <84>;
-			dmas = <&sdma 55 &sdma 54>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-	};
-};
-
-&iva {
-	status = "disabled";
-};
-
-&mailbox {
-	status = "disabled";
-};
-
-&mmu_isp {
-	status = "disabled";
-};
-
-&smartreflex_mpu_iva {
-	status = "disabled";
-};
-
-/include/ "am35xx-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/src/arm/am3517_mt_ventoux.dts b/src/arm/am3517_mt_ventoux.dts
deleted file mode 100644
index fdf5ce63c8e6..000000000000
--- a/src/arm/am3517_mt_ventoux.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TeeJet Mt.Ventoux";
-	compatible = "teejet,mt_ventoux", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	/* AM35xx doesn't have IVA */
-	soc {
-		iva {
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/am35xx-clocks.dtsi b/src/arm/am35xx-clocks.dtsi
deleted file mode 100644
index df489d310b50..000000000000
--- a/src/arm/am35xx-clocks.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	emac_ick: emac_ick {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x059c>;
-		ti,bit-shift = <1>;
-	};
-
-	emac_fck: emac_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&rmii_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <9>;
-	};
-
-	vpfe_ick: vpfe_ick {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x059c>;
-		ti,bit-shift = <2>;
-	};
-
-	vpfe_fck: vpfe_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pclk_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <10>;
-	};
-
-	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x059c>;
-		ti,bit-shift = <0>;
-	};
-
-	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <8>;
-	};
-
-	hecc_ck: hecc_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x059c>;
-		ti,bit-shift = <3>;
-	};
-};
-&cm_clocks {
-	ipss_ick: ipss_ick {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	rmii_ck: rmii_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-	};
-
-	pclk_ck: pclk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	uart4_ick_am35xx: uart4_ick_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
-
-	uart4_fck_am35xx: uart4_fck_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
-			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
-			 <&hecc_ck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
-	};
-};
diff --git a/src/arm/am4372.dtsi b/src/arm/am4372.dtsi
deleted file mode 100644
index 9b3d2ba82f13..000000000000
--- a/src/arm/am4372.dtsi
+++ /dev/null
@@ -1,891 +0,0 @@
-/*
- * Device Tree Source for AM4372 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,am4372", "ti,am43";
-	interrupt-parent = <&gic>;
-
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	gic: interrupt-controller@48241000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48241000 0x1000>,
-		      <0x48240100 0x0100>;
-	};
-
-	l2-cache-controller@48242000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x48242000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	am43xx_pinmux: pinmux@44e10800 {
-		compatible = "pinctrl-single";
-		reg = <0x44e10800 0x31c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0xffffffff>;
-	};
-
-	ocp {
-		compatible = "ti,am4372-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-		reg = <0x44000000 0x400000
-		       0x44800000 0x400000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		prcm: prcm@44df0000 {
-			compatible = "ti,am4-prcm";
-			reg = <0x44df0000 0x11000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@44e10000 {
-			compatible = "ti,am4-scrm";
-			reg = <0x44e10000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-		};
-
-		uart0: serial@44e09000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x44e09000 0x2000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-		};
-
-		uart1: serial@48022000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x48022000 0x2000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			status = "disabled";
-		};
-
-		uart2: serial@48024000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x48024000 0x2000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			status = "disabled";
-		};
-
-		uart3: serial@481a6000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481a6000 0x2000>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			status = "disabled";
-		};
-
-		uart4: serial@481a8000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481a8000 0x2000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			status = "disabled";
-		};
-
-		uart5: serial@481aa000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481aa000 0x2000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			status = "disabled";
-		};
-
-		mailbox: mailbox@480C8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480C8000 0x200>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <8>;
-		};
-
-		timer1: timer@44e31000 {
-			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
-			reg = <0x44e31000 0x400>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-alwon;
-			ti,hwmods = "timer1";
-		};
-
-		timer2: timer@48040000  {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48040000  0x400>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48042000 0x400>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-			status = "disabled";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48044000 0x400>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer4";
-			status = "disabled";
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48046000 0x400>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer5";
-			status = "disabled";
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48048000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer6";
-			status = "disabled";
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4804a000 0x400>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer7";
-			status = "disabled";
-		};
-
-		timer8: timer@481c1000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x481c1000 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			status = "disabled";
-		};
-
-		timer9: timer@4833d000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4833d000 0x400>;
-			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-			status = "disabled";
-		};
-
-		timer10: timer@4833f000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4833f000 0x400>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-			status = "disabled";
-		};
-
-		timer11: timer@48341000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48341000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			status = "disabled";
-		};
-
-		counter32k: counter@44e86000 {
-			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
-			reg = <0x44e86000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
-
-		rtc: rtc@44e3e000 {
-			compatible = "ti,am4372-rtc","ti,da830-rtc";
-			reg = <0x44e3e000 0x1000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "rtc";
-			status = "disabled";
-		};
-
-		wdt: wdt@44e35000 {
-			compatible = "ti,am4372-wdt","ti,omap3-wdt";
-			reg = <0x44e35000 0x1000>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		gpio0: gpio@44e07000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x44e07000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio1";
-			status = "disabled";
-		};
-
-		gpio1: gpio@4804c000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x4804c000 0x1000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio2";
-			status = "disabled";
-		};
-
-		gpio2: gpio@481ac000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x481ac000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio3";
-			status = "disabled";
-		};
-
-		gpio3: gpio@481ae000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x481ae000 0x1000>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio4";
-			status = "disabled";
-		};
-
-		gpio4: gpio@48320000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x48320000 0x1000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio5";
-			status = "disabled";
-		};
-
-		gpio5: gpio@48322000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x48322000 0x1000>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio6";
-			status = "disabled";
-		};
-
-		hwspinlock: spinlock@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		i2c0: i2c@44e0b000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x44e0b000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4802a000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x4802a000 0x1000>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@4819c000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x4819c000 0x1000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c3";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi0: spi@48030000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x48030000 0x400>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi0";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x48060000 0x1000>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&edma 24
-				&edma 25>;
-			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@481d8000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x481d8000 0x1000>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
-			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x47810000 0x1000>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		spi1: spi@481a0000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a0000 0x400>;
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@481a2000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a2000 0x400>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi3: spi@481a4000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a4000 0x400>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi3";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi4: spi@48345000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x48345000 0x400>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi4";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mac: ethernet@4a100000 {
-			compatible = "ti,am4372-cpsw","ti,cpsw";
-			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			status = "disabled";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			no_bd_ram = <0>;
-			rx_descs = <64>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			ranges;
-
-			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,am4372-mdio","ti,davinci_mdio";
-				reg = <0x4a101000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				status = "disabled";
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am43xx-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
-			};
-		};
-
-		epwmss0: epwmss@48300000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48300000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss0";
-			status = "disabled";
-
-			ecap0: ecap@48300100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48300100 0x80>;
-				ti,hwmods = "ecap0";
-				status = "disabled";
-			};
-
-			ehrpwm0: ehrpwm@48300200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
-				status = "disabled";
-			};
-		};
-
-		epwmss1: epwmss@48302000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48302000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss1";
-			status = "disabled";
-
-			ecap1: ecap@48302100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48302100 0x80>;
-				ti,hwmods = "ecap1";
-				status = "disabled";
-			};
-
-			ehrpwm1: ehrpwm@48302200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
-				status = "disabled";
-			};
-		};
-
-		epwmss2: epwmss@48304000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48304000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss2";
-			status = "disabled";
-
-			ecap2: ecap@48304100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48304100 0x80>;
-				ti,hwmods = "ecap2";
-				status = "disabled";
-			};
-
-			ehrpwm2: ehrpwm@48304200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
-				status = "disabled";
-			};
-		};
-
-		epwmss3: epwmss@48306000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48306000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss3";
-			status = "disabled";
-
-			ehrpwm3: ehrpwm@48306200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48306200 0x80>;
-				ti,hwmods = "ehrpwm3";
-				status = "disabled";
-			};
-		};
-
-		epwmss4: epwmss@48308000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48308000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss4";
-			status = "disabled";
-
-			ehrpwm4: ehrpwm@48308200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48308200 0x80>;
-				ti,hwmods = "ehrpwm4";
-				status = "disabled";
-			};
-		};
-
-		epwmss5: epwmss@4830a000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x4830a000 0x10>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss5";
-			status = "disabled";
-
-			ehrpwm5: ehrpwm@4830a200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x4830a200 0x80>;
-				ti,hwmods = "ehrpwm5";
-				status = "disabled";
-			};
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x300>;
-			dmas = <&edma 36>;
-			dma-names = "rx";
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		aes: aes@53501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53501000 0xa0>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6
-				&edma 5>;
-			dma-names = "tx", "rx";
-		};
-
-		des: des@53701000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x53701000 0xa0>;
-			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34
-				&edma 33>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp0: mcasp@48038000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>,
-			      <0x46000000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 8>,
-			       <&edma 9>;
-			dma-names = "tx", "rx";
-		};
-
-		mcasp1: mcasp@4803C000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>,
-			      <0x46400000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 10>,
-			       <&edma 11>;
-			dma-names = "tx", "rx";
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "elm";
-			clocks = <&l4ls_gclk>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			clocks = <&l3s_gclk>;
-			clock-names = "fck";
-			reg = <0x50000000 0x2000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		am43xx_control_usb2phy1: control-phy@44e10620 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10620 0x4>;
-			reg-names = "power";
-		};
-
-		am43xx_control_usb2phy2: control-phy@0x44e10628 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10628 0x4>;
-			reg-names = "power";
-		};
-
-		ocp2scp0: ocp2scp@483a8000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp0";
-
-			usb2_phy1: phy@483a8000 {
-				compatible = "ti,am437x-usb2";
-				reg = <0x483a8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy1>;
-				clocks = <&usb_phy0_always_on_clk32k>,
-					 <&usb_otg_ss0_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		ocp2scp1: ocp2scp@483e8000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp1";
-
-			usb2_phy2: phy@483e8000 {
-				compatible = "ti,am437x-usb2";
-				reg = <0x483e8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy2>;
-				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		dwc3_1: omap_dwc3@48380000 {
-			compatible = "ti,am437x-dwc3";
-			ti,hwmods = "usb_otg_ss0";
-			reg = <0x48380000 0x10000>;
-			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <1>;
-			ranges;
-
-			usb1: usb@48390000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x48390000 0x17000>;
-				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy1>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				status = "disabled";
-			};
-		};
-
-		dwc3_2: omap_dwc3@483c0000 {
-			compatible = "ti,am437x-dwc3";
-			ti,hwmods = "usb_otg_ss1";
-			reg = <0x483c0000 0x10000>;
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <1>;
-			ranges;
-
-			usb2: usb@483d0000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x483d0000 0x17000>;
-				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy2>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				status = "disabled";
-			};
-		};
-
-		qspi: qspi@47900000 {
-			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			interrupts = <0 138 0x4>;
-			num-cs = <4>;
-			status = "disabled";
-		};
-
-		hdq: hdq@48347000 {
-			compatible = "ti,am43xx-hdq";
-			reg = <0x48347000 0x1000>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&func_12m_clk>;
-			clock-names = "fck";
-			ti,hwmods = "hdq1w";
-			status = "disabled";
-		};
-
-		dss: dss@4832a000 {
-			compatible = "ti,omap3-dss";
-			reg = <0x4832a000 0x200>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&disp_clk>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc: dispc@4832a400 {
-				compatible = "ti,omap3-dispc";
-				reg = <0x4832a400 0x400>;
-				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-			};
-
-			rfbi: rfbi@4832a800 {
-				compatible = "ti,omap3-rfbi";
-				reg = <0x4832a800 0x100>;
-				ti,hwmods = "dss_rfbi";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-			};
-		};
-	};
-};
-
-/include/ "am43xx-clocks.dtsi"
diff --git a/src/arm/am437x-gp-evm.dts b/src/arm/am437x-gp-evm.dts
deleted file mode 100644
index 646a6eade788..000000000000
--- a/src/arm/am437x-gp-evm.dts
+++ /dev/null
@@ -1,515 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* AM437x GP EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "TI AM437x GP EVM";
-	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	vmmcsd_fixed: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
-				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
-				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
-
-		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
-				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
-
-		linux,keymap = <0x00000201      /* P1 */
-				0x00010202      /* P2 */
-				0x01000067      /* UP */
-				0x0101006a      /* RIGHT */
-				0x02000069      /* LEFT */
-				0x0201006c>;      /* DOWN */
-		};
-
-	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-};
-
-&am43xx_pinmux {
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: i2c1_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-		>;
-	};
-
-	pixcir_ts_pins: pixcir_ts_pins {
-		pinctrl-single,pins = <
-			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	nand_flash_x8: nand_flash_x8 {
-		pinctrl-single,pins = <
-			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
-			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	dss_pins: dss_pins {
-		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-
-		>;
-	};
-
-	lcd_pins: lcd_pins {
-		pinctrl-single,pins = <
-			/* GPIO 5_8 to select LCD / HDMI */
-			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	tps65218: tps65218@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
-		interrupt-parent = <&gic>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
-			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-
-		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pixcir_ts_pins>;
-		reg = <0x5c>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-
-		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins>;
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&gpio4 {
-	status = "okay";
-};
-
-&gpio5 {
-	status = "okay";
-	ti,no-reset-on-init;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&mac {
-	slaves = <1>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
-	nand@0,0 {
-		reg = <0 0 4>;		/* device IO registers */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>;
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <25>;
-		gpmc,adv-wr-off-ns = <25>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <20>;
-		gpmc,oe-on-ns = <3>;
-		gpmc,oe-off-ns = <30>;
-		gpmc,access-ns = <30>;
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
-		gpmc,wait-on-read;
-		gpmc,wait-on-write;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00040000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00040000 0x00040000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x000c0000 0x00040000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00100000 0x00080000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x00180000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x00280000 0x00040000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x002c0000 0x00040000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00300000 0x00700000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x1f600000>;
-		};
-	};
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/src/arm/am437x-sk-evm.dts b/src/arm/am437x-sk-evm.dts
deleted file mode 100644
index 859ff3d620ee..000000000000
--- a/src/arm/am437x-sk-evm.dts
+++ /dev/null
@@ -1,613 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* AM437x SK EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "TI AM437x SK EVM";
-	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM437x-SK-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-		compatible = "gpio-matrix-keypad";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_pins>;
-
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <1500>;
-
-		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
-				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
-
-		col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH		/* Bank5, pin13 */
-				&gpio5 4 GPIO_ACTIVE_HIGH>;	/* Bank5, pin4 */
-
-		linux,keymap = <
-				MATRIX_KEY(0, 0, KEY_DOWN)
-				MATRIX_KEY(0, 1, KEY_RIGHT)
-				MATRIX_KEY(1, 0, KEY_LEFT)
-				MATRIX_KEY(1, 1, KEY_UP)
-			>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		led@0 {
-			label = "am437x-sk:red:heartbeat";
-			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@1 {
-			label = "am437x-sk:green:mmc1";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "am437x-sk:blue:cpu0";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "am437x-sk:blue:usr3";
-			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
-			default-state = "off";
-		};
-	};
-
-	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <43>;
-			hsync-len = <4>;
-			vback-porch = <12>;
-			vfront-porch = <4>;
-			vsync-len = <10>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-};
-
-&am43xx_pinmux {
-	matrix_keypad_pins: matrix_keypad_pins {
-		pinctrl-single,pins = <
-			0x24c (PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
-			0x250 (PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
-			0x254 (PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
-			0x258 (PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
-		>;
-	};
-
-	leds_pins: leds_pins {
-		pinctrl-single,pins = <
-			0x228 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
-			0x22c (PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
-			0x230 (PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
-			0x234 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
-		>;
-	};
-
-	i2c0_pins: i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: i2c1_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
-		>;
-	};
-
-	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
-		pinctrl-single,pins = <
-			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
-
-			/* Slave 2 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	dss_pins: dss_pins {
-		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* DSS AC BIAS EN */
-
-		>;
-	};
-
-	qspi_pins: qspi_pins {
-		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
-		>;
-	};
-
-	mcasp1_pins: mcasp1_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-
-	lcd_pins: lcd_pins {
-		pinctrl-single,pins = <
-			/* GPIO 5_8 to select LCD / HDMI */
-			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
-		>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	tps@24 {
-		compatible = "ti,tps65218";
-		reg = <0x24>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
-			/* VDD_CORE limits min of OPP50 and max of OPP100 */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
-			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
-			regulator-name = "vdds_ddr";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc4: regulator-dcdc4 {
-			compatible = "ti,tps65218-dcdc4";
-			regulator-name = "v3_3d";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
-			regulator-name = "v1_8d";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-	};
-
-	at24@50 {
-		compatible = "at24,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-
-	edt-ft5306@38 {
-		status = "okay";
-		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
-		pinctrl-names = "default";
-		pinctrl-0 = <&edt_ft5306_ts_pins>;
-
-		reg = <0x38>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <31 0>;
-
-		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <272>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&dcdc4>;
-		IOVDD-supply = <&dcdc4>;
-		DRVDD-supply = <&dcdc4>;
-		DVDD-supply = <&ldo1>;
-	};
-
-	lis331dlh@18 {
-		compatible = "st,lis331dlh";
-		reg = <0x18>;
-		status = "okay";
-
-		Vdd-supply = <&dcdc4>;
-		Vdd_IO-supply = <&dcdc4>;
-		interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ecap0_pins>;
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio5 {
-	status = "okay";
-};
-
-&mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-
-	vmmc-supply = <&dcdc4>;
-	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_pins>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "mx66l51235l";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first 512KiB
-		 * for a valid file to boot(XIP).
-		 */
-		partition@0 {
-			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
-		};
-		partition@1 {
-			label = "QSPI.U_BOOT.backup";
-			reg = <0x00080000 0x00080000>;
-		};
-		partition@2 {
-			label = "QSPI.U-BOOT-SPL_OS";
-			reg = <0x00100000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.U_BOOT_ENV";
-			reg = <0x00110000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.U-BOOT-ENV.backup";
-			reg = <0x00120000 0x00010000>;
-		};
-		partition@5 {
-			label = "QSPI.KERNEL";
-			reg = <0x00130000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.FILESYSTEM";
-			reg = <0x00930000 0x36D0000>;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <4>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <5>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&elm {
-	status = "okay";
-};
-
-&mcasp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp1_pins>;
-
-	status = "okay";
-
-	op-mode = <0>;
-	tdm-slots = <2>;
-	serial-dir = <
-		0 0 1 2
-	>;
-
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
-
-&dss {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
diff --git a/src/arm/am43x-epos-evm.dts b/src/arm/am43x-epos-evm.dts
deleted file mode 100644
index ed7dd2395915..000000000000
--- a/src/arm/am43x-epos-evm.dts
+++ /dev/null
@@ -1,629 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* AM43x EPOS EVM */
-
-/dts-v1/;
-
-#include "am4372.dtsi"
-#include <dt-bindings/pinctrl/am43xx.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "TI AM43x EPOS EVM";
-	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
-
-	aliases {
-		display0 = &lcd0;
-	};
-
-	vmmcsd_fixed: fixedregulator-sd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-	};
-
-	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	am43xx_pinmux: pinmux@44e10800 {
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		nand_flash_x8: nand_flash_x8 {
-			pinctrl-single,pins = <
-				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
-				0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-			>;
-		};
-
-		ecap0_pins: backlight_pins {
-			pinctrl-single,pins = <
-				0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-			>;
-		};
-
-		i2c2_pins: pinmux_i2c2_pins {
-			pinctrl-single,pins = <
-				0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
-				0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
-			>;
-		};
-
-		spi0_pins: pinmux_spi0_pins {
-			pinctrl-single,pins = <
-				0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
-				0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
-				0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
-				0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
-			>;
-		};
-
-		spi1_pins: pinmux_spi1_pins {
-			pinctrl-single,pins = <
-				0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
-				0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
-				0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
-				0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
-			>;
-		};
-
-		mmc1_pins: pinmux_mmc1_pins {
-			pinctrl-single,pins = <
-				0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-			>;
-		};
-
-		qspi1_default: qspi1_default {
-			pinctrl-single,pins = <
-				0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
-				0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
-			>;
-		};
-
-		pixcir_ts_pins: pixcir_ts_pins {
-			pinctrl-single,pins = <
-				0x44 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
-			>;
-		};
-
-		hdq_pins: pinmux_hdq_pins {
-			pinctrl-single,pins = <
-				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
-			>;
-		};
-
-		dss_pins: dss_pins {
-			pinctrl-single,pins = <
-				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-			>;
-		};
-
-		lcd_pins: lcd_pins {
-			pinctrl-single,pins = <
-				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
-				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
-			>;
-		};
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-			compatible = "gpio-matrix-keypad";
-			debounce-delay-ms = <5>;
-			col-scan-delay-us = <2>;
-
-			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
-				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
-				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
-				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
-
-			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
-				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
-				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
-				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
-
-			linux,keymap = <0x00000201	/* P1 */
-				0x01000204	/* P4 */
-				0x02000207	/* P7 */
-				0x0300020a	/* NUMERIC_STAR */
-				0x00010202	/* P2 */
-				0x01010205	/* P5 */
-				0x02010208	/* P8 */
-				0x03010200	/* P0 */
-				0x00020203	/* P3 */
-				0x01020206	/* P6 */
-				0x02020209	/* P9 */
-				0x0302020b	/* NUMERIC_POUND */
-				0x00030067	/* UP */
-				0x0103006a	/* RIGHT */
-				0x0203006c	/* DOWN */
-				0x03030069>;	/* LEFT */
-		};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <16>;
-	phy-mode = "rmii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
-&phy_sel {
-	rmii-clock-ext;
-};
-
-&i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-
-	tps65218: tps65218@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
-		interrupt-parent = <&gic>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1144000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
-			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1350000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
-			regulator-name = "v1_0bat";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-
-		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
-			regulator-name = "v1_8bat";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-
-	at24@50 {
-		compatible = "at24,24c256";
-		pagesize = <64>;
-		reg = <0x50>;
-	};
-
-	pixcir_ts@5c {
-		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pixcir_ts_pins>;
-		reg = <0x5c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
-
-		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-
-		touchscreen-size-x = <1024>;
-		touchscreen-size-y = <600>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	status = "okay";
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;  /* cs-on-ns */
-		gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
-		gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
-		gpmc,we-on-ns = <0>;   /* cs-on-ns */
-		gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
-		gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
-		gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
-		gpmc,access-ns = <30>; /* tCEA + 4*/
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x00040000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00040000 0x00040000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x000C0000 0x00040000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00100000 0x00080000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x00180000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x00280000 0x00040000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x002C0000 0x00040000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00300000 0x00700000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x1f600000>;
-		};
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ecap0 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-	status = "okay";
-};
-
-&usb2_phy1 {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb2_phy2 {
-	status = "okay";
-};
-
-&usb2 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_default>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "mx66l51235l";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first 512KiB
-		 * for a valid file to boot(XIP).
-		 */
-		partition@0 {
-			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
-		};
-		partition@1 {
-			label = "QSPI.U_BOOT.backup";
-			reg = <0x00080000 0x00080000>;
-		};
-		partition@2 {
-			label = "QSPI.U-BOOT-SPL_OS";
-			reg = <0x00100000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.U_BOOT_ENV";
-			reg = <0x00110000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.U-BOOT-ENV.backup";
-			reg = <0x00120000 0x00010000>;
-		};
-		partition@5 {
-			label = "QSPI.KERNEL";
-			reg = <0x00130000 0x0800000>;
-		};
-		partition@6 {
-			label = "QSPI.FILESYSTEM";
-			reg = <0x00930000 0x36D0000>;
-		};
-	};
-};
-
-&hdq {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdq_pins>;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_pins>;
-
-	port {
-		dpi_out: endpoint@0 {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/src/arm/am43xx-clocks.dtsi b/src/arm/am43xx-clocks.dtsi
deleted file mode 100644
index c7dc9dab93a4..000000000000
--- a/src/arm/am43xx-clocks.dtsi
+++ /dev/null
@@ -1,757 +0,0 @@
-/*
- * Device Tree Source for AM43xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0040>;
-	};
-
-	crystal_freq_sel_ck: crystal_freq_sel_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0040>;
-	};
-
-	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm3_tbclk: ehrpwm3_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm4_tbclk: ehrpwm4_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm5_tbclk: ehrpwm5_tbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d38>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d3c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d40>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_disp_ck: dpll_disp_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e30>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2df0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clkdiv32k_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a38>;
-	};
-
-	sysclk_div: sysclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
-		reg = <0x4248>;
-	};
-
-	clk_32k_tpm_ck: clk_32k_tpm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	timer1_fck: timer1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4200>;
-	};
-
-	timer2_fck: timer2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4204>;
-	};
-
-	timer3_fck: timer3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4208>;
-	};
-
-	timer4_fck: timer4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x420c>;
-	};
-
-	timer5_fck: timer5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4210>;
-	};
-
-	timer6_fck: timer6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4214>;
-	};
-
-	timer7_fck: timer7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4218>;
-	};
-
-	wdt1_fck: wdt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x422c>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
-		reg = <0x4238>;
-	};
-
-	clk_32k_mosc_ck: clk_32k_mosc_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4240>;
-	};
-
-	gpio0_dbclk: gpio0_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&gpio0_dbclk_mux_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2b68>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c78>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c80>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c88>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c90>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c98>;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x423c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x423c>;
-		ti,max-div = <2>;
-	};
-
-	disp_clk: disp_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x4244>;
-		ti,set-rate-parent;
-	};
-
-	dpll_extdev_ck: dpll_extdev_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
-	};
-
-	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_extdev_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mux_synctimer32k_ck: mux_synctimer32k_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
-		reg = <0x4230>;
-	};
-
-	synctimer_32kclk: synctimer_32kclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&mux_synctimer32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a30>;
-	};
-
-	timer8_fck: timer8_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x421c>;
-	};
-
-	timer9_fck: timer9_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4220>;
-	};
-
-	timer10_fck: timer10_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4224>;
-	};
-
-	timer11_fck: timer11_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4228>;
-	};
-
-	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cpsw_50m_clkdiv>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_per_ck>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e14>;
-		ti,invert-autoidle-bit;
-	};
-
-	dll_aging_clk_div: dll_aging_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin_ck>;
-		reg = <0x4250>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	div_core_25m_ck: div_core_25m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	func_12m_clk: func_12m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	vtp_clk_div: vtp_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4260>;
-	};
-
-	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a40>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a48>;
-	};
-
-	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x8a60>;
-	};
-
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x8a68>;
-	};
-};
diff --git a/src/arm/armada-370-db.dts b/src/arm/armada-370-db.dts
deleted file mode 100644
index 416f4e5a69c1..000000000000
--- a/src/arm/armada-370-db.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 370 evaluation board
- * (DB-88F6710-BP-DDR3)
- *
- *  Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-370.dtsi"
-
-/ {
-	model = "Marvell Armada 370 Evaluation Board";
-	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				clock-frequency = <100000>;
-				status = "okay";
-				audio_codec: audio-codec@4a {
-					compatible = "cirrus,cs42l51";
-					reg = <0x4a>;
-				};
-			};
-
-			audio-controller@30000 {
-				pinctrl-0 = <&i2s_pins2>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins1>;
-				pinctrl-names = "default";
-				/*
-				 * This device is disabled by default, because
-				 * using the SD card connector requires
-				 * changing the default CON40 connector
-				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
-				 * different connector
-				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
-				 */
-				status = "disabled";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			pinctrl {
-				/*
-				 * These pins might be muxed as I2S by
-				 * the bootloader, but it conflicts
-				 * with the real I2S pins that are
-				 * muxed using i2s_pins. We must mux
-				 * those pins to a function other than
-				 * I2S.
-				 */
-				pinctrl-0 = <&hog_pins1 &hog_pins2>;
-				pinctrl-names = "default";
-
-				hog_pins1: hog-pins1 {
-					marvell,pins = "mpp6",  "mpp8", "mpp10",
-						       "mpp12", "mpp13";
-					marvell,function = "gpio";
-				};
-
-				hog_pins2: hog-pins2 {
-					marvell,pins = "mpp5", "mpp7", "mpp9";
-					marvell,function = "gpo";
-				};
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "mx25l25635e";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-				};
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * both standard PCIe slots and mini-PCIe
-			 * slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-
-	sound {
-	      compatible = "marvell,a370db-audio";
-	      marvell,audio-controller = <&audio_controller>;
-	      marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
-	      status = "okay";
-	};
-
-	spdif_out: spdif-out {
-	      compatible = "linux,spdif-dit";
-	};
-
-	spdif_in: spdif-in {
-	      compatible = "linux,spdif-dir";
-	};
-};
diff --git a/src/arm/armada-370-mirabox.dts b/src/arm/armada-370-mirabox.dts
deleted file mode 100644
index 097df7d8f0f6..000000000000
--- a/src/arm/armada-370-mirabox.dts
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Device Tree file for Globalscale Mirabox
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Globalscale Mirabox";
-	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected on the PCB to a USB 3.0 XHCI controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			timer@20300 {
-				clock-frequency = <600000000>;
-				status = "okay";
-			};
-
-			pinctrl {
-				pwr_led_pin: pwr-led-pin {
-					marvell,pins = "mpp63";
-					marvell,function = "gpo";
-				};
-
-				stat_led_pins: stat-led-pins {
-					marvell,pins = "mpp64", "mpp65";
-					marvell,function = "gpio";
-				};
-			};
-
-			gpio_leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
-
-				green_pwr_led {
-					label = "mirabox:green:pwr";
-					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-
-				blue_stat_led {
-					label = "mirabox:blue:stat";
-					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				green_stat_led {
-					label = "mirabox:green:stat";
-					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins3>;
-				pinctrl-names = "default";
-				status = "okay";
-				/*
-				 * No CD or WP GPIOs: SDIO interface used for
-				 * Wifi/Bluetooth chip
-				 */
-				 broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pca9505: pca9505@25 {
-					compatible = "nxp,pca9505";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x25>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x400000>;
-				};
-				partition@400000 {
-					label = "Linux";
-					reg = <0x400000 0x400000>;
-				};
-				partition@800000 {
-					label = "Filesystem";
-					reg = <0x800000 0x3f800000>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-370-netgear-rn102.dts b/src/arm/armada-370-netgear-rn102.dts
deleted file mode 100644
index d6d572e5af32..000000000000
--- a/src/arm/armada-370-netgear-rn102.dts
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 102
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 102";
-	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to Marvell SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			pinctrl {
-				power_led_pin: power-led-pin {
-					marvell,pins = "mpp57";
-					marvell,function = "gpio";
-				};
-
-				sata1_led_pin: sata1-led-pin {
-					marvell,pins = "mpp15";
-					marvell,function = "gpio";
-				};
-
-				sata2_led_pin: sata2-led-pin {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				backup_led_pin: backup-led-pin {
-					marvell,pins = "mpp56";
-					marvell,function = "gpio";
-				};
-
-				backup_button_pin: backup-button-pin {
-					marvell,pins = "mpp58";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp62";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				poweroff: poweroff {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				clock-frequency = <100000>;
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isl,isl12057";
-					reg = <0x68>;
-				};
-
-				g762: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&power_led_pin
-			     &sata1_led_pin
-			     &sata2_led_pin
-			     &backup_led_pin>;
-		pinctrl-names = "default";
-
-		blue-power-led {
-			label = "rn102:blue:pwr";
-			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		green-sata1-led {
-			label = "rn102:green:sata1";
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		green-sata2-led {
-			label = "rn102:green:sata2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		green-backup-led {
-			label = "rn102:green:backup";
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin
-			     &reset_button_pin
-			     &backup_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/src/arm/armada-370-netgear-rn104.dts b/src/arm/armada-370-netgear-rn104.dts
deleted file mode 100644
index c5fe8b5dcdc7..000000000000
--- a/src/arm/armada-370-netgear-rn104.dts
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 104
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 104";
-	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to Marvell 88SE9215 SATA controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-
-			pinctrl {
-				poweroff: poweroff {
-					marvell,pins = "mpp60";
-					marvell,function = "gpio";
-				};
-
-				backup_button_pin: backup-button-pin {
-					marvell,pins = "mpp52";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp62";
-					marvell,function = "gpio";
-				};
-
-				backup_led_pin: backup-led-pin {
-					marvell,pins = "mpp63";
-					marvell,function = "gpo";
-				};
-
-				power_led_pin: power-led-pin {
-					marvell,pins = "mpp64";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp65";
-					marvell,function = "gpio";
-				};
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				clock-frequency = <100000>;
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isl,isl12057";
-					reg = <0x68>;
-				};
-
-				g762: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				pca9554: pca9554@23 {
-					compatible = "nxp,pca9554";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x23>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&backup_led_pin &power_led_pin>;
-		pinctrl-names = "default";
-
-		blue-backup-led {
-			label = "rn104:blue:backup";
-			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue-power-led {
-			label = "rn104:blue:pwr";
-			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "keep";
-		};
-
-		blue-sata1-led {
-			label = "rn104:blue:sata1";
-			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata2-led {
-			label = "rn104:blue:sata2";
-			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata3-led {
-			label = "rn104:blue:sata3";
-			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		blue-sata4-led {
-			label = "rn104:blue:sata4";
-			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&backup_button_pin
-			     &power_button_pin
-			     &reset_button_pin>;
-		pinctrl-names = "default";
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/src/arm/armada-370-rd.dts b/src/arm/armada-370-rd.dts
deleted file mode 100644
index 4169f4096ea3..000000000000
--- a/src/arm/armada-370-rd.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 370 Reference Design board
- * (RD-88F6710-A1)
- *
- *  Copied from arch/arm/boot/dts/armada-370-db.dts
- *
- *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-370.dtsi"
-
-/ {
-	model = "Marvell Armada 370 Reference Design";
-	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Internal mini-PCIe connector */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins1>;
-				pinctrl-names = "default";
-				status = "okay";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			gpio-keys {
-				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				button@1 {
-					label = "Software Button";
-					linux,code = <KEY_POWER>;
-					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-		};
-	};
- };
diff --git a/src/arm/armada-370-xp.dtsi b/src/arm/armada-370-xp.dtsi
deleted file mode 100644
index 23227e0027ec..000000000000
--- a/src/arm/armada-370-xp.dtsi
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Ben Dooks <ben.dooks@codethink.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common to the Armada
- * 370 and Armada XP SoC.
- */
-
-/include/ "skeleton64.dtsi"
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Armada 370 and XP SoC";
-	compatible = "marvell,armada-370-xp";
-
-	aliases {
-		eth0 = &eth0;
-		eth1 = &eth1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "marvell,sheeva-v7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&mpic>;
-		pcie-mem-aperture = <0xf8000000 0x7e00000>;
-		pcie-io-aperture  = <0xffe00000 0x100000>;
-
-		devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			rtc@10300 {
-				compatible = "marvell,orion-rtc";
-				reg = <0x10300 0x20>;
-				interrupts = <50>;
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10680 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <31>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <32>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <41>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-			serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <42>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			coredivclk: corediv-clock@18740 {
-				compatible = "marvell,armada-370-corediv-clock";
-				reg = <0x18740 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
-			};
-
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-			};
-
-			coherency-fabric@20200 {
-				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21010 0x1c>;
-			};
-
-			timer@20300 {
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
-			};
-
-			watchdog@20300 {
-				reg = <0x20300 0x34>, <0x20704 0x4>;
-			};
-
-			pmsu@22000 {
-				compatible = "marvell,armada-370-pmsu";
-				reg = <0x22000 0x1000>;
-			};
-
-			usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x500>;
-				interrupts = <45>;
-				status = "disabled";
-			};
-
-			usb@51000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x51000 0x500>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts = <8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x72004 0x4>;
-				clocks = <&gateclk 4>;
-			};
-
-			eth1: ethernet@74000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x74000 0x4000>;
-				interrupts = <10>;
-				clocks = <&gateclk 3>;
-				status = "disabled";
-			};
-
-			sata@a0000 {
-				compatible = "marvell,armada-370-sata";
-				reg = <0xa0000 0x5000>;
-				interrupts = <55>;
-				clocks = <&gateclk 15>, <&gateclk 30>;
-				clock-names = "0", "1";
-				status = "disabled";
-			};
-
-			nand@d0000 {
-				compatible = "marvell,armada370-nand";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <113>;
-				clocks = <&coredivclk 0>;
-				status = "disabled";
-			};
-
-			mvsdio@d4000 {
-				compatible = "marvell,orion-sdio";
-				reg = <0xd4000 0x200>;
-				interrupts = <54>;
-				clocks = <&gateclk 17>;
-				bus-width = <4>;
-				cap-sdio-irq;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				status = "disabled";
-			};
-		};
-	};
-
-	clocks {
-		/* 2 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
-		};
-	};
- };
diff --git a/src/arm/armada-370.dtsi b/src/arm/armada-370.dtsi
deleted file mode 100644
index 21b588b6f6bd..000000000000
--- a/src/arm/armada-370.dtsi
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 370 family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada 370 SoC that are not
- * common to all Armada SoCs.
- */
-
-#include "armada-370-xp.dtsi"
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Marvell Armada 370 family SoC";
-	compatible = "marvell,armada370", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	soc {
-		compatible = "marvell,armada370-mbus", "simple-bus";
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			L2: l2-cache {
-				compatible = "marvell,aurora-outer-cache";
-				reg = <0x08000 0x1000>;
-				cache-id-part = <0x100>;
-				wt-override;
-			};
-
-			i2c0: i2c@11000 {
-				reg = <0x11000 0x20>;
-			};
-
-			i2c1: i2c@11100 {
-				reg = <0x11100 0x20>;
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			pinctrl {
-				compatible = "marvell,mv88f6710-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins1: sdio-pins1 {
-					marvell,pins = "mpp9",  "mpp11", "mpp12",
-							"mpp13", "mpp14", "mpp15";
-					marvell,function = "sd0";
-				};
-
-				sdio_pins2: sdio-pins2 {
-					marvell,pins = "mpp47", "mpp48", "mpp49",
-							"mpp50", "mpp51", "mpp52";
-					marvell,function = "sd0";
-				};
-
-				sdio_pins3: sdio-pins3 {
-					marvell,pins = "mpp48", "mpp49", "mpp50",
-							"mpp51", "mpp52", "mpp53";
-					marvell,function = "sd0";
-				};
-
-				i2c0_pins: i2c0-pins {
-					marvell,pins = "mpp2", "mpp3";
-					marvell,function = "i2c0";
-				};
-
-				i2s_pins1: i2s-pins1 {
-					marvell,pins = "mpp5", "mpp6", "mpp7",
-						       "mpp8", "mpp9", "mpp10",
-						       "mpp12", "mpp13";
-					marvell,function = "audio";
-				};
-
-				i2s_pins2: i2s-pins2 {
-					marvell,pins = "mpp49", "mpp47", "mpp50",
-						       "mpp59", "mpp57", "mpp61",
-						       "mpp62", "mpp60", "mpp58";
-					marvell,function = "audio";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-370-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,armada-370-core-clock";
-				reg = <0x18230 0x08>;
-				#clock-cells = <1>;
-			};
-
-			thermal@18300 {
-				compatible = "marvell,armada370-thermal";
-				reg = <0x18300 0x4
-					0x18304 0x4>;
-				status = "okay";
-			};
-
-			interrupt-controller@20000 {
-				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-370-timer";
-				clocks = <&coreclk 2>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-370-wdt";
-				clocks = <&coreclk 2>;
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x8>;
-			};
-
-			audio_controller: audio-controller@30000 {
-				compatible = "marvell,armada370-audio";
-				reg = <0x30000 0x4000>;
-				interrupts = <93>;
-				clocks = <&gateclk 0>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			usb@50000 {
-				clocks = <&coreclk 0>;
-			};
-
-			usb@51000 {
-				clocks = <&coreclk 0>;
-			};
-
-			xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60A00 0x100>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <51>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <52>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <94>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <95>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-375-db.dts b/src/arm/armada-375-db.dts
deleted file mode 100644
index 929ae00b4063..000000000000
--- a/src/arm/armada-375-db.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 375 evaluation board
- * (DB-88F6720)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-375.dtsi"
-
-/ {
-	model = "Marvell Armada 375 Development Board";
-	compatible = "marvell,a375-db", "marvell,armada375";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-				/*
-				 * SPI conflicts with NAND, so we disable it
-				 * here, and select NAND as the enabled device
-				 * by default.
-				 */
-				status = "disabled";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			pinctrl {
-				sdio_st_pins: sdio-st-pins {
-					marvell,pins = "mpp44", "mpp45";
-					marvell,function = "gpio";
-				};
-			};
-
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
-
-			nand: nand@d0000 {
-				pinctrl-0 = <&nand_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-
-			usb@54000 {
-				status = "okay";
-			};
-
-			usb3@58000 {
-				status = "okay";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
-			ethernet@f0000 {
-				status = "okay";
-
-				eth0@c4000 {
-					status = "okay";
-					phy = <&phy0>;
-					phy-mode = "rgmii-id";
-				};
-
-				eth1@c5000 {
-					status = "okay";
-					phy = <&phy3>;
-					phy-mode = "gmii";
-				};
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-375.dtsi b/src/arm/armada-375.dtsi
deleted file mode 100644
index c1e49e7bf0fa..000000000000
--- a/src/arm/armada-375.dtsi
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 375 family SoC
- *
- * Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Armada 375 family SoC";
-	compatible = "marvell,armada375";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-	};
-
-	clocks {
-		/* 2 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-375-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		compatible = "marvell,armada375-mbus", "marvell,armada370-mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&gic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
-		};
-
-		devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			L2: cache-controller@8000 {
-				compatible = "arm,pl310-cache";
-				reg = <0x8000 0x1000>;
-				cache-unified;
-				cache-level = <2>;
-			};
-
-			scu@c000 {
-				compatible = "arm,cortex-a9-scu";
-				reg = <0xc000 0x58>;
-			};
-
-			timer@c600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xc600 0x20>;
-				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
-				clocks = <&coreclk 2>;
-			};
-
-			gic: interrupt-controller@d000 {
-				compatible = "arm,cortex-a9-gic";
-				#interrupt-cells = <3>;
-				#size-cells = <0>;
-				interrupt-controller;
-				reg = <0xd000 0x1000>,
-				      <0xc100 0x100>;
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0xc0054 0x4>;
-				clocks = <&gateclk 19>;
-			};
-
-			/* Network controller */
-			ethernet@f0000 {
-				compatible = "marvell,armada-375-pp2";
-				reg = <0xf0000 0xa000>, /* Packet Processor regs */
-				      <0xc0000 0x3060>, /* LMS regs */
-				      <0xc4000 0x100>,  /* eth0 regs */
-				      <0xc5000 0x100>;  /* eth1 regs */
-				clocks = <&gateclk 3>, <&gateclk 19>;
-				clock-names = "pp_clk", "gop_clk";
-				status = "disabled";
-
-				eth0: eth0@c4000 {
-					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <0>;
-					status = "disabled";
-				};
-
-				eth1: eth1@c5000 {
-					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <1>;
-					status = "disabled";
-				};
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			pinctrl {
-				compatible = "marvell,mv88f6720-pinctrl";
-				reg = <0x18000 0x24>;
-
-				i2c0_pins: i2c0-pins {
-					marvell,pins = "mpp14",  "mpp15";
-					marvell,function = "i2c0";
-				};
-
-				i2c1_pins: i2c1-pins {
-					marvell,pins = "mpp61",  "mpp62";
-					marvell,function = "i2c1";
-				};
-
-				nand_pins: nand-pins {
-					marvell,pins = "mpp0", "mpp1", "mpp2",
-						"mpp3", "mpp4", "mpp5",
-						"mpp6", "mpp7", "mpp8",
-						"mpp9", "mpp10", "mpp11",
-						"mpp12", "mpp13";
-					marvell,function = "nand";
-				};
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp24",  "mpp25", "mpp26",
-						     "mpp27", "mpp28", "mpp29";
-					marvell,function = "sd";
-				};
-
-				spi0_pins: spi0-pins {
-					marvell,pins = "mpp0",  "mpp1", "mpp4",
-						     "mpp5", "mpp8", "mpp9";
-					marvell,function = "spi0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-375-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-375-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
-			};
-
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-						      <&mpic 5>,
-						      <&mpic 6>;
-				clocks = <&coreclk 0>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-375-wdt";
-				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
-				clocks = <&coreclk 0>;
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x10>;
-			};
-
-			coherency-fabric@21010 {
-				compatible = "marvell,armada-375-coherency-fabric";
-				reg = <0x21010 0x1c>;
-			};
-
-			usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x500>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 18>;
-				status = "disabled";
-			};
-
-			usb@54000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x54000 0x500>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			usb3@58000 {
-				compatible = "marvell,armada-375-xhci";
-				reg = <0x58000 0x20000>,<0x5b880 0x80>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 16>;
-				status = "disabled";
-			};
-
-			xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60A00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 23>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			sata@a0000 {
-				compatible = "marvell,orion-sata";
-				reg = <0xa0000 0x5000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 14>, <&gateclk 20>;
-				clock-names = "0", "1";
-				status = "disabled";
-			};
-
-			nand@d0000 {
-				compatible = "marvell,armada370-nand";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			mvsdio@d4000 {
-				compatible = "marvell,orion-sdio";
-				reg = <0xd4000 0x200>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 17>;
-				bus-width = <4>;
-				cap-sdio-irq;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				status = "disabled";
-			};
-
-			thermal@e8078 {
-				compatible = "marvell,armada375-thermal";
-				reg = <0xe8078 0x4>, <0xe807c 0x8>;
-				status = "okay";
-			};
-
-			coreclk: mvebu-sar@e8204 {
-				compatible = "marvell,armada-375-core-clock";
-				reg = <0xe8204 0x04>;
-				#clock-cells = <1>;
-			};
-
-			coredivclk: corediv-clock@e8250 {
-				compatible = "marvell,armada-375-corediv-clock";
-				reg = <0xe8250 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-		};
-	};
-};
diff --git a/src/arm/armada-380.dtsi b/src/arm/armada-380.dtsi
deleted file mode 100644
index 4173a8ab34e7..000000000000
--- a/src/arm/armada-380.dtsi
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 380 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 380 family SoC";
-	compatible = "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv88f6810-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
-
-			/* x1 port */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-385-db.dts b/src/arm/armada-385-db.dts
deleted file mode 100644
index 1af886f1e486..000000000000
--- a/src/arm/armada-385-db.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 385 evaluation board
- * (DB-88F6820)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Development Board";
-	compatible = "marvell,a385-db", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "w25q32";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "ok";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sata@e0000 {
-				status = "okay";
-			};
-
-			flash@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
-
-			sdhci@d8000 {
-				clock-frequency = <200000000>;
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-385-rd.dts b/src/arm/armada-385-rd.dts
deleted file mode 100644
index aaca2861dc87..000000000000
--- a/src/arm/armada-385-rd.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Device Tree file for Marvell Armada 385 Reference Design board
- * (RD-88F6820-AP)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-385.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Reference Design";
-	compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * One PCIe units is accessible through
-			 * standard PCIe slot on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-385.dtsi b/src/arm/armada-385.dtsi
deleted file mode 100644
index 6283d7912f71..000000000000
--- a/src/arm/armada-385.dtsi
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 385 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 385 family SoC";
-	compatible = "marvell,armada385", "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv88f6820-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-		};
-
-		pcie-controller {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
-
-			/*
-			 * This port can be either x4 or x1. When
-			 * configured in x4 by the bootloader, then
-			 * pcie@4,0 is not available.
-			 */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			/*
-			 * x1 port only available when pcie@1,0 is
-			 * configured as a x1 port
-			 */
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-38x.dtsi b/src/arm/armada-38x.dtsi
deleted file mode 100644
index 242d0ecc99f3..000000000000
--- a/src/arm/armada-38x.dtsi
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 38x family of SoCs.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Armada 38x family SoC";
-	compatible = "marvell,armada380";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		eth0 = &eth0;
-		eth1 = &eth1;
-		eth2 = &eth2;
-	};
-
-	soc {
-		compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
-			     "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		interrupt-parent = <&gic>;
-		pcie-mem-aperture = <0xe0000000 0x8000000>;
-		pcie-io-aperture  = <0xe8000000 0x100000>;
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
-		};
-
-		devbus-bootcs {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs0 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs1 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs2 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		devbus-cs3 {
-			compatible = "marvell,mvebu-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
-			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&coreclk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			L2: cache-controller@8000 {
-				compatible = "arm,pl310-cache";
-				reg = <0x8000 0x1000>;
-				cache-unified;
-				cache-level = <2>;
-			};
-
-			scu@c000 {
-				compatible = "arm,cortex-a9-scu";
-				reg = <0xc000 0x58>;
-			};
-
-			timer@c600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xc600 0x20>;
-				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
-				clocks = <&coreclk 2>;
-			};
-
-			gic: interrupt-controller@d000 {
-				compatible = "arm,cortex-a9-gic";
-				#interrupt-cells = <3>;
-				#size-cells = <0>;
-				interrupt-controller;
-				reg = <0xd000 0x1000>,
-				      <0xc100 0x100>;
-			};
-
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			serial@12100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			pinctrl {
-				compatible = "marvell,mv88f6820-pinctrl";
-				reg = <0x18000 0x20>;
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <28>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-380-system-controller",
-					     "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-380-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18600 {
-				compatible = "marvell,armada-380-core-clock";
-				reg = <0x18600 0x04>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
-			};
-
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
-				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-380-timer",
-					     "marvell,armada-xp-timer";
-				reg = <0x20300 0x30>, <0x21040 0x30>;
-				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-						      <&mpic 5>,
-						      <&mpic 6>;
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-380-wdt";
-				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x10>;
-			};
-
-			mpcore-soc-ctrl@20d20 {
-				compatible = "marvell,armada-380-mpcore-soc-ctrl";
-				reg = <0x20d20 0x6c>;
-			};
-
-			coherency-fabric@21010 {
-				compatible = "marvell,armada-380-coherency-fabric";
-				reg = <0x21010 0x1c>;
-			};
-
-			pmsu@22000 {
-				compatible = "marvell,armada-380-pmsu";
-				reg = <0x22000 0x1000>;
-			};
-
-			eth1: ethernet@30000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x30000 0x4000>;
-				interrupts-extended = <&mpic 10>;
-				clocks = <&gateclk 3>;
-				status = "disabled";
-			};
-
-			eth2: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x34000 0x4000>;
-				interrupts-extended = <&mpic 12>;
-				clocks = <&gateclk 2>;
-				status = "disabled";
-			};
-
-			usb@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x58000 0x500>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 18>;
-				status = "disabled";
-			};
-
-			xor@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60a00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts-extended = <&mpic 8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x72004 0x4>;
-				clocks = <&gateclk 4>;
-			};
-
-			sata@a8000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xa8000 0x2000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 15>;
-				status = "disabled";
-			};
-
-			sata@e0000 {
-				compatible = "marvell,armada-380-ahci";
-				reg = <0xe0000 0x2000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 30>;
-				status = "disabled";
-			};
-
-			coredivclk: clock@e4250 {
-				compatible = "marvell,armada-380-corediv-clock";
-				reg = <0xe4250 0xc>;
-				#clock-cells = <1>;
-				clocks = <&mainpll>;
-				clock-output-names = "nand";
-			};
-
-			thermal@e8078 {
-				compatible = "marvell,armada380-thermal";
-				reg = <0xe4078 0x4>, <0xe4074 0x4>;
-				status = "okay";
-			};
-
-			flash@d0000 {
-				compatible = "marvell,armada370-nand";
-				reg = <0xd0000 0x54>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coredivclk 0>;
-				status = "disabled";
-			};
-
-			sdhci@d8000 {
-				compatible = "marvell,armada-380-sdhci";
-				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
-				interrupts = <0 25 0x4>;
-				clocks = <&gateclk 17>;
-				mrvl,clk-delay-cycles = <0x1F>;
-				status = "disabled";
-			};
-
-			usb3@f0000 {
-				compatible = "marvell,armada-380-xhci";
-				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			usb3@f8000 {
-				compatible = "marvell,armada-380-xhci";
-				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-		};
-	};
-
-	clocks {
-		/* 2 GHz fixed main PLL */
-		mainpll: mainpll {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <2000000000>;
-		};
-
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
diff --git a/src/arm/armada-xp-axpwifiap.dts b/src/arm/armada-xp-axpwifiap.dts
deleted file mode 100644
index a55a97a70505..000000000000
--- a/src/arm/armada-xp-axpwifiap.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Device Tree file for Marvell RD-AXPWiFiAP.
- *
- * Note: this board is shipped with a new generation boot loader that
- * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
- * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
- * used.
- *
- * Copyright (C) 2013 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Marvell RD-AXPWiFiAP";
-	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* First mini-PCIe port */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Second mini-PCIe port */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Renesas uPD720202 USB 3.0 controller */
-			pcie@3,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				pinctrl-0 = <&pmx_phy_int>;
-				pinctrl-names = "default";
-
-				pmx_ge0: pmx-ge0 {
-					marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-						       "mpp4", "mpp5", "mpp6", "mpp7",
-						       "mpp8", "mpp9", "mpp10", "mpp11";
-					marvell,function = "ge0";
-				};
-
-				pmx_ge1: pmx-ge1 {
-					marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
-						       "mpp16", "mpp17", "mpp18", "mpp19",
-						       "mpp20", "mpp21", "mpp22", "mpp23";
-					marvell,function = "ge1";
-				};
-
-				pmx_keys: pmx-keys {
-					marvell,pins = "mpp33";
-					marvell,function = "gpio";
-				};
-
-				pmx_spi: pmx-spi {
-					marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
-					marvell,function = "spi";
-				};
-
-				pmx_phy_int: pmx-phy-int {
-					marvell,pins = "mpp32";
-					marvell,function = "gpio";
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			serial@12100 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <1>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				pinctrl-0 = <&pmx_ge0>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				pinctrl-0 = <&pmx_ge1>;
-				pinctrl-names = "default";
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-				pinctrl-0 = <&pmx_spi>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_keys>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Factory Reset Button";
-			linux,code = <KEY_SETUP>;
-			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/src/arm/armada-xp-db.dts b/src/arm/armada-xp-db.dts
deleted file mode 100644
index 42ddb2864365..000000000000
--- a/src/arm/armada-xp-db.dts
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP evaluation board
- * (DB-78460-BP)
- *
- * Copyright (C) 2012-2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-  *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Evaluation Board";
-	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 16 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x1000000>;
-				bank-width = <2>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * All 6 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-			pcie@3,0 {
-				/* Port 0, Lane 2 */
-				status = "okay";
-			};
-			pcie@4,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <25>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <27>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "sgmii";
-			};
-
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				/* No CD or WP GPIOs */
-				broken-cd;
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			usb@52000 {
-				status = "okay";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p64";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-gp.dts b/src/arm/armada-xp-gp.dts
deleted file mode 100644
index 0478c55ca656..000000000000
--- a/src/arm/armada-xp-gp.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP development board
- * (DB-MV784MP-GP)
- *
- * Copyright (C) 2013-2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Note: this Device Tree assumes that the bootloader has remapped the
- * internal registers to 0xf1000000 (instead of the default
- * 0xd0000000). The 0xf1000000 is the default used by the recent,
- * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
- * boards were delivered with an older version of the bootloader that
- * left internal registers mapped at 0xd0000000. If you are in this
- * situation, you should either update your bootloader (preferred
- * solution) or the below Device Tree should be adjusted.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
-	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		/*
-                 * 8 GB of plug-in RAM modules by default.The amount
-                 * of memory available can be changed by the
-                 * bootloader according the size of the module
-                 * actually plugged. However, memory between
-                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
-                 * the address range used for I/O (internal registers,
-                 * MBus windows).
-		 */
-		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
-		      <0x00000001 0x00000000 0x00000001 0x00000000>;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 16 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x1000000>;
-				bank-width = <2>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * The 3 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <16>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <17>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <18>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <19>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "qsgmii";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "qsgmii";
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "qsgmii";
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "qsgmii";
-			};
-
-			/* Front-side USB slot */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* Back-side USB slot */
-			usb@51000 {
-				status = "okay";
-			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-lenovo-ix4-300d.dts b/src/arm/armada-xp-lenovo-ix4-300d.dts
deleted file mode 100644
index 469cf7137595..000000000000
--- a/src/arm/armada-xp-lenovo-ix4-300d.dts
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Device Tree file for Lenovo Iomega ix4-300d
- *
- * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "Lenovo Iomega ix4-300d";
-	compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
-		     "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-		stdout-path = "/soc/internal-regs/serial@12000";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Quad port sata: Marvell 88SX7042 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* USB 3.0 xHCI controller: NEC D720200F1 */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				poweroff_pin: poweroff-pin {
-					marvell,pins = "mpp24";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp44";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp45";
-					marvell,function = "gpio";
-				};
-				select_button_pin: select-button-pin {
-					marvell,pins = "mpp41";
-					marvell,function = "gpio";
-				};
-
-				scroll_button_pin: scroll-button-pin {
-					marvell,pins = "mpp42";
-					marvell,function = "gpio";
-				};
-
-				hdd_led_pin: hdd-led-pin {
-					marvell,pins = "mpp26";
-					marvell,function = "gpio";
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb@51000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				clock-frequency = <400000>;
-				status = "okay";
-
-				adt7473@2e {
-					compatible = "adi,adt7473";
-					reg = <0x2e>;
-				};
-
-				pcf8563@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0xe0000>;
-					read-only;
-				};
-
-				partition@e0000 {
-					label = "u-boot-env";
-					reg = <0xe0000 0x20000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u-boot-env2";
-					reg = <0x100000 0x20000>;
-					read-only;
-				};
-
-				partition@120000 {
-					label = "zImage";
-					reg = <0x120000 0x400000>;
-				};
-
-				partition@520000 {
-					label = "initrd";
-					reg = <0x520000 0x400000>;
-				};
-
-				partition@xE00000 {
-					label = "boot";
-					reg = <0xE00000 0x3F200000>;
-				};
-
-				partition@flash {
-					label = "flash";
-					reg = <0x0 0x40000000>;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin &reset_button_pin
-			&select_button_pin &scroll_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-
-		select-button {
-			label = "Select Button";
-			linux,code = <BTN_SELECT>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		scroll-button {
-			label = "Scroll Button";
-			linux,code = <KEY_SCROLLDOWN>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	spi3 {
-		compatible = "spi-gpio";
-		status = "okay";
-		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
-		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio_spi: gpio_spi@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <2>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&hdd_led_pin>;
-		pinctrl-names = "default";
-
-		hdd-led {
-			label = "ix4-300d:hdd:blue";
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		power-led {
-			label = "ix4-300d:power:white";
-			gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
-			/* init blinking while booting */
-			linux,default-trigger = "timer";
-			default-state = "on";
-		};
-
-		sysfail-led {
-			label = "ix4-300d:sysfail:red";
-			gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		sys-led {
-			label = "ix4-300d:sys:blue";
-			gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		hddfail-led {
-			label = "ix4-300d:hddfail:red";
-			gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-	};
-
-	/*
-	 * Warning: you need both eth1 & 0 PHY initialized (i.e having
-	 * them up does the tweak) for poweroff to shutdown otherwise it
-	 * reboots
-	 */
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff_pin>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/src/arm/armada-xp-matrix.dts b/src/arm/armada-xp-matrix.dts
deleted file mode 100644
index 7e291e2ef4b3..000000000000
--- a/src/arm/armada-xp-matrix.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Device Tree file for Marvell Armada XP Matrix board
- *
- * Copyright (C) 2013 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "armada-xp-mv78460.dtsi"
-
-/ {
-	model = "Marvell Armada XP Matrix Board";
-	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		/*
-		 * This board has 4 GB of RAM, but the last 256 MB of
-		 * RAM are not usable due to the overlap with the MBus
-		 * Window address range
-		 */
-		reg = <0 0x00000000 0 0xf0000000>;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			serial@12200 {
-				status = "okay";
-			};
-			serial@12300 {
-				status = "okay";
-			};
-
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy-mode = "sgmii";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			pcie-controller {
-				status = "okay";
-
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-			};
-
-			usb@50000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-mv78230.dtsi b/src/arm/armada-xp-mv78230.dtsi
deleted file mode 100644
index 2592e1c13560..000000000000
--- a/src/arm/armada-xp-mv78230.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP MV78230 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78230 SoC";
-	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x1 only.
-		 */
-		pcie-controller {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv78230-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp30", "mpp31", "mpp32",
-						       "mpp33", "mpp34", "mpp35";
-					marvell,function = "sd0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <17>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>;
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-mv78260.dtsi b/src/arm/armada-xp-mv78260.dtsi
deleted file mode 100644
index 480e237a870f..000000000000
--- a/src/arm/armada-xp-mv78260.dtsi
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP MV78260 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78260 SoC";
-	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		eth3 = &eth3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4 only.
-		 */
-		pcie-controller {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv78260-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp30", "mpp31", "mpp32",
-						       "mpp33", "mpp34", "mpp35";
-					marvell,function = "sd0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-mv78460.dtsi b/src/arm/armada-xp-mv78460.dtsi
deleted file mode 100644
index 2c7b1fef4703..000000000000
--- a/src/arm/armada-xp-mv78460.dtsi
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP MV78460 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78460 SoC";
-	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		eth3 = &eth3;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <2>;
-			clocks = <&cpuclk 2>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <3>;
-			clocks = <&cpuclk 3>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. Two units are
-		 * x4/x1.
-		 */
-		pcie-controller {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
-
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			pcie@10,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				compatible = "marvell,mv78460-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp30", "mpp31", "mpp32",
-						       "mpp33", "mpp34", "mpp35";
-					marvell,function = "sd0";
-				};
-			};
-
-			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp-netgear-rn2120.dts b/src/arm/armada-xp-netgear-rn2120.dts
deleted file mode 100644
index 0cf999abc4ed..000000000000
--- a/src/arm/armada-xp-netgear-rn2120.dts
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS 2120
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-xp-mv78230.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS 2120";
-	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to first Marvell 88SE9170 SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to second Marvell 88SE9170 SATA controller */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Connected to Fresco Logic FL1009 USB 3.0 controller */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			pinctrl {
-				poweroff: poweroff {
-					marvell,pins = "mpp42";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp27";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp41";
-					marvell,function = "gpio";
-				};
-
-				sata1_led_pin: sata1-led-pin {
-					marvell,pins = "mpp31";
-					marvell,function = "gpio";
-				};
-
-				sata2_led_pin: sata2-led-pin {
-					marvell,pins = "mpp40";
-					marvell,function = "gpio";
-				};
-
-				sata3_led_pin: sata3-led-pin {
-					marvell,pins = "mpp44";
-					marvell,function = "gpio";
-				};
-
-				sata4_led_pin: sata4-led-pin {
-					marvell,pins = "mpp47";
-					marvell,function = "gpio";
-				};
-
-				sata1_power_pin: sata1-power-pin {
-					marvell,pins = "mpp24";
-					marvell,function = "gpio";
-				};
-
-				sata2_power_pin: sata2-power-pin {
-					marvell,pins = "mpp25";
-					marvell,function = "gpio";
-				};
-
-				sata3_power_pin: sata3-power-pin {
-					marvell,pins = "mpp26";
-					marvell,function = "gpio";
-				};
-
-				sata4_power_pin: sata4-power-pin {
-					marvell,pins = "mpp28";
-					marvell,function = "gpio";
-				};
-
-				sata1_pres_pin: sata1-pres-pin {
-					marvell,pins = "mpp32";
-					marvell,function = "gpio";
-				};
-
-				sata2_pres_pin: sata2-pres-pin {
-					marvell,pins = "mpp33";
-					marvell,function = "gpio";
-				};
-
-				sata3_pres_pin: sata3-pres-pin {
-					marvell,pins = "mpp34";
-					marvell,function = "gpio";
-				};
-
-				sata4_pres_pin: sata4-pres-pin {
-					marvell,pins = "mpp35";
-					marvell,function = "gpio";
-				};
-
-				err_led_pin: err-led-pin {
-					marvell,pins = "mpp45";
-					marvell,function = "gpio";
-				};
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
-			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				clock-frequency = <400000>;
-				status = "okay";
-
-				isl12057: isl12057@68 {
-					compatible = "isl,isl12057";
-					reg = <0x68>;
-				};
-
-				/* Controller for rear fan #1 of 3 (Protechnic
-				 * MGT4012XB-O20, 8000RPM) near eSATA port */
-				g762_fan1: g762@3e {
-					compatible = "gmt,g762";
-					reg = <0x3e>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/*  Controller for rear (center) fan #2 of 3 */
-				g762_fan2: g762@48 {
-					compatible = "gmt,g762";
-					reg = <0x48>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/*  Controller for rear fan #3 of 3 */
-				g762_fan3: g762@49 {
-					compatible = "gmt,g762";
-					reg = <0x49>;
-					clocks = <&g762_clk>; /* input clock */
-					fan_gear_mode = <0>;
-					fan_startv = <1>;
-					pwm_polarity = <0>;
-				};
-
-				/* Temperature sensor */
-				g751: g751@4c {
-					compatible = "gmt,g751";
-					reg = <0x4c>;
-				};
-			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
-		};
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
-			     &sata3_led_pin &sata4_led_pin>;
-		pinctrl-names = "default";
-
-		red-sata1-led {
-			label = "rn2120:red:sata1";
-			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata2-led {
-			label = "rn2120:red:sata2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata3-led {
-			label = "rn2120:red:sata3";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-sata4-led {
-			label = "rn2120:red:sata4";
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red-err-led {
-			label = "rn2120:red:err";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&power_button_pin &reset_button_pin>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/src/arm/armada-xp-openblocks-ax3-4.dts b/src/arm/armada-xp-openblocks-ax3-4.dts
deleted file mode 100644
index 4e5a59ee1501..000000000000
--- a/src/arm/armada-xp-openblocks-ax3-4.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Device Tree file for OpenBlocks AX3-4 board
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-xp-mv78260.dtsi"
-
-/ {
-	model = "PlatHome OpenBlocks AX3-4 board";
-	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
-
-		devbus-bootcs {
-			status = "okay";
-
-			/* Device Bus parameters are required */
-
-			/* Read parameters */
-			devbus,bus-width    = <16>;
-			devbus,turn-off-ps  = <60000>;
-			devbus,badr-skew-ps = <0>;
-			devbus,acc-first-ps = <124000>;
-			devbus,acc-next-ps  = <248000>;
-			devbus,rd-setup-ps  = <0>;
-			devbus,rd-hold-ps   = <0>;
-
-			/* Write parameters */
-			devbus,sync-enable = <0>;
-			devbus,wr-high-ps  = <60000>;
-			devbus,wr-low-ps   = <60000>;
-			devbus,ale-wr-ps   = <60000>;
-
-			/* NOR 128 MiB */
-			nor@0 {
-				compatible = "cfi-flash";
-				reg = <0 0x8000000>;
-				bank-width = <2>;
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
-			serial@12000 {
-				status = "okay";
-			};
-			serial@12100 {
-				status = "okay";
-			};
-			pinctrl {
-				led_pins: led-pins-0 {
-					marvell,pins = "mpp49", "mpp51", "mpp53";
-					marvell,function = "gpio";
-				};
-			};
-			leds {
-				compatible = "gpio-leds";
-				pinctrl-names = "default";
-				pinctrl-0 = <&led_pins>;
-
-				red_led {
-					label = "red_led";
-					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				yellow_led {
-					label = "yellow_led";
-					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-					default-state = "off";
-				};
-
-				green_led {
-					label = "green_led";
-					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-					default-state = "keep";
-				};
-			};
-
-			gpio_keys {
-				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				button@1 {
-					label = "Init Button";
-					linux,code = <KEY_POWER>;
-					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "sgmii";
-			};
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "sgmii";
-			};
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy2>;
-				phy-mode = "sgmii";
-			};
-			ethernet@34000 {
-				status = "okay";
-				phy = <&phy3>;
-				phy-mode = "sgmii";
-			};
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <400000>;
-			};
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <400000>;
-
-				s35390a: s35390a@30 {
-					compatible = "s35390a";
-					reg = <0x30>;
-				};
-			};
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
-
-			/* Front side USB 0 */
-			usb@50000 {
-				status = "okay";
-			};
-
-			/* Front side USB 1 */
-			usb@51000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/armada-xp.dtsi b/src/arm/armada-xp.dtsi
deleted file mode 100644
index bff9f6c18db1..000000000000
--- a/src/arm/armada-xp.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Ben Dooks <ben.dooks@codethink.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Contains definitions specific to the Armada XP SoC that are not
- * common to all Armada SoCs.
- */
-
-#include "armada-370-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP family SoC";
-	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		eth2 = &eth2;
-	};
-
-	soc {
-		compatible = "marvell,armadaxp-mbus", "simple-bus";
-
-		bootrom {
-			compatible = "marvell,bootrom";
-			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
-		};
-
-		internal-regs {
-			L2: l2-cache {
-				compatible = "marvell,aurora-system-cache";
-				reg = <0x08000 0x1000>;
-				cache-id-part = <0x100>;
-				wt-override;
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x100>;
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x100>;
-			};
-
-			serial@12200 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12200 0x100>;
-				reg-shift = <2>;
-				interrupts = <43>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-			serial@12300 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x12300 0x100>;
-				reg-shift = <2>;
-				interrupts = <44>;
-				reg-io-width = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x500>;
-			};
-
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-xp-gating-clock";
-				reg = <0x18220 0x4>;
-				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
-			};
-
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,armada-xp-core-clock";
-				reg = <0x18230 0x08>;
-				#clock-cells = <1>;
-			};
-
-			thermal@182b0 {
-				compatible = "marvell,armadaxp-thermal";
-				reg = <0x182b0 0x4
-					0x184d0 0x4>;
-				status = "okay";
-			};
-
-			cpuclk: clock-complex@18700 {
-				#clock-cells = <1>;
-				compatible = "marvell,armada-xp-cpu-clock";
-				reg = <0x18700 0xA0>, <0x1c054 0x10>;
-				clocks = <&coreclk 1>;
-			};
-
-			interrupt-controller@20000 {
-			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-xp-timer";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-xp-wdt";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x20>;
-			};
-
-			eth2: ethernet@30000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x30000 0x4000>;
-				interrupts = <12>;
-				clocks = <&gateclk 2>;
-				status = "disabled";
-			};
-
-			usb@50000 {
-				clocks = <&gateclk 18>;
-			};
-
-			usb@51000 {
-				clocks = <&gateclk 19>;
-			};
-
-			usb@52000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x52000 0x500>;
-				interrupts = <47>;
-				clocks = <&gateclk 20>;
-				status = "disabled";
-			};
-
-			xor@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gateclk 22>;
-				status = "okay";
-
-				xor10 {
-					interrupts = <51>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor11 {
-					interrupts = <52>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-
-			xor@f0900 {
-				compatible = "marvell,orion-xor";
-				reg = <0xF0900 0x100
-				       0xF0B00 0x100>;
-				clocks = <&gateclk 28>;
-				status = "okay";
-
-				xor00 {
-					interrupts = <94>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-				xor01 {
-					interrupts = <95>;
-					dmacap,memcpy;
-					dmacap,xor;
-					dmacap,memset;
-				};
-			};
-		};
-	};
-
-	clocks {
-		/* 25 MHz reference crystal */
-		refclk: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-};
diff --git a/src/arm/armv7-m.dtsi b/src/arm/armv7-m.dtsi
deleted file mode 100644
index 5a660d0faf42..000000000000
--- a/src/arm/armv7-m.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-#include "skeleton.dtsi"
-
-/ {
-	nvic: nv-interrupt-controller  {
-		compatible = "arm,armv7m-nvic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xe000e100 0xc00>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&nvic>;
-		ranges;
-	};
-};
diff --git a/src/arm/atlas6-evb.dts b/src/arm/atlas6-evb.dts
deleted file mode 100644
index ab042ca8dea1..000000000000
--- a/src/arm/atlas6-evb.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas6 Evaluation Board
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "atlas6.dtsi"
-
-/ {
-	model = "CSR SiRFatlas6 Evaluation Board";
-	compatible = "sirf,atlas6-cb", "sirf,atlas6";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	axi {
-		peri-iobg {
-			uart@b0060000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart1_pins_a>;
-			};
-			spi@b00d0000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins_a>;
-				spi@0 {
-					compatible = "spidev";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-			spi@b0170000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins_a>;
-			};
-			i2c0: i2c@b00e0000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				lcd@40 {
-					compatible = "sirf,lcd";
-					reg = <0x40>;
-				};
-			};
-
-		};
-		disp-iobg {
-			lcd@90010000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcd_24pins_a>;
-			};
-		};
-	};
-	display: display@0 {
-	    panels {
-		panel0: panel@0 {
-			panel-name = "Innolux TFT";
-			hactive = <800>;
-			vactive = <480>;
-			left_margin = <20>;
-			right_margin = <234>;
-			upper_margin = <3>;
-			lower_margin = <41>;
-			hsync_len = <3>;
-			vsync_len = <2>;
-			pixclock = <33264000>;
-			sync = <3>;
-			timing = <0x88>;
-			};
-	    };
-	};
-};
diff --git a/src/arm/atlas6.dtsi b/src/arm/atlas6.dtsi
deleted file mode 100644
index bb22842a0826..000000000000
--- a/src/arm/atlas6.dtsi
+++ /dev/null
@@ -1,787 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas6 SoC
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
-	compatible = "sirf,atlas6";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			clocks = <&clks 12>;
-			operating-points = <
-				/* kHz    uV */
-				200000  1025000
-				400000  1025000
-				600000  1050000
-				800000  1100000
-			>;
-			clock-latency = <150000>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <29>;
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clks: clock-controller@88000000 {
-				compatible = "sirf,atlas6-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-				#clock-cells = <1>;
-			};
-
-			rstc: reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-				#reset-cells = <1>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-
-			cphifbg@88030000 {
-				compatible = "sirf,prima2-cphifbg";
-				reg = <0x88030000 0x1000>;
-				clocks = <&clks 42>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x2000>;
-				interrupts = <27>;
-				clocks = <&clks 5>;
-			};
-
-			memc-monitor {
-				compatible = "sirf,prima2-memcmon";
-				reg = <0x90002000 0x200>;
-				interrupts = <4>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			lcd@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-				clocks = <&clks 34>;
-				display=<&display>;
-				/* later transfer to pwm */
-				bl-gpio = <&gpio 7 0>;
-				default-panel = <&panel0>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-				clocks = <&clks 35>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx510";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		graphics2d-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			ble@a0000000 {
-				compatible = "sirf,atlas6-ble";
-				reg = <0xa0000000 0x2000>;
-				interrupts = <5>;
-				clocks = <&clks 33>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-				resets = <&rstc 1>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-				clocks = <&clks 9>;
-				resets = <&rstc 2>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-				clocks = <&clks 8>;
-				resets = <&rstc 0>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>,
-			       <0x56000000 0x56000000 0x1b00000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-				clocks = <&clks 11>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-				clocks = <&clks 26>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-				clocks = <&clks 27>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x1000>;
-				interrupts = <17>;
-				fifosize = <128>;
-				clocks = <&clks 13>;
-				dmas = <&dmac1 5>, <&dmac0 2>;
-				dma-names = "rx", "tx";
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x1000>;
-				interrupts = <18>;
-				fifosize = <32>;
-				clocks = <&clks 14>;
-				dma-names = "no-rx", "no-tx";
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x1000>;
-				interrupts = <19>;
-				fifosize = <128>;
-				clocks = <&clks 15>;
-				dmas = <&dmac0 6>, <&dmac0 7>;
-				dma-names = "rx", "tx";
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-				fifosize = <128>;
-				clocks = <&clks 28>;
-				dmas = <&dmac1 1>, <&dmac1 2>;
-				dma-names = "rx", "tx";
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-				fifosize = <128>;
-				clocks = <&clks 29>;
-				dmas = <&dmac0 14>, <&dmac0 15>;
-				dma-names = "rx", "tx";
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-				clocks = <&clks 24>;
-				#dma-cells = <1>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-				clocks = <&clks 25>;
-				#dma-cells = <1>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-				clocks = <&clks 31>;
-				interrupts = <14>;
-				sirf,vip-dma-rx-channel = <16>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac1 9>,
-				     <&dmac1 4>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 19>;
-				status = "disabled";
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac0 12>,
-				     <&dmac0 13>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 20>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 17>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 18>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-				clocks = <&clks 16>;
-			};
-
-			gpio: pinctrl@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas6-pinctrl";
-				reg = <0xb0120000 0x10000>;
-				interrupts = <43 44 45 46 47>;
-				gpio-controller;
-				interrupt-controller;
-
-				lcd_16pins_a: lcd0@0 {
-					lcd {
-						sirf,pins = "lcd_16bitsgrp";
-						sirf,function = "lcd_16bits";
-					};
-				};
-				lcd_18pins_a: lcd0@1 {
-					lcd {
-						sirf,pins = "lcd_18bitsgrp";
-						sirf,function = "lcd_18bits";
-					};
-				};
-				lcd_24pins_a: lcd0@2 {
-					lcd {
-						sirf,pins = "lcd_24bitsgrp";
-						sirf,function = "lcd_24bits";
-					};
-				};
-				lcdrom_pins_a: lcdrom0@0 {
-					lcd {
-						sirf,pins = "lcdromgrp";
-						sirf,function = "lcdrom";
-					};
-				};
-				uart0_pins_a: uart0@0 {
-					uart {
-						sirf,pins = "uart0grp";
-						sirf,function = "uart0";
-					};
-				};
-				uart0_noflow_pins_a: uart0@1 {
-					uart {
-						sirf,pins = "uart0_nostreamctrlgrp";
-						sirf,function = "uart0_nostreamctrl";
-					};
-				};
-				uart1_pins_a: uart1@0 {
-					uart {
-						sirf,pins = "uart1grp";
-						sirf,function = "uart1";
-					};
-				};
-				uart2_pins_a: uart2@0 {
-					uart {
-						sirf,pins = "uart2grp";
-						sirf,function = "uart2";
-					};
-				};
-				uart2_noflow_pins_a: uart2@1 {
-					uart {
-						sirf,pins = "uart2_nostreamctrlgrp";
-						sirf,function = "uart2_nostreamctrl";
-					};
-				};
-				spi0_pins_a: spi0@0 {
-					spi {
-						sirf,pins = "spi0grp";
-						sirf,function = "spi0";
-					};
-				};
-				spi1_pins_a: spi1@0 {
-					spi {
-						sirf,pins = "spi1grp";
-						sirf,function = "spi1";
-					};
-				};
-				i2c0_pins_a: i2c0@0 {
-					i2c {
-						sirf,pins = "i2c0grp";
-						sirf,function = "i2c0";
-					};
-				};
-				i2c1_pins_a: i2c1@0 {
-					i2c {
-						sirf,pins = "i2c1grp";
-						sirf,function = "i2c1";
-					};
-				};
-                                pwm0_pins_a: pwm0@0 {
-                                        pwm {
-                                                sirf,pins = "pwm0grp";
-                                                sirf,function = "pwm0";
-                                        };
-                                };
-                                pwm1_pins_a: pwm1@0 {
-                                        pwm {
-                                                sirf,pins = "pwm1grp";
-                                                sirf,function = "pwm1";
-                                        };
-                                };
-                                pwm2_pins_a: pwm2@0 {
-                                        pwm {
-                                                sirf,pins = "pwm2grp";
-                                                sirf,function = "pwm2";
-                                        };
-                                };
-                                pwm3_pins_a: pwm3@0 {
-                                        pwm {
-                                                sirf,pins = "pwm3grp";
-                                                sirf,function = "pwm3";
-                                        };
-                                };
-				pwm4_pins_a: pwm4@0 {
-                                        pwm {
-                                                sirf,pins = "pwm4grp";
-                                                sirf,function = "pwm4";
-                                        };
-                                };
-                                gps_pins_a: gps@0 {
-                                        gps {
-                                                sirf,pins = "gpsgrp";
-                                                sirf,function = "gps";
-                                        };
-                                };
-                                vip_pins_a: vip@0 {
-                                        vip {
-                                                sirf,pins = "vipgrp";
-                                                sirf,function = "vip";
-                                        };
-                                };
-                                sdmmc0_pins_a: sdmmc0@0 {
-                                        sdmmc0 {
-                                                sirf,pins = "sdmmc0grp";
-                                                sirf,function = "sdmmc0";
-                                        };
-                                };
-                                sdmmc1_pins_a: sdmmc1@0 {
-                                        sdmmc1 {
-                                                sirf,pins = "sdmmc1grp";
-                                                sirf,function = "sdmmc1";
-                                        };
-                                };
-                                sdmmc2_pins_a: sdmmc2@0 {
-                                        sdmmc2 {
-                                                sirf,pins = "sdmmc2grp";
-                                                sirf,function = "sdmmc2";
-                                        };
-                                };
-				sdmmc2_nowp_pins_a: sdmmc2_nowp@0 {
-                                        sdmmc2_nowp {
-                                                sirf,pins = "sdmmc2_nowpgrp";
-                                                sirf,function = "sdmmc2_nowp";
-                                        };
-                                };
-                                sdmmc3_pins_a: sdmmc3@0 {
-                                        sdmmc3 {
-                                                sirf,pins = "sdmmc3grp";
-                                                sirf,function = "sdmmc3";
-                                        };
-                                };
-                                sdmmc5_pins_a: sdmmc5@0 {
-                                        sdmmc5 {
-                                                sirf,pins = "sdmmc5grp";
-                                                sirf,function = "sdmmc5";
-                                        };
-                                };
-                                i2s_pins_a: i2s@0 {
-                                        i2s {
-                                                sirf,pins = "i2sgrp";
-                                                sirf,function = "i2s";
-                                        };
-                                };
-				i2s_no_din_pins_a: i2s_no_din@0 {
-                                        i2s_no_din {
-                                                sirf,pins = "i2s_no_dingrp";
-                                                sirf,function = "i2s_no_din";
-                                        };
-                                };
-				i2s_6chn_pins_a: i2s_6chn@0 {
-                                        i2s_6chn {
-                                                sirf,pins = "i2s_6chngrp";
-                                                sirf,function = "i2s_6chn";
-                                        };
-                                };
-                                ac97_pins_a: ac97@0 {
-                                        ac97 {
-                                                sirf,pins = "ac97grp";
-                                                sirf,function = "ac97";
-                                        };
-                                };
-                                nand_pins_a: nand@0 {
-                                        nand {
-                                                sirf,pins = "nandgrp";
-                                                sirf,function = "nand";
-                                        };
-                                };
-                                usp0_pins_a: usp0@0 {
-                                        usp0 {
-                                                sirf,pins = "usp0grp";
-                                                sirf,function = "usp0";
-                                        };
-                                };
-				usp0_uart_nostreamctrl_pins_a: usp0@1 {
-                                        usp0 {
-                                                sirf,pins = "usp0_uart_nostreamctrl_grp";
-                                                sirf,function = "usp0_uart_nostreamctrl";
-                                        };
-                                };
-				usp0_only_utfs_pins_a: usp0@2 {
-					usp0 {
-						sirf,pins = "usp0_only_utfs_grp";
-						sirf,function = "usp0_only_utfs";
-					};
-				};
-				usp0_only_urfs_pins_a: usp0@3 {
-					usp0 {
-						sirf,pins = "usp0_only_urfs_grp";
-						sirf,function = "usp0_only_urfs";
-					};
-				};
-                                usp1_pins_a: usp1@0 {
-                                        usp1 {
-                                                sirf,pins = "usp1grp";
-                                                sirf,function = "usp1";
-                                        };
-                                };
-				usp1_uart_nostreamctrl_pins_a: usp1@1 {
-                                        usp1 {
-                                                sirf,pins = "usp1_uart_nostreamctrl_grp";
-                                                sirf,function = "usp1_uart_nostreamctrl";
-                                        };
-                                };
-                                usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 {
-                                        usb0_upli_drvbus {
-                                                sirf,pins = "usb0_upli_drvbusgrp";
-                                                sirf,function = "usb0_upli_drvbus";
-                                        };
-                                };
-                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
-                                        usb1_utmi_drvbus {
-                                                sirf,pins = "usb1_utmi_drvbusgrp";
-                                                sirf,function = "usb1_utmi_drvbus";
-                                        };
-                                };
-                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
-                                        usb1_dp_dn {
-                                                sirf,pins = "usb1_dp_dngrp";
-                                                sirf,function = "usb1_dp_dn";
-                                        };
-                                };
-                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
-                                        uart1_route_io_usb1 {
-                                                sirf,pins = "uart1_route_io_usb1grp";
-                                                sirf,function = "uart1_route_io_usb1";
-                                        };
-                                };
-                                warm_rst_pins_a: warm_rst@0 {
-                                        warm_rst {
-                                                sirf,pins = "warm_rstgrp";
-                                                sirf,function = "warm_rst";
-                                        };
-                                };
-                                pulse_count_pins_a: pulse_count@0 {
-                                        pulse_count {
-                                                sirf,pins = "pulse_countgrp";
-                                                sirf,function = "pulse_count";
-                                        };
-                                };
-                                cko0_pins_a: cko0@0 {
-                                        cko0 {
-                                                sirf,pins = "cko0grp";
-                                                sirf,function = "cko0";
-                                        };
-                                };
-                                cko1_pins_a: cko1@0 {
-                                        cko1 {
-                                                sirf,pins = "cko1grp";
-                                                sirf,function = "cko1";
-                                        };
-                                };
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-				clocks = <&clks 21>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-				clocks = <&clks 22>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-				clocks = <&clks 23>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-					bus-width = <8>;
-					clocks = <&clks 36>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 36>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 37>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 37>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 38>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			minigpsrtc@2000 {
-				compatible = "sirf,prima2-minigpsrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-				clocks = <&clks 40>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-				clocks = <&clks 41>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-				clocks = <&clks 7>;
-			};
-		};
-	};
-};
diff --git a/src/arm/axm5516-amarillo.dts b/src/arm/axm5516-amarillo.dts
deleted file mode 100644
index a9d60471d9ff..000000000000
--- a/src/arm/axm5516-amarillo.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/boot/dts/axm5516-amarillo.dts
- *
- * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/dts-v1/;
-
-/memreserve/ 0x00000000 0x00400000;
-
-#include "axm55xx.dtsi"
-#include "axm5516-cpus.dtsi"
-
-/ {
-	model = "Amarillo AXM5516";
-	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x00000000 0x02 0x00000000>;
-	};
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&serial2 {
-	status = "okay";
-};
-
-&serial3 {
-	status = "okay";
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
diff --git a/src/arm/axm5516-cpus.dtsi b/src/arm/axm5516-cpus.dtsi
deleted file mode 100644
index b85f360cb125..000000000000
--- a/src/arm/axm5516-cpus.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * arch/arm/boot/dts/axm5516-cpus.dtsi
- *
- * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-				core1 {
-					cpu = <&CPU1>;
-				};
-				core2 {
-					cpu = <&CPU2>;
-				};
-				core3 {
-					cpu = <&CPU3>;
-				};
-			};
-			cluster1 {
-				core0 {
-					cpu = <&CPU4>;
-				};
-				core1 {
-					cpu = <&CPU5>;
-				};
-				core2 {
-					cpu = <&CPU6>;
-				};
-				core3 {
-					cpu = <&CPU7>;
-				};
-			};
-			cluster2 {
-				core0 {
-					cpu = <&CPU8>;
-				};
-				core1 {
-					cpu = <&CPU9>;
-				};
-				core2 {
-					cpu = <&CPU10>;
-				};
-				core3 {
-					cpu = <&CPU11>;
-				};
-			};
-			cluster3 {
-				core0 {
-					cpu = <&CPU12>;
-				};
-				core1 {
-					cpu = <&CPU13>;
-				};
-				core2 {
-					cpu = <&CPU14>;
-				};
-				core3 {
-					cpu = <&CPU15>;
-				};
-			};
-		};
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x00>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x01>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x02>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x03>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x100>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x101>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x102>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x103>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU8: cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x200>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU9: cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x201>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU10: cpu@202 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x202>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU11: cpu@203 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x203>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU12: cpu@300 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x300>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU13: cpu@301 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x301>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU14: cpu@302 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x302>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-
-		CPU15: cpu@303 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x303>;
-			clock-frequency= <1400000000>;
-			cpu-release-addr = <0>; // Fixed by the boot loader
-		};
-	};
-};
diff --git a/src/arm/axm55xx.dtsi b/src/arm/axm55xx.dtsi
deleted file mode 100644
index ea288f0a1d39..000000000000
--- a/src/arm/axm55xx.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * arch/arm/boot/dts/axm55xx.dtsi
- *
- * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/lsi,axm5516-clks.h>
-
-#include "skeleton64.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0	  = &serial0;
-		serial1   = &serial1;
-		serial2	  = &serial2;
-		serial3	  = &serial3;
-		timer	  = &timer0;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		clk_ref0: clk_ref0 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		clk_ref1: clk_ref1 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		clk_ref2: clk_ref2 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		clks: clock-controller@2010020000 {
-			compatible = "lsi,axm5516-clks";
-			#clock-cells = <1>;
-			reg = <0x20 0x10020000 0 0x20000>;
-		};
-	};
-
-	gic: interrupt-controller@2001001000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x20 0x01001000 0 0x1000>,
-		      <0x20 0x01002000 0 0x1000>,
-		      <0x20 0x01004000 0 0x2000>,
-		      <0x20 0x01006000 0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-				IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts =
-			<GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		device_type = "soc";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		interrupt-parent = <&gic>;
-		ranges;
-
-		syscon: syscon@2010030000 {
-			compatible = "lsi,axxia-syscon", "syscon";
-			reg = <0x20 0x10030000 0 0x2000>;
-		};
-
-		reset: reset@2010031000 {
-			compatible = "lsi,axm55xx-reset";
-			syscon = <&syscon>;
-		};
-
-		amba {
-			compatible = "arm,amba-bus";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			serial0: uart@2010080000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10080000 0 0x1000>;
-				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			serial1: uart@2010081000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10081000 0 0x1000>;
-				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			serial2: uart@2010082000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10082000 0 0x1000>;
-				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			serial3: uart@2010083000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x20 0x10083000 0 0x1000>;
-				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			timer0: timer@2010091000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x20 0x10091000 0 0x1000>;
-				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "okay";
-			};
-
-			gpio0: gpio@2010092000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0x20 0x10092000 0x00 0x1000>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			gpio1: gpio@2010093000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0x20 0x10093000 0x00 0x1000>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks AXXIA_CLK_PER>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-		};
-	};
-};
-
-/*
-  Local Variables:
-  mode: C
-  End:
-*/
diff --git a/src/arm/bcm11351-brt.dts b/src/arm/bcm11351-brt.dts
deleted file mode 100644
index 396b70459cdc..000000000000
--- a/src/arm/bcm11351-brt.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2012 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include "bcm11351.dtsi"
-
-/ {
-	model = "BCM11351 BRT board";
-	compatible = "brcm,bcm11351-brt", "brcm,bcm11351";
-
-	memory {
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 0>;
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
diff --git a/src/arm/bcm11351.dtsi b/src/arm/bcm11351.dtsi
deleted file mode 100644
index 2ddaa5136611..000000000000
--- a/src/arm/bcm11351.dtsi
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * Copyright (C) 2012-2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "dt-bindings/clock/bcm281xx.h"
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "BCM11351 SoC";
-	compatible = "brcm,bcm11351";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x3500417c>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@3ff00100 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x3ff01000 0x1000>,
-		      <0x3ff00100 0x100>;
-	};
-
-	smc@0x3404c000 {
-		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
-		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
-	};
-
-	uart@3e000000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e000000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e001000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e001000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e003000 {
-		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e003000 0x1000>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	L2: l2-cache {
-		compatible = "brcm,bcm11351-a2-pl310-cache";
-		reg = <0x3ff20000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	watchdog@35002f40 {
-		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
-		reg = <0x35002f40 0x6c>;
-	};
-
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1000>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
-	};
-
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x800>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
-
-	sdio1: sdio@3f180000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f180000 0x10000>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>;
-		status = "disabled";
-	};
-
-	sdio2: sdio@3f190000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f190000 0x10000>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>;
-		status = "disabled";
-	};
-
-	sdio3: sdio@3f1a0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1a0000 0x10000>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
-		status = "disabled";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1b0000 0x10000>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>;
-		status = "disabled";
-	};
-
-	pinctrl@35004800 {
-		compatible = "brcm,bcm11351-pinctrl";
-		reg = <0x35004800 0x430>;
-	};
-
-	i2c@3e016000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3e016000 0x80>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>;
-		status = "disabled";
-	};
-
-	i2c@3e017000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3e017000 0x80>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>;
-		status = "disabled";
-	};
-
-	i2c@3e018000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3e018000 0x80>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>;
-		status = "disabled";
-	};
-
-	i2c@3500d000 {
-		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
-		reg = <0x3500d000 0x80>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>;
-		status = "disabled";
-	};
-
-	pwm: pwm@3e01a000 {
-		compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
-		reg = <0x3e01a000 0xcc>;
-		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		root_ccu: root_ccu {
-			compatible = "brcm,bcm11351-root-ccu";
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		hub_ccu: hub_ccu {
-			compatible = "brcm,bcm11351-hub-ccu";
-			reg = <0x34000000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "tmon_1m";
-		};
-
-		aon_ccu: aon_ccu {
-			compatible = "brcm,bcm11351-aon-ccu";
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer",
-					     "pmu_bsc",
-					     "pmu_bsc_var";
-		};
-
-		master_ccu: master_ccu {
-			compatible = "brcm,bcm11351-master-ccu";
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "usb_ic",
-					     "hsic2_48m",
-					     "hsic2_12m";
-		};
-
-		slave_ccu: slave_ccu {
-			compatible = "brcm,bcm11351-slave-ccu";
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "uartb4",
-					     "ssp0",
-					     "ssp2",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "pwm";
-		};
-
-		ref_1m_clk: ref_1m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <1000000>;
-		};
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_cx40_clk: ref_cx40 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <40000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-			#clock-cells = <0>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		ref_208m_clk: ref_208m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <208000000>;
-		};
-
-		var_208m_clk: var_208m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <208000000>;
-		};
-
-		ref_312m_clk: ref_312m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <312000000>;
-		};
-
-		var_312m_clk: var_312m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <312000000>;
-		};
-	};
-
-	usbotg: usb@3f120000 {
-		compatible = "snps,dwc2";
-		reg = <0x3f120000 0x10000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/bcm21664-garnet.dts b/src/arm/bcm21664-garnet.dts
deleted file mode 100644
index e87cb26ddf84..000000000000
--- a/src/arm/bcm21664-garnet.dts
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm21664.dtsi"
-
-/ {
-	model = "BCM21664 Garnet board";
-	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
-
-	memory {
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
diff --git a/src/arm/bcm21664.dtsi b/src/arm/bcm21664.dtsi
deleted file mode 100644
index 2016b72a8fb7..000000000000
--- a/src/arm/bcm21664.dtsi
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "dt-bindings/clock/bcm21664.h"
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "BCM21664 SoC";
-	compatible = "brcm,bcm21664";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-       cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x35004178>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@3ff00100 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x3ff01000 0x1000>,
-		      <0x3ff00100 0x100>;
-	};
-
-	smc@0x3404e000 {
-		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
-		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
-	};
-
-	uart@3e000000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e000000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e001000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e001000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	L2: l2-cache {
-		compatible = "arm,pl310-cache";
-		reg = <0x3ff20000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	brcm,resetmgr@35001f00 {
-		compatible = "brcm,bcm21664-resetmgr";
-		reg = <0x35001f00 0x24>;
-	};
-
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1c>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-	};
-
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x524>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
-
-	sdio1: sdio@3f180000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f180000 0x801c>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-		status = "disabled";
-	};
-
-	sdio2: sdio@3f190000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f190000 0x801c>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-		status = "disabled";
-	};
-
-	sdio3: sdio@3f1a0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1a0000 0x801c>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-		status = "disabled";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1b0000 0x801c>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-		status = "disabled";
-	};
-
-	i2c@3e016000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e016000 0x70>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-		status = "disabled";
-	};
-
-	i2c@3e017000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e017000 0x70>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-		status = "disabled";
-	};
-
-	i2c@3e018000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e018000 0x70>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-		status = "disabled";
-	};
-
-	i2c@3e01c000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e01c000 0x70>;
-		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		master_ccu: master_ccu {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-
-		slave_ccu: slave_ccu {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-	};
-
-	usbotg: usb@3f120000 {
-		compatible = "snps,dwc2";
-		reg = <0x3f120000 0x10000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/bcm28155-ap.dts b/src/arm/bcm28155-ap.dts
deleted file mode 100644
index 9ce91dd60cb6..000000000000
--- a/src/arm/bcm28155-ap.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm11351.dtsi"
-
-/ {
-	model = "BCM28155 AP board";
-	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
-
-	memory {
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	i2c@3e016000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e017000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e018000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3500d000 {
-		status="okay";
-		clock-frequency = <100000>;
-
-		pmu: pmu@8 {
-			reg = <0x08>;
-		};
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		vmmc-supply = <&camldo1_reg>;
-		vqmmc-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		vmmc-supply = <&sdldo_reg>;
-		vqmmc-supply = <&sdxldo_reg>;
-		status = "okay";
-	};
-
-	pwm: pwm@3e01a000 {
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		vusb_d-supply = <&usbldo_reg>;
-		vusb_a-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
-
-#include "bcm59056.dtsi"
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-	regulators {
-		camldo1_reg: camldo1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdldo_reg: sdldo {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		sdxldo_reg: sdxldo {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		usbldo_reg: usbldo {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		iosr1_reg: iosr1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/bcm2835-rpi-b.dts b/src/arm/bcm2835-rpi-b.dts
deleted file mode 100644
index 2a3b1c1313a0..000000000000
--- a/src/arm/bcm2835-rpi-b.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/dts-v1/;
-/include/ "bcm2835.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-b", "brcm,bcm2835";
-	model = "Raspberry Pi Model B";
-
-	memory {
-		reg = <0 0x10000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		act {
-			label = "ACT";
-			gpios = <&gpio 16 1>;
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpioout &alt0 &alt3>;
-
-	gpioout: gpioout {
-		brcm,pins = <6>;
-		brcm,function = <1>; /* GPIO out */
-	};
-
-	alt0: alt0 {
-		brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
-		brcm,function = <4>; /* alt0 */
-	};
-
-	alt3: alt3 {
-		brcm,pins = <48 49 50 51 52 53>;
-		brcm,function = <7>; /* alt3 */
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&sdhci {
-	status = "okay";
-	bus-width = <4>;
-};
diff --git a/src/arm/bcm2835.dtsi b/src/arm/bcm2835.dtsi
deleted file mode 100644
index b8473c43e888..000000000000
--- a/src/arm/bcm2835.dtsi
+++ /dev/null
@@ -1,182 +0,0 @@
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "brcm,bcm2835";
-	model = "BCM2835";
-	interrupt-parent = <&intc>;
-
-	chosen {
-		bootargs = "earlyprintk console=ttyAMA0";
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x7e000000 0x20000000 0x02000000>;
-
-		timer@7e003000 {
-			compatible = "brcm,bcm2835-system-timer";
-			reg = <0x7e003000 0x1000>;
-			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-			clock-frequency = <1000000>;
-		};
-
-		dma: dma@7e007000 {
-			compatible = "brcm,bcm2835-dma";
-			reg = <0x7e007000 0xf00>;
-			interrupts = <1 16>,
-				     <1 17>,
-				     <1 18>,
-				     <1 19>,
-				     <1 20>,
-				     <1 21>,
-				     <1 22>,
-				     <1 23>,
-				     <1 24>,
-				     <1 25>,
-				     <1 26>,
-				     <1 27>,
-				     <1 28>;
-
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x7f35>;
-		};
-
-		intc: interrupt-controller@7e00b200 {
-			compatible = "brcm,bcm2835-armctrl-ic";
-			reg = <0x7e00b200 0x200>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm-wdt";
-			reg = <0x7e100000 0x28>;
-		};
-
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-		};
-
-		gpio: gpio@7e200000 {
-			compatible = "brcm,bcm2835-gpio";
-			reg = <0x7e200000 0xb4>;
-			/*
-			 * The GPIO IP block is designed for 3 banks of GPIOs.
-			 * Each bank has a GPIO interrupt for itself.
-			 * There is an overall "any bank" interrupt.
-			 * In order, these are GIC interrupts 17, 18, 19, 20.
-			 * Since the BCM2835 only has 2 banks, the 2nd bank
-			 * interrupt output appears to be mirrored onto the
-			 * 3rd bank's interrupt signal.
-			 * So, a bank0 interrupt shows up on 17, 20, and
-			 * a bank1 interrupt shows up on 18, 19, 20!
-			 */
-			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart@7e201000 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
-			interrupts = <2 25>;
-			clock-frequency = <3000000>;
-			arm,primecell-periphid = <0x00241011>;
-		};
-
-		i2s: i2s@7e203000 {
-			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x20>,
-			      <0x7e101098 0x02>;
-
-			dmas = <&dma 2>,
-			       <&dma 3>;
-			dma-names = "tx", "rx";
-		};
-
-		spi: spi@7e204000 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204000 0x1000>;
-			interrupts = <2 22>;
-			clocks = <&clk_spi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@20205000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sdhci: sdhci@7e300000 {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clk_mmc>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@7e804000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e804000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usb@7e980000 {
-			compatible = "brcm,bcm2835-usb";
-			reg = <0x7e980000 0x10000>;
-			interrupts = <1 9>;
-		};
-
-		arm-pmu {
-			compatible = "arm,arm1176-pmu";
-		};
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk_mmc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc";
-			clock-frequency = <100000000>;
-		};
-
-		clk_i2c: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-output-names = "i2c";
-			clock-frequency = <250000000>;
-		};
-
-		clk_spi: clock@2 {
-			compatible = "fixed-clock";
-			reg = <2>;
-			#clock-cells = <0>;
-			clock-output-names = "spi";
-			clock-frequency = <250000000>;
-		};
-	};
-};
diff --git a/src/arm/bcm4708-netgear-r6250.dts b/src/arm/bcm4708-netgear-r6250.dts
deleted file mode 100644
index 3b5259de5a38..000000000000
--- a/src/arm/bcm4708-netgear-r6250.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X arm platform code.
- * DTS for Netgear R6250 V1
- *
- * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-
-/ {
-	compatible = "netgear,r6250v1", "brcm,bcm4708";
-	model = "Netgear R6250 V1 (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	chipcommonA {
-		uart0: serial@0300 {
-			status = "okay";
-		};
-
-		uart1: serial@0400 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/bcm4708.dtsi b/src/arm/bcm4708.dtsi
deleted file mode 100644
index 31141e83fedd..000000000000
--- a/src/arm/bcm4708.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for BCM4708 SoC.
- *
- * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include "bcm5301x.dtsi"
-
-/ {
-	compatible = "brcm,bcm4708";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x1>;
-		};
-	};
-
-};
diff --git a/src/arm/bcm5301x.dtsi b/src/arm/bcm5301x.dtsi
deleted file mode 100644
index 53c624f766b4..000000000000
--- a/src/arm/bcm5301x.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
- * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
- *
- * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	chipcommonA {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x00001000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: serial@0300 {
-			compatible = "ns16550";
-			reg = <0x0300 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-
-		uart1: serial@0400 {
-			compatible = "ns16550";
-			reg = <0x0400 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000000>;
-			status = "disabled";
-		};
-	};
-
-	mpcore {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19020000 0x00003000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		scu@0000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x0000 0x100>;
-		};
-
-		timer@0200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x0200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_periph>;
-		};
-
-		local-timer@0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x0600 0x100>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_periph>;
-		};
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>,
-			      <0x0100 0x100>;
-		};
-
-		L2: cache-controller@2000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x2000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* As long as we do not have a real clock driver us this
-		 * fixed clock */
-		clk_periph: periph {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <400000000>;
-		};
-	};
-};
diff --git a/src/arm/bcm59056.dtsi b/src/arm/bcm59056.dtsi
deleted file mode 100644
index 066adfb10bd5..000000000000
--- a/src/arm/bcm59056.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
-* Copyright 2014 Linaro Limited
-* Author: Matt Porter <mporter@linaro.org>
-*
-* This program is free software; you can redistribute it and/or modify it
-* under  the terms of the GNU General  Public License as published by the
-* Free Software Foundation;  either version 2 of the License, or (at your
-* option) any later version.
-*/
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	regulators {
-		rfldo_reg: rfldo {
-		};
-
-		camldo1_reg: camldo1 {
-		};
-
-		camldo2_reg: camldo2 {
-		};
-
-		simldo1_reg: simldo1 {
-		};
-
-		simldo2_reg: simldo2 {
-		};
-
-		sdldo_reg: sdldo {
-		};
-
-		sdxldo_reg: sdxldo {
-		};
-
-		mmcldo1_reg: mmcldo1 {
-		};
-
-		mmcldo2_reg: mmcldo2 {
-		};
-
-		audldo_reg: audldo {
-		};
-
-		micldo_reg: micldo {
-		};
-
-		usbldo_reg: usbldo {
-		};
-
-		vibldo_reg: vibldo {
-		};
-
-		csr_reg: csr {
-		};
-
-		iosr1_reg: iosr1 {
-		};
-
-		iosr2_reg: iosr2 {
-		};
-
-		msr_reg: msr {
-		};
-
-		sdsr1_reg: sdsr1 {
-		};
-
-		sdsr2_reg: sdsr2 {
-		};
-
-		vsr_reg: vsr {
-		};
-
-		gpldo1_reg: gpldo1 {
-		};
-
-		gpldo2_reg: gpldo2 {
-		};
-
-		gpldo3_reg: gpldo3 {
-		};
-
-		gpldo4_reg: gpldo4 {
-		};
-
-		gpldo5_reg: gpldo5 {
-		};
-
-		gpldo6_reg: gpldo6 {
-		};
-
-		vbus_reg: vbus {
-		};
-	};
-};
diff --git a/src/arm/bcm7445-bcm97445svmb.dts b/src/arm/bcm7445-bcm97445svmb.dts
deleted file mode 100644
index 9eec2ac1112f..000000000000
--- a/src/arm/bcm7445-bcm97445svmb.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-/dts-v1/;
-#include "bcm7445.dtsi"
-
-/ {
-	model = "Broadcom STB (bcm7445), SVMB reference board";
-	compatible = "brcm,bcm7445", "brcm,brcmstb";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00 0x00000000 0x00 0x40000000>,
-		      <0x00 0x40000000 0x00 0x40000000>,
-		      <0x00 0x80000000 0x00 0x40000000>;
-	};
-};
diff --git a/src/arm/bcm7445.dtsi b/src/arm/bcm7445.dtsi
deleted file mode 100644
index 0ca0f4e523d0..000000000000
--- a/src/arm/bcm7445.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	model = "Broadcom STB (bcm7445)";
-	compatible = "brcm,bcm7445", "brcm,brcmstb";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "brcm,brahma-b15";
-			device_type = "cpu";
-			enable-method = "brcm,brahma-b15";
-			reg = <3>;
-		};
-	};
-
-	gic: interrupt-controller@ffd00000 {
-		compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
-		reg = <0x00 0xffd01000 0x00 0x1000>,
-		      <0x00 0xffd02000 0x00 0x2000>,
-		      <0x00 0xffd04000 0x00 0x2000>,
-		      <0x00 0xffd06000 0x00 0x2000>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	rdb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0x00 0xf0000000 0x1000000>;
-
-		serial@40ab00 {
-			compatible = "ns16550a";
-			reg = <0x40ab00 0x20>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0x4d3f640>;
-		};
-
-		sun_top_ctrl: syscon@404000 {
-			compatible = "brcm,bcm7445-sun-top-ctrl",
-				     "syscon";
-			reg = <0x404000 0x51c>;
-		};
-
-		hif_cpubiuctrl: syscon@3e2400 {
-			compatible = "brcm,bcm7445-hif-cpubiuctrl",
-				     "syscon";
-			reg = <0x3e2400 0x5b4>;
-		};
-
-		hif_continuation: syscon@452000 {
-			compatible = "brcm,bcm7445-hif-continuation",
-				     "syscon";
-			reg = <0x452000 0x100>;
-		};
-	};
-
-	smpboot {
-		compatible = "brcm,brcmstb-smpboot";
-		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
-		syscon-cont = <&hif_continuation>;
-	};
-
-	reboot {
-		compatible = "brcm,brcmstb-reboot";
-		syscon = <&sun_top_ctrl 0x304 0x308>;
-	};
-};
diff --git a/src/arm/berlin2-sony-nsz-gs7.dts b/src/arm/berlin2-sony-nsz-gs7.dts
deleted file mode 100644
index c72bfd468d10..000000000000
--- a/src/arm/berlin2-sony-nsz-gs7.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Device Tree file for Sony NSZ-GS7
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "berlin2.dtsi"
-
-/ {
-	model = "Sony NSZ-GS7";
-	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-};
-
-&uart0 { status = "okay"; };
diff --git a/src/arm/berlin2.dtsi b/src/arm/berlin2.dtsi
deleted file mode 100644
index 9d7c810ebd0b..000000000000
--- a/src/arm/berlin2.dtsi
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 1500 (Berlin BG2) SoC
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * based on GPL'ed 2.6 kernel sources
- *  (c) Marvell International Ltd.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/berlin2.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "Marvell Armada 1500 (BG2) SoC";
-	compatible = "marvell,berlin2", "marvell,berlin";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,berlin-smp";
-
-		cpu@0 {
-			compatible = "marvell,pj4b";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "marvell,pj4b";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <1>;
-		};
-	};
-
-	refclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&gic>;
-
-		ranges = <0 0xf7000000 0x1000000>;
-
-		l2: l2-cache-controller@ac0000 {
-			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
-			reg = <0xac0000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		scu: snoop-control-unit@ad0000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0xad0000 0x58>;
-		};
-
-		gic: interrupt-controller@ad1000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		local-timer@ad0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_TWD>;
-		};
-
-		cpu-ctrl@dd0000 {
-			compatible = "marvell,berlin-cpu-ctrl";
-			reg = <0xdd0000 0x10000>;
-		};
-
-		apb@e80000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe80000 0x10000>;
-			interrupt-parent = <&aic>;
-
-			gpio0: gpio@0400 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porta: gpio-port@0 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <0>;
-				};
-			};
-
-			gpio1: gpio@0800 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0800 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portb: gpio-port@1 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <1>;
-				};
-			};
-
-			gpio2: gpio@0c00 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0c00 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portc: gpio-port@2 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <2>;
-				};
-			};
-
-			gpio3: gpio@1000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x1000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portd: gpio-port@3 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <3>;
-				};
-			};
-
-			timer0: timer@2c00 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c00 0x14>;
-				interrupts = <8>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer1: timer@2c14 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c14 0x14>;
-				interrupts = <9>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer2: timer@2c28 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c28 0x14>;
-				interrupts = <10>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer3: timer@2c3c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c3c 0x14>;
-				interrupts = <11>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer4: timer@2c50 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c50 0x14>;
-				interrupts = <12>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer5: timer@2c64 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c64 0x14>;
-				interrupts = <13>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer6: timer@2c78 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c78 0x14>;
-				interrupts = <14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer7: timer@2c8c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c8c 0x14>;
-				interrupts = <15>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			aic: interrupt-controller@3000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x3000 0xc00>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2-chip-ctrl";
-			#clock-cells = <1>;
-			reg = <0xea0000 0x400>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
-		};
-
-		apb@fc0000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xfc0000 0x10000>;
-			interrupt-parent = <&sic>;
-
-			sm_gpio1: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-				};
-			};
-
-			sm_gpio0: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <11>;
-				};
-			};
-
-			uart0: serial@9000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x9000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <8>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart1: serial@a000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xa000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <9>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart1_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart2: serial@b000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xb000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <10>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart2_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sysctrl: system-controller@d000 {
-				compatible = "marvell,berlin2-system-ctrl";
-				reg = <0xd000 0x100>;
-
-				uart0_pmux: uart0-pmux {
-					groups = "GSM4";
-					function = "uart0";
-				};
-
-				uart1_pmux: uart1-pmux {
-					groups = "GSM5";
-					function = "uart1";
-				};
-
-				uart2_pmux: uart2-pmux {
-					groups = "GSM3";
-					function = "uart2";
-				};
-			};
-
-			sic: interrupt-controller@e000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0xe000 0x400>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
diff --git a/src/arm/berlin2cd-google-chromecast.dts b/src/arm/berlin2cd-google-chromecast.dts
deleted file mode 100644
index bcd81ffc495d..000000000000
--- a/src/arm/berlin2cd-google-chromecast.dts
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Device Tree file for Google Chromecast
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "berlin2cd.dtsi"
-
-/ {
-	model = "Google Chromecast";
-	compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-};
-
-&uart0 { status = "okay"; };
diff --git a/src/arm/berlin2cd.dtsi b/src/arm/berlin2cd.dtsi
deleted file mode 100644
index cc1df65da504..000000000000
--- a/src/arm/berlin2cd.dtsi
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Device Tree Include file for Marvell Armada 1500-mini (Berlin BG2CD) SoC
- *
- * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * based on GPL'ed 2.6 kernel sources
- *  (c) Marvell International Ltd.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/berlin2.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "Marvell Armada 1500-mini (BG2CD) SoC";
-	compatible = "marvell,berlin2cd", "marvell,berlin";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-	};
-
-	refclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&gic>;
-
-		ranges = <0 0xf7000000 0x1000000>;
-
-		l2: l2-cache-controller@ac0000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xac0000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		gic: interrupt-controller@ad1000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		local-timer@ad0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_TWD>;
-		};
-
-		apb@e80000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe80000 0x10000>;
-			interrupt-parent = <&aic>;
-
-			gpio0: gpio@0400 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porta: gpio-port@0 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <0>;
-				};
-			};
-
-			gpio1: gpio@0800 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0800 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portb: gpio-port@1 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <1>;
-				};
-			};
-
-			gpio2: gpio@0c00 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0c00 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portc: gpio-port@2 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <2>;
-				};
-			};
-
-			gpio3: gpio@1000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x1000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portd: gpio-port@3 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <3>;
-				};
-			};
-
-			timer0: timer@2c00 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c00 0x14>;
-				interrupts = <8>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer1: timer@2c14 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c14 0x14>;
-				interrupts = <9>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "okay";
-			};
-
-			timer2: timer@2c28 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c28 0x14>;
-				interrupts = <10>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer3: timer@2c3c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c3c 0x14>;
-				interrupts = <11>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer4: timer@2c50 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c50 0x14>;
-				interrupts = <12>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer5: timer@2c64 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c64 0x14>;
-				interrupts = <13>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer6: timer@2c78 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c78 0x14>;
-				interrupts = <14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer7: timer@2c8c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c8c 0x14>;
-				interrupts = <15>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			aic: interrupt-controller@3000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x3000 0xc00>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2cd-chip-ctrl";
-			#clock-cells = <1>;
-			reg = <0xea0000 0x400>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
-
-			uart0_pmux: uart0-pmux {
-				groups = "G6";
-				function = "uart0";
-			};
-		};
-
-		apb@fc0000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xfc0000 0x10000>;
-			interrupt-parent = <&sic>;
-
-			sm_gpio1: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-				};
-			};
-
-			sm_gpio0: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
-					reg = <0>;
-				};
-			};
-
-			uart0: serial@9000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x9000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <8>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&uart0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart1: serial@a000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xa000 0x100>;
-				reg-shift = <2>;
-				reg-io-width = <1>;
-				interrupts = <9>;
-				clocks = <&refclk>;
-				status = "disabled";
-			};
-
-			sysctrl: system-controller@d000 {
-				compatible = "marvell,berlin2cd-system-ctrl";
-				reg = <0xd000 0x100>;
-			};
-
-			sic: interrupt-controller@e000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0xe000 0x400>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
diff --git a/src/arm/berlin2q-marvell-dmp.dts b/src/arm/berlin2q-marvell-dmp.dts
deleted file mode 100644
index a357ce02a64e..000000000000
--- a/src/arm/berlin2q-marvell-dmp.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "berlin2q.dtsi"
-
-/ {
-	model = "Marvell BG2-Q DMP";
-	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>;
-	};
-
-	choosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
-	};
-};
-
-&sdhci1 {
-	broken-cd;
-	sdhci,wp-inverted;
-	status = "okay";
-};
-
-&sdhci2 {
-	non-removable;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/berlin2q.dtsi b/src/arm/berlin2q.dtsi
deleted file mode 100644
index 400c40fceccc..000000000000
--- a/src/arm/berlin2q.dtsi
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <dt-bindings/clock/berlin2q.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
-	compatible = "marvell,berlin2q", "marvell,berlin";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,berlin-smp";
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <3>;
-		};
-	};
-
-	refclk: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0 0xf7000000 0x1000000>;
-		interrupt-parent = <&gic>;
-
-		sdhci0: sdhci@ab0000 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab0000 0x200>;
-			clocks = <&chip CLKID_SDIO1XIN>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		sdhci1: sdhci@ab0800 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab0800 0x200>;
-			clocks = <&chip CLKID_SDIO1XIN>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		sdhci2: sdhci@ab1000 {
-			compatible = "mrvl,pxav3-mmc";
-			reg = <0xab1000 0x200>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip CLKID_SDIO1XIN>;
-			status = "disabled";
-		};
-
-		l2: l2-cache-controller@ac0000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xac0000 0x1000>;
-			cache-level = <2>;
-			arm,data-latency = <2 2 2>;
-			arm,tag-latency = <2 2 2>;
-		};
-
-		scu: snoop-control-unit@ad0000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0xad0000 0x58>;
-		};
-
-		local-timer@ad0600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xad0600 0x20>;
-			clocks = <&chip CLKID_TWD>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		gic: interrupt-controller@ad1000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0xad1000 0x1000>, <0xad0100 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-		};
-
-		cpu-ctrl@dd0000 {
-			compatible = "marvell,berlin-cpu-ctrl";
-			reg = <0xdd0000 0x10000>;
-		};
-
-		apb@e80000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xe80000 0x10000>;
-			interrupt-parent = <&aic>;
-
-			gpio0: gpio@0400 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0400 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porta: gpio-port@0 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <0>;
-				};
-			};
-
-			gpio1: gpio@0800 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0800 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portb: gpio-port@1 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <1>;
-				};
-			};
-
-			gpio2: gpio@0c00 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x0c00 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portc: gpio-port@2 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <2>;
-				};
-			};
-
-			gpio3: gpio@1000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x1000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portd: gpio-port@3 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					interrupts = <3>;
-				};
-			};
-
-			i2c0: i2c@1400 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1400 0x100>;
-				interrupt-parent = <&aic>;
-				interrupts = <4>;
-				clocks = <&chip CLKID_CFG>;
-				pinctrl-0 = <&twsi0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			i2c1: i2c@1800 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1800 0x100>;
-				interrupt-parent = <&aic>;
-				interrupts = <5>;
-				clocks = <&chip CLKID_CFG>;
-				pinctrl-0 = <&twsi1_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			timer0: timer@2c00 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c00 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				interrupts = <8>;
-			};
-
-			timer1: timer@2c14 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c14 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer2: timer@2c28 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c28 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer3: timer@2c3c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c3c 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer4: timer@2c50 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c50 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer5: timer@2c64 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c64 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer6: timer@2c78 {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c78 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			timer7: timer@2c8c {
-				compatible = "snps,dw-apb-timer";
-				reg = <0x2c8c 0x14>;
-				clocks = <&chip CLKID_CFG>;
-				clock-names = "timer";
-				status = "disabled";
-			};
-
-			aic: interrupt-controller@3800 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0x3800 0x30>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			gpio4: gpio@5000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x5000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				porte: gpio-port@4 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-				};
-			};
-
-			gpio5: gpio@c000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0xc000 0x400>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				portf: gpio-port@5 {
-					compatible = "snps,dw-apb-gpio-port";
-					gpio-controller;
-					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
-					reg = <0>;
-				};
-			};
-		};
-
-		chip: chip-control@ea0000 {
-			compatible = "marvell,berlin2q-chip-ctrl";
-			#clock-cells = <1>;
-			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
-			clocks = <&refclk>;
-			clock-names = "refclk";
-
-			twsi0_pmux: twsi0-pmux {
-				groups = "G6";
-				function = "twsi0";
-			};
-
-			twsi1_pmux: twsi1-pmux {
-				groups = "G7";
-				function = "twsi1";
-			};
-		};
-
-		apb@fc0000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0xfc0000 0x10000>;
-			interrupt-parent = <&sic>;
-
-			i2c2: i2c@7000 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x7000 0x100>;
-				interrupt-parent = <&sic>;
-				interrupts = <6>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&twsi2_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			i2c3: i2c@8000 {
-				compatible = "snps,designware-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x8000 0x100>;
-				interrupt-parent = <&sic>;
-				interrupts = <7>;
-				clocks = <&refclk>;
-				pinctrl-0 = <&twsi3_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart0: uart@9000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x9000 0x100>;
-				interrupt-parent = <&sic>;
-				interrupts = <8>;
-				clocks = <&refclk>;
-				reg-shift = <2>;
-				pinctrl-0 = <&uart0_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart1: uart@a000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0xa000 0x100>;
-				interrupt-parent = <&sic>;
-				interrupts = <9>;
-				clocks = <&refclk>;
-				reg-shift = <2>;
-				pinctrl-0 = <&uart1_pmux>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sysctrl: pin-controller@d000 {
-				compatible = "marvell,berlin2q-system-ctrl";
-				reg = <0xd000 0x100>;
-
-				uart0_pmux: uart0-pmux {
-					groups = "GSM12";
-					function = "uart0";
-				};
-
-				uart1_pmux: uart1-pmux {
-					groups = "GSM14";
-					function = "uart1";
-				};
-
-				twsi2_pmux: twsi2-pmux {
-					groups = "GSM13";
-					function = "twsi2";
-				};
-
-				twsi3_pmux: twsi3-pmux {
-					groups = "GSM14";
-					function = "twsi3";
-				};
-			};
-
-			sic: interrupt-controller@e000 {
-				compatible = "snps,dw-apb-ictl";
-				reg = <0xe000 0x30>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};
diff --git a/src/arm/cros-ec-keyboard.dtsi b/src/arm/cros-ec-keyboard.dtsi
deleted file mode 100644
index 9c7fb0acae79..000000000000
--- a/src/arm/cros-ec-keyboard.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Keyboard dts fragment for devices that use cros-ec-keyboard
- *
- * Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/input/input.h>
-
-&cros_ec {
-	keyboard-controller {
-		compatible = "google,cros-ec-keyb";
-		keypad,num-rows = <8>;
-		keypad,num-columns = <13>;
-		google,needs-ghost-filter;
-
-		linux,keymap = <
-			MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
-			MATRIX_KEY(0x00, 0x02, KEY_F1)
-			MATRIX_KEY(0x00, 0x03, KEY_B)
-			MATRIX_KEY(0x00, 0x04, KEY_F10)
-			MATRIX_KEY(0x00, 0x06, KEY_N)
-			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
-			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
-
-			MATRIX_KEY(0x01, 0x01, KEY_ESC)
-			MATRIX_KEY(0x01, 0x02, KEY_F4)
-			MATRIX_KEY(0x01, 0x03, KEY_G)
-			MATRIX_KEY(0x01, 0x04, KEY_F7)
-			MATRIX_KEY(0x01, 0x06, KEY_H)
-			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
-			MATRIX_KEY(0x01, 0x09, KEY_F9)
-			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
-
-			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
-			MATRIX_KEY(0x02, 0x01, KEY_TAB)
-			MATRIX_KEY(0x02, 0x02, KEY_F3)
-			MATRIX_KEY(0x02, 0x03, KEY_T)
-			MATRIX_KEY(0x02, 0x04, KEY_F6)
-			MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
-			MATRIX_KEY(0x02, 0x06, KEY_Y)
-			MATRIX_KEY(0x02, 0x07, KEY_102ND)
-			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
-			MATRIX_KEY(0x02, 0x09, KEY_F8)
-
-			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
-			MATRIX_KEY(0x03, 0x02, KEY_F2)
-			MATRIX_KEY(0x03, 0x03, KEY_5)
-			MATRIX_KEY(0x03, 0x04, KEY_F5)
-			MATRIX_KEY(0x03, 0x06, KEY_6)
-			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
-			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
-
-			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
-			MATRIX_KEY(0x04, 0x01, KEY_A)
-			MATRIX_KEY(0x04, 0x02, KEY_D)
-			MATRIX_KEY(0x04, 0x03, KEY_F)
-			MATRIX_KEY(0x04, 0x04, KEY_S)
-			MATRIX_KEY(0x04, 0x05, KEY_K)
-			MATRIX_KEY(0x04, 0x06, KEY_J)
-			MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
-			MATRIX_KEY(0x04, 0x09, KEY_L)
-			MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
-			MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
-
-			MATRIX_KEY(0x05, 0x01, KEY_Z)
-			MATRIX_KEY(0x05, 0x02, KEY_C)
-			MATRIX_KEY(0x05, 0x03, KEY_V)
-			MATRIX_KEY(0x05, 0x04, KEY_X)
-			MATRIX_KEY(0x05, 0x05, KEY_COMMA)
-			MATRIX_KEY(0x05, 0x06, KEY_M)
-			MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
-			MATRIX_KEY(0x05, 0x08, KEY_SLASH)
-			MATRIX_KEY(0x05, 0x09, KEY_DOT)
-			MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
-
-			MATRIX_KEY(0x06, 0x01, KEY_1)
-			MATRIX_KEY(0x06, 0x02, KEY_3)
-			MATRIX_KEY(0x06, 0x03, KEY_4)
-			MATRIX_KEY(0x06, 0x04, KEY_2)
-			MATRIX_KEY(0x06, 0x05, KEY_8)
-			MATRIX_KEY(0x06, 0x06, KEY_7)
-			MATRIX_KEY(0x06, 0x08, KEY_0)
-			MATRIX_KEY(0x06, 0x09, KEY_9)
-			MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
-			MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
-			MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
-
-			MATRIX_KEY(0x07, 0x01, KEY_Q)
-			MATRIX_KEY(0x07, 0x02, KEY_E)
-			MATRIX_KEY(0x07, 0x03, KEY_R)
-			MATRIX_KEY(0x07, 0x04, KEY_W)
-			MATRIX_KEY(0x07, 0x05, KEY_I)
-			MATRIX_KEY(0x07, 0x06, KEY_U)
-			MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
-			MATRIX_KEY(0x07, 0x08, KEY_P)
-			MATRIX_KEY(0x07, 0x09, KEY_O)
-			MATRIX_KEY(0x07, 0x0b, KEY_UP)
-			MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
-		>;
-	};
-};
diff --git a/src/arm/da850-enbw-cmc.dts b/src/arm/da850-enbw-cmc.dts
deleted file mode 100644
index e750ab9086d5..000000000000
--- a/src/arm/da850-enbw-cmc.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Device Tree for AM1808 EnBW CMC board
- *
- * Copyright 2012 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-/dts-v1/;
-#include "da850.dtsi"
-
-/ {
-	compatible = "enbw,cmc", "ti,da850";
-	model = "EnBW CMC";
-
-	soc {
-		serial0: serial@1c42000 {
-			status = "okay";
-		};
-		serial1: serial@1d0c000 {
-			status = "okay";
-		};
-		serial2: serial@1d0d000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/da850-evm.dts b/src/arm/da850-evm.dts
deleted file mode 100644
index 1e11e5a5f723..000000000000
--- a/src/arm/da850-evm.dts
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Device Tree for DA850 EVM board
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation, version 2.
- */
-/dts-v1/;
-#include "da850.dtsi"
-
-/ {
-	compatible = "ti,da850-evm", "ti,da850";
-	model = "DA850/AM1808/OMAP-L138 EVM";
-
-	soc {
-		pmx_core: pinmux@1c14120 {
-			status = "okay";
-		};
-		serial0: serial@1c42000 {
-			status = "okay";
-		};
-		serial1: serial@1d0c000 {
-			status = "okay";
-		};
-		serial2: serial@1d0d000 {
-			status = "okay";
-		};
-		rtc0: rtc@1c23000 {
-			status = "okay";
-		};
-		i2c0: i2c@1c22000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			tps: tps@48 {
-				reg = <0x48>;
-			};
-		};
-		wdt: wdt@1c21000 {
-			status = "okay";
-		};
-		mmc0: mmc@1c40000 {
-			max-frequency = <50000000>;
-			bus-width = <4>;
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins>;
-		};
-		spi1: spi@1f0e000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
-			flash: m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p64";
-				spi-max-frequency = <30000000>;
-				reg = <0>;
-				partition@0 {
-					label = "U-Boot-SPL";
-					reg = <0x00000000 0x00010000>;
-					read-only;
-				};
-				partition@1 {
-					label = "U-Boot";
-					reg = <0x00010000 0x00080000>;
-					read-only;
-				};
-				partition@2 {
-					label = "U-Boot-Env";
-					reg = <0x00090000 0x00010000>;
-					read-only;
-				};
-				partition@3 {
-					label = "Kernel";
-					reg = <0x000a0000 0x00280000>;
-				};
-				partition@4 {
-					label = "Filesystem";
-					reg = <0x00320000 0x00400000>;
-				};
-				partition@5 {
-					label = "MAC-Address";
-					reg = <0x007f0000 0x00010000>;
-					read-only;
-				};
-			};
-		};
-		mdio: mdio@1e24000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mdio_pins>;
-			bus_freq = <2200000>;
-		};
-		eth0: ethernet@1e20000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mii_pins>;
-		};
-		gpio: gpio@1e26000 {
-			status = "okay";
-		};
-	};
-	nand_cs3@62000000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_cs3_pins>;
-	};
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-};
-
-/include/ "tps6507x.dtsi"
-
-&tps {
-	vdcdc1_2-supply = <&vbat>;
-	vdcdc3-supply = <&vbat>;
-	vldo1_2-supply = <&vbat>;
-
-	regulators {
-		vdcdc1_reg: regulator@0 {
-			regulator-name = "VDCDC1_3.3V";
-			regulator-min-microvolt = <3150000>;
-			regulator-max-microvolt = <3450000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdcdc2_reg: regulator@1 {
-			regulator-name = "VDCDC2_3.3V";
-			regulator-min-microvolt = <1710000>;
-			regulator-max-microvolt = <3450000>;
-			regulator-always-on;
-			regulator-boot-on;
-			ti,defdcdc_default = <1>;
-		};
-
-		vdcdc3_reg: regulator@2 {
-			regulator-name = "VDCDC3_1.2V";
-			regulator-min-microvolt = <950000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-always-on;
-			regulator-boot-on;
-			ti,defdcdc_default = <1>;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "LDO1_1.8V";
-			regulator-min-microvolt = <1710000>;
-			regulator-max-microvolt = <1890000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "LDO2_1.2V";
-			regulator-min-microvolt = <1140000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
diff --git a/src/arm/da850.dtsi b/src/arm/da850.dtsi
deleted file mode 100644
index b695548dbb4e..000000000000
--- a/src/arm/da850.dtsi
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Copyright 2012 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	arm {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		intc: interrupt-controller {
-			compatible = "ti,cp-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <100>;
-			reg = <0xfffee000 0x2000>;
-		};
-	};
-	soc {
-		compatible = "simple-bus";
-		model = "da850";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x01c00000 0x400000>;
-		interrupt-parent = <&intc>;
-
-		pmx_core: pinmux@1c14120 {
-			compatible = "pinctrl-single";
-			reg = <0x14120 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,bit-per-mux;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0xf>;
-			status = "disabled";
-
-			nand_cs3_pins: pinmux_nand_pins {
-				pinctrl-single,bits = <
-					/* EMA_OE, EMA_WE */
-					0x1c 0x00110000  0x00ff0000
-					/* EMA_CS[4],EMA_CS[3]*/
-					0x1c 0x00000110  0x00000ff0
-					/*
-					 * EMA_D[0], EMA_D[1], EMA_D[2],
-					 * EMA_D[3], EMA_D[4], EMA_D[5],
-					 * EMA_D[6], EMA_D[7]
-					 */
-					0x24 0x11111111  0xffffffff
-					/* EMA_A[1], EMA_A[2] */
-					0x30 0x01100000  0x0ff00000
-				>;
-			};
-			i2c0_pins: pinmux_i2c0_pins {
-				pinctrl-single,bits = <
-					/* I2C0_SDA,I2C0_SCL */
-					0x10 0x00002200 0x0000ff00
-				>;
-			};
-			mmc0_pins: pinmux_mmc_pins {
-				pinctrl-single,bits = <
-					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
-					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
-					 * MMCSD0_CMD    MMCSD0_CLK
-					 */
-					0x28 0x00222222  0x00ffffff
-				>;
-			};
-			ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
-				pinctrl-single,bits = <
-					/* EPWM0A */
-					0xc 0x00000002 0x0000000f
-				>;
-			};
-			ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
-				pinctrl-single,bits = <
-					/* EPWM0B */
-					0xc 0x00000020 0x000000f0
-				>;
-			};
-			ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
-				pinctrl-single,bits = <
-					/* EPWM1A */
-					0x14 0x00000002 0x0000000f
-				>;
-			};
-			ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
-				pinctrl-single,bits = <
-					/* EPWM1B */
-					0x14 0x00000020 0x000000f0
-				>;
-			};
-			ecap0_pins: pinmux_ecap0_pins {
-				pinctrl-single,bits = <
-					/* ECAP0_APWM0 */
-					0x8 0x20000000 0xf0000000
-				>;
-			};
-			ecap1_pins: pinmux_ecap1_pins {
-				pinctrl-single,bits = <
-					/* ECAP1_APWM1 */
-					0x4 0x40000000 0xf0000000
-				>;
-			};
-			ecap2_pins: pinmux_ecap2_pins {
-				pinctrl-single,bits = <
-					/* ECAP2_APWM2 */
-					0x4 0x00000004 0x0000000f
-				>;
-			};
-			spi1_pins: pinmux_spi_pins {
-				pinctrl-single,bits = <
-					/* SIMO, SOMI, CLK */
-					0x14 0x00110100 0x00ff0f00
-				>;
-			};
-			spi1_cs0_pin: pinmux_spi1_cs0 {
-				pinctrl-single,bits = <
-					/* CS0 */
-					0x14 0x00000010 0x000000f0
-				>;
-			};
-			mdio_pins: pinmux_mdio_pins {
-				pinctrl-single,bits = <
-					/* MDIO_CLK, MDIO_D */
-					0x10 0x00000088 0x000000ff
-				>;
-			};
-			mii_pins: pinmux_mii_pins {
-				pinctrl-single,bits = <
-					/*
-					 * MII_TXEN, MII_TXCLK, MII_COL
-					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
-					 * MII_TXD_0
-					 */
-					0x8 0x88888880 0xfffffff0
-					/*
-					 * MII_RXER, MII_CRS, MII_RXCLK
-					 * MII_RXDV, MII_RXD_3, MII_RXD_2
-					 * MII_RXD_1, MII_RXD_0
-					 */
-					0xc 0x88888888 0xffffffff
-				>;
-			};
-
-		};
-		serial0: serial@1c42000 {
-			compatible = "ns16550a";
-			reg = <0x42000 0x100>;
-			reg-shift = <2>;
-			interrupts = <25>;
-			status = "disabled";
-		};
-		serial1: serial@1d0c000 {
-			compatible = "ns16550a";
-			reg = <0x10c000 0x100>;
-			reg-shift = <2>;
-			interrupts = <53>;
-			status = "disabled";
-		};
-		serial2: serial@1d0d000 {
-			compatible = "ns16550a";
-			reg = <0x10d000 0x100>;
-			reg-shift = <2>;
-			interrupts = <61>;
-			status = "disabled";
-		};
-		rtc0: rtc@1c23000 {
-			compatible = "ti,da830-rtc";
-			reg = <0x23000 0x1000>;
-			interrupts = <19
-				      19>;
-			status = "disabled";
-		};
-		i2c0: i2c@1c22000 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x22000 0x1000>;
-			interrupts = <15>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-		wdt: wdt@1c21000 {
-			compatible = "ti,davinci-wdt";
-			reg = <0x21000 0x1000>;
-			status = "disabled";
-		};
-		mmc0: mmc@1c40000 {
-			compatible = "ti,da830-mmc";
-			reg = <0x40000 0x1000>;
-			interrupts = <16>;
-			status = "disabled";
-		};
-		ehrpwm0: ehrpwm@01f00000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
-			#pwm-cells = <3>;
-			reg = <0x300000 0x2000>;
-			status = "disabled";
-		};
-		ehrpwm1: ehrpwm@01f02000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
-			#pwm-cells = <3>;
-			reg = <0x302000 0x2000>;
-			status = "disabled";
-		};
-		ecap0: ecap@01f06000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
-			#pwm-cells = <3>;
-			reg = <0x306000 0x80>;
-			status = "disabled";
-		};
-		ecap1: ecap@01f07000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
-			#pwm-cells = <3>;
-			reg = <0x307000 0x80>;
-			status = "disabled";
-		};
-		ecap2: ecap@01f08000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
-			#pwm-cells = <3>;
-			reg = <0x308000 0x80>;
-			status = "disabled";
-		};
-		spi1: spi@1f0e000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "ti,da830-spi";
-			reg = <0x30e000 0x1000>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <1>;
-			interrupts = <56>;
-			status = "disabled";
-		};
-		mdio: mdio@1e24000 {
-			compatible = "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x224000 0x1000>;
-		};
-		eth0: ethernet@1e20000 {
-			compatible = "ti,davinci-dm6467-emac";
-			reg = <0x220000 0x4000>;
-			ti,davinci-ctrl-reg-offset = <0x3000>;
-			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
-			ti,davinci-ctrl-ram-offset = <0>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <33
-					34
-					35
-					36
-					>;
-		};
-		gpio: gpio@1e26000 {
-			compatible = "ti,dm6441-gpio";
-			gpio-controller;
-			reg = <0x226000 0x1000>;
-			interrupts = <42 IRQ_TYPE_EDGE_BOTH
-				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
-				45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
-				47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
-				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
-			ti,ngpio = <144>;
-			ti,davinci-gpio-unbanked = <0>;
-			status = "disabled";
-		};
-	};
-	nand_cs3@62000000 {
-		compatible = "ti,davinci-nand";
-		reg = <0x62000000 0x807ff
-		       0x68000000 0x8000>;
-		ti,davinci-chipselect = <1>;
-		ti,davinci-mask-ale = <0>;
-		ti,davinci-mask-cle = <0>;
-		ti,davinci-mask-chipsel = <0>;
-		ti,davinci-ecc-mode = "hw";
-		ti,davinci-ecc-bits = <4>;
-		ti,davinci-nand-use-bbt;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/dove-cm-a510.dts b/src/arm/dove-cm-a510.dts
deleted file mode 100644
index 50c0d6904497..000000000000
--- a/src/arm/dove-cm-a510.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Compulab CM-A510";
-	compatible = "compulab,cm-a510", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-};
-
-&uart0 { status = "okay"; };
-&uart1 { status = "okay"; };
-&sdio0 { status = "okay"; };
-&sdio1 { status = "okay"; };
-&sata0 { status = "okay"; };
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
-		compatible = "st,w25q32";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	  status = "okay";
-};
diff --git a/src/arm/dove-cubox-es.dts b/src/arm/dove-cubox-es.dts
deleted file mode 100644
index e28ef056dd17..000000000000
--- a/src/arm/dove-cubox-es.dts
+++ /dev/null
@@ -1,12 +0,0 @@
-#include "dove-cubox.dts"
-
-/ {
-	model = "SolidRun CuBox (Engineering Sample)";
-	compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
-};
-
-&sdio0 {
-	/* sdio0 card detect is connected to wrong pin on CuBox ES */
-	cd-gpios = <&gpio0 12 1>;
-	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
-};
diff --git a/src/arm/dove-cubox.dts b/src/arm/dove-cubox.dts
deleted file mode 100644
index aae7efc09b0b..000000000000
--- a/src/arm/dove-cubox.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "SolidRun CuBox";
-	compatible = "solidrun,cubox", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_18>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power";
-			gpios = <&gpio0 18 1>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 1 0>;
-			pinctrl-0 = <&pmx_gpio_1>;
-			pinctrl-names = "default";
-		};
-	};
-
-	clocks {
-		/* 25MHz reference crystal */
-		ref25: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 19 1>;
-		pinctrl-0 = <&pmx_gpio_19>;
-		pinctrl-names = "default";
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&mdio { status = "okay"; };
-&eth { status = "okay"; };
-
-&ethphy {
-	compatible = "marvell,88e1310";
-	reg = <1>;
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	si5351: clock-generator {
-		compatible = "silabs,si5351a-msop";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#clock-cells = <1>;
-
-		/* connect xtal input to 25MHz reference */
-		clocks = <&ref25>;
-
-		/* connect xtal input as source of pll0 and pll1 */
-		silabs,pll-source = <0 0>, <1 0>;
-
-		clkout0 {
-			reg = <0>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <0>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-		};
-
-		clkout2 {
-			reg = <2>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-		};
-	};
-};
-
-&sdio0 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
-		compatible = "st,w25q32";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&audio1 {
-	status = "okay";
-	clocks = <&gate_clk 13>, <&si5351 2>;
-	clock-names = "internal", "extclk";
-	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
-	pinctrl-names = "default";
-};
diff --git a/src/arm/dove-d2plug.dts b/src/arm/dove-d2plug.dts
deleted file mode 100644
index c11d3636c8e5..000000000000
--- a/src/arm/dove-d2plug.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Globalscale D2Plug";
-	compatible = "globalscale,d2plug", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
-		pinctrl-names = "default";
-
-		wlan-ap {
-			label = "wlan-ap";
-			gpios = <&gpio0 0 1>;
-		};
-
-		wlan-act {
-			label = "wlan-act";
-			gpios = <&gpio0 1 1>;
-		};
-
-		bluetooth-act {
-			label = "bt-act";
-			gpios = <&gpio0 2 1>;
-		};
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
-&mdio { status = "okay"; };
-&eth { status = "okay"; };
-
-/* Samsung M8G2F eMMC */
-&sdio0 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-/* Marvell SD8787 WLAN/BT */
-&sdio1 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Macronix MX25L3205D */
-	spi-flash@0 {
-		compatible = "st,m25l3205d";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
diff --git a/src/arm/dove-d3plug.dts b/src/arm/dove-d3plug.dts
deleted file mode 100644
index f5f59bb5a534..000000000000
--- a/src/arm/dove-d3plug.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Globalscale D3Plug";
-	compatible = "globalscale,d3plug", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
-		pinctrl-names = "default";
-
-		wlan-act {
-			label = "wlan-act";
-			gpios = <&gpio0 0 1>;
-		};
-
-		wlan-ap {
-			label = "wlan-ap";
-			gpios = <&gpio0 1 1>;
-		};
-
-		status {
-			label = "status";
-			gpios = <&gpio0 2 1>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 0>;
-			pinctrl-0 = <&pmx_gpio_8>;
-			pinctrl-names = "default";
-		};
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
-
-/* Samsung M8G2F eMMC */
-&sdio0 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-/* Marvell SD8787 WLAN/BT */
-&sdio1 {
-	status = "okay";
-	non-removable;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 2M Flash Macronix MX25L1605D */
-	spi-flash@0 {
-		compatible = "st,m25l1605d";
-		spi-max-frequency = <86000000>;
-		reg = <0>;
-	};
-};
-
-&pcie {
-	status = "okay";
-	/* Fresco Logic USB3.0 xHCI controller */
-	pcie-port@0 {
-		status = "okay";
-		reset-gpios = <&gpio0 26 1>;
-		reset-delay-us = <20000>;
-		pinctrl-0 = <&pmx_camera_gpio>;
-		pinctrl-names = "default";
-	};
-	/* Mini-PCIe slot */
-	pcie-port@1 {
-		status = "okay";
-		reset-gpios = <&gpio0 25 1>;
-	};
-};
diff --git a/src/arm/dove-dove-db.dts b/src/arm/dove-dove-db.dts
deleted file mode 100644
index bb725dca3a10..000000000000
--- a/src/arm/dove-dove-db.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Marvell DB-MV88AP510-BP Development Board";
-	compatible = "marvell,dove-db", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-};
-
-&uart0 { status = "okay"; };
-&uart1 { status = "okay"; };
-&sdio0 { status = "okay"; };
-&sdio1 { status = "okay"; };
-&sata0 { status = "okay"; };
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
-	spi-flash@0 {
-		compatible = "st,m25p32";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	  status = "okay";
-};
diff --git a/src/arm/dove.dtsi b/src/arm/dove.dtsi
deleted file mode 100644
index a5441d5482a6..000000000000
--- a/src/arm/dove.dtsi
+++ /dev/null
@@ -1,649 +0,0 @@
-/include/ "skeleton.dtsi"
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	compatible = "marvell,dove";
-	model = "Marvell Armada 88AP510 SoC";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "marvell,pj4a", "marvell,sheeva-v7";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-	};
-
-	l2: l2-cache {
-		compatible = "marvell,tauros2-cache";
-		marvell,tauros2-cache-features = <0>;
-	};
-
-	mbus {
-		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
-		pcie-io-aperture  = <0xf2000000 0x00200000>; /*   2M I/O space */
-
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000   /* MBUS regs  1M */
-			  MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000   /* AXI  regs 16M */
-			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
-			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
-			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
-
-		pcie: pcie-controller {
-			compatible = "marvell,dove-pcie";
-			status = "disabled";
-			device_type = "pci";
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&intc>;
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
-			          0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
-				  0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
-				  0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
-				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
-				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
-
-			pcie-port@0 {
-				device_type = "pci";
-				status = "disabled";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				clocks = <&gate_clk 4>;
-				marvell,pcie-port = <0>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
-
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 16>;
-			};
-
-			pcie-port@1 {
-				device_type = "pci";
-				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				clocks = <&gate_clk 5>;
-				marvell,pcie-port = <1>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
-
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 18>;
-			};
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
-				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
-				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
-				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
-
-			spi0: spi-ctrl@10600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <6>;
-				reg = <0x10600 0x28>;
-				clocks = <&core_clk 0>;
-				pinctrl-0 = <&pmx_spi0>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			i2c0: i2c-ctrl@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <11>;
-				clock-frequency = <400000>;
-				timeout-ms = <1000>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart0: serial@12000 {
-				compatible = "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <7>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <8>;
-				clocks = <&core_clk 0>;
-				pinctrl-0 = <&pmx_uart1>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart2: serial@12200 {
-				compatible = "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <9>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart3: serial@12300 {
-				compatible = "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi-ctrl@14600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <5>;
-				reg = <0x14600 0x28>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			mbusc: mbus-ctrl@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x80>, <0x800100 0x8>;
-			};
-
-			sysc: system-ctrl@20000 {
-				compatible = "marvell,orion-system-controller";
-				reg = <0x20000 0x110>;
-			};
-
-			bridge_intc: bridge-interrupt-ctrl@20110 {
-				compatible = "marvell,orion-bridge-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20110 0x8>;
-				interrupts = <0>;
-				marvell,#interrupts = <5>;
-			};
-
-			intc: main-interrupt-ctrl@20200 {
-				compatible = "marvell,orion-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20200 0x10>, <0x20210 0x10>;
-			};
-
-			timer: timer@20300 {
-				compatible = "marvell,orion-timer";
-				reg = <0x20300 0x20>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <1>, <2>;
-				clocks = <&core_clk 0>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,orion-wdt";
-				reg = <0x20300 0x28>, <0x20108 0x4>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <3>;
-				clocks = <&core_clk 0>;
-			};
-
-			crypto: crypto-engine@30000 {
-				compatible = "marvell,orion-crypto";
-				reg = <0x30000 0x10000>,
-				      <0xffffe000 0x800>;
-				reg-names = "regs", "sram";
-				interrupts = <31>;
-				clocks = <&gate_clk 15>;
-				status = "okay";
-			};
-
-			ehci0: usb-host@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x1000>;
-				interrupts = <24>;
-				clocks = <&gate_clk 0>;
-				status = "okay";
-			};
-
-			ehci1: usb-host@51000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x51000 0x1000>;
-				interrupts = <25>;
-				clocks = <&gate_clk 1>;
-				status = "okay";
-			};
-
-			xor0: dma-engine@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60a00 0x100>;
-				clocks = <&gate_clk 23>;
-				status = "okay";
-
-				channel0 {
-					interrupts = <39>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-
-				channel1 {
-					interrupts = <40>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-			};
-
-			xor1: dma-engine@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gate_clk 24>;
-				status = "okay";
-
-				channel0 {
-					interrupts = <42>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-
-				channel1 {
-					interrupts = <43>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-			};
-
-			sdio1: sdio-host@90000 {
-				compatible = "marvell,dove-sdhci";
-				reg = <0x90000 0x100>;
-				interrupts = <36>, <38>;
-				clocks = <&gate_clk 9>;
-				pinctrl-0 = <&pmx_sdio1>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			eth: ethernet-ctrl@72000 {
-				compatible = "marvell,orion-eth";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72000 0x4000>;
-				clocks = <&gate_clk 2>;
-				marvell,tx-checksum-limit = <1600>;
-				status = "disabled";
-
-				ethernet-port@0 {
-					compatible = "marvell,orion-eth-port";
-					reg = <0>;
-					interrupts = <29>;
-					/* overwrite MAC address in bootloader */
-					local-mac-address = [00 00 00 00 00 00];
-					phy-handle = <&ethphy>;
-				};
-			};
-
-			mdio: mdio-bus@72004 {
-				compatible = "marvell,orion-mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72004 0x84>;
-				interrupts = <30>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-
-				ethphy: ethernet-phy {
-					/* set phy address in board file */
-				};
-			};
-
-			sdio0: sdio-host@92000 {
-				compatible = "marvell,dove-sdhci";
-				reg = <0x92000 0x100>;
-				interrupts = <35>, <37>;
-				clocks = <&gate_clk 8>;
-				pinctrl-0 = <&pmx_sdio0>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sata0: sata-host@a0000 {
-				compatible = "marvell,orion-sata";
-				reg = <0xa0000 0x2400>;
-				interrupts = <62>;
-				clocks = <&gate_clk 3>;
-				phys = <&sata_phy0>;
-				phy-names = "port0";
-				nr-ports = <1>;
-				status = "disabled";
-			};
-
-			sata_phy0: sata-phy@a2000 {
-				compatible = "marvell,mvebu-sata-phy";
-				reg = <0xa2000 0x0334>;
-				clocks = <&gate_clk 3>;
-				clock-names = "sata";
-				#phy-cells = <0>;
-				status = "ok";
-			};
-
-			audio0: audio-controller@b0000 {
-				compatible = "marvell,dove-audio";
-				reg = <0xb0000 0x2210>;
-				interrupts = <19>, <20>;
-				clocks = <&gate_clk 12>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			audio1: audio-controller@b4000 {
-				compatible = "marvell,dove-audio";
-				reg = <0xb4000 0x2210>;
-				interrupts = <21>, <22>;
-				clocks = <&gate_clk 13>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			thermal: thermal-diode@d001c {
-				compatible = "marvell,dove-thermal";
-				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
-			};
-
-			gate_clk: clock-gating-ctrl@d0038 {
-				compatible = "marvell,dove-gating-clock";
-				reg = <0xd0038 0x4>;
-				clocks = <&core_clk 0>;
-				#clock-cells = <1>;
-			};
-
-			pinctrl: pin-ctrl@d0200 {
-				compatible = "marvell,dove-pinctrl";
-				reg = <0xd0200 0x14>,
-				      <0xd0440 0x04>;
-				clocks = <&gate_clk 22>;
-
-				pmx_gpio_0: pmx-gpio-0 {
-					marvell,pins = "mpp0";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_1: pmx-gpio-1 {
-					marvell,pins = "mpp1";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_2: pmx-gpio-2 {
-					marvell,pins = "mpp2";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_3: pmx-gpio-3 {
-					marvell,pins = "mpp3";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_4: pmx-gpio-4 {
-					marvell,pins = "mpp4";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_5: pmx-gpio-5 {
-					marvell,pins = "mpp5";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_6: pmx-gpio-6 {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_7: pmx-gpio-7 {
-					marvell,pins = "mpp7";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_8: pmx-gpio-8 {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_9: pmx-gpio-9 {
-					marvell,pins = "mpp9";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_10: pmx-gpio-10 {
-					marvell,pins = "mpp10";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_11: pmx-gpio-11 {
-					marvell,pins = "mpp11";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_12: pmx-gpio-12 {
-					marvell,pins = "mpp12";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_13: pmx-gpio-13 {
-					marvell,pins = "mpp13";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_extclk: pmx-audio1-extclk {
-					marvell,pins = "mpp13";
-					marvell,function = "audio1";
-				};
-
-				pmx_gpio_14: pmx-gpio-14 {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_15: pmx-gpio-15 {
-					marvell,pins = "mpp15";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_16: pmx-gpio-16 {
-					marvell,pins = "mpp16";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_17: pmx-gpio-17 {
-					marvell,pins = "mpp17";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_18: pmx-gpio-18 {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_19: pmx-gpio-19 {
-					marvell,pins = "mpp19";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_20: pmx-gpio-20 {
-					marvell,pins = "mpp20";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_21: pmx-gpio-21 {
-					marvell,pins = "mpp21";
-					marvell,function = "gpio";
-				};
-
-				pmx_camera: pmx-camera {
-					marvell,pins = "mpp_camera";
-					marvell,function = "camera";
-				};
-
-				pmx_camera_gpio: pmx-camera-gpio {
-					marvell,pins = "mpp_camera";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio0: pmx-sdio0 {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "sdio0";
-				};
-
-				pmx_sdio0_gpio: pmx-sdio0-gpio {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio1: pmx-sdio1 {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "sdio1";
-				};
-
-				pmx_sdio1_gpio: pmx-sdio1-gpio {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_gpio: pmx-audio1-gpio {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "i2s1/spdifo";
-				};
-
-				pmx_spi0: pmx-spi0 {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "spi0";
-				};
-
-				pmx_spi0_gpio: pmx-spi0-gpio {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "gpio";
-				};
-
-				pmx_uart1: pmx-uart1 {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "uart1";
-				};
-
-				pmx_uart1_gpio: pmx-uart1-gpio {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "gpio";
-				};
-
-				pmx_nand: pmx-nand {
-					marvell,pins = "mpp_nand";
-					marvell,function = "nand";
-				};
-
-				pmx_nand_gpo: pmx-nand-gpo {
-					marvell,pins = "mpp_nand";
-					marvell,function = "gpo";
-				};
-			};
-
-			core_clk: core-clocks@d0214 {
-				compatible = "marvell,dove-core-clock";
-				reg = <0xd0214 0x4>;
-				#clock-cells = <1>;
-			};
-
-			gpio0: gpio-ctrl@d0400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0400 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <12>, <13>, <14>, <60>;
-			};
-
-			gpio1: gpio-ctrl@d0420 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0420 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <61>;
-			};
-
-			rtc: real-time-clock@d8500 {
-				compatible = "marvell,orion-rtc";
-				reg = <0xd8500 0x20>;
-			};
-
-			gconf: global-config@e802c {
-				compatible = "marvell,dove-global-config",
-				             "syscon";
-				reg = <0xe802c 0x14>;
-			};
-
-			gpio2: gpio-ctrl@e8400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xe8400 0x0c>;
-				ngpios = <8>;
-			};
-
-			lcd1: lcd-controller@810000 {
-				compatible = "marvell,dove-lcd";
-				reg = <0x810000 0x1000>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			lcd0: lcd-controller@820000 {
-				compatible = "marvell,dove-lcd";
-				reg = <0x820000 0x1000>;
-				interrupts = <47>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/dra7-evm.dts b/src/arm/dra7-evm.dts
deleted file mode 100644
index 50f8022905a1..000000000000
--- a/src/arm/dra7-evm.dts
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "dra74x.dtsi"
-
-/ {
-	model = "TI DRA742";
-	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x60000000>; /* 1536 MB */
-	};
-
-	mmc2_3v3: fixedregulator-mmc2 {
-		compatible = "regulator-fixed";
-		regulator-name = "mmc2_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&dra7_pmx_core {
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
-			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
-			0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
-			0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
-			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
-			0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
-			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
-			0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
-			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
-			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
-		>;
-	};
-
-	mcspi2_pins: pinmux_mcspi2_pins {
-		pinctrl-single,pins = <
-			0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
-			0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
-			0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
-			0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
-			0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
-			0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
-			0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
-			0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
-		>;
-	};
-
-	qspi1_pins: pinmux_qspi1_pins {
-		pinctrl-single,pins = <
-			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
-			0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
-			0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
-			0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
-			0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
-			0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
-			0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
-			0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
-			0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
-			0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-                pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-                >;
-        };
-
-	usb2_pins: pinmux_usb2_pins {
-                pinctrl-single,pins = <
-			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
-                >;
-        };
-
-	nand_flash_x16: nand_flash_x16 {
-		/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
-		 * So NAND flash requires following switch settings:
-		 * SW5.9 (GPMC_WPN) = LOW
-		 * SW5.1 (NAND_BOOTn) = HIGH */
-		pinctrl-single,pins = <
-			0x0 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
-			0x4 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
-			0x8 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
-			0xc 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
-			0x10	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
-			0x14	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
-			0x18	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
-			0x1c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
-			0x20	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
-			0x24	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
-			0x28	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
-			0x2c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
-			0x30	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
-			0x34	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
-			0x38	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
-			0x3c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
-			0xd8	(PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
-			0xcc	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
-			0xb4	(PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
-			0xc4	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
-			0xc8	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
-			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_GPU - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <12500000>;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* CORE_VDD */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1030000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_IVAHD */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDS1V8 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo1_reg: ldo1 {
-					/* LDO1_OUT --> SDIO  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_RTCIO */
-					/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHY */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <3400000>;
-};
-
-&mcspi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-};
-
-&mcspi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&mmc2_3v3>;
-	bus-width = <8>;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_pins>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "s25fl256s1";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first four physical blocks
-		 * for a valid file to boot and the flash here is
-		 * 64KiB block size.
-		 */
-		partition@0 {
-			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
-		};
-		partition@1 {
-			label = "QSPI.SPL.backup1";
-			reg = <0x00010000 0x00010000>;
-		};
-		partition@2 {
-			label = "QSPI.SPL.backup2";
-			reg = <0x00020000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.SPL.backup3";
-			reg = <0x00030000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.u-boot";
-			reg = <0x00040000 0x00100000>;
-		};
-		partition@5 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00010000>;
-		};
-		partition@6 {
-			label = "QSPI.u-boot-env";
-			reg = <0x00150000 0x00010000>;
-		};
-		partition@7 {
-			label = "QSPI.u-boot-env.backup1";
-			reg = <0x00160000 0x0010000>;
-		};
-		partition@8 {
-			label = "QSPI.kernel";
-			reg = <0x00170000 0x0800000>;
-		};
-		partition@9 {
-			label = "QSPI.file-system";
-			reg = <0x00970000 0x01690000>;
-		};
-	};
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-};
-
-&usb2 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_pins>;
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x16>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
-	nand@0,0 {
-		reg = <0 0 4>;		/* device IO registers */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <40>;
-		gpmc,cs-wr-off-ns = <40>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <30>;
-		gpmc,adv-wr-off-ns = <30>;
-		gpmc,we-on-ns = <5>;
-		gpmc,we-off-ns = <25>;
-		gpmc,oe-on-ns = <2>;
-		gpmc,oe-off-ns = <20>;
-		gpmc,access-ns = <20>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,rd-cycle-ns = <40>;
-		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
-		gpmc,wait-on-read;
-		gpmc,wait-on-write;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000c0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001c0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env";
-			reg = <0x001e0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x0f600000>;
-		};
-	};
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
diff --git a/src/arm/dra7.dtsi b/src/arm/dra7.dtsi
deleted file mode 100644
index 97f603c4483d..000000000000
--- a/src/arm/dra7.dtsi
+++ /dev/null
@@ -1,1268 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/dra.h>
-
-#include "skeleton.dtsi"
-
-#define MAX_SOURCES 400
-#define DIRECT_IRQ(irq) (MAX_SOURCES + irq)
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	compatible = "ti,dra7xx";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		i2c4 = &i2c5;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	gic: interrupt-controller@48211000 {
-		compatible = "arm,cortex-a15-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		arm,routable-irqs = <192>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap5-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the SOC interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "ti,dra7-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x44000000 0x1000000>,
-		      <0x45000000 0x1000>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
-
-		prm: prm@4ae06000 {
-			compatible = "ti,dra7-prm";
-			reg = <0x4ae06000 0x3000>;
-
-			prm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prm_clockdomains: clockdomains {
-			};
-		};
-
-		axi@0 {
-			compatible = "simple-bus";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x51000000 0x51000000 0x3000
-				  0x0	     0x20000000 0x10000000>;
-			pcie@51000000 {
-				compatible = "ti,dra7-pcie";
-				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
-				reg-names = "rc_dbics", "ti_conf", "config";
-				interrupts = <0 232 0x4>, <0 233 0x4>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
-				#interrupt-cells = <1>;
-				num-lanes = <1>;
-				ti,hwmods = "pcie1";
-				phys = <&pcie1_phy>;
-				phy-names = "pcie-phy0";
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 1>,
-						<0 0 0 2 &pcie1_intc 2>,
-						<0 0 0 3 &pcie1_intc 3>,
-						<0 0 0 4 &pcie1_intc 4>;
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		axi@1 {
-			compatible = "simple-bus";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x51800000 0x51800000 0x3000
-				  0x0	     0x30000000 0x10000000>;
-			status = "disabled";
-			pcie@51000000 {
-				compatible = "ti,dra7-pcie";
-				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
-				reg-names = "rc_dbics", "ti_conf", "config";
-				interrupts = <0 355 0x4>, <0 356 0x4>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
-				#interrupt-cells = <1>;
-				num-lanes = <1>;
-				ti,hwmods = "pcie2";
-				phys = <&pcie2_phy>;
-				phy-names = "pcie-phy0";
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 1>,
-						<0 0 0 2 &pcie2_intc 2>,
-						<0 0 0 3 &pcie2_intc 3>,
-						<0 0 0 4 &pcie2_intc 4>;
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		cm_core_aon: cm_core_aon@4a005000 {
-			compatible = "ti,dra7-cm-core-aon";
-			reg = <0x4a005000 0x2000>;
-
-			cm_core_aon_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_core_aon_clockdomains: clockdomains {
-			};
-		};
-
-		cm_core: cm_core@4a008000 {
-			compatible = "ti,dra7-cm-core";
-			reg = <0x4a008000 0x3000>;
-
-			cm_core_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_core_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@4ae04000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4ae04000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
-
-		dra7_ctrl_general: tisyscon@4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
-		};
-
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0 0x4>;
-			syscon = <&dra7_ctrl_general>;
-			pbias_mmc_reg: pbias_mmc_omap5 {
-				regulator-name = "pbias_mmc_omap5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
-		dra7_pmx_core: pinmux@4a003400 {
-			compatible = "pinctrl-single";
-			reg = <0x4a003400 0x0464>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <0x3fffffff>;
-		};
-
-		sdma: dma-controller@4a056000 {
-			compatible = "ti,omap4430-sdma";
-			reg = <0x4a056000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
-		};
-
-		gpio1: gpio@4ae10000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4ae10000 0x200>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio1";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio2: gpio@48055000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48055000 0x200>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio3: gpio@48057000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48057000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio4: gpio@48059000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48059000 0x200>;
-			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio5: gpio@4805b000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805b000 0x200>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio6: gpio@4805d000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805d000 0x200>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio7: gpio@48051000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48051000 0x200>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio7";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		gpio8: gpio@48053000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48053000 0x200>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio8";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806a000 0x100>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806c000 0x100>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48020000 0x100>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806e000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-                        status = "disabled";
-		};
-
-		uart5: serial@48066000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48066000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart6: serial@48068000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48068000 0x100>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart7: serial@48420000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48420000 0x100>;
-			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart7";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart8: serial@48422000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48422000 0x100>;
-			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart8";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart9: serial@48424000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48424000 0x100>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart9";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart10: serial@4ae2b000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4ae2b000 0x100>;
-			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart10";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		mailbox1: mailbox@4a0f4000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4a0f4000 0x200>;
-			ti,hwmods = "mailbox1";
-			ti,mbox-num-users = <3>;
-			ti,mbox-num-fifos = <8>;
-			status = "disabled";
-		};
-
-		mailbox2: mailbox@4883a000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883a000 0x200>;
-			ti,hwmods = "mailbox2";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox3: mailbox@4883c000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883c000 0x200>;
-			ti,hwmods = "mailbox3";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox4: mailbox@4883e000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883e000 0x200>;
-			ti,hwmods = "mailbox4";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox5: mailbox@48840000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48840000 0x200>;
-			ti,hwmods = "mailbox5";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox6: mailbox@48842000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48842000 0x200>;
-			ti,hwmods = "mailbox6";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox7: mailbox@48844000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48844000 0x200>;
-			ti,hwmods = "mailbox7";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox8: mailbox@48846000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48846000 0x200>;
-			ti,hwmods = "mailbox8";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox9: mailbox@4885e000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4885e000 0x200>;
-			ti,hwmods = "mailbox9";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox10: mailbox@48860000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48860000 0x200>;
-			ti,hwmods = "mailbox10";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox11: mailbox@48862000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48862000 0x200>;
-			ti,hwmods = "mailbox11";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox12: mailbox@48864000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48864000 0x200>;
-			ti,hwmods = "mailbox12";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox13: mailbox@48802000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48802000 0x200>;
-			ti,hwmods = "mailbox13";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		timer1: timer@4ae18000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4ae18000 0x80>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48032000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48032000 0x80>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48034000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48034000 0x80>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48036000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48036000 0x80>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@48820000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48820000 0x80>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-		};
-
-		timer6: timer@48822000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48822000 0x80>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-			ti,timer-pwm;
-		};
-
-		timer7: timer@48824000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48824000 0x80>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@48826000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48826000 0x80>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			ti,timer-dsp;
-			ti,timer-pwm;
-		};
-
-		timer9: timer@4803e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4803e000 0x80>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48086000 0x80>;
-			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48088000 0x80>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		timer13: timer@48828000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48828000 0x80>;
-			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer13";
-			status = "disabled";
-		};
-
-		timer14: timer@4882a000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882a000 0x80>;
-			interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer14";
-			status = "disabled";
-		};
-
-		timer15: timer@4882c000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882c000 0x80>;
-			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer15";
-			status = "disabled";
-		};
-
-		timer16: timer@4882e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882e000 0x80>;
-			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer16";
-			status = "disabled";
-		};
-
-		wdt2: wdt@4ae14000 {
-			compatible = "ti,omap4-wdt";
-			reg = <0x4ae14000 0x80>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		hwspinlock: spinlock@4a0f6000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x4a0f6000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "dmm";
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48070000 0x100>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-			status = "disabled";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48072000 0x100>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-			status = "disabled";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48060000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-			status = "disabled";
-		};
-
-		i2c4: i2c@4807a000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807a000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c4";
-			status = "disabled";
-		};
-
-		i2c5: i2c@4807c000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807c000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c5";
-			status = "disabled";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x4809c000 0x400>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480b4000 0x400>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480ad000 0x400>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmc4: mmc@480d1000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d1000 0x400>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc4";
-			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
-			      <0x4ae06014 0x4>, <0x4a003b20 0x8>,
-			      <0x4ae0c158 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x80>;
-			/* LDOVBBMPU_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMPU_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1060000		0	0x0	0 0x02000000 0x01F00000
-			1160000		0	0x4	0 0x02000000 0x01F00000
-			1210000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_ivahd: regulator-abb-ivahd {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_ivahd";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
-			      <0x4a002470 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x40000000>;
-			/* LDOVBBIVA_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBIVA_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1055000		0	0x0	0 0x02000000 0x01F00000
-			1150000		0	0x4	0 0x02000000 0x01F00000
-			1250000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_dspeve: regulator-abb-dspeve {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_dspeve";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
-			      <0x4a00246c 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x20000000>;
-			/* LDOVBBDSPEVE_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBDSPEVE_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1055000		0	0x0	0 0x02000000 0x01F00000
-			1150000		0	0x4	0 0x02000000 0x01F00000
-			1250000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_gpu: regulator-abb-gpu {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_gpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
-			      <0x4ae06010 0x4>, <0x4a003b08 0x8>,
-			      <0x4ae0c154 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x10000000>;
-			/* LDOVBBGPU_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBGPU_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1090000		0	0x0	0 0x02000000 0x01F00000
-			1210000		0	0x4	0 0x02000000 0x01F00000
-			1280000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48098000 0x200>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-			status = "disabled";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x4809a000 0x200>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480b8000 0x200>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
-			dma-names = "tx0", "rx0";
-			status = "disabled";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480ba000 0x200>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-			status = "disabled";
-		};
-
-		qspi: qspi@4b300000 {
-			compatible = "ti,dra7xxx-qspi";
-			reg = <0x4b300000 0x100>;
-			reg-names = "qspi_base";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			clocks = <&qspi_gfclk_div>;
-			clock-names = "fck";
-			num-cs = <4>;
-			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
-		/* OCP2SCP3 */
-		ocp2scp@4a090000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			reg = <0x4a090000 0x20>;
-			ti,hwmods = "ocp2scp3";
-			sata_phy: phy@4A096000 {
-				compatible = "ti,phy-pipe3-sata";
-				reg = <0x4A096000 0x80>, /* phy_rx */
-				      <0x4A096400 0x64>, /* phy_tx */
-				      <0x4A096800 0x40>; /* pll_ctrl */
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin1>;
-				clock-names = "sysclk";
-				#phy-cells = <0>;
-			};
-
-			pcie1_phy: pciephy@4a094000 {
-				compatible = "ti,phy-pipe3-pcie";
-				reg = <0x4a094000 0x80>, /* phy_rx */
-				      <0x4a094400 0x64>; /* phy_tx */
-				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie1phy>;
-				clocks = <&dpll_pcie_ref_ck>,
-					 <&dpll_pcie_ref_m2ldo_ck>,
-					 <&optfclk_pciephy1_32khz>,
-					 <&optfclk_pciephy1_clk>,
-					 <&optfclk_pciephy1_div_clk>,
-					 <&optfclk_pciephy_div>;
-				clock-names = "dpll_ref", "dpll_ref_m2",
-					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
-				#phy-cells = <0>;
-				id = <1>;
-				ti,hwmods = "pcie1-phy";
-			};
-
-			pcie2_phy: pciephy@4a095000 {
-				compatible = "ti,phy-pipe3-pcie";
-				reg = <0x4a095000 0x80>, /* phy_rx */
-				      <0x4a095400 0x64>; /* phy_tx */
-				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie2phy>;
-				clocks = <&dpll_pcie_ref_ck>,
-					 <&dpll_pcie_ref_m2ldo_ck>,
-					 <&optfclk_pciephy2_32khz>,
-					 <&optfclk_pciephy2_clk>,
-					 <&optfclk_pciephy2_div_clk>,
-					 <&optfclk_pciephy_div>;
-				clock-names = "dpll_ref", "dpll_ref_m2",
-					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
-				#phy-cells = <0>;
-				ti,hwmods = "pcie2-phy";
-				id = <2>;
-				status = "disabled";
-			};
-		};
-
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&sata_ref_clk>;
-			ti,hwmods = "sata";
-		};
-
-		omap_control_pcie1phy: control-phy@0x4a003c40 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
-		omap_control_pcie2phy: control-pcie@0x4a003c44 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-			status = "disabled";
-		};
-
-		omap_control_usb2phy1: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy1: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb2phy2: control-phy@0x4a002e74 {
-			compatible = "ti,control-phy-usb2-dra7";
-			reg = <0x4a002e74 0x4>;
-			reg-names = "power";
-		};
-
-		/* OCP2SCP1 */
-		ocp2scp@4a080000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			reg = <0x4a080000 0x20>;
-			ti,hwmods = "ocp2scp1";
-
-			usb2_phy1: phy@4a084000 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a084000 0x400>;
-				ctrl-module = <&omap_control_usb2phy1>;
-				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names =	"wkupclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-
-			usb2_phy2: phy@4a085000 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a085000 0x400>;
-				ctrl-module = <&omap_control_usb2phy2>;
-				clocks = <&usb_phy2_always_on_clk32k>,
-					 <&usb_otg_ss2_refclk960m>;
-				clock-names =	"wkupclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-
-			usb3_phy1: phy@4a084400 {
-				compatible = "ti,omap-usb3";
-				reg = <0x4a084400 0x80>,
-				      <0x4a084800 0x64>,
-				      <0x4a084c00 0x40>;
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy1>;
-				clocks = <&usb_phy3_always_on_clk32k>,
-					 <&sys_clkin1>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names =	"wkupclk",
-						"sysclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		omap_dwc3_1@48880000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss1";
-			reg = <0x48880000 0x10000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			usb1: usb@48890000 {
-				compatible = "snps,dwc3";
-				reg = <0x48890000 0x17000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy1>, <&usb3_phy1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				tx-fifo-resize;
-				maximum-speed = "super-speed";
-				dr_mode = "otg";
-			};
-		};
-
-		omap_dwc3_2@488c0000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss2";
-			reg = <0x488c0000 0x10000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			usb2: usb@488d0000 {
-				compatible = "snps,dwc3";
-				reg = <0x488d0000 0x17000>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy2>;
-				phy-names = "usb2-phy";
-				tx-fifo-resize;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-			};
-		};
-
-		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
-		omap_dwc3_3@48900000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss3";
-			reg = <0x48900000 0x10000>;
-			interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			status = "disabled";
-			usb3: usb@48910000 {
-				compatible = "snps,dwc3";
-				reg = <0x48910000 0x17000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				tx-fifo-resize;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-			};
-		};
-
-		omap_dwc3_4@48940000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss4";
-			reg = <0x48940000 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			status = "disabled";
-			usb4: usb@48950000 {
-				compatible = "snps,dwc3";
-				reg = <0x48950000 0x17000>;
-				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-				tx-fifo-resize;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-			};
-		};
-
-		elm: elm@48078000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48078000 0xfc0>;      /* device IO registers */
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "elm";
-			status = "disabled";
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x50000000 0x37c>;      /* device IO registers */
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		atl: atl@4843c000 {
-			compatible = "ti,dra7-atl";
-			reg = <0x4843c000 0x3ff>;
-			ti,hwmods = "atl";
-			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
-					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
-			clocks = <&atl_gfclk_mux>;
-			clock-names = "fck";
-			status = "disabled";
-		};
-
-		crossbar_mpu: crossbar@4a020000 {
-			compatible = "ti,irq-crossbar";
-			reg = <0x4a002a48 0x130>;
-			ti,max-irqs = <160>;
-			ti,max-crossbar-sources = <MAX_SOURCES>;
-			ti,reg-size = <2>;
-			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
-			ti,irqs-skip = <10 133 139 140>;
-			ti,irqs-safe-map = <0>;
-		};
-	};
-};
-
-/include/ "dra7xx-clocks.dtsi"
diff --git a/src/arm/dra72-evm.dts b/src/arm/dra72-evm.dts
deleted file mode 100644
index 514702348818..000000000000
--- a/src/arm/dra72-evm.dts
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "dra72x.dtsi"
-
-/ {
-	model = "TI DRA722";
-	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1024 MB */
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/src/arm/dra72x.dtsi b/src/arm/dra72x.dtsi
deleted file mode 100644
index f1ec22f6ebf4..000000000000
--- a/src/arm/dra72x.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include "dra7.dtsi"
-
-/ {
-	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-	};
-};
diff --git a/src/arm/dra74x.dtsi b/src/arm/dra74x.dtsi
deleted file mode 100644
index a4e8bb9f95c0..000000000000
--- a/src/arm/dra74x.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include "dra7.dtsi"
-
-/ {
-	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000	1060000
-				1176000	1160000
-				>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-	};
-};
diff --git a/src/arm/dra7xx-clocks.dtsi b/src/arm/dra7xx-clocks.dtsi
deleted file mode 100644
index 2c05b3f017fa..000000000000
--- a/src/arm/dra7xx-clocks.dtsi
+++ /dev/null
@@ -1,2058 +0,0 @@
-/*
- * Device Tree Source for DRA7xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_core_aon_clocks {
-	atl_clkin0_ck: atl_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	atl_clkin1_ck: atl_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	atl_clkin2_ck: atl_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	atl_clkin3_ck: atl_clkin3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
-	};
-
-	hdmi_clkin_ck: hdmi_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	mlb_clkin_ck: mlb_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	mlbp_clkin_ck: mlbp_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
-	ref_clkin0_ck: ref_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin1_ck: ref_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin2_ck: ref_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin3_ck: ref_clkin3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	rmii_clk_ck: rmii_clk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	sdvenc_clkin_ck: sdvenc_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_20000000_ck: virt_20000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	sys_clkin2: sys_clkin2 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <22579200>;
-	};
-
-	usb_otg_clkin_ck: usb_otg_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video1_clkin_ck: video1_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video1_m2_clkin_ck: video1_m2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video2_clkin_ck: video2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video2_m2_clkin_ck: video2_m2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_abe_ck>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	abe_clk: abe_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	dpll_abe_m2_ck: dpll_abe_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap5-mpu-dpll-clock";
-		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dclk_div: mpu_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_mpu_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_dsp_ck: dpll_dsp_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
-		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
-	};
-
-	dpll_dsp_m2_ck: dpll_dsp_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0244>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-	};
-
-	dpll_iva_m2_ck: dpll_iva_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	iva_dclk: iva_dclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_iva_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_gpu_ck: dpll_gpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
-	};
-
-	dpll_gpu_m2_ck: dpll_gpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02e8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0220>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_ck: dpll_gmac_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
-	};
-
-	dpll_gmac_m2_ck: dpll_gmac_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02b8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	video2_dclk_div: video2_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_dclk_div: video1_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_dclk_div: hdmi_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_eve_ck: dpll_eve_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
-		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
-	};
-
-	dpll_eve_m2_ck: dpll_eve_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_eve_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0294>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	eve_dclk_div: eve_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_eve_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0228>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_dsp_ck>;
-	};
-
-	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0248>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_gmac_ck>;
-	};
-
-	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02bc>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	gmii_m_clk_div: gmii_m_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_gmac_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hdmi_clk2_div: hdmi_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_div_clk: hdmi_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3_iclk_div: l3_iclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		ti,max-div = <2>;
-		ti,bit-shift = <4>;
-		reg = <0x0100>;
-		clocks = <&dpll_core_h12x2_ck>;
-		ti,index-power-of-two;
-	};
-
-	l4_root_clk_div: l4_root_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	video1_clk2_div: video1_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_div_clk: video1_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_clk2_div: video2_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_div_clk: video2_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ipu1_gfclk_mux: ipu1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0520>;
-	};
-
-	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
-		reg = <0x0550>;
-	};
-
-	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0550>;
-	};
-
-	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x0550>;
-	};
-
-	timer5_gfclk_mux: timer5_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0558>;
-	};
-
-	timer6_gfclk_mux: timer6_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0560>;
-	};
-
-	timer7_gfclk_mux: timer7_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0568>;
-	};
-
-	timer8_gfclk_mux: timer8_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0570>;
-	};
-
-	uart6_gfclk_mux: uart6_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0580>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin1: sys_clkin1 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0118>;
-	};
-
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x0114>;
-	};
-
-	abe_dpll_clk_mux: abe_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	abe_24m_fclk: abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x011c>;
-		ti,dividers = <8>, <16>;
-	};
-
-	aess_fclk: aess_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&abe_clk>;
-		reg = <0x0178>;
-		ti,max-div = <2>;
-	};
-
-	abe_giclk_div: abe_giclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&aess_fclk>;
-		reg = <0x0174>;
-		ti,max-div = <2>;
-	};
-
-	abe_lp_clk_div: abe_lp_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x01d8>;
-		ti,dividers = <16>, <32>;
-	};
-
-	abe_sys_clk_div: abe_sys_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		reg = <0x0120>;
-		ti,max-div = <2>;
-	};
-
-	adc_gfclk_mux: adc_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
-		reg = <0x01dc>;
-	};
-
-	sys_clk1_dclk_div: sys_clk1_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c8>;
-		ti,index-power-of-two;
-	};
-
-	sys_clk2_dclk_div: sys_clk2_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin2>;
-		ti,max-div = <64>;
-		reg = <0x01cc>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_dclk_div: per_abe_x1_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01bc>;
-		ti,index-power-of-two;
-	};
-
-	dsp_gclk_div: dsp_gclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x018c>;
-		ti,index-power-of-two;
-	};
-
-	gpu_dclk: gpu_dclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gpu_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01a0>;
-		ti,index-power-of-two;
-	};
-
-	emif_phy_dclk_div: emif_phy_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0190>;
-		ti,index-power-of-two;
-	};
-
-	gmac_250m_dclk_div: gmac_250m_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x019c>;
-		ti,index-power-of-two;
-	};
-
-	l3init_480m_dclk_div: l3init_480m_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01ac>;
-		ti,index-power-of-two;
-	};
-
-	usb_otg_dclk_div: usb_otg_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&usb_otg_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0184>;
-		ti,index-power-of-two;
-	};
-
-	sata_dclk_div: sata_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c0>;
-		ti,index-power-of-two;
-	};
-
-	pcie2_dclk_div: pcie2_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b8>;
-		ti,index-power-of-two;
-	};
-
-	pcie_dclk_div: pcie_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&apll_pcie_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b4>;
-		ti,index-power-of-two;
-	};
-
-	emu_dclk_div: emu_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x0194>;
-		ti,index-power-of-two;
-	};
-
-	secure_32k_dclk_div: secure_32k_dclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&secure_32k_clk_src_ck>;
-		ti,max-div = <64>;
-		reg = <0x01c4>;
-		ti,index-power-of-two;
-	};
-
-	clkoutmux0_clk_mux: clkoutmux0_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0158>;
-	};
-
-	clkoutmux1_clk_mux: clkoutmux1_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x015c>;
-	};
-
-	clkoutmux2_clk_mux: clkoutmux2_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0160>;
-	};
-
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin1>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	eve_clk: eve_clk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
-		reg = <0x0180>;
-	};
-
-	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x01a4>;
-	};
-
-	mlb_clk: mlb_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mlb_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0134>;
-		ti,index-power-of-two;
-	};
-
-	mlbp_clk: mlbp_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mlbp_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0130>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0138>;
-		ti,index-power-of-two;
-	};
-
-	timer_sys_clk_div: timer_sys_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		reg = <0x0144>;
-		ti,max-div = <2>;
-	};
-
-	video1_dpll_clk_mux: video1_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x01d0>;
-	};
-
-	video2_dpll_clk_mux: video2_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x01d4>;
-	};
-
-	wkupaon_iclk_mux: wkupaon_iclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
-		reg = <0x0108>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1838>;
-	};
-
-	dcan1_sys_clk_mux: dcan1_sys_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		ti,bit-shift = <24>;
-		reg = <0x1888>;
-	};
-
-	timer1_gfclk_mux: timer1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1840>;
-	};
-
-	uart10_gfclk_mux: uart10_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1880>;
-	};
-};
-&cm_core_clocks {
-	dpll_pcie_ref_ck: dpll_pcie_ref_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin1>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
-	};
-
-	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c 0x4>;
-		ti,bit-shift = <7>;
-	};
-
-	apll_pcie_ck: apll_pcie_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-apll-clock";
-		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
-		reg = <0x021c>, <0x0220>;
-	};
-
-	optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <8>;
-	};
-
-	optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <8>;
-	};
-
-	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
-		compatible = "ti,divider-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c>;
-		ti,dividers = <2>, <1>;
-		ti,bit-shift = <8>;
-		ti,max-div = <2>;
-	};
-
-	optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <9>;
-	};
-
-	optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <9>;
-	};
-
-	optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&optfclk_pciephy_div>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <10>;
-	};
-
-	optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&optfclk_pciephy_div>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <10>;
-	};
-
-	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_m2_ck: apll_pcie_m2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_usb_ck: dpll_usb_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_per_ck>;
-	};
-
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h13x2_ck: dpll_per_h13x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0160>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	func_128m_clk: func_128m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_48m_fclk: func_48m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_60m_fclk: l3init_60m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	l3init_960m_gfclk: l3init_960m_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x06c0>;
-	};
-
-	dss_32khz_clk: dss_32khz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x1120>;
-	};
-
-	dss_48mhz_clk: dss_48mhz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1120>;
-	};
-
-	dss_dss_clk: dss_dss_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_h12x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1120>;
-	};
-
-	dss_hdmi_clk: dss_hdmi_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&hdmi_dpll_clk_mux>;
-		ti,bit-shift = <10>;
-		reg = <0x1120>;
-	};
-
-	dss_video1_clk: dss_video1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&video1_dpll_clk_mux>;
-		ti,bit-shift = <12>;
-		reg = <0x1120>;
-	};
-
-	dss_video2_clk: dss_video2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&video2_dpll_clk_mux>;
-		ti,bit-shift = <13>;
-		reg = <0x1120>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1760>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1768>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1770>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1778>;
-	};
-
-	gpio6_dbclk: gpio6_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1780>;
-	};
-
-	gpio7_dbclk: gpio7_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1810>;
-	};
-
-	gpio8_dbclk: gpio8_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1818>;
-	};
-
-	mmc1_clk32k: mmc1_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1328>;
-	};
-
-	mmc2_clk32k: mmc2_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1330>;
-	};
-
-	mmc3_clk32k: mmc3_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1820>;
-	};
-
-	mmc4_clk32k: mmc4_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1828>;
-	};
-
-	sata_ref_clk: sata_ref_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin1>;
-		ti,bit-shift = <8>;
-		reg = <0x1388>;
-	};
-
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_960m_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x13f0>;
-	};
-
-	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_960m_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1340>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0688>;
-	};
-
-	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0698>;
-	};
-
-	atl_dpll_clk_mux: atl_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0c00>;
-	};
-
-	atl_gfclk_mux: atl_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>;
-		ti,bit-shift = <26>;
-		reg = <0x0c00>;
-	};
-
-	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x13d0>;
-		ti,dividers = <2>;
-	};
-
-	gmac_rft_clk_mux: gmac_rft_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>;
-		ti,bit-shift = <25>;
-		reg = <0x13d0>;
-	};
-
-	gpu_core_gclk_mux: gpu_core_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1220>;
-	};
-
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x1220>;
-	};
-
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&wkupaon_iclk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0e50>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
-		reg = <0x1860>;
-	};
-
-	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1860>;
-	};
-
-	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1860>;
-	};
-
-	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1868>;
-	};
-
-	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1868>;
-	};
-
-	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1898>;
-	};
-
-	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1898>;
-	};
-
-	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1878>;
-	};
-
-	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1878>;
-	};
-
-	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1904>;
-	};
-
-	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1904>;
-	};
-
-	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1908>;
-	};
-
-	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1908>;
-	};
-
-	mcasp8_ahclk_mux: mcasp8_ahclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <22>;
-		reg = <0x1890>;
-	};
-
-	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <24>;
-		reg = <0x1890>;
-	};
-
-	mmc1_fclk_mux: mmc1_fclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1328>;
-	};
-
-	mmc1_fclk_div: mmc1_fclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc1_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1328>;
-		ti,index-power-of-two;
-	};
-
-	mmc2_fclk_mux: mmc2_fclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1330>;
-	};
-
-	mmc2_fclk_div: mmc2_fclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc2_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1330>;
-		ti,index-power-of-two;
-	};
-
-	mmc3_gfclk_mux: mmc3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1820>;
-	};
-
-	mmc3_gfclk_div: mmc3_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc3_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1820>;
-		ti,index-power-of-two;
-	};
-
-	mmc4_gfclk_mux: mmc4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1828>;
-	};
-
-	mmc4_gfclk_div: mmc4_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc4_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1828>;
-		ti,index-power-of-two;
-	};
-
-	qspi_gfclk_mux: qspi_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1838>;
-	};
-
-	qspi_gfclk_div: qspi_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&qspi_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1838>;
-		ti,index-power-of-two;
-	};
-
-	timer10_gfclk_mux: timer10_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1728>;
-	};
-
-	timer11_gfclk_mux: timer11_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1730>;
-	};
-
-	timer13_gfclk_mux: timer13_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17c8>;
-	};
-
-	timer14_gfclk_mux: timer14_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17d0>;
-	};
-
-	timer15_gfclk_mux: timer15_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17d8>;
-	};
-
-	timer16_gfclk_mux: timer16_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1830>;
-	};
-
-	timer2_gfclk_mux: timer2_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1738>;
-	};
-
-	timer3_gfclk_mux: timer3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1740>;
-	};
-
-	timer4_gfclk_mux: timer4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1748>;
-	};
-
-	timer9_gfclk_mux: timer9_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1750>;
-	};
-
-	uart1_gfclk_mux: uart1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1840>;
-	};
-
-	uart2_gfclk_mux: uart2_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1848>;
-	};
-
-	uart3_gfclk_mux: uart3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1850>;
-	};
-
-	uart4_gfclk_mux: uart4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1858>;
-	};
-
-	uart5_gfclk_mux: uart5_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1870>;
-	};
-
-	uart7_gfclk_mux: uart7_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18d0>;
-	};
-
-	uart8_gfclk_mux: uart8_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18e0>;
-	};
-
-	uart9_gfclk_mux: uart9_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18e8>;
-	};
-
-	vip1_gclk_mux: vip1_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1020>;
-	};
-
-	vip2_gclk_mux: vip2_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1028>;
-	};
-
-	vip3_gclk_mux: vip3_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1030>;
-	};
-};
-
-&cm_core_clockdomains {
-	coreaon_clkdm: coreaon_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_usb_ck>;
-	};
-};
diff --git a/src/arm/ea3250.dts b/src/arm/ea3250.dts
deleted file mode 100644
index a4ba31b23c88..000000000000
--- a/src/arm/ea3250.dts
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Embedded Artists LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "lpc32xx.dtsi"
-
-/ {
-	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
-	compatible = "ea,ea3250", "nxp,lpc3250";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x4000000>;
-	};
-
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
-		};
-
-		/* Here, choose exactly one from: ohci, usbd */
-		ohci@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-
-/*
-		usbd@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-*/
-
-		/* 128MB Flash via SLC NAND controller */
-		slc: flash@20020000 {
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nxp,wdr-clks = <14>;
-			nxp,wwidth = <260000000>;
-			nxp,whold = <104000000>;
-			nxp,wsetup = <200000000>;
-			nxp,rdr-clks = <14>;
-			nxp,rwidth = <34666666>;
-			nxp,rhold = <104000000>;
-			nxp,rsetup = <200000000>;
-			nand-on-flash-bbt;
-			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-			mtd0@00000000 {
-				label = "ea3250-boot";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-
-			mtd1@00080000 {
-				label = "ea3250-uboot";
-				reg = <0x00080000 0x000c0000>;
-				read-only;
-			};
-
-			mtd2@00140000 {
-				label = "ea3250-kernel";
-				reg = <0x00140000 0x00400000>;
-			};
-
-			mtd3@00540000 {
-				label = "ea3250-rootfs";
-				reg = <0x00540000 0x07ac0000>;
-			};
-		};
-
-		apb {
-			uart5: serial@40090000 {
-				status = "okay";
-			};
-
-			uart3: serial@40080000 {
-				status = "okay";
-			};
-
-			uart6: serial@40098000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@400A0000 {
-				clock-frequency = <100000>;
-
-				eeprom@50 {
-					compatible = "at,24c256";
-					reg = <0x50>;
-				};
-
-				eeprom@57 {
-					compatible = "at,24c64";
-					reg = <0x57>;
-				};
-
-				uda1380: uda1380@18 {
-					compatible = "nxp,uda1380";
-					reg = <0x18>;
-					power-gpio = <&gpio 0x59 0>;
-					reset-gpio = <&gpio 0x51 0>;
-					dac-clk = "wspll";
-				};
-
-				pca9532: pca9532@60 {
-					compatible = "nxp,pca9532";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x60>;
-				};
-			};
-
-			i2c2: i2c@400A8000 {
-				clock-frequency = <100000>;
-			};
-
-			i2cusb: i2c@31020300 {
-				clock-frequency = <100000>;
-
-				isp1301: usb-transceiver@2d {
-					compatible = "nxp,isp1301";
-					reg = <0x2d>;
-				};
-			};
-
-			sd@20098000 {
-				wp-gpios = <&pca9532 5 0>;
-				cd-gpios = <&pca9532 4 0>;
-				cd-inverted;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		fab {
-			uart1: serial@40014000 {
-				status = "okay";
-			};
-
-			/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
-			adc@40048000 {
-				status = "okay";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-		button@21 {
-			label = "Interrupt Key";
-			linux,code = <103>;
-			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
-		};
-		key1 {
-			label = "KEY1";
-			linux,code = <1>;
-			gpios = <&pca9532 0 0>;
-		};
-		key2 {
-			label = "KEY2";
-			linux,code = <2>;
-			gpios = <&pca9532 1 0>;
-		};
-		key3 {
-			label = "KEY3";
-			linux,code = <3>;
-			gpios = <&pca9532 2 0>;
-		};
-		key4 {
-			label = "KEY4";
-			linux,code = <4>;
-			gpios = <&pca9532 3 0>;
-		};
-		joy0 {
-			label = "Joystick Key 0";
-			linux,code = <10>;
-			gpios = <&gpio 2 0 0>; /* P2.0 */
-		};
-		joy1 {
-			label = "Joystick Key 1";
-			linux,code = <11>;
-			gpios = <&gpio 2 1 0>; /* P2.1 */
-		};
-		joy2 {
-			label = "Joystick Key 2";
-			linux,code = <12>;
-			gpios = <&gpio 2 2 0>; /* P2.2 */
-		};
-		joy3 {
-			label = "Joystick Key 3";
-			linux,code = <13>;
-			gpios = <&gpio 2 3 0>; /* P2.3 */
-		};
-		joy4 {
-			label = "Joystick Key 4";
-			linux,code = <14>;
-			gpios = <&gpio 2 4 0>; /* P2.4 */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* LEDs on OEM Board */
-
-		led1 {
-			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
-			linux,default-trigger = "timer";
-			default-state = "off";
-		};
-
-		led2 {
-			gpios = <&gpio 2 10 1>; /* P2.10, active low */
-			default-state = "off";
-		};
-
-		led3 {
-			gpios = <&gpio 2 11 1>; /* P2.11, active low */
-			default-state = "off";
-		};
-
-		led4 {
-			gpios = <&gpio 2 12 1>; /* P2.12, active low */
-			default-state = "off";
-		};
-
-		/* LEDs on Base Board */
-
-		lede1 {
-			gpios = <&pca9532 8 0>;
-			default-state = "off";
-		};
-		lede2 {
-			gpios = <&pca9532 9 0>;
-			default-state = "off";
-		};
-		lede3 {
-			gpios = <&pca9532 10 0>;
-			default-state = "off";
-		};
-		lede4 {
-			gpios = <&pca9532 11 0>;
-			default-state = "off";
-		};
-		lede5 {
-			gpios = <&pca9532 12 0>;
-			default-state = "off";
-		};
-		lede6 {
-			gpios = <&pca9532 13 0>;
-			default-state = "off";
-		};
-		lede7 {
-			gpios = <&pca9532 14 0>;
-			default-state = "off";
-		};
-		lede8 {
-			gpios = <&pca9532 15 0>;
-			default-state = "off";
-		};
-	};
-};
diff --git a/src/arm/ecx-2000.dts b/src/arm/ecx-2000.dts
deleted file mode 100644
index 2ccbb57fbfa8..000000000000
--- a/src/arm/ecx-2000.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
-	model = "Calxeda ECX-2000";
-	compatible = "calxeda,ecx-2000";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	clock-ranges;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-	};
-
-	memory@0 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
-	};
-
-	memory@200000000 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
-	};
-
-	soc {
-		ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
-
-		timer {
-			compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; 			interrupts = <1 13 0xf08>,
-				<1 14 0xf08>,
-				<1 11 0xf08>,
-				<1 10 0xf08>;
-		};
-
-		memory-controller@fff00000 {
-			compatible = "calxeda,ecx-2000-ddr-ctrl";
-			reg = <0xfff00000 0x1000>;
-			interrupts = <0 91 4>;
-		};
-
-		intc: interrupt-controller@fff11000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
-			interrupt-controller;
-			interrupts = <1 9 0xf04>;
-			reg = <0xfff11000 0x1000>,
-			      <0xfff12000 0x1000>,
-			      <0xfff14000 0x2000>,
-			      <0xfff16000 0x2000>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
-		};
-	};
-};
-
-/include/ "ecx-common.dtsi"
diff --git a/src/arm/ecx-common.dtsi b/src/arm/ecx-common.dtsi
deleted file mode 100644
index b90045a8f8e3..000000000000
--- a/src/arm/ecx-common.dtsi
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/ {
-	chosen {
-		bootargs = "console=ttyAMA0";
-	};
-
-	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000002>;
-		cpu_off		= <0x84000004>;
-		cpu_on		= <0x84000006>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-
-		sata@ffe08000 {
-			compatible = "calxeda,hb-ahci";
-			reg = <0xffe08000 0x10000>;
-			interrupts = <0 83 4>;
-			dma-coherent;
-			calxeda,port-phys = <&combophy5 0 &combophy0 0
-					     &combophy0 1 &combophy0 2
-					     &combophy0 3>;
-			calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
-			calxeda,led-order = <4 0 1 2 3>;
-		};
-
-		sdhci@ffe0e000 {
-			compatible = "calxeda,hb-sdhci";
-			reg = <0xffe0e000 0x1000>;
-			interrupts = <0 90 4>;
-			clocks = <&eclk>;
-			status = "disabled";
-		};
-
-		ipc@fff20000 {
-			compatible = "arm,pl320", "arm,primecell";
-			reg = <0xfff20000 0x1000>;
-			interrupts = <0 7 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpioe: gpio@fff30000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff30000 0x1000>;
-			interrupts = <0 14 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpiof: gpio@fff31000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff31000 0x1000>;
-			interrupts = <0 15 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpiog: gpio@fff32000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff32000 0x1000>;
-			interrupts = <0 16 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpioh: gpio@fff33000 {
-			#gpio-cells = <2>;
-			compatible = "arm,pl061", "arm,primecell";
-			gpio-controller;
-			reg = <0xfff33000 0x1000>;
-			interrupts = <0 17 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		timer@fff34000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xfff34000 0x1000>;
-			interrupts = <0 18 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		rtc@fff35000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0xfff35000 0x1000>;
-			interrupts = <0 19 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		serial@fff36000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xfff36000 0x1000>;
-			interrupts = <0 20 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		smic@fff3a000 {
-			compatible = "ipmi-smic";
-			device_type = "ipmi";
-			reg = <0xfff3a000 0x1000>;
-			interrupts = <0 24 4>;
-			reg-size = <4>;
-			reg-spacing = <4>;
-		};
-
-		sregs@fff3c000 {
-			compatible = "calxeda,hb-sregs";
-			reg = <0xfff3c000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				osc: oscillator {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <33333000>;
-				};
-
-				ddrpll: ddrpll {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-pll-clock";
-					clocks = <&osc>;
-					reg = <0x108>;
-				};
-
-				a9pll: a9pll {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-pll-clock";
-					clocks = <&osc>;
-					reg = <0x100>;
-				};
-
-				a9periphclk: a9periphclk {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-a9periph-clock";
-					clocks = <&a9pll>;
-					reg = <0x104>;
-				};
-
-				a9bclk: a9bclk {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-a9bus-clock";
-					clocks = <&a9pll>;
-					reg = <0x104>;
-				};
-
-				emmcpll: emmcpll {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-pll-clock";
-					clocks = <&osc>;
-					reg = <0x10C>;
-				};
-
-				eclk: eclk {
-					#clock-cells = <0>;
-					compatible = "calxeda,hb-emmc-clock";
-					clocks = <&emmcpll>;
-					reg = <0x114>;
-				};
-
-				pclk: pclk {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <150000000>;
-				};
-			};
-		};
-
-		dma@fff3d000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0xfff3d000 0x1000>;
-			interrupts = <0 92 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		ethernet@fff50000 {
-			compatible = "calxeda,hb-xgmac";
-			reg = <0xfff50000 0x1000>;
-			interrupts = <0 77 4  0 78 4  0 79 4>;
-			dma-coherent;
-		};
-
-		ethernet@fff51000 {
-			compatible = "calxeda,hb-xgmac";
-			reg = <0xfff51000 0x1000>;
-			interrupts = <0 80 4  0 81 4  0 82 4>;
-			dma-coherent;
-		};
-
-		combophy0: combo-phy@fff58000 {
-			compatible = "calxeda,hb-combophy";
-			#phy-cells = <1>;
-			reg = <0xfff58000 0x1000>;
-			phydev = <5>;
-		};
-
-		combophy5: combo-phy@fff5d000 {
-			compatible = "calxeda,hb-combophy";
-			#phy-cells = <1>;
-			reg = <0xfff5d000 0x1000>;
-			phydev = <31>;
-		};
-	};
-};
diff --git a/src/arm/efm32gg-dk3750.dts b/src/arm/efm32gg-dk3750.dts
deleted file mode 100644
index b4031fa4a567..000000000000
--- a/src/arm/efm32gg-dk3750.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Device tree for EFM32GG-DK3750 development board.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf
- */
-
-/dts-v1/;
-#include "efm32gg.dtsi"
-
-/ {
-	model = "Energy Micro Giant Gecko Development Kit";
-	compatible = "efm32,dk3750";
-
-	chosen {
-		bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
-	};
-
-	memory {
-		reg = <0x88000000 0x400000>;
-	};
-
-	soc {
-		adc@40002000 {
-			status = "ok";
-		};
-
-		i2c@4000a000 {
-			efm32,location = <3>;
-			status = "ok";
-
-			temp@48 {
-				compatible = "st,stds75";
-				reg = <0x48>;
-			};
-
-			eeprom@50 {
-				compatible = "microchip,24c02";
-				reg = <0x50>;
-				pagesize = <16>;
-			};
-		};
-
-		spi0: spi@4000c000 { /* USART0 */
-			cs-gpios = <&gpio 68 1>; // E4
-			location = <1>;
-			status = "ok";
-
-			microsd@0 {
-				compatible = "mmc-spi-slot";
-				spi-max-frequency = <100000>;
-				voltage-ranges = <3200 3400>;
-				broken-cd;
-				reg = <0>;
-			};
-		};
-
-		spi1: spi@4000c400 { /* USART1 */
-			cs-gpios = <&gpio 51 1>; // D3
-			location = <1>;
-			status = "ok";
-
-			ks8851@0 {
-				compatible = "ks8851";
-				spi-max-frequency = <6000000>;
-				reg = <0>;
-				interrupt-parent = <&boardfpga>;
-				interrupts = <4>;
-			};
-		};
-
-		uart4: uart@4000e400 { /* UART1 */
-			location = <2>;
-			status = "ok";
-		};
-
-		boardfpga: boardfpga {
-			compatible = "efm32board";
-			reg = <0x80000000 0x400>;
-			irq-gpios = <&gpio 64 1>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			status = "ok";
-		};
-	};
-};
diff --git a/src/arm/efm32gg.dtsi b/src/arm/efm32gg.dtsi
deleted file mode 100644
index 106d505c5d3d..000000000000
--- a/src/arm/efm32gg.dtsi
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Device tree for Energy Micro EFM32 Giant Gecko SoC.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
- */
-#include "armv7-m.dtsi"
-#include "dt-bindings/clock/efm32-cmu.h"
-
-/ {
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		spi2 = &spi2;
-	};
-
-	soc {
-		adc: adc@40002000 {
-			compatible = "efm32,adc";
-			reg = <0x40002000 0x400>;
-			interrupts = <7>;
-			clocks = <&cmu clk_HFPERCLKADC0>;
-			status = "disabled";
-		};
-
-		gpio: gpio@40006000 {
-			compatible = "efm32,gpio";
-			reg = <0x40006000 0x1000>;
-			interrupts = <1 11>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			clocks = <&cmu clk_HFPERCLKGPIO>;
-			status = "ok";
-		};
-
-		i2c0: i2c@4000a000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,i2c";
-			reg = <0x4000a000 0x400>;
-			interrupts = <9>;
-			clocks = <&cmu clk_HFPERCLKI2C0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4000a400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,i2c";
-			reg = <0x4000a400 0x400>;
-			interrupts = <10>;
-			clocks = <&cmu clk_HFPERCLKI2C1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		spi0: spi@4000c000 { /* USART0 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,spi";
-			reg = <0x4000c000 0x400>;
-			interrupts = <3 4>;
-			clocks = <&cmu clk_HFPERCLKUSART0>;
-			status = "disabled";
-		};
-
-		spi1: spi@4000c400 { /* USART1 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,spi";
-			reg = <0x4000c400 0x400>;
-			interrupts = <15 16>;
-			clocks = <&cmu clk_HFPERCLKUSART1>;
-			status = "disabled";
-		};
-
-		spi2: spi@4000c800 { /* USART2 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,spi";
-			reg = <0x4000c800 0x400>;
-			interrupts = <18 19>;
-			clocks = <&cmu clk_HFPERCLKUSART2>;
-			status = "disabled";
-		};
-
-		uart0: uart@4000c000 { /* USART0 */
-			compatible = "efm32,uart";
-			reg = <0x4000c000 0x400>;
-			interrupts = <3 4>;
-			clocks = <&cmu clk_HFPERCLKUSART0>;
-			status = "disabled";
-		};
-
-		uart1: uart@4000c400 { /* USART1 */
-			compatible = "efm32,uart";
-			reg = <0x4000c400 0x400>;
-			interrupts = <15 16>;
-			clocks = <&cmu clk_HFPERCLKUSART1>;
-			status = "disabled";
-		};
-
-		uart2: uart@4000c800 { /* USART2 */
-			compatible = "efm32,uart";
-			reg = <0x4000c800 0x400>;
-			interrupts = <18 19>;
-			clocks = <&cmu clk_HFPERCLKUSART2>;
-			status = "disabled";
-		};
-
-		uart3: uart@4000e000 { /* UART0 */
-			compatible = "efm32,uart";
-			reg = <0x4000e000 0x400>;
-			interrupts = <20 21>;
-			clocks = <&cmu clk_HFPERCLKUART0>;
-			status = "disabled";
-		};
-
-		uart4: uart@4000e400 { /* UART1 */
-			compatible = "efm32,uart";
-			reg = <0x4000e400 0x400>;
-			interrupts = <22 23>;
-			clocks = <&cmu clk_HFPERCLKUART1>;
-			status = "disabled";
-		};
-
-		timer0: timer@40010000 {
-			compatible = "efm32,timer";
-			reg = <0x40010000 0x400>;
-			interrupts = <2>;
-			clocks = <&cmu clk_HFPERCLKTIMER0>;
-		};
-
-		timer1: timer@40010400 {
-			compatible = "efm32,timer";
-			reg = <0x40010400 0x400>;
-			interrupts = <12>;
-			clocks = <&cmu clk_HFPERCLKTIMER1>;
-		};
-
-		timer2: timer@40010800 {
-			compatible = "efm32,timer";
-			reg = <0x40010800 0x400>;
-			interrupts = <13>;
-			clocks = <&cmu clk_HFPERCLKTIMER2>;
-		};
-
-		timer3: timer@40010c00 {
-			compatible = "efm32,timer";
-			reg = <0x40010c00 0x400>;
-			interrupts = <14>;
-			clocks = <&cmu clk_HFPERCLKTIMER3>;
-		};
-
-		cmu: cmu@400c8000 {
-			compatible = "efm32gg,cmu";
-			reg = <0x400c8000 0x400>;
-			interrupts = <32>;
-			#clock-cells = <1>;
-		};
-	};
-};
diff --git a/src/arm/elpida_ecb240abacn.dtsi b/src/arm/elpida_ecb240abacn.dtsi
deleted file mode 100644
index f97f70f83374..000000000000
--- a/src/arm/elpida_ecb240abacn.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Common devices used in different OMAP boards
- */
-
-/ {
-	elpida_ECB240ABACN: lpddr2 {
-		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
-		density		= <2048>;
-		io-width	= <32>;
-
-		tRPab-min-tck	= <3>;
-		tRCD-min-tck	= <3>;
-		tWR-min-tck	= <3>;
-		tRASmin-min-tck	= <3>;
-		tRRD-min-tck	= <2>;
-		tWTR-min-tck	= <2>;
-		tXP-min-tck	= <2>;
-		tRTP-min-tck	= <2>;
-		tCKE-min-tck	= <3>;
-		tCKESR-min-tck	= <3>;
-		tFAW-min-tck	= <8>;
-
-		timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
-			compatible	= "jedec,lpddr2-timings";
-			min-freq	= <10000000>;
-			max-freq	= <400000000>;
-			tRPab		= <21000>;
-			tRCD		= <18000>;
-			tWR		= <15000>;
-			tRAS-min	= <42000>;
-			tRRD		= <10000>;
-			tWTR		= <7500>;
-			tXP		= <7500>;
-			tRTP		= <7500>;
-			tCKESR		= <15000>;
-			tDQSCK-max	= <5500>;
-			tFAW		= <50000>;
-			tZQCS		= <90000>;
-			tZQCL		= <360000>;
-			tZQinit		= <1000000>;
-			tRAS-max-ns	= <70000>;
-			tDQSCK-max-derated = <6000>;
-		};
-
-		timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
-			compatible	= "jedec,lpddr2-timings";
-			min-freq	= <10000000>;
-			max-freq	= <200000000>;
-			tRPab		= <21000>;
-			tRCD		= <18000>;
-			tWR		= <15000>;
-			tRAS-min	= <42000>;
-			tRRD		= <10000>;
-			tWTR		= <10000>;
-			tXP		= <7500>;
-			tRTP		= <7500>;
-			tCKESR		= <15000>;
-			tDQSCK-max	= <5500>;
-			tFAW		= <50000>;
-			tZQCS		= <90000>;
-			tZQCL		= <360000>;
-			tZQinit		= <1000000>;
-			tRAS-max-ns	= <70000>;
-			tDQSCK-max-derated = <6000>;
-		};
-	};
-};
diff --git a/src/arm/emev2-kzm9d.dts b/src/arm/emev2-kzm9d.dts
deleted file mode 100644
index 50ccd151091e..000000000000
--- a/src/arm/emev2-kzm9d.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Device Tree Source for the KZM9D board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-/dts-v1/;
-
-#include "emev2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "EMEV2 KZM9D Board";
-	compatible = "renesas,kzm9d", "renesas,emev2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
-	};
-
-	reg_1p8v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	lan9220@20000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x20000000 0x10000>;
-		phy-mode = "mii";
-		interrupt-parent = <&gpio0>;
-		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vddvario-supply = <&reg_1p8v>;
-		vdd33a-supply = <&reg_3p3v>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			label = "DSW2-1";
-			linux,code = <KEY_1>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			label = "DSW2-2";
-			linux,code = <KEY_2>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		button@3 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			label = "DSW2-3";
-			linux,code = <KEY_3>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-		button@4 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			label = "DSW2-4";
-			linux,code = <KEY_4>;
-			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/emev2.dtsi b/src/arm/emev2.dtsi
deleted file mode 100644
index 00eeed3721b6..000000000000
--- a/src/arm/emev2.dtsi
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * Device Tree Source for the EMEV2 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,emev2";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		gpio4 = &gpio4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <533000000>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			clock-frequency = <533000000>;
-		};
-	};
-
-	gic: interrupt-controller@e0020000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0xe0028000 0x1000>,
-		      <0xe0020000 0x0100>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	smu@e0110000 {
-		compatible = "renesas,emev2-smu";
-		reg = <0xe0110000 0x10000>;
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		c32ki: c32ki {
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			#clock-cells = <0>;
-		};
-		pll3_fo: pll3_fo {
-			compatible = "fixed-factor-clock";
-			clocks = <&c32ki>;
-			clock-div = <1>;
-			clock-mult = <7000>;
-			#clock-cells = <0>;
-		};
-		usia_u0_sclkdiv: usia_u0_sclkdiv {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x610 0>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usib_u1_sclkdiv: usib_u1_sclkdiv {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x65c 0>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usib_u2_sclkdiv: usib_u2_sclkdiv {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x65c 16>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usib_u3_sclkdiv: usib_u3_sclkdiv {
-			compatible = "renesas,emev2-smu-clkdiv";
-			reg = <0x660 0>;
-			clocks = <&pll3_fo>;
-			#clock-cells = <0>;
-		};
-		usia_u0_sclk: usia_u0_sclk {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4a0 1>;
-			clocks = <&usia_u0_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		usib_u1_sclk: usib_u1_sclk {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4b8 1>;
-			clocks = <&usib_u1_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		usib_u2_sclk: usib_u2_sclk {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4bc 1>;
-			clocks = <&usib_u2_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		usib_u3_sclk: usib_u3_sclk {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x4c0 1>;
-			clocks = <&usib_u3_sclkdiv>;
-			#clock-cells = <0>;
-		};
-		sti_sclk: sti_sclk {
-			compatible = "renesas,emev2-smu-gclk";
-			reg = <0x528 1>;
-			clocks = <&c32ki>;
-			#clock-cells = <0>;
-		};
-	};
-
-	sti@e0180000 {
-		compatible = "renesas,em-sti";
-		reg = <0xe0180000 0x54>;
-		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&sti_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart@e1020000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1020000 0x38>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usia_u0_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart@e1030000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1030000 0x38>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usib_u1_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart@e1040000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1040000 0x38>;
-		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usib_u2_sclk>;
-		clock-names = "sclk";
-	};
-
-	uart@e1050000 {
-		compatible = "renesas,em-uart";
-		reg = <0xe1050000 0x38>;
-		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usib_u3_sclk>;
-		clock-names = "sclk";
-	};
-
-	gpio0: gpio@e0050000 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 68 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-	gpio1: gpio@e0050080 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 70 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-	gpio2: gpio@e0050100 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
-		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 72 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-	gpio3: gpio@e0050180 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 74 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpios = <32>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-	gpio4: gpio@e0050200 {
-		compatible = "renesas,em-gio";
-		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 76 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		ngpios = <31>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/src/arm/exynos3250-pinctrl.dtsi b/src/arm/exynos3250-pinctrl.dtsi
deleted file mode 100644
index 47b92c150f4e..000000000000
--- a/src/arm/exynos3250-pinctrl.dtsi
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
- * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-&pinctrl_0 {
-	gpa0: gpa0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <0x2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c2_bus: i2c2-bus {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c3_bus: i2c3-bus {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c4_bus: i2c4-bus {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c5_bus: i2c5-bus {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pcm2_bus: pcm2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c6_bus: i2c6-bus {
-		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm0_out: pwm0-out {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm1_out: pwm1-out {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c7_bus: i2c7-bus {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm2_out: pwm2-out {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm3_out: pwm3-out {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	mipi0_clk: mipi0-clk {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c1_bus: i2c1-bus {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_1 {
-	gpe0: gpe0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe1: gpe1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe2: gpe2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpk0: gpk0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl0: gpl0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm0: gpm0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm1: gpm1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm2: gpm2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm3: gpm3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm4: gpm4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx0: gpx0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
-				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
-				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cd: sd0-cd {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_rdqs: sd0-rdqs {
-		samsung,pins = "gpk0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus1: sd0-bus-width1 {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus4: sd0-bus-width4 {
-		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus8: sd0-bus-width8 {
-		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpk1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpk1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cd: sd1-cd {
-		samsung,pins = "gpk1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pins = "gpk1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	cam_port_b_io: cam-port-b-io {
-		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	fimc_is_i2c0: fimc-is-i2c0 {
-		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	fimc_is_i2c1: fimc-is-i2c1 {
-		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	fimc_is_uart: fimc-is-uart {
-		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
diff --git a/src/arm/exynos3250.dtsi b/src/arm/exynos3250.dtsi
deleted file mode 100644
index 1d52de6370d5..000000000000
--- a/src/arm/exynos3250.dtsi
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
- * Samsung's Exynos3250 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/exynos3250.h>
-
-/ {
-	compatible = "samsung,exynos3250";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		mshc0 = &mshc_0;
-		mshc1 = &mshc_1;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fixed-rate-clocks {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			xusbxti: clock@0 {
-				compatible = "fixed-clock";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xusbxti";
-			};
-
-			xxti: clock@1 {
-				compatible = "fixed-clock";
-				reg = <1>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xxti";
-			};
-
-			xtcxo: clock@2 {
-				compatible = "fixed-clock";
-				reg = <2>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xtcxo";
-			};
-		};
-
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x40000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@3f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x3f000 0x1000>;
-			};
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sys_reg: syscon@10010000 {
-			compatible = "samsung,exynos3-sysreg", "syscon";
-			reg = <0x10010000 0x400>;
-		};
-
-		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos3250-pmu", "syscon";
-			reg = <0x10020000 0x4000>;
-		};
-
-		pd_cam: cam-power-domain@10023C00 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
-		};
-
-		pd_mfc: mfc-power-domain@10023C40 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
-		};
-
-		pd_g3d: g3d-power-domain@10023C60 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
-		};
-
-		pd_lcd0: lcd0-power-domain@10023C80 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
-		};
-
-		pd_isp: isp-power-domain@10023CA0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
-		};
-
-		cmu: clock-controller@10030000 {
-			compatible = "samsung,exynos3250-cmu";
-			reg = <0x10030000 0x20000>;
-			#clock-cells = <1>;
-		};
-
-		rtc: rtc@10070000 {
-			compatible = "samsung,s3c6410-rtc";
-			reg = <0x10070000 0x100>;
-			interrupts = <0 73 0>, <0 74 0>;
-			status = "disabled";
-		};
-
-		tmu: tmu@100C0000 {
-			compatible = "samsung,exynos3250-tmu";
-			reg = <0x100C0000 0x100>;
-			interrupts = <0 216 0>;
-			clocks = <&cmu CLK_TMU_APBIF>;
-			clock-names = "tmu_apbif";
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-			      <0x10482000 0x1000>,
-			      <0x10484000 0x2000>,
-			      <0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		mct@10050000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x10050000 0x800>;
-			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
-				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
-			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos3250-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <0 225 0>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupts = <0 48 0>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos3250-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <0 240 0>;
-		};
-
-		mshc_0: mshc@12510000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12510000 0x1000>;
-			interrupts = <0 142 0>;
-			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mshc_1: mshc@12520000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12520000 0x1000>;
-			interrupts = <0 143 0>;
-			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		amba {
-			compatible = "arm,amba-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@12680000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12680000 0x1000>;
-				interrupts = <0 138 0>;
-				clocks = <&cmu CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@12690000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12690000 0x1000>;
-				interrupts = <0 139 0>;
-				clocks = <&cmu CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-		};
-
-		adc: adc@126C0000 {
-			compatible = "samsung,exynos3250-adc",
-				     "samsung,exynos-adc-v2";
-			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
-			interrupts = <0 137 0>;
-			clock-names = "adc", "sclk";
-			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
-			#io-channel-cells = <1>;
-			io-channel-ranges;
-			status = "disabled";
-		};
-
-		serial_0: serial@13800000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13800000 0x100>;
-			interrupts = <0 109 0>;
-			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_data &uart0_fctl>;
-			status = "disabled";
-		};
-
-		serial_1: serial@13810000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13810000 0x100>;
-			interrupts = <0 110 0>;
-			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_data>;
-			status = "disabled";
-		};
-
-		i2c_0: i2c@13860000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13860000 0x100>;
-			interrupts = <0 113 0>;
-			clocks = <&cmu CLK_I2C0>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_bus>;
-			status = "disabled";
-		};
-
-		i2c_1: i2c@13870000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13870000 0x100>;
-			interrupts = <0 114 0>;
-			clocks = <&cmu CLK_I2C1>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_bus>;
-			status = "disabled";
-		};
-
-		i2c_2: i2c@13880000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13880000 0x100>;
-			interrupts = <0 115 0>;
-			clocks = <&cmu CLK_I2C2>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_bus>;
-			status = "disabled";
-		};
-
-		i2c_3: i2c@13890000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13890000 0x100>;
-			interrupts = <0 116 0>;
-			clocks = <&cmu CLK_I2C3>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_bus>;
-			status = "disabled";
-		};
-
-		i2c_4: i2c@138A0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
-			interrupts = <0 117 0>;
-			clocks = <&cmu CLK_I2C4>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_bus>;
-			status = "disabled";
-		};
-
-		i2c_5: i2c@138B0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
-			interrupts = <0 118 0>;
-			clocks = <&cmu CLK_I2C5>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_bus>;
-			status = "disabled";
-		};
-
-		i2c_6: i2c@138C0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
-			interrupts = <0 119 0>;
-			clocks = <&cmu CLK_I2C6>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_bus>;
-			status = "disabled";
-		};
-
-		i2c_7: i2c@138D0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
-			interrupts = <0 120 0>;
-			clocks = <&cmu CLK_I2C7>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_bus>;
-			status = "disabled";
-		};
-
-		spi_0: spi@13920000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13920000 0x100>;
-			interrupts = <0 121 0>;
-			dmas = <&pdma0 7>, <&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			status = "disabled";
-		};
-
-		spi_1: spi@13930000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13930000 0x100>;
-			interrupts = <0 122 0>;
-			dmas = <&pdma1 7>, <&pdma1 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			status = "disabled";
-		};
-
-		i2s2: i2s@13970000 {
-			compatible = "samsung,s3c6410-i2s";
-			reg = <0x13970000 0x100>;
-			interrupts = <0 126 0>;
-			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0";
-			dmas = <&pdma0 14>, <&pdma0 13>;
-			dma-names = "tx", "rx";
-			pinctrl-0 = <&i2s2_bus>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		pwm: pwm@139D0000 {
-			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-				     <0 107 0>, <0 108 0>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupts = <0 18 0>, <0 19 0>;
-		};
-	};
-};
-
-#include "exynos3250-pinctrl.dtsi"
diff --git a/src/arm/exynos4.dtsi b/src/arm/exynos4.dtsi
deleted file mode 100644
index e0278ecbc816..000000000000
--- a/src/arm/exynos4.dtsi
+++ /dev/null
@@ -1,648 +0,0 @@
-/*
- * Samsung's Exynos4 SoC series common device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
- * SoCs from Exynos4 series can include this file and provide values for SoCs
- * specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/exynos4.h>
-#include <dt-bindings/clock/exynos-audss-clk.h>
-#include "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		csis0 = &csis_0;
-		csis1 = &csis_1;
-		fimc0 = &fimc_0;
-		fimc1 = &fimc_1;
-		fimc2 = &fimc_2;
-		fimc3 = &fimc_3;
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		serial2 = &serial_2;
-		serial3 = &serial_3;
-	};
-
-	clock_audss: clock-controller@03810000 {
-		compatible = "samsung,exynos4210-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-	};
-
-	i2s0: i2s@03830000 {
-		compatible = "samsung,s5pv210-i2s";
-		reg = <0x03830000 0x100>;
-		clocks = <&clock_audss EXYNOS_I2S_BUS>;
-		clock-names = "iis";
-		dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
-		dma-names = "tx", "rx", "tx-sec";
-		samsung,idma-addr = <0x03000000>;
-		status = "disabled";
-	};
-
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
-
-	mipi_phy: video-phy@10020710 {
-		compatible = "samsung,s5pv210-mipi-video-phy";
-		reg = <0x10020710 8>;
-		#phy-cells = <1>;
-	};
-
-	pd_mfc: mfc-power-domain@10023C40 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C40 0x20>;
-	};
-
-	pd_g3d: g3d-power-domain@10023C60 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C60 0x20>;
-	};
-
-	pd_lcd0: lcd0-power-domain@10023C80 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C80 0x20>;
-	};
-
-	pd_tv: tv-power-domain@10023C20 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C20 0x20>;
-	};
-
-	pd_cam: cam-power-domain@10023C00 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C00 0x20>;
-	};
-
-	pd_gps: gps-power-domain@10023CE0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CE0 0x20>;
-	};
-
-	pd_gps_alive: gps-alive-power-domain@10023D00 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023D00 0x20>;
-	};
-
-	gic: interrupt-controller@10490000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
-	};
-
-	combiner: interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0x10440000 0x1000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>, <3 2>;
-	};
-
-	sys_reg: syscon@10010000 {
-		compatible = "samsung,exynos4-sysreg", "syscon";
-		reg = <0x10010000 0x400>;
-	};
-
-	pmu_system_controller: system-controller@10020000 {
-		compatible = "samsung,exynos4210-pmu", "syscon";
-		reg = <0x10020000 0x4000>;
-	};
-
-	dsi_0: dsi@11C80000 {
-		compatible = "samsung,exynos4210-mipi-dsi";
-		reg = <0x11C80000 0x10000>;
-		interrupts = <0 79 0>;
-		samsung,power-domain = <&pd_lcd0>;
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
-		clock-names = "bus_clk", "pll_clk";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	camera {
-		compatible = "samsung,fimc", "simple-bus";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#clock-cells = <1>;
-		clock-output-names = "cam_a_clkout", "cam_b_clkout";
-		ranges;
-
-		fimc_0: fimc@11800000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11800000 0x1000>;
-			interrupts = <0 84 0>;
-			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
-			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		fimc_1: fimc@11810000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11810000 0x1000>;
-			interrupts = <0 85 0>;
-			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
-			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		fimc_2: fimc@11820000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11820000 0x1000>;
-			interrupts = <0 86 0>;
-			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
-			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		fimc_3: fimc@11830000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11830000 0x1000>;
-			interrupts = <0 87 0>;
-			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
-			clock-names = "fimc", "sclk_fimc";
-			samsung,power-domain = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			status = "disabled";
-		};
-
-		csis_0: csis@11880000 {
-			compatible = "samsung,exynos4210-csis";
-			reg = <0x11880000 0x4000>;
-			interrupts = <0 78 0>;
-			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
-			clock-names = "csis", "sclk_csis";
-			bus-width = <4>;
-			samsung,power-domain = <&pd_cam>;
-			phys = <&mipi_phy 0>;
-			phy-names = "csis";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		csis_1: csis@11890000 {
-			compatible = "samsung,exynos4210-csis";
-			reg = <0x11890000 0x4000>;
-			interrupts = <0 80 0>;
-			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
-			clock-names = "csis", "sclk_csis";
-			bus-width = <2>;
-			samsung,power-domain = <&pd_cam>;
-			phys = <&mipi_phy 2>;
-			phy-names = "csis";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	watchdog@10060000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 43 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		status = "disabled";
-	};
-
-	rtc@10070000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x10070000 0x100>;
-		interrupts = <0 44 0>, <0 45 0>;
-		clocks = <&clock CLK_RTC>;
-		clock-names = "rtc";
-		status = "disabled";
-	};
-
-	keypad@100A0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <0 109 0>;
-		clocks = <&clock CLK_KEYIF>;
-		clock-names = "keypad";
-		status = "disabled";
-	};
-
-	sdhci@12510000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12510000 0x100>;
-		interrupts = <0 73 0>;
-		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12520000 0x100>;
-		interrupts = <0 74 0>;
-		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12540000 0x100>;
-		interrupts = <0 76 0>;
-		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
-
-	exynos_usbphy: exynos-usbphy@125B0000 {
-		compatible = "samsung,exynos4210-usb2-phy";
-		reg = <0x125B0000 0x100>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-		clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		status = "disabled";
-	};
-
-	hsotg@12480000 {
-		compatible = "samsung,s3c6400-hsotg";
-		reg = <0x12480000 0x20000>;
-		interrupts = <0 71 0>;
-		clocks = <&clock CLK_USB_DEVICE>;
-		clock-names = "otg";
-		phys = <&exynos_usbphy 0>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	ehci@12580000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12580000 0x100>;
-		interrupts = <0 70 0>;
-		clocks = <&clock CLK_USB_HOST>;
-		clock-names = "usbhost";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-		    reg = <0>;
-		    phys = <&exynos_usbphy 1>;
-		    status = "disabled";
-		};
-		port@1 {
-		    reg = <1>;
-		    phys = <&exynos_usbphy 2>;
-		    status = "disabled";
-		};
-		port@2 {
-		    reg = <2>;
-		    phys = <&exynos_usbphy 3>;
-		    status = "disabled";
-		};
-	};
-
-	ohci@12590000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12590000 0x100>;
-		interrupts = <0 70 0>;
-		clocks = <&clock CLK_USB_HOST>;
-		clock-names = "usbhost";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-		    reg = <0>;
-		    phys = <&exynos_usbphy 1>;
-		    status = "disabled";
-		};
-	};
-
-	i2s1: i2s@13960000 {
-		compatible = "samsung,s5pv210-i2s";
-		reg = <0x13960000 0x100>;
-		clocks = <&clock CLK_I2S1>;
-		clock-names = "iis";
-		dmas = <&pdma1 12>, <&pdma1 11>;
-		dma-names = "tx", "rx";
-		status = "disabled";
-	};
-
-	i2s2: i2s@13970000 {
-		compatible = "samsung,s5pv210-i2s";
-		reg = <0x13970000 0x100>;
-		clocks = <&clock CLK_I2S2>;
-		clock-names = "iis";
-		dmas = <&pdma0 14>, <&pdma0 13>;
-		dma-names = "tx", "rx";
-		status = "disabled";
-	};
-
-	mfc: codec@13400000 {
-		compatible = "samsung,mfc-v5";
-		reg = <0x13400000 0x10000>;
-		interrupts = <0 94 0>;
-		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		status = "disabled";
-	};
-
-	serial_0: serial@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
-
-	serial_1: serial@13810000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13810000 0x100>;
-		interrupts = <0 53 0>;
-		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
-
-	serial_2: serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
-
-	serial_3: serial@13830000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13830000 0x100>;
-		interrupts = <0 55 0>;
-		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
-
-	i2c_0: i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13860000 0x100>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		status = "disabled";
-	};
-
-	i2c_1: i2c@13870000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <0 59 0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "disabled";
-	};
-
-	i2c_2: i2c@13880000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13880000 0x100>;
-		interrupts = <0 60 0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		status = "disabled";
-	};
-
-	i2c_3: i2c@13890000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13890000 0x100>;
-		interrupts = <0 61 0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		status = "disabled";
-	};
-
-	i2c_4: i2c@138A0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138A0000 0x100>;
-		interrupts = <0 62 0>;
-		clocks = <&clock CLK_I2C4>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_bus>;
-		status = "disabled";
-	};
-
-	i2c_5: i2c@138B0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138B0000 0x100>;
-		interrupts = <0 63 0>;
-		clocks = <&clock CLK_I2C5>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_bus>;
-		status = "disabled";
-	};
-
-	i2c_6: i2c@138C0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138C0000 0x100>;
-		interrupts = <0 64 0>;
-		clocks = <&clock CLK_I2C6>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_bus>;
-		status = "disabled";
-	};
-
-	i2c_7: i2c@138D0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138D0000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_I2C7>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_bus>;
-		status = "disabled";
-	};
-
-	spi_0: spi@13920000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13920000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 7>, <&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13930000 0x100>;
-		interrupts = <0 67 0>;
-		dmas = <&pdma1 7>, <&pdma1 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		status = "disabled";
-	};
-
-	spi_2: spi@13940000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13940000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 9>, <&pdma0 8>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-		status = "disabled";
-	};
-
-	pwm@139D0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x139D0000 0x1000>;
-		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@12680000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12680000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@12690000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12690000 0x1000>;
-			interrupts = <0 36 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma1: mdma@12850000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x12850000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_MDMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-	};
-
-	fimd: fimd@11c00000 {
-		compatible = "samsung,exynos4210-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x11c00000 0x20000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
-		clock-names = "sclk_fimd", "fimd";
-		samsung,power-domain = <&pd_lcd0>;
-		samsung,sysreg = <&sys_reg>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/exynos4210-origen.dts b/src/arm/exynos4210-origen.dts
deleted file mode 100644
index f767c425d0b5..000000000000
--- a/src/arm/exynos4210-origen.dts
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * Samsung's Exynos4210 based Origen board device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Device tree source file for Insignal's Origen board which is based on
- * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Insignal Origen evaluation board based on Exynos4210";
-	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x10000000
-		       0x50000000 0x10000000
-		       0x60000000 0x10000000
-		       0x70000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mmc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 0>;
-			enable-active-high;
-		};
-	};
-
-	watchdog@10060000 {
-		status = "okay";
-	};
-
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	tmu@100C0000 {
-		status = "okay";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-		pinctrl-names = "default";
-		vmmc-supply = <&mmc_reg>;
-		status = "okay";
-	};
-
-	sdhci@12510000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
-		pinctrl-names = "default";
-		vmmc-supply = <&mmc_reg>;
-		status = "okay";
-	};
-
-	g2d@12800000 {
-		status = "okay";
-	};
-
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	i2c@13860000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-
-		max8997_pmic@66 {
-			compatible = "maxim,max8997-pmic";
-			reg = <0x66>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <4 0>, <3 0>;
-
-			max8997,pmic-buck1-dvs-voltage = <1350000>;
-			max8997,pmic-buck2-dvs-voltage = <1100000>;
-			max8997,pmic-buck5-dvs-voltage = <1200000>;
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ABB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDD_ALIVE_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VMIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDD_RTC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD_AUD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt	= <3300000>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "DVDD_SWB_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt	= <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VDD_PLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt	= <1100000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD_AUD_3V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt	= <3000000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "AVDD18_SWB_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					regulator-always-on;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VDD_SWB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt	= <3300000>;
-					regulator-always-on;
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "VDD_MIF_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt	= <1200000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					/*
-					* HACK: The real name is VDD_ARM_1.2V,
-					* but exynos-cpufreq does not support
-					* DT-based regulator lookup yet.
-					*/
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt	= <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VDD_INT_1.1V";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt	= <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VDD_G3D_1.1V";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "VDDQ_M1M2_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "VDD_LCD_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		up {
-			label = "Up";
-			gpios = <&gpx2 0 1>;
-			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
-		};
-
-		down {
-			label = "Down";
-			gpios = <&gpx2 1 1>;
-			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpx1 7 1>;
-			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpx1 6 1>;
-			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
-		};
-
-		menu {
-			label = "Menu";
-			gpios = <&gpx1 5 1>;
-			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status {
-			gpios = <&gpx1 3 1>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <47500000>;
-			hactive = <1024>;
-			vactive = <600>;
-			hfront-porch = <64>;
-			hback-porch = <16>;
-			hsync-len = <48>;
-			vback-porch = <64>;
-			vfront-porch = <16>;
-			vsync-len = <3>;
-		};
-	};
-};
diff --git a/src/arm/exynos4210-pinctrl.dtsi b/src/arm/exynos4210-pinctrl.dtsi
deleted file mode 100644
index a7c212891674..000000000000
--- a/src/arm/exynos4210-pinctrl.dtsi
+++ /dev/null
@@ -1,847 +0,0 @@
-/*
- * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2011-2012 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb: gpb {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe2: gpe2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe3: gpe3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe4: gpe4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf2: gpf2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf3: gpf3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_a: uart-audio-a {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_b: uart-audio-b {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpb-6", "gpb-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_ctrl: lcd-ctrl {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_sync: lcd-sync {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_en: lcd-en {
-			samsung,pins = "gpe3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_clk: lcd-clk {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data16: lcd-data-width16 {
-			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data18: lcd-data-width18 {
-			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data24: lcd-data-width24 {
-			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@11000000 {
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj1: gpj1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk0: gpk0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk1: gpk1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk2: gpk2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk3: gpk3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl0: gpl0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl1: gpl1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl2: gpl2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_clk: sd4-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cmd: sd4-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cd: sd4-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus1: sd4-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus4: sd4-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <4>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		eint0: ext-int0 {
-			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint8: ext-int8 {
-			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint15: ext-int15 {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint16: ext-int16 {
-			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint31: ext-int31 {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_io: cam-port-a-io {
-			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_clk_active: cam-port-a-clk-active {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_a_clk_idle: cam-port-a-clk-idle {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm0_bus: pcm0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-};
diff --git a/src/arm/exynos4210-smdkv310.dts b/src/arm/exynos4210-smdkv310.dts
deleted file mode 100644
index 676e6e0c8cf3..000000000000
--- a/src/arm/exynos4210-smdkv310.dts
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Samsung's Exynos4210 based SMDKV310 board device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Device tree source file for Samsung's SMDKV310 board which is based on
- * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-
-/ {
-	model = "Samsung smdkv310 evaluation board based on Exynos4210";
-	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		status = "okay";
-	};
-
-	g2d@12800000 {
-		status = "okay";
-	};
-
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	pinctrl@11000000 {
-		keypad_rows: keypad-rows {
-			samsung,pins = "gpx2-0", "gpx2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_cols: keypad-cols {
-			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
-				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	keypad@100A0000 {
-		samsung,keypad-num-rows = <2>;
-		samsung,keypad-num-columns = <8>;
-		linux,keypad-no-autorepeat;
-		linux,keypad-wakeup;
-		pinctrl-names = "default";
-		pinctrl-0 = <&keypad_rows &keypad_cols>;
-		status = "okay";
-
-		key_1 {
-			keypad,row = <0>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
-
-		key_2 {
-			keypad,row = <0>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
-
-		key_3 {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
-
-		key_4 {
-			keypad,row = <0>;
-			keypad,column = <6>;
-			linux,code = <5>;
-		};
-
-		key_5 {
-			keypad,row = <0>;
-			keypad,column = <7>;
-			linux,code = <6>;
-		};
-
-		key_a {
-			keypad,row = <1>;
-			keypad,column = <3>;
-			linux,code = <30>;
-		};
-
-		key_b {
-			keypad,row = <1>;
-			keypad,column = <4>;
-			linux,code = <48>;
-		};
-
-		key_c {
-			keypad,row = <1>;
-			keypad,column = <5>;
-			linux,code = <46>;
-		};
-
-		key_d {
-			keypad,row = <1>;
-			keypad,column = <6>;
-			linux,code = <32>;
-		};
-
-		key_e {
-			keypad,row = <1>;
-			keypad,column = <7>;
-			linux,code = <18>;
-		};
-	};
-
-	i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <100000>;
-		status = "okay";
-
-		eeprom@50 {
-			compatible = "samsung,24ad0xd1";
-			reg = <0x50>;
-		};
-
-		eeprom@52 {
-			compatible = "samsung,24ad0xd1";
-			reg = <0x52>;
-		};
-	};
-
-	spi_2: spi@13940000 {
-		cs-gpios = <&gpc1 2 0>;
-		status = "okay";
-
-		w25x80@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "w25x80";
-			reg = <0>;
-			spi-max-frequency = <1000000>;
-
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
-			};
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "Kernel";
-				reg = <0x40000 0xc0000>;
-			};
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <12000000>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
diff --git a/src/arm/exynos4210-trats.dts b/src/arm/exynos4210-trats.dts
deleted file mode 100644
index f516da9e8b3a..000000000000
--- a/src/arm/exynos4210-trats.dts
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * Samsung's Exynos4210 based Trats board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats board which is based on
- * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-
-/ {
-	model = "Samsung Trats based on Exynos4210";
-	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
-
-	memory {
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		vemmc_reg: regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 0>;
-			enable-active-high;
-		};
-
-		tsp_reg: regulator-1 {
-			compatible = "regulator-fixed";
-			regulator-name = "TSP_FIXED_VOLTAGES";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpl0 3 0>;
-			enable-active-high;
-		};
-
-		cam_af_28v_reg: regulator-2 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_AF_2.8V_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk1 1 0>;
-			enable-active-high;
-		};
-
-		cam_io_en_reg: regulator-3 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_IO_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpe2 1 0>;
-			enable-active-high;
-		};
-
-		cam_io_12v_reg: regulator-4 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_1.2V_EN";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpe2 5 0>;
-			enable-active-high;
-		};
-
-		vt_core_15v_reg: regulator-5 {
-			compatible = "regulator-fixed";
-			regulator-name = "VT_CORE_1.5V";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&gpe2 2 0>;
-			enable-active-high;
-		};
-	};
-
-	hsotg@12480000 {
-		vusb_d-supply = <&vusb_reg>;
-		vusb_a-supply = <&vusbdac_reg>;
-		status = "okay";
-	};
-
-	sdhci_emmc: sdhci@12510000 {
-		bus-width = <8>;
-		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&vemmc_reg>;
-		status = "okay";
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-down-key {
-			gpios = <&gpx2 1 1>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		vol-up-key {
-			gpios = <&gpx2 0 1>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 1>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 1>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <10>;
-		};
-	};
-
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <400000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		mms114-touchscreen@48 {
-			compatible = "melfas,mms114";
-			reg = <0x48>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <4 2>;
-			x-size = <720>;
-			y-size = <1280>;
-			avdd-supply = <&tsp_reg>;
-			vdd-supply = <&tsp_reg>;
-		};
-	};
-
-	i2c@138B0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c5_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		max8997_pmic@66 {
-			compatible = "maxim,max8997-pmic";
-
-			reg = <0x66>;
-
-			max8997,pmic-buck1-uses-gpio-dvs;
-			max8997,pmic-buck2-uses-gpio-dvs;
-			max8997,pmic-buck5-uses-gpio-dvs;
-
-			max8997,pmic-ignore-gpiodvs-side-effect;
-			max8997,pmic-buck125-default-dvs-idx = <0>;
-
-			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
-						         <&gpx0 6 0>,
-							 <&gpl0 0 0>;
-
-			max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
-							 <1250000>, <1200000>,
-							 <1150000>, <1100000>,
-							 <1000000>, <950000>;
-
-			max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
-							 <950000>,  <900000>,
-							 <1100000>, <1000000>,
-							 <950000>,  <900000>;
-
-			max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>;
-
-			regulators {
-				valive_reg: LDO2 {
-				     regulator-name = "VALIVE_1.1V_C210";
-				     regulator-min-microvolt = <1100000>;
-				     regulator-max-microvolt = <1100000>;
-				     regulator-always-on;
-				};
-
-				vusb_reg: LDO3 {
-				     regulator-name = "VUSB_1.1V_C210";
-				     regulator-min-microvolt = <1100000>;
-				     regulator-max-microvolt = <1100000>;
-				};
-
-				vmipi_reg: LDO4 {
-				     regulator-name = "VMIPI_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vpda_reg: LDO6 {
-				     regulator-name = "VCC_1.8V_PDA";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				     regulator-always-on;
-				};
-
-				vcam_reg: LDO7 {
-				     regulator-name = "CAM_ISP_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vusbdac_reg: LDO8 {
-				     regulator-name = "VUSB/VDAC_3.3V_C210";
-				     regulator-min-microvolt = <3300000>;
-				     regulator-max-microvolt = <3300000>;
-				};
-
-				vccpda_reg: LDO9 {
-				     regulator-name = "VCC_2.8V_PDA";
-				     regulator-min-microvolt = <2800000>;
-				     regulator-max-microvolt = <2800000>;
-				     regulator-always-on;
-				};
-
-				vpll_reg: LDO10 {
-				     regulator-name = "VPLL_1.1V_C210";
-				     regulator-min-microvolt = <1100000>;
-				     regulator-max-microvolt = <1100000>;
-				     regulator-always-on;
-				};
-
-				vtcam_reg: LDO12 {
-				     regulator-name = "VT_CAM_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vcclcd_reg: LDO13 {
-				     regulator-name = "VCC_3.3V_LCD";
-				     regulator-min-microvolt = <3300000>;
-				     regulator-max-microvolt = <3300000>;
-				};
-
-				vlcd_reg: LDO15 {
-				     regulator-name = "VLCD_2.2V";
-				     regulator-min-microvolt = <2200000>;
-				     regulator-max-microvolt = <2200000>;
-				};
-
-				camsensor_reg: LDO16 {
-				     regulator-name = "CAM_SENSOR_IO_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vddq_reg: LDO21 {
-				     regulator-name = "VDDQ_M1M2_1.2V";
-				     regulator-min-microvolt = <1200000>;
-				     regulator-max-microvolt = <1200000>;
-				     regulator-always-on;
-				};
-
-				varm_breg: BUCK1 {
-				     /*
-				      * HACK: The real name is VARM_1.2V_C210,
-				      * but exynos-cpufreq does not support
-				      * DT-based regulator lookup yet.
-				      */
-				     regulator-name = "vdd_arm";
-				     regulator-min-microvolt = <900000>;
-				     regulator-max-microvolt = <1350000>;
-				     regulator-always-on;
-				};
-
-				vint_breg: BUCK2 {
-				     regulator-name = "VINT_1.1V_C210";
-				     regulator-min-microvolt = <900000>;
-				     regulator-max-microvolt = <1100000>;
-				     regulator-always-on;
-				};
-
-				camisp_breg: BUCK4 {
-				     regulator-name = "CAM_ISP_CORE_1.2V";
-				     regulator-min-microvolt = <1200000>;
-				     regulator-max-microvolt = <1200000>;
-				};
-
-				vmem_breg: BUCK5 {
-				     regulator-name = "VMEM_1.2V_C210";
-				     regulator-min-microvolt = <1200000>;
-				     regulator-max-microvolt = <1200000>;
-				     regulator-always-on;
-				};
-
-				vccsub_breg: BUCK7 {
-				     regulator-name = "VCC_SUB_2.0V";
-				     regulator-min-microvolt = <2000000>;
-				     regulator-max-microvolt = <2000000>;
-				     regulator-always-on;
-				};
-
-				safe1_sreg: ESAFEOUT1 {
-				     regulator-name = "SAFEOUT1";
-				     regulator-always-on;
-				};
-
-				safe2_sreg: ESAFEOUT2 {
-				     regulator-name = "SAFEOUT2";
-				     regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	dsi_0: dsi@11C80000 {
-		vddcore-supply = <&vusb_reg>;
-		vddio-supply = <&vmipi_reg>;
-		samsung,pll-clock-frequency = <24000000>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				dsi_out: endpoint {
-					remote-endpoint = <&dsi_in>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-				};
-			};
-		};
-
-		panel@0 {
-			reg = <0>;
-			compatible = "samsung,s6e8aa0";
-			vdd3-supply = <&vcclcd_reg>;
-			vci-supply = <&vlcd_reg>;
-			reset-gpios = <&gpy4 5 0>;
-			power-on-delay= <50>;
-			reset-delay = <100>;
-			init-delay = <100>;
-			flip-horizontal;
-			flip-vertical;
-			panel-width-mm = <58>;
-			panel-height-mm = <103>;
-
-			display-timings {
-				timing-0 {
-					clock-frequency = <57153600>;
-					hactive = <720>;
-					vactive = <1280>;
-					hfront-porch = <5>;
-					hback-porch = <5>;
-					hsync-len = <5>;
-					vfront-porch = <13>;
-					vback-porch = <1>;
-					vsync-len = <2>;
-				};
-			};
-
-			port {
-				dsi_in: endpoint {
-					remote-endpoint = <&dsi_out>;
-				};
-			};
-		};
-	};
-
-	fimd@11c00000 {
-		status = "okay";
-	};
-
-	camera {
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-		status = "okay";
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/exynos4210-universal_c210.dts b/src/arm/exynos4210-universal_c210.dts
deleted file mode 100644
index d50eb3aa708e..000000000000
--- a/src/arm/exynos4210-universal_c210.dts
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- * Samsung's Exynos4210 based Universal C210 board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Universal C210 board which is based on
- * Samsung's Exynos4210 rev0 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-
-/ {
-	model = "Samsung Universal C210 based on Exynos4210 rev0";
-	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
-
-	memory {
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
-	};
-
-	sysram@02020000 {
-		smp-sysram@0 {
-			status = "disabled";
-		};
-
-		smp-sysram@5000 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x5000 0x1000>;
-		};
-
-		smp-sysram@1f000 {
-			status = "disabled";
-		};
-	};
-
-	mct@10050000 {
-		compatible = "none";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	vemmc_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2_8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe1 3 0>;
-		enable-active-high;
-	};
-
-	hsotg@12480000 {
-		vusb_d-supply = <&ldo3_reg>;
-		vusb_a-supply = <&ldo8_reg>;
-		status = "okay";
-	};
-
-	sdhci_emmc: sdhci@12510000 {
-		bus-width = <8>;
-		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&vemmc_reg>;
-		status = "okay";
-	};
-
-	sdhci_sd: sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo5_reg>;
-		cd-gpios = <&gpx3 4 0>;
-		cd-inverted;
-		status = "okay";
-	};
-
-	ehci@12580000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	ohci@12590000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-up-key {
-			gpios = <&gpx2 0 1>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <1>;
-		};
-
-		vol-down-key {
-			gpios = <&gpx2 1 1>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <1>;
-		};
-
-		config-key {
-			gpios = <&gpx2 2 1>;
-			linux,code = <171>;
-			label = "config";
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-
-		camera-key {
-			gpios = <&gpx2 3 1>;
-			linux,code = <212>;
-			label = "camera";
-			debounce-interval = <1>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 1>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 1>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <1>;
-		};
-	};
-
-	tsp_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "TSP_2_8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 3 0>;
-		enable-active-high;
-	};
-
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		tsp@4a {
-			/* TBD: Atmel maXtouch touchscreen */
-			reg = <0x4a>;
-		};
-	};
-
-	i2c@138B0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c5_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		vdd_arm_reg: pmic@60 {
-			compatible = "maxim,max8952";
-			reg = <0x60>;
-
-			max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
-			max8952,default-mode = <0>;
-			max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-							<1050000>, <950000>;
-			max8952,sync-freq = <0>;
-			max8952,ramp-speed = <0>;
-
-			regulator-name = "vdd_arm";
-			regulator-min-microvolt = <770000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pmic@66 {
-			compatible = "national,lp3974";
-			reg = <0x66>;
-
-			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
-							<&gpx0 6 0>;
-			max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
-							<1100000>, <1000000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
-			max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB+MIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "LDO6";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VLCD+VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB+VDAC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_AF_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "PS_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VHIC_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "CAM_I_HOST_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "CAM_S_ANA_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VCC_3.0V_LCD";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "VINT_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VG3D_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "VMEM_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ap32khz_reg: EN32KHz-AP {
-					regulator-name = "32KHz AP";
-					regulator-always-on;
-				};
-
-				cp32khz_reg: EN32KHz-CP {
-					regulator-name = "32KHz CP";
-				};
-
-				vichg_reg: ENVICHG {
-					regulator-name = "VICHG";
-				};
-
-				safeout1_reg: ESAFEOUT1 {
-					regulator-name = "SAFEOUT1";
-					regulator-always-on;
-				};
-
-				safeout2_reg: ESAFEOUT2 {
-					regulator-name = "SAFEOUT2";
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	spi-lcd {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-sck = <&gpy3 1 0>;
-		gpio-mosi = <&gpy3 3 0>;
-		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 0>;
-
-		lcd@0 {
-			compatible = "samsung,ld9040";
-			reg = <0>;
-			vdd3-supply = <&ldo7_reg>;
-			vci-supply = <&ldo17_reg>;
-			reset-gpios = <&gpy4 5 0>;
-			spi-max-frequency = <1200000>;
-			spi-cpol;
-			spi-cpha;
-			power-on-delay = <10>;
-			reset-delay = <10>;
-			panel-width-mm = <90>;
-			panel-height-mm = <154>;
-			display-timings {
-				timing {
-					clock-frequency = <23492370>;
-					hactive = <480>;
-					vactive = <800>;
-					hback-porch = <16>;
-					hfront-porch = <16>;
-					vback-porch = <2>;
-					vfront-porch = <28>;
-					hsync-len = <2>;
-					vsync-len = <1>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <0>;
-					pixelclk-active = <0>;
-				};
-			};
-			port {
-				lcd_ep: endpoint {
-					remote-endpoint = <&fimd_dpi_ep>;
-				};
-			};
-		};
-	};
-
-	fimd: fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
-		pinctrl-names = "default";
-		status = "okay";
-		samsung,invert-vden;
-		samsung,invert-vclk;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@3 {
-			reg = <3>;
-			fimd_dpi_ep: endpoint {
-				remote-endpoint = <&lcd_ep>;
-			};
-		};
-	};
-
-	pwm@139D0000 {
-		compatible = "samsung,s5p6440-pwm";
-		status = "okay";
-	};
-
-	camera {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-		};
-	};
-};
-
-&mdma1 {
-	reg = <0x12840000 0x1000>;
-};
diff --git a/src/arm/exynos4210.dtsi b/src/arm/exynos4210.dtsi
deleted file mode 100644
index 807bb5bf91fc..000000000000
--- a/src/arm/exynos4210.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Samsung's Exynos4210 SoC device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4.dtsi"
-#include "exynos4210-pinctrl.dtsi"
-
-/ {
-	compatible = "samsung,exynos4210", "samsung,exynos4";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-	};
-
-	pmu_system_controller: system-controller@10020000 {
-		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-				"clkout4", "clkout8", "clkout9";
-		clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-			<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-			<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
-			<&clock CLK_XUSBXTI>;
-		#clock-cells = <1>;
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x20000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x20000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@1f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x1f000 0x1000>;
-		};
-	};
-
-	pd_lcd1: lcd1-power-domain@10023CA0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CA0 0x20>;
-	};
-
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x8000>;
-	};
-
-	combiner: interrupt-controller@10440000 {
-		samsung,combiner-nr = <16>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
-	};
-
-	mct@10050000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x10050000 0x800>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 0>,
-					<1 &gic 0 69 0>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 0 42 0>,
-					<5 &gic 0 48 0>;
-		};
-	};
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4210-clock";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
-
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x03860000 0x1000>;
-	};
-
-	tmu@100C0000 {
-		compatible = "samsung,exynos4210-tmu";
-		interrupt-parent = <&combiner>;
-		reg = <0x100C0000 0x100>;
-		interrupts = <2 4>;
-		clocks = <&clock CLK_TMU_APBIF>;
-		clock-names = "tmu_apbif";
-		status = "disabled";
-	};
-
-	g2d@12800000 {
-		compatible = "samsung,s5pv210-g2d";
-		reg = <0x12800000 0x1000>;
-		interrupts = <0 89 0>;
-		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-		clock-names = "sclk_fimg2d", "fimg2d";
-		status = "disabled";
-	};
-
-	camera {
-		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-		fimc_0: fimc@11800000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,cam-if;
-		};
-
-		fimc_1: fimc@11810000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,cam-if;
-		};
-
-		fimc_2: fimc@11820000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,lcd-wb;
-		};
-
-		fimc_3: fimc@11830000 {
-			samsung,pix-limits = <1920 8192 1366 1920>;
-			samsung,rotators = <0>;
-			samsung,mainscaler-ext;
-			samsung,lcd-wb;
-		};
-	};
-};
diff --git a/src/arm/exynos4212.dtsi b/src/arm/exynos4212.dtsi
deleted file mode 100644
index 3c00e6ec9302..000000000000
--- a/src/arm/exynos4212.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Samsung's Exynos4212 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4x12.dtsi"
-
-/ {
-	compatible = "samsung,exynos4212", "samsung,exynos4";
-
-	combiner: interrupt-controller@10440000 {
-		samsung,combiner-nr = <18>;
-	};
-
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x8000>;
-	};
-};
diff --git a/src/arm/exynos4412-odroid-common.dtsi b/src/arm/exynos4412-odroid-common.dtsi
deleted file mode 100644
index adadaf97ac01..000000000000
--- a/src/arm/exynos4412-odroid-common.dtsi
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
- * device tree source
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/input/input.h>
-#include "exynos4412.dtsi"
-
-/ {
-	firmware@0204F000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_power_key>;
-
-		power_key {
-			interrupt-parent = <&gpx1>;
-			interrupts = <3 0>;
-			gpios = <&gpx1 3 1>;
-			linux,code = <KEY_POWER>;
-			label = "power key";
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	i2s0: i2s@03830000 {
-		pinctrl-0 = <&i2s0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			 <&clock_audss EXYNOS_DOUT_AUD_BUS>;
-		clock-names = "iis", "i2s_opclk0";
-	};
-
-	sound: sound {
-		compatible = "samsung,odroidx2-audio";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98090>;
-	};
-
-	mmc@12550000 {
-		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo20_reg &buck8_reg>;
-		status = "okay";
-
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	watchdog@10060000 {
-		status = "okay";
-	};
-
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	g2d@10800000 {
-		status = "okay";
-	};
-
-	camera {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-		};
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo4_reg &ldo21_reg>;
-		cd-gpios = <&gpk2 2 0>;
-		cd-inverted;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	i2c@13860000 {
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <400000>;
-		status = "okay";
-
-		usb3503: usb3503@08 {
-			compatible = "smsc,usb3503";
-			reg = <0x08>;
-
-			intn-gpios = <&gpx3 0 0>;
-			connect-gpios = <&gpx3 4 0>;
-			reset-gpios = <&gpx3 5 0>;
-			initial-mode = <1>;
-		};
-
-		max77686: pmic@09 {
-			compatible = "maxim,max77686";
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&max77686_irq>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			voltage-regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ALIVE_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDDQ_M1_2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VDDQ_EXT_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDDQ_MMC2_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VDDQ_MMC1_3_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VDD10_MPLL_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD10_XPLL_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD18_ABB1_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "VDD33_USB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VDDQ_C2C_W_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "VDD18_ABB0_2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "VDD10_HSIC_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VDD18_HSIC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo20_reg: LDO20 {
-					regulator-name = "LDO20_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "LDO21_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo25_reg: LDO25 {
-					regulator-name = "VDDQ_LCD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-microvolt-offset = <50000>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "VDDQ_CKEM1_2_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "BUCK6_1.35V";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "BUCK7_2.0V";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "BUCK8_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-			};
-		};
-	};
-
-	i2c@13870000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "okay";
-		max98090: max98090@10 {
-			compatible = "maxim,max98090";
-			reg = <0x10>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <0 0>;
-		};
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	hsotg@12480000 {
-		status = "okay";
-		vusb_d-supply = <&ldo15_reg>;
-		vusb_a-supply = <&ldo12_reg>;
-	};
-
-	ehci: ehci@12580000 {
-		status = "okay";
-	};
-};
-
-&pinctrl_1 {
-	gpio_power_key: power_key {
-		samsung,pins = "gpx1-3";
-		samsung,pin-pud = <0>;
-	};
-
-	max77686_irq: max77686-irq {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
diff --git a/src/arm/exynos4412-odroidu3.dts b/src/arm/exynos4412-odroidu3.dts
deleted file mode 100644
index c8a64be55d07..000000000000
--- a/src/arm/exynos4412-odroidu3.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
- *
- * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Device tree source file for Hardkernel's ODROID-U3 board which is based
- * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412-odroid-common.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-U3 board based on Exynos4412";
-	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x7FF00000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "led1:heart";
-			gpios = <&gpc1 0 1>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&usb3503 {
-	clock-names = "refclk";
-	clocks = <&pmu_system_controller 0>;
-	refclk-frequency = <24000000>;
-};
-
-&ehci {
-	port@1 {
-		status = "okay";
-	};
-	port@2 {
-		status = "okay";
-	};
-};
-
-&sound {
-	compatible = "samsung,odroidu3-audio";
-	samsung,model = "Odroid-U3";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"Headphone Jack", "MICBIAS",
-		"IN1", "Headphone Jack",
-		"Speakers", "SPKL",
-		"Speakers", "SPKR";
-};
diff --git a/src/arm/exynos4412-odroidx.dts b/src/arm/exynos4412-odroidx.dts
deleted file mode 100644
index cb1cfe7239c4..000000000000
--- a/src/arm/exynos4412-odroidx.dts
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Hardkernel's Exynos4412 based ODROID-X board device tree source
- *
- * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
- *
- * Device tree source file for Hardkernel's ODROID-X board which is based
- * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412-odroid-common.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-X board based on Exynos4412";
-	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x3FF00000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "led1:heart";
-			gpios = <&gpc1 0 1>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led2 {
-			label = "led2:mmc0";
-			gpios = <&gpc1 2 1>;
-			default-state = "on";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	gpio_keys {
-		pinctrl-0 = <&gpio_power_key &gpio_home_key>;
-
-		home_key {
-			interrupt-parent = <&gpx2>;
-			interrupts = <2 0>;
-			gpios = <&gpx2 2 0>;
-			linux,code = <KEY_HOME>;
-			label = "home key";
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	regulator_p3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "p3v3_en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpa1 1 1>;
-		enable-active-high;
-		regulator-always-on;
-	};
-};
-
-&ehci {
-	port@1 {
-		status = "okay";
-	};
-};
-
-&pinctrl_1 {
-	gpio_home_key: home_key {
-		samsung,pins = "gpx2-2";
-		samsung,pin-pud = <0>;
-	};
-};
diff --git a/src/arm/exynos4412-odroidx2.dts b/src/arm/exynos4412-odroidx2.dts
deleted file mode 100644
index 96b43f4497cc..000000000000
--- a/src/arm/exynos4412-odroidx2.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Hardkernel's Exynos4412 based ODROID-X2 board device tree source
- *
- * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
- *
- * Device tree source file for Hardkernel's ODROID-X2 board which is based
- * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4412-odroidx.dts"
-
-/ {
-	model = "Hardkernel ODROID-X2 board based on Exynos4412";
-	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x7FF00000>;
-	};
-};
-
-&sound {
-	samsung,model = "Odroid-X2";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"IN1", "Mic Jack",
-		"Mic Jack", "MICBIAS";
-};
diff --git a/src/arm/exynos4412-origen.dts b/src/arm/exynos4412-origen.dts
deleted file mode 100644
index e925c9fbfb07..000000000000
--- a/src/arm/exynos4412-origen.dts
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * Insignal's Exynos4412 based Origen board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Insignal's Origen board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Insignal Origen evaluation board based on Exynos4412";
-	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs ="console=ttySAC2,115200";
-	};
-
-	firmware@0203F000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mmc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 0>;
-			enable-active-high;
-		};
-	};
-
-	watchdog@10060000 {
-		status = "okay";
-	};
-
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	pinctrl@11000000 {
-		keypad_rows: keypad-rows {
-			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_cols: keypad-cols {
-			samsung,pins = "gpx1-0", "gpx1-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	keypad@100A0000 {
-		samsung,keypad-num-rows = <3>;
-		samsung,keypad-num-columns = <2>;
-		linux,keypad-no-autorepeat;
-		linux,keypad-wakeup;
-		pinctrl-0 = <&keypad_rows &keypad_cols>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		key_home {
-			keypad,row = <0>;
-			keypad,column = <0>;
-			linux,code = <KEY_HOME>;
-		};
-
-		key_down {
-			keypad,row = <0>;
-			keypad,column = <1>;
-			linux,code = <KEY_DOWN>;
-		};
-
-		key_up {
-			keypad,row = <1>;
-			keypad,column = <0>;
-			linux,code = <KEY_UP>;
-		};
-
-		key_menu {
-			keypad,row = <1>;
-			keypad,column = <1>;
-			linux,code = <KEY_MENU>;
-		};
-
-		key_back {
-			keypad,row = <2>;
-			keypad,column = <0>;
-			linux,code = <KEY_BACK>;
-		};
-
-		key_enter {
-			keypad,row = <2>;
-			keypad,column = <1>;
-			linux,code = <KEY_ENTER>;
-		};
-	};
-
-	g2d@10800000 {
-		status = "okay";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-		pinctrl-names = "default";
-		vmmc-supply = <&mmc_reg>;
-		status = "okay";
-	};
-
-	mmc@12550000 {
-		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
-	};
-
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <47500000>;
-			hactive = <1024>;
-			vactive = <600>;
-			hfront-porch = <64>;
-			hback-porch = <16>;
-			hsync-len = <48>;
-			vback-porch = <64>;
-			vfront-porch = <16>;
-			vsync-len = <3>;
-		};
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		s5m8767_pmic@66 {
-			compatible = "samsung,s5m8767-pmic";
-			reg = <0x66>;
-
-			s5m8767,pmic-buck-default-dvs-idx = <3>;
-
-			s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
-							 <&gpx2 4 0>,
-							 <&gpx2 5 0>;
-
-			s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
-							<&gpm3 6 0>,
-							<&gpm3 7 0>;
-
-			s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>;
-
-			s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
-							 <1100000>, <1100000>,
-							 <1100000>, <1100000>,
-							 <1100000>, <1100000>;
-
-			s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>;
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ALIVE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDDQ_M12";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VDDIOAP_18";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDDQ_PRE";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VDD18_2M";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VDD10_MPLL";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD10_XPLL";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VDD10_MIPI";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VDD33_LCD";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VDD18_MIPI";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD18_ABB1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "VDD33_UOTG";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VDDIOPERI_18";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "VDD18_ABB02";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "VDD10_USH";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VDD18_HSIC";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VDDIOAP_MMC012_28";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo18_reg: LDO18 {
-					regulator-name = "VDDIOPERI_28";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo19_reg: LDO19 {
-					regulator-name = "DVDD25";
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo20_reg: LDO20 {
-					regulator-name = "VDD28_CAM";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "VDD28_AF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo22_reg: LDO22 {
-					regulator-name = "VDDA28_2M";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo23_reg: LDO23 {
-					regulator-name = "VDD28_TF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo24_reg: LDO24 {
-					regulator-name = "VDD33_A31";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo25_reg: LDO25 {
-					regulator-name = "VDD18_CAM";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo26_reg: LDO26 {
-					regulator-name = "VDD18_A31";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo27_reg: LDO27 {
-					regulator-name = "GPS_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo28_reg: LDO28 {
-					regulator-name = "DVDD12";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt	= <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt	= <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt	= <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "vdd_m12";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "vdd12_5m";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "vddf28_emmc";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <3000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-			};
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
diff --git a/src/arm/exynos4412-smdk4412.dts b/src/arm/exynos4412-smdk4412.dts
deleted file mode 100644
index ded0b70f7644..000000000000
--- a/src/arm/exynos4412-smdk4412.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Samsung's Exynos4412 based SMDK board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's SMDK4412 board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-
-/ {
-	model = "Samsung SMDK evaluation board based on Exynos4412";
-	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
-	};
-
-	g2d@10800000 {
-		status = "okay";
-	};
-
-	pinctrl@11000000 {
-		keypad_rows: keypad-rows {
-			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_cols: keypad-cols {
-			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
-				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	keypad@100A0000 {
-		samsung,keypad-num-rows = <3>;
-		samsung,keypad-num-columns = <8>;
-		linux,keypad-no-autorepeat;
-		linux,keypad-wakeup;
-		pinctrl-0 = <&keypad_rows &keypad_cols>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		key_1 {
-			keypad,row = <1>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
-
-		key_2 {
-			keypad,row = <1>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
-
-		key_3 {
-			keypad,row = <1>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
-
-		key_4 {
-			keypad,row = <1>;
-			keypad,column = <6>;
-			linux,code = <5>;
-		};
-
-		key_5 {
-			keypad,row = <1>;
-			keypad,column = <7>;
-			linux,code = <6>;
-		};
-
-		key_A {
-			keypad,row = <2>;
-			keypad,column = <6>;
-			linux,code = <30>;
-		};
-
-		key_B {
-			keypad,row = <2>;
-			keypad,column = <7>;
-			linux,code = <48>;
-		};
-
-		key_C {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <46>;
-		};
-
-		key_D {
-			keypad,row = <2>;
-			keypad,column = <5>;
-			linux,code = <32>;
-		};
-
-		key_E {
-			keypad,row = <0>;
-			keypad,column = <7>;
-			linux,code = <18>;
-		};
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
diff --git a/src/arm/exynos4412-tiny4412.dts b/src/arm/exynos4412-tiny4412.dts
deleted file mode 100644
index ea6929d9c621..000000000000
--- a/src/arm/exynos4412-tiny4412.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * FriendlyARM's Exynos4412 based TINY4412 board device tree source
- *
- * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
- *
- * Device tree source file for FriendlyARM's TINY4412 board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-
-/ {
-	model = "FriendlyARM TINY4412 board based on Exynos4412";
-	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "led1";
-			gpios = <&gpm4 0 1>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpm4 1 1>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "led3";
-			gpios = <&gpm4 2 1>;
-			default-state = "off";
-		};
-
-		led4 {
-			label = "led4";
-			gpios = <&gpm4 3 1>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
diff --git a/src/arm/exynos4412-trats2.dts b/src/arm/exynos4412-trats2.dts
deleted file mode 100644
index 11967f4561e0..000000000000
--- a/src/arm/exynos4412-trats2.dts
+++ /dev/null
@@ -1,788 +0,0 @@
-/*
- * Samsung's Exynos4412 based Trats 2 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats 2 board which is based on
- * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-
-/ {
-	model = "Samsung Trats 2 based on Exynos4412";
-	compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		i2c9 = &i2c_ak8975;
-		i2c10 = &i2c_cm36651;
-	};
-
-	memory {
-		reg =  <0x40000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-	};
-
-	firmware@0204F000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti", "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti", "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vemmc_reg: regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 0>;
-			enable-active-high;
-		};
-
-		cam_io_reg: voltage-regulator-1 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_SENSOR_A";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 2 0>;
-			enable-active-high;
-		};
-
-		lcd_vdd3_reg: voltage-regulator-2 {
-			compatible = "regulator-fixed";
-			regulator-name = "LCD_VDD_2.2V";
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			gpio = <&gpc0 1 0>;
-			enable-active-high;
-		};
-
-		cam_af_reg: voltage-regulator-3 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_AF";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 4 0>;
-			enable-active-high;
-		};
-
-		cam_isp_core_reg: voltage-regulator-4 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_ISP_CORE_1.2V_EN";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpm0 3 0>;
-			enable-active-high;
-			regulator-always-on;
-		};
-
-		ps_als_reg: voltage-regulator-5 {
-			compatible = "regulator-fixed";
-			regulator-name = "LED_A_3.0V";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			gpio = <&gpj0 5 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-down {
-			gpios = <&gpx3 3 1>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		key-up {
-			gpios = <&gpx2 2 1>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		key-power {
-			gpios = <&gpx2 7 1>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-
-		key-ok {
-			gpios = <&gpx0 1 1>;
-			linux,code = <139>;
-			label = "ok";
-			debounce-inteval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	adc: adc@126C0000 {
-		vdd-supply = <&ldo3_reg>;
-		status = "okay";
-	};
-
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <400000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		mms114-touchscreen@48 {
-			compatible = "melfas,mms114";
-			reg = <0x48>;
-			interrupt-parent = <&gpm2>;
-			interrupts = <3 2>;
-			x-size = <720>;
-			y-size = <1280>;
-			avdd-supply = <&ldo23_reg>;
-			vdd-supply = <&ldo24_reg>;
-		};
-	};
-
-	i2c_0: i2c@13860000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <400000>;
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		s5c73m3@3c {
-			compatible = "samsung,s5c73m3";
-			reg = <0x3c>;
-			standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
-			xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
-			vdd-int-supply = <&buck9_reg>;
-			vddio-cis-supply = <&ldo9_reg>;
-			vdda-supply = <&ldo17_reg>;
-			vddio-host-supply = <&ldo18_reg>;
-			vdd-af-supply = <&cam_af_reg>;
-			vdd-reg-supply = <&cam_io_reg>;
-			clock-frequency = <24000000>;
-			/* CAM_A_CLKOUT */
-			clocks = <&camera 0>;
-			clock-names = "cis_extclk";
-			port {
-				s5c73m3_ep: endpoint {
-					remote-endpoint = <&csis0_ep>;
-					data-lanes = <1 2 3 4>;
-				};
-			};
-		};
-	};
-
-	i2c@138D0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c7_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		max77686_pmic@09 {
-			compatible = "maxim,max77686";
-			interrupt-parent = <&gpx0>;
-			interrupts = <7 0>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			voltage-regulators {
-				ldo1_reg: ldo1 {
-					regulator-compatible = "LDO1";
-					regulator-name = "VALIVE_1.0V_AP";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo2_reg: ldo2 {
-					regulator-compatible = "LDO2";
-					regulator-name = "VM1M2_1.2V_AP";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo3_reg: ldo3 {
-					regulator-compatible = "LDO3";
-					regulator-name = "VCC_1.8V_AP";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo4_reg: ldo4 {
-					regulator-compatible = "LDO4";
-					regulator-name = "VCC_2.8V_AP";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo5_reg: ldo5 {
-					regulator-compatible = "LDO5";
-					regulator-name = "VCC_1.8V_IO";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo6_reg: ldo6 {
-					regulator-compatible = "LDO6";
-					regulator-name = "VMPLL_1.0V_AP";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo7_reg: ldo7 {
-					regulator-compatible = "LDO7";
-					regulator-name = "VPLL_1.0V_AP";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-mem-on;
-				};
-
-				ldo8_reg: ldo8 {
-					regulator-compatible = "LDO8";
-					regulator-name = "VMIPI_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-mem-off;
-				};
-
-				ldo9_reg: ldo9 {
-					regulator-compatible = "LDO9";
-					regulator-name = "CAM_ISP_MIPI_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-mem-idle;
-				};
-
-				ldo10_reg: ldo10 {
-					regulator-compatible = "LDO10";
-					regulator-name = "VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-off;
-				};
-
-				ldo11_reg: ldo11 {
-					regulator-compatible = "LDO11";
-					regulator-name = "VABB1_1.95V";
-					regulator-min-microvolt = <1950000>;
-					regulator-max-microvolt = <1950000>;
-					regulator-always-on;
-					regulator-mem-off;
-				};
-
-				ldo12_reg: ldo12 {
-					regulator-compatible = "LDO12";
-					regulator-name = "VUOTG_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-mem-off;
-				};
-
-				ldo13_reg: ldo13 {
-					regulator-compatible = "LDO13";
-					regulator-name = "NFC_AVDD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
-				};
-
-				ldo14_reg: ldo14 {
-					regulator-compatible = "LDO14";
-					regulator-name = "VABB2_1.95V";
-					regulator-min-microvolt = <1950000>;
-					regulator-max-microvolt = <1950000>;
-					regulator-always-on;
-					regulator-mem-off;
-				};
-
-				ldo15_reg: ldo15 {
-					regulator-compatible = "LDO15";
-					regulator-name = "VHSIC_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-mem-off;
-				};
-
-				ldo16_reg: ldo16 {
-					regulator-compatible = "LDO16";
-					regulator-name = "VHSIC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-off;
-				};
-
-				ldo17_reg: ldo17 {
-					regulator-compatible = "LDO17";
-					regulator-name = "CAM_SENSOR_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-mem-idle;
-				};
-
-				ldo18_reg: ldo18 {
-					regulator-compatible = "LDO18";
-					regulator-name = "CAM_ISP_SEN_IO_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
-				};
-
-				ldo19_reg: ldo19 {
-					regulator-compatible = "LDO19";
-					regulator-name = "VT_CAM_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
-				};
-
-				ldo20_reg: ldo20 {
-					regulator-compatible = "LDO20";
-					regulator-name = "VDDQ_PRE_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
-				};
-
-				ldo21_reg: ldo21 {
-					regulator-compatible = "LDO21";
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-mem-idle;
-				};
-
-				ldo22_reg: ldo22 {
-					regulator-compatible = "LDO22";
-					regulator-name = "VMEM_VDD_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-mem-off;
-				};
-
-				ldo23_reg: ldo23 {
-					regulator-compatible = "LDO23";
-					regulator-name = "TSP_AVDD_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-mem-idle;
-				};
-
-				ldo24_reg: ldo24 {
-					regulator-compatible = "LDO24";
-					regulator-name = "TSP_VDD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
-				};
-
-				ldo25_reg: ldo25 {
-					regulator-compatible = "LDO25";
-					regulator-name = "LCD_VCC_3.3V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-mem-idle;
-				};
-
-				ldo26_reg: ldo26 {
-					regulator-compatible = "LDO26";
-					regulator-name = "MOTOR_VCC_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-mem-idle;
-				};
-
-				buck1_reg: buck1 {
-					regulator-compatible = "BUCK1";
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-mem-off;
-				};
-
-				buck2_reg: buck2 {
-					regulator-compatible = "BUCK2";
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-mem-off;
-				};
-
-				buck3_reg: buck3 {
-					regulator-compatible = "BUCK3";
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-mem-off;
-				};
-
-				buck4_reg: buck4 {
-					regulator-compatible = "BUCK4";
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-boot-on;
-					regulator-mem-off;
-				};
-
-				buck5_reg: buck5 {
-					regulator-compatible = "BUCK5";
-					regulator-name = "VMEM_1.2V_AP";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck6_reg: buck6 {
-					regulator-compatible = "BUCK6";
-					regulator-name = "VCC_SUB_1.35V";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-				};
-
-				buck7_reg: buck7 {
-					regulator-compatible = "BUCK7";
-					regulator-name = "VCC_SUB_2.0V";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
-
-				buck8_reg: buck8 {
-					regulator-compatible = "BUCK8";
-					regulator-name = "VMEM_VDDF_3.0V";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-					regulator-mem-off;
-				};
-
-				buck9_reg: buck9 {
-					regulator-compatible = "BUCK9";
-					regulator-name = "CAM_ISP_CORE_1.2V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-mem-off;
-				};
-			};
-		};
-	};
-
-	mmc@12550000 {
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		non-removable;
-		card-detect-delay = <200>;
-		vmmc-supply = <&vemmc_reg>;
-		clock-frequency = <400000000>;
-		samsung,dw-mshc-ciu-div = <0>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	i2c_ak8975: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		ak8975@0c {
-			compatible = "asahi-kasei,ak8975";
-			reg = <0x0c>;
-			gpios = <&gpj0 7 0>;
-		};
-	};
-
-	i2c_cm36651: i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 1>, <&gpf0 1 1>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cm36651@18 {
-			compatible = "capella,cm36651";
-			reg = <0x18>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <2 2>;
-			vled-supply = <&ps_als_reg>;
-		};
-	};
-
-	spi_1: spi@13930000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		cs-gpios = <&gpb 5 0>;
-		status = "okay";
-
-		s5c73m3_spi: s5c73m3 {
-			compatible = "samsung,s5c73m3";
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-			controller-data {
-				samsung,spi-feedback-delay = <2>;
-			};
-		};
-	};
-
-	dsi_0: dsi@11C80000 {
-		vddcore-supply = <&ldo8_reg>;
-		vddio-supply = <&ldo10_reg>;
-		samsung,pll-clock-frequency = <24000000>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				dsi_out: endpoint {
-					remote-endpoint = <&dsi_in>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-				};
-			};
-		};
-
-		panel@0 {
-			compatible = "samsung,s6e8aa0";
-			reg = <0>;
-			vdd3-supply = <&lcd_vdd3_reg>;
-			vci-supply = <&ldo25_reg>;
-			reset-gpios = <&gpy4 5 0>;
-			power-on-delay= <50>;
-			reset-delay = <100>;
-			init-delay = <100>;
-			flip-horizontal;
-			flip-vertical;
-			panel-width-mm = <58>;
-			panel-height-mm = <103>;
-
-			display-timings {
-				timing-0 {
-					clock-frequency = <0>;
-					hactive = <720>;
-					vactive = <1280>;
-					hfront-porch = <5>;
-					hback-porch = <5>;
-					hsync-len = <5>;
-					vfront-porch = <13>;
-					vback-porch = <1>;
-					vsync-len = <2>;
-				};
-			};
-
-			port {
-				dsi_in: endpoint {
-					remote-endpoint = <&dsi_out>;
-				};
-			};
-		};
-	};
-
-	fimd@11c00000 {
-		status = "okay";
-	};
-
-	camera: camera {
-		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-		};
-
-		csis_0: csis@11880000 {
-			status = "okay";
-			vddcore-supply = <&ldo8_reg>;
-			vddio-supply = <&ldo10_reg>;
-			clock-frequency = <176000000>;
-
-			/* Camera C (3) MIPI CSI-2 (CSIS0) */
-			port@3 {
-				reg = <3>;
-				csis0_ep: endpoint {
-					remote-endpoint = <&s5c73m3_ep>;
-					data-lanes = <1 2 3 4>;
-					samsung,csis-hs-settle = <12>;
-				};
-			};
-		};
-
-		csis_1: csis@11890000 {
-			vddcore-supply = <&ldo8_reg>;
-			vddio-supply = <&ldo10_reg>;
-			clock-frequency = <160000000>;
-			status = "okay";
-
-			/* Camera D (4) MIPI CSI-2 (CSIS1) */
-			port@4 {
-				reg = <4>;
-				csis1_ep: endpoint {
-					remote-endpoint = <&is_s5k6a3_ep>;
-					data-lanes = <1>;
-					samsung,csis-hs-settle = <18>;
-					samsung,csis-wclk;
-				};
-			};
-		};
-
-		fimc_lite_0: fimc-lite@12390000 {
-			status = "okay";
-		};
-
-		fimc_lite_1: fimc-lite@123A0000 {
-			status = "okay";
-		};
-
-		fimc-is@12000000 {
-			pinctrl-0 = <&fimc_is_uart>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			i2c1_isp: i2c-isp@12140000 {
-				pinctrl-0 = <&fimc_is_i2c1>;
-				pinctrl-names = "default";
-
-				s5k6a3@10 {
-					compatible = "samsung,s5k6a3";
-					reg = <0x10>;
-					svdda-supply = <&cam_io_reg>;
-					svddio-supply = <&ldo19_reg>;
-					afvdd-supply = <&ldo19_reg>;
-					clock-frequency = <24000000>;
-					/* CAM_B_CLKOUT */
-					clocks = <&camera 1>;
-					clock-names = "extclk";
-					samsung,camclk-out = <1>;
-					gpios = <&gpm1 6 0>;
-
-					port {
-						is_s5k6a3_ep: endpoint {
-							remote-endpoint = <&csis1_ep>;
-							data-lanes = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	hsotg@12480000 {
-		vusb_d-supply = <&ldo15_reg>;
-		vusb_a-supply = <&ldo12_reg>;
-		status = "okay";
-	};
-
-	thermistor-ap@0 {
-		compatible = "ntc,ncp15wb473";
-		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
-		pullup-ohm = <100000>;	 /* 100K */
-		pulldown-ohm = <100000>; /* 100K */
-		io-channels = <&adc 1>;  /* AP temperature */
-	};
-
-	thermistor-battery@1 {
-		compatible = "ntc,ncp15wb473";
-		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
-		pullup-ohm = <100000>;	 /* 100K */
-		pulldown-ohm = <100000>; /* 100K */
-		io-channels = <&adc 2>;  /* Battery temperature */
-	};
-};
diff --git a/src/arm/exynos4412.dtsi b/src/arm/exynos4412.dtsi
deleted file mode 100644
index d8bc059e172f..000000000000
--- a/src/arm/exynos4412.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Samsung's Exynos4412 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4x12.dtsi"
-
-/ {
-	compatible = "samsung,exynos4412", "samsung,exynos4";
-
-	combiner: interrupt-controller@10440000 {
-		samsung,combiner-nr = <20>;
-	};
-
-	pmu {
-		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
-	};
-
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x4000>;
-	};
-
-	pmu_system_controller: system-controller@10020000 {
-		compatible = "samsung,exynos4412-pmu", "syscon";
-	};
-};
diff --git a/src/arm/exynos4x12-pinctrl.dtsi b/src/arm/exynos4x12-pinctrl.dtsi
deleted file mode 100644
index 99b26df8dbc7..000000000000
--- a/src/arm/exynos4x12-pinctrl.dtsi
+++ /dev/null
@@ -1,956 +0,0 @@
-/*
- * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb: gpb {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf2: gpf2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf3: gpf3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj1: gpj1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_a: uart-audio-a {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_b: uart-audio-b {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpb-0", "gpb-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_ctrl: lcd-ctrl {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		mipi0_clk: mipi0-clk {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		mipi1_clk: mipi1-clk {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_clk: lcd-clk {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data16: lcd-data-width16 {
-			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data18: lcd-data-width18 {
-			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data24: lcd-data-width24 {
-			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_ldi: lcd-ldi {
-			samsung,pins = "gpf3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_io: cam-port-a-io {
-			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_clk_active: cam-port-a-clk-active {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_a_clk_idle: cam-port-a-clk-idle {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@11000000 {
-		gpk0: gpk0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk1: gpk1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk2: gpk2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk3: gpk3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl0: gpl0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl1: gpl1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl2: gpl2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm0: gpm0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm1: gpm1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm2: gpm2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm3: gpm3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm4: gpm4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_clk: sd4-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cmd: sd4-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cd: sd4-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus1: sd4-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus4: sd4-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <4>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_b_io: cam-port-b-io {
-			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_b_clk_active: cam-port-b-clk-active {
-			samsung,pins = "gpm2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_b_clk_idle: cam-port-b-clk-idle {
-			samsung,pins = "gpm2-2";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint0: ext-int0 {
-			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint8: ext-int8 {
-			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint15: ext-int15 {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint16: ext-int16 {
-			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint31: ext-int31 {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		fimc_is_i2c0: fimc-is-i2c0 {
-			samsung,pins = "gpm4-0", "gpm4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		fimc_is_i2c1: fimc-is-i2c1 {
-			samsung,pins = "gpm4-2", "gpm4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		fimc_is_uart: fimc-is-uart {
-			samsung,pins = "gpm3-5", "gpm3-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm0_bus: pcm0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@106E0000 {
-		gpv0: gpv0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv1: gpv1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv2: gpv2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv3: gpv3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv4: gpv4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		c2c_bus: c2c-bus {
-			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-					"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-					"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-					"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
-					"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-					"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-					"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-					"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
-					"gpv4-0", "gpv4-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-};
diff --git a/src/arm/exynos4x12.dtsi b/src/arm/exynos4x12.dtsi
deleted file mode 100644
index 861bb919f6d3..000000000000
--- a/src/arm/exynos4x12.dtsi
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * Samsung's Exynos4x12 SoCs device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4.dtsi"
-#include "exynos4x12-pinctrl.dtsi"
-
-/ {
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		fimc-lite0 = &fimc_lite_0;
-		fimc-lite1 = &fimc_lite_1;
-		mshc0 = &mshc_0;
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x40000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x40000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@2f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x2f000 0x1000>;
-		};
-	};
-
-	pd_isp: isp-power-domain@10023CA0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CA0 0x20>;
-	};
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4412-clock";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
-
-	mct@10050000 {
-		compatible = "samsung,exynos4412-mct";
-		reg = <0x10050000 0x800>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 0>,
-					<1 &combiner 12 5>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 1 12 0>;
-		};
-	};
-
-	combiner: interrupt-controller@10440000 {
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-			     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
-	};
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
-
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-	adc: adc@126C0000 {
-		compatible = "samsung,exynos-adc-v1";
-		reg = <0x126C0000 0x100>, <0x10020718 0x4>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 3>;
-		clocks = <&clock CLK_TSADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		status = "disabled";
-	};
-
-	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 0>;
-	};
-
-	pinctrl_3: pinctrl@106E0000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x106E0000 0x1000>;
-		interrupts = <0 72 0>;
-	};
-
-	pmu_system_controller: system-controller@10020000 {
-		compatible = "samsung,exynos4212-pmu", "syscon";
-		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-				"clkout4", "clkout8", "clkout9";
-		clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-			<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-			<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
-			<&clock CLK_XUSBXTI>;
-		#clock-cells = <1>;
-	};
-
-	g2d@10800000 {
-		compatible = "samsung,exynos4212-g2d";
-		reg = <0x10800000 0x1000>;
-		interrupts = <0 89 0>;
-		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-		clock-names = "sclk_fimg2d", "fimg2d";
-		status = "disabled";
-	};
-
-	camera {
-		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-		fimc_0: fimc@11800000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,cam-if;
-		};
-
-		fimc_1: fimc@11810000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,cam-if;
-		};
-
-		fimc_2: fimc@11820000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,lcd-wb;
-			samsung,cam-if;
-		};
-
-		fimc_3: fimc@11830000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <1920 8192 1366 1920>;
-			samsung,rotators = <0>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,lcd-wb;
-		};
-
-		fimc_lite_0: fimc-lite@12390000 {
-			compatible = "samsung,exynos4212-fimc-lite";
-			reg = <0x12390000 0x1000>;
-			interrupts = <0 105 0>;
-			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE0>;
-			clock-names = "flite";
-			status = "disabled";
-		};
-
-		fimc_lite_1: fimc-lite@123A0000 {
-			compatible = "samsung,exynos4212-fimc-lite";
-			reg = <0x123A0000 0x1000>;
-			interrupts = <0 106 0>;
-			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE1>;
-			clock-names = "flite";
-			status = "disabled";
-		};
-
-		fimc_is: fimc-is@12000000 {
-			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
-			reg = <0x12000000 0x260000>;
-			interrupts = <0 90 0>, <0 95 0>;
-			samsung,power-domain = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE0>,
-				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
-				 <&clock CLK_PPMUISPMX>,
-				 <&clock CLK_MOUT_MPLL_USER_T>,
-				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
-				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
-				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
-				 <&clock CLK_DIV_MCUISP0>,
-				 <&clock CLK_DIV_MCUISP1>,
-				 <&clock CLK_SCLK_UART_ISP>,
-				 <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
-				 <&clock CLK_ACLK400_MCUISP>,
-				 <&clock CLK_DIV_ACLK400_MCUISP>;
-			clock-names = "lite0", "lite1", "ppmuispx",
-				      "ppmuispmx", "mpll", "isp",
-				      "drc", "fd", "mcuisp",
-				      "ispdiv0", "ispdiv1", "mcuispdiv0",
-				      "mcuispdiv1", "uart", "aclk200",
-				      "div_aclk200", "aclk400mcuisp",
-				      "div_aclk400mcuisp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			pmu {
-				reg = <0x10020000 0x3000>;
-			};
-
-			i2c1_isp: i2c-isp@12140000 {
-				compatible = "samsung,exynos4212-i2c-isp";
-				reg = <0x12140000 0x100>;
-				clocks = <&clock CLK_I2C1_ISP>;
-				clock-names = "i2c_isp";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-	};
-
-	mshc_0: mmc@12550000 {
-		compatible = "samsung,exynos4412-dw-mshc";
-		reg = <0x12550000 0x1000>;
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		fifo-depth = <0x80>;
-		clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
-		clock-names = "biu", "ciu";
-		status = "disabled";
-	};
-
-	exynos-usbphy@125B0000 {
-		compatible = "samsung,exynos4x12-usb2-phy";
-		samsung,sysreg-phandle = <&sys_reg>;
-	};
-};
diff --git a/src/arm/exynos5.dtsi b/src/arm/exynos5.dtsi
deleted file mode 100644
index a0cc0b6f8f96..000000000000
--- a/src/arm/exynos5.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Samsung's Exynos5 SoC series common device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular
- * SoCs from Exynos5 series can include this file and provide values for SoCs
- * specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		serial2 = &serial_2;
-		serial3 = &serial_3;
-	};
-
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
-
-	combiner: interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		samsung,combiner-nr = <32>;
-		reg = <0x10440000 0x1000>;
-		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-	};
-
-	gic: interrupt-controller@10481000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x10481000 0x1000>,
-			<0x10482000 0x1000>,
-			<0x10484000 0x2000>,
-			<0x10486000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	serial_0: serial@12C00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-	};
-
-	serial_1: serial@12C10000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C10000 0x100>;
-		interrupts = <0 52 0>;
-	};
-
-	serial_2: serial@12C20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C20000 0x100>;
-		interrupts = <0 53 0>;
-	};
-
-	serial_3: serial@12C30000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C30000 0x100>;
-		interrupts = <0 54 0>;
-	};
-
-	rtc@101E0000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x101E0000 0x100>;
-		interrupts = <0 43 0>, <0 44 0>;
-		status = "disabled";
-	};
-
-	fimd@14400000 {
-		compatible = "samsung,exynos5250-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x14400000 0x40000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <18 4>, <18 5>, <18 6>;
-		samsung,sysreg = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	dp-controller@145B0000 {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145B0000 0x1000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/exynos5250-arndale.dts b/src/arm/exynos5250-arndale.dts
deleted file mode 100644
index d0de1f50d15b..000000000000
--- a/src/arm/exynos5250-arndale.dts
+++ /dev/null
@@ -1,577 +0,0 @@
-/*
- * Samsung's Exynos5250 based Arndale board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5250.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Insignal Arndale evaluation board based on EXYNOS5250";
-	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200";
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	i2c@12C60000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		samsung,i2c-slave-addr = <0x66>;
-		status = "okay";
-
-		s5m8767_pmic@66 {
-			compatible = "samsung,s5m8767-pmic";
-			reg = <0x66>;
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-			vinb1-supply = <&main_dc_reg>;
-			vinb2-supply = <&main_dc_reg>;
-			vinb3-supply = <&main_dc_reg>;
-			vinb4-supply = <&main_dc_reg>;
-			vinb5-supply = <&main_dc_reg>;
-			vinb6-supply = <&main_dc_reg>;
-			vinb7-supply = <&main_dc_reg>;
-			vinb8-supply = <&main_dc_reg>;
-			vinb9-supply = <&main_dc_reg>;
-
-			vinl1-supply = <&buck7_reg>;
-			vinl2-supply = <&buck7_reg>;
-			vinl3-supply = <&buck7_reg>;
-			vinl4-supply = <&main_dc_reg>;
-			vinl5-supply = <&main_dc_reg>;
-			vinl6-supply = <&main_dc_reg>;
-			vinl7-supply = <&main_dc_reg>;
-			vinl8-supply = <&buck8_reg>;
-			vinl9-supply = <&buck8_reg>;
-
-			s5m8767,pmic-buck2-dvs-voltage = <1300000>;
-			s5m8767,pmic-buck3-dvs-voltage = <1100000>;
-			s5m8767,pmic-buck4-dvs-voltage = <1200000>;
-			s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
-							<&gpd1 1 0>,
-							<&gpd1 2 0>;
-			s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
-							<&gpx2 4 0>,
-							<&gpx2 5 0>;
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ALIVE_1.0V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDD_28IO_DP_1.35V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VDD_COMMON1_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDD_IOPERI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VDD_EXT_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VDD_MPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD_XPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VDD_COMMON2_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VDD_33ON_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					op_mode = <1>;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VDD_COMMON3_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD_ABB2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "VDD_USB_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VDDQ_C2C_W_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "VDD18_ABB0_3_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "VDD10_COMMON4_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VDD18_HSIC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VDDQ_MMC2_3_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				ldo18_reg: LDO18 {
-					regulator-name = "VDD_33ON_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					op_mode = <1>;
-				};
-
-				ldo22_reg: LDO22 {
-					regulator-name = "EXT_33_OFF";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					op_mode = <1>;
-				};
-
-				ldo23_reg: LDO23 {
-					regulator-name = "EXT_28_OFF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					op_mode = <1>;
-				};
-
-				ldo25_reg: LDO25 {
-					regulator-name = "PVDD_LDO25";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					op_mode = <1>;
-				};
-
-				ldo26_reg: LDO26 {
-					regulator-name = "EXT_18_OFF";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					op_mode = <1>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <912500>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "VDD_MEM_1.35V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1355000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "PVDD_BUCK7";
-					regulator-always-on;
-					op_mode = <1>;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "PVDD_BUCK8";
-					regulator-always-on;
-					op_mode = <1>;
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "VDD_33_OFF_EXT1";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <3000000>;
-					op_mode = <1>;
-				};
-			};
-		};
-	};
-
-	i2c@12C80000 {
-		status = "okay";
-
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		samsung,i2c-slave-addr = <0x50>;
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	i2c@12C90000 {
-		status = "okay";
-
-		wm1811a@1a {
-
-			compatible = "wlf,wm1811";
-			reg = <0x1a>;
-
-			AVDD2-supply = <&main_dc_reg>;
-			CPVDD-supply = <&main_dc_reg>;
-			DBVDD1-supply = <&main_dc_reg>;
-			DBVDD2-supply = <&main_dc_reg>;
-			DBVDD3-supply = <&main_dc_reg>;
-			LDO1VDD-supply = <&main_dc_reg>;
-			SPKVDD1-supply = <&main_dc_reg>;
-			SPKVDD2-supply = <&main_dc_reg>;
-
-			wlf,ldo1ena = <&gpb0 0 0>;
-			wlf,ldo2ena = <&gpb0 1 0>;
-		};
-	};
-
-	i2c@12CE0000 {
-		status = "okay";
-
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		samsung,i2c-slave-addr = <0x38>;
-
-		hdmiphy@38 {
-			compatible = "samsung,exynos4212-hdmiphy";
-			reg = <0x38>;
-		};
-	};
-
-	i2c@121D0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <40000>;
-		samsung,i2c-slave-addr = <0x38>;
-
-		sata_phy_i2c:sata-phy@38 {
-			compatible = "samsung,exynos-sataphy-i2c";
-			reg = <0x38>;
-		};
-	};
-
-	sata@122F0000 {
-		status = "okay";
-	};
-
-	sata-phy@12170000 {
-		status = "okay";
-		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-	};
-
-	mmc_0: mmc@12200000 {
-		status = "okay";
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		vmmc-supply = <&mmc_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc_2: mmc@12220000 {
-		status = "okay";
-		num-slots = <1>;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		vmmc-supply = <&mmc_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-		};
-	};
-
-	i2s0: i2s@03830000 {
-		status = "okay";
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		menu {
-			label = "SW-TACT2";
-			gpios = <&gpx1 4 1>;
-			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
-		};
-
-		home {
-			label = "SW-TACT3";
-			gpios = <&gpx1 5 1>;
-			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
-		};
-
-		up {
-			label = "SW-TACT4";
-			gpios = <&gpx1 6 1>;
-			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
-		};
-
-		down {
-			label = "SW-TACT5";
-			gpios = <&gpx1 7 1>;
-			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
-		};
-
-		back {
-			label = "SW-TACT6";
-			gpios = <&gpx2 0 1>;
-			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
-		};
-
-		wakeup {
-			label = "SW-TACT7";
-			gpios = <&gpx2 1 1>;
-			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
-		};
-	};
-
-	hdmi {
-		hpd-gpio = <&gpx3 7 2>;
-		vdd_osc-supply = <&ldo10_reg>;
-		vdd_pll-supply = <&ldo8_reg>;
-		vdd-supply = <&ldo8_reg>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		main_dc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "MAIN_DC";
-		};
-
-		mmc_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_33ON_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 1>;
-			enable-active-high;
-		};
-
-		reg_hdmi_en: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdmi-en";
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	dp-controller@145B0000 {
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
-		status = "okay";
-	};
-
-	fimd: fimd@14400000 {
-		status = "okay";
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing@0 {
-				/* 2560x1600 DP panel */
-				clock-frequency = <50000>;
-				hactive = <2560>;
-				vactive = <1600>;
-				hfront-porch = <48>;
-				hback-porch = <80>;
-				hsync-len = <32>;
-				vback-porch = <16>;
-				vfront-porch = <8>;
-				vsync-len = <6>;
-			};
-		};
-	};
-
-	usb_hub_bus {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		// SMSC USB3503 connected in hardware only mode as a PHY
-		usb_hub: usb_hub {
-			compatible = "smsc,usb3503a";
-
-			reset-gpios = <&gpx3 5 1>;
-			connect-gpios = <&gpd1 7 1>;
-		};
-	};
-
-	usb@12110000 {
-		usb-phy = <&usb2_phy>;
-	};
-};
diff --git a/src/arm/exynos5250-cros-common.dtsi b/src/arm/exynos5250-cros-common.dtsi
deleted file mode 100644
index e603e9c70142..000000000000
--- a/src/arm/exynos5250-cros-common.dtsi
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Common device tree include for all Exynos 5250 boards based off of Daisy.
- *
- * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	aliases {
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-	};
-
-	pinctrl@11400000 {
-		/*
-		 * Disabled pullups since external part has its own pullups and
-		 * double-pulling gets us out of spec in some cases.
-		 */
-		i2c2_bus: i2c2-bus {
-			samsung,pin-pud = <0>;
-		};
-	};
-
-	i2c@12C60000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <378000>;
-	};
-
-	i2c@12C70000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <378000>;
-	};
-
-	i2c@12C80000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	i2c@12C90000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CA0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CB0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CD0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CE0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <378000>;
-
-		hdmiphy: hdmiphy@38 {
-			compatible = "samsung,exynos4212-hdmiphy";
-			reg = <0x38>;
-		};
-	};
-
-	mmc@12200000 {
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc@12220000 {
-		num-slots = <1>;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			wp-gpios = <&gpc2 1 0>;
-		};
-	};
-
-	mmc@12230000 {
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		/* See board-specific dts files for pin setup */
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
-	};
-
-	spi_1: spi@12d30000 {
-		status = "okay";
-		samsung,spi-src-clk = <0>;
-		num-cs = <1>;
-	};
-
-	hdmi {
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_irq>;
-		phy = <&hdmiphy>;
-		ddc = <&i2c_2>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 3 1>;
-			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
-		};
-	};
-};
diff --git a/src/arm/exynos5250-pinctrl.dtsi b/src/arm/exynos5250-pinctrl.dtsi
deleted file mode 100644
index 886cfca044ac..000000000000
--- a/src/arm/exynos5250-pinctrl.dtsi
+++ /dev/null
@@ -1,818 +0,0 @@
-/*
- * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa2: gpa2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb0: gpb0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb1: gpb1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb2: gpb2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb3: gpb3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc2: gpc2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc3: gpc3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpc4: gpc4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-				     <26 0>, <26 1>, <27 0>, <27 1>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-				     <30 0>, <30 1>, <31 0>, <31 1>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_hs_bus: i2c2-hs-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_hs_bus: i2c3-hs-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpa2-0", "gpa2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpa2-2", "gpa2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpb1-0", "gpb1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpb1-3", "gpb1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpb2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpb2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpb2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpb2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpb2-2", "gpb2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_hs_bus: i2c0-hs-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_hs_bus: i2c1-hs-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpc0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpc0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpc0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpc0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpc2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpc2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpc2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpc2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpc3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpc3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpc3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpc3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpc4-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpc4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpc4-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpc4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		dp_hpd: dp_hpd {
-			samsung,pins = "gpx0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13400000 {
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg0: gpg0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg1: gpg1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg2: gpg2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph0: gph0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph1: gph1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		cam_gpio_a: cam-gpio-a {
-			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				       "gpe1-0", "gpe1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_gpio_b: cam-gpio-b {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c2_bus: cam-i2c2-bus {
-			samsung,pins = "gpe0-6", "gpe1-0";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi1_bus: cam-spi1-bus {
-			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c1_bus: cam-i2c1-bus {
-			samsung,pins = "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c0_bus: cam-i2c0-bus {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi0_bus: cam-spi0-bus {
-			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_bayrgb_bus: cam-bayrgb-bus {
-			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-				       "gpg2-0", "gpg2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a: cam-port-a {
-			samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
-				       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
-				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@10d10000 {
-		gpv0: gpv0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv1: gpv1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv2: gpv2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv3: gpv3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv4: gpv4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		c2c_rxd: c2c-rxd {
-			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-				       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-				       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		c2c_txd: c2c-txd {
-			samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-				       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-				       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-};
diff --git a/src/arm/exynos5250-smdk5250.dts b/src/arm/exynos5250-smdk5250.dts
deleted file mode 100644
index b4b35adae565..000000000000
--- a/src/arm/exynos5250-smdk5250.dts
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * SAMSUNG SMDK5250 board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5250.dtsi"
-
-/ {
-	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
-	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	i2c@12C60000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		status = "okay";
-
-		eeprom@50 {
-			compatible = "samsung,s524ad0xd1";
-			reg = <0x50>;
-		};
-
-		max77686@09 {
-			compatible = "maxim,max77686";
-			reg = <0x09>;
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 0>;
-
-			voltage-regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "P1.0V_LDO_OUT1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "P1.2V_LDO_OUT2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "P1.8V_LDO_OUT3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "P2.8V_LDO_OUT4";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "P1.8V_LDO_OUT5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "P1.1V_LDO_OUT6";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "P1.1V_LDO_OUT7";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "P1.0V_LDO_OUT8";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "P1.8V_LDO_OUT10";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "P1.8V_LDO_OUT11";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "P3.0V_LDO_OUT12";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "P1.8V_LDO_OUT13";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "P1.8V_LDO_OUT14";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "P1.0V_LDO_OUT15";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "P1.8V_LDO_OUT16";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "P1.8V_BUCK_OUT5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	vdd: fixed-regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd-supply";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	dbvdd: fixed-regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "dbvdd-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	spkvdd: fixed-regulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "spkvdd-supply";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	i2c@12C70000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		status = "okay";
-
-		eeprom@51 {
-			compatible = "samsung,s524ad0xd1";
-			reg = <0x51>;
-		};
-
-		wm8994: wm8994@1a {
-			compatible = "wlf,wm8994";
-			reg = <0x1a>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			clocks = <&codec_mclk>;
-			clock-names = "MCLK1";
-
-			AVDD2-supply = <&vdd>;
-			CPVDD-supply = <&vdd>;
-			DBVDD-supply = <&dbvdd>;
-			SPKVDD1-supply = <&spkvdd>;
-			SPKVDD2-supply = <&spkvdd>;
-		};
-	};
-
-	i2c@121D0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <40000>;
-		samsung,i2c-slave-addr = <0x38>;
-		status = "okay";
-
-		sata_phy_i2c:sata-phy@38 {
-			compatible = "samsung,exynos-sataphy-i2c";
-			reg = <0x38>;
-		};
-	};
-
-	i2c@12C80000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		status = "okay";
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	i2c@12CE0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		status = "okay";
-
-		hdmiphy@38 {
-			compatible = "samsung,exynos4212-hdmiphy";
-			reg = <0x38>;
-		};
-	};
-
-	sata@122F0000 {
-		status = "okay";
-	};
-
-	sata-phy@12170000 {
-		status = "okay";
-		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-	};
-
-	mmc@12200000 {
-		status = "okay";
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc@12220000 {
-		status = "okay";
-		num-slots = <1>;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			disable-wp;
-		};
-	};
-
-	spi_1: spi@12d30000 {
-		cs-gpios = <&gpa2 5 0>;
-		status = "okay";
-
-		w25q80bw@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "w25x80";
-			reg = <0>;
-			spi-max-frequency = <1000000>;
-
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
-			};
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "Kernel";
-				reg = <0x40000 0xc0000>;
-			};
-		};
-	};
-
-	hdmi {
-		hpd-gpio = <&gpx3 7 0>;
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	i2s0: i2s@03830000 {
-		status = "okay";
-	};
-
-	sound {
-		compatible = "samsung,smdk-wm8994";
-
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&wm8994>;
-	};
-
-	usb@12110000 {
-		samsung,vbus-gpio = <&gpx2 6 0>;
-	};
-
-	dp-controller@145B0000 {
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-		status = "okay";
-	};
-
-	fimd@14400000 {
-		status = "okay";
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing@0 {
-				/* 1280x800 */
-				clock-frequency = <50000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hfront-porch = <4>;
-				hback-porch = <4>;
-				hsync-len = <4>;
-				vback-porch = <4>;
-				vfront-porch = <4>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-
-		codec_mclk: codec-mclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <16934000>;
-		};
-	};
-};
diff --git a/src/arm/exynos5250-snow.dts b/src/arm/exynos5250-snow.dts
deleted file mode 100644
index f2b8c4116541..000000000000
--- a/src/arm/exynos5250-snow.dts
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- * Google Snow board device tree source
- *
- * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5250.dtsi"
-#include "exynos5250-cros-common.dtsi"
-
-/ {
-	model = "Google Snow";
-	compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-		i2c104 = &i2c_104;
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	pinctrl@11400000 {
-		ec_irq: ec-irq {
-			samsung,pins = "gpx1-6";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pin-drv = <0>;
-		};
-
-		max98095_en: max98095-en {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		tps65090_irq: tps65090-irq {
-			samsung,pins = "gpx2-6";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		usb3_vbus_en: usb3-vbus-en {
-			samsung,pins = "gpx2-7";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		hdmi_hpd_irq: hdmi-hpd-irq {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13400000 {
-		arb_their_claim: arb-their-claim {
-			samsung,pins = "gpe0-4";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		arb_our_claim: arb-our-claim {
-			samsung,pins = "gpf0-3";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		lid-switch {
-			label = "Lid";
-			gpios = <&gpx3 5 1>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-
-	vbat: vbat-fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-	};
-
-	i2c-arbitrator {
-		compatible = "i2c-arb-gpio-challenge";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@12CA0000}>;
-
-		our-claim-gpio = <&gpf0 3 1>;
-		their-claim-gpios = <&gpe0 4 1>;
-		slew-delay-us = <10>;
-		wait-retry-us = <3000>;
-		wait-free-us = <50000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
-		/* Use ID 104 as a hint that we're on physical bus 4 */
-		i2c_104: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-
-			cros_ec: embedded-controller {
-				compatible = "google,cros-ec-i2c";
-				reg = <0x1e>;
-				interrupts = <6 0>;
-				interrupt-parent = <&gpx1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&ec_irq>;
-				wakeup-source;
-			};
-
-			power-regulator {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					dcdc1 {
-						ti,enable-ext-control;
-					};
-					dcdc2 {
-						ti,enable-ext-control;
-					};
-					dcdc3 {
-						ti,enable-ext-control;
-					};
-					fet1 {
-						regulator-name = "vcd_led";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet4 {
-						regulator-name = "sdcard";
-						ti,overcurrent-wait = <3>;
-					};
-					fet5 {
-						regulator-name = "camout";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet6 {
-						regulator-name = "lcd_vdd";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					ldo1 {
-					};
-					ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
-
-	mmc@12200000 {
-		status = "okay";
-	};
-
-	mmc@12220000 {
-		status = "okay";
-	};
-
-	/*
-	 * On Snow we've got SIP WiFi and so can keep drive strengths low to
-	 * reduce EMI.
-	 */
-	mmc@12230000 {
-		status = "okay";
-		slot@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
-		};
-	};
-
-	i2c@12CD0000 {
-		max98095: codec@11 {
-			compatible = "maxim,max98095";
-			reg = <0x11>;
-			pinctrl-0 = <&max98095_en>;
-			pinctrl-names = "default";
-		};
-	};
-
-	i2s0: i2s@03830000 {
-		status = "okay";
-	};
-
-	sound {
-		compatible = "google,snow-audio-max98095";
-
-		samsung,model = "Snow-I2S-MAX98095";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98095>;
-	};
-
-	usb3_vbus_reg: regulator-usb3 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpx2 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_en>;
-		enable-active-high;
-	};
-
-	phy@12100000 {
-		vbus-supply = <&usb3_vbus_reg>;
-	};
-
-	usb@12110000 {
-		samsung,vbus-gpio = <&gpx1 1 0>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	hdmi {
-		hdmi-en-supply = <&tps65090_fet7>;
-		vdd-supply = <&ldo8_reg>;
-		vdd_osc-supply = <&ldo10_reg>;
-		vdd_pll-supply = <&ldo8_reg>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	fimd@14400000 {
-		status = "okay";
-		samsung,invert-vclk;
-	};
-
-	dp-controller@145B0000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <2>;
-		samsung,hpd-gpio = <&gpx0 7 0>;
-
-		display-timings {
-			native-mode = <&timing1>;
-
-			timing1: timing@1 {
-				clock-frequency = <70589280>;
-				hactive = <1366>;
-				vactive = <768>;
-				hfront-porch = <40>;
-				hback-porch = <40>;
-				hsync-len = <32>;
-				vback-porch = <10>;
-				vfront-porch = <12>;
-				vsync-len = <6>;
-			};
-		};
-	};
-};
-
-&i2c_0 {
-	max77686@09 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77686_irq>;
-		wakeup-source;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "P1.0V_LDO_OUT1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "P1.8V_LDO_OUT2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "P1.8V_LDO_OUT3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "P1.1V_LDO_OUT7";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "P1.0V_LDO_OUT8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "P1.8V_LDO_OUT10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "P3.0V_LDO_OUT12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "P1.8V_LDO_OUT14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "P1.0V_LDO_OUT15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "P1.8V_LDO_OUT16";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "P1.8V_BUCK_OUT5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "P1.35V_BUCK_OUT6";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "P2.0V_BUCK_OUT7";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "P2.85V_BUCK_OUT8";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	trackpad {
-		reg = <0x67>;
-		compatible = "cypress,cyapa";
-		interrupts = <2 0>;
-		interrupt-parent = <&gpx1>;
-		wakeup-source;
-	};
-};
-
-&pinctrl_0 {
-	max77686_irq: max77686-irq {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/exynos5250.dtsi b/src/arm/exynos5250.dtsi
deleted file mode 100644
index 492e1eff37bd..000000000000
--- a/src/arm/exynos5250.dtsi
+++ /dev/null
@@ -1,784 +0,0 @@
-/*
- * SAMSUNG EXYNOS5250 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
- * EXYNOS5250 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
- * additional nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/clock/exynos5250.h>
-#include "exynos5.dtsi"
-#include "exynos5250-pinctrl.dtsi"
-
-#include <dt-bindings/clock/exynos-audss-clk.h>
-
-/ {
-	compatible = "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		gsc0 = &gsc_0;
-		gsc1 = &gsc_1;
-		gsc2 = &gsc_2;
-		gsc3 = &gsc_3;
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		mshc3 = &mmc_3;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-		i2c8 = &i2c_8;
-		i2c9 = &i2c_9;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1700000000>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1700000000>;
-		};
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x30000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x30000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@2f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x2f000 0x1000>;
-		};
-	};
-
-	pd_gsc: gsc-power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-	};
-
-	pd_mfc: mfc-power-domain@10044040 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044040 0x20>;
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5250-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
-
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5250-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
-			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		/* Unfortunately we need this since some versions of U-Boot
-		 * on Exynos don't set the CNTFRQ register, so we need the
-		 * value from DT.
-		 */
-		clock-frequency = <24000000>;
-	};
-
-	mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrups-cells = <2>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-			     <4 0>, <5 0>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0x0 0 &combiner 23 3>,
-					<0x1 0 &combiner 23 4>,
-					<0x2 0 &combiner 25 2>,
-					<0x3 0 &combiner 25 3>,
-					<0x4 0 &gic 0 120 0>,
-					<0x5 0 &gic 0 121 0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <1 2>, <22 4>;
-	};
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 46 0>;
-
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-	pinctrl_1: pinctrl@13400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
-	};
-
-	pinctrl_2: pinctrl@10d10000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x10d10000 0x1000>;
-		interrupts = <0 50 0>;
-	};
-
-	pinctrl_3: pinctrl@03860000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5250-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-	};
-
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
-	watchdog@101D0000 {
-		compatible = "samsung,exynos5250-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
-
-	g2d@10850000 {
-		compatible = "samsung,exynos5250-g2d";
-		reg = <0x10850000 0x1000>;
-		interrupts = <0 91 0>;
-		clocks = <&clock CLK_G2D>;
-		clock-names = "fimg2d";
-	};
-
-	codec@11000000 {
-		compatible = "samsung,mfc-v6";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		samsung,power-domain = <&pd_mfc>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-	};
-
-	rtc@101E0000 {
-		clocks = <&clock CLK_RTC>;
-		clock-names = "rtc";
-		status = "disabled";
-	};
-
-	tmu@10060000 {
-		compatible = "samsung,exynos5250-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-	};
-
-	serial@12C00000 {
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial@12C10000 {
-		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial@12C20000 {
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial@12C30000 {
-		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	sata@122F0000 {
-		compatible = "snps,dwc-ahci";
-		samsung,sata-freq = <66>;
-		reg = <0x122F0000 0x1ff>;
-		interrupts = <0 115 0>;
-		clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
-		clock-names = "sata", "sclk_sata";
-		phys = <&sata_phy>;
-		phy-names = "sata-phy";
-		status = "disabled";
-	};
-
-	sata_phy: sata-phy@12170000 {
-		compatible = "samsung,exynos5250-sata-phy";
-		reg = <0x12170000 0x1ff>;
-		clocks = <&clock CLK_SATA_PHYCTRL>;
-		clock-names = "sata_phyctrl";
-		#phy-cells = <0>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		status = "disabled";
-	};
-
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "disabled";
-	};
-
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		status = "disabled";
-	};
-
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		status = "disabled";
-	};
-
-	i2c_4: i2c@12CA0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CA0000 0x100>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C4>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_bus>;
-		status = "disabled";
-	};
-
-	i2c_5: i2c@12CB0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CB0000 0x100>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C5>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_bus>;
-		status = "disabled";
-	};
-
-	i2c_6: i2c@12CC0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CC0000 0x100>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C6>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_bus>;
-		status = "disabled";
-	};
-
-	i2c_7: i2c@12CD0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CD0000 0x100>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C7>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_bus>;
-		status = "disabled";
-	};
-
-	i2c_8: i2c@12CE0000 {
-		compatible = "samsung,s3c2440-hdmiphy-i2c";
-		reg = <0x12CE0000 0x1000>;
-		interrupts = <0 64 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C_HDMI>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
-
-	i2c_9: i2c@121D0000 {
-                compatible = "samsung,exynos5-sata-phy-i2c";
-                reg = <0x121D0000 0x100>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-		clocks = <&clock CLK_SATA_PHYI2C>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
-
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-	};
-
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 67 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-	};
-
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-	};
-
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x1000>;
-		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
-
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x1000>;
-		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
-
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
-
-	mmc_3: mmc@12230000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		reg = <0x12230000 0x1000>;
-		interrupts = <0 78 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
-
-	i2s0: i2s@03830000 {
-		compatible = "samsung,s5pv210-i2s";
-		status = "disabled";
-		reg = <0x03830000 0x100>;
-		dmas = <&pdma0 10
-			&pdma0 9
-			&pdma0 8>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
-
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-	};
-
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-	};
-
-	usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USB3>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dwc3 {
-			compatible = "synopsys,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
-			phy-names = "usb2-phy", "usb3-phy";
-		};
-	};
-
-	usbdrd_phy: phy@12100000 {
-		compatible = "samsung,exynos5250-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy_gen 1>;
-		};
-	};
-
-	usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy_gen 1>;
-		};
-	};
-
-	usb2_phy: usbphy@12130000 {
-		compatible = "samsung,exynos5250-usb2phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB2>;
-		clock-names = "ext_xtal", "usbhost";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbphy-sys {
-			reg = <0x10040704 0x8>,
-			      <0x10050230 0x4>;
-		};
-	};
-
-	usb2_phy_gen: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
-
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma0: mdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		mdma1: mdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-	};
-
-	gsc_0:  gsc@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-	};
-
-	gsc_1:  gsc@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-	};
-
-	gsc_2:  gsc@13e20000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e20000 0x1000>;
-		interrupts = <0 87 0>;
-		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL2>;
-		clock-names = "gscl";
-	};
-
-	gsc_3:  gsc@13e30000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e30000 0x1000>;
-		interrupts = <0 88 0>;
-		samsung,power-domain = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL3>;
-		clock-names = "gscl";
-	};
-
-	hdmi {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x70000>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "mout_hdmi";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
-
-	mixer {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "sclk_hdmi";
-	};
-
-	dp_phy: video-phy@10040720 {
-		compatible = "samsung,exynos5250-dp-video-phy";
-		reg = <0x10040720 4>;
-		#phy-cells = <0>;
-	};
-
-	dp-controller@145B0000 {
-		clocks = <&clock CLK_DP>;
-		clock-names = "dp";
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
-
-	fimd@14400000 {
-		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-		clock-names = "sclk_fimd", "fimd";
-	};
-
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v1";
-		reg = <0x12D10000 0x100>, <0x10040718 0x4>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_ADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		status = "disabled";
-	};
-
-	sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
-};
diff --git a/src/arm/exynos5260-pinctrl.dtsi b/src/arm/exynos5260-pinctrl.dtsi
deleted file mode 100644
index f6ee55ea0708..000000000000
--- a/src/arm/exynos5260-pinctrl.dtsi
+++ /dev/null
@@ -1,574 +0,0 @@
-/*
- * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	3
-
-&pinctrl_0 {
-	gpa0: gpa0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa2: gpa2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb0: gpb0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb1: gpb1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb2: gpb2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb3: gpb3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb4: gpb4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb5: gpb5 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd2: gpd2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe0: gpe0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe1: gpe1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk0: gpk0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx0: gpx0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	usb3_vbus0_en: usb3-vbus0-en {
-		samsung,pins = "gpa2-4";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s1_bus: i2s1-bus {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-				"gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	pcm1_bus: pcm1-bus {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-				"gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	spdif1_bus: spdif1-bus {
-		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi2_bus: spi2-bus {
-		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c0_hs_bus: i2c0-hs-bus {
-		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c1_hs_bus: i2c1-hs-bus {
-		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c2_hs_bus: i2c2-hs-bus {
-		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c3_hs_bus: i2c3-hs-bus {
-		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c4_bus: i2c4-bus {
-		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c5_bus: i2c5-bus {
-		samsung,pins = "gpb4-2", "gpb4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c6_bus: i2c6-bus {
-		samsung,pins = "gpb4-4", "gpb4-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c7_bus: i2c7-bus {
-		samsung,pins = "gpb4-6", "gpb4-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c8_bus: i2c8-bus {
-		samsung,pins = "gpb5-0", "gpb5-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c9_bus: i2c9-bus {
-		samsung,pins = "gpb5-2", "gpb5-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c10_bus: i2c10-bus {
-		samsung,pins = "gpb5-4", "gpb5-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c11_bus: i2c11-bus {
-		samsung,pins = "gpb5-6", "gpb5-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_gpio_a: cam-gpio-a {
-		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-			"gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_gpio_b: cam-gpio-b {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_i2c1_bus: cam-i2c1-bus {
-		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_i2c0_bus: cam-i2c0-bus {
-		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_spi0_bus: cam-spi0-bus {
-		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_spi1_bus: cam-spi1-bus {
-		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_1 {
-	gpc0: gpc0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc2: gpc2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc3: gpc3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc4: gpc4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus1: sd0-bus-width1 {
-		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus4: sd0-bus-width4 {
-		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus8: sd0-bus-width8 {
-		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_rdqs: sd0-rdqs {
-		samsung,pins = "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpc1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpc1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pins = "gpc1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus8: sd1-bus-width8 {
-		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_clk: sd2-clk {
-		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_cmd: sd2-cmd {
-		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_cd: sd2-cd {
-		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus1: sd2-bus-width1 {
-		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus4: sd2-bus-width4 {
-		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
-	};
-};
-
-&pinctrl_2 {
-	gpz0: gpz0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpz1: gpz1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/src/arm/exynos5260-xyref5260.dts b/src/arm/exynos5260-xyref5260.dts
deleted file mode 100644
index 8c84ab27c19b..000000000000
--- a/src/arm/exynos5260-xyref5260.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * SAMSUNG XYREF5260 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5260.dtsi"
-
-/ {
-	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
-	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
-
-	memory {
-		reg = <0x20000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	xrtcxti: xrtcxti {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "xrtcxti";
-		#clock-cells = <0>;
-	};
-};
-
-&pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	bypass-smu;
-	supports-highspeed;
-	supports-hs200-mode; /* 200 Mhz */
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	supports-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
-};
diff --git a/src/arm/exynos5260.dtsi b/src/arm/exynos5260.dtsi
deleted file mode 100644
index 36da38e29000..000000000000
--- a/src/arm/exynos5260.dtsi
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * SAMSUNG EXYNOS5260 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "skeleton.dtsi"
-
-#include <dt-bindings/clock/exynos5260-clk.h>
-
-/ {
-	compatible = "samsung,exynos5260", "samsung,exynos5";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			cci-control-port = <&cci_control0>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clock_top: clock-controller@10010000 {
-			compatible = "samsung,exynos5260-clock-top";
-			reg = <0x10010000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_peri: clock-controller@10200000 {
-			compatible = "samsung,exynos5260-clock-peri";
-			reg = <0x10200000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_egl: clock-controller@10600000 {
-			compatible = "samsung,exynos5260-clock-egl";
-			reg = <0x10600000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_kfc: clock-controller@10700000 {
-			compatible = "samsung,exynos5260-clock-kfc";
-			reg = <0x10700000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_g2d: clock-controller@10A00000 {
-			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10A00000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_mif: clock-controller@10CE0000 {
-			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10CE0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_mfc: clock-controller@11090000 {
-			compatible = "samsung,exynos5260-clock-mfc";
-			reg = <0x11090000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_g3d: clock-controller@11830000 {
-			compatible = "samsung,exynos5260-clock-g3d";
-			reg = <0x11830000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_fsys: clock-controller@122E0000 {
-			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122E0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_aud: clock-controller@128C0000 {
-			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128C0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_isp: clock-controller@133C0000 {
-			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133C0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_gscl: clock-controller@13F00000 {
-			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13F00000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_disp: clock-controller@14550000 {
-			compatible = "samsung,exynos5260-clock-disp";
-			reg = <0x14550000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		chipid: chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		mct: mct@100B0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x100B0000 0x1000>;
-			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-					<0 107 0>, <0 122 0>, <0 123 0>,
-					<0 124 0>, <0 125 0>, <0 126 0>,
-					<0 127 0>, <0 128 0>, <0 129 0>;
-		};
-
-		cci: cci@10F00000 {
-			compatible = "arm,cci-400";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10F00000 0x1000>;
-			ranges = <0x0 0x10F00000 0x6000>;
-
-			cci_control0: slave-if@4000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x4000 0x1000>;
-			};
-
-			cci_control1: slave-if@5000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x5000 0x1000>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11600000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x11600000 0x1000>;
-			interrupts = <0 79 0>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <0 32 0>;
-			};
-		};
-
-		pinctrl_1: pinctrl@12290000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x12290000 0x1000>;
-			interrupts = <0 157 0>;
-		};
-
-		pinctrl_2: pinctrl@128B0000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128B0000 0x1000>;
-			interrupts = <0 243 0>;
-		};
-
-		pmu_system_controller: system-controller@10D50000 {
-			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10D50000 0x10000>;
-		};
-
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 146 0>;
-			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 147 0>;
-			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 148 0>;
-			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart3: serial@12860000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12860000 0x100>;
-			interrupts = <0 145 0>;
-			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		mmc_0: mmc@12140000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12140000 0x2000>;
-			interrupts = <0 156 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12150000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12150000 0x2000>;
-			interrupts = <0 158 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12160000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12160000 0x2000>;
-			interrupts = <0 159 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-	};
-};
-
-#include "exynos5260-pinctrl.dtsi"
diff --git a/src/arm/exynos5410-smdk5410.dts b/src/arm/exynos5410-smdk5410.dts
deleted file mode 100644
index 7275bbd6fc4b..000000000000
--- a/src/arm/exynos5410-smdk5410.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * SAMSUNG SMDK5410 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5410.dtsi"
-/ {
-	model = "Samsung SMDK5410 board based on EXYNOS5410";
-	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	firmware@02037000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02037000 0x1000>;
-	};
-
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	supports-highspeed;
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	supports-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
-};
-
-&uart0 {
-		status = "okay";
-};
-
-&uart1 {
-		status = "okay";
-};
-
-&uart2 {
-		status = "okay";
-};
diff --git a/src/arm/exynos5410.dtsi b/src/arm/exynos5410.dtsi
deleted file mode 100644
index 731eefd23fa9..000000000000
--- a/src/arm/exynos5410.dtsi
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * SAMSUNG EXYNOS5410 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
- * EXYNOS5410 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/exynos5410.h>
-
-/ {
-	compatible = "samsung,exynos5410", "samsung,exynos5";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clock-frequency = <1600000000>;
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1600000000>;
-		};
-
-		CPU2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1600000000>;
-		};
-
-		CPU3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1600000000>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		combiner: interrupt-controller@10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			samsung,combiner-nr = <32>;
-			reg = <0x10440000 0x1000>;
-			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5410-pmu", "syscon";
-			reg = <0x10040000 0x5000>;
-		};
-
-		mct: mct@101C0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0xB00>;
-			interrupt-parent = <&interrupt_map>;
-			interrupts = <0>, <1>, <2>, <3>,
-				<4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-			clocks = <&fin_pll>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			interrupt_map: interrupt-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 0>,
-						<5 &gic 0 121 0>,
-						<6 &gic 0 122 0>,
-						<7 &gic 0 123 0>,
-						<8 &gic 0 128 0>,
-						<9 &gic 0 129 0>,
-						<10 &gic 0 130 0>,
-						<11 &gic 0 131 0>;
-			};
-		};
-
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
-		};
-
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5410-clock";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
-		};
-
-		mmc_0: mmc@12200000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12200000 0x1000>;
-			interrupts = <0 75 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12210000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12210000 0x1000>;
-			interrupts = <0 76 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12220000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12220000 0x1000>;
-			interrupts = <0 77 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			status = "disabled";
-		};
-
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 51 0>;
-			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 52 0>;
-			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 53 0>;
-			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/exynos5420-arndale-octa.dts b/src/arm/exynos5420-arndale-octa.dts
deleted file mode 100644
index 434fd9d3e09d..000000000000
--- a/src/arm/exynos5420-arndale-octa.dts
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * Samsung's Exynos5420 based Arndale Octa board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5420.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
-	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
-
-	memory {
-		reg = <0x20000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC3,115200";
-	};
-
-	firmware@02073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	mmc@12200000 {
-		status = "okay";
-		broken-cd;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <0 4>;
-		samsung,dw-mshc-ddr-timing = <0 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-		vmmc-supply = <&ldo10_reg>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc@12220000 {
-		status = "okay";
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		vmmc-supply = <&ldo10_reg>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
-	};
-
-	hsi2c_4: i2c@12CA0000 {
-		status = "okay";
-
-		s2mps11_pmic@66 {
-			compatible = "samsung,s2mps11-pmic";
-			reg = <0x66>;
-			s2mps11,buck2-ramp-delay = <12>;
-			s2mps11,buck34-ramp-delay = <12>;
-			s2mps11,buck16-ramp-delay = <12>;
-			s2mps11,buck6-ramp-enable = <1>;
-			s2mps11,buck2-ramp-enable = <1>;
-			s2mps11,buck3-ramp-enable = <1>;
-			s2mps11,buck4-ramp-enable = <1>;
-
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-
-			s2mps11_osc: clocks {
-				#clock-cells = <1>;
-				clock-output-names = "s2mps11_ap",
-						"s2mps11_cp", "s2mps11_bt";
-			};
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "PVDD_ALIVE_1V0";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "PVDD_APIO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "PVDD_APIO_MMCON_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "PVDD_ADC_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "PVDD_PLL_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "PVDD_ANAIP_1V0";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "PVDD_ANAIP_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "PVDD_ABB_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "PVDD_USB_3V3";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "PVDD_PRE_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "PVDD_USB_1V0";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "PVDD_HSIC_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "PVDD_APIO_MMCOFF_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "PVDD_PERI_2V8";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "PVDD_PERI_3V3";
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-				};
-
-				ldo18_reg: LDO18 {
-					regulator-name = "PVDD_EMMC_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo19_reg: LDO19 {
-					regulator-name = "PVDD_TFLASH_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo20_reg: LDO20 {
-					regulator-name = "PVDD_BTWIFI_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "PVDD_CAM1IO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo23_reg: LDO23 {
-					regulator-name = "PVDD_MIFS_1V1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo24_reg: LDO24 {
-					regulator-name = "PVDD_CAM1_AVDD_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo26_reg: LDO26 {
-					regulator-name = "PVDD_CAM0_AF_2V8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				ldo27_reg: LDO27 {
-					regulator-name = "PVDD_G3DS_1V0";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo28_reg: LDO28 {
-					regulator-name = "PVDD_TSP_3V3";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo29_reg: LDO29 {
-					regulator-name = "PVDD_AUDIO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo31_reg: LDO31 {
-					regulator-name = "PVDD_PERI_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo32_reg: LDO32 {
-					regulator-name = "PVDD_LCD_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo33_reg: LDO33 {
-					regulator-name = "PVDD_CAM0IO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo35_reg: LDO35 {
-					regulator-name = "PVDD_CAM0_DVDD_1V2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo38_reg: LDO38 {
-					regulator-name = "PVDD_CAM0_AVDD_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "PVDD_MIF_1V1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "PVDD_INT_1V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "PVDD_G3D_1V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "PVDD_LPDDR3_1V2";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "PVDD_KFC_1V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "VIN_LLDO_1V4";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "VIN_MLDO_2V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "VIN_HLDO_3V5";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3500000>;
-					regulator-always-on;
-				};
-
-				buck10_reg: BUCK10 {
-					regulator-name = "PVDD_EMMCF_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		wakeup {
-			label = "SW-TACT1";
-			gpios = <&gpx2 7 1>;
-			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
-		};
-	};
-};
diff --git a/src/arm/exynos5420-peach-pit.dts b/src/arm/exynos5420-peach-pit.dts
deleted file mode 100644
index 228a6b1e0aa1..000000000000
--- a/src/arm/exynos5420-peach-pit.dts
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * Google Peach Pit Rev 6+ board device tree source
- *
- * Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "exynos5420.dtsi"
-
-/ {
-	model = "Google Peach Pit Rev 6+";
-
-	compatible = "google,pit-rev16",
-		"google,pit-rev15", "google,pit-rev14",
-		"google,pit-rev13", "google,pit-rev12",
-		"google,pit-rev11", "google,pit-rev10",
-		"google,pit-rev9", "google,pit-rev8",
-		"google,pit-rev7", "google,pit-rev6",
-		"google,pit", "google,peach","samsung,exynos5420",
-		"samsung,exynos5";
-
-	aliases {
-		/* Assign 20 so we don't get confused w/ builtin ones */
-		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq>;
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x80000000>;
-	};
-
-	sound {
-		compatible = "google,snow-audio-max98090";
-
-		samsung,model = "Peach-Pit-I2S-MAX98090";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98090>;
-	};
-
-	usb300_vbus_reg: regulator-usb300 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb300_vbus_en>;
-		enable-active-high;
-	};
-
-	usb301_vbus_reg: regulator-usb301 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb301_vbus_en>;
-		enable-active-high;
-	};
-
-	vbat: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x06>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
-
-	display-timings {
-		native-mode = <&timing1>;
-
-		timing1: timing@1 {
-			clock-frequency = <70589280>;
-			hactive = <1366>;
-			vactive = <768>;
-			hfront-porch = <40>;
-			hback-porch = <40>;
-			hsync-len = <32>;
-			vback-porch = <10>;
-			vfront-porch = <12>;
-			vsync-len = <6>;
-		};
-	};
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	ddc = <&i2c_2>;
-};
-
-&hsi2c_7 {
-	status = "okay";
-
-	max98090: codec@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupts = <2 0>;
-		interrupt-parent = <&gpx0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98090_irq>;
-	};
-};
-
-&hsi2c_9 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-
-		/* Unused irq; but still need to configure the pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpm_irq>;
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x50>;
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	caps2-mmc-hs200-1_8v;
-	supports-highspeed;
-	non-removable;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	supports-highspeed;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mask_tpm_reset>;
-
-	max98090_irq: max98090-irq {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
-		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-		samsung,pin-val = <0>;
-	};
-
-	tpm_irq: tpm-irq {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	power_key_irq: power-key-irq {
-		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	ec_irq: ec-irq {
-		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	tps65090_irq: tps65090-irq {
-		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	dp_hpd_gpio: dp_hpd_gpio {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <2>;
-	};
-
-	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
-		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
-	};
-
-	usb300_vbus_en: usb300-vbus-en {
-		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	usb301_vbus_en: usb301-vbus-en {
-		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&spi_2 {
-	status = "okay";
-	num-cs = <1>;
-	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 0>;
-
-	cros_ec: cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_spi_cs &ec_irq>;
-		reg = <0>;
-		spi-max-frequency = <3125000>;
-
-		controller-data {
-			samsung,spi-feedback-delay = <1>;
-		};
-
-		i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			google,remote-bus = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-				sbs,i2c-retry-count = <2>;
-			};
-
-			power-regulator@48 {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					tps65090_dcdc1: dcdc1 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc2: dcdc2 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc3: dcdc3 {
-						ti,enable-ext-control;
-					};
-					tps65090_fet1: fet1 {
-						regulator-name = "vcd_led";
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-					};
-					tps65090_fet3: fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-					};
-					tps65090_fet4: fet4 {
-						regulator-name = "sdcard";
-						regulator-always-on;
-					};
-					tps65090_fet5: fet5 {
-						regulator-name = "camout";
-					};
-					tps65090_fet6: fet6 {
-						regulator-name = "lcd_vdd";
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-					};
-					tps65090_ldo1: ldo1 {
-					};
-					tps65090_ldo2: ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
-};
-
-&uart_3 {
-	status = "okay";
-};
-
-&usbdrd_phy0 {
-	vbus-supply = <&usb300_vbus_reg>;
-};
-
-&usbdrd_phy1 {
-	vbus-supply = <&usb301_vbus_reg>;
-};
-
-/*
- * Use longest HW watchdog in SoC (32 seconds) since the hardware
- * watchdog provides no debugging information (compared to soft/hard
- * lockup detectors) and so should be last resort.
- */
-&watchdog {
-	timeout-sec = <32>;
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/exynos5420-pinctrl.dtsi b/src/arm/exynos5420-pinctrl.dtsi
deleted file mode 100644
index ba686e40eac7..000000000000
--- a/src/arm/exynos5420-pinctrl.dtsi
+++ /dev/null
@@ -1,715 +0,0 @@
-/*
- * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@13400000 {
-		gpy7: gpy7 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-				     <26 0>, <26 1>, <27 0>, <27 1>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-				     <30 0>, <30 1>, <31 0>, <31 1>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		dp_hpd: dp_hpd {
-			samsung,pins = "gpx0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13410000 {
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc2: gpc2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc3: gpc3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc4: gpc4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpc0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpc0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpc0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpc0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpc1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpc1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpc1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_int: sd1-int {
-			samsung,pins = "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpc1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus8: sd1-bus-width8 {
-			samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpc2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpc2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpc2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpc2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-	};
-
-	pinctrl@14000000 {
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg0: gpg0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg1: gpg1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg2: gpg2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj4: gpj4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		cam_gpio_a: cam-gpio-a {
-			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				       "gpe1-0", "gpe1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_gpio_b: cam-gpio-b {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c2_bus: cam-i2c2-bus {
-			samsung,pins = "gpf0-4", "gpf0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-		cam_spi1_bus: cam-spi1-bus {
-			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c1_bus: cam-i2c1-bus {
-			samsung,pins = "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c0_bus: cam-i2c0-bus {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi0_bus: cam-spi0-bus {
-			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_bayrgb_bus: cam-bayrgb-bus {
-			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-				       "gpg2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@14010000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa2: gpa2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb0: gpb0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb1: gpb1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb2: gpb2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb3: gpb3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb4: gpb4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph0: gph0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_hs_bus: i2c4-hs-bus {
-			samsung,pins = "gpa2-0", "gpa2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_hs_bus: i2c5-hs-bus {
-			samsung,pins = "gpa2-2", "gpa2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpb1-0", "gpb1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_hs_bus: i2c6-hs-bus {
-			samsung,pins = "gpb1-3", "gpb1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpb2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpb2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpb2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpb2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_hs_bus: i2c7-hs-bus {
-			samsung,pins = "gpb2-2", "gpb2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c8_hs_bus: i2c8-hs-bus {
-			samsung,pins = "gpb3-4", "gpb3-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c9_hs_bus: i2c9-hs-bus {
-			samsung,pins = "gpb3-6", "gpb3-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c10_hs_bus: i2c10-hs-bus {
-			samsung,pins = "gpb4-0", "gpb4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-};
diff --git a/src/arm/exynos5420-smdk5420.dts b/src/arm/exynos5420-smdk5420.dts
deleted file mode 100644
index 6052aa9c5659..000000000000
--- a/src/arm/exynos5420-smdk5420.dts
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * SAMSUNG SMDK5420 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5420.dtsi"
-
-/ {
-	model = "Samsung SMDK5420 board based on EXYNOS5420";
-	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
-
-	memory {
-		reg = <0x20000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200 init=/linuxrc";
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd-supply";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		dbvdd: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "dbvdd-supply";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		spkvdd: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "spkvdd-supply";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	mmc@12200000 {
-		status = "okay";
-		broken-cd;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <0 4>;
-		samsung,dw-mshc-ddr-timing = <0 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc@12220000 {
-		status = "okay";
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
-	};
-
-	dp-controller@145B0000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
-		status = "okay";
-	};
-
-	fimd@14400000 {
-		status = "okay";
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing@0 {
-				clock-frequency = <50000>;
-				hactive = <2560>;
-				vactive = <1600>;
-				hfront-porch = <48>;
-				hback-porch = <80>;
-				hsync-len = <32>;
-				vback-porch = <16>;
-				vfront-porch = <8>;
-				vsync-len = <6>;
-			};
-		};
-	};
-
-	pinctrl@13400000 {
-		hdmi_hpd_irq: hdmi-hpd-irq {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@14000000 {
-		usb300_vbus_en: usb300-vbus-en {
-			samsung,pins = "gpg0-5";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		usb301_vbus_en: usb301-vbus-en {
-			samsung,pins = "gpg1-4";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	hdmi@14530000 {
-		status = "okay";
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_irq>;
-	};
-
-	usb300_vbus_reg: regulator-usb300 {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg0 5 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb300_vbus_en>;
-		enable-active-high;
-	};
-
-	usb301_vbus_reg: regulator-usb301 {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg1 4 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb301_vbus_en>;
-		enable-active-high;
-	};
-
-	phy@12100000 {
-		vbus-supply = <&usb300_vbus_reg>;
-	};
-
-	phy@12500000 {
-		vbus-supply = <&usb301_vbus_reg>;
-	};
-
-	i2c_2: i2c@12C80000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		status = "okay";
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	hsi2c_4: i2c@12CA0000 {
-		status = "okay";
-
-		s2mps11_pmic@66 {
-			compatible = "samsung,s2mps11-pmic";
-			reg = <0x66>;
-			s2mps11,buck2-ramp-delay = <12>;
-			s2mps11,buck34-ramp-delay = <12>;
-			s2mps11,buck16-ramp-delay = <12>;
-			s2mps11,buck6-ramp-enable = <1>;
-			s2mps11,buck2-ramp-enable = <1>;
-			s2mps11,buck3-ramp-enable = <1>;
-			s2mps11,buck4-ramp-enable = <1>;
-
-			s2mps11_osc: clocks {
-				#clock-cells = <1>;
-				clock-output-names = "s2mps11_ap",
-						"s2mps11_cp", "s2mps11_bt";
-			};
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "vdd_ldo1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "vdd_ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "vdd_ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "vdd_ldo6";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "vdd_ldo7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "vdd_ldo8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "vdd_ldo9";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "vdd_ldo10";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "vdd_ldo11";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "vdd_ldo12";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "vdd_ldo13";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "vdd_ldo15";
-					regulator-min-microvolt = <3100000>;
-					regulator-max-microvolt = <3100000>;
-					regulator-always-on;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "vdd_ldo16";
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					regulator-always-on;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "tsp_avdd";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo19_reg: LDO19 {
-					regulator-name = "vdd_sd";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo24_reg: LDO24 {
-					regulator-name = "tsp_io";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "vdd_mem";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "vdd_kfc";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "vdd_1.0v_ldo";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "vdd_1.8v_ldo";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "vdd_2.8v_ldo";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3750000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck10_reg: BUCK10 {
-					regulator-name = "vdd_vmem";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/exynos5420.dtsi b/src/arm/exynos5420.dtsi
deleted file mode 100644
index bfe056d9148c..000000000000
--- a/src/arm/exynos5420.dtsi
+++ /dev/null
@@ -1,901 +0,0 @@
-/*
- * SAMSUNG EXYNOS5420 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
- * EXYNOS5420 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/exynos5420.h>
-#include "exynos5.dtsi"
-#include "exynos5420-pinctrl.dtsi"
-
-#include <dt-bindings/clock/exynos-audss-clk.h>
-
-/ {
-	compatible = "samsung,exynos5420", "samsung,exynos5";
-
-	aliases {
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		pinctrl4 = &pinctrl_4;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
-		i2c8 = &hsi2c_8;
-		i2c9 = &hsi2c_9;
-		i2c10 = &hsi2c_10;
-		gsc0 = &gsc_0;
-		gsc1 = &gsc_1;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		usbdrdphy0 = &usbdrd_phy0;
-		usbdrdphy1 = &usbdrd_phy1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
-		};
-	};
-
-	cci@10d20000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x10d20000 0x1000>;
-		ranges = <0x0 0x10d20000 0x6000>;
-
-		cci_control0: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
-		};
-		cci_control1: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
-		};
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x54000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x54000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@53000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x53000 0x1000>;
-		};
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5420-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
-
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5420-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
-			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
-
-	mfc: codec@11000000 {
-		compatible = "samsung,mfc-v7";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		samsung,power-domain = <&mfc_pd>;
-	};
-
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x2000>;
-		clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
-
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x2000>;
-		clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
-
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5420-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
-
-	mct: mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrups-cells = <1>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &combiner 23 3>,
-					<1 &combiner 23 4>,
-					<2 &combiner 25 2>,
-					<3 &combiner 25 3>,
-					<4 &gic 0 120 0>,
-					<5 &gic 0 121 0>,
-					<6 &gic 0 122 0>,
-					<7 &gic 0 123 0>,
-					<8 &gic 0 128 0>,
-					<9 &gic 0 129 0>,
-					<10 &gic 0 130 0>,
-					<11 &gic 0 131 0>;
-		};
-	};
-
-	gsc_pd: power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-	};
-
-	isp_pd: power-domain@10044020 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044020 0x20>;
-	};
-
-	mfc_pd: power-domain@10044060 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044060 0x20>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
-			<&clock CLK_MOUT_USER_ACLK333>;
-		clock-names = "oscclk", "pclk0", "clk0";
-	};
-
-	msc_pd: power-domain@10044120 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044120 0x20>;
-	};
-
-	pinctrl_0: pinctrl@13400000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-	pinctrl_1: pinctrl@13410000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13410000 0x1000>;
-		interrupts = <0 78 0>;
-	};
-
-	pinctrl_2: pinctrl@14000000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14000000 0x1000>;
-		interrupts = <0 46 0>;
-	};
-
-	pinctrl_3: pinctrl@14010000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14010000 0x1000>;
-		interrupts = <0 50 0>;
-	};
-
-	pinctrl_4: pinctrl@03860000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	rtc: rtc@101E0000 {
-		clocks = <&clock CLK_RTC>;
-		clock-names = "rtc";
-		status = "disabled";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-
-		adma: adma@03880000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x03880000 0x1000>;
-			interrupts = <0 110 0>;
-			clocks = <&clock_audss EXYNOS_ADMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <6>;
-			#dma-requests = <16>;
-		};
-
-		pdma0: pdma@121A0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
-			clocks = <&clock CLK_PDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		pdma1: pdma@121B0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
-			clocks = <&clock CLK_PDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
-		};
-
-		mdma0: mdma@10800000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
-			clocks = <&clock CLK_MDMA0>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		mdma1: mdma@11C10000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
-			clocks = <&clock CLK_MDMA1>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-			/*
-			 * MDMA1 can support both secure and non-secure
-			 * AXI transactions. When this is enabled in the kernel
-			 * for boards that run in secure mode, we are getting
-			 * imprecise external aborts causing the kernel to oops.
-			 */
-			status = "disabled";
-		};
-	};
-
-	i2s0: i2s@03830000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x03830000 0x100>;
-		dmas = <&adma 0
-			&adma 2
-			&adma 1>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-		status = "disabled";
-	};
-
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-		status = "disabled";
-	};
-
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-		status = "disabled";
-	};
-
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 69 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 70 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	uart_0: serial@12C00000 {
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	uart_1: serial@12C10000 {
-		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	uart_2: serial@12C20000 {
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	uart_3: serial@12C30000 {
-		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
-	dp_phy: video-phy@10040728 {
-		compatible = "samsung,exynos5250-dp-video-phy";
-		reg = <0x10040728 4>;
-		#phy-cells = <0>;
-	};
-
-	dp: dp-controller@145B0000 {
-		clocks = <&clock CLK_DP1>;
-		clock-names = "dp";
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
-
-	mipi_phy: video-phy@10040714 {
-		compatible = "samsung,s5pv210-mipi-video-phy";
-		reg = <0x10040714 12>;
-		#phy-cells = <1>;
-	};
-
-	dsi@14500000 {
-		compatible = "samsung,exynos5410-mipi-dsi";
-		reg = <0x14500000 0x10000>;
-		interrupts = <0 82 0>;
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
-		clock-names = "bus_clk", "pll_clk";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	fimd: fimd@14400000 {
-		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-		clock-names = "sclk_fimd", "fimd";
-	};
-
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v2";
-		reg = <0x12D10000 0x100>, <0x10040720 0x4>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_TSADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		status = "disabled";
-	};
-
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		status = "disabled";
-	};
-
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "disabled";
-	};
-
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		status = "disabled";
-	};
-
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		status = "disabled";
-	};
-
-	hsi2c_4: i2c@12CA0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CA0000 0x1000>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock CLK_USI0>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_5: i2c@12CB0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CB0000 0x1000>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock CLK_USI1>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_6: i2c@12CC0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CC0000 0x1000>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock CLK_USI2>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_7: i2c@12CD0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CD0000 0x1000>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock CLK_USI3>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_8: i2c@12E00000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E00000 0x1000>;
-		interrupts = <0 87 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock CLK_USI4>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_9: i2c@12E10000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E10000 0x1000>;
-		interrupts = <0 88 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock CLK_USI5>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hsi2c_10: i2c@12E20000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E20000 0x1000>;
-		interrupts = <0 203 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock CLK_USI6>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
-
-	hdmi: hdmi@14530000 {
-		compatible = "samsung,exynos5420-hdmi";
-		reg = <0x14530000 0x70000>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-			"sclk_hdmiphy", "mout_hdmi";
-		phy = <&hdmiphy>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
-
-	hdmiphy: hdmiphy@145D0000 {
-		reg = <0x145D0000 0x20>;
-	};
-
-	mixer: mixer@14450000 {
-		compatible = "samsung,exynos5420-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "sclk_hdmi";
-	};
-
-	gsc_0: video-scaler@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		samsung,power-domain = <&gsc_pd>;
-	};
-
-	gsc_1: video-scaler@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-		samsung,power-domain = <&gsc_pd>;
-	};
-
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5420-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-	};
-
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
-	tmu_cpu0: tmu@10060000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-	};
-
-	tmu_cpu1: tmu@10064000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10064000 0x100>;
-		interrupts = <0 183 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-	};
-
-	tmu_cpu2: tmu@10068000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-		interrupts = <0 184 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-	};
-
-	tmu_cpu3: tmu@1006c000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-		interrupts = <0 185 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-	};
-
-	tmu_gpu: tmu@100a0000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-		interrupts = <0 215 0>;
-		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-	};
-
-        watchdog: watchdog@101D0000 {
-		compatible = "samsung,exynos5420-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-        };
-
-	sss: sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
-
-	usbdrd3_0: usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD300>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dwc3 {
-			compatible = "snps,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-			phy-names = "usb2-phy", "usb3-phy";
-		};
-	};
-
-	usbdrd_phy0: phy@12100000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	usbdrd3_1: usb@12400000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD301>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dwc3 {
-			compatible = "snps,dwc3";
-			reg = <0x12400000 0x10000>;
-			interrupts = <0 73 0>;
-			phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-			phy-names = "usb2-phy", "usb3-phy";
-		};
-	};
-
-	usbdrd_phy1: phy@12500000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12500000 0x100>;
-		clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	usbhost2: usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
-		};
-	};
-
-	usbhost1: usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
-		};
-	};
-
-	usb2_phy: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
-};
diff --git a/src/arm/exynos5440-sd5v1.dts b/src/arm/exynos5440-sd5v1.dts
deleted file mode 100644
index 268609a42b2c..000000000000
--- a/src/arm/exynos5440-sd5v1.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * SAMSUNG SD5v1 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-
-/ {
-	model = "SAMSUNG SD5v1 board based on EXYNOS5440";
-	compatible = "samsung,sd5v1", "samsung,exynos5440", "samsung,exynos5";
-
-	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
-	};
-
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
-		};
-	};
-
-	gmac: ethernet@00230000 {
-		fixed_phy;
-		phy_addr = <1>;
-	};
-
-	spi {
-		status = "disabled";
-	};
-
-};
diff --git a/src/arm/exynos5440-ssdk5440.dts b/src/arm/exynos5440-ssdk5440.dts
deleted file mode 100644
index ff55dac6e219..000000000000
--- a/src/arm/exynos5440-ssdk5440.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * SAMSUNG SSDK5440 board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-
-/ {
-	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
-	compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5";
-
-	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
-	};
-
-	spi_0: spi@D0000 {
-
-		flash: w25q128@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "winbond,w25q128";
-			spi-max-frequency = <15625000>;
-			reg = <0>;
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
-			};
-
-			partition@00000 {
-				label = "BootLoader";
-				reg = <0x60000 0x80000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "Recovery-Kernel";
-				reg = <0xe0000 0x300000>;
-				read-only;
-			};
-
-			partition@3e0000 {
-				label = "CRAM-FS";
-				reg = <0x3e0000 0x700000>;
-				read-only;
-			};
-
-			partition@ae0000 {
-				label = "User-Data";
-				reg = <0xae0000 0x520000>;
-			};
-
-		};
-
-	};
-
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
-		};
-	};
-
-	pcie@290000 {
-		reset-gpio = <&pin_ctrl 5 0>;
-		status = "okay";
-	};
-
-	pcie@2a0000 {
-		reset-gpio = <&pin_ctrl 22 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/exynos5440.dtsi b/src/arm/exynos5440.dtsi
deleted file mode 100644
index 8f3373cd7b87..000000000000
--- a/src/arm/exynos5440.dtsi
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * SAMSUNG EXYNOS5440 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/clock/exynos5440.h>
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "samsung,exynos5440", "samsung,exynos5";
-
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		spi0 = &spi_0;
-		tmuctrl0 = &tmuctrl_0;
-		tmuctrl1 = &tmuctrl_1;
-		tmuctrl2 = &tmuctrl_2;
-	};
-
-	clock: clock-controller@160000 {
-		compatible = "samsung,exynos5440-clock";
-		reg = <0x160000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	gic: interrupt-controller@2E0000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x2E1000 0x1000>,
-			<0x2E2000 0x1000>,
-			<0x2E4000 0x2000>,
-			<0x2E6000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
-		interrupts = <0 52 4>,
-			     <0 53 4>,
-			     <0 54 4>,
-			     <0 55 4>;
-	};
-
-	timer {
-		compatible = "arm,cortex-a15-timer",
-			     "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		clock-frequency = <50000000>;
-	};
-
-	cpufreq@160000 {
-		compatible = "samsung,exynos5440-cpufreq";
-		reg = <0x160000 0x1000>;
-		interrupts = <0 57 0>;
-		operating-points = <
-				/* KHz	  uV */
-				1500000 1100000
-				1400000 1075000
-				1300000 1050000
-				1200000 1025000
-				1100000 1000000
-				1000000 975000
-				900000  950000
-				800000  925000
-		>;
-	};
-
-	serial_0: serial@B0000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0xB0000 0x1000>;
-		interrupts = <0 2 0>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial_1: serial@C0000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0xC0000 0x1000>;
-		interrupts = <0 3 0>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	spi_0: spi@D0000 {
-		compatible = "samsung,exynos5440-spi";
-		reg = <0xD0000 0x100>;
-		interrupts = <0 4 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,spi-src-clk = <0>;
-		num-cs = <1>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
-		clock-names = "spi", "spi_busclk0";
-	};
-
-	pin_ctrl: pinctrl {
-		compatible = "samsung,exynos5440-pinctrl";
-		reg = <0xE0000 0x1000>;
-		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
-			     <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#gpio-cells = <2>;
-
-		fan: fan {
-			samsung,exynos5440-pin-function = <1>;
-		};
-
-		hdd_led0: hdd_led0 {
-			samsung,exynos5440-pin-function = <2>;
-		};
-
-		hdd_led1: hdd_led1 {
-			samsung,exynos5440-pin-function = <3>;
-		};
-
-		uart1: uart1 {
-			samsung,exynos5440-pin-function = <4>;
-		};
-	};
-
-	i2c@F0000 {
-		compatible = "samsung,exynos5440-i2c";
-		reg = <0xF0000 0x1000>;
-		interrupts = <0 5 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "i2c";
-	};
-
-	i2c@100000 {
-		compatible = "samsung,exynos5440-i2c";
-		reg = <0x100000 0x1000>;
-		interrupts = <0 6 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "i2c";
-	};
-
-	watchdog@110000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x110000 0x1000>;
-		interrupts = <0 1 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "watchdog";
-	};
-
-	gmac: ethernet@00230000 {
-		compatible = "snps,dwmac-3.70a";
-		reg = <0x00230000 0x8000>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 31 4>;
-		interrupt-names = "macirq";
-		phy-mode = "sgmii";
-		clocks = <&clock CLK_GMAC0>;
-		clock-names = "stmmaceth";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-	};
-
-	rtc {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x130000 0x1000>;
-		interrupts = <0 17 0>, <0 16 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "rtc";
-	};
-
-	tmuctrl_0: tmuctrl@160118 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160118 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-	};
-
-	tmuctrl_1: tmuctrl@16011C {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x16011C 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-	};
-
-	tmuctrl_2: tmuctrl@160120 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160120 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-	};
-
-	sata@210000 {
-		compatible = "snps,exynos5440-ahci";
-		reg = <0x210000 0x10000>;
-		interrupts = <0 30 0>;
-		clocks = <&clock CLK_SATA>;
-		clock-names = "sata";
-	};
-
-	ohci@220000 {
-		compatible = "samsung,exynos5440-ohci";
-		reg = <0x220000 0x1000>;
-		interrupts = <0 29 0>;
-		clocks = <&clock CLK_USB>;
-		clock-names = "usbhost";
-	};
-
-	ehci@221000 {
-		compatible = "samsung,exynos5440-ehci";
-		reg = <0x221000 0x1000>;
-		interrupts = <0 29 0>;
-		clocks = <&clock CLK_USB>;
-		clock-names = "usbhost";
-	};
-
-	pcie@290000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x290000 0x1000
-			0x270000 0x1000
-			0x271000 0x40>;
-		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
-		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
-			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 53>;
-		num-lanes = <4>;
-		status = "disabled";
-	};
-
-	pcie@2a0000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x2a0000 0x1000
-			0x272000 0x1000
-			0x271040 0x40>;
-		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
-		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
-			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 56>;
-		num-lanes = <4>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/exynos5800-peach-pi.dts b/src/arm/exynos5800-peach-pi.dts
deleted file mode 100644
index f3ee48bbe05f..000000000000
--- a/src/arm/exynos5800-peach-pi.dts
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * Google Peach Pi Rev 10+ board device tree source
- *
- * Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "exynos5800.dtsi"
-
-/ {
-	model = "Google Peach Pi Rev 10+";
-
-	compatible = "google,pi-rev16",
-		"google,pi-rev15", "google,pi-rev14",
-		"google,pi-rev13", "google,pi-rev12",
-		"google,pi-rev11", "google,pi-rev10",
-		"google,pi", "google,peach", "samsung,exynos5800",
-		"samsung,exynos5";
-
-	aliases {
-		/* Assign 20 so we don't get confused w/ builtin ones */
-		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq>;
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	memory {
-		reg = <0x20000000 0x80000000>;
-	};
-
-	sound {
-		compatible = "google,snow-audio-max98091";
-
-		samsung,model = "Peach-Pi-I2S-MAX98091";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98091>;
-	};
-
-	usb300_vbus_reg: regulator-usb300 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb300_vbus_en>;
-		enable-active-high;
-	};
-
-	usb301_vbus_reg: regulator-usb301 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb301_vbus_en>;
-		enable-active-high;
-	};
-
-	vbat: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd_gpio>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
-
-	display-timings {
-		native-mode = <&timing1>;
-
-		timing1: timing@1 {
-			clock-frequency = <150660000>;
-			hactive = <1920>;
-			vactive = <1080>;
-			hfront-porch = <60>;
-			hback-porch = <172>;
-			hsync-len = <80>;
-			vback-porch = <25>;
-			vfront-porch = <10>;
-			vsync-len = <10>;
-		};
-	};
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	ddc = <&i2c_2>;
-};
-
-&hsi2c_7 {
-	status = "okay";
-
-	max98091: codec@10 {
-		compatible = "maxim,max98091";
-		reg = <0x10>;
-		interrupts = <2 0>;
-		interrupt-parent = <&gpx0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max98091_irq>;
-	};
-};
-
-&hsi2c_9 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-
-		/* Unused irq; but still need to configure the pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpm_irq>;
-	};
-};
-
-&i2c_2 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x50>;
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	caps2-mmc-hs200-1_8v;
-	supports-highspeed;
-	non-removable;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <8>;
-	};
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	supports-highspeed;
-	card-detect-delay = <200>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-	};
-};
-
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mask_tpm_reset>;
-
-	max98091_irq: max98091-irq {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
-		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-		samsung,pin-val = <0>;
-	};
-
-	tpm_irq: tpm-irq {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	power_key_irq: power-key-irq {
-		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	ec_irq: ec-irq {
-		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	tps65090_irq: tps65090-irq {
-		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	dp_hpd_gpio: dp_hpd_gpio {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <2>;
-	};
-
-	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
-		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
-	};
-
-	usb300_vbus_en: usb300-vbus-en {
-		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	usb301_vbus_en: usb301-vbus-en {
-		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&spi_2 {
-	status = "okay";
-	num-cs = <1>;
-	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 0>;
-
-	cros_ec: cros-ec@0 {
-		compatible = "google,cros-ec-spi";
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_spi_cs &ec_irq>;
-		reg = <0>;
-		spi-max-frequency = <3125000>;
-
-		controller-data {
-			samsung,spi-feedback-delay = <1>;
-		};
-
-		i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			google,remote-bus = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-				sbs,i2c-retry-count = <2>;
-			};
-
-			power-regulator@48 {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					tps65090_dcdc1: dcdc1 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc2: dcdc2 {
-						ti,enable-ext-control;
-					};
-					tps65090_dcdc3: dcdc3 {
-						ti,enable-ext-control;
-					};
-					tps65090_fet1: fet1 {
-						regulator-name = "vcd_led";
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-					};
-					tps65090_fet3: fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-					};
-					tps65090_fet4: fet4 {
-						regulator-name = "sdcard";
-						regulator-always-on;
-					};
-					tps65090_fet5: fet5 {
-						regulator-name = "camout";
-					};
-					tps65090_fet6: fet6 {
-						regulator-name = "lcd_vdd";
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-					};
-					tps65090_ldo1: ldo1 {
-					};
-					tps65090_ldo2: ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
-};
-
-&uart_3 {
-	status = "okay";
-};
-
-&usbdrd_phy0 {
-	vbus-supply = <&usb300_vbus_reg>;
-};
-
-&usbdrd_phy1 {
-	vbus-supply = <&usb301_vbus_reg>;
-};
-
-/*
- * Use longest HW watchdog in SoC (32 seconds) since the hardware
- * watchdog provides no debugging information (compared to soft/hard
- * lockup detectors) and so should be last resort.
- */
-&watchdog {
-	timeout-sec = <32>;
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/exynos5800.dtsi b/src/arm/exynos5800.dtsi
deleted file mode 100644
index c0bb3563cac1..000000000000
--- a/src/arm/exynos5800.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * SAMSUNG EXYNOS5800 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
- * EXYNOS5800 based board files can include this file and provide
- * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "exynos5420.dtsi"
-
-/ {
-	compatible = "samsung,exynos5800", "samsung,exynos5";
-};
-
-&clock {
-	compatible = "samsung,exynos5800-clock";
-};
-
-&mfc {
-	compatible = "samsung,mfc-v8";
-};
diff --git a/src/arm/hi3620-hi4511.dts b/src/arm/hi3620-hi4511.dts
deleted file mode 100644
index fe623928f687..000000000000
--- a/src/arm/hi3620-hi4511.dts
+++ /dev/null
@@ -1,649 +0,0 @@
-/*
- *  Copyright (C) 2012-2013 Linaro Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "hi3620.dtsi"
-
-/ {
-	model = "Hisilicon Hi4511 Development Board";
-	compatible = "hisilicon,hi3620-hi4511";
-
-	chosen {
-		bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	amba {
-		dual_timer0: dual_timer@800000 {
-			status = "ok";
-		};
-
-		uart0: uart@b00000 {	/* console */
-			pinctrl-names = "default", "idle";
-			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
-			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
-			status = "ok";
-		};
-
-		uart1: uart@b01000 { /* modem */
-			pinctrl-names = "default", "idle";
-			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
-			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
-			status = "ok";
-		};
-
-		uart2: uart@b02000 { /* audience */
-			pinctrl-names = "default", "idle";
-			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
-			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
-			status = "ok";
-		};
-
-		uart3: uart@b03000 {
-			pinctrl-names = "default", "idle";
-			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
-			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
-			status = "ok";
-		};
-
-		uart4: uart@b04000 {
-			pinctrl-names = "default", "idle";
-			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
-			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
-			status = "ok";
-		};
-
-		pmx0: pinmux@803000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&board_pmx_pins>;
-
-			board_pmx_pins: board_pmx_pins {
-				pinctrl-single,pins = <
-					0x008 0x0	/* GPIO -- eFUSE_DOUT */
-					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
-				>;
-			};
-			uart0_pmx_func: uart0_pmx_func {
-				pinctrl-single,pins = <
-					0x0f0 0x0
-					0x0f4 0x0	/* UART0_RX & UART0_TX */
-				>;
-			};
-			uart0_pmx_idle: uart0_pmx_idle {
-				pinctrl-single,pins = <
-					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
-					0x0f4 0x1	/* UART0_RX & UART0_TX */
-				>;
-			};
-			uart1_pmx_func: uart1_pmx_func {
-				pinctrl-single,pins = <
-					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
-					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
-				>;
-			};
-			uart1_pmx_idle: uart1_pmx_idle {
-				pinctrl-single,pins = <
-					0x0f8 0x1	/* GPIO (IOMG61) */
-					0x0fc 0x1	/* GPIO (IOMG62) */
-				>;
-			};
-			uart2_pmx_func: uart2_pmx_func {
-				pinctrl-single,pins = <
-					0x104 0x2	/* UART2_RXD (IOMG96) */
-					0x108 0x2	/* UART2_TXD (IOMG64) */
-				>;
-			};
-			uart2_pmx_idle: uart2_pmx_idle {
-				pinctrl-single,pins = <
-					0x104 0x1	/* GPIO (IOMG96) */
-					0x108 0x1	/* GPIO (IOMG64) */
-				>;
-			};
-			uart3_pmx_func: uart3_pmx_func {
-				pinctrl-single,pins = <
-					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
-					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
-				>;
-			};
-			uart3_pmx_idle: uart3_pmx_idle {
-				pinctrl-single,pins = <
-					0x160 0x1	/* GPIO (IOMG85) */
-					0x164 0x1	/* GPIO (IOMG86) */
-				>;
-			};
-			uart4_pmx_func: uart4_pmx_func {
-				pinctrl-single,pins = <
-					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
-					0x16c 0x0	/* UART4_RXD (IOMG88) */
-					0x170 0x0	/* UART4_TXD (IOMG93) */
-				>;
-			};
-			uart4_pmx_idle: uart4_pmx_idle {
-				pinctrl-single,pins = <
-					0x168 0x1	/* GPIO (IOMG87) */
-					0x16c 0x1	/* GPIO (IOMG88) */
-					0x170 0x1	/* GPIO (IOMG93) */
-				>;
-			};
-			i2c0_pmx_func: i2c0_pmx_func {
-				pinctrl-single,pins = <
-					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
-				>;
-			};
-			i2c0_pmx_idle: i2c0_pmx_idle {
-				pinctrl-single,pins = <
-					0x0b4 0x1	/* GPIO (IOMG45) */
-				>;
-			};
-			i2c1_pmx_func: i2c1_pmx_func {
-				pinctrl-single,pins = <
-					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
-				>;
-			};
-			i2c1_pmx_idle: i2c1_pmx_idle {
-				pinctrl-single,pins = <
-					0x0b8 0x1	/* GPIO (IOMG46) */
-				>;
-			};
-			i2c2_pmx_func: i2c2_pmx_func {
-				pinctrl-single,pins = <
-					0x068 0x0	/* I2C2_SCL (IOMG26) */
-					0x06c 0x0	/* I2C2_SDA (IOMG27) */
-				>;
-			};
-			i2c2_pmx_idle: i2c2_pmx_idle {
-				pinctrl-single,pins = <
-					0x068 0x1	/* GPIO (IOMG26) */
-					0x06c 0x1	/* GPIO (IOMG27) */
-				>;
-			};
-			i2c3_pmx_func: i2c3_pmx_func {
-				pinctrl-single,pins = <
-					0x050 0x2	/* I2C3_SCL (IOMG20) */
-					0x054 0x2	/* I2C3_SDA (IOMG21) */
-				>;
-			};
-			i2c3_pmx_idle: i2c3_pmx_idle {
-				pinctrl-single,pins = <
-					0x050 0x1	/* GPIO (IOMG20) */
-					0x054 0x1	/* GPIO (IOMG21) */
-				>;
-			};
-			spi0_pmx_func: spi0_pmx_func {
-				pinctrl-single,pins = <
-					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
-					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
-					0x0dc 0x0	/* SPI0_CS1 (IOMG55) */
-					0x0e0 0x0	/* SPI0_CS2 (IOMG56) */
-					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
-				>;
-			};
-			spi0_pmx_idle: spi0_pmx_idle {
-				pinctrl-single,pins = <
-					0x0d4 0x1	/* GPIO (IOMG53) */
-					0x0d8 0x1	/* GPIO (IOMG54) */
-					0x0dc 0x1	/* GPIO (IOMG55) */
-					0x0e0 0x1	/* GPIO (IOMG56) */
-					0x0e4 0x1	/* GPIO (IOMG57) */
-				>;
-			};
-			spi1_pmx_func: spi1_pmx_func {
-				pinctrl-single,pins = <
-					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
-					0x0e8 0x0	/* SPI1_DO (IOMG58) */
-					0x0ec 0x0	/* SPI1_CS (IOMG95) */
-				>;
-			};
-			spi1_pmx_idle: spi1_pmx_idle {
-				pinctrl-single,pins = <
-					0x184 0x1	/* GPIO (IOMG98) */
-					0x0e8 0x1	/* GPIO (IOMG58) */
-					0x0ec 0x1	/* GPIO (IOMG95) */
-				>;
-			};
-			kpc_pmx_func: kpc_pmx_func {
-				pinctrl-single,pins = <
-					0x12c 0x0	/* KEY_IN0 (IOMG73) */
-					0x130 0x0	/* KEY_IN1 (IOMG74) */
-					0x134 0x0	/* KEY_IN2 (IOMG75) */
-					0x10c 0x0	/* KEY_OUT0 (IOMG65) */
-					0x110 0x0	/* KEY_OUT1 (IOMG66) */
-					0x114 0x0	/* KEY_OUT2 (IOMG67) */
-				>;
-			};
-			kpc_pmx_idle: kpc_pmx_idle {
-				pinctrl-single,pins = <
-					0x12c 0x1	/* GPIO (IOMG73) */
-					0x130 0x1	/* GPIO (IOMG74) */
-					0x134 0x1	/* GPIO (IOMG75) */
-					0x10c 0x1	/* GPIO (IOMG65) */
-					0x110 0x1	/* GPIO (IOMG66) */
-					0x114 0x1	/* GPIO (IOMG67) */
-				>;
-			};
-			gpio_key_func: gpio_key_func {
-				pinctrl-single,pins = <
-					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
-					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
-				>;
-			};
-			emmc_pmx_func: emmc_pmx_func {
-				pinctrl-single,pins = <
-					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
-					0x018 0x0	/* NAND_CS3_N (IOMG6) */
-					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
-					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
-					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
-				>;
-			};
-			emmc_pmx_idle: emmc_pmx_idle {
-				pinctrl-single,pins = <
-					0x030 0x0	/* GPIO (IOMG12) */
-					0x018 0x1	/* GPIO (IOMG6) */
-					0x024 0x1	/* GPIO (IOMG8) */
-					0x028 0x1	/* GPIO (IOMG9) */
-					0x02c 0x1	/* GPIO (IOMG10) */
-				>;
-			};
-			sd_pmx_func: sd_pmx_func {
-				pinctrl-single,pins = <
-					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
-					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
-				>;
-			};
-			sd_pmx_idle: sd_pmx_idle {
-				pinctrl-single,pins = <
-					0x0bc 0x1	/* GPIO (IOMG47) */
-					0x0c0 0x1	/* GPIO (IOMG48) */
-				>;
-			};
-			nand_pmx_func: nand_pmx_func {
-				pinctrl-single,pins = <
-					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
-					0x010 0x0	/* NAND_CS1_N (IOMG4) */
-					0x014 0x0	/* NAND_CS2_N (IOMG5) */
-					0x018 0x0	/* NAND_CS3_N (IOMG6) */
-					0x01c 0x0	/* NAND_BUSY0_N (IOMG94) */
-					0x020 0x0	/* NAND_BUSY1_N (IOMG7) */
-					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
-					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
-					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
-				>;
-			};
-			nand_pmx_idle: nand_pmx_idle {
-				pinctrl-single,pins = <
-					0x00c 0x1	/* GPIO (IOMG3) */
-					0x010 0x1	/* GPIO (IOMG4) */
-					0x014 0x1	/* GPIO (IOMG5) */
-					0x018 0x1	/* GPIO (IOMG6) */
-					0x01c 0x1	/* GPIO (IOMG94) */
-					0x020 0x1	/* GPIO (IOMG7) */
-					0x024 0x1	/* GPIO (IOMG8) */
-					0x028 0x1	/* GPIO (IOMG9) */
-					0x02c 0x1	/* GPIO (IOMG10) */
-				>;
-			};
-			sdio_pmx_func: sdio_pmx_func {
-				pinctrl-single,pins = <
-					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
-				>;
-			};
-			sdio_pmx_idle: sdio_pmx_idle {
-				pinctrl-single,pins = <
-					0x0c4 0x1	/* GPIO (IOMG49) */
-				>;
-			};
-			audio_out_pmx_func: audio_out_pmx_func {
-				pinctrl-single,pins = <
-					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
-				>;
-			};
-		};
-
-		pmx1: pinmux@803800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
-					&board_np_pins &board_ps_pins &kpc_cfg_func
-					&audio_out_cfg_func>;
-			board_pu_pins: board_pu_pins {
-				pinctrl-single,pins = <
-					0x014 0		/* GPIO_158 (IOCFG2) */
-					0x018 0		/* GPIO_159 (IOCFG3) */
-					0x01c 0		/* BOOT_MODE0 (IOCFG4) */
-					0x020 0		/* BOOT_MODE1 (IOCFG5) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-			};
-			board_pd_pins: board_pd_pins {
-				pinctrl-single,pins = <
-					0x038 0		/* eFUSE_DOUT (IOCFG11) */
-					0x150 0		/* ISP_GPIO8 (IOCFG93) */
-					0x154 0		/* ISP_GPIO9 (IOCFG94) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			board_pd_ps_pins: board_pd_ps_pins {
-				pinctrl-single,pins = <
-					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
-					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			board_np_pins: board_np_pins {
-				pinctrl-single,pins = <
-					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			board_ps_pins: board_ps_pins {
-				pinctrl-single,pins = <
-					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
-					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
-				>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			uart0_cfg_func: uart0_cfg_func {
-				pinctrl-single,pins = <
-					0x208 0		/* UART0_RXD (IOCFG138) */
-					0x20c 0		/* UART0_TXD (IOCFG139) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart0_cfg_idle: uart0_cfg_idle {
-				pinctrl-single,pins = <
-					0x208 0		/* UART0_RXD (IOCFG138) */
-					0x20c 0		/* UART0_TXD (IOCFG139) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart1_cfg_func: uart1_cfg_func {
-				pinctrl-single,pins = <
-					0x210 0		/* UART1_CTS (IOCFG140) */
-					0x214 0		/* UART1_RTS (IOCFG141) */
-					0x218 0		/* UART1_RXD (IOCFG142) */
-					0x21c 0		/* UART1_TXD (IOCFG143) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart1_cfg_idle: uart1_cfg_idle {
-				pinctrl-single,pins = <
-					0x210 0		/* UART1_CTS (IOCFG140) */
-					0x214 0		/* UART1_RTS (IOCFG141) */
-					0x218 0		/* UART1_RXD (IOCFG142) */
-					0x21c 0		/* UART1_TXD (IOCFG143) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart2_cfg_func: uart2_cfg_func {
-				pinctrl-single,pins = <
-					0x220 0		/* UART2_CTS (IOCFG144) */
-					0x224 0		/* UART2_RTS (IOCFG145) */
-					0x228 0		/* UART2_RXD (IOCFG146) */
-					0x22c 0		/* UART2_TXD (IOCFG147) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart2_cfg_idle: uart2_cfg_idle {
-				pinctrl-single,pins = <
-					0x220 0		/* GPIO (IOCFG144) */
-					0x224 0		/* GPIO (IOCFG145) */
-					0x228 0		/* GPIO (IOCFG146) */
-					0x22c 0		/* GPIO (IOCFG147) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart3_cfg_func: uart3_cfg_func {
-				pinctrl-single,pins = <
-					0x294 0		/* UART3_CTS (IOCFG173) */
-					0x298 0		/* UART3_RTS (IOCFG174) */
-					0x29c 0		/* UART3_RXD (IOCFG175) */
-					0x2a0 0		/* UART3_TXD (IOCFG176) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart3_cfg_idle: uart3_cfg_idle {
-				pinctrl-single,pins = <
-					0x294 0		/* UART3_CTS (IOCFG173) */
-					0x298 0		/* UART3_RTS (IOCFG174) */
-					0x29c 0		/* UART3_RXD (IOCFG175) */
-					0x2a0 0		/* UART3_TXD (IOCFG176) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			uart4_cfg_func: uart4_cfg_func {
-				pinctrl-single,pins = <
-					0x2a4 0		/* UART4_CTS (IOCFG177) */
-					0x2a8 0		/* UART4_RTS (IOCFG178) */
-					0x2ac 0		/* UART4_RXD (IOCFG179) */
-					0x2b0 0		/* UART4_TXD (IOCFG180) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			i2c0_cfg_func: i2c0_cfg_func {
-				pinctrl-single,pins = <
-					0x17c 0		/* I2C0_SCL (IOCFG103) */
-					0x180 0		/* I2C0_SDA (IOCFG104) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			i2c1_cfg_func: i2c1_cfg_func {
-				pinctrl-single,pins = <
-					0x184 0		/* I2C1_SCL (IOCFG105) */
-					0x188 0		/* I2C1_SDA (IOCFG106) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			i2c2_cfg_func: i2c2_cfg_func {
-				pinctrl-single,pins = <
-					0x118 0		/* I2C2_SCL (IOCFG79) */
-					0x11c 0		/* I2C2_SDA (IOCFG80) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			i2c3_cfg_func: i2c3_cfg_func {
-				pinctrl-single,pins = <
-					0x100 0		/* I2C3_SCL (IOCFG73) */
-					0x104 0		/* I2C3_SDA (IOCFG74) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi0_cfg_func1: spi0_cfg_func1 {
-				pinctrl-single,pins = <
-					0x1d4 0		/* SPI0_CLK (IOCFG125) */
-					0x1d8 0		/* SPI0_DI (IOCFG126) */
-					0x1dc 0		/* SPI0_DO (IOCFG127) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi0_cfg_func2: spi0_cfg_func2 {
-				pinctrl-single,pins = <
-					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
-					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
-					0x1e8 0		/* SPI0_CS2 (IOCFG130 */
-					0x1ec 0		/* SPI0_CS3 (IOCFG131) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi1_cfg_func1: spi1_cfg_func1 {
-				pinctrl-single,pins = <
-					0x1f0 0		/* SPI1_CLK (IOCFG132) */
-					0x1f4 0		/* SPI1_DI (IOCFG133) */
-					0x1f8 0		/* SPI1_DO (IOCFG134) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			spi1_cfg_func2: spi1_cfg_func2 {
-				pinctrl-single,pins = <
-					0x1fc 0		/* SPI1_CS (IOCFG135) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			kpc_cfg_func: kpc_cfg_func {
-				pinctrl-single,pins = <
-					0x250 0		/* KEY_IN0 (IOCFG156) */
-					0x254 0		/* KEY_IN1 (IOCFG157) */
-					0x258 0		/* KEY_IN2 (IOCFG158) */
-					0x230 0		/* KEY_OUT0 (IOCFG148) */
-					0x234 0		/* KEY_OUT1 (IOCFG149) */
-					0x238 0		/* KEY_OUT2 (IOCFG150) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-			emmc_cfg_func: emmc_cfg_func {
-				pinctrl-single,pins = <
-					0x0ac 0		/* eMMC_CMD (IOCFG40) */
-					0x0b0 0		/* eMMC_CLK (IOCFG41) */
-					0x058 0		/* NAND_CS3_N (IOCFG19) */
-					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
-					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
-					0x08c 0		/* NAND_DATA8 (IOCFG32) */
-					0x090 0		/* NAND_DATA9 (IOCFG33) */
-					0x094 0		/* NAND_DATA10 (IOCFG34) */
-					0x098 0		/* NAND_DATA11 (IOCFG35) */
-					0x09c 0		/* NAND_DATA12 (IOCFG36) */
-					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
-					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
-					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			sd_cfg_func1: sd_cfg_func1 {
-				pinctrl-single,pins = <
-					0x18c 0		/* SD_CLK (IOCFG107) */
-					0x190 0		/* SD_CMD (IOCFG108) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			sd_cfg_func2: sd_cfg_func2 {
-				pinctrl-single,pins = <
-					0x194 0		/* SD_DATA0 (IOCFG109) */
-					0x198 0		/* SD_DATA1 (IOCFG110) */
-					0x19c 0		/* SD_DATA2 (IOCFG111) */
-					0x1a0 0		/* SD_DATA3 (IOCFG112) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x70 0xf0>;
-			};
-			nand_cfg_func1: nand_cfg_func1 {
-				pinctrl-single,pins = <
-					0x03c 0		/* NAND_ALE (IOCFG12) */
-					0x040 0		/* NAND_CLE (IOCFG13) */
-					0x06c 0		/* NAND_DATA0 (IOCFG24) */
-					0x070 0		/* NAND_DATA1 (IOCFG25) */
-					0x074 0		/* NAND_DATA2 (IOCFG26) */
-					0x078 0		/* NAND_DATA3 (IOCFG27) */
-					0x07c 0		/* NAND_DATA4 (IOCFG28) */
-					0x080 0		/* NAND_DATA5 (IOCFG29) */
-					0x084 0		/* NAND_DATA6 (IOCFG30) */
-					0x088 0		/* NAND_DATA7 (IOCFG31) */
-					0x08c 0		/* NAND_DATA8 (IOCFG32) */
-					0x090 0		/* NAND_DATA9 (IOCFG33) */
-					0x094 0		/* NAND_DATA10 (IOCFG34) */
-					0x098 0		/* NAND_DATA11 (IOCFG35) */
-					0x09c 0		/* NAND_DATA12 (IOCFG36) */
-					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
-					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
-					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			nand_cfg_func2: nand_cfg_func2 {
-				pinctrl-single,pins = <
-					0x044 0		/* NAND_RE_N (IOCFG14) */
-					0x048 0		/* NAND_WE_N (IOCFG15) */
-					0x04c 0		/* NAND_CS0_N (IOCFG16) */
-					0x050 0		/* NAND_CS1_N (IOCFG17) */
-					0x054 0		/* NAND_CS2_N (IOCFG18) */
-					0x058 0		/* NAND_CS3_N (IOCFG19) */
-					0x05c 0		/* NAND_BUSY0_N (IOCFG20) */
-					0x060 0		/* NAND_BUSY1_N (IOCFG21) */
-					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
-					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
-				>;
-				pinctrl-single,bias-pulldown = <0 2 0 2>;
-				pinctrl-single,bias-pullup = <1 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			sdio_cfg_func: sdio_cfg_func {
-				pinctrl-single,pins = <
-					0x1a4 0		/* SDIO0_CLK (IOCG113) */
-					0x1a8 0		/* SDIO0_CMD (IOCG114) */
-					0x1ac 0		/* SDIO0_DATA0 (IOCG115) */
-					0x1b0 0		/* SDIO0_DATA1 (IOCG116) */
-					0x1b4 0		/* SDIO0_DATA2 (IOCG117) */
-					0x1b8 0		/* SDIO0_DATA3 (IOCG118) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-				pinctrl-single,drive-strength = <0x30 0xf0>;
-			};
-			audio_out_cfg_func: audio_out_cfg_func {
-				pinctrl-single,pins = <
-					0x200 0		/* GPIO (IOCFG136) */
-					0x204 0		/* GPIO (IOCFG137) */
-				>;
-				pinctrl-single,bias-pulldown = <2 2 0 2>;
-				pinctrl-single,bias-pullup = <0 1 0 1>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		call {
-			label = "call";
-			gpios = <&gpio17 2 0>;
-			linux,code = <169>;	/* KEY_PHONE */
-		};
-	};
-};
diff --git a/src/arm/hi3620.dtsi b/src/arm/hi3620.dtsi
deleted file mode 100644
index 6cbb62e5c6a9..000000000000
--- a/src/arm/hi3620.dtsi
+++ /dev/null
@@ -1,566 +0,0 @@
-/*
- * Hisilicon Ltd. Hi3620 SoC
- *
- * Copyright (C) 2012-2013 Hisilicon Ltd.
- * Copyright (C) 2012-2013 Linaro Ltd.
- *
- * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/hi3620-clock.h>
-
-/ {
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-	};
-
-	pclk: clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-		clock-output-names = "apb_pclk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "hisilicon,hi3620-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	amba {
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0 0xfc000000 0x2000000>;
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0x100000 0x100000>;
-			interrupts = <0 15 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			/* gic dist base, gic cpu base */
-			reg = <0x1000 0x1000>, <0x100 0x100>;
-		};
-
-		sysctrl: system-controller@802000 {
-			compatible = "hisilicon,sysctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x802000 0x1000>;
-			reg = <0x802000 0x1000>;
-
-			smp-offset = <0x31c>;
-			resume-offset = <0x308>;
-			reboot-offset = <0x4>;
-
-			clock: clock@0 {
-				compatible = "hisilicon,hi3620-clock";
-				reg = <0 0x10000>;
-				#clock-cells = <1>;
-			};
-		};
-
-		dual_timer0: dual_timer@800000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x800000 0x1000>;
-			/* timer00 & timer01 */
-			interrupts = <0 0 4>, <0 1 4>;
-			clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer1: dual_timer@801000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x801000 0x1000>;
-			/* timer10 & timer11 */
-			interrupts = <0 2 4>, <0 3 4>;
-			clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer2: dual_timer@a01000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xa01000 0x1000>;
-			/* timer20 & timer21 */
-			interrupts = <0 4 4>, <0 5 4>;
-			clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer3: dual_timer@a02000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xa02000 0x1000>;
-			/* timer30 & timer31 */
-			interrupts = <0 6 4>, <0 7 4>;
-			clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		dual_timer4: dual_timer@a03000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0xa03000 0x1000>;
-			/* timer40 & timer41 */
-			interrupts = <0 96 4>, <0 97 4>;
-			clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		timer5: timer@600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		uart0: uart@b00000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb00000 0x1000>;
-			interrupts = <0 20 4>;
-			clocks = <&clock HI3620_UARTCLK0>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		uart1: uart@b01000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb01000 0x1000>;
-			interrupts = <0 21 4>;
-			clocks = <&clock HI3620_UARTCLK1>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		uart2: uart@b02000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb02000 0x1000>;
-			interrupts = <0 22 4>;
-			clocks = <&clock HI3620_UARTCLK2>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		uart3: uart@b03000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb03000 0x1000>;
-			interrupts = <0 23 4>;
-			clocks = <&clock HI3620_UARTCLK3>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		uart4: uart@b04000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xb04000 0x1000>;
-			interrupts = <0 24 4>;
-			clocks = <&clock HI3620_UARTCLK4>;
-			clock-names = "apb_pclk";
-			status = "disabled";
-		};
-
-		gpio0: gpio@806000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x806000 0x1000>;
-			interrupts = <0 64 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
-					&pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK0>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio1: gpio@807000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x807000 0x1000>;
-			interrupts = <0 65 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
-					&pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
-					&pmx0 6 5 1 &pmx0 7 6 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK1>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio2: gpio@808000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x808000 0x1000>;
-			interrupts = <0 66 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
-					&pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
-					&pmx0 6 3 1 &pmx0 7 3 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK2>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio3: gpio@809000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x809000 0x1000>;
-			interrupts = <0 67 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
-					&pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
-					&pmx0 6 11 1 &pmx0 7 11 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK3>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio4: gpio@80a000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80a000 0x1000>;
-			interrupts = <0 68 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
-					&pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
-					&pmx0 6 13 1 &pmx0 7 13 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK4>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio5: gpio@80b000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80b000 0x1000>;
-			interrupts = <0 69 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
-					&pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
-					&pmx0 6 16 1 &pmx0 7 16 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK5>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio6: gpio@80c000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80c000 0x1000>;
-			interrupts = <0 70 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
-					&pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
-					&pmx0 6 18 1 &pmx0 7 19 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK6>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio7: gpio@80d000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80d000 0x1000>;
-			interrupts = <0 71 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
-					&pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
-					&pmx0 6 25 1 &pmx0 7 26 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK7>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio8: gpio@80e000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80e000 0x1000>;
-			interrupts = <0 72 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
-					&pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
-					&pmx0 6 33 1 &pmx0 7 34 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK8>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio9: gpio@80f000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x80f000 0x1000>;
-			interrupts = <0 73 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
-					&pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
-					&pmx0 6 41 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK9>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio10: gpio@810000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x810000 0x1000>;
-			interrupts = <0 74 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
-					&pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK10>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio11: gpio@811000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x811000 0x1000>;
-			interrupts = <0 75 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
-					&pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
-					&pmx0 6 49 1 &pmx0 7 49 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK11>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio12: gpio@812000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x812000 0x1000>;
-			interrupts = <0 76 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
-					&pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
-					&pmx0 6 51 1 &pmx0 7 52 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK12>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio13: gpio@813000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x813000 0x1000>;
-			interrupts = <0 77 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
-					&pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
-					&pmx0 6 55 1 &pmx0 7 56 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK13>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio14: gpio@814000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x814000 0x1000>;
-			interrupts = <0 78 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
-					&pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
-					&pmx0 6 60 1 &pmx0 7 61 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK14>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio15: gpio@815000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x815000 0x1000>;
-			interrupts = <0 79 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
-					&pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
-					&pmx0 6 64 1 &pmx0 7 65 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK15>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio16: gpio@816000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x816000 0x1000>;
-			interrupts = <0 80 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
-					&pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
-					&pmx0 6 72 1 &pmx0 7 73 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK16>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio17: gpio@817000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x817000 0x1000>;
-			interrupts = <0 81 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
-					&pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
-					&pmx0 6 80 1 &pmx0 7 81 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK17>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio18: gpio@818000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x818000 0x1000>;
-			interrupts = <0 82 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
-					&pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
-					&pmx0 6 86 1 &pmx0 7 87 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK18>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio19: gpio@819000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x819000 0x1000>;
-			interrupts = <0 83 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
-					&pmx0 3 88 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK19>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio20: gpio@81a000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x81a000 0x1000>;
-			interrupts = <0 84 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
-					&pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK20>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio21: gpio@81b000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x81b000 0x1000>;
-			interrupts = <0 85 0x4>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <	&pmx0 3 94 1 &pmx0 7 96 1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clock HI3620_GPIOCLK21>;
-			clock-names = "apb_pclk";
-		};
-
-		pmx0: pinmux@803000 {
-			compatible = "pinctrl-single";
-			reg = <0x803000 0x188>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#gpio-range-cells = <3>;
-			ranges;
-
-			pinctrl-single,register-width = <32>;
-			pinctrl-single,function-mask = <7>;
-			/* pin base, nr pins & gpio function */
-			pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
-						&range 12 1 0 &range 13 29 1
-						&range 43 1 0 &range 44 49 1
-						&range 94 1 1 &range 96 2 1>;
-
-			range: gpio-range {
-				#pinctrl-single,gpio-range-cells = <3>;
-			};
-		};
-
-		pmx1: pinmux@803800 {
-			compatible = "pinconf-single";
-			reg = <0x803800 0x2dc>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pinctrl-single,register-width = <32>;
-		};
-	};
-};
diff --git a/src/arm/highbank.dts b/src/arm/highbank.dts
deleted file mode 100644
index ed14aeac0566..000000000000
--- a/src/arm/highbank.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-
-/* First 4KB has pen for secondary cores. */
-/memreserve/ 0x00000000 0x0001000;
-
-/ {
-	model = "Calxeda Highbank";
-	compatible = "calxeda,highbank";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	clock-ranges;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@900 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x900>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-			operating-points = <
-				/* kHz    ignored */
-				 1300000  1000000
-				 1200000  1000000
-				 1100000  1000000
-				  800000  1000000
-				  400000  1000000
-				  200000  1000000
-			>;
-			clock-latency = <100000>;
-		};
-
-		cpu@901 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x901>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@902 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x902>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-
-		cpu@903 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x903>;
-			next-level-cache = <&L2>;
-			clocks = <&a9pll>;
-			clock-names = "cpu";
-		};
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x00000000 0xff900000>;
-	};
-
-	soc {
-		ranges = <0x00000000 0x00000000 0xffffffff>;
-
-		memory-controller@fff00000 {
-			compatible = "calxeda,hb-ddr-ctrl";
-			reg = <0xfff00000 0x1000>;
-			interrupts = <0 91 4>;
-		};
-
-		timer@fff10600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xfff10600 0x20>;
-			interrupts = <1 13 0xf01>;
-			clocks = <&a9periphclk>;
-		};
-
-		watchdog@fff10620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0xfff10620 0x20>;
-			interrupts = <1 14 0xf01>;
-			clocks = <&a9periphclk>;
-		};
-
-		intc: interrupt-controller@fff11000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0xfff11000 0x1000>,
-			      <0xfff10100 0x100>;
-		};
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0xfff12000 0x1000>;
-			interrupts = <0 70 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
-		};
-
-
-		sregs@fff3c200 {
-			compatible = "calxeda,hb-sregs-l2-ecc";
-			reg = <0xfff3c200 0x100>;
-			interrupts = <0 71 4  0 72 4>;
-		};
-
-	};
-};
-
-/include/ "ecx-common.dtsi"
diff --git a/src/arm/hisi-x5hd2-dkb.dts b/src/arm/hisi-x5hd2-dkb.dts
deleted file mode 100644
index 05b44c272c9a..000000000000
--- a/src/arm/hisi-x5hd2-dkb.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "hisi-x5hd2.dtsi"
-
-/ {
-	model = "Hisilicon HIX5HD2 Development Board";
-	compatible = "hisilicon,hix5hd2";
-
-	chosen {
-		bootargs = "console=ttyAMA0,115200 earlyprintk";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "hisilicon,hix5hd2-smp";
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&l2>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&l2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>;
-	};
-};
-
-&timer0 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/hisi-x5hd2.dtsi b/src/arm/hisi-x5hd2.dtsi
deleted file mode 100644
index f85ba2924ff7..000000000000
--- a/src/arm/hisi-x5hd2.dtsi
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/hix5hd2-clock.h>
-
-/ {
-	aliases {
-		serial0 = &uart0;
-	};
-
-	gic: interrupt-controller@f8a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		/* gic dist base, gic cpu base */
-		reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0 0xf8000000 0x8000000>;
-
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "arm,amba-bus";
-			ranges;
-
-			timer0: timer@00002000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00002000 0x1000>;
-				/* timer00 & timer01 */
-				interrupts = <0 24 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer1: timer@00a29000 {
-				/*
-				 * Only used in NORMAL state, not available ins
-				 * SLOW or DOZE state.
-				 * The rate is fixed in 24MHz.
-				 */
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a29000 0x1000>;
-				/* timer10 & timer11 */
-				interrupts = <0 25 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer2: timer@00a2a000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a2a000 0x1000>;
-				/* timer20 & timer21 */
-				interrupts = <0 26 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer3: timer@00a2b000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a2b000 0x1000>;
-				/* timer30 & timer31 */
-				interrupts = <0 27 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			timer4: timer@00a81000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x00a81000 0x1000>;
-				/* timer30 & timer31 */
-				interrupts = <0 28 4>;
-				clocks = <&clock HIX5HD2_FIXED_24M>;
-				status = "disabled";
-			};
-
-			uart0: uart@00b00000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00b00000 0x1000>;
-				interrupts = <0 49 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			uart1: uart@00006000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00006000 0x1000>;
-				interrupts = <0 50 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			uart2: uart@00b02000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00b02000 0x1000>;
-				interrupts = <0 51 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			uart3: uart@00b03000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x00b03000 0x1000>;
-				interrupts = <0 52 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-
-			uart4: uart@00b04000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb04000 0x1000>;
-				interrupts = <0 53 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
-				status = "disabled";
-			};
-		};
-
-		local_timer@00a00600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x00a00600 0x20>;
-			interrupts = <1 13 0xf01>;
-		};
-
-		l2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0x00a10000 0x100000>;
-			interrupts = <0 15 4>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		sysctrl: system-controller@00000000 {
-			compatible = "hisilicon,sysctrl";
-			reg = <0x00000000 0x1000>;
-			reboot-offset = <0x4>;
-		};
-
-		cpuctrl@00a22000 {
-			compatible = "hisilicon,cpuctrl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x00a22000 0x2000>;
-			ranges = <0 0x00a22000 0x2000>;
-
-			clock: clock@0 {
-				compatible = "hisilicon,hix5hd2-clock";
-				reg = <0 0x2000>;
-				#clock-cells = <1>;
-			};
-		};
-	};
-};
diff --git a/src/arm/imx23-evk.dts b/src/arm/imx23-evk.dts
deleted file mode 100644
index a33f66c11b73..000000000000
--- a/src/arm/imx23-evk.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "Freescale i.MX23 Evaluation Kit";
-	compatible = "fsl,imx23-evk", "fsl,imx23";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				wp-gpios = <&gpio1 30 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_LCD_RESET__GPIO_1_18
-						MX23_PAD_PWM3__GPIO_1_29
-						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a>;
-				lcd-supply = <&reg_lcd_3v3>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9200000>;
-							hactive = <480>;
-							vactive = <272>;
-							hback-porch = <15>;
-							hfront-porch = <8>;
-							vback-porch = <12>;
-							vfront-porch = <4>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
-
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 18 0>;
-			enable-active-high;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/src/arm/imx23-olinuxino.dts b/src/arm/imx23-olinuxino.dts
deleted file mode 100644
index 7e6eef2488e8..000000000000
--- a/src/arm/imx23-olinuxino.dts
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "i.MX23 Olinuxino Low Cost Board";
-	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				broken-cd;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_ALE__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio2_1: led_gpio2_1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DETECT__GPIO_2_1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ssp1: ssp@80034000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx23-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
-			gpio = <&gpio0 17 0>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio2_1>;
-
-		user {
-			label = "green";
-			gpios = <&gpio2 1 1>;
-		};
-	};
-};
diff --git a/src/arm/imx23-pinfunc.h b/src/arm/imx23-pinfunc.h
deleted file mode 100644
index 5c0f32ca3a93..000000000000
--- a/src/arm/imx23-pinfunc.h
+++ /dev/null
@@ -1,333 +0,0 @@
-/*
- * Header providing constants for i.MX23 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
-#define __DT_BINDINGS_MX23_PINCTRL_H__
-
-#include "mxs-pinfunc.h"
-
-#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
-#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
-#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
-#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
-#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
-#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
-#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
-#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
-#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
-#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
-#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
-#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
-#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
-#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
-#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
-#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
-#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
-#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
-#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
-#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
-#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
-#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
-#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
-#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
-#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
-#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
-#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
-#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
-#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
-#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
-#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
-#define MX23_PAD_LCD_D00__LCD_D00			0x1000
-#define MX23_PAD_LCD_D01__LCD_D01			0x1010
-#define MX23_PAD_LCD_D02__LCD_D02			0x1020
-#define MX23_PAD_LCD_D03__LCD_D03			0x1030
-#define MX23_PAD_LCD_D04__LCD_D04			0x1040
-#define MX23_PAD_LCD_D05__LCD_D05			0x1050
-#define MX23_PAD_LCD_D06__LCD_D06			0x1060
-#define MX23_PAD_LCD_D07__LCD_D07			0x1070
-#define MX23_PAD_LCD_D08__LCD_D08			0x1080
-#define MX23_PAD_LCD_D09__LCD_D09			0x1090
-#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
-#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
-#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
-#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
-#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
-#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
-#define MX23_PAD_LCD_D16__LCD_D16			0x1100
-#define MX23_PAD_LCD_D17__LCD_D17			0x1110
-#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
-#define MX23_PAD_LCD_RS__LCD_RS				0x1130
-#define MX23_PAD_LCD_WR__LCD_WR				0x1140
-#define MX23_PAD_LCD_CS__LCD_CS				0x1150
-#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
-#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
-#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
-#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
-#define MX23_PAD_PWM0__PWM0				0x11a0
-#define MX23_PAD_PWM1__PWM1				0x11b0
-#define MX23_PAD_PWM2__PWM2				0x11c0
-#define MX23_PAD_PWM3__PWM3				0x11d0
-#define MX23_PAD_PWM4__PWM4				0x11e0
-#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
-#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
-#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
-#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
-#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
-#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
-#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
-#define MX23_PAD_ROTARYA__ROTARYA			0x2070
-#define MX23_PAD_ROTARYB__ROTARYB			0x2080
-#define MX23_PAD_EMI_A00__EMI_A00			0x2090
-#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
-#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
-#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
-#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
-#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
-#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
-#define MX23_PAD_EMI_A07__EMI_A07			0x2100
-#define MX23_PAD_EMI_A08__EMI_A08			0x2110
-#define MX23_PAD_EMI_A09__EMI_A09			0x2120
-#define MX23_PAD_EMI_A10__EMI_A10			0x2130
-#define MX23_PAD_EMI_A11__EMI_A11			0x2140
-#define MX23_PAD_EMI_A12__EMI_A12			0x2150
-#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
-#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
-#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
-#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
-#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
-#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
-#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
-#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
-#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
-#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
-#define MX23_PAD_EMI_D00__EMI_D00			0x3000
-#define MX23_PAD_EMI_D01__EMI_D01			0x3010
-#define MX23_PAD_EMI_D02__EMI_D02			0x3020
-#define MX23_PAD_EMI_D03__EMI_D03			0x3030
-#define MX23_PAD_EMI_D04__EMI_D04			0x3040
-#define MX23_PAD_EMI_D05__EMI_D05			0x3050
-#define MX23_PAD_EMI_D06__EMI_D06			0x3060
-#define MX23_PAD_EMI_D07__EMI_D07			0x3070
-#define MX23_PAD_EMI_D08__EMI_D08			0x3080
-#define MX23_PAD_EMI_D09__EMI_D09			0x3090
-#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
-#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
-#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
-#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
-#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
-#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
-#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
-#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
-#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
-#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
-#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
-#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
-#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
-#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
-#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
-#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
-#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
-#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
-#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
-#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
-#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
-#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
-#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
-#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
-#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
-#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
-#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
-#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
-#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
-#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
-#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
-#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
-#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
-#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
-#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
-#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
-#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
-#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
-#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
-#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
-#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
-#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
-#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
-#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
-#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
-#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
-#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
-#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
-#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
-#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
-#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
-#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
-#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
-#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
-#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
-#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
-#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
-#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
-#define MX23_PAD_PWM0__ROTARYA				0x11a1
-#define MX23_PAD_PWM1__ROTARYB				0x11b1
-#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
-#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
-#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
-#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
-#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
-#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
-#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
-#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
-#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
-#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
-#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
-#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
-#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
-#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
-#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
-#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
-#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
-#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
-#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
-#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
-#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
-#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
-#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
-#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
-#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
-#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
-#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
-#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
-#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
-#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
-#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
-#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
-#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
-#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
-#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
-#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
-#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
-#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
-#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
-#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
-#define MX23_PAD_PWM0__DUART_RX				0x11a2
-#define MX23_PAD_PWM1__DUART_TX				0x11b2
-#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
-#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
-#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
-#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
-#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
-#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
-#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
-#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
-#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
-#define MX23_PAD_ROTARYA__SPDIF				0x2072
-#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
-#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
-#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
-#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
-#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
-#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
-#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
-#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
-#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
-#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
-#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
-#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
-#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
-#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
-#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
-#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
-#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
-#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
-#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
-#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
-#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
-#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
-#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
-#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
-#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
-#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
-#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
-#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
-#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
-#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
-#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
-#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
-#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
-#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
-#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
-#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
-#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
-#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
-#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
-#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
-#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
-#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
-#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
-#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
-#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
-#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
-#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
-#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
-#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
-#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
-#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
-#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
-#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
-#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
-#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
-#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
-#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
-#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
-#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
-#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
-#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
-#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
-#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
-#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
-#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
-#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
-#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
-#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
-#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
-#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
-#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
-#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
-#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
-#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
-#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
-#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
-#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
-#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
-#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
-#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
-#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
-#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
-#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
-#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
-#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
-#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
-#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
-#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
-#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
-#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
-#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
-#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
-#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
-#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
-#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
-
-#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/src/arm/imx23-stmp378x_devb.dts b/src/arm/imx23-stmp378x_devb.dts
deleted file mode 100644
index 455169e99d49..000000000000
--- a/src/arm/imx23-stmp378x_devb.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx23.dtsi"
-
-/ {
-	model = "Freescale STMP378x Development Board";
-	compatible = "fsl,stmp378x-devb", "fsl,imx23";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx23-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <4>;
-				wp-gpios = <&gpio1 30 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM3__GPIO_1_29
-						MX23_PAD_PWM4__GPIO_1_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			auart0: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
-	};
-};
diff --git a/src/arm/imx23.dtsi b/src/arm/imx23.dtsi
deleted file mode 100644
index bbcfb5a19c77..000000000000
--- a/src/arm/imx23.dtsi
+++ /dev/null
@@ -1,535 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-#include "imx23-pinfunc.h"
-
-/ {
-	interrupt-parent = <&icoll>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		serial0 = &auart0;
-		serial1 = &auart1;
-		spi0 = &ssp0;
-		spi1 = &ssp1;
-		usbphy0 = &usbphy0;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	apb@80000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80000000 0x80000>;
-		ranges;
-
-		apbh@80000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x40000>;
-			ranges;
-
-			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx23-icoll", "fsl,icoll";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x80000000 0x2000>;
-			};
-
-			dma_apbh: dma-apbh@80004000 {
-				compatible = "fsl,imx23-dma-apbh";
-				reg = <0x80004000 0x2000>;
-				interrupts = <0 14 20 0
-					      13 13 13 13>;
-				interrupt-names = "empty", "ssp0", "ssp1", "empty",
-						  "gpmi0", "gpmi1", "gpmi2", "gpmi3";
-				#dma-cells = <1>;
-				dma-channels = <8>;
-				clocks = <&clks 15>;
-			};
-
-			ecc@80008000 {
-				reg = <0x80008000 0x2000>;
-				status = "disabled";
-			};
-
-			gpmi-nand@8000c000 {
-				compatible = "fsl,imx23-gpmi-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
-				reg-names = "gpmi-nand", "bch";
-				interrupts = <56>;
-				interrupt-names = "bch";
-				clocks = <&clks 34>;
-				clock-names = "gpmi_io";
-				dmas = <&dma_apbh 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp0: ssp@80010000 {
-				reg = <0x80010000 0x2000>;
-				interrupts = <15>;
-				clocks = <&clks 33>;
-				dmas = <&dma_apbh 1>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			etm@80014000 {
-				reg = <0x80014000 0x2000>;
-				status = "disabled";
-			};
-
-			pinctrl@80018000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx23-pinctrl", "simple-bus";
-				reg = <0x80018000 0x2000>;
-
-				gpio0: gpio@0 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					interrupts = <16>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio1: gpio@1 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					interrupts = <17>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@2 {
-					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
-					interrupts = <18>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				duart_pins_a: duart@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM0__DUART_RX
-						MX23_PAD_PWM1__DUART_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_pins_a: auart0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_AUART1_RX__AUART1_RX
-						MX23_PAD_AUART1_TX__AUART1_TX
-						MX23_PAD_AUART1_CTS__AUART1_CTS
-						MX23_PAD_AUART1_RTS__AUART1_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_2pins_a: auart0-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_I2C_SCL__AUART1_TX
-						MX23_PAD_I2C_SDA__AUART1_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_a: gpmi-nand@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_D00__GPMI_D00
-						MX23_PAD_GPMI_D01__GPMI_D01
-						MX23_PAD_GPMI_D02__GPMI_D02
-						MX23_PAD_GPMI_D03__GPMI_D03
-						MX23_PAD_GPMI_D04__GPMI_D04
-						MX23_PAD_GPMI_D05__GPMI_D05
-						MX23_PAD_GPMI_D06__GPMI_D06
-						MX23_PAD_GPMI_D07__GPMI_D07
-						MX23_PAD_GPMI_CLE__GPMI_CLE
-						MX23_PAD_GPMI_ALE__GPMI_ALE
-						MX23_PAD_GPMI_RDY0__GPMI_RDY0
-						MX23_PAD_GPMI_RDY1__GPMI_RDY1
-						MX23_PAD_GPMI_WPN__GPMI_WPN
-						MX23_PAD_GPMI_WRN__GPMI_WRN
-						MX23_PAD_GPMI_RDN__GPMI_RDN
-						MX23_PAD_GPMI_CE1N__GPMI_CE1N
-						MX23_PAD_GPMI_CE0N__GPMI_CE0N
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_fixup: gpmi-pins-fixup {
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_WPN__GPMI_WPN
-						MX23_PAD_GPMI_WRN__GPMI_WRN
-						MX23_PAD_GPMI_RDN__GPMI_RDN
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-				};
-
-				mmc0_4bit_pins_a: mmc0-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DATA0__SSP1_DATA0
-						MX23_PAD_SSP1_DATA1__SSP1_DATA1
-						MX23_PAD_SSP1_DATA2__SSP1_DATA2
-						MX23_PAD_SSP1_DATA3__SSP1_DATA3
-						MX23_PAD_SSP1_CMD__SSP1_CMD
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_8bit_pins_a: mmc0-8bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DATA0__SSP1_DATA0
-						MX23_PAD_SSP1_DATA1__SSP1_DATA1
-						MX23_PAD_SSP1_DATA2__SSP1_DATA2
-						MX23_PAD_SSP1_DATA3__SSP1_DATA3
-						MX23_PAD_GPMI_D08__SSP1_DATA4
-						MX23_PAD_GPMI_D09__SSP1_DATA5
-						MX23_PAD_GPMI_D10__SSP1_DATA6
-						MX23_PAD_GPMI_D11__SSP1_DATA7
-						MX23_PAD_SSP1_CMD__SSP1_CMD
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_pins_fixup: mmc0-pins-fixup {
-					fsl,pinmux-ids = <
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
-						MX23_PAD_SSP1_SCK__SSP1_SCK
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm2_pins_a: pwm2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_PWM2__PWM2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_24bit_pins_a: lcdif-24bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_LCD_D00__LCD_D00
-						MX23_PAD_LCD_D01__LCD_D01
-						MX23_PAD_LCD_D02__LCD_D02
-						MX23_PAD_LCD_D03__LCD_D03
-						MX23_PAD_LCD_D04__LCD_D04
-						MX23_PAD_LCD_D05__LCD_D05
-						MX23_PAD_LCD_D06__LCD_D06
-						MX23_PAD_LCD_D07__LCD_D07
-						MX23_PAD_LCD_D08__LCD_D08
-						MX23_PAD_LCD_D09__LCD_D09
-						MX23_PAD_LCD_D10__LCD_D10
-						MX23_PAD_LCD_D11__LCD_D11
-						MX23_PAD_LCD_D12__LCD_D12
-						MX23_PAD_LCD_D13__LCD_D13
-						MX23_PAD_LCD_D14__LCD_D14
-						MX23_PAD_LCD_D15__LCD_D15
-						MX23_PAD_LCD_D16__LCD_D16
-						MX23_PAD_LCD_D17__LCD_D17
-						MX23_PAD_GPMI_D08__LCD_D18
-						MX23_PAD_GPMI_D09__LCD_D19
-						MX23_PAD_GPMI_D10__LCD_D20
-						MX23_PAD_GPMI_D11__LCD_D21
-						MX23_PAD_GPMI_D12__LCD_D22
-						MX23_PAD_GPMI_D13__LCD_D23
-						MX23_PAD_LCD_DOTCK__LCD_DOTCK
-						MX23_PAD_LCD_ENABLE__LCD_ENABLE
-						MX23_PAD_LCD_HSYNC__LCD_HSYNC
-						MX23_PAD_LCD_VSYNC__LCD_VSYNC
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				spi2_pins_a: spi2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX23_PAD_GPMI_WRN__SSP2_SCK
-						MX23_PAD_GPMI_RDY1__SSP2_CMD
-						MX23_PAD_GPMI_D00__SSP2_DATA0
-						MX23_PAD_GPMI_D03__SSP2_DATA3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			digctl@8001c000 {
-				compatible = "fsl,imx23-digctl";
-				reg = <0x8001c000 2000>;
-				status = "disabled";
-			};
-
-			emi@80020000 {
-				reg = <0x80020000 0x2000>;
-				status = "disabled";
-			};
-
-			dma_apbx: dma-apbx@80024000 {
-				compatible = "fsl,imx23-dma-apbx";
-				reg = <0x80024000 0x2000>;
-				interrupts = <7 5 9 26
-					      19 0 25 23
-					      60 58 9 0
-					      0 0 0 0>;
-				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
-						  "saif0", "empty", "auart0-rx", "auart0-tx",
-						  "auart1-rx", "auart1-tx", "saif1", "empty",
-						  "empty", "empty", "empty", "empty";
-				#dma-cells = <1>;
-				dma-channels = <16>;
-				clocks = <&clks 16>;
-			};
-
-			dcp@80028000 {
-				compatible = "fsl,imx23-dcp";
-				reg = <0x80028000 0x2000>;
-				interrupts = <53 54>;
-				status = "okay";
-			};
-
-			pxp@8002a000 {
-				reg = <0x8002a000 0x2000>;
-				status = "disabled";
-			};
-
-			ocotp@8002c000 {
-				compatible = "fsl,ocotp";
-				reg = <0x8002c000 0x2000>;
-				status = "disabled";
-			};
-
-			axi-ahb@8002e000 {
-				reg = <0x8002e000 0x2000>;
-				status = "disabled";
-			};
-
-			lcdif@80030000 {
-				compatible = "fsl,imx23-lcdif";
-				reg = <0x80030000 2000>;
-				interrupts = <46 45>;
-				clocks = <&clks 38>;
-				status = "disabled";
-			};
-
-			ssp1: ssp@80034000 {
-				reg = <0x80034000 0x2000>;
-				interrupts = <2>;
-				clocks = <&clks 33>;
-				dmas = <&dma_apbh 2>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			tvenc@80038000 {
-				reg = <0x80038000 0x2000>;
-				status = "disabled";
-			};
-                };
-
-		apbx@80040000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80040000 0x40000>;
-			ranges;
-
-			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
-				reg = <0x80040000 0x2000>;
-				#clock-cells = <1>;
-			};
-
-			saif0: saif@80042000 {
-				reg = <0x80042000 0x2000>;
-				dmas = <&dma_apbx 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			power@80044000 {
-				reg = <0x80044000 0x2000>;
-				status = "disabled";
-			};
-
-			saif1: saif@80046000 {
-				reg = <0x80046000 0x2000>;
-				dmas = <&dma_apbx 10>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			audio-out@80048000 {
-				reg = <0x80048000 0x2000>;
-				dmas = <&dma_apbx 1>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			audio-in@8004c000 {
-				reg = <0x8004c000 0x2000>;
-				dmas = <&dma_apbx 0>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			lradc: lradc@80050000 {
-				compatible = "fsl,imx23-lradc";
-				reg = <0x80050000 0x2000>;
-				interrupts = <36 37 38 39 40 41 42 43 44>;
-				status = "disabled";
-				clocks = <&clks 26>;
-			};
-
-			spdif@80054000 {
-				reg = <0x80054000 2000>;
-				dmas = <&dma_apbx 2>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			i2c@80058000 {
-				reg = <0x80058000 0x2000>;
-				dmas = <&dma_apbx 3>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			rtc@8005c000 {
-				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x8005c000 0x2000>;
-				interrupts = <22>;
-			};
-
-			pwm: pwm@80064000 {
-				compatible = "fsl,imx23-pwm";
-				reg = <0x80064000 0x2000>;
-				clocks = <&clks 30>;
-				#pwm-cells = <2>;
-				fsl,pwm-number = <5>;
-				status = "disabled";
-			};
-
-			timrot@80068000 {
-				compatible = "fsl,imx23-timrot", "fsl,timrot";
-				reg = <0x80068000 0x2000>;
-				interrupts = <28 29 30 31>;
-				clocks = <&clks 28>;
-			};
-
-			auart0: serial@8006c000 {
-				compatible = "fsl,imx23-auart";
-				reg = <0x8006c000 0x2000>;
-				interrupts = <24>;
-				clocks = <&clks 32>;
-				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			auart1: serial@8006e000 {
-				compatible = "fsl,imx23-auart";
-				reg = <0x8006e000 0x2000>;
-				interrupts = <59>;
-				clocks = <&clks 32>;
-				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			duart: serial@80070000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x80070000 0x2000>;
-				interrupts = <0>;
-				clocks = <&clks 32>, <&clks 16>;
-				clock-names = "uart", "apb_pclk";
-				status = "disabled";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				compatible = "fsl,imx23-usbphy";
-				reg = <0x8007c000 0x2000>;
-				clocks = <&clks 41>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80080000 0x80000>;
-		ranges;
-
-		usb0: usb@80080000 {
-			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
-			reg = <0x80080000 0x40000>;
-			interrupts = <11>;
-			fsl,usbphy = <&usbphy0>;
-			clocks = <&clks 40>;
-			status = "disabled";
-		};
-	};
-
-	iio_hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&lradc 8>;
-	};
-};
diff --git a/src/arm/imx25-eukrea-cpuimx25.dtsi b/src/arm/imx25-eukrea-cpuimx25.dtsi
deleted file mode 100644
index d6f27641c0ef..000000000000
--- a/src/arm/imx25-eukrea-cpuimx25.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX25";
-	compatible = "eukrea,cpuimx25", "fsl,imx25";
-
-	memory {
-		reg = <0x80000000 0x4000000>; /* 64M */
-	};
-};
-
-&fec {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-cpuimx25 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
-				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
-				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
-				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
-				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
-				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
-				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
deleted file mode 100644
index 68d0834a2d1e..000000000000
--- a/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	cmo_qvga: display {
-		model = "CMO-QVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xcad08b80>;
-		bus-width = <18>;
-		native-mode = <&qvga_timings>;
-		display-timings {
-			qvga_timings: 320x240 {
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <30>;
-				hfront-porch = <38>;
-				vback-porch = <20>;
-				vfront-porch = <3>;
-				hsync-len = <15>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_lcd_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
-		};
-	};
-};
-
-&lcdc {
-	display = <&cmo_qvga>;
-	fsl,lpccr = <0x00a903ff>;
-	lcd-supply = <&reg_lcd_3v3>;
-	status = "okay";
-};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
deleted file mode 100644
index 8eee2f65fe00..000000000000
--- a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	dvi_svga: display {
-		model = "DVI-SVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfa208b80>;
-		bus-width = <18>;
-		native-mode = <&dvi_svga_timings>;
-		display-timings {
-			dvi_svga_timings: 800x600 {
-				clock-frequency = <40000000>;
-				hactive = <800>;
-				vactive = <600>;
-				hback-porch = <75>;
-				hfront-porch = <75>;
-				vback-porch = <7>;
-				vfront-porch = <75>;
-				hsync-len = <7>;
-				vsync-len = <7>;
-			};
-		};
-	};
-};
-
-&lcdc {
-	display = <&dvi_svga>;
-	status = "okay";
-};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
deleted file mode 100644
index 447da6263169..000000000000
--- a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	dvi_vga: display {
-		model = "DVI-VGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfa208b80>;
-		bus-width = <18>;
-		native-mode = <&dvi_vga_timings>;
-		display-timings {
-			dvi_vga_timings: 640x480 {
-				clock-frequency = <31250000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <100>;
-				hfront-porch = <100>;
-				vback-porch = <7>;
-				vfront-porch = <100>;
-				hsync-len = <7>;
-				vsync-len = <7>;
-			};
-		};
-	};
-};
-
-&lcdc {
-	display = <&dvi_vga>;
-	status = "okay";
-};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
deleted file mode 100644
index ed1d0b4578ef..000000000000
--- a/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx25-eukrea-cpuimx25.dtsi"
-
-/ {
-	model = "Eukrea MBIMXSD25";
-	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		bp1 {
-			label = "BP1";
-			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioled>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx25-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 20>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX25_PAD_KPP_COL3__AUD5_TXFS		0xe0
-				MX25_PAD_KPP_COL2__AUD5_TXC		0xe0
-				MX25_PAD_KPP_COL1__AUD5_RXD		0xe0
-				MX25_PAD_KPP_COL0__AUD5_TXD		0xe0
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX25_PAD_SD1_CMD__SD1_CMD		0x400000c0
-				MX25_PAD_SD1_CLK__SD1_CLK		0x400000c0
-				MX25_PAD_SD1_DATA0__SD1_DATA0		0x400000c0
-				MX25_PAD_SD1_DATA1__SD1_DATA1		0x400000c0
-				MX25_PAD_SD1_DATA2__SD1_DATA2		0x400000c0
-				MX25_PAD_SD1_DATA3__SD1_DATA3		0x400000c0
-			>;
-		};
-
-		pinctrl_gpiokeys: gpiokeysgrp {
-			fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
-		};
-
-		pinctrl_gpioled: gpioledgrp {
-			fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
-		};
-
-		pinctrl_lcdc: lcdcgrp {
-			fsl,pins = <
-				MX25_PAD_LD0__LD0			0x1
-				MX25_PAD_LD1__LD1			0x1
-				MX25_PAD_LD2__LD2			0x1
-				MX25_PAD_LD3__LD3			0x1
-				MX25_PAD_LD4__LD4			0x1
-				MX25_PAD_LD5__LD5			0x1
-				MX25_PAD_LD6__LD6			0x1
-				MX25_PAD_LD7__LD7			0x1
-				MX25_PAD_LD8__LD8			0x1
-				MX25_PAD_LD9__LD9			0x1
-				MX25_PAD_LD10__LD10			0x1
-				MX25_PAD_LD11__LD11			0x1
-				MX25_PAD_LD12__LD12			0x1
-				MX25_PAD_LD13__LD13			0x1
-				MX25_PAD_LD14__LD14			0x1
-				MX25_PAD_LD15__LD15			0x1
-				MX25_PAD_GPIO_E__LD16			0x1
-				MX25_PAD_GPIO_F__LD17			0x1
-				MX25_PAD_HSYNC__HSYNC			0x80000000
-				MX25_PAD_VSYNC__VSYNC			0x80000000
-				MX25_PAD_LSCLK__LSCLK			0x80000000
-				MX25_PAD_OE_ACD__OE_ACD			0x80000000
-				MX25_PAD_CONTRAST__CONTRAST		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
-				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
-				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
-				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX25_PAD_UART2_RXD__UART2_RXD		0x80000000
-				MX25_PAD_UART2_TXD__UART2_TXD		0x80000000
-				MX25_PAD_UART2_RTS__UART2_RTS		0x80000000
-				MX25_PAD_UART2_CTS__UART2_CTS		0x80000000
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/src/arm/imx25-karo-tx25.dts b/src/arm/imx25-karo-tx25.dts
deleted file mode 100644
index 9b31faa96377..000000000000
--- a/src/arm/imx25-karo-tx25.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx25.dtsi"
-
-/ {
-	model = "Ka-Ro TX25";
-	compatible = "karo,imx25-tx25", "fsl,imx25";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_phy: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-phy";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 9 0>;
-			enable-active-high;
-		};
-	};
-
-	memory {
-		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
-	};
-};
-
-&iomuxc {
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
-			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
-			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
-			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
-			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
-			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
-			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
-			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
-			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
-			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
-			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
-			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
-			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
-			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
-		>;
-	};
-
-	pinctrl_nfc: nfcgrp {
-		fsl,pins = <
-			MX25_PAD_NF_CE0__NF_CE0		0x80000000
-			MX25_PAD_NFWE_B__NFWE_B		0x80000000
-			MX25_PAD_NFRE_B__NFRE_B		0x80000000
-			MX25_PAD_NFALE__NFALE		0x80000000
-			MX25_PAD_NFCLE__NFCLE		0x80000000
-			MX25_PAD_NFWP_B__NFWP_B		0x80000000
-			MX25_PAD_NFRB__NFRB		0x80000000
-			MX25_PAD_D7__D7			0x80000000
-			MX25_PAD_D6__D6			0x80000000
-			MX25_PAD_D5__D5			0x80000000
-			MX25_PAD_D4__D4			0x80000000
-			MX25_PAD_D3__D3			0x80000000
-			MX25_PAD_D2__D2			0x80000000
-			MX25_PAD_D1__D1			0x80000000
-			MX25_PAD_D0__D0			0x80000000
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-reset-gpios = <&gpio3 7 0>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_fec_phy>;
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-	nand-bus-width = <8>;
-	status = "okay";
-};
diff --git a/src/arm/imx25-pdk.dts b/src/arm/imx25-pdk.dts
deleted file mode 100644
index 9c21b1583762..000000000000
--- a/src/arm/imx25-pdk.dts
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx25.dtsi"
-
-/ {
-	model = "Freescale i.MX25 Product Development Kit";
-	compatible = "fsl,imx25-pdk", "fsl,imx25";
-
-	memory {
-		reg = <0x80000000 0x4000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 3 0>;
-			enable-active-high;
-		};
-
-		reg_2p5v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_can_3v3: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 6 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx25-pdk-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx25-pdk-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_3v3>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 1 0>;
-	wp-gpios = <&gpio2 0 0>;
-	status = "okay";
-};
-
-&fec {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-supply = <&reg_fec_3v3>;
-	phy-reset-gpios = <&gpio4 8 0>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks 129>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	imx25-pdk {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX25_PAD_RW__AUD4_TXFS			0xe0
-				MX25_PAD_OE__AUD4_TXC			0xe0
-				MX25_PAD_EB0__AUD4_TXD			0xe0
-				MX25_PAD_EB1__AUD4_RXD			0xe0
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX25_PAD_GPIO_A__CAN1_TX		0x0
-				MX25_PAD_GPIO_B__CAN1_RX		0x0
-				MX25_PAD_D14__GPIO_4_6 			0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX25_PAD_SD1_CMD__SD1_CMD		0x80000000
-				MX25_PAD_SD1_CLK__SD1_CLK		0x80000000
-				MX25_PAD_SD1_DATA0__SD1_DATA0		0x80000000
-				MX25_PAD_SD1_DATA1__SD1_DATA1		0x80000000
-				MX25_PAD_SD1_DATA2__SD1_DATA2		0x80000000
-				MX25_PAD_SD1_DATA3__SD1_DATA3		0x80000000
-				MX25_PAD_A14__GPIO_2_0			0x80000000
-				MX25_PAD_A15__GPIO_2_1			0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
-				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
-				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
-				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
-				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
-				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
-				MX25_PAD_A17__GPIO_2_3			0x80000000
-				MX25_PAD_D12__GPIO_4_8			0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
-				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX25_PAD_KPP_ROW0__KPP_ROW0	0x80000000
-				MX25_PAD_KPP_ROW1__KPP_ROW1	0x80000000
-				MX25_PAD_KPP_ROW2__KPP_ROW2	0x80000000
-				MX25_PAD_KPP_ROW3__KPP_ROW3	0x80000000
-				MX25_PAD_KPP_COL0__KPP_COL0	0x80000000
-				MX25_PAD_KPP_COL1__KPP_COL1	0x80000000
-				MX25_PAD_KPP_COL2__KPP_COL2	0x80000000
-				MX25_PAD_KPP_COL3__KPP_COL3	0x80000000
-			>;
-		};
-
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
-				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
-				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
-				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-			MATRIX_KEY(0x0, 0x0, KEY_UP)
-			MATRIX_KEY(0x0, 0x1, KEY_DOWN)
-			MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0x0, 0x3, KEY_HOME)
-			MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
-			MATRIX_KEY(0x1, 0x1, KEY_LEFT)
-			MATRIX_KEY(0x1, 0x2, KEY_ENTER)
-			MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
-			MATRIX_KEY(0x2, 0x0, KEY_F6)
-			MATRIX_KEY(0x2, 0x1, KEY_F8)
-			MATRIX_KEY(0x2, 0x2, KEY_F9)
-			MATRIX_KEY(0x2, 0x3, KEY_F10)
-			MATRIX_KEY(0x3, 0x0, KEY_F1)
-			MATRIX_KEY(0x3, 0x1, KEY_F2)
-			MATRIX_KEY(0x3, 0x2, KEY_F3)
-			MATRIX_KEY(0x3, 0x2, KEY_POWER)
-	>;
-	status = "okay";
-};
-
-&ssi1 {
-	codec-handle = <&codec>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/src/arm/imx25-pinfunc.h b/src/arm/imx25-pinfunc.h
deleted file mode 100644
index 9238a95d8e62..000000000000
--- a/src/arm/imx25-pinfunc.h
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- * Based on imx35-pinfunc.h in the same directory Which is:
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX25_PINFUNC_H
-#define __DTS_IMX25_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-
-#define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
-#define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_A13__A13			0x00c 0x22C 0x000 0x00 0x000
-#define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
-
-#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x10 0x000
-#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x15 0x000
-
-#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x10 0x000
-#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x15 0x000
-
-#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x10 0x000
-#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x10 0x000
-#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x15 0x000
-
-#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x10 0x000
-#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x15 0x000
-#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x17 0x000
-
-#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x10 0x000
-#define MX25_PAD_A19__FEC_RX_ER			0x024 0x240 0x518 0x17 0x000
-#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x15 0x000
-
-#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x10 0x000
-#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x15 0x000
-#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x17 0x000
-
-#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x10 0x000
-#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x15 0x000
-#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x17 0x000
-
-#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x10 0x000
-#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x10 0x000
-#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x15 0x000
-
-#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x10 0x000
-#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x15 0x000
-#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x17 0x000
-
-#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x10 0x000
-#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x15 0x000
-#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x17 0x000
-
-#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x10 0x000
-#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x14 0x000
-#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x15 0x000
-
-#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x10 0x000
-#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x14 0x000
-#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x15 0x000
-
-#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x10 0x000
-#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x14 0x000
-#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x15 0x000
-
-#define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
-#define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_CS1__CS1			0x050 0x000 0x000 0x00 0x000
-#define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
-#define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x10 0x000
-#define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
-#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x13 0x000
-#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x15 0x000
-
-#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x10 0x000
-#define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
-#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x13 0x000
-#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x15 0x000
-
-#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x10 0x000
-#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x15 0x000
-
-#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x10 0x000
-#define MX25_PAD_ECB__UART5_TXD_MUX		0x060 0x270 0x000 0x13 0x000
-#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x15 0x000
-
-#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x10 0x000
-#define MX25_PAD_LBA__UART5_RXD_MUX		0x064 0x274 0x578 0x13 0x000
-#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x15 0x000
-
-#define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
-#define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
-
-#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x10 0x000
-#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x14 0x000
-#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x15 0x000
-
-#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x10 0x000
-#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x15 0x000
-
-#define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
-#define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
-#define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
-
-#define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
-#define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
-#define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
-
-#define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
-#define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
-#define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
-
-#define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
-#define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
-
-#define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
-#define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
-
-#define MX25_PAD_D10__D10			0x09c 0x294 0x000 0x00 0x000
-#define MX25_PAD_D10__GPIO_4_10			0x09c 0x294 0x000 0x05 0x000
-#define MX25_PAD_D10__USBOTG_OC			0x09c 0x294 0x57c 0x06 0x000
-
-#define MX25_PAD_D9__D9				0x0a0 0x298 0x000 0x00 0x000
-#define MX25_PAD_D9__GPIO_4_11			0x0a0 0x298 0x000 0x05 0x000
-#define MX25_PAD_D9__USBH2_PWR			0x0a0 0x298 0x000 0x06 0x000
-
-#define MX25_PAD_D8__D8				0x0a4 0x29c 0x000 0x00 0x000
-#define MX25_PAD_D8__GPIO_4_12			0x0a4 0x29c 0x000 0x05 0x000
-#define MX25_PAD_D8__USBH2_OC			0x0a4 0x29c 0x580 0x06 0x000
-
-#define MX25_PAD_D7__D7				0x0a8 0x2a0 0x000 0x00 0x000
-#define MX25_PAD_D7__GPIO_4_13			0x0a8 0x2a0 0x000 0x05 0x000
-
-#define MX25_PAD_D6__D6				0x0ac 0x2a4 0x000 0x00 0x000
-#define MX25_PAD_D6__GPIO_4_14			0x0ac 0x2a4 0x000 0x05 0x000
-
-#define MX25_PAD_D5__D5				0x0b0 0x2a8 0x000 0x00 0x000
-#define MX25_PAD_D5__GPIO_4_15			0x0b0 0x2a8 0x000 0x05 0x000
-
-#define MX25_PAD_D4__D4				0x0b4 0x2ac 0x000 0x00 0x000
-#define MX25_PAD_D4__GPIO_4_16			0x0b4 0x2ac 0x000 0x05 0x000
-
-#define MX25_PAD_D3__D3				0x0b8 0x2b0 0x000 0x00 0x000
-#define MX25_PAD_D3__GPIO_4_17			0x0b8 0x2b0 0x000 0x05 0x000
-
-#define MX25_PAD_D2__D2				0x0bc 0x2b4 0x000 0x00 0x000
-#define MX25_PAD_D2__GPIO_4_18			0x0bc 0x2b4 0x000 0x05 0x000
-
-#define MX25_PAD_D1__D1				0x0c0 0x2b8 0x000 0x00 0x000
-#define MX25_PAD_D1__GPIO_4_19			0x0c0 0x2b8 0x000 0x05 0x000
-
-#define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
-#define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
-
-#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x10 0x000
-#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x12 0x000
-#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x15 0x000
-
-#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x10 0x000
-#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x12 0x000
-#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x15 0x000
-
-#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x10 0x000
-#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x15 0x000
-
-#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x10 0x000
-#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x15 0x000
-
-#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x10 0x000
-#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x15 0x000
-
-#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x10 0x000
-#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x15 0x000
-
-#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x10 0x000
-#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x15 0x000
-
-#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x10 0x000
-#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x15 0x000
-
-#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x10 0x000
-#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x15 0x000
-
-#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x10 0x000
-#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x15 0x001
-
-#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x10 0x000
-#define MX25_PAD_LD10__FEC_RX_ER		0x0f0 0x2e8 0x518 0x15 0x001
-
-#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x10 0x000
-#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x15 0x001
-
-#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x10 0x000
-#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x15 0x001
-
-#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x10 0x000
-#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x15 0x000
-
-#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x10 0x000
-#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x15 0x000
-
-#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x10 0x000
-#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x15 0x001
-
-#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x10 0x000
-#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x15 0x000
-
-#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x10 0x000
-#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x15 0x000
-
-#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x10 0x000
-#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x15 0x000
-
-#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x10 0x000
-#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x15 0x000
-
-#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x10 0x000
-#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x14 0x000
-#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x15 0x001
-
-#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x10 0x000
-#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x15 0x000
-#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x16 0x001
-
-#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x10 0x000
-#define MX25_PAD_CSI_D2__UART5_RXD_MUX		0x120 0x318 0x578 0x11 0x001
-#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x15 0x000
-#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x17 0x000
-
-#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x15 0x000
-#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x17 0x001
-
-#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x10 0x000
-#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x11 0x001
-#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x15 0x000
-#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x000 0x17 0x000
-
-#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x10 0x000
-#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x15 0x000
-#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x17 0x000
-
-#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x10 0x000
-#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x10 0x000
-#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x10 0x000
-#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x10 0x000
-#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x10 0x000
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x10 0x000
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x10 0x000
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x15 0x000
-
-#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x10 0x000
-#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x15 0x000
-
-#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x10 0x000
-#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x10 0x000
-#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x10 0x000
-#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x10 0x000
-#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x11 0x001
-#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x10 0x000
-#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x11 0x001
-#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x10 0x000
-#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x10 0x000
-#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x10 0x000
-#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x12 0x002
-#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_CTS__FEC_RX_ER		0x18c 0x384 0x518 0x12 0x002
-#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x10 0x000
-#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
-#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x12 0x002
-#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x10 0x000
-#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x12 0x002
-#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x13 0x000
-#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x15 0x002
-#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x10 0x002
-#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x13 0x002
-#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW3__CSI_LD1		0x1b4 0x3ac 0x48c 0x13 0x002
-#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL0__UART4_RXD_MUX	0x1b8 0x3b0 0x570 0x11 0x001
-#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL1__UART4_TXD_MUX	0x1bc 0x3b4 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x12 0x001
-#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x12 0x001
-#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x12 0x001
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x10 0x000
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x10 0x000
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x10 0x000
-#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x14 0x000
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x15 0x000
-
-#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x10 0x000
-#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x11 0x000
-#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x15 0x000
-
-#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x10 0x000
-#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x15 0x000
-
-#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
-
-#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x10 0x000
-#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x16 0x000
-#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x12 0x000
-
-#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x10 0x000
-#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
-#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x12 0x001
-
-#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x10 0x000
-#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x16 0x000
-
-#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x10 0x000
-#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
-#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x16 0x001
-
-#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x10 0x000
-#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
-#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x14 0x000
-
-#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x10 0x000
-#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x14 0x000
-
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x10 0x000
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x10 0x000
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x10 0x000
-#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x14 0x000
-#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x15 0x000
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x10 0x000
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x15 0x000
-
-#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x10 0x000
-#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x14 0x001
-#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x15 0x000
-
-#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x10 0x000
-#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x15 0x000
-
-#define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
-#define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
-#define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
-#define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
-
-#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/src/arm/imx25.dtsi b/src/arm/imx25.dtsi
deleted file mode 100644
index c1740396b2c9..000000000000
--- a/src/arm/imx25.dtsi
+++ /dev/null
@@ -1,567 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-#include "imx25-pinfunc.h"
-
-/ {
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		mmc0 = &esdhc1;
-		mmc1 = &esdhc2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		spi0 = &spi1;
-		spi1 = &spi2;
-		spi2 = &spi3;
-		usb0 = &usbotg;
-		usb1 = &usbhost1;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	asic: asic-interrupt-controller@68000000 {
-		compatible = "fsl,imx25-asic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x68000000 0x8000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&asic>;
-		ranges;
-
-		aips@43f00000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x43f00000 0x100000>;
-			ranges;
-
-			i2c1: i2c@43f80000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
-				reg = <0x43f80000 0x4000>;
-				clocks = <&clks 48>;
-				clock-names = "";
-				interrupts = <3>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@43f84000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
-				reg = <0x43f84000 0x4000>;
-				clocks = <&clks 48>;
-				clock-names = "";
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			can1: can@43f88000 {
-				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
-				reg = <0x43f88000 0x4000>;
-				interrupts = <43>;
-				clocks = <&clks 75>, <&clks 75>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			can2: can@43f8c000 {
-				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
-				reg = <0x43f8c000 0x4000>;
-				interrupts = <44>;
-				clocks = <&clks 76>, <&clks 76>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart1: serial@43f90000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x43f90000 0x4000>;
-				interrupts = <45>;
-				clocks = <&clks 120>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@43f94000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x43f94000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks 121>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@43f98000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
-				reg = <0x43f98000 0x4000>;
-				clocks = <&clks 48>;
-				clock-names = "";
-				interrupts = <4>;
-				status = "disabled";
-			};
-
-			owire@43f9c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x43f9c000 0x4000>;
-				clocks = <&clks 51>;
-				clock-names = "";
-				interrupts = <2>;
-				status = "disabled";
-			};
-
-			spi1: cspi@43fa4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
-				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 62>, <&clks 62>;
-				clock-names = "ipg", "per";
-				interrupts = <14>;
-				status = "disabled";
-			};
-
-			kpp: kpp@43fa8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
-				reg = <0x43fa8000 0x4000>;
-				clocks = <&clks 102>;
-				clock-names = "";
-				interrupts = <24>;
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@43fac000 {
-				compatible = "fsl,imx25-iomuxc";
-				reg = <0x43fac000 0x4000>;
-			};
-
-			audmux: audmux@43fb0000 {
-				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
-				reg = <0x43fb0000 0x4000>;
-				status = "disabled";
-			};
-		};
-
-		spba@50000000 {
-			compatible = "fsl,spba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x40000>;
-			ranges;
-
-			spi3: cspi@50004000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
-				reg = <0x50004000 0x4000>;
-				interrupts = <0>;
-				clocks = <&clks 80>, <&clks 80>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@50008000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x50008000 0x4000>;
-				interrupts = <5>;
-				clocks = <&clks 123>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@5000c000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x5000c000 0x4000>;
-				interrupts = <18>;
-				clocks = <&clks 122>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			spi2: cspi@50010000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
-				reg = <0x50010000 0x4000>;
-				clocks = <&clks 79>, <&clks 79>;
-				clock-names = "ipg", "per";
-				interrupts = <13>;
-				status = "disabled";
-			};
-
-			ssi2: ssi@50014000 {
-				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
-				reg = <0x50014000 0x4000>;
-				interrupts = <11>;
-				clocks = <&clks 118>;
-				clock-names = "ipg";
-				dmas = <&sdma 24 1 0>,
-				       <&sdma 25 1 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			esai@50018000 {
-				reg = <0x50018000 0x4000>;
-				interrupts = <7>;
-			};
-
-			uart5: serial@5002c000 {
-				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-				reg = <0x5002c000 0x4000>;
-				interrupts = <40>;
-				clocks = <&clks 124>, <&clks 57>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			tsc: tsc@50030000 {
-				compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
-				reg = <0x50030000 0x4000>;
-				interrupts = <46>;
-				clocks = <&clks 119>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			ssi1: ssi@50034000 {
-				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
-				reg = <0x50034000 0x4000>;
-				interrupts = <12>;
-				clocks = <&clks 117>;
-				clock-names = "ipg";
-				dmas = <&sdma 28 1 0>,
-				       <&sdma 29 1 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			fec: ethernet@50038000 {
-				compatible = "fsl,imx25-fec";
-				reg = <0x50038000 0x4000>;
-				interrupts = <57>;
-				clocks = <&clks 88>, <&clks 65>;
-				clock-names = "ipg", "ahb";
-				status = "disabled";
-			};
-		};
-
-		aips@53f00000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x53f00000 0x100000>;
-			ranges;
-
-			clks: ccm@53f80000 {
-				compatible = "fsl,imx25-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <31>;
-				#clock-cells = <1>;
-			};
-
-			gpt4: timer@53f84000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f84000 0x4000>;
-				clocks = <&clks 95>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <1>;
-			};
-
-			gpt3: timer@53f88000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f88000 0x4000>;
-				clocks = <&clks 94>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <29>;
-			};
-
-			gpt2: timer@53f8c000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f8c000 0x4000>;
-				clocks = <&clks 93>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <53>;
-			};
-
-			gpt1: timer@53f90000 {
-				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
-				reg = <0x53f90000 0x4000>;
-				clocks = <&clks 92>, <&clks 47>;
-				clock-names = "ipg", "per";
-				interrupts = <54>;
-			};
-
-			epit1: timer@53f94000 {
-				compatible = "fsl,imx25-epit";
-				reg = <0x53f94000 0x4000>;
-				interrupts = <28>;
-			};
-
-			epit2: timer@53f98000 {
-				compatible = "fsl,imx25-epit";
-				reg = <0x53f98000 0x4000>;
-				interrupts = <27>;
-			};
-
-			gpio4: gpio@53f9c000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53f9c000 0x4000>;
-				interrupts = <23>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			pwm2: pwm@53fa0000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
-				reg = <0x53fa0000 0x4000>;
-				clocks = <&clks 106>, <&clks 36>;
-				clock-names = "ipg", "per";
-				interrupts = <36>;
-			};
-
-			gpio3: gpio@53fa4000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <16>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			pwm3: pwm@53fa8000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
-				reg = <0x53fa8000 0x4000>;
-				clocks = <&clks 107>, <&clks 36>;
-				clock-names = "ipg", "per";
-				interrupts = <41>;
-			};
-
-			esdhc1: esdhc@53fb4000 {
-				compatible = "fsl,imx25-esdhc";
-				reg = <0x53fb4000 0x4000>;
-				interrupts = <9>;
-				clocks = <&clks 86>, <&clks 63>, <&clks 45>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			esdhc2: esdhc@53fb8000 {
-				compatible = "fsl,imx25-esdhc";
-				reg = <0x53fb8000 0x4000>;
-				interrupts = <8>;
-				clocks = <&clks 87>, <&clks 64>, <&clks 46>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			lcdc: lcdc@53fbc000 {
-				compatible = "fsl,imx25-fb", "fsl,imx21-fb";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <39>;
-				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			slcdc@53fc0000 {
-				reg = <0x53fc0000 0x4000>;
-				interrupts = <38>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@53fc8000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				reg = <0x53fc8000 0x4000>;
-				clocks = <&clks 108>, <&clks 36>;
-				clock-names = "ipg", "per";
-				interrupts = <42>;
-			};
-
-			gpio1: gpio@53fcc000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53fcc000 0x4000>;
-				interrupts = <52>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@53fd0000 {
-				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
-				reg = <0x53fd0000 0x4000>;
-				interrupts = <51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sdma: sdma@53fd4000 {
-				compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
-				reg = <0x53fd4000 0x4000>;
-				clocks = <&clks 112>, <&clks 68>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				interrupts = <34>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
-			};
-
-			wdog@53fdc000 {
-				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
-				reg = <0x53fdc000 0x4000>;
-				clocks = <&clks 126>;
-				clock-names = "";
-				interrupts = <55>;
-			};
-
-			pwm1: pwm@53fe0000 {
-				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
-				reg = <0x53fe0000 0x4000>;
-				clocks = <&clks 105>, <&clks 36>;
-				clock-names = "ipg", "per";
-				interrupts = <26>;
-			};
-
-			iim: iim@53ff0000 {
-				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
-				reg = <0x53ff0000 0x4000>;
-				interrupts = <19>;
-				clocks = <&clks 99>;
-			};
-
-			usbotg: usb@53ff4000 {
-				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
-				reg = <0x53ff4000 0x0200>;
-				interrupts = <37>;
-				clocks = <&clks 70>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,usbphy = <&usbphy0>;
-				status = "disabled";
-			};
-
-			usbhost1: usb@53ff4400 {
-				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
-				reg = <0x53ff4400 0x0200>;
-				interrupts = <35>;
-				clocks = <&clks 70>;
-				fsl,usbmisc = <&usbmisc 1>;
-				fsl,usbphy = <&usbphy1>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@53ff4600 {
-				#index-cells = <1>;
-				compatible = "fsl,imx25-usbmisc";
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
-				reg = <0x53ff4600 0x00f>;
-			};
-
-			dryice@53ffc000 {
-				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
-				reg = <0x53ffc000 0x4000>;
-				clocks = <&clks 81>;
-				clock-names = "ipg";
-				interrupts = <25>;
-			};
-		};
-
-		iram: sram@78000000 {
-			compatible = "mmio-sram";
-			reg = <0x78000000 0x20000>;
-		};
-
-		emi@80000000 {
-			compatible = "fsl,emi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x3b002000>;
-			ranges;
-
-			nfc: nand@bb000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				compatible = "fsl,imx25-nand";
-				reg = <0xbb000000 0x2000>;
-				clocks = <&clks 50>;
-				clock-names = "";
-				interrupts = <33>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-		};
-	};
-};
diff --git a/src/arm/imx27-apf27.dts b/src/arm/imx27-apf27.dts
deleted file mode 100644
index 73aae4f5e539..000000000000
--- a/src/arm/imx27-apf27.dts
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
- * Copyright 2012 Armadeus Systems <support@armadeus.com>
- *
- * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Armadeus Systems APF27 module";
-	compatible = "armadeus,imx27-apf27", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x04000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc26m {
-			compatible = "fsl,imx-osc26m", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-	};
-};
-
-&iomuxc {
-	imx27-apf27 {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&nfc {
-	status = "okay";
-	nand-bus-width = <16>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0 0x100000>;
-	};
-
-	partition@100000 {
-		label = "env";
-		reg = <0x100000 0x80000>;
-	};
-
-	partition@180000 {
-		label = "env2";
-		reg = <0x180000 0x80000>;
-	};
-
-	partition@200000 {
-		label = "firmware";
-		reg = <0x200000 0x80000>;
-	};
-
-	partition@280000 {
-		label = "dtb";
-		reg = <0x280000 0x80000>;
-	};
-
-	partition@300000 {
-		label = "kernel";
-		reg = <0x300000 0x500000>;
-	};
-
-	partition@800000 {
-		label = "rootfs";
-		reg = <0x800000 0xf800000>;
-	};
-};
diff --git a/src/arm/imx27-apf27dev.dts b/src/arm/imx27-apf27dev.dts
deleted file mode 100644
index 2b6d489dae69..000000000000
--- a/src/arm/imx27-apf27dev.dts
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Copyright 2013 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/* APF27Dev is a docking board for the APF27 SOM */
-#include "imx27-apf27.dts"
-
-/ {
-	model = "Armadeus Systems APF27Dev docking/development board";
-	compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
-
-	display: display {
-		model = "Chimei-LW700AT9003";
-		native-mode = <&timing0>;
-		bits-per-pixel = <16>;  /* non-standard but required */
-		fsl,pcr = <0xfae80083>;	/* non-standard but required */
-		display-timings {
-			timing0: 800x480 {
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		user-key {
-			label = "user";
-			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
-			linux,code = <276>; /* BTN_EXTRA */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
-	status = "okay";
-};
-
-&cspi2 {
-	fsl,spi-num-chipselects = <3>;
-	cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
-		   <&gpio4 27 GPIO_ACTIVE_LOW>,
-		   <&gpio2 17 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
-	status = "okay";
-};
-
-&fb {
-	display = <&display>;
-	fsl,dmacr = <0x00020010>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_imxfb1>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,ds1374";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx27-apf27dev {
-		pinctrl_cspi1: cspi1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
-				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
-				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
-			>;
-		};
-
-		pinctrl_cspi1_cs: cspi1csgrp {
-			fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
-		};
-
-		pinctrl_cspi2: cspi2grp {
-			fsl,pins = <
-				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
-				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
-				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
-			>;
-		};
-
-		pinctrl_cspi2_cs: cspi2csgrp {
-			fsl,pins = <
-				MX27_PAD_CSI_D5__GPIO2_17 0x0
-				MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
-				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
-		};
-
-		pinctrl_imxfb1: imxfbgrp {
-			fsl,pins = <
-				MX27_PAD_CLS__CLS 0x0
-				MX27_PAD_CONTRAST__CONTRAST 0x0
-				MX27_PAD_LD0__LD0 0x0
-				MX27_PAD_LD1__LD1 0x0
-				MX27_PAD_LD2__LD2 0x0
-				MX27_PAD_LD3__LD3 0x0
-				MX27_PAD_LD4__LD4 0x0
-				MX27_PAD_LD5__LD5 0x0
-				MX27_PAD_LD6__LD6 0x0
-				MX27_PAD_LD7__LD7 0x0
-				MX27_PAD_LD8__LD8 0x0
-				MX27_PAD_LD9__LD9 0x0
-				MX27_PAD_LD10__LD10 0x0
-				MX27_PAD_LD11__LD11 0x0
-				MX27_PAD_LD12__LD12 0x0
-				MX27_PAD_LD13__LD13 0x0
-				MX27_PAD_LD14__LD14 0x0
-				MX27_PAD_LD15__LD15 0x0
-				MX27_PAD_LD16__LD16 0x0
-				MX27_PAD_LD17__LD17 0x0
-				MX27_PAD_LSCLK__LSCLK 0x0
-				MX27_PAD_OE_ACD__OE_ACD 0x0
-				MX27_PAD_PS__PS 0x0
-				MX27_PAD_REV__REV 0x0
-				MX27_PAD_SPL_SPR__SPL_SPR 0x0
-				MX27_PAD_HSYNC__HSYNC 0x0
-				MX27_PAD_VSYNC__VSYNC 0x0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA 0x0
-				MX27_PAD_I2C_CLK__I2C_CLK 0x0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_pwm: pwmgrp {
-			fsl,pins = <
-				MX27_PAD_PWMO__PWMO 0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK 0x0
-				MX27_PAD_SD2_CMD__SD2_CMD 0x0
-				MX27_PAD_SD2_D0__SD2_D0 0x0
-				MX27_PAD_SD2_D1__SD2_D1 0x0
-				MX27_PAD_SD2_D2__SD2_D2 0x0
-				MX27_PAD_SD2_D3__SD2_D3 0x0
-			>;
-		};
-
-		pinctrl_sdhc2_cd: sdhc2cdgrp {
-			fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
-		};
-	};
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm>;
-};
diff --git a/src/arm/imx27-eukrea-cpuimx27.dtsi b/src/arm/imx27-eukrea-cpuimx27.dtsi
deleted file mode 100644
index e2242638ea0b..000000000000
--- a/src/arm/imx27-eukrea-cpuimx27.dtsi
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX27";
-	compatible = "eukrea,cpuimx27", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x04000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		clk14745600: clock@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <14745600>;
-			reg = <0>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire>;
-	status = "okay";
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh2>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor: nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x04000000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
-	};
-
-	uart8250@3,200000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_1>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x200000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,400000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_2>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x400000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,800000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_3>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x800000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-
-	uart8250@3,1000000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart8250_4>;
-		compatible = "ns8250";
-		clocks = <&clk14745600>;
-		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
-		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
-		reg = <3 0x1000000 0x1000>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		no-loopback-test;
-	};
-};
-
-&iomuxc {
-	imx27-eukrea-cpuimx27 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
-				MX27_PAD_ATA_DATA13__FEC_COL		0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA		0x0
-				MX27_PAD_I2C_CLK__I2C_CLK		0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB			0x0
-				MX27_PAD_NFCLE__NFCLE			0x0
-				MX27_PAD_NFWP_B__NFWP_B			0x0
-				MX27_PAD_NFCE_B__NFCE_B			0x0
-				MX27_PAD_NFALE__NFALE			0x0
-				MX27_PAD_NFRE_B__NFRE_B			0x0
-				MX27_PAD_NFWE_B__NFWE_B			0x0
-			>;
-		};
-
-		pinctrl_owire: owiregrp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE			0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK		0x0
-				MX27_PAD_SD2_CMD__SD2_CMD		0x0
-				MX27_PAD_SD2_D0__SD2_D0			0x0
-				MX27_PAD_SD2_D1__SD2_D1			0x0
-				MX27_PAD_SD2_D2__SD2_D2			0x0
-				MX27_PAD_SD2_D3__SD2_D3			0x0
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
-				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
-				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
-				MX27_PAD_USBH1_FS__UART4_RTS		0x0
-			>;
-		};
-
-		pinctrl_uart8250_1: uart82501grp {
-			fsl,pins = <
-				MX27_PAD_USB_PWR__GPIO2_23		0x0
-			>;
-		};
-
-		pinctrl_uart8250_2: uart82502grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
-			>;
-		};
-
-		pinctrl_uart8250_3: uart82503grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
-			>;
-		};
-
-		pinctrl_uart8250_4: uart82504grp {
-			fsl,pins = <
-				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
-			>;
-		};
-
-		pinctrl_usbh2: usbh2grp {
-			fsl,pins = <
-				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
-				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
-				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
-				MX27_PAD_USBH2_STP__USBH2_STP		0x0
-				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
-				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
-				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
-				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
-				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
-				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
-				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
-				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
-				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
-				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
-				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
-				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
-				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
-				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
-				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
-				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
-				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
-				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
-				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
-			>;
-		};
-	};
-};
diff --git a/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts b/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
deleted file mode 100644
index 2ab65fc4c1e1..000000000000
--- a/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx27-eukrea-cpuimx27.dtsi"
-
-/ {
-	model = "Eukrea MBIMXSD27";
-	compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
-
-	display0: CMO-QVGA {
-		model = "CMO-QVGA";
-		native-mode = <&timing0>;
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xfad08b80>;
-
-		display-timings {
-			timing0: 320x240 {
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <20>;
-				hsync-len = <30>;
-				hfront-porch = <38>;
-				vback-porch = <4>;
-				vsync-len = <3>;
-				vfront-porch = <15>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioleds>;
-
-		led1 {
-			label = "system::live";
-			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "system::user";
-			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		reg_lcd: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcdreg>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "LCD";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&cspi1 {
-	pinctrl-0 = <&pinctrl_cspi1>;
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	ads7846 {
-		compatible = "ti,ads7846";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch>;
-		reg = <0>;
-		interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
-		spi-cpol;
-		spi-max-frequency = <1500000>;
-		ti,keep-vref-on;
-	};
-};
-
-&fb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_imxfb>;
-	display = <&display0>;
-	lcd-supply = <&reg_lcd>;
-	fsl,dmacr = <0x00040060>;
-	fsl,lscr1 = <0x00120300>;
-	fsl,lpccr = <0x00a903ff>;
-	status = "okay";
-};
-
-&i2c1 {
-	codec: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&kpp {
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-	>;
-	status = "okay";
-};
-
-&sdhci1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc1>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ssi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	codec-handle = <&codec>;
-	status = "okay";
-};
-
-&uart1 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx27-eukrea-cpuimx27-baseboard {
-		pinctrl_cspi1: cspi1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_MISO__CSPI1_MISO	0x0
-				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI	0x0
-				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK	0x0
-				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* CS0 */
-			>;
-		};
-
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX27_PAD_PWMO__GPIO5_5		0x0
-			>;
-		};
-
-		pinctrl_gpioleds: gpioledsgrp {
-			fsl,pins = <
-				MX27_PAD_PC_PWRON__GPIO6_16	0x0
-				MX27_PAD_PC_CD2_B__GPIO6_19	0x0
-			>;
-		};
-
-		pinctrl_imxfb: imxfbgrp {
-			fsl,pins = <
-				MX27_PAD_LD0__LD0		0x0
-				MX27_PAD_LD1__LD1		0x0
-				MX27_PAD_LD2__LD2		0x0
-				MX27_PAD_LD3__LD3		0x0
-				MX27_PAD_LD4__LD4		0x0
-				MX27_PAD_LD5__LD5		0x0
-				MX27_PAD_LD6__LD6		0x0
-				MX27_PAD_LD7__LD7		0x0
-				MX27_PAD_LD8__LD8		0x0
-				MX27_PAD_LD9__LD9		0x0
-				MX27_PAD_LD10__LD10		0x0
-				MX27_PAD_LD11__LD11		0x0
-				MX27_PAD_LD12__LD12		0x0
-				MX27_PAD_LD13__LD13		0x0
-				MX27_PAD_LD14__LD14		0x0
-				MX27_PAD_LD15__LD15		0x0
-				MX27_PAD_LD16__LD16		0x0
-				MX27_PAD_LD17__LD17		0x0
-				MX27_PAD_CONTRAST__CONTRAST	0x0
-				MX27_PAD_OE_ACD__OE_ACD		0x0
-				MX27_PAD_HSYNC__HSYNC		0x0
-				MX27_PAD_VSYNC__VSYNC		0x0
-			>;
-		};
-
-		pinctrl_lcdreg: lcdreggrp {
-			fsl,pins = <
-				MX27_PAD_CLS__GPIO1_25		0x0
-			>;
-		};
-
-		pinctrl_sdhc1: sdhc1grp {
-			fsl,pins = <
-				MX27_PAD_SD1_CLK__SD1_CLK	0x0
-				MX27_PAD_SD1_CMD__SD1_CMD	0x0
-				MX27_PAD_SD1_D0__SD1_D0		0x0
-				MX27_PAD_SD1_D1__SD1_D1		0x0
-				MX27_PAD_SD1_D2__SD1_D2		0x0
-				MX27_PAD_SD1_D3__SD1_D3		0x0
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX27_PAD_SSI4_CLK__SSI4_CLK	0x0
-				MX27_PAD_SSI4_FS__SSI4_FS	0x0
-				MX27_PAD_SSI4_RXDAT__SSI4_RXDAT	0x1
-				MX27_PAD_SSI4_TXDAT__SSI4_TXDAT	0x1
-			>;
-		};
-
-		pinctrl_touch: touchgrp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_RDY__GPIO4_25	0x0 /* IRQ */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD	0x0
-				MX27_PAD_UART1_RXD__UART1_RXD	0x0
-				MX27_PAD_UART1_CTS__UART1_CTS	0x0
-				MX27_PAD_UART1_RTS__UART1_RTS	0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX27_PAD_UART2_TXD__UART2_TXD	0x0
-				MX27_PAD_UART2_RXD__UART2_RXD	0x0
-				MX27_PAD_UART2_CTS__UART2_CTS	0x0
-				MX27_PAD_UART2_RTS__UART2_RTS	0x0
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX27_PAD_UART3_TXD__UART3_TXD	0x0
-				MX27_PAD_UART3_RXD__UART3_RXD	0x0
-				MX27_PAD_UART3_CTS__UART3_CTS	0x0
-				MX27_PAD_UART3_RTS__UART3_RTS	0x0
-			>;
-		};
-	};
-};
diff --git a/src/arm/imx27-pdk.dts b/src/arm/imx27-pdk.dts
deleted file mode 100644
index 49450dbbcab8..000000000000
--- a/src/arm/imx27-pdk.dts
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Freescale i.MX27 Product Development Kit";
-	compatible = "fsl,imx27-pdk", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>;
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-		};
-	};
-};
-
-&cspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi2>;
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13783@0 {
-		compatible = "fsl,mc13783";
-		reg = <0>;
-		spi-cs-high;
-		spi-max-frequency = <1000000>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-
-		regulators {
-			vgen_reg: vgen {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vmmc1_reg: vmmc1 {
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			gpo1_reg: gpo1 {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			gpo3_reg: gpo3 {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-mode = "mii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&kpp {
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-		MATRIX_KEY(1, 2, KEY_ENTER)
-		MATRIX_KEY(2, 0, KEY_F6)
-		MATRIX_KEY(2, 1, KEY_F8)
-		MATRIX_KEY(2, 2, KEY_F9)
-		MATRIX_KEY(2, 3, KEY_F10)
-	>;
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart1 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	fsl,usbphy = <&usbphy0>;
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&iomuxc {
-	imx27-pdk {
-		pinctrl_cspi2: cspi2grp {
-			fsl,pins = <
-				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
-				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
-				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
-				MX27_PAD_CSPI2_SS0__GPIO4_21	0x0 /* SPI2 CS0 */
-				MX27_PAD_TOUT__GPIO3_14		0x0 /* PMIC IRQ */
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB	0x0
-				MX27_PAD_NFCLE__NFCLE	0x0
-				MX27_PAD_NFWP_B__NFWP_B	0x0
-				MX27_PAD_NFCE_B__NFCE_B	0x0
-				MX27_PAD_NFALE__NFALE	0x0
-				MX27_PAD_NFRE_B__NFRE_B	0x0
-				MX27_PAD_NFWE_B__NFWE_B	0x0
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-				MX27_PAD_UART1_CTS__UART1_CTS 0x0
-				MX27_PAD_UART1_RTS__UART1_RTS 0x0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
-				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
-				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
-				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
-				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
-				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
-				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
-				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
-				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
-				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
-				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
-				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
-			>;
-		};
-	};
-};
diff --git a/src/arm/imx27-phytec-phycard-s-rdk.dts b/src/arm/imx27-phytec-phycard-s-rdk.dts
deleted file mode 100644
index 7c869fe3c30b..000000000000
--- a/src/arm/imx27-phytec-phycard-s-rdk.dts
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright 2012 Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx27-phytec-phycard-s-som.dtsi"
-
-/ {
-	model = "Phytec pca100 rapid development kit";
-	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	display: display {
-		model = "Primeview-PD050VL1";
-		native-mode = <&timing0>;
-		bits-per-pixel = <16>;  /* non-standard but required */
-		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
-		display-timings {
-			timing0: 640x480 {
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <112>;
-				hfront-porch = <36>;
-				hsync-len = <32>;
-				vback-porch = <33>;
-				vfront-porch = <33>;
-				vsync-len = <2>;
-				clock-frequency = <25000000>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&fb {
-	display = <&display>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	adc@64 {
-		compatible = "maxim,max1037";
-		vcc-supply = <&reg_3v3>;
-		reg = <0x64>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-rdk {
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_owire1: owire1grp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE 0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK 0x0
-				MX27_PAD_SD2_CMD__SD2_CMD 0x0
-				MX27_PAD_SD2_D0__SD2_D0 0x0
-				MX27_PAD_SD2_D1__SD2_D1 0x0
-				MX27_PAD_SD2_D2__SD2_D2 0x0
-				MX27_PAD_SD2_D3__SD2_D3 0x0
-				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-				MX27_PAD_UART1_CTS__UART1_CTS 0x0
-				MX27_PAD_UART1_RTS__UART1_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX27_PAD_UART2_TXD__UART2_TXD 0x0
-				MX27_PAD_UART2_RXD__UART2_RXD 0x0
-				MX27_PAD_UART2_CTS__UART2_CTS 0x0
-				MX27_PAD_UART2_RTS__UART2_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX27_PAD_UART3_TXD__UART3_TXD 0x0
-				MX27_PAD_UART3_RXD__UART3_RXD 0x0
-				MX27_PAD_UART3_CTS__UART3_CTS 0x0
-				MX27_PAD_UART3_RTS__UART3_RTS 0x0
-			>;
-		};
-	};
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire1>;
-	status = "okay";
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&uart1 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
diff --git a/src/arm/imx27-phytec-phycard-s-som.dts b/src/arm/imx27-phytec-phycard-s-som.dts
deleted file mode 100644
index c8d57d1d0743..000000000000
--- a/src/arm/imx27-phytec-phycard-s-som.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 0>,
-		<&gpio4 27 0>;
-	status = "okay";
-};
-
-&fec {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
diff --git a/src/arm/imx27-phytec-phycard-s-som.dtsi b/src/arm/imx27-phytec-phycard-s-som.dtsi
deleted file mode 100644
index 1b6248079682..000000000000
--- a/src/arm/imx27-phytec-phycard-s-som.dtsi
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-som {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB 0x0
-				MX27_PAD_NFCLE__NFCLE 0x0
-				MX27_PAD_NFWP_B__NFWP_B 0x0
-				MX27_PAD_NFCE_B__NFCE_B 0x0
-				MX27_PAD_NFALE__NFALE 0x0
-				MX27_PAD_NFRE_B__NFRE_B 0x0
-				MX27_PAD_NFWE_B__NFWE_B 0x0
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/src/arm/imx27-phytec-phycore-rdk.dts b/src/arm/imx27-phytec-phycore-rdk.dts
deleted file mode 100644
index 538568b0de26..000000000000
--- a/src/arm/imx27-phytec-phycore-rdk.dts
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx27-phytec-phycore-som.dtsi"
-
-/ {
-	model = "Phytec pcm970";
-	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	display0: LQ035Q7 {
-		model = "Sharp-LQ035Q7";
-		native-mode = <&timing0>;
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xf00080c0>;
-
-		display-timings {
-			timing0: 240x320 {
-				clock-frequency = <5500000>;
-				hactive = <240>;
-				vactive = <320>;
-				hback-porch = <5>;
-				hsync-len = <7>;
-				hfront-porch = <16>;
-				vback-porch = <7>;
-				vsync-len = <1>;
-				vfront-porch = <9>;
-				pixelclk-active = <1>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <0>;
-			};
-		};
-	};
-
-	regulators {
-		regulator@2 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_csien>;
-			reg = <2>;
-			regulator-name = "CSI_EN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
-			regulator-always-on;
-		};
-	};
-
-	usbphy {
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			vcc-supply = <&reg_5v0>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-		};
-	};
-};
-
-&cspi1 {
-	pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 27 GPIO_ACTIVE_LOW>;
-};
-
-&fb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_imxfb1>;
-	display = <&display0>;
-	lcd-supply = <&reg_5v0>;
-	fsl,dmacr = <0x00020010>;
-	fsl,lscr1 = <0x00120300>;
-	fsl,lpccr = <0x00a903ff>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	camgpio: pca9536@41 {
-		compatible = "nxp,pca9536";
-		reg = <0x41>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&iomuxc {
-	imx27_phycore_rdk {
-		pinctrl_csien: csiengrp {
-			fsl,pins = <
-				MX27_PAD_USB_OC_B__GPIO2_24 0x0
-			>;
-		};
-
-		pinctrl_cspi1cs1: cspi1cs1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
-			>;
-		};
-
-		pinctrl_imxfb1: imxfbgrp {
-			fsl,pins = <
-				MX27_PAD_LD0__LD0 0x0
-				MX27_PAD_LD1__LD1 0x0
-				MX27_PAD_LD2__LD2 0x0
-				MX27_PAD_LD3__LD3 0x0
-				MX27_PAD_LD4__LD4 0x0
-				MX27_PAD_LD5__LD5 0x0
-				MX27_PAD_LD6__LD6 0x0
-				MX27_PAD_LD7__LD7 0x0
-				MX27_PAD_LD8__LD8 0x0
-				MX27_PAD_LD9__LD9 0x0
-				MX27_PAD_LD10__LD10 0x0
-				MX27_PAD_LD11__LD11 0x0
-				MX27_PAD_LD12__LD12 0x0
-				MX27_PAD_LD13__LD13 0x0
-				MX27_PAD_LD14__LD14 0x0
-				MX27_PAD_LD15__LD15 0x0
-				MX27_PAD_LD16__LD16 0x0
-				MX27_PAD_LD17__LD17 0x0
-				MX27_PAD_CLS__CLS 0x0
-				MX27_PAD_CONTRAST__CONTRAST 0x0
-				MX27_PAD_LSCLK__LSCLK 0x0
-				MX27_PAD_OE_ACD__OE_ACD 0x0
-				MX27_PAD_PS__PS 0x0
-				MX27_PAD_REV__REV 0x0
-				MX27_PAD_SPL_SPR__SPL_SPR 0x0
-				MX27_PAD_HSYNC__HSYNC 0x0
-				MX27_PAD_VSYNC__VSYNC 0x0
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			/* Add pullup to DATA line */
-			fsl,pins = <
-				MX27_PAD_I2C_DATA__I2C_DATA	0x1
-				MX27_PAD_I2C_CLK__I2C_CLK	0x0
-			>;
-		};
-
-		pinctrl_owire1: owire1grp {
-			fsl,pins = <
-				MX27_PAD_RTCK__OWIRE 0x0
-			>;
-		};
-
-		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <
-				MX27_PAD_SD2_CLK__SD2_CLK 0x0
-				MX27_PAD_SD2_CMD__SD2_CMD 0x0
-				MX27_PAD_SD2_D0__SD2_D0 0x0
-				MX27_PAD_SD2_D1__SD2_D1 0x0
-				MX27_PAD_SD2_D2__SD2_D2 0x0
-				MX27_PAD_SD2_D3__SD2_D3 0x0
-				MX27_PAD_SSI3_FS__GPIO3_28	0x0 /* WP */
-				MX27_PAD_SSI3_RXDAT__GPIO3_29	0x0 /* CD */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX27_PAD_UART1_TXD__UART1_TXD 0x0
-				MX27_PAD_UART1_RXD__UART1_RXD 0x0
-				MX27_PAD_UART1_CTS__UART1_CTS 0x0
-				MX27_PAD_UART1_RTS__UART1_RTS 0x0
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX27_PAD_UART2_TXD__UART2_TXD 0x0
-				MX27_PAD_UART2_RXD__UART2_RXD 0x0
-				MX27_PAD_UART2_CTS__UART2_CTS 0x0
-				MX27_PAD_UART2_RTS__UART2_RTS 0x0
-			>;
-		};
-
-		pinctrl_usbh2: usbh2grp {
-			fsl,pins = <
-				MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
-				MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
-				MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
-				MX27_PAD_USBH2_STP__USBH2_STP 0x0
-				MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
-				MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
-				MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
-				MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
-				MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
-				MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
-				MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
-				MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
-			>;
-		};
-
-		pinctrl_weim: weimgrp {
-			fsl,pins = <
-				MX27_PAD_CS4_B__CS4_B		0x0 /* CS4 */
-				MX27_PAD_SD1_D1__GPIO5_19	0x0 /* CAN IRQ */
-			>;
-		};
-	};
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire1>;
-	status = "okay";
-};
-
-&pmicleds {
-	ledr1: led@3 {
-		reg = <3>;
-		label = "system:red1:user";
-	};
-
-	ledg1: led@4 {
-		reg = <4>;
-		label = "system:green1:user";
-	};
-
-	ledb1: led@5 {
-		reg = <5>;
-		label = "system:blue1:user";
-	};
-
-	ledr2: led@6 {
-		reg = <6>;
-		label = "system:red2:user";
-	};
-
-	ledg2: led@7 {
-		reg = <7>;
-		label = "system:green2:user";
-	};
-
-	ledb2: led@8 {
-		reg = <8>;
-		label = "system:blue2:user";
-	};
-
-	ledr3: led@9 {
-		reg = <9>;
-		label = "system:red3:nand";
-		linux,default-trigger = "nand-disk";
-	};
-
-	ledg3: led@10 {
-		reg = <10>;
-		label = "system:green3:live";
-		linux,default-trigger = "heartbeat";
-	};
-
-	ledb3: led@11 {
-		reg = <11>;
-		label = "system:blue3:cpu";
-		linux,default-trigger = "cpu0";
-	};
-};
-
-&sdhci2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdhc2>;
-	bus-width = <4>;
-	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&vmmc1_reg>;
-	status = "okay";
-};
-
-&uart1 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	fsl,uart-has-rtscts;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh2>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	vbus-supply = <&reg_5v0>;
-	fsl,usbphy = <&usbphy2>;
-	disable-over-current;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-
-	can@4,0 {
-		compatible = "nxp,sja1000";
-		reg = <4 0x00000000 0x00000100>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
-		nxp,external-clock-frequency = <16000000>;
-		nxp,tx-output-config = <0x16>;
-		nxp,no-comparator-bypass;
-		fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
-	};
-};
diff --git a/src/arm/imx27-phytec-phycore-som.dts b/src/arm/imx27-phytec-phycore-som.dts
deleted file mode 100644
index 4ec402c38945..000000000000
--- a/src/arm/imx27-phytec-phycore-som.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pcm038";
-	compatible = "phytec,imx27-pcm038", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>;
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <0xcb205000>;
-	};
-
-	pins4 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <0x00001000>;
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 0>;
-	status = "okay";
-
-	pmic: mc13783@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mc13783";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <23 0x4>;
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		regulators {
-			/* SW1A and SW1B joined operation */
-			sw1_reg: sw1a {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1520000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* SW2A and SW2B joined operation */
-			sw2_reg: sw2a {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			violo_reg: violo {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			viohi_reg: viohi {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen_reg: vgen {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vrf1_reg: vrf1 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vrf2_reg: vrf2 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vmmc1_reg: vmmc1 {
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			gpo1_reg: gpo1 { };
-
-			pwgt1spi_reg: pwgt1spi {
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-reset-gpios = <&gpio3 30 0>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	lm75@4a {
-		compatible = "national,lm75";
-		reg = <0x4a>;
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor: nor@c0000000 {
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x02000000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	sram: sram@c8000000 {
-		compatible = "mtd-ram";
-		reg = <1 0x00000000 0x00800000>;
-		bank-width = <2>;
-		linux,mtd-name = "mtd-ram.0";
-		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/src/arm/imx27-phytec-phycore-som.dtsi b/src/arm/imx27-phytec-phycore-som.dtsi
deleted file mode 100644
index b4e955e3be8d..000000000000
--- a/src/arm/imx27-phytec-phycore-som.dtsi
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pcm038";
-	compatible = "phytec,imx27-pcm038", "fsl,imx27";
-
-	memory {
-		reg = <0xa0000000 0x08000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_5v0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			vcc-supply = <&sw3_reg>;
-			clocks = <&clks IMX27_CLK_DUMMY>;
-			clock-names = "main_clk";
-		};
-	};
-};
-
-&audmux {
-	status = "okay";
-
-	/* SSI0 <=> PINS_4 (MC13783 Audio) */
-	ssi0 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <0xcb205000>;
-	};
-
-	pins4 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <0x00001000>;
-	};
-};
-
-&cspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi1>;
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13783@0 {
-		compatible = "fsl,mc13783";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		reg = <0>;
-		spi-cs-high;
-		spi-max-frequency = <20000000>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		pmicleds: leds {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			led-control = <0x001 0x000 0x000 0x000 0x000 0x000>;
-		};
-
-		regulators {
-			/* SW1A and SW1B joined operation */
-			sw1_reg: sw1a {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1520000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			/* SW2A and SW2B joined operation */
-			sw2_reg: sw2a {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			violo_reg: violo {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			viohi_reg: viohi {
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vgen_reg: vgen {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			vrf1_reg: vrf1 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vrf2_reg: vrf2 {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			vmmc1_reg: vmmc1 {
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			gpo1_reg: gpo1 { };
-
-			pwgt1spi_reg: pwgt1spi {
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&fec {
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
-	phy-supply = <&reg_3v3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	lm75@4a {
-		compatible = "national,lm75";
-		reg = <0x4a>;
-	};
-};
-
-&iomuxc {
-	imx27_phycore_som {
-		pinctrl_cspi1: cspi1grp {
-			fsl,pins = <
-				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
-				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
-				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
-				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* SPI1 CS0 */
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-				MX27_PAD_SSI3_TXDAT__GPIO3_30	0x0 /* FEC RST */
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB 0x0
-				MX27_PAD_NFCLE__NFCLE 0x0
-				MX27_PAD_NFWP_B__NFWP_B 0x0
-				MX27_PAD_NFCE_B__NFCE_B 0x0
-				MX27_PAD_NFALE__NFALE 0x0
-				MX27_PAD_NFRE_B__NFRE_B 0x0
-				MX27_PAD_NFWE_B__NFWE_B 0x0
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX27_PAD_USB_PWR__GPIO2_23	0x0 /* PMIC IRQ */
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX27_PAD_SSI1_FS__SSI1_FS 0x0
-				MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
-				MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
-				MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
-				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
-				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
-				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
-				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
-				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
-				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
-				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
-				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
-				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
-				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
-				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&ssi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	phy_type = "ulpi";
-	fsl,usbphy = <&usbphy0>;
-	vbus-supply = <&sw3_reg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	nor: nor@0,0 {
-		compatible = "cfi-flash";
-		reg = <0 0x00000000 0x02000000>;
-		bank-width = <2>;
-		linux,mtd-name = "physmap-flash.0";
-		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	sram: sram@1,0 {
-		compatible = "mtd-ram";
-		reg = <1 0x00000000 0x00800000>;
-		bank-width = <2>;
-		linux,mtd-name = "mtd-ram.0";
-		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/src/arm/imx27-pinfunc.h b/src/arm/imx27-pinfunc.h
deleted file mode 100644
index 597bb5f74dcc..000000000000
--- a/src/arm/imx27-pinfunc.h
+++ /dev/null
@@ -1,480 +0,0 @@
-/*
- * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DTS_IMX27_PINFUNC_H
-#define __DTS_IMX27_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <pin mux_id>
- * mux_id consists of
- * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
- *
- * function:      0 - Primary function
- *                1 - Alternate function
- *                2 - GPIO
- * direction:     0 - Input
- *                1 - Output
- * gpio_oconf:    0 - A_IN
- *                1 - B_IN
- *                2 - C_IN
- *                3 - Data Register
- * gpio_iconfa/b: 0 - GPIO_IN
- *                1 - Interrupt Status Register
- *                2 - 0
- *                3 - 1
- *
- * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- * number on the specific port (between 0 and 31).
- */
-
-#define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
-#define MX27_PAD_USBH2_CLK__GPIO1_0                        0x00 0x032
-#define MX27_PAD_USBH2_DIR__USBH2_DIR                      0x01 0x000
-#define MX27_PAD_USBH2_DIR__GPIO1_1                        0x01 0x032
-#define MX27_PAD_USBH2_DATA7__USBH2_DATA7                  0x02 0x004
-#define MX27_PAD_USBH2_DATA7__GPIO1_2                      0x02 0x032
-#define MX27_PAD_USBH2_NXT__USBH2_NXT                      0x03 0x000
-#define MX27_PAD_USBH2_NXT__GPIO1_3                        0x03 0x032
-#define MX27_PAD_USBH2_STP__USBH2_STP                      0x04 0x004
-#define MX27_PAD_USBH2_STP__GPIO1_4                        0x04 0x032
-#define MX27_PAD_LSCLK__LSCLK                              0x05 0x004
-#define MX27_PAD_LSCLK__GPIO1_5                            0x05 0x032
-#define MX27_PAD_LD0__LD0                                  0x06 0x004
-#define MX27_PAD_LD0__GPIO1_6                              0x06 0x032
-#define MX27_PAD_LD1__LD1                                  0x07 0x004
-#define MX27_PAD_LD1__GPIO1_7                              0x07 0x032
-#define MX27_PAD_LD2__LD2                                  0x08 0x004
-#define MX27_PAD_LD2__GPIO1_8                              0x08 0x032
-#define MX27_PAD_LD3__LD3                                  0x09 0x004
-#define MX27_PAD_LD3__GPIO1_9                              0x09 0x032
-#define MX27_PAD_LD4__LD4                                  0x0a 0x004
-#define MX27_PAD_LD4__GPIO1_10                             0x0a 0x032
-#define MX27_PAD_LD5__LD5                                  0x0b 0x004
-#define MX27_PAD_LD5__GPIO1_11                             0x0b 0x032
-#define MX27_PAD_LD6__LD6                                  0x0c 0x004
-#define MX27_PAD_LD6__GPIO1_12                             0x0c 0x032
-#define MX27_PAD_LD7__LD7                                  0x0d 0x004
-#define MX27_PAD_LD7__GPIO1_13                             0x0d 0x032
-#define MX27_PAD_LD8__LD8                                  0x0e 0x004
-#define MX27_PAD_LD8__GPIO1_14                             0x0e 0x032
-#define MX27_PAD_LD9__LD9                                  0x0f 0x004
-#define MX27_PAD_LD9__GPIO1_15                             0x0f 0x032
-#define MX27_PAD_LD10__LD10                                0x10 0x004
-#define MX27_PAD_LD10__GPIO1_16                            0x10 0x032
-#define MX27_PAD_LD11__LD11                                0x11 0x004
-#define MX27_PAD_LD11__GPIO1_17                            0x11 0x032
-#define MX27_PAD_LD12__LD12                                0x12 0x004
-#define MX27_PAD_LD12__GPIO1_18                            0x12 0x032
-#define MX27_PAD_LD13__LD13                                0x13 0x004
-#define MX27_PAD_LD13__GPIO1_19                            0x13 0x032
-#define MX27_PAD_LD14__LD14                                0x14 0x004
-#define MX27_PAD_LD14__GPIO1_20                            0x14 0x032
-#define MX27_PAD_LD15__LD15                                0x15 0x004
-#define MX27_PAD_LD15__GPIO1_21                            0x15 0x032
-#define MX27_PAD_LD16__LD16                                0x16 0x004
-#define MX27_PAD_LD16__GPIO1_22                            0x16 0x032
-#define MX27_PAD_LD17__LD17                                0x17 0x004
-#define MX27_PAD_LD17__GPIO1_23                            0x17 0x032
-#define MX27_PAD_REV__REV                                  0x18 0x004
-#define MX27_PAD_REV__GPIO1_24                             0x18 0x032
-#define MX27_PAD_CLS__CLS                                  0x19 0x004
-#define MX27_PAD_CLS__GPIO1_25                             0x19 0x032
-#define MX27_PAD_PS__PS                                    0x1a 0x004
-#define MX27_PAD_PS__GPIO1_26                              0x1a 0x032
-#define MX27_PAD_SPL_SPR__SPL_SPR                          0x1b 0x004
-#define MX27_PAD_SPL_SPR__GPIO1_27                         0x1b 0x032
-#define MX27_PAD_HSYNC__HSYNC                              0x1c 0x004
-#define MX27_PAD_HSYNC__GPIO1_28                           0x1c 0x032
-#define MX27_PAD_VSYNC__VSYNC                              0x1d 0x004
-#define MX27_PAD_VSYNC__GPIO1_29                           0x1d 0x032
-#define MX27_PAD_CONTRAST__CONTRAST                        0x1e 0x004
-#define MX27_PAD_CONTRAST__GPIO1_30                        0x1e 0x032
-#define MX27_PAD_OE_ACD__OE_ACD                            0x1f 0x004
-#define MX27_PAD_OE_ACD__GPIO1_31                          0x1f 0x032
-#define MX27_PAD_SD2_D0__SD2_D0                            0x24 0x004
-#define MX27_PAD_SD2_D0__MSHC_DATA0                        0x24 0x005
-#define MX27_PAD_SD2_D0__GPIO2_4                           0x24 0x032
-#define MX27_PAD_SD2_D1__SD2_D1                            0x25 0x004
-#define MX27_PAD_SD2_D1__MSHC_DATA1                        0x25 0x005
-#define MX27_PAD_SD2_D1__GPIO2_5                           0x25 0x032
-#define MX27_PAD_SD2_D2__SD2_D2                            0x26 0x004
-#define MX27_PAD_SD2_D2__MSHC_DATA2                        0x26 0x005
-#define MX27_PAD_SD2_D2__GPIO2_6                           0x26 0x032
-#define MX27_PAD_SD2_D3__SD2_D3                            0x27 0x004
-#define MX27_PAD_SD2_D3__MSHC_DATA3                        0x27 0x005
-#define MX27_PAD_SD2_D3__GPIO2_7                           0x27 0x032
-#define MX27_PAD_SD2_CMD__SD2_CMD                          0x28 0x004
-#define MX27_PAD_SD2_CMD__MSHC_BS                          0x28 0x005
-#define MX27_PAD_SD2_CMD__GPIO2_8                          0x28 0x032
-#define MX27_PAD_SD2_CLK__SD2_CLK                          0x29 0x004
-#define MX27_PAD_SD2_CLK__MSHC_SCLK                        0x29 0x005
-#define MX27_PAD_SD2_CLK__GPIO2_9                          0x29 0x032
-#define MX27_PAD_CSI_D0__CSI_D0                            0x2a 0x000
-#define MX27_PAD_CSI_D0__UART6_TXD                         0x2a 0x005
-#define MX27_PAD_CSI_D0__GPIO2_10                          0x2a 0x032
-#define MX27_PAD_CSI_D1__CSI_D1                            0x2b 0x000
-#define MX27_PAD_CSI_D1__UART6_RXD                         0x2b 0x001
-#define MX27_PAD_CSI_D1__GPIO2_11                          0x2b 0x032
-#define MX27_PAD_CSI_D2__CSI_D2                            0x2c 0x000
-#define MX27_PAD_CSI_D2__UART6_CTS                         0x2c 0x005
-#define MX27_PAD_CSI_D2__GPIO2_12                          0x2c 0x032
-#define MX27_PAD_CSI_D3__CSI_D3                            0x2d 0x000
-#define MX27_PAD_CSI_D3__UART6_RTS                         0x2d 0x001
-#define MX27_PAD_CSI_D3__GPIO2_13                          0x2d 0x032
-#define MX27_PAD_CSI_D4__CSI_D4                            0x2e 0x000
-#define MX27_PAD_CSI_D4__GPIO2_14                          0x2e 0x032
-#define MX27_PAD_CSI_MCLK__CSI_MCLK                        0x2f 0x004
-#define MX27_PAD_CSI_MCLK__GPIO2_15                        0x2f 0x032
-#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK                    0x30 0x000
-#define MX27_PAD_CSI_PIXCLK__GPIO2_16                      0x30 0x032
-#define MX27_PAD_CSI_D5__CSI_D5                            0x31 0x000
-#define MX27_PAD_CSI_D5__GPIO2_17                          0x31 0x032
-#define MX27_PAD_CSI_D6__CSI_D6                            0x32 0x000
-#define MX27_PAD_CSI_D6__UART5_TXD                         0x32 0x005
-#define MX27_PAD_CSI_D6__GPIO2_18                          0x32 0x032
-#define MX27_PAD_CSI_D7__CSI_D7                            0x33 0x000
-#define MX27_PAD_CSI_D7__UART5_RXD                         0x33 0x001
-#define MX27_PAD_CSI_D7__GPIO2_19                          0x33 0x032
-#define MX27_PAD_CSI_VSYNC__CSI_VSYNC                      0x34 0x000
-#define MX27_PAD_CSI_VSYNC__UART5_CTS                      0x34 0x005
-#define MX27_PAD_CSI_VSYNC__GPIO2_20                       0x34 0x032
-#define MX27_PAD_CSI_HSYNC__CSI_HSYNC                      0x35 0x000
-#define MX27_PAD_CSI_HSYNC__UART5_RTS                      0x35 0x001
-#define MX27_PAD_CSI_HSYNC__GPIO2_21                       0x35 0x032
-#define MX27_PAD_USBH1_SUSP__USBH1_SUSP                    0x36 0x004
-#define MX27_PAD_USBH1_SUSP__GPIO2_22                      0x36 0x032
-#define MX27_PAD_USB_PWR__USB_PWR                          0x37 0x004
-#define MX27_PAD_USB_PWR__GPIO2_23                         0x37 0x032
-#define MX27_PAD_USB_OC_B__USB_OC_B                        0x38 0x000
-#define MX27_PAD_USB_OC_B__GPIO2_24                        0x38 0x032
-#define MX27_PAD_USBH1_RCV__USBH1_RCV                      0x39 0x004
-#define MX27_PAD_USBH1_RCV__GPIO2_25                       0x39 0x032
-#define MX27_PAD_USBH1_FS__USBH1_FS                        0x3a 0x004
-#define MX27_PAD_USBH1_FS__UART4_RTS                       0x3a 0x001
-#define MX27_PAD_USBH1_FS__GPIO2_26                        0x3a 0x032
-#define MX27_PAD_USBH1_OE_B__USBH1_OE_B                    0x3b 0x004
-#define MX27_PAD_USBH1_OE_B__GPIO2_27                      0x3b 0x032
-#define MX27_PAD_USBH1_TXDM__USBH1_TXDM                    0x3c 0x004
-#define MX27_PAD_USBH1_TXDM__UART4_TXD                     0x3c 0x005
-#define MX27_PAD_USBH1_TXDM__GPIO2_28                      0x3c 0x032
-#define MX27_PAD_USBH1_TXDP__USBH1_TXDP                    0x3d 0x004
-#define MX27_PAD_USBH1_TXDP__UART4_CTS                     0x3d 0x005
-#define MX27_PAD_USBH1_TXDP__GPIO2_29                      0x3d 0x032
-#define MX27_PAD_USBH1_RXDM__USBH1_RXDM                    0x3e 0x004
-#define MX27_PAD_USBH1_RXDM__GPIO2_30                      0x3e 0x032
-#define MX27_PAD_USBH1_RXDP__USBH1_RXDP                    0x3f 0x004
-#define MX27_PAD_USBH1_RXDP__UART4_RXD                     0x3f 0x001
-#define MX27_PAD_USBH1_RXDP__GPIO2_31                      0x3f 0x032
-#define MX27_PAD_I2C2_SDA__I2C2_SDA                        0x45 0x004
-#define MX27_PAD_I2C2_SDA__GPIO3_5                         0x45 0x032
-#define MX27_PAD_I2C2_SCL__I2C2_SCL                        0x46 0x004
-#define MX27_PAD_I2C2_SCL__GPIO3_6                         0x46 0x032
-#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5                0x47 0x004
-#define MX27_PAD_USBOTG_DATA5__GPIO3_7                     0x47 0x032
-#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6                0x48 0x004
-#define MX27_PAD_USBOTG_DATA6__GPIO3_8                     0x48 0x032
-#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0                0x49 0x004
-#define MX27_PAD_USBOTG_DATA0__GPIO3_9                     0x49 0x032
-#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2                0x4a 0x004
-#define MX27_PAD_USBOTG_DATA2__GPIO3_10                    0x4a 0x032
-#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1                0x4b 0x004
-#define MX27_PAD_USBOTG_DATA1__GPIO3_11                    0x4b 0x032
-#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4                0x4c 0x004
-#define MX27_PAD_USBOTG_DATA4__GPIO3_12                    0x4c 0x032
-#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3                0x4d 0x004
-#define MX27_PAD_USBOTG_DATA3__GPIO3_13                    0x4d 0x032
-#define MX27_PAD_TOUT__TOUT                                0x4e 0x004
-#define MX27_PAD_TOUT__GPIO3_14                            0x4e 0x032
-#define MX27_PAD_TIN__TIN                                  0x4f 0x000
-#define MX27_PAD_TIN__GPIO3_15                             0x4f 0x032
-#define MX27_PAD_SSI4_FS__SSI4_FS                          0x50 0x004
-#define MX27_PAD_SSI4_FS__GPIO3_16                         0x50 0x032
-#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT                    0x51 0x004
-#define MX27_PAD_SSI4_RXDAT__GPIO3_17                      0x51 0x032
-#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT                    0x52 0x004
-#define MX27_PAD_SSI4_TXDAT__GPIO3_18                      0x52 0x032
-#define MX27_PAD_SSI4_CLK__SSI4_CLK                        0x53 0x004
-#define MX27_PAD_SSI4_CLK__GPIO3_19                        0x53 0x032
-#define MX27_PAD_SSI1_FS__SSI1_FS                          0x54 0x004
-#define MX27_PAD_SSI1_FS__GPIO3_20                         0x54 0x032
-#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT                    0x55 0x004
-#define MX27_PAD_SSI1_RXDAT__GPIO3_21                      0x55 0x032
-#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT                    0x56 0x004
-#define MX27_PAD_SSI1_TXDAT__GPIO3_22                      0x56 0x032
-#define MX27_PAD_SSI1_CLK__SSI1_CLK                        0x57 0x004
-#define MX27_PAD_SSI1_CLK__GPIO3_23                        0x57 0x032
-#define MX27_PAD_SSI2_FS__SSI2_FS                          0x58 0x004
-#define MX27_PAD_SSI2_FS__GPT5_TOUT                        0x58 0x005
-#define MX27_PAD_SSI2_FS__GPIO3_24                         0x58 0x032
-#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT                    0x59 0x004
-#define MX27_PAD_SSI2_RXDAT__GPTS_TIN                      0x59 0x001
-#define MX27_PAD_SSI2_RXDAT__GPIO3_25                      0x59 0x032
-#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT                    0x5a 0x004
-#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT                     0x5a 0x005
-#define MX27_PAD_SSI2_TXDAT__GPIO3_26                      0x5a 0x032
-#define MX27_PAD_SSI2_CLK__SSI2_CLK                        0x5b 0x004
-#define MX27_PAD_SSI2_CLK__GPT4_TIN                        0x5b 0x001
-#define MX27_PAD_SSI2_CLK__GPIO3_27                        0x5b 0x032
-#define MX27_PAD_SSI3_FS__SSI3_FS                          0x5c 0x004
-#define MX27_PAD_SSI3_FS__SLCDC2_D0                        0x5c 0x001
-#define MX27_PAD_SSI3_FS__GPIO3_28                         0x5c 0x032
-#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT                    0x5d 0x004
-#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS                     0x5d 0x001
-#define MX27_PAD_SSI3_RXDAT__GPIO3_29                      0x5d 0x032
-#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT                    0x5e 0x004
-#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS                     0x5e 0x001
-#define MX27_PAD_SSI3_TXDAT__GPIO3_30                      0x5e 0x032
-#define MX27_PAD_SSI3_CLK__SSI3_CLK                        0x5f 0x004
-#define MX27_PAD_SSI3_CLK__SLCDC2_CLK                      0x5f 0x001
-#define MX27_PAD_SSI3_CLK__GPIO3_31                        0x5f 0x032
-#define MX27_PAD_SD3_CMD__SD3_CMD                          0x60 0x004
-#define MX27_PAD_SD3_CMD__FEC_TXD0                         0x60 0x006
-#define MX27_PAD_SD3_CMD__GPIO4_0                          0x60 0x032
-#define MX27_PAD_SD3_CLK__SD3_CLK                          0x61 0x004
-#define MX27_PAD_SD3_CLK__ETMTRACEPKT15                    0x61 0x005
-#define MX27_PAD_SD3_CLK__FEC_TXD1                         0x61 0x006
-#define MX27_PAD_SD3_CLK__GPIO4_1                          0x61 0x032
-#define MX27_PAD_ATA_DATA0__ATA_DATA0                      0x62 0x004
-#define MX27_PAD_ATA_DATA0__SD3_D0                         0x62 0x005
-#define MX27_PAD_ATA_DATA0__FEC_TXD2                       0x62 0x006
-#define MX27_PAD_ATA_DATA0__GPIO4_2                        0x62 0x032
-#define MX27_PAD_ATA_DATA1__ATA_DATA1                      0x63 0x004
-#define MX27_PAD_ATA_DATA1__SD3_D1                         0x63 0x005
-#define MX27_PAD_ATA_DATA1__FEC_TXD3                       0x63 0x006
-#define MX27_PAD_ATA_DATA1__GPIO4_3                        0x63 0x032
-#define MX27_PAD_ATA_DATA2__ATA_DATA2                      0x64 0x004
-#define MX27_PAD_ATA_DATA2__SD3_D2                         0x64 0x005
-#define MX27_PAD_ATA_DATA2__FEC_RX_ER                      0x64 0x002
-#define MX27_PAD_ATA_DATA2__GPIO4_4                        0x64 0x032
-#define MX27_PAD_ATA_DATA3__ATA_DATA3                      0x65 0x004
-#define MX27_PAD_ATA_DATA3__SD3_D3                         0x65 0x005
-#define MX27_PAD_ATA_DATA3__FEC_RXD1                       0x65 0x002
-#define MX27_PAD_ATA_DATA3__GPIO4_5                        0x65 0x032
-#define MX27_PAD_ATA_DATA4__ATA_DATA4                      0x66 0x004
-#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14                  0x66 0x005
-#define MX27_PAD_ATA_DATA4__FEC_RXD2                       0x66 0x002
-#define MX27_PAD_ATA_DATA4__GPIO4_6                        0x66 0x032
-#define MX27_PAD_ATA_DATA5__ATA_DATA5                      0x67 0x004
-#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13                  0x67 0x005
-#define MX27_PAD_ATA_DATA5__FEC_RXD3                       0x67 0x002
-#define MX27_PAD_ATA_DATA5__GPIO4_7                        0x67 0x032
-#define MX27_PAD_ATA_DATA6__ATA_DATA6                      0x68 0x004
-#define MX27_PAD_ATA_DATA6__FEC_MDIO                       0x68 0x005
-#define MX27_PAD_ATA_DATA6__GPIO4_8                        0x68 0x032
-#define MX27_PAD_ATA_DATA7__ATA_DATA7                      0x69 0x004
-#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12                  0x69 0x005
-#define MX27_PAD_ATA_DATA7__FEC_MDC                        0x69 0x006
-#define MX27_PAD_ATA_DATA7__GPIO4_9                        0x69 0x032
-#define MX27_PAD_ATA_DATA8__ATA_DATA8                      0x6a 0x004
-#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11                  0x6a 0x005
-#define MX27_PAD_ATA_DATA8__FEC_CRS                        0x6a 0x002
-#define MX27_PAD_ATA_DATA8__GPIO4_10                       0x6a 0x032
-#define MX27_PAD_ATA_DATA9__ATA_DATA9                      0x6b 0x004
-#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10                  0x6b 0x005
-#define MX27_PAD_ATA_DATA9__FEC_TX_CLK                     0x6b 0x002
-#define MX27_PAD_ATA_DATA9__GPIO4_11                       0x6b 0x032
-#define MX27_PAD_ATA_DATA10__ATA_DATA10                    0x6c 0x004
-#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9                  0x6c 0x005
-#define MX27_PAD_ATA_DATA10__FEC_RXD0                      0x6c 0x002
-#define MX27_PAD_ATA_DATA10__GPIO4_12                      0x6c 0x032
-#define MX27_PAD_ATA_DATA11__ATA_DATA11                    0x6d 0x004
-#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8                  0x6d 0x005
-#define MX27_PAD_ATA_DATA11__FEC_RX_DV                     0x6d 0x002
-#define MX27_PAD_ATA_DATA11__GPIO4_13                      0x6d 0x032
-#define MX27_PAD_ATA_DATA12__ATA_DATA12                    0x6e 0x004
-#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7                  0x6e 0x005
-#define MX27_PAD_ATA_DATA12__FEC_RX_CLK                    0x6e 0x002
-#define MX27_PAD_ATA_DATA12__GPIO4_14                      0x6e 0x032
-#define MX27_PAD_ATA_DATA13__ATA_DATA13                    0x6f 0x004
-#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6                  0x6f 0x005
-#define MX27_PAD_ATA_DATA13__FEC_COL                       0x6f 0x002
-#define MX27_PAD_ATA_DATA13__GPIO4_15                      0x6f 0x032
-#define MX27_PAD_ATA_DATA14__ATA_DATA14                    0x70 0x004
-#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5                  0x70 0x005
-#define MX27_PAD_ATA_DATA14__FEC_TX_ER                     0x70 0x006
-#define MX27_PAD_ATA_DATA14__GPIO4_16                      0x70 0x032
-#define MX27_PAD_I2C_DATA__I2C_DATA                        0x71 0x004
-#define MX27_PAD_I2C_DATA__GPIO4_17                        0x71 0x032
-#define MX27_PAD_I2C_CLK__I2C_CLK                          0x72 0x004
-#define MX27_PAD_I2C_CLK__GPIO4_18                         0x72 0x032
-#define MX27_PAD_CSPI2_SS2__CSPI2_SS2                      0x73 0x004
-#define MX27_PAD_CSPI2_SS2__USBH2_DATA4                    0x73 0x005
-#define MX27_PAD_CSPI2_SS2__GPIO4_19                       0x73 0x032
-#define MX27_PAD_CSPI2_SS1__CSPI2_SS1                      0x74 0x004
-#define MX27_PAD_CSPI2_SS1__USBH2_DATA3                    0x74 0x005
-#define MX27_PAD_CSPI2_SS1__GPIO4_20                       0x74 0x032
-#define MX27_PAD_CSPI2_SS0__CSPI2_SS0                      0x75 0x004
-#define MX27_PAD_CSPI2_SS0__USBH2_DATA6                    0x75 0x005
-#define MX27_PAD_CSPI2_SS0__GPIO4_21                       0x75 0x032
-#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK                    0x76 0x004
-#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0                   0x76 0x005
-#define MX27_PAD_CSPI2_SCLK__GPIO4_22                      0x76 0x032
-#define MX27_PAD_CSPI2_MISO__CSPI2_MISO                    0x77 0x004
-#define MX27_PAD_CSPI2_MISO__USBH2_DATA2                   0x77 0x005
-#define MX27_PAD_CSPI2_MISO__GPIO4_23                      0x77 0x032
-#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI                    0x78 0x004
-#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1                   0x78 0x005
-#define MX27_PAD_CSPI2_MOSI__GPIO4_24                      0x78 0x032
-#define MX27_PAD_CSPI1_RDY__CSPI1_RDY                      0x79 0x000
-#define MX27_PAD_CSPI1_RDY__GPIO4_25                       0x79 0x032
-#define MX27_PAD_CSPI1_SS2__CSPI1_SS2                      0x7a 0x004
-#define MX27_PAD_CSPI1_SS2__USBH2_DATA5                    0x7a 0x005
-#define MX27_PAD_CSPI1_SS2__GPIO4_26                       0x7a 0x032
-#define MX27_PAD_CSPI1_SS1__CSPI1_SS1                      0x7b 0x004
-#define MX27_PAD_CSPI1_SS1__GPIO4_27                       0x7b 0x032
-#define MX27_PAD_CSPI1_SS0__CSPI1_SS0                      0x7c 0x004
-#define MX27_PAD_CSPI1_SS0__GPIO4_28                       0x7c 0x032
-#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK                    0x7d 0x004
-#define MX27_PAD_CSPI1_SCLK__GPIO4_29                      0x7d 0x032
-#define MX27_PAD_CSPI1_MISO__CSPI1_MISO                    0x7e 0x004
-#define MX27_PAD_CSPI1_MISO__GPIO4_30                      0x7e 0x032
-#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI                    0x7f 0x004
-#define MX27_PAD_CSPI1_MOSI__GPIO4_31                      0x7f 0x032
-#define MX27_PAD_USBOTG_NXT__USBOTG_NXT                    0x80 0x000
-#define MX27_PAD_USBOTG_NXT__KP_COL6A                      0x80 0x005
-#define MX27_PAD_USBOTG_NXT__GPIO5_0                       0x80 0x032
-#define MX27_PAD_USBOTG_STP__USBOTG_STP                    0x81 0x004
-#define MX27_PAD_USBOTG_STP__KP_ROW6A                      0x81 0x005
-#define MX27_PAD_USBOTG_STP__GPIO5_1                       0x81 0x032
-#define MX27_PAD_USBOTG_DIR__USBOTG_DIR                    0x82 0x000
-#define MX27_PAD_USBOTG_DIR__KP_ROW7A                      0x82 0x005
-#define MX27_PAD_USBOTG_DIR__GPIO5_2                       0x82 0x032
-#define MX27_PAD_UART2_CTS__UART2_CTS                      0x83 0x004
-#define MX27_PAD_UART2_CTS__KP_COL7                        0x83 0x005
-#define MX27_PAD_UART2_CTS__GPIO5_3                        0x83 0x032
-#define MX27_PAD_UART2_RTS__UART2_RTS                      0x84 0x000
-#define MX27_PAD_UART2_RTS__KP_ROW7                        0x84 0x005
-#define MX27_PAD_UART2_RTS__GPIO5_4                        0x84 0x032
-#define MX27_PAD_PWMO__PWMO                                0x85 0x004
-#define MX27_PAD_PWMO__GPIO5_5                             0x85 0x032
-#define MX27_PAD_UART2_TXD__UART2_TXD                      0x86 0x004
-#define MX27_PAD_UART2_TXD__KP_COL6                        0x86 0x005
-#define MX27_PAD_UART2_TXD__GPIO5_6                        0x86 0x032
-#define MX27_PAD_UART2_RXD__UART2_RXD                      0x87 0x000
-#define MX27_PAD_UART2_RXD__KP_ROW6                        0x87 0x005
-#define MX27_PAD_UART2_RXD__GPIO5_7                        0x87 0x032
-#define MX27_PAD_UART3_TXD__UART3_TXD                      0x88 0x004
-#define MX27_PAD_UART3_TXD__GPIO5_8                        0x88 0x032
-#define MX27_PAD_UART3_RXD__UART3_RXD                      0x89 0x000
-#define MX27_PAD_UART3_RXD__GPIO5_9                        0x89 0x032
-#define MX27_PAD_UART3_CTS__UART3_CTS                      0x8a 0x004
-#define MX27_PAD_UART3_CTS__GPIO5_10                       0x8a 0x032
-#define MX27_PAD_UART3_RTS__UART3_RTS                      0x8b 0x000
-#define MX27_PAD_UART3_RTS__GPIO5_11                       0x8b 0x032
-#define MX27_PAD_UART1_TXD__UART1_TXD                      0x8c 0x004
-#define MX27_PAD_UART1_TXD__GPIO5_12                       0x8c 0x032
-#define MX27_PAD_UART1_RXD__UART1_RXD                      0x8d 0x000
-#define MX27_PAD_UART1_RXD__GPIO5_13                       0x8d 0x032
-#define MX27_PAD_UART1_CTS__UART1_CTS                      0x8e 0x004
-#define MX27_PAD_UART1_CTS__GPIO5_14                       0x8e 0x032
-#define MX27_PAD_UART1_RTS__UART1_RTS                      0x8f 0x000
-#define MX27_PAD_UART1_RTS__GPIO5_15                       0x8f 0x032
-#define MX27_PAD_RTCK__RTCK                                0x90 0x004
-#define MX27_PAD_RTCK__OWIRE                               0x90 0x005
-#define MX27_PAD_RTCK__GPIO5_16                            0x90 0x032
-#define MX27_PAD_RESET_OUT_B__RESET_OUT_B                  0x91 0x004
-#define MX27_PAD_RESET_OUT_B__GPIO5_17                     0x91 0x032
-#define MX27_PAD_SD1_D0__SD1_D0                            0x92 0x004
-#define MX27_PAD_SD1_D0__CSPI3_MISO                        0x92 0x001
-#define MX27_PAD_SD1_D0__GPIO5_18                          0x92 0x032
-#define MX27_PAD_SD1_D1__SD1_D1                            0x93 0x004
-#define MX27_PAD_SD1_D1__GPIO5_19                          0x93 0x032
-#define MX27_PAD_SD1_D2__SD1_D2                            0x94 0x004
-#define MX27_PAD_SD1_D2__GPIO5_20                          0x94 0x032
-#define MX27_PAD_SD1_D3__SD1_D3                            0x95 0x004
-#define MX27_PAD_SD1_D3__CSPI3_SS                          0x95 0x005
-#define MX27_PAD_SD1_D3__GPIO5_21                          0x95 0x032
-#define MX27_PAD_SD1_CMD__SD1_CMD                          0x96 0x004
-#define MX27_PAD_SD1_CMD__CSPI3_MOSI                       0x96 0x005
-#define MX27_PAD_SD1_CMD__GPIO5_22                         0x96 0x032
-#define MX27_PAD_SD1_CLK__SD1_CLK                          0x97 0x004
-#define MX27_PAD_SD1_CLK__CSPI3_SCLK                       0x97 0x005
-#define MX27_PAD_SD1_CLK__GPIO5_23                         0x97 0x032
-#define MX27_PAD_USBOTG_CLK__USBOTG_CLK                    0x98 0x000
-#define MX27_PAD_USBOTG_CLK__GPIO5_24                      0x98 0x032
-#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7                0x99 0x004
-#define MX27_PAD_USBOTG_DATA7__GPIO5_25                    0x99 0x032
-#define MX27_PAD_NFRB__NFRB                                0xa0 0x000
-#define MX27_PAD_NFRB__ETMTRACEPKT3                        0xa0 0x005
-#define MX27_PAD_NFRB__GPIO6_0                             0xa0 0x032
-#define MX27_PAD_NFCLE__NFCLE                              0xa1 0x004
-#define MX27_PAD_NFCLE__ETMTRACEPKT0                       0xa1 0x005
-#define MX27_PAD_NFCLE__GPIO6_1                            0xa1 0x032
-#define MX27_PAD_NFWP_B__NFWP_B                            0xa2 0x004
-#define MX27_PAD_NFWP_B__ETMTRACEPKT1                      0xa2 0x005
-#define MX27_PAD_NFWP_B__GPIO6_2                           0xa2 0x032
-#define MX27_PAD_NFCE_B__NFCE_B                            0xa3 0x004
-#define MX27_PAD_NFCE_B__ETMTRACEPKT2                      0xa3 0x005
-#define MX27_PAD_NFCE_B__GPIO6_3                           0xa3 0x032
-#define MX27_PAD_NFALE__NFALE                              0xa4 0x004
-#define MX27_PAD_NFALE__ETMPIPESTAT0                       0xa4 0x005
-#define MX27_PAD_NFALE__GPIO6_4                            0xa4 0x032
-#define MX27_PAD_NFRE_B__NFRE_B                            0xa5 0x004
-#define MX27_PAD_NFRE_B__ETMPIPESTAT1                      0xa5 0x005
-#define MX27_PAD_NFRE_B__GPIO6_5                           0xa5 0x032
-#define MX27_PAD_NFWE_B__NFWE_B                            0xa6 0x004
-#define MX27_PAD_NFWE_B__ETMPIPESTAT2                      0xa6 0x005
-#define MX27_PAD_NFWE_B__GPIO6_6                           0xa6 0x032
-#define MX27_PAD_PC_POE__PC_POE                            0xa7 0x004
-#define MX27_PAD_PC_POE__ATA_BUFFER_EN                     0xa7 0x005
-#define MX27_PAD_PC_POE__GPIO6_7                           0xa7 0x032
-#define MX27_PAD_PC_RW_B__PC_RW_B                          0xa8 0x004
-#define MX27_PAD_PC_RW_B__ATA_IORDY                        0xa8 0x001
-#define MX27_PAD_PC_RW_B__GPIO6_8                          0xa8 0x032
-#define MX27_PAD_IOIS16__IOIS16                            0xa9 0x000
-#define MX27_PAD_IOIS16__ATA_INTRQ                         0xa9 0x001
-#define MX27_PAD_IOIS16__GPIO6_9                           0xa9 0x032
-#define MX27_PAD_PC_RST__PC_RST                            0xaa 0x004
-#define MX27_PAD_PC_RST__ATA_RESET_B                       0xaa 0x005
-#define MX27_PAD_PC_RST__GPIO6_10                          0xaa 0x032
-#define MX27_PAD_PC_BVD2__PC_BVD2                          0xab 0x000
-#define MX27_PAD_PC_BVD2__ATA_DMACK                        0xab 0x005
-#define MX27_PAD_PC_BVD2__GPIO6_11                         0xab 0x032
-#define MX27_PAD_PC_BVD1__PC_BVD1                          0xac 0x000
-#define MX27_PAD_PC_BVD1__ATA_DMARQ                        0xac 0x001
-#define MX27_PAD_PC_BVD1__GPIO6_12                         0xac 0x032
-#define MX27_PAD_PC_VS2__PC_VS2                            0xad 0x000
-#define MX27_PAD_PC_VS2__ATA_DA0                           0xad 0x005
-#define MX27_PAD_PC_VS2__GPIO6_13                          0xad 0x032
-#define MX27_PAD_PC_VS1__PC_VS1                            0xae 0x000
-#define MX27_PAD_PC_VS1__ATA_DA1                           0xae 0x005
-#define MX27_PAD_PC_VS1__GPIO6_14                          0xae 0x032
-#define MX27_PAD_CLKO__CLKO                                0xaf 0x004
-#define MX27_PAD_CLKO__GPIO6_15                            0xaf 0x032
-#define MX27_PAD_PC_PWRON__PC_PWRON                        0xb0 0x000
-#define MX27_PAD_PC_PWRON__ATA_DA2                         0xb0 0x005
-#define MX27_PAD_PC_PWRON__GPIO6_16                        0xb0 0x032
-#define MX27_PAD_PC_READY__PC_READY                        0xb1 0x000
-#define MX27_PAD_PC_READY__ATA_CS0                         0xb1 0x005
-#define MX27_PAD_PC_READY__GPIO6_17                        0xb1 0x032
-#define MX27_PAD_PC_WAIT_B__PC_WAIT_B                      0xb2 0x000
-#define MX27_PAD_PC_WAIT_B__ATA_CS1                        0xb2 0x005
-#define MX27_PAD_PC_WAIT_B__GPIO6_18                       0xb2 0x032
-#define MX27_PAD_PC_CD2_B__PC_CD2_B                        0xb3 0x000
-#define MX27_PAD_PC_CD2_B__ATA_DIOW                        0xb3 0x005
-#define MX27_PAD_PC_CD2_B__GPIO6_19                        0xb3 0x032
-#define MX27_PAD_PC_CD1_B__PC_CD1_B                        0xb4 0x000
-#define MX27_PAD_PC_CD1_B__ATA_DIOR                        0xb4 0x005
-#define MX27_PAD_PC_CD1_B__GPIO6_20                        0xb4 0x032
-#define MX27_PAD_CS4_B__CS4_B                              0xb5 0x004
-#define MX27_PAD_CS4_B__ETMTRACESYNC                       0xb5 0x005
-#define MX27_PAD_CS4_B__GPIO6_21                           0xb5 0x032
-#define MX27_PAD_CS5_B__CS5_B                              0xb6 0x004
-#define MX27_PAD_CS5_B__ETMTRACECLK                        0xb6 0x005
-#define MX27_PAD_CS5_B__GPIO6_22                           0xb6 0x032
-#define MX27_PAD_ATA_DATA15__ATA_DATA15                    0xb7 0x004
-#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4                  0xb7 0x005
-#define MX27_PAD_ATA_DATA15__FEC_TX_EN                     0xb7 0x006
-#define MX27_PAD_ATA_DATA15__GPIO6_23                      0xb7 0x032
-
-#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/src/arm/imx27.dtsi b/src/arm/imx27.dtsi
deleted file mode 100644
index 107d713e1cbe..000000000000
--- a/src/arm/imx27.dtsi
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-#include "imx27-pinfunc.h"
-
-#include <dt-bindings/clock/imx27-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		spi0 = &cspi1;
-		spi1 = &cspi2;
-		spi2 = &cspi3;
-	};
-
-	aitc: aitc-interrupt-controller@e0000000 {
-		compatible = "fsl,imx27-aitc", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x10040000 0x1000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc26m {
-			compatible = "fsl,imx-osc26m", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-		};
-	};
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			operating-points = <
-				/* kHz uV */
-				266000 1300000
-				399000 1450000
-			>;
-			clock-latency = <62500>;
-			clocks = <&clks IMX27_CLK_CPU_DIV>;
-			voltage-tolerance = <5>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&aitc>;
-		ranges;
-
-		aipi@10000000 { /* AIPI1 */
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10000000 0x20000>;
-			ranges;
-
-			dma: dma@10001000 {
-				compatible = "fsl,imx27-dma";
-				reg = <0x10001000 0x1000>;
-				interrupts = <32>;
-				clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
-					 <&clks IMX27_CLK_DMA_AHB_GATE>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <1>;
-				#dma-channels = <16>;
-			};
-
-			wdog: wdog@10002000 {
-				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
-				reg = <0x10002000 0x1000>;
-				interrupts = <27>;
-				clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
-			};
-
-			gpt1: timer@10003000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10003000 0x1000>;
-				interrupts = <26>;
-				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: timer@10004000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10004000 0x1000>;
-				interrupts = <25>;
-				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt3: timer@10005000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10005000 0x1000>;
-				interrupts = <24>;
-				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm: pwm@10006000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx27-pwm";
-				reg = <0x10006000 0x1000>;
-				interrupts = <23>;
-				clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			kpp: kpp@10008000 {
-				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
-				reg = <0x10008000 0x1000>;
-				interrupts = <21>;
-				clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
-				status = "disabled";
-			};
-
-			owire: owire@10009000 {
-				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
-				reg = <0x10009000 0x1000>;
-				clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
-				status = "disabled";
-			};
-
-			uart1: serial@1000a000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000a000 0x1000>;
-				interrupts = <20>;
-				clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@1000b000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000b000 0x1000>;
-				interrupts = <19>;
-				clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@1000c000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000c000 0x1000>;
-				interrupts = <18>;
-				clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@1000d000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000d000 0x1000>;
-				interrupts = <17>;
-				clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			cspi1: cspi@1000e000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x1000e000 0x1000>;
-				interrupts = <16>;
-				clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			cspi2: cspi@1000f000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x1000f000 0x1000>;
-				interrupts = <15>;
-				clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			ssi1: ssi@10010000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
-				reg = <0x10010000 0x1000>;
-				interrupts = <14>;
-				clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
-				dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
-				dma-names = "rx0", "tx0", "rx1", "tx1";
-				fsl,fifo-depth = <8>;
-				status = "disabled";
-			};
-
-			ssi2: ssi@10011000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
-				reg = <0x10011000 0x1000>;
-				interrupts = <13>;
-				clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
-				dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
-				dma-names = "rx0", "tx0", "rx1", "tx1";
-				fsl,fifo-depth = <8>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@10012000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
-				reg = <0x10012000 0x1000>;
-				interrupts = <12>;
-				clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
-				status = "disabled";
-			};
-
-			sdhci1: sdhci@10013000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x10013000 0x1000>;
-				interrupts = <11>;
-				clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 7>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			sdhci2: sdhci@10014000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x10014000 0x1000>;
-				interrupts = <10>;
-				clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 6>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@10015000 {
-				compatible = "fsl,imx27-iomuxc";
-				reg = <0x10015000 0x600>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				gpio1: gpio@10015000 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015000 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@10015100 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015100 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio3: gpio@10015200 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015200 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio4: gpio@10015300 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015300 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio5: gpio@10015400 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015400 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio6: gpio@10015500 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015500 0x100>;
-					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-			};
-
-			audmux: audmux@10016000 {
-				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
-				reg = <0x10016000 0x1000>;
-				clocks = <&clks IMX27_CLK_DUMMY>;
-				clock-names = "audmux";
-				status = "disabled";
-			};
-
-			cspi3: cspi@10017000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x10017000 0x1000>;
-				interrupts = <6>;
-				clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: timer@10019000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10019000 0x1000>;
-				interrupts = <4>;
-				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt5: timer@1001a000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x1001a000 0x1000>;
-				interrupts = <3>;
-				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			uart5: serial@1001b000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1001b000 0x1000>;
-				interrupts = <49>;
-				clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@1001c000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1001c000 0x1000>;
-				interrupts = <48>;
-				clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@1001d000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
-				reg = <0x1001d000 0x1000>;
-				interrupts = <1>;
-				clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
-				status = "disabled";
-			};
-
-			sdhci3: sdhci@1001e000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x1001e000 0x1000>;
-				interrupts = <9>;
-				clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
-					 <&clks IMX27_CLK_PER2_GATE>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 36>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			gpt6: timer@1001f000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x1001f000 0x1000>;
-				interrupts = <2>;
-				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
-					 <&clks IMX27_CLK_PER1_GATE>;
-				clock-names = "ipg", "per";
-			};
-		};
-
-		aipi@10020000 { /* AIPI2 */
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10020000 0x20000>;
-			ranges;
-
-			fb: fb@10021000 {
-				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
-				interrupts = <61>;
-				reg = <0x10021000 0x1000>;
-				clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
-					 <&clks IMX27_CLK_LCDC_AHB_GATE>,
-					 <&clks IMX27_CLK_PER3_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			coda: coda@10023000 {
-				compatible = "fsl,imx27-vpu";
-				reg = <0x10023000 0x0200>;
-				interrupts = <53>;
-				clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
-					 <&clks IMX27_CLK_VPU_AHB_GATE>;
-				clock-names = "per", "ahb";
-				iram = <&iram>;
-			};
-
-			usbotg: usb@10024000 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024000 0x200>;
-				interrupts = <56>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
-				fsl,usbmisc = <&usbmisc 0>;
-				status = "disabled";
-			};
-
-			usbh1: usb@10024200 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024200 0x200>;
-				interrupts = <54>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
-				fsl,usbmisc = <&usbmisc 1>;
-				status = "disabled";
-			};
-
-			usbh2: usb@10024400 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024400 0x200>;
-				interrupts = <55>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
-				fsl,usbmisc = <&usbmisc 2>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@10024600 {
-				#index-cells = <1>;
-				compatible = "fsl,imx27-usbmisc";
-				reg = <0x10024600 0x200>;
-				clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
-			};
-
-			sahara2: sahara@10025000 {
-				compatible = "fsl,imx27-sahara";
-				reg = <0x10025000 0x1000>;
-				interrupts = <59>;
-				clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
-					 <&clks IMX27_CLK_SAHARA_AHB_GATE>;
-				clock-names = "ipg", "ahb";
-			};
-
-			clks: ccm@10027000{
-				compatible = "fsl,imx27-ccm";
-				reg = <0x10027000 0x1000>;
-				#clock-cells = <1>;
-			};
-
-			iim: iim@10028000 {
-				compatible = "fsl,imx27-iim";
-				reg = <0x10028000 0x1000>;
-				interrupts = <62>;
-				clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
-			};
-
-			fec: ethernet@1002b000 {
-				compatible = "fsl,imx27-fec";
-				reg = <0x1002b000 0x4000>;
-				interrupts = <50>;
-				clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
-					 <&clks IMX27_CLK_FEC_AHB_GATE>;
-				clock-names = "ipg", "ahb";
-				status = "disabled";
-			};
-		};
-
-		nfc: nand@d8000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,imx27-nand";
-			reg = <0xd8000000 0x1000>;
-			interrupts = <29>;
-			clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
-			status = "disabled";
-		};
-
-		weim: weim@d8002000 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "fsl,imx27-weim";
-			reg = <0xd8002000 0x1000>;
-			clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
-			ranges = <
-				0 0 0xc0000000 0x08000000
-				1 0 0xc8000000 0x08000000
-				2 0 0xd0000000 0x02000000
-				3 0 0xd2000000 0x02000000
-				4 0 0xd4000000 0x02000000
-				5 0 0xd6000000 0x02000000
-			>;
-			status = "disabled";
-		};
-
-		iram: iram@ffff4c00 {
-			compatible = "mmio-sram";
-			reg = <0xffff4c00 0xb400>;
-		};
-	};
-};
diff --git a/src/arm/imx28-apf28.dts b/src/arm/imx28-apf28.dts
deleted file mode 100644
index 7198fe3798c6..000000000000
--- a/src/arm/imx28-apf28.dts
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Armadeus Systems APF28 module";
-	compatible = "armadeus,imx28-apf28", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x300000>;
-				};
-
-				partition@300000 {
-					label = "env";
-					reg = <0x300000 0x80000>;
-				};
-
-				partition@380000 {
-					label = "env2";
-					reg = <0x380000 0x80000>;
-				};
-
-				partition@400000 {
-					label = "dtb";
-					reg = <0x400000 0x80000>;
-				};
-
-				partition@480000 {
-					label = "splash";
-					reg = <0x480000 0x80000>;
-				};
-
-				partition@500000 {
-					label = "kernel";
-					reg = <0x500000 0x800000>;
-				};
-
-				partition@d00000 {
-					label = "rootfs";
-					reg = <0xd00000 0xf300000>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 0>;
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/imx28-apf28dev.dts b/src/arm/imx28-apf28dev.dts
deleted file mode 100644
index 221cac4fb2cd..000000000000
--- a/src/arm/imx28-apf28dev.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/* APF28Dev is a docking board for the APF28 SOM */
-#include "imx28-apf28.dts"
-
-/ {
-	model = "Armadeus Systems APF28Dev docking/development board";
-	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_apf28dev>;
-
-				hog_pins_apf28dev: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D16__GPIO_1_16
-						MX28_PAD_LCD_D17__GPIO_1_17
-						MX28_PAD_LCD_D18__GPIO_1_18
-						MX28_PAD_LCD_D19__GPIO_1_19
-						MX28_PAD_LCD_D20__GPIO_1_20
-						MX28_PAD_LCD_D21__GPIO_1_21
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_apf28dev: otg-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_16bit_pins_a
-						&lcdif_pins_apf28dev>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <16>;
-					bus-width = <16>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33000033>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <96>;
-							hfront-porch = <96>;
-							vback-porch = <20>;
-							vfront-porch = <21>;
-							hsync-len = <64>;
-							vsync-len = <4>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_apf28dev>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			phy-reset-gpios = <&gpio0 23 0>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 23 1>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio0 21 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-
-		pwms = <&pwm 3 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio0 17 0>;
-			linux,code = <0x100>;
-		};
-	};
-};
diff --git a/src/arm/imx28-apx4devkit.dts b/src/arm/imx28-apx4devkit.dts
deleted file mode 100644
index e1ce9179db63..000000000000
--- a/src/arm/imx28-apx4devkit.dts
+++ /dev/null
@@ -1,226 +0,0 @@
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Bluegiga APX4 Development Kit";
-	compatible = "bluegiga,apx4devkit", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_RDY1__GPIO_0_21
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_JTAG_RTCK__GPIO_4_20
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apx4: lcdif-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-						MX28_PAD_SSP2_SS1__SSP2_D1
-						MX28_PAD_SSP2_SS2__SSP2_D2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_apx4>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <88>;
-							hfront-porch = <40>;
-							vback-porch = <32>;
-							vfront-porch = <13>;
-							hsync-len = <48>;
-							vsync-len = <3>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				pcf8563: rtc@51 {
-					compatible = "phg,pcf8563";
-					reg = <0x51>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_2pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "bluegiga,apx4devkit-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "apx4devkit-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 28 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/src/arm/imx28-cfa10036.dts b/src/arm/imx28-cfa10036.dts
deleted file mode 100644
index b04b6b8850a7..000000000000
--- a/src/arm/imx28-cfa10036.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Crystalfontz CFA-10036 Board";
-	compatible = "crystalfontz,cfa10036", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				ssd1306_cfa10036: ssd1306-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_cfa10036: leds-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_cfa10036: otg-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY0__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x31c3 /*
-						MX28_PAD_PWM3__GPIO_3_28 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_b>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				ssd1306: oled@3c {
-					compatible = "solomon,ssd1306fb-i2c";
-					pinctrl-names = "default";
-					pinctrl-0 = <&ssd1306_cfa10036>;
-					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 0>;
-					solomon,height = <32>;
-					solomon,width = <128>;
-					solomon,page-offset = <0>;
-				};
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_cfa10036>;
-			dr_mode = "peripheral";
-			phy_type = "utmi";
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cfa10036>;
-
-		power {
-			gpios = <&gpio3 4 1>;
-			default-state = "on";
-		};
-	};
-
-	reg_vddio_sd0: vddio-sd0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc_pwr_cfa10036>;
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-};
diff --git a/src/arm/imx28-cfa10037.dts b/src/arm/imx28-cfa10037.dts
deleted file mode 100644
index e5beaa58bb40..000000000000
--- a/src/arm/imx28-cfa10037.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10037 Board";
-	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10037: usb-10037@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10037: mac0-10037@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10037>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10037>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-};
diff --git a/src/arm/imx28-cfa10049.dts b/src/arm/imx28-cfa10049.dts
deleted file mode 100644
index 7d51459de5e8..000000000000
--- a/src/arm/imx28-cfa10049.dts
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10049 Board";
-	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10049: usb-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2cmux_pins_cfa10049: i2cmux-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10049: mac0-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pca_pins_cfa10049: pca-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_pins_cfa10049: rotary-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi2_pins_cfa10049: spi2-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_cfa10049: spi3-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPIO_0_24
-						MX28_PAD_GPMI_RESETN__GPIO_0_28
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_ALE__GPIO_0_26
-						MX28_PAD_GPMI_CLE__GPIO_0_27
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				w1_gpio_pins: w1-gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D21__GPIO_1_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049
-					     &lcdif_pins_cfa10049_pullup>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			i2cmux {
-				compatible = "i2c-mux-gpio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2cmux_pins_cfa10049>;
-				mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-				i2c-parent = <&i2c1>;
-
-				i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					adc0: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					adc1: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-
-					adc2: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@3 {
-					reg = <3>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pca9555: pca9555@20 {
-						compatible = "nxp,pca9555";
-						pinctrl-names = "default";
-						pinctrl-0 = <&pca_pins_cfa10049>;
-						interrupt-parent = <&gpio2>;
-						interrupts = <19 0x2>;
-						gpio-controller;
-						#gpio-cells = <2>;
-						interrupt-controller;
-						#interrupt-cells = <2>;
-						reg = <0x20>;
-					};
-				};
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10049>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10049>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
-		};
-	};
-
-	spi3 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi3_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio0 24 0>;
-		gpio-mosi = <&gpio0 28 0>;
-		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
-		num-chipselects = <3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio5: gpio5@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <2>;
-			spi-max-frequency = <100000>;
-		};
-
-		gpio6: gpio6@1 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <1>;
-			registers-number = <4>;
-			spi-max-frequency = <100000>;
-		};
-
-		dac0: dh2228@2 {
-			compatible = "rohm,dh2228fv";
-			reg = <2>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rotary_button {
-			label = "rotary_button";
-			gpios = <&gpio3 26 1>;
-			debounce-interval = <10>;
-			linux,code = <28>;
-		};
-	};
-
-	rotary {
-		compatible = "rotary-encoder";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_pins_cfa10049>;
-		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
-		linux,axis = <1>; /* REL_Y */
-		rotary-encoder,relative-axis;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-	};
-
-	onewire@0 {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&w1_gpio_pins>;
-		status = "okay";
-		gpios = <&gpio1 21 0>;
-	};
-};
diff --git a/src/arm/imx28-cfa10055.dts b/src/arm/imx28-cfa10055.dts
deleted file mode 100644
index c3900e7ba331..000000000000
--- a/src/arm/imx28-cfa10055.dts
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * 				  Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10055 Board";
-	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055
-					     &lcdif_pins_cfa10055_pullup>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10055>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/src/arm/imx28-cfa10056.dts b/src/arm/imx28-cfa10056.dts
deleted file mode 100644
index cef959a97219..000000000000
--- a/src/arm/imx28-cfa10056.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2013 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10056 Board";
-	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10056: spi2-cfa10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_pins_cfa10056: lcdif-10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						&lcdif_pins_cfa10056
-						&lcdif_pins_cfa10056_pullup >;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <32000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <5>;
-							vsync-len = <5>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10056>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8369: hx8369@0 {
-			compatible = "himax,hx8369a", "himax,hx8369";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-};
diff --git a/src/arm/imx28-cfa10057.dts b/src/arm/imx28-cfa10057.dts
deleted file mode 100644
index c4e00ce4b6da..000000000000
--- a/src/arm/imx28-cfa10057.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10057 Board";
-	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10057: usb-10057@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10057: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
-					     &lcdif_pins_cfa10057>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hfront-porch = <12>;
-							hback-porch = <2>;
-							vfront-porch = <5>;
-							vback-porch = <3>;
-							hsync-len = <2>;
-							vsync-len = <2>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10057>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-};
diff --git a/src/arm/imx28-cfa10058.dts b/src/arm/imx28-cfa10058.dts
deleted file mode 100644
index 7c9cc783f0d1..000000000000
--- a/src/arm/imx28-cfa10058.dts
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2013 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/*
- * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10058 Board";
-	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10058: usb-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10058: lcdif-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						 &lcdif_pins_cfa10058>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <40>;
-							hfront-porch = <40>;
-							vback-porch = <13>;
-							vfront-porch = <29>;
-							hsync-len = <8>;
-							vsync-len = <8>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10058>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/src/arm/imx28-duckbill.dts b/src/arm/imx28-duckbill.dts
deleted file mode 100644
index ce1a7effba37..000000000000
--- a/src/arm/imx28-duckbill.dts
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill";
-	compatible = "i2se,duckbill", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_a: led_gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_a>;
-
-		status {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		failure {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/imx28-eukrea-mbmx283lc.dts b/src/arm/imx28-eukrea-mbmx283lc.dts
deleted file mode 100644
index 7c1572c5a4fb..000000000000
--- a/src/arm/imx28-eukrea-mbmx283lc.dts
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
- */
-
-/dts-v1/;
-#include "imx28-eukrea-mbmx28lc.dtsi"
-
-/ {
-	model = "Eukrea Electromatique MBMX283LC";
-	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x04000000>;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpmi_pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pinctrl{
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_cpuimx283>;
-
-	hog_pins_cpuimx283: hog-cpuimx283@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
diff --git a/src/arm/imx28-eukrea-mbmx287lc.dts b/src/arm/imx28-eukrea-mbmx287lc.dts
deleted file mode 100644
index e773144e1e03..000000000000
--- a/src/arm/imx28-eukrea-mbmx287lc.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
- */
-
-#include "imx28-eukrea-mbmx283lc.dts"
-
-/ {
-	model = "Eukrea Electromatique MBMX287LC";
-	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
-	hog_pins_cpuimx287: hog-cpuimx287@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SPDIF__GPIO_3_27
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
diff --git a/src/arm/imx28-eukrea-mbmx28lc.dtsi b/src/arm/imx28-eukrea-mbmx28lc.dtsi
deleted file mode 100644
index 927b391d2058..000000000000
--- a/src/arm/imx28-eukrea-mbmx28lc.dtsi
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "Eukrea Electromatique MBMX28LC";
-	compatible = "eukrea,mbmx28lc", "fsl,imx28";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 1000000>;
-		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
-		default-brightness-level = <10>;
-	};
-
-	button-sw3 {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
-
-		sw3 {
-			label = "SW3";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
-		};
-	};
-
-	button-sw4 {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
-
-		sw4 {
-			label = "SW4";
-			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
-		};
-	};
-
-	led-d6 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
-
-		led1 {
-			label = "d6";
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	led-d7 {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
-
-		led1 {
-			label = "d7";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-mbmx28lc-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_4pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	sgtl5000: codec@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&saif0>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
-	lcd-supply = <&reg_lcd_3v3>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		model = "43WVF1G-0";
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <9072000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <10>;
-				hfront-porch = <5>;
-				vback-porch = <8>;
-				vfront-porch = <8>;
-				hsync-len = <40>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&pinctrl {
-	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D21__GPIO_1_21
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D20__GPIO_1_20
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_VSYNC__LCD_VSYNC
-			MX28_PAD_LCD_HSYNC__LCD_HSYNC
-			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-			MX28_PAD_LCD_ENABLE__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D23__GPIO_1_23
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D22__GPIO_1_22
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RESET__GPIO_3_30
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D18__GPIO_1_18
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D19__GPIO_1_19
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm4_pins_a>;
-	status = "okay";
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_a>;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	fsl,saif-master = <&saif0>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
-	bus-width = <4>;
-	cd-inverted;
-	status = "okay";
-};
-
-&usb0 {
-	disable-over-current;
-	vbus-supply = <&reg_usb0_vbus>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_pins_b>;
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};
-
-&usbphy1 {
-	status = "okay";
-};
diff --git a/src/arm/imx28-evk.dts b/src/arm/imx28-evk.dts
deleted file mode 100644
index e4cc44c98585..000000000000
--- a/src/arm/imx28-evk.dts
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Freescale i.MX28 Evaluation Kit";
-	compatible = "fsl,imx28-evk", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-					     &gpmi_pins_evk>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio2 12 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp1: ssp@80012000 {
-				compatible = "fsl,imx28-mmc";
-				bus-width = <8>;
-				wp-gpios = <&gpio0 28 0>;
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "sst,sst25vf016b";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP1_CMD__GPIO_2_13
-						MX28_PAD_SSP1_DATA3__GPIO_2_15
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-						MX28_PAD_SSP1_SCK__GPIO_2_12
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_AUART2_TX__GPIO_3_9
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio3_5: led_gpio3_5@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_evk: gpmi-nand-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPMI_CE1N
-						MX28_PAD_GPMI_RDY1__GPMI_READY1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_evk: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_evk>;
-				lcd-supply = <&reg_lcd_3v3>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33500000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <89>;
-							hfront-porch = <164>;
-							vback-porch = <23>;
-							vfront-porch = <10>;
-							hsync-len = <10>;
-							vsync-len = <10>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-				fsl,ave-ctrl = <4>;
-				fsl,ave-delay = <2>;
-				fsl,settling = <10>;
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				at24@51 {
-					compatible = "at24,24c32";
-					pagesize = <32>;
-					reg = <0x51>;
-				};
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_id_pins_a>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_fec_3v3>;
-			phy-reset-gpios = <&gpio4 13 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_fec_3v3: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "fec-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 15 0>;
-		};
-
-		reg_usb0_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-
-		reg_lcd_3v3: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 0>;
-			enable-active-high;
-		};
-
-		reg_can_3v3: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 13 0>;
-			enable-active-high;
-		};
-
-	};
-
-	sound {
-		compatible = "fsl,imx28-evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio3_5>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 5 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/src/arm/imx28-m28.dtsi b/src/arm/imx28-m28.dtsi
deleted file mode 100644
index 759cc56253dd..000000000000
--- a/src/arm/imx28-m28.dtsi
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "imx28.dtsi"
-
-/ {
-	model = "DENX M28";
-	compatible = "denx,m28", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "bootloader";
-					reg = <0x00000000 0x00300000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "environment";
-					reg = <0x00300000 0x00080000>;
-				};
-
-				partition@2 {
-					label = "redundant-environment";
-					reg = <0x00380000 0x00080000>;
-				};
-
-				partition@3 {
-					label = "kernel";
-					reg = <0x00400000 0x00400000>;
-				};
-
-				partition@4 {
-					label = "filesystem";
-					reg = <0x00800000 0x0f800000>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@68 {
-					compatible = "stm,m41t62";
-					reg = <0x68>;
-				};
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/imx28-m28cu3.dts b/src/arm/imx28-m28cu3.dts
deleted file mode 100644
index 9348ce59dda4..000000000000
--- a/src/arm/imx28-m28cu3.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "MSR M28CU3";
-	compatible = "msr,m28cu3", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "gpmi-nfc-0-boot";
-					reg = <0x00000000 0x01400000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "gpmi-nfc-general-use";
-					reg = <0x01400000 0x0ec00000>;
-				};
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_a
-					     &mmc2_cd_cfg
-					     &mmc2_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd1>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-						MX28_PAD_PWM4__GPIO_3_29
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_VSYNC__LCD_VSYNC
-						MX28_PAD_LCD_HSYNC__LCD_HSYNC
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_RESET__LCD_RESET
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_gpio: leds-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_MISO__GPIO_2_26
-						MX28_PAD_SSP3_SCK__GPIO_2_24
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ocotp@8002c000 {
-				status = "okay";
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display>;
-				status = "okay";
-
-				display: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <6410256>;
-							hactive = <320>;
-							vactive = <240>;
-							hback-porch = <38>;
-							hfront-porch = <20>;
-							vback-porch = <15>;
-							vfront-porch = <5>;
-							hsync-len = <30>;
-							vsync-len = <3>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			disable-over-current;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_gpio>;
-
-		user1 {
-			label = "sd0-led";
-			gpios = <&gpio2 26 0>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user2 {
-			label = "sd1-led";
-			gpios = <&gpio2 24 0>;
-			linux,default-trigger = "mmc2";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 0>;
-		};
-
-		reg_vddio_sd1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vddio-sd1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 19 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-	};
-};
diff --git a/src/arm/imx28-m28evk.dts b/src/arm/imx28-m28evk.dts
deleted file mode 100644
index b3c09ae3b928..000000000000
--- a/src/arm/imx28-m28evk.dts
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28-m28.dtsi"
-
-/ {
-	model = "DENX M28EVK";
-	compatible = "denx,m28evk", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio3 10 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p80";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_AUART2_CTS__GPIO_3_10
-						MX28_PAD_AUART2_RTS__GPIO_3_11
-						MX28_PAD_AUART3_RX__GPIO_3_12
-						MX28_PAD_AUART3_TX__GPIO_3_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_ENABLE__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display>;
-				status = "okay";
-
-				display: display {
-					bits-per-pixel = <16>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33260000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <0>;
-							hfront-porch = <256>;
-							vback-porch = <0>;
-							vfront-porch = <45>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				eeprom: eeprom@51 {
-					compatible = "atmel,24c128";
-					reg = <0x51>;
-					pagesize = <32>;
-				};
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_a>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	regulators {
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 12 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 13 0>;
-		};
-	};
-
-	sound {
-		compatible = "denx,m28evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "m28evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
diff --git a/src/arm/imx28-pinfunc.h b/src/arm/imx28-pinfunc.h
deleted file mode 100644
index e11f69ba0fe4..000000000000
--- a/src/arm/imx28-pinfunc.h
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * Header providing constants for i.MX28 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
-#define __DT_BINDINGS_MX28_PINCTRL_H__
-
-#include "mxs-pinfunc.h"
-
-#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
-#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
-#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
-#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
-#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
-#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
-#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
-#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
-#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
-#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
-#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
-#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
-#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
-#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
-#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
-#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
-#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
-#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
-#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
-#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
-#define MX28_PAD_LCD_D00__LCD_D0			0x1000
-#define MX28_PAD_LCD_D01__LCD_D1			0x1010
-#define MX28_PAD_LCD_D02__LCD_D2			0x1020
-#define MX28_PAD_LCD_D03__LCD_D3			0x1030
-#define MX28_PAD_LCD_D04__LCD_D4			0x1040
-#define MX28_PAD_LCD_D05__LCD_D5			0x1050
-#define MX28_PAD_LCD_D06__LCD_D6			0x1060
-#define MX28_PAD_LCD_D07__LCD_D7			0x1070
-#define MX28_PAD_LCD_D08__LCD_D8			0x1080
-#define MX28_PAD_LCD_D09__LCD_D9			0x1090
-#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
-#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
-#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
-#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
-#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
-#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
-#define MX28_PAD_LCD_D16__LCD_D16			0x1100
-#define MX28_PAD_LCD_D17__LCD_D17			0x1110
-#define MX28_PAD_LCD_D18__LCD_D18			0x1120
-#define MX28_PAD_LCD_D19__LCD_D19			0x1130
-#define MX28_PAD_LCD_D20__LCD_D20			0x1140
-#define MX28_PAD_LCD_D21__LCD_D21			0x1150
-#define MX28_PAD_LCD_D22__LCD_D22			0x1160
-#define MX28_PAD_LCD_D23__LCD_D23			0x1170
-#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
-#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
-#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
-#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
-#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
-#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
-#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
-#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
-#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
-#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
-#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
-#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
-#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
-#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
-#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
-#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
-#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
-#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
-#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
-#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
-#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
-#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
-#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
-#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
-#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
-#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
-#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
-#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
-#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
-#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
-#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
-#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
-#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
-#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
-#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
-#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
-#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
-#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
-#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
-#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
-#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
-#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
-#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
-#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
-#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
-#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
-#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
-#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
-#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
-#define MX28_PAD_PWM0__PWM_0				0x3100
-#define MX28_PAD_PWM1__PWM_1				0x3110
-#define MX28_PAD_PWM2__PWM_2				0x3120
-#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
-#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
-#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
-#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
-#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
-#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
-#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
-#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
-#define MX28_PAD_PWM3__PWM_3				0x31c0
-#define MX28_PAD_PWM4__PWM_4				0x31d0
-#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
-#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
-#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
-#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
-#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
-#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
-#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
-#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
-#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
-#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
-#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
-#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
-#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
-#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
-#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
-#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
-#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
-#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
-#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
-#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
-#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
-#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
-#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
-#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
-#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
-#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
-#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
-#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
-#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
-#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
-#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
-#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
-#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
-#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
-#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
-#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
-#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
-#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
-#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
-#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
-#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
-#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
-#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
-#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
-#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
-#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
-#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
-#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
-#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
-#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
-#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
-#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
-#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
-#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
-#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
-#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
-#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
-#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
-#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
-#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
-#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
-#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
-#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
-#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
-#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
-#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
-#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
-#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
-#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
-#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
-#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
-#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
-#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
-#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
-#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
-#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
-#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
-#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
-#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
-#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
-#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
-#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
-#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
-#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
-#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
-#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
-#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
-#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
-#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
-#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
-#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
-#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
-#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
-#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
-#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
-#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
-#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
-#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
-#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
-#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
-#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
-#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
-#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
-#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
-#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
-#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
-#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
-#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
-#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
-#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
-#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
-#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
-#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
-#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
-#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
-#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
-#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
-#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
-#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
-#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
-#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
-#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
-#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
-#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
-#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
-#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
-#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
-#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
-#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
-#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
-#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
-#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
-#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
-#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
-#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
-#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
-#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
-#define MX28_PAD_PWM0__I2C1_SCL				0x3101
-#define MX28_PAD_PWM1__I2C1_SDA				0x3111
-#define MX28_PAD_PWM2__USB0_ID				0x3121
-#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
-#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
-#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
-#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
-#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
-#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
-#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
-#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
-#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
-#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
-#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
-#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
-#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
-#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
-#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
-#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
-#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
-#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
-#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
-#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
-#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
-#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
-#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
-#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
-#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
-#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
-#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
-#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
-#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
-#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
-#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
-#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
-#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
-#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
-#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
-#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
-#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
-#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
-#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
-#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
-#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
-#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
-#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
-#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
-#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
-#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
-#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
-#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
-#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
-#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
-#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
-#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
-#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
-#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
-#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
-#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
-#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
-#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
-#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
-#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
-#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
-#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
-#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
-#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
-#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
-#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
-#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
-#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
-#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
-#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
-#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
-#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
-#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
-#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
-#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
-#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
-#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
-#define MX28_PAD_AUART1_RX__PWM_0			0x3042
-#define MX28_PAD_AUART1_TX__PWM_1			0x3052
-#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
-#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
-#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
-#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
-#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
-#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
-#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
-#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
-#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
-#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
-#define MX28_PAD_PWM0__DUART_RX				0x3102
-#define MX28_PAD_PWM1__DUART_TX				0x3112
-#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
-#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
-#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
-#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
-#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
-#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
-#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
-#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
-#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
-#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
-#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
-#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
-#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
-#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
-#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
-#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
-#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
-#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
-#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
-#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
-#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
-#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
-#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
-#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
-#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
-#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
-#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
-#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
-#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
-#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
-#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
-#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
-#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
-#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
-#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
-#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
-#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
-#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
-#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
-#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
-#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
-#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
-#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
-#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
-#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
-#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
-#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
-#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
-#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
-#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
-#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
-#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
-#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
-#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
-#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
-#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
-#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
-#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
-#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
-#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
-#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
-#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
-#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
-#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
-#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
-#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
-#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
-#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
-#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
-#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
-#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
-#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
-#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
-#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
-#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
-#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
-#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
-#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
-#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
-#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
-#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
-#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
-#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
-#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
-#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
-#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
-#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
-#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
-#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
-#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
-#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
-#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
-#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
-#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
-#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
-#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
-#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
-#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
-#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
-#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
-#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
-#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
-#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
-#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
-#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
-#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
-#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
-#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
-#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
-#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
-#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
-#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
-#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
-#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
-#define MX28_PAD_PWM0__GPIO_3_16			0x3103
-#define MX28_PAD_PWM1__GPIO_3_17			0x3113
-#define MX28_PAD_PWM2__GPIO_3_18			0x3123
-#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
-#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
-#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
-#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
-#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
-#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
-#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
-#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
-#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
-#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
-#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
-#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
-#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
-#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
-#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
-#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
-#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
-#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
-#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
-#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
-#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
-#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
-#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
-#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
-#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
-#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
-#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
-#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
-#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
-
-#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/src/arm/imx28-sps1.dts b/src/arm/imx28-sps1.dts
deleted file mode 100644
index 0ce3cb8e7914..000000000000
--- a/src/arm/imx28-sps1.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "SchulerControl GmbH, SC SPS 1";
-	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
-
-	memory {
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog-gpios@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPIO_0_0
-						MX28_PAD_GPMI_D03__GPIO_0_3
-						MX28_PAD_GPMI_D06__GPIO_0_6
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256", "mr25h256";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				eeprom: eeprom@52 {
-					compatible = "atmel,24c64";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_b>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-		};
-	};
-
-	leds {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led@1 {
-			label = "sps1-1:yellow:user";
-			gpios = <&gpio0 6 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <0>;
-		};
-
-		led@2 {
-			label = "sps1-2:red:user";
-			gpios = <&gpio0 3 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <1>;
-		};
-
-		led@3 {
-			label = "sps1-3:red:user";
-			gpios = <&gpio0 0 0>;
-			default-trigger = "heartbeat";
-			reg = <2>;
-		};
-
-	};
-};
diff --git a/src/arm/imx28-tx28.dts b/src/arm/imx28-tx28.dts
deleted file mode 100644
index e14bd86f3e99..000000000000
--- a/src/arm/imx28-tx28.dts
+++ /dev/null
@@ -1,661 +0,0 @@
-/*
- * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
- * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Ka-Ro electronics TX28 module";
-	compatible = "karo,tx28", "fsl,imx28";
-
-	aliases {
-		can0 = &can0;
-		can1 = &can1;
-		display = &display;
-		ds1339 = &ds1339;
-		gpio5 = &gpio5;
-		lcdif = &lcdif;
-		lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
-		lcdif_24bit_pins = &lcdif_24bit_pins_a;
-		stk5led = &user_led;
-		usbotg = &usb0;
-	};
-
-	memory {
-		reg = <0 0>; /* will be filled in by U-Boot */
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		gpios = <&gpio2 7 0>;
-		status = "disabled";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 18 0>;
-			enable-active-high;
-		};
-
-		reg_usb1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 27 0>;
-			enable-active-high;
-		};
-
-		reg_2p5v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_can_xcvr: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 0 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
-		};
-
-		reg_lcd: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "LCD POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 31 0>;
-			enable-active-high;
-		};
-
-		reg_lcd_reset: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "LCD RESET";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 0>;
-			startup-delay-us = <300000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mclk: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-tx28-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-tx28-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led: user {
-			label = "Heartbeat";
-			gpios = <&gpio4 10 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 500000>;
-		/*
-		 * a silly way to create a 1:1 relationship between the
-		 * PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	matrix_keypad: matrix-keypad@0 {
-		compatible = "gpio-matrix-keypad";
-		col-gpios = <
-			&gpio5 0 0
-			&gpio5 1 0
-			&gpio5 2 0
-			&gpio5 3 0
-		>;
-		row-gpios = <
-			&gpio5 4 0
-			&gpio5 5 0
-			&gpio5 6 0
-			&gpio5 7 0
-		>;
-		/* sample keymap */
-		linux,keymap = <
-			0x00000074 /* row 0, col 0, KEY_POWER */
-			0x00010052 /* row 0, col 1, KEY_KP0 */
-			0x0002004f /* row 0, col 2, KEY_KP1 */
-			0x00030050 /* row 0, col 3, KEY_KP2 */
-			0x01000051 /* row 1, col 0, KEY_KP3 */
-			0x0101004b /* row 1, col 1, KEY_KP4 */
-			0x0102004c /* row 1, col 2, KEY_KP5 */
-			0x0103004d /* row 1, col 3, KEY_KP6 */
-			0x02000047 /* row 2, col 0, KEY_KP7 */
-			0x02010048 /* row 2, col 1, KEY_KP8 */
-			0x02020049 /* row 2, col 2, KEY_KP9 */
-		>;
-		gpio-activelow;
-		linux,wakeup;
-		debounce-delay-ms = <100>;
-		col-scan-delay-us = <5000>;
-		linux,no-autorepeat;
-	};
-};
-
-/* 2nd TX-Std UART - (A)UART1  */
-&auart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart1_pins_a>;
-	status = "okay";
-};
-
-/* 3rd TX-Std UART - (A)UART3  */
-&auart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart3_pins_a>;
-	status = "okay";
-};
-
-&can0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can0_pins_a>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&can1_pins_a>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&digctl {
-	status = "okay";
-};
-
-/* 1st TX-Std UART - (D)UART */
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_4pins_a>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	sgtl5000: sgtl5000@0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&mclk>;
-	};
-
-	gpio5: pca953x@20 {
-		compatible = "nxp,pca9554";
-		reg = <0x20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_pca9554_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <5 0>;
-		reset-gpios = <&gpio2 6 1>;
-		wake-gpios = <&gpio4 9 0>;
-	};
-
-	touchscreen: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tx28_tsc2007_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
-		pendown-gpio = <&gpio3 20 1>;
-		ti,x-plate-ohms = /bits/ 16 <660>;
-	};
-
-	ds1339: rtc@68 {
-		compatible = "mxim,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
-	lcd-supply = <&reg_lcd>;
-	display = <&display>;
-	status = "okay";
-
-	display: display@0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-		display-timings {
-			native-mode = <&timing5>;
-			timing0: timing0 {
-				panel-name = "VGA";
-				clock-frequency = <25175000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing1: timing1 {
-				panel-name = "ETV570";
-				clock-frequency = <25175000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing2: timing2 {
-				panel-name = "ET0350";
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing3: timing3 {
-				panel-name = "ET0430";
-				clock-frequency = <9000000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing4: timing4 {
-				panel-name = "ET0500", "ET0700";
-				clock-frequency = <33260000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			timing5: timing5 {
-				panel-name = "ETQ570";
-				clock-frequency = <6400000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&lradc {
-	fsl,lradc-touchscreen-wires = <4>;
-	status = "okay";
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default", "gpio_mode";
-	pinctrl-0 = <&mac0_pins_a>;
-	pinctrl-1 = <&tx28_mac0_pins_gpio>;
-	status = "okay";
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	/* not enabled by default */
-};
-
-&mxs_rtc {
-	status = "okay";
-};
-
-&ocotp {
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
-			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
-			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_D00__GPIO_1_0
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
-		fsl,pinmux-ids = <
-			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
-			MX28_PAD_LCD_D01__LCD_D1
-			MX28_PAD_LCD_D02__LCD_D2
-			MX28_PAD_LCD_D03__LCD_D3
-			MX28_PAD_LCD_D04__LCD_D4
-			MX28_PAD_LCD_D05__LCD_D5
-			MX28_PAD_LCD_D06__LCD_D6
-			MX28_PAD_LCD_D07__LCD_D7
-			MX28_PAD_LCD_D08__LCD_D8
-			MX28_PAD_LCD_D09__LCD_D9
-			MX28_PAD_LCD_D10__LCD_D10
-			MX28_PAD_LCD_D11__LCD_D11
-			MX28_PAD_LCD_D12__LCD_D12
-			MX28_PAD_LCD_D13__LCD_D13
-			MX28_PAD_LCD_D14__LCD_D14
-			MX28_PAD_LCD_D15__LCD_D15
-			MX28_PAD_LCD_D16__LCD_D16
-			MX28_PAD_LCD_D17__LCD_D17
-			MX28_PAD_LCD_D18__LCD_D18
-			MX28_PAD_LCD_D19__LCD_D19
-			MX28_PAD_LCD_D20__LCD_D20
-			MX28_PAD_LCD_D21__LCD_D21
-			MX28_PAD_LCD_D22__LCD_D22
-			MX28_PAD_LCD_D23__LCD_D23
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
-			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_ENET0_MDC__GPIO_4_0
-			MX28_PAD_ENET0_MDIO__GPIO_4_1
-			MX28_PAD_ENET0_RX_EN__GPIO_4_2
-			MX28_PAD_ENET0_RXD0__GPIO_4_3
-			MX28_PAD_ENET0_RXD1__GPIO_4_4
-			MX28_PAD_ENET0_TX_EN__GPIO_4_6
-			MX28_PAD_ENET0_TXD0__GPIO_4_7
-			MX28_PAD_ENET0_TXD1__GPIO_4_8
-			MX28_PAD_ENET_CLK__GPIO_4_16
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_pca9554_pins: tx28-pca9554-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_PWM3__GPIO_3_28
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_tsc2007_pins: tx28-tsc2007-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-
-	tx28_usbphy0_pins: tx28-usbphy0-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
-			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_12mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	tx28_usbphy1_pins: tx28-usbphy1-pins {
-		fsl,pinmux-ids = <
-			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
-			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
-		>;
-		fsl,drive-strength = <MXS_DRIVE_12mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&saif0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif0_pins_b>;
-	fsl,saif-master;
-	status = "okay";
-};
-
-&saif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&saif1_pins_a>;
-	status = "okay";
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default", "special";
-	pinctrl-0 = <&mmc0_4bit_pins_a
-		     &mmc0_cd_cfg
-		     &mmc0_sck_cfg>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ssp3 {
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi3_pins_a>;
-	clock-frequency = <57600000>;
-	status = "okay";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <57600000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <57600000>;
-	};
-};
-
-&usb0 {
-	vbus-supply = <&reg_usb0_vbus>;
-	disable-over-current;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&reg_usb1_vbus>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tx28_usbphy0_pins>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbphy1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tx28_usbphy1_pins>;
-	phy_type = "utmi";
-	status = "okay";
-};
diff --git a/src/arm/imx28.dtsi b/src/arm/imx28.dtsi
deleted file mode 100644
index a95cc5358ff4..000000000000
--- a/src/arm/imx28.dtsi
+++ /dev/null
@@ -1,1193 +0,0 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
-#include "imx28-pinfunc.h"
-
-/ {
-	interrupt-parent = <&icoll>;
-
-	aliases {
-		ethernet0 = &mac0;
-		ethernet1 = &mac1;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-		gpio3 = &gpio3;
-		gpio4 = &gpio4;
-		saif0 = &saif0;
-		saif1 = &saif1;
-		serial0 = &auart0;
-		serial1 = &auart1;
-		serial2 = &auart2;
-		serial3 = &auart3;
-		serial4 = &auart4;
-		spi0 = &ssp1;
-		spi1 = &ssp2;
-		usbphy0 = &usbphy0;
-		usbphy1 = &usbphy1;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	apb@80000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80000000 0x80000>;
-		ranges;
-
-		apbh@80000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x3c900>;
-			ranges;
-
-			icoll: interrupt-controller@80000000 {
-				compatible = "fsl,imx28-icoll", "fsl,icoll";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x80000000 0x2000>;
-			};
-
-			hsadc: hsadc@80002000 {
-				reg = <0x80002000 0x2000>;
-				interrupts = <13>;
-				dmas = <&dma_apbh 12>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			dma_apbh: dma-apbh@80004000 {
-				compatible = "fsl,imx28-dma-apbh";
-				reg = <0x80004000 0x2000>;
-				interrupts = <82 83 84 85
-					      88 88 88 88
-					      88 88 88 88
-					      87 86 0 0>;
-				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
-						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
-						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
-						  "hsadc", "lcdif", "empty", "empty";
-				#dma-cells = <1>;
-				dma-channels = <16>;
-				clocks = <&clks 25>;
-			};
-
-			perfmon: perfmon@80006000 {
-				reg = <0x80006000 0x800>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			gpmi: gpmi-nand@8000c000 {
-				compatible = "fsl,imx28-gpmi-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
-				reg-names = "gpmi-nand", "bch";
-				interrupts = <41>;
-				interrupt-names = "bch";
-				clocks = <&clks 50>;
-				clock-names = "gpmi_io";
-				dmas = <&dma_apbh 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp0: ssp@80010000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80010000 0x2000>;
-				interrupts = <96>;
-				clocks = <&clks 46>;
-				dmas = <&dma_apbh 0>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp1: ssp@80012000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80012000 0x2000>;
-				interrupts = <97>;
-				clocks = <&clks 47>;
-				dmas = <&dma_apbh 1>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80014000 0x2000>;
-				interrupts = <98>;
-				clocks = <&clks 48>;
-				dmas = <&dma_apbh 2>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			ssp3: ssp@80016000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x80016000 0x2000>;
-				interrupts = <99>;
-				clocks = <&clks 49>;
-				dmas = <&dma_apbh 3>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			pinctrl: pinctrl@80018000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-pinctrl", "simple-bus";
-				reg = <0x80018000 0x2000>;
-
-				gpio0: gpio@0 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					interrupts = <127>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio1: gpio@1 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					interrupts = <126>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@2 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					interrupts = <125>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio3: gpio@3 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					interrupts = <124>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio4: gpio@4 {
-					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
-					interrupts = <123>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				duart_pins_a: duart@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM0__DUART_RX
-						MX28_PAD_PWM1__DUART_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				duart_pins_b: duart@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_CTS__DUART_RX
-						MX28_PAD_AUART0_RTS__DUART_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				duart_4pins_a: duart-4pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_CTS__DUART_RX
-						MX28_PAD_AUART0_RTS__DUART_TX
-						MX28_PAD_AUART0_RX__DUART_CTS
-						MX28_PAD_AUART0_TX__DUART_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_a: gpmi-nand@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPMI_D0
-						MX28_PAD_GPMI_D01__GPMI_D1
-						MX28_PAD_GPMI_D02__GPMI_D2
-						MX28_PAD_GPMI_D03__GPMI_D3
-						MX28_PAD_GPMI_D04__GPMI_D4
-						MX28_PAD_GPMI_D05__GPMI_D5
-						MX28_PAD_GPMI_D06__GPMI_D6
-						MX28_PAD_GPMI_D07__GPMI_D7
-						MX28_PAD_GPMI_CE0N__GPMI_CE0N
-						MX28_PAD_GPMI_RDY0__GPMI_READY0
-						MX28_PAD_GPMI_RDN__GPMI_RDN
-						MX28_PAD_GPMI_WRN__GPMI_WRN
-						MX28_PAD_GPMI_ALE__GPMI_ALE
-						MX28_PAD_GPMI_CLE__GPMI_CLE
-						MX28_PAD_GPMI_RESETN__GPMI_RESETN
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_status_cfg: gpmi-status-cfg {
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPMI_RDN
-						MX28_PAD_GPMI_WRN__GPMI_WRN
-						MX28_PAD_GPMI_RESETN__GPMI_RESETN
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-				};
-
-				auart0_pins_a: auart0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RX__AUART0_RX
-						MX28_PAD_AUART0_TX__AUART0_TX
-						MX28_PAD_AUART0_CTS__AUART0_CTS
-						MX28_PAD_AUART0_RTS__AUART0_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart0_2pins_a: auart0-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RX__AUART0_RX
-						MX28_PAD_AUART0_TX__AUART0_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart1_pins_a: auart1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__AUART1_RX
-						MX28_PAD_AUART1_TX__AUART1_TX
-						MX28_PAD_AUART1_CTS__AUART1_CTS
-						MX28_PAD_AUART1_RTS__AUART1_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart1_2pins_a: auart1-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__AUART1_RX
-						MX28_PAD_AUART1_TX__AUART1_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart2_2pins_a: auart2-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__AUART2_RX
-						MX28_PAD_SSP2_MOSI__AUART2_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart2_2pins_b: auart2-2pins@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART2_RX__AUART2_RX
-						MX28_PAD_AUART2_TX__AUART2_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart2_pins_a: auart2-pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART2_RX__AUART2_RX
-						MX28_PAD_AUART2_TX__AUART2_TX
-						MX28_PAD_AUART2_CTS__AUART2_CTS
-						MX28_PAD_AUART2_RTS__AUART2_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart3_pins_a: auart3@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART3_RX__AUART3_RX
-						MX28_PAD_AUART3_TX__AUART3_TX
-						MX28_PAD_AUART3_CTS__AUART3_CTS
-						MX28_PAD_AUART3_RTS__AUART3_RTS
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart3_2pins_a: auart3-2pins@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_MISO__AUART3_RX
-						MX28_PAD_SSP2_SS0__AUART3_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart3_2pins_b: auart3-2pins@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART3_RX__AUART3_RX
-						MX28_PAD_AUART3_TX__AUART3_TX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				auart4_2pins_a: auart4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_SCK__AUART4_TX
-						MX28_PAD_SSP3_MOSI__AUART4_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_a: mac0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_ENET0_MDC__ENET0_MDC
-						MX28_PAD_ENET0_MDIO__ENET0_MDIO
-						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
-						MX28_PAD_ENET0_RXD0__ENET0_RXD0
-						MX28_PAD_ENET0_RXD1__ENET0_RXD1
-						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
-						MX28_PAD_ENET0_TXD0__ENET0_TXD0
-						MX28_PAD_ENET0_TXD1__ENET0_TXD1
-						MX28_PAD_ENET_CLK__CLKCTRL_ENET
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mac1_pins_a: mac1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_ENET0_CRS__ENET1_RX_EN
-						MX28_PAD_ENET0_RXD2__ENET1_RXD0
-						MX28_PAD_ENET0_RXD3__ENET1_RXD1
-						MX28_PAD_ENET0_COL__ENET1_TX_EN
-						MX28_PAD_ENET0_TXD2__ENET1_TXD0
-						MX28_PAD_ENET0_TXD3__ENET1_TXD1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_8bit_pins_a: mmc0-8bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA0__SSP0_D0
-						MX28_PAD_SSP0_DATA1__SSP0_D1
-						MX28_PAD_SSP0_DATA2__SSP0_D2
-						MX28_PAD_SSP0_DATA3__SSP0_D3
-						MX28_PAD_SSP0_DATA4__SSP0_D4
-						MX28_PAD_SSP0_DATA5__SSP0_D5
-						MX28_PAD_SSP0_DATA6__SSP0_D6
-						MX28_PAD_SSP0_DATA7__SSP0_D7
-						MX28_PAD_SSP0_CMD__SSP0_CMD
-						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
-						MX28_PAD_SSP0_SCK__SSP0_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_4bit_pins_a: mmc0-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA0__SSP0_D0
-						MX28_PAD_SSP0_DATA1__SSP0_D1
-						MX28_PAD_SSP0_DATA2__SSP0_D2
-						MX28_PAD_SSP0_DATA3__SSP0_D3
-						MX28_PAD_SSP0_CMD__SSP0_CMD
-						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
-						MX28_PAD_SSP0_SCK__SSP0_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc0_cd_cfg: mmc0-cd-cfg {
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc0_sck_cfg: mmc0-sck-cfg {
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_SCK__SSP0_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_a: mmc2-4bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP1_SCK__SSP2_D1
-						MX28_PAD_SSP1_CMD__SSP2_D2
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_cd_cfg: mmc2-cd-cfg {
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
-					>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_sck_cfg: mmc2-sck-cfg {
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2c0_pins_a: i2c0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__I2C0_SCL
-						MX28_PAD_I2C0_SDA__I2C0_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c0_pins_b: i2c0@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RX__I2C0_SCL
-						MX28_PAD_AUART0_TX__I2C0_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				i2c1_pins_a: i2c1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM0__I2C1_SCL
-						MX28_PAD_PWM1__I2C1_SDA
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				saif0_pins_a: saif0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
-						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
-						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
-						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				saif0_pins_b: saif0@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
-						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
-						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				saif1_pins_a: saif1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				pwm0_pins_a: pwm0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM0__PWM_0
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm2_pins_a: pwm2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM2__PWM_2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm3_pins_a: pwm3@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__PWM_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm3_pins_b: pwm3@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__PWM_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pwm4_pins_a: pwm4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM4__PWM_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_24bit_pins_a: lcdif-24bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-						MX28_PAD_LCD_D18__LCD_D18
-						MX28_PAD_LCD_D19__LCD_D19
-						MX28_PAD_LCD_D20__LCD_D20
-						MX28_PAD_LCD_D21__LCD_D21
-						MX28_PAD_LCD_D22__LCD_D22
-						MX28_PAD_LCD_D23__LCD_D23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_a: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_16bit_pins_a: lcdif-16bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_sync_pins_a: lcdif-sync@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				can0_pins_a: can0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY2__CAN0_TX
-						MX28_PAD_GPMI_RDY3__CAN0_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				can1_pins_a: can1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE2N__CAN1_TX
-						MX28_PAD_GPMI_CE3N__CAN1_RX
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				spi2_pins_a: spi2@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__SSP2_SCK
-						MX28_PAD_SSP2_MOSI__SSP2_CMD
-						MX28_PAD_SSP2_MISO__SSP2_D0
-						MX28_PAD_SSP2_SS0__SSP2_D3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_a: spi3@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART2_RX__SSP3_D4
-						MX28_PAD_AUART2_TX__SSP3_D5
-						MX28_PAD_SSP3_SCK__SSP3_SCK
-						MX28_PAD_SSP3_MOSI__SSP3_CMD
-						MX28_PAD_SSP3_MISO__SSP3_D0
-						MX28_PAD_SSP3_SS0__SSP3_D3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_pins_a: usb0@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_pins_b: usb0@1 {
-					reg = <1>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb1_pins_a: usb1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_id_pins_a: usb0id@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RTS__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				usb0_id_pins_b: usb0id1@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM2__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-			};
-
-			digctl: digctl@8001c000 {
-				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
-				reg = <0x8001c000 0x2000>;
-				interrupts = <89>;
-				status = "disabled";
-			};
-
-			etm: etm@80022000 {
-				reg = <0x80022000 0x2000>;
-				status = "disabled";
-			};
-
-			dma_apbx: dma-apbx@80024000 {
-				compatible = "fsl,imx28-dma-apbx";
-				reg = <0x80024000 0x2000>;
-				interrupts = <78 79 66 0
-					      80 81 68 69
-					      70 71 72 73
-					      74 75 76 77>;
-				interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
-						  "saif0", "saif1", "i2c0", "i2c1",
-						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
-						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
-				#dma-cells = <1>;
-				dma-channels = <16>;
-				clocks = <&clks 26>;
-			};
-
-			dcp: dcp@80028000 {
-				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
-				reg = <0x80028000 0x2000>;
-				interrupts = <52 53 54>;
-				status = "okay";
-			};
-
-			pxp: pxp@8002a000 {
-				reg = <0x8002a000 0x2000>;
-				interrupts = <39>;
-				status = "disabled";
-			};
-
-			ocotp: ocotp@8002c000 {
-				compatible = "fsl,ocotp";
-				reg = <0x8002c000 0x2000>;
-				status = "disabled";
-			};
-
-			axi-ahb@8002e000 {
-				reg = <0x8002e000 0x2000>;
-				status = "disabled";
-			};
-
-			lcdif: lcdif@80030000 {
-				compatible = "fsl,imx28-lcdif";
-				reg = <0x80030000 0x2000>;
-				interrupts = <38>;
-				clocks = <&clks 55>;
-				dmas = <&dma_apbh 13>;
-				dma-names = "rx";
-				status = "disabled";
-			};
-
-			can0: can@80032000 {
-				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
-				reg = <0x80032000 0x2000>;
-				interrupts = <8>;
-				clocks = <&clks 58>, <&clks 58>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			can1: can@80034000 {
-				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
-				reg = <0x80034000 0x2000>;
-				interrupts = <9>;
-				clocks = <&clks 59>, <&clks 59>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			simdbg: simdbg@8003c000 {
-				reg = <0x8003c000 0x200>;
-				status = "disabled";
-			};
-
-			simgpmisel: simgpmisel@8003c200 {
-				reg = <0x8003c200 0x100>;
-				status = "disabled";
-			};
-
-			simsspsel: simsspsel@8003c300 {
-				reg = <0x8003c300 0x100>;
-				status = "disabled";
-			};
-
-			simmemsel: simmemsel@8003c400 {
-				reg = <0x8003c400 0x100>;
-				status = "disabled";
-			};
-
-			gpiomon: gpiomon@8003c500 {
-				reg = <0x8003c500 0x100>;
-				status = "disabled";
-			};
-
-			simenet: simenet@8003c700 {
-				reg = <0x8003c700 0x100>;
-				status = "disabled";
-			};
-
-			armjtag: armjtag@8003c800 {
-				reg = <0x8003c800 0x100>;
-				status = "disabled";
-			};
-		};
-
-		apbx@80040000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80040000 0x40000>;
-			ranges;
-
-			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
-				reg = <0x80040000 0x2000>;
-				#clock-cells = <1>;
-			};
-
-			saif0: saif@80042000 {
-				compatible = "fsl,imx28-saif";
-				reg = <0x80042000 0x2000>;
-				interrupts = <59>;
-				#clock-cells = <0>;
-				clocks = <&clks 53>;
-				dmas = <&dma_apbx 4>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			power: power@80044000 {
-				reg = <0x80044000 0x2000>;
-				status = "disabled";
-			};
-
-			saif1: saif@80046000 {
-				compatible = "fsl,imx28-saif";
-				reg = <0x80046000 0x2000>;
-				interrupts = <58>;
-				clocks = <&clks 54>;
-				dmas = <&dma_apbx 5>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			lradc: lradc@80050000 {
-				compatible = "fsl,imx28-lradc";
-				reg = <0x80050000 0x2000>;
-				interrupts = <10 14 15 16 17 18 19
-						20 21 22 23 24 25>;
-				status = "disabled";
-				clocks = <&clks 41>;
-				#io-channel-cells = <1>;
-			};
-
-			spdif: spdif@80054000 {
-				reg = <0x80054000 0x2000>;
-				interrupts = <45>;
-				dmas = <&dma_apbx 2>;
-				dma-names = "tx";
-				status = "disabled";
-			};
-
-			mxs_rtc: rtc@80056000 {
-				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x80056000 0x2000>;
-				interrupts = <29>;
-			};
-
-			i2c0: i2c@80058000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-i2c";
-				reg = <0x80058000 0x2000>;
-				interrupts = <111>;
-				clock-frequency = <100000>;
-				dmas = <&dma_apbx 6>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			i2c1: i2c@8005a000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-i2c";
-				reg = <0x8005a000 0x2000>;
-				interrupts = <110>;
-				clock-frequency = <100000>;
-				dmas = <&dma_apbx 7>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			pwm: pwm@80064000 {
-				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
-				reg = <0x80064000 0x2000>;
-				clocks = <&clks 44>;
-				#pwm-cells = <2>;
-				fsl,pwm-number = <8>;
-				status = "disabled";
-			};
-
-			timer: timrot@80068000 {
-				compatible = "fsl,imx28-timrot", "fsl,timrot";
-				reg = <0x80068000 0x2000>;
-				interrupts = <48 49 50 51>;
-				clocks = <&clks 26>;
-			};
-
-			auart0: serial@8006a000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x8006a000 0x2000>;
-				interrupts = <112>;
-				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart1: serial@8006c000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x8006c000 0x2000>;
-				interrupts = <113>;
-				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart2: serial@8006e000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x8006e000 0x2000>;
-				interrupts = <114>;
-				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart3: serial@80070000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x80070000 0x2000>;
-				interrupts = <115>;
-				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			auart4: serial@80072000 {
-				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-				reg = <0x80072000 0x2000>;
-				interrupts = <116>;
-				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
-				dma-names = "rx", "tx";
-				clocks = <&clks 45>;
-				status = "disabled";
-			};
-
-			duart: serial@80074000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x80074000 0x1000>;
-				interrupts = <47>;
-				clocks = <&clks 45>, <&clks 26>;
-				clock-names = "uart", "apb_pclk";
-				status = "disabled";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
-				reg = <0x8007c000 0x2000>;
-				clocks = <&clks 62>;
-				status = "disabled";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
-				reg = <0x8007e000 0x2000>;
-				clocks = <&clks 63>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x80080000 0x80000>;
-		ranges;
-
-		usb0: usb@80080000 {
-			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
-			reg = <0x80080000 0x10000>;
-			interrupts = <93>;
-			clocks = <&clks 60>;
-			fsl,usbphy = <&usbphy0>;
-			status = "disabled";
-		};
-
-		usb1: usb@80090000 {
-			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
-			reg = <0x80090000 0x10000>;
-			interrupts = <92>;
-			clocks = <&clks 61>;
-			fsl,usbphy = <&usbphy1>;
-			status = "disabled";
-		};
-
-		dflpt: dflpt@800c0000 {
-			reg = <0x800c0000 0x10000>;
-			status = "disabled";
-		};
-
-		mac0: ethernet@800f0000 {
-			compatible = "fsl,imx28-fec";
-			reg = <0x800f0000 0x4000>;
-			interrupts = <101>;
-			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
-			clock-names = "ipg", "ahb", "enet_out";
-			status = "disabled";
-		};
-
-		mac1: ethernet@800f4000 {
-			compatible = "fsl,imx28-fec";
-			reg = <0x800f4000 0x4000>;
-			interrupts = <102>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "disabled";
-		};
-
-		etn_switch: switch@800f8000 {
-			reg = <0x800f8000 0x8000>;
-			status = "disabled";
-		};
-	};
-
-	iio_hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&lradc 8>;
-	};
-};
diff --git a/src/arm/imx31-bug.dts b/src/arm/imx31-bug.dts
deleted file mode 100644
index 2424abfc9c7b..000000000000
--- a/src/arm/imx31-bug.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx31.dtsi"
-
-/ {
-	model = "Buglabs i.MX31 Bug 1.x";
-	compatible = "buglabs,imx31-bug", "fsl,imx31";
-
-	memory {
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&uart5 {
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
diff --git a/src/arm/imx31.dtsi b/src/arm/imx31.dtsi
deleted file mode 100644
index c34f82581248..000000000000
--- a/src/arm/imx31.dtsi
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1136";
-			device_type = "cpu";
-		};
-	};
-
-	avic: avic-interrupt-controller@60000000 {
-		compatible = "fsl,imx31-avic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x60000000 0x100000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
-		ranges;
-
-		aips@43f00000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x43f00000 0x100000>;
-			ranges;
-
-			uart1: serial@43f90000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43f90000 0x4000>;
-				interrupts = <45>;
-				clocks = <&clks 10>, <&clks 30>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@43f94000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43f94000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks 10>, <&clks 31>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@43fb0000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43fb0000 0x4000>;
-				clocks = <&clks 10>, <&clks 49>;
-				clock-names = "ipg", "per";
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			uart5: serial@43fb4000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x43fb4000 0x4000>;
-				interrupts = <47>;
-				clocks = <&clks 10>, <&clks 50>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		spba@50000000 {
-			compatible = "fsl,spba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x100000>;
-			ranges;
-
-			uart3: serial@5000c000 {
-				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-				reg = <0x5000c000 0x4000>;
-				interrupts = <18>;
-				clocks = <&clks 10>, <&clks 48>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			iim: iim@5001c000 {
-				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
-				reg = <0x5001c000 0x1000>;
-				interrupts = <19>;
-				clocks = <&clks 25>;
-			};
-
-			clks: ccm@53f80000{
-				compatible = "fsl,imx31-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <0 31 0x04 0 53 0x04>;
-				#clock-cells = <1>;
-			};
-		};
-
-		aips@53f00000 { /* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x53f00000 0x100000>;
-			ranges;
-
-			gpt: timer@53f90000 {
-				compatible = "fsl,imx31-gpt";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks 10>, <&clks 22>;
-				clock-names = "ipg", "per";
-			};
-		};
-	};
-};
diff --git a/src/arm/imx35-eukrea-cpuimx35.dtsi b/src/arm/imx35-eukrea-cpuimx35.dtsi
deleted file mode 100644
index 9c2b715ab8bf..000000000000
--- a/src/arm/imx35-eukrea-cpuimx35.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "imx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,cpuimx35", "fsl,imx35";
-
-	memory {
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio3 2 0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <0x2 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x48>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
-				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
-				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX35_PAD_FEC_COL__FEC_COL		0x80000000
-				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
-				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
-				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
-				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
-				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
-				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
-				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
-				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
-				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
-				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
-				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
-				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
-			>;
-		};
-
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts b/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
deleted file mode 100644
index 75b036700d31..000000000000
--- a/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx35-eukrea-cpuimx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bp1>;
-
-		bp1 {
-			label = "BP1";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led1>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx35-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 24>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
-				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
-				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
-				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
-			>;
-		};
-
-		pinctrl_bp1: bp1grp {
-			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
-			>;
-		};
-
-		pinctrl_led1: led1grp {
-			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
-			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
-				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
-				MX35_PAD_RTS2__UART2_RTS		0x1c5
-				MX35_PAD_CTS2__UART2_CTS		0x1c5
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/src/arm/imx35-pdk.dts b/src/arm/imx35-pdk.dts
deleted file mode 100644
index 8d715523708f..000000000000
--- a/src/arm/imx35-pdk.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx35.dtsi"
-
-/ {
-	model = "Freescale i.MX35 Product Development Kit";
-	compatible = "fsl,imx35-pdk", "fsl,imx35";
-
-	memory {
-		reg = <0x80000000 0x8000000>,
-		      <0x90000000 0x8000000>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx35-pdk {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <16>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
diff --git a/src/arm/imx35-pinfunc.h b/src/arm/imx35-pinfunc.h
deleted file mode 100644
index 4911f2c405fa..000000000000
--- a/src/arm/imx35-pinfunc.h
+++ /dev/null
@@ -1,970 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX35_PINFUNC_H
-#define __DTS_IMX35_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX35_PAD_CAPTURE__GPT_CAPIN1				0x004 0x328 0x000 0x0 0x0
-#define MX35_PAD_CAPTURE__GPT_CMPOUT2				0x004 0x328 0x000 0x1 0x0
-#define MX35_PAD_CAPTURE__CSPI2_SS1				0x004 0x328 0x7f4 0x2 0x0
-#define MX35_PAD_CAPTURE__EPIT1_EPITO				0x004 0x328 0x000 0x3 0x0
-#define MX35_PAD_CAPTURE__CCM_CLK32K				0x004 0x328 0x7d0 0x4 0x0
-#define MX35_PAD_CAPTURE__GPIO1_4				0x004 0x328 0x850 0x5 0x0
-#define MX35_PAD_COMPARE__GPT_CMPOUT1				0x008 0x32c 0x000 0x0 0x0
-#define MX35_PAD_COMPARE__GPT_CAPIN2				0x008 0x32c 0x000 0x1 0x0
-#define MX35_PAD_COMPARE__GPT_CMPOUT3				0x008 0x32c 0x000 0x2 0x0
-#define MX35_PAD_COMPARE__EPIT2_EPITO				0x008 0x32c 0x000 0x3 0x0
-#define MX35_PAD_COMPARE__GPIO1_5				0x008 0x32c 0x854 0x5 0x0
-#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				0x008 0x32c 0x000 0x7 0x0
-#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				0x00c 0x330 0x000 0x0 0x0
-#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			0x00c 0x330 0x000 0x3 0x0
-#define MX35_PAD_WDOG_RST__GPIO1_6				0x00c 0x330 0x858 0x5 0x0
-#define MX35_PAD_GPIO1_0__GPIO1_0				0x010 0x334 0x82c 0x0 0x0
-#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				0x010 0x334 0x7d4 0x1 0x0
-#define MX35_PAD_GPIO1_0__OWIRE_LINE				0x010 0x334 0x990 0x2 0x0
-#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				0x010 0x334 0x000 0x7 0x0
-#define MX35_PAD_GPIO1_1__GPIO1_1				0x014 0x338 0x838 0x0 0x0
-#define MX35_PAD_GPIO1_1__PWM_PWMO				0x014 0x338 0x000 0x2 0x0
-#define MX35_PAD_GPIO1_1__CSPI1_SS2				0x014 0x338 0x7d8 0x3 0x0
-#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			0x014 0x338 0x000 0x6 0x0
-#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				0x014 0x338 0x000 0x7 0x0
-#define MX35_PAD_GPIO2_0__GPIO2_0				0x018 0x33c 0x868 0x0 0x0
-#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			0x018 0x33c 0x000 0x1 0x0
-#define MX35_PAD_GPIO3_0__GPIO3_0				0x01c 0x340 0x8e8 0x0 0x0
-#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			0x01c 0x340 0x000 0x1 0x0
-#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			0x000 0x344 0x000 0x0 0x0
-#define MX35_PAD_POR_B__CCM_POR_B				0x000 0x348 0x000 0x0 0x0
-#define MX35_PAD_CLKO__CCM_CLKO					0x020 0x34c 0x000 0x0 0x0
-#define MX35_PAD_CLKO__GPIO1_8					0x020 0x34c 0x860 0x5 0x0
-#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			0x000 0x350 0x000 0x0 0x0
-#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			0x000 0x354 0x000 0x0 0x0
-#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			0x000 0x358 0x000 0x0 0x0
-#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			0x000 0x35c 0x000 0x0 0x0
-#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		0x000 0x360 0x000 0x0 0x0
-#define MX35_PAD_VSTBY__CCM_VSTBY				0x024 0x364 0x000 0x0 0x0
-#define MX35_PAD_VSTBY__GPIO1_7					0x024 0x364 0x85c 0x5 0x0
-#define MX35_PAD_A0__EMI_EIM_DA_L_0				0x028 0x368 0x000 0x0 0x0
-#define MX35_PAD_A1__EMI_EIM_DA_L_1				0x02c 0x36c 0x000 0x0 0x0
-#define MX35_PAD_A2__EMI_EIM_DA_L_2				0x030 0x370 0x000 0x0 0x0
-#define MX35_PAD_A3__EMI_EIM_DA_L_3				0x034 0x374 0x000 0x0 0x0
-#define MX35_PAD_A4__EMI_EIM_DA_L_4				0x038 0x378 0x000 0x0 0x0
-#define MX35_PAD_A5__EMI_EIM_DA_L_5				0x03c 0x37c 0x000 0x0 0x0
-#define MX35_PAD_A6__EMI_EIM_DA_L_6				0x040 0x380 0x000 0x0 0x0
-#define MX35_PAD_A7__EMI_EIM_DA_L_7				0x044 0x384 0x000 0x0 0x0
-#define MX35_PAD_A8__EMI_EIM_DA_H_8				0x048 0x388 0x000 0x0 0x0
-#define MX35_PAD_A9__EMI_EIM_DA_H_9				0x04c 0x38c 0x000 0x0 0x0
-#define MX35_PAD_A10__EMI_EIM_DA_H_10				0x050 0x390 0x000 0x0 0x0
-#define MX35_PAD_MA10__EMI_MA10					0x054 0x394 0x000 0x0 0x0
-#define MX35_PAD_A11__EMI_EIM_DA_H_11				0x058 0x398 0x000 0x0 0x0
-#define MX35_PAD_A12__EMI_EIM_DA_H_12				0x05c 0x39c 0x000 0x0 0x0
-#define MX35_PAD_A13__EMI_EIM_DA_H_13				0x060 0x3a0 0x000 0x0 0x0
-#define MX35_PAD_A14__EMI_EIM_DA_H2_14				0x064 0x3a4 0x000 0x0 0x0
-#define MX35_PAD_A15__EMI_EIM_DA_H2_15				0x068 0x3a8 0x000 0x0 0x0
-#define MX35_PAD_A16__EMI_EIM_A_16				0x06c 0x3ac 0x000 0x0 0x0
-#define MX35_PAD_A17__EMI_EIM_A_17				0x070 0x3b0 0x000 0x0 0x0
-#define MX35_PAD_A18__EMI_EIM_A_18				0x074 0x3b4 0x000 0x0 0x0
-#define MX35_PAD_A19__EMI_EIM_A_19				0x078 0x3b8 0x000 0x0 0x0
-#define MX35_PAD_A20__EMI_EIM_A_20				0x07c 0x3bc 0x000 0x0 0x0
-#define MX35_PAD_A21__EMI_EIM_A_21				0x080 0x3c0 0x000 0x0 0x0
-#define MX35_PAD_A22__EMI_EIM_A_22				0x084 0x3c4 0x000 0x0 0x0
-#define MX35_PAD_A23__EMI_EIM_A_23				0x088 0x3c8 0x000 0x0 0x0
-#define MX35_PAD_A24__EMI_EIM_A_24				0x08c 0x3cc 0x000 0x0 0x0
-#define MX35_PAD_A25__EMI_EIM_A_25				0x090 0x3d0 0x000 0x0 0x0
-#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				0x000 0x3d4 0x000 0x0 0x0
-#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				0x000 0x3d8 0x000 0x0 0x0
-#define MX35_PAD_SD0__EMI_DRAM_D_0				0x000 0x3dc 0x000 0x0 0x0
-#define MX35_PAD_SD1__EMI_DRAM_D_1				0x000 0x3e0 0x000 0x0 0x0
-#define MX35_PAD_SD2__EMI_DRAM_D_2				0x000 0x3e4 0x000 0x0 0x0
-#define MX35_PAD_SD3__EMI_DRAM_D_3				0x000 0x3e8 0x000 0x0 0x0
-#define MX35_PAD_SD4__EMI_DRAM_D_4				0x000 0x3ec 0x000 0x0 0x0
-#define MX35_PAD_SD5__EMI_DRAM_D_5				0x000 0x3f0 0x000 0x0 0x0
-#define MX35_PAD_SD6__EMI_DRAM_D_6				0x000 0x3f4 0x000 0x0 0x0
-#define MX35_PAD_SD7__EMI_DRAM_D_7				0x000 0x3f8 0x000 0x0 0x0
-#define MX35_PAD_SD8__EMI_DRAM_D_8				0x000 0x3fc 0x000 0x0 0x0
-#define MX35_PAD_SD9__EMI_DRAM_D_9				0x000 0x400 0x000 0x0 0x0
-#define MX35_PAD_SD10__EMI_DRAM_D_10				0x000 0x404 0x000 0x0 0x0
-#define MX35_PAD_SD11__EMI_DRAM_D_11				0x000 0x408 0x000 0x0 0x0
-#define MX35_PAD_SD12__EMI_DRAM_D_12				0x000 0x40c 0x000 0x0 0x0
-#define MX35_PAD_SD13__EMI_DRAM_D_13				0x000 0x410 0x000 0x0 0x0
-#define MX35_PAD_SD14__EMI_DRAM_D_14				0x000 0x414 0x000 0x0 0x0
-#define MX35_PAD_SD15__EMI_DRAM_D_15				0x000 0x418 0x000 0x0 0x0
-#define MX35_PAD_SD16__EMI_DRAM_D_16				0x000 0x41c 0x000 0x0 0x0
-#define MX35_PAD_SD17__EMI_DRAM_D_17				0x000 0x420 0x000 0x0 0x0
-#define MX35_PAD_SD18__EMI_DRAM_D_18				0x000 0x424 0x000 0x0 0x0
-#define MX35_PAD_SD19__EMI_DRAM_D_19				0x000 0x428 0x000 0x0 0x0
-#define MX35_PAD_SD20__EMI_DRAM_D_20				0x000 0x42c 0x000 0x0 0x0
-#define MX35_PAD_SD21__EMI_DRAM_D_21				0x000 0x430 0x000 0x0 0x0
-#define MX35_PAD_SD22__EMI_DRAM_D_22				0x000 0x434 0x000 0x0 0x0
-#define MX35_PAD_SD23__EMI_DRAM_D_23				0x000 0x438 0x000 0x0 0x0
-#define MX35_PAD_SD24__EMI_DRAM_D_24				0x000 0x43c 0x000 0x0 0x0
-#define MX35_PAD_SD25__EMI_DRAM_D_25				0x000 0x440 0x000 0x0 0x0
-#define MX35_PAD_SD26__EMI_DRAM_D_26				0x000 0x444 0x000 0x0 0x0
-#define MX35_PAD_SD27__EMI_DRAM_D_27				0x000 0x448 0x000 0x0 0x0
-#define MX35_PAD_SD28__EMI_DRAM_D_28				0x000 0x44c 0x000 0x0 0x0
-#define MX35_PAD_SD29__EMI_DRAM_D_29				0x000 0x450 0x000 0x0 0x0
-#define MX35_PAD_SD30__EMI_DRAM_D_30				0x000 0x454 0x000 0x0 0x0
-#define MX35_PAD_SD31__EMI_DRAM_D_31				0x000 0x458 0x000 0x0 0x0
-#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				0x000 0x45c 0x000 0x0 0x0
-#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				0x000 0x460 0x000 0x0 0x0
-#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				0x000 0x464 0x000 0x0 0x0
-#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				0x000 0x468 0x000 0x0 0x0
-#define MX35_PAD_EB0__EMI_EIM_EB0_B				0x094 0x46c 0x000 0x0 0x0
-#define MX35_PAD_EB1__EMI_EIM_EB1_B				0x098 0x470 0x000 0x0 0x0
-#define MX35_PAD_OE__EMI_EIM_OE					0x09c 0x474 0x000 0x0 0x0
-#define MX35_PAD_CS0__EMI_EIM_CS0				0x0a0 0x478 0x000 0x0 0x0
-#define MX35_PAD_CS1__EMI_EIM_CS1				0x0a4 0x47c 0x000 0x0 0x0
-#define MX35_PAD_CS1__EMI_NANDF_CE3				0x0a4 0x47c 0x000 0x3 0x0
-#define MX35_PAD_CS2__EMI_EIM_CS2				0x0a8 0x480 0x000 0x0 0x0
-#define MX35_PAD_CS3__EMI_EIM_CS3				0x0ac 0x484 0x000 0x0 0x0
-#define MX35_PAD_CS4__EMI_EIM_CS4				0x0b0 0x488 0x000 0x0 0x0
-#define MX35_PAD_CS4__EMI_DTACK_B				0x0b0 0x488 0x800 0x1 0x0
-#define MX35_PAD_CS4__EMI_NANDF_CE1				0x0b0 0x488 0x000 0x3 0x0
-#define MX35_PAD_CS4__GPIO1_20					0x0b0 0x488 0x83c 0x5 0x0
-#define MX35_PAD_CS5__EMI_EIM_CS5				0x0b4 0x48c 0x000 0x0 0x0
-#define MX35_PAD_CS5__CSPI2_SS2					0x0b4 0x48c 0x7f8 0x1 0x0
-#define MX35_PAD_CS5__CSPI1_SS2					0x0b4 0x48c 0x7d8 0x2 0x1
-#define MX35_PAD_CS5__EMI_NANDF_CE2				0x0b4 0x48c 0x000 0x3 0x0
-#define MX35_PAD_CS5__GPIO1_21					0x0b4 0x48c 0x840 0x5 0x0
-#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				0x0b8 0x490 0x000 0x0 0x0
-#define MX35_PAD_NF_CE0__GPIO1_22				0x0b8 0x490 0x844 0x5 0x0
-#define MX35_PAD_ECB__EMI_EIM_ECB				0x000 0x494 0x000 0x0 0x0
-#define MX35_PAD_LBA__EMI_EIM_LBA				0x0bc 0x498 0x000 0x0 0x0
-#define MX35_PAD_BCLK__EMI_EIM_BCLK				0x0c0 0x49c 0x000 0x0 0x0
-#define MX35_PAD_RW__EMI_EIM_RW					0x0c4 0x4a0 0x000 0x0 0x0
-#define MX35_PAD_RAS__EMI_DRAM_RAS				0x000 0x4a4 0x000 0x0 0x0
-#define MX35_PAD_CAS__EMI_DRAM_CAS				0x000 0x4a8 0x000 0x0 0x0
-#define MX35_PAD_SDWE__EMI_DRAM_SDWE				0x000 0x4ac 0x000 0x0 0x0
-#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			0x000 0x4b0 0x000 0x0 0x0
-#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			0x000 0x4b4 0x000 0x0 0x0
-#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				0x000 0x4b8 0x000 0x0 0x0
-#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				0x000 0x4bc 0x000 0x0 0x0
-#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				0x000 0x4c0 0x000 0x0 0x0
-#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				0x000 0x4c4 0x000 0x0 0x0
-#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				0x000 0x4c8 0x000 0x0 0x0
-#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				0x0c8 0x4cc 0x000 0x0 0x0
-#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			0x0c8 0x4cc 0x9d8 0x1 0x0
-#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			0x0c8 0x4cc 0x924 0x2 0x0
-#define MX35_PAD_NFWE_B__GPIO2_18				0x0c8 0x4cc 0x88c 0x5 0x0
-#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			0x0c8 0x4cc 0x000 0x7 0x0
-#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				0x0cc 0x4d0 0x000 0x0 0x0
-#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			0x0cc 0x4d0 0x9ec 0x1 0x0
-#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				0x0cc 0x4d0 0x000 0x2 0x0
-#define MX35_PAD_NFRE_B__GPIO2_19				0x0cc 0x4d0 0x890 0x5 0x0
-#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			0x0cc 0x4d0 0x000 0x7 0x0
-#define MX35_PAD_NFALE__EMI_NANDF_ALE				0x0d0 0x4d4 0x000 0x0 0x0
-#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			0x0d0 0x4d4 0x000 0x1 0x0
-#define MX35_PAD_NFALE__IPU_DISPB_CS0				0x0d0 0x4d4 0x000 0x2 0x0
-#define MX35_PAD_NFALE__GPIO2_20				0x0d0 0x4d4 0x898 0x5 0x0
-#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			0x0d0 0x4d4 0x000 0x7 0x0
-#define MX35_PAD_NFCLE__EMI_NANDF_CLE				0x0d4 0x4d8 0x000 0x0 0x0
-#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			0x0d4 0x4d8 0x9f0 0x1 0x0
-#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			0x0d4 0x4d8 0x000 0x2 0x0
-#define MX35_PAD_NFCLE__GPIO2_21				0x0d4 0x4d8 0x89c 0x5 0x0
-#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			0x0d4 0x4d8 0x000 0x7 0x0
-#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				0x0d8 0x4dc 0x000 0x0 0x0
-#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			0x0d8 0x4dc 0x9e8 0x1 0x0
-#define MX35_PAD_NFWP_B__IPU_DISPB_WR				0x0d8 0x4dc 0x000 0x2 0x0
-#define MX35_PAD_NFWP_B__GPIO2_22				0x0d8 0x4dc 0x8a0 0x5 0x0
-#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			0x0d8 0x4dc 0x000 0x7 0x0
-#define MX35_PAD_NFRB__EMI_NANDF_RB				0x0dc 0x4e0 0x000 0x0 0x0
-#define MX35_PAD_NFRB__IPU_DISPB_RD				0x0dc 0x4e0 0x000 0x2 0x0
-#define MX35_PAD_NFRB__GPIO2_23					0x0dc 0x4e0 0x8a4 0x5 0x0
-#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				0x0dc 0x4e0 0x000 0x7 0x0
-#define MX35_PAD_D15__EMI_EIM_D_15				0x000 0x4e4 0x000 0x0 0x0
-#define MX35_PAD_D14__EMI_EIM_D_14				0x000 0x4e8 0x000 0x0 0x0
-#define MX35_PAD_D13__EMI_EIM_D_13				0x000 0x4ec 0x000 0x0 0x0
-#define MX35_PAD_D12__EMI_EIM_D_12				0x000 0x4f0 0x000 0x0 0x0
-#define MX35_PAD_D11__EMI_EIM_D_11				0x000 0x4f4 0x000 0x0 0x0
-#define MX35_PAD_D10__EMI_EIM_D_10				0x000 0x4f8 0x000 0x0 0x0
-#define MX35_PAD_D9__EMI_EIM_D_9				0x000 0x4fc 0x000 0x0 0x0
-#define MX35_PAD_D8__EMI_EIM_D_8				0x000 0x500 0x000 0x0 0x0
-#define MX35_PAD_D7__EMI_EIM_D_7				0x000 0x504 0x000 0x0 0x0
-#define MX35_PAD_D6__EMI_EIM_D_6				0x000 0x508 0x000 0x0 0x0
-#define MX35_PAD_D5__EMI_EIM_D_5				0x000 0x50c 0x000 0x0 0x0
-#define MX35_PAD_D4__EMI_EIM_D_4				0x000 0x510 0x000 0x0 0x0
-#define MX35_PAD_D3__EMI_EIM_D_3				0x000 0x514 0x000 0x0 0x0
-#define MX35_PAD_D2__EMI_EIM_D_2				0x000 0x518 0x000 0x0 0x0
-#define MX35_PAD_D1__EMI_EIM_D_1				0x000 0x51c 0x000 0x0 0x0
-#define MX35_PAD_D0__EMI_EIM_D_0				0x000 0x520 0x000 0x0 0x0
-#define MX35_PAD_CSI_D8__IPU_CSI_D_8				0x0e0 0x524 0x000 0x0 0x0
-#define MX35_PAD_CSI_D8__KPP_COL_0				0x0e0 0x524 0x950 0x1 0x0
-#define MX35_PAD_CSI_D8__GPIO1_20				0x0e0 0x524 0x83c 0x5 0x1
-#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			0x0e0 0x524 0x000 0x7 0x0
-#define MX35_PAD_CSI_D9__IPU_CSI_D_9				0x0e4 0x528 0x000 0x0 0x0
-#define MX35_PAD_CSI_D9__KPP_COL_1				0x0e4 0x528 0x954 0x1 0x0
-#define MX35_PAD_CSI_D9__GPIO1_21				0x0e4 0x528 0x840 0x5 0x1
-#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			0x0e4 0x528 0x000 0x7 0x0
-#define MX35_PAD_CSI_D10__IPU_CSI_D_10				0x0e8 0x52c 0x000 0x0 0x0
-#define MX35_PAD_CSI_D10__KPP_COL_2				0x0e8 0x52c 0x958 0x1 0x0
-#define MX35_PAD_CSI_D10__GPIO1_22				0x0e8 0x52c 0x844 0x5 0x1
-#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			0x0e8 0x52c 0x000 0x7 0x0
-#define MX35_PAD_CSI_D11__IPU_CSI_D_11				0x0ec 0x530 0x000 0x0 0x0
-#define MX35_PAD_CSI_D11__KPP_COL_3				0x0ec 0x530 0x95c 0x1 0x0
-#define MX35_PAD_CSI_D11__GPIO1_23				0x0ec 0x530 0x000 0x5 0x0
-#define MX35_PAD_CSI_D12__IPU_CSI_D_12				0x0f0 0x534 0x000 0x0 0x0
-#define MX35_PAD_CSI_D12__KPP_ROW_0				0x0f0 0x534 0x970 0x1 0x0
-#define MX35_PAD_CSI_D12__GPIO1_24				0x0f0 0x534 0x000 0x5 0x0
-#define MX35_PAD_CSI_D13__IPU_CSI_D_13				0x0f4 0x538 0x000 0x0 0x0
-#define MX35_PAD_CSI_D13__KPP_ROW_1				0x0f4 0x538 0x974 0x1 0x0
-#define MX35_PAD_CSI_D13__GPIO1_25				0x0f4 0x538 0x000 0x5 0x0
-#define MX35_PAD_CSI_D14__IPU_CSI_D_14				0x0f8 0x53c 0x000 0x0 0x0
-#define MX35_PAD_CSI_D14__KPP_ROW_2				0x0f8 0x53c 0x978 0x1 0x0
-#define MX35_PAD_CSI_D14__GPIO1_26				0x0f8 0x53c 0x000 0x5 0x0
-#define MX35_PAD_CSI_D15__IPU_CSI_D_15				0x0fc 0x540 0x97c 0x0 0x0
-#define MX35_PAD_CSI_D15__KPP_ROW_3				0x0fc 0x540 0x000 0x1 0x0
-#define MX35_PAD_CSI_D15__GPIO1_27				0x0fc 0x540 0x000 0x5 0x0
-#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				0x100 0x544 0x000 0x0 0x0
-#define MX35_PAD_CSI_MCLK__GPIO1_28				0x100 0x544 0x000 0x5 0x0
-#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			0x104 0x548 0x000 0x0 0x0
-#define MX35_PAD_CSI_VSYNC__GPIO1_29				0x104 0x548 0x000 0x5 0x0
-#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			0x108 0x54c 0x000 0x0 0x0
-#define MX35_PAD_CSI_HSYNC__GPIO1_30				0x108 0x54c 0x000 0x5 0x0
-#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			0x10c 0x550 0x000 0x0 0x0
-#define MX35_PAD_CSI_PIXCLK__GPIO1_31				0x10c 0x550 0x000 0x5 0x0
-#define MX35_PAD_I2C1_CLK__I2C1_SCL				0x110 0x554 0x000 0x0 0x0
-#define MX35_PAD_I2C1_CLK__GPIO2_24				0x110 0x554 0x8a8 0x5 0x0
-#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			0x110 0x554 0x000 0x6 0x0
-#define MX35_PAD_I2C1_DAT__I2C1_SDA				0x114 0x558 0x000 0x0 0x0
-#define MX35_PAD_I2C1_DAT__GPIO2_25				0x114 0x558 0x8ac 0x5 0x0
-#define MX35_PAD_I2C2_CLK__I2C2_SCL				0x118 0x55c 0x000 0x0 0x0
-#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				0x118 0x55c 0x000 0x1 0x0
-#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			0x118 0x55c 0x000 0x2 0x0
-#define MX35_PAD_I2C2_CLK__GPIO2_26				0x118 0x55c 0x8b0 0x5 0x0
-#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		0x118 0x55c 0x000 0x6 0x0
-#define MX35_PAD_I2C2_DAT__I2C2_SDA				0x11c 0x560 0x000 0x0 0x0
-#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				0x11c 0x560 0x7c8 0x1 0x0
-#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			0x11c 0x560 0x9f4 0x2 0x0
-#define MX35_PAD_I2C2_DAT__GPIO2_27				0x11c 0x560 0x8b4 0x5 0x0
-#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		0x11c 0x560 0x000 0x6 0x0
-#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				0x120 0x564 0x000 0x0 0x0
-#define MX35_PAD_STXD4__GPIO2_28				0x120 0x564 0x8b8 0x5 0x0
-#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		0x120 0x564 0x000 0x7 0x0
-#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				0x124 0x568 0x000 0x0 0x0
-#define MX35_PAD_SRXD4__GPIO2_29				0x124 0x568 0x8bc 0x5 0x0
-#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		0x124 0x568 0x000 0x7 0x0
-#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				0x128 0x56c 0x000 0x0 0x0
-#define MX35_PAD_SCK4__GPIO2_30					0x128 0x56c 0x8c4 0x5 0x0
-#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			0x128 0x56c 0x000 0x7 0x0
-#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			0x12c 0x570 0x000 0x0 0x0
-#define MX35_PAD_STXFS4__GPIO2_31				0x12c 0x570 0x8c8 0x5 0x0
-#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		0x12c 0x570 0x000 0x7 0x0
-#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				0x130 0x574 0x000 0x0 0x0
-#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			0x130 0x574 0x000 0x1 0x0
-#define MX35_PAD_STXD5__CSPI2_MOSI				0x130 0x574 0x7ec 0x2 0x0
-#define MX35_PAD_STXD5__GPIO1_0					0x130 0x574 0x82c 0x5 0x1
-#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		0x130 0x574 0x000 0x7 0x0
-#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				0x134 0x578 0x000 0x0 0x0
-#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				0x134 0x578 0x998 0x1 0x0
-#define MX35_PAD_SRXD5__CSPI2_MISO				0x134 0x578 0x7e8 0x2 0x0
-#define MX35_PAD_SRXD5__GPIO1_1					0x134 0x578 0x838 0x5 0x1
-#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		0x134 0x578 0x000 0x7 0x0
-#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				0x138 0x57c 0x000 0x0 0x0
-#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			0x138 0x57c 0x994 0x1 0x0
-#define MX35_PAD_SCK5__CSPI2_SCLK				0x138 0x57c 0x7e0 0x2 0x0
-#define MX35_PAD_SCK5__GPIO1_2					0x138 0x57c 0x848 0x5 0x0
-#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			0x138 0x57c 0x000 0x7 0x0
-#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			0x13c 0x580 0x000 0x0 0x0
-#define MX35_PAD_STXFS5__CSPI2_RDY				0x13c 0x580 0x7e4 0x2 0x0
-#define MX35_PAD_STXFS5__GPIO1_3				0x13c 0x580 0x84c 0x5 0x0
-#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		0x13c 0x580 0x000 0x7 0x0
-#define MX35_PAD_SCKR__ESAI_SCKR				0x140 0x584 0x000 0x0 0x0
-#define MX35_PAD_SCKR__GPIO1_4					0x140 0x584 0x850 0x5 0x1
-#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			0x140 0x584 0x000 0x7 0x0
-#define MX35_PAD_FSR__ESAI_FSR					0x144 0x588 0x000 0x0 0x0
-#define MX35_PAD_FSR__GPIO1_5					0x144 0x588 0x854 0x5 0x1
-#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			0x144 0x588 0x000 0x7 0x0
-#define MX35_PAD_HCKR__ESAI_HCKR				0x148 0x58c 0x000 0x0 0x0
-#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				0x148 0x58c 0x000 0x1 0x0
-#define MX35_PAD_HCKR__CSPI2_SS0				0x148 0x58c 0x7f0 0x2 0x0
-#define MX35_PAD_HCKR__IPU_FLASH_STROBE				0x148 0x58c 0x000 0x3 0x0
-#define MX35_PAD_HCKR__GPIO1_6					0x148 0x58c 0x858 0x5 0x1
-#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			0x148 0x58c 0x000 0x7 0x0
-#define MX35_PAD_SCKT__ESAI_SCKT				0x14c 0x590 0x000 0x0 0x0
-#define MX35_PAD_SCKT__GPIO1_7					0x14c 0x590 0x85c 0x5 0x1
-#define MX35_PAD_SCKT__IPU_CSI_D_0				0x14c 0x590 0x930 0x6 0x0
-#define MX35_PAD_SCKT__KPP_ROW_2				0x14c 0x590 0x978 0x7 0x1
-#define MX35_PAD_FST__ESAI_FST					0x150 0x594 0x000 0x0 0x0
-#define MX35_PAD_FST__GPIO1_8					0x150 0x594 0x860 0x5 0x1
-#define MX35_PAD_FST__IPU_CSI_D_1				0x150 0x594 0x934 0x6 0x0
-#define MX35_PAD_FST__KPP_ROW_3					0x150 0x594 0x97c 0x7 0x1
-#define MX35_PAD_HCKT__ESAI_HCKT				0x154 0x598 0x000 0x0 0x0
-#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				0x154 0x598 0x7a8 0x1 0x0
-#define MX35_PAD_HCKT__GPIO1_9					0x154 0x598 0x864 0x5 0x0
-#define MX35_PAD_HCKT__IPU_CSI_D_2				0x154 0x598 0x938 0x6 0x0
-#define MX35_PAD_HCKT__KPP_COL_3				0x154 0x598 0x95c 0x7 0x1
-#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				0x158 0x59c 0x000 0x0 0x0
-#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			0x158 0x59c 0x000 0x1 0x0
-#define MX35_PAD_TX5_RX0__CSPI2_SS2				0x158 0x59c 0x7f8 0x2 0x1
-#define MX35_PAD_TX5_RX0__CAN2_TXCAN				0x158 0x59c 0x000 0x3 0x0
-#define MX35_PAD_TX5_RX0__UART2_DTR				0x158 0x59c 0x000 0x4 0x0
-#define MX35_PAD_TX5_RX0__GPIO1_10				0x158 0x59c 0x830 0x5 0x0
-#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		0x158 0x59c 0x000 0x7 0x0
-#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				0x15c 0x5a0 0x000 0x0 0x0
-#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			0x15c 0x5a0 0x000 0x1 0x0
-#define MX35_PAD_TX4_RX1__CSPI2_SS3				0x15c 0x5a0 0x7fc 0x2 0x0
-#define MX35_PAD_TX4_RX1__CAN2_RXCAN				0x15c 0x5a0 0x7cc 0x3 0x0
-#define MX35_PAD_TX4_RX1__UART2_DSR				0x15c 0x5a0 0x000 0x4 0x0
-#define MX35_PAD_TX4_RX1__GPIO1_11				0x15c 0x5a0 0x834 0x5 0x0
-#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				0x15c 0x5a0 0x93c 0x6 0x0
-#define MX35_PAD_TX4_RX1__KPP_ROW_0				0x15c 0x5a0 0x970 0x7 0x1
-#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				0x160 0x5a4 0x000 0x0 0x0
-#define MX35_PAD_TX3_RX2__I2C3_SCL				0x160 0x5a4 0x91c 0x1 0x0
-#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				0x160 0x5a4 0x000 0x3 0x0
-#define MX35_PAD_TX3_RX2__GPIO1_12				0x160 0x5a4 0x000 0x5 0x0
-#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				0x160 0x5a4 0x940 0x6 0x0
-#define MX35_PAD_TX3_RX2__KPP_ROW_1				0x160 0x5a4 0x974 0x7 0x1
-#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				0x164 0x5a8 0x000 0x0 0x0
-#define MX35_PAD_TX2_RX3__I2C3_SDA				0x164 0x5a8 0x920 0x1 0x0
-#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				0x164 0x5a8 0x000 0x3 0x0
-#define MX35_PAD_TX2_RX3__GPIO1_13				0x164 0x5a8 0x000 0x5 0x0
-#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				0x164 0x5a8 0x944 0x6 0x0
-#define MX35_PAD_TX2_RX3__KPP_COL_0				0x164 0x5a8 0x950 0x7 0x1
-#define MX35_PAD_TX1__ESAI_TX1					0x168 0x5ac 0x000 0x0 0x0
-#define MX35_PAD_TX1__CCM_PMIC_RDY				0x168 0x5ac 0x7d4 0x1 0x1
-#define MX35_PAD_TX1__CSPI1_SS2					0x168 0x5ac 0x7d8 0x2 0x2
-#define MX35_PAD_TX1__EMI_NANDF_CE3				0x168 0x5ac 0x000 0x3 0x0
-#define MX35_PAD_TX1__UART2_RI					0x168 0x5ac 0x000 0x4 0x0
-#define MX35_PAD_TX1__GPIO1_14					0x168 0x5ac 0x000 0x5 0x0
-#define MX35_PAD_TX1__IPU_CSI_D_6				0x168 0x5ac 0x948 0x6 0x0
-#define MX35_PAD_TX1__KPP_COL_1					0x168 0x5ac 0x954 0x7 0x1
-#define MX35_PAD_TX0__ESAI_TX0					0x16c 0x5b0 0x000 0x0 0x0
-#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			0x16c 0x5b0 0x994 0x1 0x1
-#define MX35_PAD_TX0__CSPI1_SS3					0x16c 0x5b0 0x7dc 0x2 0x0
-#define MX35_PAD_TX0__EMI_DTACK_B				0x16c 0x5b0 0x800 0x3 0x1
-#define MX35_PAD_TX0__UART2_DCD					0x16c 0x5b0 0x000 0x4 0x0
-#define MX35_PAD_TX0__GPIO1_15					0x16c 0x5b0 0x000 0x5 0x0
-#define MX35_PAD_TX0__IPU_CSI_D_7				0x16c 0x5b0 0x94c 0x6 0x0
-#define MX35_PAD_TX0__KPP_COL_2					0x16c 0x5b0 0x958 0x7 0x1
-#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				0x170 0x5b4 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_MOSI__GPIO1_16				0x170 0x5b4 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		0x170 0x5b4 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				0x174 0x5b8 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_MISO__GPIO1_17				0x174 0x5b8 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		0x174 0x5b8 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				0x178 0x5bc 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				0x178 0x5bc 0x990 0x1 0x1
-#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				0x178 0x5bc 0x7fc 0x2 0x1
-#define MX35_PAD_CSPI1_SS0__GPIO1_18				0x178 0x5bc 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			0x178 0x5bc 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				0x17c 0x5c0 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SS1__PWM_PWMO				0x17c 0x5c0 0x000 0x1 0x0
-#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				0x17c 0x5c0 0x7d0 0x2 0x1
-#define MX35_PAD_CSPI1_SS1__GPIO1_19				0x17c 0x5c0 0x000 0x5 0x0
-#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			0x17c 0x5c0 0x000 0x6 0x0
-#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			0x17c 0x5c0 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				0x180 0x5c4 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SCLK__GPIO3_4				0x180 0x5c4 0x904 0x5 0x0
-#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			0x180 0x5c4 0x000 0x6 0x0
-#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		0x180 0x5c4 0x000 0x7 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			0x184 0x5c8 0x000 0x0 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				0x184 0x5c8 0x908 0x5 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			0x184 0x5c8 0x000 0x6 0x0
-#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	0x184 0x5c8 0x000 0x7 0x0
-#define MX35_PAD_RXD1__UART1_RXD_MUX				0x188 0x5cc 0x000 0x0 0x0
-#define MX35_PAD_RXD1__CSPI2_MOSI				0x188 0x5cc 0x7ec 0x1 0x1
-#define MX35_PAD_RXD1__KPP_COL_4				0x188 0x5cc 0x960 0x4 0x0
-#define MX35_PAD_RXD1__GPIO3_6					0x188 0x5cc 0x90c 0x5 0x0
-#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			0x188 0x5cc 0x000 0x7 0x0
-#define MX35_PAD_TXD1__UART1_TXD_MUX				0x18c 0x5d0 0x000 0x0 0x0
-#define MX35_PAD_TXD1__CSPI2_MISO				0x18c 0x5d0 0x7e8 0x1 0x1
-#define MX35_PAD_TXD1__KPP_COL_5				0x18c 0x5d0 0x964 0x4 0x0
-#define MX35_PAD_TXD1__GPIO3_7					0x18c 0x5d0 0x910 0x5 0x0
-#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			0x18c 0x5d0 0x000 0x7 0x0
-#define MX35_PAD_RTS1__UART1_RTS				0x190 0x5d4 0x000 0x0 0x0
-#define MX35_PAD_RTS1__CSPI2_SCLK				0x190 0x5d4 0x7e0 0x1 0x1
-#define MX35_PAD_RTS1__I2C3_SCL					0x190 0x5d4 0x91c 0x2 0x1
-#define MX35_PAD_RTS1__IPU_CSI_D_0				0x190 0x5d4 0x930 0x3 0x1
-#define MX35_PAD_RTS1__KPP_COL_6				0x190 0x5d4 0x968 0x4 0x0
-#define MX35_PAD_RTS1__GPIO3_8					0x190 0x5d4 0x914 0x5 0x0
-#define MX35_PAD_RTS1__EMI_NANDF_CE1				0x190 0x5d4 0x000 0x6 0x0
-#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			0x190 0x5d4 0x000 0x7 0x0
-#define MX35_PAD_CTS1__UART1_CTS				0x194 0x5d8 0x000 0x0 0x0
-#define MX35_PAD_CTS1__CSPI2_RDY				0x194 0x5d8 0x7e4 0x1 0x1
-#define MX35_PAD_CTS1__I2C3_SDA					0x194 0x5d8 0x920 0x2 0x1
-#define MX35_PAD_CTS1__IPU_CSI_D_1				0x194 0x5d8 0x934 0x3 0x1
-#define MX35_PAD_CTS1__KPP_COL_7				0x194 0x5d8 0x96c 0x4 0x0
-#define MX35_PAD_CTS1__GPIO3_9					0x194 0x5d8 0x918 0x5 0x0
-#define MX35_PAD_CTS1__EMI_NANDF_CE2				0x194 0x5d8 0x000 0x6 0x0
-#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			0x194 0x5d8 0x000 0x7 0x0
-#define MX35_PAD_RXD2__UART2_RXD_MUX				0x198 0x5dc 0x000 0x0 0x0
-#define MX35_PAD_RXD2__KPP_ROW_4				0x198 0x5dc 0x980 0x4 0x0
-#define MX35_PAD_RXD2__GPIO3_10					0x198 0x5dc 0x8ec 0x5 0x0
-#define MX35_PAD_TXD2__UART2_TXD_MUX				0x19c 0x5e0 0x000 0x0 0x0
-#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			0x19c 0x5e0 0x994 0x1 0x2
-#define MX35_PAD_TXD2__KPP_ROW_5				0x19c 0x5e0 0x984 0x4 0x0
-#define MX35_PAD_TXD2__GPIO3_11					0x19c 0x5e0 0x8f0 0x5 0x0
-#define MX35_PAD_RTS2__UART2_RTS				0x1a0 0x5e4 0x000 0x0 0x0
-#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				0x1a0 0x5e4 0x998 0x1 0x1
-#define MX35_PAD_RTS2__CAN2_RXCAN				0x1a0 0x5e4 0x7cc 0x2 0x1
-#define MX35_PAD_RTS2__IPU_CSI_D_2				0x1a0 0x5e4 0x938 0x3 0x1
-#define MX35_PAD_RTS2__KPP_ROW_6				0x1a0 0x5e4 0x988 0x4 0x0
-#define MX35_PAD_RTS2__GPIO3_12					0x1a0 0x5e4 0x8f4 0x5 0x0
-#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				0x1a0 0x5e4 0x000 0x6 0x0
-#define MX35_PAD_RTS2__UART3_RXD_MUX				0x1a0 0x5e4 0x9a0 0x7 0x0
-#define MX35_PAD_CTS2__UART2_CTS				0x1a4 0x5e8 0x000 0x0 0x0
-#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				0x1a4 0x5e8 0x000 0x1 0x0
-#define MX35_PAD_CTS2__CAN2_TXCAN				0x1a4 0x5e8 0x000 0x2 0x0
-#define MX35_PAD_CTS2__IPU_CSI_D_3				0x1a4 0x5e8 0x93c 0x3 0x1
-#define MX35_PAD_CTS2__KPP_ROW_7				0x1a4 0x5e8 0x98c 0x4 0x0
-#define MX35_PAD_CTS2__GPIO3_13					0x1a4 0x5e8 0x8f8 0x5 0x0
-#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				0x1a4 0x5e8 0x000 0x6 0x0
-#define MX35_PAD_CTS2__UART3_TXD_MUX				0x1a4 0x5e8 0x000 0x7 0x0
-#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				0x000 0x5ec 0x000 0x0 0x0
-#define MX35_PAD_TCK__SJC_TCK					0x000 0x5f0 0x000 0x0 0x0
-#define MX35_PAD_TMS__SJC_TMS					0x000 0x5f4 0x000 0x0 0x0
-#define MX35_PAD_TDI__SJC_TDI					0x000 0x5f8 0x000 0x0 0x0
-#define MX35_PAD_TDO__SJC_TDO					0x000 0x5fc 0x000 0x0 0x0
-#define MX35_PAD_TRSTB__SJC_TRSTB				0x000 0x600 0x000 0x0 0x0
-#define MX35_PAD_DE_B__SJC_DE_B					0x000 0x604 0x000 0x0 0x0
-#define MX35_PAD_SJC_MOD__SJC_MOD				0x000 0x608 0x000 0x0 0x0
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			0x1a8 0x60c 0x000 0x0 0x0
-#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			0x1a8 0x60c 0x000 0x1 0x0
-#define MX35_PAD_USBOTG_PWR__GPIO3_14				0x1a8 0x60c 0x8fc 0x5 0x0
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			0x1ac 0x610 0x000 0x0 0x0
-#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			0x1ac 0x610 0x9f4 0x1 0x1
-#define MX35_PAD_USBOTG_OC__GPIO3_15				0x1ac 0x610 0x900 0x5 0x0
-#define MX35_PAD_LD0__IPU_DISPB_DAT_0				0x1b0 0x614 0x000 0x0 0x0
-#define MX35_PAD_LD0__GPIO2_0					0x1b0 0x614 0x868 0x5 0x1
-#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			0x1b0 0x614 0x000 0x6 0x0
-#define MX35_PAD_LD1__IPU_DISPB_DAT_1				0x1b4 0x618 0x000 0x0 0x0
-#define MX35_PAD_LD1__GPIO2_1					0x1b4 0x618 0x894 0x5 0x0
-#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			0x1b4 0x618 0x000 0x6 0x0
-#define MX35_PAD_LD2__IPU_DISPB_DAT_2				0x1b8 0x61c 0x000 0x0 0x0
-#define MX35_PAD_LD2__GPIO2_2					0x1b8 0x61c 0x8c0 0x5 0x0
-#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			0x1b8 0x61c 0x000 0x6 0x0
-#define MX35_PAD_LD3__IPU_DISPB_DAT_3				0x1bc 0x620 0x000 0x0 0x0
-#define MX35_PAD_LD3__GPIO2_3					0x1bc 0x620 0x8cc 0x5 0x0
-#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			0x1bc 0x620 0x000 0x6 0x0
-#define MX35_PAD_LD4__IPU_DISPB_DAT_4				0x1c0 0x624 0x000 0x0 0x0
-#define MX35_PAD_LD4__GPIO2_4					0x1c0 0x624 0x8d0 0x5 0x0
-#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			0x1c0 0x624 0x000 0x6 0x0
-#define MX35_PAD_LD5__IPU_DISPB_DAT_5				0x1c4 0x628 0x000 0x0 0x0
-#define MX35_PAD_LD5__GPIO2_5					0x1c4 0x628 0x8d4 0x5 0x0
-#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			0x1c4 0x628 0x000 0x6 0x0
-#define MX35_PAD_LD6__IPU_DISPB_DAT_6				0x1c8 0x62c 0x000 0x0 0x0
-#define MX35_PAD_LD6__GPIO2_6					0x1c8 0x62c 0x8d8 0x5 0x0
-#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			0x1c8 0x62c 0x000 0x6 0x0
-#define MX35_PAD_LD7__IPU_DISPB_DAT_7				0x1cc 0x630 0x000 0x0 0x0
-#define MX35_PAD_LD7__GPIO2_7					0x1cc 0x630 0x8dc 0x5 0x0
-#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			0x1cc 0x630 0x000 0x6 0x0
-#define MX35_PAD_LD8__IPU_DISPB_DAT_8				0x1d0 0x634 0x000 0x0 0x0
-#define MX35_PAD_LD8__GPIO2_8					0x1d0 0x634 0x8e0 0x5 0x0
-#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			0x1d0 0x634 0x000 0x6 0x0
-#define MX35_PAD_LD9__IPU_DISPB_DAT_9				0x1d4 0x638 0x000 0x0 0x0
-#define MX35_PAD_LD9__GPIO2_9					0x1d4 0x638 0x8e4 0x5 0x0
-#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			0x1d4 0x638 0x000 0x6 0x0
-#define MX35_PAD_LD10__IPU_DISPB_DAT_10				0x1d8 0x63c 0x000 0x0 0x0
-#define MX35_PAD_LD10__GPIO2_10					0x1d8 0x63c 0x86c 0x5 0x0
-#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			0x1d8 0x63c 0x000 0x6 0x0
-#define MX35_PAD_LD11__IPU_DISPB_DAT_11				0x1dc 0x640 0x000 0x0 0x0
-#define MX35_PAD_LD11__GPIO2_11					0x1dc 0x640 0x870 0x5 0x0
-#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			0x1dc 0x640 0x000 0x6 0x0
-#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			0x1dc 0x640 0x000 0x7 0x0
-#define MX35_PAD_LD12__IPU_DISPB_DAT_12				0x1e0 0x644 0x000 0x0 0x0
-#define MX35_PAD_LD12__GPIO2_12					0x1e0 0x644 0x874 0x5 0x0
-#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			0x1e0 0x644 0x000 0x6 0x0
-#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			0x1e0 0x644 0x000 0x7 0x0
-#define MX35_PAD_LD13__IPU_DISPB_DAT_13				0x1e4 0x648 0x000 0x0 0x0
-#define MX35_PAD_LD13__GPIO2_13					0x1e4 0x648 0x878 0x5 0x0
-#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			0x1e4 0x648 0x000 0x6 0x0
-#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			0x1e4 0x648 0x000 0x7 0x0
-#define MX35_PAD_LD14__IPU_DISPB_DAT_14				0x1e8 0x64c 0x000 0x0 0x0
-#define MX35_PAD_LD14__GPIO2_14					0x1e8 0x64c 0x87c 0x5 0x0
-#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		0x1e8 0x64c 0x000 0x6 0x0
-#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			0x1e8 0x64c 0x000 0x7 0x0
-#define MX35_PAD_LD15__IPU_DISPB_DAT_15				0x1ec 0x650 0x000 0x0 0x0
-#define MX35_PAD_LD15__GPIO2_15					0x1ec 0x650 0x880 0x5 0x0
-#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		0x1ec 0x650 0x000 0x6 0x0
-#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			0x1ec 0x650 0x000 0x7 0x0
-#define MX35_PAD_LD16__IPU_DISPB_DAT_16				0x1f0 0x654 0x000 0x0 0x0
-#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			0x1f0 0x654 0x928 0x2 0x0
-#define MX35_PAD_LD16__GPIO2_16					0x1f0 0x654 0x884 0x5 0x0
-#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		0x1f0 0x654 0x000 0x6 0x0
-#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			0x1f0 0x654 0x000 0x7 0x0
-#define MX35_PAD_LD17__IPU_DISPB_DAT_17				0x1f4 0x658 0x000 0x0 0x0
-#define MX35_PAD_LD17__IPU_DISPB_CS2				0x1f4 0x658 0x000 0x2 0x0
-#define MX35_PAD_LD17__GPIO2_17					0x1f4 0x658 0x888 0x5 0x0
-#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		0x1f4 0x658 0x000 0x6 0x0
-#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			0x1f4 0x658 0x000 0x7 0x0
-#define MX35_PAD_LD18__IPU_DISPB_DAT_18				0x1f8 0x65c 0x000 0x0 0x0
-#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			0x1f8 0x65c 0x924 0x1 0x1
-#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			0x1f8 0x65c 0x928 0x2 0x1
-#define MX35_PAD_LD18__ESDHC3_CMD				0x1f8 0x65c 0x818 0x3 0x0
-#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			0x1f8 0x65c 0x9b0 0x4 0x0
-#define MX35_PAD_LD18__GPIO3_24					0x1f8 0x65c 0x000 0x5 0x0
-#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		0x1f8 0x65c 0x000 0x6 0x0
-#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			0x1f8 0x65c 0x000 0x7 0x0
-#define MX35_PAD_LD19__IPU_DISPB_DAT_19				0x1fc 0x660 0x000 0x0 0x0
-#define MX35_PAD_LD19__IPU_DISPB_BCLK				0x1fc 0x660 0x000 0x1 0x0
-#define MX35_PAD_LD19__IPU_DISPB_CS1				0x1fc 0x660 0x000 0x2 0x0
-#define MX35_PAD_LD19__ESDHC3_CLK				0x1fc 0x660 0x814 0x3 0x0
-#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			0x1fc 0x660 0x9c4 0x4 0x0
-#define MX35_PAD_LD19__GPIO3_25					0x1fc 0x660 0x000 0x5 0x0
-#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		0x1fc 0x660 0x000 0x6 0x0
-#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			0x1fc 0x660 0x000 0x7 0x0
-#define MX35_PAD_LD20__IPU_DISPB_DAT_20				0x200 0x664 0x000 0x0 0x0
-#define MX35_PAD_LD20__IPU_DISPB_CS0				0x200 0x664 0x000 0x1 0x0
-#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				0x200 0x664 0x000 0x2 0x0
-#define MX35_PAD_LD20__ESDHC3_DAT0				0x200 0x664 0x81c 0x3 0x0
-#define MX35_PAD_LD20__GPIO3_26					0x200 0x664 0x000 0x5 0x0
-#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		0x200 0x664 0x000 0x6 0x0
-#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			0x200 0x664 0x000 0x7 0x0
-#define MX35_PAD_LD21__IPU_DISPB_DAT_21				0x204 0x668 0x000 0x0 0x0
-#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				0x204 0x668 0x000 0x1 0x0
-#define MX35_PAD_LD21__IPU_DISPB_SER_RS				0x204 0x668 0x000 0x2 0x0
-#define MX35_PAD_LD21__ESDHC3_DAT1				0x204 0x668 0x820 0x3 0x0
-#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			0x204 0x668 0x000 0x4 0x0
-#define MX35_PAD_LD21__GPIO3_27					0x204 0x668 0x000 0x5 0x0
-#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x204 0x668 0x000 0x6 0x0
-#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			0x204 0x668 0x000 0x7 0x0
-#define MX35_PAD_LD22__IPU_DISPB_DAT_22				0x208 0x66c 0x000 0x0 0x0
-#define MX35_PAD_LD22__IPU_DISPB_WR				0x208 0x66c 0x000 0x1 0x0
-#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				0x208 0x66c 0x92c 0x2 0x0
-#define MX35_PAD_LD22__ESDHC3_DAT2				0x208 0x66c 0x824 0x3 0x0
-#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			0x208 0x66c 0x9c8 0x4 0x0
-#define MX35_PAD_LD22__GPIO3_28					0x208 0x66c 0x000 0x5 0x0
-#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			0x208 0x66c 0x000 0x6 0x0
-#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				0x208 0x66c 0x000 0x7 0x0
-#define MX35_PAD_LD23__IPU_DISPB_DAT_23				0x20c 0x670 0x000 0x0 0x0
-#define MX35_PAD_LD23__IPU_DISPB_RD				0x20c 0x670 0x000 0x1 0x0
-#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			0x20c 0x670 0x92c 0x2 0x1
-#define MX35_PAD_LD23__ESDHC3_DAT3				0x20c 0x670 0x828 0x3 0x0
-#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			0x20c 0x670 0x9c0 0x4 0x0
-#define MX35_PAD_LD23__GPIO3_29					0x20c 0x670 0x000 0x5 0x0
-#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			0x20c 0x670 0x000 0x6 0x0
-#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				0x20c 0x670 0x000 0x7 0x0
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			0x210 0x674 0x000 0x0 0x0
-#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			0x210 0x674 0x92c 0x2 0x2
-#define MX35_PAD_D3_HSYNC__GPIO3_30				0x210 0x674 0x000 0x5 0x0
-#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		0x210 0x674 0x000 0x6 0x0
-#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			0x210 0x674 0x000 0x7 0x0
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			0x214 0x678 0x000 0x0 0x0
-#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			0x214 0x678 0x000 0x2 0x0
-#define MX35_PAD_D3_FPSHIFT__GPIO3_31				0x214 0x678 0x000 0x5 0x0
-#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	0x214 0x678 0x000 0x6 0x0
-#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		0x214 0x678 0x000 0x7 0x0
-#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			0x218 0x67c 0x000 0x0 0x0
-#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			0x218 0x67c 0x000 0x2 0x0
-#define MX35_PAD_D3_DRDY__GPIO1_0				0x218 0x67c 0x82c 0x5 0x2
-#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		0x218 0x67c 0x000 0x6 0x0
-#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			0x218 0x67c 0x000 0x7 0x0
-#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			0x21c 0x680 0x000 0x0 0x0
-#define MX35_PAD_CONTRAST__GPIO1_1				0x21c 0x680 0x838 0x5 0x2
-#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	0x21c 0x680 0x000 0x6 0x0
-#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			0x21c 0x680 0x000 0x7 0x0
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			0x220 0x684 0x000 0x0 0x0
-#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			0x220 0x684 0x000 0x2 0x0
-#define MX35_PAD_D3_VSYNC__GPIO1_2				0x220 0x684 0x848 0x5 0x1
-#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			0x220 0x684 0x000 0x6 0x0
-#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			0x220 0x684 0x000 0x7 0x0
-#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			0x224 0x688 0x000 0x0 0x0
-#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			0x224 0x688 0x000 0x2 0x0
-#define MX35_PAD_D3_REV__GPIO1_3				0x224 0x688 0x84c 0x5 0x1
-#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			0x224 0x688 0x000 0x6 0x0
-#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			0x224 0x688 0x000 0x7 0x0
-#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			0x228 0x68c 0x000 0x0 0x0
-#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				0x228 0x68c 0x000 0x2 0x0
-#define MX35_PAD_D3_CLS__GPIO1_4				0x228 0x68c 0x850 0x5 0x2
-#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		0x228 0x68c 0x000 0x6 0x0
-#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			0x228 0x68c 0x000 0x7 0x0
-#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			0x22c 0x690 0x000 0x0 0x0
-#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			0x22c 0x690 0x928 0x2 0x2
-#define MX35_PAD_D3_SPL__GPIO1_5				0x22c 0x690 0x854 0x5 0x2
-#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		0x22c 0x690 0x000 0x6 0x0
-#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			0x22c 0x690 0x000 0x7 0x0
-#define MX35_PAD_SD1_CMD__ESDHC1_CMD				0x230 0x694 0x000 0x0 0x0
-#define MX35_PAD_SD1_CMD__MSHC_SCLK				0x230 0x694 0x000 0x1 0x0
-#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			0x230 0x694 0x924 0x3 0x2
-#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			0x230 0x694 0x9b4 0x4 0x0
-#define MX35_PAD_SD1_CMD__GPIO1_6				0x230 0x694 0x858 0x5 0x2
-#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			0x230 0x694 0x000 0x7 0x0
-#define MX35_PAD_SD1_CLK__ESDHC1_CLK				0x234 0x698 0x000 0x0 0x0
-#define MX35_PAD_SD1_CLK__MSHC_BS				0x234 0x698 0x000 0x1 0x0
-#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			0x234 0x698 0x000 0x3 0x0
-#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			0x234 0x698 0x9b8 0x4 0x0
-#define MX35_PAD_SD1_CLK__GPIO1_7				0x234 0x698 0x85c 0x5 0x2
-#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			0x234 0x698 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				0x238 0x69c 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				0x238 0x69c 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			0x238 0x69c 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		0x238 0x69c 0x9bc 0x4 0x0
-#define MX35_PAD_SD1_DATA0__GPIO1_8				0x238 0x69c 0x860 0x5 0x2
-#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			0x238 0x69c 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				0x23c 0x6a0 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				0x23c 0x6a0 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			0x23c 0x6a0 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		0x23c 0x6a0 0x9a4 0x4 0x0
-#define MX35_PAD_SD1_DATA1__GPIO1_9				0x23c 0x6a0 0x864 0x5 0x1
-#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			0x23c 0x6a0 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				0x240 0x6a4 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				0x240 0x6a4 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			0x240 0x6a4 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		0x240 0x6a4 0x9a8 0x4 0x0
-#define MX35_PAD_SD1_DATA2__GPIO1_10				0x240 0x6a4 0x830 0x5 0x1
-#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			0x240 0x6a4 0x000 0x7 0x0
-#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				0x244 0x6a8 0x000 0x0 0x0
-#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				0x244 0x6a8 0x000 0x1 0x0
-#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			0x244 0x6a8 0x000 0x3 0x0
-#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		0x244 0x6a8 0x9ac 0x4 0x0
-#define MX35_PAD_SD1_DATA3__GPIO1_11				0x244 0x6a8 0x834 0x5 0x1
-#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			0x244 0x6a8 0x000 0x7 0x0
-#define MX35_PAD_SD2_CMD__ESDHC2_CMD				0x248 0x6ac 0x000 0x0 0x0
-#define MX35_PAD_SD2_CMD__I2C3_SCL				0x248 0x6ac 0x91c 0x1 0x2
-#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				0x248 0x6ac 0x804 0x2 0x0
-#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				0x248 0x6ac 0x938 0x3 0x2
-#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			0x248 0x6ac 0x9dc 0x4 0x0
-#define MX35_PAD_SD2_CMD__GPIO2_0				0x248 0x6ac 0x868 0x5 0x2
-#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			0x248 0x6ac 0x000 0x6 0x0
-#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			0x248 0x6ac 0x928 0x7 0x3
-#define MX35_PAD_SD2_CLK__ESDHC2_CLK				0x24c 0x6b0 0x000 0x0 0x0
-#define MX35_PAD_SD2_CLK__I2C3_SDA				0x24c 0x6b0 0x920 0x1 0x2
-#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				0x24c 0x6b0 0x808 0x2 0x0
-#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				0x24c 0x6b0 0x93c 0x3 0x2
-#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			0x24c 0x6b0 0x9e0 0x4 0x0
-#define MX35_PAD_SD2_CLK__GPIO2_1				0x24c 0x6b0 0x894 0x5 0x1
-#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			0x24c 0x6b0 0x998 0x6 0x2
-#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				0x24c 0x6b0 0x000 0x7 0x0
-#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				0x250 0x6b4 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			0x250 0x6b4 0x9a0 0x1 0x1
-#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				0x250 0x6b4 0x80c 0x2 0x0
-#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				0x250 0x6b4 0x940 0x3 0x1
-#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		0x250 0x6b4 0x9e4 0x4 0x0
-#define MX35_PAD_SD2_DATA0__GPIO2_2				0x250 0x6b4 0x8c0 0x5 0x1
-#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			0x250 0x6b4 0x994 0x6 0x3
-#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				0x254 0x6b8 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			0x254 0x6b8 0x000 0x1 0x0
-#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				0x254 0x6b8 0x810 0x2 0x0
-#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				0x254 0x6b8 0x944 0x3 0x1
-#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		0x254 0x6b8 0x9cc 0x4 0x0
-#define MX35_PAD_SD2_DATA1__GPIO2_3				0x254 0x6b8 0x8cc 0x5 0x1
-#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				0x258 0x6bc 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA2__UART3_RTS				0x258 0x6bc 0x99c 0x1 0x0
-#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				0x258 0x6bc 0x7c8 0x2 0x1
-#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				0x258 0x6bc 0x948 0x3 0x1
-#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		0x258 0x6bc 0x9d0 0x4 0x0
-#define MX35_PAD_SD2_DATA2__GPIO2_4				0x258 0x6bc 0x8d0 0x5 0x1
-#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				0x25c 0x6c0 0x000 0x0 0x0
-#define MX35_PAD_SD2_DATA3__UART3_CTS				0x25c 0x6c0 0x000 0x1 0x0
-#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				0x25c 0x6c0 0x000 0x2 0x0
-#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				0x25c 0x6c0 0x94c 0x3 0x1
-#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		0x25c 0x6c0 0x9d4 0x4 0x0
-#define MX35_PAD_SD2_DATA3__GPIO2_5				0x25c 0x6c0 0x8d4 0x5 0x1
-#define MX35_PAD_ATA_CS0__ATA_CS0				0x260 0x6c4 0x000 0x0 0x0
-#define MX35_PAD_ATA_CS0__CSPI1_SS3				0x260 0x6c4 0x7dc 0x1 0x1
-#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				0x260 0x6c4 0x000 0x3 0x0
-#define MX35_PAD_ATA_CS0__GPIO2_6				0x260 0x6c4 0x8d8 0x5 0x1
-#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				0x260 0x6c4 0x000 0x6 0x0
-#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		0x260 0x6c4 0x000 0x7 0x0
-#define MX35_PAD_ATA_CS1__ATA_CS1				0x264 0x6c8 0x000 0x0 0x0
-#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				0x264 0x6c8 0x000 0x3 0x0
-#define MX35_PAD_ATA_CS1__CSPI2_SS0				0x264 0x6c8 0x7f0 0x4 0x1
-#define MX35_PAD_ATA_CS1__GPIO2_7				0x264 0x6c8 0x8dc 0x5 0x1
-#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				0x264 0x6c8 0x000 0x6 0x0
-#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		0x264 0x6c8 0x000 0x7 0x0
-#define MX35_PAD_ATA_DIOR__ATA_DIOR				0x268 0x6cc 0x000 0x0 0x0
-#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				0x268 0x6cc 0x81c 0x1 0x1
-#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			0x268 0x6cc 0x9c4 0x2 0x1
-#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			0x268 0x6cc 0x000 0x3 0x0
-#define MX35_PAD_ATA_DIOR__CSPI2_SS1				0x268 0x6cc 0x7f4 0x4 0x1
-#define MX35_PAD_ATA_DIOR__GPIO2_8				0x268 0x6cc 0x8e0 0x5 0x1
-#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				0x268 0x6cc 0x000 0x6 0x0
-#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		0x268 0x6cc 0x000 0x7 0x0
-#define MX35_PAD_ATA_DIOW__ATA_DIOW				0x26c 0x6d0 0x000 0x0 0x0
-#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				0x26c 0x6d0 0x820 0x1 0x1
-#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			0x26c 0x6d0 0x000 0x2 0x0
-#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			0x26c 0x6d0 0x000 0x3 0x0
-#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				0x26c 0x6d0 0x7ec 0x4 0x2
-#define MX35_PAD_ATA_DIOW__GPIO2_9				0x26c 0x6d0 0x8e4 0x5 0x1
-#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				0x26c 0x6d0 0x000 0x6 0x0
-#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		0x26c 0x6d0 0x000 0x7 0x0
-#define MX35_PAD_ATA_DMACK__ATA_DMACK				0x270 0x6d4 0x000 0x0 0x0
-#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				0x270 0x6d4 0x824 0x1 0x1
-#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			0x270 0x6d4 0x9c8 0x2 0x1
-#define MX35_PAD_ATA_DMACK__CSPI2_MISO				0x270 0x6d4 0x7e8 0x4 0x2
-#define MX35_PAD_ATA_DMACK__GPIO2_10				0x270 0x6d4 0x86c 0x5 0x1
-#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				0x270 0x6d4 0x000 0x6 0x0
-#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		0x270 0x6d4 0x000 0x7 0x0
-#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			0x274 0x6d8 0x000 0x0 0x0
-#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			0x274 0x6d8 0x828 0x1 0x1
-#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		0x274 0x6d8 0x9a4 0x2 0x1
-#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			0x274 0x6d8 0x000 0x3 0x0
-#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				0x274 0x6d8 0x7e4 0x4 0x2
-#define MX35_PAD_ATA_RESET_B__GPIO2_11				0x274 0x6d8 0x870 0x5 0x1
-#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			0x274 0x6d8 0x000 0x6 0x0
-#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		0x274 0x6d8 0x000 0x7 0x0
-#define MX35_PAD_ATA_IORDY__ATA_IORDY				0x278 0x6dc 0x000 0x0 0x0
-#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				0x278 0x6dc 0x000 0x1 0x0
-#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		0x278 0x6dc 0x9a8 0x2 0x1
-#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			0x278 0x6dc 0x92c 0x3 0x3
-#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				0x278 0x6dc 0x000 0x4 0x0
-#define MX35_PAD_ATA_IORDY__GPIO2_12				0x278 0x6dc 0x874 0x5 0x1
-#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				0x278 0x6dc 0x000 0x6 0x0
-#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		0x278 0x6dc 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA0__ATA_DATA_0				0x27c 0x6e0 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				0x27c 0x6e0 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		0x27c 0x6e0 0x9ac 0x2 0x1
-#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			0x27c 0x6e0 0x928 0x3 0x4
-#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				0x27c 0x6e0 0x000 0x4 0x0
-#define MX35_PAD_ATA_DATA0__GPIO2_13				0x27c 0x6e0 0x878 0x5 0x1
-#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				0x27c 0x6e0 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		0x27c 0x6e0 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA1__ATA_DATA_1				0x280 0x6e4 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				0x280 0x6e4 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		0x280 0x6e4 0x9b0 0x2 0x1
-#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			0x280 0x6e4 0x000 0x3 0x0
-#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				0x280 0x6e4 0x000 0x4 0x0
-#define MX35_PAD_ATA_DATA1__GPIO2_14				0x280 0x6e4 0x87c 0x5 0x1
-#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				0x280 0x6e4 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			0x280 0x6e4 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA2__ATA_DATA_2				0x284 0x6e8 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				0x284 0x6e8 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		0x284 0x6e8 0x9b4 0x2 0x1
-#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			0x284 0x6e8 0x000 0x3 0x0
-#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				0x284 0x6e8 0x000 0x4 0x0
-#define MX35_PAD_ATA_DATA2__GPIO2_15				0x284 0x6e8 0x880 0x5 0x1
-#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				0x284 0x6e8 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			0x284 0x6e8 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA3__ATA_DATA_3				0x288 0x6ec 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				0x288 0x6ec 0x814 0x1 0x1
-#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		0x288 0x6ec 0x9b8 0x2 0x1
-#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				0x288 0x6ec 0x7e0 0x4 0x2
-#define MX35_PAD_ATA_DATA3__GPIO2_16				0x288 0x6ec 0x884 0x5 0x1
-#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			0x288 0x6ec 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			0x288 0x6ec 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA4__ATA_DATA_4				0x28c 0x6f0 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				0x28c 0x6f0 0x818 0x1 0x1
-#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		0x28c 0x6f0 0x9bc 0x2 0x1
-#define MX35_PAD_ATA_DATA4__GPIO2_17				0x28c 0x6f0 0x888 0x5 0x1
-#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			0x28c 0x6f0 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			0x28c 0x6f0 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA5__ATA_DATA_5				0x290 0x6f4 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		0x290 0x6f4 0x9c0 0x2 0x1
-#define MX35_PAD_ATA_DATA5__GPIO2_18				0x290 0x6f4 0x88c 0x5 0x1
-#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			0x290 0x6f4 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			0x290 0x6f4 0x000 0x7 0x0
-#define MX35_PAD_ATA_DATA6__ATA_DATA_6				0x294 0x6f8 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				0x294 0x6f8 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA6__UART1_DTR				0x294 0x6f8 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			0x294 0x6f8 0x7b4 0x3 0x0
-#define MX35_PAD_ATA_DATA6__GPIO2_19				0x294 0x6f8 0x890 0x5 0x1
-#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			0x294 0x6f8 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA7__ATA_DATA_7				0x298 0x6fc 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				0x298 0x6fc 0x7c8 0x1 0x2
-#define MX35_PAD_ATA_DATA7__UART1_DSR				0x298 0x6fc 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			0x298 0x6fc 0x7b0 0x3 0x0
-#define MX35_PAD_ATA_DATA7__GPIO2_20				0x298 0x6fc 0x898 0x5 0x1
-#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			0x298 0x6fc 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA8__ATA_DATA_8				0x29c 0x700 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA8__UART3_RTS				0x29c 0x700 0x99c 0x1 0x1
-#define MX35_PAD_ATA_DATA8__UART1_RI				0x29c 0x700 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			0x29c 0x700 0x7c0 0x3 0x0
-#define MX35_PAD_ATA_DATA8__GPIO2_21				0x29c 0x700 0x89c 0x5 0x1
-#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			0x29c 0x700 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA9__ATA_DATA_9				0x2a0 0x704 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA9__UART3_CTS				0x2a0 0x704 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA9__UART1_DCD				0x2a0 0x704 0x000 0x2 0x0
-#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			0x2a0 0x704 0x7c4 0x3 0x0
-#define MX35_PAD_ATA_DATA9__GPIO2_22				0x2a0 0x704 0x8a0 0x5 0x1
-#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			0x2a0 0x704 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA10__ATA_DATA_10			0x2a4 0x708 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			0x2a4 0x708 0x9a0 0x1 0x2
-#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			0x2a4 0x708 0x7b8 0x3 0x0
-#define MX35_PAD_ATA_DATA10__GPIO2_23				0x2a4 0x708 0x8a4 0x5 0x1
-#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			0x2a4 0x708 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA11__ATA_DATA_11			0x2a8 0x70c 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			0x2a8 0x70c 0x000 0x1 0x0
-#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			0x2a8 0x70c 0x7bc 0x3 0x0
-#define MX35_PAD_ATA_DATA11__GPIO2_24				0x2a8 0x70c 0x8a8 0x5 0x1
-#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			0x2a8 0x70c 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA12__ATA_DATA_12			0x2ac 0x710 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA12__I2C3_SCL				0x2ac 0x710 0x91c 0x1 0x3
-#define MX35_PAD_ATA_DATA12__GPIO2_25				0x2ac 0x710 0x8ac 0x5 0x1
-#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			0x2ac 0x710 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA13__ATA_DATA_13			0x2b0 0x714 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA13__I2C3_SDA				0x2b0 0x714 0x920 0x1 0x3
-#define MX35_PAD_ATA_DATA13__GPIO2_26				0x2b0 0x714 0x8b0 0x5 0x1
-#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			0x2b0 0x714 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA14__ATA_DATA_14			0x2b4 0x718 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			0x2b4 0x718 0x930 0x1 0x2
-#define MX35_PAD_ATA_DATA14__KPP_ROW_0				0x2b4 0x718 0x970 0x3 0x2
-#define MX35_PAD_ATA_DATA14__GPIO2_27				0x2b4 0x718 0x8b4 0x5 0x1
-#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			0x2b4 0x718 0x000 0x6 0x0
-#define MX35_PAD_ATA_DATA15__ATA_DATA_15			0x2b8 0x71c 0x000 0x0 0x0
-#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			0x2b8 0x71c 0x934 0x1 0x2
-#define MX35_PAD_ATA_DATA15__KPP_ROW_1				0x2b8 0x71c 0x974 0x3 0x2
-#define MX35_PAD_ATA_DATA15__GPIO2_28				0x2b8 0x71c 0x8b8 0x5 0x1
-#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			0x2b8 0x71c 0x000 0x6 0x0
-#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				0x2bc 0x720 0x000 0x0 0x0
-#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				0x2bc 0x720 0x938 0x1 0x3
-#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				0x2bc 0x720 0x978 0x3 0x2
-#define MX35_PAD_ATA_INTRQ__GPIO2_29				0x2bc 0x720 0x8bc 0x5 0x1
-#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			0x2bc 0x720 0x000 0x6 0x0
-#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			0x2c0 0x724 0x000 0x0 0x0
-#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			0x2c0 0x724 0x93c 0x1 0x3
-#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				0x2c0 0x724 0x97c 0x3 0x2
-#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				0x2c0 0x724 0x8c4 0x5 0x1
-#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			0x2c0 0x724 0x000 0x6 0x0
-#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				0x2c4 0x728 0x000 0x0 0x0
-#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				0x2c4 0x728 0x940 0x1 0x2
-#define MX35_PAD_ATA_DMARQ__KPP_COL_0				0x2c4 0x728 0x950 0x3 0x2
-#define MX35_PAD_ATA_DMARQ__GPIO2_31				0x2c4 0x728 0x8c8 0x5 0x1
-#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			0x2c4 0x728 0x000 0x6 0x0
-#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			0x2c4 0x728 0x000 0x7 0x0
-#define MX35_PAD_ATA_DA0__ATA_DA_0				0x2c8 0x72c 0x000 0x0 0x0
-#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				0x2c8 0x72c 0x944 0x1 0x2
-#define MX35_PAD_ATA_DA0__KPP_COL_1				0x2c8 0x72c 0x954 0x3 0x2
-#define MX35_PAD_ATA_DA0__GPIO3_0				0x2c8 0x72c 0x8e8 0x5 0x1
-#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				0x2c8 0x72c 0x000 0x6 0x0
-#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			0x2c8 0x72c 0x000 0x7 0x0
-#define MX35_PAD_ATA_DA1__ATA_DA_1				0x2cc 0x730 0x000 0x0 0x0
-#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				0x2cc 0x730 0x948 0x1 0x2
-#define MX35_PAD_ATA_DA1__KPP_COL_2				0x2cc 0x730 0x958 0x3 0x2
-#define MX35_PAD_ATA_DA1__GPIO3_1				0x2cc 0x730 0x000 0x5 0x0
-#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				0x2cc 0x730 0x000 0x6 0x0
-#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			0x2cc 0x730 0x000 0x7 0x0
-#define MX35_PAD_ATA_DA2__ATA_DA_2				0x2d0 0x734 0x000 0x0 0x0
-#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				0x2d0 0x734 0x94c 0x1 0x2
-#define MX35_PAD_ATA_DA2__KPP_COL_3				0x2d0 0x734 0x95c 0x3 0x2
-#define MX35_PAD_ATA_DA2__GPIO3_2				0x2d0 0x734 0x000 0x5 0x0
-#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				0x2d0 0x734 0x000 0x6 0x0
-#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			0x2d0 0x734 0x000 0x7 0x0
-#define MX35_PAD_MLB_CLK__MLB_MLBCLK				0x2d4 0x738 0x000 0x0 0x0
-#define MX35_PAD_MLB_CLK__GPIO3_3				0x2d4 0x738 0x000 0x5 0x0
-#define MX35_PAD_MLB_DAT__MLB_MLBDAT				0x2d8 0x73c 0x000 0x0 0x0
-#define MX35_PAD_MLB_DAT__GPIO3_4				0x2d8 0x73c 0x904 0x5 0x1
-#define MX35_PAD_MLB_SIG__MLB_MLBSIG				0x2dc 0x740 0x000 0x0 0x0
-#define MX35_PAD_MLB_SIG__GPIO3_5				0x2dc 0x740 0x908 0x5 0x1
-#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				0x2e0 0x744 0x000 0x0 0x0
-#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			0x2e0 0x744 0x804 0x1 0x1
-#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			0x2e0 0x744 0x9a0 0x2 0x3
-#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			0x2e0 0x744 0x9ec 0x3 0x1
-#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				0x2e0 0x744 0x7ec 0x4 0x3
-#define MX35_PAD_FEC_TX_CLK__GPIO3_6				0x2e0 0x744 0x90c 0x5 0x1
-#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		0x2e0 0x744 0x928 0x6 0x5
-#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		0x2e0 0x744 0x000 0x7 0x0
-#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				0x2e4 0x748 0x000 0x0 0x0
-#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			0x2e4 0x748 0x808 0x1 0x1
-#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			0x2e4 0x748 0x000 0x2 0x0
-#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			0x2e4 0x748 0x000 0x3 0x0
-#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				0x2e4 0x748 0x7e8 0x4 0x3
-#define MX35_PAD_FEC_RX_CLK__GPIO3_7				0x2e4 0x748 0x910 0x5 0x1
-#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			0x2e4 0x748 0x92c 0x6 0x4
-#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		0x2e4 0x748 0x000 0x7 0x0
-#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				0x2e8 0x74c 0x000 0x0 0x0
-#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				0x2e8 0x74c 0x80c 0x1 0x1
-#define MX35_PAD_FEC_RX_DV__UART3_RTS				0x2e8 0x74c 0x99c 0x2 0x2
-#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			0x2e8 0x74c 0x9f0 0x3 0x1
-#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				0x2e8 0x74c 0x7e0 0x4 0x3
-#define MX35_PAD_FEC_RX_DV__GPIO3_8				0x2e8 0x74c 0x914 0x5 0x1
-#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			0x2e8 0x74c 0x000 0x6 0x0
-#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		0x2e8 0x74c 0x000 0x7 0x0
-#define MX35_PAD_FEC_COL__FEC_COL				0x2ec 0x750 0x000 0x0 0x0
-#define MX35_PAD_FEC_COL__ESDHC1_DAT7				0x2ec 0x750 0x810 0x1 0x1
-#define MX35_PAD_FEC_COL__UART3_CTS				0x2ec 0x750 0x000 0x2 0x0
-#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			0x2ec 0x750 0x9cc 0x3 0x1
-#define MX35_PAD_FEC_COL__CSPI2_RDY				0x2ec 0x750 0x7e4 0x4 0x3
-#define MX35_PAD_FEC_COL__GPIO3_9				0x2ec 0x750 0x918 0x5 0x1
-#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			0x2ec 0x750 0x000 0x6 0x0
-#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			0x2ec 0x750 0x000 0x7 0x0
-#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			0x2f0 0x754 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA0__PWM_PWMO				0x2f0 0x754 0x000 0x1 0x0
-#define MX35_PAD_FEC_RDATA0__UART3_DTR				0x2f0 0x754 0x000 0x2 0x0
-#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		0x2f0 0x754 0x9d0 0x3 0x1
-#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				0x2f0 0x754 0x7f0 0x4 0x2
-#define MX35_PAD_FEC_RDATA0__GPIO3_10				0x2f0 0x754 0x8ec 0x5 0x1
-#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			0x2f0 0x754 0x000 0x6 0x0
-#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		0x2f0 0x754 0x000 0x7 0x0
-#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			0x2f4 0x758 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			0x2f4 0x758 0x000 0x1 0x0
-#define MX35_PAD_FEC_TDATA0__UART3_DSR				0x2f4 0x758 0x000 0x2 0x0
-#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		0x2f4 0x758 0x9d4 0x3 0x1
-#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				0x2f4 0x758 0x7f4 0x4 0x2
-#define MX35_PAD_FEC_TDATA0__GPIO3_11				0x2f4 0x758 0x8f0 0x5 0x1
-#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			0x2f4 0x758 0x000 0x6 0x0
-#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		0x2f4 0x758 0x000 0x7 0x0
-#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				0x2f8 0x75c 0x000 0x0 0x0
-#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			0x2f8 0x75c 0x998 0x1 0x3
-#define MX35_PAD_FEC_TX_EN__UART3_RI				0x2f8 0x75c 0x000 0x2 0x0
-#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		0x2f8 0x75c 0x9d8 0x3 0x1
-#define MX35_PAD_FEC_TX_EN__GPIO3_12				0x2f8 0x75c 0x8f4 0x5 0x1
-#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			0x2f8 0x75c 0x000 0x6 0x0
-#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		0x2f8 0x75c 0x000 0x7 0x0
-#define MX35_PAD_FEC_MDC__FEC_MDC				0x2fc 0x760 0x000 0x0 0x0
-#define MX35_PAD_FEC_MDC__CAN2_TXCAN				0x2fc 0x760 0x000 0x1 0x0
-#define MX35_PAD_FEC_MDC__UART3_DCD				0x2fc 0x760 0x000 0x2 0x0
-#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			0x2fc 0x760 0x9dc 0x3 0x1
-#define MX35_PAD_FEC_MDC__GPIO3_13				0x2fc 0x760 0x8f8 0x5 0x1
-#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				0x2fc 0x760 0x000 0x6 0x0
-#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			0x2fc 0x760 0x000 0x7 0x0
-#define MX35_PAD_FEC_MDIO__FEC_MDIO				0x300 0x764 0x000 0x0 0x0
-#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				0x300 0x764 0x7cc 0x1 0x2
-#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			0x300 0x764 0x9e0 0x3 0x1
-#define MX35_PAD_FEC_MDIO__GPIO3_14				0x300 0x764 0x8fc 0x5 0x1
-#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				0x300 0x764 0x000 0x6 0x0
-#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			0x300 0x764 0x000 0x7 0x0
-#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				0x304 0x768 0x000 0x0 0x0
-#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				0x304 0x768 0x990 0x1 0x2
-#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			0x304 0x768 0x994 0x2 0x4
-#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		0x304 0x768 0x9e4 0x3 0x1
-#define MX35_PAD_FEC_TX_ERR__GPIO3_15				0x304 0x768 0x900 0x5 0x1
-#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			0x304 0x768 0x924 0x6 0x3
-#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		0x304 0x768 0x000 0x7 0x0
-#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				0x308 0x76c 0x000 0x0 0x0
-#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			0x308 0x76c 0x930 0x1 0x3
-#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		0x308 0x76c 0x9e8 0x3 0x1
-#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				0x308 0x76c 0x960 0x4 0x1
-#define MX35_PAD_FEC_RX_ERR__GPIO3_16				0x308 0x76c 0x000 0x5 0x0
-#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			0x308 0x76c 0x92c 0x6 0x5
-#define MX35_PAD_FEC_CRS__FEC_CRS				0x30c 0x770 0x000 0x0 0x0
-#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				0x30c 0x770 0x934 0x1 0x3
-#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			0x30c 0x770 0x000 0x3 0x0
-#define MX35_PAD_FEC_CRS__KPP_COL_5				0x30c 0x770 0x964 0x4 0x1
-#define MX35_PAD_FEC_CRS__GPIO3_17				0x30c 0x770 0x000 0x5 0x0
-#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			0x30c 0x770 0x000 0x6 0x0
-#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			0x310 0x774 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			0x310 0x774 0x938 0x1 0x4
-#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			0x310 0x774 0x000 0x2 0x0
-#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			0x310 0x774 0x9f4 0x3 0x2
-#define MX35_PAD_FEC_RDATA1__KPP_COL_6				0x310 0x774 0x968 0x4 0x1
-#define MX35_PAD_FEC_RDATA1__GPIO3_18				0x310 0x774 0x000 0x5 0x0
-#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			0x310 0x774 0x000 0x6 0x0
-#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			0x314 0x778 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			0x314 0x778 0x93c 0x1 0x4
-#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			0x314 0x778 0x7bc 0x2 0x1
-#define MX35_PAD_FEC_TDATA1__KPP_COL_7				0x314 0x778 0x96c 0x4 0x1
-#define MX35_PAD_FEC_TDATA1__GPIO3_19				0x314 0x778 0x000 0x5 0x0
-#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			0x314 0x778 0x000 0x6 0x0
-#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			0x318 0x77c 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			0x318 0x77c 0x940 0x1 0x3
-#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			0x318 0x77c 0x7b4 0x2 0x1
-#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				0x318 0x77c 0x980 0x4 0x1
-#define MX35_PAD_FEC_RDATA2__GPIO3_20				0x318 0x77c 0x000 0x5 0x0
-#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			0x31c 0x780 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			0x31c 0x780 0x944 0x1 0x3
-#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			0x31c 0x780 0x7b0 0x2 0x1
-#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				0x31c 0x780 0x984 0x4 0x1
-#define MX35_PAD_FEC_TDATA2__GPIO3_21				0x31c 0x780 0x000 0x5 0x0
-#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			0x320 0x784 0x000 0x0 0x0
-#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			0x320 0x784 0x948 0x1 0x3
-#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			0x320 0x784 0x7c0 0x2 0x1
-#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				0x320 0x784 0x988 0x4 0x1
-#define MX35_PAD_FEC_RDATA3__GPIO3_22				0x320 0x784 0x000 0x6 0x0
-#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			0x324 0x788 0x000 0x0 0x0
-#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			0x324 0x788 0x94c 0x1 0x3
-#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			0x324 0x788 0x7c4 0x2 0x1
-#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				0x324 0x788 0x98c 0x4 0x1
-#define MX35_PAD_FEC_TDATA3__GPIO3_23				0x324 0x788 0x000 0x5 0x0
-#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			0x000 0x78c 0x000 0x0 0x0
-#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			0x000 0x790 0x000 0x0 0x0
-
-#endif /* __DTS_IMX35_PINFUNC_H */
diff --git a/src/arm/imx35.dtsi b/src/arm/imx35.dtsi
deleted file mode 100644
index 442e216ca9d9..000000000000
--- a/src/arm/imx35.dtsi
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * Copyright 2012 Steffen Trumtrar, Pengutronix
- *
- * based on imx27.dtsi
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include "imx35-pinfunc.h"
-
-/ {
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		spi0 = &spi1;
-		spi1 = &spi2;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1136";
-			device_type = "cpu";
-		};
-	};
-
-	avic: avic-interrupt-controller@68000000 {
-		compatible = "fsl,imx35-avic", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x68000000 0x10000000>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&avic>;
-		ranges;
-
-		L2: l2-cache@30000000 {
-			compatible = "arm,l210-cache";
-			reg = <0x30000000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		aips1: aips@43f00000 {
-			compatible = "fsl,aips", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x43f00000 0x100000>;
-			ranges;
-
-			i2c1: i2c@43f80000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
-				reg = <0x43f80000 0x4000>;
-				clocks = <&clks 51>;
-				clock-names = "ipg_per";
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@43f84000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
-				reg = <0x43f84000 0x4000>;
-				clocks = <&clks 53>;
-				clock-names = "ipg_per";
-				interrupts = <3>;
-				status = "disabled";
-			};
-
-			uart1: serial@43f90000 {
-				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
-				reg = <0x43f90000 0x4000>;
-				clocks = <&clks 9>, <&clks 70>;
-				clock-names = "ipg", "per";
-				interrupts = <45>;
-				status = "disabled";
-			};
-
-			uart2: serial@43f94000 {
-				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
-				reg = <0x43f94000 0x4000>;
-				clocks = <&clks 9>, <&clks 71>;
-				clock-names = "ipg", "per";
-				interrupts = <32>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@43f98000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
-				reg = <0x43f98000 0x4000>;
-				clocks = <&clks 52>;
-				clock-names = "ipg_per";
-				interrupts = <4>;
-				status = "disabled";
-			};
-
-			ssi1: ssi@43fa0000 {
-				compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
-				reg = <0x43fa0000 0x4000>;
-				interrupts = <11>;
-				clocks = <&clks 68>;
-				dmas = <&sdma 28 0 0>,
-				       <&sdma 29 0 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			spi1: cspi@43fa4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-cspi";
-				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 35 &clks 35>;
-				clock-names = "ipg", "per";
-				interrupts = <14>;
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@43fac000 {
-				compatible = "fsl,imx35-iomuxc";
-				reg = <0x43fac000 0x4000>;
-			};
-		};
-
-		spba: spba-bus@50000000 {
-			compatible = "fsl,spba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x100000>;
-			ranges;
-
-			uart3: serial@5000c000 {
-				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
-				reg = <0x5000c000 0x4000>;
-				clocks = <&clks 9>, <&clks 72>;
-				clock-names = "ipg", "per";
-				interrupts = <18>;
-				status = "disabled";
-			};
-
-			spi2: cspi@50010000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx35-cspi";
-				reg = <0x50010000 0x4000>;
-				interrupts = <13>;
-				clocks = <&clks 36 &clks 36>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			fec: fec@50038000 {
-				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
-				reg = <0x50038000 0x4000>;
-				clocks = <&clks 46>, <&clks 8>;
-				clock-names = "ipg", "ahb";
-				interrupts = <57>;
-				status = "disabled";
-			};
-		};
-
-		aips2: aips@53f00000 {
-			compatible = "fsl,aips", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x53f00000 0x100000>;
-			ranges;
-
-			clks: ccm@53f80000 {
-				compatible = "fsl,imx35-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <31>;
-				#clock-cells = <1>;
-			};
-
-			gpt: timer@53f90000 {
-				compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks 9>, <&clks 50>;
-				clock-names = "ipg", "per";
-			};
-
-			gpio3: gpio@53fa4000 {
-				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
-				reg = <0x53fa4000 0x4000>;
-				interrupts = <56>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			esdhc1: esdhc@53fb4000 {
-				compatible = "fsl,imx35-esdhc";
-				reg = <0x53fb4000 0x4000>;
-				interrupts = <7>;
-				clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			esdhc2: esdhc@53fb8000 {
-				compatible = "fsl,imx35-esdhc";
-				reg = <0x53fb8000 0x4000>;
-				interrupts = <8>;
-				clocks = <&clks 9>, <&clks 8>, <&clks 44>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			esdhc3: esdhc@53fbc000 {
-				compatible = "fsl,imx35-esdhc";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <9>;
-				clocks = <&clks 9>, <&clks 8>, <&clks 45>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			audmux: audmux@53fc4000 {
-				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
-				reg = <0x53fc4000 0x4000>;
-				status = "disabled";
-			};
-
-			gpio1: gpio@53fcc000 {
-				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
-				reg = <0x53fcc000 0x4000>;
-				interrupts = <52>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@53fd0000 {
-				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
-				reg = <0x53fd0000 0x4000>;
-				interrupts = <51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			sdma: sdma@53fd4000 {
-				compatible = "fsl,imx35-sdma";
-				reg = <0x53fd4000 0x4000>;
-				clocks = <&clks 9>, <&clks 65>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <3>;
-				interrupts = <34>;
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
-			};
-
-			wdog: wdog@53fdc000 {
-				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
-				reg = <0x53fdc000 0x4000>;
-				clocks = <&clks 74>;
-				clock-names = "";
-				interrupts = <55>;
-			};
-
-			can1: can@53fe4000 {
-				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
-				reg = <0x53fe4000 0x1000>;
-				clocks = <&clks 33>;
-				clock-names = "ipg";
-				interrupts = <43>;
-				status = "disabled";
-			};
-
-			can2: can@53fe8000 {
-				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
-				reg = <0x53fe8000 0x1000>;
-				clocks = <&clks 34>;
-				clock-names = "ipg";
-				interrupts = <44>;
-				status = "disabled";
-			};
-
-			usbotg: usb@53ff4000 {
-				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
-				reg = <0x53ff4000 0x0200>;
-				interrupts = <37>;
-				clocks = <&clks 73>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,usbphy = <&usbphy0>;
-				status = "disabled";
-			};
-
-			usbhost1: usb@53ff4400 {
-				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
-				reg = <0x53ff4400 0x0200>;
-				interrupts = <35>;
-				clocks = <&clks 73>;
-				fsl,usbmisc = <&usbmisc 1>;
-				fsl,usbphy = <&usbphy1>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@53ff4600 {
-				#index-cells = <1>;
-				compatible = "fsl,imx35-usbmisc";
-				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
-				clock-names = "ipg", "ahb", "per";
-				reg = <0x53ff4600 0x00f>;
-			};
-		};
-
-		emi@80000000 { /* External Memory Interface */
-			compatible = "fsl,emi", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80000000 0x40000000>;
-			ranges;
-
-			nfc: nand@bb000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
-				reg = <0xbb000000 0x2000>;
-				clocks = <&clks 29>;
-				clock-names = "";
-				interrupts = <33>;
-				status = "disabled";
-			};
-
-			weim: weim@b8002000 {
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clocks = <&clks 0>;
-				compatible = "fsl,imx35-weim", "fsl,imx27-weim";
-				reg = <0xb8002000 0x1000>;
-				ranges = <
-					0 0 0xa0000000 0x8000000
-					1 0 0xa8000000 0x8000000
-					2 0 0xb0000000 0x2000000
-					3 0 0xb2000000 0x2000000
-					4 0 0xb4000000 0x2000000
-					5 0 0xb6000000 0x2000000
-				>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usb-phy@0 {
-			reg = <0>;
-			compatible = "usb-nop-xceiv";
-		};
-
-		usbphy1: usb-phy@1 {
-			reg = <1>;
-			compatible = "usb-nop-xceiv";
-		};
-	};
-};
diff --git a/src/arm/imx50-evk.dts b/src/arm/imx50-evk.dts
deleted file mode 100644
index 1b22512c91bd..000000000000
--- a/src/arm/imx50-evk.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx50.dtsi"
-
-/ {
-	model = "Freescale i.MX50 Evaluation Kit";
-	compatible = "fsl,imx50-evk", "fsl,imx50";
-
-	memory {
-		reg = <0x70000000 0x80000000>;
-	};
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
-	status = "okay";
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p32", "m25p80";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition@100000 {
-			label = "kernel";
-			reg = <0x100000 0x300000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 12 0>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx50-evk {
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
-				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
-				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
-				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
-				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
-				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
-				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
-				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
-				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
-				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
-				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
-				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
-				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
-				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
-				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
-				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbh2 {
-	status = "okay";
-};
-
-&usbh3 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
diff --git a/src/arm/imx50-pinfunc.h b/src/arm/imx50-pinfunc.h
deleted file mode 100644
index 97e6e7f4ebdd..000000000000
--- a/src/arm/imx50-pinfunc.h
+++ /dev/null
@@ -1,923 +0,0 @@
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX50_PINFUNC_H
-#define __DTS_IMX50_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX50_PAD_KEY_COL0__KPP_COL_0				0x020 0x2cc 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL0__GPIO4_0				0x020 0x2cc 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL0__EIM_NANDF_CLE			0x020 0x2cc 0x000 0x2 0x0
-#define MX50_PAD_KEY_COL0__CTI_TRIGIN7				0x020 0x2cc 0x000 0x6 0x0
-#define MX50_PAD_KEY_COL0__USBPHY1_TXREADY			0x020 0x2cc 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW0__KPP_ROW_0				0x024 0x2d0 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW0__GPIO4_1				0x024 0x2d0 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE			0x024 0x2d0 0x000 0x2 0x0
-#define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7			0x024 0x2d0 0x000 0x6 0x0
-#define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID			0x024 0x2d0 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL1__KPP_COL_1				0x028 0x2d4 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL1__GPIO4_2				0x028 0x2d4 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL1__EIM_NANDF_CEN_0			0x028 0x2d4 0x000 0x2 0x0
-#define MX50_PAD_KEY_COL1__CTI_TRIGOUT_ACK6			0x028 0x2d4 0x000 0x6 0x0
-#define MX50_PAD_KEY_COL1__USBPHY1_RXACTIVE			0x028 0x2d4 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW1__KPP_ROW_1				0x02c 0x2d8 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW1__GPIO4_3				0x02c 0x2d8 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
-#define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
-#define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL2__KPP_COL_1				0x030 0x2dc 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
-#define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
-#define MX50_PAD_KEY_COL2__USBPHY1_SIECLOCK			0x030 0x2dc 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW2__KPP_ROW_2				0x034 0x2e0 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW2__GPIO4_5				0x034 0x2e0 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
-#define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
-#define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL3__KPP_COL_2				0x038 0x2e4 0x000 0x0 0x0
-#define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
-#define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
-#define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0
-#define MX50_PAD_KEY_COL3__USBPHY1_LINESTATE_1			0x038 0x2e4 0x000 0x7 0x0
-#define MX50_PAD_KEY_ROW3__KPP_ROW_3				0x03c 0x2e8 0x000 0x0 0x0
-#define MX50_PAD_KEY_ROW3__GPIO4_7				0x03c 0x2e8 0x000 0x1 0x0
-#define MX50_PAD_KEY_ROW3__EIM_NANDF_DQS			0x03c 0x2e8 0x7b0 0x2 0x0
-#define MX50_PAD_KEY_ROW3__SDMA_EXT_EVENT_1			0x03c 0x2e8 0x7bc 0x6 0x0
-#define MX50_PAD_KEY_ROW3__USBPHY1_VBUSVALID			0x03c 0x2e8 0x000 0x7 0x0
-#define MX50_PAD_I2C1_SCL__I2C1_SCL				0x040 0x2ec 0x000 0x0 0x0
-#define MX50_PAD_I2C1_SCL__GPIO6_18				0x040 0x2ec 0x000 0x1 0x0
-#define MX50_PAD_I2C1_SCL__UART2_TXD_MUX			0x040 0x2ec 0x7cc 0x2 0x0
-#define MX50_PAD_I2C1_SDA__I2C1_SDA				0x044 0x2f0 0x000 0x0 0x0
-#define MX50_PAD_I2C1_SDA__GPIO6_19				0x044 0x2f0 0x000 0x1 0x0
-#define MX50_PAD_I2C1_SDA__UART2_RXD_MUX			0x044 0x2f0 0x7cc 0x2 0x1
-#define MX50_PAD_I2C2_SCL__I2C2_SCL				0x048 0x2f4 0x000 0x0 0x0
-#define MX50_PAD_I2C2_SCL__GPIO6_20				0x048 0x2f4 0x000 0x1 0x0
-#define MX50_PAD_I2C2_SCL__UART2_CTS				0x048 0x2f4 0x000 0x2 0x0
-#define MX50_PAD_I2C2_SDA__I2C2_SDA				0x04c 0x2f8 0x000 0x0 0x0
-#define MX50_PAD_I2C2_SDA__GPIO6_21				0x04c 0x2f8 0x000 0x1 0x0
-#define MX50_PAD_I2C2_SDA__UART2_RTS				0x04c 0x2f8 0x7c8 0x2 0x1
-#define MX50_PAD_I2C3_SCL__I2C3_SCL				0x050 0x2fc 0x000 0x0 0x0
-#define MX50_PAD_I2C3_SCL__GPIO6_22				0x050 0x2fc 0x000 0x1 0x0
-#define MX50_PAD_I2C3_SCL__FEC_MDC				0x050 0x2fc 0x000 0x2 0x0
-#define MX50_PAD_I2C3_SCL__GPC_PMIC_RDY				0x050 0x2fc 0x000 0x3 0x0
-#define MX50_PAD_I2C3_SCL__GPT_CAPIN1				0x050 0x2fc 0x000 0x5 0x0
-#define MX50_PAD_I2C3_SCL__OBSERVE_MUX_OBSRV_INT_OUT0		0x050 0x2fc 0x000 0x6 0x0
-#define MX50_PAD_I2C3_SCL__USBOH1_USBOTG_OC			0x050 0x2fc 0x7e8 0x7 0x0
-#define MX50_PAD_I2C3_SDA__I2C3_SDA				0x054 0x300 0x000 0x0 0x0
-#define MX50_PAD_I2C3_SDA__GPIO6_23				0x054 0x300 0x000 0x1 0x0
-#define MX50_PAD_I2C3_SDA__FEC_MDIO				0x054 0x300 0x774 0x2 0x0
-#define MX50_PAD_I2C3_SDA__TZIC_PWRFAIL_INT			0x054 0x300 0x000 0x3 0x0
-#define MX50_PAD_I2C3_SDA__SRTC_ALARM_DEB			0x054 0x300 0x000 0x4 0x0
-#define MX50_PAD_I2C3_SDA__GPT_CAPIN2				0x054 0x300 0x000 0x5 0x0
-#define MX50_PAD_I2C3_SDA__OBSERVE_MUX_OBSRV_INT_OUT1		0x054 0x300 0x000 0x6 0x0
-#define MX50_PAD_I2C3_SDA__USBOH1_USBOTG_PWR			0x054 0x300 0x000 0x7 0x0
-#define MX50_PAD_PWM1__PWM1_PWMO				0x058 0x304 0x000 0x0 0x0
-#define MX50_PAD_PWM1__GPIO6_24					0x058 0x304 0x000 0x1 0x0
-#define MX50_PAD_PWM1__USBOH1_USBOTG_OC				0x058 0x304 0x7e8 0x2 0x1
-#define MX50_PAD_PWM1__GPT_CMPOUT1				0x058 0x304 0x000 0x5 0x0
-#define MX50_PAD_PWM1__OBSERVE_MUX_OBSRV_INT_OUT2		0x058 0x304 0x000 0x6 0x0
-#define MX50_PAD_PWM1__SJC_FAIL					0x058 0x304 0x000 0x7 0x0
-#define MX50_PAD_PWM2__PWM2_PWMO				0x05c 0x308 0x000 0x0 0x0
-#define MX50_PAD_PWM2__GPIO6_25					0x05c 0x308 0x000 0x1 0x0
-#define MX50_PAD_PWM2__USBOH1_USBOTG_PWR			0x05c 0x308 0x000 0x2 0x0
-#define MX50_PAD_PWM2__GPT_CMPOUT2				0x05c 0x308 0x000 0x5 0x0
-#define MX50_PAD_PWM2__OBSERVE_MUX_OBSRV_INT_OUT3		0x05c 0x308 0x000 0x6 0x0
-#define MX50_PAD_PWM2__SRC_ANY_PU_RST				0x05c 0x308 0x000 0x7 0x0
-#define MX50_PAD_OWIRE__OWIRE_LINE				0x060 0x30c 0x000 0x0 0x0
-#define MX50_PAD_OWIRE__GPIO6_26				0x060 0x30c 0x000 0x1 0x0
-#define MX50_PAD_OWIRE__USBOH1_USBH1_OC				0x060 0x30c 0x000 0x2 0x0
-#define MX50_PAD_OWIRE__CCM_SSI_EXT1_CLK			0x060 0x30c 0x000 0x3 0x0
-#define MX50_PAD_OWIRE__EPDC_PWRIRQ				0x060 0x30c 0x000 0x4 0x0
-#define MX50_PAD_OWIRE__GPT_CMPOUT3				0x060 0x30c 0x000 0x5 0x0
-#define MX50_PAD_OWIRE__OBSERVE_MUX_OBSRV_INT_OUT4		0x060 0x30c 0x000 0x6 0x0
-#define MX50_PAD_OWIRE__SJC_JTAG_ACT				0x060 0x30c 0x000 0x7 0x0
-#define MX50_PAD_EPITO__EPIT1_EPITO				0x064 0x310 0x000 0x0 0x0
-#define MX50_PAD_EPITO__GPIO6_27				0x064 0x310 0x000 0x1 0x0
-#define MX50_PAD_EPITO__USBOH1_USBH1_PWR			0x064 0x310 0x000 0x2 0x0
-#define MX50_PAD_EPITO__CCM_SSI_EXT2_CLK			0x064 0x310 0x000 0x3 0x0
-#define MX50_PAD_EPITO__DPLLIP1_TOG_EN				0x064 0x310 0x000 0x4 0x0
-#define MX50_PAD_EPITO__GPT_CLK_IN				0x064 0x310 0x000 0x5 0x0
-#define MX50_PAD_EPITO__PMU_IRQ_B				0x064 0x310 0x000 0x6 0x0
-#define MX50_PAD_EPITO__SJC_DE_B				0x064 0x310 0x000 0x7 0x0
-#define MX50_PAD_WDOG__WDOG1_WDOG_B				0x068 0x314 0x000 0x0 0x0
-#define MX50_PAD_WDOG__GPIO6_28					0x068 0x314 0x000 0x1 0x0
-#define MX50_PAD_WDOG__WDOG1_WDOG_RST_B_DEB			0x068 0x314 0x000 0x2 0x0
-#define MX50_PAD_WDOG__CCM_XTAL32K				0x068 0x314 0x000 0x6 0x0
-#define MX50_PAD_WDOG__SJC_DONE					0x068 0x314 0x000 0x7 0x0
-#define MX50_PAD_SSI_TXFS__AUDMUX_AUD3_TXFS			0x06c 0x318 0x000 0x0 0x0
-#define MX50_PAD_SSI_TXFS__GPIO6_0				0x06c 0x318 0x000 0x1 0x0
-#define MX50_PAD_SSI_TXFS__SRC_BT_FUSE_RSV_1			0x06c 0x318 0x000 0x6 0x0
-#define MX50_PAD_SSI_TXFS__USBPHY1_DATAOUT_8			0x06c 0x318 0x000 0x7 0x0
-#define MX50_PAD_SSI_TXC__AUDMUX_AUD3_TXC			0x070 0x31c 0x000 0x0 0x0
-#define MX50_PAD_SSI_TXC__GPIO6_1				0x070 0x31c 0x000 0x1 0x0
-#define MX50_PAD_SSI_TXC__SRC_BT_FUSE_RSV_0			0x070 0x31c 0x000 0x6 0x0
-#define MX50_PAD_SSI_TXC__USBPHY1_DATAOUT_9			0x070 0x31c 0x000 0x7 0x0
-#define MX50_PAD_SSI_TXD__AUDMUX_AUD3_TXD			0x074 0x320 0x000 0x0 0x0
-#define MX50_PAD_SSI_TXD__GPIO6_2				0x074 0x320 0x000 0x1 0x0
-#define MX50_PAD_SSI_TXD__CSPI_RDY				0x074 0x320 0x6e8 0x4 0x0
-#define MX50_PAD_SSI_TXD__USBPHY1_DATAOUT_10			0x074 0x320 0x000 0x7 0x0
-#define MX50_PAD_SSI_RXD__AUDMUX_AUD3_RXD			0x078 0x324 0x000 0x0 0x0
-#define MX50_PAD_SSI_RXD__GPIO6_3				0x078 0x324 0x000 0x1 0x0
-#define MX50_PAD_SSI_RXD__CSPI_SS3				0x078 0x324 0x6f4 0x4 0x0
-#define MX50_PAD_SSI_RXD__USBPHY1_DATAOUT_11			0x078 0x324 0x000 0x7 0x0
-#define MX50_PAD_SSI_RXFS__AUDMUX_AUD3_RXFS			0x07c 0x328 0x000 0x0 0x0
-#define MX50_PAD_SSI_RXFS__GPIO6_4				0x07c 0x328 0x000 0x1 0x0
-#define MX50_PAD_SSI_RXFS__UART5_TXD_MUX			0x07c 0x328 0x7e4 0x2 0x0
-#define MX50_PAD_SSI_RXFS__EIM_WEIM_D_6				0x07c 0x328 0x804 0x3 0x0
-#define MX50_PAD_SSI_RXFS__CSPI_SS2				0x07c 0x328 0x6f0 0x4 0x0
-#define MX50_PAD_SSI_RXFS__FEC_COL				0x07c 0x328 0x770 0x5 0x0
-#define MX50_PAD_SSI_RXFS__FEC_MDC				0x07c 0x328 0x000 0x6 0x0
-#define MX50_PAD_SSI_RXFS__USBPHY1_DATAOUT_12			0x07c 0x328 0x000 0x7 0x0
-#define MX50_PAD_SSI_RXC__AUDMUX_AUD3_RXC			0x080 0x32c 0x000 0x0 0x0
-#define MX50_PAD_SSI_RXC__GPIO6_5				0x080 0x32c 0x000 0x1 0x0
-#define MX50_PAD_SSI_RXC__UART5_RXD_MUX				0x080 0x32c 0x7e4 0x2 0x1
-#define MX50_PAD_SSI_RXC__EIM_WEIM_D_7				0x080 0x32c 0x808 0x3 0x0
-#define MX50_PAD_SSI_RXC__CSPI_SS1				0x080 0x32c 0x6ec 0x4 0x0
-#define MX50_PAD_SSI_RXC__FEC_RX_CLK				0x080 0x32c 0x780 0x5 0x0
-#define MX50_PAD_SSI_RXC__FEC_MDIO				0x080 0x32c 0x774 0x6 0x1
-#define MX50_PAD_SSI_RXC__USBPHY1_DATAOUT_13			0x080 0x32c 0x000 0x7 0x0
-#define MX50_PAD_UART1_TXD__UART1_TXD_MUX			0x084 0x330 0x7c4 0x0 0x0
-#define MX50_PAD_UART1_TXD__GPIO6_6				0x084 0x330 0x000 0x1 0x0
-#define MX50_PAD_UART1_TXD__USBPHY1_DATAOUT_14			0x084 0x330 0x000 0x7 0x0
-#define MX50_PAD_UART1_RXD__UART1_RXD_MUX			0x088 0x334 0x7c4 0x0 0x1
-#define MX50_PAD_UART1_RXD__GPIO6_7				0x088 0x334 0x000 0x1 0x0
-#define MX50_PAD_UART1_RXD__USBPHY1_DATAOUT_15			0x088 0x334 0x000 0x7 0x0
-#define MX50_PAD_UART1_CTS__UART1_CTS				0x08c 0x338 0x000 0x0 0x0
-#define MX50_PAD_UART1_CTS__GPIO6_8				0x08c 0x338 0x000 0x1 0x0
-#define MX50_PAD_UART1_CTS__UART5_TXD_MUX			0x08c 0x338 0x7e4 0x2 0x2
-#define MX50_PAD_UART1_CTS__ESDHC4_DAT4				0x08c 0x338 0x760 0x4 0x0
-#define MX50_PAD_UART1_CTS__ESDHC4_CMD				0x08c 0x338 0x74c 0x5 0x0
-#define MX50_PAD_UART1_CTS__USBPHY2_DATAOUT_8			0x08c 0x338 0x000 0x7 0x0
-#define MX50_PAD_UART1_RTS__UART1_RTS				0x090 0x33c 0x7c0 0x0 0x3
-#define MX50_PAD_UART1_RTS__GPIO6_9				0x090 0x33c 0x000 0x1 0x0
-#define MX50_PAD_UART1_RTS__UART5_RXD_MUX			0x090 0x33c 0x7e4 0x2 0x3
-#define MX50_PAD_UART1_RTS__ESDHC4_DAT5				0x090 0x33c 0x764 0x4 0x0
-#define MX50_PAD_UART1_RTS__ESDHC4_CLK				0x090 0x33c 0x748 0x5 0x0
-#define MX50_PAD_UART1_RTS__USBPHY2_DATAOUT_9			0x090 0x33c 0x000 0x7 0x0
-#define MX50_PAD_UART2_TXD__UART2_TXD_MUX			0x094 0x340 0x7cc 0x0 0x2
-#define MX50_PAD_UART2_TXD__GPIO6_10				0x094 0x340 0x000 0x1 0x0
-#define MX50_PAD_UART2_TXD__ESDHC4_DAT6				0x094 0x340 0x768 0x4 0x0
-#define MX50_PAD_UART2_TXD__ESDHC4_DAT4				0x094 0x340 0x760 0x5 0x1
-#define MX50_PAD_UART2_TXD__USBPHY2_DATAOUT_10			0x094 0x340 0x000 0x7 0x0
-#define MX50_PAD_UART2_RXD__UART2_RXD_MUX			0x098 0x344 0x7cc 0x0 0x3
-#define MX50_PAD_UART2_RXD__GPIO6_11				0x098 0x344 0x000 0x1 0x0
-#define MX50_PAD_UART2_RXD__ESDHC4_DAT7				0x098 0x344 0x76c 0x4 0x0
-#define MX50_PAD_UART2_RXD__ESDHC4_DAT5				0x098 0x344 0x764 0x5 0x1
-#define MX50_PAD_UART2_RXD__USBPHY2_DATAOUT_11			0x098 0x344 0x000 0x7 0x0
-#define MX50_PAD_UART2_CTS__UART2_CTS				0x09c 0x348 0x000 0x0 0x0
-#define MX50_PAD_UART2_CTS__GPIO6_12				0x09c 0x348 0x000 0x1 0x0
-#define MX50_PAD_UART2_CTS__ESDHC4_CMD				0x09c 0x348 0x74c 0x4 0x1
-#define MX50_PAD_UART2_CTS__ESDHC4_DAT6				0x09c 0x348 0x768 0x5 0x1
-#define MX50_PAD_UART2_CTS__USBPHY2_DATAOUT_12			0x09c 0x348 0x000 0x7 0x0
-#define MX50_PAD_UART2_RTS__UART2_RTS				0x0a0 0x34c 0x7c8 0x0 0x2
-#define MX50_PAD_UART2_RTS__GPIO6_13				0x0a0 0x34c 0x000 0x1 0x0
-#define MX50_PAD_UART2_RTS__ESDHC4_CLK				0x0a0 0x34c 0x748 0x4 0x1
-#define MX50_PAD_UART2_RTS__ESDHC4_DAT7				0x0a0 0x34c 0x76c 0x5 0x1
-#define MX50_PAD_UART2_RTS__USBPHY2_DATAOUT_13			0x0a0 0x34c 0x000 0x7 0x0
-#define MX50_PAD_UART3_TXD__UART3_TXD_MUX			0x0a4 0x350 0x7d4 0x0 0x0
-#define MX50_PAD_UART3_TXD__GPIO6_14				0x0a4 0x350 0x000 0x1 0x0
-#define MX50_PAD_UART3_TXD__ESDHC1_DAT4				0x0a4 0x350 0x000 0x3 0x0
-#define MX50_PAD_UART3_TXD__ESDHC4_DAT0				0x0a4 0x350 0x000 0x4 0x0
-#define MX50_PAD_UART3_TXD__ESDHC2_WP				0x0a4 0x350 0x744 0x5 0x0
-#define MX50_PAD_UART3_TXD__EIM_WEIM_D_12			0x0a4 0x350 0x81c 0x6 0x0
-#define MX50_PAD_UART3_TXD__USBPHY2_DATAOUT_14			0x0a4 0x350 0x000 0x7 0x0
-#define MX50_PAD_UART3_RXD__UART3_RXD_MUX			0x0a8 0x354 0x7d4 0x0 0x1
-#define MX50_PAD_UART3_RXD__GPIO6_15				0x0a8 0x354 0x000 0x1 0x0
-#define MX50_PAD_UART3_RXD__ESDHC1_DAT5				0x0a8 0x354 0x000 0x3 0x0
-#define MX50_PAD_UART3_RXD__ESDHC4_DAT1				0x0a8 0x354 0x754 0x4 0x0
-#define MX50_PAD_UART3_RXD__ESDHC2_CD				0x0a8 0x354 0x740 0x5 0x0
-#define MX50_PAD_UART3_RXD__EIM_WEIM_D_13			0x0a8 0x354 0x820 0x6 0x0
-#define MX50_PAD_UART3_RXD__USBPHY2_DATAOUT_15			0x0a8 0x354 0x000 0x7 0x0
-#define MX50_PAD_UART4_TXD__UART4_TXD_MUX			0x0ac 0x358 0x7dc 0x0 0x0
-#define MX50_PAD_UART4_TXD__GPIO6_16				0x0ac 0x358 0x000 0x1 0x0
-#define MX50_PAD_UART4_TXD__UART3_CTS				0x0ac 0x358 0x7d0 0x2 0x0
-#define MX50_PAD_UART4_TXD__ESDHC1_DAT6				0x0ac 0x358 0x000 0x3 0x0
-#define MX50_PAD_UART4_TXD__ESDHC4_DAT2				0x0ac 0x358 0x758 0x4 0x0
-#define MX50_PAD_UART4_TXD__ESDHC2_LCTL				0x0ac 0x358 0x000 0x5 0x0
-#define MX50_PAD_UART4_TXD__EIM_WEIM_D_14			0x0ac 0x358 0x824 0x6 0x0
-#define MX50_PAD_UART4_RXD__UART4_RXD_MUX			0x0b0 0x35c 0x7dc 0x0 0x1
-#define MX50_PAD_UART4_RXD__GPIO6_17				0x0b0 0x35c 0x000 0x1 0x0
-#define MX50_PAD_UART4_RXD__UART3_RTS				0x0b0 0x35c 0x7d0 0x2 0x1
-#define MX50_PAD_UART4_RXD__ESDHC1_DAT7				0x0b0 0x35c 0x000 0x3 0x0
-#define MX50_PAD_UART4_RXD__ESDHC4_DAT3				0x0b0 0x35c 0x75c 0x4 0x0
-#define MX50_PAD_UART4_RXD__ESDHC1_LCTL				0x0b0 0x35c 0x000 0x5 0x0
-#define MX50_PAD_UART4_RXD__EIM_WEIM_D_15			0x0b0 0x35c 0x828 0x6 0x0
-#define MX50_PAD_CSPI_SCLK__CSPI_SCLK				0x0b4 0x360 0x000 0x0 0x0
-#define MX50_PAD_CSPI_SCLK__GPIO4_8				0x0b4 0x360 0x000 0x1 0x0
-#define MX50_PAD_CSPI_MOSI__CSPI_MOSI				0x0b8 0x364 0x000 0x0 0x0
-#define MX50_PAD_CSPI_MOSI__GPIO4_9				0x0b8 0x364 0x000 0x1 0x0
-#define MX50_PAD_CSPI_MISO__CSPI_MISO				0x0bc 0x368 0x000 0x0 0x0
-#define MX50_PAD_CSPI_MISO__GPIO4_10				0x0bc 0x368 0x000 0x1 0x0
-#define MX50_PAD_CSPI_SS0__CSPI_SS0				0x0c0 0x36c 0x000 0x0 0x0
-#define MX50_PAD_CSPI_SS0__GPIO4_11				0x0c0 0x36c 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK			0x0c4 0x370 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_SCLK__GPIO4_12				0x0c4 0x370 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY				0x0c4 0x370 0x6e8 0x2 0x1
-#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY			0x0c4 0x370 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_SCLK__UART3_RTS				0x0c4 0x370 0x7d0 0x4 0x2
-#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE_6			0x0c4 0x370 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_SCLK__EIM_WEIM_D_8			0x0c4 0x370 0x80c 0x7 0x0
-#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI			0x0c8 0x374 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_MOSI__GPIO4_13				0x0c8 0x374 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1				0x0c8 0x374 0x6ec 0x2 0x1
-#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1			0x0c8 0x374 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_MOSI__UART3_CTS				0x0c8 0x374 0x000 0x4 0x0
-#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE_7			0x0c8 0x374 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_MOSI__EIM_WEIM_D_9			0x0c8 0x374 0x810 0x7 0x0
-#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO			0x0cc 0x378 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_MISO__GPIO4_14				0x0cc 0x378 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_MISO__CSPI_SS2				0x0cc 0x378 0x6f0 0x2 0x1
-#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2			0x0cc 0x378 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_MISO__UART4_RTS				0x0cc 0x378 0x7d8 0x4 0x0
-#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE_8			0x0cc 0x378 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_MISO__EIM_WEIM_D_10			0x0cc 0x378 0x814 0x7 0x0
-#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0				0x0d0 0x37c 0x000 0x0 0x0
-#define MX50_PAD_ECSPI1_SS0__GPIO4_15				0x0d0 0x37c 0x000 0x1 0x0
-#define MX50_PAD_ECSPI1_SS0__CSPI_SS3				0x0d0 0x37c 0x6f4 0x2 0x1
-#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3				0x0d0 0x37c 0x000 0x3 0x0
-#define MX50_PAD_ECSPI1_SS0__UART4_CTS				0x0d0 0x37c 0x000 0x4 0x0
-#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE_9			0x0d0 0x37c 0x000 0x5 0x0
-#define MX50_PAD_ECSPI1_SS0__EIM_WEIM_D_11			0x0d0 0x37c 0x818 0x7 0x0
-#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK			0x0d4 0x380 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_SCLK__GPIO4_16				0x0d4 0x380 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR_RWN			0x0d4 0x380 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY			0x0d4 0x380 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_SCLK__UART5_RTS				0x0d4 0x380 0x7e0 0x4 0x0
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK			0x0d4 0x380 0x000 0x5 0x0
-#define MX50_PAD_ECSPI2_SCLK__EIM_NANDF_CEN_4			0x0d4 0x380 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_SCLK__EIM_WEIM_D_8			0x0d4 0x380 0x80c 0x7 0x1
-#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI			0x0d8 0x384 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_MOSI__GPIO4_17				0x0d8 0x384 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RE_E			0x0d8 0x384 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1			0x0d8 0x384 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_MOSI__UART5_CTS				0x0d8 0x384 0x7e0 0x4 0x1
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_ENABLE			0x0d8 0x384 0x000 0x5 0x0
-#define MX50_PAD_ECSPI2_MOSI__EIM_NANDF_CEN_5			0x0d8 0x384 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_MOSI__EIM_WEIM_D_9			0x0d8 0x384 0x810 0x7 0x1
-#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO			0x0dc 0x388 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_MISO__GPIO4_18				0x0dc 0x388 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS				0x0dc 0x388 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2			0x0dc 0x388 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_MISO__UART5_TXD_MUX			0x0dc 0x388 0x7e4 0x4 0x4
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC			0x0dc 0x388 0x73c 0x5 0x0
-#define MX50_PAD_ECSPI2_MISO__EIM_NANDF_CEN_6			0x0dc 0x388 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_MISO__EIM_WEIM_D_10			0x0dc 0x388 0x814 0x7 0x1
-#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0				0x0e0 0x38c 0x000 0x0 0x0
-#define MX50_PAD_ECSPI2_SS0__GPIO4_19				0x0e0 0x38c 0x000 0x1 0x0
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS				0x0e0 0x38c 0x000 0x2 0x0
-#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS3				0x0e0 0x38c 0x000 0x3 0x0
-#define MX50_PAD_ECSPI2_SS0__UART5_RXD_MUX			0x0e0 0x38c 0x7e4 0x4 0x5
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC			0x0e0 0x38c 0x6f8 0x5 0x0
-#define MX50_PAD_ECSPI2_SS0__EIM_NANDF_CEN_7			0x0e0 0x38c 0x000 0x6 0x0
-#define MX50_PAD_ECSPI2_SS0__EIM_WEIM_D_11			0x0e0 0x38c 0x818 0x7 0x1
-#define MX50_PAD_SD1_CLK__ESDHC1_CLK				0x0e4 0x390 0x000 0x0 0x0
-#define MX50_PAD_SD1_CLK__GPIO5_0				0x0e4 0x390 0x000 0x1 0x0
-#define MX50_PAD_SD1_CLK__CCM_CLKO				0x0e4 0x390 0x000 0x7 0x0
-#define MX50_PAD_SD1_CMD__ESDHC1_CMD				0x0e8 0x394 0x000 0x0 0x0
-#define MX50_PAD_SD1_CMD__GPIO5_1				0x0e8 0x394 0x000 0x1 0x0
-#define MX50_PAD_SD1_CMD__CCM_CLKO2				0x0e8 0x394 0x000 0x7 0x0
-#define MX50_PAD_SD1_D0__ESDHC1_DAT0				0x0ec 0x398 0x000 0x0 0x0
-#define MX50_PAD_SD1_D0__GPIO5_2				0x0ec 0x398 0x000 0x1 0x0
-#define MX50_PAD_SD1_D0__CCM_PLL1_BYP				0x0ec 0x398 0x6dc 0x7 0x0
-#define MX50_PAD_SD1_D1__ESDHC1_DAT1				0x0f0 0x39c 0x000 0x0 0x0
-#define MX50_PAD_SD1_D1__GPIO5_3				0x0f0 0x39c 0x000 0x1 0x0
-#define MX50_PAD_SD1_D1__CCM_PLL2_BYP				0x0f0 0x39c 0x000 0x7 0x0
-#define MX50_PAD_SD1_D2__ESDHC1_DAT2				0x0f4 0x3a0 0x000 0x0 0x0
-#define MX50_PAD_SD1_D2__GPIO5_4				0x0f4 0x3a0 0x000 0x1 0x0
-#define MX50_PAD_SD1_D2__CCM_PLL3_BYP				0x0f4 0x3a0 0x6e4 0x7 0x0
-#define MX50_PAD_SD1_D3__ESDHC1_DAT3				0x0f8 0x3a4 0x000 0x0 0x0
-#define MX50_PAD_SD1_D3__GPIO5_5				0x0f8 0x3a4 0x000 0x1 0x0
-#define MX50_PAD_SD2_CLK__ESDHC2_CLK				0x0fc 0x3a8 0x000 0x0 0x0
-#define MX50_PAD_SD2_CLK__GPIO5_6				0x0fc 0x3a8 0x000 0x1 0x0
-#define MX50_PAD_SD2_CLK__MSHC_SCLK				0x0fc 0x3a8 0x000 0x2 0x0
-#define MX50_PAD_SD2_CMD__ESDHC2_CMD				0x100 0x3ac 0x000 0x0 0x0
-#define MX50_PAD_SD2_CMD__GPIO5_7				0x100 0x3ac 0x000 0x1 0x0
-#define MX50_PAD_SD2_CMD__MSHC_BS				0x100 0x3ac 0x000 0x2 0x0
-#define MX50_PAD_SD2_D0__ESDHC2_DAT0				0x104 0x3b0 0x000 0x0 0x0
-#define MX50_PAD_SD2_D0__GPIO5_8				0x104 0x3b0 0x000 0x1 0x0
-#define MX50_PAD_SD2_D0__MSHC_DATA_0				0x104 0x3b0 0x000 0x2 0x0
-#define MX50_PAD_SD2_D0__KPP_COL_4				0x104 0x3b0 0x790 0x3 0x0
-#define MX50_PAD_SD2_D1__ESDHC2_DAT1				0x108 0x3b4 0x000 0x0 0x0
-#define MX50_PAD_SD2_D1__GPIO5_9				0x108 0x3b4 0x000 0x1 0x0
-#define MX50_PAD_SD2_D1__MSHC_DATA_1				0x108 0x3b4 0x000 0x2 0x0
-#define MX50_PAD_SD2_D1__KPP_ROW_4				0x108 0x3b4 0x7a0 0x3 0x0
-#define MX50_PAD_SD2_D2__ESDHC2_DAT2				0x10c 0x3b8 0x000 0x0 0x0
-#define MX50_PAD_SD2_D2__GPIO5_10				0x10c 0x3b8 0x000 0x1 0x0
-#define MX50_PAD_SD2_D2__MSHC_DATA_2				0x10c 0x3b8 0x000 0x2 0x0
-#define MX50_PAD_SD2_D2__KPP_COL_5				0x10c 0x3b8 0x794 0x3 0x0
-#define MX50_PAD_SD2_D3__ESDHC2_DAT3				0x110 0x3bc 0x000 0x0 0x0
-#define MX50_PAD_SD2_D3__GPIO5_11				0x110 0x3bc 0x000 0x1 0x0
-#define MX50_PAD_SD2_D3__MSHC_DATA_3				0x110 0x3bc 0x000 0x2 0x0
-#define MX50_PAD_SD2_D3__KPP_ROW_5				0x110 0x3bc 0x7a4 0x3 0x0
-#define MX50_PAD_SD2_D4__ESDHC2_DAT4				0x114 0x3c0 0x000 0x0 0x0
-#define MX50_PAD_SD2_D4__GPIO5_12				0x114 0x3c0 0x000 0x1 0x0
-#define MX50_PAD_SD2_D4__AUDMUX_AUD4_RXFS			0x114 0x3c0 0x6d0 0x2 0x0
-#define MX50_PAD_SD2_D4__KPP_COL_6				0x114 0x3c0 0x798 0x3 0x0
-#define MX50_PAD_SD2_D4__EIM_WEIM_D_0				0x114 0x3c0 0x7ec 0x4 0x0
-#define MX50_PAD_SD2_D4__CCM_CCM_OUT_0				0x114 0x3c0 0x000 0x7 0x0
-#define MX50_PAD_SD2_D5__ESDHC2_DAT5				0x118 0x3c4 0x000 0x0 0x0
-#define MX50_PAD_SD2_D5__GPIO5_13				0x118 0x3c4 0x000 0x1 0x0
-#define MX50_PAD_SD2_D5__AUDMUX_AUD4_RXC			0x118 0x3c4 0x6cc 0x2 0x0
-#define MX50_PAD_SD2_D5__KPP_ROW_6				0x118 0x3c4 0x7a8 0x3 0x0
-#define MX50_PAD_SD2_D5__EIM_WEIM_D_1				0x118 0x3c4 0x7f0 0x4 0x0
-#define MX50_PAD_SD2_D5__CCM_CCM_OUT_1				0x118 0x3c4 0x000 0x7 0x0
-#define MX50_PAD_SD2_D6__ESDHC2_DAT6				0x11c 0x3c8 0x000 0x0 0x0
-#define MX50_PAD_SD2_D6__GPIO5_14				0x11c 0x3c8 0x000 0x1 0x0
-#define MX50_PAD_SD2_D6__AUDMUX_AUD4_RXD			0x11c 0x3c8 0x6c4 0x2 0x0
-#define MX50_PAD_SD2_D6__KPP_COL_7				0x11c 0x3c8 0x79c 0x3 0x0
-#define MX50_PAD_SD2_D6__EIM_WEIM_D_2				0x11c 0x3c8 0x7f4 0x4 0x0
-#define MX50_PAD_SD2_D6__CCM_CCM_OUT_2				0x11c 0x3c8 0x000 0x7 0x0
-#define MX50_PAD_SD2_D7__ESDHC2_DAT7				0x120 0x3cc 0x000 0x0 0x0
-#define MX50_PAD_SD2_D7__GPIO5_15				0x120 0x3cc 0x000 0x1 0x0
-#define MX50_PAD_SD2_D7__AUDMUX_AUD4_TXFS			0x120 0x3cc 0x6d8 0x2 0x0
-#define MX50_PAD_SD2_D7__KPP_ROW_7				0x120 0x3cc 0x7ac 0x3 0x0
-#define MX50_PAD_SD2_D7__EIM_WEIM_D_3				0x120 0x3cc 0x7f8 0x4 0x0
-#define MX50_PAD_SD2_D7__CCM_STOP				0x120 0x3cc 0x000 0x7 0x0
-#define MX50_PAD_SD2_WP__ESDHC2_WP				0x124 0x3d0 0x744 0x0 0x1
-#define MX50_PAD_SD2_WP__GPIO5_16				0x124 0x3d0 0x000 0x1 0x0
-#define MX50_PAD_SD2_WP__AUDMUX_AUD4_TXD			0x124 0x3d0 0x6c8 0x2 0x0
-#define MX50_PAD_SD2_WP__EIM_WEIM_D_4				0x124 0x3d0 0x7fc 0x4 0x0
-#define MX50_PAD_SD2_WP__CCM_WAIT				0x124 0x3d0 0x000 0x7 0x0
-#define MX50_PAD_SD2_CD__ESDHC2_CD				0x128 0x3d4 0x740 0x0 0x1
-#define MX50_PAD_SD2_CD__GPIO5_17				0x128 0x3d4 0x000 0x1 0x0
-#define MX50_PAD_SD2_CD__AUDMUX_AUD4_TXC			0x128 0x3d4 0x6d4 0x2 0x0
-#define MX50_PAD_SD2_CD__EIM_WEIM_D_5				0x128 0x3d4 0x800 0x4 0x0
-#define MX50_PAD_SD2_CD__CCM_REF_EN_B				0x128 0x3d4 0x000 0x7 0x0
-#define MX50_PAD_DISP_D0__ELCDIF_DAT_0				0x12c 0x40c 0x6fc 0x0 0x0
-#define MX50_PAD_DISP_D0__GPIO2_0				0x12c 0x40c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D0__FEC_TX_CLK				0x12c 0x40c 0x78c 0x2 0x0
-#define MX50_PAD_DISP_D0__EIM_WEIM_A_16				0x12c 0x40c 0x000 0x3 0x0
-#define MX50_PAD_DISP_D0__SDMA_DEBUG_PC_0			0x12c 0x40c 0x000 0x6 0x0
-#define MX50_PAD_DISP_D0__USBPHY1_VSTATUS_0			0x12c 0x40c 0x000 0x7 0x0
-#define MX50_PAD_DISP_D1__ELCDIF_DAT_1				0x130 0x410 0x700 0x0 0x0
-#define MX50_PAD_DISP_D1__GPIO2_1				0x130 0x410 0x000 0x1 0x0
-#define MX50_PAD_DISP_D1__FEC_RX_ERR				0x130 0x410 0x788 0x2 0x0
-#define MX50_PAD_DISP_D1__EIM_WEIM_A_17				0x130 0x410 0x000 0x3 0x0
-#define MX50_PAD_DISP_D1__SDMA_DEBUG_PC_1			0x130 0x410 0x000 0x6 0x0
-#define MX50_PAD_DISP_D1__USBPHY1_VSTATUS_1			0x130 0x410 0x000 0x7 0x0
-#define MX50_PAD_DISP_D2__ELCDIF_DAT_2				0x134 0x414 0x704 0x0 0x0
-#define MX50_PAD_DISP_D2__GPIO2_2				0x134 0x414 0x000 0x1 0x0
-#define MX50_PAD_DISP_D2__FEC_RX_DV				0x134 0x414 0x784 0x2 0x0
-#define MX50_PAD_DISP_D2__EIM_WEIM_A_18				0x134 0x414 0x000 0x3 0x0
-#define MX50_PAD_DISP_D2__SDMA_DEBUG_PC_2			0x134 0x414 0x000 0x6 0x0
-#define MX50_PAD_DISP_D2__USBPHY1_VSTATUS_2			0x134 0x414 0x000 0x7 0x0
-#define MX50_PAD_DISP_D3__ELCDIF_DAT_3				0x138 0x418 0x708 0x0 0x0
-#define MX50_PAD_DISP_D3__GPIO2_3				0x138 0x418 0x000 0x1 0x0
-#define MX50_PAD_DISP_D3__FEC_RDATA_1				0x138 0x418 0x77c 0x2 0x0
-#define MX50_PAD_DISP_D3__EIM_WEIM_A_19				0x138 0x418 0x000 0x3 0x0
-#define MX50_PAD_DISP_D3__FEC_COL				0x138 0x418 0x770 0x4 0x1
-#define MX50_PAD_DISP_D3__SDMA_DEBUG_PC_3			0x138 0x418 0x000 0x6 0x0
-#define MX50_PAD_DISP_D3__USBPHY1_VSTATUS_3			0x138 0x418 0x000 0x7 0x0
-#define MX50_PAD_DISP_D4__ELCDIF_DAT_4				0x13c 0x41c 0x70c 0x0 0x0
-#define MX50_PAD_DISP_D4__GPIO2_4				0x13c 0x41c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D4__FEC_RDATA_0				0x13c 0x41c 0x778 0x2 0x0
-#define MX50_PAD_DISP_D4__EIM_WEIM_A_20				0x13c 0x41c 0x000 0x3 0x0
-#define MX50_PAD_DISP_D4__SDMA_DEBUG_PC_4			0x13c 0x41c 0x000 0x6 0x0
-#define MX50_PAD_DISP_D4__USBPHY1_VSTATUS_4			0x13c 0x41c 0x000 0x7 0x0
-#define MX50_PAD_DISP_D5__ELCDIF_DAT_5				0x140 0x420 0x710 0x0 0x0
-#define MX50_PAD_DISP_D5__GPIO2_5				0x140 0x420 0x000 0x1 0x0
-#define MX50_PAD_DISP_D5__FEC_TX_EN				0x140 0x420 0x000 0x2 0x0
-#define MX50_PAD_DISP_D5__EIM_WEIM_A_21				0x140 0x420 0x000 0x3 0x0
-#define MX50_PAD_DISP_D5__SDMA_DEBUG_PC_5			0x140 0x420 0x000 0x6 0x0
-#define MX50_PAD_DISP_D5__USBPHY1_VSTATUS_5			0x140 0x420 0x000 0x7 0x0
-#define MX50_PAD_DISP_D6__ELCDIF_DAT_6				0x144 0x424 0x714 0x0 0x0
-#define MX50_PAD_DISP_D6__GPIO2_6				0x144 0x424 0x000 0x1 0x0
-#define MX50_PAD_DISP_D6__FEC_TDATA_1				0x144 0x424 0x000 0x2 0x0
-#define MX50_PAD_DISP_D6__EIM_WEIM_A_22				0x144 0x424 0x000 0x3 0x0
-#define MX50_PAD_DISP_D6__FEC_RX_CLK				0x144 0x424 0x780 0x4 0x1
-#define MX50_PAD_DISP_D6__SDMA_DEBUG_PC_6			0x144 0x424 0x000 0x6 0x0
-#define MX50_PAD_DISP_D6__USBPHY1_VSTATUS_6			0x144 0x424 0x000 0x7 0x0
-#define MX50_PAD_DISP_D7__ELCDIF_DAT_7				0x148 0x428 0x718 0x0 0x0
-#define MX50_PAD_DISP_D7__GPIO2_7				0x148 0x428 0x000 0x1 0x0
-#define MX50_PAD_DISP_D7__FEC_TDATA_0				0x148 0x428 0x000 0x2 0x0
-#define MX50_PAD_DISP_D7__EIM_WEIM_A_23				0x148 0x428 0x000 0x3 0x0
-#define MX50_PAD_DISP_D7__SDMA_DEBUG_PC_7			0x148 0x428 0x000 0x6 0x0
-#define MX50_PAD_DISP_D7__USBPHY1_VSTATUS_7			0x148 0x428 0x000 0x7 0x0
-#define MX50_PAD_DISP_WR__ELCDIF_WR_RWN				0x14c 0x42c 0x000 0x0 0x0
-#define MX50_PAD_DISP_WR__GPIO2_16				0x14c 0x42c 0x000 0x1 0x0
-#define MX50_PAD_DISP_WR__ELCDIF_DOTCLK				0x14c 0x42c 0x000 0x2 0x0
-#define MX50_PAD_DISP_WR__EIM_WEIM_A_24				0x14c 0x42c 0x000 0x3 0x0
-#define MX50_PAD_DISP_WR__SDMA_DEBUG_PC_8			0x14c 0x42c 0x000 0x6 0x0
-#define MX50_PAD_DISP_WR__USBPHY1_AVALID			0x14c 0x42c 0x000 0x7 0x0
-#define MX50_PAD_DISP_RD__ELCDIF_RD_E				0x150 0x430 0x000 0x0 0x0
-#define MX50_PAD_DISP_RD__GPIO2_19				0x150 0x430 0x000 0x1 0x0
-#define MX50_PAD_DISP_RD__ELCDIF_ENABLE				0x150 0x430 0x000 0x2 0x0
-#define MX50_PAD_DISP_RD__EIM_WEIM_A_25				0x150 0x430 0x000 0x3 0x0
-#define MX50_PAD_DISP_RD__SDMA_DEBUG_PC_9			0x150 0x430 0x000 0x6 0x0
-#define MX50_PAD_DISP_RD__USBPHY1_BVALID			0x150 0x430 0x000 0x7 0x0
-#define MX50_PAD_DISP_RS__ELCDIF_RS				0x154 0x434 0x000 0x0 0x0
-#define MX50_PAD_DISP_RS__GPIO2_17				0x154 0x434 0x000 0x1 0x0
-#define MX50_PAD_DISP_RS__ELCDIF_VSYNC				0x154 0x434 0x73c 0x2 0x1
-#define MX50_PAD_DISP_RS__EIM_WEIM_A_26				0x154 0x434 0x000 0x3 0x0
-#define MX50_PAD_DISP_RS__SDMA_DEBUG_PC_10			0x154 0x434 0x000 0x6 0x0
-#define MX50_PAD_DISP_RS__USBPHY1_ENDSESSION			0x154 0x434 0x000 0x7 0x0
-#define MX50_PAD_DISP_CS__ELCDIF_CS				0x158 0x438 0x000 0x0 0x0
-#define MX50_PAD_DISP_CS__GPIO2_21				0x158 0x438 0x000 0x1 0x0
-#define MX50_PAD_DISP_CS__ELCDIF_HSYNC				0x158 0x438 0x6f8 0x2 0x1
-#define MX50_PAD_DISP_CS__EIM_WEIM_A_27				0x158 0x438 0x000 0x3 0x0
-#define MX50_PAD_DISP_CS__EIM_WEIM_CS_3				0x158 0x438 0x000 0x4 0x0
-#define MX50_PAD_DISP_CS__SDMA_DEBUG_PC_11			0x158 0x438 0x000 0x6 0x0
-#define MX50_PAD_DISP_CS__USBPHY1_IDDIG				0x158 0x438 0x000 0x7 0x0
-#define MX50_PAD_DISP_BUSY__ELCDIF_BUSY				0x15c 0x43c 0x6f8 0x0 0x2
-#define MX50_PAD_DISP_BUSY__GPIO2_18				0x15c 0x43c 0x000 0x1 0x0
-#define MX50_PAD_DISP_BUSY__EIM_WEIM_CS_3			0x15c 0x43c 0x000 0x4 0x0
-#define MX50_PAD_DISP_BUSY__SDMA_DEBUG_PC_12			0x15c 0x43c 0x000 0x6 0x0
-#define MX50_PAD_DISP_BUSY__USBPHY2_HOSTDISCONNECT		0x15c 0x43c 0x000 0x7 0x0
-#define MX50_PAD_DISP_RESET__ELCDIF_RESET			0x160 0x440 0x000 0x0 0x0
-#define MX50_PAD_DISP_RESET__GPIO2_20				0x160 0x440 0x000 0x1 0x0
-#define MX50_PAD_DISP_RESET__EIM_WEIM_CS_3			0x160 0x440 0x000 0x4 0x0
-#define MX50_PAD_DISP_RESET__SDMA_DEBUG_PC_13			0x160 0x440 0x000 0x6 0x0
-#define MX50_PAD_DISP_RESET__USBPHY2_BISTOK			0x160 0x440 0x000 0x7 0x0
-#define MX50_PAD_SD3_CMD__ESDHC3_CMD				0x164 0x444 0x000 0x0 0x0
-#define MX50_PAD_SD3_CMD__GPIO5_18				0x164 0x444 0x000 0x1 0x0
-#define MX50_PAD_SD3_CMD__EIM_NANDF_WRN				0x164 0x444 0x000 0x2 0x0
-#define MX50_PAD_SD3_CMD__SSP_CMD				0x164 0x444 0x000 0x3 0x0
-#define MX50_PAD_SD3_CLK__ESDHC3_CLK				0x168 0x448 0x000 0x0 0x0
-#define MX50_PAD_SD3_CLK__GPIO5_19				0x168 0x448 0x000 0x1 0x0
-#define MX50_PAD_SD3_CLK__EIM_NANDF_RDN				0x168 0x448 0x000 0x2 0x0
-#define MX50_PAD_SD3_CLK__SSP_CLK				0x168 0x448 0x000 0x3 0x0
-#define MX50_PAD_SD3_D0__ESDHC3_DAT0				0x16c 0x44c 0x000 0x0 0x0
-#define MX50_PAD_SD3_D0__GPIO5_20				0x16c 0x44c 0x000 0x1 0x0
-#define MX50_PAD_SD3_D0__EIM_NANDF_D_4				0x16c 0x44c 0x000 0x2 0x0
-#define MX50_PAD_SD3_D0__SSP_D0					0x16c 0x44c 0x000 0x3 0x0
-#define MX50_PAD_SD3_D0__CCM_PLL1_BYP				0x16c 0x44c 0x6dc 0x7 0x1
-#define MX50_PAD_SD3_D1__ESDHC3_DAT1				0x170 0x450 0x000 0x0 0x0
-#define MX50_PAD_SD3_D1__GPIO5_21				0x170 0x450 0x000 0x1 0x0
-#define MX50_PAD_SD3_D1__EIM_NANDF_D_5				0x170 0x450 0x000 0x2 0x0
-#define MX50_PAD_SD3_D1__SSP_D1					0x170 0x450 0x000 0x3 0x0
-#define MX50_PAD_SD3_D1__CCM_PLL2_BYP				0x170 0x450 0x000 0x7 0x0
-#define MX50_PAD_SD3_D2__ESDHC3_DAT2				0x174 0x454 0x000 0x0 0x0
-#define MX50_PAD_SD3_D2__GPIO5_22				0x174 0x454 0x000 0x1 0x0
-#define MX50_PAD_SD3_D2__EIM_NANDF_D_6				0x174 0x454 0x000 0x2 0x0
-#define MX50_PAD_SD3_D2__SSP_D2					0x174 0x454 0x000 0x3 0x0
-#define MX50_PAD_SD3_D2__CCM_PLL3_BYP				0x174 0x454 0x6e4 0x7 0x1
-#define MX50_PAD_SD3_D3__ESDHC3_DAT3				0x178 0x458 0x000 0x0 0x0
-#define MX50_PAD_SD3_D3__GPIO5_23				0x178 0x458 0x000 0x1 0x0
-#define MX50_PAD_SD3_D3__EIM_NANDF_D_7				0x178 0x458 0x000 0x2 0x0
-#define MX50_PAD_SD3_D3__SSP_D3					0x178 0x458 0x000 0x3 0x0
-#define MX50_PAD_SD3_D4__ESDHC3_DAT4				0x17c 0x45c 0x000 0x0 0x0
-#define MX50_PAD_SD3_D4__GPIO5_24				0x17c 0x45c 0x000 0x1 0x0
-#define MX50_PAD_SD3_D4__EIM_NANDF_D_0				0x17c 0x45c 0x000 0x2 0x0
-#define MX50_PAD_SD3_D4__SSP_D4					0x17c 0x45c 0x000 0x3 0x0
-#define MX50_PAD_SD3_D5__ESDHC3_DAT5				0x180 0x460 0x000 0x0 0x0
-#define MX50_PAD_SD3_D5__GPIO5_25				0x180 0x460 0x000 0x1 0x0
-#define MX50_PAD_SD3_D5__EIM_NANDF_D_1				0x180 0x460 0x000 0x2 0x0
-#define MX50_PAD_SD3_D5__SSP_D5					0x180 0x460 0x000 0x3 0x0
-#define MX50_PAD_SD3_D6__ESDHC3_DAT6				0x184 0x464 0x000 0x0 0x0
-#define MX50_PAD_SD3_D6__GPIO5_26				0x184 0x464 0x000 0x1 0x0
-#define MX50_PAD_SD3_D6__EIM_NANDF_D_2				0x184 0x464 0x000 0x2 0x0
-#define MX50_PAD_SD3_D6__SSP_D6					0x184 0x464 0x000 0x3 0x0
-#define MX50_PAD_SD3_D7__ESDHC3_DAT7				0x188 0x468 0x000 0x0 0x0
-#define MX50_PAD_SD3_D7__GPIO5_27				0x188 0x468 0x000 0x1 0x0
-#define MX50_PAD_SD3_D7__EIM_NANDF_D_3				0x188 0x468 0x000 0x2 0x0
-#define MX50_PAD_SD3_D7__SSP_D7					0x188 0x468 0x000 0x3 0x0
-#define MX50_PAD_SD3_WP__ESDHC3_WP				0x18c 0x46C 0x000 0x0 0x0
-#define MX50_PAD_SD3_WP__GPIO5_28				0x18c 0x46C 0x000 0x1 0x0
-#define MX50_PAD_SD3_WP__EIM_NANDF_RESETN			0x18c 0x46C 0x000 0x2 0x0
-#define MX50_PAD_SD3_WP__SSP_CD					0x18c 0x46C 0x000 0x3 0x0
-#define MX50_PAD_SD3_WP__ESDHC4_LCTL				0x18c 0x46C 0x000 0x4 0x0
-#define MX50_PAD_SD3_WP__EIM_WEIM_CS_3				0x18c 0x46C 0x000 0x5 0x0
-#define MX50_PAD_DISP_D8__ELCDIF_DAT_8				0x190 0x470 0x71c 0x0 0x0
-#define MX50_PAD_DISP_D8__GPIO2_8				0x190 0x470 0x000 0x1 0x0
-#define MX50_PAD_DISP_D8__EIM_NANDF_CLE				0x190 0x470 0x000 0x2 0x0
-#define MX50_PAD_DISP_D8__ESDHC1_LCTL				0x190 0x470 0x000 0x3 0x0
-#define MX50_PAD_DISP_D8__ESDHC4_CMD				0x190 0x470 0x74c 0x4 0x2
-#define MX50_PAD_DISP_D8__KPP_COL_4				0x190 0x470 0x790 0x5 0x1
-#define MX50_PAD_DISP_D8__FEC_TX_CLK				0x190 0x470 0x78c 0x6 0x1
-#define MX50_PAD_DISP_D8__USBPHY1_DATAOUT_0			0x190 0x470 0x000 0x7 0x0
-#define MX50_PAD_DISP_D9__ELCDIF_DAT_9				0x194 0x474 0x720 0x0 0x0
-#define MX50_PAD_DISP_D9__GPIO2_9				0x194 0x474 0x000 0x1 0x0
-#define MX50_PAD_DISP_D9__EIM_NANDF_ALE				0x194 0x474 0x000 0x2 0x0
-#define MX50_PAD_DISP_D9__ESDHC2_LCTL				0x194 0x474 0x000 0x3 0x0
-#define MX50_PAD_DISP_D9__ESDHC4_CLK				0x194 0x474 0x748 0x4 0x2
-#define MX50_PAD_DISP_D9__KPP_ROW_4				0x194 0x474 0x7a0 0x5 0x1
-#define MX50_PAD_DISP_D9__FEC_RX_ER				0x194 0x474 0x788 0x6 0x1
-#define MX50_PAD_DISP_D9__USBPHY1_DATAOUT_1			0x194 0x474 0x000 0x7 0x0
-#define MX50_PAD_DISP_D10__ELCDIF_DAT_10			0x198 0x478 0x724 0x0 0x0
-#define MX50_PAD_DISP_D10__GPIO2_10				0x198 0x478 0x000 0x1 0x0
-#define MX50_PAD_DISP_D10__EIM_NANDF_CEN_0			0x198 0x478 0x000 0x2 0x0
-#define MX50_PAD_DISP_D10__ESDHC3_LCTL				0x198 0x478 0x000 0x3 0x0
-#define MX50_PAD_DISP_D10__ESDHC4_DAT0				0x198 0x478 0x000 0x4 0x0
-#define MX50_PAD_DISP_D10__KPP_COL_5				0x198 0x478 0x794 0x5 0x1
-#define MX50_PAD_DISP_D10__FEC_RX_DV				0x198 0x478 0x784 0x6 0x1
-#define MX50_PAD_DISP_D10__USBPHY1_DATAOUT_2			0x198 0x478 0x000 0x7 0x0
-#define MX50_PAD_DISP_D11__ELCDIF_DAT_11			0x19c 0x47c 0x728 0x0 0x0
-#define MX50_PAD_DISP_D11__GPIO2_11				0x19c 0x47c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D11__EIM_NANDF_CEN_1			0x19c 0x47c 0x000 0x2 0x0
-#define MX50_PAD_DISP_D11__ESDHC4_DAT1				0x19c 0x47c 0x754 0x4 0x1
-#define MX50_PAD_DISP_D11__KPP_ROW_5				0x19c 0x47c 0x7a4 0x5 0x1
-#define MX50_PAD_DISP_D11__FEC_RDATA_1				0x19c 0x47c 0x77c 0x6 0x1
-#define MX50_PAD_DISP_D11__USBPHY1_DATAOUT_3			0x19c 0x47c 0x000 0x7 0x0
-#define MX50_PAD_DISP_D12__ELCDIF_DAT_12			0x1a0 0x480 0x72c 0x0 0x0
-#define MX50_PAD_DISP_D12__GPIO2_12				0x1a0 0x480 0x000 0x1 0x0
-#define MX50_PAD_DISP_D12__EIM_NANDF_CEN_2			0x1a0 0x480 0x000 0x2 0x0
-#define MX50_PAD_DISP_D12__ESDHC1_CD				0x1a0 0x480 0x000 0x3 0x0
-#define MX50_PAD_DISP_D12__ESDHC4_DAT2				0x1a0 0x480 0x758 0x4 0x1
-#define MX50_PAD_DISP_D12__KPP_COL_6				0x1a0 0x480 0x798 0x5 0x1
-#define MX50_PAD_DISP_D12__FEC_RDATA_0				0x1a0 0x480 0x778 0x6 0x1
-#define MX50_PAD_DISP_D12__USBPHY1_DATAOUT_4			0x1a0 0x480 0x000 0x7 0x0
-#define MX50_PAD_DISP_D13__ELCDIF_DAT_13			0x1a4 0x484 0x730 0x0 0x0
-#define MX50_PAD_DISP_D13__GPIO2_13				0x1a4 0x484 0x000 0x1 0x0
-#define MX50_PAD_DISP_D13__EIM_NANDF_CEN_3			0x1a4 0x484 0x000 0x2 0x0
-#define MX50_PAD_DISP_D13__ESDHC3_CD				0x1a4 0x484 0x000 0x3 0x0
-#define MX50_PAD_DISP_D13__ESDHC4_DAT3				0x1a4 0x484 0x75c 0x4 0x1
-#define MX50_PAD_DISP_D13__KPP_ROW_6				0x1a4 0x484 0x7a8 0x5 0x1
-#define MX50_PAD_DISP_D13__FEC_TX_EN				0x1a4 0x484 0x000 0x6 0x0
-#define MX50_PAD_DISP_D13__USBPHY1_DATAOUT_5			0x1a4 0x484 0x000 0x7 0x0
-#define MX50_PAD_DISP_D14__ELCDIF_DAT_14			0x1a8 0x488 0x734 0x0 0x0
-#define MX50_PAD_DISP_D14__GPIO2_14				0x1a8 0x488 0x000 0x1 0x0
-#define MX50_PAD_DISP_D14__EIM_NANDF_READY0			0x1a8 0x488 0x7b4 0x2 0x1
-#define MX50_PAD_DISP_D14__ESDHC1_WP				0x1a8 0x488 0x000 0x3 0x0
-#define MX50_PAD_DISP_D14__ESDHC4_WP				0x1a8 0x488 0x000 0x4 0x0
-#define MX50_PAD_DISP_D14__KPP_COL_7				0x1a8 0x488 0x79c 0x5 0x1
-#define MX50_PAD_DISP_D14__FEC_TDATA_1				0x1a8 0x488 0x000 0x6 0x0
-#define MX50_PAD_DISP_D14__USBPHY1_DATAOUT_6			0x1a8 0x488 0x000 0x7 0x0
-#define MX50_PAD_DISP_D15__ELCDIF_DAT_15			0x1ac 0x48c 0x738 0x0 0x0
-#define MX50_PAD_DISP_D15__GPIO2_15				0x1ac 0x48c 0x000 0x1 0x0
-#define MX50_PAD_DISP_D15__EIM_NANDF_DQS			0x1ac 0x48c 0x7b0 0x2 0x1
-#define MX50_PAD_DISP_D15__ESDHC3_RST				0x1ac 0x48c 0x000 0x3 0x0
-#define MX50_PAD_DISP_D15__ESDHC4_CD				0x1ac 0x48c 0x000 0x4 0x0
-#define MX50_PAD_DISP_D15__KPP_ROW_7				0x1ac 0x48c 0x7ac 0x5 0x1
-#define MX50_PAD_DISP_D15__FEC_TDATA_0				0x1ac 0x48c 0x000 0x6 0x0
-#define MX50_PAD_DISP_D15__USBPHY1_DATAOUT_7			0x1ac 0x48c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D0__EPDC_SDDO_0				0x1b0 0x54c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D0__GPIO3_0				0x1b0 0x54c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D0__EIM_WEIM_D_0				0x1b0 0x54c 0x7ec 0x2 0x1
-#define MX50_PAD_EPDC_D0__ELCDIF_RS				0x1b0 0x54c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D0__ELCDIF_DOTCLK				0x1b0 0x54c 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D0__SDMA_DEBUG_EVT_CHN_LINES_0		0x1b0 0x54c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D0__USBPHY2_DATAOUT_0			0x1b0 0x54c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D1__EPDC_SDDO_1				0x1b4 0x550 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D1__GPIO3_1				0x1b4 0x550 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D1__EIM_WEIM_D_1				0x1b4 0x550 0x7f0 0x2 0x1
-#define MX50_PAD_EPDC_D1__ELCDIF_CS				0x1b4 0x550 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D1__ELCDIF_ENABLE				0x1b4 0x550 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D1__SDMA_DEBUG_EVT_CHN_LINES_1		0x1b4 0x550 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D1__USBPHY2_DATAOUT_1			0x1b4 0x550 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D2__EPDC_SDDO_2				0x1b8 0x554 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D2__GPIO3_2				0x1b8 0x554 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D2__EIM_WEIM_D_2				0x1b8 0x554 0x7f4 0x2 0x1
-#define MX50_PAD_EPDC_D2__ELCDIF_WR_RWN				0x1b8 0x554 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC				0x1b8 0x554 0x73c 0x4 0x2
-#define MX50_PAD_EPDC_D2__SDMA_DEBUG_EVT_CHN_LINES_2		0x1b8 0x554 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D2__USBPHY2_DATAOUT_2			0x1b8 0x554 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D3__EPDC_SDDO_3				0x1bc 0x558 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D3__GPIO3_3				0x1bc 0x558 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D3__EIM_WEIM_D_3				0x1bc 0x558 0x7f8 0x2 0x1
-#define MX50_PAD_EPDC_D3__ELCDIF_RD_E				0x1bc 0x558 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC				0x1bc 0x558 0x6f8 0x4 0x3
-#define MX50_PAD_EPDC_D3__SDMA_DEBUG_EVT_CHN_LINES_3		0x1bc 0x558 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D3__USBPHY2_DATAOUT_3			0x1bc 0x558 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D4__EPDC_SDDO_4				0x1c0 0x55c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D4__GPIO3_4				0x1c0 0x55c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D4__EIM_WEIM_D_4				0x1c0 0x55c 0x7fc 0x2 0x1
-#define MX50_PAD_EPDC_D4__SDMA_DEBUG_EVT_CHN_LINES_4		0x1c0 0x55c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D4__USBPHY2_DATAOUT_4			0x1c0 0x55c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D5__EPDC_SDDO_5				0x1c4 0x560 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D5__GPIO3_5				0x1c4 0x560 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D5__EIM_WEIM_D_5				0x1c4 0x560 0x800 0x2 0x1
-#define MX50_PAD_EPDC_D5__SDMA_DEBUG_EVT_CHN_LINES_5		0x1c4 0x560 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D5__USBPHY2_DATAOUT_5			0x1c4 0x560 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D6__EPDC_SDDO_6				0x1c8 0x564 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D6__GPIO3_6				0x1c8 0x564 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D6__EIM_WEIM_D_6				0x1c8 0x564 0x804 0x2 0x1
-#define MX50_PAD_EPDC_D6__SDMA_DEBUG_EVT_CHN_LINES_6		0x1c8 0x564 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D6__USBPHY2_DATAOUT_6			0x1c8 0x564 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D7__EPDC_SDDO_7				0x1cc 0x568 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D7__GPIO3_7				0x1cc 0x568 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D7__EIM_WEIM_D_7				0x1cc 0x568 0x808 0x2 0x1
-#define MX50_PAD_EPDC_D7__SDMA_DEBUG_EVT_CHN_LINES_7		0x1cc 0x568 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D7__USBPHY2_DATAOUT_7			0x1cc 0x568 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D8__EPDC_SDDO_8				0x1d0 0x56c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D8__GPIO3_8				0x1d0 0x56c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D8__EIM_WEIM_D_8				0x1d0 0x56c 0x80c 0x2 0x2
-#define MX50_PAD_EPDC_D8__ELCDIF_DAT_24				0x1d0 0x56c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D8__SDMA_DEBUG_MATCHED_DMBUS		0x1d0 0x56c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D8__USBPHY2_VSTATUS_0			0x1d0 0x56c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D9__EPDC_SDDO_9				0x1d4 0x570 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D9__GPIO3_9				0x1d4 0x570 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D9__EIM_WEIM_D_9				0x1d4 0x570 0x810 0x2 0x2
-#define MX50_PAD_EPDC_D9__ELCDIF_DAT_25				0x1d4 0x570 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D9__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x1d4 0x570 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D9__USBPHY2_VSTATUS_1			0x1d4 0x570 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D10__EPDC_SDDO_10				0x1d8 0x574 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D10__GPIO3_10				0x1d8 0x574 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D10__EIM_WEIM_D_10			0x1d8 0x574 0x814 0x2 0x2
-#define MX50_PAD_EPDC_D10__ELCDIF_DAT_26			0x1d8 0x574 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D10__SDMA_DEBUG_EVENT_CHANNEL_0		0x1d8 0x574 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D10__USBPHY2_VSTATUS_2			0x1d8 0x574 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D11__EPDC_SDDO_11				0x1dc 0x578 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D11__GPIO3_11				0x1dc 0x578 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D11__EIM_WEIM_D_11			0x1dc 0x578 0x818 0x2 0x2
-#define MX50_PAD_EPDC_D11__ELCDIF_DAT_27			0x1dc 0x578 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D11__SDMA_DEBUG_EVENT_CHANNEL_1		0x1dc 0x578 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D11__USBPHY2_VSTATUS_3			0x1dc 0x578 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D12__EPDC_SDDO_12				0x1e0 0x57c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D12__GPIO3_12				0x1e0 0x57c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D12__EIM_WEIM_D_12			0x1e0 0x57c 0x81c 0x2 0x1
-#define MX50_PAD_EPDC_D12__ELCDIF_DAT_28			0x1e0 0x57c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D12__SDMA_DEBUG_EVENT_CHANNEL_2		0x1e0 0x57c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D12__USBPHY2_VSTATUS_4			0x1e0 0x57c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D13__EPDC_SDDO_13				0x1e4 0x580 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D13__GPIO3_13				0x1e4 0x580 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D13__EIM_WEIM_D_13			0x1e4 0x580 0x820 0x2 0x1
-#define MX50_PAD_EPDC_D13__ELCDIF_DAT_29			0x1e4 0x580 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D13__SDMA_DEBUG_EVENT_CHANNEL_3		0x1e4 0x580 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D13__USBPHY2_VSTATUS_5			0x1e4 0x580 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D14__EPDC_SDDO_14				0x1e8 0x584 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D14__GPIO3_14				0x1e8 0x584 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D14__EIM_WEIM_D_14			0x1e8 0x584 0x824 0x2 0x1
-#define MX50_PAD_EPDC_D14__ELCDIF_DAT_30			0x1e8 0x584 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D14__AUDMUX_AUD6_TXD			0x1e8 0x584 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D14__SDMA_DEBUG_EVENT_CHANNEL_4		0x1e8 0x584 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D14__USBPHY2_VSTATUS_6			0x1e8 0x584 0x000 0x7 0x0
-#define MX50_PAD_EPDC_D15__EPDC_SDDO_15				0x1ec 0x588 0x000 0x0 0x0
-#define MX50_PAD_EPDC_D15__GPIO3_15				0x1ec 0x588 0x000 0x1 0x0
-#define MX50_PAD_EPDC_D15__EIM_WEIM_D_15			0x1ec 0x588 0x828 0x2 0x1
-#define MX50_PAD_EPDC_D15__ELCDIF_DAT_31			0x1ec 0x588 0x000 0x3 0x0
-#define MX50_PAD_EPDC_D15__AUDMUX_AUD6_TXC			0x1ec 0x588 0x000 0x4 0x0
-#define MX50_PAD_EPDC_D15__SDMA_DEBUG_EVENT_CHANNEL_5		0x1ec 0x588 0x000 0x6 0x0
-#define MX50_PAD_EPDC_D15__USBPHY2_VSTATUS_7			0x1ec 0x588 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK				0x1f0 0x58c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDCLK__GPIO3_16				0x1f0 0x58c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDCLK__EIM_WEIM_D_16			0x1f0 0x58c 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDCLK__ELCDIF_DAT_16			0x1f0 0x58c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDCLK__AUDMUX_AUD6_TXFS			0x1f0 0x58c 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDCLK__SDMA_DEBUG_CORE_STATE_0		0x1f0 0x58c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDCLK__USBPHY2_BISTOK			0x1f0 0x58c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDSP__EPCD_GDSP				0x1f4 0x590 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDSP__GPIO3_17				0x1f4 0x590 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDSP__EIM_WEIM_D_17			0x1f4 0x590 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDSP__ELCDIF_DAT_17			0x1f4 0x590 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDSP__AUDMUX_AUD6_RXD			0x1f4 0x590 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDSP__SDMA_DEBUG_CORE_STATE_1		0x1f4 0x590 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDSP__USBPHY2_BVALID			0x1f4 0x590 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDOE__EPCD_GDOE				0x1f8 0x594 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDOE__GPIO3_18				0x1f8 0x594 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDOE__EIM_WEIM_D_18			0x1f8 0x594 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDOE__ELCDIF_DAT_18			0x1f8 0x594 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDOE__AUDMUX_AUD6_RXC			0x1f8 0x594 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDOE__SDMA_DEBUG_CORE_STATE_2		0x1f8 0x594 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDOE__USBPHY2_ENDSESSION			0x1f8 0x594 0x000 0x7 0x0
-#define MX50_PAD_EPDC_GDRL__EPCD_GDRL				0x1fc 0x598 0x000 0x0 0x0
-#define MX50_PAD_EPDC_GDRL__GPIO3_19				0x1fc 0x598 0x000 0x1 0x0
-#define MX50_PAD_EPDC_GDRL__EIM_WEIM_D_19			0x1f8 0x598 0x000 0x2 0x0
-#define MX50_PAD_EPDC_GDRL__ELCDIF_DAT_19			0x1fc 0x598 0x000 0x3 0x0
-#define MX50_PAD_EPDC_GDRL__AUDMUX_AUD6_RXFS			0x1fc 0x598 0x000 0x4 0x0
-#define MX50_PAD_EPDC_GDRL__SDMA_DEBUG_CORE_STATE_3		0x1fc 0x598 0x000 0x6 0x0
-#define MX50_PAD_EPDC_GDRL__USBPHY2_IDDIG			0x1fc 0x598 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDCLK__EPCD_SDCLK				0x200 0x59c 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCLK__GPIO3_20				0x200 0x59c 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCLK__EIM_WEIM_D_20			0x200 0x59c 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDCLK__ELCDIF_DAT_20			0x200 0x59c 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDCLK__AUDMUX_AUD5_TXD			0x200 0x59c 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDCLK__SDMA_DEBUG_BUS_DEVICE_0		0x200 0x59c 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDCLK__USBPHY2_HOSTDISCONNECT		0x200 0x59c 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDOEZ__EPCD_SDOEZ				0x204 0x5a0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDOEZ__GPIO3_21				0x204 0x5a0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDOEZ__EIM_WEIM_D_21			0x204 0x5a0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDOEZ__ELCDIF_DAT_21			0x204 0x5a0 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDOEZ__AUDMUX_AUD5_TXC			0x204 0x5a0 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDOEZ__SDMA_DEBUG_BUS_DEVICE_1		0x204 0x5a0 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDOEZ__USBPHY2_TXREADY			0x204 0x5a0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDOED__EPCD_SDOED				0x208 0x5a4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDOED__GPIO3_22				0x208 0x5a4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDOED__EIM_WEIM_D_22			0x208 0x5a4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDOED__ELCDIF_DAT_22			0x208 0x5a4 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDOED__AUDMUX_AUD5_TXFS			0x208 0x5a4 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDOED__SDMA_DEBUG_BUS_DEVICE_2		0x208 0x5a4 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDOED__USBPHY2_RXVALID			0x208 0x5a4 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDOE__EPCD_SDOE				0x20c 0x5a8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDOE__GPIO3_23				0x20c 0x5a8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDOE__EIM_WEIM_D_23			0x20c 0x5a8 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDOE__ELCDIF_DAT_23			0x20c 0x5a8 0x000 0x3 0x0
-#define MX50_PAD_EPDC_SDOE__AUDMUX_AUD5_RXD			0x20c 0x5a8 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDOE__SDMA_DEBUG_BUS_DEVICE_3		0x20c 0x5a8 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDOE__USBPHY2_RXACTIVE			0x20c 0x5a8 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDLE__EPCD_SDLE				0x210 0x5ac 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDLE__GPIO3_24				0x210 0x5ac 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDLE__EIM_WEIM_D_24			0x210 0x5ac 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDLE__ELCDIF_DAT_8			0x210 0x5ac 0x71c 0x3 0x1
-#define MX50_PAD_EPDC_SDLE__AUDMUX_AUD5_RXC			0x210 0x5ac 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDLE__SDMA_DEBUG_BUS_DEVICE_4		0x210 0x5ac 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDLE__USBPHY2_RXERROR			0x210 0x5ac 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDCLKN__EPCD_SDCLKN			0x214 0x5b0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCLKN__GPIO3_25				0x214 0x5b0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCLKN__EIM_WEIM_D_25			0x214 0x5b0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDCLKN__ELCDIF_DAT_9			0x214 0x5b0 0x720 0x3 0x1
-#define MX50_PAD_EPDC_SDCLKN__AUDMUX_AUD5_RXFS			0x214 0x5b0 0x000 0x4 0x0
-#define MX50_PAD_EPDC_SDCLKN__SDMA_DEBUG_BUS_ERROR		0x214 0x5b0 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDCLKN__USBPHY2_SIECLOCK			0x214 0x5b0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_SDSHR__EPCD_SDSHR				0x218 0x5b4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDSHR__GPIO3_26				0x218 0x5b4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDSHR__EIM_WEIM_D_26			0x218 0x5b4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_SDSHR__ELCDIF_DAT_10			0x218 0x5b4 0x724 0x3 0x1
-#define MX50_PAD_EPDC_SDSHR__AUDMUX_AUD4_TXD			0x218 0x5b4 0x6c8 0x4 0x1
-#define MX50_PAD_EPDC_SDSHR__SDMA_DEBUG_BUS_RWB			0x218 0x5b4 0x000 0x6 0x0
-#define MX50_PAD_EPDC_SDSHR__USBPHY2_LINESTATE_0		0x218 0x5b4 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCOM__EPCD_PWRCOM			0x21c 0x5b8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCOM__GPIO3_27				0x21c 0x5b8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCOM__EIM_WEIM_D_27			0x21c 0x5b8 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCOM__ELCDIF_DAT_11			0x21c 0x5b8 0x728 0x3 0x1
-#define MX50_PAD_EPDC_PWRCOM__AUDMUX_AUD4_TXC			0x21c 0x5b8 0x6d4 0x4 0x1
-#define MX50_PAD_EPDC_PWRCOM__SDMA_DEBUG_CORE_RUN		0x21c 0x5b8 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRCOM__USBPHY2_LINESTATE_1		0x21c 0x5b8 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRSTAT__EPCD_PWRSTAT			0x220 0x5bc 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRSTAT__GPIO3_28				0x220 0x5bc 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRSTAT__EIM_WEIM_D_28			0x220 0x5bc 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_DAT_12			0x220 0x5bc 0x72c 0x3 0x1
-#define MX50_PAD_EPDC_PWRSTAT__AUDMUX_AUD4_TXFS			0x220 0x5bc 0x6d8 0x4 0x1
-#define MX50_PAD_EPDC_PWRSTAT__SDMA_DEBUG_MODE			0x220 0x5bc 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRSTAT__USBPHY2_VBUSVALID		0x220 0x5bc 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__EPCD_PWRCTRL0			0x224 0x5c0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__GPIO3_29			0x224 0x5c0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__EIM_WEIM_D_29			0x224 0x5c0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_DAT_13			0x224 0x5c0 0x730 0x3 0x1
-#define MX50_PAD_EPDC_PWRCTRL0__AUDMUX_AUD4_RXD			0x224 0x5c0 0x6c4 0x4 0x1
-#define MX50_PAD_EPDC_PWRCTRL0__SDMA_DEBUG_RTBUFFER_WRITE	0x224 0x5c0 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRCTRL0__USBPHY2_AVALID			0x224 0x5c0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__EPCD_PWRCTRL1			0x228 0x5c4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__GPIO3_30			0x228 0x5c4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__EIM_WEIM_D_30			0x228 0x5c4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_DAT_14			0x228 0x5c4 0x734 0x3 0x1
-#define MX50_PAD_EPDC_PWRCTRL1__AUDMUX_AUD4_RXC			0x228 0x5c4 0x6cc 0x4 0x1
-#define MX50_PAD_EPDC_PWRCTRL1__SDMA_DEBUG_YIELD		0x228 0x5c4 0x000 0x6 0x0
-#define MX50_PAD_EPDC_PWRCTRL1__USBPHY1_ONBIST			0x228 0x5c4 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__EPCD_PWRCTRL2			0x22c 0x5c8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__GPIO3_31			0x22c 0x5c8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__EIM_WEIM_D_31			0x22c 0x5c8 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_DAT_15			0x22c 0x5c8 0x738 0x3 0x1
-#define MX50_PAD_EPDC_PWRCTRL2__AUDMUX_AUD4_RXFS		0x22c 0x5c8 0x6d0 0x4 0x1
-#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT_EVENT_0		0x22c 0x5c8 0x7b8 0x6 0x1
-#define MX50_PAD_EPDC_PWRCTRL2__USBPHY2_ONBIST			0x22c 0x5c8 0x000 0x7 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__EPCD_PWRCTRL3			0x230 0x5cc 0x000 0x0 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__GPIO4_20			0x230 0x5cc 0x000 0x1 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__EIM_WEIM_EB_2			0x230 0x5cc 0x000 0x2 0x0
-#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT_EVENT_1		0x230 0x5cc 0x7bc 0x6 0x1
-#define MX50_PAD_EPDC_PWRCTRL3__USBPHY1_BISTOK			0x230 0x5cc 0x000 0x7 0x0
-#define MX50_PAD_EPDC_VCOM0__EPCD_VCOM_0			0x234 0x5d0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_VCOM0__GPIO4_21				0x234 0x5d0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_VCOM0__EIM_WEIM_EB_3			0x234 0x5d0 0x000 0x2 0x0
-#define MX50_PAD_EPDC_VCOM0__USBPHY2_BISTOK			0x234 0x5d0 0x000 0x7 0x0
-#define MX50_PAD_EPDC_VCOM1__EPCD_VCOM_1			0x238 0x5d4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_VCOM1__GPIO4_22				0x238 0x5d4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_VCOM1__EIM_WEIM_CS_3			0x238 0x5d4 0x000 0x2 0x0
-#define MX50_PAD_EPDC_BDR0__EPCD_BDR_0				0x23c 0x5d8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_BDR0__GPIO4_23				0x23c 0x5d8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_BDR0__ELCDIF_DAT_7			0x23c 0x5d8 0x718 0x3 0x1
-#define MX50_PAD_EPDC_BDR1__EPCD_BDR_1				0x240 0x5dc 0x000 0x0 0x0
-#define MX50_PAD_EPDC_BDR1__GPIO4_24				0x240 0x5dc 0x000 0x1 0x0
-#define MX50_PAD_EPDC_BDR1__ELCDIF_DAT_6			0x240 0x5dc 0x714 0x3 0x1
-#define MX50_PAD_EPDC_SDCE0__EPCD_SDCE_0			0x244 0x5e0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE0__GPIO4_25				0x244 0x5e0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE0__ELCDIF_DAT_5			0x244 0x5e0 0x710 0x3 0x1
-#define MX50_PAD_EPDC_SDCE1__EPCD_SDCE_1			0x248 0x5e4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE1__GPIO4_26				0x248 0x5e4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE1__ELCDIF_DAT_4			0x248 0x5e4 0x70c 0x3 0x0
-#define MX50_PAD_EPDC_SDCE2__EPCD_SDCE_2			0x24c 0x5e8 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE2__GPIO4_27				0x24c 0x5e8 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT_3			0x24c 0x5e8 0x708 0x3 0x1
-#define MX50_PAD_EPDC_SDCE3__EPCD_SDCE_3			0x250 0x5ec 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE3__GPIO4_28				0x250 0x5ec 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE3__ELCDIF_DAT_2			0x250 0x5ec 0x704 0x3 0x1
-#define MX50_PAD_EPDC_SDCE4__EPCD_SDCE_4			0x254 0x5f0 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE4__GPIO4_29				0x254 0x5f0 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE4__ELCDIF_DAT_1			0x254 0x5f0 0x700 0x3 0x1
-#define MX50_PAD_EPDC_SDCE5__EPCD_SDCE_5			0x258 0x5f4 0x000 0x0 0x0
-#define MX50_PAD_EPDC_SDCE5__GPIO4_30				0x258 0x5f4 0x000 0x1 0x0
-#define MX50_PAD_EPDC_SDCE5__ELCDIF_DAT_0			0x258 0x5f4 0x6fc 0x3 0x1
-#define MX50_PAD_EIM_DA0__EIM_WEIM_A_0				0x25c 0x5f8 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA0__GPIO1_0				0x25c 0x5f8 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA0__KPP_COL_4				0x25c 0x5f8 0x790 0x3 0x2
-#define MX50_PAD_EIM_DA0__TPIU_TRACE_0				0x25c 0x5f8 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA0__SRC_BT_CFG1_0				0x25c 0x5f8 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA1__EIM_WEIM_A_1				0x260 0x5fc 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA1__GPIO1_1				0x260 0x5fc 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA1__KPP_ROW_4				0x260 0x5fc 0x7a0 0x3 0x2
-#define MX50_PAD_EIM_DA1__TPIU_TRACE_1				0x260 0x5fc 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA1__SRC_BT_CFG1_1				0x260 0x5fc 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA2__EIM_WEIM_A_2				0x264 0x600 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA2__GPIO1_2				0x264 0x600 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA2__KPP_COL_5				0x264 0x600 0x794 0x3 0x2
-#define MX50_PAD_EIM_DA2__TPIU_TRACE_2				0x264 0x600 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA2__SRC_BT_CFG1_2				0x264 0x600 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA3__EIM_WEIM_A_3				0x268 0x604 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA3__GPIO1_3				0x268 0x604 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA3__KPP_ROW_5				0x268 0x604 0x7a4 0x3 0x2
-#define MX50_PAD_EIM_DA3__TPIU_TRACE_3				0x268 0x604 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA3__SRC_BT_CFG1_3				0x268 0x604 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA4__EIM_WEIM_A_4				0x26c 0x608 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA4__GPIO1_4				0x26c 0x608 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA4__KPP_COL_6				0x26c 0x608 0x798 0x3 0x2
-#define MX50_PAD_EIM_DA4__TPIU_TRACE_4				0x26c 0x608 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA4__SRC_BT_CFG1_4				0x26c 0x608 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA5__EIM_WEIM_A_5				0x270 0x60c 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA5__GPIO1_5				0x270 0x60c 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA5__KPP_ROW_6				0x270 0x60c 0x7a8 0x3 0x2
-#define MX50_PAD_EIM_DA5__TPIU_TRACE_5				0x270 0x60c 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA5__SRC_BT_CFG1_5				0x270 0x60c 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA6__EIM_WEIM_A_6				0x274 0x610 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA6__GPIO1_6				0x274 0x610 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA6__KPP_COL_7				0x274 0x610 0x79c 0x3 0x2
-#define MX50_PAD_EIM_DA6__TPIU_TRACE_6				0x274 0x610 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA6__SRC_BT_CFG1_6				0x274 0x610 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA7__EIM_WEIM_A_7				0x278 0x614 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA7__GPIO1_7				0x278 0x614 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA7__KPP_ROW_7				0x278 0x614 0x7ac 0x3 0x2
-#define MX50_PAD_EIM_DA7__TPIU_TRACE_7				0x278 0x614 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA7__SRC_BT_CFG1_7				0x278 0x614 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA8__EIM_WEIM_A_8				0x27c 0x618 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA8__GPIO1_8				0x27c 0x618 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA8__EIM_NANDF_CLE				0x27c 0x618 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA8__TPIU_TRACE_8				0x27c 0x618 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA8__SRC_BT_CFG2_0				0x27c 0x618 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA9__EIM_WEIM_A_9				0x280 0x61c 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA9__GPIO1_9				0x280 0x61c 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA9__EIM_NANDF_ALE				0x280 0x61c 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA9__TPIU_TRACE_9				0x280 0x61c 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA9__SRC_BT_CFG2_1				0x280 0x61c 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA10__EIM_WEIM_A_10			0x284 0x620 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA10__GPIO1_10				0x284 0x620 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA10__EIM_NANDF_CEN_0			0x284 0x620 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA10__TPIU_TRACE_10			0x284 0x620 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA10__SRC_BT_CFG2_2			0x284 0x620 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA11__EIM_WEIM_A_11			0x288 0x624 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA11__GPIO1_11				0x288 0x624 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA11__EIM_NANDF_CEN_1			0x288 0x624 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA11__TPIU_TRACE_11			0x288 0x624 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA11__SRC_BT_CFG2_3			0x288 0x624 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA12__EIM_WEIM_A_12			0x28c 0x628 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA12__GPIO1_12				0x28c 0x628 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA12__EIM_NANDF_CEN_2			0x28c 0x628 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA12__EPDC_SDCE_6				0x28c 0x628 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA12__TPIU_TRACE_12			0x28c 0x628 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA12__SRC_BT_CFG2_4			0x28c 0x628 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA13__EIM_WEIM_A_13			0x290 0x62c 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA13__GPIO1_13				0x290 0x62c 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA13__EIM_NANDF_CEN_3			0x290 0x62c 0x000 0x2 0x0
-#define MX50_PAD_EIM_DA13__EPDC_SDCE_7				0x290 0x62c 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA13__TPIU_TRACE_13			0x290 0x62c 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA13__SRC_BT_CFG2_5			0x290 0x62c 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA14__EIM_WEIM_A_14			0x294 0x630 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA14__GPIO1_14				0x294 0x630 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA14__EIM_NANDF_READY0			0x294 0x630 0x7b4 0x2 0x2
-#define MX50_PAD_EIM_DA14__EPDC_SDCE_8				0x294 0x630 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA14__TPIU_TRACE_14			0x294 0x630 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA14__SRC_BT_CFG2_6			0x294 0x630 0x000 0x7 0x0
-#define MX50_PAD_EIM_DA15__EIM_WEIM_A_15			0x298 0x634 0x000 0x0 0x0
-#define MX50_PAD_EIM_DA15__GPIO1_15				0x298 0x634 0x000 0x1 0x0
-#define MX50_PAD_EIM_DA15__EIM_NANDF_DQS			0x298 0x634 0x7b0 0x2 0x2
-#define MX50_PAD_EIM_DA15__EPDC_SDCE_9				0x298 0x634 0x000 0x3 0x0
-#define MX50_PAD_EIM_DA15__TPIU_TRACE_15			0x298 0x634 0x000 0x6 0x0
-#define MX50_PAD_EIM_DA15__SRC_BT_CFG2_7			0x298 0x634 0x000 0x7 0x0
-#define MX50_PAD_EIM_CS2__EIM_WEIM_CS_2				0x29c 0x638 0x000 0x0 0x0
-#define MX50_PAD_EIM_CS2__GPIO1_16				0x29c 0x638 0x000 0x1 0x0
-#define MX50_PAD_EIM_CS2__EIM_WEIM_A_27				0x29c 0x638 0x000 0x2 0x0
-#define MX50_PAD_EIM_CS2__TPIU_TRCLK				0x29c 0x638 0x000 0x6 0x0
-#define MX50_PAD_EIM_CS2__SRC_BT_CFG3_0				0x29c 0x638 0x000 0x7 0x0
-#define MX50_PAD_EIM_CS1__EIM_WEIM_CS_1				0x2a0 0x63c 0x000 0x0 0x0
-#define MX50_PAD_EIM_CS1__GPIO1_17				0x2a0 0x63c 0x000 0x1 0x0
-#define MX50_PAD_EIM_CS1__TPIU_TRCTL				0x2a0 0x63c 0x000 0x6 0x0
-#define MX50_PAD_EIM_CS1__SRC_BT_CFG3_1				0x2a0 0x63c 0x000 0x7 0x0
-#define MX50_PAD_EIM_CS0__EIM_WEIM_CS_0				0x2a4 0x640 0x000 0x0 0x0
-#define MX50_PAD_EIM_CS0__GPIO1_18				0x2a4 0x640 0x000 0x1 0x0
-#define MX50_PAD_EIM_CS0__SRC_BT_CFG3_2				0x2a4 0x640 0x000 0x7 0x0
-#define MX50_PAD_EIM_EB0__EIM_WEIM_EB_0				0x2a8 0x644 0x000 0x0 0x0
-#define MX50_PAD_EIM_EB0__GPIO1_19				0x2a8 0x644 0x000 0x1 0x0
-#define MX50_PAD_EIM_EB0__SRC_BT_CFG3_3				0x2a8 0x644 0x000 0x7 0x0
-#define MX50_PAD_EIM_EB1__EIM_WEIM_EB_1				0x2ac 0x648 0x000 0x0 0x0
-#define MX50_PAD_EIM_EB1__GPIO1_20				0x2ac 0x648 0x000 0x1 0x0
-#define MX50_PAD_EIM_EB1__SRC_BT_CFG3_4				0x2ac 0x648 0x000 0x7 0x0
-#define MX50_PAD_EIM_WAIT__EIM_WEIM_WAIT			0x2b0 0x64c 0x000 0x0 0x0
-#define MX50_PAD_EIM_WAIT__GPIO1_21				0x2b0 0x64c 0x000 0x1 0x0
-#define MX50_PAD_EIM_WAIT__EIM_WEIM_DTACK_B			0x2b0 0x64c 0x000 0x2 0x0
-#define MX50_PAD_EIM_WAIT__SRC_BT_CFG3_5			0x2b0 0x64c 0x000 0x7 0x0
-#define MX50_PAD_EIM_BCLK__EIM_WEIM_BCLK			0x2b4 0x650 0x000 0x0 0x0
-#define MX50_PAD_EIM_BCLK__GPIO1_22				0x2b4 0x650 0x000 0x1 0x0
-#define MX50_PAD_EIM_BCLK__SRC_BT_CFG3_6			0x2b4 0x650 0x000 0x7 0x0
-#define MX50_PAD_EIM_RDY__EIM_WEIM_RDY				0x2b8 0x654 0x000 0x0 0x0
-#define MX50_PAD_EIM_RDY__GPIO1_23				0x2b8 0x654 0x000 0x1 0x0
-#define MX50_PAD_EIM_RDY__SRC_BT_CFG3_7				0x2b8 0x654 0x000 0x7 0x0
-#define MX50_PAD_EIM_OE__EIM_WEIM_OE				0x2bc 0x658 0x000 0x0 0x0
-#define MX50_PAD_EIM_OE__GPIO1_24				0x2bc 0x658 0x000 0x1 0x0
-#define MX50_PAD_EIM_OE__INT_BOOT				0x2bc 0x658 0x000 0x7 0x0
-#define MX50_PAD_EIM_RW__EIM_WEIM_RW				0x2c0 0x65c 0x000 0x0 0x0
-#define MX50_PAD_EIM_RW__GPIO1_25				0x2c0 0x65c 0x000 0x1 0x0
-#define MX50_PAD_EIM_RW__SYSTEM_RST				0x2c0 0x65c 0x000 0x7 0x0
-#define MX50_PAD_EIM_LBA__EIM_WEIM_LBA				0x2c4 0x660 0x000 0x0 0x0
-#define MX50_PAD_EIM_LBA__GPIO1_26				0x2c4 0x660 0x000 0x1 0x0
-#define MX50_PAD_EIM_LBA__TESTER_ACK				0x2c4 0x660 0x000 0x7 0x0
-#define MX50_PAD_EIM_CRE__EIM_WEIM_CRE				0x2c8 0x664 0x000 0x0 0x0
-#define MX50_PAD_EIM_CRE__GPIO1_27				0x2c8 0x664 0x000 0x1 0x0
-
-#endif /* __DTS_IMX50_PINFUNC_H */
diff --git a/src/arm/imx50.dtsi b/src/arm/imx50.dtsi
deleted file mode 100644
index c0e0f60ab6b2..000000000000
--- a/src/arm/imx50.dtsi
+++ /dev/null
@@ -1,487 +0,0 @@
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
-#include "imx50-pinfunc.h"
-#include <dt-bindings/clock/imx5-clock.h>
-
-/ {
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-		};
-	};
-
-	tzic: tz-interrupt-controller@0fffc000 {
-		compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x0fffc000 0x4000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <22579200>;
-		};
-
-		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-
-		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&tzic>;
-		ranges;
-
-		aips@50000000 { /* AIPS1 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x50000000 0x10000000>;
-			ranges;
-
-			spba@50000000 {
-				compatible = "fsl,spba-bus", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x50000000 0x40000>;
-				ranges;
-
-				esdhc1: esdhc@50004000 {
-					compatible = "fsl,imx50-esdhc";
-					reg = <0x50004000 0x4000>;
-					interrupts = <1>;
-					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				esdhc2: esdhc@50008000 {
-					compatible = "fsl,imx50-esdhc";
-					reg = <0x50008000 0x4000>;
-					interrupts = <2>;
-					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				uart3: serial@5000c000 {
-					compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-					reg = <0x5000c000 0x4000>;
-					interrupts = <33>;
-					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ecspi1: ecspi@50010000 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
-					reg = <0x50010000 0x4000>;
-					interrupts = <36>;
-					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
-					clock-names = "ipg", "per";
-					status = "disabled";
-				};
-
-				ssi2: ssi@50014000 {
-					compatible = "fsl,imx50-ssi",
-							"fsl,imx51-ssi",
-							"fsl,imx21-ssi";
-					reg = <0x50014000 0x4000>;
-					interrupts = <30>;
-					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
-					dmas = <&sdma 24 1 0>,
-					       <&sdma 25 1 0>;
-					dma-names = "rx", "tx";
-					fsl,fifo-depth = <15>;
-					status = "disabled";
-				};
-
-				esdhc3: esdhc@50020000 {
-					compatible = "fsl,imx50-esdhc";
-					reg = <0x50020000 0x4000>;
-					interrupts = <3>;
-					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-
-				esdhc4: esdhc@50024000 {
-					compatible = "fsl,imx50-esdhc";
-					reg = <0x50024000 0x4000>;
-					interrupts = <4>;
-					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
-					clock-names = "ipg", "ahb", "per";
-					bus-width = <4>;
-					status = "disabled";
-				};
-			};
-
-			usbotg: usb@53f80000 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80000 0x0200>;
-				interrupts = <18>;
-				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
-				status = "disabled";
-			};
-
-			usbh1: usb@53f80200 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80200 0x0200>;
-				interrupts = <14>;
-				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
-				status = "disabled";
-			};
-
-			usbh2: usb@53f80400 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80400 0x0200>;
-				interrupts = <16>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				status = "disabled";
-			};
-
-			usbh3: usb@53f80600 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80600 0x0200>;
-				interrupts = <17>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				status = "disabled";
-			};
-
-			gpio1: gpio@53f84000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f84000 0x4000>;
-				interrupts = <50 51>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@53f88000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f88000 0x4000>;
-				interrupts = <52 53>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@53f8c000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f8c000 0x4000>;
-				interrupts = <54 55>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@53f90000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53f90000 0x4000>;
-				interrupts = <56 57>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			wdog1: wdog@53f98000 {
-				compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
-				reg = <0x53f98000 0x4000>;
-				interrupts = <58>;
-				clocks = <&clks IMX5_CLK_DUMMY>;
-			};
-
-			gpt: timer@53fa0000 {
-				compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
-				reg = <0x53fa0000 0x4000>;
-				interrupts = <39>;
-				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
-				clock-names = "ipg", "per";
-			};
-
-			iomuxc: iomuxc@53fa8000 {
-				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
-				reg = <0x53fa8000 0x4000>;
-			};
-
-			gpr: iomuxc-gpr@53fa8000 {
-				compatible = "fsl,imx50-iomuxc-gpr", "syscon";
-				reg = <0x53fa8000 0xc>;
-			};
-
-			pwm1: pwm@53fb4000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
-				reg = <0x53fb4000 0x4000>;
-				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
-				clock-names = "ipg", "per";
-				interrupts = <61>;
-			};
-
-			pwm2: pwm@53fb8000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
-				reg = <0x53fb8000 0x4000>;
-				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
-				clock-names = "ipg", "per";
-				interrupts = <94>;
-			};
-
-			uart1: serial@53fbc000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x53fbc000 0x4000>;
-				interrupts = <31>;
-				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@53fc0000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x53fc0000 0x4000>;
-				interrupts = <32>;
-				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			src: src@53fd0000 {
-				compatible = "fsl,imx50-src", "fsl,imx51-src";
-				reg = <0x53fd0000 0x4000>;
-				#reset-cells = <1>;
-			};
-
-			clks: ccm@53fd4000{
-				compatible = "fsl,imx50-ccm";
-				reg = <0x53fd4000 0x4000>;
-				interrupts = <0 71 0x04 0 72 0x04>;
-				#clock-cells = <1>;
-			};
-
-			gpio5: gpio@53fdc000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53fdc000 0x4000>;
-				interrupts = <103 104>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@53fe0000 {
-				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
-				reg = <0x53fe0000 0x4000>;
-				interrupts = <105 106>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			i2c3: i2c@53fec000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
-				reg = <0x53fec000 0x4000>;
-				interrupts = <64>;
-				clocks = <&clks IMX5_CLK_I2C3_GATE>;
-				status = "disabled";
-			};
-
-			uart4: serial@53ff0000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x53ff0000 0x4000>;
-				interrupts = <13>;
-				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
-				         <&clks IMX5_CLK_UART4_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-		};
-
-		aips@60000000 {	/* AIPS2 */
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x60000000 0x10000000>;
-			ranges;
-
-			uart5: serial@63f90000 {
-				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
-				reg = <0x63f90000 0x4000>;
-				interrupts = <86>;
-				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
-				         <&clks IMX5_CLK_UART5_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			owire: owire@63fa4000 {
-				compatible = "fsl,imx50-owire", "fsl,imx21-owire";
-				reg = <0x63fa4000 0x4000>;
-				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
-				status = "disabled";
-			};
-
-			ecspi2: ecspi@63fac000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
-				reg = <0x63fac000 0x4000>;
-				interrupts = <37>;
-				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			sdma: sdma@63fb0000 {
-				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
-				reg = <0x63fb0000 0x4000>;
-				interrupts = <6>;
-				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
-				clock-names = "ipg", "ahb";
-				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
-			};
-
-			cspi: cspi@63fc0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
-				reg = <0x63fc0000 0x4000>;
-				interrupts = <38>;
-				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@63fc4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
-				reg = <0x63fc4000 0x4000>;
-				interrupts = <63>;
-				clocks = <&clks IMX5_CLK_I2C2_GATE>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@63fc8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
-				reg = <0x63fc8000 0x4000>;
-				interrupts = <62>;
-				clocks = <&clks IMX5_CLK_I2C1_GATE>;
-				status = "disabled";
-			};
-
-			ssi1: ssi@63fcc000 {
-				compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
-							"fsl,imx21-ssi";
-				reg = <0x63fcc000 0x4000>;
-				interrupts = <29>;
-				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
-				dmas = <&sdma 28 0 0>,
-				       <&sdma 29 0 0>;
-				dma-names = "rx", "tx";
-				fsl,fifo-depth = <15>;
-				status = "disabled";
-			};
-
-			audmux: audmux@63fd0000 {
-				compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
-				reg = <0x63fd0000 0x4000>;
-				status = "disabled";
-			};
-
-			fec: ethernet@63fec000 {
-				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
-				reg = <0x63fec000 0x4000>;
-				interrupts = <87>;
-				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
-				clock-names = "ipg", "ahb", "ptp";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/imx51-pinfunc.h b/src/arm/imx51-pinfunc.h
deleted file mode 100644
index 9eb92abaeb6d..000000000000
--- a/src/arm/imx51-pinfunc.h
+++ /dev/null
@@ -1,773 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX51_PINFUNC_H
-#define __DTS_IMX51_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX51_PAD_EIM_D16__AUD4_RXFS			0x05c 0x3f0 0x000 0x5 0x0
-#define MX51_PAD_EIM_D16__AUD5_TXD			0x05c 0x3f0 0x8d8 0x7 0x0
-#define MX51_PAD_EIM_D16__EIM_D16			0x05c 0x3f0 0x000 0x0 0x0
-#define MX51_PAD_EIM_D16__GPIO2_0			0x05c 0x3f0 0x000 0x1 0x0
-#define MX51_PAD_EIM_D16__I2C1_SDA			0x05c 0x3f0 0x9b4 0x4 0x0
-#define MX51_PAD_EIM_D16__UART2_CTS			0x05c 0x3f0 0x000 0x3 0x0
-#define MX51_PAD_EIM_D16__USBH2_DATA0			0x05c 0x3f0 0x000 0x2 0x0
-#define MX51_PAD_EIM_D17__AUD5_RXD			0x060 0x3f4 0x8d4 0x7 0x0
-#define MX51_PAD_EIM_D17__EIM_D17			0x060 0x3f4 0x000 0x0 0x0
-#define MX51_PAD_EIM_D17__GPIO2_1			0x060 0x3f4 0x000 0x1 0x0
-#define MX51_PAD_EIM_D17__UART2_RXD			0x060 0x3f4 0x9ec 0x3 0x0
-#define MX51_PAD_EIM_D17__UART3_CTS			0x060 0x3f4 0x000 0x4 0x0
-#define MX51_PAD_EIM_D17__USBH2_DATA1			0x060 0x3f4 0x000 0x2 0x0
-#define MX51_PAD_EIM_D18__AUD5_TXC			0x064 0x3f8 0x8e4 0x7 0x0
-#define MX51_PAD_EIM_D18__EIM_D18			0x064 0x3f8 0x000 0x0 0x0
-#define MX51_PAD_EIM_D18__GPIO2_2			0x064 0x3f8 0x000 0x1 0x0
-#define MX51_PAD_EIM_D18__UART2_TXD			0x064 0x3f8 0x000 0x3 0x0
-#define MX51_PAD_EIM_D18__UART3_RTS			0x064 0x3f8 0x9f0 0x4 0x1
-#define MX51_PAD_EIM_D18__USBH2_DATA2			0x064 0x3f8 0x000 0x2 0x0
-#define MX51_PAD_EIM_D19__AUD4_RXC			0x068 0x3fc 0x000 0x5 0x0
-#define MX51_PAD_EIM_D19__AUD5_TXFS			0x068 0x3fc 0x8e8 0x7 0x0
-#define MX51_PAD_EIM_D19__EIM_D19			0x068 0x3fc 0x000 0x0 0x0
-#define MX51_PAD_EIM_D19__GPIO2_3			0x068 0x3fc 0x000 0x1 0x0
-#define MX51_PAD_EIM_D19__I2C1_SCL			0x068 0x3fc 0x9b0 0x4 0x0
-#define MX51_PAD_EIM_D19__UART2_RTS			0x068 0x3fc 0x9e8 0x3 0x1
-#define MX51_PAD_EIM_D19__USBH2_DATA3			0x068 0x3fc 0x000 0x2 0x0
-#define MX51_PAD_EIM_D20__AUD4_TXD			0x06c 0x400 0x8c8 0x5 0x0
-#define MX51_PAD_EIM_D20__EIM_D20			0x06c 0x400 0x000 0x0 0x0
-#define MX51_PAD_EIM_D20__GPIO2_4			0x06c 0x400 0x000 0x1 0x0
-#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB		0x06c 0x400 0x000 0x4 0x0
-#define MX51_PAD_EIM_D20__USBH2_DATA4			0x06c 0x400 0x000 0x2 0x0
-#define MX51_PAD_EIM_D21__AUD4_RXD			0x070 0x404 0x8c4 0x5 0x0
-#define MX51_PAD_EIM_D21__EIM_D21			0x070 0x404 0x000 0x0 0x0
-#define MX51_PAD_EIM_D21__GPIO2_5			0x070 0x404 0x000 0x1 0x0
-#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB		0x070 0x404 0x000 0x3 0x0
-#define MX51_PAD_EIM_D21__USBH2_DATA5			0x070 0x404 0x000 0x2 0x0
-#define MX51_PAD_EIM_D22__AUD4_TXC			0x074 0x408 0x8cc 0x5 0x0
-#define MX51_PAD_EIM_D22__EIM_D22			0x074 0x408 0x000 0x0 0x0
-#define MX51_PAD_EIM_D22__GPIO2_6			0x074 0x408 0x000 0x1 0x0
-#define MX51_PAD_EIM_D22__USBH2_DATA6			0x074 0x408 0x000 0x2 0x0
-#define MX51_PAD_EIM_D23__AUD4_TXFS			0x078 0x40c 0x8d0 0x5 0x0
-#define MX51_PAD_EIM_D23__EIM_D23			0x078 0x40c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D23__GPIO2_7			0x078 0x40c 0x000 0x1 0x0
-#define MX51_PAD_EIM_D23__SPDIF_OUT1			0x078 0x40c 0x000 0x4 0x0
-#define MX51_PAD_EIM_D23__USBH2_DATA7			0x078 0x40c 0x000 0x2 0x0
-#define MX51_PAD_EIM_D24__AUD6_RXFS			0x07c 0x410 0x8f8 0x5 0x0
-#define MX51_PAD_EIM_D24__EIM_D24			0x07c 0x410 0x000 0x0 0x0
-#define MX51_PAD_EIM_D24__GPIO2_8			0x07c 0x410 0x000 0x1 0x0
-#define MX51_PAD_EIM_D24__I2C2_SDA			0x07c 0x410 0x9bc 0x4 0x0
-#define MX51_PAD_EIM_D24__UART3_CTS			0x07c 0x410 0x000 0x3 0x0
-#define MX51_PAD_EIM_D24__USBOTG_DATA0			0x07c 0x410 0x000 0x2 0x0
-#define MX51_PAD_EIM_D25__EIM_D25			0x080 0x414 0x000 0x0 0x0
-#define MX51_PAD_EIM_D25__KEY_COL6			0x080 0x414 0x9c8 0x1 0x0
-#define MX51_PAD_EIM_D25__UART2_CTS			0x080 0x414 0x000 0x4 0x0
-#define MX51_PAD_EIM_D25__UART3_RXD			0x080 0x414 0x9f4 0x3 0x0
-#define MX51_PAD_EIM_D25__USBOTG_DATA1			0x080 0x414 0x000 0x2 0x0
-#define MX51_PAD_EIM_D26__EIM_D26			0x084 0x418 0x000 0x0 0x0
-#define MX51_PAD_EIM_D26__KEY_COL7			0x084 0x418 0x9cc 0x1 0x0
-#define MX51_PAD_EIM_D26__UART2_RTS			0x084 0x418 0x9e8 0x4 0x3
-#define MX51_PAD_EIM_D26__UART3_TXD			0x084 0x418 0x000 0x3 0x0
-#define MX51_PAD_EIM_D26__USBOTG_DATA2			0x084 0x418 0x000 0x2 0x0
-#define MX51_PAD_EIM_D27__AUD6_RXC			0x088 0x41c 0x8f4 0x5 0x0
-#define MX51_PAD_EIM_D27__EIM_D27			0x088 0x41c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D27__GPIO2_9			0x088 0x41c 0x000 0x1 0x0
-#define MX51_PAD_EIM_D27__I2C2_SCL			0x088 0x41c 0x9b8 0x4 0x0
-#define MX51_PAD_EIM_D27__UART3_RTS			0x088 0x41c 0x9f0 0x3 0x3
-#define MX51_PAD_EIM_D27__USBOTG_DATA3			0x088 0x41c 0x000 0x2 0x0
-#define MX51_PAD_EIM_D28__AUD6_TXD			0x08c 0x420 0x8f0 0x5 0x0
-#define MX51_PAD_EIM_D28__EIM_D28			0x08c 0x420 0x000 0x0 0x0
-#define MX51_PAD_EIM_D28__KEY_ROW4			0x08c 0x420 0x9d0 0x1 0x0
-#define MX51_PAD_EIM_D28__USBOTG_DATA4			0x08c 0x420 0x000 0x2 0x0
-#define MX51_PAD_EIM_D29__AUD6_RXD			0x090 0x424 0x8ec 0x5 0x0
-#define MX51_PAD_EIM_D29__EIM_D29			0x090 0x424 0x000 0x0 0x0
-#define MX51_PAD_EIM_D29__KEY_ROW5			0x090 0x424 0x9d4 0x1 0x0
-#define MX51_PAD_EIM_D29__USBOTG_DATA5			0x090 0x424 0x000 0x2 0x0
-#define MX51_PAD_EIM_D30__AUD6_TXC			0x094 0x428 0x8fc 0x5 0x0
-#define MX51_PAD_EIM_D30__EIM_D30			0x094 0x428 0x000 0x0 0x0
-#define MX51_PAD_EIM_D30__KEY_ROW6			0x094 0x428 0x9d8 0x1 0x0
-#define MX51_PAD_EIM_D30__USBOTG_DATA6			0x094 0x428 0x000 0x2 0x0
-#define MX51_PAD_EIM_D31__AUD6_TXFS			0x098 0x42c 0x900 0x5 0x0
-#define MX51_PAD_EIM_D31__EIM_D31			0x098 0x42c 0x000 0x0 0x0
-#define MX51_PAD_EIM_D31__KEY_ROW7			0x098 0x42c 0x9dc 0x1 0x0
-#define MX51_PAD_EIM_D31__USBOTG_DATA7			0x098 0x42c 0x000 0x2 0x0
-#define MX51_PAD_EIM_A16__EIM_A16			0x09c 0x430 0x000 0x0 0x0
-#define MX51_PAD_EIM_A16__GPIO2_10			0x09c 0x430 0x000 0x1 0x0
-#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0			0x09c 0x430 0x000 0x7 0x0
-#define MX51_PAD_EIM_A17__EIM_A17			0x0a0 0x434 0x000 0x0 0x0
-#define MX51_PAD_EIM_A17__GPIO2_11			0x0a0 0x434 0x000 0x1 0x0
-#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1			0x0a0 0x434 0x000 0x7 0x0
-#define MX51_PAD_EIM_A18__BOOT_LPB0			0x0a4 0x438 0x000 0x7 0x0
-#define MX51_PAD_EIM_A18__EIM_A18			0x0a4 0x438 0x000 0x0 0x0
-#define MX51_PAD_EIM_A18__GPIO2_12			0x0a4 0x438 0x000 0x1 0x0
-#define MX51_PAD_EIM_A19__BOOT_LPB1			0x0a8 0x43c 0x000 0x7 0x0
-#define MX51_PAD_EIM_A19__EIM_A19			0x0a8 0x43c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A19__GPIO2_13			0x0a8 0x43c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A20__BOOT_UART_SRC0		0x0ac 0x440 0x000 0x7 0x0
-#define MX51_PAD_EIM_A20__EIM_A20			0x0ac 0x440 0x000 0x0 0x0
-#define MX51_PAD_EIM_A20__GPIO2_14			0x0ac 0x440 0x000 0x1 0x0
-#define MX51_PAD_EIM_A21__BOOT_UART_SRC1		0x0b0 0x444 0x000 0x7 0x0
-#define MX51_PAD_EIM_A21__EIM_A21			0x0b0 0x444 0x000 0x0 0x0
-#define MX51_PAD_EIM_A21__GPIO2_15			0x0b0 0x444 0x000 0x1 0x0
-#define MX51_PAD_EIM_A22__EIM_A22			0x0b4 0x448 0x000 0x0 0x0
-#define MX51_PAD_EIM_A22__GPIO2_16			0x0b4 0x448 0x000 0x1 0x0
-#define MX51_PAD_EIM_A23__BOOT_HPN_EN			0x0b8 0x44c 0x000 0x7 0x0
-#define MX51_PAD_EIM_A23__EIM_A23			0x0b8 0x44c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A23__GPIO2_17			0x0b8 0x44c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A24__EIM_A24			0x0bc 0x450 0x000 0x0 0x0
-#define MX51_PAD_EIM_A24__GPIO2_18			0x0bc 0x450 0x000 0x1 0x0
-#define MX51_PAD_EIM_A24__USBH2_CLK			0x0bc 0x450 0x000 0x2 0x0
-#define MX51_PAD_EIM_A25__DISP1_PIN4			0x0c0 0x454 0x000 0x6 0x0
-#define MX51_PAD_EIM_A25__EIM_A25			0x0c0 0x454 0x000 0x0 0x0
-#define MX51_PAD_EIM_A25__GPIO2_19			0x0c0 0x454 0x000 0x1 0x0
-#define MX51_PAD_EIM_A25__USBH2_DIR			0x0c0 0x454 0x000 0x2 0x0
-#define MX51_PAD_EIM_A26__CSI1_DATA_EN			0x0c4 0x458 0x9a0 0x5 0x0
-#define MX51_PAD_EIM_A26__DISP2_EXT_CLK			0x0c4 0x458 0x908 0x6 0x0
-#define MX51_PAD_EIM_A26__EIM_A26			0x0c4 0x458 0x000 0x0 0x0
-#define MX51_PAD_EIM_A26__GPIO2_20			0x0c4 0x458 0x000 0x1 0x0
-#define MX51_PAD_EIM_A26__USBH2_STP			0x0c4 0x458 0x000 0x2 0x0
-#define MX51_PAD_EIM_A27__CSI2_DATA_EN			0x0c8 0x45c 0x99c 0x5 0x0
-#define MX51_PAD_EIM_A27__DISP1_PIN1			0x0c8 0x45c 0x9a4 0x6 0x0
-#define MX51_PAD_EIM_A27__EIM_A27			0x0c8 0x45c 0x000 0x0 0x0
-#define MX51_PAD_EIM_A27__GPIO2_21			0x0c8 0x45c 0x000 0x1 0x0
-#define MX51_PAD_EIM_A27__USBH2_NXT			0x0c8 0x45c 0x000 0x2 0x0
-#define MX51_PAD_EIM_EB0__EIM_EB0			0x0cc 0x460 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB1__EIM_EB1			0x0d0 0x464 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB2__AUD5_RXFS			0x0d4 0x468 0x8e0 0x6 0x0
-#define MX51_PAD_EIM_EB2__CSI1_D2			0x0d4 0x468 0x000 0x5 0x0
-#define MX51_PAD_EIM_EB2__EIM_EB2			0x0d4 0x468 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB2__FEC_MDIO			0x0d4 0x468 0x954 0x3 0x0
-#define MX51_PAD_EIM_EB2__GPIO2_22			0x0d4 0x468 0x000 0x1 0x0
-#define MX51_PAD_EIM_EB2__GPT_CMPOUT1			0x0d4 0x468 0x000 0x7 0x0
-#define MX51_PAD_EIM_EB3__AUD5_RXC			0x0d8 0x46c 0x8dc 0x6 0x0
-#define MX51_PAD_EIM_EB3__CSI1_D3			0x0d8 0x46c 0x000 0x5 0x0
-#define MX51_PAD_EIM_EB3__EIM_EB3			0x0d8 0x46c 0x000 0x0 0x0
-#define MX51_PAD_EIM_EB3__FEC_RDATA1			0x0d8 0x46c 0x95c 0x3 0x0
-#define MX51_PAD_EIM_EB3__GPIO2_23			0x0d8 0x46c 0x000 0x1 0x0
-#define MX51_PAD_EIM_EB3__GPT_CMPOUT2			0x0d8 0x46c 0x000 0x7 0x0
-#define MX51_PAD_EIM_OE__EIM_OE				0x0dc 0x470 0x000 0x0 0x0
-#define MX51_PAD_EIM_OE__GPIO2_24			0x0dc 0x470 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS0__EIM_CS0			0x0e0 0x474 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS0__GPIO2_25			0x0e0 0x474 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS1__EIM_CS1			0x0e4 0x478 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS1__GPIO2_26			0x0e4 0x478 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS2__AUD5_TXD			0x0e8 0x47c 0x8d8 0x6 0x1
-#define MX51_PAD_EIM_CS2__CSI1_D4			0x0e8 0x47c 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS2__EIM_CS2			0x0e8 0x47c 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS2__FEC_RDATA2			0x0e8 0x47c 0x960 0x3 0x0
-#define MX51_PAD_EIM_CS2__GPIO2_27			0x0e8 0x47c 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS2__USBOTG_STP			0x0e8 0x47c 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS3__AUD5_RXD			0x0ec 0x480 0x8d4 0x6 0x1
-#define MX51_PAD_EIM_CS3__CSI1_D5			0x0ec 0x480 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS3__EIM_CS3			0x0ec 0x480 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS3__FEC_RDATA3			0x0ec 0x480 0x964 0x3 0x0
-#define MX51_PAD_EIM_CS3__GPIO2_28			0x0ec 0x480 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS3__USBOTG_NXT			0x0ec 0x480 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS4__AUD5_TXC			0x0f0 0x484 0x8e4 0x6 0x1
-#define MX51_PAD_EIM_CS4__CSI1_D6			0x0f0 0x484 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS4__EIM_CS4			0x0f0 0x484 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS4__FEC_RX_ER			0x0f0 0x484 0x970 0x3 0x0
-#define MX51_PAD_EIM_CS4__GPIO2_29			0x0f0 0x484 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS4__USBOTG_CLK			0x0f0 0x484 0x000 0x2 0x0
-#define MX51_PAD_EIM_CS5__AUD5_TXFS			0x0f4 0x488 0x8e8 0x6 0x1
-#define MX51_PAD_EIM_CS5__CSI1_D7			0x0f4 0x488 0x000 0x5 0x0
-#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK			0x0f4 0x488 0x904 0x4 0x0
-#define MX51_PAD_EIM_CS5__EIM_CS5			0x0f4 0x488 0x000 0x0 0x0
-#define MX51_PAD_EIM_CS5__FEC_CRS			0x0f4 0x488 0x950 0x3 0x0
-#define MX51_PAD_EIM_CS5__GPIO2_30			0x0f4 0x488 0x000 0x1 0x0
-#define MX51_PAD_EIM_CS5__USBOTG_DIR			0x0f4 0x488 0x000 0x2 0x0
-#define MX51_PAD_EIM_DTACK__EIM_DTACK			0x0f8 0x48c 0x000 0x0 0x0
-#define MX51_PAD_EIM_DTACK__GPIO2_31			0x0f8 0x48c 0x000 0x1 0x0
-#define MX51_PAD_EIM_LBA__EIM_LBA			0x0fc 0x494 0x000 0x0 0x0
-#define MX51_PAD_EIM_LBA__GPIO3_1			0x0fc 0x494 0x978 0x1 0x0
-#define MX51_PAD_EIM_CRE__EIM_CRE			0x100 0x4a0 0x000 0x0 0x0
-#define MX51_PAD_EIM_CRE__GPIO3_2			0x100 0x4a0 0x97c 0x1 0x0
-#define MX51_PAD_DRAM_CS1__DRAM_CS1			0x104 0x4d0 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WE_B__GPIO3_3			0x108 0x4e4 0x980 0x3 0x0
-#define MX51_PAD_NANDF_WE_B__NANDF_WE_B			0x108 0x4e4 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WE_B__PATA_DIOW			0x108 0x4e4 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0			0x108 0x4e4 0x93c 0x2 0x0
-#define MX51_PAD_NANDF_RE_B__GPIO3_4			0x10c 0x4e8 0x984 0x3 0x0
-#define MX51_PAD_NANDF_RE_B__NANDF_RE_B			0x10c 0x4e8 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RE_B__PATA_DIOR			0x10c 0x4e8 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1			0x10c 0x4e8 0x940 0x2 0x0
-#define MX51_PAD_NANDF_ALE__GPIO3_5			0x110 0x4ec 0x988 0x3 0x0
-#define MX51_PAD_NANDF_ALE__NANDF_ALE			0x110 0x4ec 0x000 0x0 0x0
-#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN		0x110 0x4ec 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CLE__GPIO3_6			0x114 0x4f0 0x98c 0x3 0x0
-#define MX51_PAD_NANDF_CLE__NANDF_CLE			0x114 0x4f0 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CLE__PATA_RESET_B		0x114 0x4f0 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WP_B__GPIO3_7			0x118 0x4f4 0x990 0x3 0x0
-#define MX51_PAD_NANDF_WP_B__NANDF_WP_B			0x118 0x4f4 0x000 0x0 0x0
-#define MX51_PAD_NANDF_WP_B__PATA_DMACK			0x118 0x4f4 0x000 0x1 0x0
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2			0x118 0x4f4 0x944 0x2 0x0
-#define MX51_PAD_NANDF_RB0__ECSPI2_SS1			0x11c 0x4f8 0x930 0x5 0x0
-#define MX51_PAD_NANDF_RB0__GPIO3_8			0x11c 0x4f8 0x994 0x3 0x0
-#define MX51_PAD_NANDF_RB0__NANDF_RB0			0x11c 0x4f8 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB0__PATA_DMARQ			0x11c 0x4f8 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RB0__SD3_DATA3			0x11c 0x4f8 0x948 0x2 0x0
-#define MX51_PAD_NANDF_RB1__CSPI_MOSI			0x120 0x4fc 0x91c 0x6 0x0
-#define MX51_PAD_NANDF_RB1__ECSPI2_RDY			0x120 0x4fc 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB1__GPIO3_9			0x120 0x4fc 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB1__NANDF_RB1			0x120 0x4fc 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB1__PATA_IORDY			0x120 0x4fc 0x000 0x1 0x0
-#define MX51_PAD_NANDF_RB1__SD4_CMD			0x120 0x4fc 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RB2__DISP2_WAIT			0x124 0x500 0x9a8 0x5 0x0
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK			0x124 0x500 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB2__FEC_COL			0x124 0x500 0x94c 0x1 0x0
-#define MX51_PAD_NANDF_RB2__GPIO3_10			0x124 0x500 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB2__NANDF_RB2			0x124 0x500 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP			0x124 0x500 0x000 0x7 0x0
-#define MX51_PAD_NANDF_RB2__USBH3_NXT			0x124 0x500 0xa20 0x6 0x0
-#define MX51_PAD_NANDF_RB3__DISP1_WAIT			0x128 0x504 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO			0x128 0x504 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RB3__FEC_RX_CLK			0x128 0x504 0x968 0x1 0x0
-#define MX51_PAD_NANDF_RB3__GPIO3_11			0x128 0x504 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RB3__NANDF_RB3			0x128 0x504 0x000 0x0 0x0
-#define MX51_PAD_NANDF_RB3__USBH3_CLK			0x128 0x504 0x9f8 0x6 0x0
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM			0x128 0x504 0x000 0x7 0x0
-#define MX51_PAD_GPIO_NAND__GPIO_NAND			0x12c 0x514 0x998 0x0 0x0
-#define MX51_PAD_GPIO_NAND__PATA_INTRQ			0x12c 0x514 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS0__GPIO3_16			0x130 0x518 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS0__NANDF_CS0			0x130 0x518 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS1__GPIO3_17			0x134 0x51c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS1__NANDF_CS1			0x134 0x51c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS2__CSPI_SCLK			0x138 0x520 0x914 0x6 0x0
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER			0x138 0x520 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS2__GPIO3_18			0x138 0x520 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS2__NANDF_CS2			0x138 0x520 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS2__PATA_CS_0			0x138 0x520 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS2__SD4_CLK			0x138 0x520 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP			0x138 0x520 0x000 0x7 0x0
-#define MX51_PAD_NANDF_CS3__FEC_MDC			0x13c 0x524 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS3__GPIO3_19			0x13c 0x524 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS3__NANDF_CS3			0x13c 0x524 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS3__PATA_CS_1			0x13c 0x524 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS3__SD4_DAT0			0x13c 0x524 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM			0x13c 0x524 0x000 0x7 0x0
-#define MX51_PAD_NANDF_CS4__FEC_TDATA1			0x140 0x528 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS4__GPIO3_20			0x140 0x528 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS4__NANDF_CS4			0x140 0x528 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS4__PATA_DA_0			0x140 0x528 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS4__SD4_DAT1			0x140 0x528 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS4__USBH3_STP			0x140 0x528 0xa24 0x7 0x0
-#define MX51_PAD_NANDF_CS5__FEC_TDATA2			0x144 0x52c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS5__GPIO3_21			0x144 0x52c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS5__NANDF_CS5			0x144 0x52c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS5__PATA_DA_1			0x144 0x52c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS5__SD4_DAT2			0x144 0x52c 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS5__USBH3_DIR			0x144 0x52c 0xa1c 0x7 0x0
-#define MX51_PAD_NANDF_CS6__CSPI_SS3			0x148 0x530 0x928 0x7 0x0
-#define MX51_PAD_NANDF_CS6__FEC_TDATA3			0x148 0x530 0x000 0x2 0x0
-#define MX51_PAD_NANDF_CS6__GPIO3_22			0x148 0x530 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS6__NANDF_CS6			0x148 0x530 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS6__PATA_DA_2			0x148 0x530 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS6__SD4_DAT3			0x148 0x530 0x000 0x5 0x0
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN			0x14c 0x534 0x000 0x1 0x0
-#define MX51_PAD_NANDF_CS7__GPIO3_23			0x14c 0x534 0x000 0x3 0x0
-#define MX51_PAD_NANDF_CS7__NANDF_CS7			0x14c 0x534 0x000 0x0 0x0
-#define MX51_PAD_NANDF_CS7__SD3_CLK			0x14c 0x534 0x000 0x5 0x0
-#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0		0x150 0x538 0x000 0x2 0x0
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK		0x150 0x538 0x974 0x1 0x0
-#define MX51_PAD_NANDF_RDY_INT__GPIO3_24		0x150 0x538 0x000 0x3 0x0
-#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT		0x150 0x538 0x938 0x0 0x0
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD			0x150 0x538 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI			0x154 0x53c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D15__GPIO3_25			0x154 0x53c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D15__NANDF_D15			0x154 0x53c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D15__PATA_DATA15			0x154 0x53c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D15__SD3_DAT7			0x154 0x53c 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D14__ECSPI2_SS3			0x158 0x540 0x934 0x2 0x0
-#define MX51_PAD_NANDF_D14__GPIO3_26			0x158 0x540 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D14__NANDF_D14			0x158 0x540 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D14__PATA_DATA14			0x158 0x540 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D14__SD3_DAT6			0x158 0x540 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D13__ECSPI2_SS2			0x15c 0x544 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D13__GPIO3_27			0x15c 0x544 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D13__NANDF_D13			0x15c 0x544 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D13__PATA_DATA13			0x15c 0x544 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D13__SD3_DAT5			0x15c 0x544 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D12__ECSPI2_SS1			0x160 0x548 0x930 0x2 0x1
-#define MX51_PAD_NANDF_D12__GPIO3_28			0x160 0x548 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D12__NANDF_D12			0x160 0x548 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D12__PATA_DATA12			0x160 0x548 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D12__SD3_DAT4			0x160 0x548 0x000 0x5 0x0
-#define MX51_PAD_NANDF_D11__FEC_RX_DV			0x164 0x54c 0x96c 0x2 0x0
-#define MX51_PAD_NANDF_D11__GPIO3_29			0x164 0x54c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D11__NANDF_D11			0x164 0x54c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D11__PATA_DATA11			0x164 0x54c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D11__SD3_DATA3			0x164 0x54c 0x948 0x5 0x1
-#define MX51_PAD_NANDF_D10__GPIO3_30			0x168 0x550 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D10__NANDF_D10			0x168 0x550 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D10__PATA_DATA10			0x168 0x550 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D10__SD3_DATA2			0x168 0x550 0x944 0x5 0x1
-#define MX51_PAD_NANDF_D9__FEC_RDATA0			0x16c 0x554 0x958 0x2 0x0
-#define MX51_PAD_NANDF_D9__GPIO3_31			0x16c 0x554 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D9__NANDF_D9			0x16c 0x554 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D9__PATA_DATA9			0x16c 0x554 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D9__SD3_DATA1			0x16c 0x554 0x940 0x5 0x1
-#define MX51_PAD_NANDF_D8__FEC_TDATA0			0x170 0x558 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D8__GPIO4_0			0x170 0x558 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D8__NANDF_D8			0x170 0x558 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D8__PATA_DATA8			0x170 0x558 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D8__SD3_DATA0			0x170 0x558 0x93c 0x5 0x1
-#define MX51_PAD_NANDF_D7__GPIO4_1			0x174 0x55c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D7__NANDF_D7			0x174 0x55c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D7__PATA_DATA7			0x174 0x55c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D7__USBH3_DATA0			0x174 0x55c 0x9fc 0x5 0x0
-#define MX51_PAD_NANDF_D6__GPIO4_2			0x178 0x560 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D6__NANDF_D6			0x178 0x560 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D6__PATA_DATA6			0x178 0x560 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D6__SD4_LCTL			0x178 0x560 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D6__USBH3_DATA1			0x178 0x560 0xa00 0x5 0x0
-#define MX51_PAD_NANDF_D5__GPIO4_3			0x17c 0x564 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D5__NANDF_D5			0x17c 0x564 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D5__PATA_DATA5			0x17c 0x564 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D5__SD4_WP			0x17c 0x564 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D5__USBH3_DATA2			0x17c 0x564 0xa04 0x5 0x0
-#define MX51_PAD_NANDF_D4__GPIO4_4			0x180 0x568 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D4__NANDF_D4			0x180 0x568 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D4__PATA_DATA4			0x180 0x568 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D4__SD4_CD			0x180 0x568 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D4__USBH3_DATA3			0x180 0x568 0xa08 0x5 0x0
-#define MX51_PAD_NANDF_D3__GPIO4_5			0x184 0x56c 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D3__NANDF_D3			0x184 0x56c 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D3__PATA_DATA3			0x184 0x56c 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D3__SD4_DAT4			0x184 0x56c 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D3__USBH3_DATA4			0x184 0x56c 0xa0c 0x5 0x0
-#define MX51_PAD_NANDF_D2__GPIO4_6			0x188 0x570 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D2__NANDF_D2			0x188 0x570 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D2__PATA_DATA2			0x188 0x570 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D2__SD4_DAT5			0x188 0x570 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D2__USBH3_DATA5			0x188 0x570 0xa10 0x5 0x0
-#define MX51_PAD_NANDF_D1__GPIO4_7			0x18c 0x574 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D1__NANDF_D1			0x18c 0x574 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D1__PATA_DATA1			0x18c 0x574 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D1__SD4_DAT6			0x18c 0x574 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D1__USBH3_DATA6			0x18c 0x574 0xa14 0x5 0x0
-#define MX51_PAD_NANDF_D0__GPIO4_8			0x190 0x578 0x000 0x3 0x0
-#define MX51_PAD_NANDF_D0__NANDF_D0			0x190 0x578 0x000 0x0 0x0
-#define MX51_PAD_NANDF_D0__PATA_DATA0			0x190 0x578 0x000 0x1 0x0
-#define MX51_PAD_NANDF_D0__SD4_DAT7			0x190 0x578 0x000 0x2 0x0
-#define MX51_PAD_NANDF_D0__USBH3_DATA7			0x190 0x578 0xa18 0x5 0x0
-#define MX51_PAD_CSI1_D8__CSI1_D8			0x194 0x57c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D8__GPIO3_12			0x194 0x57c 0x998 0x3 0x1
-#define MX51_PAD_CSI1_D9__CSI1_D9			0x198 0x580 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D9__GPIO3_13			0x198 0x580 0x000 0x3 0x0
-#define MX51_PAD_CSI1_D10__CSI1_D10			0x19c 0x584 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D11__CSI1_D11			0x1a0 0x588 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D12__CSI1_D12			0x1a4 0x58c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D13__CSI1_D13			0x1a8 0x590 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D14__CSI1_D14			0x1ac 0x594 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D15__CSI1_D15			0x1b0 0x598 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D16__CSI1_D16			0x1b4 0x59c 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D17__CSI1_D17			0x1b8 0x5a0 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D18__CSI1_D18			0x1bc 0x5a4 0x000 0x0 0x0
-#define MX51_PAD_CSI1_D19__CSI1_D19			0x1c0 0x5a8 0x000 0x0 0x0
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC			0x1c4 0x5ac 0x000 0x0 0x0
-#define MX51_PAD_CSI1_VSYNC__GPIO3_14			0x1c4 0x5ac 0x000 0x3 0x0
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC			0x1c8 0x5b0 0x000 0x0 0x0
-#define MX51_PAD_CSI1_HSYNC__GPIO3_15			0x1c8 0x5b0 0x000 0x3 0x0
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK		0x000 0x5b4 0x000 0x0 0x0
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK			0x000 0x5b8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D12__CSI2_D12			0x1cc 0x5bc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D12__GPIO4_9			0x1cc 0x5bc 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D13__CSI2_D13			0x1d0 0x5c0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D13__GPIO4_10			0x1d0 0x5c0 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D14__CSI2_D14			0x1d4 0x5c4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D15__CSI2_D15			0x1d8 0x5c8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D16__CSI2_D16			0x1dc 0x5cc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D17__CSI2_D17			0x1e0 0x5d0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D18__CSI2_D18			0x1e4 0x5d4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D18__GPIO4_11			0x1e4 0x5d4 0x000 0x3 0x0
-#define MX51_PAD_CSI2_D19__CSI2_D19			0x1e8 0x5d8 0x000 0x0 0x0
-#define MX51_PAD_CSI2_D19__GPIO4_12			0x1e8 0x5d8 0x000 0x3 0x0
-#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC			0x1ec 0x5dc 0x000 0x0 0x0
-#define MX51_PAD_CSI2_VSYNC__GPIO4_13			0x1ec 0x5dc 0x000 0x3 0x0
-#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC			0x1f0 0x5e0 0x000 0x0 0x0
-#define MX51_PAD_CSI2_HSYNC__GPIO4_14			0x1f0 0x5e0 0x000 0x3 0x0
-#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK		0x1f4 0x5e4 0x000 0x0 0x0
-#define MX51_PAD_CSI2_PIXCLK__GPIO4_15			0x1f4 0x5e4 0x000 0x3 0x0
-#define MX51_PAD_I2C1_CLK__GPIO4_16			0x1f8 0x5e8 0x000 0x3 0x0
-#define MX51_PAD_I2C1_CLK__I2C1_CLK			0x1f8 0x5e8 0x000 0x0 0x0
-#define MX51_PAD_I2C1_DAT__GPIO4_17			0x1fc 0x5ec 0x000 0x3 0x0
-#define MX51_PAD_I2C1_DAT__I2C1_DAT			0x1fc 0x5ec 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD			0x200 0x5f0 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_TXD__GPIO4_18			0x200 0x5f0 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD			0x204 0x5f4 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_RXD__GPIO4_19			0x204 0x5f4 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_RXD__UART3_RXD			0x204 0x5f4 0x9f4 0x1 0x2
-#define MX51_PAD_AUD3_BB_CK__AUD3_TXC			0x208 0x5f8 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_CK__GPIO4_20			0x208 0x5f8 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS			0x20c 0x5fc 0x000 0x0 0x0
-#define MX51_PAD_AUD3_BB_FS__GPIO4_21			0x20c 0x5fc 0x000 0x3 0x0
-#define MX51_PAD_AUD3_BB_FS__UART3_TXD			0x20c 0x5fc 0x000 0x1 0x0
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI		0x210 0x600 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_MOSI__GPIO4_22			0x210 0x600 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_MOSI__I2C1_SDA			0x210 0x600 0x9b4 0x1 0x1
-#define MX51_PAD_CSPI1_MISO__AUD4_RXD			0x214 0x604 0x8c4 0x1 0x1
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO		0x214 0x604 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_MISO__GPIO4_23			0x214 0x604 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SS0__AUD4_TXC			0x218 0x608 0x8cc 0x1 0x1
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0			0x218 0x608 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SS0__GPIO4_24			0x218 0x608 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SS1__AUD4_TXD			0x21c 0x60c 0x8c8 0x1 0x1
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1			0x21c 0x60c 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SS1__GPIO4_25			0x21c 0x60c 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_RDY__AUD4_TXFS			0x220 0x610 0x8d0 0x1 0x1
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY			0x220 0x610 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_RDY__GPIO4_26			0x220 0x610 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK		0x224 0x614 0x000 0x0 0x0
-#define MX51_PAD_CSPI1_SCLK__GPIO4_27			0x224 0x614 0x000 0x3 0x0
-#define MX51_PAD_CSPI1_SCLK__I2C1_SCL			0x224 0x614 0x9b0 0x1 0x1
-#define MX51_PAD_UART1_RXD__GPIO4_28			0x228 0x618 0x000 0x3 0x0
-#define MX51_PAD_UART1_RXD__UART1_RXD			0x228 0x618 0x9e4 0x0 0x0
-#define MX51_PAD_UART1_TXD__GPIO4_29			0x22c 0x61c 0x000 0x3 0x0
-#define MX51_PAD_UART1_TXD__PWM2_PWMO			0x22c 0x61c 0x000 0x1 0x0
-#define MX51_PAD_UART1_TXD__UART1_TXD			0x22c 0x61c 0x000 0x0 0x0
-#define MX51_PAD_UART1_RTS__GPIO4_30			0x230 0x620 0x000 0x3 0x0
-#define MX51_PAD_UART1_RTS__UART1_RTS			0x230 0x620 0x9e0 0x0 0x0
-#define MX51_PAD_UART1_CTS__GPIO4_31			0x234 0x624 0x000 0x3 0x0
-#define MX51_PAD_UART1_CTS__UART1_CTS			0x234 0x624 0x000 0x0 0x0
-#define MX51_PAD_UART2_RXD__FIRI_TXD			0x238 0x628 0x000 0x1 0x0
-#define MX51_PAD_UART2_RXD__GPIO1_20			0x238 0x628 0x000 0x3 0x0
-#define MX51_PAD_UART2_RXD__UART2_RXD			0x238 0x628 0x9ec 0x0 0x2
-#define MX51_PAD_UART2_TXD__FIRI_RXD			0x23c 0x62c 0x000 0x1 0x0
-#define MX51_PAD_UART2_TXD__GPIO1_21			0x23c 0x62c 0x000 0x3 0x0
-#define MX51_PAD_UART2_TXD__UART2_TXD			0x23c 0x62c 0x000 0x0 0x0
-#define MX51_PAD_UART3_RXD__CSI1_D0			0x240 0x630 0x000 0x2 0x0
-#define MX51_PAD_UART3_RXD__GPIO1_22			0x240 0x630 0x000 0x3 0x0
-#define MX51_PAD_UART3_RXD__UART1_DTR			0x240 0x630 0x000 0x0 0x0
-#define MX51_PAD_UART3_RXD__UART3_RXD			0x240 0x630 0x9f4 0x1 0x4
-#define MX51_PAD_UART3_TXD__CSI1_D1			0x244 0x634 0x000 0x2 0x0
-#define MX51_PAD_UART3_TXD__GPIO1_23			0x244 0x634 0x000 0x3 0x0
-#define MX51_PAD_UART3_TXD__UART1_DSR			0x244 0x634 0x000 0x0 0x0
-#define MX51_PAD_UART3_TXD__UART3_TXD			0x244 0x634 0x000 0x1 0x0
-#define MX51_PAD_OWIRE_LINE__GPIO1_24			0x248 0x638 0x000 0x3 0x0
-#define MX51_PAD_OWIRE_LINE__OWIRE_LINE			0x248 0x638 0x000 0x0 0x0
-#define MX51_PAD_OWIRE_LINE__SPDIF_OUT			0x248 0x638 0x000 0x6 0x0
-#define MX51_PAD_KEY_ROW0__KEY_ROW0			0x24c 0x63c 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW1__KEY_ROW1			0x250 0x640 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW2__KEY_ROW2			0x254 0x644 0x000 0x0 0x0
-#define MX51_PAD_KEY_ROW3__KEY_ROW3			0x258 0x648 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL0__KEY_COL0			0x25c 0x64c 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL0__PLL1_BYP			0x25c 0x64c 0x90c 0x7 0x0
-#define MX51_PAD_KEY_COL1__KEY_COL1			0x260 0x650 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL1__PLL2_BYP			0x260 0x650 0x910 0x7 0x0
-#define MX51_PAD_KEY_COL2__KEY_COL2			0x264 0x654 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL2__PLL3_BYP			0x264 0x654 0x000 0x7 0x0
-#define MX51_PAD_KEY_COL3__KEY_COL3			0x268 0x658 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL4__I2C2_SCL			0x26c 0x65c 0x9b8 0x3 0x1
-#define MX51_PAD_KEY_COL4__KEY_COL4			0x26c 0x65c 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL4__SPDIF_OUT1			0x26c 0x65c 0x000 0x6 0x0
-#define MX51_PAD_KEY_COL4__UART1_RI			0x26c 0x65c 0x000 0x1 0x0
-#define MX51_PAD_KEY_COL4__UART3_RTS			0x26c 0x65c 0x9f0 0x2 0x4
-#define MX51_PAD_KEY_COL5__I2C2_SDA			0x270 0x660 0x9bc 0x3 0x1
-#define MX51_PAD_KEY_COL5__KEY_COL5			0x270 0x660 0x000 0x0 0x0
-#define MX51_PAD_KEY_COL5__UART1_DCD			0x270 0x660 0x000 0x1 0x0
-#define MX51_PAD_KEY_COL5__UART3_CTS			0x270 0x660 0x000 0x2 0x0
-#define MX51_PAD_USBH1_CLK__CSPI_SCLK			0x278 0x678 0x914 0x1 0x1
-#define MX51_PAD_USBH1_CLK__GPIO1_25			0x278 0x678 0x000 0x2 0x0
-#define MX51_PAD_USBH1_CLK__I2C2_SCL			0x278 0x678 0x9b8 0x5 0x2
-#define MX51_PAD_USBH1_CLK__USBH1_CLK			0x278 0x678 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DIR__CSPI_MOSI			0x27c 0x67c 0x91c 0x1 0x1
-#define MX51_PAD_USBH1_DIR__GPIO1_26			0x27c 0x67c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DIR__I2C2_SDA			0x27c 0x67c 0x9bc 0x5 0x2
-#define MX51_PAD_USBH1_DIR__USBH1_DIR			0x27c 0x67c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_STP__CSPI_RDY			0x280 0x680 0x000 0x1 0x0
-#define MX51_PAD_USBH1_STP__GPIO1_27			0x280 0x680 0x000 0x2 0x0
-#define MX51_PAD_USBH1_STP__UART3_RXD			0x280 0x680 0x9f4 0x5 0x6
-#define MX51_PAD_USBH1_STP__USBH1_STP			0x280 0x680 0x000 0x0 0x0
-#define MX51_PAD_USBH1_NXT__CSPI_MISO			0x284 0x684 0x918 0x1 0x0
-#define MX51_PAD_USBH1_NXT__GPIO1_28			0x284 0x684 0x000 0x2 0x0
-#define MX51_PAD_USBH1_NXT__UART3_TXD			0x284 0x684 0x000 0x5 0x0
-#define MX51_PAD_USBH1_NXT__USBH1_NXT			0x284 0x684 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA0__GPIO1_11			0x288 0x688 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA0__UART2_CTS			0x288 0x688 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0		0x288 0x688 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA1__GPIO1_12			0x28c 0x68c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA1__UART2_RXD			0x28c 0x68c 0x9ec 0x1 0x4
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1		0x28c 0x68c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA2__GPIO1_13			0x290 0x690 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA2__UART2_TXD			0x290 0x690 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2		0x290 0x690 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA3__GPIO1_14			0x294 0x694 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA3__UART2_RTS			0x294 0x694 0x9e8 0x1 0x5
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3		0x294 0x694 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA4__CSPI_SS0			0x298 0x698 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA4__GPIO1_15			0x298 0x698 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4		0x298 0x698 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA5__CSPI_SS1			0x29c 0x69c 0x920 0x1 0x0
-#define MX51_PAD_USBH1_DATA5__GPIO1_16			0x29c 0x69c 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5		0x29c 0x69c 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA6__CSPI_SS3			0x2a0 0x6a0 0x928 0x1 0x1
-#define MX51_PAD_USBH1_DATA6__GPIO1_17			0x2a0 0x6a0 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6		0x2a0 0x6a0 0x000 0x0 0x0
-#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3		0x2a4 0x6a4 0x000 0x1 0x0
-#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3		0x2a4 0x6a4 0x934 0x5 0x1
-#define MX51_PAD_USBH1_DATA7__GPIO1_18			0x2a4 0x6a4 0x000 0x2 0x0
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7		0x2a4 0x6a4 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN11__DI1_PIN11			0x2a8 0x6a8 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN11__ECSPI1_SS2			0x2a8 0x6a8 0x000 0x7 0x0
-#define MX51_PAD_DI1_PIN11__GPIO3_0			0x2a8 0x6a8 0x000 0x4 0x0
-#define MX51_PAD_DI1_PIN12__DI1_PIN12			0x2ac 0x6ac 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN12__GPIO3_1			0x2ac 0x6ac 0x978 0x4 0x1
-#define MX51_PAD_DI1_PIN13__DI1_PIN13			0x2b0 0x6b0 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN13__GPIO3_2			0x2b0 0x6b0 0x97c 0x4 0x1
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS			0x2b4 0x6b4 0x000 0x0 0x0
-#define MX51_PAD_DI1_D0_CS__GPIO3_3			0x2b4 0x6b4 0x980 0x4 0x1
-#define MX51_PAD_DI1_D1_CS__DI1_D1_CS			0x2b8 0x6b8 0x000 0x0 0x0
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN14			0x2b8 0x6b8 0x000 0x2 0x0
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN5			0x2b8 0x6b8 0x000 0x3 0x0
-#define MX51_PAD_DI1_D1_CS__GPIO3_4			0x2b8 0x6b8 0x984 0x4 0x1
-#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1		0x2bc 0x6bc 0x9a4 0x2 0x1
-#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN		0x2bc 0x6bc 0x9c4 0x0 0x0
-#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5		0x2bc 0x6bc 0x988 0x4 0x1
-#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6		0x2c0 0x6c0 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO		0x2c0 0x6c0 0x9c4 0x0 0x1
-#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6		0x2c0 0x6c0 0x98c 0x4 0x1
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17		0x2c4 0x6c4 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7		0x2c4 0x6c4 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		0x2c4 0x6c4 0x000 0x0 0x0
-#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7		0x2c4 0x6c4 0x990 0x4 0x1
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK		0x2c8 0x6c8 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16		0x2c8 0x6c8 0x000 0x2 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8		0x2c8 0x6c8 0x000 0x3 0x0
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		0x2c8 0x6c8 0x000 0x0 0x0
-#define MX51_PAD_DISPB2_SER_RS__GPIO3_8			0x2c8 0x6c8 0x994 0x4 0x1
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0			0x2cc 0x6cc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1			0x2d0 0x6d0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2			0x2d4 0x6d4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3			0x2d8 0x6d8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4			0x2dc 0x6dc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5			0x2e0 0x6e0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC		0x2e4 0x6e4 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6			0x2e4 0x6e4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG		0x2e8 0x6e8 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7			0x2e8 0x6e8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT8__BOOT_SRC0			0x2ec 0x6ec 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8			0x2ec 0x6ec 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT9__BOOT_SRC1			0x2f0 0x6f0 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9			0x2f0 0x6f0 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE		0x2f4 0x6f4 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10		0x2f4 0x6f4 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2		0x2f8 0x6f8 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11		0x2f8 0x6f8 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL		0x2fc 0x6fc 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12		0x2fc 0x6fc 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0		0x300 0x700 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13		0x300 0x700 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1		0x304 0x704 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14		0x304 0x704 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH		0x308 0x708 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15		0x308 0x708 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0		0x30c 0x70c 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16		0x30c 0x70c 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1		0x310 0x710 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17		0x310 0x710 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0		0x314 0x714 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18		0x314 0x714 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN11		0x314 0x714 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN5		0x314 0x714 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1		0x318 0x718 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19		0x318 0x718 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN12		0x318 0x718 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN6		0x318 0x718 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0		0x31c 0x71c 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20		0x31c 0x71c 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN13		0x31c 0x71c 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN7		0x31c 0x71c 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1		0x320 0x720 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21		0x320 0x720 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN14		0x320 0x720 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN8		0x320 0x720 0x000 0x4 0x0
-#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0		0x324 0x724 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22		0x324 0x724 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS		0x324 0x724 0x000 0x6 0x0
-#define MX51_PAD_DISP1_DAT22__DISP2_DAT16		0x324 0x724 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1		0x328 0x728 0x000 0x7 0x0
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23		0x328 0x728 0x000 0x0 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS		0x328 0x728 0x000 0x6 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_DAT17		0x328 0x728 0x000 0x5 0x0
-#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS		0x328 0x728 0x000 0x4 0x0
-#define MX51_PAD_DI1_PIN3__DI1_PIN3			0x32c 0x72c 0x000 0x0 0x0
-#define MX51_PAD_DI1_PIN2__DI1_PIN2			0x330 0x734 0x000 0x0 0x0
-#define MX51_PAD_DI_GP2__DISP1_SER_CLK			0x338 0x740 0x000 0x0 0x0
-#define MX51_PAD_DI_GP2__DISP2_WAIT			0x338 0x740 0x9a8 0x2 0x1
-#define MX51_PAD_DI_GP3__CSI1_DATA_EN			0x33c 0x744 0x9a0 0x3 0x1
-#define MX51_PAD_DI_GP3__DISP1_SER_DIO			0x33c 0x744 0x9c0 0x0 0x0
-#define MX51_PAD_DI_GP3__FEC_TX_ER			0x33c 0x744 0x000 0x2 0x0
-#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN			0x340 0x748 0x99c 0x3 0x1
-#define MX51_PAD_DI2_PIN4__DI2_PIN4			0x340 0x748 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN4__FEC_CRS			0x340 0x748 0x950 0x2 0x1
-#define MX51_PAD_DI2_PIN2__DI2_PIN2			0x344 0x74c 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN2__FEC_MDC			0x344 0x74c 0x000 0x2 0x0
-#define MX51_PAD_DI2_PIN3__DI2_PIN3			0x348 0x750 0x000 0x0 0x0
-#define MX51_PAD_DI2_PIN3__FEC_MDIO			0x348 0x750 0x954 0x2 0x1
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK		0x34c 0x754 0x000 0x0 0x0
-#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1		0x34c 0x754 0x95c 0x2 0x1
-#define MX51_PAD_DI_GP4__DI2_PIN15			0x350 0x758 0x000 0x4 0x0
-#define MX51_PAD_DI_GP4__DISP1_SER_DIN			0x350 0x758 0x9c0 0x0 0x1
-#define MX51_PAD_DI_GP4__DISP2_PIN1			0x350 0x758 0x000 0x3 0x0
-#define MX51_PAD_DI_GP4__FEC_RDATA2			0x350 0x758 0x960 0x2 0x1
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0			0x354 0x75c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT0__FEC_RDATA3			0x354 0x75c 0x964 0x2 0x1
-#define MX51_PAD_DISP2_DAT0__KEY_COL6			0x354 0x75c 0x9c8 0x4 0x1
-#define MX51_PAD_DISP2_DAT0__UART3_RXD			0x354 0x75c 0x9f4 0x5 0x8
-#define MX51_PAD_DISP2_DAT0__USBH3_CLK			0x354 0x75c 0x9f8 0x3 0x1
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1			0x358 0x760 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT1__FEC_RX_ER			0x358 0x760 0x970 0x2 0x1
-#define MX51_PAD_DISP2_DAT1__KEY_COL7			0x358 0x760 0x9cc 0x4 0x1
-#define MX51_PAD_DISP2_DAT1__UART3_TXD			0x358 0x760 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT1__USBH3_DIR			0x358 0x760 0xa1c 0x3 0x1
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2			0x35c 0x764 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3			0x360 0x768 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4			0x364 0x76c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5			0x368 0x770 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT6__DISP2_DAT6			0x36c 0x774 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT6__FEC_TDATA1			0x36c 0x774 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT6__GPIO1_19			0x36c 0x774 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT6__KEY_ROW4			0x36c 0x774 0x9d0 0x4 0x1
-#define MX51_PAD_DISP2_DAT6__USBH3_STP			0x36c 0x774 0xa24 0x3 0x1
-#define MX51_PAD_DISP2_DAT7__DISP2_DAT7			0x370 0x778 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT7__FEC_TDATA2			0x370 0x778 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT7__GPIO1_29			0x370 0x778 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT7__KEY_ROW5			0x370 0x778 0x9d4 0x4 0x1
-#define MX51_PAD_DISP2_DAT7__USBH3_NXT			0x370 0x778 0xa20 0x3 0x1
-#define MX51_PAD_DISP2_DAT8__DISP2_DAT8			0x374 0x77c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT8__FEC_TDATA3			0x374 0x77c 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT8__GPIO1_30			0x374 0x77c 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT8__KEY_ROW6			0x374 0x77c 0x9d8 0x4 0x1
-#define MX51_PAD_DISP2_DAT8__USBH3_DATA0		0x374 0x77c 0x9fc 0x3 0x1
-#define MX51_PAD_DISP2_DAT9__AUD6_RXC			0x378 0x780 0x8f4 0x4 0x1
-#define MX51_PAD_DISP2_DAT9__DISP2_DAT9			0x378 0x780 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT9__FEC_TX_EN			0x378 0x780 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT9__GPIO1_31			0x378 0x780 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT9__USBH3_DATA1		0x378 0x780 0xa00 0x3 0x1
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10		0x37c 0x784 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS		0x37c 0x784 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT10__FEC_COL			0x37c 0x784 0x94c 0x2 0x1
-#define MX51_PAD_DISP2_DAT10__KEY_ROW7			0x37c 0x784 0x9dc 0x4 0x1
-#define MX51_PAD_DISP2_DAT10__USBH3_DATA2		0x37c 0x784 0xa04 0x3 0x1
-#define MX51_PAD_DISP2_DAT11__AUD6_TXD			0x380 0x788 0x8f0 0x4 0x1
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11		0x380 0x788 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK		0x380 0x788 0x968 0x2 0x1
-#define MX51_PAD_DISP2_DAT11__GPIO1_10			0x380 0x788 0x000 0x7 0x0
-#define MX51_PAD_DISP2_DAT11__USBH3_DATA3		0x380 0x788 0xa08 0x3 0x1
-#define MX51_PAD_DISP2_DAT12__AUD6_RXD			0x384 0x78c 0x8ec 0x4 0x1
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12		0x384 0x78c 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT12__FEC_RX_DV			0x384 0x78c 0x96c 0x2 0x1
-#define MX51_PAD_DISP2_DAT12__USBH3_DATA4		0x384 0x78c 0xa0c 0x3 0x1
-#define MX51_PAD_DISP2_DAT13__AUD6_TXC			0x388 0x790 0x8fc 0x4 0x1
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13		0x388 0x790 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK		0x388 0x790 0x974 0x2 0x1
-#define MX51_PAD_DISP2_DAT13__USBH3_DATA5		0x388 0x790 0xa10 0x3 0x1
-#define MX51_PAD_DISP2_DAT14__AUD6_TXFS			0x38c 0x794 0x900 0x4 0x1
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14		0x38c 0x794 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT14__FEC_RDATA0		0x38c 0x794 0x958 0x2 0x1
-#define MX51_PAD_DISP2_DAT14__USBH3_DATA6		0x38c 0x794 0xa14 0x3 0x1
-#define MX51_PAD_DISP2_DAT15__AUD6_RXFS			0x390 0x798 0x8f8 0x4 0x1
-#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS		0x390 0x798 0x000 0x5 0x0
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15		0x390 0x798 0x000 0x0 0x0
-#define MX51_PAD_DISP2_DAT15__FEC_TDATA0		0x390 0x798 0x000 0x2 0x0
-#define MX51_PAD_DISP2_DAT15__USBH3_DATA7		0x390 0x798 0xa18 0x3 0x1
-#define MX51_PAD_SD1_CMD__AUD5_RXFS			0x394 0x79c 0x8e0 0x1 0x1
-#define MX51_PAD_SD1_CMD__CSPI_MOSI			0x394 0x79c 0x91c 0x2 0x2
-#define MX51_PAD_SD1_CMD__SD1_CMD			0x394 0x79c 0x000 0x0 0x0
-#define MX51_PAD_SD1_CLK__AUD5_RXC			0x398 0x7a0 0x8dc 0x1 0x1
-#define MX51_PAD_SD1_CLK__CSPI_SCLK			0x398 0x7a0 0x914 0x2 0x2
-#define MX51_PAD_SD1_CLK__SD1_CLK			0x398 0x7a0 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA0__AUD5_TXD			0x39c 0x7a4 0x8d8 0x1 0x2
-#define MX51_PAD_SD1_DATA0__CSPI_MISO			0x39c 0x7a4 0x918 0x2 0x1
-#define MX51_PAD_SD1_DATA0__SD1_DATA0			0x39c 0x7a4 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA0__EIM_DA0			0x01c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA1__EIM_DA1			0x020 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA2__EIM_DA2			0x024 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA3__EIM_DA3			0x028 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA1__AUD5_RXD			0x3a0 0x7a8 0x8d4 0x1 0x2
-#define MX51_PAD_SD1_DATA1__SD1_DATA1			0x3a0 0x7a8 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA4__EIM_DA4			0x02c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA5__EIM_DA5			0x030 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA6__EIM_DA6			0x034 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA7__EIM_DA7			0x038 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA2__AUD5_TXC			0x3a4 0x7ac 0x8e4 0x1 0x2
-#define MX51_PAD_SD1_DATA2__SD1_DATA2			0x3a4 0x7ac 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA10__EIM_DA10			0x044 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA11__EIM_DA11			0x048 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA8__EIM_DA8			0x03c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA9__EIM_DA9			0x040 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS			0x3a8 0x7b0 0x8e8 0x1 0x2
-#define MX51_PAD_SD1_DATA3__CSPI_SS1			0x3a8 0x7b0 0x920 0x2 0x1
-#define MX51_PAD_SD1_DATA3__SD1_DATA3			0x3a8 0x7b0 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_0__CSPI_SS2			0x3ac 0x7b4 0x924 0x2 0x0
-#define MX51_PAD_GPIO1_0__GPIO1_0			0x3ac 0x7b4 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_0__SD1_CD			0x3ac 0x7b4 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_1__CSPI_MISO			0x3b0 0x7b8 0x918 0x2 0x2
-#define MX51_PAD_GPIO1_1__GPIO1_1			0x3b0 0x7b8 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_1__SD1_WP			0x3b0 0x7b8 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA12__EIM_DA12			0x04c 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA13__EIM_DA13			0x050 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA14__EIM_DA14			0x054 0x000 0x000 0x0 0x0
-#define MX51_PAD_EIM_DA15__EIM_DA15			0x058 0x000 0x000 0x0 0x0
-#define MX51_PAD_SD2_CMD__CSPI_MOSI			0x3b4 0x7bc 0x91c 0x2 0x3
-#define MX51_PAD_SD2_CMD__I2C1_SCL			0x3b4 0x7bc 0x9b0 0x1 0x2
-#define MX51_PAD_SD2_CMD__SD2_CMD			0x3b4 0x7bc 0x000 0x0 0x0
-#define MX51_PAD_SD2_CLK__CSPI_SCLK			0x3b8 0x7c0 0x914 0x2 0x3
-#define MX51_PAD_SD2_CLK__I2C1_SDA			0x3b8 0x7c0 0x9b4 0x1 0x2
-#define MX51_PAD_SD2_CLK__SD2_CLK			0x3b8 0x7c0 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA0__CSPI_MISO			0x3bc 0x7c4 0x918 0x2 0x3
-#define MX51_PAD_SD2_DATA0__SD1_DAT4			0x3bc 0x7c4 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA0__SD2_DATA0			0x3bc 0x7c4 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA1__SD1_DAT5			0x3c0 0x7c8 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA1__SD2_DATA1			0x3c0 0x7c8 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP			0x3c0 0x7c8 0x000 0x2 0x0
-#define MX51_PAD_SD2_DATA2__SD1_DAT6			0x3c4 0x7cc 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA2__SD2_DATA2			0x3c4 0x7cc 0x000 0x0 0x0
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM			0x3c4 0x7cc 0x000 0x2 0x0
-#define MX51_PAD_SD2_DATA3__CSPI_SS2			0x3c8 0x7d0 0x924 0x2 0x1
-#define MX51_PAD_SD2_DATA3__SD1_DAT7			0x3c8 0x7d0 0x000 0x1 0x0
-#define MX51_PAD_SD2_DATA3__SD2_DATA3			0x3c8 0x7d0 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_2__CCM_OUT_2			0x3cc 0x7d4 0x000 0x5 0x0
-#define MX51_PAD_GPIO1_2__GPIO1_2			0x3cc 0x7d4 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_2__I2C2_SCL			0x3cc 0x7d4 0x9b8 0x2 0x3
-#define MX51_PAD_GPIO1_2__PLL1_BYP			0x3cc 0x7d4 0x90c 0x7 0x1
-#define MX51_PAD_GPIO1_2__PWM1_PWMO			0x3cc 0x7d4 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_3__GPIO1_3			0x3d0 0x7d8 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_3__I2C2_SDA			0x3d0 0x7d8 0x9bc 0x2 0x3
-#define MX51_PAD_GPIO1_3__PLL2_BYP			0x3d0 0x7d8 0x910 0x7 0x1
-#define MX51_PAD_GPIO1_3__PWM2_PWMO			0x3d0 0x7d8 0x000 0x1 0x0
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ		0x3d4 0x7fc 0x000 0x0 0x0
-#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B		0x3d4 0x7fc 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK			0x3d8 0x804 0x908 0x4 0x1
-#define MX51_PAD_GPIO1_4__EIM_RDY			0x3d8 0x804 0x938 0x3 0x1
-#define MX51_PAD_GPIO1_4__GPIO1_4			0x3d8 0x804 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B			0x3d8 0x804 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_5__CSI2_MCLK			0x3dc 0x808 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_5__DISP2_PIN16			0x3dc 0x808 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_5__GPIO1_5			0x3dc 0x808 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B			0x3dc 0x808 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_6__DISP2_PIN17			0x3e0 0x80c 0x000 0x4 0x0
-#define MX51_PAD_GPIO1_6__GPIO1_6			0x3e0 0x80c 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_6__REF_EN_B			0x3e0 0x80c 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_7__CCM_OUT_0			0x3e4 0x810 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_7__GPIO1_7			0x3e4 0x810 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_7__SD2_WP			0x3e4 0x810 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_7__SPDIF_OUT1			0x3e4 0x810 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_8__CSI2_DATA_EN			0x3e8 0x814 0x99c 0x2 0x2
-#define MX51_PAD_GPIO1_8__GPIO1_8			0x3e8 0x814 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_8__SD2_CD			0x3e8 0x814 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_8__USBH3_PWR			0x3e8 0x814 0x000 0x1 0x0
-#define MX51_PAD_GPIO1_9__CCM_OUT_1			0x3ec 0x818 0x000 0x3 0x0
-#define MX51_PAD_GPIO1_9__DISP2_D1_CS			0x3ec 0x818 0x000 0x2 0x0
-#define MX51_PAD_GPIO1_9__DISP2_SER_CS			0x3ec 0x818 0x000 0x7 0x0
-#define MX51_PAD_GPIO1_9__GPIO1_9			0x3ec 0x818 0x000 0x0 0x0
-#define MX51_PAD_GPIO1_9__SD2_LCTL			0x3ec 0x818 0x000 0x6 0x0
-#define MX51_PAD_GPIO1_9__USBH3_OC			0x3ec 0x818 0x000 0x1 0x0
-
-#endif /* __DTS_IMX51_PINFUNC_H */
diff --git a/src/arm/imx53-pinfunc.h b/src/arm/imx53-pinfunc.h
deleted file mode 100644
index aec406bc65eb..000000000000
--- a/src/arm/imx53-pinfunc.h
+++ /dev/null
@@ -1,1189 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX53_PINFUNC_H
-#define __DTS_IMX53_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX53_PAD_GPIO_19__KPP_COL_5				0x020 0x348 0x840 0x0 0x0
-#define MX53_PAD_GPIO_19__GPIO4_5				0x020 0x348 0x000 0x1 0x0
-#define MX53_PAD_GPIO_19__CCM_CLKO				0x020 0x348 0x000 0x2 0x0
-#define MX53_PAD_GPIO_19__SPDIF_OUT1				0x020 0x348 0x000 0x3 0x0
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2			0x020 0x348 0x000 0x4 0x0
-#define MX53_PAD_GPIO_19__ECSPI1_RDY				0x020 0x348 0x000 0x5 0x0
-#define MX53_PAD_GPIO_19__FEC_TDATA_3				0x020 0x348 0x000 0x6 0x0
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT				0x020 0x348 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL0__KPP_COL_0				0x024 0x34c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL0__GPIO4_6				0x024 0x34c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC			0x024 0x34c 0x758 0x2 0x0
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX			0x024 0x34c 0x000 0x4 0x0
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK				0x024 0x34c 0x79c 0x5 0x0
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3				0x024 0x34c 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST			0x024 0x34c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0				0x028 0x350 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW0__GPIO4_7				0x028 0x350 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD			0x028 0x350 0x74c 0x2 0x0
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX			0x028 0x350 0x890 0x4 0x1
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI				0x028 0x350 0x7a4 0x5 0x0
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER				0x028 0x350 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL1__KPP_COL_1				0x02c 0x354 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL1__GPIO4_8				0x02c 0x354 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS			0x02c 0x354 0x75c 0x2 0x0
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX			0x02c 0x354 0x000 0x4 0x0
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO				0x02c 0x354 0x7a0 0x5 0x0
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK				0x02c 0x354 0x808 0x6 0x0
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY			0x02c 0x354 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1				0x030 0x358 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW1__GPIO4_9				0x030 0x358 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD			0x030 0x358 0x748 0x2 0x0
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX			0x030 0x358 0x898 0x4 0x1
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0				0x030 0x358 0x7a8 0x5 0x0
-#define MX53_PAD_KEY_ROW1__FEC_COL				0x030 0x358 0x800 0x6 0x0
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID			0x030 0x358 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL2__KPP_COL_2				0x034 0x35c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL2__GPIO4_10				0x034 0x35c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN				0x034 0x35c 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL2__FEC_MDIO				0x034 0x35c 0x804 0x4 0x0
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1				0x034 0x35c 0x7ac 0x5 0x0
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2				0x034 0x35c 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE			0x034 0x35c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2				0x038 0x360 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW2__GPIO4_11				0x038 0x360 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN				0x038 0x360 0x760 0x2 0x0
-#define MX53_PAD_KEY_ROW2__FEC_MDC				0x038 0x360 0x000 0x4 0x0
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2				0x038 0x360 0x7b0 0x5 0x0
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2				0x038 0x360 0x000 0x6 0x0
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR			0x038 0x360 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL3__KPP_COL_3				0x03c 0x364 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL3__GPIO4_12				0x03c 0x364 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP				0x03c 0x364 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL3__SPDIF_IN1				0x03c 0x364 0x870 0x3 0x0
-#define MX53_PAD_KEY_COL3__I2C2_SCL				0x03c 0x364 0x81c 0x4 0x0
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3				0x03c 0x364 0x7b4 0x5 0x0
-#define MX53_PAD_KEY_COL3__FEC_CRS				0x03c 0x364 0x000 0x6 0x0
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK			0x03c 0x364 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3				0x040 0x368 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW3__GPIO4_13				0x040 0x368 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM				0x040 0x368 0x000 0x2 0x0
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK			0x040 0x368 0x768 0x3 0x0
-#define MX53_PAD_KEY_ROW3__I2C2_SDA				0x040 0x368 0x820 0x4 0x0
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT			0x040 0x368 0x000 0x5 0x0
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP				0x040 0x368 0x77c 0x6 0x0
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0			0x040 0x368 0x000 0x7 0x0
-#define MX53_PAD_KEY_COL4__KPP_COL_4				0x044 0x36c 0x000 0x0 0x0
-#define MX53_PAD_KEY_COL4__GPIO4_14				0x044 0x36c 0x000 0x1 0x0
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN				0x044 0x36c 0x000 0x2 0x0
-#define MX53_PAD_KEY_COL4__IPU_SISG_4				0x044 0x36c 0x000 0x3 0x0
-#define MX53_PAD_KEY_COL4__UART5_RTS				0x044 0x36c 0x894 0x4 0x0
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC			0x044 0x36c 0x89c 0x5 0x0
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1			0x044 0x36c 0x000 0x7 0x0
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4				0x048 0x370 0x000 0x0 0x0
-#define MX53_PAD_KEY_ROW4__GPIO4_15				0x048 0x370 0x000 0x1 0x0
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN				0x048 0x370 0x764 0x2 0x0
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5				0x048 0x370 0x000 0x3 0x0
-#define MX53_PAD_KEY_ROW4__UART5_CTS				0x048 0x370 0x000 0x4 0x0
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR			0x048 0x370 0x000 0x5 0x0
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID			0x048 0x370 0x000 0x7 0x0
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK			0x04c 0x378 0x000 0x0 0x0
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16				0x04c 0x378 0x000 0x1 0x0
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR			0x04c 0x378 0x000 0x2 0x0
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0		0x04c 0x378 0x000 0x5 0x0
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0			0x04c 0x378 0x000 0x6 0x0
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID			0x04c 0x378 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15			0x050 0x37c 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN15__GPIO4_17				0x050 0x37c 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC			0x050 0x37c 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1		0x050 0x37c 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1			0x050 0x37c 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID			0x050 0x37c 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2				0x054 0x380 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN2__GPIO4_18				0x054 0x380 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD			0x054 0x380 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2		0x054 0x380 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2			0x054 0x380 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION			0x054 0x380 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3				0x058 0x384 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN3__GPIO4_19				0x058 0x384 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS			0x058 0x384 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3		0x058 0x384 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3			0x058 0x384 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG			0x058 0x384 0x000 0x7 0x0
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4				0x05c 0x388 0x000 0x0 0x0
-#define MX53_PAD_DI0_PIN4__GPIO4_20				0x05c 0x388 0x000 0x1 0x0
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD			0x05c 0x388 0x000 0x2 0x0
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP				0x05c 0x388 0x7fc 0x3 0x0
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD			0x05c 0x388 0x000 0x5 0x0
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4			0x05c 0x388 0x000 0x6 0x0
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT		0x05c 0x388 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0			0x060 0x38c 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT0__GPIO4_21				0x060 0x38c 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK				0x060 0x38c 0x780 0x2 0x0
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0		0x060 0x38c 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN		0x060 0x38c 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5			0x060 0x38c 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY			0x060 0x38c 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1			0x064 0x390 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT1__GPIO4_22				0x064 0x390 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI				0x064 0x390 0x788 0x2 0x0
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1		0x064 0x390 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL	0x064 0x390 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6			0x064 0x390 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID			0x064 0x390 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2			0x068 0x394 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT2__GPIO4_23				0x068 0x394 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO				0x068 0x394 0x784 0x2 0x0
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2		0x068 0x394 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE			0x068 0x394 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7			0x068 0x394 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE			0x068 0x394 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3			0x06c 0x398 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT3__GPIO4_24				0x06c 0x398 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0				0x06c 0x398 0x78c 0x2 0x0
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3		0x06c 0x398 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR		0x06c 0x398 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8			0x06c 0x398 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR			0x06c 0x398 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4			0x070 0x39c 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT4__GPIO4_25				0x070 0x39c 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1				0x070 0x39c 0x790 0x2 0x0
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4		0x070 0x39c 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB			0x070 0x39c 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9			0x070 0x39c 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK			0x070 0x39c 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5			0x074 0x3a0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT5__GPIO4_26				0x074 0x3a0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2				0x074 0x3a0 0x794 0x2 0x0
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5		0x074 0x3a0 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS		0x074 0x3a0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10			0x074 0x3a0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0		0x074 0x3a0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6			0x078 0x3a4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT6__GPIO4_27				0x078 0x3a4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3				0x078 0x3a4 0x798 0x2 0x0
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6		0x078 0x3a4 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE		0x078 0x3a4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11			0x078 0x3a4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1		0x078 0x3a4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7			0x07c 0x3a8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT7__GPIO4_28				0x07c 0x3a8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY				0x07c 0x3a8 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7		0x07c 0x3a8 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0		0x07c 0x3a8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12			0x07c 0x3a8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID			0x07c 0x3a8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8			0x080 0x3ac 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT8__GPIO4_29				0x080 0x3ac 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO				0x080 0x3ac 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B			0x080 0x3ac 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1		0x080 0x3ac 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13			0x080 0x3ac 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID			0x080 0x3ac 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9			0x084 0x3b0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT9__GPIO4_30				0x084 0x3b0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO				0x084 0x3b0 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B			0x084 0x3b0 0x000 0x3 0x0
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2		0x084 0x3b0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14			0x084 0x3b0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0			0x084 0x3b0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10			0x088 0x3b4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT10__GPIO4_31				0x088 0x3b4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP			0x088 0x3b4 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	0x088 0x3b4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15			0x088 0x3b4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1			0x088 0x3b4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11			0x08c 0x3b8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT11__GPIO5_5				0x08c 0x3b8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT			0x08c 0x3b8 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4	0x08c 0x3b8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16			0x08c 0x3b8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2			0x08c 0x3b8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12			0x090 0x3bc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT12__GPIO5_6				0x090 0x3bc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK			0x090 0x3bc 0x000 0x2 0x0
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5	0x090 0x3bc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17			0x090 0x3bc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3			0x090 0x3bc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13			0x094 0x3c0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT13__GPIO5_7				0x094 0x3c0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS			0x094 0x3c0 0x754 0x3 0x0
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0	0x094 0x3c0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18			0x094 0x3c0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4			0x094 0x3c0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14			0x098 0x3c4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT14__GPIO5_8				0x098 0x3c4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC			0x098 0x3c4 0x750 0x3 0x0
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1	0x098 0x3c4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19			0x098 0x3c4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5			0x098 0x3c4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15			0x09c 0x3c8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT15__GPIO5_9				0x09c 0x3c8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1			0x09c 0x3c8 0x7ac 0x2 0x1
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1			0x09c 0x3c8 0x7c8 0x3 0x0
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2	0x09c 0x3c8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20			0x09c 0x3c8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6			0x09c 0x3c8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16			0x0a0 0x3cc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT16__GPIO5_10				0x0a0 0x3cc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI			0x0a0 0x3cc 0x7c0 0x2 0x0
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC			0x0a0 0x3cc 0x758 0x3 0x1
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0			0x0a0 0x3cc 0x868 0x4 0x0
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3	0x0a0 0x3cc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21			0x0a0 0x3cc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7			0x0a0 0x3cc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17			0x0a4 0x3d0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT17__GPIO5_11				0x0a4 0x3d0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO			0x0a4 0x3d0 0x7bc 0x2 0x0
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD			0x0a4 0x3d0 0x74c 0x3 0x1
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1			0x0a4 0x3d0 0x86c 0x4 0x0
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4	0x0a4 0x3d0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22			0x0a4 0x3d0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18			0x0a8 0x3d4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT18__GPIO5_12				0x0a8 0x3d4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0			0x0a8 0x3d4 0x7c4 0x2 0x0
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS			0x0a8 0x3d4 0x75c 0x3 0x1
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS			0x0a8 0x3d4 0x73c 0x4 0x0
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5	0x0a8 0x3d4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23			0x0a8 0x3d4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2			0x0a8 0x3d4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19			0x0ac 0x3d8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT19__GPIO5_13				0x0ac 0x3d8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK			0x0ac 0x3d8 0x7b8 0x2 0x0
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD			0x0ac 0x3d8 0x748 0x3 0x1
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC			0x0ac 0x3d8 0x738 0x4 0x0
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6	0x0ac 0x3d8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24			0x0ac 0x3d8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3			0x0ac 0x3d8 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20			0x0b0 0x3dc 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT20__GPIO5_14				0x0b0 0x3dc 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK			0x0b0 0x3dc 0x79c 0x2 0x1
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC			0x0b0 0x3dc 0x740 0x3 0x0
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7	0x0b0 0x3dc 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25			0x0b0 0x3dc 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI			0x0b0 0x3dc 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21			0x0b4 0x3e0 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT21__GPIO5_15				0x0b4 0x3e0 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI			0x0b4 0x3e0 0x7a4 0x2 0x1
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD			0x0b4 0x3e0 0x734 0x3 0x0
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0		0x0b4 0x3e0 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26			0x0b4 0x3e0 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO			0x0b4 0x3e0 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22			0x0b8 0x3e4 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT22__GPIO5_16				0x0b8 0x3e4 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO			0x0b8 0x3e4 0x7a0 0x2 0x1
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS			0x0b8 0x3e4 0x744 0x3 0x0
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1		0x0b8 0x3e4 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27			0x0b8 0x3e4 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK			0x0b8 0x3e4 0x000 0x7 0x0
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23			0x0bc 0x3e8 0x000 0x0 0x0
-#define MX53_PAD_DISP0_DAT23__GPIO5_17				0x0bc 0x3e8 0x000 0x1 0x0
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0			0x0bc 0x3e8 0x7a8 0x2 0x1
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD			0x0bc 0x3e8 0x730 0x3 0x0
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2		0x0bc 0x3e8 0x000 0x5 0x0
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28			0x0bc 0x3e8 0x000 0x6 0x0
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS			0x0bc 0x3e8 0x000 0x7 0x0
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK			0x0c0 0x3ec 0x000 0x0 0x0
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18				0x0c0 0x3ec 0x000 0x1 0x0
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0			0x0c0 0x3ec 0x000 0x5 0x0
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29			0x0c0 0x3ec 0x000 0x6 0x0
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC			0x0c4 0x3f0 0x000 0x0 0x0
-#define MX53_PAD_CSI0_MCLK__GPIO5_19				0x0c4 0x3f0 0x000 0x1 0x0
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK			0x0c4 0x3f0 0x000 0x2 0x0
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1			0x0c4 0x3f0 0x000 0x5 0x0
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30			0x0c4 0x3f0 0x000 0x6 0x0
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL				0x0c4 0x3f0 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN			0x0c8 0x3f4 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20				0x0c8 0x3f4 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2			0x0c8 0x3f4 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31			0x0c8 0x3f4 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK			0x0c8 0x3f4 0x000 0x7 0x0
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC			0x0cc 0x3f8 0x000 0x0 0x0
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21				0x0cc 0x3f8 0x000 0x1 0x0
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3			0x0cc 0x3f8 0x000 0x5 0x0
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32			0x0cc 0x3f8 0x000 0x6 0x0
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0			0x0cc 0x3f8 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4			0x0d0 0x3fc 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT4__GPIO5_22				0x0d0 0x3fc 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5				0x0d0 0x3fc 0x840 0x2 0x1
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK				0x0d0 0x3fc 0x79c 0x3 0x2
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP			0x0d0 0x3fc 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC			0x0d0 0x3fc 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33			0x0d0 0x3fc 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1			0x0d0 0x3fc 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5			0x0d4 0x400 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT5__GPIO5_23				0x0d4 0x400 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5				0x0d4 0x400 0x84c 0x2 0x0
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI				0x0d4 0x400 0x7a4 0x3 0x2
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT			0x0d4 0x400 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD			0x0d4 0x400 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34			0x0d4 0x400 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2			0x0d4 0x400 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6			0x0d8 0x404 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT6__GPIO5_24				0x0d8 0x404 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6				0x0d8 0x404 0x844 0x2 0x0
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO				0x0d8 0x404 0x7a0 0x3 0x2
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK			0x0d8 0x404 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS			0x0d8 0x404 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35			0x0d8 0x404 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3			0x0d8 0x404 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7			0x0dc 0x408 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT7__GPIO5_25				0x0dc 0x408 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6				0x0dc 0x408 0x850 0x2 0x0
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0				0x0dc 0x408 0x7a8 0x3 0x2
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR			0x0dc 0x408 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD			0x0dc 0x408 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36			0x0dc 0x408 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4			0x0dc 0x408 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8			0x0e0 0x40c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT8__GPIO5_26				0x0e0 0x40c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7				0x0e0 0x40c 0x848 0x2 0x0
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK				0x0e0 0x40c 0x7b8 0x3 0x1
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC			0x0e0 0x40c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA				0x0e0 0x40c 0x818 0x5 0x0
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37			0x0e0 0x40c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5			0x0e0 0x40c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9			0x0e4 0x410 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT9__GPIO5_27				0x0e4 0x410 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7				0x0e4 0x410 0x854 0x2 0x0
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI				0x0e4 0x410 0x7c0 0x3 0x1
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR			0x0e4 0x410 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL				0x0e4 0x410 0x814 0x5 0x0
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38			0x0e4 0x410 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6			0x0e4 0x410 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10			0x0e8 0x414 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT10__GPIO5_28				0x0e8 0x414 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX			0x0e8 0x414 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO			0x0e8 0x414 0x7bc 0x3 0x1
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC			0x0e8 0x414 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4			0x0e8 0x414 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39			0x0e8 0x414 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7			0x0e8 0x414 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11			0x0ec 0x418 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT11__GPIO5_29				0x0ec 0x418 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX			0x0ec 0x418 0x878 0x2 0x1
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0				0x0ec 0x418 0x7c4 0x3 0x1
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS			0x0ec 0x418 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5			0x0ec 0x418 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40			0x0ec 0x418 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8			0x0ec 0x418 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12			0x0f0 0x41c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT12__GPIO5_30				0x0f0 0x41c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX			0x0f0 0x41c 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0		0x0f0 0x41c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6			0x0f0 0x41c 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41			0x0f0 0x41c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9			0x0f0 0x41c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13			0x0f4 0x420 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT13__GPIO5_31				0x0f4 0x420 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX			0x0f4 0x420 0x890 0x2 0x3
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1		0x0f4 0x420 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7			0x0f4 0x420 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42			0x0f4 0x420 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10			0x0f4 0x420 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14			0x0f8 0x424 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT14__GPIO6_0				0x0f8 0x424 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX			0x0f8 0x424 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2		0x0f8 0x424 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8			0x0f8 0x424 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43			0x0f8 0x424 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11			0x0f8 0x424 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15			0x0fc 0x428 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT15__GPIO6_1				0x0fc 0x428 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX			0x0fc 0x428 0x898 0x2 0x3
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3		0x0fc 0x428 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9			0x0fc 0x428 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44			0x0fc 0x428 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12			0x0fc 0x428 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16			0x100 0x42c 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT16__GPIO6_2				0x100 0x42c 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT16__UART4_RTS				0x100 0x42c 0x88c 0x2 0x0
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4		0x100 0x42c 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10			0x100 0x42c 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45			0x100 0x42c 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13			0x100 0x42c 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17			0x104 0x430 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT17__GPIO6_3				0x104 0x430 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT17__UART4_CTS				0x104 0x430 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5		0x104 0x430 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11			0x104 0x430 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46			0x104 0x430 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14			0x104 0x430 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18			0x108 0x434 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT18__GPIO6_4				0x108 0x434 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT18__UART5_RTS				0x108 0x434 0x894 0x2 0x2
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6		0x108 0x434 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12			0x108 0x434 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47			0x108 0x434 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15			0x108 0x434 0x000 0x7 0x0
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19			0x10c 0x438 0x000 0x0 0x0
-#define MX53_PAD_CSI0_DAT19__GPIO6_5				0x10c 0x438 0x000 0x1 0x0
-#define MX53_PAD_CSI0_DAT19__UART5_CTS				0x10c 0x438 0x000 0x2 0x0
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7		0x10c 0x438 0x000 0x4 0x0
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13			0x10c 0x438 0x000 0x5 0x0
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48			0x10c 0x438 0x000 0x6 0x0
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK			0x10c 0x438 0x000 0x7 0x0
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25				0x110 0x458 0x000 0x0 0x0
-#define MX53_PAD_EIM_A25__GPIO5_2				0x110 0x458 0x000 0x1 0x0
-#define MX53_PAD_EIM_A25__ECSPI2_RDY				0x110 0x458 0x000 0x2 0x0
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12				0x110 0x458 0x000 0x3 0x0
-#define MX53_PAD_EIM_A25__CSPI_SS1				0x110 0x458 0x790 0x4 0x1
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS				0x110 0x458 0x000 0x6 0x0
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK			0x110 0x458 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2				0x114 0x45c 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB2__GPIO2_30				0x114 0x45c 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK			0x114 0x45c 0x76c 0x2 0x0
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS			0x114 0x45c 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0				0x114 0x45c 0x7a8 0x4 0x3
-#define MX53_PAD_EIM_EB2__I2C2_SCL				0x114 0x45c 0x81c 0x5 0x1
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16				0x118 0x460 0x000 0x0 0x0
-#define MX53_PAD_EIM_D16__GPIO3_16				0x118 0x460 0x000 0x1 0x0
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5				0x118 0x460 0x000 0x2 0x0
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK			0x118 0x460 0x000 0x3 0x0
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK				0x118 0x460 0x79c 0x4 0x3
-#define MX53_PAD_EIM_D16__I2C2_SDA				0x118 0x460 0x820 0x5 0x1
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17				0x11c 0x464 0x000 0x0 0x0
-#define MX53_PAD_EIM_D17__GPIO3_17				0x11c 0x464 0x000 0x1 0x0
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6				0x11c 0x464 0x000 0x2 0x0
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN			0x11c 0x464 0x830 0x3 0x0
-#define MX53_PAD_EIM_D17__ECSPI1_MISO				0x11c 0x464 0x7a0 0x4 0x3
-#define MX53_PAD_EIM_D17__I2C3_SCL				0x11c 0x464 0x824 0x5 0x0
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18				0x120 0x468 0x000 0x0 0x0
-#define MX53_PAD_EIM_D18__GPIO3_18				0x120 0x468 0x000 0x1 0x0
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7				0x120 0x468 0x000 0x2 0x0
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO			0x120 0x468 0x830 0x3 0x1
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI				0x120 0x468 0x7a4 0x4 0x3
-#define MX53_PAD_EIM_D18__I2C3_SDA				0x120 0x468 0x828 0x5 0x0
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS				0x120 0x468 0x000 0x6 0x0
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19				0x124 0x46c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D19__GPIO3_19				0x124 0x46c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8				0x124 0x46c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS			0x124 0x46c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D19__ECSPI1_SS1				0x124 0x46c 0x7ac 0x4 0x2
-#define MX53_PAD_EIM_D19__EPIT1_EPITO				0x124 0x46c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D19__UART1_CTS				0x124 0x46c 0x000 0x6 0x0
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC			0x124 0x46c 0x8a4 0x7 0x0
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20				0x128 0x470 0x000 0x0 0x0
-#define MX53_PAD_EIM_D20__GPIO3_20				0x128 0x470 0x000 0x1 0x0
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16				0x128 0x470 0x000 0x2 0x0
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS			0x128 0x470 0x000 0x3 0x0
-#define MX53_PAD_EIM_D20__CSPI_SS0				0x128 0x470 0x78c 0x4 0x1
-#define MX53_PAD_EIM_D20__EPIT2_EPITO				0x128 0x470 0x000 0x5 0x0
-#define MX53_PAD_EIM_D20__UART1_RTS				0x128 0x470 0x874 0x6 0x1
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR			0x128 0x470 0x000 0x7 0x0
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21				0x12c 0x474 0x000 0x0 0x0
-#define MX53_PAD_EIM_D21__GPIO3_21				0x12c 0x474 0x000 0x1 0x0
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17				0x12c 0x474 0x000 0x2 0x0
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK			0x12c 0x474 0x000 0x3 0x0
-#define MX53_PAD_EIM_D21__CSPI_SCLK				0x12c 0x474 0x780 0x4 0x1
-#define MX53_PAD_EIM_D21__I2C1_SCL				0x12c 0x474 0x814 0x5 0x1
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC			0x12c 0x474 0x89c 0x6 0x1
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22				0x130 0x478 0x000 0x0 0x0
-#define MX53_PAD_EIM_D22__GPIO3_22				0x130 0x478 0x000 0x1 0x0
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1				0x130 0x478 0x000 0x2 0x0
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN			0x130 0x478 0x82c 0x3 0x0
-#define MX53_PAD_EIM_D22__CSPI_MISO				0x130 0x478 0x784 0x4 0x1
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR			0x130 0x478 0x000 0x6 0x0
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23				0x134 0x47c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D23__GPIO3_23				0x134 0x47c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D23__UART3_CTS				0x134 0x47c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D23__UART1_DCD				0x134 0x47c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS				0x134 0x47c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2				0x134 0x47c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN			0x134 0x47c 0x834 0x6 0x0
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14				0x134 0x47c 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3				0x138 0x480 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB3__GPIO2_31				0x138 0x480 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB3__UART3_RTS				0x138 0x480 0x884 0x2 0x1
-#define MX53_PAD_EIM_EB3__UART1_RI				0x138 0x480 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3				0x138 0x480 0x000 0x5 0x0
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC			0x138 0x480 0x838 0x6 0x0
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16				0x138 0x480 0x000 0x7 0x0
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24				0x13c 0x484 0x000 0x0 0x0
-#define MX53_PAD_EIM_D24__GPIO3_24				0x13c 0x484 0x000 0x1 0x0
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX				0x13c 0x484 0x000 0x2 0x0
-#define MX53_PAD_EIM_D24__ECSPI1_SS2				0x13c 0x484 0x7b0 0x3 0x1
-#define MX53_PAD_EIM_D24__CSPI_SS2				0x13c 0x484 0x794 0x4 0x1
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS			0x13c 0x484 0x754 0x5 0x1
-#define MX53_PAD_EIM_D24__ECSPI2_SS2				0x13c 0x484 0x000 0x6 0x0
-#define MX53_PAD_EIM_D24__UART1_DTR				0x13c 0x484 0x000 0x7 0x0
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25				0x140 0x488 0x000 0x0 0x0
-#define MX53_PAD_EIM_D25__GPIO3_25				0x140 0x488 0x000 0x1 0x0
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX				0x140 0x488 0x888 0x2 0x1
-#define MX53_PAD_EIM_D25__ECSPI1_SS3				0x140 0x488 0x7b4 0x3 0x1
-#define MX53_PAD_EIM_D25__CSPI_SS3				0x140 0x488 0x798 0x4 0x1
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC			0x140 0x488 0x750 0x5 0x1
-#define MX53_PAD_EIM_D25__ECSPI2_SS3				0x140 0x488 0x000 0x6 0x0
-#define MX53_PAD_EIM_D25__UART1_DSR				0x140 0x488 0x000 0x7 0x0
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26				0x144 0x48c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D26__GPIO3_26				0x144 0x48c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX				0x144 0x48c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D26__FIRI_RXD				0x144 0x48c 0x80c 0x3 0x0
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1				0x144 0x48c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11				0x144 0x48c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D26__IPU_SISG_2				0x144 0x48c 0x000 0x6 0x0
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22			0x144 0x48c 0x000 0x7 0x0
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27				0x148 0x490 0x000 0x0 0x0
-#define MX53_PAD_EIM_D27__GPIO3_27				0x148 0x490 0x000 0x1 0x0
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX				0x148 0x490 0x880 0x2 0x1
-#define MX53_PAD_EIM_D27__FIRI_TXD				0x148 0x490 0x000 0x3 0x0
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0				0x148 0x490 0x000 0x4 0x0
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13				0x148 0x490 0x000 0x5 0x0
-#define MX53_PAD_EIM_D27__IPU_SISG_3				0x148 0x490 0x000 0x6 0x0
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23			0x148 0x490 0x000 0x7 0x0
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28				0x14c 0x494 0x000 0x0 0x0
-#define MX53_PAD_EIM_D28__GPIO3_28				0x14c 0x494 0x000 0x1 0x0
-#define MX53_PAD_EIM_D28__UART2_CTS				0x14c 0x494 0x000 0x2 0x0
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO			0x14c 0x494 0x82c 0x3 0x1
-#define MX53_PAD_EIM_D28__CSPI_MOSI				0x14c 0x494 0x788 0x4 0x1
-#define MX53_PAD_EIM_D28__I2C1_SDA				0x14c 0x494 0x818 0x5 0x1
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG				0x14c 0x494 0x000 0x6 0x0
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13				0x14c 0x494 0x000 0x7 0x0
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29				0x150 0x498 0x000 0x0 0x0
-#define MX53_PAD_EIM_D29__GPIO3_29				0x150 0x498 0x000 0x1 0x0
-#define MX53_PAD_EIM_D29__UART2_RTS				0x150 0x498 0x87c 0x2 0x1
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS			0x150 0x498 0x000 0x3 0x0
-#define MX53_PAD_EIM_D29__CSPI_SS0				0x150 0x498 0x78c 0x4 0x2
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15				0x150 0x498 0x000 0x5 0x0
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC			0x150 0x498 0x83c 0x6 0x0
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14				0x150 0x498 0x000 0x7 0x0
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30				0x154 0x49c 0x000 0x0 0x0
-#define MX53_PAD_EIM_D30__GPIO3_30				0x154 0x49c 0x000 0x1 0x0
-#define MX53_PAD_EIM_D30__UART3_CTS				0x154 0x49c 0x000 0x2 0x0
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3				0x154 0x49c 0x000 0x3 0x0
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11				0x154 0x49c 0x000 0x4 0x0
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21			0x154 0x49c 0x000 0x5 0x0
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC			0x154 0x49c 0x8a0 0x6 0x0
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC			0x154 0x49c 0x8a4 0x7 0x1
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31				0x158 0x4a0 0x000 0x0 0x0
-#define MX53_PAD_EIM_D31__GPIO3_31				0x158 0x4a0 0x000 0x1 0x0
-#define MX53_PAD_EIM_D31__UART3_RTS				0x158 0x4a0 0x884 0x2 0x3
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2				0x158 0x4a0 0x000 0x3 0x0
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12				0x158 0x4a0 0x000 0x4 0x0
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20			0x158 0x4a0 0x000 0x5 0x0
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR			0x158 0x4a0 0x000 0x6 0x0
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR			0x158 0x4a0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24				0x15c 0x4a8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A24__GPIO5_4				0x15c 0x4a8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19			0x15c 0x4a8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19				0x15c 0x4a8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A24__IPU_SISG_2				0x15c 0x4a8 0x000 0x6 0x0
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID			0x15c 0x4a8 0x000 0x7 0x0
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23				0x160 0x4ac 0x000 0x0 0x0
-#define MX53_PAD_EIM_A23__GPIO6_6				0x160 0x4ac 0x000 0x1 0x0
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18			0x160 0x4ac 0x000 0x2 0x0
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18				0x160 0x4ac 0x000 0x3 0x0
-#define MX53_PAD_EIM_A23__IPU_SISG_3				0x160 0x4ac 0x000 0x6 0x0
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION			0x160 0x4ac 0x000 0x7 0x0
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22				0x164 0x4b0 0x000 0x0 0x0
-#define MX53_PAD_EIM_A22__GPIO2_16				0x164 0x4b0 0x000 0x1 0x0
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17			0x164 0x4b0 0x000 0x2 0x0
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17				0x164 0x4b0 0x000 0x3 0x0
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7				0x164 0x4b0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21				0x168 0x4b4 0x000 0x0 0x0
-#define MX53_PAD_EIM_A21__GPIO2_17				0x168 0x4b4 0x000 0x1 0x0
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16			0x168 0x4b4 0x000 0x2 0x0
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16				0x168 0x4b4 0x000 0x3 0x0
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6				0x168 0x4b4 0x000 0x7 0x0
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20				0x16c 0x4b8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A20__GPIO2_18				0x16c 0x4b8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15			0x16c 0x4b8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15				0x16c 0x4b8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5				0x16c 0x4b8 0x000 0x7 0x0
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19				0x170 0x4bc 0x000 0x0 0x0
-#define MX53_PAD_EIM_A19__GPIO2_19				0x170 0x4bc 0x000 0x1 0x0
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14			0x170 0x4bc 0x000 0x2 0x0
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14				0x170 0x4bc 0x000 0x3 0x0
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4				0x170 0x4bc 0x000 0x7 0x0
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18				0x174 0x4c0 0x000 0x0 0x0
-#define MX53_PAD_EIM_A18__GPIO2_20				0x174 0x4c0 0x000 0x1 0x0
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13			0x174 0x4c0 0x000 0x2 0x0
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13				0x174 0x4c0 0x000 0x3 0x0
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3				0x174 0x4c0 0x000 0x7 0x0
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17				0x178 0x4c4 0x000 0x0 0x0
-#define MX53_PAD_EIM_A17__GPIO2_21				0x178 0x4c4 0x000 0x1 0x0
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12			0x178 0x4c4 0x000 0x2 0x0
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12				0x178 0x4c4 0x000 0x3 0x0
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2				0x178 0x4c4 0x000 0x7 0x0
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16				0x17c 0x4c8 0x000 0x0 0x0
-#define MX53_PAD_EIM_A16__GPIO2_22				0x17c 0x4c8 0x000 0x1 0x0
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK			0x17c 0x4c8 0x000 0x2 0x0
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK			0x17c 0x4c8 0x000 0x3 0x0
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1				0x17c 0x4c8 0x000 0x7 0x0
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0				0x180 0x4cc 0x000 0x0 0x0
-#define MX53_PAD_EIM_CS0__GPIO2_23				0x180 0x4cc 0x000 0x1 0x0
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK				0x180 0x4cc 0x7b8 0x2 0x2
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5				0x180 0x4cc 0x000 0x3 0x0
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1				0x184 0x4d0 0x000 0x0 0x0
-#define MX53_PAD_EIM_CS1__GPIO2_24				0x184 0x4d0 0x000 0x1 0x0
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI				0x184 0x4d0 0x7c0 0x2 0x2
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6				0x184 0x4d0 0x000 0x3 0x0
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE				0x188 0x4d4 0x000 0x0 0x0
-#define MX53_PAD_EIM_OE__GPIO2_25				0x188 0x4d4 0x000 0x1 0x0
-#define MX53_PAD_EIM_OE__ECSPI2_MISO				0x188 0x4d4 0x7bc 0x2 0x2
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7				0x188 0x4d4 0x000 0x3 0x0
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG				0x188 0x4d4 0x000 0x7 0x0
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW				0x18c 0x4d8 0x000 0x0 0x0
-#define MX53_PAD_EIM_RW__GPIO2_26				0x18c 0x4d8 0x000 0x1 0x0
-#define MX53_PAD_EIM_RW__ECSPI2_SS0				0x18c 0x4d8 0x7c4 0x2 0x2
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8				0x18c 0x4d8 0x000 0x3 0x0
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT			0x18c 0x4d8 0x000 0x7 0x0
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA				0x190 0x4dc 0x000 0x0 0x0
-#define MX53_PAD_EIM_LBA__GPIO2_27				0x190 0x4dc 0x000 0x1 0x0
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1				0x190 0x4dc 0x7c8 0x2 0x1
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17				0x190 0x4dc 0x000 0x3 0x0
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0				0x190 0x4dc 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0				0x194 0x4e4 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB0__GPIO2_28				0x194 0x4e4 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11			0x194 0x4e4 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11				0x194 0x4e4 0x000 0x4 0x0
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY				0x194 0x4e4 0x810 0x5 0x0
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7				0x194 0x4e4 0x000 0x7 0x0
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1				0x198 0x4e8 0x000 0x0 0x0
-#define MX53_PAD_EIM_EB1__GPIO2_29				0x198 0x4e8 0x000 0x1 0x0
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10			0x198 0x4e8 0x000 0x3 0x0
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10				0x198 0x4e8 0x000 0x4 0x0
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6				0x198 0x4e8 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0			0x19c 0x4ec 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA0__GPIO3_0				0x19c 0x4ec 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9			0x19c 0x4ec 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9				0x19c 0x4ec 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5				0x19c 0x4ec 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1			0x1a0 0x4f0 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA1__GPIO3_1				0x1a0 0x4f0 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8			0x1a0 0x4f0 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8				0x1a0 0x4f0 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4				0x1a0 0x4f0 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2			0x1a4 0x4f4 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA2__GPIO3_2				0x1a4 0x4f4 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7			0x1a4 0x4f4 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7				0x1a4 0x4f4 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3				0x1a4 0x4f4 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3			0x1a8 0x4f8 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA3__GPIO3_3				0x1a8 0x4f8 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6			0x1a8 0x4f8 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6				0x1a8 0x4f8 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2				0x1a8 0x4f8 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4			0x1ac 0x4fc 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA4__GPIO3_4				0x1ac 0x4fc 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5			0x1ac 0x4fc 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5				0x1ac 0x4fc 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7				0x1ac 0x4fc 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5			0x1b0 0x500 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA5__GPIO3_5				0x1b0 0x500 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4			0x1b0 0x500 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4				0x1b0 0x500 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6				0x1b0 0x500 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6			0x1b4 0x504 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA6__GPIO3_6				0x1b4 0x504 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3			0x1b4 0x504 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3				0x1b4 0x504 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5				0x1b4 0x504 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7			0x1b8 0x508 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA7__GPIO3_7				0x1b8 0x508 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2			0x1b8 0x508 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2				0x1b8 0x508 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4				0x1b8 0x508 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8			0x1bc 0x50c 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA8__GPIO3_8				0x1bc 0x50c 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1			0x1bc 0x50c 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1				0x1bc 0x50c 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3				0x1bc 0x50c 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9			0x1c0 0x510 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA9__GPIO3_9				0x1c0 0x510 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0			0x1c0 0x510 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0				0x1c0 0x510 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2				0x1c0 0x510 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10			0x1c4 0x514 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA10__GPIO3_10				0x1c4 0x514 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15			0x1c4 0x514 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN			0x1c4 0x514 0x834 0x4 0x1
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1			0x1c4 0x514 0x000 0x7 0x0
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11			0x1c8 0x518 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA11__GPIO3_11				0x1c8 0x518 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2				0x1c8 0x518 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC			0x1c8 0x518 0x838 0x4 0x1
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12			0x1cc 0x51c 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA12__GPIO3_12				0x1cc 0x51c 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3				0x1cc 0x51c 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC			0x1cc 0x51c 0x83c 0x4 0x1
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13			0x1d0 0x520 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA13__GPIO3_13				0x1d0 0x520 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS			0x1d0 0x520 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK			0x1d0 0x520 0x76c 0x4 0x1
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14			0x1d4 0x524 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA14__GPIO3_14				0x1d4 0x524 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS			0x1d4 0x524 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK			0x1d4 0x524 0x000 0x4 0x0
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15			0x1d8 0x528 0x000 0x0 0x0
-#define MX53_PAD_EIM_DA15__GPIO3_15				0x1d8 0x528 0x000 0x1 0x0
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1				0x1d8 0x528 0x000 0x3 0x0
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4				0x1d8 0x528 0x000 0x4 0x0
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B			0x1dc 0x52c 0x000 0x0 0x0
-#define MX53_PAD_NANDF_WE_B__GPIO6_12				0x1dc 0x52c 0x000 0x1 0x0
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B			0x1e0 0x530 0x000 0x0 0x0
-#define MX53_PAD_NANDF_RE_B__GPIO6_13				0x1e0 0x530 0x000 0x1 0x0
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT			0x1e4 0x534 0x000 0x0 0x0
-#define MX53_PAD_EIM_WAIT__GPIO5_0				0x1e4 0x534 0x000 0x1 0x0
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B			0x1e4 0x534 0x000 0x2 0x0
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22				0x1ec 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3			0x1ec 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24				0x1f0 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2			0x1f0 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26				0x1f4 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK			0x1f4 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28				0x1f8 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1			0x1f8 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30				0x1fc 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0			0x1fc 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22				0x200 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3			0x200 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24				0x204 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK			0x204 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26				0x208 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2			0x208 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28				0x20c 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1			0x20c 0x000 0x000 0x1 0x0
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30				0x210 0x000 0x000 0x0 0x0
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0			0x210 0x000 0x000 0x1 0x0
-#define MX53_PAD_GPIO_10__GPIO4_0				0x214 0x540 0x000 0x0 0x0
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT			0x214 0x540 0x000 0x1 0x0
-#define MX53_PAD_GPIO_11__GPIO4_1				0x218 0x544 0x000 0x0 0x0
-#define MX53_PAD_GPIO_12__GPIO4_2				0x21c 0x548 0x000 0x0 0x0
-#define MX53_PAD_GPIO_13__GPIO4_3				0x220 0x54c 0x000 0x0 0x0
-#define MX53_PAD_GPIO_14__GPIO4_4				0x224 0x550 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE			0x228 0x5a0 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CLE__GPIO6_7				0x228 0x5a0 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0			0x228 0x5a0 0x000 0x7 0x0
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE			0x22c 0x5a4 0x000 0x0 0x0
-#define MX53_PAD_NANDF_ALE__GPIO6_8				0x22c 0x5a4 0x000 0x1 0x0
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1			0x22c 0x5a4 0x000 0x7 0x0
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B			0x230 0x5a8 0x000 0x0 0x0
-#define MX53_PAD_NANDF_WP_B__GPIO6_9				0x230 0x5a8 0x000 0x1 0x0
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2			0x230 0x5a8 0x000 0x7 0x0
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0			0x234 0x5ac 0x000 0x0 0x0
-#define MX53_PAD_NANDF_RB0__GPIO6_10				0x234 0x5ac 0x000 0x1 0x0
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3			0x234 0x5ac 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0			0x238 0x5b0 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS0__GPIO6_11				0x238 0x5b0 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4			0x238 0x5b0 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1			0x23c 0x5b4 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS1__GPIO6_14				0x23c 0x5b4 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK				0x23c 0x5b4 0x858 0x6 0x0
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5			0x23c 0x5b4 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2			0x240 0x5b8 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS2__GPIO6_15				0x240 0x5b8 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0				0x240 0x5b8 0x000 0x2 0x0
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0				0x240 0x5b8 0x7e4 0x3 0x0
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE			0x240 0x5b8 0x000 0x4 0x0
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK			0x240 0x5b8 0x000 0x5 0x0
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG				0x240 0x5b8 0x860 0x6 0x0
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6			0x240 0x5b8 0x000 0x7 0x0
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3			0x244 0x5bc 0x000 0x0 0x0
-#define MX53_PAD_NANDF_CS3__GPIO6_16				0x244 0x5bc 0x000 0x1 0x0
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1				0x244 0x5bc 0x000 0x2 0x0
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1				0x244 0x5bc 0x7e8 0x3 0x0
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26			0x244 0x5bc 0x000 0x4 0x0
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT				0x244 0x5bc 0x85c 0x6 0x0
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7			0x244 0x5bc 0x000 0x7 0x0
-#define MX53_PAD_FEC_MDIO__FEC_MDIO				0x248 0x5c4 0x804 0x0 0x1
-#define MX53_PAD_FEC_MDIO__GPIO1_22				0x248 0x5c4 0x000 0x1 0x0
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR				0x248 0x5c4 0x7dc 0x2 0x0
-#define MX53_PAD_FEC_MDIO__FEC_COL				0x248 0x5c4 0x800 0x3 0x1
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2			0x248 0x5c4 0x000 0x4 0x0
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3		0x248 0x5c4 0x000 0x5 0x0
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49			0x248 0x5c4 0x000 0x6 0x0
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK			0x24c 0x5c8 0x000 0x0 0x0
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23				0x24c 0x5c8 0x000 0x1 0x0
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR				0x24c 0x5c8 0x7cc 0x2 0x0
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4		0x24c 0x5c8 0x000 0x5 0x0
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50			0x24c 0x5c8 0x000 0x6 0x0
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER				0x250 0x5cc 0x000 0x0 0x0
-#define MX53_PAD_FEC_RX_ER__GPIO1_24				0x250 0x5cc 0x000 0x1 0x0
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR				0x250 0x5cc 0x7d4 0x2 0x0
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK				0x250 0x5cc 0x808 0x3 0x1
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3			0x250 0x5cc 0x000 0x4 0x0
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV				0x254 0x5d0 0x000 0x0 0x0
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25				0x254 0x5d0 0x000 0x1 0x0
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT				0x254 0x5d0 0x7e0 0x2 0x0
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1				0x258 0x5d4 0x000 0x0 0x0
-#define MX53_PAD_FEC_RXD1__GPIO1_26				0x258 0x5d4 0x000 0x1 0x0
-#define MX53_PAD_FEC_RXD1__ESAI1_FST				0x258 0x5d4 0x7d0 0x2 0x0
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG				0x258 0x5d4 0x860 0x3 0x1
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1			0x258 0x5d4 0x000 0x4 0x0
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0				0x25c 0x5d8 0x000 0x0 0x0
-#define MX53_PAD_FEC_RXD0__GPIO1_27				0x25c 0x5d8 0x000 0x1 0x0
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT				0x25c 0x5d8 0x7d8 0x2 0x0
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT			0x25c 0x5d8 0x000 0x3 0x0
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN				0x260 0x5dc 0x000 0x0 0x0
-#define MX53_PAD_FEC_TX_EN__GPIO1_28				0x260 0x5dc 0x000 0x1 0x0
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2			0x260 0x5dc 0x7f0 0x2 0x0
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1				0x264 0x5e0 0x000 0x0 0x0
-#define MX53_PAD_FEC_TXD1__GPIO1_29				0x264 0x5e0 0x000 0x1 0x0
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3			0x264 0x5e0 0x7ec 0x2 0x0
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK				0x264 0x5e0 0x858 0x3 0x1
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK			0x264 0x5e0 0x000 0x4 0x0
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0				0x268 0x5e4 0x000 0x0 0x0
-#define MX53_PAD_FEC_TXD0__GPIO1_30				0x268 0x5e4 0x000 0x1 0x0
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1			0x268 0x5e4 0x7f4 0x2 0x0
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0			0x268 0x5e4 0x000 0x7 0x0
-#define MX53_PAD_FEC_MDC__FEC_MDC				0x26c 0x5e8 0x000 0x0 0x0
-#define MX53_PAD_FEC_MDC__GPIO1_31				0x26c 0x5e8 0x000 0x1 0x0
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0				0x26c 0x5e8 0x7f8 0x2 0x0
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT				0x26c 0x5e8 0x85c 0x3 0x1
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG		0x26c 0x5e8 0x000 0x4 0x0
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1			0x26c 0x5e8 0x000 0x7 0x0
-#define MX53_PAD_PATA_DIOW__PATA_DIOW				0x270 0x5f0 0x000 0x0 0x0
-#define MX53_PAD_PATA_DIOW__GPIO6_17				0x270 0x5f0 0x000 0x1 0x0
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX			0x270 0x5f0 0x000 0x3 0x0
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2			0x270 0x5f0 0x000 0x7 0x0
-#define MX53_PAD_PATA_DMACK__PATA_DMACK				0x274 0x5f4 0x000 0x0 0x0
-#define MX53_PAD_PATA_DMACK__GPIO6_18				0x274 0x5f4 0x000 0x1 0x0
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX			0x274 0x5f4 0x878 0x3 0x3
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3			0x274 0x5f4 0x000 0x7 0x0
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ				0x278 0x5f8 0x000 0x0 0x0
-#define MX53_PAD_PATA_DMARQ__GPIO7_0				0x278 0x5f8 0x000 0x1 0x0
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX			0x278 0x5f8 0x000 0x3 0x0
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0			0x278 0x5f8 0x000 0x5 0x0
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4			0x278 0x5f8 0x000 0x7 0x0
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN			0x27c 0x5fc 0x000 0x0 0x0
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1			0x27c 0x5fc 0x000 0x1 0x0
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX			0x27c 0x5fc 0x880 0x3 0x3
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1			0x27c 0x5fc 0x000 0x5 0x0
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5		0x27c 0x5fc 0x000 0x7 0x0
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ				0x280 0x600 0x000 0x0 0x0
-#define MX53_PAD_PATA_INTRQ__GPIO7_2				0x280 0x600 0x000 0x1 0x0
-#define MX53_PAD_PATA_INTRQ__UART2_CTS				0x280 0x600 0x000 0x3 0x0
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN				0x280 0x600 0x000 0x4 0x0
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2			0x280 0x600 0x000 0x5 0x0
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6			0x280 0x600 0x000 0x7 0x0
-#define MX53_PAD_PATA_DIOR__PATA_DIOR				0x284 0x604 0x000 0x0 0x0
-#define MX53_PAD_PATA_DIOR__GPIO7_3				0x284 0x604 0x000 0x1 0x0
-#define MX53_PAD_PATA_DIOR__UART2_RTS				0x284 0x604 0x87c 0x3 0x3
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN				0x284 0x604 0x760 0x4 0x1
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7			0x284 0x604 0x000 0x7 0x0
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B		0x288 0x608 0x000 0x0 0x0
-#define MX53_PAD_PATA_RESET_B__GPIO7_4				0x288 0x608 0x000 0x1 0x0
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD			0x288 0x608 0x000 0x2 0x0
-#define MX53_PAD_PATA_RESET_B__UART1_CTS			0x288 0x608 0x000 0x3 0x0
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN			0x288 0x608 0x000 0x4 0x0
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0		0x288 0x608 0x000 0x7 0x0
-#define MX53_PAD_PATA_IORDY__PATA_IORDY				0x28c 0x60c 0x000 0x0 0x0
-#define MX53_PAD_PATA_IORDY__GPIO7_5				0x28c 0x60c 0x000 0x1 0x0
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK				0x28c 0x60c 0x000 0x2 0x0
-#define MX53_PAD_PATA_IORDY__UART1_RTS				0x28c 0x60c 0x874 0x3 0x3
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN				0x28c 0x60c 0x764 0x4 0x1
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1			0x28c 0x60c 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_0__PATA_DA_0				0x290 0x610 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_0__GPIO7_6				0x290 0x610 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST				0x290 0x610 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE				0x290 0x610 0x864 0x4 0x0
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2			0x290 0x610 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_1__PATA_DA_1				0x294 0x614 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_1__GPIO7_7				0x294 0x614 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD				0x294 0x614 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_1__UART3_CTS				0x294 0x614 0x000 0x4 0x0
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3			0x294 0x614 0x000 0x7 0x0
-#define MX53_PAD_PATA_DA_2__PATA_DA_2				0x298 0x618 0x000 0x0 0x0
-#define MX53_PAD_PATA_DA_2__GPIO7_8				0x298 0x618 0x000 0x1 0x0
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK				0x298 0x618 0x000 0x2 0x0
-#define MX53_PAD_PATA_DA_2__UART3_RTS				0x298 0x618 0x884 0x4 0x5
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4			0x298 0x618 0x000 0x7 0x0
-#define MX53_PAD_PATA_CS_0__PATA_CS_0				0x29c 0x61c 0x000 0x0 0x0
-#define MX53_PAD_PATA_CS_0__GPIO7_9				0x29c 0x61c 0x000 0x1 0x0
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX			0x29c 0x61c 0x000 0x4 0x0
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5			0x29c 0x61c 0x000 0x7 0x0
-#define MX53_PAD_PATA_CS_1__PATA_CS_1				0x2a0 0x620 0x000 0x0 0x0
-#define MX53_PAD_PATA_CS_1__GPIO7_10				0x2a0 0x620 0x000 0x1 0x0
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX			0x2a0 0x620 0x888 0x4 0x3
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6			0x2a0 0x620 0x000 0x7 0x0
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0			0x2a4 0x628 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA0__GPIO2_0				0x2a4 0x628 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0			0x2a4 0x628 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4			0x2a4 0x628 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0		0x2a4 0x628 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0			0x2a4 0x628 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7			0x2a4 0x628 0x000 0x7 0x0
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1			0x2a8 0x62c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA1__GPIO2_1				0x2a8 0x62c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1			0x2a8 0x62c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5			0x2a8 0x62c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1		0x2a8 0x62c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1			0x2a8 0x62c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2			0x2ac 0x630 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA2__GPIO2_2				0x2ac 0x630 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2			0x2ac 0x630 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6			0x2ac 0x630 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2		0x2ac 0x630 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2			0x2ac 0x630 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3			0x2b0 0x634 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA3__GPIO2_3				0x2b0 0x634 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3			0x2b0 0x634 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7			0x2b0 0x634 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3		0x2b0 0x634 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3			0x2b0 0x634 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4			0x2b4 0x638 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA4__GPIO2_4				0x2b4 0x638 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4			0x2b4 0x638 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4			0x2b4 0x638 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4		0x2b4 0x638 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4			0x2b4 0x638 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5			0x2b8 0x63c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA5__GPIO2_5				0x2b8 0x63c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5			0x2b8 0x63c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5			0x2b8 0x63c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5		0x2b8 0x63c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5			0x2b8 0x63c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6			0x2bc 0x640 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA6__GPIO2_6				0x2bc 0x640 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6			0x2bc 0x640 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6			0x2bc 0x640 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6		0x2bc 0x640 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6			0x2bc 0x640 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7			0x2c0 0x644 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA7__GPIO2_7				0x2c0 0x644 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7			0x2c0 0x644 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7			0x2c0 0x644 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7		0x2c0 0x644 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7			0x2c0 0x644 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8			0x2c4 0x648 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA8__GPIO2_8				0x2c4 0x648 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4			0x2c4 0x648 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8			0x2c4 0x648 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0			0x2c4 0x648 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8		0x2c4 0x648 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8			0x2c4 0x648 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9			0x2c8 0x64c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA9__GPIO2_9				0x2c8 0x64c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5			0x2c8 0x64c 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9			0x2c8 0x64c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1			0x2c8 0x64c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9		0x2c8 0x64c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9			0x2c8 0x64c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10			0x2cc 0x650 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA10__GPIO2_10				0x2cc 0x650 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6			0x2cc 0x650 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10			0x2cc 0x650 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2			0x2cc 0x650 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10		0x2cc 0x650 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10			0x2cc 0x650 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11			0x2d0 0x654 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA11__GPIO2_11				0x2d0 0x654 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7			0x2d0 0x654 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11			0x2d0 0x654 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3			0x2d0 0x654 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11		0x2d0 0x654 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11			0x2d0 0x654 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12			0x2d4 0x658 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA12__GPIO2_12				0x2d4 0x658 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4			0x2d4 0x658 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12			0x2d4 0x658 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0			0x2d4 0x658 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12		0x2d4 0x658 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12			0x2d4 0x658 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13			0x2d8 0x65c 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA13__GPIO2_13				0x2d8 0x65c 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5			0x2d8 0x65c 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13			0x2d8 0x65c 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1			0x2d8 0x65c 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13		0x2d8 0x65c 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13			0x2d8 0x65c 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14			0x2dc 0x660 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA14__GPIO2_14				0x2dc 0x660 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6			0x2dc 0x660 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14			0x2dc 0x660 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2			0x2dc 0x660 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14		0x2dc 0x660 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14			0x2dc 0x660 0x000 0x6 0x0
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15			0x2e0 0x664 0x000 0x0 0x0
-#define MX53_PAD_PATA_DATA15__GPIO2_15				0x2e0 0x664 0x000 0x1 0x0
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7			0x2e0 0x664 0x000 0x2 0x0
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15			0x2e0 0x664 0x000 0x3 0x0
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3			0x2e0 0x664 0x000 0x4 0x0
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15		0x2e0 0x664 0x000 0x5 0x0
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15			0x2e0 0x664 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0				0x2e4 0x66c 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA0__GPIO1_16				0x2e4 0x66c 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1				0x2e4 0x66c 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA0__CSPI_MISO				0x2e4 0x66c 0x784 0x5 0x2
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP			0x2e4 0x66c 0x778 0x7 0x0
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1				0x2e8 0x670 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA1__GPIO1_17				0x2e8 0x670 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2				0x2e8 0x670 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA1__CSPI_SS0				0x2e8 0x670 0x78c 0x5 0x3
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP			0x2e8 0x670 0x77c 0x7 0x1
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD				0x2ec 0x674 0x000 0x0 0x0
-#define MX53_PAD_SD1_CMD__GPIO1_18				0x2ec 0x674 0x000 0x1 0x0
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1				0x2ec 0x674 0x000 0x3 0x0
-#define MX53_PAD_SD1_CMD__CSPI_MOSI				0x2ec 0x674 0x788 0x5 0x2
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP				0x2ec 0x674 0x770 0x7 0x0
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2				0x2f0 0x678 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA2__GPIO1_19				0x2f0 0x678 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2				0x2f0 0x678 0x000 0x2 0x0
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO				0x2f0 0x678 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B			0x2f0 0x678 0x000 0x4 0x0
-#define MX53_PAD_SD1_DATA2__CSPI_SS1				0x2f0 0x678 0x790 0x5 0x2
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB		0x2f0 0x678 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP			0x2f0 0x678 0x774 0x7 0x0
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK				0x2f4 0x67c 0x000 0x0 0x0
-#define MX53_PAD_SD1_CLK__GPIO1_20				0x2f4 0x67c 0x000 0x1 0x0
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT			0x2f4 0x67c 0x000 0x2 0x0
-#define MX53_PAD_SD1_CLK__GPT_CLKIN				0x2f4 0x67c 0x000 0x3 0x0
-#define MX53_PAD_SD1_CLK__CSPI_SCLK				0x2f4 0x67c 0x780 0x5 0x2
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0			0x2f4 0x67c 0x000 0x7 0x0
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3				0x2f8 0x680 0x000 0x0 0x0
-#define MX53_PAD_SD1_DATA3__GPIO1_21				0x2f8 0x680 0x000 0x1 0x0
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3				0x2f8 0x680 0x000 0x2 0x0
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO				0x2f8 0x680 0x000 0x3 0x0
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B			0x2f8 0x680 0x000 0x4 0x0
-#define MX53_PAD_SD1_DATA3__CSPI_SS2				0x2f8 0x680 0x794 0x5 0x2
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB		0x2f8 0x680 0x000 0x6 0x0
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1			0x2f8 0x680 0x000 0x7 0x0
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK				0x2fc 0x688 0x000 0x0 0x0
-#define MX53_PAD_SD2_CLK__GPIO1_10				0x2fc 0x688 0x000 0x1 0x0
-#define MX53_PAD_SD2_CLK__KPP_COL_5				0x2fc 0x688 0x840 0x2 0x2
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS			0x2fc 0x688 0x73c 0x3 0x1
-#define MX53_PAD_SD2_CLK__CSPI_SCLK				0x2fc 0x688 0x780 0x5 0x3
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V				0x2fc 0x688 0x000 0x7 0x0
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD				0x300 0x68c 0x000 0x0 0x0
-#define MX53_PAD_SD2_CMD__GPIO1_11				0x300 0x68c 0x000 0x1 0x0
-#define MX53_PAD_SD2_CMD__KPP_ROW_5				0x300 0x68c 0x84c 0x2 0x1
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC			0x300 0x68c 0x738 0x3 0x1
-#define MX53_PAD_SD2_CMD__CSPI_MOSI				0x300 0x68c 0x788 0x5 0x3
-#define MX53_PAD_SD2_CMD__SCC_RANDOM				0x300 0x68c 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3				0x304 0x690 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA3__GPIO1_12				0x304 0x690 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA3__KPP_COL_6				0x304 0x690 0x844 0x2 0x1
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC			0x304 0x690 0x740 0x3 0x1
-#define MX53_PAD_SD2_DATA3__CSPI_SS2				0x304 0x690 0x794 0x5 0x3
-#define MX53_PAD_SD2_DATA3__SJC_DONE				0x304 0x690 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2				0x308 0x694 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA2__GPIO1_13				0x308 0x694 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6				0x308 0x694 0x850 0x2 0x1
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD			0x308 0x694 0x734 0x3 0x1
-#define MX53_PAD_SD2_DATA2__CSPI_SS1				0x308 0x694 0x790 0x5 0x3
-#define MX53_PAD_SD2_DATA2__SJC_FAIL				0x308 0x694 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1				0x30c 0x698 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA1__GPIO1_14				0x30c 0x698 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA1__KPP_COL_7				0x30c 0x698 0x848 0x2 0x1
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS			0x30c 0x698 0x744 0x3 0x1
-#define MX53_PAD_SD2_DATA1__CSPI_SS0				0x30c 0x698 0x78c 0x5 0x4
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO			0x30c 0x698 0x000 0x7 0x0
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0				0x310 0x69c 0x000 0x0 0x0
-#define MX53_PAD_SD2_DATA0__GPIO1_15				0x310 0x69c 0x000 0x1 0x0
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7				0x310 0x69c 0x854 0x2 0x1
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD			0x310 0x69c 0x730 0x3 0x1
-#define MX53_PAD_SD2_DATA0__CSPI_MISO				0x310 0x69c 0x784 0x5 0x3
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT			0x310 0x69c 0x000 0x7 0x0
-#define MX53_PAD_GPIO_0__CCM_CLKO				0x314 0x6a4 0x000 0x0 0x0
-#define MX53_PAD_GPIO_0__GPIO1_0				0x314 0x6a4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_0__KPP_COL_5				0x314 0x6a4 0x840 0x2 0x3
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK			0x314 0x6a4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_0__EPIT1_EPITO				0x314 0x6a4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB				0x314 0x6a4 0x000 0x5 0x0
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR			0x314 0x6a4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_0__CSU_TD					0x314 0x6a4 0x000 0x7 0x0
-#define MX53_PAD_GPIO_1__ESAI1_SCKR				0x318 0x6a8 0x7dc 0x0 0x1
-#define MX53_PAD_GPIO_1__GPIO1_1				0x318 0x6a8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_1__KPP_ROW_5				0x318 0x6a8 0x84c 0x2 0x2
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK			0x318 0x6a8 0x000 0x3 0x0
-#define MX53_PAD_GPIO_1__PWM2_PWMO				0x318 0x6a8 0x000 0x4 0x0
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B				0x318 0x6a8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_1__ESDHC1_CD				0x318 0x6a8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK				0x318 0x6a8 0x000 0x7 0x0
-#define MX53_PAD_GPIO_9__ESAI1_FSR				0x31c 0x6ac 0x7cc 0x0 0x1
-#define MX53_PAD_GPIO_9__GPIO1_9				0x31c 0x6ac 0x000 0x1 0x0
-#define MX53_PAD_GPIO_9__KPP_COL_6				0x31c 0x6ac 0x844 0x2 0x2
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B				0x31c 0x6ac 0x000 0x3 0x0
-#define MX53_PAD_GPIO_9__PWM1_PWMO				0x31c 0x6ac 0x000 0x4 0x0
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B				0x31c 0x6ac 0x000 0x5 0x0
-#define MX53_PAD_GPIO_9__ESDHC1_WP				0x31c 0x6ac 0x7fc 0x6 0x1
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE				0x31c 0x6ac 0x000 0x7 0x0
-#define MX53_PAD_GPIO_3__ESAI1_HCKR				0x320 0x6b0 0x7d4 0x0 0x1
-#define MX53_PAD_GPIO_3__GPIO1_3				0x320 0x6b0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_3__I2C3_SCL				0x320 0x6b0 0x824 0x2 0x1
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN				0x320 0x6b0 0x000 0x3 0x0
-#define MX53_PAD_GPIO_3__CCM_CLKO2				0x320 0x6b0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0		0x320 0x6b0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC			0x320 0x6b0 0x8a0 0x6 0x1
-#define MX53_PAD_GPIO_3__MLB_MLBCLK				0x320 0x6b0 0x858 0x7 0x2
-#define MX53_PAD_GPIO_6__ESAI1_SCKT				0x324 0x6b4 0x7e0 0x0 0x1
-#define MX53_PAD_GPIO_6__GPIO1_6				0x324 0x6b4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_6__I2C3_SDA				0x324 0x6b4 0x828 0x2 0x1
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0				0x324 0x6b4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB			0x324 0x6b4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1		0x324 0x6b4 0x000 0x5 0x0
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL				0x324 0x6b4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_6__MLB_MLBSIG				0x324 0x6b4 0x860 0x7 0x2
-#define MX53_PAD_GPIO_2__ESAI1_FST				0x328 0x6b8 0x7d0 0x0 0x1
-#define MX53_PAD_GPIO_2__GPIO1_2				0x328 0x6b8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_2__KPP_ROW_6				0x328 0x6b8 0x850 0x2 0x2
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1				0x328 0x6b8 0x000 0x3 0x0
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0			0x328 0x6b8 0x000 0x4 0x0
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2		0x328 0x6b8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_2__ESDHC2_WP				0x328 0x6b8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_2__MLB_MLBDAT				0x328 0x6b8 0x85c 0x7 0x2
-#define MX53_PAD_GPIO_4__ESAI1_HCKT				0x32c 0x6bc 0x7d8 0x0 0x1
-#define MX53_PAD_GPIO_4__GPIO1_4				0x32c 0x6bc 0x000 0x1 0x0
-#define MX53_PAD_GPIO_4__KPP_COL_7				0x32c 0x6bc 0x848 0x2 0x2
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2				0x32c 0x6bc 0x000 0x3 0x0
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1			0x32c 0x6bc 0x000 0x4 0x0
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3		0x32c 0x6bc 0x000 0x5 0x0
-#define MX53_PAD_GPIO_4__ESDHC2_CD				0x32c 0x6bc 0x000 0x6 0x0
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE				0x32c 0x6bc 0x000 0x7 0x0
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3				0x330 0x6c0 0x7ec 0x0 0x1
-#define MX53_PAD_GPIO_5__GPIO1_5				0x330 0x6c0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_5__KPP_ROW_7				0x330 0x6c0 0x854 0x2 0x2
-#define MX53_PAD_GPIO_5__CCM_CLKO				0x330 0x6c0 0x000 0x3 0x0
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2			0x330 0x6c0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4		0x330 0x6c0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_5__I2C3_SCL				0x330 0x6c0 0x824 0x6 0x2
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP				0x330 0x6c0 0x770 0x7 0x1
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1				0x334 0x6c4 0x7f4 0x0 0x1
-#define MX53_PAD_GPIO_7__GPIO1_7				0x334 0x6c4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_7__EPIT1_EPITO				0x334 0x6c4 0x000 0x2 0x0
-#define MX53_PAD_GPIO_7__CAN1_TXCAN				0x334 0x6c4 0x000 0x3 0x0
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX				0x334 0x6c4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_7__FIRI_RXD				0x334 0x6c4 0x80c 0x5 0x1
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK				0x334 0x6c4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP				0x334 0x6c4 0x774 0x7 0x1
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0				0x338 0x6c8 0x7f8 0x0 0x1
-#define MX53_PAD_GPIO_8__GPIO1_8				0x338 0x6c8 0x000 0x1 0x0
-#define MX53_PAD_GPIO_8__EPIT2_EPITO				0x338 0x6c8 0x000 0x2 0x0
-#define MX53_PAD_GPIO_8__CAN1_RXCAN				0x338 0x6c8 0x760 0x3 0x2
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX				0x338 0x6c8 0x880 0x4 0x5
-#define MX53_PAD_GPIO_8__FIRI_TXD				0x338 0x6c8 0x000 0x5 0x0
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK				0x338 0x6c8 0x000 0x6 0x0
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP				0x338 0x6c8 0x778 0x7 0x1
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2				0x33c 0x6cc 0x7f0 0x0 0x1
-#define MX53_PAD_GPIO_16__GPIO7_11				0x33c 0x6cc 0x000 0x1 0x0
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT			0x33c 0x6cc 0x000 0x2 0x0
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1			0x33c 0x6cc 0x000 0x4 0x0
-#define MX53_PAD_GPIO_16__SPDIF_IN1				0x33c 0x6cc 0x870 0x5 0x1
-#define MX53_PAD_GPIO_16__I2C3_SDA				0x33c 0x6cc 0x828 0x6 0x2
-#define MX53_PAD_GPIO_16__SJC_DE_B				0x33c 0x6cc 0x000 0x7 0x0
-#define MX53_PAD_GPIO_17__ESAI1_TX0				0x340 0x6d0 0x7e4 0x0 0x1
-#define MX53_PAD_GPIO_17__GPIO7_12				0x340 0x6d0 0x000 0x1 0x0
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0			0x340 0x6d0 0x868 0x2 0x1
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY				0x340 0x6d0 0x810 0x3 0x1
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG			0x340 0x6d0 0x000 0x4 0x0
-#define MX53_PAD_GPIO_17__SPDIF_OUT1				0x340 0x6d0 0x000 0x5 0x0
-#define MX53_PAD_GPIO_17__IPU_SNOOP2				0x340 0x6d0 0x000 0x6 0x0
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT				0x340 0x6d0 0x000 0x7 0x0
-#define MX53_PAD_GPIO_18__ESAI1_TX1				0x344 0x6d4 0x7e8 0x0 0x1
-#define MX53_PAD_GPIO_18__GPIO7_13				0x344 0x6d4 0x000 0x1 0x0
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1			0x344 0x6d4 0x86c 0x2 0x1
-#define MX53_PAD_GPIO_18__OWIRE_LINE				0x344 0x6d4 0x864 0x3 0x1
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG		0x344 0x6d4 0x000 0x4 0x0
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK			0x344 0x6d4 0x768 0x5 0x1
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL				0x344 0x6d4 0x000 0x6 0x0
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST			0x344 0x6d4 0x000 0x7 0x0
-
-#endif /* __DTS_IMX53_PINFUNC_H */
diff --git a/src/arm/imx6dl-pinfunc.h b/src/arm/imx6dl-pinfunc.h
deleted file mode 100644
index 0ead323fdbd2..000000000000
--- a/src/arm/imx6dl-pinfunc.h
+++ /dev/null
@@ -1,1091 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX6DL_PINFUNC_H
-#define __DTS_IMX6DL_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x04c 0x360 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x04c 0x360 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x04c 0x360 0x7f8 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x04c 0x360 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x04c 0x360 0x8fc 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x04c 0x360 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x04c 0x360 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x050 0x364 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x050 0x364 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x050 0x364 0x800 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x050 0x364 0x8fc 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x050 0x364 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x050 0x364 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x050 0x364 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x054 0x368 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x054 0x368 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x054 0x368 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x054 0x368 0x914 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x054 0x368 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x054 0x368 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x058 0x36c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x058 0x36c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x058 0x36c 0x914 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x058 0x36c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x058 0x36c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x058 0x36c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x05c 0x370 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x05c 0x370 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x05c 0x370 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x05c 0x370 0x91c 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x05c 0x370 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x05c 0x370 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x060 0x374 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x060 0x374 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x060 0x374 0x91c 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x060 0x374 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x060 0x374 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x060 0x374 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x064 0x378 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x064 0x378 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x064 0x378 0x910 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x064 0x378 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x064 0x378 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x064 0x378 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x068 0x37c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x068 0x37c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x068 0x37c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x068 0x37c 0x910 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x068 0x37c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x068 0x37c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x06c 0x380 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x06c 0x380 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x06c 0x380 0x918 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x06c 0x380 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x06c 0x380 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x06c 0x380 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x070 0x384 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x070 0x384 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x070 0x384 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x070 0x384 0x918 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x070 0x384 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x074 0x388 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x074 0x388 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x074 0x388 0x7d8 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x074 0x388 0x8c0 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x074 0x388 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x074 0x388 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x074 0x388 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x078 0x38c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x078 0x38c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x078 0x38c 0x7e0 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x078 0x38c 0x8cc 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x078 0x38c 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x078 0x38c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x078 0x38c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x07c 0x390 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x07c 0x390 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x07c 0x390 0x7dc 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x07c 0x390 0x8c4 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x07c 0x390 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x07c 0x390 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x07c 0x390 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x080 0x394 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x080 0x394 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x080 0x394 0x7e4 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x080 0x394 0x8d0 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x080 0x394 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x080 0x394 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x080 0x394 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x084 0x398 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x084 0x398 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x084 0x398 0x7f4 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x084 0x398 0x8c8 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x084 0x398 0x86c 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x084 0x398 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x084 0x398 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x088 0x39c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x088 0x39c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x088 0x39c 0x7fc 0x2 0x0
-#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x088 0x39c 0x8d4 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x088 0x39c 0x868 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x088 0x39c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x088 0x39c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x08c 0x3a0 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x08c 0x3a0 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x08c 0x3a0 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x08c 0x3a0 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x090 0x3a4 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x090 0x3a4 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x090 0x3a4 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x090 0x3a4 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x094 0x3a8 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x094 0x3a8 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x094 0x3a8 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x098 0x3ac 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x098 0x3ac 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x098 0x3ac 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x098 0x3ac 0x000 0x7 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x09c 0x3b0 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__LCD_CLK            0x09c 0x3b0 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x09c 0x3b0 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__LCD_WR_RWN         0x09c 0x3b0 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN15__LCD_ENABLE            0x0a0 0x3b4 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN15__LCD_RD_E              0x0a0 0x3b4 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN2__LCD_HSYNC              0x0a4 0x3b8 0x8d8 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN2__LCD_RS                 0x0a4 0x3b8 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN3__LCD_VSYNC              0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN3__LCD_CS                 0x0a8 0x3bc 0x000 0x8 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN4__LCD_BUSY               0x0ac 0x3c0 0x8d8 0x1 0x1
-#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x0ac 0x3c0 0x92c 0x3 0x0
-#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN4__LCD_RESET              0x0ac 0x3c0 0x000 0x8 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT0__LCD_DATA00           0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT1__LCD_DATA01           0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT10__LCD_DATA10          0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT11__LCD_DATA11          0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT12__LCD_DATA12          0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT13__LCD_DATA13          0x0c4 0x3d8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x0c4 0x3d8 0x7bc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT14__LCD_DATA14          0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x0c8 0x3dc 0x7b8 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT15__LCD_DATA15          0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x0cc 0x3e0 0x7e8 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x0cc 0x3e0 0x804 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT16__LCD_DATA16          0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x0d0 0x3e4 0x7fc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x0d0 0x3e4 0x7c0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x0d0 0x3e4 0x8e8 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT17__LCD_DATA17          0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x0d4 0x3e8 0x7f8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x0d4 0x3e8 0x7b4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x0d4 0x3e8 0x8ec 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT18__LCD_DATA18          0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x0d8 0x3ec 0x800 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x0d8 0x3ec 0x7c4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x0d8 0x3ec 0x7a4 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT19__LCD_DATA19          0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x0dc 0x3f0 0x7f4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x0dc 0x3f0 0x7b0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x0dc 0x3f0 0x7a0 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT2__LCD_DATA02           0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x0e0 0x3f4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT20__LCD_DATA20          0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x0e4 0x3f8 0x7d8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x0e4 0x3f8 0x7a8 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT21__LCD_DATA21          0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x0e8 0x3fc 0x7e0 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x0e8 0x3fc 0x79c 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x0ec 0x400 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT22__LCD_DATA22          0x0ec 0x400 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x0ec 0x400 0x7dc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x0ec 0x400 0x7ac 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x0ec 0x400 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x0f0 0x404 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT23__LCD_DATA23          0x0f0 0x404 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x0f0 0x404 0x7e4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x0f0 0x404 0x798 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x0f0 0x404 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x0f4 0x408 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT3__LCD_DATA03           0x0f4 0x408 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x0f4 0x408 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x0f4 0x408 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x0f8 0x40c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT4__LCD_DATA04           0x0f8 0x40c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x0f8 0x40c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x0f8 0x40c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x0fc 0x410 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT5__LCD_DATA05           0x0fc 0x410 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x0fc 0x410 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x0fc 0x410 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x0fc 0x410 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x100 0x414 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT6__LCD_DATA06           0x100 0x414 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x100 0x414 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x100 0x414 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x100 0x414 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x104 0x418 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT7__LCD_DATA07           0x104 0x418 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x104 0x418 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x104 0x418 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x108 0x41c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT8__LCD_DATA08           0x108 0x41c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x108 0x41c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x108 0x41c 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x108 0x41c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x10c 0x420 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT9__LCD_DATA09           0x10c 0x420 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x10c 0x420 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x10c 0x420 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x10c 0x420 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x110 0x4e0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x110 0x4e0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK        0x110 0x4e0 0x8b8 0x2 0x0
-#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x110 0x4e0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x110 0x4e0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A16__EPDC_DATA00             0x110 0x4e0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x114 0x4e4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x114 0x4e4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12        0x114 0x4e4 0x890 0x2 0x0
-#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x114 0x4e4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x114 0x4e4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A17__EPDC_PWR_STAT           0x114 0x4e4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x118 0x4e8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x118 0x4e8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13        0x118 0x4e8 0x894 0x2 0x0
-#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x118 0x4e8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x118 0x4e8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A18__EPDC_PWR_CTRL0          0x118 0x4e8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x11c 0x4ec 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x11c 0x4ec 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14        0x11c 0x4ec 0x898 0x2 0x0
-#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x11c 0x4ec 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x11c 0x4ec 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A19__EPDC_PWR_CTRL1          0x11c 0x4ec 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x120 0x4f0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x120 0x4f0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15        0x120 0x4f0 0x89c 0x2 0x0
-#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x120 0x4f0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x120 0x4f0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A20__EPDC_PWR_CTRL2          0x120 0x4f0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x124 0x4f4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x124 0x4f4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16        0x124 0x4f4 0x8a0 0x2 0x0
-#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x124 0x4f4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x124 0x4f4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A21__EPDC_GDCLK              0x124 0x4f4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x128 0x4f8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x128 0x4f8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17        0x128 0x4f8 0x8a4 0x2 0x0
-#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x128 0x4f8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x128 0x4f8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A22__EPDC_GDSP               0x128 0x4f8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x12c 0x4fc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x12c 0x4fc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18        0x12c 0x4fc 0x8a8 0x2 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x12c 0x4fc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x12c 0x4fc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x12c 0x4fc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A23__EPDC_GDOE               0x12c 0x4fc 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x130 0x500 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x130 0x500 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19        0x130 0x500 0x8ac 0x2 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x130 0x500 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x130 0x500 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x130 0x500 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A24__EPDC_GDRL               0x130 0x500 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x134 0x504 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x134 0x504 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x134 0x504 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x134 0x504 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x134 0x504 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x134 0x504 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x134 0x504 0x85c 0x6 0x0
-#define MX6QDL_PAD_EIM_A25__EPDC_DATA15             0x134 0x504 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ACLK_FREERUN        0x134 0x504 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x138 0x508 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x138 0x508 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x138 0x508 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_BCLK__EPDC_SDCE9             0x138 0x508 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x13c 0x50c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x13c 0x50c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x13c 0x50c 0x7f4 0x2 0x2
-#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x13c 0x50c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS0__EPDC_DATA06             0x13c 0x50c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x140 0x510 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x140 0x510 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x140 0x510 0x7fc 0x2 0x2
-#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x140 0x510 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS1__EPDC_DATA08             0x140 0x510 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x144 0x514 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x144 0x514 0x7d8 0x1 0x2
-#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x144 0x514 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18        0x144 0x514 0x8a8 0x3 0x1
-#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x144 0x514 0x864 0x4 0x0
-#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x144 0x514 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x144 0x514 0x874 0x6 0x0
-#define MX6QDL_PAD_EIM_D16__EPDC_DATA10             0x144 0x514 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x148 0x518 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x148 0x518 0x7dc 0x1 0x2
-#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x148 0x518 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK        0x148 0x518 0x8b8 0x3 0x1
-#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x148 0x518 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x148 0x518 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x148 0x518 0x878 0x6 0x0
-#define MX6QDL_PAD_EIM_D17__EPDC_VCOM0              0x148 0x518 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x14c 0x51c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x14c 0x51c 0x7e0 0x1 0x2
-#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x14c 0x51c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17        0x14c 0x51c 0x8a4 0x3 0x1
-#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x14c 0x51c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x14c 0x51c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x14c 0x51c 0x87c 0x6 0x0
-#define MX6QDL_PAD_EIM_D18__EPDC_VCOM1              0x14c 0x51c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x150 0x520 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x150 0x520 0x7e8 0x1 0x1
-#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x150 0x520 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16        0x150 0x520 0x8a0 0x3 0x1
-#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x150 0x520 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x150 0x520 0x8f8 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x150 0x520 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x150 0x520 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D19__EPDC_DATA12             0x150 0x520 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x154 0x524 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x154 0x524 0x808 0x1 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x154 0x524 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15        0x154 0x524 0x89c 0x3 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x154 0x524 0x8f8 0x4 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x154 0x524 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x154 0x524 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x154 0x524 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x158 0x528 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x158 0x528 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x158 0x528 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_CSI1_DATA11        0x158 0x528 0x88c 0x3 0x0
-#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x158 0x528 0x920 0x4 0x0
-#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x158 0x528 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x158 0x528 0x868 0x6 0x1
-#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x158 0x528 0x8f0 0x7 0x0
-#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x15c 0x52c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x15c 0x52c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x15c 0x52c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_CSI1_DATA10        0x15c 0x52c 0x888 0x3 0x0
-#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x15c 0x52c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x15c 0x52c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x15c 0x52c 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D22__EPDC_SDCE6              0x15c 0x52c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x160 0x530 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x160 0x530 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x160 0x530 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x160 0x530 0x908 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x160 0x530 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_CSI1_DATA_EN       0x160 0x530 0x8b0 0x4 0x0
-#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x160 0x530 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x160 0x530 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x160 0x530 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D23__EPDC_DATA11             0x160 0x530 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x164 0x534 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x164 0x534 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x164 0x534 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x164 0x534 0x90c 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x164 0x534 0x7ec 0x3 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x164 0x534 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x164 0x534 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x164 0x534 0x7bc 0x6 0x1
-#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x164 0x534 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D24__EPDC_SDCE7              0x164 0x534 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x168 0x538 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x168 0x538 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x168 0x538 0x90c 0x2 0x1
-#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x168 0x538 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x168 0x538 0x7f0 0x3 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x168 0x538 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x168 0x538 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x168 0x538 0x7b8 0x6 0x1
-#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x168 0x538 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D25__EPDC_SDCE8              0x168 0x538 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x16c 0x53c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x16c 0x53c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x16c 0x53c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14        0x16c 0x53c 0x898 0x3 0x1
-#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x16c 0x53c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x16c 0x53c 0x904 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x16c 0x53c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x16c 0x53c 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x16c 0x53c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D26__EPDC_SDOED              0x16c 0x53c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x170 0x540 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x170 0x540 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x170 0x540 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13        0x170 0x540 0x894 0x3 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x170 0x540 0x904 0x4 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x170 0x540 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x170 0x540 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x170 0x540 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x170 0x540 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D27__EPDC_SDOE               0x170 0x540 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x174 0x544 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x174 0x544 0x86c 0x1 0x1
-#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x174 0x544 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_CSI1_DATA12        0x174 0x544 0x890 0x3 0x1
-#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x174 0x544 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x174 0x544 0x900 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x174 0x544 0x900 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x174 0x544 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x174 0x544 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x174 0x544 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x174 0x544 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D28__EPDC_PWR_CTRL3          0x174 0x544 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x178 0x548 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x178 0x548 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x178 0x548 0x808 0x2 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x178 0x548 0x900 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x178 0x548 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x178 0x548 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x178 0x548 0x900 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x178 0x548 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC         0x178 0x548 0x8bc 0x6 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x178 0x548 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D29__EPDC_PWR_WAKE           0x178 0x548 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x17c 0x54c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x17c 0x54c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x17c 0x54c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x17c 0x54c 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x17c 0x54c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x17c 0x54c 0x908 0x4 0x1
-#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x17c 0x54c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x17c 0x54c 0x924 0x6 0x0
-#define MX6QDL_PAD_EIM_D30__EPDC_SDOEZ              0x17c 0x54c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x180 0x550 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x180 0x550 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x180 0x550 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x180 0x550 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x180 0x550 0x908 0x4 0x2
-#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x180 0x550 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x180 0x550 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x180 0x550 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D31__EPDC_SDCLK_P            0x180 0x550 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_ACLK_FREERUN        0x180 0x550 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x184 0x554 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x184 0x554 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_CSI1_DATA09        0x184 0x554 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x184 0x554 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x184 0x554 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA0__EPDC_SDCLK_N            0x184 0x554 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x188 0x558 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x188 0x558 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_CSI1_DATA08        0x188 0x558 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x188 0x558 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x188 0x558 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA1__EPDC_SDLE               0x188 0x558 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x18c 0x55c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x18c 0x55c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_CSI1_DATA_EN      0x18c 0x55c 0x8b0 0x2 0x1
-#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x18c 0x55c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x18c 0x55c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA10__EPDC_DATA01            0x18c 0x55c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x190 0x560 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x190 0x560 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_CSI1_HSYNC        0x190 0x560 0x8b4 0x2 0x0
-#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x190 0x560 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x190 0x560 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA11__EPDC_DATA03            0x190 0x560 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x194 0x564 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x194 0x564 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_CSI1_VSYNC        0x194 0x564 0x8bc 0x2 0x1
-#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x194 0x564 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x194 0x564 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA12__EPDC_DATA02            0x194 0x564 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x198 0x568 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x198 0x568 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x198 0x568 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x198 0x568 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA13__EPDC_DATA13            0x198 0x568 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x19c 0x56c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x19c 0x56c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x19c 0x56c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x19c 0x56c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA14__EPDC_DATA14            0x19c 0x56c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x1a0 0x570 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x1a0 0x570 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x1a0 0x570 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x1a0 0x570 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x1a0 0x570 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA15__EPDC_DATA09            0x1a0 0x570 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x1a4 0x574 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x1a4 0x574 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_CSI1_DATA07        0x1a4 0x574 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x1a4 0x574 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x1a4 0x574 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA2__EPDC_BDR0               0x1a4 0x574 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x1a8 0x578 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x1a8 0x578 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_CSI1_DATA06        0x1a8 0x578 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x1a8 0x578 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x1a8 0x578 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA3__EPDC_BDR1               0x1a8 0x578 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x1ac 0x57c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x1ac 0x57c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_CSI1_DATA05        0x1ac 0x57c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x1ac 0x57c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x1ac 0x57c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA4__EPDC_SDCE0              0x1ac 0x57c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x1b0 0x580 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x1b0 0x580 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_CSI1_DATA04        0x1b0 0x580 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x1b0 0x580 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x1b0 0x580 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA5__EPDC_SDCE1              0x1b0 0x580 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x1b4 0x584 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x1b4 0x584 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_CSI1_DATA03        0x1b4 0x584 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x1b4 0x584 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x1b4 0x584 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA6__EPDC_SDCE2              0x1b4 0x584 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x1b8 0x588 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x1b8 0x588 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_CSI1_DATA02        0x1b8 0x588 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x1b8 0x588 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x1b8 0x588 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA7__EPDC_SDCE3              0x1b8 0x588 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x1bc 0x58c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x1bc 0x58c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_CSI1_DATA01        0x1bc 0x58c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x1bc 0x58c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x1bc 0x58c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA8__EPDC_SDCE4              0x1bc 0x58c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x1c0 0x590 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x1c0 0x590 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_CSI1_DATA00        0x1c0 0x590 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x1c0 0x590 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x1c0 0x590 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA9__EPDC_SDCE5              0x1c0 0x590 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x1c4 0x594 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x1c4 0x594 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_CSI1_DATA11        0x1c4 0x594 0x88c 0x2 0x1
-#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x1c4 0x594 0x7d4 0x4 0x0
-#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x1c4 0x594 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x1c4 0x594 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB0__EPDC_PWR_COM            0x1c4 0x594 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x1c8 0x598 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x1c8 0x598 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_CSI1_DATA10        0x1c8 0x598 0x888 0x2 0x1
-#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x1c8 0x598 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x1c8 0x598 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB1__EPDC_SDSHR              0x1c8 0x598 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x1cc 0x59c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x1cc 0x59c 0x7e4 0x1 0x2
-#define MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19        0x1cc 0x59c 0x8ac 0x3 0x1
-#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x1cc 0x59c 0x860 0x4 0x0
-#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x1cc 0x59c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x1cc 0x59c 0x870 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x1cc 0x59c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB2__EPDC_DATA05             0x1cc 0x59c 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x1d0 0x5a0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x1d0 0x5a0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x1d0 0x5a0 0x908 0x2 0x3
-#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x1d0 0x5a0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x1d0 0x5a0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC         0x1d0 0x5a0 0x8b4 0x4 0x1
-#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x1d0 0x5a0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x1d0 0x5a0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x1d0 0x5a0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB3__EPDC_SDCE0              0x1d0 0x5a0 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_ACLK_FREERUN        0x1d0 0x5a0 0x000 0x9 0x0
-#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x1d4 0x5a4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x1d4 0x5a4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x1d4 0x5a4 0x804 0x2 0x1
-#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x1d4 0x5a4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x1d4 0x5a4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_LBA__EPDC_DATA04             0x1d4 0x5a4 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x1d8 0x5a8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x1d8 0x5a8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x1d8 0x5a8 0x7f8 0x2 0x2
-#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x1d8 0x5a8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_OE__EPDC_PWR_IRQ             0x1d8 0x5a8 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x1dc 0x5ac 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x1dc 0x5ac 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x1dc 0x5ac 0x800 0x2 0x2
-#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x1dc 0x5ac 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x1dc 0x5ac 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_RW__EPDC_DATA07              0x1dc 0x5ac 0x000 0x8 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x1e0 0x5b0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x1e0 0x5b0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x1e0 0x5b0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x1e0 0x5b0 0x000 0x7 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1e4 0x5b4 0x828 0x1 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1e4 0x5b4 0x840 0x2 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1e4 0x5b4 0x8f4 0x3 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1e4 0x5b4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1e8 0x5b8 0x8e0 0x0 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1e8 0x5b8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1e8 0x5b8 0x858 0x2 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1e8 0x5b8 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1e8 0x5b8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1ec 0x5bc 0x810 0x1 0x0
-#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1ec 0x5bc 0x83c 0x2 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1ec 0x5bc 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1ec 0x5bc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1ec 0x5bc 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1f0 0x5c0 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1f0 0x5c0 0x82c 0x2 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1f0 0x5c0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1f0 0x5c0 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1f4 0x5c4 0x790 0x0 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1f4 0x5c4 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1f4 0x5c4 0x834 0x2 0x0
-#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
-#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
-#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1fc 0x5cc 0x8e4 0x0 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1fc 0x5cc 0x81c 0x1 0x0
-#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1fc 0x5cc 0x830 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x200 0x5d0 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x200 0x5d0 0x850 0x2 0x0
-#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x200 0x5d0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__I2C4_SCL             0x200 0x5d0 0x880 0x9 0x0
-#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x204 0x5d4 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x204 0x5d4 0x854 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x204 0x5d4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x208 0x5d8 0x8dc 0x0 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x208 0x5d8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x208 0x5d8 0x84c 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x208 0x5d8 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x208 0x5d8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__I2C4_SDA              0x208 0x5d8 0x884 0x9 0x0
-#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x20c 0x5dc 0x000 0x0 0x0
-#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x20c 0x5dc 0x8c0 0x2 0x1
-#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x20c 0x5dc 0x794 0x3 0x0
-#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x20c 0x5dc 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x20c 0x5dc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x20c 0x5dc 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x20c 0x5dc 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x210 0x5e0 0x83c 0x0 0x1
-#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x210 0x5e0 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x210 0x5e0 0x8cc 0x2 0x1
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x210 0x5e0 0x790 0x3 0x1
-#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x210 0x5e0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x210 0x5e0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x210 0x5e0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x214 0x5e4 0x850 0x0 0x1
-#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x214 0x5e4 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x214 0x5e4 0x80c 0x2 0x0
-#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x214 0x5e4 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x214 0x5e4 0x8f0 0x4 0x2
-#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x214 0x5e4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x214 0x5e4 0x87c 0x6 0x1
-#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x214 0x5e4 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x218 0x5e8 0x844 0x0 0x0
-#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x218 0x5e8 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x218 0x5e8 0x7d4 0x2 0x1
-#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x218 0x5e8 0x8e8 0x3 0x1
-#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x218 0x5e8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x218 0x5e8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x21c 0x5ec 0x848 0x0 0x0
-#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x21c 0x5ec 0x814 0x1 0x0
-#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x21c 0x5ec 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x21c 0x5ec 0x8ec 0x3 0x1
-#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x21c 0x5ec 0x794 0x4 0x1
-#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x21c 0x5ec 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x21c 0x5ec 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x220 0x5f0 0x8c0 0x0 0x2
-#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x220 0x5f0 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x220 0x5f0 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x220 0x5f0 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x220 0x5f0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x220 0x5f0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x220 0x5f0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x224 0x5f4 0x830 0x0 0x1
-#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x224 0x5f4 0x8d0 0x2 0x1
-#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x224 0x5f4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x224 0x5f4 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x224 0x5f4 0x8e0 0x7 0x1
-#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x228 0x5f8 0x834 0x0 0x1
-#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x228 0x5f8 0x878 0x2 0x1
-#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x228 0x5f8 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x228 0x5f8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x228 0x5f8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x228 0x5f8 0x924 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x228 0x5f8 0x8dc 0x7 0x1
-#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x22c 0x5fc 0x838 0x0 0x1
-#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x22c 0x5fc 0x8c8 0x2 0x1
-#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x22c 0x5fc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x22c 0x5fc 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x230 0x600 0x84c 0x0 0x1
-#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x230 0x600 0x8d4 0x2 0x1
-#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x230 0x600 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x230 0x600 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x230 0x600 0x878 0x6 0x2
-#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x230 0x600 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x234 0x604 0x840 0x0 0x1
-#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x234 0x604 0x03c 0x11 0xff000609
-#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x234 0x604 0x87c 0x2 0x2
-#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x234 0x604 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x234 0x604 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x234 0x604 0x8e4 0x7 0x1
-#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x238 0x608 0x854 0x0 0x1
-#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x238 0x608 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x238 0x608 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x238 0x608 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x238 0x608 0x904 0x4 0x2
-#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x238 0x608 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x238 0x608 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x238 0x608 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_7__I2C4_SCL                 0x238 0x608 0x880 0x8 0x1
-#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x23c 0x60c 0x858 0x0 0x1
-#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x23c 0x60c 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x23c 0x60c 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x23c 0x60c 0x7c8 0x3 0x0
-#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x23c 0x60c 0x904 0x4 0x3
-#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x23c 0x60c 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x23c 0x60c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x23c 0x60c 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x23c 0x60c 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_8__I2C4_SDA                 0x23c 0x60c 0x884 0x8 0x1
-#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x240 0x610 0x82c 0x0 0x1
-#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x240 0x610 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x240 0x610 0x8c4 0x2 0x1
-#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x240 0x610 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x240 0x610 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x240 0x610 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x240 0x610 0x92c 0x6 0x1
-#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x244 0x62c 0x7d8 0x0 0x3
-#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x244 0x62c 0x824 0x1 0x0
-#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x244 0x62c 0x7c0 0x2 0x1
-#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x244 0x62c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x244 0x62c 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x244 0x62c 0x914 0x4 0x2
-#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x244 0x62c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x244 0x62c 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x248 0x630 0x7dc 0x0 0x3
-#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x248 0x630 0x810 0x1 0x1
-#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x248 0x630 0x7c4 0x2 0x1
-#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x248 0x630 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x248 0x630 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x248 0x630 0x91c 0x4 0x2
-#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x248 0x630 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x248 0x630 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x24c 0x634 0x7e8 0x0 0x2
-#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x24c 0x634 0x820 0x1 0x0
-#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x24c 0x634 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x24c 0x634 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x24c 0x634 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x24c 0x634 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x24c 0x634 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x250 0x638 0x7f0 0x0 0x1
-#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x250 0x638 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x250 0x638 0x860 0x2 0x1
-#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x250 0x638 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x250 0x638 0x870 0x4 0x1
-#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x250 0x638 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x250 0x638 0x8f0 0x6 0x3
-#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x254 0x63c 0x000 0x0 0x0
-#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x254 0x63c 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x254 0x63c 0x920 0x2 0x1
-#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x254 0x63c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x254 0x63c 0x918 0x4 0x2
-#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x254 0x63c 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x254 0x63c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x258 0x640 0x7e0 0x0 0x3
-#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x258 0x640 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x258 0x640 0x7b4 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x258 0x640 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x258 0x640 0x914 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x258 0x640 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x258 0x640 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x258 0x640 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x25c 0x644 0x7e4 0x0 0x3
-#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x25c 0x644 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x25c 0x644 0x7b0 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x25c 0x644 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x25c 0x644 0x91c 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x25c 0x644 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x25c 0x644 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x25c 0x644 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x260 0x648 0x7ec 0x0 0x1
-#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x260 0x648 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x260 0x648 0x7c8 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x260 0x648 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x260 0x648 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x260 0x648 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x260 0x648 0x85c 0x6 0x1
-#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x264 0x64c 0x794 0x1 0x2
-#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x264 0x64c 0x864 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x264 0x64c 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x264 0x64c 0x874 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x264 0x64c 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x264 0x64c 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x268 0x650 0x7cc 0x0 0x0
-#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x268 0x650 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x268 0x650 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x268 0x650 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x268 0x650 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x268 0x650 0x918 0x4 0x3
-#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x268 0x650 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x26c 0x654 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x26c 0x654 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x26c 0x654 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x270 0x658 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x270 0x658 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x274 0x65c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x274 0x65c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x278 0x660 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x278 0x660 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x278 0x660 0x000 0x2 0x0
-#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x278 0x660 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x27c 0x664 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x27c 0x664 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x27c 0x664 0x844 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x27c 0x664 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x27c 0x664 0x000 0x4 0x0
-#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x27c 0x664 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x280 0x668 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x280 0x668 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x280 0x668 0x848 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x280 0x668 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x280 0x668 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__I2C4_SDA              0x280 0x668 0x884 0x9 0x2
-#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x284 0x66c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x284 0x66c 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x284 0x66c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x288 0x670 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x288 0x670 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x288 0x670 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x28c 0x674 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x28c 0x674 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x28c 0x674 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x290 0x678 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x290 0x678 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x290 0x678 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x294 0x67c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x294 0x67c 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x294 0x67c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x298 0x680 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x298 0x680 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x298 0x680 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x29c 0x684 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x29c 0x684 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x29c 0x684 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x2a0 0x688 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x2a0 0x688 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x2a0 0x688 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2a4 0x68c 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2a4 0x68c 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2a8 0x690 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2a8 0x690 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__I2C4_SCL             0x2a8 0x690 0x880 0x9 0x2
-#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x2ac 0x694 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x2ac 0x694 0x818 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x2ac 0x694 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x2b0 0x698 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x2b0 0x698 0x81c 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x2b0 0x698 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x2b4 0x69c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x2b4 0x69c 0x820 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x2b4 0x69c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x2b8 0x6a0 0x824 0x1 0x1
-#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x2bc 0x6a4 0x828 0x1 0x1
-#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x2c0 0x6a8 0x814 0x1 0x1
-#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x2c8 0x6b0 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x2d4 0x6bc 0x80c 0x7 0x1
-#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x2d8 0x6c0 0x8f4 0x2 0x1
-#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x2d8 0x6c0 0x000 0x7 0x0
-#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x2dc 0x6c4 0x928 0x0 0x1
-#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x2dc 0x6c4 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x2dc 0x6c4 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x2e0 0x6c8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x2e0 0x6c8 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x2e4 0x6cc 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x2e8 0x6d0 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x2ec 0x6d4 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x2f0 0x6d8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x2f0 0x6d8 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x2f4 0x6dc 0x930 0x0 0x1
-#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x2f4 0x6dc 0x8c0 0x2 0x3
-#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x2f4 0x6dc 0x7a4 0x3 0x1
-#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x2f8 0x6e0 0x8cc 0x2 0x2
-#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x2f8 0x6e0 0x7a0 0x3 0x1
-#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x2fc 0x6e4 0x798 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x2fc 0x6e4 0x8d4 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x2fc 0x6e4 0x000 0x6 0x0
-#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x300 0x6e8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x300 0x6e8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x300 0x6e8 0x7ac 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x300 0x6e8 0x8c8 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x300 0x6e8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x304 0x6ec 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x304 0x6ec 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x304 0x6ec 0x79c 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x304 0x6ec 0x8d0 0x4 0x2
-#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x304 0x6ec 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x308 0x6f0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x308 0x6f0 0x8c4 0x2 0x2
-#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x308 0x6f0 0x7a8 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x308 0x6f0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x30c 0x6f4 0x934 0x0 0x1
-#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x30c 0x6f4 0x900 0x1 0x2
-#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x30c 0x6f4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x30c 0x6f4 0x7c8 0x2 0x2
-#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x30c 0x6f4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x310 0x6f8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x310 0x6f8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x310 0x6f8 0x900 0x1 0x3
-#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x310 0x6f8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x310 0x6f8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x314 0x6fc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x314 0x6fc 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x314 0x6fc 0x8f8 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x314 0x6fc 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x314 0x6fc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x318 0x700 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x318 0x700 0x8f8 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x318 0x700 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x318 0x700 0x7cc 0x2 0x1
-#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x318 0x700 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x31c 0x704 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x31c 0x704 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x320 0x708 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x320 0x708 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x320 0x708 0x908 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x320 0x708 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x324 0x70c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x324 0x70c 0x904 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x324 0x70c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x324 0x70c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x328 0x710 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x328 0x710 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x328 0x710 0x904 0x1 0x5
-#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x328 0x710 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x32c 0x714 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x32c 0x714 0x8fc 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x32c 0x714 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x32c 0x714 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x330 0x718 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x330 0x718 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x330 0x718 0x8fc 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x330 0x718 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x334 0x71c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x334 0x71c 0x908 0x1 0x5
-#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x334 0x71c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x334 0x71c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x338 0x720 0x938 0x0 0x1
-#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x338 0x720 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x338 0x720 0x90c 0x2 0x2
-#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x338 0x720 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x338 0x720 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x33c 0x724 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x33c 0x724 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x33c 0x724 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x33c 0x724 0x90c 0x2 0x3
-#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x33c 0x724 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x340 0x728 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x340 0x728 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x340 0x728 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x344 0x72c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x344 0x72c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x344 0x72c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x348 0x730 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x348 0x730 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x348 0x730 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x34c 0x734 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x34c 0x734 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x350 0x738 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x350 0x738 0x904 0x2 0x6
-#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x350 0x738 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x350 0x738 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x354 0x73c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x354 0x73c 0x900 0x2 0x4
-#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x354 0x73c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x354 0x73c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x358 0x740 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x358 0x740 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x358 0x740 0x900 0x2 0x5
-#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x358 0x740 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x35c 0x744 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x35c 0x744 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x35c 0x744 0x904 0x2 0x7
-#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x35c 0x744 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6DL_PINFUNC_H */
diff --git a/src/arm/imx6q-pinfunc.h b/src/arm/imx6q-pinfunc.h
deleted file mode 100644
index 9fc6120a1853..000000000000
--- a/src/arm/imx6q-pinfunc.h
+++ /dev/null
@@ -1,1047 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX6Q_PINFUNC_H
-#define __DTS_IMX6Q_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6QDL_PAD_SD2_DAT1__SD2_DATA1              0x04c 0x360 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0             0x04c 0x360 0x834 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B              0x04c 0x360 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS              0x04c 0x360 0x7c8 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT1__KEY_COL7               0x04c 0x360 0x8f0 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14             0x04c 0x360 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT2__SD2_DATA2              0x050 0x364 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1             0x050 0x364 0x838 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B              0x050 0x364 0x000 0x2 0x0
-#define MX6QDL_PAD_SD2_DAT2__AUD4_TXD               0x050 0x364 0x7b8 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT2__KEY_ROW6               0x050 0x364 0x8f8 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT2__GPIO1_IO13             0x050 0x364 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__SD2_DATA0              0x054 0x368 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO            0x054 0x368 0x82c 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x054 0x368 0x7b4 0x3 0x0
-#define MX6QDL_PAD_SD2_DAT0__KEY_ROW7               0x054 0x368 0x8fc 0x4 0x0
-#define MX6QDL_PAD_SD2_DAT0__GPIO1_IO15             0x054 0x368 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT0__DCIC2_OUT              0x054 0x368 0x000 0x6 0x0
-#define MX6QDL_PAD_RGMII_TXC__USB_H2_DATA           0x058 0x36c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TXC__RGMII_TXC             0x058 0x36c 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TXC__SPDIF_EXT_CLK         0x058 0x36c 0x918 0x2 0x0
-#define MX6QDL_PAD_RGMII_TXC__GPIO6_IO19            0x058 0x36c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TXC__XTALOSC_REF_CLK_24M   0x058 0x36c 0x000 0x7 0x0
-#define MX6QDL_PAD_RGMII_TD0__HSI_TX_READY          0x05c 0x370 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD0__RGMII_TD0             0x05c 0x370 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD0__GPIO6_IO20            0x05c 0x370 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD1__HSI_RX_FLAG           0x060 0x374 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD1__RGMII_TD1             0x060 0x374 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD1__GPIO6_IO21            0x060 0x374 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD2__HSI_RX_DATA           0x064 0x378 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD2__RGMII_TD2             0x064 0x378 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD2__GPIO6_IO22            0x064 0x378 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TD3__HSI_RX_WAKE           0x068 0x37c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TD3__RGMII_TD3             0x068 0x37c 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TD3__GPIO6_IO23            0x068 0x37c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__USB_H3_DATA        0x06c 0x380 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL       0x06c 0x380 0x858 0x1 0x0
-#define MX6QDL_PAD_RGMII_RX_CTL__GPIO6_IO24         0x06c 0x380 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD0__HSI_RX_READY          0x070 0x384 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD0__RGMII_RD0             0x070 0x384 0x848 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD0__GPIO6_IO25            0x070 0x384 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE      0x074 0x388 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL       0x074 0x388 0x000 0x1 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26         0x074 0x388 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_TX_CTL__ENET_REF_CLK       0x074 0x388 0x83c 0x7 0x0
-#define MX6QDL_PAD_RGMII_RD1__HSI_TX_FLAG           0x078 0x38c 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD1__RGMII_RD1             0x078 0x38c 0x84c 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD1__GPIO6_IO27            0x078 0x38c 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD2__HSI_TX_DATA           0x07c 0x390 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD2__RGMII_RD2             0x07c 0x390 0x850 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD2__GPIO6_IO28            0x07c 0x390 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RD3__HSI_TX_WAKE           0x080 0x394 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RD3__RGMII_RD3             0x080 0x394 0x854 0x1 0x0
-#define MX6QDL_PAD_RGMII_RD3__GPIO6_IO29            0x080 0x394 0x000 0x5 0x0
-#define MX6QDL_PAD_RGMII_RXC__USB_H3_STROBE         0x084 0x398 0x000 0x0 0x0
-#define MX6QDL_PAD_RGMII_RXC__RGMII_RXC             0x084 0x398 0x844 0x1 0x0
-#define MX6QDL_PAD_RGMII_RXC__GPIO6_IO30            0x084 0x398 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__EIM_ADDR25              0x088 0x39c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI4_SS1              0x088 0x39c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A25__ECSPI2_RDY              0x088 0x39c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI1_PIN12          0x088 0x39c 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A25__IPU1_DI0_D1_CS          0x088 0x39c 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A25__GPIO5_IO02              0x088 0x39c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE        0x088 0x39c 0x88c 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__EIM_EB2_B               0x08c 0x3a0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB2__ECSPI1_SS0              0x08c 0x3a0 0x800 0x1 0x0
-#define MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19        0x08c 0x3a0 0x8d4 0x3 0x0
-#define MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL         0x08c 0x3a0 0x890 0x4 0x0
-#define MX6QDL_PAD_EIM_EB2__GPIO2_IO30              0x08c 0x3a0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB2__I2C2_SCL                0x08c 0x3a0 0x8a0 0x6 0x0
-#define MX6QDL_PAD_EIM_EB2__SRC_BOOT_CFG30          0x08c 0x3a0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D16__EIM_DATA16              0x090 0x3a4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D16__ECSPI1_SCLK             0x090 0x3a4 0x7f4 0x1 0x0
-#define MX6QDL_PAD_EIM_D16__IPU1_DI0_PIN05          0x090 0x3a4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18        0x090 0x3a4 0x8d0 0x3 0x0
-#define MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA         0x090 0x3a4 0x894 0x4 0x0
-#define MX6QDL_PAD_EIM_D16__GPIO3_IO16              0x090 0x3a4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D16__I2C2_SDA                0x090 0x3a4 0x8a4 0x6 0x0
-#define MX6QDL_PAD_EIM_D17__EIM_DATA17              0x094 0x3a8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D17__ECSPI1_MISO             0x094 0x3a8 0x7f8 0x1 0x0
-#define MX6QDL_PAD_EIM_D17__IPU1_DI0_PIN06          0x094 0x3a8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D17__IPU2_CSI1_PIXCLK        0x094 0x3a8 0x8e0 0x3 0x0
-#define MX6QDL_PAD_EIM_D17__DCIC1_OUT               0x094 0x3a8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D17__GPIO3_IO17              0x094 0x3a8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D17__I2C3_SCL                0x094 0x3a8 0x8a8 0x6 0x0
-#define MX6QDL_PAD_EIM_D18__EIM_DATA18              0x098 0x3ac 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D18__ECSPI1_MOSI             0x098 0x3ac 0x7fc 0x1 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_DI0_PIN07          0x098 0x3ac 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17        0x098 0x3ac 0x8cc 0x3 0x0
-#define MX6QDL_PAD_EIM_D18__IPU1_DI1_D0_CS          0x098 0x3ac 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D18__GPIO3_IO18              0x098 0x3ac 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D18__I2C3_SDA                0x098 0x3ac 0x8ac 0x6 0x0
-#define MX6QDL_PAD_EIM_D19__EIM_DATA19              0x09c 0x3b0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D19__ECSPI1_SS1              0x09c 0x3b0 0x804 0x1 0x0
-#define MX6QDL_PAD_EIM_D19__IPU1_DI0_PIN08          0x09c 0x3b0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16        0x09c 0x3b0 0x8c8 0x3 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_CTS_B             0x09c 0x3b0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__UART1_RTS_B             0x09c 0x3b0 0x91c 0x4 0x0
-#define MX6QDL_PAD_EIM_D19__GPIO3_IO19              0x09c 0x3b0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D19__EPIT1_OUT               0x09c 0x3b0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D20__EIM_DATA20              0x0a0 0x3b4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D20__ECSPI4_SS0              0x0a0 0x3b4 0x824 0x1 0x0
-#define MX6QDL_PAD_EIM_D20__IPU1_DI0_PIN16          0x0a0 0x3b4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15        0x0a0 0x3b4 0x8c4 0x3 0x0
-#define MX6QDL_PAD_EIM_D20__UART1_RTS_B             0x0a0 0x3b4 0x91c 0x4 0x1
-#define MX6QDL_PAD_EIM_D20__UART1_CTS_B             0x0a0 0x3b4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D20__GPIO3_IO20              0x0a0 0x3b4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D20__EPIT2_OUT               0x0a0 0x3b4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__EIM_DATA21              0x0a4 0x3b8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D21__ECSPI4_SCLK             0x0a4 0x3b8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D21__IPU1_DI0_PIN17          0x0a4 0x3b8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D21__IPU2_CSI1_DATA11        0x0a4 0x3b8 0x8b4 0x3 0x0
-#define MX6QDL_PAD_EIM_D21__USB_OTG_OC              0x0a4 0x3b8 0x944 0x4 0x0
-#define MX6QDL_PAD_EIM_D21__GPIO3_IO21              0x0a4 0x3b8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D21__I2C1_SCL                0x0a4 0x3b8 0x898 0x6 0x0
-#define MX6QDL_PAD_EIM_D21__SPDIF_IN                0x0a4 0x3b8 0x914 0x7 0x0
-#define MX6QDL_PAD_EIM_D22__EIM_DATA22              0x0a8 0x3bc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D22__ECSPI4_MISO             0x0a8 0x3bc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D22__IPU1_DI0_PIN01          0x0a8 0x3bc 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D22__IPU2_CSI1_DATA10        0x0a8 0x3bc 0x8b0 0x3 0x0
-#define MX6QDL_PAD_EIM_D22__USB_OTG_PWR             0x0a8 0x3bc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D22__GPIO3_IO22              0x0a8 0x3bc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D22__SPDIF_OUT               0x0a8 0x3bc 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__EIM_DATA23              0x0ac 0x3c0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI0_D0_CS          0x0ac 0x3c0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_CTS_B             0x0ac 0x3c0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART3_RTS_B             0x0ac 0x3c0 0x92c 0x2 0x0
-#define MX6QDL_PAD_EIM_D23__UART1_DCD_B             0x0ac 0x3c0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D23__IPU2_CSI1_DATA_EN       0x0ac 0x3c0 0x8d8 0x4 0x0
-#define MX6QDL_PAD_EIM_D23__GPIO3_IO23              0x0ac 0x3c0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN02          0x0ac 0x3c0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D23__IPU1_DI1_PIN14          0x0ac 0x3c0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB3__EIM_EB3_B               0x0b0 0x3c4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB3__ECSPI4_RDY              0x0b0 0x3c4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB3__UART3_RTS_B             0x0b0 0x3c4 0x92c 0x2 0x1
-#define MX6QDL_PAD_EIM_EB3__UART3_CTS_B             0x0b0 0x3c4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_EB3__UART1_RI_B              0x0b0 0x3c4 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC         0x0b0 0x3c4 0x8dc 0x4 0x0
-#define MX6QDL_PAD_EIM_EB3__GPIO2_IO31              0x0b0 0x3c4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB3__IPU1_DI1_PIN03          0x0b0 0x3c4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_EB3__SRC_BOOT_CFG31          0x0b0 0x3c4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D24__EIM_DATA24              0x0b4 0x3c8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI4_SS2              0x0b4 0x3c8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_TX_DATA           0x0b4 0x3c8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__UART3_RX_DATA           0x0b4 0x3c8 0x930 0x2 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI1_SS2              0x0b4 0x3c8 0x808 0x3 0x0
-#define MX6QDL_PAD_EIM_D24__ECSPI2_SS2              0x0b4 0x3c8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D24__GPIO3_IO24              0x0b4 0x3c8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D24__AUD5_RXFS               0x0b4 0x3c8 0x7d8 0x6 0x0
-#define MX6QDL_PAD_EIM_D24__UART1_DTR_B             0x0b4 0x3c8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D25__EIM_DATA25              0x0b8 0x3cc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI4_SS3              0x0b8 0x3cc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D25__UART3_RX_DATA           0x0b8 0x3cc 0x930 0x2 0x1
-#define MX6QDL_PAD_EIM_D25__UART3_TX_DATA           0x0b8 0x3cc 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI1_SS3              0x0b8 0x3cc 0x80c 0x3 0x0
-#define MX6QDL_PAD_EIM_D25__ECSPI2_SS3              0x0b8 0x3cc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D25__GPIO3_IO25              0x0b8 0x3cc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D25__AUD5_RXC                0x0b8 0x3cc 0x7d4 0x6 0x0
-#define MX6QDL_PAD_EIM_D25__UART1_DSR_B             0x0b8 0x3cc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D26__EIM_DATA26              0x0bc 0x3d0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DI1_PIN11          0x0bc 0x3d0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_CSI0_DATA01        0x0bc 0x3d0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14        0x0bc 0x3d0 0x8c0 0x3 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_TX_DATA           0x0bc 0x3d0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__UART2_RX_DATA           0x0bc 0x3d0 0x928 0x4 0x0
-#define MX6QDL_PAD_EIM_D26__GPIO3_IO26              0x0bc 0x3d0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_SISG2              0x0bc 0x3d0 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22       0x0bc 0x3d0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D27__EIM_DATA27              0x0c0 0x3d4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DI1_PIN13          0x0c0 0x3d4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_CSI0_DATA00        0x0c0 0x3d4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13        0x0c0 0x3d4 0x8bc 0x3 0x0
-#define MX6QDL_PAD_EIM_D27__UART2_RX_DATA           0x0c0 0x3d4 0x928 0x4 0x1
-#define MX6QDL_PAD_EIM_D27__UART2_TX_DATA           0x0c0 0x3d4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D27__GPIO3_IO27              0x0c0 0x3d4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_SISG3              0x0c0 0x3d4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23       0x0c0 0x3d4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D28__EIM_DATA28              0x0c4 0x3d8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D28__I2C1_SDA                0x0c4 0x3d8 0x89c 0x1 0x0
-#define MX6QDL_PAD_EIM_D28__ECSPI4_MOSI             0x0c4 0x3d8 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D28__IPU2_CSI1_DATA12        0x0c4 0x3d8 0x8b8 0x3 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_CTS_B             0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_RTS_B             0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B         0x0c4 0x3d8 0x924 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__UART2_DTE_RTS_B         0x0c4 0x3d8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D28__GPIO3_IO28              0x0c4 0x3d8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_EXT_TRIG           0x0c4 0x3d8 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_D28__IPU1_DI0_PIN13          0x0c4 0x3d8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D29__EIM_DATA29              0x0c8 0x3dc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI1_PIN15          0x0c8 0x3dc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c8 0x3dc 0x924 0x4 0x1
-#define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
-#define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_D30__EIM_DATA30              0x0cc 0x3e0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21       0x0cc 0x3e0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_DI0_PIN11          0x0cc 0x3e0 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D30__IPU1_CSI0_DATA03        0x0cc 0x3e0 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_CTS_B             0x0cc 0x3e0 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D30__UART3_RTS_B             0x0cc 0x3e0 0x92c 0x4 0x2
-#define MX6QDL_PAD_EIM_D30__GPIO3_IO30              0x0cc 0x3e0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D30__USB_H1_OC               0x0cc 0x3e0 0x948 0x6 0x0
-#define MX6QDL_PAD_EIM_D31__EIM_DATA31              0x0d0 0x3e4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20       0x0d0 0x3e4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_DI0_PIN12          0x0d0 0x3e4 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_D31__IPU1_CSI0_DATA02        0x0d0 0x3e4 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_D31__UART3_RTS_B             0x0d0 0x3e4 0x92c 0x4 0x3
-#define MX6QDL_PAD_EIM_D31__UART3_CTS_B             0x0d0 0x3e4 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D31__GPIO3_IO31              0x0d0 0x3e4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_D31__USB_H1_PWR              0x0d0 0x3e4 0x000 0x6 0x0
-#define MX6QDL_PAD_EIM_A24__EIM_ADDR24              0x0d4 0x3e8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19       0x0d4 0x3e8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A24__IPU2_CSI1_DATA19        0x0d4 0x3e8 0x8d4 0x2 0x1
-#define MX6QDL_PAD_EIM_A24__IPU2_SISG2              0x0d4 0x3e8 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A24__IPU1_SISG2              0x0d4 0x3e8 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A24__GPIO5_IO04              0x0d4 0x3e8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A24__SRC_BOOT_CFG24          0x0d4 0x3e8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A23__EIM_ADDR23              0x0d8 0x3ec 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18       0x0d8 0x3ec 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A23__IPU2_CSI1_DATA18        0x0d8 0x3ec 0x8d0 0x2 0x1
-#define MX6QDL_PAD_EIM_A23__IPU2_SISG3              0x0d8 0x3ec 0x000 0x3 0x0
-#define MX6QDL_PAD_EIM_A23__IPU1_SISG3              0x0d8 0x3ec 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_A23__GPIO6_IO06              0x0d8 0x3ec 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A23__SRC_BOOT_CFG23          0x0d8 0x3ec 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A22__EIM_ADDR22              0x0dc 0x3f0 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17       0x0dc 0x3f0 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A22__IPU2_CSI1_DATA17        0x0dc 0x3f0 0x8cc 0x2 0x1
-#define MX6QDL_PAD_EIM_A22__GPIO2_IO16              0x0dc 0x3f0 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A22__SRC_BOOT_CFG22          0x0dc 0x3f0 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A21__EIM_ADDR21              0x0e0 0x3f4 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16       0x0e0 0x3f4 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A21__IPU2_CSI1_DATA16        0x0e0 0x3f4 0x8c8 0x2 0x1
-#define MX6QDL_PAD_EIM_A21__GPIO2_IO17              0x0e0 0x3f4 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A21__SRC_BOOT_CFG21          0x0e0 0x3f4 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A20__EIM_ADDR20              0x0e4 0x3f8 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15       0x0e4 0x3f8 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A20__IPU2_CSI1_DATA15        0x0e4 0x3f8 0x8c4 0x2 0x1
-#define MX6QDL_PAD_EIM_A20__GPIO2_IO18              0x0e4 0x3f8 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A20__SRC_BOOT_CFG20          0x0e4 0x3f8 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A19__EIM_ADDR19              0x0e8 0x3fc 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14       0x0e8 0x3fc 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A19__IPU2_CSI1_DATA14        0x0e8 0x3fc 0x8c0 0x2 0x1
-#define MX6QDL_PAD_EIM_A19__GPIO2_IO19              0x0e8 0x3fc 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A19__SRC_BOOT_CFG19          0x0e8 0x3fc 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A18__EIM_ADDR18              0x0ec 0x400 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13       0x0ec 0x400 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A18__IPU2_CSI1_DATA13        0x0ec 0x400 0x8bc 0x2 0x1
-#define MX6QDL_PAD_EIM_A18__GPIO2_IO20              0x0ec 0x400 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A18__SRC_BOOT_CFG18          0x0ec 0x400 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A17__EIM_ADDR17              0x0f0 0x404 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12       0x0f0 0x404 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12        0x0f0 0x404 0x8b8 0x2 0x1
-#define MX6QDL_PAD_EIM_A17__GPIO2_IO21              0x0f0 0x404 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A17__SRC_BOOT_CFG17          0x0f0 0x404 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_A16__EIM_ADDR16              0x0f4 0x408 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK       0x0f4 0x408 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK        0x0f4 0x408 0x8e0 0x2 0x1
-#define MX6QDL_PAD_EIM_A16__GPIO2_IO22              0x0f4 0x408 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_A16__SRC_BOOT_CFG16          0x0f4 0x408 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_CS0__EIM_CS0_B               0x0f8 0x40c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS0__IPU1_DI1_PIN05          0x0f8 0x40c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK             0x0f8 0x40c 0x810 0x2 0x0
-#define MX6QDL_PAD_EIM_CS0__GPIO2_IO23              0x0f8 0x40c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_CS1__EIM_CS1_B               0x0fc 0x410 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_CS1__IPU1_DI1_PIN06          0x0fc 0x410 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI             0x0fc 0x410 0x818 0x2 0x0
-#define MX6QDL_PAD_EIM_CS1__GPIO2_IO24              0x0fc 0x410 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_OE__EIM_OE_B                 0x100 0x414 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_OE__IPU1_DI1_PIN07           0x100 0x414 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_OE__ECSPI2_MISO              0x100 0x414 0x814 0x2 0x0
-#define MX6QDL_PAD_EIM_OE__GPIO2_IO25               0x100 0x414 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__EIM_RW                   0x104 0x418 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_RW__IPU1_DI1_PIN08           0x104 0x418 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_RW__ECSPI2_SS0               0x104 0x418 0x81c 0x2 0x0
-#define MX6QDL_PAD_EIM_RW__GPIO2_IO26               0x104 0x418 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_RW__SRC_BOOT_CFG29           0x104 0x418 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_LBA__EIM_LBA_B               0x108 0x41c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_LBA__IPU1_DI1_PIN17          0x108 0x41c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_LBA__ECSPI2_SS1              0x108 0x41c 0x820 0x2 0x0
-#define MX6QDL_PAD_EIM_LBA__GPIO2_IO27              0x108 0x41c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_LBA__SRC_BOOT_CFG26          0x108 0x41c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB0__EIM_EB0_B               0x10c 0x420 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11       0x10c 0x420 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB0__IPU2_CSI1_DATA11        0x10c 0x420 0x8b4 0x2 0x1
-#define MX6QDL_PAD_EIM_EB0__CCM_PMIC_READY          0x10c 0x420 0x7f0 0x4 0x0
-#define MX6QDL_PAD_EIM_EB0__GPIO2_IO28              0x10c 0x420 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB0__SRC_BOOT_CFG27          0x10c 0x420 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_EB1__EIM_EB1_B               0x110 0x424 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10       0x110 0x424 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_EB1__IPU2_CSI1_DATA10        0x110 0x424 0x8b0 0x2 0x1
-#define MX6QDL_PAD_EIM_EB1__GPIO2_IO29              0x110 0x424 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_EB1__SRC_BOOT_CFG28          0x110 0x424 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA0__EIM_AD00                0x114 0x428 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09       0x114 0x428 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA0__IPU2_CSI1_DATA09        0x114 0x428 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA0__GPIO3_IO00              0x114 0x428 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA0__SRC_BOOT_CFG00          0x114 0x428 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA1__EIM_AD01                0x118 0x42c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08       0x118 0x42c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA1__IPU2_CSI1_DATA08        0x118 0x42c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA1__GPIO3_IO01              0x118 0x42c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA1__SRC_BOOT_CFG01          0x118 0x42c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA2__EIM_AD02                0x11c 0x430 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07       0x11c 0x430 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA2__IPU2_CSI1_DATA07        0x11c 0x430 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA2__GPIO3_IO02              0x11c 0x430 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA2__SRC_BOOT_CFG02          0x11c 0x430 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA3__EIM_AD03                0x120 0x434 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06       0x120 0x434 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA3__IPU2_CSI1_DATA06        0x120 0x434 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA3__GPIO3_IO03              0x120 0x434 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA3__SRC_BOOT_CFG03          0x120 0x434 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA4__EIM_AD04                0x124 0x438 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05       0x124 0x438 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA4__IPU2_CSI1_DATA05        0x124 0x438 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA4__GPIO3_IO04              0x124 0x438 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA4__SRC_BOOT_CFG04          0x124 0x438 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA5__EIM_AD05                0x128 0x43c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04       0x128 0x43c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA5__IPU2_CSI1_DATA04        0x128 0x43c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA5__GPIO3_IO05              0x128 0x43c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA5__SRC_BOOT_CFG05          0x128 0x43c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA6__EIM_AD06                0x12c 0x440 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03       0x12c 0x440 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA6__IPU2_CSI1_DATA03        0x12c 0x440 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA6__GPIO3_IO06              0x12c 0x440 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA6__SRC_BOOT_CFG06          0x12c 0x440 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA7__EIM_AD07                0x130 0x444 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02       0x130 0x444 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA7__IPU2_CSI1_DATA02        0x130 0x444 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA7__GPIO3_IO07              0x130 0x444 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA7__SRC_BOOT_CFG07          0x130 0x444 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA8__EIM_AD08                0x134 0x448 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01       0x134 0x448 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA8__IPU2_CSI1_DATA01        0x134 0x448 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA8__GPIO3_IO08              0x134 0x448 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA8__SRC_BOOT_CFG08          0x134 0x448 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA9__EIM_AD09                0x138 0x44c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00       0x138 0x44c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA9__IPU2_CSI1_DATA00        0x138 0x44c 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA9__GPIO3_IO09              0x138 0x44c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA9__SRC_BOOT_CFG09          0x138 0x44c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA10__EIM_AD10               0x13c 0x450 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15         0x13c 0x450 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA10__IPU2_CSI1_DATA_EN      0x13c 0x450 0x8d8 0x2 0x1
-#define MX6QDL_PAD_EIM_DA10__GPIO3_IO10             0x13c 0x450 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA10__SRC_BOOT_CFG10         0x13c 0x450 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA11__EIM_AD11               0x140 0x454 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02         0x140 0x454 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA11__IPU2_CSI1_HSYNC        0x140 0x454 0x8dc 0x2 0x1
-#define MX6QDL_PAD_EIM_DA11__GPIO3_IO11             0x140 0x454 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA11__SRC_BOOT_CFG11         0x140 0x454 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA12__EIM_AD12               0x144 0x458 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03         0x144 0x458 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA12__IPU2_CSI1_VSYNC        0x144 0x458 0x8e4 0x2 0x1
-#define MX6QDL_PAD_EIM_DA12__GPIO3_IO12             0x144 0x458 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA12__SRC_BOOT_CFG12         0x144 0x458 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA13__EIM_AD13               0x148 0x45c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA13__IPU1_DI1_D0_CS         0x148 0x45c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA13__GPIO3_IO13             0x148 0x45c 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA13__SRC_BOOT_CFG13         0x148 0x45c 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA14__EIM_AD14               0x14c 0x460 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA14__IPU1_DI1_D1_CS         0x14c 0x460 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA14__GPIO3_IO14             0x14c 0x460 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA14__SRC_BOOT_CFG14         0x14c 0x460 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_DA15__EIM_AD15               0x150 0x464 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN01         0x150 0x464 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_DA15__IPU1_DI1_PIN04         0x150 0x464 0x000 0x2 0x0
-#define MX6QDL_PAD_EIM_DA15__GPIO3_IO15             0x150 0x464 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_DA15__SRC_BOOT_CFG15         0x150 0x464 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B             0x154 0x468 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_WAIT__EIM_DTACK_B            0x154 0x468 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_WAIT__GPIO5_IO00             0x154 0x468 0x000 0x5 0x0
-#define MX6QDL_PAD_EIM_WAIT__SRC_BOOT_CFG25         0x154 0x468 0x000 0x7 0x0
-#define MX6QDL_PAD_EIM_BCLK__EIM_BCLK               0x158 0x46c 0x000 0x0 0x0
-#define MX6QDL_PAD_EIM_BCLK__IPU1_DI1_PIN16         0x158 0x46c 0x000 0x1 0x0
-#define MX6QDL_PAD_EIM_BCLK__GPIO6_IO31             0x158 0x46c 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK  0x15c 0x470 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK  0x15c 0x470 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16         0x15c 0x470 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15        0x160 0x474 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15        0x160 0x474 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN15__AUD6_TXC              0x160 0x474 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN15__GPIO4_IO17            0x160 0x474 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02         0x164 0x478 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02         0x164 0x478 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN2__AUD6_TXD               0x164 0x478 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN2__GPIO4_IO18             0x164 0x478 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03         0x168 0x47c 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03         0x168 0x47c 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN3__AUD6_TXFS              0x168 0x47c 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN3__GPIO4_IO19             0x168 0x47c 0x000 0x5 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04         0x16c 0x480 0x000 0x0 0x0
-#define MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04         0x16c 0x480 0x000 0x1 0x0
-#define MX6QDL_PAD_DI0_PIN4__AUD6_RXD               0x16c 0x480 0x000 0x2 0x0
-#define MX6QDL_PAD_DI0_PIN4__SD1_WP                 0x16c 0x480 0x94c 0x3 0x0
-#define MX6QDL_PAD_DI0_PIN4__GPIO4_IO20             0x16c 0x480 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00    0x170 0x484 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00    0x170 0x484 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK          0x170 0x484 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21           0x170 0x484 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01    0x174 0x488 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01    0x174 0x488 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI          0x174 0x488 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22           0x174 0x488 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02    0x178 0x48c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02    0x178 0x48c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO          0x178 0x48c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23           0x178 0x48c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03    0x17c 0x490 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03    0x17c 0x490 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT3__ECSPI3_SS0           0x17c 0x490 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24           0x17c 0x490 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04    0x180 0x494 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04    0x180 0x494 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT4__ECSPI3_SS1           0x180 0x494 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25           0x180 0x494 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05    0x184 0x498 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05    0x184 0x498 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT5__ECSPI3_SS2           0x184 0x498 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT5__AUD6_RXFS            0x184 0x498 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26           0x184 0x498 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06    0x188 0x49c 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06    0x188 0x49c 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT6__ECSPI3_SS3           0x188 0x49c 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT6__AUD6_RXC             0x188 0x49c 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27           0x188 0x49c 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07    0x18c 0x4a0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07    0x18c 0x4a0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT7__ECSPI3_RDY           0x18c 0x4a0 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28           0x18c 0x4a0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08    0x190 0x4a4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08    0x190 0x4a4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT8__PWM1_OUT             0x190 0x4a4 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT8__WDOG1_B              0x190 0x4a4 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29           0x190 0x4a4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09    0x194 0x4a8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09    0x194 0x4a8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT9__PWM2_OUT             0x194 0x4a8 0x000 0x2 0x0
-#define MX6QDL_PAD_DISP0_DAT9__WDOG2_B              0x194 0x4a8 0x000 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30           0x194 0x4a8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10   0x198 0x4ac 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10   0x198 0x4ac 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31          0x198 0x4ac 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11   0x19c 0x4b0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11   0x19c 0x4b0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05          0x19c 0x4b0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12   0x1a0 0x4b4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12   0x1a0 0x4b4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06          0x1a0 0x4b4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13   0x1a4 0x4b8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13   0x1a4 0x4b8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS           0x1a4 0x4b8 0x7d8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07          0x1a4 0x4b8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14   0x1a8 0x4bc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14   0x1a8 0x4bc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT14__AUD5_RXC            0x1a8 0x4bc 0x7d4 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08          0x1a8 0x4bc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15   0x1ac 0x4c0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15   0x1ac 0x4c0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI1_SS1          0x1ac 0x4c0 0x804 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT15__ECSPI2_SS1          0x1ac 0x4c0 0x820 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09          0x1ac 0x4c0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16   0x1b0 0x4c4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16   0x1b0 0x4c4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI         0x1b0 0x4c4 0x818 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT16__AUD5_TXC            0x1b0 0x4c4 0x7dc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT16__SDMA_EXT_EVENT0     0x1b0 0x4c4 0x90c 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10          0x1b0 0x4c4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17   0x1b4 0x4c8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17   0x1b4 0x4c8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO         0x1b4 0x4c8 0x814 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT17__AUD5_TXD            0x1b4 0x4c8 0x7d0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT17__SDMA_EXT_EVENT1     0x1b4 0x4c8 0x910 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11          0x1b4 0x4c8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18   0x1b8 0x4cc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18   0x1b8 0x4cc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT18__ECSPI2_SS0          0x1b8 0x4cc 0x81c 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS           0x1b8 0x4cc 0x7e0 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT18__AUD4_RXFS           0x1b8 0x4cc 0x7c0 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12          0x1b8 0x4cc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT18__EIM_CS2_B           0x1b8 0x4cc 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19   0x1bc 0x4d0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19   0x1bc 0x4d0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK         0x1bc 0x4d0 0x810 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT19__AUD5_RXD            0x1bc 0x4d0 0x7cc 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT19__AUD4_RXC            0x1bc 0x4d0 0x7bc 0x4 0x0
-#define MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13          0x1bc 0x4d0 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT19__EIM_CS3_B           0x1bc 0x4d0 0x000 0x7 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20   0x1c0 0x4d4 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20   0x1c0 0x4d4 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT20__ECSPI1_SCLK         0x1c0 0x4d4 0x7f4 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT20__AUD4_TXC            0x1c0 0x4d4 0x7c4 0x3 0x0
-#define MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14          0x1c0 0x4d4 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21   0x1c4 0x4d8 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21   0x1c4 0x4d8 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT21__ECSPI1_MOSI         0x1c4 0x4d8 0x7fc 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT21__AUD4_TXD            0x1c4 0x4d8 0x7b8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15          0x1c4 0x4d8 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22   0x1c8 0x4dc 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22   0x1c8 0x4dc 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT22__ECSPI1_MISO         0x1c8 0x4dc 0x7f8 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS           0x1c8 0x4dc 0x7c8 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16          0x1c8 0x4dc 0x000 0x5 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23   0x1cc 0x4e0 0x000 0x0 0x0
-#define MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23   0x1cc 0x4e0 0x000 0x1 0x0
-#define MX6QDL_PAD_DISP0_DAT23__ECSPI1_SS0          0x1cc 0x4e0 0x800 0x2 0x1
-#define MX6QDL_PAD_DISP0_DAT23__AUD4_RXD            0x1cc 0x4e0 0x7b4 0x3 0x1
-#define MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17          0x1cc 0x4e0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_MDIO             0x1d0 0x4e4 0x840 0x1 0x0
-#define MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK           0x1d0 0x4e4 0x86c 0x2 0x0
-#define MX6QDL_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT  0x1d0 0x4e4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDIO__GPIO1_IO22            0x1d0 0x4e4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDIO__SPDIF_LOCK            0x1d0 0x4e4 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK        0x1d4 0x4e8 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__ESAI_RX_FS         0x1d4 0x4e8 0x85c 0x2 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23         0x1d4 0x4e8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_REF_CLK__SPDIF_SR_CLK       0x1d4 0x4e8 0x000 0x6 0x0
-#define MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID           0x1d8 0x4ec 0x004 0x0 0xff0d0100
-#define MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER           0x1d8 0x4ec 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_RX_ER__ESAI_RX_HF_CLK       0x1d8 0x4ec 0x864 0x2 0x0
-#define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1d8 0x4ec 0x914 0x3 0x1
-#define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1d8 0x4ec 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1d8 0x4ec 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN          0x1dc 0x4f0 0x858 0x1 0x1
-#define MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK         0x1dc 0x4f0 0x870 0x2 0x0
-#define MX6QDL_PAD_ENET_CRS_DV__SPDIF_EXT_CLK       0x1dc 0x4f0 0x918 0x3 0x1
-#define MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25          0x1dc 0x4f0 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD1__MLB_SIG               0x1e0 0x4f4 0x908 0x0 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1         0x1e0 0x4f4 0x84c 0x1 0x1
-#define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
-#define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
-#define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
-#define MX6QDL_PAD_ENET_RXD0__GPIO1_IO27            0x1e4 0x4f8 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN           0x1e8 0x4fc 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2         0x1e8 0x4fc 0x880 0x2 0x0
-#define MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28           0x1e8 0x4fc 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD1__MLB_CLK               0x1ec 0x500 0x900 0x0 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1         0x1ec 0x500 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD1__ESAI_TX2_RX3          0x1ec 0x500 0x87c 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD1__ENET_1588_EVENT0_IN   0x1ec 0x500 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_TXD1__GPIO1_IO29            0x1ec 0x500 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0         0x1f0 0x504 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1          0x1f0 0x504 0x884 0x2 0x0
-#define MX6QDL_PAD_ENET_TXD0__GPIO1_IO30            0x1f0 0x504 0x000 0x5 0x0
-#define MX6QDL_PAD_ENET_MDC__MLB_DATA               0x1f4 0x508 0x904 0x0 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_MDC               0x1f4 0x508 0x000 0x1 0x0
-#define MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0           0x1f4 0x508 0x888 0x2 0x0
-#define MX6QDL_PAD_ENET_MDC__ENET_1588_EVENT1_IN    0x1f4 0x508 0x000 0x4 0x0
-#define MX6QDL_PAD_ENET_MDC__GPIO1_IO31             0x1f4 0x508 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK            0x1f8 0x5c8 0x7f4 0x0 0x2
-#define MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3          0x1f8 0x5c8 0x854 0x1 0x1
-#define MX6QDL_PAD_KEY_COL0__AUD5_TXC               0x1f8 0x5c8 0x7dc 0x2 0x1
-#define MX6QDL_PAD_KEY_COL0__KEY_COL0               0x1f8 0x5c8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_TX_DATA          0x1f8 0x5c8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__UART4_RX_DATA          0x1f8 0x5c8 0x938 0x4 0x0
-#define MX6QDL_PAD_KEY_COL0__GPIO4_IO06             0x1f8 0x5c8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL0__DCIC1_OUT              0x1f8 0x5c8 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI            0x1fc 0x5cc 0x7fc 0x0 0x2
-#define MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3          0x1fc 0x5cc 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW0__AUD5_TXD               0x1fc 0x5cc 0x7d0 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW0__KEY_ROW0               0x1fc 0x5cc 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA          0x1fc 0x5cc 0x938 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA          0x1fc 0x5cc 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW0__GPIO4_IO07             0x1fc 0x5cc 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW0__DCIC2_OUT              0x1fc 0x5cc 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL1__ECSPI1_MISO            0x200 0x5d0 0x7f8 0x0 0x2
-#define MX6QDL_PAD_KEY_COL1__ENET_MDIO              0x200 0x5d0 0x840 0x1 0x1
-#define MX6QDL_PAD_KEY_COL1__AUD5_TXFS              0x200 0x5d0 0x7e0 0x2 0x1
-#define MX6QDL_PAD_KEY_COL1__KEY_COL1               0x200 0x5d0 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_TX_DATA          0x200 0x5d0 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__UART5_RX_DATA          0x200 0x5d0 0x940 0x4 0x0
-#define MX6QDL_PAD_KEY_COL1__GPIO4_IO08             0x200 0x5d0 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL1__SD1_VSELECT            0x200 0x5d0 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0             0x204 0x5d4 0x800 0x0 0x2
-#define MX6QDL_PAD_KEY_ROW1__ENET_COL               0x204 0x5d4 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW1__AUD5_RXD               0x204 0x5d4 0x7cc 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW1__KEY_ROW1               0x204 0x5d4 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA          0x204 0x5d4 0x940 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA          0x204 0x5d4 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW1__GPIO4_IO09             0x204 0x5d4 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW1__SD2_VSELECT            0x204 0x5d4 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL2__ECSPI1_SS1             0x208 0x5d8 0x804 0x0 0x2
-#define MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2          0x208 0x5d8 0x850 0x1 0x1
-#define MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX            0x208 0x5d8 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_COL2__KEY_COL2               0x208 0x5d8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL2__ENET_MDC               0x208 0x5d8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL2__GPIO4_IO10             0x208 0x5d8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL2__USB_H1_PWR_CTL_WAKE    0x208 0x5d8 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_ROW2__ECSPI1_SS2             0x20c 0x5dc 0x808 0x0 0x1
-#define MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2          0x20c 0x5dc 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX            0x20c 0x5dc 0x7e4 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW2__KEY_ROW2               0x20c 0x5dc 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW2__SD2_VSELECT            0x20c 0x5dc 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW2__GPIO4_IO11             0x20c 0x5dc 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE       0x20c 0x5dc 0x88c 0x6 0x1
-#define MX6QDL_PAD_KEY_COL3__ECSPI1_SS3             0x210 0x5e0 0x80c 0x0 0x1
-#define MX6QDL_PAD_KEY_COL3__ENET_CRS               0x210 0x5e0 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL        0x210 0x5e0 0x890 0x2 0x1
-#define MX6QDL_PAD_KEY_COL3__KEY_COL3               0x210 0x5e0 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL3__I2C2_SCL               0x210 0x5e0 0x8a0 0x4 0x1
-#define MX6QDL_PAD_KEY_COL3__GPIO4_IO12             0x210 0x5e0 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_COL3__SPDIF_IN               0x210 0x5e0 0x914 0x6 0x2
-#define MX6QDL_PAD_KEY_ROW3__ASRC_EXT_CLK           0x214 0x5e4 0x7b0 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA        0x214 0x5e4 0x894 0x2 0x1
-#define MX6QDL_PAD_KEY_ROW3__KEY_ROW3               0x214 0x5e4 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW3__I2C2_SDA               0x214 0x5e4 0x8a4 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW3__GPIO4_IO13             0x214 0x5e4 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW3__SD1_VSELECT            0x214 0x5e4 0x000 0x6 0x0
-#define MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX            0x218 0x5e8 0x000 0x0 0x0
-#define MX6QDL_PAD_KEY_COL4__IPU1_SISG4             0x218 0x5e8 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_COL4__USB_OTG_OC             0x218 0x5e8 0x944 0x2 0x1
-#define MX6QDL_PAD_KEY_COL4__KEY_COL4               0x218 0x5e8 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_RTS_B            0x218 0x5e8 0x93c 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__UART5_CTS_B            0x218 0x5e8 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_COL4__GPIO4_IO14             0x218 0x5e8 0x000 0x5 0x0
-#define MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX            0x21c 0x5ec 0x7e8 0x0 0x0
-#define MX6QDL_PAD_KEY_ROW4__IPU1_SISG5             0x21c 0x5ec 0x000 0x1 0x0
-#define MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR            0x21c 0x5ec 0x000 0x2 0x0
-#define MX6QDL_PAD_KEY_ROW4__KEY_ROW4               0x21c 0x5ec 0x000 0x3 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_CTS_B            0x21c 0x5ec 0x000 0x4 0x0
-#define MX6QDL_PAD_KEY_ROW4__UART5_RTS_B            0x21c 0x5ec 0x93c 0x4 0x1
-#define MX6QDL_PAD_KEY_ROW4__GPIO4_IO15             0x21c 0x5ec 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__CCM_CLKO1                0x220 0x5f0 0x000 0x0 0x0
-#define MX6QDL_PAD_GPIO_0__KEY_COL5                 0x220 0x5f0 0x8e8 0x2 0x0
-#define MX6QDL_PAD_GPIO_0__ASRC_EXT_CLK             0x220 0x5f0 0x7b0 0x3 0x1
-#define MX6QDL_PAD_GPIO_0__EPIT1_OUT                0x220 0x5f0 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_0__GPIO1_IO00               0x220 0x5f0 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_0__USB_H1_PWR               0x220 0x5f0 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_0__SNVS_VIO_5               0x220 0x5f0 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_1__ESAI_RX_CLK              0x224 0x5f4 0x86c 0x0 0x1
-#define MX6QDL_PAD_GPIO_1__WDOG2_B                  0x224 0x5f4 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_1__KEY_ROW5                 0x224 0x5f4 0x8f4 0x2 0x0
-#define MX6QDL_PAD_GPIO_1__USB_OTG_ID               0x224 0x5f4 0x004 0x3 0xff0d0101
-#define MX6QDL_PAD_GPIO_1__PWM2_OUT                 0x224 0x5f4 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_1__GPIO1_IO01               0x224 0x5f4 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_1__SD1_CD_B                 0x224 0x5f4 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_9__ESAI_RX_FS               0x228 0x5f8 0x85c 0x0 0x1
-#define MX6QDL_PAD_GPIO_9__WDOG1_B                  0x228 0x5f8 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_9__KEY_COL6                 0x228 0x5f8 0x8ec 0x2 0x0
-#define MX6QDL_PAD_GPIO_9__CCM_REF_EN_B             0x228 0x5f8 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_9__PWM1_OUT                 0x228 0x5f8 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_9__GPIO1_IO09               0x228 0x5f8 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_9__SD1_WP                   0x228 0x5f8 0x94c 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__ESAI_RX_HF_CLK           0x22c 0x5fc 0x864 0x0 0x1
-#define MX6QDL_PAD_GPIO_3__I2C3_SCL                 0x22c 0x5fc 0x8a8 0x2 0x1
-#define MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M      0x22c 0x5fc 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_3__CCM_CLKO2                0x22c 0x5fc 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_3__GPIO1_IO03               0x22c 0x5fc 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_3__USB_H1_OC                0x22c 0x5fc 0x948 0x6 0x1
-#define MX6QDL_PAD_GPIO_3__MLB_CLK                  0x22c 0x5fc 0x900 0x7 0x1
-#define MX6QDL_PAD_GPIO_6__ESAI_TX_CLK              0x230 0x600 0x870 0x0 0x1
-#define MX6QDL_PAD_GPIO_6__ENET_IRQ		    0x230 0x600 0x03c 0x11 0xff000609
-#define MX6QDL_PAD_GPIO_6__I2C3_SDA                 0x230 0x600 0x8ac 0x2 0x1
-#define MX6QDL_PAD_GPIO_6__GPIO1_IO06               0x230 0x600 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_6__SD2_LCTL                 0x230 0x600 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_6__MLB_SIG                  0x230 0x600 0x908 0x7 0x1
-#define MX6QDL_PAD_GPIO_2__ESAI_TX_FS               0x234 0x604 0x860 0x0 0x1
-#define MX6QDL_PAD_GPIO_2__KEY_ROW6                 0x234 0x604 0x8f8 0x2 0x1
-#define MX6QDL_PAD_GPIO_2__GPIO1_IO02               0x234 0x604 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_2__SD2_WP                   0x234 0x604 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_2__MLB_DATA                 0x234 0x604 0x904 0x7 0x1
-#define MX6QDL_PAD_GPIO_4__ESAI_TX_HF_CLK           0x238 0x608 0x868 0x0 0x1
-#define MX6QDL_PAD_GPIO_4__KEY_COL7                 0x238 0x608 0x8f0 0x2 0x1
-#define MX6QDL_PAD_GPIO_4__GPIO1_IO04               0x238 0x608 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_4__SD2_CD_B                 0x238 0x608 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3             0x23c 0x60c 0x87c 0x0 0x1
-#define MX6QDL_PAD_GPIO_5__KEY_ROW7                 0x23c 0x60c 0x8fc 0x2 0x1
-#define MX6QDL_PAD_GPIO_5__CCM_CLKO1                0x23c 0x60c 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_5__GPIO1_IO05               0x23c 0x60c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_5__I2C3_SCL                 0x23c 0x60c 0x8a8 0x6 0x2
-#define MX6QDL_PAD_GPIO_5__ARM_EVENTI               0x23c 0x60c 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_7__ESAI_TX4_RX1             0x240 0x610 0x884 0x0 0x1
-#define MX6QDL_PAD_GPIO_7__ECSPI5_RDY               0x240 0x610 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_7__EPIT1_OUT                0x240 0x610 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_7__FLEXCAN1_TX              0x240 0x610 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_TX_DATA            0x240 0x610 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_7__UART2_RX_DATA            0x240 0x610 0x928 0x4 0x2
-#define MX6QDL_PAD_GPIO_7__GPIO1_IO07               0x240 0x610 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_7__SPDIF_LOCK               0x240 0x610 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_7__USB_OTG_HOST_MODE        0x240 0x610 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_8__ESAI_TX5_RX0             0x244 0x614 0x888 0x0 0x1
-#define MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K      0x244 0x614 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_8__EPIT2_OUT                0x244 0x614 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_8__FLEXCAN1_RX              0x244 0x614 0x7e4 0x3 0x1
-#define MX6QDL_PAD_GPIO_8__UART2_RX_DATA            0x244 0x614 0x928 0x4 0x3
-#define MX6QDL_PAD_GPIO_8__UART2_TX_DATA            0x244 0x614 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_8__GPIO1_IO08               0x244 0x614 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_8__SPDIF_SR_CLK             0x244 0x614 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_8__USB_OTG_PWR_CTL_WAKE     0x244 0x614 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_16__ESAI_TX3_RX2            0x248 0x618 0x880 0x0 0x1
-#define MX6QDL_PAD_GPIO_16__ENET_1588_EVENT2_IN     0x248 0x618 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_16__ENET_REF_CLK            0x248 0x618 0x83c 0x2 0x1
-#define MX6QDL_PAD_GPIO_16__SD1_LCTL                0x248 0x618 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_16__SPDIF_IN                0x248 0x618 0x914 0x4 0x3
-#define MX6QDL_PAD_GPIO_16__GPIO7_IO11              0x248 0x618 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_16__I2C3_SDA                0x248 0x618 0x8ac 0x6 0x2
-#define MX6QDL_PAD_GPIO_16__JTAG_DE_B               0x248 0x618 0x000 0x7 0x0
-#define MX6QDL_PAD_GPIO_17__ESAI_TX0                0x24c 0x61c 0x874 0x0 0x0
-#define MX6QDL_PAD_GPIO_17__ENET_1588_EVENT3_IN     0x24c 0x61c 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_17__CCM_PMIC_READY          0x24c 0x61c 0x7f0 0x2 0x1
-#define MX6QDL_PAD_GPIO_17__SDMA_EXT_EVENT0         0x24c 0x61c 0x90c 0x3 0x1
-#define MX6QDL_PAD_GPIO_17__SPDIF_OUT               0x24c 0x61c 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_17__GPIO7_IO12              0x24c 0x61c 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__ESAI_TX1                0x250 0x620 0x878 0x0 0x0
-#define MX6QDL_PAD_GPIO_18__ENET_RX_CLK             0x250 0x620 0x844 0x1 0x1
-#define MX6QDL_PAD_GPIO_18__SD3_VSELECT             0x250 0x620 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_18__SDMA_EXT_EVENT1         0x250 0x620 0x910 0x3 0x1
-#define MX6QDL_PAD_GPIO_18__ASRC_EXT_CLK            0x250 0x620 0x7b0 0x4 0x2
-#define MX6QDL_PAD_GPIO_18__GPIO7_IO13              0x250 0x620 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_18__SNVS_VIO_5_CTL          0x250 0x620 0x000 0x6 0x0
-#define MX6QDL_PAD_GPIO_19__KEY_COL5                0x254 0x624 0x8e8 0x0 0x1
-#define MX6QDL_PAD_GPIO_19__ENET_1588_EVENT0_OUT    0x254 0x624 0x000 0x1 0x0
-#define MX6QDL_PAD_GPIO_19__SPDIF_OUT               0x254 0x624 0x000 0x2 0x0
-#define MX6QDL_PAD_GPIO_19__CCM_CLKO1               0x254 0x624 0x000 0x3 0x0
-#define MX6QDL_PAD_GPIO_19__ECSPI1_RDY              0x254 0x624 0x000 0x4 0x0
-#define MX6QDL_PAD_GPIO_19__GPIO4_IO05              0x254 0x624 0x000 0x5 0x0
-#define MX6QDL_PAD_GPIO_19__ENET_TX_ER              0x254 0x624 0x000 0x6 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK    0x258 0x628 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18          0x258 0x628 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO          0x258 0x628 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC       0x25c 0x62c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1             0x25c 0x62c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19            0x25c 0x62c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL         0x25c 0x62c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN  0x260 0x630 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00         0x260 0x630 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20         0x260 0x630 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK      0x260 0x630 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC      0x264 0x634 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01           0x264 0x634 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21           0x264 0x634 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00          0x264 0x634 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04      0x268 0x638 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT4__EIM_DATA02            0x268 0x638 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK           0x268 0x638 0x7f4 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT4__KEY_COL5              0x268 0x638 0x8e8 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT4__AUD3_TXC              0x268 0x638 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22            0x268 0x638 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01           0x268 0x638 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05      0x26c 0x63c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT5__EIM_DATA03            0x26c 0x63c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI           0x26c 0x63c 0x7fc 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT5__KEY_ROW5              0x26c 0x63c 0x8f4 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT5__AUD3_TXD              0x26c 0x63c 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23            0x26c 0x63c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02           0x26c 0x63c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06      0x270 0x640 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT6__EIM_DATA04            0x270 0x640 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO           0x270 0x640 0x7f8 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT6__KEY_COL6              0x270 0x640 0x8ec 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS             0x270 0x640 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24            0x270 0x640 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03           0x270 0x640 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07      0x274 0x644 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT7__EIM_DATA05            0x274 0x644 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ECSPI1_SS0            0x274 0x644 0x800 0x2 0x3
-#define MX6QDL_PAD_CSI0_DAT7__KEY_ROW6              0x274 0x644 0x8f8 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT7__AUD3_RXD              0x274 0x644 0x000 0x4 0x0
-#define MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25            0x274 0x644 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04           0x274 0x644 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08      0x278 0x648 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT8__EIM_DATA06            0x278 0x648 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK           0x278 0x648 0x810 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT8__KEY_COL7              0x278 0x648 0x8f0 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT8__I2C1_SDA              0x278 0x648 0x89c 0x4 0x1
-#define MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26            0x278 0x648 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05           0x278 0x648 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09      0x27c 0x64c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT9__EIM_DATA07            0x27c 0x64c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI           0x27c 0x64c 0x818 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT9__KEY_ROW7              0x27c 0x64c 0x8fc 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT9__I2C1_SCL              0x27c 0x64c 0x898 0x4 0x1
-#define MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27            0x27c 0x64c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06           0x27c 0x64c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10     0x280 0x650 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC             0x280 0x650 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO          0x280 0x650 0x814 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA        0x280 0x650 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA        0x280 0x650 0x920 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28           0x280 0x650 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07          0x280 0x650 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11     0x284 0x654 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS            0x284 0x654 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0           0x284 0x654 0x81c 0x2 0x2
-#define MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA        0x284 0x654 0x920 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA        0x284 0x654 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29           0x284 0x654 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08          0x284 0x654 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12     0x288 0x658 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT12__EIM_DATA08           0x288 0x658 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA        0x288 0x658 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT12__UART4_RX_DATA        0x288 0x658 0x938 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30           0x288 0x658 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09          0x288 0x658 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13     0x28c 0x65c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT13__EIM_DATA09           0x28c 0x65c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA        0x28c 0x65c 0x938 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT13__UART4_TX_DATA        0x28c 0x65c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31           0x28c 0x65c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10          0x28c 0x65c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14     0x290 0x660 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT14__EIM_DATA10           0x290 0x660 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA        0x290 0x660 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT14__UART5_RX_DATA        0x290 0x660 0x940 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00           0x290 0x660 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11          0x290 0x660 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15     0x294 0x664 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT15__EIM_DATA11           0x294 0x664 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA        0x294 0x664 0x940 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT15__UART5_TX_DATA        0x294 0x664 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01           0x294 0x664 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12          0x294 0x664 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16     0x298 0x668 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT16__EIM_DATA12           0x298 0x668 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B          0x298 0x668 0x934 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B          0x298 0x668 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02           0x298 0x668 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13          0x298 0x668 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17     0x29c 0x66c 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT17__EIM_DATA13           0x29c 0x66c 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B          0x29c 0x66c 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT17__UART4_RTS_B          0x29c 0x66c 0x934 0x3 0x1
-#define MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03           0x29c 0x66c 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14          0x29c 0x66c 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18     0x2a0 0x670 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT18__EIM_DATA14           0x2a0 0x670 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B          0x2a0 0x670 0x93c 0x3 0x2
-#define MX6QDL_PAD_CSI0_DAT18__UART5_CTS_B          0x2a0 0x670 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04           0x2a0 0x670 0x000 0x5 0x0
-#define MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15          0x2a0 0x670 0x000 0x7 0x0
-#define MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19     0x2a4 0x674 0x000 0x0 0x0
-#define MX6QDL_PAD_CSI0_DAT19__EIM_DATA15           0x2a4 0x674 0x000 0x1 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B          0x2a4 0x674 0x000 0x3 0x0
-#define MX6QDL_PAD_CSI0_DAT19__UART5_RTS_B          0x2a4 0x674 0x93c 0x3 0x3
-#define MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05           0x2a4 0x674 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT7__SD3_DATA7              0x2a8 0x690 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA          0x2a8 0x690 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT7__UART1_RX_DATA          0x2a8 0x690 0x920 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT7__GPIO6_IO17             0x2a8 0x690 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT6__SD3_DATA6              0x2ac 0x694 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA          0x2ac 0x694 0x920 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT6__UART1_TX_DATA          0x2ac 0x694 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT6__GPIO6_IO18             0x2ac 0x694 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT5__SD3_DATA5              0x2b0 0x698 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA          0x2b0 0x698 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT5__UART2_RX_DATA          0x2b0 0x698 0x928 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT5__GPIO7_IO00             0x2b0 0x698 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT4__SD3_DATA4              0x2b4 0x69c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA          0x2b4 0x69c 0x928 0x1 0x5
-#define MX6QDL_PAD_SD3_DAT4__UART2_TX_DATA          0x2b4 0x69c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT4__GPIO7_IO01             0x2b4 0x69c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CMD__SD3_CMD                 0x2b8 0x6a0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_CTS_B             0x2b8 0x6a0 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CMD__UART2_RTS_B             0x2b8 0x6a0 0x924 0x1 0x2
-#define MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX             0x2b8 0x6a0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_CMD__GPIO7_IO02              0x2b8 0x6a0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_CLK__SD3_CLK                 0x2bc 0x6a4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_CLK__UART2_RTS_B             0x2bc 0x6a4 0x924 0x1 0x3
-#define MX6QDL_PAD_SD3_CLK__UART2_CTS_B             0x2bc 0x6a4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX             0x2bc 0x6a4 0x7e4 0x2 0x2
-#define MX6QDL_PAD_SD3_CLK__GPIO7_IO03              0x2bc 0x6a4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT0__SD3_DATA0              0x2c0 0x6a8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_CTS_B            0x2c0 0x6a8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT0__UART1_RTS_B            0x2c0 0x6a8 0x91c 0x1 0x2
-#define MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX            0x2c0 0x6a8 0x000 0x2 0x0
-#define MX6QDL_PAD_SD3_DAT0__GPIO7_IO04             0x2c0 0x6a8 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT1__SD3_DATA1              0x2c4 0x6ac 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT1__UART1_RTS_B            0x2c4 0x6ac 0x91c 0x1 0x3
-#define MX6QDL_PAD_SD3_DAT1__UART1_CTS_B            0x2c4 0x6ac 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX            0x2c4 0x6ac 0x7e8 0x2 0x1
-#define MX6QDL_PAD_SD3_DAT1__GPIO7_IO05             0x2c4 0x6ac 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT2__SD3_DATA2              0x2c8 0x6b0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT2__GPIO7_IO06             0x2c8 0x6b0 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_DAT3__SD3_DATA3              0x2cc 0x6b4 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_CTS_B            0x2cc 0x6b4 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_DAT3__UART3_RTS_B            0x2cc 0x6b4 0x92c 0x1 0x4
-#define MX6QDL_PAD_SD3_DAT3__GPIO7_IO07             0x2cc 0x6b4 0x000 0x5 0x0
-#define MX6QDL_PAD_SD3_RST__SD3_RESET               0x2d0 0x6b8 0x000 0x0 0x0
-#define MX6QDL_PAD_SD3_RST__UART3_RTS_B             0x2d0 0x6b8 0x92c 0x1 0x5
-#define MX6QDL_PAD_SD3_RST__UART3_CTS_B             0x2d0 0x6b8 0x000 0x1 0x0
-#define MX6QDL_PAD_SD3_RST__GPIO7_IO08              0x2d0 0x6b8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CLE__NAND_CLE              0x2d4 0x6bc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CLE__IPU2_SISG4            0x2d4 0x6bc 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CLE__GPIO6_IO07            0x2d4 0x6bc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_ALE__NAND_ALE              0x2d8 0x6c0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_ALE__SD4_RESET             0x2d8 0x6c0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_ALE__GPIO6_IO08            0x2d8 0x6c0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_WP_B__NAND_WP_B            0x2dc 0x6c4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_WP_B__IPU2_SISG5           0x2dc 0x6c4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09           0x2dc 0x6c4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_RB0__NAND_READY_B          0x2e0 0x6c8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_RB0__IPU2_DI0_PIN01        0x2e0 0x6c8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_RB0__GPIO6_IO10            0x2e0 0x6c8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS0__NAND_CE0_B            0x2e4 0x6cc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS0__GPIO6_IO11            0x2e4 0x6cc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS1__NAND_CE1_B            0x2e8 0x6d0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD4_VSELECT           0x2e8 0x6d0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS1__SD3_VSELECT           0x2e8 0x6d0 0x000 0x2 0x0
-#define MX6QDL_PAD_NANDF_CS1__GPIO6_IO14            0x2e8 0x6d0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__NAND_CE2_B            0x2ec 0x6d4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU1_SISG0            0x2ec 0x6d4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS2__ESAI_TX0              0x2ec 0x6d4 0x874 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS2__EIM_CRE               0x2ec 0x6d4 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS2__CCM_CLKO2             0x2ec 0x6d4 0x000 0x4 0x0
-#define MX6QDL_PAD_NANDF_CS2__GPIO6_IO15            0x2ec 0x6d4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS2__IPU2_SISG0            0x2ec 0x6d4 0x000 0x6 0x0
-#define MX6QDL_PAD_NANDF_CS3__NAND_CE3_B            0x2f0 0x6d8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU1_SISG1            0x2f0 0x6d8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_CS3__ESAI_TX1              0x2f0 0x6d8 0x878 0x2 0x1
-#define MX6QDL_PAD_NANDF_CS3__EIM_ADDR26            0x2f0 0x6d8 0x000 0x3 0x0
-#define MX6QDL_PAD_NANDF_CS3__GPIO6_IO16            0x2f0 0x6d8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_CS3__IPU2_SISG1            0x2f0 0x6d8 0x000 0x6 0x0
-#define MX6QDL_PAD_SD4_CMD__SD4_CMD                 0x2f4 0x6dc 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CMD__NAND_RE_B               0x2f4 0x6dc 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_TX_DATA           0x2f4 0x6dc 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CMD__UART3_RX_DATA           0x2f4 0x6dc 0x930 0x2 0x2
-#define MX6QDL_PAD_SD4_CMD__GPIO7_IO09              0x2f4 0x6dc 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_CLK__SD4_CLK                 0x2f8 0x6e0 0x000 0x0 0x0
-#define MX6QDL_PAD_SD4_CLK__NAND_WE_B               0x2f8 0x6e0 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_CLK__UART3_RX_DATA           0x2f8 0x6e0 0x930 0x2 0x3
-#define MX6QDL_PAD_SD4_CLK__UART3_TX_DATA           0x2f8 0x6e0 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_CLK__GPIO7_IO10              0x2f8 0x6e0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D0__NAND_DATA00            0x2fc 0x6e4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D0__SD1_DATA4              0x2fc 0x6e4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D0__GPIO2_IO00             0x2fc 0x6e4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D1__NAND_DATA01            0x300 0x6e8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D1__SD1_DATA5              0x300 0x6e8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D1__GPIO2_IO01             0x300 0x6e8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D2__NAND_DATA02            0x304 0x6ec 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D2__SD1_DATA6              0x304 0x6ec 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D2__GPIO2_IO02             0x304 0x6ec 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D3__NAND_DATA03            0x308 0x6f0 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D3__SD1_DATA7              0x308 0x6f0 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D3__GPIO2_IO03             0x308 0x6f0 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D4__NAND_DATA04            0x30c 0x6f4 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D4__SD2_DATA4              0x30c 0x6f4 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D4__GPIO2_IO04             0x30c 0x6f4 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D5__NAND_DATA05            0x310 0x6f8 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D5__SD2_DATA5              0x310 0x6f8 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D5__GPIO2_IO05             0x310 0x6f8 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D6__NAND_DATA06            0x314 0x6fc 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D6__SD2_DATA6              0x314 0x6fc 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D6__GPIO2_IO06             0x314 0x6fc 0x000 0x5 0x0
-#define MX6QDL_PAD_NANDF_D7__NAND_DATA07            0x318 0x700 0x000 0x0 0x0
-#define MX6QDL_PAD_NANDF_D7__SD2_DATA7              0x318 0x700 0x000 0x1 0x0
-#define MX6QDL_PAD_NANDF_D7__GPIO2_IO07             0x318 0x700 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT0__SD4_DATA0              0x31c 0x704 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT0__NAND_DQS               0x31c 0x704 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT0__GPIO2_IO08             0x31c 0x704 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT1__SD4_DATA1              0x320 0x708 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT1__PWM3_OUT               0x320 0x708 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT1__GPIO2_IO09             0x320 0x708 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT2__SD4_DATA2              0x324 0x70c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT2__PWM4_OUT               0x324 0x70c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT2__GPIO2_IO10             0x324 0x70c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT3__SD4_DATA3              0x328 0x710 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT3__GPIO2_IO11             0x328 0x710 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT4__SD4_DATA4              0x32c 0x714 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA          0x32c 0x714 0x928 0x2 0x6
-#define MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA          0x32c 0x714 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT4__GPIO2_IO12             0x32c 0x714 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT5__SD4_DATA5              0x330 0x718 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT5__UART2_RTS_B            0x330 0x718 0x924 0x2 0x4
-#define MX6QDL_PAD_SD4_DAT5__UART2_CTS_B            0x330 0x718 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT5__GPIO2_IO13             0x330 0x718 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT6__SD4_DATA6              0x334 0x71c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_CTS_B            0x334 0x71c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT6__UART2_RTS_B            0x334 0x71c 0x924 0x2 0x5
-#define MX6QDL_PAD_SD4_DAT6__GPIO2_IO14             0x334 0x71c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD4_DAT7__SD4_DATA7              0x338 0x720 0x000 0x1 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA          0x338 0x720 0x000 0x2 0x0
-#define MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA          0x338 0x720 0x928 0x2 0x7
-#define MX6QDL_PAD_SD4_DAT7__GPIO2_IO15             0x338 0x720 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT1__SD1_DATA1              0x33c 0x724 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT1__ECSPI5_SS0             0x33c 0x724 0x834 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT1__PWM3_OUT               0x33c 0x724 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2           0x33c 0x724 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT1__GPIO1_IO17             0x33c 0x724 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT0__SD1_DATA0              0x340 0x728 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO            0x340 0x728 0x82c 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1           0x340 0x728 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT0__GPIO1_IO16             0x340 0x728 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__SD1_DATA3              0x344 0x72c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT3__ECSPI5_SS2             0x344 0x72c 0x000 0x1 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPT_COMPARE3           0x344 0x72c 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT3__PWM1_OUT               0x344 0x72c 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_B                0x344 0x72c 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT3__GPIO1_IO21             0x344 0x72c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT3__WDOG2_RESET_B_DEB      0x344 0x72c 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_CMD__SD1_CMD                 0x348 0x730 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI             0x348 0x730 0x830 0x1 0x0
-#define MX6QDL_PAD_SD1_CMD__PWM4_OUT                0x348 0x730 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CMD__GPT_COMPARE1            0x348 0x730 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CMD__GPIO1_IO18              0x348 0x730 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__SD1_DATA2              0x34c 0x734 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_DAT2__ECSPI5_SS1             0x34c 0x734 0x838 0x1 0x1
-#define MX6QDL_PAD_SD1_DAT2__GPT_COMPARE2           0x34c 0x734 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_DAT2__PWM2_OUT               0x34c 0x734 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_B                0x34c 0x734 0x000 0x4 0x0
-#define MX6QDL_PAD_SD1_DAT2__GPIO1_IO19             0x34c 0x734 0x000 0x5 0x0
-#define MX6QDL_PAD_SD1_DAT2__WDOG1_RESET_B_DEB      0x34c 0x734 0x000 0x6 0x0
-#define MX6QDL_PAD_SD1_CLK__SD1_CLK                 0x350 0x738 0x000 0x0 0x0
-#define MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK             0x350 0x738 0x828 0x1 0x0
-#define MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT          0x350 0x738 0x000 0x2 0x0
-#define MX6QDL_PAD_SD1_CLK__GPT_CLKIN               0x350 0x738 0x000 0x3 0x0
-#define MX6QDL_PAD_SD1_CLK__GPIO1_IO20              0x350 0x738 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CLK__SD2_CLK                 0x354 0x73c 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK             0x354 0x73c 0x828 0x1 0x1
-#define MX6QDL_PAD_SD2_CLK__KEY_COL5                0x354 0x73c 0x8e8 0x2 0x3
-#define MX6QDL_PAD_SD2_CLK__AUD4_RXFS               0x354 0x73c 0x7c0 0x3 0x1
-#define MX6QDL_PAD_SD2_CLK__GPIO1_IO10              0x354 0x73c 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_CMD__SD2_CMD                 0x358 0x740 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI             0x358 0x740 0x830 0x1 0x1
-#define MX6QDL_PAD_SD2_CMD__KEY_ROW5                0x358 0x740 0x8f4 0x2 0x2
-#define MX6QDL_PAD_SD2_CMD__AUD4_RXC                0x358 0x740 0x7bc 0x3 0x1
-#define MX6QDL_PAD_SD2_CMD__GPIO1_IO11              0x358 0x740 0x000 0x5 0x0
-#define MX6QDL_PAD_SD2_DAT3__SD2_DATA3              0x35c 0x744 0x000 0x0 0x0
-#define MX6QDL_PAD_SD2_DAT3__ECSPI5_SS3             0x35c 0x744 0x000 0x1 0x0
-#define MX6QDL_PAD_SD2_DAT3__KEY_COL6               0x35c 0x744 0x8ec 0x2 0x2
-#define MX6QDL_PAD_SD2_DAT3__AUD4_TXC               0x35c 0x744 0x7c4 0x3 0x1
-#define MX6QDL_PAD_SD2_DAT3__GPIO1_IO12             0x35c 0x744 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6Q_PINFUNC_H */
diff --git a/src/arm/imx6qdl-microsom-ar8035.dtsi b/src/arm/imx6qdl-microsom-ar8035.dtsi
deleted file mode 100644
index d16066608e21..000000000000
--- a/src/arm/imx6qdl-microsom-ar8035.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This describes the hookup for an AR8035 to the iMX6 on the SolidRun
- * MicroSOM.
- */
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-mode = "rgmii";
-	phy-reset-duration = <2>;
-	phy-reset-gpios = <&gpio4 15 0>;
-	status = "okay";
-};
-
-&iomuxc {
-	enet {
-		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				/* AR8035 reset */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
-				/* AR8035 interrupt */
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x80000000
-				/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
-				/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
-				/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-				/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-
-				/*
-				 * As the RMII pins are also connected to RGMII
-				 * so that an AR8030 can be placed, set these
-				 * to high-z with the same pulls as above.
-				 * Use the GPIO settings to avoid changing the
-				 * input select registers.
-				 */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
-			>;
-		};
-	};
-};
diff --git a/src/arm/imx6qdl-microsom.dtsi b/src/arm/imx6qdl-microsom.dtsi
deleted file mode 100644
index 79eac6849d4c..000000000000
--- a/src/arm/imx6qdl-microsom.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- */
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_uart1: microsom-uart1 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_uart1>;
-	status = "okay";
-};
diff --git a/src/arm/imx6qdl-phytec-pbab01.dtsi b/src/arm/imx6qdl-phytec-pbab01.dtsi
deleted file mode 100644
index 584721264121..000000000000
--- a/src/arm/imx6qdl-phytec-pbab01.dtsi
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/ {
-	chosen {
-		linux,stdout-path = &uart4;
-	};
-};
-
-&fec {
-	status = "okay";
-};
-
-&gpmi {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	tlv320@18 {
-		compatible = "ti,tlv320aic3x";
-		reg = <0x18>;
-	};
-
-	stmpe@41 {
-		compatible = "st,stmpe811";
-		reg = <0x41>;
-	};
-
-	rtc@51 {
-		compatible = "nxp,rtc8564";
-		reg = <0x51>;
-	};
-
-	adc@64 {
-		compatible = "maxim,max1037";
-		reg = <0x64>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-&usdhc2 {
-	status = "okay";
-};
-
-&usdhc3 {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
-		>;
-	};
-};
diff --git a/src/arm/imx6sl-pinfunc.h b/src/arm/imx6sl-pinfunc.h
deleted file mode 100644
index 77b17bcc7b70..000000000000
--- a/src/arm/imx6sl-pinfunc.h
+++ /dev/null
@@ -1,1077 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX6SL_PINFUNC_H
-#define __DTS_IMX6SL_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT          0x04c 0x2a4 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_MCLK__PWM4_OUT               0x04c 0x2a4 0x000 0x1 0x0
-#define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY             0x04c 0x2a4 0x6b4 0x2 0x0
-#define MX6SL_PAD_AUD_MCLK__FEC_MDC                0x04c 0x2a4 0x000 0x3 0x0
-#define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB      0x04c 0x2a4 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_MCLK__GPIO1_IO06             0x04c 0x2a4 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK          0x04c 0x2a4 0x7f4 0x6 0x0
-#define MX6SL_PAD_AUD_RXC__AUD3_RXC                0x050 0x2a8 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_RXC__I2C1_SDA                0x050 0x2a8 0x720 0x1 0x0
-#define MX6SL_PAD_AUD_RXC__UART3_TX_DATA           0x050 0x2a8 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_RXC__UART3_RX_DATA           0x050 0x2a8 0x80c 0x2 0x0
-#define MX6SL_PAD_AUD_RXC__FEC_TX_CLK              0x050 0x2a8 0x70c 0x3 0x0
-#define MX6SL_PAD_AUD_RXC__I2C3_SDA                0x050 0x2a8 0x730 0x4 0x0
-#define MX6SL_PAD_AUD_RXC__GPIO1_IO01              0x050 0x2a8 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_RXC__ECSPI3_SS1              0x050 0x2a8 0x6c4 0x6 0x0
-#define MX6SL_PAD_AUD_RXD__AUD3_RXD                0x054 0x2ac 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_RXD__ECSPI3_MOSI             0x054 0x2ac 0x6bc 0x1 0x0
-#define MX6SL_PAD_AUD_RXD__UART4_RX_DATA           0x054 0x2ac 0x814 0x2 0x0
-#define MX6SL_PAD_AUD_RXD__UART4_TX_DATA           0x054 0x2ac 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_RXD__FEC_RX_ER               0x054 0x2ac 0x708 0x3 0x0
-#define MX6SL_PAD_AUD_RXD__SD1_LCTL                0x054 0x2ac 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_RXD__GPIO1_IO02              0x054 0x2ac 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_RXFS__AUD3_RXFS              0x058 0x2b0 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_RXFS__I2C1_SCL               0x058 0x2b0 0x71c 0x1 0x0
-#define MX6SL_PAD_AUD_RXFS__UART3_RX_DATA          0x058 0x2b0 0x80c 0x2 0x1
-#define MX6SL_PAD_AUD_RXFS__UART3_TX_DATA          0x058 0x2b0 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_RXFS__FEC_MDIO               0x058 0x2b0 0x6f4 0x3 0x0
-#define MX6SL_PAD_AUD_RXFS__I2C3_SCL               0x058 0x2b0 0x72c 0x4 0x0
-#define MX6SL_PAD_AUD_RXFS__GPIO1_IO00             0x058 0x2b0 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_RXFS__ECSPI3_SS0             0x058 0x2b0 0x6c0 0x6 0x0
-#define MX6SL_PAD_AUD_TXC__AUD3_TXC                0x05c 0x2b4 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_TXC__ECSPI3_MISO             0x05c 0x2b4 0x6b8 0x1 0x0
-#define MX6SL_PAD_AUD_TXC__UART4_TX_DATA           0x05c 0x2b4 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_TXC__UART4_RX_DATA           0x05c 0x2b4 0x814 0x2 0x1
-#define MX6SL_PAD_AUD_TXC__FEC_RX_DV               0x05c 0x2b4 0x704 0x3 0x0
-#define MX6SL_PAD_AUD_TXC__SD2_LCTL                0x05c 0x2b4 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_TXC__GPIO1_IO03              0x05c 0x2b4 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_TXD__AUD3_TXD                0x060 0x2b8 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_TXD__ECSPI3_SCLK             0x060 0x2b8 0x6b0 0x1 0x0
-#define MX6SL_PAD_AUD_TXD__UART4_CTS_B             0x060 0x2b8 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_TXD__UART4_RTS_B             0x060 0x2b8 0x810 0x2 0x0
-#define MX6SL_PAD_AUD_TXD__FEC_TX_DATA0            0x060 0x2b8 0x000 0x3 0x0
-#define MX6SL_PAD_AUD_TXD__SD4_LCTL                0x060 0x2b8 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_TXD__GPIO1_IO05              0x060 0x2b8 0x000 0x5 0x0
-#define MX6SL_PAD_AUD_TXFS__AUD3_TXFS              0x064 0x2bc 0x000 0x0 0x0
-#define MX6SL_PAD_AUD_TXFS__PWM3_OUT               0x064 0x2bc 0x000 0x1 0x0
-#define MX6SL_PAD_AUD_TXFS__UART4_RTS_B            0x064 0x2bc 0x810 0x2 0x1
-#define MX6SL_PAD_AUD_TXFS__UART4_CTS_B            0x064 0x2bc 0x000 0x2 0x0
-#define MX6SL_PAD_AUD_TXFS__FEC_RX_DATA1           0x064 0x2bc 0x6fc 0x3 0x0
-#define MX6SL_PAD_AUD_TXFS__SD3_LCTL               0x064 0x2bc 0x000 0x4 0x0
-#define MX6SL_PAD_AUD_TXFS__GPIO1_IO04             0x064 0x2bc 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO         0x068 0x358 0x684 0x0 0x0
-#define MX6SL_PAD_ECSPI1_MISO__AUD4_TXFS           0x068 0x358 0x5f8 0x1 0x0
-#define MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B         0x068 0x358 0x818 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MISO__UART5_CTS_B         0x068 0x358 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MISO__EPDC_BDR0           0x068 0x358 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_MISO__SD2_WP              0x068 0x358 0x834 0x4 0x0
-#define MX6SL_PAD_ECSPI1_MISO__GPIO4_IO10          0x068 0x358 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI         0x06c 0x35c 0x688 0x0 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__AUD4_TXC            0x06c 0x35c 0x5f4 0x1 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA       0x06c 0x35c 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__UART5_RX_DATA       0x06c 0x35c 0x81c 0x2 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__EPDC_VCOM1          0x06c 0x35c 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__SD2_VSELECT         0x06c 0x35c 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI1_MOSI__GPIO4_IO09          0x06c 0x35c 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK         0x070 0x360 0x67c 0x0 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__AUD4_TXD            0x070 0x360 0x5e8 0x1 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA       0x070 0x360 0x81c 0x2 0x1
-#define MX6SL_PAD_ECSPI1_SCLK__UART5_TX_DATA       0x070 0x360 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__EPDC_VCOM0          0x070 0x360 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__SD2_RESET           0x070 0x360 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__GPIO4_IO08          0x070 0x360 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_SCLK__USB_OTG2_OC         0x070 0x360 0x820 0x6 0x0
-#define MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0           0x074 0x364 0x68c 0x0 0x0
-#define MX6SL_PAD_ECSPI1_SS0__AUD4_RXD             0x074 0x364 0x5e4 0x1 0x0
-#define MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B          0x074 0x364 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI1_SS0__UART5_RTS_B          0x074 0x364 0x818 0x2 0x1
-#define MX6SL_PAD_ECSPI1_SS0__EPDC_BDR1            0x074 0x364 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI1_SS0__SD2_CD_B             0x074 0x364 0x830 0x4 0x0
-#define MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11           0x074 0x364 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI1_SS0__USB_OTG2_PWR         0x074 0x364 0x000 0x6 0x0
-#define MX6SL_PAD_ECSPI2_MISO__ECSPI2_MISO         0x078 0x368 0x6a0 0x0 0x0
-#define MX6SL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0     0x078 0x368 0x000 0x1 0x0
-#define MX6SL_PAD_ECSPI2_MISO__UART3_RTS_B         0x078 0x368 0x808 0x2 0x0
-#define MX6SL_PAD_ECSPI2_MISO__UART3_CTS_B         0x078 0x368 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_MISO__CSI_MCLK            0x078 0x368 0x000 0x3 0x0
-#define MX6SL_PAD_ECSPI2_MISO__SD1_WP              0x078 0x368 0x82c 0x4 0x0
-#define MX6SL_PAD_ECSPI2_MISO__GPIO4_IO14          0x078 0x368 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_MISO__USB_OTG1_OC         0x078 0x368 0x824 0x6 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__ECSPI2_MOSI         0x07c 0x36c 0x6a4 0x0 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1     0x07c 0x36c 0x000 0x1 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__UART3_TX_DATA       0x07c 0x36c 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__UART3_RX_DATA       0x07c 0x36c 0x80c 0x2 0x2
-#define MX6SL_PAD_ECSPI2_MOSI__CSI_HSYNC           0x07c 0x36c 0x670 0x3 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__SD1_VSELECT         0x07c 0x36c 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13          0x07c 0x36c 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__ECSPI2_SCLK         0x080 0x370 0x69c 0x0 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK       0x080 0x370 0x7f4 0x1 0x1
-#define MX6SL_PAD_ECSPI2_SCLK__UART3_RX_DATA       0x080 0x370 0x80c 0x2 0x3
-#define MX6SL_PAD_ECSPI2_SCLK__UART3_TX_DATA       0x080 0x370 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__CSI_PIXCLK          0x080 0x370 0x674 0x3 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__SD1_RESET           0x080 0x370 0x000 0x4 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__GPIO4_IO12          0x080 0x370 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_SCLK__USB_OTG2_OC         0x080 0x370 0x820 0x6 0x1
-#define MX6SL_PAD_ECSPI2_SS0__ECSPI2_SS0           0x084 0x374 0x6a8 0x0 0x0
-#define MX6SL_PAD_ECSPI2_SS0__ECSPI1_SS3           0x084 0x374 0x698 0x1 0x0
-#define MX6SL_PAD_ECSPI2_SS0__UART3_CTS_B          0x084 0x374 0x000 0x2 0x0
-#define MX6SL_PAD_ECSPI2_SS0__UART3_RTS_B          0x084 0x374 0x808 0x2 0x1
-#define MX6SL_PAD_ECSPI2_SS0__CSI_VSYNC            0x084 0x374 0x678 0x3 0x0
-#define MX6SL_PAD_ECSPI2_SS0__SD1_CD_B             0x084 0x374 0x828 0x4 0x0
-#define MX6SL_PAD_ECSPI2_SS0__GPIO4_IO15           0x084 0x374 0x000 0x5 0x0
-#define MX6SL_PAD_ECSPI2_SS0__USB_OTG1_PWR         0x084 0x374 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_BDR0__EPDC_BDR0             0x088 0x378 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_BDR0__SD4_CLK               0x088 0x378 0x850 0x1 0x0
-#define MX6SL_PAD_EPDC_BDR0__UART3_RTS_B           0x088 0x378 0x808 0x2 0x2
-#define MX6SL_PAD_EPDC_BDR0__UART3_CTS_B           0x088 0x378 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_BDR0__EIM_ADDR26            0x088 0x378 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_BDR0__SPDC_RL               0x088 0x378 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_BDR0__GPIO2_IO05            0x088 0x378 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_BDR0__EPDC_SDCE7            0x088 0x378 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_BDR1__EPDC_BDR1             0x08c 0x37c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_BDR1__SD4_CMD               0x08c 0x37c 0x858 0x1 0x0
-#define MX6SL_PAD_EPDC_BDR1__UART3_CTS_B           0x08c 0x37c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_BDR1__UART3_RTS_B           0x08c 0x37c 0x808 0x2 0x3
-#define MX6SL_PAD_EPDC_BDR1__EIM_CRE               0x08c 0x37c 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_BDR1__SPDC_UD               0x08c 0x37c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_BDR1__GPIO2_IO06            0x08c 0x37c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_BDR1__EPDC_SDCE8            0x08c 0x37c 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_D0__EPDC_DATA00             0x090 0x380 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D0__ECSPI4_MOSI             0x090 0x380 0x6d8 0x1 0x0
-#define MX6SL_PAD_EPDC_D0__LCD_DATA24              0x090 0x380 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D0__CSI_DATA00              0x090 0x380 0x630 0x3 0x0
-#define MX6SL_PAD_EPDC_D0__SPDC_DATA00             0x090 0x380 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D0__GPIO1_IO07              0x090 0x380 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D1__EPDC_DATA01             0x094 0x384 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D1__ECSPI4_MISO             0x094 0x384 0x6d4 0x1 0x0
-#define MX6SL_PAD_EPDC_D1__LCD_DATA25              0x094 0x384 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D1__CSI_DATA01              0x094 0x384 0x634 0x3 0x0
-#define MX6SL_PAD_EPDC_D1__SPDC_DATA01             0x094 0x384 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D1__GPIO1_IO08              0x094 0x384 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D10__EPDC_DATA10            0x098 0x388 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D10__ECSPI3_SS0             0x098 0x388 0x6c0 0x1 0x1
-#define MX6SL_PAD_EPDC_D10__EPDC_PWR_CTRL2         0x098 0x388 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D10__EIM_ADDR18             0x098 0x388 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D10__SPDC_DATA10            0x098 0x388 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D10__GPIO1_IO17             0x098 0x388 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D10__SD4_WP                 0x098 0x388 0x87c 0x6 0x0
-#define MX6SL_PAD_EPDC_D11__EPDC_DATA11            0x09c 0x38c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D11__ECSPI3_SCLK            0x09c 0x38c 0x6b0 0x1 0x1
-#define MX6SL_PAD_EPDC_D11__EPDC_PWR_CTRL3         0x09c 0x38c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D11__EIM_ADDR19             0x09c 0x38c 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D11__SPDC_DATA11            0x09c 0x38c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D11__GPIO1_IO18             0x09c 0x38c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D11__SD4_CD_B               0x09c 0x38c 0x854 0x6 0x0
-#define MX6SL_PAD_EPDC_D12__EPDC_DATA12            0x0a0 0x390 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D12__UART2_RX_DATA          0x0a0 0x390 0x804 0x1 0x0
-#define MX6SL_PAD_EPDC_D12__UART2_TX_DATA          0x0a0 0x390 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D12__EPDC_PWR_COM           0x0a0 0x390 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D12__EIM_ADDR20             0x0a0 0x390 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D12__SPDC_DATA12            0x0a0 0x390 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D12__GPIO1_IO19             0x0a0 0x390 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D12__ECSPI3_SS1             0x0a0 0x390 0x6c4 0x6 0x1
-#define MX6SL_PAD_EPDC_D13__EPDC_DATA13            0x0a4 0x394 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D13__UART2_TX_DATA          0x0a4 0x394 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D13__UART2_RX_DATA          0x0a4 0x394 0x804 0x1 0x1
-#define MX6SL_PAD_EPDC_D13__EPDC_PWR_IRQ           0x0a4 0x394 0x6e8 0x2 0x0
-#define MX6SL_PAD_EPDC_D13__EIM_ADDR21             0x0a4 0x394 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D13__SPDC_DATA13            0x0a4 0x394 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D13__GPIO1_IO20             0x0a4 0x394 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D13__ECSPI3_SS2             0x0a4 0x394 0x6c8 0x6 0x0
-#define MX6SL_PAD_EPDC_D14__EPDC_DATA14            0x0a8 0x398 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D14__UART2_RTS_B            0x0a8 0x398 0x800 0x1 0x0
-#define MX6SL_PAD_EPDC_D14__UART2_CTS_B            0x0a8 0x398 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D14__EPDC_PWR_STAT          0x0a8 0x398 0x6ec 0x2 0x0
-#define MX6SL_PAD_EPDC_D14__EIM_ADDR22             0x0a8 0x398 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D14__SPDC_DATA14            0x0a8 0x398 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D14__GPIO1_IO21             0x0a8 0x398 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D14__ECSPI3_SS3             0x0a8 0x398 0x6cc 0x6 0x0
-#define MX6SL_PAD_EPDC_D15__EPDC_DATA15            0x0ac 0x39c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D15__UART2_CTS_B            0x0ac 0x39c 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D15__UART2_RTS_B            0x0ac 0x39c 0x800 0x1 0x1
-#define MX6SL_PAD_EPDC_D15__EPDC_PWR_WAKE          0x0ac 0x39c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D15__EIM_ADDR23             0x0ac 0x39c 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D15__SPDC_DATA15            0x0ac 0x39c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D15__GPIO1_IO22             0x0ac 0x39c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D15__ECSPI3_RDY             0x0ac 0x39c 0x6b4 0x6 0x1
-#define MX6SL_PAD_EPDC_D2__EPDC_DATA02             0x0b0 0x3a0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D2__ECSPI4_SS0              0x0b0 0x3a0 0x6dc 0x1 0x0
-#define MX6SL_PAD_EPDC_D2__LCD_DATA26              0x0b0 0x3a0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D2__CSI_DATA02              0x0b0 0x3a0 0x638 0x3 0x0
-#define MX6SL_PAD_EPDC_D2__SPDC_DATA02             0x0b0 0x3a0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D2__GPIO1_IO09              0x0b0 0x3a0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D3__EPDC_DATA03             0x0b4 0x3a4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D3__ECSPI4_SCLK             0x0b4 0x3a4 0x6d0 0x1 0x0
-#define MX6SL_PAD_EPDC_D3__LCD_DATA27              0x0b4 0x3a4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D3__CSI_DATA03              0x0b4 0x3a4 0x63c 0x3 0x0
-#define MX6SL_PAD_EPDC_D3__SPDC_DATA03             0x0b4 0x3a4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D3__GPIO1_IO10              0x0b4 0x3a4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D4__EPDC_DATA04             0x0b8 0x3a8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D4__ECSPI4_SS1              0x0b8 0x3a8 0x6e0 0x1 0x0
-#define MX6SL_PAD_EPDC_D4__LCD_DATA28              0x0b8 0x3a8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D4__CSI_DATA04              0x0b8 0x3a8 0x640 0x3 0x0
-#define MX6SL_PAD_EPDC_D4__SPDC_DATA04             0x0b8 0x3a8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D4__GPIO1_IO11              0x0b8 0x3a8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D5__EPDC_DATA05             0x0bc 0x3ac 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D5__ECSPI4_SS2              0x0bc 0x3ac 0x6e4 0x1 0x0
-#define MX6SL_PAD_EPDC_D5__LCD_DATA29              0x0bc 0x3ac 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D5__CSI_DATA05              0x0bc 0x3ac 0x644 0x3 0x0
-#define MX6SL_PAD_EPDC_D5__SPDC_DATA05             0x0bc 0x3ac 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D5__GPIO1_IO12              0x0bc 0x3ac 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D6__EPDC_DATA06             0x0c0 0x3b0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D6__ECSPI4_SS3              0x0c0 0x3b0 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D6__LCD_DATA30              0x0c0 0x3b0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D6__CSI_DATA06              0x0c0 0x3b0 0x648 0x3 0x0
-#define MX6SL_PAD_EPDC_D6__SPDC_DATA06             0x0c0 0x3b0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D6__GPIO1_IO13              0x0c0 0x3b0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D7__EPDC_DATA07             0x0c4 0x3b4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D7__ECSPI4_RDY              0x0c4 0x3b4 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_D7__LCD_DATA31              0x0c4 0x3b4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D7__CSI_DATA07              0x0c4 0x3b4 0x64c 0x3 0x0
-#define MX6SL_PAD_EPDC_D7__SPDC_DATA07             0x0c4 0x3b4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D7__GPIO1_IO14              0x0c4 0x3b4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D8__EPDC_DATA08             0x0c8 0x3b8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D8__ECSPI3_MOSI             0x0c8 0x3b8 0x6bc 0x1 0x1
-#define MX6SL_PAD_EPDC_D8__EPDC_PWR_CTRL0          0x0c8 0x3b8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D8__EIM_ADDR16              0x0c8 0x3b8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D8__SPDC_DATA08             0x0c8 0x3b8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D8__GPIO1_IO15              0x0c8 0x3b8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D8__SD4_RESET               0x0c8 0x3b8 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_D9__EPDC_DATA09             0x0cc 0x3bc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_D9__ECSPI3_MISO             0x0cc 0x3bc 0x6b8 0x1 0x1
-#define MX6SL_PAD_EPDC_D9__EPDC_PWR_CTRL1          0x0cc 0x3bc 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_D9__EIM_ADDR17              0x0cc 0x3bc 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_D9__SPDC_DATA09             0x0cc 0x3bc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_D9__GPIO1_IO16              0x0cc 0x3bc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_D9__SD4_VSELECT             0x0cc 0x3bc 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK           0x0d0 0x3c0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDCLK__ECSPI2_SS2           0x0d0 0x3c0 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKR            0x0d0 0x3c0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDCLK__CSI_PIXCLK           0x0d0 0x3c0 0x674 0x3 0x1
-#define MX6SL_PAD_EPDC_GDCLK__SPDC_YCKL            0x0d0 0x3c0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDCLK__GPIO1_IO31           0x0d0 0x3c0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDCLK__SD2_RESET            0x0d0 0x3c0 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_GDOE__EPDC_GDOE             0x0d4 0x3c4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDOE__ECSPI2_SS3            0x0d4 0x3c4 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDOE__SPDC_YOER             0x0d4 0x3c4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDOE__CSI_HSYNC             0x0d4 0x3c4 0x670 0x3 0x1
-#define MX6SL_PAD_EPDC_GDOE__SPDC_YOEL             0x0d4 0x3c4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDOE__GPIO2_IO00            0x0d4 0x3c4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDOE__SD2_VSELECT           0x0d4 0x3c4 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_GDRL__EPDC_GDRL             0x0d8 0x3c8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDRL__ECSPI2_RDY            0x0d8 0x3c8 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUR           0x0d8 0x3c8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDRL__CSI_MCLK              0x0d8 0x3c8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_GDRL__SPDC_YDIOUL           0x0d8 0x3c8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDRL__GPIO2_IO01            0x0d8 0x3c8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDRL__SD2_WP                0x0d8 0x3c8 0x834 0x6 0x1
-#define MX6SL_PAD_EPDC_GDSP__EPDC_GDSP             0x0dc 0x3cc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_GDSP__PWM4_OUT              0x0dc 0x3cc 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODR           0x0dc 0x3cc 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_GDSP__CSI_VSYNC             0x0dc 0x3cc 0x678 0x3 0x1
-#define MX6SL_PAD_EPDC_GDSP__SPDC_YDIODL           0x0dc 0x3cc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_GDSP__GPIO2_IO02            0x0dc 0x3cc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_GDSP__SD2_CD_B              0x0dc 0x3cc 0x830 0x6 0x1
-#define MX6SL_PAD_EPDC_PWRCOM__EPDC_PWR_COM        0x0e0 0x3d0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__SD4_DATA0           0x0e0 0x3d0 0x85c 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__LCD_DATA20          0x0e0 0x3d0 0x7c8 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__EIM_BCLK            0x0e0 0x3d0 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID         0x0e0 0x3d0 0x5dc 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__GPIO2_IO11          0x0e0 0x3d0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCOM__SD3_RESET           0x0e0 0x3d0 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__EPDC_PWR_CTRL0    0x0e4 0x3d4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__AUD5_RXC          0x0e4 0x3d4 0x604 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__LCD_DATA16        0x0e4 0x3d4 0x7b8 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__EIM_RW            0x0e4 0x3d4 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__SPDC_YCKL         0x0e4 0x3d4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07        0x0e4 0x3d4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL0__SD4_RESET         0x0e4 0x3d4 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__EPDC_PWR_CTRL1    0x0e8 0x3d8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__AUD5_TXFS         0x0e8 0x3d8 0x610 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__LCD_DATA17        0x0e8 0x3d8 0x7bc 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__EIM_OE_B          0x0e8 0x3d8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__SPDC_YOEL         0x0e8 0x3d8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08        0x0e8 0x3d8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL1__SD4_VSELECT       0x0e8 0x3d8 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__EPDC_PWR_CTRL2    0x0ec 0x3dc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__AUD5_TXD          0x0ec 0x3dc 0x600 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__LCD_DATA18        0x0ec 0x3dc 0x7c0 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__EIM_CS0_B         0x0ec 0x3dc 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__SPDC_YDIOUL       0x0ec 0x3dc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__GPIO2_IO09        0x0ec 0x3dc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL2__SD4_WP            0x0ec 0x3dc 0x87c 0x6 0x1
-#define MX6SL_PAD_EPDC_PWRCTRL3__EPDC_PWR_CTRL3    0x0f0 0x3e0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__AUD5_TXC          0x0f0 0x3e0 0x60c 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__LCD_DATA19        0x0f0 0x3e0 0x7c4 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__EIM_CS1_B         0x0f0 0x3e0 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__SPDC_YDIODL       0x0f0 0x3e0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10        0x0f0 0x3e0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRCTRL3__SD4_CD_B          0x0f0 0x3e0 0x854 0x6 0x1
-#define MX6SL_PAD_EPDC_PWRINT__EPDC_PWR_IRQ        0x0f4 0x3e4 0x6e8 0x0 0x1
-#define MX6SL_PAD_EPDC_PWRINT__SD4_DATA1           0x0f4 0x3e4 0x860 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRINT__LCD_DATA21          0x0f4 0x3e4 0x7cc 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRINT__EIM_ACLK_FREERUN    0x0f4 0x3e4 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRINT__USB_OTG2_ID         0x0f4 0x3e4 0x5e0 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRINT__GPIO2_IO12          0x0f4 0x3e4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRINT__SD3_VSELECT         0x0f4 0x3e4 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__EPDC_PWR_STAT      0x0f8 0x3e8 0x6ec 0x0 0x1
-#define MX6SL_PAD_EPDC_PWRSTAT__SD4_DATA2          0x0f8 0x3e8 0x864 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__LCD_DATA22         0x0f8 0x3e8 0x7d0 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__EIM_WAIT_B         0x0f8 0x3e8 0x884 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__ARM_EVENTI         0x0f8 0x3e8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13         0x0f8 0x3e8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRSTAT__SD3_WP             0x0f8 0x3e8 0x84c 0x6 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__EPDC_PWR_WAKE    0x0fc 0x3ec 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__SD4_DATA3        0x0fc 0x3ec 0x868 0x1 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__LCD_DATA23       0x0fc 0x3ec 0x7d4 0x2 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__EIM_DTACK_B      0x0fc 0x3ec 0x880 0x3 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__ARM_EVENTO       0x0fc 0x3ec 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14       0x0fc 0x3ec 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_PWRWAKEUP__SD3_CD_B         0x0fc 0x3ec 0x838 0x6 0x0
-#define MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE0           0x100 0x3f0 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE0__ECSPI2_SS1           0x100 0x3f0 0x6ac 0x1 0x0
-#define MX6SL_PAD_EPDC_SDCE0__PWM3_OUT             0x100 0x3f0 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE0__EIM_CS2_B            0x100 0x3f0 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE0__SPDC_YCKR            0x100 0x3f0 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE0__GPIO1_IO27           0x100 0x3f0 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE1           0x104 0x3f4 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE1__WDOG2_B              0x104 0x3f4 0x000 0x1 0x0
-#define MX6SL_PAD_EPDC_SDCE1__PWM4_OUT             0x104 0x3f4 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE1__EIM_LBA_B            0x104 0x3f4 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE1__SPDC_YOER            0x104 0x3f4 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE1__GPIO1_IO28           0x104 0x3f4 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE2           0x108 0x3f8 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE2__I2C3_SCL             0x108 0x3f8 0x72c 0x1 0x1
-#define MX6SL_PAD_EPDC_SDCE2__PWM1_OUT             0x108 0x3f8 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE2__EIM_EB0_B            0x108 0x3f8 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE2__SPDC_YDIOUR          0x108 0x3f8 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29           0x108 0x3f8 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCE3__EPDC_SDCE3           0x10c 0x3fc 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCE3__I2C3_SDA             0x10c 0x3fc 0x730 0x1 0x1
-#define MX6SL_PAD_EPDC_SDCE3__PWM2_OUT             0x10c 0x3fc 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCE3__EIM_EB1_B            0x10c 0x3fc 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCE3__SPDC_YDIODR          0x10c 0x3fc 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCE3__GPIO1_IO30           0x10c 0x3fc 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK_P         0x110 0x400 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDCLK__ECSPI2_MOSI          0x110 0x400 0x6a4 0x1 0x1
-#define MX6SL_PAD_EPDC_SDCLK__I2C2_SCL             0x110 0x400 0x724 0x2 0x0
-#define MX6SL_PAD_EPDC_SDCLK__CSI_DATA08           0x110 0x400 0x650 0x3 0x0
-#define MX6SL_PAD_EPDC_SDCLK__SPDC_CL              0x110 0x400 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDCLK__GPIO1_IO23           0x110 0x400 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDLE__EPDC_SDLE             0x114 0x404 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDLE__ECSPI2_MISO           0x114 0x404 0x6a0 0x1 0x1
-#define MX6SL_PAD_EPDC_SDLE__I2C2_SDA              0x114 0x404 0x728 0x2 0x0
-#define MX6SL_PAD_EPDC_SDLE__CSI_DATA09            0x114 0x404 0x654 0x3 0x0
-#define MX6SL_PAD_EPDC_SDLE__SPDC_LD               0x114 0x404 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDLE__GPIO1_IO24            0x114 0x404 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDOE__EPDC_SDOE             0x118 0x408 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDOE__ECSPI2_SS0            0x118 0x408 0x6a8 0x1 0x1
-#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOR            0x118 0x408 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDOE__CSI_DATA10            0x118 0x408 0x658 0x3 0x0
-#define MX6SL_PAD_EPDC_SDOE__SPDC_XDIOL            0x118 0x408 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDOE__GPIO1_IO25            0x118 0x408 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR           0x11c 0x40c 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_SDSHR__ECSPI2_SCLK          0x11c 0x40c 0x69c 0x1 0x1
-#define MX6SL_PAD_EPDC_SDSHR__EPDC_SDCE4           0x11c 0x40c 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_SDSHR__CSI_DATA11           0x11c 0x40c 0x65c 0x3 0x0
-#define MX6SL_PAD_EPDC_SDSHR__SPDC_XDIOR           0x11c 0x40c 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_SDSHR__GPIO1_IO26           0x11c 0x40c 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_VCOM0__EPDC_VCOM0           0x120 0x410 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_VCOM0__AUD5_RXFS            0x120 0x410 0x608 0x1 0x0
-#define MX6SL_PAD_EPDC_VCOM0__UART3_RX_DATA        0x120 0x410 0x80c 0x2 0x4
-#define MX6SL_PAD_EPDC_VCOM0__UART3_TX_DATA        0x120 0x410 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_VCOM0__EIM_ADDR24           0x120 0x410 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_VCOM0__SPDC_VCOM0           0x120 0x410 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03           0x120 0x410 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_VCOM0__EPDC_SDCE5           0x120 0x410 0x000 0x6 0x0
-#define MX6SL_PAD_EPDC_VCOM1__EPDC_VCOM1           0x124 0x414 0x000 0x0 0x0
-#define MX6SL_PAD_EPDC_VCOM1__AUD5_RXD             0x124 0x414 0x5fc 0x1 0x0
-#define MX6SL_PAD_EPDC_VCOM1__UART3_TX_DATA        0x124 0x414 0x000 0x2 0x0
-#define MX6SL_PAD_EPDC_VCOM1__UART3_RX_DATA        0x124 0x414 0x80c 0x2 0x5
-#define MX6SL_PAD_EPDC_VCOM1__EIM_ADDR25           0x124 0x414 0x000 0x3 0x0
-#define MX6SL_PAD_EPDC_VCOM1__SPDC_VCOM1           0x124 0x414 0x000 0x4 0x0
-#define MX6SL_PAD_EPDC_VCOM1__GPIO2_IO04           0x124 0x414 0x000 0x5 0x0
-#define MX6SL_PAD_EPDC_VCOM1__EPDC_SDCE6           0x124 0x414 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV            0x128 0x418 0x704 0x0 0x1
-#define MX6SL_PAD_FEC_CRS_DV__SD4_DATA1            0x128 0x418 0x860 0x1 0x1
-#define MX6SL_PAD_FEC_CRS_DV__AUD6_TXC             0x128 0x418 0x624 0x2 0x0
-#define MX6SL_PAD_FEC_CRS_DV__ECSPI4_MISO          0x128 0x418 0x6d4 0x3 0x1
-#define MX6SL_PAD_FEC_CRS_DV__GPT_COMPARE2         0x128 0x418 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25           0x128 0x418 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_CRS_DV__ARM_TRACE31          0x128 0x418 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_MDC__FEC_MDC                 0x12c 0x41c 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_MDC__SD4_DATA4               0x12c 0x41c 0x86c 0x1 0x0
-#define MX6SL_PAD_FEC_MDC__AUDIO_CLK_OUT           0x12c 0x41c 0x000 0x2 0x0
-#define MX6SL_PAD_FEC_MDC__SD1_RESET               0x12c 0x41c 0x000 0x3 0x0
-#define MX6SL_PAD_FEC_MDC__SD3_RESET               0x12c 0x41c 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_MDC__GPIO4_IO23              0x12c 0x41c 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_MDC__ARM_TRACE29             0x12c 0x41c 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_MDIO__FEC_MDIO               0x130 0x420 0x6f4 0x0 0x1
-#define MX6SL_PAD_FEC_MDIO__SD4_CLK                0x130 0x420 0x850 0x1 0x1
-#define MX6SL_PAD_FEC_MDIO__AUD6_RXFS              0x130 0x420 0x620 0x2 0x0
-#define MX6SL_PAD_FEC_MDIO__ECSPI4_SS0             0x130 0x420 0x6dc 0x3 0x1
-#define MX6SL_PAD_FEC_MDIO__GPT_CAPTURE1           0x130 0x420 0x710 0x4 0x0
-#define MX6SL_PAD_FEC_MDIO__GPIO4_IO20             0x130 0x420 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_MDIO__ARM_TRACE26            0x130 0x420 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT         0x134 0x424 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_REF_CLK__SD4_RESET           0x134 0x424 0x000 0x1 0x0
-#define MX6SL_PAD_FEC_REF_CLK__WDOG1_B             0x134 0x424 0x000 0x2 0x0
-#define MX6SL_PAD_FEC_REF_CLK__PWM4_OUT            0x134 0x424 0x000 0x3 0x0
-#define MX6SL_PAD_FEC_REF_CLK__CCM_PMIC_READY      0x134 0x424 0x62c 0x4 0x0
-#define MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26          0x134 0x424 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_REF_CLK__SPDIF_EXT_CLK       0x134 0x424 0x7f4 0x6 0x2
-#define MX6SL_PAD_FEC_RX_ER__FEC_RX_ER             0x138 0x428 0x708 0x0 0x1
-#define MX6SL_PAD_FEC_RX_ER__SD4_DATA0             0x138 0x428 0x85c 0x1 0x1
-#define MX6SL_PAD_FEC_RX_ER__AUD6_RXD              0x138 0x428 0x614 0x2 0x0
-#define MX6SL_PAD_FEC_RX_ER__ECSPI4_MOSI           0x138 0x428 0x6d8 0x3 0x1
-#define MX6SL_PAD_FEC_RX_ER__GPT_COMPARE1          0x138 0x428 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_RX_ER__GPIO4_IO19            0x138 0x428 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_RX_ER__ARM_TRACE25           0x138 0x428 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0           0x13c 0x42c 0x6f8 0x0 0x0
-#define MX6SL_PAD_FEC_RXD0__SD4_DATA5              0x13c 0x42c 0x870 0x1 0x0
-#define MX6SL_PAD_FEC_RXD0__USB_OTG1_ID            0x13c 0x42c 0x5dc 0x2 0x1
-#define MX6SL_PAD_FEC_RXD0__SD1_VSELECT            0x13c 0x42c 0x000 0x3 0x0
-#define MX6SL_PAD_FEC_RXD0__SD3_VSELECT            0x13c 0x42c 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_RXD0__GPIO4_IO17             0x13c 0x42c 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_RXD0__ARM_TRACE24            0x13c 0x42c 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1           0x140 0x430 0x6fc 0x0 0x1
-#define MX6SL_PAD_FEC_RXD1__SD4_DATA2              0x140 0x430 0x864 0x1 0x1
-#define MX6SL_PAD_FEC_RXD1__AUD6_TXFS              0x140 0x430 0x628 0x2 0x0
-#define MX6SL_PAD_FEC_RXD1__ECSPI4_SS1             0x140 0x430 0x6e0 0x3 0x1
-#define MX6SL_PAD_FEC_RXD1__GPT_COMPARE3           0x140 0x430 0x000 0x4 0x0
-#define MX6SL_PAD_FEC_RXD1__GPIO4_IO18             0x140 0x430 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_RXD1__FEC_COL                0x140 0x430 0x6f0 0x6 0x0
-#define MX6SL_PAD_FEC_TX_CLK__FEC_TX_CLK           0x144 0x434 0x70c 0x0 0x1
-#define MX6SL_PAD_FEC_TX_CLK__SD4_CMD              0x144 0x434 0x858 0x1 0x1
-#define MX6SL_PAD_FEC_TX_CLK__AUD6_RXC             0x144 0x434 0x61c 0x2 0x0
-#define MX6SL_PAD_FEC_TX_CLK__ECSPI4_SCLK          0x144 0x434 0x6d0 0x3 0x1
-#define MX6SL_PAD_FEC_TX_CLK__GPT_CAPTURE2         0x144 0x434 0x714 0x4 0x0
-#define MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21           0x144 0x434 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TX_CLK__ARM_TRACE27          0x144 0x434 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_TX_EN__FEC_TX_EN             0x148 0x438 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_TX_EN__SD4_DATA6             0x148 0x438 0x874 0x1 0x0
-#define MX6SL_PAD_FEC_TX_EN__SPDIF_IN              0x148 0x438 0x7f0 0x2 0x0
-#define MX6SL_PAD_FEC_TX_EN__SD1_WP                0x148 0x438 0x82c 0x3 0x1
-#define MX6SL_PAD_FEC_TX_EN__SD3_WP                0x148 0x438 0x84c 0x4 0x1
-#define MX6SL_PAD_FEC_TX_EN__GPIO4_IO22            0x148 0x438 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TX_EN__ARM_TRACE28           0x148 0x438 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0           0x14c 0x43c 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_TXD0__SD4_DATA3              0x14c 0x43c 0x868 0x1 0x1
-#define MX6SL_PAD_FEC_TXD0__AUD6_TXD               0x14c 0x43c 0x618 0x2 0x0
-#define MX6SL_PAD_FEC_TXD0__ECSPI4_SS2             0x14c 0x43c 0x6e4 0x3 0x1
-#define MX6SL_PAD_FEC_TXD0__GPT_CLKIN              0x14c 0x43c 0x718 0x4 0x0
-#define MX6SL_PAD_FEC_TXD0__GPIO4_IO24             0x14c 0x43c 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TXD0__ARM_TRACE30            0x14c 0x43c 0x000 0x6 0x0
-#define MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1           0x150 0x440 0x000 0x0 0x0
-#define MX6SL_PAD_FEC_TXD1__SD4_DATA7              0x150 0x440 0x878 0x1 0x0
-#define MX6SL_PAD_FEC_TXD1__SPDIF_OUT              0x150 0x440 0x000 0x2 0x0
-#define MX6SL_PAD_FEC_TXD1__SD1_CD_B               0x150 0x440 0x828 0x3 0x1
-#define MX6SL_PAD_FEC_TXD1__SD3_CD_B               0x150 0x440 0x838 0x4 0x1
-#define MX6SL_PAD_FEC_TXD1__GPIO4_IO16             0x150 0x440 0x000 0x5 0x0
-#define MX6SL_PAD_FEC_TXD1__FEC_RX_CLK             0x150 0x440 0x700 0x6 0x0
-#define MX6SL_PAD_HSIC_DAT__USB_H_DATA             0x154 0x444 0x000 0x0 0x0
-#define MX6SL_PAD_HSIC_DAT__I2C1_SCL               0x154 0x444 0x71c 0x1 0x1
-#define MX6SL_PAD_HSIC_DAT__PWM1_OUT               0x154 0x444 0x000 0x2 0x0
-#define MX6SL_PAD_HSIC_DAT__XTALOSC_REF_CLK_24M    0x154 0x444 0x000 0x3 0x0
-#define MX6SL_PAD_HSIC_DAT__GPIO3_IO19             0x154 0x444 0x000 0x5 0x0
-#define MX6SL_PAD_HSIC_STROBE__USB_H_STROBE        0x158 0x448 0x000 0x0 0x0
-#define MX6SL_PAD_HSIC_STROBE__I2C1_SDA            0x158 0x448 0x720 0x1 0x1
-#define MX6SL_PAD_HSIC_STROBE__PWM2_OUT            0x158 0x448 0x000 0x2 0x0
-#define MX6SL_PAD_HSIC_STROBE__XTALOSC_REF_CLK_32K 0x158 0x448 0x000 0x3 0x0
-#define MX6SL_PAD_HSIC_STROBE__GPIO3_IO20          0x158 0x448 0x000 0x5 0x0
-#define MX6SL_PAD_I2C1_SCL__I2C1_SCL               0x15c 0x44c 0x71c 0x0 0x2
-#define MX6SL_PAD_I2C1_SCL__UART1_RTS_B            0x15c 0x44c 0x7f8 0x1 0x0
-#define MX6SL_PAD_I2C1_SCL__UART1_CTS_B            0x15c 0x44c 0x000 0x1 0x0
-#define MX6SL_PAD_I2C1_SCL__ECSPI3_SS2             0x15c 0x44c 0x6c8 0x2 0x1
-#define MX6SL_PAD_I2C1_SCL__FEC_RX_DATA0           0x15c 0x44c 0x6f8 0x3 0x1
-#define MX6SL_PAD_I2C1_SCL__SD3_RESET              0x15c 0x44c 0x000 0x4 0x0
-#define MX6SL_PAD_I2C1_SCL__GPIO3_IO12             0x15c 0x44c 0x000 0x5 0x0
-#define MX6SL_PAD_I2C1_SCL__ECSPI1_SS1             0x15c 0x44c 0x690 0x6 0x0
-#define MX6SL_PAD_I2C1_SDA__I2C1_SDA               0x160 0x450 0x720 0x0 0x2
-#define MX6SL_PAD_I2C1_SDA__UART1_CTS_B            0x160 0x450 0x000 0x1 0x0
-#define MX6SL_PAD_I2C1_SDA__UART1_RTS_B            0x160 0x450 0x7f8 0x1 0x1
-#define MX6SL_PAD_I2C1_SDA__ECSPI3_SS3             0x160 0x450 0x6cc 0x2 0x1
-#define MX6SL_PAD_I2C1_SDA__FEC_TX_EN              0x160 0x450 0x000 0x3 0x0
-#define MX6SL_PAD_I2C1_SDA__SD3_VSELECT            0x160 0x450 0x000 0x4 0x0
-#define MX6SL_PAD_I2C1_SDA__GPIO3_IO13             0x160 0x450 0x000 0x5 0x0
-#define MX6SL_PAD_I2C1_SDA__ECSPI1_SS2             0x160 0x450 0x694 0x6 0x0
-#define MX6SL_PAD_I2C2_SCL__I2C2_SCL               0x164 0x454 0x724 0x0 0x1
-#define MX6SL_PAD_I2C2_SCL__AUD4_RXFS              0x164 0x454 0x5f0 0x1 0x0
-#define MX6SL_PAD_I2C2_SCL__SPDIF_IN               0x164 0x454 0x7f0 0x2 0x1
-#define MX6SL_PAD_I2C2_SCL__FEC_TX_DATA1           0x164 0x454 0x000 0x3 0x0
-#define MX6SL_PAD_I2C2_SCL__SD3_WP                 0x164 0x454 0x84c 0x4 0x2
-#define MX6SL_PAD_I2C2_SCL__GPIO3_IO14             0x164 0x454 0x000 0x5 0x0
-#define MX6SL_PAD_I2C2_SCL__ECSPI1_RDY             0x164 0x454 0x680 0x6 0x0
-#define MX6SL_PAD_I2C2_SDA__I2C2_SDA               0x168 0x458 0x728 0x0 0x1
-#define MX6SL_PAD_I2C2_SDA__AUD4_RXC               0x168 0x458 0x5ec 0x1 0x0
-#define MX6SL_PAD_I2C2_SDA__SPDIF_OUT              0x168 0x458 0x000 0x2 0x0
-#define MX6SL_PAD_I2C2_SDA__FEC_REF_OUT            0x168 0x458 0x000 0x3 0x0
-#define MX6SL_PAD_I2C2_SDA__SD3_CD_B               0x168 0x458 0x838 0x4 0x2
-#define MX6SL_PAD_I2C2_SDA__GPIO3_IO15             0x168 0x458 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL0__KEY_COL0               0x16c 0x474 0x734 0x0 0x0
-#define MX6SL_PAD_KEY_COL0__I2C2_SCL               0x16c 0x474 0x724 0x1 0x2
-#define MX6SL_PAD_KEY_COL0__LCD_DATA00             0x16c 0x474 0x778 0x2 0x0
-#define MX6SL_PAD_KEY_COL0__EIM_AD00               0x16c 0x474 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL0__SD1_CD_B               0x16c 0x474 0x828 0x4 0x2
-#define MX6SL_PAD_KEY_COL0__GPIO3_IO24             0x16c 0x474 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL1__KEY_COL1               0x170 0x478 0x738 0x0 0x0
-#define MX6SL_PAD_KEY_COL1__ECSPI4_MOSI            0x170 0x478 0x6d8 0x1 0x2
-#define MX6SL_PAD_KEY_COL1__LCD_DATA02             0x170 0x478 0x780 0x2 0x0
-#define MX6SL_PAD_KEY_COL1__EIM_AD02               0x170 0x478 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL1__SD3_DATA4              0x170 0x478 0x83c 0x4 0x0
-#define MX6SL_PAD_KEY_COL1__GPIO3_IO26             0x170 0x478 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL2__KEY_COL2               0x174 0x47c 0x73c 0x0 0x0
-#define MX6SL_PAD_KEY_COL2__ECSPI4_SS0             0x174 0x47c 0x6dc 0x1 0x2
-#define MX6SL_PAD_KEY_COL2__LCD_DATA04             0x174 0x47c 0x788 0x2 0x0
-#define MX6SL_PAD_KEY_COL2__EIM_AD04               0x174 0x47c 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL2__SD3_DATA6              0x174 0x47c 0x844 0x4 0x0
-#define MX6SL_PAD_KEY_COL2__GPIO3_IO28             0x174 0x47c 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL3__KEY_COL3               0x178 0x480 0x740 0x0 0x0
-#define MX6SL_PAD_KEY_COL3__AUD6_RXFS              0x178 0x480 0x620 0x1 0x1
-#define MX6SL_PAD_KEY_COL3__LCD_DATA06             0x178 0x480 0x790 0x2 0x0
-#define MX6SL_PAD_KEY_COL3__EIM_AD06               0x178 0x480 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL3__SD4_DATA6              0x178 0x480 0x874 0x4 0x1
-#define MX6SL_PAD_KEY_COL3__GPIO3_IO30             0x178 0x480 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL3__SD1_RESET              0x178 0x480 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL4__KEY_COL4               0x17c 0x484 0x744 0x0 0x0
-#define MX6SL_PAD_KEY_COL4__AUD6_RXD               0x17c 0x484 0x614 0x1 0x1
-#define MX6SL_PAD_KEY_COL4__LCD_DATA08             0x17c 0x484 0x798 0x2 0x0
-#define MX6SL_PAD_KEY_COL4__EIM_AD08               0x17c 0x484 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL4__SD4_CLK                0x17c 0x484 0x850 0x4 0x2
-#define MX6SL_PAD_KEY_COL4__GPIO4_IO00             0x17c 0x484 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL4__USB_OTG1_PWR           0x17c 0x484 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL5__KEY_COL5               0x180 0x488 0x748 0x0 0x0
-#define MX6SL_PAD_KEY_COL5__AUD6_TXFS              0x180 0x488 0x628 0x1 0x1
-#define MX6SL_PAD_KEY_COL5__LCD_DATA10             0x180 0x488 0x7a0 0x2 0x0
-#define MX6SL_PAD_KEY_COL5__EIM_AD10               0x180 0x488 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL5__SD4_DATA0              0x180 0x488 0x85c 0x4 0x2
-#define MX6SL_PAD_KEY_COL5__GPIO4_IO02             0x180 0x488 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL5__USB_OTG2_PWR           0x180 0x488 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL6__KEY_COL6               0x184 0x48c 0x74c 0x0 0x0
-#define MX6SL_PAD_KEY_COL6__UART4_RX_DATA          0x184 0x48c 0x814 0x1 0x2
-#define MX6SL_PAD_KEY_COL6__UART4_TX_DATA          0x184 0x48c 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_COL6__LCD_DATA12             0x184 0x48c 0x7a8 0x2 0x0
-#define MX6SL_PAD_KEY_COL6__EIM_AD12               0x184 0x48c 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL6__SD4_DATA2              0x184 0x48c 0x864 0x4 0x2
-#define MX6SL_PAD_KEY_COL6__GPIO4_IO04             0x184 0x48c 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL6__SD3_RESET              0x184 0x48c 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_COL7__KEY_COL7               0x188 0x490 0x750 0x0 0x0
-#define MX6SL_PAD_KEY_COL7__UART4_RTS_B            0x188 0x490 0x810 0x1 0x2
-#define MX6SL_PAD_KEY_COL7__UART4_CTS_B            0x188 0x490 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_COL7__LCD_DATA14             0x188 0x490 0x7b0 0x2 0x0
-#define MX6SL_PAD_KEY_COL7__EIM_AD14               0x188 0x490 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_COL7__SD4_DATA4              0x188 0x490 0x86c 0x4 0x1
-#define MX6SL_PAD_KEY_COL7__GPIO4_IO06             0x188 0x490 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_COL7__SD1_WP                 0x188 0x490 0x82c 0x6 0x2
-#define MX6SL_PAD_KEY_ROW0__KEY_ROW0               0x18c 0x494 0x754 0x0 0x0
-#define MX6SL_PAD_KEY_ROW0__I2C2_SDA               0x18c 0x494 0x728 0x1 0x2
-#define MX6SL_PAD_KEY_ROW0__LCD_DATA01             0x18c 0x494 0x77c 0x2 0x0
-#define MX6SL_PAD_KEY_ROW0__EIM_AD01               0x18c 0x494 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW0__SD1_WP                 0x18c 0x494 0x82c 0x4 0x3
-#define MX6SL_PAD_KEY_ROW0__GPIO3_IO25             0x18c 0x494 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW1__KEY_ROW1               0x190 0x498 0x758 0x0 0x0
-#define MX6SL_PAD_KEY_ROW1__ECSPI4_MISO            0x190 0x498 0x6d4 0x1 0x2
-#define MX6SL_PAD_KEY_ROW1__LCD_DATA03             0x190 0x498 0x784 0x2 0x0
-#define MX6SL_PAD_KEY_ROW1__EIM_AD03               0x190 0x498 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW1__SD3_DATA5              0x190 0x498 0x840 0x4 0x0
-#define MX6SL_PAD_KEY_ROW1__GPIO3_IO27             0x190 0x498 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW2__KEY_ROW2               0x194 0x49c 0x75c 0x0 0x0
-#define MX6SL_PAD_KEY_ROW2__ECSPI4_SCLK            0x194 0x49c 0x6d0 0x1 0x2
-#define MX6SL_PAD_KEY_ROW2__LCD_DATA05             0x194 0x49c 0x78c 0x2 0x0
-#define MX6SL_PAD_KEY_ROW2__EIM_AD05               0x194 0x49c 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW2__SD3_DATA7              0x194 0x49c 0x848 0x4 0x0
-#define MX6SL_PAD_KEY_ROW2__GPIO3_IO29             0x194 0x49c 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW3__KEY_ROW3               0x198 0x4a0 0x760 0x0 0x0
-#define MX6SL_PAD_KEY_ROW3__AUD6_RXC               0x198 0x4a0 0x61c 0x1 0x1
-#define MX6SL_PAD_KEY_ROW3__LCD_DATA07             0x198 0x4a0 0x794 0x2 0x0
-#define MX6SL_PAD_KEY_ROW3__EIM_AD07               0x198 0x4a0 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW3__SD4_DATA7              0x198 0x4a0 0x878 0x4 0x1
-#define MX6SL_PAD_KEY_ROW3__GPIO3_IO31             0x198 0x4a0 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW3__SD1_VSELECT            0x198 0x4a0 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_ROW4__KEY_ROW4               0x19c 0x4a4 0x764 0x0 0x0
-#define MX6SL_PAD_KEY_ROW4__AUD6_TXC               0x19c 0x4a4 0x624 0x1 0x1
-#define MX6SL_PAD_KEY_ROW4__LCD_DATA09             0x19c 0x4a4 0x79c 0x2 0x0
-#define MX6SL_PAD_KEY_ROW4__EIM_AD09               0x19c 0x4a4 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW4__SD4_CMD                0x19c 0x4a4 0x858 0x4 0x2
-#define MX6SL_PAD_KEY_ROW4__GPIO4_IO01             0x19c 0x4a4 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW4__USB_OTG1_OC            0x19c 0x4a4 0x824 0x6 0x1
-#define MX6SL_PAD_KEY_ROW5__KEY_ROW5               0x1a0 0x4a8 0x768 0x0 0x0
-#define MX6SL_PAD_KEY_ROW5__AUD6_TXD               0x1a0 0x4a8 0x618 0x1 0x1
-#define MX6SL_PAD_KEY_ROW5__LCD_DATA11             0x1a0 0x4a8 0x7a4 0x2 0x0
-#define MX6SL_PAD_KEY_ROW5__EIM_AD11               0x1a0 0x4a8 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW5__SD4_DATA1              0x1a0 0x4a8 0x860 0x4 0x2
-#define MX6SL_PAD_KEY_ROW5__GPIO4_IO03             0x1a0 0x4a8 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW5__USB_OTG2_OC            0x1a0 0x4a8 0x820 0x6 0x2
-#define MX6SL_PAD_KEY_ROW6__KEY_ROW6               0x1a4 0x4ac 0x76c 0x0 0x0
-#define MX6SL_PAD_KEY_ROW6__UART4_TX_DATA          0x1a4 0x4ac 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_ROW6__UART4_RX_DATA          0x1a4 0x4ac 0x814 0x1 0x3
-#define MX6SL_PAD_KEY_ROW6__LCD_DATA13             0x1a4 0x4ac 0x7ac 0x2 0x0
-#define MX6SL_PAD_KEY_ROW6__EIM_AD13               0x1a4 0x4ac 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW6__SD4_DATA3              0x1a4 0x4ac 0x868 0x4 0x2
-#define MX6SL_PAD_KEY_ROW6__GPIO4_IO05             0x1a4 0x4ac 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW6__SD3_VSELECT            0x1a4 0x4ac 0x000 0x6 0x0
-#define MX6SL_PAD_KEY_ROW7__KEY_ROW7               0x1a8 0x4b0 0x770 0x0 0x0
-#define MX6SL_PAD_KEY_ROW7__UART4_CTS_B            0x1a8 0x4b0 0x000 0x1 0x0
-#define MX6SL_PAD_KEY_ROW7__UART4_RTS_B            0x1a8 0x4b0 0x810 0x1 0x3
-#define MX6SL_PAD_KEY_ROW7__LCD_DATA15             0x1a8 0x4b0 0x7b4 0x2 0x0
-#define MX6SL_PAD_KEY_ROW7__EIM_AD15               0x1a8 0x4b0 0x000 0x3 0x0
-#define MX6SL_PAD_KEY_ROW7__SD4_DATA5              0x1a8 0x4b0 0x870 0x4 0x1
-#define MX6SL_PAD_KEY_ROW7__GPIO4_IO07             0x1a8 0x4b0 0x000 0x5 0x0
-#define MX6SL_PAD_KEY_ROW7__SD1_CD_B               0x1a8 0x4b0 0x828 0x6 0x3
-#define MX6SL_PAD_LCD_CLK__LCD_CLK                 0x1ac 0x4b4 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_CLK__SD4_DATA4               0x1ac 0x4b4 0x86c 0x1 0x2
-#define MX6SL_PAD_LCD_CLK__LCD_WR_RWN              0x1ac 0x4b4 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_CLK__EIM_RW                  0x1ac 0x4b4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_CLK__PWM4_OUT                0x1ac 0x4b4 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_CLK__GPIO2_IO15              0x1ac 0x4b4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT0__LCD_DATA00             0x1b0 0x4b8 0x778 0x0 0x1
-#define MX6SL_PAD_LCD_DAT0__ECSPI1_MOSI            0x1b0 0x4b8 0x688 0x1 0x1
-#define MX6SL_PAD_LCD_DAT0__USB_OTG2_ID            0x1b0 0x4b8 0x5e0 0x2 0x1
-#define MX6SL_PAD_LCD_DAT0__PWM1_OUT               0x1b0 0x4b8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT0__UART5_DTR_B            0x1b0 0x4b8 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT0__GPIO2_IO20             0x1b0 0x4b8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT0__ARM_TRACE00            0x1b0 0x4b8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT0__SRC_BOOT_CFG00         0x1b0 0x4b8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT1__LCD_DATA01             0x1b4 0x4bc 0x77c 0x0 0x1
-#define MX6SL_PAD_LCD_DAT1__ECSPI1_MISO            0x1b4 0x4bc 0x684 0x1 0x1
-#define MX6SL_PAD_LCD_DAT1__USB_OTG1_ID            0x1b4 0x4bc 0x5dc 0x2 0x2
-#define MX6SL_PAD_LCD_DAT1__PWM2_OUT               0x1b4 0x4bc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT1__AUD4_RXFS              0x1b4 0x4bc 0x5f0 0x4 0x1
-#define MX6SL_PAD_LCD_DAT1__GPIO2_IO21             0x1b4 0x4bc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT1__ARM_TRACE01            0x1b4 0x4bc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT1__SRC_BOOT_CFG01         0x1b4 0x4bc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT10__LCD_DATA10            0x1b8 0x4c0 0x7a0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT10__KEY_COL1              0x1b8 0x4c0 0x738 0x1 0x1
-#define MX6SL_PAD_LCD_DAT10__CSI_DATA07            0x1b8 0x4c0 0x64c 0x2 0x1
-#define MX6SL_PAD_LCD_DAT10__EIM_DATA04            0x1b8 0x4c0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT10__ECSPI2_MISO           0x1b8 0x4c0 0x6a0 0x4 0x2
-#define MX6SL_PAD_LCD_DAT10__GPIO2_IO30            0x1b8 0x4c0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT10__ARM_TRACE10           0x1b8 0x4c0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT10__SRC_BOOT_CFG10        0x1b8 0x4c0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT11__LCD_DATA11            0x1bc 0x4c4 0x7a4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT11__KEY_ROW1              0x1bc 0x4c4 0x758 0x1 0x1
-#define MX6SL_PAD_LCD_DAT11__CSI_DATA06            0x1bc 0x4c4 0x648 0x2 0x1
-#define MX6SL_PAD_LCD_DAT11__EIM_DATA05            0x1bc 0x4c4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT11__ECSPI2_SS1            0x1bc 0x4c4 0x6ac 0x4 0x1
-#define MX6SL_PAD_LCD_DAT11__GPIO2_IO31            0x1bc 0x4c4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT11__ARM_TRACE11           0x1bc 0x4c4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT11__SRC_BOOT_CFG11        0x1bc 0x4c4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT12__LCD_DATA12            0x1c0 0x4c8 0x7a8 0x0 0x1
-#define MX6SL_PAD_LCD_DAT12__KEY_COL2              0x1c0 0x4c8 0x73c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT12__CSI_DATA05            0x1c0 0x4c8 0x644 0x2 0x1
-#define MX6SL_PAD_LCD_DAT12__EIM_DATA06            0x1c0 0x4c8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT12__UART5_RTS_B           0x1c0 0x4c8 0x818 0x4 0x2
-#define MX6SL_PAD_LCD_DAT12__UART5_CTS_B           0x1c0 0x4c8 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT12__GPIO3_IO00            0x1c0 0x4c8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT12__ARM_TRACE12           0x1c0 0x4c8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT12__SRC_BOOT_CFG12        0x1c0 0x4c8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT13__LCD_DATA13            0x1c4 0x4cc 0x7ac 0x0 0x1
-#define MX6SL_PAD_LCD_DAT13__KEY_ROW2              0x1c4 0x4cc 0x75c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT13__CSI_DATA04            0x1c4 0x4cc 0x640 0x2 0x1
-#define MX6SL_PAD_LCD_DAT13__EIM_DATA07            0x1c4 0x4cc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT13__UART5_CTS_B           0x1c4 0x4cc 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT13__UART5_RTS_B           0x1c4 0x4cc 0x818 0x4 0x3
-#define MX6SL_PAD_LCD_DAT13__GPIO3_IO01            0x1c4 0x4cc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT13__ARM_TRACE13           0x1c4 0x4cc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT13__SRC_BOOT_CFG13        0x1c4 0x4cc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT14__LCD_DATA14            0x1c8 0x4d0 0x7b0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT14__KEY_COL3              0x1c8 0x4d0 0x740 0x1 0x1
-#define MX6SL_PAD_LCD_DAT14__CSI_DATA03            0x1c8 0x4d0 0x63c 0x2 0x1
-#define MX6SL_PAD_LCD_DAT14__EIM_DATA08            0x1c8 0x4d0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT14__UART5_RX_DATA         0x1c8 0x4d0 0x81c 0x4 0x2
-#define MX6SL_PAD_LCD_DAT14__UART5_TX_DATA         0x1c8 0x4d0 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT14__GPIO3_IO02            0x1c8 0x4d0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT14__ARM_TRACE14           0x1c8 0x4d0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT14__SRC_BOOT_CFG14        0x1c8 0x4d0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT15__LCD_DATA15            0x1cc 0x4d4 0x7b4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT15__KEY_ROW3              0x1cc 0x4d4 0x760 0x1 0x1
-#define MX6SL_PAD_LCD_DAT15__CSI_DATA02            0x1cc 0x4d4 0x638 0x2 0x1
-#define MX6SL_PAD_LCD_DAT15__EIM_DATA09            0x1cc 0x4d4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT15__UART5_TX_DATA         0x1cc 0x4d4 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT15__UART5_RX_DATA         0x1cc 0x4d4 0x81c 0x4 0x3
-#define MX6SL_PAD_LCD_DAT15__GPIO3_IO03            0x1cc 0x4d4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT15__ARM_TRACE15           0x1cc 0x4d4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT15__SRC_BOOT_CFG15        0x1cc 0x4d4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT16__LCD_DATA16            0x1d0 0x4d8 0x7b8 0x0 0x1
-#define MX6SL_PAD_LCD_DAT16__KEY_COL4              0x1d0 0x4d8 0x744 0x1 0x1
-#define MX6SL_PAD_LCD_DAT16__CSI_DATA01            0x1d0 0x4d8 0x634 0x2 0x1
-#define MX6SL_PAD_LCD_DAT16__EIM_DATA10            0x1d0 0x4d8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT16__I2C2_SCL              0x1d0 0x4d8 0x724 0x4 0x3
-#define MX6SL_PAD_LCD_DAT16__GPIO3_IO04            0x1d0 0x4d8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT16__ARM_TRACE16           0x1d0 0x4d8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT16__SRC_BOOT_CFG24        0x1d0 0x4d8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT17__LCD_DATA17            0x1d4 0x4dc 0x7bc 0x0 0x1
-#define MX6SL_PAD_LCD_DAT17__KEY_ROW4              0x1d4 0x4dc 0x764 0x1 0x1
-#define MX6SL_PAD_LCD_DAT17__CSI_DATA00            0x1d4 0x4dc 0x630 0x2 0x1
-#define MX6SL_PAD_LCD_DAT17__EIM_DATA11            0x1d4 0x4dc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT17__I2C2_SDA              0x1d4 0x4dc 0x728 0x4 0x3
-#define MX6SL_PAD_LCD_DAT17__GPIO3_IO05            0x1d4 0x4dc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT17__ARM_TRACE17           0x1d4 0x4dc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT17__SRC_BOOT_CFG25        0x1d4 0x4dc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT18__LCD_DATA18            0x1d8 0x4e0 0x7c0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT18__KEY_COL5              0x1d8 0x4e0 0x748 0x1 0x1
-#define MX6SL_PAD_LCD_DAT18__CSI_DATA15            0x1d8 0x4e0 0x66c 0x2 0x0
-#define MX6SL_PAD_LCD_DAT18__EIM_DATA12            0x1d8 0x4e0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT18__GPT_CAPTURE1          0x1d8 0x4e0 0x710 0x4 0x1
-#define MX6SL_PAD_LCD_DAT18__GPIO3_IO06            0x1d8 0x4e0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT18__ARM_TRACE18           0x1d8 0x4e0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT18__SRC_BOOT_CFG26        0x1d8 0x4e0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT19__LCD_DATA19            0x1dc 0x4e4 0x7c4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT19__KEY_ROW5              0x1dc 0x4e4 0x768 0x1 0x1
-#define MX6SL_PAD_LCD_DAT19__CSI_DATA14            0x1dc 0x4e4 0x668 0x2 0x0
-#define MX6SL_PAD_LCD_DAT19__EIM_DATA13            0x1dc 0x4e4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT19__GPT_CAPTURE2          0x1dc 0x4e4 0x714 0x4 0x1
-#define MX6SL_PAD_LCD_DAT19__GPIO3_IO07            0x1dc 0x4e4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT19__ARM_TRACE19           0x1dc 0x4e4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT19__SRC_BOOT_CFG27        0x1dc 0x4e4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT2__LCD_DATA02             0x1e0 0x4e8 0x780 0x0 0x1
-#define MX6SL_PAD_LCD_DAT2__ECSPI1_SS0             0x1e0 0x4e8 0x68c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT2__EPIT2_OUT              0x1e0 0x4e8 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_DAT2__PWM3_OUT               0x1e0 0x4e8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT2__AUD4_RXC               0x1e0 0x4e8 0x5ec 0x4 0x1
-#define MX6SL_PAD_LCD_DAT2__GPIO2_IO22             0x1e0 0x4e8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT2__ARM_TRACE02            0x1e0 0x4e8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT2__SRC_BOOT_CFG02         0x1e0 0x4e8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT20__LCD_DATA20            0x1e4 0x4ec 0x7c8 0x0 0x1
-#define MX6SL_PAD_LCD_DAT20__KEY_COL6              0x1e4 0x4ec 0x74c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT20__CSI_DATA13            0x1e4 0x4ec 0x664 0x2 0x0
-#define MX6SL_PAD_LCD_DAT20__EIM_DATA14            0x1e4 0x4ec 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT20__GPT_COMPARE1          0x1e4 0x4ec 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT20__GPIO3_IO08            0x1e4 0x4ec 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT20__ARM_TRACE20           0x1e4 0x4ec 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT20__SRC_BOOT_CFG28        0x1e4 0x4ec 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT21__LCD_DATA21            0x1e8 0x4f0 0x7cc 0x0 0x1
-#define MX6SL_PAD_LCD_DAT21__KEY_ROW6              0x1e8 0x4f0 0x76c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT21__CSI_DATA12            0x1e8 0x4f0 0x660 0x2 0x0
-#define MX6SL_PAD_LCD_DAT21__EIM_DATA15            0x1e8 0x4f0 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT21__GPT_COMPARE2          0x1e8 0x4f0 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT21__GPIO3_IO09            0x1e8 0x4f0 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT21__ARM_TRACE21           0x1e8 0x4f0 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT21__SRC_BOOT_CFG29        0x1e8 0x4f0 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT22__LCD_DATA22            0x1ec 0x4f4 0x7d0 0x0 0x1
-#define MX6SL_PAD_LCD_DAT22__KEY_COL7              0x1ec 0x4f4 0x750 0x1 0x1
-#define MX6SL_PAD_LCD_DAT22__CSI_DATA11            0x1ec 0x4f4 0x65c 0x2 0x1
-#define MX6SL_PAD_LCD_DAT22__EIM_EB3_B             0x1ec 0x4f4 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT22__GPT_COMPARE3          0x1ec 0x4f4 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT22__GPIO3_IO10            0x1ec 0x4f4 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT22__ARM_TRACE22           0x1ec 0x4f4 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT22__SRC_BOOT_CFG30        0x1ec 0x4f4 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT23__LCD_DATA23            0x1f0 0x4f8 0x7d4 0x0 0x1
-#define MX6SL_PAD_LCD_DAT23__KEY_ROW7              0x1f0 0x4f8 0x770 0x1 0x1
-#define MX6SL_PAD_LCD_DAT23__CSI_DATA10            0x1f0 0x4f8 0x658 0x2 0x1
-#define MX6SL_PAD_LCD_DAT23__EIM_EB2_B             0x1f0 0x4f8 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT23__GPT_CLKIN             0x1f0 0x4f8 0x718 0x4 0x1
-#define MX6SL_PAD_LCD_DAT23__GPIO3_IO11            0x1f0 0x4f8 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT23__ARM_TRACE23           0x1f0 0x4f8 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT23__SRC_BOOT_CFG31        0x1f0 0x4f8 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT3__LCD_DATA03             0x1f4 0x4fc 0x784 0x0 0x1
-#define MX6SL_PAD_LCD_DAT3__ECSPI1_SCLK            0x1f4 0x4fc 0x67c 0x1 0x1
-#define MX6SL_PAD_LCD_DAT3__UART5_DSR_B            0x1f4 0x4fc 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_DAT3__PWM4_OUT               0x1f4 0x4fc 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT3__AUD4_RXD               0x1f4 0x4fc 0x5e4 0x4 0x1
-#define MX6SL_PAD_LCD_DAT3__GPIO2_IO23             0x1f4 0x4fc 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT3__ARM_TRACE03            0x1f4 0x4fc 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT3__SRC_BOOT_CFG03         0x1f4 0x4fc 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT4__LCD_DATA04             0x1f8 0x500 0x788 0x0 0x1
-#define MX6SL_PAD_LCD_DAT4__ECSPI1_SS1             0x1f8 0x500 0x690 0x1 0x1
-#define MX6SL_PAD_LCD_DAT4__CSI_VSYNC              0x1f8 0x500 0x678 0x2 0x2
-#define MX6SL_PAD_LCD_DAT4__WDOG2_RESET_B_DEB      0x1f8 0x500 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT4__AUD4_TXC               0x1f8 0x500 0x5f4 0x4 0x1
-#define MX6SL_PAD_LCD_DAT4__GPIO2_IO24             0x1f8 0x500 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT4__ARM_TRACE04            0x1f8 0x500 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT4__SRC_BOOT_CFG04         0x1f8 0x500 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT5__LCD_DATA05             0x1fc 0x504 0x78c 0x0 0x1
-#define MX6SL_PAD_LCD_DAT5__ECSPI1_SS2             0x1fc 0x504 0x694 0x1 0x1
-#define MX6SL_PAD_LCD_DAT5__CSI_HSYNC              0x1fc 0x504 0x670 0x2 0x2
-#define MX6SL_PAD_LCD_DAT5__EIM_CS3_B              0x1fc 0x504 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT5__AUD4_TXFS              0x1fc 0x504 0x5f8 0x4 0x1
-#define MX6SL_PAD_LCD_DAT5__GPIO2_IO25             0x1fc 0x504 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT5__ARM_TRACE05            0x1fc 0x504 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT5__SRC_BOOT_CFG05         0x1fc 0x504 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT6__LCD_DATA06             0x200 0x508 0x790 0x0 0x1
-#define MX6SL_PAD_LCD_DAT6__ECSPI1_SS3             0x200 0x508 0x698 0x1 0x1
-#define MX6SL_PAD_LCD_DAT6__CSI_PIXCLK             0x200 0x508 0x674 0x2 0x2
-#define MX6SL_PAD_LCD_DAT6__EIM_DATA00             0x200 0x508 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT6__AUD4_TXD               0x200 0x508 0x5e8 0x4 0x1
-#define MX6SL_PAD_LCD_DAT6__GPIO2_IO26             0x200 0x508 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT6__ARM_TRACE06            0x200 0x508 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT6__SRC_BOOT_CFG06         0x200 0x508 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT7__LCD_DATA07             0x204 0x50c 0x794 0x0 0x1
-#define MX6SL_PAD_LCD_DAT7__ECSPI1_RDY             0x204 0x50c 0x680 0x1 0x1
-#define MX6SL_PAD_LCD_DAT7__CSI_MCLK               0x204 0x50c 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_DAT7__EIM_DATA01             0x204 0x50c 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT7__AUDIO_CLK_OUT          0x204 0x50c 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_DAT7__GPIO2_IO27             0x204 0x50c 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT7__ARM_TRACE07            0x204 0x50c 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT7__SRC_BOOT_CFG07         0x204 0x50c 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT8__LCD_DATA08             0x208 0x510 0x798 0x0 0x1
-#define MX6SL_PAD_LCD_DAT8__KEY_COL0               0x208 0x510 0x734 0x1 0x1
-#define MX6SL_PAD_LCD_DAT8__CSI_DATA09             0x208 0x510 0x654 0x2 0x1
-#define MX6SL_PAD_LCD_DAT8__EIM_DATA02             0x208 0x510 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT8__ECSPI2_SCLK            0x208 0x510 0x69c 0x4 0x2
-#define MX6SL_PAD_LCD_DAT8__GPIO2_IO28             0x208 0x510 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT8__ARM_TRACE08            0x208 0x510 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT8__SRC_BOOT_CFG08         0x208 0x510 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_DAT9__LCD_DATA09             0x20c 0x514 0x79c 0x0 0x1
-#define MX6SL_PAD_LCD_DAT9__KEY_ROW0               0x20c 0x514 0x754 0x1 0x1
-#define MX6SL_PAD_LCD_DAT9__CSI_DATA08             0x20c 0x514 0x650 0x2 0x1
-#define MX6SL_PAD_LCD_DAT9__EIM_DATA03             0x20c 0x514 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_DAT9__ECSPI2_MOSI            0x20c 0x514 0x6a4 0x4 0x2
-#define MX6SL_PAD_LCD_DAT9__GPIO2_IO29             0x20c 0x514 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_DAT9__ARM_TRACE09            0x20c 0x514 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_DAT9__SRC_BOOT_CFG09         0x20c 0x514 0x000 0x7 0x0
-#define MX6SL_PAD_LCD_ENABLE__LCD_ENABLE           0x210 0x518 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_ENABLE__SD4_DATA5            0x210 0x518 0x870 0x1 0x2
-#define MX6SL_PAD_LCD_ENABLE__LCD_RD_E             0x210 0x518 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_ENABLE__EIM_OE_B             0x210 0x518 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_ENABLE__UART2_RX_DATA        0x210 0x518 0x804 0x4 0x2
-#define MX6SL_PAD_LCD_ENABLE__UART2_TX_DATA        0x210 0x518 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_ENABLE__GPIO2_IO16           0x210 0x518 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_HSYNC__LCD_HSYNC             0x214 0x51c 0x774 0x0 0x0
-#define MX6SL_PAD_LCD_HSYNC__SD4_DATA6             0x214 0x51c 0x874 0x1 0x2
-#define MX6SL_PAD_LCD_HSYNC__LCD_CS                0x214 0x51c 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_HSYNC__EIM_CS0_B             0x214 0x51c 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_HSYNC__UART2_TX_DATA         0x214 0x51c 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_HSYNC__UART2_RX_DATA         0x214 0x51c 0x804 0x4 0x3
-#define MX6SL_PAD_LCD_HSYNC__GPIO2_IO17            0x214 0x51c 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_HSYNC__ARM_TRACE_CLK         0x214 0x51c 0x000 0x6 0x0
-#define MX6SL_PAD_LCD_RESET__LCD_RESET             0x218 0x520 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_RESET__EIM_DTACK_B           0x218 0x520 0x880 0x1 0x1
-#define MX6SL_PAD_LCD_RESET__LCD_BUSY              0x218 0x520 0x774 0x2 0x1
-#define MX6SL_PAD_LCD_RESET__EIM_WAIT_B            0x218 0x520 0x884 0x3 0x1
-#define MX6SL_PAD_LCD_RESET__UART2_CTS_B           0x218 0x520 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_RESET__UART2_RTS_B           0x218 0x520 0x800 0x4 0x2
-#define MX6SL_PAD_LCD_RESET__GPIO2_IO19            0x218 0x520 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_RESET__CCM_PMIC_READY        0x218 0x520 0x62c 0x6 0x1
-#define MX6SL_PAD_LCD_VSYNC__LCD_VSYNC             0x21c 0x524 0x000 0x0 0x0
-#define MX6SL_PAD_LCD_VSYNC__SD4_DATA7             0x21c 0x524 0x878 0x1 0x2
-#define MX6SL_PAD_LCD_VSYNC__LCD_RS                0x21c 0x524 0x000 0x2 0x0
-#define MX6SL_PAD_LCD_VSYNC__EIM_CS1_B             0x21c 0x524 0x000 0x3 0x0
-#define MX6SL_PAD_LCD_VSYNC__UART2_RTS_B           0x21c 0x524 0x800 0x4 0x3
-#define MX6SL_PAD_LCD_VSYNC__UART2_CTS_B           0x21c 0x524 0x000 0x4 0x0
-#define MX6SL_PAD_LCD_VSYNC__GPIO2_IO18            0x21c 0x524 0x000 0x5 0x0
-#define MX6SL_PAD_LCD_VSYNC__ARM_TRACE_CTL         0x21c 0x524 0x000 0x6 0x0
-#define MX6SL_PAD_PWM1__PWM1_OUT                   0x220 0x528 0x000 0x0 0x0
-#define MX6SL_PAD_PWM1__CCM_CLKO                   0x220 0x528 0x000 0x1 0x0
-#define MX6SL_PAD_PWM1__AUDIO_CLK_OUT              0x220 0x528 0x000 0x2 0x0
-#define MX6SL_PAD_PWM1__FEC_REF_OUT                0x220 0x528 0x000 0x3 0x0
-#define MX6SL_PAD_PWM1__CSI_MCLK                   0x220 0x528 0x000 0x4 0x0
-#define MX6SL_PAD_PWM1__GPIO3_IO23                 0x220 0x528 0x000 0x5 0x0
-#define MX6SL_PAD_PWM1__EPIT1_OUT                  0x220 0x528 0x000 0x6 0x0
-#define MX6SL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x224 0x52c 0x000 0x0 0x0
-#define MX6SL_PAD_REF_CLK_24M__I2C3_SCL            0x224 0x52c 0x72c 0x1 0x2
-#define MX6SL_PAD_REF_CLK_24M__PWM3_OUT            0x224 0x52c 0x000 0x2 0x0
-#define MX6SL_PAD_REF_CLK_24M__USB_OTG2_ID         0x224 0x52c 0x5e0 0x3 0x2
-#define MX6SL_PAD_REF_CLK_24M__CCM_PMIC_READY      0x224 0x52c 0x62c 0x4 0x2
-#define MX6SL_PAD_REF_CLK_24M__GPIO3_IO21          0x224 0x52c 0x000 0x5 0x0
-#define MX6SL_PAD_REF_CLK_24M__SD3_WP              0x224 0x52c 0x84c 0x6 0x3
-#define MX6SL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x228 0x530 0x000 0x0 0x0
-#define MX6SL_PAD_REF_CLK_32K__I2C3_SDA            0x228 0x530 0x730 0x1 0x2
-#define MX6SL_PAD_REF_CLK_32K__PWM4_OUT            0x228 0x530 0x000 0x2 0x0
-#define MX6SL_PAD_REF_CLK_32K__USB_OTG1_ID         0x228 0x530 0x5dc 0x3 0x3
-#define MX6SL_PAD_REF_CLK_32K__SD1_LCTL            0x228 0x530 0x000 0x4 0x0
-#define MX6SL_PAD_REF_CLK_32K__GPIO3_IO22          0x228 0x530 0x000 0x5 0x0
-#define MX6SL_PAD_REF_CLK_32K__SD3_CD_B            0x228 0x530 0x838 0x6 0x3
-#define MX6SL_PAD_SD1_CLK__SD1_CLK                 0x22c 0x534 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_CLK__FEC_MDIO                0x22c 0x534 0x6f4 0x1 0x2
-#define MX6SL_PAD_SD1_CLK__KEY_COL0                0x22c 0x534 0x734 0x2 0x2
-#define MX6SL_PAD_SD1_CLK__EPDC_SDCE4              0x22c 0x534 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_CLK__GPIO5_IO15              0x22c 0x534 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_CMD__SD1_CMD                 0x230 0x538 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_CMD__FEC_TX_CLK              0x230 0x538 0x70c 0x1 0x2
-#define MX6SL_PAD_SD1_CMD__KEY_ROW0                0x230 0x538 0x754 0x2 0x2
-#define MX6SL_PAD_SD1_CMD__EPDC_SDCE5              0x230 0x538 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_CMD__GPIO5_IO14              0x230 0x538 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT0__SD1_DATA0              0x234 0x53c 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT0__FEC_RX_ER              0x234 0x53c 0x708 0x1 0x2
-#define MX6SL_PAD_SD1_DAT0__KEY_COL1               0x234 0x53c 0x738 0x2 0x2
-#define MX6SL_PAD_SD1_DAT0__EPDC_SDCE6             0x234 0x53c 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT0__GPIO5_IO11             0x234 0x53c 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT1__SD1_DATA1              0x238 0x540 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT1__FEC_RX_DV              0x238 0x540 0x704 0x1 0x2
-#define MX6SL_PAD_SD1_DAT1__KEY_ROW1               0x238 0x540 0x758 0x2 0x2
-#define MX6SL_PAD_SD1_DAT1__EPDC_SDCE7             0x238 0x540 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT1__GPIO5_IO08             0x238 0x540 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT2__SD1_DATA2              0x23c 0x544 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT2__FEC_RX_DATA1           0x23c 0x544 0x6fc 0x1 0x2
-#define MX6SL_PAD_SD1_DAT2__KEY_COL2               0x23c 0x544 0x73c 0x2 0x2
-#define MX6SL_PAD_SD1_DAT2__EPDC_SDCE8             0x23c 0x544 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT2__GPIO5_IO13             0x23c 0x544 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT3__SD1_DATA3              0x240 0x548 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT3__FEC_TX_DATA0           0x240 0x548 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT3__KEY_ROW2               0x240 0x548 0x75c 0x2 0x2
-#define MX6SL_PAD_SD1_DAT3__EPDC_SDCE9             0x240 0x548 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT3__GPIO5_IO06             0x240 0x548 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT4__SD1_DATA4              0x244 0x54c 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT4__FEC_MDC                0x244 0x54c 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT4__KEY_COL3               0x244 0x54c 0x740 0x2 0x2
-#define MX6SL_PAD_SD1_DAT4__EPDC_SDCLK_N           0x244 0x54c 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT4__UART4_RX_DATA          0x244 0x54c 0x814 0x4 0x4
-#define MX6SL_PAD_SD1_DAT4__UART4_TX_DATA          0x244 0x54c 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT4__GPIO5_IO12             0x244 0x54c 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT5__SD1_DATA5              0x248 0x550 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT5__FEC_RX_DATA0           0x248 0x550 0x6f8 0x1 0x2
-#define MX6SL_PAD_SD1_DAT5__KEY_ROW3               0x248 0x550 0x760 0x2 0x2
-#define MX6SL_PAD_SD1_DAT5__EPDC_SDOED             0x248 0x550 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT5__UART4_TX_DATA          0x248 0x550 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT5__UART4_RX_DATA          0x248 0x550 0x814 0x4 0x5
-#define MX6SL_PAD_SD1_DAT5__GPIO5_IO09             0x248 0x550 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT6__SD1_DATA6              0x24c 0x554 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT6__FEC_TX_EN              0x24c 0x554 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT6__KEY_COL4               0x24c 0x554 0x744 0x2 0x2
-#define MX6SL_PAD_SD1_DAT6__EPDC_SDOEZ             0x24c 0x554 0x000 0x3 0x0
-#define MX6SL_PAD_SD1_DAT6__UART4_RTS_B            0x24c 0x554 0x810 0x4 0x4
-#define MX6SL_PAD_SD1_DAT6__UART4_CTS_B            0x24c 0x554 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT6__GPIO5_IO07             0x24c 0x554 0x000 0x5 0x0
-#define MX6SL_PAD_SD1_DAT7__SD1_DATA7              0x250 0x558 0x000 0x0 0x0
-#define MX6SL_PAD_SD1_DAT7__FEC_TX_DATA1           0x250 0x558 0x000 0x1 0x0
-#define MX6SL_PAD_SD1_DAT7__KEY_ROW4               0x250 0x558 0x764 0x2 0x2
-#define MX6SL_PAD_SD1_DAT7__CCM_PMIC_READY         0x250 0x558 0x62c 0x3 0x3
-#define MX6SL_PAD_SD1_DAT7__UART4_CTS_B            0x250 0x558 0x000 0x4 0x0
-#define MX6SL_PAD_SD1_DAT7__UART4_RTS_B            0x250 0x558 0x810 0x4 0x5
-#define MX6SL_PAD_SD1_DAT7__GPIO5_IO10             0x250 0x558 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_CLK__SD2_CLK                 0x254 0x55c 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_CLK__AUD4_RXFS               0x254 0x55c 0x5f0 0x1 0x2
-#define MX6SL_PAD_SD2_CLK__ECSPI3_SCLK             0x254 0x55c 0x6b0 0x2 0x2
-#define MX6SL_PAD_SD2_CLK__CSI_DATA00              0x254 0x55c 0x630 0x3 0x2
-#define MX6SL_PAD_SD2_CLK__GPIO5_IO05              0x254 0x55c 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_CMD__SD2_CMD                 0x258 0x560 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_CMD__AUD4_RXC                0x258 0x560 0x5ec 0x1 0x2
-#define MX6SL_PAD_SD2_CMD__ECSPI3_SS0              0x258 0x560 0x6c0 0x2 0x2
-#define MX6SL_PAD_SD2_CMD__CSI_DATA01              0x258 0x560 0x634 0x3 0x2
-#define MX6SL_PAD_SD2_CMD__EPIT1_OUT               0x258 0x560 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_CMD__GPIO5_IO04              0x258 0x560 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT0__SD2_DATA0              0x25c 0x564 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT0__AUD4_RXD               0x25c 0x564 0x5e4 0x1 0x2
-#define MX6SL_PAD_SD2_DAT0__ECSPI3_MOSI            0x25c 0x564 0x6bc 0x2 0x2
-#define MX6SL_PAD_SD2_DAT0__CSI_DATA02             0x25c 0x564 0x638 0x3 0x2
-#define MX6SL_PAD_SD2_DAT0__UART5_RTS_B            0x25c 0x564 0x818 0x4 0x4
-#define MX6SL_PAD_SD2_DAT0__UART5_CTS_B            0x25c 0x564 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT0__GPIO5_IO01             0x25c 0x564 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT1__SD2_DATA1              0x260 0x568 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT1__AUD4_TXC               0x260 0x568 0x5f4 0x1 0x2
-#define MX6SL_PAD_SD2_DAT1__ECSPI3_MISO            0x260 0x568 0x6b8 0x2 0x2
-#define MX6SL_PAD_SD2_DAT1__CSI_DATA03             0x260 0x568 0x63c 0x3 0x2
-#define MX6SL_PAD_SD2_DAT1__UART5_CTS_B            0x260 0x568 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT1__UART5_RTS_B            0x260 0x568 0x818 0x4 0x5
-#define MX6SL_PAD_SD2_DAT1__GPIO4_IO30             0x260 0x568 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT2__SD2_DATA2              0x264 0x56c 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT2__AUD4_TXFS              0x264 0x56c 0x5f8 0x1 0x2
-#define MX6SL_PAD_SD2_DAT2__FEC_COL                0x264 0x56c 0x6f0 0x2 0x1
-#define MX6SL_PAD_SD2_DAT2__CSI_DATA04             0x264 0x56c 0x640 0x3 0x2
-#define MX6SL_PAD_SD2_DAT2__UART5_RX_DATA          0x264 0x56c 0x81c 0x4 0x4
-#define MX6SL_PAD_SD2_DAT2__UART5_TX_DATA          0x264 0x56c 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT2__GPIO5_IO03             0x264 0x56c 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT3__SD2_DATA3              0x268 0x570 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT3__AUD4_TXD               0x268 0x570 0x5e8 0x1 0x2
-#define MX6SL_PAD_SD2_DAT3__FEC_RX_CLK             0x268 0x570 0x700 0x2 0x1
-#define MX6SL_PAD_SD2_DAT3__CSI_DATA05             0x268 0x570 0x644 0x3 0x2
-#define MX6SL_PAD_SD2_DAT3__UART5_TX_DATA          0x268 0x570 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT3__UART5_RX_DATA          0x268 0x570 0x81c 0x4 0x5
-#define MX6SL_PAD_SD2_DAT3__GPIO4_IO28             0x268 0x570 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT4__SD2_DATA4              0x26c 0x574 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT4__SD3_DATA4              0x26c 0x574 0x83c 0x1 0x1
-#define MX6SL_PAD_SD2_DAT4__UART2_RX_DATA          0x26c 0x574 0x804 0x2 0x4
-#define MX6SL_PAD_SD2_DAT4__UART2_TX_DATA          0x26c 0x574 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT4__CSI_DATA06             0x26c 0x574 0x648 0x3 0x2
-#define MX6SL_PAD_SD2_DAT4__SPDIF_OUT              0x26c 0x574 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_DAT4__GPIO5_IO02             0x26c 0x574 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT5__SD2_DATA5              0x270 0x578 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT5__SD3_DATA5              0x270 0x578 0x840 0x1 0x1
-#define MX6SL_PAD_SD2_DAT5__UART2_TX_DATA          0x270 0x578 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT5__UART2_RX_DATA          0x270 0x578 0x804 0x2 0x5
-#define MX6SL_PAD_SD2_DAT5__CSI_DATA07             0x270 0x578 0x64c 0x3 0x2
-#define MX6SL_PAD_SD2_DAT5__SPDIF_IN               0x270 0x578 0x7f0 0x4 0x2
-#define MX6SL_PAD_SD2_DAT5__GPIO4_IO31             0x270 0x578 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT6__SD2_DATA6              0x274 0x57c 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT6__SD3_DATA6              0x274 0x57c 0x844 0x1 0x1
-#define MX6SL_PAD_SD2_DAT6__UART2_RTS_B            0x274 0x57c 0x800 0x2 0x4
-#define MX6SL_PAD_SD2_DAT6__UART2_CTS_B            0x274 0x57c 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT6__CSI_DATA08             0x274 0x57c 0x650 0x3 0x2
-#define MX6SL_PAD_SD2_DAT6__SD2_WP                 0x274 0x57c 0x834 0x4 0x2
-#define MX6SL_PAD_SD2_DAT6__GPIO4_IO29             0x274 0x57c 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_DAT7__SD2_DATA7              0x278 0x580 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_DAT7__SD3_DATA7              0x278 0x580 0x848 0x1 0x1
-#define MX6SL_PAD_SD2_DAT7__UART2_CTS_B            0x278 0x580 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_DAT7__UART2_RTS_B            0x278 0x580 0x800 0x2 0x5
-#define MX6SL_PAD_SD2_DAT7__CSI_DATA09             0x278 0x580 0x654 0x3 0x2
-#define MX6SL_PAD_SD2_DAT7__SD2_CD_B               0x278 0x580 0x830 0x4 0x2
-#define MX6SL_PAD_SD2_DAT7__GPIO5_IO00             0x278 0x580 0x000 0x5 0x0
-#define MX6SL_PAD_SD2_RST__SD2_RESET               0x27c 0x584 0x000 0x0 0x0
-#define MX6SL_PAD_SD2_RST__FEC_REF_OUT             0x27c 0x584 0x000 0x1 0x0
-#define MX6SL_PAD_SD2_RST__WDOG2_B                 0x27c 0x584 0x000 0x2 0x0
-#define MX6SL_PAD_SD2_RST__SPDIF_OUT               0x27c 0x584 0x000 0x3 0x0
-#define MX6SL_PAD_SD2_RST__CSI_MCLK                0x27c 0x584 0x000 0x4 0x0
-#define MX6SL_PAD_SD2_RST__GPIO4_IO27              0x27c 0x584 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_CLK__SD3_CLK                 0x280 0x588 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_CLK__AUD5_RXFS               0x280 0x588 0x608 0x1 0x1
-#define MX6SL_PAD_SD3_CLK__KEY_COL5                0x280 0x588 0x748 0x2 0x2
-#define MX6SL_PAD_SD3_CLK__CSI_DATA10              0x280 0x588 0x658 0x3 0x2
-#define MX6SL_PAD_SD3_CLK__WDOG1_RESET_B_DEB       0x280 0x588 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_CLK__GPIO5_IO18              0x280 0x588 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_CLK__USB_OTG1_PWR            0x280 0x588 0x000 0x6 0x0
-#define MX6SL_PAD_SD3_CMD__SD3_CMD                 0x284 0x58c 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_CMD__AUD5_RXC                0x284 0x58c 0x604 0x1 0x1
-#define MX6SL_PAD_SD3_CMD__KEY_ROW5                0x284 0x58c 0x768 0x2 0x2
-#define MX6SL_PAD_SD3_CMD__CSI_DATA11              0x284 0x58c 0x65c 0x3 0x2
-#define MX6SL_PAD_SD3_CMD__USB_OTG2_ID             0x284 0x58c 0x5e0 0x4 0x3
-#define MX6SL_PAD_SD3_CMD__GPIO5_IO21              0x284 0x58c 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_CMD__USB_OTG2_PWR            0x284 0x58c 0x000 0x6 0x0
-#define MX6SL_PAD_SD3_DAT0__SD3_DATA0              0x288 0x590 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT0__AUD5_RXD               0x288 0x590 0x5fc 0x1 0x1
-#define MX6SL_PAD_SD3_DAT0__KEY_COL6               0x288 0x590 0x74c 0x2 0x2
-#define MX6SL_PAD_SD3_DAT0__CSI_DATA12             0x288 0x590 0x660 0x3 0x1
-#define MX6SL_PAD_SD3_DAT0__USB_OTG1_ID            0x288 0x590 0x5dc 0x4 0x4
-#define MX6SL_PAD_SD3_DAT0__GPIO5_IO19             0x288 0x590 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT1__SD3_DATA1              0x28c 0x594 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT1__AUD5_TXC               0x28c 0x594 0x60c 0x1 0x1
-#define MX6SL_PAD_SD3_DAT1__KEY_ROW6               0x28c 0x594 0x76c 0x2 0x2
-#define MX6SL_PAD_SD3_DAT1__CSI_DATA13             0x28c 0x594 0x664 0x3 0x1
-#define MX6SL_PAD_SD3_DAT1__SD1_VSELECT            0x28c 0x594 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_DAT1__GPIO5_IO20             0x28c 0x594 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT1__JTAG_DE_B              0x28c 0x594 0x000 0x6 0x0
-#define MX6SL_PAD_SD3_DAT2__SD3_DATA2              0x290 0x598 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT2__AUD5_TXFS              0x290 0x598 0x610 0x1 0x1
-#define MX6SL_PAD_SD3_DAT2__KEY_COL7               0x290 0x598 0x750 0x2 0x2
-#define MX6SL_PAD_SD3_DAT2__CSI_DATA14             0x290 0x598 0x668 0x3 0x1
-#define MX6SL_PAD_SD3_DAT2__EPIT1_OUT              0x290 0x598 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_DAT2__GPIO5_IO16             0x290 0x598 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT2__USB_OTG2_OC            0x290 0x598 0x820 0x6 0x3
-#define MX6SL_PAD_SD3_DAT3__SD3_DATA3              0x294 0x59c 0x000 0x0 0x0
-#define MX6SL_PAD_SD3_DAT3__AUD5_TXD               0x294 0x59c 0x600 0x1 0x1
-#define MX6SL_PAD_SD3_DAT3__KEY_ROW7               0x294 0x59c 0x770 0x2 0x2
-#define MX6SL_PAD_SD3_DAT3__CSI_DATA15             0x294 0x59c 0x66c 0x3 0x1
-#define MX6SL_PAD_SD3_DAT3__EPIT2_OUT              0x294 0x59c 0x000 0x4 0x0
-#define MX6SL_PAD_SD3_DAT3__GPIO5_IO17             0x294 0x59c 0x000 0x5 0x0
-#define MX6SL_PAD_SD3_DAT3__USB_OTG1_OC            0x294 0x59c 0x824 0x6 0x2
-#define MX6SL_PAD_UART1_RXD__UART1_RX_DATA         0x298 0x5a0 0x7fc 0x0 0x0
-#define MX6SL_PAD_UART1_RXD__UART1_TX_DATA         0x298 0x5a0 0x000 0x0 0x0
-#define MX6SL_PAD_UART1_RXD__PWM1_OUT              0x298 0x5a0 0x000 0x1 0x0
-#define MX6SL_PAD_UART1_RXD__UART4_RX_DATA         0x298 0x5a0 0x814 0x2 0x6
-#define MX6SL_PAD_UART1_RXD__UART4_TX_DATA         0x298 0x5a0 0x000 0x2 0x0
-#define MX6SL_PAD_UART1_RXD__FEC_COL               0x298 0x5a0 0x6f0 0x3 0x2
-#define MX6SL_PAD_UART1_RXD__UART5_RX_DATA         0x298 0x5a0 0x81c 0x4 0x6
-#define MX6SL_PAD_UART1_RXD__UART5_TX_DATA         0x298 0x5a0 0x000 0x4 0x0
-#define MX6SL_PAD_UART1_RXD__GPIO3_IO16            0x298 0x5a0 0x000 0x5 0x0
-#define MX6SL_PAD_UART1_TXD__UART1_TX_DATA         0x29c 0x5a4 0x000 0x0 0x0
-#define MX6SL_PAD_UART1_TXD__UART1_RX_DATA         0x29c 0x5a4 0x7fc 0x0 0x1
-#define MX6SL_PAD_UART1_TXD__PWM2_OUT              0x29c 0x5a4 0x000 0x1 0x0
-#define MX6SL_PAD_UART1_TXD__UART4_TX_DATA         0x29c 0x5a4 0x000 0x2 0x0
-#define MX6SL_PAD_UART1_TXD__UART4_RX_DATA         0x29c 0x5a4 0x814 0x2 0x7
-#define MX6SL_PAD_UART1_TXD__FEC_RX_CLK            0x29c 0x5a4 0x700 0x3 0x2
-#define MX6SL_PAD_UART1_TXD__UART5_TX_DATA         0x29c 0x5a4 0x000 0x4 0x0
-#define MX6SL_PAD_UART1_TXD__UART5_RX_DATA         0x29c 0x5a4 0x81c 0x4 0x7
-#define MX6SL_PAD_UART1_TXD__GPIO3_IO17            0x29c 0x5a4 0x000 0x5 0x0
-#define MX6SL_PAD_UART1_TXD__UART5_DCD_B           0x29c 0x5a4 0x000 0x7 0x0
-#define MX6SL_PAD_WDOG_B__WDOG1_B                  0x2a0 0x5a8 0x000 0x0 0x0
-#define MX6SL_PAD_WDOG_B__WDOG1_RESET_B_DEB        0x2a0 0x5a8 0x000 0x1 0x0
-#define MX6SL_PAD_WDOG_B__UART5_RI_B               0x2a0 0x5a8 0x000 0x2 0x0
-#define MX6SL_PAD_WDOG_B__GPIO3_IO18               0x2a0 0x5a8 0x000 0x5 0x0
-
-#endif /* __DTS_IMX6SL_PINFUNC_H */
diff --git a/src/arm/imx6sx-pinfunc.h b/src/arm/imx6sx-pinfunc.h
deleted file mode 100644
index bb9c6b78cb97..000000000000
--- a/src/arm/imx6sx-pinfunc.h
+++ /dev/null
@@ -1,1544 +0,0 @@
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_IMX6SX_PINFUNC_H
-#define __DTS_IMX6SX_PINFUNC_H
-
-/*
- * The pin function ID is a tuple of
- * <mux_reg conf_reg input_reg mux_mode input_val>
- */
-#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL                            0x0014 0x035C 0x07A8 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT                      0x0014 0x035C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK                          0x0014 0x035C 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT                            0x0014 0x035C 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY                      0x0014 0x035C 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0                          0x0014 0x035C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5               0x0014 0x035C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1                           0x0014 0x035C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA                            0x0018 0x0360 0x07AC 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B                      0x0018 0x0360 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK                        0x0018 0x0360 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO01__CCM_STOP                            0x0018 0x0360 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B                        0x0018 0x0360 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1                          0x0018 0x0360 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL           0x0018 0x0360 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0                           0x0018 0x0360 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL                            0x001C 0x0364 0x07B0 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B                         0x001C 0x0364 0x0864 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK                           0x001C 0x0364 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK                     0x001C 0x0364 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B                        0x001C 0x0364 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2                          0x001C 0x0364 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B                        0x001C 0x0364 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO02__PHY_TDI                             0x001C 0x0364 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA                            0x0020 0x0368 0x07B4 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP                           0x0020 0x0368 0x0868 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M                   0x0020 0x0368 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK                     0x0020 0x0368 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B                        0x0020 0x0368 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3                          0x0020 0x0368 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP                        0x0020 0x0368 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO03__PHY_TCK                             0x0020 0x0368 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO04__UART1_RX                            0x0024 0x036C 0x0830 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO04__UART1_TX                            0x0024 0x036C 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B                      0x0024 0x036C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC                           0x0024 0x036C 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT                      0x0024 0x036C 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2                      0x0024 0x036C 0x076C 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4                          0x0024 0x036C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP                        0x0024 0x036C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO04__PHY_TMS                             0x0024 0x036C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO05__UART1_RX                            0x0028 0x0370 0x0830 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO05__UART1_TX                            0x0028 0x0370 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT                      0x0028 0x0370 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO                          0x0028 0x0370 0x0764 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                   0x0028 0x0370 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1                      0x0028 0x0370 0x0760 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5                          0x0028 0x0370 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK                      0x0028 0x0370 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO05__PHY_TDO                             0x0028 0x0370 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART2_RX                            0x002C 0x0374 0x0838 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART2_TX                            0x002C 0x0374 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B                         0x002C 0x0374 0x086C 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC                           0x002C 0x0374 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK                           0x002C 0x0374 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B                         0x002C 0x0374 0x082C 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6                          0x002C 0x0374 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                    0x002C 0x0374 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED     0x002C 0x0374 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART2_RX                            0x0030 0x0378 0x0838 0x0 0x1
-#define MX6SX_PAD_GPIO1_IO07__UART2_TX                            0x0030 0x0378 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
-#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44                       0x0030 0x0378 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC                         0x0034 0x037C 0x0860 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B                        0x0034 0x037C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                    0x0034 0x037C 0x081C 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY                        0x0034 0x037C 0x069C 0x3 0x1
-#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B                         0x0034 0x037C 0x0834 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8                          0x0034 0x037C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                    0x0034 0x037C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT                           0x0034 0x037C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43                       0x0034 0x037C 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR                        0x0038 0x0380 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0000 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42                       0x0038 0x0380 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID                      0x003C 0x0384 0x0624 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK                       0x003C 0x0384 0x0828 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT                            0x003C 0x0384 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1                            0x003C 0x0384 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD                          0x003C 0x0384 0x070C 0x4 0x1
-#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10                         0x003C 0x0384 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB                     0x003C 0x0384 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3                   0x003C 0x0384 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41                       0x003C 0x0384 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC                         0x0040 0x0388 0x085C 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN                            0x0040 0x0388 0x0824 0x1 0x2
-#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT                            0x0040 0x0388 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1                           0x0040 0x0388 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO11__MLB_DATA                            0x0040 0x0388 0x07EC 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11                         0x0040 0x0388 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0                 0x0040 0x0388 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2                   0x0040 0x0388 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40                       0x0040 0x0388 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR                        0x0044 0x038C 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT                           0x0044 0x038C 0x0000 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT                            0x0044 0x038C 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2                           0x0044 0x038C 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO12__MLB_CLK                             0x0044 0x038C 0x07E8 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12                         0x0044 0x038C 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1                 0x0044 0x038C 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1                   0x0044 0x038C 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39                       0x0044 0x038C 0x0000 0x8 0x0
-#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY                      0x0048 0x0390 0x0000 0x0 0x0
-#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID                      0x0048 0x0390 0x0628 0x1 0x0
-#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT                            0x0048 0x0390 0x0000 0x2 0x0
-#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2                            0x0048 0x0390 0x0000 0x3 0x0
-#define MX6SX_PAD_GPIO1_IO13__MLB_SIG                             0x0048 0x0390 0x07F0 0x4 0x0
-#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13                         0x0048 0x0390 0x0000 0x5 0x0
-#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2                 0x0048 0x0390 0x0000 0x6 0x0
-#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0                   0x0048 0x0390 0x0000 0x7 0x0
-#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38                       0x0048 0x0390 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2                         0x004C 0x0394 0x06A8 0x0 0x0
-#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK                         0x004C 0x0394 0x078C 0x1 0x1
-#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC                     0x004C 0x0394 0x0684 0x2 0x1
-#define MX6SX_PAD_CSI_DATA00__I2C1_SCL                            0x004C 0x0394 0x07A8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA00__UART6_RI_B                          0x004C 0x0394 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14                         0x004C 0x0394 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23                        0x004C 0x0394 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK                        0x004C 0x0394 0x0800 0x7 0x0
-#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4                         0x004C 0x0394 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37                       0x004C 0x0394 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3                         0x0050 0x0398 0x06AC 0x0 0x0
-#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS                          0x0050 0x0398 0x077C 0x1 0x1
-#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS                    0x0050 0x0398 0x0688 0x2 0x1
-#define MX6SX_PAD_CSI_DATA01__I2C1_SDA                            0x0050 0x0398 0x07AC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B                         0x0050 0x0398 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15                         0x0050 0x0398 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22                        0x0050 0x0398 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC                        0x0050 0x0398 0x0804 0x7 0x0
-#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5                         0x0050 0x0398 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38                       0x0050 0x0398 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4                         0x0054 0x039C 0x06B0 0x0 0x0
-#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK                         0x0054 0x039C 0x0788 0x1 0x1
-#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC                     0x0054 0x039C 0x067C 0x2 0x1
-#define MX6SX_PAD_CSI_DATA02__KPP_COL_5                           0x0054 0x039C 0x07C8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B                         0x0054 0x039C 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16                         0x0054 0x039C 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21                        0x0054 0x039C 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK                        0x0054 0x039C 0x07F4 0x7 0x0
-#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6                         0x0054 0x039C 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39                       0x0054 0x039C 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5                         0x0058 0x03A0 0x06B4 0x0 0x0
-#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS                          0x0058 0x03A0 0x0778 0x1 0x1
-#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS                    0x0058 0x03A0 0x0680 0x2 0x1
-#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5                           0x0058 0x03A0 0x07D4 0x3 0x0
-#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B                         0x0058 0x03A0 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17                         0x0058 0x03A0 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20                        0x0058 0x03A0 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC                        0x0058 0x03A0 0x07FC 0x7 0x0
-#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7                         0x0058 0x03A0 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40                       0x0058 0x03A0 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6                         0x005C 0x03A4 0x06B8 0x0 0x0
-#define MX6SX_PAD_CSI_DATA04__ESAI_TX1                            0x005C 0x03A4 0x0794 0x1 0x1
-#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT                           0x005C 0x03A4 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_DATA04__KPP_COL_6                           0x005C 0x03A4 0x07CC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA04__UART6_RX                            0x005C 0x03A4 0x0858 0x4 0x0
-#define MX6SX_PAD_CSI_DATA04__UART6_TX                            0x005C 0x03A4 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18                         0x005C 0x03A4 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19                        0x005C 0x03A4 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA04__PWM5_OUT                            0x005C 0x03A4 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8                         0x005C 0x03A4 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41                       0x005C 0x03A4 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7                         0x0060 0x03A8 0x06BC 0x0 0x0
-#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1                        0x0060 0x03A8 0x07A0 0x1 0x1
-#define MX6SX_PAD_CSI_DATA05__SPDIF_IN                            0x0060 0x03A8 0x0824 0x2 0x1
-#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6                           0x0060 0x03A8 0x07D8 0x3 0x0
-#define MX6SX_PAD_CSI_DATA05__UART6_RX                            0x0060 0x03A8 0x0858 0x4 0x1
-#define MX6SX_PAD_CSI_DATA05__UART6_TX                            0x0060 0x03A8 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19                         0x0060 0x03A8 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18                        0x0060 0x03A8 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA05__PWM6_OUT                            0x0060 0x03A8 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9                         0x0060 0x03A8 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42                       0x0060 0x03A8 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8                         0x0064 0x03AC 0x06C0 0x0 0x0
-#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3                        0x0064 0x03AC 0x0798 0x1 0x1
-#define MX6SX_PAD_CSI_DATA06__I2C4_SCL                            0x0064 0x03AC 0x07C0 0x2 0x2
-#define MX6SX_PAD_CSI_DATA06__KPP_COL_7                           0x0064 0x03AC 0x07D0 0x3 0x0
-#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B                         0x0064 0x03AC 0x0854 0x4 0x0
-#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20                         0x0064 0x03AC 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17                        0x0064 0x03AC 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT                           0x0064 0x03AC 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10                        0x0064 0x03AC 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43                       0x0064 0x03AC 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9                         0x0068 0x03B0 0x06C4 0x0 0x0
-#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
-#define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
-#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
-#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11                        0x0068 0x03B0 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44                       0x0068 0x03B0 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC                           0x006C 0x03B4 0x0700 0x0 0x0
-#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0                             0x006C 0x03B4 0x0790 0x1 0x1
-#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                      0x006C 0x03B4 0x0678 0x2 0x1
-#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B                          0x006C 0x03B4 0x0844 0x3 0x2
-#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT                             0x006C 0x03B4 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22                          0x006C 0x03B4 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25                         0x006C 0x03B4 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0                       0x006C 0x03B4 0x0000 0x7 0x0
-#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2                          0x006C 0x03B4 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35                        0x006C 0x03B4 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK                             0x0070 0x03B8 0x0000 0x0 0x0
-#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK                        0x0070 0x03B8 0x0784 0x1 0x1
-#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT                        0x0070 0x03B8 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_MCLK__UART4_RX                              0x0070 0x03B8 0x0848 0x3 0x2
-#define MX6SX_PAD_CSI_MCLK__UART4_TX                              0x0070 0x03B8 0x0000 0x3 0x0
-#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT                        0x0070 0x03B8 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23                           0x0070 0x03B8 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26                          0x0070 0x03B8 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD                            0x0070 0x03B8 0x070C 0x7 0x0
-#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1                           0x0070 0x03B8 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34                         0x0070 0x03B8 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK                         0x0074 0x03BC 0x0704 0x0 0x0
-#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                      0x0074 0x03BC 0x0780 0x1 0x1
-#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK                         0x0074 0x03BC 0x0000 0x2 0x0
-#define MX6SX_PAD_CSI_PIXCLK__UART4_RX                            0x0074 0x03BC 0x0848 0x3 0x3
-#define MX6SX_PAD_CSI_PIXCLK__UART4_TX                            0x0074 0x03BC 0x0000 0x3 0x0
-#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT                      0x0074 0x03BC 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24                         0x0074 0x03BC 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27                        0x0074 0x03BC 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK                      0x0074 0x03BC 0x0784 0x7 0x2
-#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK                            0x0074 0x03BC 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33                       0x0074 0x03BC 0x0000 0x9 0x0
-#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
-#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
-#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
-#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0000 0x3 0x0
-#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
-#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
-#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
-#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0                       0x0078 0x03C0 0x07F8 0x7 0x0
-#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3                          0x0078 0x03C0 0x0000 0x8 0x0
-#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36                        0x0078 0x03C0 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_COL__ENET1_COL                            0x007C 0x03C4 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_COL__ENET2_MDC                            0x007C 0x03C4 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC                      0x007C 0x03C4 0x0654 0x2 0x1
-#define MX6SX_PAD_ENET1_COL__UART1_RI_B                           0x007C 0x03C4 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK                        0x007C 0x03C4 0x0828 0x4 0x1
-#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0                           0x007C 0x03C4 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23                         0x007C 0x03C4 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16                       0x007C 0x03C4 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37                        0x007C 0x03C4 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31                   0x007C 0x03C4 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_CRS__ENET1_CRS                            0x0080 0x03C8 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO                           0x0080 0x03C8 0x0770 0x1 0x1
-#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD                      0x0080 0x03C8 0x0648 0x2 0x1
-#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B                          0x0080 0x03C8 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK                           0x0080 0x03C8 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1                           0x0080 0x03C8 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22                         0x0080 0x03C8 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17                       0x0080 0x03C8 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36                        0x0080 0x03C8 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30                   0x0080 0x03C8 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_MDC__ENET1_MDC                            0x0084 0x03CC 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_MDC__ENET2_MDC                            0x0084 0x03CC 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS                     0x0084 0x03CC 0x0638 0x2 0x1
-#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT                       0x0084 0x03CC 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT                            0x0084 0x03CC 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2                           0x0084 0x03CC 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR                         0x0084 0x03CC 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_MDC__PWM7_OUT                             0x0084 0x03CC 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO                          0x0088 0x03D0 0x0764 0x0 0x1
-#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO                          0x0088 0x03D0 0x0770 0x1 0x2
-#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK                         0x0088 0x03D0 0x0000 0x2 0x0
-#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT                      0x0088 0x03D0 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT                           0x0088 0x03D0 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3                          0x0088 0x03D0 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC                         0x0088 0x03D0 0x0860 0x6 0x1
-#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT                            0x0088 0x03D0 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      0x008C 0x03D4 0x0768 0x0 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M                 0x008C 0x03D4 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS                  0x008C 0x03D4 0x0658 0x2 0x1
-#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B                       0x008C 0x03D4 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT                         0x008C 0x03D4 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4                        0x008C 0x03D4 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21                      0x008C 0x03D4 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18                    0x008C 0x03D4 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
-#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
-#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK                      0x0090 0x03D8 0x0000 0x4 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5                        0x0090 0x03D8 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20                      0x0090 0x03D8 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19                    0x0090 0x03D8 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34                     0x0090 0x03D8 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28                0x0090 0x03D8 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_COL__ENET2_COL                            0x0094 0x03DC 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET2_COL__ENET1_MDC                            0x0094 0x03DC 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC                      0x0094 0x03DC 0x064C 0x2 0x1
-#define MX6SX_PAD_ENET2_COL__UART1_RX                             0x0094 0x03DC 0x0830 0x3 0x2
-#define MX6SX_PAD_ENET2_COL__UART1_TX                             0x0094 0x03DC 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET2_COL__SPDIF_IN                             0x0094 0x03DC 0x0824 0x4 0x3
-#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6                           0x0094 0x03DC 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID                       0x0094 0x03DC 0x0624 0x6 0x1
-#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20                       0x0094 0x03DC 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33                        0x0094 0x03DC 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27                   0x0094 0x03DC 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_CRS__ENET2_CRS                            0x0098 0x03E0 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO                           0x0098 0x03E0 0x0764 0x1 0x2
-#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                     0x0098 0x03E0 0x0650 0x2 0x1
-#define MX6SX_PAD_ENET2_CRS__UART1_RX                             0x0098 0x03E0 0x0830 0x3 0x3
-#define MX6SX_PAD_ENET2_CRS__UART1_TX                             0x0098 0x03E0 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET2_CRS__MLB_SIG                              0x0098 0x03E0 0x07F0 0x4 0x1
-#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7                           0x0098 0x03E0 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID                       0x0098 0x03E0 0x0628 0x6 0x1
-#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21                       0x0098 0x03E0 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32                        0x0098 0x03E0 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26                   0x0098 0x03E0 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK                      0x009C 0x03E4 0x0774 0x0 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                 0x009C 0x03E4 0x0000 0x1 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL                          0x009C 0x03E4 0x07B8 0x2 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B                       0x009C 0x03E4 0x082C 0x3 0x2
-#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA                          0x009C 0x03E4 0x07EC 0x4 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8                        0x009C 0x03E4 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC                       0x009C 0x03E4 0x085C 0x6 0x1
-#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22                    0x009C 0x03E4 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31                     0x009C 0x03E4 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25                0x009C 0x03E4 0x0000 0x9 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x0000 0x3 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
-#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23                    0x00A0 0x03E8 0x0000 0x7 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30                     0x00A0 0x03E8 0x0000 0x8 0x0
-#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24                0x00A0 0x03E8 0x0000 0x9 0x0
-#define MX6SX_PAD_KEY_COL0__KPP_COL_0                             0x00A4 0x03EC 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B                           0x00A4 0x03EC 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL0__UART6_RTS_B                           0x00A4 0x03EC 0x0854 0x2 0x2
-#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK                           0x00A4 0x03EC 0x0710 0x3 0x0
-#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC                       0x00A4 0x03EC 0x066C 0x4 0x0
-#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10                           0x00A4 0x03EC 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1                      0x00A4 0x03EC 0x0820 0x6 0x1
-#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK                          0x00A4 0x03EC 0x0814 0x7 0x0
-#define MX6SX_PAD_KEY_COL0__VADC_DATA_0                           0x00A4 0x03EC 0x0000 0x8 0x0
-#define MX6SX_PAD_KEY_COL1__KPP_COL_1                             0x00A8 0x03F0 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B                        0x00A8 0x03F0 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL1__UART6_RX                              0x00A8 0x03F0 0x0858 0x2 0x2
-#define MX6SX_PAD_KEY_COL1__UART6_TX                              0x00A8 0x03F0 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO                           0x00A8 0x03F0 0x0714 0x3 0x0
-#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                      0x00A8 0x03F0 0x0670 0x4 0x0
-#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11                           0x00A8 0x03F0 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL1__USDHC3_RESET                          0x00A8 0x03F0 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC                          0x00A8 0x03F0 0x0818 0x7 0x0
-#define MX6SX_PAD_KEY_COL2__KPP_COL_2                             0x00AC 0x03F4 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B                           0x00AC 0x03F4 0x0874 0x1 0x1
-#define MX6SX_PAD_KEY_COL2__UART5_RTS_B                           0x00AC 0x03F4 0x084C 0x2 0x2
-#define MX6SX_PAD_KEY_COL2__CAN1_TX                               0x00AC 0x03F4 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_COL2__CANFD_TX1                             0x00AC 0x03F4 0x0000 0x4 0x0
-#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12                           0x00AC 0x03F4 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30                          0x00AC 0x03F4 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY                            0x00AC 0x03F4 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_COL3__KPP_COL_3                             0x00B0 0x03F8 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL                           0x00B0 0x03F8 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL3__UART5_RX                              0x00B0 0x03F8 0x0850 0x2 0x2
-#define MX6SX_PAD_KEY_COL3__UART5_TX                              0x00B0 0x03F8 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_COL3__CAN2_TX                               0x00B0 0x03F8 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_COL3__CANFD_TX2                             0x00B0 0x03F8 0x0000 0x4 0x0
-#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13                           0x00B0 0x03F8 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28                          0x00B0 0x03F8 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2                            0x00B0 0x03F8 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_COL4__KPP_COL_4                             0x00B4 0x03FC 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_COL4__ENET2_MDC                             0x00B4 0x03FC 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_COL4__I2C3_SCL                              0x00B4 0x03FC 0x07B8 0x2 0x2
-#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL                           0x00B4 0x03FC 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC                       0x00B4 0x03FC 0x0664 0x4 0x0
-#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14                           0x00B4 0x03FC 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_COL4__WEIM_CRE                              0x00B4 0x03FC 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
-#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
-#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
-#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0                      0x00B8 0x0400 0x081C 0x6 0x1
-#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0                        0x00B8 0x0400 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_ROW0__GPU_IDLE                              0x00B8 0x0400 0x0000 0x8 0x0
-#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1                             0x00BC 0x0404 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT                        0x00BC 0x0404 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW1__UART6_RX                              0x00BC 0x0404 0x0858 0x2 0x3
-#define MX6SX_PAD_KEY_ROW1__UART6_TX                              0x00BC 0x0404 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0                            0x00BC 0x0404 0x071C 0x3 0x0
-#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                       0x00BC 0x0404 0x065C 0x4 0x0
-#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16                           0x00BC 0x0404 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31                          0x00BC 0x0404 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0                        0x00BC 0x0404 0x080C 0x7 0x0
-#define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
-#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
-#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
-#define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
-#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29                          0x00C0 0x0408 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3                            0x00C0 0x0408 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3                             0x00C4 0x040C 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL                           0x00C4 0x040C 0x0000 0x1 0x0
-#define MX6SX_PAD_KEY_ROW3__UART5_RX                              0x00C4 0x040C 0x0850 0x2 0x3
-#define MX6SX_PAD_KEY_ROW3__UART5_TX                              0x00C4 0x040C 0x0000 0x2 0x0
-#define MX6SX_PAD_KEY_ROW3__CAN2_RX                               0x00C4 0x040C 0x0690 0x3 0x1
-#define MX6SX_PAD_KEY_ROW3__CANFD_RX2                             0x00C4 0x040C 0x0698 0x4 0x1
-#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18                           0x00C4 0x040C 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B                          0x00C4 0x040C 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1                            0x00C4 0x040C 0x0000 0x7 0x0
-#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4                             0x00C8 0x0410 0x0000 0x0 0x0
-#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO                            0x00C8 0x0410 0x0770 0x1 0x3
-#define MX6SX_PAD_KEY_ROW4__I2C3_SDA                              0x00C8 0x0410 0x07BC 0x2 0x2
-#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL                           0x00C8 0x0410 0x0000 0x3 0x0
-#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS                      0x00C8 0x0410 0x0668 0x4 0x0
-#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19                           0x00C8 0x0410 0x0000 0x5 0x0
-#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN                     0x00C8 0x0410 0x0000 0x6 0x0
-#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC                          0x00C8 0x0410 0x0810 0x7 0x0
-#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK                            0x00CC 0x0414 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN                         0x00CC 0x0414 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC                       0x00CC 0x0414 0x0634 0x2 0x1
-#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN                  0x00CC 0x0414 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16                          0x00CC 0x0414 0x06DC 0x4 0x0
-#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0                            0x00CC 0x0414 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_CLK__USDHC1_WP                             0x00CC 0x0414 0x0868 0x6 0x0
-#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16                        0x00CC 0x0414 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0                           0x00CC 0x0414 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0                          0x00CC 0x0414 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0                      0x00D0 0x0418 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B                         0x00D0 0x0418 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0                         0x00D0 0x0418 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0                     0x00D0 0x0418 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20                       0x00D0 0x0418 0x06EC 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1                         0x00D0 0x0418 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0                       0x00D0 0x0418 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21                     0x00D0 0x0418 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5                        0x00D0 0x0418 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5                       0x00D0 0x0418 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1                      0x00D4 0x041C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B                         0x00D4 0x041C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1                         0x00D4 0x041C 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1                     0x00D4 0x041C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21                       0x00D4 0x041C 0x06F0 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2                         0x00D4 0x041C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1                       0x00D4 0x041C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22                     0x00D4 0x041C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6                        0x00D4 0x041C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6                       0x00D4 0x041C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2                      0x00D8 0x0420 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B                         0x00D8 0x0420 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2                         0x00D8 0x0420 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2                     0x00D8 0x0420 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22                       0x00D8 0x0420 0x06F4 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3                         0x00D8 0x0420 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2                       0x00D8 0x0420 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23                     0x00D8 0x0420 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7                        0x00D8 0x0420 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7                       0x00D8 0x0420 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3                      0x00DC 0x0424 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24                       0x00DC 0x0424 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3                         0x00DC 0x0424 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3                     0x00DC 0x0424 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23                       0x00DC 0x0424 0x06F8 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4                         0x00DC 0x0424 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3                       0x00DC 0x0424 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24                     0x00DC 0x0424 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8                        0x00DC 0x0424 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8                       0x00DC 0x0424 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4                      0x00E0 0x0428 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25                       0x00E0 0x0428 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4                     0x00E0 0x0428 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC                         0x00E0 0x0428 0x0708 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5                         0x00E0 0x0428 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4                       0x00E0 0x0428 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25                     0x00E0 0x0428 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9                        0x00E0 0x0428 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9                       0x00E0 0x0428 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5                      0x00E4 0x042C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26                       0x00E4 0x042C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5                     0x00E4 0x042C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC                         0x00E4 0x042C 0x0700 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6                         0x00E4 0x042C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5                       0x00E4 0x042C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26                     0x00E4 0x042C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10                       0x00E4 0x042C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10                      0x00E4 0x042C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6                      0x00E8 0x0430 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2                        0x00E8 0x0430 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6                     0x00E8 0x0430 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK                        0x00E8 0x0430 0x0704 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7                         0x00E8 0x0430 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6                       0x00E8 0x0430 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27                     0x00E8 0x0430 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11                       0x00E8 0x0430 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11                      0x00E8 0x0430 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7                      0x00EC 0x0434 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3                        0x00EC 0x0434 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7                     0x00EC 0x0434 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK                          0x00EC 0x0434 0x0000 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8                         0x00EC 0x0434 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7                       0x00EC 0x0434 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28                     0x00EC 0x0434 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12                       0x00EC 0x0434 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12                      0x00EC 0x0434 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8                      0x00F0 0x0438 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8                          0x00F0 0x0438 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8                     0x00F0 0x0438 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9                        0x00F0 0x0438 0x06C4 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9                         0x00F0 0x0438 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8                       0x00F0 0x0438 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29                     0x00F0 0x0438 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13                       0x00F0 0x0438 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13                      0x00F0 0x0438 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9                      0x00F4 0x043C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9                          0x00F4 0x043C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9                     0x00F4 0x043C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8                        0x00F4 0x043C 0x06C0 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10                        0x00F4 0x043C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9                       0x00F4 0x043C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30                     0x00F4 0x043C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14                       0x00F4 0x043C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14                      0x00F4 0x043C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10                     0x00F8 0x0440 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10                         0x00F8 0x0440 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10                    0x00F8 0x0440 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7                        0x00F8 0x0440 0x06BC 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11                        0x00F8 0x0440 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10                      0x00F8 0x0440 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31                     0x00F8 0x0440 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15                       0x00F8 0x0440 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15                      0x00F8 0x0440 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11                     0x00FC 0x0444 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11                         0x00FC 0x0444 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11                    0x00FC 0x0444 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6                        0x00FC 0x0444 0x06B8 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12                        0x00FC 0x0444 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11                      0x00FC 0x0444 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0                     0x00FC 0x0444 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16                       0x00FC 0x0444 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16                      0x00FC 0x0444 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12                     0x0100 0x0448 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12                         0x0100 0x0448 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12                    0x0100 0x0448 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5                        0x0100 0x0448 0x06B4 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13                        0x0100 0x0448 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12                      0x0100 0x0448 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1                     0x0100 0x0448 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17                       0x0100 0x0448 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17                      0x0100 0x0448 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13                     0x0104 0x044C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13                         0x0104 0x044C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13                    0x0104 0x044C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4                        0x0104 0x044C 0x06B0 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14                        0x0104 0x044C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13                      0x0104 0x044C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2                     0x0104 0x044C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18                       0x0104 0x044C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18                      0x0104 0x044C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14                     0x0108 0x0450 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14                         0x0108 0x0450 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14                    0x0108 0x0450 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3                        0x0108 0x0450 0x06AC 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15                        0x0108 0x0450 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14                      0x0108 0x0450 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK                    0x0108 0x0450 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19                       0x0108 0x0450 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19                      0x0108 0x0450 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15                     0x010C 0x0454 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15                         0x010C 0x0454 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15                    0x010C 0x0454 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2                        0x010C 0x0454 0x06A8 0x4 0x1
-#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16                        0x010C 0x0454 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15                      0x010C 0x0454 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0                      0x010C 0x0454 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0                       0x010C 0x0454 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20                      0x010C 0x0454 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16                     0x0110 0x0458 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16                       0x0110 0x0458 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK                       0x0110 0x0458 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK                   0x0110 0x0458 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1                        0x0110 0x0458 0x06A4 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17                        0x0110 0x0458 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24                      0x0110 0x0458 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1                      0x0110 0x0458 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1                       0x0110 0x0458 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21                      0x0110 0x0458 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17                     0x0114 0x045C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17                       0x0114 0x045C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL                   0x0114 0x045C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0                        0x0114 0x045C 0x06A0 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18                        0x0114 0x045C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25                      0x0114 0x045C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2                      0x0114 0x045C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2                       0x0114 0x045C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22                      0x0114 0x045C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18                     0x0118 0x0460 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18                       0x0118 0x0460 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO                          0x0118 0x0460 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO                      0x0118 0x0460 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15                       0x0118 0x0460 0x06D8 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19                        0x0118 0x0460 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26                      0x0118 0x0460 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3                      0x0118 0x0460 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3                       0x0118 0x0460 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23                      0x0118 0x0460 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19                     0x011C 0x0464 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19                       0x011C 0x0464 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO                       0x011C 0x0464 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14                       0x011C 0x0464 0x06D4 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20                        0x011C 0x0464 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27                      0x011C 0x0464 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT                    0x011C 0x0464 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4                       0x011C 0x0464 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24                      0x011C 0x0464 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20                     0x0120 0x0468 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20                       0x0120 0x0468 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT                           0x0120 0x0468 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT              0x0120 0x0468 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13                       0x0120 0x0468 0x06D0 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21                        0x0120 0x0468 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28                      0x0120 0x0468 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP                        0x0120 0x0468 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5                       0x0120 0x0468 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25                      0x0120 0x0468 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21                     0x0124 0x046C 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21                       0x0124 0x046C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT                           0x0124 0x046C 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT              0x0124 0x046C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12                       0x0124 0x046C 0x06CC 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22                        0x0124 0x046C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29                      0x0124 0x046C 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0                      0x0124 0x046C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6                       0x0124 0x046C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26                      0x0124 0x046C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22                     0x0128 0x0470 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22                       0x0128 0x0470 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT                           0x0128 0x0470 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT              0x0128 0x0470 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11                       0x0128 0x0470 0x06C8 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23                        0x0128 0x0470 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30                      0x0128 0x0470 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1                      0x0128 0x0470 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7                       0x0128 0x0470 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27                      0x0128 0x0470 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23                     0x012C 0x0474 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23                       0x012C 0x0474 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT                           0x012C 0x0474 0x0000 0x2 0x0
-#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT              0x012C 0x0474 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10                       0x012C 0x0474 0x06FC 0x4 0x0
-#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24                        0x012C 0x0474 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31                      0x012C 0x0474 0x0000 0x6 0x0
-#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2                      0x012C 0x0474 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8                       0x012C 0x0474 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28                      0x012C 0x0474 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE                      0x0130 0x0478 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E                        0x0130 0x0478 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC                    0x0130 0x0478 0x063C 0x2 0x1
-#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN               0x0130 0x0478 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17                       0x0130 0x0478 0x06E0 0x4 0x0
-#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25                        0x0130 0x0478 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B                        0x0130 0x0478 0x0864 0x6 0x0
-#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17                     0x0130 0x0478 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1                        0x0130 0x0478 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1                       0x0130 0x0478 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC                        0x0134 0x047C 0x07E0 0x0 0x0
-#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS                           0x0134 0x047C 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD                     0x0134 0x047C 0x0630 0x2 0x1
-#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN                0x0134 0x047C 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18                        0x0134 0x047C 0x06E4 0x4 0x0
-#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26                         0x0134 0x047C 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP                           0x0134 0x047C 0x0870 0x6 0x0
-#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18                      0x0134 0x047C 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2                         0x0134 0x047C 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2                        0x0134 0x047C 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET                        0x0138 0x0480 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS                           0x0138 0x0480 0x0000 0x1 0x0
-#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD                     0x0138 0x0480 0x062C 0x2 0x1
-#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI                       0x0138 0x0480 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_RESET__M4_EVENTI                           0x0138 0x0480 0x0000 0x4 0x0
-#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27                         0x0138 0x0480 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY                        0x0138 0x0480 0x069C 0x6 0x0
-#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20                      0x0138 0x0480 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4                         0x0138 0x0480 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4                        0x0138 0x0480 0x0000 0x9 0x0
-#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC                        0x013C 0x0484 0x0000 0x0 0x0
-#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY                         0x013C 0x0484 0x07E0 0x1 0x1
-#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS                    0x013C 0x0484 0x0640 0x2 0x1
-#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN                0x013C 0x0484 0x0000 0x3 0x0
-#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19                        0x013C 0x0484 0x06E8 0x4 0x0
-#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28                         0x013C 0x0484 0x0000 0x5 0x0
-#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B                         0x013C 0x0484 0x086C 0x6 0x0
-#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19                      0x013C 0x0484 0x0000 0x7 0x0
-#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3                         0x013C 0x0484 0x0000 0x8 0x0
-#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3                        0x013C 0x0484 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE                           0x0140 0x0488 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_ALE__I2C3_SDA                              0x0140 0x0488 0x07BC 0x1 0x0
-#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B                         0x0140 0x0488 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0                            0x0140 0x0488 0x072C 0x3 0x0
-#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2                          0x0140 0x0488 0x079C 0x4 0x0
-#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0                            0x0140 0x0488 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B                            0x0140 0x0488 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0                         0x0140 0x0488 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN             0x0140 0x0488 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12                      0x0140 0x0488 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B                       0x0144 0x048C 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT                      0x0144 0x048C 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2                      0x0144 0x048C 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC                     0x0144 0x048C 0x0654 0x3 0x0
-#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK                         0x0144 0x048C 0x078C 0x4 0x0
-#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1                          0x0144 0x048C 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B                          0x0144 0x048C 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3                       0x0144 0x048C 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ          0x0144 0x048C 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9                     0x0144 0x048C 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B                       0x0148 0x0490 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B                      0x0148 0x0490 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3                      0x0148 0x0490 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD                     0x0148 0x0490 0x0648 0x3 0x0
-#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0                            0x0148 0x0490 0x0790 0x4 0x0
-#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2                          0x0148 0x0490 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_CE1_B__WEIM_OE                             0x0148 0x0490 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4                       0x0148 0x0490 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE      0x0148 0x0490 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8                     0x0148 0x0490 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE                           0x014C 0x0494 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_CLE__I2C3_SCL                              0x014C 0x0494 0x07B8 0x1 0x0
-#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK                          0x014C 0x0494 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK                           0x014C 0x0494 0x0720 0x3 0x0
-#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3                          0x014C 0x0494 0x0798 0x4 0x0
-#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3                            0x014C 0x0494 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_CLE__WEIM_BCLK                             0x014C 0x0494 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_CLE__TPSMP_CLK                             0x014C 0x0494 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP             0x014C 0x0494 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13                      0x014C 0x0494 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00                     0x0150 0x0498 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4                       0x0150 0x0498 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1                     0x0150 0x0498 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO                        0x0150 0x0498 0x0754 0x3 0x0
-#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK                        0x0150 0x0498 0x0788 0x4 0x0
-#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4                         0x0150 0x0498 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0                          0x0150 0x0498 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7                      0x0150 0x0498 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET  0x0150 0x0498 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5         0x0150 0x0498 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01                     0x0154 0x049C 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5                       0x0154 0x049C 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0                     0x0154 0x049C 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI                        0x0154 0x049C 0x0758 0x3 0x0
-#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS                         0x0154 0x049C 0x0778 0x4 0x0
-#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5                         0x0154 0x049C 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1                          0x0154 0x049C 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8                      0x0154 0x049C 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD      0x0154 0x049C 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4         0x0154 0x049C 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02                     0x0158 0x04A0 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6                       0x0158 0x04A0 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK                       0x0158 0x04A0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK                        0x0158 0x04A0 0x0750 0x3 0x0
-#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK                     0x0158 0x04A0 0x0784 0x4 0x0
-#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6                         0x0158 0x04A0 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2                          0x0158 0x04A0 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9                      0x0158 0x04A0 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV   0x0158 0x04A0 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3         0x0158 0x04A0 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03                     0x015C 0x04A4 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7                       0x015C 0x04A4 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B                      0x015C 0x04A4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0                         0x015C 0x04A4 0x075C 0x3 0x0
-#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK                     0x015C 0x04A4 0x0780 0x4 0x0
-#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7                         0x015C 0x04A4 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3                          0x015C 0x04A4 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10                     0x015C 0x04A4 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH     0x015C 0x04A4 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6         0x015C 0x04A4 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04                     0x0160 0x04A8 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4                       0x0160 0x04A8 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B                      0x0160 0x04A8 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B                        0x0160 0x04A8 0x083C 0x3 0x0
-#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                   0x0160 0x04A8 0x0650 0x4 0x0
-#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8                         0x0160 0x04A8 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4                          0x0160 0x04A8 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11                     0x0160 0x04A8 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH     0x0160 0x04A8 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0            0x0160 0x04A8 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x0000 0x3 0x0
-#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
-#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12                     0x0164 0x04AC 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET  0x0164 0x04AC 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1            0x0164 0x04AC 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06                     0x0168 0x04B0 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6                       0x0168 0x04B0 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B                      0x0168 0x04B0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA06__UART3_RX                           0x0168 0x04B0 0x0840 0x3 0x0
-#define MX6SX_PAD_NAND_DATA06__UART3_TX                           0x0168 0x04B0 0x0000 0x3 0x0
-#define MX6SX_PAD_NAND_DATA06__PWM3_OUT                           0x0168 0x04B0 0x0000 0x4 0x0
-#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10                        0x0168 0x04B0 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6                          0x0168 0x04B0 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13                     0x0168 0x04B0 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD      0x0168 0x04B0 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2            0x0168 0x04B0 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07                     0x016C 0x04B4 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7                       0x016C 0x04B4 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS                        0x016C 0x04B4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_DATA07__UART3_RX                           0x016C 0x04B4 0x0840 0x3 0x1
-#define MX6SX_PAD_NAND_DATA07__UART3_TX                           0x016C 0x04B4 0x0000 0x3 0x0
-#define MX6SX_PAD_NAND_DATA07__PWM4_OUT                           0x016C 0x04B4 0x0000 0x4 0x0
-#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11                        0x016C 0x04B4 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7                          0x016C 0x04B4 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14                     0x016C 0x04B4 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD      0x016C 0x04B4 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3            0x016C 0x04B4 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B                         0x0170 0x04B8 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B                       0x0170 0x04B8 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3                       0x0170 0x04B8 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS                     0x0170 0x04B8 0x0658 0x3 0x0
-#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS                           0x0170 0x04B8 0x077C 0x4 0x0
-#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12                          0x0170 0x04B8 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_RE_B__WEIM_RW                              0x0170 0x04B8 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5                        0x0170 0x04B8 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD        0x0170 0x04B8 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7                      0x0170 0x04B8 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B                   0x0174 0x04BC 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT                    0x0174 0x04BC 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1                    0x0174 0x04BC 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO                       0x0174 0x04BC 0x0724 0x3 0x0
-#define MX6SX_PAD_NAND_READY_B__ESAI_TX1                          0x0174 0x04BC 0x0794 0x4 0x0
-#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13                       0x0174 0x04BC 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1                       0x0174 0x04BC 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2                     0x0174 0x04BC 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN         0x0174 0x04BC 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10                  0x0174 0x04BC 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B                         0x0178 0x04C0 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT                       0x0178 0x04C0 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2                       0x0178 0x04C0 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD                      0x0178 0x04C0 0x0644 0x3 0x0
-#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0                         0x0178 0x04C0 0x07A4 0x4 0x0
-#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14                          0x0178 0x04C0 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT                            0x0178 0x04C0 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6                        0x0178 0x04C0 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV     0x0178 0x04C0 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6                      0x0178 0x04C0 0x0000 0x9 0x0
-#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B                         0x017C 0x04C4 0x0000 0x0 0x0
-#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B                       0x017C 0x04C4 0x0000 0x1 0x0
-#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0                       0x017C 0x04C4 0x0000 0x2 0x0
-#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI                          0x017C 0x04C4 0x0728 0x3 0x0
-#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1                         0x017C 0x04C4 0x07A0 0x4 0x0
-#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15                          0x017C 0x04C4 0x0000 0x5 0x0
-#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0                          0x017C 0x04C4 0x0000 0x6 0x0
-#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1                        0x017C 0x04C4 0x0000 0x7 0x0
-#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE       0x017C 0x04C4 0x0000 0x8 0x0
-#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11                     0x017C 0x04C4 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0                    0x0180 0x04C8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC                       0x0180 0x04C8 0x085C 0x1 0x2
-#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI                       0x0180 0x04C8 0x0718 0x2 0x1
-#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1                      0x0180 0x04C8 0x07A0 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14                      0x0180 0x04C8 0x06D4 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16                       0x0180 0x04C8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6                       0x0180 0x04C8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3                     0x0180 0x04C8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3           0x0180 0x04C8 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1                    0x0184 0x04CC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID                    0x0184 0x04CC 0x0624 0x1 0x2
-#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO                       0x0184 0x04CC 0x0714 0x2 0x1
-#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1                          0x0184 0x04CC 0x0794 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13                      0x0184 0x04CC 0x06D0 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17                       0x0184 0x04CC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5                       0x0184 0x04CC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4                     0x0184 0x04CC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0                   0x0184 0x04CC 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2                    0x0188 0x04D0 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR                      0x0188 0x04D0 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1                        0x0188 0x04D0 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK                       0x0188 0x04D0 0x078C 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12                      0x0188 0x04D0 0x06CC 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18                       0x0188 0x04D0 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4                       0x0188 0x04D0 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6                     0x0188 0x04D0 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1                   0x0188 0x04D0 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3                    0x018C 0x04D4 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC                       0x018C 0x04D4 0x0860 0x1 0x2
-#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2                        0x018C 0x04D4 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0                          0x018C 0x04D4 0x0790 0x3 0x2
-#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11                      0x018C 0x04D4 0x06C8 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19                       0x018C 0x04D4 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3                       0x018C 0x04D4 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7                     0x018C 0x04D4 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2                   0x018C 0x04D4 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS                         0x0190 0x04D8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX                             0x0190 0x04D8 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2                           0x0190 0x04D8 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI                         0x0190 0x04D8 0x0758 0x3 0x1
-#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15                        0x0190 0x04D8 0x06D8 0x4 0x1
-#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20                         0x0190 0x04D8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7                         0x0190 0x04D8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13                      0x0190 0x04D8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4             0x0190 0x04D8 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK                       0x0194 0x04DC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID                     0x0194 0x04DC 0x0628 0x1 0x2
-#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK                        0x0194 0x04DC 0x0710 0x2 0x1
-#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3                       0x0194 0x04DC 0x0798 0x3 0x2
-#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1                        0x0194 0x04DC 0x06A4 0x4 0x1
-#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21                        0x0194 0x04DC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0                        0x0194 0x04DC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0                      0x0194 0x04DC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5                    0x0194 0x04DC 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B                     0x0198 0x04E0 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR                      0x0198 0x04E0 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0                        0x0198 0x04E0 0x071C 0x2 0x1
-#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2                      0x0198 0x04E0 0x079C 0x3 0x2
-#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0                       0x0198 0x04E0 0x06A0 0x4 0x1
-#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22                       0x0198 0x04E0 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1                       0x0198 0x04E0 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1                     0x0198 0x04E0 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4                   0x0198 0x04E0 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B                     0x019C 0x04E4 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX                           0x019C 0x04E4 0x068C 0x1 0x2
-#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1                         0x019C 0x04E4 0x0694 0x2 0x2
-#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO                       0x019C 0x04E4 0x0754 0x3 0x1
-#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10                      0x019C 0x04E4 0x06FC 0x4 0x1
-#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23                       0x019C 0x04E4 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2                       0x019C 0x04E4 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
-#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24                       0x01A0 0x04E8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14                      0x01A0 0x04E8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                     0x01A0 0x04E8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                    0x01A4 0x04EC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B                       0x01A4 0x04EC 0x083C 0x1 0x5
-#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO                       0x01A4 0x04EC 0x0734 0x2 0x1
-#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK                       0x01A4 0x04EC 0x0788 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21                      0x01A4 0x04EC 0x06F0 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25                       0x01A4 0x04EC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13                      0x01A4 0x04EC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8                     0x01A4 0x04EC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2                    0x01A8 0x04F0 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA                          0x01A8 0x04F0 0x07B4 0x1 0x2
-#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY                        0x01A8 0x04F0 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0                      0x01A8 0x04F0 0x07A4 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20                      0x01A8 0x04F0 0x06EC 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26                       0x01A8 0x04F0 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12                      0x01A8 0x04F0 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5                     0x01A8 0x04F0 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3                    0x01AC 0x04F4 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL                          0x01AC 0x04F4 0x07B0 0x1 0x2
-#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3                        0x01AC 0x04F4 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS                        0x01AC 0x04F4 0x077C 0x3 0x2
-#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19                      0x01AC 0x04F4 0x06E8 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27                       0x01AC 0x04F4 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11                      0x01AC 0x04F4 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2                     0x01AC 0x04F4 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS                         0x01B0 0x04F8 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX                             0x01B0 0x04F8 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1                           0x01B0 0x04F8 0x0000 0x2 0x0
-#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0                          0x01B0 0x04F8 0x075C 0x3 0x1
-#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23                        0x01B0 0x04F8 0x06F8 0x4 0x1
-#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28                         0x01B0 0x04F8 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15                        0x01B0 0x04F8 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX                           0x01B4 0x04FC 0x0840 0x1 0x4
-#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX                           0x01B4 0x04FC 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
-#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
-#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
-#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29                        0x01B4 0x04FC 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8                        0x01B4 0x04FC 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                     0x01B4 0x04FC 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                     0x01B8 0x0500 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX                          0x01B8 0x0500 0x0840 0x1 0x5
-#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX                          0x01B8 0x0500 0x0000 0x1 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0                        0x01B8 0x0500 0x073C 0x2 0x1
-#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                    0x01B8 0x0500 0x0784 0x3 0x3
-#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17                      0x01B8 0x0500 0x06E0 0x4 0x1
-#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30                       0x01B8 0x0500 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9                       0x01B8 0x0500 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10                    0x01B8 0x0500 0x0000 0x7 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B                     0x01BC 0x0504 0x0000 0x0 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX                           0x01BC 0x0504 0x0690 0x1 0x2
-#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2                         0x01BC 0x0504 0x0698 0x2 0x2
-#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK                       0x01BC 0x0504 0x0750 0x3 0x1
-#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18                      0x01BC 0x0504 0x06E4 0x4 0x1
-#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31                       0x01BC 0x0504 0x0000 0x5 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10                      0x01BC 0x0504 0x0000 0x6 0x0
-#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14                    0x01BC 0x0504 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0                     0x01C0 0x0508 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0                          0x01C0 0x0508 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10                        0x01C0 0x0508 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0                      0x01C0 0x0508 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER              0x01C0 0x0508 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0                   0x01C0 0x0508 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1                     0x01C4 0x050C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1                          0x01C4 0x050C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11                        0x01C4 0x050C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1                      0x01C4 0x050C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER               0x01C4 0x050C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1                   0x01C4 0x050C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2                     0x01C8 0x0510 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2                          0x01C8 0x0510 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12                        0x01C8 0x0510 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2                      0x01C8 0x0510 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER               0x01C8 0x0510 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2                   0x01C8 0x0510 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3                     0x01CC 0x0514 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3                          0x01CC 0x0514 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13                        0x01CC 0x0514 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3                      0x01CC 0x0514 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER               0x01CC 0x0514 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3                   0x01CC 0x0514 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN                      0x01D0 0x0518 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4                       0x01D0 0x0518 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14                     0x01D0 0x0518 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0                   0x01D0 0x0518 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER            0x01D0 0x0518 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4                0x01D0 0x0518 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK                        0x01D4 0x051C 0x0768 0x0 0x1
-#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER                         0x01D4 0x051C 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5                          0x01D4 0x051C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15                        0x01D4 0x051C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1                      0x01D4 0x051C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER               0x01D4 0x051C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5                   0x01D4 0x051C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0                     0x01D8 0x0520 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC                        0x01D8 0x0520 0x0810 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6                          0x01D8 0x0520 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16                        0x01D8 0x0520 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2                      0x01D8 0x0520 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER               0x01D8 0x0520 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6                   0x01D8 0x0520 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1                     0x01DC 0x0524 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK                        0x01DC 0x0524 0x0808 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7                          0x01DC 0x0524 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17                        0x01DC 0x0524 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3                      0x01DC 0x0524 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER               0x01DC 0x0524 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7                   0x01DC 0x0524 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2                     0x01E0 0x0528 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC                        0x01E0 0x0528 0x0818 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8                          0x01E0 0x0528 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18                        0x01E0 0x0528 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4                      0x01E0 0x0528 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER               0x01E0 0x0528 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8                   0x01E0 0x0528 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3                     0x01E4 0x052C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK                        0x01E4 0x052C 0x0814 0x2 0x1
-#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9                          0x01E4 0x052C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19                        0x01E4 0x052C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5                      0x01E4 0x052C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER               0x01E4 0x052C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9                   0x01E4 0x052C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN                      0x01E8 0x0530 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0                   0x01E8 0x0530 0x080C 0x2 0x1
-#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10                      0x01E8 0x0530 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0                      0x01E8 0x0530 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6                   0x01E8 0x0530 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER             0x01E8 0x0530 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10               0x01E8 0x0530 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC                     0x01EC 0x0534 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER                         0x01EC 0x0534 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0                      0x01EC 0x0534 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11                         0x01EC 0x0534 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1                         0x01EC 0x0534 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7                      0x01EC 0x0534 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER                0x01EC 0x0534 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11                  0x01EC 0x0534 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0                     0x01F0 0x0538 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT                            0x01F0 0x0538 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12                         0x01F0 0x0538 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2                         0x01F0 0x0538 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8                      0x01F0 0x0538 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18                       0x01F0 0x0538 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12                  0x01F0 0x0538 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1                     0x01F4 0x053C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT                            0x01F4 0x053C 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13                         0x01F4 0x053C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3                         0x01F4 0x053C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9                      0x01F4 0x053C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19                       0x01F4 0x053C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13                  0x01F4 0x053C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2                     0x01F8 0x0540 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT                            0x01F8 0x0540 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14                         0x01F8 0x0540 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4                         0x01F8 0x0540 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10                     0x01F8 0x0540 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20                       0x01F8 0x0540 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14                  0x01F8 0x0540 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3                     0x01FC 0x0544 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT                            0x01FC 0x0544 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15                         0x01FC 0x0544 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5                         0x01FC 0x0544 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11                     0x01FC 0x0544 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21                       0x01FC 0x0544 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15                  0x01FC 0x0544 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN                      0x0200 0x0548 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16                      0x0200 0x0548 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6                      0x0200 0x0548 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12                  0x0200 0x0548 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22                    0x0200 0x0548 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16               0x0200 0x0548 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK                        0x0204 0x054C 0x0774 0x0 0x1
-#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER                         0x0204 0x054C 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17                         0x0204 0x054C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7                         0x0204 0x054C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13                     0x0204 0x054C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23                       0x0204 0x054C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17                  0x0204 0x054C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0                     0x0208 0x0550 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC                        0x0208 0x0550 0x07FC 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT                            0x0208 0x0550 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18                         0x0208 0x0550 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8                         0x0208 0x0550 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14                     0x0208 0x0550 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24                       0x0208 0x0550 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18                  0x0208 0x0550 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1                     0x020C 0x0554 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK                        0x020C 0x0554 0x07F4 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT                            0x020C 0x0554 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19                         0x020C 0x0554 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9                         0x020C 0x0554 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15                     0x020C 0x0554 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25                       0x020C 0x0554 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19                  0x020C 0x0554 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2                     0x0210 0x0558 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC                        0x0210 0x0558 0x0804 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT                            0x0210 0x0558 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20                         0x0210 0x0558 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC                          0x0210 0x0558 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL                            0x0210 0x0558 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26                       0x0210 0x0558 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20                  0x0210 0x0558 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3                     0x0214 0x055C 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK                        0x0214 0x055C 0x0800 0x2 0x1
-#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT                            0x0214 0x055C 0x0000 0x3 0x0
-#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21                         0x0214 0x055C 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC                          0x0214 0x055C 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT                        0x0214 0x055C 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27                       0x0214 0x055C 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21                  0x0214 0x055C 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN                      0x0218 0x0560 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0                   0x0218 0x0560 0x07F8 0x2 0x1
-#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22                      0x0218 0x0560 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD                       0x0218 0x0560 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B                         0x0218 0x0560 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28                    0x0218 0x0560 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22               0x0218 0x0560 0x0000 0x9 0x0
-#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC                     0x021C 0x0564 0x0000 0x0 0x0
-#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER                         0x021C 0x0564 0x0000 0x1 0x0
-#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0                      0x021C 0x0564 0x0000 0x2 0x0
-#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23                         0x021C 0x0564 0x0000 0x5 0x0
-#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK                         0x021C 0x0564 0x0000 0x6 0x0
-#define MX6SX_PAD_RGMII2_TXC__SJC_DONE                            0x021C 0x0564 0x0000 0x7 0x0
-#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29                       0x021C 0x0564 0x0000 0x8 0x0
-#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23                  0x021C 0x0564 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_CLK__USDHC1_CLK                             0x0220 0x0568 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS                       0x0220 0x0568 0x0668 0x1 0x1
-#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B                           0x0220 0x0568 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_CLK__GPT_CLK                                0x0220 0x0568 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB                   0x0220 0x0568 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0                             0x0220 0x0568 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT                  0x0220 0x0568 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_CLK__CCM_OUT1                               0x0220 0x0568 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK                      0x0220 0x0568 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45                          0x0220 0x0568 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_CMD__USDHC1_CMD                             0x0224 0x056C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC                        0x0224 0x056C 0x0664 0x1 0x1
-#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B                           0x0224 0x056C 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1                           0x0224 0x056C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB                   0x0224 0x056C 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1                             0x0224 0x056C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN                   0x0224 0x056C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_CMD__CCM_CLKO1                              0x0224 0x056C 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK                        0x0224 0x056C 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46                          0x0224 0x056C 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0                         0x0228 0x0570 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                      0x0228 0x0570 0x065C 0x1 0x1
-#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS             0x0228 0x0570 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1                         0x0228 0x0570 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA0__UART2_RX                             0x0228 0x0570 0x0838 0x4 0x2
-#define MX6SX_PAD_SD1_DATA0__UART2_TX                             0x0228 0x0570 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2                           0x0228 0x0570 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                 0x0228 0x0570 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA0__CCM_OUT2                             0x0228 0x0570 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP                        0x0228 0x0570 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48                        0x0228 0x0570 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1                         0x022C 0x0574 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                      0x022C 0x0574 0x066C 0x1 0x1
-#define MX6SX_PAD_SD1_DATA1__PWM4_OUT                             0x022C 0x0574 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2                         0x022C 0x0574 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA1__UART2_RX                             0x022C 0x0574 0x0838 0x4 0x3
-#define MX6SX_PAD_SD1_DATA1__UART2_TX                             0x022C 0x0574 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3                           0x022C 0x0574 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT                0x022C 0x0574 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2                            0x022C 0x0574 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN                      0x022C 0x0574 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47                        0x022C 0x0574 0x0000 0x9 0x0
-#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2                         0x0230 0x0578 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
-#define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
-#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0000 0x4 0x0
-#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
-#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N                        0x0230 0x0578 0x0000 0x8 0x0
-#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3                         0x0234 0x057C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                      0x0234 0x057C 0x0660 0x1 0x1
-#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                      0x0234 0x057C 0x065C 0x2 0x2
-#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3                         0x0234 0x057C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B                          0x0234 0x057C 0x0834 0x4 0x3
-#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5                           0x0234 0x057C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1                           0x0234 0x057C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY                         0x0234 0x057C 0x069C 0x7 0x2
-#define MX6SX_PAD_SD1_DATA3__VADC_RST_N                           0x0234 0x057C 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_CLK__USDHC2_CLK                             0x0238 0x0580 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS                       0x0238 0x0580 0x0680 0x1 0x2
-#define MX6SX_PAD_SD2_CLK__KPP_COL_5                              0x0238 0x0580 0x07C8 0x2 0x1
-#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK                            0x0238 0x0580 0x0740 0x3 0x1
-#define MX6SX_PAD_SD2_CLK__MLB_SIG                                0x0238 0x0580 0x07F0 0x4 0x2
-#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6                             0x0238 0x0580 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_CLK__MQS_RIGHT                              0x0238 0x0580 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY                         0x0238 0x0580 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5                   0x0238 0x0580 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29                          0x0238 0x0580 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_CMD__USDHC2_CMD                             0x023C 0x0584 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC                        0x023C 0x0584 0x067C 0x1 0x2
-#define MX6SX_PAD_SD2_CMD__KPP_ROW_5                              0x023C 0x0584 0x07D4 0x2 0x1
-#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI                            0x023C 0x0584 0x0748 0x3 0x1
-#define MX6SX_PAD_SD2_CMD__MLB_CLK                                0x023C 0x0584 0x07E8 0x4 0x2
-#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7                             0x023C 0x0584 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_CMD__MQS_LEFT                               0x023C 0x0584 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B                           0x023C 0x0584 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4                   0x023C 0x0584 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30                          0x023C 0x0584 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0                         0x0240 0x0588 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD                      0x0240 0x0588 0x0674 0x1 0x2
-#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7                            0x0240 0x0588 0x07DC 0x2 0x1
-#define MX6SX_PAD_SD2_DATA0__PWM1_OUT                             0x0240 0x0588 0x0000 0x3 0x0
-#define MX6SX_PAD_SD2_DATA0__I2C4_SDA                             0x0240 0x0588 0x07C4 0x4 0x3
-#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8                           0x0240 0x0588 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3                           0x0240 0x0588 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA0__UART4_RX                             0x0240 0x0588 0x0848 0x7 0x4
-#define MX6SX_PAD_SD2_DATA0__UART4_TX                             0x0240 0x0588 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                 0x0240 0x0588 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50                        0x0240 0x0588 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1                         0x0244 0x058C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC                      0x0244 0x058C 0x0684 0x1 0x2
-#define MX6SX_PAD_SD2_DATA1__KPP_COL_7                            0x0244 0x058C 0x07D0 0x2 0x1
-#define MX6SX_PAD_SD2_DATA1__PWM2_OUT                             0x0244 0x058C 0x0000 0x3 0x0
-#define MX6SX_PAD_SD2_DATA1__I2C4_SCL                             0x0244 0x058C 0x07C0 0x4 0x3
-#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9                           0x0244 0x058C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2                           0x0244 0x058C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA1__UART4_RX                             0x0244 0x058C 0x0848 0x7 0x5
-#define MX6SX_PAD_SD2_DATA1__UART4_TX                             0x0244 0x058C 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                 0x0244 0x058C 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49                        0x0244 0x058C 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2                         0x0248 0x0590 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS                     0x0248 0x0590 0x0688 0x1 0x2
-#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6                            0x0248 0x0590 0x07D8 0x2 0x1
-#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0                           0x0248 0x0590 0x074C 0x3 0x1
-#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                     0x0248 0x0590 0x081C 0x4 0x2
-#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10                          0x0248 0x0590 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT                            0x0248 0x0590 0x0000 0x6 0x0
-#define MX6SX_PAD_SD2_DATA2__UART6_RX                             0x0248 0x0590 0x0858 0x7 0x4
-#define MX6SX_PAD_SD2_DATA2__UART6_TX                             0x0248 0x0590 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                 0x0248 0x0590 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32                        0x0248 0x0590 0x0000 0x9 0x0
-#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3                         0x024C 0x0594 0x0000 0x0 0x0
-#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD                      0x024C 0x0594 0x0678 0x1 0x2
-#define MX6SX_PAD_SD2_DATA3__KPP_COL_6                            0x024C 0x0594 0x07CC 0x2 0x1
-#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO                          0x024C 0x0594 0x0744 0x3 0x1
-#define MX6SX_PAD_SD2_DATA3__MLB_DATA                             0x024C 0x0594 0x07EC 0x4 0x2
-#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11                          0x024C 0x0594 0x0000 0x5 0x0
-#define MX6SX_PAD_SD2_DATA3__SPDIF_IN                             0x024C 0x0594 0x0824 0x6 0x4
-#define MX6SX_PAD_SD2_DATA3__UART6_RX                             0x024C 0x0594 0x0858 0x7 0x5
-#define MX6SX_PAD_SD2_DATA3__UART6_TX                             0x024C 0x0594 0x0000 0x7 0x0
-#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
-#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
-#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
-#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0                             0x0250 0x0598 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY                            0x0250 0x0598 0x07E4 0x6 0x0
-#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29                         0x0250 0x0598 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5             0x0250 0x0598 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_CMD__USDHC3_CMD                             0x0254 0x059C 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_CMD__UART4_RX                               0x0254 0x059C 0x0848 0x1 0x0
-#define MX6SX_PAD_SD3_CMD__UART4_TX                               0x0254 0x059C 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI                            0x0254 0x059C 0x0748 0x2 0x0
-#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC                        0x0254 0x059C 0x067C 0x3 0x0
-#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC                           0x0254 0x059C 0x07E4 0x4 0x1
-#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1                             0x0254 0x059C 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_CMD__LCDIF2_RS                              0x0254 0x059C 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28                         0x0254 0x059C 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4             0x0254 0x059C 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0                         0x0258 0x05A0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA0__I2C4_SCL                             0x0258 0x05A0 0x07C0 0x1 0x0
-#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1                           0x0258 0x05A0 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD                      0x0258 0x05A0 0x0674 0x3 0x0
-#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1                        0x0258 0x05A0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2                           0x0258 0x05A0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT                            0x0258 0x05A0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30                       0x0258 0x05A0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0                          0x0258 0x05A0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0           0x0258 0x05A0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1                         0x025C 0x05A4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA1__I2C4_SDA                             0x025C 0x05A4 0x07C4 0x1 0x0
-#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2                           0x025C 0x05A4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC                      0x025C 0x05A4 0x0684 0x3 0x0
-#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0                        0x025C 0x05A4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3                           0x025C 0x05A4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT                            0x025C 0x05A4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31                       0x025C 0x05A4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1                          0x025C 0x05A4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1           0x025C 0x05A4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2                         0x0260 0x05A8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B                          0x0260 0x05A8 0x0844 0x1 0x1
-#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0                           0x0260 0x05A8 0x074C 0x2 0x0
-#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                     0x0260 0x05A8 0x0688 0x3 0x0
-#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK                           0x0260 0x05A8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4                           0x0260 0x05A8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN                        0x0260 0x05A8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26                       0x0260 0x05A8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2                          0x0260 0x05A8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2           0x0260 0x05A8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3                         0x0264 0x05AC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA3__UART4_RX                             0x0264 0x05AC 0x0848 0x1 0x1
-#define MX6SX_PAD_SD3_DATA3__UART4_TX                             0x0264 0x05AC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO                          0x0264 0x05AC 0x0744 0x2 0x0
-#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                      0x0264 0x05AC 0x0678 0x3 0x0
-#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE                        0x0264 0x05AC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5                           0x0264 0x05AC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E                          0x0264 0x05AC 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27                       0x0264 0x05AC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3                          0x0264 0x05AC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3           0x0264 0x05AC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4                         0x0268 0x05B0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA4__CAN2_RX                              0x0268 0x05B0 0x0690 0x1 0x0
-#define MX6SX_PAD_SD3_DATA4__CANFD_RX2                            0x0268 0x05B0 0x0698 0x2 0x0
-#define MX6SX_PAD_SD3_DATA4__UART3_RX                             0x0268 0x05B0 0x0840 0x3 0x2
-#define MX6SX_PAD_SD3_DATA4__UART3_TX                             0x0268 0x05B0 0x0000 0x3 0x0
-#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3                        0x0268 0x05B0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6                           0x0268 0x05B0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                 0x0268 0x05B0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1                       0x0268 0x05B0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4                          0x0268 0x05B0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0              0x0268 0x05B0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5                         0x026C 0x05B4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA5__CAN1_TX                              0x026C 0x05B4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_DATA5__CANFD_TX1                            0x026C 0x05B4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA5__UART3_RX                             0x026C 0x05B4 0x0840 0x3 0x3
-#define MX6SX_PAD_SD3_DATA5__UART3_TX                             0x026C 0x05B4 0x0000 0x3 0x0
-#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2                        0x026C 0x05B4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7                           0x026C 0x05B4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT                0x026C 0x05B4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE                         0x026C 0x05B4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5                          0x026C 0x05B4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1              0x026C 0x05B4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6                         0x0270 0x05B8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA6__CAN2_TX                              0x0270 0x05B8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD3_DATA6__CANFD_TX2                            0x0270 0x05B8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B                          0x0270 0x05B8 0x083C 0x3 0x2
-#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4                        0x0270 0x05B8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8                           0x0270 0x05B8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT                0x0270 0x05B8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0                       0x0270 0x05B8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7                          0x0270 0x05B8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7           0x0270 0x05B8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
-#define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
-#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x0000 0x3 0x0
-#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
-#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR                      0x0274 0x05BC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6                          0x0274 0x05BC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2           0x0274 0x05BC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_CLK__USDHC4_CLK                             0x0278 0x05C0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15                         0x0278 0x05C0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO                            0x0278 0x05C0 0x0724 0x2 0x1
-#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS                       0x0278 0x05C0 0x0638 0x3 0x0
-#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13                         0x0278 0x05C0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12                            0x0278 0x05C0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2                             0x0278 0x05C0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20                         0x0278 0x05C0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12                          0x0278 0x05C0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL           0x0278 0x05C0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_CMD__USDHC4_CMD                             0x027C 0x05C4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14                         0x027C 0x05C4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI                            0x027C 0x05C4 0x0728 0x2 0x1
-#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC                        0x027C 0x05C4 0x0634 0x3 0x0
-#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14                         0x027C 0x05C4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13                            0x027C 0x05C4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1                             0x027C 0x05C4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19                         0x027C 0x05C4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11                          0x027C 0x05C4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN                    0x027C 0x05C4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0                         0x0280 0x05C8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10                       0x0280 0x05C8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0                           0x0280 0x05C8 0x072C 0x2 0x1
-#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD                      0x0280 0x05C8 0x062C 0x3 0x0
-#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12                       0x0280 0x05C8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14                          0x0280 0x05C8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3                           0x0280 0x05C8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21                       0x0280 0x05C8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13                        0x0280 0x05C8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE                      0x0280 0x05C8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1                         0x0284 0x05CC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11                       0x0284 0x05CC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK                          0x0284 0x05CC 0x0720 0x2 0x1
-#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC                      0x0284 0x05CC 0x063C 0x3 0x0
-#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11                       0x0284 0x05CC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15                          0x0284 0x05CC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY                           0x0284 0x05CC 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22                       0x0284 0x05CC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14                        0x0284 0x05CC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR                 0x0284 0x05CC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2                         0x0288 0x05D0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12                       0x0288 0x05D0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA2__I2C2_SDA                             0x0288 0x05D0 0x07B4 0x2 0x0
-#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS                     0x0288 0x05D0 0x0640 0x3 0x0
-#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10                       0x0288 0x05D0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16                          0x0288 0x05D0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3                           0x0288 0x05D0 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23                       0x0288 0x05D0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15                        0x0288 0x05D0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB                   0x0288 0x05D0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3                         0x028C 0x05D4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13                       0x028C 0x05D4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA3__I2C2_SCL                             0x028C 0x05D4 0x07B0 0x2 0x0
-#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD                      0x028C 0x05D4 0x0630 0x3 0x0
-#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9                        0x028C 0x05D4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17                          0x028C 0x05D4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY                           0x028C 0x05D4 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24                       0x028C 0x05D4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16                        0x028C 0x05D4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS             0x028C 0x05D4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4                         0x0290 0x05D8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09                       0x0290 0x05D8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA4__UART5_RX                             0x0290 0x05D8 0x0850 0x2 0x0
-#define MX6SX_PAD_SD4_DATA4__UART5_TX                             0x0290 0x05D8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK                          0x0290 0x05D8 0x0730 0x3 0x0
-#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8                        0x0290 0x05D8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18                          0x0290 0x05D8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT                            0x0290 0x05D8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16                       0x0290 0x05D8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE                    0x0290 0x05D8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE            0x0290 0x05D8 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5                         0x0294 0x05DC 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B                        0x0294 0x05DC 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA5__UART5_RX                             0x0294 0x05DC 0x0850 0x2 0x1
-#define MX6SX_PAD_SD4_DATA5__UART5_TX                             0x0294 0x05DC 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI                          0x0294 0x05DC 0x0738 0x3 0x0
-#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7                        0x0294 0x05DC 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19                          0x0294 0x05DC 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA5__SPDIF_IN                             0x0294 0x05DC 0x0824 0x6 0x0
-#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17                       0x0294 0x05DC 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9                         0x0294 0x05DC 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0           0x0294 0x05DC 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6                         0x0298 0x05E0 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B                        0x0298 0x05E0 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B                          0x0298 0x05E0 0x084C 0x2 0x0
-#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO                          0x0298 0x05E0 0x0734 0x3 0x0
-#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6                        0x0298 0x05E0 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20                          0x0298 0x05E0 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA6__USDHC4_WP                            0x0298 0x05E0 0x0878 0x6 0x0
-#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18                       0x0298 0x05E0 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10                        0x0298 0x05E0 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
-#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B                          0x029C 0x05E4 0x0874 0x6 0x0
-#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15                       0x029C 0x05E4 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE                     0x029C 0x05E4 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD                     0x029C 0x05E4 0x0000 0x9 0x0
-#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B                     0x02A0 0x05E8 0x0000 0x0 0x0
-#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS                        0x02A0 0x05E8 0x0000 0x1 0x0
-#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET                       0x02A0 0x05E8 0x0000 0x2 0x0
-#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK                        0x02A0 0x05E8 0x0000 0x3 0x0
-#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET                       0x02A0 0x05E8 0x0000 0x4 0x0
-#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22                        0x02A0 0x05E8 0x0000 0x5 0x0
-#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS                          0x02A0 0x05E8 0x0000 0x6 0x0
-#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25                     0x02A0 0x05E8 0x0000 0x7 0x0
-#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17                      0x02A0 0x05E8 0x0000 0x8 0x0
-#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2            0x02A0 0x05E8 0x0000 0x9 0x0
-#define MX6SX_PAD_USB_H_DATA__USB_H_DATA                          0x02A4 0x05EC 0x0000 0x0 0x0
-#define MX6SX_PAD_USB_H_DATA__PWM2_OUT                            0x02A4 0x05EC 0x0000 0x1 0x0
-#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT                      0x02A4 0x05EC 0x0000 0x2 0x0
-#define MX6SX_PAD_USB_H_DATA__I2C4_SDA                            0x02A4 0x05EC 0x07C4 0x3 0x1
-#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B                        0x02A4 0x05EC 0x0000 0x4 0x0
-#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10                         0x02A4 0x05EC 0x0000 0x5 0x0
-#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE                      0x02A8 0x05F0 0x0000 0x0 0x0
-#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT                          0x02A8 0x05F0 0x0000 0x1 0x0
-#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT                    0x02A8 0x05F0 0x0000 0x2 0x0
-#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL                          0x02A8 0x05F0 0x07C0 0x3 0x1
-#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB              0x02A8 0x05F0 0x0000 0x4 0x0
-#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11                       0x02A8 0x05F0 0x0000 0x5 0x0
-
-#endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/src/arm/integrator.dtsi b/src/arm/integrator.dtsi
deleted file mode 100644
index 88e3d477bf16..000000000000
--- a/src/arm/integrator.dtsi
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * SoC core Device Tree for the ARM Integrator platforms
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	core-module@10000000 {
-		compatible = "arm,core-module-integrator";
-		reg = <0x10000000 0x200>;
-	};
-
-	ebi@12000000 {
-		compatible = "arm,external-bus-interface";
-		reg = <0x12000000 0x100>;
-	};
-
-	timer@13000000 {
-		reg = <0x13000000 0x100>;
-		interrupt-parent = <&pic>;
-		interrupts = <5>;
-	};
-
-	timer@13000100 {
-		reg = <0x13000100 0x100>;
-		interrupt-parent = <&pic>;
-		interrupts = <6>;
-	};
-
-	timer@13000200 {
-		reg = <0x13000200 0x100>;
-		interrupt-parent = <&pic>;
-		interrupts = <7>;
-	};
-
-	pic@14000000 {
-		compatible = "arm,versatile-fpga-irq";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		reg = <0x14000000 0x100>;
-		clear-mask = <0xffffffff>;
-	};
-
-	flash@24000000 {
-		compatible = "cfi-flash";
-		reg = <0x24000000 0x02000000>;
-	};
-
-	fpga {
-		compatible = "arm,amba-bus", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&pic>;
-
-		/*
-		 * These PrimeCells are in the same locations and using the
-		 * same interrupts in all Integrators, however the silicon
-		 * version deployed is different.
-		 */
-		rtc@15000000 {
-			reg = <0x15000000 0x1000>;
-			interrupts = <8>;
-		};
-
-		uart@16000000 {
-			reg = <0x16000000 0x1000>;
-			interrupts = <1>;
-		};
-
-		uart@17000000 {
-			reg = <0x17000000 0x1000>;
-			interrupts = <2>;
-		};
-
-		kmi@18000000 {
-			reg = <0x18000000 0x1000>;
-			interrupts = <3>;
-		};
-
-		kmi@19000000 {
-			reg = <0x19000000 0x1000>;
-			interrupts = <4>;
-		};
-	};
-};
diff --git a/src/arm/integratorap.dts b/src/arm/integratorap.dts
deleted file mode 100644
index cf06e32ee108..000000000000
--- a/src/arm/integratorap.dts
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Device Tree for the ARM Integrator/AP platform
- */
-
-/dts-v1/;
-/include/ "integrator.dtsi"
-
-/ {
-	model = "ARM Integrator/AP";
-	compatible = "arm,integrator-ap";
-	dma-ranges = <0x80000000 0x0 0x80000000>;
-
-	aliases {
-		arm,timer-primary = &timer2;
-		arm,timer-secondary = &timer1;
-	};
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
-	};
-
-	/* 24 MHz chrystal on the core module */
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	/* The UART clock is 14.74 MHz divided by an ICS525 */
-	uartclk: uartclk@14.74M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <14745600>;
-	};
-
-	syscon {
-		compatible = "arm,integrator-ap-syscon";
-		reg = <0x11000000 0x100>;
-		interrupt-parent = <&pic>;
-		/* These are the logical module IRQs */
-		interrupts = <9>, <10>, <11>, <12>;
-	};
-
-	timer0: timer@13000000 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	timer1: timer@13000100 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	timer2: timer@13000200 {
-		compatible = "arm,integrator-timer";
-		clocks = <&xtal24mhz>;
-	};
-
-	pic: pic@14000000 {
-		valid-mask = <0x003fffff>;
-	};
-
-	pci: pciv3@62000000 {
-		compatible = "v3,v360epc-pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0x62000000 0x10000>;
-		interrupt-parent = <&pic>;
-		interrupts = <17>; /* Bus error IRQ */
-		ranges = <0x00000000 0 0x61000000 /* config space */
-			0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */
-			0x01000000 0 0x0 /* I/O space */
-			0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */
-			0x02000000 0 0x00000000 /* non-prefectable memory */
-			0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */
-			0x42000000 0 0x10000000 /* prefetchable memory */
-			0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */
-		interrupt-map-mask = <0xf800 0 0 0x7>;
-		interrupt-map = <
-		/* IDSEL 9 */
-		0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
-		0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
-		0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
-		0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
-		/* IDSEL 10 */
-		0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
-		0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
-		0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
-		0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
-		/* IDSEL 11 */
-		0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
-		0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
-		0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
-		0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
-		/* IDSEL 12 */
-		0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
-		0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
-		0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
-		0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
-		>;
-	};
-
-	fpga {
-		/*
-		 * The Integator/AP predates the idea to have magic numbers
-		 * identifying the PrimeCell in hardware, thus we have to
-		 * supply these from the device tree.
-		 */
-		rtc: rtc@15000000 {
-			compatible = "arm,pl030", "arm,primecell";
-			arm,primecell-periphid = <0x00041030>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		uart0: uart@16000000 {
-			compatible = "arm,pl010", "arm,primecell";
-			arm,primecell-periphid = <0x00041010>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		uart1: uart@17000000 {
-			compatible = "arm,pl010", "arm,primecell";
-			arm,primecell-periphid = <0x00041010>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		kmi0: kmi@18000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			arm,primecell-periphid = <0x00041050>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi1: kmi@19000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			arm,primecell-periphid = <0x00041050>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-	};
-};
diff --git a/src/arm/integratorcp.dts b/src/arm/integratorcp.dts
deleted file mode 100644
index d43f15b4f79a..000000000000
--- a/src/arm/integratorcp.dts
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * Device Tree for the ARM Integrator/CP platform
- */
-
-/dts-v1/;
-/include/ "integrator.dtsi"
-
-/ {
-	model = "ARM Integrator/CP";
-	compatible = "arm,integrator-cp";
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
-	};
-
-	/*
-	 * The Integrator/CP overall clocking architecture can be found in
-	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
-	 * appear to illustrate the layout used in most configurations.
-	 */
-
-	/* The codec chrystal operates at 24.576 MHz */
-	xtal_codec: xtal24.576@24.576M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24576000>;
-	};
-
-	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
-	aaci_bitclk: aaci_bitclk@12.288M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&xtal_codec>;
-	};
-
-	/* This is a 25MHz chrystal on the base board */
-	xtal25mhz: xtal25mhz@25M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
-	uartclk: uartclk@14.74M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <14745600>;
-	};
-
-	/* Actually sysclk I think */
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	core-module@10000000 {
-		/* 24 MHz chrystal on the core module */
-		xtal24mhz: xtal24mhz@24M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		/*
-		 * External oscillator on the core module, usually used
-		 * to drive video circuitry. Driven from the 24MHz clock.
-		 */
-		auxosc: cm_aux_osc@25M {
-			#clock-cells = <0>;
-			compatible = "arm,integrator-cm-auxosc";
-			clocks = <&xtal24mhz>;
-		};
-
-		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
-		kmiclk: kmiclk@1M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <3>;
-			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
-		};
-
-		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <24>;
-			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
-		};
-	};
-
-	syscon {
-		compatible = "arm,integrator-cp-syscon";
-		reg = <0xcb000000 0x100>;
-	};
-
-	timer0: timer@13000000 {
-		/* TIMER0 runs directly on the 25MHz chrystal */
-		compatible = "arm,integrator-cp-timer";
-		clocks = <&xtal25mhz>;
-	};
-
-	timer1: timer@13000100 {
-		/* TIMER1 runs @ 1MHz */
-		compatible = "arm,integrator-cp-timer";
-		clocks = <&timclk>;
-	};
-
-	timer2: timer@13000200 {
-		/* TIMER2 runs @ 1MHz */
-		compatible = "arm,integrator-cp-timer";
-		clocks = <&timclk>;
-	};
-
-	pic: pic@14000000 {
-		valid-mask = <0x1fc003ff>;
-	};
-
-	cic: cic@10000040 {
-		compatible = "arm,versatile-fpga-irq";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		reg = <0x10000040 0x100>;
-		clear-mask = <0xffffffff>;
-		valid-mask = <0x00000007>;
-	};
-
-	/* The SIC is cascaded off IRQ 26 on the PIC */
-	sic: sic@ca000000 {
-		compatible = "arm,versatile-fpga-irq";
-		interrupt-parent = <&pic>;
-		interrupts = <26>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		reg = <0xca000000 0x100>;
-		clear-mask = <0x00000fff>;
-		valid-mask = <0x00000fff>;
-	};
-
-	ethernet@c8000000 {
-		compatible = "smsc,lan91c111";
-		reg = <0xc8000000 0x10>;
-		interrupt-parent = <&pic>;
-		interrupts = <27>;
-	};
-
-	fpga {
-		/*
-		 * These PrimeCells are at the same location and using
-		 * the same interrupts in all Integrators, but in the CP
-		 * slightly newer versions are deployed.
-		 */
-		rtc@15000000 {
-			compatible = "arm,pl031", "arm,primecell";
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		uart@16000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		uart@17000000 {
-			compatible = "arm,pl011", "arm,primecell";
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		kmi@18000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		kmi@19000000 {
-			compatible = "arm,pl050", "arm,primecell";
-			clocks = <&kmiclk>, <&pclk>;
-			clock-names = "KMIREFCLK", "apb_pclk";
-		};
-
-		/*
-		 * These PrimeCells are only available on the Integrator/CP
-		 */
-		mmc@1c000000 {
-			compatible = "arm,pl180", "arm,primecell";
-			reg = <0x1c000000 0x1000>;
-			interrupts = <23 24>;
-			max-frequency = <515633>;
-			clocks = <&uartclk>, <&pclk>;
-			clock-names = "mclk", "apb_pclk";
-		};
-
-		aaci@1d000000 {
-			compatible = "arm,pl041", "arm,primecell";
-			reg = <0x1d000000 0x1000>;
-			interrupts = <25>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		clcd@c0000000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0xC0000000 0x1000>;
-			interrupts = <22>;
-			clocks = <&auxosc>, <&pclk>;
-			clock-names = "clcd", "apb_pclk";
-		};
-	};
-};
diff --git a/src/arm/k2e-clocks.dtsi b/src/arm/k2e-clocks.dtsi
deleted file mode 100644
index 598afe91c676..000000000000
--- a/src/arm/k2e-clocks.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Edison SoC specific device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-clocks {
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
-		fixed-postdiv = <2>;
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkpass>;
-		clock-output-names = "papllclk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3a>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	clkusb1: clkusb1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "usb";
-		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkhyperlink0: clkhyperlink0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-0";
-		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <5>;
-	};
-
-	clkpcie1: clkpcie1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "pcie";
-		reg = <0x0235006c 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkxge: clkxge {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "xge";
-		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-};
diff --git a/src/arm/k2e-evm.dts b/src/arm/k2e-evm.dts
deleted file mode 100644
index c568f067604d..000000000000
--- a/src/arm/k2e-evm.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Edison EVM device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "k2e.dtsi"
-
-/ {
-	compatible =  "ti,k2e-evm","ti,keystone";
-	model = "Texas Instruments Keystone 2 Edison EVM";
-
-	soc {
-
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-sys";
-			};
-
-			refclkpass: refclkpass {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-pass";
-			};
-
-			refclkddr3a: refclkddr3a {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3a";
-			};
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "at,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x1FE80000>;
-			};
-		};
-	};
-};
-
-&spi0 {
-	nor_flash: n25q128a11@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
diff --git a/src/arm/k2e.dtsi b/src/arm/k2e.dtsi
deleted file mode 100644
index 03d01909525b..000000000000
--- a/src/arm/k2e.dtsi
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Edison soc device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-		};
-	};
-
-	soc {
-		/include/ "k2e-clocks.dtsi"
-
-		usb: usb@2680000 {
-			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
-			dwc3@2690000 {
-				interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-
-		usb1_phy: usb_phy@2620750 {
-			compatible = "ti,keystone-usbphy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2620750 24>;
-			status = "disabled";
-		};
-
-		usb1: usb@25000000 {
-			compatible = "ti,keystone-dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x25000000 0x10000>;
-			clocks = <&clkusb1>;
-			clock-names = "usb";
-			interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
-			ranges;
-			status = "disabled";
-
-			dwc3@25010000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x25010000 0x70000>;
-				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
-				usb-phy = <&usb1_phy>, <&usb1_phy>;
-			};
-		};
-	};
-};
diff --git a/src/arm/k2hk-clocks.dtsi b/src/arm/k2hk-clocks.dtsi
deleted file mode 100644
index d5adee3c0067..000000000000
--- a/src/arm/k2hk-clocks.dtsi
+++ /dev/null
@@ -1,426 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Kepler/Hawking SoC clock nodes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-clocks {
-	armpllclk: armpllclk@2620370 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkarm>;
-		clock-output-names = "arm-pll-clk";
-		reg = <0x02620370 4>;
-		reg-names = "control";
-	};
-
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
-		fixed-postdiv = <2>;
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkpass>;
-		clock-output-names = "papllclk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3a>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	ddr3bpllclk: ddr3bpllclk@2620368 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclkddr3b>;
-		clock-output-names = "ddr-3b-pll-clk";
-		reg = <0x02620368 4>;
-		reg-names = "control";
-	};
-
-	clktsip: clktsip {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "tsip";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clksrio: clksrio {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1rstiso13>;
-		clock-output-names = "srio";
-		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <4>;
-	};
-
-	clkhyperlink0: clkhyperlink0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-0";
-		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <5>;
-	};
-
-	clkgem1: clkgem1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem1";
-		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <9>;
-	};
-
-	clkgem2: clkgem2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem2";
-		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <10>;
-	};
-
-	clkgem3: clkgem3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem3";
-		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <11>;
-	};
-
-	clkgem4: clkgem4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem4";
-		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <12>;
-	};
-
-	clkgem5: clkgem5 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem5";
-		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <13>;
-	};
-
-	clkgem6: clkgem6 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem6";
-		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <14>;
-	};
-
-	clkgem7: clkgem7 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem7";
-		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <15>;
-	};
-
-	clkddr31: clkddr31 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "ddr3-1";
-		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <16>;
-	};
-
-	clktac: clktac {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tac";
-		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac01: clkrac01 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac-01";
-		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac23: clkrac23 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac-23";
-		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkfftc0: clkfftc0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-0";
-		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkfftc1: clkfftc1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-1";
-		reg = <0x02350074 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkfftc2: clkfftc2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-2";
-		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc3: clkfftc3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-3";
-		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc4: clkfftc4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-4";
-		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkfftc5: clkfftc5 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-5";
-		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <20>;
-	};
-
-	clkaif: clkaif {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "aif";
-		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <21>;
-	};
-
-	clktcp3d0: clktcp3d0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-0";
-		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d1: clktcp3d1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-1";
-		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d2: clktcp3d2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-2";
-		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clktcp3d3: clktcp3d3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-3";
-		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clkvcp0: clkvcp0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-0";
-		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp1: clkvcp1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-1";
-		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp2: clkvcp2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-2";
-		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp3: clkvcp3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-3";
-		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp4: clkvcp4 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-4";
-		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp5: clkvcp5 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-5";
-		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp6: clkvcp6 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-6";
-		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkvcp7: clkvcp7 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-7";
-		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <25>;
-	};
-
-	clkbcp: clkbcp {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "bcp";
-		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <26>;
-	};
-
-	clkdxb: clkdxb {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "dxb";
-		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <27>;
-	};
-
-	clkhyperlink1: clkhyperlink1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "hyperlink-1";
-		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <28>;
-	};
-
-	clkxge: clkxge {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "xge";
-		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-};
diff --git a/src/arm/k2hk-evm.dts b/src/arm/k2hk-evm.dts
deleted file mode 100644
index 3223cc152a85..000000000000
--- a/src/arm/k2hk-evm.dts
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Kepler/Hawking EVM device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "k2hk.dtsi"
-
-/ {
-	compatible =  "ti,k2hk-evm","ti,keystone";
-	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
-
-	soc {
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-sys";
-			};
-
-			refclkpass: refclkpass {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-pass";
-			};
-
-			refclkarm: refclkarm {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <125000000>;
-				clock-output-names = "refclk-arm";
-			};
-
-			refclkddr3a: refclkddr3a {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3a";
-			};
-
-			refclkddr3b: refclkddr3b {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk-ddr3b";
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		debug1_1 {
-			label = "keystone:green:debug1";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
-		};
-
-		debug1_2 {
-			label = "keystone:red:debug1";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
-		};
-
-		debug2 {
-			label = "keystone:blue:debug2";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
-		};
-
-		debug3 {
-			label = "keystone:blue:debug3";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x1fe80000>;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "at,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&spi0 {
-	nor_flash: n25q128a11@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
-
-&mdio {
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
diff --git a/src/arm/k2hk.dtsi b/src/arm/k2hk.dtsi
deleted file mode 100644
index c73899c73118..000000000000
--- a/src/arm/k2hk.dtsi
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 Kepler/Hawking soc specific device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <3>;
-		};
-	};
-
-	soc {
-		/include/ "k2hk-clocks.dtsi"
-	};
-};
diff --git a/src/arm/k2l-clocks.dtsi b/src/arm/k2l-clocks.dtsi
deleted file mode 100644
index eb1e3e29f073..000000000000
--- a/src/arm/k2l-clocks.dtsi
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Copyright 2013-2014 Texas Instruments, Inc.
- *
- * Keystone 2 lamarr SoC clock nodes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-clocks {
-	armpllclk: armpllclk@2620370 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclksys>;
-		clock-output-names = "arm-pll-clk";
-		reg = <0x02620370 4>;
-		reg-names = "control";
-	};
-
-	mainpllclk: mainpllclk@2310110 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,main-pll-clock";
-		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
-		fixed-postdiv = <2>;
-	};
-
-	papllclk: papllclk@2620358 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclksys>;
-		clock-output-names = "papllclk";
-		reg = <0x02620358 4>;
-		reg-names = "control";
-	};
-
-	ddr3apllclk: ddr3apllclk@2620360 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-clock";
-		clocks = <&refclksys>;
-		clock-output-names = "ddr-3a-pll-clk";
-		reg = <0x02620360 4>;
-		reg-names = "control";
-	};
-
-	clkdfeiqnsys: clkdfeiqnsys {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "dfe";
-		reg-names = "control", "domain";
-		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
-		domain-id = <0>;
-	};
-
-	clkpcie1: clkpcie1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "pcie";
-		reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <4>;
-	};
-
-	clkgem1: clkgem1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem1";
-		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <9>;
-	};
-
-	clkgem2: clkgem2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem2";
-		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <10>;
-	};
-
-	clkgem3: clkgem3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem3";
-		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <11>;
-	};
-
-	clktac: clktac {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tac";
-		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkrac: clkrac {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "rac";
-		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <17>;
-	};
-
-	clkdfepd0: clkdfepd0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "dfe-pd0";
-		reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <18>;
-	};
-
-	clkfftc0: clkfftc0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-0";
-		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <19>;
-	};
-
-	clkosr: clkosr {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "osr";
-		reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <21>;
-	};
-
-	clktcp3d0: clktcp3d0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-0";
-		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <22>;
-	};
-
-	clktcp3d1: clktcp3d1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tcp3d-1";
-		reg = <0x02350094 0xb00>, <0x02350058 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <23>;
-	};
-
-	clkvcp0: clkvcp0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-0";
-		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp1: clkvcp1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-1";
-		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp2: clkvcp2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-2";
-		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkvcp3: clkvcp3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "vcp-3";
-		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <24>;
-	};
-
-	clkbcp: clkbcp {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "bcp";
-		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <26>;
-	};
-
-	clkdfepd1: clkdfepd1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "dfe-pd1";
-		reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <27>;
-	};
-
-	clkfftc1: clkfftc1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "fftc-1";
-		reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <28>;
-	};
-
-	clkiqnail: clkiqnail {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "iqn-ail";
-		reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <29>;
-	};
-
-	clkuart2: clkuart2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart2";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkuart3: clkuart3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart3";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-};
diff --git a/src/arm/k2l-evm.dts b/src/arm/k2l-evm.dts
deleted file mode 100644
index fec43128a2e0..000000000000
--- a/src/arm/k2l-evm.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Lamarr EVM device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "keystone.dtsi"
-#include "k2l.dtsi"
-
-/ {
-	compatible =  "ti,k2l-evm","ti,keystone";
-	model = "Texas Instruments Keystone 2 Lamarr EVM";
-
-	soc {
-		clocks {
-			refclksys: refclksys {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <122880000>;
-				clock-output-names = "refclk-sys";
-			};
-		};
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&i2c0 {
-	dtt@50 {
-		compatible = "at,24c1024";
-		reg = <0x50>;
-	};
-};
-
-&aemif {
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		clock-ranges;
-		ranges;
-
-		ti,cs-chipselect = <0>;
-		/* all timings in nanoseconds */
-		ti,cs-min-turnaround-ns = <12>;
-		ti,cs-read-hold-ns = <6>;
-		ti,cs-read-strobe-ns = <23>;
-		ti,cs-read-setup-ns = <9>;
-		ti,cs-write-hold-ns = <8>;
-		ti,cs-write-strobe-ns = <23>;
-		ti,cs-write-setup-ns = <8>;
-
-		nand@0,0 {
-			compatible = "ti,keystone-nand","ti,davinci-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0 0x4000000
-			       1 0 0x0000100>;
-
-			ti,davinci-chipselect = <0>;
-			ti,davinci-mask-ale = <0x2000>;
-			ti,davinci-mask-cle = <0x4000>;
-			ti,davinci-mask-chipsel = <0>;
-			nand-ecc-mode = "hw";
-			ti,davinci-ecc-bits = <4>;
-			nand-on-flash-bbt;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "params";
-				reg = <0x100000 0x80000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "ubifs";
-				reg = <0x180000 0x7FE80000>;
-			};
-		};
-	};
-};
-
-&spi0 {
-	nor_flash: n25q128a11@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
-		spi-max-frequency = <54000000>;
-		m25p,fast-read;
-		reg = <0>;
-
-		partition@0 {
-			label = "u-boot-spl";
-			reg = <0x0 0x80000>;
-			read-only;
-		};
-
-		partition@1 {
-			label = "misc";
-			reg = <0x80000 0xf80000>;
-		};
-	};
-};
diff --git a/src/arm/k2l.dtsi b/src/arm/k2l.dtsi
deleted file mode 100644
index 1f7f479589e1..000000000000
--- a/src/arm/k2l.dtsi
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Texas Instruments, Inc.
- *
- * Keystone 2 Lamarr SoC specific device tree
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gic>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a15";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	soc {
-
-		/include/ "k2l-clocks.dtsi"
-
-		uart2: serial@02348400 {
-			compatible = "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02348400 0x100>;
-			clocks	= <&clkuart2>;
-			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		uart3:	serial@02348800 {
-			compatible = "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02348800 0x100>;
-			clocks	= <&clkuart3>;
-			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
-		};
-	};
-};
diff --git a/src/arm/keystone-clocks.dtsi b/src/arm/keystone-clocks.dtsi
deleted file mode 100644
index 0c334b25781e..000000000000
--- a/src/arm/keystone-clocks.dtsi
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * Device Tree Source for Keystone 2 clock tree
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-clocks {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	mainmuxclk: mainmuxclk@2310108 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-mux-clock";
-		clocks = <&mainpllclk>, <&refclksys>;
-		reg = <0x02310108 4>;
-		bit-shift = <23>;
-		bit-mask = <1>;
-		clock-output-names = "mainmuxclk";
-	};
-
-	chipclk1: chipclk1 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&mainmuxclk>;
-		clock-div = <1>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1";
-	};
-
-	chipclk1rstiso: chipclk1rstiso {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&mainmuxclk>;
-		clock-div = <1>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso";
-	};
-
-	gemtraceclk: gemtraceclk@2310120 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-divider-clock";
-		clocks = <&mainmuxclk>;
-		reg = <0x02310120 4>;
-		bit-shift = <0>;
-		bit-mask = <8>;
-		clock-output-names = "gemtraceclk";
-	};
-
-	chipstmxptclk: chipstmxptclk {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,pll-divider-clock";
-		clocks = <&mainmuxclk>;
-		reg = <0x02310164 4>;
-		bit-shift = <0>;
-		bit-mask = <8>;
-		clock-output-names = "chipstmxptclk";
-	};
-
-	chipclk12: chipclk12 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <2>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk12";
-	};
-
-	chipclk13: chipclk13 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <3>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk13";
-	};
-
-	paclk13: paclk13 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&papllclk>;
-		clock-div = <3>;
-		clock-mult = <1>;
-		clock-output-names = "paclk13";
-	};
-
-	chipclk14: chipclk14 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <4>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk14";
-	};
-
-	chipclk16: chipclk16 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <6>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk16";
-	};
-
-	chipclk112: chipclk112 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <12>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk112";
-	};
-
-	chipclk124: chipclk124 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1>;
-		clock-div = <24>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk114";
-	};
-
-	chipclk1rstiso13: chipclk1rstiso13 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <3>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso13";
-	};
-
-	chipclk1rstiso14: chipclk1rstiso14 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <4>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso14";
-	};
-
-	chipclk1rstiso16: chipclk1rstiso16 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <6>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso16";
-	};
-
-	chipclk1rstiso112: chipclk1rstiso112 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&chipclk1rstiso>;
-		clock-div = <12>;
-		clock-mult = <1>;
-		clock-output-names = "chipclk1rstiso112";
-	};
-
-	clkmodrst0: clkmodrst0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "modrst0";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-
-	clkusb: clkusb {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "usb";
-		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkaemifspi: clkaemifspi {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk16>;
-		clock-output-names = "aemif-spi";
-		reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-
-	clkdebugsstrc: clkdebugsstrc {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "debugss-trc";
-		reg = <0x02350014 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <1>;
-	};
-
-	clktetbtrc: clktetbtrc {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk13>;
-		clock-output-names = "tetb-trc";
-		reg = <0x02350018 0xb00>, <0x02350004 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <1>;
-	};
-
-	clkpa: clkpa {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&paclk13>;
-		clock-output-names = "pa";
-		reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <2>;
-	};
-
-	clkcpgmac: clkcpgmac {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkpa>;
-		clock-output-names = "cpgmac";
-		reg = <0x02350020 0xb00>, <0x02350008 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <2>;
-	};
-
-	clksa: clksa {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkpa>;
-		clock-output-names = "sa";
-		reg = <0x02350024 0xb00>, <0x02350008 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <2>;
-	};
-
-	clkpcie: clkpcie {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "pcie";
-		reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <3>;
-	};
-
-	clksr: clksr {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1rstiso112>;
-		clock-output-names = "sr";
-		reg = <0x02350034 0xb00>, <0x02350018 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <6>;
-	};
-
-	clkgem0: clkgem0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk1>;
-		clock-output-names = "gem0";
-		reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <8>;
-	};
-
-	clkddr30: clkddr30 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&chipclk12>;
-		clock-output-names = "ddr3-0";
-		reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <16>;
-	};
-
-	clkwdtimer0: clkwdtimer0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer0";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkwdtimer1: clkwdtimer1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer1";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkwdtimer2: clkwdtimer2 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer2";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkwdtimer3: clkwdtimer3 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer3";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clktimer15: clktimer15 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "timer15";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkuart0: clkuart0 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart0";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkuart1: clkuart1 {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "uart1";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkaemif: clkaemif {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkaemifspi>;
-		clock-output-names = "aemif";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkusim: clkusim {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "usim";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clki2c: clki2c {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "i2c";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkspi: clkspi {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkaemifspi>;
-		clock-output-names = "spi";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkgpio: clkgpio {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "gpio";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-
-	clkkeymgr: clkkeymgr {
-		#clock-cells = <0>;
-		compatible = "ti,keystone,psc-clock";
-		clocks = <&clkmodrst0>;
-		clock-output-names = "keymgr";
-		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
-		reg-names = "control", "domain";
-		domain-id = <0>;
-	};
-};
diff --git a/src/arm/keystone.dtsi b/src/arm/keystone.dtsi
deleted file mode 100644
index 9e31fe7d31f8..000000000000
--- a/src/arm/keystone.dtsi
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Copyright 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "Texas Instruments Keystone 2 SoC";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0	= &uart0;
-	};
-
-	memory {
-		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
-	};
-
-	gic: interrupt-controller {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x0 0x02561000 0x0 0x1000>,
-		      <0x0 0x02562000 0x0 0x2000>,
-		      <0x0 0x02564000 0x0 0x1000>,
-		      <0x0 0x02566000 0x0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-				IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts =
-			<GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
-			     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "ti,keystone","simple-bus";
-		interrupt-parent = <&gic>;
-		ranges = <0x0 0x0 0x0 0xc0000000>;
-		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
-
-		pllctrl: pll-controller@02310000 {
-			compatible = "ti,keystone-pllctrl", "syscon";
-			reg = <0x02310000 0x200>;
-		};
-
-		devctrl: device-state-control@02620000 {
-			compatible = "ti,keystone-devctrl", "syscon";
-			reg = <0x02620000 0x1000>;
-		};
-
-		rstctrl: reset-controller {
-			compatible = "ti,keystone-reset";
-			ti,syscon-pll = <&pllctrl 0xe4>;
-			ti,syscon-dev = <&devctrl 0x328>;
-			ti,wdt-list = <0>;
-		};
-
-		/include/ "keystone-clocks.dtsi"
-
-		uart0: serial@02530c00 {
-			compatible = "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02530c00 0x100>;
-			clocks	= <&clkuart0>;
-			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		uart1:	serial@02531000 {
-			compatible = "ns16550a";
-			current-speed = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			reg = <0x02531000 0x100>;
-			clocks	= <&clkuart1>;
-			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		i2c0: i2c@2530000 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x02530000 0x400>;
-			clock-frequency = <100000>;
-			clocks = <&clki2c>;
-			interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@2530400 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x02530400 0x400>;
-			clock-frequency = <100000>;
-			clocks = <&clki2c>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@2530800 {
-			compatible = "ti,davinci-i2c";
-			reg = <0x02530800 0x400>;
-			clock-frequency = <100000>;
-			clocks = <&clki2c>;
-			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi0: spi@21000400 {
-			compatible = "ti,dm6441-spi";
-			reg = <0x21000400 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkspi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@21000600 {
-			compatible = "ti,dm6441-spi";
-			reg = <0x21000600 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkspi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi2: spi@21000800 {
-			compatible = "ti,dm6441-spi";
-			reg = <0x21000800 0x200>;
-			num-cs = <4>;
-			ti,davinci-spi-intr-line = <0>;
-			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkspi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		usb_phy: usb_phy@2620738 {
-			compatible = "ti,keystone-usbphy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2620738 32>;
-			status = "disabled";
-		};
-
-		usb: usb@2680000 {
-			compatible = "ti,keystone-dwc3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x2680000 0x10000>;
-			clocks = <&clkusb>;
-			clock-names = "usb";
-			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
-			ranges;
-			dma-coherent;
-			dma-ranges;
-			status = "disabled";
-
-			dwc3@2690000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x2690000 0x70000>;
-				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
-				usb-phy = <&usb_phy>, <&usb_phy>;
-			};
-		};
-
-		wdt: wdt@022f0080 {
-			compatible = "ti,keystone-wdt","ti,davinci-wdt";
-			reg = <0x022f0080 0x80>;
-			clocks = <&clkwdtimer0>;
-		};
-
-		clock_event: timer@22f0000 {
-			compatible = "ti,keystone-timer";
-			reg = <0x022f0000 0x80>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clktimer15>;
-		};
-
-		gpio0: gpio@260bf00 {
-			compatible = "ti,keystone-gpio";
-			reg = <0x0260bf00 0x100>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			/* HW Interrupts mapped to GPIO pins */
-			interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&clkgpio>;
-			clock-names = "gpio";
-			ti,ngpio = <32>;
-			ti,davinci-gpio-unbanked = <32>;
-		};
-
-		aemif: aemif@21000A00 {
-			compatible = "ti,keystone-aemif", "ti,davinci-aemif";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			clocks = <&clkaemif>;
-			clock-names = "aemif";
-			clock-ranges;
-
-			reg = <0x21000A00 0x00000100>;
-			ranges = <0 0 0x30000000 0x10000000
-				  1 0 0x21000A00 0x00000100>;
-		};
-
-		mdio: mdio@02090300 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg		= <0x02090300 0x100>;
-			status = "disabled";
-			clocks = <&clkpa>;
-			clock-names = "fck";
-			bus_freq	= <2500000>;
-		};
-	};
-};
diff --git a/src/arm/kirkwood-6192.dtsi b/src/arm/kirkwood-6192.dtsi
deleted file mode 100644
index dd81508b919b..000000000000
--- a/src/arm/kirkwood-6192.dtsi
+++ /dev/null
@@ -1,84 +0,0 @@
-/ {
-	mbus {
-		pciec: pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,88f6192-pinctrl";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp5", "mpp21", "mpp23";
-				marvell,function = "sata0";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp4", "mpp20", "mpp22";
-				marvell,function = "sata1";
-			};
-			pmx_sdio: pmx-sdio {
-				marvell,pins = "mpp12", "mpp13", "mpp14",
-					       "mpp15", "mpp16", "mpp17";
-				marvell,function = "sdio";
-			};
-		};
-
-		rtc: rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
-		sata: sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			status = "disabled";
-		};
-
-		sdio: mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-6281.dtsi b/src/arm/kirkwood-6281.dtsi
deleted file mode 100644
index 7dc7d6782e83..000000000000
--- a/src/arm/kirkwood-6281.dtsi
+++ /dev/null
@@ -1,88 +0,0 @@
-/ {
-	mbus {
-		pciec: pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,88f6281-pinctrl";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp5", "mpp21", "mpp23";
-				marvell,function = "sata0";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp4", "mpp20", "mpp22";
-				marvell,function = "sata1";
-			};
-			pmx_sdio: pmx-sdio {
-				marvell,pins = "mpp12", "mpp13", "mpp14",
-					       "mpp15", "mpp16", "mpp17";
-				marvell,function = "sdio";
-			};
-		};
-
-		rtc: rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
-		sata: sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			phys = <&sata_phy0>, <&sata_phy1>;
-			phy-names = "port0", "port1";
-			status = "disabled";
-		};
-
-		sdio: mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-6282.dtsi b/src/arm/kirkwood-6282.dtsi
deleted file mode 100644
index 4680eec990f0..000000000000
--- a/src/arm/kirkwood-6282.dtsi
+++ /dev/null
@@ -1,138 +0,0 @@
-/ {
-	mbus {
-		pciec: pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-			        0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-
-			pcie1: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 10>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 18>;
-				status = "disabled";
-			};
-		};
-	};
-	ocp@f1000000 {
-
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,88f6282-pinctrl";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp5", "mpp21", "mpp23";
-				marvell,function = "sata0";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp4", "mpp20", "mpp22";
-				marvell,function = "sata1";
-			};
-
-			/*
-			 * Default I2C1 pinctrl setting on mpp36/mpp37,
-			 * overwrite marvell,pins on board level if required.
-			 */
-			pmx_twsi1: pmx-twsi1 {
-				marvell,pins = "mpp36", "mpp37";
-				marvell,function = "twsi1";
-			};
-
-			pmx_sdio: pmx-sdio {
-				marvell,pins = "mpp12", "mpp13", "mpp14",
-					       "mpp15", "mpp16", "mpp17";
-				marvell,function = "sdio";
-			};
-		};
-
-		thermal: thermal@10078 {
-			compatible = "marvell,kirkwood-thermal";
-			reg = <0x10078 0x4>;
-			status = "okay";
-		};
-
-		rtc: rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
-		i2c1: i2c@11100 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11100 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <32>;
-			clock-frequency = <100000>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_twsi1>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		sata: sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			phys = <&sata_phy0>, <&sata_phy1>;
-			phy-names = "port0", "port1";
-			status = "disabled";
-		};
-
-		sdio: mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-98dx4122.dtsi b/src/arm/kirkwood-98dx4122.dtsi
deleted file mode 100644
index 9e1f741d74ff..000000000000
--- a/src/arm/kirkwood-98dx4122.dtsi
+++ /dev/null
@@ -1,51 +0,0 @@
-/ {
-	mbus {
-		pciec: pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
-
-			pcie0: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			compatible = "marvell,98dx4122-pinctrl";
-
-		};
-	};
-};
-
-&sata_phy0 {
-	status = "disabled";
-};
-
-&sata_phy1 {
-	status = "disabled";
-};
diff --git a/src/arm/kirkwood-b3.dts b/src/arm/kirkwood-b3.dts
deleted file mode 100644
index c9247f8672ae..000000000000
--- a/src/arm/kirkwood-b3.dts
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Device Tree file for Excito Bubba B3
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Note: This requires a new'ish version of u-boot, which disables the
- * L2 cache. If your B3 silently fails to boot, u-boot is probably too
- * old. Either upgrade, or consider the following email:
- *
- * http://lists.debian.org/debian-arm/2012/08/msg00128.html
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Excito B3";
-	compatible = "excito,b3", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-	memory { /* 512 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			/* Wifi model has Atheros chipset on pcie port */
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led-green {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_red: pmx-led-red {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_blue: pmx-led-blue {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_beeper: pmx-beeper {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p16@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p16";
-				reg = <0>;
-				spi-max-frequency = <40000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0xc0000>;
-					label = "u-boot";
-				};
-
-				partition@c0000 {
-					reg = <0xc0000 0x20000>;
-					label = "u-boot env";
-				};
-
-				partition@e0000 {
-					reg = <0xe0000 0x120000>;
-					label = "data";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-			/*
-			 * There is something on the bus at address 0x64.
-			 * Not yet identified what it is, maybe the eeprom
-			 * for the Atheros WiFi chip?
-			 */
-		};
-
-
-		serial@12000 {
-			/* Internal on test pins, 3.3v TTL
-		 	 * UART0_RX = Testpoint 65
-			 * UART0_TX = Testpoint 66
-			 * See the Excito Wiki for more details.
-		 	 */
-			status = "okay";
-		};
-
-		sata@80000 {
-			/* One internal, the second as eSATA */
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio-leds {
-		/*
-		 * There is one LED "port" on the front and the colours
-		 * mix together giving some interesting combinations.
-		 */
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_green &pmx_led_red
-			      &pmx_led_blue >;
-		pinctrl-names = "default";
-
-		programming_led {
-			label = "bubba3:green:programming";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		error_led {
-			label = "bubba3:red:error";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		active_led {
-			label = "bubba3:blue:active";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_button_power>;
-		pinctrl-names = "default";
-
-		power-button {
-			/* On the back */
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	beeper: beeper {
-		/* 4KHz Piezoelectric buzzer */
-		compatible = "gpio-beeper";
-		pinctrl-0 = <&pmx_beeper>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-
-	ethphy1: ethernet-phy@24 {
-		device_type = "ethernet-phy";
-		reg = <24>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
diff --git a/src/arm/kirkwood-cloudbox.dts b/src/arm/kirkwood-cloudbox.dts
deleted file mode 100644
index ab6ab4933e6b..000000000000
--- a/src/arm/kirkwood-cloudbox.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "LaCie CloudBox";
-	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
-				marvell,pins = "mpp15";
-				marvell,function = "sata0";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			pinctrl-0 = <&pmx_cloudbox_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Power push button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "cloudbox:red:fail";
-			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		};
-		blue-sata {
-			label = "cloudbox:blue:sata";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-d2net.dts b/src/arm/kirkwood-d2net.dts
deleted file mode 100644
index 6b7856025001..000000000000
--- a/src/arm/kirkwood-d2net.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Device Tree file for d2 Network v2
- *
- * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-#include "kirkwood-netxbig.dtsi"
-
-/ {
-	model = "LaCie d2 Network v2";
-	compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "d2net_v2:blue:sata";
-			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "d2net_v2:red:fail";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/kirkwood-db-88f6281.dts b/src/arm/kirkwood-db-88f6281.dts
deleted file mode 100644
index c39dd766c75a..000000000000
--- a/src/arm/kirkwood-db-88f6281.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Marvell DB-88F6281-BP Development Board";
-	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/kirkwood-db-88f6282.dts b/src/arm/kirkwood-db-88f6282.dts
deleted file mode 100644
index 701c6b6cdaa2..000000000000
--- a/src/arm/kirkwood-db-88f6282.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Marvell DB-88F6282-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Marvell DB-88F6282-BP Development Board";
-	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/kirkwood-db.dtsi b/src/arm/kirkwood-db.dtsi
deleted file mode 100644
index 812df691ae3d..000000000000
--- a/src/arm/kirkwood-db.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the 6281
- * and 6282 variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pin-controller@10000 {
-			pmx_sdio_gpios: pmx-sdio-gpios {
-				marvell,pins = "mpp37", "mpp38";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio_gpios>;
-			pinctrl-names = "default";
-			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			status = "okay";
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "root";
-		reg = <0x500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-dns320.dts b/src/arm/kirkwood-dns320.dts
deleted file mode 100644
index d85ef0a91b50..000000000000
--- a/src/arm/kirkwood-dns320.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-dnskw.dtsi"
-
-/ {
-	model = "D-Link DNS-320 NAS (Rev A1)";
-	compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320
-			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
-			     &pmx_led_white_usb>;
-		pinctrl-names = "default";
-
-		blue-power {
-			label = "dns320:blue:power";
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		blue-usb {
-			label = "dns320:blue:usb";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-		orange-l_hdd {
-			label = "dns320:orange:l_hdd";
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-		orange-r_hdd {
-			label = "dns320:orange:r_hdd";
-			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		};
-		orange-usb {
-			label = "dns320:orange:usb";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
-		};
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-dns325.dts b/src/arm/kirkwood-dns325.dts
deleted file mode 100644
index 5e586ed04c58..000000000000
--- a/src/arm/kirkwood-dns325.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-dnskw.dtsi"
-
-/ {
-	model = "D-Link DNS-325 NAS (Rev A1)";
-	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
-			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
-			     &pmx_led_white_usb>;
-		pinctrl-names = "default";
-
-		white-power {
-			label = "dns325:white:power";
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		white-usb {
-			label = "dns325:white:usb";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
-		};
-		red-l_hdd {
-			label = "dns325:red:l_hdd";
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-		red-r_hdd {
-			label = "dns325:red:r_hdd";
-			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		};
-		red-usb {
-			label = "dns325:red:usb";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-
-			lm75: lm75@48 {
-				compatible = "national,lm75";
-				reg = <0x48>;
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-dnskw.dtsi b/src/arm/kirkwood-dnskw.dtsi
deleted file mode 100644
index 113dcf056dcf..000000000000
--- a/src/arm/kirkwood-dnskw.dtsi
+++ /dev/null
@@ -1,234 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "D-Link DNS NASes (kirkwood-based)";
-	compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
-			     &pmx_button_reset>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Power button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "USB unmount button";
-			linux,code = <KEY_EJECTCD>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Reset button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_fan {
-		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 14 GPIO_ACTIVE_LOW
-			 &gpio1 13 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_power_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
-				     &pmx_present_sata1 &pmx_fan_tacho
-				     &pmx_temp_alarm>;
-			pinctrl-names = "default";
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp20";
-				marvell,function = "sata1";
-			};
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp21";
-				marvell,function = "sata0";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp26";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_right_hdd: pmx-led-red-right-hdd {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_left_hdd: pmx-led-red-left-hdd {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_usb_325: pmx-led-red-usb-325 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_red_usb_320: pmx-led-red-usb-320 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_power_off: pmx-power-off {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_power_back_on: pmx-power-back-on {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_power_sata0: pmx-power-sata0 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_power_sata1: pmx-power-sata1 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_present_sata0: pmx-present-sata0 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_present_sata1: pmx-present-sata1 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_white_usb: pmx-led-white-usb {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_fan_tacho: pmx-fan-tacho {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high_speed: pmx-fan-high-speed {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_fan_low_speed: pmx-fan-low-speed {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_button_unmount: pmx-button-unmount {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_temp_alarm: pmx-temp-alarm {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 7 0>;
-		};
-		sata1_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 8 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <35>;
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x500000>;
-	};
-
-	partition@600000 {
-		label = "ramdisk";
-		reg = <0x0600000 0x500000>;
-	};
-
-	partition@b00000 {
-		label = "image";
-		reg = <0x0b00000 0x6600000>;
-	};
-
-	partition@7100000 {
-		label = "mini firmware";
-		reg = <0x7100000 0xa00000>;
-	};
-
-	partition@7b00000 {
-		label = "config";
-		reg = <0x7b00000 0x500000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-dockstar.dts b/src/arm/kirkwood-dockstar.dts
deleted file mode 100644
index 849736349511..000000000000
--- a/src/arm/kirkwood-dockstar.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Seagate FreeAgent Dockstar";
-	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led-green {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_orange: pmx-led-orange {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
-		pinctrl-names = "default";
-
-		health {
-			label = "status:green:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		fault {
-			label = "status:orange:fault";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "data";
-		reg = <0x0500000 0xfb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		compatible = "marvell,88e1116";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-dreamplug.dts b/src/arm/kirkwood-dreamplug.dts
deleted file mode 100644
index 6467c7924195..000000000000
--- a/src/arm/kirkwood-dreamplug.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Globalscale Technologies Dreamplug";
-	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_bluetooth: pmx-led-bluetooth {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_led_wifi: pmx-led-wifi {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_led_wifi_ap: pmx-led-wifi-ap {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p40@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l1606e";
-				reg = <0>;
-				spi-max-frequency = <50000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-
-				partition@100000 {
-					reg = <0x100000 0x10000>;
-					label = "u-boot env";
-				};
-
-				partition@180000 {
-					reg = <0x180000 0x10000>;
-					label = "dtb";
-				};
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-			broken-cd;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
-			     &pmx_led_wifi_ap >;
-		pinctrl-names = "default";
-
-		bluetooth {
-			label = "dreamplug:blue:bluetooth";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		wifi {
-			label = "dreamplug:green:wifi";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-		wifi-ap {
-			label = "dreamplug:green:wifi_ap";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-ds109.dts b/src/arm/kirkwood-ds109.dts
deleted file mode 100644
index d4bcc1c7f6b3..000000000000
--- a/src/arm/kirkwood-ds109.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS109, DS110, DS110jv20";
-	compatible = "synology,ds109", "synology,ds110jv20",
-		     "synology,ds110", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "okay";
-	};
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds110jv10.dts b/src/arm/kirkwood-ds110jv10.dts
deleted file mode 100644
index 95bf83b91b4a..000000000000
--- a/src/arm/kirkwood-ds110jv10.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS110j v10 and v30";
-	compatible = "synology,ds110jv10", "synology,ds110jv30",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds111.dts b/src/arm/kirkwood-ds111.dts
deleted file mode 100644
index 61f47fbe44d0..000000000000
--- a/src/arm/kirkwood-ds111.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS111";
-	compatible = "synology,ds111", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds112.dts b/src/arm/kirkwood-ds112.dts
deleted file mode 100644
index bf4143c6cb8f..000000000000
--- a/src/arm/kirkwood-ds112.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS111";
-	compatible = "synology,ds111", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-21-2 {
-		status = "okay";
-	};
-
-	regulators-hdd-30 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds209.dts b/src/arm/kirkwood-ds209.dts
deleted file mode 100644
index 6d25093a9ac4..000000000000
--- a/src/arm/kirkwood-ds209.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS209";
-	compatible = "synology,ds209", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-
-	regulators-hdd-31 {
-		status = "okay";
-	};
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds210.dts b/src/arm/kirkwood-ds210.dts
deleted file mode 100644
index 2f1933efcac1..000000000000
--- a/src/arm/kirkwood-ds210.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS210 v10, v20, v30, DS211j";
-	compatible = "synology,ds210jv10", "synology,ds210jv20",
-		     "synology,ds210jv30", "synology,ds211j",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-
-	regulators-hdd-31 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds212.dts b/src/arm/kirkwood-ds212.dts
deleted file mode 100644
index 99afd462f956..000000000000
--- a/src/arm/kirkwood-ds212.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
-	compatible = "synology,ds212", "synology,ds212pv10",
-		     "synology,ds212pv10", "synology,ds212pv20",
-		     "synology,ds213airv10", "synology,ds213v10",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds212j.dts b/src/arm/kirkwood-ds212j.dts
deleted file mode 100644
index f5c4213fc67c..000000000000
--- a/src/arm/kirkwood-ds212j.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS212j v10, v20";
-	compatible = "synology,ds212jv10", "synology,ds212jv20",
-		     "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds409.dts b/src/arm/kirkwood-ds409.dts
deleted file mode 100644
index e80a962ebba0..000000000000
--- a/src/arm/kirkwood-ds409.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS409, DS410j";
-	compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-
-	gpio-leds-alarm-12 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds409slim.dts b/src/arm/kirkwood-ds409slim.dts
deleted file mode 100644
index cae5af4b88b5..000000000000
--- a/src/arm/kirkwood-ds409slim.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology 409slim";
-	compatible = "synology,ds409slim", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-32-35 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-20 {
-		status = "okay";
-	};
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds411.dts b/src/arm/kirkwood-ds411.dts
deleted file mode 100644
index 623cd4a37d71..000000000000
--- a/src/arm/kirkwood-ds411.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS411, DS413jv10";
-	compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-
-	regulators-hdd-34 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds411j.dts b/src/arm/kirkwood-ds411j.dts
deleted file mode 100644
index 3348e330f074..000000000000
--- a/src/arm/kirkwood-ds411j.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS411j";
-	compatible = "synology,ds411j", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-
-	gpio-leds-alarm-12 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-ds411slim.dts b/src/arm/kirkwood-ds411slim.dts
deleted file mode 100644
index a0a1fad8b4de..000000000000
--- a/src/arm/kirkwood-ds411slim.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology DS411slim";
-	compatible = "synology,ds411slim", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-goflexnet.dts b/src/arm/kirkwood-goflexnet.dts
deleted file mode 100644
index aa60a0b049a7..000000000000
--- a/src/arm/kirkwood-goflexnet.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Seagate GoFlex Net";
-	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_0: pmx-led_right_cap_0 {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_1: pmx-led_right_cap_1 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_2: pmx-led_right_cap_2 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_led_right_cap_3: pmx-led_right_cap_3 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_0: pmx-led_left_cap_0 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_1: pmx-led_left_cap_1 {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_2: pmx-led_left_cap_2 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_led_left_cap_3: pmx-led_left_cap_3 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led_green {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_orange: pmx-led_orange {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_orange
-			      &pmx_led_left_cap_0 &pmx_led_left_cap_1
-			      &pmx_led_left_cap_2 &pmx_led_left_cap_3
-			      &pmx_led_right_cap_0 &pmx_led_right_cap_1
-			      &pmx_led_right_cap_2 &pmx_led_right_cap_3
-			    >;
-		pinctrl-names = "default";
-
-		health {
-			label = "status:green:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		fault {
-			label = "status:orange:fault";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		left0 {
-			label = "status:white:left0";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		left1 {
-			label = "status:white:left1";
-			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-		left2 {
-			label = "status:white:left2";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-		left3 {
-			label = "status:white:left3";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-		right0 {
-			label = "status:white:right0";
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-		right1 {
-			label = "status:white:right1";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		right2 {
-			label = "status:white:right2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-		right3 {
-			label = "status:white:right3";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	chip-delay = <40>;
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "pogoplug";
-		reg = <0x0500000 0x2000000>;
-	};
-
-	partition@2500000 {
-		label = "root";
-		reg = <0x02500000 0xd800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-guruplug-server-plus.dts b/src/arm/kirkwood-guruplug-server-plus.dts
deleted file mode 100644
index b2d9834bf458..000000000000
--- a/src/arm/kirkwood-guruplug-server-plus.dts
+++ /dev/null
@@ -1,132 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Globalscale Technologies Guruplug Server Plus";
-	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_health_r: pmx-led-health-r {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_health_g: pmx-led-health-g {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_led_wmode_r: pmx-led-wmode-r {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_led_wmode_g: pmx-led-wmode-g {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		/* AzureWave AW-GH381 WiFi/BT */
-		mvsdio@90000 {
-			status = "okay";
-			non-removable;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
-			      &pmx_led_wmode_r &pmx_led_wmode_g >;
-		pinctrl-names = "default";
-
-		health-r {
-			label = "guruplug:red:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-		health-g {
-			label = "guruplug:green:health";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		wmode-r {
-			label = "guruplug:red:wmode";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-		wmode-g {
-			label = "guruplug:green:wmode";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x00000000 0x00100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x00100000 0x00400000>;
-	};
-
-	partition@500000 {
-		label = "data";
-		reg = <0x00500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		/* Marvell 88E1121R */
-		compatible = "ethernet-phy-id0141.0cb0",
-		             "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		/* Marvell 88E1121R */
-		compatible = "ethernet-phy-id0141.0cb0",
-		             "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-		phy-connection-type = "rgmii-id";
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
diff --git a/src/arm/kirkwood-ib62x0.dts b/src/arm/kirkwood-ib62x0.dts
deleted file mode 100644
index bfa5edde179c..000000000000
--- a/src/arm/kirkwood-ib62x0.dts
+++ /dev/null
@@ -1,145 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_os_red: pmx-led-os-red {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-			pmx_power_off: pmx-power-off {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-			pmx_led_os_green: pmx-led-os-green {
-				marvell,pins = "mpp25";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb_transfer: pmx-led-usb-transfer {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_button_usb_copy: pmx-button-usb-copy {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
-			     &pmx_led_usb_transfer>;
-		pinctrl-names = "default";
-
-		green-os {
-			label = "ib62x0:green:os";
-			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		red-os {
-			label = "ib62x0:red:os";
-			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-		};
-		usb-copy {
-			label = "ib62x0:red:usb_copy";
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_power_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0xe0000>;
-	};
-
-	partition@e0000 {
-		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x600000>;
-	};
-
-	partition@700000 {
-		label = "root";
-		reg = <0x0700000 0xf900000>;
-	};
-
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-iconnect.dts b/src/arm/kirkwood-iconnect.dts
deleted file mode 100644
index 38e31d15a62d..000000000000
--- a/src/arm/kirkwood-iconnect.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Iomega Iconnect";
-	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-		linux,initrd-start = <0x4500040>;
-		linux,initrd-end   = <0x4800000>;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-			pmx_button_otb: pmx-button-otb {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_led_level: pmx-led-level {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_blue: pmx-led-power-blue {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_red: pmx-power-red {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb1: pmx-led-usb1 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb2: pmx-led-usb2 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb3: pmx-led-usb3 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_usb4: pmx-led-usb4 {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_led_otb: pmx-led-otb {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-		};
-		i2c@11000 {
-			status = "okay";
-
-			lm63: lm63@4c {
-				compatible = "national,lm63";
-				reg = <0x4c>;
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
-			      &pmx_led_power_red &pmx_led_usb1
-			      &pmx_led_usb2 &pmx_led_usb3
-			      &pmx_led_usb4 &pmx_led_otb >;
-		pinctrl-names = "default";
-
-		led-level {
-			label = "led_level";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-		power-blue {
-			label = "power:blue";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		power-red {
-			label = "power:red";
-			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-		usb1 {
-			label = "usb1:blue";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-		usb2 {
-			label = "usb2:blue";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-		usb3 {
-			label = "usb3:blue";
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		usb4 {
-			label = "usb4:blue";
-			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		};
-		otb {
-			label = "otb:blue";
-			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "OTB Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-		button@2 {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-			debounce-interval = <100>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0xc0000>;
-	};
-
-	partition@a0000 {
-		label = "env";
-		reg = <0xa0000 0x20000>;
-	};
-
-	partition@100000 {
-		label = "zImage";
-		reg = <0x100000 0x300000>;
-	};
-
-	partition@540000 {
-		label = "initrd";
-		reg = <0x540000 0x300000>;
-	};
-
-	partition@980000 {
-		label = "boot";
-		reg = <0x980000 0x1f400000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@11 {
-		reg = <11>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-iomega_ix2_200.dts b/src/arm/kirkwood-iomega_ix2_200.dts
deleted file mode 100644
index 05291f3990d0..000000000000
--- a/src/arm/kirkwood-iomega_ix2_200.dts
+++ /dev/null
@@ -1,221 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Iomega StorCenter ix2-200";
-	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
-				      &pmx_led_sata_brt_ctrl_2
-				      &pmx_led_backup_brt_ctrl_1
-				      &pmx_led_backup_brt_ctrl_2
-				      &pmx_led_power_brt_ctrl_1
-				      &pmx_led_power_brt_ctrl_2
-				      &pmx_led_health_brt_ctrl_1
-				      &pmx_led_health_brt_ctrl_2
-				      &pmx_led_rebuild_brt_ctrl_1
-				      &pmx_led_rebuild_brt_ctrl_2 >;
-			pinctrl-names = "default";
-
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-			pmx_led_backup: pmx-led-backup {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-			pmx_button_otb: pmx-button-otb {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_led_rebuild: pmx-led-rebuild {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_health: pmx-led_health {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-		};
-		i2c@11000 {
-			status = "okay";
-
-			lm63: lm63@4c {
-				compatible = "national,lm63";
-				reg = <0x4c>;
-			};
-		};
-
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_backup &pmx_led_power
-			      &pmx_led_rebuild &pmx_led_health >;
-		pinctrl-names = "default";
-
-		power_led {
-			label = "status:white:power_led";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-		};
-		rebuild_led {
-			label = "status:white:rebuild_led";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		};
-		health_led {
-			label = "status:red:health_led";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		};
-		backup_led {
-			label = "status:blue:backup_led";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_reset &pmx_button_power
-			     &pmx_button_otb>;
-		pinctrl-names = "default";
-
-
-		Power {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-		};
-		Reset {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		};
-		OTB {
-			label = "OTB Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@a0000 {
-		label = "env";
-		reg = <0xa0000 0x20000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x300000>;
-	};
-
-	partition@400000 {
-		label = "uInitrd";
-		reg = <0x540000 0x1000000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@11 {
-		reg = <11>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		speed = <1000>;
-		duplex = <1>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-is2.dts b/src/arm/kirkwood-is2.dts
deleted file mode 100644
index da674bbd49a8..000000000000
--- a/src/arm/kirkwood-is2.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Internet Space v2";
-	compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-km_common.dtsi b/src/arm/kirkwood-km_common.dtsi
deleted file mode 100644
index 8367c772c764..000000000000
--- a/src/arm/kirkwood-km_common.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
-			pinctrl-names = "default";
-
-			pmx_i2c_gpio_sda: pmx-gpio-sda {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_i2c_gpio_scl: pmx-gpio-scl {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-	};
-
-	i2c@0 {
-		compatible = "i2c-gpio";
-		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
-			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
-		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <25>;
-};
diff --git a/src/arm/kirkwood-km_fixedeth.dts b/src/arm/kirkwood-km_fixedeth.dts
deleted file mode 100644
index 9895f2b10f8a..000000000000
--- a/src/arm/kirkwood-km_fixedeth.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-98dx4122.dtsi"
-#include "kirkwood-km_common.dtsi"
-
-/ {
-	model = "Keymile Kirkwood Fixed Eth";
-	compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		speed = <1000>;  /* <SPEED_1000> */
-		duplex = <1>; /* <DUPLEX_FULL> */
-	};
-};
diff --git a/src/arm/kirkwood-km_kirkwood.dts b/src/arm/kirkwood-km_kirkwood.dts
deleted file mode 100644
index 235bf382fff9..000000000000
--- a/src/arm/kirkwood-km_kirkwood.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-98dx4122.dtsi"
-#include "kirkwood-km_common.dtsi"
-
-/ {
-	model = "Keymile Kirkwood Reference Design";
-	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-laplug.dts b/src/arm/kirkwood-laplug.dts
deleted file mode 100644
index 24425660e973..000000000000
--- a/src/arm/kirkwood-laplug.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "LaCie LaPlug";
-	compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>; /* 128 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			eeprom@50 {
-				compatible = "atmel,24c04";
-				pagesize = <16>;
-				reg = <0x50>;
-			};
-		};
-
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button@1{
-			label = "Power push button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "laplug_v2:red:power";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		blue-power {
-			label = "laplug_v2:blue:power";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power_back1: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power Back 1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb_power_back2: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "USB Power Back 2";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb_power_front: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "USB Power Front";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	/* Total size : 512MB */
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0 0x100000>; /* 1MB */
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x1000000>; /* 16MB */
-	};
-
-	partition@1100000 {
-		label = "rootfs";
-		reg = <0x1100000 0x1EF00000>; /* 495MB */
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-lschlv2.dts b/src/arm/kirkwood-lschlv2.dts
deleted file mode 100644
index e2fa368aef25..000000000000
--- a/src/arm/kirkwood-lschlv2.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-lsxl.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-CHLv2";
-	compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x4000000>;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-lsxhl.dts b/src/arm/kirkwood-lsxhl.dts
deleted file mode 100644
index 8d89cdf8d6bf..000000000000
--- a/src/arm/kirkwood-lsxhl.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-lsxl.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-XHL";
-	compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-lsxl.dtsi b/src/arm/kirkwood-lsxl.dtsi
deleted file mode 100644
index 53484474df1f..000000000000
--- a/src/arm/kirkwood-lsxl.dtsi
+++ /dev/null
@@ -1,236 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd: pmx-power-hdd {
-				marvell,pins = "mpp10";
-				marvell,function = "gpo";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,pins = "mpp11";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high: pmx-fan-high {
-				marvell,pins = "mpp18";
-				marvell,function = "gpo";
-			};
-			pmx_fan_low: pmx-fan-low {
-				marvell,pins = "mpp19";
-				marvell,function = "gpo";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_fan_lock: pmx-fan-lock {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function_red {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-		};
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p40@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p40";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x60000>;
-					label = "uboot";
-					read-only;
-				};
-
-				partition@60000 {
-					reg = <0x60000 0x10000>;
-					label = "dtb";
-					read-only;
-				};
-
-				partition@70000 {
-					reg = <0x70000 0x10000>;
-					label = "uboot_env";
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_function &pmx_power_switch
-			     &pmx_power_auto_switch>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Function Button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Power-on Switch";
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <5>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Power-auto Switch";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "lsxl:blue:func";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		led@2 {
-			label = "lsxl:red:alarm";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-
-		led@3 {
-			label = "lsxl:amber:info";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		led@4 {
-			label = "lsxl:blue:power";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		led@5 {
-			label = "lsxl:red:func";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
-		         &gpio0 18 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map = <0    3
-		                      1500 2
-		                      3250 1
-		                      5000 0>;
-		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-
-	restart_poweroff {
-		compatible = "restart-poweroff";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 11 0>;
-		};
-		hdd_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 10 0>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-mplcec4.dts b/src/arm/kirkwood-mplcec4.dts
deleted file mode 100644
index f3a991837515..000000000000
--- a/src/arm/kirkwood-mplcec4.dts
+++ /dev/null
@@ -1,217 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "MPL CEC4";
-	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-        memory {
-                device_type = "memory";
-                reg = <0x00000000 0x20000000>;
-        };
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_led_health: pmx-led-health {
-				marvell,pins = "mpp7";
-				marvell,function = "gpo";
-			};
-
-			pmx_sata1: pmx-sata1 {
-				marvell,pins = "mpp34";
-				marvell,function = "sata1";
-			};
-
-			pmx_sata0: pmx-sata0 {
-				marvell,pins = "mpp35";
-				marvell,function = "sata0";
-			};
-
-			pmx_led_user1o: pmx-led-user1o {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_user1g: pmx-led-user1g {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_user0o: pmx-led-user0o {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_user0g: pmx-led-user0g {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_misc: pmx-led-misc {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-
-                i2c@11000 {
-                        status = "okay";
-
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-
-			eeprom@57 {
-				compatible = "atmel,24c02";
-				reg = <0x57>;
-			};
-
-                };
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		rtc@10300 {
-			status = "disabled";
-		};
-
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
-			pinctrl-names = "default";
-			status = "okay";
-			cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			/* No WP GPIO */
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_health
-			      &pmx_led_user1o
-			      &pmx_led_user1g &pmx_led_user0o
-			      &pmx_led_user0g &pmx_led_misc
-			    >;
-		pinctrl-names = "default";
-
-		health {
-			label = "status:green:health";
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		};
-
-		user1o {
-			label = "user1:orange";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user1g {
-			label = "user1:green";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user0o {
-			label = "user0:orange";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		user0g {
-			label = "user0:green";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		misc {
-			label = "status:orange:misc";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "env";
-		reg = <0x100000 0x80000>;
-	};
-
-	partition@180000 {
-		label = "fdt";
-		reg = <0x180000 0x80000>;
-	};
-
-	partition@200000 {
-		label = "kernel";
-		reg = <0x200000 0x400000>;
-	};
-
-	partition@600000 {
-		label = "rootfs";
-		reg = <0x600000 0x1fa00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-
-	ethphy1: ethernet-phy@2 {
-		reg = <2>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-mv88f6281gtw-ge.dts b/src/arm/kirkwood-mv88f6281gtw-ge.dts
deleted file mode 100644
index 8f76d28759a3..000000000000
--- a/src/arm/kirkwood-mv88f6281gtw-ge.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Marvell 88F6281 GTW GE Board
- *
- * Lennert Buytenhek <buytenh@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the 6281
- * and 6282 variants of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Marvell 88F6281 GTW GE Board";
-	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-        };
-
-	ocp@f1000000 {
-		pin-controller@10000 {
-			pmx_usb_led: pmx-usb-led {
-				marvell,pins = "mpp12";
-				marvell,function = "gpo";
-			};
-
-			pmx_leds: pmx-leds {
-				marvell,pins = "mpp20", "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_keys: pmx-keys {
-				marvell,pins = "mpp46", "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l12805d";
-				reg = <0>;
-				spi-max-frequency = <50000000>;
-				mode = <0>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
-		pinctrl-names = "default";
-
-		green-status {
-			label = "gtw:green:Status";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-		};
-
-		red-status {
-			label = "gtw:red:Status";
-			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		green-usb {
-			label = "gtw:green:USB";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_keys>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "SWR Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "WPS Button";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	dsa@0 {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0>;
-		dsa,mii-bus = <&ethphy0>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@ff {
-		reg = <0xff>; 	/* No phy attached */
-		speed = <1000>;
-		duplex = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-net2big.dts b/src/arm/kirkwood-net2big.dts
deleted file mode 100644
index 53dc37a3b687..000000000000
--- a/src/arm/kirkwood-net2big.dts
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Device Tree file for LaCie 2Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-netxbig.dtsi"
-
-/ {
-	model = "LaCie 2Big Network v2";
-	compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-};
-
-&regulators {
-	regulator@2 {
-		compatible = "regulator-fixed";
-		reg = <2>;
-		regulator-name = "hdd1power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
-	};
-};
-
-&i2c0 {
-	g762@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-		clocks = <&g762_clk>;
-	};
-};
diff --git a/src/arm/kirkwood-net5big.dts b/src/arm/kirkwood-net5big.dts
deleted file mode 100644
index 36155b749d9f..000000000000
--- a/src/arm/kirkwood-net5big.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Device Tree file for LaCie 5Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-netxbig.dtsi"
-
-/ {
-	model = "LaCie 5Big Network v2";
-	compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-};
-
-&regulators {
-	regulator@2 {
-		compatible = "regulator-fixed";
-		reg = <2>;
-		regulator-name = "hdd1power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulator@3 {
-		compatible = "regulator-fixed";
-		reg = <3>;
-		regulator-name = "hdd2power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulator@4 {
-		compatible = "regulator-fixed";
-		reg = <4>;
-		regulator-name = "hdd3power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulator@5 {
-		compatible = "regulator-fixed";
-		reg = <5>;
-		regulator-name = "hdd4power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
-	};
-};
-
-&mdio {
-	ethphy1: ethernet-phy@1 {
-		reg = <0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
-
-&i2c0 {
-	g762@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-		clocks = <&g762_clk>;
-	};
-};
diff --git a/src/arm/kirkwood-netgear_readynas_duo_v2.dts b/src/arm/kirkwood-netgear_readynas_duo_v2.dts
deleted file mode 100644
index fd733c63bc27..000000000000
--- a/src/arm/kirkwood-netgear_readynas_duo_v2.dts
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS Duo v2
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS Duo v2";
-	compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_backup: pmx-button-backup {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_power: pmx-led-blue-power {
-				marvell,pins = "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_activity: pmx-led-blue-activity {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk1: pmx-led-blue-disk1 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk2: pmx-led-blue-disk2 {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_backup: pmx-led-blue-backup {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_poweroff: pmx-poweroff {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-		};
-
-		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			rs5c372a: rs5c372a@32 {
-				compatible = "ricoh,rs5c372a";
-				reg = <0x32>;
-			};
-
-			g762: g762@3e {
-				compatible = "gmt,g762";
-				reg = <0x3e>;
-				clocks = <&g762_clk>; /* input clock */
-				fan_gear_mode = <0>;
-				fan_startv = <1>;
-				pwm_polarity = <0>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_activity
-			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
-			      &pmx_led_blue_backup >;
-		pinctrl-names = "default";
-
-		power_led {
-			label = "status:blue:power_led";
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		activity_led {
-			label = "status:blue:activity_led";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		disk1_led {
-			label = "status:blue:disk1_led";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		disk2_led {
-			label = "status:blue:disk2_led";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-
-		backup_led {
-			label = "status:blue:backup_led";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_button_power &pmx_button_backup
-			     &pmx_button_reset>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_regulator: usb3-regulator {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB 3.0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x180000>;
-		read-only;
-	};
-
-	partition@180000 {
-		label = "u-boot-env";
-		reg = <0x180000 0x20000>;
-	};
-
-	partition@200000 {
-		label = "uImage";
-		reg = <0x0200000 0x600000>;
-	};
-
-	partition@800000 {
-		label = "minirootfs";
-		reg = <0x0800000 0x1000000>;
-	};
-
-	partition@1800000 {
-		label = "jffs2";
-		reg = <0x1800000 0x6800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-netgear_readynas_nv+_v2.dts b/src/arm/kirkwood-netgear_readynas_nv+_v2.dts
deleted file mode 100644
index b514d643fb6c..000000000000
--- a/src/arm/kirkwood-netgear_readynas_nv+_v2.dts
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Device Tree file for NETGEAR ReadyNAS NV+ v2
- *
- * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "NETGEAR ReadyNAS NV+ v2";
-	compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to NEC uPD720200 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_button_power: pmx-button-power {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_backup: pmx-button-backup {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_button_reset: pmx-button-reset {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_power: pmx-led-blue-power {
-				marvell,pins = "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_backup: pmx-led-blue-backup {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk1: pmx-led-blue-disk1 {
-				marvell,pins = "mpp20";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk2: pmx-led-blue-disk2 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk3: pmx-led-blue-disk3 {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_blue_disk4: pmx-led-blue-disk4 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_poweroff: pmx-poweroff {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-		};
-
-		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			rs5c372a: rs5c372a@32 {
-				compatible = "ricoh,rs5c372a";
-				reg = <0x32>;
-			};
-
-			g762: g762@3e {
-				compatible = "gmt,g762";
-				reg = <0x3e>;
-				clocks = <&g762_clk>; /* input clock */
-				fan_gear_mode = <0>;
-				fan_startv = <1>;
-				pwm_polarity = <0>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
-			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
-			      &pmx_led_blue_disk3 &pmx_led_blue_disk3 >;
-		pinctrl-names = "default";
-
-		power_led {
-			label = "status:blue:power_led";
-			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		backup_led {
-			label = "status:blue:backup_led";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-
-		disk1_led {
-			label = "status:blue:disk1_led";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		};
-
-		disk2_led {
-			label = "status:blue:disk2_led";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		disk3_led {
-			label = "status:blue:disk3_led";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		disk4_led {
-			label = "status:blue:disk4_led";
-			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_button_power &pmx_button_backup
-			     &pmx_button_reset>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-
-		reset-button {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-
-		backup-button {
-			label = "Backup Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_poweroff>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_regulator: usb3-regulator {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB 3.0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x180000>;
-		read-only;
-	};
-
-	partition@180000 {
-		label = "u-boot-env";
-		reg = <0x180000 0x20000>;
-	};
-
-	partition@200000 {
-		label = "uImage";
-		reg = <0x0200000 0x600000>;
-	};
-
-	partition@800000 {
-		label = "minirootfs";
-		reg = <0x0800000 0x1000000>;
-	};
-
-	partition@1800000 {
-		label = "jffs2";
-		reg = <0x1800000 0x6800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
-		device_type = "ethernet-phy";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-netxbig.dtsi b/src/arm/kirkwood-netxbig.dtsi
deleted file mode 100644
index b0cfb7cd30b9..000000000000
--- a/src/arm/kirkwood-netxbig.dtsi
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Device Tree common file for LaCie 2Big and 5Big Network v2
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * Based on netxbig_v2-setup.c,
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/*
-		 * button@1 and button@2 represent a three position rocker
-		 * switch. Thus the conventional KEY_POWER does not fit
-		 */
-		button@1 {
-			label = "Back power switch (on|auto)";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Back power switch (auto|off)";
-			linux,code = <KEY_1>;
-			linux,input-type = <5>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Function button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators: regulators {
-		status = "okay";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd0power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <8>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-
-	pmx_button_function: pmx-button-function {
-		marvell,pins = "mpp34";
-		marvell,function = "gpio";
-	};
-	pmx_button_power_off: pmx-button-power-off {
-		marvell,pins = "mpp15";
-		marvell,function = "gpio";
-	};
-	pmx_button_power_on: pmx-button-power-on {
-		marvell,pins = "mpp13";
-		marvell,function = "gpio";
-	};
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-};
diff --git a/src/arm/kirkwood-ns2-common.dtsi b/src/arm/kirkwood-ns2-common.dtsi
deleted file mode 100644
index fe6c0246db1a..000000000000
--- a/src/arm/kirkwood-ns2-common.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_ns2_sata0: pmx-ns2-sata0 {
-				marvell,pins = "mpp21";
-				marvell,function = "sata0";
-			};
-			pmx_ns2_sata1: pmx-ns2-sata1 {
-				marvell,pins = "mpp20";
-				marvell,function = "sata1";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			eeprom@50 {
-				compatible = "atmel,24c04";
-				pagesize = <16>;
-				reg = <0x50>;
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Power push button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		red-fail {
-			label = "ns2:red:fail";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-	};
-
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy {
-                /* overwrite reg property in board file */
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-ns2.dts b/src/arm/kirkwood-ns2.dts
deleted file mode 100644
index 53368d1022cc..000000000000
--- a/src/arm/kirkwood-ns2.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Network Space v2";
-	compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-ns2lite.dts b/src/arm/kirkwood-ns2lite.dts
deleted file mode 100644
index 1f2ca60d8b3d..000000000000
--- a/src/arm/kirkwood-ns2lite.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Network Space Lite v2";
-	compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
diff --git a/src/arm/kirkwood-ns2max.dts b/src/arm/kirkwood-ns2max.dts
deleted file mode 100644
index 72c78d0b1116..000000000000
--- a/src/arm/kirkwood-ns2max.dts
+++ /dev/null
@@ -1,53 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	model = "LaCie Network Space Max v2";
-	compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
-			 &gpio0  7 GPIO_ACTIVE_LOW
-			 &gpio1  1 GPIO_ACTIVE_LOW
-			 &gpio0 23 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map =
-			<   0  0
-			 1500 15
-			 1700 14
-			 1800 13
-			 2100 12
-			 3100 11
-			 3300 10
-			 4300  9
-			 5500  8>;
-		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-ns2mini.dts b/src/arm/kirkwood-ns2mini.dts
deleted file mode 100644
index c441bf62c09f..000000000000
--- a/src/arm/kirkwood-ns2mini.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-ns2-common.dtsi"
-
-/ {
-	/* This machine is embedded in the first LaCie CloudBox product. */
-	model = "LaCie Network Space Mini v2";
-	compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	ocp@f1000000 {
-		sata@80000 {
-			pinctrl-0 = <&pmx_ns2_sata0>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <1>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
-			 &gpio0  7 GPIO_ACTIVE_LOW
-			 &gpio1  1 GPIO_ACTIVE_LOW
-			 &gpio0 23 GPIO_ACTIVE_LOW>;
-		gpio-fan,speed-map =
-			<   0  0
-			 3000 15
-			 3180 14
-			 4140 13
-			 4570 12
-			 6760 11
-			 7140 10
-			 7980  9
-			 9200  8>;
-		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-	};
-
-	ns2-leds {
-		compatible = "lacie,ns2-leds";
-
-		blue-sata {
-			label = "ns2:blue:sata";
-			slow-gpio = <&gpio0 29 0>;
-			cmd-gpio = <&gpio0 30 0>;
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
diff --git a/src/arm/kirkwood-nsa310-common.dtsi b/src/arm/kirkwood-nsa310-common.dtsi
deleted file mode 100644
index aa78c2d11fe7..000000000000
--- a/src/arm/kirkwood-nsa310-common.dtsi
+++ /dev/null
@@ -1,107 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "ZyXEL NSA310";
-
-	ocp@f1000000 {
-		pinctrl: pinctrl@10000 {
-
-			pmx_usb_power_off: pmx-usb-power-off {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-			pmx_pwr_off: pmx-pwr-off {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-		};
-
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_pwr_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_off>;
-		pinctrl-names = "default";
-
-		usb0_power_off: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power Off";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <35>;
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0x0100000>;
-		read-only;
-	};
-	partition@100000 {
-		label = "uboot_env";
-		reg = <0x0100000 0x0080000>;
-	};
-	partition@180000 {
-		label = "key_store";
-		reg = <0x0180000 0x0080000>;
-	};
-	partition@200000 {
-		label = "info";
-		reg = <0x0200000 0x0080000>;
-	};
-	partition@280000 {
-		label = "etc";
-		reg = <0x0280000 0x0a00000>;
-	};
-	partition@c80000 {
-		label = "kernel_1";
-		reg = <0x0c80000 0x0a00000>;
-	};
-	partition@1680000 {
-		label = "rootfs1";
-		reg = <0x1680000 0x2fc0000>;
-	};
-	partition@4640000 {
-		label = "kernel_2";
-		reg = <0x4640000 0x0a00000>;
-	};
-	partition@5040000 {
-		label = "rootfs2";
-		reg = <0x5040000 0x2fc0000>;
-	};
-};
diff --git a/src/arm/kirkwood-nsa310.dts b/src/arm/kirkwood-nsa310.dts
deleted file mode 100644
index 6139df0f376c..000000000000
--- a/src/arm/kirkwood-nsa310.dts
+++ /dev/null
@@ -1,140 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/ {
-	compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_unknown>;
-			pinctrl-names = "default";
-
-			pmx_led_esata_green: pmx-led-esata-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_esata_red: pmx-led-esata-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_red: pmx-led-usb-red {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_red: pmx-led-sys-red {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_green: pmx-led-hdd-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_red: pmx-led-hdd-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_unknown: pmx-unknown {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			adt7476: adt7476a@2e {
-				compatible = "adi,adt7476";
-				reg = <0x2e>;
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
-			     &pmx_led_usb_green &pmx_led_usb_red
-			     &pmx_led_sys_green &pmx_led_sys_red
-			     &pmx_led_copy_green &pmx_led_copy_red
-			     &pmx_led_hdd_green &pmx_led_hdd_red>;
-		pinctrl-names = "default";
-
-		green-sys {
-			label = "nsa310:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		red-sys {
-			label = "nsa310:red:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd {
-			label = "nsa310:green:hdd";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd {
-			label = "nsa310:red:hdd";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		green-esata {
-			label = "nsa310:green:esata";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		red-esata {
-			label = "nsa310:red:esata";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-		green-usb {
-			label = "nsa310:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		red-usb {
-			label = "nsa310:red:usb";
-			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		};
-		green-copy {
-			label = "nsa310:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		red-copy {
-			label = "nsa310:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/kirkwood-nsa310a.dts b/src/arm/kirkwood-nsa310a.dts
deleted file mode 100644
index 3d2b3d494c19..000000000000
--- a/src/arm/kirkwood-nsa310a.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/*
- * There are at least two different NSA310 designs. This variant does
- * not have the red USB Led.
- */
-
-/ {
-	compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			pmx_led_esata_green: pmx-led-esata-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_esata_red: pmx-led-esata-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_red: pmx-led-sys-red {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_green: pmx-led-hdd-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd_red: pmx-led-hdd-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			lm85: lm85@2e {
-				compatible = "national,lm85";
-				reg = <0x2e>;
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		green-sys {
-			label = "nsa310:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		red-sys {
-			label = "nsa310:red:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd {
-			label = "nsa310:green:hdd";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd {
-			label = "nsa310:red:hdd";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		green-esata {
-			label = "nsa310:green:esata";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		red-esata {
-			label = "nsa310:red:esata";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-		green-usb {
-			label = "nsa310:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		green-copy {
-			label = "nsa310:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		red-copy {
-			label = "nsa310:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/kirkwood-nsa320.dts b/src/arm/kirkwood-nsa320.dts
deleted file mode 100644
index 24f686d1044d..000000000000
--- a/src/arm/kirkwood-nsa320.dts
+++ /dev/null
@@ -1,215 +0,0 @@
-/* Device tree file for the Zyxel NSA 320 NAS box.
- *
- * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Based upon the board setup file created by Peter Schildmann */
-
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/ {
-	model = "Zyxel NSA320";
-	compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			/* SATA Activity and Present pins are not connected */
-			pmx_sata0: pmx-sata0 {
-				marvell,pins ;
-				marvell,function = "sata0";
-			};
-
-			pmx_sata1: pmx-sata1 {
-				marvell,pins ;
-				marvell,function = "sata1";
-			};
-
-			pmx_led_hdd2_green: pmx-led-hdd2-green {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd2_red: pmx-led-hdd2-red {
-				marvell,pins = "mpp13";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_data: pmx-mcu-data {
-				marvell,pins = "mpp14";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_usb_green: pmx-led-usb-green {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_clk: pmx-mcu-clk {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_mcu_act: pmx-mcu-act {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_green: pmx-led-sys-green {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_orange: pmx-led-sys-orange {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd1_green: pmx-led-hdd1-green {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_hdd1_red: pmx-led-hdd1-red {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_htp: pmx-htp {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-
-			/* Buzzer needs to be switched at around 1kHz so is
-			   not compatible with the gpio-beeper driver. */
-			pmx_buzzer: pmx-buzzer {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_vid_b1: pmx-vid-b1 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_resume_data: pmx-power-resume-data {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_resume_clk: pmx-power-resume-clk {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			pcf8563: pcf8563@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-	};
-
-	regulators {
-		usb0_power: regulator@1 {
-			enable-active-high;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
-			     &pmx_led_usb_green
-			     &pmx_led_sys_green &pmx_led_sys_orange
-			     &pmx_led_copy_green &pmx_led_copy_red
-			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
-		pinctrl-names = "default";
-
-		green-sys {
-			label = "nsa320:green:sys";
-			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		orange-sys {
-			label = "nsa320:orange:sys";
-			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd1 {
-			label = "nsa320:green:hdd1";
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd1 {
-			label = "nsa320:red:hdd1";
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-		green-hdd2 {
-			label = "nsa320:green:hdd2";
-			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		red-hdd2 {
-			label = "nsa320:red:hdd2";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-		green-usb {
-			label = "nsa320:green:usb";
-			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-		};
-		green-copy {
-			label = "nsa320:green:copy";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		};
-		red-copy {
-			label = "nsa320:red:copy";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	/* The following pins are currently not assigned to a driver,
-	   some of them should be configured as inputs.
-	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
-		     &pmx_htp &pmx_vid_b1
-		     &pmx_power_resume_data &pmx_power_resume_clk>; */
-};
-
-&mdio {
-	status = "okay";
-	ethphy0: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-nsa3x0-common.dtsi b/src/arm/kirkwood-nsa3x0-common.dtsi
deleted file mode 100644
index 2075a2e828f1..000000000000
--- a/src/arm/kirkwood-nsa3x0-common.dtsi
+++ /dev/null
@@ -1,159 +0,0 @@
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "ZyXEL NSA310";
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pmx_usb_power: pmx-usb-power {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_pwr_off: pmx-pwr-off {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_reset: pmx-btn-reset {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_copy: pmx-btn-copy {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_power: pmx-btn-power {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_green: pmx-led-copy-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_red: pmx-led-copy-red {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_pwr_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			label = "Copy Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power>;
-		pinctrl-names = "default";
-
-		usb0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	chip-delay = <35>;
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0000000 0x0100000>;
-		read-only;
-	};
-	partition@100000 {
-		label = "uboot_env";
-		reg = <0x0100000 0x0080000>;
-	};
-	partition@180000 {
-		label = "key_store";
-		reg = <0x0180000 0x0080000>;
-	};
-	partition@200000 {
-		label = "info";
-		reg = <0x0200000 0x0080000>;
-	};
-	partition@280000 {
-		label = "etc";
-		reg = <0x0280000 0x0a00000>;
-	};
-	partition@c80000 {
-		label = "kernel_1";
-		reg = <0x0c80000 0x0a00000>;
-	};
-	partition@1680000 {
-		label = "rootfs1";
-		reg = <0x1680000 0x2fc0000>;
-	};
-	partition@4640000 {
-		label = "kernel_2";
-		reg = <0x4640000 0x0a00000>;
-	};
-	partition@5040000 {
-		label = "rootfs2";
-		reg = <0x5040000 0x2fc0000>;
-	};
-};
diff --git a/src/arm/kirkwood-openblocks_a6.dts b/src/arm/kirkwood-openblocks_a6.dts
deleted file mode 100644
index fb9dc227255d..000000000000
--- a/src/arm/kirkwood-openblocks_a6.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Plat'Home OpenBlocksA6";
-	compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <1>;
-			status = "okay";
-		};
-
-		i2c@11100 {
-			status = "okay";
-
-			s35390a: s35390a@30 {
-				compatible = "sii,s35390a";
-				reg = <0x30>;
-			};
-		};
-
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
-			pinctrl-names = "default";
-
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11", "mpp15",
-					"mpp16";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14", "mpp8",
-					"mpp9";
-				marvell,function = "uart1";
-			};
-
-			pmx_sysrst: pmx-sysrst {
-				marvell,pins = "mpp6";
-				marvell,function = "sysrst";
-			};
-
-			pmx_dip_switches: pmx-dip-switches {
-				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_header: pmx-gpio-header {
-				marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
-					       "mpp28", "mpp29", "mpp30", "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_init: pmx-init {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_usb_oc: pmx-usb-oc {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_leds: pmx-leds {
-				marvell,pins = "mpp41", "mpp42", "mpp43";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds>;
-		pinctrl-names = "default";
-
-		led-red {
-			label = "obsa6:red:stat";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		led-green {
-			label = "obsa6:green:stat";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		led-yellow {
-			label = "obsa6:yellow:stat";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-        };
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_gpio_init>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Init Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x90000>;
-	};
-
-	partition@90000 {
-		label = "env";
-		reg = <0x90000 0x44000>;
-	};
-
-	partition@d4000 {
-		label = "test";
-		reg = <0xd4000 0x24000>;
-	};
-
-	partition@f4000 {
-		label = "conf";
-		reg = <0xf4000 0x400000>;
-	};
-
-	partition@4f4000 {
-		label = "linux";
-		reg = <0x4f4000 0x1d20000>;
-	};
-
-	partition@2214000 {
-		label = "user";
-		reg = <0x2214000 0x1dec000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-openblocks_a7.dts b/src/arm/kirkwood-openblocks_a7.dts
deleted file mode 100644
index d5e3bc518968..000000000000
--- a/src/arm/kirkwood-openblocks_a7.dts
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Device Tree file for OpenBlocks A7 board
- *
- * Copyright (C) 2013 Free Electrons
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Plat'Home OpenBlocksA7";
-	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1 GB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <1>;
-			status = "okay";
-		};
-
-		i2c@11100 {
-			status = "okay";
-
-			s24c02: s24c02@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-		};
-
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
-			pinctrl-names = "default";
-
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11", "mpp15",
-					"mpp16";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14", "mpp8",
-					"mpp9";
-				marvell,function = "uart1";
-			};
-
-			pmx_sysrst: pmx-sysrst {
-				marvell,pins = "mpp6";
-				marvell,function = "sysrst";
-			};
-
-			pmx_dip_switches: pmx-dip-switches {
-				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
-				marvell,function = "gpio";
-			};
-
-			/*
-			 * Accessible on connector J202. The MPP
-			 * listed below are pin 1-7, pin 8 is unused,
-			 * pin 9 is external reset input and pin 10 is
-			 * ground.
-			 */
-			pmx_gpio_header: pmx-gpio-header {
-				marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
-					       "mpp35", "mpp34", "mpp40";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_init: pmx-init {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_usb_oc: pmx-usb-oc {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_leds: pmx-leds {
-				marvell,pins = "mpp41", "mpp42", "mpp43";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_leds>;
-		pinctrl-names = "default";
-
-		led-red {
-			label = "obsa7:red:stat";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		led-green {
-			label = "obsa7:green:stat";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		led-yellow {
-			label = "obsa7:yellow:stat";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-        };
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_gpio_init>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Init Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x1c0000>;
-	};
-
-	partition@1c0000 {
-		label = "env";
-		reg = <0x1c0000 0x2c0000>;
-	};
-
-	partition@480000 {
-		label = "test";
-		reg = <0x480000 0x160000>;
-	};
-
-	partition@5e0000 {
-		label = "conf";
-		reg = <0x5e0000 0x540000>;
-	};
-
-	partition@b20000 {
-		label = "linux";
-		reg = <0xb20000 0x3d40000>;
-	};
-
-	partition@4860000 {
-		label = "user";
-		reg = <0x4860000 0xb7a0000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-openrd-base.dts b/src/arm/kirkwood-openrd-base.dts
deleted file mode 100644
index 8af58999606d..000000000000
--- a/src/arm/kirkwood-openrd-base.dts
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Marvell OpenRD Base Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are specific to OpenRD
- * base variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
-	model = "OpenRD Base";
-	compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		serial@12100 {
-			status = "okay";
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-openrd-client.dts b/src/arm/kirkwood-openrd-client.dts
deleted file mode 100644
index 887b9c1fee43..000000000000
--- a/src/arm/kirkwood-openrd-client.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * Marvell OpenRD Client Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are specific to OpenRD
- * client variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
-	model = "OpenRD Client";
-	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			cs42l51: cs42l51@4a {
-				compatible = "cirrus,cs42l51";
-				reg = <0x4a>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,mclk-fs = <256>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&audio0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&cs42l51>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-	ethphy1: ethernet-phy@24 {
-		reg = <24>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
-
diff --git a/src/arm/kirkwood-openrd-ultimate.dts b/src/arm/kirkwood-openrd-ultimate.dts
deleted file mode 100644
index 9f12f8b53e24..000000000000
--- a/src/arm/kirkwood-openrd-ultimate.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Marvell OpenRD Ultimate Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are specific to OpenRD
- * ultimate variant of the Marvell Kirkwood Development Board.
- */
-
-/dts-v1/;
-
-#include "kirkwood-openrd.dtsi"
-
-/ {
-	model = "OpenRD Ultimate";
-	compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			cs42l51: cs42l51@4a {
-				compatible = "cirrus,cs42l51";
-				reg = <0x4a>;
-			};
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-openrd.dtsi b/src/arm/kirkwood-openrd.dtsi
deleted file mode 100644
index d3330dadf7ed..000000000000
--- a/src/arm/kirkwood-openrd.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Marvell OpenRD (Base|Client|Ultimate) Board Description
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
-			pinctrl-names = "default";
-
-			pmx_select28: pmx-select-uart-sd {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_select34: pmx-select-rs232-rs484 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-
-		};
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-		mvsdio@90000 {
-			status = "okay";
-			cd-gpios = <&gpio0 29 9>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-	pinctrl-0 = <&pmx_nand>;
-	pinctrl-names = "default";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@600000 {
-		label = "root";
-		reg = <0x0600000 0x1FA00000>;
-	};
-};
diff --git a/src/arm/kirkwood-rd88f6192.dts b/src/arm/kirkwood-rd88f6192.dts
deleted file mode 100644
index 35a29dee8dd8..000000000000
--- a/src/arm/kirkwood-rd88f6192.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Marvell RD88F6192 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the three
- * variants of the Marvell Kirkwood Development Board.
- */
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6192.dtsi"
-
-/ {
-	model = "Marvell RD88F6192 reference design";
-	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_usb_power>;
-			pinctrl-names = "default";
-
-                        pmx_usb_power: pmx-usb-power {
-                                marvell,pins = "mpp10";
-                                marvell,function = "gpo";
-                        };
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p128";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-			};
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                pinctrl-0 = <&pmx_usb_power>;
-                pinctrl-names = "default";
-
-                usb_power: regulator@0 {
-                        compatible = "regulator-fixed";
-                        reg = <0>;
-                        regulator-name = "USB VBUS";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                };
-	};
-};
-
-&mdio {
-        status = "okay";
-
-        ethphy0: ethernet-phy@8 {
-                reg = <8>;
-        };
-};
-
-&eth0 {
-        status = "okay";
-        ethernet0-port@0 {
-                phy-handle = <&ethphy0>;
-        };
-};
\ No newline at end of file
diff --git a/src/arm/kirkwood-rd88f6281-a0.dts b/src/arm/kirkwood-rd88f6281-a0.dts
deleted file mode 100644
index a803bbb70bc8..000000000000
--- a/src/arm/kirkwood-rd88f6281-a0.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Marvell RD88F6181 A0 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions for the board with the A0 variant of
- * the SoC. The ethernet switch does not have a "wan" port.
- */
-
-/dts-v1/;
-#include "kirkwood-rd88f6281.dtsi"
-
-/ {
-	model = "Marvell RD88f6281 Reference design, with A0 SoC";
-	compatible = "marvell,rd88f6281-a0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	dsa@0 {
-		switch@0 {
-			reg = <10 0>;    /* MDIO address 10, switch 0 in tree */
-		};
-	};
-};
\ No newline at end of file
diff --git a/src/arm/kirkwood-rd88f6281-a1.dts b/src/arm/kirkwood-rd88f6281-a1.dts
deleted file mode 100644
index baeebbf1d8c7..000000000000
--- a/src/arm/kirkwood-rd88f6281-a1.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Marvell RD88F6181 A1 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions for the board with the A1 variant of
- * the SoC. The ethernet switch has a "wan" port.
- */
-
-/dts-v1/;
-
-#include "kirkwood-rd88f6281.dtsi"
-
-/ {
-	model = "Marvell RD88f6281 Reference design, with A1 SoC";
-	compatible = "marvell,rd88f6281-a1", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	dsa@0 {
-		switch@0 {
-			reg = <0 0>;    /* MDIO address 0, switch 0 in tree */
-			port@4 {
-				reg = <4>;
-				label = "wan";
-			};
-		};
-	};
-};
\ No newline at end of file
diff --git a/src/arm/kirkwood-rd88f6281.dtsi b/src/arm/kirkwood-rd88f6281.dtsi
deleted file mode 100644
index 26cf0e0ccefd..000000000000
--- a/src/arm/kirkwood-rd88f6281.dtsi
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Marvell RD88F6181 Common Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions that are common between the two
- * variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_sdio_cd>;
-			pinctrl-names = "default";
-
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
-			pinctrl-names = "default";
-			status = "okay";
-			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-			/* No WP GPIO */
-		};
-	};
-
-	dsa@0 {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0>;
-		dsa,mii-bus = <&ethphy1>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
-       };
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x200000>;
-	};
-
-	partition@300000 {
-		label = "data";
-		reg = <0x0300000 0x500000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@ff {
-		reg = <0xff>; /* No PHY attached */
-		speed = <1000>;
-		duple = <1>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-rs212.dts b/src/arm/kirkwood-rs212.dts
deleted file mode 100644
index 3b19f1fd4cac..000000000000
--- a/src/arm/kirkwood-rs212.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology RS212";
-	compatible = "synology,rs212", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-3 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-38 {
-		status = "okay";
-	};
-
-	regulators-hdd-30-2 {
-		status = "okay";
-	};
-};
-
-&s35390a {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-rs409.dts b/src/arm/kirkwood-rs409.dts
deleted file mode 100644
index 921ca49e85a4..000000000000
--- a/src/arm/kirkwood-rs409.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology RS409";
-	compatible = "synology,rs409", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&rs5c372 {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-rs411.dts b/src/arm/kirkwood-rs411.dts
deleted file mode 100644
index 02852b0c809f..000000000000
--- a/src/arm/kirkwood-rs411.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-synology.dtsi"
-
-/ {
-	model = "Synology RS411 RS812";
-	compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio-fan-100-15-35-3 {
-		status = "okay";
-	};
-
-	gpio-leds-hdd-36 {
-		status = "okay";
-	};
-};
-
-&eth1 {
-	status = "okay";
-};
-
-&s35390a {
-	status = "okay";
-};
diff --git a/src/arm/kirkwood-sheevaplug-common.dtsi b/src/arm/kirkwood-sheevaplug-common.dtsi
deleted file mode 100644
index 7196c7f3e109..000000000000
--- a/src/arm/kirkwood-sheevaplug-common.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- *
- * Licensed under GPLv2
- */
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_red: pmx-led-red {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_blue: pmx-led-blue {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-			pmx_sdio_cd: pmx-sdio-cd {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-			pmx_sdio_wp: pmx-sdio-wp {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x0100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "root";
-		reg = <0x0500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-sheevaplug-esata.dts b/src/arm/kirkwood-sheevaplug-esata.dts
deleted file mode 100644
index e2b4ea4f9e10..000000000000
--- a/src/arm/kirkwood-sheevaplug-esata.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- *
- * Licensed under GPLv2
- */
-
-/dts-v1/;
-
-#include "kirkwood-sheevaplug-common.dtsi"
-
-/ {
-	model = "Globalscale Technologies eSATA SheevaPlug";
-	compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
-			pinctrl-names = "default";
-			status = "okay";
-			cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-			wp-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_blue>;
-		pinctrl-names = "default";
-
-		health {
-			label = "sheevaplug:blue:health";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-	};
-};
diff --git a/src/arm/kirkwood-sheevaplug.dts b/src/arm/kirkwood-sheevaplug.dts
deleted file mode 100644
index 82f6abf120fd..000000000000
--- a/src/arm/kirkwood-sheevaplug.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
- *
- * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
- *
- * Licensed under GPLv2
- */
-
-/dts-v1/;
-
-#include "kirkwood-sheevaplug-common.dtsi"
-
-/ {
-	model = "Globalscale Technologies SheevaPlug";
-	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-			broken-cd;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
-		pinctrl-names = "default";
-
-		health {
-			label = "sheevaplug:blue:health";
-			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		misc {
-			label = "sheevaplug:red:misc";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/src/arm/kirkwood-synology.dtsi b/src/arm/kirkwood-synology.dtsi
deleted file mode 100644
index 811e0971fc58..000000000000
--- a/src/arm/kirkwood-synology.dtsi
+++ /dev/null
@@ -1,863 +0,0 @@
-/*
- * Nodes for Marvell 628x Synology devices
- *
- * Andrew Lunn <andrew@lunn.ch>
- * Ben Peddell <klightspeed@killerwolves.net>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/ {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			pcie2: pcie@2,0 {
-				status = "disabled";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_alarmled_12: pmx-alarmled-12 {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_15: pmx-fanctrl-15 {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_16: pmx-fanctrl-16 {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_17: pmx-fanctrl-17 {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_18: pmx-fanalarm-18 {
-				marvell,pins = "mpp18";
-				marvell,function = "gpo";
-			};
-
-			pmx_hddled_20: pmx-hddled-20 {
-				marvell,pins = "mpp20";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_21: pmx-hddled-21 {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_22: pmx-hddled-22 {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_23: pmx-hddled-23 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_24: pmx-hddled-24 {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_25: pmx-hddled-25 {
-				marvell,pins = "mpp25";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_26: pmx-hddled-26 {
-				marvell,pins = "mpp26";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_27: pmx-hddled-27 {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_28: pmx-hddled-28 {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
-				marvell,pins = "mpp31";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_32: pmx-fanctrl-32 {
-				marvell,pins = "mpp32";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanctrl_33: pmx-fanctrl-33 {
-				marvell,pins = "mpp33";
-				marvell,function = "gpo";
-			};
-
-			pmx_fanctrl_34: pmx-fanctrl-34 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_35: pmx-fanalarm-35 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_36: pmx-hddled-36 {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_37: pmx-hddled-37 {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_38: pmx-hddled-38 {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_39: pmx-hddled-39 {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_40: pmx-hddled-40 {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_41: pmx-hddled-41 {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_42: pmx-hddled-42 {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_43: pmx-hddled-43 {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_44: pmx-hddled-44 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_hddled_45: pmx-hddled-45 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_44: pmx-fanalarm-44 {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_fanalarm_45: pmx-fanalarm-45 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-		};
-
-		rtc@10300 {
-			status = "disabled";
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p80";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@00000000 {
-					reg = <0x00000000 0x00080000>;
-					label = "RedBoot";
-				};
-
-				partition@00080000 {
-					reg = <0x00080000 0x00200000>;
-					label = "zImage";
-				};
-
-				partition@00280000 {
-					reg = <0x00280000 0x00140000>;
-					label = "rd.gz";
-				};
-
-				partition@003c0000 {
-					reg = <0x003c0000 0x00010000>;
-					label = "vendor";
-				};
-
-				partition@003d0000 {
-					reg = <0x003d0000 0x00020000>;
-					label = "RedBoot config";
-				};
-
-				partition@003f0000 {
-					reg = <0x003f0000 0x00010000>;
-					label = "FIS directory";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			rs5c372: rs5c372@32 {
-				status = "disabled";
-				compatible = "ricoh,rs5c372";
-				reg = <0x32>;
-			};
-
-			s35390a: s35390a@30 {
-				status = "disabled";
-				compatible = "ssi,s35390a";
-				reg = <0x30>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		serial@12100 {
-			status = "okay";
-		};
-
-		poweroff@12100 {
-			compatible = "synology,power-off";
-			reg = <0x12100 0x100>;
-			clocks = <&gate_clk 7>;
-		};
-
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-
-	gpio-fan-150-32-35 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
-		             &pmx_fanalarm_35>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
-			 &gpio1 1 GPIO_ACTIVE_HIGH
-			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
-	};
-
-	gpio-fan-150-15-18 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_18>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2200 1
-				       2500 2
-				       3000 4
-				       3300 3
-				       3700 5
-				       3800 6
-				       4200 7 >;
-	};
-
-	gpio-fan-100-32-35 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
-		             &pmx_fanalarm_35>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
-			 &gpio1 1 GPIO_ACTIVE_HIGH
-			 &gpio1 2 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-fan-100-15-18 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_18>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-fan-100-15-35-1 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_35>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-fan-100-15-35-3 {
-		status = "disabled";
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
-		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
-		pinctrl-names = "default";
-		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
-			 &gpio0 16 GPIO_ACTIVE_HIGH
-			 &gpio0 17 GPIO_ACTIVE_HIGH>;
-		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
-			       &gpio1 12 GPIO_ACTIVE_HIGH
-			       &gpio1 13 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <    0 0
-				       2500 1
-				       3100 2
-				       3800 3
-				       4600 4
-				       4800 5
-				       4900 6
-				       5000 7 >;
-	};
-
-	gpio-leds-alarm-12 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_alarmled_12>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:alarm";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-20 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
-			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
-			     &pmx_hddled_26 &pmx_hddled_27>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-green {
-			label = "synology:green:hdd3";
-			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-amber {
-			label = "synology:amber:hdd3";
-			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-green {
-			label = "synology:green:hdd4";
-			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-amber {
-			label = "synology:amber:hdd4";
-			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-21-1 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-21-2 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-36 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
-			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
-			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
-			     &pmx_hddled_45>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-green {
-			label = "synology:green:hdd3";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd3-amber {
-			label = "synology:amber:hdd3";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-green {
-			label = "synology:green:hdd4";
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd4-amber {
-			label = "synology:amber:hdd4";
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd5-green {
-			label = "synology:green:hdd5";
-			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd5-amber {
-			label = "synology:amber:hdd5";
-			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-leds-hdd-38 {
-		status = "disabled";
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
-		pinctrl-names = "default";
-
-		hdd1-green {
-			label = "synology:green:hdd1";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd1-amber {
-			label = "synology:amber:hdd1";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-green {
-			label = "synology:green:hdd2";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-
-		hdd2-amber {
-			label = "synology:amber:hdd2";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	regulators-hdd-29 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-30-1 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_30>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-30-2 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-30-4 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
-			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd1power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "hdd3power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "hdd4power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-31 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd2_pwr_31>;
-		pinctrl-names = "default";
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators-hdd-34 {
-		status = "disabled";
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
-			     &pmx_hdd4_pwr_45>;
-		pinctrl-names = "default";
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdd2power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "hdd3power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "hdd4power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			startup-delay-us = <5000000>;
-			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-		reg = <9>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
-&eth1 {
-	status = "disabled";
-
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood-t5325.dts b/src/arm/kirkwood-t5325.dts
deleted file mode 100644
index 610ec0f95858..000000000000
--- a/src/arm/kirkwood-t5325.dts
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Device Tree file for HP t5325 Thin Client"
- *
- * Copyright (C) 2014
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "HP t5325 Thin Client";
-	compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
-			pinctrl-names = "default";
-
-			pmx_button_power: pmx-button_power {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_power_off: pmx-power-off {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-
-			pmx_led: pmx-led {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
-				marvell,function = "spi";
-			};
-
-			pmx_sysrst: pmx-sysrst {
-				marvell,pins = "mpp6";
-				marvell,function = "sysrst";
-			};
-
-			pmx_i2s: pmx-i2s {
-				marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
-					       "mpp43";
-				marvell,function = "audio";
-			};
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p80";
-				spi-max-frequency = <86000000>;
-				reg = <0>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x80000>;
-					label = "u-boot";
-				};
-
-				partition@1 {
-					reg = <0x80000 0x40000>;
-					label = "SSD firmware";
-				};
-
-				partition@2 {
-					reg = <0xc0000 0x10000>;
-					label = "u-boot env";
-				};
-
-				partition@3 {
-					reg = <0xd0000 0x10000>;
-					label = "permanent u-boot env";
-				};
-
-				partition@4 {
-					reg = <0xd0000 0x10000>;
-					label = "permanent u-boot env";
-				};
-			};
-		};
-
-		i2c@11000 {
-			status = "okay";
-
-			alc5621: alc5621@1a {
-				compatible = "realtek,alc5621";
-				reg = <0x1a>;
-				#sound-dai-cells = <0>;
-				add-ctrl = <0x3700>;
-				jack-det-ctrl = <0x4810>;
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-		audio: audio-controller@a0000 {
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_sata_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB-SATA Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_power>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio_poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pmx_power_off>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Speaker", "SPKOUT",
-			"Speaker", "SPKOUTN",
-			"MIC1", "Mic Jack",
-			"MIC2", "Mic Jack";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker",
-			"Microphone", "Mic Jack";
-
-		simple-audio-card,mclk-fs = <256>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&audio>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&alc5621>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-topkick.dts b/src/arm/kirkwood-topkick.dts
deleted file mode 100644
index f5c8c0dd41dc..000000000000
--- a/src/arm/kirkwood-topkick.dts
+++ /dev/null
@@ -1,215 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Univeral Scientific Industrial Co. Topkick-1281P2";
-	compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			/*
-			 * Switch positions
-			 *
-			 *     /-SW_LEFT(2)
-			 *     |
-			 *     |   /-SW_IDLE
-			 *     |   |
-			 *     |   |   /-SW_RIGHT
-			 *     |   |   |
-			 * PS [L] [I] [R] LEDS
-			 */
-			pinctrl-0 = <&pmx_sw_left &pmx_sw_right
-				     &pmx_sw_idle &pmx_sw_left2>;
-			pinctrl-names = "default";
-
-			pmx_led_disk_yellow: pmx-led-disk-yellow {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_sata0_pwr_enable: pmx-sata0-pwr-enable {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_red: pmx-led-sys-red {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_sys_blue: pmx-led-sys-blue {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_wifi_green: pmx-led-wifi-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_left: pmx-sw-left {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_right: pmx-sw-right {
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_idle: pmx-sw-idle {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-			pmx_sw_left2: pmx-sw-left2 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_wifi_yellow: pmx-led-wifi-yellow {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <1>;
-		};
-
-		i2c@11000 {
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-			broken-cd;
-		};
-	};
-
-	gpio-leds {
-		/*
-		 * GPIO LED layout
-		 *
-		 *       /-SYS_LED(2)
-		 *       |
-		 *       |   /-DISK_LED
-		 *       |   |
-		 *       |   |   /-WLAN_LED(2)
-		 *       |   |   |
-		 * [SW] [*] [*] [*]
-		 */
-
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red
-			     &pmx_led_sys_blue &pmx_led_wifi_green
-			     &pmx_led_wifi_yellow>;
-		pinctrl-names = "default";
-
-		disk {
-			label = "topkick:yellow:disk";
-			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
-		};
-		system2 {
-			label = "topkick:red:system";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		system {
-			label = "topkick:blue:system";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		wifi {
-			label = "topkick:green:wifi";
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
-		};
-		wifi2 {
-			label = "topkick:yellow:wifi";
-			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_sata0_pwr_enable>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 4 0>;
-		};
-	};
-};
-
-&nand {
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x180000>;
-	};
-
-	partition@180000 {
-		label = "u-boot env";
-		reg = <0x0180000 0x20000>;
-	};
-
-	partition@200000 {
-		label = "uImage";
-		reg = <0x0200000 0x600000>;
-	};
-
-	partition@800000 {
-		label = "uInitrd";
-		reg = <0x0800000 0x1000000>;
-	};
-
-	partition@1800000 {
-		label = "rootfs";
-		reg = <0x1800000 0xe800000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-ts219-6281.dts b/src/arm/kirkwood-ts219-6281.dts
deleted file mode 100644
index 9767d73f3857..000000000000
--- a/src/arm/kirkwood-ts219-6281.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-ts219.dtsi"
-
-/ {
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
-			pinctrl-names = "default";
-
-			pmx_ram_size: pmx-ram-size {
-				/* RAM: 0: 256 MB, 1: 512 MB */
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_USB_copy_button: pmx-USB-copy-button {
-				marvell,pins = "mpp15";
-				marvell,function = "gpio";
-			};
-			pmx_reset_button: pmx-reset-button {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-			pmx_board_id: pmx-board-id {
-				/* 0: TS-11x, 1: TS-21x */
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-ts219-6282.dts b/src/arm/kirkwood-ts219-6282.dts
deleted file mode 100644
index bfc1a32d4e42..000000000000
--- a/src/arm/kirkwood-ts219-6282.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-ts219.dtsi"
-
-/ {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-
-			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
-			pinctrl-names = "default";
-
-			pmx_ram_size: pmx-ram-size {
-				/* RAM: 0: 256 MB, 1: 512 MB */
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_reset_button: pmx-reset-button {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_USB_copy_button: pmx-USB-copy-button {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_board_id: pmx-board-id {
-				/* 0: TS-11x, 1: TS-21x */
-				marvell,pins = "mpp44";
-				marvell,function = "gpio";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
diff --git a/src/arm/kirkwood-ts219.dtsi b/src/arm/kirkwood-ts219.dtsi
deleted file mode 100644
index df7f15276575..000000000000
--- a/src/arm/kirkwood-ts219.dtsi
+++ /dev/null
@@ -1,107 +0,0 @@
-/ {
-	model = "QNAP TS219 family";
-	compatible = "qnap,ts219", "marvell,kirkwood";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		i2c@11000 {
-			status = "okay";
-			clock-frequency = <400000>;
-
-			s35390a: s35390a@30 {
-				compatible = "s35390a";
-				reg = <0x30>;
-			};
-		};
-		serial@12000 {
-			status = "okay";
-		};
-		serial@12100 {
-			status = "okay";
-		};
-		poweroff@12100 {
-			compatible = "qnap,power-off";
-			reg = <0x12000 0x100>;
-			clocks = <&gate_clk 7>;
-		};
-		spi@10600 {
-			status = "okay";
-
-			m25p128@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p128";
-				reg = <0>;
-				spi-max-frequency = <20000000>;
-				mode = <0>;
-
-				partition@0000000 {
-					reg = <0x00000000 0x00080000>;
-					label = "U-Boot";
-				};
-
-				partition@00200000 {
-					reg = <0x00200000 0x00200000>;
-					label = "Kernel";
-				};
-
-				partition@00400000 {
-					reg = <0x00400000 0x00900000>;
-					label = "RootFS1";
-				};
-				partition@00d00000 {
-					reg = <0x00d00000 0x00300000>;
-					label = "RootFS2";
-				};
-				partition@00040000 {
-					reg = <0x00080000 0x00040000>;
-					label = "U-Boot Config";
-				};
-				partition@000c0000 {
-					reg = <0x000c0000 0x00140000>;
-					label = "NAS Config";
-				};
-			};
-		};
-		sata@80000 {
-			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-			pinctrl-names = "default";
-			status = "okay";
-			nr-ports = <2>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy {
-                /* overwrite reg property in board file */
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/src/arm/kirkwood-ts419-6281.dts b/src/arm/kirkwood-ts419-6281.dts
deleted file mode 100644
index aa22aa862857..000000000000
--- a/src/arm/kirkwood-ts419-6281.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Device Tree file for QNAP TS41X with 6281 SoC
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-#include "kirkwood-ts219.dtsi"
-#include "kirkwood-ts419.dtsi"
-
-&ethphy0 { reg = <8>; };
-&ethphy1 { reg = <0>; };
diff --git a/src/arm/kirkwood-ts419-6282.dts b/src/arm/kirkwood-ts419-6282.dts
deleted file mode 100644
index d7512d4cdced..000000000000
--- a/src/arm/kirkwood-ts419-6282.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Device Tree file for QNAP TS41X with 6282 SoC
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-#include "kirkwood-ts219.dtsi"
-#include "kirkwood-ts419.dtsi"
-
-/ {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
-};
-
-&ethphy0 { reg = <0>; };
-&ethphy1 { reg = <1>; };
diff --git a/src/arm/kirkwood-ts419.dtsi b/src/arm/kirkwood-ts419.dtsi
deleted file mode 100644
index 30ab93bfb1e4..000000000000
--- a/src/arm/kirkwood-ts419.dtsi
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Device Tree include file for QNAP TS41X
- *
- * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/ {
-	model = "QNAP TS419 family";
-	compatible = "qnap,ts419", "marvell,kirkwood";
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pinctrl-names = "default";
-
-			pmx_USB_copy_button: pmx-USB-copy-button {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_reset_button: pmx-reset-button {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			/*
-			 * JP1 indicates if an LCD module is installed
-			 * on the serial port (0), or if the port is used
-			 * as a console (1).
-			 */
-			pmx_jumper_jp1: pmx-jumper_jp1 {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "USB Copy";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-                /* overwrite reg property in board file */
-	};
-};
-
-&eth1 {
-	status = "okay";
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/src/arm/kirkwood.dtsi b/src/arm/kirkwood.dtsi
deleted file mode 100644
index afc640cd80c5..000000000000
--- a/src/arm/kirkwood.dtsi
+++ /dev/null
@@ -1,383 +0,0 @@
-/include/ "skeleton.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	compatible = "marvell,kirkwood";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,feroceon";
-			reg = <0>;
-			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
-			clock-names = "cpu_clk", "ddrclk", "powersave";
-		};
-	};
-
-	aliases {
-	       gpio0 = &gpio0;
-	       gpio1 = &gpio1;
-	       i2c0 = &i2c0;
-	};
-
-	mbus {
-		compatible = "marvell,kirkwood-mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		/* If a board file needs to change this ranges it must replace it completely */
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
-			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
-			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
-			  >;
-		controller = <&mbusc>;
-		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
-		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
-
-		cesa: crypto@0301 {
-			compatible = "marvell,orion-crypto";
-			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
-			      <MBUS_ID(0x03, 0x01) 0 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <22>;
-			clocks = <&gate_clk 17>;
-			status = "okay";
-		};
-
-		nand: nand@012f {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cle = <0>;
-			ale = <1>;
-			bank-width = <1>;
-			compatible = "marvell,orion-nand";
-			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
-			chip-delay = <25>;
-			/* set partition map and/or chip-delay in board dts */
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-	};
-
-	ocp@f1000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf1000000 0x0100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		pinctrl: pin-controller@10000 {
-			/* set compatible property in SoC file */
-			reg = <0x10000 0x20>;
-
-			pmx_ge1: pmx-ge1 {
-				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
-					       "mpp24", "mpp25", "mpp26", "mpp27",
-					       "mpp30", "mpp31", "mpp32", "mpp33";
-				marvell,function = "ge1";
-			};
-
-			pmx_nand: pmx-nand {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
-					       "mpp4", "mpp5", "mpp18", "mpp19";
-				marvell,function = "nand";
-			};
-
-			/*
-			 * Default SPI0 pinctrl setting with CSn on mpp0,
-			 * overwrite marvell,pins on board level if required.
-			 */
-			pmx_spi: pmx-spi {
-				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
-				marvell,function = "spi";
-			};
-
-			pmx_twsi0: pmx-twsi0 {
-				marvell,pins = "mpp8", "mpp9";
-				marvell,function = "twsi0";
-			};
-
-			/*
-			 * Default UART pinctrl setting without RTS/CTS,
-			 * overwrite marvell,pins on board level if required.
-			 */
-			pmx_uart0: pmx-uart0 {
-				marvell,pins = "mpp10", "mpp11";
-				marvell,function = "uart0";
-			};
-
-			pmx_uart1: pmx-uart1 {
-				marvell,pins = "mpp13", "mpp14";
-				marvell,function = "uart1";
-			};
-		};
-
-		core_clk: core-clocks@10030 {
-			compatible = "marvell,kirkwood-core-clock";
-			reg = <0x10030 0x4>;
-			#clock-cells = <1>;
-		};
-
-		spi0: spi@10600 {
-			compatible = "marvell,orion-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <23>;
-			reg = <0x10600 0x28>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_spi>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		gpio0: gpio@10100 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0x10100 0x40>;
-			ngpios = <32>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <35>, <36>, <37>, <38>;
-			clocks = <&gate_clk 7>;
-		};
-
-		gpio1: gpio@10140 {
-			compatible = "marvell,orion-gpio";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0x10140 0x40>;
-			ngpios = <18>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <39>, <40>, <41>;
-			clocks = <&gate_clk 7>;
-		};
-
-		i2c0: i2c@11000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <29>;
-			clock-frequency = <100000>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_twsi0>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		uart0: serial@12000 {
-			compatible = "ns16550a";
-			reg = <0x12000 0x100>;
-			reg-shift = <2>;
-			interrupts = <33>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		uart1: serial@12100 {
-			compatible = "ns16550a";
-			reg = <0x12100 0x100>;
-			reg-shift = <2>;
-			interrupts = <34>;
-			clocks = <&gate_clk 7>;
-			pinctrl-0 = <&pmx_uart1>;
-			pinctrl-names = "default";
-			status = "disabled";
-		};
-
-		mbusc: mbus-controller@20000 {
-			compatible = "marvell,mbus-controller";
-			reg = <0x20000 0x80>, <0x1500 0x20>;
-		};
-
-		sysc: system-controller@20000 {
-			compatible = "marvell,orion-system-controller";
-			reg = <0x20000 0x120>;
-		};
-
-		bridge_intc: bridge-interrupt-ctrl@20110 {
-			compatible = "marvell,orion-bridge-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20110 0x8>;
-			interrupts = <1>;
-			marvell,#interrupts = <6>;
-		};
-
-		gate_clk: clock-gating-control@2011c {
-			compatible = "marvell,kirkwood-gating-clock";
-			reg = <0x2011c 0x4>;
-			clocks = <&core_clk 0>;
-			#clock-cells = <1>;
-		};
-
-		l2: l2-cache@20128 {
-			compatible = "marvell,kirkwood-cache";
-			reg = <0x20128 0x4>;
-		};
-
-		intc: main-interrupt-ctrl@20200 {
-			compatible = "marvell,orion-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20200 0x10>, <0x20210 0x10>;
-		};
-
-		timer: timer@20300 {
-			compatible = "marvell,orion-timer";
-			reg = <0x20300 0x20>;
-			interrupt-parent = <&bridge_intc>;
-			interrupts = <1>, <2>;
-			clocks = <&core_clk 0>;
-		};
-
-		wdt: watchdog-timer@20300 {
-			compatible = "marvell,orion-wdt";
-			reg = <0x20300 0x28>, <0x20108 0x4>;
-			interrupt-parent = <&bridge_intc>;
-			interrupts = <3>;
-			clocks = <&gate_clk 7>;
-			status = "okay";
-		};
-
-		usb0: ehci@50000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x50000 0x1000>;
-			interrupts = <19>;
-			clocks = <&gate_clk 3>;
-			status = "okay";
-		};
-
-		dma0: xor@60800 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60800 0x100
-			       0x60A00 0x100>;
-			status = "okay";
-			clocks = <&gate_clk 8>;
-
-			xor00 {
-			      interrupts = <5>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			};
-			xor01 {
-			      interrupts = <6>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
-			};
-		};
-
-		dma1: xor@60900 {
-			compatible = "marvell,orion-xor";
-			reg = <0x60900 0x100
-			       0x60B00 0x100>;
-			status = "okay";
-			clocks = <&gate_clk 16>;
-
-			xor00 {
-			      interrupts = <7>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			};
-			xor01 {
-			      interrupts = <8>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
-			};
-		};
-
-		eth0: ethernet-controller@72000 {
-			compatible = "marvell,kirkwood-eth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72000 0x4000>;
-			clocks = <&gate_clk 0>;
-			marvell,tx-checksum-limit = <1600>;
-			status = "disabled";
-
-			ethernet0-port@0 {
-				compatible = "marvell,kirkwood-eth-port";
-				reg = <0>;
-				interrupts = <11>;
-				/* overwrite MAC address in bootloader */
-				local-mac-address = [00 00 00 00 00 00];
-				/* set phy-handle property in board file */
-			};
-		};
-
-		mdio: mdio-bus@72004 {
-			compatible = "marvell,orion-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72004 0x84>;
-			interrupts = <46>;
-			clocks = <&gate_clk 0>;
-			status = "disabled";
-
-			/* add phy nodes in board file */
-		};
-
-		eth1: ethernet-controller@76000 {
-			compatible = "marvell,kirkwood-eth";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x76000 0x4000>;
-			clocks = <&gate_clk 19>;
-			marvell,tx-checksum-limit = <1600>;
-			pinctrl-0 = <&pmx_ge1>;
-			pinctrl-names = "default";
-			status = "disabled";
-
-			ethernet1-port@0 {
-				compatible = "marvell,kirkwood-eth-port";
-				reg = <0>;
-				interrupts = <15>;
-				/* overwrite MAC address in bootloader */
-				local-mac-address = [00 00 00 00 00 00];
-				/* set phy-handle property in board file */
-			};
-		};
-
-		sata_phy0: sata-phy@82000 {
-			compatible = "marvell,mvebu-sata-phy";
-			reg = <0x82000 0x0334>;
-			clocks = <&gate_clk 14>;
-			clock-names = "sata";
-			#phy-cells = <0>;
-			status = "ok";
-		};
-
-		sata_phy1: sata-phy@84000 {
-			compatible = "marvell,mvebu-sata-phy";
-			reg = <0x84000 0x0334>;
-			clocks = <&gate_clk 15>;
-			clock-names = "sata";
-			#phy-cells = <0>;
-			status = "ok";
-		};
-
-		audio0: audio-controller@a0000 {
-			compatible = "marvell,kirkwood-audio";
-			#sound-dai-cells = <0>;
-			reg = <0xa0000 0x2210>;
-			interrupts = <24>;
-			clocks = <&gate_clk 9>;
-			clock-names = "internal";
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/lpc32xx.dtsi b/src/arm/lpc32xx.dtsi
deleted file mode 100644
index 3abebb75fc57..000000000000
--- a/src/arm/lpc32xx.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * NXP LPC32xx SoC
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "nxp,lpc3220";
-	interrupt-parent = <&mic>;
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x20000000 0x20000000 0x30000000>;
-
-		/*
-		 * Enable either SLC or MLC
-		 */
-		slc: flash@20020000 {
-			compatible = "nxp,lpc3220-slc";
-			reg = <0x20020000 0x1000>;
-			status = "disabled";
-		};
-
-		mlc: flash@200a8000 {
-			compatible = "nxp,lpc3220-mlc";
-			reg = <0x200a8000 0x11000>;
-			interrupts = <11 0>;
-			status = "disabled";
-		};
-
-		dma@31000000 {
-			compatible = "arm,pl080", "arm,primecell";
-			reg = <0x31000000 0x1000>;
-			interrupts = <0x1c 0>;
-		};
-
-		/*
-		 * Enable either ohci or usbd (gadget)!
-		 */
-		ohci@31020000 {
-			compatible = "nxp,ohci-nxp", "usb-ohci";
-			reg = <0x31020000 0x300>;
-			interrupts = <0x3b 0>;
-			status = "disabled";
-		};
-
-		usbd@31020000 {
-			compatible = "nxp,lpc3220-udc";
-			reg = <0x31020000 0x300>;
-			interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
-			status = "disabled";
-		};
-
-		clcd@31040000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0x31040000 0x1000>;
-			interrupts = <0x0e 0>;
-			status = "disabled";
-		};
-
-		mac: ethernet@31060000 {
-			compatible = "nxp,lpc-eth";
-			reg = <0x31060000 0x1000>;
-			interrupts = <0x1d 0>;
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x20000000 0x20000000 0x30000000>;
-
-			ssp0: ssp@20084000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0x20084000 0x1000>;
-				interrupts = <0x14 0>;
-			};
-
-			spi1: spi@20088000 {
-				compatible = "nxp,lpc3220-spi";
-				reg = <0x20088000 0x1000>;
-			};
-
-			ssp1: ssp@2008c000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0x2008c000 0x1000>;
-				interrupts = <0x15 0>;
-			};
-
-			spi2: spi@20090000 {
-				compatible = "nxp,lpc3220-spi";
-				reg = <0x20090000 0x1000>;
-			};
-
-			i2s0: i2s@20094000 {
-				compatible = "nxp,lpc3220-i2s";
-				reg = <0x20094000 0x1000>;
-			};
-
-			sd@20098000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				reg = <0x20098000 0x1000>;
-				interrupts = <0x0f 0>, <0x0d 0>;
-				status = "disabled";
-			};
-
-			i2s1: i2s@2009C000 {
-				compatible = "nxp,lpc3220-i2s";
-				reg = <0x2009C000 0x1000>;
-			};
-
-			/* UART5 first since it is the default console, ttyS0 */
-			uart5: serial@40090000 {
-				/* actually, ns16550a w/ 64 byte fifos! */
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40090000 0x1000>;
-				interrupts = <9 0>;
-				clock-frequency = <13000000>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart3: serial@40080000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40080000 0x1000>;
-				interrupts = <7 0>;
-				clock-frequency = <13000000>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart4: serial@40088000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40088000 0x1000>;
-				interrupts = <8 0>;
-				clock-frequency = <13000000>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			uart6: serial@40098000 {
-				compatible = "nxp,lpc3220-uart";
-				reg = <0x40098000 0x1000>;
-				interrupts = <10 0>;
-				clock-frequency = <13000000>;
-				reg-shift = <2>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@400A0000 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x400A0000 0x100>;
-				interrupts = <0x33 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pnx,timeout = <0x64>;
-			};
-
-			i2c2: i2c@400A8000 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x400A8000 0x100>;
-				interrupts = <0x32 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pnx,timeout = <0x64>;
-			};
-
-			mpwm: mpwm@400E8000 {
-				compatible = "nxp,lpc3220-motor-pwm";
-				reg = <0x400E8000 0x78>;
-				status = "disabled";
-				#pwm-cells = <2>;
-			};
-
-			i2cusb: i2c@31020300 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x31020300 0x100>;
-				interrupts = <0x3f 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pnx,timeout = <0x64>;
-			};
-		};
-
-		fab {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x20000000 0x20000000 0x30000000>;
-
-			/*
-			 * MIC Interrupt controller includes:
-			 *   MIC @40008000
-			 *   SIC1 @4000C000
-			 *   SIC2 @40010000
-			 */
-			mic: interrupt-controller@40008000 {
-				compatible = "nxp,lpc3220-mic";
-				interrupt-controller;
-				reg = <0x40008000 0xC000>;
-				#interrupt-cells = <2>;
-			};
-
-			uart1: serial@40014000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x40014000 0x1000>;
-				interrupts = <26 0>;
-				status = "disabled";
-			};
-
-			uart2: serial@40018000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x40018000 0x1000>;
-				interrupts = <25 0>;
-				status = "disabled";
-			};
-
-			uart7: serial@4001c000 {
-				compatible = "nxp,lpc3220-hsuart";
-				reg = <0x4001c000 0x1000>;
-				interrupts = <24 0>;
-				status = "disabled";
-			};
-
-			rtc@40024000 {
-				compatible = "nxp,lpc3220-rtc";
-				reg = <0x40024000 0x1000>;
-				interrupts = <0x34 0>;
-			};
-
-			gpio: gpio@40028000 {
-				compatible = "nxp,lpc3220-gpio";
-				reg = <0x40028000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <3>; /* bank, pin, flags */
-			};
-
-			watchdog@4003C000 {
-				compatible = "nxp,pnx4008-wdt";
-				reg = <0x4003C000 0x1000>;
-			};
-
-			/*
-			 * TSC vs. ADC: Since those two share the same
-			 * hardware, you need to choose from one of the
-			 * following two and do 'status = "okay";' for one of
-			 * them
-			 */
-
-			adc@40048000 {
-				compatible = "nxp,lpc3220-adc";
-				reg = <0x40048000 0x1000>;
-				interrupts = <0x27 0>;
-				status = "disabled";
-			};
-
-			tsc@40048000 {
-				compatible = "nxp,lpc3220-tsc";
-				reg = <0x40048000 0x1000>;
-				interrupts = <0x27 0>;
-				status = "disabled";
-			};
-
-			key@40050000 {
-				compatible = "nxp,lpc3220-key";
-				reg = <0x40050000 0x1000>;
-				interrupts = <54 0>;
-				status = "disabled";
-			};
-
-			pwm: pwm@4005C000 {
-				compatible = "nxp,lpc3220-pwm";
-				reg = <0x4005C000 0x8>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/marco-evb.dts b/src/arm/marco-evb.dts
deleted file mode 100644
index 5130aeacfca5..000000000000
--- a/src/arm/marco-evb.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * DTS file for CSR SiRFmarco Evaluation Board
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "marco.dtsi"
-
-/ {
-	model = "CSR SiRFmarco Evaluation Board";
-	compatible = "sirf,marco-cb", "sirf,marco";
-
-	memory {
-		reg = <0x40000000 0x60000000>;
-	};
-
-	axi {
-		peri-iobg {
-			uart1: uart@cc060000 {
-				status = "okay";
-			};
-			uart2: uart@cc070000 {
-				status = "okay";
-			};
-			i2c0: i2c@cc0e0000 {
-			      status = "okay";
-			      fpga-cpld@4d {
-				      compatible = "sirf,fpga-cpld";
-				      reg = <0x4d>;
-			      };
-			};
-			spi1: spi@cc170000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins_a>;
-				spi@0 {
-					compatible = "spidev";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-			pci-iobg {
-				sd0: sdhci@cd000000 {
-					bus-width = <8>;
-					status = "okay";
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/marco.dtsi b/src/arm/marco.dtsi
deleted file mode 100644
index fb354225740a..000000000000
--- a/src/arm/marco.dtsi
+++ /dev/null
@@ -1,757 +0,0 @@
-/*
- * DTS file for CSR SiRFmarco SoC
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
-	compatible = "sirf,marco";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0xa0000000>;
-
-		l2-cache-controller@c0030000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xc0030000 0x1000>;
-			interrupts = <0 59 0>;
-			arm,tag-latency = <1 1 1>;
-			arm,data-latency = <1 1 1>;
-			arm,filter-ranges = <0x40000000 0x80000000>;
-		};
-
-		gic: interrupt-controller@c0011000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xc0011000 0x1000>,
-			      <0xc0010100 0x0100>;
-		};
-
-		rstc-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc2000000 0xc2000000 0x1000000>;
-
-			rstc: reset-controller@c2000000 {
-				compatible = "sirf,marco-rstc";
-				reg = <0xc2000000 0x10000>;
-				#reset-cells = <1>;
-			};
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc3000000 0xc3000000 0x1000000>;
-
-			clock-controller@c3000000 {
-				compatible = "sirf,marco-clkc";
-				reg = <0xc3000000 0x1000>;
-				interrupts = <0 3 0>;
-			};
-
-			rsc-controller@c3010000 {
-				compatible = "sirf,marco-rsc";
-				reg = <0xc3010000 0x1000>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc4000000 0xc4000000 0x1000000>;
-
-			memory-controller@c4000000 {
-				compatible = "sirf,marco-memc";
-				reg = <0xc4000000 0x10000>;
-				interrupts = <0 27 0>;
-			};
-		};
-
-		disp-iobg0 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc5000000 0xc5000000 0x1000000>;
-
-			display0@c5000000 {
-				compatible = "sirf,marco-lcd";
-				reg = <0xc5000000 0x10000>;
-				interrupts = <0 30 0>;
-			};
-
-			vpp0@c5010000 {
-				compatible = "sirf,marco-vpp";
-				reg = <0xc5010000 0x10000>;
-				interrupts = <0 31 0>;
-			};
-		};
-
-		disp-iobg1 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc6000000 0xc6000000 0x1000000>;
-
-			display1@c6000000 {
-				compatible = "sirf,marco-lcd";
-				reg = <0xc6000000 0x10000>;
-				interrupts = <0 62 0>;
-			};
-
-			vpp1@c6010000 {
-				compatible = "sirf,marco-vpp";
-				reg = <0xc6010000 0x10000>;
-				interrupts = <0 63 0>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc8000000 0xc8000000 0x1000000>;
-
-			graphics@c8000000 {
-				compatible = "powervr,sgx540";
-				reg = <0xc8000000 0x1000000>;
-				interrupts = <0 6 0>;
-			};
-		};
-
-		multimedia-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xc9000000 0xc9000000 0x1000000>;
-
-			multimedia@a0000000 {
-				compatible = "sirf,marco-video-codec";
-				reg = <0xc9000000 0x1000000>;
-				interrupts = <0 5 0>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xca000000 0xca000000 0x2000000>;
-
-			dspif@ca000000 {
-				compatible = "sirf,marco-dspif";
-				reg = <0xca000000 0x10000>;
-				interrupts = <0 9 0>;
-			};
-
-			gps@ca010000 {
-				compatible = "sirf,marco-gps";
-				reg = <0xca010000 0x10000>;
-				interrupts = <0 7 0>;
-			};
-
-			dsp@cb000000 {
-				compatible = "sirf,marco-dsp";
-				reg = <0xcb000000 0x1000000>;
-				interrupts = <0 8 0>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xcc000000 0xcc000000 0x2000000>;
-
-			timer@cc020000 {
-				compatible = "sirf,marco-tick";
-				reg = <0xcc020000 0x1000>;
-				interrupts = <0 0 0>,
-					   <0 1 0>,
-					   <0 2 0>,
-					   <0 49 0>,
-					   <0 50 0>,
-					   <0 51 0>;
-			};
-
-			nand@cc030000 {
-				compatible = "sirf,marco-nand";
-				reg = <0xcc030000 0x10000>;
-				interrupts = <0 41 0>;
-			};
-
-			audio@cc040000 {
-				compatible = "sirf,marco-audio";
-				reg = <0xcc040000 0x10000>;
-				interrupts = <0 35 0>;
-			};
-
-			uart0: uart@cc050000 {
-				cell-index = <0>;
-				compatible = "sirf,marco-uart";
-				reg = <0xcc050000 0x1000>;
-				interrupts = <0 17 0>;
-				fifosize = <128>;
-				status = "disabled";
-			};
-
-			uart1: uart@cc060000 {
-				cell-index = <1>;
-				compatible = "sirf,marco-uart";
-				reg = <0xcc060000 0x1000>;
-				interrupts = <0 18 0>;
-				fifosize = <32>;
-				status = "disabled";
-			};
-
-			uart2: uart@cc070000 {
-				cell-index = <2>;
-				compatible = "sirf,marco-uart";
-				reg = <0xcc070000 0x1000>;
-				interrupts = <0 19 0>;
-				fifosize = <128>;
-				status = "disabled";
-			};
-
-			uart3: uart@cc190000 {
-				cell-index = <3>;
-				compatible = "sirf,marco-uart";
-				reg = <0xcc190000 0x1000>;
-				interrupts = <0 66 0>;
-				fifosize = <128>;
-				status = "disabled";
-			};
-
-			uart4: uart@cc1a0000 {
-				cell-index = <4>;
-				compatible = "sirf,marco-uart";
-				reg = <0xcc1a0000 0x1000>;
-				interrupts = <0 69 0>;
-				fifosize = <128>;
-				status = "disabled";
-			};
-
-			usp0: usp@cc080000 {
-				cell-index = <0>;
-				compatible = "sirf,marco-usp";
-				reg = <0xcc080000 0x10000>;
-				interrupts = <0 20 0>;
-				status = "disabled";
-			};
-
-			usp1: usp@cc090000 {
-				cell-index = <1>;
-				compatible = "sirf,marco-usp";
-				reg = <0xcc090000 0x10000>;
-				interrupts = <0 21 0>;
-				status = "disabled";
-			};
-
-			usp2: usp@cc0a0000 {
-				cell-index = <2>;
-				compatible = "sirf,marco-usp";
-				reg = <0xcc0a0000 0x10000>;
-				interrupts = <0 22 0>;
-				status = "disabled";
-			};
-
-			dmac0: dma-controller@cc0b0000 {
-				cell-index = <0>;
-				compatible = "sirf,marco-dmac";
-				reg = <0xcc0b0000 0x10000>;
-				interrupts = <0 12 0>;
-			};
-
-			dmac1: dma-controller@cc160000 {
-				cell-index = <1>;
-				compatible = "sirf,marco-dmac";
-				reg = <0xcc160000 0x10000>;
-				interrupts = <0 13 0>;
-			};
-
-			vip@cc0c0000 {
-				compatible = "sirf,marco-vip";
-				reg = <0xcc0c0000 0x10000>;
-			};
-
-			spi0: spi@cc0d0000 {
-				cell-index = <0>;
-				compatible = "sirf,marco-spi";
-				reg = <0xcc0d0000 0x10000>;
-				interrupts = <0 15 0>;
-				sirf,spi-num-chipselects = <1>;
-				cs-gpios = <&gpio 0 0>;
-				sirf,spi-dma-rx-channel = <25>;
-				sirf,spi-dma-tx-channel = <20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			spi1: spi@cc170000 {
-				cell-index = <1>;
-				compatible = "sirf,marco-spi";
-				reg = <0xcc170000 0x10000>;
-				interrupts = <0 16 0>;
-				sirf,spi-num-chipselects = <1>;
-				cs-gpios = <&gpio 0 0>;
-				sirf,spi-dma-rx-channel = <12>;
-				sirf,spi-dma-tx-channel = <13>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@cc0e0000 {
-				cell-index = <0>;
-				compatible = "sirf,marco-i2c";
-				reg = <0xcc0e0000 0x10000>;
-				interrupts = <0 24 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@cc0f0000 {
-				cell-index = <1>;
-				compatible = "sirf,marco-i2c";
-				reg = <0xcc0f0000 0x10000>;
-				interrupts = <0 25 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			tsc@cc110000 {
-				compatible = "sirf,marco-tsc";
-				reg = <0xcc110000 0x10000>;
-				interrupts = <0 33 0>;
-			};
-
-			gpio: pinctrl@cc120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,marco-pinctrl";
-				reg = <0xcc120000 0x10000>;
-				interrupts = <0 43 0>,
-					   <0 44 0>,
-					   <0 45 0>,
-					   <0 46 0>,
-					   <0 47 0>;
-				gpio-controller;
-				interrupt-controller;
-
-				lcd_16pins_a: lcd0_0 {
-					lcd {
-						sirf,pins = "lcd_16bitsgrp";
-						sirf,function = "lcd_16bits";
-					};
-				};
-				lcd_18pins_a: lcd0_1 {
-					lcd {
-						sirf,pins = "lcd_18bitsgrp";
-						sirf,function = "lcd_18bits";
-					};
-				};
-				lcd_24pins_a: lcd0_2 {
-					lcd {
-						sirf,pins = "lcd_24bitsgrp";
-						sirf,function = "lcd_24bits";
-					};
-				};
-				lcdrom_pins_a: lcdrom0_0 {
-					lcd {
-						sirf,pins = "lcdromgrp";
-						sirf,function = "lcdrom";
-					};
-				};
-				uart0_pins_a: uart0_0 {
-					uart {
-						sirf,pins = "uart0grp";
-						sirf,function = "uart0";
-					};
-				};
-				uart1_pins_a: uart1_0 {
-					uart {
-						sirf,pins = "uart1grp";
-						sirf,function = "uart1";
-					};
-				};
-				uart2_pins_a: uart2_0 {
-					uart {
-						sirf,pins = "uart2grp";
-						sirf,function = "uart2";
-					};
-				};
-				uart2_noflow_pins_a: uart2_1 {
-					uart {
-						sirf,pins = "uart2_nostreamctrlgrp";
-						sirf,function = "uart2_nostreamctrl";
-					};
-				};
-				spi0_pins_a: spi0_0 {
-					spi {
-						sirf,pins = "spi0grp";
-						sirf,function = "spi0";
-					};
-				};
-				spi1_pins_a: spi1_0 {
-					spi {
-						sirf,pins = "spi1grp";
-						sirf,function = "spi1";
-					};
-				};
-				i2c0_pins_a: i2c0_0 {
-					i2c {
-						sirf,pins = "i2c0grp";
-						sirf,function = "i2c0";
-					};
-				};
-				i2c1_pins_a: i2c1_0 {
-					i2c {
-						sirf,pins = "i2c1grp";
-						sirf,function = "i2c1";
-					};
-				};
-				pwm0_pins_a: pwm0_0 {
-				        pwm {
-				                sirf,pins = "pwm0grp";
-				                sirf,function = "pwm0";
-				        };
-				};
-				pwm1_pins_a: pwm1_0 {
-				        pwm {
-				                sirf,pins = "pwm1grp";
-				                sirf,function = "pwm1";
-				        };
-				};
-				pwm2_pins_a: pwm2_0 {
-				        pwm {
-				                sirf,pins = "pwm2grp";
-				                sirf,function = "pwm2";
-				        };
-				};
-				pwm3_pins_a: pwm3_0 {
-				        pwm {
-				                sirf,pins = "pwm3grp";
-				                sirf,function = "pwm3";
-				        };
-				};
-				gps_pins_a: gps_0 {
-				        gps {
-				                sirf,pins = "gpsgrp";
-				                sirf,function = "gps";
-				        };
-				};
-				vip_pins_a: vip_0 {
-				        vip {
-				                sirf,pins = "vipgrp";
-				                sirf,function = "vip";
-				        };
-				};
-				sdmmc0_pins_a: sdmmc0_0 {
-				        sdmmc0 {
-				                sirf,pins = "sdmmc0grp";
-				                sirf,function = "sdmmc0";
-				        };
-				};
-				sdmmc1_pins_a: sdmmc1_0 {
-				        sdmmc1 {
-				                sirf,pins = "sdmmc1grp";
-				                sirf,function = "sdmmc1";
-				        };
-				};
-				sdmmc2_pins_a: sdmmc2_0 {
-				        sdmmc2 {
-				                sirf,pins = "sdmmc2grp";
-				                sirf,function = "sdmmc2";
-				        };
-				};
-				sdmmc3_pins_a: sdmmc3_0 {
-				        sdmmc3 {
-				                sirf,pins = "sdmmc3grp";
-				                sirf,function = "sdmmc3";
-				        };
-				};
-				sdmmc4_pins_a: sdmmc4_0 {
-				        sdmmc4 {
-				                sirf,pins = "sdmmc4grp";
-				                sirf,function = "sdmmc4";
-				        };
-				};
-				sdmmc5_pins_a: sdmmc5_0 {
-				        sdmmc5 {
-				                sirf,pins = "sdmmc5grp";
-				                sirf,function = "sdmmc5";
-				        };
-				};
-				i2s_pins_a: i2s_0 {
-				        i2s {
-				                sirf,pins = "i2sgrp";
-				                sirf,function = "i2s";
-				        };
-				};
-				ac97_pins_a: ac97_0 {
-				        ac97 {
-				                sirf,pins = "ac97grp";
-				                sirf,function = "ac97";
-				        };
-				};
-				nand_pins_a: nand_0 {
-				        nand {
-				                sirf,pins = "nandgrp";
-				                sirf,function = "nand";
-				        };
-				};
-				usp0_pins_a: usp0_0 {
-				        usp0 {
-				                sirf,pins = "usp0grp";
-				                sirf,function = "usp0";
-				        };
-				};
-				usp1_pins_a: usp1_0 {
-				        usp1 {
-				                sirf,pins = "usp1grp";
-				                sirf,function = "usp1";
-				        };
-				};
-				usp2_pins_a: usp2_0 {
-				        usp2 {
-				                sirf,pins = "usp2grp";
-				                sirf,function = "usp2";
-				        };
-				};
-				usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus_0 {
-				        usb0_utmi_drvbus {
-				                sirf,pins = "usb0_utmi_drvbusgrp";
-				                sirf,function = "usb0_utmi_drvbus";
-				        };
-				};
-				usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus_0 {
-				        usb1_utmi_drvbus {
-				                sirf,pins = "usb1_utmi_drvbusgrp";
-				                sirf,function = "usb1_utmi_drvbus";
-				        };
-				};
-				warm_rst_pins_a: warm_rst_0 {
-				        warm_rst {
-				                sirf,pins = "warm_rstgrp";
-				                sirf,function = "warm_rst";
-				        };
-				};
-				pulse_count_pins_a: pulse_count_0 {
-				        pulse_count {
-				                sirf,pins = "pulse_countgrp";
-				                sirf,function = "pulse_count";
-				        };
-				};
-				cko0_rst_pins_a: cko0_rst_0 {
-				        cko0_rst {
-				                sirf,pins = "cko0_rstgrp";
-				                sirf,function = "cko0_rst";
-				        };
-				};
-				cko1_rst_pins_a: cko1_rst_0 {
-				        cko1_rst {
-				                sirf,pins = "cko1_rstgrp";
-				                sirf,function = "cko1_rst";
-				        };
-				};
-			};
-
-			pwm@cc130000 {
-				compatible = "sirf,marco-pwm";
-				reg = <0xcc130000 0x10000>;
-			};
-
-			efusesys@cc140000 {
-				compatible = "sirf,marco-efuse";
-				reg = <0xcc140000 0x10000>;
-			};
-
-			pulsec@cc150000 {
-				compatible = "sirf,marco-pulsec";
-				reg = <0xcc150000 0x10000>;
-				interrupts = <0 48 0>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,marco-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0xcd000000 0xcd000000 0x1000000>;
-
-				sd0: sdhci@cd000000 {
-					cell-index = <0>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd000000 0x100000>;
-					interrupts = <0 38 0>;
-					status = "disabled";
-				};
-
-				sd1: sdhci@cd100000 {
-					cell-index = <1>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd100000 0x100000>;
-					interrupts = <0 38 0>;
-					status = "disabled";
-				};
-
-				sd2: sdhci@cd200000 {
-					cell-index = <2>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd200000 0x100000>;
-					interrupts = <0 23 0>;
-					status = "disabled";
-				};
-
-				sd3: sdhci@cd300000 {
-					cell-index = <3>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd300000 0x100000>;
-					interrupts = <0 23 0>;
-					status = "disabled";
-				};
-
-				sd4: sdhci@cd400000 {
-					cell-index = <4>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd400000 0x100000>;
-					interrupts = <0 39 0>;
-					status = "disabled";
-				};
-
-				sd5: sdhci@cd500000 {
-					cell-index = <5>;
-					compatible = "sirf,marco-sdhc";
-					reg = <0xcd500000 0x100000>;
-					interrupts = <0 39 0>;
-					status = "disabled";
-				};
-
-				pci-copy@cd900000 {
-					compatible = "sirf,marco-pcicp";
-					reg = <0xcd900000 0x100000>;
-					interrupts = <0 40 0>;
-				};
-
-				rom-interface@cda00000 {
-					compatible = "sirf,marco-romif";
-					reg = <0xcda00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xc1000000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,marco-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <0 55 0>,
-					   <0 56 0>,
-					   <0 57 0>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,marco-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <0 52 0>,
-					   <0 53 0>,
-					   <0 54 0>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,marco-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <0 32 0>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xce000000 0xce000000 0x1000000>;
-
-			usb0: usb@ce000000 {
-				compatible = "chipidea,ci13611a-marco";
-				reg = <0xce000000 0x10000>;
-				interrupts = <0 10 0>;
-			};
-
-			usb1: usb@ce010000 {
-				compatible = "chipidea,ci13611a-marco";
-				reg = <0xce010000 0x10000>;
-				interrupts = <0 11 0>;
-			};
-
-			security@ce020000 {
-				compatible = "sirf,marco-security";
-				reg = <0xce020000 0x10000>;
-				interrupts = <0 42 0>;
-			};
-		};
-
-		can-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xd0000000 0xd0000000 0x1000000>;
-
-			can0: can@d0000000 {
-				compatible = "sirf,marco-can";
-				reg = <0xd0000000 0x10000>;
-			};
-
-			can1: can@d0010000 {
-				compatible = "sirf,marco-can";
-				reg = <0xd0010000 0x10000>;
-			};
-		};
-
-		lvds-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xd1000000 0xd1000000 0x1000000>;
-
-			lvds@d1000000 {
-				compatible = "sirf,marco-lvds";
-				reg = <0xd1000000 0x10000>;
-				interrupts = <0 64 0>;
-			};
-		};
-	};
-};
diff --git a/src/arm/mmp2-brownstone.dts b/src/arm/mmp2-brownstone.dts
deleted file mode 100644
index 7f70a39459f6..000000000000
--- a/src/arm/mmp2-brownstone.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-/include/ "mmp2.dtsi"
-
-/ {
-	model = "Marvell MMP2 Brownstone Development Board";
-	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
-
-	chosen {
-		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	soc {
-		apb@d4000000 {
-			uart3: uart@d4018000 {
-				status = "okay";
-			};
-			twsi1: i2c@d4011000 {
-				status = "okay";
-				pmic: max8925@3c {
-					compatible = "maxium,max8925";
-					reg = <0x3c>;
-					interrupts = <1>;
-					interrupt-parent = <&intcmux4>;
-					interrupt-controller;
-					#interrupt-cells = <1>;
-					maxim,tsc-irq = <0>;
-
-					regulators {
-						SDV1 {
-							regulator-min-microvolt = <637500>;
-							regulator-max-microvolt = <1425000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						SDV2 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2225000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						SDV3 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO1 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO2 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO3 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO4 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO5 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO6 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO7 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO8 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO9 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO10 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-						};
-						LDO11 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO12 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO13 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO14 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO15 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO16 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO17 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO18 {
-							regulator-min-microvolt = <650000>;
-							regulator-max-microvolt = <2250000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO19 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO20 {
-							regulator-min-microvolt = <750000>;
-							regulator-max-microvolt = <3900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-					};
-					backlight {
-						maxim,max8925-dual-string = <0>;
-					};
-					charger {
-						batt-detect = <0>;
-						topoff-threshold = <1>;
-						fast-charge = <7>;
-						no-temp-support = <0>;
-						no-insert-detect = <0>;
-					};
-				};
-			};
-			rtc: rtc@d4010000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/mmp2.dtsi b/src/arm/mmp2.dtsi
deleted file mode 100644
index 4e8b08c628c7..000000000000
--- a/src/arm/mmp2.dtsi
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		L2: l2-cache {
-			compatible = "marvell,tauros2-cache";
-			marvell,tauros2-cache-features = <0x3>;
-		};
-
-		axi@d4200000 {	/* AXI */
-			compatible = "mrvl,axi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			intc: interrupt-controller@d4282000 {
-				compatible = "mrvl,mmp2-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-			intcmux4: interrupt-controller@d4282150 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <4>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x150 0x4>, <0x168 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			intcmux5: interrupt-controller@d4282154 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <5>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x154 0x4>, <0x16c 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-				mrvl,clr-mfp-irq = <1>;
-			};
-
-			intcmux9: interrupt-controller@d4282180 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <9>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x180 0x4>, <0x17c 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <3>;
-			};
-
-			intcmux17: interrupt-controller@d4282158 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <17>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x158 0x4>, <0x170 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <5>;
-			};
-
-			intcmux35: interrupt-controller@d428215c {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <35>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x15c 0x4>, <0x174 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <15>;
-			};
-
-			intcmux51: interrupt-controller@d4282160 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <51>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x160 0x4>, <0x178 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-
-			intcmux55: interrupt-controller@d4282188 {
-				compatible = "mrvl,mmp2-mux-intc";
-				interrupts = <55>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x188 0x4>, <0x184 0x4>;
-				reg-names = "mux status", "mux mask";
-				mrvl,intc-nr-irqs = <2>;
-			};
-		};
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			timer0: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <13>;
-			};
-
-			uart1: uart@d4030000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4030000 0x1000>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			uart2: uart@d4017000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4017000 0x1000>;
-				interrupts = <28>;
-				status = "disabled";
-			};
-
-			uart3: uart@d4018000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4018000 0x1000>;
-				interrupts = <24>;
-				status = "disabled";
-			};
-
-			uart4: uart@d4016000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4016000 0x1000>;
-				interrupts = <46>;
-				status = "disabled";
-			};
-
-			gpio@d4019000 {
-				compatible = "marvell,mmp2-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <49>;
-				interrupt-names = "gpio_mux";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-
-				gcb4: gpio@d4019104 {
-					reg = <0xd4019104 0x4>;
-				};
-
-				gcb5: gpio@d4019108 {
-					reg = <0xd4019108 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4025000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4025000 0x1000>;
-				interrupts = <58>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <1 0>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				interrupt-parent = <&intcmux5>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/moxart-uc7112lx.dts b/src/arm/moxart-uc7112lx.dts
deleted file mode 100644
index 10d088df0c35..000000000000
--- a/src/arm/moxart-uc7112lx.dts
+++ /dev/null
@@ -1,117 +0,0 @@
-/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
- *
- * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-/include/ "moxart.dtsi"
-
-/ {
-	model = "MOXA UC-7112-LX";
-	compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
-	clocks {
-		ref12: ref12M {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-	};
-
-	flash@80000000,0 {
-		compatible = "numonyx,js28f128", "cfi-flash";
-		reg = <0x80000000 0x1000000>;
-		bank-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x40000>;
-		};
-		partition@40000 {
-			label = "linux kernel";
-			reg = <0x40000 0x1C0000>;
-		};
-		partition@200000 {
-			label = "root filesystem";
-			reg = <0x200000 0x800000>;
-		};
-		partition@a00000 {
-			label = "user filesystem";
-			reg = <0xa00000 0x600000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		user-led {
-			label = "ready-led";
-			gpios = <&gpio 27 0x1>;
-			default-state = "on";
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	gpio_keys_polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <500>;
-		button@25 {
-			label = "GPIO Reset";
-			linux,code = <116>;
-			gpios = <&gpio 25 1>;
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
-	};
-};
-
-&clk_pll {
-	clocks = <&ref12>;
-};
-
-&sdhci {
-	status = "okay";
-};
-
-&mdio0 {
-	status = "okay";
-
-	ethphy0: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&mdio1 {
-	status = "okay";
-
-	ethphy1: ethernet-phy@1 {
-		device_type = "ethernet-phy";
-		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
-};
-
-&mac0 {
-	status = "okay";
-};
-
-&mac1 {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/moxart.dtsi b/src/arm/moxart.dtsi
deleted file mode 100644
index 1fd27ed65a01..000000000000
--- a/src/arm/moxart.dtsi
+++ /dev/null
@@ -1,148 +0,0 @@
-/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
- *
- * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "moxa,moxart";
-	model = "MOXART";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "faraday,fa526";
-			reg = <0>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x90000000 0x10000000>;
-		ranges;
-
-		intc: interrupt-controller@98800000 {
-			compatible = "moxa,moxart-ic";
-			reg = <0x98800000 0x38>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-mask = <0x00080000>;
-		};
-
-		clk_pll: clk_pll@98100000 {
-			compatible = "moxa,moxart-pll-clock";
-			#clock-cells = <0>;
-			reg = <0x98100000 0x34>;
-		};
-
-		clk_apb: clk_apb@98100000 {
-			compatible = "moxa,moxart-apb-clock";
-			#clock-cells = <0>;
-			reg = <0x98100000 0x34>;
-			clocks = <&clk_pll>;
-		};
-
-		timer: timer@98400000 {
-			compatible = "moxa,moxart-timer";
-			reg = <0x98400000 0x42>;
-			interrupts = <19 1>;
-			clocks = <&clk_apb>;
-		};
-
-		gpio: gpio@98700000 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			compatible = "moxa,moxart-gpio";
-			reg = <0x98700000 0xC>;
-		};
-
-		rtc: rtc {
-			compatible = "moxa,moxart-rtc";
-			gpio-rtc-sclk = <&gpio 5 0>;
-			gpio-rtc-data = <&gpio 6 0>;
-			gpio-rtc-reset = <&gpio 7 0>;
-		};
-
-		dma: dma@90500000 {
-			compatible = "moxa,moxart-dma";
-			reg = <0x90500080 0x40>;
-			interrupts = <24 0>;
-			#dma-cells = <1>;
-		};
-
-		watchdog: watchdog@98500000 {
-			compatible = "moxa,moxart-watchdog";
-			reg = <0x98500000 0x10>;
-			clocks = <&clk_apb>;
-		};
-
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
-			reg = <0x98e00000 0x5C>;
-			interrupts = <5 0>;
-			clocks = <&clk_apb>;
-			dmas =  <&dma 5>,
-				<&dma 5>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mdio0: mdio@90900090 {
-			compatible = "moxa,moxart-mdio";
-			reg = <0x90900090 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mdio1: mdio@92000090 {
-			compatible = "moxa,moxart-mdio";
-			reg = <0x92000090 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mac0: mac@90900000 {
-			compatible = "moxa,moxart-mac";
-			reg = <0x90900000 0x90>;
-			interrupts = <25 0>;
-			phy-handle = <&ethphy0>;
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		mac1: mac@92000000 {
-			compatible = "moxa,moxart-mac";
-			reg = <0x92000000 0x90>;
-			interrupts = <27 0>;
-			phy-handle = <&ethphy1>;
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		uart0: uart@98200000 {
-			compatible = "ns16550a";
-			reg = <0x98200000 0x20>;
-			interrupts = <31 8>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <14745600>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/mt6589-aquaris5.dts b/src/arm/mt6589-aquaris5.dts
deleted file mode 100644
index 443b4467de15..000000000000
--- a/src/arm/mt6589-aquaris5.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2014 MundoReader S.L.
- * Author: Matthias Brugger <matthias.bgg@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "mt6589.dtsi"
-
-/ {
-	model = "bq Aquaris5";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-};
diff --git a/src/arm/mt6589.dtsi b/src/arm/mt6589.dtsi
deleted file mode 100644
index d0297a051549..000000000000
--- a/src/arm/mt6589.dtsi
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (c) 2014 MundoReader S.L.
- * Author: Matthias Brugger <matthias.bgg@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "mediatek,mt6589";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x3>;
-		};
-
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		system_clk: dummy13m {
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-			#clock-cells = <0>;
-		};
-
-		rtc_clk: dummy32k {
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-			#clock-cells = <0>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		timer: timer@10008000 {
-			compatible = "mediatek,mt6577-timer";
-			reg = <0x10008000 0x80>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&system_clk>, <&rtc_clk>;
-			clock-names = "system-clk", "rtc-clk";
-		};
-
-		gic: interrupt-controller@10212000 {
-			compatible = "arm,cortex-a15-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x10211000 0x1000>,
-			      <0x10212000 0x1000>,
-			      <0x10214000 0x2000>,
-			      <0x10216000 0x2000>;
-		};
-	};
-};
diff --git a/src/arm/mxs-pinfunc.h b/src/arm/mxs-pinfunc.h
deleted file mode 100644
index c6da987b20cb..000000000000
--- a/src/arm/mxs-pinfunc.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Header providing constants for i.MX28 pinctrl bindings.
- *
- * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
-#define __DT_BINDINGS_MXS_PINCTRL_H__
-
-/* fsl,drive-strength property */
-#define MXS_DRIVE_4mA		0
-#define MXS_DRIVE_8mA		1
-#define MXS_DRIVE_12mA		2
-#define MXS_DRIVE_16mA		3
-
-/* fsl,voltage property */
-#define MXS_VOLTAGE_LOW		0
-#define MXS_VOLTAGE_HIGH	1
-
-/* fsl,pull-up property */
-#define MXS_PULL_DISABLE	0
-#define MXS_PULL_ENABLE		1
-
-#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/src/arm/nspire-classic.dtsi b/src/arm/nspire-classic.dtsi
deleted file mode 100644
index 9565199bce7a..000000000000
--- a/src/arm/nspire-classic.dtsi
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-classic.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-
-/include/ "nspire.dtsi"
-
-&lcd {
-	lcd-type = "classic";
-};
-
-&fast_timer {
-	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
-};
-
-&uart {
-	compatible = "ns16550";
-	reg-shift = <2>;
-	reg-io-width = <4>;
-	clocks = <&apb_pclk>;
-	no-loopback-test;
-};
-
-&timer0 {
-	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
-};
-
-&timer1 {
-	compatible = "lsi,zevio-timer";
-	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
-};
-
-&keypad {
-	active-low;
-
-};
-
-&base_clk {
-	compatible = "lsi,nspire-classic-clock";
-};
-
-&ahb_clk {
-	compatible = "lsi,nspire-classic-ahb-divider";
-};
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x10000000 0x2000000>; /* 32 MB */
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		intc: interrupt-controller@DC000000 {
-			compatible = "lsi,zevio-intc";
-			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-	};
-	chosen {
-		bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
-	};
-};
diff --git a/src/arm/nspire-clp.dts b/src/arm/nspire-clp.dts
deleted file mode 100644
index fa5a044656de..000000000000
--- a/src/arm/nspire-clp.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-clp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00020039
-	0x0004002c 	0x00050034 	0x00060015
-	0x0007000b 	0x0008002d 	0x01000033
-	0x0101004e 	0x01020011 	0x01030004
-	0x0104002f 	0x01050003 	0x01060016
-	0x01070002 	0x01080014 	0x02000062
-	0x0201000c 	0x0202001f 	0x02030007
-	0x02040013 	0x02050006 	0x02060010
-	0x02070005 	0x02080019 	0x03000027
-	0x03010037 	0x03020018 	0x0303000a
-	0x03040031 	0x03050009 	0x03060032
-	0x03070008 	0x03080026 	0x04000028
-	0x04010035 	0x04020025 	0x04040024
-	0x04060017 	0x04080023 	0x05000028
-	0x05020022 	0x0503001b 	0x05040021
-	0x0505001a 	0x05060012 	0x0507006f
-	0x05080020 	0x0509002a 	0x0601001c
-	0x0602002e 	0x06030068 	0x06040030
-	0x0605006d 	0x0606001e 	0x06070001
-	0x0608002b 	0x0609000f 	0x07000067
-	0x0702006a 	0x0704006c 	0x07060069
-	0x0707000e 	0x0708001d 	0x070a000d
-	>;
-};
-
-/ {
-	model = "TI-NSPIRE Clickpad";
-	compatible = "ti,nspire-clp";
-};
diff --git a/src/arm/nspire-cx.dts b/src/arm/nspire-cx.dts
deleted file mode 100644
index 375b924f60d8..000000000000
--- a/src/arm/nspire-cx.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-cx.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-
-/include/ "nspire.dtsi"
-
-&lcd {
-	lcd-type = "cx";
-};
-
-&fast_timer {
-	/* compatible = "arm,sp804", "arm,primecell"; */
-};
-
-&uart {
-	compatible = "arm,pl011", "arm,primecell";
-
-	clocks = <&uart_clk>, <&apb_pclk>;
-	clock-names = "uart_clk", "apb_pclk";
-};
-
-&timer0 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&timer1 {
-	compatible = "arm,sp804", "arm,primecell";
-};
-
-&base_clk {
-	compatible = "lsi,nspire-cx-clock";
-};
-
-&ahb_clk {
-	compatible = "lsi,nspire-cx-ahb-divider";
-};
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-/ {
-	model = "TI-NSPIRE CX";
-	compatible = "ti,nspire-cx";
-
-	memory {
-		device_type = "memory";
-		reg = <0x10000000 0x4000000>; /* 64 MB */
-	};
-
-	uart_clk: uart_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		intc: interrupt-controller@DC000000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		apb@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			i2c@90050000 {
-				compatible = "snps,designware-i2c";
-				reg = <0x90050000 0x1000>;
-				interrupts = <20>;
-			};
-		};
-	};
-	chosen {
-		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
-	};
-};
diff --git a/src/arm/nspire-tp.dts b/src/arm/nspire-tp.dts
deleted file mode 100644
index 621391ce6ed6..000000000000
--- a/src/arm/nspire-tp.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire-tp.dts
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-/dts-v1/;
-
-/include/ "nspire-classic.dtsi"
-
-&keypad {
-	linux,keymap = <
-	0x0000001c 	0x0001001c 	0x00040039
-	0x0005002c 	0x00060015 	0x0007000b
-	0x0008000f 	0x0100002d 	0x01010011
-	0x0102002f 	0x01030004 	0x01040016
-	0x01050014 	0x0106001f 	0x01070002
-	0x010a006a 	0x02000013 	0x02010010
-	0x02020019 	0x02030007 	0x02040018
-	0x02050031 	0x02060032 	0x02070005
-	0x02080028 	0x0209006c 	0x03000026
-	0x03010025 	0x03020024 	0x0303000a
-	0x03040017 	0x03050023 	0x03060022
-	0x03070008 	0x03080035 	0x03090069
-	0x04000021 	0x04010012 	0x04020020
-	0x0404002e 	0x04050030 	0x0406001e
-	0x0407000d 	0x04080037 	0x04090067
-	0x05010038 	0x0502000c 	0x0503001b
-	0x05040034 	0x0505001a 	0x05060006
-	0x05080027 	0x0509000e 	0x050a006f
-	0x0600002b 	0x0602004e 	0x06030068
-	0x06040003 	0x0605006d 	0x06060009
-	0x06070001 	0x0609000f 	0x0708002a
-	0x0709001d 	0x070a0033 	>;
-};
-
-/ {
-	model = "TI-NSPIRE Touchpad";
-	compatible = "ti,nspire-tp";
-};
diff --git a/src/arm/nspire.dtsi b/src/arm/nspire.dtsi
deleted file mode 100644
index a22ffe633b49..000000000000
--- a/src/arm/nspire.dtsi
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- *  linux/arch/arm/boot/nspire.dtsi
- *
- *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&intc>;
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
-		};
-	};
-
-	bootrom: bootrom@00000000 {
-		reg = <0x00000000 0x80000>;
-	};
-
-	sram: sram@A4000000 {
-		device = "memory";
-		reg = <0xA4000000 0x20000>;
-	};
-
-	timer_clk: timer_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	base_clk: base_clk {
-		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
-	};
-
-	ahb_clk: ahb_clk {
-		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
-		clocks = <&base_clk>;
-	};
-
-	apb_pclk: apb_pclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&ahb_clk>;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi: spi@A9000000 {
-			reg = <0xA9000000 0x1000>;
-		};
-
-		usb0: usb@B0000000 {
-			reg = <0xB0000000 0x1000>;
-			interrupts = <8>;
-		};
-
-		usb1: usb@B4000000 {
-			reg = <0xB4000000 0x1000>;
-			interrupts = <9>;
-			status = "disabled";
-		};
-
-		lcd: lcd@C0000000 {
-			compatible = "arm,pl111", "arm,primecell";
-			reg = <0xC0000000 0x1000>;
-			interrupts = <21>;
-
-			clocks = <&apb_pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		adc: adc@C4000000 {
-			reg = <0xC4000000 0x1000>;
-			interrupts = <11>;
-		};
-
-		tdes: crypto@C8010000 {
-			reg = <0xC8010000 0x1000>;
-		};
-
-		sha256: crypto@CC000000 {
-			reg = <0xCC000000 0x1000>;
-		};
-
-		apb@90000000 {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clock-ranges;
-			ranges;
-
-			gpio: gpio@90000000 {
-				reg = <0x90000000 0x1000>;
-				interrupts = <7>;
-			};
-
-			fast_timer: timer@90010000 {
-				reg = <0x90010000 0x1000>;
-				interrupts = <17>;
-			};
-
-			uart: serial@90020000 {
-				reg = <0x90020000 0x1000>;
-				interrupts = <1>;
-			};
-
-			timer0: timer@900C0000 {
-				reg = <0x900C0000 0x1000>;
-
-				clocks = <&timer_clk>;
-			};
-
-			timer1: timer@900D0000 {
-				reg = <0x900D0000 0x1000>;
-				interrupts = <19>;
-
-				clocks = <&timer_clk>;
-			};
-
-			watchdog: watchdog@90060000 {
-				compatible = "arm,amba-primecell";
-				reg = <0x90060000 0x1000>;
-				interrupts = <3>;
-			};
-
-			rtc: rtc@90090000 {
-				reg = <0x90090000 0x1000>;
-				interrupts = <4>;
-			};
-
-			misc: misc@900A0000 {
-				reg = <0x900A0000 0x1000>;
-			};
-
-			pwr: pwr@900B0000 {
-				reg = <0x900B0000 0x1000>;
-				interrupts = <15>;
-			};
-
-			keypad: input@900E0000 {
-				compatible = "ti,nspire-keypad";
-				reg = <0x900E0000 0x1000>;
-				interrupts = <16>;
-
-				scan-interval = <1000>;
-				row-delay = <200>;
-
-				clocks = <&apb_pclk>;
-			};
-
-			contrast: contrast@900F0000 {
-				reg = <0x900F0000 0x1000>;
-			};
-
-			led: led@90110000 {
-				reg = <0x90110000 0x1000>;
-			};
-		};
-	};
-};
diff --git a/src/arm/omap-gpmc-smsc911x.dtsi b/src/arm/omap-gpmc-smsc911x.dtsi
deleted file mode 100644
index 521c587acaee..000000000000
--- a/src/arm/omap-gpmc-smsc911x.dtsi
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Common file for GPMC connected smsc911x on omaps
- *
- * Note that the board specifc DTS file needs to specify
- * ranges, pinctrl, reg, interrupt parent and interrupts.
- */
-
-/ {
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
-&gpmc {
-	ethernet@gpmc {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		bank-width = <2>;
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <1>;
-		gpmc,cs-rd-off-ns = <180>;
-		gpmc,cs-wr-off-ns = <180>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <144>;
-		gpmc,page-burst-access-ns = <24>;
-		gpmc,bus-turnaround-ns = <90>;
-		gpmc,cycle2cycle-delay-ns = <90>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-	};
-};
diff --git a/src/arm/omap-gpmc-smsc9221.dtsi b/src/arm/omap-gpmc-smsc9221.dtsi
deleted file mode 100644
index 73e272fadc20..000000000000
--- a/src/arm/omap-gpmc-smsc9221.dtsi
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Common file for GPMC connected smsc9221 on omaps
- *
- * Compared to smsc911x, smsc9221 (and others like smsc9217
- * or smsc 9218) has faster timings, leading to higher
- * bandwidth.
- *
- * Note that the board specifc DTS file needs to specify
- * ranges, pinctrl, reg, interrupt parent and interrupts.
- */
-
-/ {
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
-&gpmc {
-	ethernet@gpmc {
-		compatible = "smsc,lan9221","smsc,lan9115";
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <42>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <12>;
-		gpmc,adv-wr-off-ns = <12>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <42>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <36>;
-		gpmc,rd-cycle-ns = <60>;
-		gpmc,wr-cycle-ns = <54>;
-		gpmc,access-ns = <36>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <18>;
-		gpmc,wr-access-ns = <42>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-	};
-};
diff --git a/src/arm/omap-zoom-common.dtsi b/src/arm/omap-zoom-common.dtsi
deleted file mode 100644
index 68221fab978d..000000000000
--- a/src/arm/omap-zoom-common.dtsi
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Common features on the Zoom debug board
- */
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-&gpmc {
-	ranges = <3 0 0x10000000 0x00000400>,
-		 <7 0 0x2c000000 0x01000000>;
-
-	/*
-	 * Four port TL16CP754C serial port on GPMC,
-	 * they probably share the same GPIO IRQ
-	 * REVISIT: Add timing support from slls644g.pdf
-	 */
-	uart@3,0 {
-		compatible = "ns16550a";
-		reg = <3 0 0x100>;
-		bank-width = <2>;
-		reg-shift = <1>;
-		reg-io-width = <1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
-		clock-frequency = <1843200>;
-		current-speed = <115200>;
-	};
-
-	ethernet@gpmc {
-		reg = <7 0 0xff>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;	/* gpio158 */
-	};
-};
diff --git a/src/arm/omap2.dtsi b/src/arm/omap2.dtsi
deleted file mode 100644
index 8f8c07da4ac1..000000000000
--- a/src/arm/omap2.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Device Tree Source for OMAP2 SoC
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1136jf-s";
-			device_type = "cpu";
-		};
-	};
-
-	pmu {
-		compatible = "arm,arm1136-pmu";
-		interrupts = <3>;
-	};
-
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap2-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		aes: aes@480a6000 {
-			compatible = "ti,omap2-aes";
-			ti,hwmods = "aes";
-			reg = <0x480a6000 0x50>;
-			dmas = <&sdma 9 &sdma 10>;
-			dma-names = "tx", "rx";
-		};
-
-		hdq1w: 1w@480b2000 {
-			compatible = "ti,omap2420-1w";
-			ti,hwmods = "hdq1w";
-			reg = <0x480b2000 0x1000>;
-			interrupts = <58>;
-		};
-
-		intc: interrupt-controller@1 {
-			compatible = "ti,omap2-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <96>;
-			reg = <0x480FE000 0x1000>;
-		};
-
-		sdma: dma-controller@48056000 {
-			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
-			ti,hwmods = "dma";
-			reg = <0x48056000 0x1000>;
-			interrupts = <12>,
-				     <13>,
-				     <14>,
-				     <15>;
-			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <64>;
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap2-i2c";
-			ti,hwmods = "i2c1";
-			reg = <0x48070000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <56>;
-			dmas = <&sdma 27 &sdma 28>;
-			dma-names = "tx", "rx";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap2-i2c";
-			ti,hwmods = "i2c2";
-			reg = <0x48072000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <57>;
-			dmas = <&sdma 29 &sdma 30>;
-			dma-names = "tx", "rx";
-		};
-
-		mcspi1: mcspi@48098000 {
-			compatible = "ti,omap2-mcspi";
-			ti,hwmods = "mcspi1";
-			reg = <0x48098000 0x100>;
-			interrupts = <65>;
-			dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
-				&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: mcspi@4809a000 {
-			compatible = "ti,omap2-mcspi";
-			ti,hwmods = "mcspi2";
-			reg = <0x4809a000 0x100>;
-			interrupts = <66>;
-			dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		rng: rng@480a0000 {
-			compatible = "ti,omap2-rng";
-			ti,hwmods = "rng";
-			reg = <0x480a0000 0x50>;
-			interrupts = <52>;
-		};
-
-		sham: sham@480a4000 {
-			compatible = "ti,omap2-sham";
-			ti,hwmods = "sham";
-			reg = <0x480a4000 0x64>;
-			interrupts = <51>;
-			dmas = <&sdma 13>;
-			dma-names = "rx";
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart1";
-			reg = <0x4806a000 0x2000>;
-			interrupts = <72>;
-			dmas = <&sdma 49 &sdma 50>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart2";
-			reg = <0x4806c000 0x400>;
-			interrupts = <73>;
-			dmas = <&sdma 51 &sdma 52>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@4806e000 {
-			compatible = "ti,omap2-uart";
-			ti,hwmods = "uart3";
-			reg = <0x4806e000 0x400>;
-			interrupts = <74>;
-			dmas = <&sdma 53 &sdma 54>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		timer2: timer@4802a000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4802a000 0x400>;
-			interrupts = <38>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48078000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48078000 0x400>;
-			interrupts = <39>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@4807a000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4807a000 0x400>;
-			interrupts = <40>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@4807c000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4807c000 0x400>;
-			interrupts = <41>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-		};
-
-		timer6: timer@4807e000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4807e000 0x400>;
-			interrupts = <42>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-		};
-
-		timer7: timer@48080000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48080000 0x400>;
-			interrupts = <43>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@48082000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48082000 0x400>;
-			interrupts = <44>;
-			ti,hwmods = "timer8";
-			ti,timer-dsp;
-		};
-
-		timer9: timer@48084000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48084000 0x400>;
-			interrupts = <45>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48086000 0x400>;
-			interrupts = <46>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48088000 0x400>;
-			interrupts = <47>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		timer12: timer@4808a000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x4808a000 0x400>;
-			interrupts = <48>;
-			ti,hwmods = "timer12";
-			ti,timer-pwm;
-		};
-
-		dss: dss@48050000 {
-			compatible = "ti,omap2-dss";
-			reg = <0x48050000 0x400>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@48050400 {
-				compatible = "ti,omap2-dispc";
-				reg = <0x48050400 0x400>;
-				interrupts = <25>;
-				ti,hwmods = "dss_dispc";
-			};
-
-			rfbi: encoder@48050800 {
-				compatible = "ti,omap2-rfbi";
-				reg = <0x48050800 0x400>;
-				status = "disabled";
-				ti,hwmods = "dss_rfbi";
-			};
-
-			venc: encoder@48050c00 {
-				compatible = "ti,omap2-venc";
-				reg = <0x48050c00 0x400>;
-				status = "disabled";
-				ti,hwmods = "dss_venc";
-			};
-		};
-	};
-};
diff --git a/src/arm/omap2420-clocks.dtsi b/src/arm/omap2420-clocks.dtsi
deleted file mode 100644
index ce8c742d7e92..000000000000
--- a/src/arm/omap2420-clocks.dtsi
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Device Tree Source for OMAP2420 clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&prcm_clocks {
-	sys_clkout2_src_gate: sys_clkout2_src_gate {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <15>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout2_src_mux: sys_clkout2_src_mux {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout2_src: sys_clkout2_src {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
-	};
-
-	sys_clkout2: sys_clkout2 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkout2_src>;
-		ti,bit-shift = <11>;
-		ti,max-div = <64>;
-		reg = <0x0070>;
-		ti,index-power-of-two;
-	};
-
-	dsp_gate_ick: dsp_gate_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <1>;
-		reg = <0x0810>;
-	};
-
-	dsp_div_ick: dsp_div_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <5>;
-		ti,max-div = <3>;
-		reg = <0x0840>;
-		ti,index-starts-at-one;
-	};
-
-	dsp_ick: dsp_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
-	};
-
-	iva1_gate_ifck: iva1_gate_ifck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0800>;
-	};
-
-	iva1_div_ifck: iva1_div_ifck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0840>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
-	};
-
-	iva1_ifck: iva1_ifck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>;
-	};
-
-	iva1_ifck_div: iva1_ifck_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&iva1_ifck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	iva1_mpu_int_ifck: iva1_mpu_int_ifck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&iva1_ifck_div>;
-		ti,bit-shift = <8>;
-		reg = <0x0800>;
-	};
-
-	wdt3_ick: wdt3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <28>;
-		reg = <0x0210>;
-	};
-
-	wdt3_fck: wdt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <28>;
-		reg = <0x0200>;
-	};
-
-	mmc_ick: mmc_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x0210>;
-	};
-
-	mmc_fck: mmc_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x0200>;
-	};
-
-	eac_ick: eac_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0210>;
-	};
-
-	eac_fck: eac_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0200>;
-	};
-
-	i2c1_fck: i2c1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0200>;
-	};
-
-	i2c2_fck: i2c2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0200>;
-	};
-
-	vlynq_ick: vlynq_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0210>;
-	};
-
-	vlynq_gate_fck: vlynq_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0200>;
-	};
-
-	core_d18_ck: core_d18_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <18>;
-	};
-
-	vlynq_mux_fck: vlynq_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
-		ti,bit-shift = <15>;
-		reg = <0x0240>;
-	};
-
-	vlynq_fck: vlynq_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>;
-	};
-};
-
-&prcm_clockdomains {
-	gfx_clkdm: gfx_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gfx_ick>;
-	};
-
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
-			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
-			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>;
-	};
-
-	iva1_clkdm: iva1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&iva1_mpu_int_ifck>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_ick>, <&dss_54m_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
-			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
-			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
-			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>,
-			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
-			 <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>,
-			 <&uart3_ick>, <&uart3_fck>, <&cam_ick>,
-			 <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>,
-			 <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>,
-			 <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>,
-			 <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>,
-			 <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>,
-			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
-			 <&pka_ick>;
-	};
-};
-
-&func_96m_ck {
-	compatible = "fixed-factor-clock";
-	clocks = <&apll96_ck>;
-	clock-mult = <1>;
-	clock-div = <1>;
-};
-
-&dsp_div_fck {
-	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
-};
-
-&ssi_ssr_sst_div_fck {
-	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-};
diff --git a/src/arm/omap2420-h4.dts b/src/arm/omap2420-h4.dts
deleted file mode 100644
index 34cdecb4fdda..000000000000
--- a/src/arm/omap2420-h4.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap2420.dtsi"
-
-/ {
-	model = "TI OMAP2420 H4 board";
-	compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x4000000>; /* 64 MB */
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x08000000 0x04000000>;
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		linux,mtd-name= "intel,ge28f256l18b85";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x04000000>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <160>;
-		gpmc,cs-wr-off-ns = <160>;
-		gpmc,adv-on-ns = <20>;
-		gpmc,adv-rd-off-ns = <50>;
-		gpmc,adv-wr-off-ns = <50>;
-		gpmc,oe-on-ns = <60>;
-		gpmc,oe-off-ns = <120>;
-		gpmc,we-on-ns = <60>;
-		gpmc,we-off-ns = <120>;
-		gpmc,rd-cycle-ns = <170>;
-		gpmc,wr-cycle-ns = <170>;
-		gpmc,access-ns = <150>;
-		gpmc,page-burst-access-ns = <10>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0 0x20000>;
-		};
-		partition@20000 {
-			label = "params";
-			reg = <0x20000 0x20000>;
-		};
-		partition@40000 {
-			label = "kernel";
-			reg = <0x40000 0x200000>;
-		};
-		partition@240000 {
-			label = "file-system";
-			reg = <0x240000 0x3dc0000>;
-		};
-	};
-};
diff --git a/src/arm/omap2420-n800.dts b/src/arm/omap2420-n800.dts
deleted file mode 100644
index d8c1b423606a..000000000000
--- a/src/arm/omap2420-n800.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
-	model = "Nokia N800";
-	compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-};
diff --git a/src/arm/omap2420-n810-wimax.dts b/src/arm/omap2420-n810-wimax.dts
deleted file mode 100644
index 6b25b0359ac9..000000000000
--- a/src/arm/omap2420-n810-wimax.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
-	model = "Nokia N810 WiMax";
-	compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-};
diff --git a/src/arm/omap2420-n810.dts b/src/arm/omap2420-n810.dts
deleted file mode 100644
index 21baec154b78..000000000000
--- a/src/arm/omap2420-n810.dts
+++ /dev/null
@@ -1,8 +0,0 @@
-/dts-v1/;
-
-#include "omap2420-n8x0-common.dtsi"
-
-/ {
-	model = "Nokia N810";
-	compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
-};
diff --git a/src/arm/omap2420-n8x0-common.dtsi b/src/arm/omap2420-n8x0-common.dtsi
deleted file mode 100644
index 89608b206519..000000000000
--- a/src/arm/omap2420-n8x0-common.dtsi
+++ /dev/null
@@ -1,99 +0,0 @@
-#include "omap2420.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128 MB */
-	};
-
-	ocp {
-		i2c@0 {
-			compatible = "i2c-cbus-gpio";
-			gpios = <&gpio3 2 0 /* gpio66 clk */
-				 &gpio3 1 0 /* gpio65 dat */
-				 &gpio3 0 0 /* gpio64 sel */
-				>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			retu_mfd: retu@1 {
-				compatible = "retu-mfd";
-				interrupt-parent = <&gpio4>;
-				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-				reg = <0x1>;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x10000000>;
-
-	/* gpio-irq for dma: 26 */
-
-	onenand@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x10000000>;
-
-		gpmc,sync-read;
-		gpmc,burst-length = <16>;
-		gpmc,burst-read;
-		gpmc,burst-wrap;
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <127>;
-		gpmc,cs-wr-off-ns = <109>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <18>;
-		gpmc,oe-on-ns = <27>;
-		gpmc,oe-off-ns = <127>;
-		gpmc,we-on-ns = <27>;
-		gpmc,we-off-ns = <72>;
-		gpmc,rd-cycle-ns = <145>;
-		gpmc,wr-cycle-ns = <136>;
-		gpmc,access-ns = <118>;
-		gpmc,page-burst-access-ns = <27>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <9>;
-		gpmc,sync-clk-ps = <27000>;
-
-		/* MTD partition table corresponding to old board-n8x0 file. */
-		partition@0 {
-			label = "bootloader";
-			reg = <0x00000000 0x00020000>;
-			read-only;
-		};
-		partition@1 {
-			label = "config";
-			reg = <0x00020000 0x00060000>;
-		};
-		partition@2 {
-			label = "kernel";
-			reg = <0x00080000 0x00200000>;
-		};
-		partition@3 {
-			label = "initfs";
-			reg = <0x00280000 0x00400000>;
-		};
-		partition@4 {
-			label = "rootfs";
-			reg = <0x00680000 0x0f980000>;
-		};
-		partition@5 {
-			label = "omap2-onenand";
-			reg = <0x00000000 0x10000000>;
-		};
-	};
-};
diff --git a/src/arm/omap2420.dtsi b/src/arm/omap2420.dtsi
deleted file mode 100644
index 9be3c1266378..000000000000
--- a/src/arm/omap2420.dtsi
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Device Tree Source for OMAP2420 SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap2.dtsi"
-
-/ {
-	compatible = "ti,omap2420", "ti,omap2";
-
-	ocp {
-		prcm: prcm@48008000 {
-			compatible = "ti,omap2-prcm";
-			reg = <0x48008000 0x1000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@48000000 {
-			compatible = "ti,omap2-scrm";
-			reg = <0x48000000 0x1000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@48004000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x48004000 0x20>;
-			ti,hwmods = "counter_32k";
-		};
-
-		omap2420_pmx: pinmux@48000030 {
-			compatible = "ti,omap2420-padconf", "pinctrl-single";
-			reg = <0x48000030 0x0113>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <8>;
-			pinctrl-single,function-mask = <0x3f>;
-		};
-
-		gpio1: gpio@48018000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x48018000 0x200>;
-			interrupts = <29>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio2: gpio@4801a000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4801a000 0x200>;
-			interrupts = <30>;
-			ti,hwmods = "gpio2";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio3: gpio@4801c000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4801c000 0x200>;
-			interrupts = <31>;
-			ti,hwmods = "gpio3";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio4: gpio@4801e000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4801e000 0x200>;
-			interrupts = <32>;
-			ti,hwmods = "gpio4";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpmc: gpmc@6800a000 {
-			compatible = "ti,omap2420-gpmc";
-			reg = <0x6800a000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <20>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-		};
-
-		mcbsp1: mcbsp@48074000 {
-			compatible = "ti,omap2420-mcbsp";
-			reg = <0x48074000 0xff>;
-			reg-names = "mpu";
-			interrupts = <59>, /* TX interrupt */
-				     <60>; /* RX interrupt */
-			interrupt-names = "tx", "rx";
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@48076000 {
-			compatible = "ti,omap2420-mcbsp";
-			reg = <0x48076000 0xff>;
-			reg-names = "mpu";
-			interrupts = <62>, /* TX interrupt */
-				     <63>; /* RX interrupt */
-			interrupt-names = "tx", "rx";
-			ti,hwmods = "mcbsp2";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		msdi1: mmc@4809c000 {
-			compatible = "ti,omap2420-mmc";
-			ti,hwmods = "msdi1";
-			reg = <0x4809c000 0x80>;
-			interrupts = <83>;
-			dmas = <&sdma 61 &sdma 62>;
-			dma-names = "tx", "rx";
-		};
-
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap2-mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>, <34>;
-			interrupt-names = "dsp", "iva";
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <6>;
-		};
-
-		timer1: timer@48028000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x48028000 0x400>;
-			interrupts = <37>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		wd_timer2: wdt@48022000 {
-			compatible = "ti,omap2-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x48022000 0x80>;
-		};
-	};
-};
-
-&i2c1 {
-	compatible = "ti,omap2420-i2c";
-};
-
-&i2c2 {
-	compatible = "ti,omap2420-i2c";
-};
-
-/include/ "omap24xx-clocks.dtsi"
-/include/ "omap2420-clocks.dtsi"
diff --git a/src/arm/omap2430-clocks.dtsi b/src/arm/omap2430-clocks.dtsi
deleted file mode 100644
index 805f75df1cf2..000000000000
--- a/src/arm/omap2430-clocks.dtsi
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * Device Tree Source for OMAP2430 clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&scrm_clocks {
-	mcbsp3_mux_fck: mcbsp3_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		reg = <0x02e8>;
-	};
-
-	mcbsp3_fck: mcbsp3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
-	};
-
-	mcbsp4_mux_fck: mcbsp4_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x02e8>;
-	};
-
-	mcbsp4_fck: mcbsp4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
-	};
-
-	mcbsp5_mux_fck: mcbsp5_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <4>;
-		reg = <0x02e8>;
-	};
-
-	mcbsp5_fck: mcbsp5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
-	};
-};
-
-&prcm_clocks {
-	iva2_1_gate_ick: iva2_1_gate_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0800>;
-	};
-
-	iva2_1_div_ick: iva2_1_div_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&dsp_fck>;
-		ti,bit-shift = <5>;
-		ti,max-div = <3>;
-		reg = <0x0840>;
-		ti,index-starts-at-one;
-	};
-
-	iva2_1_ick: iva2_1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
-	};
-
-	mdm_gate_ick: mdm_gate_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0c10>;
-	};
-
-	mdm_div_ick: mdm_div_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		reg = <0x0c40>;
-		ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>;
-	};
-
-	mdm_ick: mdm_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
-	};
-
-	mdm_osc_ck: mdm_osc_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&osc_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0c00>;
-	};
-
-	mcbsp3_ick: mcbsp3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0214>;
-	};
-
-	mcbsp3_gate_fck: mcbsp3_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <3>;
-		reg = <0x0204>;
-	};
-
-	mcbsp4_ick: mcbsp4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0214>;
-	};
-
-	mcbsp4_gate_fck: mcbsp4_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <4>;
-		reg = <0x0204>;
-	};
-
-	mcbsp5_ick: mcbsp5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0214>;
-	};
-
-	mcbsp5_gate_fck: mcbsp5_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <5>;
-		reg = <0x0204>;
-	};
-
-	mcspi3_ick: mcspi3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0214>;
-	};
-
-	mcspi3_fck: mcspi3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0204>;
-	};
-
-	icr_ick: icr_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0410>;
-	};
-
-	i2chs1_fck: i2chs1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,omap2430-interface-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0204>;
-	};
-
-	i2chs2_fck: i2chs2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,omap2430-interface-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0204>;
-	};
-
-	usbhs_ick: usbhs_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0214>;
-	};
-
-	mmchs1_ick: mmchs1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0214>;
-	};
-
-	mmchs1_fck: mmchs1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0204>;
-	};
-
-	mmchs2_ick: mmchs2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0214>;
-	};
-
-	mmchs2_fck: mmchs2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0204>;
-	};
-
-	gpio5_ick: gpio5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0214>;
-	};
-
-	gpio5_fck: gpio5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0204>;
-	};
-
-	mdm_intc_ick: mdm_intc_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0214>;
-	};
-
-	mmchsdb1_fck: mmchsdb1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x0204>;
-	};
-
-	mmchsdb2_fck: mmchsdb2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <17>;
-		reg = <0x0204>;
-	};
-};
-
-&prcm_clockdomains {
-	gfx_clkdm: gfx_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gfx_ick>;
-	};
-
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
-			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
-			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>,
-			 <&icr_ick>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_ick>, <&dss_54m_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
-			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
-			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
-			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
-			 <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>,
-			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
-			 <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>,
-			 <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>,
-			 <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>,
-			 <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>,
-			 <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>,
-			 <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>,
-			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
-			 <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>,
-			 <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>,
-			 <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>,
-			 <&mmchsdb2_fck>;
-	};
-
-	mdm_clkdm: mdm_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mdm_osc_ck>;
-	};
-};
-
-&func_96m_ck {
-	compatible = "ti,mux-clock";
-	clocks = <&apll96_ck>, <&alt_ck>;
-	ti,bit-shift = <4>;
-	reg = <0x0540>;
-};
-
-&dsp_div_fck {
-	ti,max-div = <4>;
-	ti,index-starts-at-one;
-};
-
-&ssi_ssr_sst_div_fck {
-	ti,max-div = <5>;
-	ti,index-starts-at-one;
-};
diff --git a/src/arm/omap2430-sdp.dts b/src/arm/omap2430-sdp.dts
deleted file mode 100644
index 2c90d29b4cad..000000000000
--- a/src/arm/omap2430-sdp.dts
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap2430.dtsi"
-
-/ {
-	model = "TI OMAP2430 SDP";
-	compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128 MB */
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	};
-};
-
-#include "twl4030.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-};
-
-&gpmc {
-	ranges = <5 0 0x08000000 0x01000000>;
-	ethernet@gpmc {
-		compatible = "smsc,lan91c94";
-		interrupt-parent = <&gpio5>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;	/* gpio149 */
-		reg = <5 0x300 0xf>;
-		bank-width = <2>;
-		gpmc,mux-add-data;
-        };
-};
-
diff --git a/src/arm/omap2430.dtsi b/src/arm/omap2430.dtsi
deleted file mode 100644
index 1a00f15d9096..000000000000
--- a/src/arm/omap2430.dtsi
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Device Tree Source for OMAP243x SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap2.dtsi"
-
-/ {
-	compatible = "ti,omap2430", "ti,omap2";
-
-	ocp {
-		prcm: prcm@49006000 {
-			compatible = "ti,omap2-prcm";
-			reg = <0x49006000 0x1000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@49002000 {
-			compatible = "ti,omap2-scrm";
-			reg = <0x49002000 0x1000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@49020000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x49020000 0x20>;
-			ti,hwmods = "counter_32k";
-		};
-
-		omap2430_pmx: pinmux@49002030 {
-			compatible = "ti,omap2430-padconf", "pinctrl-single";
-			reg = <0x49002030 0x0154>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <8>;
-			pinctrl-single,function-mask = <0x3f>;
-		};
-
-		omap2_scm_general: tisyscon@49002270 {
-			compatible = "syscon";
-			reg = <0x49002270 0x240>;
-		};
-
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0x230 0x4>;
-			syscon = <&omap2_scm_general>;
-			pbias_mmc_reg: pbias_mmc_omap2430 {
-				regulator-name = "pbias_mmc_omap2430";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
-		gpio1: gpio@4900c000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4900c000 0x200>;
-			interrupts = <29>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio2: gpio@4900e000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x4900e000 0x200>;
-			interrupts = <30>;
-			ti,hwmods = "gpio2";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio3: gpio@49010000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x49010000 0x200>;
-			interrupts = <31>;
-			ti,hwmods = "gpio3";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio4: gpio@49012000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x49012000 0x200>;
-			interrupts = <32>;
-			ti,hwmods = "gpio4";
-			ti,gpio-always-on;
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpio5: gpio@480b6000 {
-			compatible = "ti,omap2-gpio";
-			reg = <0x480b6000 0x200>;
-			interrupts = <33>;
-			ti,hwmods = "gpio5";
-			#gpio-cells = <2>;
-			gpio-controller;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-		};
-
-		gpmc: gpmc@6e000000 {
-			compatible = "ti,omap2430-gpmc";
-			reg = <0x6e000000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <20>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-		};
-
-		mcbsp1: mcbsp@48074000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x48074000 0xff>;
-			reg-names = "mpu";
-			interrupts = <64>, /* OCP compliant interrupt */
-				     <59>, /* TX interrupt */
-				     <60>, /* RX interrupt */
-				     <61>; /* RX overflow interrupt */
-			interrupt-names = "common", "tx", "rx", "rx_overflow";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@48076000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x48076000 0xff>;
-			reg-names = "mpu";
-			interrupts = <16>, /* OCP compliant interrupt */
-				     <62>, /* TX interrupt */
-				     <63>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp2";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp3: mcbsp@4808c000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x4808c000 0xff>;
-			reg-names = "mpu";
-			interrupts = <17>, /* OCP compliant interrupt */
-				     <89>, /* TX interrupt */
-				     <90>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3";
-			dmas = <&sdma 17>,
-			       <&sdma 18>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp4: mcbsp@4808e000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x4808e000 0xff>;
-			reg-names = "mpu";
-			interrupts = <18>, /* OCP compliant interrupt */
-				     <54>, /* TX interrupt */
-				     <55>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp4";
-			dmas = <&sdma 19>,
-			       <&sdma 20>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp5: mcbsp@48096000 {
-			compatible = "ti,omap2430-mcbsp";
-			reg = <0x48096000 0xff>;
-			reg-names = "mpu";
-			interrupts = <19>, /* OCP compliant interrupt */
-				     <81>, /* TX interrupt */
-				     <82>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp5";
-			dmas = <&sdma 21>,
-			       <&sdma 22>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap2-hsmmc";
-			reg = <0x4809c000 0x200>;
-			interrupts = <83>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap2-hsmmc";
-			reg = <0x480b4000 0x200>;
-			interrupts = <86>;
-			ti,hwmods = "mmc2";
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap2-mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <6>;
-		};
-
-		timer1: timer@49018000 {
-			compatible = "ti,omap2420-timer";
-			reg = <0x49018000 0x400>;
-			interrupts = <37>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		mcspi3: mcspi@480b8000 {
-			compatible = "ti,omap2-mcspi";
-			ti,hwmods = "mcspi3";
-			reg = <0x480b8000 0x100>;
-			interrupts = <91>;
-			dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		usb_otg_hs: usb_otg_hs@480ac000 {
-			compatible = "ti,omap2-musb";
-			ti,hwmods = "usb_otg_hs";
-			reg = <0x480ac000 0x1000>;
-			interrupts = <93>;
-		};
-
-		wd_timer2: wdt@49016000 {
-			compatible = "ti,omap2-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x49016000 0x80>;
-		};
-	};
-};
-
-&i2c1 {
-	compatible = "ti,omap2430-i2c";
-};
-
-&i2c2 {
-	compatible = "ti,omap2430-i2c";
-};
-
-/include/ "omap24xx-clocks.dtsi"
-/include/ "omap2430-clocks.dtsi"
diff --git a/src/arm/omap24xx-clocks.dtsi b/src/arm/omap24xx-clocks.dtsi
deleted file mode 100644
index a1365ca926eb..000000000000
--- a/src/arm/omap24xx-clocks.dtsi
+++ /dev/null
@@ -1,1244 +0,0 @@
-/*
- * Device Tree Source for OMAP24xx clock data
- *
- * Copyright (C) 2014 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&scrm_clocks {
-	mcbsp1_mux_fck: mcbsp1_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x0274>;
-	};
-
-	mcbsp1_fck: mcbsp1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
-	};
-
-	mcbsp2_mux_fck: mcbsp2_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_96m_ck>, <&mcbsp_clks>;
-		ti,bit-shift = <6>;
-		reg = <0x0274>;
-	};
-
-	mcbsp2_fck: mcbsp2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
-	};
-};
-
-&prcm_clocks {
-	func_32k_ck: func_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	secure_32k_ck: secure_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12m_ck: virt_12m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13m_ck: virt_13m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26m_ck: virt_26m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	aplls_clkin_ck: aplls_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x0540>;
-	};
-
-	aplls_clkin_x2_ck: aplls_clkin_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&aplls_clkin_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	osc_ck: osc_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0060>;
-		ti,index-starts-at-one;
-	};
-
-	sys_ck: sys_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&osc_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x0060>;
-		ti,index-starts-at-one;
-	};
-
-	alt_ck: alt_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <54000000>;
-	};
-
-	mcbsp_clks: mcbsp_clks {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	dpll_ck: dpll_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap2-dpll-core-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0500>, <0x0540>;
-	};
-
-	apll96_ck: apll96_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap2-apll-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <2>;
-		ti,idlest-shift = <8>;
-		ti,clock-frequency = <96000000>;
-		reg = <0x0500>, <0x0530>, <0x0520>;
-	};
-
-	apll54_ck: apll54_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap2-apll-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		ti,idlest-shift = <9>;
-		ti,clock-frequency = <54000000>;
-		reg = <0x0500>, <0x0530>, <0x0520>;
-	};
-
-	func_54m_ck: func_54m_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&apll54_ck>, <&alt_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0540>;
-	};
-
-	core_ck: core_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	func_96m_ck: func_96m_ck {
-		#clock-cells = <0>;
-	};
-
-	apll96_d2_ck: apll96_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll96_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_48m_ck: func_48m_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&apll96_d2_ck>, <&alt_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0540>;
-	};
-
-	func_12m_ck: func_12m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&func_48m_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	sys_clkout_src_gate: sys_clkout_src_gate {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout_src_mux: sys_clkout_src_mux {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
-		reg = <0x0070>;
-	};
-
-	sys_clkout_src: sys_clkout_src {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
-	};
-
-	sys_clkout: sys_clkout {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkout_src>;
-		ti,bit-shift = <3>;
-		ti,max-div = <64>;
-		reg = <0x0070>;
-		ti,index-power-of-two;
-	};
-
-	emul_ck: emul_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_54m_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0078>;
-	};
-
-	mpu_ck: mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <31>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-	};
-
-	dsp_gate_fck: dsp_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0800>;
-	};
-
-	dsp_div_fck: dsp_div_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		reg = <0x0840>;
-	};
-
-	dsp_fck: dsp_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
-	};
-
-	core_l3_ck: core_l3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <31>;
-		reg = <0x0240>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_3d_gate_fck: gfx_3d_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0300>;
-	};
-
-	gfx_3d_div_fck: gfx_3d_div_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,max-div = <4>;
-		reg = <0x0340>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_3d_fck: gfx_3d_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
-	};
-
-	gfx_2d_gate_fck: gfx_2d_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0300>;
-	};
-
-	gfx_2d_div_fck: gfx_2d_div_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,max-div = <4>;
-		reg = <0x0340>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_2d_fck: gfx_2d_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
-	};
-
-	gfx_ick: gfx_ick {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0310>;
-	};
-
-	l4_ck: l4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <5>;
-		ti,max-div = <3>;
-		reg = <0x0240>;
-		ti,index-starts-at-one;
-	};
-
-	dss_ick: dss_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0210>;
-	};
-
-	dss1_gate_fck: dss1_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0200>;
-	};
-
-	core_d2_ck: core_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	core_d3_ck: core_d3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	core_d4_ck: core_d4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	core_d5_ck: core_d5_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <5>;
-	};
-
-	core_d6_ck: core_d6_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <6>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	core_d8_ck: core_d8_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	core_d9_ck: core_d9_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <9>;
-	};
-
-	core_d12_ck: core_d12_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <12>;
-	};
-
-	core_d16_ck: core_d16_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	dss1_mux_fck: dss1_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0240>;
-	};
-
-	dss1_fck: dss1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
-	};
-
-	dss2_gate_fck: dss2_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0200>;
-	};
-
-	dss2_mux_fck: dss2_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&func_48m_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x0240>;
-	};
-
-	dss2_fck: dss2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
-	};
-
-	dss_54m_fck: dss_54m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_54m_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0200>;
-	};
-
-	ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0204>;
-	};
-
-	ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0240>;
-	};
-
-	ssi_ssr_sst_fck: ssi_ssr_sst_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
-	};
-
-	usb_l4_gate_ick: usb_l4_gate_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0214>;
-	};
-
-	usb_l4_div_ick: usb_l4_div_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&core_l3_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x0240>;
-		ti,dividers = <0>, <1>, <2>, <0>, <4>;
-	};
-
-	usb_l4_ick: usb_l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0214>;
-	};
-
-	gpt1_ick: gpt1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0410>;
-	};
-
-	gpt1_gate_fck: gpt1_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0400>;
-	};
-
-	gpt1_mux_fck: gpt1_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		reg = <0x0440>;
-	};
-
-	gpt1_fck: gpt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
-	};
-
-	gpt2_ick: gpt2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0210>;
-	};
-
-	gpt2_gate_fck: gpt2_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0200>;
-	};
-
-	gpt2_mux_fck: gpt2_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0244>;
-	};
-
-	gpt2_fck: gpt2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
-	};
-
-	gpt3_ick: gpt3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0210>;
-	};
-
-	gpt3_gate_fck: gpt3_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0200>;
-	};
-
-	gpt3_mux_fck: gpt3_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0244>;
-	};
-
-	gpt3_fck: gpt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
-	};
-
-	gpt4_ick: gpt4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0210>;
-	};
-
-	gpt4_gate_fck: gpt4_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0200>;
-	};
-
-	gpt4_mux_fck: gpt4_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0244>;
-	};
-
-	gpt4_fck: gpt4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
-	};
-
-	gpt5_ick: gpt5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0210>;
-	};
-
-	gpt5_gate_fck: gpt5_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0200>;
-	};
-
-	gpt5_mux_fck: gpt5_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0244>;
-	};
-
-	gpt5_fck: gpt5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
-	};
-
-	gpt6_ick: gpt6_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0210>;
-	};
-
-	gpt6_gate_fck: gpt6_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0200>;
-	};
-
-	gpt6_mux_fck: gpt6_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0244>;
-	};
-
-	gpt6_fck: gpt6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
-	};
-
-	gpt7_ick: gpt7_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0210>;
-	};
-
-	gpt7_gate_fck: gpt7_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0200>;
-	};
-
-	gpt7_mux_fck: gpt7_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0244>;
-	};
-
-	gpt7_fck: gpt7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
-	};
-
-	gpt8_ick: gpt8_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0210>;
-	};
-
-	gpt8_gate_fck: gpt8_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0200>;
-	};
-
-	gpt8_mux_fck: gpt8_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x0244>;
-	};
-
-	gpt8_fck: gpt8_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
-	};
-
-	gpt9_ick: gpt9_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0210>;
-	};
-
-	gpt9_gate_fck: gpt9_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0200>;
-	};
-
-	gpt9_mux_fck: gpt9_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x0244>;
-	};
-
-	gpt9_fck: gpt9_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
-	};
-
-	gpt10_ick: gpt10_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0210>;
-	};
-
-	gpt10_gate_fck: gpt10_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0200>;
-	};
-
-	gpt10_mux_fck: gpt10_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0244>;
-	};
-
-	gpt10_fck: gpt10_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
-	};
-
-	gpt11_ick: gpt11_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x0210>;
-	};
-
-	gpt11_gate_fck: gpt11_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x0200>;
-	};
-
-	gpt11_mux_fck: gpt11_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0244>;
-	};
-
-	gpt11_fck: gpt11_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
-	};
-
-	gpt12_ick: gpt12_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x0210>;
-	};
-
-	gpt12_gate_fck: gpt12_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x0200>;
-	};
-
-	gpt12_mux_fck: gpt12_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0244>;
-	};
-
-	gpt12_fck: gpt12_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
-	};
-
-	mcbsp1_ick: mcbsp1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <15>;
-		reg = <0x0210>;
-	};
-
-	mcbsp1_gate_fck: mcbsp1_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <15>;
-		reg = <0x0200>;
-	};
-
-	mcbsp2_ick: mcbsp2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <16>;
-		reg = <0x0210>;
-	};
-
-	mcbsp2_gate_fck: mcbsp2_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <16>;
-		reg = <0x0200>;
-	};
-
-	mcspi1_ick: mcspi1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <17>;
-		reg = <0x0210>;
-	};
-
-	mcspi1_fck: mcspi1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <17>;
-		reg = <0x0200>;
-	};
-
-	mcspi2_ick: mcspi2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0210>;
-	};
-
-	mcspi2_fck: mcspi2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0200>;
-	};
-
-	uart1_ick: uart1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <21>;
-		reg = <0x0210>;
-	};
-
-	uart1_fck: uart1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <21>;
-		reg = <0x0200>;
-	};
-
-	uart2_ick: uart2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0210>;
-	};
-
-	uart2_fck: uart2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0200>;
-	};
-
-	uart3_ick: uart3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0214>;
-	};
-
-	uart3_fck: uart3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0204>;
-	};
-
-	gpios_ick: gpios_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0410>;
-	};
-
-	gpios_fck: gpios_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0400>;
-	};
-
-	mpu_wdt_ick: mpu_wdt_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0410>;
-	};
-
-	mpu_wdt_fck: mpu_wdt_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0400>;
-	};
-
-	sync_32k_ick: sync_32k_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0410>;
-	};
-
-	wdt1_ick: wdt1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x0410>;
-	};
-
-	omapctrl_ick: omapctrl_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x0410>;
-	};
-
-	cam_fck: cam_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0200>;
-	};
-
-	cam_ick: cam_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0210>;
-	};
-
-	mailboxes_ick: mailboxes_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <30>;
-		reg = <0x0210>;
-	};
-
-	wdt4_ick: wdt4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0210>;
-	};
-
-	wdt4_fck: wdt4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_32k_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0200>;
-	};
-
-	mspro_ick: mspro_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x0210>;
-	};
-
-	mspro_fck: mspro_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_96m_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x0200>;
-	};
-
-	fac_ick: fac_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x0210>;
-	};
-
-	fac_fck: fac_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x0200>;
-	};
-
-	hdq_ick: hdq_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x0210>;
-	};
-
-	hdq_fck: hdq_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_12m_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x0200>;
-	};
-
-	i2c1_ick: i2c1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0210>;
-	};
-
-	i2c2_ick: i2c2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0210>;
-	};
-
-	gpmc_fck: gpmc_fck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <1>;
-		reg = <0x0238>;
-		ti,clock-mult = <1>;
-	};
-
-	sdma_fck: sdma_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sdma_ick: sdma_ick {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <0>;
-		reg = <0x0238>;
-		ti,clock-mult = <1>;
-	};
-
-	sdrc_ick: sdrc_ick {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&core_l3_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <2>;
-		reg = <0x0238>;
-		ti,clock-mult = <1>;
-	};
-
-	des_ick: des_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x021c>;
-	};
-
-	sha_ick: sha_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x021c>;
-	};
-
-	rng_ick: rng_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x021c>;
-	};
-
-	aes_ick: aes_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x021c>;
-	};
-
-	pka_ick: pka_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l4_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x021c>;
-	};
-
-	usb_fck: usb_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&func_48m_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0204>;
-	};
-};
diff --git a/src/arm/omap3-beagle-xm-ab.dts b/src/arm/omap3-beagle-xm-ab.dts
deleted file mode 100644
index 7ac3bcf59d59..000000000000
--- a/src/arm/omap3-beagle-xm-ab.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap3-beagle-xm.dts"
-
-/ {
-	/* HS USB Port 2 Power enable was inverted with the xM C */
-	hsusb2_power: hsusb2_power_reg {
-		enable-active-high;
-	};
-};
diff --git a/src/arm/omap3-beagle-xm.dts b/src/arm/omap3-beagle-xm.dts
deleted file mode 100644
index 1becefce821b..000000000000
--- a/src/arm/omap3-beagle-xm.dts
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
-	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &tv0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			label = "beagleboard::usr0";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
-			linux,default-trigger = "heartbeat";
-		};
-
-		mmc {
-			label = "beagleboard::usr1";
-			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		pmu_stat {
-			label = "beagleboard::pmu_stat";
-			pwms = <&twl_pwmled 1 7812500>;
-			max-brightness = <127>;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3beagle";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		user {
-			label = "user";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x114>;
-			gpio-key,wakeup;
-		};
-
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
-		vcc-supply = <&hsusb2_power>;
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
-
-		/* XXX pinctrl from twl */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tv0: connector@1 {
-		compatible = "svideo-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-};
-
-&omap3_pmx_wkup {
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
-		>;
-	};
-
-	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
-		pinctrl-single,pins = <
-			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
-		>;
-	};
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-
-		twl_power: power {
-			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
-			ti,use_poweroff;
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/* pullups: BIT(1) */
-	ti,pullups = <0x000002>;
-	/*
-	 * pulldowns:
-	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
-	 * BIT(15), BIT(16), BIT(17)
-	 */
-	ti,pulldowns = <0x03a1c4>;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&vaux2 {
-	regulator-name = "usb_1v8";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&dss_dpi_pins1
-		&dss_dpi_pins2
-	>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&venc {
-	status = "ok";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <2>;
-		};
-	};
-};
diff --git a/src/arm/omap3-beagle.dts b/src/arm/omap3-beagle.dts
deleted file mode 100644
index 3c3e6da1deac..000000000000
--- a/src/arm/omap3-beagle.dts
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TI OMAP3 BeagleBoard";
-	compatible = "ti,omap3-beagle", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &tv0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pmu_stat {
-			label = "beagleboard::pmu_stat";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
-		};
-
-		heartbeat {
-			label = "beagleboard::usr0";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
-			linux,default-trigger = "heartbeat";
-		};
-
-		mmc {
-			label = "beagleboard::usr1";
-			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
-		vcc-supply = <&hsusb2_power>;
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "omap3beagle";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		user {
-			label = "user";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x114>;
-			gpio-key,wakeup;
-		};
-
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tfp410_pins>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tv0: connector@1 {
-		compatible = "svideo-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-};
-
-&omap3_pmx_wkup {
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			0x194 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/* pullups: BIT(1) */
-	ti,pullups = <0x000002>;
-	/*
-	 * pulldowns:
-	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
-	 * BIT(15), BIT(16), BIT(17)
-	 */
-	ti,pulldowns = <0x03a1c4>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&vaux2 {
-	regulator-name = "vdd_ehci";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&venc {
-	status = "ok";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <2>;
-		};
-	};
-};
diff --git a/src/arm/omap3-cm-t3517.dts b/src/arm/omap3-cm-t3517.dts
deleted file mode 100644
index d00502f4fd9b..000000000000
--- a/src/arm/omap3-cm-t3517.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Support for CompuLab CM-T3517
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-#include "omap3-cm-t3x.dtsi"
-
-/ {
-	model = "CompuLab CM-T3517";
-	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
-
-	vmmc:  regulator-vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
-
-	wl12xx_vmmc2: wl12xx_vmmc2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vw1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-				&wl12xx_wkup_pins
-				&wl12xx_core_pins
-			    >;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
-		startup-delay-us = <20000>;
-		enable-active-high;
-	};
-
-	wl12xx_vaux2: wl12xx_vaux2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271_vaux2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-};
-
-&omap3_pmx_wkup {
-
-	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
-			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4)	/* sys_boot4.gpio_6 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-
-	phy1_reset_pins: pinmux_hsusb1_phy_reset_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4)	/* uart2_tx.gpio_146 */
-		>;
-	};
-
-	phy2_reset_pins: pinmux_hsusb2_phy_reset_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4)	/* uart2_rx.gpio_147 */
-		>;
-	};
-
-	otg_drv_vbus: pinmux_otg_drv_vbus {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	wl12xx_core_pins: pinmux_wl12xx_core_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs5.gpio_56 */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart2_rts.gpio_145 */
-		>;
-	};
-
-	usb_hub_pins: pinmux_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 - USB HUB RST */
-		>;
-	};
-};
-
-&hsusb1_phy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&phy1_reset_pins>;
-	reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
-};
-
-&hsusb2_phy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&phy2_reset_pins>;
-	reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
-};
-
-&davinci_emac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&am35x_otg_hs {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&otg_drv_vbus>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&wl12xx_vmmc2>;
-	vmmc_aux-supply = <&wl12xx_vaux2>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
diff --git a/src/arm/omap3-cm-t3530.dts b/src/arm/omap3-cm-t3530.dts
deleted file mode 100644
index d1458496520e..000000000000
--- a/src/arm/omap3-cm-t3530.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Support for CompuLab CM-T3530
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "omap3-cm-t3x30.dtsi"
-
-/ {
-	model = "CompuLab CM-T3530";
-	compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
-
-	/* Regulator to trigger the reset signal of the Wifi module */
-	mmc2_sdio_reset: regulator-mmc2-sdio-reset {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-mmc2-sdio-reset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat4.sdmmc2_dir_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat5.sdmmc2_dir_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat6.sdmmc2_dir_cmd */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
-		>;
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&mmc2_sdio_reset>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
diff --git a/src/arm/omap3-cm-t3730.dts b/src/arm/omap3-cm-t3730.dts
deleted file mode 100644
index b3f9a50b3bc8..000000000000
--- a/src/arm/omap3-cm-t3730.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Support for CompuLab CM-T3730
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap3-cm-t3x30.dtsi"
-
-/ {
-	model = "CompuLab CM-T3730";
-	compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
-
-	wl12xx_vmmc2: wl12xx_vmmc2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vw1271";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;   /* gpio73 */
-		startup-delay-us = <20000>;
-		enable-active-high;
-	};
-
-	wl12xx_vaux2: wl12xx_vaux2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271_vaux2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vaux2>;
-	};
-};
-
-&omap3_pmx_core {
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)	/* dss_data3.gpio_73 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 */
-		>;
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&wl12xx_vmmc2>;
-	vmmc_aux-supply = <&wl12xx_vaux2>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
diff --git a/src/arm/omap3-cm-t3x.dtsi b/src/arm/omap3-cm-t3x.dtsi
deleted file mode 100644
index c671a2299ea8..000000000000
--- a/src/arm/omap3-cm-t3x.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Common support for CompuLab CM-T3x CoMs
- */
-
-/ {
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&green_led_pins>;
-		ledb {
-			label = "cm-t3x:green";
-			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	/* HS USB Port 1 Power */
-	hsusb1_power: hsusb1_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&hsusb1_power>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&hsusb2_power>;
-	};
-};
-
-&omap3_pmx_core {
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	green_led_pins: pinmux_green_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
-		>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	bus-width = <4>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-&usbhshost {
-	port1-mode = "ehci-phy";
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy &hsusb2_phy>;
-};
diff --git a/src/arm/omap3-cm-t3x30.dtsi b/src/arm/omap3-cm-t3x30.dtsi
deleted file mode 100644
index 25ba08331d88..000000000000
--- a/src/arm/omap3-cm-t3x30.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Common support for CompuLab CM-T3x30 CoMs
- */
-
-#include "omap3-cm-t3x.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-};
-
-&omap3_pmx_core {
-
-	smsc1_pins: pinmux_smsc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs5.gpmc_ncs5 */
-			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
-		>;
-	};
-
- 	hsusb0_pins: pinmux_hsusb0_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-		>;
-	};
-};
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x01000000>;
-
-	smsc1: ethernet@gpmc {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc1_pins>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		reg = <5 0 0xff>;
-	};
-};
-
-&i2c1 {
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-	/* pullups: BIT(0) */
-	ti,pullups = <0x000001>;
-};
-
-&hsusb1_phy {
-	reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
-};
-
-&hsusb2_phy {
-	reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb0_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/src/arm/omap3-devkit8000.dts b/src/arm/omap3-devkit8000.dts
deleted file mode 100644
index da402f0fdab4..000000000000
--- a/src/arm/omap3-devkit8000.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Author: Anil Kumar <anilk4.v@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-/ {
-	model = "TimLL OMAP3 Devkit8000";
-	compatible = "timll,omap3-devkit8000", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		heartbeat {
-			label = "devkit8000::led1";
-			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		mmc {
-			label = "devkit8000::led2";
-			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
-			default-state = "on";
-			linux,default-trigger = "none";
-		};
-
-		usr {
-			label = "devkit8000::led3";
-			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
-			default-state = "on";
-			linux,default-trigger = "usr";
-                };
-
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "devkit8000";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-		ti,audio-routing =
-			"Ext Spk", "PREDRIVEL",
-			"Ext Spk", "PREDRIVER",
-			"MAINMIC", "Main Mic",
-			"Main Mic", "Mic Bias 1";
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-&i2c2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	status = "disabled";
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&wdt2 {
-	status = "disabled";
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x04>;       /* CS0: NAND */
-
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		nand-bus-width = <16>;
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		x-loader@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-
-		bootloaders@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		bootloaders_env@260000 {
-			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
-		};
-
-		kernel@280000 {
-			label = "Kernel";
-			reg = <0x280000 0x400000>;
-		};
-
-		filesystem@680000 {
-			label = "File System";
-			reg = <0x680000 0xf980000>;
-		};
-	};
-};
diff --git a/src/arm/omap3-evm-37xx.dts b/src/arm/omap3-evm-37xx.dts
deleted file mode 100644
index a8bd4349c7d2..000000000000
--- a/src/arm/omap3-evm-37xx.dts
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap3-evm-common.dtsi"
-
-
-/ {
-	model = "TI OMAP37XX EVM (TMDSEVM3730)";
-	compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-	};
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&dss_dpi_pins1
-		&dss_dpi_pins2
-	>;
-};
-
-&omap3_pmx_core {
-	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
-			0x120 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
-			0x122 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
-			0x124 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
-			0x126 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
-		>;
-	};
-
-	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x150 (PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
-			0x14e (PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
-		>;
-	};
-
-	smsc911x_pins: pinmux_smsc911x_pins {
-		pinctrl-single,pins = <
-			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
-		pinctrl-single,pins = <
-			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart1 {
-	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
-};
-
-&uart2 {
-	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&gpmc {
-	ranges = <0 0 0x00000000 0x20000000>,
-		 <5 0 0x2c000000 0x01000000>;
-
-	nand@0,0 {
-		linux,mtd-name= "hynix,h8kds0un0mer-4em";
-		reg = <0 0 0>;
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@0x80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x1c0000>;
-		};
-		partition@0x1c0000 {
-			label = "Environment";
-			reg = <0x240000 0x40000>;
-		};
-		partition@0x280000 {
-			label = "Kernel";
-			reg = <0x280000 0x500000>;
-		};
-		partition@0x780000 {
-			label = "Filesystem";
-			reg = <0x780000 0x1f880000>;
-		};
-	};
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc911x_pins>;
-	};
-};
diff --git a/src/arm/omap3-evm-common.dtsi b/src/arm/omap3-evm-common.dtsi
deleted file mode 100644
index c8747c7f1cc8..000000000000
--- a/src/arm/omap3-evm-common.dtsi
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Common support for omap3 EVM boards
- */
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		ledb {
-			label = "omap3evm::ledb";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 22 0>;	/* gpio150 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		vin-supply = <&vmmc2>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-#include "omap3-panel-sharp-ls037v7dw01.dtsi"
-
-&backlight0 {
-	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
-};
-
-&twl {
-	twl_power: power {
-		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
-		ti,use_poweroff;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&lcd_3v3 {
-	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
-	enable-active-low;
-};
-
-&lcd0 {
-	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
-	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
-	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
-		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
-		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 0>;		/* gpio175 */
-		pendown-gpio = <&gpio6 15 0>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&gpmc {
-	ethernet@gpmc {
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 8>;
-		reg = <5 0 0xff>;
-	};
-};
diff --git a/src/arm/omap3-evm.dts b/src/arm/omap3-evm.dts
deleted file mode 100644
index e10dcd0fa539..000000000000
--- a/src/arm/omap3-evm.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "omap3-evm-common.dtsi"
-
-/ {
-	model = "TI OMAP35XX EVM (TMDSEVM3530)";
-	compatible = "ti,omap3-evm", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-};
diff --git a/src/arm/omap3-gta04.dts b/src/arm/omap3-gta04.dts
deleted file mode 100644
index 021311f7964b..000000000000
--- a/src/arm/omap3-gta04.dts
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
- *
- * Based on omap3-beagle-xm.dts
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
-	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		aux-button {
-			label = "aux";
-			linux,code = <169>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "gta04";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	spi_lcd {
-		compatible = "spi-gpio";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi_gpio_pins>;
-
-		gpio-sck = <&gpio1 12 0>;
-		gpio-miso = <&gpio1 18 0>;
-		gpio-mosi = <&gpio1 20 0>;
-		cs-gpios = <&gpio1 19 0>;
-		num-chipselects = <1>;
-
-		/* lcd panel */
-		lcd: td028ttec1@0 {
-			compatible = "toppoly,td028ttec1";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-
-			label = "lcd";
-			port {
-				lcd_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-		};
-	};
-};
-
-&omap3_pmx_core {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
-			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-               pinctrl-single,pins = <
-                       0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-                       0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-                       0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-                       0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-                       0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-                       0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-                       0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-                       0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-                       0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-                       0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-                       0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-                       0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-                       0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-                       0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-                       0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-                       0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-                       0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-                       0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-                       0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-                       0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-                       0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-                       0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-                       0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-                       0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-                       0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-                       0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-                       0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-                       0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-               >;
-       };
-
-	spi_gpio_pins: spi_gpio_pinmux {
-		pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */
-			0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */
-			0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */
-			0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-
-	twl_audio: audio {
-		compatible = "ti,twl4030-audio";
-		codec {
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-
-	/* pressure sensor */
-	bmp085@77 {
-		compatible = "bosch,bmp085";
-		reg = <0x77>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	/* accelerometer */
-	bma180@41 {
-		compatible = "bosch,bma180";
-		reg = <0x41>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* leds */
-	tca6507@45 {
-		compatible = "ti,tca6507";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x45>;
-
-		gta04_led0: red_aux@0 {
-			label = "gta04:red:aux";
-			reg = <0x0>;
-		};
-
-		gta04_led1: green_aux@1 {
-			label = "gta04:green:aux";
-			reg = <0x1>;
-		};
-
-		gta04_led3: red_power@3 {
-			label = "gta04:red:power";
-			reg = <0x3>;
-			linux,default-trigger = "default-on";
-		};
-
-		gta04_led4: green_power@4 {
-			label = "gta04:green:power";
-			reg = <0x4>;
-		};
-	};
-
-	/* compass aka magnetometer */
-	hmc5843@1e {
-		compatible = "honeywell,hmc5843";
-		reg = <0x1e>;
-	};
-
-	/* touchscreen */
-	tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = <600>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc2 {
-	vmmc-supply = <&vaux4>;
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&charger {
-	bb_uvolt = <3200000>;
-	bb_uamp = <150>;
-};
-
-&vaux4 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3150000>;
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = < &dss_dpi_pins >;
-
-	status = "okay";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/src/arm/omap3-igep.dtsi b/src/arm/omap3-igep.dtsi
deleted file mode 100644
index e2d163bf0619..000000000000
--- a/src/arm/omap3-igep.dtsi
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Common device tree for IGEP boards based on AM/DM37x
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "igep2";
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	vdd33: regulator-vdd33 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33";
-		regulator-always-on;
-	};
-
-	lbee1usjyc_vmmc: lbee1usjyc_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&lbee1usjyc_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbee1usjyc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 WIFI_PDN */
-		startup-delay-us = <10000>;
-		enable-active-high;
-		vin-supply = <&vdd33>;
-	};
-};
-
-&omap3_pmx_core {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
-			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
-		>;
-	};
-
-	/* WiFi/BT combo */
-	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
-		pinctrl-single,pins = <
-			0x136 (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 */
-			0x138 (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
-			0x13a (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
-			0x10e (PIN_INPUT | MUX_MODE0)		/* mcbsp2_clkx.mcbsp2_clkx */
-			0x110 (PIN_INPUT | MUX_MODE0)		/* mcbsp2_dr.mcbsp2.dr */
-			0x112 (PIN_OUTPUT | MUX_MODE0)		/* mcbsp2_dx.mcbsp2_dx */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	smsc9221_pins: pinmux_smsc9221_pins {
-		pinctrl-single,pins = <
-			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x18a (PIN_INPUT | MUX_MODE0)   /* i2c1_scl.i2c1_scl */
-			0x18c (PIN_INPUT | MUX_MODE0)   /* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0x18e (PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
-			0x190 (PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0x192 (PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
-			0x194 (PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			      };
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&mmc1 {
-      pinctrl-names = "default";
-      pinctrl-0 = <&mmc1_pins>;
-      vmmc-supply = <&vmmc1>;
-      vmmc_aux-supply = <&vsim>;
-      bus-width = <4>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&lbee1usjyc_vmmc>;
-	bus-width = <4>;
-	non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
diff --git a/src/arm/omap3-igep0020.dts b/src/arm/omap3-igep0020.dts
deleted file mode 100644
index b22caaaf774b..000000000000
--- a/src/arm/omap3-igep0020.dts
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
-
-/ {
-	model = "IGEPv2 (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-		compatible = "gpio-leds";
-
-		boot {
-			 label = "omap3:green:boot";
-			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			 default-state = "on";
-		};
-
-		user0 {
-			 label = "omap3:red:user0";
-			 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-			 default-state = "off";
-		};
-
-		user1 {
-			 label = "omap3:red:user1";
-			 gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-			 default-state = "off";
-		};
-
-		user2 {
-			label = "omap3:green:user1";
-			gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-       /* HS USB Port 1 Power */
-       hsusb1_power: hsusb1_power_reg {
-               compatible = "regulator-fixed";
-               regulator-name = "hsusb1_vbus";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
-               startup-delay-us = <70000>;
-       };
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
-		vcc-supply = <&hsusb1_power>;
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&tfp410_pins
-		&dss_dpi_pins
-	>;
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusbb1_pins
-	>;
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d8.hsusb1_dir */
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
-			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
-		>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in the EEPROM
-	 * as EDID data.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x00000000 0x20000000>,
-		 <5 0 0x2c000000 0x01000000>;
-
-	nand@0,0 {
-		linux,mtd-name= "micron,mt29c4g96maz";
-		reg = <0 0 0>;
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "SPL";
-			reg = <0 0x100000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x100000 0x180000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x280000 0x100000>;
-		};
-		partition@280000 {
-			label = "Kernel";
-			reg = <0x380000 0x300000>;
-		};
-		partition@780000 {
-			label = "Filesystem";
-			reg = <0x680000 0x1f980000>;
-		};
-	};
-
-	ethernet@gpmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc9221_pins>;
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
-&vpll2 {
-        /* Needed for DSS */
-        regulator-name = "vdds_dsi";
-};
-
-&dss {
-	status = "ok";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
diff --git a/src/arm/omap3-igep0030.dts b/src/arm/omap3-igep0030.dts
deleted file mode 100644
index 2793749eb1ba..000000000000
--- a/src/arm/omap3-igep0030.dts
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
- *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
- * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap3-igep.dtsi"
-
-/ {
-	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-		compatible = "gpio-leds";
-
-		boot {
-			 label = "omap3:green:boot";
-			 gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
-			 default-state = "on";
-		};
-
-		user0 {
-			 label = "omap3:red:user0";
-			 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
-			 default-state = "off";
-		};
-
-		user1 {
-			 label = "omap3:green:user1";
-			 gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
-			 default-state = "off";
-		};
-
-		user2 {
-			 label = "omap3:red:user1";
-			 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-			 default-state = "off";
-		};
-	};
-};
-
-&omap3_pmx_core2 {
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
-		>;
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
-
-	nand@0,0 {
-		linux,mtd-name= "micron,mt29c4g96maz";
-		reg = <0 0 0>;
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "SPL";
-			reg = <0 0x100000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x100000 0x180000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x280000 0x100000>;
-		};
-		partition@280000 {
-			label = "Kernel";
-			reg = <0x380000 0x300000>;
-		};
-		partition@780000 {
-			label = "Filesystem";
-			reg = <0x680000 0x1f980000>;
-		};
-	};
-};
diff --git a/src/arm/omap3-ldp.dts b/src/arm/omap3-ldp.dts
deleted file mode 100644
index af272c156e21..000000000000
--- a/src/arm/omap3-ldp.dts
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-#include "omap-gpmc-smsc911x.dtsi"
-
-/ {
-	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
-	compatible = "ti,omap3-ldp", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128 MB */
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins>;
-
-		key_enter {
-			label = "enter";
-			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
-			linux,code = <0x0107001c>; /* KEY_ENTER */
-			gpio-key,wakeup;
-		};
-
-		key_f1 {
-			label = "f1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
-			linux,code = <0x0303003b>; /* KEY_F1 */
-			gpio-key,wakeup;
-		};
-
-		key_f2 {
-			label = "f2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
-			linux,code = <0x0403003c>; /* KEY_F2 */
-			gpio-key,wakeup;
-		};
-
-		key_f3 {
-			label = "f3";
-			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
-			linux,code = <0x0503003d>; /* KEY_F3 */
-			gpio-key,wakeup;
-		};
-
-		key_f4 {
-			label = "f4";
-			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
-			linux,code = <0x0704003e>; /* KEY_F4 */
-			gpio-key,wakeup;
-		};
-
-		key_left {
-			label = "left";
-			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
-			linux,code = <0x04070069>; /* KEY_LEFT */
-			gpio-key,wakeup;
-		};
-
-		key_right {
-			label = "right";
-			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
-			linux,code = <0x0507006a>; /* KEY_RIGHT */
-			gpio-key,wakeup;
-		};
-
-		key_up {
-			label = "up";
-			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
-			linux,code = <0x06070067>; /* KEY_UP */
-			gpio-key,wakeup;
-		};
-
-		key_down {
-			label = "down";
-			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
-			linux,code = <0x0707006c>; /* KEY_DOWN */
-			gpio-key,wakeup;
-		};
-	};
-};
-
-&gpmc {
-	ranges = <0 0 0x00000000 0x01000000>,
-		 <1 0 0x08000000 0x01000000>;
-
-	nand@0,0 {
-		linux,mtd-name= "micron,nand";
-		reg = <0 0 0>;
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "X-Loader";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "U-Boot";
-			reg = <0x80000 0x140000>;
-		};
-		partition@1c0000 {
-			label = "Environment";
-			reg = <0x1c0000 0x40000>;
-		};
-		partition@200000 {
-			label = "Kernel";
-			reg = <0x200000 0x1e00000>;
-		};
-		partition@2000000 {
-			label = "Filesystem";
-			reg = <0x2000000 0xe000000>;
-		};
-	};
-
-	ethernet@gpmc {
-		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-		reg = <1 0 0xff>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-#include "omap3-panel-sharp-ls037v7dw01.dtsi"
-
-&backlight0 {
-	gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-/* tps61130rsa enabled by twl4030 regen */
-&lcd_3v3 {
-	regulator-always-on;
-};
-
-&lcd0 {
-	enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>;	/* lcd INI */
-	reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;	/* gpio55, lcd RESB */
-	mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;	/* gpio56, lcd MO */
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		interrupt-parent = <&gpio2>;
-		interrupts = <22 0>;		/* gpio54 */
-		pendown-gpio = <&gpio2 22 0>;
-	};
-};
-
-&mmc1 {
-	/* See 35xx errata 2.1.1.128 in SPRZ278F */
-	compatible = "ti,omap3-pre-es3-hsmmc";
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-
-&mmc2 {
-	status="disabled";
-};
-
-&mmc3 {
-	status="disabled";
-};
-
-&omap3_pmx_core {
-	gpio_key_pins: pinmux_gpio_key_pins {
-		pinctrl-single,pins = <
-			0xea (PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
-			0xec (PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
-			0xee (PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
-			0xf0 (PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
-			0xf2 (PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
-			0xf4 (PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
-			0xf6 (PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
-			0xf8 (PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
-			0xfa (PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
-		>;
-	};
-
-	musb_pins: pinmux_musb_pins {
-		pinctrl-single,pins = <
-			0x172 (PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			0x17a (PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			0x17c (PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			0x17e (PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			0x180 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			0x182 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			0x184 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			0x186 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			0x188 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-			0x176 (PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			0x178 (PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
-		>;
-	};
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&musb_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
-};
-
-&vaux1 {
-	/* Needed for ads7846 */
-        regulator-name = "vcc";
-};
diff --git a/src/arm/omap3-lilly-a83x.dtsi b/src/arm/omap3-lilly-a83x.dtsi
deleted file mode 100644
index d97308896f0c..000000000000
--- a/src/arm/omap3-lilly-a83x.dtsi
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include "omap36xx.dtsi"
-
-/ {
-	model = "INCOstartec LILLY-A83X module (DM3730)";
-	compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
-
-	chosen {
-			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>;   /* 128 MB */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "lilly-a83x::led1";
-			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "lilly-a83x";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	reg_vcc3: vcc3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_vcc3>;
-	};
-};
-
-&omap3_pmx_wkup {
-	pinctrl-names = "default";
-
-	lan9221_pins: pinmux_lan9221_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_129 */
-		>;
-	};
-
-	tsc2048_pins: pinmux_tsc2048_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4)   /* sys_boot6.gpio_8 */
-		>;
-	};
-
-	mmc1cd_pins: pinmux_mmc1cd_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_126 */
-		>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)   /* uart1_tx.uart1_tx */
-			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)   /* uart1_rts.uart1_rts */
-			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)    /* uart1_cts.uart1_cts */
-			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)    /* uart1_rx.uart1_rx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)   /* mcbsp3_clkx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)    /* mcbsp3_fsx.uart2_rx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)    /* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)   /* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
-		>;
-	};
-
-	hsusb1_pins: pinmux_hsusb1_pins {
-		pinctrl-single,pins = <
-
-			/* GPIO 182 controls USB-Hub reset. But USB-Phy its
-			 * reset can't be controlled. So we clamp this GPIO to
-			 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
-			 */
-
-			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcspi2_cs1.gpio_182 */
-		>;
-	};
-
-	hsusb_otg_pins: pinmux_hsusb_otg_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)   /* hsusb0_clk.hsusb0_clk */
-			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)  /* hsusb0_stp.hsusb0_stp */
-			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)   /* hsusb0_dir.hsusb0_dir */
-			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)   /* hsusb0_nxt.hsusb0_nxt */
-			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)   /* hsusb0_data0.hsusb0_data0 */
-			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)   /* hsusb0_data1.hsusb0_data1 */
-			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)   /* hsusb0_data2.hsusb0_data2 */
-			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)   /* hsusb0_data3.hsusb0_data3 */
-			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)   /* hsusb0_data4.hsusb0_data4 */
-			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)   /* hsusb0_data5.hsusb0_data5 */
-			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)   /* hsusb0_data6.hsusb0_data6 */
-			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)   /* hsusb0_data7.hsusb0_data7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	spi2_pins: pinmux_spi2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_clk.mcspi2_clk */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_simo.mcspi2_simo */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_somi.mcspi2_somi */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0)   /* mcspi2_cs0.mcspi2_cs0 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-
-	hsusb1_2_pins: pinmux_hsusb1_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)  /* etk_clk.hsusb1_stp */
-			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3)   /* etk_ctl.hsusb1_clk */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)   /* etk_d0.hsusb1_data0 */
-			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)   /* etk_d1.hsusb1_data1 */
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)   /* etk_d2.hsusb1_data2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)   /* etk_d3.hsusb1_data7 */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)   /* etk_d4.hsusb1_data4 */
-			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)   /* etk_d5.hsusb1_data5 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)   /* etk_d6.hsusb1_data6 */
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)   /* etk_d7.hsusb1_data3 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)   /* etk_d8.hsusb1_dir */
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)   /* etk_d9.hsusb1_nxt */
-		>;
-	};
-
-	gpio1_pins: pinmux_gpio1_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)   /* etk_d15.gpio_29 */
-		>;
-	};
-
-};
-
-&gpio1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio1_pins>;
-};
-
-&gpio6 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>;   /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&twl {
-	vmmc1: regulator-vmmc1 {
-		regulator-always-on;
-	};
-
-	vdd1: regulator-vdd1 {
-		regulator-always-on;
-	};
-
-	vdd2: regulator-vdd2 {
-		regulator-always-on;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <2600000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-};
-
-&i2c3 {
-	clock-frequency = <2600000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-		gpiom1: gpio@20 {
-			compatible = "mcp,mcp23017";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0x20>;
-		};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&mmc1 {
-	cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
-	cd-inverted;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
-	cap-sdio-irq;
-	cap-sd-highspeed;
-	cap-mmc-highspeed;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mcspi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins>;
-
-	tsc2046@0 {
-		reg = <0>;   /* CS0 */
-		compatible = "ti,tsc2046";
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 0>;   /* boot6 / gpio_8 */
-		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 0>;
-		vcc-supply = <&reg_vcc3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsc2048_pins>;
-
-		ti,x-min = <300>;
-		ti,x-max = <3000>;
-		ti,y-min = <600>;
-		ti,y-max = <3600>;
-		ti,x-plate-ohms = <80>;
-		ti,pressure-max = <255>;
-		ti,swap-xy;
-
-		linux,wakeup;
-	};
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
-&usbhshost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_2_pins>;
-	num-ports = <2>;
-	port1-mode = "ehci-phy";
-};
-
-&usb_otg_hs {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb_otg_pins>;
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&mcbsp2 {
-	status = "okay";
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>,
-		<7 0 0x15000000 0x01000000>;
-
-	nand@0,0 {
-		reg = <0 0 0x1000000>;
-		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
-		/* no elm on omap3 */
-
-		gpmc,mux-add-data = <0>;
-		gpmc,device-width = <2>;
-		gpmc,wait-pin = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,burst-length= <4>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <100>;
-		gpmc,cs-wr-off-ns = <100>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <100>;
-		gpmc,adv-wr-off-ns = <100>;
-		gpmc,oe-on-ns = <5>;
-		gpmc,oe-off-ns = <75>;
-		gpmc,we-on-ns = <5>;
-		gpmc,we-off-ns = <75>;
-		gpmc,rd-cycle-ns = <100>;
-		gpmc,wr-cycle-ns = <100>;
-		gpmc,access-ns = <60>;
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-delay-ns = <50>;
-		gpmc,wr-data-mux-bus-ns = <75>;
-		gpmc,wr-access-ns = <155>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "MLO";
-			reg = <0 0x80000>;
-		};
-
-		partition@0x80000 {
-			label = "u-boot";
-			reg = <0x80000 0x1e0000>;
-		};
-
-		partition@0x260000 {
-			label = "u-boot-environment";
-			reg = <0x260000 0x20000>;
-		};
-
-		partition@0x280000 {
-			label = "kernel";
-			reg = <0x280000 0x500000>;
-		};
-
-		partition@0x780000 {
-			label = "filesystem";
-			reg = <0x780000 0xf880000>;
-		};
-	};
-
-	ethernet@7,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		bank-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <60>;
-		gpmc,cs-wr-off-ns = <60>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <10>;
-		gpmc,oe-off-ns = <60>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <60>;
-		gpmc,rd-cycle-ns = <100>;
-		gpmc,wr-cycle-ns = <100>;
-		gpmc,access-ns = <50>;
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <75>;
-		gpmc,wr-data-mux-bus-ns = <15>;
-		gpmc,wr-access-ns = <75>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&reg_vcc3>;
-		vdd33a-supply = <&reg_vcc3>;
-		reg-io-width = <4>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 0x2>;
-		reg = <7 0 0xff>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lan9221_pins>;
-		phy-mode = "mii";
-	};
-};
diff --git a/src/arm/omap3-lilly-dbb056.dts b/src/arm/omap3-lilly-dbb056.dts
deleted file mode 100644
index 834f7c65f62d..000000000000
--- a/src/arm/omap3-lilly-dbb056.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-/dts-v1/;
-
-#include "omap3-lilly-a83x.dtsi"
-
-/ {
-	model = "INCOstartec LILLY-DBB056 (DM3730)";
-	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
-};
-
-&twl {
-	vaux2: regulator-vaux2 {
-		compatible = "ti,twl4030-vaux2";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcd_pins>;
-
-	lan9117_pins: pinmux_lan9117_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)   /* cam_fld.gpio_98 */
-		>;
-	};
-
-	gpio4_pins: pinmux_gpio4_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)   /* cam_xclkb.gpio_111 -> sja1000 IRQ */
-		>;
-	};
-
-	gpio5_pins: pinmux_gpio5_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcbsp1_clk.gpio_156 -> enable DSS */
-		>;
-	};
-
-	lcd_pins: pinmux_lcd_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat3.sdmmc2_dat3 */
-			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat4.sdmmc2_dir_dat0 */
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat5.sdmmc2_dir_dat1 */
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat6.sdmmc2_dir_cmd */
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)    /* sdmmc2_dat7.sdmmc2_clkin */
-			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_cts_rctx.gpio_163 -> wp */
-			OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_rts_sd.gpio_164 -> cd */
-		>;
-	};
-
-	spi1_pins: pinmux_spi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)   /* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)   /* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)   /* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-};
-
-&gpio4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio4_pins>;
-};
-
-&gpio5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio5_pins>;
-};
-
-&mmc2 {
-	status = "okay";
-	bus-width = <4>;
-	vmmc-supply = <&vmmc1>;
-	cd-gpios = <&gpio6 4 0>;   /* gpio_164 */
-	wp-gpios = <&gpio6 3 0>;   /* gpio_163 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	ti,dual-volt;
-};
-
-&mcspi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
-};
-
-&gpmc {
-	ranges = <0 0 0x30000000 0x1000000>,   /* nand assigned by COM a83x */
-		<4 0 0x20000000 0x01000000>,
-		<7 0 0x15000000 0x01000000>;   /* eth assigend by COM a83x */
-
-	ethernet@4,0 {
-		compatible = "smsc,lan9117", "smsc,lan9115";
-		bank-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <65>;
-		gpmc,cs-wr-off-ns = <65>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <10>;
-		gpmc,oe-off-ns = <65>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <65>;
-		gpmc,rd-cycle-ns = <100>;
-		gpmc,wr-cycle-ns = <100>;
-		gpmc,access-ns = <60>;
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <75>;
-		gpmc,wr-data-mux-bus-ns = <15>;
-		gpmc,wr-access-ns = <75>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&reg_vcc3>;
-		vdd33a-supply = <&reg_vcc3>;
-		reg-io-width = <4>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <2 0x2>;
-		reg = <4 0 0xff>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&lan9117_pins>;
-		phy-mode = "mii";
-		smsc,force-internal-phy;
-	};
-};
diff --git a/src/arm/omap3-n9.dts b/src/arm/omap3-n9.dts
deleted file mode 100644
index 9938b5dc1909..000000000000
--- a/src/arm/omap3-n9.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * omap3-n9.dts - Device Tree file for Nokia N9
- *
- * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "omap3-n950-n9.dtsi"
-
-/ {
-	model = "Nokia N9";
-	compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
-};
diff --git a/src/arm/omap3-n900.dts b/src/arm/omap3-n900.dts
deleted file mode 100644
index b15f1a77d684..000000000000
--- a/src/arm/omap3-n900.dts
+++ /dev/null
@@ -1,826 +0,0 @@
-/*
- * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 (or later) as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "omap34xx-hs.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Nokia N900";
-	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		heartbeat {
-			label = "debug::sleep";
-			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* gpio162 */
-			linux,default-trigger = "default-on";
-			pinctrl-names = "default";
-			pinctrl-0 = <&debug_leds>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		camera_lens_cover {
-			label = "Camera Lens Cover";
-			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
-			gpio-key,wakeup;
-		};
-
-		camera_focus {
-			label = "Camera Focus";
-			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
-			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
-			gpio-key,wakeup;
-		};
-
-		camera_capture {
-			label = "Camera Capture";
-			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
-			linux,code = <0xd4>; /* KEY_CAMERA */
-			gpio-key,wakeup;
-		};
-
-		lock_button {
-			label = "Lock Button";
-			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
-			linux,code = <0x98>; /* KEY_SCREENLOCK */
-			gpio-key,wakeup;
-		};
-
-		keypad_slide {
-			label = "Keypad Slide";
-			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
-			gpio-key,wakeup;
-		};
-
-		proximity_sensor {
-			label = "Proximity Sensor";
-			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
-		};
-	};
-
-	isp1704: isp1704 {
-		compatible = "nxp,isp1704";
-		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
-		usb-phy = <&usb2_phy>;
-	};
-
-	tv: connector {
-		compatible = "composite-connector";
-		label = "tv";
-
-		port {
-			tv_connector_in: endpoint {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-	};
-
-	sound: n900-audio {
-		compatible = "nokia,n900-audio";
-
-		nokia,cpu-dai = <&mcbsp2>;
-		nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
-		nokia,headphone-amplifier = <&tpa6130a2>;
-
-		tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
-		jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
-		eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
-		speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
-			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x18a (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0x18e (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0x192 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	debug_leds: pinmux_debug_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 */
-		>;
-	};
-
-	mcspi4_pins: pinmux_mcspi4_pins {
-		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
-			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
-			0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
-			0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
-			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
-			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
-		>;
-	};
-
-	acx565akm_pins: pinmux_acx565akm_pins {
-		pinctrl-single,pins = <
-			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
-		>;
-	};
-
-	dss_sdi_pins: pinmux_dss_sdi_pins {
-		pinctrl-single,pins = <
-			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
-			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
-			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
-			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
-
-			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
-			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
-		>;
-	};
-
-	wl1251_pins: pinmux_wl1251 {
-		pinctrl-single,pins = <
-			0x0ce (PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
-			0x05a (PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
-		>;
-	};
-
-	ssi_pins: pinmux_ssi {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
-			0x14e (PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
-			0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
-			0x14c (PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
-			0x154 (PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
-			0x156 (PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
-			0x158 (PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
-			0x15a (PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
-		>;
-	};
-
-	modem_pins: pinmux_modem {
-		pinctrl-single,pins = <
-			0x0ac (PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
-			0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
-			0x0b2 (PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
-			0x0b4 (PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
-			0x0b6 (PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
-			0x15e (PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <2200000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&vaux1 {
-	regulator-name = "V28";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-	regulator-always-on; /* due battery cover sensor */
-};
-
-&vaux2 {
-	regulator-name = "VCSI";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&vaux3 {
-	regulator-name = "VMMC2_30";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-&vaux4 {
-	regulator-name = "VCAM_ANA_28";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&vmmc1 {
-	regulator-name = "VMMC1";
-	regulator-min-microvolt = <1850000>;
-	regulator-max-microvolt = <3150000>;
-};
-
-&vmmc2 {
-	regulator-name = "V28_A";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-always-on; /* due VIO leak to AIC34 VDDs */
-};
-
-&vpll1 {
-	regulator-name = "VPLL";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&vpll2 {
-	regulator-name = "VSDI_CSI";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&vsim {
-	regulator-name = "VMMC2_IO_18";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-&vio {
-	regulator-name = "VIO";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-
-};
-
-&vintana1 {
-	regulator-name = "VINTANA1";
-	/* fixed to 1500000 */
-	regulator-always-on;
-};
-
-&vintana2 {
-	regulator-name = "VINTANA2";
-	regulator-min-microvolt = <2750000>;
-	regulator-max-microvolt = <2750000>;
-	regulator-always-on;
-};
-
-&vintdig {
-	regulator-name = "VINTDIG";
-	/* fixed to 1500000 */
-	regulator-always-on;
-};
-
-&twl {
-	twl_audio: audio {
-		compatible = "ti,twl4030-audio";
-		ti,enable-vibra = <1>;
-	};
-
-	twl_power: power {
-		compatible = "ti,twl4030-power-n900";
-		ti,use_poweroff;
-	};
-};
-
-&twl_keypad {
-	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
-			 MATRIX_KEY(0x00, 0x01, KEY_O)
-			 MATRIX_KEY(0x00, 0x02, KEY_P)
-			 MATRIX_KEY(0x00, 0x03, KEY_COMMA)
-			 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
-			 MATRIX_KEY(0x00, 0x06, KEY_A)
-			 MATRIX_KEY(0x00, 0x07, KEY_S)
-
-			 MATRIX_KEY(0x01, 0x00, KEY_W)
-			 MATRIX_KEY(0x01, 0x01, KEY_D)
-			 MATRIX_KEY(0x01, 0x02, KEY_F)
-			 MATRIX_KEY(0x01, 0x03, KEY_G)
-			 MATRIX_KEY(0x01, 0x04, KEY_H)
-			 MATRIX_KEY(0x01, 0x05, KEY_J)
-			 MATRIX_KEY(0x01, 0x06, KEY_K)
-			 MATRIX_KEY(0x01, 0x07, KEY_L)
-
-			 MATRIX_KEY(0x02, 0x00, KEY_E)
-			 MATRIX_KEY(0x02, 0x01, KEY_DOT)
-			 MATRIX_KEY(0x02, 0x02, KEY_UP)
-			 MATRIX_KEY(0x02, 0x03, KEY_ENTER)
-			 MATRIX_KEY(0x02, 0x05, KEY_Z)
-			 MATRIX_KEY(0x02, 0x06, KEY_X)
-			 MATRIX_KEY(0x02, 0x07, KEY_C)
-			 MATRIX_KEY(0x02, 0x08, KEY_F9)
-
-			 MATRIX_KEY(0x03, 0x00, KEY_R)
-			 MATRIX_KEY(0x03, 0x01, KEY_V)
-			 MATRIX_KEY(0x03, 0x02, KEY_B)
-			 MATRIX_KEY(0x03, 0x03, KEY_N)
-			 MATRIX_KEY(0x03, 0x04, KEY_M)
-			 MATRIX_KEY(0x03, 0x05, KEY_SPACE)
-			 MATRIX_KEY(0x03, 0x06, KEY_SPACE)
-			 MATRIX_KEY(0x03, 0x07, KEY_LEFT)
-
-			 MATRIX_KEY(0x04, 0x00, KEY_T)
-			 MATRIX_KEY(0x04, 0x01, KEY_DOWN)
-			 MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
-			 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
-			 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
-			 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
-			 MATRIX_KEY(0x04, 0x08, KEY_F10)
-
-			 MATRIX_KEY(0x05, 0x00, KEY_Y)
-			 MATRIX_KEY(0x05, 0x08, KEY_F11)
-
-			 MATRIX_KEY(0x06, 0x00, KEY_U)
-
-			 MATRIX_KEY(0x07, 0x00, KEY_I)
-			 MATRIX_KEY(0x07, 0x01, KEY_F7)
-			 MATRIX_KEY(0x07, 0x02, KEY_F8)
-			 >;
-};
-
-&twl_gpio {
-	ti,pullups	= <0x0>;
-	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <100000>;
-
-	tlv320aic3x: tlv320aic3x@18 {
-		compatible = "ti,tlv320aic3x";
-		reg = <0x18>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
-		ai3x-gpio-func = <
-			0 /* AIC3X_GPIO1_FUNC_DISABLED */
-			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
-		>;
-
-		AVDD-supply = <&vmmc2>;
-		DRVDD-supply = <&vmmc2>;
-		IOVDD-supply = <&vio>;
-		DVDD-supply = <&vio>;
-	};
-
-	tlv320aic3x_aux: tlv320aic3x@19 {
-		compatible = "ti,tlv320aic3x";
-		reg = <0x19>;
-		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
-
-		AVDD-supply = <&vmmc2>;
-		DRVDD-supply = <&vmmc2>;
-		IOVDD-supply = <&vio>;
-		DVDD-supply = <&vio>;
-	};
-
-	tsl2563: tsl2563@29 {
-		compatible = "amstaos,tsl2563";
-		reg = <0x29>;
-
-		amstaos,cover-comp-gain = <16>;
-	};
-
-	lp5523: lp5523@32 {
-		compatible = "national,lp5523";
-		reg = <0x32>;
-		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
-
-		chan0 {
-			chan-name = "lp5523:kb1";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan1 {
-			chan-name = "lp5523:kb2";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan2 {
-			chan-name = "lp5523:kb3";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan3 {
-			chan-name = "lp5523:kb4";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan4 {
-			chan-name = "lp5523:b";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan5 {
-			chan-name = "lp5523:g";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan6 {
-			chan-name = "lp5523:r";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan7 {
-			chan-name = "lp5523:kb5";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-
-		chan8 {
-			chan-name = "lp5523:kb6";
-			led-cur = /bits/ 8 <50>;
-			max-cur = /bits/ 8 <100>;
-		};
-	};
-
-	bq27200: bq27200@55 {
-		compatible = "ti,bq27200";
-		reg = <0x55>;
-	};
-
-	tpa6130a2: tpa6130a2@60 {
-		compatible = "ti,tpa6130a2";
-		reg = <0x60>;
-
-		Vdd-supply = <&vmmc2>;
-
-		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
-	};
-
-	bq24150a: bq24150a@6b {
-		compatible = "ti,bq24150a";
-		reg = <0x6b>;
-
-		ti,current-limit = <100>;
-		ti,weak-battery-voltage = <3400>;
-		ti,battery-regulation-voltage = <4200>;
-		ti,charge-current = <650>;
-		ti,termination-current = <100>;
-		ti,resistor-sense = <68>;
-
-		ti,usb-charger-detection = <&isp1704>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
-};
-
-/* most boards use vaux3, only some old versions use vmmc2 instead */
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vaux3>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <8>;
-	non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
-
-	/* gpio-irq for dma: 65 */
-
-	onenand@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x10000000>;
-
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,burst-length = <16>;
-		gpmc,burst-read;
-		gpmc,burst-wrap;
-		gpmc,burst-write;
-		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
-		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <87>;
-		gpmc,cs-wr-off-ns = <87>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <87>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <87>;
-		gpmc,rd-cycle-ns = <112>;
-		gpmc,wr-cycle-ns = <112>;
-		gpmc,access-ns = <81>;
-		gpmc,page-burst-access-ns = <15>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <81>;
-		gpmc,sync-clk-ps = <15000>;
-
-		/*
-		 * MTD partition table corresponding to Nokia's
-		 * Maemo 5 (Fremantle) release.
-		 */
-		partition@0 {
-			label = "bootloader";
-			reg = <0x00000000 0x00020000>;
-			read-only;
-		};
-		partition@1 {
-			label = "config";
-			reg = <0x00020000 0x00060000>;
-		};
-		partition@2 {
-			label = "log";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@3 {
-			label = "kernel";
-			reg = <0x000c0000 0x00200000>;
-		};
-		partition@4 {
-			label = "initfs";
-			reg = <0x002c0000 0x00200000>;
-		};
-		partition@5 {
-			label = "rootfs";
-			reg = <0x004c0000 0x0fb40000>;
-		};
-	};
-};
-
-&mcspi1 {
-	/*
-	 * For some reason, touchscreen is necessary for screen to work at
-	 * all on real hw. It works well without it on emulator.
-	 *
-	 * Also... order in the device tree actually matters here.
-	 */
-	tsc2005@0 {
-		compatible = "ti,tsc2005";
-		spi-max-frequency = <6000000>;
-		reg = <0>;
-
-		vio-supply = <&vio>;
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-max-x = <4096>;
-		touchscreen-max-y = <4096>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-
-	acx565akm@2 {
-		compatible = "sony,acx565akm";
-		spi-max-frequency = <6000000>;
-		reg = <2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&acx565akm_pins>;
-
-		label = "lcd";
-		reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&sdi_out>;
-			};
-		};
-	};
-};
-
-&mcspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi4_pins>;
-
-	wl1251@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl1251_pins>;
-
-		vio-supply = <&vio>;
-
-		compatible = "ti,wl1251";
-		reg = <0>;
-		spi-max-frequency = <48000000>;
-
-		spi-cpol;
-		spi-cpha;
-
-		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
-
-		interrupt-parent = <&gpio2>;
-		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
-	};
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <2>;
-	power = <50>;
-};
-
-&uart1 {
-	status = "disabled";
-};
-
-&uart2 {
-	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_sdi_pins>;
-
-	vdds_sdi-supply = <&vaux1>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			sdi_out: endpoint {
-				remote-endpoint = <&lcd_in>;
-				datapairs = <2>;
-			};
-		};
-	};
-};
-
-&venc {
-	status = "ok";
-
-	vdda-supply = <&vdac>;
-
-	port {
-		venc_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-			ti,channels = <1>;
-		};
-	};
-};
-
-&mcbsp2 {
-	status = "ok";
-};
-
-&ssi_port1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ssi_pins>;
-
-	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
-
-	modem: hsi-client {
-		compatible = "nokia,n900-modem";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&modem_pins>;
-
-		hsi-channel-ids = <0>, <1>, <2>, <3>;
-		hsi-channel-names = "mcsaab-control",
-				    "speech-control",
-				    "speech-data",
-				    "mcsaab-data";
-		hsi-speed-kbps = <55000>;
-		hsi-mode = "frame";
-		hsi-flow = "synchronized";
-		hsi-arb-mode = "round-robin";
-
-		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
-
-		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
-			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
-			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
-			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
-			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
-		gpio-names = "cmt_apeslpx",
-			     "cmt_rst_rq",
-			     "cmt_en",
-			     "cmt_rst",
-			     "cmt_bsi";
-	};
-};
-
-&ssi_port2 {
-	status = "disabled";
-};
diff --git a/src/arm/omap3-n950-n9.dtsi b/src/arm/omap3-n950-n9.dtsi
deleted file mode 100644
index 70addcba37c5..000000000000
--- a/src/arm/omap3-n950-n9.dtsi
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
- *
- * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap36xx-hs.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	vemmc: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VEMMC";
-		regulator-min-microvolt = <2900000>;
-		regulator-max-microvolt = <2900000>;
-		gpio = <&gpio5 29 0>; /* gpio line 157 */
-		startup-delay-us = <150>;
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2900000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-/include/ "twl4030.dtsi"
-
-&twl {
-	compatible = "ti,twl5031";
-};
-
-&twl_gpio {
-	ti,pullups	= <0x000001>; /* BIT(0) */
-	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
-};
-
-/* CSI-2 receiver */
-&vaux2 {
-	regulator-name = "vaux2";
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-};
-
-/* Cameras */
-&vaux3 {
-	regulator-name = "vaux3";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	status = "disabled";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vemmc>;
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&gpmc {
-	ranges = <0 0 0x04000000 0x20000000>;
-
-	onenand@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x20000000>;
-
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,burst-length = <16>;
-		gpmc,burst-read;
-		gpmc,burst-wrap;
-		gpmc,burst-write;
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <87>;
-		gpmc,cs-wr-off-ns = <87>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <87>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <87>;
-		gpmc,rd-cycle-ns = <112>;
-		gpmc,wr-cycle-ns = <112>;
-		gpmc,access-ns = <81>;
-		gpmc,page-burst-access-ns = <15>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <81>;
-		gpmc,sync-clk-ps = <15000>;
-
-		/*
-		 * MTD partition table corresponding to Nokia's MeeGo 1.2
-		 * Harmattan release.
-		 */
-		partition@0 {
-			label = "bootloader";
-			reg = <0x00000000 0x00100000>;
-		};
-		partition@1 {
-			label = "config";
-			reg = <0x00100000 0x002c0000>;
-		};
-		partition@2 {
-			label = "kernel";
-			reg = <0x003c0000 0x01000000>;
-		};
-		partition@3 {
-			label = "log";
-			reg = <0x013c0000 0x00200000>;
-		};
-		partition@4 {
-			label = "var";
-			reg = <0x015c0000 0x1ca40000>;
-		};
-		partition@5 {
-			label = "moslo";
-			reg = <0x1e000000 0x02000000>;
-		};
-		partition@6 {
-			label = "omap2-onenand";
-			reg = <0x00000000 0x20000000>;
-		};
-	};
-};
diff --git a/src/arm/omap3-n950.dts b/src/arm/omap3-n950.dts
deleted file mode 100644
index 261c5589bfa3..000000000000
--- a/src/arm/omap3-n950.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * omap3-n950.dts - Device Tree file for Nokia N950
- *
- * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "omap3-n950-n9.dtsi"
-
-/ {
-	model = "Nokia N950";
-	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
-};
diff --git a/src/arm/omap3-overo-alto35-common.dtsi b/src/arm/omap3-overo-alto35-common.dtsi
deleted file mode 100644
index 7aae8fb82c1f..000000000000
--- a/src/arm/omap3-overo-alto35-common.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Alto35 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd35.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		gpio148 {
-			label = "overo:red:gpio148";
-			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
-		};
-		gpio150 {
-			label = "overo:yellow:gpio150";
-			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
-		};
-		gpio151 {
-			label = "overo:blue:gpio151";
-			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
-		};
-		gpio170 {
-			label = "overo:green:gpio170";
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		button0@10 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
-			gpio-key,wakeup;
-		};
-	};
-};
-
-&omap3_pmx_core {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4)	/* uart1_tx.gpio_148 */
-			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)	/* uart1_cts.gpio_150 */
-			OMAP3_CORE1_IOPAD(0x2182, PIN_OUTPUT | MUX_MODE4)	/* uart1_rx.gpio_151 */
-			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4)		/* sys_clkout1.gpio_10 */
-		>;
-	};
-};
-
-&usbhshost {
-	status = "disabled";
-};
-
diff --git a/src/arm/omap3-overo-alto35.dts b/src/arm/omap3-overo-alto35.dts
deleted file mode 100644
index a3249eb7501d..000000000000
--- a/src/arm/omap3-overo-alto35.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Alto35 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-alto35-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Alto35";
-	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
diff --git a/src/arm/omap3-overo-base.dtsi b/src/arm/omap3-overo-base.dtsi
deleted file mode 100644
index d36bf0250a05..000000000000
--- a/src/arm/omap3-overo-base.dtsi
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * The Gumstix Overo must be combined with an expansion board.
- */
-
-/ {
-	pwmleds {
-		compatible = "pwm-leds";
-
-		overo {
-			label = "overo:blue:COM";
-			pwms = <&twl_pwmled 1 7812500>;
-			max-brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	sound {
-		compatible = "ti,omap-twl4030";
-		ti,model = "overo";
-
-		ti,mcbsp = <&mcbsp2>;
-		ti,codec = <&twl_audio>;
-	};
-
-	/* HS USB Port 2 Power */
-	hsusb2_power: hsusb2_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb2_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio6 8 0>;				/* gpio_168: vbus enable */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;	/* gpio_183 */
-		vcc-supply = <&hsusb2_power>;
-	};
-
-	/* Regulator to trigger the nPoweron signal of the Wifi module */
-	w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-w3cbw003c-npoweron";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;		/* gpio_54: nPoweron */
-		enable-active-high;
-	};
-
-	/* Regulator to trigger the nReset signal of the Wifi module */
-	w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
-		pinctrl-names = "default";
-		pinctrl-0 = <&w3cbw003c_pins &w3cbw003c_2_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-w3cbw003c-wifi-nreset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;		/* gpio_16: WiFi nReset */
-		startup-delay-us = <10000>;
-	};
-
-	/* Regulator to trigger the nReset signal of the Bluetooth module */
-	w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-w3cbw003c-bt-nreset";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;		/* gpio_164: BT nReset */
-		startup-delay-us = <10000>;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_pins
-	>;
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
-			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl.i2c1_scl */
-			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda.i2c1_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
-			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
-			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
-			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-		>;
-	};
-
-	/* WiFi/BT combo */
-	w3cbw003c_pins: pinmux_w3cbw003c_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)		/* gpmc_ncs3.gpio_54 */
-			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
-		>;
-	};
-
-	hsusb2_pins: pinmux_hsusb2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
-			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
-			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
-			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
-			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
-			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
-			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)		/* i2c2_scl.gpio_168 */
-			OMAP3_CORE1_IOPAD(0x21c0, PIN_OUTPUT | MUX_MODE4)		/* i2c2_sda.gpio_183 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-
-		twl_audio: audio {
-			compatible = "ti,twl4030-audio";
-			codec {
-			};
-		};
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-/* i2c2 pins are used for gpio */
-&i2c2 {
-	status = "disabled";
-};
-
-/* on board microSD slot */
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc1>;
-	bus-width = <4>;
-};
-
-/* optional on board WiFi */
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&w3cbw003c_npoweron>;
-	vqmmc-supply = <&w3cbw003c_bt_nreset>;
-	vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
-	bus-width = <4>;
-	cap-sdio-irq;
-	non-removable;
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	phys = <&usb2_phy>;
-	phy-names = "usb2-phy";
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port2-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
diff --git a/src/arm/omap3-overo-chestnut43-common.dtsi b/src/arm/omap3-overo-chestnut43-common.dtsi
deleted file mode 100644
index 17b82f82638a..000000000000
--- a/src/arm/omap3-overo-chestnut43-common.dtsi
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Chestnut43 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd43.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-		gpio22 {
-			label = "overo:blue:gpio22";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0@23 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
-		};
-		button1@14 {
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
-		};
-	};
-};
-
-#include "omap-gpmc-smsc9221.dtsi"
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
-	ethernet@gpmc {
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
-	};
-};
-
-&lis33de {
-	status = "disabled";
-};
-
diff --git a/src/arm/omap3-overo-chestnut43.dts b/src/arm/omap3-overo-chestnut43.dts
deleted file mode 100644
index fe0824aca3c0..000000000000
--- a/src/arm/omap3-overo-chestnut43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Chestnut43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-chestnut43-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Chestnut43";
-	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-common-dvi.dtsi b/src/arm/omap3-overo-common-dvi.dtsi
deleted file mode 100644
index 802f704f67e5..000000000000
--- a/src/arm/omap3-overo-common-dvi.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * DVI output for some Gumstix Overo boards (Tobi and Summit)
- */
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &dvi0;
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-};
-
diff --git a/src/arm/omap3-overo-common-lcd35.dtsi b/src/arm/omap3-overo-common-lcd35.dtsi
deleted file mode 100644
index 233c69e50ae3..000000000000
--- a/src/arm/omap3-overo-common-lcd35.dtsi
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
- */
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-
-	lb035_pins: pinmux_lb035_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	ads7846_pins: pinmux_ads7846_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
-		>;
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	ads7846reg: ads7846-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "ads7846-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
-
-		default-on;
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	lcd0: display@0 {
-		compatible = "lgphilips,lb035q02";
-		label = "lcd";
-
-		reg = <1>;					/* CS1 */
-		spi-max-frequency = <10000000>;
-		spi-cpol;
-		spi-cpha;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lb035_pins>;
-		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;	/* gpio_144 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	/* touch controller */
-	ads7846@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ads7846_pins>;
-
-		compatible = "ti,ads7846";
-		vcc-supply = <&ads7846reg>;
-
-		reg = <0>;				/* CS0 */
-		spi-max-frequency = <1500000>;
-
-		interrupt-parent = <&gpio4>;
-		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 0>;
-
-		ti,x-min = /bits/ 16 <0x0>;
-		ti,x-max = /bits/ 16 <0x0fff>;
-		ti,y-min = /bits/ 16 <0x0>;
-		ti,y-max = /bits/ 16 <0x0fff>;
-		ti,x-plate-ohms = /bits/ 16 <180>;
-		ti,pressure-max = /bits/ 16 <255>;
-
-		linux,wakeup;
-	};
-};
diff --git a/src/arm/omap3-overo-common-lcd43.dtsi b/src/arm/omap3-overo-common-lcd43.dtsi
deleted file mode 100644
index f5395b7da912..000000000000
--- a/src/arm/omap3-overo-common-lcd43.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
- */
-
-&omap3_pmx_core {
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
-			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
-			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
-			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
-			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
-			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
-			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
-			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
-			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
-			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
-			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
-			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
-			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
-			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
-			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
-			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
-			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
-			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
-			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
-			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
-			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
-			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
-			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
-			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
-			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
-			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
-			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
-			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
-		>;
-	};
-
-	lte430_pins: pinmux_lte430_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
-			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
-			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
-			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	ads7846_pins: pinmux_ads7846_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
-		>;
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	lcd0: display@0 {
-		compatible = "samsung,lte430wq-f0c", "panel-dpi";
-		label = "lcd";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lte430_pins>;
-		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;		/* gpio_144 */
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <9200000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <8>;
-			hback-porch = <4>;
-			hsync-len = <41>;
-			vback-porch = <2>;
-			vfront-porch = <4>;
-			vsync-len = <10>;
-
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-
-	ads7846reg: ads7846-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "ads7846-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
-
-		default-on;
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	/* touch controller */
-	ads7846@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&ads7846_pins>;
-
-		compatible = "ti,ads7846";
-		vcc-supply = <&ads7846reg>;
-
-		reg = <0>;				/* CS0 */
-		spi-max-frequency = <1500000>;
-
-		interrupt-parent = <&gpio4>;
-		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 0>;
-
-		ti,x-min = /bits/ 16 <0x0>;
-		ti,x-max = /bits/ 16 <0x0fff>;
-		ti,y-min = /bits/ 16 <0x0>;
-		ti,y-max = /bits/ 16 <0x0fff>;
-		ti,x-plate-ohms = /bits/ 16 <180>;
-		ti,pressure-max = /bits/ 16 <255>;
-
-		linux,wakeup;
-	};
-};
-
diff --git a/src/arm/omap3-overo-common-peripherals.dtsi b/src/arm/omap3-overo-common-peripherals.dtsi
deleted file mode 100644
index 5831bcc52966..000000000000
--- a/src/arm/omap3-overo-common-peripherals.dtsi
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
- */
-
-/ {
-	lis33_3v3: lis33-3v3-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "lis33-3v3-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	lis33_1v8: lis33-1v8-reg {
-		compatible = "regulator-fixed";
-		regulator-name = "lis33-1v8-reg";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-};
-
-&omap3_pmx_core {
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
-			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <100000>;
-
-	/* optional 1K EEPROM with revision information */
-	eeprom@51 {
-		compatible = "atmel,24c01";
-		reg = <0x51>;
-		pagesize = <8>;
-	};
-
-	lis33de: lis33de@1d {
-		compatible = "st,lis33de", "st,lis3lv02d";
-		reg = <0x1d>;
-		Vdd-supply = <&lis33_1v8>;
-		Vdd_IO-supply = <&lis33_3v3>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
diff --git a/src/arm/omap3-overo-gallop43-common.dtsi b/src/arm/omap3-overo-gallop43-common.dtsi
deleted file mode 100644
index 49d2254a99b0..000000000000
--- a/src/arm/omap3-overo-gallop43-common.dtsi
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Gallop43 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd43.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-		gpio22 {
-			label = "overo:blue:gpio22";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0@23 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
-		};
-		button1@14 {
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
-		};
-	};
-};
-
-&usbhshost {
-	status = "disabled";
-};
-
diff --git a/src/arm/omap3-overo-gallop43.dts b/src/arm/omap3-overo-gallop43.dts
deleted file mode 100644
index 241f5c1914e0..000000000000
--- a/src/arm/omap3-overo-gallop43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Gallop43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-gallop43-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Gallop43";
-	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-palo43-common.dtsi b/src/arm/omap3-overo-palo43-common.dtsi
deleted file mode 100644
index 087aedf5b902..000000000000
--- a/src/arm/omap3-overo-palo43-common.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Palo43 expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-lcd43.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-		gpio22 {
-			label = "overo:blue:gpio22";
-			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&button_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0@23 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
-		};
-		button1@14 {
-			label = "button1";
-			linux,code = <BTN_1>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
-		};
-	};
-};
-
diff --git a/src/arm/omap3-overo-palo43.dts b/src/arm/omap3-overo-palo43.dts
deleted file mode 100644
index cedb103b4b66..000000000000
--- a/src/arm/omap3-overo-palo43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Palo43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-palo43-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Palo43";
-	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-storm-alto35.dts b/src/arm/omap3-overo-storm-alto35.dts
deleted file mode 100644
index e9cae52afc25..000000000000
--- a/src/arm/omap3-overo-storm-alto35.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Alto35 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-alto35-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
-	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
diff --git a/src/arm/omap3-overo-storm-chestnut43.dts b/src/arm/omap3-overo-storm-chestnut43.dts
deleted file mode 100644
index 7d82fdfd9909..000000000000
--- a/src/arm/omap3-overo-storm-chestnut43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Chestnut43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-chestnut43-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
-	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-storm-gallop43.dts b/src/arm/omap3-overo-storm-gallop43.dts
deleted file mode 100644
index a1b57e0cf37f..000000000000
--- a/src/arm/omap3-overo-storm-gallop43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Gallop43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-gallop43-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
-	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-storm-palo43.dts b/src/arm/omap3-overo-storm-palo43.dts
deleted file mode 100644
index b585d8fbc347..000000000000
--- a/src/arm/omap3-overo-storm-palo43.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Palo43 expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-palo43-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
-	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
-			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-storm-summit.dts b/src/arm/omap3-overo-storm-summit.dts
deleted file mode 100644
index a0d7fd8369d7..000000000000
--- a/src/arm/omap3-overo-storm-summit.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Summit expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-summit-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
-	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-storm-tobi.dts b/src/arm/omap3-overo-storm-tobi.dts
deleted file mode 100644
index 879383acad87..000000000000
--- a/src/arm/omap3-overo-storm-tobi.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo-storm.dtsi"
-#include "omap3-overo-tobi-common.dtsi"
-
-/ {
-	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
-	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
-};
-
diff --git a/src/arm/omap3-overo-storm.dtsi b/src/arm/omap3-overo-storm.dtsi
deleted file mode 100644
index 6cb418b4124a..000000000000
--- a/src/arm/omap3-overo-storm.dtsi
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap36xx.dtsi"
-#include "omap3-overo-base.dtsi"
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-summit-common.dtsi b/src/arm/omap3-overo-summit-common.dtsi
deleted file mode 100644
index 0ac97ba98549..000000000000
--- a/src/arm/omap3-overo-summit-common.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Summit expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-dvi.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&lis33de {
-	status = "disabled";
-};
-
diff --git a/src/arm/omap3-overo-summit.dts b/src/arm/omap3-overo-summit.dts
deleted file mode 100644
index 69765609455a..000000000000
--- a/src/arm/omap3-overo-summit.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Summit expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-summit-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Summit";
-	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
-&omap3_pmx_core2 {
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
-		>;
-	};
-};
-
diff --git a/src/arm/omap3-overo-tobi-common.dtsi b/src/arm/omap3-overo-tobi-common.dtsi
deleted file mode 100644
index 9e24b6a1d07b..000000000000
--- a/src/arm/omap3-overo-tobi-common.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo-common-peripherals.dtsi"
-#include "omap3-overo-common-dvi.dtsi"
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-#include "omap-gpmc-smsc9221.dtsi"
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
-	ethernet@gpmc {
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
-	};
-};
-
-&lis33de {
-	status = "disabled";
-};
-
diff --git a/src/arm/omap3-overo-tobi.dts b/src/arm/omap3-overo-tobi.dts
deleted file mode 100644
index fd6400efcdee..000000000000
--- a/src/arm/omap3-overo-tobi.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-/dts-v1/;
-
-#include "omap3-overo.dtsi"
-#include "omap3-overo-tobi-common.dtsi"
-
-/ {
-	model = "OMAP35xx Gumstix Overo on Tobi";
-	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
-};
-
diff --git a/src/arm/omap3-overo.dtsi b/src/arm/omap3-overo.dtsi
deleted file mode 100644
index 69ca7c45bca2..000000000000
--- a/src/arm/omap3-overo.dtsi
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap34xx.dtsi"
-#include "omap3-overo-base.dtsi"
-
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusb2_2_pins
-	>;
-
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
-			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
-			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
-			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
-			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
-			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
-		>;
-	};
-
-	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
-		pinctrl-single,pins = <
-			OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
-		>;
-	};
-};
-
-&mcbsp2 {
-	status = "okay";
-};
diff --git a/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi b/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi
deleted file mode 100644
index f4b1a61853e3..000000000000
--- a/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Common file for omap dpi panels with QVGA and reset pins
- *
- * Note that the board specifc DTS file needs to specify
- * at minimum the GPIO enable-gpios for display, and
- * gpios for gpio-backlight.
- */
-
-/ {
-	aliases {
-		display0 = &lcd0;
-	};
-
-	backlight0: backlight {
-		compatible = "gpio-backlight";
-		default-on;
-	};
-
-	/* 3.3V GPIO controlled regulator for LCD_ENVDD */
-	lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <70000>;
-	};
-
-	lcd0: display {
-		compatible = "sharp,ls037v7dw01";
-		label = "lcd";
-		power-supply = <&lcd_3v3>;
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-};
-
-/* Needed to power the DPI pins */
-&vpll2 {
-	regulator-always-on;
-};
-
-&dss {
-	status = "ok";
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <18>;
-		};
-	};
-};
-
-&mcspi1 {
-	tsc2046@0 {
-		reg = <0>;			/* CS0 */
-		compatible = "ti,tsc2046";
-		spi-max-frequency = <1000000>;
-		vcc-supply = <&lcd_3v3>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <8000>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <4800>;
-		ti,x-plate-ohms = /bits/ 16 <40>;
-		ti,pressure-max = /bits/ 16 <255>;
-		ti,swap-xy;
-		linux,wakeup;
-	};
-};
diff --git a/src/arm/omap3-sb-t35.dtsi b/src/arm/omap3-sb-t35.dtsi
deleted file mode 100644
index d59e3de1441e..000000000000
--- a/src/arm/omap3-sb-t35.dtsi
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
- */
-
-&omap3_pmx_core {
-	smsc2_pins: pinmux_smsc2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs4.gpmc_ncs4 */
-			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
-		>;
-	};
-};
-
-&gpmc {
-	ranges = <4 0 0x2d000000 0x01000000>;
-
-	smsc2: ethernet@4,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		pinctrl-names = "default";
-		pinctrl-0 = <&smsc2_pins>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		reg = <4 0 0xff>;
-		bank-width = <2>;
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <1>;
-		gpmc,cs-rd-off-ns = <180>;
-		gpmc,cs-wr-off-ns = <180>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <144>;
-		gpmc,page-burst-access-ns = <24>;
-		gpmc,bus-turnaround-ns = <90>;
-		gpmc,cycle2cycle-delay-ns = <90>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-		vddvario-supply = <&vddvario>;
-		vdd33a-supply = <&vdd33a>;
-		reg-io-width = <4>;
-		smsc,save-mac-address;
-	};
-};
diff --git a/src/arm/omap3-sbc-t3517.dts b/src/arm/omap3-sbc-t3517.dts
deleted file mode 100644
index 42189b65d393..000000000000
--- a/src/arm/omap3-sbc-t3517.dts
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Suppport for CompuLab SBC-T3517 with CM-T3517
- */
-
-#include "omap3-cm-t3517.dts"
-#include "omap3-sb-t35.dtsi"
-
-/ {
-	model = "CompuLab SBC-T3517 with CM-T3517";
-	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
-
-	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
-	vddvario: regulator-vddvario-sb-t35 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddvario";
-		regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a-sb-t35 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&sb_t35_usb_hub_pins
-			&usb_hub_pins
-		    >;
-
-	mmc1_aux_pins: pinmux_mmc1_aux_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
-		>;
-	};
-
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&mmc1_pins
-		&mmc1_aux_pins
-	>;
-
-	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
-	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
-};
diff --git a/src/arm/omap3-sbc-t3530.dts b/src/arm/omap3-sbc-t3530.dts
deleted file mode 100644
index bbbeea6b1988..000000000000
--- a/src/arm/omap3-sbc-t3530.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Suppport for CompuLab SBC-T3530 with CM-T3530
- */
-
-#include "omap3-cm-t3530.dts"
-#include "omap3-sb-t35.dtsi"
-
-/ {
-	model = "CompuLab SBC-T3530 with CM-T3530";
-	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sb_t35_usb_hub_pins>;
-
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
-		>;
-	};
-};
-
-/*
- * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
- * SB-T35 baseboard respectively.
- * This setting includes both chips in SBC-T3530 board device tree.
- */
-&gpmc {
-	ranges = <5 0 0x2c000000 0x01000000>,
-		 <4 0 0x2d000000 0x01000000>;
-};
-
-&mmc1 {
-	cd-gpios =  <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
-};
diff --git a/src/arm/omap3-sbc-t3730.dts b/src/arm/omap3-sbc-t3730.dts
deleted file mode 100644
index 08e4a7086f22..000000000000
--- a/src/arm/omap3-sbc-t3730.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Suppport for CompuLab SBC-T3730 with CM-T3730
- */
-
-#include "omap3-cm-t3730.dts"
-#include "omap3-sb-t35.dtsi"
-
-/ {
-	model = "CompuLab SBC-T3730 with CM-T3730";
-	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
-};
-
-&omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sb_t35_usb_hub_pins>;
-
-	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
-		>;
-	};
-};
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x01000000>,
-		 <4 0 0x2d000000 0x01000000>;
-};
diff --git a/src/arm/omap3-zoom3.dts b/src/arm/omap3-zoom3.dts
deleted file mode 100644
index 6644f516a42b..000000000000
--- a/src/arm/omap3-zoom3.dts
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap36xx.dtsi"
-#include "omap-zoom-common.dtsi"
-
-/ {
-	model = "TI Zoom3";
-	compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vcc>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio4 5 0>;	/* gpio101 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&omap3_pmx_core {
-	/* REVISIT: twl gpio0 is mmc0_cd */
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			0x134 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
-			0x136 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
-			0x138 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
-			0x13a (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
-			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-                        0x150 (PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        0x14e (PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        0x14c (PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        0x146 (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
-                        0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        0x16c (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-                        0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0xea (PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
-		>;
-	};
-};
-
-&omap3_pmx_core2 {
-	mmc3_2_pins: pinmux_mmc3_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
-			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
-			OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
-			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
-			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
-		>;
-	};
-};
-
-&omap3_pmx_wkup {
-	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
-		pinctrl-single,pins = <
-			0x1a (PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
-		>;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-		interrupt-parent = <&intc>;
-	};
-};
-
-#include "twl4030.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * TVP5146 Video decoder-in for analog input support.
-	 */
-	tvp5146@5c {
-		compatible = "ti,tvp5146m2";
-		reg = <0x5c>;
-	};
-};
-
-&twl_gpio {
-	ti,use-leds;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-};
-/*
-&mmc2 {
-	vmmc-supply = <&vmmc2>;
-	ti,non-removable;
-	bus-width = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-*/
-&mmc3 {
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-       status = "disabled";
-};
-
-&usb_otg_hs {
-	interface-type = <0>;
-	usb-phy = <&usb2_phy>;
-	mode = <3>;
-	power = <50>;
-};
diff --git a/src/arm/omap3.dtsi b/src/arm/omap3.dtsi
deleted file mode 100644
index 575a49bf968d..000000000000
--- a/src/arm/omap3.dtsi
+++ /dev/null
@@ -1,810 +0,0 @@
-/*
- * Device Tree Source for OMAP3 SoC
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,omap3430", "ti,omap3";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0x0>;
-
-			clocks = <&dpll1_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		reg = <0x54000000 0x800000>;
-		interrupts = <3>;
-		ti,hwmods = "debugss";
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-
-		iva: iva {
-			compatible = "ti,iva2.2";
-			ti,hwmods = "iva";
-
-			dsp {
-				compatible = "ti,omap3-c64";
-			};
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP3 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		reg = <0x68000000 0x10000>;
-		interrupts = <9 10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		aes: aes@480c5000 {
-			compatible = "ti,omap3-aes";
-			ti,hwmods = "aes";
-			reg = <0x480c5000 0x50>;
-			interrupts = <0>;
-		};
-
-		prm: prm@48306000 {
-			compatible = "ti,omap3-prm";
-			reg = <0x48306000 0x4000>;
-
-			prm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prm_clockdomains: clockdomains {
-			};
-		};
-
-		cm: cm@48004000 {
-			compatible = "ti,omap3-cm";
-			reg = <0x48004000 0x4000>;
-
-			cm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@48002000 {
-			compatible = "ti,omap3-scrm";
-			reg = <0x48002000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@48320000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x48320000 0x20>;
-			ti,hwmods = "counter_32k";
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,omap2-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			ti,intc-size = <96>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		sdma: dma-controller@48056000 {
-			compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
-			reg = <0x48056000 0x1000>;
-			interrupts = <12>,
-				     <13>,
-				     <14>,
-				     <15>;
-			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <96>;
-		};
-
-		omap3_pmx_core: pinmux@48002030 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002030 0x0238>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_pmx_wkup: pinmux@48002a00 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x48002a00 0x5c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		omap3_scm_general: tisyscon@48002270 {
-			compatible = "syscon";
-			reg = <0x48002270 0x2f0>;
-		};
-
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0x2b0 0x4>;
-			syscon = <&omap3_scm_general>;
-			pbias_mmc_reg: pbias_mmc_omap2430 {
-				regulator-name = "pbias_mmc_omap2430";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
-		gpio1: gpio@48310000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x48310000 0x200>;
-			interrupts = <29>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@49050000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49050000 0x200>;
-			interrupts = <30>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@49052000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49052000 0x200>;
-			interrupts = <31>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@49054000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49054000 0x200>;
-			interrupts = <32>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@49056000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49056000 0x200>;
-			interrupts = <33>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio@49058000 {
-			compatible = "ti,omap3-gpio";
-			reg = <0x49058000 0x200>;
-			interrupts = <34>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x4806a000 0x2000>;
-			interrupts-extended = <&intc 72>;
-			dmas = <&sdma 49 &sdma 50>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x4806c000 0x400>;
-			interrupts-extended = <&intc 73>;
-			dmas = <&sdma 51 &sdma 52>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@49020000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x49020000 0x400>;
-			interrupts-extended = <&intc 74>;
-			dmas = <&sdma 53 &sdma 54>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap3-i2c";
-			reg = <0x48070000 0x80>;
-			interrupts = <56>;
-			dmas = <&sdma 27 &sdma 28>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap3-i2c";
-			reg = <0x48072000 0x80>;
-			interrupts = <57>;
-			dmas = <&sdma 29 &sdma 30>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap3-i2c";
-			reg = <0x48060000 0x80>;
-			interrupts = <61>;
-			dmas = <&sdma 25 &sdma 26>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-		};
-
-		mailbox: mailbox@48094000 {
-			compatible = "ti,omap3-mailbox";
-			ti,hwmods = "mailbox";
-			reg = <0x48094000 0x200>;
-			interrupts = <26>;
-			ti,mbox-num-users = <2>;
-			ti,mbox-num-fifos = <2>;
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x48098000 0x100>;
-			interrupts = <65>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x4809a000 0x100>;
-			interrupts = <66>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x480b8000 0x100>;
-			interrupts = <91>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>,
-			       <&sdma 16>,
-			       <&sdma 23>,
-			       <&sdma 24>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap2-mcspi";
-			reg = <0x480ba000 0x100>;
-			interrupts = <48>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-		};
-
-		hdqw1w: 1w@480b2000 {
-			compatible = "ti,omap3-1w";
-			reg = <0x480b2000 0x1000>;
-			interrupts = <58>;
-			ti,hwmods = "hdq1w";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap3-hsmmc";
-			reg = <0x4809c000 0x200>;
-			interrupts = <83>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap3-hsmmc";
-			reg = <0x480b4000 0x200>;
-			interrupts = <86>;
-			ti,hwmods = "mmc2";
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap3-hsmmc";
-			reg = <0x480ad000 0x200>;
-			interrupts = <94>;
-			ti,hwmods = "mmc3";
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-		};
-
-		mmu_isp: mmu@480bd400 {
-			compatible = "ti,omap2-iommu";
-			reg = <0x480bd400 0x80>;
-			interrupts = <24>;
-			ti,hwmods = "mmu_isp";
-			ti,#tlb-entries = <8>;
-		};
-
-		mmu_iva: mmu@5d000000 {
-			compatible = "ti,omap2-iommu";
-			reg = <0x5d000000 0x80>;
-			interrupts = <28>;
-			ti,hwmods = "mmu_iva";
-			status = "disabled";
-		};
-
-		wdt2: wdt@48314000 {
-			compatible = "ti,omap3-wdt";
-			reg = <0x48314000 0x80>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		mcbsp1: mcbsp@48074000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x48074000 0xff>;
-			reg-names = "mpu";
-			interrupts = <16>, /* OCP compliant interrupt */
-				     <59>, /* TX interrupt */
-				     <60>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@49022000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x49022000 0xff>,
-			      <0x49028000 0xff>;
-			reg-names = "mpu", "sidetone";
-			interrupts = <17>, /* OCP compliant interrupt */
-				     <62>, /* TX interrupt */
-				     <63>, /* RX interrupt */
-				     <4>;  /* Sidetone */
-			interrupt-names = "common", "tx", "rx", "sidetone";
-			ti,buffer-size = <1280>;
-			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp3: mcbsp@49024000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x49024000 0xff>,
-			      <0x4902a000 0xff>;
-			reg-names = "mpu", "sidetone";
-			interrupts = <22>, /* OCP compliant interrupt */
-				     <89>, /* TX interrupt */
-				     <90>, /* RX interrupt */
-				     <5>;  /* Sidetone */
-			interrupt-names = "common", "tx", "rx", "sidetone";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
-			dmas = <&sdma 17>,
-			       <&sdma 18>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp4: mcbsp@49026000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x49026000 0xff>;
-			reg-names = "mpu";
-			interrupts = <23>, /* OCP compliant interrupt */
-				     <54>, /* TX interrupt */
-				     <55>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp4";
-			dmas = <&sdma 19>,
-			       <&sdma 20>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp5: mcbsp@48096000 {
-			compatible = "ti,omap3-mcbsp";
-			reg = <0x48096000 0xff>;
-			reg-names = "mpu";
-			interrupts = <27>, /* OCP compliant interrupt */
-				     <81>, /* TX interrupt */
-				     <82>; /* RX interrupt */
-			interrupt-names = "common", "tx", "rx";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp5";
-			dmas = <&sdma 21>,
-			       <&sdma 22>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		sham: sham@480c3000 {
-			compatible = "ti,omap3-sham";
-			ti,hwmods = "sham";
-			reg = <0x480c3000 0x64>;
-			interrupts = <49>;
-		};
-
-		smartreflex_core: smartreflex@480cb000 {
-			compatible = "ti,omap3-smartreflex-core";
-			ti,hwmods = "smartreflex_core";
-			reg = <0x480cb000 0x400>;
-			interrupts = <19>;
-		};
-
-		smartreflex_mpu_iva: smartreflex@480c9000 {
-			compatible = "ti,omap3-smartreflex-iva";
-			ti,hwmods = "smartreflex_mpu_iva";
-			reg = <0x480c9000 0x400>;
-			interrupts = <18>;
-		};
-
-		timer1: timer@48318000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48318000 0x400>;
-			interrupts = <37>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@49032000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49032000 0x400>;
-			interrupts = <38>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@49034000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49034000 0x400>;
-			interrupts = <39>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@49036000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49036000 0x400>;
-			interrupts = <40>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@49038000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49038000 0x400>;
-			interrupts = <41>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-		};
-
-		timer6: timer@4903a000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4903a000 0x400>;
-			interrupts = <42>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-		};
-
-		timer7: timer@4903c000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4903c000 0x400>;
-			interrupts = <43>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@4903e000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4903e000 0x400>;
-			interrupts = <44>;
-			ti,hwmods = "timer8";
-			ti,timer-pwm;
-			ti,timer-dsp;
-		};
-
-		timer9: timer@49040000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x49040000 0x400>;
-			interrupts = <45>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48086000 0x400>;
-			interrupts = <46>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48088000 0x400>;
-			interrupts = <47>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		timer12: timer@48304000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48304000 0x400>;
-			interrupts = <95>;
-			ti,hwmods = "timer12";
-			ti,timer-alwon;
-			ti,timer-secure;
-		};
-
-		usbhstll: usbhstll@48062000 {
-			compatible = "ti,usbhs-tll";
-			reg = <0x48062000 0x1000>;
-			interrupts = <78>;
-			ti,hwmods = "usb_tll_hs";
-		};
-
-		usbhshost: usbhshost@48064000 {
-			compatible = "ti,usbhs-host";
-			reg = <0x48064000 0x400>;
-			ti,hwmods = "usb_host_hs";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbhsohci: ohci@48064400 {
-				compatible = "ti,ohci-omap3";
-				reg = <0x48064400 0x400>;
-				interrupt-parent = <&intc>;
-				interrupts = <76>;
-			};
-
-			usbhsehci: ehci@48064800 {
-				compatible = "ti,ehci-omap";
-				reg = <0x48064800 0x400>;
-				interrupt-parent = <&intc>;
-				interrupts = <77>;
-			};
-		};
-
-		gpmc: gpmc@6e000000 {
-			compatible = "ti,omap3430-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x6e000000 0x02d0>;
-			interrupts = <20>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-		};
-
-		usb_otg_hs: usb_otg_hs@480ab000 {
-			compatible = "ti,omap3-musb";
-			reg = <0x480ab000 0x1000>;
-			interrupts = <92>, <93>;
-			interrupt-names = "mc", "dma";
-			ti,hwmods = "usb_otg_hs";
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
-		};
-
-		dss: dss@48050000 {
-			compatible = "ti,omap3-dss";
-			reg = <0x48050000 0x200>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&dss1_alwon_fck>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@48050400 {
-				compatible = "ti,omap3-dispc";
-				reg = <0x48050400 0x400>;
-				interrupts = <25>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss1_alwon_fck>;
-				clock-names = "fck";
-			};
-
-			dsi: encoder@4804fc00 {
-				compatible = "ti,omap3-dsi";
-				reg = <0x4804fc00 0x200>,
-				      <0x4804fe00 0x40>,
-				      <0x4804ff00 0x20>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <25>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi1";
-				clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
-				clock-names = "fck", "sys_clk";
-			};
-
-			rfbi: encoder@48050800 {
-				compatible = "ti,omap3-rfbi";
-				reg = <0x48050800 0x100>;
-				status = "disabled";
-				ti,hwmods = "dss_rfbi";
-				clocks = <&dss1_alwon_fck>, <&dss_ick>;
-				clock-names = "fck", "ick";
-			};
-
-			venc: encoder@48050c00 {
-				compatible = "ti,omap3-venc";
-				reg = <0x48050c00 0x100>;
-				status = "disabled";
-				ti,hwmods = "dss_venc";
-				clocks = <&dss_tv_fck>;
-				clock-names = "fck";
-			};
-		};
-
-		ssi: ssi-controller@48058000 {
-			compatible = "ti,omap3-ssi";
-			ti,hwmods = "ssi";
-
-			status = "disabled";
-
-			reg = <0x48058000 0x1000>,
-			      <0x48059000 0x1000>;
-			reg-names = "sys",
-				    "gdd";
-
-			interrupts = <71>;
-			interrupt-names = "gdd_mpu";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			ssi_port1: ssi-port@4805a000 {
-				compatible = "ti,omap3-ssi-port";
-
-				reg = <0x4805a000 0x800>,
-				      <0x4805a800 0x800>;
-				reg-names = "tx",
-					    "rx";
-
-				interrupt-parent = <&intc>;
-				interrupts = <67>,
-					     <68>;
-			};
-
-			ssi_port2: ssi-port@4805b000 {
-				compatible = "ti,omap3-ssi-port";
-
-				reg = <0x4805b000 0x800>,
-				      <0x4805b800 0x800>;
-				reg-names = "tx",
-					    "rx";
-
-				interrupt-parent = <&intc>;
-				interrupts = <69>,
-					     <70>;
-			};
-		};
-	};
-};
-
-/include/ "omap3xxx-clocks.dtsi"
diff --git a/src/arm/omap3430-sdp.dts b/src/arm/omap3430-sdp.dts
deleted file mode 100644
index 02f69f4a8fd3..000000000000
--- a/src/arm/omap3430-sdp.dts
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
-
-/ {
-	model = "TI OMAP3430 SDP";
-	compatible = "ti,omap3430-sdp", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	};
-};
-
-#include "twl4030.dtsi"
-#include "twl4030_omap3.dtsi"
-
-&mmc1 {
-	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
-	/*
-	 * S6-3 must be in ON position for 8 bit mode to function
-	 * Else, use 4 bit mode
-	 */
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&gpmc {
-	ranges = <0 0 0x10000000 0x08000000>,
-		 <1 0 0x28000000 0x08000000>,
-		 <2 0 0x20000000 0x10000000>;
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		linux,mtd-name= "intel,pf48f6000m0y1be";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x08000000>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		partition@0 {
-			label = "bootloader-nor";
-			reg = <0 0x40000>;
-		};
-		partition@40000 {
-			label = "params-nor";
-			reg = <0x40000 0x40000>;
-		};
-		partition@80000 {
-			label = "kernel-nor";
-			reg = <0x80000 0x200000>;
-		};
-		partition@280000 {
-			label = "filesystem-nor";
-			reg = <0x240000 0x7d80000>;
-		};
-	};
-
-	nand@1,0 {
-		linux,mtd-name= "micron,mt29f1g08abb";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <1 0 0x08000000>;
-		ti,nand-ecc-opt = "ham1";
-		nand-bus-width = <8>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <36>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <24>;
-		gpmc,adv-wr-off-ns = <36>;
-		gpmc,oe-on-ns = <6>;
-		gpmc,oe-off-ns = <48>;
-		gpmc,we-on-ns = <6>;
-		gpmc,we-off-ns = <30>;
-		gpmc,rd-cycle-ns = <72>;
-		gpmc,wr-cycle-ns = <72>;
-		gpmc,access-ns = <54>;
-		gpmc,wr-access-ns = <30>;
-
-		partition@0 {
-			label = "xloader-nand";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "bootloader-nand";
-			reg = <0x80000 0x140000>;
-		};
-		partition@1c0000 {
-			label = "params-nand";
-			reg = <0x1c0000 0xc0000>;
-		};
-		partition@280000 {
-			label = "kernel-nand";
-			reg = <0x280000 0x500000>;
-		};
-		partition@780000 {
-			label = "filesystem-nand";
-			reg = <0x780000 0x7880000>;
-		};
-	};
-
-	onenand@2,0 {
-		linux,mtd-name= "samsung,kfm2g16q2m-deb8";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <2 0 0x10000000>;
-
-		gpmc,device-width = <2>;
-		gpmc,mux-add-data = <2>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <84>;
-		gpmc,cs-wr-off-ns = <72>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <18>;
-		gpmc,adv-wr-off-ns = <18>;
-		gpmc,oe-on-ns = <30>;
-		gpmc,oe-off-ns = <84>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <42>;
-		gpmc,rd-cycle-ns = <108>;
-		gpmc,wr-cycle-ns = <96>;
-		gpmc,access-ns = <78>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-
-		partition@0 {
-			label = "xloader-onenand";
-			reg = <0 0x80000>;
-		};
-		partition@80000 {
-			label = "bootloader-onenand";
-			reg = <0x80000 0x40000>;
-		};
-		partition@c0000 {
-			label = "params-onenand";
-			reg = <0xc0000 0x20000>;
-		};
-		partition@e0000 {
-			label = "kernel-onenand";
-			reg = <0xe0000 0x200000>;
-		};
-		partition@2e0000 {
-			label = "filesystem-onenand";
-			reg = <0x2e0000 0xfd20000>;
-		};
-	};
-};
diff --git a/src/arm/omap3430es1-clocks.dtsi b/src/arm/omap3430es1-clocks.dtsi
deleted file mode 100644
index 4c22f3a7f813..000000000000
--- a/src/arm/omap3430es1-clocks.dtsi
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Device Tree Source for OMAP3430 ES1 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_clocks {
-	gfx_l3_ck: gfx_l3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0b10>;
-		ti,bit-shift = <0>;
-	};
-
-	gfx_l3_fck: gfx_l3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_ick>;
-		ti,max-div = <7>;
-		reg = <0x0b40>;
-		ti,index-starts-at-one;
-	};
-
-	gfx_l3_ick: gfx_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&gfx_l3_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gfx_cg1_ck: gfx_cg1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&gfx_l3_fck>;
-		reg = <0x0b00>;
-		ti,bit-shift = <1>;
-	};
-
-	gfx_cg2_ck: gfx_cg2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&gfx_l3_fck>;
-		reg = <0x0b00>;
-		ti,bit-shift = <2>;
-	};
-
-	d2d_26m_fck: d2d_26m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <3>;
-	};
-
-	fshostusb_fck: fshostusb_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <5>;
-	};
-
-	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0a00>;
-	};
-
-	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <8>;
-		reg = <0x0a40>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-	};
-
-	ssi_ssr_fck: ssi_ssr_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
-	};
-
-	ssi_sst_fck: ssi_sst_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&ssi_ssr_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	fac_ick: fac_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <8>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ssi_ick: ssi_ick_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <0>;
-	};
-
-	usb_l4_gate_ick: usb_l4_gate_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <5>;
-		reg = <0x0a10>;
-	};
-
-	usb_l4_div_ick: usb_l4_div_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <4>;
-		ti,max-div = <1>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	usb_l4_ick: usb_l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
-	};
-
-	dss1_alwon_fck: dss1_alwon_fck_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m4x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0e00>;
-		ti,set-rate-parent;
-	};
-
-	dss_ick: dss_ick_3430es1 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0e10>;
-		ti,bit-shift = <0>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>;
-	};
-
-	gfx_3430es1_clkdm: gfx_3430es1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck>, <&dss_ick>;
-	};
-
-	d2d_clkdm: d2d_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&d2d_26m_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick>;
-	};
-};
diff --git a/src/arm/omap34xx-hs.dtsi b/src/arm/omap34xx-hs.dtsi
deleted file mode 100644
index 1ff626489546..000000000000
--- a/src/arm/omap34xx-hs.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Disabled modules for secure omaps */
-
-#include "omap34xx.dtsi"
-
-/* Secure omaps have some devices inaccessible depending on the firmware */
-&aes {
-	status = "disabled";
-};
-
-&sham {
-	status = "disabled";
-};
-
-&timer12 {
-	status = "disabled";
-};
diff --git a/src/arm/omap34xx-omap36xx-clocks.dtsi b/src/arm/omap34xx-omap36xx-clocks.dtsi
deleted file mode 100644
index b02017b7630e..000000000000
--- a/src/arm/omap34xx-omap36xx-clocks.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Device Tree Source for OMAP34XX/OMAP36XX clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_clocks {
-	security_l4_ick2: security_l4_ick2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes1_ick: aes1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		ti,bit-shift = <3>;
-		reg = <0x0a14>;
-	};
-
-	rng_ick: rng_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <2>;
-	};
-
-	sha11_ick: sha11_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <1>;
-	};
-
-	des1_ick: des1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <0>;
-	};
-
-	cam_mclk: cam_mclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m5x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0f00>;
-		ti,set-rate-parent;
-	};
-
-	cam_ick: cam_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0f10>;
-		ti,bit-shift = <0>;
-	};
-
-	csi2_96m_fck: csi2_96m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0f00>;
-		ti,bit-shift = <1>;
-	};
-
-	security_l3_ick: security_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pka_ick: pka_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l3_ick>;
-		reg = <0x0a14>;
-		ti,bit-shift = <4>;
-	};
-
-	icr_ick: icr_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <29>;
-	};
-
-	des2_ick: des2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <26>;
-	};
-
-	mspro_ick: mspro_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
-
-	mailboxes_ick: mailboxes_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <7>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sr1_fck: sr1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <6>;
-	};
-
-	sr2_fck: sr2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <7>;
-	};
-
-	sr_l4_ick: sr_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll2_fck: dpll2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <19>;
-		ti,max-div = <7>;
-		reg = <0x0040>;
-		ti,index-starts-at-one;
-	};
-
-	dpll2_ck: dpll2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&dpll2_fck>;
-		reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
-		ti,low-power-stop;
-		ti,lock;
-		ti,low-power-bypass;
-	};
-
-	dpll2_m2_ck: dpll2_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0044>;
-		ti,index-starts-at-one;
-	};
-
-	iva2_ck: iva2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&dpll2_m2_ck>;
-		reg = <0x0000>;
-		ti,bit-shift = <0>;
-	};
-
-	modem_fck: modem_fck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <31>;
-	};
-
-	sad2d_ick: sad2d_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <3>;
-	};
-
-	mad2d_ick: mad2d_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0a18>;
-		ti,bit-shift = <3>;
-	};
-
-	mspro_fck: mspro_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
-	};
-};
-
-&cm_clockdomains {
-	cam_clkdm: cam_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cam_ick>, <&csi2_96m_fck>;
-	};
-
-	iva2_clkdm: iva2_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&iva2_ck>;
-	};
-
-	dpll2_clkdm: dpll2_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll2_ck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
-	};
-
-	d2d_clkdm: d2d_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
-			 <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
-			 <&mspro_fck>;
-	};
-};
diff --git a/src/arm/omap34xx.dtsi b/src/arm/omap34xx.dtsi
deleted file mode 100644
index 3819c1e91591..000000000000
--- a/src/arm/omap34xx.dtsi
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Device Tree Source for OMAP34xx/OMAP35xx SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap3.dtsi"
-
-/ {
-	cpus {
-		cpu@0 {
-			/* OMAP343x/OMAP35xx variants OPP1-5 */
-			operating-points = <
-				/* kHz    uV */
-				125000   975000
-				250000  1075000
-				500000  1200000
-				550000  1270000
-				600000  1350000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
-		};
-	};
-
-	ocp {
-		omap3_pmx_core2: pinmux@480025d8 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x480025d8 0x24>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-	};
-};
-
-&ssi {
-	status = "ok";
-
-	clocks = <&ssi_ssr_fck>,
-		 <&ssi_sst_fck>,
-		 <&ssi_ick>;
-	clock-names = "ssi_ssr_fck",
-		      "ssi_sst_fck",
-		      "ssi_ick";
-};
-
-/include/ "omap34xx-omap36xx-clocks.dtsi"
-/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
deleted file mode 100644
index 080fb3f4e429..000000000000
--- a/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&prm_clocks {
-	corex2_d3_fck: corex2_d3_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&corex2_fck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	corex2_d5_fck: corex2_d5_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&corex2_fck>;
-		clock-mult = <1>;
-		clock-div = <5>;
-	};
-};
-&cm_clocks {
-	dpll5_ck: dpll5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d04>, <0x0d24>, <0x0d4c>, <0x0d34>;
-		ti,low-power-stop;
-		ti,lock;
-	};
-
-	dpll5_m2_ck: dpll5_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll5_ck>;
-		ti,max-div = <31>;
-		reg = <0x0d50>;
-		ti,index-starts-at-one;
-	};
-
-	sgx_gate_fck: sgx_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0b00>;
-	};
-
-	core_d3_ck: core_d3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	core_d4_ck: core_d4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	core_d6_ck: core_d6_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <6>;
-	};
-
-	omap_192m_alwon_fck: omap_192m_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	core_d2_ck: core_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	sgx_mux_fck: sgx_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
-		reg = <0x0b40>;
-	};
-
-	sgx_fck: sgx_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
-	};
-
-	sgx_ick: sgx_ick {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0b10>;
-		ti,bit-shift = <0>;
-	};
-
-	cpefuse_fck: cpefuse_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a08>;
-		ti,bit-shift = <0>;
-	};
-
-	ts_fck: ts_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_32k_fck>;
-		reg = <0x0a08>;
-		ti,bit-shift = <1>;
-	};
-
-	usbtll_fck: usbtll_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&dpll5_m2_ck>;
-		reg = <0x0a08>;
-		ti,bit-shift = <2>;
-	};
-
-	usbtll_ick: usbtll_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a18>;
-		ti,bit-shift = <2>;
-	};
-
-	mmchs3_ick: mmchs3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <30>;
-	};
-
-	mmchs3_fck: mmchs3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <30>;
-	};
-
-	dss1_alwon_fck: dss1_alwon_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,dss-gate-clock";
-		clocks = <&dpll4_m4x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0e00>;
-		ti,set-rate-parent;
-	};
-
-	dss_ick: dss_ick_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dss-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x0e10>;
-		ti,bit-shift = <0>;
-	};
-
-	usbhost_120m_fck: usbhost_120m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll5_m2_ck>;
-		reg = <0x1400>;
-		ti,bit-shift = <1>;
-	};
-
-	usbhost_48m_fck: usbhost_48m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,dss-gate-clock";
-		clocks = <&omap_48m_fck>;
-		reg = <0x1400>;
-		ti,bit-shift = <0>;
-	};
-
-	usbhost_ick: usbhost_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dss-interface-clock";
-		clocks = <&l4_ick>;
-		reg = <0x1410>;
-		ti,bit-shift = <0>;
-	};
-};
-
-&cm_clockdomains {
-	dpll5_clkdm: dpll5_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll5_ck>;
-	};
-
-	sgx_clkdm: sgx_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sgx_ick>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
-			 <&dss1_alwon_fck>, <&dss_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>;
-	};
-
-	usbhost_clkdm: usbhost_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&usbhost_120m_fck>, <&usbhost_48m_fck>,
-			 <&usbhost_ick>;
-	};
-};
diff --git a/src/arm/omap36xx-clocks.dtsi b/src/arm/omap36xx-clocks.dtsi
deleted file mode 100644
index 200ae3a5cbbb..000000000000
--- a/src/arm/omap36xx-clocks.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Device Tree Source for OMAP36xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_clocks {
-	dpll4_ck: dpll4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-per-j-type-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
-	};
-
-	dpll4_m5x2_ck: dpll4_m5x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m5x2_mul_ck>;
-		ti,bit-shift = <0x1e>;
-		reg = <0x0d00>;
-		ti,set-rate-parent;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m2x2_ck: dpll4_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m2x2_mul_ck>;
-		ti,bit-shift = <0x1b>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll3_m3x2_ck: dpll3_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll3_m3x2_mul_ck>;
-		ti,bit-shift = <0xc>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m3x2_ck: dpll4_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m3x2_mul_ck>;
-		ti,bit-shift = <0x1c>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m6x2_ck: dpll4_m6x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,hsdiv-gate-clock";
-		clocks = <&dpll4_m6x2_mul_ck>;
-		ti,bit-shift = <0x1f>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	uart4_fck: uart4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_48m_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <18>;
-	};
-};
-
-&dpll4_m2x2_mul_ck {
-	clock-mult = <1>;
-};
-
-&dpll4_m3x2_mul_ck {
-	clock-mult = <1>;
-};
-
-&dpll4_m4x2_mul_ck {
-	ti,clock-mult = <1>;
-};
-
-&dpll4_m5x2_mul_ck {
-	ti,clock-mult = <1>;
-};
-
-&dpll4_m6x2_mul_ck {
-	clock-mult = <1>;
-};
-
-&cm_clockdomains {
-	dpll4_clkdm: dpll4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll4_ck>;
-	};
-
-	per_clkdm: per_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
-			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
-			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
-			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
-			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
-			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
-			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
-			 <&mcbsp4_ick>, <&uart4_fck>;
-	};
-};
diff --git a/src/arm/omap36xx-hs.dtsi b/src/arm/omap36xx-hs.dtsi
deleted file mode 100644
index 2c7febb0e016..000000000000
--- a/src/arm/omap36xx-hs.dtsi
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Disabled modules for secure omaps */
-
-#include "omap36xx.dtsi"
-
-/* Secure omaps have some devices inaccessible depending on the firmware */
-&aes {
-	status = "disabled";
-};
-
-&sham {
-	status = "disabled";
-};
-
-&timer12 {
-	status = "disabled";
-};
diff --git a/src/arm/omap36xx-omap3430es2plus-clocks.dtsi b/src/arm/omap36xx-omap3430es2plus-clocks.dtsi
deleted file mode 100644
index 877318c28364..000000000000
--- a/src/arm/omap36xx-omap3430es2plus-clocks.dtsi
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Device Tree Source for OMAP34xx/OMAP36xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_clocks {
-	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0a00>;
-	};
-
-	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <8>;
-		reg = <0x0a40>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
-	};
-
-	ssi_ssr_fck: ssi_ssr_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
-	};
-
-	ssi_sst_fck: ssi_sst_fck_3430es2 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&ssi_ssr_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-hsotgusb-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	ssi_l4_ick: ssi_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ssi_ick: ssi_ick_3430es2 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-ssi-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <0>;
-	};
-
-	usim_gate_fck: usim_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&omap_96m_fck>;
-		ti,bit-shift = <9>;
-		reg = <0x0c00>;
-	};
-
-	sys_d2_ck: sys_d2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_96m_d2_fck: omap_96m_d2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_96m_d4_fck: omap_96m_d4_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	omap_96m_d8_fck: omap_96m_d8_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	omap_96m_d10_fck: omap_96m_d10_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll5_m2_d4_ck: dpll5_m2_d4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll5_m2_d8_ck: dpll5_m2_d8_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	dpll5_m2_d16_ck: dpll5_m2_d16_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	dpll5_m2_d20_ck: dpll5_m2_d20_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll5_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <20>;
-	};
-
-	usim_mux_fck: usim_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0c40>;
-		ti,index-starts-at-one;
-	};
-
-	usim_fck: usim_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
-	};
-
-	usim_ick: usim_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <9>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>, <&usim_ick>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&ssi_ick>;
-	};
-};
diff --git a/src/arm/omap36xx.dtsi b/src/arm/omap36xx.dtsi
deleted file mode 100644
index 541704a59a5a..000000000000
--- a/src/arm/omap36xx.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Device Tree Source for OMAP3 SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap3.dtsi"
-
-/ {
-	aliases {
-		serial3 = &uart4;
-	};
-
-	cpus {
-		/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
-		cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				300000  1012500
-				600000  1200000
-				800000  1325000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
-		};
-	};
-
-	ocp {
-		uart4: serial@49042000 {
-			compatible = "ti,omap3-uart";
-			reg = <0x49042000 0x400>;
-			interrupts = <80>;
-			dmas = <&sdma 81 &sdma 82>;
-			dma-names = "tx", "rx";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
-		abb_mpu_iva: regulator-abb-mpu {
-			compatible = "ti,abb-v1";
-			regulator-name = "abb_mpu_iva";
-			#address-cell = <0>;
-			#size-cells = <0>;
-			reg = <0x483072f0 0x8>, <0x48306818 0x4>;
-			reg-names = "base-address", "int-address";
-			ti,tranxdone-status-mask = <0x4000000>;
-			clocks = <&sys_ck>;
-			ti,settling-time = <30>;
-			ti,clock-cycles = <8>;
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			1012500		0	0	0	0	0
-			1200000		0	0	0	0	0
-			1325000		0	0	0	0	0
-			1375000		1	0	0	0	0
-			>;
-		};
-
-		omap3_pmx_core2: pinmux@480025a0 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x480025a0 0x5c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-	};
-};
-
-/* OMAP3630 needs dss_96m_fck for VENC */
-&venc {
-	clocks = <&dss_tv_fck>, <&dss_96m_fck>;
-	clock-names = "fck", "tv_dac_clk";
-};
-
-&ssi {
-	status = "ok";
-
-	clocks = <&ssi_ssr_fck>,
-		 <&ssi_sst_fck>,
-		 <&ssi_ick>;
-	clock-names = "ssi_ssr_fck",
-		      "ssi_sst_fck",
-		      "ssi_ick";
-};
-
-/include/ "omap34xx-omap36xx-clocks.dtsi"
-/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
-/include/ "omap36xx-clocks.dtsi"
diff --git a/src/arm/omap3xxx-clocks.dtsi b/src/arm/omap3xxx-clocks.dtsi
deleted file mode 100644
index e47ff69dcf70..000000000000
--- a/src/arm/omap3xxx-clocks.dtsi
+++ /dev/null
@@ -1,1663 +0,0 @@
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&prm_clocks {
-	virt_16_8m_ck: virt_16_8m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	osc_sys_ck: osc_sys_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
-		reg = <0x0d40>;
-	};
-
-	sys_ck: sys_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&osc_sys_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x1270>;
-		ti,index-starts-at-one;
-	};
-
-	sys_clkout1: sys_clkout1 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&osc_sys_ck>;
-		reg = <0x0d70>;
-		ti,bit-shift = <7>;
-	};
-
-	dpll3_x2_ck: dpll3_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll3_m2x2_ck: dpll3_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_x2_ck: dpll4_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	corex2_fck: corex2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wkup_l4_ick: wkup_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-};
-&scrm_clocks {
-	mcbsp5_mux_fck: mcbsp5_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <4>;
-		reg = <0x02d8>;
-	};
-
-	mcbsp5_fck: mcbsp5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
-	};
-
-	mcbsp1_mux_fck: mcbsp1_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x0274>;
-	};
-
-	mcbsp1_fck: mcbsp1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
-	};
-
-	mcbsp2_mux_fck: mcbsp2_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <6>;
-		reg = <0x0274>;
-	};
-
-	mcbsp2_fck: mcbsp2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
-	};
-
-	mcbsp3_mux_fck: mcbsp3_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		reg = <0x02d8>;
-	};
-
-	mcbsp3_fck: mcbsp3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
-	};
-
-	mcbsp4_mux_fck: mcbsp4_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x02d8>;
-	};
-
-	mcbsp4_fck: mcbsp4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
-	};
-};
-&cm_clocks {
-	dummy_apb_pclk: dummy_apb_pclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	omap_32k_fck: omap_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12m_ck: virt_12m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13m_ck: virt_13m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_38_4m_ck: virt_38_4m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	dpll4_ck: dpll4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-per-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
-	};
-
-	dpll4_m2_ck: dpll4_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <63>;
-		reg = <0x0d48>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m2x2_ck: dpll4_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m2x2_mul_ck>;
-		ti,bit-shift = <0x1b>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	omap_96m_alwon_fck: omap_96m_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll3_ck: dpll3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-core-clock";
-		clocks = <&sys_ck>, <&sys_ck>;
-		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
-	};
-
-	dpll3_m3_ck: dpll3_m3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll3_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <31>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll3_m3x2_ck: dpll3_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll3_m3x2_mul_ck>;
-		ti,bit-shift = <0xc>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	emu_core_alwon_ck: emu_core_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sys_altclk: sys_altclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	mcbsp_clks: mcbsp_clks {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0x0>;
-	};
-
-	dpll3_m2_ck: dpll3_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll3_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <31>;
-		reg = <0x0d40>;
-		ti,index-starts-at-one;
-	};
-
-	core_ck: core_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll3_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll1_fck: dpll1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <19>;
-		ti,max-div = <7>;
-		reg = <0x0940>;
-		ti,index-starts-at-one;
-	};
-
-	dpll1_ck: dpll1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-dpll-clock";
-		clocks = <&sys_ck>, <&dpll1_fck>;
-		reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
-	};
-
-	dpll1_x2_ck: dpll1_x2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll1_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll1_x2m2_ck: dpll1_x2m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll1_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0944>;
-		ti,index-starts-at-one;
-	};
-
-	cm_96m_fck: cm_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_alwon_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	omap_96m_fck: omap_96m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&cm_96m_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0d40>;
-	};
-
-	dpll4_m3_ck: dpll4_m3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <32>;
-		reg = <0x0e40>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m3_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m3x2_ck: dpll4_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m3x2_mul_ck>;
-		ti,bit-shift = <0x1c>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	omap_54m_fck: omap_54m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
-		ti,bit-shift = <5>;
-		reg = <0x0d40>;
-	};
-
-	cm_96m_d2_fck: cm_96m_d2_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cm_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	omap_48m_fck: omap_48m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
-		ti,bit-shift = <3>;
-		reg = <0x0d40>;
-	};
-
-	omap_12m_fck: omap_12m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll4_m4_ck: dpll4_m4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <32>;
-		reg = <0x0e40>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll4_m4_ck>;
-		ti,clock-mult = <2>;
-		ti,clock-div = <1>;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m4x2_ck: dpll4_m4x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m4x2_mul_ck>;
-		ti,bit-shift = <0x1d>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m5_ck: dpll4_m5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <63>;
-		reg = <0x0f40>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll4_m5_ck>;
-		ti,clock-mult = <2>;
-		ti,clock-div = <1>;
-		ti,set-rate-parent;
-	};
-
-	dpll4_m5x2_ck: dpll4_m5x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m5x2_mul_ck>;
-		ti,bit-shift = <0x1e>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	dpll4_m6_ck: dpll4_m6_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <63>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m6_ck>;
-		clock-mult = <2>;
-		clock-div = <1>;
-	};
-
-	dpll4_m6x2_ck: dpll4_m6x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m6x2_mul_ck>;
-		ti,bit-shift = <0x1f>;
-		reg = <0x0d00>;
-		ti,set-bit-to-disable;
-	};
-
-	emu_per_alwon_ck: emu_per_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll4_m6x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	clkout2_src_gate_ck: clkout2_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0d70>;
-	};
-
-	clkout2_src_mux_ck: clkout2_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
-		reg = <0x0d70>;
-	};
-
-	clkout2_src_ck: clkout2_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
-	};
-
-	sys_clkout2: sys_clkout2 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout2_src_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <64>;
-		reg = <0x0d70>;
-		ti,index-power-of-two;
-	};
-
-	mpu_ck: mpu_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll1_x2m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	arm_fck: arm_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mpu_ck>;
-		reg = <0x0924>;
-		ti,max-div = <2>;
-	};
-
-	emu_mpu_alwon_ck: emu_mpu_alwon_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&mpu_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3_ick: l3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <3>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	l4_ick: l4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_ick>;
-		ti,bit-shift = <2>;
-		ti,max-div = <3>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	rm_ick: rm_ick {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <1>;
-		ti,max-div = <3>;
-		reg = <0x0c40>;
-		ti,index-starts-at-one;
-	};
-
-	gpt10_gate_fck: gpt10_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0a00>;
-	};
-
-	gpt10_mux_fck: gpt10_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0a40>;
-	};
-
-	gpt10_fck: gpt10_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
-	};
-
-	gpt11_gate_fck: gpt11_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0a00>;
-	};
-
-	gpt11_mux_fck: gpt11_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0a40>;
-	};
-
-	gpt11_fck: gpt11_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
-	};
-
-	core_96m_fck: core_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mmchs2_fck: mmchs2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <25>;
-	};
-
-	mmchs1_fck: mmchs1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <24>;
-	};
-
-	i2c3_fck: i2c3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <17>;
-	};
-
-	i2c2_fck: i2c2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <16>;
-	};
-
-	i2c1_fck: i2c1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <15>;
-	};
-
-	mcbsp5_gate_fck: mcbsp5_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <10>;
-		reg = <0x0a00>;
-	};
-
-	mcbsp1_gate_fck: mcbsp1_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <9>;
-		reg = <0x0a00>;
-	};
-
-	core_48m_fck: core_48m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcspi4_fck: mcspi4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <21>;
-	};
-
-	mcspi3_fck: mcspi3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <20>;
-	};
-
-	mcspi2_fck: mcspi2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <19>;
-	};
-
-	mcspi1_fck: mcspi1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <18>;
-	};
-
-	uart2_fck: uart2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <14>;
-	};
-
-	uart1_fck: uart1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <13>;
-	};
-
-	core_12m_fck: core_12m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_12m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdq_fck: hdq_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_12m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <22>;
-	};
-
-	core_l3_ick: core_l3_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sdrc_ick: sdrc_ick {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <1>;
-	};
-
-	gpmc_fck: gpmc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&core_l3_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	core_l4_ick: core_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mmchs2_ick: mmchs2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <25>;
-	};
-
-	mmchs1_ick: mmchs1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <24>;
-	};
-
-	hdq_ick: hdq_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <22>;
-	};
-
-	mcspi4_ick: mcspi4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <21>;
-	};
-
-	mcspi3_ick: mcspi3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <20>;
-	};
-
-	mcspi2_ick: mcspi2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <19>;
-	};
-
-	mcspi1_ick: mcspi1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <18>;
-	};
-
-	i2c3_ick: i2c3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <17>;
-	};
-
-	i2c2_ick: i2c2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <16>;
-	};
-
-	i2c1_ick: i2c1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <15>;
-	};
-
-	uart2_ick: uart2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <14>;
-	};
-
-	uart1_ick: uart1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <13>;
-	};
-
-	gpt11_ick: gpt11_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <12>;
-	};
-
-	gpt10_ick: gpt10_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <11>;
-	};
-
-	mcbsp5_ick: mcbsp5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <10>;
-	};
-
-	mcbsp1_ick: mcbsp1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <9>;
-	};
-
-	omapctrl_ick: omapctrl_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <6>;
-	};
-
-	dss_tv_fck: dss_tv_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_54m_fck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <2>;
-	};
-
-	dss_96m_fck: dss_96m_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_96m_fck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <2>;
-	};
-
-	dss2_alwon_fck: dss2_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <1>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	gpt1_gate_fck: gpt1_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0c00>;
-	};
-
-	gpt1_mux_fck: gpt1_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		reg = <0x0c40>;
-	};
-
-	gpt1_fck: gpt1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
-	};
-
-	aes2_ick: aes2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		ti,bit-shift = <28>;
-		reg = <0x0a10>;
-	};
-
-	wkup_32k_fck: wkup_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio1_dbck: gpio1_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&wkup_32k_fck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <3>;
-	};
-
-	sha12_ick: sha12_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <27>;
-	};
-
-	wdt2_fck: wdt2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&wkup_32k_fck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <5>;
-	};
-
-	wdt2_ick: wdt2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <5>;
-	};
-
-	wdt1_ick: wdt1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <4>;
-	};
-
-	gpio1_ick: gpio1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <3>;
-	};
-
-	omap_32ksync_ick: omap_32ksync_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <2>;
-	};
-
-	gpt12_ick: gpt12_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <1>;
-	};
-
-	gpt1_ick: gpt1_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <0>;
-	};
-
-	per_96m_fck: per_96m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_96m_alwon_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_48m_fck: per_48m_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_48m_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	uart3_fck: uart3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_48m_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <11>;
-	};
-
-	gpt2_gate_fck: gpt2_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x1000>;
-	};
-
-	gpt2_mux_fck: gpt2_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		reg = <0x1040>;
-	};
-
-	gpt2_fck: gpt2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
-	};
-
-	gpt3_gate_fck: gpt3_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x1000>;
-	};
-
-	gpt3_mux_fck: gpt3_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x1040>;
-	};
-
-	gpt3_fck: gpt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
-	};
-
-	gpt4_gate_fck: gpt4_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x1000>;
-	};
-
-	gpt4_mux_fck: gpt4_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x1040>;
-	};
-
-	gpt4_fck: gpt4_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
-	};
-
-	gpt5_gate_fck: gpt5_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x1000>;
-	};
-
-	gpt5_mux_fck: gpt5_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x1040>;
-	};
-
-	gpt5_fck: gpt5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
-	};
-
-	gpt6_gate_fck: gpt6_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1000>;
-	};
-
-	gpt6_mux_fck: gpt6_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x1040>;
-	};
-
-	gpt6_fck: gpt6_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
-	};
-
-	gpt7_gate_fck: gpt7_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1000>;
-	};
-
-	gpt7_mux_fck: gpt7_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x1040>;
-	};
-
-	gpt7_fck: gpt7_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
-	};
-
-	gpt8_gate_fck: gpt8_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x1000>;
-	};
-
-	gpt8_mux_fck: gpt8_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x1040>;
-	};
-
-	gpt8_fck: gpt8_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
-	};
-
-	gpt9_gate_fck: gpt9_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x1000>;
-	};
-
-	gpt9_mux_fck: gpt9_mux_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1040>;
-	};
-
-	gpt9_fck: gpt9_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
-	};
-
-	per_32k_alwon_fck: per_32k_alwon_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&omap_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio6_dbck: gpio6_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <17>;
-	};
-
-	gpio5_dbck: gpio5_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <16>;
-	};
-
-	gpio4_dbck: gpio4_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <15>;
-	};
-
-	gpio3_dbck: gpio3_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <14>;
-	};
-
-	gpio2_dbck: gpio2_dbck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <13>;
-	};
-
-	wdt3_fck: wdt3_fck {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <12>;
-	};
-
-	per_l4_ick: per_l4_ick {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l4_ick>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio6_ick: gpio6_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <17>;
-	};
-
-	gpio5_ick: gpio5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <16>;
-	};
-
-	gpio4_ick: gpio4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <15>;
-	};
-
-	gpio3_ick: gpio3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <14>;
-	};
-
-	gpio2_ick: gpio2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <13>;
-	};
-
-	wdt3_ick: wdt3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <12>;
-	};
-
-	uart3_ick: uart3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <11>;
-	};
-
-	uart4_ick: uart4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <18>;
-	};
-
-	gpt9_ick: gpt9_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <10>;
-	};
-
-	gpt8_ick: gpt8_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <9>;
-	};
-
-	gpt7_ick: gpt7_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <8>;
-	};
-
-	gpt6_ick: gpt6_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <7>;
-	};
-
-	gpt5_ick: gpt5_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <6>;
-	};
-
-	gpt4_ick: gpt4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <5>;
-	};
-
-	gpt3_ick: gpt3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <4>;
-	};
-
-	gpt2_ick: gpt2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <3>;
-	};
-
-	mcbsp2_ick: mcbsp2_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <0>;
-	};
-
-	mcbsp3_ick: mcbsp3_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <1>;
-	};
-
-	mcbsp4_ick: mcbsp4_ick {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <2>;
-	};
-
-	mcbsp2_gate_fck: mcbsp2_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <0>;
-		reg = <0x1000>;
-	};
-
-	mcbsp3_gate_fck: mcbsp3_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <1>;
-		reg = <0x1000>;
-	};
-
-	mcbsp4_gate_fck: mcbsp4_gate_fck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x1000>;
-	};
-
-	emu_src_mux_ck: emu_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		reg = <0x1140>;
-	};
-
-	emu_src_ck: emu_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,clkdm-gate-clock";
-		clocks = <&emu_src_mux_ck>;
-	};
-
-	pclk_fck: pclk_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <7>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	pclkx2_fck: pclkx2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	atclk_fck: atclk_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <3>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	traceclk_src_fck: traceclk_src_fck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x1140>;
-	};
-
-	traceclk_fck: traceclk_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&traceclk_src_fck>;
-		ti,bit-shift = <11>;
-		ti,max-div = <7>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	secure_32k_fck: secure_32k_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	gpt12_fck: gpt12_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&secure_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wdt1_fck: wdt1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&secure_32k_fck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>;
-	};
-
-	dpll3_clkdm: dpll3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll3_ck>;
-	};
-
-	dpll1_clkdm: dpll1_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll1_ck>;
-	};
-
-	per_clkdm: per_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
-			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
-			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
-			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
-			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
-			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
-			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
-			 <&mcbsp4_ick>;
-	};
-
-	emu_clkdm: emu_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&emu_src_ck>;
-	};
-
-	dpll4_clkdm: dpll4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll4_ck>;
-	};
-
-	wkup_clkdm: wkup_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
-			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
-			 <&gpt1_ick>;
-	};
-
-	dss_clkdm: dss_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
-	};
-};
diff --git a/src/arm/omap4-cpu-thermal.dtsi b/src/arm/omap4-cpu-thermal.dtsi
deleted file mode 100644
index cb9458feb2e3..000000000000
--- a/src/arm/omap4-cpu-thermal.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Device Tree Source for OMAP4/5 SoC CPU thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-cpu_thermal: cpu_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-
-			/* sensor       ID */
-        thermal-sensors = <&bandgap     0>;
-
-        trips {
-                cpu_alert0: cpu_alert {
-                        temperature = <100000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "passive";
-                };
-                cpu_crit: cpu_crit {
-                        temperature = <125000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "critical";
-                };
-        };
-
-	cooling-maps {
-		map0 {
-			trip = <&cpu_alert0>;
-			cooling-device =
-				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-		};
-	};
-};
diff --git a/src/arm/omap4-duovero-parlor.dts b/src/arm/omap4-duovero-parlor.dts
deleted file mode 100644
index 6dc84d9f9b4c..000000000000
--- a/src/arm/omap4-duovero-parlor.dts
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap4-duovero.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "OMAP4430 Gumstix Duovero on Parlor";
-	compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
-
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led0 {
-			label = "duovero:blue:led0";
-			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;	/* gpio_122 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button0@121 {
-			label = "button0";
-			linux,code = <BTN_0>;
-			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
-			gpio-key,wakeup;
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "d";
-
-		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio_63 */
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-0 = <
-			&led_pins
-			&button_pins
-			&smsc_pins
-	>;
-
-	led_pins: pinmux_led_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
-		>;
-	};
-
-	button_pins: pinmux_button_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* abe_dmic_din2.gpio_121 */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	smsc_pins: pinmux_smsc_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3)		/* gpmc_a20.gpio_44: IRQ */
-			OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a21.gpio_45: nReset */
-			OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enabled */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
-			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
-			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
-		>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <100000>;
-
-	/* optional 1K EEPROM with revision information */
-	eeprom@51 {
-		compatible = "atmel,24c01";
-		reg = <0x51>;
-		pagesize = <8>;
-	};
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-#include "omap-gpmc-smsc911x.dtsi"
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;			/* CS5 */
-
-	ethernet@gpmc {
-		reg = <5 0 0xff>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
-
-		phy-mode = "mii";
-
-		gpmc,cs-on-ns = <10>;
-		gpmc,cs-rd-off-ns = <50>;
-		gpmc,cs-wr-off-ns = <50>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <50>;
-		gpmc,we-on-ns = <15>;
-		gpmc,we-off-ns = <50>;
-		gpmc,rd-cycle-ns = <50>;
-		gpmc,wr-cycle-ns = <50>;
-		gpmc,access-ns = <50>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <35>;
-		gpmc,cycle2cycle-delay-ns = <35>;
-		gpmc,wr-data-mux-bus-ns = <35>;
-		gpmc,wr-access-ns = <50>;
-
-		gpmc,mux-add-data = <2>;
-		gpmc,sync-read;
-		gpmc,sync-write;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,sync-clk-ps = <20000>;
-	};
-};
-
-&dss {
-	status = "ok";
-};
-
-&hdmi {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-		};
-	};
-};
-
diff --git a/src/arm/omap4-duovero.dtsi b/src/arm/omap4-duovero.dtsi
deleted file mode 100644
index e860ccd9d09c..000000000000
--- a/src/arm/omap4-duovero.dtsi
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "omap443x.dtsi"
-
-/ {
-	model = "Gumstix Duovero";
-	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "DuoVero";
-
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias";
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;	/* gpio_62 */
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&hsusb1phy_pins>;
-
-		clocks = <&auxclk3_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* regulator for w2cbw0015 on sdio5 */
-	w2cbw0015_vmmc: w2cbw0015_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&w2cbw0015_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "w2cbw0015";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;		/* gpio_43 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&twl6040_pins
-			&hsusbb1_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_nxt.gpio_160 */
-			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
-		>;
-	};
-
-	hsusb1phy_pins: pinmux_hsusb1phy_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_wait1.gpio_62 */
-		>;
-	};
-
-	w2cbw0015_pins: pinmux_w2cbw0015_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
-			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
-			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_dat0 */
-			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
-			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
-			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
-		>;
-	};
-
-	mmc5_pins: pinmux_mmc5_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk */
-			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_cmd */
-			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_dat0 */
-			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1 */
-			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2 */
-			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3 */
-		>;
-	};
-};
-
-/* PMIC */
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_2N cascaded to gic */
-		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>;		/* gpio_160 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-/* on-board bluetooth / WiFi module */
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-
-	vmmc-supply = <&vmmc>;
-	ti,bus-width = <4>;
-	ti,non-removable;		/* FIXME: use PMIC_MMC detect */
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-/* mmc3 is available to the expansion board */
-
-&mmc4 {
-	status = "disabled";
-};
-
-/* on-board WiFi module */
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc5_pins>;
-
-	vmmc-supply = <&w2cbw0015_vmmc>;
-	ti,bus-width = <4>;
-	ti,non-removable;
-	cap-power-off-card;
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
diff --git a/src/arm/omap4-panda-a4.dts b/src/arm/omap4-panda-a4.dts
deleted file mode 100644
index 133f1b74e8ae..000000000000
--- a/src/arm/omap4-panda-a4.dts
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-#include "omap4-panda-common.dtsi"
-
-/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
diff --git a/src/arm/omap4-panda-common.dtsi b/src/arm/omap4-panda-common.dtsi
deleted file mode 100644
index 8cfa3c8a72b0..000000000000
--- a/src/arm/omap4-panda-common.dtsi
+++ /dev/null
@@ -1,538 +0,0 @@
-/*
- * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include "elpida_ecb240abacn.dtsi"
-
-/ {
-	model = "TI OMAP4 PandaBoard";
-	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	aliases {
-		display0 = &dvi0;
-		display1 = &hdmi0;
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-			&led_wkgpio_pins
-		>;
-
-		heartbeat {
-			label = "pandaboard::status1";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		mmc {
-			label = "pandaboard::status2";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	sound: sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "PandaBoard";
-
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Ext Spk", "HFL",
-			"Ext Spk", "HFR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-
-	/* HS USB Port 1 Power */
-	hsusb1_power: hsusb1_power_reg {
-		compatible = "regulator-fixed";
-		regulator-name = "hsusb1_vbus";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 1 0>;	/* gpio_1 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-		/*
-		 * boot-on is required along with always-on as the
-		 * regulator framework doesn't enable the regulator
-		 * if boot-on is not there.
-		 */
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
-		vcc-supply = <&hsusb1_power>;
-		clocks = <&auxclk3_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* regulator for wl12xx on sdio5 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		digital;
-
-		ddc-i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder@1 {
-		compatible = "ti,tpd12s015";
-
-		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
-			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
-			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector@1 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&dss_dpi_pins
-			&tfp410_pins
-			&dss_hdmi_pins
-			&tpd12s015_pins
-			&hsusbb1_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			0xe0 (PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
-			0x160 (PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			0xca (PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			0x122 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
-			0x124 (PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
-			0x126 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
-			0x128 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
-			0x12a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
-			0x12c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
-			0x12e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
-			0x130 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
-			0x132 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
-			0x134 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
-			0x136 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
-
-			0x174 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
-			0x176 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
-			0x178 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
-			0x17a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
-			0x17c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
-			0x17e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
-			0x180 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
-			0x182 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
-			0x184 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
-			0x186 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
-			0x188 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
-			0x18a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
-			0x18c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
-			0x18e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
-
-			0x190 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
-			0x192 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
-			0x194 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
-		>;
-	};
-
-	tfp410_pins: pinmux_tfp410_pins {
-		pinctrl-single,pins = <
-			0x144 (PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			0x84 (PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	/*
-	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
-	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
-	 */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x26 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			0x2c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
-			0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-			0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
-		>;
-	};
-
-	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: pinmux_wl12xx_pins {
-		pinctrl-single,pins = <
-			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
-			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-};
-
-&omap4_pmx_wkup {
-	led_wkgpio_pins: pinmux_leds_wkpins {
-		pinctrl-single,pins = <
-			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
-			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* IRQ# = 7 */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* IRQ# = 119 */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <100000>;
-
-	/*
-	 * Display monitor features are burnt in their EEPROM as EDID data.
-	 * The EEPROM is connected as I2C slave device.
-	 */
-	eeprom@50 {
-		compatible = "ti,eeprom";
-		reg = <0x50>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&wl12xx_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&emif1 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&emif2 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&uart2 {
-	interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART2_RX>;
-};
-
-&uart3 {
-	interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-};
-
-&uart4 {
-	interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART4_RX>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
-
-&dss {
-	status = "ok";
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&dsi2 {
-	status = "ok";
-	vdd-supply = <&vcxio>;
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
diff --git a/src/arm/omap4-panda-es.dts b/src/arm/omap4-panda-es.dts
deleted file mode 100644
index 816d1c95b592..000000000000
--- a/src/arm/omap4-panda-es.dts
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap4460.dtsi"
-#include "omap4-panda-common.dtsi"
-
-/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
-&sound {
-	ti,model = "PandaBoardES";
-
-	/* Audio routing */
-	ti,audio-routing =
-		"Headset Stereophone", "HSOL",
-		"Headset Stereophone", "HSOR",
-		"Ext Spk", "HFL",
-		"Ext Spk", "HFR",
-		"Line Out", "AUXL",
-		"Line Out", "AUXR",
-		"AFML", "Line In",
-		"AFMR", "Line In";
-};
-
-/* PandaboardES has external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
-
-&omap4_pmx_core {
-	led_gpio_pins: gpio_led_pmx {
-		pinctrl-single,pins = <
-			0xb6 (PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
-		>;
-	};
-};
-
-&led_wkgpio_pins {
-	pinctrl-single,pins = <
-		0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-	>;
-};
-
-&leds {
-	pinctrl-0 = <
-		&led_gpio_pins
-		&led_wkgpio_pins
-	>;
-
-	heartbeat {
-		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
-	};
-	mmc {
-		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&gpio1 {
-	 ti,no-reset-on-init;
-};
diff --git a/src/arm/omap4-panda.dts b/src/arm/omap4-panda.dts
deleted file mode 100644
index 6189a8b77d7f..000000000000
--- a/src/arm/omap4-panda.dts
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-#include "omap4-panda-common.dtsi"
diff --git a/src/arm/omap4-sdp-es23plus.dts b/src/arm/omap4-sdp-es23plus.dts
deleted file mode 100644
index aad5dda0f469..000000000000
--- a/src/arm/omap4-sdp-es23plus.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include "omap4-sdp.dts"
-
-/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
-&dss_hdmi_pins {
-	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
-		>;
-};
diff --git a/src/arm/omap4-sdp.dts b/src/arm/omap4-sdp.dts
deleted file mode 100644
index 3e1da43068f6..000000000000
--- a/src/arm/omap4-sdp.dts
+++ /dev/null
@@ -1,690 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-#include "elpida_ecb240abacn.dtsi"
-
-/ {
-	model = "TI OMAP4 SDP board";
-	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &lcd1;
-		display2 = &hdmi0;
-	};
-
-	vdd_eth: fixedregulator-vdd-eth {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_ETH";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 16 0>;  /* gpio line 48 */
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	vbat: fixedregulator-vbat {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT";
-		regulator-min-microvolt = <3750000>;
-		regulator-max-microvolt = <3750000>;
-		regulator-boot-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		debug0 {
-			label = "omap4:green:debug0";
-			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
-		};
-
-		debug1 {
-			label = "omap4:green:debug1";
-			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
-		};
-
-		debug2 {
-			label = "omap4:green:debug2";
-			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
-		};
-
-		debug3 {
-			label = "omap4:green:debug3";
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
-		};
-
-		debug4 {
-			label = "omap4:green:debug4";
-			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
-		};
-
-		user1 {
-			label = "omap4:blue:user";
-			gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
-		};
-
-		user2 {
-			label = "omap4:red:user";
-			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
-		};
-
-		user3 {
-			label = "omap4:green:user";
-			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
-		};
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-		kpad {
-			label = "omap4::keypad";
-			pwms = <&twl_pwm 0 7812500>;
-			max-brightness = <127>;
-		};
-
-		charging {
-			label = "omap4:green:chrg";
-			pwms = <&twl_pwmled 0 7812500>;
-			max-brightness = <255>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&twl_pwm 1 7812500>;
-		brightness-levels = <
-				0 10 20 30 40
-				50 60 70 80 90
-				100 110 120 127
-				>;
-		default-brightness-level = <13>;
-	};
-
-	sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "SDP4430";
-
-		ti,jack-detection = <1>;
-		ti,mclk-freq = <38400000>;
-
-		ti,mcpdm = <&mcpdm>;
-		ti,dmic = <&dmic>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Earphone Spk", "EP",
-			"Ext Spk", "HFL",
-			"Ext Spk", "HFR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"Vibrator", "VIBRAL",
-			"Vibrator", "VIBRAR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"MAINMIC", "Main Handset Mic",
-			"Main Handset Mic", "Main Mic Bias",
-			"SUBMIC", "Sub Handset Mic",
-			"Sub Handset Mic", "Main Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In",
-			"DMic", "Digital Mic",
-			"Digital Mic", "Digital Mic1 Bias";
-	};
-
-	/* regulator for wl12xx on sdio5 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 22 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	tpd12s015: encoder@0 {
-		compatible = "ti,tpd12s015";
-
-		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
-			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
-			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "c";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&dss_hdmi_pins
-			&tpd12s015_pins
-	>;
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			0xda (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			0xdc (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			0xde (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			0x102 (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			0x104 (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			0x106 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-			0x11c (PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
-			0x11e (PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
-		>;
-	};
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
-			0x160 (PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			0xca (PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-		>;
-	};
-
-	dmic_pins: pinmux_dmic_pins {
-		pinctrl-single,pins = <
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
-			0xd2 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
-			0xd4 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
-			0xd6 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			0xb6 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
-			0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
-			0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
-			0xbc (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			0xf2 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
-			0xf4 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
-			0xf6 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
-			0xf8 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	/* wl12xx GPIO output for WLAN_EN */
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
-		>;
-	};
-
-	/* wl12xx GPIO inputs and SDIO pins */
-	wl12xx_pins: pinmux_wl12xx_pins {
-		pinctrl-single,pins = <
-			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio4 31 0>;  /* gpio line 127 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-
-		/* regulators for vibra motor */
-		vddvibl-supply = <&vbat>;
-		vddvibr-supply = <&vbat>;
-
-		vibra {
-			/* Vibra driver, motor resistance parameters */
-			ti,vibldrv-res = <8>;
-			ti,vibrdrv-res = <3>;
-			ti,viblmotor-res = <10>;
-			ti,vibrmotor-res = <10>;
-		};
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-
-	/*
-	 * Temperature Sensor
-	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
-	 */
-	tmp105@48 {
-		compatible = "ti,tmp105";
-		reg = <0x48>;
-	};
-
-	/*
-	 * Ambient Light Sensor
-	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
-	 */
-	bh1780@29 {
-		compatible = "rohm,bh1780";
-		reg = <0x29>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-
-	/*
-	 * 3-Axis Digital Compass
-	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
-	 */
-	hmc5843@1e {
-		compatible = "honeywell,hmc5843";
-		reg = <0x1e>;
-	};
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-
-	eth@0 {
-		compatible = "ks8851";
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
-		vdd-supply = <&vdd_eth>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vaux1>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&wl12xx_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-};
-
-&emif1 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&emif2 {
-	cs1-used;
-	device-handle = <&elpida_ECB240ABACN>;
-};
-
-&keypad {
-	keypad,num-rows = <8>;
-	keypad,num-columns = <8>;
-	linux,keymap = <0x00000012	/* KEY_E */
-			0x00010013	/* KEY_R */
-			0x00020014	/* KEY_T */
-			0x00030066	/* KEY_HOME */
-			0x0004003f	/* KEY_F5 */
-			0x000500f0	/* KEY_UNKNOWN */
-			0x00060017	/* KEY_I */
-			0x0007002a	/* KEY_LEFTSHIFT */
-			0x01000020	/* KEY_D*/
-			0x01010021	/* KEY_F */
-			0x01020022	/* KEY_G */
-			0x010300e7	/* KEY_SEND */
-			0x01040040	/* KEY_F6 */
-			0x010500f0	/* KEY_UNKNOWN */
-			0x01060025	/* KEY_K */
-			0x0107001c	/* KEY_ENTER */
-			0x0200002d	/* KEY_X */
-			0x0201002e	/* KEY_C */
-			0x0202002f	/* KEY_V */
-			0x0203006b	/* KEY_END */
-			0x02040041	/* KEY_F7 */
-			0x020500f0	/* KEY_UNKNOWN */
-			0x02060034	/* KEY_DOT */
-			0x0207003a	/* KEY_CAPSLOCK */
-			0x0300002c	/* KEY_Z */
-			0x0301004e	/* KEY_KPLUS */
-			0x03020030	/* KEY_B */
-			0x0303003b	/* KEY_F1 */
-			0x03040042	/* KEY_F8 */
-			0x030500f0	/* KEY_UNKNOWN */
-			0x03060018	/* KEY_O */
-			0x03070039	/* KEY_SPACE */
-			0x04000011	/* KEY_W */
-			0x04010015	/* KEY_Y */
-			0x04020016	/* KEY_U */
-			0x0403003c	/* KEY_F2 */
-			0x04040073	/* KEY_VOLUMEUP */
-			0x040500f0	/* KEY_UNKNOWN */
-			0x04060026	/* KEY_L */
-			0x04070069	/* KEY_LEFT */
-			0x0500001f	/* KEY_S */
-			0x05010023	/* KEY_H */
-			0x05020024	/* KEY_J */
-			0x0503003d	/* KEY_F3 */
-			0x05040043	/* KEY_F9 */
-			0x05050072	/* KEY_VOLUMEDOWN */
-			0x05060032	/* KEY_M */
-			0x0507006a	/* KEY_RIGHT */
-			0x06000010	/* KEY_Q */
-			0x0601001e	/* KEY_A */
-			0x06020031	/* KEY_N */
-			0x0603009e	/* KEY_BACK */
-			0x0604000e	/* KEY_BACKSPACE */
-			0x060500f0	/* KEY_UNKNOWN */
-			0x06060019	/* KEY_P */
-			0x06070067	/* KEY_UP */
-			0x07000094	/* KEY_PROG1 */
-			0x07010095	/* KEY_PROG2 */
-			0x070200ca	/* KEY_PROG3 */
-			0x070300cb	/* KEY_PROG4 */
-			0x0704003e	/* KEY_F4 */
-			0x070500f0	/* KEY_UNKNOWN */
-			0x07060160	/* KEY_OK */
-			0x0707006c>;	/* KEY_DOWN */
-	linux,input-no-autorepeat;
-};
-
-&uart2 {
-	interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART2_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART3_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-};
-
-&uart4 {
-	interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			       &omap4_pmx_core OMAP4_UART4_RX>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&dmic {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dmic_pins>;
-	status = "okay";
-};
-
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&dss {
-	status = "ok";
-};
-
-&dsi1 {
-	status = "ok";
-	vdd-supply = <&vcxio>;
-
-	port {
-		dsi1_out_ep: endpoint {
-			remote-endpoint = <&lcd0_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd0: display {
-		compatible = "tpo,taal", "panel-dsi-cm";
-		label = "lcd0";
-
-		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
-
-		port {
-			lcd0_in: endpoint {
-				remote-endpoint = <&dsi1_out_ep>;
-			};
-		};
-	};
-};
-
-&dsi2 {
-	status = "ok";
-	vdd-supply = <&vcxio>;
-
-	port {
-		dsi2_out_ep: endpoint {
-			remote-endpoint = <&lcd1_in>;
-			lanes = <0 1 2 3 4 5>;
-		};
-	};
-
-	lcd1: display {
-		compatible = "tpo,taal", "panel-dsi-cm";
-		label = "lcd1";
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
-
-		port {
-			lcd1_in: endpoint {
-				remote-endpoint = <&dsi2_out_ep>;
-			};
-		};
-	};
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
diff --git a/src/arm/omap4-var-dvk-om44.dts b/src/arm/omap4-var-dvk-om44.dts
deleted file mode 100644
index 458d79fa378b..000000000000
--- a/src/arm/omap4-var-dvk-om44.dts
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap4-var-som-om44.dtsi"
-#include "omap4-var-som-om44-wlan.dtsi"
-#include "omap4-var-om44customboard.dtsi"
-
-/ {
-	model = "Variscite VAR-DVK-OM44";
-	compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-
-	aliases {
-		display0 = &lcd0;
-		display1 = &hdmi0;
-	};
-
-	lcd0: display {
-		compatible = "innolux,at070tn83", "panel-dpi";
-		label = "lcd";
-		panel-timing {
-			clock-frequency = <33333333>;
-
-			hback-porch = <40>;
-			hactive = <800>;
-			hfront-porch = <40>;
-			hsync-len = <48>;
-
-			vback-porch = <29>;
-			vactive = <480>;
-			vfront-porch = <13>;
-			vsync-len = <3>;
-		};
-
-		port {
-			lcd_in: endpoint {
-				remote-endpoint = <&dpi_out>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "gpio-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&backlight_pins>;
-
-		gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */
-	};
-};
-
-&dss {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&lcd_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&dsi2 {
-	status = "okay";
-	vdd-supply = <&vcxio>;
-};
diff --git a/src/arm/omap4-var-om44customboard.dtsi b/src/arm/omap4-var-om44customboard.dtsi
deleted file mode 100644
index f2d2fdb75628..000000000000
--- a/src/arm/omap4-var-om44customboard.dtsi
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_led_pins>;
-
-		led0 {
-			label = "var:green:led0";
-			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1 {
-			label = "var:green:led1";
-			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_key_pins>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user-key@184 {
-			label = "user";
-			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
-			linux,code = <BTN_EXTRA>;
-			gpio-key,wakeup;
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_pins>;
-		label = "hdmi";
-		type = "a";
-
-		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out>;
-			};
-		};
-	};
-};
-
-&omap4_pmx_core {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi1_cs2.uart1_cts */
-			OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1)		/* mcspi1_cs3.uart1_rts */
-			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1)	/* i2c2_scl.uart1_rx */
-			OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1)		/* i2c2_sda.uart1_tx */
-		>;
-	};
-
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
-			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
-			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
-			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
-		>;
-	};
-
-	mcasp_pins: pinmux_mcsasp_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2)		/*  mcbsp2_dr.abe_mcasp_axr */
-		>;
-	};
-
-	dss_dpi_pins: pinmux_dss_dpi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data23 */
-			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data22 */
-			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data21 */
-			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data20 */
-			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data19 */
-			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data18 */
-			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data15 */
-			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data14 */
-			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data13 */
-			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data12 */
-			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data11 */
-			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data10 */
-			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data9 */
-			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data16 */
-			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data17 */
-			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_hsync */
-			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)		/* dispc2_pclk */
-			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_vsync */
-			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_de */
-			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data8 */
-			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data7 */
-			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data6 */
-			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data5 */
-			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data4 */
-			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data3 */
-			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data2 */
-			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data1 */
-			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data0 */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
-		>;
-	};
-
-	mmc5_pins: pinmux_mmc5_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3)		/* abe_mcbsp2_clkx.gpio_110 */
-			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
-		>;
-	};
-
-	gpio_led_pins: pinmux_gpio_led_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3)		/* kpd_col4.gpio_172 */
-			OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)		/* kpd_col5.gpio_173 */
-		>;
-	};
-
-	gpio_key_pins: pinmux_gpio_key_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3)		/* sys_boot0.gpio_184 */
-		>;
-	};
-
-	ks8851_irq_pins: pinmux_ks8851_irq_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3)	/* kpd_col3.gpio_171 */
-		>;
-	};
-
-	hdmi_hpd_pins: pinmux_hdmi_hpd_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
-		>;
-	};
-
-	backlight_pins: pinmux_backlight_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
-		>;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
-
-&mcspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-	status = "okay";
-
-	eth@0 {
-		compatible = "ks8851";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ks8851_irq_pins>;
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */
-	};
-};
-
-&mmc5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc5_pins>;
-	vmmc-supply = <&vbat>;
-	bus-width = <4>;
-	cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */
-	status = "okay";
-};
-
-&dss {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-	vdda-supply = <&vdac>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-		};
-	};
-};
diff --git a/src/arm/omap4-var-som-om44-wlan.dtsi b/src/arm/omap4-var-som-om44-wlan.dtsi
deleted file mode 100644
index cc66af419236..000000000000
--- a/src/arm/omap4-var-som-om44-wlan.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/ {
-	/* regulator for wl12xx on sdio4 */
-	wl12xx_vmmc: wl12xx_vmmc {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_ctrl_pins>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 0>;	/* gpio 43 */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&omap4_pmx_core {
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
-		>;
-	};
-
-	wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a17.gpio_41 (WLAN_IRQ) */
-			OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a18.gpio_42 (BT_EN) */
-			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 (WLAN_EN) */
-		>;
-	};
-
-	mmc4_pins: pinmux_mmc4_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_clk.sdmmc4_clk */
-			OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_simo.sdmmc4_cmd */
-			OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_somi.sdmmc4_dat0 */
-			OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_tx.sdmmc4_dat1 */
-			OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_rx.sdmmc4_dat2 */
-			OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_cs0.sdmmc4_dat3 */
-		>;
-	};
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	status = "okay";
-};
-
-&mmc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc4_pins>;
-	vmmc-supply = <&wl12xx_vmmc>;
-	non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
-	status = "okay";
-};
diff --git a/src/arm/omap4-var-som-om44.dtsi b/src/arm/omap4-var-som-om44.dtsi
deleted file mode 100644
index 062701e1a898..000000000000
--- a/src/arm/omap4-var-som-om44.dtsi
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include "omap4460.dtsi"
-
-/ {
-	model = "Variscite VAR-SOM-OM44";
-	compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	sound: sound@0 {
-		compatible = "ti,abe-twl6040";
-		ti,model = "VAR-SOM-OM44";
-
-		ti,mclk-freq = <38400000>;
-		ti,mcpdm = <&mcpdm>;
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-
-	/* HS USB Host PHY on PORT 1 */
-	hsusb1_phy: hsusb1_phy {
-		compatible = "usb-nop-xceiv";
-		pinctrl-names = "default";
-		pinctrl-0 = <
-			&hsusbb1_phy_clk_pins
-			&hsusbb1_phy_rst_pins
-		>;
-
-		reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
-		vcc-supply = <&vbat>;
-
-		clocks = <&auxclk3_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	vbat: fixedregulator-vbat {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&omap4_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&hsusbb1_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3)		/* fref_clk2_out.gpio_182 */
-			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-		>;
-	};
-
-	tsc2004_pins: pinmux_tsc2004_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs4.gpio_101 (irq) */
-			OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3)		/* gpmc_ncs5.gpio_102 (rst) */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
-		>;
-	};
-
-	hsusbb1_pins: pinmux_hsusbb1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
-		>;
-	};
-
-	hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3)		/* kpd_row2.gpio_177 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-		>;
-	};
-};
-
-&omap4_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&hsusbb1_hub_rst_pins
-		&lan7500_rst_pins
-	>;
-
-	hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0)	/* fref_clk3_out */
-		>;
-	};
-
-	hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk1 */
-		>;
-	};
-
-	lan7500_rst_pins: pinmux_lan7500_rst_pins {
-		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk0 */
-		>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-	};
-};
-
-#include "twl6030.dtsi"
-#include "twl6030_omap4.dtsi"
-
-&vusim {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-always-on;
-};
-
-&i2c2 {
-	status = "disabled";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	touchscreen: tsc2004@48 {
-		compatible = "ti,tsc2004";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tsc2004_pins>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */
-		status = "disabled";
-	};
-
-	tmp105@49 {
-		compatible = "ti,tmp105";
-		reg = <0x49>;
-	};
-
-	eeprom@50 {
-		compatible = "microchip,24c32";
-		reg = <0x50>;
-	};
-};
-
-&i2c4 {
-	status = "disabled";
-};
-
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&gpmc {
-	status = "disabled";
-};
-
-&mcspi1 {
-	status = "disabled";
-};
-
-&mcspi2 {
-	status = "disabled";
-};
-
-&mcspi3 {
-	status = "disabled";
-};
-
-&mcspi4 {
-	status = "disabled";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&vmmc>;
-	bus-width = <4>;
-	ti,non-removable;
-	status = "okay";
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&uart1 {
-	status = "disabled";
-};
-
-&uart2 {
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	status = "okay";
-};
-
-&uart4 {
-	status = "disabled";
-};
-
-&keypad {
-	status = "disabled";
-};
-
-&twl_usb_comparator {
-	usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
-	interface-type = <1>;
-	mode = <3>;
-	power = <50>;
-};
-
-&usbhshost {
-	port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-	phys = <&hsusb1_phy>;
-};
diff --git a/src/arm/omap4-var-som.dts b/src/arm/omap4-var-som.dts
deleted file mode 100644
index b41269e871dd..000000000000
--- a/src/arm/omap4-var-som.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap443x.dtsi"
-
-/ {
-	model = "Variscite OMAP4 SOM";
-	compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	vdd_eth: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDD_ETH";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-
-	twl: twl@48 {
-		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
-		interrupt-parent = <&gic>;
-	};
-};
-
-#include "twl6030.dtsi"
-
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	/*
-	 * Temperature Sensor
-	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
-	 */
-	tmp105@49 {
-		compatible = "ti,tmp105";
-		reg = <0x49>;
-	};
-};
-
-&i2c4 {
-	clock-frequency = <400000>;
-};
-
-&mcspi1 {
-	eth@0 {
-		compatible = "ks8851";
-		spi-max-frequency = <24000000>;
-		reg = <0>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio line 171 */
-		vdd-supply = <&vdd_eth>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmc>;
-	ti,bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	status = "disabled";
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	ti,bus-width = <4>;
-};
diff --git a/src/arm/omap4-var-stk-om44.dts b/src/arm/omap4-var-stk-om44.dts
deleted file mode 100644
index 56b64e618608..000000000000
--- a/src/arm/omap4-var-stk-om44.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap4-var-som-om44.dtsi"
-#include "omap4-var-som-om44-wlan.dtsi"
-#include "omap4-var-om44customboard.dtsi"
-
-/ {
-	model = "Variscite VAR-STK-OM44";
-	compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
-};
diff --git a/src/arm/omap4.dtsi b/src/arm/omap4.dtsi
deleted file mode 100644
index 69408b53200d..000000000000
--- a/src/arm/omap4.dtsi
+++ /dev/null
@@ -1,941 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "ti,omap4430", "ti,omap4";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			next-level-cache = <&L2>;
-			reg = <0x1>;
-		};
-	};
-
-	gic: interrupt-controller@48241000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48241000 0x1000>,
-		      <0x48240100 0x0100>;
-	};
-
-	L2: l2-cache-controller@48242000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x48242000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	local-timer@48240600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		clocks = <&mpu_periphclk>;
-		reg = <0x48240600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap4-mpu";
-			ti,hwmods = "mpu";
-		};
-
-		dsp {
-			compatible = "ti,omap3-c64";
-			ti,hwmods = "dsp";
-		};
-
-		iva {
-			compatible = "ti,ivahd";
-			ti,hwmods = "iva";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP4 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0x44000000 0x1000>,
-		      <0x44800000 0x2000>,
-		      <0x45000000 0x1000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		cm1: cm1@4a004000 {
-			compatible = "ti,omap4-cm1";
-			reg = <0x4a004000 0x2000>;
-
-			cm1_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm1_clockdomains: clockdomains {
-			};
-		};
-
-		prm: prm@4a306000 {
-			compatible = "ti,omap4-prm";
-			reg = <0x4a306000 0x3000>;
-
-			prm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prm_clockdomains: clockdomains {
-			};
-		};
-
-		cm2: cm2@4a008000 {
-			compatible = "ti,omap4-cm2";
-			reg = <0x4a008000 0x3000>;
-
-			cm2_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm2_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@4a30a000 {
-			compatible = "ti,omap4-scrm";
-			reg = <0x4a30a000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@4a304000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4a304000 0x20>;
-			ti,hwmods = "counter_32k";
-		};
-
-		omap4_pmx_core: pinmux@4a100040 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4a100040 0x0196>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
-		};
-		omap4_pmx_wkup: pinmux@4a31e040 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4a31e040 0x0038>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
-		};
-
-		omap4_padconf_global: tisyscon@4a1005a0 {
-			compatible = "syscon";
-			reg = <0x4a1005a0 0x170>;
-		};
-
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0x60 0x4>;
-			syscon = <&omap4_padconf_global>;
-			pbias_mmc_reg: pbias_mmc_omap4 {
-				regulator-name = "pbias_mmc_omap4";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
-		sdma: dma-controller@4a056000 {
-			compatible = "ti,omap4430-sdma";
-			reg = <0x4a056000 0x1000>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
-		};
-
-		gpio1: gpio@4a310000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4a310000 0x200>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@48055000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48055000 0x200>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@48057000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48057000 0x200>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@48059000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48059000 0x200>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@4805b000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805b000 0x200>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio@4805d000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805d000 0x200>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,omap4430-gpmc";
-			reg = <0x50000000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			clocks = <&l3_div_ck>;
-			clock-names = "fck";
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806a000 0x100>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806c000 0x100>;
-			interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48020000 0x100>;
-			interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-
-		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806e000 0x100>;
-			interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
-		hwspinlock: spinlock@4a0f6000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x4a0f6000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48070000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48072000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48060000 0x100>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-		};
-
-		i2c4: i2c@48350000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48350000 0x100>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c4";
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48098000 0x200>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x4809a000 0x200>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480b8000 0x200>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
-			dma-names = "tx0", "rx0";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480ba000 0x200>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x4809c000 0x400>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480b4000 0x400>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480ad000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc4: mmc@480d1000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d1000 0x400>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc4";
-			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc5: mmc@480d5000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d5000 0x400>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc5";
-			ti,needs-special-reset;
-			dmas = <&sdma 59>, <&sdma 60>;
-			dma-names = "tx", "rx";
-		};
-
-		mmu_dsp: mmu@4a066000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x4a066000 0x100>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_dsp";
-		};
-
-		mmu_ipu: mmu@55082000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu";
-			ti,iommu-bus-err-back;
-		};
-
-		wdt2: wdt@4a314000 {
-			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
-			reg = <0x4a314000 0x80>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		mcpdm: mcpdm@40132000 {
-			compatible = "ti,omap4-mcpdm";
-			reg = <0x40132000 0x7f>, /* MPU private access */
-			      <0x49032000 0x7f>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mcpdm";
-			dmas = <&sdma 65>,
-			       <&sdma 66>;
-			dma-names = "up_link", "dn_link";
-			status = "disabled";
-		};
-
-		dmic: dmic@4012e000 {
-			compatible = "ti,omap4-dmic";
-			reg = <0x4012e000 0x7f>, /* MPU private access */
-			      <0x4902e000 0x7f>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "dmic";
-			dmas = <&sdma 67>;
-			dma-names = "up_link";
-			status = "disabled";
-		};
-
-		mcbsp1: mcbsp@40122000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40122000 0xff>, /* MPU private access */
-			      <0x49022000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@40124000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40124000 0xff>, /* MPU private access */
-			      <0x49024000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp2";
-			dmas = <&sdma 17>,
-			       <&sdma 18>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp3: mcbsp@40126000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40126000 0xff>, /* MPU private access */
-			      <0x49026000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3";
-			dmas = <&sdma 19>,
-			       <&sdma 20>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp4: mcbsp@48096000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x48096000 0xff>; /* L4 Interconnect */
-			reg-names = "mpu";
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp4";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		keypad: keypad@4a31c000 {
-			compatible = "ti,omap4-keypad";
-			reg = <0x4a31c000 0x80>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			reg-names = "mpu";
-			ti,hwmods = "kbd";
-		};
-
-		dmm@4e000000 {
-			compatible = "ti,omap4-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <0 113 0x4>;
-			ti,hwmods = "dmm";
-		};
-
-		emif1: emif@4c000000 {
-			compatible = "ti,emif-4d";
-			reg = <0x4c000000 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "emif1";
-			ti,no-idle-on-init;
-			phy-type = <1>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
-		};
-
-		emif2: emif@4d000000 {
-			compatible = "ti,emif-4d";
-			reg = <0x4d000000 0x100>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "emif2";
-			ti,no-idle-on-init;
-			phy-type = <1>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
-		};
-
-		ocp2scp@4a0ad000 {
-			compatible = "ti,omap-ocp2scp";
-			reg = <0x4a0ad000 0x1f>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp_usb_phy";
-			usb2_phy: usb2phy@4a0ad080 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a0ad080 0x58>;
-				ctrl-module = <&omap_control_usb2phy>;
-				clocks = <&usb_phy_cm_clk32k>;
-				clock-names = "wkupclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		mailbox: mailbox@4a0f4000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4a0f4000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <3>;
-			ti,mbox-num-fifos = <8>;
-		};
-
-		timer1: timer@4a318000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4a318000 0x80>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48032000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48032000 0x80>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48034000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x48034000 0x80>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48036000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x48036000 0x80>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@40138000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x40138000 0x80>,
-			      <0x49038000 0x80>;
-			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-		};
-
-		timer6: timer@4013a000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x4013a000 0x80>,
-			      <0x4903a000 0x80>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-		};
-
-		timer7: timer@4013c000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x4013c000 0x80>,
-			      <0x4903c000 0x80>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@4013e000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x4013e000 0x80>,
-			      <0x4903e000 0x80>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			ti,timer-pwm;
-			ti,timer-dsp;
-		};
-
-		timer9: timer@4803e000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x4803e000 0x80>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48086000 0x80>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x48088000 0x80>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		usbhstll: usbhstll@4a062000 {
-			compatible = "ti,usbhs-tll";
-			reg = <0x4a062000 0x1000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "usb_tll_hs";
-		};
-
-		usbhshost: usbhshost@4a064000 {
-			compatible = "ti,usbhs-host";
-			reg = <0x4a064000 0x800>;
-			ti,hwmods = "usb_host_hs";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			clocks = <&init_60m_fclk>,
-				 <&xclk60mhsp1_ck>,
-				 <&xclk60mhsp2_ck>;
-			clock-names = "refclk_60m_int",
-				      "refclk_60m_ext_p1",
-				      "refclk_60m_ext_p2";
-
-			usbhsohci: ohci@4a064800 {
-				compatible = "ti,ohci-omap3";
-				reg = <0x4a064800 0x400>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			usbhsehci: ehci@4a064c00 {
-				compatible = "ti,ehci-omap";
-				reg = <0x4a064c00 0x400>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		omap_control_usb2phy: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usbotg: control-phy@4a00233c {
-			compatible = "ti,control-phy-otghs";
-			reg = <0x4a00233c 0x4>;
-			reg-names = "otghs_control";
-		};
-
-		usb_otg_hs: usb_otg_hs@4a0ab000 {
-			compatible = "ti,omap4-musb";
-			reg = <0x4a0ab000 0x7ff>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc", "dma";
-			ti,hwmods = "usb_otg_hs";
-			usb-phy = <&usb2_phy>;
-			phys = <&usb2_phy>;
-			phy-names = "usb2-phy";
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
-			ctrl-module = <&omap_control_usbotg>;
-		};
-
-		aes: aes@4b501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x4b501000 0xa0>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 111>, <&sdma 110>;
-			dma-names = "tx", "rx";
-		};
-
-		des: des@480a5000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x480a5000 0xa0>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 117>, <&sdma 116>;
-			dma-names = "tx", "rx";
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			ti,tranxdone-status-mask = <0x80>;
-			clocks = <&sys_clkin_ck>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			status = "disabled";
-		};
-
-		abb_iva: regulator-abb-iva {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_iva";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			ti,tranxdone-status-mask = <0x80000000>;
-			clocks = <&sys_clkin_ck>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			status = "disabled";
-		};
-
-		dss: dss@58000000 {
-			compatible = "ti,omap4-dss";
-			reg = <0x58000000 0x80>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&dss_dss_clk>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@58001000 {
-				compatible = "ti,omap4-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss_dss_clk>;
-				clock-names = "fck";
-			};
-
-			rfbi: encoder@58002000  {
-				compatible = "ti,omap4-rfbi";
-				reg = <0x58002000 0x1000>;
-				status = "disabled";
-				ti,hwmods = "dss_rfbi";
-				clocks = <&dss_dss_clk>, <&dss_fck>;
-				clock-names = "fck", "ick";
-			};
-
-			venc: encoder@58003000 {
-				compatible = "ti,omap4-venc";
-				reg = <0x58003000 0x1000>;
-				status = "disabled";
-				ti,hwmods = "dss_venc";
-				clocks = <&dss_tv_clk>;
-				clock-names = "fck";
-			};
-
-			dsi1: encoder@58004000 {
-				compatible = "ti,omap4-dsi";
-				reg = <0x58004000 0x200>,
-				      <0x58004200 0x40>,
-				      <0x58004300 0x20>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi1";
-				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-			};
-
-			dsi2: encoder@58005000 {
-				compatible = "ti,omap4-dsi";
-				reg = <0x58005000 0x200>,
-				      <0x58005200 0x40>,
-				      <0x58005300 0x20>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi2";
-				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-			};
-
-			hdmi: encoder@58006000 {
-				compatible = "ti,omap4-hdmi";
-				reg = <0x58006000 0x200>,
-				      <0x58006200 0x100>,
-				      <0x58006300 0x100>,
-				      <0x58006400 0x1000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-				dmas = <&sdma 76>;
-				dma-names = "audio_tx";
-			};
-		};
-	};
-};
-
-/include/ "omap44xx-clocks.dtsi"
diff --git a/src/arm/omap443x-clocks.dtsi b/src/arm/omap443x-clocks.dtsi
deleted file mode 100644
index 2bd2166f88d3..000000000000
--- a/src/arm/omap443x-clocks.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Device Tree Source for OMAP4 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&prm_clocks {
-	bandgap_fclk: bandgap_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1888>;
-	};
-};
diff --git a/src/arm/omap443x.dtsi b/src/arm/omap443x.dtsi
deleted file mode 100644
index 0adfa1d1ef20..000000000000
--- a/src/arm/omap443x.dtsi
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Device Tree Source for OMAP443x SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap4.dtsi"
-
-/ {
-	cpus {
-		cpu0: cpu@0 {
-			/* OMAP443x variants OPP50-OPPNT */
-			operating-points = <
-				/* kHz    uV */
-				300000  1025000
-				600000  1200000
-				800000  1313000
-				1008000 1375000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <3>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-	};
-
-	ocp {
-		bandgap: bandgap {
-			reg = <0x4a002260 0x4
-			       0x4a00232C 0x4>;
-			compatible = "ti,omap4430-bandgap";
-
-			#thermal-sensor-cells = <0>;
-		};
-	};
-
-	ocp {
-		abb_mpu: regulator-abb-mpu {
-			status = "okay";
-
-			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
-			reg-names = "base-address", "int-address";
-
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			1025000		0	0	0	0	0
-			1200000		0	0	0	0	0
-			1313000		0	0	0	0	0
-			1375000		1	0	0	0	0
-			1389000		1	0	0	0	0
-			>;
-		};
-
-		/* Default unused, just provide register info for record */
-		abb_iva: regulator-abb-iva {
-			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
-			reg-names = "base-address", "int-address";
-		};
-
-	};
-
-};
-
-/include/ "omap443x-clocks.dtsi"
diff --git a/src/arm/omap4460.dtsi b/src/arm/omap4460.dtsi
deleted file mode 100644
index 194f9ef0a009..000000000000
--- a/src/arm/omap4460.dtsi
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Device Tree Source for OMAP4460 SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-#include "omap4.dtsi"
-
-/ {
-	cpus {
-		/* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
-		cpu0: cpu@0 {
-			operating-points = <
-				/* kHz    uV */
-				350000  1025000
-				700000  1200000
-				920000  1313000
-			>;
-			clock-latency = <300000>; /* From legacy driver */
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		ti,hwmods = "debugss";
-	};
-
-	thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-	};
-
-	ocp {
-		bandgap: bandgap {
-			reg = <0x4a002260 0x4
-			       0x4a00232C 0x4
-			       0x4a002378 0x18>;
-			compatible = "ti,omap4460-bandgap";
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
-			gpios = <&gpio3 22 0>; /* tshut */
-
-			#thermal-sensor-cells = <0>;
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			status = "okay";
-
-			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
-			      <0x4A002268 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address";
-
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			1025000		0	0	0	0	0
-			1200000		0	0	0	0	0
-			1313000		0	0	0x100000 0x40000 0
-			1375000		1	0	0	0	0
-			1389000		1	0	0	0	0
-			>;
-		};
-
-		abb_iva: regulator-abb-iva {
-			status = "okay";
-
-			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
-			      <0x4A002268 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address";
-
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
-			950000		0	0	0	0	0
-			1140000		0	0	0	0	0
-			1291000		0	0	0x200000 0	0
-			1375000		1	0	0	0	0
-			1376000		1	0	0	0	0
-			>;
-		};
-	};
-
-};
-
-/include/ "omap446x-clocks.dtsi"
diff --git a/src/arm/omap446x-clocks.dtsi b/src/arm/omap446x-clocks.dtsi
deleted file mode 100644
index be033e9803e9..000000000000
--- a/src/arm/omap446x-clocks.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Device Tree Source for OMAP4 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&prm_clocks {
-	div_ts_ck: div_ts_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l4_wkup_clk_mux_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1888>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	bandgap_ts_fclk: bandgap_ts_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&div_ts_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1888>;
-	};
-};
diff --git a/src/arm/omap44xx-clocks.dtsi b/src/arm/omap44xx-clocks.dtsi
deleted file mode 100644
index c821ff5e9b8d..000000000000
--- a/src/arm/omap44xx-clocks.dtsi
+++ /dev/null
@@ -1,1651 +0,0 @@
-/*
- * Device Tree Source for OMAP4 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm1_clocks {
-	extalt_clkin_ck: extalt_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <59000000>;
-	};
-
-	pad_clks_src_ck: pad_clks_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	pad_clks_ck: pad_clks_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pad_clks_src_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0108>;
-	};
-
-	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	slimbus_src_clk: slimbus_src_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	slimbus_clk: slimbus_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&slimbus_src_clk>;
-		ti,bit-shift = <10>;
-		reg = <0x0108>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	tie_low_clock_ck: tie_low_clock_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60mhsp1_ck: xclk60mhsp1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60mhsp2_ck: xclk60mhsp2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60motg_ck: xclk60motg_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_abe_ck>;
-		reg = <0x01f0>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	abe_24m_fclk: abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	abe_clk: abe_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	aess_fclk: aess_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&abe_clk>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x0528>;
-	};
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x012c>;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m6x2_ck: dpll_core_m6x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	ddrphy_ck: ddrphy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_core_m5x2_ck: dpll_core_m5x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	div_core_ck: div_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_m5x2_ck>;
-		reg = <0x0100>;
-		ti,max-div = <2>;
-	};
-
-	div_iva_hs_clk: div_iva_hs_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_m5x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x01dc>;
-		ti,index-power-of-two;
-	};
-
-	div_mpu_hs_clk: div_mpu_hs_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_m5x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x019c>;
-		ti,index-power-of-two;
-	};
-
-	dpll_core_m4x2_ck: dpll_core_m4x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0138>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dll_clk_div_ck: dll_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_abe_m2_ck: dpll_abe_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_ck>;
-		ti,max-div = <31>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0134>;
-	};
-
-	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0134>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
-	};
-
-	dpll_core_m7x2_ck: dpll_core_m7x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
-		ti,bit-shift = <23>;
-		reg = <0x01ac>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-	};
-
-	dpll_iva_x2_ck: dpll_iva_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_iva_ck>;
-	};
-
-	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01bc>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	per_hs_clk_div_ck: per_hs_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	l3_div_ck: l3_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&div_core_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <2>;
-		reg = <0x0100>;
-	};
-
-	l4_div_ck: l4_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <2>;
-		reg = <0x0100>;
-	};
-
-	lp_clk_div_ck: lp_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	mpu_periphclk: mpu_periphclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_mpu_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	ocp_abe_iclk: ocp_abe_iclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&aess_fclk>;
-		ti,bit-shift = <24>;
-		reg = <0x0528>;
-		ti,dividers = <2>, <1>;
-	};
-
-	per_abe_24m_fclk: per_abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dmic_sync_mux_ck: dmic_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
-		ti,bit-shift = <25>;
-		reg = <0x0538>;
-	};
-
-	func_dmic_abe_gfclk: func_dmic_abe_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0538>;
-	};
-
-	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
-		ti,bit-shift = <25>;
-		reg = <0x0540>;
-	};
-
-	func_mcasp_abe_gfclk: func_mcasp_abe_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0540>;
-	};
-
-	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
-		ti,bit-shift = <25>;
-		reg = <0x0548>;
-	};
-
-	func_mcbsp1_gfclk: func_mcbsp1_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0548>;
-	};
-
-	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
-		ti,bit-shift = <25>;
-		reg = <0x0550>;
-	};
-
-	func_mcbsp2_gfclk: func_mcbsp2_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0550>;
-	};
-
-	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
-		ti,bit-shift = <25>;
-		reg = <0x0558>;
-	};
-
-	func_mcbsp3_gfclk: func_mcbsp3_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0558>;
-	};
-
-	slimbus1_fclk_1: slimbus1_fclk_1 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_24m_clk>;
-		ti,bit-shift = <9>;
-		reg = <0x0560>;
-	};
-
-	slimbus1_fclk_0: slimbus1_fclk_0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&abe_24m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x0560>;
-	};
-
-	slimbus1_fclk_2: slimbus1_fclk_2 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pad_clks_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x0560>;
-	};
-
-	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&slimbus_clk>;
-		ti,bit-shift = <11>;
-		reg = <0x0560>;
-	};
-
-	timer5_sync_mux: timer5_sync_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0568>;
-	};
-
-	timer6_sync_mux: timer6_sync_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0570>;
-	};
-
-	timer7_sync_mux: timer7_sync_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0578>;
-	};
-
-	timer8_sync_mux: timer8_sync_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0580>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0108>;
-	};
-
-	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	dbgclk_mux_ck: dbgclk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
-		reg = <0x0108>;
-	};
-
-	syc_clk_div_ck: syc_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin_ck>;
-		reg = <0x0100>;
-		ti,max-div = <2>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1838>;
-	};
-
-	dmt1_clk_mux: dmt1_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1840>;
-	};
-
-	usim_ck: usim_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m4x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1858>;
-		ti,dividers = <14>, <18>;
-	};
-
-	usim_fclk: usim_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usim_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1858>;
-	};
-
-	pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x1a20>;
-	};
-
-	pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x1a20>;
-	};
-
-	stm_clk_div_ck: stm_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&pmd_stm_clock_mux_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <64>;
-		reg = <0x1a20>;
-		ti,index-power-of-two;
-	};
-
-	trace_clk_div_div_ck: trace_clk_div_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&pmd_trace_clk_mux_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1a20>;
-		ti,dividers = <0>, <1>, <2>, <0>, <4>;
-	};
-
-	trace_clk_div_ck: trace_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,clkdm-gate-clock";
-		clocks = <&trace_clk_div_div_ck>;
-	};
-};
-
-&prm_clockdomains {
-	emu_sys_clkdm: emu_sys_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&trace_clk_div_ck>;
-	};
-};
-
-&cm2_clocks {
-	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x014c>;
-	};
-
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_per_ck>;
-		reg = <0x0150>;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0154>;
-	};
-
-	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
-	};
-
-	dpll_per_m4x2_ck: dpll_per_m4x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m5x2_ck: dpll_per_m5x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m6x2_ck: dpll_per_m6x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0160>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m7x2_ck: dpll_per_m7x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_ck: dpll_usb_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b4>;
-		ti,clock-mult = <1>;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	ducati_clk_mux_ck: ducati_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
-		reg = <0x0100>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_24mc_fclk: func_24mc_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	func_48m_fclk: func_48m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		reg = <0x0108>;
-		ti,dividers = <4>, <8>;
-	};
-
-	func_48mc_fclk: func_48mc_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_64m_fclk: func_64m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m4x2_ck>;
-		reg = <0x0108>;
-		ti,dividers = <2>, <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		reg = <0x0108>;
-		ti,dividers = <2>, <4>;
-	};
-
-	init_60m_fclk: init_60m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	per_abe_nc_fclk: per_abe_nc_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		reg = <0x0108>;
-		ti,max-div = <2>;
-	};
-
-	aes1_fck: aes1_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15a0>;
-	};
-
-	aes2_fck: aes2_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15a8>;
-	};
-
-	dss_sys_clk: dss_sys_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&syc_clk_div_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x1120>;
-	};
-
-	dss_tv_clk: dss_tv_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&extalt_clkin_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x1120>;
-	};
-
-	dss_dss_clk: dss_dss_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m5x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1120>;
-		ti,set-rate-parent;
-	};
-
-	dss_48mhz_clk: dss_48mhz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48mc_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1120>;
-	};
-
-	dss_fck: dss_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x1120>;
-	};
-
-	fdif_fck: fdif_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m4x2_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <4>;
-		reg = <0x1028>;
-		ti,index-power-of-two;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1460>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1468>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1470>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1478>;
-	};
-
-	gpio6_dbclk: gpio6_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1480>;
-	};
-
-	sgx_clk_mux: sgx_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m7x2_ck>, <&dpll_per_m7x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1220>;
-	};
-
-	hsi_fck: hsi_fck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <4>;
-		reg = <0x1338>;
-		ti,index-power-of-two;
-	};
-
-	iss_ctrlclk: iss_ctrlclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_96m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1020>;
-	};
-
-	mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_96m_fclk>, <&per_abe_nc_fclk>;
-		ti,bit-shift = <25>;
-		reg = <0x14e0>;
-	};
-
-	per_mcbsp4_gfclk: per_mcbsp4_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp4_sync_mux_ck>, <&pad_clks_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x14e0>;
-	};
-
-	hsmmc1_fclk: hsmmc1_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
-		ti,bit-shift = <24>;
-		reg = <0x1328>;
-	};
-
-	hsmmc2_fclk: hsmmc2_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
-		ti,bit-shift = <24>;
-		reg = <0x1330>;
-	};
-
-	ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x13e0>;
-	};
-
-	sha2md5_fck: sha2md5_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15c8>;
-	};
-
-	slimbus2_fclk_1: slimbus2_fclk_1 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_abe_24m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1538>;
-	};
-
-	slimbus2_fclk_0: slimbus2_fclk_0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_24mc_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1538>;
-	};
-
-	slimbus2_slimbus_clk: slimbus2_slimbus_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pad_slimbus_core_clks_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x1538>;
-	};
-
-	smartreflex_core_fck: smartreflex_core_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_wkup_clk_mux_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0638>;
-	};
-
-	smartreflex_iva_fck: smartreflex_iva_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_wkup_clk_mux_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0630>;
-	};
-
-	smartreflex_mpu_fck: smartreflex_mpu_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_wkup_clk_mux_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0628>;
-	};
-
-	cm2_dm10_mux: cm2_dm10_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1428>;
-	};
-
-	cm2_dm11_mux: cm2_dm11_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1430>;
-	};
-
-	cm2_dm2_mux: cm2_dm2_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1438>;
-	};
-
-	cm2_dm3_mux: cm2_dm3_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1440>;
-	};
-
-	cm2_dm4_mux: cm2_dm4_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1448>;
-	};
-
-	cm2_dm9_mux: cm2_dm9_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1450>;
-	};
-
-	usb_host_fs_fck: usb_host_fs_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48mc_fclk>;
-		ti,bit-shift = <1>;
-		reg = <0x13d0>;
-	};
-
-	utmi_p1_gfclk: utmi_p1_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&utmi_p1_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1358>;
-	};
-
-	utmi_p2_gfclk: utmi_p2_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&init_60m_fclk>, <&xclk60mhsp2_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&utmi_p2_gfclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <10>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <11>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <12>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_func48mclk: usb_host_hs_func48mclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48mc_fclk>;
-		ti,bit-shift = <15>;
-		reg = <0x1358>;
-	};
-
-	usb_host_hs_fck: usb_host_hs_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <1>;
-		reg = <0x1358>;
-	};
-
-	otg_60m_gfclk: otg_60m_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&utmi_phy_clkout_ck>, <&xclk60motg_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1360>;
-	};
-
-	usb_otg_hs_xclk: usb_otg_hs_xclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&otg_60m_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1360>;
-	};
-
-	usb_otg_hs_ick: usb_otg_hs_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x1360>;
-	};
-
-	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <10>;
-		reg = <0x1368>;
-	};
-
-	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1368>;
-	};
-
-	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&init_60m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1368>;
-	};
-
-	usb_tll_hs_ick: usb_tll_hs_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_div_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x1368>;
-	};
-};
-
-&cm2_clockdomains {
-	l3_init_clkdm: l3_init_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_usb_ck>, <&usb_host_fs_fck>;
-	};
-};
-
-&scrm_clocks {
-	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_ck: auxclk0_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
-	};
-
-	auxclk0_ck: auxclk0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk0_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0310>;
-	};
-
-	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_ck: auxclk1_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
-	};
-
-	auxclk1_ck: auxclk1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk1_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0314>;
-	};
-
-	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_ck: auxclk2_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
-	};
-
-	auxclk2_ck: auxclk2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk2_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0318>;
-	};
-
-	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_ck: auxclk3_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
-	};
-
-	auxclk3_ck: auxclk3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk3_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x031c>;
-	};
-
-	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_ck: auxclk4_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
-	};
-
-	auxclk4_ck: auxclk4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk4_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0320>;
-	};
-
-	auxclk5_src_gate_ck: auxclk5_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0324>;
-	};
-
-	auxclk5_src_mux_ck: auxclk5_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0324>;
-	};
-
-	auxclk5_src_ck: auxclk5_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
-	};
-
-	auxclk5_ck: auxclk5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk5_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0324>;
-	};
-
-	auxclkreq0_ck: auxclkreq0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0210>;
-	};
-
-	auxclkreq1_ck: auxclkreq1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0214>;
-	};
-
-	auxclkreq2_ck: auxclkreq2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0218>;
-	};
-
-	auxclkreq3_ck: auxclkreq3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x021c>;
-	};
-
-	auxclkreq4_ck: auxclkreq4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0220>;
-	};
-
-	auxclkreq5_ck: auxclkreq5_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0224>;
-	};
-};
diff --git a/src/arm/omap5-cm-t54.dts b/src/arm/omap5-cm-t54.dts
deleted file mode 100644
index b8698ca68647..000000000000
--- a/src/arm/omap5-cm-t54.dts
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * Support for CompuLab CM-T54
- */
-/dts-v1/;
-
-#include "omap5.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "CompuLab CM-T54";
-	compatible = "compulab,omap5-cm-t54", "ti,omap5";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2048 MB */
-	};
-
-	vmmcsd_fixed: fixed-regulator-mmcsd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
-		compatible = "regulator-fixed";
-		regulator-name = "vwlan_pdn_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&ldo2_reg>;
-		gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>;   /* gpio4_109 */
-		startup-delay-us = <1000>;
-		enable-active-high;
-	};
-
-	vwlan_fixed: fixed-regulator-vwlan {
-		compatible = "regulator-fixed";
-		regulator-name = "vwlan_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vwlan_pdn_fixed>;
-		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;   /* gpio4_110 */
-		startup-delay-us = <1000>;
-		enable-active-high;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
-	};
-
-	/* HS USB Host PHY on PORT 3 */
-	hsusb3_phy: hsusb3_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@1 {
-			label = "Heartbeat";
-			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-};
-
-&omap5_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&led_gpio_pins
-			&usbhost_pins
-	>;
-
-	led_gpio_pins: pinmux_led_gpio_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
-			OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
-			OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
-			OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
-			OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
-			OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
-			OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
-			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
-			OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
-			OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
-			OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
-			OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
-			OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
-			OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
-			OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
-			OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
-			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
-			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
-			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
-			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
-			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
-		>;
-	};
-
-	wlan_gpios_pins: pinmux_wlan_gpios_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */
-			OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */
-		>;
-	};
-
-	usbhost_pins: pinmux_usbhost_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_strobe */
-			OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_data */
-
-			OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_strobe */
-			OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_data */
-
-			OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
-			OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&ldo9_reg>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&mmc3_pins
-		&wlan_gpios_pins
-	>;
-	vmmc-supply = <&vwlan_fixed>;
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	at24@50 {
-		compatible = "at24,24c02";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
-	palmas: palmas@48 {
-		compatible = "ti,palmas";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
-		interrupt-parent = <&gic>;
-		reg = <0x48>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,system-power-controller;
-
-		extcon_usb3: palmas_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			ti,wakeup;
-		};
-
-		rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&palmas>;
-			interrupts = <8 IRQ_TYPE_NONE>;
-		};
-
-		palmas_pmic {
-			compatible = "ti,palmas-pmic";
-			interrupt-parent = <&palmas>;
-			interrupts = <14 IRQ_TYPE_NONE>;
-			interrupt-name = "short-irq";
-
-			ti,ldo6-vibrator;
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_OPP_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_OPP_MM */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_DDR3 - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_OPP_CORE */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDA_2v1_AUD over VDD_2v1 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					ti,smps-range = <0x80>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out2_reg: smps10_out2 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out2";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out1_reg: smps10_out1 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out1";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-				};
-
-				ldo1_reg: ldo1 {
-					/* VDDAPHY_CAM: vdda_csiport */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_3V3_WLAN */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					startup-delay-us = <1000>;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VCC_1V5_AUD */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: ldo6 {
-					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
-					regulator-name = "ldo6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo7_reg: ldo7 {
-					/* VDD_VPP: vpp1 */
-					regulator-name = "ldo7";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					/* Only for efuse reprograming! */
-					status = "disabled";
-				};
-
-				ldo8_reg: ldo8 {
-					/* VDD_3v0: Does not go anywhere */
-					regulator-name = "ldo8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo9_reg: ldo9 {
-					/* VCC_DV_SDIO: vdds_sdcard */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3250000>;
-					regulator-max-microvolt = <3250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				regen3_reg: regen3 {
-					/* REGEN3 controls LDO9 supply to card */
-					regulator-name = "regen3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-};
-
-&usbhshost {
-	port2-mode = "ehci-hsic";
-	port3-mode = "ehci-hsic";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy &hsusb3_phy>;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
diff --git a/src/arm/omap5-core-thermal.dtsi b/src/arm/omap5-core-thermal.dtsi
deleted file mode 100644
index 19212ac6eef0..000000000000
--- a/src/arm/omap5-core-thermal.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Device Tree Source for OMAP543x SoC CORE thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-core_thermal: core_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     2>;
-
-	trips {
-		core_crit: core_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/src/arm/omap5-gpu-thermal.dtsi b/src/arm/omap5-gpu-thermal.dtsi
deleted file mode 100644
index 1b87aca88b77..000000000000
--- a/src/arm/omap5-gpu-thermal.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Device Tree Source for OMAP543x SoC GPU thermal
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-gpu_thermal: gpu_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <1000>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     1>;
-
-	trips {
-		gpu_crit: gpu_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/src/arm/omap5-sbc-t54.dts b/src/arm/omap5-sbc-t54.dts
deleted file mode 100644
index aa98fea3f2b3..000000000000
--- a/src/arm/omap5-sbc-t54.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Suppport for CompuLab SBC-T54 with CM-T54
- */
-
-#include "omap5-cm-t54.dts"
-
-/ {
-	model = "CompuLab SBC-T54 with CM-T54";
-	compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
-};
-
-&omap5_pmx_core {
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
-			OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
-		>;
-	};
-
-	mmc1_aux_pins: pinmux_mmc1_aux_pins {
-		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */
-			OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */
-		>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&mmc1_pins
-		&mmc1_aux_pins
-	>;
-	cd-inverted;
-	wp-inverted;
-	cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */
-	wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-
-	at24@50 {
-		compatible = "at24,24c02";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-};
diff --git a/src/arm/omap5-uevm.dts b/src/arm/omap5-uevm.dts
deleted file mode 100644
index 159720d6c956..000000000000
--- a/src/arm/omap5-uevm.dts
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "omap5.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	model = "TI OMAP5 uEVM board";
-	compatible = "ti,omap5-uevm", "ti,omap5";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2032 MB */
-	};
-
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	vmmcsd_fixed: fixedregulator-mmcsd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
-		clocks = <&auxclk1_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* HS USB Host PHY on PORT 3 */
-	hsusb3_phy: hsusb3_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@1 {
-			label = "omap5:blue:usr1";
-			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	tpd12s015: encoder@0 {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
-			<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
-			<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "b";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	sound: sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "omap5-uevm";
-
-		ti,mclk-freq = <19200000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-};
-
-&omap5_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&usbhost_pins
-			&led_gpio_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			0x17e (PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
-			0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
-			0x160 (PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
-			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
-			0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
-			0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
-			0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
-			0x158 (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
-			0x15a (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			0x184 (PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
-			0x186 (PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
-		>;
-	};
-
-	mcspi2_pins: pinmux_mcspi2_pins {
-		pinctrl-single,pins = <
-			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
-			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
-			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
-		>;
-	};
-
-	mcspi3_pins: pinmux_mcspi3_pins {
-		pinctrl-single,pins = <
-			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
-			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
-			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
-			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
-		>;
-	};
-
-	mcspi4_pins: pinmux_mcspi4_pins {
-		pinctrl-single,pins = <
-			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_clk */
-			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_simo */
-			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi4_somi */
-			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi4_cs0 */
-		>;
-	};
-
-	usbhost_pins: pinmux_usbhost_pins {
-		pinctrl-single,pins = <
-			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
-			0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
-
-			0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
-			0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
-
-			0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
-			0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
-		>;
-	};
-
-	led_gpio_pins: pinmux_led_gpio_pins {
-		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
-			0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
-			0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
-			0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
-			0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
-		>;
-	};
-
-	uart5_pins: pinmux_uart5_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
-			0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
-			0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
-			0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			0x0fc (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x100 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
-			0x102 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
-		>;
-	};
-};
-
-&omap5_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&usbhost_wkup_pins
-	>;
-
-	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
-		pinctrl-single,pins = <
-			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo9_reg>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	palmas: palmas@48 {
-		compatible = "ti,palmas";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
-		interrupt-parent = <&gic>;
-		reg = <0x48>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,system-power-controller;
-
-		extcon_usb3: palmas_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			ti,wakeup;
-		};
-
-		clk32kgaudio: palmas_clk32k@1 {
-			compatible = "ti,palmas-clk32kgaudio";
-			#clock-cells = <0>;
-		};
-
-		palmas_pmic {
-			compatible = "ti,palmas-pmic";
-			interrupt-parent = <&palmas>;
-			interrupts = <14 IRQ_TYPE_NONE>;
-			interrupt-name = "short-irq";
-
-			ti,ldo6-vibrator;
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_OPP_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_OPP_MM */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_DDR3 - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_OPP_CORE */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDA_2v1_AUD over VDD_2v1 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2100000>;
-					ti,smps-range = <0x80>;
-				};
-
-				smps10_out2_reg: smps10_out2 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out2";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out1_reg: smps10_out1 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out1";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-				};
-
-				ldo1_reg: ldo1 {
-					/* VDDAPHY_CAM: vdda_csiport */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VCC_2V8_DISP: Does not go anywhere */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDAPHY_MDM: vdda_lli */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					/* Only if Modem is used */
-					status = "disabled";
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: ldo6 {
-					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
-					regulator-name = "ldo6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo7_reg: ldo7 {
-					/* VDD_VPP: vpp1 */
-					regulator-name = "ldo7";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					/* Only for efuse reprograming! */
-					status = "disabled";
-				};
-
-				ldo8_reg: ldo8 {
-					/* VDD_3v0: Does not go anywhere */
-					regulator-name = "ldo8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo9_reg: ldo9 {
-					/* VCC_DV_SDIO: vdds_sdcard */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3250000>;
-					regulator-max-microvolt = <3250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				regen3_reg: regen3 {
-					/* REGEN3 controls LDO9 supply to card */
-					regulator-name = "regen3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
-		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio5 13 0>;  /* gpio line 141 */
-
-		vio-supply = <&smps7_reg>;
-		v2v1-supply = <&smps9_reg>;
-		enable-active-high;
-
-		clocks = <&clk32kgaudio>;
-		clock-names = "clk32k";
-	};
-};
-
-&i2c5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins>;
-
-	clock-frequency = <400000>;
-
-	gpio9: gpio@22 {
-		compatible = "ti,tca6424";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&usbhshost {
-	port2-mode = "ehci-hsic";
-	port3-mode = "ehci-hsic";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy &hsusb3_phy>;
-};
-
-&usb3 {
-	extcon = <&extcon_usb3>;
-	vbus-supply = <&smps10_out1_reg>;
-};
-
-&mcspi1 {
-
-};
-
-&mcspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
-};
-
-&mcspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi3_pins>;
-};
-
-&mcspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi4_pins>;
-};
-
-&uart1 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&uart3_pins>;
-};
-
-&uart5 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&uart5_pins>;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
-
-&dss {
-	status = "ok";
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&ldo4_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
diff --git a/src/arm/omap5.dtsi b/src/arm/omap5.dtsi
deleted file mode 100644
index fc8df1739f39..000000000000
--- a/src/arm/omap5.dtsi
+++ /dev/null
@@ -1,1053 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * Based on "omap4.dtsi"
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	compatible = "ti,omap5";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		i2c4 = &i2c5;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000 1060000
-				1500000 1250000
-			>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-		};
-	};
-
-	thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-		#include "omap5-gpu-thermal.dtsi"
-		#include "omap5-core-thermal.dtsi"
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		/* PPI secure/nonsecure IRQ */
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	gic: interrupt-controller@48211000 {
-		compatible = "arm,cortex-a15-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap5-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the OMAP3 interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0x44000000 0x2000>,
-		      <0x44800000 0x3000>,
-		      <0x45000000 0x4000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		prm: prm@4ae06000 {
-			compatible = "ti,omap5-prm";
-			reg = <0x4ae06000 0x3000>;
-
-			prm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prm_clockdomains: clockdomains {
-			};
-		};
-
-		cm_core_aon: cm_core_aon@4a004000 {
-			compatible = "ti,omap5-cm-core-aon";
-			reg = <0x4a004000 0x2000>;
-
-			cm_core_aon_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_core_aon_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@4ae0a000 {
-			compatible = "ti,omap5-scrm";
-			reg = <0x4ae0a000 0x2000>;
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		cm_core: cm_core@4a008000 {
-			compatible = "ti,omap5-cm-core";
-			reg = <0x4a008000 0x3000>;
-
-			cm_core_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cm_core_clockdomains: clockdomains {
-			};
-		};
-
-		counter32k: counter@4ae04000 {
-			compatible = "ti,omap-counter32k";
-			reg = <0x4ae04000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
-
-		omap5_pmx_core: pinmux@4a002840 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4a002840 0x01b6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
-		};
-		omap5_pmx_wkup: pinmux@4ae0c840 {
-			compatible = "ti,omap4-padconf", "pinctrl-single";
-			reg = <0x4ae0c840 0x0038>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0x7fff>;
-		};
-
-		omap5_padconf_global: tisyscon@4a002da0 {
-			compatible = "syscon";
-			reg = <0x4A002da0 0xec>;
-		};
-
-		pbias_regulator: pbias_regulator {
-			compatible = "ti,pbias-omap";
-			reg = <0x60 0x4>;
-			syscon = <&omap5_padconf_global>;
-			pbias_mmc_reg: pbias_mmc_omap5 {
-				regulator-name = "pbias_mmc_omap5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-
-		sdma: dma-controller@4a056000 {
-			compatible = "ti,omap4430-sdma";
-			reg = <0x4a056000 0x1000>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			#dma-channels = <32>;
-			#dma-requests = <127>;
-		};
-
-		gpio1: gpio@4ae10000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4ae10000 0x200>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@48055000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48055000 0x200>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@48057000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48057000 0x200>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@48059000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48059000 0x200>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@4805b000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805b000 0x200>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio@4805d000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805d000 0x200>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio7: gpio@48051000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48051000 0x200>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio7";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio8: gpio@48053000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48053000 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio8";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,omap4430-gpmc";
-			reg = <0x50000000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48070000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48072000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48060000 0x100>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-		};
-
-		i2c4: i2c@4807a000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807a000 0x100>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c4";
-		};
-
-		i2c5: i2c@4807c000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807c000 0x100>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c5";
-		};
-
-		hwspinlock: spinlock@4a0f6000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x4a0f6000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48098000 0x200>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x4809a000 0x200>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480b8000 0x200>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
-			dma-names = "tx0", "rx0";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480ba000 0x200>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-		};
-
-		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806a000 0x100>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806c000 0x100>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48020000 0x100>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-
-		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806e000 0x100>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
-		uart5: serial@48066000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48066000 0x100>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-		};
-
-		uart6: serial@48068000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48068000 0x100>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x4809c000 0x400>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480b4000 0x400>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480ad000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc4: mmc@480d1000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d1000 0x400>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc4";
-			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc5: mmc@480d5000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d5000 0x400>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc5";
-			ti,needs-special-reset;
-			dmas = <&sdma 59>, <&sdma 60>;
-			dma-names = "tx", "rx";
-		};
-
-		mmu_dsp: mmu@4a066000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x4a066000 0x100>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_dsp";
-		};
-
-		mmu_ipu: mmu@55082000 {
-			compatible = "ti,omap4-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu";
-			ti,iommu-bus-err-back;
-		};
-
-		keypad: keypad@4ae1c000 {
-			compatible = "ti,omap4-keypad";
-			reg = <0x4ae1c000 0x400>;
-			ti,hwmods = "kbd";
-		};
-
-		mcpdm: mcpdm@40132000 {
-			compatible = "ti,omap4-mcpdm";
-			reg = <0x40132000 0x7f>, /* MPU private access */
-			      <0x49032000 0x7f>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mcpdm";
-			dmas = <&sdma 65>,
-			       <&sdma 66>;
-			dma-names = "up_link", "dn_link";
-			status = "disabled";
-		};
-
-		dmic: dmic@4012e000 {
-			compatible = "ti,omap4-dmic";
-			reg = <0x4012e000 0x7f>, /* MPU private access */
-			      <0x4902e000 0x7f>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "dmic";
-			dmas = <&sdma 67>;
-			dma-names = "up_link";
-			status = "disabled";
-		};
-
-		mcbsp1: mcbsp@40122000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40122000 0xff>, /* MPU private access */
-			      <0x49022000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp1";
-			dmas = <&sdma 33>,
-			       <&sdma 34>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp2: mcbsp@40124000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40124000 0xff>, /* MPU private access */
-			      <0x49024000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp2";
-			dmas = <&sdma 17>,
-			       <&sdma 18>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mcbsp3: mcbsp@40126000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x40126000 0xff>, /* MPU private access */
-			      <0x49026000 0xff>; /* L3 Interconnect */
-			reg-names = "mpu", "dma";
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp3";
-			dmas = <&sdma 19>,
-			       <&sdma 20>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mailbox: mailbox@4a0f4000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4a0f4000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox";
-			ti,mbox-num-users = <3>;
-			ti,mbox-num-fifos = <8>;
-		};
-
-		timer1: timer@4ae18000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4ae18000 0x80>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48032000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48032000 0x80>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48034000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48034000 0x80>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48036000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48036000 0x80>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@40138000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x40138000 0x80>,
-			      <0x49038000 0x80>;
-			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer5";
-			ti,timer-dsp;
-			ti,timer-pwm;
-		};
-
-		timer6: timer@4013a000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4013a000 0x80>,
-			      <0x4903a000 0x80>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer6";
-			ti,timer-dsp;
-			ti,timer-pwm;
-		};
-
-		timer7: timer@4013c000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4013c000 0x80>,
-			      <0x4903c000 0x80>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer7";
-			ti,timer-dsp;
-		};
-
-		timer8: timer@4013e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4013e000 0x80>,
-			      <0x4903e000 0x80>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			ti,timer-dsp;
-			ti,timer-pwm;
-		};
-
-		timer9: timer@4803e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4803e000 0x80>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48086000 0x80>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48088000 0x80>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		wdt2: wdt@4ae14000 {
-			compatible = "ti,omap5-wdt", "ti,omap3-wdt";
-			reg = <0x4ae14000 0x80>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <0 113 0x4>;
-			ti,hwmods = "dmm";
-		};
-
-		emif1: emif@4c000000 {
-			compatible	= "ti,emif-4d5";
-			ti,hwmods	= "emif1";
-			ti,no-idle-on-init;
-			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
-			reg = <0x4c000000 0x400>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
-		};
-
-		emif2: emif@4d000000 {
-			compatible	= "ti,emif-4d5";
-			ti,hwmods	= "emif2";
-			ti,no-idle-on-init;
-			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
-			reg = <0x4d000000 0x400>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
-		};
-
-		omap_control_usb2phy: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
-		usb3: omap_dwc3@4a020000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss";
-			reg = <0x4a020000 0x10000>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			dwc3@4a030000 {
-				compatible = "snps,dwc3";
-				reg = <0x4a030000 0x10000>;
-				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy>, <&usb3_phy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "peripheral";
-				tx-fifo-resize;
-			};
-		};
-
-		ocp2scp@4a080000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x4a080000 0x20>;
-			ranges;
-			ti,hwmods = "ocp2scp1";
-			usb2_phy: usb2phy@4a084000 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a084000 0x7c>;
-				ctrl-module = <&omap_control_usb2phy>;
-				clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-			};
-
-			usb3_phy: usb3phy@4a084400 {
-				compatible = "ti,omap-usb3";
-				reg = <0x4a084400 0x80>,
-				      <0x4a084800 0x64>,
-				      <0x4a084c00 0x40>;
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy>;
-				clocks = <&usb_phy_cm_clk32k>,
-					 <&sys_clkin>,
-					 <&usb_otg_ss_refclk960m>;
-				clock-names =	"wkupclk",
-						"sysclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		usbhstll: usbhstll@4a062000 {
-			compatible = "ti,usbhs-tll";
-			reg = <0x4a062000 0x1000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "usb_tll_hs";
-		};
-
-		usbhshost: usbhshost@4a064000 {
-			compatible = "ti,usbhs-host";
-			reg = <0x4a064000 0x800>;
-			ti,hwmods = "usb_host_hs";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			clocks = <&l3init_60m_fclk>,
-				 <&xclk60mhsp1_ck>,
-				 <&xclk60mhsp2_ck>;
-			clock-names = "refclk_60m_int",
-				      "refclk_60m_ext_p1",
-				      "refclk_60m_ext_p2";
-
-			usbhsohci: ohci@4a064800 {
-				compatible = "ti,ohci-omap3";
-				reg = <0x4a064800 0x400>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			usbhsehci: ehci@4a064c00 {
-				compatible = "ti,ehci-omap";
-				reg = <0x4a064c00 0x400>;
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		bandgap: bandgap@4a0021e0 {
-			reg = <0x4a0021e0 0xc
-			       0x4a00232c 0xc
-			       0x4a002380 0x2c
-			       0x4a0023C0 0x3c>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			compatible = "ti,omap5430-bandgap";
-
-			#thermal-sensor-cells = <1>;
-		};
-
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin>;
-			clock-names = "sysclk";
-		};
-
-		/* OCP2SCP3 */
-		ocp2scp@4a090000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x4a090000 0x20>;
-			ranges;
-			ti,hwmods = "ocp2scp3";
-			sata_phy: phy@4a096000 {
-				compatible = "ti,phy-pipe3-sata";
-				reg = <0x4A096000 0x80>, /* phy_rx */
-				      <0x4A096400 0x64>, /* phy_tx */
-				      <0x4A096800 0x40>; /* pll_ctrl */
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin>;
-				clock-names = "sysclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&sata_ref_clk>;
-			ti,hwmods = "sata";
-		};
-
-		dss: dss@58000000 {
-			compatible = "ti,omap5-dss";
-			reg = <0x58000000 0x80>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&dss_dss_clk>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@58001000 {
-				compatible = "ti,omap5-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss_dss_clk>;
-				clock-names = "fck";
-			};
-
-			dsi1: encoder@58004000 {
-				compatible = "ti,omap5-dsi";
-				reg = <0x58004000 0x200>,
-				      <0x58004200 0x40>,
-				      <0x58004300 0x40>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi1";
-				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-			};
-
-			dsi2: encoder@58005000 {
-				compatible = "ti,omap5-dsi";
-				reg = <0x58009000 0x200>,
-				      <0x58009200 0x40>,
-				      <0x58009300 0x40>;
-				reg-names = "proto", "phy", "pll";
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_dsi2";
-				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-			};
-
-			hdmi: encoder@58060000 {
-				compatible = "ti,omap5-hdmi";
-				reg = <0x58040000 0x200>,
-				      <0x58040200 0x80>,
-				      <0x58040300 0x80>,
-				      <0x58060000 0x19000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
-				clock-names = "fck", "sys_clk";
-				dmas = <&sdma 76>;
-				dma-names = "audio_tx";
-			};
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
-			      <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address", "ldo-address";
-			ti,tranxdone-status-mask = <0x80>;
-			/* LDOVBBMPU_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMPU_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1060000		0	0x0	0 0x02000000 0x01F00000
-			1250000		0	0x4	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_mm: regulator-abb-mm {
-			compatible = "ti,abb-v2";
-			regulator-name = "abb_mm";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
-			      <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
-			reg-names = "base-address", "int-address",
-				    "efuse-address", "ldo-address";
-			ti,tranxdone-status-mask = <0x80000000>;
-			/* LDOVBBMM_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMM_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1025000		0	0x0	0 0x02000000 0x01F00000
-			1120000		0	0x4	0 0x02000000 0x01F00000
-			>;
-		};
-	};
-};
-
-/include/ "omap54xx-clocks.dtsi"
diff --git a/src/arm/omap54xx-clocks.dtsi b/src/arm/omap54xx-clocks.dtsi
deleted file mode 100644
index e67a23b5d788..000000000000
--- a/src/arm/omap54xx-clocks.dtsi
+++ /dev/null
@@ -1,1353 +0,0 @@
-/*
- * Device Tree Source for OMAP5 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-&cm_core_aon_clocks {
-	pad_clks_src_ck: pad_clks_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	pad_clks_ck: pad_clks_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pad_clks_src_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0108>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	slimbus_src_clk: slimbus_src_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	slimbus_clk: slimbus_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&slimbus_src_clk>;
-		ti,bit-shift = <10>;
-		reg = <0x0108>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	xclk60mhsp1_ck: xclk60mhsp1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	xclk60mhsp2_ck: xclk60mhsp2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <60000000>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_abe_ck>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-	};
-
-	abe_24m_fclk: abe_24m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	abe_clk: abe_clk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	abe_iclk: abe_iclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&aess_fclk>;
-		ti,bit-shift = <24>;
-		reg = <0x0528>;
-		ti,dividers = <2>, <1>;
-	};
-
-	abe_lp_clk_div: abe_lp_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_ck: dpll_core_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_h21x2_ck: dpll_core_h21x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	c2c_fclk: c2c_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h21x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	c2c_iclk: c2c_iclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&c2c_fclk>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_core_h11x2_ck: dpll_core_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0138>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0134>;
-		ti,index-starts-at-one;
-	};
-
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-	};
-
-	dpll_iva_x2_ck: dpll_iva_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_iva_ck>;
-	};
-
-	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x01b8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x01bc>;
-		ti,index-starts-at-one;
-	};
-
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap5-mpu-dpll-clock";
-		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-	};
-
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	l3_iclk_div: l3_iclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpu_l3_iclk: gpu_l3_iclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4_root_clk_div: l4_root_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&slimbus_clk>;
-		ti,bit-shift = <11>;
-		reg = <0x0560>;
-	};
-
-	aess_fclk: aess_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&abe_clk>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x0528>;
-	};
-
-	dmic_sync_mux_ck: dmic_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0538>;
-	};
-
-	dmic_gfclk: dmic_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0538>;
-	};
-
-	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0540>;
-	};
-
-	mcasp_gfclk: mcasp_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0540>;
-	};
-
-	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0548>;
-	};
-
-	mcbsp1_gfclk: mcbsp1_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0548>;
-	};
-
-	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0550>;
-	};
-
-	mcbsp2_gfclk: mcbsp2_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0550>;
-	};
-
-	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
-		ti,bit-shift = <26>;
-		reg = <0x0558>;
-	};
-
-	mcbsp3_gfclk: mcbsp3_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0558>;
-	};
-
-	timer5_gfclk_mux: timer5_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0568>;
-	};
-
-	timer6_gfclk_mux: timer6_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0570>;
-	};
-
-	timer7_gfclk_mux: timer7_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0578>;
-	};
-
-	timer8_gfclk_mux: timer8_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0580>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin: sys_clkin {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		reg = <0x0108>;
-	};
-
-	abe_dpll_clk_mux: abe_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dss_syc_gfclk_div: dss_syc_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	wkupaon_iclk_mux: wkupaon_iclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
-		reg = <0x0108>;
-	};
-
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&wkupaon_iclk_mux>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1938>;
-	};
-
-	timer1_gfclk_mux: timer1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1940>;
-	};
-};
-&cm_core_clocks {
-	dpll_per_ck: dpll_per_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_per_ck>;
-	};
-
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_unipro1_ck: dpll_unipro1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&sys_clkin>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
-	};
-
-	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_unipro1_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_unipro1_ck>;
-		ti,max-div = <127>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_unipro2_ck: dpll_unipro2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin>, <&sys_clkin>;
-		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
-	};
-
-	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_unipro2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_unipro2_ck>;
-		ti,max-div = <127>;
-		reg = <0x01d0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_usb_ck: dpll_usb_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-	};
-
-	func_128m_clk: func_128m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_48m_fclk: func_48m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_60m_fclk: l3init_60m_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	dss_32khz_clk: dss_32khz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x1420>;
-	};
-
-	dss_48mhz_clk: dss_48mhz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1420>;
-	};
-
-	dss_dss_clk: dss_dss_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_h12x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1420>;
-		ti,set-rate-parent;
-	};
-
-	dss_sys_clk: dss_sys_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dss_syc_gfclk_div>;
-		ti,bit-shift = <10>;
-		reg = <0x1420>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1060>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1068>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1070>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1078>;
-	};
-
-	gpio6_dbclk: gpio6_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1080>;
-	};
-
-	gpio7_dbclk: gpio7_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1110>;
-	};
-
-	gpio8_dbclk: gpio8_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1118>;
-	};
-
-	iss_ctrlclk: iss_ctrlclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_96m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1320>;
-	};
-
-	lli_txphy_clk: lli_txphy_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_unipro1_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x0f20>;
-	};
-
-	lli_txphy_ls_clk: lli_txphy_ls_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_unipro1_m2_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x0f20>;
-	};
-
-	mmc1_32khz_clk: mmc1_32khz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1628>;
-	};
-
-	sata_ref_clk: sata_ref_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin>;
-		ti,bit-shift = <8>;
-		reg = <0x1688>;
-	};
-
-	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,bit-shift = <13>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,bit-shift = <14>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <11>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <12>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <6>;
-		reg = <0x1658>;
-	};
-
-	utmi_p1_gfclk: utmi_p1_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3init_60m_fclk>, <&xclk60mhsp1_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&utmi_p1_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1658>;
-	};
-
-	utmi_p2_gfclk: utmi_p2_gfclk {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3init_60m_fclk>, <&xclk60mhsp2_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&utmi_p2_gfclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1658>;
-	};
-
-	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <10>;
-		reg = <0x1658>;
-	};
-
-	usb_otg_ss_refclk960m: usb_otg_ss_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x16f0>;
-	};
-
-	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1668>;
-	};
-
-	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1668>;
-	};
-
-	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_60m_fclk>;
-		ti,bit-shift = <10>;
-		reg = <0x1668>;
-	};
-
-	fdif_fclk: fdif_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_h11x2_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x1328>;
-	};
-
-	gpu_core_gclk_mux: gpu_core_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1520>;
-	};
-
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
-		ti,bit-shift = <25>;
-		reg = <0x1520>;
-	};
-
-	hsi_fclk: hsi_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <2>;
-		reg = <0x1638>;
-	};
-
-	mmc1_fclk_mux: mmc1_fclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1628>;
-	};
-
-	mmc1_fclk: mmc1_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc1_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <2>;
-		reg = <0x1628>;
-	};
-
-	mmc2_fclk_mux: mmc2_fclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1630>;
-	};
-
-	mmc2_fclk: mmc2_fclk {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc2_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <2>;
-		reg = <0x1630>;
-	};
-
-	timer10_gfclk_mux: timer10_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1028>;
-	};
-
-	timer11_gfclk_mux: timer11_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1030>;
-	};
-
-	timer2_gfclk_mux: timer2_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1038>;
-	};
-
-	timer3_gfclk_mux: timer3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1040>;
-	};
-
-	timer4_gfclk_mux: timer4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1048>;
-	};
-
-	timer9_gfclk_mux: timer9_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin>, <&sys_32k_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1050>;
-	};
-};
-
-&cm_core_clockdomains {
-	l3init_clkdm: l3init_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_usb_ck>;
-	};
-};
-
-&scrm_clocks {
-	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0310>;
-	};
-
-	auxclk0_src_ck: auxclk0_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
-	};
-
-	auxclk0_ck: auxclk0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk0_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0310>;
-	};
-
-	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0314>;
-	};
-
-	auxclk1_src_ck: auxclk1_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
-	};
-
-	auxclk1_ck: auxclk1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk1_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0314>;
-	};
-
-	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0318>;
-	};
-
-	auxclk2_src_ck: auxclk2_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
-	};
-
-	auxclk2_ck: auxclk2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk2_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0318>;
-	};
-
-	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x031c>;
-	};
-
-	auxclk3_src_ck: auxclk3_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
-	};
-
-	auxclk3_ck: auxclk3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk3_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x031c>;
-	};
-
-	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&dpll_core_m3x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0320>;
-	};
-
-	auxclk4_src_ck: auxclk4_src_ck {
-		#clock-cells = <0>;
-		compatible = "ti,composite-clock";
-		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
-	};
-
-	auxclk4_ck: auxclk4_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&auxclk4_src_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <16>;
-		reg = <0x0320>;
-	};
-
-	auxclkreq0_ck: auxclkreq0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0210>;
-	};
-
-	auxclkreq1_ck: auxclkreq1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0214>;
-	};
-
-	auxclkreq2_ck: auxclkreq2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x0218>;
-	};
-
-	auxclkreq3_ck: auxclkreq3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x021c>;
-	};
-};
diff --git a/src/arm/orion5x-lacie-d2-network.dts b/src/arm/orion5x-lacie-d2-network.dts
deleted file mode 100644
index c701e8d16bbb..000000000000
--- a/src/arm/orion5x-lacie-d2-network.dts
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "LaCie d2 Network";
-	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		front_button {
-			label = "Front Push Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_rocker_sw_on {
-			label = "Power rocker switch (on|auto)";
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
-			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		power_rocker_sw_off {
-			label = "Power rocker switch (auto|off)";
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
-		pinctrl-names = "default";
-
-		sata0_power: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "SATA0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-		};
-
-		sata1_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "SATA1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	devbus,keep-config;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-                #address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "Full512Kb";
-			reg = <0 0x80000>;
-			read-only;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@32 {
-		compatible = "ricoh,rs5c372b";
-		reg = <0x32>;
-	};
-
-	fan@3e {
-		compatible = "gmt,g762";
-		reg = <0x3e>;
-
-		/* Not enough HW info */
-		status = "disabled";
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
-	pinctrl-names = "default";
-
-	pmx_board_id: pmx-board-id {
-		marvell,pins = "mpp0", "mpp1", "mpp2";
-		marvell,function = "gpio";
-	};
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp8", "mpp9", "mpp18";
-		marvell,function = "gpio";
-	};
-
-	pmx_fan_fail: pmx-fan-fail {
-		marvell,pins = "mpp5";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * MPP6: Red front LED
-	 * MPP16: Blue front LED blink control
-	 */
-	pmx_leds: pmx-leds {
-		marvell,pins = "mpp6", "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata0_led_active: pmx-sata0-led-active {
-		marvell,pins = "mpp14";
-		marvell,function = "sata0";
-	};
-
-	pmx_sata0_power: pmx-sata0-power {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata1_led_active: pmx-sata1-led-active {
-		marvell,pins = "mpp15";
-		marvell,function = "sata1";
-	};
-
-	pmx_sata1_power: pmx-sata1-power {
-		marvell,pins = "mpp12";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * Non MPP GPIOs:
-	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
-	 *  GPIO 23: Blue front LED off
-	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
-	 */
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0_led_active
-		     &pmx_sata1_led_active>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts b/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts
deleted file mode 100644
index 89ff404a528c..000000000000
--- a/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/*
- * TODO: add Orion USB device port init when kernel.org support is added.
- * TODO: add flash write support: see below.
- * TODO: add power-off support.
- * TODO: add I2C EEPROM support.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "LaCie Ethernet Disk mini V2";
-	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_power_button>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@1 {
-			label = "Power-on Switch";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_power_led>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "power:blue";
-			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Read parameters */
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <90000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <186000>;
-	devbus,acc-next-ps  = <186000>;
-
-	/* Write parameters */
-	devbus,wr-high-ps  = <90000>;
-	devbus,wr-low-ps   = <90000>;
-	devbus,ale-wr-ps   = <90000>;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "Full512Kb";
-			reg = <0 0x80000>;
-			read-only;
-		};
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@32 {
-		compatible = "ricoh,rs5c372a";
-		reg = <0x32>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
-	pinctrl-names = "default";
-
-	pmx_power_button: pmx-power-button {
-		marvell,pins = "mpp18";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_led: pmx-power-led {
-		marvell,pins = "mpp16";
-		marvell,function = "gpio";
-	};
-
-	pmx_power_led_ctrl: pmx-power-led-ctrl {
-		marvell,pins = "mpp17";
-		marvell,function = "gpio";
-	};
-
-	pmx_rtc: pmx-rtc {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/orion5x-maxtor-shared-storage-2.dts b/src/arm/orion5x-maxtor-shared-storage-2.dts
deleted file mode 100644
index ff3484904294..000000000000
--- a/src/arm/orion5x-maxtor-shared-storage-2.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "Maxtor Shared Storage II";
-	compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pmx_buttons>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		power {
-			label = "Power";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	devbus,keep-config;
-
-	/*
-	 * Currently the MTD code does not recognize the MX29LV400CBCT
-	 * as a bottom-type device. This could cause risks of
-	 * accidentally erasing critical flash sectors. We thus define
-	 * a single, write-protected partition covering the whole
-	 * flash.  TODO: once the flash part TOP/BOTTOM detection
-	 * issue is sorted out in the MTD code, break this into at
-	 * least three partitions: 'u-boot code', 'u-boot environment'
-	 * and 'whatever is left'.
-	 */
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x40000>;
-		bank-width = <1>;
-                #address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@68 {
-		compatible = "st,m41t81";
-		reg = <0x68>;
-		pinctrl-0 = <&pmx_rtc>;
-		pinctrl-names = "default";
-		interrupt-parent = <&gpio0>;
-		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_leds &pmx_misc>;
-	pinctrl-names = "default";
-
-	pmx_buttons: pmx-buttons {
-		marvell,pins = "mpp11", "mpp12";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * MPP0: Power LED
-	 * MPP1: Error LED
-	 */
-	pmx_leds: pmx-leds {
-		marvell,pins = "mpp0", "mpp1";
-		marvell,function = "gpio";
-	};
-
-	/*
-	 * MPP4: HDD ind. (Single/Dual)
-	 * MPP5: HD0 5V control
-	 * MPP6: HD0 12V control
-	 * MPP7: HD1 5V control
-	 * MPP8: HD1 12V control
-	 */
-	pmx_misc: pmx-misc {
-		marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
-		marvell,function = "gpio";
-	};
-
-	pmx_rtc: pmx-rtc {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_sata0_led_active: pmx-sata0-led-active {
-		marvell,pins = "mpp14";
-		marvell,function = "sata0";
-	};
-
-	pmx_sata1_led_active: pmx-sata1-led-active {
-		marvell,pins = "mpp15";
-		marvell,function = "sata1";
-	};
-
-	/*
-	 * Non MPP GPIOs:
-	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
-	 *  GPIO 23: Blue front LED off
-	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
-	 */
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0_led_active
-		     &pmx_sata1_led_active>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/orion5x-mv88f5182.dtsi b/src/arm/orion5x-mv88f5182.dtsi
deleted file mode 100644
index d1ed71c60209..000000000000
--- a/src/arm/orion5x-mv88f5182.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "orion5x.dtsi"
-
-/ {
-	compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	soc {
-		compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
-
-		internal-regs {
-			pinctrl: pinctrl@10000 {
-				compatible = "marvell,88f5182-pinctrl";
-				reg = <0x10000 0x8>, <0x10050 0x4>;
-
-				pmx_sata0: pmx-sata0 {
-					marvell,pins = "mpp12", "mpp14";
-					marvell,function = "sata0";
-				};
-
-				pmx_sata1: pmx-sata1 {
-					marvell,pins = "mpp13", "mpp15";
-					marvell,function = "sata1";
-				};
-			};
-
-			core_clk: core-clocks@10030 {
-				compatible = "marvell,mv88f5182-core-clock";
-				reg = <0x10010 0x4>;
-				#clock-cells = <1>;
-			};
-
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x1500 0x20>;
-			};
-		};
-	};
-};
diff --git a/src/arm/orion5x-rd88f5182-nas.dts b/src/arm/orion5x-rd88f5182-nas.dts
deleted file mode 100644
index 6fb052507b36..000000000000
--- a/src/arm/orion5x-rd88f5182-nas.dts
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "orion5x-mv88f5182.dtsi"
-
-/ {
-	model = "Marvell Reference Design 88F5182 NAS";
-	compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
-
-	memory {
-		reg = <0x00000000 0x4000000>; /* 64 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
-			 <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_debug_led>;
-		pinctrl-names = "default";
-
-		led@0 {
-			label = "rd88f5182:cpu";
-			linux,default-trigger = "heartbeat";
-			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&devbus_bootcs {
-	status = "okay";
-
-	/* Read parameters */
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <90000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <186000>;
-	devbus,acc-next-ps  = <186000>;
-
-	/* Write parameters */
-	devbus,wr-high-ps  = <90000>;
-	devbus,wr-low-ps   = <90000>;
-	devbus,ale-wr-ps   = <90000>;
-
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x80000>;
-		bank-width = <1>;
-	};
-};
-
-&devbus_cs1 {
-	status = "okay";
-
-	/* Read parameters */
-	devbus,bus-width    = <8>;
-	devbus,turn-off-ps  = <90000>;
-	devbus,badr-skew-ps = <0>;
-	devbus,acc-first-ps = <186000>;
-	devbus,acc-next-ps  = <186000>;
-
-	/* Write parameters */
-	devbus,wr-high-ps  = <90000>;
-	devbus,wr-low-ps   = <90000>;
-	devbus,ale-wr-ps   = <90000>;
-
-	flash@0 {
-		compatible = "cfi-flash";
-		reg = <0 0x1000000>;
-		bank-width = <1>;
-	};
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
-	};
-};
-
-&i2c {
-	status = "okay";
-	clock-frequency = <100000>;
-	#address-cells = <1>;
-
-	rtc@68 {
-		pinctrl-0 = <&pmx_rtc>;
-		pinctrl-names = "default";
-		compatible = "dallas,ds1338";
-		reg = <0x68>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy: ethernet-phy {
-		reg = <8>;
-	};
-};
-
-&pinctrl {
-	pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
-		&pmx_pci_gpios>;
-	pinctrl-names = "default";
-
-	/*
-	 * MPP[20] PCI Clock to MV88F5182
-	 * MPP[21] PCI Clock to mini PCI CON11
-	 * MPP[22] USB 0 over current indication
-	 * MPP[23] USB 1 over current indication
-	 * MPP[24] USB 1 over current enable
-	 * MPP[25] USB 0 over current enable
-	 */
-
-	pmx_debug_led: pmx-debug_led {
-		marvell,pins = "mpp0";
-		marvell,function = "gpio";
-	};
-
-	pmx_reset_switch: pmx-reset-switch {
-		marvell,pins = "mpp1";
-		marvell,function = "gpio";
-	};
-
-	pmx_rtc: pmx-rtc {
-		marvell,pins = "mpp3";
-		marvell,function = "gpio";
-	};
-
-	pmx_misc_gpios: pmx-misc-gpios {
-		marvell,pins = "mpp4", "mpp5";
-		marvell,function = "gpio";
-	};
-
-	pmx_pci_gpios: pmx-pci-gpios {
-		marvell,pins = "mpp6", "mpp7";
-		marvell,function = "gpio";
-	};
-};
-
-&sata {
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	status = "okay";
-	nr-ports = <2>;
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/orion5x.dtsi b/src/arm/orion5x.dtsi
deleted file mode 100644
index 75cd01bd6024..000000000000
--- a/src/arm/orion5x.dtsi
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "skeleton.dtsi"
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	model = "Marvell Orion5x SoC";
-	compatible = "marvell,orion5x";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		gpio0 = &gpio0;
-	};
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-
-		devbus_bootcs: devbus-bootcs {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs0: devbus-cs0 {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs1: devbus-cs1 {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		devbus_cs2: devbus-cs2 {
-			compatible = "marvell,orion-devbus";
-			reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
-			ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clocks = <&core_clk 0>;
-			status = "disabled";
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
-
-			gpio0: gpio@10100 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0x10100 0x40>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <6>, <7>, <8>, <9>;
-			};
-
-			spi: spi@10600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				reg = <0x10600 0x28>;
-				status = "disabled";
-			};
-
-			i2c: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <5>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart0: serial@12000 {
-				compatible = "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <3>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <4>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			bridge_intc: bridge-interrupt-ctrl@20110 {
-				compatible = "marvell,orion-bridge-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20110 0x8>;
-				interrupts = <0>;
-				marvell,#interrupts = <4>;
-			};
-
-			intc: interrupt-controller@20200 {
-				compatible = "marvell,orion-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20200 0x08>;
-			};
-
-			timer: timer@20300 {
-				compatible = "marvell,orion-timer";
-				reg = <0x20300 0x20>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <1>, <2>;
-				clocks = <&core_clk 0>;
-			};
-
-			wdt: wdt@20300 {
-				compatible = "marvell,orion-wdt";
-				reg = <0x20300 0x28>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <3>;
-				status = "okay";
-			};
-
-			ehci0: ehci@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x1000>;
-				interrupts = <17>;
-				status = "disabled";
-			};
-
-			xor: dma-controller@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				status = "okay";
-
-				xor00 {
-				      interrupts = <30>;
-				      dmacap,memcpy;
-				      dmacap,xor;
-				};
-				xor01 {
-				      interrupts = <31>;
-				      dmacap,memcpy;
-				      dmacap,xor;
-				      dmacap,memset;
-				};
-			};
-
-			eth: ethernet-controller@72000 {
-				compatible = "marvell,orion-eth";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72000 0x4000>;
-				marvell,tx-checksum-limit = <1600>;
-				status = "disabled";
-
-				ethport: ethernet-port@0 {
-					compatible = "marvell,orion-eth-port";
-					reg = <0>;
-					interrupts = <21>;
-					/* overwrite MAC address in bootloader */
-					local-mac-address = [00 00 00 00 00 00];
-					/* set phy-handle property in board file */
-				};
-			};
-
-			mdio: mdio-bus@72004 {
-				compatible = "marvell,orion-mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72004 0x84>;
-				interrupts = <22>;
-				status = "disabled";
-
-				/* add phy nodes in board file */
-			};
-
-			sata: sata@80000 {
-				compatible = "marvell,orion-sata";
-				reg = <0x80000 0x5000>;
-				interrupts = <29>;
-				status = "disabled";
-			};
-
-			ehci1: ehci@a0000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0xa0000 0x1000>;
-				interrupts = <12>;
-				status = "disabled";
-			};
-		};
-
-		cesa: crypto@90000 {
-			compatible = "marvell,orion-crypto";
-			reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
-			      <MBUS_ID(0x09, 0x00) 0x0 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <28>;
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/phy3250.dts b/src/arm/phy3250.dts
deleted file mode 100644
index 90fdbd77f274..000000000000
--- a/src/arm/phy3250.dts
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * PHYTEC phyCORE-LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "lpc32xx.dtsi"
-
-/ {
-	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
-	compatible = "phytec,phy3250", "nxp,lpc3250";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x4000000>;
-	};
-
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
-		};
-
-		/* Here, choose exactly one from: ohci, usbd */
-		ohci@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-
-/*
-		usbd@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-*/
-
-		clcd@31040000 {
-			status = "okay";
-		};
-
-		/* 64MB Flash via SLC NAND controller */
-		slc: flash@20020000 {
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nxp,wdr-clks = <14>;
-			nxp,wwidth = <40000000>;
-			nxp,whold = <100000000>;
-			nxp,wsetup = <100000000>;
-			nxp,rdr-clks = <14>;
-			nxp,rwidth = <40000000>;
-			nxp,rhold = <66666666>;
-			nxp,rsetup = <100000000>;
-			nand-on-flash-bbt;
-			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-			mtd0@00000000 {
-				label = "phy3250-boot";
-				reg = <0x00000000 0x00064000>;
-				read-only;
-			};
-
-			mtd1@00064000 {
-				label = "phy3250-uboot";
-				reg = <0x00064000 0x00190000>;
-				read-only;
-			};
-
-			mtd2@001f4000 {
-				label = "phy3250-ubt-prms";
-				reg = <0x001f4000 0x00010000>;
-			};
-
-			mtd3@00204000 {
-				label = "phy3250-kernel";
-				reg = <0x00204000 0x00400000>;
-			};
-
-			mtd4@00604000 {
-				label = "phy3250-rootfs";
-				reg = <0x00604000 0x039fc000>;
-			};
-		};
-
-		apb {
-			uart5: serial@40090000 {
-				status = "okay";
-			};
-
-			uart3: serial@40080000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@400A0000 {
-				clock-frequency = <100000>;
-
-				pcf8563: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				uda1380: uda1380@18 {
-					compatible = "nxp,uda1380";
-					reg = <0x18>;
-					power-gpio = <&gpio 0x59 0>;
-					reset-gpio = <&gpio 0x51 0>;
-					dac-clk = "wspll";
-				};
-			};
-
-			i2c2: i2c@400A8000 {
-				clock-frequency = <100000>;
-			};
-
-			i2cusb: i2c@31020300 {
-				clock-frequency = <100000>;
-
-				isp1301: usb-transceiver@2c {
-					compatible = "nxp,isp1301";
-					reg = <0x2c>;
-				};
-			};
-
-			ssp0: ssp@20084000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				num-cs = <1>;
-				cs-gpios = <&gpio 3 5 0>;
-
-				eeprom: at25@0 {
-					pl022,interface = <0>;
-					pl022,com-mode = <0>;
-					pl022,rx-level-trig = <1>;
-					pl022,tx-level-trig = <1>;
-					pl022,ctrl-len = <11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-
-					at25,byte-len = <0x8000>;
-					at25,addr-mode = <2>;
-					at25,page-size = <64>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <5000000>;
-				};
-			};
-
-			sd@20098000 {
-				wp-gpios = <&gpio 3 0 0>;
-				cd-gpios = <&gpio 3 1 0>;
-				cd-inverted;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		fab {
-			uart2: serial@40018000 {
-				status = "okay";
-			};
-
-			tsc@40048000 {
-				status = "okay";
-			};
-
-			key@40050000 {
-				status = "okay";
-				keypad,num-rows = <1>;
-				keypad,num-columns = <1>;
-				nxp,debounce-delay-ms = <3>;
-				nxp,scan-delay-ms = <34>;
-				linux,keymap = <0x00000002>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 { /* red */
-			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
-			default-state = "off";
-		};
-
-		led1 { /* green */
-			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/src/arm/picoxcell-pc3x2.dtsi b/src/arm/picoxcell-pc3x2.dtsi
deleted file mode 100644
index 533919e96eae..000000000000
--- a/src/arm/picoxcell-pc3x2.dtsi
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/include/ "skeleton.dtsi"
-/ {
-	model = "Picochip picoXcell PC3X2";
-	compatible = "picochip,pc3x2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1176jz-s";
-			device_type = "cpu";
-			clock-frequency = <400000000>;
-			d-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-line-size = <32>;
-			i-cache-size = <32768>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		pclk: clock@0 {
-			compatible = "fixed-clock";
-			clock-outputs = "bus", "pclk";
-			clock-frequency = <200000000>;
-			ref-clock = <&ref_clk>, "ref";
-		};
-	};
-
-	paxi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x80000000 0x400000>;
-
-		emac: gem@30000 {
-			compatible = "cadence,gem";
-			reg = <0x30000 0x10000>;
-			interrupts = <31>;
-		};
-
-		dmac1: dmac@40000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x40000 0x10000>;
-			interrupts = <25>;
-		};
-
-		dmac2: dmac@50000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x50000 0x10000>;
-			interrupts = <26>;
-		};
-
-		vic0: interrupt-controller@60000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x60000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@64000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x64000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		fuse: picoxcell-fuse@80000 {
-			compatible = "picoxcell,fuse-pc3x2";
-			reg = <0x80000 0x10000>;
-		};
-
-		ssi: picoxcell-spi@90000 {
-			compatible = "picoxcell,spi";
-			reg = <0x90000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <10>;
-		};
-
-		ipsec: spacc@100000 {
-			compatible = "picochip,spacc-ipsec";
-			reg = <0x100000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <24>;
-			ref-clock = <&pclk>, "ref";
-		};
-
-		srtp: spacc@140000 {
-			compatible = "picochip,spacc-srtp";
-			reg = <0x140000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <23>;
-		};
-
-		l2_engine: spacc@180000 {
-			compatible = "picochip,spacc-l2";
-			reg = <0x180000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <22>;
-			ref-clock = <&pclk>, "ref";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x200000 0x80000>;
-
-			rtc0: rtc@00000 {
-				compatible = "picochip,pc3x2-rtc";
-				clock-freq = <200000000>;
-				reg = <0x00000 0xf>;
-				interrupt-parent = <&vic1>;
-				interrupts = <8>;
-			};
-
-			timer0: timer@10000 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <4>;
-				clock-freq = <200000000>;
-				reg = <0x10000 0x14>;
-			};
-
-			timer1: timer@10014 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <5>;
-				clock-freq = <200000000>;
-				reg = <0x10014 0x14>;
-			};
-
-			timer2: timer@10028 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <6>;
-				clock-freq = <200000000>;
-				reg = <0x10028 0x14>;
-			};
-
-			timer3: timer@1003c {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <7>;
-				clock-freq = <200000000>;
-				reg = <0x1003c 0x14>;
-			};
-
-			gpio: gpio@20000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x20000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg-io-width = <4>;
-
-				banka: gpio-controller@0 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <8>;
-
-					regoffset-dat = <0x50>;
-					regoffset-set = <0x00>;
-					regoffset-dirout = <0x04>;
-				};
-
-				bankb: gpio-controller@1 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <8>;
-
-					regoffset-dat = <0x54>;
-					regoffset-set = <0x0c>;
-					regoffset-dirout = <0x10>;
-				};
-			};
-
-			uart0: uart@30000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x30000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <10>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			uart1: uart@40000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x40000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <9>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			wdog: watchdog@50000 {
-				compatible = "snps,dw-apb-wdg";
-				reg = <0x50000 0x10000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <11>;
-				bus-clock = <&pclk>, "bus";
-			};
-		};
-	};
-
-	rwid-axi {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		ebi@50000000 {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x40000000 0x08000000
-				  1 0 0x48000000 0x08000000
-				  2 0 0x50000000 0x08000000
-				  3 0 0x58000000 0x08000000>;
-		};
-
-		axi2pico@c0000000 {
-			compatible = "picochip,axi2pico-pc3x2";
-			reg = <0xc0000000 0x10000>;
-			interrupts = <13 14 15 16 17 18 19 20 21>;
-		};
-	};
-};
diff --git a/src/arm/picoxcell-pc3x3.dtsi b/src/arm/picoxcell-pc3x3.dtsi
deleted file mode 100644
index ab3e80085511..000000000000
--- a/src/arm/picoxcell-pc3x3.dtsi
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/include/ "skeleton.dtsi"
-/ {
-	model = "Picochip picoXcell PC3X3";
-	compatible = "picochip,pc3x3";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm1176jz-s";
-			device_type = "cpu";
-			cpu-clock = <&arm_clk>, "cpu";
-			d-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-line-size = <32>;
-			i-cache-size = <32768>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clkgate: clkgate@800a0048 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x800a0048 4>;
-			compatible = "picochip,pc3x3-clk-gate";
-
-			tzprot_clk: clock@0 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <0>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			spi_clk: clock@1 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <1>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			dmac0_clk: clock@2 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <2>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			dmac1_clk: clock@3 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <3>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			ebi_clk: clock@4 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <4>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			ipsec_clk: clock@5 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <5>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			l2_clk: clock@6 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <6>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			trng_clk: clock@7 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <7>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			fuse_clk: clock@8 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <8>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-
-			otp_clk: clock@9 {
-				compatible = "picochip,pc3x3-gated-clk";
-				clock-outputs = "bus";
-				picochip,clk-disable-bit = <9>;
-				clock-frequency = <200000000>;
-				ref-clock = <&ref_clk>, "ref";
-			};
-		};
-
-		arm_clk: clock@11 {
-			compatible = "picochip,pc3x3-pll";
-			reg = <0x800a0050 0x8>;
-			picochip,min-freq = <140000000>;
-			picochip,max-freq = <700000000>;
-			ref-clock = <&ref_clk>, "ref";
-			clock-outputs = "cpu";
-		};
-
-		pclk: clock@12 {
-			compatible = "fixed-clock";
-			clock-outputs = "bus", "pclk";
-			clock-frequency = <200000000>;
-			ref-clock = <&ref_clk>, "ref";
-		};
-	};
-
-	paxi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x80000000 0x400000>;
-
-		emac: gem@30000 {
-			compatible = "cadence,gem";
-			reg = <0x30000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <31>;
-		};
-
-		dmac1: dmac@40000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x40000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <25>;
-		};
-
-		dmac2: dmac@50000 {
-			compatible = "snps,dw-dmac";
-			reg = <0x50000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <26>;
-		};
-
-		vic0: interrupt-controller@60000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x60000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@64000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x64000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		fuse: picoxcell-fuse@80000 {
-			compatible = "picoxcell,fuse-pc3x3";
-			reg = <0x80000 0x10000>;
-		};
-
-		ssi: picoxcell-spi@90000 {
-			compatible = "picoxcell,spi";
-			reg = <0x90000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <10>;
-		};
-
-		ipsec: spacc@100000 {
-			compatible = "picochip,spacc-ipsec";
-			reg = <0x100000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <24>;
-			ref-clock = <&ipsec_clk>, "ref";
-		};
-
-		srtp: spacc@140000 {
-			compatible = "picochip,spacc-srtp";
-			reg = <0x140000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <23>;
-		};
-
-		l2_engine: spacc@180000 {
-			compatible = "picochip,spacc-l2";
-			reg = <0x180000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <22>;
-			ref-clock = <&l2_clk>, "ref";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x200000 0x80000>;
-
-			rtc0: rtc@00000 {
-				compatible = "picochip,pc3x2-rtc";
-				clock-freq = <200000000>;
-				reg = <0x00000 0xf>;
-				interrupt-parent = <&vic0>;
-				interrupts = <8>;
-			};
-
-			timer0: timer@10000 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <4>;
-				clock-freq = <200000000>;
-				reg = <0x10000 0x14>;
-			};
-
-			timer1: timer@10014 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <5>;
-				clock-freq = <200000000>;
-				reg = <0x10014 0x14>;
-			};
-
-			gpio: gpio@20000 {
-				compatible = "snps,dw-apb-gpio";
-				reg = <0x20000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg-io-width = <4>;
-
-				banka: gpio-controller@0 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <8>;
-
-					regoffset-dat = <0x50>;
-					regoffset-set = <0x00>;
-					regoffset-dirout = <0x04>;
-				};
-
-				bankb: gpio-controller@1 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <16>;
-
-					regoffset-dat = <0x54>;
-					regoffset-set = <0x0c>;
-					regoffset-dirout = <0x10>;
-				};
-
-				bankd: gpio-controller@2 {
-					compatible = "snps,dw-apb-gpio-bank";
-					gpio-controller;
-					#gpio-cells = <2>;
-					gpio-generic,nr-gpio = <30>;
-
-					regoffset-dat = <0x5c>;
-					regoffset-set = <0x24>;
-					regoffset-dirout = <0x28>;
-				};
-			};
-
-			uart0: uart@30000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x30000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <10>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			uart1: uart@40000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x40000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <9>;
-				clock-frequency = <3686400>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-			};
-
-			wdog: watchdog@50000 {
-				compatible = "snps,dw-apb-wdg";
-				reg = <0x50000 0x10000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <11>;
-				bus-clock = <&pclk>, "bus";
-			};
-
-			timer2: timer@60000 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <6>;
-				clock-freq = <200000000>;
-				reg = <0x60000 0x14>;
-			};
-
-			timer3: timer@60014 {
-				compatible = "picochip,pc3x2-timer";
-				interrupt-parent = <&vic0>;
-				interrupts = <7>;
-				clock-freq = <200000000>;
-				reg = <0x60014 0x14>;
-			};
-		};
-	};
-
-	rwid-axi {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-
-		ebi@50000000 {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x40000000 0x08000000
-				  1 0 0x48000000 0x08000000
-				  2 0 0x50000000 0x08000000
-				  3 0 0x58000000 0x08000000>;
-		};
-
-		axi2pico@c0000000 {
-			compatible = "picochip,axi2pico-pc3x3";
-			reg = <0xc0000000 0x10000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <13 14 15 16 17 18 19 20 21>;
-		};
-
-		otp@ffff8000 {
-			compatible = "picochip,otp-pc3x3";
-			reg = <0xffff8000 0x8000>;
-		};
-	};
-};
diff --git a/src/arm/picoxcell-pc7302-pc3x2.dts b/src/arm/picoxcell-pc7302-pc3x2.dts
deleted file mode 100644
index 1297414dd649..000000000000
--- a/src/arm/picoxcell-pc7302-pc3x2.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-/include/ "picoxcell-pc3x2.dtsi"
-/ {
-	model = "Picochip PC7302 (PC3X2)";
-	compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-
-	chosen {
-		linux,stdout-path = &uart0;
-	};
-
-	clocks {
-		ref_clk: clock@1 {
-			compatible = "fixed-clock";
-			clock-outputs = "ref";
-			clock-frequency = <20000000>;
-		};
-	};
-
-	rwid-axi {
-		ebi@50000000 {
-			nand: gpio-nand@2,0 {
-				compatible = "gpio-control-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <2 0x0000 0x1000>;
-				bus-clock = <&pclk>, "bus";
-				gpio-control-nand,io-sync-reg =
-					<0x00000000 0x80220000>;
-
-				gpios = <&banka 1 0	/* rdy */
-					 &banka 2 0 	/* nce */
-					 &banka 3 0 	/* ale */
-					 &banka 4 0 	/* cle */
-					 0		/* nwp */>;
-
-				boot@100000 {
-					label = "Boot";
-					reg = <0x100000 0x80000>;
-				};
-
-				redundant-boot@200000 {
-					label = "Redundant Boot";
-					reg = <0x200000 0x80000>;
-				};
-
-				boot-env@300000 {
-					label = "Boot Evironment";
-					reg = <0x300000 0x20000>;
-				};
-
-				redundant-boot-env@320000 {
-					label = "Redundant Boot Environment";
-					reg = <0x300000 0x20000>;
-				};
-
-				kernel@380000 {
-					label = "Kernel";
-					reg = <0x380000 0x800000>;
-				};
-
-				fs@b80000 {
-					label = "File System";
-					reg = <0xb80000 0xf480000>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/picoxcell-pc7302-pc3x3.dts b/src/arm/picoxcell-pc7302-pc3x3.dts
deleted file mode 100644
index 9e317a4f431c..000000000000
--- a/src/arm/picoxcell-pc7302-pc3x3.dts
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- *  Copyright (C) 2011 Picochip, Jamie Iles
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-/include/ "picoxcell-pc3x3.dtsi"
-/ {
-	model = "Picochip PC7302 (PC3X3)";
-	compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-
-	chosen {
-		linux,stdout-path = &uart0;
-	};
-
-	clocks {
-		ref_clk: clock@10 {
-			compatible = "fixed-clock";
-			clock-outputs = "ref";
-			clock-frequency = <20000000>;
-		};
-
-		clkgate: clkgate@800a0048 {
-			clock@4 {
-				picochip,clk-no-disable;
-			};
-		};
-	};
-
-	rwid-axi {
-		ebi@50000000 {
-			nand: gpio-nand@2,0 {
-				compatible = "gpio-control-nand";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <2 0x0000 0x1000>;
-				bus-clock = <&ebi_clk>, "bus";
-				gpio-control-nand,io-sync-reg =
-					<0x00000000 0x80220000>;
-
-				gpios = <&banka 1 0	/* rdy */
-					 &banka 2 0 	/* nce */
-					 &banka 3 0 	/* ale */
-					 &banka 4 0 	/* cle */
-					 0		/* nwp */>;
-
-				boot@100000 {
-					label = "Boot";
-					reg = <0x100000 0x80000>;
-				};
-
-				redundant-boot@200000 {
-					label = "Redundant Boot";
-					reg = <0x200000 0x80000>;
-				};
-
-				boot-env@300000 {
-					label = "Boot Evironment";
-					reg = <0x300000 0x20000>;
-				};
-
-				redundant-boot-env@320000 {
-					label = "Redundant Boot Environment";
-					reg = <0x300000 0x20000>;
-				};
-
-				kernel@380000 {
-					label = "Kernel";
-					reg = <0x380000 0x800000>;
-				};
-
-				fs@b80000 {
-					label = "File System";
-					reg = <0xb80000 0xf480000>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/prima2-evb.dts b/src/arm/prima2-evb.dts
deleted file mode 100644
index 57286b4e7b87..000000000000
--- a/src/arm/prima2-evb.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * DTS file for CSR SiRFprimaII Evaluation Board
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "prima2.dtsi"
-
-/ {
-	model = "CSR SiRFprimaII Evaluation Board";
-	compatible = "sirf,prima2", "sirf,prima2-cb";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	axi {
-		peri-iobg {
-			uart@b0060000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart1_pins_a>;
-			};
-			spi@b00d0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins_a>;
-			};
-			spi@b0170000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins_a>;
-			};
-		};
-	};
-};
diff --git a/src/arm/prima2.dtsi b/src/arm/prima2.dtsi
deleted file mode 100644
index 963b7e54ab15..000000000000
--- a/src/arm/prima2.dtsi
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * DTS file for CSR SiRFprimaII SoC
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
-	compatible = "sirf,prima2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			clocks = <&clks 12>;
-			operating-points = <
-				/* kHz    uV */
-				200000  1025000
-				400000  1025000
-				664000  1050000
-				800000  1100000
-			>;
-			clock-latency = <150000>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		l2-cache-controller@80040000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x80040000 0x1000>;
-			interrupts = <59>;
-			arm,tag-latency = <1 1 1>;
-			arm,data-latency = <1 1 1>;
-			arm,filter-ranges = <0 0x40000000>;
-		};
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clks: clock-controller@88000000 {
-				compatible = "sirf,prima2-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-				#clock-cells = <1>;
-			};
-
-			rstc: reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-				#reset-cells = <1>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-
-			cphifbg@88030000 {
-				compatible = "sirf,prima2-cphifbg";
-				reg = <0x88030000 0x1000>;
-				clocks = <&clks 42>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x2000>;
-				interrupts = <27>;
-				clocks = <&clks 5>;
-			};
-
-			memc-monitor {
-				compatible = "sirf,prima2-memcmon";
-				reg = <0x90002000 0x200>;
-				interrupts = <4>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			display@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-				clocks = <&clks 35>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx531";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		multimedia-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			multimedia@a0000000 {
-				compatible = "sirf,prima2-video-codec";
-				reg = <0xa0000000 0x8000000>;
-				interrupts = <5>;
-				clocks = <&clks 33>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-				clocks = <&clks 9>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-				clocks = <&clks 8>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>,
-			       <0x56000000 0x56000000 0x1b00000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-				clocks = <&clks 11>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-				clocks = <&clks 26>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-				clocks = <&clks 27>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x1000>;
-				interrupts = <17>;
-				fifosize = <128>;
-				clocks = <&clks 13>;
-				dmas = <&dmac1 5>, <&dmac0 2>;
-				dma-names = "rx", "tx";
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x1000>;
-				interrupts = <18>;
-				fifosize = <32>;
-				clocks = <&clks 14>;
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x1000>;
-				interrupts = <19>;
-				fifosize = <128>;
-				clocks = <&clks 15>;
-				dmas = <&dmac0 6>, <&dmac0 7>;
-				dma-names = "rx", "tx";
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-				fifosize = <128>;
-				clocks = <&clks 28>;
-				dmas = <&dmac1 1>, <&dmac1 2>;
-				dma-names = "rx", "tx";
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-				fifosize = <128>;
-				clocks = <&clks 29>;
-				dmas = <&dmac0 14>, <&dmac0 15>;
-				dma-names = "rx", "tx";
-			};
-
-			usp2: usp@b00a0000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb00a0000 0x10000>;
-				interrupts = <22>;
-				fifosize = <128>;
-				clocks = <&clks 30>;
-				dmas = <&dmac0 10>, <&dmac0 11>;
-				dma-names = "rx", "tx";
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-				clocks = <&clks 24>;
-				#dma-cells = <1>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-				clocks = <&clks 25>;
-				#dma-cells = <1>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-				clocks = <&clks 31>;
-				interrupts = <14>;
-				sirf,vip-dma-rx-channel = <16>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac1 9>,
-				     <&dmac1 4>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 19>;
-				status = "disabled";
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac0 12>,
-				     <&dmac0 13>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 20>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-				clocks = <&clks 17>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-				clocks = <&clks 18>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-				clocks = <&clks 16>;
-			};
-
-			gpio: pinctrl@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,prima2-pinctrl";
-				reg = <0xb0120000 0x10000>;
-				interrupts = <43 44 45 46 47>;
-				gpio-controller;
-				interrupt-controller;
-
-				lcd_16pins_a: lcd0@0 {
-					lcd {
-						sirf,pins = "lcd_16bitsgrp";
-						sirf,function = "lcd_16bits";
-					};
-				};
-				lcd_18pins_a: lcd0@1 {
-					lcd {
-						sirf,pins = "lcd_18bitsgrp";
-						sirf,function = "lcd_18bits";
-					};
-				};
-				lcd_24pins_a: lcd0@2 {
-					lcd {
-						sirf,pins = "lcd_24bitsgrp";
-						sirf,function = "lcd_24bits";
-					};
-				};
-				lcdrom_pins_a: lcdrom0@0 {
-					lcd {
-						sirf,pins = "lcdromgrp";
-						sirf,function = "lcdrom";
-					};
-				};
-				uart0_pins_a: uart0@0 {
-					uart {
-						sirf,pins = "uart0grp";
-						sirf,function = "uart0";
-					};
-				};
-				uart0_noflow_pins_a: uart0@1 {
-					uart {
-						sirf,pins = "uart0_nostreamctrlgrp";
-						sirf,function = "uart0_nostreamctrl";
-					};
-				};
-				uart1_pins_a: uart1@0 {
-					uart {
-						sirf,pins = "uart1grp";
-						sirf,function = "uart1";
-					};
-				};
-				uart2_pins_a: uart2@0 {
-					uart {
-						sirf,pins = "uart2grp";
-						sirf,function = "uart2";
-					};
-				};
-				uart2_noflow_pins_a: uart2@1 {
-					uart {
-						sirf,pins = "uart2_nostreamctrlgrp";
-						sirf,function = "uart2_nostreamctrl";
-					};
-				};
-				spi0_pins_a: spi0@0 {
-					spi {
-						sirf,pins = "spi0grp";
-						sirf,function = "spi0";
-					};
-				};
-				spi1_pins_a: spi1@0 {
-					spi {
-						sirf,pins = "spi1grp";
-						sirf,function = "spi1";
-					};
-				};
-				i2c0_pins_a: i2c0@0 {
-					i2c {
-						sirf,pins = "i2c0grp";
-						sirf,function = "i2c0";
-					};
-				};
-				i2c1_pins_a: i2c1@0 {
-					i2c {
-						sirf,pins = "i2c1grp";
-						sirf,function = "i2c1";
-					};
-				};
-                                pwm0_pins_a: pwm0@0 {
-                                        pwm {
-                                                sirf,pins = "pwm0grp";
-                                                sirf,function = "pwm0";
-                                        };
-                                };
-                                pwm1_pins_a: pwm1@0 {
-                                        pwm {
-                                                sirf,pins = "pwm1grp";
-                                                sirf,function = "pwm1";
-                                        };
-                                };
-                                pwm2_pins_a: pwm2@0 {
-                                        pwm {
-                                                sirf,pins = "pwm2grp";
-                                                sirf,function = "pwm2";
-                                        };
-                                };
-                                pwm3_pins_a: pwm3@0 {
-                                        pwm {
-                                                sirf,pins = "pwm3grp";
-                                                sirf,function = "pwm3";
-                                        };
-                                };
-                                gps_pins_a: gps@0 {
-                                        gps {
-                                                sirf,pins = "gpsgrp";
-                                                sirf,function = "gps";
-                                        };
-                                };
-                                vip_pins_a: vip@0 {
-                                        vip {
-                                                sirf,pins = "vipgrp";
-                                                sirf,function = "vip";
-                                        };
-                                };
-                                sdmmc0_pins_a: sdmmc0@0 {
-                                        sdmmc0 {
-                                                sirf,pins = "sdmmc0grp";
-                                                sirf,function = "sdmmc0";
-                                        };
-                                };
-                                sdmmc1_pins_a: sdmmc1@0 {
-                                        sdmmc1 {
-                                                sirf,pins = "sdmmc1grp";
-                                                sirf,function = "sdmmc1";
-                                        };
-                                };
-                                sdmmc2_pins_a: sdmmc2@0 {
-                                        sdmmc2 {
-                                                sirf,pins = "sdmmc2grp";
-                                                sirf,function = "sdmmc2";
-                                        };
-                                };
-                                sdmmc3_pins_a: sdmmc3@0 {
-                                        sdmmc3 {
-                                                sirf,pins = "sdmmc3grp";
-                                                sirf,function = "sdmmc3";
-                                        };
-                                };
-                                sdmmc4_pins_a: sdmmc4@0 {
-                                        sdmmc4 {
-                                                sirf,pins = "sdmmc4grp";
-                                                sirf,function = "sdmmc4";
-                                        };
-                                };
-                                sdmmc5_pins_a: sdmmc5@0 {
-                                        sdmmc5 {
-                                                sirf,pins = "sdmmc5grp";
-                                                sirf,function = "sdmmc5";
-                                        };
-                                };
-                                i2s_pins_a: i2s@0 {
-                                        i2s {
-                                                sirf,pins = "i2sgrp";
-                                                sirf,function = "i2s";
-                                        };
-                                };
-                                ac97_pins_a: ac97@0 {
-                                        ac97 {
-                                                sirf,pins = "ac97grp";
-                                                sirf,function = "ac97";
-                                        };
-                                };
-                                nand_pins_a: nand@0 {
-                                        nand {
-                                                sirf,pins = "nandgrp";
-                                                sirf,function = "nand";
-                                        };
-                                };
-                                usp0_pins_a: usp0@0 {
-                                        usp0 {
-                                                sirf,pins = "usp0grp";
-                                                sirf,function = "usp0";
-                                        };
-                                };
-				usp0_uart_nostreamctrl_pins_a: usp0@1 {
-                                        usp0 {
-                                                sirf,pins =
-							"usp0_uart_nostreamctrl_grp";
-                                                sirf,function =
-							"usp0_uart_nostreamctrl";
-                                        };
-                                };
-                                usp0_only_utfs_pins_a: usp0@2 {
-                                        usp0 {
-                                                sirf,pins = "usp0_only_utfs_grp";
-                                                sirf,function = "usp0_only_utfs";
-                                        };
-                                };
-                                usp0_only_urfs_pins_a: usp0@3 {
-                                        usp0 {
-                                                sirf,pins = "usp0_only_urfs_grp";
-                                                sirf,function = "usp0_only_urfs";
-                                        };
-                                };
-                                usp1_pins_a: usp1@0 {
-                                        usp1 {
-                                                sirf,pins = "usp1grp";
-                                                sirf,function = "usp1";
-                                        };
-                                };
-				usp1_uart_nostreamctrl_pins_a: usp1@1 {
-                                        usp1 {
-                                                sirf,pins =
-							"usp1_uart_nostreamctrl_grp";
-                                                sirf,function =
-							"usp1_uart_nostreamctrl";
-                                        };
-                                };
-                                usp2_pins_a: usp2@0 {
-                                        usp2 {
-                                                sirf,pins = "usp2grp";
-                                                sirf,function = "usp2";
-                                        };
-                                };
-				usp2_uart_nostreamctrl_pins_a: usp2@1 {
-                                        usp2 {
-                                                sirf,pins =
-							"usp2_uart_nostreamctrl_grp";
-                                                sirf,function =
-							"usp2_uart_nostreamctrl";
-                                        };
-                                };
-                                usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
-                                        usb0_utmi_drvbus {
-                                                sirf,pins = "usb0_utmi_drvbusgrp";
-                                                sirf,function = "usb0_utmi_drvbus";
-                                        };
-                                };
-                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
-                                        usb1_utmi_drvbus {
-                                                sirf,pins = "usb1_utmi_drvbusgrp";
-                                                sirf,function = "usb1_utmi_drvbus";
-                                        };
-                                };
-                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
-                                        usb1_dp_dn {
-                                                sirf,pins = "usb1_dp_dngrp";
-                                                sirf,function = "usb1_dp_dn";
-                                        };
-                                };
-                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
-                                        uart1_route_io_usb1 {
-                                                sirf,pins = "uart1_route_io_usb1grp";
-                                                sirf,function = "uart1_route_io_usb1";
-                                        };
-                                };
-                                warm_rst_pins_a: warm_rst@0 {
-                                        warm_rst {
-                                                sirf,pins = "warm_rstgrp";
-                                                sirf,function = "warm_rst";
-                                        };
-                                };
-                                pulse_count_pins_a: pulse_count@0 {
-                                        pulse_count {
-                                                sirf,pins = "pulse_countgrp";
-                                                sirf,function = "pulse_count";
-                                        };
-                                };
-                                cko0_pins_a: cko0@0 {
-                                        cko0 {
-                                                sirf,pins = "cko0grp";
-                                                sirf,function = "cko0";
-                                        };
-                                };
-                                cko1_pins_a: cko1@0 {
-                                        cko1 {
-                                                sirf,pins = "cko1grp";
-                                                sirf,function = "cko1";
-                                        };
-                                };
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-				clocks = <&clks 21>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-				clocks = <&clks 22>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-				clocks = <&clks 23>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-					status = "disabled";
-					bus-width = <8>;
-					clocks = <&clks 36>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 36>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					clocks = <&clks 37>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					clocks = <&clks 37>;
-				};
-
-				sd4: sdhci@56400000 {
-					cell-index = <4>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56400000 0x100000>;
-					interrupts = <39>;
-					status = "disabled";
-					clocks = <&clks 38>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-					clocks = <&clks 38>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			minigpsrtc@2000 {
-				compatible = "sirf,prima2-minigpsrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-				clocks = <&clks 40>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-				clocks = <&clks 41>;
-			};
-
-			sata@b00f0000 {
-				compatible = "synopsys,dwc-ahsata";
-				reg = <0xb8020000 0x10000>;
-				interrupts = <37>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-				clocks = <&clks 7>;
-			};
-		};
-	};
-};
diff --git a/src/arm/pxa168-aspenite.dts b/src/arm/pxa168-aspenite.dts
deleted file mode 100644
index e762facb3fa4..000000000000
--- a/src/arm/pxa168-aspenite.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-/include/ "pxa168.dtsi"
-
-/ {
-	model = "Marvell PXA168 Aspenite Development Board";
-	compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		reg = <0x00000000 0x04000000>;
-	};
-
-	soc {
-		apb@d4000000 {
-			uart1: uart@d4017000 {
-				status = "okay";
-			};
-			twsi1: i2c@d4011000 {
-				status = "okay";
-			};
-			rtc: rtc@d4010000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/pxa168.dtsi b/src/arm/pxa168.dtsi
deleted file mode 100644
index 975dad21ac38..000000000000
--- a/src/arm/pxa168.dtsi
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		axi@d4200000 {	/* AXI */
-			compatible = "mrvl,axi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			intc: interrupt-controller@d4282000 {
-				compatible = "mrvl,mmp-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-		};
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			timer0: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <13>;
-			};
-
-			uart1: uart@d4017000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4017000 0x1000>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			uart2: uart@d4018000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4018000 0x1000>;
-				interrupts = <28>;
-				status = "disabled";
-			};
-
-			uart3: uart@d4026000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4026000 0x1000>;
-				interrupts = <29>;
-				status = "disabled";
-			};
-
-			gpio@d4019000 {
-				compatible = "marvell,mmp-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <49>;
-				interrupt-names = "gpio_mux";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4025000 {
-				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4025000 0x1000>;
-				interrupts = <58>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/pxa27x.dtsi b/src/arm/pxa27x.dtsi
deleted file mode 100644
index a70546945985..000000000000
--- a/src/arm/pxa27x.dtsi
+++ /dev/null
@@ -1,38 +0,0 @@
-/* The pxa3xx skeleton simply augments the 2xx version */
-/include/ "pxa2xx.dtsi"
-
-/ {
-	model = "Marvell PXA27x familiy SoC";
-	compatible = "marvell,pxa27x";
-
-	pxabus {
-		pxairq: interrupt-controller@40d00000 {
-			marvell,intc-priority;
-			marvell,intc-nr-irqs = <34>;
-		};
-
-		pwm0: pwm@40b00000 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40b00000 0x10>;
-			#pwm-cells = <1>;
-		};
-
-		pwm1: pwm@40b00010 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40b00010 0x10>;
-			#pwm-cells = <1>;
-		};
-
-		pwm2: pwm@40c00000 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40c00000 0x10>;
-			#pwm-cells = <1>;
-		};
-
-		pwm3: pwm@40c00010 {
-			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
-			reg = <0x40c00010 0x10>;
-			#pwm-cells = <1>;
-		};
-	};
-};
diff --git a/src/arm/pxa2xx.dtsi b/src/arm/pxa2xx.dtsi
deleted file mode 100644
index a5e90f078aa9..000000000000
--- a/src/arm/pxa2xx.dtsi
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "Marvell PXA2xx family SoC";
-	compatible = "marvell,pxa2xx";
-	interrupt-parent = <&pxairq>;
-
-	aliases {
-		serial0 = &ffuart;
-		serial1 = &btuart;
-		serial2 = &stuart;
-		serial3 = &hwuart;
-		i2c0 = &pwri2c;
-		i2c1 = &pxai2c1;
-	};
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-		cpu {
-			compatible = "marvell,xscale";
-			device_type = "cpu";
-		};
-	};
-
-	pxabus {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		pxairq: interrupt-controller@40d00000 {
-			#interrupt-cells = <1>;
-			compatible = "marvell,pxa-intc";
-			interrupt-controller;
-			interrupt-parent;
-			marvell,intc-nr-irqs = <32>;
-			reg = <0x40d00000 0xd0>;
-		};
-
-		gpio: gpio@40e00000 {
-			compatible = "mrvl,pxa-gpio";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			reg = <0x40e00000 0x10000>;
-			gpio-controller;
-			#gpio-cells = <0x2>;
-			interrupts = <10>;
-			interrupt-names = "gpio_mux";
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-			ranges;
-
-			gcb0: gpio@40e00000 {
-				reg = <0x40e00000 0x4>;
-			};
-
-			gcb1: gpio@40e00004 {
-				reg = <0x40e00004 0x4>;
-			};
-
-			gcb2: gpio@40e00008 {
-				reg = <0x40e00008 0x4>;
-			};
-			gcb3: gpio@40e0000c {
-				reg = <0x40e0000c 0x4>;
-			};
-		};
-
-		ffuart: uart@40100000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x40100000 0x30>;
-			interrupts = <22>;
-			status = "disabled";
-		};
-
-		btuart: uart@40200000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x40200000 0x30>;
-			interrupts = <21>;
-			status = "disabled";
-		};
-
-		stuart: uart@40700000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x40700000 0x30>;
-			interrupts = <20>;
-			status = "disabled";
-		};
-
-		hwuart: uart@41100000 {
-			compatible = "mrvl,pxa-uart";
-			reg = <0x41100000 0x30>;
-			interrupts = <7>;
-			status = "disabled";
-		};
-
-		pxai2c1: i2c@40301680 {
-			compatible = "mrvl,pxa-i2c";
-			reg = <0x40301680 0x30>;
-			interrupts = <18>;
-			#address-cells = <0x1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usb0: ohci@4c000000 {
-			compatible = "mrvl,pxa-ohci";
-			reg = <0x4c000000 0x10000>;
-			interrupts = <3>;
-			status = "disabled";
-		};
-
-		mmc0: mmc@41100000 {
-			compatible = "mrvl,pxa-mmc";
-			reg = <0x41100000 0x1000>;
-			interrupts = <23>;
-			status = "disabled";
-		};
-
-		rtc@40900000 {
-			compatible = "marvell,pxa-rtc";
-			reg = <0x40900000 0x3c>;
-			interrupts = <30 31>;
-		};
-	};
-};
diff --git a/src/arm/pxa3xx.dtsi b/src/arm/pxa3xx.dtsi
deleted file mode 100644
index 83bb0eff697b..000000000000
--- a/src/arm/pxa3xx.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-/* The pxa3xx skeleton simply augments the 2xx version */
-/include/ "pxa2xx.dtsi"
-
-/ {
-	model = "Marvell PXA3xx familiy SoC";
-	compatible = "marvell,pxa3xx";
-
-	pxabus {
-		pwri2c: i2c@40f500c0 {
-			compatible = "mrvl,pwri2c";
-			reg = <0x40f500c0 0x30>;
-			interrupts = <6>;
-			#address-cells = <0x1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		nand0: nand@43100000 {
-			compatible = "marvell,pxa3xx-nand";
-			reg = <0x43100000 90>;
-			interrupts = <45>;
-			#address-cells = <1>;
-			#size-cells = <1>;	
-			status = "disabled";
-		};
-
-		pxairq: interrupt-controller@40d00000 {
-			marvell,intc-priority;
-			marvell,intc-nr-irqs = <56>;
-		};
-
-		gpio: gpio@40e00000 {
-			compatible = "intel,pxa3xx-gpio";
-			reg = <0x40e00000 0x10000>;
-			interrupt-names = "gpio0", "gpio1", "gpio_mux";
-			interrupts = <8 9 10>;
-			gpio-controller;
-			#gpio-cells = <0x2>;
-			interrupt-controller;
-			#interrupt-cells = <0x2>;
-		};
-	};
-};
diff --git a/src/arm/pxa910-dkb.dts b/src/arm/pxa910-dkb.dts
deleted file mode 100644
index 595492aa5053..000000000000
--- a/src/arm/pxa910-dkb.dts
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/dts-v1/;
-/include/ "pxa910.dtsi"
-
-/ {
-	model = "Marvell PXA910 DKB Development Board";
-	compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
-	};
-
-	memory {
-		reg = <0x00000000 0x10000000>;
-	};
-
-	soc {
-		apb@d4000000 {
-			uart1: uart@d4017000 {
-				status = "okay";
-			};
-			twsi1: i2c@d4011000 {
-				status = "okay";
-
-				pmic: 88pm860x@34 {
-					compatible = "marvell,88pm860x";
-					reg = <0x34>;
-					interrupts = <4>;
-					interrupt-parent = <&intc>;
-					interrupt-controller;
-					#interrupt-cells = <1>;
-
-					marvell,88pm860x-irq-read-clr;
-					marvell,88pm860x-slave-addr = <0x11>;
-
-					regulators {
-						BUCK1 {
-							regulator-min-microvolt = <1000000>;
-							regulator-max-microvolt = <1500000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						BUCK2 {
-							regulator-min-microvolt = <1000000>;
-							regulator-max-microvolt = <1500000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						BUCK3 {
-							regulator-min-microvolt = <1000000>;
-							regulator-max-microvolt = <3000000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO1 {
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <2800000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO2 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO3 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO4 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-						LDO5 {
-							regulator-min-microvolt = <2900000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO6 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO7 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <2900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO8 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <2900000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO9 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO10 {
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-boot-on;
-							regulator-always-on;
-						};
-						LDO12 {
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-						LDO13 {
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-						LDO14 {
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-					};
-					rtc {
-						marvell,88pm860x-vrtc = <1>;
-					};
-					touch {
-						marvell,88pm860x-gpadc-prebias = <1>;
-						marvell,88pm860x-gpadc-slot-cycle = <1>;
-						marvell,88pm860x-tsi-prebias = <6>;
-						marvell,88pm860x-pen-prebias = <16>;
-						marvell,88pm860x-pen-prechg = <2>;
-						marvell,88pm860x-resistor-X = <300>;
-					};
-					backlights {
-						backlight-0 {
-							marvell,88pm860x-iset = <4>;
-							marvell,88pm860x-pwm = <3>;
-						};
-						backlight-2 {
-						};
-					};
-					leds {
-						led0-red {
-							marvell,88pm860x-iset = <12>;
-						};
-						led0-green {
-							marvell,88pm860x-iset = <12>;
-						};
-						led0-blue {
-							marvell,88pm860x-iset = <12>;
-						};
-					};
-				};
-			};
-			rtc: rtc@d4010000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/pxa910.dtsi b/src/arm/pxa910.dtsi
deleted file mode 100644
index 0247c622f580..000000000000
--- a/src/arm/pxa910.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  Copyright (C) 2012 Marvell Technology Group Ltd.
- *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		i2c0 = &twsi1;
-		i2c1 = &twsi2;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		L2: l2-cache {
-			compatible = "marvell,tauros2-cache";
-			marvell,tauros2-cache-features = <0x3>;
-		};
-
-		axi@d4200000 {	/* AXI */
-			compatible = "mrvl,axi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4200000 0x00200000>;
-			ranges;
-
-			intc: interrupt-controller@d4282000 {
-				compatible = "mrvl,mmp-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd4282000 0x1000>;
-				mrvl,intc-nr-irqs = <64>;
-			};
-
-		};
-
-		apb@d4000000 {	/* APB */
-			compatible = "mrvl,apb-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd4000000 0x00200000>;
-			ranges;
-
-			timer0: timer@d4014000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4014000 0x100>;
-				interrupts = <13>;
-			};
-
-			timer1: timer@d4016000 {
-				compatible = "mrvl,mmp-timer";
-				reg = <0xd4016000 0x100>;
-				interrupts = <29>;
-				status = "disabled";
-			};
-
-			uart1: uart@d4017000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4017000 0x1000>;
-				interrupts = <27>;
-				status = "disabled";
-			};
-
-			uart2: uart@d4018000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4018000 0x1000>;
-				interrupts = <28>;
-				status = "disabled";
-			};
-
-			uart3: uart@d4036000 {
-				compatible = "mrvl,mmp-uart";
-				reg = <0xd4036000 0x1000>;
-				interrupts = <59>;
-				status = "disabled";
-			};
-
-			gpio@d4019000 {
-				compatible = "marvell,mmp-gpio";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xd4019000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupts = <49>;
-				interrupt-names = "gpio_mux";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				ranges;
-
-				gcb0: gpio@d4019000 {
-					reg = <0xd4019000 0x4>;
-				};
-
-				gcb1: gpio@d4019004 {
-					reg = <0xd4019004 0x4>;
-				};
-
-				gcb2: gpio@d4019008 {
-					reg = <0xd4019008 0x4>;
-				};
-
-				gcb3: gpio@d4019100 {
-					reg = <0xd4019100 0x4>;
-				};
-			};
-
-			twsi1: i2c@d4011000 {
-				compatible = "mrvl,mmp-twsi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xd4011000 0x1000>;
-				interrupts = <7>;
-				mrvl,i2c-fast-mode;
-				status = "disabled";
-			};
-
-			twsi2: i2c@d4037000 {
-				compatible = "mrvl,mmp-twsi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0xd4037000 0x1000>;
-				interrupts = <54>;
-				status = "disabled";
-			};
-
-			rtc: rtc@d4010000 {
-				compatible = "mrvl,mmp-rtc";
-				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
-				interrupt-names = "rtc 1Hz", "rtc alarm";
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/qcom-apq8064-ifc6410.dts b/src/arm/qcom-apq8064-ifc6410.dts
deleted file mode 100644
index 7c2441d526bc..000000000000
--- a/src/arm/qcom-apq8064-ifc6410.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-#include "qcom-apq8064-v2.0.dtsi"
-
-/ {
-	model = "Qualcomm APQ8064/IFC6410";
-	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
-
-	soc {
-		gsbi@16600000 {
-			status = "ok";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "ok";
-			};
-		};
-	};
-};
diff --git a/src/arm/qcom-apq8064-v2.0.dtsi b/src/arm/qcom-apq8064-v2.0.dtsi
deleted file mode 100644
index 935c3945fc5e..000000000000
--- a/src/arm/qcom-apq8064-v2.0.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-#include "qcom-apq8064.dtsi"
diff --git a/src/arm/qcom-apq8064.dtsi b/src/arm/qcom-apq8064.dtsi
deleted file mode 100644
index 92bf793622c3..000000000000
--- a/src/arm/qcom-apq8064.dtsi
+++ /dev/null
@@ -1,170 +0,0 @@
-/dts-v1/;
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	model = "Qualcomm APQ8064";
-	compatible = "qcom,apq8064";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-		};
-
-		cpu@2 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
-		};
-
-		cpu@3 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x80000>;
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc2: clock-controller@20a8000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc3: clock-controller@20b8000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw2: regulator@20a9000 {
-			compatible = "qcom,saw2";
-			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw3: regulator@20b9000 {
-			compatible = "qcom,saw2";
-			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		gsbi7: gsbi@16600000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
-				interrupts = <0 158 0x0>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-apq8064";
-			reg = <0x00900000 0x4000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-	};
-};
diff --git a/src/arm/qcom-apq8074-dragonboard.dts b/src/arm/qcom-apq8074-dragonboard.dts
deleted file mode 100644
index b4dfb01fe6fb..000000000000
--- a/src/arm/qcom-apq8074-dragonboard.dts
+++ /dev/null
@@ -1,45 +0,0 @@
-#include "qcom-msm8974.dtsi"
-
-/ {
-	model = "Qualcomm APQ8074 Dragonboard";
-	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
-
-	soc {
-		serial@f991e000 {
-			status = "ok";
-		};
-
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "ok";
-		};
-
-		sdhci@f98a4900 {
-			cd-gpios = <&msmgpio 62 0x1>;
-			bus-width = <4>;
-		};
-
-
-		pinctrl@fd510000 {
-			spi8_default: spi8_default {
-				mosi {
-					pins = "gpio45";
-					function = "blsp_spi8";
-				};
-				miso {
-					pins = "gpio46";
-					function = "blsp_spi8";
-				};
-				cs {
-					pins = "gpio47";
-					function = "blsp_spi8";
-				};
-				clk {
-					pins = "gpio48";
-					function = "blsp_spi8";
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/qcom-apq8084-mtp.dts b/src/arm/qcom-apq8084-mtp.dts
deleted file mode 100644
index 9dae3878b71d..000000000000
--- a/src/arm/qcom-apq8084-mtp.dts
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "qcom-apq8084.dtsi"
-
-/ {
-	model = "Qualcomm APQ 8084-MTP";
-	compatible = "qcom,apq8084-mtp", "qcom,apq8084";
-};
diff --git a/src/arm/qcom-apq8084.dtsi b/src/arm/qcom-apq8084.dtsi
deleted file mode 100644
index e3e009a5912b..000000000000
--- a/src/arm/qcom-apq8084.dtsi
+++ /dev/null
@@ -1,179 +0,0 @@
-/dts-v1/;
-
-#include "skeleton.dtsi"
-
-/ {
-	model = "Qualcomm APQ 8084";
-	compatible = "qcom,apq8084";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <0>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <1>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <2>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "qcom,krait";
-			reg = <3>;
-			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-		};
-
-		L2: l2-cache {
-			compatible = "qcom,arch-cache";
-			cache-level = <2>;
-			qcom,saw = <&saw_l2>;
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 7 0xf04>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-		};
-
-		timer@f9020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <0 8 0x4>,
-					     <0 7 0x4>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <0 9 0x4>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <0 10 0x4>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <0 11 0x4>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <0 12 0x4>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <0 13 0x4>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <0 14 0x4>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		saw_l2: regulator@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
-		acc0: clock-controller@f9088000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9088000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc1: clock-controller@f9098000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9098000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc2: clock-controller@f90a8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90a8000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		acc3: clock-controller@f90b8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90b8000 0x1000>,
-			      <0xf9008000 0x1000>;
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-	};
-};
diff --git a/src/arm/qcom-msm8660-surf.dts b/src/arm/qcom-msm8660-surf.dts
deleted file mode 100644
index 45180adfadf1..000000000000
--- a/src/arm/qcom-msm8660-surf.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-#include "qcom-msm8660.dtsi"
-
-/ {
-	model = "Qualcomm MSM8660 SURF";
-	compatible = "qcom,msm8660-surf", "qcom,msm8660";
-
-	soc {
-		gsbi@19c00000 {
-			status = "ok";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@19c40000 {
-				status = "ok";
-			};
-		};
-	};
-};
diff --git a/src/arm/qcom-msm8660.dtsi b/src/arm/qcom-msm8660.dtsi
deleted file mode 100644
index 53837aaa2f72..000000000000
--- a/src/arm/qcom-msm8660.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8660.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	model = "Qualcomm MSM8660";
-	compatible = "qcom,msm8660";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "qcom,scorpion";
-			enable-method = "qcom,gcc-msm8660";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,scorpion";
-			enable-method = "qcom,gcc-msm8660";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@2080000 {
-			compatible = "qcom,msm-8660-qgic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = < 0x02080000 0x1000 >,
-			      < 0x02081000 0x1000 >;
-		};
-
-		timer@2000000 {
-			compatible = "qcom,scss-timer", "qcom,msm-timer";
-			interrupts = <1 0 0x301>,
-				     <1 1 0x301>,
-				     <1 2 0x301>;
-			reg = <0x02000000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x40000>;
-		};
-
-		msmgpio: gpio@800000 {
-			compatible = "qcom,msm-gpio";
-			reg = <0x00800000 0x4000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpio = <173>;
-			interrupts = <0 16 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-msm8660";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
-		};
-
-		gsbi12: gsbi@19c00000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			reg = <0x19c00000 0x100>;
-			clocks = <&gcc GSBI12_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			serial@19c40000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x19c40000 0x1000>,
-				      <0x19c00000 0x1000>;
-				interrupts = <0 195 0x0>;
-				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-	};
-};
diff --git a/src/arm/qcom-msm8960-cdp.dts b/src/arm/qcom-msm8960-cdp.dts
deleted file mode 100644
index 8f75cc4c8340..000000000000
--- a/src/arm/qcom-msm8960-cdp.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-#include "qcom-msm8960.dtsi"
-
-/ {
-	model = "Qualcomm MSM8960 CDP";
-	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
-
-	soc {
-		gsbi@16400000 {
-			status = "ok";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16440000 {
-				status = "ok";
-			};
-		};
-	};
-};
diff --git a/src/arm/qcom-msm8960.dtsi b/src/arm/qcom-msm8960.dtsi
deleted file mode 100644
index 5303e53e34dc..000000000000
--- a/src/arm/qcom-msm8960.dtsi
+++ /dev/null
@@ -1,155 +0,0 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-/ {
-	model = "Qualcomm MSM8960";
-	compatible = "qcom,msm8960";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <1 14 0x304>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
-		qcom,no-pc-write;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
-			cpu-offset = <0x80000>;
-		};
-
-		msmgpio: gpio@800000 {
-			compatible = "qcom,msm-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpio = <150>;
-			interrupts = <0 16 0x4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x800000 0x4000>;
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-msm8960";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x900000 0x4000>;
-		};
-
-		clock-controller@4000000 {
-			compatible = "qcom,mmcc-msm8960";
-			reg = <0x4000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		acc1: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-		};
-
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		gsbi5: gsbi@16400000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			reg = <0x16400000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			serial@16440000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16440000 0x1000>,
-				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
-	};
-};
diff --git a/src/arm/qcom-msm8974.dtsi b/src/arm/qcom-msm8974.dtsi
deleted file mode 100644
index 69dca2aca25a..000000000000
--- a/src/arm/qcom-msm8974.dtsi
+++ /dev/null
@@ -1,240 +0,0 @@
-/dts-v1/;
-
-#include "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8974.h>
-
-/ {
-	model = "Qualcomm MSM8974";
-	compatible = "qcom,msm8974";
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <1 9 0xf04>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc0>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc1>;
-		};
-
-		cpu@2 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc2>;
-		};
-
-		cpu@3 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v2";
-			device_type = "cpu";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acc3>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			qcom,saw = <&saw_l2>;
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <1 7 0xf04>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		intc: interrupt-controller@f9000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0xf9000000 0x1000>,
-			      <0xf9002000 0x1000>;
-		};
-
-		timer@f9020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0xf9020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame@f9021000 {
-				frame-number = <0>;
-				interrupts = <0 8 0x4>,
-					     <0 7 0x4>;
-				reg = <0xf9021000 0x1000>,
-				      <0xf9022000 0x1000>;
-			};
-
-			frame@f9023000 {
-				frame-number = <1>;
-				interrupts = <0 9 0x4>;
-				reg = <0xf9023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9024000 {
-				frame-number = <2>;
-				interrupts = <0 10 0x4>;
-				reg = <0xf9024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9025000 {
-				frame-number = <3>;
-				interrupts = <0 11 0x4>;
-				reg = <0xf9025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9026000 {
-				frame-number = <4>;
-				interrupts = <0 12 0x4>;
-				reg = <0xf9026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9027000 {
-				frame-number = <5>;
-				interrupts = <0 13 0x4>;
-				reg = <0xf9027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame@f9028000 {
-				frame-number = <6>;
-				interrupts = <0 14 0x4>;
-				reg = <0xf9028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		saw_l2: regulator@f9012000 {
-			compatible = "qcom,saw2";
-			reg = <0xf9012000 0x1000>;
-			regulator;
-		};
-
-		acc0: clock-controller@f9088000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc1: clock-controller@f9098000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc2: clock-controller@f90a8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		acc3: clock-controller@f90b8000 {
-			compatible = "qcom,kpss-acc-v2";
-			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
-		};
-
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
-
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0xfc400000 0x4000>;
-		};
-
-		mmcc: clock-controller@fd8c0000 {
-			compatible = "qcom,mmcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0xfd8c0000 0x6000>;
-		};
-
-		serial@f991e000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0xf991e000 0x1000>;
-			interrupts = <0 108 0x0>;
-			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		sdhci@f9824900 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 123 0>, <0 138 0>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		sdhci@f98a4900 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 125 0>, <0 221 0>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		rng@f9bff000 {
-			compatible = "qcom,prng";
-			reg = <0xf9bff000 0x200>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-		};
-
-		msmgpio: pinctrl@fd510000 {
-			compatible = "qcom,msm8974-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <0 208 0>;
-		};
-	};
-};
diff --git a/src/arm/r7s72100-genmai-reference.dts b/src/arm/r7s72100-genmai-reference.dts
deleted file mode 100644
index da19c70ed82b..000000000000
--- a/src/arm/r7s72100-genmai-reference.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Device Tree Source for the Genmai board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-/include/ "r7s72100.dtsi"
-
-/ {
-	model = "Genmai";
-	compatible = "renesas,genmai-reference", "renesas,r7s72100";
-
-	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x08000000 0x08000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/src/arm/r7s72100-genmai.dts b/src/arm/r7s72100-genmai.dts
deleted file mode 100644
index 20705467f4c9..000000000000
--- a/src/arm/r7s72100-genmai.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Device Tree Source for the Genmai board
- *
- * Copyright (C) 2013-14 Renesas Solutions Corp.
- * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r7s72100.dtsi"
-
-/ {
-	model = "Genmai";
-	compatible = "renesas,genmai", "renesas,r7s72100";
-
-	aliases {
-		serial2 = &scif2;
-	};
-
-	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x08000000 0x08000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <13330000>;
-};
-
-&usb_x1_clk {
-	clock-frequency = <48000000>;
-};
-
-&i2c2 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	eeprom@50 {
-		compatible = "renesas,24c128";
-		reg = <0x50>;
-		pagesize = <64>;
-	};
-};
-
-&scif2 {
-	status = "okay";
-};
-
-&spi4 {
-	status = "okay";
-
-	codec: codec@0 {
-		compatible = "wlf,wm8978";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-	};
-};
diff --git a/src/arm/r7s72100.dtsi b/src/arm/r7s72100.dtsi
deleted file mode 100644
index bdee22541189..000000000000
--- a/src/arm/r7s72100.dtsi
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * Device Tree Source for the r7s72100 SoC
- *
- * Copyright (C) 2013-14 Renesas Solutions Corp.
- * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/clock/r7s72100-clock.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r7s72100";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		spi2 = &spi2;
-		spi3 = &spi3;
-		spi4 = &spi4;
-	};
-
-	clocks {
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* External clocks */
-		extal_clk: extal_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			/* If clk present, value must be set by board */
-			clock-frequency = <0>;
-			clock-output-names = "extal";
-		};
-
-		usb_x1_clk: usb_x1_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			/* If clk present, value must be set by board */
-			clock-frequency = <0>;
-			clock-output-names = "usb_x1";
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: cpg_clocks@fcfe0000 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-cpg-clocks",
-				     "renesas,rz-cpg-clocks";
-			reg = <0xfcfe0000 0x18>;
-			clocks = <&extal_clk>, <&usb_x1_clk>;
-			clock-output-names = "pll", "i", "g";
-		};
-
-		/* Fixed factor clocks */
-		b_clk: b_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
-			clock-mult = <1>;
-			clock-div = <3>;
-			clock-output-names = "b";
-		};
-		p1_clk: p1_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
-			clock-mult = <1>;
-			clock-div = <6>;
-			clock-output-names = "p1";
-		};
-		p0_clk: p0_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
-			clock-mult = <1>;
-			clock-div = <12>;
-			clock-output-names = "p0";
-		};
-
-		/* MSTP clocks */
-		mstp3_clks: mstp3_clks@fcfe0420 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0420 4>;
-			clocks = <&p0_clk>;
-			clock-indices = <R7S72100_CLK_MTU2>;
-			clock-output-names = "mtu2";
-		};
-
-		mstp4_clks: mstp4_clks@fcfe0424 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0424 4>;
-			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
-				 <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
-			clock-indices = <
-				R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3
-				R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7
-			>;
-			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
-		};
-
-		mstp9_clks: mstp9_clks@fcfe0438 {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe0438 4>;
-			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>;
-			clock-indices = <
-				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
-			>;
-			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
-		};
-
-		mstp10_clks: mstp10_clks@fcfe043c {
-			#clock-cells = <1>;
-			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0xfcfe043c 4>;
-			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
-				 <&p1_clk>;
-			clock-indices = <
-				R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3
-				R7S72100_CLK_SPI4
-			>;
-			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <400000000>;
-		};
-	};
-
-	gic: interrupt-controller@e8201000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0xe8201000 0x1000>,
-			<0xe8202000 0x1000>;
-	};
-
-	i2c0: i2c@fcfee000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-		reg = <0xfcfee000 0x44>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 158 IRQ_TYPE_EDGE_RISING>,
-			     <0 159 IRQ_TYPE_EDGE_RISING>,
-			     <0 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 164 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@fcfee400 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-		reg = <0xfcfee400 0x44>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 166 IRQ_TYPE_EDGE_RISING>,
-			     <0 167 IRQ_TYPE_EDGE_RISING>,
-			     <0 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 169 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 170 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 171 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@fcfee800 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-		reg = <0xfcfee800 0x44>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 174 IRQ_TYPE_EDGE_RISING>,
-			     <0 175 IRQ_TYPE_EDGE_RISING>,
-			     <0 176 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 177 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 178 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 179 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 180 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@fcfeec00 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-		reg = <0xfcfeec00 0x44>;
-		interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 182 IRQ_TYPE_EDGE_RISING>,
-			     <0 183 IRQ_TYPE_EDGE_RISING>,
-			     <0 184 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 185 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 186 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 187 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 188 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	scif0: serial@e8007000 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8007000 64>;
-		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 191 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 192 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 189 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif1: serial@e8007800 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8007800 64>;
-		interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 195 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 196 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 193 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif2: serial@e8008000 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8008000 64>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 200 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 197 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif3: serial@e8008800 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8008800 64>;
-		interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 203 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 204 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 201 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif4: serial@e8009000 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8009000 64>;
-		interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 207 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 208 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 205 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif5: serial@e8009800 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe8009800 64>;
-		interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 211 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 212 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 209 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif6: serial@e800a000 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe800a000 64>;
-		interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 215 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 216 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 213 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif7: serial@e800a800 {
-		compatible = "renesas,scif-r7s72100", "renesas,scif";
-		reg = <0xe800a800 64>;
-		interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 219 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 220 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 217 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	spi0: spi@e800c800 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800c800 0x24>;
-		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi1: spi@e800d000 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800d000 0x24>;
-		interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 242 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 243 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi2: spi@e800d800 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800d800 0x24>;
-		interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 245 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 246 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi3: spi@e800e000 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800e000 0x24>;
-		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 248 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 249 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	spi4: spi@e800e800 {
-		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
-		reg = <0xe800e800 0x24>;
-		interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 251 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 252 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "error", "rx", "tx";
-		clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/r8a73a4-ape6evm-reference.dts b/src/arm/r8a73a4-ape6evm-reference.dts
deleted file mode 100644
index a860f32bca27..000000000000
--- a/src/arm/r8a73a4-ape6evm-reference.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Device Tree Source for the APE6EVM board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a73a4.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "APE6EVM";
-	compatible = "renesas,ape6evm-reference", "renesas,r8a73a4";
-
-	aliases {
-		serial0 = &scifa0;
-	};
-
-	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel rw";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	vcc_mmc0: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "MMC0 Vcc";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-	};
-
-	vcc_sdhi0: regulator@1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	/* Common 3.3V rail, used by several devices on APE6EVM */
-	ape6evm_fixed_3v3: regulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	lbsc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x80000000>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-	vdd_dvfs: max8973@1b {
-		compatible = "maxim,max8973";
-		reg = <0x1b>;
-
-		regulator-min-microvolt = <935000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-	operating-points = <
-		/* kHz  uV */
-		1950000 1115000
-		1462500  995000
-	>;
-	voltage-tolerance = <1>; /* 1% */
-};
-
-&pfc {
-	scifa0_pins: serial0 {
-		renesas,groups = "scifa0_data";
-		renesas,function = "scifa0";
-	};
-
-	mmc0_pins: mmc {
-		renesas,groups = "mmc0_data8", "mmc0_ctrl";
-		renesas,function = "mmc0";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi1_pins: sd1 {
-		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
-		renesas,function = "sdhi1";
-	};
-};
-
-&mmcif0 {
-	vmmc-supply = <&vcc_mmc0>;
-	bus-width = <8>;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	status = "okay";
-};
-
-&scifa0 {
-	pinctrl-0 = <&scifa0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	vmmc-supply = <&vcc_sdhi0>;
-	bus-width = <4>;
-	toshiba,mmc-wrprotect-disable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhi0_pins>;
-	status = "okay";
-};
-
-&sdhi1 {
-	vmmc-supply = <&ape6evm_fixed_3v3>;
-	bus-width = <4>;
-	broken-cd;
-	toshiba,mmc-wrprotect-disable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhi1_pins>;
-	status = "okay";
-};
diff --git a/src/arm/r8a73a4-ape6evm.dts b/src/arm/r8a73a4-ape6evm.dts
deleted file mode 100644
index ce085fa444a1..000000000000
--- a/src/arm/r8a73a4-ape6evm.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Device Tree Source for the APE6EVM board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a73a4.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "APE6EVM";
-	compatible = "renesas,ape6evm", "renesas,r8a73a4";
-
-	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	ape6evm_fixed_3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ethernet@8000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <0x08000000 0x1000>;
-			interrupt-parent = <&irqc1>;
-			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&ape6evm_fixed_3v3>;
-			vddvario-supply = <&ape6evm_fixed_3v3>;
-		};
-	};
-};
-
-&i2c5 {
-	status = "okay";
-	vdd_dvfs: max8973@1b {
-		compatible = "maxim,max8973";
-		reg = <0x1b>;
-
-		regulator-min-microvolt = <935000>;
-		regulator-max-microvolt = <1200000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-	operating-points = <
-		/* kHz  uV */
-		1950000 1115000
-		1462500  995000
-	>;
-	voltage-tolerance = <1>; /* 1% */
-};
diff --git a/src/arm/r8a73a4.dtsi b/src/arm/r8a73a4.dtsi
deleted file mode 100644
index d8ec5058c351..000000000000
--- a/src/arm/r8a73a4.dtsi
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Device Tree Source for the r8a73a4 SoC
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a73a4";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1500000000>;
-		};
-	};
-
-	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0xf1001000 0 0x1000>,
-			<0 0xf1002000 0 0x1000>,
-			<0 0xf1004000 0 0x2000>,
-			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	irqc0: interrupt-controller@e61c0000 {
-		compatible = "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 5 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 6 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 7 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 8 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 10 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 11 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 22 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 23 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	irqc1: interrupt-controller@e61c0200 {
-		compatible = "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0200 0 0x200>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 50 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 57 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	dmac: dma-multiplexer@0 {
-		compatible = "renesas,shdma-mux";
-		#dma-cells = <1>;
-		dma-channels = <20>;
-		dma-requests = <256>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dma0: dma-controller@e6700020 {
-			compatible = "renesas,shdma-r8a73a4";
-			reg = <0 0xe6700020 0 0x89e0>;
-			interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-					0 200 IRQ_TYPE_LEVEL_HIGH
-					0 201 IRQ_TYPE_LEVEL_HIGH
-					0 202 IRQ_TYPE_LEVEL_HIGH
-					0 203 IRQ_TYPE_LEVEL_HIGH
-					0 204 IRQ_TYPE_LEVEL_HIGH
-					0 205 IRQ_TYPE_LEVEL_HIGH
-					0 206 IRQ_TYPE_LEVEL_HIGH
-					0 207 IRQ_TYPE_LEVEL_HIGH
-					0 208 IRQ_TYPE_LEVEL_HIGH
-					0 209 IRQ_TYPE_LEVEL_HIGH
-					0 210 IRQ_TYPE_LEVEL_HIGH
-					0 211 IRQ_TYPE_LEVEL_HIGH
-					0 212 IRQ_TYPE_LEVEL_HIGH
-					0 213 IRQ_TYPE_LEVEL_HIGH
-					0 214 IRQ_TYPE_LEVEL_HIGH
-					0 215 IRQ_TYPE_LEVEL_HIGH
-					0 216 IRQ_TYPE_LEVEL_HIGH
-					0 217 IRQ_TYPE_LEVEL_HIGH
-					0 218 IRQ_TYPE_LEVEL_HIGH
-					0 219 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					"ch0", "ch1", "ch2", "ch3",
-					"ch4", "ch5", "ch6", "ch7",
-					"ch8", "ch9", "ch10", "ch11",
-					"ch12", "ch13", "ch14", "ch15",
-					"ch16", "ch17", "ch18", "ch19";
-		};
-	};
-
-	thermal@e61f0000 {
-		compatible = "renesas,rcar-thermal";
-		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
-			 <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	i2c0: i2c@e6500000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6500000 0 0x428>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6510000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6510000 0 0x428>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@e6520000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6520000 0 0x428>;
-		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@e6530000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6530000 0 0x428>;
-		interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@e6540000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6540000 0 0x428>;
-		interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c5: i2c@e60b0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe60b0000 0 0x428>;
-		interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c6: i2c@e6550000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6550000 0 0x428>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c7: i2c@e6560000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6560000 0 0x428>;
-		interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c8: i2c@e6570000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0 0xe6570000 0 0x428>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
-		reg = <0 0xe6c40000 0 0x100>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
-		reg = <0 0xe6c50000 0 0x100>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb2: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6c20000 0 0x100>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb3: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6c30000 0 0x100>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb4: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 0x100>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb5: serial@e6cf0000 {
-		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
-		reg = <0 0xe6cf0000 0 0x100>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	mmcif0: mmc@ee200000 {
-		compatible = "renesas,sh-mmcif";
-		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	mmcif1: mmc@ee220000 {
-		compatible = "renesas,sh-mmcif";
-		reg = <0 0xee220000 0 0x80>;
-		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	pfc: pfc@e6050000 {
-		compatible = "renesas,pfc-r8a73a4";
-		reg = <0 0xe6050000 0 0x9000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts-extended =
-			<&irqc0  0 0>, <&irqc0  1 0>, <&irqc0  2 0>, <&irqc0  3 0>,
-			<&irqc0  4 0>, <&irqc0  5 0>, <&irqc0  6 0>, <&irqc0  7 0>,
-			<&irqc0  8 0>, <&irqc0  9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
-			<&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
-			<&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
-			<&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
-			<&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
-			<&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
-			<&irqc1  0 0>, <&irqc1  1 0>, <&irqc1  2 0>, <&irqc1  3 0>,
-			<&irqc1  4 0>, <&irqc1  5 0>, <&irqc1  6 0>, <&irqc1  7 0>,
-			<&irqc1  8 0>, <&irqc1  9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
-			<&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
-			<&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
-			<&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
-			<&irqc1 24 0>, <&irqc1 25 0>;
-	};
-
-	sdhi0: sd@ee100000 {
-		compatible = "renesas,sdhi-r8a73a4";
-		reg = <0 0xee100000 0 0x100>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi1: sd@ee120000 {
-		compatible = "renesas,sdhi-r8a73a4";
-		reg = <0 0xee120000 0 0x100>;
-		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ee140000 {
-		compatible = "renesas,sdhi-r8a73a4";
-		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/r8a7740-armadillo800eva-reference.dts b/src/arm/r8a7740-armadillo800eva-reference.dts
deleted file mode 100644
index ee9e7d5c97a9..000000000000
--- a/src/arm/r8a7740-armadillo800eva-reference.dts
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * Reference Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "armadillo 800 eva reference";
-	compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
-
-	aliases {
-		serial1 = &scifa1;
-	};
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reg_3p3v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_sdhi0: regulator@1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator@2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_sdhi0>;
-
-		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
-		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
-		states = <3300000 0
-			  1800000 1>;
-
-		enable-active-high;
-	};
-
-	reg_5p0v: regulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5.0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "SW3";
-			gpio-key,wakeup;
-		};
-
-		back-key {
-			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "SW4";
-		};
-
-		menu-key {
-			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_MENU>;
-			label = "SW5";
-		};
-
-		home-key {
-			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "SW6";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led3 {
-			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
-			label = "LED3";
-		};
-		led4 {
-			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
-			label = "LED4";
-		};
-		led5 {
-			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
-			label = "LED5";
-		};
-		led6 {
-			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
-			label = "LED6";
-		};
-	};
-
-	i2c2: i2c@2 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
-			 &pfc 91 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
-		default-brightness-level = <9>;
-		pinctrl-0 = <&backlight_pins>;
-		pinctrl-names = "default";
-		power-supply = <&reg_5p0v>;
-		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "i2s";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sh_fsi2 0>;
-			bitclock-inversion;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&wm8978>;
-			bitclock-master;
-			frame-master;
-			system-clock-frequency = <12288000>;
-		};
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy0>;
-	status = "ok";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	touchscreen@55 {
-		compatible = "sitronix,st1232";
-		reg = <0x55>;
-		interrupt-parent = <&irqpin1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&st1232_pins>;
-		pinctrl-names = "default";
-		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
-	};
-
-	wm8978: wm8978@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8978";
-		reg = <0x1a>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	rtc@30 {
-		compatible = "sii,s35390a";
-		reg = <0x30>;
-	};
-};
-
-&pfc {
-	ether_pins: ether {
-		renesas,groups = "gether_mii", "gether_int";
-		renesas,function = "gether";
-	};
-
-	scifa1_pins: serial1 {
-		renesas,groups = "scifa1_data";
-		renesas,function = "scifa1";
-	};
-
-	st1232_pins: touchscreen {
-		renesas,groups = "intc_irq10";
-		renesas,function = "intc";
-	};
-
-	backlight_pins: backlight {
-		renesas,groups = "tpu0_to2_1";
-		renesas,function = "tpu0";
-	};
-
-	mmc0_pins: mmc0 {
-		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
-		renesas,function = "mmc0";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
-		renesas,function = "sdhi0";
-	};
-
-	fsia_pins: sounda {
-		renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
-				 "fsia_data_in_1", "fsia_data_out_0";
-		renesas,function = "fsia";
-	};
-};
-
-&tpu {
-	status = "okay";
-};
-
-&mmcif0 {
-	pinctrl-0 = <&mmc0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&reg_3p3v>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&scifa1 {
-	pinctrl-0 = <&scifa1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	bus-width = <4>;
-	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sh_fsi2 {
-	pinctrl-0 = <&fsia_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/src/arm/r8a7740-armadillo800eva.dts b/src/arm/r8a7740-armadillo800eva.dts
deleted file mode 100644
index a06a11e1a840..000000000000
--- a/src/arm/r8a7740-armadillo800eva.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-
-/ {
-	model = "armadillo 800 eva";
-	compatible = "renesas,armadillo800eva";
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-};
diff --git a/src/arm/r8a7740.dtsi b/src/arm/r8a7740.dtsi
deleted file mode 100644
index bda18fb3d9e5..000000000000
--- a/src/arm/r8a7740.dtsi
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * Device Tree Source for the r8a7740 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7740";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0x0>;
-			clock-frequency = <800000000>;
-		};
-	};
-
-	gic: interrupt-controller@c2800000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xc2800000 0x1000>,
-		      <0xc2000000 0x1000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* irqpin0: IRQ0 - IRQ7 */
-	irqpin0: irqpin@e6900000 {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900000 4>,
-			<0xe6900010 4>,
-			<0xe6900020 1>,
-			<0xe6900040 1>,
-			<0xe6900060 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* irqpin1: IRQ8 - IRQ15 */
-	irqpin1: irqpin@e6900004 {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900004 4>,
-			<0xe6900014 4>,
-			<0xe6900024 1>,
-			<0xe6900044 1>,
-			<0xe6900064 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* irqpin2: IRQ16 - IRQ23 */
-	irqpin2: irqpin@e6900008 {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900008 4>,
-			<0xe6900018 4>,
-			<0xe6900028 1>,
-			<0xe6900048 1>,
-			<0xe6900068 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* irqpin3: IRQ24 - IRQ31 */
-	irqpin3: irqpin@e690000c {
-		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe690000c 4>,
-			<0xe690001c 4>,
-			<0xe690002c 1>,
-			<0xe690004c 1>,
-			<0xe690006c 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	ether: ethernet@e9a00000 {
-		compatible = "renesas,gether-r8a7740";
-		reg = <0xe9a00000 0x800>,
-		      <0xe9a01800 0x800>;
-		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
-		/* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */
-		phy-mode = "mii";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c0: i2c@fff20000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
-		reg = <0xfff20000 0x425>;
-		interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6c20000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
-		reg = <0xe6c20000 0x425>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
-			      0 71 IRQ_TYPE_LEVEL_HIGH
-			      0 72 IRQ_TYPE_LEVEL_HIGH
-			      0 73 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c40000 0x100>;
-		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c50000 0x100>;
-		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c60000 0x100>;
-		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c70000 0x100>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa4: serial@e6c80000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6c80000 0x100>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa5: serial@e6cb0000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6cb0000 0x100>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa6: serial@e6cc0000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6cc0000 0x100>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa7: serial@e6cd0000 {
-		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
-		reg = <0xe6cd0000 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb8: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7740", "renesas,scifb";
-		reg = <0xe6c30000 0x100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	pfc: pfc@e6050000 {
-		compatible = "renesas,pfc-r8a7740";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605800c 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts-extended =
-			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
-			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
-			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
-			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
-			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
-			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
-			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
-			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
-	};
-
-	tpu: pwm@e6600000 {
-		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
-		reg = <0xe6600000 0x100>;
-		status = "disabled";
-		#pwm-cells = <3>;
-	};
-
-	mmcif0: mmc@e6bd0000 {
-		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
-		reg = <0xe6bd0000 0x100>;
-		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
-			      0 57 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	sdhi0: sd@e6850000 {
-		compatible = "renesas,sdhi-r8a7740";
-		reg = <0xe6850000 0x100>;
-		interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
-			      0 118 IRQ_TYPE_LEVEL_HIGH
-			      0 119 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi1: sd@e6860000 {
-		compatible = "renesas,sdhi-r8a7740";
-		reg = <0xe6860000 0x100>;
-		interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
-			      0 122 IRQ_TYPE_LEVEL_HIGH
-			      0 123 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi2: sd@e6870000 {
-		compatible = "renesas,sdhi-r8a7740";
-		reg = <0xe6870000 0x100>;
-		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
-			      0 126 IRQ_TYPE_LEVEL_HIGH
-			      0 127 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sh_fsi2: sound@fe1f0000 {
-		#sound-dai-cells = <1>;
-		compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
-		reg = <0xfe1f0000 0x400>;
-		interrupts = <0 9 0x4>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/r8a7778-bockw-reference.dts b/src/arm/r8a7778-bockw-reference.dts
deleted file mode 100644
index 3342c74c5de8..000000000000
--- a/src/arm/r8a7778-bockw-reference.dts
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Reference Device Tree Source for the Bock-W board
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "bockw";
-	compatible = "renesas,bockw-reference", "renesas,r8a7778";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x10000000>;
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	ethernet@18300000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18300000 0x1000>;
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-};
-
-&mmcif {
-	pinctrl-0 = <&mmc_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	broken-cd;
-	status = "okay";
-};
-
-&irqpin {
-	status = "okay";
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_a", "scif0_ctrl";
-		renesas,function = "scif0";
-	};
-
-	mmc_pins: mmc {
-		renesas,groups = "mmc_data8", "mmc_ctrl";
-		renesas,function = "mmc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0_a";
-		renesas,function = "hspi0";
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl008k";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "data(spi)";
-			reg = <0x00000000 0x00100000>;
-		};
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/src/arm/r8a7778-bockw.dts b/src/arm/r8a7778-bockw.dts
deleted file mode 100644
index 46a884d45175..000000000000
--- a/src/arm/r8a7778-bockw.dts
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Reference Device Tree Source for the Bock-W board
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-
-/ {
-	model = "bockw";
-	compatible = "renesas,bockw", "renesas,r8a7778";
-
-	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x10000000>;
-	};
-};
diff --git a/src/arm/r8a7778.dtsi b/src/arm/r8a7778.dtsi
deleted file mode 100644
index ecfdf4b01b5a..000000000000
--- a/src/arm/r8a7778.dtsi
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Device Tree Source for Renesas r8a7778
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7778";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-		};
-	};
-
-	aliases {
-		spi0 = &hspi0;
-		spi1 = &hspi1;
-		spi2 = &hspi2;
-	};
-
-	gic: interrupt-controller@fe438000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xfe438000 0x1000>,
-		      <0xfe430000 0x100>;
-	};
-
-	/* irqpin: IRQ0 - IRQ3 */
-	irqpin: irqpin@fe78001c {
-		compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		status = "disabled"; /* default off */
-		reg =	<0xfe78001c 4>,
-			<0xfe780010 4>,
-			<0xfe780024 4>,
-			<0xfe780044 4>,
-			<0xfe780064 4>;
-		interrupts =   <0 27 IRQ_TYPE_LEVEL_HIGH
-				0 28 IRQ_TYPE_LEVEL_HIGH
-				0 29 IRQ_TYPE_LEVEL_HIGH
-				0 30 IRQ_TYPE_LEVEL_HIGH>;
-		sense-bitfield-width = <2>;
-	};
-
-	gpio0: gpio@ffc40000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
-		reg = <0xffc40000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio1: gpio@ffc41000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
-		reg = <0xffc41000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio2: gpio@ffc42000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
-		reg = <0xffc42000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio3: gpio@ffc43000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
-		reg = <0xffc43000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio4: gpio@ffc44000 {
-		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
-		reg = <0xffc44000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 27>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	pfc: pfc@fffc0000 {
-		compatible = "renesas,pfc-r8a7778";
-		reg = <0xfffc0000 0x118>;
-	};
-
-	i2c0: i2c@ffc70000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc70000 0x1000>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@ffc71000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc71000 0x1000>;
-		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@ffc72000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc72000 0x1000>;
-		interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@ffc73000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7778";
-		reg = <0xffc73000 0x1000>;
-		interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif0: serial@ffe40000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe40000 0x100>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif1: serial@ffe41000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe41000 0x100>;
-		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif2: serial@ffe42000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe42000 0x100>;
-		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif3: serial@ffe43000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe43000 0x100>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif4: serial@ffe44000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe44000 0x100>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scif5: serial@ffe45000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
-		reg = <0xffe45000 0x100>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	mmcif: mmc@ffe4e000 {
-		compatible = "renesas,sh-mmcif";
-		reg = <0xffe4e000 0x100>;
-		interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	sdhi0: sd@ffe4c000 {
-		compatible = "renesas,sdhi-r8a7778";
-		reg = <0xffe4c000 0x100>;
-		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi1: sd@ffe4d000 {
-		compatible = "renesas,sdhi-r8a7778";
-		reg = <0xffe4d000 0x100>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ffe4f000 {
-		compatible = "renesas,sdhi-r8a7778";
-		reg = <0xffe4f000 0x100>;
-		interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc7000 0x18>;
-		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc8000 0x18>;
-		interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc6000 0x18>;
-		interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/r8a7779-marzen-reference.dts b/src/arm/r8a7779-marzen-reference.dts
deleted file mode 100644
index 76f5eef7d1cc..000000000000
--- a/src/arm/r8a7779-marzen-reference.dts
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Reference Device Tree Source for the Marzen board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7779.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "marzen";
-	compatible = "renesas,marzen-reference", "renesas,r8a7779";
-
-	chosen {
-		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	lan0@18000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18000000 0x100>;
-		pinctrl-0 = <&lan0_pins>;
-		pinctrl-names = "default";
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led2 {
-			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		};
-		led3 {
-			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		};
-		led4 {
-			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&irqpin0 {
-	status = "okay";
-};
-
-&pfc {
-	pinctrl-0 = <&scif2_pins &scif4_pins>;
-	pinctrl-names = "default";
-
-	lan0_pins: lan0 {
-		intc {
-			renesas,groups = "intc_irq1_b";
-			renesas,function = "intc";
-		};
-		lbsc {
-			renesas,groups = "lbsc_ex_cs0";
-			renesas,function = "lbsc";
-		};
-	};
-
-	scif2_pins: serial2 {
-		renesas,groups = "scif2_data_c";
-		renesas,function = "scif2";
-	};
-
-	scif4_pins: serial4 {
-		renesas,groups = "scif4_data";
-		renesas,function = "scif4";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0";
-		renesas,function = "hspi0";
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/src/arm/r8a7779-marzen.dts b/src/arm/r8a7779-marzen.dts
deleted file mode 100644
index 5745555df943..000000000000
--- a/src/arm/r8a7779-marzen.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Device Tree Source for the Marzen board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7779.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "marzen";
-	compatible = "renesas,marzen", "renesas,r8a7779";
-
-	aliases {
-		serial2 = &scif2;
-		serial4 = &scif4;
-	};
-
-	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	lan0@18000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18000000 0x100>;
-		pinctrl-0 = <&lan0_pins>;
-		pinctrl-names = "default";
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		smsc,irq-push-pull;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led2 {
-			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-		};
-		led3 {
-			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
-		};
-		led4 {
-			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&irqpin0 {
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <31250000>;
-};
-
-&pfc {
-	lan0_pins: lan0 {
-		intc {
-			renesas,groups = "intc_irq1_b";
-			renesas,function = "intc";
-		};
-		lbsc {
-			renesas,groups = "lbsc_ex_cs0";
-			renesas,function = "lbsc";
-		};
-	};
-
-	scif2_pins: serial2 {
-		renesas,groups = "scif2_data_c";
-		renesas,function = "scif2";
-	};
-
-	scif4_pins: serial4 {
-		renesas,groups = "scif4_data";
-		renesas,function = "scif4";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0";
-		renesas,function = "hspi0";
-	};
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif4 {
-	pinctrl-0 = <&scif4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
diff --git a/src/arm/r8a7779.dtsi b/src/arm/r8a7779.dtsi
deleted file mode 100644
index 58d0d952d60e..000000000000
--- a/src/arm/r8a7779.dtsi
+++ /dev/null
@@ -1,488 +0,0 @@
-/*
- * Device Tree Source for Renesas r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/r8a7779-clock.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7779";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			clock-frequency = <1000000000>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			clock-frequency = <1000000000>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			clock-frequency = <1000000000>;
-		};
-	};
-
-	aliases {
-		spi0 = &hspi0;
-		spi1 = &hspi1;
-		spi2 = &hspi2;
-	};
-
-	gic: interrupt-controller@f0001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xf0001000 0x1000>,
-		      <0xf0000100 0x100>;
-	};
-
-	gpio0: gpio@ffc40000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc40000 0x2c>;
-		interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio1: gpio@ffc41000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc41000 0x2c>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio2: gpio@ffc42000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc42000 0x2c>;
-		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio3: gpio@ffc43000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc43000 0x2c>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio4: gpio@ffc44000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc44000 0x2c>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio5: gpio@ffc45000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc45000 0x2c>;
-		interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 160 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	gpio6: gpio@ffc46000 {
-		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
-		reg = <0xffc46000 0x2c>;
-		interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 192 9>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	irqpin0: irqpin@fe780010 {
-		compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		status = "disabled";
-		interrupt-controller;
-		reg = <0xfe78001c 4>,
-			<0xfe780010 4>,
-			<0xfe780024 4>,
-			<0xfe780044 4>,
-			<0xfe780064 4>;
-		interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
-			      0 28 IRQ_TYPE_LEVEL_HIGH
-			      0 29 IRQ_TYPE_LEVEL_HIGH
-			      0 30 IRQ_TYPE_LEVEL_HIGH>;
-		sense-bitfield-width = <2>;
-	};
-
-	i2c0: i2c@ffc70000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779";
-		reg = <0xffc70000 0x1000>;
-		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@ffc71000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779";
-		reg = <0xffc71000 0x1000>;
-		interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@ffc72000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779";
-		reg = <0xffc72000 0x1000>;
-		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@ffc73000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7779";
-		reg = <0xffc73000 0x1000>;
-		interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
-		status = "disabled";
-	};
-
-	scif0: serial@ffe40000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe40000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif1: serial@ffe41000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe41000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif2: serial@ffe42000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe42000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif3: serial@ffe43000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe43000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif4: serial@ffe44000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe44000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif5: serial@ffe45000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
-		reg = <0xffe45000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg_clocks R8A7779_CLK_P>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	pfc: pfc@fffc0000 {
-		compatible = "renesas,pfc-r8a7779";
-		reg = <0xfffc0000 0x23c>;
-	};
-
-	thermal@ffc48000 {
-		compatible = "renesas,rcar-thermal";
-		reg = <0xffc48000 0x38>;
-	};
-
-	sata: sata@fc600000 {
-		compatible = "renesas,rcar-sata";
-		reg = <0xfc600000 0x2000>;
-		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
-	};
-
-	sdhi0: sd@ffe4c000 {
-		compatible = "renesas,sdhi-r8a7779";
-		reg = <0xffe4c000 0x100>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi1: sd@ffe4d000 {
-		compatible = "renesas,sdhi-r8a7779";
-		reg = <0xffe4d000 0x100>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ffe4e000 {
-		compatible = "renesas,sdhi-r8a7779";
-		reg = <0xffe4e000 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	sdhi3: sd@ffe4f000 {
-		compatible = "renesas,sdhi-r8a7779";
-		reg = <0xffe4f000 0x100>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
-		cap-sd-highspeed;
-		cap-sdio-irq;
-		status = "disabled";
-	};
-
-	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
-		reg = <0xfffc7000 0x18>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
-		status = "disabled";
-	};
-
-	hspi1: spi@fffc8000 {
-		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
-		reg = <0xfffc8000 0x18>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
-		status = "disabled";
-	};
-
-	hspi2: spi@fffc6000 {
-		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
-		reg = <0xfffc6000 0x18>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* External root clock */
-		extal_clk: extal_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overriden by the board. */
-			clock-frequency = <0>;
-			clock-output-names = "extal";
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: clocks@ffc80000 {
-			compatible = "renesas,r8a7779-cpg-clocks";
-			reg = <0xffc80000 0x30>;
-			clocks = <&extal_clk>;
-			#clock-cells = <1>;
-			clock-output-names = "plla", "z", "zs", "s",
-					     "s1", "p", "b", "out";
-		};
-
-		/* Fixed factor clocks */
-		i_clk: i_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "i";
-		};
-		s3_clk: s3_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "s3";
-		};
-		s4_clk: s4_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <16>;
-			clock-mult = <1>;
-			clock-output-names = "s4";
-		};
-		g_clk: g_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
-			#clock-cells = <0>;
-			clock-div = <24>;
-			clock-mult = <1>;
-			clock-output-names = "g";
-		};
-
-		/* Gate clocks */
-		mstp0_clks: clocks@ffc80030 {
-			compatible = "renesas,r8a7779-mstp-clocks",
-			             "renesas,cpg-mstp-clocks";
-			reg = <0xffc80030 4>;
-			clocks = <&cpg_clocks R8A7779_CLK_S>,
-			         <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_S1>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7779_CLK_HSPI R8A7779_CLK_TMU2
-				R8A7779_CLK_TMU1 R8A7779_CLK_TMU0
-				R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0
-				R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4
-				R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2
-				R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0
-				R8A7779_CLK_I2C3 R8A7779_CLK_I2C2
-				R8A7779_CLK_I2C1 R8A7779_CLK_I2C0
-			>;
-			clock-output-names =
-				"hspi", "tmu2", "tmu1", "tmu0", "hscif1",
-				"hscif0", "scif5", "scif4", "scif3", "scif2",
-				"scif1", "scif0", "i2c3", "i2c2", "i2c1",
-				"i2c0";
-		};
-		mstp1_clks: clocks@ffc80034 {
-			compatible = "renesas,r8a7779-mstp-clocks",
-			             "renesas,cpg-mstp-clocks";
-			reg = <0xffc80034 4>, <0xffc80044 4>;
-			clocks = <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_S>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_P>,
-				 <&cpg_clocks R8A7779_CLK_S>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7779_CLK_USB01 R8A7779_CLK_USB2
-				R8A7779_CLK_DU R8A7779_CLK_VIN2
-				R8A7779_CLK_VIN1 R8A7779_CLK_VIN0
-				R8A7779_CLK_ETHER R8A7779_CLK_SATA
-				R8A7779_CLK_PCIE R8A7779_CLK_VIN3
-			>;
-			clock-output-names =
-				"usb01", "usb2",
-				"du", "vin2",
-				"vin1", "vin0",
-				"ether", "sata",
-				"pcie", "vin3";
-		};
-		mstp3_clks: clocks@ffc8003c {
-			compatible = "renesas,r8a7779-mstp-clocks",
-			             "renesas,cpg-mstp-clocks";
-			reg = <0xffc8003c 4>;
-			clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
-				 <&s4_clk>, <&s4_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2
-				R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0
-				R8A7779_CLK_MMC1 R8A7779_CLK_MMC0
-			>;
-			clock-output-names =
-				"sdhi3", "sdhi2", "sdhi1", "sdhi0",
-				"mmc1", "mmc0";
-		};
-	};
-};
diff --git a/src/arm/r8a7790-lager.dts b/src/arm/r8a7790-lager.dts
deleted file mode 100644
index 856b4236b674..000000000000
--- a/src/arm/r8a7790-lager.dts
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * Device Tree Source for the Lager board
- *
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7790.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Lager";
-	compatible = "renesas,lager", "renesas,r8a7790";
-
-	aliases {
-		serial6 = &scif0;
-		serial7 = &scif1;
-	};
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@180000000 {
-		device_type = "memory";
-		reg = <1 0x40000000 0 0xc0000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button@1 {
-			linux,code = <KEY_1>;
-			label = "SW2-1";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			linux,code = <KEY_2>;
-			label = "SW2-2";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			linux,code = <KEY_3>;
-			label = "SW2-3";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
-		};
-		button@4 {
-			linux,code = <KEY_4>;
-			label = "SW2-4";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_sdhi0: regulator@1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator@2 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi2: regulator@3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi2: regulator@4 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-
-	du_pins: du {
-		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
-		renesas,function = "du";
-	};
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data";
-		renesas,function = "scif0";
-	};
-
-	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data";
-		renesas,function = "scif1";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	mmc1_pins: mmc1 {
-		renesas,groups = "mmc1_data8", "mmc1_ctrl";
-		renesas,function = "mmc1";
-	};
-
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
-	};
-
-	msiof1_pins: spi2 {
-		renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
-				 "msiof1_tx";
-		renesas,function = "msiof1";
-	};
-
-	iic1_pins: iic1 {
-		renesas,groups = "iic1";
-		renesas,function = "iic1";
-	};
-
-	iic2_pins: iic2 {
-		renesas,groups = "iic2";
-		renesas,function = "iic2";
-	};
-
-	iic3_pins: iic3 {
-		renesas,groups = "iic3";
-		renesas,function = "iic3";
-	};
-
-	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
-	};
-
-	usb2_pins: usb2 {
-		renesas,groups = "usb2";
-		renesas,function = "usb2";
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "ok";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&mmcif1 {
-	pinctrl-0 = <&mmc1_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&sata1 {
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl512s";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "loader";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "user";
-			reg = <0x00040000 0x00400000>;
-			read-only;
-		};
-		partition@440000 {
-			label = "flash";
-			reg = <0x00440000 0x03bc0000>;
-		};
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&msiof1 {
-	pinctrl-0 = <&msiof1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic: pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-};
-
-&iic0	{
-	status = "ok";
-};
-
-&iic1	{
-	status = "ok";
-	pinctrl-0 = <&iic1_pins>;
-	pinctrl-names = "default";
-};
-
-&iic2	{
-	status = "ok";
-	pinctrl-0 = <&iic2_pins>;
-	pinctrl-names = "default";
-};
-
-&iic3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&iic3_pins>;
-	status = "okay";
-
-	vdd_dvfs: regulator@68 {
-		compatible = "diasemi,da9210";
-		reg = <0x68>;
-
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&pci2 {
-	status = "okay";
-	pinctrl-0 = <&usb2_pins>;
-	pinctrl-names = "default";
-};
diff --git a/src/arm/r8a7790.dtsi b/src/arm/r8a7790.dtsi
deleted file mode 100644
index d9ddecbb859c..000000000000
--- a/src/arm/r8a7790.dtsi
+++ /dev/null
@@ -1,1080 +0,0 @@
-/*
- * Device Tree Source for the r8a7790 SoC
- *
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/clock/r8a7790-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7790";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &iic0;
-		i2c5 = &iic1;
-		i2c6 = &iic2;
-		i2c7 = &iic3;
-		spi0 = &qspi;
-		spi1 = &msiof0;
-		spi2 = &msiof1;
-		spi3 = &msiof2;
-		spi4 = &msiof3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1300000000>;
-			voltage-tolerance = <1>; /* 1% */
-			clocks = <&cpg_clocks R8A7790_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1400000 1000000>,
-					   <1225000 1000000>,
-					   <1050000 1000000>,
-					   < 875000 1000000>,
-					   < 700000 1000000>,
-					   < 350000 1000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1300000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-			clock-frequency = <1300000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-			clock-frequency = <1300000000>;
-		};
-
-		cpu4: cpu@4 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clock-frequency = <780000000>;
-		};
-
-		cpu5: cpu@5 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <780000000>;
-		};
-
-		cpu6: cpu@6 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <780000000>;
-		};
-
-		cpu7: cpu@7 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <780000000>;
-		};
-	};
-
-	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0xf1001000 0 0x1000>,
-			<0 0xf1002000 0 0x1000>,
-			<0 0xf1004000 0 0x2000>,
-			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	gpio0: gpio@e6050000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6050000 0 0x50>;
-		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
-	};
-
-	gpio1: gpio@e6051000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6051000 0 0x50>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
-	};
-
-	gpio2: gpio@e6052000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6052000 0 0x50>;
-		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
-	};
-
-	gpio3: gpio@e6053000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6053000 0 0x50>;
-		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
-	};
-
-	gpio4: gpio@e6054000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6054000 0 0x50>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
-	};
-
-	gpio5: gpio@e6055000 {
-		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
-		reg = <0 0xe6055000 0 0x50>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 160 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
-	};
-
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
-		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	irqc0: interrupt-controller@e61c0000 {
-		compatible = "renesas,irqc-r8a7790", "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	i2c0: i2c@e6508000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7790";
-		reg = <0 0xe6508000 0 0x40>;
-		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6518000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7790";
-		reg = <0 0xe6518000 0 0x40>;
-		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@e6530000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7790";
-		reg = <0 0xe6530000 0 0x40>;
-		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@e6540000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7790";
-		reg = <0 0xe6540000 0 0x40>;
-		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
-		status = "disabled";
-	};
-
-	iic0: i2c@e6500000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
-		reg = <0 0xe6500000 0 0x425>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
-		status = "disabled";
-	};
-
-	iic1: i2c@e6510000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
-		reg = <0 0xe6510000 0 0x425>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
-		status = "disabled";
-	};
-
-	iic2: i2c@e6520000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
-		reg = <0 0xe6520000 0 0x425>;
-		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
-		status = "disabled";
-	};
-
-	iic3: i2c@e60b0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
-		reg = <0 0xe60b0000 0 0x425>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
-		status = "disabled";
-	};
-
-	mmcif0: mmcif@ee200000 {
-		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
-		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	mmcif1: mmc@ee220000 {
-		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
-		reg = <0 0xee220000 0 0x80>;
-		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	pfc: pfc@e6060000 {
-		compatible = "renesas,pfc-r8a7790";
-		reg = <0 0xe6060000 0 0x250>;
-	};
-
-	sdhi0: sd@ee100000 {
-		compatible = "renesas,sdhi-r8a7790";
-		reg = <0 0xee100000 0 0x200>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi1: sd@ee120000 {
-		compatible = "renesas,sdhi-r8a7790";
-		reg = <0 0xee120000 0 0x200>;
-		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ee140000 {
-		compatible = "renesas,sdhi-r8a7790";
-		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi3: sd@ee160000 {
-		compatible = "renesas,sdhi-r8a7790";
-		reg = <0 0xee160000 0 0x100>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
-		reg = <0 0xe6c40000 0 64>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
-		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
-		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif";
-		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif";
-		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
-		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
-		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	ether: ethernet@ee700000 {
-		compatible = "renesas,ether-r8a7790";
-		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
-		phy-mode = "rmii";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	sata0: sata@ee300000 {
-		compatible = "renesas,sata-r8a7790";
-		reg = <0 0xee300000 0 0x2000>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
-		status = "disabled";
-	};
-
-	sata1: sata@ee500000 {
-		compatible = "renesas,sata-r8a7790";
-		reg = <0 0xee500000 0 0x2000>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/* External root clock */
-		extal_clk: extal_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overriden by the board. */
-			clock-frequency = <0>;
-			clock-output-names = "extal";
-		};
-
-		/* External PCIe clock - can be overridden by the board */
-		pcie_bus_clk: pcie_bus_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <100000000>;
-			clock-output-names = "pcie_bus";
-			status = "disabled";
-		};
-
-		/*
-		 * The external audio clocks are configured as 0 Hz fixed frequency clocks by
-		 * default. Boards that provide audio clocks should override them.
-		 */
-		audio_clk_a: audio_clk_a {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_a";
-		};
-		audio_clk_b: audio_clk_b {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_b";
-		};
-		audio_clk_c: audio_clk_c {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_c";
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: cpg_clocks@e6150000 {
-			compatible = "renesas,r8a7790-cpg-clocks",
-				     "renesas,rcar-gen2-cpg-clocks";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
-			#clock-cells = <1>;
-			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "sd1",
-					     "z";
-		};
-
-		/* Variable factor clocks */
-		sd2_clk: sd2_clk@e6150078 {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150078 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "sd2";
-		};
-		sd3_clk: sd3_clk@e615007c {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615007c 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "sd3";
-		};
-		mmc0_clk: mmc0_clk@e6150240 {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150240 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc0";
-		};
-		mmc1_clk: mmc1_clk@e6150244 {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150244 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc1";
-		};
-		ssp_clk: ssp_clk@e6150248 {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150248 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "ssp";
-		};
-		ssprs_clk: ssprs_clk@e615024c {
-			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615024c 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "ssprs";
-		};
-
-		/* Fixed factor clocks */
-		pll1_div2_clk: pll1_div2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "pll1_div2";
-		};
-		z2_clk: z2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "z2";
-		};
-		zg_clk: zg_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <3>;
-			clock-mult = <1>;
-			clock-output-names = "zg";
-		};
-		zx_clk: zx_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <3>;
-			clock-mult = <1>;
-			clock-output-names = "zx";
-		};
-		zs_clk: zs_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <6>;
-			clock-mult = <1>;
-			clock-output-names = "zs";
-		};
-		hp_clk: hp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <12>;
-			clock-mult = <1>;
-			clock-output-names = "hp";
-		};
-		i_clk: i_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "i";
-		};
-		b_clk: b_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <12>;
-			clock-mult = <1>;
-			clock-output-names = "b";
-		};
-		p_clk: p_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <24>;
-			clock-mult = <1>;
-			clock-output-names = "p";
-		};
-		cl_clk: cl_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <48>;
-			clock-mult = <1>;
-			clock-output-names = "cl";
-		};
-		m2_clk: m2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "m2";
-		};
-		imp_clk: imp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "imp";
-		};
-		rclk_clk: rclk_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <(48 * 1024)>;
-			clock-mult = <1>;
-			clock-output-names = "rclk";
-		};
-		oscclk_clk: oscclk_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <(12 * 1024)>;
-			clock-mult = <1>;
-			clock-output-names = "oscclk";
-		};
-		zb3_clk: zb3_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "zb3";
-		};
-		zb3d2_clk: zb3d2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "zb3d2";
-		};
-		ddr_clk: ddr_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "ddr";
-		};
-		mp_clk: mp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-div = <15>;
-			clock-mult = <1>;
-			clock-output-names = "mp";
-		};
-		cp_clk: cp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&extal_clk>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "cp";
-		};
-
-		/* Gate clocks */
-		mstp0_clks: mstp0_clks@e6150130 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
-			clocks = <&mp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7790_CLK_MSIOF0>;
-			clock-output-names = "msiof0";
-		};
-		mstp1_clks: mstp1_clks@e6150134 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
-			clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
-				 <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
-				 <&zs_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
-				R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
-				R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
-			>;
-			clock-output-names =
-				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
-				"vsp1-du0", "vsp1-rt", "vsp1-sy";
-		};
-		mstp2_clks: mstp2_clks@e6150138 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
-				 <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
-				R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1
-				R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
-			>;
-			clock-output-names =
-				"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
-				"scifb1", "msiof1", "msiof3", "scifb2";
-		};
-		mstp3_clks: mstp3_clks@e615013c {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
-				 <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
-				 <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
-				R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
-				R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
-			>;
-			clock-output-names =
-				"iic2", "tpu0", "mmcif1", "sdhi3",
-				"sdhi2", "sdhi1", "sdhi0", "mmcif0",
-				"iic0", "pciec", "iic1", "ssusb", "cmt1";
-		};
-		mstp5_clks: mstp5_clks@e6150144 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&extal_clk>, <&p_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7790_CLK_THERMAL R8A7790_CLK_PWM>;
-			clock-output-names = "thermal", "pwm";
-		};
-		mstp7_clks: mstp7_clks@e615014c {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
-				 <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>,
-				 <&zx_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1
-				R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0
-				R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0
-				R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0
-			>;
-			clock-output-names =
-				"ehci", "hsusb", "hscif1", "hscif0", "scif1",
-				"scif0", "du2", "du1", "du0", "lvds1", "lvds0";
-		};
-		mstp8_clks: mstp8_clks@e6150990 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>,
-				 <&zs_clk>, <&zs_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1
-				R8A7790_CLK_VIN0 R8A7790_CLK_ETHER R8A7790_CLK_SATA1
-				R8A7790_CLK_SATA0
-			>;
-			clock-output-names =
-				"vin3", "vin2", "vin1", "vin0", "ether", "sata1", "sata0";
-		};
-		mstp9_clks: mstp9_clks@e6150994 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>,
-				 <&cp_clk>, <&cp_clk>, <&cp_clk>,
-				 <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
-				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3
-				R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0
-				R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS
-				R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0
-			>;
-			clock-output-names =
-				"gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
-				"rcan1", "rcan0", "qspi_mod", "iic3",
-				"i2c3", "i2c2", "i2c1", "i2c0";
-		};
-		mstp10_clks: mstp10_clks@e6150998 {
-			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
-			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>;
-
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7790_CLK_SSI_ALL
-				R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5
-				R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0
-				R8A7790_CLK_SCU_ALL
-				R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0
-				R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5
-				R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0
-			>;
-			clock-output-names =
-				"ssi-all",
-				"ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
-				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
-				"scu-all",
-				"scu-dvc1", "scu-dvc0",
-				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
-				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
-		};
-	};
-
-	qspi: spi@e6b10000 {
-		compatible = "renesas,qspi-r8a7790", "renesas,qspi";
-		reg = <0 0xe6b10000 0 0x2c>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6e20000 0 0x0064>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof1: spi@e6e10000 {
-		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6e10000 0 0x0064>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof2: spi@e6e00000 {
-		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6e00000 0 0x0064>;
-		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof3: spi@e6c90000 {
-		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6c90000 0 0x0064>;
-		interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	pci0: pci@ee090000 {
-		compatible = "renesas,pci-r8a7790";
-		device_type = "pci";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
-		reg = <0 0xee090000 0 0xc00>,
-		      <0 0xee080000 0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pci1: pci@ee0b0000 {
-		compatible = "renesas,pci-r8a7790";
-		device_type = "pci";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
-		reg = <0 0xee0b0000 0 0xc00>,
-		      <0 0xee0a0000 0 0x1100>;
-		interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <1 1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pci2: pci@ee0d0000 {
-		compatible = "renesas,pci-r8a7790";
-		device_type = "pci";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
-		reg = <0 0xee0d0000 0 0xc00>,
-		      <0 0xee0c0000 0 0x1100>;
-		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <2 2>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pciec: pcie@fe000000 {
-		compatible = "renesas,pcie-r8a7790";
-		reg = <0 0xfe000000 0 0x80000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		bus-range = <0x00 0xff>;
-		device_type = "pci";
-		ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-			  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-			  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-			  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-		/* Map all possible DDR as inbound ranges */
-		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-			      0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
-		interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 118 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
-		clock-names = "pcie", "pcie_bus";
-		status = "disabled";
-	};
-
-	rcar_sound: rcar_sound@0xec500000 {
-		#sound-dai-cells = <1>;
-		compatible =  "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
-		interrupt-parent = <&gic>;
-		reg =	<0 0xec500000 0 0x1000>, /* SCU */
-			<0 0xec5a0000 0 0x100>,  /* ADG */
-			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x1280>; /* SSI */
-		clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
-			<&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
-			<&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
-			<&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
-			<&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
-			<&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
-			<&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
-			<&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
-			<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
-			<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
-			<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
-			<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
-			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
-		clock-names = "ssi-all",
-				"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
-				"src.9", "src.8", "src.7", "src.6", "src.5",
-				"src.4", "src.3", "src.2", "src.1", "src.0",
-				"dvc.0", "dvc.1",
-				"clk_a", "clk_b", "clk_c", "clk_i";
-
-		status = "disabled";
-
-		rcar_sound,dvc {
-			dvc0: dvc@0 { };
-			dvc1: dvc@1 { };
-		};
-
-		rcar_sound,src {
-			src0: src@0 { };
-			src1: src@1 { };
-			src2: src@2 { };
-			src3: src@3 { };
-			src4: src@4 { };
-			src5: src@5 { };
-			src6: src@6 { };
-			src7: src@7 { };
-			src8: src@8 { };
-			src9: src@9 { };
-		};
-
-		rcar_sound,ssi {
-			ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
-		};
-	};
-};
diff --git a/src/arm/r8a7791-henninger.dts b/src/arm/r8a7791-henninger.dts
deleted file mode 100644
index 3a2ef0a2a137..000000000000
--- a/src/arm/r8a7791-henninger.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Device Tree Source for the Henninger board
- *
- * Copyright (C) 2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Henninger";
-	compatible = "renesas,henninger", "renesas,r8a7791";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	vcc_sdhi0: regulator@0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi0: regulator@1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi2: regulator@2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi2: regulator@3 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	i2c2_pins: i2c2 {
-		renesas,groups = "i2c2";
-		renesas,function = "i2c2";
-	};
-
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
-	};
-
-	msiof0_pins: spi1 {
-		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
-				 "msiof0_tx";
-		renesas,function = "msiof0";
-	};
-
-	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "ok";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl512s";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "loader_prg";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "user_prg";
-			reg = <0x00040000 0x00400000>;
-			read-only;
-		};
-		partition@440000 {
-			label = "flash_fs";
-			reg = <0x00440000 0x03bc0000>;
-		};
-	};
-};
-
-&msiof0 {
-	pinctrl-0 = <&msiof0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&pcie_bus_clk {
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
diff --git a/src/arm/r8a7791-koelsch-reference.dts b/src/arm/r8a7791-koelsch-reference.dts
deleted file mode 100644
index 588ca17ea1f0..000000000000
--- a/src/arm/r8a7791-koelsch-reference.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Koelsch";
-	compatible = "renesas,koelsch-reference", "renesas,r8a7791";
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <30>;
-			label = "SW30";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <48>;
-			label = "SW31";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <46>;
-			label = "SW32";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <32>;
-			label = "SW33";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <18>;
-			label = "SW34";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <33>;
-			label = "SW35";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <34>;
-			label = "SW36";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pfc {
-	pinctrl-0 = <&scif0_pins &scif1_pins>;
-	pinctrl-names = "default";
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data_d";
-		renesas,function = "scif1";
-	};
-};
diff --git a/src/arm/r8a7791-koelsch.dts b/src/arm/r8a7791-koelsch.dts
deleted file mode 100644
index be59014474b2..000000000000
--- a/src/arm/r8a7791-koelsch.dts
+++ /dev/null
@@ -1,454 +0,0 @@
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Koelsch";
-	compatible = "renesas,koelsch", "renesas,r8a7791";
-
-	aliases {
-		serial6 = &scif0;
-		serial7 = &scif1;
-	};
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-1 {
-			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_1>;
-			label = "SW2-1";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-2 {
-			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_2>;
-			label = "SW2-2";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-3 {
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW2-3";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW2-4";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_A>;
-			label = "SW30";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_B>;
-			label = "SW31";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_C>;
-			label = "SW32";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_D>;
-			label = "SW33";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_E>;
-			label = "SW34";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_F>;
-			label = "SW35";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_G>;
-			label = "SW36";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	vcc_sdhi0: regulator@0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator@1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi1: regulator@2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi1: regulator@3 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi2: regulator@4 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi2: regulator@5 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-
-	i2c2_pins: i2c2 {
-		renesas,groups = "i2c2";
-		renesas,function = "i2c2";
-	};
-
-	du_pins: du {
-		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
-		renesas,function = "du";
-	};
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data_d";
-		renesas,function = "scif1";
-	};
-
-	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi1_pins: sd1 {
-		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
-		renesas,function = "sdhi1";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
-	};
-
-	msiof0_pins: spi1 {
-		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
-				 "msiof0_tx";
-		renesas,function = "msiof0";
-	};
-
-	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
-	};
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "ok";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl512s";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "loader";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-		partition@80000 {
-			label = "bootenv";
-			reg = <0x00080000 0x00080000>;
-			read-only;
-		};
-		partition@100000 {
-			label = "data";
-			reg = <0x00100000 0x03f00000>;
-		};
-	};
-};
-
-&msiof0 {
-	pinctrl-0 = <&msiof0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic: pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	eeprom@50 {
-		compatible = "renesas,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	vdd_dvfs: regulator@68 {
-		compatible = "diasemi,da9210";
-		reg = <0x68>;
-
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&pcie_bus_clk {
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_dvfs>;
-};
diff --git a/src/arm/r8a7791.dtsi b/src/arm/r8a7791.dtsi
deleted file mode 100644
index 0d82a4b3c650..000000000000
--- a/src/arm/r8a7791.dtsi
+++ /dev/null
@@ -1,1091 +0,0 @@
-/*
- * Device Tree Source for the r8a7791 SoC
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/clock/r8a7791-clock.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,r8a7791";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		spi0 = &qspi;
-		spi1 = &msiof0;
-		spi2 = &msiof1;
-		spi3 = &msiof2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			clock-frequency = <1500000000>;
-			voltage-tolerance = <1>; /* 1% */
-			clocks = <&cpg_clocks R8A7791_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
-
-			/* kHz - uV - OPPs unknown yet */
-			operating-points = <1500000 1000000>,
-					   <1312500 1000000>,
-					   <1125000 1000000>,
-					   < 937500 1000000>,
-					   < 750000 1000000>,
-					   < 375000 1000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			clock-frequency = <1500000000>;
-		};
-	};
-
-	gic: interrupt-controller@f1001000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0xf1001000 0 0x1000>,
-			<0 0xf1002000 0 0x1000>,
-			<0 0xf1004000 0 0x2000>,
-			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	gpio0: gpio@e6050000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6050000 0 0x50>;
-		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 0 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
-	};
-
-	gpio1: gpio@e6051000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6051000 0 0x50>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
-	};
-
-	gpio2: gpio@e6052000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6052000 0 0x50>;
-		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
-	};
-
-	gpio3: gpio@e6053000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6053000 0 0x50>;
-		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 96 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
-	};
-
-	gpio4: gpio@e6054000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6054000 0 0x50>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 128 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
-	};
-
-	gpio5: gpio@e6055000 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6055000 0 0x50>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 160 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
-	};
-
-	gpio6: gpio@e6055400 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6055400 0 0x50>;
-		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 192 32>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
-	};
-
-	gpio7: gpio@e6055800 {
-		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
-		reg = <0 0xe6055800 0 0x50>;
-		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		gpio-ranges = <&pfc 0 224 26>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
-	};
-
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
-		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
-	irqc0: interrupt-controller@e61c0000 {
-		compatible = "renesas,irqc-r8a7791", "renesas,irqc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* The memory map in the User's Manual maps the cores to bus numbers */
-	i2c0: i2c@e6508000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6508000 0 0x40>;
-		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6518000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6518000 0 0x40>;
-		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@e6530000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6530000 0 0x40>;
-		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@e6540000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6540000 0 0x40>;
-		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@e6520000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6520000 0 0x40>;
-		interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
-		status = "disabled";
-	};
-
-	i2c5: i2c@e6528000 {
-		/* doesn't need pinmux */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,i2c-r8a7791";
-		reg = <0 0xe6528000 0 0x40>;
-		interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
-		status = "disabled";
-	};
-
-	i2c6: i2c@e60b0000 {
-		/* doesn't need pinmux */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
-		reg = <0 0xe60b0000 0 0x425>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
-		status = "disabled";
-	};
-
-	i2c7: i2c@e6500000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
-		reg = <0 0xe6500000 0 0x425>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
-		status = "disabled";
-	};
-
-	i2c8: i2c@e6510000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
-		reg = <0 0xe6510000 0 0x425>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
-		status = "disabled";
-	};
-
-	pfc: pfc@e6060000 {
-		compatible = "renesas,pfc-r8a7791";
-		reg = <0 0xe6060000 0 0x250>;
-		#gpio-range-cells = <3>;
-	};
-
-	sdhi0: sd@ee100000 {
-		compatible = "renesas,sdhi-r8a7791";
-		reg = <0 0xee100000 0 0x200>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
-		status = "disabled";
-	};
-
-	sdhi1: sd@ee140000 {
-		compatible = "renesas,sdhi-r8a7791";
-		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ee160000 {
-		compatible = "renesas,sdhi-r8a7791";
-		reg = <0 0xee160000 0 0x100>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c40000 0 64>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c70000 0 64>;
-		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa4: serial@e6c78000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c78000 0 64>;
-		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifa5: serial@e6c80000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
-		reg = <0 0xe6c80000 0 64>;
-		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
-		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
-		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
-		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif2: serial@e6e58000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6e58000 0 64>;
-		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif3: serial@e6ea8000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6ea8000 0 64>;
-		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif4: serial@e6ee0000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6ee0000 0 64>;
-		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	scif5: serial@e6ee8000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
-		reg = <0 0xe6ee8000 0 64>;
-		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
-		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
-		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	hscif2: serial@e62d0000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
-		reg = <0 0xe62d0000 0 96>;
-		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
-		clock-names = "sci_ick";
-		status = "disabled";
-	};
-
-	ether: ethernet@ee700000 {
-		compatible = "renesas,ether-r8a7791";
-		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
-		phy-mode = "rmii";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	sata0: sata@ee300000 {
-		compatible = "renesas,sata-r8a7791";
-		reg = <0 0xee300000 0 0x2000>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
-		status = "disabled";
-	};
-
-	sata1: sata@ee500000 {
-		compatible = "renesas,sata-r8a7791";
-		reg = <0 0xee500000 0 0x2000>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/* External root clock */
-		extal_clk: extal_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			/* This value must be overriden by the board. */
-			clock-frequency = <0>;
-			clock-output-names = "extal";
-		};
-
-		/*
-		 * The external audio clocks are configured as 0 Hz fixed frequency clocks by
-		 * default. Boards that provide audio clocks should override them.
-		 */
-		audio_clk_a: audio_clk_a {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_a";
-		};
-		audio_clk_b: audio_clk_b {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_b";
-		};
-		audio_clk_c: audio_clk_c {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-			clock-output-names = "audio_clk_c";
-		};
-
-		/* External PCIe clock - can be overridden by the board */
-		pcie_bus_clk: pcie_bus_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <100000000>;
-			clock-output-names = "pcie_bus";
-			status = "disabled";
-		};
-
-		/* Special CPG clocks */
-		cpg_clocks: cpg_clocks@e6150000 {
-			compatible = "renesas,r8a7791-cpg-clocks",
-				     "renesas,rcar-gen2-cpg-clocks";
-			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
-			#clock-cells = <1>;
-			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z";
-		};
-
-		/* Variable factor clocks */
-		sd1_clk: sd2_clk@e6150078 {
-			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150078 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "sd1";
-		};
-		sd2_clk: sd3_clk@e615026c {
-			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615026c 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "sd2";
-		};
-		mmc0_clk: mmc0_clk@e6150240 {
-			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150240 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc0";
-		};
-		ssp_clk: ssp_clk@e6150248 {
-			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe6150248 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "ssp";
-		};
-		ssprs_clk: ssprs_clk@e615024c {
-			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615024c 0 4>;
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-output-names = "ssprs";
-		};
-
-		/* Fixed factor clocks */
-		pll1_div2_clk: pll1_div2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "pll1_div2";
-		};
-		zg_clk: zg_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <3>;
-			clock-mult = <1>;
-			clock-output-names = "zg";
-		};
-		zx_clk: zx_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <3>;
-			clock-mult = <1>;
-			clock-output-names = "zx";
-		};
-		zs_clk: zs_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <6>;
-			clock-mult = <1>;
-			clock-output-names = "zs";
-		};
-		hp_clk: hp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <12>;
-			clock-mult = <1>;
-			clock-output-names = "hp";
-		};
-		i_clk: i_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "i";
-		};
-		b_clk: b_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <12>;
-			clock-mult = <1>;
-			clock-output-names = "b";
-		};
-		p_clk: p_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <24>;
-			clock-mult = <1>;
-			clock-output-names = "p";
-		};
-		cl_clk: cl_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <48>;
-			clock-mult = <1>;
-			clock-output-names = "cl";
-		};
-		m2_clk: m2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "m2";
-		};
-		imp_clk: imp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "imp";
-		};
-		rclk_clk: rclk_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <(48 * 1024)>;
-			clock-mult = <1>;
-			clock-output-names = "rclk";
-		};
-		oscclk_clk: oscclk_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <(12 * 1024)>;
-			clock-mult = <1>;
-			clock-output-names = "oscclk";
-		};
-		zb3_clk: zb3_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "zb3";
-		};
-		zb3d2_clk: zb3d2_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "zb3d2";
-		};
-		ddr_clk: ddr_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
-			#clock-cells = <0>;
-			clock-div = <8>;
-			clock-mult = <1>;
-			clock-output-names = "ddr";
-		};
-		mp_clk: mp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&pll1_div2_clk>;
-			#clock-cells = <0>;
-			clock-div = <15>;
-			clock-mult = <1>;
-			clock-output-names = "mp";
-		};
-		cp_clk: cp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&extal_clk>;
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clock-output-names = "cp";
-		};
-
-		/* Gate clocks */
-		mstp0_clks: mstp0_clks@e6150130 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
-			clocks = <&mp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7791_CLK_MSIOF0>;
-			clock-output-names = "msiof0";
-		};
-		mstp1_clks: mstp1_clks@e6150134 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
-			clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
-				 <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
-				R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
-				R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
-			>;
-			clock-output-names =
-				"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
-				"vsp1-du0", "vsp1-sy";
-		};
-		mstp2_clks: mstp2_clks@e6150138 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
-				 <&mp_clk>, <&mp_clk>, <&mp_clk>,
-				 <&zs_clk>, <&zs_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0
-				R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1
-				R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2
-				R8A7791_CLK_SYS_DMAC1 R8A7791_CLK_SYS_DMAC0
-			>;
-			clock-output-names =
-				"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
-				"scifb1", "msiof1", "scifb2",
-				"sys-dmac1", "sys-dmac0";
-		};
-		mstp3_clks: mstp3_clks@e615013c {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
-				 <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
-				R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1
-				R8A7791_CLK_SSUSB R8A7791_CLK_CMT1
-			>;
-			clock-output-names =
-				"tpu0", "sdhi2", "sdhi1", "sdhi0",
-				"mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1";
-		};
-		mstp5_clks: mstp5_clks@e6150144 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&extal_clk>, <&p_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
-			clock-output-names = "thermal", "pwm";
-		};
-		mstp7_clks: mstp7_clks@e615014c {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
-			clocks = <&mp_clk>,  <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
-				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				 <&zx_clk>, <&zx_clk>, <&zx_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
-				R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
-				R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
-				R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0
-				R8A7791_CLK_LVDS0
-			>;
-			clock-output-names =
-				"ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
-				"scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0";
-		};
-		mstp8_clks: mstp8_clks@e6150990 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>,
-				 <&zs_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
-				R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
-			>;
-			clock-output-names =
-				"vin2", "vin1", "vin0", "ether", "sata1", "sata0";
-		};
-		mstp9_clks: mstp9_clks@e6150994 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
-				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
-				 <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
-				 <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
-				 <&hp_clk>, <&hp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4
-				R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0
-				R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
-				R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2
-				R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
-			>;
-			clock-output-names =
-				"gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
-				"rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2",
-				"i2c1", "i2c0";
-		};
-		mstp10_clks: mstp10_clks@e6150998 {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
-			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>;
-
-			#clock-cells = <1>;
-			clock-indices = <
-				R8A7791_CLK_SSI_ALL
-				R8A7791_CLK_SSI9 R8A7791_CLK_SSI8 R8A7791_CLK_SSI7 R8A7791_CLK_SSI6 R8A7791_CLK_SSI5
-				R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0
-				R8A7791_CLK_SCU_ALL
-				R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0
-				R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5
-				R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0
-			>;
-			clock-output-names =
-				"ssi-all",
-				"ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
-				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
-				"scu-all",
-				"scu-dvc1", "scu-dvc0",
-				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
-				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
-		};
-		mstp11_clks: mstp11_clks@e615099c {
-			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-			reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
-			#clock-cells = <1>;
-			renesas,clock-indices = <
-				R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5
-			>;
-			clock-output-names = "scifa3", "scifa4", "scifa5";
-		};
-	};
-
-	qspi: spi@e6b10000 {
-		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
-		reg = <0 0xe6b10000 0 0x2c>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
-		num-cs = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e20000 0 0x0064>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof1: spi@e6e10000 {
-		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e10000 0 0x0064>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	msiof2: spi@e6e00000 {
-		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e00000 0 0x0064>;
-		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	pci0: pci@ee090000 {
-		compatible = "renesas,pci-r8a7791";
-		device_type = "pci";
-		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
-		reg = <0 0xee090000 0 0xc00>,
-		      <0 0xee080000 0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pci1: pci@ee0d0000 {
-		compatible = "renesas,pci-r8a7791";
-		device_type = "pci";
-		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
-		reg = <0 0xee0d0000 0 0xc00>,
-		      <0 0xee0c0000 0 0x1100>;
-		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <1 1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pciec: pcie@fe000000 {
-		compatible = "renesas,pcie-r8a7791";
-		reg = <0 0xfe000000 0 0x80000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		bus-range = <0x00 0xff>;
-		device_type = "pci";
-		ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
-			  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
-			  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
-			  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
-		/* Map all possible DDR as inbound ranges */
-		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
-			      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
-		interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 118 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
-		clock-names = "pcie", "pcie_bus";
-		status = "disabled";
-	};
-
-	rcar_sound: rcar_sound@0xec500000 {
-		#sound-dai-cells = <1>;
-		compatible =  "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
-		interrupt-parent = <&gic>;
-		reg =	<0 0xec500000 0 0x1000>, /* SCU */
-			<0 0xec5a0000 0 0x100>,  /* ADG */
-			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x1280>; /* SSI */
-		clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>,
-			<&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>,
-			<&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>,
-			<&mstp10_clks R8A7791_CLK_SSI5>, <&mstp10_clks R8A7791_CLK_SSI4>,
-			<&mstp10_clks R8A7791_CLK_SSI3>, <&mstp10_clks R8A7791_CLK_SSI2>,
-			<&mstp10_clks R8A7791_CLK_SSI1>, <&mstp10_clks R8A7791_CLK_SSI0>,
-			<&mstp10_clks R8A7791_CLK_SCU_SRC9>, <&mstp10_clks R8A7791_CLK_SCU_SRC8>,
-			<&mstp10_clks R8A7791_CLK_SCU_SRC7>, <&mstp10_clks R8A7791_CLK_SCU_SRC6>,
-			<&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>,
-			<&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>,
-			<&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>,
-			<&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>,
-			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
-		clock-names = "ssi-all",
-				"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
-				"src.9", "src.8", "src.7", "src.6", "src.5",
-				"src.4", "src.3", "src.2", "src.1", "src.0",
-				"dvc.0", "dvc.1",
-				"clk_a", "clk_b", "clk_c", "clk_i";
-
-		status = "disabled";
-
-		rcar_sound,dvc {
-			dvc0: dvc@0 { };
-			dvc1: dvc@1 { };
-		};
-
-		rcar_sound,src {
-			src0: src@0 { };
-			src1: src@1 { };
-			src2: src@2 { };
-			src3: src@3 { };
-			src4: src@4 { };
-			src5: src@5 { };
-			src6: src@6 { };
-			src7: src@7 { };
-			src8: src@8 { };
-			src9: src@9 { };
-		};
-
-		rcar_sound,ssi {
-			ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
-		};
-	};
-};
diff --git a/src/arm/rk3066a-bqcurie2.dts b/src/arm/rk3066a-bqcurie2.dts
deleted file mode 100644
index c9d912da6141..000000000000
--- a/src/arm/rk3066a-bqcurie2.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "rk3066a.dtsi"
-
-/ {
-	model = "bq Curie 2";
-	compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
-
-	memory {
-		reg = <0x60000000 0x40000000>;
-	};
-
-	vcc_sd0: fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "sdmmc-supply";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		button@0 {
-			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
-			linux,code = <116>;
-			label = "GPIO Key Power";
-			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
-			debounce-interval = <100>;
-		};
-		button@1 {
-			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
-			linux,code = <104>;
-			label = "GPIO Key Vol-";
-			linux,input-type = <1>;
-			gpio-key,wakeup = <0>;
-			debounce-interval = <100>;
-		};
-		/* VOL+ comes somehow thru the ADC */
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
-
-		vcc5-supply = <&vcc_io>;
-		vcc6-supply = <&vcc_io>;
-
-		regulators {
-			vcc_rtc: regulator@0 {
-				regulator-name = "vcc_rtc";
-				regulator-always-on;
-			};
-
-			vcc_io: regulator@1 {
-				regulator-name = "vcc_io";
-				regulator-always-on;
-			};
-
-			vdd_arm: regulator@2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vcc_ddr: regulator@3 {
-				regulator-name = "vcc_ddr";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vcc18_cif: regulator@5 {
-				regulator-name = "vcc18_cif";
-				regulator-always-on;
-			};
-
-			vdd_11: regulator@6 {
-				regulator-name = "vdd_11";
-				regulator-always-on;
-			};
-
-			vcc_25: regulator@7 {
-				regulator-name = "vcc_25";
-				regulator-always-on;
-			};
-
-			vcc_18: regulator@8 {
-				regulator-name = "vcc_18";
-				regulator-always-on;
-			};
-
-			vcc25_hdmi: regulator@9 {
-				regulator-name = "vcc25_hdmi";
-				regulator-always-on;
-			};
-
-			vcca_33: regulator@10 {
-				regulator-name = "vcca_33";
-				regulator-always-on;
-			};
-
-			vcc_tp: regulator@11 {
-				regulator-name = "vcc_tp";
-				regulator-always-on;
-			};
-
-			vcc28_cif: regulator@12 {
-				regulator-name = "vcc28_cif";
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-/* must be included after &tps gets defined */
-#include "tps65910.dtsi"
-
-&mmc0 { /* sdmmc */
-	num-slots = <1>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
-	vmmc-supply = <&vcc_sd0>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
-};
-
-&mmc1 { /* wifi */
-	num-slots = <1>;
-	status = "okay";
-	non-removable;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
diff --git a/src/arm/rk3066a-clocks.dtsi b/src/arm/rk3066a-clocks.dtsi
deleted file mode 100644
index 6e307fc4c451..000000000000
--- a/src/arm/rk3066a-clocks.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/ {
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			#clock-cells = <0>;
-		};
-
-		xin24m: xin24m {
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-			#clock-cells = <0>;
-		};
-
-		dummy48m: dummy48m {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
-			#clock-cells = <0>;
-		};
-
-		dummy150m: dummy150m {
-			compatible = "fixed-clock";
-			clock-frequency = <150000000>;
-			#clock-cells = <0>;
-		};
-
-		clk_gates0: gate-clk@200000d0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d0 0x4>;
-			clocks = <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_core_periph", "gate_cpu_gpll",
-				"gate_ddrphy", "gate_aclk_cpu",
-				"gate_hclk_cpu", "gate_pclk_cpu",
-				"gate_atclk_cpu", "gate_i2s0",
-				"gate_i2s0_frac", "gate_i2s1",
-				"gate_i2s1_frac", "gate_i2s2",
-				"gate_i2s2_frac", "gate_spdif",
-				"gate_spdif_frac", "gate_testclk";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates1: gate-clk@200000d4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d4 0x4>;
-			clocks = <&xin24m>, <&xin24m>,
-				 <&xin24m>, <&dummy>,
-				 <&dummy>, <&xin24m>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>;
-
-			clock-output-names =
-				"gate_timer0", "gate_timer1",
-				"gate_timer2", "gate_jtag",
-				"gate_aclk_lcdc1_src", "gate_otgphy0",
-				"gate_otgphy1", "gate_ddr_gpll",
-				"gate_uart0", "gate_frac_uart0",
-				"gate_uart1", "gate_frac_uart1",
-				"gate_uart2", "gate_frac_uart2",
-				"gate_uart3", "gate_frac_uart3";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates2: gate-clk@200000d8 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d8 0x4>;
-			clocks = <&clk_gates2 1>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&clk_gates2 3>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy48m>,
-				 <&dummy>, <&dummy48m>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_periph_src", "gate_aclk_periph",
-				"gate_hclk_periph", "gate_pclk_periph",
-				"gate_smc", "gate_mac",
-				"gate_hsadc", "gate_hsadc_frac",
-				"gate_saradc", "gate_spi0",
-				"gate_spi1", "gate_mmc0",
-				"gate_mac_lbtest", "gate_mmc1",
-				"gate_emmc", "gate_tsadc";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates3: gate-clk@200000dc {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000dc 0x4>;
-			clocks = <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
-				"gate_dclk_lcdc1", "gate_pclkin_cif0",
-				"gate_pclkin_cif1", "reserved",
-				"reserved", "gate_cif0_out",
-				"gate_cif1_out", "gate_aclk_vepu",
-				"gate_hclk_vepu", "gate_aclk_vdpu",
-				"gate_hclk_vdpu", "gate_gpu_src",
-				"reserved", "gate_xin27m";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates4: gate-clk@200000e0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e0 0x4>;
-			clocks = <&clk_gates2 2>, <&clk_gates2 3>,
-				 <&clk_gates2 1>, <&clk_gates2 1>,
-				 <&clk_gates2 1>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates2 2>,
-				 <&clk_gates0 4>, <&clk_gates0 4>,
-				 <&clk_gates0 3>, <&clk_gates0 3>,
-				 <&clk_gates0 3>, <&clk_gates2 3>,
-				 <&clk_gates0 4>;
-
-			clock-output-names =
-				"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
-				"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
-				"gate_aclk_pei_niu", "gate_hclk_usb_peri",
-				"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
-				"gate_hclk_cpubus", "gate_hclk_ahb2apb",
-				"gate_aclk_strc_sys", "gate_aclk_l2mem_con",
-				"gate_aclk_intmem", "gate_pclk_tsadc",
-				"gate_hclk_hdmi";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates5: gate-clk@200000e4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e4 0x4>;
-			clocks = <&clk_gates0 3>, <&clk_gates2 1>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates0 4>, <&clk_gates0 5>,
-				 <&clk_gates2 1>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates4 5>,
-				 <&clk_gates4 5>, <&dummy>;
-
-			clock-output-names =
-				"gate_aclk_dmac1", "gate_aclk_dmac2",
-				"gate_pclk_efuse", "gate_pclk_tzpc",
-				"gate_pclk_grf", "gate_pclk_pmu",
-				"gate_hclk_rom", "gate_pclk_ddrupctl",
-				"gate_aclk_smc", "gate_hclk_nandc",
-				"gate_hclk_mmc0", "gate_hclk_mmc1",
-				"gate_hclk_emmc", "gate_hclk_otg0",
-				"gate_hclk_otg1", "gate_aclk_gpu";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates6: gate-clk@200000e8 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e8 0x4>;
-			clocks = <&clk_gates3 0>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates1 4>,
-				 <&clk_gates0 4>, <&clk_gates3 0>,
-				 <&clk_gates0 4>, <&clk_gates1 4>,
-				 <&clk_gates3 0>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates1 4>,
-				 <&clk_gates0 4>, <&clk_gates3 0>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_aclk_lcdc0", "gate_hclk_lcdc0",
-				"gate_hclk_lcdc1", "gate_aclk_lcdc1",
-				"gate_hclk_cif0", "gate_aclk_cif0",
-				"gate_hclk_cif1", "gate_aclk_cif1",
-				"gate_aclk_ipp", "gate_hclk_ipp",
-				"gate_hclk_rga", "gate_aclk_rga",
-				"gate_hclk_vio_bus", "gate_aclk_vio0",
-				"gate_aclk_vcodec", "gate_shclk_vio_h2h";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates7: gate-clk@200000ec {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000ec 0x4>;
-			clocks = <&clk_gates2 2>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates2 3>;
-
-			clock-output-names =
-				"gate_hclk_emac", "gate_hclk_spdif",
-				"gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch",
-				"gate_hclk_i2s_8ch", "gate_hclk_hsadc",
-				"gate_hclk_pidf", "gate_pclk_timer0",
-				"gate_pclk_timer1", "gate_pclk_timer2",
-				"gate_pclk_pwm01", "gate_pclk_pwm23",
-				"gate_pclk_spi0", "gate_pclk_spi1",
-				"gate_pclk_saradc", "gate_pclk_wdt";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates8: gate-clk@200000f0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000f0 0x4>;
-			clocks = <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&dummy>, <&clk_gates0 5>;
-
-			clock-output-names =
-				"gate_pclk_uart0", "gate_pclk_uart1",
-				"gate_pclk_uart2", "gate_pclk_uart3",
-				"gate_pclk_i2c0", "gate_pclk_i2c1",
-				"gate_pclk_i2c2", "gate_pclk_i2c3",
-				"gate_pclk_i2c4", "gate_pclk_gpio0",
-				"gate_pclk_gpio1", "gate_pclk_gpio2",
-				"gate_pclk_gpio3", "gate_pclk_gpio4",
-				"reserved", "gate_pclk_gpio6";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates9: gate-clk@200000f4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000f4 0x4>;
-			clocks = <&dummy>, <&clk_gates0 5>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&clk_gates1 4>,
-				 <&clk_gates0 5>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>;
-
-			clock-output-names =
-				"gate_clk_core_dbg", "gate_pclk_dbg",
-				"gate_clk_trace", "gate_atclk",
-				"gate_clk_l2c", "gate_aclk_vio1",
-				"gate_pclk_publ", "gate_aclk_intmem0",
-				"gate_aclk_intmem1", "gate_aclk_intmem2",
-				"gate_aclk_intmem3";
-
-			#clock-cells = <1>;
-		};
-	};
-
-};
diff --git a/src/arm/rk3066a.dtsi b/src/arm/rk3066a.dtsi
deleted file mode 100644
index 879a818fba51..000000000000
--- a/src/arm/rk3066a.dtsi
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/clock/rk3066a-cru.h>
-#include "rk3xxx.dtsi"
-
-/ {
-	compatible = "rockchip,rk3066a";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "rockchip,rk3066-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x1>;
-		};
-	};
-
-	sram: sram@10080000 {
-		compatible = "mmio-sram";
-		reg = <0x10080000 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x10080000 0x10000>;
-
-		smp-sram@0 {
-			compatible = "rockchip,rk3066-smp-sram";
-			reg = <0x0 0x50>;
-		};
-	};
-
-	cru: clock-controller@20000000 {
-		compatible = "rockchip,rk3066a-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	timer@2000e000 {
-		compatible = "snps,dw-apb-timer-osc";
-		reg = <0x2000e000 0x100>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
-		clock-names = "timer", "pclk";
-	};
-
-	timer@20038000 {
-		compatible = "snps,dw-apb-timer-osc";
-		reg = <0x20038000 0x100>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
-		clock-names = "timer", "pclk";
-	};
-
-	timer@2003a000 {
-		compatible = "snps,dw-apb-timer-osc";
-		reg = <0x2003a000 0x100>;
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
-		clock-names = "timer", "pclk";
-	};
-
-	pinctrl: pinctrl {
-		compatible = "rockchip,rk3066a-pinctrl";
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio0: gpio0@20034000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x20034000 0x100>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO0>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio1@2003c000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2003c000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO1>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio2@2003e000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2003e000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO2>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio3@20080000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x20080000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO3>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio4@20084000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x20084000 0x100>;
-			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO4>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio6@2000a000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2000a000 0x100>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO6>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pcfg_pull_default: pcfg_pull_default {
-			bias-pull-pin-default;
-		};
-
-		pcfg_pull_none: pcfg_pull_none {
-			bias-disable;
-		};
-
-		i2c0 {
-			i2c0_xfer: i2c0-xfer {
-				rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c1 {
-			i2c1_xfer: i2c1-xfer {
-				rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c2 {
-			i2c2_xfer: i2c2-xfer {
-				rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c3 {
-			i2c3_xfer: i2c3-xfer {
-				rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>,
-						<RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>;
-			};
-		};
-
-		i2c4 {
-			i2c4_xfer: i2c4-xfer {
-				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm0 {
-			pwm0_out: pwm0-out {
-				rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm1 {
-			pwm1_out: pwm1-out {
-				rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm2 {
-			pwm2_out: pwm2-out {
-				rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm3 {
-			pwm3_out: pwm3-out {
-				rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart0 {
-			uart0_xfer: uart0-xfer {
-				rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart0_cts: uart0-cts {
-				rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart0_rts: uart0-rts {
-				rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
-			};
-		};
-
-		uart1 {
-			uart1_xfer: uart1-xfer {
-				rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart1_cts: uart1-cts {
-				rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart1_rts: uart1-rts {
-				rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
-			};
-		};
-
-		uart2 {
-			uart2_xfer: uart2-xfer {
-				rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
-			};
-			/* no rts / cts for uart2 */
-		};
-
-		uart3 {
-			uart3_xfer: uart3-xfer {
-				rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart3_cts: uart3-cts {
-				rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			uart3_rts: uart3-rts {
-				rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
-			};
-		};
-
-		sd0 {
-			sd0_clk: sd0-clk {
-				rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd0_cmd: sd0-cmd {
-				rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd0_cd: sd0-cd {
-				rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd0_wp: sd0-wp {
-				rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd0_bus1: sd0-bus-width1 {
-				rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd0_bus4: sd0-bus-width4 {
-				rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
-			};
-		};
-
-		sd1 {
-			sd1_clk: sd1-clk {
-				rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd1_cmd: sd1-cmd {
-				rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd1_cd: sd1-cd {
-				rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd1_wp: sd1-wp {
-				rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd1_bus1: sd1-bus-width1 {
-				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
-			};
-
-			sd1_bus4: sd1-bus-width4 {
-				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
-						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
-			};
-		};
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_xfer>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_xfer>;
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_xfer>;
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_xfer>;
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_xfer>;
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_out>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm1_out>;
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm2_out>;
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_out>;
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_xfer>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_xfer>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_xfer>;
-};
-
-&wdt {
-	compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
-};
diff --git a/src/arm/rk3188-clocks.dtsi b/src/arm/rk3188-clocks.dtsi
deleted file mode 100644
index b1b92dc245ce..000000000000
--- a/src/arm/rk3188-clocks.dtsi
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/ {
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			#clock-cells = <0>;
-		};
-
-		xin24m: xin24m {
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-			#clock-cells = <0>;
-		};
-
-		dummy48m: dummy48m {
-			compatible = "fixed-clock";
-			clock-frequency = <48000000>;
-			#clock-cells = <0>;
-		};
-
-		dummy150m: dummy150m {
-			compatible = "fixed-clock";
-			clock-frequency = <150000000>;
-			#clock-cells = <0>;
-		};
-
-		clk_gates0: gate-clk@200000d0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d0 0x4>;
-			clocks = <&dummy150m>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_core_periph", "gate_cpu_gpll",
-				"gate_ddrphy", "gate_aclk_cpu",
-				"gate_hclk_cpu", "gate_pclk_cpu",
-				"gate_atclk_cpu", "gate_aclk_core",
-				"reserved", "gate_i2s0",
-				"gate_i2s0_frac", "reserved",
-				"reserved", "gate_spdif",
-				"gate_spdif_frac", "gate_testclk";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates1: gate-clk@200000d4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d4 0x4>;
-			clocks = <&xin24m>, <&xin24m>,
-				 <&xin24m>, <&dummy>,
-				 <&dummy>, <&xin24m>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&xin24m>, <&dummy>;
-
-			clock-output-names =
-				"gate_timer0", "gate_timer1",
-				"gate_timer3", "gate_jtag",
-				"gate_aclk_lcdc1_src", "gate_otgphy0",
-				"gate_otgphy1", "gate_ddr_gpll",
-				"gate_uart0", "gate_frac_uart0",
-				"gate_uart1", "gate_frac_uart1",
-				"gate_uart2", "gate_frac_uart2",
-				"gate_uart3", "gate_frac_uart3";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates2: gate-clk@200000d8 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000d8 0x4>;
-			clocks = <&clk_gates2 1>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&clk_gates2 3>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy48m>,
-				 <&dummy>, <&dummy48m>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_periph_src", "gate_aclk_periph",
-				"gate_hclk_periph", "gate_pclk_periph",
-				"gate_smc", "gate_mac",
-				"gate_hsadc", "gate_hsadc_frac",
-				"gate_saradc", "gate_spi0",
-				"gate_spi1", "gate_mmc0",
-				"gate_mac_lbtest", "gate_mmc1",
-				"gate_emmc", "reserved";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates3: gate-clk@200000dc {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000dc 0x4>;
-			clocks = <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&xin24m>, <&xin24m>,
-				 <&dummy>, <&dummy>,
-				 <&xin24m>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&xin24m>, <&dummy>;
-
-			clock-output-names =
-				"gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
-				"gate_dclk_lcdc1", "gate_pclkin_cif0",
-				"gate_timer2", "gate_timer4",
-				"gate_hsicphy", "gate_cif0_out",
-				"gate_timer5", "gate_aclk_vepu",
-				"gate_hclk_vepu", "gate_aclk_vdpu",
-				"gate_hclk_vdpu", "reserved",
-				"gate_timer6", "gate_aclk_gpu_src";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates4: gate-clk@200000e0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e0 0x4>;
-			clocks = <&clk_gates2 2>, <&clk_gates2 3>,
-				 <&clk_gates2 1>, <&clk_gates2 1>,
-				 <&clk_gates2 1>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates2 2>,
-				 <&clk_gates0 4>, <&clk_gates0 4>,
-				 <&clk_gates0 3>, <&dummy>,
-				 <&clk_gates0 3>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
-				"gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
-				"gate_aclk_pei_niu", "gate_hclk_usb_peri",
-				"gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
-				"gate_hclk_cpubus", "gate_hclk_ahb2apb",
-				"gate_aclk_strc_sys", "reserved",
-				"gate_aclk_intmem", "reserved",
-				"gate_hclk_imem1", "gate_hclk_imem0";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates5: gate-clk@200000e4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e4 0x4>;
-			clocks = <&clk_gates0 3>, <&clk_gates2 1>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates0 4>, <&clk_gates0 5>,
-				 <&clk_gates2 1>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates4 5>;
-
-			clock-output-names =
-				"gate_aclk_dmac1", "gate_aclk_dmac2",
-				"gate_pclk_efuse", "gate_pclk_tzpc",
-				"gate_pclk_grf", "gate_pclk_pmu",
-				"gate_hclk_rom", "gate_pclk_ddrupctl",
-				"gate_aclk_smc", "gate_hclk_nandc",
-				"gate_hclk_mmc0", "gate_hclk_mmc1",
-				"gate_hclk_emmc", "gate_hclk_otg0";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates6: gate-clk@200000e8 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000e8 0x4>;
-			clocks = <&clk_gates3 0>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates1 4>,
-				 <&clk_gates0 4>, <&clk_gates3 0>,
-				 <&dummy>, <&dummy>,
-				 <&clk_gates3 0>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&clk_gates1 4>,
-				 <&clk_gates0 4>, <&clk_gates3 0>;
-
-			clock-output-names =
-				"gate_aclk_lcdc0", "gate_hclk_lcdc0",
-				"gate_hclk_lcdc1", "gate_aclk_lcdc1",
-				"gate_hclk_cif0", "gate_aclk_cif0",
-				"reserved", "reserved",
-				"gate_aclk_ipp", "gate_hclk_ipp",
-				"gate_hclk_rga", "gate_aclk_rga",
-				"gate_hclk_vio_bus", "gate_aclk_vio0";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates7: gate-clk@200000ec {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000ec 0x4>;
-			clocks = <&clk_gates2 2>, <&clk_gates0 4>,
-				 <&clk_gates0 4>, <&dummy>,
-				 <&dummy>, <&clk_gates2 2>,
-				 <&clk_gates2 2>, <&clk_gates0 5>,
-				 <&dummy>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates2 3>;
-
-			clock-output-names =
-				"gate_hclk_emac", "gate_hclk_spdif",
-				"gate_hclk_i2s0_2ch", "gate_hclk_otg1",
-				"gate_hclk_hsic", "gate_hclk_hsadc",
-				"gate_hclk_pidf", "gate_pclk_timer0",
-				"reserved", "gate_pclk_timer2",
-				"gate_pclk_pwm01", "gate_pclk_pwm23",
-				"gate_pclk_spi0", "gate_pclk_spi1",
-				"gate_pclk_saradc", "gate_pclk_wdt";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates8: gate-clk@200000f0 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000f0 0x4>;
-			clocks = <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&clk_gates2 3>,
-				 <&clk_gates2 3>, <&clk_gates0 5>,
-				 <&clk_gates0 5>, <&clk_gates0 5>,
-				 <&clk_gates2 3>, <&dummy>;
-
-			clock-output-names =
-				"gate_pclk_uart0", "gate_pclk_uart1",
-				"gate_pclk_uart2", "gate_pclk_uart3",
-				"gate_pclk_i2c0", "gate_pclk_i2c1",
-				"gate_pclk_i2c2", "gate_pclk_i2c3",
-				"gate_pclk_i2c4", "gate_pclk_gpio0",
-				"gate_pclk_gpio1", "gate_pclk_gpio2",
-				"gate_pclk_gpio3", "gate_aclk_gps";
-
-			#clock-cells = <1>;
-		};
-
-		clk_gates9: gate-clk@200000f4 {
-			compatible = "rockchip,rk2928-gate-clk";
-			reg = <0x200000f4 0x4>;
-			clocks = <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>,
-				 <&dummy>, <&dummy>;
-
-			clock-output-names =
-				"gate_clk_core_dbg", "gate_pclk_dbg",
-				"gate_clk_trace", "gate_atclk",
-				"gate_clk_l2c", "gate_aclk_vio1",
-				"gate_pclk_publ", "gate_aclk_gpu";
-
-			#clock-cells = <1>;
-		};
-	};
-
-};
diff --git a/src/arm/rk3188-radxarock.dts b/src/arm/rk3188-radxarock.dts
deleted file mode 100644
index 5e4e3c238b2d..000000000000
--- a/src/arm/rk3188-radxarock.dts
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "rk3188.dtsi"
-
-/ {
-	model = "Radxa Rock";
-	compatible = "radxa,rock", "rockchip,rk3188";
-
-	memory {
-		reg = <0x60000000 0x80000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		button@0 {
-			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "GPIO Key Power";
-			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
-			debounce-interval = <100>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		green {
-			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		yellow {
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		sleep {
-			gpios = <&gpio0 15 0>;
-			default-state = "off";
-		};
-	};
-
-	ir_recv: gpio-ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 10 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ir_recv_pin>;
-	};
-
-	vcc_sd0: sdmmc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "sdmmc-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
-		startup-delay-us = <100000>;
-		vin-supply = <&vcc_io>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	act8846: act8846@5a {
-		compatible = "active-semi,act8846";
-		reg = <0x5a>;
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&act8846_dvs0_ctl>;
-
-		regulators {
-			vcc_ddr: REG1 {
-				regulator-name = "VCC_DDR";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vdd_log: REG2 {
-				regulator-name = "VDD_LOG";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vdd_arm: REG3 {
-				regulator-name = "VDD_ARM";
-				regulator-min-microvolt = <875000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-			};
-
-			vcc_io: REG4 {
-				regulator-name = "VCC_IO";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_10: REG5 {
-				regulator-name = "VDD_10";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vdd_hdmi: REG6 {
-				regulator-name = "VDD_HDMI";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vcc18: REG7 {
-				regulator-name = "VCC_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcca_33: REG8 {
-				regulator-name = "VCCA_33";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vcc_rmii: REG9 {
-				regulator-name = "VCC_RMII";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vccio_wl: REG10 {
-				regulator-name = "VCCIO_WL";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vcc_18: REG11 {
-				regulator-name = "VCC18_IO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcc28: REG12 {
-				regulator-name = "VCC_28";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&mmc0 {
-	num-slots = <1>;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
-	vmmc-supply = <&vcc_sd0>;
-
-	slot@0 {
-		reg = <0>;
-		bus-width = <4>;
-		disable-wp;
-	};
-};
-
-&pinctrl {
-	pcfg_output_low: pcfg-output-low {
-		output-low;
-	};
-
-	act8846 {
-		act8846_dvs0_ctl: act8846-dvs0-ctl {
-			rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
-		};
-	};
-
-	ir-receiver {
-		ir_recv_pin: ir-recv-pin {
-			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
diff --git a/src/arm/rk3188.dtsi b/src/arm/rk3188.dtsi
deleted file mode 100644
index ee801a9c6b74..000000000000
--- a/src/arm/rk3188.dtsi
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/clock/rk3188-cru.h>
-#include "rk3xxx.dtsi"
-
-/ {
-	compatible = "rockchip,rk3188";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "rockchip,rk3066-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0x3>;
-		};
-	};
-
-	sram: sram@10080000 {
-		compatible = "mmio-sram";
-		reg = <0x10080000 0x8000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x10080000 0x8000>;
-
-		smp-sram@0 {
-			compatible = "rockchip,rk3066-smp-sram";
-			reg = <0x0 0x50>;
-		};
-	};
-
-	cru: clock-controller@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	pinctrl: pinctrl {
-		compatible = "rockchip,rk3188-pinctrl";
-		rockchip,grf = <&grf>;
-		rockchip,pmu = <&pmu>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio0: gpio0@0x2000a000 {
-			compatible = "rockchip,rk3188-gpio-bank0";
-			reg = <0x2000a000 0x100>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO0>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio1@0x2003c000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2003c000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO1>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio2@2003e000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2003e000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO2>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio3@20080000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x20080000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO3>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pcfg_pull_up: pcfg_pull_up {
-			bias-pull-up;
-		};
-
-		pcfg_pull_down: pcfg_pull_down {
-			bias-pull-down;
-		};
-
-		pcfg_pull_none: pcfg_pull_none {
-			bias-disable;
-		};
-
-		i2c0 {
-			i2c0_xfer: i2c0-xfer {
-				rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c1 {
-			i2c1_xfer: i2c1-xfer {
-				rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c2 {
-			i2c2_xfer: i2c2-xfer {
-				rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c3 {
-			i2c3_xfer: i2c3-xfer {
-				rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_none>,
-						<RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_none>;
-			};
-		};
-
-		i2c4 {
-			i2c4_xfer: i2c4-xfer {
-				rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm0 {
-			pwm0_out: pwm0-out {
-				rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm1 {
-			pwm1_out: pwm1-out {
-				rockchip,pins = <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm2 {
-			pwm2_out: pwm2-out {
-				rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		pwm3 {
-			pwm3_out: pwm3-out {
-				rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart0 {
-			uart0_xfer: uart0-xfer {
-				rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
-						<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart0_cts: uart0-cts {
-				rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart0_rts: uart0-rts {
-				rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart1 {
-			uart1_xfer: uart1-xfer {
-				rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
-						<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart1_cts: uart1-cts {
-				rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart1_rts: uart1-rts {
-				rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart2 {
-			uart2_xfer: uart2-xfer {
-				rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
-						<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
-			};
-			/* no rts / cts for uart2 */
-		};
-
-		uart3 {
-			uart3_xfer: uart3-xfer {
-				rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
-						<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart3_cts: uart3-cts {
-				rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart3_rts: uart3-rts {
-				rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		sd0 {
-			sd0_clk: sd0-clk {
-				rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_cmd: sd0-cmd {
-				rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_cd: sd0-cd {
-				rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_wp: sd0-wp {
-				rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_pwr: sd0-pwr {
-				rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_bus1: sd0-bus-width1 {
-				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd0_bus4: sd0-bus-width4 {
-				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		sd1 {
-			sd1_clk: sd1-clk {
-				rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd1_cmd: sd1-cmd {
-				rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd1_cd: sd1-cd {
-				rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd1_wp: sd1-wp {
-				rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd1_bus1: sd1-bus-width1 {
-				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sd1_bus4: sd1-bus-width4 {
-				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
-						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-	};
-};
-
-&global_timer {
-	interrupts = <GIC_PPI 11 0xf04>;
-};
-
-&local_timer {
-	interrupts = <GIC_PPI 13 0xf04>;
-};
-
-&i2c0 {
-	compatible = "rockchip,rk3188-i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_xfer>;
-};
-
-&i2c1 {
-	compatible = "rockchip,rk3188-i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_xfer>;
-};
-
-&i2c2 {
-	compatible = "rockchip,rk3188-i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_xfer>;
-};
-
-&i2c3 {
-	compatible = "rockchip,rk3188-i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_xfer>;
-};
-
-&i2c4 {
-	compatible = "rockchip,rk3188-i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_xfer>;
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_out>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm1_out>;
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm2_out>;
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm3_out>;
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_xfer>;
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_xfer>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_xfer>;
-};
-
-&wdt {
-	compatible = "rockchip,rk3188-wdt", "snps,dw-wdt";
-};
diff --git a/src/arm/rk3288-evb-act8846.dts b/src/arm/rk3288-evb-act8846.dts
deleted file mode 100644
index 7d59ff4de408..000000000000
--- a/src/arm/rk3288-evb-act8846.dts
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "rk3288-evb.dtsi"
-
-/ {
-	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
-};
-
-&i2c0 {
-	hym8563@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-
-		interrupt-parent = <&gpio0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-
-		#clock-cells = <0>;
-		clock-output-names = "xin32k";
-	};
-
-	act8846: act8846@5a {
-		compatible = "active-semi,act8846";
-		reg = <0x5a>;
-		status = "okay";
-
-		regulators {
-			vcc_ddr: REG1 {
-				regulator-name = "VCC_DDR";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vcc_io: REG2 {
-				regulator-name = "VCC_IO";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_log: REG3 {
-				regulator-name = "VDD_LOG";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vcc_20: REG4 {
-				regulator-name = "VCC_20";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			vccio_sd: REG5 {
-				regulator-name = "VCCIO_SD";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd10_lcd: REG6 {
-				regulator-name = "VDD10_LCD";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vcca_codec: REG7 {
-				regulator-name = "VCCA_CODEC";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vcca_tp: REG8 {
-				regulator-name = "VCCA_TP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vccio_pmu: REG9 {
-				regulator-name = "VCCIO_PMU";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_10: REG10 {
-				regulator-name = "VDD_10";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vcc_18: REG11 {
-				regulator-name = "VCC_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcc18_lcd: REG12 {
-				regulator-name = "VCC18_LCD";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	hym8563 {
-		hym8563_int: hym8563-int {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-};
diff --git a/src/arm/rk3288-evb-rk808.dts b/src/arm/rk3288-evb-rk808.dts
deleted file mode 100644
index 9a88b6c66396..000000000000
--- a/src/arm/rk3288-evb-rk808.dts
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-#include "rk3288-evb.dtsi"
-
-/ {
-	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
-};
diff --git a/src/arm/rk3288-evb.dtsi b/src/arm/rk3288-evb.dtsi
deleted file mode 100644
index 4f572093c8b4..000000000000
--- a/src/arm/rk3288-evb.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "rk3288.dtsi"
-
-/ {
-	memory {
-		reg = <0x0 0x80000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn>;
-
-		button@0 {
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "GPIO Key Power";
-			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
-			debounce-interval = <100>;
-		};
-	};
-
-	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
-	vcc_host: vcc-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&host_vbus_drv>;
-		regulator-name = "vcc_host";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&wdt {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&pinctrl {
-	buttons {
-		pwrbtn: pwrbtn {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
-	usb {
-		host_vbus_drv: host-vbus-drv {
-			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-};
-
-&usb_host0_ehci {
-	status = "okay";
-};
diff --git a/src/arm/rk3288.dtsi b/src/arm/rk3288.dtsi
deleted file mode 100644
index 5950b0a53224..000000000000
--- a/src/arm/rk3288.dtsi
+++ /dev/null
@@ -1,595 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/clock/rk3288-cru.h>
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "rockchip,rk3288";
-
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@500 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a12";
-			reg = <0x500>;
-		};
-		cpu@501 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a12";
-			reg = <0x501>;
-		};
-		cpu@502 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a12";
-			reg = <0x502>;
-		};
-		cpu@503 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a12";
-			reg = <0x503>;
-		};
-	};
-
-	xin24m: oscillator {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xin24m";
-		#clock-cells = <0>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		clock-frequency = <24000000>;
-	};
-
-	i2c1: i2c@ff140000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff140000 0x1000>;
-		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_xfer>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@ff150000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff150000 0x1000>;
-		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C3>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_xfer>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@ff160000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff160000 0x1000>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_xfer>;
-		status = "disabled";
-	};
-
-	i2c5: i2c@ff170000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff170000 0x1000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C5>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_xfer>;
-		status = "disabled";
-	};
-
-	uart0: serial@ff180000 {
-		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
-		reg = <0xff180000 0x100>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_xfer>;
-		status = "disabled";
-	};
-
-	uart1: serial@ff190000 {
-		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
-		reg = <0xff190000 0x100>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
-		clock-names = "baudclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart1_xfer>;
-		status = "disabled";
-	};
-
-	uart2: serial@ff690000 {
-		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
-		reg = <0xff690000 0x100>;
-		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		clock-names = "baudclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart2_xfer>;
-		status = "disabled";
-	};
-
-	uart3: serial@ff1b0000 {
-		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
-		reg = <0xff1b0000 0x100>;
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
-		clock-names = "baudclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart3_xfer>;
-		status = "disabled";
-	};
-
-	uart4: serial@ff1c0000 {
-		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
-		reg = <0xff1c0000 0x100>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
-		clock-names = "baudclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart4_xfer>;
-		status = "disabled";
-	};
-
-	usb_host0_ehci: usb@ff500000 {
-		compatible = "generic-ehci";
-		reg = <0xff500000 0x100>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_USBHOST0>;
-		clock-names = "usbhost";
-		status = "disabled";
-	};
-
-	/* NOTE: ohci@ff520000 doesn't actually work on hardware */
-
-	usb_hsic: usb@ff5c0000 {
-		compatible = "generic-ehci";
-		reg = <0xff5c0000 0x100>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru HCLK_HSIC>;
-		clock-names = "usbhost";
-		status = "disabled";
-	};
-
-	i2c0: i2c@ff650000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff650000 0x1000>;
-		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_xfer>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@ff660000 {
-		compatible = "rockchip,rk3288-i2c";
-		reg = <0xff660000 0x1000>;
-		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_xfer>;
-		status = "disabled";
-	};
-
-	pmu: power-management@ff730000 {
-		compatible = "rockchip,rk3288-pmu", "syscon";
-		reg = <0xff730000 0x100>;
-	};
-
-	sgrf: syscon@ff740000 {
-		compatible = "rockchip,rk3288-sgrf", "syscon";
-		reg = <0xff740000 0x1000>;
-	};
-
-	cru: clock-controller@ff760000 {
-		compatible = "rockchip,rk3288-cru";
-		reg = <0xff760000 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3288-grf", "syscon";
-		reg = <0xff770000 0x1000>;
-	};
-
-	wdt: watchdog@ff800000 {
-		compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
-		reg = <0xff800000 0x100>;
-		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	gic: interrupt-controller@ffc01000 {
-		compatible = "arm,gic-400";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-
-		reg = <0xffc01000 0x1000>,
-		      <0xffc02000 0x1000>,
-		      <0xffc04000 0x2000>,
-		      <0xffc06000 0x2000>;
-		interrupts = <GIC_PPI 9 0xf04>;
-	};
-
-	pinctrl: pinctrl {
-		compatible = "rockchip,rk3288-pinctrl";
-		rockchip,grf = <&grf>;
-		rockchip,pmu = <&pmu>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio0: gpio0@ff750000 {
-			compatible = "rockchip,gpio-bank";
-			reg =	<0xff750000 0x100>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO0>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio1@ff780000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff780000 0x100>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO1>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio2@ff790000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff790000 0x100>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO2>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio3@ff7a0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7a0000 0x100>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO3>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio4@ff7b0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7b0000 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO4>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio5@ff7c0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7c0000 0x100>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO5>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio6@ff7d0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7d0000 0x100>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO6>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio7: gpio7@ff7e0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7e0000 0x100>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO7>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio8: gpio8@ff7f0000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0xff7f0000 0x100>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&cru PCLK_GPIO8>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pcfg_pull_up: pcfg-pull-up {
-			bias-pull-up;
-		};
-
-		pcfg_pull_down: pcfg-pull-down {
-			bias-pull-down;
-		};
-
-		pcfg_pull_none: pcfg-pull-none {
-			bias-disable;
-		};
-
-		i2c0 {
-			i2c0_xfer: i2c0-xfer {
-				rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
-						<0 16 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c1 {
-			i2c1_xfer: i2c1-xfer {
-				rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>,
-						<8 5 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c2 {
-			i2c2_xfer: i2c2-xfer {
-				rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>,
-						<6 10 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c3 {
-			i2c3_xfer: i2c3-xfer {
-				rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>,
-						<2 17 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c4 {
-			i2c4_xfer: i2c4-xfer {
-				rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>,
-						<7 18 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		i2c5 {
-			i2c5_xfer: i2c5-xfer {
-				rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>,
-						<7 20 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		sdmmc {
-			sdmmc_clk: sdmmc-clk {
-				rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			sdmmc_cmd: sdmmc-cmd {
-				rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
-			};
-
-			sdmmc_cd: sdmcc-cd {
-				rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
-			};
-
-			sdmmc_bus1: sdmmc-bus1 {
-				rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>;
-			};
-
-			sdmmc_bus4: sdmmc-bus4 {
-				rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>,
-						<6 17 RK_FUNC_1 &pcfg_pull_up>,
-						<6 18 RK_FUNC_1 &pcfg_pull_up>,
-						<6 19 RK_FUNC_1 &pcfg_pull_up>;
-			};
-		};
-
-		emmc {
-			emmc_clk: emmc-clk {
-				rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>;
-			};
-
-			emmc_cmd: emmc-cmd {
-				rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>;
-			};
-
-			emmc_pwr: emmc-pwr {
-				rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>;
-			};
-
-			emmc_bus1: emmc-bus1 {
-				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>;
-			};
-
-			emmc_bus4: emmc-bus4 {
-				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
-						<3 1 RK_FUNC_2 &pcfg_pull_up>,
-						<3 2 RK_FUNC_2 &pcfg_pull_up>,
-						<3 3 RK_FUNC_2 &pcfg_pull_up>;
-			};
-
-			emmc_bus8: emmc-bus8 {
-				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
-						<3 1 RK_FUNC_2 &pcfg_pull_up>,
-						<3 2 RK_FUNC_2 &pcfg_pull_up>,
-						<3 3 RK_FUNC_2 &pcfg_pull_up>,
-						<3 4 RK_FUNC_2 &pcfg_pull_up>,
-						<3 5 RK_FUNC_2 &pcfg_pull_up>,
-						<3 6 RK_FUNC_2 &pcfg_pull_up>,
-						<3 7 RK_FUNC_2 &pcfg_pull_up>;
-			};
-		};
-
-		uart0 {
-			uart0_xfer: uart0-xfer {
-				rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,
-						<4 17 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart0_cts: uart0-cts {
-				rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart0_rts: uart0-rts {
-				rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart1 {
-			uart1_xfer: uart1-xfer {
-				rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>,
-						<5 9 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart1_cts: uart1-cts {
-				rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart1_rts: uart1-rts {
-				rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart2 {
-			uart2_xfer: uart2-xfer {
-				rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>,
-						<7 23 RK_FUNC_1 &pcfg_pull_none>;
-			};
-			/* no rts / cts for uart2 */
-		};
-
-		uart3 {
-			uart3_xfer: uart3-xfer {
-				rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>,
-						<7 8 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart3_cts: uart3-cts {
-				rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
-			};
-
-			uart3_rts: uart3-rts {
-				rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>;
-			};
-		};
-
-		uart4 {
-			uart4_xfer: uart4-xfer {
-				rockchip,pins = <5 12 3 &pcfg_pull_up>,
-						<5 13 3 &pcfg_pull_none>;
-			};
-
-			uart4_cts: uart4-cts {
-				rockchip,pins = <5 14 3 &pcfg_pull_none>;
-			};
-
-			uart4_rts: uart4-rts {
-				rockchip,pins = <5 15 3 &pcfg_pull_none>;
-			};
-		};
-	};
-};
diff --git a/src/arm/rk3xxx.dtsi b/src/arm/rk3xxx.dtsi
deleted file mode 100644
index 8caf85d83901..000000000000
--- a/src/arm/rk3xxx.dtsi
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Copyright (c) 2013 MundoReader S.L.
- * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-	};
-
-	xin24m: oscillator {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-		clock-output-names = "xin24m";
-	};
-
-	L2: l2-cache-controller@10138000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x10138000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	scu@1013c000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x1013c000 0x100>;
-	};
-
-	global_timer: global-timer@1013c200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x1013c200 0x20>;
-		interrupts = <GIC_PPI 11 0x304>;
-		clocks = <&cru CORE_PERI>;
-	};
-
-	local_timer: local-timer@1013c600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x1013c600 0x20>;
-		interrupts = <GIC_PPI 13 0x304>;
-		clocks = <&cru CORE_PERI>;
-	};
-
-	gic: interrupt-controller@1013d000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x1013d000 0x1000>,
-		      <0x1013c100 0x0100>;
-	};
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clock-names = "baudclk", "apb_pclk";
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		status = "disabled";
-	};
-
-	uart1: serial@10126000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10126000 0x400>;
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clock-names = "baudclk", "apb_pclk";
-		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
-		status = "disabled";
-	};
-
-	mmc0: dwmmc@10214000 {
-		compatible = "rockchip,rk2928-dw-mshc";
-		reg = <0x10214000 0x1000>;
-		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
-		clock-names = "biu", "ciu";
-
-		status = "disabled";
-	};
-
-	mmc1: dwmmc@10218000 {
-		compatible = "rockchip,rk2928-dw-mshc";
-		reg = <0x10218000 0x1000>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
-		clock-names = "biu", "ciu";
-
-		status = "disabled";
-	};
-
-	pmu: pmu@20004000 {
-		compatible = "rockchip,rk3066-pmu", "syscon";
-		reg = <0x20004000 0x100>;
-	};
-
-	grf: grf@20008000 {
-		compatible = "syscon";
-		reg = <0x20008000 0x200>;
-	};
-
-	i2c0: i2c@2002d000 {
-		compatible = "rockchip,rk3066-i2c";
-		reg = <0x2002d000 0x1000>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-		rockchip,bus-index = <0>;
-
-		clock-names = "i2c";
-		clocks = <&cru PCLK_I2C0>;
-
-		status = "disabled";
-	};
-
-	i2c1: i2c@2002f000 {
-		compatible = "rockchip,rk3066-i2c";
-		reg = <0x2002f000 0x1000>;
-		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-
-		clocks = <&cru PCLK_I2C1>;
-		clock-names = "i2c";
-
-		status = "disabled";
-	};
-
-	pwm0: pwm@20030000 {
-		compatible = "rockchip,rk2928-pwm";
-		reg = <0x20030000 0x10>;
-		#pwm-cells = <2>;
-		clocks = <&cru PCLK_PWM01>;
-		status = "disabled";
-	};
-
-	pwm1: pwm@20030010 {
-		compatible = "rockchip,rk2928-pwm";
-		reg = <0x20030010 0x10>;
-		#pwm-cells = <2>;
-		clocks = <&cru PCLK_PWM01>;
-		status = "disabled";
-	};
-
-	wdt: watchdog@2004c000 {
-		compatible = "snps,dw-wdt";
-		reg = <0x2004c000 0x100>;
-		clocks = <&cru PCLK_WDT>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	pwm2: pwm@20050020 {
-		compatible = "rockchip,rk2928-pwm";
-		reg = <0x20050020 0x10>;
-		#pwm-cells = <2>;
-		clocks = <&cru PCLK_PWM23>;
-		status = "disabled";
-	};
-
-	pwm3: pwm@20050030 {
-		compatible = "rockchip,rk2928-pwm";
-		reg = <0x20050030 0x10>;
-		#pwm-cells = <2>;
-		clocks = <&cru PCLK_PWM23>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@20056000 {
-		compatible = "rockchip,rk3066-i2c";
-		reg = <0x20056000 0x1000>;
-		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-
-		clocks = <&cru PCLK_I2C2>;
-		clock-names = "i2c";
-
-		status = "disabled";
-	};
-
-	i2c3: i2c@2005a000 {
-		compatible = "rockchip,rk3066-i2c";
-		reg = <0x2005a000 0x1000>;
-		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-
-		clocks = <&cru PCLK_I2C3>;
-		clock-names = "i2c";
-
-		status = "disabled";
-	};
-
-	i2c4: i2c@2005e000 {
-		compatible = "rockchip,rk3066-i2c";
-		reg = <0x2005e000 0x1000>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rockchip,grf = <&grf>;
-
-		clocks = <&cru PCLK_I2C4>;
-		clock-names = "i2c";
-
-		status = "disabled";
-	};
-
-	uart2: serial@20064000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x20064000 0x400>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clock-names = "baudclk", "apb_pclk";
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		status = "disabled";
-	};
-
-	uart3: serial@20068000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x20068000 0x400>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clock-names = "baudclk", "apb_pclk";
-		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/s3c2416-pinctrl.dtsi b/src/arm/s3c2416-pinctrl.dtsi
deleted file mode 100644
index 527e3193817f..000000000000
--- a/src/arm/s3c2416-pinctrl.dtsi
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Samsung S3C2416 pinctrl settings
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&pinctrl_0 {
-	/*
-	 * Pin banks
-	 */
-
-	gpa: gpa {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpc: gpc {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpd: gpd {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe: gpe {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpf: gpf {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg: gpg {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph: gph {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpj: gpj {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpk: gpk {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpl: gpl {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpm: gpm {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	/*
-	 * Pin groups
-	 */
-
-	uart0_data: uart0-data {
-		samsung,pins = "gph-0", "gph-1";
-		samsung,pin-function = <2>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gph-8", "gph-9";
-		samsung,pin-function = <2>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gph-2", "gph-3";
-		samsung,pin-function = <2>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gph-10", "gph-11";
-		samsung,pin-function = <2>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gph-4", "gph-5";
-		samsung,pin-function = <2>;
-	};
-
-	uart2_fctl: uart2-fctl {
-		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <2>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <2>;
-	};
-
-	extuart_clk: extuart-clk {
-		samsung,pins = "gph-12";
-		samsung,pin-function = <2>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpe-14", "gpe-15";
-		samsung,pin-function = <2>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-		samsung,pin-function = <2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpe-5";
-		samsung,pin-function = <2>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpe-6";
-		samsung,pin-function = <2>;
-	};
-
-	sd0_bus1: sd0-bus1 {
-		samsung,pins = "gpe-7";
-		samsung,pin-function = <2>;
-	};
-
-	sd0_bus4: sd0-bus4 {
-		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-		samsung,pin-function = <2>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpl-8";
-		samsung,pin-function = <2>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpl-9";
-		samsung,pin-function = <2>;
-	};
-
-	sd1_bus1: sd1-bus1 {
-		samsung,pins = "gpl-0";
-		samsung,pin-function = <2>;
-	};
-
-	sd1_bus4: sd1-bus4 {
-		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-		samsung,pin-function = <2>;
-	};
-};
diff --git a/src/arm/s3c2416-smdk2416.dts b/src/arm/s3c2416-smdk2416.dts
deleted file mode 100644
index ea92fd69529a..000000000000
--- a/src/arm/s3c2416-smdk2416.dts
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * SAMSUNG SMDK2416 board device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "s3c2416.dtsi"
-
-/ {
-	model = "SMDK2416";
-	compatible = "samsung,s3c2416";
-
-	memory {
-		reg =  <0x30000000 0x4000000>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		xti: xti {
-			compatible = "fixed-clock";
-			clock-frequency = <12000000>;
-			clock-output-names = "xti";
-			#clock-cells = <0>;
-		};
-	};
-
-	serial@50000000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
-	};
-
-	serial@50004000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
-	};
-
-	serial@50008000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart2_data>;
-	};
-
-	serial@5000C000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart3_data>;
-	};
-
-	watchdog@53000000 {
-		status = "okay";
-	};
-
-	rtc@57000000 {
-		status = "okay";
-	};
-
-	sdhci@4AC00000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
-				<&sd0_bus1>, <&sd0_bus4>;
-		bus-width = <4>;
-		cd-gpios = <&gpf 1 0>;
-		cd-inverted;
-		status = "okay";
-	};
-
-	sdhci@4A800000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
-				<&sd1_bus1>, <&sd1_bus4>;
-		bus-width = <4>;
-		broken-cd;
-		status = "okay";
-	};
-};
diff --git a/src/arm/s3c2416.dtsi b/src/arm/s3c2416.dtsi
deleted file mode 100644
index 30b8f7e47454..000000000000
--- a/src/arm/s3c2416.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Samsung's S3C2416 SoC device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/s3c2443.h>
-#include "s3c24xx.dtsi"
-#include "s3c2416-pinctrl.dtsi"
-
-/ {
-	model = "Samsung S3C2416 SoC";
-	compatible = "samsung,s3c2416";
-
-	aliases {
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ejs";
-		};
-	};
-
-	interrupt-controller@4a000000 {
-		compatible = "samsung,s3c2416-irq";
-	};
-
-	clocks: clock-controller@0x4c000000 {
-		compatible = "samsung,s3c2416-clock";
-		reg = <0x4c000000 0x40>;
-		#clock-cells = <1>;
-	};
-
-	pinctrl@56000000 {
-		compatible = "samsung,s3c2416-pinctrl";
-	};
-
-	timer@51000000 {
-		clocks = <&clocks PCLK_PWM>;
-		clock-names = "timers";
-	};
-
-	serial@50000000 {
-		compatible = "samsung,s3c2440-uart";
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-				<&clocks SCLK_UART>;
-	};
-
-	serial@50004000 {
-		compatible = "samsung,s3c2440-uart";
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
-				<&clocks SCLK_UART>;
-	};
-
-	serial@50008000 {
-		compatible = "samsung,s3c2440-uart";
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
-				<&clocks SCLK_UART>;
-	};
-
-	uart3: serial@5000C000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x5000C000 0x4000>;
-		interrupts = <1 18 24 4>, <1 18 25 4>;
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
-				<&clocks SCLK_UART>;
-		status = "disabled";
-	};
-
-	sdhci@4AC00000 {
-		compatible = "samsung,s3c6410-sdhci";
-		reg = <0x4AC00000 0x100>;
-		interrupts = <0 0 21 3>;
-		clock-names = "hsmmc", "mmc_busclk.0",
-				"mmc_busclk.2";
-		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
-				<&clocks MUX_HSMMC0>;
-		status = "disabled";
-	};
-
-	sdhci@4A800000 {
-		compatible = "samsung,s3c6410-sdhci";
-		reg = <0x4A800000 0x100>;
-		interrupts = <0 0 20 3>;
-		clock-names = "hsmmc", "mmc_busclk.0",
-				"mmc_busclk.2";
-		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
-				<&clocks MUX_HSMMC1>;
-		status = "disabled";
-	};
-
-	watchdog@53000000 {
-		interrupts = <1 9 27 3>;
-		clocks = <&clocks PCLK_WDT>;
-		clock-names = "watchdog";
-	};
-
-	rtc@57000000 {
-		compatible = "samsung,s3c2416-rtc";
-		clocks = <&clocks PCLK_RTC>;
-		clock-names = "rtc";
-	};
-
-	i2c@54000000 {
-		compatible = "samsung,s3c2440-i2c";
-		clocks = <&clocks PCLK_I2C0>;
-		clock-names = "i2c";
-	};
-};
diff --git a/src/arm/s3c24xx.dtsi b/src/arm/s3c24xx.dtsi
deleted file mode 100644
index 5ed43b857cc4..000000000000
--- a/src/arm/s3c24xx.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Samsung's S3C24XX family device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "samsung,s3c24xx";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-	};
-
-	intc:interrupt-controller@4a000000 {
-		compatible = "samsung,s3c2410-irq";
-		reg = <0x4a000000 0x100>;
-		interrupt-controller;
-		#interrupt-cells = <4>;
-	};
-
-	pinctrl_0: pinctrl@56000000 {
-		reg = <0x56000000 0x1000>;
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,s3c2410-wakeup-eint";
-			interrupts = <0 0 0 3>,
-				     <0 0 1 3>,
-				     <0 0 2 3>,
-				     <0 0 3 3>,
-				     <0 0 4 4>,
-				     <0 0 5 4>;
-		};
-	};
-
-	timer@51000000 {
-		compatible = "samsung,s3c2410-pwm";
-		reg = <0x51000000 0x1000>;
-		interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
-		#pwm-cells = <4>;
-	};
-
-	uart0: serial@50000000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50000000 0x4000>;
-		interrupts = <1 28 0 4>, <1 28 1 4>;
-		status = "disabled";
-	};
-
-	uart1: serial@50004000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		status = "disabled";
-	};
-
-	uart2: serial@50008000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50008000 0x4000>;
-		interrupts = <1 15 6 4>, <1 15 7 4>;
-		status = "disabled";
-	};
-
-	watchdog@53000000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x53000000 0x100>;
-		interrupts = <0 0 9 3>;
-		status = "disabled";
-	};
-
-	rtc@57000000 {
-		compatible = "samsung,s3c2410-rtc";
-		reg = <0x57000000 0x100>;
-		interrupts = <0 0 30 3>, <0 0 8 3>;
-		status = "disabled";
-	};
-
-	i2c@54000000 {
-		compatible = "samsung,s3c2410-i2c";
-		reg = <0x54000000 0x100>;
-		interrupts = <0 0 27 3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/s3c6400.dtsi b/src/arm/s3c6400.dtsi
deleted file mode 100644
index a7d1c8ec150d..000000000000
--- a/src/arm/s3c6400.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Samsung's S3C6400 SoC device tree source
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "s3c64xx.dtsi"
-
-/ {
-	compatible = "samsung,s3c6400";
-};
-
-&vic0 {
-	valid-mask = <0xfffffe1f>;
-	valid-wakeup-mask = <0x00200004>;
-};
-
-&vic1 {
-	valid-mask = <0xffffffff>;
-	valid-wakeup-mask = <0x53020000>;
-};
-
-&soc {
-	clocks: clock-controller@7e00f000 {
-		compatible = "samsung,s3c6400-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-};
diff --git a/src/arm/s3c6410-mini6410.dts b/src/arm/s3c6410-mini6410.dts
deleted file mode 100644
index 57e00f9bce99..000000000000
--- a/src/arm/s3c6410-mini6410.dts
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Samsung's S3C6410 based Mini6410 board device tree source
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Device tree source file for FriendlyARM Mini6410 board which is based on
- * Samsung's S3C6410 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "s3c6410.dtsi"
-
-/ {
-	model = "FriendlyARM Mini6410 board based on S3C6410";
-	compatible = "friendlyarm,mini6410", "samsung,s3c6410";
-
-	memory {
-		reg = <0x50000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fin_pll: oscillator@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			clock-frequency = <12000000>;
-			clock-output-names = "fin_pll";
-			#clock-cells = <0>;
-		};
-
-		xusbxti: oscillator@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			clock-output-names = "xusbxti";
-			clock-frequency = <48000000>;
-			#clock-cells = <0>;
-		};
-	};
-
-	srom-cs1@18000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x18000000 0x8000000>;
-		ranges;
-
-		ethernet@18000000 {
-			compatible = "davicom,dm9000";
-			reg = <0x18000000 0x2 0x18000004 0x2>;
-			interrupt-parent = <&gpn>;
-			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-			davicom,no-eeprom;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys>;
-		autorepeat;
-
-		button-k1 {
-			label = "K1";
-			gpios = <&gpn 0 GPIO_ACTIVE_LOW>;
-			linux,code = <2>;
-			debounce-interval = <20>;
-		};
-
-		button-k2 {
-			label = "K2";
-			gpios = <&gpn 1 GPIO_ACTIVE_LOW>;
-			linux,code = <3>;
-			debounce-interval = <20>;
-		};
-
-		button-k3 {
-			label = "K3";
-			gpios = <&gpn 2 GPIO_ACTIVE_LOW>;
-			linux,code = <4>;
-			debounce-interval = <20>;
-		};
-
-		button-k4 {
-			label = "K4";
-			gpios = <&gpn 3 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-			debounce-interval = <20>;
-		};
-
-		button-k5 {
-			label = "K5";
-			gpios = <&gpn 4 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-			debounce-interval = <20>;
-		};
-
-		button-k6 {
-			label = "K6";
-			gpios = <&gpn 5 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-			debounce-interval = <20>;
-		};
-
-		button-k7 {
-			label = "K7";
-			gpios = <&gpl 11 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-			debounce-interval = <20>;
-		};
-
-		button-k8 {
-			label = "K8";
-			gpios = <&gpl 12 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_leds>;
-
-		led-1 {
-			label = "LED1";
-			gpios = <&gpk 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-2 {
-			label = "LED2";
-			gpios = <&gpk 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "mmc0";
-		};
-
-		led-3 {
-			label = "LED3";
-			gpios = <&gpk 6 GPIO_ACTIVE_LOW>;
-		};
-
-		led-4 {
-			label = "LED4";
-			gpios = <&gpk 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	buzzer {
-		compatible = "pwm-beeper";
-		pwms = <&pwm 0 1000000 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm0_out>;
-	};
-};
-
-&sdhci0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_data>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_data>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_data>;
-	status = "okay";
-};
-
-&pwm {
-	status = "okay";
-};
-
-&pinctrl0 {
-	gpio_leds: gpio-leds {
-		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	gpio_keys: gpio-keys {
-		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
-				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_bus>;
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-};
diff --git a/src/arm/s3c6410-smdk6410.dts b/src/arm/s3c6410-smdk6410.dts
deleted file mode 100644
index ecf35ec466f7..000000000000
--- a/src/arm/s3c6410-smdk6410.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Samsung S3C6410 based SMDK6410 board device tree source.
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Device tree source file for SAMSUNG SMDK6410 board which is based on
- * Samsung's S3C6410 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "s3c6410.dtsi"
-
-/ {
-	model = "SAMSUNG SMDK6410 board based on S3C6410";
-	compatible = "samsung,mini6410", "samsung,s3c6410";
-
-	memory {
-		reg = <0x50000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fin_pll: oscillator@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			clock-frequency = <12000000>;
-			clock-output-names = "fin_pll";
-			#clock-cells = <0>;
-		};
-
-		xusbxti: oscillator@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			clock-output-names = "xusbxti";
-			clock-frequency = <48000000>;
-			#clock-cells = <0>;
-		};
-	};
-
-	srom-cs1@18000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x18000000 0x8000000>;
-		ranges;
-
-		ethernet@18000000 {
-			compatible = "smsc,lan9115";
-			reg = <0x18000000 0x10000>;
-			interrupt-parent = <&gpn>;
-			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,force-internal-phy;
-		};
-	};
-};
-
-&sdhci0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_data>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_data>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_data>;
-	status = "okay";
-};
diff --git a/src/arm/s3c6410.dtsi b/src/arm/s3c6410.dtsi
deleted file mode 100644
index eb4226b3407c..000000000000
--- a/src/arm/s3c6410.dtsi
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Samsung's S3C6410 SoC device tree source
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "s3c64xx.dtsi"
-
-/ {
-	compatible = "samsung,s3c6410";
-
-	aliases {
-		i2c1 = &i2c1;
-	};
-};
-
-&vic0 {
-	valid-mask = <0xffffff7f>;
-	valid-wakeup-mask = <0x00200004>;
-};
-
-&vic1 {
-	valid-mask = <0xffffffff>;
-	valid-wakeup-mask = <0x53020000>;
-};
-
-&soc {
-	clocks: clock-controller@7e00f000 {
-		compatible = "samsung,s3c6410-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	i2c1: i2c@7f00f000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x7f00f000 0x1000>;
-		interrupt-parent = <&vic0>;
-		interrupts = <5>;
-		clock-names = "i2c";
-		clocks = <&clocks PCLK_IIC1>;
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
diff --git a/src/arm/s3c64xx-pinctrl.dtsi b/src/arm/s3c64xx-pinctrl.dtsi
deleted file mode 100644
index b1197d8b04de..000000000000
--- a/src/arm/s3c64xx-pinctrl.dtsi
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * Samsung's S3C64xx SoC series common device tree source
- * - pin control-related definitions
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are
- * listed as device tree nodes in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	2
-
-&pinctrl0 {
-	/*
-	 * Pin banks
-	 */
-
-	gpa: gpa {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc: gpc {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd: gpd {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe: gpe {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpf: gpf {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg: gpg {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph: gph {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpi: gpi {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpj: gpj {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpk: gpk {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpl: gpl {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm: gpm {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpn: gpn {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpo: gpo {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpp: gpp {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpq: gpq {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	/*
-	 * Pin groups
-	 */
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa-0", "gpa-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa-2", "gpa-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa-4", "gpa-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa-6", "gpa-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	ext_dma_0: ext-dma-0 {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	ext_dma_1: ext-dma-1 {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	irda_data_0: irda-data-0 {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	irda_data_1: irda-data-1 {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	irda_sdbw: irda-sdbw {
-		samsung,pins = "gpb-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpb-5", "gpb-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	i2c1_bus: i2c1-bus {
-		/* S3C6410-only */
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <6>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	spi0_cs: spi0-cs {
-		samsung,pins = "gpc-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	spi1_cs: spi1-cs {
-		samsung,pins = "gpc-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpg-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpg-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd0_bus1: sd0-bus1 {
-		samsung,pins = "gpg-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd0_bus4: sd0-bus4 {
-		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd0_cd: sd0-cd {
-		samsung,pins = "gpg-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gph-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gph-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd1_bus1: sd1-bus1 {
-		samsung,pins = "gph-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd1_bus4: sd1-bus4 {
-		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd1_bus8: sd1-bus8 {
-		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
-				"gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd1_cd: sd1-cd {
-		samsung,pins = "gpg-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-	};
-
-	sd2_cmd: sd2-cmd {
-		samsung,pins = "gpc-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd2_clk: sd2-clk {
-		samsung,pins = "gpc-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd2_bus1: sd2-bus1 {
-		samsung,pins = "gph-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	sd2_bus4: sd2-bus4 {
-		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s0_bus: i2s0-bus {
-		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s0_cdclk: i2s0-cdclk {
-		samsung,pins = "gpd-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s1_bus: i2s1-bus {
-		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s1_cdclk: i2s1-cdclk {
-		samsung,pins = "gpe-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		/* S3C6410-only */
-		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
-				"gph-8", "gph-9";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	i2s2_cdclk: i2s2-cdclk {
-		/* S3C6410-only */
-		samsung,pins = "gph-7";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pcm0_bus: pcm0-bus {
-		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pcm0_extclk: pcm0-extclk {
-		samsung,pins = "gpd-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pcm1_bus: pcm1-bus {
-		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pcm1_extclk: pcm1-extclk {
-		samsung,pins = "gpe-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	ac97_bus_0: ac97-bus-0 {
-		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	ac97_bus_1: ac97-bus-1 {
-		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	cam_port: cam-port {
-		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
-				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
-				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	cam_rst: cam-rst {
-		samsung,pins = "gpf-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	cam_field: cam-field {
-		/* S3C6410-only */
-		samsung,pins = "gpb-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pwm_extclk: pwm-extclk {
-		samsung,pins = "gpf-13";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pwm0_out: pwm0-out {
-		samsung,pins = "gpf-14";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	pwm1_out: pwm1-out {
-		samsung,pins = "gpf-15";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	clkout0: clkout-0 {
-		samsung,pins = "gpf-14";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col0_0: keypad-col0-0 {
-		samsung,pins = "gph-0";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col1_0: keypad-col1-0 {
-		samsung,pins = "gph-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col2_0: keypad-col2-0 {
-		samsung,pins = "gph-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col3_0: keypad-col3-0 {
-		samsung,pins = "gph-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col4_0: keypad-col4-0 {
-		samsung,pins = "gph-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col5_0: keypad-col5-0 {
-		samsung,pins = "gph-5";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col6_0: keypad-col6-0 {
-		samsung,pins = "gph-6";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col7_0: keypad-col7-0 {
-		samsung,pins = "gph-7";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col0_1: keypad-col0-1 {
-		samsung,pins = "gpl-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col1_1: keypad-col1-1 {
-		samsung,pins = "gpl-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col2_1: keypad-col2-1 {
-		samsung,pins = "gpl-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col3_1: keypad-col3-1 {
-		samsung,pins = "gpl-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col4_1: keypad-col4-1 {
-		samsung,pins = "gpl-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col5_1: keypad-col5-1 {
-		samsung,pins = "gpl-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col6_1: keypad-col6-1 {
-		samsung,pins = "gpl-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_col7_1: keypad-col7-1 {
-		samsung,pins = "gpl-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row0_0: keypad-row0-0 {
-		samsung,pins = "gpk-8";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row1_0: keypad-row1-0 {
-		samsung,pins = "gpk-9";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row2_0: keypad-row2-0 {
-		samsung,pins = "gpk-10";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row3_0: keypad-row3-0 {
-		samsung,pins = "gpk-11";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row4_0: keypad-row4-0 {
-		samsung,pins = "gpk-12";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row5_0: keypad-row5-0 {
-		samsung,pins = "gpk-13";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row6_0: keypad-row6-0 {
-		samsung,pins = "gpk-14";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row7_0: keypad-row7-0 {
-		samsung,pins = "gpk-15";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row0_1: keypad-row0-1 {
-		samsung,pins = "gpn-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row1_1: keypad-row1-1 {
-		samsung,pins = "gpn-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row2_1: keypad-row2-1 {
-		samsung,pins = "gpn-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row3_1: keypad-row3-1 {
-		samsung,pins = "gpn-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row4_1: keypad-row4-1 {
-		samsung,pins = "gpn-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row5_1: keypad-row5-1 {
-		samsung,pins = "gpn-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row6_1: keypad-row6-1 {
-		samsung,pins = "gpn-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	keypad_row7_1: keypad-row7-1 {
-		samsung,pins = "gpn-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	lcd_ctrl: lcd-ctrl {
-		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	lcd_data16: lcd-data-width16 {
-		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
-				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
-				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
-				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	lcd_data18: lcd-data-width18 {
-		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
-				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
-				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
-				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
-				"gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	lcd_data24: lcd-data-width24 {
-		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
-				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
-				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
-				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
-				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
-				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-
-	hsi_bus: hsi-bus {
-		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
-				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-	};
-};
diff --git a/src/arm/s3c64xx.dtsi b/src/arm/s3c64xx.dtsi
deleted file mode 100644
index ff5bdaac987a..000000000000
--- a/src/arm/s3c64xx.dtsi
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Samsung's S3C64xx SoC series common device tree source
- *
- * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
- *
- * Samsung's S3C64xx SoC series device nodes are listed in this file.
- * Particular SoCs from S3C64xx series can include this file and provide
- * values for SoCs specfic bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
-
-/ {
-	aliases {
-		i2c0 = &i2c0;
-		pinctrl0 = &pinctrl0;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm1176jzf-s", "arm,arm1176";
-			reg = <0x0>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vic0: interrupt-controller@71200000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x71200000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@71300000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0x71300000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		sdhci0: sdhci@7c200000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0x7c200000 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <24>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
-					<&clocks SCLK_MMC0>;
-			status = "disabled";
-		};
-
-		sdhci1: sdhci@7c300000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0x7c300000 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <25>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
-					<&clocks SCLK_MMC1>;
-			status = "disabled";
-		};
-
-		sdhci2: sdhci@7c400000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0x7c400000 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <17>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks HCLK_HSMMC2>, <&clocks HCLK_HSMMC2>,
-					<&clocks SCLK_MMC2>;
-			status = "disabled";
-		};
-
-		watchdog: watchdog@7e004000 {
-			compatible = "samsung,s3c2410-wdt";
-			reg = <0x7e004000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <26>;
-			clock-names = "watchdog";
-			clocks = <&clocks PCLK_WDT>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@7f004000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x7f004000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <18>;
-			clock-names = "i2c";
-			clocks = <&clocks PCLK_IIC0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		uart0: serial@7f005000 {
-			compatible = "samsung,s3c6400-uart";
-			reg = <0x7f005000 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <5>;
-			clock-names = "uart", "clk_uart_baud2",
-					"clk_uart_baud3";
-			clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-					<&clocks SCLK_UART>;
-			status = "disabled";
-		};
-
-		uart1: serial@7f005400 {
-			compatible = "samsung,s3c6400-uart";
-			reg = <0x7f005400 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <6>;
-			clock-names = "uart", "clk_uart_baud2",
-					"clk_uart_baud3";
-			clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
-					<&clocks SCLK_UART>;
-			status = "disabled";
-		};
-
-		uart2: serial@7f005800 {
-			compatible = "samsung,s3c6400-uart";
-			reg = <0x7f005800 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <7>;
-			clock-names = "uart", "clk_uart_baud2",
-					"clk_uart_baud3";
-			clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
-					<&clocks SCLK_UART>;
-			status = "disabled";
-		};
-
-		uart3: serial@7f005c00 {
-			compatible = "samsung,s3c6400-uart";
-			reg = <0x7f005c00 0x100>;
-			interrupt-parent = <&vic1>;
-			interrupts = <8>;
-			clock-names = "uart", "clk_uart_baud2",
-					"clk_uart_baud3";
-			clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
-					<&clocks SCLK_UART>;
-			status = "disabled";
-		};
-
-		pwm: pwm@7f006000 {
-			compatible = "samsung,s3c6400-pwm";
-			reg = <0x7f006000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <23>, <24>, <25>, <27>, <28>;
-			clock-names = "timers";
-			clocks = <&clocks PCLK_PWM>;
-			samsung,pwm-outputs = <0>, <1>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		pinctrl0: pinctrl@7f008000 {
-			compatible = "samsung,s3c64xx-pinctrl";
-			reg = <0x7f008000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <21>;
-
-			pctrl_int_map: pinctrl-interrupt-map {
-				interrupt-map = <0 &vic0 0>,
-						<1 &vic0 1>,
-						<2 &vic1 0>,
-						<3 &vic1 1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-			};
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,s3c64xx-wakeup-eint";
-				interrupts = <0>, <1>, <2>, <3>;
-				interrupt-parent = <&pctrl_int_map>;
-			};
-		};
-	};
-};
-
-#include "s3c64xx-pinctrl.dtsi"
diff --git a/src/arm/s5pv210-aquila.dts b/src/arm/s5pv210-aquila.dts
deleted file mode 100644
index aa31b84a707a..000000000000
--- a/src/arm/s5pv210-aquila.dts
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Board device tree source for Samsung Aquila board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "s5pv210.dtsi"
-
-/ {
-	model = "Samsung Aquila based on S5PC110";
-	compatible = "samsung,aquila", "samsung,s5pv210";
-
-	aliases {
-		i2c3 = &i2c_pmic;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x18000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vtf_reg: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "V_TF_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpios = <&mp05 4 0>;
-			enable-active-high;
-		};
-
-		pda_reg: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "VCC_1.8V_PDA";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			reg = <1>;
-		};
-
-		bat_reg: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "V_BAT";
-			regulator-min-microvolt = <3700000>;
-			regulator-max-microvolt = <3700000>;
-			reg = <2>;
-		};
-	};
-
-	i2c_pmic: i2c-pmic {
-		compatible = "i2c-gpio";
-		gpios = <&gpj4 0 0>, /* sda */
-			<&gpj4 3 0>; /* scl */
-		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmic@66 {
-			compatible = "national,lp3974";
-			reg = <0x66>;
-
-			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
-							<&gph0 4 0>;
-			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
-							<1200000>, <1200000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
-			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB+MIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VCC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VCC_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB+VDAC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC+VCAM_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_IO_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "CAM_ISP_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "CAM_A_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "CAM_CIF_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_AF_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "CAM_8M_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "VARM_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VINT_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "CAM_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				vichg_reg: ENVICHG {
-					regulator-name = "VICHG";
-				};
-
-				safeout1_reg: ESAFEOUT1 {
-					regulator-name = "SAFEOUT1";
-					regulator-always-on;
-				};
-
-				safeout2_reg: ESAFEOUT2 {
-					regulator-name = "SAFEOUT2";
-					regulator-boot-on;
-				};
-			};
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&gph2 6 1>;
-			linux,code = <KEY_POWER>;
-			label = "power";
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&keypad {
-	linux,input-no-autorepeat;
-	linux,input-wakeup;
-	samsung,keypad-num-rows = <3>;
-	samsung,keypad-num-columns = <3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
-			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
-	status = "okay";
-
-	key_1 {
-		keypad,row = <0>;
-		keypad,column = <1>;
-		linux,code = <KEY_CONNECT>;
-	};
-
-	key_2 {
-		keypad,row = <0>;
-		keypad,column = <2>;
-		linux,code = <KEY_BACK>;
-	};
-
-	key_3 {
-		keypad,row = <1>;
-		keypad,column = <1>;
-		linux,code = <KEY_CAMERA_FOCUS>;
-	};
-
-	key_4 {
-		keypad,row = <1>;
-		keypad,column = <2>;
-		linux,code = <KEY_VOLUMEUP>;
-	};
-
-	key_5 {
-		keypad,row = <2>;
-		keypad,column = <1>;
-		linux,code = <KEY_CAMERA>;
-	};
-
-	key_6 {
-		keypad,row = <2>;
-		keypad,column = <2>;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&sdhci0 {
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-	vmmc-supply = <&ldo5_reg>;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
-	pinctrl-names = "default";
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	cd-gpios = <&gph3 4 1>;
-	vmmc-supply = <&vtf_reg>;
-	cd-inverted;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&onenand {
-	status = "okay";
-};
-
-&hsotg {
-	vusb_a-supply = <&ldo3_reg>;
-	vusb_d-supply = <&ldo8_reg>;
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <0>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <16>;
-			hback-porch = <16>;
-			hsync-len = <2>;
-			vback-porch = <3>;
-			vfront-porch = <28>;
-			vsync-len = <1>;
-		};
-	};
-};
-
-&pinctrl0 {
-	t_flash_detect: t-flash-detect {
-		samsung,pins = "gph3-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-	};
-};
diff --git a/src/arm/s5pv210-goni.dts b/src/arm/s5pv210-goni.dts
deleted file mode 100644
index 6387c77a6f7b..000000000000
--- a/src/arm/s5pv210-goni.dts
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Board device tree source for Samsung Goni board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "s5pv210.dtsi"
-
-/ {
-	model = "Samsung Goni based on S5PC110";
-	compatible = "samsung,goni", "samsung,s5pv210";
-
-	aliases {
-		i2c3 = &i2c_pmic;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x10000000
-			0x50000000 0x08000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vtf_reg: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "V_TF_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			reg = <0>;
-			gpios = <&mp05 4 0>;
-			enable-active-high;
-		};
-
-		pda_reg: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "VCC_1.8V_PDA";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			reg = <1>;
-		};
-
-		bat_reg: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "V_BAT";
-			regulator-min-microvolt = <3700000>;
-			regulator-max-microvolt = <3700000>;
-			reg = <2>;
-		};
-
-		tsp_reg: fixed-regulator@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "TSP_VDD";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			reg = <3>;
-			gpios = <&gpj1 3 0>;
-			enable-active-high;
-		};
-	};
-
-	i2c_pmic: i2c-pmic {
-		compatible = "i2c-gpio";
-		gpios = <&gpj4 0 0>, /* sda */
-			<&gpj4 3 0>; /* scl */
-		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmic@66 {
-			compatible = "national,lp3974";
-			reg = <0x66>;
-
-			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
-							<&gph0 4 0>;
-			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
-							<1200000>, <1200000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
-			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB+MIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VCC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VLCD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB+VDAC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC+VCAM_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-boot-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_IO_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "CAM_ISP_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "CAM_A_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "CAM_CIF_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_AF_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "CAM_8M_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "VARM_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VINT_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "CAM_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power-key {
-			gpios = <&gph2 6 1>;
-			linux,code = <KEY_POWER>;
-			label = "power";
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&keypad {
-	linux,input-no-autorepeat;
-	linux,input-wakeup;
-	samsung,keypad-num-rows = <3>;
-	samsung,keypad-num-columns = <3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
-			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
-	status = "okay";
-
-	key_1 {
-		keypad,row = <0>;
-		keypad,column = <1>;
-		linux,code = <KEY_CONNECT>;
-	};
-
-	key_2 {
-		keypad,row = <0>;
-		keypad,column = <2>;
-		linux,code = <KEY_BACK>;
-	};
-
-	key_3 {
-		keypad,row = <1>;
-		keypad,column = <1>;
-		linux,code = <KEY_CAMERA_FOCUS>;
-	};
-
-	key_4 {
-		keypad,row = <1>;
-		keypad,column = <2>;
-		linux,code = <KEY_VOLUMEUP>;
-	};
-
-	key_5 {
-		keypad,row = <2>;
-		keypad,column = <1>;
-		linux,code = <KEY_CAMERA>;
-	};
-
-	key_6 {
-		keypad,row = <2>;
-		keypad,column = <2>;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&sdhci0 {
-	bus-width = <4>;
-	non-removable;
-	vmmc-supply = <&ldo5_reg>;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	cd-gpios = <&gph3 4 1>;
-	vmmc-supply = <&vtf_reg>;
-	cd-inverted;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hsotg {
-	vusb_a-supply = <&ldo3_reg>;
-	vusb_d-supply = <&ldo8_reg>;
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&i2c2 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <400000>;
-	samsung,i2c-slave-addr = <0x10>;
-	status = "okay";
-
-	tsp@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpj0>;
-		interrupts = <5 2>;
-
-		atmel,x-line = <17>;
-		atmel,y-line = <11>;
-		atmel,x-size = <800>;
-		atmel,y-size = <480>;
-		atmel,burst-length = <0x21>;
-		atmel,threshold = <0x28>;
-		atmel,orientation = <1>;
-
-		vdd-supply = <&tsp_reg>;
-	};
-};
-
-&i2c0 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <100000>;
-	samsung,i2c-slave-addr = <0x10>;
-	status = "okay";
-
-	noon010pc30: sensor@30 {
-		compatible = "siliconfile,noon010pc30";
-		reg = <0x30>;
-		vddio-supply = <&ldo11_reg>;
-		vdda-supply = <&ldo13_reg>;
-		vdd_core-supply = <&ldo14_reg>;
-
-		clock-frequency = <16000000>;
-		clocks = <&clock_cam 0>;
-		clock-names = "mclk";
-		nreset-gpios = <&gpb 2 0>;
-		nstby-gpios = <&gpb 0 0>;
-
-		port {
-			noon010pc30_ep: endpoint {
-				remote-endpoint = <&fimc0_ep>;
-				bus-width = <8>;
-				hsync-active = <0>;
-				vsync-active = <1>;
-				pclk-sample = <1>;
-			};
-		};
-	};
-};
-
-&camera {
-	pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
-	pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
-	pinctrl-names = "default", "idle";
-
-	parallel-ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* camera A input */
-		port@1 {
-			reg = <1>;
-			fimc0_ep: endpoint {
-				remote-endpoint = <&noon010pc30_ep>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				pclk-sample = <0>;
-			};
-		};
-	};
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			/* 480x800@55Hz */
-			clock-frequency = <23439570>;
-			hactive = <480>;
-			hfront-porch = <16>;
-			hback-porch = <16>;
-			hsync-len = <2>;
-			vactive = <800>;
-			vback-porch = <2>;
-			vfront-porch = <28>;
-			vsync-len = <1>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <0>;
-			pixelclk-active = <0>;
-		};
-	};
-};
-
-&onenand {
-	status = "okay";
-};
diff --git a/src/arm/s5pv210-pinctrl.dtsi b/src/arm/s5pv210-pinctrl.dtsi
deleted file mode 100644
index 8c714088e3c6..000000000000
--- a/src/arm/s5pv210-pinctrl.dtsi
+++ /dev/null
@@ -1,839 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&pinctrl0 {
-	gpa0: gpa0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe0: gpe0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpe1: gpe1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf2: gpf2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf3: gpf3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg0: gpg0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg1: gpg1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg2: gpg2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg3: gpg3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj0: gpj0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj1: gpj1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj2: gpj2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj3: gpj3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj4: gpj4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpgi: gpgi {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp01: mp01 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp02: mp02 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp03: mp03 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp04: mp04 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp05: mp05 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp06: mp06 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	mp07: mp07 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gph0: gph0 {
-		gpio-controller;
-		interrupt-controller;
-		interrupt-parent = <&vic0>;
-		interrupts = <0>, <1>, <2>, <3>,
-				<4>, <5>, <6>, <7>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-	};
-
-	gph1: gph1 {
-		gpio-controller;
-		interrupt-controller;
-		interrupt-parent = <&vic0>;
-		interrupts = <8>, <9>, <10>, <11>,
-				<12>, <13>, <14>, <15>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-	};
-
-	gph2: gph2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-	};
-
-	gph3: gph3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart2_fctl: uart2-fctl {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart_audio: uart-audio {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s0_bus: i2s0-bus {
-		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
-				"gpi-4", "gpi-5", "gpi-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s1_bus: i2s1-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pcm1_bus: pcm1-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	ac97_bus: ac97-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pcm2_bus: pcm2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	spdif_bus: spdif-bus {
-		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi2_bus: spi2-bus {
-		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c1_bus: i2c1-bus {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c2_bus: i2c2-bus {
-		samsung,pins = "gpd1-4", "gpd1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm0_out: pwm0-out {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm1_out: pwm1-out {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm2_out: pwm2-out {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm3_out: pwm3-out {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row0: keypad-row-0 {
-		samsung,pins = "gph3-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row1: keypad-row-1 {
-		samsung,pins = "gph3-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row2: keypad-row-2 {
-		samsung,pins = "gph3-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row3: keypad-row-3 {
-		samsung,pins = "gph3-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row4: keypad-row-4 {
-		samsung,pins = "gph3-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row5: keypad-row-5 {
-		samsung,pins = "gph3-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row6: keypad-row-6 {
-		samsung,pins = "gph3-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_row7: keypad-row-7 {
-		samsung,pins = "gph3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col0: keypad-col-0 {
-		samsung,pins = "gph2-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col1: keypad-col-1 {
-		samsung,pins = "gph2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col2: keypad-col-2 {
-		samsung,pins = "gph2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col3: keypad-col-3 {
-		samsung,pins = "gph2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col4: keypad-col-4 {
-		samsung,pins = "gph2-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col5: keypad-col-5 {
-		samsung,pins = "gph2-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col6: keypad-col-6 {
-		samsung,pins = "gph2-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	keypad_col7: keypad-col-7 {
-		samsung,pins = "gph2-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpg0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpg0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cd: sd0-cd {
-		samsung,pins = "gpg0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus1: sd0-bus-width1 {
-		samsung,pins = "gpg0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus4: sd0-bus-width4 {
-		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus8: sd0-bus-width8 {
-		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpg1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpg1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cd: sd1-cd {
-		samsung,pins = "gpg1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pins = "gpg1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_clk: sd2-clk {
-		samsung,pins = "gpg2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_cmd: sd2-cmd {
-		samsung,pins = "gpg2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_cd: sd2-cd {
-		samsung,pins = "gpg2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus1: sd2-bus-width1 {
-		samsung,pins = "gpg2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus4: sd2-bus-width4 {
-		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus8: sd2-bus-width8 {
-		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd3_clk: sd3-clk {
-		samsung,pins = "gpg3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd3_cmd: sd3-cmd {
-		samsung,pins = "gpg3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd3_cd: sd3-cd {
-		samsung,pins = "gpg3-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd3_bus1: sd3-bus-width1 {
-		samsung,pins = "gpg3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd3_bus4: sd3-bus-width4 {
-		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
-	};
-
-	eint0: ext-int0 {
-		samsung,pins = "gph0-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	eint8: ext-int8 {
-		samsung,pins = "gph1-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	eint15: ext-int15 {
-		samsung,pins = "gph1-7";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	eint16: ext-int16 {
-		samsung,pins = "gph2-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	eint31: ext-int31 {
-		samsung,pins = "gph3-7";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_a_io: cam-port-a-io {
-		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_a_clk_active: cam-port-a-clk-active {
-		samsung,pins = "gpe1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
-		samsung,pins = "gpe1-3";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_b_io: cam-port-b-io {
-		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-
-		lcd_ctrl: lcd-ctrl {
-		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	lcd_sync: lcd-sync {
-		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	lcd_clk: lcd-clk {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	lcd_data24: lcd-data-width24 {
-		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
diff --git a/src/arm/s5pv210-smdkc110.dts b/src/arm/s5pv210-smdkc110.dts
deleted file mode 100644
index 1eedab7ffe94..000000000000
--- a/src/arm/s5pv210-smdkc110.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Board device tree source for YIC System SMDC110 board.
- *
- * NOTE: This file is completely based on original board file for mach-smdkc110
- * available in Linux 3.15 and intends to provide equivalent level of hardware
- * support. Due to lack of hardware, _no_ testing has been performed.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "s5pv210.dtsi"
-
-/ {
-	model = "YIC System SMDKC110 based on S5PC110";
-	compatible = "yic,smdkc110", "samsung,s5pv210";
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x20000000 0x20000000>;
-	};
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	audio-codec@1b {
-		compatible = "wlf,wm8580";
-		reg = <0x1b>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
diff --git a/src/arm/s5pv210-smdkv210.dts b/src/arm/s5pv210-smdkv210.dts
deleted file mode 100644
index cb8521899ec8..000000000000
--- a/src/arm/s5pv210-smdkv210.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Board device tree source for YIC System SMDV210 board.
- *
- * NOTE: This file is completely based on original board file for mach-smdkv210
- * available in Linux 3.15 and intends to provide equivalent level of hardware
- * support. Due to lack of hardware, _no_ testing has been performed.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "s5pv210.dtsi"
-
-/ {
-	model = "YIC System SMDKV210 based on S5PV210";
-	compatible = "yic,smdkv210", "samsung,s5pv210";
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x20000000 0x40000000>;
-	};
-
-	ethernet@18000000 {
-		compatible = "davicom,dm9000";
-		reg = <0xA8000000 0x2 0xA8000002 0x2>;
-		interrupt-parent = <&gph1>;
-		interrupts = <1 4>;
-		local-mac-address = [00 00 de ad be ef];
-		davicom,no-eeprom;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000 0>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm3_out>;
-	};
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&keypad {
-	linux,input-no-autorepeat;
-	linux,input-wakeup;
-	samsung,keypad-num-rows = <8>;
-	samsung,keypad-num-columns = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
-			<&keypad_row3>, <&keypad_row4>, <&keypad_row5>,
-			<&keypad_row6>, <&keypad_row7>,
-			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>,
-			<&keypad_col3>, <&keypad_col4>, <&keypad_col5>,
-			<&keypad_col6>, <&keypad_col7>;
-	status = "okay";
-
-	key_1 {
-		keypad,row = <0>;
-		keypad,column = <3>;
-		linux,code = <KEY_1>;
-	};
-
-	key_2 {
-		keypad,row = <0>;
-		keypad,column = <4>;
-		linux,code = <KEY_2>;
-	};
-
-	key_3 {
-		keypad,row = <0>;
-		keypad,column = <5>;
-		linux,code = <KEY_3>;
-	};
-
-	key_4 {
-		keypad,row = <0>;
-		keypad,column = <6>;
-		linux,code = <KEY_4>;
-	};
-
-	key_5 {
-		keypad,row = <0
-		>;
-		keypad,column = <7>;
-		linux,code = <KEY_5>;
-	};
-
-	key_6 {
-		keypad,row = <1>;
-		keypad,column = <3>;
-		linux,code = <KEY_A>;
-	};
-	key_7 {
-		keypad,row = <1>;
-		keypad,column = <4>;
-		linux,code = <KEY_B>;
-	};
-
-	key_8 {
-		keypad,row = <1>;
-		keypad,column = <5>;
-		linux,code = <KEY_C>;
-	};
-
-	key_9 {
-		keypad,row = <1>;
-		keypad,column = <6>;
-		linux,code = <KEY_D>;
-	};
-
-	key_10 {
-		keypad,row = <1>;
-		keypad,column = <7>;
-		linux,code = <KEY_E>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdhci0 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci1 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci3 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&hsotg {
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	display-timings {
-		native-mode = <&timing0>;
-
-		timing0: timing@0 {
-			/* 800x480@60Hz */
-			clock-frequency = <24373920>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <8>;
-			hback-porch = <13>;
-			hsync-len = <3>;
-			vback-porch = <7>;
-			vfront-porch = <5>;
-			vsync-len = <1>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-	};
-};
-
-&pwm {
-	samsung,pwm-outputs = <3>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	audio-codec@1b {
-		compatible = "wlf,wm8580";
-		reg = <0x1b>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c08";
-		reg = <0x50>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
diff --git a/src/arm/s5pv210-torbreck.dts b/src/arm/s5pv210-torbreck.dts
deleted file mode 100644
index 622599fd2cfa..000000000000
--- a/src/arm/s5pv210-torbreck.dts
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Board device tree source for Torbreck board.
- *
- * NOTE: This file is completely based on original board file for mach-torbreck
- * available in Linux 3.15 and intends to provide equivalent level of hardware
- * support. Due to lack of hardware, _no_ testing has been performed.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "s5pv210.dtsi"
-
-/ {
-	model = "aESOP Torbreck based on S5PV210";
-	compatible = "aesop,torbreck", "samsung,s5pv210";
-
-	chosen {
-		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x20000000 0x20000000>;
-	};
-};
-
-&xusbxti {
-	clock-frequency = <24000000>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdhci0 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci1 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&sdhci3 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2s0 {
-	status = "okay";
-};
diff --git a/src/arm/s5pv210.dtsi b/src/arm/s5pv210.dtsi
deleted file mode 100644
index 8344a0ee2b86..000000000000
--- a/src/arm/s5pv210.dtsi
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * Samsung's S5PV210 SoC device tree source
- *
- * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
- *
- * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
- * Tomasz Figa <t.figa@samsung.com>
- *
- * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/s5pv210.h>
-#include <dt-bindings/clock/s5pv210-audss.h>
-
-/ {
-	aliases {
-		csis0 = &csis0;
-		fimc0 = &fimc0;
-		fimc1 = &fimc1;
-		fimc2 = &fimc2;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2s0 = &i2s0;
-		i2s1 = &i2s1;
-		i2s2 = &i2s2;
-		pinctrl0 = &pinctrl0;
-		spi0 = &spi0;
-		spi1 = &spi1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		external-clocks {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			xxti: oscillator@0 {
-				compatible = "fixed-clock";
-				reg = <0>;
-				clock-frequency = <0>;
-				clock-output-names = "xxti";
-				#clock-cells = <0>;
-			};
-
-			xusbxti: oscillator@1 {
-				compatible = "fixed-clock";
-				reg = <1>;
-				clock-frequency = <0>;
-				clock-output-names = "xusbxti";
-				#clock-cells = <0>;
-			};
-		};
-
-		onenand: onenand@b0000000 {
-			compatible = "samsung,s5pv210-onenand";
-			reg = <0xb0600000 0x2000>,
-				<0xb0000000 0x20000>,
-				<0xb0040000 0x20000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <31>;
-			clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
-			clock-names = "bus", "onenand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		chipid@e0000000 {
-			compatible = "samsung,s5pv210-chipid";
-			reg = <0xe0000000 0x1000>;
-		};
-
-		clocks: clock-controller@e0100000 {
-			compatible = "samsung,s5pv210-clock", "simple-bus";
-			reg = <0xe0100000 0x10000>;
-			clock-names = "xxti", "xusbxti";
-			clocks = <&xxti>, <&xusbxti>;
-			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pmu_syscon: syscon@e0108000 {
-				compatible = "samsung-s5pv210-pmu", "syscon";
-				reg = <0xe0108000 0x8000>;
-			};
-		};
-
-		pinctrl0: pinctrl@e0200000 {
-			compatible = "samsung,s5pv210-pinctrl";
-			reg = <0xe0200000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <30>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupts = <16>;
-				interrupt-parent = <&vic0>;
-			};
-		};
-
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "arm,amba-bus";
-			ranges;
-
-			pdma0: dma@e0900000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0900000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <19>;
-				clocks = <&clocks CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: dma@e0a00000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0a00000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <20>;
-				clocks = <&clocks CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-		};
-
-		spi0: spi@e1300000 {
-			compatible = "samsung,s5pv210-spi";
-			reg = <0xe1300000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <15>;
-			dmas = <&pdma0 7>, <&pdma0 6>;
-			dma-names = "tx", "rx";
-			clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi1: spi@e1400000 {
-			compatible = "samsung,s5pv210-spi";
-			reg = <0xe1400000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <16>;
-			dmas = <&pdma1 7>, <&pdma1 6>;
-			dma-names = "tx", "rx";
-			clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		keypad: keypad@e1600000 {
-			compatible = "samsung,s5pv210-keypad";
-			reg = <0xe1600000 0x1000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <25>;
-			clocks = <&clocks CLK_KEYIF>;
-			clock-names = "keypad";
-			status = "disabled";
-		};
-
-		i2c0: i2c@e1800000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0xe1800000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <14>;
-			clocks = <&clocks CLK_I2C0>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_bus>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@e1a00000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0xe1a00000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <19>;
-			clocks = <&clocks CLK_I2C2>;
-			clock-names = "i2c";
-			pinctrl-0 = <&i2c2_bus>;
-			pinctrl-names = "default";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		audio-subsystem {
-			compatible = "samsung,s5pv210-audss", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clk_audss: clock-controller@eee10000 {
-				compatible = "samsung,s5pv210-audss-clock";
-				reg = <0xeee10000 0x1000>;
-				clock-names = "hclk", "xxti",
-						"fout_epll",
-						"sclk_audio0";
-				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
-						<&clocks FOUT_EPLL>,
-						<&clocks SCLK_AUDIO0>;
-				#clock-cells = <1>;
-			};
-
-			i2s0: i2s@eee30000 {
-				compatible = "samsung,s5pv210-i2s";
-				reg = <0xeee30000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <16>;
-				dma-names = "rx", "tx", "tx-sec";
-				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
-				clock-names = "iis",
-						"i2s_opclk0",
-						"i2s_opclk1";
-				clocks = <&clk_audss CLK_I2S>,
-						<&clk_audss CLK_I2S>,
-						<&clk_audss CLK_DOUT_AUD_BUS>;
-				samsung,idma-addr = <0xc0010000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2s0_bus>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		i2s1: i2s@e2100000 {
-			compatible = "samsung,s3c6410-i2s";
-			reg = <0xe2100000 0x1000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <17>;
-			dma-names = "rx", "tx";
-			dmas = <&pdma1 12>, <&pdma1 13>;
-			clock-names = "iis", "i2s_opclk0";
-			clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s1_bus>;
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
-		i2s2: i2s@e2a00000 {
-			compatible = "samsung,s3c6410-i2s";
-			reg = <0xe2a00000 0x1000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <18>;
-			dma-names = "rx", "tx";
-			dmas = <&pdma1 14>, <&pdma1 15>;
-			clock-names = "iis", "i2s_opclk0";
-			clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s2_bus>;
-			#sound-dai-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm: pwm@e2500000 {
-			compatible = "samsung,s5pc100-pwm";
-			reg = <0xe2500000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <21>, <22>, <23>, <24>, <25>;
-			clock-names = "timers";
-			clocks = <&clocks CLK_PWM>;
-			#pwm-cells = <3>;
-		};
-
-		watchdog: watchdog@e2700000 {
-			compatible = "samsung,s3c2410-wdt";
-			reg = <0xe2700000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <26>;
-			clock-names = "watchdog";
-			clocks = <&clocks CLK_WDT>;
-		};
-
-		rtc: rtc@e2800000 {
-			compatible = "samsung,s3c6410-rtc";
-			reg = <0xe2800000 0x100>;
-			interrupt-parent = <&vic0>;
-			interrupts = <28>, <29>;
-			clocks = <&clocks CLK_RTC>;
-			clock-names = "rtc";
-			status = "disabled";
-		};
-
-		uart0: serial@e2900000 {
-			compatible = "samsung,s5pv210-uart";
-			reg = <0xe2900000 0x400>;
-			interrupt-parent = <&vic1>;
-			interrupts = <10>;
-			clock-names = "uart", "clk_uart_baud0",
-					"clk_uart_baud1";
-			clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>,
-					<&clocks SCLK_UART0>;
-			status = "disabled";
-		};
-
-		uart1: serial@e2900400 {
-			compatible = "samsung,s5pv210-uart";
-			reg = <0xe2900400 0x400>;
-			interrupt-parent = <&vic1>;
-			interrupts = <11>;
-			clock-names = "uart", "clk_uart_baud0",
-					"clk_uart_baud1";
-			clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>,
-					<&clocks SCLK_UART1>;
-			status = "disabled";
-		};
-
-		uart2: serial@e2900800 {
-			compatible = "samsung,s5pv210-uart";
-			reg = <0xe2900800 0x400>;
-			interrupt-parent = <&vic1>;
-			interrupts = <12>;
-			clock-names = "uart", "clk_uart_baud0",
-					"clk_uart_baud1";
-			clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>,
-					<&clocks SCLK_UART2>;
-			status = "disabled";
-		};
-
-		uart3: serial@e2900c00 {
-			compatible = "samsung,s5pv210-uart";
-			reg = <0xe2900c00 0x400>;
-			interrupt-parent = <&vic1>;
-			interrupts = <13>;
-			clock-names = "uart", "clk_uart_baud0",
-					"clk_uart_baud1";
-			clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>,
-					<&clocks SCLK_UART3>;
-			status = "disabled";
-		};
-
-		sdhci0: sdhci@eb000000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0xeb000000 0x100000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <26>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>,
-					<&clocks SCLK_MMC0>;
-			status = "disabled";
-		};
-
-		sdhci1: sdhci@eb100000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0xeb100000 0x100000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <27>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>,
-					<&clocks SCLK_MMC1>;
-			status = "disabled";
-		};
-
-		sdhci2: sdhci@eb200000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0xeb200000 0x100000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <28>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
-			clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>,
-					<&clocks SCLK_MMC2>;
-			status = "disabled";
-		};
-
-		sdhci3: sdhci@eb300000 {
-			compatible = "samsung,s3c6410-sdhci";
-			reg = <0xeb300000 0x100000>;
-			interrupt-parent = <&vic3>;
-			interrupts = <2>;
-			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3";
-			clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>,
-					<&clocks SCLK_MMC3>;
-			status = "disabled";
-		};
-
-		hsotg: hsotg@ec000000 {
-			compatible = "samsung,s3c6400-hsotg";
-			reg = <0xec000000 0x20000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <24>;
-			clocks = <&clocks CLK_USB_OTG>;
-			clock-names = "otg";
-			phy-names = "usb2-phy";
-			phys = <&usbphy 0>;
-			status = "disabled";
-		};
-
-		usbphy: usbphy@ec100000 {
-			compatible = "samsung,s5pv210-usb2-phy";
-			reg = <0xec100000 0x100>;
-			samsung,pmureg-phandle = <&pmu_syscon>;
-			clocks = <&clocks CLK_USB_OTG>, <&xusbxti>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		ehci: ehci@ec200000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0xec200000 0x100>;
-			interrupts = <23>;
-			interrupt-parent = <&vic1>;
-			clocks = <&clocks CLK_USB_HOST>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			port@0 {
-				reg = <0>;
-				phys = <&usbphy 1>;
-			};
-		};
-
-		ohci: ohci@ec300000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0xec300000 0x100>;
-			interrupts = <23>;
-			clocks = <&clocks CLK_USB_HOST>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			port@0 {
-				reg = <0>;
-				phys = <&usbphy 1>;
-			};
-		};
-
-		mfc: codec@f1700000 {
-			compatible = "samsung,mfc-v5";
-			reg = <0xf1700000 0x10000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <14>;
-			clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>;
-			clock-names = "sclk_mfc", "mfc";
-		};
-
-		vic0: interrupt-controller@f2000000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0xf2000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@f2100000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0xf2100000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic2: interrupt-controller@f2200000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0xf2200000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic3: interrupt-controller@f2300000 {
-			compatible = "arm,pl192-vic";
-			interrupt-controller;
-			reg = <0xf2300000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		fimd: fimd@f8000000 {
-			compatible = "samsung,exynos4210-fimd";
-			interrupt-parent = <&vic2>;
-			reg = <0xf8000000 0x20000>;
-			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <0>, <1>, <2>;
-			clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>;
-			clock-names = "sclk_fimd", "fimd";
-			status = "disabled";
-		};
-
-		g2d: g2d@fa000000 {
-			compatible = "samsung,s5pv210-g2d";
-			reg = <0xfa000000 0x1000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <9>;
-			clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>;
-			clock-names = "sclk_fimg2d", "fimg2d";
-		};
-
-		mdma1: mdma@fa200000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0xfa200000 0x1000>;
-			interrupt-parent = <&vic0>;
-			interrupts = <18>;
-			clocks = <&clocks CLK_MDMA>;
-			clock-names = "apb_pclk";
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
-		};
-
-		i2c1: i2c@fab00000 {
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0xfab00000 0x1000>;
-			interrupt-parent = <&vic2>;
-			interrupts = <13>;
-			clocks = <&clocks CLK_I2C1>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_bus>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		camera: camera {
-			compatible = "samsung,fimc", "simple-bus";
-			pinctrl-names = "default";
-			pinctrl-0 = <>;
-			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
-			clock-names = "sclk_cam0", "sclk_cam1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clock_cam: clock-controller {
-				#clock-cells = <1>;
-			};
-
-			csis0: csis@fa600000 {
-				compatible = "samsung,s5pv210-csis";
-				reg = <0xfa600000 0x4000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <29>;
-				clocks = <&clocks CLK_CSIS>,
-						<&clocks SCLK_CSIS>;
-				clock-names = "clk_csis",
-						"sclk_csis";
-				bus-width = <4>;
-				status = "disabled";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			fimc0: fimc@fb200000 {
-				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb200000 0x1000>;
-				interrupts = <5>;
-				interrupt-parent = <&vic2>;
-				clocks = <&clocks CLK_FIMC0>,
-						<&clocks SCLK_FIMC0>;
-				clock-names = "fimc",
-						"sclk_fimc";
-				samsung,pix-limits = <4224 8192 1920 4224>;
-				samsung,mainscaler-ext;
-				samsung,cam-if;
-			};
-
-			fimc1: fimc@fb300000 {
-				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb300000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <6>;
-				clocks = <&clocks CLK_FIMC1>,
-						<&clocks SCLK_FIMC1>;
-				clock-names = "fimc",
-						"sclk_fimc";
-				samsung,pix-limits = <4224 8192 1920 4224>;
-				samsung,mainscaler-ext;
-				samsung,cam-if;
-			};
-
-			fimc2: fimc@fb400000 {
-				compatible = "samsung,s5pv210-fimc";
-				reg = <0xfb400000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <7>;
-				clocks = <&clocks CLK_FIMC2>,
-						<&clocks SCLK_FIMC2>;
-				clock-names = "fimc",
-						"sclk_fimc";
-				samsung,pix-limits = <4224 8192 1920 4224>;
-				samsung,mainscaler-ext;
-				samsung,lcd-wb;
-			};
-		};
-	};
-};
-
-#include "s5pv210-pinctrl.dtsi"
diff --git a/src/arm/samsung_k3pe0e000b.dtsi b/src/arm/samsung_k3pe0e000b.dtsi
deleted file mode 100644
index 9657a5cbc3ad..000000000000
--- a/src/arm/samsung_k3pe0e000b.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Timings and Geometry for Samsung K3PE0E000B memory part
- */
-
-/ {
-	samsung_K3PE0E000B: lpddr2 {
-		compatible	= "Samsung,K3PE0E000B","jedec,lpddr2-s4";
-		density		= <4096>;
-		io-width	= <32>;
-
-		tRPab-min-tck	= <3>;
-		tRCD-min-tck	= <3>;
-		tWR-min-tck	= <3>;
-		tRASmin-min-tck	= <3>;
-		tRRD-min-tck	= <2>;
-		tWTR-min-tck	= <2>;
-		tXP-min-tck	= <2>;
-		tRTP-min-tck	= <2>;
-		tCKE-min-tck	= <3>;
-		tCKESR-min-tck	= <3>;
-		tFAW-min-tck	= <8>;
-
-		timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 {
-			compatible	= "jedec,lpddr2-timings";
-			min-freq	= <10000000>;
-			max-freq	= <533333333>;
-			tRPab		= <21000>;
-			tRCD		= <18000>;
-			tWR		= <15000>;
-			tRAS-min	= <42000>;
-			tRRD		= <10000>;
-			tWTR		= <7500>;
-			tXP		= <7500>;
-			tRTP		= <7500>;
-			tCKESR		= <15000>;
-			tDQSCK-max	= <5500>;
-			tFAW		= <50000>;
-			tZQCS		= <90000>;
-			tZQCL		= <360000>;
-			tZQinit		= <1000000>;
-			tRAS-max-ns	= <70000>;
-			tDQSCK-max-derated = <6000>;
-		};
-
-		timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 {
-			compatible	= "jedec,lpddr2-timings";
-			min-freq	= <10000000>;
-			max-freq	= <266666666>;
-			tRPab		= <21000>;
-			tRCD		= <18000>;
-			tWR		= <15000>;
-			tRAS-min	= <42000>;
-			tRRD		= <10000>;
-			tWTR		= <7500>;
-			tXP		= <7500>;
-			tRTP		= <7500>;
-			tCKESR		= <15000>;
-			tDQSCK-max	= <5500>;
-			tFAW		= <50000>;
-			tZQCS		= <90000>;
-			tZQCL		= <360000>;
-			tZQinit		= <1000000>;
-			tRAS-max-ns	= <70000>;
-			tDQSCK-max-derated = <6000>;
-		};
-	};
-};
diff --git a/src/arm/sh7372-mackerel.dts b/src/arm/sh7372-mackerel.dts
deleted file mode 100644
index a759a276c9a9..000000000000
--- a/src/arm/sh7372-mackerel.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Device Tree Source for the mackerel board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh7372.dtsi"
-
-/ {
-	model = "Mackerel (AP4 EVM 2nd)";
-	compatible = "renesas,mackerel";
-
-	chosen {
-		bootargs = "console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp mem=240m rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x10000000>;
-	};
-};
diff --git a/src/arm/sh7372.dtsi b/src/arm/sh7372.dtsi
deleted file mode 100644
index 249f65be2a50..000000000000
--- a/src/arm/sh7372.dtsi
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Device Tree Source for the sh7372 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "renesas,sh7372";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0x0>;
-		};
-	};
-
-	pfc: pfc@e6050000 {
-		compatible = "renesas,pfc-sh7372";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605801c 0x1c>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
diff --git a/src/arm/sh73a0-kzm9g-reference.dts b/src/arm/sh73a0-kzm9g-reference.dts
deleted file mode 100644
index 18662aec2ec4..000000000000
--- a/src/arm/sh73a0-kzm9g-reference.dts
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * Device Tree Source for the KZM-A9-GT board
- *
- * Copyright (C) 2012 Horms Solutions Ltd.
- *
- * Based on sh73a0-kzm9g.dts
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh73a0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "KZM-A9-GT";
-	compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
-
-	aliases {
-		serial4 = &scifa4;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd_dvfs>;
-			operating-points = <
-				/* kHz  uV */
-				1196000 1315000
-				 598000 1175000
-				 398667 1065000
-			>;
-			voltage-tolerance = <1>; /* 1% */
-		};
-	};
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x41000000 0x1e800000>;
-	};
-
-	reg_1p8v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vmmc_sdhi0: regulator@2 {
-	        compatible = "regulator-fixed";
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vmmc_sdhi2: regulator@3 {
-	        compatible = "regulator-fixed";
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	lan9220@10000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x10000000 0x100>;
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		smsc,irq-push-pull;
-		smsc,save-mac-address;
-		vddvario-supply = <&reg_1p8v>;
-		vdd33a-supply = <&reg_3p3v>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
-		};
-		led2 {
-			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
-		};
-		led3 {
-			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
-		};
-		led4 {
-			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		back-key {
-			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "SW3";
-		};
-
-		right-key {
-			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RIGHT>;
-			label = "SW2-R";
-		};
-
-		left-key {
-			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LEFT>;
-			label = "SW2-L";
-		};
-
-		enter-key {
-			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_ENTER>;
-			label = "SW2-P";
-		};
-
-		up-key {
-			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_UP>;
-			label = "SW2-U";
-		};
-
-		down-key {
-			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DOWN>;
-			label = "SW2-D";
-		};
-
-		home-key {
-			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "SW1";
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "left_j";
-		simple-audio-card,cpu {
-			sound-dai = <&sh_fsi2 0>;
-		};
-		simple-audio-card,codec {
-			sound-dai = <&ak4648>;
-			bitclock-master;
-			frame-master;
-			system-clock-frequency = <11289600>;
-		};
-	};
-};
-
-&i2c0 {
-	status = "okay";
-	as3711@40 {
-		compatible = "ams,as3711";
-		reg = <0x40>;
-
-		regulators {
-			vdd_dvfs: sd1 {
-				regulator-name = "1.315V CPU";
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			sd2 {
-				regulator-name = "1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			sd4 {
-				regulator-name = "1.215V";
-				regulator-min-microvolt = <1215000>;
-				regulator-max-microvolt = <1235000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo2 {
-				regulator-name = "2.8V CPU";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo3 {
-				regulator-name = "3.0V CPU";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo4 {
-				regulator-name = "2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo5 {
-				regulator-name = "2.8V #2";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo7 {
-				regulator-name = "1.15V CPU";
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo8 {
-				regulator-name = "1.15V CPU #2";
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-
-	ak4648: ak4648@0x12 {
-		#sound-dai-cells = <0>;
-		compatible = "asahi-kasei,ak4648";
-		reg = <0x12>;
-	};
-};
-
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	pcf8575: gpio@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		interrupt-parent = <&irqpin2>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&mmcif {
-	pinctrl-0 = <&mmcif_pins>;
-	pinctrl-names = "default";
-
-	bus-width = <8>;
-	vmmc-supply = <&reg_1p8v>;
-	status = "okay";
-};
-
-&pfc {
-	i2c3_pins: i2c3 {
-		renesas,groups = "i2c3_1";
-		renesas,function = "i2c3";
-	};
-
-	mmcif_pins: mmc {
-		mux {
-			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
-			renesas,function = "mmc0";
-		};
-		cfg {
-			renesas,groups = "mmc0_data8_0";
-			renesas,pins = "PORT279";
-			bias-pull-up;
-		};
-	};
-
-	scifa4_pins: serial4 {
-		renesas,groups = "scifa4_data", "scifa4_ctrl";
-		renesas,function = "scifa4";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	fsia_pins: sounda {
-		renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
-				 "fsia_data_in", "fsia_data_out";
-		renesas,function = "fsia";
-	};
-};
-
-&scifa4 {
-	pinctrl-0 = <&scifa4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vmmc_sdhi0>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vmmc_sdhi2>;
-	bus-width = <4>;
-	broken-cd;
-	status = "okay";
-};
-
-&sh_fsi2 {
-	pinctrl-0 = <&fsia_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/src/arm/sh73a0-kzm9g.dts b/src/arm/sh73a0-kzm9g.dts
deleted file mode 100644
index 27c5f426d172..000000000000
--- a/src/arm/sh73a0-kzm9g.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Device Tree Source for the KZM-A9-GT board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh73a0.dtsi"
-
-/ {
-	model = "KZM-A9-GT";
-	compatible = "renesas,kzm9g", "renesas,sh73a0";
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x41000000 0x1e800000>;
-	};
-};
diff --git a/src/arm/sh73a0.dtsi b/src/arm/sh73a0.dtsi
deleted file mode 100644
index 910b79079d5a..000000000000
--- a/src/arm/sh73a0.dtsi
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * Device Tree Source for the SH73A0 SoC
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "renesas,sh73a0";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@f0001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xf0001000 0x1000>,
-		      <0xf0000100 0x100>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 56 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	irqpin0: irqpin@e6900000 {
-		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900000 4>,
-			<0xe6900010 4>,
-			<0xe6900020 1>,
-			<0xe6900040 1>,
-			<0xe6900060 1>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
-			      0 2 IRQ_TYPE_LEVEL_HIGH
-			      0 3 IRQ_TYPE_LEVEL_HIGH
-			      0 4 IRQ_TYPE_LEVEL_HIGH
-			      0 5 IRQ_TYPE_LEVEL_HIGH
-			      0 6 IRQ_TYPE_LEVEL_HIGH
-			      0 7 IRQ_TYPE_LEVEL_HIGH
-			      0 8 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	irqpin1: irqpin@e6900004 {
-		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900004 4>,
-			<0xe6900014 4>,
-			<0xe6900024 1>,
-			<0xe6900044 1>,
-			<0xe6900064 1>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
-			      0 10 IRQ_TYPE_LEVEL_HIGH
-			      0 11 IRQ_TYPE_LEVEL_HIGH
-			      0 12 IRQ_TYPE_LEVEL_HIGH
-			      0 13 IRQ_TYPE_LEVEL_HIGH
-			      0 14 IRQ_TYPE_LEVEL_HIGH
-			      0 15 IRQ_TYPE_LEVEL_HIGH
-			      0 16 IRQ_TYPE_LEVEL_HIGH>;
-		control-parent;
-	};
-
-	irqpin2: irqpin@e6900008 {
-		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe6900008 4>,
-			<0xe6900018 4>,
-			<0xe6900028 1>,
-			<0xe6900048 1>,
-			<0xe6900068 1>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
-			      0 18 IRQ_TYPE_LEVEL_HIGH
-			      0 19 IRQ_TYPE_LEVEL_HIGH
-			      0 20 IRQ_TYPE_LEVEL_HIGH
-			      0 21 IRQ_TYPE_LEVEL_HIGH
-			      0 22 IRQ_TYPE_LEVEL_HIGH
-			      0 23 IRQ_TYPE_LEVEL_HIGH
-			      0 24 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	irqpin3: irqpin@e690000c {
-		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xe690000c 4>,
-			<0xe690001c 4>,
-			<0xe690002c 1>,
-			<0xe690004c 1>,
-			<0xe690006c 1>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
-			      0 26 IRQ_TYPE_LEVEL_HIGH
-			      0 27 IRQ_TYPE_LEVEL_HIGH
-			      0 28 IRQ_TYPE_LEVEL_HIGH
-			      0 29 IRQ_TYPE_LEVEL_HIGH
-			      0 30 IRQ_TYPE_LEVEL_HIGH
-			      0 31 IRQ_TYPE_LEVEL_HIGH
-			      0 32 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	i2c0: i2c@e6820000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0xe6820000 0x425>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
-			      0 168 IRQ_TYPE_LEVEL_HIGH
-			      0 169 IRQ_TYPE_LEVEL_HIGH
-			      0 170 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c1: i2c@e6822000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0xe6822000 0x425>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
-			      0 52 IRQ_TYPE_LEVEL_HIGH
-			      0 53 IRQ_TYPE_LEVEL_HIGH
-			      0 54 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c2: i2c@e6824000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0xe6824000 0x425>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
-			      0 172 IRQ_TYPE_LEVEL_HIGH
-			      0 173 IRQ_TYPE_LEVEL_HIGH
-			      0 174 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c3: i2c@e6826000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0xe6826000 0x425>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
-			      0 184 IRQ_TYPE_LEVEL_HIGH
-			      0 185 IRQ_TYPE_LEVEL_HIGH
-			      0 186 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	i2c4: i2c@e6828000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "renesas,rmobile-iic";
-		reg = <0xe6828000 0x425>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
-			      0 188 IRQ_TYPE_LEVEL_HIGH
-			      0 189 IRQ_TYPE_LEVEL_HIGH
-			      0 190 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	mmcif: mmc@e6bd0000 {
-		compatible = "renesas,sh-mmcif";
-		reg = <0xe6bd0000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
-			      0 141 IRQ_TYPE_LEVEL_HIGH>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
-
-	sdhi0: sd@ee100000 {
-		compatible = "renesas,sdhi-sh73a0";
-		reg = <0xee100000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
-			      0 84 IRQ_TYPE_LEVEL_HIGH
-			      0 85 IRQ_TYPE_LEVEL_HIGH>;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
-	sdhi1: sd@ee120000 {
-		compatible = "renesas,sdhi-sh73a0";
-		reg = <0xee120000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
-			      0 89 IRQ_TYPE_LEVEL_HIGH>;
-		toshiba,mmc-wrprotect-disable;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	sdhi2: sd@ee140000 {
-		compatible = "renesas,sdhi-sh73a0";
-		reg = <0xee140000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
-			      0 105 IRQ_TYPE_LEVEL_HIGH>;
-		toshiba,mmc-wrprotect-disable;
-		cap-sd-highspeed;
-		status = "disabled";
-	};
-
-	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c40000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c50000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c60000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c70000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa4: serial@e6c80000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6c80000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa5: serial@e6cb0000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6cb0000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa6: serial@e6cc0000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6cc0000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifa7: serial@e6cd0000 {
-		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
-		reg = <0xe6cd0000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	scifb8: serial@e6c30000 {
-		compatible = "renesas,scifb-sh73a0", "renesas,scifb";
-		reg = <0xe6c30000 0x100>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	pfc: pfc@e6050000 {
-		compatible = "renesas,pfc-sh73a0";
-		reg = <0xe6050000 0x8000>,
-		      <0xe605801c 0x1c>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupts-extended =
-			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
-			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
-			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
-			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
-			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
-			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
-			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
-			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
-	};
-
-	sh_fsi2: sound@ec230000 {
-		#sound-dai-cells = <1>;
-		compatible = "renesas,sh_fsi2";
-		reg = <0xec230000 0x400>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 146 0x4>;
-		status = "disabled";
-	};
-};
diff --git a/src/arm/socfpga.dtsi b/src/arm/socfpga.dtsi
deleted file mode 100644
index 4d77ad690ed5..000000000000
--- a/src/arm/socfpga.dtsi
+++ /dev/null
@@ -1,744 +0,0 @@
-/*
- *  Copyright (C) 2012 Altera <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/reset/altr,rst-mgr.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac1;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		timer0 = &timer0;
-		timer1 = &timer1;
-		timer2 = &timer2;
-		timer3 = &timer3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	intc: intc@fffed000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xfffed000 0x1000>,
-		      <0xfffec100 0x100>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		device_type = "soc";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		amba {
-			compatible = "arm,amba-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma: pdma@ffe01000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xffe01000 0x1000>;
-				interrupts = <0 104 4>,
-					     <0 105 4>,
-					     <0 106 4>,
-					     <0 107 4>,
-					     <0 108 4>,
-					     <0 109 4>,
-					     <0 110 4>,
-					     <0 111 4>;
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-				clocks = <&l4_main_clk>;
-				clock-names = "apb_pclk";
-			};
-		};
-
-		can0: can@ffc00000 {
-			compatible = "bosch,d_can";
-			reg = <0xffc00000 0x1000>;
-			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
-			clocks = <&can0_clk>;
-			status = "disabled";
-		};
-
-		can1: can@ffc01000 {
-			compatible = "bosch,d_can";
-			reg = <0xffc01000 0x1000>;
-			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
-			clocks = <&can1_clk>;
-			status = "disabled";
-		};
-
-		clkmgr@ffd04000 {
-				compatible = "altr,clk-mgr";
-				reg = <0xffd04000 0x1000>;
-
-				clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					osc1: osc1 {
-						#clock-cells = <0>;
-						compatible = "fixed-clock";
-					};
-
-					osc2: osc2 {
-						#clock-cells = <0>;
-						compatible = "fixed-clock";
-					};
-
-					f2s_periph_ref_clk: f2s_periph_ref_clk {
-						#clock-cells = <0>;
-						compatible = "fixed-clock";
-					};
-
-					f2s_sdram_ref_clk: f2s_sdram_ref_clk {
-						#clock-cells = <0>;
-						compatible = "fixed-clock";
-					};
-
-					main_pll: main_pll {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc1>;
-						reg = <0x40>;
-
-						mpuclk: mpuclk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							div-reg = <0xe0 0 9>;
-							reg = <0x48>;
-						};
-
-						mainclk: mainclk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							div-reg = <0xe4 0 9>;
-							reg = <0x4C>;
-						};
-
-						dbg_base_clk: dbg_base_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							div-reg = <0xe8 0 9>;
-							reg = <0x50>;
-						};
-
-						main_qspi_clk: main_qspi_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							reg = <0x54>;
-						};
-
-						main_nand_sdmmc_clk: main_nand_sdmmc_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							reg = <0x58>;
-						};
-
-						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&main_pll>;
-							reg = <0x5C>;
-						};
-					};
-
-					periph_pll: periph_pll {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
-						reg = <0x80>;
-
-						emac0_clk: emac0_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x88>;
-						};
-
-						emac1_clk: emac1_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x8C>;
-						};
-
-						per_qspi_clk: per_qsi_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x90>;
-						};
-
-						per_nand_mmc_clk: per_nand_mmc_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x94>;
-						};
-
-						per_base_clk: per_base_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x98>;
-						};
-
-						h2f_usr1_clk: h2f_usr1_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&periph_pll>;
-							reg = <0x9C>;
-						};
-					};
-
-					sdram_pll: sdram_pll {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
-						reg = <0xC0>;
-
-						ddr_dqs_clk: ddr_dqs_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&sdram_pll>;
-							reg = <0xC8>;
-						};
-
-						ddr_2x_dqs_clk: ddr_2x_dqs_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&sdram_pll>;
-							reg = <0xCC>;
-						};
-
-						ddr_dq_clk: ddr_dq_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&sdram_pll>;
-							reg = <0xD0>;
-						};
-
-						h2f_usr2_clk: h2f_usr2_clk {
-							#clock-cells = <0>;
-							compatible = "altr,socfpga-perip-clk";
-							clocks = <&sdram_pll>;
-							reg = <0xD4>;
-						};
-					};
-
-					mpu_periph_clk: mpu_periph_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-perip-clk";
-						clocks = <&mpuclk>;
-						fixed-divider = <4>;
-					};
-
-					mpu_l2_ram_clk: mpu_l2_ram_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-perip-clk";
-						clocks = <&mpuclk>;
-						fixed-divider = <2>;
-					};
-
-					l4_main_clk: l4_main_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>;
-						clk-gate = <0x60 0>;
-					};
-
-					l3_main_clk: l3_main_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-perip-clk";
-						clocks = <&mainclk>;
-						fixed-divider = <1>;
-					};
-
-					l3_mp_clk: l3_mp_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>;
-						div-reg = <0x64 0 2>;
-						clk-gate = <0x60 1>;
-					};
-
-					l3_sp_clk: l3_sp_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>;
-						div-reg = <0x64 2 2>;
-					};
-
-					l4_mp_clk: l4_mp_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>, <&per_base_clk>;
-						div-reg = <0x64 4 3>;
-						clk-gate = <0x60 2>;
-					};
-
-					l4_sp_clk: l4_sp_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&mainclk>, <&per_base_clk>;
-						div-reg = <0x64 7 3>;
-						clk-gate = <0x60 3>;
-					};
-
-					dbg_at_clk: dbg_at_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
-						div-reg = <0x68 0 2>;
-						clk-gate = <0x60 4>;
-					};
-
-					dbg_clk: dbg_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
-						div-reg = <0x68 2 2>;
-						clk-gate = <0x60 5>;
-					};
-
-					dbg_trace_clk: dbg_trace_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
-						div-reg = <0x6C 0 3>;
-						clk-gate = <0x60 6>;
-					};
-
-					dbg_timer_clk: dbg_timer_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&dbg_base_clk>;
-						clk-gate = <0x60 7>;
-					};
-
-					cfg_clk: cfg_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&cfg_h2f_usr0_clk>;
-						clk-gate = <0x60 8>;
-					};
-
-					h2f_user0_clk: h2f_user0_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&cfg_h2f_usr0_clk>;
-						clk-gate = <0x60 9>;
-					};
-
-					emac_0_clk: emac_0_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&emac0_clk>;
-						clk-gate = <0xa0 0>;
-					};
-
-					emac_1_clk: emac_1_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&emac1_clk>;
-						clk-gate = <0xa0 1>;
-					};
-
-					usb_mp_clk: usb_mp_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&per_base_clk>;
-						clk-gate = <0xa0 2>;
-						div-reg = <0xa4 0 3>;
-					};
-
-					spi_m_clk: spi_m_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&per_base_clk>;
-						clk-gate = <0xa0 3>;
-						div-reg = <0xa4 3 3>;
-					};
-
-					can0_clk: can0_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&per_base_clk>;
-						clk-gate = <0xa0 4>;
-						div-reg = <0xa4 6 3>;
-					};
-
-					can1_clk: can1_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&per_base_clk>;
-						clk-gate = <0xa0 5>;
-						div-reg = <0xa4 9 3>;
-					};
-
-					gpio_db_clk: gpio_db_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&per_base_clk>;
-						clk-gate = <0xa0 6>;
-						div-reg = <0xa8 0 24>;
-					};
-
-					h2f_user1_clk: h2f_user1_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&h2f_usr1_clk>;
-						clk-gate = <0xa0 7>;
-					};
-
-					sdmmc_clk: sdmmc_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-						clk-gate = <0xa0 8>;
-						clk-phase = <0 135>;
-					};
-
-					nand_x_clk: nand_x_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-						clk-gate = <0xa0 9>;
-					};
-
-					nand_clk: nand_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
-						clk-gate = <0xa0 10>;
-						fixed-divider = <4>;
-					};
-
-					qspi_clk: qspi_clk {
-						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
-						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
-						clk-gate = <0xa0 11>;
-					};
-				};
-			};
-
-		gmac0: ethernet@ff700000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
-			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
-			reg = <0xff700000 0x2000>;
-			interrupts = <0 115 4>;
-			interrupt-names = "macirq";
-			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-			clocks = <&emac0_clk>;
-			clock-names = "stmmaceth";
-			resets = <&rst EMAC0_RESET>;
-			reset-names = "stmmaceth";
-			snps,multicast-filter-bins = <256>;
-			snps,perfect-filter-entries = <128>;
-			status = "disabled";
-		};
-
-		gmac1: ethernet@ff702000 {
-			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
-			altr,sysmgr-syscon = <&sysmgr 0x60 2>;
-			reg = <0xff702000 0x2000>;
-			interrupts = <0 120 4>;
-			interrupt-names = "macirq";
-			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-			clocks = <&emac1_clk>;
-			clock-names = "stmmaceth";
-			resets = <&rst EMAC1_RESET>;
-			reset-names = "stmmaceth";
-			snps,multicast-filter-bins = <256>;
-			snps,perfect-filter-entries = <128>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@ffc04000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc04000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 158 0x4>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@ffc05000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc05000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 159 0x4>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@ffc06000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc06000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 160 0x4>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@ffc07000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc07000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 161 0x4>;
-			status = "disabled";
-		};
-
-		gpio@ff708000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,dw-apb-gpio";
-			reg = <0xff708000 0x1000>;
-			clocks = <&per_base_clk>;
-			status = "disabled";
-
-			gpio0: gpio-controller@0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <29>;
-				reg = <0>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <0 164 4>;
-			};
-		};
-
-		gpio@ff709000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,dw-apb-gpio";
-			reg = <0xff709000 0x1000>;
-			clocks = <&per_base_clk>;
-			status = "disabled";
-
-			gpio1: gpio-controller@0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <29>;
-				reg = <0>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <0 165 4>;
-			};
-		};
-
-		gpio@ff70a000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,dw-apb-gpio";
-			reg = <0xff70a000 0x1000>;
-			clocks = <&per_base_clk>;
-			status = "disabled";
-
-			gpio2: gpio-controller@0 {
-				compatible = "snps,dw-apb-gpio-port";
-				gpio-controller;
-				#gpio-cells = <2>;
-				snps,nr-gpios = <27>;
-				reg = <0>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <0 166 4>;
-			};
-		};
-
-		L2: l2-cache@fffef000 {
-			compatible = "arm,pl310-cache";
-			reg = <0xfffef000 0x1000>;
-			interrupts = <0 38 0x04>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <1 1 1>;
-			arm,data-latency = <2 1 1>;
-		};
-
-		mmc: dwmmc0@ff704000 {
-			compatible = "altr,socfpga-dw-mshc";
-			reg = <0xff704000 0x1000>;
-			interrupts = <0 139 4>;
-			fifo-depth = <0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
-			clock-names = "biu", "ciu";
-		};
-
-		/* Local timer */
-		timer@fffec600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xfffec600 0x100>;
-			interrupts = <1 13 0xf04>;
-			clocks = <&mpu_periph_clk>;
-		};
-
-		timer0: timer0@ffc08000 {
-			compatible = "snps,dw-apb-timer";
-			interrupts = <0 167 4>;
-			reg = <0xffc08000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			clock-names = "timer";
-		};
-
-		timer1: timer1@ffc09000 {
-			compatible = "snps,dw-apb-timer";
-			interrupts = <0 168 4>;
-			reg = <0xffc09000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			clock-names = "timer";
-		};
-
-		timer2: timer2@ffd00000 {
-			compatible = "snps,dw-apb-timer";
-			interrupts = <0 169 4>;
-			reg = <0xffd00000 0x1000>;
-			clocks = <&osc1>;
-			clock-names = "timer";
-		};
-
-		timer3: timer3@ffd01000 {
-			compatible = "snps,dw-apb-timer";
-			interrupts = <0 170 4>;
-			reg = <0xffd01000 0x1000>;
-			clocks = <&osc1>;
-			clock-names = "timer";
-		};
-
-		uart0: serial0@ffc02000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0xffc02000 0x1000>;
-			interrupts = <0 162 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&l4_sp_clk>;
-		};
-
-		uart1: serial1@ffc03000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0xffc03000 0x1000>;
-			interrupts = <0 163 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&l4_sp_clk>;
-		};
-
-		rst: rstmgr@ffd05000 {
-			#reset-cells = <1>;
-			compatible = "altr,rst-mgr";
-			reg = <0xffd05000 0x1000>;
-		};
-
-		usbphy0: usbphy@0 {
-			#phy-cells = <0>;
-			compatible = "usb-nop-xceiv";
-			status = "okay";
-		};
-
-		usb0: usb@ffb00000 {
-			compatible = "snps,dwc2";
-			reg = <0xffb00000 0xffff>;
-			interrupts = <0 125 4>;
-			clocks = <&usb_mp_clk>;
-			clock-names = "otg";
-			phys = <&usbphy0>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		usb1: usb@ffb40000 {
-			compatible = "snps,dwc2";
-			reg = <0xffb40000 0xffff>;
-			interrupts = <0 128 4>;
-			clocks = <&usb_mp_clk>;
-			clock-names = "otg";
-			phys = <&usbphy0>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		watchdog0: watchdog@ffd02000 {
-			compatible = "snps,dw-wdt";
-			reg = <0xffd02000 0x1000>;
-			interrupts = <0 171 4>;
-			clocks = <&osc1>;
-			status = "disabled";
-		};
-
-		watchdog1: watchdog@ffd03000 {
-			compatible = "snps,dw-wdt";
-			reg = <0xffd03000 0x1000>;
-			interrupts = <0 172 4>;
-			clocks = <&osc1>;
-			status = "disabled";
-		};
-
-		sysmgr: sysmgr@ffd08000 {
-			compatible = "altr,sys-mgr", "syscon";
-			reg = <0xffd08000 0x4000>;
-		};
-	};
-};
diff --git a/src/arm/socfpga_arria5.dtsi b/src/arm/socfpga_arria5.dtsi
deleted file mode 100644
index 12d1c2ccaf5b..000000000000
--- a/src/arm/socfpga_arria5.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-#include "socfpga.dtsi"
-
-/ {
-	soc {
-		clkmgr@ffd04000 {
-			clocks {
-				osc1 {
-					clock-frequency = <25000000>;
-				};
-			};
-		};
-
-		dwmmc0@ff704000 {
-			num-slots = <1>;
-			supports-highspeed;
-			broken-cd;
-
-			slot@0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
-		};
-
-		sysmgr@ffd08000 {
-			cpu1-start-addr = <0xffd080c4>;
-		};
-	};
-};
diff --git a/src/arm/socfpga_arria5_socdk.dts b/src/arm/socfpga_arria5_socdk.dts
deleted file mode 100644
index d532d171e391..000000000000
--- a/src/arm/socfpga_arria5_socdk.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "socfpga_arria5.dtsi"
-
-/ {
-	model = "Altera SOCFPGA Arria V SoC Development Kit";
-	compatible = "altr,socfpga-arria5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		* to be added to the gmac1 device tree blob.
-		*/
-		ethernet0 = &gmac1;
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		 * to be added to the gmac1 device tree blob.
-		 */
-		ethernet0 = &gmac1;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <2600>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <2000>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c32";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&usb1 {
-	status = "okay";
-};
diff --git a/src/arm/socfpga_cyclone5.dtsi b/src/arm/socfpga_cyclone5.dtsi
deleted file mode 100644
index bf511828729f..000000000000
--- a/src/arm/socfpga_cyclone5.dtsi
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-#include "socfpga.dtsi"
-
-/ {
-	soc {
-		clkmgr@ffd04000 {
-			clocks {
-				osc1 {
-					clock-frequency = <25000000>;
-				};
-			};
-		};
-
-		dwmmc0@ff704000 {
-			num-slots = <1>;
-			supports-highspeed;
-			broken-cd;
-
-			slot@0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
-		};
-
-		ethernet@ff702000 {
-			phy-mode = "rgmii";
-			phy-addr = <0xffffffff>; /* probe for phy addr */
-			status = "okay";
-		};
-
-		sysmgr@ffd08000 {
-			cpu1-start-addr = <0xffd080c4>;
-		};
-	};
-};
diff --git a/src/arm/socfpga_cyclone5_socdk.dts b/src/arm/socfpga_cyclone5_socdk.dts
deleted file mode 100644
index 45de1514af0a..000000000000
--- a/src/arm/socfpga_cyclone5_socdk.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "socfpga_cyclone5.dtsi"
-
-/ {
-	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		 * to be added to the gmac1 device tree blob.
-		 */
-		ethernet0 = &gmac1;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <2600>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <2000>;
-};
-
-&i2c0 {
-	status = "okay";
-
-	eeprom@51 {
-		compatible = "atmel,24c32";
-		reg = <0x51>;
-		pagesize = <32>;
-	};
-
-	rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-	};
-};
-
-&usb1 {
-	status = "okay";
-};
diff --git a/src/arm/socfpga_cyclone5_sockit.dts b/src/arm/socfpga_cyclone5_sockit.dts
deleted file mode 100644
index d26f155f5fd9..000000000000
--- a/src/arm/socfpga_cyclone5_sockit.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "socfpga_cyclone5.dtsi"
-
-/ {
-	model = "Terasic SoCkit";
-	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	aliases {
-		/* this allow the ethaddr uboot environmnet variable contents
-		 * to be added to the gmac1 device tree blob.
-		 */
-		ethernet0 = &gmac1;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-	phy-mode = "rgmii";
-
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <2600>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <2000>;
-};
-
-&usb1 {
-	status = "okay";
-};
diff --git a/src/arm/socfpga_cyclone5_socrates.dts b/src/arm/socfpga_cyclone5_socrates.dts
deleted file mode 100644
index a1814b457450..000000000000
--- a/src/arm/socfpga_cyclone5_socrates.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "socfpga_cyclone5.dtsi"
-
-/ {
-	model = "EBV SOCrates";
-	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-};
-
-&gmac1 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	rtc: rtc@68 {
-		compatible = "stm,m41t82";
-		reg = <0x68>;
-	};
-};
-
-&mmc {
-	status = "okay";
-};
diff --git a/src/arm/socfpga_vt.dts b/src/arm/socfpga_vt.dts
deleted file mode 100644
index 09792b411110..000000000000
--- a/src/arm/socfpga_vt.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/dts-v1/;
-#include "socfpga.dtsi"
-
-/ {
-	model = "Altera SOCFPGA VT";
-	compatible = "altr,socfpga-vt", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1 GB */
-	};
-
-	soc {
-		clkmgr@ffd04000 {
-			clocks {
-				osc1 {
-					clock-frequency = <10000000>;
-				};
-			};
-		};
-
-		dwmmc0@ff704000 {
-			num-slots = <1>;
-			supports-highspeed;
-			broken-cd;
-
-			slot@0 {
-				reg = <0>;
-				bus-width = <4>;
-			};
-		};
-
-		ethernet@ff700000 {
-			phy-mode = "gmii";
-			status = "okay";
-		};
-
-		timer0@ffc08000 {
-			clock-frequency = <7000000>;
-		};
-
-		timer1@ffc09000 {
-			clock-frequency = <7000000>;
-		};
-
-		timer2@ffd00000 {
-			clock-frequency = <7000000>;
-		};
-
-		timer3@ffd01000 {
-			clock-frequency = <7000000>;
-		};
-
-		serial0@ffc02000 {
-			clock-frequency = <7372800>;
-		};
-
-		serial1@ffc03000 {
-			clock-frequency = <7372800>;
-		};
-
-		sysmgr@ffd08000 {
-			cpu1-start-addr = <0xffd08010>;
-		};
-	};
-};
-
-&gmac0 {
-	status = "okay";
-	phy-mode = "gmii";
-};
diff --git a/src/arm/spear1310-evb.dts b/src/arm/spear1310-evb.dts
deleted file mode 100644
index d42c84b1df8d..000000000000
--- a/src/arm/spear1310-evb.dts
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * DTS file for SPEAr1310 Evaluation Baord
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear1310.dtsi"
-
-/ {
-	model = "ST SPEAr1310 Evaluation Board";
-	compatible = "st,spear1310-evb", "st,spear1310";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@e0700000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				i2s0 {
-					st,pins = "i2s0_grp";
-					st,function = "i2s0";
-				};
-				i2s1 {
-					st,pins = "i2s1_grp";
-					st,function = "i2s1";
-				};
-				gpio {
-					st,pins = "arm_gpio_grp";
-					st,function = "arm_gpio";
-				};
-				clcd {
-					st,pins = "clcd_grp" , "clcd_high_res";
-					st,function = "clcd";
-				};
-				eth {
-					st,pins = "gmii_grp";
-					st,function = "gmii";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp";
-					st,function = "ssp0";
-				};
-				kbd {
-					st,pins = "keyboard_6x6_grp";
-					st,function = "keyboard";
-				};
-				sdhci {
-					st,pins = "sdhci_grp";
-					st,function = "sdhci";
-				};
-				smi-pmx {
-					st,pins = "smi_2_chips_grp";
-					st,function = "smi";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				rs485 {
-					st,pins = "rs485_0_1_tdm_0_1_grp";
-					st,function = "rs485_0_1_tdm_0_1";
-				};
-				i2c1_2 {
-					st,pins = "i2c_1_2_grp";
-					st,function = "i2c_1_2";
-				};
-				smii {
-					st,pins = "smii_0_1_2_grp";
-					st,function = "smii_0_1_2";
-				};
-				nand {
-					st,pins = "nand_8bit_grp",
-						"nand_16bit_grp";
-					st,function = "nand";
-				};
-				sata {
-					st,pins = "sata0_grp";
-					st,function = "sata";
-				};
-				pcie {
-					st,pins = "pcie1_grp", "pcie2_grp";
-					st,function = "pci_express";
-				};
-			};
-		};
-
-		ahci@b1000000 {
-			status = "okay";
-		};
-
-		miphy@eb800000 {
-			status = "okay";
-		};
-
-		cf@b2800000 {
-			status = "okay";
-		};
-
-		dma@ea800000 {
-			status = "okay";
-		};
-
-		dma@eb000000 {
-			status = "okay";
-		};
-
-		fsmc: flash@b0000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "xloader";
-				reg = <0x0 0x80000>;
-			};
-			partition@80000 {
-				label = "u-boot";
-				reg = <0x80000 0x140000>;
-			};
-			partition@1C0000 {
-				label = "environment";
-				reg = <0x1C0000 0x40000>;
-			};
-			partition@200000 {
-				label = "dtb";
-				reg = <0x200000 0x40000>;
-			};
-			partition@240000 {
-				label = "linux";
-				reg = <0x240000 0xC00000>;
-			};
-			partition@E40000 {
-				label = "rootfs";
-				reg = <0xE40000 0x0>;
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			button@1 {
-				label = "wakeup";
-				linux,code = <0x100>;
-				gpios = <&gpio0 7 0x4>;
-				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
-			};
-		};
-
-		gmac0: eth@e2000000 {
-			phy-mode = "gmii";
-			status = "okay";
-		};
-
-		sdhci@b3000000 {
-			status = "okay";
-		};
-
-		smi: flash@ea000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@e6000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xe6000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		ehci@e4800000 {
-			status = "okay";
-		};
-
-		ehci@e5800000 {
-			status = "okay";
-		};
-
-		ohci@e4000000 {
-			status = "okay";
-		};
-
-		ohci@e5000000 {
-			status = "okay";
-		};
-
-		apb {
-			adc@e0080000 {
-				status = "okay";
-			};
-
-			gpio0: gpio@e0600000 {
-			       status = "okay";
-			};
-
-			gpio1: gpio@e0680000 {
-			       status = "okay";
-			};
-
-			gpio@d8400000 {
-			       status = "okay";
-			};
-
-			i2c0: i2c@e0280000 {
-			       status = "okay";
-			};
-
-			kbd@e0300000 {
-				linux,keymap = < 0x00000001
-						 0x00010002
-						 0x00020003
-						 0x00030004
-						 0x00040005
-						 0x00050006
-						 0x00060007
-						 0x00070008
-						 0x00080009
-						 0x0100000a
-						 0x0101000c
-						 0x0102000d
-						 0x0103000e
-						 0x0104000f
-						 0x01050010
-						 0x01060011
-						 0x01070012
-						 0x01080013
-						 0x02000014
-						 0x02010015
-						 0x02020016
-						 0x02030017
-						 0x02040018
-						 0x02050019
-						 0x0206001a
-						 0x0207001b
-						 0x0208001c
-						 0x0300001d
-						 0x0301001e
-						 0x0302001f
-						 0x03030020
-						 0x03040021
-						 0x03050022
-						 0x03060023
-						 0x03070024
-						 0x03080025
-						 0x04000026
-						 0x04010027
-						 0x04020028
-						 0x04030029
-						 0x0404002a
-						 0x0405002b
-						 0x0406002c
-						 0x0407002d
-						 0x0408002e
-						 0x0500002f
-						 0x05010030
-						 0x05020031
-						 0x05030032
-						 0x05040033
-						 0x05050034
-						 0x05060035
-						 0x05070036
-						 0x05080037
-						 0x06000038
-						 0x06010039
-						 0x0602003a
-						 0x0603003b
-						 0x0604003c
-						 0x0605003d
-						 0x0606003e
-						 0x0607003f
-						 0x06080040
-						 0x07000041
-						 0x07010042
-						 0x07020043
-						 0x07030044
-						 0x07040045
-						 0x07050046
-						 0x07060047
-						 0x07070048
-						 0x07080049
-						 0x0800004a
-						 0x0801004b
-						 0x0802004c
-						 0x0803004d
-						 0x0804004e
-						 0x0805004f
-						 0x08060050
-						 0x08070051
-						 0x08080052 >;
-			       autorepeat;
-			       st,mode = <0>;
-			       suspended_rate = <2000000>;
-			       status = "okay";
-			};
-
-			rtc@e0580000 {
-			       status = "okay";
-			};
-
-			serial@e0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			spi0: spi@e0100000 {
-				status = "okay";
-				num-cs = <3>;
-				cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>;
-
-				stmpe610@0 {
-					compatible = "st,stmpe610";
-					reg = <0>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					spi-max-frequency = <1000000>;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x7>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-					interrupts = <6 0x4>;
-					interrupt-parent = <&gpio1>;
-					irq-trigger = <0x2>;
-
-					stmpe_touchscreen {
-						compatible = "st,stmpe-ts";
-						ts,sample-time = <4>;
-						ts,mod-12b = <1>;
-						ts,ref-sel = <0>;
-						ts,adc-freq = <1>;
-						ts,ave-ctrl = <1>;
-						ts,touch-det-delay = <2>;
-						ts,settling = <2>;
-						ts,fraction-z = <7>;
-						ts,i-drive = <1>;
-					};
-				};
-
-				m25p80@1 {
-					compatible = "st,m25p80";
-					reg = <1>;
-					spi-max-frequency = <12000000>;
-					spi-cpol;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
-
-				spidev@2 {
-					compatible = "spidev";
-					reg = <2>;
-					spi-max-frequency = <25000000>;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
-			};
-
-			wdt@ec800620 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear1310.dtsi b/src/arm/spear1310.dtsi
deleted file mode 100644
index fa5f2bb5f106..000000000000
--- a/src/arm/spear1310.dtsi
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * DTS file for all SPEAr1310 SoCs
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "spear13xx.dtsi"
-
-/ {
-	compatible = "st,spear1310";
-
-	ahb {
-		spics: spics@e0700000{
-			compatible = "st,spear-spics-gpio";
-			reg = <0xe0700000 0x1000>;
-			st-spics,peripcfg-reg = <0x3b0>;
-			st-spics,sw-enable-bit = <12>;
-			st-spics,cs-value-bit = <11>;
-			st-spics,cs-enable-mask = <3>;
-			st-spics,cs-enable-shift = <8>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		miphy0: miphy@eb800000 {
-			compatible = "st,spear1310-miphy";
-			reg = <0xeb800000 0x4000>;
-			misc = <&misc>;
-			phy-id = <0>;
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		miphy1: miphy@eb804000 {
-			compatible = "st,spear1310-miphy";
-			reg = <0xeb804000 0x4000>;
-			misc = <&misc>;
-			phy-id = <1>;
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		miphy2: miphy@eb808000 {
-			compatible = "st,spear1310-miphy";
-			reg = <0xeb808000 0x4000>;
-			misc = <&misc>;
-			phy-id = <2>;
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		ahci0: ahci@b1000000 {
-			compatible = "snps,spear-ahci";
-			reg = <0xb1000000 0x10000>;
-			interrupts = <0 68 0x4>;
-			phys = <&miphy0 0>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		ahci1: ahci@b1800000 {
-			compatible = "snps,spear-ahci";
-			reg = <0xb1800000 0x10000>;
-			interrupts = <0 69 0x4>;
-			phys = <&miphy1 0>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		ahci2: ahci@b4000000 {
-			compatible = "snps,spear-ahci";
-			reg = <0xb4000000 0x10000>;
-			interrupts = <0 70 0x4>;
-			phys = <&miphy2 0>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		pcie0: pcie@b1000000 {
-			compatible = "st,spear1340-pcie", "snps,dw-pcie";
-			reg = <0xb1000000 0x4000>;
-			interrupts = <0 68 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 68 0x4>;
-			num-lanes = <1>;
-			phys = <&miphy0 1>;
-			phy-names = "pcie-phy";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000   /* configuration space */
-				0x81000000 0 0	 0x80020000 0 0x00010000   /* downstream I/O */
-				0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
-			status = "disabled";
-		};
-
-		pcie1: pcie@b1800000 {
-			compatible = "st,spear1340-pcie", "snps,dw-pcie";
-			reg = <0xb1800000 0x4000>;
-			interrupts = <0 69 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 69 0x4>;
-			num-lanes = <1>;
-			phys = <&miphy1 1>;
-			phy-names = "pcie-phy";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x00000800 0 0x90000000 0x90000000 0 0x00020000   /* configuration space */
-				0x81000000 0 0  0x90020000 0 0x00010000   /* downstream I/O */
-				0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
-			status = "disabled";
-		};
-
-		pcie2: pcie@b4000000 {
-			compatible = "st,spear1340-pcie", "snps,dw-pcie";
-			reg = <0xb4000000 0x4000>;
-			interrupts = <0 70 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 70 0x4>;
-			num-lanes = <1>;
-			phys = <&miphy2 1>;
-			phy-names = "pcie-phy";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x00000800 0 0xc0000000 0xc0000000 0 0x00020000   /* configuration space */
-				0x81000000 0 0	 0xc0020000 0 0x00010000   /* downstream I/O */
-				0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
-			status = "disabled";
-		};
-
-		gmac1: eth@5c400000 {
-			compatible = "st,spear600-gmac";
-			reg = <0x5c400000 0x8000>;
-			interrupts = <0 95 0x4>;
-			interrupt-names = "macirq";
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		gmac2: eth@5c500000 {
-			compatible = "st,spear600-gmac";
-			reg = <0x5c500000 0x8000>;
-			interrupts = <0 96 0x4>;
-			interrupt-names = "macirq";
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		gmac3: eth@5c600000 {
-			compatible = "st,spear600-gmac";
-			reg = <0x5c600000 0x8000>;
-			interrupts = <0 97 0x4>;
-			interrupt-names = "macirq";
-			phy-mode = "rmii";
-			status = "disabled";
-		};
-
-		gmac4: eth@5c700000 {
-			compatible = "st,spear600-gmac";
-			reg = <0x5c700000 0x8000>;
-			interrupts = <0 98 0x4>;
-			interrupt-names = "macirq";
-			phy-mode = "rgmii";
-			status = "disabled";
-		};
-
-		pinmux: pinmux@e0700000 {
-			compatible = "st,spear1310-pinmux";
-			reg = <0xe0700000 0x1000>;
-			#gpio-range-cells = <3>;
-		};
-
-		apb {
-			i2c1: i2c@5cd00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5cd00000 0x1000>;
-				interrupts = <0 87 0x4>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@5ce00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5ce00000 0x1000>;
-				interrupts = <0 88 0x4>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@5cf00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5cf00000 0x1000>;
-				interrupts = <0 89 0x4>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@5d000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5d000000 0x1000>;
-				interrupts = <0 90 0x4>;
-				status = "disabled";
-			};
-
-			i2c5: i2c@5d100000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5d100000 0x1000>;
-				interrupts = <0 91 0x4>;
-				status = "disabled";
-			};
-
-			i2c6: i2c@5d200000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5d200000 0x1000>;
-				interrupts = <0 92 0x4>;
-				status = "disabled";
-			};
-
-			i2c7: i2c@5d300000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0x5d300000 0x1000>;
-				interrupts = <0 93 0x4>;
-				status = "disabled";
-			};
-
-			spi1: spi@5d400000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0x5d400000 0x1000>;
-				interrupts = <0 99 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-
-			serial@5c800000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x5c800000 0x1000>;
-				interrupts = <0 82 0x4>;
-				status = "disabled";
-			};
-
-			serial@5c900000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x5c900000 0x1000>;
-				interrupts = <0 83 0x4>;
-				status = "disabled";
-			};
-
-			serial@5ca00000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x5ca00000 0x1000>;
-				interrupts = <0 84 0x4>;
-				status = "disabled";
-			};
-
-			serial@5cb00000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x5cb00000 0x1000>;
-				interrupts = <0 85 0x4>;
-				status = "disabled";
-			};
-
-			serial@5cc00000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x5cc00000 0x1000>;
-				interrupts = <0 86 0x4>;
-				status = "disabled";
-			};
-
-			thermal@e07008c4 {
-				st,thermal-flags = <0x7000>;
-			};
-
-			gpiopinctrl: gpio@d8400000 {
-				compatible = "st,spear-plgpio";
-				reg = <0xd8400000 0x1000>;
-				interrupts = <0 100 0x4>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinmux 0 0 246>;
-				status = "disabled";
-
-				st-plgpio,ngpio = <246>;
-				st-plgpio,enb-reg = <0xd0>;
-				st-plgpio,wdata-reg = <0x90>;
-				st-plgpio,dir-reg = <0xb0>;
-				st-plgpio,ie-reg = <0x30>;
-				st-plgpio,rdata-reg = <0x70>;
-				st-plgpio,mis-reg = <0x10>;
-				st-plgpio,eit-reg = <0x50>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear1340-evb.dts b/src/arm/spear1340-evb.dts
deleted file mode 100644
index b23e05ed1d60..000000000000
--- a/src/arm/spear1340-evb.dts
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
- * DTS file for SPEAr1340 Evaluation Baord
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear1340.dtsi"
-
-/ {
-	model = "ST SPEAr1340 Evaluation Board";
-	compatible = "st,spear1340-evb", "st,spear1340";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@e0700000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				pads_as_gpio {
-					st,pins = "pads_as_gpio_grp";
-					st,function = "pads_as_gpio";
-				};
-				fsmc {
-					st,pins = "fsmc_8bit_grp";
-					st,function = "fsmc";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				i2c1 {
-					st,pins = "i2c1_grp";
-					st,function = "i2c1";
-				};
-				spdif-in {
-					st,pins = "spdif_in_grp";
-					st,function = "spdif_in";
-				};
-				spdif-out {
-					st,pins = "spdif_out_grp";
-					st,function = "spdif_out";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp", "ssp0_cs1_grp", "ssp0_cs2_grp", "ssp0_cs3_grp";
-					st,function = "ssp0";
-				};
-				smi-pmx {
-					st,pins = "smi_grp";
-					st,function = "smi";
-				};
-				i2s {
-					st,pins = "i2s_in_grp", "i2s_out_grp";
-					st,function = "i2s";
-				};
-				gmac {
-					st,pins = "gmii_grp", "rgmii_grp";
-					st,function = "gmac";
-				};
-				cam0 {
-					st,pins = "cam0_grp";
-					st,function = "cam0";
-				};
-				cam1 {
-					st,pins = "cam1_grp";
-					st,function = "cam1";
-				};
-				cam2 {
-					st,pins = "cam2_grp";
-					st,function = "cam2";
-				};
-				cam3 {
-					st,pins = "cam3_grp";
-					st,function = "cam3";
-				};
-				cec0 {
-					st,pins = "cec0_grp";
-					st,function = "cec0";
-				};
-				cec1 {
-					st,pins = "cec1_grp";
-					st,function = "cec1";
-				};
-				sdhci {
-					st,pins = "sdhci_grp";
-					st,function = "sdhci";
-				};
-				clcd {
-					st,pins = "clcd_grp";
-					st,function = "clcd";
-				};
-				sata {
-					st,pins = "sata_grp";
-					st,function = "sata";
-				};
-				pcie {
-					st,pins = "pcie_grp";
-					st,function = "pcie";
-				};
-
-			};
-		};
-
-		ahci@b1000000 {
-			status = "okay";
-		};
-
-		miphy@eb800000 {
-			status = "okay";
-		};
-
-		dma@ea800000 {
-			status = "okay";
-		};
-
-		dma@eb000000 {
-			status = "okay";
-		};
-
-		fsmc: flash@b0000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "xloader";
-				reg = <0x0 0x200000>;
-			};
-			partition@200000 {
-				label = "u-boot";
-				reg = <0x200000 0x200000>;
-			};
-			partition@400000 {
-				label = "environment";
-				reg = <0x400000 0x100000>;
-			};
-			partition@500000 {
-				label = "dtb";
-				reg = <0x500000 0x100000>;
-			};
-			partition@600000 {
-				label = "linux";
-				reg = <0x600000 0xC00000>;
-			};
-			partition@1200000 {
-				label = "rootfs";
-				reg = <0x1200000 0x0>;
-			};
-		};
-
-		gmac0: eth@e2000000 {
-			phy-mode = "rgmii";
-			status = "okay";
-		};
-
-		sdhci@b3000000 {
-			status = "okay";
-		};
-
-		smi: flash@ea000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@e6000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xe6000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		ehci@e4800000 {
-			status = "okay";
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			button@1 {
-				label = "wakeup";
-				linux,code = <0x100>;
-				gpios = <&gpio1 1 0x4>;
-				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
-			};
-		};
-
-		ehci@e5800000 {
-			status = "okay";
-		};
-
-		i2s0: i2s-play@b2400000 {
-			status = "okay";
-		};
-
-		i2s1: i2s-rec@b2000000 {
-			status = "okay";
-		};
-
-		incodec: dir-hifi {
-			compatible = "dummy,dir-hifi";
-			status = "okay";
-		};
-
-		ohci@e4000000 {
-			status = "okay";
-		};
-
-		ohci@e5000000 {
-			status = "okay";
-		};
-
-		outcodec: dit-hifi {
-			compatible = "dummy,dit-hifi";
-			status = "okay";
-		};
-
-		sound {
-			compatible = "spear,spear-evb";
-			audio-controllers = <&spdif0 &spdif1 &i2s0 &i2s1>;
-			audio-codecs = <&incodec &outcodec &sta529 &sta529>;
-			codec_dai_name = "dir-hifi", "dit-hifi", "sta529-audio", "sta529-audio";
-			stream_name = "spdif-cap", "spdif-play", "i2s-play", "i2s-cap";
-			dai_name = "spdifin-pcm", "spdifout-pcm", "i2s0-pcm", "i2s1-pcm";
-			nr_controllers = <4>;
-		        status = "okay";
-		};
-
-		spdif0: spdif-in@d0100000 {
-			status = "okay";
-		};
-
-		spdif1: spdif-out@d0000000 {
-			status = "okay";
-		};
-
-		apb {
-			adc@e0080000 {
-				status = "okay";
-			};
-
-			i2s-play@b2400000 {
-				status = "okay";
-			};
-
-			i2s-rec@b2000000 {
-				status = "okay";
-			};
-
-			gpio0: gpio@e0600000 {
-			       status = "okay";
-			};
-
-			gpio1: gpio@e0680000 {
-			       status = "okay";
-			};
-
-			gpio@e2800000 {
-			       status = "okay";
-			};
-
-			i2c0: i2c@e0280000 {
-			       status = "okay";
-
-				sta529: sta529@1a {
-					compatible = "st,sta529";
-					reg = <0x1a>;
-				};
-			};
-
-			i2c1: i2c@b4000000 {
-			       status = "okay";
-
-				eeprom0@56 {
-					compatible = "st,eeprom";
-					reg = <0x56>;
-				};
-
-				stmpe801@41 {
-					compatible = "st,stmpe801";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0x41>;
-					interrupts = <4 0x4>;
-					interrupt-parent = <&gpio0>;
-					irq-trigger = <0x2>;
-
-					stmpegpio: stmpe_gpio {
-						compatible = "st,stmpe-gpio";
-						gpio-controller;
-						#gpio-cells = <2>;
-					};
-				};
-			};
-
-			kbd@e0300000 {
-				linux,keymap = < 0x00000001
-						 0x00010002
-						 0x00020003
-						 0x00030004
-						 0x00040005
-						 0x00050006
-						 0x00060007
-						 0x00070008
-						 0x00080009
-						 0x0100000a
-						 0x0101000c
-						 0x0102000d
-						 0x0103000e
-						 0x0104000f
-						 0x01050010
-						 0x01060011
-						 0x01070012
-						 0x01080013
-						 0x02000014
-						 0x02010015
-						 0x02020016
-						 0x02030017
-						 0x02040018
-						 0x02050019
-						 0x0206001a
-						 0x0207001b
-						 0x0208001c
-						 0x0300001d
-						 0x0301001e
-						 0x0302001f
-						 0x03030020
-						 0x03040021
-						 0x03050022
-						 0x03060023
-						 0x03070024
-						 0x03080025
-						 0x04000026
-						 0x04010027
-						 0x04020028
-						 0x04030029
-						 0x0404002a
-						 0x0405002b
-						 0x0406002c
-						 0x0407002d
-						 0x0408002e
-						 0x0500002f
-						 0x05010030
-						 0x05020031
-						 0x05030032
-						 0x05040033
-						 0x05050034
-						 0x05060035
-						 0x05070036
-						 0x05080037
-						 0x06000038
-						 0x06010039
-						 0x0602003a
-						 0x0603003b
-						 0x0604003c
-						 0x0605003d
-						 0x0606003e
-						 0x0607003f
-						 0x06080040
-						 0x07000041
-						 0x07010042
-						 0x07020043
-						 0x07030044
-						 0x07040045
-						 0x07050046
-						 0x07060047
-						 0x07070048
-						 0x07080049
-						 0x0800004a
-						 0x0801004b
-						 0x0802004c
-						 0x0803004d
-						 0x0804004e
-						 0x0805004f
-						 0x08060050
-						 0x08070051
-						 0x08080052 >;
-			       autorepeat;
-			       st,mode = <0>;
-			       suspended_rate = <2000000>;
-			       status = "okay";
-			};
-
-			rtc@e0580000 {
-			       status = "okay";
-			};
-
-			serial@e0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b4100000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			spi0: spi@e0100000 {
-				status = "okay";
-				num-cs = <3>;
-				cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>,
-					   <&gpiopinctrl 85 0>;
-
-				m25p80@0 {
-					compatible = "m25p80";
-					reg = <0>;
-					spi-max-frequency = <12000000>;
-					spi-cpol;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
-
-				stmpe610@1 {
-					compatible = "st,stmpe610";
-					spi-max-frequency = <1000000>;
-					spi-cpha;
-					reg = <1>;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x7>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-					interrupts = <100 0>;
-					interrupt-parent = <&gpiopinctrl>;
-					irq-trigger = <0x2>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					stmpe_touchscreen {
-						compatible = "st,stmpe-ts";
-						ts,sample-time = <4>;
-						ts,mod-12b = <1>;
-						ts,ref-sel = <0>;
-						ts,adc-freq = <1>;
-						ts,ave-ctrl = <1>;
-						ts,touch-det-delay = <2>;
-						ts,settling = <2>;
-						ts,fraction-z = <7>;
-						ts,i-drive = <1>;
-					};
-				};
-
-				spidev@2 {
-					compatible = "spidev";
-					reg = <2>;
-					spi-max-frequency = <25000000>;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
-			};
-
-			timer@ec800600 {
-				status = "okay";
-			};
-
-			wdt@ec800620 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear1340.dtsi b/src/arm/spear1340.dtsi
deleted file mode 100644
index e71df0f2cb52..000000000000
--- a/src/arm/spear1340.dtsi
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * DTS file for all SPEAr1340 SoCs
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "spear13xx.dtsi"
-
-/ {
-	compatible = "st,spear1340";
-
-	ahb {
-
-		spics: spics@e0700000{
-			compatible = "st,spear-spics-gpio";
-			reg = <0xe0700000 0x1000>;
-			st-spics,peripcfg-reg = <0x42c>;
-			st-spics,sw-enable-bit = <21>;
-			st-spics,cs-value-bit = <20>;
-			st-spics,cs-enable-mask = <3>;
-			st-spics,cs-enable-shift = <18>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			status = "disabled";
-		};
-
-		miphy0: miphy@eb800000 {
-			compatible = "st,spear1340-miphy";
-			reg = <0xeb800000 0x4000>;
-			misc = <&misc>;
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		ahci0: ahci@b1000000 {
-			compatible = "snps,spear-ahci";
-			reg = <0xb1000000 0x10000>;
-			interrupts = <0 72 0x4>;
-			phys = <&miphy0 0>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		pcie0: pcie@b1000000 {
-			compatible = "st,spear1340-pcie", "snps,dw-pcie";
-			reg = <0xb1000000 0x4000>;
-			interrupts = <0 68 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 68 0x4>;
-			num-lanes = <1>;
-			phys = <&miphy0 1>;
-			phy-names = "pcie-phy";
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000   /* configuration space */
-				0x81000000 0 0	 0x80020000 0 0x00010000   /* downstream I/O */
-				0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
-			status = "disabled";
-		};
-
-		i2s-play@b2400000 {
-			compatible = "snps,designware-i2s";
-			reg = <0xb2400000 0x10000>;
-			interrupt-names = "play_irq";
-			interrupts = <0 98 0x4
-				      0 99 0x4>;
-			play;
-			channel = <8>;
-			status = "disabled";
-		};
-
-		i2s-rec@b2000000 {
-			compatible = "snps,designware-i2s";
-			reg = <0xb2000000 0x10000>;
-			interrupt-names = "record_irq";
-			interrupts = <0 100  0x4
-				      0 101 0x4>;
-			record;
-			channel = <8>;
-			status = "disabled";
-		};
-
-		pinmux: pinmux@e0700000 {
-			compatible = "st,spear1340-pinmux";
-			reg = <0xe0700000 0x1000>;
-			#gpio-range-cells = <3>;
-		};
-
-		pwm: pwm@e0180000 {
-			compatible ="st,spear13xx-pwm";
-			reg = <0xe0180000 0x1000>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		spdif-in@d0100000 {
-			compatible = "st,spdif-in";
-			reg = < 0xd0100000 0x20000
-				0xd0110000 0x10000 >;
-			interrupts = <0 84 0x4>;
-			status = "disabled";
-		};
-
-		spdif-out@d0000000 {
-			compatible = "st,spdif-out";
-			reg = <0xd0000000 0x20000>;
-			interrupts = <0 85 0x4>;
-			status = "disabled";
-		};
-
-		spi1: spi@5d400000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x5d400000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 99 0x4>;
-			status = "disabled";
-		};
-
-		apb {
-			i2c1: i2c@b4000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xb4000000 0x1000>;
-				interrupts = <0 104 0x4>;
-				write-16bit;
-				status = "disabled";
-			};
-
-			serial@b4100000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb4100000 0x1000>;
-				interrupts = <0 105 0x4>;
-				status = "disabled";
-				dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
-					<&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
-				dma-names = "tx", "rx";
-			};
-
-			thermal@e07008c4 {
-				st,thermal-flags = <0x2a00>;
-			};
-
-			gpiopinctrl: gpio@e2800000 {
-				compatible = "st,spear-plgpio";
-				reg = <0xe2800000 0x1000>;
-				interrupts = <0 107 0x4>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinmux 0 0 252>;
-				status = "disabled";
-
-				st-plgpio,ngpio = <250>;
-				st-plgpio,wdata-reg = <0x40>;
-				st-plgpio,dir-reg = <0x00>;
-				st-plgpio,ie-reg = <0x80>;
-				st-plgpio,rdata-reg = <0x20>;
-				st-plgpio,mis-reg = <0xa0>;
-				st-plgpio,eit-reg = <0x60>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear13xx.dtsi b/src/arm/spear13xx.dtsi
deleted file mode 100644
index a6eb5436d26d..000000000000
--- a/src/arm/spear13xx.dtsi
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * DTS file for all SPEAr13xx SoCs
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	gic: interrupt-controller@ec801000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = < 0xec801000 0x1000 >,
-		      < 0xec800100 0x0100 >;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 6 0x04
-			      0 7 0x04>;
-	};
-
-	L2: l2-cache {
-		    compatible = "arm,pl310-cache";
-		    reg = <0xed000000 0x1000>;
-		    cache-unified;
-		    cache-level = <2>;
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyAMA0,115200";
-	};
-
-	cpufreq {
-		compatible = "st,cpufreq-spear";
-		cpufreq_tbl = < 166000
-				200000
-				250000
-				300000
-				400000
-				500000
-				600000 >;
-		status = "disabled";
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x50000000 0x50000000 0x10000000
-			  0x80000000 0x80000000 0x20000000
-			  0xb0000000 0xb0000000 0x22000000
-			  0xd8000000 0xd8000000 0x01000000
-			  0xe0000000 0xe0000000 0x10000000>;
-
-		sdhci@b3000000 {
-			compatible = "st,sdhci-spear";
-			reg = <0xb3000000 0x100>;
-			interrupts = <0 28 0x4>;
-			status = "disabled";
-		};
-
-		cf@b2800000 {
-			compatible = "arasan,cf-spear1340";
-			reg = <0xb2800000 0x1000>;
-			interrupts = <0 29 0x4>;
-			status = "disabled";
-			dmas = <&dwdma0 0 0 0 0>;
-			dma-names = "data";
-		};
-
-		dwdma0: dma@ea800000 {
-			compatible = "snps,dma-spear1340";
-			reg = <0xea800000 0x1000>;
-			interrupts = <0 19 0x4>;
-			status = "disabled";
-
-			dma-channels = <8>;
-			#dma-cells = <3>;
-			dma-requests = <32>;
-			chan_allocation_order = <1>;
-			chan_priority = <1>;
-			block_size = <0xfff>;
-			dma-masters = <2>;
-			data_width = <3 3 0 0>;
-		};
-
-		dma@eb000000 {
-			compatible = "snps,dma-spear1340";
-			reg = <0xeb000000 0x1000>;
-			interrupts = <0 59 0x4>;
-			status = "disabled";
-
-			dma-requests = <32>;
-			dma-channels = <8>;
-			dma-masters = <2>;
-			#dma-cells = <3>;
-			chan_allocation_order = <1>;
-			chan_priority = <1>;
-			block_size = <0xfff>;
-			data_width = <3 3 0 0>;
-		};
-
-		fsmc: flash@b0000000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xb0000000 0x1000	/* FSMC Register*/
-			       0xb0800000 0x0010	/* NAND Base DATA */
-			       0xb0820000 0x0010	/* NAND Base ADDR */
-			       0xb0810000 0x0010>;	/* NAND Base CMD */
-			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			interrupts = <0 20 0x4
-				      0 21 0x4
-				      0 22 0x4
-				      0 23 0x4>;
-			st,mode = <2>;
-			status = "disabled";
-		};
-
-		gmac0: eth@e2000000 {
-			compatible = "st,spear600-gmac";
-			reg = <0xe2000000 0x8000>;
-			interrupts = <0 33 0x4
-				      0 34 0x4>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			status = "disabled";
-		};
-
-		pcm {
-			compatible = "st,pcm-audio";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		smi: flash@ea000000 {
-			compatible = "st,spear600-smi";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xea000000 0x1000>;
-			interrupts = <0 30 0x4>;
-			status = "disabled";
-		};
-
-		ehci@e4800000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe4800000 0x1000>;
-			interrupts = <0 64 0x4>;
-			usbh0_id = <0>;
-			status = "disabled";
-		};
-
-		ehci@e5800000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe5800000 0x1000>;
-			interrupts = <0 66 0x4>;
-			usbh1_id = <1>;
-			status = "disabled";
-		};
-
-		ohci@e4000000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe4000000 0x1000>;
-			interrupts = <0 65 0x4>;
-			usbh0_id = <0>;
-			status = "disabled";
-		};
-
-		ohci@e5000000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe5000000 0x1000>;
-			interrupts = <0 67 0x4>;
-			usbh1_id = <1>;
-			status = "disabled";
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x50000000 0x50000000 0x10000000
-				  0xb0000000 0xb0000000 0x10000000
-				  0xd0000000 0xd0000000 0x02000000
-				  0xd8000000 0xd8000000 0x01000000
-				  0xe0000000 0xe0000000 0x10000000>;
-
-			misc: syscon@e0700000 {
-				compatible = "st,spear1340-misc", "syscon";
-				reg = <0xe0700000 0x1000>;
-			};
-
-			gpio0: gpio@e0600000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xe0600000 0x1000>;
-				interrupts = <0 24 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			gpio1: gpio@e0680000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xe0680000 0x1000>;
-				interrupts = <0 25 0x4>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			kbd@e0300000 {
-				compatible = "st,spear300-kbd";
-				reg = <0xe0300000 0x1000>;
-				interrupts = <0 52 0x4>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@e0280000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xe0280000 0x1000>;
-				interrupts = <0 41 0x4>;
-				status = "disabled";
-			};
-
-			i2s@e0180000 {
-				compatible = "st,designware-i2s";
-				reg = <0xe0180000 0x1000>;
-				interrupt-names = "play_irq", "record_irq";
-				interrupts = <0 10 0x4
-					      0 11 0x4 >;
-				status = "disabled";
-			};
-
-			i2s@e0200000 {
-				compatible = "st,designware-i2s";
-				reg = <0xe0200000 0x1000>;
-				interrupt-names = "play_irq", "record_irq";
-				interrupts = <0 26 0x4
-					      0 53 0x4>;
-				status = "disabled";
-			};
-
-			spi0: spi@e0100000 {
-				compatible = "arm,pl022", "arm,primecell";
-				reg = <0xe0100000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <0 31 0x4>;
-				status = "disabled";
-				dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
-					<&dwdma0 0x0280 0 0 0>;  /* 0x5 << 7 */
-				dma-names = "tx", "rx";
-			};
-
-			rtc@e0580000 {
-				compatible = "st,spear600-rtc";
-				reg = <0xe0580000 0x1000>;
-				interrupts = <0 36 0x4>;
-				status = "disabled";
-			};
-
-			serial@e0000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xe0000000 0x1000>;
-				interrupts = <0 35 0x4>;
-				status = "disabled";
-			};
-
-			adc@e0080000 {
-				compatible = "st,spear600-adc";
-				reg = <0xe0080000 0x1000>;
-				interrupts = <0 12 0x4>;
-				status = "disabled";
-			};
-
-			timer@e0380000 {
-				compatible = "st,spear-timer";
-				reg = <0xe0380000 0x400>;
-				interrupts = <0 37 0x4>;
-			};
-
-			timer@ec800600 {
-				compatible = "arm,cortex-a9-twd-timer";
-				reg = <0xec800600 0x20>;
-				interrupts = <1 13 0x4>;
-				status = "disabled";
-			};
-
-			wdt@ec800620 {
-				compatible = "arm,cortex-a9-twd-wdt";
-				reg = <0xec800620 0x20>;
-				status = "disabled";
-			};
-
-			thermal@e07008c4 {
-				compatible = "st,thermal-spear1340";
-				reg = <0xe07008c4 0x4>;
-				thermal_flags = <0x7000>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear300-evb.dts b/src/arm/spear300-evb.dts
deleted file mode 100644
index 5de1431653e4..000000000000
--- a/src/arm/spear300-evb.dts
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * DTS file for SPEAr300 Evaluation Baord
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear300.dtsi"
-
-/ {
-	model = "ST SPEAr300 Evaluation Board";
-	compatible = "st,spear300-evb", "st,spear300";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@99000000 {
-			st,pinmux-mode = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp";
-					st,function = "ssp0";
-				};
-				mii0 {
-					st,pins = "mii0_grp";
-					st,function = "mii0";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				clcd {
-					st,pins = "clcd_pfmode_grp";
-					st,function = "clcd";
-				};
-				sdhci {
-					st,pins = "sdhci_4bit_grp";
-					st,function = "sdhci";
-				};
-				gpio1 {
-					st,pins = "gpio1_4_to_7_grp",
-						"gpio1_0_to_3_grp";
-					st,function = "gpio1";
-				};
-			};
-		};
-
-		clcd@60000000 {
-			status = "okay";
-		};
-
-		dma@fc400000 {
-			status = "okay";
-		};
-
-		fsmc: flash@94000000 {
-			status = "okay";
-		};
-
-		gmac: eth@e0800000 {
-			status = "okay";
-		};
-
-		sdhci@70000000 {
-			cd-gpios = <&gpio1 0 0>;
-			status = "okay";
-		};
-
-		smi: flash@fc000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@f8000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xf8000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		spi0: spi@d0100000 {
-			status = "okay";
-		};
-
-		ehci@e1800000 {
-			status = "okay";
-		};
-
-		ohci@e1900000 {
-			status = "okay";
-		};
-
-		ohci@e2100000 {
-			status = "okay";
-		};
-
-		apb {
-			gpio0: gpio@fc980000 {
-			       status = "okay";
-			};
-
-			gpio1: gpio@a9000000 {
-			       status = "okay";
-			};
-
-			i2c0: i2c@d0180000 {
-			       status = "okay";
-			};
-
-			kbd@a0000000 {
-				linux,keymap = < 0x00000001
-						 0x00010002
-						 0x00020003
-						 0x00030004
-						 0x00040005
-						 0x00050006
-						 0x00060007
-						 0x00070008
-						 0x00080009
-						 0x0100000a
-						 0x0101000c
-						 0x0102000d
-						 0x0103000e
-						 0x0104000f
-						 0x01050010
-						 0x01060011
-						 0x01070012
-						 0x01080013
-						 0x02000014
-						 0x02010015
-						 0x02020016
-						 0x02030017
-						 0x02040018
-						 0x02050019
-						 0x0206001a
-						 0x0207001b
-						 0x0208001c
-						 0x0300001d
-						 0x0301001e
-						 0x0302001f
-						 0x03030020
-						 0x03040021
-						 0x03050022
-						 0x03060023
-						 0x03070024
-						 0x03080025
-						 0x04000026
-						 0x04010027
-						 0x04020028
-						 0x04030029
-						 0x0404002a
-						 0x0405002b
-						 0x0406002c
-						 0x0407002d
-						 0x0408002e
-						 0x0500002f
-						 0x05010030
-						 0x05020031
-						 0x05030032
-						 0x05040033
-						 0x05050034
-						 0x05060035
-						 0x05070036
-						 0x05080037
-						 0x06000038
-						 0x06010039
-						 0x0602003a
-						 0x0603003b
-						 0x0604003c
-						 0x0605003d
-						 0x0606003e
-						 0x0607003f
-						 0x06080040
-						 0x07000041
-						 0x07010042
-						 0x07020043
-						 0x07030044
-						 0x07040045
-						 0x07050046
-						 0x07060047
-						 0x07070048
-						 0x07080049
-						 0x0800004a
-						 0x0801004b
-						 0x0802004c
-						 0x0803004d
-						 0x0804004e
-						 0x0805004f
-						 0x08060050
-						 0x08070051
-						 0x08080052 >;
-			       autorepeat;
-			       st,mode = <0>;
-			       status = "okay";
-			};
-
-			rtc@fc900000 {
-			       status = "okay";
-			};
-
-			serial@d0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			wdt@fc880000 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear300.dtsi b/src/arm/spear300.dtsi
deleted file mode 100644
index f79b3dfaabe6..000000000000
--- a/src/arm/spear300.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * DTS file for SPEAr300 SoC
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "spear3xx.dtsi"
-
-/ {
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x60000000 0x60000000 0x50000000
-			  0xd0000000 0xd0000000 0x30000000>;
-
-		pinmux@99000000 {
-			compatible = "st,spear300-pinmux";
-			reg = <0x99000000 0x1000>;
-		};
-
-		clcd@60000000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0x60000000 0x1000>;
-			interrupts = <30>;
-			status = "disabled";
-		};
-
-		fsmc: flash@94000000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x94000000 0x1000	/* FSMC Register */
-			       0x80000000 0x0010	/* NAND Base DATA */
-			       0x80020000 0x0010	/* NAND Base ADDR */
-			       0x80010000 0x0010>;	/* NAND Base CMD */
-			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			status = "disabled";
-		};
-
-		sdhci@70000000 {
-			compatible = "st,sdhci-spear";
-			reg = <0x70000000 0x100>;
-			interrupts = <1>;
-			status = "disabled";
-		};
-
-		shirq: interrupt-controller@0x50000000 {
-			compatible = "st,spear300-shirq";
-			reg = <0x50000000 0x1000>;
-			interrupts = <28>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xa0000000 0xa0000000 0x10000000
-				  0xd0000000 0xd0000000 0x30000000>;
-
-			gpio1: gpio@a9000000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xa9000000 0x1000>;
-				interrupts = <8>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			kbd@a0000000 {
-				compatible = "st,spear300-kbd";
-				reg = <0xa0000000 0x1000>;
-				interrupts = <7>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear310-evb.dts b/src/arm/spear310-evb.dts
deleted file mode 100644
index b09632963d15..000000000000
--- a/src/arm/spear310-evb.dts
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * DTS file for SPEAr310 Evaluation Baord
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear310.dtsi"
-
-/ {
-	model = "ST SPEAr310 Evaluation Board";
-	compatible = "st,spear310-evb", "st,spear310";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@b4000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				gpio0 {
-					st,pins = "gpio0_pin0_grp",
-						"gpio0_pin1_grp",
-						"gpio0_pin2_grp",
-						"gpio0_pin3_grp",
-						"gpio0_pin4_grp",
-						"gpio0_pin5_grp";
-					st,function = "gpio0";
-				};
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				mii0 {
-					st,pins = "mii0_grp";
-					st,function = "mii0";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp";
-					st,function = "ssp0";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				emi {
-					st,pins = "emi_cs_0_to_5_grp";
-					st,function = "emi";
-				};
-				fsmc {
-					st,pins = "fsmc_grp";
-					st,function = "fsmc";
-				};
-				uart1 {
-					st,pins = "uart1_grp";
-					st,function = "uart1";
-				};
-				uart2 {
-					st,pins = "uart2_grp";
-					st,function = "uart2";
-				};
-				uart3 {
-					st,pins = "uart3_grp";
-					st,function = "uart3";
-				};
-				uart4 {
-					st,pins = "uart4_grp";
-					st,function = "uart4";
-				};
-				uart5 {
-					st,pins = "uart5_grp";
-					st,function = "uart5";
-				};
-			};
-		};
-
-		dma@fc400000 {
-			status = "okay";
-		};
-
-		fsmc: flash@44000000 {
-			status = "okay";
-		};
-
-		gmac: eth@e0800000 {
-			status = "okay";
-		};
-
-		smi: flash@fc000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@f8000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xf8000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		spi0: spi@d0100000 {
-			status = "okay";
-		};
-
-		ehci@e1800000 {
-			status = "okay";
-		};
-
-		ohci@e1900000 {
-			status = "okay";
-		};
-
-		ohci@e2100000 {
-			status = "okay";
-		};
-
-		apb {
-			gpio0: gpio@fc980000 {
-			       status = "okay";
-			};
-
-			i2c0: i2c@d0180000 {
-			       status = "okay";
-			};
-
-			rtc@fc900000 {
-			       status = "okay";
-			};
-
-			serial@d0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b2000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b2080000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b2100000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b2180000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@b2200000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			wdt@fc880000 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear310.dtsi b/src/arm/spear310.dtsi
deleted file mode 100644
index 95372080eea6..000000000000
--- a/src/arm/spear310.dtsi
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * DTS file for SPEAr310 SoC
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "spear3xx.dtsi"
-
-/ {
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x40000000 0x40000000 0x10000000
-			  0xb0000000 0xb0000000 0x10000000
-			  0xd0000000 0xd0000000 0x30000000>;
-
-		pinmux: pinmux@b4000000 {
-			compatible = "st,spear310-pinmux";
-			reg = <0xb4000000 0x1000>;
-			#gpio-range-cells = <3>;
-		};
-
-		fsmc: flash@44000000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x44000000 0x1000	/* FSMC Register */
-			       0x40000000 0x0010	/* NAND Base DATA */
-			       0x40020000 0x0010	/* NAND Base ADDR */
-			       0x40010000 0x0010>;	/* NAND Base CMD */
-			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			status = "disabled";
-		};
-
-		shirq: interrupt-controller@0xb4000000 {
-			compatible = "st,spear310-shirq";
-			reg = <0xb4000000 0x1000>;
-			interrupts = <28 29 30 1>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xb0000000 0xb0000000 0x10000000
-				  0xd0000000 0xd0000000 0x30000000>;
-
-			serial@b2000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb2000000 0x1000>;
-				interrupts = <8>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@b2080000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb2080000 0x1000>;
-				interrupts = <9>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@b2100000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb2100000 0x1000>;
-				interrupts = <10>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@b2180000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb2180000 0x1000>;
-				interrupts = <11>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@b2200000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xb2200000 0x1000>;
-				interrupts = <12>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			gpiopinctrl: gpio@b4000000 {
-				compatible = "st,spear-plgpio";
-				reg = <0xb4000000 0x1000>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinmux 0 0 102>;
-				status = "disabled";
-
-				st-plgpio,ngpio = <102>;
-				st-plgpio,enb-reg = <0x10>;
-				st-plgpio,wdata-reg = <0x20>;
-				st-plgpio,dir-reg = <0x30>;
-				st-plgpio,ie-reg = <0x50>;
-				st-plgpio,rdata-reg = <0x40>;
-				st-plgpio,mis-reg = <0x60>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear320-evb.dts b/src/arm/spear320-evb.dts
deleted file mode 100644
index fdedbb514102..000000000000
--- a/src/arm/spear320-evb.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * DTS file for SPEAr320 Evaluation Baord
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear320.dtsi"
-
-/ {
-	model = "ST SPEAr320 Evaluation Board";
-	compatible = "st,spear320-evb", "st,spear320";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@b3000000 {
-			st,pinmux-mode = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				mii0 {
-					st,pins = "mii0_grp";
-					st,function = "mii0";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp";
-					st,function = "ssp0";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				sdhci {
-					st,pins = "sdhci_cd_51_grp";
-					st,function = "sdhci";
-				};
-				i2s {
-					st,pins = "i2s_grp";
-					st,function = "i2s";
-				};
-				uart1 {
-					st,pins = "uart1_grp";
-					st,function = "uart1";
-				};
-				uart2 {
-					st,pins = "uart2_grp";
-					st,function = "uart2";
-				};
-				can0 {
-					st,pins = "can0_grp";
-					st,function = "can0";
-				};
-				can1 {
-					st,pins = "can1_grp";
-					st,function = "can1";
-				};
-				mii2 {
-					st,pins = "mii2_grp";
-					st,function = "mii2";
-				};
-				pwm0_1 {
-					st,pins = "pwm0_1_pin_37_38_grp";
-					st,function = "pwm0_1";
-				};
-			};
-		};
-
-		dma@fc400000 {
-			status = "okay";
-		};
-
-		fsmc: flash@4c000000 {
-			status = "okay";
-		};
-
-		gmac: eth@e0800000 {
-			status = "okay";
-		};
-
-		sdhci@70000000 {
-			power-gpio = <&gpiopinctrl 61 1>;
-			status = "okay";
-		};
-
-		smi: flash@fc000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@f8000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xf8000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		spi0: spi@d0100000 {
-			status = "okay";
-		};
-
-		spi1: spi@a5000000 {
-			status = "okay";
-		};
-
-		spi2: spi@a6000000 {
-			status = "okay";
-		};
-
-		ehci@e1800000 {
-			status = "okay";
-		};
-
-		ohci@e1900000 {
-			status = "okay";
-		};
-
-		ohci@e2100000 {
-			status = "okay";
-		};
-
-		apb {
-			gpio0: gpio@fc980000 {
-			       status = "okay";
-			};
-
-			gpio@b3000000 {
-			       status = "okay";
-			};
-
-			i2c0: i2c@d0180000 {
-			       status = "okay";
-			};
-
-			i2c1: i2c@a7000000 {
-			       status = "okay";
-			};
-
-			rtc@fc900000 {
-			       status = "okay";
-			};
-
-			serial@d0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@a3000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@a4000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			wdt@fc880000 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear320-hmi.dts b/src/arm/spear320-hmi.dts
deleted file mode 100644
index 0aa6fef5ce22..000000000000
--- a/src/arm/spear320-hmi.dts
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * DTS file for SPEAr320 Evaluation Baord
- *
- * Copyright 2012 Shiraz Hashim <shiraz.linux.kernel@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear320.dtsi"
-
-/ {
-	model = "ST SPEAr320 HMI Board";
-	compatible = "st,spear320-hmi", "st,spear320";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		pinmux@b3000000 {
-			st,pinmux-mode = <4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				i2c0 {
-					st,pins = "i2c0_grp";
-					st,function = "i2c0";
-				};
-				ssp0 {
-					st,pins = "ssp0_grp";
-					st,function = "ssp0";
-				};
-				uart0 {
-					st,pins = "uart0_grp";
-					st,function = "uart0";
-				};
-				clcd {
-					st,pins = "clcd_grp";
-					st,function = "clcd";
-				};
-				fsmc {
-					st,pins = "fsmc_8bit_grp";
-					st,function = "fsmc";
-				};
-				sdhci {
-					st,pins = "sdhci_cd_12_grp";
-					st,function = "sdhci";
-				};
-				i2s {
-					st,pins = "i2s_grp";
-					st,function = "i2s";
-				};
-				uart1 {
-					st,pins = "uart1_grp";
-					st,function = "uart1";
-				};
-				uart2 {
-					st,pins = "uart2_grp";
-					st,function = "uart2";
-				};
-				can0 {
-					st,pins = "can0_grp";
-					st,function = "can0";
-				};
-				can1 {
-					st,pins = "can1_grp";
-					st,function = "can1";
-				};
-				mii0_1 {
-					st,pins = "rmii0_1_grp";
-					st,function = "mii0_1";
-				};
-				pwm0_1 {
-					st,pins = "pwm0_1_pin_37_38_grp";
-					st,function = "pwm0_1";
-				};
-				pwm2 {
-					st,pins = "pwm2_pin_34_grp";
-					st,function = "pwm2";
-				};
-			};
-		};
-
-		clcd@90000000 {
-			status = "okay";
-		};
-
-		dma@fc400000 {
-			status = "okay";
-		};
-
-		ehci@e1800000 {
-			status = "okay";
-		};
-
-		fsmc: flash@4c000000 {
-			status = "okay";
-
-			partition@0 {
-				label = "xloader";
-				reg = <0x0 0x80000>;
-			};
-			partition@80000 {
-				label = "u-boot";
-				reg = <0x80000 0x140000>;
-			};
-			partition@1C0000 {
-				label = "environment";
-				reg = <0x1C0000 0x40000>;
-			};
-			partition@200000 {
-				label = "dtb";
-				reg = <0x200000 0x40000>;
-			};
-			partition@240000 {
-				label = "linux";
-				reg = <0x240000 0xC00000>;
-			};
-			partition@E40000 {
-				label = "rootfs";
-				reg = <0xE40000 0x0>;
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			button@1 {
-				label = "user button 1";
-				linux,code = <0x100>;
-				gpios = <&stmpegpio 3 0x4>;
-				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
-			};
-
-			button@2 {
-				label = "user button 2";
-				linux,code = <0x200>;
-				gpios = <&stmpegpio 2 0x4>;
-				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
-			};
-		};
-
-		ohci@e1900000 {
-			status = "okay";
-		};
-
-		ohci@e2100000 {
-			status = "okay";
-		};
-
-		pwm: pwm@a8000000 {
-			status = "okay";
-		};
-
-		sdhci@70000000 {
-			power-gpio = <&gpiopinctrl 50 1>;
-			power_always_enb;
-			status = "okay";
-		};
-
-		smi: flash@fc000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@f8000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xf8000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		spi0: spi@d0100000 {
-			status = "okay";
-		};
-
-		spi1: spi@a5000000 {
-			status = "okay";
-		};
-
-		spi2: spi@a6000000 {
-			status = "okay";
-		};
-
-		usbd@e1100000 {
-			status = "okay";
-		};
-
-		apb {
-			gpio0: gpio@fc980000 {
-			       status = "okay";
-			};
-
-			gpio@b3000000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@d0180000 {
-				status = "okay";
-
-				stmpe811@41 {
-					compatible = "st,stmpe811";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0x41>;
-					irq-over-gpio;
-					irq-gpios = <&gpiopinctrl 29 0x4>;
-					id = <0>;
-					blocks = <0x5>;
-					irq-trigger = <0x1>;
-
-					stmpegpio: stmpe-gpio {
-						compatible = "stmpe,gpio";
-						reg = <0>;
-						gpio-controller;
-						#gpio-cells = <2>;
-						gpio,norequest-mask = <0xF3>;
-					};
-
-					stmpe610-ts {
-						compatible = "stmpe,ts";
-						reg = <0>;
-						ts,sample-time = <4>;
-						ts,mod-12b = <1>;
-						ts,ref-sel = <0>;
-						ts,adc-freq = <1>;
-						ts,ave-ctrl = <1>;
-						ts,touch-det-delay = <3>;
-						ts,settling = <4>;
-						ts,fraction-z = <7>;
-						ts,i-drive = <1>;
-					};
-				};
-			};
-
-			i2c1: i2c@a7000000 {
-			       status = "okay";
-			};
-
-			rtc@fc900000 {
-			       status = "okay";
-			};
-
-			serial@d0000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@a3000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@a4000000 {
-			       status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			wdt@fc880000 {
-			       status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear320.dtsi b/src/arm/spear320.dtsi
deleted file mode 100644
index ffea342aeec9..000000000000
--- a/src/arm/spear320.dtsi
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * DTS file for SPEAr320 SoC
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "spear3xx.dtsi"
-
-/ {
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x40000000 0x40000000 0x80000000
-			  0xd0000000 0xd0000000 0x30000000>;
-
-		pinmux: pinmux@b3000000 {
-			compatible = "st,spear320-pinmux";
-			reg = <0xb3000000 0x1000>;
-			#gpio-range-cells = <3>;
-		};
-
-		clcd@90000000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0x90000000 0x1000>;
-			interrupts = <8>;
-			interrupt-parent = <&shirq>;
-			status = "disabled";
-		};
-
-		fsmc: flash@4c000000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x4c000000 0x1000	/* FSMC Register */
-			       0x50000000 0x0010	/* NAND Base DATA */
-			       0x50020000 0x0010	/* NAND Base ADDR */
-			       0x50010000 0x0010>;	/* NAND Base CMD */
-			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			status = "disabled";
-		};
-
-		sdhci@70000000 {
-			compatible = "st,sdhci-spear";
-			reg = <0x70000000 0x100>;
-			interrupts = <10>;
-			interrupt-parent = <&shirq>;
-			status = "disabled";
-		};
-
-		shirq: interrupt-controller@0xb3000000 {
-			compatible = "st,spear320-shirq";
-			reg = <0xb3000000 0x1000>;
-			interrupts = <30 28 29 1>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-		};
-
-		spi1: spi@a5000000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0xa5000000 0x1000>;
-			interrupts = <15>;
-			interrupt-parent = <&shirq>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@a6000000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0xa6000000 0x1000>;
-			interrupts = <16>;
-			interrupt-parent = <&shirq>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm: pwm@a8000000 {
-			compatible ="st,spear-pwm";
-			reg = <0xa8000000 0x1000>;
-			#pwm-cells = <2>;
-			status = "disabled";
-                };
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xa0000000 0xa0000000 0x20000000
-				  0xd0000000 0xd0000000 0x30000000>;
-
-			i2c1: i2c@a7000000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xa7000000 0x1000>;
-				interrupts = <21>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@a3000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xa3000000 0x1000>;
-				interrupts = <13>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			serial@a4000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xa4000000 0x1000>;
-				interrupts = <14>;
-				interrupt-parent = <&shirq>;
-				status = "disabled";
-			};
-
-			gpiopinctrl: gpio@b3000000 {
-				compatible = "st,spear-plgpio";
-				reg = <0xb3000000 0x1000>;
-				#interrupt-cells = <1>;
-				interrupt-controller;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinmux 0 0 102>;
-				status = "disabled";
-
-				st-plgpio,ngpio = <102>;
-				st-plgpio,enb-reg = <0x24>;
-				st-plgpio,wdata-reg = <0x34>;
-				st-plgpio,dir-reg = <0x44>;
-				st-plgpio,ie-reg = <0x64>;
-				st-plgpio,rdata-reg = <0x54>;
-				st-plgpio,mis-reg = <0x84>;
-				st-plgpio,eit-reg = <0x94>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear3xx.dtsi b/src/arm/spear3xx.dtsi
deleted file mode 100644
index f0e3fcf8e323..000000000000
--- a/src/arm/spear3xx.dtsi
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * DTS file for all SPEAr3xx SoCs
- *
- * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&vic>;
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0xd0000000 0xd0000000 0x30000000>;
-
-		vic: interrupt-controller@f1100000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xf1100000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		dma@fc400000 {
-			compatible = "arm,pl080", "arm,primecell";
-			reg = <0xfc400000 0x1000>;
-			interrupt-parent = <&vic>;
-			interrupts = <8>;
-			status = "disabled";
-		};
-
-		gmac: eth@e0800000 {
-			compatible = "st,spear600-gmac";
-			reg = <0xe0800000 0x8000>;
-			interrupts = <23 22>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			phy-mode = "mii";
-			status = "disabled";
-		};
-
-		smi: flash@fc000000 {
-			compatible = "st,spear600-smi";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xfc000000 0x1000>;
-			interrupts = <9>;
-			status = "disabled";
-		};
-
-		spi0: spi@d0100000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0xd0100000 0x1000>;
-			interrupts = <20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		ehci@e1800000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe1800000 0x1000>;
-			interrupts = <26>;
-			status = "disabled";
-		};
-
-		ohci@e1900000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe1900000 0x1000>;
-			interrupts = <25>;
-			status = "disabled";
-		};
-
-		ohci@e2100000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe2100000 0x1000>;
-			interrupts = <27>;
-			status = "disabled";
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xd0000000 0xd0000000 0x30000000>;
-
-			gpio0: gpio@fc980000 {
-				compatible = "arm,pl061", "arm,primecell";
-				reg = <0xfc980000 0x1000>;
-				interrupts = <11>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@d0180000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xd0180000 0x1000>;
-				interrupts = <21>;
-				status = "disabled";
-			};
-
-			rtc@fc900000 {
-				compatible = "st,spear600-rtc";
-				reg = <0xfc900000 0x1000>;
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			serial@d0000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xd0000000 0x1000>;
-				interrupts = <19>;
-				status = "disabled";
-			};
-
-			wdt@fc880000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0xfc880000 0x1000>;
-				interrupts = <12>;
-				status = "disabled";
-			};
-
-			timer@f0000000 {
-				compatible = "st,spear-timer";
-				reg = <0xf0000000 0x400>;
-				interrupts = <2>;
-			};
-		};
-	};
-};
diff --git a/src/arm/spear600-evb.dts b/src/arm/spear600-evb.dts
deleted file mode 100644
index d865a891776d..000000000000
--- a/src/arm/spear600-evb.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "spear600.dtsi"
-
-/ {
-	model = "ST SPEAr600 Evaluation Board";
-	compatible = "st,spear600-evb", "st,spear600";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-
-	ahb {
-		clcd@fc200000 {
-			status = "okay";
-		};
-
-		dma@fc400000 {
-			status = "okay";
-		};
-
-		ehci@e1800000 {
-			status = "okay";
-		};
-
-		ehci@e2000000 {
-			status = "okay";
-		};
-
-		gmac: ethernet@e0800000 {
-			phy-mode = "gmii";
-			status = "okay";
-		};
-
-		ohci@e1900000 {
-			status = "okay";
-		};
-
-		ohci@e2100000 {
-			status = "okay";
-		};
-
-		smi: flash@fc000000 {
-			status = "okay";
-			clock-rate=<50000000>;
-
-			flash@f8000000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0xf8000000 0x800000>;
-				st,smi-fast-mode;
-
-				partition@0 {
-					label = "xloader";
-					reg = <0x0 0x10000>;
-				};
-				partition@10000 {
-					label = "u-boot";
-					reg = <0x10000 0x50000>;
-				};
-				partition@60000 {
-					label = "environment";
-					reg = <0x60000 0x10000>;
-				};
-				partition@70000 {
-					label = "dtb";
-					reg = <0x70000 0x10000>;
-				};
-				partition@80000 {
-					label = "linux";
-					reg = <0x80000 0x310000>;
-				};
-				partition@390000 {
-					label = "rootfs";
-					reg = <0x390000 0x0>;
-				};
-			};
-		};
-
-		apb {
-			serial@d0000000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			serial@d0080000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <>;
-			};
-
-			rtc@fc900000 {
-			       status = "okay";
-			};
-
-			i2c@d0200000 {
-				clock-frequency = <400000>;
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/src/arm/spear600.dtsi b/src/arm/spear600.dtsi
deleted file mode 100644
index 9f60a7b6a42b..000000000000
--- a/src/arm/spear600.dtsi
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "st,spear600";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			compatible = "arm,arm926ej-s";
-			device_type = "cpu";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	ahb {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0xd0000000 0xd0000000 0x30000000>;
-
-		vic0: interrupt-controller@f1100000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xf1100000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		vic1: interrupt-controller@f1000000 {
-			compatible = "arm,pl190-vic";
-			interrupt-controller;
-			reg = <0xf1000000 0x1000>;
-			#interrupt-cells = <1>;
-		};
-
-		clcd@fc200000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0xfc200000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <12>;
-			status = "disabled";
-		};
-
-		dma@fc400000 {
-			compatible = "arm,pl080", "arm,primecell";
-			reg = <0xfc400000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <10>;
-			status = "disabled";
-		};
-
-		gmac: ethernet@e0800000 {
-			compatible = "st,spear600-gmac";
-			reg = <0xe0800000 0x8000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <24 23>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			phy-mode = "gmii";
-			status = "disabled";
-		};
-
-		fsmc: flash@d1800000 {
-			compatible = "st,spear600-fsmc-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xd1800000 0x1000	/* FSMC Register */
-			       0xd2000000 0x0010	/* NAND Base DATA */
-			       0xd2020000 0x0010	/* NAND Base ADDR */
-			       0xd2010000 0x0010>;	/* NAND Base CMD */
-			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-			status = "disabled";
-		};
-
-		smi: flash@fc000000 {
-			compatible = "st,spear600-smi";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xfc000000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <12>;
-			status = "disabled";
-		};
-
-		ehci@e1800000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe1800000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <27>;
-			status = "disabled";
-		};
-
-		ehci@e2000000 {
-			compatible = "st,spear600-ehci", "usb-ehci";
-			reg = <0xe2000000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <29>;
-			status = "disabled";
-		};
-
-		ohci@e1900000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe1900000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <26>;
-			status = "disabled";
-		};
-
-		ohci@e2100000 {
-			compatible = "st,spear600-ohci", "usb-ohci";
-			reg = <0xe2100000 0x1000>;
-			interrupt-parent = <&vic1>;
-			interrupts = <28>;
-			status = "disabled";
-		};
-
-		apb {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0xd0000000 0xd0000000 0x30000000>;
-
-			serial@d0000000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xd0000000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <24>;
-				status = "disabled";
-			};
-
-			serial@d0080000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0xd0080000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <25>;
-				status = "disabled";
-			};
-
-			/* local/cpu GPIO */
-			gpio0: gpio@f0100000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xf0100000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <18>;
-			};
-
-			/* basic GPIO */
-			gpio1: gpio@fc980000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xfc980000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <19>;
-			};
-
-			/* appl GPIO */
-			gpio2: gpio@d8100000 {
-				#gpio-cells = <2>;
-				compatible = "arm,pl061", "arm,primecell";
-				gpio-controller;
-				reg = <0xd8100000 0x1000>;
-				interrupt-parent = <&vic1>;
-				interrupts = <4>;
-			};
-
-			i2c@d0200000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "snps,designware-i2c";
-				reg = <0xd0200000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <28>;
-				status = "disabled";
-			};
-
-			rtc@fc900000 {
-				compatible = "st,spear600-rtc";
-				reg = <0xfc900000 0x1000>;
-				interrupts = <10>;
-				status = "disabled";
-			};
-
-			timer@f0000000 {
-				compatible = "st,spear-timer";
-				reg = <0xf0000000 0x400>;
-				interrupt-parent = <&vic0>;
-				interrupts = <16>;
-			};
-		};
-	};
-};
diff --git a/src/arm/st-pincfg.h b/src/arm/st-pincfg.h
deleted file mode 100644
index 4851c387d52d..000000000000
--- a/src/arm/st-pincfg.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _ST_PINCFG_H_
-#define _ST_PINCFG_H_
-
-/* Alternate functions */
-#define ALT1	1
-#define ALT2	2
-#define ALT3	3
-#define ALT4	4
-#define ALT5	5
-#define ALT6	6
-#define ALT7	7
-
-/* Output enable */
-#define OE			(1 << 27)
-/* Pull Up */
-#define PU			(1 << 26)
-/* Open Drain */
-#define OD			(1 << 25)
-#define RT			(1 << 23)
-#define INVERTCLK		(1 << 22)
-#define CLKNOTDATA		(1 << 21)
-#define DOUBLE_EDGE		(1 << 20)
-#define CLK_A			(0 << 18)
-#define CLK_B			(1 << 18)
-#define CLK_C			(2 << 18)
-#define CLK_D			(3 << 18)
-
-/* User-frendly defines for Pin Direction */
-		/* oe = 0, pu = 0, od = 0 */
-#define IN			(0)
-		/* oe = 0, pu = 1, od = 0 */
-#define IN_PU			(PU)
-		/* oe = 1, pu = 0, od = 0 */
-#define OUT			(OE)
-		/* oe = 1, pu = 0, od = 1 */
-#define BIDIR			(OE | OD)
-		/* oe = 1, pu = 1, od = 1 */
-#define BIDIR_PU		(OE | PU | OD)
-
-/* RETIME_TYPE */
-/*
- * B Mode
- * Bypass retime with optional delay parameter
- */
-#define BYPASS		(0)
-/*
- * R0, R1, R0D, R1D modes
- * single-edge data non inverted clock, retime data with clk
- */
-#define SE_NICLK_IO	(RT)
-/*
- * RIV0, RIV1, RIV0D, RIV1D modes
- * single-edge data inverted clock, retime data with clk
- */
-#define SE_ICLK_IO	(RT | INVERTCLK)
-/*
- * R0E, R1E, R0ED, R1ED modes
- * double-edge data, retime data with clk
- */
-#define DE_IO		(RT | DOUBLE_EDGE)
-/*
- * CIV0, CIV1 modes with inverted clock
- * Retiming the clk pins will park clock & reduce the noise within the core.
- */
-#define ICLK		(RT | CLKNOTDATA | INVERTCLK)
-/*
- * CLK0, CLK1 modes with non-inverted clock
- * Retiming the clk pins will park clock & reduce the noise within the core.
- */
-#define NICLK		(RT | CLKNOTDATA)
-#endif /* _ST_PINCFG_H_ */
diff --git a/src/arm/ste-ccu8540-pinctrl.dtsi b/src/arm/ste-ccu8540-pinctrl.dtsi
deleted file mode 100644
index e0799966bc25..000000000000
--- a/src/arm/ste-ccu8540-pinctrl.dtsi
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include "ste-nomadik-pinctrl.dtsi"
-
-/ {
-	soc {
-		pinctrl {
-			uart0 {
-				uart0_default_mux: uart0_mux {
-					default_mux {
-						ste,function = "u0";
-						ste,pins = "u0_a_1";
-					};
-				};
-
-				uart0_default_mode: uart0_default {
-					default_cfg1 {
-						ste,pins = "GPIO0", "GPIO2";
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						ste,pins = "GPIO1", "GPIO3";
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart0_sleep_mode: uart0_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO0", "GPIO2";
-						ste,config = <&slpm_in_pu>;
-					};
-
-					sleep_cfg2 {
-						ste,pins = "GPIO1", "GPIO3";
-						ste,config = <&slpm_out_hi>;
-					};
-				};
-			};
-
-			uart2 {
-				uart2_default_mode: uart2_default {
-					default_mux {
-						ste,function = "u2";
-						ste,pins = "u2txrx_a_1";
-					};
-
-					default_cfg1 {
-						ste,pins = "GPIO120";
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						ste,pins = "GPIO121";
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart2_sleep_mode: uart2_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO120";
-						ste,config = <&slpm_in_pu>;
-					};
-
-					sleep_cfg2 {
-						ste,pins = "GPIO121";
-						ste,config = <&slpm_out_hi>;
-					};
-				};
-			};
-
-			i2c0 {
-				i2c0_default_mux: i2c_mux {
-					default_mux {
-						ste,function = "i2c0";
-						ste,pins = "i2c0_a_1";
-					};
-				};
-
-				i2c0_default_mode: i2c_default {
-					default_cfg1 {
-						ste,pins = "GPIO147", "GPIO148";
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c0_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO147", "GPIO148";
-						ste,config = <&slpm_in_pu>;
-					};
-				};
-			};
-
-			i2c1 {
-				i2c1_default_mux: i2c_mux {
-					default_mux {
-						ste,function = "i2c1";
-						ste,pins = "i2c1_b_2";
-					};
-				};
-
-				i2c1_default_mode: i2c_default {
-					default_cfg1 {
-						ste,pins = "GPIO16", "GPIO17";
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c1_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO16", "GPIO17";
-						ste,config = <&slpm_in_pu>;
-					};
-				};
-			};
-
-			i2c2 {
-				i2c2_default_mux: i2c_mux {
-					default_mux {
-						ste,function = "i2c2";
-						ste,pins = "i2c2_b_2";
-					};
-				};
-
-				i2c2_default_mode: i2c_default {
-					default_cfg1 {
-						ste,pins = "GPIO10", "GPIO11";
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c2_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO11", "GPIO11";
-						ste,config = <&slpm_in_pu>;
-					};
-				};
-			};
-
-			i2c4 {
-				i2c4_default_mux: i2c_mux {
-					default_mux {
-						ste,function = "i2c4";
-						ste,pins = "i2c4_b_2";
-					};
-				};
-
-				i2c4_default_mode: i2c_default {
-					default_cfg1 {
-						ste,pins = "GPIO122", "GPIO123";
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c4_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO122", "GPIO123";
-						ste,config = <&slpm_in_pu>;
-					};
-				};
-			};
-
-			i2c5 {
-				i2c5_default_mux: i2c_mux {
-					default_mux {
-						ste,function = "i2c5";
-						ste,pins = "i2c5_c_2";
-					};
-				};
-
-				i2c5_default_mode: i2c_default {
-					default_cfg1 {
-						ste,pins = "GPIO118", "GPIO119";
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c5_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO118", "GPIO119";
-						ste,config = <&slpm_in_pu>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-ccu8540.dts b/src/arm/ste-ccu8540.dts
deleted file mode 100644
index 32dd55e5f4e6..000000000000
--- a/src/arm/ste-ccu8540.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright 2013 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-dbx5x0.dtsi"
-#include "ste-ccu8540-pinctrl.dtsi"
-
-/ {
-	model = "ST-Ericsson U8540 platform with Device Tree";
-	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
-	};
-
-	soc {
-		pinctrl {
-			compatible = "stericsson,db8540-pinctrl";
-		};
-
-		prcmu@80157000 {
-			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
-			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-		};
-
-		uart@80120000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
-			status = "okay";
-		};
-
-		i2c0: i2c@80004000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
-		};
-
-		i2c1: i2c@80122000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
-		};
-
-		i2c2: i2c@80128000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
-		};
-
-		i2c3: i2c@80110000 {
-			status = "disabled";
-		};
-
-		i2c4: i2c@8012a000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>;
-			pinctrl-1 = <&i2c4_sleep_mode>;
-		};
-
-		i2c5: i2c@80001000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>;
-			pinctrl-1 = <&i2c5_sleep_mode>;
-		};
-	};
-};
diff --git a/src/arm/ste-ccu9540.dts b/src/arm/ste-ccu9540.dts
deleted file mode 100644
index 651c56d400a4..000000000000
--- a/src/arm/ste-ccu9540.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-dbx5x0.dtsi"
-
-/ {
-	model = "ST-Ericsson CCU9540 platform with Device Tree";
-	compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	soc {
-		uart@80120000 {
-			status = "okay";
-		};
-
-		uart@80121000 {
-			status = "okay";
-		};
-
-		uart@80007000 {
-			status = "okay";
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
-			cd-gpios  = <&gpio7 6 0x4>; // 230
-			cd-inverted;
-
-			status = "okay";
-		};
-
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/ste-dbx5x0.dtsi b/src/arm/ste-dbx5x0.dtsi
deleted file mode 100644
index 9d2323020d34..000000000000
--- a/src/arm/ste-dbx5x0.dtsi
+++ /dev/null
@@ -1,1049 +0,0 @@
-/*
- * Copyright 2012 Linaro Ltd
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/mfd/dbx500-prcmu.h>
-#include "skeleton.dtsi"
-
-/ {
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "stericsson,db8500";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		intc: interrupt-controller@a0411000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0xa0411000 0x1000>,
-			      <0xa0410100 0x100>;
-		};
-
-		L2: l2-cache {
-			compatible = "arm,pl310-cache";
-			reg = <0xa0412000 0x1000>;
-			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-
-		clocks {
-			compatible = "stericsson,u8500-clks";
-
-			prcmu_clk: prcmu-clock {
-				#clock-cells = <1>;
-			};
-
-			prcc_pclk: prcc-periph-clock {
-				#clock-cells = <2>;
-			};
-
-			prcc_kclk: prcc-kernel-clock {
-				#clock-cells = <2>;
-			};
-
-			rtc_clk: rtc32k-clock {
-				#clock-cells = <0>;
-			};
-
-			smp_twd_clk: smp-twd-clock {
-				#clock-cells = <0>;
-			};
-		};
-
-		mtu@a03c6000 {
-			/* Nomadik System Timer */
-			compatible = "st,nomadik-mtu";
-			reg = <0xa03c6000 0x1000>;
-			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
-			clock-names = "timclk", "apb_pclk";
-		};
-
-		timer@a0410600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xa0410600 0x20>;
-			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
-
-			clocks = <&smp_twd_clk>;
-		};
-
-		rtc@80154000 {
-			compatible = "arm,rtc-pl031", "arm,primecell";
-			reg = <0x80154000 0x1000>;
-			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&rtc_clk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio0: gpio@8012e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8012e000 0x80>;
-			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <0>;
-
-			clocks = <&prcc_pclk 1 9>;
-		};
-
-		gpio1: gpio@8012e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8012e080 0x80>;
-			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <1>;
-
-			clocks = <&prcc_pclk 1 9>;
-		};
-
-		gpio2: gpio@8000e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e000 0x80>;
-			interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <2>;
-
-			clocks = <&prcc_pclk 3 8>;
-		};
-
-		gpio3: gpio@8000e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e080 0x80>;
-			interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <3>;
-
-			clocks = <&prcc_pclk 3 8>;
-		};
-
-		gpio4: gpio@8000e100 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e100 0x80>;
-			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <4>;
-
-			clocks = <&prcc_pclk 3 8>;
-		};
-
-		gpio5: gpio@8000e180 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8000e180 0x80>;
-			interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <5>;
-
-			clocks = <&prcc_pclk 3 8>;
-		};
-
-		gpio6: gpio@8011e000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8011e000 0x80>;
-			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <6>;
-
-			clocks = <&prcc_pclk 2 11>;
-		};
-
-		gpio7: gpio@8011e080 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0x8011e080 0x80>;
-			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <7>;
-
-			clocks = <&prcc_pclk 2 11>;
-		};
-
-		gpio8: gpio@a03fe000 {
-			compatible = "stericsson,db8500-gpio",
-				"st,nomadik-gpio";
-			reg =  <0xa03fe000 0x80>;
-			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			st,supports-sleepmode;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-bank = <8>;
-
-			clocks = <&prcc_pclk 5 1>;
-		};
-
-		pinctrl {
-			compatible = "stericsson,db8500-pinctrl";
-			prcm = <&prcmu>;
-		};
-
-		usb_per5@a03e0000 {
-			compatible = "stericsson,db8500-musb";
-			reg = <0xa03e0000 0x10000>;
-			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc";
-
-			dr_mode = "otg";
-
-			dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
-			       <&dma 38 0 0x0>, /* Logical - MemToDev */
-			       <&dma 37 0 0x2>, /* Logical - DevToMem */
-			       <&dma 37 0 0x0>, /* Logical - MemToDev */
-			       <&dma 36 0 0x2>, /* Logical - DevToMem */
-			       <&dma 36 0 0x0>, /* Logical - MemToDev */
-			       <&dma 19 0 0x2>, /* Logical - DevToMem */
-			       <&dma 19 0 0x0>, /* Logical - MemToDev */
-			       <&dma 18 0 0x2>, /* Logical - DevToMem */
-			       <&dma 18 0 0x0>, /* Logical - MemToDev */
-			       <&dma 17 0 0x2>, /* Logical - DevToMem */
-			       <&dma 17 0 0x0>, /* Logical - MemToDev */
-			       <&dma 16 0 0x2>, /* Logical - DevToMem */
-			       <&dma 16 0 0x0>, /* Logical - MemToDev */
-			       <&dma 39 0 0x2>, /* Logical - DevToMem */
-			       <&dma 39 0 0x0>; /* Logical - MemToDev */
-
-			dma-names = "iep_1_9",  "oep_1_9",
-				    "iep_2_10", "oep_2_10",
-				    "iep_3_11", "oep_3_11",
-				    "iep_4_12", "oep_4_12",
-				    "iep_5_13", "oep_5_13",
-				    "iep_6_14", "oep_6_14",
-				    "iep_7_15", "oep_7_15",
-				    "iep_8",    "oep_8";
-
-			clocks = <&prcc_pclk 5 0>;
-		};
-
-		dma: dma-controller@801C0000 {
-			compatible = "stericsson,db8500-dma40", "stericsson,dma40";
-			reg = <0x801C0000 0x1000 0x40010000 0x800>;
-			reg-names = "base", "lcpa";
-			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-
-			#dma-cells = <3>;
-			memcpy-channels = <56 57 58 59 60>;
-
-			clocks = <&prcmu_clk PRCMU_DMACLK>;
-		};
-
-		prcmu: prcmu@80157000 {
-			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
-			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
-			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ranges;
-
-			prcmu-timer-4@80157450 {
-				compatible = "stericsson,db8500-prcmu-timer-4";
-				reg = <0x80157450 0xC>;
-			};
-
-			cpufreq {
-				compatible = "stericsson,cpufreq-ux500";
-				clocks = <&prcmu_clk PRCMU_ARMSS>;
-				clock-names = "armss";
-				status = "disabled";
-			};
-
-			thermal@801573c0 {
-				compatible = "stericsson,db8500-thermal";
-				reg = <0x801573c0 0x40>;
-				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
-					     <22 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
-				status = "disabled";
-			};
-
-			db8500-prcmu-regulators {
-				compatible = "stericsson,db8500-prcmu-regulator";
-
-				// DB8500_REGULATOR_VAPE
-				db8500_vape_reg: db8500_vape {
-					regulator-compatible = "db8500_vape";
-					regulator-always-on;
-				};
-
-				// DB8500_REGULATOR_VARM
-				db8500_varm_reg: db8500_varm {
-					regulator-compatible = "db8500_varm";
-				};
-
-				// DB8500_REGULATOR_VMODEM
-				db8500_vmodem_reg: db8500_vmodem {
-					regulator-compatible = "db8500_vmodem";
-				};
-
-				// DB8500_REGULATOR_VPLL
-				db8500_vpll_reg: db8500_vpll {
-					regulator-compatible = "db8500_vpll";
-				};
-
-				// DB8500_REGULATOR_VSMPS1
-				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-compatible = "db8500_vsmps1";
-				};
-
-				// DB8500_REGULATOR_VSMPS2
-				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-compatible = "db8500_vsmps2";
-				};
-
-				// DB8500_REGULATOR_VSMPS3
-				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-compatible = "db8500_vsmps3";
-				};
-
-				// DB8500_REGULATOR_VRF1
-				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-compatible = "db8500_vrf1";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAMMDSP
-				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-compatible = "db8500_sva_mmdsp";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
-				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-compatible = "db8500_sva_mmdsp_ret";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SVAPIPE
-				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-compatible = "db8500_sva_pipe";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAMMDSP
-				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-compatible = "db8500_sia_mmdsp";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
-				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-				};
-
-				// DB8500_REGULATOR_SWITCH_SIAPIPE
-				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-compatible = "db8500_sia_pipe";
-				};
-
-				// DB8500_REGULATOR_SWITCH_SGA
-				db8500_sga_reg: db8500_sga {
-					regulator-compatible = "db8500_sga";
-					vin-supply = <&db8500_vape_reg>;
-				};
-
-				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
-				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-compatible = "db8500_b2r2_mcde";
-					vin-supply = <&db8500_vape_reg>;
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM12
-				db8500_esram12_reg: db8500_esram12 {
-					regulator-compatible = "db8500_esram12";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM12RET
-				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-compatible = "db8500_esram12_ret";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM34
-				db8500_esram34_reg: db8500_esram34 {
-					regulator-compatible = "db8500_esram34";
-				};
-
-				// DB8500_REGULATOR_SWITCH_ESRAM34RET
-				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-compatible = "db8500_esram34_ret";
-				};
-			};
-
-			ab8500 {
-				compatible = "stericsson,ab8500";
-				interrupt-parent = <&intc>;
-				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-
-				ab8500_gpio: ab8500-gpio {
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				ab8500-rtc {
-					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "60S", "ALARM";
-				};
-
-				ab8500-gpadc {
-					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
-						      39 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "HW_CONV_END", "SW_CONV_END";
-					vddadc-supply = <&ab8500_ldo_tvout_reg>;
-				};
-
-				ab8500_battery: ab8500_battery {
-					stericsson,battery-type = "LIPO";
-					thermistor-on-batctrl;
-				};
-
-				ab8500_fg {
-					compatible = "stericsson,ab8500-fg";
-					battery	   = <&ab8500_battery>;
-				};
-
-				ab8500_btemp {
-					compatible = "stericsson,ab8500-btemp";
-					battery	   = <&ab8500_battery>;
-				};
-
-				ab8500_charger {
-					compatible	= "stericsson,ab8500-charger";
-					battery		= <&ab8500_battery>;
-					vddadc-supply	= <&ab8500_ldo_tvout_reg>;
-				};
-
-				ab8500_chargalg {
-					compatible	= "stericsson,ab8500-chargalg";
-					battery		= <&ab8500_battery>;
-				};
-
-				ab8500_usb {
-					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "ID_WAKEUP_R",
-							  "ID_WAKEUP_F",
-							  "VBUS_DET_F",
-							  "VBUS_DET_R",
-							  "USB_LINK_STATUS",
-							  "USB_ADP_PROBE_PLUG",
-							  "USB_ADP_PROBE_UNPLUG";
-					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
-					v-ape-supply = <&db8500_vape_reg>;
-					musb_1v8-supply = <&db8500_vsmps2_reg>;
-				};
-
-				ab8500-ponkey {
-					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
-				};
-
-				ab8500-sysctrl {
-					compatible = "stericsson,ab8500-sysctrl";
-				};
-
-				ab8500-pwm {
-					compatible = "stericsson,ab8500-pwm";
-				};
-
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
-					compatible = "stericsson,ab8500-codec";
-
-					V-AUD-supply = <&ab8500_ldo_audio_reg>;
-					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
-					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
-					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
-
-					stericsson,earpeice-cmv = <950>; /* Units in mV. */
-				};
-
-				ext_regulators: ab8500-ext-regulators {
-					compatible = "stericsson,ab8500-ext-regulator";
-
-					ab8500_ext1_reg: ab8500_ext1 {
-						regulator-compatible = "ab8500_ext1";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-boot-on;
-						regulator-always-on;
-					};
-
-					ab8500_ext2_reg: ab8500_ext2 {
-						regulator-compatible = "ab8500_ext2";
-						regulator-min-microvolt = <1360000>;
-						regulator-max-microvolt = <1360000>;
-						regulator-boot-on;
-						regulator-always-on;
-					};
-
-					ab8500_ext3_reg: ab8500_ext3 {
-						regulator-compatible = "ab8500_ext3";
-						regulator-min-microvolt = <3400000>;
-						regulator-max-microvolt = <3400000>;
-						regulator-boot-on;
-					};
-				};
-
-				ab8500-regulators {
-					compatible = "stericsson,ab8500-regulator";
-					vin-supply = <&ab8500_ext3_reg>;
-
-					// supplies to the display/camera
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-compatible = "ab8500_ldo_aux1";
-						regulator-min-microvolt = <2500000>;
-						regulator-max-microvolt = <2900000>;
-						regulator-boot-on;
-						/* BUG: If turned off MMC will be affected. */
-						regulator-always-on;
-					};
-
-					// supplies to the on-board eMMC
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-compatible = "ab8500_ldo_aux2";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					// supply for VAUX3; SDcard slots
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-compatible = "ab8500_ldo_aux3";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					// supply for v-intcore12; VINTCORE12 LDO
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-compatible = "ab8500_ldo_intcore";
-					};
-
-					// supply for tvout; gpadc; TVOUT LDO
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-compatible = "ab8500_ldo_tvout";
-					};
-
-					// supply for ab8500-usb; USB LDO
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-compatible = "ab8500_ldo_usb";
-					};
-
-					// supply for ab8500-vaudio; VAUDIO LDO
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-compatible = "ab8500_ldo_audio";
-					};
-
-					// supply for v-anamic1 VAMIC1 LDO
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-compatible = "ab8500_ldo_anamic1";
-					};
-
-					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-compatible = "ab8500_ldo_anamic2";
-					};
-
-					// supply for v-dmic; VDMIC LDO
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-compatible = "ab8500_ldo_dmic";
-					};
-
-					// supply for U8500 CSI/DSI; VANA LDO
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-compatible = "ab8500_ldo_ana";
-					};
-				};
-			};
-		};
-
-		i2c@80004000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
-			reg = <0x80004000 0x1000>;
-			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
-
-			clock-frequency = <400000>;
-			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
-			clock-names = "i2cclk", "apb_pclk";
-		};
-
-		i2c@80122000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
-			reg = <0x80122000 0x1000>;
-			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
-
-			clock-frequency = <400000>;
-
-			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
-			clock-names = "i2cclk", "apb_pclk";
-		};
-
-		i2c@80128000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
-			reg = <0x80128000 0x1000>;
-			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
-
-			clock-frequency = <400000>;
-
-			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
-			clock-names = "i2cclk", "apb_pclk";
-		};
-
-		i2c@80110000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
-			reg = <0x80110000 0x1000>;
-			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
-
-			clock-frequency = <400000>;
-
-			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
-			clock-names = "i2cclk", "apb_pclk";
-		};
-
-		i2c@8012a000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
-			reg = <0x8012a000 0x1000>;
-			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
-
-			clock-frequency = <400000>;
-
-			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
-			clock-names = "i2cclk", "apb_pclk";
-		};
-
-		ssp@80002000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x80002000 0x1000>;
-			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
-			       <&dma 8 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		ssp@80003000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x80003000 0x1000>;
-			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
-			       <&dma 9 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		spi@8011a000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x8011a000 0x1000>;
-			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Same clock wired to kernel and pclk */
-			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
-			       <&dma 0 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		spi@80112000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x80112000 0x1000>;
-			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Same clock wired to kernel and pclk */
-			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
-			       <&dma 35 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		spi@80111000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x80111000 0x1000>;
-			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Same clock wired to kernel and pclk */
-			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
-			       <&dma 33 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		spi@80129000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x80129000 0x1000>;
-			interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			/* Same clock wired to kernel and pclk */
-			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
-			       <&dma 40 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-		};
-
-		uart@80120000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80120000 0x1000>;
-			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
-			       <&dma 13 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
-			clock-names = "uart", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		uart@80121000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80121000 0x1000>;
-			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
-			       <&dma 12 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
-			clock-names = "uart", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		uart@80007000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x80007000 0x1000>;
-			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
-			       <&dma 11 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
-			clock-names = "uart", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi0_per1@80126000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80126000 0x1000>;
-			interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
-			       <&dma 29 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi1_per2@80118000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80118000 0x1000>;
-			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
-			       <&dma 32 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi2_per3@80005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80005000 0x1000>;
-			interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
-			       <&dma 28 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi3_per2@80119000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80119000 0x1000>;
-			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
-			       <&dma 41 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi4_per2@80114000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80114000 0x1000>;
-			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
-			       <&dma 42 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		sdi5_per3@80008000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x80008000 0x1000>;
-			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
-			       <&dma 43 0 0x0>; /* Logical - MemToDev */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
-			clock-names = "sdi", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		msp0: msp@80123000 {
-			compatible = "stericsson,ux500-msp-i2s";
-			reg = <0x80123000 0x1000>;
-			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
-			v-ape-supply = <&db8500_vape_reg>;
-
-			dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
-			       <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
-			clock-names = "msp", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		msp1: msp@80124000 {
-			compatible = "stericsson,ux500-msp-i2s";
-			reg = <0x80124000 0x1000>;
-			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
-			v-ape-supply = <&db8500_vape_reg>;
-
-			/* This DMA channel only exist on DB8500 v1 */
-			dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
-			dma-names = "tx";
-
-			clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
-			clock-names = "msp", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		// HDMI sound
-		msp2: msp@80117000 {
-			compatible = "stericsson,ux500-msp-i2s";
-			reg = <0x80117000 0x1000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			v-ape-supply = <&db8500_vape_reg>;
-
-			dmas = <&dma 14 0 0x12>, /* Logical  - DevToMem - HighPrio */
-			       <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
-                                                    HighPrio - Fixed */
-			dma-names = "rx", "tx";
-
-			clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
-			clock-names = "msp", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		msp3: msp@80125000 {
-			compatible = "stericsson,ux500-msp-i2s";
-			reg = <0x80125000 0x1000>;
-			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
-			v-ape-supply = <&db8500_vape_reg>;
-
-			/* This DMA channel only exist on DB8500 v2 */
-			dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
-			dma-names = "rx";
-
-			clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
-			clock-names = "msp", "apb_pclk";
-
-			status = "disabled";
-		};
-
-		external-bus@50000000 {
-			compatible = "simple-bus";
-			reg = <0x50000000 0x4000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000000>;
-			status = "disabled";
-		};
-
-		cpufreq-cooling {
-			compatible = "stericsson,db8500-cpufreq-cooling";
-			status = "disabled";
-		};
-
-		vmmci: regulator-gpio {
-			compatible = "regulator-gpio";
-
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2900000>;
-			regulator-name = "mmci-reg";
-			regulator-type = "voltage";
-
-			startup-delay-us = <100>;
-			enable-active-high;
-
-			states = <1800000 0x1
-				  2900000 0x0>;
-
-			status = "disabled";
-		};
-
-		mcde@a0350000 {
-			compatible = "stericsson,mcde";
-			reg = <0xa0350000 0x1000>, /* MCDE */
-			      <0xa0351000 0x1000>, /* DSI link 1 */
-			      <0xa0352000 0x1000>, /* DSI link 2 */
-			      <0xa0353000 0x1000>; /* DSI link 3 */
-			interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
-				 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
-				 <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */
-				 <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */
-				 <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */
-				 <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */
-				 <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */
-				 <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */
-		};
-
-		cryp@a03cb000 {
-			compatible = "stericsson,ux500-cryp";
-			reg = <0xa03cb000 0x1000>;
-			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
-
-			v-ape-supply = <&db8500_vape_reg>;
-			clocks = <&prcc_pclk 6 1>;
-		};
-
-		hash@a03c2000 {
-			compatible = "stericsson,ux500-hash";
-			reg = <0xa03c2000 0x1000>;
-
-			v-ape-supply = <&db8500_vape_reg>;
-			clocks = <&prcc_pclk 6 2>;
-		};
-	};
-};
diff --git a/src/arm/ste-href-ab8500.dtsi b/src/arm/ste-href-ab8500.dtsi
deleted file mode 100644
index 30f8601da323..000000000000
--- a/src/arm/ste-href-ab8500.dtsi
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * Copyright 2014 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/ {
-	soc {
-		prcmu@80157000 {
-			ab8500 {
-				ab8500-gpio {
-					/* Hog a few default settings */
-					pinctrl-names = "default";
-					pinctrl-0 = <&gpio2_default_mode>,
-						    <&gpio4_default_mode>,
-						    <&gpio10_default_mode>,
-						    <&gpio11_default_mode>,
-						    <&gpio12_default_mode>,
-						    <&gpio13_default_mode>,
-						    <&gpio16_default_mode>,
-						    <&gpio24_default_mode>,
-						    <&gpio25_default_mode>,
-						    <&gpio36_default_mode>,
-						    <&gpio37_default_mode>,
-						    <&gpio38_default_mode>,
-						    <&gpio39_default_mode>,
-						    <&gpio42_default_mode>,
-						    <&gpio26_default_mode>,
-						    <&gpio35_default_mode>,
-						    <&ycbcr_default_mode>,
-						    <&pwm_default_mode>,
-						    <&adi1_default_mode>,
-						    <&usbuicc_default_mode>,
-						    <&dmic_default_mode>,
-						    <&extcpena_default_mode>,
-						    <&modsclsda_default_mode>;
-
-					/*
-					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
-					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
-					 */
-					gpio2 {
-						gpio2_default_mode: gpio2_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio2_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO2_T9";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio4 {
-						gpio4_default_mode: gpio4_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio4_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO4_W2";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio10 {
-						gpio10_default_mode: gpio10_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio10_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO10_U17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio11 {
-						gpio11_default_mode: gpio11_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio11_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO11_AA18";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio12 {
-						gpio12_default_mode: gpio12_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio12_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO12_U16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio13 {
-						gpio13_default_mode: gpio13_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio13_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO13_W17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio16 {
-						gpio16_default_mode: gpio16_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio16_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO16_F15";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio24 {
-						gpio24_default_mode: gpio24_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio24_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO24_T14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio25 {
-						gpio25_default_mode: gpio25_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio25_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO25_R16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio36 {
-						gpio36_default_mode: gpio36_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio36_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO36_A17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio37 {
-						gpio37_default_mode: gpio37_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio37_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO37_E15";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio38 {
-						gpio38_default_mode: gpio38_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio38_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO38_C17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio39 {
-						gpio39_default_mode: gpio39_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio39_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO39_E16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio42 {
-						gpio42_default_mode: gpio42_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio42_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO42_U2";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/*
-					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
-					 */
-					gpio26 {
-						gpio26_default_mode: gpio26_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio26_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO26_M16";
-								output-low;
-							};
-						};
-					};
-					gpio35 {
-						gpio35_default_mode: gpio35_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio35_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO35_W15";
-								output-low;
-							};
-						};
-					};
-					/*
-					 * This sets up the YCBCR connector pins, i.e. analog video out.
-					 * Set as input with no bias.
-					 */
-					ycbcr {
-						ycbcr_default_mode: ycbcr_default {
-							default_mux {
-								ste,function = "ycbcr";
-								ste,pins = "ycbcr0123_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO6_Y18",
-									 "GPIO7_AA20",
-									 "GPIO8_W18",
-									 "GPIO9_AA19";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					/* This sets up the PWM pins 14 and 15 */
-					pwm {
-						pwm_default_mode: pwm_default {
-							default_mux {
-								ste,function = "pwmout";
-								ste,pins = "pwmout1_d_1", "pwmout2_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO14_F14",
-									 "GPIO15_B17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up audio interface 1 */
-					adi1 {
-						adi1_default_mode: adi1_default {
-							default_mux {
-								ste,function = "adi1";
-								ste,pins = "adi1_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO17_P5",
-									 "GPIO18_R5",
-									 "GPIO19_U5",
-									 "GPIO20_T5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up the USB UICC pins */
-					usbuicc {
-						usbuicc_default_mode: usbuicc_default {
-							default_mux {
-								ste,function = "usbuicc";
-								ste,pins = "usbuicc_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO21_H19",
-									 "GPIO22_G20",
-									 "GPIO23_G19";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up the microphone pins */
-					dmic {
-						dmic_default_mode: dmic_default {
-							default_mux {
-								ste,function = "dmic";
-								ste,pins = "dmic12_d_1",
-									 "dmic34_d_1",
-									 "dmic56_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO27_J6",
-									 "GPIO28_K6",
-									 "GPIO29_G6",
-									 "GPIO30_H6",
-									 "GPIO31_F5",
-									 "GPIO32_G5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					extcpena {
-						extcpena_default_mode: extcpena_default {
-							default_mux {
-								ste,function = "extcpena";
-								ste,pins = "extcpena_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO34_R17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* Modem I2C setup (SCL and SDA pins) */
-					modsclsda {
-						modsclsda_default_mode: modsclsda_default {
-							default_mux {
-								ste,function = "modsclsda";
-								ste,pins = "modsclsda_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO40_T19",
-									"GPIO41_U19";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/*
-					 * Clock output pins associated with regulators.
-					 */
-					sysclkreq2 {
-						sysclkreq2_default_mode: sysclkreq2_default {
-							default_mux {
-								ste,function = "sysclkreq";
-								ste,pins = "sysclkreq2_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO1_T10";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq2_sleep_mode: sysclkreq2_sleep {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio1_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO1_T10";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					sysclkreq4 {
-						sysclkreq4_default_mode: sysclkreq4_default {
-							default_mux {
-								ste,function = "sysclkreq";
-								ste,pins = "sysclkreq4_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO3_U9";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq4_sleep_mode: sysclkreq4_sleep {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio3_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO3_U9";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-href-ab8505.dtsi b/src/arm/ste-href-ab8505.dtsi
deleted file mode 100644
index 6006d62086a2..000000000000
--- a/src/arm/ste-href-ab8505.dtsi
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Copyright 2014 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/ {
-	soc {
-		prcmu@80157000 {
-			ab8505 {
-				ab8505-gpio {
-					/* Hog a few default settings */
-					pinctrl-names = "default";
-					pinctrl-0 = <&gpio2_default_mode>,
-						    <&gpio10_default_mode>,
-						    <&gpio11_default_mode>,
-						    <&gpio13_default_mode>,
-						    <&gpio34_default_mode>,
-						    <&gpio50_default_mode>,
-						    <&pwm_default_mode>,
-						    <&adi2_default_mode>,
-						    <&modsclsda_default_mode>,
-						    <&resethw_default_mode>,
-						    <&service_default_mode>;
-
-					/*
-					 * Pins 2, 10, 11, 13, 34 and 50
-					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
-					 */
-					gpio2 {
-						gpio2_default_mode: gpio2_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio2_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO2_R5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio10 {
-						gpio10_default_mode: gpio10_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio10_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO10_B16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio11 {
-						gpio11_default_mode: gpio11_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio11_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO11_B17";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio13 {
-						gpio13_default_mode: gpio13_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio13_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO13_D17";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					gpio34 {
-						gpio34_default_mode: gpio34_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio34_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO34_H14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					gpio50 {
-						gpio50_default_mode: gpio50_default {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio50_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO50_L4";
-								input-enable;
-								bias-disable;
-							};
-						};
-					};
-					/* This sets up the PWM pin 14 */
-					pwm {
-						pwm_default_mode: pwm_default {
-							default_mux {
-								ste,function = "pwmout";
-								ste,pins = "pwmout1_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO14_C16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* This sets up audio interface 2 */
-					adi2 {
-						adi2_default_mode: adi2_default {
-							default_mux {
-								ste,function = "adi2";
-								ste,pins = "adi2_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO17_P2",
-									 "GPIO18_N3",
-									 "GPIO19_T1",
-									 "GPIO20_P3";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/* Modem I2C setup (SCL and SDA pins) */
-					modsclsda {
-						modsclsda_default_mode: modsclsda_default {
-							default_mux {
-								ste,function = "modsclsda";
-								ste,pins = "modsclsda_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO40_J15",
-									"GPIO41_J14";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					resethw {
-						resethw_default_mode: resethw_default {
-							default_mux {
-								ste,function = "resethw";
-								ste,pins = "resethw_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO52_D16";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					service {
-						service_default_mode: service_default {
-							default_mux {
-								ste,function = "service";
-								ste,pins = "service_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO53_D15";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					/*
-					 * Clock output pins associated with regulators.
-					 */
-					sysclkreq2 {
-						sysclkreq2_default_mode: sysclkreq2_default {
-							default_mux {
-								ste,function = "sysclkreq";
-								ste,pins = "sysclkreq2_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO1_N4";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq2_sleep_mode: sysclkreq2_sleep {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio1_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO1_N4";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-					sysclkreq4 {
-						sysclkreq4_default_mode: sysclkreq4_default {
-							default_mux {
-								ste,function = "sysclkreq";
-								ste,pins = "sysclkreq4_d_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO3_P5";
-								input-enable;
-								bias-disable;
-							};
-						};
-						sysclkreq4_sleep_mode: sysclkreq4_sleep {
-							default_mux {
-								ste,function = "gpio";
-								ste,pins = "gpio3_a_1";
-							};
-							default_cfg {
-								ste,pins = "GPIO3_P5";
-								input-enable;
-								bias-pull-down;
-							};
-						};
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-href-family-pinctrl.dtsi b/src/arm/ste-href-family-pinctrl.dtsi
deleted file mode 100644
index addfcc7c2750..000000000000
--- a/src/arm/ste-href-family-pinctrl.dtsi
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * Copyright 2013 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "ste-nomadik-pinctrl.dtsi"
-
-/ {
-	soc {
-		pinctrl {
-			/* Settings for all UART default and sleep states */
-			uart0 {
-				uart0_default_mode: uart0_default {
-					default_mux {
-						ste,function = "u0";
-						ste,pins = "u0_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						ste,pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart0_sleep_mode: uart0_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						ste,pins = "GPIO1_AJ3"; /* RTS */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-
-					sleep_cfg3 {
-						ste,pins = "GPIO3_AH3"; /* TXD */
-						ste,config = <&slpm_out_wkup_pdis>;
-					};
-				};
-			};
-
-			uart1 {
-				uart1_default_mode: uart1_default {
-					default_mux {
-						ste,function = "u1";
-						ste,pins = "u1rxtx_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO4_AH6"; /* RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						ste,pins = "GPIO5_AG6"; /* TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart1_sleep_mode: uart1_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO4_AH6"; /* RXD */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						ste,pins = "GPIO5_AG6"; /* TXD */
-						ste,config = <&slpm_out_wkup_pdis>;
-					};
-				};
-			};
-
-			uart2 {
-				uart2_default_mode: uart2_default {
-					default_mux {
-						ste,function = "u2";
-						ste,pins = "u2rxtx_c_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO29_W2"; /* RXD */
-						ste,config = <&in_pu>;
-					};
-
-					default_cfg2 {
-						ste,pins = "GPIO30_W3"; /* TXD */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				uart2_sleep_mode: uart2_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO29_W2"; /* RXD */
-						ste,config = <&in_wkup_pdis>;
-					};
-
-					sleep_cfg2 {
-						ste,pins = "GPIO30_W3"; /* TXD */
-						ste,config = <&out_wkup_pdis>;
-					};
-				};
-			};
-
-			/* Settings for all I2C default and sleep states */
-			i2c0 {
-				i2c0_default_mode: i2c_default {
-					default_mux {
-						ste,function = "i2c0";
-						ste,pins = "i2c0_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c0_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c1 {
-				i2c1_default_mode: i2c_default {
-					default_mux {
-						ste,function = "i2c1";
-						ste,pins = "i2c1_b_2";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c1_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c2 {
-				i2c2_default_mode: i2c_default {
-					default_mux {
-						ste,function = "i2c2";
-						ste,pins = "i2c2_b_2";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c2_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			i2c3 {
-				i2c3_default_mode: i2c_default {
-					default_mux {
-						ste,function = "i2c3";
-						ste,pins = "i2c3_c_2";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c3_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			/*
-			 * Activating I2C4 will conflict with UART1 about the same pins so do not
-			 * enable I2C4 and UART1 at the same time.
-			 */
-			i2c4 {
-				i2c4_default_mode: i2c_default {
-					default_mux {
-						ste,function = "i2c4";
-						ste,pins = "i2c4_b_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				i2c4_sleep_mode: i2c_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			/* Settings for all SPI default and sleep states */
-			spi2 {
-				spi2_default_mode: spi_default {
-					default_mux {
-						ste,function = "spi2";
-						ste,pins = "spi2_oc1_2";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO216_AG12"; /* FRM */
-						ste,config = <&gpio_out_hi>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO218_AH11"; /* RXD */
-						ste,config = <&in_pd>;
-					};
-					default_cfg3 {
-						ste,pins =
-						"GPIO215_AH13", /* TXD */
-						"GPIO217_AH12"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-				};
-
-				spi2_idle_mode: spi_idle {
-					/*
-					 * The idle mode is basically sleep mode sans wakeups. Also
-					 * note that we have muxes the pins off the function here
-					 * as we do not state any muxing.
-					 */
-					idle_cfg1 {
-						ste,pins = "GPIO218_AH11"; /* RXD */
-						ste,config = <&slpm_in_pdis>;
-					};
-					idle_cfg2 {
-						ste,pins = "GPIO215_AH13"; /* TXD */
-						ste,config = <&slpm_out_lo_pdis>;
-					};
-					idle_cfg3 {
-						ste,pins = "GPIO217_AH12"; /* CLK */
-						ste,config = <&slpm_pdis>;
-					};
-				};
-
-				spi2_sleep_mode: spi_sleep {
-					sleep_cfg1 {
-						ste,pins =
-						"GPIO216_AG12", /* FRM */
-						"GPIO218_AH11"; /* RXD */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						ste,pins = "GPIO215_AH13"; /* TXD */
-						ste,config = <&slpm_out_lo_wkup_pdis>;
-					};
-					sleep_cfg3 {
-						ste,pins = "GPIO217_AH12"; /* CLK */
-						ste,config = <&slpm_wkup_pdis>;
-					};
-				};
-			};
-
-			/* Settings for all MMC/SD/SDIO default and sleep states */
-			sdi0 {
-				/* This is the external SD card slot, 4 bits wide */
-				sdi0_default_mode: sdi0_default {
-					default_mux {
-						ste,function = "mc0";
-						ste,pins = "mc0_a_1";
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO18_AC2", /* CMDDIR */
-						"GPIO19_AC1", /* DAT0DIR */
-						"GPIO20_AB4"; /* DAT2DIR */
-						ste,config = <&out_hi>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO22_AA3"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						ste,pins = "GPIO23_AA4"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg4 {
-						ste,pins =
-						"GPIO24_AB2", /* CMD */
-						"GPIO25_Y4", /* DAT0 */
-						"GPIO26_Y2", /* DAT1 */
-						"GPIO27_AA2", /* DAT2 */
-						"GPIO28_AA1"; /* DAT3 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi0_sleep_mode: sdi0_sleep {
-					sleep_cfg1 {
-						ste,pins =
-						"GPIO18_AC2", /* CMDDIR */
-						"GPIO19_AC1", /* DAT0DIR */
-						"GPIO20_AB4"; /* DAT2DIR */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						ste,pins =
-						"GPIO22_AA3", /* FBCLK */
-						"GPIO24_AB2", /* CMD */
-						"GPIO25_Y4", /* DAT0 */
-						"GPIO26_Y2", /* DAT1 */
-						"GPIO27_AA2", /* DAT2 */
-						"GPIO28_AA1"; /* DAT3 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-					sleep_cfg3 {
-						ste,pins = "GPIO23_AA4"; /* CLK */
-						ste,config = <&slpm_out_lo_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi1 {
-				/* This is the WLAN SDIO 4 bits wide */
-				sdi1_default_mode: sdi1_default {
-					default_mux {
-						ste,function = "mc1";
-						ste,pins = "mc1_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO208_AH16"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO209_AG15"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						ste,pins =
-						"GPIO210_AJ15", /* CMD */
-						"GPIO211_AG14", /* DAT0 */
-						"GPIO212_AF13", /* DAT1 */
-						"GPIO213_AG13", /* DAT2 */
-						"GPIO214_AH15"; /* DAT3 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi1_sleep_mode: sdi1_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO208_AH16"; /* CLK */
-						ste,config = <&slpm_out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						ste,pins =
-						"GPIO209_AG15", /* FBCLK */
-						"GPIO210_AJ15", /* CMD */
-						"GPIO211_AG14", /* DAT0 */
-						"GPIO212_AF13", /* DAT1 */
-						"GPIO213_AG13", /* DAT2 */
-						"GPIO214_AH15"; /* DAT3 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi2 {
-				/* This is the eMMC 8 bits wide, usually PoP eMMC */
-				sdi2_default_mode: sdi2_default {
-					default_mux {
-						ste,function = "mc2";
-						ste,pins = "mc2_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO128_A5"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO130_C8"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						ste,pins =
-						"GPIO129_B4", /* CMD */
-						"GPIO131_A12", /* DAT0 */
-						"GPIO132_C10", /* DAT1 */
-						"GPIO133_B10", /* DAT2 */
-						"GPIO134_B9", /* DAT3 */
-						"GPIO135_A9", /* DAT4 */
-						"GPIO136_C7", /* DAT5 */
-						"GPIO137_A7", /* DAT6 */
-						"GPIO138_C5"; /* DAT7 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi2_sleep_mode: sdi2_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO128_A5"; /* CLK */
-						ste,config = <&out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						ste,pins =
-						"GPIO130_C8", /* FBCLK */
-						"GPIO129_B4"; /* CMD */
-						ste,config = <&in_wkup_pdis_en>;
-					};
-					sleep_cfg3 {
-						ste,pins =
-						"GPIO131_A12", /* DAT0 */
-						"GPIO132_C10", /* DAT1 */
-						"GPIO133_B10", /* DAT2 */
-						"GPIO134_B9", /* DAT3 */
-						"GPIO135_A9", /* DAT4 */
-						"GPIO136_C7", /* DAT5 */
-						"GPIO137_A7", /* DAT6 */
-						"GPIO138_C5"; /* DAT7 */
-						ste,config = <&in_wkup_pdis>;
-					};
-				};
-			};
-
-			sdi4 {
-				/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
-				sdi4_default_mode: sdi4_default {
-					default_mux {
-						ste,function = "mc4";
-						ste,pins = "mc4_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO203_AE23"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO202_AF25"; /* FBCLK */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg3 {
-						ste,pins =
-						"GPIO201_AF24", /* CMD */
-						"GPIO200_AH26", /* DAT0 */
-						"GPIO199_AH23", /* DAT1 */
-						"GPIO198_AG25", /* DAT2 */
-						"GPIO197_AH24", /* DAT3 */
-						"GPIO207_AJ23", /* DAT4 */
-						"GPIO206_AG24", /* DAT5 */
-						"GPIO205_AG23", /* DAT6 */
-						"GPIO204_AF23"; /* DAT7 */
-						ste,config = <&in_pu>;
-					};
-				};
-
-				sdi4_sleep_mode: sdi4_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO203_AE23"; /* CLK */
-						ste,config = <&out_lo_wkup_pdis>;
-					};
-					sleep_cfg2 {
-						ste,pins =
-						"GPIO202_AF25", /* FBCLK */
-						"GPIO201_AF24", /* CMD */
-						"GPIO200_AH26", /* DAT0 */
-						"GPIO199_AH23", /* DAT1 */
-						"GPIO198_AG25", /* DAT2 */
-						"GPIO197_AH24", /* DAT3 */
-						"GPIO207_AJ23", /* DAT4 */
-						"GPIO206_AG24", /* DAT5 */
-						"GPIO205_AG23", /* DAT6 */
-						"GPIO204_AF23"; /* DAT7 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			/*
-			 * Multi-rate serial ports (MSPs) - MSP3 output is internal and
-			 * cannot be muxed onto any pins.
-			 */
-			msp0 {
-				msp0_default_mode: msp0_default {
-					default_msp0_mux {
-						ste,function = "msp0";
-						ste,pins = "msp0txrx_a_1", "msp0tfstck_a_1";
-					};
-					default_msp0_cfg {
-						ste,pins =
-						"GPIO12_AC4", /* TXD */
-						"GPIO15_AC3", /* RXD */
-						"GPIO13_AF3", /* TFS */
-						"GPIO14_AE3"; /* TCK */
-						ste,config = <&in_nopull>;
-					};
-				};
-			};
-
-			msp1 {
-				msp1_default_mode: msp1_default {
-					default_mux {
-						ste,function = "msp1";
-						ste,pins = "msp1txrx_a_1", "msp1_a_1";
-					};
-					default_cfg1 {
-						ste,pins = "GPIO33_AF2";
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						ste,pins =
-						"GPIO34_AE1",
-						"GPIO35_AE2",
-						"GPIO36_AG2";
-						ste,config = <&in_nopull>;
-					};
-
-				};
-			};
-
-			msp2 {
-				msp2_default_mode: msp2_default {
-					/* MSP2 usually used for HDMI audio */
-					default_mux {
-						ste,function = "msp2";
-						ste,pins = "msp2_a_1";
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO193_AH27", /* TXD */
-						"GPIO194_AF27", /* TCK */
-						"GPIO195_AG28"; /* TFS */
-						ste,config = <&in_pd>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO196_AG26"; /* RXD */
-						ste,config = <&out_lo>;
-					};
-				};
-			};
-
-
-			musb {
-				musb_default_mode: musb_default {
-					default_mux {
-						ste,function = "usb";
-						ste,pins = "usb_a_1";
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO256_AF28", /* NXT */
-						"GPIO258_AD29", /* XCLK */
-						"GPIO259_AC29", /* DIR */
-						"GPIO260_AD28", /* DAT7 */
-						"GPIO261_AD26", /* DAT6 */
-						"GPIO262_AE26", /* DAT5 */
-						"GPIO263_AG29", /* DAT4 */
-						"GPIO264_AE27", /* DAT3 */
-						"GPIO265_AD27", /* DAT2 */
-						"GPIO266_AC28", /* DAT1 */
-						"GPIO267_AC27"; /* DAT0 */
-						ste,config = <&in_nopull>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO257_AE29"; /* STP */
-						ste,config = <&out_hi>;
-					};
-				};
-
-				musb_sleep_mode: musb_sleep {
-					sleep_cfg1 {
-						ste,pins =
-						"GPIO256_AF28", /* NXT */
-						"GPIO258_AD29", /* XCLK */
-						"GPIO259_AC29"; /* DIR */
-						ste,config = <&slpm_wkup_pdis_en>;
-					};
-					sleep_cfg2 {
-						ste,pins = "GPIO257_AE29"; /* STP */
-						ste,config = <&slpm_out_hi_wkup_pdis>;
-					};
-					sleep_cfg3 {
-						ste,pins =
-						"GPIO260_AD28", /* DAT7 */
-						"GPIO261_AD26", /* DAT6 */
-						"GPIO262_AE26", /* DAT5 */
-						"GPIO263_AG29", /* DAT4 */
-						"GPIO264_AE27", /* DAT3 */
-						"GPIO265_AD27", /* DAT2 */
-						"GPIO266_AC28", /* DAT1 */
-						"GPIO267_AC27"; /* DAT0 */
-						ste,config = <&slpm_in_wkup_pdis_en>;
-					};
-				};
-			};
-
-			mcde {
-				lcd_default_mode: lcd_default {
-					default_mux {
-						/* Mux in VSI0 and all the data lines */
-						ste,function = "lcd";
-						ste,pins =
-						"lcdvsi0_a_1", /* VSI0 for LCD */
-						"lcd_d0_d7_a_1", /* Data lines */
-						"lcd_d8_d11_a_1", /* TV-out */
-						"lcdaclk_b_1", /* Clock line for TV-out */
-						"lcdvsi1_a_1"; /* VSI1 for HDMI */
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO68_E1", /* VSI0 */
-						"GPIO69_E2"; /* VSI1 */
-						ste,config = <&in_pu>;
-					};
-				};
-				lcd_sleep_mode: lcd_sleep {
-					sleep_cfg1 {
-						ste,pins = "GPIO69_E2"; /* VSI1 */
-						ste,config = <&slpm_in_wkup_pdis>;
-					};
-				};
-			};
-
-			ske {
-				/* SKE keys on position 2 in an 8x8 matrix */
-				ske_kpa2_default_mode: ske_kpa2_default {
-					default_mux {
-						ste,function = "kp";
-						ste,pins = "kp_a_2";
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO153_B17", /* I7 */
-						"GPIO154_C16", /* I6 */
-						"GPIO155_C19", /* I5 */
-						"GPIO156_C17", /* I4 */
-						"GPIO161_D21", /* I3 */
-						"GPIO162_D20", /* I2 */
-						"GPIO163_C20", /* I1 */
-						"GPIO164_B21"; /* I0 */
-						ste,config = <&in_pd>;
-					};
-					default_cfg2 {
-						ste,pins =
-						"GPIO157_A18", /* O7 */
-						"GPIO158_C18", /* O6 */
-						"GPIO159_B19", /* O5 */
-						"GPIO160_B20", /* O4 */
-						"GPIO165_C21", /* O3 */
-						"GPIO166_A22", /* O2 */
-						"GPIO167_B24", /* O1 */
-						"GPIO168_C22"; /* O0 */
-						ste,config = <&out_lo>;
-					};
-				};
-				ske_kpa2_sleep_mode: ske_kpa2_sleep {
-					sleep_cfg1 {
-						ste,pins =
-						"GPIO153_B17", /* I7 */
-						"GPIO154_C16", /* I6 */
-						"GPIO155_C19", /* I5 */
-						"GPIO156_C17", /* I4 */
-						"GPIO161_D21", /* I3 */
-						"GPIO162_D20", /* I2 */
-						"GPIO163_C20", /* I1 */
-						"GPIO164_B21"; /* I0 */
-						ste,config = <&slpm_in_pu_wkup_pdis_en>;
-					};
-					sleep_cfg2 {
-						ste,pins =
-						"GPIO157_A18", /* O7 */
-						"GPIO158_C18", /* O6 */
-						"GPIO159_B19", /* O5 */
-						"GPIO160_B20", /* O4 */
-						"GPIO165_C21", /* O3 */
-						"GPIO166_A22", /* O2 */
-						"GPIO167_B24", /* O1 */
-						"GPIO168_C22"; /* O0 */
-						ste,config = <&slpm_out_lo_pdis>;
-					};
-				};
-				/*
-				 * SKE keys on position 1 and "other C1" combi giving
-				 * six rows of six keys.
-				 */
-				ske_kpaoc1_default_mode: ske_kpaoc1_default {
-					default_mux {
-						ste,function = "kp";
-						ste,pins = "kp_a_1", "kp_oc1_1";
-					};
-					default_cfg1 {
-						ste,pins =
-						"GPIO91_B6", /* KP_O0 */
-						"GPIO90_A3", /* KP_O1 */
-						"GPIO87_B3", /* KP_O2 */
-						"GPIO86_C6", /* KP_O3 */
-						"GPIO96_D8", /* KP_O6 */
-						"GPIO94_D7"; /* KP_O7 */
-						ste,config = <&out_lo>;
-					};
-					default_cfg2 {
-						ste,pins =
-						"GPIO93_B7", /* KP_I0 */
-						"GPIO92_D6", /* KP_I1 */
-						"GPIO89_E6", /* KP_I2 */
-						"GPIO88_C4", /* KP_I3 */
-						"GPIO97_D9", /* KP_I6 */
-						"GPIO95_E8"; /* KP_I7 */
-						ste,config = <&in_pu>;
-					};
-				};
-			};
-
-			wlan {
-				wlan_default_mode: wlan_default {
-					/*
-					 * Activate this mode with the WLAN chip.
-					 * These are plain GPIO pins used by WLAN
-					 */
-					default_cfg1 {
-						ste,pins =
-						"GPIO226_AF8", /* WLAN_PMU_EN */
-						"GPIO85_D5"; /* WLAN_ENA */
-						ste,config = <&gpio_out_lo>;
-					};
-					default_cfg2 {
-						ste,pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-href-stuib.dtsi b/src/arm/ste-href-stuib.dtsi
deleted file mode 100644
index 84d7c5d883f2..000000000000
--- a/src/arm/ste-href-stuib.dtsi
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		vdd-supply = <&ab8500_ldo_aux1_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>;
-
-		button@139 {
-			/* Proximity sensor */
-			gpios = <&gpio6 25 0x4>;
-			linux,code = <11>; /* SW_FRONT_PROXIMITY */
-			label = "SFH7741 Proximity Sensor";
-		};
-		button@145 {
-			/* Hall sensor */
-			gpios = <&gpio4 17 0x4>;
-			linux,code = <0>; /* SW_LID */
-			label = "HED54XXU11 Hall Effect Sensor";
-		};
-	};
-
-	soc {
-		i2c@80004000 {
-			stmpe1601: stmpe1601@40 {
-				compatible = "st,stmpe1601";
-				reg = <0x40>;
-				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
-				interrupt-parent = <&gpio6>;
-				interrupt-controller;
-				vcc-supply = <&db8500_vsmps2_reg>;
-				vio-supply = <&db8500_vsmps2_reg>;
-
-				wakeup-source;
-				st,autosleep-timeout = <1024>;
-
-				stmpe_keypad {
-					compatible = "st,stmpe-keypad";
-
-					debounce-interval = <64>;
-					st,scan-count = <8>;
-					st,no-autorepeat;
-
-					linux,keymap = <0x205006b
-							0x4010074
-							0x3050072
-							0x1030004
-							0x502006a
-							0x500000a
-							0x5008b
-							0x706001c
-							0x405000b
-							0x6070003
-							0x3040067
-							0x303006c
-							0x60400e7
-							0x602009e
-							0x4020073
-							0x5050002
-							0x4030069
-							0x3020008>;
-				};
-			};
-		};
-
-		i2c@80110000 {
-			bu21013_tp@5c {
-				compatible = "rohm,bu21013_tp";
-				reg = <0x5c>;
-				avdd-supply = <&ab8500_ldo_aux1_reg>;
-
-				rohm,touch-max-x = <384>;
-				rohm,touch-max-y = <704>;
-				rohm,flip-y;
-			};
-
-			bu21013_tp@5d {
-				compatible = "rohm,bu21013_tp";
-				reg = <0x5d>;
-				avdd-supply = <&ab8500_ldo_aux1_reg>;
-
-				rohm,touch-max-x = <384>;
-				rohm,touch-max-y = <704>;
-				rohm,flip-y;
-			};
-		};
-
-		pinctrl {
-			prox {
-				prox_stuib_mode: prox_stuib {
-					stuib_cfg {
-						ste,pins = "GPIO217_AH12";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			hall {
-				hall_stuib_mode: stuib_tvk {
-					stuib_cfg {
-						ste,pins = "GPIO145_C13";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-href-tvk1281618.dtsi b/src/arm/ste-href-tvk1281618.dtsi
deleted file mode 100644
index 18b65d1b14f2..000000000000
--- a/src/arm/ste-href-tvk1281618.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Device Tree for the TVK1281618 UIB
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		vdd-supply = <&ab8500_ldo_aux1_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>;
-
-		button@139 {
-			/* Proximity sensor */
-			gpios = <&gpio6 25 0x4>;
-			linux,code = <11>; /* SW_FRONT_PROXIMITY */
-			label = "SFH7741 Proximity Sensor";
-		};
-		button@145 {
-			/* Hall sensor */
-			gpios = <&gpio4 17 0x4>;
-			linux,code = <0>; /* SW_LID */
-			label = "HED54XXU11 Hall Effect Sensor";
-		};
-	};
-
-	soc {
-		/* Add Synaptics touch screen, TC35893 keypad etc here */
-		i2c@80004000 {
-			tc35893@44 {
-				compatible = "toshiba,tc35893";
-				reg = <0x44>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&tc35893_tvk_mode>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-
-				tc3589x_gpio {
-					compatible = "toshiba,tc3589x-gpio";
-					interrupts = <0>;
-
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-				tc3589x_keypad {
-					compatible = "toshiba,tc3589x-keypad";
-					interrupts = <6>;
-					debounce-delay-ms = <4>;
-					keypad,num-columns = <8>;
-					keypad,num-rows = <8>;
-					linux,no-autorepeat;
-					linux,wakeup;
-					linux,keymap = <0x0301006b
-						        0x04010066
-							0x06040072
-							0x040200d7
-							0x0303006a
-							0x0205000e
-							0x0607008b
-							0x0500001c
-							0x0403000b
-							0x03040034
-							0x05020067
-							0x0305006c
-							0x040500e7
-							0x0005009e
-							0x06020073
-							0x01030039
-							0x07060069
-							0x050500d9>;
-				};
-			};
-		};
-		/* Sensors mounted on this board variant */
-		i2c@80128000 {
-			lsm303dlh@18 {
-				/* Accelerometer */
-				compatible = "st,lsm303dlh-accel";
-				st,drdy-int-pin = <1>;
-				reg = <0x18>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&accel_tvk_mode>;
-			};
-			lsm303dlm@1e {
-				/* Magnetometer */
-				compatible = "st,lsm303dlm-magn";
-				reg = <0x1e>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&magneto_tvk_mode>;
-			};
-			l3g4200d@68 {
-				/* Gyroscope */
-				compatible = "st,l3g4200d-gyro";
-				st,drdy-int-pin = <2>;
-				reg = <0x68>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-			};
-			lsp001wm@5c {
-				/* Barometer/pressure sensor */
-				compatible = "st,lps001wp-press";
-				reg = <0x5c>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-			};
-		};
-		pinctrl {
-			/* Pull up this GPIO pin */
-			tc35893 {
-				tc35893_tvk_mode: tc35893_tvk {
-					tvk_cfg {
-						ste,pins = "GPIO218_AH11";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			prox {
-				prox_tvk_mode: prox_tvk {
-					tvk_cfg {
-						ste,pins = "GPIO217_AH12";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			hall {
-				hall_tvk_mode: hall_tvk {
-					tvk_cfg {
-						ste,pins = "GPIO145_C13";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			accelerometer {
-				accel_tvk_mode: accel_tvk {
-					/* Accelerometer interrupt lines 1 & 2 */
-					tvk_cfg {
-						ste,pins = "GPIO82_C1", "GPIO83_D3";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			magnetometer {
-				magneto_tvk_mode: magneto_tvk {
-					/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
-					tvk_cfg1 {
-						ste,pins = "GPIO31_V3";
-						ste,config = <&gpio_in_pu>;
-					};
-					tvk_cfg2 {
-						ste,pins = "GPIO32_V2";
-						ste,config = <&gpio_in_pd>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-href.dtsi b/src/arm/ste-href.dtsi
deleted file mode 100644
index bf8f0eddc2c0..000000000000
--- a/src/arm/ste-href.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "ste-dbx5x0.dtsi"
-#include "ste-href-family-pinctrl.dtsi"
-
-/ {
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	soc {
-		usb_per5@a03e0000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&musb_default_mode>;
-			pinctrl-1 = <&musb_sleep_mode>;
-		};
-
-		uart@80120000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80121000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart1_default_mode>;
-			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80007000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
-			status = "okay";
-		};
-
-		i2c@80004000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
-		};
-
-		i2c@80122000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
-		};
-
-		i2c@80128000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
-			lp5521@33 {
-				compatible = "national,lp5521";
-				reg = <0x33>;
-				label = "lp5521_pri";
-				clock-mode = /bits/ 8 <2>;
-				chan0 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-					linux,default-trigger = "heartbeat";
-				};
-				chan1 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-				};
-				chan2 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-				};
-			};
-			lp5521@34 {
-				compatible = "national,lp5521";
-				reg = <0x34>;
-				label = "lp5521_sec";
-				clock-mode = /bits/ 8 <2>;
-				chan0 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-				};
-				chan1 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-				};
-				chan2 {
-					led-cur = /bits/ 8 <0x2f>;
-					max-cur = /bits/ 8 <0x5f>;
-				};
-			};
-			bh1780@29 {
-				compatible = "rohm,bh1780gli";
-				reg = <0x29>;
-			};
-		};
-
-		i2c@80110000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c3_default_mode>;
-			pinctrl-1 = <&i2c3_sleep_mode>;
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			full-pwr-cycle;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-cmd;
-			st,sig-pin-fbclk;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-			vqmmc-supply = <&vmmci>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi0_default_mode>;
-			pinctrl-1 = <&sdi0_sleep_mode>;
-
-			status = "okay";
-		};
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			non-removable;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi1_default_mode>;
-			pinctrl-1 = <&sdi1_sleep_mode>;
-
-			status = "okay";
-		};
-
-		// PoP:ed eMMC
-		sdi2_per3@80005000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <8>;
-			cap-mmc-highspeed;
-			non-removable;
-			vmmc-supply = <&db8500_vsmps2_reg>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi2_default_mode>;
-			pinctrl-1 = <&sdi2_sleep_mode>;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			cap-mmc-highspeed;
-			non-removable;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi4_default_mode>;
-			pinctrl-1 = <&sdi4_sleep_mode>;
-
-			status = "okay";
-		};
-
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-		};
-
-		msp0: msp@80123000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp0_default_mode>;
-			status = "okay";
-		};
-
-		msp1: msp@80124000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp1_default_mode>;
-			status = "okay";
-		};
-
-		msp2: msp@80117000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp2_default_mode>;
-		};
-
-		msp3: msp@80125000 {
-			status = "okay";
-		};
-
-		prcmu@80157000 {
-			ab8500 {
-				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
-				};
-
-				ab8500-regulators {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-name = "dummy";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
-		mcde@a0350000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&lcd_default_mode>;
-			pinctrl-1 = <&lcd_sleep_mode>;
-		};
-	};
-};
diff --git a/src/arm/ste-hrefprev60-stuib.dts b/src/arm/ste-hrefprev60-stuib.dts
deleted file mode 100644
index 2b1cb5b584b6..000000000000
--- a/src/arm/ste-hrefprev60-stuib.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-hrefprev60.dtsi"
-#include "ste-href-stuib.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
-	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-
-	soc {
-		/* Reset line for the BU21013 touchscreen */
-		i2c@80110000 {
-			/* Only one of these will be used */
-			bu21013_tp@5c {
-				touch-gpio = <&gpio2 12 0x4>;
-				reset-gpio = <&tc3589x_gpio 13 0x4>;
-			};
-			bu21013_tp@5d {
-				touch-gpio = <&gpio2 12 0x4>;
-				reset-gpio = <&tc3589x_gpio 13 0x4>;
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-hrefprev60-tvk.dts b/src/arm/ste-hrefprev60-tvk.dts
deleted file mode 100644
index 59523f866812..000000000000
--- a/src/arm/ste-hrefprev60-tvk.dts
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-hrefprev60.dtsi"
-#include "ste-href-tvk1281618.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
-	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
-};
diff --git a/src/arm/ste-hrefprev60.dtsi b/src/arm/ste-hrefprev60.dtsi
deleted file mode 100644
index abc762e24fcb..000000000000
--- a/src/arm/ste-hrefprev60.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Device Tree for the HREF+ prior to the v60 variant.
- */
-
-#include "ste-dbx5x0.dtsi"
-#include "ste-href-ab8500.dtsi"
-#include "ste-href.dtsi"
-
-/ {
-	gpio_keys {
-		button@1 {
-			gpios = <&tc3589x_gpio 7 0x4>;
-		};
-	};
-
-	soc {
-		i2c@80004000 {
-			tps61052@33 {
-				compatible = "tps61052";
-				reg = <0x33>;
-			};
-
-			tc35892@42 {
-				compatible = "toshiba,tc35892";
-				reg = <0x42>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&tc35892_hrefprev60_mode>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-
-				tc3589x_gpio: tc3589x_gpio {
-					compatible = "tc3589x-gpio";
-					interrupts = <0>;
-
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-		};
-
-		ssp@80002000 {
-			/*
-			 * On the first generation boards, this SSP/SPI port was connected
-			 * to the AB8500.
-			 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&ssp0_hrefprev60_mode>;
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			cd-gpios  = <&tc3589x_gpio 3 0x4>;
-		};
-
-		vmmci: regulator-gpio {
-			gpios = <&tc3589x_gpio 18 0x4>;
-			enable-gpio = <&tc3589x_gpio 17 0x4>;
-		};
-
-		pinctrl {
-			/* Set this up using hogs */
-			pinctrl-names = "default";
-			pinctrl-0 = <&ipgpio_hrefprev60_mode>;
-
-			ssp0 {
-				ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
-					hrefprev60_mux {
-						ste,function = "ssp0";
-						ste,pins = "ssp0_a_1";
-					};
-					hrefprev60_cfg1 {
-						ste,pins = "GPIO145_C13"; /* RXD */
-						ste,config = <&in_pd>;
-					};
-
-				};
-			};
-			sdi0 {
-				/* This additional pin needed on early MOP500 and HREFs previous to v60 */
-				sdi0_default_mode: sdi0_default {
-					hrefprev60_mux {
-						ste,function = "mc0";
-						ste,pins = "mc0dat31dir_a_1";
-					};
-					hrefprev60_cfg1 {
-						ste,pins = "GPIO21_AB3"; /* DAT31DIR */
-						ste,config = <&out_hi>;
-					};
-
-				};
-			};
-			tc35892 {
-				tc35892_hrefprev60_mode: tc35892_hrefprev60 {
-					hrefprev60_cfg {
-						ste,pins = "GPIO217_AH12";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			ipgpio {
-				 ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
-					hrefprev60_mux {
-						ste,function = "ipgpio";
-						ste,pins = "ipgpio0_c_1", "ipgpio1_c_1";
-					};
-					hrefprev60_cfg1 {
-						ste,pins = "GPIO6_AF6", "GPIO7_AG5";
-						ste,config = <&in_pu>;
-					};
-				 };
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-hrefv60plus-stuib.dts b/src/arm/ste-hrefv60plus-stuib.dts
deleted file mode 100644
index 8c6a2de56cf1..000000000000
--- a/src/arm/ste-hrefv60plus-stuib.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Device Tree for the HREF version 60 or later with the ST UIB
- */
-
-/dts-v1/;
-#include "ste-hrefv60plus.dtsi"
-#include "ste-href-stuib.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (v60+) and ST UIB";
-	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
-	soc {
-		/* Reset line for the BU21013 touchscreen */
-		i2c@80110000 {
-			/* Only one of these will be used */
-			bu21013_tp@5c {
-				touch-gpio = <&gpio2 20 0x4>;
-				reset-gpio = <&gpio4 17 0x4>;
-			};
-			bu21013_tp@5d {
-				touch-gpio = <&gpio2 20 0x4>;
-				reset-gpio = <&gpio4 17 0x4>;
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-hrefv60plus-tvk.dts b/src/arm/ste-hrefv60plus-tvk.dts
deleted file mode 100644
index d53cccdce776..000000000000
--- a/src/arm/ste-hrefv60plus-tvk.dts
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Device Tree for the HREF version 60 or later with the TVK1281618 UIB
- */
-
-/dts-v1/;
-#include "ste-hrefv60plus.dtsi"
-#include "ste-href-tvk1281618.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
-	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-};
diff --git a/src/arm/ste-hrefv60plus.dtsi b/src/arm/ste-hrefv60plus.dtsi
deleted file mode 100644
index bcc1f0c37f49..000000000000
--- a/src/arm/ste-hrefv60plus.dtsi
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "ste-dbx5x0.dtsi"
-#include "ste-href-ab8500.dtsi"
-#include "ste-href.dtsi"
-
-/ {
-	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
-	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
-
-	soc {
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			cd-gpios  = <&gpio2 31 0x4>; // 95
-		};
-
-		vmmci: regulator-gpio {
-			gpios = <&gpio0 5 0x4>;
-			enable-gpio = <&gpio5 9 0x4>;
-		};
-
-		pinctrl {
-			/*
-			 * Set this up using hogs, as time goes by and as seems fit, these
-			 * can be moved over to being controlled by respective device.
-			 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&ipgpio_hrefv60_mode>,
-				  <&etm_hrefv60_mode>,
-				  <&nahj_hrefv60_mode>,
-				  <&nfc_hrefv60_mode>,
-				  <&force_hrefv60_mode>,
-				  <&dipro_hrefv60_mode>,
-				  <&vaudio_hf_hrefv60_mode>,
-				  <&gbf_hrefv60_mode>,
-				  <&hdtv_hrefv60_mode>,
-				  <&touch_hrefv60_mode>;
-
-			sdi0 {
-				/* SD card detect GPIO pin, extend default state */
-				sdi0_default_mode: sdi0_default {
-					default_hrefv60_cfg1 {
-						ste,pins = "GPIO95_E8";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			ipgpio {
-				/*
-				 * XENON Flashgun on image processor GPIO (controlled from image
-				 * processor firmware), mux in these image processor GPIO lines 0
-				 * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
-				 * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
-				 * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
-				 */
-				ipgpio_hrefv60_mode: ipgpio_hrefv60 {
-					hrefv60_mux {
-						ste,function = "ipgpio";
-						ste,pins = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
-					};
-					hrefv60_cfg1 {
-						ste,pins = "GPIO6_AF6", "GPIO7_AG5";
-						ste,config = <&in_pu>;
-					};
-					hrefv60_cfg2 {
-						ste,pins = "GPIO21_AB3";
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg3 {
-						ste,pins = "GPIO64_F3";
-						ste,config = <&out_lo>;
-					};
-				};
-			};
-			etm {
-				/*
-				 * Drive D19-D23 for the ETM PTM trace interface low,
-				 * (presumably pins are unconnected therefore grounded here,
-				 * the "other alt C1" setting enables these pins)
-				 */
-				etm_hrefv60_mode: etm_hrefv60 {
-					hrefv60_cfg1 {
-						ste,pins =
-						"GPIO70_G5",
-						"GPIO71_G4",
-						"GPIO72_H4",
-						"GPIO73_H3",
-						"GPIO74_J3";
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			nahj {
-				nahj_hrefv60_mode: nahj_hrefv60 {
-					/* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */
-					hrefv60_cfg1 {
-						ste,pins = "GPIO76_J2";
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg2 {
-						ste,pins = "GPIO216_AG12";
-						ste,config = <&gpio_out_hi>;
-					};
-				 };
-			};
-			nfc {
-				nfc_hrefv60_mode: nfc_hrefv60 {
-					/* NFC ENA and RESET to low, pulldown IRQ line */
-					hrefv60_cfg1 {
-						ste,pins =
-						"GPIO77_H1", /* NFC_ENA */
-						"GPIO142_C11"; /* NFC_RESET */
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg2 {
-						ste,pins = "GPIO144_B13"; /* NFC_IRQ */
-						ste,config = <&gpio_in_pd>;
-					};
-				 };
-			};
-			force {
-				force_hrefv60_mode: force_hrefv60 {
-					hrefv60_cfg1 {
-						ste,pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
-						ste,config = <&gpio_in_pu>;
-					};
-					hrefv60_cfg2 {
-						ste,pins =
-						"GPIO92_D6", /* FORCE_SENSING_RST */
-						"GPIO97_D9"; /* FORCE_SENSING_WU */
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			dipro {
-				dipro_hrefv60_mode: dipro_hrefv60 {
-					hrefv60_cfg1 {
-						ste,pins = "GPIO139_C9"; /* DIPRO_INT */
-						ste,config = <&gpio_in_pu>;
-					};
-				 };
-			};
-			vaudio_hf {
-				vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 {
-					/* Audio Amplifier HF enable GPIO */
-					hrefv60_cfg1 {
-						ste,pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
-						ste,config = <&gpio_out_hi>;
-					};
-				 };
-			};
-			gbf {
-				gbf_hrefv60_mode: gbf_hrefv60 {
-					/*
-					 * GBF (GPS, Bluetooth, FM-radio) interface,
-					 * pull low to reset state
-					 */
-					hrefv60_cfg1 {
-						ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			hdtv {
-				hdtv_hrefv60_mode: hdtv_hrefv60 {
-					/* MSP : HDTV INTERFACE GPIO line */
-					hrefv60_cfg1 {
-						ste,pins = "GPIO192_AJ27";
-						ste,config = <&gpio_in_pd>;
-					};
-				 };
-			};
-			touch {
-				touch_hrefv60_mode: touch_hrefv60 {
-					/*
-					 * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
-					 * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
-					 * reset signals low.
-					 */
-					hrefv60_cfg1 {
-						ste,pins = "GPIO143_D12", "GPIO146_D13";
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg2 {
-						ste,pins = "GPIO67_G2";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			mcde {
-				lcd_hrefv60_mode: lcd_hrefv60 {
-					/*
-					 * Display Interface 1 uses GPIO 65 for RST (reset).
-					 * Display Interface 2 uses GPIO 66 for RST (reset).
-					 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
-					 */
-					hrefv60_cfg1 {
-						ste,pins ="GPIO65_F1";
-						ste,config = <&gpio_out_hi>;
-					};
-					hrefv60_cfg2 {
-						ste,pins ="GPIO66_G3";
-						ste,config = <&gpio_out_lo>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/ste-nomadik-pinctrl.dtsi b/src/arm/ste-nomadik-pinctrl.dtsi
deleted file mode 100644
index e6f22b266420..000000000000
--- a/src/arm/ste-nomadik-pinctrl.dtsi
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <dt-bindings/pinctrl/nomadik.h>
-
-/ {
-	in_nopull: in_nopull {
-		ste,input = <INPUT_NOPULL>;
-	};
-
-	in_pu: input_pull_up {
-		ste,input = <INPUT_PULLUP>;
-	};
-
-	in_pd: input_pull_down {
-		ste,input = <INPUT_PULLDOWN>;
-	};
-
-	out_hi: output_high {
-		ste,output = <OUTPUT_HIGH>;
-	};
-
-	out_lo: output_low {
-		ste,output = <OUTPUT_LOW>;
-	};
-
-	gpio_in_pu: gpio_input_pull_up {
-		ste,gpio = <GPIOMODE_ENABLED>;
-		ste,input = <INPUT_PULLUP>;
-	};
-
-	gpio_in_pd: gpio_input_pull_down {
-		ste,gpio = <GPIOMODE_ENABLED>;
-		ste,input = <INPUT_PULLDOWN>;
-	};
-
-	gpio_out_lo: gpio_output_low {
-		ste,gpio = <GPIOMODE_ENABLED>;
-		ste,output = <OUTPUT_LOW>;
-	};
-
-	gpio_out_hi: gpio_output_high {
-		ste,gpio = <GPIOMODE_ENABLED>;
-		ste,output = <OUTPUT_HIGH>;
-	};
-
-	slpm_pdis: slpm_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_wkup_pdis: slpm_wkup_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_wkup_pdis_en: slpm_wkup_pdis_en {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
-	};
-
-	slpm_in_pu: slpm_in_pu {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-input = <SLPM_INPUT_PULLUP>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-	};
-
-	slpm_in_pdis: slpm_in_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-input = <SLPM_DIR_INPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_in_wkup_pdis: slpm_in_wkup_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-input = <SLPM_DIR_INPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_in_wkup_pdis_en: slpm_in_wkup_pdis_en {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-input = <SLPM_DIR_INPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
-	};
-
-	slpm_in_pu_wkup_pdis_en: slpm_in_wkup_pdis_en {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-input = <SLPM_INPUT_PULLUP>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
-	};
-
-	slpm_out_lo: slpm_out_lo {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_OUTPUT_LOW>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-	};
-
-	slpm_out_hi: slpm_out_hi {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-	};
-
-	slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_out_lo_pdis: slpm_out_lo_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_OUTPUT_LOW>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_OUTPUT_LOW>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	slpm_out_wkup_pdis: slpm_out_wkup_pdis {
-		ste,sleep = <SLPM_ENABLED>;
-		ste,sleep-output = <SLPM_DIR_OUTPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	in_wkup_pdis: in_wkup_pdis {
-		ste,sleep-input = <SLPM_DIR_INPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	in_wkup_pdis_en: in_wkup_pdis_en {
-		ste,sleep-input = <SLPM_DIR_INPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
-	};
-
-	out_lo_wkup_pdis: out_lo_wkup_pdis {
-		ste,sleep-output = <SLPM_OUTPUT_LOW>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	out_hi_wkup_pdis: out_hi_wkup_pdis {
-		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-
-	out_wkup_pdis: out_wkup_pdis {
-		ste,sleep-output = <SLPM_DIR_OUTPUT>;
-		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
-		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
-	};
-};
diff --git a/src/arm/ste-nomadik-s8815.dts b/src/arm/ste-nomadik-s8815.dts
deleted file mode 100644
index 90d8b6c7a205..000000000000
--- a/src/arm/ste-nomadik-s8815.dts
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Device Tree for the ST-Ericsson Nomadik S8815 board
- * Produced by Calao Systems
- */
-
-/dts-v1/;
-#include "ste-nomadik-stn8815.dtsi"
-
-/ {
-	model = "Calao Systems USB-S8815";
-	compatible = "calaosystems,usb-s8815";
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
-	};
-
-	/* This is where the interrupt is routed on the S8815 board */
-	external-bus@34000000 {
-		ethernet@300 {
-			interrupt-parent = <&gpio3>;
-			interrupts = <8 0x1>;
-		};
-	};
-
-	src@101e0000 {
-		/* These chrystal drivers are not used on this board */
-		disable-sxtalo;
-		disable-mxtalo;
-	};
-
-	pinctrl {
-		/* Hog CD pins */
-		pinctrl-names = "default";
-		pinctrl-0 = <&cd_default_mode>;
-
-		mmcsd-cd {
-			cd_default_mode: cd_default {
-				cd_default_cfg1 {
-					/* CD input GPIO */
-					ste,pins = "GPIO111_H21";
-					ste,input = <0>;
-				};
-				cd_default_cfg2 {
-					/* CD GPIO biasing */
-					ste,pins = "GPIO112_J21";
-					ste,output = <0>;
-				};
-			};
-		};
-		user-led {
-			user_led_default_mode: user_led_default {
-				user_led_default_cfg {
-					ste,pins = "GPIO2_C5";
-					ste,output = <1>;
-				};
-			};
-		};
-		user-button {
-			user_button_default_mode: user_button_default {
-				user_button_default_cfg {
-					ste,pins = "GPIO3_A4";
-					ste,input = <0>;
-				};
-			};
-		};
-	};
-
-	/* Custom board node with GPIO pins to active etc */
-	usb-s8815 {
-		/* This will bias the MMC/SD card detect line */
-		mmcsd-gpio {
-			gpios = <&gpio3 16 0x1>;
-		};
-	};
-
-	/* The user LED on the board is set up to be used for heartbeat */
-	leds {
-		compatible = "gpio-leds";
-		user-led {
-			label = "user_led";
-			gpios = <&gpio0 2 0x1>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-			pinctrl-names = "default";
-			pinctrl-0 = <&user_led_default_mode>;
-		};
-	};
-
-	/* User key mapped in as "escape" */
-	gpio-keys {
-		compatible = "gpio-keys";
-		user-button {
-			label = "user_button";
-			gpios = <&gpio0 3 0x1>;
-			linux,code = <1>; /* KEY_ESC */
-			gpio-key,wakeup;
-			pinctrl-names = "default";
-			pinctrl-0 = <&user_button_default_mode>;
-		};
-	};
-};
diff --git a/src/arm/ste-nomadik-stn8815.dtsi b/src/arm/ste-nomadik-stn8815.dtsi
deleted file mode 100644
index dbcf521b017f..000000000000
--- a/src/arm/ste-nomadik-stn8815.dtsi
+++ /dev/null
@@ -1,853 +0,0 @@
-/*
- * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		reg = <0x00000000 0x04000000>,
-		    <0x08000000 0x04000000>;
-	};
-
-	L2: l2-cache {
-		compatible = "arm,l210-cache";
-		reg = <0x10210000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <30>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	mtu0: mtu@101e2000 {
-		/* Nomadik system timer */
-		compatible = "st,nomadik-mtu";
-		reg = <0x101e2000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <4>;
-		clocks = <&timclk>, <&pclk>;
-		clock-names = "timclk", "apb_pclk";
-	};
-
-	mtu1: mtu@101e3000 {
-		/* Secondary timer */
-		reg = <0x101e3000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <5>;
-		clocks = <&timclk>, <&pclk>;
-		clock-names = "timclk", "apb_pclk";
-	};
-
-	gpio0: gpio@101e4000 {
-		compatible = "st,nomadik-gpio";
-		reg =  <0x101e4000 0x80>;
-		interrupt-parent = <&vica>;
-		interrupts = <6>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-bank = <0>;
-		clocks = <&pclk>;
-	};
-
-	gpio1: gpio@101e5000 {
-		compatible = "st,nomadik-gpio";
-		reg =  <0x101e5000 0x80>;
-		interrupt-parent = <&vica>;
-		interrupts = <7>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-bank = <1>;
-		clocks = <&pclk>;
-	};
-
-	gpio2: gpio@101e6000 {
-		compatible = "st,nomadik-gpio";
-		reg =  <0x101e6000 0x80>;
-		interrupt-parent = <&vica>;
-		interrupts = <8>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-bank = <2>;
-		clocks = <&pclk>;
-	};
-
-	gpio3: gpio@101e7000 {
-		compatible = "st,nomadik-gpio";
-		reg =  <0x101e7000 0x80>;
-		interrupt-parent = <&vica>;
-		interrupts = <9>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-bank = <3>;
-		clocks = <&pclk>;
-	};
-
-	pinctrl {
-		compatible = "stericsson,stn8815-pinctrl";
-		/* Pin configurations */
-		uart0 {
-			uart0_default_mux: uart0_mux {
-				u0_default_mux {
-					ste,function = "u0";
-					ste,pins = "u0_a_1";
-				};
-			};
-		};
-		uart1 {
-			uart1_default_mux: uart1_mux {
-				u1_default_mux {
-					ste,function = "u1";
-					ste,pins = "u1_a_1";
-				};
-			};
-		};
-		mmcsd {
-			mmcsd_default_mux: mmcsd_mux {
-				mmcsd_default_mux {
-					ste,function = "mmcsd";
-					ste,pins = "mmcsd_a_1";
-				};
-			};
-			mmcsd_default_mode: mmcsd_default {
-				mmcsd_default_cfg1 {
-					/* MCCLK */
-					ste,pins = "GPIO8_B10";
-					ste,output = <0>;
-				};
-				mmcsd_default_cfg2 {
-					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */
-					ste,pins = "GPIO10_C11", "GPIO15_A12",
-					"GPIO16_C13";
-					ste,output = <1>;
-				};
-				mmcsd_default_cfg3 {
-					/* MCCMD, MCDAT3-0, MCMSFBCLK */
-					ste,pins = "GPIO9_A10", "GPIO11_B11",
-					"GPIO12_A11", "GPIO13_C12",
-					"GPIO14_B12", "GPIO24_C15";
-					ste,input = <1>;
-				};
-			};
-		};
-		i2c0 {
-			i2c0_default_mux: i2c0_mux {
-				i2c0_default_mux {
-					ste,function = "i2c0";
-					ste,pins = "i2c0_a_1";
-				};
-			};
-			i2c0_default_mode: i2c0_default {
-				i2c0_default_cfg {
-					ste,pins = "GPIO62_D3", "GPIO63_D2";
-					ste,input = <0>;
-				};
-			};
-		};
-		i2c1 {
-			i2c1_default_mux: i2c1_mux {
-				i2c1_default_mux {
-					ste,function = "i2c1";
-					ste,pins = "i2c1_a_1";
-				};
-			};
-			i2c1_default_mode: i2c1_default {
-				i2c1_default_cfg {
-					ste,pins = "GPIO53_L4", "GPIO54_L3";
-					ste,input = <0>;
-				};
-			};
-		};
-		i2c2 {
-			i2c2_default_mode: i2c2_default {
-				i2c2_default_cfg {
-					ste,pins = "GPIO73_C21", "GPIO74_C20";
-					ste,input = <0>;
-				};
-			};
-		};
-	};
-
-	src: src@101e0000 {
-		compatible = "stericsson,nomadik-src";
-		reg = <0x101e0000 0x1000>;
-		disable-sxtalo;
-		disable-mxtalo;
-
-		/*
-		 * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
-		 * that is parent of TIMCLK, PLL1 and PLL2
-		 */
-		mxtal: mxtal@19.2M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19200000>;
-		};
-
-		/*
-		 * The 2.4 MHz TIMCLK reference clock is active at
-		 * boot time, this is actually the MXTALCLK @19.2 MHz
-		 * divided by 8. This clock is used by the timers and
-		 * watchdog. See page 105 ff.
-		 */
-		timclk: timclk@2.4M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <8>;
-			clock-mult = <1>;
-			clocks = <&mxtal>;
-		};
-
-		/* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */
-		pll1: pll1@0 {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-pll-clock";
-			pll-id = <1>;
-			clocks = <&mxtal>;
-		};
-
-		/* HCLK divides the PLL1 with 1,2,3 or 4 */
-		hclk: hclk@0 {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-hclk-clock";
-			clocks = <&pll1>;
-		};
-		/* The PCLK domain uses HCLK right off */
-		pclk: pclk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&hclk>;
-		};
-
-		/* PLL2 is usually 864 MHz and divided into a few fixed rates */
-		pll2: pll2@0 {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-pll-clock";
-			pll-id = <2>;
-			clocks = <&mxtal>;
-		};
-		clk216: clk216@216M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&pll2>;
-		};
-		clk108: clk108@108M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&clk216>;
-		};
-		clk72: clk72@72M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			/* The data sheet does not say how this is derived */
-			clock-div = <12>;
-			clock-mult = <1>;
-			clocks = <&pll2>;
-		};
-		clk48: clk48@48M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			/* The data sheet does not say how this is derived */
-			clock-div = <18>;
-			clock-mult = <1>;
-			clocks = <&pll2>;
-		};
-		clk27: clk27@27M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&clk108>;
-		};
-
-		/* This apparently exists as well */
-		ulpiclk: ulpiclk@60M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <60000000>;
-		};
-
-		/*
-		 * IP AMBA bus clocks, driving the bus side of the
-		 * peripheral clocking, clock gates.
-		 */
-
-		hclkdma0: hclkdma0@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <0>;
-			clocks = <&hclk>;
-		};
-		hclksmc: hclksmc@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <1>;
-			clocks = <&hclk>;
-		};
-		hclksdram: hclksdram@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <2>;
-			clocks = <&hclk>;
-		};
-		hclkdma1: hclkdma1@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <3>;
-			clocks = <&hclk>;
-		};
-		hclkclcd: hclkclcd@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <4>;
-			clocks = <&hclk>;
-		};
-		pclkirda: pclkirda@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <5>;
-			clocks = <&pclk>;
-		};
-		pclkssp: pclkssp@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <6>;
-			clocks = <&pclk>;
-		};
-		pclkuart0: pclkuart0@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <7>;
-			clocks = <&pclk>;
-		};
-		pclksdi: pclksdi@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <8>;
-			clocks = <&pclk>;
-		};
-		pclki2c0: pclki2c0@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <9>;
-			clocks = <&pclk>;
-		};
-		pclki2c1: pclki2c1@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <10>;
-			clocks = <&pclk>;
-		};
-		pclkuart1: pclkuart1@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <11>;
-			clocks = <&pclk>;
-		};
-		pclkmsp0: pclkmsp0@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <12>;
-			clocks = <&pclk>;
-		};
-		hclkusb: hclkusb@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <13>;
-			clocks = <&hclk>;
-		};
-		hclkdif: hclkdif@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <14>;
-			clocks = <&hclk>;
-		};
-		hclksaa: hclksaa@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <15>;
-			clocks = <&hclk>;
-		};
-		hclksva: hclksva@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <16>;
-			clocks = <&hclk>;
-		};
-		pclkhsi: pclkhsi@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <17>;
-			clocks = <&pclk>;
-		};
-		pclkxti: pclkxti@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <18>;
-			clocks = <&pclk>;
-		};
-		pclkuart2: pclkuart2@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <19>;
-			clocks = <&pclk>;
-		};
-		pclkmsp1: pclkmsp1@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <20>;
-			clocks = <&pclk>;
-		};
-		pclkmsp2: pclkmsp2@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <21>;
-			clocks = <&pclk>;
-		};
-		pclkowm: pclkowm@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <22>;
-			clocks = <&pclk>;
-		};
-		hclkhpi: hclkhpi@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <23>;
-			clocks = <&hclk>;
-		};
-		pclkske: pclkske@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <24>;
-			clocks = <&pclk>;
-		};
-		pclkhsem: pclkhsem@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <25>;
-			clocks = <&pclk>;
-		};
-		hclk3d: hclk3d@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <26>;
-			clocks = <&hclk>;
-		};
-		hclkhash: hclkhash@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <27>;
-			clocks = <&hclk>;
-		};
-		hclkcryp: hclkcryp@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <28>;
-			clocks = <&hclk>;
-		};
-		pclkmshc: pclkmshc@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <29>;
-			clocks = <&pclk>;
-		};
-		hclkusbm: hclkusbm@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <30>;
-			clocks = <&hclk>;
-		};
-		hclkrng: hclkrng@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <31>;
-			clocks = <&hclk>;
-		};
-
-		/* IP kernel clocks */
-		clcdclk: clcdclk@0 {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <36>;
-			clocks = <&clk72 &clk48>;
-		};
-		irdaclk: irdaclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <37>;
-			clocks = <&clk48>;
-		};
-		sspiclk: sspiclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <38>;
-			clocks = <&clk48>;
-		};
-		uart0clk: uart0clk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <39>;
-			clocks = <&clk48>;
-		};
-		sdiclk: sdiclk@48M {
-			/* Also called MCCLK in some documents */
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <40>;
-			clocks = <&clk48>;
-		};
-		i2c0clk: i2c0clk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <41>;
-			clocks = <&clk48>;
-		};
-		i2c1clk: i2c1clk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <42>;
-			clocks = <&clk48>;
-		};
-		uart1clk: uart1clk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <43>;
-			clocks = <&clk48>;
-		};
-		mspclk0: mspclk0@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <44>;
-			clocks = <&clk48>;
-		};
-		usbclk: usbclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <45>;
-			clocks = <&clk48>; /* 48 MHz not ULPI */
-		};
-		difclk: difclk@72M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <46>;
-			clocks = <&clk72>;
-		};
-		ipi2cclk: ipi2cclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <47>;
-			clocks = <&clk48>; /* Guess */
-		};
-		ipbmcclk: ipbmcclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <48>;
-			clocks = <&clk48>; /* Guess */
-		};
-		hsiclkrx: hsiclkrx@216M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <49>;
-			clocks = <&clk216>;
-		};
-		hsiclktx: hsiclktx@108M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <50>;
-			clocks = <&clk108>;
-		};
-		uart2clk: uart2clk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <51>;
-			clocks = <&clk48>;
-		};
-		mspclk1: mspclk1@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <52>;
-			clocks = <&clk48>;
-		};
-		mspclk2: mspclk2@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <53>;
-			clocks = <&clk48>;
-		};
-		owmclk: owmclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <54>;
-			clocks = <&clk48>; /* Guess */
-		};
-		skeclk: skeclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <56>;
-			clocks = <&clk48>; /* Guess */
-		};
-		x3dclk: x3dclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <58>;
-			clocks = <&clk48>; /* Guess */
-		};
-		pclkmsp3: pclkmsp3@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <59>;
-			clocks = <&pclk>;
-		};
-		mspclk3: mspclk3@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <60>;
-			clocks = <&clk48>;
-		};
-		mshcclk: mshcclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <61>;
-			clocks = <&clk48>; /* Guess */
-		};
-		usbmclk: usbmclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <62>;
-			/* Stated as "48 MHz not ULPI clock" */
-			clocks = <&clk48>;
-		};
-		rngcclk: rngcclk@48M {
-			#clock-cells = <0>;
-			compatible = "st,nomadik-src-clock";
-			clock-id = <63>;
-			clocks = <&clk48>; /* Guess */
-		};
-	};
-
-	/* A NAND flash of 128 MiB */
-	fsmc: flash@40000000 {
-		compatible = "stericsson,fsmc-nand";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x10100000 0x1000>,	/* FSMC Register*/
-			<0x40000000 0x2000>,	/* NAND Base DATA */
-			<0x41000000 0x2000>,	/* NAND Base ADDR */
-			<0x40800000 0x2000>;	/* NAND Base CMD */
-		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-		clocks = <&hclksmc>;
-		status = "okay";
-		timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
-
-		partition@0 {
-		label = "X-Loader(NAND)";
-			reg = <0x0 0x40000>;
-		};
-		partition@40000 {
-			label = "MemInit(NAND)";
-			reg = <0x40000 0x40000>;
-		};
-		partition@80000 {
-			label = "BootLoader(NAND)";
-			reg = <0x80000 0x200000>;
-		};
-		partition@280000 {
-			label = "Kernel zImage(NAND)";
-			reg = <0x280000 0x300000>;
-		};
-		partition@580000 {
-			label = "Root Filesystem(NAND)";
-			reg = <0x580000 0x1600000>;
-		};
-		partition@1b80000 {
-			label = "User Filesystem(NAND)";
-			reg = <0x1b80000 0x6480000>;
-		};
-	};
-
-	external-bus@34000000 {
-		compatible = "simple-bus";
-		reg = <0x34000000 0x1000000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x34000000 0x1000000>;
-		ethernet@300 {
-			compatible = "smsc,lan91c111";
-			reg = <0x300 0x0fd00>;
-		};
-	};
-
-	/* I2C0 connected to the STw4811 power management chip */
-	i2c0 {
-		compatible = "st,nomadik-i2c", "arm,primecell";
-		reg = <0x101f8000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <20>;
-		clock-frequency = <100000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&i2c0clk>, <&pclki2c0>;
-		clock-names = "mclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
-
-		stw4811@2d {
-			compatible = "st,stw4811";
-			reg = <0x2d>;
-			vmmc_regulator: vmmc {
-				compatible = "st,stw481x-vmmc";
-				regulator-name = "VMMC";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-		};
-	};
-
-	/* I2C1 connected to various sensors */
-	i2c1 {
-		compatible = "st,nomadik-i2c", "arm,primecell";
-		reg = <0x101f7000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <21>;
-		clock-frequency = <100000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&i2c1clk>, <&pclki2c1>;
-		clock-names = "mclk", "apb_pclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
-
-		camera@2d {
-			   compatible = "st,camera";
-			   reg = <0x10>;
-		};
-		stw5095@1a {
-			   compatible = "st,stw5095";
-			   reg = <0x1a>;
-		};
-		lis3lv02dl@1d {
-			   compatible = "st,lis3lv02dl";
-			   reg = <0x1d>;
-		};
-	};
-
-	/* I2C2 connected to the USB portions of the STw4811 only */
-	i2c2 {
-		compatible = "i2c-gpio";
-		gpios = <&gpio2 10 0>, /* sda */
-			<&gpio2 9 0>; /* scl */
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_default_mode>;
-
-		stw4811@2d {
-			   compatible = "st,stw4811-usb";
-			   reg = <0x2d>;
-		};
-	};
-
-	amba {
-		compatible = "arm,amba-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vica: intc@10140000 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x10140000 0x20>;
-		};
-
-		vicb: intc@10140020 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x10140020 0x20>;
-		};
-
-		uart0: uart@101fd000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101fd000 0x1000>;
-			interrupt-parent = <&vica>;
-			interrupts = <12>;
-			clocks = <&uart0clk>, <&pclkuart0>;
-			clock-names = "uartclk", "apb_pclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_default_mux>;
-		};
-
-		uart1: uart@101fb000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101fb000 0x1000>;
-			interrupt-parent = <&vica>;
-			interrupts = <17>;
-			clocks = <&uart1clk>, <&pclkuart1>;
-			clock-names = "uartclk", "apb_pclk";
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_default_mux>;
-		};
-
-		uart2: uart@101f2000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f2000 0x1000>;
-			interrupt-parent = <&vica>;
-			interrupts = <28>;
-			clocks = <&uart2clk>, <&pclkuart2>;
-			clock-names = "uartclk", "apb_pclk";
-			status = "disabled";
-		};
-
-		rng: rng@101b0000 {
-			compatible = "arm,primecell";
-			reg = <0x101b0000 0x1000>;
-			clocks = <&rngcclk>, <&hclkrng>;
-			clock-names = "rng", "apb_pclk";
-		};
-
-		rtc: rtc@101e8000 {
-			compatible = "arm,pl031", "arm,primecell";
-			reg = <0x101e8000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-			interrupt-parent = <&vica>;
-			interrupts = <10>;
-		};
-
-		mmcsd: sdi@101f6000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0x101f6000 0x1000>;
-			clocks = <&sdiclk>, <&pclksdi>;
-			clock-names = "mclk", "apb_pclk";
-			interrupt-parent = <&vica>;
-			interrupts = <22>;
-			max-frequency = <48000000>;
-			bus-width = <4>;
-			cap-mmc-highspeed;
-			cap-sd-highspeed;
-			cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
-			vmmc-supply = <&vmmc_regulator>;
-		};
-	};
-};
diff --git a/src/arm/ste-snowball.dts b/src/arm/ste-snowball.dts
deleted file mode 100644
index 4a2000c620ad..000000000000
--- a/src/arm/ste-snowball.dts
+++ /dev/null
@@ -1,526 +0,0 @@
-/*
- * Copyright 2011 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "ste-dbx5x0.dtsi"
-#include "ste-href-ab8500.dtsi"
-#include "ste-href-family-pinctrl.dtsi"
-
-/ {
-	model = "Calao Systems Snowball platform with device tree";
-	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	en_3v3_reg: en_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "en-3v3-fixed-supply";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
-		gpio = <&ab8500_gpio 25 0x4>;
-		startup-delay-us = <5000>;
-		enable-active-high;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <2>;
-			label = "userpb";
-			gpios = <&gpio1 0 0x4>;
-		};
-		button@2 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <3>;
-			label = "extkb1";
-			gpios = <&gpio4 23 0x4>;
-		};
-		button@3 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <4>;
-			label = "extkb2";
-			gpios = <&gpio4 24 0x4>;
-		};
-		button@4 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <5>;
-			label = "extkb3";
-			gpios = <&gpio5 1 0x4>;
-		};
-		button@5 {
-			debounce_interval = <50>;
-			wakeup = <1>;
-			linux,code = <6>;
-			label = "extkb4";
-			gpios = <&gpio5 2 0x4>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpioled_snowball_mode>;
-		used-led {
-			label = "user_led";
-			gpios = <&gpio4 14 0x4>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		usb_per5@a03e0000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&musb_default_mode>;
-			pinctrl-1 = <&musb_sleep_mode>;
-		};
-
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-		};
-
-		msp0: msp@80123000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp0_default_mode>;
-			status = "okay";
-		};
-
-		msp1: msp@80124000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp1_default_mode>;
-			status = "okay";
-		};
-
-		msp2: msp@80117000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&msp2_default_mode>;
-			status = "okay";
-		};
-
-		msp3: msp@80125000 {
-			status = "okay";
-		};
-
-		external-bus@50000000 {
-			status = "okay";
-
-			ethernet@0 {
-				compatible = "smsc,lan9115";
-				reg = <0 0x10000>;
-				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-				interrupt-parent = <&gpio4>;
-				vdd33a-supply = <&en_3v3_reg>;
-				vddvario-supply = <&db8500_vape_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&eth_snowball_mode>;
-
-				reg-shift = <1>;
-				reg-io-width = <2>;
-				smsc,force-internal-phy;
-				smsc,irq-active-high;
-				smsc,irq-push-pull;
-
-				clocks = <&prcc_pclk 3 0>;
-			};
-		};
-
-		vmmci: regulator-gpio {
-			gpios = <&gpio7 4 0x4>;
-			enable-gpio = <&gpio6 25 0x4>;
-		};
-
-		// External Micro SD slot
-		sdi0_per1@80126000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux3_reg>;
-			vqmmc-supply = <&vmmci>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi0_default_mode>;
-			pinctrl-1 = <&sdi0_sleep_mode>;
-
-			cd-gpios  = <&gpio6 26 0x4>; // 218
-			cd-inverted;
-
-			status = "okay";
-		};
-
-		// WLAN SDIO channel
-		sdi1_per2@80118000 {
-			arm,primecell-periphid = <0x10480180>;
-			max-frequency = <100000000>;
-			bus-width = <4>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi1_default_mode>;
-			pinctrl-1 = <&sdi1_sleep_mode>;
-
-			status = "okay";
-		};
-
-		// Unused PoP eMMC - register and put it to sleep by default */
-		sdi2_per3@80005000 {
-			arm,primecell-periphid = <0x10480180>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdi2_sleep_mode>;
-
-			status = "okay";
-		};
-
-		// On-board eMMC
-		sdi4_per2@80114000 {
-			arm,primecell-periphid = <0x10480180>;
-		        max-frequency = <100000000>;
-			bus-width = <8>;
-			cap-mmc-highspeed;
-			vmmc-supply = <&ab8500_ldo_aux2_reg>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdi4_default_mode>;
-			pinctrl-1 = <&sdi4_sleep_mode>;
-
-			status = "okay";
-		};
-
-		uart@80120000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart0_default_mode>;
-			pinctrl-1 = <&uart0_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80121000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart1_default_mode>;
-			pinctrl-1 = <&uart1_sleep_mode>;
-			status = "okay";
-		};
-
-		uart@80007000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&uart2_default_mode>;
-			pinctrl-1 = <&uart2_sleep_mode>;
-			status = "okay";
-		};
-
-		i2c@80004000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c0_default_mode>;
-			pinctrl-1 = <&i2c0_sleep_mode>;
-		};
-
-		i2c@80122000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c1_default_mode>;
-			pinctrl-1 = <&i2c1_sleep_mode>;
-		};
-
-		i2c@80128000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c2_default_mode>;
-			pinctrl-1 = <&i2c2_sleep_mode>;
-			lsm303dlh@18 {
-				/* Accelerometer */
-				compatible = "st,lsm303dlh-accel";
-				st,drdy-int-pin = <1>;
-				reg = <0x18>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&accel_snowball_mode>;
-			};
-			lsm303dlm@1e {
-				/* Magnetometer */
-				compatible = "st,lsm303dlm-magn";
-				reg = <0x1e>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&magneto_snowball_mode>;
-			};
-			l3g4200d@68 {
-				/* Gyroscope */
-				compatible = "st,l3g4200d-gyro";
-				st,drdy-int-pin = <2>;
-				reg = <0x68>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-			};
-			lsp001wm@5c {
-				/* Barometer/pressure sensor */
-				compatible = "st,lps001wp-press";
-				reg = <0x5c>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-			};
-		};
-
-		i2c@80110000 {
-			pinctrl-names = "default","sleep";
-			pinctrl-0 = <&i2c3_default_mode>;
-			pinctrl-1 = <&i2c3_sleep_mode>;
-		};
-
-		ssp@80002000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ssp0_snowball_mode>;
-		};
-
-		cpufreq-cooling {
-			status = "okay";
-		};
-
-		prcmu@80157000 {
-			cpufreq {
-				status = "okay";
-			};
-
-			thermal@801573c0 {
-				num-trips = <4>;
-
-				trip0-temp = <70000>;
-				trip0-type = "active";
-				trip0-cdev-num = <1>;
-				trip0-cdev-name0 = "thermal-cpufreq-0";
-
-				trip1-temp = <75000>;
-				trip1-type = "active";
-				trip1-cdev-num = <1>;
-				trip1-cdev-name0 = "thermal-cpufreq-0";
-
-				trip2-temp = <80000>;
-				trip2-type = "active";
-				trip2-cdev-num = <1>;
-				trip2-cdev-name0 = "thermal-cpufreq-0";
-
-				trip3-temp = <85000>;
-				trip3-type = "critical";
-				trip3-cdev-num = <0>;
-
-				status = "okay";
-			};
-
-			ab8500 {
-				ab8500-gpio {
-					compatible = "stericsson,ab8500-gpio";
-				};
-
-				ext_regulators: ab8500-ext-regulators {
-					ab8500_ext1_reg: ab8500_ext1 {
-						regulator-name = "ab8500-ext-supply1";
-					};
-
-					ab8500_ext2_reg_reg: ab8500_ext2 {
-						regulator-name = "ab8500-ext-supply2";
-					};
-
-					ab8500_ext3_reg_reg: ab8500_ext3 {
-						regulator-name = "ab8500-ext-supply3";
-					};
-				};
-
-				ab8500-regulators {
-					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-name = "V-DISPLAY";
-					};
-
-					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-name = "V-eMMC1";
-					};
-
-					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-name = "V-MMC-SD";
-					};
-
-					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-name = "V-INTCORE";
-					};
-
-					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-name = "V-TVOUT";
-					};
-
-					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-name = "dummy";
-					};
-
-					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-name = "V-AUD";
-					};
-
-					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-name = "V-AMIC1";
-					};
-
-					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-name = "V-AMIC2";
-					};
-
-					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-name = "V-DMIC";
-					};
-
-					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-name = "V-CSI/DSI";
-					};
-				};
-			};
-		};
-
-		pinctrl {
-			/*
-			 * Set this up using hogs, as time goes by and as seems fit, these
-			 * can be moved over to being controlled by respective device.
-			 */
-			pinctrl-names = "default";
-			pinctrl-0 = <&gbf_snowball_mode>,
-				  <&wlan_snowball_mode>;
-
-			ethernet {
-				/*
-				 * Mux in "SM" which is used for the
-				 * SMSC911x Ethernet adapter
-				 */
-				eth_snowball_mode: eth_snowball {
-					snowball_mux {
-						ste,function = "sm";
-						ste,pins = "sm_b_1";
-					};
-					/* LAN IRQ pin */
-					snowball_cfg1 {
-						ste,pins = "GPIO140_B11";
-						ste,config = <&in_nopull>;
-					};
-					/* LAN reset pin */
-					snowball_cfg2 {
-						ste,pins = "GPIO141_C12";
-						ste,config = <&gpio_out_hi>;
-					};
-
-				};
-			};
-			sdi0 {
-				sdi0_default_mode: sdi0_default {
-					snowball_mux {
-						ste,function = "mc0";
-						ste,pins = "mc0dat31dir_a_1";
-					};
-					snowball_cfg1 {
-						ste,pins = "GPIO21_AB3"; /* DAT31DIR */
-						ste,config = <&out_hi>;
-					};
-
-				};
-			};
-			ssp0 {
-				ssp0_snowball_mode: ssp0_snowball_default {
-					snowball_mux {
-						ste,function = "ssp0";
-						ste,pins = "ssp0_a_1";
-					};
-					snowball_cfg1 {
-						ste,pins = "GPIO144_B13"; /* FRM */
-						ste,config = <&gpio_out_hi>;
-					};
-					snowball_cfg2 {
-						ste,pins = "GPIO145_C13"; /* RXD */
-						ste,config = <&in_pd>;
-					};
-					snowball_cfg3 {
-						ste,pins =
-						"GPIO146_D13", /* TXD */
-						"GPIO143_D12"; /* CLK */
-						ste,config = <&out_lo>;
-					};
-
-				};
-			};
-			gpio_led {
-				gpioled_snowball_mode: gpioled_default {
-					snowball_cfg1 {
-						ste,pins = "GPIO142_C11";
-						ste,config = <&gpio_out_hi>;
-					};
-
-				};
-			};
-			accelerometer {
-				accel_snowball_mode: accel_snowball {
-					/* Accelerometer lines */
-					snowball_cfg1 {
-						ste,pins =
-						"GPIO163_C20", /* ACCEL_IRQ1 */
-						"GPIO164_B21"; /* ACCEL_IRQ2 */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			magnetometer {
-				magneto_snowball_mode: magneto_snowball {
-					snowball_cfg1 {
-						ste,pins = "GPIO165_C21"; /* MAG_DRDY */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			gbf {
-				gbf_snowball_mode: gbf_snowball {
-					/*
-					 * GBF (GPS, Bluetooth, FM-radio) interface,
-					 * pull low to reset state
-					 */
-					snowball_cfg1 {
-						ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */
-						ste,config = <&gpio_out_lo>;
-					};
-				 };
-			};
-			wlan {
-				wlan_snowball_mode: wlan_snowball {
-					/*
-					 * Activate this mode with the WLAN chip.
-					 * These are plain GPIO pins used by WLAN
-					 */
-					snowball_cfg1 {
-						ste,pins =
-						"GPIO161_D21", /* WLAN_PMU_EN */
-						"GPIO215_AH13"; /* WLAN_ENA */
-						ste,config = <&gpio_out_lo>;
-					};
-					snowball_cfg2 {
-						ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-		};
-
-		mcde@a0350000 {
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&lcd_default_mode>;
-			pinctrl-1 = <&lcd_sleep_mode>;
-		};
-	};
-};
diff --git a/src/arm/ste-u300.dts b/src/arm/ste-u300.dts
deleted file mode 100644
index 82a661677e97..000000000000
--- a/src/arm/ste-u300.dts
+++ /dev/null
@@ -1,473 +0,0 @@
-/*
- * Device Tree for the ST-Ericsson U300 Machine and SoC
- */
-
-/dts-v1/;
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "ST-Ericsson U300";
-	compatible = "stericsson,u300";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen {
-		bootargs = "root=/dev/ram0 console=ttyAMA0,115200n8 earlyprintk";
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-        };
-
-	memory {
-		reg = <0x48000000 0x03c00000>;
-	};
-
-	s365 {
-		compatible = "stericsson,s365";
-		vana15-supply = <&ab3100_ldo_d_reg>;
-		syscon = <&syscon>;
-	};
-
-	syscon: syscon@c0011000 {
-		compatible = "stericsson,u300-syscon", "syscon";
-		reg = <0xc0011000 0x1000>;
-		clk32: app_32_clk@32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-		pll13: pll13@13M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-		/* Slow bridge clocks under PLL13 */
-		slow_clk: slow_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <0>;
-			clocks = <&pll13>;
-		};
-		uart0_clk: uart0_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <1>;
-			clocks = <&slow_clk>;
-		};
-		gpio_clk: gpio_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <4>;
-			clocks = <&slow_clk>;
-		};
-		rtc_clk: rtc_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <6>;
-			clocks = <&slow_clk>;
-		};
-		apptimer_clk: app_tmr_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <7>;
-			clocks = <&slow_clk>;
-		};
-		acc_tmr_clk@13M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <0>; /* Slow */
-			clock-id = <8>;
-			clocks = <&slow_clk>;
-		};
-		pll208: pll208@208M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <208000000>;
-		};
-		app208: app_208_clk@208M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&pll208>;
-		};
-		cpu_clk@208M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <3>;
-			clocks = <&app208>;
-		};
-		app104: app_104_clk@104M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&pll208>;
-		};
-		semi_clk@104M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <9>;
-			clocks = <&app104>;
-		};
-		app52: app_52_clk@52M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&pll208>;
-		};
-		/* AHB subsystem clocks */
-		ahb_clk: ahb_subsys_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <10>;
-			clocks = <&app52>;
-		};
-		intcon_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <12>;
-			clocks = <&ahb_clk>;
-		};
-		emif_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <5>;
-			clocks = <&ahb_clk>;
-		};
-		dmac_clk: dmac_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <4>;
-			clocks = <&app52>;
-		};
-		fsmc_clk: fsmc_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <6>;
-			clocks = <&app52>;
-		};
-		xgam_clk: xgam_clk@52M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <2>; /* Rest */
-			clock-id = <8>;
-			clocks = <&app52>;
-		};
-		app26: app_26_clk@26M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&app52>;
-		};
-		/* Fast bridge  clocks */
-		fast_clk: fast_clk@26M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <1>; /* Fast */
-			clock-id = <0>;
-			clocks = <&app26>;
-		};
-		i2c0_clk: i2c0_clk@26M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <1>; /* Fast */
-			clock-id = <1>;
-			clocks = <&fast_clk>;
-		};
-		i2c1_clk: i2c1_clk@26M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <1>; /* Fast */
-			clock-id = <2>;
-			clocks = <&fast_clk>;
-		};
-		mmc_pclk: mmc_p_clk@26M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <1>; /* Fast */
-			clock-id = <5>;
-			clocks = <&fast_clk>;
-		};
-		mmc_mclk: mmc_mclk {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-mclk";
-			clocks = <&mmc_pclk>;
-		};
-		spi_clk: spi_p_clk@26M {
-			#clock-cells = <0>;
-			compatible = "stericsson,u300-syscon-clk";
-			clock-type = <1>; /* Fast */
-			clock-id = <6>;
-			clocks = <&fast_clk>;
-		};
-	};
-
-	timer: timer@c0014000 {
-		compatible = "stericsson,u300-apptimer";
-		reg = <0xc0014000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <24 25 26 27>;
-		clocks = <&apptimer_clk>;
-	};
-
-	gpio: gpio@c0016000 {
-		compatible = "stericsson,gpio-coh901";
-		reg = <0xc0016000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <0 1 2 18 21 22 23>;
-		clocks = <&gpio_clk>;
-		interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3",
-				"gpio4", "gpio5", "gpio6";
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	pinctrl: pinctrl@c0011000 {
-		compatible = "stericsson,pinctrl-u300";
-		reg = <0xc0011000 0x1000>;
-	};
-
-	watchdog: watchdog@c0012000 {
-		compatible = "stericsson,coh901327";
-		reg = <0xc0012000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <3>;
-		clocks = <&clk32>;
-	};
-
-	rtc: rtc@c0017000 {
-		compatible = "stericsson,coh901331";
-		reg = <0xc0017000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <10>;
-		clocks = <&rtc_clk>;
-	};
-
-	dmac: dma-controller@c00020000 {
-		compatible = "stericsson,coh901318";
-		reg = <0xc0020000 0x1000>;
-		interrupt-parent = <&vica>;
-		interrupts = <2>;
-		#dma-cells = <1>;
-		dma-channels = <40>;
-		clocks = <&dmac_clk>;
-	};
-
-	/* A NAND flash of 128 MiB */
-	fsmc: flash@40000000 {
-		compatible = "stericsson,fsmc-nand";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x9f800000 0x1000>,	/* FSMC Register*/
-			<0x80000000 0x4000>,	/* NAND Base DATA */
-			<0x80020000 0x4000>,	/* NAND Base ADDR */
-			<0x80010000 0x4000>;	/* NAND Base CMD */
-		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
-		nand-skip-bbtscan;
-		clocks = <&fsmc_clk>;
-
-		partition@0 {
-		label = "boot records";
-			reg = <0x0 0x20000>;
-		};
-		partition@20000 {
-			label = "free";
-			reg = <0x20000 0x7e0000>;
-		};
-		partition@800000 {
-			label = "platform";
-			reg = <0x800000 0xf800000>;
-		};
-	};
-
-	i2c0: i2c@c0004000 {
-		compatible = "st,ddci2c";
-		reg = <0xc0004000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <8>;
-		clocks = <&i2c0_clk>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		ab3100: ab3100@48 {
-			compatible = "stericsson,ab3100";
-			reg = <0x48>;
-			interrupt-parent = <&vica>;
-			interrupts = <0>; /* EXT0 IRQ */
-			ab3100-regulators {
-				compatible = "stericsson,ab3100-regulators";
-				ab3100_ldo_a_reg: ab3100_ldo_a {
-					regulator-compatible = "ab3100_ldo_a";
-					startup-delay-us = <200>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-				ab3100_ldo_c_reg: ab3100_ldo_c {
-					regulator-compatible = "ab3100_ldo_c";
-					startup-delay-us = <200>;
-				};
-				ab3100_ldo_d_reg: ab3100_ldo_d {
-					regulator-compatible = "ab3100_ldo_d";
-					startup-delay-us = <200>;
-				};
-				ab3100_ldo_e_reg: ab3100_ldo_e {
-					regulator-compatible = "ab3100_ldo_e";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					startup-delay-us = <200>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-				ab3100_ldo_f_reg: ab3100_ldo_f {
-					regulator-compatible = "ab3100_ldo_f";
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					startup-delay-us = <600>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-				ab3100_ldo_g_reg: ab3100_ldo_g {
-					regulator-compatible = "ab3100_ldo_g";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <2850000>;
-					startup-delay-us = <400>;
-				};
-				ab3100_ldo_h_reg: ab3100_ldo_h {
-					regulator-compatible = "ab3100_ldo_h";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <2750000>;
-					startup-delay-us = <200>;
-				};
-				ab3100_ldo_k_reg: ab3100_ldo_k {
-					regulator-compatible = "ab3100_ldo_k";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2750000>;
-					startup-delay-us = <200>;
-				};
-				ab3100_ext_reg: ab3100_ext {
-					regulator-compatible = "ab3100_ext";
-				};
-				ab3100_buck_reg: ab3100_buck {
-					regulator-compatible = "ab3100_buck";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1800000>;
-					startup-delay-us = <1000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	i2c1: i2c@c0005000 {
-		compatible = "st,ddci2c";
-		reg = <0xc0005000 0x1000>;
-		interrupt-parent = <&vicb>;
-		interrupts = <9>;
-		clocks = <&i2c1_clk>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		fwcam0: fwcam@10 {
-			reg = <0x10>;
-		};
-		fwcam1: fwcam@5d {
-			reg = <0x5d>;
-		};
-	};
-
-	amba {
-		compatible = "arm,amba-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vica: interrupt-controller@a0001000 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xa0001000 0x20>;
-		};
-
-		vicb: interrupt-controller@a0002000 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xa0002000 0x20>;
-		};
-
-		uart0: serial@c0013000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xc0013000 0x1000>;
-			interrupt-parent = <&vica>;
-			interrupts = <22>;
-			clocks = <&uart0_clk>, <&uart0_clk>;
-			clock-names = "apb_pclk", "uart0_clk";
-			dmas = <&dmac 17 &dmac 18>;
-			dma-names = "tx", "rx";
-		};
-
-		uart1: serial@c0007000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0xc0007000 0x1000>;
-			interrupt-parent = <&vicb>;
-			interrupts = <20>;
-			dmas = <&dmac 38 &dmac 39>;
-			dma-names = "tx", "rx";
-		};
-
-		mmcsd: mmcsd@c0001000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			reg = <0xc0001000 0x1000>;
-			interrupt-parent = <&vicb>;
-			interrupts = <6 7>;
-			clocks = <&mmc_pclk>, <&mmc_mclk>;
-			clock-names = "apb_pclk", "mclk";
-			max-frequency = <24000000>;
-			bus-width = <4>; // SD-card slot
-			cap-mmc-highspeed;
-			cap-sd-highspeed;
-			cd-gpios = <&gpio 12 0x4>;
-			cd-inverted;
-			vmmc-supply = <&ab3100_ldo_g_reg>;
-			dmas = <&dmac 14>;
-			dma-names = "rx";
-		};
-
-		spi: ssp@c0006000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0xc0006000 0x1000>;
-			interrupt-parent = <&vica>;
-			interrupts = <23>;
-			clocks = <&spi_clk>, <&spi_clk>;
-			clock-names = "SSPCLK", "apb_pclk";
-			dmas = <&dmac 27 &dmac 28>;
-			dma-names = "tx", "rx";
-			num-cs = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			spi-dummy@1 {
-				compatible = "arm,pl022-dummy";
-				reg = <1>;
-				spi-max-frequency = <20000000>;
-			};
-		};
-	};
-};
diff --git a/src/arm/stih407-b2120.dts b/src/arm/stih407-b2120.dts
deleted file mode 100644
index fe69f92e5f82..000000000000
--- a/src/arm/stih407-b2120.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih407.dtsi"
-/ {
-	model = "STiH407 B2120";
-	compatible = "st,stih407-b2120", "st,stih407";
-
-	chosen {
-		bootargs = "console=ttyAS0,115200";
-		linux,stdout-path = &sbc_serial0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		ttyAS0 = &sbc_serial0;
-	};
-
-	soc {
-		sbc_serial0: serial@9530000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			red {
-				#gpio-cells = <2>;
-				label = "Front Panel LED";
-				gpios = <&pio4 1 0>;
-				linux,default-trigger = "heartbeat";
-			};
-			green {
-				#gpio-cells = <2>;
-				gpios = <&pio1 3 0>;
-				default-state = "off";
-			};
-		};
-
-		i2c@9842000 {
-			status = "okay";
-		};
-
-		i2c@9843000 {
-			status = "okay";
-		};
-
-		i2c@9844000 {
-			status = "okay";
-		};
-
-		i2c@9845000 {
-			status = "okay";
-		};
-
-		i2c@9540000 {
-			status = "okay";
-		};
-
-		/* SSC11 to HDMI */
-		i2c@9541000 {
-			status = "okay";
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-	};
-};
diff --git a/src/arm/stih407-clock.dtsi b/src/arm/stih407-clock.dtsi
deleted file mode 100644
index 800f46f009f3..000000000000
--- a/src/arm/stih407-clock.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics R&D Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/ {
-	clocks {
-		/*
-		 * Fixed 30MHz oscillator inputs to SoC
-		 */
-		clk_sysin: clk-sysin {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <30000000>;
-		};
-
-		/*
-		 * ARM Peripheral clock for timers
-		 */
-		arm_periph_clk: arm-periph-clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <600000000>;
-		};
-
-		/*
-		 * Bootloader initialized system infrastructure clock for
-		 * serial devices.
-		 */
-		clk_ext2f_a9: clockgen-c0@13 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <200000000>;
-			clock-output-names = "clk-s-icn-reg-0";
-		};
-	};
-};
diff --git a/src/arm/stih407-pinctrl.dtsi b/src/arm/stih407-pinctrl.dtsi
deleted file mode 100644
index 402844cb3152..000000000000
--- a/src/arm/stih407-pinctrl.dtsi
+++ /dev/null
@@ -1,615 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "st-pincfg.h"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-
-	aliases {
-		/* 0-5: PIO_SBC */
-		gpio0 = &pio0;
-		gpio1 = &pio1;
-		gpio2 = &pio2;
-		gpio3 = &pio3;
-		gpio4 = &pio4;
-		gpio5 = &pio5;
-		/* 10-19: PIO_FRONT0 */
-		gpio6 = &pio10;
-		gpio7 = &pio11;
-		gpio8 = &pio12;
-		gpio9 = &pio13;
-		gpio10 = &pio14;
-		gpio11 = &pio15;
-		gpio12 = &pio16;
-		gpio13 = &pio17;
-		gpio14 = &pio18;
-		gpio15 = &pio19;
-		/* 20: PIO_FRONT1 */
-		gpio16 = &pio20;
-		/* 30-35: PIO_REAR */
-		gpio17 = &pio30;
-		gpio18 = &pio31;
-		gpio19 = &pio32;
-		gpio20 = &pio33;
-		gpio21 = &pio34;
-		gpio22 = &pio35;
-		/* 40-42: PIO_FLASH */
-		gpio23 = &pio40;
-		gpio24 = &pio41;
-		gpio25 = &pio42;
-	};
-
-	soc {
-		pin-controller-sbc {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stih407-sbc-pinctrl";
-			st,syscfg = <&syscfg_sbc>;
-			reg = <0x0961f080 0x4>;
-			reg-names = "irqmux";
-			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
-			ranges = <0 0x09610000 0x6000>;
-
-			pio0: gpio@09610000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO0";
-			};
-			pio1: gpio@09611000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x100>;
-				st,bank-name = "PIO1";
-			};
-			pio2: gpio@09612000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x100>;
-				st,bank-name = "PIO2";
-			};
-			pio3: gpio@09613000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x100>;
-				st,bank-name = "PIO3";
-			};
-			pio4: gpio@09614000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x100>;
-				st,bank-name = "PIO4";
-			};
-
-			pio5: gpio@09615000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x100>;
-				st,bank-name = "PIO5";
-			};
-
-			rc {
-				pinctrl_ir: ir0 {
-					st,pins {
-						ir = <&pio4 0 ALT2 IN>;
-					};
-				};
-			};
-
-			/* SBC_ASC0 - UART10 */
-			sbc_serial0 {
-				pinctrl_sbc_serial0: sbc_serial0-0 {
-					st,pins {
-						tx = <&pio3 4 ALT1 OUT>;
-						rx = <&pio3 5 ALT1 IN>;
-					};
-				};
-			};
-			/* SBC_ASC1 - UART11 */
-			sbc_serial1 {
-				pinctrl_sbc_serial1: sbc_serial1-0 {
-					st,pins {
-						tx = <&pio2 6 ALT3 OUT>;
-						rx = <&pio2 7 ALT3 IN>;
-					};
-				};
-			};
-
-			i2c10 {
-				pinctrl_i2c10_default: i2c10-default {
-					st,pins {
-						sda = <&pio4 6 ALT1 BIDIR>;
-						scl = <&pio4 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			i2c11 {
-				pinctrl_i2c11_default: i2c11-default {
-					st,pins {
-						sda = <&pio5 1 ALT1 BIDIR>;
-						scl = <&pio5 0 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			keyscan {
-				pinctrl_keyscan: keyscan {
-					st,pins {
-						keyin0 = <&pio4 0 ALT6 IN>;
-						keyin1 = <&pio4 5 ALT4 IN>;
-						keyin2 = <&pio0 4 ALT2 IN>;
-						keyin3 = <&pio2 6 ALT2 IN>;
-
-						keyout0 = <&pio4 6 ALT4 OUT>;
-						keyout1 = <&pio1 7 ALT2 OUT>;
-						keyout2 = <&pio0 6 ALT2 OUT>;
-						keyout3 = <&pio2 7 ALT2 OUT>;
-					};
-				};
-			};
-
-			gmac1 {
-				/*
-				 * Almost all the boards based on STiH407 SoC have an embedded
-				 * switch where the mdio/mdc have been used for managing the SMI
-				 * iface via I2C. For this reason these lines can be allocated
-				 * by using dedicated configuration (in case of there will be a
-				 * standard PHY transceiver on-board).
-				 */
-				pinctrl_rgmii1: rgmii1-0 {
-					st,pins {
-
-						txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
-						txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
-						txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
-						txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
-						txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
-						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
-						rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
-						rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
-						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
-						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
-						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
-						rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
-						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
-						phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
-					};
-				};
-
-				pinctrl_rgmii1_mdio: rgmii1-mdio {
-					st,pins {
-						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
-						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
-						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
-					};
-				};
-
-				pinctrl_mii1: mii1 {
-					st,pins {
-						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
-						col = <&pio0 7 ALT1 IN BYPASS 1000>;
-
-						mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
-						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
-						crs = <&pio1 2 ALT1 IN BYPASS 1000>;
-						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
-						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
-						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
-						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
-					};
-				};
-			};
-
-			pwm1 {
-				pinctrl_pwm1_chan0_default: pwm1-0-default {
-					st,pins {
-						pwm-out = <&pio3 0 ALT1 OUT>;
-					};
-				};
-				pinctrl_pwm1_chan1_default: pwm1-1-default {
-					st,pins {
-						pwm-out = <&pio4 4 ALT1 OUT>;
-					};
-				};
-				pinctrl_pwm1_chan2_default: pwm1-2-default {
-					st,pins {
-						pwm-out = <&pio4 6 ALT3 OUT>;
-					};
-				};
-				pinctrl_pwm1_chan3_default: pwm1-3-default {
-					st,pins {
-						pwm-out = <&pio4 7 ALT3 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stih407-front-pinctrl";
-			st,syscfg = <&syscfg_front>;
-			reg = <0x0920f080 0x4>;
-			reg-names = "irqmux";
-			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
-			ranges = <0 0x09200000 0x10000>;
-
-			pio10: pio@09200000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO10";
-			};
-			pio11: pio@09201000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x100>;
-				st,bank-name = "PIO11";
-			};
-			pio12: pio@09202000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x100>;
-				st,bank-name = "PIO12";
-			};
-			pio13: pio@09203000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x100>;
-				st,bank-name = "PIO13";
-			};
-			pio14: pio@09204000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x100>;
-				st,bank-name = "PIO14";
-			};
-			pio15: pio@09205000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x100>;
-				st,bank-name = "PIO15";
-			};
-			pio16: pio@09206000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x6000 0x100>;
-				st,bank-name = "PIO16";
-			};
-			pio17: pio@09207000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x7000 0x100>;
-				st,bank-name = "PIO17";
-			};
-			pio18: pio@09208000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x8000 0x100>;
-				st,bank-name = "PIO18";
-			};
-			pio19: pio@09209000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x9000 0x100>;
-				st,bank-name = "PIO19";
-			};
-
-			/* Comms */
-			serial0 {
-				pinctrl_serial0: serial0-0 {
-					st,pins {
-						tx = <&pio17 0 ALT1 OUT>;
-						rx = <&pio17 1 ALT1 IN>;
-					};
-				};
-			};
-
-			serial1 {
-				pinctrl_serial1: serial1-0 {
-					st,pins {
-						tx = <&pio16 0 ALT1 OUT>;
-						rx = <&pio16 1 ALT1 IN>;
-					};
-				};
-			};
-
-			serial2 {
-				pinctrl_serial2: serial2-0 {
-					st,pins {
-						tx = <&pio15 0 ALT1 OUT>;
-						rx = <&pio15 1 ALT1 IN>;
-					};
-				};
-			};
-
-			mmc1 {
-				pinctrl_sd1: sd1-0 {
-					st,pins {
-						sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
-						sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
-						sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
-						sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
-						sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
-						sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
-						sd_led = <&pio16 6 ALT6 OUT>;
-						sd_pwren = <&pio16 7 ALT6 OUT>;
-						sd_cd = <&pio19 0 ALT6 IN>;
-						sd_wp = <&pio19 1 ALT6 IN>;
-					};
-				};
-			};
-
-
-			i2c0 {
-				pinctrl_i2c0_default: i2c0-default {
-					st,pins {
-						sda = <&pio10 6 ALT2 BIDIR>;
-						scl = <&pio10 5 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			i2c1 {
-				pinctrl_i2c1_default: i2c1-default {
-					st,pins {
-						sda = <&pio11 1 ALT2 BIDIR>;
-						scl = <&pio11 0 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			i2c2 {
-				pinctrl_i2c2_default: i2c2-default {
-					st,pins {
-						sda = <&pio15 6 ALT2 BIDIR>;
-						scl = <&pio15 5 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			i2c3 {
-				pinctrl_i2c3_default: i2c3-default {
-					st,pins {
-						sda = <&pio18 6 ALT1 BIDIR>;
-						scl = <&pio18 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			spi0 {
-				pinctrl_spi0_default: spi0-default {
-					st,pins {
-						mtsr = <&pio12 6 ALT2 BIDIR>;
-						mrst = <&pio12 7 ALT2 BIDIR>;
-						scl = <&pio12 5 ALT2 BIDIR>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front1 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stih407-front-pinctrl";
-			st,syscfg = <&syscfg_front>;
-			reg = <0x0921f080 0x4>;
-			reg-names = "irqmux";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
-			ranges = <0 0x09210000 0x10000>;
-
-			pio20: pio@09210000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO20";
-			};
-		};
-
-		pin-controller-rear {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stih407-rear-pinctrl";
-			st,syscfg = <&syscfg_rear>;
-			reg = <0x0922f080 0x4>;
-			reg-names = "irqmux";
-			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
-			ranges = <0 0x09220000 0x6000>;
-
-			pio30: gpio@09220000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO30";
-			};
-			pio31: gpio@09221000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x100>;
-				st,bank-name = "PIO31";
-			};
-			pio32: gpio@09222000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x100>;
-				st,bank-name = "PIO32";
-			};
-			pio33: gpio@09223000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x3000 0x100>;
-				st,bank-name = "PIO33";
-			};
-			pio34: gpio@09224000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x4000 0x100>;
-				st,bank-name = "PIO34";
-			};
-			pio35: gpio@09225000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x5000 0x100>;
-				st,bank-name = "PIO35";
-			};
-
-			i2c4 {
-				pinctrl_i2c4_default: i2c4-default {
-					st,pins {
-						sda = <&pio30 1 ALT1 BIDIR>;
-						scl = <&pio30 0 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			i2c5 {
-				pinctrl_i2c5_default: i2c5-default {
-					st,pins {
-						sda = <&pio34 4 ALT1 BIDIR>;
-						scl = <&pio34 3 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			usb3 {
-				pinctrl_usb3: usb3-2 {
-					st,pins {
-						usb-oc-detect = <&pio35 4 ALT1 IN>;
-						usb-pwr-enable = <&pio35 5 ALT1 OUT>;
-						usb-vbus-valid = <&pio35 6 ALT1 IN>;
-					};
-				};
-			};
-
-			pwm0 {
-				pinctrl_pwm0_chan0_default: pwm0-0-default {
-					st,pins {
-						pwm-out = <&pio31 1 ALT1 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-flash {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stih407-flash-pinctrl";
-			st,syscfg = <&syscfg_flash>;
-			reg = <0x0923f080 0x4>;
-			reg-names = "irqmux";
-			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
-			ranges = <0 0x09230000 0x3000>;
-
-			pio40: gpio@09230000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0 0x100>;
-				st,bank-name = "PIO40";
-			};
-			pio41: gpio@09231000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x1000 0x100>;
-				st,bank-name = "PIO41";
-			};
-			pio42: gpio@09232000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x2000 0x100>;
-				st,bank-name = "PIO42";
-			};
-
-			mmc0 {
-				pinctrl_mmc0: mmc0-0 {
-					st,pins {
-						emmc_clk = <&pio40 6 ALT1 BIDIR>;
-						emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
-						emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
-						emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
-						emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
-						emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
-						emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
-						emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
-						emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
-						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/src/arm/stih407.dtsi b/src/arm/stih407.dtsi
deleted file mode 100644
index 4f9024f19866..000000000000
--- a/src/arm/stih407.dtsi
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih407-clock.dtsi"
-#include "stih407-pinctrl.dtsi"
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	intc: interrupt-controller@08761000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
-	};
-
-	scu@08760000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x08760000 0x1000>;
-	};
-
-	timer@08760200 {
-		interrupt-parent = <&intc>;
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x08760200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&arm_periph_clk>;
-	};
-
-	l2: cache-controller {
-		compatible = "arm,pl310-cache";
-		reg = <0x08762000 0x1000>;
-		arm,data-latency = <3 3 3>;
-		arm,tag-latency = <2 2 2>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-		compatible = "simple-bus";
-
-		syscfg_sbc: sbc-syscfg@9620000 {
-			compatible = "st,stih407-sbc-syscfg", "syscon";
-			reg = <0x9620000 0x1000>;
-		};
-
-		syscfg_front: front-syscfg@9280000 {
-			compatible = "st,stih407-front-syscfg", "syscon";
-			reg = <0x9280000 0x1000>;
-		};
-
-		syscfg_rear: rear-syscfg@9290000 {
-			compatible = "st,stih407-rear-syscfg", "syscon";
-			reg = <0x9290000 0x1000>;
-		};
-
-		syscfg_flash: flash-syscfg@92a0000 {
-			compatible = "st,stih407-flash-syscfg", "syscon";
-			reg = <0x92a0000 0x1000>;
-		};
-
-		syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
-			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
-			reg = <0x9600000 0x1000>;
-		};
-
-		syscfg_core: core-syscfg@92b0000 {
-			compatible = "st,stih407-core-syscfg", "syscon";
-			reg = <0x92b0000 0x1000>;
-		};
-
-		syscfg_lpm: lpm-syscfg@94b5100 {
-			compatible = "st,stih407-lpm-syscfg", "syscon";
-			reg = <0x94b5100 0x1000>;
-		};
-
-		serial@9830000 {
-			compatible = "st,asc";
-			reg = <0x9830000 0x2c>;
-			interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_serial0>;
-			clocks = <&clk_ext2f_a9>;
-
-			status = "disabled";
-		};
-
-		serial@9831000 {
-			compatible = "st,asc";
-			reg = <0x9831000 0x2c>;
-			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_serial1>;
-			clocks = <&clk_ext2f_a9>;
-
-			status = "disabled";
-		};
-
-		serial@9832000 {
-			compatible = "st,asc";
-			reg = <0x9832000 0x2c>;
-			interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_serial2>;
-			clocks = <&clk_ext2f_a9>;
-
-			status = "disabled";
-		};
-
-		/* SBC_ASC0 - UART10 */
-		sbc_serial0: serial@9530000 {
-			compatible = "st,asc";
-			reg = <0x9530000 0x2c>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sbc_serial0>;
-			clocks = <&clk_sysin>;
-
-			status = "disabled";
-		};
-
-		serial@9531000 {
-			compatible = "st,asc";
-			reg = <0x9531000 0x2c>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_sbc_serial1>;
-			clocks = <&clk_sysin>;
-
-			status = "disabled";
-		};
-
-		i2c@9840000 {
-			compatible = "st,comms-ssc4-i2c";
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x9840000 0x110>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c0_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9841000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9841000 0x110>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c1_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9842000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9842000 0x110>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c2_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9843000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9843000 0x110>;
-			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c3_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9844000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9844000 0x110>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c4_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9845000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9845000 0x110>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_ext2f_a9>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c5_default>;
-
-			status = "disabled";
-		};
-
-
-		/* SSCs on SBC */
-		i2c@9540000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9540000 0x110>;
-			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_sysin>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c10_default>;
-
-			status = "disabled";
-		};
-
-		i2c@9541000 {
-			compatible = "st,comms-ssc4-i2c";
-			reg = <0x9541000 0x110>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_sysin>;
-			clock-names = "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c11_default>;
-
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/stih415-b2000.dts b/src/arm/stih415-b2000.dts
deleted file mode 100644
index bdfbd3765db2..000000000000
--- a/src/arm/stih415-b2000.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih415.dtsi"
-#include "stih41x-b2000.dtsi"
-/ {
-	model = "STiH415 B2000 Board";
-	compatible = "st,stih415-b2000", "st,stih415";
-};
diff --git a/src/arm/stih415-b2020.dts b/src/arm/stih415-b2020.dts
deleted file mode 100644
index 71903a87bd31..000000000000
--- a/src/arm/stih415-b2020.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih415.dtsi"
-#include "stih41x-b2020.dtsi"
-/ {
-	model = "STiH415 B2020 Board";
-	compatible = "st,stih415-b2020", "st,stih415";
-};
diff --git a/src/arm/stih415-clock.dtsi b/src/arm/stih415-clock.dtsi
deleted file mode 100644
index 3ee34514bc4b..000000000000
--- a/src/arm/stih415-clock.dtsi
+++ /dev/null
@@ -1,533 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/stih415-clks.h>
-
-/ {
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed 30MHz oscillator input to SoC
-		 */
-		clk_sysin: clk-sysin {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <30000000>;
-		};
-
-		/*
-		 * ClockGenAs on SASG1
-		 */
-		clockgen-a@fee62000 {
-			reg = <0xfee62000 0xb48>;
-
-			clk_s_a0_pll: clk-s-a0-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll0-hs",
-						     "clk-s-a0-pll0-ls",
-						     "clk-s-a0-pll1";
-			};
-
-			clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-osc-prediv";
-			};
-
-			clk_s_a0_hs: clk-s-a0-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 0>, /* PLL0 HS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-fdma-0",
-						     "clk-s-fdma-1",
-						     ""; /* clk-s-jit-sense */
-						     /* Fourth output unused */
-			};
-
-			clk_s_a0_ls: clk-s-a0-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 1>, /* PLL0 LS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-reg-0",
-						     "clk-s-icn-if-0",
-						     "clk-s-icn-reg-lp-0",
-						     "clk-s-emiss",
-						     "clk-s-eth1-phy",
-						     "clk-s-mii-ref-out";
-						 /* Remaining outputs unused */
-			};
-		};
-
-		clockgen-a@fee81000 {
-			reg = <0xfee81000 0xb48>;
-
-			clk_s_a1_pll: clk-s-a1-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-pll0-hs",
-						     "clk-s-a1-pll0-ls",
-						     "clk-s-a1-pll1";
-			};
-
-			clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-osc-prediv";
-			};
-
-			clk_s_a1_hs: clk-s-a1-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 0>, /* PLL0 HS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "", /* Reserved */
-						     "", /* Reserved */
-						     "clk-s-stac-phy",
-						     "clk-s-vtac-tx-phy";
-			};
-
-			clk_s_a1_ls: clk-s-a1-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 1>, /* PLL0 LS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-if-2",
-						     "clk-s-card-mmc",
-						     "clk-s-icn-if-1",
-						     "clk-s-gmac0-phy",
-						     "clk-s-nand-ctrl",
-						     "", /* Reserved */
-						     "clk-s-mii0-ref-out",
-						     ""; /* clk-s-stac-sys */
-						 /* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * ClockGenAs on MPE41
-		 */
-		clockgen-a@fde12000 {
-			reg = <0xfde12000 0xb50>;
-
-			clk_m_a0_pll0: clk-m-a0-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll0-phi0",
-						     "clk-m-a0-pll0-phi1",
-						     "clk-m-a0-pll0-phi2",
-						     "clk-m-a0-pll0-phi3";
-			};
-
-			clk_m_a0_pll1: clk-m-a0-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll1-phi0",
-						     "clk-m-a0-pll1-phi1",
-						     "clk-m-a0-pll1-phi2",
-						     "clk-m-a0-pll1-phi3";
-			};
-
-			clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-osc-prediv";
-			};
-
-			clk_m_a0_div0: clk-m-a0-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-apb-pm", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-pp-dmu-0",
-						     "clk-m-pp-dmu-1",
-						     "clk-m-icm-disp",
-						     ""; /* Unused */
-			};
-
-			clk_m_a0_div1: clk-m-a0-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-a9-ext2f",
-						     "clk-m-st40rt",
-						     "clk-m-st231-dmu-0",
-						     "clk-m-st231-dmu-1",
-						     "clk-m-st231-aud",
-						     "clk-m-st231-gp-0";
-			};
-
-			clk_m_a0_div2: clk-m-a0-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-st231-gp-1",
-						     "clk-m-icn-cpu",
-						     "clk-m-icn-stac",
-						     "clk-m-icn-dmu-0",
-						     "clk-m-icn-dmu-1",
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* Unused */
-			};
-
-			clk_m_a0_div3: clk-m-a0-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-icn-eram",
-						     "clk-m-a9-trace";
-			};
-		};
-
-		clockgen-a@fd6db000 {
-			reg = <0xfd6db000 0xb50>;
-
-			clk_m_a1_pll0: clk-m-a1-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll0-phi0",
-						     "clk-m-a1-pll0-phi1",
-						     "clk-m-a1-pll0-phi2",
-						     "clk-m-a1-pll0-phi3";
-			};
-
-			clk_m_a1_pll1: clk-m-a1-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll1-phi0",
-						     "clk-m-a1-pll1-phi1",
-						     "clk-m-a1-pll1-phi2",
-						     "clk-m-a1-pll1-phi3";
-			};
-
-			clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-osc-prediv";
-			};
-
-			clk_m_a1_div0: clk-m-a1-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-fdma-12",
-						     "clk-m-fdma-10",
-						     "clk-m-fdma-11",
-						     "clk-m-hva-lmi",
-						     "clk-m-proc-sc",
-						     "clk-m-tp",
-						     "clk-m-icn-gpu",
-						     "clk-m-icn-vdp-0";
-			};
-
-			clk_m_a1_div1: clk-m-a1-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "clk-m-icn-vdp-1",
-						     "clk-m-icn-vdp-2",
-						     "clk-m-icn-vdp-3",
-						     "clk-m-prv-t1-bus",
-						     "clk-m-icn-vdp-4",
-						     "clk-m-icn-reg-10",
-						     "", /* Unused */
-						     ""; /* clk-m-icn-st231 */
-			};
-
-			clk_m_a1_div2: clk-m-a1-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-fvdp-proc-alt",
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* Unused */
-			};
-
-			clk_m_a1_div3: clk-m-a1-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* Unused */
-			};
-		};
-
-		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a0_div1 2>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		clockgen-a@fd345000 {
-			reg = <0xfd345000 0xb50>;
-
-			clk_m_a2_pll0: clk-m-a2-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll0-phi0",
-						     "clk-m-a2-pll0-phi1",
-						     "clk-m-a2-pll0-phi2",
-						     "clk-m-a2-pll0-phi3";
-			};
-
-			clk_m_a2_pll1: clk-m-a2-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll1-phi0",
-						     "clk-m-a2-pll1-phi1",
-						     "clk-m-a2-pll1-phi2",
-						     "clk-m-a2-pll1-phi3";
-			};
-
-			clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-osc-prediv";
-			};
-
-			clk_m_a2_div0: clk-m-a2-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-vtac-main-phy",
-						     "clk-m-vtac-aux-phy",
-						     "clk-m-stac-phy",
-						     "clk-m-stac-sys",
-						     "", /* clk-m-mpestac-pg */
-						     "", /* clk-m-mpestac-wc */
-						     "", /* clk-m-mpevtacaux-pg*/
-						     ""; /* clk-m-mpevtacmain-pg*/
-			};
-
-			clk_m_a2_div1: clk-m-a2-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "", /* clk-m-mpevtacrx0-wc */
-						     "", /* clk-m-mpevtacrx1-wc */
-						     "clk-m-compo-main",
-						     "clk-m-compo-aux",
-						     "clk-m-bdisp-0",
-						     "clk-m-bdisp-1",
-						     "clk-m-icn-bdisp-0",
-						     "clk-m-icn-bdisp-1";
-			};
-
-			clk_m_a2_div2: clk-m-a2-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "", /* clk-m-icn-hqvdp0 */
-						     "", /* clk-m-icn-hqvdp1 */
-						     "clk-m-icn-compo",
-						     "", /* clk-m-icn-vdpaux */
-						     "clk-m-icn-ts",
-						     "clk-m-icn-reg-lp-10",
-						     "clk-m-dcephy-impctrl",
-						     ""; /* Unused */
-			};
-
-			clk_m_a2_div3: clk-m-a2-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = ""; /* Unused */
-						/* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * A9 PLL
-		 */
-		clockgen-a9@fdde00d8 {
-			reg = <0xfdde00d8 0x70>;
-
-			clockgen_a9_pll: clockgen-a9-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-a9-pll-odf";
-			};
-		};
-
-		/*
-		 * ARM CPU related clocks
-		 */
-		clk_m_a9: clk-m-a9@fdde00d8 {
-			#clock-cells = <0>;
-			compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0xfdde00d8 0x4>;
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_m_a0_div1 2>,
-				 <&clk_m_a9_ext2f_div2>;
-		};
-
-		/*
-		 * ARM Peripheral clock for timers
-		 */
-		arm_periph_clk: clk-m-a9-periphs {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a9>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-};
diff --git a/src/arm/stih415-pinctrl.dtsi b/src/arm/stih415-pinctrl.dtsi
deleted file mode 100644
index 8509a037ae21..000000000000
--- a/src/arm/stih415-pinctrl.dtsi
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "st-pincfg.h"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-
-	aliases {
-		gpio0	= &PIO0;
-		gpio1	= &PIO1;
-		gpio2	= &PIO2;
-		gpio3	= &PIO3;
-		gpio4	= &PIO4;
-		gpio5	= &PIO5;
-		gpio6	= &PIO6;
-		gpio7	= &PIO7;
-		gpio8	= &PIO8;
-		gpio9	= &PIO9;
-		gpio10	= &PIO10;
-		gpio11	= &PIO11;
-		gpio12	= &PIO12;
-		gpio13	= &PIO13;
-		gpio14	= &PIO14;
-		gpio15	= &PIO15;
-		gpio16	= &PIO16;
-		gpio17	= &PIO17;
-		gpio18	= &PIO18;
-		gpio19	= &PIO100;
-		gpio20	= &PIO101;
-		gpio21	= &PIO102;
-		gpio22	= &PIO103;
-		gpio23	= &PIO104;
-		gpio24	= &PIO105;
-		gpio25	= &PIO106;
-		gpio26	= &PIO107;
-	};
-
-	soc {
-		pin-controller-sbc {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-sbc-pinctrl";
-			st,syscfg	= <&syscfg_sbc>;
-			reg 		= <0xfe61f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges 		= <0 0xfe610000 0x5000>;
-
-			PIO0: gpio@fe610000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO0";
-			};
-			PIO1: gpio@fe611000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO1";
-			};
-			PIO2: gpio@fe612000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO2";
-			};
-			PIO3: gpio@fe613000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO3";
-			};
-			PIO4: gpio@fe614000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO4";
-			};
-
-			sbc_serial1 {
-				pinctrl_sbc_serial1:sbc_serial1 {
-					st,pins {
-						tx	= <&PIO2 6 ALT3 OUT>;
-						rx	= <&PIO2 7 ALT3 IN>;
-					};
-				};
-			};
-
-			keyscan {
-				pinctrl_keyscan: keyscan {
-					st,pins {
-						keyin0 = <&PIO0 2 ALT2 IN>;
-						keyin1 = <&PIO0 3 ALT2 IN>;
-						keyin2 = <&PIO0 4 ALT2 IN>;
-						keyin3 = <&PIO2 6 ALT2 IN>;
-
-						keyout0 = <&PIO1 6 ALT2 OUT>;
-						keyout1 = <&PIO1 7 ALT2 OUT>;
-						keyout2 = <&PIO0 6 ALT2 OUT>;
-						keyout3 = <&PIO2 7 ALT2 OUT>;
-					};
-				};
-			};
-
-			sbc_i2c0 {
-				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
-					st,pins {
-						sda = <&PIO4 6 ALT1 BIDIR>;
-						scl = <&PIO4 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			sbc_i2c1 {
-				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
-					st,pins {
-						sda = <&PIO3 2 ALT2 BIDIR>;
-						scl = <&PIO3 1 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			rc{
-				pinctrl_ir: ir0 {
-					st,pins {
-						ir = <&PIO4 0 ALT2 IN>;
-					};
-				};
-			};
-
-			gmac1 {
-				pinctrl_mii1: mii1 {
-						st,pins {
-						 txd0   = <&PIO0 0 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd1   = <&PIO0 1 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd2   = <&PIO0 2 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txd3   = <&PIO0 3 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txer   = <&PIO0 4 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txen   = <&PIO0 5 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
-						 txclk  = <&PIO0 6 ALT1 IN   NICLK	0	CLK_A>;
-						 col    = <&PIO0 7 ALT1 IN   BYPASS	1000>;
-						 mdio   = <&PIO1 0 ALT1 OUT  BYPASS	0>;
-						 mdc    = <&PIO1 1 ALT1 OUT  NICLK	0	CLK_A>;
-						 crs    = <&PIO1 2 ALT1 IN   BYPASS	1000>;
-						 mdint  = <&PIO1 3 ALT1 IN   BYPASS	0>;
-						 rxd0   = <&PIO1 4 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd1   = <&PIO1 5 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd2   = <&PIO1 6 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxd3   = <&PIO1 7 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxdv   = <&PIO2 0 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rx_er  = <&PIO2 1 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
-						 rxclk  = <&PIO2 2 ALT1 IN   NICLK	0	CLK_A>;
-						 phyclk = <&PIO2 3 ALT1 IN   NICLK	1000	CLK_A>;
-					};
-				};
-
-				pinctrl_rgmii1: rgmii1-0 {
-					st,pins {
-						 txd0 =	 <&PIO0 0 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd1 =	 <&PIO0 1 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd2 =	 <&PIO0 2 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txd3 =	 <&PIO0 3 ALT1 OUT DE_IO	1000	CLK_A>;
-						 txen =	 <&PIO0 5 ALT1 OUT DE_IO	0	CLK_A>;
-						 txclk = <&PIO0 6 ALT1 IN	NICLK	0	CLK_A>;
-						 mdio =	 <&PIO1 0 ALT1 OUT	BYPASS	0>;
-						 mdc =	 <&PIO1 1 ALT1 OUT	NICLK	0	CLK_A>;
-						 rxd0 =	 <&PIO1 4 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd1 =	 <&PIO1 5 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd2 =	 <&PIO1 6 ALT1 IN DE_IO	0	CLK_A>;
-						 rxd3 =	 <&PIO1 7 ALT1 IN DE_IO	0	CLK_A>;
-
-						 rxdv =	  <&PIO2 0 ALT1 IN DE_IO	500	CLK_A>;
-						 rxclk =  <&PIO2 2 ALT1 IN	NICLK	0	CLK_A>;
-						 phyclk = <&PIO2 3 ALT4 OUT	NICLK	0	CLK_B>;
-
-						 clk125= <&PIO3 7 ALT4 IN 	NICLK	0	CLK_A>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-front-pinctrl";
-			st,syscfg	= <&syscfg_front>;
-			reg 		= <0xfee0f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfee00000 0x8000>;
-
-			PIO5: gpio@fee00000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO5";
-			};
-			PIO6: gpio@fee01000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO6";
-			};
-			PIO7: gpio@fee02000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO7";
-			};
-			PIO8: gpio@fee03000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO8";
-			};
-			PIO9: gpio@fee04000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO9";
-			};
-			PIO10: gpio@fee05000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO10";
-			};
-			PIO11: gpio@fee06000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x6000 0x100>;
-				st,bank-name	= "PIO11";
-			};
-			PIO12: gpio@fee07000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x7000 0x100>;
-				st,bank-name	= "PIO12";
-			};
-
-			i2c0 {
-				pinctrl_i2c0_default: i2c0-default {
-					st,pins {
-						sda = <&PIO9 3 ALT1 BIDIR>;
-						scl = <&PIO9 2 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			i2c1 {
-				pinctrl_i2c1_default: i2c1-default {
-					st,pins {
-						sda = <&PIO12 1 ALT1 BIDIR>;
-						scl = <&PIO12 0 ALT1 BIDIR>;
-					};
-				};
-			};
-		};
-
-		pin-controller-rear {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-rear-pinctrl";
-			st,syscfg	= <&syscfg_rear>;
-			reg 		= <0xfe82f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfe820000 0x8000>;
-
-			PIO13: gpio@fe820000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO13";
-			};
-			PIO14: gpio@fe821000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO14";
-			};
-			PIO15: gpio@fe822000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO15";
-			};
-			PIO16: gpio@fe823000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO16";
-			};
-			PIO17: gpio@fe824000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO17";
-			};
-			PIO18: gpio@fe825000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO18";
-			};
-
-			serial2 {
-				pinctrl_serial2: serial2-0 {
-					st,pins {
-						tx	= <&PIO17 4 ALT2 OUT>;
-						rx	= <&PIO17 5 ALT2 IN>;
-					};
-				};
-			};
-
-			gmac0{
-				pinctrl_mii0: mii0 {
-					st,pins {
-					 mdint =	<&PIO13 6 ALT2	IN	BYPASS		0>;
-					 txen =		<&PIO13 7 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-
-					 txd0 =		<&PIO14 0 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 txd1 =		<&PIO14 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 txd2 =		<&PIO14 2 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
-					 txd3 =		<&PIO14 3 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
-
-					 txclk =	<&PIO15 0 ALT2	IN	NICLK		0	CLK_A>;
-					 txer =		<&PIO15 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
-					 crs =		<&PIO15 2 ALT2	IN	BYPASS		1000>;
-					 col =		<&PIO15 3 ALT2	IN	BYPASS		1000>;
-					 mdio  =        <&PIO15 4 ALT2	OUT	BYPASS 	3000>;
-					 mdc   =        <&PIO15 5 ALT2	OUT     NICLK  	0    	CLK_B>;
-
-					 rxd0 =		<&PIO16 0 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd1 =		<&PIO16 1 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd2 =		<&PIO16 2 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxd3 =		<&PIO16 3 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxdv =		<&PIO15 6 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rx_er =	<&PIO15 7 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
-					 rxclk =	<&PIO17 0 ALT2	IN	NICLK		0	CLK_A>;
-					 phyclk =	<&PIO13 5 ALT2	OUT	NICLK	1000	CLK_A>;
-
-					};
-				};
-
-			pinctrl_gmii0: gmii0 {
-				st,pins {
-					 mdint =	<&PIO13 6	ALT2 IN		BYPASS	0>;
-					 mdio  =        <&PIO15 4 	ALT2 OUT	BYPASS 	3000>;
-					 mdc   =        <&PIO15 5 	ALT2 OUT    	NICLK  	0    	CLK_B>;
-					 txen =		<&PIO13 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-
-					 txd0 =		<&PIO14 0	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-					 txd1 =		<&PIO14 1	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
-					 txd2 =		<&PIO14 2	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd3 =		<&PIO14 3	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd4 =		<&PIO14 4	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd5 =		<&PIO14 5	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd6 =		<&PIO14 6	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-					 txd7 =		<&PIO14 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
-
-					 txclk =	<&PIO15 0	ALT2 IN		NICLK	0	CLK_A>;
-					 txer =		<&PIO15 1	ALT2 OUT 	SE_NICLK_IO	3000	CLK_A>;
-					 crs =		<&PIO15 2	ALT2 IN		BYPASS	1000>;
-					 col =		<&PIO15 3	ALT2 IN		BYPASS	1000>;
-					 rxdv =		<&PIO15 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rx_er =	<&PIO15 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-
-					 rxd0 =		<&PIO16 0	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd1 =		<&PIO16 1	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd2 =		<&PIO16 2	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd3 =		<&PIO16 3	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd4 =		<&PIO16 4	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd5 =		<&PIO16 5	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd6 =		<&PIO16 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-					 rxd7 =		<&PIO16 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
-
-					 rxclk =	<&PIO17 0	ALT2 IN	NICLK	0	CLK_A>;
-					 clk125 =	<&PIO17 6	ALT1 IN	NICLK	0	CLK_A>;
-                                         phyclk =       <&PIO13 5       ALT4 OUT NICLK   0       CLK_B>;
-
-
-					};
-				};
-			};
-		};
-
-		pin-controller-left {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-left-pinctrl";
-			st,syscfg	= <&syscfg_left>;
-			reg 		= <0xfd6bf080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfd6b0000 0x3000>;
-
-			PIO100: gpio@fd6b0000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO100";
-			};
-			PIO101: gpio@fd6b1000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO101";
-			};
-			PIO102: gpio@fd6b2000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO102";
-			};
-		};
-
-		pin-controller-right {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih415-right-pinctrl";
-			st,syscfg	= <&syscfg_right>;
-			reg 		= <0xfd33f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfd330000 0x5000>;
-
-			PIO103: gpio@fd330000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO103";
-			};
-			PIO104: gpio@fd331000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO104";
-			};
-			PIO105: gpio@fd332000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO105";
-			};
-			PIO106: gpio@fd333000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO106";
-			};
-			PIO107: gpio@fd334000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO107";
-			};
-		};
-	};
-};
diff --git a/src/arm/stih415.dtsi b/src/arm/stih415.dtsi
deleted file mode 100644
index a0f6f75fe3b5..000000000000
--- a/src/arm/stih415.dtsi
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih41x.dtsi"
-#include "stih415-clock.dtsi"
-#include "stih415-pinctrl.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset-controller/stih415-resets.h>
-/ {
-
-	L2: cache-controller {
-		compatible = "arm,pl310-cache";
-		reg = <0xfffe2000 0x1000>;
-		arm,data-latency = <3 2 2>;
-		arm,tag-latency = <1 1 1>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-		compatible	= "simple-bus";
-
-		powerdown: powerdown-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih415-powerdown";
-		};
-
-		softreset: softreset-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih415-softreset";
-		};
-
-		syscfg_sbc: sbc-syscfg@fe600000{
-			compatible      = "st,stih415-sbc-syscfg", "syscon";
-			reg		= <0xfe600000 0xb4>;
-		};
-
-		syscfg_front: front-syscfg@fee10000{
-			compatible      = "st,stih415-front-syscfg", "syscon";
-			reg		= <0xfee10000 0x194>;
-		};
-
-		syscfg_rear: rear-syscfg@fe830000{
-			compatible      = "st,stih415-rear-syscfg", "syscon";
-			reg		= <0xfe830000 0x190>;
-		};
-
-		/* MPE syscfgs */
-		syscfg_left: left-syscfg@fd690000{
-			compatible      = "st,stih415-left-syscfg", "syscon";
-			reg		= <0xfd690000 0x78>;
-		};
-
-		syscfg_right: right-syscfg@fd320000{
-			compatible      = "st,stih415-right-syscfg", "syscon";
-			reg		= <0xfd320000 0x180>;
-		};
-
-		syscfg_system: system-syscfg@fdde0000  {
-			compatible      = "st,stih415-system-syscfg", "syscon";
-			reg		= <0xfdde0000 0x15c>;
-		};
-
-		syscfg_lpm: lpm-syscfg@fe4b5100{
-			compatible      = "st,stih415-lpm-syscfg", "syscon";
-			reg		= <0xfe4b5100 0x08>;
-		};
-
-		serial2: serial@fed32000 {
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfed32000 0x2c>;
-			interrupts	= <0 197 0>;
-			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_serial2>;
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-		};
-
-		/* SBC comms block ASCs in SASG1 */
-		sbc_serial1: serial@fe531000 {
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfe531000 0x2c>;
-			interrupts	= <0 210 0>;
-			clocks		= <&clk_sysin>;
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_sbc_serial1>;
-		};
-
-		i2c@fed40000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed40000 0x110>;
-			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fed41000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed41000 0x110>;
-			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe540000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe540000 0x110>;
-			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe541000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe541000 0x110>;
-			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		ethernet0: dwmac@fe810000 {
-			device_type 	= "network";
-			compatible	= "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
-			status 		= "disabled";
-
-			reg 		= <0xfe810000 0x8000>, <0x148 0x4>;
-			reg-names	= "stmmaceth", "sti-ethconf";
-
-			interrupts 	= <0 147 0>, <0 148 0>, <0 149 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-			resets			= <&softreset STIH415_ETH0_SOFTRESET>;
-			reset-names		= "stmmaceth";
-
-			snps,pbl 	= <32>;
-			snps,mixed-burst;
-			snps,force_sf_dma_mode;
-
-			st,syscon	= <&syscfg_rear>;
-
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii0>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
-		};
-
-		ethernet1: dwmac@fef08000 {
-			device_type = "network";
-			compatible	= "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
-			status 		= "disabled";
-			reg		= <0xfef08000 0x8000>, <0x74 0x4>;
-			reg-names	= "stmmaceth", "sti-ethconf";
-			interrupts 	= <0 150 0>, <0 151 0>, <0 152 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-
-			snps,pbl	= <32>;
-			snps,mixed-burst;
-			snps,force_sf_dma_mode;
-
-			st,syscon		= <&syscfg_sbc>;
-
-			resets			= <&softreset STIH415_ETH1_SOFTRESET>;
-			reset-names		= "stmmaceth";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii1>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
-		};
-
-		rc: rc@fe518000 {
-			compatible	= "st,comms-irb";
-			reg		= <0xfe518000 0x234>;
-			interrupts	=  <0 203 0>;
-			clocks		= <&clk_sysin>;
-			rx-mode		= "infrared";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_ir>;
-			resets		= <&softreset STIH415_IRB_SOFTRESET>;
-		};
-
-		keyscan: keyscan@fe4b0000 {
-			compatible = "st,sti-keyscan";
-			status = "disabled";
-			reg = <0xfe4b0000 0x2000>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
-			clocks = <&clk_sysin>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_keyscan>;
-			resets	= <&powerdown STIH415_KEYSCAN_POWERDOWN>,
-				  <&softreset STIH415_KEYSCAN_SOFTRESET>;
-		};
-	};
-};
diff --git a/src/arm/stih416-b2000.dts b/src/arm/stih416-b2000.dts
deleted file mode 100644
index 488e80a5d69d..000000000000
--- a/src/arm/stih416-b2000.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih416.dtsi"
-#include "stih41x-b2000.dtsi"
-/ {
-	model = "STiH416 B2000";
-	compatible = "st,stih416-b2000", "st,stih416";
-};
diff --git a/src/arm/stih416-b2020.dts b/src/arm/stih416-b2020.dts
deleted file mode 100644
index 4e2df66b99ea..000000000000
--- a/src/arm/stih416-b2020.dts
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih416.dtsi"
-#include "stih41x-b2020.dtsi"
-/ {
-	model = "STiH416 B2020";
-	compatible = "st,stih416-b2020", "st,stih416";
-};
diff --git a/src/arm/stih416-b2020e.dts b/src/arm/stih416-b2020e.dts
deleted file mode 100644
index ba0fa2caaf18..000000000000
--- a/src/arm/stih416-b2020e.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Lee Jones <lee.jones@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/dts-v1/;
-#include "stih416.dtsi"
-#include "stih41x-b2020.dtsi"
-/ {
-	model = "STiH416 B2020 REV-E";
-	compatible = "st,stih416-b2020", "st,stih416";
-
-	soc {
-		leds {
-			compatible = "gpio-leds";
-			red {
-				#gpio-cells		= <1>;
-				label			= "Front Panel LED";
-				gpios			= <&PIO4 1>;
-				linux,default-trigger	= "heartbeat";
-			};
-			green {
-				gpios			= <&PIO1 3>;
-				default-state 		= "off";
-			};
-		};
-
-		ethernet1: dwmac@fef08000 {
-			snps,reset-gpio = <&PIO0 7>;
-		};
-	};
-};
diff --git a/src/arm/stih416-clock.dtsi b/src/arm/stih416-clock.dtsi
deleted file mode 100644
index 5b4fb838cddb..000000000000
--- a/src/arm/stih416-clock.dtsi
+++ /dev/null
@@ -1,756 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics R&D Limited
- * <stlinux-devel@stlinux.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <dt-bindings/clock/stih416-clks.h>
-
-/ {
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed 30MHz oscillator inputs to SoC
-		 */
-		clk_sysin: clk-sysin {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <30000000>;
-		};
-
-		/*
-		 * ClockGenAs on SASG2
-		 */
-		clockgen-a@fee62000 {
-			reg = <0xfee62000 0xb48>;
-
-			clk_s_a0_pll: clk-s-a0-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll0-hs",
-						     "clk-s-a0-pll0-ls",
-						     "clk-s-a0-pll1";
-			};
-
-			clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-osc-prediv";
-			};
-
-			clk_s_a0_hs: clk-s-a0-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 0>, /* PLL0 HS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-fdma-0",
-						     "clk-s-fdma-1",
-						     ""; /* clk-s-jit-sense */
-						     /* Fourth output unused */
-			};
-
-			clk_s_a0_ls: clk-s-a0-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a0_osc_prediv>,
-					 <&clk_s_a0_pll 1>, /* PLL0 LS */
-					 <&clk_s_a0_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-reg-0",
-						     "clk-s-icn-if-0",
-						     "clk-s-icn-reg-lp-0",
-						     "clk-s-emiss",
-						     "clk-s-eth1-phy",
-						     "clk-s-mii-ref-out";
-						     /* Remaining outputs unused */
-			};
-		};
-
-		clockgen-a@fee81000 {
-			reg = <0xfee81000 0xb48>;
-
-			clk_s_a1_pll: clk-s-a1-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-plls-c65";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-pll0-hs",
-						     "clk-s-a1-pll0-ls",
-						     "clk-s-a1-pll1";
-			};
-
-			clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c65",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a1-osc-prediv";
-			};
-
-			clk_s_a1_hs: clk-s-a1-hs {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-hs",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 0>, /* PLL0 HS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "", /* Reserved */
-						     "", /* Reserved */
-						     "clk-s-stac-phy",
-						     "clk-s-vtac-tx-phy";
-			};
-
-			clk_s_a1_ls: clk-s-a1-ls {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c65-ls",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_s_a1_osc_prediv>,
-					 <&clk_s_a1_pll 1>, /* PLL0 LS */
-					 <&clk_s_a1_pll 2>; /* PLL1 */
-
-				clock-output-names = "clk-s-icn-if-2",
-						     "clk-s-card-mmc-0",
-						     "clk-s-icn-if-1",
-						     "clk-s-gmac0-phy",
-						     "clk-s-nand-ctrl",
-						     "", /* Reserved */
-						     "clk-s-mii0-ref-out",
-						     "clk-s-stac-sys",
-						     "clk-s-card-mmc-1";
-						     /* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * ClockGenAs on MPE42
-		 */
-		clockgen-a@fde12000 {
-			reg = <0xfde12000 0xb50>;
-
-			clk_m_a0_pll0: clk-m-a0-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll0-phi0",
-						     "clk-m-a0-pll0-phi1",
-						     "clk-m-a0-pll0-phi2",
-						     "clk-m-a0-pll0-phi3";
-			};
-
-			clk_m_a0_pll1: clk-m-a0-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-pll1-phi0",
-						     "clk-m-a0-pll1-phi1",
-						     "clk-m-a0-pll1-phi2",
-						     "clk-m-a0-pll1-phi3";
-			};
-
-			clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a0-osc-prediv";
-			};
-
-			clk_m_a0_div0: clk-m-a0-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-fdma-12",
-						     "", /* Unused */
-						     "clk-m-pp-dmu-0",
-						     "clk-m-pp-dmu-1",
-						     "clk-m-icm-lmi",
-						     "clk-m-vid-dmu-0";
-			};
-
-			clk_m_a0_div1: clk-m-a0-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "clk-m-vid-dmu-1",
-						     "", /* Unused */
-						     "clk-m-a9-ext2f",
-						     "clk-m-st40rt",
-						     "clk-m-st231-dmu-0",
-						     "clk-m-st231-dmu-1",
-						     "clk-m-st231-aud",
-						     "clk-m-st231-gp-0";
-			};
-
-			clk_m_a0_div2: clk-m-a0-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-st231-gp-1",
-						     "clk-m-icn-cpu",
-						     "clk-m-icn-stac",
-						     "clk-m-tx-icn-dmu-0",
-						     "clk-m-tx-icn-dmu-1",
-						     "clk-m-tx-icn-ts",
-						     "clk-m-icn-vdp-0",
-						     "clk-m-icn-vdp-1";
-			};
-
-			clk_m_a0_div3: clk-m-a0-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a0_osc_prediv>,
-					 <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "clk-m-icn-vp8",
-						     "", /* Unused */
-						     "clk-m-icn-reg-11",
-						     "clk-m-a9-trace";
-			};
-		};
-
-		clockgen-a@fd6db000 {
-			reg = <0xfd6db000 0xb50>;
-
-			clk_m_a1_pll0: clk-m-a1-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll0-phi0",
-						     "clk-m-a1-pll0-phi1",
-						     "clk-m-a1-pll0-phi2",
-						     "clk-m-a1-pll0-phi3";
-			};
-
-			clk_m_a1_pll1: clk-m-a1-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-pll1-phi0",
-						     "clk-m-a1-pll1-phi1",
-						     "clk-m-a1-pll1-phi2",
-						     "clk-m-a1-pll1-phi3";
-			};
-
-			clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a1-osc-prediv";
-			};
-
-			clk_m_a1_div0: clk-m-a1-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "", /* Unused */
-						     "clk-m-fdma-10",
-						     "clk-m-fdma-11",
-						     "clk-m-hva-alt",
-						     "clk-m-proc-sc",
-						     "clk-m-tp",
-						     "clk-m-rx-icn-dmu-0",
-						     "clk-m-rx-icn-dmu-1";
-			};
-
-			clk_m_a1_div1: clk-m-a1-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "clk-m-rx-icn-ts",
-						     "clk-m-rx-icn-vdp-0",
-						     "", /* Unused */
-						     "clk-m-prv-t1-bus",
-						     "clk-m-icn-reg-12",
-						     "clk-m-icn-reg-10",
-						     "", /* Unused */
-						     "clk-m-icn-st231";
-			};
-
-			clk_m_a1_div2: clk-m-a1-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-fvdp-proc-alt",
-						     "clk-m-icn-reg-13",
-						     "clk-m-tx-icn-gpu",
-						     "clk-m-rx-icn-gpu",
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* clk-m-apb-pm-12 */
-						     ""; /* Unused */
-			};
-
-			clk_m_a1_div3: clk-m-a1-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a1_osc_prediv>,
-					 <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     "", /* Unused */
-						     ""; /* clk-m-gpu-alt */
-			};
-		};
-
-		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a0_div1 2>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		clockgen-a@fd345000 {
-			reg = <0xfd345000 0xb50>;
-
-			clk_m_a2_pll0: clk-m-a2-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll0-phi0",
-						     "clk-m-a2-pll0-phi1",
-						     "clk-m-a2-pll0-phi2",
-						     "clk-m-a2-pll0-phi3";
-			};
-
-			clk_m_a2_pll1: clk-m-a2-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-pll1-phi0",
-						     "clk-m-a2-pll1-phi1",
-						     "clk-m-a2-pll1-phi2",
-						     "clk-m-a2-pll1-phi3";
-			};
-
-			clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
-				#clock-cells = <0>;
-				compatible = "st,clkgena-prediv-c32",
-					     "st,clkgena-prediv";
-
-				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-m-a2-osc-prediv";
-			};
-
-			clk_m_a2_div0: clk-m-a2-div0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf0",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
-					 <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
-
-				clock-output-names = "clk-m-vtac-main-phy",
-						     "clk-m-vtac-aux-phy",
-						     "clk-m-stac-phy",
-						     "clk-m-stac-sys",
-						     "", /* clk-m-mpestac-pg */
-						     "", /* clk-m-mpestac-wc */
-						     "", /* clk-m-mpevtacaux-pg*/
-						     ""; /* clk-m-mpevtacmain-pg*/
-			};
-
-			clk_m_a2_div1: clk-m-a2-div1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf1",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
-					 <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
-
-				clock-output-names = "", /* clk-m-mpevtacrx0-wc */
-						     "", /* clk-m-mpevtacrx1-wc */
-						     "clk-m-compo-main",
-						     "clk-m-compo-aux",
-						     "clk-m-bdisp-0",
-						     "clk-m-bdisp-1",
-						     "clk-m-icn-bdisp",
-						     "clk-m-icn-compo";
-			};
-
-			clk_m_a2_div2: clk-m-a2-div2 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf2",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
-					 <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
-
-				clock-output-names = "clk-m-icn-vdp-2",
-						     "", /* Unused */
-						     "clk-m-icn-reg-14",
-						     "clk-m-mdtp",
-						     "clk-m-jpegdec",
-						     "", /* Unused */
-						     "clk-m-dcephy-impctrl",
-						     ""; /* Unused */
-			};
-
-			clk_m_a2_div3: clk-m-a2-div3 {
-				#clock-cells = <1>;
-				compatible = "st,clkgena-divmux-c32-odf3",
-					     "st,clkgena-divmux";
-
-				clocks = <&clk_m_a2_osc_prediv>,
-					 <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
-					 <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
-
-				clock-output-names = "", /* Unused */
-						     ""; /* clk-m-apb-pm-11 */
-						     /* Remaining outputs unused */
-			};
-		};
-
-		/*
-		 * A9 PLL
-		 */
-		clockgen-a9@fdde08b0 {
-			reg = <0xfdde08b0 0x70>;
-
-			clockgen_a9_pll: clockgen-a9-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-a9-pll-odf";
-			};
-		};
-
-		/*
-		 * ARM CPU related clocks
-		 */
-		clk_m_a9: clk-m-a9@fdde08ac {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0xfdde08ac 0x4>;
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_m_a0_div1 2>,
-				 <&clk_m_a9_ext2f_div2>;
-		};
-
-		/*
-		 * ARM Peripheral clock for timers
-		 */
-		arm_periph_clk: clk-m-a9-periphs {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&clk_m_a9>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/*
-		 * Frequency synthesizers on the SASG2
-		 */
-		clockgen_b0: clockgen-b0@fee108b4 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs216", "st,quadfs";
-			reg = <0xfee108b4 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-usb48",
-					     "clk-s-dss",
-					     "clk-s-stfe-frc-2",
-					     "clk-s-thsens-scard";
-		};
-
-		clockgen_b1: clockgen-b1@fe8308c4 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs216", "st,quadfs";
-			reg = <0xfe8308c4 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-pcm-0",
-					     "clk-s-pcm-1",
-					     "clk-s-pcm-2",
-					     "clk-s-pcm-3";
-		};
-
-		clockgen_c: clockgen-c@fe8307d0 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs432", "st,quadfs";
-			reg = <0xfe8307d0 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-c-fs0-ch0",
-					     "clk-s-c-vcc-sd",
-					     "clk-s-c-fs0-ch2";
-		};
-
-		clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux";
-			reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */
-
-			clocks = <&clk_sysin>,
-				 <&clockgen_c 0>;
-		};
-
-		/*
-		 * Add a dummy clock for the HDMI PHY for the VCC input mux
-		 */
-		clk_s_tmds_fromphy: clk-s-tmds-fromphy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		clockgen_c_vcc: clockgen-c-vcc@fe8308ac {
-			#clock-cells = <1>;
-			compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
-			reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */
-
-			clocks = <&clk_s_vcc_hd>,
-				 <&clockgen_c 1>,
-				 <&clk_s_tmds_fromphy>,
-				 <&clockgen_c 2>;
-
-			clock-output-names  = "clk-s-pix-hdmi",
-					      "clk-s-pix-dvo",
-					      "clk-s-out-dvo",
-					      "clk-s-pix-hd",
-					      "clk-s-hddac",
-					      "clk-s-denc",
-					      "clk-s-sddac",
-					      "clk-s-pix-main",
-					      "clk-s-pix-aux",
-					      "clk-s-stfe-frc-0",
-					      "clk-s-ref-mcru",
-					      "clk-s-slave-mcru",
-					      "clk-s-tmds-hdmi",
-					      "clk-s-hdmi-reject-pll",
-					      "clk-s-thsens";
-		};
-
-		clockgen_d: clockgen-d@fee107e0 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs216", "st,quadfs";
-			reg = <0xfee107e0 0x44>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-s-ccsc",
-					     "clk-s-stfe-frc-1",
-					     "clk-s-tsout-1",
-					     "clk-s-mchi";
-		};
-
-		/*
-		 * Frequency synthesizers on the MPE42
-		 */
-		clockgen_e: clockgen-e@fd3208bc {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs660-E", "st,quadfs";
-			reg = <0xfd3208bc 0xb0>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-m-pix-mdtp-0",
-					     "clk-m-pix-mdtp-1",
-					     "clk-m-pix-mdtp-2",
-					     "clk-m-mpelpc";
-		};
-
-		clockgen_f: clockgen-f@fd320878 {
-			#clock-cells = <1>;
-			compatible = "st,stih416-quadfs660-F", "st,quadfs";
-			reg = <0xfd320878 0xf0>;
-
-			clocks = <&clk_sysin>;
-			clock-output-names = "clk-m-main-vidfs",
-					     "clk-m-hva-fs",
-					     "clk-m-fvdp-vcpu",
-					     "clk-m-fvdp-proc-fs";
-		};
-
-		clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux";
-			reg = <0xfd320910 0x4>; /* SYSCFG8580 */
-
-			clocks = <&clk_m_a1_div2 0>,
-				 <&clockgen_f 3>;
-		};
-
-		clk_m_hva: clk-m-hva@fd690868 {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
-			reg = <0xfd690868 0x4>; /* SYSCFG9538 */
-
-			clocks = <&clockgen_f 1>,
-				 <&clk_m_a1_div0 3>;
-		};
-
-		clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux";
-			reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
-
-			clocks = <&clockgen_c_vcc 7>,
-				 <&clockgen_f 0>;
-		};
-
-		clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c {
-			#clock-cells = <0>;
-			compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux";
-			reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
-
-			clocks = <&clockgen_c_vcc 8>,
-				 <&clockgen_f 1>;
-		};
-
-		/*
-		 * Add a dummy clock for the HDMIRx external signal clock
-		 */
-		clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		clockgen_f_vcc: clockgen-f-vcc@fd32086c {
-			#clock-cells = <1>;
-			compatible = "st,stih416-clkgenf", "st,clkgen-vcc";
-			reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */
-
-			clocks = <&clk_m_f_vcc_hd>,
-				 <&clk_m_f_vcc_sd>,
-				 <&clockgen_f 0>,
-				 <&clk_m_pix_hdmirx_sas>;
-
-			clock-output-names  = "clk-m-pix-main-pipe",
-					      "clk-m-pix-aux-pipe",
-					      "clk-m-pix-main-cru",
-					      "clk-m-pix-aux-cru",
-					      "clk-m-xfer-be-compo",
-					      "clk-m-xfer-pip-compo",
-					      "clk-m-xfer-aux-compo",
-					      "clk-m-vsens",
-					      "clk-m-pix-hdmirx-0",
-					      "clk-m-pix-hdmirx-1";
-		};
-
-		/*
-		 * DDR PLL
-		 */
-		clockgen-ddr@0xfdde07d8 {
-			reg = <0xfdde07d8 0x110>;
-
-			clockgen_ddr_pll: clockgen-ddr-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-ddr0",
-						     "clockgen-ddr1";
-			};
-		};
-
-		/*
-		 * GPU PLL
-		 */
-		clockgen-gpu@fd68ff00 {
-			reg = <0xfd68ff00 0x910>;
-
-			clockgen_gpu_pll: clockgen-gpu-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32";
-
-				clocks = <&clk_sysin>;
-				clock-output-names = "clockgen-gpu-pll";
-			};
-		};
-	};
-};
diff --git a/src/arm/stih416-pinctrl.dtsi b/src/arm/stih416-pinctrl.dtsi
deleted file mode 100644
index ee6c119e261e..000000000000
--- a/src/arm/stih416-pinctrl.dtsi
+++ /dev/null
@@ -1,564 +0,0 @@
-
-/*
- * Copyright (C) 2013 STMicroelectronics Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "st-pincfg.h"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-/ {
-
-	aliases {
-		gpio0	= &PIO0;
-		gpio1	= &PIO1;
-		gpio2	= &PIO2;
-		gpio3	= &PIO3;
-		gpio4	= &PIO4;
-		gpio5	= &PIO40;
-		gpio6	= &PIO5;
-		gpio7	= &PIO6;
-		gpio8	= &PIO7;
-		gpio9	= &PIO8;
-		gpio10	= &PIO9;
-		gpio11	= &PIO10;
-		gpio12	= &PIO11;
-		gpio13	= &PIO12;
-		gpio14	= &PIO30;
-		gpio15	= &PIO31;
-		gpio16	= &PIO13;
-		gpio17	= &PIO14;
-		gpio18	= &PIO15;
-		gpio19	= &PIO16;
-		gpio20	= &PIO17;
-		gpio21	= &PIO18;
-		gpio22	= &PIO100;
-		gpio23	= &PIO101;
-		gpio24	= &PIO102;
-		gpio25	= &PIO103;
-		gpio26	= &PIO104;
-		gpio27	= &PIO105;
-		gpio28	= &PIO106;
-		gpio29	= &PIO107;
-	};
-
-	soc {
-		pin-controller-sbc {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-sbc-pinctrl";
-			st,syscfg	= <&syscfg_sbc>;
-			reg 		= <0xfe61f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfe610000 0x6000>;
-
-			PIO0: gpio@fe610000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO0";
-			};
-			PIO1: gpio@fe611000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO1";
-			};
-			PIO2: gpio@fe612000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO2";
-			};
-			PIO3: gpio@fe613000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO3";
-			};
-			PIO4: gpio@fe614000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO4";
-			};
-			PIO40: gpio@fe615000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO40";
-				st,retime-pin-mask = <0x7f>;
-			};
-
-			rc{
-				pinctrl_ir: ir0 {
-					st,pins {
-						ir = <&PIO4 0 ALT2 IN>;
-					};
-				};
-			};
-			sbc_serial1 {
-				pinctrl_sbc_serial1: sbc_serial1 {
-					st,pins {
-						tx	= <&PIO2 6 ALT3 OUT>;
-						rx	= <&PIO2 7 ALT3 IN>;
-					};
-				};
-			};
-
-			keyscan {
-				pinctrl_keyscan: keyscan {
-					st,pins {
-						keyin0 = <&PIO0 2 ALT2 IN>;
-						keyin1 = <&PIO0 3 ALT2 IN>;
-						keyin2 = <&PIO0 4 ALT2 IN>;
-						keyin3 = <&PIO2 6 ALT2 IN>;
-
-						keyout0 = <&PIO1 6 ALT2 OUT>;
-						keyout1 = <&PIO1 7 ALT2 OUT>;
-						keyout2 = <&PIO0 6 ALT2 OUT>;
-						keyout3 = <&PIO2 7 ALT2 OUT>;
-					};
-				};
-			};
-
-			sbc_i2c0 {
-				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
-					st,pins {
-						sda = <&PIO4 6 ALT1 BIDIR>;
-						scl = <&PIO4 5 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			sbc_i2c1 {
-				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
-					st,pins {
-						sda = <&PIO3 2 ALT2 BIDIR>;
-						scl = <&PIO3 1 ALT2 BIDIR>;
-					};
-				};
-			};
-
-			gmac1 {
-				pinctrl_mii1: mii1 {
-					st,pins {
-						txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-						txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
-						col =   <&PIO0 7 ALT1 IN BYPASS 1000>;
-
-						mdio =  <&PIO1 0 ALT1 OUT BYPASS 1500>;
-						mdc =   <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
-						crs =   <&PIO1 2 ALT1 IN BYPASS 1000>;
-						mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
-						rxd0 =  <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 =  <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 =  <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 =  <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
-						rxdv =  <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
-						phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
-					};
-				};
-				pinctrl_rgmii1: rgmii1-0 {
-					st,pins {
-						txd0 =  <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
-						txd1 =  <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
-						txd2 =  <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
-						txd3 =  <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
-						txen =  <&PIO0 5 ALT1 OUT DE_IO 0   CLK_A>;
-						txclk = <&PIO0 6 ALT1 IN  NICLK 0   CLK_A>;
-
-						mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
-						mdc  = <&PIO1 1 ALT1 OUT NICLK  0 CLK_A>;
-						rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
-						rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
-						rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
-						rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
-
-						rxdv   = <&PIO2 0 ALT1 IN  DE_IO 500 CLK_A>;
-						rxclk  = <&PIO2 2 ALT1 IN  NICLK 0   CLK_A>;
-						phyclk = <&PIO2 3 ALT4 OUT NICLK 0   CLK_B>;
-
-						clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
-					};
-				};
-			};
-		};
-
-		pin-controller-front {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-front-pinctrl";
-			st,syscfg	= <&syscfg_front>;
-			reg 		= <0xfee0f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfee00000 0x10000>;
-
-			PIO5: gpio@fee00000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO5";
-			};
-			PIO6: gpio@fee01000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO6";
-			};
-			PIO7: gpio@fee02000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO7";
-			};
-			PIO8: gpio@fee03000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO8";
-			};
-			PIO9: gpio@fee04000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO9";
-			};
-			PIO10: gpio@fee05000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO10";
-			};
-			PIO11: gpio@fee06000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x6000 0x100>;
-				st,bank-name	= "PIO11";
-			};
-			PIO12: gpio@fee07000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x7000 0x100>;
-				st,bank-name	= "PIO12";
-			};
-			PIO30: gpio@fee08000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x8000 0x100>;
-				st,bank-name	= "PIO30";
-			};
-			PIO31: gpio@fee09000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x9000 0x100>;
-				st,bank-name	= "PIO31";
-			};
-
-			serial2-oe {
-				pinctrl_serial2_oe: serial2-1 {
-					st,pins {
-						output-enable	= <&PIO11 3 ALT2 OUT>;
-					};
-				};
-			};
-
-			i2c0 {
-				pinctrl_i2c0_default: i2c0-default {
-					st,pins {
-						sda = <&PIO9 3 ALT1 BIDIR>;
-						scl = <&PIO9 2 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			i2c1 {
-				pinctrl_i2c1_default: i2c1-default {
-					st,pins {
-						sda = <&PIO12 1 ALT1 BIDIR>;
-						scl = <&PIO12 0 ALT1 BIDIR>;
-					};
-				};
-			};
-
-			fsm {
-				pinctrl_fsm: fsm {
-					st,pins {
-						spi-fsm-clk  = <&PIO12 2 ALT1 OUT>;
-						spi-fsm-cs   = <&PIO12 3 ALT1 OUT>;
-						spi-fsm-mosi = <&PIO12 4 ALT1 OUT>;
-						spi-fsm-miso = <&PIO12 5 ALT1 IN>;
-						spi-fsm-hol  = <&PIO12 6 ALT1 OUT>;
-						spi-fsm-wp   = <&PIO12 7 ALT1 OUT>;
-					};
-				};
-			};
-		};
-
-		pin-controller-rear {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-rear-pinctrl";
-			st,syscfg	= <&syscfg_rear>;
-			reg 		= <0xfe82f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges 		= <0 0xfe820000 0x6000>;
-
-			PIO13: gpio@fe820000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO13";
-			};
-			PIO14: gpio@fe821000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO14";
-			};
-			PIO15: gpio@fe822000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO15";
-			};
-			PIO16: gpio@fe823000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO16";
-			};
-			PIO17: gpio@fe824000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO17";
-			};
-			PIO18: gpio@fe825000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x5000 0x100>;
-				st,bank-name	= "PIO18";
-				st,retime-pin-mask = <0xf>;
-			};
-
-			serial2 {
-				pinctrl_serial2: serial2-0 {
-					st,pins {
-						tx	= <&PIO17 4 ALT2 OUT>;
-						rx	= <&PIO17 5 ALT2 IN>;
-					};
-				};
-			};
-
-			gmac0 {
-				pinctrl_mii0: mii0 {
-					st,pins {
-						mdint = <&PIO13 6 ALT2 IN  BYPASS      0>;
-						txen =  <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd0 =  <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd1 =  <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						txd2 =  <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-						txd3 =  <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
-						txclk = <&PIO15 0 ALT2 IN  NICLK       0 CLK_A>;
-						txer =  <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-						crs = <&PIO15 2 ALT2 IN  BYPASS 1000>;
-						col = <&PIO15 3 ALT2 IN  BYPASS 1000>;
-						mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
-						mdc = <&PIO15 5 ALT2 OUT NICLK  0    CLK_B>;
-
-						rxd0 =  <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd1 =  <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd2 =  <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxd3 =  <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxdv =  <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-						rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
-						phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
-					};
-				};
-
-				pinctrl_gmii0: gmii0 {
-					st,pins {
-						};
-				};
-				pinctrl_rgmii0: rgmii0 {
-					st,pins {
-						 phyclk = <&PIO13  5 ALT4 OUT NICLK 0 CLK_B>;
-						 txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
-						 txd0  = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
-						 txd1  = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
-						 txd2  = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
-						 txd3  = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
-						 txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
-
-						 mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
-						 mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
-
-						 rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
-						 rxd0 =<&PIO16 0 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd1 =<&PIO16 1 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd2 =<&PIO16 2 ALT2 IN DE_IO	500 CLK_A>;
-						 rxd3  =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
-						 rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
-
-						 clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
-					};
-				};
-			};
-		};
-
-		pin-controller-fvdp-fe {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-fvdp-fe-pinctrl";
-			st,syscfg	= <&syscfg_fvdp_fe>;
-			reg 		= <0xfd6bf080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges		= <0 0xfd6b0000 0x3000>;
-
-			PIO100: gpio@fd6b0000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO100";
-			};
-			PIO101: gpio@fd6b1000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO101";
-			};
-			PIO102: gpio@fd6b2000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO102";
-			};
-		};
-
-		pin-controller-fvdp-lite {
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			compatible	= "st,stih416-fvdp-lite-pinctrl";
-			st,syscfg		= <&syscfg_fvdp_lite>;
-			reg 		= <0xfd33f080 0x4>;
-			reg-names	= "irqmux";
-			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "irqmux";
-			ranges			= <0 0xfd330000 0x5000>;
-
-			PIO103: gpio@fd330000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0 0x100>;
-				st,bank-name	= "PIO103";
-			};
-			PIO104: gpio@fd331000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x1000 0x100>;
-				st,bank-name	= "PIO104";
-			};
-			PIO105: gpio@fd332000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x2000 0x100>;
-				st,bank-name	= "PIO105";
-			};
-			PIO106: gpio@fd333000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x3000 0x100>;
-				st,bank-name	= "PIO106";
-			};
-
-			PIO107: gpio@fd334000 {
-				gpio-controller;
-				#gpio-cells	= <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg		= <0x4000 0x100>;
-				st,bank-name	= "PIO107";
-				st,retime-pin-mask = <0xf>;
-			};
-		};
-	};
-};
diff --git a/src/arm/stih416.dtsi b/src/arm/stih416.dtsi
deleted file mode 100644
index 84758d76d064..000000000000
--- a/src/arm/stih416.dtsi
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Copyright (C) 2012 STMicroelectronics Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih41x.dtsi"
-#include "stih416-clock.dtsi"
-#include "stih416-pinctrl.dtsi"
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset-controller/stih416-resets.h>
-/ {
-	L2: cache-controller {
-		compatible = "arm,pl310-cache";
-		reg = <0xfffe2000 0x1000>;
-		arm,data-latency = <3 3 3>;
-		arm,tag-latency = <2 2 2>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-		compatible	= "simple-bus";
-
-		powerdown: powerdown-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih416-powerdown";
-		};
-
-		softreset: softreset-controller {
-			#reset-cells = <1>;
-			compatible = "st,stih416-softreset";
-		};
-
-		syscfg_sbc:sbc-syscfg@fe600000{
-			compatible	= "st,stih416-sbc-syscfg", "syscon";
-			reg		= <0xfe600000 0x1000>;
-		};
-
-		syscfg_front:front-syscfg@fee10000{
-			compatible	= "st,stih416-front-syscfg", "syscon";
-			reg		= <0xfee10000 0x1000>;
-		};
-
-		syscfg_rear:rear-syscfg@fe830000{
-			compatible	= "st,stih416-rear-syscfg", "syscon";
-			reg		= <0xfe830000 0x1000>;
-		};
-
-		/* MPE */
-		syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{
-			compatible	= "st,stih416-fvdp-fe-syscfg", "syscon";
-			reg		= <0xfddf0000 0x1000>;
-		};
-
-		syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{
-			compatible	= "st,stih416-fvdp-lite-syscfg", "syscon";
-			reg		= <0xfd6a0000 0x1000>;
-		};
-
-		syscfg_cpu:cpu-syscfg@fdde0000{
-			compatible	= "st,stih416-cpu-syscfg", "syscon";
-			reg		= <0xfdde0000 0x1000>;
-		};
-
-		syscfg_compo:compo-syscfg@fd320000{
-			compatible	= "st,stih416-compo-syscfg", "syscon";
-			reg		= <0xfd320000 0x1000>;
-		};
-
-		syscfg_transport:transport-syscfg@fd690000{
-			compatible	= "st,stih416-transport-syscfg", "syscon";
-			reg		= <0xfd690000 0x1000>;
-		};
-
-		syscfg_lpm:lpm-syscfg@fe4b5100{
-			compatible	= "st,stih416-lpm-syscfg", "syscon";
-			reg		= <0xfe4b5100 0x8>;
-		};
-
-		serial2: serial@fed32000{
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfed32000 0x2c>;
-			interrupts	= <0 197 0>;
-			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
-			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_serial2 &pinctrl_serial2_oe>;
-		};
-
-		/* SBC_UART1 */
-		sbc_serial1: serial@fe531000 {
-			compatible	= "st,asc";
-			status 		= "disabled";
-			reg		= <0xfe531000 0x2c>;
-			interrupts	= <0 210 0>;
-			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_sbc_serial1>;
-			clocks          = <&clk_sysin>;
-		};
-
-		i2c@fed40000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed40000 0x110>;
-			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fed41000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfed41000 0x110>;
-			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe540000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe540000 0x110>;
-			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c0_default>;
-
-			status		= "disabled";
-		};
-
-		i2c@fe541000 {
-			compatible	= "st,comms-ssc4-i2c";
-			reg		= <0xfe541000 0x110>;
-			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
-			clocks		= <&clk_sysin>;
-			clock-names	= "ssc";
-			clock-frequency = <400000>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_sbc_i2c1_default>;
-
-			status		= "disabled";
-		};
-
-		ethernet0: dwmac@fe810000 {
-			device_type 	= "network";
-			compatible	= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
-			status 		= "disabled";
-			reg 		= <0xfe810000 0x8000>, <0x8bc 0x4>;
-			reg-names	= "stmmaceth", "sti-ethconf";
-
-			interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-
-			snps,pbl 	= <32>;
-			snps,mixed-burst;
-
-			st,syscon		= <&syscfg_rear>;
-			resets			= <&softreset STIH416_ETH0_SOFTRESET>;
-			reset-names		= "stmmaceth";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii0>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
-		};
-
-		ethernet1: dwmac@fef08000 {
-			device_type = "network";
-			compatible		= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
-			status 		= "disabled";
-			reg		= <0xfef08000 0x8000>, <0x7f0 0x4>;
-			reg-names	= "stmmaceth", "sti-ethconf";
-			interrupts = <0 136 0>, <0 137 0>, <0 138 0>;
-			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
-
-			snps,pbl	= <32>;
-			snps,mixed-burst;
-
-			st,syscon	= <&syscfg_sbc>;
-
-			resets		= <&softreset STIH416_ETH1_SOFTRESET>;
-			reset-names	= "stmmaceth";
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_mii1>;
-			clock-names	= "stmmaceth", "sti-ethclk";
-			clocks		= <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
-		};
-
-		rc: rc@fe518000 {
-			compatible	= "st,comms-irb";
-			reg		= <0xfe518000 0x234>;
-			interrupts	=  <0 203 0>;
-			rx-mode         = "infrared";
-			clocks		= <&clk_sysin>;
-			pinctrl-names 	= "default";
-			pinctrl-0	= <&pinctrl_ir>;
-			resets		= <&softreset STIH416_IRB_SOFTRESET>;
-		};
-
-		/* FSM */
-		spifsm: spifsm@fe902000 {
-			compatible	   = "st,spi-fsm";
-			reg		   = <0xfe902000 0x1000>;
-			pinctrl-0	   = <&pinctrl_fsm>;
-
-			st,syscfg	   = <&syscfg_rear>;
-			st,boot-device-reg = <0x958>;
-			st,boot-device-spi = <0x1a>;
-
-			status = "disabled";
-		};
-
-		keyscan: keyscan@fe4b0000 {
-			compatible = "st,sti-keyscan";
-			status = "disabled";
-			reg = <0xfe4b0000 0x2000>;
-			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
-			clocks = <&clk_sysin>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_keyscan>;
-			resets	= <&powerdown STIH416_KEYSCAN_POWERDOWN>,
-				  <&softreset STIH416_KEYSCAN_SOFTRESET>;
-		};
-	};
-};
diff --git a/src/arm/stih41x-b2000.dtsi b/src/arm/stih41x-b2000.dtsi
deleted file mode 100644
index b3dd6ca5c2ae..000000000000
--- a/src/arm/stih41x-b2000.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include <dt-bindings/input/input.h>
-/ {
-
-	memory{
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
-		linux,stdout-path = &serial2;
-	};
-
-	aliases {
-		ttyAS0 = &serial2;
-		ethernet0 = &ethernet0;
-		ethernet1 = &ethernet1;
-	};
-
-	soc {
-		serial2: serial@fed32000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible	= "gpio-leds";
-			fp_led {
-				#gpio-cells = <1>;
-				label	= "Front Panel LED";
-				gpios	= <&PIO105 7>;
-				linux,default-trigger	= "heartbeat";
-			};
-		};
-
-		/* HDMI Tx I2C */
-		i2c@fed41000 {
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			i2c-min-scl-pulse-width-us = <0>;
-			i2c-min-sda-pulse-width-us = <5>;
-
-			status = "okay";
-		};
-
-		ethernet0: dwmac@fe810000 {
-			status			= "okay";
-			phy-mode		= "mii";
-			pinctrl-0		= <&pinctrl_mii0>;
-
-			snps,reset-gpio 	= <&PIO106 2>;
-			snps,reset-active-low;
-			snps,reset-delays-us 	= <0 10000 10000>;
-		};
-
-		ethernet1: dwmac@fef08000 {
-			status			= "disabled";
-			phy-mode		= "mii";
-			st,tx-retime-src	= "txclk";
-
-			snps,reset-gpio 	= <&PIO4 7>;
-			snps,reset-active-low;
-			snps,reset-delays-us 	= <0 10000 10000>;
-		};
-
-		keyscan: keyscan@fe4b0000 {
-			keypad,num-rows = <4>;
-			keypad,num-columns = <4>;
-			st,debounce-us = <5000>;
-			linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
-					 MATRIX_KEY(0x00, 0x01, KEY_F9)
-					 MATRIX_KEY(0x00, 0x02, KEY_F5)
-					 MATRIX_KEY(0x00, 0x03, KEY_F1)
-					 MATRIX_KEY(0x01, 0x00, KEY_F14)
-					 MATRIX_KEY(0x01, 0x01, KEY_F10)
-					 MATRIX_KEY(0x01, 0x02, KEY_F6)
-					 MATRIX_KEY(0x01, 0x03, KEY_F2)
-					 MATRIX_KEY(0x02, 0x00, KEY_F15)
-					 MATRIX_KEY(0x02, 0x01, KEY_F11)
-					 MATRIX_KEY(0x02, 0x02, KEY_F7)
-					 MATRIX_KEY(0x02, 0x03, KEY_F3)
-					 MATRIX_KEY(0x03, 0x00, KEY_F16)
-					 MATRIX_KEY(0x03, 0x01, KEY_F12)
-					 MATRIX_KEY(0x03, 0x02, KEY_F8)
-					 MATRIX_KEY(0x03, 0x03, KEY_F4) >;
-		};
-	};
-};
diff --git a/src/arm/stih41x-b2020.dtsi b/src/arm/stih41x-b2020.dtsi
deleted file mode 100644
index d8a84295c328..000000000000
--- a/src/arm/stih41x-b2020.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih41x-b2020x.dtsi"
-/ {
-	memory{
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
-		linux,stdout-path = &sbc_serial1;
-	};
-
-	aliases {
-		ttyAS0 = &sbc_serial1;
-		ethernet1 = &ethernet1;
-	};
-	soc {
-		sbc_serial1: serial@fe531000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible	= "gpio-leds";
-			red {
-				#gpio-cells = <1>;
-				label	= "Front Panel LED";
-				gpios	= <&PIO4 1>;
-				linux,default-trigger	= "heartbeat";
-			};
-			green {
-				gpios	= <&PIO4 7>;
-				default-state = "off";
-			};
-		};
-
-		i2c@fed40000 {
-			status = "okay";
-		};
-
-		/* HDMI Tx I2C */
-		i2c@fed41000 {
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			i2c-min-scl-pulse-width-us = <0>;
-			i2c-min-sda-pulse-width-us = <5>;
-
-			status = "okay";
-		};
-
-		i2c@fe540000 {
-			status = "okay";
-		};
-
-		i2c@fe541000 {
-			status = "okay";
-		};
-
-		ethernet1: dwmac@fef08000 {
-			status			= "okay";
-			phy-mode		= "rgmii-id";
-			max-speed		= <1000>;
-			st,tx-retime-src	= "clk_125";
-			snps,reset-gpio 	= <&PIO3 0>;
-			snps,reset-active-low;
-			snps,reset-delays-us 	= <0 10000 10000>;
-
-			pinctrl-0	= <&pinctrl_rgmii1>;
-		};
-	};
-};
diff --git a/src/arm/stih41x-b2020x.dtsi b/src/arm/stih41x-b2020x.dtsi
deleted file mode 100644
index df01c1211b32..000000000000
--- a/src/arm/stih41x-b2020x.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
- * Author: Lee Jones <lee.jones@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/ {
-	soc {
-		spifsm: spifsm@fe902000 {
-			#address-cells = <1>;
-			#size-cells    = <1>;
-
-			status = "okay";
-
-			partition@0 {
-				label = "SerialFlash1";
-				reg   = <0x00000000 0x00500000>;
-			};
-
-			partition@500000 {
-				label = "SerialFlash2";
-				reg   = <0x00500000 0x00b00000>;
-			};
-		};
-	};
-};
diff --git a/src/arm/stih41x.dtsi b/src/arm/stih41x.dtsi
deleted file mode 100644
index 5cb0e63376b5..000000000000
--- a/src/arm/stih41x.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2014 STMicroelectronics Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	intc: interrupt-controller@fffe1000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0xfffe1000 0x1000>,
-		      <0xfffe0100 0x100>;
-	};
-
-	scu@fffe0000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0xfffe0000 0x1000>;
-	};
-
-	timer@fffe0200 {
-		interrupt-parent = <&intc>;
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0xfffe0200 0x100>;
-		interrupts = <1 11 0x04>;
-		clocks = <&arm_periph_clk>;
-	};
-};
diff --git a/src/arm/sun4i-a10-a1000.dts b/src/arm/sun4i-a10-a1000.dts
deleted file mode 100644
index 9e99ade35e37..000000000000
--- a/src/arm/sun4i-a10-a1000.dts
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Copyright 2013 Emilio López
- *
- * Emilio López <emilio@elopez.com.ar>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Mele A1000";
-	compatible = "mele,a1000", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			phy-supply = <&reg_emac_3v3>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			emac_power_pin_a1000: emac_power_pin@0 {
-				allwinner,pins = "PH15";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			led_pins_a1000: led_pins@0 {
-				allwinner,pins = "PH10", "PH20";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_a1000>;
-
-		red {
-			label = "a1000:red:usr";
-			gpios = <&pio 7 10 0>;
-		};
-
-		blue {
-			label = "a1000:blue:usr";
-			gpios = <&pio 7 20 0>;
-		};
-	};
-
-	reg_emac_3v3: emac-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&emac_power_pin_a1000>;
-		regulator-name = "emac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 15 0>;
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-ba10-tvbox.dts b/src/arm/sun4i-a10-ba10-tvbox.dts
deleted file mode 100644
index 1763cc7ec023..000000000000
--- a/src/arm/sun4i-a10-ba10-tvbox.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "BA10 tvbox";
-	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			usb2_vbus_pin_a: usb2_vbus_pin@0 {
-				allwinner,pins = "PH12";
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		gpio = <&pio 7 12 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-cubieboard.dts b/src/arm/sun4i-a10-cubieboard.dts
deleted file mode 100644
index 3ce56bfbc0b5..000000000000
--- a/src/arm/sun4i-a10-cubieboard.dts
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese
- * Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Cubietech Cubieboard";
-	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			led_pins_cubieboard: led_pins@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cubieboard>;
-
-		blue {
-			label = "cubieboard:blue:usr";
-			gpios = <&pio 7 21 0>; /* LED1 */
-		};
-
-		green {
-			label = "cubieboard:green:usr";
-			gpios = <&pio 7 20 0>; /* LED2 */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-hackberry.dts b/src/arm/sun4i-a10-hackberry.dts
deleted file mode 100644
index 891ea446abae..000000000000
--- a/src/arm/sun4i-a10-hackberry.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Miniand Hackberry";
-	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy0>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			phy-supply = <&reg_emac_3v3>;
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&hackberry_hogs>;
-
-			hackberry_hogs: hogs@0 {
-				allwinner,pins = "PH19";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
-					allwinner,pins = "PH12";
-					allwinner,function = "gpio_out";
-					allwinner,drive = <0>;
-					allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	reg_emac_3v3: emac-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "emac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 19 0>;
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		pinctrl-0 = <&usb2_vbus_pin_hackberry>;
-		gpio = <&pio 7 12 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-inet97fv2.dts b/src/arm/sun4i-a10-inet97fv2.dts
deleted file mode 100644
index 6b0c37812ade..000000000000
--- a/src/arm/sun4i-a10-inet97fv2.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright 2014 Open Source Support GmbH
- *
- * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "INet-97F Rev 02";
-	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-mini-xplus.dts b/src/arm/sun4i-a10-mini-xplus.dts
deleted file mode 100644
index b9ecce60f2e7..000000000000
--- a/src/arm/sun4i-a10-mini-xplus.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "PineRiver Mini X-Plus";
-	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ir0_pins_a: ir0@0 {
-				/* The ir receiver is not always populated */
-				allwinner,pull = <1>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-olinuxino-lime.dts b/src/arm/sun4i-a10-olinuxino-lime.dts
deleted file mode 100644
index d046d568f5a1..000000000000
--- a/src/arm/sun4i-a10-olinuxino-lime.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Olimex A10-OLinuXino-LIME";
-	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-				allwinner,pins = "PC3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			led_pins_olinuxinolime: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxinolime>;
-
-		green {
-			label = "a10-olinuxino-lime:green:usr";
-			gpios = <&pio 7 2 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 0>;
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10-pcduino.dts b/src/arm/sun4i-a10-pcduino.dts
deleted file mode 100644
index 6675bcd7860e..000000000000
--- a/src/arm/sun4i-a10-pcduino.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Copyright 2014 Zoltan HERPAI
- * Zoltan HERPAI <wigyori@uid0.hu>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun4i-a10.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "LinkSprite pcDuino";
-	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun4i-a10.dtsi b/src/arm/sun4i-a10.dtsi
deleted file mode 100644
index 459cb6377764..000000000000
--- a/src/arm/sun4i-a10.dtsi
+++ /dev/null
@@ -1,780 +0,0 @@
-/*
- * Copyright 2012 Stefan Roese
- * Stefan Roese <sr@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&intc>;
-
-	aliases {
-		ethernet0 = &emac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
-		ahb_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-ahb-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb>;
-			clock-output-names = "ahb_usb0", "ahb_ehci0",
-				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
-				"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-				"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
-				"ahb_sdram", "ahb_ace",	"ahb_emac", "ahb_ts",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
-				"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
-				"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
-				"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-				"ahb_de_fe1", "ahb_mp", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-apb0-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
-				"apb0_ir1", "apb0_keypad";
-		};
-
-		apb1_mux: apb1_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1_mux";
-		};
-
-		apb1: apb1@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb1_mux>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-apb1-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_can", "apb1_scr",
-				"apb1_ps20", "apb1_ps21", "apb1_uart0",
-				"apb1_uart1", "apb1_uart2", "apb1_uart3",
-				"apb1_uart4", "apb1_uart5", "apb1_uart6",
-				"apb1_uart7";
-		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		pata_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "pata";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		ir1_clk: clk@01c200b4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir1";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
-		};
-
-		spi3_clk: clk@01c200d4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200d4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi3";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-a10-emac";
-			reg = <0x01c0b000 0x1000>;
-			interrupts = <55>;
-			clocks = <&ahb_gates 17>;
-			status = "disabled";
-		};
-
-		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-a10-mdio";
-			reg = <0x01c0b080 0x14>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun4i-a10-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <32>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun4i-a10-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <33>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun4i-a10-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <34>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun4i-a10-mmc";
-			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <35>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun4i-a10-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
-			reg-names = "phy_ctrl", "pmu1", "pmu2";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 1>, <&usb_clk 2>;
-			reset-names = "usb1_reset", "usb2_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <64>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		ahci: sata@01c18000 {
-			compatible = "allwinner,sun4i-a10-ahci";
-			reg = <0x01c18000 0x1000>;
-			interrupts = <56>;
-			clocks = <&pll6 0>, <&ahb_gates 25>;
-			status = "disabled";
-		};
-
-		ehci1: usb@01c1c000 {
-			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
-			reg = <0x01c1c000 0x100>;
-			interrupts = <40>;
-			clocks = <&ahb_gates 3>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci1: usb@01c1c400 {
-			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
-			reg = <0x01c1c400 0x100>;
-			interrupts = <65>;
-			clocks = <&usb_clk 7>, <&ahb_gates 4>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi3: spi@01c1f000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c1f000 0x1000>;
-			interrupts = <50>;
-			clocks = <&ahb_gates 23>, <&spi3_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-a10-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun4i-a10-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			pwm0_pins_a: pwm0@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			pwm1_pins_a: pwm1@0 {
-				allwinner,pins = "PI3";
-				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB22", "PB23";
-				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart0_pins_b: uart0@1 {
-				allwinner,pins = "PF2", "PF4";
-				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart1_pins_a: uart1@0 {
-				allwinner,pins = "PA10", "PA11";
-				allwinner,function = "uart1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB18", "PB19";
-				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB20", "PB21";
-				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
-				allwinner,pins = "PH1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			ir0_pins_a: ir0@0 {
-				allwinner,pins = "PB3","PB4";
-				allwinner,function = "ir0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			ir1_pins_a: ir1@0 {
-				allwinner,pins = "PB22","PB23";
-				allwinner,function = "ir1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		rtc: rtc@01c20d00 {
-			compatible = "allwinner,sun4i-a10-rtc";
-			reg = <0x01c20d00 0x20>;
-			interrupts = <24>;
-		};
-
-		pwm: pwm@01c20e00 {
-			compatible = "allwinner,sun4i-a10-pwm";
-			reg = <0x01c20e00 0xc>;
-			clocks = <&osc24M>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		ir0: ir@01c21800 {
-			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 6>, <&ir0_clk>;
-			clock-names = "apb", "ir";
-			interrupts = <5>;
-			reg = <0x01c21800 0x40>;
-			status = "disabled";
-		};
-
-		ir1: ir@01c21c00 {
-			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 7>, <&ir1_clk>;
-			clock-names = "apb", "ir";
-			interrupts = <6>;
-			reg = <0x01c21c00 0x40>;
-			status = "disabled";
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-a10-sid";
-			reg = <0x01c23800 0x10>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <29>;
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <1>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 16>;
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <3>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 18>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
-
-		uart4: serial@01c29000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29000 0x400>;
-			interrupts = <17>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 20>;
-			status = "disabled";
-		};
-
-		uart5: serial@01c29400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29400 0x400>;
-			interrupts = <18>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 21>;
-			status = "disabled";
-		};
-
-		uart6: serial@01c29800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29800 0x400>;
-			interrupts = <19>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 22>;
-			status = "disabled";
-		};
-
-		uart7: serial@01c29c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29c00 0x400>;
-			interrupts = <20>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 23>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
diff --git a/src/arm/sun5i-a10s-olinuxino-micro.dts b/src/arm/sun5i-a10s-olinuxino-micro.dts
deleted file mode 100644
index ea9519da5764..000000000000
--- a/src/arm/sun5i-a10s-olinuxino-micro.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun5i-a10s.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Olimex A10s-Olinuxino Micro";
-	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
-
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 1 0>; /* PG1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc1: mmc@01c10000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 13 0>; /* PG13 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
-				allwinner,pins = "PG1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
-				allwinner,pins = "PG13";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PE3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
-				allwinner,pins = "PB10";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		uart2: serial@01c28800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart2_pins_a>;
-			status = "okay";
-		};
-
-		uart3: serial@01c28c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart3_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-
-			at24@50 {
-				compatible = "at,24c16";
-				pagesize = <16>;
-				reg = <0x50>;
-				read-only;
-			};
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxino>;
-
-		green {
-			label = "a10s-olinuxino-micro:green:usr";
-			gpios = <&pio 4 3 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
-		gpio = <&pio 1 10 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun5i-a10s-r7-tv-dongle.dts b/src/arm/sun5i-a10s-r7-tv-dongle.dts
deleted file mode 100644
index 43a93762d4f2..000000000000
--- a/src/arm/sun5i-a10s-r7-tv-dongle.dts
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun5i-a10s.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "R7 A10s hdmi tv-stick";
-	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 1 0>; /* PG1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc1: mmc@01c10000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc1_pins_a>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_r7: mmc0_cd_pin@0 {
-				allwinner,pins = "PG1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			led_pins_r7: led_pins@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin_r7: usb1_vbus_pin@0 {
-				allwinner,pins = "PG13";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_r7>;
-
-		green {
-			label = "r7-tv-dongle:green:usr";
-			gpios = <&pio 1 2 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_r7>;
-		gpio = <&pio 6 13 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun5i-a10s.dtsi b/src/arm/sun5i-a10s.dtsi
deleted file mode 100644
index 24b0ad3a7c07..000000000000
--- a/src/arm/sun5i-a10s.dtsi
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&intc>;
-
-	aliases {
-		ethernet0 = &emac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x20000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
-		ahb_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb>;
-			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
-				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
-				"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
-				"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
-				"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
-				"apb0_ir", "apb0_keypad";
-		};
-
-		apb1_mux: apb1_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1_mux";
-		};
-
-		apb1: apb1@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb1_mux>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
-				"apb1_uart2", "apb1_uart3";
-		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_phy";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-a10-emac";
-			reg = <0x01c0b000 0x1000>;
-			interrupts = <55>;
-			clocks = <&ahb_gates 17>;
-			status = "disabled";
-		};
-
-		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-a10-mdio";
-			reg = <0x01c0b080 0x14>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <32>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <33>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <34>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4>;
-			reg-names = "phy_ctrl", "pmu1";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <40>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-a10-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun5i-a10s-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB19", "PB20";
-				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart2_pins_a: uart2@0 {
-				allwinner,pins = "PC18", "PC19";
-				allwinner,function = "uart2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart3_pins_a: uart3@0 {
-				allwinner,pins = "PG9", "PG10";
-				allwinner,function = "uart3";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB15", "PB16";
-				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB17", "PB18";
-				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			mmc1_pins_a: mmc1@0 {
-				allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
-				allwinner,function = "mmc1";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-a10-sid";
-			reg = <0x01c23800 0x10>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <29>;
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <1>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 16>;
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <3>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 18>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@01c2b000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@01c2b400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		timer@01c60000 {
-			compatible = "allwinner,sun5i-a13-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <82>, <83>;
-			clocks = <&ahb_gates 28>;
-		};
-	};
-};
diff --git a/src/arm/sun5i-a13-olinuxino-micro.dts b/src/arm/sun5i-a13-olinuxino-micro.dts
deleted file mode 100644
index fa44b026483b..000000000000
--- a/src/arm/sun5i-a13-olinuxino-micro.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Olimex A13-Olinuxino Micro";
-	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 0 0>; /* PG0 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
-				allwinner,pins = "PG0";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			led_pins_olinuxinom: led_pins@0 {
-				allwinner,pins = "PG9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
-				allwinner,pins = "PG11";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart1: serial@01c28400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_pins_b>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxinom>;
-
-		power {
-			label = "a13-olinuxino-micro:green:power";
-			gpios = <&pio 6 9 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
-		gpio = <&pio 6 11 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun5i-a13-olinuxino.dts b/src/arm/sun5i-a13-olinuxino.dts
deleted file mode 100644
index 429994e1943e..000000000000
--- a/src/arm/sun5i-a13-olinuxino.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun5i-a13.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Olimex A13-Olinuxino";
-	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 0 0>; /* PG0 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-				allwinner,pins = "PG0";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PG9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
-				allwinner,pins = "PG11";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart1: serial@01c28400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_pins_b>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxino>;
-
-		power {
-			gpios = <&pio 6 9 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
-		gpio = <&pio 6 11 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun5i-a13.dtsi b/src/arm/sun5i-a13.dtsi
deleted file mode 100644
index bf86e65dd167..000000000000
--- a/src/arm/sun5i-a13.dtsi
+++ /dev/null
@@ -1,528 +0,0 @@
-/*
- * Copyright 2012 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x20000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
-		ahb_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb>;
-			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
-				"ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
-				"ahb_de_fe", "ahb_iep", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
-		};
-
-		apb1_mux: apb1_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1_mux";
-		};
-
-		apb1: apb1@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb1_mux>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun5i-a13-apb1-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_uart1", "apb1_uart3";
-		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_phy";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <32>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <34>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4>;
-			reg-names = "phy_ctrl", "pmu1";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <40>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-a10-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun5i-a13-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart1_pins_a: uart1@0 {
-				allwinner,pins = "PE10", "PE11";
-				allwinner,function = "uart1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart1_pins_b: uart1@1 {
-				allwinner,pins = "PG3", "PG4";
-				allwinner,function = "uart1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB15", "PB16";
-				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB17", "PB18";
-				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-a10-sid";
-			reg = <0x01c23800 0x10>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <29>;
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		timer@01c60000 {
-			compatible = "allwinner,sun5i-a13-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <82>, <83>;
-			clocks = <&ahb_gates 28>;
-		};
-	};
-};
diff --git a/src/arm/sun6i-a31-app4-evb1.dts b/src/arm/sun6i-a31-app4-evb1.dts
deleted file mode 100644
index 2bbf8867362b..000000000000
--- a/src/arm/sun6i-a31-app4-evb1.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright 2014 Boris Brezillon
- *
- * Boris Brezillon <boris.brezillon@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
-	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		pio: pinctrl@01c20800 {
-			usb1_vbus_pin_a: usb1_vbus_pin@0 {
-				allwinner,pins = "PH27";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		usbphy: phy@01c19400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c1a000 {
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_a>;
-		gpio = <&pio 7 27 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun6i-a31-colombus.dts b/src/arm/sun6i-a31-colombus.dts
deleted file mode 100644
index 546cf6eff5c7..000000000000
--- a/src/arm/sun6i-a31-colombus.dts
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "WITS A31 Colombus Evaluation Board";
-	compatible = "wits,colombus", "allwinner,sun6i-a31";
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 0 8 0>; /* PA8 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c19400 {
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1b000 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pull = <1>;
-			};
-
-			mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
-				allwinner,pins = "PA8";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
-				allwinner,pins = "PH24";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "fail";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_pin_colombus>;
-		gpio = <&pio 7 24 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun6i-a31-hummingbird.dts b/src/arm/sun6i-a31-hummingbird.dts
deleted file mode 100644
index f142065b3c1f..000000000000
--- a/src/arm/sun6i-a31-hummingbird.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * Copyright 2014 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Merrii A31 Hummingbird";
-	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 0 8 0>; /* PA8 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c19400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c1a000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c1a400 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			mmc0_pins_a: mmc0@0 {
-				/* external pull-ups missing for some pins */
-				allwinner,pull = <1>;
-			};
-
-			mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
-				allwinner,pins = "PA8";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			usb1_vbus_pin_a: usb1_vbus_pin@0 {
-				allwinner,pins = "PH24";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			/* pull-ups and devices require AXP221 DLDO3 */
-			status = "failed";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-
-			pcf8563: rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-
-		gmac: ethernet@01c30000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_a>;
-		gpio = <&pio 7 24 0>; /* PH24 */
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun6i-a31-m9.dts b/src/arm/sun6i-a31-m9.dts
deleted file mode 100644
index bc6115da5ae1..000000000000
--- a/src/arm/sun6i-a31-m9.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun6i-a31.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Mele M9 / A1000G Quad top set box";
-	compatible = "mele,m9", "allwinner,sun6i-a31";
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 22 0>; /* PH22 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-				allwinner,pins = "PH22";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/sun6i-a31.dtsi b/src/arm/sun6i-a31.dtsi
deleted file mode 100644
index e06fbfc55bb7..000000000000
--- a/src/arm/sun6i-a31.dtsi
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		ethernet0 = &gmac;
-	};
-
-
-	cpus {
-		enable-method = "allwinner,sun6i-a31";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <3>;
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
-		interrupts = <0 120 4>,
-			     <0 121 4>,
-			     <0 122 4>,
-			     <0 123 4>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc24M: osc24M {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6";
-		};
-
-		cpu: cpu@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1_mux: ahb1_mux@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
-			clock-output-names = "ahb1_mux";
-		};
-
-		ahb1: ahb1@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1_mux>;
-			clock-output-names = "ahb1";
-		};
-
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
-					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
-					"ahb1_nand0", "ahb1_sdram",
-					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
-					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
-					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
-					"ahb1_ehci1", "ahb1_ohci0",
-					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
-					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
-					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
-					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
-					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
-					"ahb1_drc0", "ahb1_drc1";
-		};
-
-		apb1: apb1@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_codec", "apb1_digital_mic",
-					"apb1_pio", "apb1_daudio0",
-					"apb1_daudio1";
-		};
-
-		apb2_mux: apb2_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
-			clock-output-names = "apb2_mux";
-		};
-
-		apb2: apb2@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-apb2-div-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb2_mux>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2", "apb2_uart3",
-					"apb2_uart4", "apb2_uart5";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc0";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc2";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc3";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "spi2";
-		};
-
-		spi3_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "spi3";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
-					     "usb_ohci0", "usb_ohci1",
-					     "usb_ohci2";
-		};
-
-		/*
-		 * The following two are dummy clocks, placeholders used in the gmac_tx
-		 * clock. The gmac driver will choose one parent depending on the PHY
-		 * interface mode, using clk_set_rate auto-reparenting.
-		 * The actual TX clock rate is not controlled by the gmac_tx clock.
-		 */
-		mii_phy_tx_clk: clk@1 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-			clock-output-names = "mii_phy_tx";
-		};
-
-		gmac_int_tx_clk: clk@2 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <125000000>;
-			clock-output-names = "gmac_int_tx";
-		};
-
-		gmac_tx_clk: clk@01c200d0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-gmac-clk";
-			reg = <0x01c200d0 0x4>;
-			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
-			clock-output-names = "gmac_tx";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dma: dma-controller@01c02000 {
-			compatible = "allwinner,sun6i-a31-dma";
-			reg = <0x01c02000 0x1000>;
-			interrupts = <0 50 4>;
-			clocks = <&ahb1_gates 6>;
-			resets = <&ahb1_rst 6>;
-			#dma-cells = <1>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			resets = <&ahb1_rst 8>;
-			reset-names = "ahb";
-			interrupts = <0 60 4>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
-			resets = <&ahb1_rst 9>;
-			reset-names = "ahb";
-			interrupts = <0 61 4>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			resets = <&ahb1_rst 10>;
-			reset-names = "ahb";
-			interrupts = <0 62 4>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb1_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
-			resets = <&ahb1_rst 11>;
-			reset-names = "ahb";
-			interrupts = <0 63 4>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c19400 {
-			compatible = "allwinner,sun6i-a31-usb-phy";
-			reg = <0x01c19400 0x10>,
-			      <0x01c1a800 0x4>,
-			      <0x01c1b800 0x4>;
-			reg-names = "phy_ctrl",
-				    "pmu1",
-				    "pmu2";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>,
-				 <&usb_clk 10>;
-			clock-names = "usb0_phy",
-				      "usb1_phy",
-				      "usb2_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>,
-				 <&usb_clk 2>;
-			reset-names = "usb0_reset",
-				      "usb1_reset",
-				      "usb2_reset";
-			status = "disabled";
-			#phy-cells = <1>;
-		};
-
-		ehci0: usb@01c1a000 {
-			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
-			reg = <0x01c1a000 0x100>;
-			interrupts = <0 72 4>;
-			clocks = <&ahb1_gates 26>;
-			resets = <&ahb1_rst 26>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c1a400 {
-			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
-			reg = <0x01c1a400 0x100>;
-			interrupts = <0 73 4>;
-			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
-			resets = <&ahb1_rst 29>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ehci1: usb@01c1b000 {
-			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
-			reg = <0x01c1b000 0x100>;
-			interrupts = <0 74 4>;
-			clocks = <&ahb1_gates 27>;
-			resets = <&ahb1_rst 27>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci1: usb@01c1b400 {
-			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
-			reg = <0x01c1b400 0x100>;
-			interrupts = <0 75 4>;
-			clocks = <&ahb1_gates 30>, <&usb_clk 17>;
-			resets = <&ahb1_rst 30>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci2: usb@01c1c400 {
-			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
-			reg = <0x01c1c400 0x100>;
-			interrupts = <0 77 4>;
-			clocks = <&ahb1_gates 31>, <&usb_clk 18>;
-			resets = <&ahb1_rst 31>;
-			status = "disabled";
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun6i-a31-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <0 11 4>,
-				     <0 15 4>,
-				     <0 16 4>,
-				     <0 17 4>;
-			clocks = <&apb1_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PH14", "PH15";
-				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PH16", "PH17";
-				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PH18", "PH19";
-				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_pins_mii_a: gmac_mii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA8", "PA9", "PA11",
-						"PA12", "PA13", "PA14", "PA19",
-						"PA20", "PA21", "PA22", "PA23",
-						"PA24", "PA26", "PA27";
-				allwinner,function = "gmac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_pins_gmii_a: gmac_gmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA4", "PA5", "PA6", "PA7",
-						"PA8", "PA9", "PA10", "PA11",
-						"PA12", "PA13", "PA14",	"PA15",
-						"PA16", "PA17", "PA18", "PA19",
-						"PA20", "PA21", "PA22", "PA23",
-						"PA24", "PA25", "PA26", "PA27";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in GMII mode run at 125MHz and
-				 * might need a higher signal drive strength
-				 */
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_pins_rgmii_a: gmac_rgmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
-						"PA9", "PA10", "PA11",
-						"PA12", "PA13", "PA14", "PA19",
-						"PA20", "PA25", "PA26", "PA27";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in RGMII mode use DDR mode
-				 * and need a higher signal drive strength
-				 */
-				allwinner,drive = <3>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0xa0>;
-			interrupts = <0 18 4>,
-				     <0 19 4>,
-				     <0 20 4>,
-				     <0 21 4>,
-				     <0 22 4>;
-			clocks = <&osc24M>;
-		};
-
-		wdt1: watchdog@01c20ca0 {
-			compatible = "allwinner,sun6i-a31-wdt";
-			reg = <0x01c20ca0 0x20>;
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <0 0 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
-			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <0 1 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
-			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <0 2 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
-			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <0 3 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
-			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart4: serial@01c29000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29000 0x400>;
-			interrupts = <0 4 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
-			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart5: serial@01c29400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29400 0x400>;
-			interrupts = <0 5 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 21>;
-			resets = <&apb2_rst 21>;
-			dmas = <&dma 22>, <&dma 22>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <0 6 4>;
-			clocks = <&apb2_gates 0>;
-			clock-frequency = <100000>;
-			resets = <&apb2_rst 0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <0 7 4>;
-			clocks = <&apb2_gates 1>;
-			clock-frequency = <100000>;
-			resets = <&apb2_rst 1>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <0 8 4>;
-			clocks = <&apb2_gates 2>;
-			clock-frequency = <100000>;
-			resets = <&apb2_rst 2>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c3: i2c@01c2b800 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2b800 0x400>;
-			interrupts = <0 9 4>;
-			clocks = <&apb2_gates 3>;
-			clock-frequency = <100000>;
-			resets = <&apb2_rst 3>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		gmac: ethernet@01c30000 {
-			compatible = "allwinner,sun7i-a20-gmac";
-			reg = <0x01c30000 0x1054>;
-			interrupts = <0 82 4>;
-			interrupt-names = "macirq";
-			clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
-			clock-names = "stmmaceth", "allwinner_gmac_tx";
-			resets = <&ahb1_rst 17>;
-			reset-names = "stmmaceth";
-			snps,pbl = <2>;
-			snps,fixed-burst;
-			snps,force_sf_dma_mode;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		timer@01c60000 {
-			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <0 51 4>,
-				     <0 52 4>,
-				     <0 53 4>,
-				     <0 54 4>;
-			clocks = <&ahb1_gates 19>;
-			resets = <&ahb1_rst 19>;
-		};
-
-		spi0: spi@01c68000 {
-			compatible = "allwinner,sun6i-a31-spi";
-			reg = <0x01c68000 0x1000>;
-			interrupts = <0 65 4>;
-			clocks = <&ahb1_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma 23>, <&dma 23>;
-			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 20>;
-			status = "disabled";
-		};
-
-		spi1: spi@01c69000 {
-			compatible = "allwinner,sun6i-a31-spi";
-			reg = <0x01c69000 0x1000>;
-			interrupts = <0 66 4>;
-			clocks = <&ahb1_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma 24>, <&dma 24>;
-			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 21>;
-			status = "disabled";
-		};
-
-		spi2: spi@01c6a000 {
-			compatible = "allwinner,sun6i-a31-spi";
-			reg = <0x01c6a000 0x1000>;
-			interrupts = <0 67 4>;
-			clocks = <&ahb1_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma 25>, <&dma 25>;
-			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 22>;
-			status = "disabled";
-		};
-
-		spi3: spi@01c6b000 {
-			compatible = "allwinner,sun6i-a31-spi";
-			reg = <0x01c6b000 0x1000>;
-			interrupts = <0 68 4>;
-			clocks = <&ahb1_gates 23>, <&spi3_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma 26>, <&dma 26>;
-			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 23>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@01c81000 {
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		nmi_intc: interrupt-controller@01f00c0c {
-			compatible = "allwinner,sun6i-a31-sc-nmi";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x01f00c0c 0x38>;
-			interrupts = <0 32 4>;
-		};
-
-		prcm@01f01400 {
-			compatible = "allwinner,sun6i-a31-prcm";
-			reg = <0x01f01400 0x200>;
-
-			ar100: ar100_clk {
-				compatible = "allwinner,sun6i-a31-ar100-clk";
-				#clock-cells = <0>;
-				clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
-				clock-output-names = "ar100";
-			};
-
-			ahb0: ahb0_clk {
-				compatible = "fixed-factor-clock";
-				#clock-cells = <0>;
-				clock-div = <1>;
-				clock-mult = <1>;
-				clocks = <&ar100>;
-				clock-output-names = "ahb0";
-			};
-
-			apb0: apb0_clk {
-				compatible = "allwinner,sun6i-a31-apb0-clk";
-				#clock-cells = <0>;
-				clocks = <&ahb0>;
-				clock-output-names = "apb0";
-			};
-
-			apb0_gates: apb0_gates_clk {
-				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
-				#clock-cells = <1>;
-				clocks = <&apb0>;
-				clock-output-names = "apb0_pio", "apb0_ir",
-						"apb0_timer", "apb0_p2wi",
-						"apb0_uart", "apb0_1wire",
-						"apb0_i2c";
-			};
-
-			apb0_rst: apb0_rst {
-				compatible = "allwinner,sun6i-a31-clock-reset";
-				#reset-cells = <1>;
-			};
-		};
-
-		cpucfg@01f01c00 {
-			compatible = "allwinner,sun6i-a31-cpuconfig";
-			reg = <0x01f01c00 0x300>;
-		};
-
-		r_pio: pinctrl@01f02c00 {
-			compatible = "allwinner,sun6i-a31-r-pinctrl";
-			reg = <0x01f02c00 0x400>;
-			interrupts = <0 45 4>,
-				     <0 46 4>;
-			clocks = <&apb0_gates 0>;
-			resets = <&apb0_rst 0>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-		};
-	};
-};
diff --git a/src/arm/sun7i-a20-cubieboard2.dts b/src/arm/sun7i-a20-cubieboard2.dts
deleted file mode 100644
index 53680983461a..000000000000
--- a/src/arm/sun7i-a20-cubieboard2.dts
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Cubietech Cubieboard2";
-	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			led_pins_cubieboard2: led_pins@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cubieboard2>;
-
-		blue {
-			label = "cubieboard2:blue:usr";
-			gpios = <&pio 7 21 0>;
-		};
-
-		green {
-			label = "cubieboard2:green:usr";
-			gpios = <&pio 7 20 0>;
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun7i-a20-cubietruck.dts b/src/arm/sun7i-a20-cubietruck.dts
deleted file mode 100644
index a6c1a3c717bc..000000000000
--- a/src/arm/sun7i-a20-cubietruck.dts
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright 2013 Oliver Schinagl
- *
- * Oliver Schinagl <oliver@schinagl.nl>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Cubietech Cubietruck";
-	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>;
-			vmmc-supply = <&reg_vmmc3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_pins_a: mmc3@0 {
-				/* AP6210 requires pull-up */
-				allwinner,pull = <1>;
-			};
-
-			vmmc3_pin_cubietruck: vmmc3_pin@0 {
-				allwinner,pins = "PH9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-				allwinner,pins = "PH12";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			led_pins_cubietruck: led_pins@0 {
-				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		pwm: pwm@01c20e00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
-			status = "okay";
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cubietruck>;
-
-		blue {
-			label = "cubietruck:blue:usr";
-			gpios = <&pio 7 21 0>;
-		};
-
-		orange {
-			label = "cubietruck:orange:usr";
-			gpios = <&pio 7 20 0>;
-		};
-
-		white {
-			label = "cubietruck:white:usr";
-			gpios = <&pio 7 11 0>;
-		};
-
-		green {
-			label = "cubietruck:green:usr";
-			gpios = <&pio 7 7 0>;
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
-		gpio = <&pio 7 12 0>;
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
-	reg_vmmc3: vmmc3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_cubietruck>;
-		regulator-name = "vmmc3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 9 0>;
-	};
-};
diff --git a/src/arm/sun7i-a20-i12-tvbox.dts b/src/arm/sun7i-a20-i12-tvbox.dts
deleted file mode 100644
index 6a67712d417a..000000000000
--- a/src/arm/sun7i-a20-i12-tvbox.dts
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "I12 / Q5 / QT840A A20 tvbox";
-	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>;
-			vmmc-supply = <&reg_vmmc3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_pins_a: mmc3@0 {
-				/* AP6210 / AP6330 requires pull-up */
-				allwinner,pull = <1>;
-			};
-
-			vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
-				allwinner,pins = "PH12";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
-				allwinner,pins = "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			led_pins_i12_tvbox: led_pins@0 {
-				allwinner,pins = "PH9", "PH20";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			phy-supply = <&reg_gmac_3v3>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_i12_tvbox>;
-
-		red {
-			label = "i12_tvbox:red:usr";
-			gpios = <&pio 7 9 1>;
-		};
-
-		blue {
-			label = "i12_tvbox:blue:usr";
-			gpios = <&pio 7 20 0>;
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
-	reg_vmmc3: vmmc3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
-		regulator-name = "vmmc3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 7 2 0>;
-	};
-
-	reg_vmmc3_io: vmmc3-io {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
-		regulator-name = "vmmc3-io";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		/* This controls VCC-PI, must be always on! */
-		regulator-always-on;
-		enable-active-high;
-		gpio = <&pio 7 12 0>;
-	};
-
-	reg_gmac_3v3: gmac-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
-		regulator-name = "gmac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <50000>;
-		enable-active-high;
-		gpio = <&pio 7 21 0>;
-	};
-};
diff --git a/src/arm/sun7i-a20-olinuxino-micro.dts b/src/arm/sun7i-a20-olinuxino-micro.dts
deleted file mode 100644
index 9d669cdf031d..000000000000
--- a/src/arm/sun7i-a20-olinuxino-micro.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-
-/ {
-	model = "Olimex A20-Olinuxino Micro";
-	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
-
-	aliases {
-		spi0 = &spi1;
-		spi1 = &spi2;
-	};
-
-	soc@01c00000 {
-		spi1: spi@01c06000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_pins_a>;
-			status = "okay";
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 11 0>; /* PH11 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		spi2: spi@01c17000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_pins_a>;
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
-				allwinner,pins = "PH11";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <1>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		uart6: serial@01c29800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart6_pins_a>;
-			status = "okay";
-		};
-
-		uart7: serial@01c29c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart7_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxino>;
-
-		green {
-			label = "a20-olinuxino-micro:green:usr";
-			gpios = <&pio 7 2 0>;
-			default-state = "on";
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun7i-a20-pcduino3.dts b/src/arm/sun7i-a20-pcduino3.dts
deleted file mode 100644
index 046dfc0d45d8..000000000000
--- a/src/arm/sun7i-a20-pcduino3.dts
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Copyright 2014 Zoltan HERPAI
- * Zoltan HERPAI <wigyori@uid0.hu>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "LinkSprite pcDuino3";
-	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
-
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 0>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin_a: ahci_pwr_pin@0 {
-				allwinner,pins = "PH2";
-			};
-
-			led_pins_pcduino3: led_pins@0 {
-				allwinner,pins = "PH15", "PH16";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			key_pins_pcduino3: key_pins@0 {
-				allwinner,pins = "PH17", "PH18", "PH19";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 8>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_pcduino3>;
-
-		tx {
-			label = "pcduino3:green:tx";
-			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
-		};
-
-		rx {
-			label = "pcduino3:green:rx";
-			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&key_pins_pcduino3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@0 {
-			label = "Key Back";
-			linux,code = <KEY_BACK>;
-			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
-		};
-		button@1 {
-			label = "Key Home";
-			linux,code = <KEY_HOME>;
-			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
-		};
-		button@2 {
-			label = "Key Menu";
-			linux,code = <KEY_MENU>;
-			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
-	reg_ahci_5v: ahci-5v {
-		gpio = <&pio 7 2 0>;
-		status = "okay";
-	};
-};
diff --git a/src/arm/sun7i-a20.dtsi b/src/arm/sun7i-a20.dtsi
deleted file mode 100644
index 4011628c7381..000000000000
--- a/src/arm/sun7i-a20.dtsi
+++ /dev/null
@@ -1,988 +0,0 @@
-/*
- * Copyright 2013 Maxime Ripard
- *
- * Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		ethernet0 = &gmac;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial7 = &uart7;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
-		interrupts = <0 120 4>,
-			     <0 121 4>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-pll4-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		pll8: clk@01c20040 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-pll4-clk";
-			reg = <0x01c20040 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll8";
-		};
-
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
-		ahb_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb>;
-			clock-output-names = "ahb_usb0", "ahb_ehci0",
-				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
-				"ahb_nand", "ahb_sdram", "ahb_ace",
-				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
-				"ahb_spi2", "ahb_spi3", "ahb_sata",
-				"ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
-				"ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
-				"ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
-				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-				"ahb_de_fe1", "ahb_gmac", "ahb_mp",
-				"ahb_mali";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
-		};
-
-		apb0_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_spdif",
-				"apb0_ac97", "apb0_iis0", "apb0_iis1",
-				"apb0_pio", "apb0_ir0", "apb0_ir1",
-				"apb0_iis2", "apb0_keypad";
-		};
-
-		apb1_mux: apb1_mux@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1_mux";
-		};
-
-		apb1: apb1@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb1_mux>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_i2c0", "apb1_i2c1",
-				"apb1_i2c2", "apb1_i2c3", "apb1_can",
-				"apb1_scr", "apb1_ps20", "apb1_ps21",
-				"apb1_i2c4", "apb1_uart0", "apb1_uart1",
-				"apb1_uart2", "apb1_uart3", "apb1_uart4",
-				"apb1_uart5", "apb1_uart6", "apb1_uart7";
-		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		pata_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "pata";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		ir1_clk: clk@01c200b4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir1";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun4i-a10-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
-		};
-
-		spi3_clk: clk@01c200d4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200d4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi3";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
-
-		/*
-		 * The following two are dummy clocks, placeholders used in the gmac_tx
-		 * clock. The gmac driver will choose one parent depending on the PHY
-		 * interface mode, using clk_set_rate auto-reparenting.
-		 * The actual TX clock rate is not controlled by the gmac_tx clock.
-		 */
-		mii_phy_tx_clk: clk@2 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-			clock-output-names = "mii_phy_tx";
-		};
-
-		gmac_int_tx_clk: clk@3 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <125000000>;
-			clock-output-names = "gmac_int_tx";
-		};
-
-		gmac_tx_clk: clk@01c20164 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-gmac-clk";
-			reg = <0x01c20164 0x4>;
-			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
-			clock-output-names = "gmac_tx";
-		};
-
-		/*
-		 * Dummy clock used by output clocks
-		 */
-		osc24M_32k: clk@1 {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <750>;
-			clock-mult = <1>;
-			clocks = <&osc24M>;
-			clock-output-names = "osc24M_32k";
-		};
-
-		clk_out_a: clk@01c201f0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-out-clk";
-			reg = <0x01c201f0 0x4>;
-			clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
-			clock-output-names = "clk_out_a";
-		};
-
-		clk_out_b: clk@01c201f4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun7i-a20-out-clk";
-			reg = <0x01c201f4 0x4>;
-			clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
-			clock-output-names = "clk_out_b";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		nmi_intc: interrupt-controller@01c00030 {
-			compatible = "allwinner,sun7i-a20-sc-nmi";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x01c00030 0x0c>;
-			interrupts = <0 0 4>;
-		};
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <0 10 4>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <0 11 4>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-a10-emac";
-			reg = <0x01c0b000 0x1000>;
-			interrupts = <0 55 4>;
-			clocks = <&ahb_gates 17>;
-			status = "disabled";
-		};
-
-		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-a10-mdio";
-			reg = <0x01c0b080 0x14>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 32 4>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 33 4>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 34 4>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
-			interrupts = <0 35 4>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun7i-a20-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
-			reg-names = "phy_ctrl", "pmu1", "pmu2";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 1>, <&usb_clk 2>;
-			reset-names = "usb1_reset", "usb2_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <0 39 4>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <0 64 4>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <0 12 4>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		ahci: sata@01c18000 {
-			compatible = "allwinner,sun4i-a10-ahci";
-			reg = <0x01c18000 0x1000>;
-			interrupts = <0 56 4>;
-			clocks = <&pll6 0>, <&ahb_gates 25>;
-			status = "disabled";
-		};
-
-		ehci1: usb@01c1c000 {
-			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
-			reg = <0x01c1c000 0x100>;
-			interrupts = <0 40 4>;
-			clocks = <&ahb_gates 3>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci1: usb@01c1c400 {
-			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
-			reg = <0x01c1c400 0x100>;
-			interrupts = <0 65 4>;
-			clocks = <&usb_clk 7>, <&ahb_gates 4>;
-			phys = <&usbphy 2>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi3: spi@01c1f000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c1f000 0x1000>;
-			interrupts = <0 50 4>;
-			clocks = <&ahb_gates 23>, <&spi3_clk>;
-			clock-names = "ahb", "mod";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun7i-a20-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <0 28 4>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			pwm0_pins_a: pwm0@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			pwm1_pins_a: pwm1@0 {
-				allwinner,pins = "PI3";
-				allwinner,function = "pwm";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB22", "PB23";
-				allwinner,function = "uart0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart2_pins_a: uart2@0 {
-				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
-				allwinner,function = "uart2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart6_pins_a: uart6@0 {
-				allwinner,pins = "PI12", "PI13";
-				allwinner,function = "uart6";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			uart7_pins_a: uart7@0 {
-				allwinner,pins = "PI20", "PI21";
-				allwinner,function = "uart7";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB18", "PB19";
-				allwinner,function = "i2c1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB20", "PB21";
-				allwinner,function = "i2c2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			clk_out_a_pins_a: clk_out_a@0 {
-				allwinner,pins = "PI12";
-				allwinner,function = "clk_out_a";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			clk_out_b_pins_a: clk_out_b@0 {
-				allwinner,pins = "PI13";
-				allwinner,function = "clk_out_b";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_pins_mii_a: gmac_mii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "gmac";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			gmac_pins_rgmii_a: gmac_rgmii@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA10",
-						"PA11", "PA12", "PA13",
-						"PA15", "PA16";
-				allwinner,function = "gmac";
-				/*
-				 * data lines in RGMII mode use DDR mode
-				 * and need a higher signal drive strength
-				 */
-				allwinner,drive = <3>;
-				allwinner,pull = <0>;
-			};
-
-			spi1_pins_a: spi1@0 {
-				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
-				allwinner,function = "spi1";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			spi2_pins_a: spi2@0 {
-				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
-				allwinner,function = "spi2";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
-				allwinner,pins = "PH1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <0>;
-				allwinner,pull = <1>;
-			};
-
-			mmc3_pins_a: mmc3@0 {
-				allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
-				allwinner,function = "mmc3";
-				allwinner,drive = <2>;
-				allwinner,pull = <0>;
-			};
-
-			ir0_pins_a: ir0@0 {
-				    allwinner,pins = "PB3","PB4";
-				    allwinner,function = "ir0";
-				    allwinner,drive = <0>;
-				    allwinner,pull = <0>;
-			};
-
-			ir1_pins_a: ir1@0 {
-				    allwinner,pins = "PB22","PB23";
-				    allwinner,function = "ir1";
-				    allwinner,drive = <0>;
-				    allwinner,pull = <0>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <0 22 4>,
-				     <0 23 4>,
-				     <0 24 4>,
-				     <0 25 4>,
-				     <0 67 4>,
-				     <0 68 4>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		rtc: rtc@01c20d00 {
-			compatible = "allwinner,sun7i-a20-rtc";
-			reg = <0x01c20d00 0x20>;
-			interrupts = <0 24 4>;
-		};
-
-		pwm: pwm@01c20e00 {
-			compatible = "allwinner,sun7i-a20-pwm";
-			reg = <0x01c20e00 0xc>;
-			clocks = <&osc24M>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		ir0: ir@01c21800 {
-			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 6>, <&ir0_clk>;
-			clock-names = "apb", "ir";
-			interrupts = <0 5 4>;
-			reg = <0x01c21800 0x40>;
-			status = "disabled";
-		};
-
-		ir1: ir@01c21c00 {
-			compatible = "allwinner,sun4i-a10-ir";
-			clocks = <&apb0_gates 7>, <&ir1_clk>;
-			clock-names = "apb", "ir";
-			interrupts = <0 6 4>;
-			reg = <0x01c21c00 0x40>;
-			status = "disabled";
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun7i-a20-sid";
-			reg = <0x01c23800 0x200>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <0 29 4>;
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <0 1 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 16>;
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <0 2 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <0 3 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 18>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <0 4 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
-
-		uart4: serial@01c29000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29000 0x400>;
-			interrupts = <0 17 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 20>;
-			status = "disabled";
-		};
-
-		uart5: serial@01c29400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29400 0x400>;
-			interrupts = <0 18 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 21>;
-			status = "disabled";
-		};
-
-		uart6: serial@01c29800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29800 0x400>;
-			interrupts = <0 19 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 22>;
-			status = "disabled";
-		};
-
-		uart7: serial@01c29c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29c00 0x400>;
-			interrupts = <0 20 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 23>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <0 7 4>;
-			clocks = <&apb1_gates 0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <0 8 4>;
-			clocks = <&apb1_gates 1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <0 9 4>;
-			clocks = <&apb1_gates 2>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c3: i2c@01c2b800 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b800 0x400>;
-			interrupts = <0 88 4>;
-			clocks = <&apb1_gates 3>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c4: i2c@01c2c000 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2c000 0x400>;
-			interrupts = <0 89 4>;
-			clocks = <&apb1_gates 15>;
-			clock-frequency = <100000>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		gmac: ethernet@01c50000 {
-			compatible = "allwinner,sun7i-a20-gmac";
-			reg = <0x01c50000 0x10000>;
-			interrupts = <0 85 4>;
-			interrupt-names = "macirq";
-			clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
-			clock-names = "stmmaceth", "allwinner_gmac_tx";
-			snps,pbl = <2>;
-			snps,fixed-burst;
-			snps,force_sf_dma_mode;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		hstimer@01c60000 {
-			compatible = "allwinner,sun7i-a20-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <0 81 4>,
-				     <0 82 4>,
-				     <0 83 4>,
-				     <0 84 4>;
-			clocks = <&ahb_gates 28>;
-		};
-
-		gic: interrupt-controller@01c81000 {
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <1 9 0xf04>;
-		};
-	};
-};
diff --git a/src/arm/sun8i-a23-ippo-q8h-v5.dts b/src/arm/sun8i-a23-ippo-q8h-v5.dts
deleted file mode 100644
index 34002e3eba9d..000000000000
--- a/src/arm/sun8i-a23-ippo-q8h-v5.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright 2014 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun8i-a23.dtsi"
-
-/ {
-	model = "Ippo Q8H Dual Core Tablet (v5)";
-	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
-
-	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
-	};
-
-	soc@01c00000 {
-		r_uart: serial@01f02800 {
-			status = "okay";
-		};
-	};
-};
diff --git a/src/arm/sun8i-a23.dtsi b/src/arm/sun8i-a23.dtsi
deleted file mode 100644
index 54ac0787216a..000000000000
--- a/src/arm/sun8i-a23.dtsi
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * Copyright 2014 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &r_uart;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc24M: osc24M_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: osc32k_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		/* dummy clock until actually implemented */
-		pll6: pll6_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <600000000>;
-			clock-output-names = "pll6";
-		};
-
-		cpu: cpu_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1_mux: ahb1_mux_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
-			clock-output-names = "ahb1_mux";
-		};
-
-		ahb1: ahb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1_mux>;
-			clock-output-names = "ahb1";
-		};
-
-		apb1: apb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-					"ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_spinlock",
-					"ahb1_drc";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_codec", "apb1_pio",
-					"apb1_daudio0",	"apb1_daudio1";
-		};
-
-		apb2_mux: apb2_mux_clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-mux-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
-			clock-output-names = "apb2_mux";
-		};
-
-		apb2: apb2_clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-apb2-div-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&apb2_mux>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2",
-					"apb2_uart3", "apb2_uart4";
-		};
-	};
-
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0xa0>;
-			interrupts = <0 18 4>,
-				     <0 19 4>;
-			clocks = <&osc24M>;
-		};
-
-		wdt0: watchdog@01c20ca0 {
-			compatible = "allwinner,sun6i-a31-wdt";
-			reg = <0x01c20ca0 0x20>;
-			interrupts = <0 25 4>;
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <0 0 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <0 1 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <0 2 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <0 3 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
-			status = "disabled";
-		};
-
-		uart4: serial@01c29000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29000 0x400>;
-			interrupts = <0 4 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
-			status = "disabled";
-		};
-
-		gic: interrupt-controller@01c81000 {
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		prcm@01f01400 {
-			compatible = "allwinner,sun8i-a23-prcm";
-			reg = <0x01f01400 0x200>;
-
-			ar100: ar100_clk {
-				compatible = "fixed-factor-clock";
-				#clock-cells = <0>;
-				clock-div = <1>;
-				clock-mult = <1>;
-				clocks = <&osc24M>;
-				clock-output-names = "ar100";
-			};
-
-			ahb0: ahb0_clk {
-				compatible = "fixed-factor-clock";
-				#clock-cells = <0>;
-				clock-div = <1>;
-				clock-mult = <1>;
-				clocks = <&ar100>;
-				clock-output-names = "ahb0";
-			};
-
-			apb0: apb0_clk {
-				compatible = "allwinner,sun8i-a23-apb0-clk";
-				#clock-cells = <0>;
-				clocks = <&ahb0>;
-				clock-output-names = "apb0";
-			};
-
-			apb0_gates: apb0_gates_clk {
-				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
-				#clock-cells = <1>;
-				clocks = <&apb0>;
-				clock-output-names = "apb0_pio", "apb0_timer",
-						"apb0_rsb", "apb0_uart",
-						"apb0_i2c";
-			};
-
-			apb0_rst: apb0_rst {
-				compatible = "allwinner,sun6i-a31-clock-reset";
-				#reset-cells = <1>;
-			};
-		};
-
-		r_uart: serial@01f02800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01f02800 0x400>;
-			interrupts = <0 38 4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb0_gates 4>;
-			resets = <&apb0_rst 4>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/src/arm/sunxi-common-regulators.dtsi b/src/arm/sunxi-common-regulators.dtsi
deleted file mode 100644
index 3d021efd1a38..000000000000
--- a/src/arm/sunxi-common-regulators.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * sunxi boards common regulator (ahci target power supply, usb-vbus) code
- *
- * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/ {
-	soc@01c00000 {
-		pio: pinctrl@01c20800 {
-			ahci_pwr_pin_a: ahci_pwr_pin@0 {
-				allwinner,pins = "PB8";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			usb1_vbus_pin_a: usb1_vbus_pin@0 {
-				allwinner,pins = "PH6";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-
-			usb2_vbus_pin_a: usb2_vbus_pin@0 {
-				allwinner,pins = "PH3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <0>;
-				allwinner,pull = <0>;
-			};
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ahci_pwr_pin_a>;
-		regulator-name = "ahci-5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&pio 1 8 0>;
-		status = "disabled";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb1_vbus_pin_a>;
-		regulator-name = "usb1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&pio 7 6 0>;
-		status = "disabled";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_pin_a>;
-		regulator-name = "usb2-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = <&pio 7 3 0>;
-		status = "disabled";
-	};
-
-	reg_vcc3v0: vcc3v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v0";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
diff --git a/src/arm/tegra114-dalmore.dts b/src/arm/tegra114-dalmore.dts
deleted file mode 100644
index 5c21d216515a..000000000000
--- a/src/arm/tegra114-dalmore.dts
+++ /dev/null
@@ -1,1286 +0,0 @@
-/*
- * This dts file supports Dalmore A04.
- * Other board revisions are not supported
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra114.dtsi"
-
-/ {
-	model = "NVIDIA Tegra114 Dalmore evaluation board";
-	compatible = "nvidia,dalmore", "nvidia,tegra114";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps65913@58";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-
-			hdmi-supply = <&vdd_5v0_hdmi>;
-			vdd-supply = <&vdd_hdmi_reg>;
-			pll-supply = <&palmas_smps3_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-		};
-
-		dsi@54300000 {
-			status = "okay";
-
-			avdd-dsi-csi-supply = <&avdd_1v2_reg>;
-
-			panel@0 {
-				compatible = "panasonic,vvx10f004b00",
-					     "simple-panel";
-				reg = <0>;
-
-				power-supply = <&avdd_lcd_reg>;
-				backlight = <&backlight>;
-			};
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			clk1_out_pw4 {
-				nvidia,pins = "clk1_out_pw4";
-				nvidia,function = "extperiph1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap1_din_pn1 {
-				nvidia,pins = "dap1_din_pn1";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap1_dout_pn2 {
-				nvidia,pins = "dap1_dout_pn2",
-						"dap1_fs_pn0",
-						"dap1_sclk_pn3";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_din_pa4 {
-				nvidia,pins = "dap2_din_pa4";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_dout_pa5 {
-				nvidia,pins = "dap2_dout_pa5",
-						"dap2_fs_pa2",
-						"dap2_sclk_pa3";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_din_pp5 {
-				nvidia,pins = "dap4_din_pp5",
-						"dap4_dout_pp6",
-						"dap4_fs_pp4",
-						"dap4_sclk_pp7";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dvfs_pwm_px0 {
-				nvidia,pins = "dvfs_pwm_px0",
-						"dvfs_clk_px2";
-				nvidia,function = "cldvfs";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_clk_py0 {
-				nvidia,pins = "ulpi_clk_py0",
-						"ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_dir_py1 {
-				nvidia,pins = "ulpi_dir_py1",
-						"ulpi_nxt_py2";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_stp_py3 {
-				nvidia,pins = "ulpi_stp_py3";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cam_i2c_scl_pbb1 {
-				nvidia,pins = "cam_i2c_scl_pbb1",
-						"cam_i2c_sda_pbb2";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			cam_mclk_pcc0 {
-				nvidia,pins = "cam_mclk_pcc0",
-						"pbb0";
-				nvidia,function = "vi_alt3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			gen2_i2c_scl_pt5 {
-				nvidia,pins = "gen2_i2c_scl_pt5",
-						"gen2_i2c_sda_pt6";
-				nvidia,function = "i2c2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_a16_pj7 {
-				nvidia,pins = "gmi_a16_pj7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_a17_pb0 {
-				nvidia,pins = "gmi_a17_pb0",
-						"gmi_a18_pb1";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_a19_pk7 {
-				nvidia,pins = "gmi_a19_pk7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad5_pg5 {
-				nvidia,pins = "gmi_ad5_pg5",
-						"gmi_cs6_n_pi3",
-						"gmi_wr_n_pi0";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad6_pg6 {
-				nvidia,pins = "gmi_ad6_pg6",
-						"gmi_ad7_pg7";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad12_ph4 {
-				nvidia,pins = "gmi_ad12_ph4";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad9_ph1 {
-				nvidia,pins = "gmi_ad9_ph1";
-				nvidia,function = "pwm1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_cs1_n_pj2 {
-				nvidia,pins = "gmi_cs1_n_pj2",
-						"gmi_oe_n_pi1";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk2_out_pw5 {
-				nvidia,pins = "clk2_out_pw5";
-				nvidia,function = "extperiph2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins = "sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_wp_n_pv3 {
-				nvidia,pins = "sdmmc1_wp_n_pv3";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins = "sdmmc3_cmd_pa7",
-						"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4",
-						"kb_col4_pq4",
-						"sdmmc3_clk_lb_out_pee4",
-						"sdmmc3_clk_lb_in_pee5";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_cmd_pt7 {
-				nvidia,pins = "sdmmc4_cmd_pt7",
-						"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk_32k_out_pa0 {
-				nvidia,pins = "clk_32k_out_pa0";
-				nvidia,function = "blink";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col0_pq0 {
-				nvidia,pins = "kb_col0_pq0",
-						"kb_col1_pq1",
-						"kb_col2_pq2",
-						"kb_row0_pr0",
-						"kb_row1_pr1",
-						"kb_row2_pr2";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap3_din_pp1 {
-				nvidia,pins = "dap3_din_pp1",
-						"dap3_sclk_pp3";
-				nvidia,function = "displayb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pv0 {
-				nvidia,pins = "pv0";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row7_pr7 {
-				nvidia,pins = "kb_row7_pr7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row10_ps2 {
-				nvidia,pins = "kb_row10_ps2";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row9_ps1 {
-				nvidia,pins = "kb_row9_ps1";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_i2c_scl_pz6 {
-				nvidia,pins = "pwr_i2c_scl_pz6",
-						"pwr_i2c_sda_pz7";
-				nvidia,function = "i2cpwr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			sys_clk_req_pz5 {
-				nvidia,pins = "sys_clk_req_pz5";
-				nvidia,function = "sysclk";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			core_pwr_req {
-				nvidia,pins = "core_pwr_req";
-				nvidia,function = "pwron";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cpu_pwr_req {
-				nvidia,pins = "cpu_pwr_req";
-				nvidia,function = "cpu";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_int_n {
-				nvidia,pins = "pwr_int_n";
-				nvidia,function = "pmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			reset_out_n {
-				nvidia,pins = "reset_out_n";
-				nvidia,function = "reset_out_n";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk3_out_pee0 {
-				nvidia,pins = "clk3_out_pee0";
-				nvidia,function = "extperiph3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gen1_i2c_scl_pc4 {
-				nvidia,pins = "gen1_i2c_scl_pc4",
-						"gen1_i2c_sda_pc5";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_cts_n_pj5 {
-				nvidia,pins = "uart2_cts_n_pj5";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_rts_n_pj6 {
-				nvidia,pins = "uart2_rts_n_pj6";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_rxd_pc3 {
-				nvidia,pins = "uart2_rxd_pc3";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_txd_pc2 {
-				nvidia,pins = "uart2_txd_pc2";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_cts_n_pa1 {
-				nvidia,pins = "uart3_cts_n_pa1",
-						"uart3_rxd_pw7";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart3_rts_n_pc0 {
-				nvidia,pins = "uart3_rts_n_pc0",
-						"uart3_txd_pw6";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			owr {
-				nvidia,pins = "owr";
-				nvidia,function = "owr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			hdmi_cec_pee3 {
-				nvidia,pins = "hdmi_cec_pee3";
-				nvidia,function = "cec";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			ddc_scl_pv4 {
-				nvidia,pins = "ddc_scl_pv4",
-						"ddc_sda_pv5";
-				nvidia,function = "i2c4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
-			};
-			spdif_in_pk6 {
-				nvidia,pins = "spdif_in_pk6";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			usb_vbus_en0_pn4 {
-				nvidia,pins = "usb_vbus_en0_pn4";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x6_aud_px6 {
-				nvidia,pins = "gpio_x6_aud_px6";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x4_aud_px4 {
-				nvidia,pins = "gpio_x4_aud_px4",
-						"gpio_x7_aud_px7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_x5_aud_px5 {
-				nvidia,pins = "gpio_x5_aud_px5";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_w2_aud_pw2 {
-				nvidia,pins = "gpio_w2_aud_pw2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_w3_aud_pw3 {
-				nvidia,pins = "gpio_w3_aud_pw3";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x1_aud_px1 {
-				nvidia,pins = "gpio_x1_aud_px1";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x3_aud_px3 {
-				nvidia,pins = "gpio_x3_aud_px3";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap3_fs_pp0 {
-				nvidia,pins = "dap3_fs_pp0";
-				nvidia,function = "i2s2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap3_dout_pp2 {
-				nvidia,pins = "dap3_dout_pp2";
-				nvidia,function = "i2s2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pv1 {
-				nvidia,pins = "pv1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pbb3 {
-				nvidia,pins = "pbb3",
-						"pbb5",
-						"pbb6",
-						"pbb7";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pcc1 {
-				nvidia,pins = "pcc1",
-						"pcc2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad0_pg0 {
-				nvidia,pins = "gmi_ad0_pg0",
-						"gmi_ad1_pg1";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad10_ph2 {
-				nvidia,pins = "gmi_ad10_ph2",
-						"gmi_ad11_ph3",
-						"gmi_ad13_ph5",
-						"gmi_ad8_ph0",
-						"gmi_clk_pk1";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad2_pg2 {
-				nvidia,pins = "gmi_ad2_pg2",
-						"gmi_ad3_pg3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_adv_n_pk0 {
-				nvidia,pins = "gmi_adv_n_pk0",
-						"gmi_cs0_n_pj0",
-						"gmi_cs2_n_pk3",
-						"gmi_cs4_n_pk2",
-						"gmi_cs7_n_pi6",
-						"gmi_dqs_p_pj3",
-						"gmi_iordy_pi5",
-						"gmi_wp_n_pc7";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_cs3_n_pk4 {
-				nvidia,pins = "gmi_cs3_n_pk4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk2_req_pcc5 {
-				nvidia,pins = "clk2_req_pcc5";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col3_pq3 {
-				nvidia,pins = "kb_col3_pq3",
-						"kb_col6_pq6",
-						"kb_col7_pq7";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col5_pq5 {
-				nvidia,pins = "kb_col5_pq5";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row3_pr3 {
-				nvidia,pins = "kb_row3_pr3",
-						"kb_row4_pr4",
-						"kb_row6_pr6",
-						"kb_row8_ps0";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk3_req_pee1 {
-				nvidia,pins = "clk3_req_pee1";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu4 {
-				nvidia,pins = "pu4";
-				nvidia,function = "displayb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu5 {
-				nvidia,pins = "pu5",
-						"pu6";
-				nvidia,function = "displayb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			hdmi_int_pn7 {
-				nvidia,pins = "hdmi_int_pn7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk1_req_pee2 {
-				nvidia,pins = "clk1_req_pee2",
-						"usb_vbus_en1_pn5";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <36>;
-				nvidia,pull-up-strength = <20>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
-			};
-			drive_sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <22>;
-				nvidia,pull-up-strength = <36>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-			drive_gma {
-				nvidia,pins = "drive_gma";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <2>;
-				nvidia,pull-up-strength = <1>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-		};
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		battery: smart-battery@b {
-			compatible = "ti,bq20z45", "sbs,sbs-battery";
-			reg = <0xb>;
-			battery-name = "battery";
-			sbs,i2c-retry-count = <2>;
-			sbs,poll-retry-count = <100>;
-			power-supplies = <&charger>;
-		};
-
-		rt5640: rt5640@1c {
-			compatible = "realtek,rt5640";
-			reg = <0x1c>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
-			realtek,ldo1-en-gpios =
-				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
-		};
-
-		temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-			vcc-supply = <&palmas_ldo6_reg>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
-
-	hdmi_ddc: i2c@7000c700 {
-		status = "okay";
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		tps51632@43 {
-			compatible = "ti,tps51632";
-			reg = <0x43>;
-			regulator-name = "vdd-cpu";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1520000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		tps65090@48 {
-			compatible = "ti,tps65090";
-			reg = <0x48>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_LEVEL_HIGH>;
-
-			vsys1-supply = <&vdd_ac_bat_reg>;
-			vsys2-supply = <&vdd_ac_bat_reg>;
-			vsys3-supply = <&vdd_ac_bat_reg>;
-			infet1-supply = <&vdd_ac_bat_reg>;
-			infet2-supply = <&vdd_ac_bat_reg>;
-			infet3-supply = <&tps65090_dcdc2_reg>;
-			infet4-supply = <&tps65090_dcdc2_reg>;
-			infet5-supply = <&tps65090_dcdc2_reg>;
-			infet6-supply = <&tps65090_dcdc2_reg>;
-			infet7-supply = <&tps65090_dcdc2_reg>;
-			vsys-l1-supply = <&vdd_ac_bat_reg>;
-			vsys-l2-supply = <&vdd_ac_bat_reg>;
-
-			charger: charger {
-				compatible = "ti,tps65090-charger";
-				ti,enable-low-current-chrg;
-			};
-
-			regulators {
-				tps65090_dcdc1_reg: dcdc1 {
-					regulator-name = "vdd-sys-5v0";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				tps65090_dcdc2_reg: dcdc2 {
-					regulator-name = "vdd-sys-3v3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				tps65090_dcdc3_reg: dcdc3 {
-					regulator-name = "vdd-ao";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_bl_reg: fet1 {
-					regulator-name = "vdd-lcd-bl";
-				};
-
-				fet3 {
-					regulator-name = "vdd-modem-3v3";
-				};
-
-				avdd_lcd_reg: fet4 {
-					regulator-name = "avdd-lcd";
-				};
-
-				fet5 {
-					regulator-name = "vdd-lvds";
-				};
-
-				fet6 {
-					regulator-name = "vdd-sd-slot";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				fet7 {
-					regulator-name = "vdd-com-3v3";
-				};
-
-				ldo1 {
-					regulator-name = "vdd-sby-5v0";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo2 {
-					regulator-name = "vdd-sby-3v3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-
-		palmas: tps65913@58 {
-			compatible = "ti,palmas";
-			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			palmas_gpio: gpio {
-				compatible = "ti,palmas-gpio";
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			pmic {
-				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
-				smps1-in-supply = <&tps65090_dcdc3_reg>;
-				smps3-in-supply = <&tps65090_dcdc3_reg>;
-				smps4-in-supply = <&tps65090_dcdc2_reg>;
-				smps7-in-supply = <&tps65090_dcdc2_reg>;
-				smps8-in-supply = <&tps65090_dcdc2_reg>;
-				smps9-in-supply = <&tps65090_dcdc2_reg>;
-				ldo1-in-supply = <&tps65090_dcdc2_reg>;
-				ldo2-in-supply = <&tps65090_dcdc2_reg>;
-				ldo3-in-supply = <&palmas_smps3_reg>;
-				ldo4-in-supply = <&tps65090_dcdc2_reg>;
-				ldo5-in-supply = <&vdd_ac_bat_reg>;
-				ldo6-in-supply = <&tps65090_dcdc2_reg>;
-				ldo7-in-supply = <&tps65090_dcdc2_reg>;
-				ldo8-in-supply = <&tps65090_dcdc3_reg>;
-				ldo9-in-supply = <&palmas_smps9_reg>;
-				ldoln-in-supply = <&tps65090_dcdc1_reg>;
-				ldousb-in-supply = <&tps65090_dcdc1_reg>;
-
-				regulators {
-					smps12 {
-						regulator-name = "vddio-ddr";
-						regulator-min-microvolt = <1350000>;
-						regulator-max-microvolt = <1350000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					palmas_smps3_reg: smps3 {
-						regulator-name = "vddio-1v8";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps45 {
-						regulator-name = "vdd-core";
-						regulator-min-microvolt = <900000>;
-						regulator-max-microvolt = <1400000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps457 {
-						regulator-name = "vdd-core";
-						regulator-min-microvolt = <900000>;
-						regulator-max-microvolt = <1400000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps8 {
-						regulator-name = "avdd-pll";
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					palmas_smps9_reg: smps9 {
-						regulator-name = "sdhci-vdd-sd-slot";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-						regulator-always-on;
-					};
-
-					ldo1 {
-						regulator-name = "avdd-cam1";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					ldo2 {
-						regulator-name = "avdd-cam2";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					avdd_1v2_reg: ldo3 {
-						regulator-name = "avdd-dsi-csi";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					ldo4 {
-						regulator-name = "vpp-fuse";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					palmas_ldo6_reg: ldo6 {
-						regulator-name = "vdd-sensor-2v85";
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					ldo7 {
-						regulator-name = "vdd-af-cam1";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					ldo8 {
-						regulator-name = "vdd-rtc";
-						regulator-min-microvolt = <900000>;
-						regulator-max-microvolt = <900000>;
-						regulator-always-on;
-						regulator-boot-on;
-						ti,enable-ldo8-tracking;
-					};
-
-					ldo9 {
-						regulator-name = "vddio-sdmmc-2";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldoln {
-						regulator-name = "hvdd-usb";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					ldousb {
-						regulator-name = "avdd-usb";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					regen1 {
-						regulator-name = "rail-3v3";
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					regen2 {
-						regulator-name = "rail-5v0";
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-				};
-			};
-
-			rtc {
-				compatible = "ti,palmas-rtc";
-				interrupt-parent = <&palmas>;
-				interrupts = <8 0>;
-			};
-
-			pinmux {
-				compatible = "ti,tps65913-pinctrl";
-				pinctrl-names = "default";
-				pinctrl-0 = <&palmas_default>;
-
-				palmas_default: pinmux {
-					pin_gpio6 {
-						pins = "gpio6";
-						function = "gpio";
-					};
-				};
-			};
-		};
-	};
-
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spi-flash@0 {
-			compatible = "winbond,w25q32dw";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <500>;
-		nvidia,cpu-pwr-off-time = <300>;
-		nvidia,core-pwr-good-time = <641 3845>;
-		nvidia,core-pwr-off-time = <61036>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	ahub@70080000 {
-		i2s@70080400 {
-			status = "okay";
-		};
-	};
-
-	sdhci@78000400 {
-		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		status = "okay";
-	};
-
-	sdhci@78000600 {
-		bus-width = <8>;
-		status = "okay";
-		non-removable;
-	};
-
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		vbus-supply = <&usb3_vbus_reg>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_bl_reg>;
-		pwms = <&pwm 1 1000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		home {
-			label = "Home";
-			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-
-		volume_down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		volume_up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_ac_bat_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_ac_bat";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		dvdd_ts_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "dvdd_ts";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
-		};
-
-		usb1_vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
-
-		usb3_vbus_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
-
-		vdd_hdmi_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_hdmi_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
-
-		vdd_cam_1v8_reg: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "vdd_cam_1v8_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&palmas_gpio 6 0>;
-		};
-
-		vdd_5v0_hdmi: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "VDD_5V0_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-rt5640-dalmore",
-			     "nvidia,tegra-audio-rt5640";
-		nvidia,model = "NVIDIA Tegra Dalmore";
-
-		nvidia,audio-routing =
-			"Headphones", "HPOR",
-			"Headphones", "HPOL",
-			"Speakers", "SPORP",
-			"Speakers", "SPORN",
-			"Speakers", "SPOLP",
-			"Speakers", "SPOLN",
-			"Mic Jack", "MICBIAS1",
-			"IN2P", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&rt5640>;
-
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
-			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA114_CLK_EXTERN1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra114-roth.dts b/src/arm/tegra114-roth.dts
deleted file mode 100644
index c7c6825f11fb..000000000000
--- a/src/arm/tegra114-roth.dts
+++ /dev/null
@@ -1,1125 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra114.dtsi"
-
-/ {
-	model = "NVIDIA SHIELD";
-	compatible = "nvidia,roth", "nvidia,tegra114";
-
-	chosen {
-		/* SHIELD's bootloader's arguments need to be overridden */
-		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1";
-		/* SHIELD's bootloader will place initrd at this address */
-		linux,initrd-start = <0x82000000>;
-		linux,initrd-end = <0x82800000>;
-	};
-
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <2>;
-			tlm,version-minor = <8>;
-		};
-	};
-
-	memory {
-		/* memory >= 0x79600000 is reserved for firmware usage */
-		reg = <0x80000000 0x79600000>;
-	};
-
-	host1x@50000000 {
-		dsi@54300000 {
-			status = "okay";
-
-			vdd-supply = <&vdd_1v2_ap>;
-
-			panel@0 {
-				compatible = "lg,lh500wx1-sd03";
-				reg = <0>;
-
-				power-supply = <&vdd_lcd>;
-				backlight = <&backlight>;
-			};
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			clk1_out_pw4 {
-				nvidia,pins = "clk1_out_pw4";
-				nvidia,function = "extperiph1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap1_din_pn1 {
-				nvidia,pins = "dap1_din_pn1";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap1_dout_pn2 {
-				nvidia,pins = "dap1_dout_pn2",
-						"dap1_fs_pn0",
-						"dap1_sclk_pn3";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_din_pa4 {
-				nvidia,pins = "dap2_din_pa4";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_dout_pa5 {
-				nvidia,pins = "dap2_dout_pa5",
-						"dap2_fs_pa2",
-						"dap2_sclk_pa3";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_din_pp5 {
-				nvidia,pins = "dap4_din_pp5",
-						"dap4_dout_pp6",
-						"dap4_fs_pp4",
-						"dap4_sclk_pp7";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dvfs_pwm_px0 {
-				nvidia,pins = "dvfs_pwm_px0",
-						"dvfs_clk_px2";
-				nvidia,function = "cldvfs";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_clk_py0 {
-				nvidia,pins = "ulpi_clk_py0",
-						"ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_dir_py1 {
-				nvidia,pins = "ulpi_dir_py1",
-						"ulpi_nxt_py2";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_stp_py3 {
-				nvidia,pins = "ulpi_stp_py3";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cam_i2c_scl_pbb1 {
-				nvidia,pins = "cam_i2c_scl_pbb1",
-						"cam_i2c_sda_pbb2";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			cam_mclk_pcc0 {
-				nvidia,pins = "cam_mclk_pcc0",
-						"pbb0";
-				nvidia,function = "vi_alt3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			pbb4 {
-				nvidia,pins = "pbb4";
-				nvidia,function = "vgp4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			gen2_i2c_scl_pt5 {
-				nvidia,pins = "gen2_i2c_scl_pt5",
-						"gen2_i2c_sda_pt6";
-				nvidia,function = "i2c2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_a16_pj7 {
-				nvidia,pins = "gmi_a16_pj7",
-						"gmi_a19_pk7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_a17_pb0 {
-				nvidia,pins = "gmi_a17_pb0",
-						"gmi_a18_pb1";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad5_pg5 {
-				nvidia,pins = "gmi_ad5_pg5",
-						"gmi_wr_n_pi0";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad6_pg6 {
-				nvidia,pins = "gmi_ad6_pg6",
-						"gmi_ad7_pg7";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad12_ph4 {
-				nvidia,pins = "gmi_ad12_ph4";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_cs6_n_pi13 {
-				nvidia,pins = "gmi_cs6_n_pi3";
-				nvidia,function = "nand";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad9_ph1 {
-				nvidia,pins = "gmi_ad9_ph1";
-				nvidia,function = "pwm1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_cs1_n_pj2 {
-				nvidia,pins = "gmi_cs1_n_pj2",
-						"gmi_oe_n_pi1";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_rst_n_pi4 {
-				nvidia,pins = "gmi_rst_n_pi4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_iordy_pi5 {
-				nvidia,pins = "gmi_iordy_pi5";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk2_out_pw5 {
-				nvidia,pins = "clk2_out_pw5";
-				nvidia,function = "extperiph2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins = "sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins = "sdmmc3_cmd_pa7",
-						"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4",
-						"sdmmc3_cd_n_pv2",
-						"sdmmc3_clk_lb_out_pee4",
-						"sdmmc3_clk_lb_in_pee5";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col4_pq4 {
-				nvidia,pins = "kb_col4_pq4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_cmd_pt7 {
-				nvidia,pins = "sdmmc4_cmd_pt7",
-						"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk_32k_out_pa0 {
-				nvidia,pins = "clk_32k_out_pa0";
-				nvidia,function = "blink";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col0_pq0 {
-				nvidia,pins = "kb_col0_pq0",
-						"kb_col1_pq1",
-						"kb_col2_pq2",
-						"kb_row0_pr0",
-						"kb_row1_pr1",
-						"kb_row2_pr2",
-						"kb_row8_ps0";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row7_pr7 {
-				nvidia,pins = "kb_row7_pr7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row10_ps2 {
-				nvidia,pins = "kb_row10_ps2";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row9_ps1 {
-				nvidia,pins = "kb_row9_ps1";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_i2c_scl_pz6 {
-				nvidia,pins = "pwr_i2c_scl_pz6",
-						"pwr_i2c_sda_pz7";
-				nvidia,function = "i2cpwr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			sys_clk_req_pz5 {
-				nvidia,pins = "sys_clk_req_pz5";
-				nvidia,function = "sysclk";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			core_pwr_req {
-				nvidia,pins = "core_pwr_req";
-				nvidia,function = "pwron";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cpu_pwr_req {
-				nvidia,pins = "cpu_pwr_req";
-				nvidia,function = "cpu";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_int_n {
-				nvidia,pins = "pwr_int_n";
-				nvidia,function = "pmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			reset_out_n {
-				nvidia,pins = "reset_out_n";
-				nvidia,function = "reset_out_n";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk3_out_pee0 {
-				nvidia,pins = "clk3_out_pee0";
-				nvidia,function = "extperiph3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gen1_i2c_scl_pc4 {
-				nvidia,pins = "gen1_i2c_scl_pc4",
-						"gen1_i2c_sda_pc5";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_cts_n_pj5 {
-				nvidia,pins = "uart2_cts_n_pj5";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_rts_n_pj6 {
-				nvidia,pins = "uart2_rts_n_pj6";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_rxd_pc3 {
-				nvidia,pins = "uart2_rxd_pc3";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_txd_pc2 {
-				nvidia,pins = "uart2_txd_pc2";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_cts_n_pa1 {
-				nvidia,pins = "uart3_cts_n_pa1",
-						"uart3_rxd_pw7";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart3_rts_n_pc0 {
-				nvidia,pins = "uart3_rts_n_pc0",
-						"uart3_txd_pw6";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			owr {
-				nvidia,pins = "owr";
-				nvidia,function = "owr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			hdmi_cec_pee3 {
-				nvidia,pins = "hdmi_cec_pee3";
-				nvidia,function = "cec";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			ddc_scl_pv4 {
-				nvidia,pins = "ddc_scl_pv4",
-						"ddc_sda_pv5";
-				nvidia,function = "i2c4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
-			};
-			spdif_in_pk6 {
-				nvidia,pins = "spdif_in_pk6";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			usb_vbus_en0_pn4 {
-				nvidia,pins = "usb_vbus_en0_pn4";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x6_aud_px6 {
-				nvidia,pins = "gpio_x6_aud_px6";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x1_aud_px1 {
-				nvidia,pins = "gpio_x1_aud_px1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x7_aud_px7 {
-				nvidia,pins = "gpio_x7_aud_px7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_adv_n_pk0 {
-				nvidia,pins = "gmi_adv_n_pk0";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_cs0_n_pj0 {
-				nvidia,pins = "gmi_cs0_n_pj0";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pu3 {
-				nvidia,pins = "pu3";
-				nvidia,function = "pwm0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_x4_aud_px4 {
-				nvidia,pins = "gpio_x4_aud_px4",
-						"gpio_x5_aud_px5";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x3_aud_px3 {
-				nvidia,pins = "gpio_x3_aud_px3";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_w2_aud_pw2 {
-				nvidia,pins = "gpio_w2_aud_pw2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_w3_aud_pw3 {
-				nvidia,pins = "gpio_w3_aud_pw3";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap3_fs_pp0 {
-				nvidia,pins = "dap3_fs_pp0",
-						"dap3_din_pp1",
-						"dap3_dout_pp2",
-						"dap3_sclk_pp3";
-				nvidia,function = "i2s2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pv0 {
-				nvidia,pins = "pv0";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pv1 {
-				nvidia,pins = "pv1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pbb3 {
-				nvidia,pins = "pbb3",
-						"pbb5",
-						"pbb6",
-						"pbb7";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pcc1 {
-				nvidia,pins = "pcc1",
-						"pcc2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad0_pg0 {
-				nvidia,pins = "gmi_ad0_pg0",
-						"gmi_ad1_pg1";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad10_ph2 {
-				nvidia,pins = "gmi_ad10_ph2",
-						"gmi_ad12_ph4",
-						"gmi_ad15_ph7",
-						"gmi_cs3_n_pk4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad11_ph3 {
-				nvidia,pins = "gmi_ad11_ph3",
-						"gmi_ad13_ph5",
-						"gmi_ad8_ph0",
-						"gmi_clk_pk1",
-						"gmi_cs2_n_pk3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gmi_ad14_ph6 {
-				nvidia,pins = "gmi_ad14_ph6",
-						"gmi_cs0_n_pj0",
-						"gmi_cs4_n_pk2",
-						"gmi_cs7_n_pi6",
-						"gmi_dqs_p_pj3",
-						"gmi_wp_n_pc7";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gmi_ad2_pg2 {
-				nvidia,pins = "gmi_ad2_pg2",
-						"gmi_ad3_pg3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_wp_n_pv3 {
-				nvidia,pins = "sdmmc1_wp_n_pv3";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk2_req_pcc5 {
-				nvidia,pins = "clk2_req_pcc5";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col3_pq3 {
-				nvidia,pins = "kb_col3_pq3";
-				nvidia,function = "pwm2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col5_pq5 {
-				nvidia,pins = "kb_col5_pq5";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col6_pq6 {
-				nvidia,pins = "kb_col6_pq6",
-						"kb_col7_pq7";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row3_pr3 {
-				nvidia,pins = "kb_row3_pr3",
-						"kb_row4_pr4",
-						"kb_row6_pr6";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk3_req_pee1 {
-				nvidia,pins = "clk3_req_pee1";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu2 {
-				nvidia,pins = "pu2";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			hdmi_int_pn7 {
-				nvidia,pins = "hdmi_int_pn7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <36>;
-				nvidia,pull-up-strength = <20>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
-			};
-			drive_sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <36>;
-				nvidia,pull-up-strength = <20>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-			drive_gma {
-				nvidia,pins = "drive_gma";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <2>;
-				nvidia,pull-up-strength = <2>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-		};
-	};
-
-	/* Usable on reworked devices only */
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		regulator@43 {
-			compatible = "ti,tps51632";
-			reg = <0x43>;
-			regulator-name = "vdd-cpu";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1520000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		palmas: pmic@58 {
-			compatible = "ti,palmas";
-			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			palmas_gpio: gpio {
-				compatible = "ti,palmas-gpio";
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			pmic {
-				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
-
-				regulators {
-					smps12 {
-						regulator-name = "vdd-ddr";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1500000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_1v8: smps3 {
-						regulator-name = "vdd-1v8";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-boot-on;
-					};
-
-					smps457 {
-						regulator-name = "vdd-soc";
-						regulator-min-microvolt = <900000>;
-						regulator-max-microvolt = <1400000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps8 {
-						regulator-name = "avdd-pll-1v05";
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps9 {
-						regulator-name = "vdd-2v85-emmc";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-						regulator-always-on;
-					};
-
-					smps10_out1 {
-						regulator-name = "vdd-fan";
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps10_out2 {
-						regulator-name = "vdd-5v0-sys";
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo2 {
-						regulator-name = "vdd-2v8-display";
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_1v2_ap: ldo3 {
-						regulator-name = "avdd-1v2";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo4 {
-						regulator-name = "vpp-fuse";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					ldo5 {
-						regulator-name = "avdd-hdmi-pll";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					ldo6 {
-						regulator-name = "vdd-sensor-2v8";
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					ldo8 {
-						regulator-name = "vdd-rtc";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1100000>;
-						regulator-always-on;
-						regulator-boot-on;
-						ti,enable-ldo8-tracking;
-					};
-
-					vddio_sdmmc3: ldo9 {
-						regulator-name = "vddio-sdmmc3";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldousb {
-						regulator-name = "avdd-usb-hdmi";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_3v3_sys: regen1 {
-						regulator-name = "rail-3v3";
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					regen2 {
-						regulator-name = "rail-5v0";
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-				};
-			};
-
-			rtc {
-				compatible = "ti,palmas-rtc";
-				interrupt-parent = <&palmas>;
-				interrupts = <8 0>;
-			};
-
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-	};
-
-	/* SD card */
-	sdhci@78000400 {
-		status = "okay";
-		bus-width = <4>;
-		vmmc-supply = <&vddio_sdmmc3>;
-		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
-	};
-
-	/* eMMC */
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		vmmc-supply = <&vdd_1v8>;
-		non-removable;
-	};
-
-	/* External USB port (must be powered) */
-	usb@7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-		nvidia,xcvr-setup = <7>;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		/* Should be changed to "otg" once we have vbus_supply */
-		/* As of now, USB devices need to be powered externally */
-		dr_mode = "host";
-	};
-
-	/* SHIELD controller */
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		nvidia,xcvr-setup = <7>;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 1 40000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-		power-supply = <&lcd_bl_en>;
-		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		back {
-			label = "Back";
-			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-		};
-
-		home {
-			label = "Home";
-			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-		};
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		lcd_bl_en: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "lcd_bl_en";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-		};
-
-		vdd_lcd: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_lcd_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			vin-supply = <&vdd_1v8>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v8_ts";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
-			regulator-boot-on;
-		};
-
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_3v3_ts";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
-
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_1v8_com";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			vin-supply = <&vdd_1v8>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
-
-		regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_3v3_com";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_sys>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
diff --git a/src/arm/tegra114-tn7.dts b/src/arm/tegra114-tn7.dts
deleted file mode 100644
index 963662145635..000000000000
--- a/src/arm/tegra114-tn7.dts
+++ /dev/null
@@ -1,348 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra114.dtsi"
-
-/ {
-	model = "Tegra Note 7";
-	compatible = "nvidia,tn7", "nvidia,tegra114";
-
-	chosen {
-		/* TN7's bootloader's arguments need to be overridden */
-		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
-		/* TN7's bootloader will place initrd at this address */
-		linux,initrd-start = <0x82000000>;
-		linux,initrd-end = <0x82800000>;
-	};
-
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <2>;
-			tlm,version-minor = <8>;
-		};
-	};
-
-	memory {
-		/* memory >= 0x37e00000 is reserved for firmware usage */
-		reg = <0x80000000 0x37e00000>;
-	};
-
-	host1x@50000000 {
-		dsi@54300000 {
-			status = "okay";
-
-			vdd-supply = <&vdd_1v2_ap>;
-
-			panel@0 {
-				compatible = "lg,ld070wx3-sl01";
-				reg = <0>;
-
-				power-supply = <&vdd_lcd>;
-				backlight = <&backlight>;
-			};
-		};
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		palmas: pmic@58 {
-			compatible = "ti,palmas";
-			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			palmas_gpio: gpio {
-				compatible = "ti,palmas-gpio";
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			pmic {
-				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
-
-				ldoln-in-supply = <&vdd_smps10_out2>;
-
-				regulators {
-					smps123 {
-						regulator-name = "vd-cpu";
-						regulator-min-microvolt = <1000000>;
-						regulator-max-microvolt = <1000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps45 {
-						regulator-name = "vd-soc";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1100000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps6 {
-						regulator-name = "va-lcd-hv";
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					smps7 {
-						regulator-name = "vd-ddr";
-						regulator-min-microvolt = <1350000>;
-						regulator-max-microvolt = <1350000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_1v8: smps8 {
-						regulator-name = "vs-pmu-1v8";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_2v9_sys: smps9 {
-						regulator-name = "vs-sys-2v9";
-						regulator-min-microvolt = <2900000>;
-						regulator-max-microvolt = <2900000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_smps10_out1: smps10_out1 {
-						regulator-name = "vd-smps10-out1";
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_smps10_out2: smps10_out2 {
-						regulator-name = "vd-smps10-out2";
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo1 {
-						regulator-name = "va-pllx";
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					vdd_1v2_ap: ldo2 {
-						regulator-name = "va-ap-1v2";
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo3 {
-						regulator-name = "vd-fuse";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo4 {
-						regulator-name = "vd-ts-hv";
-						regulator-min-microvolt = <3200000>;
-						regulator-max-microvolt = <3200000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo5 {
-						regulator-name = "va-cam2-hv";
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					ldo6 {
-						regulator-name = "va-sns-hv";
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					ldo7 {
-						regulator-name = "va-cam1-hv";
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					ldo8 {
-						regulator-name = "va-ap-rtc";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1100000>;
-						ti,enable-ldo8-tracking;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldo9 {
-						regulator-name = "vi-sdcard";
-						regulator-min-microvolt = <2900000>;
-						regulator-max-microvolt = <2900000>;
-					};
-
-					ldousb {
-						regulator-name = "avdd-usb";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					ldoln {
-						regulator-name = "va-hdmi";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-				};
-			};
-
-			rtc {
-				compatible = "ti,palmas-rtc";
-				interrupt-parent = <&palmas>;
-				interrupts = <8 0>;
-			};
-
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-	};
-
-	/* eMMC */
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		vmmc-supply = <&vdd_1v8>;
-		non-removable;
-	};
-
-	usb@7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-		nvidia,xcvr-setup = <7>;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		/* Should be changed to "otg" once we have vbus_supply */
-		/* As of now, USB devices need to be powered externally */
-		dr_mode = "host";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 1 40000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-		power-supply = <&lcd_bl_en>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-
-		volume_down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		volume_up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* FIXME: output of BQ24192 */
-		vs_sys: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VS_SYS";
-			regulator-min-microvolt = <4200000>;
-			regulator-max-microvolt = <4200000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		lcd_bl_en: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_LCD_BL";
-			regulator-min-microvolt = <16500000>;
-			regulator-max-microvolt = <16500000>;
-			gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vs_sys>;
-			regulator-boot-on;
-		};
-
-		vdd_lcd: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "VD_LCD_1V8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_1v8>;
-			regulator-boot-on;
-		};
-	};
-};
diff --git a/src/arm/tegra114.dtsi b/src/arm/tegra114.dtsi
deleted file mode 100644
index 80b8eddb4105..000000000000
--- a/src/arm/tegra114.dtsi
+++ /dev/null
@@ -1,767 +0,0 @@
-#include <dt-bindings/clock/tegra114-car.h>
-#include <dt-bindings/gpio/tegra-gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "nvidia,tegra114";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-	};
-
-	host1x@50000000 {
-		compatible = "nvidia,tegra114-host1x", "simple-bus";
-		reg = <0x50000000 0x00028000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
-			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
-		clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x54000000 0x54000000 0x01000000>;
-
-		gr2d@54140000 {
-			compatible = "nvidia,tegra114-gr2d", "nvidia,tegra20-gr2d";
-			reg = <0x54140000 0x00040000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA114_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
-		};
-
-		gr3d@54180000 {
-			compatible = "nvidia,tegra114-gr3d", "nvidia,tegra20-gr3d";
-			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car TEGRA114_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
-		};
-
-		dc@54200000 {
-			compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
-			reg = <0x54200000 0x00040000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA114_CLK_DISP1>,
-				 <&tegra_car TEGRA114_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			nvidia,head = <0>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		dc@54240000 {
-			compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
-			reg = <0x54240000 0x00040000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA114_CLK_DISP2>,
-				 <&tegra_car TEGRA114_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			nvidia,head = <1>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		hdmi@54280000 {
-			compatible = "nvidia,tegra114-hdmi";
-			reg = <0x54280000 0x00040000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA114_CLK_HDMI>,
-				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		dsi@54300000 {
-			compatible = "nvidia,tegra114-dsi";
-			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA114_CLK_DSIA>,
-				 <&tegra_car TEGRA114_CLK_DSIALP>,
-				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
-			clock-names = "dsi", "lp", "parent";
-			resets = <&tegra_car 48>;
-			reset-names = "dsi";
-			nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
-			status = "disabled";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		dsi@54400000 {
-			compatible = "nvidia,tegra114-dsi";
-			reg = <0x54400000 0x00040000>;
-			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
-				 <&tegra_car TEGRA114_CLK_DSIBLP>,
-				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
-			clock-names = "dsi", "lp", "parent";
-			resets = <&tegra_car 82>;
-			reset-names = "dsi";
-			nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */
-			status = "disabled";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	gic: interrupt-controller@50041000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x50041000 0x1000>,
-		      <0x50042000 0x1000>,
-		      <0x50044000 0x2000>,
-		      <0x50046000 0x2000>;
-		interrupts = <GIC_PPI 9
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	timer@60005000 {
-		compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer";
-		reg = <0x60005000 0x400>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_TIMER>;
-	};
-
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra114-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	apbdma: dma@6000a000 {
-		compatible = "nvidia,tegra114-apbdma";
-		reg = <0x6000a000 0x1400>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
-		resets = <&tegra_car 34>;
-		reset-names = "dma";
-		#dma-cells = <1>;
-	};
-
-	ahb: ahb@6000c004 {
-		compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
-		reg = <0x6000c004 0x14c>;
-	};
-
-	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
-		reg = <0x6000d000 0x1000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	apbmisc@70000800 {
-		compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64   /* Chip revision */
-		       0x70000008 0x04>; /* Strapping options */
-	};
-
-	pinmux: pinmux@70000868 {
-		compatible = "nvidia,tegra114-pinmux";
-		reg = <0x70000868 0x148		/* Pad control registers */
-		       0x70003000 0x40c>;	/* Mux registers */
-	};
-
-	/*
-	 * There are two serial driver i.e. 8250 based simple serial
-	 * driver and APB DMA based serial driver for higher baudrate
-	 * and performace. To enable the 8250 based driver, the compatible
-	 * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable
-	 * the APB DMA based serial driver, the comptible is
-	 * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart".
-	 */
-	uarta: serial@70006000 {
-		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
-		reg = <0x70006000 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_UARTA>;
-		resets = <&tegra_car 6>;
-		reset-names = "serial";
-		dmas = <&apbdma 8>, <&apbdma 8>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartb: serial@70006040 {
-		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
-		reg = <0x70006040 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_UARTB>;
-		resets = <&tegra_car 7>;
-		reset-names = "serial";
-		dmas = <&apbdma 9>, <&apbdma 9>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartc: serial@70006200 {
-		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
-		reg = <0x70006200 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_UARTC>;
-		resets = <&tegra_car 55>;
-		reset-names = "serial";
-		dmas = <&apbdma 10>, <&apbdma 10>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartd: serial@70006300 {
-		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
-		reg = <0x70006300 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_UARTD>;
-		resets = <&tegra_car 65>;
-		reset-names = "serial";
-		dmas = <&apbdma 19>, <&apbdma 19>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	pwm: pwm@7000a000 {
-		compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car TEGRA114_CLK_PWM>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-		status = "disabled";
-	};
-
-	i2c@7000c000 {
-		compatible = "nvidia,tegra114-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_I2C1>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 21>, <&apbdma 21>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c400 {
-		compatible = "nvidia,tegra114-i2c";
-		reg = <0x7000c400 0x100>;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_I2C2>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 54>;
-		reset-names = "i2c";
-		dmas = <&apbdma 22>, <&apbdma 22>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c500 {
-		compatible = "nvidia,tegra114-i2c";
-		reg = <0x7000c500 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_I2C3>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-		dmas = <&apbdma 23>, <&apbdma 23>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c700 {
-		compatible = "nvidia,tegra114-i2c";
-		reg = <0x7000c700 0x100>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_I2C4>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 103>;
-		reset-names = "i2c";
-		dmas = <&apbdma 26>, <&apbdma 26>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000d000 {
-		compatible = "nvidia,tegra114-i2c";
-		reg = <0x7000d000 0x100>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_I2C5>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 47>;
-		reset-names = "i2c";
-		dmas = <&apbdma 24>, <&apbdma 24>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d400 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000d400 0x200>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC1>;
-		clock-names = "spi";
-		resets = <&tegra_car 41>;
-		reset-names = "spi";
-		dmas = <&apbdma 15>, <&apbdma 15>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d600 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000d600 0x200>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC2>;
-		clock-names = "spi";
-		resets = <&tegra_car 44>;
-		reset-names = "spi";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d800 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000d800 0x200>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC3>;
-		clock-names = "spi";
-		resets = <&tegra_car 46>;
-		reset-names = "spi";
-		dmas = <&apbdma 17>, <&apbdma 17>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000da00 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000da00 0x200>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC4>;
-		clock-names = "spi";
-		resets = <&tegra_car 68>;
-		reset-names = "spi";
-		dmas = <&apbdma 18>, <&apbdma 18>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000dc00 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000dc00 0x200>;
-		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC5>;
-		clock-names = "spi";
-		resets = <&tegra_car 104>;
-		reset-names = "spi";
-		dmas = <&apbdma 27>, <&apbdma 27>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000de00 {
-		compatible = "nvidia,tegra114-spi";
-		reg = <0x7000de00 0x200>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA114_CLK_SBC6>;
-		clock-names = "spi";
-		resets = <&tegra_car 105>;
-		reset-names = "spi";
-		dmas = <&apbdma 28>, <&apbdma 28>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	rtc@7000e000 {
-		compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_RTC>;
-	};
-
-	kbc@7000e200 {
-		compatible = "nvidia,tegra114-kbc";
-		reg = <0x7000e200 0x100>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_KBC>;
-		resets = <&tegra_car 36>;
-		reset-names = "kbc";
-		status = "disabled";
-	};
-
-	pmc@7000e400 {
-		compatible = "nvidia,tegra114-pmc";
-		reg = <0x7000e400 0x400>;
-		clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-	};
-
-	fuse@7000f800 {
-		compatible = "nvidia,tegra114-efuse";
-		reg = <0x7000f800 0x400>;
-		clocks = <&tegra_car TEGRA114_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-	iommu@70019010 {
-		compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu";
-		reg = <0x70019010 0x02c
-		       0x700191f0 0x010
-		       0x70019228 0x074>;
-		nvidia,#asids = <4>;
-		dma-window = <0 0x40000000>;
-		nvidia,swgroups = <0x18659fe>;
-		nvidia,ahb = <&ahb>;
-	};
-
-	ahub@70080000 {
-		compatible = "nvidia,tegra114-ahub";
-		reg = <0x70080000 0x200>,
-		      <0x70080200 0x100>,
-		      <0x70081000 0x200>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
-			 <&tegra_car TEGRA114_CLK_APBIF>;
-		clock-names = "d_audio", "apbif";
-		resets = <&tegra_car 106>, /* d_audio */
-			 <&tegra_car 107>, /* apbif */
-			 <&tegra_car 30>,  /* i2s0 */
-			 <&tegra_car 11>,  /* i2s1 */
-			 <&tegra_car 18>,  /* i2s2 */
-			 <&tegra_car 101>, /* i2s3 */
-			 <&tegra_car 102>, /* i2s4 */
-			 <&tegra_car 108>, /* dam0 */
-			 <&tegra_car 109>, /* dam1 */
-			 <&tegra_car 110>, /* dam2 */
-			 <&tegra_car 10>,  /* spdif */
-			 <&tegra_car 153>, /* amx */
-			 <&tegra_car 154>; /* adx */
-		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
-			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
-			      "spdif", "amx", "adx";
-		dmas = <&apbdma 1>, <&apbdma 1>,
-		       <&apbdma 2>, <&apbdma 2>,
-		       <&apbdma 3>, <&apbdma 3>,
-		       <&apbdma 4>, <&apbdma 4>,
-		       <&apbdma 6>, <&apbdma 6>,
-		       <&apbdma 7>, <&apbdma 7>,
-		       <&apbdma 12>, <&apbdma 12>,
-		       <&apbdma 13>, <&apbdma 13>,
-		       <&apbdma 14>, <&apbdma 14>,
-		       <&apbdma 29>, <&apbdma 29>;
-		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
-			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
-			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
-			    "rx9", "tx9";
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		tegra_i2s0: i2s@70080300 {
-			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
-			reg = <0x70080300 0x100>;
-			nvidia,ahub-cif-ids = <4 4>;
-			clocks = <&tegra_car TEGRA114_CLK_I2S0>;
-			resets = <&tegra_car 30>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s1: i2s@70080400 {
-			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
-			reg = <0x70080400 0x100>;
-			nvidia,ahub-cif-ids = <5 5>;
-			clocks = <&tegra_car TEGRA114_CLK_I2S1>;
-			resets = <&tegra_car 11>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s2: i2s@70080500 {
-			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
-			reg = <0x70080500 0x100>;
-			nvidia,ahub-cif-ids = <6 6>;
-			clocks = <&tegra_car TEGRA114_CLK_I2S2>;
-			resets = <&tegra_car 18>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s3: i2s@70080600 {
-			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
-			reg = <0x70080600 0x100>;
-			nvidia,ahub-cif-ids = <7 7>;
-			clocks = <&tegra_car TEGRA114_CLK_I2S3>;
-			resets = <&tegra_car 101>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s4: i2s@70080700 {
-			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
-			reg = <0x70080700 0x100>;
-			nvidia,ahub-cif-ids = <8 8>;
-			clocks = <&tegra_car TEGRA114_CLK_I2S4>;
-			resets = <&tegra_car 102>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-	};
-
-	mipi: mipi@700e3000 {
-		compatible = "nvidia,tegra114-mipi";
-		reg = <0x700e3000 0x100>;
-		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
-		#nvidia,mipi-calibrate-cells = <1>;
-	};
-
-	sdhci@78000000 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
-		reg = <0x78000000 0x200>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
-		resets = <&tegra_car 14>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000200 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
-		reg = <0x78000200 0x200>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
-		resets = <&tegra_car 9>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000400 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
-		reg = <0x78000400 0x200>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
-		resets = <&tegra_car 69>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000600 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
-		reg = <0x78000600 0x200>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
-		resets = <&tegra_car 15>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	usb@7d000000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x7d000000 0x4000>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA114_CLK_USBD>;
-		resets = <&tegra_car 22>;
-		reset-names = "usb";
-		nvidia,phy = <&phy1>;
-		status = "disabled";
-	};
-
-	phy1: usb-phy@7d000000 {
-		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA114_CLK_USBD>,
-			 <&tegra_car TEGRA114_CLK_PLL_U>,
-			 <&tegra_car TEGRA114_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 22>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <0>;
-		nvidia,xcvr-lsrslew = <3>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,xcvr-hsslew = <12>;
-		nvidia,has-utmi-pad-registers;
-		status = "disabled";
-	};
-
-	usb@7d008000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x7d008000 0x4000>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA114_CLK_USB3>;
-		resets = <&tegra_car 59>;
-		reset-names = "usb";
-		nvidia,phy = <&phy3>;
-		status = "disabled";
-	};
-
-	phy3: usb-phy@7d008000 {
-		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA114_CLK_USB3>,
-			 <&tegra_car TEGRA114_CLK_PLL_U>,
-			 <&tegra_car TEGRA114_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 59>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <0>;
-		nvidia,xcvr-lsrslew = <3>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,xcvr-hsslew = <12>;
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts =
-			<GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			<GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-};
diff --git a/src/arm/tegra124-jetson-tk1.dts b/src/arm/tegra124-jetson-tk1.dts
deleted file mode 100644
index 624b0fba2d0a..000000000000
--- a/src/arm/tegra124-jetson-tk1.dts
+++ /dev/null
@@ -1,1854 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra124.dtsi"
-
-/ {
-	model = "NVIDIA Tegra124 Jetson TK1";
-	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
-
-	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
-	};
-
-	memory {
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
-			status = "okay";
-
-			hdmi-supply = <&vdd_5v0_hdmi>;
-			pll-supply = <&vdd_hdmi_pll>;
-			vdd-supply = <&vdd_3v3_hdmi>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux: pinmux@0,70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			clk_32k_out_pa0 {
-				nvidia,pins = "clk_32k_out_pa0";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart3_cts_n_pa1 {
-				nvidia,pins = "uart3_cts_n_pa1";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_fs_pa2 {
-				nvidia,pins = "dap2_fs_pa2";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_sclk_pa3 {
-				nvidia,pins = "dap2_sclk_pa3";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_din_pa4 {
-				nvidia,pins = "dap2_din_pa4";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_dout_pa5 {
-				nvidia,pins = "dap2_dout_pa5";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins = "sdmmc3_cmd_pa7";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pb0 {
-				nvidia,pins = "pb0";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pb1 {
-				nvidia,pins = "pb1";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_dat3_pb4 {
-				nvidia,pins = "sdmmc3_dat3_pb4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_dat2_pb5 {
-				nvidia,pins = "sdmmc3_dat2_pb5";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_dat1_pb6 {
-				nvidia,pins = "sdmmc3_dat1_pb6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_dat0_pb7 {
-				nvidia,pins = "sdmmc3_dat0_pb7";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart3_rts_n_pc0 {
-				nvidia,pins = "uart3_rts_n_pc0";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_txd_pc2 {
-				nvidia,pins = "uart2_txd_pc2";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_rxd_pc3 {
-				nvidia,pins = "uart2_rxd_pc3";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gen1_i2c_scl_pc4 {
-				nvidia,pins = "gen1_i2c_scl_pc4";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			gen1_i2c_sda_pc5 {
-				nvidia,pins = "gen1_i2c_sda_pc5";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			pc7 {
-				nvidia,pins = "pc7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pg0 {
-				nvidia,pins = "pg0";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pg1 {
-				nvidia,pins = "pg1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pg2 {
-				nvidia,pins = "pg2";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pg3 {
-				nvidia,pins = "pg3";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pg4 {
-				nvidia,pins = "pg4";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pg5 {
-				nvidia,pins = "pg5";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pg6 {
-				nvidia,pins = "pg6";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pg7 {
-				nvidia,pins = "pg7";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ph0 {
-				nvidia,pins = "ph0";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph1 {
-				nvidia,pins = "ph1";
-				nvidia,function = "pwm1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph2 {
-				nvidia,pins = "ph2";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph3 {
-				nvidia,pins = "ph3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph4 {
-				nvidia,pins = "ph4";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ph5 {
-				nvidia,pins = "ph5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph6 {
-				nvidia,pins = "ph6";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ph7 {
-				nvidia,pins = "ph7";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi0 {
-				nvidia,pins = "pi0";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi1 {
-				nvidia,pins = "pi1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi2 {
-				nvidia,pins = "pi2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi3 {
-				nvidia,pins = "pi3";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi4 {
-				nvidia,pins = "pi4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pi5 {
-				nvidia,pins = "pi5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pi6 {
-				nvidia,pins = "pi6";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pi7 {
-				nvidia,pins = "pi7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pj0 {
-				nvidia,pins = "pj0";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pj2 {
-				nvidia,pins = "pj2";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_cts_n_pj5 {
-				nvidia,pins = "uart2_cts_n_pj5";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_rts_n_pj6 {
-				nvidia,pins = "uart2_rts_n_pj6";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pj7 {
-				nvidia,pins = "pj7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pk0 {
-				nvidia,pins = "pk0";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pk1 {
-				nvidia,pins = "pk1";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pk2 {
-				nvidia,pins = "pk2";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pk3 {
-				nvidia,pins = "pk3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pk4 {
-				nvidia,pins = "pk4";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			spdif_out_pk5 {
-				nvidia,pins = "spdif_out_pk5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			spdif_in_pk6 {
-				nvidia,pins = "spdif_in_pk6";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pk7 {
-				nvidia,pins = "pk7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap1_fs_pn0 {
-				nvidia,pins = "dap1_fs_pn0";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap1_din_pn1 {
-				nvidia,pins = "dap1_din_pn1";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap1_dout_pn2 {
-				nvidia,pins = "dap1_dout_pn2";
-				nvidia,function = "sata";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap1_sclk_pn3 {
-				nvidia,pins = "dap1_sclk_pn3";
-				nvidia,function = "i2s0";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			usb_vbus_en0_pn4 {
-				nvidia,pins = "usb_vbus_en0_pn4";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			usb_vbus_en1_pn5 {
-				nvidia,pins = "usb_vbus_en1_pn5";
-				nvidia,function = "usb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			hdmi_int_pn7 {
-				nvidia,pins = "hdmi_int_pn7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_data7_po0 {
-				nvidia,pins = "ulpi_data7_po0";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data0_po1 {
-				nvidia,pins = "ulpi_data0_po1";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data1_po2 {
-				nvidia,pins = "ulpi_data1_po2";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data2_po3 {
-				nvidia,pins = "ulpi_data2_po3";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data3_po4 {
-				nvidia,pins = "ulpi_data3_po4";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data4_po5 {
-				nvidia,pins = "ulpi_data4_po5";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_data5_po6 {
-				nvidia,pins = "ulpi_data5_po6";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_data6_po7 {
-				nvidia,pins = "ulpi_data6_po7";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap3_fs_pp0 {
-				nvidia,pins = "dap3_fs_pp0";
-				nvidia,function = "i2s2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap3_din_pp1 {
-				nvidia,pins = "dap3_din_pp1";
-				nvidia,function = "i2s2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap3_dout_pp2 {
-				nvidia,pins = "dap3_dout_pp2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap3_sclk_pp3 {
-				nvidia,pins = "dap3_sclk_pp3";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap4_fs_pp4 {
-				nvidia,pins = "dap4_fs_pp4";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_din_pp5 {
-				nvidia,pins = "dap4_din_pp5";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_dout_pp6 {
-				nvidia,pins = "dap4_dout_pp6";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_sclk_pp7 {
-				nvidia,pins = "dap4_sclk_pp7";
-				nvidia,function = "i2s3";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col0_pq0 {
-				nvidia,pins = "kb_col0_pq0";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col1_pq1 {
-				nvidia,pins = "kb_col1_pq1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col2_pq2 {
-				nvidia,pins = "kb_col2_pq2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col3_pq3 {
-				nvidia,pins = "kb_col3_pq3";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_col4_pq4 {
-				nvidia,pins = "kb_col4_pq4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col5_pq5 {
-				nvidia,pins = "kb_col5_pq5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col6_pq6 {
-				nvidia,pins = "kb_col6_pq6";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col7_pq7 {
-				nvidia,pins = "kb_col7_pq7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row0_pr0 {
-				nvidia,pins = "kb_row0_pr0";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row1_pr1 {
-				nvidia,pins = "kb_row1_pr1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row2_pr2 {
-				nvidia,pins = "kb_row2_pr2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row3_pr3 {
-				nvidia,pins = "kb_row3_pr3";
-				nvidia,function = "sys";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row4_pr4 {
-				nvidia,pins = "kb_row4_pr4";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row5_pr5 {
-				nvidia,pins = "kb_row5_pr5";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row6_pr6 {
-				nvidia,pins = "kb_row6_pr6";
-				nvidia,function = "displaya_alt";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row7_pr7 {
-				nvidia,pins = "kb_row7_pr7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row8_ps0 {
-				nvidia,pins = "kb_row8_ps0";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row9_ps1 {
-				nvidia,pins = "kb_row9_ps1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row10_ps2 {
-				nvidia,pins = "kb_row10_ps2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row11_ps3 {
-				nvidia,pins = "kb_row11_ps3";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row12_ps4 {
-				nvidia,pins = "kb_row12_ps4";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row13_ps5 {
-				nvidia,pins = "kb_row13_ps5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row14_ps6 {
-				nvidia,pins = "kb_row14_ps6";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row15_ps7 {
-				nvidia,pins = "kb_row15_ps7";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row16_pt0 {
-				nvidia,pins = "kb_row16_pt0";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row17_pt1 {
-				nvidia,pins = "kb_row17_pt1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gen2_i2c_scl_pt5 {
-				nvidia,pins = "gen2_i2c_scl_pt5";
-				nvidia,function = "i2c2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			gen2_i2c_sda_pt6 {
-				nvidia,pins = "gen2_i2c_sda_pt6";
-				nvidia,function = "i2c2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_cmd_pt7 {
-				nvidia,pins = "sdmmc4_cmd_pt7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pu0 {
-				nvidia,pins = "pu0";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu1 {
-				nvidia,pins = "pu1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pu2 {
-				nvidia,pins = "pu2";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pu3 {
-				nvidia,pins = "pu3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu4 {
-				nvidia,pins = "pu4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pu5 {
-				nvidia,pins = "pu5";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pu6 {
-				nvidia,pins = "pu6";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pv0 {
-				nvidia,pins = "pv0";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pv1 {
-				nvidia,pins = "pv1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_cd_n_pv2 {
-				nvidia,pins = "sdmmc3_cd_n_pv2";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_wp_n_pv3 {
-				nvidia,pins = "sdmmc1_wp_n_pv3";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ddc_scl_pv4 {
-				nvidia,pins = "ddc_scl_pv4";
-				nvidia,function = "i2c4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
-			};
-			ddc_sda_pv5 {
-				nvidia,pins = "ddc_sda_pv5";
-				nvidia,function = "i2c4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_w2_aud_pw2 {
-				nvidia,pins = "gpio_w2_aud_pw2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_w3_aud_pw3 {
-				nvidia,pins = "gpio_w3_aud_pw3";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dap_mclk1_pw4 {
-				nvidia,pins = "dap_mclk1_pw4";
-				nvidia,function = "extperiph1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk2_out_pw5 {
-				nvidia,pins = "clk2_out_pw5";
-				nvidia,function = "extperiph2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_txd_pw6 {
-				nvidia,pins = "uart3_txd_pw6";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_rxd_pw7 {
-				nvidia,pins = "uart3_rxd_pw7";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dvfs_pwm_px0 {
-				nvidia,pins = "dvfs_pwm_px0";
-				nvidia,function = "cldvfs";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_x1_aud_px1 {
-				nvidia,pins = "gpio_x1_aud_px1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dvfs_clk_px2 {
-				nvidia,pins = "dvfs_clk_px2";
-				nvidia,function = "cldvfs";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_x3_aud_px3 {
-				nvidia,pins = "gpio_x3_aud_px3";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x4_aud_px4 {
-				nvidia,pins = "gpio_x4_aud_px4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_x5_aud_px5 {
-				nvidia,pins = "gpio_x5_aud_px5";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x6_aud_px6 {
-				nvidia,pins = "gpio_x6_aud_px6";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_x7_aud_px7 {
-				nvidia,pins = "gpio_x7_aud_px7";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_clk_py0 {
-				nvidia,pins = "ulpi_clk_py0";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_dir_py1 {
-				nvidia,pins = "ulpi_dir_py1";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi_nxt_py2 {
-				nvidia,pins = "ulpi_nxt_py2";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_stp_py3 {
-				nvidia,pins = "ulpi_stp_py3";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_dat3_py4 {
-				nvidia,pins = "sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_dat2_py5 {
-				nvidia,pins = "sdmmc1_dat2_py5";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_dat1_py6 {
-				nvidia,pins = "sdmmc1_dat1_py6";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_dat0_py7 {
-				nvidia,pins = "sdmmc1_dat0_py7";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins = "sdmmc1_cmd_pz1";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pwr_i2c_scl_pz6 {
-				nvidia,pins = "pwr_i2c_scl_pz6";
-				nvidia,function = "i2cpwr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			pwr_i2c_sda_pz7 {
-				nvidia,pins = "pwr_i2c_sda_pz7";
-				nvidia,function = "i2cpwr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins = "sdmmc4_dat0_paa0";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat1_paa1 {
-				nvidia,pins = "sdmmc4_dat1_paa1";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat2_paa2 {
-				nvidia,pins = "sdmmc4_dat2_paa2";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat3_paa3 {
-				nvidia,pins = "sdmmc4_dat3_paa3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat4_paa4 {
-				nvidia,pins = "sdmmc4_dat4_paa4";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat5_paa5 {
-				nvidia,pins = "sdmmc4_dat5_paa5";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat6_paa6 {
-				nvidia,pins = "sdmmc4_dat6_paa6";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_dat7_paa7 {
-				nvidia,pins = "sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pbb0 {
-				nvidia,pins = "pbb0";
-				nvidia,function = "vimclk2_alt";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cam_i2c_scl_pbb1 {
-				nvidia,pins = "cam_i2c_scl_pbb1";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			cam_i2c_sda_pbb2 {
-				nvidia,pins = "cam_i2c_sda_pbb2";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			pbb3 {
-				nvidia,pins = "pbb3";
-				nvidia,function = "vgp3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pbb4 {
-				nvidia,pins = "pbb4";
-				nvidia,function = "vgp4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pbb5 {
-				nvidia,pins = "pbb5";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pbb6 {
-				nvidia,pins = "pbb6";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pbb7 {
-				nvidia,pins = "pbb7";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cam_mclk_pcc0 {
-				nvidia,pins = "cam_mclk_pcc0";
-				nvidia,function = "vi_alt3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pcc1 {
-				nvidia,pins = "pcc1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			pcc2 {
-				nvidia,pins = "pcc2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			clk2_req_pcc5 {
-				nvidia,pins = "clk2_req_pcc5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk3_out_pee0 {
-				nvidia,pins = "clk3_out_pee0";
-				nvidia,function = "extperiph3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			clk3_req_pee1 {
-				nvidia,pins = "clk3_req_pee1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			dap_mclk1_req_pee2 {
-				nvidia,pins = "dap_mclk1_req_pee2";
-				nvidia,function = "sata";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			hdmi_cec_pee3 {
-				nvidia,pins = "hdmi_cec_pee3";
-				nvidia,function = "cec";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_clk_lb_out_pee4 {
-				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc3_clk_lb_in_pee5 {
-				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			dp_hpd_pff0 {
-				nvidia,pins = "dp_hpd_pff0";
-				nvidia,function = "dp";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			usb_vbus_en2_pff1 {
-				nvidia,pins = "usb_vbus_en2_pff1";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			pff2 {
-				nvidia,pins = "pff2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			core_pwr_req {
-				nvidia,pins = "core_pwr_req";
-				nvidia,function = "pwron";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			cpu_pwr_req {
-				nvidia,pins = "cpu_pwr_req";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_int_n {
-				nvidia,pins = "pwr_int_n";
-				nvidia,function = "pmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			reset_out_n {
-				nvidia,pins = "reset_out_n";
-				nvidia,function = "reset_out_n";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			owr {
-				nvidia,pins = "owr";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
-			};
-			clk_32k_in {
-				nvidia,pins = "clk_32k_in";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			jtag_rtck {
-				nvidia,pins = "jtag_rtck";
-				nvidia,function = "rtck";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	/* DB9 serial port */
-	serial@0,70006300 {
-		status = "okay";
-	};
-
-	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
-	i2c@0,7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		rt5639: audio-codec@1c {
-			compatible = "realtek,rt5639";
-			reg = <0x1c>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
-			realtek,ldo1-en-gpios =
-				<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-		};
-
-		temperature-sensor@4c {
-			compatible = "ti,tmp451";
-			reg = <0x4c>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-		};
-
-		eeprom@56 {
-			compatible = "atmel,24c02";
-			reg = <0x56>;
-			pagesize = <8>;
-		};
-	};
-
-	/* Expansion GEN2_I2C_* */
-	i2c@0,7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	/* Expansion CAM_I2C_* */
-	i2c@0,7000c500 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	/* HDMI DDC */
-	hdmi_ddc: i2c@0,7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	/* Expansion PWR_I2C_*, on-board components */
-	i2c@0,7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: pmic@40 {
-			compatible = "ams,as3722";
-			reg = <0x40>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ams,system-power-controller;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&as3722_default>;
-
-			as3722_default: pinmux {
-				gpio0 {
-					pins = "gpio0";
-					function = "gpio";
-					bias-pull-down;
-				};
-
-				gpio1_2_4_7 {
-					pins = "gpio1", "gpio2", "gpio4", "gpio7";
-					function = "gpio";
-					bias-pull-up;
-				};
-
-				gpio3_5_6 {
-					pins = "gpio3", "gpio5", "gpio6";
-					bias-high-impedance;
-				};
-			};
-
-			regulators {
-				vsup-sd2-supply = <&vdd_5v0_sys>;
-				vsup-sd3-supply = <&vdd_5v0_sys>;
-				vsup-sd4-supply = <&vdd_5v0_sys>;
-				vsup-sd5-supply = <&vdd_5v0_sys>;
-				vin-ldo0-supply = <&vdd_1v35_lp0>;
-				vin-ldo1-6-supply = <&vdd_3v3_run>;
-				vin-ldo2-5-7-supply = <&vddio_1v8>;
-				vin-ldo3-4-supply = <&vdd_3v3_sys>;
-				vin-ldo9-10-supply = <&vdd_5v0_sys>;
-				vin-ldo11-supply = <&vdd_3v3_run>;
-
-				sd0 {
-					regulator-name = "+VDD_CPU_AP";
-					regulator-min-microvolt = <700000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-min-microamp = <3500000>;
-					regulator-max-microamp = <3500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					ams,ext-control = <2>;
-				};
-
-				sd1 {
-					regulator-name = "+VDD_CORE";
-					regulator-min-microvolt = <700000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-min-microamp = <2500000>;
-					regulator-max-microamp = <2500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					ams,ext-control = <1>;
-				};
-
-				vdd_1v35_lp0: sd2 {
-					regulator-name = "+1.35V_LP0(sd2)";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				sd3 {
-					regulator-name = "+1.35V_LP0(sd3)";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_1v05_run: sd4 {
-					regulator-name = "+1.05V_RUN";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				vddio_1v8: sd5 {
-					regulator-name = "+1.8V_VDDIO";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				sd6 {
-					regulator-name = "+VDD_GPU_AP";
-					regulator-min-microvolt = <650000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-min-microamp = <3500000>;
-					regulator-max-microamp = <3500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo0 {
-					regulator-name = "+1.05V_RUN_AVDD";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-boot-on;
-					regulator-always-on;
-					ams,ext-control = <1>;
-				};
-
-				ldo1 {
-					regulator-name = "+1.8V_RUN_CAM";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2 {
-					regulator-name = "+1.2V_GEN_AVDD";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo3 {
-					regulator-name = "+1.05V_LP0_VDD_RTC";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-boot-on;
-					regulator-always-on;
-					ams,enable-tracking;
-				};
-
-				ldo4 {
-					regulator-name = "+2.8V_RUN_CAM";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo5 {
-					regulator-name = "+1.2V_RUN_CAM_FRONT";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				vddio_sdmmc3: ldo6 {
-					regulator-name = "+VDDIO_SDMMC3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo7 {
-					regulator-name = "+1.05V_RUN_CAM_REAR";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				ldo9 {
-					regulator-name = "+3.3V_RUN_TOUCH";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo10 {
-					regulator-name = "+2.8V_RUN_CAM_AF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo11 {
-					regulator-name = "+1.8V_RUN_VPP_FUSE";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-			};
-		};
-	};
-
-	/* Expansion TS_SPI_* */
-	spi@0,7000d400 {
-		status = "okay";
-	};
-
-	/* Internal SPI */
-	spi@0,7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spi-flash@0 {
-			compatible = "winbond,w25q32dw";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-
-	pmc@0,7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <500>;
-		nvidia,cpu-pwr-off-time = <300>;
-		nvidia,core-pwr-good-time = <641 3845>;
-		nvidia,core-pwr-off-time = <61036>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	padctl@0,7009f000 {
-		pinctrl-0 = <&padctl_default>;
-		pinctrl-names = "default";
-
-		padctl_default: pinmux {
-			usb3 {
-				nvidia,lanes = "pcie-0", "pcie-1";
-				nvidia,function = "usb3";
-				nvidia,iddq = <0>;
-			};
-
-			pcie {
-				nvidia,lanes = "pcie-2", "pcie-3",
-					       "pcie-4";
-				nvidia,function = "pcie";
-				nvidia,iddq = <0>;
-			};
-
-			sata {
-				nvidia,lanes = "sata-0";
-				nvidia,function = "sata";
-				nvidia,iddq = <0>;
-			};
-		};
-	};
-
-	/* SD card */
-	sdhci@0,700b0400 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
-		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		vqmmc-supply = <&vddio_sdmmc3>;
-	};
-
-	/* eMMC */
-	sdhci@0,700b0600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	ahub@0,70300000 {
-		i2s@0,70301100 {
-			status = "okay";
-		};
-	};
-
-	/* mini-PCIe USB */
-	usb@0,7d004000 {
-		status = "okay";
-	};
-
-	usb-phy@0,7d004000 {
-		status = "okay";
-	};
-
-	/* USB A connector */
-	usb@0,7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@0,7d008000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb3_vbus>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+VDD_MUX";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+5V_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
-
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "+3.3V_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
-
-		vdd_3v3_run: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "+3.3V_RUN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_3v3_hdmi: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_run>;
-		};
-
-		vdd_usb1_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "+USB0_VBUS_SW";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_usb3_vbus: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+5V_USB_HS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_3v3_lp0: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "+3.3V_LP0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_hdmi_pll: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-			vin-supply = <&vdd_1v05_run>;
-		};
-
-		vdd_5v0_hdmi: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "+5V_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-rt5640-jetson-tk1",
-			     "nvidia,tegra-audio-rt5640";
-		nvidia,model = "NVIDIA Tegra Jetson TK1";
-
-		nvidia,audio-routing =
-			"Headphones", "HPOR",
-			"Headphones", "HPOL",
-			"Mic Jack", "MICBIAS1",
-			"IN2P", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&rt5639>;
-
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
-
-		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra124-venice2.dts b/src/arm/tegra124-venice2.dts
deleted file mode 100644
index 70ad91d1a20b..000000000000
--- a/src/arm/tegra124-venice2.dts
+++ /dev/null
@@ -1,1147 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra124.dtsi"
-
-/ {
-	model = "NVIDIA Tegra124 Venice2";
-	compatible = "nvidia,venice2", "nvidia,tegra124";
-
-	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
-	};
-
-	memory {
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
-			status = "okay";
-
-			vdd-supply = <&vdd_3v3_hdmi>;
-			pll-supply = <&vdd_hdmi_pll>;
-			hdmi-supply = <&vdd_5v0_hdmi>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-		};
-
-		sor@0,54540000 {
-			status = "okay";
-
-			nvidia,dpaux = <&dpaux>;
-			nvidia,panel = <&panel>;
-		};
-
-		dpaux: dpaux@0,545c0000 {
-			vdd-supply = <&vdd_3v3_panel>;
-			status = "okay";
-		};
-	};
-
-	pinmux: pinmux@0,70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinmux_default>;
-
-		pinmux_default: common {
-			dap_mclk1_pw4 {
-				nvidia,pins = "dap_mclk1_pw4";
-				nvidia,function = "extperiph1";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dap1_din_pn1 {
-				nvidia,pins = "dap1_din_pn1";
-				nvidia,function = "i2s0";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			dap1_dout_pn2 {
-				nvidia,pins = "dap1_dout_pn2",
-					      "dap1_fs_pn0",
-					      "dap1_sclk_pn3";
-				nvidia,function = "i2s0";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			dap2_din_pa4 {
-				nvidia,pins = "dap2_din_pa4";
-				nvidia,function = "i2s1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dap2_dout_pa5 {
-				nvidia,pins = "dap2_dout_pa5",
-					      "dap2_fs_pa2",
-					      "dap2_sclk_pa3";
-				nvidia,function = "i2s1";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dvfs_pwm_px0 {
-				nvidia,pins = "dvfs_pwm_px0",
-					      "dvfs_clk_px2";
-				nvidia,function = "cldvfs";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_clk_py0 {
-				nvidia,pins = "ulpi_clk_py0",
-					      "ulpi_nxt_py2",
-					      "ulpi_stp_py3";
-				nvidia,function = "spi1";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_dir_py1 {
-				nvidia,pins = "ulpi_dir_py1";
-				nvidia,function = "spi1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			cam_i2c_scl_pbb1 {
-				nvidia,pins = "cam_i2c_scl_pbb1",
-					      "cam_i2c_sda_pbb2";
-				nvidia,function = "i2c3";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			gen2_i2c_scl_pt5 {
-				nvidia,pins = "gen2_i2c_scl_pt5",
-					      "gen2_i2c_sda_pt6";
-				nvidia,function = "i2c2";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			pg4 {
-				nvidia,pins = "pg4",
-					      "pg5",
-					      "pg6",
-					      "pi3";
-				nvidia,function = "spi4";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pg7 {
-				nvidia,pins = "pg7";
-				nvidia,function = "spi4";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			ph1 {
-				nvidia,pins = "ph1";
-				nvidia,function = "pwm1";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pk0 {
-				nvidia,pins = "pk0",
-					      "kb_row15_ps7",
-					      "clk_32k_out_pa0";
-				nvidia,function = "soc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins = "sdmmc1_cmd_pz1",
-					      "sdmmc1_dat0_py7",
-					      "sdmmc1_dat1_py6",
-					      "sdmmc1_dat2_py5",
-					      "sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins = "sdmmc3_cmd_pa7",
-					      "sdmmc3_dat0_pb7",
-					      "sdmmc3_dat1_pb6",
-					      "sdmmc3_dat2_pb5",
-					      "sdmmc3_dat3_pb4",
-					      "sdmmc3_clk_lb_out_pee4",
-					      "sdmmc3_clk_lb_in_pee5";
-				nvidia,function = "sdmmc3";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins = "sdmmc4_clk_pcc4";
-				nvidia,function = "sdmmc4";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_cmd_pt7 {
-				nvidia,pins = "sdmmc4_cmd_pt7",
-					      "sdmmc4_dat0_paa0",
-					      "sdmmc4_dat1_paa1",
-					      "sdmmc4_dat2_paa2",
-					      "sdmmc4_dat3_paa3",
-					      "sdmmc4_dat4_paa4",
-					      "sdmmc4_dat5_paa5",
-					      "sdmmc4_dat6_paa6",
-					      "sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_i2c_scl_pz6 {
-				nvidia,pins = "pwr_i2c_scl_pz6",
-					      "pwr_i2c_sda_pz7";
-				nvidia,function = "i2cpwr";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			jtag_rtck {
-				nvidia,pins = "jtag_rtck";
-				nvidia,function = "rtck";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			clk_32k_in {
-				nvidia,pins = "clk_32k_in";
-				nvidia,function = "clk";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			core_pwr_req {
-				nvidia,pins = "core_pwr_req";
-				nvidia,function = "pwron";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			cpu_pwr_req {
-				nvidia,pins = "cpu_pwr_req";
-				nvidia,function = "cpu";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pwr_int_n {
-				nvidia,pins = "pwr_int_n";
-				nvidia,function = "pmi";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			reset_out_n {
-				nvidia,pins = "reset_out_n";
-				nvidia,function = "reset_out_n";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			clk3_out_pee0 {
-				nvidia,pins = "clk3_out_pee0";
-				nvidia,function = "extperiph3";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dap4_din_pp5 {
-				nvidia,pins = "dap4_din_pp5";
-				nvidia,function = "i2s3";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			dap4_dout_pp6 {
-				nvidia,pins = "dap4_dout_pp6",
-					      "dap4_fs_pp4",
-					      "dap4_sclk_pp7";
-				nvidia,function = "i2s3";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			gen1_i2c_sda_pc5 {
-				nvidia,pins = "gen1_i2c_sda_pc5",
-					      "gen1_i2c_scl_pc4";
-				nvidia,function = "i2c1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			uart2_cts_n_pj5 {
-				nvidia,pins = "uart2_cts_n_pj5";
-				nvidia,function = "uartb";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_rts_n_pj6 {
-				nvidia,pins = "uart2_rts_n_pj6";
-				nvidia,function = "uartb";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_rxd_pc3 {
-				nvidia,pins = "uart2_rxd_pc3";
-				nvidia,function = "irda";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			uart2_txd_pc2 {
-				nvidia,pins = "uart2_txd_pc2";
-				nvidia,function = "irda";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_cts_n_pa1 {
-				nvidia,pins = "uart3_cts_n_pa1",
-					      "uart3_rxd_pw7";
-				nvidia,function = "uartc";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			uart3_rts_n_pc0 {
-				nvidia,pins = "uart3_rts_n_pc0",
-					      "uart3_txd_pw6";
-				nvidia,function = "uartc";
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			hdmi_cec_pee3 {
-				nvidia,pins = "hdmi_cec_pee3";
-				nvidia,function = "cec";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-			};
-			hdmi_int_pn7 {
-				nvidia,pins = "hdmi_int_pn7";
-				nvidia,function = "rsvd1";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			ddc_scl_pv4 {
-				nvidia,pins = "ddc_scl_pv4",
-					      "ddc_sda_pv5";
-				nvidia,function = "i2c4";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
-			};
-			pj7 {
-				nvidia,pins = "pj7",
-					      "pk7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			pb0 {
-				nvidia,pins = "pb0",
-					      "pb1";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ph0 {
-				nvidia,pins = "ph0";
-				nvidia,function = "pwm0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row10_ps2 {
-				nvidia,pins = "kb_row10_ps2";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_row9_ps1 {
-				nvidia,pins = "kb_row9_ps1";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row6_pr6 {
-				nvidia,pins = "kb_row6_pr6";
-				nvidia,function = "displaya_alt";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			usb_vbus_en0_pn4 {
-				nvidia,pins = "usb_vbus_en0_pn4",
-					      "usb_vbus_en1_pn5";
-				nvidia,function = "usb";
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <32>;
-				nvidia,pull-up-strength = <42>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-			drive_sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <20>;
-				nvidia,pull-up-strength = <36>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-			drive_gma {
-				nvidia,pins = "drive_gma";
-				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <1>;
-				nvidia,pull-up-strength = <2>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,drive-type = <1>;
-			};
-			als_irq_l {
-				nvidia,pins = "gpio_x3_aud_px3";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			codec_irq_l {
-				nvidia,pins = "ph4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			lcd_bl_en {
-				nvidia,pins = "ph2";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			touch_irq_l {
-				nvidia,pins = "gpio_w3_aud_pw3";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			tpm_davint_l {
-				nvidia,pins = "ph6";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ts_irq_l {
-				nvidia,pins = "pk2";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			ts_reset_l {
-				nvidia,pins = "pk4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ts_shdn_l {
-				nvidia,pins = "pk1";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ph7 {
-				nvidia,pins = "ph7";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			kb_col0_ap {
-				nvidia,pins = "kb_col0_pq0";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			lid_open {
-				nvidia,pins = "kb_row4_pr4";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			en_vdd_sd {
-				nvidia,pins = "kb_row0_pr0";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			ac_ok {
-				nvidia,pins = "pj0";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			sensor_irq_l {
-				nvidia,pins = "pi6";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			wifi_en {
-				nvidia,pins = "gpio_x7_aud_px7";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-			};
-			wifi_rst_l {
-				nvidia,pins = "clk2_req_pcc5";
-				nvidia,function = "dap";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-			hp_det_l {
-				nvidia,pins = "ulpi_data1_po2";
-				nvidia,function = "spi3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-
-	serial@0,70006000 {
-		status = "okay";
-	};
-
-	pwm: pwm@0,7000a000 {
-		status = "okay";
-	};
-
-	i2c@0,7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		acodec: audio-codec@10 {
-			compatible = "maxim,max98090";
-			reg = <0x10>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	i2c@0,7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@0,7000c500 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	hdmi_ddc: i2c@0,7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@0,7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: pmic@40 {
-			compatible = "ams,as3722";
-			reg = <0x40>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ams,system-power-controller;
-
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&as3722_default>;
-
-			as3722_default: pinmux {
-				gpio0 {
-					pins = "gpio0";
-					function = "gpio";
-					bias-pull-down;
-				};
-
-				gpio1_2_4_7 {
-					pins = "gpio1", "gpio2", "gpio4", "gpio7";
-					function = "gpio";
-					bias-pull-up;
-				};
-
-				gpio3_6 {
-					pins = "gpio3", "gpio6";
-					bias-high-impedance;
-				};
-
-				gpio5 {
-					pins = "gpio5";
-					function = "clk32k-out";
-				};
-			};
-
-			regulators {
-				vsup-sd2-supply = <&vdd_5v0_sys>;
-				vsup-sd3-supply = <&vdd_5v0_sys>;
-				vsup-sd4-supply = <&vdd_5v0_sys>;
-				vsup-sd5-supply = <&vdd_5v0_sys>;
-				vin-ldo0-supply = <&vdd_1v35_lp0>;
-				vin-ldo1-6-supply = <&vdd_3v3_run>;
-				vin-ldo2-5-7-supply = <&vddio_1v8>;
-				vin-ldo3-4-supply = <&vdd_3v3_sys>;
-				vin-ldo9-10-supply = <&vdd_5v0_sys>;
-				vin-ldo11-supply = <&vdd_3v3_run>;
-
-				sd0 {
-					regulator-name = "+VDD_CPU_AP";
-					regulator-min-microvolt = <700000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-min-microamp = <3500000>;
-					regulator-max-microamp = <3500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					ams,ext-control = <2>;
-				};
-
-				sd1 {
-					regulator-name = "+VDD_CORE";
-					regulator-min-microvolt = <700000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-min-microamp = <2500000>;
-					regulator-max-microamp = <2500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					ams,ext-control = <1>;
-				};
-
-				vdd_1v35_lp0: sd2 {
-					regulator-name = "+1.35V_LP0(sd2)";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				sd3 {
-					regulator-name = "+1.35V_LP0(sd3)";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				vdd_1v05_run: sd4 {
-					regulator-name = "+1.05V_RUN";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				vddio_1v8: sd5 {
-					regulator-name = "+1.8V_VDDIO";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				sd6 {
-					regulator-name = "+VDD_GPU_AP";
-					regulator-min-microvolt = <650000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-min-microamp = <3500000>;
-					regulator-max-microamp = <3500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo0 {
-					regulator-name = "+1.05V_RUN_AVDD";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-boot-on;
-					regulator-always-on;
-					ams,ext-control = <1>;
-				};
-
-				ldo1 {
-					regulator-name = "+1.8V_RUN_CAM";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2 {
-					regulator-name = "+1.2V_GEN_AVDD";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo3 {
-					regulator-name = "+1.00V_LP0_VDD_RTC";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-boot-on;
-					regulator-always-on;
-					ams,enable-tracking;
-				};
-
-				vdd_run_cam: ldo4 {
-					regulator-name = "+3.3V_RUN_CAM";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo5 {
-					regulator-name = "+1.2V_RUN_CAM_FRONT";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				vddio_sdmmc3: ldo6 {
-					regulator-name = "+VDDIO_SDMMC3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo7 {
-					regulator-name = "+1.05V_RUN_CAM_REAR";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				ldo9 {
-					regulator-name = "+2.8V_RUN_TOUCH";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo10 {
-					regulator-name = "+2.8V_RUN_CAM_AF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo11 {
-					regulator-name = "+1.8V_RUN_VPP_FUSE";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-			};
-		};
-	};
-
-	spi@0,7000d400 {
-		status = "okay";
-
-		cros_ec: cros-ec@0 {
-			compatible = "google,cros-ec-spi";
-			spi-max-frequency = <4000000>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
-			reg = <0>;
-
-			google,cros-ec-spi-msg-delay = <2000>;
-
-			i2c-tunnel {
-				compatible = "google,cros-ec-i2c-tunnel";
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				google,remote-bus = <0>;
-
-				charger: bq24735@9 {
-					compatible = "ti,bq24735";
-					reg = <0x9>;
-					interrupt-parent = <&gpio>;
-					interrupts = <TEGRA_GPIO(J, 0)
-							GPIO_ACTIVE_HIGH>;
-					ti,ac-detect-gpios = <&gpio
-							TEGRA_GPIO(J, 0)
-							GPIO_ACTIVE_HIGH>;
-				};
-
-				battery: sbs-battery@b {
-					compatible = "sbs,sbs-battery";
-					reg = <0xb>;
-					sbs,i2c-retry-count = <2>;
-					sbs,poll-retry-count = <1>;
-				};
-			};
-		};
-	};
-
-	spi@0,7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spi-flash@0 {
-			compatible = "winbond,w25q32dw";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-
-	pmc@0,7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <500>;
-		nvidia,cpu-pwr-off-time = <300>;
-		nvidia,core-pwr-good-time = <641 3845>;
-		nvidia,core-pwr-off-time = <61036>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	hda@0,70030000 {
-		status = "okay";
-	};
-
-	sdhci@0,700b0400 {
-		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
-		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-		status = "okay";
-		bus-width = <4>;
-		vqmmc-supply = <&vddio_sdmmc3>;
-	};
-
-	sdhci@0,700b0600 {
-		status = "okay";
-		bus-width = <8>;
-	};
-
-	ahub@0,70300000 {
-		i2s@0,70301100 {
-			status = "okay";
-		};
-	};
-
-	usb@0,7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@0,7d000000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb1_vbus>;
-	};
-
-	usb@0,7d004000 {
-		status = "okay";
-	};
-
-	usb-phy@0,7d004000 {
-		status = "okay";
-		vbus-supply = <&vdd_run_cam>;
-	};
-
-	usb@0,7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@0,7d008000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb3_vbus>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_led>;
-		pwms = <&pwm 1 1000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		compatible = "lg,lp129qe", "simple-panel";
-
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+VDD_MUX";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+5V_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
-
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "+3.3V_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
-
-		vdd_3v3_run: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "+3.3V_RUN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_3v3_hdmi: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_run>;
-		};
-
-		vdd_led: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "+VDD_LED";
-			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_mux>;
-		};
-
-		vdd_5v0_ts: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "+5V_VDD_TS_SW";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_usb1_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "+5V_USB_HS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_usb3_vbus: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+5V_USB_SS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_3v3_panel: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "+3.3V_PANEL";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_run>;
-		};
-
-		vdd_3v3_lp0: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "+3.3V_LP0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			/*
-			 * TODO: find a way to wire this up with the USB EHCI
-			 * controllers so that it can be enabled on demand.
-			 */
-			regulator-always-on;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_hdmi_pll: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-			vin-supply = <&vdd_1v05_run>;
-		};
-
-		vdd_5v0_hdmi: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "+5V_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-max98090-venice2",
-			     "nvidia,tegra-audio-max98090";
-		nvidia,model = "NVIDIA Tegra Venice2";
-
-		nvidia,audio-routing =
-			"Headphones", "HPR",
-			"Headphones", "HPL",
-			"Speakers", "SPKR",
-			"Speakers", "SPKL",
-			"Mic Jack", "MICBIAS",
-			"IN34", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&acodec>;
-
-		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA124_CLK_EXTERN1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/tegra124.dtsi b/src/arm/tegra124.dtsi
deleted file mode 100644
index 03916efd6fa9..000000000000
--- a/src/arm/tegra124.dtsi
+++ /dev/null
@@ -1,799 +0,0 @@
-#include <dt-bindings/clock/tegra124-car.h>
-#include <dt-bindings/gpio/tegra-gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "nvidia,tegra124";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	host1x@0,50000000 {
-		compatible = "nvidia,tegra124-host1x", "simple-bus";
-		reg = <0x0 0x50000000 0x0 0x00034000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
-			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
-		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-
-		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
-
-		dc@0,54200000 {
-			compatible = "nvidia,tegra124-dc";
-			reg = <0x0 0x54200000 0x0 0x00040000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DISP1>,
-				 <&tegra_car TEGRA124_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			nvidia,head = <0>;
-		};
-
-		dc@0,54240000 {
-			compatible = "nvidia,tegra124-dc";
-			reg = <0x0 0x54240000 0x0 0x00040000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DISP2>,
-				 <&tegra_car TEGRA124_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			nvidia,head = <1>;
-		};
-
-		hdmi@0,54280000 {
-			compatible = "nvidia,tegra124-hdmi";
-			reg = <0x0 0x54280000 0x0 0x00040000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_HDMI>,
-				 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		sor@0,54540000 {
-			compatible = "nvidia,tegra124-sor";
-			reg = <0x0 0x54540000 0x0 0x00040000>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
-				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
-				 <&tegra_car TEGRA124_CLK_PLL_DP>,
-				 <&tegra_car TEGRA124_CLK_CLK_M>;
-			clock-names = "sor", "parent", "dp", "safe";
-			resets = <&tegra_car 182>;
-			reset-names = "sor";
-			status = "disabled";
-		};
-
-		dpaux@0,545c0000 {
-			compatible = "nvidia,tegra124-dpaux";
-			reg = <0x0 0x545c0000 0x0 0x00040000>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
-				 <&tegra_car TEGRA124_CLK_PLL_DP>;
-			clock-names = "dpaux", "parent";
-			resets = <&tegra_car 181>;
-			reset-names = "dpaux";
-			status = "disabled";
-		};
-	};
-
-	gic: interrupt-controller@0,50041000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x0 0x50041000 0x0 0x1000>,
-		      <0x0 0x50042000 0x0 0x1000>,
-		      <0x0 0x50044000 0x0 0x2000>,
-		      <0x0 0x50046000 0x0 0x2000>;
-		interrupts = <GIC_PPI 9
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	gpu@0,57000000 {
-		compatible = "nvidia,gk20a";
-		reg = <0x0 0x57000000 0x0 0x01000000>,
-		      <0x0 0x58000000 0x0 0x01000000>;
-		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "stall", "nonstall";
-		clocks = <&tegra_car TEGRA124_CLK_GPU>,
-			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
-		clock-names = "gpu", "pwr";
-		resets = <&tegra_car 184>;
-		reset-names = "gpu";
-		status = "disabled";
-	};
-
-	timer@0,60005000 {
-		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
-		reg = <0x0 0x60005000 0x0 0x400>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
-	};
-
-	tegra_car: clock@0,60006000 {
-		compatible = "nvidia,tegra124-car";
-		reg = <0x0 0x60006000 0x0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	gpio: gpio@0,6000d000 {
-		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
-		reg = <0x0 0x6000d000 0x0 0x1000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	apbdma: dma@0,60020000 {
-		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
-		reg = <0x0 0x60020000 0x0 0x1400>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_APBDMA>;
-		resets = <&tegra_car 34>;
-		reset-names = "dma";
-		#dma-cells = <1>;
-	};
-
-	apbmisc@0,70000800 {
-		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
-		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
-		      <0x0 0x7000E864 0x0 0x04>;   /* Strapping options */
-	};
-
-	pinmux: pinmux@0,70000868 {
-		compatible = "nvidia,tegra124-pinmux";
-		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
-		      <0x0 0x70003000 0x0 0x434>; /* Mux registers */
-	};
-
-	/*
-	 * There are two serial driver i.e. 8250 based simple serial
-	 * driver and APB DMA based serial driver for higher baudrate
-	 * and performace. To enable the 8250 based driver, the compatible
-	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
-	 * the APB DMA based serial driver, the comptible is
-	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
-	 */
-	serial@0,70006000 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x0 0x70006000 0x0 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
-		resets = <&tegra_car 6>;
-		reset-names = "serial";
-		dmas = <&apbdma 8>, <&apbdma 8>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	serial@0,70006040 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x0 0x70006040 0x0 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
-		resets = <&tegra_car 7>;
-		reset-names = "serial";
-		dmas = <&apbdma 9>, <&apbdma 9>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	serial@0,70006200 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x0 0x70006200 0x0 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
-		resets = <&tegra_car 55>;
-		reset-names = "serial";
-		dmas = <&apbdma 10>, <&apbdma 10>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	serial@0,70006300 {
-		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
-		reg = <0x0 0x70006300 0x0 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
-		resets = <&tegra_car 65>;
-		reset-names = "serial";
-		dmas = <&apbdma 19>, <&apbdma 19>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	pwm@0,7000a000 {
-		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
-		reg = <0x0 0x7000a000 0x0 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car TEGRA124_CLK_PWM>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-		status = "disabled";
-	};
-
-	i2c@0,7000c000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000c000 0x0 0x100>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C1>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 21>, <&apbdma 21>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@0,7000c400 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000c400 0x0 0x100>;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C2>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 54>;
-		reset-names = "i2c";
-		dmas = <&apbdma 22>, <&apbdma 22>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@0,7000c500 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000c500 0x0 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C3>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-		dmas = <&apbdma 23>, <&apbdma 23>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@0,7000c700 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000c700 0x0 0x100>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C4>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 103>;
-		reset-names = "i2c";
-		dmas = <&apbdma 26>, <&apbdma 26>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@0,7000d000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000d000 0x0 0x100>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C5>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 47>;
-		reset-names = "i2c";
-		dmas = <&apbdma 24>, <&apbdma 24>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@0,7000d100 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
-		reg = <0x0 0x7000d100 0x0 0x100>;
-		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_I2C6>;
-		clock-names = "div-clk";
-		resets = <&tegra_car 166>;
-		reset-names = "i2c";
-		dmas = <&apbdma 30>, <&apbdma 30>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000d400 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000d400 0x0 0x200>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC1>;
-		clock-names = "spi";
-		resets = <&tegra_car 41>;
-		reset-names = "spi";
-		dmas = <&apbdma 15>, <&apbdma 15>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000d600 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000d600 0x0 0x200>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC2>;
-		clock-names = "spi";
-		resets = <&tegra_car 44>;
-		reset-names = "spi";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000d800 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000d800 0x0 0x200>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC3>;
-		clock-names = "spi";
-		resets = <&tegra_car 46>;
-		reset-names = "spi";
-		dmas = <&apbdma 17>, <&apbdma 17>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000da00 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000da00 0x0 0x200>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC4>;
-		clock-names = "spi";
-		resets = <&tegra_car 68>;
-		reset-names = "spi";
-		dmas = <&apbdma 18>, <&apbdma 18>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000dc00 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000dc00 0x0 0x200>;
-		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC5>;
-		clock-names = "spi";
-		resets = <&tegra_car 104>;
-		reset-names = "spi";
-		dmas = <&apbdma 27>, <&apbdma 27>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@0,7000de00 {
-		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
-		reg = <0x0 0x7000de00 0x0 0x200>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA124_CLK_SBC6>;
-		clock-names = "spi";
-		resets = <&tegra_car 105>;
-		reset-names = "spi";
-		dmas = <&apbdma 28>, <&apbdma 28>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	rtc@0,7000e000 {
-		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
-		reg = <0x0 0x7000e000 0x0 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_RTC>;
-	};
-
-	pmc@0,7000e400 {
-		compatible = "nvidia,tegra124-pmc";
-		reg = <0x0 0x7000e400 0x0 0x400>;
-		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-	};
-
-	fuse@0,7000f800 {
-		compatible = "nvidia,tegra124-efuse";
-		reg = <0x0 0x7000f800 0x0 0x400>;
-		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-	hda@0,70030000 {
-		compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
-		reg = <0x0 0x70030000 0x0 0x10000>;
-		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_HDA>,
-		         <&tegra_car TEGRA124_CLK_HDA2HDMI>,
-			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
-		clock-names = "hda", "hda2hdmi", "hdacodec_2x";
-		resets = <&tegra_car 125>, /* hda */
-			 <&tegra_car 128>, /* hda2hdmi */
-			 <&tegra_car 111>; /* hda2codec_2x */
-		reset-names = "hda", "hda2hdmi", "hdacodec_2x";
-		status = "disabled";
-	};
-
-	padctl: padctl@0,7009f000 {
-		compatible = "nvidia,tegra124-xusb-padctl";
-		reg = <0x0 0x7009f000 0x0 0x1000>;
-		resets = <&tegra_car 142>;
-		reset-names = "padctl";
-
-		#phy-cells = <1>;
-	};
-
-	sdhci@0,700b0000 {
-		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x0 0x700b0000 0x0 0x200>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
-		resets = <&tegra_car 14>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@0,700b0200 {
-		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x0 0x700b0200 0x0 0x200>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
-		resets = <&tegra_car 9>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@0,700b0400 {
-		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x0 0x700b0400 0x0 0x200>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
-		resets = <&tegra_car 69>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@0,700b0600 {
-		compatible = "nvidia,tegra124-sdhci";
-		reg = <0x0 0x700b0600 0x0 0x200>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
-		resets = <&tegra_car 15>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	ahub@0,70300000 {
-		compatible = "nvidia,tegra124-ahub";
-		reg = <0x0 0x70300000 0x0 0x200>,
-		      <0x0 0x70300800 0x0 0x800>,
-		      <0x0 0x70300200 0x0 0x600>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
-			 <&tegra_car TEGRA124_CLK_APBIF>;
-		clock-names = "d_audio", "apbif";
-		resets = <&tegra_car 106>, /* d_audio */
-			 <&tegra_car 107>, /* apbif */
-			 <&tegra_car 30>,  /* i2s0 */
-			 <&tegra_car 11>,  /* i2s1 */
-			 <&tegra_car 18>,  /* i2s2 */
-			 <&tegra_car 101>, /* i2s3 */
-			 <&tegra_car 102>, /* i2s4 */
-			 <&tegra_car 108>, /* dam0 */
-			 <&tegra_car 109>, /* dam1 */
-			 <&tegra_car 110>, /* dam2 */
-			 <&tegra_car 10>,  /* spdif */
-			 <&tegra_car 153>, /* amx */
-			 <&tegra_car 185>, /* amx1 */
-			 <&tegra_car 154>, /* adx */
-			 <&tegra_car 180>, /* adx1 */
-			 <&tegra_car 186>, /* afc0 */
-			 <&tegra_car 187>, /* afc1 */
-			 <&tegra_car 188>, /* afc2 */
-			 <&tegra_car 189>, /* afc3 */
-			 <&tegra_car 190>, /* afc4 */
-			 <&tegra_car 191>; /* afc5 */
-		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
-			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
-			      "spdif", "amx", "amx1", "adx", "adx1",
-			      "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
-		dmas = <&apbdma 1>, <&apbdma 1>,
-		       <&apbdma 2>, <&apbdma 2>,
-		       <&apbdma 3>, <&apbdma 3>,
-		       <&apbdma 4>, <&apbdma 4>,
-		       <&apbdma 6>, <&apbdma 6>,
-		       <&apbdma 7>, <&apbdma 7>,
-		       <&apbdma 12>, <&apbdma 12>,
-		       <&apbdma 13>, <&apbdma 13>,
-		       <&apbdma 14>, <&apbdma 14>,
-		       <&apbdma 29>, <&apbdma 29>;
-		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
-			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
-			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
-			    "rx9", "tx9";
-		ranges;
-		#address-cells = <2>;
-		#size-cells = <2>;
-
-		tegra_i2s0: i2s@0,70301000 {
-			compatible = "nvidia,tegra124-i2s";
-			reg = <0x0 0x70301000 0x0 0x100>;
-			nvidia,ahub-cif-ids = <4 4>;
-			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
-			resets = <&tegra_car 30>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s1: i2s@0,70301100 {
-			compatible = "nvidia,tegra124-i2s";
-			reg = <0x0 0x70301100 0x0 0x100>;
-			nvidia,ahub-cif-ids = <5 5>;
-			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
-			resets = <&tegra_car 11>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s2: i2s@0,70301200 {
-			compatible = "nvidia,tegra124-i2s";
-			reg = <0x0 0x70301200 0x0 0x100>;
-			nvidia,ahub-cif-ids = <6 6>;
-			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
-			resets = <&tegra_car 18>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s3: i2s@0,70301300 {
-			compatible = "nvidia,tegra124-i2s";
-			reg = <0x0 0x70301300 0x0 0x100>;
-			nvidia,ahub-cif-ids = <7 7>;
-			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
-			resets = <&tegra_car 101>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s4: i2s@0,70301400 {
-			compatible = "nvidia,tegra124-i2s";
-			reg = <0x0 0x70301400 0x0 0x100>;
-			nvidia,ahub-cif-ids = <8 8>;
-			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
-			resets = <&tegra_car 102>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-	};
-
-	usb@0,7d000000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x0 0x7d000000 0x0 0x4000>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USBD>;
-		resets = <&tegra_car 22>;
-		reset-names = "usb";
-		nvidia,phy = <&phy1>;
-		status = "disabled";
-	};
-
-	phy1: usb-phy@0,7d000000 {
-		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
-		reg = <0x0 0x7d000000 0x0 0x4000>,
-		      <0x0 0x7d000000 0x0 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USBD>,
-			 <&tegra_car TEGRA124_CLK_PLL_U>,
-			 <&tegra_car TEGRA124_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 59>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <0>;
-		nvidia,xcvr-lsrslew = <3>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,xcvr-hsslew = <12>;
-		status = "disabled";
-	};
-
-	usb@0,7d004000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x0 0x7d004000 0x0 0x4000>;
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USB2>;
-		resets = <&tegra_car 58>;
-		reset-names = "usb";
-		nvidia,phy = <&phy2>;
-		status = "disabled";
-	};
-
-	phy2: usb-phy@0,7d004000 {
-		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
-		reg = <0x0 0x7d004000 0x0 0x4000>,
-		      <0x0 0x7d000000 0x0 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USB2>,
-			 <&tegra_car TEGRA124_CLK_PLL_U>,
-			 <&tegra_car TEGRA124_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 22>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <0>;
-		nvidia,xcvr-lsrslew = <3>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,xcvr-hsslew = <12>;
-		nvidia,has-utmi-pad-registers;
-		status = "disabled";
-	};
-
-	usb@0,7d008000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x0 0x7d008000 0x0 0x4000>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USB3>;
-		resets = <&tegra_car 59>;
-		reset-names = "usb";
-		nvidia,phy = <&phy3>;
-		status = "disabled";
-	};
-
-	phy3: usb-phy@0,7d008000 {
-		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
-		reg = <0x0 0x7d008000 0x0 0x4000>,
-		      <0x0 0x7d000000 0x0 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA124_CLK_USB3>,
-			 <&tegra_car TEGRA124_CLK_PLL_U>,
-			 <&tegra_car TEGRA124_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 58>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <0>;
-		nvidia,xcvr-lsrslew = <3>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,xcvr-hsslew = <12>;
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10
-				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-};
diff --git a/src/arm/tegra20-colibri-512.dtsi b/src/arm/tegra20-colibri-512.dtsi
deleted file mode 100644
index 8e0066ad9628..000000000000
--- a/src/arm/tegra20-colibri-512.dtsi
+++ /dev/null
@@ -1,533 +0,0 @@
-#include "tegra20.dtsi"
-
-/ {
-	model = "Toradex Colibri T20 512MB";
-	compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&i2c_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			audio_refclk {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			crt {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			displaya {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3",
-					"ld4", "ld5", "ld6", "ld7", "ld8",
-					"ld9", "ld10", "ld11", "ld12", "ld13",
-					"ld14", "ld15", "ld16", "ld17",
-					"lhs", "lpw0", "lpw2", "lsc0",
-					"lsc1", "lsck", "lsda", "lspi", "lvs";
-				nvidia,function = "displaya";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			gpio_dte {
-				nvidia,pins = "dte";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_gmi {
-				nvidia,pins = "ata", "atc", "atd", "ate",
-					"dap1", "dap2", "dap4", "gpu", "irrx",
-					"irtx", "spia", "spib", "spic";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			gpio_uac {
-				nvidia,pins = "uac";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			i2c1 {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			i2c3 {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			i2cddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			irda {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			nand {
-				nvidia,pins = "kbca", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "nand";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			owc {
-				nvidia,pins = "owc";
-				nvidia,function = "owr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pwm {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "pwm";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			sdio4 {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			spi1 {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			spi4 {
-				nvidia,pins = "slxa", "slxc", "slxd", "slxk";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			uarta {
-				nvidia,pins = "sdio1";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			uartd {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			ulpi {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			ulpi_refclk {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			usb_gpio {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			vi {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,function = "vi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			vi_sc {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-
-	ac97: ac97@70002000 {
-		status = "okay";
-		nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_HIGH>;
-		nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
-			GPIO_ACTIVE_HIGH>;
-	};
-
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-	};
-
-	i2c_ddc: i2c@7000c400 {
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_3v3_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&vdd_3v3_reg>;
-			vinldo4-supply = <&vdd_3v3_reg>;
-			vinldo678-supply = <&vdd_3v3_reg>;
-			vinldo9-supply = <&vdd_3v3_reg>;
-
-			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				sys_reg: regulator@0 {
-					reg = <0>;
-					regulator-compatible = "sys";
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				regulator@1 {
-					reg = <1>;
-					regulator-compatible = "sm0";
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				regulator@2 {
-					reg = <2>;
-					regulator-compatible = "sm1";
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: regulator@3 {
-					reg = <3>;
-					regulator-compatible = "sm2";
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				regulator@5 {
-					reg = <5>;
-					regulator-compatible = "ldo1";
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				regulator@6 {
-					reg = <6>;
-					regulator-compatible = "ldo2";
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				/* LDO3 is not connected to anything */
-
-				regulator@8 {
-					reg = <8>;
-					regulator-compatible = "ldo4";
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: regulator@9 {
-					reg = <9>;
-					regulator-compatible = "ldo5";
-					regulator-name = "vdd_ldo5,vdd_fuse";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				regulator@10 {
-					reg = <10>;
-					regulator-compatible = "ldo6";
-					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-
-				hdmi_vdd_reg: regulator@11 {
-					reg = <11>;
-					regulator-compatible = "ldo7";
-					regulator-name = "vdd_ldo7,avdd_hdmi";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: regulator@12 {
-					reg = <12>;
-					regulator-compatible = "ldo8";
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				regulator@13 {
-					reg = <13>;
-					regulator-compatible = "ldo9";
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				regulator@14 {
-					reg = <14>;
-					regulator-compatible = "ldo_rtc";
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "national,lm95245";
-			reg = <0x4c>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <3875>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	memory-controller@7000f400 {
-		emc-table@83250 {
-			reg = <83250>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <83250>;
-			nvidia,emc-registers =   <0x00000005 0x00000011
-				0x00000004 0x00000002 0x00000004 0x00000004
-				0x00000001 0x0000000a 0x00000002 0x00000002
-				0x00000001 0x00000001 0x00000003 0x00000004
-				0x00000003 0x00000009 0x0000000c 0x0000025f
-				0x00000000 0x00000003 0x00000003 0x00000002
-				0x00000002 0x00000001 0x00000008 0x000000c8
-				0x00000003 0x00000005 0x00000003 0x0000000c
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0x00520006
-				0x00000010 0x00000008 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-		emc-table@133200 {
-			reg = <133200>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <133200>;
-			nvidia,emc-registers =   <0x00000008 0x00000019
-				0x00000006 0x00000002 0x00000004 0x00000004
-				0x00000001 0x0000000a 0x00000002 0x00000002
-				0x00000002 0x00000001 0x00000003 0x00000004
-				0x00000003 0x00000009 0x0000000c 0x0000039f
-				0x00000000 0x00000003 0x00000003 0x00000002
-				0x00000002 0x00000001 0x00000008 0x000000c8
-				0x00000003 0x00000007 0x00000003 0x0000000c
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0x00510006
-				0x00000010 0x00000008 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-		emc-table@166500 {
-			reg = <166500>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <166500>;
-			nvidia,emc-registers =   <0x0000000a 0x00000021
-				0x00000008 0x00000003 0x00000004 0x00000004
-				0x00000002 0x0000000a 0x00000003 0x00000003
-				0x00000002 0x00000001 0x00000003 0x00000004
-				0x00000003 0x00000009 0x0000000c 0x000004df
-				0x00000000 0x00000003 0x00000003 0x00000003
-				0x00000003 0x00000001 0x00000009 0x000000c8
-				0x00000003 0x00000009 0x00000004 0x0000000c
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0x004f0006
-				0x00000010 0x00000008 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-		emc-table@333000 {
-			reg = <333000>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <333000>;
-			nvidia,emc-registers =   <0x00000014 0x00000041
-				0x0000000f 0x00000005 0x00000004 0x00000005
-				0x00000003 0x0000000a 0x00000005 0x00000005
-				0x00000004 0x00000001 0x00000003 0x00000004
-				0x00000003 0x00000009 0x0000000c 0x000009ff
-				0x00000000 0x00000003 0x00000003 0x00000005
-				0x00000005 0x00000001 0x0000000e 0x000000c8
-				0x00000003 0x00000011 0x00000006 0x0000000c
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0x00380006
-				0x00000010 0x00000008 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	sdhci@c8000600 {
-		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_3v3_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vdd_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "internal_usb";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
-			         "nvidia,tegra-audio-wm9712";
-		nvidia,model = "Colibri T20 AC97 Audio";
-
-		nvidia,audio-routing =
-			"Headphone", "HPOUTL",
-			"Headphone", "HPOUTR",
-			"LineIn", "LINEINL",
-			"LineIn", "LINEINR",
-			"Mic", "MIC1";
-
-		nvidia,ac97-controller = <&ac97>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-harmony.dts b/src/arm/tegra20-harmony.dts
deleted file mode 100644
index a37279af687c..000000000000
--- a/src/arm/tegra20-harmony.dts
+++ /dev/null
@@ -1,776 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Tegra20 Harmony evaluation board";
-	compatible = "nvidia,harmony", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				nvidia,panel = <&panel>;
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			hdmi-supply = <&vdd_5v0_hdmi>;
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
-					"spia", "spib", "spic";
-				nvidia,function = "gmi";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			dta {
-				nvidia,pins = "dta", "dtd";
-				nvidia,function = "sdio2";
-			};
-			dtb {
-				nvidia,pins = "dtb", "dtc", "dte";
-				nvidia,function = "rsvd1";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint", "pta";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uarta";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
-					"ld3", "ld4", "ld5", "ld6", "ld7",
-					"ld8", "ld9", "ld10", "ld11", "ld12",
-					"ld13", "ld14", "ld15", "ld16", "ld17",
-					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
-					"lhs", "lm0", "lm1", "lpp", "lpw0",
-					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
-					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
-					"lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "pwm";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxc {
-				nvidia,pins = "slxc", "slxd";
-				nvidia,function = "spdif";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
-					"gpv", "i2cp", "pta", "rm", "slxa",
-					"slxk", "spia", "spib", "uac";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_csus {
-				nvidia,pins = "csus", "spid", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
-					"slxc", "slxd", "spdi", "spdo", "spig",
-					"uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ddc {
-				nvidia,pins = "ddc", "dta", "dtd", "kbca",
-					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"sdc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
-					"lvp0", "owc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "sdd", "spic",
-					"spie", "spih", "uaa", "uab", "uad",
-					"uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
-					"lvs", "pmc";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-		};
-	};
-
-	hdmi_ddc: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_5v0_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				sm0 {
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				sm1 {
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				pci_clk_reg: ldo0 {
-					regulator-name = "vdd_ldo0,vddio_pex_clk";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "adi,adt7461";
-			reg = <0x4c>;
-		};
-	};
-
-	kbc@7000e200 {
-		status = "okay";
-		nvidia,debounce-delay-ms = <2>;
-		nvidia,repeat-delay-ms = <160>;
-		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
-		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
-		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
-				MATRIX_KEY(0x00, 0x03, KEY_S)
-				MATRIX_KEY(0x00, 0x04, KEY_A)
-				MATRIX_KEY(0x00, 0x05, KEY_Z)
-				MATRIX_KEY(0x00, 0x07, KEY_FN)
-				MATRIX_KEY(0x01, 0x07, KEY_MENU)
-				MATRIX_KEY(0x02, 0x06, KEY_LEFTALT)
-				MATRIX_KEY(0x02, 0x07, KEY_RIGHTALT)
-				MATRIX_KEY(0x03, 0x00, KEY_5)
-				MATRIX_KEY(0x03, 0x01, KEY_4)
-				MATRIX_KEY(0x03, 0x02, KEY_R)
-				MATRIX_KEY(0x03, 0x03, KEY_E)
-				MATRIX_KEY(0x03, 0x04, KEY_F)
-				MATRIX_KEY(0x03, 0x05, KEY_D)
-				MATRIX_KEY(0x03, 0x06, KEY_X)
-				MATRIX_KEY(0x04, 0x00, KEY_7)
-				MATRIX_KEY(0x04, 0x01, KEY_6)
-				MATRIX_KEY(0x04, 0x02, KEY_T)
-				MATRIX_KEY(0x04, 0x03, KEY_H)
-				MATRIX_KEY(0x04, 0x04, KEY_G)
-				MATRIX_KEY(0x04, 0x05, KEY_V)
-				MATRIX_KEY(0x04, 0x06, KEY_C)
-				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
-				MATRIX_KEY(0x05, 0x00, KEY_9)
-				MATRIX_KEY(0x05, 0x01, KEY_8)
-				MATRIX_KEY(0x05, 0x02, KEY_U)
-				MATRIX_KEY(0x05, 0x03, KEY_Y)
-				MATRIX_KEY(0x05, 0x04, KEY_J)
-				MATRIX_KEY(0x05, 0x05, KEY_N)
-				MATRIX_KEY(0x05, 0x06, KEY_B)
-				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
-				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
-				MATRIX_KEY(0x06, 0x01, KEY_0)
-				MATRIX_KEY(0x06, 0x02, KEY_O)
-				MATRIX_KEY(0x06, 0x03, KEY_I)
-				MATRIX_KEY(0x06, 0x04, KEY_L)
-				MATRIX_KEY(0x06, 0x05, KEY_K)
-				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
-				MATRIX_KEY(0x06, 0x07, KEY_M)
-				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
-				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
-				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
-				MATRIX_KEY(0x07, 0x07, KEY_MENU)
-				MATRIX_KEY(0x08, 0x04, KEY_LEFTSHIFT)
-				MATRIX_KEY(0x08, 0x05, KEY_RIGHTSHIFT)
-				MATRIX_KEY(0x09, 0x05, KEY_LEFTCTRL)
-				MATRIX_KEY(0x09, 0x07, KEY_RIGHTCTRL)
-				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
-				MATRIX_KEY(0x0B, 0x01, KEY_P)
-				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
-				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
-				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
-				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
-				MATRIX_KEY(0x0C, 0x00, KEY_F10)
-				MATRIX_KEY(0x0C, 0x01, KEY_F9)
-				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
-				MATRIX_KEY(0x0C, 0x03, KEY_3)
-				MATRIX_KEY(0x0C, 0x04, KEY_2)
-				MATRIX_KEY(0x0C, 0x05, KEY_UP)
-				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
-				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
-				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
-				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
-				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
-				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
-				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
-				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
-				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
-				MATRIX_KEY(0x0E, 0x00, KEY_F11)
-				MATRIX_KEY(0x0E, 0x01, KEY_F12)
-				MATRIX_KEY(0x0E, 0x02, KEY_F8)
-				MATRIX_KEY(0x0E, 0x03, KEY_Q)
-				MATRIX_KEY(0x0E, 0x04, KEY_F4)
-				MATRIX_KEY(0x0E, 0x05, KEY_F3)
-				MATRIX_KEY(0x0E, 0x06, KEY_1)
-				MATRIX_KEY(0x0E, 0x07, KEY_F7)
-				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
-				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
-				MATRIX_KEY(0x0F, 0x02, KEY_F5)
-				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
-				MATRIX_KEY(0x0F, 0x04, KEY_F1)
-				MATRIX_KEY(0x0F, 0x05, KEY_F2)
-				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
-				MATRIX_KEY(0x0F, 0x07, KEY_F6)
-				MATRIX_KEY(0x14, 0x00, KEY_KP7)
-				MATRIX_KEY(0x15, 0x00, KEY_KP9)
-				MATRIX_KEY(0x15, 0x01, KEY_KP8)
-				MATRIX_KEY(0x15, 0x02, KEY_KP4)
-				MATRIX_KEY(0x15, 0x04, KEY_KP1)
-				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
-				MATRIX_KEY(0x16, 0x02, KEY_KP6)
-				MATRIX_KEY(0x16, 0x03, KEY_KP5)
-				MATRIX_KEY(0x16, 0x04, KEY_KP3)
-				MATRIX_KEY(0x16, 0x05, KEY_KP2)
-				MATRIX_KEY(0x16, 0x07, KEY_KP0)
-				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
-				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
-				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
-				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
-				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
-				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
-				MATRIX_KEY(0x1D, 0x04, KEY_END)
-				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSUP)
-				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
-				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSDOWN)
-				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
-				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
-				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
-				MATRIX_KEY(0x1F, 0x04, KEY_QUESTION)>;
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <3875>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	pcie-controller@80003000 {
-		status = "okay";
-
-		avdd-pex-supply = <&pci_vdd_reg>;
-		vdd-pex-supply = <&pci_vdd_reg>;
-		avdd-pex-pll-supply = <&pci_vdd_reg>;
-		avdd-plle-supply = <&pci_vdd_reg>;
-		vddio-pex-clk-supply = <&pci_clk_reg>;
-
-		pci@1,0 {
-			status = "okay";
-		};
-
-		pci@2,0 {
-			status = "okay";
-		};
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000200 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		bus-width = <8>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_bl_reg>;
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		compatible = "auo,b101aw03", "simple-panel";
-
-		power-supply = <&vdd_pnl_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		pci_vdd_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_1v05";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_pnl_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_pnl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_bl_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_5v0_hdmi: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "VDDIO_HDMI";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-harmony",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Harmony";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
-		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
-			GPIO_ACTIVE_HIGH>;
-		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
-			GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-iris-512.dts b/src/arm/tegra20-iris-512.dts
deleted file mode 100644
index 8cfb83f42e1f..000000000000
--- a/src/arm/tegra20-iris-512.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/dts-v1/;
-
-#include "tegra20-colibri-512.dtsi"
-
-/ {
-	model = "Toradex Colibri T20 512MB on Iris";
-	compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	pinmux@70000014 {
-		state_default: pinmux {
-			hdint {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			i2cddc {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			sdio4 {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			uarta {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			uartd {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	i2c_ddc: i2c@7000c400 {
-		status = "okay";
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <4>;
-		vmmc-supply = <&vcc_sd_reg>;
-		vqmmc-supply = <&vcc_sd_reg>;
-	};
-
-	regulators {
-		regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_host_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-		};
-
-		vcc_sd_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vcc_sd";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra20-medcom-wide.dts b/src/arm/tegra20-medcom-wide.dts
deleted file mode 100644
index 1b7c56b33aca..000000000000
--- a/src/arm/tegra20-medcom-wide.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-/dts-v1/;
-
-#include "tegra20-tamonten.dtsi"
-
-/ {
-	model = "Avionic Design Medcom-Wide board";
-	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-				nvidia,panel = <&panel>;
-			};
-		};
-	};
-
-	i2c@7000c000 {
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff
-				    0xffffffff
-				    0
-				    0xffffffff
-				    0xffffffff>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	panel: panel {
-		compatible = "innolux,n156bge-l21", "simple-panel";
-
-		power-supply =  <&vdd_1v8_reg>, <&vdd_3v3_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-	};
-
-	sound {
-		compatible = "ad,tegra-audio-wm8903-medcom-wide",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Avionic Design Medcom-Wide";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	regulators {
-		vcc_24v_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vcc_24v";
-			regulator-min-microvolt = <24000000>;
-			regulator-max-microvolt = <24000000>;
-			regulator-always-on;
-		};
-
-		vdd_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "vdd_5v0";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vdd_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "vdd_3v3";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vdd_1v8_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "vdd_1v8";
-			vin-supply = <&vdd_3v3_reg>;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra20-paz00.dts b/src/arm/tegra20-paz00.dts
deleted file mode 100644
index d4438e30de45..000000000000
--- a/src/arm/tegra20-paz00.dts
+++ /dev/null
@@ -1,596 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "Toshiba AC100 / Dynabook AZ";
-	compatible = "compal,paz00", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				nvidia,panel = <&panel>;
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata", "atc", "atd", "ate",
-					"dap2", "gmb", "gmc", "gmd", "spia",
-					"spib", "spic", "spid", "spie";
-				nvidia,function = "gmi";
-			};
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "pllc_out1";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "rsvd1";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gpu {
-				nvidia,pins = "gpu", "sdb", "sdd";
-				nvidia,function = "pwm";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint", "pta";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uarta";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			kbcb {
-				nvidia,pins = "kbcb", "kbcd";
-				nvidia,function = "sdio2";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
-					"ld3", "ld4", "ld5", "ld6", "ld7",
-					"ld8", "ld9", "ld10", "ld11", "ld12",
-					"ld13", "ld14", "ld15", "ld16", "ld17",
-					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
-					"lhs", "lm0", "lm1", "lpp", "lpw0",
-					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
-					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
-					"lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc";
-				nvidia,function = "owr";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdc {
-				nvidia,pins = "sdc";
-				nvidia,function = "twc";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxc {
-				nvidia,pins = "slxc", "slxd";
-				nvidia,function = "spi4";
-			};
-			spdi {
-				nvidia,pins = "spdi", "spdo";
-				nvidia,function = "rsvd2";
-			};
-			spif {
-				nvidia,pins = "spif", "uac";
-				nvidia,function = "rsvd4";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "spdif";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dap2", "dtf",
-					"gma", "gmb", "gmc", "gmd", "gme",
-					"gpu", "gpu7", "gpv", "i2cp", "pta",
-					"rm", "sdio1", "slxk", "spdo", "uac",
-					"uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp", "dap3", "dap4", "dtb",
-					"dtc", "dte", "slxa", "slxc", "slxd",
-					"spdi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_csus {
-				nvidia,pins = "csus", "spia", "spib", "spid",
-					"spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ddc {
-				nvidia,pins = "ddc", "irrx", "irtx", "kbca",
-					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"spic", "spig", "uaa", "uab";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_dta {
-				nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
-					"spie", "spih", "uad", "uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "ld0", "ld1", "ld2",
-					"ld3", "ld4", "ld5", "ld6", "ld7",
-					"ld8", "ld9", "ld10", "ld11", "ld12",
-					"ld13", "ld14", "ld15", "ld16", "ld17",
-					"ldc", "ldi", "lhs", "lsc0", "lspi",
-					"lvs", "pmc";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_lcsn {
-				nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
-					"lm0", "lm1", "lpp", "lpw0", "lpw1",
-					"lpw2", "lsc1", "lsck", "lsda", "lsdi",
-					"lvp0", "lvp1", "sdb";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006200 {
-		status = "okay";
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
-	lvds_ddc: i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		alc5632: alc5632@1e {
-			compatible = "realtek,alc5632";
-			reg = <0x1e>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-
-	hdmi_ddc: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	nvec@7000c500 {
-		compatible = "nvidia,nvec";
-		reg = <0x7000c500 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <80000>;
-		request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
-		slave-addr = <138>;
-		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
-		         <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&p5valw_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				sm0 {
-					regulator-name = "+1.2vs_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				sm1 {
-					regulator-name = "+1.0vs_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "+3.7vs_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				ldo1 {
-					regulator-name = "+1.1vs_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "+1.2vs_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo3 {
-					regulator-name = "+3.3vs_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "+2.85vs_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					/*
-					 * Research indicates this should be
-					 * 1.8v; other boards that use this
-					 * rail for the same purpose need it
-					 * set to 1.8v. The schematic signal
-					 * name is incorrect; perhaps copied
-					 * from an incorrect NVIDIA reference.
-					 */
-					regulator-name = "+2.85vs_ldo6,avdd_vdac";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "+3.3vs_rtc";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		adt7461@4c {
-			compatible = "adi,adt7461";
-			reg = <0x4c>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <0>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <0>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000000 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
-		default-brightness-level = <10>;
-
-		backlight-boot-off;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		wifi {
-			label = "wifi-led";
-			gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "rfkill0";
-		};
-	};
-
-	panel: panel {
-		compatible = "samsung,ltn101nt05", "simple-panel";
-
-		ddc-i2c-bus = <&lvds_ddc>;
-		power-supply = <&vdd_pnl_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		p5valw_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+5valw";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vdd_pnl_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+3VS,vdd_pnl";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-alc5632-paz00",
-			"nvidia,tegra-audio-alc5632";
-
-		nvidia,model = "Compal PAZ00";
-
-		nvidia,audio-routing =
-			"Int Spk", "SPKOUT",
-			"Int Spk", "SPKOUTN",
-			"Headset Mic", "MICBIAS1",
-			"MIC1", "Headset Mic",
-			"Headset Stereophone", "HPR",
-			"Headset Stereophone", "HPL",
-			"DMICDAT", "Digital Mic";
-
-		nvidia,audio-codec = <&alc5632>;
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-		         <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-		         <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-plutux.dts b/src/arm/tegra20-plutux.dts
deleted file mode 100644
index a10b415bbdee..000000000000
--- a/src/arm/tegra20-plutux.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/dts-v1/;
-
-#include "tegra20-tamonten.dtsi"
-
-/ {
-	model = "Avionic Design Plutux board";
-	compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	i2c@7000c000 {
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff
-				    0xffffffff
-				    0
-				    0xffffffff
-				    0xffffffff>;
-		};
-	};
-
-	sound {
-		compatible = "ad,tegra-audio-plutux",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Avionic Design Plutux";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	regulators {
-		vcc_24v_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vcc_24v";
-			regulator-min-microvolt = <24000000>;
-			regulator-max-microvolt = <24000000>;
-			regulator-always-on;
-		};
-
-		vdd_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "vdd_5v0";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vdd_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "vdd_3v3";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vdd_1v8_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "vdd_1v8";
-			vin-supply = <&vdd_3v3_reg>;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra20-seaboard.dts b/src/arm/tegra20-seaboard.dts
deleted file mode 100644
index a1d4bf9895d7..000000000000
--- a/src/arm/tegra20-seaboard.dts
+++ /dev/null
@@ -1,923 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Seaboard";
-	compatible = "nvidia,seaboard", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				nvidia,panel = <&panel>;
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "spia",
-					"spib", "spic";
-				nvidia,function = "gmi";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp", "lm1";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "vi";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-			gmd {
-				nvidia,pins = "gmd";
-				nvidia,function = "sflash";
-			};
-			gpu {
-				nvidia,pins = "gpu";
-				nvidia,function = "pwm";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1",
-					"lsck", "lsda";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
-					"lsdi", "lvp0";
-				nvidia,function = "rsvd4";
-			};
-			ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lpp", "lsc0",
-					"lspi", "lvp1", "lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "sdio3";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxc {
-				nvidia,pins = "slxc", "slxd";
-				nvidia,function = "spdif";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd",
-					"cdev1", "cdev2", "dap1", "dap2",
-					"dap4", "ddc", "dtf", "gma", "gmc", "gmd",
-					"gme", "gpu", "gpu7", "i2cp", "irrx",
-					"irtx", "pta", "rm", "sdc", "sdd",
-					"slxd", "slxk", "spdi", "spdo", "uac",
-					"uad", "uca", "ucb", "uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ate {
-				nvidia,pins = "ate", "csus", "dap3",
-					"gpv", "owc", "slxc", "spib", "spid",
-					"spie";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp", "gmb", "slxa", "spia",
-					"spig", "spih";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_dte {
-				nvidia,pins = "dte", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
-					"lvp0";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf", "sdio1", "spic", "uaa",
-					"uab";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
-					"lvs", "pmc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <31>;
-				nvidia,pull-up-strength = <31>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-			};
-		};
-
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_pta: pinmux_i2cmux_pta {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
-			};
-		};
-
-		state_i2cmux_idle: pinmux_i2cmux_idle {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-		};
-
-		/* ALS and proximity sensor */
-		isl29018@44 {
-			compatible = "isil,isl29018";
-			reg = <0x44>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		gyrometer@68 {
-			compatible = "invn,mpu3050";
-			reg = <0x68>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			smart-battery@b {
-				compatible = "ti,bq20z75", "smart-battery-1.1";
-				reg = <0xb>;
-				ti,i2c-retry-count = <2>;
-				ti,poll-retry-count = <10>;
-			};
-		};
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		magnetometer@c {
-			compatible = "ak,ak8975";
-			reg = <0xc>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_5v0_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				sm0 {
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-				};
-
-				sm1 {
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <1125000>;
-					regulator-max-microvolt = <1125000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-		};
-	};
-
-	kbc@7000e200 {
-		status = "okay";
-		nvidia,debounce-delay-ms = <32>;
-		nvidia,repeat-delay-ms = <160>;
-		nvidia,ghost-filter;
-		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
-		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
-		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
-				MATRIX_KEY(0x00, 0x03, KEY_S)
-				MATRIX_KEY(0x00, 0x04, KEY_A)
-				MATRIX_KEY(0x00, 0x05, KEY_Z)
-				MATRIX_KEY(0x00, 0x07, KEY_FN)
-
-				MATRIX_KEY(0x01, 0x07, KEY_LEFTMETA)
-				MATRIX_KEY(0x02, 0x06, KEY_RIGHTALT)
-				MATRIX_KEY(0x02, 0x07, KEY_LEFTALT)
-
-				MATRIX_KEY(0x03, 0x00, KEY_5)
-				MATRIX_KEY(0x03, 0x01, KEY_4)
-				MATRIX_KEY(0x03, 0x02, KEY_R)
-				MATRIX_KEY(0x03, 0x03, KEY_E)
-				MATRIX_KEY(0x03, 0x04, KEY_F)
-				MATRIX_KEY(0x03, 0x05, KEY_D)
-				MATRIX_KEY(0x03, 0x06, KEY_X)
-
-				MATRIX_KEY(0x04, 0x00, KEY_7)
-				MATRIX_KEY(0x04, 0x01, KEY_6)
-				MATRIX_KEY(0x04, 0x02, KEY_T)
-				MATRIX_KEY(0x04, 0x03, KEY_H)
-				MATRIX_KEY(0x04, 0x04, KEY_G)
-				MATRIX_KEY(0x04, 0x05, KEY_V)
-				MATRIX_KEY(0x04, 0x06, KEY_C)
-				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
-
-				MATRIX_KEY(0x05, 0x00, KEY_9)
-				MATRIX_KEY(0x05, 0x01, KEY_8)
-				MATRIX_KEY(0x05, 0x02, KEY_U)
-				MATRIX_KEY(0x05, 0x03, KEY_Y)
-				MATRIX_KEY(0x05, 0x04, KEY_J)
-				MATRIX_KEY(0x05, 0x05, KEY_N)
-				MATRIX_KEY(0x05, 0x06, KEY_B)
-				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
-
-				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
-				MATRIX_KEY(0x06, 0x01, KEY_0)
-				MATRIX_KEY(0x06, 0x02, KEY_O)
-				MATRIX_KEY(0x06, 0x03, KEY_I)
-				MATRIX_KEY(0x06, 0x04, KEY_L)
-				MATRIX_KEY(0x06, 0x05, KEY_K)
-				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
-				MATRIX_KEY(0x06, 0x07, KEY_M)
-
-				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
-				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
-				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
-				MATRIX_KEY(0x07, 0x07, KEY_MENU)
-
-				MATRIX_KEY(0x08, 0x04, KEY_RIGHTSHIFT)
-				MATRIX_KEY(0x08, 0x05, KEY_LEFTSHIFT)
-
-				MATRIX_KEY(0x09, 0x05, KEY_RIGHTCTRL)
-				MATRIX_KEY(0x09, 0x07, KEY_LEFTCTRL)
-
-				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
-				MATRIX_KEY(0x0B, 0x01, KEY_P)
-				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
-				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
-				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
-				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
-
-				MATRIX_KEY(0x0C, 0x00, KEY_F10)
-				MATRIX_KEY(0x0C, 0x01, KEY_F9)
-				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
-				MATRIX_KEY(0x0C, 0x03, KEY_3)
-				MATRIX_KEY(0x0C, 0x04, KEY_2)
-				MATRIX_KEY(0x0C, 0x05, KEY_UP)
-				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
-				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
-
-				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
-				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
-				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
-				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
-				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
-				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
-				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
-
-				MATRIX_KEY(0x0E, 0x00, KEY_F11)
-				MATRIX_KEY(0x0E, 0x01, KEY_F12)
-				MATRIX_KEY(0x0E, 0x02, KEY_F8)
-				MATRIX_KEY(0x0E, 0x03, KEY_Q)
-				MATRIX_KEY(0x0E, 0x04, KEY_F4)
-				MATRIX_KEY(0x0E, 0x05, KEY_F3)
-				MATRIX_KEY(0x0E, 0x06, KEY_1)
-				MATRIX_KEY(0x0E, 0x07, KEY_F7)
-
-				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
-				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
-				MATRIX_KEY(0x0F, 0x02, KEY_F5)
-				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
-				MATRIX_KEY(0x0F, 0x04, KEY_F1)
-				MATRIX_KEY(0x0F, 0x05, KEY_F2)
-				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
-				MATRIX_KEY(0x0F, 0x07, KEY_F6)
-
-				/* Software Handled Function Keys */
-				MATRIX_KEY(0x14, 0x00, KEY_KP7)
-
-				MATRIX_KEY(0x15, 0x00, KEY_KP9)
-				MATRIX_KEY(0x15, 0x01, KEY_KP8)
-				MATRIX_KEY(0x15, 0x02, KEY_KP4)
-				MATRIX_KEY(0x15, 0x04, KEY_KP1)
-
-				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
-				MATRIX_KEY(0x16, 0x02, KEY_KP6)
-				MATRIX_KEY(0x16, 0x03, KEY_KP5)
-				MATRIX_KEY(0x16, 0x04, KEY_KP3)
-				MATRIX_KEY(0x16, 0x05, KEY_KP2)
-				MATRIX_KEY(0x16, 0x07, KEY_KP0)
-
-				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
-				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
-				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
-				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
-
-				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
-
-				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
-				MATRIX_KEY(0x1D, 0x04, KEY_END)
-				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSDOWN)
-				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
-				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSUP)
-
-				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
-				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
-				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
-
-				MATRIX_KEY(0x1F, 0x04, KEY_HELP)>;
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <3875>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	memory-controller@7000f400 {
-		emc-table@190000 {
-			reg = <190000>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <190000>;
-			nvidia,emc-registers = <0x0000000c 0x00000026
-				0x00000009 0x00000003 0x00000004 0x00000004
-				0x00000002 0x0000000c 0x00000003 0x00000003
-				0x00000002 0x00000001 0x00000004 0x00000005
-				0x00000004 0x00000009 0x0000000d 0x0000059f
-				0x00000000 0x00000003 0x00000003 0x00000003
-				0x00000003 0x00000001 0x0000000b 0x000000c8
-				0x00000003 0x00000007 0x00000004 0x0000000f
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0xa06204ae
-				0x007dc010 0x00000000 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-
-		emc-table@380000 {
-			reg = <380000>;
-			compatible = "nvidia,tegra20-emc-table";
-			clock-frequency = <380000>;
-			nvidia,emc-registers = <0x00000017 0x0000004b
-				0x00000012 0x00000006 0x00000004 0x00000005
-				0x00000003 0x0000000c 0x00000006 0x00000006
-				0x00000003 0x00000001 0x00000004 0x00000005
-				0x00000004 0x00000009 0x0000000d 0x00000b5f
-				0x00000000 0x00000003 0x00000003 0x00000006
-				0x00000006 0x00000001 0x00000011 0x000000c8
-				0x00000003 0x0000000e 0x00000007 0x0000000f
-				0x00000002 0x00000000 0x00000000 0x00000002
-				0x00000000 0x00000000 0x00000083 0xe044048b
-				0x007d8010 0x00000000 0x00000000 0x00000000
-				0x00000000 0x00000000 0x00000000 0x00000000>;
-		};
-	};
-
-	usb@c5000000 {
-		status = "okay";
-		dr_mode = "otg";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		vbus-supply = <&vbus_reg>;
-		dr_mode = "otg";
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000000 {
-		status = "okay";
-		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		keep-power-in-suspend;
-	};
-
-	sdhci@c8000400 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_bl_reg>;
-		pwms = <&pwm 2 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-
-		lid {
-			label = "Lid";
-			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		compatible = "chunghwa,claa101wa01a", "simple-panel";
-
-		power-supply = <&vdd_pnl_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&lvds_ddc>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_vbus_wup1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_pnl_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_pnl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_bl_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-seaboard",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Seaboard";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1R", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-tamonten.dtsi b/src/arm/tegra20-tamonten.dtsi
deleted file mode 100644
index 80e7d386ce34..000000000000
--- a/src/arm/tegra20-tamonten.dtsi
+++ /dev/null
@@ -1,528 +0,0 @@
-#include "tegra20.dtsi"
-
-/ {
-	model = "Avionic Design Tamonten SOM";
-	compatible = "ad,tamonten", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
-					"spia", "spib", "spic";
-				nvidia,function = "gmi";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			dta {
-				nvidia,pins = "dta", "dtd";
-				nvidia,function = "sdio2";
-			};
-			dtb {
-				nvidia,pins = "dtb", "dtc", "dte";
-				nvidia,function = "rsvd1";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uarta";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
-					"ld3", "ld4", "ld5", "ld6", "ld7",
-					"ld8", "ld9", "ld10", "ld11", "ld12",
-					"ld13", "ld14", "ld15", "ld16", "ld17",
-					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
-					"lhs", "lm0", "lm1", "lpp", "lpw0",
-					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
-					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
-					"lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "pwm";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxc {
-				nvidia,pins = "slxc", "slxd";
-				nvidia,function = "spdif";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
-					"gpv", "i2cp", "pta", "rm", "slxa",
-					"slxk", "spia", "spib", "uac";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_csus {
-				nvidia,pins = "csus", "spid", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
-					"slxc", "slxd", "spdi", "spdo", "spig",
-					"uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ddc {
-				nvidia,pins = "ddc", "dta", "dtd", "kbca",
-					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"sdc";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
-					"lvp0", "owc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "sdd", "spic",
-					"spie", "spih", "uaa", "uab", "uad",
-					"uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
-					"lvs", "pmc";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-		};
-
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_pta: pinmux_i2cmux_pta {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
-			};
-		};
-
-		state_i2cmux_idle: pinmux_i2cmux_idle {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-		status = "okay";
-	};
-
-	i2c@7000c400 {
-		clock-frequency = <100000>;
-		status = "okay";
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	i2c@7000d000 {
-		clock-frequency = <400000>;
-		status = "okay";
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			/* vdd_5v0_reg must be provided by the base board */
-			sys-supply = <&vdd_5v0_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				sm0 {
-					regulator-name = "vdd_sys_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				sm1 {
-					regulator-name = "vdd_sys_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sys_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				pci_clk_reg: ldo0 {
-					regulator-name = "vdd_ldo0,vddio_pex_clk";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac";
-					/*
-					 * According to the Tegra 2 Automotive
-					 * DataSheet, a typical value for this
-					 * would be 2.8V, but the PMIC only
-					 * supports 2.85V.
-					 */
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
-					/*
-					 * According to the Tegra 2 Automotive
-					 * DataSheet, a typical value for this
-					 * would be 2.8V, but the PMIC only
-					 * supports 2.85V.
-					 */
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <3875>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	pcie-controller@80003000 {
-		avdd-pex-supply = <&pci_vdd_reg>;
-		vdd-pex-supply = <&pci_vdd_reg>;
-		avdd-pex-pll-supply = <&pci_vdd_reg>;
-		avdd-plle-supply = <&pci_vdd_reg>;
-		vddio-pex-clk-supply = <&pci_clk_reg>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000600 {
-		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		status = "okay";
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pci_vdd_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v05";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&pmic 2 0>;
-			enable-active-high;
-		};
-	};
-};
diff --git a/src/arm/tegra20-tec.dts b/src/arm/tegra20-tec.dts
deleted file mode 100644
index c12d8bead2ee..000000000000
--- a/src/arm/tegra20-tec.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-/dts-v1/;
-
-#include "tegra20-tamonten.dtsi"
-
-/ {
-	model = "Avionic Design Tamonten Evaluation Carrier";
-	compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	i2c@7000c000 {
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff
-				    0xffffffff
-				    0
-				    0xffffffff
-				    0xffffffff>;
-		};
-	};
-
-	pcie-controller@80003000 {
-		status = "okay";
-
-		pci@1,0 {
-			status = "okay";
-		};
-	};
-
-	sound {
-		compatible = "ad,tegra-audio-wm8903-tec",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Avionic Design TEC";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	regulators {
-		vcc_24v_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vcc_24v";
-			regulator-min-microvolt = <24000000>;
-			regulator-max-microvolt = <24000000>;
-			regulator-always-on;
-		};
-
-		vdd_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "vdd_5v0";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vdd_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "vdd_3v3";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vdd_1v8_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "vdd_1v8";
-			vin-supply = <&vdd_3v3_reg>;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra20-trimslice.dts b/src/arm/tegra20-trimslice.dts
deleted file mode 100644
index 5ad87979ab13..000000000000
--- a/src/arm/tegra20-trimslice.dts
+++ /dev/null
@@ -1,467 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "Compulab TrimSlice board";
-	compatible = "compulab,trimslice", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000c500/rtc@56";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-			atb {
-				nvidia,pins = "atb", "gma";
-				nvidia,function = "sdio4";
-			};
-			atc {
-				nvidia,pins = "atc", "gmb";
-				nvidia,function = "nand";
-			};
-			atd {
-				nvidia,pins = "atd", "ate", "gme", "pta";
-				nvidia,function = "gmi";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "vi";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gmc {
-				nvidia,pins = "gmc", "gmd";
-				nvidia,function = "sflash";
-			};
-			gpu {
-				nvidia,pins = "gpu";
-				nvidia,function = "uarta";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
-					"ld3", "ld4", "ld5", "ld6", "ld7",
-					"ld8", "ld9", "ld10", "ld11", "ld12",
-					"ld13", "ld14", "ld15", "ld16", "ld17",
-					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
-					"lhs", "lm0", "lm1", "lpp", "lpw0",
-					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
-					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
-					"lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "uac";
-				nvidia,function = "rsvd2";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd";
-				nvidia,function = "pwm";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxc {
-				nvidia,pins = "slxc", "slxd";
-				nvidia,function = "sdio3";
-			};
-			spdi {
-				nvidia,pins = "spdi", "spdo";
-				nvidia,function = "spdif";
-			};
-			spia {
-				nvidia,pins = "spia", "spib", "spic";
-				nvidia,function = "spi2";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atc", "atd", "ate",
-					"crtp", "dap2", "dap3", "dap4", "dta",
-					"dtb", "dtc", "dtd", "dte", "gmb",
-					"gme", "i2cp", "pta", "slxc", "slxd",
-					"spdi", "spdo", "uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_atb {
-				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
-					"gma", "gmc", "gmd", "gpu", "gpu7",
-					"gpv", "sdio1", "slxa", "slxk", "uac";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_csus {
-				nvidia,pins = "csus", "spia", "spib",
-					"spid", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ddc {
-				nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
-					"lvp0", "pmc";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "kbca", "kbcb",
-					"kbcc", "kbcd", "kbce", "kbcf", "owc",
-					"spic", "spie", "spig", "spih", "uaa",
-					"uab", "uad", "uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
-					"lvs", "sdb";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-			conf_spif {
-				nvidia,pins = "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	dvi_ddc: i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	spi@7000c380 {
-		status = "okay";
-		spi-max-frequency = <48000000>;
-		spi-flash@0 {
-			compatible = "winbond,w25q80bl";
-			reg = <0>;
-			spi-max-frequency = <48000000>;
-		};
-	};
-
-	hdmi_ddc: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		codec: codec@1a {
-			compatible = "ti,tlv320aic23";
-			reg = <0x1a>;
-		};
-
-		rtc@56 {
-			compatible = "emmicro,em3027";
-			reg = <0x56>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <3875>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	pcie-controller@80003000 {
-		status = "okay";
-
-		avdd-pex-supply = <&pci_vdd_reg>;
-		vdd-pex-supply = <&pci_vdd_reg>;
-		avdd-pex-pll-supply = <&pci_vdd_reg>;
-		avdd-plle-supply = <&pci_vdd_reg>;
-		vddio-pex-clk-supply = <&pci_clk_reg>;
-
-		pci@1,0 {
-			status = "okay";
-		};
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		vbus-supply = <&vbus_reg>;
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000000 {
-		status = "okay";
-		bus-width = <4>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hdmi_vdd_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "avdd_hdmi";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		hdmi_pll_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "avdd_hdmi_pll";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vbus_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pci_clk_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "pci_clk";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		pci_vdd_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "pci_vdd";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-trimslice";
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&codec>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-ventana.dts b/src/arm/tegra20-ventana.dts
deleted file mode 100644
index ca8484cccddc..000000000000
--- a/src/arm/tegra20-ventana.dts
+++ /dev/null
@@ -1,701 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Tegra20 Ventana evaluation board";
-	compatible = "nvidia,ventana", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				nvidia,panel = <&panel>;
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "spia",
-					"spib", "spic";
-				nvidia,function = "gmi";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-			crtp {
-				nvidia,pins = "crtp", "lm1";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "vi";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-			gmd {
-				nvidia,pins = "gmd";
-				nvidia,function = "sflash";
-			};
-			gpu {
-				nvidia,pins = "gpu";
-				nvidia,function = "pwm";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv", "slxa", "slxk";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
-					"lsdi", "lvp0";
-				nvidia,function = "rsvd4";
-			};
-			ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
-					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
-					"lspi", "lvp1", "lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd", "slxc";
-				nvidia,function = "sdio3";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			slxd {
-				nvidia,pins = "slxd";
-				nvidia,function = "spdif";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd",
-					"cdev1", "cdev2", "dap1", "dap2",
-					"dap4", "ddc", "dtf", "gma", "gmc",
-					"gme", "gpu", "gpu7", "i2cp", "irrx",
-					"irtx", "pta", "rm", "sdc", "sdd",
-					"slxc", "slxd", "slxk", "spdi", "spdo",
-					"uac", "uad", "uca", "ucb", "uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ate {
-				nvidia,pins = "ate", "csus", "dap3", "gmd",
-					"gpv", "owc", "spia", "spib", "spic",
-					"spid", "spie", "spig";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp", "gmb", "slxa", "spih";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_dte {
-				nvidia,pins = "dte", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf", "sdio1", "uaa", "uab";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
-					"lvp1", "lvs", "pmc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <31>;
-				nvidia,pull-up-strength = <31>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-			};
-		};
-
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_pta: pinmux_i2cmux_pta {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
-			};
-		};
-
-		state_i2cmux_idle: pinmux_i2cmux_idle {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-		};
-
-		/* ALS and proximity sensor */
-		isl29018@44 {
-			compatible = "isil,isl29018";
-			reg = <0x44>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: tps6586x@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_5v0_reg>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				sm0 {
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				sm1 {
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <100>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <458>;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-	};
-
-	usb@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb-phy@c5004000 {
-		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000000 {
-		status = "okay";
-		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		keep-power-in-suspend;
-	};
-
-	sdhci@c8000400 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_bl_reg>;
-		pwms = <&pwm 2 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		compatible = "chunghwa,claa101wa01a", "simple-panel";
-
-		power-supply = <&vdd_pnl_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&lvds_ddc>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_pnl_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_pnl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_bl_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-ventana",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Ventana";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
-			GPIO_ACTIVE_HIGH>;
-		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
-			GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20-whistler.dts b/src/arm/tegra20-whistler.dts
deleted file mode 100644
index 1843725785c9..000000000000
--- a/src/arm/tegra20-whistler.dts
+++ /dev/null
@@ -1,631 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra20.dtsi"
-
-/ {
-	model = "NVIDIA Tegra20 Whistler evaluation board";
-	compatible = "nvidia,whistler", "nvidia,tegra20";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/max8907@3c";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata", "atb", "ate", "gma", "gmb",
-					"gmc", "gmd", "gpu";
-				nvidia,function = "gmi";
-			};
-			atc {
-				nvidia,pins = "atc", "atd";
-				nvidia,function = "sdio4";
-			};
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "osc";
-			};
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,function = "vi";
-			};
-			dte {
-				nvidia,pins = "dte";
-				nvidia,function = "rsvd1";
-			};
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-			gme {
-				nvidia,pins = "gme";
-				nvidia,function = "dap5";
-			};
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-			gpv {
-				nvidia,pins = "gpv";
-				nvidia,function = "pcie";
-			};
-			hdint {
-				nvidia,pins = "hdint", "pta";
-				nvidia,function = "hdmi";
-			};
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-			kbca {
-				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-			kbcb {
-				nvidia,pins = "kbcb", "kbcd";
-				nvidia,function = "sdio2";
-			};
-			lcsn {
-				nvidia,pins = "lcsn", "lsck", "lsda", "lsdi",
-					"spia", "spib", "spic";
-				nvidia,function = "spi3";
-			};
-			ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldc", "ldi",
-					"lhp0", "lhp1", "lhp2", "lhs", "lm0",
-					"lm1", "lpp", "lpw0", "lpw1", "lpw2",
-					"lsc0", "lsc1", "lspi", "lvp0", "lvp1",
-					"lvs";
-				nvidia,function = "displaya";
-			};
-			owc {
-				nvidia,pins = "owc", "uac";
-				nvidia,function = "owr";
-			};
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd", "slxa",
-					"slxc", "slxd", "slxk";
-				nvidia,function = "sdio3";
-			};
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-			spdi {
-				nvidia,pins = "spdi", "spdo";
-				nvidia,function = "rsvd2";
-			};
-			spid {
-				nvidia,pins = "spid", "spie", "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-			spif {
-				nvidia,pins = "spif";
-				nvidia,function = "spi2";
-			};
-			uaa {
-				nvidia,pins = "uaa", "uab";
-				nvidia,function = "uarta";
-			};
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-			uda {
-				nvidia,pins = "uda";
-				nvidia,function = "spi1";
-			};
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "ddc", "gma",
-					"gmb", "gmc", "gmd", "irrx", "irtx",
-					"kbca", "kbcb", "kbcc", "kbcd", "kbce",
-					"kbcf", "sdc", "sdd", "spie", "spig",
-					"spih", "uaa", "uab", "uad", "uca",
-					"ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_atd {
-				nvidia,pins = "atd", "ate", "cdev1", "csus",
-					"dap1", "dap2", "dap3", "dap4", "dte",
-					"dtf", "gpu", "gpu7", "gpv", "i2cp",
-					"rm", "sdio1", "slxa", "slxc", "slxd",
-					"slxk", "spdi", "spdo", "uac", "uda";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_cdev2 {
-				nvidia,pins = "cdev2", "spia", "spib";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "lc", "pmca",
-					"pmcb", "pmcc", "pmcd", "xm2c",
-					"xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-			conf_crtp {
-				nvidia,pins = "crtp";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd",
-					"spid", "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			conf_gme {
-				nvidia,pins = "gme", "owc", "pta", "spic";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-			conf_ls {
-				nvidia,pins = "ls", "pmce";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			drive_dap1 {
-				nvidia,pins = "drive_dap1";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_8>;
-				nvidia,pull-down-strength = <0>;
-				nvidia,pull-up-strength = <0>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
-			};
-		};
-	};
-
-	i2s@70002800 {
-		status = "okay";
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	hdmi_ddc: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		codec: codec@1a {
-			compatible = "wlf,wm8753";
-			reg = <0x1a>;
-		};
-
-		tca6416: gpio@20 {
-			compatible = "ti,tca6416";
-			reg = <0x20>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		max8907@3c {
-			compatible = "maxim,max8907";
-			reg = <0x3c>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			maxim,system-power-controller;
-
-			mbatt-supply = <&usb0_vbus_reg>;
-			in-v1-supply = <&mbatt_reg>;
-			in-v2-supply = <&mbatt_reg>;
-			in-v3-supply = <&mbatt_reg>;
-			in1-supply = <&mbatt_reg>;
-			in2-supply = <&nvvdd_sv3_reg>;
-			in3-supply = <&mbatt_reg>;
-			in4-supply = <&mbatt_reg>;
-			in5-supply = <&mbatt_reg>;
-			in6-supply = <&mbatt_reg>;
-			in7-supply = <&mbatt_reg>;
-			in8-supply = <&mbatt_reg>;
-			in9-supply = <&mbatt_reg>;
-			in10-supply = <&mbatt_reg>;
-			in11-supply = <&mbatt_reg>;
-			in12-supply = <&mbatt_reg>;
-			in13-supply = <&mbatt_reg>;
-			in14-supply = <&mbatt_reg>;
-			in15-supply = <&mbatt_reg>;
-			in16-supply = <&mbatt_reg>;
-			in17-supply = <&nvvdd_sv3_reg>;
-			in18-supply = <&nvvdd_sv3_reg>;
-			in19-supply = <&mbatt_reg>;
-			in20-supply = <&mbatt_reg>;
-
-			regulators {
-				mbatt_reg: mbatt {
-					regulator-name = "vbat_pmu";
-					regulator-always-on;
-				};
-
-				sd1 {
-					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				sd2 {
-					regulator-name = "nvvdd_sv2,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				nvvdd_sv3_reg: sd3 {
-					regulator-name = "nvvdd_sv3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo1 {
-					regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo2 {
-					regulator-name = "nvvdd_ldo2,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo3 {
-					regulator-name = "nvvdd_ldo3,vcom_1v8b";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "nvvdd_ldo4,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo5 {
-					regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				hdmi_pll_reg: ldo6 {
-					regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo7 {
-					regulator-name = "nvvdd_ldo7,avddio_audio";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo8 {
-					regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				ldo9 {
-					regulator-name = "nvvdd_ldo9,avdd_cam*";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo10 {
-					regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				hdmi_vdd_reg: ldo11 {
-					regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo12 {
-					regulator-name = "nvvdd_ldo12,vddio_sdio";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo13 {
-					regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo14 {
-					regulator-name = "nvvdd_ldo14,avdd_vdac";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo15 {
-					regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo16 {
-					regulator-name = "nvvdd_ldo16,vdd_dbrtr";
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-				};
-
-				ldo17 {
-					regulator-name = "nvvdd_ldo17,vddio_mipi";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo18 {
-					regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo19 {
-					regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo20 {
-					regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				out5v {
-					regulator-name = "usb0_vbus_reg";
-				};
-
-				out33v {
-					regulator-name = "pmu_out3v3";
-				};
-
-				bbat {
-					regulator-name = "pmu_bbat";
-					regulator-min-microvolt = <2400000>;
-					regulator-max-microvolt = <2400000>;
-					regulator-always-on;
-				};
-
-				sdby {
-					regulator-name = "vdd_aon";
-					regulator-always-on;
-				};
-
-				vrtc {
-					regulator-name = "vrtc,pmu_vccadc";
-					regulator-always-on;
-				};
-			};
-		};
-	};
-
-	kbc@7000e200 {
-		status = "okay";
-		nvidia,debounce-delay-ms = <20>;
-		nvidia,repeat-delay-ms = <160>;
-		nvidia,kbc-row-pins = <0 1 2>;
-		nvidia,kbc-col-pins = <16 17>;
-		nvidia,wakeup-source;
-		linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_POWER)
-				MATRIX_KEY(0x01, 0x00, KEY_HOME)
-				MATRIX_KEY(0x01, 0x01, KEY_BACK)
-				MATRIX_KEY(0x02, 0x01, KEY_MENU)>;
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <1000>;
-		nvidia,core-pwr-good-time = <0 3845>;
-		nvidia,core-pwr-off-time = <93727>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-		nvidia,combined-power-req;
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		vbus-supply = <&vbus1_reg>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-		vbus-supply = <&vbus3_reg>;
-	};
-
-	sdhci@c8000400 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
-		bus-width = <8>;
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb0_vbus_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		vbus1_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vbus1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vbus3_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vbus3";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8753-whistler",
-			     "nvidia,tegra-audio-wm8753";
-		nvidia,model = "NVIDIA Tegra Whistler";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "LOUT1",
-			"Headphone Jack", "ROUT1",
-			"MIC2", "Mic Jack",
-			"MIC2N", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&codec>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra20.dtsi b/src/arm/tegra20.dtsi
deleted file mode 100644
index 1908f6937e53..000000000000
--- a/src/arm/tegra20.dtsi
+++ /dev/null
@@ -1,782 +0,0 @@
-#include <dt-bindings/clock/tegra20-car.h>
-#include <dt-bindings/gpio/tegra-gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "nvidia,tegra20";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-		serial4 = &uarte;
-	};
-
-	host1x@50000000 {
-		compatible = "nvidia,tegra20-host1x", "simple-bus";
-		reg = <0x50000000 0x00024000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
-			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
-		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x54000000 0x54000000 0x04000000>;
-
-		mpe@54040000 {
-			compatible = "nvidia,tegra20-mpe";
-			reg = <0x54040000 0x00040000>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_MPE>;
-			resets = <&tegra_car 60>;
-			reset-names = "mpe";
-		};
-
-		vi@54080000 {
-			compatible = "nvidia,tegra20-vi";
-			reg = <0x54080000 0x00040000>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_VI>;
-			resets = <&tegra_car 20>;
-			reset-names = "vi";
-		};
-
-		epp@540c0000 {
-			compatible = "nvidia,tegra20-epp";
-			reg = <0x540c0000 0x00040000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_EPP>;
-			resets = <&tegra_car 19>;
-			reset-names = "epp";
-		};
-
-		isp@54100000 {
-			compatible = "nvidia,tegra20-isp";
-			reg = <0x54100000 0x00040000>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_ISP>;
-			resets = <&tegra_car 23>;
-			reset-names = "isp";
-		};
-
-		gr2d@54140000 {
-			compatible = "nvidia,tegra20-gr2d";
-			reg = <0x54140000 0x00040000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
-		};
-
-		gr3d@54140000 {
-			compatible = "nvidia,tegra20-gr3d";
-			reg = <0x54140000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
-		};
-
-		dc@54200000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54200000 0x00040000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			nvidia,head = <0>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		dc@54240000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54240000 0x00040000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			nvidia,head = <1>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		hdmi@54280000 {
-			compatible = "nvidia,tegra20-hdmi";
-			reg = <0x54280000 0x00040000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
-				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		tvo@542c0000 {
-			compatible = "nvidia,tegra20-tvo";
-			reg = <0x542c0000 0x00040000>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA20_CLK_TVO>;
-			status = "disabled";
-		};
-
-		dsi@542c0000 {
-			compatible = "nvidia,tegra20-dsi";
-			reg = <0x542c0000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_DSI>;
-			resets = <&tegra_car 48>;
-			reset-names = "dsi";
-			status = "disabled";
-		};
-	};
-
-	timer@50004600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x50040600 0x20>;
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-		clocks = <&tegra_car TEGRA20_CLK_TWD>;
-	};
-
-	intc: interrupt-controller@50041000 {
-		compatible = "arm,cortex-a9-gic";
-		reg = <0x50041000 0x1000
-		       0x50040100 0x0100>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-	};
-
-	cache-controller@50043000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x50043000 0x1000>;
-		arm,data-latency = <5 5 2>;
-		arm,tag-latency = <4 4 2>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	timer@60005000 {
-		compatible = "nvidia,tegra20-timer";
-		reg = <0x60005000 0x60>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_TIMER>;
-	};
-
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra20-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	apbdma: dma@6000a000 {
-		compatible = "nvidia,tegra20-apbdma";
-		reg = <0x6000a000 0x1200>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
-		resets = <&tegra_car 34>;
-		reset-names = "dma";
-		#dma-cells = <1>;
-	};
-
-	ahb@6000c004 {
-		compatible = "nvidia,tegra20-ahb";
-		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
-	};
-
-	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra20-gpio";
-		reg = <0x6000d000 0x1000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	apbmisc@70000800 {
-		compatible = "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64   /* Chip revision */
-		       0x70000008 0x04>; /* Strapping options */
-	};
-
-	pinmux: pinmux@70000014 {
-		compatible = "nvidia,tegra20-pinmux";
-		reg = <0x70000014 0x10   /* Tri-state registers */
-		       0x70000080 0x20   /* Mux registers */
-		       0x700000a0 0x14   /* Pull-up/down registers */
-		       0x70000868 0xa8>; /* Pad control registers */
-	};
-
-	das@70000c00 {
-		compatible = "nvidia,tegra20-das";
-		reg = <0x70000c00 0x80>;
-	};
-
-	tegra_ac97: ac97@70002000 {
-		compatible = "nvidia,tegra20-ac97";
-		reg = <0x70002000 0x200>;
-		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_AC97>;
-		resets = <&tegra_car 3>;
-		reset-names = "ac97";
-		dmas = <&apbdma 12>, <&apbdma 12>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	tegra_i2s1: i2s@70002800 {
-		compatible = "nvidia,tegra20-i2s";
-		reg = <0x70002800 0x200>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_I2S1>;
-		resets = <&tegra_car 11>;
-		reset-names = "i2s";
-		dmas = <&apbdma 2>, <&apbdma 2>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	tegra_i2s2: i2s@70002a00 {
-		compatible = "nvidia,tegra20-i2s";
-		reg = <0x70002a00 0x200>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_I2S2>;
-		resets = <&tegra_car 18>;
-		reset-names = "i2s";
-		dmas = <&apbdma 1>, <&apbdma 1>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	/*
-	 * There are two serial driver i.e. 8250 based simple serial
-	 * driver and APB DMA based serial driver for higher baudrate
-	 * and performace. To enable the 8250 based driver, the compatible
-	 * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
-	 * driver, the comptible is "nvidia,tegra20-hsuart".
-	 */
-	uarta: serial@70006000 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006000 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
-		resets = <&tegra_car 6>;
-		reset-names = "serial";
-		dmas = <&apbdma 8>, <&apbdma 8>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartb: serial@70006040 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006040 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
-		resets = <&tegra_car 7>;
-		reset-names = "serial";
-		dmas = <&apbdma 9>, <&apbdma 9>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartc: serial@70006200 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006200 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
-		resets = <&tegra_car 55>;
-		reset-names = "serial";
-		dmas = <&apbdma 10>, <&apbdma 10>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartd: serial@70006300 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006300 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
-		resets = <&tegra_car 65>;
-		reset-names = "serial";
-		dmas = <&apbdma 19>, <&apbdma 19>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uarte: serial@70006400 {
-		compatible = "nvidia,tegra20-uart";
-		reg = <0x70006400 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
-		resets = <&tegra_car 66>;
-		reset-names = "serial";
-		dmas = <&apbdma 20>, <&apbdma 20>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	pwm: pwm@7000a000 {
-		compatible = "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car TEGRA20_CLK_PWM>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-		status = "disabled";
-	};
-
-	rtc@7000e000 {
-		compatible = "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_RTC>;
-	};
-
-	i2c@7000c000 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_I2C1>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 21>, <&apbdma 21>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000c380 {
-		compatible = "nvidia,tegra20-sflash";
-		reg = <0x7000c380 0x80>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_SPI>;
-		resets = <&tegra_car 43>;
-		reset-names = "spi";
-		dmas = <&apbdma 11>, <&apbdma 11>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c400 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c400 0x100>;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_I2C2>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 54>;
-		reset-names = "i2c";
-		dmas = <&apbdma 22>, <&apbdma 22>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c500 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c500 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-		dmas = <&apbdma 23>, <&apbdma 23>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000d000 {
-		compatible = "nvidia,tegra20-i2c-dvc";
-		reg = <0x7000d000 0x200>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_DVC>,
-			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 47>;
-		reset-names = "i2c";
-		dmas = <&apbdma 24>, <&apbdma 24>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d400 {
-		compatible = "nvidia,tegra20-slink";
-		reg = <0x7000d400 0x200>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_SBC1>;
-		resets = <&tegra_car 41>;
-		reset-names = "spi";
-		dmas = <&apbdma 15>, <&apbdma 15>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d600 {
-		compatible = "nvidia,tegra20-slink";
-		reg = <0x7000d600 0x200>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_SBC2>;
-		resets = <&tegra_car 44>;
-		reset-names = "spi";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d800 {
-		compatible = "nvidia,tegra20-slink";
-		reg = <0x7000d800 0x200>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_SBC3>;
-		resets = <&tegra_car 46>;
-		reset-names = "spi";
-		dmas = <&apbdma 17>, <&apbdma 17>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000da00 {
-		compatible = "nvidia,tegra20-slink";
-		reg = <0x7000da00 0x200>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA20_CLK_SBC4>;
-		resets = <&tegra_car 68>;
-		reset-names = "spi";
-		dmas = <&apbdma 18>, <&apbdma 18>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	kbc@7000e200 {
-		compatible = "nvidia,tegra20-kbc";
-		reg = <0x7000e200 0x100>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_KBC>;
-		resets = <&tegra_car 36>;
-		reset-names = "kbc";
-		status = "disabled";
-	};
-
-	pmc@7000e400 {
-		compatible = "nvidia,tegra20-pmc";
-		reg = <0x7000e400 0x400>;
-		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-	};
-
-	memory-controller@7000f000 {
-		compatible = "nvidia,tegra20-mc";
-		reg = <0x7000f000 0x024
-		       0x7000f03c 0x3c4>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	iommu@7000f024 {
-		compatible = "nvidia,tegra20-gart";
-		reg = <0x7000f024 0x00000018	/* controller registers */
-		       0x58000000 0x02000000>;	/* GART aperture */
-	};
-
-	memory-controller@7000f400 {
-		compatible = "nvidia,tegra20-emc";
-		reg = <0x7000f400 0x200>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	fuse@7000f800 {
-		compatible = "nvidia,tegra20-efuse";
-		reg = <0x7000F800 0x400>;
-		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-	pcie-controller@80003000 {
-		compatible = "nvidia,tegra20-pcie";
-		device_type = "pci";
-		reg = <0x80003000 0x00000800   /* PADS registers */
-		       0x80003800 0x00000200   /* AFI registers */
-		       0x90000000 0x10000000>; /* configuration space */
-		reg-names = "pads", "afi", "cs";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
-			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
-		interrupt-names = "intr", "msi";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
-		bus-range = <0x00 0xff>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
-			  0x82000000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
-			  0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0xa0000000 0xa0000000 0 0x08000000   /* non-prefetchable memory */
-			  0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
-
-		clocks = <&tegra_car TEGRA20_CLK_PEX>,
-			 <&tegra_car TEGRA20_CLK_AFI>,
-			 <&tegra_car TEGRA20_CLK_PLL_E>;
-		clock-names = "pex", "afi", "pll_e";
-		resets = <&tegra_car 70>,
-		         <&tegra_car 72>,
-		         <&tegra_car 74>;
-		reset-names = "pex", "afi", "pcie_x";
-		status = "disabled";
-
-		pci@1,0 {
-			device_type = "pci";
-			assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
-			reg = <0x000800 0 0 0 0>;
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-
-			nvidia,num-lanes = <2>;
-		};
-
-		pci@2,0 {
-			device_type = "pci";
-			assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
-			reg = <0x001000 0 0 0 0>;
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-
-			nvidia,num-lanes = <2>;
-		};
-	};
-
-	usb@c5000000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
-		reg = <0xc5000000 0x4000>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		nvidia,has-legacy-mode;
-		clocks = <&tegra_car TEGRA20_CLK_USBD>;
-		resets = <&tegra_car 22>;
-		reset-names = "usb";
-		nvidia,needs-double-reset;
-		nvidia,phy = <&phy1>;
-		status = "disabled";
-	};
-
-	phy1: usb-phy@c5000000 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5000000 0x4000 0xc5000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA20_CLK_USBD>,
-			 <&tegra_car TEGRA20_CLK_PLL_U>,
-			 <&tegra_car TEGRA20_CLK_CLK_M>,
-			 <&tegra_car TEGRA20_CLK_USBD>;
-		clock-names = "reg", "pll_u", "timer", "utmi-pads";
-		resets = <&tegra_car 22>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,has-legacy-mode;
-		nvidia,hssync-start-delay = <9>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <1>;
-		nvidia,xcvr-lsrslew = <1>;
-		nvidia,has-utmi-pad-registers;
-		status = "disabled";
-	};
-
-	usb@c5004000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
-		reg = <0xc5004000 0x4000>;
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "ulpi";
-		clocks = <&tegra_car TEGRA20_CLK_USB2>;
-		resets = <&tegra_car 58>;
-		reset-names = "usb";
-		nvidia,phy = <&phy2>;
-		status = "disabled";
-	};
-
-	phy2: usb-phy@c5004000 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5004000 0x4000>;
-		phy_type = "ulpi";
-		clocks = <&tegra_car TEGRA20_CLK_USB2>,
-			 <&tegra_car TEGRA20_CLK_PLL_U>,
-			 <&tegra_car TEGRA20_CLK_CDEV2>;
-		clock-names = "reg", "pll_u", "ulpi-link";
-		resets = <&tegra_car 58>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		status = "disabled";
-	};
-
-	usb@c5008000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
-		reg = <0xc5008000 0x4000>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA20_CLK_USB3>;
-		resets = <&tegra_car 59>;
-		reset-names = "usb";
-		nvidia,phy = <&phy3>;
-		status = "disabled";
-	};
-
-	phy3: usb-phy@c5008000 {
-		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5008000 0x4000 0xc5000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA20_CLK_USB3>,
-			 <&tegra_car TEGRA20_CLK_PLL_U>,
-			 <&tegra_car TEGRA20_CLK_CLK_M>,
-			 <&tegra_car TEGRA20_CLK_USBD>;
-		clock-names = "reg", "pll_u", "timer", "utmi-pads";
-		resets = <&tegra_car 59>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <9>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <9>;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		status = "disabled";
-	};
-
-	sdhci@c8000000 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000000 0x200>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
-		resets = <&tegra_car 14>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@c8000200 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000200 0x200>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
-		resets = <&tegra_car 9>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@c8000400 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000400 0x200>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
-		resets = <&tegra_car 69>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@c8000600 {
-		compatible = "nvidia,tegra20-sdhci";
-		reg = <0xc8000600 0x200>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
-		resets = <&tegra_car 15>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
diff --git a/src/arm/tegra30-apalis-eval.dts b/src/arm/tegra30-apalis-eval.dts
deleted file mode 100644
index 45d40f024585..000000000000
--- a/src/arm/tegra30-apalis-eval.dts
+++ /dev/null
@@ -1,260 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "tegra30-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis T30 on Apalis Evaluation Board";
-	compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30";
-
-	aliases {
-		rtc0 = "/i2c@7000c000/rtc@68";
-		rtc1 = "/i2c@7000d000/tps65911@2d";
-		rtc2 = "/rtc@7000e000";
-	};
-
-	pcie-controller@00003000 {
-		status = "okay";
-
-		pci@1,0 {
-			status = "okay";
-		};
-
-		pci@2,0 {
-			status = "okay";
-		};
-
-		pci@3,0 {
-			status = "okay";
-		};
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-				nvidia,panel = <&panel>;
-			};
-		};
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006040 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	serial@70006200 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	serial@70006300 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	/*
-	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
-	 * board)
-	 */
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		pcie-switch@58 {
-			compatible = "plx,pex8605";
-			reg = <0x58>;
-		};
-
-		/* M41T0M6 real time clock on carrier board */
-		rtc@68 {
-			compatible = "st,m41t00";
-			reg = <0x68>;
-		};
-	};
-
-	/* GEN2_I2C: unused */
-
-	/*
-	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
-	 * carrier board)
-	 */
-	cami2c: i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
-	hdmiddc: i2c@7000c700 {
-		status = "okay";
-	};
-
-	/* SPI1: Apalis SPI1 */
-	spi@7000d400 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spidev0: spidev@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <25000000>;
-		};
-	};
-
-	/* SPI5: Apalis SPI2 */
-	spi@7000dc00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spidev1: spidev@2 {
-			compatible = "spidev";
-			reg = <2>;
-			spi-max-frequency = <25000000>;
-		};
-	};
-
-	sd1: sdhci@78000000 {
-		status = "okay";
-		bus-width = <4>;
-		/* SD1_CD# */
-		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
-		no-1-8-v;
-	};
-
-	mmc1: sdhci@78000400 {
-		status = "okay";
-		bus-width = <8>;
-		/* MMC1_CD# */
-		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
-		no-1-8-v;
-	};
-
-	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
-	usb@7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-		vbus-supply = <&usbo1_vbus_reg>;
-	};
-
-	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
-	usb@7d004000 {
-		status = "okay";
-	};
-
-	usb-phy@7d004000 {
-		status = "okay";
-		vbus-supply = <&usbh_vbus_reg>;
-	};
-
-	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		vbus-supply = <&usbh_vbus_reg>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		/* PWM0 */
-		pwms = <&pwm 0 5000000>;
-		brightness-levels = <255 231 223 207 191 159 127 0>;
-		default-brightness-level = <6>;
-		/* BKL1_ON */
-		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu", "simple-panel";
-
-		backlight = <&backlight>;
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		pwm1 {
-			label = "PWM1";
-			pwms = <&pwm 3 19600>;
-			max-brightness = <255>;
-		};
-
-		pwm2 {
-			label = "PWM2";
-			pwms = <&pwm 2 19600>;
-			max-brightness = <255>;
-		};
-
-		pwm3 {
-			label = "PWM3";
-			pwms = <&pwm 1 19600>;
-			max-brightness = <255>;
-		};
-	};
-
-	regulators {
-		sys_5v0_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		/* USBO1_EN */
-		usbo1_vbus_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usbo1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&sys_5v0_reg>;
-		};
-
-		/* USBH_EN */
-		usbh_vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usbh_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&sys_5v0_reg>;
-		};
-	};
-};
diff --git a/src/arm/tegra30-apalis.dtsi b/src/arm/tegra30-apalis.dtsi
deleted file mode 100644
index a5446cba9804..000000000000
--- a/src/arm/tegra30-apalis.dtsi
+++ /dev/null
@@ -1,687 +0,0 @@
-#include "tegra30.dtsi"
-
-/*
- * Toradex Apalis T30 Device Tree
- * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
- */
-/ {
-	model = "Toradex Apalis T30";
-	compatible = "toradex,apalis_t30", "nvidia,tegra30";
-
-	pcie-controller@00003000 {
-		avdd-pexa-supply = <&vdd2_reg>;
-		vdd-pexa-supply = <&vdd2_reg>;
-		avdd-pexb-supply = <&vdd2_reg>;
-		vdd-pexb-supply = <&vdd2_reg>;
-		avdd-pex-pll-supply = <&vdd2_reg>;
-		avdd-plle-supply = <&ldo6_reg>;
-		vddio-pex-ctl-supply = <&sys_3v3_reg>;
-		hvdd-pex-supply = <&sys_3v3_reg>;
-
-		pci@1,0 {
-			nvidia,num-lanes = <4>;
-		};
-
-		pci@2,0 {
-			nvidia,num-lanes = <1>;
-		};
-
-		pci@3,0 {
-			nvidia,num-lanes = <1>;
-		};
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
-
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-			nvidia,ddc-i2c-bus = <&hdmiddc>;
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			/* Apalis BKL1_ON */
-			pv2 {
-				nvidia,pins = "pv2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis BKL1_PWM */
-			uart3_rts_n_pc0 {
-				nvidia,pins =	"uart3_rts_n_pc0";
-				nvidia,function = "pwm0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
-			uart3_cts_n_pa1 {
-				nvidia,pins =	"uart3_cts_n_pa1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis CAN1 on SPI6 */
-			spi2_cs0_n_px3 {
-				nvidia,pins =   "spi2_cs0_n_px3",
-						"spi2_miso_px1",
-						"spi2_mosi_px0",
-						"spi2_sck_px2";
-				nvidia,function = "spi6";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			/* CAN_INT1 */
-			spi2_cs1_n_pw2 {
-				nvidia,pins = "spi2_cs1_n_pw2";
-				nvidia,function = "spi3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis CAN2 on SPI4 */
-			gmi_a16_pj7 {
-				nvidia,pins =   "gmi_a16_pj7",
-						"gmi_a17_pb0",
-						"gmi_a18_pb1",
-						"gmi_a19_pk7";
-				nvidia,function = "spi4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			/* CAN_INT2 */
-			spi2_cs2_n_pw3 {
-				nvidia,pins = "spi2_cs2_n_pw3";
-				nvidia,function = "spi3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis I2C3 */
-			cam_i2c_scl_pbb1 {
-				nvidia,pins = "cam_i2c_scl_pbb1",
-					      "cam_i2c_sda_pbb2";
-				nvidia,function = "i2c3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis MMC1 */
-			sdmmc3_clk_pa6 {
-				nvidia,pins =	"sdmmc3_clk_pa6",
-						"sdmmc3_cmd_pa7";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_dat0_pb7 {
-				nvidia,pins =	"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4",
-						"sdmmc3_dat4_pd1",
-						"sdmmc3_dat5_pd0",
-						"sdmmc3_dat6_pd3",
-						"sdmmc3_dat7_pd4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			/* Apalis MMC1_CD# */
-			pv3 {
-				nvidia,pins = "pv3";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis PWM1 */
-			gpio_pu6 {
-				nvidia,pins =	"gpio_pu6";
-				nvidia,function = "pwm3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis PWM2 */
-			gpio_pu5 {
-				nvidia,pins =	"gpio_pu5";
-				nvidia,function = "pwm2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis PWM3 */
-			gpio_pu4 {
-				nvidia,pins =	"gpio_pu4";
-				nvidia,function = "pwm1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis PWM4 */
-			gpio_pu3 {
-				nvidia,pins =	"gpio_pu3";
-				nvidia,function = "pwm0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis RESET_MOCI# */
-			gmi_rst_n_pi4 {
-				nvidia,pins = "gmi_rst_n_pi4";
-				nvidia,function = "gmi";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis SD1 */
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins =	"sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			/* Apalis SD1_CD# */
-			clk2_req_pcc5 {
-				nvidia,pins = "clk2_req_pcc5";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis SPI1 */
-			spi1_sck_px5 {
-				nvidia,pins =   "spi1_sck_px5",
-						"spi1_mosi_px4",
-						"spi1_miso_px7",
-						"spi1_cs0_n_px6";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis SPI2 */
-			lcd_sck_pz4 {
-				nvidia,pins =   "lcd_sck_pz4",
-						"lcd_sdout_pn5",
-						"lcd_sdin_pz2",
-						"lcd_cs0_n_pn4";
-				nvidia,function = "spi5";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis UART1 */
-			ulpi_data0 {
-				nvidia,pins =   "ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis UART2 */
-			ulpi_clk_py0 {
-				nvidia,pins =   "ulpi_clk_py0",
-						"ulpi_dir_py1",
-						"ulpi_nxt_py2",
-						"ulpi_stp_py3";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis UART3 */
-			uart2_rxd_pc3 {
-				nvidia,pins =   "uart2_rxd_pc3",
-						"uart2_txd_pc2";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis UART4 */
-			uart3_rxd_pw7 {
-				nvidia,pins =   "uart3_rxd_pw7",
-						"uart3_txd_pw6";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis USBO1_EN */
-			gen2_i2c_scl_pt5 {
-				nvidia,pins = "gen2_i2c_scl_pt5";
-				nvidia,function = "rsvd4";
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Apalis USBO1_OC# */
-			gen2_i2c_sda_pt6 {
-				nvidia,pins = "gen2_i2c_sda_pt6";
-				nvidia,function = "rsvd4";
-				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Apalis WAKE1_MICO */
-			pv1 {
-				nvidia,pins = "pv1";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* eMMC (On-module) */
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* LVDS Transceiver Configuration */
-			pbb0 {
-				nvidia,pins =	"pbb0",
-						"pbb7",
-						"pcc1",
-						"pcc2";
-				nvidia,function = "rsvd2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-			pbb3 {
-				nvidia,pins =	"pbb3",
-						"pbb4",
-						"pbb5",
-						"pbb6";
-				nvidia,function = "displayb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Power I2C (On-module) */
-			pwr_i2c_scl_pz6 {
-				nvidia,pins = "pwr_i2c_scl_pz6",
-					      "pwr_i2c_sda_pz7";
-				nvidia,function = "i2cpwr";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-				nvidia,lock = <TEGRA_PIN_DISABLE>;
-				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-			};
-
-			/*
-			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
-			 * temperature sensor therefore requires disabling for
-			 * now
-			 */
-			lcd_dc1_pd2 {
-				nvidia,pins = "lcd_dc1_pd2";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* TOUCH_PEN_INT# */
-			pv0 {
-				nvidia,pins = "pv0";
-				nvidia,function = "rsvd1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-		};
-	};
-
-	hdmiddc: i2c@7000c700 {
-		clock-frequency = <100000>;
-	};
-
-	/*
-	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
-	 * touch screen controller
-	 */
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		pmic: tps65911@2d {
-			compatible = "ti,tps65911";
-			reg = <0x2d>;
-
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			vcc1-supply = <&sys_3v3_reg>;
-			vcc2-supply = <&sys_3v3_reg>;
-			vcc3-supply = <&vio_reg>;
-			vcc4-supply = <&sys_3v3_reg>;
-			vcc5-supply = <&sys_3v3_reg>;
-			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&charge_pump_5v0_reg>;
-			vccio-supply = <&sys_3v3_reg>;
-
-			regulators {
-				/* SW1: +V1.35_VDDIO_DDR */
-				vdd1_reg: vdd1 {
-					regulator-name = "vddio_ddr_1v35";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-				};
-
-				/* SW2: +V1.05 */
-				vdd2_reg: vdd2 {
-					regulator-name =
-						"vdd_pexa,vdd_pexb,vdd_sata";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				/* SW CTRL: +V1.0_VDD_CPU */
-				vddctrl_reg: vddctrl {
-					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-				};
-
-				/* SWIO: +V1.8 */
-				vio_reg: vio {
-					regulator-name = "vdd_1v8_gen";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				/* LDO1: unused */
-
-				/*
-				 * EN_+V3.3 switching via FET:
-				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
-				 * see also v3_3 fixed supply
-				 */
-				ldo2_reg: ldo2 {
-					regulator-name = "en_3v3";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				/* +V1.2_CSI */
-				ldo3_reg: ldo3 {
-					regulator-name =
-						"avdd_dsi_csi,pwrdet_mipi";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				/* +V1.2_VDD_RTC */
-				ldo4_reg: ldo4 {
-					regulator-name = "vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/*
-				 * +V2.8_AVDD_VDAC:
-				 * only required for analog RGB
-				 */
-				ldo5_reg: ldo5 {
-					regulator-name = "avdd_vdac";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				/*
-				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
-				 * but LDO6 can't set voltage in 50mV
-				 * granularity
-				 */
-				ldo6_reg: ldo6 {
-					regulator-name = "avdd_plle";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				/* +V1.2_AVDD_PLL */
-				ldo7_reg: ldo7 {
-					regulator-name = "avdd_pll";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/* +V1.0_VDD_DDR_HS */
-				ldo8_reg: ldo8 {
-					regulator-name = "vdd_ddr_hs";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		/* STMPE811 touch screen controller */
-		stmpe811@41 {
-			compatible = "st,stmpe811";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x41>;
-			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
-			interrupt-parent = <&gpio>;
-			interrupt-controller;
-			id = <0>;
-			blocks = <0x5>;
-			irq-trigger = <0x1>;
-
-			stmpe_touchscreen {
-				compatible = "st,stmpe-ts";
-				reg = <0>;
-				/* 3.25 MHz ADC clock speed */
-				st,adc-freq = <1>;
-				/* 8 sample average control */
-				st,ave-ctrl = <3>;
-				/* 7 length fractional part in z */
-				st,fraction-z = <7>;
-				/*
-				 * 50 mA typical 80 mA max touchscreen drivers
-				 * current limit value
-				 */
-				st,i-drive = <1>;
-				/* 12-bit ADC */
-				st,mod-12b = <1>;
-				/* internal ADC reference */
-				st,ref-sel = <0>;
-				/* ADC converstion time: 80 clocks */
-				st,sample-time = <4>;
-				/* 1 ms panel driver settling time */
-				st,settling = <3>;
-				/* 5 ms touch detect interrupt delay */
-				st,touch-det-delay = <5>;
-			};
-		};
-
-		/*
-		 * LM95245 temperature sensor
-		 * Note: OVERT_N directly connected to PMIC PWRDN
-		 */
-		temp-sensor@4c {
-			compatible = "national,lm95245";
-			reg = <0x4c>;
-		};
-
-		/* SW: +V1.2_VDD_CORE */
-		tps62362@60 {
-			compatible = "ti,tps62362";
-			reg = <0x60>;
-
-			regulator-name = "tps62362-vout";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
-		};
-	};
-
-	/* SPI4: CAN2 */
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <10000000>;
-
-		can@1 {
-			compatible = "microchip,mcp2515";
-			reg = <1>;
-			clocks = <&clk16m>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
-			spi-max-frequency = <10000000>;
-		};
-	};
-
-	/* SPI6: CAN1 */
-	spi@7000de00 {
-		status = "okay";
-		spi-max-frequency = <10000000>;
-
-		can@0 {
-			compatible = "microchip,mcp2515";
-			reg = <0>;
-			clocks = <&clk16m>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-			spi-max-frequency = <10000000>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <0>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clk@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-		clk16m: clk@1 {
-			compatible = "fixed-clock";
-			reg=<1>;
-			#clock-cells = <0>;
-			clock-frequency = <16000000>;
-			clock-output-names = "clk16m";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sys_3v3_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		charge_pump_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra30-beaver.dts b/src/arm/tegra30-beaver.dts
deleted file mode 100644
index cee8f2246fdb..000000000000
--- a/src/arm/tegra30-beaver.dts
+++ /dev/null
@@ -1,522 +0,0 @@
-/dts-v1/;
-
-#include "tegra30.dtsi"
-
-/ {
-	model = "NVIDIA Tegra30 Beaver evaluation board";
-	compatible = "nvidia,beaver", "nvidia,tegra30";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps65911@2d";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x80000000 0x7ff00000>;
-	};
-
-	pcie-controller@00003000 {
-		status = "okay";
-
-		avdd-pexa-supply = <&ldo1_reg>;
-		vdd-pexa-supply = <&ldo1_reg>;
-		avdd-pexb-supply = <&ldo1_reg>;
-		vdd-pexb-supply = <&ldo1_reg>;
-		avdd-pex-pll-supply = <&ldo1_reg>;
-		avdd-plle-supply = <&ldo1_reg>;
-		vddio-pex-ctl-supply = <&sys_3v3_reg>;
-		hvdd-pex-supply = <&sys_3v3_pexs_reg>;
-
-		pci@1,0 {
-			status = "okay";
-			nvidia,num-lanes = <2>;
-		};
-
-		pci@2,0 {
-			nvidia,num-lanes = <2>;
-		};
-
-		pci@3,0 {
-			status = "okay";
-			nvidia,num-lanes = <2>;
-		};
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-
-			hdmi-supply = <&vdd_5v0_hdmi>;
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
-
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-			nvidia,ddc-i2c-bus = <&hdmiddc>;
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins =	"sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins =	"sdmmc3_cmd_pa7",
-						"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dap2_fs_pa2 {
-				nvidia,pins =	"dap2_fs_pa2",
-						"dap2_sclk_pa3",
-						"dap2_din_pa4",
-						"dap2_dout_pa5";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			pex_l1_prsnt_n_pdd4 {
-				nvidia,pins =	"pex_l1_prsnt_n_pdd4",
-						"pex_l1_clkreq_n_pdd6";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-			sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <46>;
-				nvidia,pull-up-strength = <42>;
-				nvidia,slew-rate-rising = <1>;
-				nvidia,slew-rate-falling = <1>;
-			};
-			gpv {
-				nvidia,pins = "drive_gpv";
-				nvidia,pull-up-strength = <16>;
-			};
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	hdmiddc: i2c@7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		rt5640: rt5640@1c {
-			compatible = "realtek,rt5640";
-			reg = <0x1c>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
-			realtek,ldo1-en-gpios =
-				<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
-		};
-
-		pmic: tps65911@2d {
-			compatible = "ti,tps65911";
-			reg = <0x2d>;
-
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			vcc1-supply = <&vdd_5v_in_reg>;
-			vcc2-supply = <&vdd_5v_in_reg>;
-			vcc3-supply = <&vio_reg>;
-			vcc4-supply = <&vdd_5v_in_reg>;
-			vcc5-supply = <&vdd_5v_in_reg>;
-			vcc6-supply = <&vdd2_reg>;
-			vcc7-supply = <&vdd_5v_in_reg>;
-			vccio-supply = <&vdd_5v_in_reg>;
-
-			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				vdd1_reg: vdd1 {
-					regulator-name = "vddio_ddr_1v2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				vdd2_reg: vdd2 {
-					regulator-name = "vdd_1v5_gen";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-				};
-
-				vddctrl_reg: vddctrl {
-					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				vio_reg: vio {
-					regulator-name = "vdd_1v8_gen";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo1_reg: ldo1 {
-					regulator-name = "vdd_pexa,vdd_pexb";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				ldo2_reg: ldo2 {
-					regulator-name = "vdd_sata,avdd_plle";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				/* LDO3 is not connected to anything */
-
-				ldo4_reg: ldo4 {
-					regulator-name = "vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: ldo5 {
-					regulator-name = "vddio_sdmmc,avdd_vdac";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: ldo6 {
-					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo7_reg: ldo7 {
-					regulator-name = "vdd_pllm,x,u,a_p_c_s";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: ldo8 {
-					regulator-name = "vdd_ddr_hs";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		tps62361@60 {
-			compatible = "ti,tps62361";
-			reg = <0x60>;
-
-			regulator-name = "tps62361-vout";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-high;
-			ti,vsel1-state-high;
-		};
-	};
-
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spi-flash@1 {
-			compatible = "winbond,w25q32";
-			reg = <1>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-
-	pmc@7000e400 {
-		status = "okay";
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <200>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <0>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	ahub@70080000 {
-		i2s@70080400 {
-			status = "okay";
-		};
-	};
-
-	sdhci@78000000 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	usb@7d004000 {
-		status = "okay";
-	};
-
-	phy2: usb-phy@7d004000 {
-		vbus-supply = <&sys_3v3_reg>;
-		status = "okay";
-	};
-
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		vbus-supply = <&usb3_vbus_reg>;
-		status = "okay";
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		gpled1 {
-			label = "LED1"; /* CR5A1 (blue) */
-			gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
-		};
-		gpled2 {
-			label = "LED2"; /* CR4A2 (green) */
-			gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v_in_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v_in";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		chargepump_5v_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "chargepump_5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			enable-active-high;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		ddr_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_ddr";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
-
-		vdd_5v_sata_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_5v_sata";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
-
-		usb1_vbus_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
-
-		usb3_vbus_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "usb3_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
-
-		sys_3v3_reg: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "sys_3v3,vdd_3v3_alw";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
-
-		sys_3v3_pexs_reg: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "sys_3v3_pexs";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_5v0_hdmi: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+VDD_5V_HDMI";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&sys_3v3_reg>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-rt5640-beaver",
-			     "nvidia,tegra-audio-rt5640";
-		nvidia,model = "NVIDIA Tegra Beaver";
-
-		nvidia,audio-routing =
-			"Headphones", "HPOR",
-			"Headphones", "HPOL",
-			"Mic Jack", "MICBIAS1",
-			"IN2P", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&rt5640>;
-
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
-			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra30-cardhu-a02.dts b/src/arm/tegra30-cardhu-a02.dts
deleted file mode 100644
index c9bfedcca6ed..000000000000
--- a/src/arm/tegra30-cardhu-a02.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-/dts-v1/;
-
-#include "tegra30-cardhu.dtsi"
-
-/* This dts file support the cardhu A02 version of board */
-
-/ {
-	model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
-	compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
-
-	sdhci@78000400 {
-		status = "okay";
-		power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		keep-power-in-suspend;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ddr_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vdd_ddr";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		sys_3v3_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "sys_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb1_vbus_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-
-		usb3_vbus_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "usb3_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-
-		vdd_5v0_reg: regulator@104 {
-			compatible = "regulator-fixed";
-			reg = <104>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-		};
-
-		vdd_bl_reg: regulator@105 {
-			compatible = "regulator-fixed";
-			reg = <105>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
diff --git a/src/arm/tegra30-cardhu-a04.dts b/src/arm/tegra30-cardhu-a04.dts
deleted file mode 100644
index fadf55e46b2b..000000000000
--- a/src/arm/tegra30-cardhu-a04.dts
+++ /dev/null
@@ -1,105 +0,0 @@
-/dts-v1/;
-
-#include "tegra30-cardhu.dtsi"
-
-/* This dts file support the cardhu A04 and later versions of board */
-
-/ {
-	model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
-	compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
-
-	sdhci@78000400 {
-		status = "okay";
-		power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-		keep-power-in-suspend;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ddr_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			regulator-name = "ddr";
-			reg = <100>;
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		sys_3v3_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "sys_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-		};
-
-		usb1_vbus_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-
-		usb3_vbus_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "usb3_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-
-		vdd_5v0_reg: regulator@104 {
-			compatible = "regulator-fixed";
-			reg = <104>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		vdd_bl_reg: regulator@105 {
-			compatible = "regulator-fixed";
-			reg = <105>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
-		};
-
-		vdd_bl2_reg: regulator@106 {
-			compatible = "regulator-fixed";
-			reg = <106>;
-			regulator-name = "vdd_bl2";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/src/arm/tegra30-cardhu.dtsi b/src/arm/tegra30-cardhu.dtsi
deleted file mode 100644
index 206379546244..000000000000
--- a/src/arm/tegra30-cardhu.dtsi
+++ /dev/null
@@ -1,616 +0,0 @@
-#include "tegra30.dtsi"
-
-/**
- * This file contains common DT entry for all fab version of Cardhu.
- * There is multiple fab version of Cardhu starting from A01 to A07.
- * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
- * A02 will have different sets of GPIOs for fixed regulator compare to
- * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
- * compatible with fab version A04. Based on Cardhu fab version, the
- * related dts file need to be chosen like for Cardhu fab version A02,
- * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
- * tegra30-cardhu-a04.dts.
- * The identification of board is done in two ways, by looking the sticker
- * on PCB and by reading board id eeprom.
- * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
- * number is the fab version like here it is 002 and hence fab version A02.
- * The (downstream internal) U-Boot of Cardhu display the board-id as
- * follows:
- * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
- * In this Fab version is 02 i.e. A02.
- * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
- * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
- * wide.
- */
-
-/ {
-	model = "NVIDIA Tegra30 Cardhu evaluation board";
-	compatible = "nvidia,cardhu", "nvidia,tegra30";
-
-	aliases {
-		rtc0 = "/i2c@7000d000/tps65911@2d";
-		rtc1 = "/rtc@7000e000";
-	};
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	pcie-controller@00003000 {
-		status = "okay";
-
-		/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
-		avdd-pexb-supply = <&ldo1_reg>;
-		vdd-pexb-supply = <&ldo1_reg>;
-		avdd-pex-pll-supply = <&ldo1_reg>;
-		hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
-		vddio-pex-ctl-supply = <&sys_3v3_reg>;
-		avdd-plle-supply = <&ldo2_reg>;
-
-		pci@1,0 {
-			nvidia,num-lanes = <4>;
-		};
-
-		pci@2,0 {
-			nvidia,num-lanes = <1>;
-		};
-
-		pci@3,0 {
-			status = "okay";
-			nvidia,num-lanes = <1>;
-		};
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				nvidia,panel = <&panel>;
-			};
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			sdmmc1_clk_pz0 {
-				nvidia,pins = "sdmmc1_clk_pz0";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc1_cmd_pz1 {
-				nvidia,pins =	"sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
-				nvidia,function = "sdmmc1";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_clk_pa6 {
-				nvidia,pins = "sdmmc3_clk_pa6";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_cmd_pa7 {
-				nvidia,pins =	"sdmmc3_cmd_pa7",
-						"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4";
-				nvidia,function = "sdmmc3";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			dap2_fs_pa2 {
-				nvidia,pins =	"dap2_fs_pa2",
-						"dap2_sclk_pa3",
-						"dap2_din_pa4",
-						"dap2_dout_pa5";
-				nvidia,function = "i2s1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdio3 {
-				nvidia,pins = "drive_sdio3";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,pull-down-strength = <46>;
-				nvidia,pull-up-strength = <42>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
-			};
-			uart3_txd_pw6 {
-				nvidia,pins =	"uart3_txd_pw6",
-						"uart3_cts_n_pa1",
-						"uart3_rts_n_pc0",
-						"uart3_rxd_pw7";
-				nvidia,function = "uartc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006200 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	panelddc: i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		/* ALS and Proximity sensor */
-		isl29028@44 {
-			compatible = "isil,isl29028";
-			reg = <0x44>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		i2cmux@70 {
-			compatible = "nxp,pca9546";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x70>;
-		};
-	};
-
-	i2c@7000c700 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-		};
-
-		pmic: tps65911@2d {
-			compatible = "ti,tps65911";
-			reg = <0x2d>;
-
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			vcc1-supply = <&vdd_ac_bat_reg>;
-			vcc2-supply = <&vdd_ac_bat_reg>;
-			vcc3-supply = <&vio_reg>;
-			vcc4-supply = <&vdd_5v0_reg>;
-			vcc5-supply = <&vdd_ac_bat_reg>;
-			vcc6-supply = <&vdd2_reg>;
-			vcc7-supply = <&vdd_ac_bat_reg>;
-			vccio-supply = <&vdd_ac_bat_reg>;
-
-			regulators {
-				vdd1_reg: vdd1 {
-					regulator-name = "vddio_ddr_1v2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				vdd2_reg: vdd2 {
-					regulator-name = "vdd_1v5_gen";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-				};
-
-				vddctrl_reg: vddctrl {
-					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				vio_reg: vio {
-					regulator-name = "vdd_1v8_gen";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo1_reg: ldo1 {
-					regulator-name = "vdd_pexa,vdd_pexb";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				ldo2_reg: ldo2 {
-					regulator-name = "vdd_sata,avdd_plle";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-				};
-
-				/* LDO3 is not connected to anything */
-
-				ldo4_reg: ldo4 {
-					regulator-name = "vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: ldo5 {
-					regulator-name = "vddio_sdmmc,avdd_vdac";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: ldo6 {
-					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo7_reg: ldo7 {
-					regulator-name = "vdd_pllm,x,u,a_p_c_s";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: ldo8 {
-					regulator-name = "vdd_ddr_hs";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-			vcc-supply = <&sys_3v3_reg>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
-		};
-
-		tps62361@60 {
-			compatible = "ti,tps62361";
-			reg = <0x60>;
-
-			regulator-name = "tps62361-vout";
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-high;
-			ti,vsel1-state-high;
-		};
-	};
-
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		spi-flash@1 {
-			compatible = "winbond,w25q32";
-			reg = <1>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-
-	pmc@7000e400 {
-		status = "okay";
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <200>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <0>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	ahub@70080000 {
-		i2s@70080400 {
-			status = "okay";
-		};
-	};
-
-	sdhci@78000000 {
-		status = "okay";
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
-		bus-width = <4>;
-	};
-
-	sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		vbus-supply = <&usb3_vbus_reg>;
-		status = "okay";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_bl_reg>;
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	panel: panel {
-		compatible = "chunghwa,claa101wb01", "simple-panel";
-		ddc-i2c-bus = <&panelddc>;
-
-		power-supply = <&vdd_pnl1_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_ac_bat_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_ac_bat";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		cam_1v8_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "cam_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vio_reg>;
-		};
-
-		cp_5v_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "cp_5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			enable-active-high;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		emmc_3v3_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "emmc_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		modem_3v3_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "modem_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
-		};
-
-		pex_hvdd_3v3_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "pex_hvdd_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_cam1_ldo_reg: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "vdd_cam1_ldo";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_cam2_ldo_reg: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "vdd_cam2_ldo";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_cam3_ldo_reg: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "vdd_cam3_ldo";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_com_reg: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "vdd_com";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_fuse_3v3_reg: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "vdd_fuse_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_pnl1_reg: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "vdd_pnl1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
-
-		vdd_vid_reg: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "vddio_vid";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-cardhu",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "NVIDIA Tegra Cardhu";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
-
-		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
-			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA30_CLK_EXTERN1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-};
diff --git a/src/arm/tegra30-colibri-eval-v3.dts b/src/arm/tegra30-colibri-eval-v3.dts
deleted file mode 100644
index 7793abd5bef1..000000000000
--- a/src/arm/tegra30-colibri-eval-v3.dts
+++ /dev/null
@@ -1,205 +0,0 @@
-/dts-v1/;
-
-#include "tegra30-colibri.dtsi"
-
-/ {
-	model = "Toradex Colibri T30 on Colibri Evaluation Board";
-	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
-
-	aliases {
-		rtc0 = "/i2c@7000c000/rtc@68";
-		rtc1 = "/i2c@7000d000/tps65911@2d";
-		rtc2 = "/rtc@7000e000";
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-				nvidia,panel = <&panel>;
-			};
-		};
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006040 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	serial@70006300 {
-		compatible = "nvidia,tegra30-hsuart";
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	/*
-	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
-	 * board)
-	 */
-	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		/* M41T0M6 real time clock on carrier board */
-		rtc@68 {
-			compatible = "stm,m41t00";
-			reg = <0x68>;
-		};
-	};
-
-	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
-	hdmiddc: i2c@7000c700 {
-		status = "okay";
-	};
-
-	/* SPI1: Colibri SSP */
-	spi@7000d400 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-		can0: can@0 {
-			compatible = "microchip,mcp2515";
-			reg = <0>;
-			clocks = <&clk16m>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
-			spi-max-frequency = <10000000>;
-		};
-		spidev0: spi@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <25000000>;
-		};
-	};
-
-	sdhci@78000200 {
-		status = "okay";
-		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
-		no-1-8-v;
-	};
-
-	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
-	usb@7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-		dr_mode = "otg";
-		vbus-supply = <&usbc_vbus_reg>;
-	};
-
-	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		vbus-supply = <&usbh_vbus_reg>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		/* PWM<A> */
-		pwms = <&pwm 0 5000000>;
-		brightness-levels = <255 128 64 32 16 8 4 0>;
-		default-brightness-level = <6>;
-		/* BL_ON */
-		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	clocks {
-		clk16m: clk@1 {
-			compatible = "fixed-clock";
-			reg=<1>;
-			#clock-cells = <0>;
-			clock-frequency = <16000000>;
-			clock-output-names = "clk16m";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu", "simple-panel";
-
-		backlight = <&backlight>;
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		pwmb {
-			label = "PWM<B>";
-			pwms = <&pwm 1 19600>;
-			max-brightness = <255>;
-		};
-		pwmc {
-			label = "PWM<C>";
-			pwms = <&pwm 2 19600>;
-			max-brightness = <255>;
-		};
-		pwmd {
-			label = "PWM<D>";
-			pwms = <&pwm 3 19600>;
-			max-brightness = <255>;
-		};
-	};
-
-	regulators {
-		sys_5v0_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-
-		usbc_vbus_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usbc_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			vin-supply = <&sys_5v0_reg>;
-		};
-
-		/* USBH_PEN */
-		usbh_vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usbh_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-			vin-supply = <&sys_5v0_reg>;
-		};
-	};
-};
diff --git a/src/arm/tegra30-colibri.dtsi b/src/arm/tegra30-colibri.dtsi
deleted file mode 100644
index c4ed1bec4d92..000000000000
--- a/src/arm/tegra30-colibri.dtsi
+++ /dev/null
@@ -1,386 +0,0 @@
-#include <dt-bindings/input/input.h>
-#include "tegra30.dtsi"
-
-/*
- * Toradex Colibri T30 Device Tree
- * Compatible for Revisions 1.1B/1.1C/1.1D
- */
-/ {
-	model = "Toradex Colibri T30";
-	compatible = "toradex,colibri_t30", "nvidia,tegra30";
-
-	memory {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
-
-			nvidia,hpd-gpio =
-				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
-			nvidia,ddc-i2c-bus = <&hdmiddc>;
-		};
-	};
-
-	pinmux@70000868 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			/* Colibri BL_ON */
-			pv2 {
-				nvidia,pins = "pv2";
-				nvidia,function = "rsvd4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Colibri Backlight PWM<A> */
-			sdmmc3_dat3_pb4 {
-				nvidia,pins =	"sdmmc3_dat3_pb4";
-				nvidia,function = "pwm0";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Colibri CAN_INT */
-			kb_row8_ps0 {
-				nvidia,pins = "kb_row8_ps0";
-				nvidia,function = "kbc";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/*
-			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
-			 * todays display need DE, disable LCD_M1
-			 */
-			lcd_m1_pw1 {
-				nvidia,pins = "lcd_m1_pw1";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Thermal alert, need to be disabled */
-			lcd_dc1_pd2 {
-				nvidia,pins = "lcd_dc1_pd2";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Colibri MMC */
-			kb_row10_ps2 {
-				nvidia,pins = "kb_row10_ps2";
-				nvidia,function = "sdmmc2";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			kb_row11_ps3 {
-				nvidia,pins =	"kb_row11_ps3",
-						"kb_row12_ps4",
-						"kb_row13_ps5",
-						"kb_row14_ps6",
-						"kb_row15_ps7";
-				nvidia,function = "sdmmc2";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Colibri SSP */
-			ulpi_clk_py0 {
-				nvidia,pins =   "ulpi_clk_py0",
-						"ulpi_dir_py1",
-						"ulpi_nxt_py2",
-						"ulpi_stp_py3";
-				nvidia,function = "spi1";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc3_dat6_pd3 {
-				nvidia,pins =	"sdmmc3_dat6_pd3",
-						"sdmmc3_dat7_pd4";
-				nvidia,function = "spdif";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			/* Colibri UART_A */
-			ulpi_data0 {
-				nvidia,pins =   "ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
-				nvidia,function = "uarta";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Colibri UART_B */
-			gmi_a16_pj7 {
-				nvidia,pins =   "gmi_a16_pj7",
-						"gmi_a17_pb0",
-						"gmi_a18_pb1",
-						"gmi_a19_pk7";
-				nvidia,function = "uartd";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* Colibri UART_C */
-			uart2_rxd {
-				nvidia,pins =   "uart2_rxd_pc3",
-						"uart2_txd_pc2";
-				nvidia,function = "uartb";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			/* eMMC */
-			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
-				nvidia,function = "sdmmc4";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	hdmiddc: i2c@7000c700 {
-		clock-frequency = <100000>;
-	};
-
-	/*
-	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
-	 * touch screen controller
-	 */
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <100000>;
-
-		pmic: tps65911@2d {
-			compatible = "ti,tps65911";
-			reg = <0x2d>;
-
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			vcc1-supply = <&sys_3v3_reg>;
-			vcc2-supply = <&sys_3v3_reg>;
-			vcc3-supply = <&vio_reg>;
-			vcc4-supply = <&sys_3v3_reg>;
-			vcc5-supply = <&sys_3v3_reg>;
-			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&charge_pump_5v0_reg>;
-			vccio-supply = <&sys_3v3_reg>;
-
-			regulators {
-				/* SW1: +V1.35_VDDIO_DDR */
-				vdd1_reg: vdd1 {
-					regulator-name = "vddio_ddr_1v35";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-				};
-
-				/* SW2: unused */
-
-				/* SW CTRL: +V1.0_VDD_CPU */
-				vddctrl_reg: vddctrl {
-					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-				};
-
-				/* SWIO: +V1.8 */
-				vio_reg: vio {
-					regulator-name = "vdd_1v8_gen";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				/* LDO1: unused */
-
-				/*
-				 * EN_+V3.3 switching via FET:
-				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
-				 * see also v3_3 fixed supply
-				 */
-				ldo2_reg: ldo2 {
-					regulator-name = "en_3v3";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				/* LDO3: unused */
-
-				/* +V1.2_VDD_RTC */
-				ldo4_reg: ldo4 {
-					regulator-name = "vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/*
-				 * +V2.8_AVDD_VDAC:
-				 * only required for analog RGB
-				 */
-				ldo5_reg: ldo5 {
-					regulator-name = "avdd_vdac";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				/*
-				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
-				 * but LDO6 can't set voltage in 50mV
-				 * granularity
-				 */
-				ldo6_reg: ldo6 {
-					regulator-name = "avdd_plle";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				/* +V1.2_AVDD_PLL */
-				ldo7_reg: ldo7 {
-					regulator-name = "avdd_pll";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/* +V1.0_VDD_DDR_HS */
-				ldo8_reg: ldo8 {
-					regulator-name = "vdd_ddr_hs";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		/*
-		 * LM95245 temperature sensor
-		 * Note: OVERT_N directly connected to PMIC PWRDN
-		 */
-		temp-sensor@4c {
-			compatible = "national,lm95245";
-			reg = <0x4c>;
-		};
-
-		/* SW: +V1.2_VDD_CORE */
-		tps62362@60 {
-			compatible = "ti,tps62362";
-			reg = <0x60>;
-
-			regulator-name = "tps62362-vout";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-boot-on;
-			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <5000>;
-		nvidia,cpu-pwr-off-time = <5000>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <0>;
-		nvidia,core-power-req-active-high;
-		nvidia,sys-clock-req-active-high;
-	};
-
-	emmc: sdhci@78000600 {
-		status = "okay";
-		bus-width = <8>;
-		non-removable;
-	};
-
-	/* EHCI instance 1: USB2_DP/N -> AX88772B */
-	usb@7d004000 {
-		status = "okay";
-	};
-
-	usb-phy@7d004000 {
-		status = "okay";
-		nvidia,is-wired = <1>;
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clk@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sys_3v3_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		charge_pump_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/src/arm/tegra30.dtsi b/src/arm/tegra30.dtsi
deleted file mode 100644
index 6b35c29278d7..000000000000
--- a/src/arm/tegra30.dtsi
+++ /dev/null
@@ -1,918 +0,0 @@
-#include <dt-bindings/clock/tegra30-car.h>
-#include <dt-bindings/gpio/tegra-gpio.h>
-#include <dt-bindings/pinctrl/pinctrl-tegra.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "nvidia,tegra30";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartb;
-		serial2 = &uartc;
-		serial3 = &uartd;
-		serial4 = &uarte;
-	};
-
-	pcie-controller@00003000 {
-		compatible = "nvidia,tegra30-pcie";
-		device_type = "pci";
-		reg = <0x00003000 0x00000800   /* PADS registers */
-		       0x00003800 0x00000200   /* AFI registers */
-		       0x10000000 0x10000000>; /* configuration space */
-		reg-names = "pads", "afi", "cs";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
-			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
-		interrupt-names = "intr", "msi";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-
-		bus-range = <0x00 0xff>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
-			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
-			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x20000000 0x20000000 0 0x08000000   /* non-prefetchable memory */
-			  0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
-
-		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
-			 <&tegra_car TEGRA30_CLK_AFI>,
-			 <&tegra_car TEGRA30_CLK_PLL_E>,
-			 <&tegra_car TEGRA30_CLK_CML0>;
-		clock-names = "pex", "afi", "pll_e", "cml";
-		resets = <&tegra_car 70>,
-		         <&tegra_car 72>,
-		         <&tegra_car 74>;
-		reset-names = "pex", "afi", "pcie_x";
-		status = "disabled";
-
-		pci@1,0 {
-			device_type = "pci";
-			assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
-			reg = <0x000800 0 0 0 0>;
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-
-			nvidia,num-lanes = <2>;
-		};
-
-		pci@2,0 {
-			device_type = "pci";
-			assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
-			reg = <0x001000 0 0 0 0>;
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-
-			nvidia,num-lanes = <2>;
-		};
-
-		pci@3,0 {
-			device_type = "pci";
-			assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
-			reg = <0x001800 0 0 0 0>;
-			status = "disabled";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-			ranges;
-
-			nvidia,num-lanes = <2>;
-		};
-	};
-
-	host1x@50000000 {
-		compatible = "nvidia,tegra30-host1x", "simple-bus";
-		reg = <0x50000000 0x00024000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
-			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
-		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x54000000 0x54000000 0x04000000>;
-
-		mpe@54040000 {
-			compatible = "nvidia,tegra30-mpe";
-			reg = <0x54040000 0x00040000>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_MPE>;
-			resets = <&tegra_car 60>;
-			reset-names = "mpe";
-		};
-
-		vi@54080000 {
-			compatible = "nvidia,tegra30-vi";
-			reg = <0x54080000 0x00040000>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_VI>;
-			resets = <&tegra_car 20>;
-			reset-names = "vi";
-		};
-
-		epp@540c0000 {
-			compatible = "nvidia,tegra30-epp";
-			reg = <0x540c0000 0x00040000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_EPP>;
-			resets = <&tegra_car 19>;
-			reset-names = "epp";
-		};
-
-		isp@54100000 {
-			compatible = "nvidia,tegra30-isp";
-			reg = <0x54100000 0x00040000>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_ISP>;
-			resets = <&tegra_car 23>;
-			reset-names = "isp";
-		};
-
-		gr2d@54140000 {
-			compatible = "nvidia,tegra30-gr2d";
-			reg = <0x54140000 0x00040000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
-		};
-
-		gr3d@54180000 {
-			compatible = "nvidia,tegra30-gr3d";
-			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car TEGRA30_CLK_GR3D
-				  &tegra_car TEGRA30_CLK_GR3D2>;
-			clock-names = "3d", "3d2";
-			resets = <&tegra_car 24>,
-			         <&tegra_car 98>;
-			reset-names = "3d", "3d2";
-		};
-
-		dc@54200000 {
-			compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc";
-			reg = <0x54200000 0x00040000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
-				 <&tegra_car TEGRA30_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			nvidia,head = <0>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		dc@54240000 {
-			compatible = "nvidia,tegra30-dc";
-			reg = <0x54240000 0x00040000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_DISP2>,
-				 <&tegra_car TEGRA30_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			nvidia,head = <1>;
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		hdmi@54280000 {
-			compatible = "nvidia,tegra30-hdmi";
-			reg = <0x54280000 0x00040000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_HDMI>,
-				 <&tegra_car TEGRA30_CLK_PLL_D2_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		tvo@542c0000 {
-			compatible = "nvidia,tegra30-tvo";
-			reg = <0x542c0000 0x00040000>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA30_CLK_TVO>;
-			status = "disabled";
-		};
-
-		dsi@54300000 {
-			compatible = "nvidia,tegra30-dsi";
-			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA30_CLK_DSIA>;
-			resets = <&tegra_car 48>;
-			reset-names = "dsi";
-			status = "disabled";
-		};
-	};
-
-	timer@50004600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x50040600 0x20>;
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		clocks = <&tegra_car TEGRA30_CLK_TWD>;
-	};
-
-	intc: interrupt-controller@50041000 {
-		compatible = "arm,cortex-a9-gic";
-		reg = <0x50041000 0x1000
-		       0x50040100 0x0100>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-	};
-
-	cache-controller@50043000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x50043000 0x1000>;
-		arm,data-latency = <6 6 2>;
-		arm,tag-latency = <5 5 2>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	timer@60005000 {
-		compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
-		reg = <0x60005000 0x400>;
-		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_TIMER>;
-	};
-
-	tegra_car: clock@60006000 {
-		compatible = "nvidia,tegra30-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	apbdma: dma@6000a000 {
-		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
-		reg = <0x6000a000 0x1400>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
-		resets = <&tegra_car 34>;
-		reset-names = "dma";
-		#dma-cells = <1>;
-	};
-
-	ahb: ahb@6000c004 {
-		compatible = "nvidia,tegra30-ahb";
-		reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
-	};
-
-	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra30-gpio";
-		reg = <0x6000d000 0x1000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	apbmisc@70000800 {
-		compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64   /* Chip revision */
-		       0x70000008 0x04>; /* Strapping options */
-	};
-
-	pinmux: pinmux@70000868 {
-		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd4    /* Pad control registers */
-		       0x70003000 0x3e4>; /* Mux registers */
-	};
-
-	/*
-	 * There are two serial driver i.e. 8250 based simple serial
-	 * driver and APB DMA based serial driver for higher baudrate
-	 * and performace. To enable the 8250 based driver, the compatible
-	 * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable
-	 * the APB DMA based serial driver, the comptible is
-	 * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
-	 */
-	uarta: serial@70006000 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006000 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
-		resets = <&tegra_car 6>;
-		reset-names = "serial";
-		dmas = <&apbdma 8>, <&apbdma 8>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartb: serial@70006040 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006040 0x40>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
-		resets = <&tegra_car 7>;
-		reset-names = "serial";
-		dmas = <&apbdma 9>, <&apbdma 9>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartc: serial@70006200 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006200 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
-		resets = <&tegra_car 55>;
-		reset-names = "serial";
-		dmas = <&apbdma 10>, <&apbdma 10>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uartd: serial@70006300 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006300 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
-		resets = <&tegra_car 65>;
-		reset-names = "serial";
-		dmas = <&apbdma 19>, <&apbdma 19>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	uarte: serial@70006400 {
-		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
-		reg = <0x70006400 0x100>;
-		reg-shift = <2>;
-		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
-		resets = <&tegra_car 66>;
-		reset-names = "serial";
-		dmas = <&apbdma 20>, <&apbdma 20>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	pwm: pwm@7000a000 {
-		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
-		reg = <0x7000a000 0x100>;
-		#pwm-cells = <2>;
-		clocks = <&tegra_car TEGRA30_CLK_PWM>;
-		resets = <&tegra_car 17>;
-		reset-names = "pwm";
-		status = "disabled";
-	};
-
-	rtc@7000e000 {
-		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_RTC>;
-	};
-
-	i2c@7000c000 {
-		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_I2C1>,
-			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 21>, <&apbdma 21>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c400 {
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000c400 0x100>;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_I2C2>,
-			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 54>;
-		reset-names = "i2c";
-		dmas = <&apbdma 22>, <&apbdma 22>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c500 {
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000c500 0x100>;
-		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_I2C3>,
-			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 67>;
-		reset-names = "i2c";
-		dmas = <&apbdma 23>, <&apbdma 23>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000c700 {
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000c700 0x100>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_I2C4>,
-			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
-		resets = <&tegra_car 103>;
-		reset-names = "i2c";
-		clock-names = "div-clk", "fast-clk";
-		dmas = <&apbdma 26>, <&apbdma 26>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	i2c@7000d000 {
-		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
-		reg = <0x7000d000 0x100>;
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_I2C5>,
-			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 47>;
-		reset-names = "i2c";
-		dmas = <&apbdma 24>, <&apbdma 24>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d400 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000d400 0x200>;
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC1>;
-		resets = <&tegra_car 41>;
-		reset-names = "spi";
-		dmas = <&apbdma 15>, <&apbdma 15>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d600 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000d600 0x200>;
-		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC2>;
-		resets = <&tegra_car 44>;
-		reset-names = "spi";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000d800 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000d800 0x200>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC3>;
-		resets = <&tegra_car 46>;
-		reset-names = "spi";
-		dmas = <&apbdma 17>, <&apbdma 17>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000da00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000da00 0x200>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC4>;
-		resets = <&tegra_car 68>;
-		reset-names = "spi";
-		dmas = <&apbdma 18>, <&apbdma 18>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000dc00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000dc00 0x200>;
-		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC5>;
-		resets = <&tegra_car 104>;
-		reset-names = "spi";
-		dmas = <&apbdma 27>, <&apbdma 27>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	spi@7000de00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-		reg = <0x7000de00 0x200>;
-		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car TEGRA30_CLK_SBC6>;
-		resets = <&tegra_car 106>;
-		reset-names = "spi";
-		dmas = <&apbdma 28>, <&apbdma 28>;
-		dma-names = "rx", "tx";
-		status = "disabled";
-	};
-
-	kbc@7000e200 {
-		compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
-		reg = <0x7000e200 0x100>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_KBC>;
-		resets = <&tegra_car 36>;
-		reset-names = "kbc";
-		status = "disabled";
-	};
-
-	pmc@7000e400 {
-		compatible = "nvidia,tegra30-pmc";
-		reg = <0x7000e400 0x400>;
-		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
-		clock-names = "pclk", "clk32k_in";
-	};
-
-	memory-controller@7000f000 {
-		compatible = "nvidia,tegra30-mc";
-		reg = <0x7000f000 0x010
-		       0x7000f03c 0x1b4
-		       0x7000f200 0x028
-		       0x7000f284 0x17c>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	iommu@7000f010 {
-		compatible = "nvidia,tegra30-smmu";
-		reg = <0x7000f010 0x02c
-		       0x7000f1f0 0x010
-		       0x7000f228 0x05c>;
-		nvidia,#asids = <4>;		/* # of ASIDs */
-		dma-window = <0 0x40000000>;	/* IOVA start & length */
-		nvidia,ahb = <&ahb>;
-	};
-
-	fuse@7000f800 {
-		compatible = "nvidia,tegra30-efuse";
-		reg = <0x7000f800 0x400>;
-		clocks = <&tegra_car TEGRA30_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-	ahub@70080000 {
-		compatible = "nvidia,tegra30-ahub";
-		reg = <0x70080000 0x200
-		       0x70080200 0x100>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
-			 <&tegra_car TEGRA30_CLK_APBIF>;
-		clock-names = "d_audio", "apbif";
-		resets = <&tegra_car 106>, /* d_audio */
-			 <&tegra_car 107>, /* apbif */
-			 <&tegra_car 30>,  /* i2s0 */
-			 <&tegra_car 11>,  /* i2s1 */
-			 <&tegra_car 18>,  /* i2s2 */
-			 <&tegra_car 101>, /* i2s3 */
-			 <&tegra_car 102>, /* i2s4 */
-			 <&tegra_car 108>, /* dam0 */
-			 <&tegra_car 109>, /* dam1 */
-			 <&tegra_car 110>, /* dam2 */
-			 <&tegra_car 10>;  /* spdif */
-		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
-			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
-			      "spdif";
-		dmas = <&apbdma 1>, <&apbdma 1>,
-		       <&apbdma 2>, <&apbdma 2>,
-		       <&apbdma 3>, <&apbdma 3>,
-		       <&apbdma 4>, <&apbdma 4>;
-		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
-			    "rx3", "tx3";
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		tegra_i2s0: i2s@70080300 {
-			compatible = "nvidia,tegra30-i2s";
-			reg = <0x70080300 0x100>;
-			nvidia,ahub-cif-ids = <4 4>;
-			clocks = <&tegra_car TEGRA30_CLK_I2S0>;
-			resets = <&tegra_car 30>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s1: i2s@70080400 {
-			compatible = "nvidia,tegra30-i2s";
-			reg = <0x70080400 0x100>;
-			nvidia,ahub-cif-ids = <5 5>;
-			clocks = <&tegra_car TEGRA30_CLK_I2S1>;
-			resets = <&tegra_car 11>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s2: i2s@70080500 {
-			compatible = "nvidia,tegra30-i2s";
-			reg = <0x70080500 0x100>;
-			nvidia,ahub-cif-ids = <6 6>;
-			clocks = <&tegra_car TEGRA30_CLK_I2S2>;
-			resets = <&tegra_car 18>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s3: i2s@70080600 {
-			compatible = "nvidia,tegra30-i2s";
-			reg = <0x70080600 0x100>;
-			nvidia,ahub-cif-ids = <7 7>;
-			clocks = <&tegra_car TEGRA30_CLK_I2S3>;
-			resets = <&tegra_car 101>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-
-		tegra_i2s4: i2s@70080700 {
-			compatible = "nvidia,tegra30-i2s";
-			reg = <0x70080700 0x100>;
-			nvidia,ahub-cif-ids = <8 8>;
-			clocks = <&tegra_car TEGRA30_CLK_I2S4>;
-			resets = <&tegra_car 102>;
-			reset-names = "i2s";
-			status = "disabled";
-		};
-	};
-
-	sdhci@78000000 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000000 0x200>;
-		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
-		resets = <&tegra_car 14>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000200 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000200 0x200>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
-		resets = <&tegra_car 9>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000400 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000400 0x200>;
-		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
-		resets = <&tegra_car 69>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	sdhci@78000600 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
-		reg = <0x78000600 0x200>;
-		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
-		resets = <&tegra_car 15>;
-		reset-names = "sdhci";
-		status = "disabled";
-	};
-
-	usb@7d000000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x7d000000 0x4000>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USBD>;
-		resets = <&tegra_car 22>;
-		reset-names = "usb";
-		nvidia,needs-double-reset;
-		nvidia,phy = <&phy1>;
-		status = "disabled";
-	};
-
-	phy1: usb-phy@7d000000 {
-		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USBD>,
-			 <&tegra_car TEGRA30_CLK_PLL_U>,
-			 <&tegra_car TEGRA30_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 22>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <9>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <1>;
-		nvidia,xcvr-lsrslew = <1>;
-		nvidia,xcvr-hsslew = <32>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		nvidia,has-utmi-pad-registers;
-		status = "disabled";
-	};
-
-	usb@7d004000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x7d004000 0x4000>;
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USB2>;
-		resets = <&tegra_car 58>;
-		reset-names = "usb";
-		nvidia,phy = <&phy2>;
-		status = "disabled";
-	};
-
-	phy2: usb-phy@7d004000 {
-		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d004000 0x4000 0x7d000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USB2>,
-			 <&tegra_car TEGRA30_CLK_PLL_U>,
-			 <&tegra_car TEGRA30_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 58>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <9>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		nvidia,xcvr-hsslew = <32>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		status = "disabled";
-	};
-
-	usb@7d008000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
-		reg = <0x7d008000 0x4000>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USB3>;
-		resets = <&tegra_car 59>;
-		reset-names = "usb";
-		nvidia,phy = <&phy3>;
-		status = "disabled";
-	};
-
-	phy3: usb-phy@7d008000 {
-		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
-		phy_type = "utmi";
-		clocks = <&tegra_car TEGRA30_CLK_USB3>,
-			 <&tegra_car TEGRA30_CLK_PLL_U>,
-			 <&tegra_car TEGRA30_CLK_USBD>;
-		clock-names = "reg", "pll_u", "utmi-pads";
-		resets = <&tegra_car 59>, <&tegra_car 22>;
-		reset-names = "usb", "utmi-pads";
-		nvidia,hssync-start-delay = <0>;
-		nvidia,idle-wait-delay = <17>;
-		nvidia,elastic-limit = <16>;
-		nvidia,term-range-adj = <6>;
-		nvidia,xcvr-setup = <51>;
-		nvidia.xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		nvidia,xcvr-hsslew = <32>;
-		nvidia,hssquelch-level = <2>;
-		nvidia,hsdiscon-level = <5>;
-		status = "disabled";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
diff --git a/src/arm/tps6507x.dtsi b/src/arm/tps6507x.dtsi
deleted file mode 100644
index 4c326e591e5a..000000000000
--- a/src/arm/tps6507x.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/tps65070.pdf
- */
-
-&tps {
-	compatible = "ti,tps6507x";
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdcdc1_reg: regulator@0 {
-			reg = <0>;
-			regulator-compatible = "VDCDC1";
-		};
-
-		vdcdc2_reg: regulator@1 {
-			reg = <1>;
-			regulator-compatible = "VDCDC2";
-		};
-
-		vdcdc3_reg: regulator@2 {
-			reg = <2>;
-			regulator-compatible = "VDCDC3";
-		};
-
-		ldo1_reg: regulator@3 {
-			reg = <3>;
-			regulator-compatible = "LDO1";
-		};
-
-		ldo2_reg: regulator@4 {
-			reg = <4>;
-			regulator-compatible = "LDO2";
-		};
-
-	};
-};
diff --git a/src/arm/tps65217.dtsi b/src/arm/tps65217.dtsi
deleted file mode 100644
index a63272422d76..000000000000
--- a/src/arm/tps65217.dtsi
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/tps65217.pdf
- */
-
-&tps {
-	compatible = "ti,tps65217";
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dcdc1_reg: regulator@0 {
-			reg = <0>;
-			regulator-compatible = "dcdc1";
-		};
-
-		dcdc2_reg: regulator@1 {
-			reg = <1>;
-			regulator-compatible = "dcdc2";
-		};
-
-		dcdc3_reg: regulator@2 {
-			reg = <2>;
-			regulator-compatible = "dcdc3";
-		};
-
-		ldo1_reg: regulator@3 {
-			reg = <3>;
-			regulator-compatible = "ldo1";
-		};
-
-		ldo2_reg: regulator@4 {
-			reg = <4>;
-			regulator-compatible = "ldo2";
-		};
-
-		ldo3_reg: regulator@5 {
-			reg = <5>;
-			regulator-compatible = "ldo3";
-		};
-
-		ldo4_reg: regulator@6 {
-			reg = <6>;
-			regulator-compatible = "ldo4";
-		};
-	};
-};
diff --git a/src/arm/tps65910.dtsi b/src/arm/tps65910.dtsi
deleted file mode 100644
index b0ac6657a170..000000000000
--- a/src/arm/tps65910.dtsi
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/tps65910.pdf
- */
-
-&tps {
-	compatible = "ti,tps65910";
-
-	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vrtc_reg: regulator@0 {
-			reg = <0>;
-			regulator-compatible = "vrtc";
-		};
-
-		vio_reg: regulator@1 {
-			reg = <1>;
-			regulator-compatible = "vio";
-		};
-
-		vdd1_reg: regulator@2 {
-			reg = <2>;
-			regulator-compatible = "vdd1";
-		};
-
-		vdd2_reg: regulator@3 {
-			reg = <3>;
-			regulator-compatible = "vdd2";
-		};
-
-		vdd3_reg: regulator@4 {
-			reg = <4>;
-			regulator-compatible = "vdd3";
-		};
-
-		vdig1_reg: regulator@5 {
-			reg = <5>;
-			regulator-compatible = "vdig1";
-		};
-
-		vdig2_reg: regulator@6 {
-			reg = <6>;
-			regulator-compatible = "vdig2";
-		};
-
-		vpll_reg: regulator@7 {
-			reg = <7>;
-			regulator-compatible = "vpll";
-		};
-
-		vdac_reg: regulator@8 {
-			reg = <8>;
-			regulator-compatible = "vdac";
-		};
-
-		vaux1_reg: regulator@9 {
-			reg = <9>;
-			regulator-compatible = "vaux1";
-		};
-
-		vaux2_reg: regulator@10 {
-			reg = <10>;
-			regulator-compatible = "vaux2";
-		};
-
-		vaux33_reg: regulator@11 {
-			reg = <11>;
-			regulator-compatible = "vaux33";
-		};
-
-		vmmc_reg: regulator@12 {
-			reg = <12>;
-			regulator-compatible = "vmmc";
-		};
-
-		vbb_reg: regulator@13 {
-			reg = <13>;
-			regulator-compatible = "vbb";
-		};
-	};
-};
diff --git a/src/arm/twl4030.dtsi b/src/arm/twl4030.dtsi
deleted file mode 100644
index 36ae9160b558..000000000000
--- a/src/arm/twl4030.dtsi
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- */
-&twl {
-	compatible = "ti,twl4030";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	rtc {
-		compatible = "ti,twl4030-rtc";
-		interrupts = <11>;
-	};
-
-	charger: bci {
-		compatible = "ti,twl4030-bci";
-		interrupts = <9>, <2>;
-		bci3v1-supply = <&vusb3v1>;
-	};
-
-	watchdog {
-		compatible = "ti,twl4030-wdt";
-	};
-
-	vaux1: regulator-vaux1 {
-		compatible = "ti,twl4030-vaux1";
-	};
-
-	vaux2: regulator-vaux2 {
-		compatible = "ti,twl4030-vaux2";
-	};
-
-	vaux3: regulator-vaux3 {
-		compatible = "ti,twl4030-vaux3";
-	};
-
-	vaux4: regulator-vaux4 {
-		compatible = "ti,twl4030-vaux4";
-	};
-
-	vcc: regulator-vdd1 {
-		compatible = "ti,twl4030-vdd1";
-		regulator-min-microvolt = <600000>;
-		regulator-max-microvolt = <1450000>;
-	};
-
-	vdac: regulator-vdac {
-		compatible = "ti,twl4030-vdac";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vio: regulator-vio {
-		compatible = "ti,twl4030-vio";
-	};
-
-	vintana1: regulator-vintana1 {
-		compatible = "ti,twl4030-vintana1";
-	};
-
-	vintana2: regulator-vintana2 {
-		compatible = "ti,twl4030-vintana2";
-	};
-
-	vintdig: regulator-vintdig {
-		compatible = "ti,twl4030-vintdig";
-	};
-
-	vmmc1: regulator-vmmc1 {
-		compatible = "ti,twl4030-vmmc1";
-		regulator-min-microvolt = <1850000>;
-		regulator-max-microvolt = <3150000>;
-	};
-
-	vmmc2: regulator-vmmc2 {
-		compatible = "ti,twl4030-vmmc2";
-		regulator-min-microvolt = <1850000>;
-		regulator-max-microvolt = <3150000>;
-	};
-
-	vusb1v5: regulator-vusb1v5 {
-		compatible = "ti,twl4030-vusb1v5";
-	};
-
-	vusb1v8: regulator-vusb1v8 {
-		compatible = "ti,twl4030-vusb1v8";
-	};
-
-	vusb3v1: regulator-vusb3v1 {
-		compatible = "ti,twl4030-vusb3v1";
-	};
-
-	vpll1: regulator-vpll1 {
-		compatible = "ti,twl4030-vpll1";
-	};
-
-	vpll2: regulator-vpll2 {
-		compatible = "ti,twl4030-vpll2";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vsim: regulator-vsim {
-		compatible = "ti,twl4030-vsim";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	twl_gpio: gpio {
-		compatible = "ti,twl4030-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-	usb2_phy: twl4030-usb {
-		compatible = "ti,twl4030-usb";
-		interrupts = <10>, <4>;
-		usb1v5-supply = <&vusb1v5>;
-		usb1v8-supply = <&vusb1v8>;
-		usb3v1-supply = <&vusb3v1>;
-		usb_mode = <1>;
-		#phy-cells = <0>;
-	};
-
-	twl_pwm: pwm {
-		compatible = "ti,twl4030-pwm";
-		#pwm-cells = <2>;
-	};
-
-	twl_pwmled: pwmled {
-		compatible = "ti,twl4030-pwmled";
-		#pwm-cells = <2>;
-	};
-
-	twl_pwrbutton: pwrbutton {
-		compatible = "ti,twl4030-pwrbutton";
-		interrupts = <8>;
-	};
-
-	twl_keypad: keypad {
-		compatible = "ti,twl4030-keypad";
-		interrupts = <1>;
-		keypad,num-rows = <8>;
-		keypad,num-columns = <8>;
-	};
-
-	twl_madc: madc {
-		compatible = "ti,twl4030-madc";
-		interrupts = <3>;
-		#io-channel-cells = <1>;
-	};
-};
diff --git a/src/arm/twl4030_omap3.dtsi b/src/arm/twl4030_omap3.dtsi
deleted file mode 100644
index 3537ae5b2146..000000000000
--- a/src/arm/twl4030_omap3.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2013 Linaro, Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&twl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&twl4030_pins &twl4030_vpins>;
-};
-
-&omap3_pmx_core {
-	/*
-	 * On most OMAP3 platforms, the twl4030 IRQ line is connected
-	 * to the SYS_NIRQ line on OMAP.  Therefore, configure the
-	 * defaults for the SYS_NIRQ pin here.
-	 */
-	twl4030_pins: pinmux_twl4030_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
-		>;
-	};
-};
-
-/*
- * If your board is not using the I2C4 pins with twl4030, then don't include
- * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode
- * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
- * sys_nvmode2 signaling.
- */
-&omap3_pmx_wkup {
-	twl4030_vpins: pinmux_twl4030_vpins {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0)		/* i2c4_scl.i2c4_scl */
-			OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0)		/* i2c4_sda.i2c4_sda */
-			OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0)	/* sys_clkreq.sys_clkreq */
-			OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0)	/* sys_off_mode.sys_off_mode */
-		>;
-	};
-};
diff --git a/src/arm/twl6030.dtsi b/src/arm/twl6030.dtsi
deleted file mode 100644
index 2e3bd3172b23..000000000000
--- a/src/arm/twl6030.dtsi
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/twl6030.pdf
- */
-&twl {
-	compatible = "ti,twl6030";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	rtc {
-		compatible = "ti,twl4030-rtc";
-		interrupts = <11>;
-	};
-
-	vaux1: regulator-vaux1 {
-		compatible = "ti,twl6030-vaux1";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	vaux2: regulator-vaux2 {
-		compatible = "ti,twl6030-vaux2";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <2800000>;
-	};
-
-	vaux3: regulator-vaux3 {
-		compatible = "ti,twl6030-vaux3";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	vmmc: regulator-vmmc {
-		compatible = "ti,twl6030-vmmc";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	vpp: regulator-vpp {
-		compatible = "ti,twl6030-vpp";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	vusim: regulator-vusim {
-		compatible = "ti,twl6030-vusim";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <2900000>;
-	};
-
-	vdac: regulator-vdac {
-		compatible = "ti,twl6030-vdac";
-	};
-
-	vana: regulator-vana {
-		compatible = "ti,twl6030-vana";
-	};
-
-	vcxio: regulator-vcxio {
-		compatible = "ti,twl6030-vcxio";
-		regulator-always-on;
-	};
-
-	vusb: regulator-vusb {
-		compatible = "ti,twl6030-vusb";
-	};
-
-	v1v8: regulator-v1v8 {
-		compatible = "ti,twl6030-v1v8";
-		regulator-always-on;
-	};
-
-	v2v1: regulator-v2v1 {
-		compatible = "ti,twl6030-v2v1";
-		regulator-always-on;
-	};
-
-	clk32kg: regulator-clk32kg {
-		compatible = "ti,twl6030-clk32kg";
-	};
-
-	twl_usb_comparator: usb-comparator {
-		compatible = "ti,twl6030-usb";
-		interrupts = <4>, <10>;
-	};
-
-	twl_pwm: pwm {
-		/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
-		compatible = "ti,twl6030-pwm";
-		#pwm-cells = <2>;
-	};
-
-	twl_pwmled: pwmled {
-		/* provides one PWM (id 0 for Charging indicator LED) */
-		compatible = "ti,twl6030-pwmled";
-		#pwm-cells = <2>;
-	};
-};
diff --git a/src/arm/twl6030_omap4.dtsi b/src/arm/twl6030_omap4.dtsi
deleted file mode 100644
index a4fa5703c42b..000000000000
--- a/src/arm/twl6030_omap4.dtsi
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-&twl {
-	/*
-	 * On most OMAP4 platforms, the twl6030 IRQ line is connected
-	 * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is
-	 * connected to the fref_clk0_out.sys_drm_msecure line.
-	 * Therefore, configure the defaults for the SYS_NIRQ1 and
-	 * fref_clk0_out.sys_drm_msecure pins here.
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&twl6030_pins
-		&twl6030_wkup_pins
-	>;
-};
-
-&omap4_pmx_wkup {
-	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
-		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
-		>;
-	};
-};
-
-&omap4_pmx_core {
-	twl6030_pins: pinmux_twl6030_pins {
-		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
-		>;
-	};
-};
diff --git a/src/arm/usb_a9g20-dab-mmx.dtsi b/src/arm/usb_a9g20-dab-mmx.dtsi
deleted file mode 100644
index 5b0ffc1a0b24..000000000000
--- a/src/arm/usb_a9g20-dab-mmx.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
- */
-
-/ {
-	ahb {
-		apb {
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-		};
-	};
-
-	i2c-gpio@0 {
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led1 {
-			label = "user_led1";
-			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
-		};
-
-/*
-* led already used by mother board but active as high
-*		user_led2 {
-*			label = "user_led2";
-*			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-*		};
-*/
-		user_led3 {
-			label = "user_led3";
-			gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
-		};
-
-		user_led4 {
-			label = "user_led4";
-			gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
-		};
-
-		red {
-			label = "red";
-			gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
-		};
-
-		orange {
-			label = "orange";
-			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
-		};
-
-		green {
-			label = "green";
-			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		user_pb1 {
-			label = "user_pb1";
-			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-		};
-
-		user_pb2 {
-			label = "user_pb2";
-			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
-			linux,code = <0x101>;
-		};
-
-		user_pb3 {
-			label = "user_pb3";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-		};
-
-		user_pb4 {
-			label = "user_pb4";
-			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-		};
-	};
-};
diff --git a/src/arm/versatile-ab.dts b/src/arm/versatile-ab.dts
deleted file mode 100644
index 27d0d9c8adf3..000000000000
--- a/src/arm/versatile-ab.dts
+++ /dev/null
@@ -1,287 +0,0 @@
-/dts-v1/;
-/include/ "skeleton.dtsi"
-
-/ {
-	model = "ARM Versatile AB";
-	compatible = "arm,versatile-ab";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&vic>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		i2c0 = &i2c0;
-	};
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	memory {
-		reg = <0x0 0x08000000>;
-	};
-
-	xtal24mhz: xtal24mhz@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	core-module@10000000 {
-		compatible = "arm,core-module-versatile", "syscon";
-		reg = <0x10000000 0x200>;
-
-		/* OSC1 on AB, OSC4 on PB */
-		osc1: cm_aux_osc@24M {
-			#clock-cells = <0>;
-			compatible = "arm,versatile-cm-auxosc";
-			clocks = <&xtal24mhz>;
-		};
-
-		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <24>;
-			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
-		};
-
-		pclk: pclk@24M {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
-		};
-	};
-
-	flash@34000000 {
-		compatible = "arm,versatile-flash";
-		reg = <0x34000000 0x4000000>;
-		bank-width = <4>;
-	};
-
-	i2c0: i2c@10002000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "arm,versatile-i2c";
-		reg = <0x10002000 0x1000>;
-
-		rtc@68 {
-			compatible = "dallas,ds1338";
-			reg = <0x68>;
-		};
-	};
-
-	net@10010000 {
-		compatible = "smsc,lan91c111";
-		reg = <0x10010000 0x10000>;
-		interrupts = <25>;
-	};
-
-	lcd@10008000 {
-		compatible = "arm,versatile-lcd";
-		reg = <0x10008000 0x1000>;
-	};
-
-	amba {
-		compatible = "arm,amba-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vic: intc@10140000 {
-			compatible = "arm,versatile-vic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x10140000 0x1000>;
-			clear-mask = <0xffffffff>;
-			valid-mask = <0xffffffff>;
-		};
-
-		sic: intc@10003000 {
-			compatible = "arm,versatile-sic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x10003000 0x1000>;
-			interrupt-parent = <&vic>;
-			interrupts = <31>; /* Cascaded to vic */
-			clear-mask = <0xffffffff>;
-			valid-mask = <0xffc203f8>;
-		};
-
-		dma@10130000 {
-			compatible = "arm,pl081", "arm,primecell";
-			reg = <0x10130000 0x1000>;
-			interrupts = <17>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		uart0: uart@101f1000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f1000 0x1000>;
-			interrupts = <12>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		uart1: uart@101f2000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f2000 0x1000>;
-			interrupts = <13>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		uart2: uart@101f3000 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x101f3000 0x1000>;
-			interrupts = <14>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "uartclk", "apb_pclk";
-		};
-
-		smc@10100000 {
-			compatible = "arm,primecell";
-			reg = <0x10100000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		mpmc@10110000 {
-			compatible = "arm,primecell";
-			reg = <0x10110000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		display@10120000 {
-			compatible = "arm,pl110", "arm,primecell";
-			reg = <0x10120000 0x1000>;
-			interrupts = <16>;
-			clocks = <&osc1>, <&pclk>;
-			clock-names = "clcd", "apb_pclk";
-		};
-
-		sctl@101e0000 {
-			compatible = "arm,primecell";
-			reg = <0x101e0000 0x1000>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		watchdog@101e1000 {
-			compatible = "arm,primecell";
-			reg = <0x101e1000 0x1000>;
-			interrupts = <0>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		timer@101e2000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x101e2000 0x1000>;
-			interrupts = <4>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timer0", "timer1", "apb_pclk";
-		};
-
-		timer@101e3000 {
-			compatible = "arm,sp804", "arm,primecell";
-			reg = <0x101e3000 0x1000>;
-			interrupts = <5>;
-			clocks = <&timclk>, <&timclk>, <&pclk>;
-			clock-names = "timer0", "timer1", "apb_pclk";
-		};
-
-		gpio0: gpio@101e4000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e4000 0x1000>;
-			gpio-controller;
-			interrupts = <6>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio1: gpio@101e5000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e5000 0x1000>;
-			interrupts = <7>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		rtc@101e8000 {
-			compatible = "arm,pl030", "arm,primecell";
-			reg = <0x101e8000 0x1000>;
-			interrupts = <10>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		sci@101f0000 {
-			compatible = "arm,primecell";
-			reg = <0x101f0000 0x1000>;
-			interrupts = <15>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		ssp@101f4000 {
-			compatible = "arm,pl022", "arm,primecell";
-			reg = <0x101f4000 0x1000>;
-			interrupts = <11>;
-			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
-		};
-
-		fpga {
-			compatible = "arm,versatile-fpga", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x10000000 0x10000>;
-
-			aaci@4000 {
-				compatible = "arm,primecell";
-				reg = <0x4000 0x1000>;
-				interrupts = <24>;
-				clocks = <&pclk>;
-				clock-names = "apb_pclk";
-			};
-			mmc@5000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = < 0x5000 0x1000>;
-				interrupts-extended = <&vic 22 &sic 2>;
-				clocks = <&xtal24mhz>, <&pclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
-			kmi@6000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x6000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <3>;
-				clocks = <&xtal24mhz>, <&pclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-			kmi@7000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x7000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <4>;
-				clocks = <&xtal24mhz>, <&pclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-		};
-	};
-};
diff --git a/src/arm/versatile-pb.dts b/src/arm/versatile-pb.dts
deleted file mode 100644
index e36c1e82fea7..000000000000
--- a/src/arm/versatile-pb.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-#include <versatile-ab.dts>
-
-/ {
-	model = "ARM Versatile PB";
-	compatible = "arm,versatile-pb";
-
-	amba {
-		gpio2: gpio@101e6000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e6000 0x1000>;
-			interrupts = <8>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		gpio3: gpio@101e7000 {
-			compatible = "arm,pl061", "arm,primecell";
-			reg = <0x101e7000 0x1000>;
-			interrupts = <9>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
-		};
-
-		fpga {
-			uart@9000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x9000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <6>;
-				clocks = <&xtal24mhz>, <&pclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-			sci@a000 {
-				compatible = "arm,primecell";
-				reg = <0xa000 0x1000>;
-				interrupt-parent = <&sic>;
-				interrupts = <5>;
-				clocks = <&xtal24mhz>;
-				clock-names = "apb_pclk";
-			};
-			mmc@b000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0xb000 0x1000>;
-				interrupts-extended = <&vic 23 &sic 2>;
-				clocks = <&xtal24mhz>, <&pclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
-		};
-	};
-};
diff --git a/src/arm/vexpress-v2m-rs1.dtsi b/src/arm/vexpress-v2m-rs1.dtsi
deleted file mode 100644
index 756c986995a3..000000000000
--- a/src/arm/vexpress-v2m-rs1.dtsi
+++ /dev/null
@@ -1,408 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * original variant (vexpress-v2m.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m.dtsi!
- */
-
-	motherboard {
-		model = "V2M-P1";
-		arm,hbi = <0x190>;
-		arm,vexpress,site = <0>;
-		arm,v2m-memory-map = "rs1";
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-		ranges;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <4 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
-
-		psram@1,00000000 {
-			compatible = "arm,vexpress-psram", "mtd-ram";
-			reg = <1 0x00000000 0x02000000>;
-			bank-width = <4>;
-		};
-
-		vram@2,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <2 0x00000000 0x00800000>;
-		};
-
-		ethernet@2,02000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <2 0x02000000 0x10000>;
-			interrupts = <15>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&v2m_fixed_3v3>;
-			vddvario-supply = <&v2m_fixed_3v3>;
-		};
-
-		usb@2,03000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <2 0x03000000 0x20000>;
-			interrupts = <16>;
-			port1-otg;
-		};
-
-		iofpga@3,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 3 0 0x200000>;
-
-			v2m_sysreg: sysreg@010000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x010000 0x1000>;
-
-				v2m_led_gpios: sys_led@08 {
-					compatible = "arm,vexpress-sysreg,sys_led";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				v2m_mmc_gpios: sys_mci@48 {
-					compatible = "arm,vexpress-sysreg,sys_mci";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				v2m_flash_gpios: sys_flash@4c {
-					compatible = "arm,vexpress-sysreg,sys_flash";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-
-			v2m_sysctl: sysctl@020000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x020000 0x1000>;
-				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-				clock-names = "refclk", "timclk", "apb_pclk";
-				#clock-cells = <1>;
-				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-			};
-
-			/* PCI-E I2C bus */
-			v2m_i2c_pcie: i2c@030000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x030000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pcie-switch@60 {
-					compatible = "idt,89hpes32h8";
-					reg = <0x60>;
-				};
-			};
-
-			aaci@040000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x040000 0x1000>;
-				interrupts = <11>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
-
-			mmci@050000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x050000 0x1000>;
-				interrupts = <9 10>;
-				cd-gpios = <&v2m_mmc_gpios 0 0>;
-				wp-gpios = <&v2m_mmc_gpios 1 0>;
-				max-frequency = <12000000>;
-				vmmc-supply = <&v2m_fixed_3v3>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
-
-			kmi@060000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x060000 0x1000>;
-				interrupts = <12>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-
-			kmi@070000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x070000 0x1000>;
-				interrupts = <13>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-
-			v2m_serial0: uart@090000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x090000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial1: uart@0a0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a0000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial2: uart@0b0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b0000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial3: uart@0c0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c0000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			wdt@0f0000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f0000 0x1000>;
-				interrupts = <0>;
-				clocks = <&v2m_refclk32khz>, <&smbclk>;
-				clock-names = "wdogclk", "apb_pclk";
-			};
-
-			v2m_timer01: timer@110000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x110000 0x1000>;
-				interrupts = <2>;
-				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
-
-			v2m_timer23: timer@120000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x120000 0x1000>;
-				interrupts = <3>;
-				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
-
-			/* DVI I2C bus */
-			v2m_i2c_dvi: i2c@160000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x160000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				dvi-transmitter@39 {
-					compatible = "sil,sii9022-tpi", "sil,sii9022";
-					reg = <0x39>;
-				};
-
-				dvi-transmitter@60 {
-					compatible = "sil,sii9022-cpi", "sil,sii9022";
-					reg = <0x60>;
-				};
-			};
-
-			rtc@170000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x170000 0x1000>;
-				interrupts = <4>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
-
-			compact-flash@1a0000 {
-				compatible = "arm,vexpress-cf", "ata-generic";
-				reg = <0x1a0000 0x100
-				       0x1a0100 0xf00>;
-				reg-shift = <2>;
-			};
-
-			clcd@1f0000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f0000 0x1000>;
-				interrupts = <14>;
-				clocks = <&v2m_oscclk1>, <&smbclk>;
-				clock-names = "clcdclk", "apb_pclk";
-			};
-		};
-
-		v2m_fixed_3v3: fixedregulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
-
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
-
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
-
-		leds {
-			compatible = "gpio-leds";
-
-			user@1 {
-				label = "v2m:green:user1";
-				gpios = <&v2m_led_gpios 0 0>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			user@2 {
-				label = "v2m:green:user2";
-				gpios = <&v2m_led_gpios 1 0>;
-				linux,default-trigger = "mmc0";
-			};
-
-			user@3 {
-				label = "v2m:green:user3";
-				gpios = <&v2m_led_gpios 2 0>;
-				linux,default-trigger = "cpu0";
-			};
-
-			user@4 {
-				label = "v2m:green:user4";
-				gpios = <&v2m_led_gpios 3 0>;
-				linux,default-trigger = "cpu1";
-			};
-
-			user@5 {
-				label = "v2m:green:user5";
-				gpios = <&v2m_led_gpios 4 0>;
-				linux,default-trigger = "cpu2";
-			};
-
-			user@6 {
-				label = "v2m:green:user6";
-				gpios = <&v2m_led_gpios 5 0>;
-				linux,default-trigger = "cpu3";
-			};
-
-			user@7 {
-				label = "v2m:green:user7";
-				gpios = <&v2m_led_gpios 6 0>;
-				linux,default-trigger = "cpu4";
-			};
-
-			user@8 {
-				label = "v2m:green:user8";
-				gpios = <&v2m_led_gpios 7 0>;
-				linux,default-trigger = "cpu5";
-			};
-		};
-
-		mcc {
-			compatible = "arm,vexpress,config-bus";
-			arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-			osc@0 {
-				/* MCC static memory clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 0>;
-				freq-range = <25000000 60000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk0";
-			};
-
-			v2m_oscclk1: osc@1 {
-				/* CLCD clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 1>;
-				freq-range = <23750000 63500000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk1";
-			};
-
-			v2m_oscclk2: osc@2 {
-				/* IO FPGA peripheral clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 2>;
-				freq-range = <24000000 24000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk2";
-			};
-
-			volt@0 {
-				/* Logic level voltage */
-				compatible = "arm,vexpress-volt";
-				arm,vexpress-sysreg,func = <2 0>;
-				regulator-name = "VIO";
-				regulator-always-on;
-				label = "VIO";
-			};
-
-			temp@0 {
-				/* MCC internal operating temperature */
-				compatible = "arm,vexpress-temp";
-				arm,vexpress-sysreg,func = <4 0>;
-				label = "MCC";
-			};
-
-			reset@0 {
-				compatible = "arm,vexpress-reset";
-				arm,vexpress-sysreg,func = <5 0>;
-			};
-
-			muxfpga@0 {
-				compatible = "arm,vexpress-muxfpga";
-				arm,vexpress-sysreg,func = <7 0>;
-			};
-
-			shutdown@0 {
-				compatible = "arm,vexpress-shutdown";
-				arm,vexpress-sysreg,func = <8 0>;
-			};
-
-			reboot@0 {
-				compatible = "arm,vexpress-reboot";
-				arm,vexpress-sysreg,func = <9 0>;
-			};
-
-			dvimode@0 {
-				compatible = "arm,vexpress-dvimode";
-				arm,vexpress-sysreg,func = <11 0>;
-			};
-		};
-	};
diff --git a/src/arm/vexpress-v2m.dtsi b/src/arm/vexpress-v2m.dtsi
deleted file mode 100644
index ba856d604fb7..000000000000
--- a/src/arm/vexpress-v2m.dtsi
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * Motherboard Express uATX
- * V2M-P1
- *
- * HBI-0190D
- *
- * Original memory map ("Legacy memory map" in the board's
- * Technical Reference Manual)
- *
- * WARNING! The hardware described in this file is independent from the
- * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
- * correspondence between the two configurations.
- *
- * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
- * CHANGES TO vexpress-v2m-rs1.dtsi!
- */
-
-	motherboard {
-		model = "V2M-P1";
-		arm,hbi = <0x190>;
-		arm,vexpress,site = <0>;
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-		ranges;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <1 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
-
-		psram@2,00000000 {
-			compatible = "arm,vexpress-psram", "mtd-ram";
-			reg = <2 0x00000000 0x02000000>;
-			bank-width = <4>;
-		};
-
-		vram@3,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <3 0x00000000 0x00800000>;
-		};
-
-		ethernet@3,02000000 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <3 0x02000000 0x10000>;
-			interrupts = <15>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-			smsc,irq-active-high;
-			smsc,irq-push-pull;
-			vdd33a-supply = <&v2m_fixed_3v3>;
-			vddvario-supply = <&v2m_fixed_3v3>;
-		};
-
-		usb@3,03000000 {
-			compatible = "nxp,usb-isp1761";
-			reg = <3 0x03000000 0x20000>;
-			interrupts = <16>;
-			port1-otg;
-		};
-
-		iofpga@7,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 7 0 0x20000>;
-
-			v2m_sysreg: sysreg@00000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x00000 0x1000>;
-
-				v2m_led_gpios: sys_led@08 {
-					compatible = "arm,vexpress-sysreg,sys_led";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				v2m_mmc_gpios: sys_mci@48 {
-					compatible = "arm,vexpress-sysreg,sys_mci";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				v2m_flash_gpios: sys_flash@4c {
-					compatible = "arm,vexpress-sysreg,sys_flash";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-			};
-
-			v2m_sysctl: sysctl@01000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x01000 0x1000>;
-				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-				clock-names = "refclk", "timclk", "apb_pclk";
-				#clock-cells = <1>;
-				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-			};
-
-			/* PCI-E I2C bus */
-			v2m_i2c_pcie: i2c@02000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x02000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pcie-switch@60 {
-					compatible = "idt,89hpes32h8";
-					reg = <0x60>;
-				};
-			};
-
-			aaci@04000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x04000 0x1000>;
-				interrupts = <11>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
-
-			mmci@05000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x05000 0x1000>;
-				interrupts = <9 10>;
-				cd-gpios = <&v2m_mmc_gpios 0 0>;
-				wp-gpios = <&v2m_mmc_gpios 1 0>;
-				max-frequency = <12000000>;
-				vmmc-supply = <&v2m_fixed_3v3>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "mclk", "apb_pclk";
-			};
-
-			kmi@06000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x06000 0x1000>;
-				interrupts = <12>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-
-			kmi@07000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x07000 0x1000>;
-				interrupts = <13>;
-				clocks = <&v2m_clk24mhz>, <&smbclk>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-
-			v2m_serial0: uart@09000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x09000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial1: uart@0a000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial2: uart@0b000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial3: uart@0c000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_oscclk2>, <&smbclk>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			wdt@0f000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f000 0x1000>;
-				interrupts = <0>;
-				clocks = <&v2m_refclk32khz>, <&smbclk>;
-				clock-names = "wdogclk", "apb_pclk";
-			};
-
-			v2m_timer01: timer@11000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x11000 0x1000>;
-				interrupts = <2>;
-				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
-
-			v2m_timer23: timer@12000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x12000 0x1000>;
-				interrupts = <3>;
-				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
-
-			/* DVI I2C bus */
-			v2m_i2c_dvi: i2c@16000 {
-				compatible = "arm,versatile-i2c";
-				reg = <0x16000 0x1000>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				dvi-transmitter@39 {
-					compatible = "sil,sii9022-tpi", "sil,sii9022";
-					reg = <0x39>;
-				};
-
-				dvi-transmitter@60 {
-					compatible = "sil,sii9022-cpi", "sil,sii9022";
-					reg = <0x60>;
-				};
-			};
-
-			rtc@17000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x17000 0x1000>;
-				interrupts = <4>;
-				clocks = <&smbclk>;
-				clock-names = "apb_pclk";
-			};
-
-			compact-flash@1a000 {
-				compatible = "arm,vexpress-cf", "ata-generic";
-				reg = <0x1a000 0x100
-				       0x1a100 0xf00>;
-				reg-shift = <2>;
-			};
-
-			clcd@1f000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f000 0x1000>;
-				interrupts = <14>;
-				clocks = <&v2m_oscclk1>, <&smbclk>;
-				clock-names = "clcdclk", "apb_pclk";
-			};
-		};
-
-		v2m_fixed_3v3: fixedregulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
-
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
-
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
-
-		leds {
-			compatible = "gpio-leds";
-
-			user@1 {
-				label = "v2m:green:user1";
-				gpios = <&v2m_led_gpios 0 0>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			user@2 {
-				label = "v2m:green:user2";
-				gpios = <&v2m_led_gpios 1 0>;
-				linux,default-trigger = "mmc0";
-			};
-
-			user@3 {
-				label = "v2m:green:user3";
-				gpios = <&v2m_led_gpios 2 0>;
-				linux,default-trigger = "cpu0";
-			};
-
-			user@4 {
-				label = "v2m:green:user4";
-				gpios = <&v2m_led_gpios 3 0>;
-				linux,default-trigger = "cpu1";
-			};
-
-			user@5 {
-				label = "v2m:green:user5";
-				gpios = <&v2m_led_gpios 4 0>;
-				linux,default-trigger = "cpu2";
-			};
-
-			user@6 {
-				label = "v2m:green:user6";
-				gpios = <&v2m_led_gpios 5 0>;
-				linux,default-trigger = "cpu3";
-			};
-
-			user@7 {
-				label = "v2m:green:user7";
-				gpios = <&v2m_led_gpios 6 0>;
-				linux,default-trigger = "cpu4";
-			};
-
-			user@8 {
-				label = "v2m:green:user8";
-				gpios = <&v2m_led_gpios 7 0>;
-				linux,default-trigger = "cpu5";
-			};
-		};
-
-		mcc {
-			compatible = "arm,vexpress,config-bus";
-			arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-			osc@0 {
-				/* MCC static memory clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 0>;
-				freq-range = <25000000 60000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk0";
-			};
-
-			v2m_oscclk1: osc@1 {
-				/* CLCD clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 1>;
-				freq-range = <23750000 63500000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk1";
-			};
-
-			v2m_oscclk2: osc@2 {
-				/* IO FPGA peripheral clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 2>;
-				freq-range = <24000000 24000000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk2";
-			};
-
-			volt@0 {
-				/* Logic level voltage */
-				compatible = "arm,vexpress-volt";
-				arm,vexpress-sysreg,func = <2 0>;
-				regulator-name = "VIO";
-				regulator-always-on;
-				label = "VIO";
-			};
-
-			temp@0 {
-				/* MCC internal operating temperature */
-				compatible = "arm,vexpress-temp";
-				arm,vexpress-sysreg,func = <4 0>;
-				label = "MCC";
-			};
-
-			reset@0 {
-				compatible = "arm,vexpress-reset";
-				arm,vexpress-sysreg,func = <5 0>;
-			};
-
-			muxfpga@0 {
-				compatible = "arm,vexpress-muxfpga";
-				arm,vexpress-sysreg,func = <7 0>;
-			};
-
-			shutdown@0 {
-				compatible = "arm,vexpress-shutdown";
-				arm,vexpress-sysreg,func = <8 0>;
-			};
-
-			reboot@0 {
-				compatible = "arm,vexpress-reboot";
-				arm,vexpress-sysreg,func = <9 0>;
-			};
-
-			dvimode@0 {
-				compatible = "arm,vexpress-dvimode";
-				arm,vexpress-sysreg,func = <11 0>;
-			};
-		};
-	};
diff --git a/src/arm/vexpress-v2p-ca15-tc1.dts b/src/arm/vexpress-v2p-ca15-tc1.dts
deleted file mode 100644
index 9420053acc14..000000000000
--- a/src/arm/vexpress-v2p-ca15-tc1.dts
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A15x2 (version with Test Chip 1)
- * Cortex-A15 MPCore (V2P-CA15)
- *
- * HBI-0237A
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA15";
-	arm,hbi = <0x237>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0 0x2b000000 0 0x1000>;
-		interrupts = <0 85 4>;
-		clocks = <&oscclk5>;
-		clock-names = "pxlclk";
-	};
-
-	memory-controller@2b0a0000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0 0x2b0a0000 0 0x1000>;
-		clocks = <&oscclk7>;
-		clock-names = "apb_pclk";
-	};
-
-	wdt@2b060000 {
-		compatible = "arm,sp805", "arm,primecell";
-		status = "disabled";
-		reg = <0 0x2b060000 0 0x1000>;
-		interrupts = <0 98 4>;
-		clocks = <&oscclk7>;
-		clock-names = "apb_pclk";
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x1000>,
-		      <0 0x2c004000 0 0x2000>,
-		      <0 0x2c006000 0 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	memory-controller@7ffd0000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0 0x7ffd0000 0 0x1000>;
-		interrupts = <0 86 4>,
-			     <0 87 4>;
-		clocks = <&oscclk7>;
-		clock-names = "apb_pclk";
-	};
-
-	dma@7ffb0000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0 0x7ffb0000 0 0x1000>;
-		interrupts = <0 92 4>,
-			     <0 88 4>,
-			     <0 89 4>,
-			     <0 90 4>,
-			     <0 91 4>;
-		clocks = <&oscclk7>;
-		clock-names = "apb_pclk";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <0 68 4>,
-			     <0 69 4>;
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			/* CPU PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <50000000 60000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk0";
-		};
-
-		osc@4 {
-			/* Multiplexed AXI master clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 4>;
-			freq-range = <20000000 40000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk4";
-		};
-
-		oscclk5: osc@5 {
-			/* HDLCD PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 5>;
-			freq-range = <23750000 165000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk5";
-		};
-
-		smbclk: osc@6 {
-			/* SMB clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 6>;
-			freq-range = <20000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk6";
-		};
-
-		oscclk7: osc@7 {
-			/* SYS PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 7>;
-			freq-range = <20000000 60000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk7";
-		};
-
-		osc@8 {
-			/* DDR2 PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 8>;
-			freq-range = <40000000 40000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk8";
-		};
-
-		volt@0 {
-			/* CPU core voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 0>;
-			regulator-name = "Cores";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-			label = "Cores";
-		};
-
-		amp@0 {
-			/* Total current for the two cores */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 0>;
-			label = "Cores";
-		};
-
-		temp@0 {
-			/* DCC internal temperature */
-			compatible = "arm,vexpress-temp";
-			arm,vexpress-sysreg,func = <4 0>;
-			label = "DCC";
-		};
-
-		power@0 {
-			/* Total power */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 0>;
-			label = "Cores";
-		};
-
-		energy@0 {
-			/* Total energy */
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 0>;
-			label = "Cores";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
-	};
-};
diff --git a/src/arm/vexpress-v2p-ca15_a7.dts b/src/arm/vexpress-v2p-ca15_a7.dts
deleted file mode 100644
index a25c262326dc..000000000000
--- a/src/arm/vexpress-v2p-ca15_a7.dts
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A15x2 A7x3
- * Cortex-A15_A7 MPCore (V2P-CA15_A7)
- *
- * HBI-0249A
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA15_CA7";
-	arm,hbi = <0x249>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			cci-control-port = <&cci_control2>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			cci-control-port = <&cci_control2>;
-		};
-
-		cpu4: cpu@4 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			cci-control-port = <&cci_control2>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-
-	wdt@2a490000 {
-		compatible = "arm,sp805", "arm,primecell";
-		reg = <0 0x2a490000 0 0x1000>;
-		interrupts = <0 98 4>;
-		clocks = <&oscclk6a>, <&oscclk6a>;
-		clock-names = "wdogclk", "apb_pclk";
-	};
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0 0x2b000000 0 0x1000>;
-		interrupts = <0 85 4>;
-		clocks = <&oscclk5>;
-		clock-names = "pxlclk";
-	};
-
-	memory-controller@2b0a0000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0 0x2b0a0000 0 0x1000>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x1000>,
-		      <0 0x2c004000 0 0x2000>,
-		      <0 0x2c006000 0 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	cci@2c090000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0x2c090000 0 0x1000>;
-		ranges = <0x0 0x0 0x2c090000 0x10000>;
-
-		cci_control1: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
-		};
-
-		cci_control2: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
-		};
-	};
-
-	memory-controller@7ffd0000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0 0x7ffd0000 0 0x1000>;
-		interrupts = <0 86 4>,
-			     <0 87 4>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-	};
-
-	dma@7ff00000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0 0x7ff00000 0 0x1000>;
-		interrupts = <0 92 4>,
-			     <0 88 4>,
-			     <0 89 4>,
-			     <0 90 4>,
-			     <0 91 4>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-	};
-
-        scc@7fff0000 {
-		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
-		reg = <0 0x7fff0000 0 0x1000>;
-		interrupts = <0 95 4>;
-        };
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupts = <0 68 4>,
-			     <0 69 4>;
-	};
-
-	oscclk6a: oscclk6a {
-		/* Reference 24MHz clock */
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "oscclk6a";
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			/* A15 PLL 0 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk0";
-		};
-
-		osc@1 {
-			/* A15 PLL 1 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk1";
-		};
-
-		osc@2 {
-			/* A7 PLL 0 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk2";
-		};
-
-		osc@3 {
-			/* A7 PLL 1 reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 3>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk3";
-		};
-
-		osc@4 {
-			/* External AXI master clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 4>;
-			freq-range = <20000000 40000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk4";
-		};
-
-		oscclk5: osc@5 {
-			/* HDLCD PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 5>;
-			freq-range = <23750000 165000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk5";
-		};
-
-		smbclk: osc@6 {
-			/* Static memory controller clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 6>;
-			freq-range = <20000000 40000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk6";
-		};
-
-		osc@7 {
-			/* SYS PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 7>;
-			freq-range = <17000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk7";
-		};
-
-		osc@8 {
-			/* DDR2 PLL reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 8>;
-			freq-range = <20000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk8";
-		};
-
-		volt@0 {
-			/* A15 CPU core voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 0>;
-			regulator-name = "A15 Vcore";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-			label = "A15 Vcore";
-		};
-
-		volt@1 {
-			/* A7 CPU core voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 1>;
-			regulator-name = "A7 Vcore";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-			label = "A7 Vcore";
-		};
-
-		amp@0 {
-			/* Total current for the two A15 cores */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 0>;
-			label = "A15 Icore";
-		};
-
-		amp@1 {
-			/* Total current for the three A7 cores */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 1>;
-			label = "A7 Icore";
-		};
-
-		temp@0 {
-			/* DCC internal temperature */
-			compatible = "arm,vexpress-temp";
-			arm,vexpress-sysreg,func = <4 0>;
-			label = "DCC";
-		};
-
-		power@0 {
-			/* Total power for the two A15 cores */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 0>;
-			label = "A15 Pcore";
-		};
-
-		power@1 {
-			/* Total power for the three A7 cores */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 1>;
-			label = "A7 Pcore";
-		};
-
-		energy@0 {
-			/* Total energy for the two A15 cores */
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 0>, <13 1>;
-			label = "A15 Jcore";
-		};
-
-		energy@2 {
-			/* Total energy for the three A7 cores */
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 2>, <13 3>;
-			label = "A7 Jcore";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
-	};
-};
diff --git a/src/arm/vexpress-v2p-ca5s.dts b/src/arm/vexpress-v2p-ca5s.dts
deleted file mode 100644
index d2709b73316b..000000000000
--- a/src/arm/vexpress-v2p-ca5s.dts
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A5x2
- * Cortex-A5 MPCore (V2P-CA5s)
- *
- * HBI-0225B
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA5s";
-	arm,hbi = <0x225>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a5";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;
-	};
-
-	hdlcd@2a110000 {
-		compatible = "arm,hdlcd";
-		reg = <0x2a110000 0x1000>;
-		interrupts = <0 85 4>;
-		clocks = <&oscclk3>;
-		clock-names = "pxlclk";
-	};
-
-	memory-controller@2a150000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0x2a150000 0x1000>;
-		clocks = <&oscclk1>;
-		clock-names = "apb_pclk";
-	};
-
-	memory-controller@2a190000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0x2a190000 0x1000>;
-		interrupts = <0 86 4>,
-			     <0 87 4>;
-		clocks = <&oscclk1>;
-		clock-names = "apb_pclk";
-	};
-
-	scu@2c000000 {
-		compatible = "arm,cortex-a5-scu";
-		reg = <0x2c000000 0x58>;
-	};
-
-	timer@2c000600 {
-		compatible = "arm,cortex-a5-twd-timer";
-		reg = <0x2c000600 0x20>;
-		interrupts = <1 13 0x304>;
-	};
-
-	timer@2c000200 {
-		compatible = "arm,cortex-a5-global-timer",
-		             "arm,cortex-a9-global-timer";
-		reg = <0x2c000200 0x20>;
-		interrupts = <1 11 0x304>;
-		clocks = <&oscclk0>;
-	};
-
-	watchdog@2c000620 {
-		compatible = "arm,cortex-a5-twd-wdt";
-		reg = <0x2c000620 0x20>;
-		interrupts = <1 14 0x304>;
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x2c001000 0x1000>,
-		      <0x2c000100 0x100>;
-	};
-
-	L2: cache-controller@2c0f0000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x2c0f0000 0x1000>;
-		interrupts = <0 84 4>;
-		cache-level = <2>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a5-pmu";
-		interrupts = <0 68 4>,
-			     <0 69 4>;
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		oscclk0: osc@0 {
-			/* CPU and internal AXI reference clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <50000000 100000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk0";
-		};
-
-		oscclk1: osc@1 {
-			/* Multiplexed AXI master clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <5000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk1";
-		};
-
-		osc@2 {
-			/* DDR2 */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <80000000 120000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk2";
-		};
-
-		oscclk3: osc@3 {
-			/* HDLCD */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 3>;
-			freq-range = <23750000 165000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk3";
-		};
-
-		osc@4 {
-			/* Test chip gate configuration */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 4>;
-			freq-range = <80000000 80000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk4";
-		};
-
-		smbclk: osc@5 {
-			/* SMB clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 5>;
-			freq-range = <25000000 60000000>;
-			#clock-cells = <0>;
-			clock-output-names = "oscclk5";
-		};
-
-		temp@0 {
-			/* DCC internal operating temperature */
-			compatible = "arm,vexpress-temp";
-			arm,vexpress-sysreg,func = <4 0>;
-			label = "DCC";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x04000000>,
-			 <1 0 0x14000000 0x04000000>,
-			 <2 0 0x18000000 0x04000000>,
-			 <3 0 0x1c000000 0x04000000>,
-			 <4 0 0x0c000000 0x04000000>,
-			 <5 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m-rs1.dtsi"
-	};
-};
diff --git a/src/arm/vexpress-v2p-ca9.dts b/src/arm/vexpress-v2p-ca9.dts
deleted file mode 100644
index 62d9b225dcce..000000000000
--- a/src/arm/vexpress-v2p-ca9.dts
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * ARM Ltd. Versatile Express
- *
- * CoreTile Express A9x4
- * Cortex-A9 MPCore (V2P-CA9)
- *
- * HBI-0191B
- */
-
-/dts-v1/;
-
-/ {
-	model = "V2P-CA9";
-	arm,hbi = <0x191>;
-	arm,vexpress,site = <0xf>;
-	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-		i2c0 = &v2m_i2c_dvi;
-		i2c1 = &v2m_i2c_pcie;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <2>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <3>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory@60000000 {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
-	clcd@10020000 {
-		compatible = "arm,pl111", "arm,primecell";
-		reg = <0x10020000 0x1000>;
-		interrupts = <0 44 4>;
-		clocks = <&oscclk1>, <&oscclk2>;
-		clock-names = "clcdclk", "apb_pclk";
-	};
-
-	memory-controller@100e0000 {
-		compatible = "arm,pl341", "arm,primecell";
-		reg = <0x100e0000 0x1000>;
-		clocks = <&oscclk2>;
-		clock-names = "apb_pclk";
-	};
-
-	memory-controller@100e1000 {
-		compatible = "arm,pl354", "arm,primecell";
-		reg = <0x100e1000 0x1000>;
-		interrupts = <0 45 4>,
-			     <0 46 4>;
-		clocks = <&oscclk2>;
-		clock-names = "apb_pclk";
-	};
-
-	timer@100e4000 {
-		compatible = "arm,sp804", "arm,primecell";
-		reg = <0x100e4000 0x1000>;
-		interrupts = <0 48 4>,
-			     <0 49 4>;
-		clocks = <&oscclk2>, <&oscclk2>;
-		clock-names = "timclk", "apb_pclk";
-		status = "disabled";
-	};
-
-	watchdog@100e5000 {
-		compatible = "arm,sp805", "arm,primecell";
-		reg = <0x100e5000 0x1000>;
-		interrupts = <0 51 4>;
-		clocks = <&oscclk2>, <&oscclk2>;
-		clock-names = "wdogclk", "apb_pclk";
-	};
-
-	scu@1e000000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x1e000000 0x58>;
-	};
-
-	timer@1e000600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x1e000600 0x20>;
-		interrupts = <1 13 0xf04>;
-	};
-
-	watchdog@1e000620 {
-		compatible = "arm,cortex-a9-twd-wdt";
-		reg = <0x1e000620 0x20>;
-		interrupts = <1 14 0xf04>;
-	};
-
-	gic: interrupt-controller@1e001000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x1e001000 0x1000>,
-		      <0x1e000100 0x100>;
-	};
-
-	L2: cache-controller@1e00a000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x1e00a000 0x1000>;
-		interrupts = <0 43 4>;
-		cache-level = <2>;
-		arm,data-latency = <1 1 1>;
-		arm,tag-latency = <1 1 1>;
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 60 4>,
-			     <0 61 4>,
-			     <0 62 4>,
-			     <0 63 4>;
-	};
-
-	dcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			/* ACLK clock to the AXI master port on the test chip */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <30000000 50000000>;
-			#clock-cells = <0>;
-			clock-output-names = "extsaxiclk";
-		};
-
-		oscclk1: osc@1 {
-			/* Reference clock for the CLCD */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <10000000 80000000>;
-			#clock-cells = <0>;
-			clock-output-names = "clcdclk";
-		};
-
-		smbclk: oscclk2: osc@2 {
-			/* Reference clock for the test chip internal PLLs */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <33000000 100000000>;
-			#clock-cells = <0>;
-			clock-output-names = "tcrefclk";
-		};
-
-		volt@0 {
-			/* Test Chip internal logic voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 0>;
-			regulator-name = "VD10";
-			regulator-always-on;
-			label = "VD10";
-		};
-
-		volt@1 {
-			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 1>;
-			regulator-name = "VD10_S2";
-			regulator-always-on;
-			label = "VD10_S2";
-		};
-
-		volt@2 {
-			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 2>;
-			regulator-name = "VD10_S3";
-			regulator-always-on;
-			label = "VD10_S3";
-		};
-
-		volt@3 {
-			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 3>;
-			regulator-name = "VCC1V8";
-			regulator-always-on;
-			label = "VCC1V8";
-		};
-
-		volt@4 {
-			/* DDR2 SDRAM VTT termination voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 4>;
-			regulator-name = "DDR2VTT";
-			regulator-always-on;
-			label = "DDR2VTT";
-		};
-
-		volt@5 {
-			/* Local board supply for miscellaneous logic external to the Test Chip */
-			arm,vexpress-sysreg,func = <2 5>;
-			compatible = "arm,vexpress-volt";
-			regulator-name = "VCC3V3";
-			regulator-always-on;
-			label = "VCC3V3";
-		};
-
-		amp@0 {
-			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 0>;
-			label = "VD10_S2";
-		};
-
-		amp@1 {
-			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
-			compatible = "arm,vexpress-amp";
-			arm,vexpress-sysreg,func = <3 1>;
-			label = "VD10_S3";
-		};
-
-		power@0 {
-			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 0>;
-			label = "PVD10_S2";
-		};
-
-		power@1 {
-			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
-			compatible = "arm,vexpress-power";
-			arm,vexpress-sysreg,func = <12 1>;
-			label = "PVD10_S3";
-		};
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x40000000 0x04000000>,
-			 <1 0 0x44000000 0x04000000>,
-			 <2 0 0x48000000 0x04000000>,
-			 <3 0 0x4c000000 0x04000000>,
-			 <7 0 0x10000000 0x00020000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		/include/ "vexpress-v2m.dtsi"
-	};
-};
diff --git a/src/arm/vf610-colibri.dts b/src/arm/vf610-colibri.dts
deleted file mode 100644
index aecc7dbc65e8..000000000000
--- a/src/arm/vf610-colibri.dts
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * Copyright 2014 Toradex AG
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/dts-v1/;
-#include "vf610.dtsi"
-
-/ {
-	model = "Toradex Colibri VF61 COM";
-	compatible = "toradex,vf610-colibri", "fsl,vf610";
-
-	chosen {
-		bootargs = "console=ttyLP0,115200";
-	};
-
-	memory {
-		reg = <0x80000000 0x10000000>;
-	};
-
-	clocks {
-		enet_ext {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&fec1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&L2 {
-	arm,data-latency = <2 1 2>;
-	arm,tag-latency = <3 2 3>;
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&iomuxc {
-	vf610-colibri {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,fsl,pins = <
-				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-				VF610_PAD_PTB20__GPIO_42	0x219d
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
-
-		pinctrl_uart0: uart0grp {
-			fsl,pins = <
-				VF610_PAD_PTB10__UART0_TX		0x21a2
-				VF610_PAD_PTB11__UART0_RX		0x21a1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				VF610_PAD_PTD0__UART2_TX		0x21a2
-				VF610_PAD_PTD1__UART2_RX		0x21a1
-				VF610_PAD_PTD2__UART2_RTS		0x21a2
-				VF610_PAD_PTD3__UART2_CTS		0x21a1
-			>;
-		};
-	};
-};
diff --git a/src/arm/vf610-cosmic.dts b/src/arm/vf610-cosmic.dts
deleted file mode 100644
index 3fd1b74e1216..000000000000
--- a/src/arm/vf610-cosmic.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- * Copyright 2013 Linaro Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/dts-v1/;
-#include "vf610.dtsi"
-
-/ {
-	model = "PHYTEC Cosmic/Cosmic+ Board";
-	compatible = "phytec,vf610-cosmic", "fsl,vf610";
-
-	chosen {
-		bootargs = "console=ttyLP1,115200";
-	};
-
-	memory {
-		reg = <0x80000000 0x10000000>;
-	};
-
-	clocks {
-		enet_ext {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-};
-
-&fec1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&iomuxc {
-	vf610-cosmic {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
diff --git a/src/arm/vf610-pinfunc.h b/src/arm/vf610-pinfunc.h
deleted file mode 100644
index 1ee681f7ce2f..000000000000
--- a/src/arm/vf610-pinfunc.h
+++ /dev/null
@@ -1,810 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __DTS_VF610_PINFUNC_H
-#define __DTS_VF610_PINFUNC_H
-
-/*
- * The pin function ID for VF610 is a tuple of:
- * <mux_reg input_reg mux_mode input_val>
- */
-
-#define ALT0	0x0
-#define ALT1	0x1
-#define ALT2	0x2
-#define ALT3	0x3
-#define ALT4	0x4
-#define ALT5	0x5
-#define ALT6	0x6
-#define ALT7	0x7
-
-
-#define VF610_PAD_PTA6__GPIO_0			0x000 0x000 ALT0 0x0
-#define VF610_PAD_PTA6__RMII_CLKOUT		0x000 0x000 ALT1 0x0
-#define VF610_PAD_PTA6__RMII_CLKIN		0x000 0x2F0 ALT2 0x0
-#define VF610_PAD_PTA6__DCU1_TCON11		0x000 0x000 ALT4 0x0
-#define VF610_PAD_PTA6__DCU1_R2			0x000 0x000 ALT7 0x0
-#define VF610_PAD_PTA8__GPIO_1			0x004 0x000 ALT0 0x0
-#define VF610_PAD_PTA8__TCLK			0x004 0x000 ALT1 0x0
-#define VF610_PAD_PTA8__DCU0_R0			0x004 0x000 ALT4 0x0
-#define VF610_PAD_PTA8__MLB_CLK			0x004 0x354 ALT7 0x0
-#define VF610_PAD_PTA9__GPIO_2			0x008 0x000 ALT0 0x0
-#define VF610_PAD_PTA9__TDI			0x008 0x000 ALT1 0x0
-#define VF610_PAD_PTA9__RMII_CLKOUT		0x008 0x000 ALT2 0x0
-#define VF610_PAD_PTA9__RMII_CLKIN		0x008 0x2F0 ALT3 0x1
-#define VF610_PAD_PTA9__DCU0_R1			0x008 0x000 ALT4 0x0
-#define VF610_PAD_PTA9__WDOG_B			0x008 0x000 ALT6 0x0
-#define VF610_PAD_PTA10__GPIO_3			0x00C 0x000 ALT0 0x0
-#define VF610_PAD_PTA10__TDO			0x00C 0x000 ALT1 0x0
-#define VF610_PAD_PTA10__EXT_AUDIO_MCLK		0x00C 0x2EC ALT2 0x0
-#define VF610_PAD_PTA10__DCU0_G0		0x00C 0x000 ALT4 0x0
-#define VF610_PAD_PTA10__ENET_TS_CLKIN		0x00C 0x2F4 ALT6 0x0
-#define VF610_PAD_PTA10__MLB_SIGNAL		0x00C 0x35C ALT7 0x0
-#define VF610_PAD_PTA11__GPIO_4			0x010 0x000 ALT0 0x0
-#define VF610_PAD_PTA11__TMS			0x010 0x000 ALT1 0x0
-#define VF610_PAD_PTA11__DCU0_G1		0x010 0x000 ALT4 0x0
-#define VF610_PAD_PTA11__MLB_DATA		0x010 0x358 ALT7 0x0
-#define VF610_PAD_PTA12__GPIO_5			0x014 0x000 ALT0 0x0
-#define VF610_PAD_PTA12__TRACECK		0x014 0x000 ALT1 0x0
-#define VF610_PAD_PTA12__EXT_AUDIO_MCLK		0x014 0x2EC ALT2 0x1
-#define VF610_PAD_PTA12__VIU_DATA13		0x014 0x000 ALT6 0x0
-#define VF610_PAD_PTA12__I2C0_SCL		0x014 0x33C ALT7 0x0
-#define VF610_PAD_PTA16__GPIO_6			0x018 0x000 ALT0 0x0
-#define VF610_PAD_PTA16__TRACED0		0x018 0x000 ALT1 0x0
-#define VF610_PAD_PTA16__USB0_VBUS_EN		0x018 0x000 ALT2 0x0
-#define VF610_PAD_PTA16__ADC1_SE0		0x018 0x000 ALT3 0x0
-#define VF610_PAD_PTA16__LCD29			0x018 0x000 ALT4 0x0
-#define VF610_PAD_PTA16__SAI2_TX_BCLK		0x018 0x370 ALT5 0x0
-#define VF610_PAD_PTA16__VIU_DATA14		0x018 0x000 ALT6 0x0
-#define VF610_PAD_PTA16__I2C0_SDA		0x018 0x340 ALT7 0x0
-#define VF610_PAD_PTA17__GPIO_7			0x01C 0x000 ALT0 0x0
-#define VF610_PAD_PTA17__TRACED1		0x01C 0x000 ALT1 0x0
-#define VF610_PAD_PTA17__USB0_VBUS_OC		0x01C 0x000 ALT2 0x0
-#define VF610_PAD_PTA17__ADC1_SE1		0x01C 0x000 ALT3 0x0
-#define VF610_PAD_PTA17__LCD30			0x01C 0x000 ALT4 0x0
-#define VF610_PAD_PTA17__USB0_SOF_PULSE		0x01C 0x000 ALT5 0x0
-#define VF610_PAD_PTA17__VIU_DATA15		0x01C 0x000 ALT6 0x0
-#define VF610_PAD_PTA17__I2C1_SCL		0x01C 0x344 ALT7 0x0
-#define VF610_PAD_PTA18__GPIO_8			0x020 0x000 ALT0 0x0
-#define VF610_PAD_PTA18__TRACED2		0x020 0x000 ALT1 0x0
-#define VF610_PAD_PTA18__ADC0_SE0		0x020 0x000 ALT2 0x0
-#define VF610_PAD_PTA18__FTM1_QD_PHA		0x020 0x334 ALT3 0x0
-#define VF610_PAD_PTA18__LCD31			0x020 0x000 ALT4 0x0
-#define VF610_PAD_PTA18__SAI2_TX_DATA		0x020 0x000 ALT5 0x0
-#define VF610_PAD_PTA18__VIU_DATA16		0x020 0x000 ALT6 0x0
-#define VF610_PAD_PTA18__I2C1_SDA		0x020 0x348 ALT7 0x0
-#define VF610_PAD_PTA19__GPIO_9			0x024 0x000 ALT0 0x0
-#define VF610_PAD_PTA19__TRACED3		0x024 0x000 ALT1 0x0
-#define VF610_PAD_PTA19__ADC0_SE1		0x024 0x000 ALT2 0x0
-#define VF610_PAD_PTA19__FTM1_QD_PHB		0x024 0x338 ALT3 0x0
-#define VF610_PAD_PTA19__LCD32			0x024 0x000 ALT4 0x0
-#define VF610_PAD_PTA19__SAI2_TX_SYNC		0x024 0x000 ALT5 0x0
-#define VF610_PAD_PTA19__VIU_DATA17		0x024 0x000 ALT6 0x0
-#define VF610_PAD_PTA19__QSPI1_A_QSCK		0x024 0x374 ALT7 0x0
-#define VF610_PAD_PTA20__GPIO_10		0x028 0x000 ALT0 0x0
-#define VF610_PAD_PTA20__TRACED4		0x028 0x000 ALT1 0x0
-#define VF610_PAD_PTA20__LCD33			0x028 0x000 ALT4 0x0
-#define VF610_PAD_PTA20__UART3_TX		0x028 0x394 ALT6 0x0
-#define VF610_PAD_PTA20__DCU1_HSYNC		0x028 0x000 ALT7 0x0
-#define VF610_PAD_PTA21__GPIO_11		0x02C 0x000 ALT0 0x0
-#define VF610_PAD_PTA21__TRACED5		0x02C 0x000 ALT1 0x0
-#define VF610_PAD_PTA21__SAI2_RX_BCLK		0x02C 0x364 ALT5 0x0
-#define VF610_PAD_PTA21__UART3_RX		0x02C 0x390 ALT6 0x0
-#define VF610_PAD_PTA21__DCU1_VSYNC		0x02C 0x000 ALT7 0x0
-#define VF610_PAD_PTA22__GPIO_12		0x030 0x000 ALT0 0x0
-#define VF610_PAD_PTA22__TRACED6		0x030 0x000 ALT1 0x0
-#define VF610_PAD_PTA22__SAI2_RX_DATA		0x030 0x368 ALT5 0x0
-#define VF610_PAD_PTA22__I2C2_SCL		0x030 0x34C ALT6 0x0
-#define VF610_PAD_PTA22__DCU1_TAG		0x030 0x000 ALT7 0x0
-#define VF610_PAD_PTA23__GPIO_13		0x034 0x000 ALT0 0x0
-#define VF610_PAD_PTA23__TRACED7		0x034 0x000 ALT1 0x0
-#define VF610_PAD_PTA23__SAI2_RX_SYNC		0x034 0x36C ALT5 0x0
-#define VF610_PAD_PTA23__I2C2_SDA		0x034 0x350 ALT6 0x0
-#define VF610_PAD_PTA23__DCU1_DE		0x034 0x000 ALT7 0x0
-#define VF610_PAD_PTA24__GPIO_14		0x038 0x000 ALT0 0x0
-#define VF610_PAD_PTA24__TRACED8		0x038 0x000 ALT1 0x0
-#define VF610_PAD_PTA24__USB1_VBUS_EN		0x038 0x000 ALT2 0x0
-#define VF610_PAD_PTA24__ESDHC1_CLK		0x038 0x000 ALT5 0x0
-#define VF610_PAD_PTA24__DCU1_TCON4		0x038 0x000 ALT6 0x0
-#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL	0x038 0x000 ALT7 0x0
-#define VF610_PAD_PTA25__GPIO_15		0x03C 0x000 ALT0 0x0
-#define VF610_PAD_PTA25__TRACED9		0x03C 0x000 ALT1 0x0
-#define VF610_PAD_PTA25__USB1_VBUS_OC		0x03C 0x000 ALT2 0x0
-#define VF610_PAD_PTA25__ESDHC1_CMD		0x03C 0x000 ALT5 0x0
-#define VF610_PAD_PTA25__DCU1_TCON5		0x03C 0x000 ALT6 0x0
-#define VF610_PAD_PTA26__GPIO_16		0x040 0x000 ALT0 0x0
-#define VF610_PAD_PTA26__TRACED10		0x040 0x000 ALT1 0x0
-#define VF610_PAD_PTA26__SAI3_TX_BCLK		0x040 0x000 ALT2 0x0
-#define VF610_PAD_PTA26__ESDHC1_DAT0		0x040 0x000 ALT5 0x0
-#define VF610_PAD_PTA26__DCU1_TCON6		0x040 0x000 ALT6 0x0
-#define VF610_PAD_PTA27__GPIO_17		0x044 0x000 ALT0 0x0
-#define VF610_PAD_PTA27__TRACED11		0x044 0x000 ALT1 0x0
-#define VF610_PAD_PTA27__SAI3_RX_BCLK		0x044 0x000 ALT2 0x0
-#define VF610_PAD_PTA27__ESDHC1_DAT1		0x044 0x000 ALT5 0x0
-#define VF610_PAD_PTA27__DCU1_TCON7		0x044 0x000 ALT6 0x0
-#define VF610_PAD_PTA28__GPIO_18		0x048 0x000 ALT0 0x0
-#define VF610_PAD_PTA28__TRACED12		0x048 0x000 ALT1 0x0
-#define VF610_PAD_PTA28__SAI3_RX_DATA		0x048 0x000 ALT2 0x0
-#define VF610_PAD_PTA28__ENET1_1588_TMR0	0x048 0x000 ALT3 0x0
-#define VF610_PAD_PTA28__UART4_TX		0x048 0x000 ALT4 0x0
-#define VF610_PAD_PTA28__ESDHC1_DATA2		0x048 0x000 ALT5 0x0
-#define VF610_PAD_PTA28__DCU1_TCON8		0x048 0x000 ALT6 0x0
-#define VF610_PAD_PTA29__GPIO_19		0x04C 0x000 ALT0 0x0
-#define VF610_PAD_PTA29__TRACED13		0x04C 0x000 ALT1 0x0
-#define VF610_PAD_PTA29__SAI3_TX_DATA		0x04C 0x000 ALT2 0x0
-#define VF610_PAD_PTA29__ENET1_1588_TMR1	0x04C 0x000 ALT3 0x0
-#define VF610_PAD_PTA29__UART4_RX		0x04C 0x000 ALT4 0x0
-#define VF610_PAD_PTA29__ESDHC1_DAT3		0x04C 0x000 ALT5 0x0
-#define VF610_PAD_PTA29__DCU1_TCON9		0x04C 0x000 ALT6 0x0
-#define VF610_PAD_PTA30__GPIO_20		0x050 0x000 ALT0 0x0
-#define VF610_PAD_PTA30__TRACED14		0x050 0x000 ALT1 0x0
-#define VF610_PAD_PTA30__SAI3_RX_SYNC		0x050 0x000 ALT2 0x0
-#define VF610_PAD_PTA30__ENET1_1588_TMR2	0x050 0x000 ALT3 0x0
-#define VF610_PAD_PTA30__UART4_RTS		0x050 0x000 ALT4 0x0
-#define VF610_PAD_PTA30__I2C3_SCL		0x050 0x000 ALT5 0x0
-#define VF610_PAD_PTA30__UART3_TX		0x050 0x394 ALT7 0x1
-#define VF610_PAD_PTA31__GPIO_21		0x054 0x000 ALT0 0x0
-#define VF610_PAD_PTA31__TRACED15		0x054 0x000 ALT1 0x0
-#define VF610_PAD_PTA31__SAI3_TX_SYNC		0x054 0x000 ALT2 0x0
-#define VF610_PAD_PTA31__ENET1_1588_TMR3	0x054 0x000 ALT3 0x0
-#define VF610_PAD_PTA31__UART4_CTS		0x054 0x000 ALT4 0x0
-#define VF610_PAD_PTA31__I2C3_SDA		0x054 0x000 ALT5 0x0
-#define VF610_PAD_PTA31__UART3_RX		0x054 0x390 ALT7 0x1
-#define VF610_PAD_PTB0__GPIO_22			0x058 0x000 ALT0 0x0
-#define VF610_PAD_PTB0__FTM0_CH0		0x058 0x000 ALT1 0x0
-#define VF610_PAD_PTB0__ADC0_SE2		0x058 0x000 ALT2 0x0
-#define VF610_PAD_PTB0__TRACE_CTL		0x058 0x000 ALT3 0x0
-#define VF610_PAD_PTB0__LCD34			0x058 0x000 ALT4 0x0
-#define VF610_PAD_PTB0__SAI2_RX_BCLK		0x058 0x364 ALT5 0x1
-#define VF610_PAD_PTB0__VIU_DATA18		0x058 0x000 ALT6 0x0
-#define VF610_PAD_PTB0__QSPI1_A_QPCS0		0x058 0x000 ALT7 0x0
-#define VF610_PAD_PTB1__GPIO_23			0x05C 0x000 ALT0 0x0
-#define VF610_PAD_PTB1__FTM0_CH1		0x05C 0x000 ALT1 0x0
-#define VF610_PAD_PTB1__ADC0_SE3		0x05C 0x000 ALT2 0x0
-#define VF610_PAD_PTB1__SRC_RCON30		0x05C 0x000 ALT3 0x0
-#define VF610_PAD_PTB1__LCD35			0x05C 0x000 ALT4 0x0
-#define VF610_PAD_PTB1__SAI2_RX_DATA		0x05C 0x368 ALT5 0x1
-#define VF610_PAD_PTB1__VIU_DATA19		0x05C 0x000 ALT6 0x0
-#define VF610_PAD_PTB1__QSPI1_A_DATA3		0x05C 0x000 ALT7 0x0
-#define VF610_PAD_PTB2__GPIO_24			0x060 0x000 ALT0 0x0
-#define VF610_PAD_PTB2__FTM0_CH2		0x060 0x000 ALT1 0x0
-#define VF610_PAD_PTB2__ADC1_SE2		0x060 0x000 ALT2 0x0
-#define VF610_PAD_PTB2__SRC_RCON31		0x060 0x000 ALT3 0x0
-#define VF610_PAD_PTB2__LCD36			0x060 0x000 ALT4 0x0
-#define VF610_PAD_PTB2__SAI2_RX_SYNC		0x060 0x36C ALT5 0x1
-#define VF610_PAD_PTB2__VIDEO_IN0_DATA20	0x060 0x000 ALT6 0x0
-#define VF610_PAD_PTB2__QSPI1_A_DATA2		0x060 0x000 ALT7 0x0
-#define VF610_PAD_PTB3__GPIO_25			0x064 0x000 ALT0 0x0
-#define VF610_PAD_PTB3__FTM0_CH3		0x064 0x000 ALT1 0x0
-#define VF610_PAD_PTB3__ADC1_SE3		0x064 0x000 ALT2 0x0
-#define VF610_PAD_PTB3__PDB_EXTRIG		0x064 0x000 ALT3 0x0
-#define VF610_PAD_PTB3__LCD37			0x064 0x000 ALT4 0x0
-#define VF610_PAD_PTB3__VIU_DATA21		0x064 0x000 ALT6 0x0
-#define VF610_PAD_PTB3__QSPI1_A_DATA1		0x064 0x000 ALT7 0x0
-#define VF610_PAD_PTB4__GPIO_26			0x068 0x000 ALT0 0x0
-#define VF610_PAD_PTB4__FTM0_CH4		0x068 0x000 ALT1 0x0
-#define VF610_PAD_PTB4__UART1_TX		0x068 0x380 ALT2 0x0
-#define VF610_PAD_PTB4__ADC0_SE4		0x068 0x000 ALT3 0x0
-#define VF610_PAD_PTB4__LCD38			0x068 0x000 ALT4 0x0
-#define VF610_PAD_PTB4__VIU_FID			0x068 0x3A8 ALT5 0x0
-#define VF610_PAD_PTB4__VIU_DATA22		0x068 0x000 ALT6 0x0
-#define VF610_PAD_PTB4__QSPI1_A_DATA0		0x068 0x000 ALT7 0x0
-#define VF610_PAD_PTB5__GPIO_27			0x06C 0x000 ALT0 0x0
-#define VF610_PAD_PTB5__FTM0_CH5		0x06C 0x000 ALT1 0x0
-#define VF610_PAD_PTB5__UART1_RX		0x06C 0x37C ALT2 0x0
-#define VF610_PAD_PTB5__ADC1_SE4		0x06C 0x000 ALT3 0x0
-#define VF610_PAD_PTB5__LCD39			0x06C 0x000 ALT4 0x0
-#define VF610_PAD_PTB5__VIU_DE			0x06C 0x3A4 ALT5 0x0
-#define VF610_PAD_PTB5__QSPI1_A_DQS		0x06C 0x000 ALT7 0x0
-#define VF610_PAD_PTB6__GPIO_28			0x070 0x000 ALT0 0x0
-#define VF610_PAD_PTB6__FTM0_CH6		0x070 0x000 ALT1 0x0
-#define VF610_PAD_PTB6__UART1_RTS		0x070 0x000 ALT2 0x0
-#define VF610_PAD_PTB6__QSPI0_QPCS1_A		0x070 0x000 ALT3 0x0
-#define VF610_PAD_PTB6__LCD_LCD40		0x070 0x000 ALT4 0x0
-#define VF610_PAD_PTB6__FB_CLKOUT		0x070 0x000 ALT5 0x0
-#define VF610_PAD_PTB6__VIU_HSYNC		0x070 0x000 ALT6 0x0
-#define VF610_PAD_PTB6__UART2_TX		0x070 0x38C ALT7 0x0
-#define VF610_PAD_PTB7__GPIO_29			0x074 0x000 ALT0 0x0
-#define VF610_PAD_PTB7__FTM0_CH7		0x074 0x000 ALT1 0x0
-#define VF610_PAD_PTB7__UART1_CTS		0x074 0x378 ALT2 0x0
-#define VF610_PAD_PTB7__QSPI0_B_QPCS1		0x074 0x000 ALT3 0x0
-#define VF610_PAD_PTB7__LCD41			0x074 0x000 ALT4 0x0
-#define VF610_PAD_PTB7__VIU_VSYNC		0x074 0x000 ALT6 0x0
-#define VF610_PAD_PTB7__UART2_RX		0x074 0x388 ALT7 0x0
-#define VF610_PAD_PTB8__GPIO_30			0x078 0x000 ALT0 0x0
-#define VF610_PAD_PTB8__FTM1_CH0		0x078 0x32C ALT1 0x0
-#define VF610_PAD_PTB8__FTM1_QD_PHA		0x078 0x334 ALT3 0x1
-#define VF610_PAD_PTB8__VIU_DE			0x078 0x3A4 ALT5 0x1
-#define VF610_PAD_PTB8__DCU1_R6			0x078 0x000 ALT7 0x0
-#define VF610_PAD_PTB9__GPIO_31			0x07C 0x000 ALT0 0x0
-#define VF610_PAD_PTB9__FTM1_CH1		0x07C 0x330 ALT1 0x0
-#define VF610_PAD_PTB9__FTM1_QD_PHB		0x07C 0x338 ALT3 0x1
-#define VF610_PAD_PTB9__DCU1_R7			0x07C 0x000 ALT7 0x0
-#define VF610_PAD_PTB10__GPIO_32		0x080 0x000 ALT0 0x0
-#define VF610_PAD_PTB10__UART0_TX		0x080 0x000 ALT1 0x0
-#define VF610_PAD_PTB10__DCU0_TCON4		0x080 0x000 ALT4 0x0
-#define VF610_PAD_PTB10__VIU_DE			0x080 0x3A4 ALT5 0x2
-#define VF610_PAD_PTB10__CKO1			0x080 0x000 ALT6 0x0
-#define VF610_PAD_PTB10__ENET_TS_CLKIN		0x080 0x2F4 ALT7 0x1
-#define VF610_PAD_PTB11__GPIO_33		0x084 0x000 ALT0 0x0
-#define VF610_PAD_PTB11__UART0_RX		0x084 0x000 ALT1 0x0
-#define VF610_PAD_PTB11__DCU0_TCON5		0x084 0x000 ALT4 0x0
-#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B	0x084 0x000 ALT5 0x0
-#define VF610_PAD_PTB11__CKO2			0x084 0x000 ALT6 0x0
-#define VF610_PAD_PTB11_ENET0_1588_TMR0		0x084 0x304 ALT7 0x0
-#define VF610_PAD_PTB12__GPIO_34		0x088 0x000 ALT0 0x0
-#define VF610_PAD_PTB12__UART0_RTS		0x088 0x000 ALT1 0x0
-#define VF610_PAD_PTB12__DSPI0_CS5		0x088 0x000 ALT3 0x0
-#define VF610_PAD_PTB12__DCU0_TCON6		0x088 0x000 ALT4 0x0
-#define VF610_PAD_PTB12__FB_AD1			0x088 0x000 ALT5 0x0
-#define VF610_PAD_PTB12__NMI			0x088 0x000 ALT6 0x0
-#define VF610_PAD_PTB12__ENET0_1588_TMR1	0x088 0x308 ALT7 0x0
-#define VF610_PAD_PTB13__GPIO_35		0x08C 0x000 ALT0 0x0
-#define VF610_PAD_PTB13__UART0_CTS		0x08C 0x000 ALT1 0x0
-#define VF610_PAD_PTB13__DSPI0_CS4		0x08C 0x000 ALT3 0x0
-#define VF610_PAD_PTB13__DCU0_TCON7		0x08C 0x000 ALT4 0x0
-#define VF610_PAD_PTB13__FB_AD0			0x08C 0x000 ALT5 0x0
-#define VF610_PAD_PTB13__TRACE_CTL		0x08C 0x000 ALT6 0x0
-#define VF610_PAD_PTB14__GPIO_36		0x090 0x000 ALT0 0x0
-#define VF610_PAD_PTB14__CAN0_RX		0x090 0x000 ALT1 0x0
-#define VF610_PAD_PTB14__I2C0_SCL		0x090 0x33C ALT2 0x1
-#define VF610_PAD_PTB14__DCU0_TCON8		0x090 0x000 ALT4 0x0
-#define VF610_PAD_PTB14__DCU1_PCLK		0x090 0x000 ALT7 0x0
-#define VF610_PAD_PTB15__GPIO_37		0x094 0x000 ALT0 0x0
-#define VF610_PAD_PTB15__CAN0_TX		0x094 0x000 ALT1 0x0
-#define VF610_PAD_PTB15__I2C0_SDA		0x094 0x340 ALT2 0x1
-#define VF610_PAD_PTB15__DCU0_TCON9		0x094 0x000 ALT4 0x0
-#define VF610_PAD_PTB15__VIU_PIX_CLK		0x094 0x3AC ALT7 0x0
-#define VF610_PAD_PTB16__GPIO_38		0x098 0x000 ALT0 0x0
-#define VF610_PAD_PTB16__CAN1_RX		0x098 0x000 ALT1 0x0
-#define VF610_PAD_PTB16__I2C1_SCL		0x098 0x344 ALT2 0x1
-#define VF610_PAD_PTB16__DCU0_TCON10		0x098 0x000 ALT4 0x0
-#define VF610_PAD_PTB17__GPIO_39		0x09C 0x000 ALT0 0x0
-#define VF610_PAD_PTB17__CAN1_TX		0x09C 0x000 ALT1 0x0
-#define VF610_PAD_PTB17__I2C1_SDA		0x09C 0x348 ALT2 0x1
-#define VF610_PAD_PTB17__DCU0_TCON11		0x09C 0x000 ALT4 0x0
-#define VF610_PAD_PTB18__GPIO_40		0x0A0 0x000 ALT0 0x0
-#define VF610_PAD_PTB18__DSPI0_CS1		0x0A0 0x000 ALT1 0x0
-#define VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x0A0 0x2EC ALT2 0x2
-#define VF610_PAD_PTB18__VIU_DATA9		0x0A0 0x000 ALT6 0x0
-#define VF610_PAD_PTB19__GPIO_41		0x0A4 0x000 ALT0 0x0
-#define VF610_PAD_PTB19__DSPI0_CS0		0x0A4 0x000 ALT1 0x0
-#define VF610_PAD_PTB19__VIU_DATA10		0x0A4 0x000 ALT6 0x0
-#define VF610_PAD_PTB20__GPIO_42		0x0A8 0x000 ALT0 0x0
-#define VF610_PAD_PTB20__DSPI0_SIN		0x0A8 0x000 ALT1 0x0
-#define VF610_PAD_PTB20__LCD42			0x0A8 0x000 ALT4 0x0
-#define VF610_PAD_PTB20__VIU_DATA11		0x0A8 0x000 ALT6 0x0
-#define VF610_PAD_PTB21__GPIO_43		0x0AC 0x000 ALT0 0x0
-#define VF610_PAD_PTB21__DSPI0_SOUT		0x0AC 0x000 ALT1 0x0
-#define VF610_PAD_PTB21__LCD43			0x0AC 0x000 ALT4 0x0
-#define VF610_PAD_PTB21__VIU_DATA12		0x0AC 0x000 ALT6 0x0
-#define VF610_PAD_PTB21__DCU1_PCLK		0x0AC 0x000 ALT7 0x0
-#define VF610_PAD_PTB22__GPIO_44		0x0B0 0x000 ALT0 0x0
-#define VF610_PAD_PTB22__DSPI0_SCK		0x0B0 0x000 ALT1 0x0
-#define VF610_PAD_PTB22__VLCD			0x0B0 0x000 ALT4 0x0
-#define VF610_PAD_PTB22__VIU_FID		0x0B0 0x3A8 ALT5 0x1
-#define VF610_PAD_PTC0__GPIO_45			0x0B4 0x000 ALT0 0x0
-#define VF610_PAD_PTC0__ENET_RMII0_MDC		0x0B4 0x000 ALT1 0x0
-#define VF610_PAD_PTC0__FTM1_CH0		0x0B4 0x32C ALT2 0x1
-#define VF610_PAD_PTC0__DSPI0_CS3		0x0B4 0x000 ALT3 0x0
-#define VF610_PAD_PTC0__ESAI_SCKT		0x0B4 0x310 ALT4 0x0
-#define VF610_PAD_PTC0__ESDHC0_CLK		0x0B4 0x000 ALT5 0x0
-#define VF610_PAD_PTC0__VIU_DATA0		0x0B4 0x000 ALT6 0x0
-#define VF610_PAD_PTC0__SRC_RCON18		0x0B4 0x398 ALT7 0x0
-#define VF610_PAD_PTC1__GPIO_46			0x0B8 0x000 ALT0 0x0
-#define VF610_PAD_PTC1__ENET_RMII0_MDIO		0x0B8 0x000 ALT1 0x0
-#define VF610_PAD_PTC1__FTM1_CH1		0x0B8 0x330 ALT2 0x1
-#define VF610_PAD_PTC1__DSPI0_CS2		0x0B8 0x000 ALT3 0x0
-#define VF610_PAD_PTC1__ESAI_FST		0x0B8 0x30C ALT4 0x0
-#define VF610_PAD_PTC1__ESDHC0_CMD		0x0B8 0x000 ALT5 0x0
-#define VF610_PAD_PTC1__VIU_DATA1		0x0B8 0x000 ALT6 0x0
-#define VF610_PAD_PTC1__SRC_RCON19		0x0B8 0x39C ALT7 0x0
-#define VF610_PAD_PTC2__GPIO_47			0x0BC 0x000 ALT0 0x0
-#define VF610_PAD_PTC2__ENET_RMII0_CRS		0x0BC 0x000 ALT1 0x0
-#define VF610_PAD_PTC2__UART1_TX		0x0BC 0x380 ALT2 0x1
-#define VF610_PAD_PTC2__ESAI_SDO0		0x0BC 0x314 ALT4 0x0
-#define VF610_PAD_PTC2__ESDHC0_DAT0		0x0BC 0x000 ALT5 0x0
-#define VF610_PAD_PTC2__VIU_DATA2		0x0BC 0x000 ALT6 0x0
-#define VF610_PAD_PTC2__SRC_RCON20		0x0BC 0x3A0 ALT7 0x0
-#define VF610_PAD_PTC3__GPIO_48			0x0C0 0x000 ALT0 0x0
-#define VF610_PAD_PTC3__ENET_RMII0_RXD1		0x0C0 0x000 ALT1 0x0
-#define VF610_PAD_PTC3__UART1_RX		0x0C0 0x37C ALT2 0x1
-#define VF610_PAD_PTC3__ESAI_SDO1		0x0C0 0x318 ALT4 0x0
-#define VF610_PAD_PTC3__ESDHC0_DAT1		0x0C0 0x000 ALT5 0x0
-#define VF610_PAD_PTC3__VIU_DATA3		0x0C0 0x000 ALT6 0x0
-#define VF610_PAD_PTC3__DCU0_R0			0x0C0 0x000 ALT7 0x0
-#define VF610_PAD_PTC4__GPIO_49			0x0C4 0x000 ALT0 0x0
-#define VF610_PAD_PTC4__ENET_RMII0_RXD0		0x0C4 0x000 ALT1 0x0
-#define VF610_PAD_PTC4__UART1_RTS		0x0C4 0x000 ALT2 0x0
-#define VF610_PAD_PTC4__DSPI1_CS1		0x0C4 0x000 ALT3 0x0
-#define VF610_PAD_PTC4__ESAI_SDO2		0x0C4 0x31C ALT4 0x0
-#define VF610_PAD_PTC4__ESDHC0_DAT2		0x0C4 0x000 ALT5 0x0
-#define VF610_PAD_PTC4__VIU_DATA4		0x0C4 0x000 ALT6 0x0
-#define VF610_PAD_PTC4__DCU0_R1			0x0C4 0x000 ALT7 0x0
-#define VF610_PAD_PTC5__GPIO_50			0x0C8 0x000 ALT0 0x0
-#define VF610_PAD_PTC5__ENET_RMII0_RXER		0x0C8 0x000 ALT1 0x0
-#define VF610_PAD_PTC5__UART1_CTS		0x0C8 0x378 ALT2 0x1
-#define VF610_PAD_PTC5__DSPI1_CS0		0x0C8 0x300 ALT3 0x0
-#define VF610_PAD_PTC5__ESAI_SDO3		0x0C8 0x320 ALT4 0x0
-#define VF610_PAD_PTC5__ESDHC0_DAT3		0x0C8 0x000 ALT5 0x0
-#define VF610_PAD_PTC5__VIU_DATA5		0x0C8 0x000 ALT6 0x0
-#define VF610_PAD_PTC5__DCU0_G0			0x0C8 0x000 ALT7 0x0
-#define VF610_PAD_PTC6__GPIO_51			0x0CC 0x000 ALT0 0x0
-#define VF610_PAD_PTC6__ENET_RMII0_TXD1		0x0CC 0x000 ALT1 0x0
-#define VF610_PAD_PTC6__DSPI1_SIN		0x0CC 0x2FC ALT3 0x0
-#define VF610_PAD_PTC6__ESAI_SDI0		0x0CC 0x328 ALT4 0x0
-#define VF610_PAD_PTC6__ESDHC0_WP		0x0CC 0x000 ALT5 0x0
-#define VF610_PAD_PTC6__VIU_DATA6		0x0CC 0x000 ALT6 0x0
-#define VF610_PAD_PTC6__DCU0_G1			0x0CC 0x000 ALT7 0x0
-#define VF610_PAD_PTC7__GPIO_52			0x0D0 0x000 ALT0 0x0
-#define VF610_PAD_PTC7__ENET_RMII0_TXD0		0x0D0 0x000 ALT1 0x0
-#define VF610_PAD_PTC7__DSPI1_SOUT		0x0D0 0x000 ALT3 0x0
-#define VF610_PAD_PTC7__ESAI_SDI1		0x0D0 0x324 ALT4 0x0
-#define VF610_PAD_PTC7__VIU_DATA7		0x0D0 0x000 ALT6 0x0
-#define VF610_PAD_PTC7__DCU0_B0			0x0D0 0x000 ALT7 0x0
-#define VF610_PAD_PTC8__GPIO_53			0x0D4 0x000 ALT0 0x0
-#define VF610_PAD_PTC8__ENET_RMII0_TXEN		0x0D4 0x000 ALT1 0x0
-#define VF610_PAD_PTC8__DSPI1_SCK		0x0D4 0x2F8 ALT3 0x0
-#define VF610_PAD_PTC8__VIU_DATA8		0x0D4 0x000 ALT6 0x0
-#define VF610_PAD_PTC8__DCU0_B1			0x0D4 0x000 ALT7 0x0
-#define VF610_PAD_PTC9__GPIO_54			0x0D8 0x000 ALT0 0x0
-#define VF610_PAD_PTC9__ENET_RMII1_MDC		0x0D8 0x000 ALT1 0x0
-#define VF610_PAD_PTC9__ESAI_SCKT		0x0D8 0x310 ALT3 0x1
-#define VF610_PAD_PTC9__MLB_CLK			0x0D8 0x354 ALT6 0x1
-#define VF610_PAD_PTC9__DEBUG_OUT0		0x0D8 0x000 ALT7 0x0
-#define VF610_PAD_PTC10__GPIO_55		0x0DC 0x000 ALT0 0x0
-#define VF610_PAD_PTC10__ENET_RMII1_MDIO	0x0DC 0x000 ALT1 0x0
-#define VF610_PAD_PTC10__ESAI_FST		0x0DC 0x30C ALT3 0x1
-#define VF610_PAD_PTC10__MLB_SIGNAL		0x0DC 0x35C ALT6 0x1
-#define VF610_PAD_PTC10__DEBUG_OUT1		0x0DC 0x000 ALT7 0x0
-#define VF610_PAD_PTC11__GPIO_56		0x0E0 0x000 ALT0 0x0
-#define VF610_PAD_PTC11__ENET_RMII1_CRS		0x0E0 0x000 ALT1 0x0
-#define VF610_PAD_PTC11__ESAI_SDO0		0x0E0 0x314 ALT3 0x1
-#define VF610_PAD_PTC11__MLB_DATA		0x0E0 0x358 ALT6 0x1
-#define VF610_PAD_PTC11__DEBUG_OUT		0x0E0 0x000 ALT7 0x0
-#define VF610_PAD_PTC12__GPIO_57		0x0E4 0x000 ALT0 0x0
-#define VF610_PAD_PTC12__ENET_RMII_RXD1		0x0E4 0x000 ALT1 0x0
-#define VF610_PAD_PTC12__ESAI_SDO1		0x0E4 0x318 ALT3 0x1
-#define VF610_PAD_PTC12__SAI2_TX_BCLK		0x0E4 0x370 ALT5 0x1
-#define VF610_PAD_PTC12__DEBUG_OUT3		0x0E4 0x000 ALT7 0x0
-#define VF610_PAD_PTC13__GPIO_58		0x0E8 0x000 ALT0 0x0
-#define VF610_PAD_PTC13__ENET_RMII1_RXD0	0x0E8 0x000 ALT1 0x0
-#define VF610_PAD_PTC13__ESAI_SDO2		0x0E8 0x31C ALT3 0x1
-#define VF610_PAD_PTC13__SAI2_RX_BCLK		0x0E8 0x364 ALT5 0x2
-#define VF610_PAD_PTC13__DEBUG_OUT4		0x0E8 0x000 ALT7 0x0
-#define VF610_PAD_PTC14__GPIO_59		0x0EC 0x000 ALT0 0x0
-#define VF610_PAD_PTC14__ENET_RMII1_RXER	0x0EC 0x000 ALT1 0x0
-#define VF610_PAD_PTC14__ESAI_SDO3		0x0EC 0x320 ALT3 0x1
-#define VF610_PAD_PTC14__UART5_TX		0x0EC 0x000 ALT4 0x0
-#define VF610_PAD_PTC14__SAI2_RX_DATA		0x0EC 0x368 ALT5 0x2
-#define VF610_PAD_PTC14__ADC0_SE6		0x0EC 0x000 ALT6 0x0
-#define VF610_PAD_PTC14__DEBUG_OUT5		0x0EC 0x000 ALT7 0x0
-#define VF610_PAD_PTC15__GPIO_60		0x0F0 0x000 ALT0 0x0
-#define VF610_PAD_PTC15__ENET_RMII1_TXD1	0x0F0 0x000 ALT1 0x0
-#define VF610_PAD_PTC15__ESAI_SDI0		0x0F0 0x328 ALT3 0x1
-#define VF610_PAD_PTC15__UART5_RX		0x0F0 0x000 ALT4 0x0
-#define VF610_PAD_PTC15__SAI2_TX_DATA		0x0F0 0x000 ALT5 0x0
-#define VF610_PAD_PTC15__ADC0_SE7		0x0F0 0x000 ALT6 0x0
-#define VF610_PAD_PTC15__DEBUG_OUT6		0x0F0 0x000 ALT7 0x0
-#define VF610_PAD_PTC16__GPIO_61		0x0F4 0x000 ALT0 0x0
-#define VF610_PAD_PTC16__ENET_RMII1_TXD0	0x0F4 0x000 ALT1 0x0
-#define VF610_PAD_PTC16__ESAI_SDI1		0x0F4 0x324 ALT3 0x1
-#define VF610_PAD_PTC16__UART5_RTS		0x0F4 0x000 ALT4 0x0
-#define VF610_PAD_PTC16__SAI2_RX_SYNC		0x0F4 0x36C ALT5 0x2
-#define VF610_PAD_PTC16__ADC1_SE6		0x0F4 0x000 ALT6 0x0
-#define VF610_PAD_PTC16__DEBUG_OUT7		0x0F4 0x000 ALT7 0x0
-#define VF610_PAD_PTC17__GPIO_62		0x0F8 0x000 ALT0 0x0
-#define VF610_PAD_PTC17__ENET_RMII1_TXEN	0x0F8 0x000 ALT1 0x0
-#define VF610_PAD_PTC17__ADC1_SE7		0x0F8 0x000 ALT3 0x0
-#define VF610_PAD_PTC17__UART5_CTS		0x0F8 0x000 ALT4 0x0
-#define VF610_PAD_PTC17__SAI2_TX_SYNC		0x0F8 0x374 ALT5 0x1
-#define VF610_PAD_PTC17__USB1_SOF_PULSE		0x0F8 0x000 ALT6 0x0
-#define VF610_PAD_PTC17__DEBUG_OUT8		0x0F8 0x000 ALT7 0x0
-#define VF610_PAD_PTD31__GPIO_63		0x0FC 0x000 ALT0 0x0
-#define VF610_PAD_PTD31__FB_AD31		0x0FC 0x000 ALT1 0x0
-#define VF610_PAD_PTD31__NF_IO15		0x0FC 0x000 ALT2 0x0
-#define VF610_PAD_PTD31__FTM3_CH0		0x0FC 0x000 ALT4 0x0
-#define VF610_PAD_PTD31__DSPI2_CS1		0x0FC 0x000 ALT5 0x0
-#define VF610_PAD_PTD31__DEBUG_OUT9		0x0FC 0x000 ALT7 0x0
-#define VF610_PAD_PTD30__GPIO_64		0x100 0x000 ALT0 0x0
-#define VF610_PAD_PTD30__FB_AD30		0x100 0x000 ALT1 0x0
-#define VF610_PAD_PTD30__NF_IO14		0x100 0x000 ALT2 0x0
-#define VF610_PAD_PTD30__FTM3_CH1		0x100 0x000 ALT4 0x0
-#define VF610_PAD_PTD30__DSPI2_CS0		0x100 0x000 ALT5 0x0
-#define VF610_PAD_PTD30__DEBUG_OUT10		0x100 0x000 ALT7 0x0
-#define VF610_PAD_PTD29__GPIO_65		0x104 0x000 ALT0 0x0
-#define VF610_PAD_PTD29__FB_AD29		0x104 0x000 ALT1 0x0
-#define VF610_PAD_PTD29__NF_IO13		0x104 0x000 ALT2 0x0
-#define VF610_PAD_PTD29__FTM3_CH2		0x104 0x000 ALT4 0x0
-#define VF610_PAD_PTD29__DSPI2_SIN		0x104 0x000 ALT5 0x0
-#define VF610_PAD_PTD29__DEBUG_OUT11		0x104 0x000 ALT7 0x0
-#define VF610_PAD_PTD28__GPIO_66	 	0x108 0x000 ALT0 0x0
-#define VF610_PAD_PTD28__FB_AD28		0x108 0x000 ALT1 0x0
-#define VF610_PAD_PTD28__NF_IO12		0x108 0x000 ALT2 0x0
-#define VF610_PAD_PTD28__I2C2_SCL		0x108 0x34C ALT3 0x1
-#define VF610_PAD_PTD28__FTM3_CH3		0x108 0x000 ALT4 0x0
-#define VF610_PAD_PTD28__DSPI2_SOUT		0x108 0x000 ALT5 0x0
-#define VF610_PAD_PTD28__DEBUG_OUT12		0x108 0x000 ALT7 0x0
-#define VF610_PAD_PTD27__GPIO_67		0x10C 0x000 ALT0 0x0
-#define VF610_PAD_PTD27__FB_AD27		0x10C 0x000 ALT1 0x0
-#define VF610_PAD_PTD27__NF_IO11		0x10C 0x000 ALT2 0x0
-#define VF610_PAD_PTD27__I2C2_SDA		0x10C 0x350 ALT3 0x1
-#define VF610_PAD_PTD27__FTM3_CH4		0x10C 0x000 ALT4 0x0
-#define VF610_PAD_PTD27__DSPI2_SCK		0x10C 0x000 ALT5 0x0
-#define VF610_PAD_PTD27__DEBUG_OUT13		0x10C 0x000 ALT7 0x0
-#define VF610_PAD_PTD26__GPIO_68		0x110 0x000 ALT0 0x0
-#define VF610_PAD_PTD26__FB_AD26		0x110 0x000 ALT1 0x0
-#define VF610_PAD_PTD26__NF_IO10		0x110 0x000 ALT2 0x0
-#define VF610_PAD_PTD26__FTM3_CH5		0x110 0x000 ALT4 0x0
-#define VF610_PAD_PTD26__ESDHC1_WP		0x110 0x000 ALT5 0x0
-#define VF610_PAD_PTD26__DEBUG_OUT14		0x110 0x000 ALT7 0x0
-#define VF610_PAD_PTD25__GPIO_69		0x114 0x000 ALT0 0x0
-#define VF610_PAD_PTD25__FB_AD25		0x114 0x000 ALT1 0x0
-#define VF610_PAD_PTD25__NF_IO9			0x114 0x000 ALT2 0x0
-#define VF610_PAD_PTD25__FTM3_CH6		0x114 0x000 ALT4 0x0
-#define VF610_PAD_PTD25__DEBUG_OUT15		0x114 0x000 ALT7 0x0
-#define VF610_PAD_PTD24__GPIO_70		0x118 0x000 ALT0 0x0
-#define VF610_PAD_PTD24__FB_AD24		0x118 0x000 ALT1 0x0
-#define VF610_PAD_PTD24__NF_IO8			0x118 0x000 ALT2 0x0
-#define VF610_PAD_PTD24__FTM3_CH7		0x118 0x000 ALT4 0x0
-#define VF610_PAD_PTD24__DEBUG_OUT16		0x118 0x000 ALT7 0x0
-#define VF610_PAD_PTD23__GPIO_71		0x11C 0x000 ALT0 0x0
-#define VF610_PAD_PTD23__FB_AD23		0x11C 0x000 ALT1 0x0
-#define VF610_PAD_PTD23__NF_IO7			0x11C 0x000 ALT2 0x0
-#define VF610_PAD_PTD23__FTM2_CH0		0x11C 0x000 ALT3 0x0
-#define VF610_PAD_PTD23__ENET0_1588_TMR0	0x11C 0x304 ALT4 0x1
-#define VF610_PAD_PTD23__ESDHC0_DAT4		0x11C 0x000 ALT5 0x0
-#define VF610_PAD_PTD23__UART2_TX		0x11C 0x38C ALT6 0x1
-#define VF610_PAD_PTD23__DCU1_R3		0x11C 0x000 ALT7 0x0
-#define VF610_PAD_PTD22__GPIO_72		0x120 0x000 ALT0 0x0
-#define VF610_PAD_PTD22__FB_AD22		0x120 0x000 ALT1 0x0
-#define VF610_PAD_PTD22__NF_IO6			0x120 0x000 ALT2 0x0
-#define VF610_PAD_PTD22__FTM2_CH1		0x120 0x000 ALT3 0x0
-#define VF610_PAD_PTD22__ENET0_1588_TMR1	0x120 0x308 ALT4 0x1
-#define VF610_PAD_PTD22__ESDHC0_DAT5		0x120 0x000 ALT5 0x0
-#define VF610_PAD_PTD22__UART2_RX		0x120 0x388 ALT6 0x1
-#define VF610_PAD_PTD22__DCU1_R4		0x120 0x000 ALT7 0x0
-#define VF610_PAD_PTD21__GPIO_73		0x124 0x000 ALT0 0x0
-#define VF610_PAD_PTD21__FB_AD21		0x124 0x000 ALT1 0x0
-#define VF610_PAD_PTD21__NF_IO5			0x124 0x000 ALT2 0x0
-#define VF610_PAD_PTD21__ENET0_1588_TMR2	0x124 0x000 ALT4 0x0
-#define VF610_PAD_PTD21__ESDHC0_DAT6		0x124 0x000 ALT5 0x0
-#define VF610_PAD_PTD21__UART2_RTS		0x124 0x000 ALT6 0x0
-#define VF610_PAD_PTD21__DCU1_R5		0x124 0x000 ALT7 0x0
-#define VF610_PAD_PTD20__GPIO_74		0x128 0x000 ALT0 0x0
-#define VF610_PAD_PTD20__FB_AD20		0x128 0x000 ALT1 0x0
-#define VF610_PAD_PTD20__NF_IO4			0x128 0x000 ALT2 0x0
-#define VF610_PAD_PTD20__ENET0_1588_TMR3	0x128 0x000 ALT4 0x0
-#define VF610_PAD_PTD20__ESDHC0_DAT7		0x128 0x000 ALT5 0x0
-#define VF610_PAD_PTD20__UART2_CTS		0x128 0x384 ALT6 0x0
-#define VF610_PAD_PTD20__DCU1_R0		0x128 0x000 ALT7 0x0
-#define VF610_PAD_PTD19__GPIO_75		0x12C 0x000 ALT0 0x0
-#define VF610_PAD_PTD19__FB_AD19		0x12C 0x000 ALT1 0x0
-#define VF610_PAD_PTD19__NF_IO3			0x12C 0x000 ALT2 0x0
-#define VF610_PAD_PTD19__ESAI_SCKR		0x12C 0x000 ALT3 0x0
-#define VF610_PAD_PTD19__I2C0_SCL		0x12C 0x33C ALT4 0x2
-#define VF610_PAD_PTD19__FTM2_QD_PHA		0x12C 0x000 ALT5 0x0
-#define VF610_PAD_PTD19__DCU1_R1		0x12C 0x000 ALT7 0x0
-#define VF610_PAD_PTD18__GPIO_76		0x130 0x000 ALT0 0x0
-#define VF610_PAD_PTD18__FB_AD18		0x130 0x000 ALT1 0x0
-#define VF610_PAD_PTD18__NF_IO2			0x130 0x000 ALT2 0x0
-#define VF610_PAD_PTD18__ESAI_FSR		0x130 0x000 ALT3 0x0
-#define VF610_PAD_PTD18__I2C0_SDA		0x130 0x340 ALT4 0x2
-#define VF610_PAD_PTD18__FTM2_QD_PHB		0x130 0x000 ALT5 0x0
-#define VF610_PAD_PTD18__DCU1_G0		0x130 0x000 ALT7 0x0
-#define VF610_PAD_PTD17__GPIO_77		0x134 0x000 ALT0 0x0
-#define VF610_PAD_PTD17__FB_AD17		0x134 0x000 ALT1 0x0
-#define VF610_PAD_PTD17__NF_IO1			0x134 0x000 ALT2 0x0
-#define VF610_PAD_PTD17__ESAI_HCKR		0x134 0x000 ALT3 0x0
-#define VF610_PAD_PTD17__I2C1_SCL		0x134 0x344 ALT4 0x2
-#define VF610_PAD_PTD17__DCU1_G1		0x134 0x000 ALT7 0x0
-#define VF610_PAD_PTD16__GPIO_78		0x138 0x000 ALT0 0x0
-#define VF610_PAD_PTD16__FB_AD16		0x138 0x000 ALT1 0x0
-#define VF610_PAD_PTD16__NF_IO0			0x138 0x000 ALT2 0x0
-#define VF610_PAD_PTD16__ESAI_HCKT		0x138 0x000 ALT3 0x0
-#define VF610_PAD_PTD16__I2C1_SDA		0x138 0x348 ALT4 0x2
-#define VF610_PAD_PTD16__DCU1_G2		0x138 0x000 ALT7 0x0
-#define VF610_PAD_PTD0__GPIO_79			0x13C 0x000 ALT0 0x0
-#define VF610_PAD_PTD0__QSPI0_A_QSCK		0x13C 0x000 ALT1 0x0
-#define VF610_PAD_PTD0__UART2_TX		0x13C 0x38C ALT2 0x2
-#define VF610_PAD_PTD0__FB_AD15			0x13C 0x000 ALT4 0x0
-#define VF610_PAD_PTD0__SPDIF_EXTCLK		0x13C 0x000 ALT5 0x0
-#define VF610_PAD_PTD0__DEBUG_OUT17		0x13C 0x000 ALT7 0x0
-#define VF610_PAD_PTD1__GPIO_80			0x140 0x000 ALT0 0x0
-#define VF610_PAD_PTD1__QSPI0_A_CS0		0x140 0x000 ALT1 0x0
-#define VF610_PAD_PTD1__UART2_RX		0x140 0x388 ALT2 0x2
-#define VF610_PAD_PTD1__FB_AD14			0x140 0x000 ALT4 0x0
-#define VF610_PAD_PTD1__SPDIF_IN1		0x140 0x000 ALT5 0x0
-#define VF610_PAD_PTD1__DEBUG_OUT18		0x140 0x000 ALT7 0x0
-#define VF610_PAD_PTD2__GPIO_81			0x144 0x000 ALT0 0x0
-#define VF610_PAD_PTD2__QSPI0_A_DATA3		0x144 0x000 ALT1 0x0
-#define VF610_PAD_PTD2__UART2_RTS		0x144 0x000 ALT2 0x0
-#define VF610_PAD_PTD2__DSPI1_CS3		0x144 0x000 ALT3 0x0
-#define VF610_PAD_PTD2__FB_AD13			0x144 0x000 ALT4 0x0
-#define VF610_PAD_PTD2__SPDIF_OUT1		0x144 0x000 ALT5 0x0
-#define VF610_PAD_PTD2__DEBUG_OUT19		0x144 0x000 ALT7 0x0
-#define VF610_PAD_PTD3__GPIO_82			0x148 0x000 ALT0 0x0
-#define VF610_PAD_PTD3__QSPI0_A_DATA2		0x148 0x000 ALT1 0x0
-#define VF610_PAD_PTD3__UART2_CTS		0x148 0x384 ALT2 0x1
-#define VF610_PAD_PTD3__DSPI1_CS2		0x148 0x000 ALT3 0x0
-#define VF610_PAD_PTD3__FB_AD12			0x148 0x000 ALT4 0x0
-#define VF610_PAD_PTD3__SPDIF_PLOCK		0x148 0x000 ALT5 0x0
-#define VF610_PAD_PTD3__DEBUG_OUT20		0x148 0x000 ALT7 0x0
-#define VF610_PAD_PTD4__GPIO_83			0x14C 0x000 ALT0 0x0
-#define VF610_PAD_PTD4__QSPI0_A_DATA1		0x14C 0x000 ALT1 0x0
-#define VF610_PAD_PTD4__DSPI1_CS1		0x14C 0x000 ALT3 0x0
-#define VF610_PAD_PTD4__FB_AD11			0x14C 0x000 ALT4 0x0
-#define VF610_PAD_PTD4__SPDIF_SRCLK		0x14C 0x000 ALT5 0x0
-#define VF610_PAD_PTD4__DEBUG_OUT21		0x14C 0x000 ALT7 0x0
-#define VF610_PAD_PTD5__GPIO_84			0x150 0x000 ALT0 0x0
-#define VF610_PAD_PTD5__QSPI0_A_DATA0		0x150 0x000 ALT1 0x0
-#define VF610_PAD_PTD5__DSPI1_CS0		0x150 0x300 ALT3 0x1
-#define VF610_PAD_PTD5__FB_AD10			0x150 0x000 ALT4 0x0
-#define VF610_PAD_PTD5__DEBUG_OUT22		0x150 0x000 ALT7 0x0
-#define VF610_PAD_PTD6__GPIO_85			0x154 0x000 ALT0 0x0
-#define VF610_PAD_PTD6__QSPI1_A_DQS		0x154 0x000 ALT1 0x0
-#define VF610_PAD_PTD6__DSPI1_SIN		0x154 0x2FC ALT3 0x1
-#define VF610_PAD_PTD6__FB_AD9			0x154 0x000 ALT4 0x0
-#define VF610_PAD_PTD6__DEBUG_OUT23		0x154 0x000 ALT7 0x0
-#define VF610_PAD_PTD7__GPIO_86			0x158 0x000 ALT0 0x0
-#define VF610_PAD_PTD7__QSPI0_B_QSCK		0x158 0x000 ALT1 0x0
-#define VF610_PAD_PTD7__DSPI1_SOUT		0x158 0x000 ALT3 0x0
-#define VF610_PAD_PTD7__FB_AD8			0x158 0x000 ALT4 0x0
-#define VF610_PAD_PTD7__DEBUG_OUT24		0x158 0x000 ALT7 0x0
-#define VF610_PAD_PTD8__GPIO_87			0x15C 0x000 ALT0 0x0
-#define VF610_PAD_PTD8__QSPI0_B_CS0		0x15C 0x000 ALT1 0x0
-#define VF610_PAD_PTD8__FB_CLKOUT		0x15C 0x000 ALT2 0x0
-#define VF610_PAD_PTD8__DSPI1_SCK		0x15C 0x2F8 ALT3 0x1
-#define VF610_PAD_PTD8__FB_AD7			0x15C 0x000 ALT4 0x0
-#define VF610_PAD_PTD8__DEBUG_OUT25		0x15C 0x000 ALT7 0x0
-#define VF610_PAD_PTD9__GPIO_88			0x160 0x000 ALT0 0x0
-#define VF610_PAD_PTD9__QSPI0_B_DATA3		0x160 0x000 ALT1 0x0
-#define VF610_PAD_PTD9__DSPI3_CS1		0x160 0x000 ALT2 0x0
-#define VF610_PAD_PTD9__FB_AD6			0x160 0x000 ALT4 0x0
-#define VF610_PAD_PTD9__SAI1_TX_SYNC		0x160 0x360 ALT6 0x0
-#define VF610_PAD_PTD9__DCU1_B0			0x160 0x000 ALT7 0x0
-#define VF610_PAD_PTD10__GPIO_89		0x164 0x000 ALT0 0x0
-#define VF610_PAD_PTD10__QSPI0_B_DATA2		0x164 0x000 ALT1 0x0
-#define VF610_PAD_PTD10__DSPI3_CS0		0x164 0x000 ALT2 0x0
-#define VF610_PAD_PTD10__FB_AD5			0x164 0x000 ALT4 0x0
-#define VF610_PAD_PTD10__DCU1_B1		0x164 0x000 ALT7 0x0
-#define VF610_PAD_PTD11__GPIO_90		0x168 0x000 ALT0 0x0
-#define VF610_PAD_PTD11__QSPI0_B_DATA1		0x168 0x000 ALT1 0x0
-#define VF610_PAD_PTD11__DSPI3_SIN		0x168 0x000 ALT2 0x0
-#define VF610_PAD_PTD11__FB_AD4			0x168 0x000 ALT4 0x0
-#define VF610_PAD_PTD11__DEBUG_OUT26		0x168 0x000 ALT7 0x0
-#define VF610_PAD_PTD12__GPIO_91		0x16C 0x000 ALT0 0x0
-#define VF610_PAD_PTD12__QSPI0_B_DATA0		0x16C 0x000 ALT1 0x0
-#define VF610_PAD_PTD12__DSPI3_SOUT		0x16C 0x000 ALT2 0x0
-#define VF610_PAD_PTD12__FB_AD3			0x16C 0x000 ALT4 0x0
-#define VF610_PAD_PTD12__DEBUG_OUT27		0x16C 0x000 ALT7 0x0
-#define VF610_PAD_PTD13__GPIO_92		0x170 0x000 ALT0 0x0
-#define VF610_PAD_PTD13__QSPI0_B_DQS		0x170 0x000 ALT1 0x0
-#define VF610_PAD_PTD13__DSPI3_SCK		0x170 0x000 ALT2 0x0
-#define VF610_PAD_PTD13__FB_AD2			0x170 0x000 ALT4 0x0
-#define VF610_PAD_PTD13__DEBUG_OUT28		0x170 0x000 ALT7 0x0
-#define VF610_PAD_PTB23__GPIO_93		0x174 0x000 ALT0 0x0
-#define VF610_PAD_PTB23__SAI0_TX_BCLK		0x174 0x000 ALT1 0x0
-#define VF610_PAD_PTB23__UART1_TX		0x174 0x380 ALT2 0x2
-#define VF610_PAD_PTB23__SRC_RCON18		0x174 0x398 ALT3 0x1
-#define VF610_PAD_PTB23__FB_MUXED_ALE		0x174 0x000 ALT4 0x0
-#define VF610_PAD_PTB23__FB_TS_B		0x174 0x000 ALT5 0x0
-#define VF610_PAD_PTB23__UART3_RTS		0x174 0x000 ALT6 0x0
-#define VF610_PAD_PTB23__DCU1_G3		0x174 0x000 ALT7 0x0
-#define VF610_PAD_PTB24__GPIO_94		0x178 0x000 ALT0 0x0
-#define VF610_PAD_PTB24__SAI0_RX_BCLK		0x178 0x000 ALT1 0x0
-#define VF610_PAD_PTB24__UART1_RX		0x178 0x37C ALT2 0x2
-#define VF610_PAD_PTB24__SRC_RCON19		0x178 0x39C ALT3 0x1
-#define VF610_PAD_PTB24__FB_MUXED_TSIZ0		0x178 0x000 ALT4 0x0
-#define VF610_PAD_PTB24__NF_WE_B		0x178 0x000 ALT5 0x0
-#define VF610_PAD_PTB24__UART3_CTS		0x178 0x000 ALT6 0x0
-#define VF610_PAD_PTB24__DCU1_G4		0x178 0x000 ALT7 0x0
-#define VF610_PAD_PTB25__GPIO_95		0x17C 0x000 ALT0 0x0
-#define VF610_PAD_PTB25__SAI0_RX_DATA		0x17C 0x000 ALT1 0x0
-#define VF610_PAD_PTB25__UART1_RTS		0x17C 0x000 ALT2 0x0
-#define VF610_PAD_PTB25__SRC_RCON20		0x17C 0x3A0 ALT3 0x1
-#define VF610_PAD_PTB25__FB_CS1_B		0x17C 0x000 ALT4 0x0
-#define VF610_PAD_PTB25__NF_CE0_B		0x17C 0x000 ALT5 0x0
-#define VF610_PAD_PTB25__DCU1_G5		0x17C 0x000 ALT7 0x0
-#define VF610_PAD_PTB26__GPIO_96		0x180 0x000 ALT0 0x0
-#define VF610_PAD_PTB26__SAI0_TX_DATA		0x180 0x000 ALT1 0x0
-#define VF610_PAD_PTB26__UART1_CTS		0x180 0x378 ALT2 0x2
-#define VF610_PAD_PTB26__SRC_RCON21		0x180 0x000 ALT3 0x0
-#define VF610_PAD_PTB26__FB_CS0_B		0x180 0x000 ALT4 0x0
-#define VF610_PAD_PTB26__NF_CE1_B		0x180 0x000 ALT5 0x0
-#define VF610_PAD_PTB26__DCU1_G6		0x180 0x000 ALT7 0x0
-#define VF610_PAD_PTB27__GPIO_97		0x184 0x000 ALT0 0x0
-#define VF610_PAD_PTB27__SAI0_RX_SYNC		0x184 0x000 ALT1 0x0
-#define VF610_PAD_PTB27__SRC_RCON22		0x184 0x000 ALT3 0x0
-#define VF610_PAD_PTB27__FB_OE_B		0x184 0x000 ALT4 0x0
-#define VF610_PAD_PTB27__FB_MUXED_TBST_B	0x184 0x000 ALT5 0x0
-#define VF610_PAD_PTB27__NF_RE_B		0x184 0x000 ALT6 0x0
-#define VF610_PAD_PTB27__DCU1_G7		0x184 0x000 ALT7 0x0
-#define VF610_PAD_PTB28__GPIO_98		0x188 0x000 ALT0 0x0
-#define VF610_PAD_PTB28__SAI0_TX_SYNC		0x188 0x000 ALT1 0x0
-#define VF610_PAD_PTB28__SRC_RCON23		0x188 0x000 ALT3 0x0
-#define VF610_PAD_PTB28__FB_RW_B		0x188 0x000 ALT4 0x0
-#define VF610_PAD_PTB28__DCU1_B6		0x188 0x000 ALT7 0x0
-#define VF610_PAD_PTC26__GPIO_99		0x18C 0x000 ALT0 0x0
-#define VF610_PAD_PTC26__SAI1_TX_BCLK		0x18C 0x000 ALT1 0x0
-#define VF610_PAD_PTC26__DSPI0_CS5		0x18C 0x000 ALT2 0x0
-#define VF610_PAD_PTC26__SRC_RCON24		0x18C 0x000 ALT3 0x0
-#define VF610_PAD_PTC26__FB_TA_B		0x18C 0x000 ALT4 0x0
-#define VF610_PAD_PTC26__NF_RB_B		0x18C 0x000 ALT5 0x0
-#define VF610_PAD_PTC26__DCU1_B7		0x18C 0x000 ALT7 0x0
-#define VF610_PAD_PTC27__GPIO_100		0x190 0x000 ALT0 0x0
-#define VF610_PAD_PTC27__SAI1_RX_BCLK		0x190 0x000 ALT1 0x0
-#define VF610_PAD_PTC27__DSPI0_CS4		0x190 0x000 ALT2 0x0
-#define VF610_PAD_PTC27__SRC_RCON25		0x190 0x000 ALT3 0x0
-#define VF610_PAD_PTC27__FB_BE3_B		0x190 0x000 ALT4 0x0
-#define VF610_PAD_PTC27__FB_CS3_B		0x190 0x000 ALT5 0x0
-#define VF610_PAD_PTC27__NF_ALE			0x190 0x000 ALT6 0x0
-#define VF610_PAD_PTC27__DCU1_B2		0x190 0x000 ALT7 0x0
-#define VF610_PAD_PTC28__GPIO_101		0x194 0x000 ALT0 0x0
-#define VF610_PAD_PTC28__SAI1_RX_DATA		0x194 0x000 ALT1 0x0
-#define VF610_PAD_PTC28__DSPI0_CS3		0x194 0x000 ALT2 0x0
-#define VF610_PAD_PTC28__SRC_RCON26		0x194 0x000 ALT3 0x0
-#define VF610_PAD_PTC28__FB_BE2_B		0x194 0x000 ALT4 0x0
-#define VF610_PAD_PTC28__FB_CS2_B		0x194 0x000 ALT5 0x0
-#define VF610_PAD_PTC28__NF_CLE			0x194 0x000 ALT6 0x0
-#define VF610_PAD_PTC28__DCU1_B3		0x194 0x000 ALT7 0x0
-#define VF610_PAD_PTC29__GPIO_102		0x198 0x000 ALT0 0x0
-#define VF610_PAD_PTC29__SAI1_TX_DATA		0x198 0x000 ALT1 0x0
-#define VF610_PAD_PTC29__DSPI0_CS2		0x198 0x000 ALT2 0x0
-#define VF610_PAD_PTC29__SRC_RCON27		0x198 0x000 ALT3 0x0
-#define VF610_PAD_PTC29__FB_BE1_B		0x198 0x000 ALT4 0x0
-#define VF610_PAD_PTC29__FB_MUXED_TSIZE1	0x198 0x000 ALT5 0x0
-#define VF610_PAD_PTC29__DCU1_B4		0x198 0x000 ALT7 0x0
-#define VF610_PAD_PTC30__GPIO_103		0x19C 0x000 ALT0 0x0
-#define VF610_PAD_PTC30__SAI1_RX_SYNC		0x19C 0x000 ALT1 0x0
-#define VF610_PAD_PTC30__DSPI1_CS2		0x19C 0x000 ALT2 0x0
-#define VF610_PAD_PTC30__SRC_RCON28		0x19C 0x000 ALT3 0x0
-#define VF610_PAD_PTC30__FB_MUXED_BE0_B		0x19C 0x000 ALT4 0x0
-#define VF610_PAD_PTC30__FB_TSIZ0		0x19C 0x000 ALT5 0x0
-#define VF610_PAD_PTC30__ADC0_SE5		0x19C 0x000 ALT6 0x0
-#define VF610_PAD_PTC30__DCU1_B5		0x19C 0x000 ALT7 0x0
-#define VF610_PAD_PTC31__GPIO_104		0x1A0 0x000 ALT0 0x0
-#define VF610_PAD_PTC31__SAI1_TX_SYNC		0x1A0 0x360 ALT1 0x1
-#define VF610_PAD_PTC31__SRC_RCON29		0x1A0 0x000 ALT3 0x0
-#define VF610_PAD_PTC31__ADC1_SE5		0x1A0 0x000 ALT6 0x0
-#define VF610_PAD_PTC31__DCU1_B6		0x1A0 0x000 ALT7 0x0
-#define VF610_PAD_PTE0__GPIO_105		0x1A4 0x000 ALT0 0x0
-#define VF610_PAD_PTE0__DCU0_HSYNC		0x1A4 0x000 ALT1 0x0
-#define VF610_PAD_PTE0__SRC_BMODE1		0x1A4 0x000 ALT2 0x0
-#define VF610_PAD_PTE0__LCD0			0x1A4 0x000 ALT4 0x0
-#define VF610_PAD_PTE0__DEBUG_OUT29		0x1A4 0x000 ALT7 0x0
-#define VF610_PAD_PTE1__GPIO_106		0x1A8 0x000 ALT0 0x0
-#define VF610_PAD_PTE1__DCU0_VSYNC		0x1A8 0x000 ALT1 0x0
-#define VF610_PAD_PTE1__SRC_BMODE0		0x1A8 0x000 ALT2 0x0
-#define VF610_PAD_PTE1__LCD1			0x1A8 0x000 ALT4 0x0
-#define VF610_PAD_PTE1__DEBUG_OUT30		0x1A8 0x000 ALT7 0x0
-#define VF610_PAD_PTE2__GPIO_107		0x1AC 0x000 ALT0 0x0
-#define VF610_PAD_PTE2__DCU0_PCLK		0x1AC 0x000 ALT1 0x0
-#define VF610_PAD_PTE2__LCD2			0x1AC 0x000 ALT4 0x0
-#define VF610_PAD_PTE2__DEBUG_OUT31		0x1AC 0x000 ALT7 0x0
-#define VF610_PAD_PTE3__GPIO_108		0x1B0 0x000 ALT0 0x0
-#define VF610_PAD_PTE3__DCU0_TAG		0x1B0 0x000 ALT1 0x0
-#define VF610_PAD_PTE3__LCD3			0x1B0 0x000 ALT4 0x0
-#define VF610_PAD_PTE3__DEBUG_OUT32		0x1B0 0x000 ALT7 0x0
-#define VF610_PAD_PTE4__GPIO_109		0x1B4 0x000 ALT0 0x0
-#define VF610_PAD_PTE4__DCU0_DE			0x1B4 0x000 ALT1 0x0
-#define VF610_PAD_PTE4__LCD4			0x1B4 0x000 ALT4 0x0
-#define VF610_PAD_PTE4__DEBUG_OUT33		0x1B4 0x000 ALT7 0x0
-#define VF610_PAD_PTE5__GPIO_110		0x1B8 0x000 ALT0 0x0
-#define VF610_PAD_PTE5__DCU0_R0			0x1B8 0x000 ALT1 0x0
-#define VF610_PAD_PTE5__LCD5			0x1B8 0x000 ALT4 0x0
-#define VF610_PAD_PTE5__DEBUG_OUT34		0x1B8 0x000 ALT7 0x0
-#define VF610_PAD_PTE6__GPIO_111		0x1BC 0x000 ALT0 0x0
-#define VF610_PAD_PTE6__DCU0_R1			0x1BC 0x000 ALT1 0x0
-#define VF610_PAD_PTE6__LCD6			0x1BC 0x000 ALT4 0x0
-#define VF610_PAD_PTE6__DEBUG_OUT35		0x1BC 0x000 ALT7 0x0
-#define VF610_PAD_PTE7__GPIO_112		0x1C0 0x000 ALT0 0x0
-#define VF610_PAD_PTE7__DCU0_R2			0x1C0 0x000 ALT1 0x0
-#define VF610_PAD_PTE7__SRC_RCON0		0x1C0 0x000 ALT3 0x0
-#define VF610_PAD_PTE7__LCD7			0x1C0 0x000 ALT4 0x0
-#define VF610_PAD_PTE7__DEBUG_OUT36		0x1C0 0x000 ALT7 0x0
-#define VF610_PAD_PTE8__GPIO_113		0x1C4 0x000 ALT0 0x0
-#define VF610_PAD_PTE8__DCU0_R3			0x1C4 0x000 ALT1 0x0
-#define VF610_PAD_PTE8__SRC_RCON1		0x1C4 0x000 ALT3 0x0
-#define VF610_PAD_PTE8__LCD8			0x1C4 0x000 ALT4 0x0
-#define VF610_PAD_PTE8__DEBUG_OUT37		0x1C4 0x000 ALT7 0x0
-#define VF610_PAD_PTE9__GPIO_114		0x1C8 0x000 ALT0 0x0
-#define VF610_PAD_PTE9__DCU0_R4			0x1C8 0x000 ALT1 0x0
-#define VF610_PAD_PTE9__SRC_RCON2		0x1C8 0x000 ALT3 0x0
-#define VF610_PAD_PTE9__LCD9			0x1C8 0x000 ALT4 0x0
-#define VF610_PAD_PTE9__DEBUG_OUT38		0x1C8 0x000 ALT7 0x0
-#define VF610_PAD_PTE10__GPIO_115		0x1CC 0x000 ALT0 0x0
-#define VF610_PAD_PTE10__DCU0_R5		0x1CC 0x000 ALT1 0x0
-#define VF610_PAD_PTE10__SRC_RCON3		0x1CC 0x000 ALT3 0x0
-#define VF610_PAD_PTE10__LCD10			0x1CC 0x000 ALT4 0x0
-#define VF610_PAD_PTE10__DEBUG_OUT39		0x1CC 0x000 ALT7 0x0
-#define VF610_PAD_PTE11__GPIO_116		0x1D0 0x000 ALT0 0x0
-#define VF610_PAD_PTE11__DCU0_R6		0x1D0 0x000 ALT1 0x0
-#define VF610_PAD_PTE11__SRC_RCON4		0x1D0 0x000 ALT3 0x0
-#define VF610_PAD_PTE11__LCD11			0x1D0 0x000 ALT4 0x0
-#define VF610_PAD_PTE11__DEBUG_OUT40		0x1D0 0x000 ALT7 0x0
-#define VF610_PAD_PTE12__GPIO_117		0x1D4 0x000 ALT0 0x0
-#define VF610_PAD_PTE12__DCU0_R7		0x1D4 0x000 ALT1 0x0
-#define VF610_PAD_PTE12__DSPI1_CS3		0x1D4 0x000 ALT2 0x0
-#define VF610_PAD_PTE12__SRC_RCON5		0x1D4 0x000 ALT3 0x0
-#define VF610_PAD_PTE12__LCD12			0x1D4 0x000 ALT4 0x0
-#define VF610_PAD_PTE12__LPT_ALT0		0x1D4 0x000 ALT7 0x0
-#define VF610_PAD_PTE13__GPIO_118		0x1D8 0x000 ALT0 0x0
-#define VF610_PAD_PTE13__DCU0_G0		0x1D8 0x000 ALT1 0x0
-#define VF610_PAD_PTE13__LCD13			0x1D8 0x000 ALT4 0x0
-#define VF610_PAD_PTE13__DEBUG_OUT41		0x1D8 0x000 ALT7 0x0
-#define VF610_PAD_PTE14__GPIO_119		0x1DC 0x000 ALT0 0x0
-#define VF610_PAD_PTE14__DCU0_G1		0x1DC 0x000 ALT1 0x0
-#define VF610_PAD_PTE14__LCD14			0x1DC 0x000 ALT4 0x0
-#define VF610_PAD_PTE14__DEBUG_OUT42		0x1DC 0x000 ALT7 0x0
-#define VF610_PAD_PTE15__GPIO_120		0x1E0 0x000 ALT0 0x0
-#define VF610_PAD_PTE15__DCU0_G2		0x1E0 0x000 ALT1 0x0
-#define VF610_PAD_PTE15__SRC_RCON6		0x1E0 0x000 ALT3 0x0
-#define VF610_PAD_PTE15__LCD15			0x1E0 0x000 ALT4 0x0
-#define VF610_PAD_PTE15__DEBUG_OUT43		0x1E0 0x000 ALT7 0x0
-#define VF610_PAD_PTE16__GPIO_121		0x1E4 0x000 ALT0 0x0
-#define VF610_PAD_PTE16__DCU0_G3		0x1E4 0x000 ALT1 0x0
-#define VF610_PAD_PTE16__SRC_RCON7		0x1E4 0x000 ALT3 0x0
-#define VF610_PAD_PTE16__LCD16			0x1E4 0x000 ALT4 0x0
-#define VF610_PAD_PTE17__GPIO_122		0x1E8 0x000 ALT0 0x0
-#define VF610_PAD_PTE17__DCU0_G4		0x1E8 0x000 ALT1 0x0
-#define VF610_PAD_PTE17__SRC_RCON8		0x1E8 0x000 ALT3 0x0
-#define VF610_PAD_PTE17__LCD17			0x1E8 0x000 ALT4 0x0
-#define VF610_PAD_PTE18__GPIO_123		0x1EC 0x000 ALT0 0x0
-#define VF610_PAD_PTE18__DCU0_G5		0x1EC 0x000 ALT1 0x0
-#define VF610_PAD_PTE18__SRC_RCON9		0x1EC 0x000 ALT3 0x0
-#define VF610_PAD_PTE18__LCD18			0x1EC 0x000 ALT4 0x0
-#define VF610_PAD_PTE19__GPIO_124		0x1F0 0x000 ALT0 0x0
-#define VF610_PAD_PTE19__DCU0_G6		0x1F0 0x000 ALT1 0x0
-#define VF610_PAD_PTE19__SRC_RCON10		0x1F0 0x000 ALT3 0x0
-#define VF610_PAD_PTE19__LCD19			0x1F0 0x000 ALT4 0x0
-#define VF610_PAD_PTE19__I2C0_SCL		0x1F0 0x33C ALT5 0x3
-#define VF610_PAD_PTE20__GPIO_125		0x1F4 0x000 ALT0 0x0
-#define VF610_PAD_PTE20__DCU0_G7		0x1F4 0x000 ALT1 0x0
-#define VF610_PAD_PTE20__SRC_RCON11		0x1F4 0x000 ALT3 0x0
-#define VF610_PAD_PTE20__LCD20			0x1F4 0x000 ALT4 0x0
-#define VF610_PAD_PTE20__I2C0_SDA		0x1F4 0x340 ALT5 0x3
-#define VF610_PAD_PTE20__EWM_IN			0x1F4 0x000 ALT7 0x0
-#define VF610_PAD_PTE21__GPIO_126		0x1F8 0x000 ALT0 0x0
-#define VF610_PAD_PTE21__DCU0_B0		0x1F8 0x000 ALT1 0x0
-#define VF610_PAD_PTE21__LCD21			0x1F8 0x000 ALT4 0x0
-#define VF610_PAD_PTE22__GPIO_127		0x1FC 0x000 ALT0 0x0
-#define VF610_PAD_PTE22__DCU0_B1		0x1FC 0x000 ALT1 0x0
-#define VF610_PAD_PTE22__LCD22			0x1FC 0x000 ALT4 0x0
-#define VF610_PAD_PTE23__GPIO_128		0x200 0x000 ALT0 0x0
-#define VF610_PAD_PTE23__DCU0_B2		0x200 0x000 ALT1 0x0
-#define VF610_PAD_PTE23__SRC_RCON12		0x200 0x000 ALT3 0x0
-#define VF610_PAD_PTE23__LCD23			0x200 0x000 ALT4 0x0
-#define VF610_PAD_PTE24__GPIO_129		0x204 0x000 ALT0 0x0
-#define VF610_PAD_PTE24__DCU0_B3		0x204 0x000 ALT1 0x0
-#define VF610_PAD_PTE24__SRC_RCON13		0x204 0x000 ALT3 0x0
-#define VF610_PAD_PTE24__LCD24			0x204 0x000 ALT4 0x0
-#define VF610_PAD_PTE25__GPIO_130		0x208 0x000 ALT0 0x0
-#define VF610_PAD_PTE25__DCU0_B4		0x208 0x000 ALT1 0x0
-#define VF610_PAD_PTE25__SRC_RCON14		0x208 0x000 ALT3 0x0
-#define VF610_PAD_PTE25__LCD25			0x208 0x000 ALT4 0x0
-#define VF610_PAD_PTE26__GPIO_131		0x20C 0x000 ALT0 0x0
-#define VF610_PAD_PTE26__DCU0_B5		0x20C 0x000 ALT1 0x0
-#define VF610_PAD_PTE26__SRC_RCON15		0x20C 0x000 ALT3 0x0
-#define VF610_PAD_PTE26__LCD26			0x20C 0x000 ALT4 0x0
-#define VF610_PAD_PTE27__GPIO_132		0x210 0x000 ALT0 0x0
-#define VF610_PAD_PTE27__DCU0_B6		0x210 0x000 ALT1 0x0
-#define VF610_PAD_PTE27__SRC_RCON16		0x210 0x000 ALT3 0x0
-#define VF610_PAD_PTE27__LCD27			0x210 0x000 ALT4 0x0
-#define VF610_PAD_PTE27__I2C1_SCL		0x210 0x344 ALT5 0x3
-#define VF610_PAD_PTE28__GPIO_133		0x214 0x000 ALT0 0x0
-#define VF610_PAD_PTE28__DCU0_B7		0x214 0x000 ALT1 0x0
-#define VF610_PAD_PTE28__SRC_RCON17		0x214 0x000 ALT3 0x0
-#define VF610_PAD_PTE28__LCD28			0x214 0x000 ALT4 0x0
-#define VF610_PAD_PTE28__I2C1_SDA		0x214 0x348 ALT5 0x3
-#define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
-#define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
-#define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
-
-#endif
diff --git a/src/arm/vf610-twr.dts b/src/arm/vf610-twr.dts
deleted file mode 100644
index b8a5e8c68f06..000000000000
--- a/src/arm/vf610-twr.dts
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/dts-v1/;
-#include "vf610.dtsi"
-
-/ {
-	model = "VF610 Tower Board";
-	compatible = "fsl,vf610-twr", "fsl,vf610";
-
-	chosen {
-		bootargs = "console=ttyLP1,115200";
-	};
-
-	memory {
-		reg = <0x80000000 0x8000000>;
-	};
-
-	clocks {
-		audio_ext {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24576000>;
-		};
-
-		enet_ext {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <50000000>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vcc_3v3_mcu: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vcc_3v3_mcu";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "Speaker Ext",
-			"Line", "Line In Jack";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"Microphone Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Speaker Ext", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-			master-clkdir-out;
-			frame-master;
-			bitclock-master;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			frame-master;
-			bitclock-master;
-		};
-	};
-};
-
-&adc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_ad5>;
-	vref-supply = <&reg_vcc_3v3_mcu>;
-	status = "okay";
-};
-
-&dspi0 {
-	bus-num = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_dspi0>;
-	status = "okay";
-
-	sflash: at26df081a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at26df081a";
-		spi-max-frequency = <16000000>;
-		spi-cpol;
-		spi-cpha;
-		reg = <0>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&fec0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec0>;
-	status = "okay";
-};
-
-&fec1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	status = "okay";
-
-	codec: sgtl5000@0a {
-	       #sound-dai-cells = <0>;
-	       compatible = "fsl,sgtl5000";
-	       reg = <0x0a>;
-	       VDDA-supply = <&reg_3p3v>;
-	       VDDIO-supply = <&reg_3p3v>;
-	       clocks = <&clks VF610_CLK_SAI2>;
-       };
-};
-
-&iomuxc {
-	vf610-twr {
-		pinctrl_adc0_ad5: adc0ad5grp {
-			fsl,pins = <
-				VF610_PAD_PTC30__ADC0_SE5		0xa1
-			>;
-		};
-
-		pinctrl_dspi0: dspi0grp {
-			fsl,pins = <
-				VF610_PAD_PTB19__DSPI0_CS0		0x1182
-				VF610_PAD_PTB20__DSPI0_SIN		0x1181
-				VF610_PAD_PTB21__DSPI0_SOUT		0x1182
-				VF610_PAD_PTB22__DSPI0_SCK		0x1182
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-				VF610_PAD_PTA7__GPIO_134	0x219d
-			>;
-		};
-
-		pinctrl_fec0: fec0grp {
-			fsl,pins = <
-				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
-				VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
-				VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
-				VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
-				VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
-				VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
-				VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
-				VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
-				VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
-				VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
-			>;
-		};
-
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
-				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-			>;
-		};
-
-		pinctrl_i2c0: i2c0grp {
-			fsl,pins = <
-				VF610_PAD_PTB14__I2C0_SCL		0x30d3
-				VF610_PAD_PTB15__I2C0_SDA		0x30d3
-			>;
-		};
-
-		pinctrl_pwm0: pwm0grp {
-			fsl,pins = <
-				VF610_PAD_PTB0__FTM0_CH0		0x1582
-				VF610_PAD_PTB1__FTM0_CH1		0x1582
-				VF610_PAD_PTB2__FTM0_CH2		0x1582
-				VF610_PAD_PTB3__FTM0_CH3		0x1582
-				VF610_PAD_PTB6__FTM0_CH6		0x1582
-				VF610_PAD_PTB7__FTM0_CH7		0x1582
-			>;
-		};
-
-		pinctrl_sai2: sai2grp {
-			fsl,pins = <
-				VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
-				VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
-				VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
-				VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
-				VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
-				VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
-				VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				VF610_PAD_PTB4__UART1_TX		0x21a2
-				VF610_PAD_PTB5__UART1_RX		0x21a1
-			>;
-		};
-	};
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0>;
-	status = "okay";
-};
-
-&sai2 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
diff --git a/src/arm/vt8500-bv07.dts b/src/arm/vt8500-bv07.dts
deleted file mode 100644
index 87f33310e2bc..000000000000
--- a/src/arm/vt8500-bv07.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-/include/ "vt8500.dtsi"
-
-/ {
-	model = "Benign BV07 Netbook";
-};
-
-&fb {
-	bits-per-pixel = <16>;
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 800x480 {
-			clock-frequency = <0>; /* unused but required */
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <88>;
-			hsync-len = <0>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <1>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/vt8500.dtsi b/src/arm/vt8500.dtsi
deleted file mode 100644
index 1929ad390d88..000000000000
--- a/src/arm/vt8500.dtsi
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * vt8500.dtsi - Device tree file for VIA VT8500 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "via,vt8500";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-		};
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc>;
-
-		intc: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "via,vt8500-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				clkuart0: uart0 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <1>;
-				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <2>;
-				};
-
-				clkuart2: uart2 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <3>;
-				};
-
-				clkuart3: uart3 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <4>;
-				};
-			};
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007900 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007900 0x200>;
-			interrupts = <43>;
-		};
-
-		uhci@d8007b00 {
-			compatible = "platform-uhci";
-			reg = <0xd8007b00 0x200>;
-			interrupts = <43>;
-		};
-
-		fb: fb@d8050800 {
-			compatible = "via,vt8500-fb";
-			reg = <0xd800e400 0x400>;
-			interrupts = <12>;
-		};
-
-		ge_rops@d8050400 {
-			compatible = "wm,prizm-ge-rops";
-			reg = <0xd8050400 0x100>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-		uart2: serial@d8210000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8210000 0x1040>;
-			interrupts = <47>;
-			clocks = <&clkuart2>;
-			status = "disabled";
-		};
-
-		uart3: serial@d82c0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82c0000 0x1040>;
-			interrupts = <50>;
-			clocks = <&clkuart3>;
-			status = "disabled";
-		};
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		ethernet@d8004000 {
-			compatible = "via,vt8500-rhine";
-			reg = <0xd8004000 0x100>;
-			interrupts = <10>;
-		};
-	};
-};
diff --git a/src/arm/wm8505-ref.dts b/src/arm/wm8505-ref.dts
deleted file mode 100644
index e3e6b9eb09d0..000000000000
--- a/src/arm/wm8505-ref.dts
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-/include/ "wm8505.dtsi"
-
-/ {
-	model = "Wondermedia WM8505 Netbook";
-};
-
-&fb {
-	bits-per-pixel = <32>;
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 800x480 {
-			clock-frequency = <0>; /* unused but required */
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <88>;
-			hsync-len = <0>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <1>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/wm8505.dtsi b/src/arm/wm8505.dtsi
deleted file mode 100644
index a1a854b8a454..000000000000
--- a/src/arm/wm8505.dtsi
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "wm,wm8505";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-		};
-	};
-
- 	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
- 	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc0>;
-
-		intc0: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		/* Secondary IC cascaded to intc0 */
-		intc1: interrupt-controller@d8150000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xD8150000 0x10000>;
-			interrupts = <56 57 58 59 60 61 62 63>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "wm,wm8505-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				ref25: ref25M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <25000000>;
-				};
-
-				plla: plla {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x200>;
-				};
-
-				pllb: pllb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x204>;
-				};
-
-				pllc: pllc {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x208>;
-				};
-
-				plld: plld {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x20c>;
-				};
-
-				clkarm: arm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plla>;
-					divisor-reg = <0x300>;
-				};
-
-				clkahb: ahb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x304>;
-				};
-
-				clkapb: apb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x350>;
-				};
-
-				clkddr: ddr {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plld>;
-					divisor-reg = <0x310>;
-				};
-
-				clkuart0: uart0 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <1>;
-				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <2>;
-				};
-
-				clkuart2: uart2 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <3>;
-				};
-
-				clkuart3: uart3 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <4>;
-				};
-
-				clkuart4: uart4 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <22>;
-				};
-
-				clkuart5: uart5 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <23>;
-				};
-
-				clksdhc: sdhc {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x328>;
-					divisor-mask = <0x3f>;
-					enable-reg = <0x254>;
-					enable-bit = <18>;
-				};
-			};
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007100 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007100 0x200>;
-			interrupts = <1>;
-		};
-
-		uhci@d8007300 {
-			compatible = "platform-uhci";
-			reg = <0xd8007300 0x200>;
-			interrupts = <0>;
-		};
-
-		fb: fb@d8050800 {
-			compatible = "wm,wm8505-fb";
-			reg = <0xd8050800 0x200>;
-		};
-
-		ge_rops@d8050400 {
-			compatible = "wm,prizm-ge-rops";
-			reg = <0xd8050400 0x100>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-		uart2: serial@d8210000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8210000 0x1040>;
-			interrupts = <47>;
-			clocks = <&clkuart2>;
-			status = "disabled";
-		};
-
-		uart3: serial@d82c0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82c0000 0x1040>;
-			interrupts = <50>;
-			clocks = <&clkuart3>;
-			status = "disabled";
-		};
-
-		uart4: serial@d8370000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8370000 0x1040>;
-			interrupts = <31>;
-			clocks = <&clkuart4>;
-			status = "disabled";
-		};
-
-		uart5: serial@d8380000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8380000 0x1040>;
-			interrupts = <30>;
-			clocks = <&clkuart5>;
-			status = "disabled";
-		};
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		sdhc@d800a000 {
-			compatible = "wm,wm8505-sdhc";
-			reg = <0xd800a000 0x1000>;
-			interrupts = <20 21>;
-			clocks = <&clksdhc>;
-			bus-width = <4>;
-		};
-	};
-};
diff --git a/src/arm/wm8650-mid.dts b/src/arm/wm8650-mid.dts
deleted file mode 100644
index dd0d1b602388..000000000000
--- a/src/arm/wm8650-mid.dts
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-/include/ "wm8650.dtsi"
-
-/ {
-	model = "Wondermedia WM8650-MID Tablet";
-};
-
-&fb {
-	bits-per-pixel = <16>;
-
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 800x480 {
-			clock-frequency = <0>; /* unused but required */
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <88>;
-			hsync-len = <0>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <1>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/wm8650.dtsi b/src/arm/wm8650.dtsi
deleted file mode 100644
index b1c59a766a13..000000000000
--- a/src/arm/wm8650.dtsi
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "wm,wm8650";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-		};
-	};
-
- 	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc0>;
-
-		intc0: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		/* Secondary IC cascaded to intc0 */
-		intc1: interrupt-controller@d8150000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xD8150000 0x10000>;
-			interrupts = <56 57 58 59 60 61 62 63>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "wm,wm8650-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref25: ref25M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <25000000>;
-				};
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				plla: plla {
-					#clock-cells = <0>;
-					compatible = "wm,wm8650-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x200>;
-				};
-
-				pllb: pllb {
-					#clock-cells = <0>;
-					compatible = "wm,wm8650-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x204>;
-				};
-
-				pllc: pllc {
-					#clock-cells = <0>;
-					compatible = "wm,wm8650-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x208>;
-				};
-
-				plld: plld {
-					#clock-cells = <0>;
-					compatible = "wm,wm8650-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x20c>;
-				};
-
-				plle: plle {
-					#clock-cells = <0>;
-					compatible = "wm,wm8650-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x210>;
-				};
-
-				clkarm: arm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plla>;
-					divisor-reg = <0x300>;
-				};
-
-				clkahb: ahb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x304>;
-				};
-
-				clkapb: apb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x320>;
-				};
-
-				clkddr: ddr {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plld>;
-					divisor-reg = <0x310>;
-				};
-
-				clkuart0: uart0 {
- 					#clock-cells = <0>;
- 					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <1>;
- 				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x250>;
-					enable-bit = <2>;
-				};
-
-				clksdhc: sdhc {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x328>;
-					divisor-mask = <0x3f>;
-					enable-reg = <0x254>;
-					enable-bit = <18>;
-				};
-			};
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007900 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007900 0x200>;
-			interrupts = <43>;
-		};
-
-		uhci@d8007b00 {
-			compatible = "platform-uhci";
-			reg = <0xd8007b00 0x200>;
-			interrupts = <43>;
-		};
-
-		fb: fb@d8050800 {
-			compatible = "wm,wm8505-fb";
-			reg = <0xd8050800 0x200>;
-		};
-
-		ge_rops@d8050400 {
-			compatible = "wm,prizm-ge-rops";
-			reg = <0xd8050400 0x100>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		ethernet@d8004000 {
-			compatible = "via,vt8500-rhine";
-			reg = <0xd8004000 0x100>;
-			interrupts = <10>;
-		};
-	};
-};
diff --git a/src/arm/wm8750-apc8750.dts b/src/arm/wm8750-apc8750.dts
deleted file mode 100644
index 37e4a408bf39..000000000000
--- a/src/arm/wm8750-apc8750.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * wm8750-apc8750.dts
- *  - Device tree file for VIA APC8750
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-/include/ "wm8750.dtsi"
-
-/ {
-	model = "VIA APC8750";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c>;
-
-	i2c: i2c {
-		wm,pins = <168 169 170 171>;
-		wm,function = <2>;	/* alt */
-		wm,pull = <2>;	/* pull-up */
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/wm8750.dtsi b/src/arm/wm8750.dtsi
deleted file mode 100644
index 557a9c2ace49..000000000000
--- a/src/arm/wm8750.dtsi
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "wm,wm8750";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm1176ej-s";
-		};
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc0>;
-
-		intc0: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		/* Secondary IC cascaded to intc0 */
-		intc1: interrupt-controller@d8150000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xD8150000 0x10000>;
-			interrupts = <56 57 58 59 60 61 62 63>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "wm,wm8750-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				ref25: ref25M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <25000000>;
-				};
-
-				plla: plla {
-					#clock-cells = <0>;
-					compatible = "wm,wm8750-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x200>;
-				};
-
-				pllb: pllb {
-					#clock-cells = <0>;
-					compatible = "wm,wm8750-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x204>;
-				};
-
-				pllc: pllc {
-					#clock-cells = <0>;
-					compatible = "wm,wm8750-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x208>;
-				};
-
-				plld: plld {
-					#clock-cells = <0>;
-					compatible = "wm,wm8750-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x20C>;
-				};
-
-				plle: plle {
-					#clock-cells = <0>;
-					compatible = "wm,wm8750-pll-clock";
-					clocks = <&ref25>;
-					reg = <0x210>;
-				};
-
-				clkarm: arm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plla>;
-					divisor-reg = <0x300>;
-				};
-
-				clkahb: ahb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x304>;
-				};
-
-				clkapb: apb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x320>;
-				};
-
-				clkddr: ddr {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plld>;
-					divisor-reg = <0x310>;
-				};
-
-				clkuart0: uart0 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x254>;
-					enable-bit = <24>;
-				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x254>;
-					enable-bit = <25>;
-				};
-
-                                clkuart2: uart2 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <26>;
-                                };
-
-                                clkuart3: uart3 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <27>;
-                                };
-
-                                clkuart4: uart4 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <28>;
-                                };
-
-                                clkuart5: uart5 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <29>;
-                                };
-
-				clkpwm: pwm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x350>;
-					enable-reg = <0x250>;
-					enable-bit = <17>;
-				};
-
-				clksdhc: sdhc {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x330>;
-					divisor-mask = <0x3f>;
-					enable-reg = <0x250>;
-					enable-bit = <0>;
-				};
-
-				clki2c0: i2c0clk {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x3A0>;
-					enable-reg = <0x250>;
-					enable-bit = <8>;
-				};
-
-				clki2c1: i2c1clk {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x3A4>;
-					enable-reg = <0x250>;
-					enable-bit = <9>;
-				};
-			};
-		};
-
-		pwm: pwm@d8220000 {
-			#pwm-cells = <3>;
-			compatible = "via,vt8500-pwm";
-			reg = <0xd8220000 0x100>;
-			clocks = <&clkpwm>;
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007900 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007900 0x200>;
-			interrupts = <26>;
-		};
-
-		uhci@d8007b00 {
-			compatible = "platform-uhci";
-			reg = <0xd8007b00 0x200>;
-			interrupts = <26>;
-		};
-
-		uhci@d8008d00 {
-			compatible = "platform-uhci";
-			reg = <0xd8008d00 0x200>;
-			interrupts = <26>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-                uart2: serial@d8210000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd8210000 0x1040>;
-                        interrupts = <47>;
-                        clocks = <&clkuart2>;
-			status = "disabled";
-                };
-
-                uart3: serial@d82c0000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd82c0000 0x1040>;
-                        interrupts = <50>;
-                        clocks = <&clkuart3>;
-			status = "disabled";
-                };
-
-                uart4: serial@d8370000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd8370000 0x1040>;
-                        interrupts = <30>;
-                        clocks = <&clkuart4>;
-			status = "disabled";
-                };
-
-                uart5: serial@d8380000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd8380000 0x1040>;
-                        interrupts = <43>;
-                        clocks = <&clkuart5>;
-			status = "disabled";
-                };
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		sdhc@d800a000 {
-			compatible = "wm,wm8505-sdhc";
-			reg = <0xd800a000 0x1000>;
-			interrupts = <20 21>;
-			clocks = <&clksdhc>;
-			bus-width = <4>;
-			sdon-inverted;
-		};
-
-		i2c_0: i2c@d8280000 {
-			compatible = "wm,wm8505-i2c";
-			reg = <0xd8280000 0x1000>;
-			interrupts = <19>;
-			clocks = <&clki2c0>;
-			clock-frequency = <400000>;
-		};
-
-		i2c_1: i2c@d8320000 {
-			compatible = "wm,wm8505-i2c";
-			reg = <0xd8320000 0x1000>;
-			interrupts = <18>;
-			clocks = <&clki2c1>;
-			clock-frequency = <400000>;
-		};
-	};
-};
diff --git a/src/arm/wm8850-w70v2.dts b/src/arm/wm8850-w70v2.dts
deleted file mode 100644
index 7a563d2523b0..000000000000
--- a/src/arm/wm8850-w70v2.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * wm8850-w70v2.dts
- *  - Device tree file for Wondermedia WM8850 Tablet
- *  - 'W70-V2' mainboard
- *  - HongLianYing 'HLY070ML268-21A' 7" LCD panel
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/dts-v1/;
-/include/ "wm8850.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Wondermedia WM8850-W70v2 Tablet";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-
-		brightness-levels = <0 40 60 80 100 130 190 255>;
-		default-brightness-level = <5>;
-	};
-};
-
-&fb {
-	bits-per-pixel = <16>;
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: 800x480 {
-			clock-frequency = <0>; /* unused but required */
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <40>;
-			hback-porch = <88>;
-			hsync-len = <0>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <1>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
diff --git a/src/arm/wm8850.dtsi b/src/arm/wm8850.dtsi
deleted file mode 100644
index 8fbccfbe75f3..000000000000
--- a/src/arm/wm8850.dtsi
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * wm8850.dtsi - Device tree file for Wondermedia WM8850 SoC
- *
- * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
- *
- * Licensed under GPLv2 or later
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "wm,wm8850";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x0>;
-		};
-	};
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc0>;
-
-		intc0: interrupt-controller@d8140000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			reg = <0xd8140000 0x10000>;
-			#interrupt-cells = <1>;
-		};
-
-		/* Secondary IC cascaded to intc0 */
-		intc1: interrupt-controller@d8150000 {
-			compatible = "via,vt8500-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0xD8150000 0x10000>;
-			interrupts = <56 57 58 59 60 61 62 63>;
-		};
-
-		pinctrl: pinctrl@d8110000 {
-			compatible = "wm,wm8850-pinctrl";
-			reg = <0xd8110000 0x10000>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pmc@d8130000 {
-			compatible = "via,vt8500-pmc";
-			reg = <0xd8130000 0x1000>;
-
-			clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ref25: ref25M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <25000000>;
-				};
-
-				ref24: ref24M {
-					#clock-cells = <0>;
-					compatible = "fixed-clock";
-					clock-frequency = <24000000>;
-				};
-
-				plla: plla {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x200>;
-				};
-
-				pllb: pllb {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x204>;
-				};
-
-				pllc: pllc {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x208>;
-				};
-
-				plld: plld {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x20c>;
-				};
-
-				plle: plle {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x210>;
-				};
-
-				pllf: pllf {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x214>;
-				};
-
-				pllg: pllg {
-					#clock-cells = <0>;
-					compatible = "wm,wm8850-pll-clock";
-					clocks = <&ref24>;
-					reg = <0x218>;
-				};
-
-				clkarm: arm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plla>;
-					divisor-reg = <0x300>;
-				};
-
-				clkahb: ahb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x304>;
-				};
-
-				clkapb: apb {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x320>;
-				};
-
-				clkddr: ddr {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&plld>;
-					divisor-reg = <0x310>;
-				};
-
-				clkuart0: uart0 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x254>;
-					enable-bit = <24>;
-				};
-
-				clkuart1: uart1 {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&ref24>;
-					enable-reg = <0x254>;
-					enable-bit = <25>;
-				};
-
-                                clkuart2: uart2 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <26>;
-                                };
-
-                                clkuart3: uart3 {
-                                        #clock-cells = <0>;
-                                        compatible = "via,vt8500-device-clock";
-                                        clocks = <&ref24>;
-                                        enable-reg = <0x254>;
-                                        enable-bit = <27>;
-                                };
-
-				clkpwm: pwm {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x350>;
-					enable-reg = <0x250>;
-					enable-bit = <17>;
-				};
-
-				clksdhc: sdhc {
-					#clock-cells = <0>;
-					compatible = "via,vt8500-device-clock";
-					clocks = <&pllb>;
-					divisor-reg = <0x330>;
-					divisor-mask = <0x3f>;
-					enable-reg = <0x250>;
-					enable-bit = <0>;
-				};
-			};
-		};
-
-		fb: fb@d8051700 {
-			compatible = "wm,wm8505-fb";
-			reg = <0xd8051700 0x200>;
-		};
-
-		ge_rops@d8050400 {
-			compatible = "wm,prizm-ge-rops";
-			reg = <0xd8050400 0x100>;
-		};
-
-		pwm: pwm@d8220000 {
-			#pwm-cells = <3>;
-			compatible = "via,vt8500-pwm";
-			reg = <0xd8220000 0x100>;
-			clocks = <&clkpwm>;
-		};
-
-		timer@d8130100 {
-			compatible = "via,vt8500-timer";
-			reg = <0xd8130100 0x28>;
-			interrupts = <36>;
-		};
-
-		ehci@d8007900 {
-			compatible = "via,vt8500-ehci";
-			reg = <0xd8007900 0x200>;
-			interrupts = <26>;
-		};
-
-		uhci@d8007b00 {
-			compatible = "platform-uhci";
-			reg = <0xd8007b00 0x200>;
-			interrupts = <26>;
-		};
-
-		uhci@d8008d00 {
-			compatible = "platform-uhci";
-			reg = <0xd8008d00 0x200>;
-			interrupts = <26>;
-		};
-
-		uart0: serial@d8200000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd8200000 0x1040>;
-			interrupts = <32>;
-			clocks = <&clkuart0>;
-			status = "disabled";
-		};
-
-		uart1: serial@d82b0000 {
-			compatible = "via,vt8500-uart";
-			reg = <0xd82b0000 0x1040>;
-			interrupts = <33>;
-			clocks = <&clkuart1>;
-			status = "disabled";
-		};
-
-                uart2: serial@d8210000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd8210000 0x1040>;
-                        interrupts = <47>;
-                        clocks = <&clkuart2>;
-			status = "disabled";
-                };
-
-                uart3: serial@d82c0000 {
-                        compatible = "via,vt8500-uart";
-                        reg = <0xd82c0000 0x1040>;
-                        interrupts = <50>;
-                        clocks = <&clkuart3>;
-			status = "disabled";
-                };
-
-		rtc@d8100000 {
-			compatible = "via,vt8500-rtc";
-			reg = <0xd8100000 0x10000>;
-			interrupts = <48>;
-		};
-
-		sdhc@d800a000 {
-			compatible = "wm,wm8505-sdhc";
-			reg = <0xd800a000 0x1000>;
-			interrupts = <20 21>;
-			clocks = <&clksdhc>;
-			bus-width = <4>;
-			sdon-inverted;
-		};
-
-		ethernet@d8004000 {
-			compatible = "via,vt8500-rhine";
-			reg = <0xd8004000 0x100>;
-			interrupts = <10>;
-                };
-	};
-};
diff --git a/src/arm/xenvm-4.2.dts b/src/arm/xenvm-4.2.dts
deleted file mode 100644
index 336915151398..000000000000
--- a/src/arm/xenvm-4.2.dts
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Xen Virtual Machine for unprivileged guests
- *
- * Based on ARM Ltd. Versatile Express CoreTile Express (single CPU)
- * Cortex-A15 MPCore (V2P-CA15)
- *
- */
-
-/dts-v1/;
-
-/ {
-	model = "XENVM-4.2";
-	compatible = "xen,xenvm-4.2", "xen,xenvm";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen {
-		/* this field is going to be adjusted by the hypervisor */
-		bootargs = "console=hvc0 root=/dev/xvda";
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-	};
-
-	psci {
-		compatible      = "arm,psci";
-		method          = "hvc";
-		cpu_off         = <1>;
-		cpu_on          = <2>;
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		/* this field is going to be adjusted by the hypervisor */
-		reg = <0 0x80000000 0 0x08000000>;
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x100>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-	};
-
-	hypervisor {
-		compatible = "xen,xen-4.2", "xen,xen";
-		/* this field is going to be adjusted by the hypervisor */
-		reg = <0 0xb0000000 0 0x20000>;
-		/* this field is going to be adjusted by the hypervisor */
-		interrupts = <1 15 0xf08>;
-	};
-
-	motherboard {
-		arm,v2m-memory-map = "rs1";
-	};
-};
diff --git a/src/arm/zynq-7000.dtsi b/src/arm/zynq-7000.dtsi
deleted file mode 100644
index 6cc83d4c6c76..000000000000
--- a/src/arm/zynq-7000.dtsi
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- *  Copyright (C) 2011 - 2014 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/include/ "skeleton.dtsi"
-
-/ {
-	compatible = "xlnx,zynq-7000";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&clkc 3>;
-			clock-latency = <1000>;
-			cpu0-supply = <&regulator_vccpint>;
-			operating-points = <
-				/* kHz    uV */
-				666667  1000000
-				333334  1000000
-				222223  1000000
-			>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&clkc 3>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 5 4>, <0 6 4>;
-		interrupt-parent = <&intc>;
-		reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
-	};
-
-	regulator_vccpint: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCCPINT";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	amba {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
-		ranges;
-
-		adc@f8007100 {
-			compatible = "xlnx,zynq-xadc-1.00.a";
-			reg = <0xf8007100 0x20>;
-			interrupts = <0 7 4>;
-			interrupt-parent = <&intc>;
-			clocks = <&clkc 12>;
-		};
-
-		can0: can@e0008000 {
-			compatible = "xlnx,zynq-can-1.0";
-			status = "disabled";
-			clocks = <&clkc 19>, <&clkc 36>;
-			clock-names = "can_clk", "pclk";
-			reg = <0xe0008000 0x1000>;
-			interrupts = <0 28 4>;
-			interrupt-parent = <&intc>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-
-		can1: can@e0009000 {
-			compatible = "xlnx,zynq-can-1.0";
-			status = "disabled";
-			clocks = <&clkc 20>, <&clkc 37>;
-			clock-names = "can_clk", "pclk";
-			reg = <0xe0009000 0x1000>;
-			interrupts = <0 51 4>;
-			interrupt-parent = <&intc>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-
-		gpio0: gpio@e000a000 {
-			compatible = "xlnx,zynq-gpio-1.0";
-			#gpio-cells = <2>;
-			clocks = <&clkc 42>;
-			gpio-controller;
-			interrupt-parent = <&intc>;
-			interrupts = <0 20 4>;
-			reg = <0xe000a000 0x1000>;
-		};
-
-		i2c0: i2c@e0004000 {
-			compatible = "cdns,i2c-r1p10";
-			status = "disabled";
-			clocks = <&clkc 38>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 25 4>;
-			reg = <0xe0004000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@e0005000 {
-			compatible = "cdns,i2c-r1p10";
-			status = "disabled";
-			clocks = <&clkc 39>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 48 4>;
-			reg = <0xe0005000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@f8f01000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0xF8F01000 0x1000>,
-			      <0xF8F00100 0x100>;
-		};
-
-		L2: cache-controller {
-			compatible = "arm,pl310-cache";
-			reg = <0xF8F02000 0x1000>;
-			arm,data-latency = <3 2 2>;
-			arm,tag-latency = <2 2 2>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		uart0: serial@e0000000 {
-			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
-			status = "disabled";
-			clocks = <&clkc 23>, <&clkc 40>;
-			clock-names = "uart_clk", "pclk";
-			reg = <0xE0000000 0x1000>;
-			interrupts = <0 27 4>;
-		};
-
-		uart1: serial@e0001000 {
-			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
-			status = "disabled";
-			clocks = <&clkc 24>, <&clkc 41>;
-			clock-names = "uart_clk", "pclk";
-			reg = <0xE0001000 0x1000>;
-			interrupts = <0 50 4>;
-		};
-
-		spi0: spi@e0006000 {
-			compatible = "xlnx,zynq-spi-r1p6";
-			reg = <0xe0006000 0x1000>;
-			status = "disabled";
-			interrupt-parent = <&intc>;
-			interrupts = <0 26 4>;
-			clocks = <&clkc 25>, <&clkc 34>;
-			clock-names = "ref_clk", "pclk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@e0007000 {
-			compatible = "xlnx,zynq-spi-r1p6";
-			reg = <0xe0007000 0x1000>;
-			status = "disabled";
-			interrupt-parent = <&intc>;
-			interrupts = <0 49 4>;
-			clocks = <&clkc 26>, <&clkc 35>;
-			clock-names = "ref_clk", "pclk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		gem0: ethernet@e000b000 {
-			compatible = "cdns,gem";
-			reg = <0xe000b000 0x4000>;
-			status = "disabled";
-			interrupts = <0 22 4>;
-			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
-			clock-names = "pclk", "hclk", "tx_clk";
-		};
-
-		gem1: ethernet@e000c000 {
-			compatible = "cdns,gem";
-			reg = <0xe000c000 0x4000>;
-			status = "disabled";
-			interrupts = <0 45 4>;
-			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
-			clock-names = "pclk", "hclk", "tx_clk";
-		};
-
-		sdhci0: sdhci@e0100000 {
-			compatible = "arasan,sdhci-8.9a";
-			status = "disabled";
-			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&clkc 21>, <&clkc 32>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 24 4>;
-			reg = <0xe0100000 0x1000>;
-		} ;
-
-		sdhci1: sdhci@e0101000 {
-			compatible = "arasan,sdhci-8.9a";
-			status = "disabled";
-			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&clkc 22>, <&clkc 33>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 47 4>;
-			reg = <0xe0101000 0x1000>;
-		} ;
-
-		slcr: slcr@f8000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon";
-			reg = <0xF8000000 0x1000>;
-			ranges;
-			clkc: clkc@100 {
-				#clock-cells = <1>;
-				compatible = "xlnx,ps7-clkc";
-				ps-clk-frequency = <33333333>;
-				fclk-enable = <0>;
-				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
-						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
-						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
-						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
-						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
-						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
-						"gem1_aper", "sdio0_aper", "sdio1_aper",
-						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
-						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
-						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
-						"dbg_trc", "dbg_apb";
-				reg = <0x100 0x100>;
-			};
-		};
-
-		dmac_s: dmac@f8003000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0xf8003000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 13 4>,
-			             <0 14 4>, <0 15 4>,
-			             <0 16 4>, <0 17 4>,
-			             <0 40 4>, <0 41 4>,
-			             <0 42 4>, <0 43 4>;
-			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <4>;
-			clocks = <&clkc 27>;
-			clock-names = "apb_pclk";
-		};
-
-		devcfg: devcfg@f8007000 {
-			compatible = "xlnx,zynq-devcfg-1.0";
-			reg = <0xf8007000 0x100>;
-		} ;
-
-		global_timer: timer@f8f00200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0xf8f00200 0x20>;
-			interrupts = <1 11 0x301>;
-			interrupt-parent = <&intc>;
-			clocks = <&clkc 4>;
-		};
-
-		ttc0: timer@f8001000 {
-			interrupt-parent = <&intc>;
-			interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
-			compatible = "cdns,ttc";
-			clocks = <&clkc 6>;
-			reg = <0xF8001000 0x1000>;
-		};
-
-		ttc1: timer@f8002000 {
-			interrupt-parent = <&intc>;
-			interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
-			compatible = "cdns,ttc";
-			clocks = <&clkc 6>;
-			reg = <0xF8002000 0x1000>;
-		};
-
-		scutimer: timer@f8f00600 {
-			interrupt-parent = <&intc>;
-			interrupts = <1 13 0x301>;
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0xf8f00600 0x20>;
-			clocks = <&clkc 4>;
-		} ;
-	};
-};
diff --git a/src/arm/zynq-parallella.dts b/src/arm/zynq-parallella.dts
deleted file mode 100644
index 41afd9da6876..000000000000
--- a/src/arm/zynq-parallella.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (c) 2014 SUSE LINUX Products GmbH
- *
- * Derived from zynq-zed.dts:
- *
- *  Copyright (C) 2011 Xilinx
- *  Copyright (C) 2012 National Instruments Corp.
- *  Copyright (C) 2013 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/dts-v1/;
-/include/ "zynq-7000.dtsi"
-
-/ {
-	model = "Adapteva Parallella Board";
-	compatible = "adapteva,parallella", "xlnx,zynq-7000";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
-		linux,stdout-path = "/amba/serial@e0001000";
-	};
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethernet_phy>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	ethernet_phy: ethernet-phy@0 {
-		/* Marvell 88E1318 */
-		compatible = "ethernet-phy-id0141.0e90",
-		             "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-		marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
-		                   <0x3 0x11 0xfff0 0xa>;
-	};
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&sdhci1 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/src/arm/zynq-zc702.dts b/src/arm/zynq-zc702.dts
deleted file mode 100644
index 835c3089c61c..000000000000
--- a/src/arm/zynq-zc702.dts
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- *  Copyright (C) 2011 Xilinx
- *  Copyright (C) 2012 National Instruments Corp.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/dts-v1/;
-/include/ "zynq-7000.dtsi"
-
-/ {
-	model = "Zynq ZC702 Development Board";
-	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk";
-	};
-
-};
-
-&can0 {
-	status = "okay";
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	i2cswitch@74 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x74>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			si570: clock-generator@5d {
-				#clock-cells = <0>;
-				compatible = "silabs,si570";
-				temperature-stability = <50>;
-				reg = <0x5d>;
-				factory-fout = <156250000>;
-				clock-frequency = <148500000>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@54 {
-				compatible = "at,24c08";
-				reg = <0x54>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			gpio@21 {
-				compatible = "ti,tca6416";
-				reg = <0x21>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-			hwmon@52 {
-				compatible = "ti,ucd9248";
-				reg = <52>;
-			};
-			hwmon@53 {
-				compatible = "ti,ucd9248";
-				reg = <53>;
-			};
-			hwmon@54 {
-				compatible = "ti,ucd9248";
-				reg = <54>;
-			};
-		};
-	};
-};
-
-&sdhci0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/src/arm/zynq-zc706.dts b/src/arm/zynq-zc706.dts
deleted file mode 100644
index 4cc9913078cd..000000000000
--- a/src/arm/zynq-zc706.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- *  Copyright (C) 2011 Xilinx
- *  Copyright (C) 2012 National Instruments Corp.
- *  Copyright (C) 2013 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/dts-v1/;
-/include/ "zynq-7000.dtsi"
-
-/ {
-	model = "Zynq ZC706 Development Board";
-	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk";
-	};
-
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	i2cswitch@74 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x74>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-			si570: clock-generator@5d {
-				#clock-cells = <0>;
-				compatible = "silabs,si570";
-				temperature-stability = <50>;
-				reg = <0x5d>;
-				factory-fout = <156250000>;
-				clock-frequency = <148500000>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-			eeprom@54 {
-				compatible = "at,24c08";
-				reg = <0x54>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-			gpio@21 {
-				compatible = "ti,tca6416";
-				reg = <0x21>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-			ucd90120@65 {
-				compatible = "ti,ucd90120";
-				reg = <0x65>;
-			};
-		};
-	};
-};
-
-&sdhci0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/src/arm/zynq-zed.dts b/src/arm/zynq-zed.dts
deleted file mode 100644
index 82d7ef1a9a9c..000000000000
--- a/src/arm/zynq-zed.dts
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  Copyright (C) 2011 Xilinx
- *  Copyright (C) 2012 National Instruments Corp.
- *  Copyright (C) 2013 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-/dts-v1/;
-/include/ "zynq-7000.dtsi"
-
-/ {
-	model = "Zynq Zed Development Board";
-	compatible = "xlnx,zynq-7000";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk";
-	};
-
-};
-
-&gem0 {
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&sdhci0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
diff --git a/src/arm64/apm-mustang.dts b/src/arm64/apm-mustang.dts
deleted file mode 100644
index b2f56229aa5e..000000000000
--- a/src/arm64/apm-mustang.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * dts file for AppliedMicro (APM) Mustang Board
- *
- * Copyright (C) 2013, Applied Micro Circuits Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-/include/ "apm-storm.dtsi"
-
-/ {
-	model = "APM X-Gene Mustang board";
-	compatible = "apm,mustang", "apm,xgene-storm";
-
-	chosen { };
-
-	memory {
-		device_type = "memory";
-		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
-	};
-};
-
-&serial0 {
-	status = "ok";
-};
-
-&menet {
-	status = "ok";
-};
diff --git a/src/arm64/apm-storm.dtsi b/src/arm64/apm-storm.dtsi
deleted file mode 100644
index c0aceef7f5b3..000000000000
--- a/src/arm64/apm-storm.dtsi
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * dts file for AppliedMicro (APM) X-Gene Storm SOC
- *
- * Copyright (C) 2013, Applied Micro Circuits Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/ {
-	compatible = "apm,xgene-storm";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu@000 {
-			device_type = "cpu";
-			compatible = "apm,potenza", "arm,armv8";
-			reg = <0x0 0x000>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x1 0x0000fff8>;
-		};
-		cpu@001 {
-			device_type = "cpu";
-			compatible = "apm,potenza", "arm,armv8";
-			reg = <0x0 0x001>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x1 0x0000fff8>;
-		};
-		cpu@100 {
-			device_type = "cpu";
-			compatible = "apm,potenza", "arm,armv8";
-			reg = <0x0 0x100>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x1 0x0000fff8>;
-		};
-		cpu@101 {
-			device_type = "cpu";
-			compatible = "apm,potenza", "arm,armv8";
-			reg = <0x0 0x101>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x1 0x0000fff8>;
-		};
-		cpu@200 {
-			device_type = "cpu";
-			compatible = "apm,potenza", "arm,armv8";
-			reg = <0x0 0x200>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x1 0x0000fff8>;
-		};
-		cpu@201 {
-			device_type = "cpu";
-			compatible = "apm,potenza", "arm,armv8";
-			reg = <0x0 0x201>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x1 0x0000fff8>;
-		};
-		cpu@300 {
-			device_type = "cpu";
-			compatible = "apm,potenza", "arm,armv8";
-			reg = <0x0 0x300>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x1 0x0000fff8>;
-		};
-		cpu@301 {
-			device_type = "cpu";
-			compatible = "apm,potenza", "arm,armv8";
-			reg = <0x0 0x301>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x1 0x0000fff8>;
-		};
-	};
-
-	gic: interrupt-controller@78010000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x0 0x78010000 0x0 0x1000>,	/* GIC Dist */
-		      <0x0 0x78020000 0x0 0x1000>,	/* GIC CPU */
-		      <0x0 0x78040000 0x0 0x2000>,	/* GIC VCPU Control */
-		      <0x0 0x78060000 0x0 0x2000>;	/* GIC VCPU */
-		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <1 0 0xff01>,	/* Secure Phys IRQ */
-			     <1 13 0xff01>,	/* Non-secure Phys IRQ */
-			     <1 14 0xff01>,	/* Virt IRQ */
-			     <1 15 0xff01>;	/* Hyp IRQ */
-		clock-frequency = <50000000>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		clocks {
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			refclk: refclk {
-				compatible = "fixed-clock";
-				#clock-cells = <1>;
-				clock-frequency = <100000000>;
-				clock-output-names = "refclk";
-			};
-
-			pcppll: pcppll@17000100 {
-				compatible = "apm,xgene-pcppll-clock";
-				#clock-cells = <1>;
-				clocks = <&refclk 0>;
-				clock-names = "pcppll";
-				reg = <0x0 0x17000100 0x0 0x1000>;
-				clock-output-names = "pcppll";
-				type = <0>;
-			};
-
-			socpll: socpll@17000120 {
-				compatible = "apm,xgene-socpll-clock";
-				#clock-cells = <1>;
-				clocks = <&refclk 0>;
-				clock-names = "socpll";
-				reg = <0x0 0x17000120 0x0 0x1000>;
-				clock-output-names = "socpll";
-				type = <1>;
-			};
-
-			socplldiv2: socplldiv2  {
-				compatible = "fixed-factor-clock";
-				#clock-cells = <1>;
-				clocks = <&socpll 0>;
-				clock-names = "socplldiv2";
-				clock-mult = <1>;
-				clock-div = <2>;
-				clock-output-names = "socplldiv2";
-			};
-
-			qmlclk: qmlclk {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				clock-names = "qmlclk";
-				reg = <0x0 0x1703C000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				clock-output-names = "qmlclk";
-			};
-
-			ethclk: ethclk {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				clock-names = "ethclk";
-				reg = <0x0 0x17000000 0x0 0x1000>;
-				reg-names = "div-reg";
-				divider-offset = <0x238>;
-				divider-width = <0x9>;
-				divider-shift = <0x0>;
-				clock-output-names = "ethclk";
-			};
-
-			menetclk: menetclk {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&ethclk 0>;
-				reg = <0x0 0x1702C000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				clock-output-names = "menetclk";
-			};
-
-			sataphy1clk: sataphy1clk@1f21c000 {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				reg = <0x0 0x1f21c000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				clock-output-names = "sataphy1clk";
-				status = "disabled";
-				csr-offset = <0x4>;
-				csr-mask = <0x00>;
-				enable-offset = <0x0>;
-				enable-mask = <0x06>;
-			};
-
-			sataphy2clk: sataphy1clk@1f22c000 {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				reg = <0x0 0x1f22c000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				clock-output-names = "sataphy2clk";
-				status = "ok";
-				csr-offset = <0x4>;
-				csr-mask = <0x3a>;
-				enable-offset = <0x0>;
-				enable-mask = <0x06>;
-			};
-
-			sataphy3clk: sataphy1clk@1f23c000 {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				reg = <0x0 0x1f23c000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				clock-output-names = "sataphy3clk";
-				status = "ok";
-				csr-offset = <0x4>;
-				csr-mask = <0x3a>;
-				enable-offset = <0x0>;
-				enable-mask = <0x06>;
-			};
-
-			sata01clk: sata01clk@1f21c000 {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				reg = <0x0 0x1f21c000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				clock-output-names = "sata01clk";
-				csr-offset = <0x4>;
-				csr-mask = <0x05>;
-				enable-offset = <0x0>;
-				enable-mask = <0x39>;
-			};
-
-			sata23clk: sata23clk@1f22c000 {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				reg = <0x0 0x1f22c000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				clock-output-names = "sata23clk";
-				csr-offset = <0x4>;
-				csr-mask = <0x05>;
-				enable-offset = <0x0>;
-				enable-mask = <0x39>;
-			};
-
-			sata45clk: sata45clk@1f23c000 {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				reg = <0x0 0x1f23c000 0x0 0x1000>;
-				reg-names = "csr-reg";
-				clock-output-names = "sata45clk";
-				csr-offset = <0x4>;
-				csr-mask = <0x05>;
-				enable-offset = <0x0>;
-				enable-mask = <0x39>;
-			};
-
-			rtcclk: rtcclk@17000000 {
-				compatible = "apm,xgene-device-clock";
-				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
-				reg = <0x0 0x17000000 0x0 0x2000>;
-				reg-names = "csr-reg";
-				csr-offset = <0xc>;
-				csr-mask = <0x2>;
-				enable-offset = <0x10>;
-				enable-mask = <0x2>;
-				clock-output-names = "rtcclk";
-			};
-		};
-
-		serial0: serial@1c020000 {
-			status = "disabled";
-			device_type = "serial";
-			compatible = "ns16550a";
-			reg = <0 0x1c020000 0x0 0x1000>;
-			reg-shift = <2>;
-			clock-frequency = <10000000>; /* Updated by bootloader */
-			interrupt-parent = <&gic>;
-			interrupts = <0x0 0x4c 0x4>;
-		};
-
-		serial1: serial@1c021000 {
-			status = "disabled";
-			device_type = "serial";
-			compatible = "ns16550a";
-			reg = <0 0x1c021000 0x0 0x1000>;
-			reg-shift = <2>;
-			clock-frequency = <10000000>; /* Updated by bootloader */
-			interrupt-parent = <&gic>;
-			interrupts = <0x0 0x4d 0x4>;
-		};
-
-		serial2: serial@1c022000 {
-			status = "disabled";
-			device_type = "serial";
-			compatible = "ns16550a";
-			reg = <0 0x1c022000 0x0 0x1000>;
-			reg-shift = <2>;
-			clock-frequency = <10000000>; /* Updated by bootloader */
-			interrupt-parent = <&gic>;
-			interrupts = <0x0 0x4e 0x4>;
-		};
-
-		serial3: serial@1c023000 {
-			status = "disabled";
-			device_type = "serial";
-			compatible = "ns16550a";
-			reg = <0 0x1c023000 0x0 0x1000>;
-			reg-shift = <2>;
-			clock-frequency = <10000000>; /* Updated by bootloader */
-			interrupt-parent = <&gic>;
-			interrupts = <0x0 0x4f 0x4>;
-		};
-
-		phy1: phy@1f21a000 {
-			compatible = "apm,xgene-phy";
-			reg = <0x0 0x1f21a000 0x0 0x100>;
-			#phy-cells = <1>;
-			clocks = <&sataphy1clk 0>;
-			status = "disabled";
-			apm,tx-boost-gain = <30 30 30 30 30 30>;
-			apm,tx-eye-tuning = <2 10 10 2 10 10>;
-		};
-
-		phy2: phy@1f22a000 {
-			compatible = "apm,xgene-phy";
-			reg = <0x0 0x1f22a000 0x0 0x100>;
-			#phy-cells = <1>;
-			clocks = <&sataphy2clk 0>;
-			status = "ok";
-			apm,tx-boost-gain = <30 30 30 30 30 30>;
-			apm,tx-eye-tuning = <1 10 10 2 10 10>;
-		};
-
-		phy3: phy@1f23a000 {
-			compatible = "apm,xgene-phy";
-			reg = <0x0 0x1f23a000 0x0 0x100>;
-			#phy-cells = <1>;
-			clocks = <&sataphy3clk 0>;
-			status = "ok";
-			apm,tx-boost-gain = <31 31 31 31 31 31>;
-			apm,tx-eye-tuning = <2 10 10 2 10 10>;
-		};
-
-		sata1: sata@1a000000 {
-			compatible = "apm,xgene-ahci";
-			reg = <0x0 0x1a000000 0x0 0x1000>,
-			      <0x0 0x1f210000 0x0 0x1000>,
-			      <0x0 0x1f21d000 0x0 0x1000>,
-			      <0x0 0x1f21e000 0x0 0x1000>,
-			      <0x0 0x1f217000 0x0 0x1000>;
-			interrupts = <0x0 0x86 0x4>;
-			dma-coherent;
-			status = "disabled";
-			clocks = <&sata01clk 0>;
-			phys = <&phy1 0>;
-			phy-names = "sata-phy";
-		};
-
-		sata2: sata@1a400000 {
-			compatible = "apm,xgene-ahci";
-			reg = <0x0 0x1a400000 0x0 0x1000>,
-			      <0x0 0x1f220000 0x0 0x1000>,
-			      <0x0 0x1f22d000 0x0 0x1000>,
-			      <0x0 0x1f22e000 0x0 0x1000>,
-			      <0x0 0x1f227000 0x0 0x1000>;
-			interrupts = <0x0 0x87 0x4>;
-			dma-coherent;
-			status = "ok";
-			clocks = <&sata23clk 0>;
-			phys = <&phy2 0>;
-			phy-names = "sata-phy";
-		};
-
-		sata3: sata@1a800000 {
-			compatible = "apm,xgene-ahci";
-			reg = <0x0 0x1a800000 0x0 0x1000>,
-			      <0x0 0x1f230000 0x0 0x1000>,
-			      <0x0 0x1f23d000 0x0 0x1000>,
-			      <0x0 0x1f23e000 0x0 0x1000>;
-			interrupts = <0x0 0x88 0x4>;
-			dma-coherent;
-			status = "ok";
-			clocks = <&sata45clk 0>;
-			phys = <&phy3 0>;
-			phy-names = "sata-phy";
-		};
-
-		rtc: rtc@10510000 {
-			compatible = "apm,xgene-rtc";
-			reg = <0x0 0x10510000 0x0 0x400>;
-			interrupts = <0x0 0x46 0x4>;
-			#clock-cells = <1>;
-			clocks = <&rtcclk 0>;
-		};
-
-		menet: ethernet@17020000 {
-			compatible = "apm,xgene-enet";
-			status = "disabled";
-			reg = <0x0 0x17020000 0x0 0xd100>,
-			      <0x0 0X17030000 0x0 0X400>,
-			      <0x0 0X10000000 0x0 0X200>;
-			reg-names = "enet_csr", "ring_csr", "ring_cmd";
-			interrupts = <0x0 0x3c 0x4>;
-			dma-coherent;
-			clocks = <&menetclk 0>;
-			local-mac-address = [00 01 73 00 00 01];
-			phy-connection-type = "rgmii";
-			phy-handle = <&menetphy>;
-			mdio {
-				compatible = "apm,xgene-mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				menetphy: menetphy@3 {
-					compatible = "ethernet-phy-id001c.c915";
-					reg = <0x3>;
-				};
-
-			};
-		};
-	};
-};
diff --git a/src/arm64/foundation-v8.dts b/src/arm64/foundation-v8.dts
deleted file mode 100644
index 4a060906809d..000000000000
--- a/src/arm64/foundation-v8.dts
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * ARM Ltd.
- *
- * ARMv8 Foundation model DTS
- */
-
-/dts-v1/;
-
-/memreserve/ 0x80000000 0x00010000;
-
-/ {
-	model = "Foundation-v8A";
-	compatible = "arm,foundation-aarch64", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000 0 0x80000000>,
-		      <0x00000008 0x80000000 0 0x80000000>;
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x0 0x2c001000 0 0x1000>,
-		      <0x0 0x2c002000 0 0x1000>,
-		      <0x0 0x2c004000 0 0x2000>,
-		      <0x0 0x2c006000 0 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xff01>,
-			     <1 14 0xff01>,
-			     <1 11 0xff01>,
-			     <1 10 0xff01>;
-		clock-frequency = <100000000>;
-	};
-
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 60 4>,
-			     <0 61 4>,
-			     <0 62 4>,
-			     <0 63 4>;
-	};
-
-	smb {
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		arm,v2m-memory-map = "rs1";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		ethernet@2,02000000 {
-			compatible = "smsc,lan91c111";
-			reg = <2 0x02000000 0x10000>;
-			interrupts = <15>;
-		};
-
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
-
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
-
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
-
-		iofpga@3,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 3 0 0x200000>;
-
-			v2m_sysreg: sysreg@010000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x010000 0x1000>;
-			};
-
-			v2m_serial0: uart@090000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x090000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial1: uart@0a0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a0000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial2: uart@0b0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b0000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial3: uart@0c0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c0000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			virtio_block@0130000 {
-				compatible = "virtio,mmio";
-				reg = <0x130000 0x200>;
-				interrupts = <42>;
-			};
-		};
-	};
-};
diff --git a/src/arm64/rtsm_ve-aemv8a.dts b/src/arm64/rtsm_ve-aemv8a.dts
deleted file mode 100644
index 572005ea2217..000000000000
--- a/src/arm64/rtsm_ve-aemv8a.dts
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * ARM Ltd. Fast Models
- *
- * Architecture Envelope Model (AEM) ARMv8-A
- * ARMAEMv8AMPCT
- *
- * RTSM_VE_AEMv8A.lisa
- */
-
-/dts-v1/;
-
-/memreserve/ 0x80000000 0x00010000;
-
-/ {
-	model = "RTSM_VE_AEMv8A";
-	compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000 0 0x80000000>,
-		      <0x00000008 0x80000000 0 0x80000000>;
-	};
-
-	gic: interrupt-controller@2c001000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x0 0x2c001000 0 0x1000>,
-		      <0x0 0x2c002000 0 0x1000>,
-		      <0x0 0x2c004000 0 0x2000>,
-		      <0x0 0x2c006000 0 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xff01>,
-			     <1 14 0xff01>,
-			     <1 11 0xff01>,
-			     <1 10 0xff01>;
-		clock-frequency = <100000000>;
-	};
-
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 60 4>,
-			     <0 61 4>,
-			     <0 62 4>,
-			     <0 63 4>;
-	};
-
-	smb {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		/include/ "rtsm_ve-motherboard.dtsi"
-	};
-};
diff --git a/src/arm64/rtsm_ve-motherboard.dtsi b/src/arm64/rtsm_ve-motherboard.dtsi
deleted file mode 100644
index ac2cb2418025..000000000000
--- a/src/arm64/rtsm_ve-motherboard.dtsi
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * ARM Ltd. Fast Models
- *
- * Versatile Express (VE) system model
- * Motherboard component
- *
- * VEMotherBoard.lisa
- */
-
-	motherboard {
-		arm,v2m-memory-map = "rs1";
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-		#interrupt-cells = <1>;
-		ranges;
-
-		flash@0,00000000 {
-			compatible = "arm,vexpress-flash", "cfi-flash";
-			reg = <0 0x00000000 0x04000000>,
-			      <4 0x00000000 0x04000000>;
-			bank-width = <4>;
-		};
-
-		vram@2,00000000 {
-			compatible = "arm,vexpress-vram";
-			reg = <2 0x00000000 0x00800000>;
-		};
-
-		ethernet@2,02000000 {
-			compatible = "smsc,lan91c111";
-			reg = <2 0x02000000 0x10000>;
-			interrupts = <15>;
-		};
-
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
-
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
-
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
-
-		iofpga@3,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 3 0 0x200000>;
-
-			v2m_sysreg: sysreg@010000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x010000 0x1000>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			v2m_sysctl: sysctl@020000 {
-				compatible = "arm,sp810", "arm,primecell";
-				reg = <0x020000 0x1000>;
-				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
-				clock-names = "refclk", "timclk", "apb_pclk";
-				#clock-cells = <1>;
-				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-			};
-
-			aaci@040000 {
-				compatible = "arm,pl041", "arm,primecell";
-				reg = <0x040000 0x1000>;
-				interrupts = <11>;
-				clocks = <&v2m_clk24mhz>;
-				clock-names = "apb_pclk";
-			};
-
-			mmci@050000 {
-				compatible = "arm,pl180", "arm,primecell";
-				reg = <0x050000 0x1000>;
-				interrupts = <9 10>;
-				cd-gpios = <&v2m_sysreg 0 0>;
-				wp-gpios = <&v2m_sysreg 1 0>;
-				max-frequency = <12000000>;
-				vmmc-supply = <&v2m_fixed_3v3>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "mclk", "apb_pclk";
-			};
-
-			kmi@060000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x060000 0x1000>;
-				interrupts = <12>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-
-			kmi@070000 {
-				compatible = "arm,pl050", "arm,primecell";
-				reg = <0x070000 0x1000>;
-				interrupts = <13>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "KMIREFCLK", "apb_pclk";
-			};
-
-			v2m_serial0: uart@090000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x090000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial1: uart@0a0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a0000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial2: uart@0b0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b0000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial3: uart@0c0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c0000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			wdt@0f0000 {
-				compatible = "arm,sp805", "arm,primecell";
-				reg = <0x0f0000 0x1000>;
-				interrupts = <0>;
-				clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
-				clock-names = "wdogclk", "apb_pclk";
-			};
-
-			v2m_timer01: timer@110000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x110000 0x1000>;
-				interrupts = <2>;
-				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
-
-			v2m_timer23: timer@120000 {
-				compatible = "arm,sp804", "arm,primecell";
-				reg = <0x120000 0x1000>;
-				interrupts = <3>;
-				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
-				clock-names = "timclken1", "timclken2", "apb_pclk";
-			};
-
-			rtc@170000 {
-				compatible = "arm,pl031", "arm,primecell";
-				reg = <0x170000 0x1000>;
-				interrupts = <4>;
-				clocks = <&v2m_clk24mhz>;
-				clock-names = "apb_pclk";
-			};
-
-			clcd@1f0000 {
-				compatible = "arm,pl111", "arm,primecell";
-				reg = <0x1f0000 0x1000>;
-				interrupts = <14>;
-				clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
-				clock-names = "clcdclk", "apb_pclk";
-			};
-
-			virtio_block@0130000 {
-				compatible = "virtio,mmio";
-				reg = <0x130000 0x200>;
-				interrupts = <42>;
-			};
-		};
-
-		v2m_fixed_3v3: fixedregulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		mcc {
-			compatible = "arm,vexpress,config-bus";
-			arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-			v2m_oscclk1: osc@1 {
-				/* CLCD clock */
-				compatible = "arm,vexpress-osc";
-				arm,vexpress-sysreg,func = <1 1>;
-				freq-range = <23750000 63500000>;
-				#clock-cells = <0>;
-				clock-output-names = "v2m:oscclk1";
-			};
-
-			reset@0 {
-				compatible = "arm,vexpress-reset";
-				arm,vexpress-sysreg,func = <5 0>;
-			};
-
-			muxfpga@0 {
-				compatible = "arm,vexpress-muxfpga";
-				arm,vexpress-sysreg,func = <7 0>;
-			};
-
-			shutdown@0 {
-				compatible = "arm,vexpress-shutdown";
-				arm,vexpress-sysreg,func = <8 0>;
-			};
-
-			reboot@0 {
-				compatible = "arm,vexpress-reboot";
-				arm,vexpress-sysreg,func = <9 0>;
-			};
-
-			dvimode@0 {
-				compatible = "arm,vexpress-dvimode";
-				arm,vexpress-sysreg,func = <11 0>;
-			};
-		};
-	};
diff --git a/src/arm64/skeleton.dtsi b/src/arm64/skeleton.dtsi
deleted file mode 100644
index 38ead821bb42..000000000000
--- a/src/arm64/skeleton.dtsi
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Skeleton device tree; the bare minimum needed to boot; just include and
- * add a compatible value.  The bootloader will typically populate the memory
- * node.
- */
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	chosen { };
-	aliases { };
-	memory { device_type = "memory"; reg = <0 0 0>; };
-};
diff --git a/src/c6x/dsk6455.dts b/src/c6x/dsk6455.dts
deleted file mode 100644
index 2b71f800618d..000000000000
--- a/src/c6x/dsk6455.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/c6x/boot/dts/dsk6455.dts
- *
- * DSK6455 Evaluation Platform For TMS320C6455
- * Copyright (C) 2011 Texas Instruments Incorporated
- *
- * Author: Mark Salter <msalter@redhat.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- */
-
-/dts-v1/;
-
-/include/ "tms320c6455.dtsi"
-
-/ {
-	model = "Spectrum Digital DSK6455";
-	compatible = "spectrum-digital,dsk6455";
-
-	chosen {
-		bootargs = "root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0xE0000000 0x08000000>;
-	};
-
-	soc {
-		megamod_pic: interrupt-controller@1800000 {
-			interrupts = < 12 13 14 15 >;
-		};
-
-		emifa@70000000 {
-			flash@3,0 {
-				  #address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "cfi-flash";
-				reg = <0x3 0x0 0x400000>;
-				bank-width = <1>;
-				device-width = <1>;
-				partition@0 {
-					reg = <0x0 0x400000>;
-					label = "NOR";
-				};
-			};
-		};
-
-		timer1: timer@2980000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 69 >;
-		};
-
-		clock-controller@029a0000 {
-			clock-frequency = <50000000>;
-		};
-	};
-};
diff --git a/src/c6x/evmc6457.dts b/src/c6x/evmc6457.dts
deleted file mode 100644
index 0301eb9a8ff8..000000000000
--- a/src/c6x/evmc6457.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/c6x/boot/dts/evmc6457.dts
- *
- * EVMC6457 Evaluation Platform For TMS320C6457
- *
- * Copyright (C) 2011 Texas Instruments Incorporated
- *
- * Author: Mark Salter <msalter@redhat.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- */
-
-/dts-v1/;
-
-/include/ "tms320c6457.dtsi"
-
-/ {
-	model = "eInfochips EVMC6457";
-	compatible = "einfochips,evmc6457";
-
-	chosen {
-		bootargs = "console=hvc root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0xE0000000 0x10000000>;
-	};
-
-	soc {
-		megamod_pic: interrupt-controller@1800000 {
-		       interrupts = < 12 13 14 15 >;
-		};
-
-		timer0: timer@2940000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 67 >;
-		};
-
-		clock-controller@29a0000 {
-			clock-frequency = <60000000>;
-		};
-	};
-};
diff --git a/src/c6x/evmc6472.dts b/src/c6x/evmc6472.dts
deleted file mode 100644
index 3e207b449a93..000000000000
--- a/src/c6x/evmc6472.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/c6x/boot/dts/evmc6472.dts
- *
- * EVMC6472 Evaluation Platform For TMS320C6472
- *
- * Copyright (C) 2011 Texas Instruments Incorporated
- *
- * Author: Mark Salter <msalter@redhat.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- */
-
-/dts-v1/;
-
-/include/ "tms320c6472.dtsi"
-
-/ {
-	model = "eInfochips EVMC6472";
-	compatible = "einfochips,evmc6472";
-
-	chosen {
-		bootargs = "console=hvc root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0xE0000000 0x10000000>;
-	};
-
-	soc {
-		megamod_pic: interrupt-controller@1800000 {
-		       interrupts = < 12 13 14 15 >;
-		};
-
-		timer0: timer@25e0000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 16 >;
-		};
-
-		timer1: timer@25f0000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 16 >;
-		};
-
-		timer2: timer@2600000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 16 >;
-		};
-
-		timer3: timer@2610000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 16 >;
-		};
-
-		timer4: timer@2620000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 16 >;
-		};
-
-		timer5: timer@2630000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 16 >;
-		};
-
-		clock-controller@29a0000 {
-			clock-frequency = <25000000>;
-		};
-	};
-};
diff --git a/src/c6x/evmc6474.dts b/src/c6x/evmc6474.dts
deleted file mode 100644
index 4dc291292bc4..000000000000
--- a/src/c6x/evmc6474.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * arch/c6x/boot/dts/evmc6474.dts
- *
- * EVMC6474 Evaluation Platform For TMS320C6474
- *
- * Copyright (C) 2011 Texas Instruments Incorporated
- *
- * Author: Mark Salter <msalter@redhat.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- */
-
-/dts-v1/;
-
-/include/ "tms320c6474.dtsi"
-
-/ {
-	model = "Spectrum Digital EVMC6474";
-	compatible = "spectrum-digital,evmc6474";
-
-	chosen {
-		bootargs = "console=hvc root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x08000000>;
-	};
-
-	soc {
-		megamod_pic: interrupt-controller@1800000 {
-		       interrupts = < 12 13 14 15 >;
-		};
-
-		timer3: timer@2940000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 39 >;
-		};
-
-		timer4: timer@2950000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 41 >;
-		};
-
-		timer5: timer@2960000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 43 >;
-		};
-
-		clock-controller@29a0000 {
-			clock-frequency = <50000000>;
-		};
-	};
-};
diff --git a/src/c6x/evmc6678.dts b/src/c6x/evmc6678.dts
deleted file mode 100644
index ab686301d321..000000000000
--- a/src/c6x/evmc6678.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * arch/c6x/boot/dts/evmc6678.dts
- *
- * EVMC6678 Evaluation Platform For TMS320C6678
- *
- * Copyright (C) 2012 Texas Instruments Incorporated
- *
- * Author: Ken Cox <jkc@redhat.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- */
-
-/dts-v1/;
-
-/include/ "tms320c6678.dtsi"
-
-/ {
-	model = "Advantech EVMC6678";
-	compatible = "advantech,evmc6678";
-
-	chosen {
-		bootargs = "root=/dev/nfs ip=dhcp rw";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;
-	};
-
-	soc {
-		megamod_pic: interrupt-controller@1800000 {
-		       interrupts = < 12 13 14 15 >;
-		};
-
-		timer8: timer@2280000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 66 >;
-		};
-
-		timer9: timer@2290000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 68 >;
-		};
-
-		timer10: timer@22A0000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 70 >;
-		};
-
-		timer11: timer@22B0000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 72 >;
-		};
-
-		timer12: timer@22C0000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 74 >;
-		};
-
-		timer13: timer@22D0000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 76 >;
-		};
-
-		timer14: timer@22E0000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 78 >;
-		};
-
-		timer15: timer@22F0000 {
-			interrupt-parent = <&megamod_pic>;
-			interrupts = < 80 >;
-		};
-
-		clock-controller@2310000 {
-			clock-frequency = <100000000>;
-		};
-	};
-};
diff --git a/src/c6x/tms320c6455.dtsi b/src/c6x/tms320c6455.dtsi
deleted file mode 100644
index a804ec1e018b..000000000000
--- a/src/c6x/tms320c6455.dtsi
+++ /dev/null
@@ -1,96 +0,0 @@
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "ti,c64x+";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		model = "tms320c6455";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		core_pic: interrupt-controller {
-			  interrupt-controller;
-			  #interrupt-cells = <1>;
-			  compatible = "ti,c64x+core-pic";
-		};
-
-		/*
-		 * Megamodule interrupt controller
-		 */
-		megamod_pic: interrupt-controller@1800000 {
-		       compatible = "ti,c64x+megamod-pic";
-		       interrupt-controller;
-		       #interrupt-cells = <1>;
-		       reg = <0x1800000 0x1000>;
-		       interrupt-parent = <&core_pic>;
-		};
-
-		cache-controller@1840000 {
-			compatible = "ti,c64x+cache";
-			reg = <0x01840000 0x8400>;
-		};
-
-		emifa@70000000 {
-			compatible = "ti,c64x+emifa", "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <0x70000000 0x100>;
-			ranges = <0x2 0x0 0xa0000000 0x00000008
-			          0x3 0x0 0xb0000000 0x00400000
-				  0x4 0x0 0xc0000000 0x10000000
-				  0x5 0x0 0xD0000000 0x10000000>;
-
-			ti,dscr-dev-enable = <13>;
-			ti,emifa-burst-priority = <255>;
-			ti,emifa-ce-config = <0x00240120
-					      0x00240120
-					      0x00240122
-					      0x00240122>;
-		};
-
-		timer1: timer@2980000 {
-			compatible = "ti,c64x+timer64";
-			reg = <0x2980000 0x40>;
-			ti,dscr-dev-enable = <4>;
-		};
-
-		clock-controller@029a0000 {
-			compatible = "ti,c6455-pll", "ti,c64x+pll";
-			reg = <0x029a0000 0x200>;
-			ti,c64x+pll-bypass-delay = <1440>;
-			ti,c64x+pll-reset-delay = <15360>;
-			ti,c64x+pll-lock-delay = <24000>;
-		};
-
-		device-state-config-regs@2a80000 {
-			compatible = "ti,c64x+dscr";
-			reg = <0x02a80000 0x41000>;
-
-			ti,dscr-devstat = <0>;
-			ti,dscr-silicon-rev = <8 28 0xf>;
-			ti,dscr-rmii-resets = <0 0x40020 0x00040000>;
-
-			ti,dscr-locked-regs = <0x40008 0x40004 0x0f0a0b00>;
-			ti,dscr-devstate-ctl-regs =
-				 <0 12 0x40008 1 0  0  2
-				  12 1 0x40008 3 0 30  2
-				  13 2 0x4002c 1 0xffffffff 0 1>;
-			ti,dscr-devstate-stat-regs =
-				<0 10 0x40014 1 0  0  3
-				 10 2 0x40018 1 0  0  3>;
-		};
-	};
-};
diff --git a/src/c6x/tms320c6457.dtsi b/src/c6x/tms320c6457.dtsi
deleted file mode 100644
index 35f40709a719..000000000000
--- a/src/c6x/tms320c6457.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "ti,c64x+";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		model = "tms320c6457";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		core_pic: interrupt-controller {
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			compatible = "ti,c64x+core-pic";
-		};
-
-		megamod_pic: interrupt-controller@1800000 {
-			compatible = "ti,c64x+megamod-pic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&core_pic>;
-			reg = <0x1800000 0x1000>;
-		};
-
-		cache-controller@1840000 {
-			compatible = "ti,c64x+cache";
-			reg = <0x01840000 0x8400>;
-		};
-
-		device-state-controller@2880800 {
-			compatible = "ti,c64x+dscr";
-			reg = <0x02880800 0x400>;
-
-			ti,dscr-devstat = <0x20>;
-			ti,dscr-silicon-rev = <0x18 28 0xf>;
-			ti,dscr-mac-fuse-regs = <0x114 3 4 5 6
-						 0x118 0 0 1 2>;
-			ti,dscr-kick-regs = <0x38 0x83E70B13
-					     0x3c 0x95A4F1E0>;
-		};
-
-		timer0: timer@2940000 {
-			compatible = "ti,c64x+timer64";
-			reg = <0x2940000 0x40>;
-		};
-
-		clock-controller@29a0000 {
-			compatible = "ti,c6457-pll", "ti,c64x+pll";
-			reg = <0x029a0000 0x200>;
-			ti,c64x+pll-bypass-delay = <300>;
-			ti,c64x+pll-reset-delay = <24000>;
-			ti,c64x+pll-lock-delay = <50000>;
-		};
-	};
-};
diff --git a/src/c6x/tms320c6472.dtsi b/src/c6x/tms320c6472.dtsi
deleted file mode 100644
index b488aaec65c0..000000000000
--- a/src/c6x/tms320c6472.dtsi
+++ /dev/null
@@ -1,134 +0,0 @@
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			reg = <0>;
-			model = "ti,c64x+";
-		};
-		cpu@1 {
-			device_type = "cpu";
-			reg = <1>;
-			model = "ti,c64x+";
-		};
-		cpu@2 {
-			device_type = "cpu";
-			reg = <2>;
-			model = "ti,c64x+";
-		};
-		cpu@3 {
-			device_type = "cpu";
-			reg = <3>;
-			model = "ti,c64x+";
-		};
-		cpu@4 {
-			device_type = "cpu";
-			reg = <4>;
-			model = "ti,c64x+";
-		};
-		cpu@5 {
-			device_type = "cpu";
-			reg = <5>;
-			model = "ti,c64x+";
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		model = "tms320c6472";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		core_pic: interrupt-controller {
-			compatible = "ti,c64x+core-pic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		megamod_pic: interrupt-controller@1800000 {
-		       compatible = "ti,c64x+megamod-pic";
-		       interrupt-controller;
-		       #interrupt-cells = <1>;
-		       reg = <0x1800000 0x1000>;
-		       interrupt-parent = <&core_pic>;
-		};
-
-		cache-controller@1840000 {
-			compatible = "ti,c64x+cache";
-			reg = <0x01840000 0x8400>;
-		};
-
-		timer0: timer@25e0000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x01 >;
-			reg = <0x25e0000 0x40>;
-		};
-
-		timer1: timer@25f0000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x02 >;
-			reg = <0x25f0000 0x40>;
-		};
-
-		timer2: timer@2600000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x04 >;
-			reg = <0x2600000 0x40>;
-		};
-
-		timer3: timer@2610000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x08 >;
-			reg = <0x2610000 0x40>;
-		};
-
-		timer4: timer@2620000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x10 >;
-			reg = <0x2620000 0x40>;
-		};
-
-		timer5: timer@2630000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x20 >;
-			reg = <0x2630000 0x40>;
-		};
-
-		clock-controller@29a0000 {
-			compatible = "ti,c6472-pll", "ti,c64x+pll";
-			reg = <0x029a0000 0x200>;
-			ti,c64x+pll-bypass-delay = <200>;
-			ti,c64x+pll-reset-delay = <12000>;
-			ti,c64x+pll-lock-delay = <80000>;
-		};
-
-		device-state-controller@2a80000 {
-			compatible = "ti,c64x+dscr";
-			reg = <0x02a80000 0x1000>;
-
-			ti,dscr-devstat = <0>;
-			ti,dscr-silicon-rev = <0x70c 16 0xff>;
-
-			ti,dscr-mac-fuse-regs = <0x700 1 2 3 4
-						 0x704 5 6 0 0>;
-
-			ti,dscr-rmii-resets = <0x208 1
-					       0x20c 1>;
-
-			ti,dscr-locked-regs = <0x200 0x204 0x0a1e183a
-					       0x40c 0x420 0xbea7
-					       0x41c 0x420 0xbea7>;
-
-			ti,dscr-privperm = <0x41c 0xaaaaaaaa>;
-
-			ti,dscr-devstate-ctl-regs = <0 13 0x200 1 0 0 1>;
-		};
-	};
-};
diff --git a/src/c6x/tms320c6474.dtsi b/src/c6x/tms320c6474.dtsi
deleted file mode 100644
index cc601bf348a1..000000000000
--- a/src/c6x/tms320c6474.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			reg = <0>;
-			model = "ti,c64x+";
-		};
-		cpu@1 {
-			device_type = "cpu";
-			reg = <1>;
-			model = "ti,c64x+";
-		};
-		cpu@2 {
-			device_type = "cpu";
-			reg = <2>;
-			model = "ti,c64x+";
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		model = "tms320c6474";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		core_pic: interrupt-controller {
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			compatible = "ti,c64x+core-pic";
-		};
-
-		megamod_pic: interrupt-controller@1800000 {
-		       compatible = "ti,c64x+megamod-pic";
-		       interrupt-controller;
-		       #interrupt-cells = <1>;
-		       reg = <0x1800000 0x1000>;
-		       interrupt-parent = <&core_pic>;
-		};
-
-		cache-controller@1840000 {
-			compatible = "ti,c64x+cache";
-			reg = <0x01840000 0x8400>;
-		};
-
-		timer3: timer@2940000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x04 >;
-			reg = <0x2940000 0x40>;
-		};
-
-		timer4: timer@2950000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x02 >;
-			reg = <0x2950000 0x40>;
-		};
-
-		timer5: timer@2960000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x01 >;
-			reg = <0x2960000 0x40>;
-		};
-
-		device-state-controller@2880800 {
-			compatible = "ti,c64x+dscr";
-			reg = <0x02880800 0x400>;
-
-			ti,dscr-devstat = <0x004>;
-			ti,dscr-silicon-rev = <0x014 28 0xf>;
-			ti,dscr-mac-fuse-regs = <0x34 3 4 5 6
-						 0x38 0 0 1 2>;
-		};
-
-		clock-controller@29a0000 {
-			compatible = "ti,c6474-pll", "ti,c64x+pll";
-			reg = <0x029a0000 0x200>;
-			ti,c64x+pll-bypass-delay = <120>;
-			ti,c64x+pll-reset-delay = <30000>;
-			ti,c64x+pll-lock-delay = <60000>;
-		};
-	};
-};
diff --git a/src/c6x/tms320c6678.dtsi b/src/c6x/tms320c6678.dtsi
deleted file mode 100644
index 386196e5eae7..000000000000
--- a/src/c6x/tms320c6678.dtsi
+++ /dev/null
@@ -1,146 +0,0 @@
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			reg = <0>;
-			model = "ti,c66x";
-		};
-		cpu@1 {
-			device_type = "cpu";
-			reg = <1>;
-			model = "ti,c66x";
-		};
-		cpu@2 {
-			device_type = "cpu";
-			reg = <2>;
-			model = "ti,c66x";
-		};
-		cpu@3 {
-			device_type = "cpu";
-			reg = <3>;
-			model = "ti,c66x";
-		};
-		cpu@4 {
-			device_type = "cpu";
-			reg = <4>;
-			model = "ti,c66x";
-		};
-		cpu@5 {
-			device_type = "cpu";
-			reg = <5>;
-			model = "ti,c66x";
-		};
-		cpu@6 {
-			device_type = "cpu";
-			reg = <6>;
-			model = "ti,c66x";
-		};
-		cpu@7 {
-			device_type = "cpu";
-			reg = <7>;
-			model = "ti,c66x";
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		model = "tms320c6678";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		core_pic: interrupt-controller {
-			compatible = "ti,c64x+core-pic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		megamod_pic: interrupt-controller@1800000 {
-		       compatible = "ti,c64x+megamod-pic";
-		       interrupt-controller;
-		       #interrupt-cells = <1>;
-		       reg = <0x1800000 0x1000>;
-		       interrupt-parent = <&core_pic>;
-		};
-
-		cache-controller@1840000 {
-			compatible = "ti,c64x+cache";
-			reg = <0x01840000 0x8400>;
-		};
-
-		timer8: timer@2280000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x01 >;
-			reg = <0x2280000 0x40>;
-		};
-
-		timer9: timer@2290000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x02 >;
-			reg = <0x2290000 0x40>;
-		};
-
-		timer10: timer@22A0000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x04 >;
-			reg = <0x22A0000 0x40>;
-		};
-
-		timer11: timer@22B0000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x08 >;
-			reg = <0x22B0000 0x40>;
-		};
-
-		timer12: timer@22C0000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x10 >;
-			reg = <0x22C0000 0x40>;
-		};
-
-		timer13: timer@22D0000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x20 >;
-			reg = <0x22D0000 0x40>;
-		};
-
-		timer14: timer@22E0000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x40 >;
-			reg = <0x22E0000 0x40>;
-		};
-
-		timer15: timer@22F0000 {
-			compatible = "ti,c64x+timer64";
-			ti,core-mask = < 0x80 >;
-			reg = <0x22F0000 0x40>;
-		};
-
-		clock-controller@2310000 {
-			compatible = "ti,c6678-pll", "ti,c64x+pll";
-			reg = <0x02310000 0x200>;
-			ti,c64x+pll-bypass-delay = <200>;
-			ti,c64x+pll-reset-delay = <12000>;
-			ti,c64x+pll-lock-delay = <80000>;
-		};
-
-		device-state-controller@2620000 {
-			compatible = "ti,c64x+dscr";
-			reg = <0x02620000 0x1000>;
-
-			ti,dscr-devstat = <0x20>;
-			ti,dscr-silicon-rev = <0x18 28 0xf>;
-
-			ti,dscr-mac-fuse-regs = <0x110 1 2 3 4
-						 0x114 5 6 0 0>;
-
-		};
-	};
-};
diff --git a/src/metag/skeleton.dts b/src/metag/skeleton.dts
deleted file mode 100644
index 7a49aeb365d0..000000000000
--- a/src/metag/skeleton.dts
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Copyright (C) 2012 Imagination Technologies Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "skeleton.dtsi"
diff --git a/src/metag/skeleton.dtsi b/src/metag/skeleton.dtsi
deleted file mode 100644
index 78229eacced7..000000000000
--- a/src/metag/skeleton.dtsi
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Skeleton device tree; the bare minimum needed to boot; just include and
- * add a compatible value.  The bootloader will typically populate the memory
- * node.
- */
-
-/ {
-	compatible = "img,meta";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-	aliases { };
-	memory { device_type = "memory"; reg = <0 0>; };
-};
diff --git a/src/metag/tz1090.dtsi b/src/metag/tz1090.dtsi
deleted file mode 100644
index 24ea7d2e9138..000000000000
--- a/src/metag/tz1090.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright (C) 2012 Imagination Technologies Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "toumaz,tz1090", "img,meta";
-
-	interrupt-parent = <&intc>;
-
-	intc: interrupt-controller {
-		compatible = "img,meta-intc";
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		num-banks = <2>;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		pdc: pdc@0x02006000 {
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			reg = <0x02006000 0x1000>;
-			compatible = "img,pdc-intc";
-
-			num-perips = <3>;
-			num-syswakes = <3>;
-
-			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>, /* Syswakes */
-			             <30 IRQ_TYPE_LEVEL_HIGH>, /* Perip 0 (RTC) */
-			             <29 IRQ_TYPE_LEVEL_HIGH>, /* Perip 1 (IR) */
-			             <31 IRQ_TYPE_LEVEL_HIGH>; /* Perip 2 (WDT) */
-		};
-
-		pinctrl: pinctrl@02005800 {
-			#gpio-range-cells = <3>;
-			compatible = "img,tz1090-pinctrl";
-			reg = <0x02005800 0xe4>;
-		};
-
-		pdc_pinctrl: pinctrl@02006500 {
-			#gpio-range-cells = <3>;
-			compatible = "img,tz1090-pdc-pinctrl";
-			reg = <0x02006500 0x100>;
-		};
-
-		gpios: gpios@02005800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "img,tz1090-gpio";
-			reg = <0x02005800 0x90>;
-
-			gpios0: bank@0 {
-				gpio-controller;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				reg = <0>;
-				interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-ranges = <&pinctrl 0 0 30>;
-			};
-			gpios1: bank@1 {
-				gpio-controller;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				reg = <1>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-ranges = <&pinctrl 0 30 30>;
-			};
-			gpios2: bank@2 {
-				gpio-controller;
-				interrupt-controller;
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				reg = <2>;
-				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-ranges = <&pinctrl 0 60 30>;
-			};
-		};
-
-		pdc_gpios: gpios@02006500 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			compatible = "img,tz1090-pdc-gpio";
-			reg = <0x02006500 0x100>;
-
-			interrupt-parent = <&pdc>;
-			interrupts =	<8  IRQ_TYPE_NONE>,
-					<9  IRQ_TYPE_NONE>,
-					<10 IRQ_TYPE_NONE>;
-			gpio-ranges = <&pdc_pinctrl 0 0 7>;
-		};
-	};
-};
diff --git a/src/metag/tz1090_generic.dts b/src/metag/tz1090_generic.dts
deleted file mode 100644
index f96090955964..000000000000
--- a/src/metag/tz1090_generic.dts
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Copyright (C) 2012 Imagination Technologies Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "tz1090.dtsi"
diff --git a/src/microblaze/system.dts b/src/microblaze/system.dts
deleted file mode 100644
index b620da23febb..000000000000
--- a/src/microblaze/system.dts
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Device Tree Generator version: 1.1
- *
- * (C) Copyright 2007-2008 Xilinx, Inc.
- * (C) Copyright 2007-2009 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
- *
- * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
- */
-
-/dts-v1/;
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "xlnx,microblaze";
-	hard-reset-gpios = <&LEDs_8Bit 2 1>;
-	model = "testing";
-	DDR2_SDRAM: memory@90000000 {
-		device_type = "memory";
-		reg = < 0x90000000 0x10000000 >;
-	} ;
-	aliases {
-		ethernet0 = &Hard_Ethernet_MAC;
-		serial0 = &RS232_Uart_1;
-	} ;
-	chosen {
-		bootargs = "console=ttyUL0,115200 highres=on";
-		linux,stdout-path = "/plb@0/serial@84000000";
-	} ;
-	cpus {
-		#address-cells = <1>;
-		#cpus = <0x1>;
-		#size-cells = <0>;
-		microblaze_0: cpu@0 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,microblaze-7.10.d";
-			d-cache-baseaddr = <0x90000000>;
-			d-cache-highaddr = <0x9fffffff>;
-			d-cache-line-size = <0x10>;
-			d-cache-size = <0x2000>;
-			device_type = "cpu";
-			i-cache-baseaddr = <0x90000000>;
-			i-cache-highaddr = <0x9fffffff>;
-			i-cache-line-size = <0x10>;
-			i-cache-size = <0x2000>;
-			model = "microblaze,7.10.d";
-			reg = <0>;
-			timebase-frequency = <125000000>;
-			xlnx,addr-tag-bits = <0xf>;
-			xlnx,allow-dcache-wr = <0x1>;
-			xlnx,allow-icache-wr = <0x1>;
-			xlnx,area-optimized = <0x0>;
-			xlnx,cache-byte-size = <0x2000>;
-			xlnx,d-lmb = <0x1>;
-			xlnx,d-opb = <0x0>;
-			xlnx,d-plb = <0x1>;
-			xlnx,data-size = <0x20>;
-			xlnx,dcache-addr-tag = <0xf>;
-			xlnx,dcache-always-used = <0x1>;
-			xlnx,dcache-byte-size = <0x2000>;
-			xlnx,dcache-line-len = <0x4>;
-			xlnx,dcache-use-fsl = <0x1>;
-			xlnx,debug-enabled = <0x1>;
-			xlnx,div-zero-exception = <0x1>;
-			xlnx,dopb-bus-exception = <0x0>;
-			xlnx,dynamic-bus-sizing = <0x1>;
-			xlnx,edge-is-positive = <0x1>;
-			xlnx,family = "virtex5";
-			xlnx,endianness = <0x1>;
-			xlnx,fpu-exception = <0x1>;
-			xlnx,fsl-data-size = <0x20>;
-			xlnx,fsl-exception = <0x0>;
-			xlnx,fsl-links = <0x0>;
-			xlnx,i-lmb = <0x1>;
-			xlnx,i-opb = <0x0>;
-			xlnx,i-plb = <0x1>;
-			xlnx,icache-always-used = <0x1>;
-			xlnx,icache-line-len = <0x4>;
-			xlnx,icache-use-fsl = <0x1>;
-			xlnx,ill-opcode-exception = <0x1>;
-			xlnx,instance = "microblaze_0";
-			xlnx,interconnect = <0x1>;
-			xlnx,interrupt-is-edge = <0x0>;
-			xlnx,iopb-bus-exception = <0x0>;
-			xlnx,mmu-dtlb-size = <0x4>;
-			xlnx,mmu-itlb-size = <0x2>;
-			xlnx,mmu-tlb-access = <0x3>;
-			xlnx,mmu-zones = <0x10>;
-			xlnx,number-of-pc-brk = <0x1>;
-			xlnx,number-of-rd-addr-brk = <0x0>;
-			xlnx,number-of-wr-addr-brk = <0x0>;
-			xlnx,opcode-0x0-illegal = <0x1>;
-			xlnx,pvr = <0x2>;
-			xlnx,pvr-user1 = <0x0>;
-			xlnx,pvr-user2 = <0x0>;
-			xlnx,reset-msr = <0x0>;
-			xlnx,sco = <0x0>;
-			xlnx,unaligned-exceptions = <0x1>;
-			xlnx,use-barrel = <0x1>;
-			xlnx,use-dcache = <0x1>;
-			xlnx,use-div = <0x1>;
-			xlnx,use-ext-brk = <0x1>;
-			xlnx,use-ext-nm-brk = <0x1>;
-			xlnx,use-extended-fsl-instr = <0x0>;
-			xlnx,use-fpu = <0x2>;
-			xlnx,use-hw-mul = <0x2>;
-			xlnx,use-icache = <0x1>;
-			xlnx,use-interrupt = <0x1>;
-			xlnx,use-mmu = <0x3>;
-			xlnx,use-msr-instr = <0x1>;
-			xlnx,use-pcmp-instr = <0x1>;
-		} ;
-	} ;
-	mb_plb: plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
-		ranges ;
-		FLASH: flash@a0000000 {
-			bank-width = <2>;
-			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
-			reg = < 0xa0000000 0x2000000 >;
-			xlnx,family = "virtex5";
-			xlnx,include-datawidth-matching-0 = <0x1>;
-			xlnx,include-datawidth-matching-1 = <0x0>;
-			xlnx,include-datawidth-matching-2 = <0x0>;
-			xlnx,include-datawidth-matching-3 = <0x0>;
-			xlnx,include-negedge-ioregs = <0x0>;
-			xlnx,include-plb-ipif = <0x1>;
-			xlnx,include-wrbuf = <0x1>;
-			xlnx,max-mem-width = <0x10>;
-			xlnx,mch-native-dwidth = <0x20>;
-			xlnx,mch-plb-clk-period-ps = <0x1f40>;
-			xlnx,mch-splb-awidth = <0x20>;
-			xlnx,mch0-accessbuf-depth = <0x10>;
-			xlnx,mch0-protocol = <0x0>;
-			xlnx,mch0-rddatabuf-depth = <0x10>;
-			xlnx,mch1-accessbuf-depth = <0x10>;
-			xlnx,mch1-protocol = <0x0>;
-			xlnx,mch1-rddatabuf-depth = <0x10>;
-			xlnx,mch2-accessbuf-depth = <0x10>;
-			xlnx,mch2-protocol = <0x0>;
-			xlnx,mch2-rddatabuf-depth = <0x10>;
-			xlnx,mch3-accessbuf-depth = <0x10>;
-			xlnx,mch3-protocol = <0x0>;
-			xlnx,mch3-rddatabuf-depth = <0x10>;
-			xlnx,mem0-width = <0x10>;
-			xlnx,mem1-width = <0x20>;
-			xlnx,mem2-width = <0x20>;
-			xlnx,mem3-width = <0x20>;
-			xlnx,num-banks-mem = <0x1>;
-			xlnx,num-channels = <0x0>;
-			xlnx,priority-mode = <0x0>;
-			xlnx,synch-mem-0 = <0x0>;
-			xlnx,synch-mem-1 = <0x0>;
-			xlnx,synch-mem-2 = <0x0>;
-			xlnx,synch-mem-3 = <0x0>;
-			xlnx,synch-pipedelay-0 = <0x2>;
-			xlnx,synch-pipedelay-1 = <0x2>;
-			xlnx,synch-pipedelay-2 = <0x2>;
-			xlnx,synch-pipedelay-3 = <0x2>;
-			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
-			xlnx,tavdv-ps-mem-1 = <0x3a98>;
-			xlnx,tavdv-ps-mem-2 = <0x3a98>;
-			xlnx,tavdv-ps-mem-3 = <0x3a98>;
-			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
-			xlnx,tcedv-ps-mem-1 = <0x3a98>;
-			xlnx,tcedv-ps-mem-2 = <0x3a98>;
-			xlnx,tcedv-ps-mem-3 = <0x3a98>;
-			xlnx,thzce-ps-mem-0 = <0x88b8>;
-			xlnx,thzce-ps-mem-1 = <0x1b58>;
-			xlnx,thzce-ps-mem-2 = <0x1b58>;
-			xlnx,thzce-ps-mem-3 = <0x1b58>;
-			xlnx,thzoe-ps-mem-0 = <0x1b58>;
-			xlnx,thzoe-ps-mem-1 = <0x1b58>;
-			xlnx,thzoe-ps-mem-2 = <0x1b58>;
-			xlnx,thzoe-ps-mem-3 = <0x1b58>;
-			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
-			xlnx,tlzwe-ps-mem-1 = <0x0>;
-			xlnx,tlzwe-ps-mem-2 = <0x0>;
-			xlnx,tlzwe-ps-mem-3 = <0x0>;
-			xlnx,twc-ps-mem-0 = <0x2af8>;
-			xlnx,twc-ps-mem-1 = <0x3a98>;
-			xlnx,twc-ps-mem-2 = <0x3a98>;
-			xlnx,twc-ps-mem-3 = <0x3a98>;
-			xlnx,twp-ps-mem-0 = <0x11170>;
-			xlnx,twp-ps-mem-1 = <0x2ee0>;
-			xlnx,twp-ps-mem-2 = <0x2ee0>;
-			xlnx,twp-ps-mem-3 = <0x2ee0>;
-			xlnx,xcl0-linesize = <0x4>;
-			xlnx,xcl0-writexfer = <0x1>;
-			xlnx,xcl1-linesize = <0x4>;
-			xlnx,xcl1-writexfer = <0x1>;
-			xlnx,xcl2-linesize = <0x4>;
-			xlnx,xcl2-writexfer = <0x1>;
-			xlnx,xcl3-linesize = <0x4>;
-			xlnx,xcl3-writexfer = <0x1>;
-		} ;
-		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,compound";
-			ranges ;
-			ethernet@81c00000 {
-				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 5 2 >;
-				llink-connected = <&PIM3>;
-				local-mac-address = [ 00 0a 35 00 00 00 ];
-				reg = < 0x81c00000 0x40 >;
-				xlnx,bus2core-clk-ratio = <0x1>;
-				xlnx,phy-type = <0x1>;
-				xlnx,phyaddr = <0x1>;
-				xlnx,rxcsum = <0x0>;
-				xlnx,rxfifo = <0x1000>;
-				xlnx,temac-type = <0x0>;
-				xlnx,txcsum = <0x0>;
-				xlnx,txfifo = <0x1000>;
-			} ;
-		} ;
-		IIC_EEPROM: i2c@81600000 {
-			compatible = "xlnx,xps-iic-2.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 6 2 >;
-			reg = < 0x81600000 0x10000 >;
-			xlnx,clk-freq = <0x7735940>;
-			xlnx,family = "virtex5";
-			xlnx,gpo-width = <0x1>;
-			xlnx,iic-freq = <0x186a0>;
-			xlnx,scl-inertial-delay = <0x0>;
-			xlnx,sda-inertial-delay = <0x0>;
-			xlnx,ten-bit-adr = <0x0>;
-		} ;
-		LEDs_8Bit: gpio@81400000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 7 2 >;
-			reg = < 0x81400000 0x10000 >;
-			xlnx,all-inputs = <0x0>;
-			xlnx,all-inputs-2 = <0x0>;
-			xlnx,dout-default = <0x0>;
-			xlnx,dout-default-2 = <0x0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <0x8>;
-			xlnx,interrupt-present = <0x1>;
-			xlnx,is-bidir = <0x1>;
-			xlnx,is-bidir-2 = <0x1>;
-			xlnx,is-dual = <0x0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		} ;
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&LEDs_8Bit 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&LEDs_8Bit 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&LEDs_8Bit 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&LEDs_8Bit 7 1>;
-			};
-		} ;
-		RS232_Uart_1: serial@84000000 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,xps-uartlite-1.00.a";
-			current-speed = <115200>;
-			device_type = "serial";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 8 0 >;
-			port-number = <0>;
-			reg = < 0x84000000 0x10000 >;
-			xlnx,baudrate = <0x1c200>;
-			xlnx,data-bits = <0x8>;
-			xlnx,family = "virtex5";
-			xlnx,odd-parity = <0x0>;
-			xlnx,use-parity = <0x0>;
-		} ;
-		SysACE_CompactFlash: sysace@83600000 {
-			compatible = "xlnx,xps-sysace-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 4 2 >;
-			reg = < 0x83600000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,mem-width = <0x10>;
-		} ;
-		debug_module: debug@84400000 {
-			compatible = "xlnx,mdm-1.00.d";
-			reg = < 0x84400000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,interconnect = <0x1>;
-			xlnx,jtag-chain = <0x2>;
-			xlnx,mb-dbg-ports = <0x1>;
-			xlnx,uart-width = <0x8>;
-			xlnx,use-uart = <0x1>;
-			xlnx,write-fsl-ports = <0x0>;
-		} ;
-		mpmc@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,mpmc-4.02.a";
-			ranges ;
-			PIM3: sdma@84600180 {
-				compatible = "xlnx,ll-dma-1.00.a";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 2 2 1 2 >;
-				reg = < 0x84600180 0x80 >;
-			} ;
-		} ;
-		xps_intc_0: interrupt-controller@81800000 {
-			#interrupt-cells = <0x2>;
-			compatible = "xlnx,xps-intc-1.00.a";
-			interrupt-controller ;
-			reg = < 0x81800000 0x10000 >;
-			xlnx,kind-of-intr = <0x100>;
-			xlnx,num-intr-inputs = <0x9>;
-		} ;
-		xps_timer_1: timer@83c00000 {
-			compatible = "xlnx,xps-timer-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 3 2 >;
-			reg = < 0x83c00000 0x10000 >;
-			xlnx,count-width = <0x20>;
-			xlnx,family = "virtex5";
-			xlnx,gen0-assert = <0x1>;
-			xlnx,gen1-assert = <0x1>;
-			xlnx,one-timer-only = <0x0>;
-			xlnx,trig0-assert = <0x1>;
-			xlnx,trig1-assert = <0x1>;
-		} ;
-	} ;
-}  ;
diff --git a/src/mips/danube.dtsi b/src/mips/danube.dtsi
deleted file mode 100644
index d4c59e003708..000000000000
--- a/src/mips/danube.dtsi
+++ /dev/null
@@ -1,105 +0,0 @@
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "lantiq,xway", "lantiq,danube";
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips24Kc";
-		};
-	};
-
-	biu@1F800000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,biu", "simple-bus";
-		reg = <0x1F800000 0x800000>;
-		ranges = <0x0 0x1F800000 0x7FFFFF>;
-
-		icu0: icu@80200 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "lantiq,icu";
-			reg = <0x80200 0x120>;
-		};
-
-		watchdog@803F0 {
-			compatible = "lantiq,wdt";
-			reg = <0x803F0 0x10>;
-		};
-	};
-
-	sram@1F000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,sram";
-		reg = <0x1F000000 0x800000>;
-		ranges = <0x0 0x1F000000 0x7FFFFF>;
-
-		eiu0: eiu@101000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			interrupt-parent;
-			compatible = "lantiq,eiu-xway";
-			reg = <0x101000 0x1000>;
-		};
-
-		pmu0: pmu@102000 {
-			compatible = "lantiq,pmu-xway";
-			reg = <0x102000 0x1000>;
-		};
-
-		cgu0: cgu@103000 {
-			compatible = "lantiq,cgu-xway";
-			reg = <0x103000 0x1000>;
-			#clock-cells = <1>;
-		};
-
-		rcu0: rcu@203000 {
-			compatible = "lantiq,rcu-xway";
-			reg = <0x203000 0x1000>;
-		};
-	};
-
-	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "lantiq,fpi", "simple-bus";
-		ranges = <0x0 0x10000000 0xEEFFFFF>;
-		reg = <0x10000000 0xEF00000>;
-
-		gptu@E100A00 {
-			compatible = "lantiq,gptu-xway";
-			reg = <0xE100A00 0x100>;
-		};
-
-		serial@E100C00 {
-			compatible = "lantiq,asc";
-			reg = <0xE100C00 0x400>;
-			interrupt-parent = <&icu0>;
-			interrupts = <112 113 114>;
-		};
-
-		dma0: dma@E104100 {
-			compatible = "lantiq,dma-xway";
-			reg = <0xE104100 0x800>;
-		};
-
-		ebu0: ebu@E105300 {
-			compatible = "lantiq,ebu-xway";
-			reg = <0xE105300 0x100>;
-		};
-
-		pci0: pci@E105400 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			compatible = "lantiq,pci-xway";
-			bus-range = <0x0 0x0>;
-			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000	/* pci memory */
-				  0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
-			reg = <0x7000000 0x8000		/* config space */
-				0xE105400 0x400>;	/* pci bridge */
-		};
-	};
-};
diff --git a/src/mips/easy50712.dts b/src/mips/easy50712.dts
deleted file mode 100644
index 143b8a37b5e4..000000000000
--- a/src/mips/easy50712.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/dts-v1/;
-
-/include/ "danube.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
-	fpi@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		localbus@0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-				1 0 0x4000000 0x4000010>; /* addsel1 */
-			compatible = "lantiq,localbus", "simple-bus";
-
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "uboot";
-					reg = <0x00000 0x10000>; /* 64 KB */
-				};
-
-				partition@10000 {
-					label = "uboot_env";
-					reg = <0x10000 0x10000>; /* 64 KB */
-				};
-
-				partition@20000 {
-					label = "linux";
-					reg = <0x20000 0x3d0000>;
-				};
-
-				partition@400000 {
-					label = "rootfs";
-					reg = <0x400000 0x400000>;
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-xway";
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100B10 0xA0>;
-
-			state_default: pinmux {
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-				};
-				exin {
-					lantiq,groups = "exin1";
-					lantiq,function = "exin";
-				};
-				pci {
-					lantiq,groups = "gnt1";
-					lantiq,function = "pci";
-				};
-				conf_out {
-					lantiq,pins = "io4", "io5", "io6"; /* stp */
-					lantiq,open-drain;
-					lantiq,pull = <0>;
-				};
-			};
-		};
-
-		etop@E180000 {
-			compatible = "lantiq,etop-xway";
-			reg = <0xE180000 0x40000>;
-			interrupt-parent = <&icu0>;
-			interrupts = <73 78>;
-			phy-mode = "rmii";
-			mac-address = [ 00 11 22 33 44 55 ];
-		};
-
-		stp0: stp@E100BB0 {
-			#gpio-cells = <2>;
-			compatible = "lantiq,gpio-stp-xway";
-			gpio-controller;
-			reg = <0xE100BB0 0x40>;
-
-			lantiq,shadow = <0xfff>;
-			lantiq,groups = <0x3>;
-		};
-
-		pci@E105400 {
-			lantiq,bus-clock = <33333333>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
-			>;
-			gpios-reset = <&gpio 21 0>;
-			req-mask = <0x1>;		/* GNT1 */
-		};
-
-	};
-};
diff --git a/src/mips/mt7620a.dtsi b/src/mips/mt7620a.dtsi
deleted file mode 100644
index 08bf24fefe9f..000000000000
--- a/src/mips/mt7620a.dtsi
+++ /dev/null
@@ -1,58 +0,0 @@
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "ralink,mtk7620a-soc";
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips24KEc";
-		};
-	};
-
-	cpuintc: cpuintc@0 {
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		compatible = "mti,cpu-interrupt-controller";
-	};
-
-	palmbus@10000000 {
-		compatible = "palmbus";
-		reg = <0x10000000 0x200000>;
-                ranges = <0x0 0x10000000 0x1FFFFF>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysc@0 {
-			compatible = "ralink,mt7620a-sysc";
-			reg = <0x0 0x100>;
-		};
-
-		intc: intc@200 {
-			compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
-			reg = <0x200 0x100>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>;
-		};
-
-		memc@300 {
-			compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
-			reg = <0x300 0x100>;
-		};
-
-		uartlite@c00 {
-			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
-			reg = <0xc00 0x100>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <12>;
-
-			reg-shift = <2>;
-		};
-	};
-};
diff --git a/src/mips/mt7620a_eval.dts b/src/mips/mt7620a_eval.dts
deleted file mode 100644
index 709f58132f5c..000000000000
--- a/src/mips/mt7620a_eval.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-/dts-v1/;
-
-/include/ "mt7620a.dtsi"
-
-/ {
-	compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
-	model = "Ralink MT7620A evaluation board";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-};
diff --git a/src/mips/octeon_3xxx.dts b/src/mips/octeon_3xxx.dts
deleted file mode 100644
index fa33115bde33..000000000000
--- a/src/mips/octeon_3xxx.dts
+++ /dev/null
@@ -1,590 +0,0 @@
-/dts-v1/;
-/*
- * OCTEON 3XXX, 5XXX, 63XX device tree skeleton.
- *
- * This device tree is pruned and patched by early boot code before
- * use.	 Because of this, it contains a super-set of the available
- * devices and properties.
- */
-/ {
-	compatible = "cavium,octeon-3860";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&ciu>;
-
-	soc@0 {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges; /* Direct mapping */
-
-		ciu: interrupt-controller@1070000000000 {
-			compatible = "cavium,octeon-3860-ciu";
-			interrupt-controller;
-			/* Interrupts are specified by two parts:
-			 * 1) Controller register (0 or 1)
-			 * 2) Bit within the register (0..63)
-			 */
-			#interrupt-cells = <2>;
-			reg = <0x10700 0x00000000 0x0 0x7000>;
-		};
-
-		gpio: gpio-controller@1070000000800 {
-			#gpio-cells = <2>;
-			compatible = "cavium,octeon-3860-gpio";
-			reg = <0x10700 0x00000800 0x0 0x100>;
-			gpio-controller;
-			/* Interrupts are specified by two parts:
-			 * 1) GPIO pin number (0..15)
-			 * 2) Triggering (1 - edge rising
-			 *		  2 - edge falling
-			 *		  4 - level active high
-			 *		  8 - level active low)
-			 */
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			/* The GPIO pin connect to 16 consecutive CUI bits */
-			interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
-				     <0 20>, <0 21>, <0 22>, <0 23>,
-				     <0 24>, <0 25>, <0 26>, <0 27>,
-				     <0 28>, <0 29>, <0 30>, <0 31>;
-		};
-
-		smi0: mdio@1180000001800 {
-			compatible = "cavium,octeon-3860-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x11800 0x00001800 0x0 0x40>;
-
-			phy0: ethernet-phy@0 {
-				compatible = "marvell,88e1118";
-				marvell,reg-init =
-					/* Fix rx and tx clock transition timing */
-					<2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
-					/* Adjust LED drive. */
-					<3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
-					/* irq, blink-activity, blink-link */
-					<3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
-				reg = <0>;
-			};
-
-			phy1: ethernet-phy@1 {
-				compatible = "marvell,88e1118";
-				marvell,reg-init =
-					/* Fix rx and tx clock transition timing */
-					<2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
-					/* Adjust LED drive. */
-					<3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
-					/* irq, blink-activity, blink-link */
-					<3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
-				reg = <1>;
-			};
-
-			phy2: ethernet-phy@2 {
-				reg = <2>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy3: ethernet-phy@3 {
-				reg = <3>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <4>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy5: ethernet-phy@5 {
-				reg = <5>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-
-			phy6: ethernet-phy@6 {
-				reg = <6>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy7: ethernet-phy@7 {
-				reg = <7>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy8: ethernet-phy@8 {
-				reg = <8>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy9: ethernet-phy@9 {
-				reg = <9>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-		};
-
-		smi1: mdio@1180000001900 {
-			compatible = "cavium,octeon-3860-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x11800 0x00001900 0x0 0x40>;
-
-			phy100: ethernet-phy@1 {
-				reg = <1>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy101: ethernet-phy@2 {
-				reg = <2>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy102: ethernet-phy@3 {
-				reg = <3>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-			phy103: ethernet-phy@4 {
-				reg = <4>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-				interrupt-parent = <&gpio>;
-				interrupts = <12 8>; /* Pin 12, active low */
-			};
-		};
-
-		mix0: ethernet@1070000100000 {
-			compatible = "cavium,octeon-5750-mix";
-			reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
-			      <0x11800 0xE0000000 0x0 0x300>, /* AGL */
-			      <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED  */
-			      <0x11800 0xE0002000 0x0 0x8>;   /* AGL_PRT_CTL */
-			cell-index = <0>;
-			interrupts = <0 62>, <1 46>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			phy-handle = <&phy0>;
-		};
-
-		mix1: ethernet@1070000100800 {
-			compatible = "cavium,octeon-5750-mix";
-			reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
-			      <0x11800 0xE0000800 0x0 0x300>, /* AGL */
-			      <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED  */
-			      <0x11800 0xE0002008 0x0 0x8>;   /* AGL_PRT_CTL */
-			cell-index = <1>;
-			interrupts = <1 18>, < 1 46>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			phy-handle = <&phy1>;
-		};
-
-		pip: pip@11800a0000000 {
-			compatible = "cavium,octeon-3860-pip";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x11800 0xa0000000 0x0 0x2000>;
-
-			interface@0 {
-				compatible = "cavium,octeon-3860-pip-interface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>; /* interface */
-
-				ethernet@0 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x0>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy2>;
-					cavium,alt-phy-handle = <&phy100>;
-				};
-				ethernet@1 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x1>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy3>;
-					cavium,alt-phy-handle = <&phy101>;
-				};
-				ethernet@2 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x2>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy4>;
-					cavium,alt-phy-handle = <&phy102>;
-				};
-				ethernet@3 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x3>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy5>;
-					cavium,alt-phy-handle = <&phy103>;
-				};
-				ethernet@4 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x4>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@5 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x5>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@6 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x6>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@7 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x7>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@8 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x8>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@9 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x9>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@a {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0xa>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@b {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0xb>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@c {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0xc>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@d {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0xd>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@e {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0xe>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-				ethernet@f {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0xf>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-			};
-
-			interface@1 {
-				compatible = "cavium,octeon-3860-pip-interface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <1>; /* interface */
-
-				ethernet@0 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x0>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy6>;
-				};
-				ethernet@1 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x1>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy7>;
-				};
-				ethernet@2 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x2>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy8>;
-				};
-				ethernet@3 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x3>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy9>;
-				};
-			};
-		};
-
-		twsi0: i2c@1180000001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "cavium,octeon-3860-twsi";
-			reg = <0x11800 0x00001000 0x0 0x200>;
-			interrupts = <0 45>;
-			clock-frequency = <100000>;
-
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-			tmp@4c {
-				compatible = "ti,tmp421";
-				reg = <0x4c>;
-			};
-		};
-
-		twsi1: i2c@1180000001200 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "cavium,octeon-3860-twsi";
-			reg = <0x11800 0x00001200 0x0 0x200>;
-			interrupts = <0 59>;
-			clock-frequency = <100000>;
-		};
-
-		uart0: serial@1180000000800 {
-			compatible = "cavium,octeon-3860-uart","ns16550";
-			reg = <0x11800 0x00000800 0x0 0x400>;
-			clock-frequency = <0>;
-			current-speed = <115200>;
-			reg-shift = <3>;
-			interrupts = <0 34>;
-		};
-
-		uart1: serial@1180000000c00 {
-			compatible = "cavium,octeon-3860-uart","ns16550";
-			reg = <0x11800 0x00000c00 0x0 0x400>;
-			clock-frequency = <0>;
-			current-speed = <115200>;
-			reg-shift = <3>;
-			interrupts = <0 35>;
-		};
-
-		uart2: serial@1180000000400 {
-			compatible = "cavium,octeon-3860-uart","ns16550";
-			reg = <0x11800 0x00000400 0x0 0x400>;
-			clock-frequency = <0>;
-			current-speed = <115200>;
-			reg-shift = <3>;
-			interrupts = <1 16>;
-		};
-
-		bootbus: bootbus@1180000000000 {
-			compatible = "cavium,octeon-3860-bootbus";
-			reg = <0x11800 0x00000000 0x0 0x200>;
-			/* The chip select number and offset */
-			#address-cells = <2>;
-			/* The size of the chip select region */
-			#size-cells = <1>;
-			ranges = <0 0  0x0 0x1f400000  0xc00000>,
-				 <1 0  0x10000 0x30000000  0>,
-				 <2 0  0x10000 0x40000000  0>,
-				 <3 0  0x10000 0x50000000  0>,
-				 <4 0  0x0 0x1d020000  0x10000>,
-				 <5 0  0x0 0x1d040000  0x10000>,
-				 <6 0  0x0 0x1d050000  0x10000>,
-				 <7 0  0x10000 0x90000000  0>;
-
-			cavium,cs-config@0 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <0>;
-				cavium,t-adr  = <20>;
-				cavium,t-ce   = <60>;
-				cavium,t-oe   = <60>;
-				cavium,t-we   = <45>;
-				cavium,t-rd-hld = <35>;
-				cavium,t-wr-hld = <45>;
-				cavium,t-pause	= <0>;
-				cavium,t-wait	= <0>;
-				cavium,t-page	= <35>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,bus-width = <8>;
-			};
-			cavium,cs-config@4 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <4>;
-				cavium,t-adr  = <320>;
-				cavium,t-ce   = <320>;
-				cavium,t-oe   = <320>;
-				cavium,t-we   = <320>;
-				cavium,t-rd-hld = <320>;
-				cavium,t-wr-hld = <320>;
-				cavium,t-pause	= <320>;
-				cavium,t-wait	= <320>;
-				cavium,t-page	= <320>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,bus-width = <8>;
-			};
-			cavium,cs-config@5 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <5>;
-				cavium,t-adr  = <5>;
-				cavium,t-ce   = <300>;
-				cavium,t-oe   = <125>;
-				cavium,t-we   = <150>;
-				cavium,t-rd-hld = <100>;
-				cavium,t-wr-hld = <30>;
-				cavium,t-pause	= <0>;
-				cavium,t-wait	= <30>;
-				cavium,t-page	= <320>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,bus-width = <16>;
-			};
-			cavium,cs-config@6 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <6>;
-				cavium,t-adr  = <5>;
-				cavium,t-ce   = <300>;
-				cavium,t-oe   = <270>;
-				cavium,t-we   = <150>;
-				cavium,t-rd-hld = <100>;
-				cavium,t-wr-hld = <70>;
-				cavium,t-pause	= <0>;
-				cavium,t-wait	= <0>;
-				cavium,t-page	= <320>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,wait-mode;
-				cavium,bus-width = <16>;
-			};
-
-			flash0: nor@0,0 {
-				compatible = "cfi-flash";
-				reg = <0 0 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-			};
-
-			led0: led-display@4,0 {
-				compatible = "avago,hdsp-253x";
-				reg = <4 0x20 0x20>, <4 0 0x20>;
-			};
-
-			cf0: compact-flash@5,0 {
-				compatible = "cavium,ebt3000-compact-flash";
-				reg = <5 0 0x10000>, <6 0 0x10000>;
-				cavium,bus-width = <16>;
-				cavium,true-ide;
-				cavium,dma-engine-handle = <&dma0>;
-			};
-		};
-
-		dma0: dma-engine@1180000000100 {
-			compatible = "cavium,octeon-5750-bootbus-dma";
-			reg = <0x11800 0x00000100 0x0 0x8>;
-			interrupts = <0 63>;
-		};
-		dma1: dma-engine@1180000000108 {
-			compatible = "cavium,octeon-5750-bootbus-dma";
-			reg = <0x11800 0x00000108 0x0 0x8>;
-			interrupts = <0 63>;
-		};
-
-		uctl: uctl@118006f000000 {
-			compatible = "cavium,octeon-6335-uctl";
-			reg = <0x11800 0x6f000000 0x0 0x100>;
-			ranges; /* Direct mapping */
-			#address-cells = <2>;
-			#size-cells = <2>;
-			/* 12MHz, 24MHz and 48MHz allowed */
-			refclk-frequency = <12000000>;
-			/* Either "crystal" or "external" */
-			refclk-type = "crystal";
-
-			ehci@16f0000000000 {
-				compatible = "cavium,octeon-6335-ehci","usb-ehci";
-				reg = <0x16f00 0x00000000 0x0 0x100>;
-				interrupts = <0 56>;
-				big-endian-regs;
-			};
-			ohci@16f0000000400 {
-				compatible = "cavium,octeon-6335-ohci","usb-ohci";
-				reg = <0x16f00 0x00000400 0x0 0x100>;
-				interrupts = <0 56>;
-				big-endian-regs;
-			};
-		};
-
-		usbn: usbn@1180068000000 {
-			compatible = "cavium,octeon-5750-usbn";
-			reg = <0x11800 0x68000000 0x0 0x1000>;
-			ranges; /* Direct mapping */
-			#address-cells = <2>;
-			#size-cells = <2>;
-			/* 12MHz, 24MHz and 48MHz allowed */
-			refclk-frequency = <12000000>;
-			/* Either "crystal" or "external" */
-			refclk-type = "crystal";
-
-			usbc@16f0010000000 {
-				compatible = "cavium,octeon-5750-usbc";
-				reg = <0x16f00 0x10000000 0x0 0x80000>;
-				interrupts = <0 56>;
-			};
-		};
-	};
-
-	aliases {
-		mix0 = &mix0;
-		mix1 = &mix1;
-		pip = &pip;
-		smi0 = &smi0;
-		smi1 = &smi1;
-		twsi0 = &twsi0;
-		twsi1 = &twsi1;
-		uart0 = &uart0;
-		uart1 = &uart1;
-		uart2 = &uart2;
-		flash0 = &flash0;
-		cf0 = &cf0;
-		uctl = &uctl;
-		usbn = &usbn;
-		led0 = &led0;
-	};
- };
diff --git a/src/mips/octeon_68xx.dts b/src/mips/octeon_68xx.dts
deleted file mode 100644
index 79b46fcb0a11..000000000000
--- a/src/mips/octeon_68xx.dts
+++ /dev/null
@@ -1,625 +0,0 @@
-/dts-v1/;
-/*
- * OCTEON 68XX device tree skeleton.
- *
- * This device tree is pruned and patched by early boot code before
- * use.	 Because of this, it contains a super-set of the available
- * devices and properties.
- */
-/ {
-	compatible = "cavium,octeon-6880";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&ciu2>;
-
-	soc@0 {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges; /* Direct mapping */
-
-		ciu2: interrupt-controller@1070100000000 {
-			compatible = "cavium,octeon-6880-ciu2";
-			interrupt-controller;
-			/* Interrupts are specified by two parts:
-			 * 1) Controller register (0 or 7)
-			 * 2) Bit within the register (0..63)
-			 */
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x10701 0x00000000 0x0 0x4000000>;
-		};
-
-		gpio: gpio-controller@1070000000800 {
-			#gpio-cells = <2>;
-			compatible = "cavium,octeon-3860-gpio";
-			reg = <0x10700 0x00000800 0x0 0x100>;
-			gpio-controller;
-			/* Interrupts are specified by two parts:
-			 * 1) GPIO pin number (0..15)
-			 * 2) Triggering (1 - edge rising
-			 *		  2 - edge falling
-			 *		  4 - level active high
-			 *		  8 - level active low)
-			 */
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			/* The GPIO pins connect to 16 consecutive CUI bits */
-			interrupts = <7 0>,  <7 1>,  <7 2>,  <7 3>,
-				     <7 4>,  <7 5>,  <7 6>,  <7 7>,
-				     <7 8>,  <7 9>,  <7 10>, <7 11>,
-				     <7 12>, <7 13>, <7 14>, <7 15>;
-		};
-
-		smi0: mdio@1180000003800 {
-			compatible = "cavium,octeon-3860-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x11800 0x00003800 0x0 0x40>;
-
-			phy0: ethernet-phy@6 {
-				compatible = "marvell,88e1118";
-				marvell,reg-init =
-					/* Fix rx and tx clock transition timing */
-					<2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
-					/* Adjust LED drive. */
-					<3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
-					/* irq, blink-activity, blink-link */
-					<3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
-				reg = <6>;
-			};
-
-			phy1: ethernet-phy@1 {
-				cavium,qlm-trim = "4,sgmii";
-				reg = <1>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy2: ethernet-phy@2 {
-				cavium,qlm-trim = "4,sgmii";
-				reg = <2>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy3: ethernet-phy@3 {
-				cavium,qlm-trim = "4,sgmii";
-				reg = <3>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy4: ethernet-phy@4 {
-				cavium,qlm-trim = "4,sgmii";
-				reg = <4>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-		};
-
-		smi1: mdio@1180000003880 {
-			compatible = "cavium,octeon-3860-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x11800 0x00003880 0x0 0x40>;
-
-			phy41: ethernet-phy@1 {
-				cavium,qlm-trim = "0,sgmii";
-				reg = <1>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy42: ethernet-phy@2 {
-				cavium,qlm-trim = "0,sgmii";
-				reg = <2>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy43: ethernet-phy@3 {
-				cavium,qlm-trim = "0,sgmii";
-				reg = <3>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy44: ethernet-phy@4 {
-				cavium,qlm-trim = "0,sgmii";
-				reg = <4>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-		};
-
-		smi2: mdio@1180000003900 {
-			compatible = "cavium,octeon-3860-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x11800 0x00003900 0x0 0x40>;
-
-			phy21: ethernet-phy@1 {
-				cavium,qlm-trim = "2,sgmii";
-				reg = <1>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy22: ethernet-phy@2 {
-				cavium,qlm-trim = "2,sgmii";
-				reg = <2>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy23: ethernet-phy@3 {
-				cavium,qlm-trim = "2,sgmii";
-				reg = <3>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy24: ethernet-phy@4 {
-				cavium,qlm-trim = "2,sgmii";
-				reg = <4>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-		};
-
-		smi3: mdio@1180000003980 {
-			compatible = "cavium,octeon-3860-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x11800 0x00003980 0x0 0x40>;
-
-			phy11: ethernet-phy@1 {
-				cavium,qlm-trim = "3,sgmii";
-				reg = <1>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy12: ethernet-phy@2 {
-				cavium,qlm-trim = "3,sgmii";
-				reg = <2>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy13: ethernet-phy@3 {
-				cavium,qlm-trim = "3,sgmii";
-				reg = <3>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-			phy14: ethernet-phy@4 {
-				cavium,qlm-trim = "3,sgmii";
-				reg = <4>;
-				compatible = "marvell,88e1149r";
-				marvell,reg-init = <3 0x10 0 0x5777>,
-					<3 0x11 0 0x00aa>,
-					<3 0x12 0 0x4105>,
-					<3 0x13 0 0x0a60>;
-			};
-		};
-
-		mix0: ethernet@1070000100000 {
-			compatible = "cavium,octeon-5750-mix";
-			reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
-			      <0x11800 0xE0000000 0x0 0x300>, /* AGL */
-			      <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED  */
-			      <0x11800 0xE0002000 0x0 0x8>;   /* AGL_PRT_CTL */
-			cell-index = <0>;
-			interrupts = <6 40>, <6 32>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			phy-handle = <&phy0>;
-		};
-
-		pip: pip@11800a0000000 {
-			compatible = "cavium,octeon-3860-pip";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x11800 0xa0000000 0x0 0x2000>;
-
-			interface@4 {
-				compatible = "cavium,octeon-3860-pip-interface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x4>; /* interface */
-
-				ethernet@0 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x0>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy1>;
-				};
-				ethernet@1 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x1>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy2>;
-				};
-				ethernet@2 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x2>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy3>;
-				};
-				ethernet@3 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x3>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy4>;
-				};
-			};
-
-			interface@3 {
-				compatible = "cavium,octeon-3860-pip-interface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x3>; /* interface */
-
-				ethernet@0 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x0>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy11>;
-				};
-				ethernet@1 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x1>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy12>;
-				};
-				ethernet@2 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x2>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy13>;
-				};
-				ethernet@3 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x3>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy14>;
-				};
-			};
-
-			interface@2 {
-				compatible = "cavium,octeon-3860-pip-interface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x2>; /* interface */
-
-				ethernet@0 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x0>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy21>;
-				};
-				ethernet@1 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x1>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy22>;
-				};
-				ethernet@2 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x2>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy23>;
-				};
-				ethernet@3 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x3>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy24>;
-				};
-			};
-
-			interface@1 {
-				compatible = "cavium,octeon-3860-pip-interface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x1>; /* interface */
-
-				ethernet@0 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x0>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-				};
-			};
-
-			interface@0 {
-				compatible = "cavium,octeon-3860-pip-interface";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x0>; /* interface */
-
-				ethernet@0 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x0>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy41>;
-				};
-				ethernet@1 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x1>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy42>;
-				};
-				ethernet@2 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x2>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy43>;
-				};
-				ethernet@3 {
-					compatible = "cavium,octeon-3860-pip-port";
-					reg = <0x3>; /* Port */
-					local-mac-address = [ 00 00 00 00 00 00 ];
-					phy-handle = <&phy44>;
-				};
-			};
-		};
-
-		twsi0: i2c@1180000001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "cavium,octeon-3860-twsi";
-			reg = <0x11800 0x00001000 0x0 0x200>;
-			interrupts = <3 32>;
-			clock-frequency = <100000>;
-
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-			tmp@4c {
-				compatible = "ti,tmp421";
-				reg = <0x4c>;
-			};
-		};
-
-		twsi1: i2c@1180000001200 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "cavium,octeon-3860-twsi";
-			reg = <0x11800 0x00001200 0x0 0x200>;
-			interrupts = <3 33>;
-			clock-frequency = <100000>;
-		};
-
-		uart0: serial@1180000000800 {
-			compatible = "cavium,octeon-3860-uart","ns16550";
-			reg = <0x11800 0x00000800 0x0 0x400>;
-			clock-frequency = <0>;
-			current-speed = <115200>;
-			reg-shift = <3>;
-			interrupts = <3 36>;
-		};
-
-		uart1: serial@1180000000c00 {
-			compatible = "cavium,octeon-3860-uart","ns16550";
-			reg = <0x11800 0x00000c00 0x0 0x400>;
-			clock-frequency = <0>;
-			current-speed = <115200>;
-			reg-shift = <3>;
-			interrupts = <3 37>;
-		};
-
-		bootbus: bootbus@1180000000000 {
-			compatible = "cavium,octeon-3860-bootbus";
-			reg = <0x11800 0x00000000 0x0 0x200>;
-			/* The chip select number and offset */
-			#address-cells = <2>;
-			/* The size of the chip select region */
-			#size-cells = <1>;
-			ranges = <0 0  0       0x1f400000  0xc00000>,
-				 <1 0  0x10000 0x30000000  0>,
-				 <2 0  0x10000 0x40000000  0>,
-				 <3 0  0x10000 0x50000000  0>,
-				 <4 0  0       0x1d020000  0x10000>,
-				 <5 0  0       0x1d040000  0x10000>,
-				 <6 0  0       0x1d050000  0x10000>,
-				 <7 0  0x10000 0x90000000  0>;
-
-			cavium,cs-config@0 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <0>;
-				cavium,t-adr  = <10>;
-				cavium,t-ce   = <50>;
-				cavium,t-oe   = <50>;
-				cavium,t-we   = <35>;
-				cavium,t-rd-hld = <25>;
-				cavium,t-wr-hld = <35>;
-				cavium,t-pause	= <0>;
-				cavium,t-wait	= <300>;
-				cavium,t-page	= <25>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,bus-width = <8>;
-			};
-			cavium,cs-config@4 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <4>;
-				cavium,t-adr  = <320>;
-				cavium,t-ce   = <320>;
-				cavium,t-oe   = <320>;
-				cavium,t-we   = <320>;
-				cavium,t-rd-hld = <320>;
-				cavium,t-wr-hld = <320>;
-				cavium,t-pause	= <320>;
-				cavium,t-wait	= <320>;
-				cavium,t-page	= <320>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,bus-width = <8>;
-			};
-			cavium,cs-config@5 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <5>;
-				cavium,t-adr  = <0>;
-				cavium,t-ce   = <300>;
-				cavium,t-oe   = <125>;
-				cavium,t-we   = <150>;
-				cavium,t-rd-hld = <100>;
-				cavium,t-wr-hld = <300>;
-				cavium,t-pause	= <0>;
-				cavium,t-wait	= <300>;
-				cavium,t-page	= <310>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,bus-width = <16>;
-			};
-			cavium,cs-config@6 {
-				compatible = "cavium,octeon-3860-bootbus-config";
-				cavium,cs-index = <6>;
-				cavium,t-adr  = <0>;
-				cavium,t-ce   = <30>;
-				cavium,t-oe   = <125>;
-				cavium,t-we   = <150>;
-				cavium,t-rd-hld = <100>;
-				cavium,t-wr-hld = <30>;
-				cavium,t-pause	= <0>;
-				cavium,t-wait	= <30>;
-				cavium,t-page	= <310>;
-				cavium,t-rd-dly = <0>;
-
-				cavium,pages	 = <0>;
-				cavium,wait-mode;
-				cavium,bus-width = <16>;
-			};
-
-			flash0: nor@0,0 {
-				compatible = "cfi-flash";
-				reg = <0 0 0x800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "bootloader";
-					reg = <0 0x200000>;
-					read-only;
-				};
-				partition@200000 {
-					label = "kernel";
-					reg = <0x200000 0x200000>;
-				};
-				partition@400000 {
-					label = "cramfs";
-					reg = <0x400000 0x3fe000>;
-				};
-				partition@7fe000 {
-					label = "environment";
-					reg = <0x7fe000 0x2000>;
-					read-only;
-				};
-			};
-
-			led0: led-display@4,0 {
-				compatible = "avago,hdsp-253x";
-				reg = <4 0x20 0x20>, <4 0 0x20>;
-			};
-
-			compact-flash@5,0 {
-				compatible = "cavium,ebt3000-compact-flash";
-				reg = <5 0 0x10000>, <6 0 0x10000>;
-				cavium,bus-width = <16>;
-				cavium,true-ide;
-				cavium,dma-engine-handle = <&dma0>;
-			};
-		};
-
-		dma0: dma-engine@1180000000100 {
-			compatible = "cavium,octeon-5750-bootbus-dma";
-			reg = <0x11800 0x00000100 0x0 0x8>;
-			interrupts = <0 63>;
-		};
-		dma1: dma-engine@1180000000108 {
-			compatible = "cavium,octeon-5750-bootbus-dma";
-			reg = <0x11800 0x00000108 0x0 0x8>;
-			interrupts = <0 63>;
-		};
-
-		uctl: uctl@118006f000000 {
-			compatible = "cavium,octeon-6335-uctl";
-			reg = <0x11800 0x6f000000 0x0 0x100>;
-			ranges; /* Direct mapping */
-			#address-cells = <2>;
-			#size-cells = <2>;
-			/* 12MHz, 24MHz and 48MHz allowed */
-			refclk-frequency = <12000000>;
-			/* Either "crystal" or "external" */
-			refclk-type = "crystal";
-
-			ehci@16f0000000000 {
-				compatible = "cavium,octeon-6335-ehci","usb-ehci";
-				reg = <0x16f00 0x00000000 0x0 0x100>;
-				interrupts = <3 44>;
-				big-endian-regs;
-			};
-			ohci@16f0000000400 {
-				compatible = "cavium,octeon-6335-ohci","usb-ohci";
-				reg = <0x16f00 0x00000400 0x0 0x100>;
-				interrupts = <3 44>;
-				big-endian-regs;
-			};
-		};
-	};
-
-	aliases {
-		mix0 = &mix0;
-		pip = &pip;
-		smi0 = &smi0;
-		smi1 = &smi1;
-		smi2 = &smi2;
-		smi3 = &smi3;
-		twsi0 = &twsi0;
-		twsi1 = &twsi1;
-		uart0 = &uart0;
-		uart1 = &uart1;
-		uctl = &uctl;
-		led0 = &led0;
-		flash0 = &flash0;
-	};
- };
diff --git a/src/mips/rt2880.dtsi b/src/mips/rt2880.dtsi
deleted file mode 100644
index 182afde2f2e1..000000000000
--- a/src/mips/rt2880.dtsi
+++ /dev/null
@@ -1,58 +0,0 @@
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "ralink,rt2880-soc";
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips4KEc";
-		};
-	};
-
-	cpuintc: cpuintc@0 {
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		compatible = "mti,cpu-interrupt-controller";
-	};
-
-	palmbus@300000 {
-		compatible = "palmbus";
-		reg = <0x300000 0x200000>;
-                ranges = <0x0 0x300000 0x1FFFFF>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysc@0 {
-			compatible = "ralink,rt2880-sysc";
-			reg = <0x0 0x100>;
-		};
-
-		intc: intc@200 {
-			compatible = "ralink,rt2880-intc";
-			reg = <0x200 0x100>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>;
-		};
-
-		memc@300 {
-			compatible = "ralink,rt2880-memc";
-			reg = <0x300 0x100>;
-		};
-
-		uartlite@c00 {
-			compatible = "ralink,rt2880-uart", "ns16550a";
-			reg = <0xc00 0x100>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <8>;
-
-			reg-shift = <2>;
-		};
-	};
-};
diff --git a/src/mips/rt2880_eval.dts b/src/mips/rt2880_eval.dts
deleted file mode 100644
index 0a685db093d4..000000000000
--- a/src/mips/rt2880_eval.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-/dts-v1/;
-
-/include/ "rt2880.dtsi"
-
-/ {
-	compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
-	model = "Ralink RT2880 evaluation board";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x8000000 0x2000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	cfi@1f000000 {
-		compatible = "cfi-flash";
-		reg = <0x1f000000 0x400000>;
-
-		bank-width = <2>;
-		device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "uboot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-		partition@30000 {
-			label = "uboot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "calibration";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-		partition@50000 {
-			label = "linux";
-			reg = <0x50000 0x3b0000>;
-		};
-	};
-};
diff --git a/src/mips/rt3050.dtsi b/src/mips/rt3050.dtsi
deleted file mode 100644
index e3203d414fee..000000000000
--- a/src/mips/rt3050.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips24KEc";
-		};
-	};
-
-	cpuintc: cpuintc@0 {
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		compatible = "mti,cpu-interrupt-controller";
-	};
-
-	palmbus@10000000 {
-		compatible = "palmbus";
-		reg = <0x10000000 0x200000>;
-		ranges = <0x0 0x10000000 0x1FFFFF>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysc@0 {
-			compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
-			reg = <0x0 0x100>;
-		};
-
-		intc: intc@200 {
-			compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
-			reg = <0x200 0x100>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>;
-		};
-
-		memc@300 {
-			compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
-			reg = <0x300 0x100>;
-		};
-
-		uartlite@c00 {
-			compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
-			reg = <0xc00 0x100>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <12>;
-
-			reg-shift = <2>;
-		};
-	};
-
-	usb@101c0000 {
-		compatible = "ralink,rt3050-usb", "snps,dwc2";
-		reg = <0x101c0000 40000>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <18>;
-
-		status = "disabled";
-	};
-};
diff --git a/src/mips/rt3052_eval.dts b/src/mips/rt3052_eval.dts
deleted file mode 100644
index ec9e9a035541..000000000000
--- a/src/mips/rt3052_eval.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/dts-v1/;
-
-#include "rt3050.dtsi"
-
-/ {
-	compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
-	model = "Ralink RT3052 evaluation board";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	cfi@1f000000 {
-		compatible = "cfi-flash";
-		reg = <0x1f000000 0x800000>;
-
-		bank-width = <2>;
-		device-width = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "uboot";
-			reg = <0x0 0x30000>;
-			read-only;
-		};
-		partition@30000 {
-			label = "uboot-env";
-			reg = <0x30000 0x10000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "calibration";
-			reg = <0x40000 0x10000>;
-			read-only;
-		};
-		partition@50000 {
-			label = "linux";
-			reg = <0x50000 0x7b0000>;
-		};
-	};
-
-	usb@101c0000 {
-		status = "ok";
-	};
-};
diff --git a/src/mips/rt3883.dtsi b/src/mips/rt3883.dtsi
deleted file mode 100644
index 3b131dd0d5ac..000000000000
--- a/src/mips/rt3883.dtsi
+++ /dev/null
@@ -1,58 +0,0 @@
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "ralink,rt3883-soc";
-
-	cpus {
-		cpu@0 {
-			compatible = "mips,mips74Kc";
-		};
-	};
-
-	cpuintc: cpuintc@0 {
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		compatible = "mti,cpu-interrupt-controller";
-	};
-
-	palmbus@10000000 {
-		compatible = "palmbus";
-		reg = <0x10000000 0x200000>;
-		ranges = <0x0 0x10000000 0x1FFFFF>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysc@0 {
-			compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
-			reg = <0x0 0x100>;
-		};
-
-		intc: intc@200 {
-			compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
-			reg = <0x200 0x100>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>;
-		};
-
-		memc@300 {
-			compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
-			reg = <0x300 0x100>;
-		};
-
-		uartlite@c00 {
-			compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
-			reg = <0xc00 0x100>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <12>;
-
-			reg-shift = <2>;
-		};
-	};
-};
diff --git a/src/mips/rt3883_eval.dts b/src/mips/rt3883_eval.dts
deleted file mode 100644
index e8df21a5d10d..000000000000
--- a/src/mips/rt3883_eval.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-/dts-v1/;
-
-/include/ "rt3883.dtsi"
-
-/ {
-	compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc";
-	model = "Ralink RT3883 evaluation board";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-};
diff --git a/src/mips/sead3.dts b/src/mips/sead3.dts
deleted file mode 100644
index e4b317d414f1..000000000000
--- a/src/mips/sead3.dts
+++ /dev/null
@@ -1,22 +0,0 @@
-/dts-v1/;
-
-/memreserve/ 0x00000000 0x00001000;	// reserved
-/memreserve/ 0x00001000 0x000ef000;	// ROM data
-/memreserve/ 0x000f0000 0x004cc000;	// reserved
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "mti,sead-3";
-
-	cpus {
-		cpu@0 {
-			compatible = "mti,mips14KEc", "mti,mips14Kc";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-};
diff --git a/src/mips/xlp_evp.dts b/src/mips/xlp_evp.dts
deleted file mode 100644
index 89ad04808c02..000000000000
--- a/src/mips/xlp_evp.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * XLP8XX Device Tree Source for EVP boards
- */
-
-/dts-v1/;
-/ {
-	model = "netlogic,XLP-EVP";
-	compatible = "netlogic,xlp";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
-			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
-
-		serial0: serial@30000 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0 0x30100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <133333333>;
-			interrupt-parent = <&pic>;
-			interrupts = <17>;
-		};
-		serial1: serial@31000 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0 0x31100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <133333333>;
-			interrupt-parent = <&pic>;
-			interrupts = <18>;
-		};
-		i2c0: ocores@32000 {
-			compatible = "opencores,i2c-ocores";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0x32100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <32000000>;
-			interrupt-parent = <&pic>;
-			interrupts = <30>;
-		};
-		i2c1: ocores@33000 {
-			compatible = "opencores,i2c-ocores";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0x33100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <32000000>;
-			interrupt-parent = <&pic>;
-			interrupts = <31>;
-
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-
-			dtt@4c {
-				compatible = "national,lm90";
-				reg = <0x4c>;
-			};
-		};
-		pic: pic@4000 {
-			compatible = "netlogic,xlp-pic";
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			reg = <0 0x4000 0x200>;
-			interrupt-controller;
-		};
-
-		nor_flash@1,0 {
-			compatible = "cfi-flash";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			reg = <1 0 0x1000000>;
-
-			partition@0 {
-				label = "x-loader";
-				reg = <0x0 0x100000>; /* 1M */
-				read-only;
-			};
-
-			partition@100000 {
-				label = "u-boot";
-				reg = <0x100000 0x100000>; /* 1M */
-			};
-
-			partition@200000 {
-				label = "kernel";
-				reg = <0x200000 0x500000>; /* 5M */
-			};
-
-			partition@700000 {
-				label = "rootfs";
-				reg = <0x700000 0x800000>; /* 8M */
-			};
-
-			partition@f00000 {
-				label = "env";
-				reg = <0xf00000 0x100000>; /* 1M */
-				read-only;
-			};
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
-	};
-};
diff --git a/src/mips/xlp_fvp.dts b/src/mips/xlp_fvp.dts
deleted file mode 100644
index 63e62b7bd758..000000000000
--- a/src/mips/xlp_fvp.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * XLP2XX Device Tree Source for FVP boards
- */
-
-/dts-v1/;
-/ {
-	model = "netlogic,XLP-FVP";
-	compatible = "netlogic,xlp";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
-			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
-
-		serial0: serial@30000 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0 0x30100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <133333333>;
-			interrupt-parent = <&pic>;
-			interrupts = <17>;
-		};
-		serial1: serial@31000 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0 0x31100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <133333333>;
-			interrupt-parent = <&pic>;
-			interrupts = <18>;
-		};
-		i2c0: ocores@37100 {
-			compatible = "opencores,i2c-ocores";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0x37100 0x20>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <32000000>;
-			interrupt-parent = <&pic>;
-			interrupts = <30>;
-		};
-		i2c1: ocores@37120 {
-			compatible = "opencores,i2c-ocores";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0x37120 0x20>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <32000000>;
-			interrupt-parent = <&pic>;
-			interrupts = <31>;
-
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-
-			dtt@4c {
-				compatible = "national,lm90";
-				reg = <0x4c>;
-			};
-		};
-		pic: pic@4000 {
-			compatible = "netlogic,xlp-pic";
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			reg = <0 0x4000 0x200>;
-			interrupt-controller;
-		};
-
-		nor_flash@1,0 {
-			compatible = "cfi-flash";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			reg = <1 0 0x1000000>;
-
-			partition@0 {
-				label = "x-loader";
-				reg = <0x0 0x100000>; /* 1M */
-				read-only;
-			};
-
-			partition@100000 {
-				label = "u-boot";
-				reg = <0x100000 0x100000>; /* 1M */
-			};
-
-			partition@200000 {
-				label = "kernel";
-				reg = <0x200000 0x500000>; /* 5M */
-			};
-
-			partition@700000 {
-				label = "rootfs";
-				reg = <0x700000 0x800000>; /* 8M */
-			};
-
-			partition@f00000 {
-				label = "env";
-				reg = <0xf00000 0x100000>; /* 1M */
-				read-only;
-			};
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
-	};
-};
diff --git a/src/mips/xlp_gvp.dts b/src/mips/xlp_gvp.dts
deleted file mode 100644
index bb4ecd1d47fc..000000000000
--- a/src/mips/xlp_gvp.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * XLP9XX Device Tree Source for GVP boards
- */
-
-/dts-v1/;
-/ {
-	model = "netlogic,XLP-GVP";
-	compatible = "netlogic,xlp";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
-			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
-
-		serial0: serial@30000 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0 0x112100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <125000000>;
-			interrupt-parent = <&pic>;
-			interrupts = <17>;
-		};
-		pic: pic@110000 {
-			compatible = "netlogic,xlp-pic";
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			reg = <0 0x110000 0x200>;
-			interrupt-controller;
-		};
-
-		nor_flash@1,0 {
-			compatible = "cfi-flash";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			reg = <1 0 0x1000000>;
-
-			partition@0 {
-				label = "x-loader";
-				reg = <0x0 0x100000>; /* 1M */
-				read-only;
-			};
-
-			partition@100000 {
-				label = "u-boot";
-				reg = <0x100000 0x100000>; /* 1M */
-			};
-
-			partition@200000 {
-				label = "kernel";
-				reg = <0x200000 0x500000>; /* 5M */
-			};
-
-			partition@700000 {
-				label = "rootfs";
-				reg = <0x700000 0x800000>; /* 8M */
-			};
-
-			partition@f00000 {
-				label = "env";
-				reg = <0xf00000 0x100000>; /* 1M */
-				read-only;
-			};
-		};
-
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
-	};
-};
diff --git a/src/mips/xlp_svp.dts b/src/mips/xlp_svp.dts
deleted file mode 100644
index 1ebd00edaacc..000000000000
--- a/src/mips/xlp_svp.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * XLP3XX Device Tree Source for SVP boards
- */
-
-/dts-v1/;
-/ {
-	model = "netlogic,XLP-SVP";
-	compatible = "netlogic,xlp";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	soc {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
-			  1 0  0 0x16000000  0x02000000>; // GBU chipselects
-
-		serial0: serial@30000 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0 0x30100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <133333333>;
-			interrupt-parent = <&pic>;
-			interrupts = <17>;
-		};
-		serial1: serial@31000 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0 0x31100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <133333333>;
-			interrupt-parent = <&pic>;
-			interrupts = <18>;
-		};
-		i2c0: ocores@32000 {
-			compatible = "opencores,i2c-ocores";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0x32100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <32000000>;
-			interrupt-parent = <&pic>;
-			interrupts = <30>;
-		};
-		i2c1: ocores@33000 {
-			compatible = "opencores,i2c-ocores";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0 0x33100 0xa00>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clock-frequency = <32000000>;
-			interrupt-parent = <&pic>;
-			interrupts = <31>;
-
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-
-			dtt@4c {
-				compatible = "national,lm90";
-				reg = <0x4c>;
-			};
-		};
-		pic: pic@4000 {
-			compatible = "netlogic,xlp-pic";
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			reg = <0 0x4000 0x200>;
-			interrupt-controller;
-		};
-
-		nor_flash@1,0 {
-			compatible = "cfi-flash";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			reg = <1 0 0x1000000>;
-
-			partition@0 {
-				label = "x-loader";
-				reg = <0x0 0x100000>; /* 1M */
-				read-only;
-			};
-
-			partition@100000 {
-				label = "u-boot";
-				reg = <0x100000 0x100000>; /* 1M */
-			};
-
-			partition@200000 {
-				label = "kernel";
-				reg = <0x200000 0x500000>; /* 5M */
-			};
-
-			partition@700000 {
-				label = "rootfs";
-				reg = <0x700000 0x800000>; /* 8M */
-			};
-
-			partition@f00000 {
-				label = "env";
-				reg = <0xf00000 0x100000>; /* 1M */
-				read-only;
-			};
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
-	};
-};
diff --git a/src/openrisc/or1ksim.dts b/src/openrisc/or1ksim.dts
deleted file mode 100644
index 5d4f9027afaf..000000000000
--- a/src/openrisc/or1ksim.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/dts-v1/;
-/ {
-	compatible = "opencores,or1ksim";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&pic>;
-
-	chosen {
-		bootargs = "console=uart,mmio,0x90000000,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x02000000>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "opencores,or1200-rtlsvn481";
-			reg = <0>;
-			clock-frequency = <20000000>;
-		};
-	};
-
-	/*
-	 * OR1K PIC is built into CPU and accessed via special purpose
-	 * registers.  It is not addressable and, hence, has no 'reg'
-	 * property.
-	 */
-	pic: pic {
-		compatible = "opencores,or1k-pic";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
-
-	serial0: serial@90000000 {
-		compatible = "opencores,uart16550-rtlsvn105", "ns16550a";
-		reg = <0x90000000 0x100>;
-		interrupts = <2>;
-		clock-frequency = <20000000>;
-	};
-
-	enet0: ethoc@92000000 {
-		compatible = "opencores,ethmac-rtlsvn338";
-		reg = <0x92000000 0x100>;
-		interrupts = <4>;
-	};
-};
diff --git a/src/powerpc/a3m071.dts b/src/powerpc/a3m071.dts
deleted file mode 100644
index bf81b8f9704c..000000000000
--- a/src/powerpc/a3m071.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * a3m071 board Device Tree Source
- *
- * Copyright 2012 Stefan Roese <sr@denx.de>
- *
- * Copyright (C) 2011 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * Copyright (C) 2007 Semihalf
- * Marian Balakowicz <m8@semihalf.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 { fsl,has-wdt; };
-
-/ {
-	model = "anonymous,a3m071";
-	compatible = "anonymous,a3m071";
-
-	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>; /* From boot loader */
-		system-frequency = <0>; /* From boot loader */
-
-		spi@f00 {
-			status = "disabled";
-		};
-
-		usb: usb@1000 {
-			status = "disabled";
-		};
-
-		psc@2000 {
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
-		};
-
-		psc@2200 {
-			status = "disabled";
-		};
-
-		psc@2400 {
-			status = "disabled";
-		};
-
-		psc@2600 {
-			status = "disabled";
-		};
-
-		psc@2800 {
-			status = "disabled";
-		};
-
-		psc@2c00 {		// PSC6
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@3 {
-				reg = <0x03>;
-			};
-		};
-
-		ata@3a00 {
-			status = "disabled";
-		};
-
-		i2c@3d00 {
-			status = "disabled";
-		};
-
-		i2c@3d40 {
-			status = "disabled";
-		};
-	};
-
-	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xfc000000 0x02000000
-			  3 0 0xe9000000 0x00080000
-			  5 0 0xe8000000 0x00010000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0x0 0x02000000>;
-			compatible = "cfi-flash";
-			bank-width = <2>;
-			partition@0x0 {
-				label = "u-boot";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@0x00040000 {
-				label = "env";
-				reg = <0x00040000 0x00020000>;
-			};
-			partition@0x00060000 {
-				label = "dtb";
-				reg = <0x00060000 0x00020000>;
-			};
-			partition@0x00080000 {
-				label = "kernel";
-				reg = <0x00080000 0x00500000>;
-			};
-			partition@0x00580000 {
-				label = "root";
-				reg = <0x00580000 0x00A80000>;
-			};
-		};
-
-		fpga@3,0 {
-			compatible = "anonymous,a3m071-fpga";
-			reg = <3 0x0 0x00080000
-			       5 0x0 0x00010000>;
-			interrupts = <0 0 3>;  /* level low */
-		};
-	};
-
-	pci@f0000d00 {
-		status = "disabled";
-	};
-};
diff --git a/src/powerpc/a4m072.dts b/src/powerpc/a4m072.dts
deleted file mode 100644
index 1f02034c7e99..000000000000
--- a/src/powerpc/a4m072.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * a4m072 board Device Tree Source
- *
- * Copyright (C) 2011 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * Copyright (C) 2007 Semihalf
- * Marian Balakowicz <m8@semihalf.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 { fsl,has-wdt; };
-&gpt3 { gpio-controller; };
-&gpt4 { gpio-controller; };
-&gpt5 { gpio-controller; };
-
-/ {
-	model = "anonymous,a4m072";
-	compatible = "anonymous,a4m072";
-
-	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>; /* From boot loader */
-		system-frequency = <0>; /* From boot loader */
-
-		cdm@200 {
-			fsl,init-ext-48mhz-en = <0x0>;
-			fsl,init-fd-enable = <0x01>;
-			fsl,init-fd-counters = <0x3333>;
-		};
-
-		spi@f00 {
-			status = "disabled";
-		};
-
-		psc@2000 {
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
-		};
-
-		psc@2200 {
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
-		};
-
-		psc@2400 {
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
-		};
-
-		psc@2600 {
-			status = "disabled";
-		};
-
-		psc@2800 {
-			status = "disabled";
-		};
-
-		psc@2c00 {
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@1f {
-				reg = <0x1f>;
-				interrupts = <1 2 0>; /* IRQ 2 active low */
-			};
-		};
-
-		i2c@3d00 {
-			status = "disabled";
-		};
-
-		i2c@3d40 {
-			hwmon@2e {
-				compatible = "nsc,lm87";
-				reg = <0x2e>;
-			};
-			rtc@51 {
-				compatible = "nxp,rtc8564";
-				reg = <0x51>;
-			};
-		};
-	};
-
-	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xfe000000 0x02000000
-			  1 0 0x62000000 0x00400000
-			  2 0 0x64000000 0x00200000
-			  3 0 0x66000000 0x01000000
-			  6 0 0x68000000 0x01000000
-			  7 0 0x6a000000 0x00000004>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-		};
-		sram0@1,0 {
-			compatible = "mtd-ram";
-			reg = <1 0x00000 0x00400000>;
-			bank-width = <2>;
-		};
-	};
-
-	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-				 /* IDSEL 0x16 */
-				 0xc000 0 0 1 &mpc5200_pic 1 3 3
-				 0xc000 0 0 2 &mpc5200_pic 1 3 3
-				 0xc000 0 0 3 &mpc5200_pic 1 3 3
-				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
-		clock-frequency = <0>; /* From boot loader */
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
-	};
-};
diff --git a/src/powerpc/ac14xx.dts b/src/powerpc/ac14xx.dts
deleted file mode 100644
index a1b883730b31..000000000000
--- a/src/powerpc/ac14xx.dts
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- * Device Tree Source for the MPC5121e based ac14xx board
- *
- * Copyright 2012 Anatolij Gustschin <agust@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-
-#include <mpc5121.dtsi>
-
-/ {
-	model = "ac14xx";
-	compatible = "ifm,ac14xx", "fsl,mpc5121";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial7;
-		spi4 = &spi4;
-		spi5 = &spi5;
-	};
-
-	cpus {
-		PowerPC,5121@0 {
-			timebase-frequency = <40000000>;	/*  40 MHz (csb/4) */
-			bus-frequency = <160000000>;		/* 160 MHz csb bus */
-			clock-frequency = <400000000>;		/* 400 MHz ppc core */
-		};
-	};
-
-	memory {
-		reg = <0x00000000 0x10000000>;			/* 256MB at 0 */
-	};
-
-	nfc@40000000 {
-		status = "disabled";
-	};
-
-	localbus@80000020 {
-		ranges = <0x0 0x0 0xfc000000 0x04000000	/* CS0: NOR flash */
-			  0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */
-			  0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */
-			  0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */
-			  0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */
-			  0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0x00000000 0x04000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			device-width = <2>;
-
-			partition@0 {
-				label = "dtb-kernel-production";
-				reg = <0x00000000 0x00400000>;
-			};
-			partition@1 {
-				label = "filesystem-production";
-				reg = <0x00400000 0x03400000>;
-			};
-
-			partition@2 {
-				label = "recovery";
-				reg = <0x03800000 0x00700000>;
-			};
-
-			partition@3 {
-				label = "uboot-code";
-				reg = <0x03f00000 0x00040000>;
-			};
-			partition@4 {
-				label = "uboot-env1";
-				reg = <0x03f40000 0x00020000>;
-			};
-			partition@5 {
-				label = "uboot-env2";
-				reg = <0x03f60000 0x00020000>;
-			};
-		};
-
-		fram@1,0 {
-			compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq";
-			reg = <1 0x00000000 0x00010000>;
-		};
-
-		asi@2,0 {
-			/* masters mapping: CS, CS offset, size */
-			reg = <2 0x00000000 0x00080000
-			       6 0x00000000 0x00080000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "ifm,ac14xx-asi-fpga";
-			gpios = <
-				&gpio_pic 26 0	/* prog */
-				&gpio_pic 27 0	/* done */
-				&gpio_pic 10 0	/* reset */
-				>;
-
-			master@1 {
-				interrupts = <20 0x2>;
-				interrupt-parent = <&gpio_pic>;
-				chipselect = <2 0x00009000 0x00009100>;
-				label = "AS-i master 1";
-			};
-
-			master@2 {
-				interrupts = <21 0x2>;
-				interrupt-parent = <&gpio_pic>;
-				chipselect = <6 0x00009000 0x00009100>;
-				label = "AS-i master 2";
-			};
-		};
-
-		netx@3,0 {
-			compatible = "ifm,netx";
-			reg = <0x3 0x00000000 0x00020000>;
-			chipselect = <3 0x00101140 0x00203100>;
-			interrupts = <17 0x8>;
-			gpios = <&gpio_pic 15 0>;
-		};
-
-		safety@5,0 {
-			compatible = "ifm,safety";
-			reg = <0x5 0x00000000 0x00010000>;
-			chipselect = <5 0x00009000 0x00009100>;
-			interrupts = <22 0x2>;
-			interrupt-parent = <&gpio_pic>;
-			gpios = <
-				&gpio_pic 12 0	/* prog */
-				&gpio_pic 11 0	/* done */
-				>;
-		};
-	};
-
-	clocks {
-		osc {
-			clock-frequency = <25000000>;
-		};
-	};
-
-	soc@80000000 {
-		bus-frequency = <80000000>;	/* 80 MHz ips bus */
-
-		clock@f00 {
-			compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock";
-		};
-
-		/*
-		 * GPIO PIC:
-		 * interrupts cell = <pin nr, sense>
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		gpio_pic: gpio@1100 {
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sdhc@1500 {
-			cd-gpios = <&gpio_pic 23 0>;	/* card detect */
-			wp-gpios = <&gpio_pic 24 0>;	/* write protect */
-			wp-inverted;			/* WP active high */
-		};
-
-		i2c@1700 {
-			/* use Fast-mode */
-			clock-frequency = <400000>;
-
-			at24@30 {
-				compatible = "at24,24c01";
-				reg = <0x30>;
-			};
-
-			at24@31 {
-				compatible = "at24,24c01";
-				reg = <0x31>;
-			};
-
-			temp@48 {
-				compatible = "ad,ad7414";
-				reg = <0x48>;
-			};
-
-			at24@50 {
-				compatible = "at24,24c01";
-				reg = <0x50>;
-			};
-
-			at24@51 {
-				compatible = "at24,24c01";
-				reg = <0x51>;
-			};
-
-			at24@52 {
-				compatible = "at24,24c01";
-				reg = <0x52>;
-			};
-
-			at24@53 {
-				compatible = "at24,24c01";
-				reg = <0x53>;
-			};
-
-			at24@54 {
-				compatible = "at24,24c01";
-				reg = <0x54>;
-			};
-
-			at24@55 {
-				compatible = "at24,24c01";
-				reg = <0x55>;
-			};
-
-			at24@56 {
-				compatible = "at24,24c01";
-				reg = <0x56>;
-			};
-
-			at24@57 {
-				compatible = "at24,24c01";
-				reg = <0x57>;
-			};
-
-			rtc@68 {
-				compatible = "stm,m41t00";
-				reg = <0x68>;
-			};
-		};
-
-		axe_pic: axe-base@2000 {
-			compatible = "fsl,mpc5121-axe-base";
-			reg = <0x2000 0x100>;
-			interrupts = <42 0x8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		axe-app {
-			compatible = "fsl,mpc5121-axe-app";
-			interrupt-parent = <&axe_pic>;
-			interrupts = <
-					/* soft interrupts */
-					0 0x0	1 0x0	2 0x0	3 0x0
-					4 0x0	5 0x0	6 0x0	7 0x0
-					/* fifo interrupts */
-					8 0x0	9 0x0	10 0x0	11 0x0
-				>;
-		};
-
-		display@2100 {
-			edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00
-				0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27
-				1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01
-				01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04
-				21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F
-				3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45
-				54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10
-				00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5];
-		};
-
-		can@2300 {
-			status = "disabled";
-		};
-
-		can@2380 {
-			status = "disabled";
-		};
-
-		viu@2400 {
-			status = "disabled";
-		};
-
-		mdio@2800 {
-			phy0: ethernet-phy@1f {
-				compatible = "smsc,lan8700";
-				reg = <0x1f>;
-			};
-		};
-
-		enet: ethernet@2800 {
-			phy-handle = <&phy0>;
-		};
-
-		usb@3000 {
-			status = "disabled";
-		};
-
-		usb@4000 {
-			status = "disabled";
-		};
-
-		/* PSC3 serial port A, aka ttyPSC0 */
-		serial0: psc@11300 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			fsl,rx-fifo-size = <512>;
-			fsl,tx-fifo-size = <512>;
-		};
-
-		/* PSC4 in SPI mode */
-		spi4: psc@11400 {
-			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
-			fsl,rx-fifo-size = <768>;
-			fsl,tx-fifo-size = <768>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			num-cs = <1>;
-			cs-gpios = <&gpio_pic 25 0>;
-
-			flash: m25p128@0 {
-				compatible = "st,m25p128";
-				spi-max-frequency = <20000000>;
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "spi-flash0";
-					reg = <0x00000000 0x01000000>;
-				};
-			};
-		};
-
-		/* PSC5 in SPI mode */
-		spi5: psc@11500 {
-			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
-			fsl,mode = "spi-master";
-			fsl,rx-fifo-size = <128>;
-			fsl,tx-fifo-size = <128>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			lcd@0 {
-				compatible = "ilitek,ili922x";
-				reg = <0>;
-				spi-max-frequency = <100000>;
-				spi-cpol;
-				spi-cpha;
-			};
-		};
-
-		/* PSC7 serial port C, aka ttyPSC2 */
-		serial7: psc@11700 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			fsl,rx-fifo-size = <512>;
-			fsl,tx-fifo-size = <512>;
-		};
-
-		matrix_keypad@0 {
-			compatible = "gpio-matrix-keypad";
-			debounce-delay-ms = <5>;
-			col-scan-delay-us = <1>;
-			gpio-activelow;
-			col-gpios-binary;
-			col-switch-delay-ms = <200>;
-
-			col-gpios = <&gpio_pic 1 0>;	/* pin1 */
-
-			row-gpios = <&gpio_pic 2 0	/* pin2 */
-				     &gpio_pic 3 0	/* pin3 */
-				     &gpio_pic 4 0>;	/* pin4 */
-
-			linux,keymap = <0x0000006e	/* FN LEFT */
-					0x01000067	/* UP */
-					0x02000066	/* FN RIGHT */
-					0x00010069	/* LEFT */
-					0x0101006a	/* DOWN */
-					0x0201006c>;	/* RIGHT */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		backlight {
-			label = "backlight";
-			gpios = <&gpio_pic 0 0>;
-			default-state = "keep";
-		};
-		green {
-			label = "green";
-			gpios = <&gpio_pic 18 0>;
-			default-state = "keep";
-		};
-		red {
-			label = "red";
-			gpios = <&gpio_pic 19 0>;
-			default-state = "keep";
-		};
-	};
-};
diff --git a/src/powerpc/acadia.dts b/src/powerpc/acadia.dts
deleted file mode 100644
index 57291f61ffe7..000000000000
--- a/src/powerpc/acadia.dts
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Device Tree Source for AMCC Acadia (405EZ)
- *
- * Copyright IBM Corp. 2008
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "amcc,acadia";
-	compatible = "amcc,acadia";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EZ";
-			reg = <0x0>;
-			clock-frequency = <0>; /* Filled in by wrapper */
-			timebase-frequency = <0>; /* Filled in by wrapper */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>;
-			d-cache-size = <16384>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>; /* Filled in by wrapper */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic-405ez", "ibm,uic";
-		interrupt-controller;
-		dcr-reg = <0x0c0 0x009>;
-		cell-index = <0>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	plb {
-		compatible = "ibm,plb-405ez", "ibm,plb3";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by wrapper */
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-405ez", "ibm,mcmal";
-			dcr-reg = <0x380 0x62>;
-			num-tx-chans = <1>;
-			num-rx-chans = <1>;
-			interrupt-parent = <&UIC0>;
-			/* 405EZ has only 3 interrupts to the UIC, as
-			 * SERR, TXDE, and RXDE are or'd together into
-			 * one UIC bit
-			 */
-			interrupts = <
-				0x13 0x4 /* TXEOB */
-				0x15 0x4 /* RXEOB */
-				0x12 0x4 /* SERR, TXDE, RXDE */>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405ez", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			dcr-reg = <0x0a 0x05>;
-			clock-frequency = <0>; /* Filled in by wrapper */
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x8>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by wrapper */
-				current-speed = <115200>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x5 0x4>;
-			};
-
-			UART1: serial@ef600400 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600400 0x8>;
-				clock-frequency = <0>; /* Filled in by wrapper */
-				current-speed = <115200>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x6 0x4>;
-			};
-
-			IIC: i2c@ef600500 {
-				compatible = "ibm,iic-405ez", "ibm,iic";
-				reg = <0xef600500 0x11>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0xa 0x4>;
-			};
-
-			GPIO0: gpio@ef600700 {
-				compatible = "ibm,gpio-405ez";
-				reg = <0xef600700 0x20>;
-			};
-
-			GPIO1: gpio@ef600800 {
-				compatible = "ibm,gpio-405ez";
-				reg = <0xef600800 0x20>;
-			};
-
-			EMAC0: ethernet@ef600900 {
-				device_type = "network";
-				compatible = "ibm,emac-405ez", "ibm,emac";
-				interrupt-parent = <&UIC0>;
-				interrupts = <
-					0x10 0x4 /* Ethernet */
-					0x11 0x4 /* Ethernet Wake up */>;
-				local-mac-address = [000000000000]; /* Filled in by wrapper */
-				reg = <0xef600900 0x70>;
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "mii";
-				phy-map = <0x0>;
-			};
-
-			CAN0: can@ef601000 {
-				compatible = "amcc,can-405ez";
-				reg = <0xef601000 0x620>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-			CAN1: can@ef601800 {
-				compatible = "amcc,can-405ez";
-				reg = <0xef601800 0x620>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x8 0x4>;
-			};
-
-			cameleon@ef602000 {
-				compatible = "amcc,cameleon-405ez";
-				reg = <0xef602000 0x800>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0xb 0x4 0xc 0x4>;
-			};
-
-			ieee1588@ef602800 {
-				compatible = "amcc,ieee1588-405ez";
-				reg = <0xef602800 0x60>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x4 0x4>;
-				/* This thing is a bit weird.  It has it's own UIC
-				 * that it uses to generate snapshot triggers.  We
-				 * don't really support this device yet, and it needs
-				 * work to figure this out.
-				 */
-				dcr-reg = <0xe0 0x9>;
-			};
-
-			usb@ef603000 {
-				compatible = "ohci-be";
-				reg = <0xef603000 0x80>;
-				interrupts-parent = <&UIC0>;
-				interrupts = <0xd 0x4 0xe 0x4>;
-			};
-
-			dac@ef603300 {
-				compatible = "amcc,dac-405ez";
-				reg = <0xef603300 0x40>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x18 0x4>;
-			};
-
-			adc@ef603400 {
-				compatible = "amcc,adc-405ez";
-				reg = <0xef603400 0x40>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x17 0x4>;
-			};
-
-			spi@ef603500 {
-				compatible = "amcc,spi-405ez";
-				reg = <0xef603500 0x100>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x9 0x4>;
-			};
-		};
-
-		EBC0: ebc {
-			compatible = "ibm,ebc-405ez", "ibm,ebc";
-			dcr-reg = <0x12 0x2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			clock-frequency = <0>; /* Filled in by wrapper */
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};
diff --git a/src/powerpc/adder875-redboot.dts b/src/powerpc/adder875-redboot.dts
deleted file mode 100644
index 083984720b2f..000000000000
--- a/src/powerpc/adder875-redboot.dts
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Device Tree Source for MPC885 ADS running RedBoot
- *
- * Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
-	model = "Analogue & Micro Adder MPC875";
-	compatible = "analogue-and-micro,adder875";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		console = &console;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,875@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <16>;
-			i-cache-line-size = <16>;
-			d-cache-size = <8192>;
-			i-cache-size = <8192>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			interrupts = <15 2>;	// decrementer interrupt
-			interrupt-parent = <&PIC>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x01000000>;
-	};
-
-	localbus@fa200100 {
-		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
-		             "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xfa200100 0x40>;
-
-		ranges = <
-			0 0 0xfe000000 0x00800000
-			2 0 0xfa100000 0x00008000
-		>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x800000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-	};
-
-	soc@fa200000 {
-		compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfa200000 0x00004000>;
-
-		// Temporary until code stops depending on it.
-		device_type = "soc";
-
-		// Temporary until get_immrbase() is fixed.
-		reg = <0xfa200000 0x4000>;
-
-		mdio@e00 {
-			compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <0xe00 0x188>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			PHY0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			PHY1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		eth0: ethernet@e00 {
-			device_type = "network";
-			compatible = "fsl,mpc875-fec-enet",
-			             "fsl,pq1-fec-enet";
-			reg = <0xe00 0x188>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <3 1>;
-			interrupt-parent = <&PIC>;
-			phy-handle = <&PHY0>;
-			linux,network-index = <0>;
-		};
-
-		eth1: ethernet@1e00 {
-			device_type = "network";
-			compatible = "fsl,mpc875-fec-enet",
-			             "fsl,pq1-fec-enet";
-			reg = <0x1e00 0x188>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <7 1>;
-			interrupt-parent = <&PIC>;
-			phy-handle = <&PHY1>;
-			linux,network-index = <1>;
-		};
-
-		PIC: interrupt-controller@0 {
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0 0x24>;
-			compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
-		};
-
-		cpm@9c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
-			interrupts = <0>;	// cpm error interrupt
-			interrupt-parent = <&CPM_PIC>;
-			reg = <0x9c0 0x40>;
-			ranges;
-
-			muram {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x2000 0x2000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0 0x1c00>;
-				};
-			};
-
-			brg@9f0 {
-				compatible = "fsl,mpc875-brg",
-				             "fsl,cpm1-brg",
-				             "fsl,cpm-brg";
-				clock-frequency = <50000000>;
-				reg = <0x9f0 0x10>;
-			};
-
-			CPM_PIC: interrupt-controller@930 {
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupts = <5 2 0 2>;
-				interrupt-parent = <&PIC>;
-				reg = <0x930 0x20>;
-				compatible = "fsl,mpc875-cpm-pic",
-				             "fsl,cpm1-pic";
-			};
-
-			console: serial@a80 {
-				device_type = "serial";
-				compatible = "fsl,mpc875-smc-uart",
-				             "fsl,cpm1-smc-uart";
-				reg = <0xa80 0x10 0x3e80 0x40>;
-				interrupts = <4>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x0090>;
-				current-speed = <115200>;
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = &console;
-	};
-};
diff --git a/src/powerpc/adder875-uboot.dts b/src/powerpc/adder875-uboot.dts
deleted file mode 100644
index e4554caf8f8d..000000000000
--- a/src/powerpc/adder875-uboot.dts
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Device Tree Source for MPC885 ADS running U-Boot
- *
- * Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
-	model = "Analogue & Micro Adder MPC875";
-	compatible = "analogue-and-micro,adder875";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		console = &console;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,875@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <16>;
-			i-cache-line-size = <16>;
-			d-cache-size = <8192>;
-			i-cache-size = <8192>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			interrupts = <15 2>;	// decrementer interrupt
-			interrupt-parent = <&PIC>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x01000000>;
-	};
-
-	localbus@ff000100 {
-		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus",
-		             "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xff000100 0x40>;
-
-		ranges = <
-			0 0 0xfe000000 0x01000000
-		>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x800000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-	};
-
-	soc@ff000000 {
-		compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xff000000 0x00004000>;
-
-		// Temporary until code stops depending on it.
-		device_type = "soc";
-
-		// Temporary until get_immrbase() is fixed.
-		reg = <0xff000000 0x4000>;
-
-		mdio@e00 {
-			compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <0xe00 0x188>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			PHY0: ethernet-phy@0 {
-				reg = <0>;
-			};
-
-			PHY1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		eth0: ethernet@e00 {
-			device_type = "network";
-			compatible = "fsl,mpc875-fec-enet",
-			             "fsl,pq1-fec-enet";
-			reg = <0xe00 0x188>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <3 1>;
-			interrupt-parent = <&PIC>;
-			phy-handle = <&PHY0>;
-			linux,network-index = <0>;
-		};
-
-		eth1: ethernet@1e00 {
-			device_type = "network";
-			compatible = "fsl,mpc875-fec-enet",
-			             "fsl,pq1-fec-enet";
-			reg = <0x1e00 0x188>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <7 1>;
-			interrupt-parent = <&PIC>;
-			phy-handle = <&PHY1>;
-			linux,network-index = <1>;
-		};
-
-		PIC: interrupt-controller@0 {
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0 0x24>;
-			compatible = "fsl,mpc875-pic", "fsl,pq1-pic";
-		};
-
-		cpm@9c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus";
-			interrupts = <0>;	// cpm error interrupt
-			interrupt-parent = <&CPM_PIC>;
-			reg = <0x9c0 0x40>;
-			ranges;
-
-			muram {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x2000 0x2000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0 0x1c00>;
-				};
-			};
-
-			brg@9f0 {
-				compatible = "fsl,mpc875-brg",
-				             "fsl,cpm1-brg",
-				             "fsl,cpm-brg";
-				clock-frequency = <50000000>;
-				reg = <0x9f0 0x10>;
-			};
-
-			CPM_PIC: interrupt-controller@930 {
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupts = <5 2 0 2>;
-				interrupt-parent = <&PIC>;
-				reg = <0x930 0x20>;
-				compatible = "fsl,mpc875-cpm-pic",
-				             "fsl,cpm1-pic";
-			};
-
-			console: serial@a80 {
-				device_type = "serial";
-				compatible = "fsl,mpc875-smc-uart",
-				             "fsl,cpm1-smc-uart";
-				reg = <0xa80 0x10 0x3e80 0x40>;
-				interrupts = <4>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x0090>;
-				current-speed = <115200>;
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = &console;
-	};
-};
diff --git a/src/powerpc/akebono.dts b/src/powerpc/akebono.dts
deleted file mode 100644
index f92ecfed3d2f..000000000000
--- a/src/powerpc/akebono.dts
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * Device Tree Source for IBM Embedded PPC 476 Platform
- *
- * Copyright © 2013 Tony Breeds IBM Corporation
- * Copyright © 2013 Alistair Popple IBM Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/memreserve/ 0x01f00000 0x00100000;	// spin table
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	model = "ibm,akebono";
-	compatible = "ibm,akebono", "ibm,476gtr";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		serial0 = &UART0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,476";
-			reg = <0>;
-			clock-frequency = <1600000000>; // 1.6 GHz
-			timebase-frequency = <100000000>; // 100Mhz
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			status = "ok";
-		};
-		cpu@1 {
-			device_type = "cpu";
-			model = "PowerPC,476";
-			reg = <1>;
-			clock-frequency = <1600000000>; // 1.6 GHz
-			timebase-frequency = <100000000>; // 100Mhz
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			status = "disabled";
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x01f00000>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
-	};
-
-	MPIC: interrupt-controller {
-		compatible = "chrp,open-pic";
-		interrupt-controller;
-		dcr-reg = <0xffc00000 0x00040000>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		single-cpu-affinity;
-	};
-
-	plb {
-		compatible = "ibm,plb6";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		clock-frequency = <200000000>; // 200Mhz
-
-		HSTA0: hsta@310000e0000 {
-			compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi";
-			reg = <0x310 0x000e0000 0x0 0xf0>;
-			interrupt-parent = <&MPIC>;
-			interrupts = <108 0
-				      109 0
-				      110 0
-				      111 0
-				      112 0
-				      113 0
-				      114 0
-				      115 0
-				      116 0
-				      117 0
-				      118 0
-				      119 0
-				      120 0
-				      121 0
-				      122 0
-				      123 0>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-476gtr", "ibm,mcmal2";
-			dcr-reg = <0xc0000000 0x062>;
-			num-tx-chans = <1>;
-			num-rx-chans = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-parent = <&MPIC>;
-			interrupts = <	/*TXEOB*/ 77 0x4
-					/*RXEOB*/ 78 0x4
-					/*SERR*/  76 0x4
-					/*TXDE*/  79 0x4
-					/*RXDE*/  80 0x4>;
-		};
-
-		SATA0: sata@30000010000 {
-			compatible = "ibm,476gtr-ahci";
-			reg = <0x300 0x00010000 0x0 0x10000>;
-			interrupt-parent = <&MPIC>;
-			interrupts = <93 2>;
-		};
-
-		EHCI0: ehci@30010000000 {
-			compatible = "ibm,476gtr-ehci", "generic-ehci";
-			reg = <0x300 0x10000000 0x0 0x10000>;
-			interrupt-parent = <&MPIC>;
-			interrupts = <85 2>;
-		};
-
-		SD0: sd@30000000000 {
-			compatible = "ibm,476gtr-sdhci", "generic-sdhci";
-			reg = <0x300 0x00000000 0x0 0x10000>;
-			interrupts = <91 2>;
-			interrupt-parent = <&MPIC>;
-		};
-
-		OHCI0: ohci@30010010000 {
-			compatible = "ibm,476gtr-ohci", "generic-ohci";
-			reg = <0x300 0x10010000 0x0 0x10000>;
-			interrupt-parent = <&MPIC>;
-			interrupts = <89 1>;
-			};
-
-		OHCI1: ohci@30010020000 {
-			compatible = "ibm,476gtr-ohci", "generic-ohci";
-			reg = <0x300 0x10020000 0x0 0x10000>;
-			interrupt-parent = <&MPIC>;
-			interrupts = <88 1>;
-			};
-
-		POB0: opb {
-			compatible = "ibm,opb-4xx", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/* Wish there was a nicer way of specifying a full
-			 * 32-bit range
-			 */
-			ranges = <0x00000000 0x0000033f 0x00000000 0x80000000
-				  0x80000000 0x0000033f 0x80000000 0x80000000>;
-			clock-frequency = <100000000>;
-
-			RGMII0: emac-rgmii-wol@50004 {
-				compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol";
-				reg = <0x50004 0x00000008>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@30000 {
-				device_type = "network";
-				compatible = "ibm,emac-476gtr", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4
-						 /*Wake*/   0x1 &MPIC 82 0x4>;
-				reg = <0x30000 0x78>;
-
-				/* local-mac-address will normally be added by
-				 * the wrapper. If your device doesn't support
-				 * passing data to the wrapper (in the form
-				 * local-mac-addr=<hwaddr>) then you will need
-				 * to set it manually here. */
-				//local-mac-address = [000000000000];
-
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-wol-device = <&RGMII0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			UART0: serial@10000 {
-				device_type = "serial";
-				compatible = "ns16750", "ns16550";
-				reg = <0x10000 0x00000008>;
-				virtual-reg = <0xe8010000>;
-				clock-frequency = <1851851>;
-				current-speed = <38400>;
-				interrupt-parent = <&MPIC>;
-				interrupts = <39 2>;
-			};
-
-			IIC0: i2c@00000000 {
-				compatible = "ibm,iic-476gtr", "ibm,iic";
-				reg = <0x0 0x00000020>;
-				interrupt-parent = <&MPIC>;
-				interrupts = <37 2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rtc@68 {
-					compatible = "stm,m41t80", "m41st85";
-					reg = <0x68>;
-				};
-			};
-
-			IIC1: i2c@00000100 {
-				compatible = "ibm,iic-476gtr", "ibm,iic";
-				reg = <0x100 0x00000020>;
-				interrupt-parent = <&MPIC>;
-				interrupts = <38 2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				avr@58 {
-					compatible = "ibm,akebono-avr";
-					reg = <0x58>;
-				};
-			};
-
-			FPGA0: fpga@ebc00000 {
-				compatible = "ibm,akebono-fpga";
-				reg = <0xebc00000 0x8>;
-			};
-		};
-
-		PCIE0: pciex@10100000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0x00000101 0x00000000 0x0 0x10000000	       /* Config space access */
-			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
-			dcr-reg = <0xc0 0x20>;
-
-//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
-			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
-			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
-
-			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
-			 * PCI devices must be able to write to the HSTA module.
-			 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
-
-			/* This drives busses 0 to 0xf */
-			bus-range = <0x0 0xf>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */
-				0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */
-				0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */
-				0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>;
-		};
-
-		PCIE1: pciex@20100000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0x00000201 0x00000000 0x0 0x10000000	       /* Config space access */
-			       0x00000200 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
-			dcr-reg = <0x100 0x20>;
-
-//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
-			ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000
-			          0x01000000 0x0        0x0        0x00000240 0x0        0x0 0x00010000>;
-
-			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
-			 * PCI devices must be able to write to the HSTA module.
-			 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
-
-			/* This drives busses 0 to 0xf */
-			bus-range = <0x0 0xf>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */
-				0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */
-				0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */
-				0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>;
-		};
-
-		PCIE2: pciex@18100000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
-			primary;
-			port = <0x2>; /* port number */
-			reg = <0x00000181 0x00000000 0x0 0x10000000	       /* Config space access */
-			       0x00000180 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
-			dcr-reg = <0xe0 0x20>;
-
-//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
-			ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000
-			          0x01000000 0x0        0x0        0x000001c0 0x0        0x0 0x00010000>;
-
-			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
-			 * PCI devices must be able to write to the HSTA module.
-			 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
-
-			/* This drives busses 0 to 0xf */
-			bus-range = <0x0 0xf>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */
-				0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */
-				0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */
-				0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>;
-		};
-
-		PCIE3: pciex@28100000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
-			primary;
-			port = <0x3>; /* port number */
-			reg = <0x00000281 0x00000000 0x0 0x10000000	       /* Config space access */
-			       0x00000280 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
-			dcr-reg = <0x120 0x20>;
-
-//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
-			ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000
-			          0x01000000 0x0        0x0        0x000002c0 0x0        0x0 0x00010000>;
-
-			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
-			 * PCI devices must be able to write to the HSTA module.
-			 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
-
-			/* This drives busses 0 to 0xf */
-			bus-range = <0x0 0xf>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */
-				0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */
-				0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */
-				0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = &UART0;
-	};
-};
diff --git a/src/powerpc/amigaone.dts b/src/powerpc/amigaone.dts
deleted file mode 100644
index 49ac36b16dd7..000000000000
--- a/src/powerpc/amigaone.dts
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * AmigaOne Device Tree Source
- *
- * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "AmigaOne";
-	compatible = "eyetech,amigaone";
-	coherency-off;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#cpus = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// 33.3 MHz, from U-boot
-			clock-frequency = <0>;		// From U-boot
-			bus-frequency = <0>;		// From U-boot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0>;				// From U-boot
-	};
-
-	pci@80000000 {
-		device_type = "pci";
-		compatible = "mai-logic,articia-s";
-		bus-frequency = <33333333>;
-		bus-range = <0 0xff>;
-		ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000	// PCI I/O
-		          0x02000000 0 0x80000000 0x80000000 0 0x7d000000	// PCI memory
-		          0x02000000 0 0x00000000 0xfd000000 0 0x01000000>;	// PCI alias memory (ISA)
-		// Configuration address and data register.
-		reg = <0xfec00cf8 4
-		       0xfee00cfc 4>;
-		8259-interrupt-acknowledge = <0xfef00000>;
-		// Do not define a interrupt-parent here, if there is no
-		// interrupt-map property.
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		isa@7 {
-			device_type = "isa";
-			compatible = "pciclass,0601";
-			vendor-id = <0x00001106>;
-			device-id = <0x00000686>;
-			revision-id = <0x00000010>;
-			class-code = <0x00060100>;
-			subsystem-id = <0>;
-			subsystem-vendor-id = <0>;
-			devsel-speed = <0x00000001>;
-			min-grant = <0>;
-			max-latency = <0>;
-			/* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */
-			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
-			interrupt-parent = <&i8259>;
-			#interrupt-cells = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-
-			dma-controller@0 {
-				compatible = "pnpPNP,200";
-				reg = <1 0x00000000 0x00000020
-				       1 0x00000080 0x00000010
-				       1 0x000000c0 0x00000020>;
-			};
-
-			i8259: interrupt-controller@20 {
-				device_type = "interrupt-controller";
-				compatible = "pnpPNP,000";
-				interrupt-controller;
-				reg = <1 0x00000020 0x00000002
-				       1 0x000000a0 0x00000002
-				       1 0x000004d0 0x00000002>;
-				reserved-interrupts = <2>;
-				#interrupt-cells = <2>;
-			};
-
-			timer@40 {
-				// Also adds pcspkr to platform devices.
-				compatible = "pnpPNP,100";
-				reg = <1 0x00000040 0x00000020>;
-			};
-
-			8042@60 {
-				device_type = "8042";
-				reg = <1 0x00000060 0x00000001
-				       1 0x00000064 0x00000001>;
-				interrupts = <1 3 12 3>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				keyboard@0 {
-					compatible = "pnpPNP,303";
-					reg = <0>;
-				};
-
-				mouse@1 {
-					compatible = "pnpPNP,f03";
-					reg = <1>;
-				};
-			};
-
-			rtc@70 {
-				compatible = "pnpPNP,b00";
-				reg = <1 0x00000070 0x00000002>;
-				interrupts = <8 3>;
-			};
-
-			serial@3f8 {
-				device_type = "serial";
-				compatible = "pnpPNP,501","pnpPNP,500";
-				reg = <1 0x000003f8 0x00000008>;
-				interrupts = <4 3>;
-				clock-frequency = <1843200>;
-				current-speed = <115200>;
-			};
-
-			serial@2f8 {
-				device_type = "serial";
-				compatible = "pnpPNP,501","pnpPNP,500";
-				reg = <1 0x000002f8 0x00000008>;
-				interrupts = <3 3>;
-				clock-frequency = <1843200>;
-				current-speed = <115200>;
-			};
-
-			parallel@378 {
-				device_type = "parallel";
-				// No ECP support for now, otherwise add "pnpPNP,401".
-				compatible = "pnpPNP,400";
-				reg = <1 0x00000378 0x00000003
-				       1 0x00000778 0x00000003>;
-			};
-
-			fdc@3f0 {
-				device_type = "fdc";
-				compatible = "pnpPNP,700";
-				reg = <1 0x000003f0 0x00000008>;
-				interrupts = <6 3>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				disk@0 {
-					reg = <0>;
-				};
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/pci@80000000/isa@7/serial@3f8";
-	};
-};
diff --git a/src/powerpc/arches.dts b/src/powerpc/arches.dts
deleted file mode 100644
index 30f41204acfa..000000000000
--- a/src/powerpc/arches.dts
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Device Tree Source for AMCC Arches (dual 460GT board)
- *
- * (C) Copyright 2008 Applied Micro Circuits Corporation
- * Victor Gallardo <vgallardo@amcc.com>
- * Adam Graham <agraham@amcc.com>
- *
- * Based on the glacier.dts file
- *   Stefan Roese <sr@denx.de>
- *   Copyright 2008 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "amcc,arches";
-	compatible = "amcc,arches";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		ethernet2 = &EMAC2;
-		serial0 = &UART0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,460GT";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			next-level-cache = <&L2C0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-460gt","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-460gt","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-460gt","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC3: interrupt-controller3 {
-		compatible = "ibm,uic-460gt","ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x0f0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-460gt";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-460gt";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	L2C0: l2c {
-		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
-		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
-			   0x030 0x008>;	/* L2 cache DCR's */
-		cache-line-size = <32>;		/* 32 bytes */
-		cache-size = <262144>;		/* L2, 256K */
-		interrupt-parent = <&UIC1>;
-		interrupts = <11 1>;
-	};
-
-	plb {
-		compatible = "ibm,plb-460gt", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		CRYPTO: crypto@180000 {
-			compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
-			reg = <4 0x00180000 0x80400>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <0x1d 0x4>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <3>;
-			num-rx-chans = <24>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 0x6 0x4
-					/*RXEOB*/ 0x7 0x4
-					/*SERR*/  0x3 0x4
-					/*TXDE*/  0x4 0x4
-					/*RXDE*/  0x5 0x4>;
-			desc-base-addr-high = <0x8>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-460gt", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-460gt", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x6 0x4>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl256n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x02000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x001e0000>;
-					};
-					partition@1e0000 {
-						label = "dtb";
-						reg = <0x001e0000 0x00020000>;
-					};
-					partition@200000 {
-						label = "root";
-						reg = <0x00200000 0x00200000>;
-					};
-					partition@400000 {
-						label = "user";
-						reg = <0x00400000 0x01b60000>;
-					};
-					partition@1f60000 {
-						label = "env";
-						reg = <0x01f60000 0x00040000>;
-					};
-					partition@1fa0000 {
-						label = "u-boot";
-						reg = <0x01fa0000 0x00060000>;
-					};
-				};
-			};
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600700 {
-				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <0xef600700 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				sttm@4a {
-					compatible = "ad,ad7414";
-					reg = <0x4a>;
-					interrupt-parent = <&UIC1>;
-					interrupts = <0x0 0x8>;
-				};
-			};
-
-			IIC1: i2c@ef600800 {
-				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <0xef600800 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x3 0x4>;
-			};
-
-			TAH0: emac-tah@ef601350 {
-				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <0xef601350 0x00000030>;
-			};
-
-			TAH1: emac-tah@ef601450 {
-				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <0xef601450 0x00000030>;
-			};
-
-			EMAC0: ethernet@ef600e00 {
-				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
-						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
-				reg = <0xef600e00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				phy-mode = "sgmii";
-				phy-map = <0xffffffff>;
-				gpcs-address = <0x0000000a>;
-				tah-device = <&TAH0>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600f00 {
-				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4sync";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
-						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
-				reg = <0xef600f00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <8>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				phy-mode = "sgmii";
-				phy-map = <0x00000000>;
-				gpcs-address = <0x0000000b>;
-				tah-device = <&TAH1>;
-				tah-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-
-			EMAC2: ethernet@ef601100 {
-				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4sync";
-				interrupt-parent = <&EMAC2>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
-						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
-				reg = <0xef601100 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <2>;
-				mal-rx-channel = <16>;
-				cell-index = <2>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>; /* emac2&3 only */
-				phy-mode = "sgmii";
-				phy-map = <0x00000001>;
-				gpcs-address = <0x0000000C>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/asp834x-redboot.dts b/src/powerpc/asp834x-redboot.dts
deleted file mode 100644
index 9198745f45fb..000000000000
--- a/src/powerpc/asp834x-redboot.dts
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Analogue & Micro ASP8347 Device Tree Source
- *
- * Copyright 2008 Codehermit
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "Analogue & Micro ASP8347E";
-	compatible = "analogue-and-micro,asp8347e";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8347@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;	// 128MB at 0
-	};
-
-	localbus@ff005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8347e-localbus",
-			     "fsl,pq2pro-localbus",
-			     "simple-bus";
-		reg = <0xff005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		ranges = <
-			0 0 0xf0000000 0x02000000
-		>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-	};
-
-	soc8349@ff000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xff000000 0x00100000>;
-		reg = <0xff000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		/* phy type (ULPI or SERIAL) are only types supported for MPH */
-		/* port = 0 or 1 */
-		usb@22000 {
-			compatible = "fsl-usb2-mph";
-			reg = <0x22000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <39 0x8>;
-			phy_type = "ulpi";
-			port0;
-		};
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "otg";
-			phy_type = "ulpi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 08 e5 11 32 33 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			linux,network-index = <0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x1>;
-				};
-
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x2>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 08 e5 11 32 34 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			linux,network-index = <1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <400000000>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <400000000>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		/* May need to remove if on a part without crypto engine */
-		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev2.0,
-			 * we need runtime fixup for >2.0 */
-			descriptor-types-mask = <0x01010ebf>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
-		linux,stdout-path = &serial0;
-	};
-
-};
diff --git a/src/powerpc/b4420qds.dts b/src/powerpc/b4420qds.dts
deleted file mode 100644
index 508dbdf33c81..000000000000
--- a/src/powerpc/b4420qds.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * B4420DS Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of
- * this software, even if advised of the possibility of such damage.
- */
-
-/include/ "fsl/b4420si-pre.dtsi"
-/include/ "b4qds.dtsi"
-
-/ {
-	model = "fsl,B4420QDS";
-	compatible = "fsl,B4420QDS";
-
-	ifc: localbus@ffe124000 {
-		board-control@3,0 {
-			compatible = "fsl,b4420qds-fpga", "fsl,fpga-qixis";
-		};
-	};
-
-};
-
-/include/ "fsl/b4420si-post.dtsi"
diff --git a/src/powerpc/b4860emu.dts b/src/powerpc/b4860emu.dts
deleted file mode 100644
index 85646b4f96e1..000000000000
--- a/src/powerpc/b4860emu.dts
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * B4860 emulator Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of
- * this software, even if advised of the possibility of such damage.
- */
-
-/dts-v1/;
-
-/include/ "fsl/e6500_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,B4860";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		dma0 = &dma0;
-		dma1 = &dma1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e6500@0 {
-			device_type = "cpu";
-			reg = <0 1>;
-			next-level-cache = <&L2>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu1: PowerPC,e6500@2 {
-			device_type = "cpu";
-			reg = <2 3>;
-			next-level-cache = <&L2>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu2: PowerPC,e6500@4 {
-			device_type = "cpu";
-			reg = <4 5>;
-			next-level-cache = <&L2>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu3: PowerPC,e6500@6 {
-			device_type = "cpu";
-			reg = <6 7>;
-			next-level-cache = <&L2>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-	};
-};
-
-/ {
-	model = "fsl,B4860QDS";
-	compatible = "fsl,B4860EMU", "fsl,B4860QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xff800000 0x00010000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <25 2 0 0>;
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 2>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 8>;
-	};
-
-	ddr2: memory-controller@9000 {
-		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
-		reg = <0x9000 0x1000>;
-		interrupts = <16 2 1 9>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,b4-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000
-		       0x11000 0x1000>;
-		interrupts = <16 2 1 4>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 0>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x4000>;
-		fsl,portid-mapping = <0x8000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 1>;
-		pamu0: pamu@0 {
-			reg = <0 0x1000>;
-			fsl,primary-cache-geometry = <8 1>;
-			fsl,secondary-cache-geometry = <32 2>;
-		};
-	};
-
-/include/ "fsl/qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,b4-device-config";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		fsl,liodn-bits = <12>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
-		reg = <0xe1000 0x1000>;
-	};
-
-/include/ "fsl/qoriq-dma-0.dtsi"
-	dma@100300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
-	};
-
-/include/ "fsl/qoriq-dma-1.dtsi"
-	dma@101300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
-	};
-
-/include/ "fsl/qoriq-i2c-0.dtsi"
-/include/ "fsl/qoriq-i2c-1.dtsi"
-/include/ "fsl/qoriq-duart-0.dtsi"
-/include/ "fsl/qoriq-duart-1.dtsi"
-
-	L2: l2-cache-controller@c20000 {
-		compatible = "fsl,b4-l2-cache-controller";
-		reg = <0xc20000 0x1000>;
-		next-level-cache = <&cpc>;
-	};
-};
diff --git a/src/powerpc/b4860qds.dts b/src/powerpc/b4860qds.dts
deleted file mode 100644
index 6bb3707ffe3d..000000000000
--- a/src/powerpc/b4860qds.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * B4860DS Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/b4860si-pre.dtsi"
-/include/ "b4qds.dtsi"
-
-/ {
-	model = "fsl,B4860QDS";
-	compatible = "fsl,B4860QDS";
-
-	ifc: localbus@ffe124000 {
-		board-control@3,0 {
-			compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis";
-		};
-	};
-
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-		port2 {
-			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
-		};
-	};
-
-};
-
-/include/ "fsl/b4860si-post.dtsi"
diff --git a/src/powerpc/b4qds.dtsi b/src/powerpc/b4qds.dtsi
deleted file mode 100644
index 8b47edcfabf0..000000000000
--- a/src/powerpc/b4qds.dtsi
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * B4420DS Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of
- * this software, even if advised of the possibility of such damage.
- */
-
-/ {
-	model = "fsl,B4QDS";
-	compatible = "fsl,B4QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xff800000 0x00010000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x2 0x0 0x10000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 1MB for DTB Image */
-				reg = <0x00100000 0x00100000>;
-				label = "NAND DTB Image";
-			};
-
-			partition@200000 {
-				/* 10MB for Linux Kernel Image */
-				reg = <0x00200000 0x00A00000>;
-				label = "NAND Linux Kernel Image";
-			};
-
-			partition@c00000 {
-				/* 500MB for Root file System Image */
-				reg = <0x00c00000 0x1F400000>;
-				label = "NAND RFS Image";
-			};
-		};
-
-		board-control@3,0 {
-			compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis";
-			reg = <3 0 0x300>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01052000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "sst,sst25wf040";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-			};
-		};
-
-		sdhc@114000 {
-			/*Disabled as there is no sdhc connector on B4420QDS board*/
-			status = "disabled";
-		};
-
-		i2c@118000 {
-			mux@77 {
-				compatible = "nxp,pca9547";
-				reg = <0x77>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					eeprom@50 {
-						compatible = "at24,24c64";
-						reg = <0x50>;
-					};
-					eeprom@51 {
-						compatible = "at24,24c256";
-						reg = <0x51>;
-					};
-					eeprom@53 {
-						compatible = "at24,24c256";
-						reg = <0x53>;
-					};
-					eeprom@57 {
-						compatible = "at24,24c256";
-						reg = <0x57>;
-					};
-					rtc@68 {
-						compatible = "dallas,ds3232";
-						reg = <0x68>;
-					};
-				};
-			};
-		};
-
-		usb@210000 {
-			dr_mode = "host";
-			phy_type = "ulpi";
-		};
-
-	};
-
-	pci0: pcie@ffe200000 {
-		reg = <0xf 0xfe200000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-};
-
-/include/ "fsl/b4si-post.dtsi"
diff --git a/src/powerpc/bamboo.dts b/src/powerpc/bamboo.dts
deleted file mode 100644
index aa68911f6560..000000000000
--- a/src/powerpc/bamboo.dts
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Device Tree Source for AMCC Bamboo
- *
- * Copyright (c) 2006, 2007 IBM Corp.
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- *
- * FIXME: Draft only!
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "amcc,bamboo";
-	compatible = "amcc,bamboo";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-		serial2 = &UART2;
-		serial3 = &UART3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,440EP";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-440ep","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-440ep","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-440ep";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-440ep";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	plb {
-		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		DMA0: dma {
-			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <0x100 0x027>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <4>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-		};
-
-		POB0: opb {
-		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
-			 * bits.
-			 */
-		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
-			          0x80000000 0x00000000 0x80000000 0x80000000>;
-		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <0x7 0x4>;
-		  	clock-frequency = <0>; /* Filled in by zImage */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-			};
-
-			UART0: serial@ef600300 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600300 0x00000008>;
-		   		virtual-reg = <0xef600300>;
-		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <115200>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0x0 0x4>;
-	   		};
-
-			UART1: serial@ef600400 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600400 0x00000008>;
-		   		virtual-reg = <0xef600400>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0x1 0x4>;
-	   		};
-
-			UART2: serial@ef600500 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600500 0x00000008>;
-		   		virtual-reg = <0xef600500>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0x3 0x4>;
-	   		};
-
-			UART3: serial@ef600600 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600600 0x00000008>;
-		   		virtual-reg = <0xef600600>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0x4 0x4>;
-	   		};
-
-			IIC0: i2c@ef600700 {
-				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <0xef600700 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			IIC1: i2c@ef600800 {
-				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <0xef600800 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-			ZMII0: emac-zmii@ef600d00 {
-				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <0xef600d00 0x0000000c>;
-			};
-
-			EMAC0: ethernet@ef600e00 {
-				device_type = "network";
-				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1c 0x4 0x1d 0x4>;
-				reg = <0xef600e00 0x00000070>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0 1>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <0>;
-			};
-
-			EMAC1: ethernet@ef600f00 {
-				device_type = "network";
-				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1e 0x4 0x1f 0x4>;
-				reg = <0xef600f00 0x00000070>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <2 3>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <1>;
-			};
-
-			usb@ef601000 {
-				compatible = "ohci-be";
-				reg = <0xef601000 0x00000080>;
-				interrupts = <0x8 0x1 0x9 0x1>;
-				interrupt-parent = < &UIC1 >;
-			};
-		};
-
-		PCI0: pci@ec000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
-			primary;
-			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
-			       0x00000000 0xeed00000 0x00000004	/* IACK */
-			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
-			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed. Chip supports a second
-			 * IO range but we don't use it for now
-			 */
-			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x40000000
-				  0x02000000 0x00000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00100000
-				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* Bamboo has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
-			interrupt-map = <
-				/* IDSEL 1 */
-				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
-
-				/* IDSEL 2 */
-				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
-
-				/* IDSEL 3 */
-				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
-
-				/* IDSEL 4 */
-				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
-			>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};
diff --git a/src/powerpc/bluestone.dts b/src/powerpc/bluestone.dts
deleted file mode 100644
index 7daaca324c01..000000000000
--- a/src/powerpc/bluestone.dts
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * Device Tree for Bluestone (APM821xx) board.
- *
- * Copyright (c) 2010, Applied Micro Circuits Corporation
- * Author: Tirumala R Marri <tmarri@apm.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "apm,bluestone";
-	compatible = "apm,bluestone";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,apm821xx";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			next-level-cache = <&L2C0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC3: interrupt-controller3 {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x0f0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	OCM: ocm@400040000 {
-		compatible = "ibm,ocm";
-		status = "ok";
-		cell-index = <1>;
-		/* configured in U-Boot */
-		reg = <4 0x00040000 0x8000>; /* 32K */
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-apm821xx";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-apm821xx";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	L2C0: l2c {
-		compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
-		dcr-reg = <0x020 0x008
-			   0x030 0x008>;
-		cache-line-size = <32>;
-		cache-size = <262144>;
-		interrupt-parent = <&UIC1>;
-		interrupts = <11 1>;
-	};
-
-	plb {
-		compatible = "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-apm821xx";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal2";
-			descriptor-memory = "ocm";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <1>;
-			num-rx-chans = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 0x6 0x4
-					/*RXEOB*/ 0x7 0x4
-					/*SERR*/  0x3 0x4
-					/*TXDE*/  0x4 0x4
-					/*RXDE*/  0x5 0x4>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
-				interrupts = <0x6 0x4>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x00400000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x00180000>;
-					};
-					partition@180000 {
-						label = "env";
-						reg = <0x00180000 0x00020000>;
-					};
-					partition@1a0000 {
-						label = "u-boot";
-						reg = <0x001a0000 0x00060000>;
-					};
-				};
-
-				ndfc@1,0 {
-					compatible = "ibm,ndfc";
-					reg = <0x00000003 0x00000000 0x00002000>;
-					ccr = <0x00001000>;
-					bank-settings = <0x80002222>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					/* 2Gb Nand Flash */
-					nand {
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						partition@0 {
-							label = "firmware";
-							reg   = <0x00000000 0x00C00000>;
-						};
-						partition@c00000 {
-							label = "environment";
-							reg   = <0x00C00000 0x00B00000>;
-						};
-						partition@1700000 {
-							label = "kernel";
-							reg   = <0x01700000 0x00E00000>;
-						};
-						partition@2500000 {
-							label = "root";
-							reg   = <0x02500000 0x08200000>;
-						};
-						partition@a700000 {
-							label = "device-tree";
-							reg   = <0x0A700000 0x00B00000>;
-						};
-						partition@b200000 {
-							label = "config";
-							reg   = <0x0B200000 0x00D00000>;
-						};
-						partition@bf00000 {
-							label = "diag";
-							reg   = <0x0BF00000 0x00C00000>;
-						};
-						partition@cb00000 {
-							label = "vendor";
-							reg   = <0x0CB00000 0x3500000>;
-						};
-					};
-				};
-			};
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1 0x4>;
-			};
-
-			UART1: serial@ef600400 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600400 0x00000008>;
-				virtual-reg = <0xef600400>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600700 {
-				compatible = "ibm,iic";
-				reg = <0xef600700 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rtc@68 {
-					compatible = "stm,m41t80";
-					reg = <0x68>;
-					interrupt-parent = <&UIC0>;
-					interrupts = <0x9 0x8>;
-				};
-				sttm@4C {
-					compatible = "adm,adm1032";
-					reg = <0x4C>;
-					interrupt-parent = <&UIC1>;
-					interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */
-				};
-			};
-
-			IIC1: i2c@ef600800 {
-				compatible = "ibm,iic";
-				reg = <0xef600800 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x3 0x4>;
-			};
-
-			RGMII0: emac-rgmii@ef601500 {
-				compatible = "ibm,rgmii";
-				reg = <0xef601500 0x00000008>;
-				has-mdio;
-			};
-
-			TAH0: emac-tah@ef601350 {
-				compatible = "ibm,tah";
-				reg = <0xef601350 0x00000030>;
-			};
-
-			EMAC0: ethernet@ef600c00 {
-				device_type = "network";
-				compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
-						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
-				reg = <0xef600c00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <16384>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				tah-device = <&TAH0>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCIE0: pciex@d00000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
-			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
-			dcr-reg = <0x100 0x020>;
-			sdr-base = <0x300>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
-				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 40 to 0x7f */
-			bus-range = <0x40 0x7f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
-		};
-
-		MSI: ppc4xx-msi@C10000000 {
-			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
-			reg = < 0xC 0x10000000 0x100
-				0xC 0x10000000 0x100>;
-			sdr-base = <0x36C>;
-			msi-data = <0x00004440>;
-			msi-mask = <0x0000ffe0>;
-			interrupts =<0 1 2 3 4 5 6 7>;
-			interrupt-parent = <&MSI>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			msi-available-ranges = <0x0 0x100>;
-			interrupt-map = <
-				0 &UIC3 0x18 1
-				1 &UIC3 0x19 1
-				2 &UIC3 0x1A 1
-				3 &UIC3 0x1B 1
-				4 &UIC3 0x1C 1
-				5 &UIC3 0x1D 1
-				6 &UIC3 0x1E 1
-				7 &UIC3 0x1F 1
-			>;
-		};
-	};
-};
diff --git a/src/powerpc/bsc9131rdb.dts b/src/powerpc/bsc9131rdb.dts
deleted file mode 100644
index e13d2d4877b0..000000000000
--- a/src/powerpc/bsc9131rdb.dts
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * BSC9131 RDB Device Tree Source
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/bsc9131si-pre.dtsi"
-
-/ {
-	model = "fsl,bsc9131rdb";
-	compatible = "fsl,bsc9131rdb";
-
-	memory {
-		device_type = "memory";
-	};
-
-	board_ifc: ifc: ifc@ff71e000 {
-		/* NAND Flash on board */
-		ranges = <0x0 0x0 0x0 0xff800000 0x00004000>;
-		reg = <0x0 0xff71e000 0x0 0x2000>;
-	};
-
-	board_soc: soc: soc@ff700000 {
-		ranges = <0x0 0x0 0xff700000 0x100000>;
-	};
-};
-
-/include/ "bsc9131rdb.dtsi"
-/include/ "fsl/bsc9131si-post.dtsi"
diff --git a/src/powerpc/bsc9131rdb.dtsi b/src/powerpc/bsc9131rdb.dtsi
deleted file mode 100644
index 9e6c01339ccc..000000000000
--- a/src/powerpc/bsc9131rdb.dtsi
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_ifc {
-
-	nand@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,ifc-nand";
-		reg = <0x0 0x0 0x4000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 3MB for u-boot Bootloader Image */
-			reg = <0x0 0x00300000>;
-			label = "NAND U-Boot Image";
-			read-only;
-		};
-
-		partition@300000 {
-			/* 1MB for DTB Image */
-			reg = <0x00300000 0x00100000>;
-			label = "NAND DTB Image";
-		};
-
-		partition@400000 {
-			/* 8MB for Linux Kernel Image */
-			reg = <0x00400000 0x00800000>;
-			label = "NAND Linux Kernel Image";
-		};
-
-		partition@c00000 {
-			/* Rest space for Root file System Image */
-			reg = <0x00c00000 0x07400000>;
-			label = "NAND RFS Image";
-		};
-	};
-};
-
-&board_soc {
-	/* BSC9131RDB does not have any device on i2c@3100 */
-	i2c@3100 {
-		status = "disabled";
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-
-			/* 512KB for u-boot Bootloader Image */
-			partition@0 {
-				reg = <0x0 0x00080000>;
-				label = "SPI Flash U-Boot Image";
-				read-only;
-			};
-
-			/* 512KB for DTB Image */
-			partition@80000 {
-				reg = <0x00080000 0x00080000>;
-				label = "SPI Flash DTB Image";
-			};
-
-			/* 4MB for Linux Kernel Image */
-			partition@100000 {
-				reg = <0x00100000 0x00400000>;
-				label = "SPI Flash Kernel Image";
-			};
-
-			/*11MB for RFS Image */
-			partition@500000 {
-				reg = <0x00500000 0x00B00000>;
-				label = "SPI Flash RFS Image";
-			};
-
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
-			reg = <0x0>;
-		};
-
-		phy1: ethernet-phy@1 {
-			interrupts = <2 1 0 0>;
-			reg = <0x3>;
-		};
-	};
-
-	sdhc@2e000 {
-		status = "disabled";
-	};
-
-	enet0: ethernet@b0000 {
-		phy-handle = <&phy0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
diff --git a/src/powerpc/bsc9132qds.dts b/src/powerpc/bsc9132qds.dts
deleted file mode 100644
index 6cab1062bc74..000000000000
--- a/src/powerpc/bsc9132qds.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * BSC9132 QDS Device Tree Source
- *
- * Copyright 2014 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/bsc9132si-pre.dtsi"
-
-/ {
-	model = "fsl,bsc9132qds";
-	compatible = "fsl,bsc9132qds";
-
-	memory {
-		device_type = "memory";
-	};
-
-	ifc: ifc@ff71e000 {
-		/* NOR, NAND Flash on board */
-		ranges = <0x0 0x0 0x0 0x88000000 0x08000000
-			  0x1 0x0 0x0 0xff800000 0x00010000>;
-		reg = <0x0 0xff71e000 0x0 0x2000>;
-	};
-
-	soc: soc@ff700000 {
-		ranges = <0x0 0x0 0xff700000 0x100000>;
-	};
-};
-
-/include/ "bsc9132qds.dtsi"
-/include/ "fsl/bsc9132si-post.dtsi"
diff --git a/src/powerpc/bsc9132qds.dtsi b/src/powerpc/bsc9132qds.dtsi
deleted file mode 100644
index af8e88830221..000000000000
--- a/src/powerpc/bsc9132qds.dtsi
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2014 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&ifc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		bank-width = <2>;
-		device-width = <1>;
-	};
-
-	nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,ifc-nand";
-		reg = <0x1 0x0 0x4000>;
-	};
-};
-
-&soc {
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <30000000>;
-		};
-	};
-
-	i2c@3000 {
-		fpga: fpga@66 {
-			compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
-			reg = <0x66>;
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			reg = <0x0>;
-		};
-
-		phy1: ethernet-phy@1 {
-			reg = <0x1>;
-		};
-
-		tbi0: tbi-phy@11 {
-			reg = <0x1f>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi0>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy1>;
-		tbi-handle = <&tbi0>;
-		phy-connection-type = "sgmii";
-	};
-};
diff --git a/src/powerpc/c293pcie.dts b/src/powerpc/c293pcie.dts
deleted file mode 100644
index 6681cc21030b..000000000000
--- a/src/powerpc/c293pcie.dts
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * C293 PCIE Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/c293si-pre.dtsi"
-
-/ {
-	model = "fsl,C293PCIE";
-	compatible = "fsl,C293PCIE";
-
-	memory {
-		device_type = "memory";
-	};
-
-	ifc: ifc@fffe1e000 {
-		reg = <0xf 0xffe1e000 0 0x2000>;
-		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
-			  0x1 0x0 0xf 0xff800000 0x00010000
-			  0x2 0x0 0xf 0xffdf0000 0x00010000>;
-
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-&ifc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x4000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* 1MB for DTB Image */
-			reg = <0x0 0x00100000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@100000 {
-			/* 8 MB for Linux Kernel Image */
-			reg = <0x00100000 0x00800000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@900000 {
-			/* 53MB for rootfs */
-			reg = <0x00900000 0x03500000>;
-			label = "NOR Rootfs Image";
-		};
-
-		partition@3e00000 {
-			/* 1MB for blob encrypted key */
-			reg = <0x03e00000 0x00100000>;
-			label = "NOR blob encrypted key";
-		};
-
-		partition@3f00000 {
-			/* 512KB for u-boot Bootloader Image and evn */
-			reg = <0x03f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-
-	nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,ifc-nand";
-		reg = <0x1 0x0 0x10000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND DTB Image";
-		};
-
-		partition@200000 {
-			/* 16MB for Linux Kernel Image */
-			reg = <0x00200000 0x01000000>;
-			label = "NAND Linux Kernel Image";
-		};
-
-		partition@1200000 {
-			/* 4078MB for Root file System Image */
-			reg = <0x00600000 0xfee00000>;
-			label = "NAND RFS Image";
-		};
-	};
-
-	cpld@2,0 {
-		compatible = "fsl,c293pcie-cpld";
-		reg = <0x2 0x0 0x20>;
-	};
-};
-
-&soc {
-	i2c@3000 {
-		eeprom@50 {
-			compatible = "st,24c1024";
-			reg = <0x50>;
-		};
-
-		adt7461@4c {
-			compatible = "adi,adt7461";
-			reg = <0x4c>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-
-			partition@0 {
-				/* 1MB for u-boot Bootloader Image */
-				/* 1MB for Environment */
-				reg = <0x0 0x00100000>;
-				label = "SPI Flash U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 512KB for DTB Image */
-				reg = <0x00100000 0x00080000>;
-				label = "SPI Flash DTB Image";
-			};
-
-			partition@180000 {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00180000 0x00400000>;
-				label = "SPI Flash Linux Kernel Image";
-			};
-
-			partition@580000 {
-				/* 10.5MB for RFS Image */
-				reg = <0x00580000 0x00a80000>;
-				label = "SPI Flash RFS Image";
-			};
-		};
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupts = <2 1 0 0>;
-			reg = <0x0>;
-		};
-
-		phy1: ethernet-phy@1 {
-			interrupts = <2 1 0 0>;
-			reg = <0x2>;
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		phy-handle = <&phy0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
-/include/ "fsl/c293si-post.dtsi"
diff --git a/src/powerpc/c2k.dts b/src/powerpc/c2k.dts
deleted file mode 100644
index 1e32903cb0a8..000000000000
--- a/src/powerpc/c2k.dts
+++ /dev/null
@@ -1,366 +0,0 @@
-/* Device Tree Source for GEFanuc C2K
- *
- * Author: Remi Machet <rmachet@slac.stanford.edu>
- *
- * Originated from prpmc2800.dts
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "C2K";
-	compatible = "GEFanuc,C2K";
-	coherency-off;
-
-	aliases {
-		pci0 = &PCI0;
-		pci1 = &PCI1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "PowerPC,7447";
-			reg = <0>;
-			clock-frequency = <996000000>;	/* 996 MHz */
-			bus-frequency = <166666667>;	/* 166.6666 MHz */
-			timebase-frequency = <41666667>;	/* 166.6666/4 MHz */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;	/* 1GB */
-	};
-
-	system-controller@d8000000 { /* Marvell Discovery */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		model = "mv64460";
-		compatible = "marvell,mv64360";
-		clock-frequency = <166666667>;		/* 166.66... MHz */
-		reg = <0xd8000000 0x00010000>;
-		virtual-reg = <0xd8000000>;
-		ranges = <0xd4000000 0xd4000000 0x01000000	/* PCI 0 I/O Space */
-			  0x80000000 0x80000000 0x08000000	/* PCI 0 MEM Space */
-			  0xd0000000 0xd0000000 0x01000000	/* PCI 1 I/O Space */
-			  0xa0000000 0xa0000000 0x08000000	/* PCI 1 MEM Space */
-			  0xd8100000 0xd8100000 0x00010000	/* FPGA */
-			  0xd8110000 0xd8110000 0x00010000	/* FPGA USARTs */
-			  0xf8000000 0xf8000000 0x08000000	/* User FLASH */
-			  0x00000000 0xd8000000 0x00010000	/* Bridge's regs */
-			  0xd8140000 0xd8140000 0x00040000>;	/* Integrated SRAM */
-
-		mdio@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,mv64360-mdio";
-			reg = <0x2000 4>;
-			PHY0: ethernet-phy@0 {
-				interrupts = <76>;	/* GPP 12 */
-				interrupt-parent = <&PIC>;
-				reg = <0>;
-			};
-			PHY1: ethernet-phy@1 {
-				interrupts = <76>;	/* GPP 12 */
-				interrupt-parent = <&PIC>;
-				reg = <1>;
-			};
-			PHY2: ethernet-phy@2 {
-				interrupts = <76>;	/* GPP 12 */
-				interrupt-parent = <&PIC>;
-				reg = <2>;
-			};
-		};
-
-		ethernet-group@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,mv64360-eth-group";
-			reg = <0x2000 0x2000>;
-			ethernet@0 {
-				device_type = "network";
-				compatible = "marvell,mv64360-eth";
-				reg = <0>;
-				interrupts = <32>;
-				interrupt-parent = <&PIC>;
-				phy = <&PHY0>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-			ethernet@1 {
-				device_type = "network";
-				compatible = "marvell,mv64360-eth";
-				reg = <1>;
-				interrupts = <33>;
-				interrupt-parent = <&PIC>;
-				phy = <&PHY1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-			ethernet@2 {
-				device_type = "network";
-				compatible = "marvell,mv64360-eth";
-				reg = <2>;
-				interrupts = <34>;
-				interrupt-parent = <&PIC>;
-				phy = <&PHY2>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-		};
-
-		SDMA0: sdma@4000 {
-			compatible = "marvell,mv64360-sdma";
-			reg = <0x4000 0xc18>;
-			virtual-reg = <0xd8004000>;
-			interrupt-base = <0>;
-			interrupts = <36>;
-			interrupt-parent = <&PIC>;
-		};
-
-		SDMA1: sdma@6000 {
-			compatible = "marvell,mv64360-sdma";
-			reg = <0x6000 0xc18>;
-			virtual-reg = <0xd8006000>;
-			interrupt-base = <0>;
-			interrupts = <38>;
-			interrupt-parent = <&PIC>;
-		};
-
-		BRG0: brg@b200 {
-			compatible = "marvell,mv64360-brg";
-			reg = <0xb200 0x8>;
-			clock-src = <8>;
-			clock-frequency = <133333333>;
-			current-speed = <115200>;
-		};
-
-		BRG1: brg@b208 {
-			compatible = "marvell,mv64360-brg";
-			reg = <0xb208 0x8>;
-			clock-src = <8>;
-			clock-frequency = <133333333>;
-			current-speed = <115200>;
-		};
-
-		CUNIT: cunit@f200 {
-			reg = <0xf200 0x200>;
-		};
-
-		MPSCROUTING: mpscrouting@b400 {
-			reg = <0xb400 0xc>;
-		};
-
-		MPSCINTR: mpscintr@b800 {
-			reg = <0xb800 0x100>;
-			virtual-reg = <0xd800b800>;
-		};
-
-		MPSC0: mpsc@8000 {
-			compatible = "marvell,mv64360-mpsc";
-			reg = <0x8000 0x38>;
-			virtual-reg = <0xd8008000>;
-			sdma = <&SDMA0>;
-			brg = <&BRG0>;
-			cunit = <&CUNIT>;
-			mpscrouting = <&MPSCROUTING>;
-			mpscintr = <&MPSCINTR>;
-			cell-index = <0>;
-			interrupts = <40>;
-			interrupt-parent = <&PIC>;
-		};
-
-		MPSC1: mpsc@9000 {
-			compatible = "marvell,mv64360-mpsc";
-			reg = <0x9000 0x38>;
-			virtual-reg = <0xd8009000>;
-			sdma = <&SDMA1>;
-			brg = <&BRG1>;
-			cunit = <&CUNIT>;
-			mpscrouting = <&MPSCROUTING>;
-			mpscintr = <&MPSCINTR>;
-			cell-index = <1>;
-			interrupts = <42>;
-			interrupt-parent = <&PIC>;
-		};
-
-		wdt@b410 {			/* watchdog timer */
-			compatible = "marvell,mv64360-wdt";
-			reg = <0xb410 0x8>;
-		};
-
-		i2c@c000 {
-			compatible = "marvell,mv64360-i2c";
-			reg = <0xc000 0x20>;
-			virtual-reg = <0xd800c000>;
-			interrupts = <37>;
-			interrupt-parent = <&PIC>;
-		};
-
-		PIC: pic {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			compatible = "marvell,mv64360-pic";
-			reg = <0x0000 0x88>;
-			interrupt-controller;
-		};
-
-		mpp@f000 {
-			compatible = "marvell,mv64360-mpp";
-			reg = <0xf000 0x10>;
-		};
-
-		gpp@f100 {
-			compatible = "marvell,mv64360-gpp";
-			reg = <0xf100 0x20>;
-		};
-
-		PCI0: pci@80000000 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			compatible = "marvell,mv64360-pci";
-			reg = <0x0cf8 0x8>;
-			ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000
-				  0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>;
-			bus-range = <0 255>;
-			clock-frequency = <66000000>;
-			interrupt-pci-iack = <0x0c34>;
-			interrupt-parent = <&PIC>;
-			interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* Only one interrupt line for PMC0 slot (INTA) */
-				0x0000 0 0 1 &PIC 88
-			>;
-		};
-
-
-		PCI1: pci@a0000000 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			compatible = "marvell,mv64360-pci";
-			reg = <0x0c78 0x8>;
-			ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000
-				  0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>;
-			bus-range = <0 255>;
-			clock-frequency = <66000000>;
-			interrupt-pci-iack = <0x0cb4>;
-			interrupt-parent = <&PIC>;
-			interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
-			interrupt-map = <
-				/* IDSEL 0x01: PMC1 ? */
-				0x0800 0 0 1 &PIC 88
-				/* IDSEL 0x02: cPCI bridge */
-				0x1000 0 0 1 &PIC 88
-				/* IDSEL 0x03: USB controller */
-				0x1800 0 0 1 &PIC 91
-				/* IDSEL 0x04: SATA controller */
-				0x2000 0 0 1 &PIC 95
-			>;
-		};
-
-		cpu-error@0070 {
-			compatible = "marvell,mv64360-cpu-error";
-			reg = <0x0070 0x10 0x0128 0x28>;
-			interrupts = <3>;
-			interrupt-parent = <&PIC>;
-		};
-
-		sram-ctrl@0380 {
-			compatible = "marvell,mv64360-sram-ctrl";
-			reg = <0x0380 0x80>;
-			interrupts = <13>;
-			interrupt-parent = <&PIC>;
-		};
-
-		pci-error@1d40 {
-			compatible = "marvell,mv64360-pci-error";
-			reg = <0x1d40 0x40 0x0c28 0x4>;
-			interrupts = <12>;
-			interrupt-parent = <&PIC>;
-		};
-
-		pci-error@1dc0 {
-			compatible = "marvell,mv64360-pci-error";
-			reg = <0x1dc0 0x40 0x0ca8 0x4>;
-			interrupts = <16>;
-			interrupt-parent = <&PIC>;
-		};
-
-		mem-ctrl@1400 {
-			compatible = "marvell,mv64360-mem-ctrl";
-			reg = <0x1400 0x60>;
-			interrupts = <17>;
-			interrupt-parent = <&PIC>;
-		};
-		/* Devices attached to the device controller */
-		devicebus@045c {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "marvell,mv64306-devctrl";
-			reg = <0x45C 0x88>;
-			interrupts = <1>;
-			interrupt-parent = <&PIC>;
-			ranges = 	<0 0 0xd8100000 0x10000
-					 2 0 0xd8110000 0x10000
-					 4 0 0xf8000000 0x8000000>;
-			fpga@0,0 {
-				compatible = "sbs,fpga-c2k";
-				reg = <0 0 0x10000>;
-			};
-			fpga_usart@2,0 {
-				compatible = "sbs,fpga_usart-c2k";
-				reg = <2 0 0x10000>;
-			};
-			nor_flash@4,0 {
-				compatible = "cfi-flash";
-				reg = <4 0 0x8000000>; /* 128MB */
-				bank-width = <4>;
-				device-width = <1>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				partition@0 {
-					label = "boot";
-					reg = <0x00000000 0x00080000>;
-				};
-				partition@40000 {
-					label = "kernel";
-					reg = <0x00080000 0x00400000>;
-				};
-				partition@440000 {
-					label = "initrd";
-					reg = <0x00480000 0x00B80000>;
-				};
-				partition@1000000 {
-					label = "rootfs";
-					reg = <0x01000000 0x06800000>;
-				};
-				partition@7800000 {
-					label = "recovery";
-					reg = <0x07800000 0x00800000>;
-					read-only;
-				};
-			};
-		};
-	};
-	chosen {
-		linux,stdout-path = &MPSC0;
-	};
-};
diff --git a/src/powerpc/canyonlands.dts b/src/powerpc/canyonlands.dts
deleted file mode 100644
index 3dc75deafbb3..000000000000
--- a/src/powerpc/canyonlands.dts
+++ /dev/null
@@ -1,557 +0,0 @@
-/*
- * Device Tree Source for AMCC Canyonlands (460EX)
- *
- * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "amcc,canyonlands";
-	compatible = "amcc,canyonlands";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,460EX";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			next-level-cache = <&L2C0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-460ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-460ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-460ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC3: interrupt-controller3 {
-		compatible = "ibm,uic-460ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x0f0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-460ex";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-460ex";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	CPM0: cpm {
-		compatible = "ibm,cpm";
-		dcr-access-method = "native";
-		dcr-reg = <0x160 0x003>;
-		unused-units = <0x00000100>;
-		idle-doze = <0x02000000>;
-		standby = <0xfeff791d>;
-	};
-
-	L2C0: l2c {
-		compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
-		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
-			   0x030 0x008>;	/* L2 cache DCR's */
-		cache-line-size = <32>;		/* 32 bytes */
-		cache-size = <262144>;		/* L2, 256K */
-		interrupt-parent = <&UIC1>;
-		interrupts = <11 1>;
-	};
-
-	plb {
-		compatible = "ibm,plb-460ex", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		CRYPTO: crypto@180000 {
-			compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
-			reg = <4 0x00180000 0x80400>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <0x1d 0x4>;
-		};
-
-		HWRNG: hwrng@110000 {
-			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
-			reg = <4 0x00110000 0x50>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <16>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 0x6 0x4
-					/*RXEOB*/ 0x7 0x4
-					/*SERR*/  0x3 0x4
-					/*TXDE*/  0x4 0x4
-					/*RXDE*/  0x5 0x4>;
-		};
-
-		USB0: ehci@bffd0400 {
-			compatible = "ibm,usb-ehci-460ex", "usb-ehci";
-			interrupt-parent = <&UIC2>;
-			interrupts = <0x1d 4>;
-			reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
-		};
-
-		USB1: usb@bffd0000 {
-			compatible = "ohci-le";
-			reg = <4 0xbffd0000 0x60>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <0x1e 4>;
-		};
-
-		USBOTG0: usbotg@bff80000 {
-			compatible = "amcc,dwc-otg";
-			reg = <0x4 0xbff80000 0x10000>;
-			interrupt-parent = <&USBOTG0>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupts = <0x0 0x1 0x2>;
-			interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
-					 /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
-					 /* DMA */ 0x2 &UIC0 0xc 0x4>;
-		};
-
-		SATA0: sata@bffd1000 {
-			compatible = "amcc,sata-460ex";
-			reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>;
-			interrupt-parent = <&UIC3>;
-			interrupts = <0x0 0x4       /* SATA */
-				      0x5 0x4>;     /* AHBDMA */
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-460ex", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-460ex", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x6 0x4>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x001e0000>;
-					};
-					partition@1e0000 {
-						label = "dtb";
-						reg = <0x001e0000 0x00020000>;
-					};
-					partition@200000 {
-						label = "ramdisk";
-						reg = <0x00200000 0x01400000>;
-					};
-					partition@1600000 {
-						label = "jffs2";
-						reg = <0x01600000 0x00400000>;
-					};
-					partition@1a00000 {
-						label = "user";
-						reg = <0x01a00000 0x02560000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-
-				cpld@2,0 {
-					compatible = "amcc,ppc460ex-bcsr";
-					reg = <2 0x0 0x9>;
-				};
-
-				ndfc@3,0 {
-					compatible = "ibm,ndfc";
-					reg = <0x00000003 0x00000000 0x00002000>;
-					ccr = <0x00001000>;
-					bank-settings = <0x80002222>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					nand {
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						partition@0 {
-							label = "u-boot";
-							reg = <0x00000000 0x00100000>;
-						};
-						partition@100000 {
-							label = "user";
-							reg = <0x00000000 0x03f00000>;
-						};
-					};
-				};
-			};
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1 0x4>;
-			};
-
-			UART1: serial@ef600400 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600400 0x00000008>;
-				virtual-reg = <0xef600400>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600700 {
-				compatible = "ibm,iic-460ex", "ibm,iic";
-				reg = <0xef600700 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-                                rtc@68 {
-                                        compatible = "stm,m41t80";
-                                        reg = <0x68>;
-					interrupt-parent = <&UIC2>;
-					interrupts = <0x19 0x8>;
-                                };
-                                sttm@48 {
-                                        compatible = "ad,ad7414";
-                                        reg = <0x48>;
-					interrupt-parent = <&UIC1>;
-					interrupts = <0x14 0x8>;
-                                };
-			};
-
-			IIC1: i2c@ef600800 {
-				compatible = "ibm,iic-460ex", "ibm,iic";
-				reg = <0xef600800 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x3 0x4>;
-			};
-
-			GPIO0: gpio@ef600b00 {
-				compatible = "ibm,ppc4xx-gpio";
-				reg = <0xef600b00 0x00000048>;
-				gpio-controller;
-			};
-
-			ZMII0: emac-zmii@ef600d00 {
-				compatible = "ibm,zmii-460ex", "ibm,zmii";
-				reg = <0xef600d00 0x0000000c>;
-			};
-
-			RGMII0: emac-rgmii@ef601500 {
-				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
-				reg = <0xef601500 0x00000008>;
-				has-mdio;
-			};
-
-			TAH0: emac-tah@ef601350 {
-				compatible = "ibm,tah-460ex", "ibm,tah";
-				reg = <0xef601350 0x00000030>;
-			};
-
-			TAH1: emac-tah@ef601450 {
-				compatible = "ibm,tah-460ex", "ibm,tah";
-				reg = <0xef601450 0x00000030>;
-			};
-
-			EMAC0: ethernet@ef600e00 {
-				device_type = "network";
-				compatible = "ibm,emac-460ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
-						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
-				reg = <0xef600e00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				tah-device = <&TAH0>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600f00 {
-				device_type = "network";
-				compatible = "ibm,emac-460ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
-						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
-				reg = <0xef600f00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <8>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				tah-device = <&TAH1>;
-				tah-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-		};
-
-		PCIX0: pci@c0ec00000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
-			primary;
-			large-inbound-windows;
-			enable-msi-hole;
-			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
-			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
-			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
-			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
-			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
-				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
-				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0 to 0x3f */
-			bus-range = <0x0 0x3f>;
-
-			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
-			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
-		};
-
-		PCIE0: pciex@d00000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
-			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
-			dcr-reg = <0x100 0x020>;
-			sdr-base = <0x300>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
-				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 40 to 0x7f */
-			bus-range = <0x40 0x7f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
-		};
-
-		PCIE1: pciex@d20000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
-			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
-			dcr-reg = <0x120 0x020>;
-			sdr-base = <0x340>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
-				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 80 to 0xbf */
-			bus-range = <0x80 0xbf>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
-		};
-
-		MSI: ppc4xx-msi@C10000000 {
-			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
-			reg = < 0xC 0x10000000 0x100>;
-			sdr-base = <0x36C>;
-			msi-data = <0x00000000>;
-			msi-mask = <0x44440000>;
-			interrupt-count = <3>;
-			interrupts = <0 1 2 3>;
-			interrupt-parent = <&UIC3>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &UIC3 0x18 1
-					1 &UIC3 0x19 1
-					2 &UIC3 0x1A 1
-					3 &UIC3 0x1B 1>;
-		};
-	};
-};
diff --git a/src/powerpc/charon.dts b/src/powerpc/charon.dts
deleted file mode 100644
index 0e00e508eaa6..000000000000
--- a/src/powerpc/charon.dts
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * charon board Device Tree Source
- *
- * Copyright (C) 2007 Semihalf
- * Marian Balakowicz <m8@semihalf.com>
- *
- * Copyright (C) 2010 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "anon,charon";
-	compatible = "anon,charon";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;	// 128MB
-	};
-
-	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
-		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
-			fsl,has-wdt;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			device_type = "dma-controller";
-			compatible = "fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
-		};
-
-		serial@2000 {		// PSC1
-			compatible = "fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
-		};
-
-		serial@2400 {		// PSC3
-			compatible = "fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
-		};
-
-		ethernet@3000 {
-			compatible = "fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			fixed-link = <1 1 100 0 0>;
-		};
-
-		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
-		};
-
-		ata@3a00 {
-			compatible = "fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
-
-		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
-
-			dtt@28 {
-				compatible = "national,lm80";
-				reg = <0x28>;
-			};
-
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
-	};
-
-	localbus {
-		compatible = "fsl,mpc5200-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <	0 0 0xfc000000 0x02000000
-				1 0 0xe0000000 0x04000000 // CS1 range, SM501
-				3 0 0xe8000000 0x00080000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-		};
-
-		display@1,0 {
-			compatible = "smi,sm501";
-			reg = <1 0x00000000 0x00800000
-			       1 0x03e00000 0x00200000>;
-			mode = "640x480-32@60";
-			interrupts = <1 1 3>;
-			little-endian;
-		};
-
-		mram0@3,0 {
-			compatible = "mtd-ram";
-			reg = <3 0x00000 0x80000>;
-			bank-width = <1>;
-		};
-	};
-
-	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
-				 0xc000 0 0 2 &mpc5200_pic 0 0 3
-				 0xc000 0 0 3 &mpc5200_pic 0 0 3
-				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
-	};
-};
diff --git a/src/powerpc/cm5200.dts b/src/powerpc/cm5200.dts
deleted file mode 100644
index fb580dd84ddf..000000000000
--- a/src/powerpc/cm5200.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * CM5200 board Device Tree Source
- *
- * Copyright (C) 2007 Semihalf
- * Marian Balakowicz <m8@semihalf.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 { fsl,has-wdt; };
-
-/ {
-	model = "schindler,cm5200";
-	compatible = "schindler,cm5200";
-
-	soc5200@f0000000 {
-		can@900 {
-			status = "disabled";
-		};
-
-		can@980 {
-			status = "disabled";
-		};
-
-		psc@2000 {		// PSC1
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2200 {		// PSC2
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2400 {		// PSC3
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2600 {		// PSC4
-			status = "disabled";
-		};
-
-		psc@2800 {		// PSC5
-			status = "disabled";
-		};
-
-		psc@2c00 {		// PSC6
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		ata@3a00 {
-			status = "disabled";
-		};
-
-		i2c@3d00 {
-			status = "disabled";
-		};
-
-	};
-
-	pci@f0000d00 {
-		status = "disabled";
-	};
-
-	localbus {
-		// 16-bit flash device at LocalPlus Bus CS0
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x2000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-		};
-	};
-};
diff --git a/src/powerpc/currituck.dts b/src/powerpc/currituck.dts
deleted file mode 100644
index d2c8a872308e..000000000000
--- a/src/powerpc/currituck.dts
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Device Tree Source for IBM Embedded PPC 476 Platform
- *
- * Copyright © 2011 Tony Breeds IBM Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/memreserve/ 0x01f00000 0x00100000;	// spin table
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	model = "ibm,currituck";
-	compatible = "ibm,currituck";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		serial0 = &UART0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,476";
-			reg = <0>;
-			clock-frequency = <1600000000>; // 1.6 GHz
-			timebase-frequency = <100000000>; // 100Mhz
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			status = "ok";
-		};
-		cpu@1 {
-			device_type = "cpu";
-			model = "PowerPC,476";
-			reg = <1>;
-			clock-frequency = <1600000000>; // 1.6 GHz
-			timebase-frequency = <100000000>; // 100Mhz
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			status = "disabled";
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x01f00000>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
-	};
-
-	MPIC: interrupt-controller {
-		compatible = "chrp,open-pic";
-		interrupt-controller;
-		dcr-reg = <0xffc00000 0x00040000>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-
-	};
-
-	plb {
-		compatible = "ibm,plb6";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		clock-frequency = <200000000>; // 200Mhz
-
-		POB0: opb {
-			compatible = "ibm,opb-4xx", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/* Wish there was a nicer way of specifying a full
-			 * 32-bit range
-			 */
-			ranges = <0x00000000 0x00000200 0x00000000 0x80000000
-				  0x80000000 0x00000200 0x80000000 0x80000000>;
-			clock-frequency = <100000000>;
-
-			UART0: serial@10000000 {
-				device_type = "serial";
-				compatible = "ns16750", "ns16550";
-				reg = <0x10000000 0x00000008>;
-				virtual-reg = <0xe1000000>;
-				clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
-				current-speed = <115200>;
-				interrupt-parent = <&MPIC>;
-				interrupts = <34 2>;
-			};
-
-			FPGA0: fpga@50000000 {
-				compatible = "ibm,currituck-fpga";
-				reg = <0x50000000 0x4>;
-			};
-
-			IIC0: i2c@00000000 {
-				compatible = "ibm,iic-currituck", "ibm,iic";
-				reg = <0x0 0x00000014>;
-				interrupt-parent = <&MPIC>;
-				interrupts = <79 2>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-                                rtc@68 {
-                                        compatible = "stm,m41t80", "m41st85";
-                                        reg = <0x68>;
-                                };
-			};
-		};
-
-		PCIE0: pciex@10100000000 {		// 4xGBIF1
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0x00000101 0x00000000 0x0 0x10000000		/* Config space access */
-			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
-			dcr-reg = <0x80 0x20>;
-
-//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
-			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
-			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
-
-			/* Inbound starting at 0 to memsize filled in by zImage */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
-
-			/* This drives busses 0 to 0xf */
-			bus-range = <0x0 0xf>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
-				0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
-				0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
-				0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
-		};
-
-		PCIE1: pciex@30100000000 {		// 4xGBIF0
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0x00000301 0x00000000 0x0 0x10000000		/* Config space access */
-			       0x00000300 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
-			dcr-reg = <0x60 0x20>;
-
-			ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
-			          0x01000000 0x0        0x0        0x00000340 0x0        0x0 0x00010000>;
-
-			/* Inbound starting at 0 to memsize filled in by zImage */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
-
-			/* This drives busses 0 to 0xf */
-			bus-range = <0x0 0xf>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
-				0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
-				0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
-				0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
-		};
-
-		PCIE2: pciex@38100000000 {		// 2xGBIF0
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
-			primary;
-			port = <0x2>; /* port number */
-			reg = <0x00000381 0x00000000 0x0 0x10000000		/* Config space access */
-			       0x00000380 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
-			dcr-reg = <0xA0 0x20>;
-
-			ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
-			          0x01000000 0x0        0x0        0x000003C0 0x0        0x0 0x00010000>;
-
-			/* Inbound starting at 0 to memsize filled in by zImage */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
-
-			/* This drives busses 0 to 0xf */
-			bus-range = <0x0 0xf>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
-				0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
-				0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
-				0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
-		};
-
-	};
-
-	chosen {
-		linux,stdout-path = &UART0;
-	};
-};
diff --git a/src/powerpc/digsy_mtc.dts b/src/powerpc/digsy_mtc.dts
deleted file mode 100644
index 955bff629df3..000000000000
--- a/src/powerpc/digsy_mtc.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Digsy MTC board Device Tree Source
- *
- * Copyright (C) 2009 Semihalf
- *
- * Based on the CM5200 by M. Balakowicz
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 { gpio-controller; fsl,has-wdt; };
-&gpt1 { gpio-controller; };
-
-/ {
-	model = "intercontrol,digsy-mtc";
-	compatible = "intercontrol,digsy-mtc";
-
-	memory {
-		reg = <0x00000000 0x02000000>;	// 32MB
-	};
-
-	soc5200@f0000000 {
-		rtc@800 {
-			status = "disabled";
-		};
-
-		spi@f00 {
-			msp430@0 {
-				compatible = "spidev";
-				spi-max-frequency = <32000>;
-				reg = <0>;
-			};
-		};
-
-		psc@2000 {		// PSC1
-			status = "disabled";
-		};
-
-		psc@2200 {		// PSC2
-			status = "disabled";
-		};
-
-		psc@2400 {		// PSC3
-			status = "disabled";
-		};
-
-		psc@2600 {		// PSC4
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2800 {		// PSC5
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2c00 {		// PSC6
-			status = "disabled";
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		i2c@3d00 {
-			eeprom@50 {
-				compatible = "at,24c08";
-				reg = <0x50>;
-			};
-
-			rtc@56 {
-				compatible = "mc,rv3029c2";
-				reg = <0x56>;
-			};
-
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-			};
-		};
-
-		i2c@3d40 {
-			status = "disabled";
-		};
-	};
-
-	pci@f0000d00 {
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
-				 0xc000 0 0 2 &mpc5200_pic 0 0 3
-				 0xc000 0 0 3 &mpc5200_pic 0 0 3
-				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
-	};
-
-	localbus {
-		ranges = <0 0 0xff000000 0x1000000
-			  4 0 0x60000000 0x0001000>;
-
-		// 16-bit flash device at LocalPlus Bus CS0
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x1000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			partition@0 {
-				label = "kernel";
-				reg = <0x0 0x00200000>;
-			};
-			partition@200000 {
-				label = "root";
-				reg = <0x00200000 0x00300000>;
-			};
-			partition@500000 {
-				label = "user";
-				reg = <0x00500000 0x00a00000>;
-			};
-			partition@f00000 {
-				label = "u-boot";
-				reg = <0x00f00000 0x100000>;
-			};
-		};
-
-		can@4,0 {
-			compatible = "nxp,sja1000";
-			reg = <4 0x000 0x80>;
-			nxp,external-clock-frequency = <24000000>;
-			interrupts = <1 2 3>; // Level-low
-		};
-
-		can@4,100 {
-			compatible = "nxp,sja1000";
-			reg = <4 0x100 0x80>;
-			nxp,external-clock-frequency = <24000000>;
-			interrupts = <1 2 3>;  // Level-low
-		};
-
-		serial@4,200 {
-			compatible = "nxp,sc28l92";
-			reg = <4 0x200 0x10>;
-			interrupts = <1 3 3>;
-		};
-	};
-};
diff --git a/src/powerpc/ebony.dts b/src/powerpc/ebony.dts
deleted file mode 100644
index ec2d142291b4..000000000000
--- a/src/powerpc/ebony.dts
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * Device Tree Source for IBM Ebony
- *
- * Copyright (c) 2006, 2007 IBM Corp.
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
- *
- * FIXME: Draft only!
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "ibm,ebony";
-	compatible = "ibm,ebony";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,440GP";
-			reg = <0x00000000>;
-			clock-frequency = <0>; // Filled in by zImage
-			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>; /* 32 kB */
-			d-cache-size = <32768>; /* 32 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-440gp", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-440gp", "ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	CPC0: cpc {
-		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
-		// FIXME: anything else?
-	};
-
-	plb {
-		compatible = "ibm,plb-440gp", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; // Filled in by zImage
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-440gp";
-			dcr-reg = <0x010 0x002>;
-			// FIXME: anything else?
-		};
-
-		SRAM0: sram {
-			compatible = "ibm,sram-440gp";
-			dcr-reg = <0x020 0x008 0x00a 0x001>;
-		};
-
-		DMA0: dma {
-			// FIXME: ???
-			compatible = "ibm,dma-440gp";
-			dcr-reg = <0x100 0x027>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <4>;
-			num-rx-chans = <4>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					 /*SERR*/  0x2 &UIC1 0x0 0x4
-					 /*TXDE*/  0x3 &UIC1 0x1 0x4
-					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-440gp", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/* Wish there was a nicer way of specifying a full 32-bit
-			   range */
-			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
-				  0x80000000 0x00000001 0x80000000 0x80000000>;
-			dcr-reg = <0x090 0x00b>;
-			interrupt-parent = <&UIC1>;
-			interrupts = <0x7 0x4>;
-			clock-frequency = <0>; // Filled in by zImage
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; // Filled in by zImage
-				// ranges property is supplied by zImage
-				// based on firmware's configuration of the
-				// EBC bridge
-				interrupts = <0x5 0x4>;
-				interrupt-parent = <&UIC1>;
-
-				small-flash@0,80000 {
-					compatible = "jedec-flash";
-					bank-width = <1>;
-					reg = <0x00000000 0x00080000 0x00080000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "OpenBIOS";
-						reg = <0x00000000 0x00080000>;
-						read-only;
-					};
-				};
-
-				nvram@1,0 {
-					/* NVRAM & RTC */
-					compatible = "ds1743-nvram";
-					#bytes = <0x2000>;
-					reg = <0x00000001 0x00000000 0x00002000>;
-				};
-
-				large-flash@2,0 {
-					compatible = "jedec-flash";
-					bank-width = <1>;
-					reg = <0x00000002 0x00000000 0x00400000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "fs";
-						reg = <0x00000000 0x00380000>;
-					};
-					partition@380000 {
-						label = "firmware";
-						reg = <0x00380000 0x00080000>;
-					};
-				};
-
-				ir@3,0 {
-					reg = <0x00000003 0x00000000 0x00000010>;
-				};
-
-				fpga@7,0 {
-					compatible = "Ebony-FPGA";
-					reg = <0x00000007 0x00000000 0x00000010>;
-					virtual-reg = <0xe8300000>;
-				};
-			};
-
-			UART0: serial@40000200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x40000200 0x00000008>;
-				virtual-reg = <0xe0000200>;
-				clock-frequency = <11059200>;
-				current-speed = <9600>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			UART1: serial@40000300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x40000300 0x00000008>;
-				virtual-reg = <0xe0000300>;
-				clock-frequency = <11059200>;
-				current-speed = <9600>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@40000400 {
-				/* FIXME */
-				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <0x40000400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-			IIC1: i2c@40000500 {
-				/* FIXME */
-				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <0x40000500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x3 0x4>;
-			};
-
-			GPIO0: gpio@40000700 {
-				/* FIXME */
-				compatible = "ibm,gpio-440gp";
-				reg = <0x40000700 0x00000020>;
-			};
-
-			ZMII0: emac-zmii@40000780 {
-				compatible = "ibm,zmii-440gp", "ibm,zmii";
-				reg = <0x40000780 0x0000000c>;
-			};
-
-			EMAC0: ethernet@40000800 {
-				device_type = "network";
-				compatible = "ibm,emac-440gp", "ibm,emac";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1c 0x4 0x1d 0x4>;
-				reg = <0x40000800 0x00000070>;
-				local-mac-address = [000000000000]; // Filled in by zImage
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0 1>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000001>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <0>;
-			};
-			EMAC1: ethernet@40000900 {
-				device_type = "network";
-				compatible = "ibm,emac-440gp", "ibm,emac";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1e 0x4 0x1f 0x4>;
-				reg = <0x40000900 0x00000070>;
-				local-mac-address = [000000000000]; // Filled in by zImage
-				mal-device = <&MAL0>;
-				mal-tx-channel = <2 3>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000001>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <1>;
-			};
-
-
-			GPT0: gpt@40000a00 {
-				/* FIXME */
-				reg = <0x40000a00 0x000000d4>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
-			};
-
-		};
-
-		PCIX0: pci@20ec00000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
-			primary;
-			reg = <0x00000002 0x0ec00000 0x00000008	/* Config space access */
-			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
-			       0x00000002 0x0ed00000 0x00000004     /* Special cycles */
-			       0x00000002 0x0ec80000 0x000000f0	/* Internal registers */
-			       0x00000002 0x0ec80100 0x000000fc>;	/* Internal messaging registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* Ebony has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
-			interrupt-map = <
-				/* IDSEL 1 */
-				0x800 0x0 0x0 0x0 &UIC0 0x17 0x8
-
-				/* IDSEL 2 */
-				0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8
-
-				/* IDSEL 3 */
-				0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8
-
-				/* IDSEL 4 */
-				0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8
-			>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@40000200";
-	};
-};
diff --git a/src/powerpc/eiger.dts b/src/powerpc/eiger.dts
deleted file mode 100644
index 48bcf7187924..000000000000
--- a/src/powerpc/eiger.dts
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX)
- *
- * Copyright 2009 AMCC (AppliedMicro) <ttnguyen@amcc.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "amcc,eiger";
-	compatible = "amcc,eiger";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		ethernet2 = &EMAC2;
-		ethernet3 = &EMAC3;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,460SX";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-460sx","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-460sx","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-460sx","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC3: interrupt-controller3 {
-		compatible = "ibm,uic-460sx","ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x0f0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-460sx";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-460sx";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	plb {
-		compatible = "ibm,plb-460sx", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
-			dcr-reg = <0x180 0x62>;
-			num-tx-chans = <4>;
-			num-rx-chans = <32>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&UIC1>;
-			interrupts = <	/*TXEOB*/ 0x6 0x4
-					/*RXEOB*/ 0x7 0x4
-					/*SERR*/  0x1 0x4
-					/*TXDE*/  0x2 0x4
-					/*RXDE*/  0x3 0x4
-					/*COAL TX0*/ 0x18 0x2
-					/*COAL TX1*/ 0x19 0x2
-					/*COAL TX2*/ 0x1a 0x2
-					/*COAL TX3*/ 0x1b 0x2
-					/*COAL RX0*/ 0x1c 0x2
-					/*COAL RX1*/ 0x1d 0x2
-					/*COAL RX2*/ 0x1e 0x2
-					/*COAL RX3*/ 0x1f 0x2>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-460sx", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-460sx", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x6 0x4>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					/* reg property is supplied in by U-Boot */
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x001e0000>;
-					};
-					partition@1e0000 {
-						label = "dtb";
-						reg = <0x001e0000 0x00020000>;
-					};
-					partition@200000 {
-						label = "ramdisk";
-						reg = <0x00200000 0x01400000>;
-					};
-					partition@1600000 {
-						label = "jffs2";
-						reg = <0x01600000 0x00400000>;
-					};
-					partition@1a00000 {
-						label = "user";
-						reg = <0x01a00000 0x02560000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-
-				ndfc@1,0 {
-					compatible = "ibm,ndfc";
-					/* reg property is supplied by U-boot */
-					ccr = <0x00003000>;
-					bank-settings = <0x80002222>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					nand {
-						#address-cells = <1>;
-						#size-cells = <1>;
-						partition@0 {
-							label = "uboot";
-							reg = <0x00000000 0x00200000>;
-						};
-						partition@200000 {
-							label = "uboot-environment";
-							reg = <0x00200000 0x00100000>;
-						};
-						partition@300000 {
-							label = "linux";
-							reg = <0x00300000 0x00300000>;
-						};
-						partition@600000 {
-							label = "root-file-system";
-							reg = <0x00600000 0x01900000>;
-						};
-						partition@1f00000 {
-							label = "device-tree";
-							reg = <0x01f00000 0x00020000>;
-						};
-						partition@1f20000 {
-							label = "data";
-							reg = <0x01f20000 0x060E0000>;
-						};
-					};
-				};
-			};
-
-			UART0: serial@ef600200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600200 0x00000008>;
-				virtual-reg = <0xef600200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600400 {
-				compatible = "ibm,iic-460sx", "ibm,iic";
-				reg = <0xef600400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				index = <0>;
-			};
-
-			IIC1: i2c@ef600500 {
-				compatible = "ibm,iic-460sx", "ibm,iic";
-				reg = <0xef600500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x3 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				index = <1>;
-			};
-
-			RGMII0: emac-rgmii@ef600900 {
-				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
-				reg = <0xef600900 0x00000008>;
-				has-mdio;
-			};
-
-			RGMII1: emac-rgmii@ef600920 {
-				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
-				reg = <0xef600920 0x00000008>;
-				has-mdio;
-			};
-
-			TAH0: emac-tah@ef600e50 {
-				compatible = "ibm,tah-460sx", "ibm,tah";
-				reg = <0xef600e50 0x00000030>;
-			};
-
-			TAH1: emac-tah@ef600f50 {
-				compatible = "ibm,tah-460sx", "ibm,tah";
-				reg = <0xef600f50 0x00000030>;
-			};
-
-			EMAC0: ethernet@ef600a00 {
-				device_type = "network";
-				compatible = "ibm,emac-460sx", "ibm,emac4";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
-						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
-				reg = <0xef600a00 0x00000070>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				tah-device = <&TAH0>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600b00 {
-				device_type = "network";
-				compatible = "ibm,emac-460sx", "ibm,emac4";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4
-						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
-				reg = <0xef600b00 0x00000070>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <8>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				tah-device = <&TAH1>;
-				tah-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-
-			EMAC2: ethernet@ef600c00 {
-				device_type = "network";
-				compatible = "ibm,emac-460sx", "ibm,emac4";
-				interrupt-parent = <&EMAC2>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x15 0x4
-						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
-				reg = <0xef600c00 0x00000070>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <2>;
-				mal-rx-channel = <16>;
-				cell-index = <2>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>; /* emac2&3 only */
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII1>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-
-			EMAC3: ethernet@ef600d00 {
-				device_type = "network";
-				compatible = "ibm,emac-460sx", "ibm,emac4";
-				interrupt-parent = <&EMAC3>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x16 0x4
-						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
-				reg = <0xef600d00 0x00000070>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <3>;
-				mal-rx-channel = <24>;
-				cell-index = <3>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>; /* emac2&3 only */
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII1>;
-				rgmii-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-		};
-
-	};
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600200";
-	};
-
-};
diff --git a/src/powerpc/ep405.dts b/src/powerpc/ep405.dts
deleted file mode 100644
index 53ef06cc2134..000000000000
--- a/src/powerpc/ep405.dts
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * Device Tree Source for EP405
- *
- * Copyright 2007 IBM Corp.
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "ep405";
-	compatible = "ep405";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405GP";
-			reg = <0x00000000>;
-			clock-frequency = <200000000>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>;
-			d-cache-size = <16384>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	plb {
-		compatible = "ibm,plb3";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL: mcmal {
-			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <1>;
-			num-rx-chans = <1>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <
-				0xb 0x4 /* TXEOB */
-				0xc 0x4 /* RXEOB */
-				0xa 0x4 /* SERR */
-				0xd 0x4 /* TXDE */
-				0xe 0x4 /* RXDE */>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405gp", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xef600000 0xef600000 0x00a00000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by zImage */
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <9600>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			UART1: serial@ef600400 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600400 0x00000008>;
-				virtual-reg = <0xef600400>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <9600>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC: i2c@ef600500 {
-				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <0xef600500 0x00000011>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			GPIO: gpio@ef600700 {
-				compatible = "ibm,gpio-405gp";
-				reg = <0xef600700 0x00000020>;
-			};
-
-			EMAC: ethernet@ef600800 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405gp", "ibm,emac";
-				interrupt-parent = <&UIC0>;
-				interrupts = <
-					0xf 0x4 /* Ethernet */
-					0x9 0x4 /* Ethernet Wake Up */>;
-				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <0xef600800 0x00000070>;
-				mal-device = <&MAL>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000000>;
-			};
-
-		};
-
-		EBC0: ebc {
-			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <0x012 0x002>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-
-
-			/* The ranges property is supplied by the bootwrapper
-			 * and is based on the firmware's configuration of the
-			 * EBC bridge
-			 */
-			clock-frequency = <0>; /* Filled in by zImage */
-
-			/* NVRAM and RTC */
-			nvrtc@4,200000 {
-				compatible = "ds1742";
-				reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */
-			};
-
-			/* "BCSR" CPLD contains a PCI irq controller */
-			bcsr@4,0 {
-				compatible = "ep405-bcsr";
-				reg = <0x00000004 0x00000000 0x00000010>;
-				interrupt-controller;
-				/* Routing table */
-				irq-routing = [	00	/* SYSERR */
-						01	/* STTM */
-						01	/* RTC */
-						01	/* FENET */
-						02	/* NB PCIIRQ mux ? */
-						03	/* SB Winbond 8259 ? */
-						04	/* Serial Ring */
-						05	/* USB (ep405pc) */
-						06	/* XIRQ 0 */
-						06	/* XIRQ 1 */
-						06	/* XIRQ 2 */
-						06	/* XIRQ 3 */
-						06	/* XIRQ 4 */
-						06	/* XIRQ 5 */
-						06	/* XIRQ 6 */
-						07];	/* Reserved */
-			};
-		};
-
-		PCI0: pci@ec000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
-			primary;
-			reg = <0xeec00000 0x00000008	/* Config space access */
-			       0xeed80000 0x00000004	/* IACK */
-			       0xeed80000 0x00000004	/* Special cycle */
-			       0xef480000 0x00000040>;	/* Internal registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed. Chip supports a second
-			 * IO range but we don't use it for now
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
-				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* That's all I know about IRQs on that thing ... */
-			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
-			interrupt-map = <
-				/* USB */
-				0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */
-			>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};
diff --git a/src/powerpc/ep8248e.dts b/src/powerpc/ep8248e.dts
deleted file mode 100644
index 8b3a49f34f5a..000000000000
--- a/src/powerpc/ep8248e.dts
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * Device Tree for the Embedded Planet EP8248E board running PlanetCore.
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
-	model = "EP8248E";
-	compatible = "fsl,ep8248e";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		planetcore-SMC1 = &smc1;
-		planetcore-SCC1 = &scc1;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-		serial0 = &smc1;
-		serial1 = &scc1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8248@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <16384>;
-			i-cache-size = <16384>;
-			timebase-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	localbus@f0010100 {
-		compatible = "fsl,mpc8248-localbus",
-		             "fsl,pq2-localbus",
-		             "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xf0010100 0x40>;
-
-		ranges = <0 0 0xfc000000 0x04000000
-		          1 0 0xfa000000 0x00008000>;
-
-		flash@0,3800000 {
-			compatible = "cfi-flash";
-			reg = <0 0x3800000 0x800000>;
-			bank-width = <4>;
-			device-width = <2>;
-		};
-
-		bcsr@1,0 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <1 0 0x10>;
-			compatible = "fsl,ep8248e-bcsr";
-			ranges;
-
-			mdio {
-				compatible = "fsl,ep8248e-mdio-bitbang";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <1 8 1>;
-
-				PHY0: ethernet-phy@0 {
-					interrupt-parent = <&PIC>;
-					reg = <0>;
-				};
-
-				PHY1: ethernet-phy@1 {
-					interrupt-parent = <&PIC>;
-					reg = <1>;
-				};
-			};
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	soc@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus";
-		ranges = <0x00000000 0xf0000000 0x00053000>;
-
-		// Temporary until code stops depending on it.
-		device_type = "soc";
-
-		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <0xf0000000 0x00053000>;
-
-		cpm@119c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#interrupt-cells = <2>;
-			compatible = "fsl,mpc8248-cpm", "fsl,cpm2",
-			             "simple-bus";
-			reg = <0x119c0 0x30>;
-			ranges;
-
-			muram {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0 0x2000 0x9800 0x800>;
-				};
-			};
-
-			brg@119f0 {
-				compatible = "fsl,mpc8248-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x119f0 0x10 0x115f0 0x10>;
-			};
-
-			/* Monitor port/SMC1 */
-			smc1: serial@11a80 {
-				device_type = "serial";
-				compatible = "fsl,mpc8248-smc-uart",
-				             "fsl,cpm2-smc-uart";
-				reg = <0x11a80 0x20 0x87fc 2>;
-				interrupts = <4 8>;
-				interrupt-parent = <&PIC>;
-				fsl,cpm-brg = <7>;
-				fsl,cpm-command = <0x1d000000>;
-				linux,planetcore-label = "SMC1";
-			};
-
-			/* "Serial" port/SCC1 */
-			scc1: serial@11a00 {
-				device_type = "serial";
-				compatible = "fsl,mpc8248-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x11a00 0x20 0x8000 0x100>;
-				interrupts = <40 8>;
-				interrupt-parent = <&PIC>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x00800000>;
-				linux,planetcore-label = "SCC1";
-			};
-
-			eth0: ethernet@11300 {
-				device_type = "network";
-				compatible = "fsl,mpc8248-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x11300 0x20 0x8400 0x100 0x11390 1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <32 8>;
-				interrupt-parent = <&PIC>;
-				phy-handle = <&PHY0>;
-				linux,network-index = <0>;
-				fsl,cpm-command = <0x12000300>;
-			};
-
-			eth1: ethernet@11320 {
-				device_type = "network";
-				compatible = "fsl,mpc8248-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <33 8>;
-				interrupt-parent = <&PIC>;
-				phy-handle = <&PHY1>;
-				linux,network-index = <1>;
-				fsl,cpm-command = <0x16200300>;
-			};
-
-			usb@11b60 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,mpc8248-usb",
-				             "fsl,cpm2-usb";
-				reg = <0x11b60 0x18 0x8b00 0x100>;
-				interrupt-parent = <&PIC>;
-				interrupts = <11 8>;
-				fsl,cpm-command = <0x2e600000>;
-			};
-		};
-
-		PIC: interrupt-controller@10c00 {
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0x10c00 0x80>;
-			compatible = "fsl,mpc8248-pic", "fsl,pq2-pic";
-		};
-	};
-};
diff --git a/src/powerpc/ep88xc.dts b/src/powerpc/ep88xc.dts
deleted file mode 100644
index 2aa5bf559645..000000000000
--- a/src/powerpc/ep88xc.dts
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * EP88xC Device Tree Source
- *
- * Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007,2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "EP88xC";
-	compatible = "fsl,ep88xc";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,885@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <16>;
-			i-cache-line-size = <16>;
-			d-cache-size = <8192>;
-			i-cache-size = <8192>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			interrupts = <15 2>;	// decrementer interrupt
-			interrupt-parent = <&PIC>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	localbus@fa200100 {
-		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xfa200100 0x40>;
-
-		ranges = <
-			0x0 0x0 0xfc000000 0x4000000
-			0x3 0x0 0xfa000000 0x1000000
-		>;
-
-		flash@0,2000000 {
-			compatible = "cfi-flash";
-			reg = <0x0 0x2000000 0x2000000>;
-			bank-width = <4>;
-			device-width = <2>;
-		};
-
-		board-control@3,400000 {
-			reg = <0x3 0x400000 0x10>;
-			compatible = "fsl,ep88xc-bcsr";
-		};
-	};
-
-	soc@fa200000 {
-		compatible = "fsl,mpc885", "fsl,pq1-soc";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xfa200000 0x4000>;
-		bus-frequency = <0>;
-
-		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <0xfa200000 0x4000>;
-
-		mdio@e00 {
-			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <0xe00 0x188>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			PHY0: ethernet-phy@0 {
-				reg = <0x0>;
-			};
-
-			PHY1: ethernet-phy@1 {
-				reg = <0x1>;
-			};
-		};
-
-		ethernet@e00 {
-			device_type = "network";
-			compatible = "fsl,mpc885-fec-enet",
-			             "fsl,pq1-fec-enet";
-			reg = <0xe00 0x188>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <3 1>;
-			interrupt-parent = <&PIC>;
-			phy-handle = <&PHY0>;
-			linux,network-index = <0>;
-		};
-
-		ethernet@1e00 {
-			device_type = "network";
-			compatible = "fsl,mpc885-fec-enet",
-			             "fsl,pq1-fec-enet";
-			reg = <0x1e00 0x188>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <7 1>;
-			interrupt-parent = <&PIC>;
-			phy-handle = <&PHY1>;
-			linux,network-index = <1>;
-		};
-
-		PIC: interrupt-controller@0 {
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x0 0x24>;
-			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
-		};
-
-		pcmcia@80 {
-			#address-cells = <3>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			compatible = "fsl,pq-pcmcia";
-			device_type = "pcmcia";
-			reg = <0x80 0x80>;
-			interrupt-parent = <&PIC>;
-			interrupts = <13 1>;
-		};
-
-		cpm@9c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
-			command-proc = <0x9c0>;
-			interrupts = <0>;	// cpm error interrupt
-			interrupt-parent = <&CPM_PIC>;
-			reg = <0x9c0 0x40>;
-			ranges;
-
-			muram@2000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x2000 0x2000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x1c00>;
-				};
-			};
-
-			brg@9f0 {
-				compatible = "fsl,mpc885-brg",
-				             "fsl,cpm1-brg",
-				             "fsl,cpm-brg";
-				reg = <0x9f0 0x10>;
-			};
-
-			CPM_PIC: interrupt-controller@930 {
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupts = <5 2 0 2>;
-				interrupt-parent = <&PIC>;
-				reg = <0x930 0x20>;
-				compatible = "fsl,mpc885-cpm-pic",
-				             "fsl,cpm1-pic";
-			};
-
-			// MON-1
-			serial@a80 {
-				device_type = "serial";
-				compatible = "fsl,mpc885-smc-uart",
-				             "fsl,cpm1-smc-uart";
-				reg = <0xa80 0x10 0x3e80 0x40>;
-				interrupts = <4>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x90>;
-				linux,planetcore-label = "SMC1";
-			};
-
-			// SER-1
-			serial@a20 {
-				device_type = "serial";
-				compatible = "fsl,mpc885-scc-uart",
-				             "fsl,cpm1-scc-uart";
-				reg = <0xa20 0x20 0x3d00 0x80>;
-				interrupts = <29>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0x40>;
-				linux,planetcore-label = "SCC2";
-			};
-
-			usb@a00 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,mpc885-usb",
-				             "fsl,cpm1-usb";
-				reg = <0xa00 0x18 0x1c00 0x80>;
-				interrupt-parent = <&CPM_PIC>;
-				interrupts = <30>;
-				fsl,cpm-command = <0000>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/fsl/b4420si-post.dtsi b/src/powerpc/fsl/b4420si-post.dtsi
deleted file mode 100644
index d67894459ac8..000000000000
--- a/src/powerpc/fsl/b4420si-post.dtsi
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * B4420 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of
- * this software, even if advised of the possibility of such damage.
- */
-
-/include/ "b4si-post.dtsi"
-
-/* controller at 0x200000 */
-&pci0 {
-	compatible = "fsl,b4420-pcie", "fsl,qoriq-pcie-v2.4";
-};
-
-&dcsr {
-	dcsr-epu@0 {
-		compatible = "fsl,b4420-dcsr-epu", "fsl,dcsr-epu";
-	};
-	dcsr-npc {
-		compatible = "fsl,b4420-dcsr-cnpc", "fsl,dcsr-cnpc";
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,b4420-dcsr-dpaa", "fsl,dcsr-dpaa";
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,b4420-dcsr-ocn", "fsl,dcsr-ocn";
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,b4420-dcsr-nal", "fsl,dcsr-nal";
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,b4420-dcsr-rcpm", "fsl,dcsr-rcpm";
-	};
-	dcsr-snpc@30000 {
-		compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc";
-	};
-	dcsr-snpc@31000 {
-		compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc";
-	};
-	dcsr-cpu-sb-proxy@108000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x108000 0x1000 0x109000 0x1000>;
-	};
-};
-
-&soc {
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,b4420-l3-cache-controller", "cache";
-	};
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-2.0";
-			clock-output-names = "sysclk";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				<&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux0";
-		};
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0";
-	};
-
-	L2: l2-cache-controller@c20000 {
-		compatible = "fsl,b4420-l2-cache-controller";
-	};
-};
diff --git a/src/powerpc/fsl/b4420si-pre.dtsi b/src/powerpc/fsl/b4420si-pre.dtsi
deleted file mode 100644
index 338af7e39dd9..000000000000
--- a/src/powerpc/fsl/b4420si-pre.dtsi
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * B4420 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of
- * this software, even if advised of the possibility of such damage.
- */
-
-/dts-v1/;
-
-/include/ "e6500_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,B4420";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e6500@0 {
-			device_type = "cpu";
-			reg = <0 1>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu1: PowerPC,e6500@2 {
-			device_type = "cpu";
-			reg = <2 3>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/b4860si-post.dtsi b/src/powerpc/fsl/b4860si-post.dtsi
deleted file mode 100644
index 582381dba1d7..000000000000
--- a/src/powerpc/fsl/b4860si-post.dtsi
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * B4860 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "b4si-post.dtsi"
-
-/* controller at 0x200000 */
-&pci0 {
-	compatible = "fsl,b4860-pcie", "fsl,qoriq-pcie-v2.4";
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <16 2 1 20>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	fsl,iommu-parent = <&pamu0>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
-	};
-
-	port2 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <2>;
-		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
-	};
-};
-
-&dcsr {
-	dcsr-epu@0 {
-		compatible = "fsl,b4860-dcsr-epu", "fsl,dcsr-epu";
-	};
-	dcsr-npc {
-		compatible = "fsl,b4860-dcsr-cnpc", "fsl,dcsr-cnpc";
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,b4860-dcsr-dpaa", "fsl,dcsr-dpaa";
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,b4860-dcsr-ocn", "fsl,dcsr-ocn";
-	};
-	dcsr-ddr@13000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr2>;
-		reg = <0x13000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,b4860-dcsr-nal", "fsl,dcsr-nal";
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,b4860-dcsr-rcpm", "fsl,dcsr-rcpm";
-	};
-	dcsr-snpc@30000 {
-		compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc";
-	};
-	dcsr-snpc@31000 {
-		compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc";
-	};
-	dcsr-cpu-sb-proxy@108000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x108000 0x1000 0x109000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@110000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu2>;
-		reg = <0x110000 0x1000 0x111000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@118000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu3>;
-		reg = <0x118000 0x1000 0x119000 0x1000>;
-	};
-};
-
-&soc {
-	ddr2: memory-controller@9000 {
-		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-		reg = <0x9000 0x1000>;
-		interrupts = <16 2 1 9>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,b4860-l3-cache-controller", "cache";
-	};
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-2.0";
-			clock-output-names = "sysclk";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				<&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux0";
-		};
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0";
-	};
-
-	L2: l2-cache-controller@c20000 {
-		compatible = "fsl,b4860-l2-cache-controller";
-	};
-};
diff --git a/src/powerpc/fsl/b4860si-pre.dtsi b/src/powerpc/fsl/b4860si-pre.dtsi
deleted file mode 100644
index 1948f73fd26b..000000000000
--- a/src/powerpc/fsl/b4860si-pre.dtsi
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * B4860 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e6500_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,B4860";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e6500@0 {
-			device_type = "cpu";
-			reg = <0 1>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu1: PowerPC,e6500@2 {
-			device_type = "cpu";
-			reg = <2 3>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu2: PowerPC,e6500@4 {
-			device_type = "cpu";
-			reg = <4 5>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu3: PowerPC,e6500@6 {
-			device_type = "cpu";
-			reg = <6 7>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/b4si-post.dtsi b/src/powerpc/fsl/b4si-post.dtsi
deleted file mode 100644
index 1a54ba71f685..000000000000
--- a/src/powerpc/fsl/b4si-post.dtsi
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * B4420 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of
- * this software, even if advised of the possibility of such damage.
- */
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <25 2 0 0>;
-};
-
-/* controller at 0x200000 */
-&pci0 {
-	compatible = "fsl,b4-pcie", "fsl,qoriq-pcie-v2.4";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	interrupts = <20 2 0 0>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		reg = <0 0 0 0 0>;
-		interrupts = <20 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 40 1 0 0
-			0000 0 0 2 &mpic 1 1 0 0
-			0000 0 0 3 &mpic 2 1 0 0
-			0000 0 0 4 &mpic 3 1 0 0
-			>;
-	};
-};
-
-&dcsr {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,dcsr", "simple-bus";
-
-	dcsr-epu@0 {
-		compatible = "fsl,b4-dcsr-epu", "fsl,dcsr-epu";
-		interrupts = <52 2 0 0
-			      84 2 0 0
-			      85 2 0 0
-			      94 2 0 0
-			      95 2 0 0>;
-		reg = <0x0 0x1000>;
-	};
-	dcsr-npc {
-		compatible = "fsl,b4-dcsr-cnpc", "fsl,dcsr-cnpc";
-		reg = <0x1000 0x1000 0x1002000 0x10000>;
-	};
-	dcsr-nxc@2000 {
-		compatible = "fsl,dcsr-nxc";
-		reg = <0x2000 0x1000>;
-	};
-	dcsr-corenet {
-		compatible = "fsl,dcsr-corenet";
-		reg = <0x8000 0x1000 0x1A000 0x1000>;
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,b4-dcsr-dpaa", "fsl,dcsr-dpaa";
-		reg = <0x9000 0x1000>;
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,b4-dcsr-ocn", "fsl,dcsr-ocn";
-		reg = <0x11000 0x1000>;
-	};
-	dcsr-ddr@12000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr1>;
-		reg = <0x12000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,b4-dcsr-nal", "fsl,dcsr-nal";
-		reg = <0x18000 0x1000>;
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,b4-dcsr-rcpm", "fsl,dcsr-rcpm";
-		reg = <0x22000 0x1000>;
-	};
-	dcsr-snpc@30000 {
-		compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc";
-		reg = <0x30000 0x1000 0x1022000 0x10000>;
-	};
-	dcsr-snpc@31000 {
-		compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc";
-		reg = <0x31000 0x1000 0x1042000 0x10000>;
-	};
-	dcsr-cpu-sb-proxy@100000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu0>;
-		reg = <0x100000 0x1000 0x101000 0x1000>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 2>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 8>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,b4-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000>;
-		interrupts = <16 2 1 4>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 0>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible =  "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x4000>;
-		fsl,portid-mapping = <0x8000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 1>;
-
-
-		/* PCIe, DMA, SRIO */
-		pamu0: pamu@0 {
-			reg = <0 0x1000>;
-			fsl,primary-cache-geometry = <8 1>;
-			fsl,secondary-cache-geometry = <32 2>;
-		};
-
-		/* AXI2, Maple */
-		pamu1: pamu@1000 {
-			reg = <0x1000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <32 2>;
-		};
-
-		/* Q/BMan */
-		pamu2: pamu@2000 {
-			reg = <0x2000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <32 2>;
-		};
-
-		/* AXI1, FMAN */
-		pamu3: pamu@3000 {
-			reg = <0x3000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <32 2>;
-		};
-	};
-
-/include/ "qoriq-mpic4.3.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,b4-device-config";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		fsl,liodn-bits = <12>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
-		reg = <0xe1000 0x1000>;
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0";
-		reg = <0xe2000 0x1000>;
-	};
-
-/include/ "elo3-dma-0.dtsi"
-	dma@100300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
-	};
-
-/include/ "elo3-dma-1.dtsi"
-	dma@101300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
-	};
-
-/include/ "qonverge-usb2-dr-0.dtsi"
-	usb0: usb@210000 {
-		compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
-	};
-
-/include/ "qoriq-espi-0.dtsi"
-	spi@110000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "qoriq-esdhc-0.dtsi"
-	sdhc@114000 {
-		sdhci,auto-cmd12;
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
-	};
-
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-sec5.3-0.dtsi"
-
-	L2: l2-cache-controller@c20000 {
-		compatible = "fsl,b4-l2-cache-controller";
-		reg = <0xc20000 0x1000>;
-		next-level-cache = <&cpc>;
-	};
-};
diff --git a/src/powerpc/fsl/bsc9131si-post.dtsi b/src/powerpc/fsl/bsc9131si-post.dtsi
deleted file mode 100644
index 0c0efa94cfb4..000000000000
--- a/src/powerpc/fsl/bsc9131si-post.dtsi
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * BSC9131 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <16 2 0 0 20 2 0 0>;
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,bsc9131-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,bsc9131-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,bsc9131-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-	i2c@3000 {
-		interrupts = <17 2 0 0>;
-	};
-
-/include/ "pq3-i2c-1.dtsi"
-	i2c@3100 {
-		interrupts = <17 2 0 0>;
-	};
-
-/include/ "pq3-duart-0.dtsi"
-	serial0: serial@4500 {
-		interrupts = <18 2 0 0>;
-	};
-
-	serial1: serial@4600 {
-		interrupts = <18 2 0 0 >;
-	};
-/include/ "pq3-espi-0.dtsi"
-	spi0: spi@7000 {
-		fsl,espi-num-chipselects = <1>;
-		interrupts = <22 0x2 0 0>;
-	};
-
-/include/ "pq3-gpio-0.dtsi"
-	gpio-controller@f000 {
-		interrupts = <19 0x2 0 0>;
-		};
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,bsc9131-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x40000>; // L2,256K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-
-dma@21300 {
-
-	dma-channel@0 {
-		interrupts = <62 2 0 0>;
-	};
-
-	dma-channel@80 {
-		interrupts = <63 2 0 0>;
-	};
-
-	dma-channel@100 {
-		interrupts = <64 2 0 0>;
-	};
-
-	dma-channel@180 {
-		interrupts = <65 2 0 0>;
-	};
-};
-
-/include/ "pq3-usb2-dr-0.dtsi"
-usb@22000 {
-	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
-	interrupts = <40 0x2 0 0>;
-};
-
-/include/ "pq3-esdhc-0.dtsi"
-	sdhc@2e000 {
-		sdhci,auto-cmd12;
-		interrupts = <41 0x2 0 0>;
-	};
-
-/include/ "pq3-sec4.4-0.dtsi"
-crypto@30000 {
-	interrupts	 = <57 2 0 0>;
-
-	sec_jr0: jr@1000 {
-		interrupts	 = <58 2 0 0>;
-	};
-
-	sec_jr1: jr@2000 {
-		interrupts	 = <59 2 0 0>;
-	};
-
-	sec_jr2: jr@3000 {
-		interrupts	 = <60 2 0 0>;
-	};
-
-	sec_jr3: jr@4000 {
-		interrupts	 = <61 2 0 0>;
-	};
-};
-
-/include/ "pq3-mpic.dtsi"
-
-timer@41100 {
-	compatible = "fsl,mpic-v1.2-msgr", "fsl,mpic-msg";
-	reg = <0x41400 0x200>;
-	interrupts = <
-		0xb0 2
-		0xb1 2
-		0xb2 2
-		0xb3 2>;
-};
-
-/include/ "pq3-etsec2-0.dtsi"
-enet0: ethernet@b0000 {
-	queue-group@b0000 {
-		fsl,rx-bit-map = <0xff>;
-		fsl,tx-bit-map = <0xff>;
-		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
-	};
-};
-
-/include/ "pq3-etsec2-1.dtsi"
-enet1: ethernet@b1000 {
-	queue-group@b1000 {
-		fsl,rx-bit-map = <0xff>;
-		fsl,tx-bit-map = <0xff>;
-		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
-	};
-};
-
-global-utilities@e0000 {
-		compatible = "fsl,bsc9131-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
diff --git a/src/powerpc/fsl/bsc9131si-pre.dtsi b/src/powerpc/fsl/bsc9131si-pre.dtsi
deleted file mode 100644
index f6ec4a67560c..000000000000
--- a/src/powerpc/fsl/bsc9131si-pre.dtsi
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * BSC9131 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,BSC9131";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,BSC9131@0 {
-			device_type = "cpu";
-			compatible = "fsl,e500v2";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/bsc9132si-post.dtsi b/src/powerpc/fsl/bsc9132si-post.dtsi
deleted file mode 100644
index c72307198140..000000000000
--- a/src/powerpc/fsl/bsc9132si-post.dtsi
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * BSC9132 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2014 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	/* FIXME: Test whether interrupts are split */
-	interrupts = <16 2 0 0 20 2 0 0>;
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,bsc9132-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,bsc9132-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,bsc9132-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <16 2 1 8>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-	i2c@3000 {
-		interrupts = <17 2 0 0>;
-	};
-
-/include/ "pq3-i2c-1.dtsi"
-	i2c@3100 {
-		interrupts = <17 2 0 0>;
-	};
-
-/include/ "pq3-duart-0.dtsi"
-	serial0: serial@4500 {
-		interrupts = <18 2 0 0>;
-	};
-
-	serial1: serial@4600 {
-		interrupts = <18 2 0 0 >;
-	};
-/include/ "pq3-espi-0.dtsi"
-	spi0: spi@7000 {
-		fsl,espi-num-chipselects = <1>;
-		interrupts = <22 0x2 0 0>;
-	};
-
-/include/ "pq3-gpio-0.dtsi"
-	gpio-controller@f000 {
-		interrupts = <19 0x2 0 0>;
-		};
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,bsc9132-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x40000>; // L2,256K
-		interrupts = <16 2 1 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-
-dma@21300 {
-
-	dma-channel@0 {
-		interrupts = <62 2 0 0>;
-	};
-
-	dma-channel@80 {
-		interrupts = <63 2 0 0>;
-	};
-
-	dma-channel@100 {
-		interrupts = <64 2 0 0>;
-	};
-
-	dma-channel@180 {
-		interrupts = <65 2 0 0>;
-	};
-};
-
-/include/ "pq3-usb2-dr-0.dtsi"
-usb@22000 {
-	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
-	interrupts = <40 0x2 0 0>;
-};
-
-/include/ "pq3-esdhc-0.dtsi"
-	sdhc@2e000 {
-		fsl,sdhci-auto-cmd12;
-		interrupts = <41 0x2 0 0>;
-	};
-
-/include/ "pq3-sec4.4-0.dtsi"
-crypto@30000 {
-	interrupts	 = <57 2 0 0>;
-
-	sec_jr0: jr@1000 {
-		interrupts	 = <58 2 0 0>;
-	};
-
-	sec_jr1: jr@2000 {
-		interrupts	 = <59 2 0 0>;
-	};
-
-	sec_jr2: jr@3000 {
-		interrupts	 = <60 2 0 0>;
-	};
-
-	sec_jr3: jr@4000 {
-		interrupts	 = <61 2 0 0>;
-	};
-};
-
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-mpic-timer-B.dtsi"
-
-/include/ "pq3-etsec2-0.dtsi"
-enet0: ethernet@b0000 {
-	queue-group@b0000 {
-		fsl,rx-bit-map = <0xff>;
-		fsl,tx-bit-map = <0xff>;
-		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
-	};
-};
-
-/include/ "pq3-etsec2-1.dtsi"
-enet1: ethernet@b1000 {
-	queue-group@b1000 {
-		fsl,rx-bit-map = <0xff>;
-		fsl,tx-bit-map = <0xff>;
-		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
-	};
-};
-
-global-utilities@e0000 {
-		compatible = "fsl,bsc9132-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
diff --git a/src/powerpc/fsl/bsc9132si-pre.dtsi b/src/powerpc/fsl/bsc9132si-pre.dtsi
deleted file mode 100644
index 301a9dba5790..000000000000
--- a/src/powerpc/fsl/bsc9132si-pre.dtsi
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * BSC9132 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2014 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e500v2@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		cpu1: PowerPC,e500v2@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/c293si-post.dtsi b/src/powerpc/fsl/c293si-post.dtsi
deleted file mode 100644
index bd208320bff5..000000000000
--- a/src/powerpc/fsl/c293si-post.dtsi
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * C293 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <19 2 0 0>;
-};
-
-/* controller at 0xa000 */
-&pci0 {
-	compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,c293-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,c293-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-/include/ "pq3-espi-0.dtsi"
-	spi0: spi@7000 {
-		fsl,espi-num-chipselects = <1>;
-	};
-
-/include/ "pq3-gpio-0.dtsi"
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,c293-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x80000>; // L2,512K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-esdhc-0.dtsi"
-	sdhc@2e000 {
-		compatible = "fsl,c293-esdhc", "fsl,esdhc";
-		sdhci,auto-cmd12;
-	};
-
-	crypto@80000 {
-/include/ "qoriq-sec6.0-0.dtsi"
-	};
-
-	crypto@80000 {
-		reg = <0x80000 0x20000>;
-		ranges = <0x0 0x80000 0x20000>;
-
-		jr@1000{
-			interrupts = <45 2 0 0>;
-		};
-		jr@2000{
-			interrupts = <57 2 0 0>;
-		};
-	};
-
-	crypto@a0000 {
-/include/ "qoriq-sec6.0-0.dtsi"
-	};
-
-	crypto@a0000 {
-		reg = <0xa0000 0x20000>;
-		ranges = <0x0 0xa0000 0x20000>;
-
-		jr@1000{
-			interrupts = <49 2 0 0>;
-		};
-		jr@2000{
-			interrupts = <50 2 0 0>;
-		};
-	};
-
-	crypto@c0000 {
-/include/ "qoriq-sec6.0-0.dtsi"
-	};
-
-	crypto@c0000 {
-		reg = <0xc0000 0x20000>;
-		ranges = <0x0 0xc0000 0x20000>;
-
-		jr@1000{
-			interrupts = <55 2 0 0>;
-		};
-		jr@2000{
-			interrupts = <56 2 0 0>;
-		};
-	};
-
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-mpic-timer-B.dtsi"
-
-/include/ "pq3-etsec2-0.dtsi"
-	enet0: ethernet@b0000 {
-		queue-group@b0000 {
-			reg = <0x10000 0x1000>;
-			fsl,rx-bit-map = <0xff>;
-			fsl,tx-bit-map = <0xff>;
-		};
-	};
-
-/include/ "pq3-etsec2-1.dtsi"
-	enet1: ethernet@b1000 {
-		queue-group@b1000 {
-			reg = <0x11000 0x1000>;
-			fsl,rx-bit-map = <0xff>;
-			fsl,tx-bit-map = <0xff>;
-		};
-	};
-
-	global-utilities@e0000 {
-		compatible = "fsl,c293-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
diff --git a/src/powerpc/fsl/c293si-pre.dtsi b/src/powerpc/fsl/c293si-pre.dtsi
deleted file mode 100644
index 065049d76245..000000000000
--- a/src/powerpc/fsl/c293si-pre.dtsi
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * C293 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,C293";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,e500v2@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/e500mc_power_isa.dtsi b/src/powerpc/fsl/e500mc_power_isa.dtsi
deleted file mode 100644
index ea145c91cfbd..000000000000
--- a/src/powerpc/fsl/e500mc_power_isa.dtsi
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * e500mc Power ISA Device Tree Source (include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/ {
-	cpus {
-		power-isa-version = "2.06";
-		power-isa-b;		// Base
-		power-isa-e;		// Embedded
-		power-isa-atb;		// Alternate Time Base
-		power-isa-cs;		// Cache Specification
-		power-isa-ds;		// Decorated Storage
-		power-isa-e.ed;		// Embedded.Enhanced Debug
-		power-isa-e.pd;		// Embedded.External PID
-		power-isa-e.hv;		// Embedded.Hypervisor
-		power-isa-e.le;		// Embedded.Little-Endian
-		power-isa-e.pm;		// Embedded.Performance Monitor
-		power-isa-e.pc;		// Embedded.Processor Control
-		power-isa-ecl;		// Embedded Cache Locking
-		power-isa-exp;		// External Proxy
-		power-isa-fp;		// Floating Point
-		power-isa-fp.r;		// Floating Point.Record
-		power-isa-mmc;		// Memory Coherence
-		power-isa-scpm;		// Store Conditional Page Mobility
-		power-isa-wt;		// Wait
-		fsl,eref-deo;		// Data Cache Extended Operations
-		mmu-type = "power-embedded";
-	};
-};
diff --git a/src/powerpc/fsl/e500v2_power_isa.dtsi b/src/powerpc/fsl/e500v2_power_isa.dtsi
deleted file mode 100644
index f4928144d2c8..000000000000
--- a/src/powerpc/fsl/e500v2_power_isa.dtsi
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * e500v2 Power ISA Device Tree Source (include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/ {
-	cpus {
-		power-isa-version = "2.03";
-		power-isa-b;		// Base
-		power-isa-e;		// Embedded
-		power-isa-atb;		// Alternate Time Base
-		power-isa-cs;		// Cache Specification
-		power-isa-e.le;		// Embedded.Little-Endian
-		power-isa-e.pm;		// Embedded.Performance Monitor
-		power-isa-ecl;		// Embedded Cache Locking
-		power-isa-mmc;		// Memory Coherence
-		power-isa-sp;		// Signal Processing Engine
-		power-isa-sp.fd;	// SPE.Embedded Float Scalar Double
-		power-isa-sp.fs;	// SPE.Embedded Float Scalar Single
-		power-isa-sp.fv;	// SPE.Embedded Float Vector
-		mmu-type = "power-embedded";
-	};
-};
diff --git a/src/powerpc/fsl/e5500_power_isa.dtsi b/src/powerpc/fsl/e5500_power_isa.dtsi
deleted file mode 100644
index c254c981ae87..000000000000
--- a/src/powerpc/fsl/e5500_power_isa.dtsi
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * e5500 Power ISA Device Tree Source (include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/ {
-	cpus {
-		power-isa-version = "2.06";
-		power-isa-b;		// Base
-		power-isa-e;		// Embedded
-		power-isa-atb;		// Alternate Time Base
-		power-isa-cs;		// Cache Specification
-		power-isa-ds;		// Decorated Storage
-		power-isa-e.ed;		// Embedded.Enhanced Debug
-		power-isa-e.pd;		// Embedded.External PID
-		power-isa-e.hv;		// Embedded.Hypervisor
-		power-isa-e.le;		// Embedded.Little-Endian
-		power-isa-e.pm;		// Embedded.Performance Monitor
-		power-isa-e.pc;		// Embedded.Processor Control
-		power-isa-ecl;		// Embedded Cache Locking
-		power-isa-exp;		// External Proxy
-		power-isa-fp;		// Floating Point
-		power-isa-fp.r;		// Floating Point.Record
-		power-isa-mmc;		// Memory Coherence
-		power-isa-scpm;		// Store Conditional Page Mobility
-		power-isa-wt;		// Wait
-		power-isa-64;		// 64-bit
-		fsl,eref-deo;		// Data Cache Extended Operations
-		mmu-type = "power-embedded";
-	};
-};
diff --git a/src/powerpc/fsl/e6500_power_isa.dtsi b/src/powerpc/fsl/e6500_power_isa.dtsi
deleted file mode 100644
index a912dbeff359..000000000000
--- a/src/powerpc/fsl/e6500_power_isa.dtsi
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * e6500 Power ISA Device Tree Source (include)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/ {
-	cpus {
-		power-isa-version = "2.06";
-		power-isa-b;		// Base
-		power-isa-e;		// Embedded
-		power-isa-atb;		// Alternate Time Base
-		power-isa-cs;		// Cache Specification
-		power-isa-ds;		// Decorated Storage
-		power-isa-e.ed;		// Embedded.Enhanced Debug
-		power-isa-e.pd;		// Embedded.External PID
-		power-isa-e.hv;		// Embedded.Hypervisor
-		power-isa-e.le;		// Embedded.Little-Endian
-		power-isa-e.pm;		// Embedded.Performance Monitor
-		power-isa-e.pc;		// Embedded.Processor Control
-		power-isa-ecl;		// Embedded Cache Locking
-		power-isa-exp;		// External Proxy
-		power-isa-fp;		// Floating Point
-		power-isa-fp.r;		// Floating Point.Record
-		power-isa-mmc;		// Memory Coherence
-		power-isa-scpm;		// Store Conditional Page Mobility
-		power-isa-wt;		// Wait
-		power-isa-64;		// 64-bit
-		power-isa-e.pt;		// Embedded.Page Table
-		power-isa-e.hv.lrat;	// Embedded.Hypervisor.LRAT
-		power-isa-e.em;		// Embedded Multi-Threading
-		power-isa-v;		// Vector (AltiVec)
-		fsl,eref-er;		// Enhanced Reservations (Load and Reserve and Store Cond.)
-		fsl,eref-deo;		// Data Cache Extended Operations
-		mmu-type = "power-embedded";
-	};
-};
diff --git a/src/powerpc/fsl/elo3-dma-0.dtsi b/src/powerpc/fsl/elo3-dma-0.dtsi
deleted file mode 100644
index 3c210e0d5201..000000000000
--- a/src/powerpc/fsl/elo3-dma-0.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x100000 ]
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-dma0: dma@100300 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,elo3-dma";
-	reg = <0x100300 0x4>,
-	      <0x100600 0x4>;
-	ranges = <0x0 0x100100 0x500>;
-	dma-channel@0 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x0 0x80>;
-		interrupts = <28 2 0 0>;
-	};
-	dma-channel@80 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x80 0x80>;
-		interrupts = <29 2 0 0>;
-	};
-	dma-channel@100 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x100 0x80>;
-		interrupts = <30 2 0 0>;
-	};
-	dma-channel@180 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x180 0x80>;
-		interrupts = <31 2 0 0>;
-	};
-	dma-channel@300 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x300 0x80>;
-		interrupts = <76 2 0 0>;
-	};
-	dma-channel@380 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x380 0x80>;
-		interrupts = <77 2 0 0>;
-	};
-	dma-channel@400 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x400 0x80>;
-		interrupts = <78 2 0 0>;
-	};
-	dma-channel@480 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x480 0x80>;
-		interrupts = <79 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/elo3-dma-1.dtsi b/src/powerpc/fsl/elo3-dma-1.dtsi
deleted file mode 100644
index cccf3bb38224..000000000000
--- a/src/powerpc/fsl/elo3-dma-1.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x101000 ]
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-dma1: dma@101300 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,elo3-dma";
-	reg = <0x101300 0x4>,
-	      <0x101600 0x4>;
-	ranges = <0x0 0x101100 0x500>;
-	dma-channel@0 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x0 0x80>;
-		interrupts = <32 2 0 0>;
-	};
-	dma-channel@80 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x80 0x80>;
-		interrupts = <33 2 0 0>;
-	};
-	dma-channel@100 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x100 0x80>;
-		interrupts = <34 2 0 0>;
-	};
-	dma-channel@180 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x180 0x80>;
-		interrupts = <35 2 0 0>;
-	};
-	dma-channel@300 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x300 0x80>;
-		interrupts = <80 2 0 0>;
-	};
-	dma-channel@380 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x380 0x80>;
-		interrupts = <81 2 0 0>;
-	};
-	dma-channel@400 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x400 0x80>;
-		interrupts = <82 2 0 0>;
-	};
-	dma-channel@480 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x480 0x80>;
-		interrupts = <83 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/elo3-dma-2.dtsi b/src/powerpc/fsl/elo3-dma-2.dtsi
deleted file mode 100644
index d3cc8d0f7c25..000000000000
--- a/src/powerpc/fsl/elo3-dma-2.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ]
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-dma2: dma@102300 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,elo3-dma";
-	reg = <0x102300 0x4>,
-	      <0x102600 0x4>;
-	ranges = <0x0 0x102100 0x500>;
-	dma-channel@0 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x0 0x80>;
-		interrupts = <464 2 0 0>;
-	};
-	dma-channel@80 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x80 0x80>;
-		interrupts = <465 2 0 0>;
-	};
-	dma-channel@100 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x100 0x80>;
-		interrupts = <466 2 0 0>;
-	};
-	dma-channel@180 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x180 0x80>;
-		interrupts = <467 2 0 0>;
-	};
-	dma-channel@300 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x300 0x80>;
-		interrupts = <468 2 0 0>;
-	};
-	dma-channel@380 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x380 0x80>;
-		interrupts = <469 2 0 0>;
-	};
-	dma-channel@400 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x400 0x80>;
-		interrupts = <470 2 0 0>;
-	};
-	dma-channel@480 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x480 0x80>;
-		interrupts = <471 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/interlaken-lac-portals.dtsi b/src/powerpc/fsl/interlaken-lac-portals.dtsi
deleted file mode 100644
index 9cffccf4e07e..000000000000
--- a/src/powerpc/fsl/interlaken-lac-portals.dtsi
+++ /dev/null
@@ -1,156 +0,0 @@
-/* T4240 Interlaken LAC Portal device tree stub with 24 portals.
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#address-cells = <0x1>;
-#size-cells = <0x1>;
-compatible = "fsl,interlaken-lac-portals";
-
-lportal0: lac-portal@0 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x0 0x1000>;
-};
-
-lportal1: lac-portal@1000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x1000 0x1000>;
-};
-
-lportal2: lac-portal@2000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x2000 0x1000>;
-};
-
-lportal3: lac-portal@3000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x3000 0x1000>;
-};
-
-lportal4: lac-portal@4000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x4000 0x1000>;
-};
-
-lportal5: lac-portal@5000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x5000 0x1000>;
-};
-
-lportal6: lac-portal@6000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x6000 0x1000>;
-};
-
-lportal7: lac-portal@7000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x7000 0x1000>;
-};
-
-lportal8: lac-portal@8000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x8000 0x1000>;
-};
-
-lportal9: lac-portal@9000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x9000 0x1000>;
-};
-
-lportal10: lac-portal@A000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0xA000 0x1000>;
-};
-
-lportal11: lac-portal@B000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0xB000 0x1000>;
-};
-
-lportal12: lac-portal@C000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0xC000 0x1000>;
-};
-
-lportal13: lac-portal@D000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0xD000 0x1000>;
-};
-
-lportal14: lac-portal@E000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0xE000 0x1000>;
-};
-
-lportal15: lac-portal@F000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0xF000 0x1000>;
-};
-
-lportal16: lac-portal@10000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x10000 0x1000>;
-};
-
-lportal17: lac-portal@11000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x11000 0x1000>;
-};
-
-lportal18: lac-portal@1200 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x12000 0x1000>;
-};
-
-lportal19: lac-portal@13000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x13000 0x1000>;
-};
-
-lportal20: lac-portal@14000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x14000 0x1000>;
-};
-
-lportal21: lac-portal@15000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x15000 0x1000>;
-};
-
-lportal22: lac-portal@16000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x16000 0x1000>;
-};
-
-lportal23: lac-portal@17000 {
-	compatible = "fsl,interlaken-lac-portal-v1.0";
-	reg = <0x17000 0x1000>;
-};
diff --git a/src/powerpc/fsl/interlaken-lac.dtsi b/src/powerpc/fsl/interlaken-lac.dtsi
deleted file mode 100644
index e8208720ac0e..000000000000
--- a/src/powerpc/fsl/interlaken-lac.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * T4 Interlaken Look-aside Controller (LAC) device tree stub
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-lac: lac@229000 {
-	compatible = "fsl,interlaken-lac";
-	reg = <0x229000 0x1000>;
-	interrupts = <16 2 1 18>;
-};
-
-lac-hv@228000 {
-	compatible = "fsl,interlaken-lac-hv";
-	reg = <0x228000 0x1000>;
-	fsl,non-hv-node = <&lac>;
-};
diff --git a/src/powerpc/fsl/mpc8536si-post.dtsi b/src/powerpc/fsl/mpc8536si-post.dtsi
deleted file mode 100644
index c8b2daa40ac8..000000000000
--- a/src/powerpc/fsl/mpc8536si-post.dtsi
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * MPC8536 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <19 2 0 0>;
-};
-
-/* controller at 0x8000 */
-&pci0 {
-	compatible = "fsl,mpc8540-pci";
-	device_type = "pci";
-	interrupts = <24 0x2 0 0>;
-	bus-range = <0 0xff>;
-	#interrupt-cells = <1>;
-	#size-cells = <2>;
-	#address-cells = <3>;
-};
-
-/* controller at 0x9000 */
-&pci1 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <25 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <25 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0xa000 */
-&pci2 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <26 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <26 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0xb000 */
-&pci3 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <27 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <27 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
-			>;
-	};
-};
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,mpc8536-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,mpc8536-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <17 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,mpc8536-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <18 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-
-/include/ "pq3-espi-0.dtsi"
-	spi@7000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "pq3-gpio-0.dtsi"
-
-	/* mark compat w/8572 to get some erratum treatment */
-	gpio-controller@f000 {
-		compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
-	};
-
-	sata@18000 {
-		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-		reg = <0x18000 0x1000>;
-		cell-index = <1>;
-		interrupts = <74 0x2 0 0>;
-	};
-
-	sata@19000 {
-		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
-		reg = <0x19000 0x1000>;
-		cell-index = <2>;
-		interrupts = <41 0x2 0 0>;
-	};
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,mpc8536-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x80000>; // L2, 512K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-etsec1-0.dtsi"
-/include/ "pq3-etsec1-timer-0.dtsi"
-
-	usb@22000 {
-		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-		reg = <0x22000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <28 0x2 0 0>;
-	};
-
-	usb@23000 {
-		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
-		reg = <0x23000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <46 0x2 0 0>;
-	};
-
-	ptp_clock@24e00 {
-		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
-	};
-
-/include/ "pq3-etsec1-2.dtsi"
-
-	ethernet@26000 {
-		cell-index = <1>;
-	};
-
-	usb@2b000 {
-		compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
-		reg = <0x2b000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <60 0x2 0 0>;
-	};
-
-/include/ "pq3-esdhc-0.dtsi"
-	sdhc@2e000 {
-		compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
-	};
-
-/include/ "pq3-sec3.0-0.dtsi"
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-mpic-timer-B.dtsi"
-
-	global-utilities@e0000 {
-		compatible = "fsl,mpc8536-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
diff --git a/src/powerpc/fsl/mpc8536si-pre.dtsi b/src/powerpc/fsl/mpc8536si-pre.dtsi
deleted file mode 100644
index 152906f98a0f..000000000000
--- a/src/powerpc/fsl/mpc8536si-pre.dtsi
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * MPC8536 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,MPC8536";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet2;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8536@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/mpc8544si-post.dtsi b/src/powerpc/fsl/mpc8544si-post.dtsi
deleted file mode 100644
index b68eb119faef..000000000000
--- a/src/powerpc/fsl/mpc8544si-post.dtsi
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * MPC8544 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
-	interrupts = <19 2 0 0>;
-};
-
-/* controller at 0x8000 */
-&pci0 {
-	compatible = "fsl,mpc8540-pci";
-	device_type = "pci";
-	interrupts = <24 0x2 0 0>;
-	bus-range = <0 0xff>;
-	#interrupt-cells = <1>;
-	#size-cells = <2>;
-	#address-cells = <3>;
-};
-
-/* controller at 0x9000 */
-&pci1 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <25 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <25 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0xa000 */
-&pci2 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <26 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <26 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0xb000 */
-&pci3 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <27 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <27 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
-			>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,mpc8544-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <10>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,mpc8544-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <17 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,mpc8544-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <18 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,mpc8544-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x40000>; // L2, 256K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-etsec1-0.dtsi"
-/include/ "pq3-etsec1-2.dtsi"
-
-	ethernet@26000 {
-		cell-index = <1>;
-	};
-
-/include/ "pq3-sec2.1-0.dtsi"
-/include/ "pq3-mpic.dtsi"
-
-	global-utilities@e0000 {
-		compatible = "fsl,mpc8544-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
diff --git a/src/powerpc/fsl/mpc8544si-pre.dtsi b/src/powerpc/fsl/mpc8544si-pre.dtsi
deleted file mode 100644
index 5a69bafb652a..000000000000
--- a/src/powerpc/fsl/mpc8544si-pre.dtsi
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * MPC8544 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,MPC8544";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet2;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8544@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/mpc8548si-post.dtsi b/src/powerpc/fsl/mpc8548si-post.dtsi
deleted file mode 100644
index 579d76cb8e32..000000000000
--- a/src/powerpc/fsl/mpc8548si-post.dtsi
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * MPC8548 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
-	interrupts = <19 2 0 0>;
-};
-
-/* controller at 0x8000 */
-&pci0 {
-	compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-	device_type = "pci";
-	interrupts = <24 0x2 0 0>;
-	bus-range = <0 0xff>;
-	#interrupt-cells = <1>;
-	#size-cells = <2>;
-	#address-cells = <3>;
-};
-
-/* controller at 0x9000 */
-&pci1 {
-	compatible = "fsl,mpc8540-pci";
-	device_type = "pci";
-	interrupts = <25 0x2 0 0>;
-	bus-range = <0 0xff>;
-	#interrupt-cells = <1>;
-	#size-cells = <2>;
-	#address-cells = <3>;
-};
-
-/* controller at 0xa000 */
-&pci2 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <26 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <26 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <48 2 0 0>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	fsl,srio-rmu-handle = <&rmu>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,mpc8548-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <10>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,mpc8548-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <17 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,mpc8548-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <18 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,mpc8548-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x80000>; // L2, 512K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-etsec1-0.dtsi"
-/include/ "pq3-etsec1-1.dtsi"
-/include/ "pq3-etsec1-2.dtsi"
-/include/ "pq3-etsec1-3.dtsi"
-
-/include/ "pq3-sec2.1-0.dtsi"
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-rmu-0.dtsi"
-
-	global-utilities@e0000 {
-		compatible = "fsl,mpc8548-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
diff --git a/src/powerpc/fsl/mpc8548si-pre.dtsi b/src/powerpc/fsl/mpc8548si-pre.dtsi
deleted file mode 100644
index fc1ce977422b..000000000000
--- a/src/powerpc/fsl/mpc8548si-pre.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * MPC8548 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,MPC8548";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8548@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/mpc8568si-post.dtsi b/src/powerpc/fsl/mpc8568si-post.dtsi
deleted file mode 100644
index 64e7075a9cd4..000000000000
--- a/src/powerpc/fsl/mpc8568si-post.dtsi
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * MPC8568 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
-	interrupts = <19 2 0 0>;
-	sleep = <&pmc 0x08000000>;
-};
-
-/* controller at 0x8000 */
-&pci0 {
-	compatible = "fsl,mpc8540-pci";
-	device_type = "pci";
-	interrupts = <24 0x2 0 0>;
-	bus-range = <0 0xff>;
-	#interrupt-cells = <1>;
-	#size-cells = <2>;
-	#address-cells = <3>;
-	sleep = <&pmc 0x80000000>;
-};
-
-/* controller at 0xa000 */
-&pci1 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <26 2 0 0>;
-	sleep = <&pmc 0x20000000>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <26 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <48 2 0 0>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	fsl,srio-rmu-handle = <&rmu>;
-	sleep = <&pmc 0x00080000>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,mpc8568-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <10>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,mpc8568-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <17 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,mpc8568-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <18 2 0 0>;
-	};
-
-	i2c-sleep-nexus {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		sleep = <&pmc 0x00000004>;
-		ranges;
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-
-	};
-
-	duart-sleep-nexus {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		sleep = <&pmc 0x00000002>;
-		ranges;
-
-/include/ "pq3-duart-0.dtsi"
-
-	};
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,mpc8568-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x80000>; // L2, 512K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-	dma@21300 {
-		sleep = <&pmc 0x00000400>;
-	};
-
-/include/ "pq3-etsec1-0.dtsi"
-	ethernet@24000 {
-		sleep = <&pmc 0x00000080>;
-	};
-
-/include/ "pq3-etsec1-1.dtsi"
-	ethernet@25000 {
-		sleep = <&pmc 0x00000040>;
-	};
-
-	par_io@e0100 {
-		reg = <0xe0100 0x100>;
-		device_type = "par_io";
-	};
-
-/include/ "pq3-sec2.1-0.dtsi"
-	crypto@30000 {
-		sleep = <&pmc 0x01000000>;
-	};
-
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-rmu-0.dtsi"
-	rmu@d3000 {
-		sleep = <&pmc 0x00040000>;
-	};
-
-	global-utilities@e0000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
-		reg = <0xe0000 0x1000>;
-		ranges = <0 0xe0000 0x1000>;
-		fsl,has-rstcr;
-
-		pmc: power@70 {
-			compatible = "fsl,mpc8568-pmc",
-				     "fsl,mpc8548-pmc";
-			reg = <0x70 0x20>;
-		};
-	};
-};
-
-&qe {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "qe";
-	compatible = "fsl,qe";
-	sleep = <&pmc 0x00000800>;
-	brg-frequency = <0>;
-	bus-frequency = <396000000>;
-	fsl,qe-num-riscs = <2>;
-	fsl,qe-num-snums = <28>;
-
-	qeic: interrupt-controller@80 {
-		interrupt-controller;
-		compatible = "fsl,qe-ic";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x80 0x80>;
-		interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
-		interrupt-parent = <&mpic>;
-	};
-
-	spi@4c0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,spi";
-		reg = <0x4c0 0x40>;
-		cell-index = <0>;
-		interrupts = <2>;
-		interrupt-parent = <&qeic>;
-	};
-
-	spi@500 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cell-index = <1>;
-		compatible = "fsl,spi";
-		reg = <0x500 0x40>;
-		interrupts = <1>;
-		interrupt-parent = <&qeic>;
-	};
-
-	ucc@2000 {
-		cell-index = <1>;
-		reg = <0x2000 0x200>;
-		interrupts = <32>;
-		interrupt-parent = <&qeic>;
-	};
-
-	ucc@3000 {
-		cell-index = <2>;
-		reg = <0x3000 0x200>;
-		interrupts = <33>;
-		interrupt-parent = <&qeic>;
-	};
-
-	muram@10000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,qe-muram", "fsl,cpm-muram";
-		ranges = <0x0 0x10000 0x10000>;
-
-		data-only@0 {
-			compatible = "fsl,qe-muram-data",
-				     "fsl,cpm-muram-data";
-			reg = <0x0 0x10000>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/mpc8568si-pre.dtsi b/src/powerpc/fsl/mpc8568si-pre.dtsi
deleted file mode 100644
index 122ca3bd0b03..000000000000
--- a/src/powerpc/fsl/mpc8568si-pre.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * MPC8568 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,MPC8568";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8568@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-			sleep = <&pmc 0x00008000	// core
-				 &pmc 0x00004000>;	// timebase
-		};
-	};
-};
diff --git a/src/powerpc/fsl/mpc8569si-post.dtsi b/src/powerpc/fsl/mpc8569si-post.dtsi
deleted file mode 100644
index 3e6346a4a183..000000000000
--- a/src/powerpc/fsl/mpc8569si-post.dtsi
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * MPC8569 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <19 2 0 0>;
-	sleep = <&pmc 0x08000000>;
-};
-
-/* controller at 0xa000 */
-&pci1 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <26 2 0 0>;
-	sleep = <&pmc 0x20000000>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <26 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <48 2 0 0>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	fsl,srio-rmu-handle = <&rmu>;
-	sleep = <&pmc 0x00080000>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-	};
-
-	port2 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <2>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,mpc8569-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <10>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,mpc8569-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <17 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,mpc8569-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <18 2 0 0>;
-	};
-
-	i2c-sleep-nexus {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		sleep = <&pmc 0x00000004>;
-		ranges;
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-
-	};
-
-	duart-sleep-nexus {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		sleep = <&pmc 0x00000002>;
-		ranges;
-
-/include/ "pq3-duart-0.dtsi"
-
-	};
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,mpc8569-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x80000>; // L2, 512K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-esdhc-0.dtsi"
-	sdhc@2e000 {
-		sleep = <&pmc 0x00200000>;
-	};
-
-	par_io@e0100 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xe0100 0x100>;
-		ranges = <0x0 0xe0100 0x100>;
-		device_type = "par_io";
-	};
-
-/include/ "pq3-sec3.1-0.dtsi"
-	crypto@30000 {
-		sleep = <&pmc 0x01000000>;
-	};
-
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-rmu-0.dtsi"
-	rmu@d3000 {
-		sleep = <&pmc 0x00040000>;
-	};
-
-	global-utilities@e0000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
-		reg = <0xe0000 0x1000>;
-		ranges = <0 0xe0000 0x1000>;
-		fsl,has-rstcr;
-
-		pmc: power@70 {
-			compatible = "fsl,mpc8569-pmc",
-				     "fsl,mpc8548-pmc";
-			reg = <0x70 0x20>;
-		};
-	};
-};
-
-&qe {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "qe";
-	compatible = "fsl,qe";
-	sleep = <&pmc 0x00000800>;
-	brg-frequency = <0>;
-	bus-frequency = <0>;
-	fsl,qe-num-riscs = <4>;
-	fsl,qe-num-snums = <46>;
-
-	qeic: interrupt-controller@80 {
-		interrupt-controller;
-		compatible = "fsl,qe-ic";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x80 0x80>;
-		interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
-		interrupt-parent = <&mpic>;
-	};
-
-	timer@440 {
-		compatible = "fsl,mpc8569-qe-gtm",
-			     "fsl,qe-gtm", "fsl,gtm";
-		reg = <0x440 0x40>;
-		interrupts = <12 13 14 15>;
-		interrupt-parent = <&qeic>;
-		/* Filled in by U-Boot */
-		clock-frequency = <0>;
-	};
-
-	spi@4c0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
-		reg = <0x4c0 0x40>;
-		cell-index = <0>;
-		interrupts = <2>;
-		interrupt-parent = <&qeic>;
-	};
-
-	spi@500 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cell-index = <1>;
-		compatible = "fsl,spi";
-		reg = <0x500 0x40>;
-		interrupts = <1>;
-		interrupt-parent = <&qeic>;
-	};
-
-	usb@6c0 {
-		compatible = "fsl,mpc8569-qe-usb",
-			     "fsl,mpc8323-qe-usb";
-		reg = <0x6c0 0x40 0x8b00 0x100>;
-		interrupts = <11>;
-		interrupt-parent = <&qeic>;
-	};
-
-	ucc@2000 {
-		cell-index = <1>;
-		reg = <0x2000 0x200>;
-		interrupts = <32>;
-		interrupt-parent = <&qeic>;
-	};
-
-	ucc@2200 {
-		cell-index = <3>;
-		reg = <0x2200 0x200>;
-		interrupts = <34>;
-		interrupt-parent = <&qeic>;
-	};
-
-	ucc@3000 {
-		cell-index = <2>;
-		reg = <0x3000 0x200>;
-		interrupts = <33>;
-		interrupt-parent = <&qeic>;
-	};
-
-	ucc@3200 {
-		cell-index = <4>;
-		reg = <0x3200 0x200>;
-		interrupts = <35>;
-		interrupt-parent = <&qeic>;
-	};
-
-	ucc@3400 {
-		cell-index = <6>;
-		reg = <0x3400 0x200>;
-		interrupts = <41>;
-		interrupt-parent = <&qeic>;
-	};
-
-	ucc@3600 {
-		cell-index = <8>;
-		reg = <0x3600 0x200>;
-		interrupts = <43>;
-		interrupt-parent = <&qeic>;
-	};
-
-	muram@10000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,qe-muram", "fsl,cpm-muram";
-		ranges = <0x0 0x10000 0x20000>;
-
-		data-only@0 {
-			compatible = "fsl,qe-muram-data",
-				     "fsl,cpm-muram-data";
-			reg = <0x0 0x20000>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/mpc8569si-pre.dtsi b/src/powerpc/fsl/mpc8569si-pre.dtsi
deleted file mode 100644
index 2cd15a2a0422..000000000000
--- a/src/powerpc/fsl/mpc8569si-pre.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * MPC8569 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,MPC8569";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8569@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-			sleep = <&pmc 0x00008000	// core
-				 &pmc 0x00004000>;	// timebase
-		};
-	};
-};
diff --git a/src/powerpc/fsl/mpc8572si-post.dtsi b/src/powerpc/fsl/mpc8572si-post.dtsi
deleted file mode 100644
index d44e25a48734..000000000000
--- a/src/powerpc/fsl/mpc8572si-post.dtsi
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * MPC8572 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <19 2 0 0>;
-};
-
-/* controller at 0x8000 */
-&pci0 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <24 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <24 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0x9000 */
-&pci1 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <25 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <25 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0xa000 */
-&pci2 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <26 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <26 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,mpc8572-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,mpc8572-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <17 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,mpc8572-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <18 2 0 0>;
-	};
-
-	memory-controller@6000 {
-		compatible = "fsl,mpc8572-memory-controller";
-		reg = <0x6000 0x1000>;
-		interrupts = <18 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-/include/ "pq3-dma-1.dtsi"
-/include/ "pq3-gpio-0.dtsi"
-	gpio-controller@f000 {
-		compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
-	};
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,mpc8572-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x100000>; // L2,1M
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-etsec1-0.dtsi"
-/include/ "pq3-etsec1-timer-0.dtsi"
-
-	ptp_clock@24e00 {
-		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
-	};
-
-/include/ "pq3-etsec1-1.dtsi"
-/include/ "pq3-etsec1-2.dtsi"
-/include/ "pq3-etsec1-3.dtsi"
-/include/ "pq3-sec3.0-0.dtsi"
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-mpic-timer-B.dtsi"
-
-	global-utilities@e0000 {
-		compatible = "fsl,mpc8572-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
diff --git a/src/powerpc/fsl/mpc8572si-pre.dtsi b/src/powerpc/fsl/mpc8572si-pre.dtsi
deleted file mode 100644
index 28c2a862be96..000000000000
--- a/src/powerpc/fsl/mpc8572si-pre.dtsi
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * MPC8572 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,MPC8572";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8572@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,8572@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p1010si-post.dtsi b/src/powerpc/fsl/p1010si-post.dtsi
deleted file mode 100644
index af12ead88c5f..000000000000
--- a/src/powerpc/fsl/p1010si-post.dtsi
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * P1010/P1014 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <16 2 0 0 19 2 0 0>;
-};
-
-/* controller at 0x9000 */
-&pci0 {
-	compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0xa000 */
-&pci1 {
-	compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,p1010-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,p1010-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,p1010-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-/include/ "pq3-espi-0.dtsi"
-	spi0: spi@7000 {
-		fsl,espi-num-chipselects = <1>;
-	};
-
-/include/ "pq3-gpio-0.dtsi"
-/include/ "pq3-sata2-0.dtsi"
-/include/ "pq3-sata2-1.dtsi"
-
-	can0: can@1c000 {
-		compatible = "fsl,p1010-flexcan";
-		reg = <0x1c000 0x1000>;
-		interrupts = <48 0x2 0 0>;
-	};
-
-	can1: can@1d000 {
-		compatible = "fsl,p1010-flexcan";
-		reg = <0x1d000 0x1000>;
-		interrupts = <61 0x2 0 0>;
-	};
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,p1010-l2-cache-controller",
-				"fsl,p1014-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x40000>; // L2,256K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-usb2-dr-0.dtsi"
-	usb@22000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
-	};
-/include/ "pq3-esdhc-0.dtsi"
-	sdhc@2e000 {
-		compatible = "fsl,p1010-esdhc", "fsl,esdhc";
-		sdhci,auto-cmd12;
-	};
-
-/include/ "pq3-sec4.4-0.dtsi"
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-mpic-timer-B.dtsi"
-
-/include/ "pq3-etsec2-0.dtsi"
-	enet0: ethernet@b0000 {
-		queue-group@b0000 {
-			fsl,rx-bit-map = <0xff>;
-			fsl,tx-bit-map = <0xff>;
-		};
-	};
-
-/include/ "pq3-etsec2-1.dtsi"
-	enet1: ethernet@b1000 {
-		queue-group@b1000 {
-			fsl,rx-bit-map = <0xff>;
-			fsl,tx-bit-map = <0xff>;
-		};
-	};
-
-/include/ "pq3-etsec2-2.dtsi"
-	enet2: ethernet@b2000 {
-		queue-group@b2000 {
-			fsl,rx-bit-map = <0xff>;
-			fsl,tx-bit-map = <0xff>;
-		};
-
-	};
-
-	global-utilities@e0000 {
-		compatible = "fsl,p1010-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
diff --git a/src/powerpc/fsl/p1010si-pre.dtsi b/src/powerpc/fsl/p1010si-pre.dtsi
deleted file mode 100644
index 6e76f9b282a1..000000000000
--- a/src/powerpc/fsl/p1010si-pre.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * P1010/P1014 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P1010";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		can0 = &can0;
-		can1 = &can1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1010@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p1020si-post.dtsi b/src/powerpc/fsl/p1020si-post.dtsi
deleted file mode 100644
index 642dc3a83d0e..000000000000
--- a/src/powerpc/fsl/p1020si-post.dtsi
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * P1020/P1011 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <19 2 0 0>,
-		     <16 2 0 0>;
-};
-
-/* controller at 0x9000 */
-&pci0 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0xa000 */
-&pci1 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,p1020-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,p1020-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,p1020-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-
-/include/ "pq3-espi-0.dtsi"
-	spi@7000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "pq3-gpio-0.dtsi"
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,p1020-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x40000>; // L2,256K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-usb2-dr-0.dtsi"
-	usb@22000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
-	};
-/include/ "pq3-usb2-dr-1.dtsi"
-	usb@23000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
-	};
-
-/include/ "pq3-esdhc-0.dtsi"
-	sdhc@2e000 {
-		compatible = "fsl,p1020-esdhc", "fsl,esdhc";
-		sdhci,auto-cmd12;
-	};
-/include/ "pq3-sec3.3-0.dtsi"
-
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-mpic-timer-B.dtsi"
-
-/include/ "pq3-etsec2-0.dtsi"
-	enet0: enet0_grp2: ethernet@b0000 {
-	};
-
-/include/ "pq3-etsec2-1.dtsi"
-	enet1: enet1_grp2: ethernet@b1000 {
-	};
-
-/include/ "pq3-etsec2-2.dtsi"
-	enet2: enet2_grp2: ethernet@b2000 {
-	};
-
-	global-utilities@e0000 {
-		compatible = "fsl,p1020-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
-
-/include/ "pq3-etsec2-grp2-0.dtsi"
-/include/ "pq3-etsec2-grp2-1.dtsi"
-/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/src/powerpc/fsl/p1020si-pre.dtsi b/src/powerpc/fsl/p1020si-pre.dtsi
deleted file mode 100644
index fed9c4c8d962..000000000000
--- a/src/powerpc/fsl/p1020si-pre.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * P1020/P1011 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P1020";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p1021si-post.dtsi b/src/powerpc/fsl/p1021si-post.dtsi
deleted file mode 100644
index 407cb5fd0f5b..000000000000
--- a/src/powerpc/fsl/p1021si-post.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * P1021/P1012 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <19 2 0 0>,
-		     <16 2 0 0>;
-};
-
-/* controller at 0x9000 */
-&pci0 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0xa000 */
-&pci1 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,p1021-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,p1021-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,p1021-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-
-/include/ "pq3-espi-0.dtsi"
-	spi@7000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "pq3-gpio-0.dtsi"
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,p1021-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x40000>; // L2,256K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-usb2-dr-0.dtsi"
-	usb@22000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
-	};
-
-/include/ "pq3-esdhc-0.dtsi"
-	sdhc@2e000 {
-		sdhci,auto-cmd12;
-	};
-
-/include/ "pq3-sec3.3-0.dtsi"
-
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-mpic-timer-B.dtsi"
-
-/include/ "pq3-etsec2-0.dtsi"
-	enet0: enet0_grp2: ethernet@b0000 {
-	};
-
-/include/ "pq3-etsec2-1.dtsi"
-	enet1: enet1_grp2: ethernet@b1000 {
-	};
-
-/include/ "pq3-etsec2-2.dtsi"
-	enet2: enet2_grp2: ethernet@b2000 {
-	};
-
-	global-utilities@e0000 {
-		compatible = "fsl,p1021-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
-
-&qe {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "qe";
-	compatible = "fsl,qe";
-	fsl,qe-num-riscs = <1>;
-	fsl,qe-num-snums = <28>;
-
-	qeic: interrupt-controller@80 {
-		interrupt-controller;
-		compatible = "fsl,qe-ic";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		reg = <0x80 0x80>;
-		interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
-	};
-
-	ucc@2000 {
-		cell-index = <1>;
-		reg = <0x2000 0x200>;
-		interrupts = <32>;
-		interrupt-parent = <&qeic>;
-	};
-
-	mdio@2120 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x2120 0x18>;
-		compatible = "fsl,ucc-mdio";
-	};
-
-	ucc@2400 {
-		cell-index = <5>;
-		reg = <0x2400 0x200>;
-		interrupts = <40>;
-		interrupt-parent = <&qeic>;
-	};
-
-	ucc@2600 {
-		cell-index = <7>;
-		reg = <0x2600 0x200>;
-		interrupts = <42>;
-		interrupt-parent = <&qeic>;
-	};
-
-	ucc@2200 {
-		cell-index = <3>;
-		reg = <0x2200 0x200>;
-		interrupts = <34>;
-		interrupt-parent = <&qeic>;
-	};
-
-	muram@10000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,qe-muram", "fsl,cpm-muram";
-		ranges = <0x0 0x10000 0x6000>;
-
-		data-only@0 {
-			compatible = "fsl,qe-muram-data",
-			"fsl,cpm-muram-data";
-			reg = <0x0 0x6000>;
-		};
-	};
-};
-
-/include/ "pq3-etsec2-grp2-0.dtsi"
-/include/ "pq3-etsec2-grp2-1.dtsi"
-/include/ "pq3-etsec2-grp2-2.dtsi"
diff --git a/src/powerpc/fsl/p1021si-pre.dtsi b/src/powerpc/fsl/p1021si-pre.dtsi
deleted file mode 100644
index 36161b500176..000000000000
--- a/src/powerpc/fsl/p1021si-pre.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * P1021/P1012 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P1021";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1021@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1021@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p1022si-post.dtsi b/src/powerpc/fsl/p1022si-post.dtsi
deleted file mode 100644
index ebf202234549..000000000000
--- a/src/powerpc/fsl/p1022si-post.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * P1022/P1013 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	/*
-	 * The localbus on the P1022 is not a simple-bus because of the eLBC
-	 * pin muxing when the DIU is enabled.
-	 */
-	compatible = "fsl,p1022-elbc", "fsl,elbc";
-	interrupts = <19 2 0 0>,
-		     <16 2 0 0>;
-};
-
-/* controller at 0x9000 */
-&pci0 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0xa000 */
-&pci1 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0xb000 */
-&pci2 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
-			>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,p1022-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,p1022-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,p1022-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-/include/ "pq3-espi-0.dtsi"
-	spi@7000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "pq3-dma-1.dtsi"
-	dma@c300 {
-		dma00: dma-channel@0 {
-			compatible = "fsl,ssi-dma-channel";
-		};
-		dma01: dma-channel@80 {
-			compatible = "fsl,ssi-dma-channel";
-		};
-	};
-
-/include/ "pq3-gpio-0.dtsi"
-
-	display@10000 {
-		compatible = "fsl,diu", "fsl,p1022-diu";
-		reg = <0x10000 1000>;
-		interrupts = <64 2 0 0>;
-	};
-
-	ssi@15000 {
-		compatible = "fsl,mpc8610-ssi";
-		cell-index = <0>;
-		reg = <0x15000 0x100>;
-		interrupts = <75 2 0 0>;
-		fsl,playback-dma = <&dma00>;
-		fsl,capture-dma = <&dma01>;
-		fsl,fifo-depth = <15>;
-	};
-
-/include/ "pq3-sata2-0.dtsi"
-/include/ "pq3-sata2-1.dtsi"
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,p1022-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x40000>; // L2,256K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-usb2-dr-0.dtsi"
-	usb@22000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
-	};
-/include/ "pq3-usb2-dr-1.dtsi"
-	usb@23000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
-	};
-
-/include/ "pq3-esdhc-0.dtsi"
-	sdhc@2e000 {
-		compatible = "fsl,p1022-esdhc", "fsl,esdhc";
-		sdhci,auto-cmd12;
-	};
-
-/include/ "pq3-sec3.3-0.dtsi"
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-mpic-timer-B.dtsi"
-
-/include/ "pq3-etsec2-0.dtsi"
-	enet0: enet0_grp2: ethernet@b0000 {
-	};
-
-/include/ "pq3-etsec2-1.dtsi"
-	enet1: enet1_grp2: ethernet@b1000 {
-	};
-
-	global-utilities@e0000 {
-		compatible = "fsl,p1022-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-
-	power@e0070{
-		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
-		reg = <0xe0070 0x20>;
-	};
-
-};
-
-/include/ "pq3-etsec2-grp2-0.dtsi"
-/include/ "pq3-etsec2-grp2-1.dtsi"
diff --git a/src/powerpc/fsl/p1022si-pre.dtsi b/src/powerpc/fsl/p1022si-pre.dtsi
deleted file mode 100644
index 1956dea040cc..000000000000
--- a/src/powerpc/fsl/p1022si-pre.dtsi
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * P1022/P1013 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P1022";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1022@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1022@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p1023si-post.dtsi b/src/powerpc/fsl/p1023si-post.dtsi
deleted file mode 100644
index 81437fdf1db4..000000000000
--- a/src/powerpc/fsl/p1023si-post.dtsi
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * P1023/P1017 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <19 2 0 0>,
-		     <16 2 0 0>;
-};
-
-/* controller at 0xa000 */
-&pci0 {
-	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-	};
-};
-
-/* controller at 0x9000 */
-&pci1 {
-	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-	};
-};
-
-/* controller at 0xb000 */
-&pci2 {
-	compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 0 0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 0 0>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,p1023-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,p1023-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,p1023-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-
-/include/ "pq3-espi-0.dtsi"
-	spi@7000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "pq3-gpio-0.dtsi"
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,p1023-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x40000>; // L2,256K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-usb2-dr-0.dtsi"
-	usb@22000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
-	};
-
-	crypto: crypto@300000 {
-		compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
-		fsl,sec-era = <3>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x30000 0x10000>;
-		ranges = <0 0x30000 0x10000>;
-		interrupts = <58 2 0 0>;
-
-		sec_jr0: jr@1000 {
-			compatible = "fsl,sec-v4.2-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-			reg = <0x1000 0x1000>;
-			interrupts = <45 2 0 0>;
-		};
-
-		sec_jr1: jr@2000 {
-			compatible = "fsl,sec-v4.2-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-			reg = <0x2000 0x1000>;
-			interrupts = <45 2 0 0>;
-		};
-
-		sec_jr2: jr@3000 {
-			compatible = "fsl,sec-v4.2-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-			reg = <0x3000 0x1000>;
-			interrupts = <57 2 0 0>;
-		};
-
-		sec_jr3: jr@4000 {
-			compatible = "fsl,sec-v4.2-job-ring",
-				     "fsl,sec-v4.0-job-ring";
-			reg = <0x4000 0x1000>;
-			interrupts = <57 2 0 0>;
-		};
-
-		rtic@6000 {
-			compatible = "fsl,sec-v4.2-rtic",
-				     "fsl,sec-v4.0-rtic";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x6000 0x100>;
-			ranges = <0x0 0x6100 0xe00>;
-
-			rtic_a: rtic-a@0 {
-				compatible = "fsl,sec-v4.2-rtic-memory",
-					     "fsl,sec-v4.0-rtic-memory";
-				reg = <0x00 0x20 0x100 0x80>;
-			};
-
-			rtic_b: rtic-b@20 {
-				compatible = "fsl,sec-v4.2-rtic-memory",
-					     "fsl,sec-v4.0-rtic-memory";
-				reg = <0x20 0x20 0x200 0x80>;
-			};
-
-			rtic_c: rtic-c@40 {
-				compatible = "fsl,sec-v4.2-rtic-memory",
-					     "fsl,sec-v4.0-rtic-memory";
-				reg = <0x40 0x20 0x300 0x80>;
-			};
-
-			rtic_d: rtic-d@60 {
-				compatible = "fsl,sec-v4.2-rtic-memory",
-					     "fsl,sec-v4.0-rtic-memory";
-				reg = <0x60 0x20 0x500 0x80>;
-			};
-		};
-	};
-
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-mpic-timer-B.dtsi"
-
-	global-utilities@e0000 {
-		compatible = "fsl,p1023-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
diff --git a/src/powerpc/fsl/p1023si-pre.dtsi b/src/powerpc/fsl/p1023si-pre.dtsi
deleted file mode 100644
index 132a1521921a..000000000000
--- a/src/powerpc/fsl/p1023si-pre.dtsi
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * P1023/P1017 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P1023";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P1023@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P1023@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p2020si-post.dtsi b/src/powerpc/fsl/p2020si-post.dtsi
deleted file mode 100644
index 884e01bcb243..000000000000
--- a/src/powerpc/fsl/p2020si-post.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * P2020/P2010 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <19 2 0 0>;
-};
-
-/* controller at 0xa000 */
-&pci0 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <26 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <26 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0x9000 */
-&pci1 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <25 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <25 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
-			>;
-	};
-};
-
-/* controller at 0x8000 */
-&pci2 {
-	compatible = "fsl,mpc8548-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 255>;
-	clock-frequency = <33333333>;
-	interrupts = <24 2 0 0>;
-
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <24 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
-			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
-			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
-			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
-			>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "fsl,p2020-immr", "simple-bus";
-	bus-frequency = <0>;		// Filled out by uboot.
-
-	ecm-law@0 {
-		compatible = "fsl,ecm-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <12>;
-	};
-
-	ecm@1000 {
-		compatible = "fsl,p2020-ecm", "fsl,ecm";
-		reg = <0x1000 0x1000>;
-		interrupts = <17 2 0 0>;
-	};
-
-	memory-controller@2000 {
-		compatible = "fsl,p2020-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <18 2 0 0>;
-	};
-
-/include/ "pq3-i2c-0.dtsi"
-/include/ "pq3-i2c-1.dtsi"
-/include/ "pq3-duart-0.dtsi"
-/include/ "pq3-espi-0.dtsi"
-	spi0: spi@7000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "pq3-dma-1.dtsi"
-/include/ "pq3-gpio-0.dtsi"
-
-	L2: l2-cache-controller@20000 {
-		compatible = "fsl,p2020-l2-cache-controller";
-		reg = <0x20000 0x1000>;
-		cache-line-size = <32>;	// 32 bytes
-		cache-size = <0x80000>; // L2,512K
-		interrupts = <16 2 0 0>;
-	};
-
-/include/ "pq3-dma-0.dtsi"
-/include/ "pq3-usb2-dr-0.dtsi"
-	usb@22000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
-	};
-/include/ "pq3-etsec1-0.dtsi"
-/include/ "pq3-etsec1-timer-0.dtsi"
-
-	ptp_clock@24e00 {
-		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
-	};
-
-
-/include/ "pq3-etsec1-1.dtsi"
-/include/ "pq3-etsec1-2.dtsi"
-/include/ "pq3-esdhc-0.dtsi"
-	sdhc@2e000 {
-		compatible = "fsl,p2020-esdhc", "fsl,esdhc";
-	};
-
-/include/ "pq3-sec3.1-0.dtsi"
-/include/ "pq3-mpic.dtsi"
-/include/ "pq3-mpic-timer-B.dtsi"
-
-	global-utilities@e0000 {
-		compatible = "fsl,p2020-guts";
-		reg = <0xe0000 0x1000>;
-		fsl,has-rstcr;
-	};
-};
diff --git a/src/powerpc/fsl/p2020si-pre.dtsi b/src/powerpc/fsl/p2020si-pre.dtsi
deleted file mode 100644
index 42bf3c6d25ca..000000000000
--- a/src/powerpc/fsl/p2020si-pre.dtsi
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * P2020/P2010 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500v2_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P2020";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,P2020@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,P2020@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			next-level-cache = <&L2>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p2041si-post.dtsi b/src/powerpc/fsl/p2041si-post.dtsi
deleted file mode 100644
index 69ce1026c948..000000000000
--- a/src/powerpc/fsl/p2041si-post.dtsi
+++ /dev/null
@@ -1,454 +0,0 @@
-/*
- * P2041/P2040 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <25 2 0 0>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-};
-
-/* controller at 0x200000 */
-&pci0 {
-	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 15>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 15>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 40 1 0 0
-			0000 0 0 2 &mpic 1 1 0 0
-			0000 0 0 3 &mpic 2 1 0 0
-			0000 0 0 4 &mpic 3 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x201000 */
-&pci1 {
-	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 14>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 14>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 41 1 0 0
-			0000 0 0 2 &mpic 5 1 0 0
-			0000 0 0 3 &mpic 6 1 0 0
-			0000 0 0 4 &mpic 7 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x202000 */
-&pci2 {
-	compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 13>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 13>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 42 1 0 0
-			0000 0 0 2 &mpic 9 1 0 0
-			0000 0 0 3 &mpic 10 1 0 0
-			0000 0 0 4 &mpic 11 1 0 0
-			>;
-	};
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <16 2 1 11>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	fsl,iommu-parent = <&pamu0>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
-	};
-
-	port2 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <2>;
-		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
-	};
-};
-
-&dcsr {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,dcsr", "simple-bus";
-
-	dcsr-epu@0 {
-		compatible = "fsl,p2041-dcsr-epu", "fsl,dcsr-epu";
-		interrupts = <52 2 0 0
-			      84 2 0 0
-			      85 2 0 0>;
-		reg = <0x0 0x1000>;
-	};
-	dcsr-npc {
-		compatible = "fsl,dcsr-npc";
-		reg = <0x1000 0x1000 0x1000000 0x8000>;
-	};
-	dcsr-nxc@2000 {
-		compatible = "fsl,dcsr-nxc";
-		reg = <0x2000 0x1000>;
-	};
-	dcsr-corenet {
-		compatible = "fsl,dcsr-corenet";
-		reg = <0x8000 0x1000 0xB0000 0x1000>;
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
-		reg = <0x9000 0x1000>;
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
-		reg = <0x11000 0x1000>;
-	};
-	dcsr-ddr@12000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr1>;
-		reg = <0x12000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
-		reg = <0x18000 0x1000>;
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
-		reg = <0x22000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@40000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu0>;
-		reg = <0x40000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@41000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x41000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@42000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu2>;
-		reg = <0x42000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@43000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu3>;
-		reg = <0x43000 0x1000>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000>;
-		interrupts = <16 2 1 27>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
-		ranges = <0 0x20000 0x4000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-		fsl,portid-mapping = <0x0f000000>;
-
-		pamu0: pamu@0 {
-			reg = <0 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu1: pamu@1000 {
-			reg = <0x1000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu2: pamu@2000 {
-			reg = <0x2000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu3: pamu@3000 {
-			reg = <0x3000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-	};
-
-/include/ "qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,qoriq-device-config-1.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		#sleep-cells = <1>;
-		fsl,liodn-bits = <12>;
-	};
-
-	pins: global-utilities@e0e00 {
-		compatible = "fsl,qoriq-pin-control-1.0";
-		reg = <0xe0e00 0x200>;
-		#sleep-cells = <2>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		reg = <0xe1000 0x1000>;
-		clock-frequency = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-1.0";
-			clock-output-names = "sysclk";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1@20 {
-			#clock-cells = <0>;
-			reg = <0x20 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux1";
-		};
-
-		mux2: mux2@40 {
-			#clock-cells = <0>;
-			reg = <0x40 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux2";
-		};
-
-		mux3: mux3@60 {
-			#clock-cells = <0>;
-			reg = <0x60 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux3";
-		};
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,qoriq-rcpm-1.0";
-		reg = <0xe2000 0x1000>;
-		#sleep-cells = <1>;
-	};
-
-	sfp: sfp@e8000 {
-		compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
-		reg	   = <0xe8000 0x1000>;
-	};
-
-	serdes: serdes@ea000 {
-		compatible = "fsl,p2041-serdes";
-		reg	   = <0xea000 0x1000>;
-	};
-
-/include/ "qoriq-dma-0.dtsi"
-	dma@100300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
-	};
-
-/include/ "qoriq-dma-1.dtsi"
-	dma@101300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
-	};
-
-/include/ "qoriq-espi-0.dtsi"
-	spi@110000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "qoriq-esdhc-0.dtsi"
-	sdhc@114000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
-		sdhci,auto-cmd12;
-	};
-
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
-	usb0: usb@210000 {
-		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-		phy_type = "utmi";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
-		port0;
-	};
-
-/include/ "qoriq-usb2-dr-0.dtsi"
-	usb1: usb@211000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
-		dr_mode = "host";
-		phy_type = "utmi";
-	};
-
-/include/ "qoriq-sata2-0.dtsi"
-	sata@220000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
-	};
-
-/include/ "qoriq-sata2-1.dtsi"
-	sata@221000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
-	};
-
-/include/ "qoriq-sec4.2-0.dtsi"
-crypto: crypto@300000 {
-		fsl,iommu-parent = <&pamu1>;
-	};
-};
diff --git a/src/powerpc/fsl/p2041si-pre.dtsi b/src/powerpc/fsl/p2041si-pre.dtsi
deleted file mode 100644
index b1ea147f2995..000000000000
--- a/src/powerpc/fsl/p2041si-pre.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * P2041 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500mc_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P2041";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e500mc@0 {
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_0>;
-			fsl,portid-mapping = <0x80000000>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e500mc@1 {
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&mux1>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x40000000>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu2: PowerPC,e500mc@2 {
-			device_type = "cpu";
-			reg = <2>;
-			clocks = <&mux2>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x20000000>;
-			L2_2: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu3: PowerPC,e500mc@3 {
-			device_type = "cpu";
-			reg = <3>;
-			clocks = <&mux3>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x10000000>;
-			L2_3: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p3041si-post.dtsi b/src/powerpc/fsl/p3041si-post.dtsi
deleted file mode 100644
index cd63cb1b1042..000000000000
--- a/src/powerpc/fsl/p3041si-post.dtsi
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
- * P3041 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <25 2 0 0>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-};
-
-/* controller at 0x200000 */
-&pci0 {
-	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 15>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 15>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 40 1 0 0
-			0000 0 0 2 &mpic 1 1 0 0
-			0000 0 0 3 &mpic 2 1 0 0
-			0000 0 0 4 &mpic 3 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x201000 */
-&pci1 {
-	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 14>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 14>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 41 1 0 0
-			0000 0 0 2 &mpic 5 1 0 0
-			0000 0 0 3 &mpic 6 1 0 0
-			0000 0 0 4 &mpic 7 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x202000 */
-&pci2 {
-	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 13>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 13>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 42 1 0 0
-			0000 0 0 2 &mpic 9 1 0 0
-			0000 0 0 3 &mpic 10 1 0 0
-			0000 0 0 4 &mpic 11 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x203000 */
-&pci3 {
-	compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 12>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 12>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 43 1 0 0
-			0000 0 0 2 &mpic 0 1 0 0
-			0000 0 0 3 &mpic 4 1 0 0
-			0000 0 0 4 &mpic 8 1 0 0
-			>;
-	};
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <16 2 1 11>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	fsl,iommu-parent = <&pamu0>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
-	};
-
-	port2 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <2>;
-		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
-	};
-};
-
-&dcsr {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,dcsr", "simple-bus";
-
-	dcsr-epu@0 {
-		compatible = "fsl,p3041-dcsr-epu", "fsl,dcsr-epu";
-		interrupts = <52 2 0 0
-			      84 2 0 0
-			      85 2 0 0>;
-		reg = <0x0 0x1000>;
-	};
-	dcsr-npc {
-		compatible = "fsl,dcsr-npc";
-		reg = <0x1000 0x1000 0x1000000 0x8000>;
-	};
-	dcsr-nxc@2000 {
-		compatible = "fsl,dcsr-nxc";
-		reg = <0x2000 0x1000>;
-	};
-	dcsr-corenet {
-		compatible = "fsl,dcsr-corenet";
-		reg = <0x8000 0x1000 0xB0000 0x1000>;
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
-		reg = <0x9000 0x1000>;
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
-		reg = <0x11000 0x1000>;
-	};
-	dcsr-ddr@12000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr1>;
-		reg = <0x12000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
-		reg = <0x18000 0x1000>;
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
-		reg = <0x22000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@40000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu0>;
-		reg = <0x40000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@41000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x41000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@42000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu2>;
-		reg = <0x42000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@43000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu3>;
-		reg = <0x43000 0x1000>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000>;
-		interrupts = <16 2 1 27>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
-		ranges = <0 0x20000 0x4000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-		fsl,portid-mapping = <0x0f000000>;
-
-		pamu0: pamu@0 {
-			reg = <0 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu1: pamu@1000 {
-			reg = <0x1000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu2: pamu@2000 {
-			reg = <0x2000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu3: pamu@3000 {
-			reg = <0x3000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-	};
-
-/include/ "qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,qoriq-device-config-1.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		#sleep-cells = <1>;
-		fsl,liodn-bits = <12>;
-	};
-
-	pins: global-utilities@e0e00 {
-		compatible = "fsl,qoriq-pin-control-1.0";
-		reg = <0xe0e00 0x200>;
-		#sleep-cells = <2>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		reg = <0xe1000 0x1000>;
-		clock-frequency = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-1.0";
-			clock-output-names = "sysclk";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1@20 {
-			#clock-cells = <0>;
-			reg = <0x20 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux1";
-		};
-
-		mux2: mux2@40 {
-			#clock-cells = <0>;
-			reg = <0x40 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux2";
-		};
-
-		mux3: mux3@60 {
-			#clock-cells = <0>;
-			reg = <0x60 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux3";
-		};
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,qoriq-rcpm-1.0";
-		reg = <0xe2000 0x1000>;
-		#sleep-cells = <1>;
-	};
-
-	sfp: sfp@e8000 {
-		compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
-		reg	   = <0xe8000 0x1000>;
-	};
-
-	serdes: serdes@ea000 {
-		compatible = "fsl,p3041-serdes";
-		reg	   = <0xea000 0x1000>;
-	};
-
-/include/ "qoriq-dma-0.dtsi"
-	dma@100300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
-	};
-
-/include/ "qoriq-dma-1.dtsi"
-	dma@101300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
-	};
-
-/include/ "qoriq-espi-0.dtsi"
-	spi@110000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "qoriq-esdhc-0.dtsi"
-	sdhc@114000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
-		sdhci,auto-cmd12;
-	};
-
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
-	usb0: usb@210000 {
-		compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
-		phy_type = "utmi";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
-		port0;
-	};
-
-/include/ "qoriq-usb2-dr-0.dtsi"
-	usb1: usb@211000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
-		dr_mode = "host";
-		phy_type = "utmi";
-	};
-
-/include/ "qoriq-sata2-0.dtsi"
-	sata@220000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
-	};
-
-/include/ "qoriq-sata2-1.dtsi"
-	sata@221000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
-	};
-
-/include/ "qoriq-sec4.2-0.dtsi"
-crypto: crypto@300000 {
-		fsl,iommu-parent = <&pamu1>;
-	};
-};
diff --git a/src/powerpc/fsl/p3041si-pre.dtsi b/src/powerpc/fsl/p3041si-pre.dtsi
deleted file mode 100644
index dc5f4b362c24..000000000000
--- a/src/powerpc/fsl/p3041si-pre.dtsi
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * P3041 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500mc_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P3041";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e500mc@0 {
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_0>;
-			fsl,portid-mapping = <0x80000000>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e500mc@1 {
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&mux1>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x40000000>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu2: PowerPC,e500mc@2 {
-			device_type = "cpu";
-			reg = <2>;
-			clocks = <&mux2>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x20000000>;
-			L2_2: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu3: PowerPC,e500mc@3 {
-			device_type = "cpu";
-			reg = <3>;
-			clocks = <&mux3>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x10000000>;
-			L2_3: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p4080si-post.dtsi b/src/powerpc/fsl/p4080si-post.dtsi
deleted file mode 100644
index 12947ccddf25..000000000000
--- a/src/powerpc/fsl/p4080si-post.dtsi
+++ /dev/null
@@ -1,537 +0,0 @@
-/*
- * P4080/P4040 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <25 2 0 0>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-};
-
-/* controller at 0x200000 */
-&pci0 {
-	compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 15>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 15>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 40 1 0 0
-			0000 0 0 2 &mpic 1 1 0 0
-			0000 0 0 3 &mpic 2 1 0 0
-			0000 0 0 4 &mpic 3 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x201000 */
-&pci1 {
-	compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 14>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 14>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 41 1 0 0
-			0000 0 0 2 &mpic 5 1 0 0
-			0000 0 0 3 &mpic 6 1 0 0
-			0000 0 0 4 &mpic 7 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x202000 */
-&pci2 {
-	compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 13>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 13>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 42 1 0 0
-			0000 0 0 2 &mpic 9 1 0 0
-			0000 0 0 3 &mpic 10 1 0 0
-			0000 0 0 4 &mpic 11 1 0 0
-			>;
-	};
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <16 2 1 11>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	fsl,srio-rmu-handle = <&rmu>;
-	fsl,iommu-parent = <&pamu0>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
-	};
-
-	port2 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <2>;
-		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
-	};
-};
-
-&dcsr {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,dcsr", "simple-bus";
-
-	dcsr-epu@0 {
-		compatible = "fsl,p4080-dcsr-epu", "fsl,dcsr-epu";
-		interrupts = <52 2 0 0
-			      84 2 0 0
-			      85 2 0 0>;
-		reg = <0x0 0x1000>;
-	};
-	dcsr-npc {
-		compatible = "fsl,dcsr-npc";
-		reg = <0x1000 0x1000 0x1000000 0x8000>;
-	};
-	dcsr-nxc@2000 {
-		compatible = "fsl,dcsr-nxc";
-		reg = <0x2000 0x1000>;
-	};
-	dcsr-corenet {
-		compatible = "fsl,dcsr-corenet";
-		reg = <0x8000 0x1000 0xB0000 0x1000>;
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
-		reg = <0x9000 0x1000>;
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
-		reg = <0x11000 0x1000>;
-	};
-	dcsr-ddr@12000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr1>;
-		reg = <0x12000 0x1000>;
-	};
-	dcsr-ddr@13000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr2>;
-		reg = <0x13000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
-		reg = <0x18000 0x1000>;
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
-		reg = <0x22000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@40000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu0>;
-		reg = <0x40000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@41000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x41000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@42000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu2>;
-		reg = <0x42000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@43000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu3>;
-		reg = <0x43000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@44000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu4>;
-		reg = <0x44000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@45000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu5>;
-		reg = <0x45000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@46000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu6>;
-		reg = <0x46000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@47000 {
-		compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu7>;
-		reg = <0x47000 0x1000>;
-	};
-
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	ddr2: memory-controller@9000 {
-		compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
-		reg = <0x9000 0x1000>;
-		interrupts = <16 2 1 22>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,p4080-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000
-		       0x11000 0x1000>;
-		interrupts = <16 2 1 27
-			      16 2 1 26>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
-		ranges = <0 0x20000 0x5000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-		fsl,portid-mapping = <0x00f80000>;
-
-		pamu0: pamu@0 {
-			reg = <0 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu1: pamu@1000 {
-			reg = <0x1000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu2: pamu@2000 {
-			reg = <0x2000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu3: pamu@3000 {
-			reg = <0x3000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu4: pamu@4000 {
-			reg = <0x4000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-	};
-
-/include/ "qoriq-rmu-0.dtsi"
-	rmu@d3000 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x540>; /* RMULIODNR */
-	};
-
-/include/ "qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,qoriq-device-config-1.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		#sleep-cells = <1>;
-		fsl,liodn-bits = <12>;
-	};
-
-	pins: global-utilities@e0e00 {
-		compatible = "fsl,qoriq-pin-control-1.0";
-		reg = <0xe0e00 0x200>;
-		#sleep-cells = <2>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		reg = <0xe1000 0x1000>;
-		clock-frequency = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-1.0";
-			clock-output-names = "sysclk";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2";
-		};
-
-		pll2: pll2@840 {
-			#clock-cells = <1>;
-			reg = <0x840 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll2", "pll2-div2";
-		};
-
-		pll3: pll3@860 {
-			#clock-cells = <1>;
-			reg = <0x860 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll3", "pll3-div2";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1@20 {
-			#clock-cells = <0>;
-			reg = <0x20 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux1";
-		};
-
-		mux2: mux2@40 {
-			#clock-cells = <0>;
-			reg = <0x40 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux2";
-		};
-
-		mux3: mux3@60 {
-			#clock-cells = <0>;
-			reg = <0x60 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux3";
-		};
-
-		mux4: mux4@80 {
-			#clock-cells = <0>;
-			reg = <0x80 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
-			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
-			clock-output-names = "cmux4";
-		};
-
-		mux5: mux5@a0 {
-			#clock-cells = <0>;
-			reg = <0xa0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
-			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
-			clock-output-names = "cmux5";
-		};
-
-		mux6: mux6@c0 {
-			#clock-cells = <0>;
-			reg = <0xc0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
-			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
-			clock-output-names = "cmux6";
-		};
-
-		mux7: mux7@e0 {
-			#clock-cells = <0>;
-			reg = <0xe0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
-			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
-			clock-output-names = "cmux7";
-		};
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,qoriq-rcpm-1.0";
-		reg = <0xe2000 0x1000>;
-		#sleep-cells = <1>;
-	};
-
-	sfp: sfp@e8000 {
-		compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
-		reg	   = <0xe8000 0x1000>;
-	};
-
-	serdes: serdes@ea000 {
-		compatible = "fsl,p4080-serdes";
-		reg	   = <0xea000 0x1000>;
-	};
-
-/include/ "qoriq-dma-0.dtsi"
-	dma@100300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
-	};
-
-/include/ "qoriq-dma-1.dtsi"
-	dma@101300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
-	};
-
-/include/ "qoriq-espi-0.dtsi"
-	spi@110000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "qoriq-esdhc-0.dtsi"
-	sdhc@114000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
-		voltage-ranges = <3300 3300>;
-		sdhci,auto-cmd12;
-	};
-
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
-	usb@210000 {
-		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
-		port0;
-	};
-/include/ "qoriq-usb2-dr-0.dtsi"
-	usb@211000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
-	};
-/include/ "qoriq-sec4.0-0.dtsi"
-crypto: crypto@300000 {
-		fsl,iommu-parent = <&pamu1>;
-	};
-};
diff --git a/src/powerpc/fsl/p4080si-pre.dtsi b/src/powerpc/fsl/p4080si-pre.dtsi
deleted file mode 100644
index 38bde0958672..000000000000
--- a/src/powerpc/fsl/p4080si-pre.dtsi
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * P4080/P4040 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e500mc_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P4080";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e500mc@0 {
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_0>;
-			fsl,portid-mapping = <0x80000000>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e500mc@1 {
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&mux1>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x40000000>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu2: PowerPC,e500mc@2 {
-			device_type = "cpu";
-			reg = <2>;
-			clocks = <&mux2>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x20000000>;
-			L2_2: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu3: PowerPC,e500mc@3 {
-			device_type = "cpu";
-			reg = <3>;
-			clocks = <&mux3>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x10000000>;
-			L2_3: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu4: PowerPC,e500mc@4 {
-			device_type = "cpu";
-			reg = <4>;
-			clocks = <&mux4>;
-			next-level-cache = <&L2_4>;
-			fsl,portid-mapping = <0x08000000>;
-			L2_4: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu5: PowerPC,e500mc@5 {
-			device_type = "cpu";
-			reg = <5>;
-			clocks = <&mux5>;
-			next-level-cache = <&L2_5>;
-			fsl,portid-mapping = <0x04000000>;
-			L2_5: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu6: PowerPC,e500mc@6 {
-			device_type = "cpu";
-			reg = <6>;
-			clocks = <&mux6>;
-			next-level-cache = <&L2_6>;
-			fsl,portid-mapping = <0x02000000>;
-			L2_6: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu7: PowerPC,e500mc@7 {
-			device_type = "cpu";
-			reg = <7>;
-			clocks = <&mux7>;
-			next-level-cache = <&L2_7>;
-			fsl,portid-mapping = <0x01000000>;
-			L2_7: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p5020si-post.dtsi b/src/powerpc/fsl/p5020si-post.dtsi
deleted file mode 100644
index 4c4a2b0436b2..000000000000
--- a/src/powerpc/fsl/p5020si-post.dtsi
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * P5020/5010 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <25 2 0 0>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-};
-
-/* controller at 0x200000 */
-&pci0 {
-	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 15>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 15>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 40 1 0 0
-			0000 0 0 2 &mpic 1 1 0 0
-			0000 0 0 3 &mpic 2 1 0 0
-			0000 0 0 4 &mpic 3 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x201000 */
-&pci1 {
-	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 14>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 14>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 41 1 0 0
-			0000 0 0 2 &mpic 5 1 0 0
-			0000 0 0 3 &mpic 6 1 0 0
-			0000 0 0 4 &mpic 7 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x202000 */
-&pci2 {
-	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 13>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 13>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 42 1 0 0
-			0000 0 0 2 &mpic 9 1 0 0
-			0000 0 0 3 &mpic 10 1 0 0
-			0000 0 0 4 &mpic 11 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x203000 */
-&pci3 {
-	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 12>;
-	fsl,iommu-parent = <&pamu0>;
-	fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 12>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 43 1 0 0
-			0000 0 0 2 &mpic 0 1 0 0
-			0000 0 0 3 &mpic 4 1 0 0
-			0000 0 0 4 &mpic 8 1 0 0
-			>;
-	};
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <16 2 1 11>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	fsl,iommu-parent = <&pamu0>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-		fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */
-	};
-
-	port2 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <2>;
-		fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */
-	};
-};
-
-&dcsr {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,dcsr", "simple-bus";
-
-	dcsr-epu@0 {
-		compatible = "fsl,p5020-dcsr-epu", "fsl,dcsr-epu";
-		interrupts = <52 2 0 0
-			      84 2 0 0
-			      85 2 0 0>;
-		reg = <0x0 0x1000>;
-	};
-	dcsr-npc {
-		compatible = "fsl,dcsr-npc";
-		reg = <0x1000 0x1000 0x1000000 0x8000>;
-	};
-	dcsr-nxc@2000 {
-		compatible = "fsl,dcsr-nxc";
-		reg = <0x2000 0x1000>;
-	};
-	dcsr-corenet {
-		compatible = "fsl,dcsr-corenet";
-		reg = <0x8000 0x1000 0xB0000 0x1000>;
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
-		reg = <0x9000 0x1000>;
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
-		reg = <0x11000 0x1000>;
-	};
-	dcsr-ddr@12000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr1>;
-		reg = <0x12000 0x1000>;
-	};
-	dcsr-ddr@13000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr2>;
-		reg = <0x13000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
-		reg = <0x18000 0x1000>;
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
-		reg = <0x22000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@40000 {
-		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu0>;
-		reg = <0x40000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@41000 {
-		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x41000 0x1000>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	ddr2: memory-controller@9000 {
-		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
-		reg = <0x9000 0x1000>;
-		interrupts = <16 2 1 22>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000
-		       0x11000 0x1000>;
-		interrupts = <16 2 1 27
-			      16 2 1 26>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */
-		ranges = <0 0x20000 0x4000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-		fsl,portid-mapping = <0x3c000000>;
-
-		pamu0: pamu@0 {
-			reg = <0 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu1: pamu@1000 {
-			reg = <0x1000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu2: pamu@2000 {
-			reg = <0x2000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu3: pamu@3000 {
-			reg = <0x3000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-	};
-
-/include/ "qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,qoriq-device-config-1.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		#sleep-cells = <1>;
-		fsl,liodn-bits = <12>;
-	};
-
-	pins: global-utilities@e0e00 {
-		compatible = "fsl,qoriq-pin-control-1.0";
-		reg = <0xe0e00 0x200>;
-		#sleep-cells = <2>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		reg = <0xe1000 0x1000>;
-		clock-frequency = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-1.0";
-			clock-output-names = "sysclk";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1@20 {
-			#clock-cells = <0>;
-			reg = <0x20 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux1";
-		};
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,qoriq-rcpm-1.0";
-		reg = <0xe2000 0x1000>;
-		#sleep-cells = <1>;
-	};
-
-	sfp: sfp@e8000 {
-		compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
-		reg	   = <0xe8000 0x1000>;
-	};
-
-	serdes: serdes@ea000 {
-		compatible = "fsl,p5020-serdes";
-		reg	   = <0xea000 0x1000>;
-	};
-
-/include/ "qoriq-dma-0.dtsi"
-	dma@100300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
-	};
-
-/include/ "qoriq-dma-1.dtsi"
-	dma@101300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
-	};
-
-/include/ "qoriq-espi-0.dtsi"
-	spi@110000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "qoriq-esdhc-0.dtsi"
-	sdhc@114000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
-		sdhci,auto-cmd12;
-	};
-
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
-	usb0: usb@210000 {
-		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
-		phy_type = "utmi";
-		port0;
-	};
-
-/include/ "qoriq-usb2-dr-0.dtsi"
-	usb1: usb@211000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
-		dr_mode = "host";
-		phy_type = "utmi";
-	};
-
-/include/ "qoriq-sata2-0.dtsi"
-	sata@220000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
-	};
-
-/include/ "qoriq-sata2-1.dtsi"
-	sata@221000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
-	};
-/include/ "qoriq-sec4.2-0.dtsi"
-	crypto@300000 {
-		fsl,iommu-parent = <&pamu1>;
-	};
-
-/include/ "qoriq-raid1.0-0.dtsi"
-	raideng@320000 {
-		fsl,iommu-parent = <&pamu1>;
-	};
-};
diff --git a/src/powerpc/fsl/p5020si-pre.dtsi b/src/powerpc/fsl/p5020si-pre.dtsi
deleted file mode 100644
index 1cc61e126e4c..000000000000
--- a/src/powerpc/fsl/p5020si-pre.dtsi
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * P5020/P5010 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e5500_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P5020";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-
-		raideng = &raideng;
-		raideng_jr0 = &raideng_jr0;
-		raideng_jr1 = &raideng_jr1;
-		raideng_jr2 = &raideng_jr2;
-		raideng_jr3 = &raideng_jr3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e5500@0 {
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_0>;
-			fsl,portid-mapping = <0x80000000>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e5500@1 {
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&mux1>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x40000000>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/fsl/p5040si-post.dtsi b/src/powerpc/fsl/p5040si-post.dtsi
deleted file mode 100644
index 67296fdd9698..000000000000
--- a/src/powerpc/fsl/p5040si-post.dtsi
+++ /dev/null
@@ -1,446 +0,0 @@
-/*
- * P5040 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of this
- * software, even if advised of the possibility of such damage.
- */
-
-&lbc {
-	compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <25 2 0 0>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-};
-
-/* controller at 0x200000 */
-&pci0 {
-	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 15>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 15>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 40 1 0 0
-			0000 0 0 2 &mpic 1 1 0 0
-			0000 0 0 3 &mpic 2 1 0 0
-			0000 0 0 4 &mpic 3 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x201000 */
-&pci1 {
-	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 14>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 14>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 41 1 0 0
-			0000 0 0 2 &mpic 5 1 0 0
-			0000 0 0 3 &mpic 6 1 0 0
-			0000 0 0 4 &mpic 7 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x202000 */
-&pci2 {
-	compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	clock-frequency = <33333333>;
-	interrupts = <16 2 1 13>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <16 2 1 13>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 42 1 0 0
-			0000 0 0 2 &mpic 9 1 0 0
-			0000 0 0 3 &mpic 10 1 0 0
-			0000 0 0 4 &mpic 11 1 0 0
-			>;
-	};
-};
-
-&dcsr {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,dcsr", "simple-bus";
-
-	dcsr-epu@0 {
-		compatible = "fsl,p5040-dcsr-epu", "fsl,dcsr-epu";
-		interrupts = <52 2 0 0
-			      84 2 0 0
-			      85 2 0 0>;
-		reg = <0x0 0x1000>;
-	};
-	dcsr-npc {
-		compatible = "fsl,dcsr-npc";
-		reg = <0x1000 0x1000 0x1000000 0x8000>;
-	};
-	dcsr-nxc@2000 {
-		compatible = "fsl,dcsr-nxc";
-		reg = <0x2000 0x1000>;
-	};
-	dcsr-corenet {
-		compatible = "fsl,dcsr-corenet";
-		reg = <0x8000 0x1000 0xB0000 0x1000>;
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa";
-		reg = <0x9000 0x1000>;
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn";
-		reg = <0x11000 0x1000>;
-	};
-	dcsr-ddr@12000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr1>;
-		reg = <0x12000 0x1000>;
-	};
-	dcsr-ddr@13000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr2>;
-		reg = <0x13000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal";
-		reg = <0x18000 0x1000>;
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm";
-		reg = <0x22000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@40000 {
-		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu0>;
-		reg = <0x40000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@41000 {
-		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x41000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@42000 {
-		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu2>;
-		reg = <0x42000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@43000 {
-		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu3>;
-		reg = <0x43000 0x1000>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	ddr2: memory-controller@9000 {
-		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
-		reg = <0x9000 0x1000>;
-		interrupts = <16 2 1 22>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000
-		       0x11000 0x1000>;
-		interrupts = <16 2 1 27
-			      16 2 1 26>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */
-		ranges = <0 0x20000 0x5000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <24 2 0 0
-			      16 2 1 30>;
-		fsl,portid-mapping = <0x0f800000>;
-
-		pamu0: pamu@0 {
-			reg = <0 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu1: pamu@1000 {
-			reg = <0x1000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu2: pamu@2000 {
-			reg = <0x2000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu3: pamu@3000 {
-			reg = <0x3000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu4: pamu@4000 {
-			reg = <0x4000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-	};
-
-/include/ "qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		#sleep-cells = <1>;
-		fsl,liodn-bits = <12>;
-	};
-
-	pins: global-utilities@e0e00 {
-		compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0";
-		reg = <0xe0e00 0x200>;
-		#sleep-cells = <2>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		reg = <0xe1000 0x1000>;
-		clock-frequency = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-1.0";
-			clock-output-names = "sysclk";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1@20 {
-			#clock-cells = <0>;
-			reg = <0x20 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux1";
-		};
-
-		mux2: mux2@40 {
-			#clock-cells = <0>;
-			reg = <0x40 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux2";
-		};
-
-		mux3: mux3@60 {
-			#clock-cells = <0>;
-			reg = <0x60 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux3";
-		};
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0";
-		reg = <0xe2000 0x1000>;
-		#sleep-cells = <1>;
-	};
-
-	sfp: sfp@e8000 {
-		compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0";
-		reg	   = <0xe8000 0x1000>;
-	};
-
-	serdes: serdes@ea000 {
-		compatible = "fsl,p5040-serdes";
-		reg	   = <0xea000 0x1000>;
-	};
-
-/include/ "qoriq-dma-0.dtsi"
-	dma@100300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
-	};
-
-/include/ "qoriq-dma-1.dtsi"
-	dma@101300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
-	};
-
-/include/ "qoriq-espi-0.dtsi"
-	spi@110000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "qoriq-esdhc-0.dtsi"
-	sdhc@114000 {
-		fsl,iommu-parent = <&pamu2>;
-		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
-		sdhci,auto-cmd12;
-	};
-
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
-	usb0: usb@210000 {
-		compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-		fsl,iommu-parent = <&pamu4>;
-		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
-		phy_type = "utmi";
-		port0;
-	};
-
-/include/ "qoriq-usb2-dr-0.dtsi"
-	usb1: usb@211000 {
-		compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-		fsl,iommu-parent = <&pamu4>;
-		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
-		dr_mode = "host";
-		phy_type = "utmi";
-	};
-
-/include/ "qoriq-sata2-0.dtsi"
-	sata@220000 {
-		fsl,iommu-parent = <&pamu4>;
-		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
-	};
-
-/include/ "qoriq-sata2-1.dtsi"
-	sata@221000 {
-		fsl,iommu-parent = <&pamu4>;
-		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
-	};
-
-/include/ "qoriq-sec5.2-0.dtsi"
-	crypto@300000 {
-		fsl,iommu-parent = <&pamu4>;
-	};
-};
diff --git a/src/powerpc/fsl/p5040si-pre.dtsi b/src/powerpc/fsl/p5040si-pre.dtsi
deleted file mode 100644
index b048a2be05a8..000000000000
--- a/src/powerpc/fsl/p5040si-pre.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * P5040 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of this
- * software, even if advised of the possibility of such damage.
- */
-
-/dts-v1/;
-
-/include/ "e5500_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,P5040";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		sdhc = &sdhc;
-		msi0 = &msi0;
-		msi1 = &msi1;
-		msi2 = &msi2;
-
-		crypto = &crypto;
-		sec_jr0 = &sec_jr0;
-		sec_jr1 = &sec_jr1;
-		sec_jr2 = &sec_jr2;
-		sec_jr3 = &sec_jr3;
-		rtic_a = &rtic_a;
-		rtic_b = &rtic_b;
-		rtic_c = &rtic_c;
-		rtic_d = &rtic_d;
-		sec_mon = &sec_mon;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e5500@0 {
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_0>;
-			fsl,portid-mapping = <0x80000000>;
-			L2_0: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e5500@1 {
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&mux1>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x40000000>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu2: PowerPC,e5500@2 {
-			device_type = "cpu";
-			reg = <2>;
-			clocks = <&mux2>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x20000000>;
-			L2_2: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu3: PowerPC,e5500@3 {
-			device_type = "cpu";
-			reg = <3>;
-			clocks = <&mux3>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x10000000>;
-			L2_3: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/fsl/pq3-dma-0.dtsi b/src/powerpc/fsl/pq3-dma-0.dtsi
deleted file mode 100644
index b5b37ad30e75..000000000000
--- a/src/powerpc/fsl/pq3-dma-0.dtsi
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * PQ3 DMA device tree stub [ controller @ offset 0x21000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-dma@21300 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,eloplus-dma";
-	reg = <0x21300 0x4>;
-	ranges = <0x0 0x21100 0x200>;
-	cell-index = <0>;
-	dma-channel@0 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x0 0x80>;
-		cell-index = <0>;
-		interrupts = <20 2 0 0>;
-	};
-	dma-channel@80 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x80 0x80>;
-		cell-index = <1>;
-		interrupts = <21 2 0 0>;
-	};
-	dma-channel@100 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x100 0x80>;
-		cell-index = <2>;
-		interrupts = <22 2 0 0>;
-	};
-	dma-channel@180 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x180 0x80>;
-		cell-index = <3>;
-		interrupts = <23 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/pq3-dma-1.dtsi b/src/powerpc/fsl/pq3-dma-1.dtsi
deleted file mode 100644
index 28cb8a55d807..000000000000
--- a/src/powerpc/fsl/pq3-dma-1.dtsi
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * PQ3 DMA device tree stub [ controller @ offset 0xc300 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-dma@c300 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,eloplus-dma";
-	reg = <0xc300 0x4>;
-	ranges = <0x0 0xc100 0x200>;
-	cell-index = <1>;
-	dma-channel@0 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x0 0x80>;
-		cell-index = <0>;
-		interrupts = <76 2 0 0>;
-	};
-	dma-channel@80 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x80 0x80>;
-		cell-index = <1>;
-		interrupts = <77 2 0 0>;
-	};
-	dma-channel@100 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x100 0x80>;
-		cell-index = <2>;
-		interrupts = <78 2 0 0>;
-	};
-	dma-channel@180 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x180 0x80>;
-		cell-index = <3>;
-		interrupts = <79 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/pq3-duart-0.dtsi b/src/powerpc/fsl/pq3-duart-0.dtsi
deleted file mode 100644
index 5e268fdb9d1f..000000000000
--- a/src/powerpc/fsl/pq3-duart-0.dtsi
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * PQ3 DUART device tree stub [ controller @ offset 0x4000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-serial0: serial@4500 {
-	cell-index = <0>;
-	device_type = "serial";
-	compatible = "fsl,ns16550", "ns16550";
-	reg = <0x4500 0x100>;
-	clock-frequency = <0>;
-	interrupts = <42 2 0 0>;
-};
-
-serial1: serial@4600 {
-	cell-index = <1>;
-	device_type = "serial";
-	compatible = "fsl,ns16550", "ns16550";
-	reg = <0x4600 0x100>;
-	clock-frequency = <0>;
-	interrupts = <42 2 0 0>;
-};
diff --git a/src/powerpc/fsl/pq3-esdhc-0.dtsi b/src/powerpc/fsl/pq3-esdhc-0.dtsi
deleted file mode 100644
index 5743433e278e..000000000000
--- a/src/powerpc/fsl/pq3-esdhc-0.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-sdhc@2e000 {
-	compatible = "fsl,esdhc";
-	reg = <0x2e000 0x1000>;
-	interrupts = <72 0x2 0 0>;
-	/* Filled in by U-Boot */
-	clock-frequency = <0>;
-};
diff --git a/src/powerpc/fsl/pq3-espi-0.dtsi b/src/powerpc/fsl/pq3-espi-0.dtsi
deleted file mode 100644
index 75854b2e0391..000000000000
--- a/src/powerpc/fsl/pq3-espi-0.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-spi@7000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,mpc8536-espi";
-	reg = <0x7000 0x1000>;
-	interrupts = <59 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/pq3-etsec1-0.dtsi b/src/powerpc/fsl/pq3-etsec1-0.dtsi
deleted file mode 100644
index 3b0650a98478..000000000000
--- a/src/powerpc/fsl/pq3-etsec1-0.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-ethernet@24000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	cell-index = <0>;
-	device_type = "network";
-	model = "eTSEC";
-	compatible = "gianfar";
-	reg = <0x24000 0x1000>;
-	ranges = <0x0 0x24000 0x1000>;
-	fsl,magic-packet;
-	local-mac-address = [ 00 00 00 00 00 00 ];
-	interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
-};
-
-mdio@24520 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,gianfar-mdio";
-	reg = <0x24520 0x20>;
-};
diff --git a/src/powerpc/fsl/pq3-etsec1-1.dtsi b/src/powerpc/fsl/pq3-etsec1-1.dtsi
deleted file mode 100644
index 96693b41f0f1..000000000000
--- a/src/powerpc/fsl/pq3-etsec1-1.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-ethernet@25000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	cell-index = <1>;
-	device_type = "network";
-	model = "eTSEC";
-	compatible = "gianfar";
-	reg = <0x25000 0x1000>;
-	ranges = <0x0 0x25000 0x1000>;
-	fsl,magic-packet;
-	local-mac-address = [ 00 00 00 00 00 00 ];
-	interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
-};
-
-mdio@25520 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,gianfar-tbi";
-	reg = <0x25520 0x20>;
-};
diff --git a/src/powerpc/fsl/pq3-etsec1-2.dtsi b/src/powerpc/fsl/pq3-etsec1-2.dtsi
deleted file mode 100644
index 6b3fab19da1f..000000000000
--- a/src/powerpc/fsl/pq3-etsec1-2.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-ethernet@26000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	cell-index = <2>;
-	device_type = "network";
-	model = "eTSEC";
-	compatible = "gianfar";
-	reg = <0x26000 0x1000>;
-	ranges = <0x0 0x26000 0x1000>;
-	fsl,magic-packet;
-	local-mac-address = [ 00 00 00 00 00 00 ];
-	interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
-};
-
-mdio@26520 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,gianfar-tbi";
-	reg = <0x26520 0x20>;
-};
diff --git a/src/powerpc/fsl/pq3-etsec1-3.dtsi b/src/powerpc/fsl/pq3-etsec1-3.dtsi
deleted file mode 100644
index 0da592d93ddd..000000000000
--- a/src/powerpc/fsl/pq3-etsec1-3.dtsi
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-ethernet@27000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	cell-index = <3>;
-	device_type = "network";
-	model = "eTSEC";
-	compatible = "gianfar";
-	reg = <0x27000 0x1000>;
-	ranges = <0x0 0x27000 0x1000>;
-	fsl,magic-packet;
-	local-mac-address = [ 00 00 00 00 00 00 ];
-	interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
-};
-
-mdio@27520 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,gianfar-tbi";
-	reg = <0x27520 0x20>;
-};
diff --git a/src/powerpc/fsl/pq3-etsec1-timer-0.dtsi b/src/powerpc/fsl/pq3-etsec1-timer-0.dtsi
deleted file mode 100644
index efe2ca04bce8..000000000000
--- a/src/powerpc/fsl/pq3-etsec1-timer-0.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-ptp_clock@24e00 {
-	compatible = "fsl,etsec-ptp";
-	reg = <0x24e00 0xb0>;
-	interrupts = <68 2 0 0 69 2 0 0>;
-};
diff --git a/src/powerpc/fsl/pq3-etsec2-0.dtsi b/src/powerpc/fsl/pq3-etsec2-0.dtsi
deleted file mode 100644
index 1382fec9e8c5..000000000000
--- a/src/powerpc/fsl/pq3-etsec2-0.dtsi
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-mdio@24000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,etsec2-mdio";
-	reg = <0x24000 0x1000 0xb0030 0x4>;
-};
-
-ethernet@b0000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "network";
-	model = "eTSEC";
-	compatible = "fsl,etsec2";
-	fsl,num_rx_queues = <0x8>;
-	fsl,num_tx_queues = <0x8>;
-	fsl,magic-packet;
-	local-mac-address = [ 00 00 00 00 00 00 ];
-
-	queue-group@b0000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xb0000 0x1000>;
-		interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/pq3-etsec2-1.dtsi b/src/powerpc/fsl/pq3-etsec2-1.dtsi
deleted file mode 100644
index 221cd2ea5b31..000000000000
--- a/src/powerpc/fsl/pq3-etsec2-1.dtsi
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-
-mdio@25000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,etsec2-tbi";
-	reg = <0x25000 0x1000 0xb1030 0x4>;
-};
-
-ethernet@b1000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "network";
-	model = "eTSEC";
-	compatible = "fsl,etsec2";
-	fsl,num_rx_queues = <0x8>;
-	fsl,num_tx_queues = <0x8>;
-	fsl,magic-packet;
-	local-mac-address = [ 00 00 00 00 00 00 ];
-
-	queue-group@b1000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xb1000 0x1000>;
-		interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/pq3-etsec2-2.dtsi b/src/powerpc/fsl/pq3-etsec2-2.dtsi
deleted file mode 100644
index 61456c317609..000000000000
--- a/src/powerpc/fsl/pq3-etsec2-2.dtsi
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-mdio@26000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,etsec2-tbi";
-	reg = <0x26000 0x1000 0xb1030 0x4>;
-};
-
-ethernet@b2000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "network";
-	model = "eTSEC";
-	compatible = "fsl,etsec2";
-	fsl,num_rx_queues = <0x8>;
-	fsl,num_tx_queues = <0x8>;
-	fsl,magic-packet;
-	local-mac-address = [ 00 00 00 00 00 00 ];
-
-	queue-group@b2000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xb2000 0x1000>;
-		interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/pq3-etsec2-grp2-0.dtsi b/src/powerpc/fsl/pq3-etsec2-grp2-0.dtsi
deleted file mode 100644
index 034ab8fac22f..000000000000
--- a/src/powerpc/fsl/pq3-etsec2-grp2-0.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&enet0_grp2 {
-	queue-group@b4000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xb4000 0x1000>;
-		interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/pq3-etsec2-grp2-1.dtsi b/src/powerpc/fsl/pq3-etsec2-grp2-1.dtsi
deleted file mode 100644
index 3be9ba3b374e..000000000000
--- a/src/powerpc/fsl/pq3-etsec2-grp2-1.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&enet1_grp2 {
-	queue-group@b5000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xb5000 0x1000>;
-		interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/pq3-etsec2-grp2-2.dtsi b/src/powerpc/fsl/pq3-etsec2-grp2-2.dtsi
deleted file mode 100644
index 02a33457048c..000000000000
--- a/src/powerpc/fsl/pq3-etsec2-grp2-2.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&enet2_grp2 {
-	queue-group@b6000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xb6000 0x1000>;
-		interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/pq3-gpio-0.dtsi b/src/powerpc/fsl/pq3-gpio-0.dtsi
deleted file mode 100644
index 72a3ef5945c1..000000000000
--- a/src/powerpc/fsl/pq3-gpio-0.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * PQ3 GPIO device tree stub [ controller @ offset 0xf000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-gpio-controller@f000 {
-	#gpio-cells = <2>;
-	compatible = "fsl,pq3-gpio";
-	reg = <0xf000 0x100>;
-	interrupts = <47 0x2 0 0>;
-	gpio-controller;
-};
diff --git a/src/powerpc/fsl/pq3-i2c-0.dtsi b/src/powerpc/fsl/pq3-i2c-0.dtsi
deleted file mode 100644
index d1dd6fb82a78..000000000000
--- a/src/powerpc/fsl/pq3-i2c-0.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * PQ3 I2C device tree stub [ controller @ offset 0x3000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-i2c@3000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	cell-index = <0>;
-	compatible = "fsl-i2c";
-	reg = <0x3000 0x100>;
-	interrupts = <43 2 0 0>;
-	dfsrr;
-};
diff --git a/src/powerpc/fsl/pq3-i2c-1.dtsi b/src/powerpc/fsl/pq3-i2c-1.dtsi
deleted file mode 100644
index a9bd803e2090..000000000000
--- a/src/powerpc/fsl/pq3-i2c-1.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-i2c@3100 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	cell-index = <1>;
-	compatible = "fsl-i2c";
-	reg = <0x3100 0x100>;
-	interrupts = <43 2 0 0>;
-	dfsrr;
-};
diff --git a/src/powerpc/fsl/pq3-mpic-message-B.dtsi b/src/powerpc/fsl/pq3-mpic-message-B.dtsi
deleted file mode 100644
index 1cf0b77b1efe..000000000000
--- a/src/powerpc/fsl/pq3-mpic-message-B.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * PQ3 MPIC Message (Group B) device tree stub [ controller @ offset 0x42400 ]
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-message@42400 {
-	compatible = "fsl,mpic-v3.1-msgr";
-	reg = <0x42400 0x200>;
-	interrupts = <
-		0xb4 2 0 0
-		0xb5 2 0 0
-		0xb6 2 0 0
-		0xb7 2 0 0>;
-};
diff --git a/src/powerpc/fsl/pq3-mpic-timer-B.dtsi b/src/powerpc/fsl/pq3-mpic-timer-B.dtsi
deleted file mode 100644
index 8734cffae1a1..000000000000
--- a/src/powerpc/fsl/pq3-mpic-timer-B.dtsi
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-timer@42100 {
-	compatible = "fsl,mpic-global-timer";
-	reg = <0x42100 0x100 0x42300 4>;
-	interrupts = <4 0 3 0
-		      5 0 3 0
-		      6 0 3 0
-		      7 0 3 0>;
-};
diff --git a/src/powerpc/fsl/pq3-mpic.dtsi b/src/powerpc/fsl/pq3-mpic.dtsi
deleted file mode 100644
index 71c30eb10056..000000000000
--- a/src/powerpc/fsl/pq3-mpic.dtsi
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-mpic: pic@40000 {
-	interrupt-controller;
-	#address-cells = <0>;
-	#interrupt-cells = <4>;
-	reg = <0x40000 0x40000>;
-	compatible = "fsl,mpic";
-	device_type = "open-pic";
-	big-endian;
-	single-cpu-affinity;
-	last-interrupt-source = <255>;
-};
-
-timer@41100 {
-	compatible = "fsl,mpic-global-timer";
-	reg = <0x41100 0x100 0x41300 4>;
-	interrupts = <0 0 3 0
-		      1 0 3 0
-		      2 0 3 0
-		      3 0 3 0>;
-};
-
-message@41400 {
-	compatible = "fsl,mpic-v3.1-msgr";
-	reg = <0x41400 0x200>;
-	interrupts = <
-		0xb0 2 0 0
-		0xb1 2 0 0
-		0xb2 2 0 0
-		0xb3 2 0 0>;
-};
-
-msi@41600 {
-	compatible = "fsl,mpic-msi";
-	reg = <0x41600 0x80>;
-	msi-available-ranges = <0 0x100>;
-	interrupts = <
-		0xe0 0 0 0
-		0xe1 0 0 0
-		0xe2 0 0 0
-		0xe3 0 0 0
-		0xe4 0 0 0
-		0xe5 0 0 0
-		0xe6 0 0 0
-		0xe7 0 0 0>;
-};
diff --git a/src/powerpc/fsl/pq3-rmu-0.dtsi b/src/powerpc/fsl/pq3-rmu-0.dtsi
deleted file mode 100644
index 587ca9ffad7d..000000000000
--- a/src/powerpc/fsl/pq3-rmu-0.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-rmu: rmu@d3000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,srio-rmu";
-	reg = <0xd3000 0x500>;
-	ranges = <0x0 0xd3000 0x500>;
-
-	message-unit@0 {
-		compatible = "fsl,srio-msg-unit";
-		reg = <0x0 0x100>;
-		interrupts = <
-			53 2 0 0 /* msg1_tx_irq */
-			54 2 0 0>;/* msg1_rx_irq */
-	};
-	message-unit@100 {
-		compatible = "fsl,srio-msg-unit";
-		reg = <0x100 0x100>;
-		interrupts = <
-			55 2 0 0  /* msg2_tx_irq */
-			56 2 0 0>;/* msg2_rx_irq */
-	};
-	doorbell-unit@400 {
-		compatible = "fsl,srio-dbell-unit";
-		reg = <0x400 0x80>;
-		interrupts = <
-			49 2 0 0  /* bell_outb_irq */
-			50 2 0 0>;/* bell_inb_irq */
-	};
-	port-write-unit@4e0 {
-		compatible = "fsl,srio-port-write-unit";
-		reg = <0x4e0 0x20>;
-		interrupts = <48 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/pq3-sata2-0.dtsi b/src/powerpc/fsl/pq3-sata2-0.dtsi
deleted file mode 100644
index 3c28dd08d38b..000000000000
--- a/src/powerpc/fsl/pq3-sata2-0.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-sata@18000 {
-	compatible = "fsl,pq-sata-v2";
-	reg = <0x18000 0x1000>;
-	cell-index = <1>;
-	interrupts = <74 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/pq3-sata2-1.dtsi b/src/powerpc/fsl/pq3-sata2-1.dtsi
deleted file mode 100644
index eefaf2855e3b..000000000000
--- a/src/powerpc/fsl/pq3-sata2-1.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-sata@19000 {
-	compatible = "fsl,pq-sata-v2";
-	reg = <0x19000 0x1000>;
-	cell-index = <2>;
-	interrupts = <41 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/pq3-sec2.1-0.dtsi b/src/powerpc/fsl/pq3-sec2.1-0.dtsi
deleted file mode 100644
index 02a5c7ae72d0..000000000000
--- a/src/powerpc/fsl/pq3-sec2.1-0.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-crypto@30000 {
-	compatible = "fsl,sec2.1", "fsl,sec2.0";
-	reg = <0x30000 0x10000>;
-	interrupts = <45 2 0 0>;
-	fsl,num-channels = <4>;
-	fsl,channel-fifo-len = <24>;
-	fsl,exec-units-mask = <0xfe>;
-	fsl,descriptor-types-mask = <0x12b0ebf>;
-};
diff --git a/src/powerpc/fsl/pq3-sec3.0-0.dtsi b/src/powerpc/fsl/pq3-sec3.0-0.dtsi
deleted file mode 100644
index bba1ba44ccf0..000000000000
--- a/src/powerpc/fsl/pq3-sec3.0-0.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-crypto@30000 {
-	compatible = "fsl,sec3.0",
-		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
-		     "fsl,sec2.0";
-	reg = <0x30000 0x10000>;
-	interrupts = <45 2 0 0 58 2 0 0>;
-	fsl,num-channels = <4>;
-	fsl,channel-fifo-len = <24>;
-	fsl,exec-units-mask = <0x9fe>;
-	fsl,descriptor-types-mask = <0x3ab0ebf>;
-};
diff --git a/src/powerpc/fsl/pq3-sec3.1-0.dtsi b/src/powerpc/fsl/pq3-sec3.1-0.dtsi
deleted file mode 100644
index 8f0a5669bee5..000000000000
--- a/src/powerpc/fsl/pq3-sec3.1-0.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-crypto@30000 {
-	compatible = "fsl,sec3.1", "fsl,sec3.0",
-		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
-		     "fsl,sec2.0";
-	reg = <0x30000 0x10000>;
-	interrupts = <45 2 0 0 58 2 0 0>;
-	fsl,num-channels = <4>;
-	fsl,channel-fifo-len = <24>;
-	fsl,exec-units-mask = <0xbfe>;
-	fsl,descriptor-types-mask = <0x3ab0ebf>;
-};
diff --git a/src/powerpc/fsl/pq3-sec3.3-0.dtsi b/src/powerpc/fsl/pq3-sec3.3-0.dtsi
deleted file mode 100644
index c227f2748a24..000000000000
--- a/src/powerpc/fsl/pq3-sec3.3-0.dtsi
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-crypto@30000 {
-	compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
-		     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
-		     "fsl,sec2.0";
-	reg = <0x30000 0x10000>;
-	interrupts = <45 2 0 0 58 2 0 0>;
-	fsl,num-channels = <4>;
-	fsl,channel-fifo-len = <24>;
-	fsl,exec-units-mask = <0x97c>;
-	fsl,descriptor-types-mask = <0x3a30abf>;
-};
diff --git a/src/powerpc/fsl/pq3-sec4.4-0.dtsi b/src/powerpc/fsl/pq3-sec4.4-0.dtsi
deleted file mode 100644
index bb3d8266b5ce..000000000000
--- a/src/powerpc/fsl/pq3-sec4.4-0.dtsi
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-crypto@30000 {
-	compatible = "fsl,sec-v4.4", "fsl,sec-v4.0";
-	fsl,sec-era = <3>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges		 = <0x0 0x30000 0x10000>;
-	reg		 = <0x30000 0x10000>;
-	interrupts	 = <58 2 0 0>;
-
-	sec_jr0: jr@1000 {
-		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
-		reg	   = <0x1000 0x1000>;
-		interrupts	 = <45 2 0 0>;
-	};
-
-	sec_jr1: jr@2000 {
-		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
-		reg	   = <0x2000 0x1000>;
-		interrupts	 = <45 2 0 0>;
-	};
-
-	sec_jr2: jr@3000 {
-		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
-		reg	   = <0x3000 0x1000>;
-		interrupts	 = <45 2 0 0>;
-	};
-
-	sec_jr3: jr@4000 {
-		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
-		reg	   = <0x4000 0x1000>;
-		interrupts	 = <45 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/pq3-usb2-dr-0.dtsi b/src/powerpc/fsl/pq3-usb2-dr-0.dtsi
deleted file mode 100644
index 185ab9dc3ecd..000000000000
--- a/src/powerpc/fsl/pq3-usb2-dr-0.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-usb@22000 {
-	compatible = "fsl-usb2-dr";
-	reg = <0x22000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <28 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/pq3-usb2-dr-1.dtsi b/src/powerpc/fsl/pq3-usb2-dr-1.dtsi
deleted file mode 100644
index fe24cd612fff..000000000000
--- a/src/powerpc/fsl/pq3-usb2-dr-1.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-usb@23000 {
-	compatible = "fsl-usb2-dr";
-	reg = <0x23000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <46 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/qonverge-usb2-dr-0.dtsi b/src/powerpc/fsl/qonverge-usb2-dr-0.dtsi
deleted file mode 100644
index 29dad723091e..000000000000
--- a/src/powerpc/fsl/qonverge-usb2-dr-0.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * QorIQ Qonverge USB Host device tree stub [ controller @ offset 0x210000 ]
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-usb@210000 {
-	compatible = "fsl-usb2-dr";
-	reg = <0x210000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <44 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-dma-0.dtsi b/src/powerpc/fsl/qoriq-dma-0.dtsi
deleted file mode 100644
index 1aebf3ea4ca5..000000000000
--- a/src/powerpc/fsl/qoriq-dma-0.dtsi
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-dma0: dma@100300 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,eloplus-dma";
-	reg = <0x100300 0x4>;
-	ranges = <0x0 0x100100 0x200>;
-	cell-index = <0>;
-	dma-channel@0 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x0 0x80>;
-		cell-index = <0>;
-		interrupts = <28 2 0 0>;
-	};
-	dma-channel@80 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x80 0x80>;
-		cell-index = <1>;
-		interrupts = <29 2 0 0>;
-	};
-	dma-channel@100 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x100 0x80>;
-		cell-index = <2>;
-		interrupts = <30 2 0 0>;
-	};
-	dma-channel@180 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x180 0x80>;
-		cell-index = <3>;
-		interrupts = <31 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/qoriq-dma-1.dtsi b/src/powerpc/fsl/qoriq-dma-1.dtsi
deleted file mode 100644
index ecf5e180fe79..000000000000
--- a/src/powerpc/fsl/qoriq-dma-1.dtsi
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-dma1: dma@101300 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,eloplus-dma";
-	reg = <0x101300 0x4>;
-	ranges = <0x0 0x101100 0x200>;
-	cell-index = <1>;
-	dma-channel@0 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x0 0x80>;
-		cell-index = <0>;
-		interrupts = <32 2 0 0>;
-	};
-	dma-channel@80 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x80 0x80>;
-		cell-index = <1>;
-		interrupts = <33 2 0 0>;
-	};
-	dma-channel@100 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x100 0x80>;
-		cell-index = <2>;
-		interrupts = <34 2 0 0>;
-	};
-	dma-channel@180 {
-		compatible = "fsl,eloplus-dma-channel";
-		reg = <0x180 0x80>;
-		cell-index = <3>;
-		interrupts = <35 2 0 0>;
-	};
-};
diff --git a/src/powerpc/fsl/qoriq-duart-0.dtsi b/src/powerpc/fsl/qoriq-duart-0.dtsi
deleted file mode 100644
index 225c07b4e8ab..000000000000
--- a/src/powerpc/fsl/qoriq-duart-0.dtsi
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-serial0: serial@11c500 {
-	cell-index = <0>;
-	device_type = "serial";
-	compatible = "fsl,ns16550", "ns16550";
-	reg = <0x11c500 0x100>;
-	clock-frequency = <0>;
-	interrupts = <36 2 0 0>;
-};
-
-serial1: serial@11c600 {
-	cell-index = <1>;
-	device_type = "serial";
-	compatible = "fsl,ns16550", "ns16550";
-	reg = <0x11c600 0x100>;
-	clock-frequency = <0>;
-	interrupts = <36 2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-duart-1.dtsi b/src/powerpc/fsl/qoriq-duart-1.dtsi
deleted file mode 100644
index d23233a56b91..000000000000
--- a/src/powerpc/fsl/qoriq-duart-1.dtsi
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-serial2: serial@11d500 {
-	cell-index = <2>;
-	device_type = "serial";
-	compatible = "fsl,ns16550", "ns16550";
-	reg = <0x11d500 0x100>;
-	clock-frequency = <0>;
-	interrupts = <37 2 0 0>;
-};
-
-serial3: serial@11d600 {
-	cell-index = <3>;
-	device_type = "serial";
-	compatible = "fsl,ns16550", "ns16550";
-	reg = <0x11d600 0x100>;
-	clock-frequency = <0>;
-	interrupts = <37 2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-esdhc-0.dtsi b/src/powerpc/fsl/qoriq-esdhc-0.dtsi
deleted file mode 100644
index 20835ae216c7..000000000000
--- a/src/powerpc/fsl/qoriq-esdhc-0.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-sdhc: sdhc@114000 {
-	compatible = "fsl,esdhc";
-	reg = <0x114000 0x1000>;
-	interrupts = <48 2 0 0>;
-	clock-frequency = <0>;
-};
diff --git a/src/powerpc/fsl/qoriq-espi-0.dtsi b/src/powerpc/fsl/qoriq-espi-0.dtsi
deleted file mode 100644
index 6db06975e095..000000000000
--- a/src/powerpc/fsl/qoriq-espi-0.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-spi@110000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,mpc8536-espi";
-	reg = <0x110000 0x1000>;
-	interrupts = <53 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-gpio-0.dtsi b/src/powerpc/fsl/qoriq-gpio-0.dtsi
deleted file mode 100644
index cf714f5f68bc..000000000000
--- a/src/powerpc/fsl/qoriq-gpio-0.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-gpio0: gpio@130000 {
-	compatible = "fsl,qoriq-gpio";
-	reg = <0x130000 0x1000>;
-	interrupts = <55 2 0 0>;
-	#gpio-cells = <2>;
-	gpio-controller;
-};
diff --git a/src/powerpc/fsl/qoriq-gpio-1.dtsi b/src/powerpc/fsl/qoriq-gpio-1.dtsi
deleted file mode 100644
index c2f9cdadb604..000000000000
--- a/src/powerpc/fsl/qoriq-gpio-1.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * QorIQ GPIO device tree stub [ controller @ offset 0x131000 ]
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-gpio1: gpio@131000 {
-	compatible = "fsl,qoriq-gpio";
-	reg = <0x131000 0x1000>;
-	interrupts = <54 2 0 0>;
-	#gpio-cells = <2>;
-	gpio-controller;
-};
diff --git a/src/powerpc/fsl/qoriq-gpio-2.dtsi b/src/powerpc/fsl/qoriq-gpio-2.dtsi
deleted file mode 100644
index 33f3ccbac83f..000000000000
--- a/src/powerpc/fsl/qoriq-gpio-2.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * QorIQ GPIO device tree stub [ controller @ offset 0x132000 ]
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-gpio2: gpio@132000 {
-	compatible = "fsl,qoriq-gpio";
-	reg = <0x132000 0x1000>;
-	interrupts = <86 2 0 0>;
-	#gpio-cells = <2>;
-	gpio-controller;
-};
diff --git a/src/powerpc/fsl/qoriq-gpio-3.dtsi b/src/powerpc/fsl/qoriq-gpio-3.dtsi
deleted file mode 100644
index 86954e95ea02..000000000000
--- a/src/powerpc/fsl/qoriq-gpio-3.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * QorIQ GPIO device tree stub [ controller @ offset 0x133000 ]
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-gpio3: gpio@133000 {
-	compatible = "fsl,qoriq-gpio";
-	reg = <0x133000 0x1000>;
-	interrupts = <87 2 0 0>;
-	#gpio-cells = <2>;
-	gpio-controller;
-};
diff --git a/src/powerpc/fsl/qoriq-i2c-0.dtsi b/src/powerpc/fsl/qoriq-i2c-0.dtsi
deleted file mode 100644
index 5f9bf7debe4c..000000000000
--- a/src/powerpc/fsl/qoriq-i2c-0.dtsi
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * QorIQ I2C device tree stub [ controller @ offset 0x118000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-i2c@118000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	cell-index = <0>;
-	compatible = "fsl-i2c";
-	reg = <0x118000 0x100>;
-	interrupts = <38 2 0 0>;
-	dfsrr;
-};
-
-i2c@118100 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	cell-index = <1>;
-	compatible = "fsl-i2c";
-	reg = <0x118100 0x100>;
-	interrupts = <38 2 0 0>;
-	dfsrr;
-};
diff --git a/src/powerpc/fsl/qoriq-i2c-1.dtsi b/src/powerpc/fsl/qoriq-i2c-1.dtsi
deleted file mode 100644
index 7989bf5eeb53..000000000000
--- a/src/powerpc/fsl/qoriq-i2c-1.dtsi
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * QorIQ I2C device tree stub [ controller @ offset 0x119000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-i2c@119000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	cell-index = <2>;
-	compatible = "fsl-i2c";
-	reg = <0x119000 0x100>;
-	interrupts = <39 2 0 0>;
-	dfsrr;
-};
-
-i2c@119100 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	cell-index = <3>;
-	compatible = "fsl-i2c";
-	reg = <0x119100 0x100>;
-	interrupts = <39 2 0 0>;
-	dfsrr;
-};
diff --git a/src/powerpc/fsl/qoriq-mpic.dtsi b/src/powerpc/fsl/qoriq-mpic.dtsi
deleted file mode 100644
index 08f42271f86a..000000000000
--- a/src/powerpc/fsl/qoriq-mpic.dtsi
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-mpic: pic@40000 {
-	interrupt-controller;
-	#address-cells = <0>;
-	#interrupt-cells = <4>;
-	reg = <0x40000 0x40000>;
-	compatible = "fsl,mpic", "chrp,open-pic";
-	device_type = "open-pic";
-	clock-frequency = <0x0>;
-};
-
-timer@41100 {
-	compatible = "fsl,mpic-global-timer";
-	reg = <0x41100 0x100 0x41300 4>;
-	interrupts = <0 0 3 0
-		      1 0 3 0
-		      2 0 3 0
-		      3 0 3 0>;
-};
-
-msi0: msi@41600 {
-	compatible = "fsl,mpic-msi";
-	reg = <0x41600 0x200 0x44140 4>;
-	msi-available-ranges = <0 0x100>;
-	interrupts = <
-		0xe0 0 0 0
-		0xe1 0 0 0
-		0xe2 0 0 0
-		0xe3 0 0 0
-		0xe4 0 0 0
-		0xe5 0 0 0
-		0xe6 0 0 0
-		0xe7 0 0 0>;
-};
-
-msi1: msi@41800 {
-	compatible = "fsl,mpic-msi";
-	reg = <0x41800 0x200 0x45140 4>;
-	msi-available-ranges = <0 0x100>;
-	interrupts = <
-		0xe8 0 0 0
-		0xe9 0 0 0
-		0xea 0 0 0
-		0xeb 0 0 0
-		0xec 0 0 0
-		0xed 0 0 0
-		0xee 0 0 0
-		0xef 0 0 0>;
-};
-
-msi2: msi@41a00 {
-	compatible = "fsl,mpic-msi";
-	reg = <0x41a00 0x200 0x46140 4>;
-	msi-available-ranges = <0 0x100>;
-	interrupts = <
-		0xf0 0 0 0
-		0xf1 0 0 0
-		0xf2 0 0 0
-		0xf3 0 0 0
-		0xf4 0 0 0
-		0xf5 0 0 0
-		0xf6 0 0 0
-		0xf7 0 0 0>;
-};
-
-timer@42100 {
-	compatible = "fsl,mpic-global-timer";
-	reg = <0x42100 0x100 0x42300 4>;
-	interrupts = <4 0 3 0
-		      5 0 3 0
-		      6 0 3 0
-		      7 0 3 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-mpic4.3.dtsi b/src/powerpc/fsl/qoriq-mpic4.3.dtsi
deleted file mode 100644
index 64f713c24825..000000000000
--- a/src/powerpc/fsl/qoriq-mpic4.3.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-mpic: pic@40000 {
-	interrupt-controller;
-	#address-cells = <0>;
-	#interrupt-cells = <4>;
-	reg = <0x40000 0x40000>;
-	compatible = "fsl,mpic";
-	device_type = "open-pic";
-	clock-frequency = <0x0>;
-};
-
-timer@41100 {
-	compatible = "fsl,mpic-global-timer";
-	reg = <0x41100 0x100 0x41300 4>;
-	interrupts = <0 0 3 0
-		      1 0 3 0
-		      2 0 3 0
-		      3 0 3 0>;
-};
-
-msi0: msi@41600 {
-	compatible = "fsl,mpic-msi-v4.3";
-	reg = <0x41600 0x200 0x44148 4>;
-	interrupts = <
-		0xe0 0 0 0
-		0xe1 0 0 0
-		0xe2 0 0 0
-		0xe3 0 0 0
-		0xe4 0 0 0
-		0xe5 0 0 0
-		0xe6 0 0 0
-		0xe7 0 0 0
-		0x100 0 0 0
-		0x101 0 0 0
-		0x102 0 0 0
-		0x103 0 0 0
-		0x104 0 0 0
-		0x105 0 0 0
-		0x106 0 0 0
-		0x107 0 0 0>;
-};
-
-msi1: msi@41800 {
-	compatible = "fsl,mpic-msi-v4.3";
-	reg = <0x41800 0x200 0x45148 4>;
-	interrupts = <
-		0xe8 0 0 0
-		0xe9 0 0 0
-		0xea 0 0 0
-		0xeb 0 0 0
-		0xec 0 0 0
-		0xed 0 0 0
-		0xee 0 0 0
-		0xef 0 0 0
-		0x108 0 0 0
-		0x109 0 0 0
-		0x10a 0 0 0
-		0x10b 0 0 0
-		0x10c 0 0 0
-		0x10d 0 0 0
-		0x10e 0 0 0
-		0x10f 0 0 0>;
-};
-
-msi2: msi@41a00 {
-	compatible = "fsl,mpic-msi-v4.3";
-	reg = <0x41a00 0x200 0x46148 4>;
-	interrupts = <
-		0xf0 0 0 0
-		0xf1 0 0 0
-		0xf2 0 0 0
-		0xf3 0 0 0
-		0xf4 0 0 0
-		0xf5 0 0 0
-		0xf6 0 0 0
-		0xf7 0 0 0
-		0x110 0 0 0
-		0x111 0 0 0
-		0x112 0 0 0
-		0x113 0 0 0
-		0x114 0 0 0
-		0x115 0 0 0
-		0x116 0 0 0
-		0x117 0 0 0>;
-};
-
-msi3: msi@41c00 {
-	compatible = "fsl,mpic-msi-v4.3";
-	reg = <0x41c00 0x200 0x47148 4>;
-	interrupts = <
-		0xf8 0 0 0
-		0xf9 0 0 0
-		0xfa 0 0 0
-		0xfb 0 0 0
-		0xfc 0 0 0
-		0xfd 0 0 0
-		0xfe 0 0 0
-		0xff 0 0 0
-		0x118 0 0 0
-		0x119 0 0 0
-		0x11a 0 0 0
-		0x11b 0 0 0
-		0x11c 0 0 0
-		0x11d 0 0 0
-		0x11e 0 0 0
-		0x11f 0 0 0>;
-};
-
-timer@42100 {
-	compatible = "fsl,mpic-global-timer";
-	reg = <0x42100 0x100 0x42300 4>;
-	interrupts = <4 0 3 0
-		      5 0 3 0
-		      6 0 3 0
-		      7 0 3 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-raid1.0-0.dtsi b/src/powerpc/fsl/qoriq-raid1.0-0.dtsi
deleted file mode 100644
index 8d2e8aa6cf8a..000000000000
--- a/src/powerpc/fsl/qoriq-raid1.0-0.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ]
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-raideng: raideng@320000 {
-	compatible = "fsl,raideng-v1.0";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	reg = <0x320000 0x10000>;
-	ranges = <0 0x320000 0x10000>;
-
-	raideng_jq0@1000 {
-		compatible = "fsl,raideng-v1.0-job-queue";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x1000 0x1000>;
-		ranges = <0x0 0x1000 0x1000>;
-
-		raideng_jr0: jr@0 {
-			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
-			reg = <0x0 0x400>;
-			interrupts = <139 2 0 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		raideng_jr1: jr@400 {
-			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
-			reg = <0x400 0x400>;
-			interrupts = <140 2 0 0>;
-			interrupt-parent = <&mpic>;
-		};
-	};
-
-	raideng_jq1@2000 {
-		compatible = "fsl,raideng-v1.0-job-queue";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x2000 0x1000>;
-		ranges = <0x0 0x2000 0x1000>;
-
-		raideng_jr2: jr@0 {
-			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
-			reg = <0x0 0x400>;
-			interrupts = <141 2 0 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		raideng_jr3: jr@400 {
-			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
-			reg = <0x400 0x400>;
-			interrupts = <142 2 0 0>;
-			interrupt-parent = <&mpic>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/qoriq-rmu-0.dtsi b/src/powerpc/fsl/qoriq-rmu-0.dtsi
deleted file mode 100644
index ca7fec792e53..000000000000
--- a/src/powerpc/fsl/qoriq-rmu-0.dtsi
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-rmu: rmu@d3000 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,srio-rmu";
-	reg = <0xd3000 0x500>;
-	ranges = <0x0 0xd3000 0x500>;
-
-	message-unit@0 {
-		compatible = "fsl,srio-msg-unit";
-		reg = <0x0 0x100>;
-		interrupts = <
-			60 2 0 0  /* msg1_tx_irq */
-			61 2 0 0>;/* msg1_rx_irq */
-	};
-	message-unit@100 {
-		compatible = "fsl,srio-msg-unit";
-		reg = <0x100 0x100>;
-		interrupts = <
-			62 2 0 0  /* msg2_tx_irq */
-			63 2 0 0>;/* msg2_rx_irq */
-	};
-	doorbell-unit@400 {
-		compatible = "fsl,srio-dbell-unit";
-		reg = <0x400 0x80>;
-		interrupts = <
-			56 2 0 0  /* bell_outb_irq */
-			57 2 0 0>;/* bell_inb_irq */
-	};
-	port-write-unit@4e0 {
-		compatible = "fsl,srio-port-write-unit";
-		reg = <0x4e0 0x20>;
-		interrupts = <16 2 1 11>;
-	};
-};
diff --git a/src/powerpc/fsl/qoriq-sata2-0.dtsi b/src/powerpc/fsl/qoriq-sata2-0.dtsi
deleted file mode 100644
index b642047fdecf..000000000000
--- a/src/powerpc/fsl/qoriq-sata2-0.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-sata@220000 {
-	compatible = "fsl,pq-sata-v2";
-	reg = <0x220000 0x1000>;
-	interrupts = <68 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-sata2-1.dtsi b/src/powerpc/fsl/qoriq-sata2-1.dtsi
deleted file mode 100644
index c57370259750..000000000000
--- a/src/powerpc/fsl/qoriq-sata2-1.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-sata@221000 {
-	compatible = "fsl,pq-sata-v2";
-	reg = <0x221000 0x1000>;
-	interrupts = <69 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-sec4.0-0.dtsi b/src/powerpc/fsl/qoriq-sec4.0-0.dtsi
deleted file mode 100644
index 02bee5fcbb9a..000000000000
--- a/src/powerpc/fsl/qoriq-sec4.0-0.dtsi
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-crypto: crypto@300000 {
-	compatible = "fsl,sec-v4.0";
-	fsl,sec-era = <1>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	reg = <0x300000 0x10000>;
-	ranges = <0 0x300000 0x10000>;
-	interrupts = <92 2 0 0>;
-
-	sec_jr0: jr@1000 {
-		compatible = "fsl,sec-v4.0-job-ring";
-		reg = <0x1000 0x1000>;
-		interrupts = <88 2 0 0>;
-	};
-
-	sec_jr1: jr@2000 {
-		compatible = "fsl,sec-v4.0-job-ring";
-		reg = <0x2000 0x1000>;
-		interrupts = <89 2 0 0>;
-	};
-
-	sec_jr2: jr@3000 {
-		compatible = "fsl,sec-v4.0-job-ring";
-		reg = <0x3000 0x1000>;
-		interrupts = <90 2 0 0>;
-	};
-
-	sec_jr3: jr@4000 {
-		compatible = "fsl,sec-v4.0-job-ring";
-		reg = <0x4000 0x1000>;
-		interrupts = <91 2 0 0>;
-	};
-
-	rtic@6000 {
-		compatible = "fsl,sec-v4.0-rtic";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x6000 0x100>;
-		ranges = <0x0 0x6100 0xe00>;
-
-		rtic_a: rtic-a@0 {
-			compatible = "fsl,sec-v4.0-rtic-memory";
-			reg = <0x00 0x20 0x100 0x80>;
-		};
-
-		rtic_b: rtic-b@20 {
-			compatible = "fsl,sec-v4.0-rtic-memory";
-			reg = <0x20 0x20 0x200 0x80>;
-		};
-
-		rtic_c: rtic-c@40 {
-			compatible = "fsl,sec-v4.0-rtic-memory";
-			reg = <0x40 0x20 0x300 0x80>;
-		};
-
-		rtic_d: rtic-d@60 {
-			compatible = "fsl,sec-v4.0-rtic-memory";
-			reg = <0x60 0x20 0x500 0x80>;
-		};
-	};
-};
-
-sec_mon: sec_mon@314000 {
-	compatible = "fsl,sec-v4.0-mon";
-	reg = <0x314000 0x1000>;
-	interrupts = <93 2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-sec4.2-0.dtsi b/src/powerpc/fsl/qoriq-sec4.2-0.dtsi
deleted file mode 100644
index 7f7574e53323..000000000000
--- a/src/powerpc/fsl/qoriq-sec4.2-0.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-crypto: crypto@300000 {
-	compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
-	fsl,sec-era = <3>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	reg		 = <0x300000 0x10000>;
-	ranges		 = <0 0x300000 0x10000>;
-	interrupts	 = <92 2 0 0>;
-
-	sec_jr0: jr@1000 {
-		compatible = "fsl,sec-v4.2-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x1000 0x1000>;
-		interrupts = <88 2 0 0>;
-	};
-
-	sec_jr1: jr@2000 {
-		compatible = "fsl,sec-v4.2-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x2000 0x1000>;
-		interrupts = <89 2 0 0>;
-	};
-
-	sec_jr2: jr@3000 {
-		compatible = "fsl,sec-v4.2-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x3000 0x1000>;
-		interrupts = <90 2 0 0>;
-	};
-
-	sec_jr3: jr@4000 {
-		compatible = "fsl,sec-v4.2-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x4000 0x1000>;
-		interrupts = <91 2 0 0>;
-	};
-
-	rtic@6000 {
-		compatible = "fsl,sec-v4.2-rtic",
-			     "fsl,sec-v4.0-rtic";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x6000 0x100>;
-		ranges = <0x0 0x6100 0xe00>;
-
-		rtic_a: rtic-a@0 {
-			compatible = "fsl,sec-v4.2-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x00 0x20 0x100 0x80>;
-		};
-
-		rtic_b: rtic-b@20 {
-			compatible = "fsl,sec-v4.2-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x20 0x20 0x200 0x80>;
-		};
-
-		rtic_c: rtic-c@40 {
-			compatible = "fsl,sec-v4.2-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x40 0x20 0x300 0x80>;
-		};
-
-		rtic_d: rtic-d@60 {
-			compatible = "fsl,sec-v4.2-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x60 0x20 0x500 0x80>;
-		};
-	};
-};
-
-sec_mon: sec_mon@314000 {
-	compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
-	reg = <0x314000 0x1000>;
-	interrupts = <93 2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-sec5.0-0.dtsi b/src/powerpc/fsl/qoriq-sec5.0-0.dtsi
deleted file mode 100644
index e298efbb0f3e..000000000000
--- a/src/powerpc/fsl/qoriq-sec5.0-0.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * QorIQ Sec/Crypto 5.0 device tree stub [ controller @ offset 0x300000 ]
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-crypto: crypto@300000 {
-	compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
-	fsl,sec-era = <5>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	reg		 = <0x300000 0x10000>;
-	ranges		 = <0 0x300000 0x10000>;
-	interrupts	 = <92 2 0 0>;
-
-	sec_jr0: jr@1000 {
-		compatible = "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x1000 0x1000>;
-		interrupts = <88 2 0 0>;
-	};
-
-	sec_jr1: jr@2000 {
-		compatible = "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x2000 0x1000>;
-		interrupts = <89 2 0 0>;
-	};
-
-	sec_jr2: jr@3000 {
-		compatible = "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x3000 0x1000>;
-		interrupts = <90 2 0 0>;
-	};
-
-	sec_jr3: jr@4000 {
-		compatible = "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x4000 0x1000>;
-		interrupts = <91 2 0 0>;
-	};
-
-	rtic@6000 {
-		compatible = "fsl,sec-v5.0-rtic",
-			     "fsl,sec-v4.0-rtic";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x6000 0x100>;
-		ranges = <0x0 0x6100 0xe00>;
-
-		rtic_a: rtic-a@0 {
-			compatible = "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x00 0x20 0x100 0x80>;
-		};
-
-		rtic_b: rtic-b@20 {
-			compatible = "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x20 0x20 0x200 0x80>;
-		};
-
-		rtic_c: rtic-c@40 {
-			compatible = "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x40 0x20 0x300 0x80>;
-		};
-
-		rtic_d: rtic-d@60 {
-			compatible = "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x60 0x20 0x500 0x80>;
-		};
-	};
-};
-
-sec_mon: sec_mon@314000 {
-	compatible = "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
-	reg = <0x314000 0x1000>;
-	interrupts = <93 2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-sec5.2-0.dtsi b/src/powerpc/fsl/qoriq-sec5.2-0.dtsi
deleted file mode 100644
index 33ff09d52e05..000000000000
--- a/src/powerpc/fsl/qoriq-sec5.2-0.dtsi
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * QorIQ Sec/Crypto 5.2 device tree stub [ controller @ offset 0x300000 ]
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-crypto: crypto@300000 {
-	compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0";
-	fsl,sec-era = <5>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	reg		 = <0x300000 0x10000>;
-	ranges		 = <0 0x300000 0x10000>;
-	interrupts	 = <92 2 0 0>;
-
-	sec_jr0: jr@1000 {
-		compatible = "fsl,sec-v5.2-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x1000 0x1000>;
-		interrupts = <88 2 0 0>;
-	};
-
-	sec_jr1: jr@2000 {
-		compatible = "fsl,sec-v5.2-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x2000 0x1000>;
-		interrupts = <89 2 0 0>;
-	};
-
-	sec_jr2: jr@3000 {
-		compatible = "fsl,sec-v5.2-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x3000 0x1000>;
-		interrupts = <90 2 0 0>;
-	};
-
-	sec_jr3: jr@4000 {
-		compatible = "fsl,sec-v5.2-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x4000 0x1000>;
-		interrupts = <91 2 0 0>;
-	};
-
-	rtic@6000 {
-		compatible = "fsl,sec-v5.2-rtic",
-			     "fsl,sec-v5.0-rtic",
-			     "fsl,sec-v4.0-rtic";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x6000 0x100>;
-		ranges = <0x0 0x6100 0xe00>;
-
-		rtic_a: rtic-a@0 {
-			compatible = "fsl,sec-v5.2-rtic-memory",
-				     "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x00 0x20 0x100 0x80>;
-		};
-
-		rtic_b: rtic-b@20 {
-			compatible = "fsl,sec-v5.2-rtic-memory",
-				     "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x20 0x20 0x200 0x80>;
-		};
-
-		rtic_c: rtic-c@40 {
-			compatible = "fsl,sec-v5.2-rtic-memory",
-				     "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x40 0x20 0x300 0x80>;
-		};
-
-		rtic_d: rtic-d@60 {
-			compatible = "fsl,sec-v5.2-rtic-memory",
-				     "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x60 0x20 0x500 0x80>;
-		};
-	};
-};
-
-sec_mon: sec_mon@314000 {
-	compatible = "fsl,sec-v5.2-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
-	reg = <0x314000 0x1000>;
-	interrupts = <93 2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-sec5.3-0.dtsi b/src/powerpc/fsl/qoriq-sec5.3-0.dtsi
deleted file mode 100644
index 08778221c194..000000000000
--- a/src/powerpc/fsl/qoriq-sec5.3-0.dtsi
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * QorIQ Sec/Crypto 5.3 device tree stub [ controller @ offset 0x300000 ]
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-crypto: crypto@300000 {
-	compatible = "fsl,sec-v5.3", "fsl,sec-v5.0", "fsl,sec-v4.0";
-	fsl,sec-era = <4>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	reg		 = <0x300000 0x10000>;
-	ranges		 = <0 0x300000 0x10000>;
-	interrupts	 = <92 2 0 0>;
-
-	sec_jr0: jr@1000 {
-		compatible = "fsl,sec-v5.3-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x1000 0x1000>;
-		interrupts = <88 2 0 0>;
-	};
-
-	sec_jr1: jr@2000 {
-		compatible = "fsl,sec-v5.3-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x2000 0x1000>;
-		interrupts = <89 2 0 0>;
-	};
-
-	sec_jr2: jr@3000 {
-		compatible = "fsl,sec-v5.3-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x3000 0x1000>;
-		interrupts = <90 2 0 0>;
-	};
-
-	sec_jr3: jr@4000 {
-		compatible = "fsl,sec-v5.3-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg = <0x4000 0x1000>;
-		interrupts = <91 2 0 0>;
-	};
-
-	rtic@6000 {
-		compatible = "fsl,sec-v5.3-rtic",
-			     "fsl,sec-v5.0-rtic",
-			     "fsl,sec-v4.0-rtic";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x6000 0x100>;
-		ranges = <0x0 0x6100 0xe00>;
-
-		rtic_a: rtic-a@0 {
-			compatible = "fsl,sec-v5.3-rtic-memory",
-				     "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x00 0x20 0x100 0x80>;
-		};
-
-		rtic_b: rtic-b@20 {
-			compatible = "fsl,sec-v5.3-rtic-memory",
-				     "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x20 0x20 0x200 0x80>;
-		};
-
-		rtic_c: rtic-c@40 {
-			compatible = "fsl,sec-v5.3-rtic-memory",
-				     "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x40 0x20 0x300 0x80>;
-		};
-
-		rtic_d: rtic-d@60 {
-			compatible = "fsl,sec-v5.3-rtic-memory",
-				     "fsl,sec-v5.0-rtic-memory",
-				     "fsl,sec-v4.0-rtic-memory";
-			reg = <0x60 0x20 0x500 0x80>;
-		};
-	};
-};
-
-sec_mon: sec_mon@314000 {
-	compatible = "fsl,sec-v5.3-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
-	reg = <0x314000 0x1000>;
-	interrupts = <93 2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-sec6.0-0.dtsi b/src/powerpc/fsl/qoriq-sec6.0-0.dtsi
deleted file mode 100644
index 7d4a6a2354f4..000000000000
--- a/src/powerpc/fsl/qoriq-sec6.0-0.dtsi
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * QorIQ Sec/Crypto 6.0 device tree stub
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-	compatible = "fsl,sec-v6.0", "fsl,sec-v5.0",
-		     "fsl,sec-v4.0";
-	fsl,sec-era = <6>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	jr@1000 {
-		compatible = "fsl,sec-v6.0-job-ring",
-			     "fsl,sec-v5.2-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.4-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg	   = <0x1000 0x1000>;
-	};
-
-	jr@2000 {
-		compatible = "fsl,sec-v6.0-job-ring",
-			     "fsl,sec-v5.2-job-ring",
-			     "fsl,sec-v5.0-job-ring",
-			     "fsl,sec-v4.4-job-ring",
-			     "fsl,sec-v4.0-job-ring";
-		reg	   = <0x2000 0x1000>;
-	};
diff --git a/src/powerpc/fsl/qoriq-usb2-dr-0.dtsi b/src/powerpc/fsl/qoriq-usb2-dr-0.dtsi
deleted file mode 100644
index 4dd6f84c239c..000000000000
--- a/src/powerpc/fsl/qoriq-usb2-dr-0.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-usb@211000 {
-	compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
-	reg = <0x211000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <45 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/qoriq-usb2-mph-0.dtsi b/src/powerpc/fsl/qoriq-usb2-mph-0.dtsi
deleted file mode 100644
index f053835aa1c7..000000000000
--- a/src/powerpc/fsl/qoriq-usb2-mph-0.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ]
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-usb@210000 {
-	compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
-	reg = <0x210000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <44 0x2 0 0>;
-};
diff --git a/src/powerpc/fsl/t1040si-post.dtsi b/src/powerpc/fsl/t1040si-post.dtsi
deleted file mode 100644
index 12e597eea3c8..000000000000
--- a/src/powerpc/fsl/t1040si-post.dtsi
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * T1040 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <25 2 0 0>;
-};
-
-&pci0 {
-	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	interrupts = <20 2 0 0>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <20 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 40 1 0 0
-			0000 0 0 2 &mpic 1 1 0 0
-			0000 0 0 3 &mpic 2 1 0 0
-			0000 0 0 4 &mpic 3 1 0 0
-			>;
-	};
-};
-
-&pci1 {
-	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 0xff>;
-	interrupts = <21 2 0 0>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <21 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 41 1 0 0
-			0000 0 0 2 &mpic 5 1 0 0
-			0000 0 0 3 &mpic 6 1 0 0
-			0000 0 0 4 &mpic 7 1 0 0
-			>;
-	};
-};
-
-&pci2 {
-	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	interrupts = <22 2 0 0>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <22 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 42 1 0 0
-			0000 0 0 2 &mpic 9 1 0 0
-			0000 0 0 3 &mpic 10 1 0 0
-			0000 0 0 4 &mpic 11 1 0 0
-			>;
-	};
-};
-
-&pci3 {
-	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	interrupts = <23 2 0 0>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <23 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 43 1 0 0
-			0000 0 0 2 &mpic 0 1 0 0
-			0000 0 0 3 &mpic 4 1 0 0
-			0000 0 0 4 &mpic 8 1 0 0
-			>;
-	};
-};
-
-&dcsr {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,dcsr", "simple-bus";
-
-	dcsr-epu@0 {
-		compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
-		interrupts = <52 2 0 0
-			      84 2 0 0
-			      85 2 0 0>;
-		reg = <0x0 0x1000>;
-	};
-	dcsr-npc {
-		compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
-		reg = <0x1000 0x1000 0x1002000 0x10000>;
-	};
-	dcsr-nxc@2000 {
-		compatible = "fsl,dcsr-nxc";
-		reg = <0x2000 0x1000>;
-	};
-	dcsr-corenet {
-		compatible = "fsl,dcsr-corenet";
-		reg = <0x8000 0x1000 0x1A000 0x1000>;
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
-		reg = <0x9000 0x1000>;
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
-		reg = <0x11000 0x1000>;
-	};
-	dcsr-ddr@12000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr1>;
-		reg = <0x12000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
-		reg = <0x18000 0x1000>;
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
-		reg = <0x22000 0x1000>;
-	};
-	dcsr-snpc@30000 {
-		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
-		reg = <0x30000 0x1000 0x1022000 0x10000>;
-	};
-	dcsr-snpc@31000 {
-		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
-		reg = <0x31000 0x1000 0x1042000 0x10000>;
-	};
-	dcsr-cpu-sb-proxy@100000 {
-		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu0>;
-		reg = <0x100000 0x1000 0x101000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@108000 {
-		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x108000 0x1000 0x109000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@110000 {
-		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu2>;
-		reg = <0x110000 0x1000 0x111000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@118000 {
-		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu3>;
-		reg = <0x118000 0x1000 0x119000 0x1000>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <16>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v5.0",
-				"fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,t1040-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000>;
-		interrupts = <16 2 1 27>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x1000>;
-		ranges = <0 0x20000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-		pamu0: pamu@0 {
-			reg = <0 0x1000>;
-			fsl,primary-cache-geometry = <128 1>;
-			fsl,secondary-cache-geometry = <16 2>;
-		};
-	};
-
-/include/ "qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		fsl,liodn-bits = <12>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		reg = <0xe1000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-2.0";
-			clock-output-names = "sysclk", "fixed-clock";
-		};
-
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll1-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1@20 {
-			#clock-cells = <0>;
-			reg = <0x20 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll1-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux1";
-		};
-
-		mux2: mux2@40 {
-			#clock-cells = <0>;
-			reg = <0x40 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll1-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux2";
-		};
-
-		mux3: mux3@60 {
-			#clock-cells = <0>;
-			reg = <0x60 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0_0", "pll0_1", "pll0_2",
-				"pll1_0", "pll1_1", "pll1_2";
-			clock-output-names = "cmux3";
-		};
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0";
-		reg = <0xe2000 0x1000>;
-	};
-
-	sfp: sfp@e8000 {
-		compatible = "fsl,t1040-sfp";
-		reg	   = <0xe8000 0x1000>;
-	};
-
-	serdes: serdes@ea000 {
-		compatible = "fsl,t1040-serdes";
-		reg	   = <0xea000 0x4000>;
-	};
-
-/include/ "elo3-dma-0.dtsi"
-/include/ "elo3-dma-1.dtsi"
-/include/ "qoriq-espi-0.dtsi"
-	spi@110000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "qoriq-esdhc-0.dtsi"
-	sdhc@114000 {
-		compatible = "fsl,t1040-esdhc", "fsl,esdhc";
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
-		sdhci,auto-cmd12;
-	};
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-gpio-1.dtsi"
-/include/ "qoriq-gpio-2.dtsi"
-/include/ "qoriq-gpio-3.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
-		usb0: usb@210000 {
-			compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
-			fsl,iommu-parent = <&pamu0>;
-			fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
-			phy_type = "utmi";
-			port0;
-		};
-/include/ "qoriq-usb2-dr-0.dtsi"
-		usb1: usb@211000 {
-			compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
-			fsl,iommu-parent = <&pamu0>;
-			fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
-			dr_mode = "host";
-			phy_type = "utmi";
-		};
-
-	display@180000 {
-		compatible = "fsl,t1040-diu", "fsl,diu";
-		reg = <0x180000 1000>;
-		interrupts = <74 2 0 0>;
-	};
-
-/include/ "qoriq-sata2-0.dtsi"
-	sata@220000 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
-	};
-/include/ "qoriq-sata2-1.dtsi"
-	sata@221000 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
-	};
-/include/ "qoriq-sec5.0-0.dtsi"
-};
diff --git a/src/powerpc/fsl/t1042si-post.dtsi b/src/powerpc/fsl/t1042si-post.dtsi
deleted file mode 100644
index 319b74f29724..000000000000
--- a/src/powerpc/fsl/t1042si-post.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * T1042 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "t1040si-post.dtsi"
-
-/* Place holder for ethernet related device tree nodes */
diff --git a/src/powerpc/fsl/t104xsi-pre.dtsi b/src/powerpc/fsl/t104xsi-pre.dtsi
deleted file mode 100644
index bbb7025ca9c2..000000000000
--- a/src/powerpc/fsl/t104xsi-pre.dtsi
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e5500_power_isa.dtsi"
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		sdhc = &sdhc;
-
-		crypto = &crypto;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e5500@0 {
-			device_type = "cpu";
-			reg = <0>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu1: PowerPC,e5500@1 {
-			device_type = "cpu";
-			reg = <1>;
-			clocks = <&mux1>;
-			next-level-cache = <&L2_2>;
-			L2_2: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu2: PowerPC,e5500@2 {
-			device_type = "cpu";
-			reg = <2>;
-			clocks = <&mux2>;
-			next-level-cache = <&L2_3>;
-			L2_3: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-		cpu3: PowerPC,e5500@3 {
-			device_type = "cpu";
-			reg = <3>;
-			clocks = <&mux3>;
-			next-level-cache = <&L2_4>;
-			L2_4: l2-cache {
-				next-level-cache = <&cpc>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/fsl/t2080si-post.dtsi b/src/powerpc/fsl/t2080si-post.dtsi
deleted file mode 100644
index 082ec2044060..000000000000
--- a/src/powerpc/fsl/t2080si-post.dtsi
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * T2080 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "t2081si-post.dtsi"
-
-&soc {
-/include/ "qoriq-sata2-0.dtsi"
-	sata@220000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
-	};
-
-/include/ "qoriq-sata2-1.dtsi"
-	sata@221000 {
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
-	};
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <16 2 1 11>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-	};
-
-	port2 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <2>;
-	};
-};
diff --git a/src/powerpc/fsl/t2081si-post.dtsi b/src/powerpc/fsl/t2081si-post.dtsi
deleted file mode 100644
index 97479f0ce630..000000000000
--- a/src/powerpc/fsl/t2081si-post.dtsi
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- * T2081 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <25 2 0 0>;
-};
-
-/* controller at 0x240000 */
-&pci0 {
-	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	interrupts = <20 2 0 0>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <20 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 40 1 0 0
-			0000 0 0 2 &mpic 1 1 0 0
-			0000 0 0 3 &mpic 2 1 0 0
-			0000 0 0 4 &mpic 3 1 0 0
-		>;
-	};
-};
-
-/* controller at 0x250000 */
-&pci1 {
-	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 0xff>;
-	interrupts = <21 2 0 0>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <21 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 41 1 0 0
-			0000 0 0 2 &mpic 5 1 0 0
-			0000 0 0 3 &mpic 6 1 0 0
-			0000 0 0 4 &mpic 7 1 0 0
-		>;
-	};
-};
-
-/* controller at 0x260000 */
-&pci2 {
-	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	interrupts = <22 2 0 0>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <22 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 42 1 0 0
-			0000 0 0 2 &mpic 9 1 0 0
-			0000 0 0 3 &mpic 10 1 0 0
-			0000 0 0 4 &mpic 11 1 0 0
-		>;
-	};
-};
-
-/* controller at 0x270000 */
-&pci3 {
-	compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	interrupts = <23 2 0 0>;
-	fsl,iommu-parent = <&pamu0>;
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		interrupts = <23 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 43 1 0 0
-			0000 0 0 2 &mpic 0 1 0 0
-			0000 0 0 3 &mpic 4 1 0 0
-			0000 0 0 4 &mpic 8 1 0 0
-		>;
-	};
-};
-
-&dcsr {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,dcsr", "simple-bus";
-
-	dcsr-epu@0 {
-		compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu";
-		interrupts = <52 2 0 0
-			      84 2 0 0
-			      85 2 0 0
-			      94 2 0 0
-			      95 2 0 0>;
-		reg = <0x0 0x1000>;
-	};
-	dcsr-npc {
-		compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc";
-		reg = <0x1000 0x1000 0x1002000 0x10000>;
-	};
-	dcsr-nxc@2000 {
-		compatible = "fsl,dcsr-nxc";
-		reg = <0x2000 0x1000>;
-	};
-	dcsr-corenet {
-		compatible = "fsl,dcsr-corenet";
-		reg = <0x8000 0x1000 0x1A000 0x1000>;
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn";
-		reg = <0x11000 0x1000>;
-	};
-	dcsr-ddr@12000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr1>;
-		reg = <0x12000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal";
-		reg = <0x18000 0x1000>;
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm";
-		reg = <0x22000 0x1000>;
-	};
-	dcsr-snpc@30000 {
-		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
-		reg = <0x30000 0x1000 0x1022000 0x10000>;
-	};
-	dcsr-snpc@31000 {
-		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
-		reg = <0x31000 0x1000 0x1042000 0x10000>;
-	};
-	dcsr-snpc@32000 {
-		compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc";
-		reg = <0x32000 0x1000 0x1062000 0x10000>;
-	};
-	dcsr-cpu-sb-proxy@100000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu0>;
-		reg = <0x100000 0x1000 0x101000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@108000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x108000 0x1000 0x109000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@110000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu2>;
-		reg = <0x110000 0x1000 0x111000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@118000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu3>;
-		reg = <0x118000 0x1000 0x119000 0x1000>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,t2080-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000
-		       0x11000 0x1000
-		       0x12000 0x1000>;
-		interrupts = <16 2 1 27
-			      16 2 1 26
-			      16 2 1 25>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x3000>;
-		fsl,portid-mapping = <0x8000>;
-		ranges = <0 0x20000 0x3000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-
-		pamu0: pamu@0 {
-			reg = <0 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu1: pamu@1000 {
-			reg = <0x1000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-
-		pamu2: pamu@2000 {
-			reg = <0x2000 0x1000>;
-			fsl,primary-cache-geometry = <32 1>;
-			fsl,secondary-cache-geometry = <128 2>;
-		};
-	};
-
-/include/ "qoriq-mpic4.3.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		fsl,liodn-bits = <12>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		reg = <0xe1000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-2.0";
-			clock-output-names = "sysclk", "fixed-clock";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll1-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1@20 {
-			#clock-cells = <0>;
-			reg = <0x20 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll1-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux1";
-		};
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0";
-		reg = <0xe2000 0x1000>;
-	};
-
-	sfp: sfp@e8000 {
-		compatible = "fsl,t2080-sfp";
-		reg = <0xe8000 0x1000>;
-	};
-
-	serdes: serdes@ea000 {
-		compatible = "fsl,t2080-serdes";
-		reg = <0xea000 0x4000>;
-	};
-
-/include/ "elo3-dma-0.dtsi"
-	dma@100300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */
-	};
-/include/ "elo3-dma-1.dtsi"
-	dma@101300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */
-	};
-/include/ "elo3-dma-2.dtsi"
-	dma@102300 {
-		fsl,iommu-parent = <&pamu0>;
-		fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */
-	};
-
-/include/ "qoriq-espi-0.dtsi"
-	spi@110000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "qoriq-esdhc-0.dtsi"
-	sdhc@114000 {
-		compatible = "fsl,t2080-esdhc", "fsl,esdhc";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */
-		sdhci,auto-cmd12;
-	};
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-gpio-1.dtsi"
-/include/ "qoriq-gpio-2.dtsi"
-/include/ "qoriq-gpio-3.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
-	usb0: usb@210000 {
-		compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
-		phy_type = "utmi";
-		port0;
-	};
-/include/ "qoriq-usb2-dr-0.dtsi"
-	usb1: usb@211000 {
-		compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
-		fsl,iommu-parent = <&pamu1>;
-		fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */
-		dr_mode = "host";
-		phy_type = "utmi";
-	};
-/include/ "qoriq-sec5.2-0.dtsi"
-
-	L2_1: l2-cache-controller@c20000 {
-		/* Cluster 0 L2 cache */
-		compatible = "fsl,t2080-l2-cache-controller";
-		reg = <0xc20000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-};
diff --git a/src/powerpc/fsl/t208xsi-pre.dtsi b/src/powerpc/fsl/t208xsi-pre.dtsi
deleted file mode 100644
index e71ceb0e1100..000000000000
--- a/src/powerpc/fsl/t208xsi-pre.dtsi
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * T2080/T2081 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e6500_power_isa.dtsi"
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-
-		crypto = &crypto;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		dma2 = &dma2;
-		sdhc = &sdhc;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e6500@0 {
-			device_type = "cpu";
-			reg = <0 1>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu1: PowerPC,e6500@2 {
-			device_type = "cpu";
-			reg = <2 3>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu2: PowerPC,e6500@4 {
-			device_type = "cpu";
-			reg = <4 5>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu3: PowerPC,e6500@6 {
-			device_type = "cpu";
-			reg = <6 7>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-	};
-};
diff --git a/src/powerpc/fsl/t4240si-post.dtsi b/src/powerpc/fsl/t4240si-post.dtsi
deleted file mode 100644
index a3d582e0361a..000000000000
--- a/src/powerpc/fsl/t4240si-post.dtsi
+++ /dev/null
@@ -1,530 +0,0 @@
-/*
- * T4240 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <25 2 0 0>;
-};
-
-/* controller at 0x240000 */
-&pci0 {
-	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	interrupts = <20 2 0 0>;
-	pcie@0 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		reg = <0 0 0 0 0>;
-		interrupts = <20 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 40 1 0 0
-			0000 0 0 2 &mpic 1 1 0 0
-			0000 0 0 3 &mpic 2 1 0 0
-			0000 0 0 4 &mpic 3 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x250000 */
-&pci1 {
-	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0 0xff>;
-	interrupts = <21 2 0 0>;
-	pcie@0 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		reg = <0 0 0 0 0>;
-		interrupts = <21 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 41 1 0 0
-			0000 0 0 2 &mpic 5 1 0 0
-			0000 0 0 3 &mpic 6 1 0 0
-			0000 0 0 4 &mpic 7 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x260000 */
-&pci2 {
-	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	interrupts = <22 2 0 0>;
-	pcie@0 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		reg = <0 0 0 0 0>;
-		interrupts = <22 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 42 1 0 0
-			0000 0 0 2 &mpic 9 1 0 0
-			0000 0 0 3 &mpic 10 1 0 0
-			0000 0 0 4 &mpic 11 1 0 0
-			>;
-	};
-};
-
-/* controller at 0x270000 */
-&pci3 {
-	compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0";
-	device_type = "pci";
-	#size-cells = <2>;
-	#address-cells = <3>;
-	bus-range = <0x0 0xff>;
-	interrupts = <23 2 0 0>;
-	pcie@0 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		reg = <0 0 0 0 0>;
-		interrupts = <23 2 0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 43 1 0 0
-			0000 0 0 2 &mpic 0 1 0 0
-			0000 0 0 3 &mpic 4 1 0 0
-			0000 0 0 4 &mpic 8 1 0 0
-			>;
-	};
-};
-
-&rio {
-	compatible = "fsl,srio";
-	interrupts = <16 2 1 11>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-
-	port1 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <1>;
-	};
-
-	port2 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		cell-index = <2>;
-	};
-};
-
-&dcsr {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,dcsr", "simple-bus";
-
-	dcsr-epu@0 {
-		compatible = "fsl,t4240-dcsr-epu", "fsl,dcsr-epu";
-		interrupts = <52 2 0 0
-			      84 2 0 0
-			      85 2 0 0
-			      94 2 0 0
-			      95 2 0 0>;
-		reg = <0x0 0x1000>;
-	};
-	dcsr-npc {
-		compatible = "fsl,t4240-dcsr-cnpc", "fsl,dcsr-cnpc";
-		reg = <0x1000 0x1000 0x1002000 0x10000>;
-	};
-	dcsr-nxc@2000 {
-		compatible = "fsl,dcsr-nxc";
-		reg = <0x2000 0x1000>;
-	};
-	dcsr-corenet {
-		compatible = "fsl,dcsr-corenet";
-		reg = <0x8000 0x1000 0x1A000 0x1000>;
-	};
-	dcsr-dpaa@9000 {
-		compatible = "fsl,t4240-dcsr-dpaa", "fsl,dcsr-dpaa";
-		reg = <0x9000 0x1000>;
-	};
-	dcsr-ocn@11000 {
-		compatible = "fsl,t4240-dcsr-ocn", "fsl,dcsr-ocn";
-		reg = <0x11000 0x1000>;
-	};
-	dcsr-ddr@12000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr1>;
-		reg = <0x12000 0x1000>;
-	};
-	dcsr-ddr@13000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr2>;
-		reg = <0x13000 0x1000>;
-	};
-	dcsr-ddr@14000 {
-		compatible = "fsl,dcsr-ddr";
-		dev-handle = <&ddr3>;
-		reg = <0x14000 0x1000>;
-	};
-	dcsr-nal@18000 {
-		compatible = "fsl,t4240-dcsr-nal", "fsl,dcsr-nal";
-		reg = <0x18000 0x1000>;
-	};
-	dcsr-rcpm@22000 {
-		compatible = "fsl,t4240-dcsr-rcpm", "fsl,dcsr-rcpm";
-		reg = <0x22000 0x1000>;
-	};
-	dcsr-snpc@30000 {
-		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
-		reg = <0x30000 0x1000 0x1022000 0x10000>;
-	};
-	dcsr-snpc@31000 {
-		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
-		reg = <0x31000 0x1000 0x1042000 0x10000>;
-	};
-	dcsr-snpc@32000 {
-		compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc";
-		reg = <0x32000 0x1000 0x1062000 0x10000>;
-	};
-	dcsr-cpu-sb-proxy@100000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu0>;
-		reg = <0x100000 0x1000 0x101000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@108000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu1>;
-		reg = <0x108000 0x1000 0x109000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@110000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu2>;
-		reg = <0x110000 0x1000 0x111000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@118000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu3>;
-		reg = <0x118000 0x1000 0x119000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@120000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu4>;
-		reg = <0x120000 0x1000 0x121000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@128000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu5>;
-		reg = <0x128000 0x1000 0x129000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@130000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu6>;
-		reg = <0x130000 0x1000 0x131000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@138000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu7>;
-		reg = <0x138000 0x1000 0x139000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@140000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu8>;
-		reg = <0x140000 0x1000 0x141000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@148000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu9>;
-		reg = <0x148000 0x1000 0x149000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@150000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu10>;
-		reg = <0x150000 0x1000 0x151000 0x1000>;
-	};
-	dcsr-cpu-sb-proxy@158000 {
-		compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
-		cpu-handle = <&cpu11>;
-		reg = <0x158000 0x1000 0x159000 0x1000>;
-	};
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	ddr2: memory-controller@9000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x9000 0x1000>;
-		interrupts = <16 2 1 22>;
-	};
-
-	ddr3: memory-controller@a000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0xa000 0x1000>;
-		interrupts = <16 2 1 21>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,t4240-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000
-		       0x11000 0x1000
-		       0x12000 0x1000>;
-		interrupts = <16 2 1 27
-			      16 2 1 26
-			      16 2 1 25>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x6000>;
-		fsl,portid-mapping = <0x8000>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-	};
-
-/include/ "qoriq-mpic4.3.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		fsl,liodn-bits = <12>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
-		ranges = <0x0 0xe1000 0x1000>;
-		reg = <0xe1000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sysclk: sysclk {
-			#clock-cells = <0>;
-			compatible = "fsl,qoriq-sysclk-2.0";
-			clock-output-names = "sysclk";
-		};
-
-		pll0: pll0@800 {
-			#clock-cells = <1>;
-			reg = <0x800 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
-		};
-
-		pll1: pll1@820 {
-			#clock-cells = <1>;
-			reg = <0x820 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
-		};
-
-		pll2: pll2@840 {
-			#clock-cells = <1>;
-			reg = <0x840 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll2", "pll2-div2", "pll2-div4";
-		};
-
-		pll3: pll3@860 {
-			#clock-cells = <1>;
-			reg = <0x860 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll3", "pll3-div2", "pll3-div4";
-		};
-
-		pll4: pll4@880 {
-			#clock-cells = <1>;
-			reg = <0x880 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll4", "pll4-div2", "pll4-div4";
-		};
-
-		mux0: mux0@0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				<&pll1 0>, <&pll1 1>, <&pll1 2>,
-				<&pll2 0>, <&pll2 1>, <&pll2 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4",
-				"pll2", "pll2-div2", "pll2-div4";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1@20 {
-			#clock-cells = <0>;
-			reg = <0x20 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				<&pll1 0>, <&pll1 1>, <&pll1 2>,
-				<&pll2 0>, <&pll2 1>, <&pll2 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4",
-				"pll2", "pll2-div2", "pll2-div4";
-			clock-output-names = "cmux1";
-		};
-
-		mux2: mux2@40 {
-			#clock-cells = <0>;
-			reg = <0x40 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>,
-				<&pll4 0>, <&pll4 1>, <&pll4 2>;
-			clock-names = "pll3", "pll3-div2", "pll3-div4",
-				"pll4", "pll4-div2", "pll4-div4";
-			clock-output-names = "cmux2";
-		};
-	};
-
-	rcpm: global-utilities@e2000 {
-		compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0";
-		reg = <0xe2000 0x1000>;
-	};
-
-	sfp: sfp@e8000 {
-		compatible = "fsl,t4240-sfp";
-		reg	   = <0xe8000 0x1000>;
-	};
-
-	serdes: serdes@ea000 {
-		compatible = "fsl,t4240-serdes";
-		reg	   = <0xea000 0x4000>;
-	};
-
-/include/ "elo3-dma-0.dtsi"
-/include/ "elo3-dma-1.dtsi"
-/include/ "elo3-dma-2.dtsi"
-
-/include/ "qoriq-espi-0.dtsi"
-	spi@110000 {
-		fsl,espi-num-chipselects = <4>;
-	};
-
-/include/ "qoriq-esdhc-0.dtsi"
-	sdhc@114000 {
-		compatible = "fsl,t4240-esdhc", "fsl,esdhc";
-		sdhci,auto-cmd12;
-	};
-/include/ "qoriq-i2c-0.dtsi"
-/include/ "qoriq-i2c-1.dtsi"
-/include/ "qoriq-duart-0.dtsi"
-/include/ "qoriq-duart-1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-gpio-1.dtsi"
-/include/ "qoriq-gpio-2.dtsi"
-/include/ "qoriq-gpio-3.dtsi"
-/include/ "qoriq-usb2-mph-0.dtsi"
-		usb0: usb@210000 {
-			compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
-			phy_type = "utmi";
-			port0;
-		};
-/include/ "qoriq-usb2-dr-0.dtsi"
-		usb1: usb@211000 {
-			compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
-			dr_mode = "host";
-			phy_type = "utmi";
-		};
-/include/ "qoriq-sata2-0.dtsi"
-/include/ "qoriq-sata2-1.dtsi"
-/include/ "qoriq-sec5.0-0.dtsi"
-
-	L2_1: l2-cache-controller@c20000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xc20000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-	L2_2: l2-cache-controller@c60000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xc60000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-	L2_3: l2-cache-controller@ca0000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xca0000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-};
diff --git a/src/powerpc/fsl/t4240si-pre.dtsi b/src/powerpc/fsl/t4240si-pre.dtsi
deleted file mode 100644
index 261a3abb1a55..000000000000
--- a/src/powerpc/fsl/t4240si-pre.dtsi
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * T4240 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "e6500_power_isa.dtsi"
-
-/ {
-	compatible = "fsl,T4240";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-		dcsr = &dcsr;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		crypto = &crypto;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-		pci3 = &pci3;
-		dma0 = &dma0;
-		dma1 = &dma1;
-		dma2 = &dma2;
-		sdhc = &sdhc;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e6500@0 {
-			device_type = "cpu";
-			reg = <0 1>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu1: PowerPC,e6500@2 {
-			device_type = "cpu";
-			reg = <2 3>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu2: PowerPC,e6500@4 {
-			device_type = "cpu";
-			reg = <4 5>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu3: PowerPC,e6500@6 {
-			device_type = "cpu";
-			reg = <6 7>;
-			clocks = <&mux0>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu4: PowerPC,e6500@8 {
-			device_type = "cpu";
-			reg = <8 9>;
-			clocks = <&mux1>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu5: PowerPC,e6500@10 {
-			device_type = "cpu";
-			reg = <10 11>;
-			clocks = <&mux1>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu6: PowerPC,e6500@12 {
-			device_type = "cpu";
-			reg = <12 13>;
-			clocks = <&mux1>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu7: PowerPC,e6500@14 {
-			device_type = "cpu";
-			reg = <14 15>;
-			clocks = <&mux1>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu8: PowerPC,e6500@16 {
-			device_type = "cpu";
-			reg = <16 17>;
-			clocks = <&mux2>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu9: PowerPC,e6500@18 {
-			device_type = "cpu";
-			reg = <18 19>;
-			clocks = <&mux2>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu10: PowerPC,e6500@20 {
-			device_type = "cpu";
-			reg = <20 21>;
-			clocks = <&mux2>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu11: PowerPC,e6500@22 {
-			device_type = "cpu";
-			reg = <22 23>;
-			clocks = <&mux2>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-	};
-};
diff --git a/src/powerpc/gamecube.dts b/src/powerpc/gamecube.dts
deleted file mode 100644
index ef3be0e58b02..000000000000
--- a/src/powerpc/gamecube.dts
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * arch/powerpc/boot/dts/gamecube.dts
- *
- * Nintendo GameCube platform device tree source
- * Copyright (C) 2007-2009 The GameCube Linux Team
- * Copyright (C) 2007,2008,2009 Albert Herranz
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- */
-
-/dts-v1/;
-
-/ {
-	model = "nintendo,gamecube";
-	compatible = "nintendo,gamecube";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen {
-		bootargs = "root=/dev/gcnsda2 rootwait udbg-immortal";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x01800000>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,gekko@0 {
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <486000000>; /* 486MHz */
-			bus-frequency = <162000000>; /* 162MHz core-to-bus 3x */
-			timebase-frequency = <40500000>; /* 162MHz / 4 */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-		};
-	};
-
-	/* devices contained int the flipper chipset */
-	flipper {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "nintendo,flipper";
-		ranges = <0x0c000000 0x0c000000 0x00010000>;
-		interrupt-parent = <&PIC>;
-
-		video@0c002000 {
-			compatible = "nintendo,flipper-vi";
-			reg = <0x0c002000 0x100>;
-			interrupts = <8>;
-		};
-
-		processor-interface@0c003000 {
-			compatible = "nintendo,flipper-pi";
-			reg = <0x0c003000 0x100>;
-
-			PIC: pic {
-				#interrupt-cells = <1>;
-				compatible = "nintendo,flipper-pic";
-				interrupt-controller;
-			};
-		};
-
-		dsp@0c005000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "nintendo,flipper-dsp";
-			reg = <0x0c005000 0x200>;
-			interrupts = <6>;
-
-			memory@0 {
-				compatible = "nintendo,flipper-aram";
-				reg = <0 0x1000000>;	/* 16MB */
-			};
-		};
-
-		disk@0c006000 {
-			compatible = "nintendo,flipper-di";
-			reg = <0x0c006000 0x40>;
-			interrupts = <2>;
-		};
-
-		audio@0c006c00 {
-			compatible = "nintendo,flipper-ai";
-			reg = <0x0c006c00 0x20>;
-			interrupts = <6>;
-		};
-
-		gamepad-controller@0c006400 {
-			compatible = "nintendo,flipper-si";
-			reg = <0x0c006400 0x100>;
-			interrupts = <3>;
-		};
-
-		/* External Interface bus */
-		exi@0c006800 {
-			compatible = "nintendo,flipper-exi";
-			reg = <0x0c006800 0x40>;
-			virtual-reg = <0x0c006800>;
-			interrupts = <4>;
-		};
-        };
-};
-
diff --git a/src/powerpc/ge_imp3a.dts b/src/powerpc/ge_imp3a.dts
deleted file mode 100644
index fefae416a097..000000000000
--- a/src/powerpc/ge_imp3a.dts
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * GE IMP3A Device Tree Source
- *
- * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Based on: P2020 DS Device Tree Source
- * Copyright 2009 Freescale Semiconductor Inc.
- */
-
-/include/ "fsl/p2020si-pre.dtsi"
-
-/ {
-	model = "GE_IMP3A";
-	compatible = "ge,imp3a";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@fef05000 {
-		reg = <0 0xfef05000 0 0x1000>;
-
-		ranges = <0x0 0x0 0x0 0xff000000 0x01000000
-			  0x1 0x0 0x0 0xe0000000 0x08000000
-			  0x2 0x0 0x0 0xe8000000 0x08000000
-			  0x3 0x0 0x0 0xfc100000 0x00020000
-			  0x4 0x0 0x0 0xfc000000 0x00008000
-			  0x5 0x0 0x0 0xfc008000 0x00008000
-			  0x6 0x0 0x0 0xfee00000 0x00040000
-			  0x7 0x0 0x0 0xfee80000 0x00040000>;
-
-		/* nor@0,0 is a mirror of part of the memory in nor@1,0
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "ge,imp3a-firmware-mirror", "cfi-flash";
-			reg = <0x0 0x0 0x1000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x1000000>;
-				read-only;
-			};
-		};
-		*/
-
-		nor@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "ge,imp3a-paged-flash", "cfi-flash";
-			reg = <0x1 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				label = "user";
-				reg = <0x0 0x7800000>;
-			};
-
-			partition@7800000 {
-				label = "firmware";
-				reg = <0x7800000 0x800000>;
-				read-only;
-			};
-		};
-
-		nvram@3,0 {
-			device_type = "nvram";
-			compatible = "simtek,stk14ca8";
-			reg = <0x3 0x0 0x20000>;
-		};
-
-		fpga@4,0 {
-			compatible = "ge,imp3a-fpga-regs";
-			reg = <0x4 0x0 0x20>;
-		};
-
-		gef_pic: pic@4,20 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			device_type = "interrupt-controller";
-			compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00";
-			reg = <0x4 0x20 0x20>;
-			interrupts = <6 7 0 0>;
-		};
-
-		gef_gpio: gpio@4,400 {
-			#gpio-cells = <2>;
-			compatible = "ge,imp3a-gpio";
-			reg = <0x4 0x400 0x24>;
-			gpio-controller;
-		};
-
-		wdt@4,800 {
-			compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
-				"gef,fpga-wdt";
-			reg = <0x4 0x800 0x8>;
-			interrupts = <10 4>;
-			interrupt-parent = <&gef_pic>;
-		};
-
-		/* Second watchdog available, driver currently supports one.
-		wdt@4,808 {
-			compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
-				"gef,fpga-wdt";
-			reg = <0x4 0x808 0x8>;
-			interrupts = <9 4>;
-			interrupt-parent = <&gef_pic>;
-		};
-		*/
-
-		nand@6,0 {
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x6 0x0 0x40000>;
-		};
-
-		nand@7,0 {
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x7 0x0 0x40000>;
-		};
-	};
-
-	soc: soc@fef00000 {
-		ranges = <0x0 0 0xfef00000 0x100000>;
-
-		i2c@3000 {
-			hwmon@48 {
-				compatible = "national,lm92";
-				reg = <0x48>;
-			};
-
-			hwmon@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			rtc@51 {
-				compatible = "epson,rx8581";
-				reg = <0x51>;
-			};
-
-			eti@6b {
-				compatible = "dallas,ds1682";
-				reg = <0x6b>;
-			};
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-			dr_mode = "host";
-		};
-
-		mdio@24520 {
-			phy0: ethernet-phy@0 {
-				interrupt-parent = <&gef_pic>;
-				interrupts = <0xc 0x4>;
-				reg = <0x1>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&gef_pic>;
-				interrupts = <0xb 0x4>;
-				reg = <0x2>;
-			};
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		mdio@25520 {
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		mdio@26520 {
-			status = "disabled";
-		};
-
-		enet0: ethernet@24000 {
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "gmii";
-		};
-
-		enet1: ethernet@25000 {
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "gmii";
-		};
-
-		enet2: ethernet@26000 {
-			status = "disabled";
-		};
-	};
-
-	pci0: pcie@fef08000 {
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>;
-		reg = <0 0xfef08000 0 0x1000>;
-
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-
-	pci1: pcie@fef09000 {
-		reg = <0 0xfef09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>;
-
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-
-	};
-
-	pci2: pcie@fef0a000 {
-		reg = <0 0xfef0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>;
-
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-};
-
-/include/ "fsl/p2020si-post.dtsi"
diff --git a/src/powerpc/gef_ppc9a.dts b/src/powerpc/gef_ppc9a.dts
deleted file mode 100644
index 83eb0fda2666..000000000000
--- a/src/powerpc/gef_ppc9a.dts
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * GE PPC9A Device Tree Source
- *
- * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Based on: SBS CM6 Device Tree Source
- * Copyright 2007 SBS Technologies GmbH & Co. KG
- * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
- * Copyright 2006 Freescale Semiconductor Inc.
- */
-
-/*
- * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
- */
-
-/dts-v1/;
-
-/ {
-	model = "GEF_PPC9A";
-	compatible = "gef,ppc9a";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;	// set by uboot
-	};
-
-	localbus@fef05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
-		reg = <0xfef05000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
-			  1 0 0xe8000000 0x08000000	// Paged Flash 0
-			  2 0 0xe0000000 0x08000000	// Paged Flash 1
-			  3 0 0xfc100000 0x00020000	// NVRAM
-			  4 0 0xfc000000 0x00008000	// FPGA
-			  5 0 0xfc008000 0x00008000	// AFIX FPGA
-			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
-			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
-
-		/* flash@0,0 is a mirror of part of the memory in flash@1,0
-		flash@0,0 {
-			compatible = "gef,ppc9a-firmware-mirror", "cfi-flash";
-			reg = <0x0 0x0 0x1000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x1000000>;
-				read-only;
-			};
-		};
-		*/
-
-		flash@1,0 {
-			compatible = "gef,ppc9a-paged-flash", "cfi-flash";
-			reg = <0x1 0x0 0x8000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "user";
-				reg = <0x0 0x7800000>;
-			};
-			partition@7800000 {
-				label = "firmware";
-				reg = <0x7800000 0x800000>;
-				read-only;
-			};
-		};
-
-		nvram@3,0 {
-			device_type = "nvram";
-			compatible = "simtek,stk14ca8";
-			reg = <0x3 0x0 0x20000>;
-		};
-
-		fpga@4,0 {
-			compatible = "gef,ppc9a-fpga-regs";
-			reg = <0x4 0x0 0x40>;
-		};
-
-		wdt@4,2000 {
-			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
-				"gef,fpga-wdt";
-			reg = <0x4 0x2000 0x8>;
-			interrupts = <0x1a 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-		/* Second watchdog available, driver currently supports one.
-		wdt@4,2010 {
-			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
-				"gef,fpga-wdt";
-			reg = <0x4 0x2010 0x8>;
-			interrupts = <0x1b 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-		*/
-		gef_pic: pic@4,4000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
-			reg = <0x4 0x4000 0x20>;
-			interrupts = <0x8
-				      0x9>;
-			interrupt-parent = <&mpic>;
-
-		};
-		gef_gpio: gpio@7,14000 {
-			#gpio-cells = <2>;
-			compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio";
-			reg = <0x7 0x14000 0x24>;
-			gpio-controller;
-		};
-	};
-
-	soc@fef00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		device_type = "soc";
-		compatible = "fsl,mpc8641-soc", "simple-bus";
-		ranges = <0x0 0xfef00000 0x00100000>;
-		bus-frequency = <33333333>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c1: i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			hwmon@48 {
-				compatible = "national,lm92";
-				reg = <0x48>;
-			};
-
-			hwmon@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			rtc@51 {
-				compatible = "epson,rx8581";
-				reg = <0x00000051>;
-			};
-
-			eti@6b {
-				compatible = "dallas,ds1682";
-				reg = <0x6b>;
-			};
-		};
-
-		i2c2: i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30  2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x9 0x4>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x8 0x4>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x2a 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x1c 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@fef08000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xfef08000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
-			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <0x18 0x2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
-		>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0x80000000
-				  0x02000000 0x0 0x80000000
-				  0x0 0x40000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00400000>;
-		};
-	};
-};
diff --git a/src/powerpc/gef_sbc310.dts b/src/powerpc/gef_sbc310.dts
deleted file mode 100644
index d426dd3de9ef..000000000000
--- a/src/powerpc/gef_sbc310.dts
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * GE SBC310 Device Tree Source
- *
- * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Based on: SBS CM6 Device Tree Source
- * Copyright 2007 SBS Technologies GmbH & Co. KG
- * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
- * Copyright 2006 Freescale Semiconductor Inc.
- */
-
-/*
- * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts
- */
-
-/dts-v1/;
-
-/ {
-	model = "GEF_SBC310";
-	compatible = "gef,sbc310";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;	// set by uboot
-	};
-
-	localbus@fef05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
-		reg = <0xfef05000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
-			  1 0 0xe0000000 0x08000000	// Paged Flash 0
-			  2 0 0xe8000000 0x08000000	// Paged Flash 1
-			  3 0 0xfc100000 0x00020000	// NVRAM
-			  4 0 0xfc000000 0x00010000>;	// FPGA
-
-		/* flash@0,0 is a mirror of part of the memory in flash@1,0
-		flash@0,0 {
-			compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
-			reg = <0x0 0x0 0x01000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x01000000>;
-				read-only;
-			};
-		};
-		*/
-
-		flash@1,0 {
-			compatible = "gef,sbc310-paged-flash", "cfi-flash";
-			reg = <0x1 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "user";
-				reg = <0x0 0x7800000>;
-			};
-			partition@7800000 {
-				label = "firmware";
-				reg = <0x7800000 0x800000>;
-				read-only;
-			};
-		};
-
-		nvram@3,0 {
-			device_type = "nvram";
-			compatible = "simtek,stk14ca8";
-			reg = <0x3 0x0 0x20000>;
-		};
-
-		fpga@4,0 {
-			compatible = "gef,fpga-regs";
-			reg = <0x4 0x0 0x40>;
-		};
-
-		wdt@4,2000 {
-			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
-				"gef,fpga-wdt";
-			reg = <0x4 0x2000 0x8>;
-			interrupts = <0x1a 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-/*
-		wdt@4,2010 {
-			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
-				"gef,fpga-wdt";
-			reg = <0x4 0x2010 0x8>;
-			interrupts = <0x1b 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-*/
-		gef_pic: pic@4,4000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
-			reg = <0x4 0x4000 0x20>;
-			interrupts = <0x8
-				      0x9>;
-			interrupt-parent = <&mpic>;
-
-		};
-		gef_gpio: gpio@4,8000 {
-			#gpio-cells = <2>;
-			compatible = "gef,sbc310-gpio";
-			reg = <0x4 0x8000 0x24>;
-			gpio-controller;
-		};
-	};
-
-	soc@fef00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		device_type = "soc";
-		compatible = "fsl,mpc8641-soc", "simple-bus";
-		ranges = <0x0 0xfef00000 0x00100000>;
-		bus-frequency = <33333333>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c1: i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			rtc@51 {
-				compatible = "epson,rx8581";
-				reg = <0x00000051>;
-			};
-		};
-
-		i2c2: i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			hwmon@48 {
-				compatible = "national,lm92";
-				reg = <0x48>;
-			};
-
-			hwmon@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			eti@6b {
-				compatible = "dallas,ds1682";
-				reg = <0x6b>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30  2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x9 0x4>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x8 0x4>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x2a 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x1c 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@fef08000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xfef08000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
-			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <0x18 0x2>;
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-			0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
-			0x0000 0x0 0x0 0x2 &mpic 0x1 0x2
-			0x0000 0x0 0x0 0x3 &mpic 0x2 0x2
-			0x0000 0x0 0x0 0x4 &mpic 0x3 0x2
-		>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0x80000000
-				  0x02000000 0x0 0x80000000
-				  0x0 0x40000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00400000>;
-		};
-	};
-
-	pci1: pcie@fef09000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xfef09000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <0x19 0x2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
-			0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
-			0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
-			0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
-			>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xc0000000
-				  0x02000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00400000>;
-		};
-	};
-};
diff --git a/src/powerpc/gef_sbc610.dts b/src/powerpc/gef_sbc610.dts
deleted file mode 100644
index 5db3399b76b7..000000000000
--- a/src/powerpc/gef_sbc610.dts
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * GE SBC610 Device Tree Source
- *
- * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Based on: SBS CM6 Device Tree Source
- * Copyright 2007 SBS Technologies GmbH & Co. KG
- * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
- * Copyright 2006 Freescale Semiconductor Inc.
- */
-
-/*
- * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
- */
-
-/dts-v1/;
-
-/ {
-	model = "GEF_SBC610";
-	compatible = "gef,sbc610";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;	// set by uboot
-	};
-
-	localbus@fef05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
-		reg = <0xfef05000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
-			  1 0 0xe8000000 0x08000000	// Paged Flash 0
-			  2 0 0xe0000000 0x08000000	// Paged Flash 1
-			  3 0 0xfc100000 0x00020000	// NVRAM
-			  4 0 0xfc000000 0x00008000	// FPGA
-			  5 0 0xfc008000 0x00008000	// AFIX FPGA
-			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
-			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
-
-		/* flash@0,0 is a mirror of part of the memory in flash@1,0
-		flash@0,0 {
-			compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
-			reg = <0x0 0x0 0x1000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x1000000>;
-				read-only;
-			};
-		};
-		*/
-
-		flash@1,0 {
-			compatible = "gef,sbc610-paged-flash", "cfi-flash";
-			reg = <0x1 0x0 0x8000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "user";
-				reg = <0x0 0x7800000>;
-			};
-			partition@7800000 {
-				label = "firmware";
-				reg = <0x7800000 0x800000>;
-				read-only;
-			};
-		};
-
-		nvram@3,0 {
-			device_type = "nvram";
-			compatible = "simtek,stk14ca8";
-			reg = <0x3 0x0 0x20000>;
-		};
-
-		fpga@4,0 {
-			compatible = "gef,fpga-regs";
-			reg = <0x4 0x0 0x40>;
-		};
-
-		wdt@4,2000 {
-			compatible = "gef,fpga-wdt";
-			reg = <0x4 0x2000 0x8>;
-			interrupts = <0x1a 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-		/* Second watchdog available, driver currently supports one.
-		wdt@4,2010 {
-			compatible = "gef,fpga-wdt";
-			reg = <0x4 0x2010 0x8>;
-			interrupts = <0x1b 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-		*/
-		gef_pic: pic@4,4000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "gef,fpga-pic";
-			reg = <0x4 0x4000 0x20>;
-			interrupts = <0x8
-				      0x9>;
-			interrupt-parent = <&mpic>;
-
-		};
-		gef_gpio: gpio@7,14000 {
-			#gpio-cells = <2>;
-			compatible = "gef,sbc610-gpio";
-			reg = <0x7 0x14000 0x24>;
-			gpio-controller;
-		};
-	};
-
-	soc@fef00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xfef00000 0x00100000>;
-		bus-frequency = <33333333>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c1: i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			hwmon@48 {
-				compatible = "national,lm92";
-				reg = <0x48>;
-			};
-
-			hwmon@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			rtc@51 {
-				compatible = "epson,rx8581";
-				reg = <0x00000051>;
-			};
-
-			eti@6b {
-				compatible = "dallas,ds1682";
-				reg = <0x6b>;
-			};
-		};
-
-		i2c2: i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30  2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x9 0x4>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x8 0x4>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x2a 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x1c 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@fef08000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xfef08000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
-			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <0x18 0x2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
-		>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0x80000000
-				  0x02000000 0x0 0x80000000
-				  0x0 0x40000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00400000>;
-		};
-	};
-};
diff --git a/src/powerpc/glacier.dts b/src/powerpc/glacier.dts
deleted file mode 100644
index 2000060386d7..000000000000
--- a/src/powerpc/glacier.dts
+++ /dev/null
@@ -1,576 +0,0 @@
-/*
- * Device Tree Source for AMCC Glacier (460GT)
- *
- * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "amcc,glacier";
-	compatible = "amcc,glacier";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		ethernet2 = &EMAC2;
-		ethernet3 = &EMAC3;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,460GT";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			next-level-cache = <&L2C0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-460gt","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-460gt","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-460gt","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC3: interrupt-controller3 {
-		compatible = "ibm,uic-460gt","ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x0f0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-460gt";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-460gt";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	L2C0: l2c {
-		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
-		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
-			   0x030 0x008>;	/* L2 cache DCR's */
-		cache-line-size = <32>;		/* 32 bytes */
-		cache-size = <262144>;		/* L2, 256K */
-		interrupt-parent = <&UIC1>;
-		interrupts = <11 1>;
-	};
-
-	plb {
-		compatible = "ibm,plb-460gt", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		CRYPTO: crypto@180000 {
-			compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto",
-				"amcc,ppc4xx-crypto";
-			reg = <4 0x00180000 0x80400>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <0x1d 0x4>;
-		};
-
-		HWRNG: hwrng@110000 {
-			compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
-			reg = <4 0x00110000 0x50>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <4>;
-			num-rx-chans = <32>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 0x6 0x4
-					/*RXEOB*/ 0x7 0x4
-					/*SERR*/  0x3 0x4
-					/*TXDE*/  0x4 0x4
-					/*RXDE*/  0x5 0x4>;
-			desc-base-addr-high = <0x8>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-460gt", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-460gt", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x6 0x4>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x001e0000>;
-					};
-					partition@1e0000 {
-						label = "dtb";
-						reg = <0x001e0000 0x00020000>;
-					};
-					partition@200000 {
-						label = "ramdisk";
-						reg = <0x00200000 0x01400000>;
-					};
-					partition@1600000 {
-						label = "jffs2";
-						reg = <0x01600000 0x00400000>;
-					};
-					partition@1a00000 {
-						label = "user";
-						reg = <0x01a00000 0x02560000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-
-				ndfc@3,0 {
-					compatible = "ibm,ndfc";
-					reg = <0x00000003 0x00000000 0x00002000>;
-					ccr = <0x00001000>;
-					bank-settings = <0x80002222>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					nand {
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						partition@0 {
-							label = "u-boot";
-							reg = <0x00000000 0x00100000>;
-						};
-						partition@100000 {
-							label = "user";
-							reg = <0x00000000 0x03f00000>;
-						};
-					};
-				};
-			};
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1 0x4>;
-			};
-
-			UART1: serial@ef600400 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600400 0x00000008>;
-				virtual-reg = <0xef600400>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			UART2: serial@ef600500 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600500 0x00000008>;
-				virtual-reg = <0xef600500>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC1>;
-				interrupts = <28 0x4>;
-			};
-
-			UART3: serial@ef600600 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600600 0x00000008>;
-				virtual-reg = <0xef600600>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC1>;
-				interrupts = <29 0x4>;
-			};
-
-			IIC0: i2c@ef600700 {
-				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <0xef600700 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rtc@68 {
-					compatible = "stm,m41t80";
-					reg = <0x68>;
-					interrupt-parent = <&UIC2>;
-					interrupts = <0x19 0x8>;
-				};
-				sttm@48 {
-					compatible = "ad,ad7414";
-					reg = <0x48>;
-					interrupt-parent = <&UIC1>;
-					interrupts = <0x14 0x8>;
-				};
-			};
-
-			IIC1: i2c@ef600800 {
-				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <0xef600800 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x3 0x4>;
-			};
-
-			ZMII0: emac-zmii@ef600d00 {
-				compatible = "ibm,zmii-460gt", "ibm,zmii";
-				reg = <0xef600d00 0x0000000c>;
-			};
-
-			RGMII0: emac-rgmii@ef601500 {
-				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
-				reg = <0xef601500 0x00000008>;
-				has-mdio;
-			};
-
-			RGMII1: emac-rgmii@ef601600 {
-				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
-				reg = <0xef601600 0x00000008>;
-				has-mdio;
-			};
-
-			TAH0: emac-tah@ef601350 {
-				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <0xef601350 0x00000030>;
-			};
-
-			TAH1: emac-tah@ef601450 {
-				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <0xef601450 0x00000030>;
-			};
-
-			EMAC0: ethernet@ef600e00 {
-				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
-						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
-				reg = <0xef600e00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				tah-device = <&TAH0>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600f00 {
-				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4sync";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
-						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
-				reg = <0xef600f00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <8>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				tah-device = <&TAH1>;
-				tah-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-
-			EMAC2: ethernet@ef601100 {
-				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4sync";
-				interrupt-parent = <&EMAC2>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
-						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
-				reg = <0xef601100 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <2>;
-				mal-rx-channel = <16>;
-				cell-index = <2>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>; /* emac2&3 only */
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII1>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-
-			EMAC3: ethernet@ef601200 {
-				device_type = "network";
-				compatible = "ibm,emac-460gt", "ibm,emac4sync";
-				interrupt-parent = <&EMAC3>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
-						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
-				reg = <0xef601200 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <3>;
-				mal-rx-channel = <24>;
-				cell-index = <3>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>; /* emac2&3 only */
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII1>;
-				rgmii-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-		};
-
-		PCIX0: pci@c0ec00000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
-			primary;
-			large-inbound-windows;
-			enable-msi-hole;
-			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
-			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
-			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
-			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
-			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
-				  0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
-				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0 to 0x3f */
-			bus-range = <0x0 0x3f>;
-
-			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
-			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
-		};
-
-		PCIE0: pciex@d00000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
-			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
-			dcr-reg = <0x100 0x020>;
-			sdr-base = <0x300>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
-				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 40 to 0x7f */
-			bus-range = <0x40 0x7f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
-		};
-
-		PCIE1: pciex@d20000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
-			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
-			dcr-reg = <0x120 0x020>;
-			sdr-base = <0x340>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
-				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 80 to 0xbf */
-			bus-range = <0x80 0xbf>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
-		};
-	};
-};
diff --git a/src/powerpc/haleakala.dts b/src/powerpc/haleakala.dts
deleted file mode 100644
index 2b256694eca6..000000000000
--- a/src/powerpc/haleakala.dts
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Device Tree Source for AMCC Haleakala (405EXr)
- *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "amcc,haleakala";
-	compatible = "amcc,haleakala", "amcc,kilauea";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EXr";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>; /* 16 kB */
-			d-cache-size = <16384>; /* 16 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic-405exr", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-405exr","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-405exr","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	plb {
-		compatible = "ibm,plb-405exr", "ibm,plb4";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2";
-			dcr-reg = <0x010 0x002>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <0x5 0x4	/* ECC DED Error */ 
-				      0x6 0x4>;	/* ECC SEC Error */ 
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-405exr", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405exr", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x80000000 0x80000000 0x10000000
-				  0xef600000 0xef600000 0x00a00000
-				  0xf0000000 0xf0000000 0x10000000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-405exr", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x00200000>;
-					};
-					partition@200000 {
-						label = "root";
-						reg = <0x00200000 0x00200000>;
-					};
-					partition@400000 {
-						label = "user";
-						reg = <0x00400000 0x03b60000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-			};
-
-			UART0: serial@ef600200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600200 0x00000008>;
-				virtual-reg = <0xef600200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1a 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600400 {
-				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <0xef600400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			IIC1: i2c@ef600500 {
-				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <0xef600500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-
-			RGMII0: emac-rgmii@ef600b00 {
-				compatible = "ibm,rgmii-405exr", "ibm,rgmii";
-				reg = <0xef600b00 0x00000104>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405exr", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
-						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
-				reg = <0xef600900 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCIE0: pciex@0a0000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0xa0000000 0x20000000	/* Config space access */
-			       0xef000000 0x00001000>;	/* Registers */
-			dcr-reg = <0x040 0x020>;
-			sdr-base = <0x400>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
-				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0x00 to 0x3f */
-			bus-range = <0x0 0x3f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
-		};
-	};
-};
diff --git a/src/powerpc/holly.dts b/src/powerpc/holly.dts
deleted file mode 100644
index 43e6f0c8e449..000000000000
--- a/src/powerpc/holly.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Device Tree Source for IBM Holly (PPC 750CL with TSI controller)
- * Copyright 2007, IBM Corporation
- *
- * Stephen Winiecki <stevewin@us.ibm.com>
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	model = "41K7339";
-	compatible = "ibm,holly";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells =<0>;
-		PowerPC,750CL@0 {
-			device_type = "cpu";
-			reg = <0x00000000>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			d-cache-sets = <128>;
-			i-cache-sets = <128>;
-			timebase-frequency = <50000000>;
-			clock-frequency = <600000000>;
-			bus-frequency = <200000000>;
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-  	tsi109@c0000000 {
-		device_type = "tsi-bridge";
-		compatible = "tsi109-bridge", "tsi108-bridge";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 0xc0000000 0x00010000>;
-		reg = <0xc0000000 0x00010000>;
-
-		i2c@7000 {
-			device_type = "i2c";
-			compatible  = "tsi109-i2c", "tsi108-i2c";
-			interrupt-parent = <&MPIC>;
-			interrupts = <0xe 0x2>;
-			reg = <0x00007000 0x00000400>;
-		};
-
-		MDIO: mdio@6000 {
-			compatible = "tsi109-mdio", "tsi108-mdio";
-			reg = <0x00006000 0x00000050>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			PHY1: ethernet-phy@1 {
-				compatible = "bcm5461a";
-				reg = <0x00000001>;
-				txc-rxc-delay-disable;
-			};
-
-			PHY2: ethernet-phy@2 {
-				compatible = "bcm5461a";
-				reg = <0x00000002>;
-				txc-rxc-delay-disable;
-			};
-		};
-
-		ethernet@6200 {
-			device_type = "network";
-			compatible = "tsi109-ethernet", "tsi108-ethernet";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x00006000 0x00000200>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&MPIC>;
-			interrupts = <0x10 0x2>;
-			mdio-handle = <&MDIO>;
-			phy-handle = <&PHY1>;
-		};
-
-		ethernet@6600 {
-			device_type = "network";
-			compatible = "tsi109-ethernet", "tsi108-ethernet";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x00006400 0x00000200>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupt-parent = <&MPIC>;
-			interrupts = <0x11 0x2>;
-			mdio-handle = <&MDIO>;
-			phy-handle = <&PHY2>;
-		};
-
-		serial@7808 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x00007808 0x00000200>;
-			virtual-reg = <0xc0007808>;
-			clock-frequency = <1067212800>;
-			current-speed = <115200>;
-			interrupt-parent = <&MPIC>;
-			interrupts = <0xc 0x2>;
-		};
-
-		serial@7c08 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x00007c08 0x00000200>;
-			virtual-reg = <0xc0007c08>;
-			clock-frequency = <1067212800>;
-			current-speed = <115200>;
-			interrupt-parent = <&MPIC>;
-			interrupts = <0xd 0x2>;
-		};
-
-	  	MPIC: pic@7400 {
-			device_type = "open-pic";
-			compatible = "chrp,open-pic";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x00007400 0x00000400>;
-			big-endian;
-		};
-	};
-
-	pci@c0001000 {
-		device_type = "pci";
-		compatible = "tsi109-pci", "tsi108-pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xc0001000 0x00001000>;
-		bus-range = <0x0 0x0>;
-		/*----------------------------------------------------+
-		| PCI memory range.
-		| 01 denotes I/O space
-		| 02 denotes 32-bit memory space
-		+----------------------------------------------------*/
-		ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
-			  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
-		clock-frequency = <133333332>;
-		interrupt-parent = <&MPIC>;
-		interrupts = <0x17 0x2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		/*----------------------------------------------------+
-		| The INTA, INTB, INTC, INTD are shared.
-		+----------------------------------------------------*/
-		interrupt-map = <
-			0x800 0x0 0x0 0x1 &RT0 0x24 0x0
-			0x800 0x0 0x0 0x2 &RT0 0x25 0x0
-			0x800 0x0 0x0 0x3 &RT0 0x26 0x0
-			0x800 0x0 0x0 0x4 &RT0 0x27 0x0
-
-			0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
-			0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
-			0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
-			0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
-
-			0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
-			0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
-			0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
-			0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
-
-			0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
-			0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
-			0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
-			0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
-			>;
-
-		RT0: router@1180 {
-			device_type = "pic-router";
-			interrupt-controller;
-			big-endian;
-			clock-frequency = <0>;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			interrupts = <0x17 0x2>;
-			interrupt-parent = <&MPIC>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/tsi109@c0000000/serial@7808";
-	};
-};
diff --git a/src/powerpc/hotfoot.dts b/src/powerpc/hotfoot.dts
deleted file mode 100644
index 71d3bb4931dc..000000000000
--- a/src/powerpc/hotfoot.dts
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Device Tree Source for ESTeem 195E Hotfoot
- *
- * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "est,hotfoot";
-	compatible = "est,hotfoot";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EP";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <0x20>;
-			d-cache-line-size = <0x20>;
-			i-cache-size = <0x4000>;
-			d-cache-size = <0x4000>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	plb {
-		compatible = "ibm,plb3";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405ep";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL: mcmal {
-			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <4>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <
-				0xb 0x4 /* TXEOB */
-				0xc 0x4 /* RXEOB */
-				0xa 0x4 /* SERR */
-				0xd 0x4 /* TXDE */
-				0xe 0x4 /* RXDE */>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405ep", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xef600000 0xef600000 0x00a00000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by zImage */
-
-			/* Hotfoot has UART0/UART1 swapped */
-
-			UART0: serial@ef600400 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600400 0x00000008>;
-				virtual-reg = <0xef600400>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <0x9600>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <0x9600>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			IIC: i2c@ef600500 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "ibm,iic-405ep", "ibm,iic";
-				reg = <0xef600500 0x00000011>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-
-				rtc@68 {
-					/* Actually a DS1339 */
-					compatible = "dallas,ds1307";
-					reg = <0x68>;
-				};
-
-				temp@4a {
-					/* Not present on all boards */
-					compatible = "national,lm75";
-					reg = <0x4a>;
-				};
-			};
-
-			GPIO: gpio@ef600700 {
-				#gpio-cells = <2>;
-				compatible = "ibm,ppc4xx-gpio";
-				reg = <0xef600700 0x00000020>;
-				gpio-controller;
-			};
-
-			gpio-leds {
-				compatible = "gpio-leds";
-				status {
-					label = "Status";
-					gpios = <&GPIO 1 0>;
-				};
-				radiorx {
-					label = "Rx";
-					gpios = <&GPIO 0xe 0>;
-				};
-			};
-
-			EMAC0: ethernet@ef600800 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405ep", "ibm,emac";
-				interrupt-parent = <&UIC0>;
-				interrupts = <
-					0xf 0x4 /* Ethernet */
-					0x9 0x4 /* Ethernet Wake Up */>;
-				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <0xef600800 0x00000070>;
-				mal-device = <&MAL>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <0x5dc>;
-				rx-fifo-size = <0x1000>;
-				tx-fifo-size = <0x800>;
-				phy-mode = "mii";
-				phy-map = <0x00000000>;
-			};
-
-			EMAC1: ethernet@ef600900 {
-				linux,network-index = <0x1>;
-				device_type = "network";
-				compatible = "ibm,emac-405ep", "ibm,emac";
-				interrupt-parent = <&UIC0>;
-				interrupts = <
-					0x11 0x4 /* Ethernet */
-					0x9 0x4 /* Ethernet Wake Up */>;
-				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <0xef600900 0x00000070>;
-				mal-device = <&MAL>;
-				mal-tx-channel = <2>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <0x5dc>;
-				rx-fifo-size = <0x1000>;
-				tx-fifo-size = <0x800>;
-				mdio-device = <&EMAC0>;
-				phy-mode = "mii";
-				phy-map = <0x0000001>;
-			};
-		};
-
-		EBC0: ebc {
-			compatible = "ibm,ebc-405ep", "ibm,ebc";
-			dcr-reg = <0x012 0x002>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-
-			/* The ranges property is supplied by the bootwrapper
-			 * and is based on the firmware's configuration of the
-			 * EBC bridge
-			 */
-			clock-frequency = <0>; /* Filled in by zImage */
-
-			nor_flash@0 {
-				compatible = "cfi-flash";
-				bank-width = <2>;
-				reg = <0x0 0xff800000 0x00800000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				/* This mapping is for the 8M flash
-				   4M flash has all ofssets -= 4M,
-				   and FeatFS partition is not present */
-				partition@0 {
-					label = "Bootloader";
-					reg = <0x7c0000 0x40000>;
-					/* read-only; */
-				};
-				partition@1 {
-					label = "Env_and_Config_Primary";
-					reg = <0x400000 0x10000>;
-				};
-				partition@2 {
-					label = "Kernel";
-					reg = <0x420000 0x100000>;
-				};
-				partition@3 {
-					label = "Filesystem";
-					reg = <0x520000 0x2a0000>;
-				};
-				partition@4 {
-					label = "Env_and_Config_Secondary";
-					reg = <0x410000 0x10000>;
-				};
-				partition@5 {
-					label = "FeatFS";
-					reg = <0x000000 0x400000>;
-				};
-				partition@6 {
-					label = "Bootloader_Env";
-					reg = <0x7d0000 0x10000>;
-				};
-			};
-		};
-
-		PCI0: pci@ec000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
-			primary;
-			reg = <0xeec00000 0x00000008    /* Config space access */
-				0xeed80000 0x00000004    /* IACK */
-				0xeed80000 0x00000004    /* Special cycle */
-				0xef480000 0x00000040>;  /* Internal registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed. Chip supports a second
-			 * IO range but we don't use it for now
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
-				0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			interrupt-parent = <&UIC0>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
-				0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
-				0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8
-
-				/* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
-				0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
-				0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
-				>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = &UART0;
-	};
-};
diff --git a/src/powerpc/icon.dts b/src/powerpc/icon.dts
deleted file mode 100644
index abcd0caeccae..000000000000
--- a/src/powerpc/icon.dts
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * Device Tree Source for Mosaix Technologies, Inc. ICON board
- *
- * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	model = "mosaixtech,icon";
-	compatible = "mosaixtech,icon";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		serial0 = &UART0;
-		serial1 = &UART1;
-		serial2 = &UART2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,440SPe";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			reset-type = <2>;	/* Use chip-reset */
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-440spe","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-440spe","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-440spe","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC3: interrupt-controller3 {
-		compatible = "ibm,uic-440spe","ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x0f0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-440spe";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-440spe";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	MQ0: mq {
-		compatible = "ibm,mq-440spe";
-		dcr-reg = <0x040 0x020>;
-	};
-
-	plb {
-		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		/*        addr-child     addr-parent    size */
-		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
-			  0x4 0x00200000 0x4 0x00200000 0x00000400
-			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
-			  0xc 0x00000000 0xc 0x00000000 0x20000000
-			  0xd 0x00000000 0xd 0x00000000 0x80000000
-			  0xd 0x80000000 0xd 0x80000000 0x80000000
-			  0xe 0x00000000 0xe 0x00000000 0x80000000
-			  0xe 0x80000000 0xe 0x80000000 0x80000000
-			  0xf 0x00000000 0xf 0x00000000 0x80000000
-			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <1>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
-					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
-					 /*SERR*/  0x2 &UIC1 0x1 0x4
-					 /*TXDE*/  0x3 &UIC1 0x2 0x4
-					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x01000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x001e0000>;
-					};
-					partition@1e0000 {
-						label = "dtb";
-						reg = <0x001e0000 0x00020000>;
-					};
-					partition@200000 {
-						label = "root";
-						reg = <0x00200000 0x00200000>;
-					};
-					partition@400000 {
-						label = "user";
-						reg = <0x00400000 0x00b60000>;
-					};
-					partition@f60000 {
-						label = "env";
-						reg = <0x00f60000 0x00040000>;
-					};
-					partition@fa0000 {
-						label = "u-boot";
-						reg = <0x00fa0000 0x00060000>;
-					};
-				};
-
-				SysACE_CompactFlash: sysace@1,0 {
-					compatible = "xlnx,sysace";
-					interrupt-parent = <&UIC2>;
-					interrupts = <24 0x4>;
-					reg = <0x00000001 0x00000000 0x10000>;
-				};
-			};
-
-			UART0: serial@f0000200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xf0000200 0x00000008>;
-				virtual-reg = <0xa0000200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <115200>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			UART1: serial@f0000300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xf0000300 0x00000008>;
-				virtual-reg = <0xa0000300>;
-				clock-frequency = <0>;
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-
-			UART2: serial@f0000600 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xf0000600 0x00000008>;
-				virtual-reg = <0xa0000600>;
-				clock-frequency = <0>;
-				current-speed = <0>;
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x5 0x4>;
-			};
-
-			IIC0: i2c@f0000400 {
-				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <0xf0000400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			IIC1: i2c@f0000500 {
-				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <0xf0000500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x3 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-                                rtc@68 {
-                                        compatible = "stm,m41t00";
-                                        reg = <0x68>;
-                                };
-			};
-
-			EMAC0: ethernet@f0000800 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-440spe", "ibm,emac4";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1c 0x4 0x1d 0x4>;
-				reg = <0xf0000800 0x00000074>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "gmii";
-				phy-map = <0x00000000>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCIX0: pci@c0ec00000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
-			primary;
-			large-inbound-windows;
-			enable-msi-hole;
-			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
-			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
-			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
-			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
-			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
-
-			/* Inbound 4GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
-
-			/* This drives busses 0 to 0xf */
-			bus-range = <0x0 0xf>;
-
-			/* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
-			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
-			interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
-		};
-
-		PCIE0: pciex@d00000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
-			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
-			dcr-reg = <0x100 0x020>;
-			sdr-base = <0x300>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
-
-			/* Inbound 4GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
-
-			/* This drives busses 0x10 to 0x1f */
-			bus-range = <0x10 0x1f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
-		};
-
-		PCIE1: pciex@d20000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
-			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
-			dcr-reg = <0x120 0x020>;
-			sdr-base = <0x340>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
-
-			/* Inbound 4GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
-
-			/* This drives busses 0x20 to 0x2f */
-			bus-range = <0x20 0x2f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
-		};
-
-		I2O: i2o@400100000 {
-			compatible = "ibm,i2o-440spe";
-			reg = <0x00000004 0x00100000 0x100>;
-			dcr-reg = <0x060 0x020>;
-		};
-
-		DMA0: dma0@400100100 {
-			compatible = "ibm,dma-440spe";
-			cell-index = <0>;
-			reg = <0x00000004 0x00100100 0x100>;
-			dcr-reg = <0x060 0x020>;
-			interrupt-parent = <&DMA0>;
-			interrupts = <0 1>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <
-				0 &UIC0 0x14 4
-				1 &UIC1 0x16 4>;
-		};
-
-		DMA1: dma1@400100200 {
-			compatible = "ibm,dma-440spe";
-			cell-index = <1>;
-			reg = <0x00000004 0x00100200 0x100>;
-			dcr-reg = <0x060 0x020>;
-			interrupt-parent = <&DMA1>;
-			interrupts = <0 1>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <
-				0 &UIC0 0x16 4
-				1 &UIC1 0x16 4>;
-		};
-
-		xor-accel@400200000 {
-			compatible = "amcc,xor-accelerator";
-			reg = <0x00000004 0x00200000 0x400>;
-			interrupt-parent = <&UIC1>;
-			interrupts = <0x1f 4>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@f0000200";
-	};
-};
diff --git a/src/powerpc/iss4xx-mpic.dts b/src/powerpc/iss4xx-mpic.dts
deleted file mode 100644
index 23e9d9b7e400..000000000000
--- a/src/powerpc/iss4xx-mpic.dts
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Device Tree Source for IBM Embedded PPC 476 Platform
- *
- * Copyright 2010 Torez Smith, IBM Corporation.
- *
- * Based on earlier code:
- *     Copyright (c) 2006, 2007 IBM Corp.
- *     Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/memreserve/ 0x01f00000 0x00100000;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "ibm,iss-4xx";
-	compatible = "ibm,iss-4xx";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		serial0 = &UART0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,4xx"; // real CPU changed in sim
-			reg = <0>;
-			clock-frequency = <100000000>; // 100Mhz :-)
-			timebase-frequency = <100000000>;
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			status = "ok";
-		};
-		cpu@1 {
-			device_type = "cpu";
-			model = "PowerPC,4xx"; // real CPU changed in sim
-			reg = <1>;
-			clock-frequency = <100000000>; // 100Mhz :-)
-			timebase-frequency = <100000000>;
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			status = "disabled";
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x01f00100>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			model = "PowerPC,4xx"; // real CPU changed in sim
-			reg = <2>;
-			clock-frequency = <100000000>; // 100Mhz :-)
-			timebase-frequency = <100000000>;
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			status = "disabled";
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x01f00200>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			model = "PowerPC,4xx"; // real CPU changed in sim
-			reg = <3>;
-			clock-frequency = <100000000>; // 100Mhz :-)
-			timebase-frequency = <100000000>;
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			status = "disabled";
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x01f00300>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg =  <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
-
-	};
-
-	MPIC: interrupt-controller {
-		compatible = "chrp,open-pic";
-		interrupt-controller;
-		dcr-reg = <0xffc00000 0x00030000>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-
-	};
-
-	plb {
-		compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; // Filled in by zImage
-
-		POB0: opb {
-			compatible = "ibm,opb-4xx", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/* Wish there was a nicer way of specifying a full 32-bit
-			   range */
-			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
-				  0x80000000 0x00000001 0x80000000 0x80000000>;
-			clock-frequency = <0>; // Filled in by zImage
-			UART0: serial@40000200 {
-				device_type = "serial";
-				compatible = "ns16550a";
-				reg = <0x40000200 0x00000008>;
-				virtual-reg = <0xe0000200>;
-				clock-frequency = <11059200>;
-				current-speed = <115200>;
-				interrupt-parent = <&MPIC>;
-				interrupts = <0x0 0x2>;
-			};
-		};
-	};
-
-	nvrtc {
-		compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
-		reg = <0 0xEF703000 0x2000>;
-	};
-	iss-block {
-		compatible = "ibm,iss-sim-block-device";
-		reg = <0 0xEF701000 0x1000>;
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@40000200";
-	};
-};
diff --git a/src/powerpc/iss4xx.dts b/src/powerpc/iss4xx.dts
deleted file mode 100644
index 4ff6555c866d..000000000000
--- a/src/powerpc/iss4xx.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Device Tree Source for IBM Embedded PPC 476 Platform
- *
- * Copyright 2010 Torez Smith, IBM Corporation.
- *
- * Based on earlier code:
- *    Copyright (c) 2006, 2007 IBM Corp.
- *    Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "ibm,iss-4xx";
-	compatible = "ibm,iss-4xx";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		serial0 = &UART0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,4xx"; // real CPU changed in sim
-			reg = <0x00000000>;
-			clock-frequency = <100000000>; // 100Mhz :-)
-			timebase-frequency = <100000000>;
-			i-cache-line-size = <32>; // may need fixup in sim
-			d-cache-line-size = <32>; // may need fixup in sim
-			i-cache-size = <32768>; /* may need fixup in sim */
-			d-cache-size = <32768>; /* may need fixup in sim */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-4xx", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-4xx", "ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	plb {
-		compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; // Filled in by zImage
-
-		POB0: opb {
-			compatible = "ibm,opb-4xx", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/* Wish there was a nicer way of specifying a full 32-bit
-			   range */
-			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
-				  0x80000000 0x00000001 0x80000000 0x80000000>;
-			clock-frequency = <0>; // Filled in by zImage
-			UART0: serial@40000200 {
-				device_type = "serial";
-				compatible = "ns16550a";
-				reg = <0x40000200 0x00000008>;
-				virtual-reg = <0xe0000200>;
-				clock-frequency = <11059200>;
-				current-speed = <115200>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-		};
-	};
-
-	nvrtc {
-		compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
-		reg = <0 0xEF703000 0x2000>;
-	};
-	iss-block {
-		compatible = "ibm,iss-sim-block-device";
-		reg = <0 0xEF701000 0x1000>;
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@40000200";
-	};
-};
diff --git a/src/powerpc/katmai.dts b/src/powerpc/katmai.dts
deleted file mode 100644
index f913dbe25d35..000000000000
--- a/src/powerpc/katmai.dts
+++ /dev/null
@@ -1,510 +0,0 @@
-/*
- * Device Tree Source for AMCC Katmai eval board
- *
- * Copyright (c) 2006, 2007 IBM Corp.
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *
- * Copyright (c) 2006, 2007 IBM Corp.
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	model = "amcc,katmai";
-	compatible = "amcc,katmai";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		serial0 = &UART0;
-		serial1 = &UART1;
-		serial2 = &UART2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,440SPe";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-			reset-type = <2>;	/* Use chip-reset */
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-440spe","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-440spe","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-440spe","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC3: interrupt-controller3 {
-		compatible = "ibm,uic-440spe","ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x0f0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-440spe";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-440spe";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	MQ0: mq {
-		compatible = "ibm,mq-440spe";
-		dcr-reg = <0x040 0x020>;
-	};
-
-	plb {
-		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		/*        addr-child     addr-parent    size */
-		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
-			  0x4 0x00200000 0x4 0x00200000 0x00000400
-			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
-			  0xc 0x00000000 0xc 0x00000000 0x20000000
-			  0xd 0x00000000 0xd 0x00000000 0x80000000
-			  0xd 0x80000000 0xd 0x80000000 0x80000000
-			  0xe 0x00000000 0xe 0x00000000 0x80000000
-			  0xe 0x80000000 0xe 0x80000000 0x80000000
-			  0xf 0x00000000 0xf 0x00000000 0x80000000
-			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <1>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
-					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
-					 /*SERR*/  0x2 &UIC1 0x1 0x4
-					 /*TXDE*/  0x3 &UIC1 0x2 0x4
-					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
-			clock-frequency = <0>; /* Filled in by zImage */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x01000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x001e0000>;
-					};
-					partition@1e0000 {
-						label = "dtb";
-						reg = <0x001e0000 0x00020000>;
-					};
-					partition@200000 {
-						label = "root";
-						reg = <0x00200000 0x00200000>;
-					};
-					partition@400000 {
-						label = "user";
-						reg = <0x00400000 0x00b60000>;
-					};
-					partition@f60000 {
-						label = "env";
-						reg = <0x00f60000 0x00040000>;
-					};
-					partition@fa0000 {
-						label = "u-boot";
-						reg = <0x00fa0000 0x00060000>;
-					};
-				};
-			};
-
-			UART0: serial@f0000200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xf0000200 0x00000008>;
-				virtual-reg = <0xa0000200>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <115200>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			UART1: serial@f0000300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xf0000300 0x00000008>;
-				virtual-reg = <0xa0000300>;
-				clock-frequency = <0>;
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-
-			UART2: serial@f0000600 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xf0000600 0x00000008>;
-				virtual-reg = <0xa0000600>;
-				clock-frequency = <0>;
-				current-speed = <0>;
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x5 0x4>;
-			};
-
-			IIC0: i2c@f0000400 {
-				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <0xf0000400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			IIC1: i2c@f0000500 {
-				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <0xf0000500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x3 0x4>;
-			};
-
-			EMAC0: ethernet@f0000800 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-440spe", "ibm,emac4";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1c 0x4 0x1d 0x4>;
-				reg = <0xf0000800 0x00000074>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "gmii";
-				phy-map = <0x00000000>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCIX0: pci@c0ec00000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
-			primary;
-			large-inbound-windows;
-			enable-msi-hole;
-			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
-			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
-			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
-			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
-			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
-
-			/* Inbound 4GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
-
-			/* This drives busses 0 to 0xf */
-			bus-range = <0x0 0xf>;
-
-			/*
-			 * On Katmai, the following PCI-X interrupts signals
-			 * have to be enabled via jumpers (only INTA is
-			 * enabled per default):
-			 *
-			 * INTB: J3: 1-2
-			 * INTC: J2: 1-2
-			 * INTD: J1: 1-2
-			 */
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* IDSEL 1 */
-				0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
-				0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
-				0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
-				0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
-			>;
-		};
-
-		PCIE0: pciex@d00000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
-			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
-			dcr-reg = <0x100 0x020>;
-			sdr-base = <0x300>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
-
-			/* Inbound 4GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
-
-			/* This drives busses 0x10 to 0x1f */
-			bus-range = <0x10 0x1f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
-		};
-
-		PCIE1: pciex@d20000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
-			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
-			dcr-reg = <0x120 0x020>;
-			sdr-base = <0x340>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
-
-			/* Inbound 4GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
-
-			/* This drives busses 0x20 to 0x2f */
-			bus-range = <0x20 0x2f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
-		};
-
-		PCIE2: pciex@d40000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
-			primary;
-			port = <0x2>; /* port number */
-			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
-			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
-			dcr-reg = <0x140 0x020>;
-			sdr-base = <0x370>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
-
-			/* Inbound 4GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
-
-			/* This drives busses 0x30 to 0x3f */
-			bus-range = <0x30 0x3f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
-		};
-
-		MSI: ppc4xx-msi@400300000 {
-				compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
-				reg = < 0x4 0x00300000 0x100>;
-				sdr-base = <0x3B0>;
-				msi-data = <0x00000000>;
-				msi-mask = <0x44440000>;
-				interrupt-count = <3>;
-				interrupts =<0 1 2 3>;
-				interrupt-parent = <&UIC0>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &UIC0 0xC 1
-					1 &UIC0 0x0D 1
-					2 &UIC0 0x0E 1
-					3 &UIC0 0x0F 1>;
-		};
-
-		I2O: i2o@400100000 {
-			compatible = "ibm,i2o-440spe";
-			reg = <0x00000004 0x00100000 0x100>;
-			dcr-reg = <0x060 0x020>;
-		};
-
-		DMA0: dma0@400100100 {
-			compatible = "ibm,dma-440spe";
-			cell-index = <0>;
-			reg = <0x00000004 0x00100100 0x100>;
-			dcr-reg = <0x060 0x020>;
-			interrupt-parent = <&DMA0>;
-			interrupts = <0 1>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <
-				0 &UIC0 0x14 4
-				1 &UIC1 0x16 4>;
-		};
-
-		DMA1: dma1@400100200 {
-			compatible = "ibm,dma-440spe";
-			cell-index = <1>;
-			reg = <0x00000004 0x00100200 0x100>;
-			dcr-reg = <0x060 0x020>;
-			interrupt-parent = <&DMA1>;
-			interrupts = <0 1>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <
-				0 &UIC0 0x16 4
-				1 &UIC1 0x16 4>;
-		};
-
-		xor-accel@400200000 {
-			compatible = "amcc,xor-accelerator";
-			reg = <0x00000004 0x00200000 0x400>;
-			interrupt-parent = <&UIC1>;
-			interrupts = <0x1f 4>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@f0000200";
-	};
-};
diff --git a/src/powerpc/kilauea.dts b/src/powerpc/kilauea.dts
deleted file mode 100644
index 5ba7f01e2a29..000000000000
--- a/src/powerpc/kilauea.dts
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- * Device Tree Source for AMCC Kilauea (405EX)
- *
- * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "amcc,kilauea";
-	compatible = "amcc,kilauea";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EX";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>; /* 16 kB */
-			d-cache-size = <16384>; /* 16 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic-405ex", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	CPM0: cpm {
-		compatible = "ibm,cpm";
-		dcr-access-method = "native";
-		dcr-reg = <0x0b0 0x003>;
-		unused-units = <0x00000000>;
-		idle-doze = <0x02000000>;
-		standby = <0xe3e74800>;
-	};
-
-	plb {
-		compatible = "ibm,plb-405ex", "ibm,plb4";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
-			dcr-reg = <0x010 0x002>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <0x5 0x4	/* ECC DED Error */ 
-				      0x6 0x4>;	/* ECC SEC Error */ 
-		};
-
-		CRYPTO: crypto@ef700000 {
-			compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
-			reg = <0xef700000 0x80400>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <0x17 0x2>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405ex", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x80000000 0x80000000 0x10000000
-				  0xef600000 0xef600000 0x00a00000
-				  0xf0000000 0xf0000000 0x10000000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x001e0000>;
-					};
-					partition@1e0000 {
-						label = "dtb";
-						reg = <0x001e0000 0x00020000>;
-					};
-					partition@200000 {
-						label = "root";
-						reg = <0x00200000 0x00200000>;
-					};
-					partition@400000 {
-						label = "user";
-						reg = <0x00400000 0x03b60000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-
-				ndfc@1,0 {
-					compatible = "ibm,ndfc";
-					reg = <0x00000001 0x00000000 0x00002000>;
-					ccr = <0x00001000>;
-					bank-settings = <0x80002222>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					nand {
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						partition@0 {
-							label = "u-boot";
-							reg = <0x00000000 0x00100000>;
-						};
-						partition@100000 {
-							label = "user";
-							reg = <0x00000000 0x03f00000>;
-						};
-					};
-				};
-			};
-
-			UART0: serial@ef600200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600200 0x00000008>;
-				virtual-reg = <0xef600200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1a 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600400 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				rtc@68 {
-					compatible = "dallas,ds1338";
-					reg = <0x68>;
-				};
-
-				dtt@48 {
-					compatible = "dallas,ds1775";
-					reg = <0x48>;
-				};
-			};
-
-			IIC1: i2c@ef600500 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-			RGMII0: emac-rgmii@ef600b00 {
-				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <0xef600b00 0x00000104>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
-						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
-				reg = <0xef600900 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <0x1>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
-						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
-				reg = <0xef600a00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCIE0: pciex@0a0000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0xa0000000 0x20000000	/* Config space access */
-			       0xef000000 0x00001000>;	/* Registers */
-			dcr-reg = <0x040 0x020>;
-			sdr-base = <0x400>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
-				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0x00 to 0x3f */
-			bus-range = <0x0 0x3f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
-		};
-
-		PCIE1: pciex@0c0000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0xc0000000 0x20000000	/* Config space access */
-			       0xef001000 0x00001000>;	/* Registers */
-			dcr-reg = <0x060 0x020>;
-			sdr-base = <0x440>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
-				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0x40 to 0x7f */
-			bus-range = <0x40 0x7f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
-		};
-
-		MSI: ppc4xx-msi@C10000000 {
-			compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
-			reg = <0xEF620000 0x100>;
-			sdr-base = <0x4B0>;
-			msi-data = <0x00000000>;
-			msi-mask = <0x44440000>;
-			interrupt-count = <12>;
-			interrupts = <0 1 2 3 4 5 6 7 8 9 0xA 0xB 0xC 0xD>;
-			interrupt-parent = <&UIC2>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &UIC2 0x10 1
-					1 &UIC2 0x11 1
-					2 &UIC2 0x12 1
-					2 &UIC2 0x13 1
-					2 &UIC2 0x14 1
-					2 &UIC2 0x15 1
-					2 &UIC2 0x16 1
-					2 &UIC2 0x17 1
-					2 &UIC2 0x18 1
-					2 &UIC2 0x19 1
-					2 &UIC2 0x1A 1
-					2 &UIC2 0x1B 1
-					2 &UIC2 0x1C 1
-					3 &UIC2 0x1D 1>;
-		};
-	};
-};
diff --git a/src/powerpc/klondike.dts b/src/powerpc/klondike.dts
deleted file mode 100644
index 8c9429033618..000000000000
--- a/src/powerpc/klondike.dts
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * Device Tree for Klondike (APM8018X) board.
- *
- * Copyright (c) 2010, Applied Micro Circuits Corporation
- * Author: Tanmay Inamdar <tinamdar@apm.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "apm,klondike";
-	compatible = "apm,klondike";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,apm8018x";
-			reg = <0x00000000>;
-			clock-frequency = <300000000>; /* Filled in by U-Boot */
-			timebase-frequency = <300000000>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>; /* 16 kB */
-			d-cache-size = <16384>; /* 16 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x010>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x010>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x010>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC3: interrupt-controller3 {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x0f0 0x010>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	plb {
-		compatible = "ibm,plb4";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-apm8018x";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <16>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-parent = <&UIC1>;
-			interrupts = </*TXEOB*/   0x6 0x4
-					/*RXEOB*/ 0x7 0x4
-					/*SERR*/  0x1 0x4
-					/*TXDE*/  0x2 0x4
-					/*RXDE*/  0x3 0x4>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x20000000 0x20000000 0x30000000
-				  0x50000000 0x50000000 0x10000000
-				  0x60000000 0x60000000 0x10000000
-				  0xFE000000 0xFE000000 0x00010000>;
-			dcr-reg = <0x100 0x020>;
-			clock-frequency = <300000000>; /* Filled in by U-Boot */
-
-			RGMII0: emac-rgmii@400a2000 {
-				compatible = "ibm,rgmii";
-				reg = <0x400a2000 0x00000010>;
-				has-mdio;
-			};
-
-			TAH0: emac-tah@400a3000 {
-				compatible = "ibm,tah";
-				reg = <0x400a3000 0x100>;
-			};
-
-			TAH1: emac-tah@400a4000 {
-				compatible = "ibm,tah";
-				reg = <0x400a4000 0x100>;
-			};
-
-			EMAC0: ethernet@400a0000 {
-				compatible = "ibm,emac4", "ibm-emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
-				reg = <0x400a0000 0x00000100>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0x0>;
-				mal-rx-channel = <0x0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-address = <0x2>;
-				turbo = "no";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				tah-device = <&TAH0>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@400a1000 {
-				compatible = "ibm,emac4", "ibm-emac4sync";
-				status = "disabled";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
-				reg = <0x400a1000 0x00000100>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <8>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-address = <0x3>;
-				turbo = "no";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				tah-device = <&TAH1>;
-				tah-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-				mdio-device = <&EMAC0>;
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@50001000";
-	};
-};
diff --git a/src/powerpc/kmcoge4.dts b/src/powerpc/kmcoge4.dts
deleted file mode 100644
index 89b4119f3b19..000000000000
--- a/src/powerpc/kmcoge4.dts
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
- *
- * (C) Copyright 2014
- * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p2041si-pre.dtsi"
-
-/ {
-	model = "keymile,kmcoge4";
-	compatible = "keymile,kmcoge4", "keymile,kmp204x";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25fl256s1";
-				reg = <0>;
-				spi-max-frequency = <20000000>; /* input clock */
-			};
-
-			network_clock@1 {
-				compatible = "zarlink,zl30343";
-				reg = <1>;
-				spi-max-frequency = <8000000>;
-			};
-
-			flash@2 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "micron,m25p32";
-				reg = <2>;
-				spi-max-frequency = <15000000>;
-			};
-		};
-
-		i2c@119000 {
-			status = "disabled";
-		};
-
-		i2c@119100 {
-			status = "disabled";
-		};
-
-		usb0: usb@210000 {
-			status = "disabled";
-		};
-
-		usb1: usb@211000 {
-			status = "disabled";
-		};
-
-		sata@220000 {
-			status = "disabled";
-		};
-
-		sata@221000 {
-			status = "disabled";
-		};
-	};
-
-	rio: rapidio@ffe0c0000 {
-		status = "disabled";
-	};
-
-	lbc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xffa00000 0x00040000		/* LB 0 */
-			  1 0 0xf 0xfb000000 0x00010000		/* LB 1 */
-			  2 0 0xf 0xd0000000 0x10000000		/* LB 2 */
-			  3 0 0xf 0xe0000000 0x10000000>;	/* LB 3 */
-
-		nand@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0 0 0x40000>;
-		};
-
-		board-control@1,0 {
-			compatible = "keymile,qriox";
-			reg = <1 0 0x80>;
-		};
-
-		chassis-mgmt@3,0 {
-			compatible = "keymile,bfticu";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <3 0 0x100>;
-			interrupt-parent = <&mpic>;
-			interrupts = <6 1 0 0>;
-		};
-	};
-
-	pci0: pcie@ffe200000 {
-		reg = <0xf 0xfe200000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		status = "disabled";
-	};
-
-	pci2: pcie@ffe202000 {
-		reg = <0xf 0xfe202000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-};
-
-/include/ "fsl/p2041si-post.dtsi"
diff --git a/src/powerpc/kmeter1.dts b/src/powerpc/kmeter1.dts
deleted file mode 100644
index 983aee185793..000000000000
--- a/src/powerpc/kmeter1.dts
+++ /dev/null
@@ -1,532 +0,0 @@
-/*
- * Keymile KMETER1 Device Tree Source
- *
- * 2008-2011 DENX Software Engineering GmbH
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "KMETER1";
-	compatible = "keymile,KMETER1";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet_piggy2;
-		ethernet1 = &enet_estar1;
-		ethernet2 = &enet_estar2;
-		ethernet3 = &enet_eth1;
-		ethernet4 = &enet_eth2;
-		ethernet5 = &enet_eth3;
-		ethernet6 = &enet_eth4;
-		serial0 = &serial0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8360@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	/* Filled in by U-Boot */
-			bus-frequency = <0>;	/* Filled in by U-Boot */
-			clock-frequency = <0>;	/* Filled in by U-Boot */
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0>;	/* Filled in by U-Boot */
-	};
-
-	soc8360@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8360-immr", "simple-bus";
-		ranges = <0x0 0xe0000000 0x00200000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;	/* Filled in by U-Boot */
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl,mpc8313-i2c","fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			clock-frequency = <400000>;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <264000000>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		ipic: pic@700 {
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			compatible = "fsl,pq2pro-pic", "fsl,ipic";
-			interrupt-controller;
-			reg = <0x700 0x100>;
-		};
-
-		par_io@1400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1400 0x100>;
-			compatible = "fsl,mpc8360-par_io";
-			num-ports = <7>;
-
-			qe_pio_c: gpio-controller@30 {
-				#gpio-cells = <2>;
-				compatible = "fsl,mpc8360-qe-pario-bank",
-					     "fsl,mpc8323-qe-pario-bank";
-				reg = <0x1430 0x18>;
-				gpio-controller;
-			};
-			pio_ucc1: ucc_pin@0 {
-				reg = <0>;
-
-				pio-map = <
-					/* port pin dir open_drain assignment has_irq */
-					0   1  3  0  2  0	/* MDIO   */
-					0   2  1  0  1  0	/* MDC    */
-
-					0   3  1  0  1  0	/* TxD0   */
-					0   4  1  0  1  0	/* TxD1   */
-					0   5  1  0  1  0	/* TxD2   */
-					0   6  1  0  1  0	/* TxD3   */
-					0   9  2  0  1  0	/* RxD0   */
-					0  10  2  0  1  0	/* RxD1   */
-					0  11  2  0  1  0	/* RxD2   */
-					0  12  2  0  1  0	/* RxD3   */
-					0   7  1  0  1  0	/* TX_EN  */
-					0   8  1  0  1  0	/* TX_ER  */
-					0  15  2  0  1  0	/* RX_DV  */
-					0  16  2  0  1  0	/* RX_ER  */
-					0   0  2  0  1  0	/* RX_CLK */
-					2   9  1  0  3  0	/* GTX_CLK - CLK10 */
-					2   8  2  0  1  0	/* GTX125  - CLK9  */
-				>;
-			};
-
-			pio_ucc2: ucc_pin@1 {
-				reg = <1>;
-
-				pio-map = <
-					/* port pin dir open_drain assignment has_irq */
-					0   1  3  0  2  0	/* MDIO   */
-					0   2  1  0  1  0	/* MDC    */
-
-					0  17  1  0  1  0	/* TxD0   */
-					0  18  1  0  1  0	/* TxD1   */
-					0  19  1  0  1  0	/* TxD2   */
-					0  20  1  0  1  0	/* TxD3   */
-					0  23  2  0  1  0	/* RxD0   */
-					0  24  2  0  1  0	/* RxD1   */
-					0  25  2  0  1  0	/* RxD2   */
-					0  26  2  0  1  0	/* RxD3   */
-					0  21  1  0  1  0	/* TX_EN  */
-					0  22  1  0  1  0	/* TX_ER  */
-					0  29  2  0  1  0	/* RX_DV  */
-					0  30  2  0  1  0	/* RX_ER  */
-					0  31  2  0  1  0	/* RX_CLK */
-					2  2   1  0  2  0	/* GTX_CLK - CLK3  */
-					2  3   2  0  1  0	/* GTX125  - CLK4  */
-				>;
-			};
-
-			pio_ucc4: ucc_pin@3 {
-				reg = <3>;
-
-				pio-map = <
-					/* port pin dir open_drain assignment has_irq */
-					0   1  3  0  2  0	/* MDIO */
-					0   2  1  0  1  0	/* MDC  */
-
-					1  14  1  0  1  0	/* TxD0   (PB14, out, f1) */
-					1  15  1  0  1  0	/* TxD1   (PB15, out, f1) */
-					1  20  2  0  1  0	/* RxD0   (PB20, in,  f1) */
-					1  21  2  0  1  0	/* RxD1   (PB21, in,  f1) */
-					1  18  1  0  1  0	/* TX_EN  (PB18, out, f1) */
-					1  26  2  0  1  0	/* RX_DV  (PB26, in,  f1) */
-					1  27  2  0  1  0	/* RX_ER  (PB27, in,  f1) */
-
-					2  16  2  0  1  0	/* UCC4_RMII_CLK (CLK17) */
-				>;
-			};
-
-			pio_ucc5: ucc_pin@4 {
-				reg = <4>;
-
-				pio-map = <
-					/* port pin dir open_drain assignment has_irq */
-					0   1  3  0  2  0	/* MDIO */
-					0   2  1  0  1  0	/* MDC  */
-
-					3   0  1  0  1  0	/* TxD0  (PD0,  out, f1) */
-					3   1  1  0  1  0	/* TxD1  (PD1,  out, f1) */
-					3   6  2  0  1  0	/* RxD0  (PD6,   in, f1) */
-					3   7  2  0  1  0	/* RxD1  (PD7,   in, f1) */
-					3   4  1  0  1  0	/* TX_EN (PD4,  out, f1) */
-					3  12  2  0  1  0	/* RX_DV (PD12,  in, f1) */
-					3  13  2  0  1  0	/* RX_ER (PD13,  in, f1) */
-				>;
-			};
-
-			pio_ucc6: ucc_pin@5 {
-				reg = <5>;
-
-				pio-map = <
-					/* port pin dir open_drain assignment has_irq */
-					0   1  3  0  2  0	/* MDIO */
-					0   2  1  0  1  0	/* MDC  */
-
-					3  14  1  0  1  0	/* TxD0   (PD14, out, f1) */
-					3  15  1  0  1  0	/* TxD1   (PD15, out, f1) */
-					3  20  2  0  1  0	/* RxD0   (PD20, in,  f1) */
-					3  21  2  0  1  0	/* RxD1   (PD21, in,  f1) */
-					3  18  1  0  1  0	/* TX_EN  (PD18, out, f1) */
-					3  26  2  0  1  0	/* RX_DV  (PD26, in,  f1) */
-					3  27  2  0  1  0	/* RX_ER  (PD27, in,  f1) */
-				>;
-			};
-
-			pio_ucc7: ucc_pin@6 {
-				reg = <6>;
-
-				pio-map = <
-					/* port pin dir open_drain assignment has_irq */
-					0   1  3  0  2  0	/* MDIO */
-					0   2  1  0  1  0	/* MDC  */
-
-					4   0  1  0  1  0	/* TxD0   (PE0,  out, f1) */
-					4   1  1  0  1  0	/* TxD1   (PE1,  out, f1) */
-					4   6  2  0  1  0	/* RxD0   (PE6,   in, f1) */
-					4   7  2  0  1  0	/* RxD1   (PE7,   in, f1) */
-					4   4  1  0  1  0	/* TX_EN  (PE4,  out, f1) */
-					4  12  2  0  1  0	/* RX_DV  (PE12,  in, f1) */
-					4  13  2  0  1  0	/* RX_ER  (PE13,  in, f1) */
-				>;
-			};
-
-			pio_ucc8: ucc_pin@7 {
-				reg = <7>;
-
-				pio-map = <
-					/* port pin dir open_drain assignment has_irq */
-					0   1  3  0  2  0	/* MDIO */
-					0   2  1  0  1  0	/* MDC  */
-
-					4  14  1  0  2  0	/* TxD0   (PE14, out, f2) */
-					4  15  1  0  1  0	/* TxD1   (PE15, out, f1) */
-					4  20  2  0  1  0	/* RxD0   (PE20, in,  f1) */
-					4  21  2  0  1  0	/* RxD1   (PE21, in,  f1) */
-					4  18  1  0  1  0	/* TX_EN  (PE18, out, f1) */
-					4  26  2  0  1  0	/* RX_DV  (PE26, in,  f1) */
-					4  27  2  0  1  0	/* RX_ER  (PE27, in,  f1) */
-
-					2  15  2  0  1  0	/* UCCx_RMII_CLK (CLK16) */
-				>;
-			};
-
-		};
-
-		qe@100000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,qe";
-			ranges = <0x0 0x100000 0x100000>;
-			reg = <0x100000 0x480>;
-			clock-frequency = <0>;	/* Filled in by U-Boot */
-			brg-frequency = <0>;	/* Filled in by U-Boot */
-			bus-frequency = <0>;	/* Filled in by U-Boot */
-
-			muram@10000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,qe-muram", "fsl,cpm-muram";
-				ranges = <0x0 0x00010000 0x0000c000>;
-
-				data-only@0 {
-					compatible = "fsl,qe-muram-data",
-						     "fsl,cpm-muram-data";
-					reg = <0x0 0xc000>;
-				};
-			};
-
-			/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
-			enet_estar1: ucc@2000 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <1>;
-				reg = <0x2000 0x200>;
-				interrupts = <32>;
-				interrupt-parent = <&qeic>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				rx-clock-name = "none";
-				tx-clock-name = "clk9";
-				phy-handle = <&phy_estar1>;
-				phy-connection-type = "rgmii-id";
-				pio-handle = <&pio_ucc1>;
-			};
-
-			/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
-			enet_estar2: ucc@3000 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <2>;
-				reg = <0x3000 0x200>;
-				interrupts = <33>;
-				interrupt-parent = <&qeic>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				rx-clock-name = "none";
-				tx-clock-name = "clk4";
-				phy-handle = <&phy_estar2>;
-				phy-connection-type = "rgmii-id";
-				pio-handle = <&pio_ucc2>;
-			};
-
-			/* Piggy2 (UCC4, MDIO 0x00, RMII) */
-			enet_piggy2: ucc@3200 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <4>;
-				reg = <0x3200 0x200>;
-				interrupts = <35>;
-				interrupt-parent = <&qeic>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				rx-clock-name = "none";
-				tx-clock-name = "clk17";
-				phy-handle = <&phy_piggy2>;
-				phy-connection-type = "rmii";
-				pio-handle = <&pio_ucc4>;
-			};
-
-			/* Eth-1 (UCC5, MDIO 0x08, RMII) */
-			enet_eth1: ucc@2400 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <5>;
-				reg = <0x2400 0x200>;
-				interrupts = <40>;
-				interrupt-parent = <&qeic>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				rx-clock-name = "none";
-				tx-clock-name = "clk16";
-				phy-handle = <&phy_eth1>;
-				phy-connection-type = "rmii";
-				pio-handle = <&pio_ucc5>;
-			};
-
-			/* Eth-2 (UCC6, MDIO 0x09, RMII) */
-			enet_eth2: ucc@3400 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <6>;
-				reg = <0x3400 0x200>;
-				interrupts = <41>;
-				interrupt-parent = <&qeic>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				rx-clock-name = "none";
-				tx-clock-name = "clk16";
-				phy-handle = <&phy_eth2>;
-				phy-connection-type = "rmii";
-				pio-handle = <&pio_ucc6>;
-			};
-
-			/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
-			enet_eth3: ucc@2600 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <7>;
-				reg = <0x2600 0x200>;
-				interrupts = <42>;
-				interrupt-parent = <&qeic>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				rx-clock-name = "none";
-				tx-clock-name = "clk16";
-				phy-handle = <&phy_eth3>;
-				phy-connection-type = "rmii";
-				pio-handle = <&pio_ucc7>;
-			};
-
-			/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
-			enet_eth4: ucc@3600 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <8>;
-				reg = <0x3600 0x200>;
-				interrupts = <43>;
-				interrupt-parent = <&qeic>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				rx-clock-name = "none";
-				tx-clock-name = "clk16";
-				phy-handle = <&phy_eth4>;
-				phy-connection-type = "rmii";
-				pio-handle = <&pio_ucc8>;
-			};
-
-			mdio@3320 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x3320 0x18>;
-				compatible = "fsl,ucc-mdio";
-
-				/* Piggy2 (UCC4, MDIO 0x00, RMII) */
-				phy_piggy2: ethernet-phy@00 {
-					reg = <0x0>;
-				};
-
-				/* Eth-1 (UCC5, MDIO 0x08, RMII) */
-				phy_eth1: ethernet-phy@08 {
-					reg = <0x08>;
-				};
-
-				/* Eth-2 (UCC6, MDIO 0x09, RMII) */
-				phy_eth2: ethernet-phy@09 {
-					reg = <0x09>;
-				};
-
-				/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
-				phy_eth3: ethernet-phy@0a {
-					reg = <0x0a>;
-				};
-
-				/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
-				phy_eth4: ethernet-phy@0b {
-					reg = <0x0b>;
-				};
-
-				/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
-				phy_estar1: ethernet-phy@10 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x10>;
-				};
-
-				/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
-				phy_estar2: ethernet-phy@11 {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x11>;
-				};
-			};
-
-			qeic: interrupt-controller@80 {
-				interrupt-controller;
-				compatible = "fsl,qe-ic";
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-				reg = <0x80 0x80>;
-				big-endian;
-				interrupts = <
-					32 0x8
-					33 0x8
-					34 0x8
-					35 0x8
-					40 0x8
-					41 0x8
-					42 0x8
-					43 0x8
-				>;
-				interrupt-parent = <&ipic>;
-			};
-		};
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
-			     "simple-bus";
-		reg = <0xe0005000 0xd8>;
-		ranges = <0 0 0xf0000000 0x04000000	/* LB 0 */
-			  1 0 0xe8000000 0x01000000	/* LB 1 */
-			  3 0 0xa0000000 0x10000000>;	/* LB 3 */
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x04000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			partition@0 { /* 768KB */
-				label = "u-boot";
-				reg = <0 0xC0000>;
-			};
-			partition@c0000 { /* 128KB */
-				label = "env";
-				reg = <0xC0000 0x20000>;
-			};
-			partition@e0000 { /* 128KB */
-				label = "envred";
-				reg = <0xE0000 0x20000>;
-			};
-			partition@100000 { /* 64512KB */
-				label = "ubi0";
-				reg = <0x100000 0x3F00000>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/ksi8560.dts b/src/powerpc/ksi8560.dts
deleted file mode 100644
index 5d68236e7c3c..000000000000
--- a/src/powerpc/ksi8560.dts
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * Device Tree Source for Emerson KSI8560
- *
- * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
- *
- * Based on mpc8560ads.dts
- *
- * 2008 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-/dts-v1/;
-
-/ {
-	model = "KSI8560";
-	compatible = "emerson,KSI8560";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8560@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x8000>;		/* L1, 32K */
-			i-cache-size = <0x8000>;		/* L1, 32K */
-			timebase-frequency = <0>;		/* From U-boot */
-			bus-frequency = <0>;			/* From U-boot */
-			clock-frequency = <0>;			/* From U-boot */
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;			/* Fixed by bootwrapper */
-	};
-
-	soc@fdf00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x00000000 0xfdf00000 0x00100000>;
-		bus-frequency = <0>;				/* Fixed by bootwrapper */
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8540-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <0x12 0x2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8540-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <0x20>;		/* 32 bytes */
-			cache-size = <0x40000>;			/* L2, 256K */
-			interrupt-parent = <&mpic>;
-			interrupts = <0x10 0x2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			/* Mac address filled in by bootwrapper */
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&PHY1>;
-
-			mdio@520 {					/* For TSECs */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				PHY1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					reg = <0x1>;
-				};
-
-				PHY2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					reg = <0x2>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			/* Mac address filled in by bootwrapper */
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&PHY2>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		mpic: pic@40000 {
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0x40000 0x40000>;
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x4000 0x9000 0x2000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8560-brg",
-					     "fsl,cpm2-brg",
-					     "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-				clock-frequency = <165000000>;	/* 166MHz */
-			};
-
-			CPMPIC: pic@90c00 {
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupt-controller;
-				interrupts = <0x2e 0x2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
-			};
-
-			serial@91a00 {
-				device_type = "serial";
-				compatible = "fsl,mpc8560-scc-uart",
-					     "fsl,cpm2-scc-uart";
-				reg = <0x91a00 0x20 0x88000 0x100>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x800000>;
-				current-speed = <0x1c200>;
-				interrupts = <0x28 0x8>;
-				interrupt-parent = <&CPMPIC>;
-			};
-
-			serial@91a20 {
-				device_type = "serial";
-				compatible = "fsl,mpc8560-scc-uart",
-					     "fsl,cpm2-scc-uart";
-				reg = <0x91a20 0x20 0x88100 0x100>;
-				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0x4a00000>;
-				current-speed = <0x1c200>;
-				interrupts = <0x29 0x8>;
-				interrupt-parent = <&CPMPIC>;
-			};
-
-			mdio@90d00 {				/* For FCCs */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,cpm2-mdio-bitbang";
-				reg = <0x90d00 0x14>;
-				fsl,mdio-pin = <24>;
-				fsl,mdc-pin = <25>;
-
-				PHY0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					reg = <0x0>;
-				};
-			};
-
-			enet2: ethernet@91300 {
-				device_type = "network";
-				compatible = "fsl,mpc8560-fcc-enet",
-					     "fsl,cpm2-fcc-enet";
-				reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>;
-				/* Mac address filled in by bootwrapper */
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <0x12000300>;
-				interrupts = <0x20 0x8>;
-				interrupt-parent = <&CPMPIC>;
-				phy-handle = <&PHY0>;
-			};
-		};
-	};
-
-	localbus@fdf05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8560-localbus", "simple-bus";
-		reg = <0xfdf05000 0x68>;
-
-		ranges = <0x0 0x0 0xe0000000 0x00800000
-			  0x4 0x0 0xe8080000 0x00080000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "jedec-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <0x2>;
-
-			partition@0 {
-				label = "Primary Kernel";
-				reg = <0x0 0x180000>;
-			};
-			partition@180000 {
-				label = "Primary Filesystem";
-				reg = <0x180000 0x580000>;
-			};
-			partition@700000 {
-				label = "Monitor";
-				reg = <0x300000 0x100000>;
-				read-only;
-			};
-		};
-
-		cpld@4,0 {
-			compatible = "emerson,KSI8560-cpld";
-			reg = <0x4 0x0 0x80000>;
-		};
-	};
-
-
-	chosen {
-		linux,stdout-path = "/soc/cpm/serial@91a00";
-	};
-};
diff --git a/src/powerpc/kuroboxHD.dts b/src/powerpc/kuroboxHD.dts
deleted file mode 100644
index 0a4545159e80..000000000000
--- a/src/powerpc/kuroboxHD.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Device Tree Souce for Buffalo KuroboxHD
- *
- * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use
- * the default configuration linkstation_defconfig.
- *
- * Based on sandpoint.dts
- *
- * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
-
-XXXX add flash parts, rtc, ??
-
- */
-
-/dts-v1/;
-
-/ {
-	model = "KuroboxHD";
-	compatible = "linkstation";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,603e { /* Really 8241 */
-			device_type = "cpu";
-			reg = <0x0>;
-			clock-frequency = <200000000>;	/* Fixed by bootloader */
-			timebase-frequency = <24391680>; /* Fixed by bootloader */
-			bus-frequency = <0>;		/* Fixed by bootloader */
-			/* Following required by dtc but not used */
-			i-cache-size = <0x4000>;
-			d-cache-size = <0x4000>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "mpc10x";
-		store-gathering = <0>; /* 0 == off, !0 == on */
-		reg = <0x80000000 0x100000>;
-		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
-			  0xfc000000 0xfc000000 0x100000	/* EUMB */
-			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
-			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
-			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
-
-		i2c@80003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x80003000 0x1000>;
-			interrupts = <5 2>;
-			interrupt-parent = <&mpic>;
-
-			rtc@32 {
-				compatible = "ricoh,rs5c372a";
-				reg = <0x32>;
-			};
-		};
-
-		serial0: serial@80004500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x80004500 0x8>;
-			clock-frequency = <97553800>;
-			current-speed = <9600>;
-			interrupts = <9 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@80004600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x80004600 0x8>;
-			clock-frequency = <97553800>;
-			current-speed = <57600>;
-			interrupts = <10 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: interrupt-controller@80040000 {
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			device_type = "open-pic";
-			compatible = "chrp,open-pic";
-			interrupt-controller;
-			reg = <0x80040000 0x40000>;
-		};
-
-		pci0: pci@fec00000 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			compatible = "mpc10x-pci";
-			reg = <0xfec00000 0x400000>;
-			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
-				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
-			bus-range = <0 255>;
-			clock-frequency = <133333333>;
-			interrupt-parent = <&mpic>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* IDSEL 11 - IRQ0 ETH */
-				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
-				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
-				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
-				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
-				/* IDSEL 12 - IRQ1 IDE0 */
-				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
-				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
-				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
-				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
-				/* IDSEL 14 - IRQ3 USB2.0 */
-				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
-				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
-				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
-				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		};
-	};
-};
diff --git a/src/powerpc/kuroboxHG.dts b/src/powerpc/kuroboxHG.dts
deleted file mode 100644
index 0e758b347cdb..000000000000
--- a/src/powerpc/kuroboxHG.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Device Tree Souce for Buffalo KuroboxHG
- *
- * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use
- * the default configuration linkstation_defconfig.
- *
- * Based on sandpoint.dts
- *
- * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
-
-XXXX add flash parts, rtc, ??
-
- */
-
-/dts-v1/;
-
-/ {
-	model = "KuroboxHG";
-	compatible = "linkstation";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,603e { /* Really 8241 */
-			device_type = "cpu";
-			reg = <0x0>;
-			clock-frequency = <266000000>;	/* Fixed by bootloader */
-			timebase-frequency = <32522240>; /* Fixed by bootloader */
-			bus-frequency = <0>;		/* Fixed by bootloader */
-			/* Following required by dtc but not used */
-			i-cache-size = <0x4000>;
-			d-cache-size = <0x4000>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "mpc10x";
-		store-gathering = <0>; /* 0 == off, !0 == on */
-		reg = <0x80000000 0x100000>;
-		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
-			  0xfc000000 0xfc000000 0x100000	/* EUMB */
-			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
-			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
-			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
-
-		i2c@80003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x80003000 0x1000>;
-			interrupts = <5 2>;
-			interrupt-parent = <&mpic>;
-
-			rtc@32 {
-				compatible = "ricoh,rs5c372a";
-				reg = <0x32>;
-			};
-		};
-
-		serial0: serial@80004500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x80004500 0x8>;
-			clock-frequency = <130041000>;
-			current-speed = <9600>;
-			interrupts = <9 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@80004600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x80004600 0x8>;
-			clock-frequency = <130041000>;
-			current-speed = <57600>;
-			interrupts = <10 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: interrupt-controller@80040000 {
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			device_type = "open-pic";
-			compatible = "chrp,open-pic";
-			interrupt-controller;
-			reg = <0x80040000 0x40000>;
-		};
-
-		pci0: pci@fec00000 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			compatible = "mpc10x-pci";
-			reg = <0xfec00000 0x400000>;
-			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
-				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
-			bus-range = <0 255>;
-			clock-frequency = <133333333>;
-			interrupt-parent = <&mpic>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* IDSEL 11 - IRQ0 ETH */
-				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
-				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
-				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
-				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
-				/* IDSEL 12 - IRQ1 IDE0 */
-				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
-				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
-				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
-				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
-				/* IDSEL 14 - IRQ3 USB2.0 */
-				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
-				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
-				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
-				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		};
-	};
-};
diff --git a/src/powerpc/lite5200.dts b/src/powerpc/lite5200.dts
deleted file mode 100644
index 179a1785d645..000000000000
--- a/src/powerpc/lite5200.dts
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * Lite5200 board Device Tree Source
- *
- * Copyright 2006-2007 Secret Lab Technologies Ltd.
- * Grant Likely <grant.likely@secretlab.ca>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "fsl,lite5200";
-	compatible = "fsl,lite5200";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
-
-	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
-		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
-			fsl,has-wdt;
-		};
-
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
-		};
-
-		timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-		};
-
-		timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio@b00 {
-			compatible = "fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio@c00 {
-			compatible = "fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			compatible = "fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
-		};
-
-		serial@2000 {		// PSC1
-			compatible = "fsl,mpc5200-psc-uart";
-			cell-index = <0>;
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
-		};
-
-		// PSC2 in ac97 mode example
-		//ac97@2200 {		// PSC2
-		//	compatible = "fsl,mpc5200-psc-ac97";
-		//	cell-index = <1>;
-		//	reg = <0x2200 0x100>;
-		//	interrupts = <2 2 0>;
-		//};
-
-		// PSC3 in CODEC mode example
-		//i2s@2400 {		// PSC3
-		//	compatible = "fsl,mpc5200-psc-i2s";
-		//	cell-index = <2>;
-		//	reg = <0x2400 0x100>;
-		//	interrupts = <2 3 0>;
-		//};
-
-		// PSC4 in uart mode example
-		//serial@2600 {		// PSC4
-		//	compatible = "fsl,mpc5200-psc-uart";
-		//	cell-index = <3>;
-		//	reg = <0x2600 0x100>;
-		//	interrupts = <2 11 0>;
-		//};
-
-		// PSC5 in uart mode example
-		//serial@2800 {		// PSC5
-		//	compatible = "fsl,mpc5200-psc-uart";
-		//	cell-index = <4>;
-		//	reg = <0x2800 0x100>;
-		//	interrupts = <2 12 0>;
-		//};
-
-		// PSC6 in spi mode example
-		//spi@2c00 {		// PSC6
-		//	compatible = "fsl,mpc5200-psc-spi";
-		//	cell-index = <5>;
-		//	reg = <0x2c00 0x100>;
-		//	interrupts = <2 4 0>;
-		//};
-
-		ethernet@3000 {
-			compatible = "fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		ata@3a00 {
-			compatible = "fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
-		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
-	};
-
-	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
-				 0xc000 0 0 2 &mpc5200_pic 0 0 3
-				 0xc000 0 0 3 &mpc5200_pic 0 0 3
-				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
-	};
-
-	localbus {
-		compatible = "fsl,mpc5200-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		ranges = <0 0 0xff000000 0x01000000>;
-
-		flash@0,0 {
-			compatible = "amd,am29lv652d", "cfi-flash";
-			reg = <0 0 0x01000000>;
-			bank-width = <1>;
-		};
-	};
-};
diff --git a/src/powerpc/lite5200b.dts b/src/powerpc/lite5200b.dts
deleted file mode 100644
index 5abb46c5cc95..000000000000
--- a/src/powerpc/lite5200b.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Lite5200B board Device Tree Source
- *
- * Copyright 2006-2007 Secret Lab Technologies Ltd.
- * Grant Likely <grant.likely@secretlab.ca>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 { fsl,has-wdt; };
-&gpt2 { gpio-controller; };
-&gpt3 { gpio-controller; };
-
-/ {
-	model = "fsl,lite5200b";
-	compatible = "fsl,lite5200b";
-
-	leds {
-		compatible = "gpio-leds";
-		tmr2 {
-			gpios = <&gpt2 0 1>;
-		};
-		tmr3 {
-			gpios = <&gpt3 0 1>;
-			linux,default-trigger = "heartbeat";
-		};
-		led1 { gpios = <&gpio_wkup 2 1>; };
-		led2 { gpios = <&gpio_simple 3 1>; };
-		led3 { gpios = <&gpio_wkup 3 1>; };
-		led4 { gpios = <&gpio_simple 2 1>; };
-	};
-
-	memory {
-		reg = <0x00000000 0x10000000>;	// 256MB
-	};
-
-	soc5200@f0000000 {
-		psc@2000 {		// PSC1
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <0>;
-		};
-
-		psc@2200 {		// PSC2
-			status = "disabled";
-		};
-
-		psc@2400 {		// PSC3
-			status = "disabled";
-		};
-
-		psc@2600 {		// PSC4
-			status = "disabled";
-		};
-
-		psc@2800 {		// PSC5
-			status = "disabled";
-		};
-
-		psc@2c00 {		// PSC6
-			status = "disabled";
-		};
-
-		// PSC2 in ac97 mode example
-		//ac97@2200 {		// PSC2
-		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
-		//	cell-index = <1>;
-		//};
-
-		// PSC3 in CODEC mode example
-		//i2s@2400 {		// PSC3
-		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
-		//	cell-index = <2>;
-		//};
-
-		// PSC6 in spi mode example
-		//spi@2c00 {		// PSC6
-		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
-		//	cell-index = <5>;
-		//};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		i2c@3d40 {
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
-	};
-
-	pci@f0000d00 {
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
-				 0xc000 0 0 2 &mpc5200_pic 1 1 3
-				 0xc000 0 0 3 &mpc5200_pic 1 2 3
-				 0xc000 0 0 4 &mpc5200_pic 1 3 3
-
-				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
-				 0xc800 0 0 2 &mpc5200_pic 1 2 3
-				 0xc800 0 0 3 &mpc5200_pic 1 3 3
-				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
-	};
-
-	localbus {
-		ranges = <0 0 0xfe000000 0x02000000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <1>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			partition@0 {
-				label = "kernel";
-				reg = <0x00000000 0x00200000>;
-			};
-			partition@200000 {
-				label = "rootfs";
-				reg = <0x00200000 0x01d00000>;
-			};
-			partition@1f00000 {
-				label = "u-boot";
-				reg = <0x01f00000 0x00060000>;
-			};
-			partition@1f60000 {
-				label = "u-boot-env";
-				reg = <0x01f60000 0x00020000>;
-			};
-			partition@1f80000 {
-				label = "dtb";
-				reg = <0x01f80000 0x00080000>;
-			};
-		};
-	};
-
-};
diff --git a/src/powerpc/makalu.dts b/src/powerpc/makalu.dts
deleted file mode 100644
index 63d48b632c84..000000000000
--- a/src/powerpc/makalu.dts
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * Device Tree Source for AMCC Makalu (405EX)
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "amcc,makalu";
-	compatible = "amcc,makalu";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EX";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>; /* 16 kB */
-			d-cache-size = <16384>; /* 16 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic-405ex", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	plb {
-		compatible = "ibm,plb-405ex", "ibm,plb4";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
-			dcr-reg = <0x010 0x002>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <0x5 0x4 /* ECC DED Error */
-			              0x6 0x4 /* ECC SEC Error */ >;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405ex", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x80000000 0x80000000 0x10000000
-				  0xef600000 0xef600000 0x00a00000
-				  0xf0000000 0xf0000000 0x10000000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x00200000>;
-					};
-					partition@200000 {
-						label = "root";
-						reg = <0x00200000 0x00200000>;
-					};
-					partition@400000 {
-						label = "user";
-						reg = <0x00400000 0x03b60000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-			};
-
-			UART0: serial@ef600200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600200 0x00000008>;
-				virtual-reg = <0xef600200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1a 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600400 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			IIC1: i2c@ef600500 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-
-			RGMII0: emac-rgmii@ef600b00 {
-				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <0xef600b00 0x00000104>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
-						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
-				reg = <0xef600900 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x0000003f>;	/* Start at 6 */
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <0x1>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
-						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
-				reg = <0xef600a00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-                                rx-fifo-size-gige = <16384>;
-                                tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCIE0: pciex@0a0000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0xa0000000 0x20000000	/* Config space access */
-			       0xef000000 0x00001000>;	/* Registers */
-			dcr-reg = <0x040 0x020>;
-			sdr-base = <0x400>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
-				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0x00 to 0x3f */
-			bus-range = <0x0 0x3f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
-		};
-
-		PCIE1: pciex@0c0000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0xc0000000 0x20000000	/* Config space access */
-			       0xef001000 0x00001000>;	/* Registers */
-			dcr-reg = <0x060 0x020>;
-			sdr-base = <0x440>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
-				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 0x40 to 0x7f */
-			bus-range = <0x40 0x7f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
-		};
-	};
-};
diff --git a/src/powerpc/media5200.dts b/src/powerpc/media5200.dts
deleted file mode 100644
index b5413cb85f13..000000000000
--- a/src/powerpc/media5200.dts
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Freescale Media5200 board Device Tree Source
- *
- * Copyright 2009 Secret Lab Technologies Ltd.
- * Grant Likely <grant.likely@secretlab.ca>
- * Steven Cavanagh <scavanagh@secretlab.ca>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 { fsl,has-wdt; };
-
-/ {
-	model = "fsl,media5200";
-	compatible = "fsl,media5200";
-
-	aliases {
-		console = &console;
-		ethernet0 = &eth0;
-	};
-
-	chosen {
-		linux,stdout-path = &console;
-	};
-
-	cpus {
-		PowerPC,5200@0 {
-			timebase-frequency = <33000000>;	// 33 MHz, these were configured by U-Boot
-			bus-frequency = <132000000>;		// 132 MHz
-			clock-frequency = <396000000>;		// 396 MHz
-		};
-	};
-
-	memory {
-		reg = <0x00000000 0x08000000>;	// 128MB RAM
-	};
-
-	soc5200@f0000000 {
-		bus-frequency = <132000000>;// 132 MHz
-
-		psc@2000 {	// PSC1
-			status = "disabled";
-		};
-
-		psc@2200 {	// PSC2
-			status = "disabled";
-		};
-
-		psc@2400 {	// PSC3
-			status = "disabled";
-		};
-
-		psc@2600 {	// PSC4
-			status = "disabled";
-		};
-
-		psc@2800 {	// PSC5
-			status = "disabled";
-		};
-
-		// PSC6 in uart mode
-		console: psc@2c00 {		// PSC6
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		usb@1000 {
-			reg = <0x1000 0x100>;
-		};
-	};
-
-	pci@f0000d00 {
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
-				 0xc000 0 0 2 &media5200_fpga 0 3
-				 0xc000 0 0 3 &media5200_fpga 0 4
-				 0xc000 0 0 4 &media5200_fpga 0 5
-
-				 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
-				 0xc800 0 0 2 &media5200_fpga 0 4
-				 0xc800 0 0 3 &media5200_fpga 0 5
-				 0xc800 0 0 4 &media5200_fpga 0 2
-
-				 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
-				 0xd000 0 0 2 &media5200_fpga 0 5
-
-				 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
-				>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
-		interrupt-parent = <&mpc5200_pic>;
-	};
-
-	localbus {
-		ranges = < 0 0 0xfc000000 0x02000000
-			   1 0 0xfe000000 0x02000000
-			   2 0 0xf0010000 0x00010000
-			   3 0 0xf0020000 0x00010000 >;
-		flash@0,0 {
-			compatible = "amd,am29lv28ml", "cfi-flash";
-			reg = <0 0x0 0x2000000>;                // 32 MB
-			bank-width = <4>;                       // Width in bytes of the flash bank
-			device-width = <2>;                     // Two devices on each bank
-		};
-
-		flash@1,0 {
-			compatible = "amd,am29lv28ml", "cfi-flash";
-			reg = <1 0 0x2000000>;                  // 32 MB
-			bank-width = <4>;                       // Width in bytes of the flash bank
-			device-width = <2>;                     // Two devices on each bank
-		};
-
-		media5200_fpga: fpga@2,0 {
-			compatible = "fsl,media5200-fpga";
-			interrupt-controller;
-			#interrupt-cells = <2>;	// 0:bank 1:id; no type field
-			reg = <2 0 0x10000>;
-
-			interrupt-parent = <&mpc5200_pic>;
-			interrupts = <0 0 3	// IRQ bank 0
-			              1 1 3>;	// IRQ bank 1
-		};
-
-		uart@3,0 {
-			compatible = "ti,tl16c752bpt";
-			reg = <3 0 0x10000>;
-			interrupt-parent = <&media5200_fpga>;
-			interrupts = <0 0  0 1>; // 2 irqs
-		};
-	};
-};
diff --git a/src/powerpc/mgcoge.dts b/src/powerpc/mgcoge.dts
deleted file mode 100644
index d72fb5e219d0..000000000000
--- a/src/powerpc/mgcoge.dts
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * Device Tree for the MGCOGE plattform from keymile
- *
- * Copyright 2008 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
-	model = "MGCOGE";
-	compatible = "keymile,km82xx";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &eth0;
-		serial0 = &smc2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8247@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <16384>;
-			i-cache-size = <16384>;
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			bus-frequency = <0>; /* Filled in by U-Boot */
-		};
-	};
-
-	localbus@f0010100 {
-		compatible = "fsl,mpc8247-localbus",
-		             "fsl,pq2-localbus",
-		             "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xf0010100 0x40>;
-
-		ranges = <0 0 0xfe000000 0x00400000
-			  1 0 0x30000000 0x00010000
-			  2 0 0x40000000 0x00010000
-			  5 0 0x50000000 0x04000000
-			>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0x0 0x400000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <1>;
-			device-width = <1>;
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000 0xC0000>;
-			};
-			partition@1 {
-				label = "env";
-				reg = <0xC0000 0x20000>;
-			};
-			partition@2 {
-				label = "envred";
-				reg = <0xE0000 0x20000>;
-			};
-			partition@3 {
-				label = "free";
-				reg = <0x100000 0x300000>;
-			};
-		};
-
-		flash@5,0 {
-			compatible = "cfi-flash";
-			reg = <5 0x00000000 0x02000000
-			       5 0x02000000 0x02000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <2>;
-			partition@app { /* 64 MBytes */
-				label = "ubi0";
-				reg = <0x00000000 0x04000000>;
-			};
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
-	};
-
-	soc@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8247-immr", "fsl,pq2-soc", "simple-bus";
-		ranges = <0x00000000 0xf0000000 0x00053000>;
-
-		// Temporary until code stops depending on it.
-		device_type = "soc";
-
-		cpm@119c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#interrupt-cells = <2>;
-			compatible = "fsl,mpc8247-cpm", "fsl,cpm2",
-					"simple-bus";
-			reg = <0x119c0 0x30>;
-			ranges;
-
-			muram {
-				compatible = "fsl,cpm-muram";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x80 0x1f80 0x9800 0x800>;
-				};
-			};
-
-			brg@119f0 {
-				compatible = "fsl,mpc8247-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x119f0 0x10 0x115f0 0x10>;
-			};
-
-			/* Monitor port/SMC2 */
-			smc2: serial@11a90 {
-				device_type = "serial";
-				compatible = "fsl,mpc8247-smc-uart",
-				             "fsl,cpm2-smc-uart";
-				reg = <0x11a90 0x20 0x88fc 0x02>;
-				interrupts = <5 8>;
-				interrupt-parent = <&PIC>;
-				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0x21200000>;
-				current-speed = <0>; /* Filled in by U-Boot */
-			};
-
-			eth0: ethernet@11a60 {
-				device_type = "network";
-				compatible = "fsl,mpc8247-scc-enet",
-				             "fsl,cpm2-scc-enet";
-				reg = <0x11a60 0x20 0x8300 0x100 0x11390 1>;
-				local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
-				interrupts = <43 8>;
-				interrupt-parent = <&PIC>;
-				linux,network-index = <0>;
-				fsl,cpm-command = <0xce00000>;
-				fixed-link = <0 0 10 0 0>;
-			};
-
-			i2c@11860 {
-				compatible = "fsl,mpc8272-i2c",
-					     "fsl,cpm2-i2c";
-				reg = <0x11860 0x20 0x8afc 0x2>;
-				interrupts = <1 8>;
-				interrupt-parent = <&PIC>;
-				fsl,cpm-command = <0x29600000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			mdio@10d40 {
-				compatible = "fsl,cpm2-mdio-bitbang";
-				reg = <0x10d00 0x14>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				fsl,mdio-pin = <12>;
-				fsl,mdc-pin = <13>;
-
-				phy0: ethernet-phy@0 {
-					reg = <0x0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <0x1>;
-				};
-			};
-
-			/* FCC1 management to switch */
-			ethernet@11300 {
-				device_type = "network";
-				compatible = "fsl,cpm2-fcc-enet";
-				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
-				local-mac-address = [ 00 01 02 03 04 07 ];
-				interrupts = <32 8>;
-				interrupt-parent = <&PIC>;
-				phy-handle = <&phy0>;
-				linux,network-index = <1>;
-				fsl,cpm-command = <0x12000300>;
-			};
-
-			/* FCC2 to redundant core unit over backplane */
-			ethernet@11320 {
-				device_type = "network";
-				compatible = "fsl,cpm2-fcc-enet";
-				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
-				local-mac-address = [ 00 01 02 03 04 08 ];
-				interrupts = <33 8>;
-				interrupt-parent = <&PIC>;
-				phy-handle = <&phy1>;
-				linux,network-index = <2>;
-				fsl,cpm-command = <0x16200300>;
-			};
-
-			usb@11b60 {
-				compatible = "fsl,mpc8272-cpm-usb";
-				mode = "peripheral";
-				reg = <0x11b60 0x40 0x8b00 0x100>;
-				interrupts = <11 8>;
-				interrupt-parent = <&PIC>;
-				usb-clock = <5>;
-			};
-			spi@11aa0 {
-				cell-index = <0>;
-				compatible = "fsl,spi", "fsl,cpm2-spi";
-				reg = <0x11a80 0x40 0x89fc 0x2>;
-				interrupts = <2 8>;
-				interrupt-parent = <&PIC>;
-				gpios = < &cpm2_pio_d 19 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ds3106@1 {
-					compatible = "gen,spidev";
-					reg = <0>;
-					spi-max-frequency = <8000000>;
-				};
-			};
-
-		};
-
-		cpm2_pio_d: gpio-controller@10d60 {
-			#gpio-cells = <2>;
-			compatible = "fsl,cpm2-pario-bank";
-			reg = <0x10d60 0x14>;
-			gpio-controller;
-		};
-
-		cpm2_pio_c: gpio-controller@10d40 {
-			#gpio-cells = <2>;
-			compatible = "fsl,cpm2-pario-bank";
-			reg = <0x10d40 0x14>;
-			gpio-controller;
-		};
-
-		PIC: interrupt-controller@10c00 {
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0x10c00 0x80>;
-			compatible = "fsl,mpc8247-pic", "fsl,pq2-pic";
-		};
-	};
-};
diff --git a/src/powerpc/motionpro.dts b/src/powerpc/motionpro.dts
deleted file mode 100644
index bbabd97492ad..000000000000
--- a/src/powerpc/motionpro.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Motion-PRO board Device Tree Source
- *
- * Copyright (C) 2007 Semihalf
- * Marian Balakowicz <m8@semihalf.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 { fsl,has-wdt; };
-&gpt6 { // Motion-PRO status LED
-	compatible = "promess,motionpro-led";
-	label = "motionpro-statusled";
-	blink-delay = <100>; // 100 msec
-};
-&gpt7 { // Motion-PRO ready LED
-	compatible = "promess,motionpro-led";
-	label = "motionpro-readyled";
-};
-
-/ {
-	model = "promess,motionpro";
-	compatible = "promess,motionpro";
-
-	soc5200@f0000000 {
-		can@900 {
-			status = "disabled";
-		};
-
-		psc@2000 {		// PSC1
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		// PSC2 in spi master mode 
-		psc@2200 {		// PSC2
-			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
-			cell-index = <1>;
-		};
-
-		psc@2400 {		// PSC3
-			status = "disabled";
-		};
-
-		psc@2600 {		// PSC4
-			status = "disabled";
-		};
-
-		psc@2800 {		// PSC5
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2c00 {		// PSC6
-			status = "disabled";
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@2 {
-				reg = <2>;
-			};
-		};
-
-		i2c@3d00 {
-			status = "disabled";
-		};
-
-		i2c@3d40 {
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-			};
-		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
-	};
-
-	pci@f0000d00 {
-		status = "disabled";
-	};
-
-	localbus {
-		ranges = <0 0 0xff000000 0x01000000
-			  1 0 0x50000000 0x00010000
-			  2 0 0x50010000 0x00010000
-			  3 0 0x50020000 0x00010000>;
-
-		// 8-bit DualPort SRAM on LocalPlus Bus CS1
-		kollmorgen@1,0 {
-			compatible = "promess,motionpro-kollmorgen";
-			reg = <1 0 0x10000>;
-			interrupts = <1 1 0>;
-		};
-
-		// 8-bit board CPLD on LocalPlus Bus CS2
-		cpld@2,0 {
-			compatible = "promess,motionpro-cpld";
-			reg = <2 0 0x10000>;
-		};
-
-		// 8-bit custom Anybus Module on LocalPlus Bus CS3
-		anybus@3,0 {
-			compatible = "promess,motionpro-anybus";
-			reg = <3 0 0x10000>;
-		};
-		pro_module_general@3,0 {
-			compatible = "promess,pro_module_general";
-			reg = <3 0 3>;
-		};
-		pro_module_dio@3,800 {
-			compatible = "promess,pro_module_dio";
-			reg = <3 0x800 2>;
-		};
-
-		// 16-bit flash device at LocalPlus Bus CS0
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x01000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-		};
-
-	};
-};
diff --git a/src/powerpc/mpc5121.dtsi b/src/powerpc/mpc5121.dtsi
deleted file mode 100644
index 7f9d14f5c4da..000000000000
--- a/src/powerpc/mpc5121.dtsi
+++ /dev/null
@@ -1,523 +0,0 @@
-/*
- * base MPC5121 Device Tree Source
- *
- * Copyright 2007-2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <dt-bindings/clock/mpc512x-clock.h>
-
-/dts-v1/;
-
-/ {
-	model = "mpc5121";
-	compatible = "fsl,mpc5121";
-	#address-cells = <1>;
-	#size-cells = <1>;
-        interrupt-parent = <&ipic>;
-
-	aliases {
-		ethernet0 = &eth0;
-		pci = &pci;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5121@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	/* 32 bytes */
-			i-cache-line-size = <0x20>;	/* 32 bytes */
-			d-cache-size = <0x8000>;	/* L1, 32K */
-			i-cache-size = <0x8000>;	/* L1, 32K */
-			timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */
-			bus-frequency = <198000000>;	/* 198 MHz csb bus */
-			clock-frequency = <396000000>;	/* 396 MHz ppc core */
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	/* 256MB at 0 */
-	};
-
-	mbx@20000000 {
-		compatible = "fsl,mpc5121-mbx";
-		reg = <0x20000000 0x4000>;
-		interrupts = <66 0x8>;
-		clocks = <&clks MPC512x_CLK_MBX_BUS>,
-			 <&clks MPC512x_CLK_MBX_3D>,
-			 <&clks MPC512x_CLK_MBX>;
-		clock-names = "mbx-bus", "mbx-3d", "mbx";
-	};
-
-	sram@30000000 {
-		compatible = "fsl,mpc5121-sram";
-		reg = <0x30000000 0x20000>;	/* 128K at 0x30000000 */
-	};
-
-	nfc@40000000 {
-		compatible = "fsl,mpc5121-nfc";
-		reg = <0x40000000 0x100000>;	/* 1M at 0x40000000 */
-		interrupts = <6 8>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		clocks = <&clks MPC512x_CLK_NFC>;
-		clock-names = "ipg";
-	};
-
-	localbus@80000020 {
-		compatible = "fsl,mpc5121-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x80000020 0x40>;
-		interrupts = <7 0x8>;
-		ranges = <0x0 0x0 0xfc000000 0x04000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: osc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <33000000>;
-		};
-	};
-
-	soc@80000000 {
-		compatible = "fsl,mpc5121-immr";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x80000000 0x400000>;
-		reg = <0x80000000 0x400000>;
-		bus-frequency = <66000000>;	/* 66 MHz ips bus */
-
-
-		/*
-		 * IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: interrupt-controller@c00 {
-			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0xc00 0x100>;
-		};
-
-		/* Watchdog timer */
-		wdt@900 {
-			compatible = "fsl,mpc5121-wdt";
-			reg = <0x900 0x100>;
-		};
-
-		/* Real time clock */
-		rtc@a00 {
-			compatible = "fsl,mpc5121-rtc";
-			reg = <0xa00 0x100>;
-			interrupts = <79 0x8 80 0x8>;
-		};
-
-		/* Reset module */
-		reset@e00 {
-			compatible = "fsl,mpc5121-reset";
-			reg = <0xe00 0x100>;
-		};
-
-		/* Clock control */
-		clks: clock@f00 {
-			compatible = "fsl,mpc5121-clock";
-			reg = <0xf00 0x100>;
-			#clock-cells = <1>;
-			clocks = <&osc>;
-			clock-names = "osc";
-		};
-
-		/* Power Management Controller */
-		pmc@1000{
-			compatible = "fsl,mpc5121-pmc";
-			reg = <0x1000 0x100>;
-			interrupts = <83 0x8>;
-		};
-
-		gpio@1100 {
-			compatible = "fsl,mpc5121-gpio";
-			reg = <0x1100 0x100>;
-			interrupts = <78 0x8>;
-		};
-
-		can@1300 {
-			compatible = "fsl,mpc5121-mscan";
-			reg = <0x1300 0x80>;
-			interrupts = <12 0x8>;
-			clocks = <&clks MPC512x_CLK_BDLC>,
-				 <&clks MPC512x_CLK_IPS>,
-				 <&clks MPC512x_CLK_SYS>,
-				 <&clks MPC512x_CLK_REF>,
-				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
-			clock-names = "ipg", "ips", "sys", "ref", "mclk";
-		};
-
-		can@1380 {
-			compatible = "fsl,mpc5121-mscan";
-			reg = <0x1380 0x80>;
-			interrupts = <13 0x8>;
-			clocks = <&clks MPC512x_CLK_BDLC>,
-				 <&clks MPC512x_CLK_IPS>,
-				 <&clks MPC512x_CLK_SYS>,
-				 <&clks MPC512x_CLK_REF>,
-				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
-			clock-names = "ipg", "ips", "sys", "ref", "mclk";
-		};
-
-		sdhc@1500 {
-			compatible = "fsl,mpc5121-sdhc";
-			reg = <0x1500 0x100>;
-			interrupts = <8 0x8>;
-			dmas = <&dma0 30>;
-			dma-names = "rx-tx";
-			clocks = <&clks MPC512x_CLK_IPS>,
-				 <&clks MPC512x_CLK_SDHC>;
-			clock-names = "ipg", "per";
-		};
-
-		i2c@1700 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1700 0x20>;
-			interrupts = <9 0x8>;
-			clocks = <&clks MPC512x_CLK_I2C>;
-			clock-names = "ipg";
-		};
-
-		i2c@1720 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1720 0x20>;
-			interrupts = <10 0x8>;
-			clocks = <&clks MPC512x_CLK_I2C>;
-			clock-names = "ipg";
-		};
-
-		i2c@1740 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1740 0x20>;
-			interrupts = <11 0x8>;
-			clocks = <&clks MPC512x_CLK_I2C>;
-			clock-names = "ipg";
-		};
-
-		i2ccontrol@1760 {
-			compatible = "fsl,mpc5121-i2c-ctrl";
-			reg = <0x1760 0x8>;
-		};
-
-		axe@2000 {
-			compatible = "fsl,mpc5121-axe";
-			reg = <0x2000 0x100>;
-			interrupts = <42 0x8>;
-			clocks = <&clks MPC512x_CLK_AXE>;
-			clock-names = "ipg";
-		};
-
-		display@2100 {
-			compatible = "fsl,mpc5121-diu";
-			reg = <0x2100 0x100>;
-			interrupts = <64 0x8>;
-			clocks = <&clks MPC512x_CLK_DIU>;
-			clock-names = "ipg";
-		};
-
-		can@2300 {
-			compatible = "fsl,mpc5121-mscan";
-			reg = <0x2300 0x80>;
-			interrupts = <90 0x8>;
-			clocks = <&clks MPC512x_CLK_BDLC>,
-				 <&clks MPC512x_CLK_IPS>,
-				 <&clks MPC512x_CLK_SYS>,
-				 <&clks MPC512x_CLK_REF>,
-				 <&clks MPC512x_CLK_MSCAN2_MCLK>;
-			clock-names = "ipg", "ips", "sys", "ref", "mclk";
-		};
-
-		can@2380 {
-			compatible = "fsl,mpc5121-mscan";
-			reg = <0x2380 0x80>;
-			interrupts = <91 0x8>;
-			clocks = <&clks MPC512x_CLK_BDLC>,
-				 <&clks MPC512x_CLK_IPS>,
-				 <&clks MPC512x_CLK_SYS>,
-				 <&clks MPC512x_CLK_REF>,
-				 <&clks MPC512x_CLK_MSCAN3_MCLK>;
-			clock-names = "ipg", "ips", "sys", "ref", "mclk";
-		};
-
-		viu@2400 {
-			compatible = "fsl,mpc5121-viu";
-			reg = <0x2400 0x400>;
-			interrupts = <67 0x8>;
-			clocks = <&clks MPC512x_CLK_VIU>;
-			clock-names = "ipg";
-		};
-
-		mdio@2800 {
-			compatible = "fsl,mpc5121-fec-mdio";
-			reg = <0x2800 0x800>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clks MPC512x_CLK_FEC>;
-			clock-names = "per";
-		};
-
-		eth0: ethernet@2800 {
-			device_type = "network";
-			compatible = "fsl,mpc5121-fec";
-			reg = <0x2800 0x800>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <4 0x8>;
-			clocks = <&clks MPC512x_CLK_FEC>;
-			clock-names = "per";
-		};
-
-		/* USB1 using external ULPI PHY */
-		usb@3000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x3000 0x600>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <43 0x8>;
-			dr_mode = "otg";
-			phy_type = "ulpi";
-			clocks = <&clks MPC512x_CLK_USB1>;
-			clock-names = "ipg";
-		};
-
-		/* USB0 using internal UTMI PHY */
-		usb@4000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x4000 0x600>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <44 0x8>;
-			dr_mode = "otg";
-			phy_type = "utmi_wide";
-			clocks = <&clks MPC512x_CLK_USB2>;
-			clock-names = "ipg";
-		};
-
-		/* IO control */
-		ioctl@a000 {
-			compatible = "fsl,mpc5121-ioctl";
-			reg = <0xA000 0x1000>;
-		};
-
-		/* LocalPlus controller */
-		lpc@10000 {
-			compatible = "fsl,mpc5121-lpc";
-			reg = <0x10000 0x200>;
-		};
-
-		pata@10200 {
-			compatible = "fsl,mpc5121-pata";
-			reg = <0x10200 0x100>;
-			interrupts = <5 0x8>;
-			clocks = <&clks MPC512x_CLK_PATA>;
-			clock-names = "ipg";
-		};
-
-		/* 512x PSCs are not 52xx PSC compatible */
-
-		/* PSC0 */
-		psc@11000 {
-			compatible = "fsl,mpc5121-psc";
-			reg = <0x11000 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC0>,
-				 <&clks MPC512x_CLK_PSC0_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC1 */
-		psc@11100 {
-			compatible = "fsl,mpc5121-psc";
-			reg = <0x11100 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC1>,
-				 <&clks MPC512x_CLK_PSC1_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC2 */
-		psc@11200 {
-			compatible = "fsl,mpc5121-psc";
-			reg = <0x11200 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC2>,
-				 <&clks MPC512x_CLK_PSC2_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC3 */
-		psc@11300 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			reg = <0x11300 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC3>,
-				 <&clks MPC512x_CLK_PSC3_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC4 */
-		psc@11400 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-			reg = <0x11400 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC4>,
-				 <&clks MPC512x_CLK_PSC4_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC5 */
-		psc@11500 {
-			compatible = "fsl,mpc5121-psc";
-			reg = <0x11500 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC5>,
-				 <&clks MPC512x_CLK_PSC5_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC6 */
-		psc@11600 {
-			compatible = "fsl,mpc5121-psc";
-			reg = <0x11600 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC6>,
-				 <&clks MPC512x_CLK_PSC6_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC7 */
-		psc@11700 {
-			compatible = "fsl,mpc5121-psc";
-			reg = <0x11700 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC7>,
-				 <&clks MPC512x_CLK_PSC7_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC8 */
-		psc@11800 {
-			compatible = "fsl,mpc5121-psc";
-			reg = <0x11800 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC8>,
-				 <&clks MPC512x_CLK_PSC8_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC9 */
-		psc@11900 {
-			compatible = "fsl,mpc5121-psc";
-			reg = <0x11900 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC9>,
-				 <&clks MPC512x_CLK_PSC9_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC10 */
-		psc@11a00 {
-			compatible = "fsl,mpc5121-psc";
-			reg = <0x11a00 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC10>,
-				 <&clks MPC512x_CLK_PSC10_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		/* PSC11 */
-		psc@11b00 {
-			compatible = "fsl,mpc5121-psc";
-			reg = <0x11b00 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC11>,
-				 <&clks MPC512x_CLK_PSC11_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		pscfifo@11f00 {
-			compatible = "fsl,mpc5121-psc-fifo";
-			reg = <0x11f00 0x100>;
-			interrupts = <40 0x8>;
-			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
-			clock-names = "ipg";
-		};
-
-		dma0: dma@14000 {
-			compatible = "fsl,mpc5121-dma";
-			reg = <0x14000 0x1800>;
-			interrupts = <65 0x8>;
-			#dma-cells = <1>;
-		};
-	};
-
-	pci: pci@80008500 {
-		compatible = "fsl,mpc5121-pci";
-		device_type = "pci";
-		interrupts = <1 0x8>;
-		clock-frequency = <0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		clocks = <&clks MPC512x_CLK_PCI>;
-		clock-names = "ipg";
-
-		reg = <0x80008500 0x100	/* internal registers */
-		       0x80008300 0x8>;	/* config space access registers */
-		bus-range = <0x0 0x0>;
-		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
-	};
-};
diff --git a/src/powerpc/mpc5121ads.dts b/src/powerpc/mpc5121ads.dts
deleted file mode 100644
index c228a0a232a6..000000000000
--- a/src/powerpc/mpc5121ads.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * MPC5121E ADS Device Tree Source
- *
- * Copyright 2007-2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <mpc5121.dtsi>
-
-/ {
-	model = "mpc5121ads";
-	compatible = "fsl,mpc5121ads", "fsl,mpc5121";
-
-	nfc@40000000 {
-		/*
-		 * ADS has two Hynix 512MB Nand flash chips in a single
-		 * stacked package.
-		 */
-		chips = <2>;
-
-		nand@0 {
-			label = "nand";
-			reg = <0x00000000 0x40000000>;	/* 512MB + 512MB */
-		};
-	};
-
-	localbus@80000020 {
-		ranges = <0x0 0x0 0xfc000000 0x04000000
-			  0x2 0x0 0x82000000 0x00008000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0x0 0x4000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <4>;
-			device-width = <2>;
-
-			protected@0 {
-				label = "protected";
-				reg = <0x00000000 0x00040000>;  // first sector is protected
-				read-only;
-			};
-			filesystem@40000 {
-				label = "filesystem";
-				reg = <0x00040000 0x03c00000>;  // 60M for filesystem
-			};
-			kernel@3c40000 {
-				label = "kernel";
-				reg = <0x03c40000 0x00280000>;  // 2.5M for kernel
-			};
-			device-tree@3ec0000 {
-				label = "device-tree";
-				reg = <0x03ec0000 0x00040000>;  // one sector for device tree
-			};
-			u-boot@3f00000 {
-				label = "u-boot";
-				reg = <0x03f00000 0x00100000>;  // 1M for u-boot
-				read-only;
-			};
-		};
-
-		board-control@2,0 {
-			compatible = "fsl,mpc5121ads-cpld";
-			reg = <0x2 0x0 0x8000>;
-		};
-
-		cpld_pic: pic@2,a {
-			compatible = "fsl,mpc5121ads-cpld-pic";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x2 0xa 0x5>;
-			/* irq routing:
-			 * all irqs but touch screen are routed to irq0 (ipic 48)
-			 * touch screen is statically routed to irq1 (ipic 17)
-			 * so don't use it here
-			 */
-			interrupts = <48 0x8>;
-		};
-	};
-
-	soc@80000000 {
-
-		i2c@1700 {
-			fsl,preserve-clocking;
-
-			hwmon@4a {
-				compatible = "adi,ad7414";
-				reg = <0x4a>;
-			};
-
-			eeprom@50 {
-				compatible = "at,24c32";
-				reg = <0x50>;
-			};
-
-			rtc@68 {
-				compatible = "stm,m41t62";
-				reg = <0x68>;
-			};
-		};
-
-		eth0: ethernet@2800 {
-			phy-handle = <&phy0>;
-		};
-
-		can@2300 {
-			status = "disabled";
-		};
-
-		can@2380 {
-			status = "disabled";
-		};
-
-		viu@2400 {
-			status = "disabled";
-		};
-
-		mdio@2800 {
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-			};
-		};
-
-		/* mpc5121ads only uses USB0 */
-		usb@3000 {
-			status = "disabled";
-		};
-
-		/* USB0 using internal UTMI PHY */
-		usb@4000 {
-			dr_mode = "host";
-			fsl,invert-drvvbus;
-			fsl,invert-pwr-fault;
-		};
-
-		/* PSC3 serial port A aka ttyPSC0 */
-		psc@11300 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-		};
-
-		/* PSC4 serial port B aka ttyPSC1 */
-		psc@11400 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-		};
-
-		/* PSC5 in ac97 mode */
-		ac97: psc@11500 {
-			compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
-			fsl,mode = "ac97-slave";
-			fsl,rx-fifo-size = <384>;
-			fsl,tx-fifo-size = <384>;
-		};
-	};
-
-	pci: pci@80008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 0x15 - Slot 1 PCI */
-				 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
-				 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
-				 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
-				 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
-
-				/* IDSEL 0x16 - Slot 2 MiniPCI */
-				 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
-				 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
-
-				/* IDSEL 0x17 - Slot 3 MiniPCI */
-				 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
-				 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
-				>;
-	};
-};
diff --git a/src/powerpc/mpc5125twr.dts b/src/powerpc/mpc5125twr.dts
deleted file mode 100644
index e4f297471748..000000000000
--- a/src/powerpc/mpc5125twr.dts
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * STx/Freescale ADS5125 MPC5125 silicon
- *
- * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved.
- *
- * Reworked by Matteo Facchinetti (engineering@sirius-es.it)
- * Copyright (C) 2013 Sirius Electronic Systems
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <dt-bindings/clock/mpc512x-clock.h>
-
-/dts-v1/;
-
-/ {
-	model = "mpc5125twr"; // In BSP "mpc5125ads"
-	compatible = "fsl,mpc5125ads", "fsl,mpc5125";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&ipic>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		ethernet0 = &eth0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5125@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
-			bus-frequency = <198000000>;	// 198 MHz csb bus
-			clock-frequency = <396000000>;	// 396 MHz ppc core
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	// 256MB at 0
-	};
-
-	sram@30000000 {
-		compatible = "fsl,mpc5121-sram";
-		reg = <0x30000000 0x08000>;		// 32K at 0x30000000
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: osc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <33000000>;
-		};
-	};
-
-	soc@80000000 {
-		compatible = "fsl,mpc5121-immr";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x80000000 0x400000>;
-		reg = <0x80000000 0x400000>;
-		bus-frequency = <66000000>;	// 66 MHz ips bus
-
-		// IPIC
-		// interrupts cell = <intr #, sense>
-		// sense values match linux IORESOURCE_IRQ_* defines:
-		// sense == 8: Level, low assertion
-		// sense == 2: Edge, high-to-low change
-		//
-		ipic: interrupt-controller@c00 {
-			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0xc00 0x100>;
-		};
-
-		rtc@a00 {	// Real time clock
-			compatible = "fsl,mpc5121-rtc";
-			reg = <0xa00 0x100>;
-			interrupts = <79 0x8 80 0x8>;
-		};
-
-		reset@e00 {	// Reset module
-			compatible = "fsl,mpc5125-reset";
-			reg = <0xe00 0x100>;
-		};
-
-		clks: clock@f00 {	// Clock control
-			compatible = "fsl,mpc5121-clock";
-			reg = <0xf00 0x100>;
-			#clock-cells = <1>;
-			clocks = <&osc>;
-			clock-names = "osc";
-		};
-
-		pmc@1000{  // Power Management Controller
-			compatible = "fsl,mpc5121-pmc";
-			reg = <0x1000 0x100>;
-			interrupts = <83 0x2>;
-		};
-
-		gpio0: gpio@1100 {
-			compatible = "fsl,mpc5125-gpio";
-			reg = <0x1100 0x080>;
-			interrupts = <78 0x8>;
-		};
-
-		gpio1: gpio@1180 {
-			compatible = "fsl,mpc5125-gpio";
-			reg = <0x1180 0x080>;
-			interrupts = <86 0x8>;
-		};
-
-		can@1300 { // CAN rev.2
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <12 0x8>;
-			reg = <0x1300 0x80>;
-			clocks = <&clks MPC512x_CLK_BDLC>,
-				 <&clks MPC512x_CLK_IPS>,
-				 <&clks MPC512x_CLK_SYS>,
-				 <&clks MPC512x_CLK_REF>,
-				 <&clks MPC512x_CLK_MSCAN0_MCLK>;
-			clock-names = "ipg", "ips", "sys", "ref", "mclk";
-		};
-
-		can@1380 {
-			compatible = "fsl,mpc5121-mscan";
-			interrupts = <13 0x8>;
-			reg = <0x1380 0x80>;
-			clocks = <&clks MPC512x_CLK_BDLC>,
-				 <&clks MPC512x_CLK_IPS>,
-				 <&clks MPC512x_CLK_SYS>,
-				 <&clks MPC512x_CLK_REF>,
-				 <&clks MPC512x_CLK_MSCAN1_MCLK>;
-			clock-names = "ipg", "ips", "sys", "ref", "mclk";
-		};
-
-		sdhc@1500 {
-			compatible = "fsl,mpc5121-sdhc";
-			interrupts = <8 0x8>;
-			reg = <0x1500 0x100>;
-			clocks = <&clks MPC512x_CLK_IPS>,
-				 <&clks MPC512x_CLK_SDHC>;
-			clock-names = "ipg", "per";
-		};
-
-		i2c@1700 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1700 0x20>;
-			interrupts = <0x9 0x8>;
-			clocks = <&clks MPC512x_CLK_I2C>;
-			clock-names = "ipg";
-		};
-
-		i2c@1720 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1720 0x20>;
-			interrupts = <0xa 0x8>;
-			clocks = <&clks MPC512x_CLK_I2C>;
-			clock-names = "ipg";
-		};
-
-		i2c@1740 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-			reg = <0x1740 0x20>;
-			interrupts = <0xb 0x8>;
-			clocks = <&clks MPC512x_CLK_I2C>;
-			clock-names = "ipg";
-		};
-
-		i2ccontrol@1760 {
-			compatible = "fsl,mpc5121-i2c-ctrl";
-			reg = <0x1760 0x8>;
-		};
-
-		diu@2100 {
-			compatible = "fsl,mpc5121-diu";
-			reg = <0x2100 0x100>;
-			interrupts = <64 0x8>;
-			clocks = <&clks MPC512x_CLK_DIU>;
-			clock-names = "ipg";
-		};
-
-		mdio@2800 {
-			compatible = "fsl,mpc5121-fec-mdio";
-			reg = <0x2800 0x800>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-			};
-		};
-
-		eth0: ethernet@2800 {
-			compatible = "fsl,mpc5125-fec";
-			reg = <0x2800 0x800>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <4 0x8>;
-			phy-handle = < &phy0 >;
-			phy-connection-type = "rmii";
-			clocks = <&clks MPC512x_CLK_FEC>;
-			clock-names = "per";
-		};
-
-		// IO control
-		ioctl@a000 {
-			compatible = "fsl,mpc5125-ioctl";
-			reg = <0xA000 0x1000>;
-		};
-
-		// disable USB1 port
-		// TODO:
-		// correct pinmux config and fix USB3320 ulpi dependency
-		// before re-enabling it
-		usb@3000 {
-			compatible = "fsl,mpc5121-usb2-dr";
-			reg = <0x3000 0x400>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <43 0x8>;
-			dr_mode = "host";
-			phy_type = "ulpi";
-			clocks = <&clks MPC512x_CLK_USB1>;
-			clock-names = "ipg";
-			status = "disabled";
-		};
-
-		// 5125 PSCs are not 52xx or 5121 PSC compatible
-		// PSC1 uart0 aka ttyPSC0
-		serial@11100 {
-			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
-			reg = <0x11100 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC1>,
-				 <&clks MPC512x_CLK_PSC1_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		// PSC9 uart1 aka ttyPSC1
-		serial@11900 {
-			compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc";
-			reg = <0x11900 0x100>;
-			interrupts = <40 0x8>;
-			fsl,rx-fifo-size = <16>;
-			fsl,tx-fifo-size = <16>;
-			clocks = <&clks MPC512x_CLK_PSC9>,
-				 <&clks MPC512x_CLK_PSC9_MCLK>;
-			clock-names = "ipg", "mclk";
-		};
-
-		pscfifo@11f00 {
-			compatible = "fsl,mpc5121-psc-fifo";
-			reg = <0x11f00 0x100>;
-			interrupts = <40 0x8>;
-			clocks = <&clks MPC512x_CLK_PSC_FIFO>;
-			clock-names = "ipg";
-		};
-
-		dma@14000 {
-			compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2"
-			reg = <0x14000 0x1800>;
-			interrupts = <65 0x8>;
-		};
-	};
-};
diff --git a/src/powerpc/mpc5200b.dtsi b/src/powerpc/mpc5200b.dtsi
deleted file mode 100644
index 969b2200b2f9..000000000000
--- a/src/powerpc/mpc5200b.dtsi
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * base MPC5200b Device Tree Source
- *
- * Copyright (C) 2010 SecretLab
- * Grant Likely <grant@secretlab.ca>
- * John Bonesio <bones@secretlab.ca>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "fsl,mpc5200b";
-	compatible = "fsl,mpc5200b";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		powerpc: PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory: memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
-
-	soc: soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
-		gpt0: timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
-			// add 'fsl,has-wdt' to enable watchdog
-		};
-
-		gpt1: timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		gpt2: timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		gpt3: timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		gpt4: timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		gpt5: timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
-		};
-
-		gpt6: timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-		};
-
-		gpt7: timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			#gpio-cells = <2>;  // Add 'gpio-controller;' to enable gpio mode
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb: usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
-		};
-
-		psc1: psc@2000 {		// PSC1
-			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
-		};
-
-		psc2: psc@2200 {		// PSC2
-			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
-		};
-
-		psc3: psc@2400 {		// PSC3
-			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
-		};
-
-		psc4: psc@2600 {		// PSC4
-			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
-			reg = <0x2600 0x100>;
-			interrupts = <2 11 0>;
-		};
-
-		psc5: psc@2800 {		// PSC5
-			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
-			reg = <0x2800 0x100>;
-			interrupts = <2 12 0>;
-		};
-
-		psc6: psc@2c00 {		// PSC6
-			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
-		};
-
-		eth0: ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-		};
-
-		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-		};
-
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		sclpc@3c00 {
-			compatible = "fsl,mpc5200-lpbfifo";
-			reg = <0x3c00 0x60>;
-			interrupts = <2 23 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
-		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
-		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
-	};
-
-	pci: pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
-		// interrupt-map-mask = need to add
-		// interrupt-map = need to add
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
-		// ranges = need to add
-	};
-
-	localbus: localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xfc000000 0x2000000>;
-	};
-};
diff --git a/src/powerpc/mpc7448hpc2.dts b/src/powerpc/mpc7448hpc2.dts
deleted file mode 100644
index 20a0d22df473..000000000000
--- a/src/powerpc/mpc7448hpc2.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * MPC7448HPC2 (Taiga) board Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- * 2006 Roy Zang <Roy Zang at freescale.com>.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "mpc7448hpc2";
-	compatible = "mpc74xx";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells =<0>;
-				
-		PowerPC,7448@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K bytes
-			i-cache-size = <0x8000>;		// L1, 32K bytes
-			timebase-frequency = <0>;	// 33 MHz, from uboot
-			clock-frequency = <0>;		// From U-Boot
-			bus-frequency = <0>;		// From U-Boot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x20000000	// DDR2   512M at 0
-		       >;
-	};
-
-  	tsi108@c0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "tsi-bridge";
-		ranges = <0x0 0xc0000000 0x10000>;
-		reg = <0xc0000000 0x10000>;
-		bus-frequency = <0>;
-
-		i2c@7000 {
-			interrupt-parent = <&mpic>;
-			interrupts = <14 0>;
-			reg = <0x7000 0x400>;
-			device_type = "i2c";
-			compatible  = "tsi108-i2c";
-		};
-
-		MDIO: mdio@6000 {
-			compatible = "tsi108-mdio";
-			reg = <0x6000 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			phy8: ethernet-phy@8 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
-				reg = <0x8>;
-			};
-
-			phy9: ethernet-phy@9 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1>;
-				reg = <0x9>;
-			};
-
-		};
-
-		enet0: ethernet@6200 {
-			linux,network-index = <0>;
-			#size-cells = <0>;
-			device_type = "network";
-			compatible = "tsi108-ethernet";
-			reg = <0x6000 0x200>;
-			address = [ 00 06 D2 00 00 01 ];
-			interrupts = <16 2>;
-			interrupt-parent = <&mpic>;
-			mdio-handle = <&MDIO>;
-			phy-handle = <&phy8>;
-		};
-
-		enet1: ethernet@6600 {
-			linux,network-index = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			device_type = "network";
-			compatible = "tsi108-ethernet";
-			reg = <0x6400 0x200>;
-			address = [ 00 06 D2 00 00 02 ];
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-			mdio-handle = <&MDIO>;
-			phy-handle = <&phy9>;
-		};
-
-		serial0: serial@7808 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x7808 0x200>;
-			clock-frequency = <1064000000>;
-			interrupts = <12 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@7c08 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x7c08 0x200>;
-			clock-frequency = <1064000000>;
-			interrupts = <13 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-	  	mpic: pic@7400 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x7400 0x400>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-		pci0: pci@1000 {
-			compatible = "tsi108-pci";
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <0x1000 0x1000>;
-			bus-range = <0 0>;
-			ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000	
-				  0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>;
-			clock-frequency = <133333332>;
-			interrupt-parent = <&mpic>;
-			interrupts = <23 2>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-
-				/* IDSEL 0x11 */
-				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
-				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
-				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
-				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
-
-				/* IDSEL 0x12 */
-				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
-				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
-				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
-				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
-
-				/* IDSEL 0x13 */
-				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
-				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
-				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
-				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
-
-				/* IDSEL 0x14 */
-				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
-				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
-				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
-				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
-				>;
-
-			RT0: router@1180 {
-				clock-frequency = <0>;
-				interrupt-controller;
-				device_type = "pic-router";
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				big-endian;
-				interrupts = <23 2>;
-				interrupt-parent = <&mpic>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/mpc8272ads.dts b/src/powerpc/mpc8272ads.dts
deleted file mode 100644
index 6d2cddf64cfd..000000000000
--- a/src/powerpc/mpc8272ads.dts
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * MPC8272 ADS Device Tree Source
- *
- * Copyright 2005,2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC8272ADS";
-	compatible = "fsl,mpc8272ads";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-		serial0 = &scc1;
-		serial1 = &scc4;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8272@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <16384>;
-			i-cache-size = <16384>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	localbus@f0010100 {
-		compatible = "fsl,mpc8272-localbus",
-		             "fsl,pq2-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xf0010100 0x40>;
-
-		ranges = <0x0 0x0 0xff800000 0x00800000
-		          0x1 0x0 0xf4500000 0x8000
-		          0x3 0x0 0xf8200000 0x8000>;
-
-		flash@0,0 {
-			compatible = "jedec-flash";
-			reg = <0x0 0x0 0x00800000>;
-			bank-width = <4>;
-			device-width = <1>;
-		};
-
-		board-control@1,0 {
-			reg = <0x1 0x0 0x20>;
-			compatible = "fsl,mpc8272ads-bcsr";
-		};
-
-		PCI_PIC: interrupt-controller@3,0 {
-			compatible = "fsl,mpc8272ads-pci-pic",
-			             "fsl,pq2ads-pci-pic";
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			reg = <0x3 0x0 0x8>;
-			interrupt-parent = <&PIC>;
-			interrupts = <20 8>;
-		};
-	};
-
-
-	pci@f0010800 {
-		device_type = "pci";
-		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
-		compatible = "fsl,mpc8272-pci", "fsl,pq2-pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-		                 /* IDSEL 0x16 */
-		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
-		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
-		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
-		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
-
-		                 /* IDSEL 0x17 */
-		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
-		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
-		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
-		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
-
-		                 /* IDSEL 0x18 */
-		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
-		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
-		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
-		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
-
-		interrupt-parent = <&PIC>;
-		interrupts = <18 8>;
-		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
-	};
-
-	soc@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8272", "fsl,pq2-soc";
-		ranges = <0x0 0xf0000000 0x53000>;
-
-		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <0xf0000000 0x53000>;
-
-		cpm@119c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
-			reg = <0x119c0 0x30>;
-			ranges;
-
-			muram@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x0 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x2000 0x9800 0x800>;
-				};
-			};
-
-			brg@119f0 {
-				compatible = "fsl,mpc8272-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x119f0 0x10 0x115f0 0x10>;
-			};
-
-			scc1: serial@11a00 {
-				device_type = "serial";
-				compatible = "fsl,mpc8272-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x11a00 0x20 0x8000 0x100>;
-				interrupts = <40 8>;
-				interrupt-parent = <&PIC>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x800000>;
-			};
-
-			scc4: serial@11a60 {
-				device_type = "serial";
-				compatible = "fsl,mpc8272-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x11a60 0x20 0x8300 0x100>;
-				interrupts = <43 8>;
-				interrupt-parent = <&PIC>;
-				fsl,cpm-brg = <4>;
-				fsl,cpm-command = <0xce00000>;
-			};
-
-			usb@11b60 {
-				compatible = "fsl,mpc8272-cpm-usb";
-				reg = <0x11b60 0x40 0x8b00 0x100>;
-				interrupts = <11 8>;
-				interrupt-parent = <&PIC>;
-				mode = "peripheral";
-			};
-
-			mdio@10d40 {
-				compatible = "fsl,mpc8272ads-mdio-bitbang",
-				             "fsl,mpc8272-mdio-bitbang",
-				             "fsl,cpm2-mdio-bitbang";
-				reg = <0x10d40 0x14>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				fsl,mdio-pin = <18>;
-				fsl,mdc-pin = <19>;
-
-				PHY0: ethernet-phy@0 {
-					interrupt-parent = <&PIC>;
-					interrupts = <23 8>;
-					reg = <0x0>;
-				};
-
-				PHY1: ethernet-phy@1 {
-					interrupt-parent = <&PIC>;
-					interrupts = <23 8>;
-					reg = <0x3>;
-				};
-			};
-
-			eth0: ethernet@11300 {
-				device_type = "network";
-				compatible = "fsl,mpc8272-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <32 8>;
-				interrupt-parent = <&PIC>;
-				phy-handle = <&PHY0>;
-				linux,network-index = <0>;
-				fsl,cpm-command = <0x12000300>;
-			};
-
-			eth1: ethernet@11320 {
-				device_type = "network";
-				compatible = "fsl,mpc8272-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <33 8>;
-				interrupt-parent = <&PIC>;
-				phy-handle = <&PHY1>;
-				linux,network-index = <1>;
-				fsl,cpm-command = <0x16200300>;
-			};
-
-			i2c@11860 {
-				compatible = "fsl,mpc8272-i2c",
-					     "fsl,cpm2-i2c";
-				reg = <0x11860 0x20 0x8afc 0x2>;
-				interrupts = <1 8>;
-				interrupt-parent = <&PIC>;
-				fsl,cpm-command = <0x29600000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		PIC: interrupt-controller@10c00 {
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0x10c00 0x80>;
-			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec1.0";
-			reg = <0x40000 0x13000>;
-			interrupts = <47 0x8>;
-			interrupt-parent = <&PIC>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x1010415>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/soc/cpm/serial@11a00";
-	};
-};
diff --git a/src/powerpc/mpc8308_p1m.dts b/src/powerpc/mpc8308_p1m.dts
deleted file mode 100644
index 57f86cdf9f36..000000000000
--- a/src/powerpc/mpc8308_p1m.dts
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * mpc8308_p1m Device Tree Source
- *
- * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "denx,mpc8308_p1m";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8308@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <16384>;
-			i-cache-size = <16384>;
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;	// 128MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		ranges = <0x0 0x0 0xfc000000 0x04000000
-		          0x1 0x0 0xfbff0000 0x00008000
-		          0x2 0x0 0xfbff8000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x4000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			u-boot@0 {
-				reg = <0x0 0x60000>;
-				read-only;
-			};
-			env@60000 {
-				reg = <0x60000 0x20000>;
-			};
-			env1@80000 {
-				reg = <0x80000 0x20000>;
-			};
-			kernel@a0000 {
-				reg = <0xa0000 0x200000>;
-			};
-			dtb@2a0000 {
-				reg = <0x2a0000 0x20000>;
-			};
-			ramdisk@2c0000 {
-				reg = <0x2c0000 0x640000>;
-			};
-			user@700000 {
-				reg = <0x700000 0x3900000>;
-			};
-		};
-
-		can@1,0 {
-			compatible = "nxp,sja1000";
-			reg = <0x1 0x0 0x80>;
-			interrupts = <18 0x8>;
-			interrups-parent = <&ipic>;
-		};
-
-		cpld@2,0 {
-			compatible = "denx,mpc8308_p1m-cpld";
-			reg = <0x2 0x0 0x8>;
-			interrupts = <48 0x8>;
-			interrups-parent = <&ipic>;
-		};
-	};
-
-	immr@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8308-immr", "simple-bus";
-		ranges = <0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-			fram@50 {
-				compatible = "ramtron,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-			pwm@28 {
-				compatible = "maxim,ds1050";
-				reg = <0x28>;
-			};
-			sensor@48 {
-				compatible = "maxim,max6625";
-				reg = <0x48>;
-			};
-			sensor@49 {
-				compatible = "maxim,max6625";
-				reg = <0x49>;
-			};
-			sensor@4b {
-				compatible = "maxim,max6625";
-				reg = <0x4b>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "peripheral";
-			phy_type = "ulpi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>;
-
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			interrupt-parent = <&ipic>;
-			phy-handle = < &phy1 >;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <19 0x8>;
-					reg = <0x2>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			interrupt-parent = <&ipic>;
-			phy-handle = < &phy2 >;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <133333333>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <133333333>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		gpio@c00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
-			reg = <0xc00 0x18>;
-			interrupts = <74 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		timer@500 {
-			compatible = "fsl,mpc8308-gtm", "fsl,gtm";
-			reg = <0x500 0x100>;
-			interrupts = <90 8 78 8 84 8 72 8>;
-			interrupt-parent = <&ipic>;
-			clock-frequency = <133333333>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: interrupt-controller@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-
-		ipic-msi@7c0 {
-			compatible = "fsl,ipic-msi";
-			reg = <0x7c0 0x40>;
-			msi-available-ranges = <0x0 0x100>;
-			interrupts = < 0x43 0x8
-					0x4  0x8
-					0x51 0x8
-					0x52 0x8
-					0x56 0x8
-					0x57 0x8
-					0x58 0x8
-					0x59 0x8 >;
-			interrupt-parent = < &ipic >;
-		};
-
-		dma@2c000 {
-			compatible = "fsl,mpc8308-dma";
-			reg = <0x2c000 0x1800>;
-			interrupts = <3 0x8
-					94 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-	};
-
-	pci0: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe0009000 0x00001000
-			0xb0000000 0x01000000>;
-		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
-		bus-range = <0 0>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &ipic 1 8>;
-		interrupts = <0x1 0x8>;
-		interrupt-parent = <&ipic>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xa0000000
-				  0x02000000 0 0xa0000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-};
diff --git a/src/powerpc/mpc8308rdb.dts b/src/powerpc/mpc8308rdb.dts
deleted file mode 100644
index d0211f0413c6..000000000000
--- a/src/powerpc/mpc8308rdb.dts
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * MPC8308RDB Device Tree Source
- *
- * Copyright 2009 Freescale Semiconductor Inc.
- * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,mpc8308rdb";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8308@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <16384>;
-			i-cache-size = <16384>;
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;	// 128MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// CS0 and CS1 are swapped when
-		// booting from nand, but the
-		// addresses are the same.
-		ranges = <0x0 0x0 0xfe000000 0x00800000
-		          0x1 0x0 0xe0600000 0x00002000
-		          0x2 0x0 0xf0000000 0x00020000
-		          0x3 0x0 0xfa000000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			u-boot@0 {
-				reg = <0x0 0x60000>;
-				read-only;
-			};
-			env@60000 {
-				reg = <0x60000 0x10000>;
-			};
-			env1@70000 {
-				reg = <0x70000 0x10000>;
-			};
-			kernel@80000 {
-				reg = <0x80000 0x200000>;
-			};
-			dtb@280000 {
-				reg = <0x280000 0x10000>;
-			};
-			ramdisk@290000 {
-				reg = <0x290000 0x570000>;
-			};
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8315-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x2000>;
-
-			jffs2@0 {
-				reg = <0x0 0x2000000>;
-			};
-		};
-	};
-
-	immr@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8308-immr", "simple-bus";
-		ranges = <0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "peripheral";
-			phy_type = "ulpi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x24000 0x1000>;
-
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = < &tbi0 >;
-			phy-handle = < &phy2 >;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = < &tbi1 >;
-			/* Vitesse 7385 isn't on the MDIO bus */
-			fixed-link = <1 1 1000 0 0>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <133333333>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <133333333>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		gpio@c00 {
-			#gpio-cells = <2>;
-			device_type = "gpio";
-			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
-			reg = <0xc00 0x18>;
-			interrupts = <74 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: interrupt-controller@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-
-		ipic-msi@7c0 {
-			compatible = "fsl,ipic-msi";
-			reg = <0x7c0 0x40>;
-			msi-available-ranges = <0x0 0x100>;
-			interrupts = < 0x43 0x8
-					0x4  0x8
-					0x51 0x8
-					0x52 0x8
-					0x56 0x8
-					0x57 0x8
-					0x58 0x8
-					0x59 0x8 >;
-			interrupt-parent = < &ipic >;
-		};
-
-		dma@2c000 {
-			compatible = "fsl,mpc8308-dma";
-			reg = <0x2c000 0x1800>;
-			interrupts = <3 0x8
-					94 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-	};
-
-	pci0: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe0009000 0x00001000
-			0xb0000000 0x01000000>;
-		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
-		bus-range = <0 0>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 1 8
-				 0 0 0 2 &ipic 1 8
-				 0 0 0 3 &ipic 1 8
-				 0 0 0 4 &ipic 1 8>;
-		interrupts = <0x1 0x8>;
-		interrupt-parent = <&ipic>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xa0000000
-				  0x02000000 0 0xa0000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-};
diff --git a/src/powerpc/mpc8313erdb.dts b/src/powerpc/mpc8313erdb.dts
deleted file mode 100644
index 4b635dc4ecde..000000000000
--- a/src/powerpc/mpc8313erdb.dts
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
- * MPC8313E RDB Device Tree Source
- *
- * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC8313ERDB";
-	compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8313@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <16384>;
-			i-cache-size = <16384>;
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;	// 128MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// CS0 and CS1 are swapped when
-		// booting from nand, but the
-		// addresses are the same.
-		ranges = <0x0 0x0 0xfe000000 0x00800000
-		          0x1 0x0 0xe2800000 0x00008000
-		          0x2 0x0 0xf0000000 0x00020000
-		          0x3 0x0 0xfa000000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8313-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x2000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	soc8313@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x03000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-				rtc@68 {
-					compatible = "dallas,ds1339";
-					reg = <0x68>;
-				};
-			};
-
-			crypto@30000 {
-				compatible = "fsl,sec2.2", "fsl,sec2.1",
-				             "fsl,sec2.0";
-				reg = <0x30000 0x10000>;
-				interrupts = <11 0x8>;
-				interrupt-parent = <&ipic>;
-				fsl,num-channels = <1>;
-				fsl,channel-fifo-len = <24>;
-				fsl,exec-units-mask = <0x4c>;
-				fsl,descriptor-types-mask = <0x0122003f>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			phy_type = "utmi_wide";
-			sleep = <&pmc 0x00300000>;
-		};
-
-		ptp_clock@24E00 {
-			compatible = "fsl,etsec-ptp";
-			reg = <0x24E00 0xB0>;
-			interrupts = <12 0x8 13 0x8>;
-			interrupt-parent = < &ipic >;
-			fsl,tclk-period = <10>;
-			fsl,tmr-prsc    = <100>;
-			fsl,tmr-add     = <0x999999A4>;
-			fsl,tmr-fiper1  = <0x3B9AC9F6>;
-			fsl,tmr-fiper2  = <0x00018696>;
-			fsl,max-adj     = <659999998>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			sleep = <&pmc 0x20000000>;
-			ranges = <0x0 0x24000 0x1000>;
-
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 0x8 36 0x8 35 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = < &tbi0 >;
-			/* Vitesse 7385 isn't on the MDIO bus */
-			fixed-link = <1 1 1000 0 0>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-				phy4: ethernet-phy@4 {
-					interrupt-parent = <&ipic>;
-					interrupts = <20 0x8>;
-					reg = <0x4>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <34 0x8 33 0x8 32 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = < &tbi1 >;
-			phy-handle = < &phy4 >;
-			sleep = <&pmc 0x10000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-
-
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 8>;
-			interrupt-parent = <&ipic>;
-			fsl,mpc8313-wakeup-timer = <&gtm1>;
-
-			/* Remove this (or change to "okay") if you have
-			 * a REVA3 or later board, if you apply one of the
-			 * workarounds listed in section 8.5 of the board
-			 * manual, or if you are adapting this device tree
-			 * to a different board.
-			 */
-			status = "fail";
-		};
-
-		gtm1: timer@500 {
-			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
-			reg = <0x500 0x100>;
-			interrupts = <90 8 78 8 84 8 72 8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		timer@600 {
-			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
-			reg = <0x600 0x100>;
-			interrupts = <91 8 79 8 85 8 73 8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	sleep-nexus {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		sleep = <&pmc 0x00010000>;
-		ranges;
-
-		pci0: pci@e0008500 {
-			cell-index = <1>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-					/* IDSEL 0x0E -mini PCI */
-					 0x7000 0x0 0x0 0x1 &ipic 18 0x8
-					 0x7000 0x0 0x0 0x2 &ipic 18 0x8
-					 0x7000 0x0 0x0 0x3 &ipic 18 0x8
-					 0x7000 0x0 0x0 0x4 &ipic 18 0x8
-
-					/* IDSEL 0x0F - PCI slot */
-					 0x7800 0x0 0x0 0x1 &ipic 17 0x8
-					 0x7800 0x0 0x0 0x2 &ipic 18 0x8
-					 0x7800 0x0 0x0 0x3 &ipic 17 0x8
-					 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <66 0x8>;
-			bus-range = <0x0 0x0>;
-			ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-				  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-				  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-			clock-frequency = <66666666>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <0xe0008500 0x100		/* internal registers */
-			       0xe0008300 0x8>;		/* config space access registers */
-			compatible = "fsl,mpc8349-pci";
-			device_type = "pci";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
-			reg = <0xe00082a8 4>;
-			ranges = <0 0xe0008100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-
-			dma-channel@0 {
-				compatible = "fsl,mpc8313-dma-channel",
-				             "fsl,elo-dma-channel";
-				reg = <0 0x28>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-				cell-index = <0>;
-			};
-
-			dma-channel@80 {
-				compatible = "fsl,mpc8313-dma-channel",
-				             "fsl,elo-dma-channel";
-				reg = <0x80 0x28>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-				cell-index = <1>;
-			};
-
-			dma-channel@100 {
-				compatible = "fsl,mpc8313-dma-channel",
-				             "fsl,elo-dma-channel";
-				reg = <0x100 0x28>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-				cell-index = <2>;
-			};
-
-			dma-channel@180 {
-				compatible = "fsl,mpc8313-dma-channel",
-				             "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-				cell-index = <3>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/mpc8315erdb.dts b/src/powerpc/mpc8315erdb.dts
deleted file mode 100644
index 43546844ea5a..000000000000
--- a/src/powerpc/mpc8315erdb.dts
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * MPC8315E RDB Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,mpc8315erdb";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8315@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <16384>;
-			i-cache-size = <16384>;
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;	// 128MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// CS0 and CS1 are swapped when
-		// booting from nand, but the
-		// addresses are the same.
-		ranges = <0x0 0x0 0xfe000000 0x00800000
-		          0x1 0x0 0xe0600000 0x00002000
-		          0x2 0x0 0xf0000000 0x00020000
-		          0x3 0x0 0xfa000000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8315-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x2000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	immr@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8315-immr", "simple-bus";
-		ranges = <0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-			};
-
-			mcu_pio: mcu@a {
-				#gpio-cells = <2>;
-				compatible = "fsl,mc9s08qg8-mpc8315erdb",
-					     "fsl,mcu-mpc8349emitx";
-				reg = <0x0a>;
-				gpio-controller;
-			};
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			phy_type = "utmi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = < &phy0 >;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&ipic>;
-					interrupts = <20 0x8>;
-					reg = <0x0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&ipic>;
-					interrupts = <19 0x8>;
-					reg = <0x1>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = < &phy1 >;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <133333333>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <133333333>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
-				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
-				     "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x97c>;
-			fsl,descriptor-types-mask = <0x3a30abf>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			cell-index = <1>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			cell-index = <2>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		gtm1: timer@500 {
-			compatible = "fsl,mpc8315-gtm", "fsl,gtm";
-			reg = <0x500 0x100>;
-			interrupts = <90 8 78 8 84 8 72 8>;
-			interrupt-parent = <&ipic>;
-			clock-frequency = <133333333>;
-		};
-
-		timer@600 {
-			compatible = "fsl,mpc8315-gtm", "fsl,gtm";
-			reg = <0x600 0x100>;
-			interrupts = <91 8 79 8 85 8 73 8>;
-			interrupt-parent = <&ipic>;
-			clock-frequency = <133333333>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: interrupt-controller@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-
-		ipic-msi@7c0 {
-			compatible = "fsl,ipic-msi";
-			reg = <0x7c0 0x40>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <0x43 0x8
-				      0x4  0x8
-				      0x51 0x8
-				      0x52 0x8
-				      0x56 0x8
-				      0x57 0x8
-				      0x58 0x8
-				      0x59 0x8>;
-			interrupt-parent = < &ipic >;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
-				     "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 8>;
-			interrupt-parent = <&ipic>;
-			fsl,mpc8313-wakeup-timer = <&gtm1>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 0x0E -mini PCI */
-				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
-
-				/* IDSEL 0x0F -mini PCI */
-				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x2 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x4 &ipic 17 0x8
-
-				/* IDSEL 0x10 - PCI slot */
-				 0x8000 0x0 0x0 0x1 &ipic 48 0x8
-				 0x8000 0x0 0x0 0x2 &ipic 17 0x8
-				 0x8000 0x0 0x0 0x3 &ipic 48 0x8
-				 0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	pci1: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe0009000 0x00001000>;
-		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 1 8
-				 0 0 0 2 &ipic 1 8
-				 0 0 0 3 &ipic 1 8
-				 0 0 0 4 &ipic 1 8>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xa0000000
-				  0x02000000 0 0xa0000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	pci2: pcie@e000a000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe000a000 0x00001000>;
-		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 2 8
-				 0 0 0 2 &ipic 2 8
-				 0 0 0 3 &ipic 2 8
-				 0 0 0 4 &ipic 2 8>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xc0000000
-				  0x02000000 0 0xc0000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pwr {
-			gpios = <&mcu_pio 0 0>;
-			default-state = "on";
-		};
-
-		hdd {
-			gpios = <&mcu_pio 1 0>;
-			linux,default-trigger = "ide-disk";
-		};
-	};
-};
diff --git a/src/powerpc/mpc832x_mds.dts b/src/powerpc/mpc832x_mds.dts
deleted file mode 100644
index 0793cdf0d46e..000000000000
--- a/src/powerpc/mpc832x_mds.dts
+++ /dev/null
@@ -1,439 +0,0 @@
-/*
- * MPC8323E EMDS Device Tree Source
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
-
- * To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do
- * this:
- *
- * 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board.
- * 2) Solder a wire from U61-21 to P19A-23.  P19 is a grid of pins on the board
- *    next to the serial ports.
- * 3) Solder a wire from U61-22 to P19K-22.
- *
- * Note that there's a typo in the schematic.  The board labels the last column
- * of pins "P19K", but in the schematic, that column is called "P19J".  So if
- * you're going by the schematic, the pin is called "P19J-K22".
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC8323EMDS";
-	compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8323@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <16384>;		// L1, 16K
-			i-cache-size = <16384>;		// L1, 16K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	bcsr@f8000000 {
-		compatible = "fsl,mpc8323mds-bcsr";
-		reg = <0xf8000000 0x8000>;
-	};
-
-	soc8323@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <132000000>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <1>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x4c>;
-			fsl,descriptor-types-mask = <0x0122003f>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		ipic: pic@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-
-		par_io@1400 {
-			reg = <0x1400 0x100>;
-			device_type = "par_io";
-			num-ports = <7>;
-
-			pio3: ucc_pin@03 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					3  4  3  0  2  0  /* MDIO */
-					3  5  1  0  2  0  /* MDC */
-					0 13  2  0  1  0 	/* RX_CLK (CLK9) */
-					3 24  2  0  1  0 	/* TX_CLK (CLK10) */
-					1  0  1  0  1  0 	/* TxD0 */
-					1  1  1  0  1  0 	/* TxD1 */
-					1  2  1  0  1  0 	/* TxD2 */
-					1  3  1  0  1  0 	/* TxD3 */
-					1  4  2  0  1  0 	/* RxD0 */
-					1  5  2  0  1  0 	/* RxD1 */
-					1  6  2  0  1  0 	/* RxD2 */
-					1  7  2  0  1  0 	/* RxD3 */
-					1  8  2  0  1  0 	/* RX_ER */
-					1  9  1  0  1  0 	/* TX_ER */
-					1 10  2  0  1  0 	/* RX_DV */
-					1 11  2  0  1  0 	/* COL */
-					1 12  1  0  1  0 	/* TX_EN */
-					1 13  2  0  1  0>;	/* CRS */
-			};
-			pio4: ucc_pin@04 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					3 31  2  0  1  0 	/* RX_CLK (CLK7) */
-					3  6  2  0  1  0 	/* TX_CLK (CLK8) */
-					1 18  1  0  1  0 	/* TxD0 */
-					1 19  1  0  1  0 	/* TxD1 */
-					1 20  1  0  1  0 	/* TxD2 */
-					1 21  1  0  1  0 	/* TxD3 */
-					1 22  2  0  1  0 	/* RxD0 */
-					1 23  2  0  1  0 	/* RxD1 */
-					1 24  2  0  1  0 	/* RxD2 */
-					1 25  2  0  1  0 	/* RxD3 */
-					1 26  2  0  1  0 	/* RX_ER */
-					1 27  1  0  1  0 	/* TX_ER */
-					1 28  2  0  1  0 	/* RX_DV */
-					1 29  2  0  1  0 	/* COL */
-					1 30  1  0  1  0 	/* TX_EN */
-					1 31  2  0  1  0>;	/* CRS */
-			};
-			pio5: ucc_pin@05 {
-				pio-map = <
-				/*
-				 *    		      open       has
-				 *   port  pin  dir  drain  sel  irq
-				 */
-					2    0    1      0    2    0  /* TxD5 */
-					2    8    2      0    2    0  /* RxD5 */
-
-					2   29    2      0    0    0  /* CTS5 */
-					2   31    1      0    2    0  /* RTS5 */
-
-					2   24    2      0    0    0  /* CD */
-
-				>;
-			};
-
-		};
-	};
-
-	qe@e0100000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "qe";
-		compatible = "fsl,qe";
-		ranges = <0x0 0xe0100000 0x00100000>;
-		reg = <0xe0100000 0x480>;
-		brg-frequency = <0>;
-		bus-frequency = <198000000>;
-		fsl,qe-num-riscs = <1>;
-		fsl,qe-num-snums = <28>;
-
-		muram@10000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,qe-muram", "fsl,cpm-muram";
-			ranges = <0x0 0x00010000 0x00004000>;
-
-			data-only@0 {
-				compatible = "fsl,qe-muram-data",
-					     "fsl,cpm-muram-data";
-				reg = <0x0 0x4000>;
-			};
-		};
-
-		spi@4c0 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x4c0 0x40>;
-			interrupts = <2>;
-			interrupt-parent = <&qeic>;
-			mode = "cpu";
-		};
-
-		spi@500 {
-			cell-index = <1>;
-			compatible = "fsl,spi";
-			reg = <0x500 0x40>;
-			interrupts = <1>;
-			interrupt-parent = <&qeic>;
-			mode = "cpu";
-		};
-
-		usb@6c0 {
-			compatible = "qe_udc";
-			reg = <0x6c0 0x40 0x8b00 0x100>;
-			interrupts = <11>;
-			interrupt-parent = <&qeic>;
-			mode = "slave";
-		};
-
-		enet0: ucc@2200 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			cell-index = <3>;
-			reg = <0x2200 0x200>;
-			interrupts = <34>;
-			interrupt-parent = <&qeic>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "clk9";
-			tx-clock-name = "clk10";
-			phy-handle = <&phy3>;
-			pio-handle = <&pio3>;
-		};
-
-		enet1: ucc@3200 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			cell-index = <4>;
-			reg = <0x3200 0x200>;
-			interrupts = <35>;
-			interrupt-parent = <&qeic>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "clk7";
-			tx-clock-name = "clk8";
-			phy-handle = <&phy4>;
-			pio-handle = <&pio4>;
-		};
-
-		ucc@2400 {
-			device_type = "serial";
-			compatible = "ucc_uart";
-			cell-index = <5>;	/* The UCC number, 1-7*/
-			port-number = <0>;	/* Which ttyQEx device */
-			soft-uart;		/* We need Soft-UART */
-			reg = <0x2400 0x200>;
-			interrupts = <40>;	/* From Table 18-12 */
-			interrupt-parent = < &qeic >;
-			/*
-			 * For Soft-UART, we need to set TX to 1X, which
-			 * means specifying separate clock sources.
-			 */
-			rx-clock-name = "brg5";
-			tx-clock-name = "brg6";
-			pio-handle = < &pio5 >;
-		};
-
-
-		mdio@2320 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2320 0x18>;
-			compatible = "fsl,ucc-mdio";
-
-			phy3: ethernet-phy@03 {
-				interrupt-parent = <&ipic>;
-				interrupts = <17 0x8>;
-				reg = <0x3>;
-			};
-			phy4: ethernet-phy@04 {
-				interrupt-parent = <&ipic>;
-				interrupts = <18 0x8>;
-				reg = <0x4>;
-			};
-		};
-
-		qeic: interrupt-controller@80 {
-			interrupt-controller;
-			compatible = "fsl,qe-ic";
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			reg = <0x80 0x80>;
-			big-endian;
-			interrupts = <32 0x8 33 0x8>; //high:32 low:33
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 0x11 AD17 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x12 AD18 */
-				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x13 AD19 */
-				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
-				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
-				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x15 AD21*/
-				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
-				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
-				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
-				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x16 AD22*/
-				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
-				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
-				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x17 AD23*/
-				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
-				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
-				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
-				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x18 AD24*/
-				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
-				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
-				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
-				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xd0000000 0x0 0x00100000>;
-		clock-frequency = <0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-		sleep = <&pmc 0x00010000>;
-	};
-};
diff --git a/src/powerpc/mpc832x_rdb.dts b/src/powerpc/mpc832x_rdb.dts
deleted file mode 100644
index 91df1eb16667..000000000000
--- a/src/powerpc/mpc832x_rdb.dts
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * MPC832x RDB Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC8323ERDB";
-	compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet1;
-		ethernet1 = &enet0;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8323@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <16384>;	// L1, 16K
-			i-cache-size = <16384>;	// L1, 16K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;
-	};
-
-	soc8323@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <1>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x4c>;
-			fsl,descriptor-types-mask = <0x0122003f>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		ipic:pic@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-
-		par_io@1400 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x1400 0x100>;
-			ranges = <3 0x1448 0x18>;
-			compatible = "fsl,mpc8323-qe-pario";
-			device_type = "par_io";
-			num-ports = <7>;
-
-			qe_pio_d: gpio-controller@1448 {
-				#gpio-cells = <2>;
-				compatible = "fsl,mpc8323-qe-pario-bank";
-				reg = <3 0x18>;
-				gpio-controller;
-			};
-
-			ucc2pio:ucc_pin@02 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					3  4  3  0  2  0 	/* MDIO */
-					3  5  1  0  2  0 	/* MDC */
-					3 21  2  0  1  0 	/* RX_CLK (CLK16) */
-					3 23  2  0  1  0 	/* TX_CLK (CLK3) */
-					0 18  1  0  1  0 	/* TxD0 */
-					0 19  1  0  1  0 	/* TxD1 */
-					0 20  1  0  1  0 	/* TxD2 */
-					0 21  1  0  1  0 	/* TxD3 */
-					0 22  2  0  1  0 	/* RxD0 */
-					0 23  2  0  1  0 	/* RxD1 */
-					0 24  2  0  1  0 	/* RxD2 */
-					0 25  2  0  1  0 	/* RxD3 */
-					0 26  2  0  1  0 	/* RX_ER */
-					0 27  1  0  1  0 	/* TX_ER */
-					0 28  2  0  1  0 	/* RX_DV */
-					0 29  2  0  1  0 	/* COL */
-					0 30  1  0  1  0 	/* TX_EN */
-					0 31  2  0  1  0>;      /* CRS */
-			};
-			ucc3pio:ucc_pin@03 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0 13  2  0  1  0 	/* RX_CLK (CLK9) */
-					3 24  2  0  1  0 	/* TX_CLK (CLK10) */
-					1  0  1  0  1  0 	/* TxD0 */
-					1  1  1  0  1  0 	/* TxD1 */
-					1  2  1  0  1  0 	/* TxD2 */
-					1  3  1  0  1  0 	/* TxD3 */
-					1  4  2  0  1  0 	/* RxD0 */
-					1  5  2  0  1  0 	/* RxD1 */
-					1  6  2  0  1  0 	/* RxD2 */
-					1  7  2  0  1  0 	/* RxD3 */
-					1  8  2  0  1  0 	/* RX_ER */
-					1  9  1  0  1  0 	/* TX_ER */
-					1 10  2  0  1  0 	/* RX_DV */
-					1 11  2  0  1  0 	/* COL */
-					1 12  1  0  1  0 	/* TX_EN */
-					1 13  2  0  1  0>;      /* CRS */
-			};
-		};
-	};
-
-	qe@e0100000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "qe";
-		compatible = "fsl,qe";
-		ranges = <0x0 0xe0100000 0x00100000>;
-		reg = <0xe0100000 0x480>;
-		brg-frequency = <0>;
-		bus-frequency = <198000000>;
-		fsl,qe-num-riscs = <1>;
-		fsl,qe-num-snums = <28>;
-
-		muram@10000 {
- 			#address-cells = <1>;
- 			#size-cells = <1>;
-			compatible = "fsl,qe-muram", "fsl,cpm-muram";
-			ranges = <0x0 0x00010000 0x00004000>;
-
-			data-only@0 {
-				compatible = "fsl,qe-muram-data",
-					     "fsl,cpm-muram-data";
-				reg = <0x0 0x4000>;
-			};
-		};
-
-		spi@4c0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x4c0 0x40>;
-			interrupts = <2>;
-			interrupt-parent = <&qeic>;
-			gpios = <&qe_pio_d 13 0>;
-			mode = "cpu-qe";
-
-			mmc-slot@0 {
-				compatible = "fsl,mpc8323rdb-mmc-slot",
-					     "mmc-spi-slot";
-				reg = <0>;
-				gpios = <&qe_pio_d 14 1
-					 &qe_pio_d 15 0>;
-				voltage-ranges = <3300 3300>;
-				spi-max-frequency = <50000000>;
-			};
-		};
-
-		spi@500 {
-			cell-index = <1>;
-			compatible = "fsl,spi";
-			reg = <0x500 0x40>;
-			interrupts = <1>;
-			interrupt-parent = <&qeic>;
-			mode = "cpu";
-		};
-
-		enet0: ucc@3000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			cell-index = <2>;
-			reg = <0x3000 0x200>;
-			interrupts = <33>;
-			interrupt-parent = <&qeic>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "clk16";
-			tx-clock-name = "clk3";
-			phy-handle = <&phy00>;
-			pio-handle = <&ucc2pio>;
-		};
-
-		enet1: ucc@2200 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			cell-index = <3>;
-			reg = <0x2200 0x200>;
-			interrupts = <34>;
-			interrupt-parent = <&qeic>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "clk9";
-			tx-clock-name = "clk10";
-			phy-handle = <&phy04>;
-			pio-handle = <&ucc3pio>;
-		};
-
-		mdio@3120 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3120 0x18>;
-			compatible = "fsl,ucc-mdio";
-
-			phy00:ethernet-phy@00 {
-				interrupt-parent = <&ipic>;
-				interrupts = <0>;
-				reg = <0x0>;
-			};
-			phy04:ethernet-phy@04 {
-				interrupt-parent = <&ipic>;
-				interrupts = <0>;
-				reg = <0x4>;
-			};
-		};
-
-		qeic:interrupt-controller@80 {
-			interrupt-controller;
-			compatible = "fsl,qe-ic";
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			reg = <0x80 0x80>;
-			big-endian;
-			interrupts = <32 0x8 33 0x8>; //high:32 low:33
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 0x10 AD16 (USB) */
-				 0x8000 0x0 0x0 0x1 &ipic 17 0x8
-
-				/* IDSEL 0x11 AD17 (Mini1)*/
-				 0x8800 0x0 0x0 0x1 &ipic 18 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 19 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 48 0x8
-
-				/* IDSEL 0x12 AD18 (PCI/Mini2) */
-				 0x9000 0x0 0x0 0x1 &ipic 19 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 48 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
-
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
-		clock-frequency = <0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-		sleep = <&pmc 0x00010000>;
-	};
-};
diff --git a/src/powerpc/mpc8349emitx.dts b/src/powerpc/mpc8349emitx.dts
deleted file mode 100644
index cf8542401a3c..000000000000
--- a/src/powerpc/mpc8349emitx.dts
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * MPC8349E-mITX Device Tree Source
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC8349EMITX";
-	compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8349@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	soc8349@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;                    // from bootloader
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		gpio1: gpio-controller@c00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8349-gpio";
-			reg = <0xc00 0x100>;
-			interrupts = <74 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		gpio2: gpio-controller@d00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8349-gpio";
-			reg = <0xd00 0x100>;
-			interrupts = <75 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-
-			eeprom: at24@50 {
-				compatible = "st-micro,24c256";
-				reg = <0x50>;
-			};
-
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-				interrupts = <18 0x8>;
-				interrupt-parent = <&ipic>;
-			};
-
-			pcf1: iexp@38 {
-				#gpio-cells = <2>;
-				compatible = "ti,pcf8574a";
-				reg = <0x38>;
-				gpio-controller;
-			};
-
-			pcf2: iexp@39 {
-				#gpio-cells = <2>;
-				compatible = "ti,pcf8574a";
-				reg = <0x39>;
-				gpio-controller;
-			};
-
-			spd: at24@51 {
-				compatible = "at24,spd";
-				reg = <0x51>;
-			};
-
-			mcu_pio: mcu@a {
-				#gpio-cells = <2>;
-				compatible = "fsl,mc9s08qg8-mpc8349emitx",
-					     "fsl,mcu-mpc8349emitx";
-				reg = <0x0a>;
-				gpio-controller;
-			};
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@22000 {
-			compatible = "fsl-usb2-mph";
-			reg = <0x22000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <39 0x8>;
-			phy_type = "ulpi";
-			port0;
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "peripheral";
-			phy_type = "ulpi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy1c>;
-			linux,network-index = <0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				/* Vitesse 8201 */
-				phy1c: ethernet-phy@1c {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x1c>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			interrupt-parent = <&ipic>;
-			/* Vitesse 7385 isn't on the MDIO bus */
-			fixed-link = <1 1 1000 0 0>;
-			linux,network-index = <1>;
-			tbi-handle = <&tbi1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;		// from bootloader
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;		// from bootloader
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		ipic: pic@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			green {
-				label = "Green";
-				gpios = <&pcf1 0 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&pcf1 1 1>;
-				/* linux,default-trigger = "heartbeat"; */
-				default-state = "on";
-			};
-		};
-
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 0x10 - SATA */
-				0x8000 0x0 0x0 0x1 &ipic 22 0x8 /* SATA_INTA */
-				>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	pci1: pci@e0008600 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 0x0E - MiniPCI Slot */
-				0x7000 0x0 0x0 0x1 &ipic 21 0x8 /* PCI_INTA */
-
-				/* IDSEL 0x0F - PCI Slot */
-				0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */
-				0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */
-				>;
-		interrupt-parent = <&ipic>;
-		interrupts = <67 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008600 0x100		/* internal registers */
-		       0xe0008380 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8349e-localbus",
-			     "fsl,pq2pro-localbus",
-			     "simple-bus";
-		reg = <0xe0005000 0xd8>;
-		ranges = <0x0 0x0 0xfe000000 0x1000000	/* flash */
-			  0x1 0x0 0xf8000000 0x20000	/* VSC 7385 */
-			  0x2 0x0 0xf9000000 0x200000	/* exp slot */
-			  0x3 0x0 0xf0000000 0x210>;	/* CF slot */
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0x0      0x0 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		flash@0,800000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x800000 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		pata@3,0 {
-			compatible = "fsl,mpc8349emitx-pata", "ata-generic";
-			reg = <0x3 0x0 0x10 0x3 0x20c 0x4>;
-			reg-shift = <1>;
-			pio-mode = <6>;
-			interrupts = <23 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-};
diff --git a/src/powerpc/mpc8349emitxgp.dts b/src/powerpc/mpc8349emitxgp.dts
deleted file mode 100644
index f00066dcc8de..000000000000
--- a/src/powerpc/mpc8349emitxgp.dts
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * MPC8349E-mITX-GP Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC8349EMITXGP";
-	compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8349@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	soc8349@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;                    // from bootloader
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-				interrupts = <18 0x8>;
-				interrupt-parent = <&ipic>;
-			};
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "otg";
-			phy_type = "ulpi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy1c>;
-			linux,network-index = <0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				/* Vitesse 8201 */
-				phy1c: ethernet-phy@1c {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x1c>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;		// from bootloader
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;		// from bootloader
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		ipic: pic@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-	};
-
-	pci0: pci@e0008600 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 0x0F - PCI Slot */
-				0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */
-				0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */
-				 >;
-		interrupt-parent = <&ipic>;
-		interrupts = <67 0x8>;
-		bus-range = <0x1 0x1>;
-		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008600 0x100		/* internal registers */
-		       0xe0008380 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-};
diff --git a/src/powerpc/mpc834x_mds.dts b/src/powerpc/mpc834x_mds.dts
deleted file mode 100644
index 4843c3ff7166..000000000000
--- a/src/powerpc/mpc834x_mds.dts
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * MPC8349E MDS Device Tree Source
- *
- * Copyright 2005, 2006 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC8349EMDS";
-	compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8349@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	// 256MB at 0
-	};
-
-	bcsr@e2400000 {
-		compatible = "fsl,mpc8349mds-bcsr";
-		reg = <0xe2400000 0x8000>;
-	};
-
-	soc8349@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		/* phy type (ULPI or SERIAL) are only types supported for MPH */
-		/* port = 0 or 1 */
-		usb@22000 {
-			compatible = "fsl-usb2-mph";
-			reg = <0x22000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <39 0x8>;
-			phy_type = "ulpi";
-			port0;
-		};
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "otg";
-			phy_type = "ulpi";
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			linux,network-index = <0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x1>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			linux,network-index = <1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x12 */
-				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x13 */
-				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
-				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
-				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x15 */
-				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
-				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
-				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
-				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x16 */
-				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
-				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
-				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x17 */
-				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
-				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
-				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
-				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x18 */
-				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
-				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
-				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
-				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	pci1: pci@e0008600 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x12 */
-				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x13 */
-				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
-				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
-				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x15 */
-				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
-				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
-				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
-				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x16 */
-				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
-				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
-				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x17 */
-				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
-				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
-				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
-				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x18 */
-				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
-				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
-				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
-				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <67 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
-			  0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008600 0x100		/* internal registers */
-		       0xe0008380 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-};
diff --git a/src/powerpc/mpc836x_mds.dts b/src/powerpc/mpc836x_mds.dts
deleted file mode 100644
index ecb6ccd3a6aa..000000000000
--- a/src/powerpc/mpc836x_mds.dts
+++ /dev/null
@@ -1,485 +0,0 @@
-/*
- * MPC8360E EMDS Device Tree Source
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-
-/*
-/memreserve/	00000000 1000000;
-*/
-
-/dts-v1/;
-
-/ {
-	model = "MPC8360MDS";
-	compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8360@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <66000000>;
-			bus-frequency = <264000000>;
-			clock-frequency = <528000000>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
-			     "simple-bus";
-		reg = <0xe0005000 0xd8>;
-		ranges = <0 0 0xfe000000 0x02000000
-		          1 0 0xf8000000 0x00008000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		bcsr@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
- 			compatible = "fsl,mpc8360mds-bcsr";
-			reg = <1 0 0x8000>;
-			ranges = <0 1 0 0x8000>;
-
-			bcsr13: gpio-controller@d {
-				#gpio-cells = <2>;
-				compatible = "fsl,mpc8360mds-bcsr-gpio";
-				reg = <0xd 1>;
-				gpio-controller;
-			};
-		};
-	};
-
-	soc8360@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <264000000>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <264000000>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <264000000>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		ipic: pic@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-
-		par_io@1400 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x1400 0x100>;
-			ranges = <0 0x1400 0x100>;
-			device_type = "par_io";
-			num-ports = <7>;
-
-			qe_pio_b: gpio-controller@18 {
-				#gpio-cells = <2>;
-				compatible = "fsl,mpc8360-qe-pario-bank",
-					     "fsl,mpc8323-qe-pario-bank";
-				reg = <0x18 0x18>;
-				gpio-controller;
-			};
-
-			pio1: ucc_pin@01 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0  3  1  0  1  0 	/* TxD0 */
-					0  4  1  0  1  0 	/* TxD1 */
-					0  5  1  0  1  0 	/* TxD2 */
-					0  6  1  0  1  0 	/* TxD3 */
-					1  6  1  0  3  0 	/* TxD4 */
-					1  7  1  0  1  0 	/* TxD5 */
-					1  9  1  0  2  0 	/* TxD6 */
-					1  10 1  0  2  0 	/* TxD7 */
-					0  9  2  0  1  0 	/* RxD0 */
-					0  10 2  0  1  0 	/* RxD1 */
-					0  11 2  0  1  0 	/* RxD2 */
-					0  12 2  0  1  0 	/* RxD3 */
-					0  13 2  0  1  0 	/* RxD4 */
-					1  1  2  0  2  0 	/* RxD5 */
-					1  0  2  0  2  0 	/* RxD6 */
-					1  4  2  0  2  0 	/* RxD7 */
-					0  7  1  0  1  0 	/* TX_EN */
-					0  8  1  0  1  0 	/* TX_ER */
-					0  15 2  0  1  0 	/* RX_DV */
-					0  16 2  0  1  0 	/* RX_ER */
-					0  0  2  0  1  0 	/* RX_CLK */
-					2  9  1  0  3  0 	/* GTX_CLK - CLK10 */
-					2  8  2  0  1  0>;	/* GTX125 - CLK9 */
-			};
-			pio2: ucc_pin@02 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0  17 1  0  1  0   /* TxD0 */
-					0  18 1  0  1  0   /* TxD1 */
-					0  19 1  0  1  0   /* TxD2 */
-					0  20 1  0  1  0   /* TxD3 */
-					1  2  1  0  1  0   /* TxD4 */
-					1  3  1  0  2  0   /* TxD5 */
-					1  5  1  0  3  0   /* TxD6 */
-					1  8  1  0  3  0   /* TxD7 */
-					0  23 2  0  1  0   /* RxD0 */
-					0  24 2  0  1  0   /* RxD1 */
-					0  25 2  0  1  0   /* RxD2 */
-					0  26 2  0  1  0   /* RxD3 */
-					0  27 2  0  1  0   /* RxD4 */
-					1  12 2  0  2  0   /* RxD5 */
-					1  13 2  0  3  0   /* RxD6 */
-					1  11 2  0  2  0   /* RxD7 */
-					0  21 1  0  1  0   /* TX_EN */
-					0  22 1  0  1  0   /* TX_ER */
-					0  29 2  0  1  0   /* RX_DV */
-					0  30 2  0  1  0   /* RX_ER */
-					0  31 2  0  1  0   /* RX_CLK */
-					2  2  1  0  2  0   /* GTX_CLK - CLK10 */
-					2  3  2  0  1  0   /* GTX125 - CLK4 */
-					0  1  3  0  2  0   /* MDIO */
-					0  2  1  0  1  0>; /* MDC */
-			};
-
-		};
-	};
-
-	qe@e0100000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "qe";
-		compatible = "fsl,qe";
-		ranges = <0x0 0xe0100000 0x00100000>;
-		reg = <0xe0100000 0x480>;
-		brg-frequency = <0>;
-		bus-frequency = <396000000>;
-		fsl,qe-num-riscs = <2>;
-		fsl,qe-num-snums = <28>;
-
-		muram@10000 {
- 			#address-cells = <1>;
- 			#size-cells = <1>;
-			compatible = "fsl,qe-muram", "fsl,cpm-muram";
-			ranges = <0x0 0x00010000 0x0000c000>;
-
-			data-only@0 {
-				compatible = "fsl,qe-muram-data",
-					     "fsl,cpm-muram-data";
-				reg = <0x0 0xc000>;
-			};
-		};
-
-		timer@440 {
-			compatible = "fsl,mpc8360-qe-gtm",
-				     "fsl,qe-gtm", "fsl,gtm";
-			reg = <0x440 0x40>;
-			clock-frequency = <132000000>;
-			interrupts = <12 13 14 15>;
-			interrupt-parent = <&qeic>;
-		};
-
-		spi@4c0 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x4c0 0x40>;
-			interrupts = <2>;
-			interrupt-parent = <&qeic>;
-			mode = "cpu";
-		};
-
-		spi@500 {
-			cell-index = <1>;
-			compatible = "fsl,spi";
-			reg = <0x500 0x40>;
-			interrupts = <1>;
-			interrupt-parent = <&qeic>;
-			mode = "cpu";
-		};
-
-		usb@6c0 {
-			compatible = "fsl,mpc8360-qe-usb",
-				     "fsl,mpc8323-qe-usb";
-			reg = <0x6c0 0x40 0x8b00 0x100>;
-			interrupts = <11>;
-			interrupt-parent = <&qeic>;
-			fsl,fullspeed-clock = "clk21";
-			fsl,lowspeed-clock = "brg9";
-			gpios = <&qe_pio_b  2 0   /* USBOE */
-				 &qe_pio_b  3 0   /* USBTP */
-				 &qe_pio_b  8 0   /* USBTN */
-				 &qe_pio_b  9 0   /* USBRP */
-				 &qe_pio_b 11 0   /* USBRN */
-				 &bcsr13    5 0   /* SPEED */
-				 &bcsr13    4 1>; /* POWER */
-		};
-
-		enet0: ucc@2000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			cell-index = <1>;
-			reg = <0x2000 0x200>;
-			interrupts = <32>;
-			interrupt-parent = <&qeic>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk9";
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-			pio-handle = <&pio1>;
-		};
-
-		enet1: ucc@3000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			cell-index = <2>;
-			reg = <0x3000 0x200>;
-			interrupts = <33>;
-			interrupt-parent = <&qeic>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk4";
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-			pio-handle = <&pio2>;
-		};
-
-		mdio@2120 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2120 0x18>;
-			compatible = "fsl,ucc-mdio";
-
-			phy0: ethernet-phy@00 {
-				interrupt-parent = <&ipic>;
-				interrupts = <17 0x8>;
-				reg = <0x0>;
-			};
-			phy1: ethernet-phy@01 {
-				interrupt-parent = <&ipic>;
-				interrupts = <18 0x8>;
-				reg = <0x1>;
-			};
-			tbi-phy@2 {
-				device_type = "tbi-phy";
-				reg = <0x2>;
-			};
-		};
-
-		qeic: interrupt-controller@80 {
-			interrupt-controller;
-			compatible = "fsl,qe-ic";
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-			reg = <0x80 0x80>;
-			big-endian;
-			interrupts = <32 0x8 33 0x8>; // high:32 low:33
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 AD17 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x12 AD18 */
-				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x13 AD19 */
-				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
-				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
-				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x15 AD21*/
-				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
-				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
-				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
-				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x16 AD22*/
-				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
-				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
-				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x17 AD23*/
-				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
-				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
-				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
-				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x18 AD24*/
-				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
-				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
-				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
-				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-		sleep = <&pmc 0x00010000>;
-	};
-};
diff --git a/src/powerpc/mpc836x_rdk.dts b/src/powerpc/mpc836x_rdk.dts
deleted file mode 100644
index daeacbdcf8b4..000000000000
--- a/src/powerpc/mpc836x_rdk.dts
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- * MPC8360E RDK Device Tree Source
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- * Copyright 2007-2008 MontaVista Software, Inc.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "fsl,mpc8360rdk";
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8360@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* filled by u-boot */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* filled by u-boot */
-		reg = <0 0>;
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
-			     "simple-bus";
-		ranges = <0 0xe0000000 0x200000>;
-		reg = <0xe0000000 0x200>;
-		/* filled by u-boot */
-		bus-frequency = <0>;
-
-		wdt@200 {
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <16 8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			interrupts = <9 8>;
-			interrupt-parent = <&ipic>;
-			/* filled by u-boot */
-			clock-frequency = <0>;
-		};
-
-		serial1: serial@4600 {
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			interrupts = <10 8>;
-			interrupt-parent = <&ipic>;
-			/* filled by u-boot */
-			clock-frequency = <0>;
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		ipic: interrupt-controller@700 {
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			compatible = "fsl,pq2pro-pic", "fsl,ipic";
-			interrupt-controller;
-			reg = <0x700 0x100>;
-		};
-
-		qe_pio_b: gpio-controller@1418 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8360-qe-pario-bank",
-				     "fsl,mpc8323-qe-pario-bank";
-			reg = <0x1418 0x18>;
-			gpio-controller;
-		};
-
-		qe_pio_e: gpio-controller@1460 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8360-qe-pario-bank",
-				     "fsl,mpc8323-qe-pario-bank";
-			reg = <0x1460 0x18>;
-			gpio-controller;
-		};
-
-		qe@100000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			device_type = "qe";
-			compatible = "fsl,qe", "simple-bus";
-			ranges = <0 0x100000 0x100000>;
-			reg = <0x100000 0x480>;
-			/* filled by u-boot */
-			clock-frequency = <0>;
-			bus-frequency = <0>;
-			brg-frequency = <0>;
-			fsl,qe-num-riscs = <2>;
-			fsl,qe-num-snums = <28>;
-
-			muram@10000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "fsl,qe-muram", "fsl,cpm-muram";
-				ranges = <0 0x10000 0xc000>;
-
-				data-only@0 {
-					compatible = "fsl,qe-muram-data",
-						     "fsl,cpm-muram-data";
-					reg = <0 0xc000>;
-				};
-			};
-
-			timer@440 {
-				compatible = "fsl,mpc8360-qe-gtm",
-					     "fsl,qe-gtm", "fsl,gtm";
-				reg = <0x440 0x40>;
-				interrupts = <12 13 14 15>;
-				interrupt-parent = <&qeic>;
-				clock-frequency = <166666666>;
-			};
-
-			usb@6c0 {
-				compatible = "fsl,mpc8360-qe-usb",
-					     "fsl,mpc8323-qe-usb";
-				reg = <0x6c0 0x40 0x8b00 0x100>;
-				interrupts = <11>;
-				interrupt-parent = <&qeic>;
-				fsl,fullspeed-clock = "clk21";
-				gpios = <&qe_pio_b  2 0 /* USBOE */
-					 &qe_pio_b  3 0 /* USBTP */
-					 &qe_pio_b  8 0 /* USBTN */
-					 &qe_pio_b  9 0 /* USBRP */
-					 &qe_pio_b 11 0 /* USBRN */
-					 &qe_pio_e 20 0 /* SPEED */
-					 &qe_pio_e 21 1 /* POWER */>;
-			};
-
-			spi@4c0 {
-				cell-index = <0>;
-				compatible = "fsl,spi";
-				reg = <0x4c0 0x40>;
-				interrupts = <2>;
-				interrupt-parent = <&qeic>;
-				mode = "cpu-qe";
-			};
-
-			spi@500 {
-				cell-index = <1>;
-				compatible = "fsl,spi";
-				reg = <0x500 0x40>;
-				interrupts = <1>;
-				interrupt-parent = <&qeic>;
-				mode = "cpu-qe";
-			};
-
-			enet0: ucc@2000 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <1>;
-				reg = <0x2000 0x200>;
-				interrupts = <32>;
-				interrupt-parent = <&qeic>;
-				rx-clock-name = "none";
-				tx-clock-name = "clk9";
-				phy-handle = <&phy2>;
-				phy-connection-type = "rgmii-rxid";
-				/* filled by u-boot */
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			enet1: ucc@3000 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <2>;
-				reg = <0x3000 0x200>;
-				interrupts = <33>;
-				interrupt-parent = <&qeic>;
-				rx-clock-name = "none";
-				tx-clock-name = "clk4";
-				phy-handle = <&phy4>;
-				phy-connection-type = "rgmii-rxid";
-				/* filled by u-boot */
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			enet2: ucc@2600 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <7>;
-				reg = <0x2600 0x200>;
-				interrupts = <42>;
-				interrupt-parent = <&qeic>;
-				rx-clock-name = "clk20";
-				tx-clock-name = "clk19";
-				phy-handle = <&phy1>;
-				phy-connection-type = "mii";
-				/* filled by u-boot */
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			enet3: ucc@3200 {
-				device_type = "network";
-				compatible = "ucc_geth";
-				cell-index = <4>;
-				reg = <0x3200 0x200>;
-				interrupts = <35>;
-				interrupt-parent = <&qeic>;
-				rx-clock-name = "clk8";
-				tx-clock-name = "clk7";
-				phy-handle = <&phy3>;
-				phy-connection-type = "mii";
-				/* filled by u-boot */
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			mdio@2120 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,ucc-mdio";
-				reg = <0x2120 0x18>;
-
-				phy1: ethernet-phy@1 {
-					compatible = "national,DP83848VV";
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					compatible = "broadcom,BCM5481UA2KMLG";
-					reg = <2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					compatible = "national,DP83848VV";
-					reg = <3>;
-				};
-
-				phy4: ethernet-phy@4 {
-					compatible = "broadcom,BCM5481UA2KMLG";
-					reg = <4>;
-				};
-			};
-
-			serial2: ucc@2400 {
-				device_type = "serial";
-				compatible = "ucc_uart";
-				reg = <0x2400 0x200>;
-				cell-index = <5>;
-				port-number = <0>;
-				rx-clock-name = "brg7";
-				tx-clock-name = "brg8";
-				interrupts = <40>;
-				interrupt-parent = <&qeic>;
-				soft-uart;
-			};
-
-			serial3: ucc@3400 {
-				device_type = "serial";
-				compatible = "ucc_uart";
-				reg = <0x3400 0x200>;
-				cell-index = <6>;
-				port-number = <1>;
-				rx-clock-name = "brg13";
-				tx-clock-name = "brg14";
-				interrupts = <41>;
-				interrupt-parent = <&qeic>;
-				soft-uart;
-			};
-
-			qeic: interrupt-controller@80 {
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-				compatible = "fsl,qe-ic";
-				interrupt-controller;
-				reg = <0x80 0x80>;
-				big-endian;
-				interrupts = <32 8 33 8>;
-				interrupt-parent = <&ipic>;
-			};
-		};
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
-			     "simple-bus";
-		reg = <0xe0005000 0xd8>;
-		ranges = <0 0 0xff800000 0x0800000
-			  1 0 0x60000000 0x0001000
-			  2 0 0x70000000 0x4000000>;
-
-		flash@0,0 {
-			compatible = "intel,PC28F640P30T85", "cfi-flash";
-			reg = <0 0 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		upm@1,0 {
-			compatible = "fsl,upm-nand";
-			reg = <1 0 1>;
-			fsl,upm-addr-offset = <16>;
-			fsl,upm-cmd-offset = <8>;
-			gpios = <&qe_pio_e 18 0>;
-
-			flash {
-				compatible = "stm,nand512-a";
-			};
-		};
-
-		display@2,0 {
-			device_type = "display";
-			compatible = "fujitsu,MB86277", "fujitsu,mint";
-			reg = <2 0 0x4000000>;
-			fujitsu,sh3;
-			little-endian;
-			/* filled by u-boot */
-			address = <0>;
-			depth = <0>;
-			width = <0>;
-			height = <0>;
-			linebytes = <0>;
-			/* linux,opened; - added by uboot */
-		};
-	};
-
-	pci0: pci@e0008500 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
-		interrupts = <66 8>;
-		interrupt-parent = <&ipic>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
-				 0xa000 0 0 1 &ipic 18 8
-				 0xa000 0 0 2 &ipic 19 8
-
-				 /* PCI1 IDSEL 0x15 AD21 */
-				 0xa800 0 0 1 &ipic 19 8
-				 0xa800 0 0 2 &ipic 20 8
-				 0xa800 0 0 3 &ipic 21 8
-				 0xa800 0 0 4 &ipic 18 8>;
-		sleep = <&pmc 0x00010000>;
-		/* filled by u-boot */
-		bus-range = <0 0>;
-		clock-frequency = <0>;
-	};
-};
diff --git a/src/powerpc/mpc8377_mds.dts b/src/powerpc/mpc8377_mds.dts
deleted file mode 100644
index c2c062e8175d..000000000000
--- a/src/powerpc/mpc8377_mds.dts
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
- * MPC8377E MDS Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "fsl,mpc8377emds";
-	compatible = "fsl,mpc8377emds","fsl,mpc837xmds";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8377@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// booting from NOR flash
-		ranges = <0 0x0 0xfe000000 0x02000000
-		          1 0x0 0xf8000000 0x00008000
-		          3 0x0 0xe0600000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			fs@100000 {
-				reg = <0x100000 0x800000>;
-			};
-
-			kernel@1d00000 {
-				reg = <0x1d00000 0x200000>;
-			};
-
-			dtb@1f00000 {
-				reg = <0x1f00000 0x100000>;
-			};
-		};
-
-		bcsr@1,0 {
-			reg = <1 0x0 0x8000>;
-			compatible = "fsl,mpc837xmds-bcsr";
-		};
-
-		nand@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8377-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <3 0x0 0x8000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x0c000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-
-				rtc@68 {
-					compatible = "dallas,ds1374";
-					reg = <0x68>;
-					interrupts = <19 0x8>;
-					interrupt-parent = <&ipic>;
-				};
-			};
-
-			sdhci@2e000 {
-				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
-				reg = <0x2e000 0x1000>;
-				interrupts = <42 0x8>;
-				interrupt-parent = <&ipic>;
-				sdhci,wp-inverted;
-				/* Filled in by U-Boot */
-				clock-frequency = <0>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "host";
-			phy_type = "ulpi";
-			sleep = <&pmc 0x00c00000>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0xc0000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x3>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy3>;
-			sleep = <&pmc 0x30000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <0x47 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <0x47 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <0x47 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <0x47 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <0x47 8>;
-			};
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x000000c0>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x00000030>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x12 */
-				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x13 */
-				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
-				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
-				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x15 */
-				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
-				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
-				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
-				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x16 */
-				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
-				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
-				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x17 */
-				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
-				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
-				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
-				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x18 */
-				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
-				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
-				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
-				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
-		sleep = <&pmc 0x00010000>;
-		clock-frequency = <0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	pci1: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe0009000 0x00001000>;
-		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
-		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 1 8
-				 0 0 0 2 &ipic 1 8
-				 0 0 0 3 &ipic 1 8
-				 0 0 0 4 &ipic 1 8>;
-		sleep = <&pmc 0x00300000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xa8000000
-				  0x02000000 0 0xa8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	pci2: pcie@e000a000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe000a000 0x00001000>;
-		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 2 8
-				 0 0 0 2 &ipic 2 8
-				 0 0 0 3 &ipic 2 8
-				 0 0 0 4 &ipic 2 8>;
-		sleep = <&pmc 0x000c0000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xc8000000
-				  0x02000000 0 0xc8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-};
diff --git a/src/powerpc/mpc8377_rdb.dts b/src/powerpc/mpc8377_rdb.dts
deleted file mode 100644
index 2b4b6532d69c..000000000000
--- a/src/powerpc/mpc8377_rdb.dts
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * MPC8377E RDB Device Tree Source
- *
- * Copyright 2007, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,mpc8377rdb";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8377@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	// 256MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// CS0 and CS1 are swapped when
-		// booting from nand, but the
-		// addresses are the same.
-		ranges = <0x0 0x0 0xfe000000 0x00800000
-		          0x1 0x0 0xe0600000 0x00008000
-		          0x2 0x0 0xf0000000 0x00020000
-		          0x3 0x0 0xfa000000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8377-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x8000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	immr@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		gpio1: gpio-controller@c00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
-			reg = <0xc00 0x100>;
-			interrupts = <74 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		gpio2: gpio-controller@d00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
-			reg = <0xd00 0x100>;
-			interrupts = <75 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x0c000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-
-				dtt@48 {
-					compatible = "national,lm75";
-					reg = <0x48>;
-				};
-
-				at24@50 {
-					compatible = "at24,24c256";
-					reg = <0x50>;
-				};
-
-				rtc@68 {
-					compatible = "dallas,ds1339";
-					reg = <0x68>;
-				};
-
-				mcu_pio: mcu@a {
-					#gpio-cells = <2>;
-					compatible = "fsl,mc9s08qg8-mpc8377erdb",
-						     "fsl,mcu-mpc8349emitx";
-					reg = <0x0a>;
-					gpio-controller;
-				};
-			};
-
-			sdhci@2e000 {
-				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
-				reg = <0x2e000 0x1000>;
-				interrupts = <42 0x8>;
-				interrupt-parent = <&ipic>;
-				sdhci,wp-inverted;
-				/* Filled in by U-Boot */
-				clock-frequency = <111111111>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			phy_type = "ulpi";
-			sleep = <&pmc 0x00c00000>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0xc0000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			fixed-link = <1 1 1000 0 0>;
-			tbi-handle = <&tbi1>;
-			sleep = <&pmc 0x30000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x000000c0>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x00000030>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: interrupt-controller@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
-
-				/* IDSEL AD14 IRQ6 inta */
-				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
-
-				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
-				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
-				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
-				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
-				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
-				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
-		sleep = <&pmc 0x00010000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	pci1: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe0009000 0x00001000>;
-		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
-		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 1 8
-				 0 0 0 2 &ipic 1 8
-				 0 0 0 3 &ipic 1 8
-				 0 0 0 4 &ipic 1 8>;
-		sleep = <&pmc 0x00300000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xa8000000
-				  0x02000000 0 0xa8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	pci2: pcie@e000a000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe000a000 0x00001000>;
-		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 2 8
-				 0 0 0 2 &ipic 2 8
-				 0 0 0 3 &ipic 2 8
-				 0 0 0 4 &ipic 2 8>;
-		sleep = <&pmc 0x000c0000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xc8000000
-				  0x02000000 0 0xc8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pwr {
-			gpios = <&mcu_pio 0 0>;
-			default-state = "on";
-		};
-
-		hdd {
-			gpios = <&mcu_pio 1 0>;
-			linux,default-trigger = "ide-disk";
-		};
-	};
-};
diff --git a/src/powerpc/mpc8377_wlan.dts b/src/powerpc/mpc8377_wlan.dts
deleted file mode 100644
index c0c790168b96..000000000000
--- a/src/powerpc/mpc8377_wlan.dts
+++ /dev/null
@@ -1,463 +0,0 @@
-/*
- * MPC8377E WLAN Device Tree Source
- *
- * Copyright 2007-2009 Freescale Semiconductor Inc.
- * Copyright 2009 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,mpc8377wlan";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8377@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-		ranges = <0x0 0x0 0xfc000000 0x04000000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x4000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				reg = <0 0x80000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@a0000 {
-				reg = <0xa0000 0x300000>;
-				label = "kernel";
-			};
-
-			partition@3a0000 {
-				reg = <0x3a0000 0x3c60000>;
-				label = "rootfs";
-			};
-		};
-	};
-
-	immr@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		gpio1: gpio-controller@c00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
-			reg = <0xc00 0x100>;
-			interrupts = <74 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		gpio2: gpio-controller@d00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
-			reg = <0xd00 0x100>;
-			interrupts = <75 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x0c000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-
-				at24@50 {
-					compatible = "at24,24c256";
-					reg = <0x50>;
-				};
-
-				rtc@68 {
-					compatible = "dallas,ds1339";
-					reg = <0x68>;
-				};
-			};
-
-			sdhci@2e000 {
-				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
-				reg = <0x2e000 0x1000>;
-				interrupts = <42 0x8>;
-				interrupt-parent = <&ipic>;
-				sdhci,wp-inverted;
-				clock-frequency = <133333333>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			phy_type = "ulpi";
-			sleep = <&pmc 0x00c00000>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0xc0000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x3>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			phy-handle = <&phy3>;
-			tbi-handle = <&tbi1>;
-			sleep = <&pmc 0x30000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x000000c0>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x00000030>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: interrupt-controller@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
-
-				/* IDSEL AD14 IRQ6 inta */
-				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
-
-				/* IDSEL AD15 IRQ5 inta */
-				 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
-		sleep = <&pmc 0x00010000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	pci1: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe0009000 0x00001000>;
-		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
-		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 1 8
-				 0 0 0 2 &ipic 1 8
-				 0 0 0 3 &ipic 1 8
-				 0 0 0 4 &ipic 1 8>;
-		sleep = <&pmc 0x00300000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xa8000000
-				  0x02000000 0 0xa8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	pci2: pcie@e000a000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe000a000 0x00001000>;
-		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 2 8
-				 0 0 0 2 &ipic 2 8
-				 0 0 0 3 &ipic 2 8
-				 0 0 0 4 &ipic 2 8>;
-		sleep = <&pmc 0x000c0000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xc8000000
-				  0x02000000 0 0xc8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-};
diff --git a/src/powerpc/mpc8378_mds.dts b/src/powerpc/mpc8378_mds.dts
deleted file mode 100644
index 1b82b77f9415..000000000000
--- a/src/powerpc/mpc8378_mds.dts
+++ /dev/null
@@ -1,493 +0,0 @@
-/*
- * MPC8378E MDS Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "fsl,mpc8378emds";
-	compatible = "fsl,mpc8378emds","fsl,mpc837xmds";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8378@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// booting from NOR flash
-		ranges = <0 0x0 0xfe000000 0x02000000
-		          1 0x0 0xf8000000 0x00008000
-		          3 0x0 0xe0600000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			fs@100000 {
-				reg = <0x100000 0x800000>;
-			};
-
-			kernel@1d00000 {
-				reg = <0x1d00000 0x200000>;
-			};
-
-			dtb@1f00000 {
-				reg = <0x1f00000 0x100000>;
-			};
-		};
-
-		bcsr@1,0 {
-			reg = <1 0x0 0x8000>;
-			compatible = "fsl,mpc837xmds-bcsr";
-		};
-
-		nand@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8378-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <3 0x0 0x8000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x0c000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-
-				rtc@68 {
-					compatible = "dallas,ds1374";
-					reg = <0x68>;
-					interrupts = <19 0x8>;
-					interrupt-parent = <&ipic>;
-				};
-			};
-
-			sdhci@2e000 {
-				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
-				reg = <0x2e000 0x1000>;
-				interrupts = <42 0x8>;
-				interrupt-parent = <&ipic>;
-				sdhci,wp-inverted;
-				/* Filled in by U-Boot */
-				clock-frequency = <0>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "host";
-			phy_type = "ulpi";
-			sleep = <&pmc 0x00c00000>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0xc0000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x3>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy3>;
-			sleep = <&pmc 0x30000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x12 */
-				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x13 */
-				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
-				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
-				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x15 */
-				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
-				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
-				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
-				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x16 */
-				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
-				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
-				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x17 */
-				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
-				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
-				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
-				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x18 */
-				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
-				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
-				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
-				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
-		clock-frequency = <0>;
-		sleep = <&pmc 0x00010000>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	pci1: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe0009000 0x00001000>;
-		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
-		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 1 8
-				 0 0 0 2 &ipic 1 8
-				 0 0 0 3 &ipic 1 8
-				 0 0 0 4 &ipic 1 8>;
-		sleep = <&pmc 0x00300000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xa8000000
-				  0x02000000 0 0xa8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	pci2: pcie@e000a000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe000a000 0x00001000>;
-		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 2 8
-				 0 0 0 2 &ipic 2 8
-				 0 0 0 3 &ipic 2 8
-				 0 0 0 4 &ipic 2 8>;
-		sleep = <&pmc 0x000c0000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xc8000000
-				  0x02000000 0 0xc8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-};
diff --git a/src/powerpc/mpc8378_rdb.dts b/src/powerpc/mpc8378_rdb.dts
deleted file mode 100644
index 74b6a535a413..000000000000
--- a/src/powerpc/mpc8378_rdb.dts
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * MPC8378E RDB Device Tree Source
- *
- * Copyright 2007, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,mpc8378rdb";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8378@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	// 256MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// CS0 and CS1 are swapped when
-		// booting from nand, but the
-		// addresses are the same.
-		ranges = <0x0 0x0 0xfe000000 0x00800000
-		          0x1 0x0 0xe0600000 0x00008000
-		          0x2 0x0 0xf0000000 0x00020000
-		          0x3 0x0 0xfa000000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8378-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x8000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	immr@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		gpio1: gpio-controller@c00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
-			reg = <0xc00 0x100>;
-			interrupts = <74 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		gpio2: gpio-controller@d00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio";
-			reg = <0xd00 0x100>;
-			interrupts = <75 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x0c000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-
-				dtt@48 {
-					compatible = "national,lm75";
-					reg = <0x48>;
-				};
-
-				at24@50 {
-					compatible = "at24,24c256";
-					reg = <0x50>;
-				};
-
-				rtc@68 {
-					compatible = "dallas,ds1339";
-					reg = <0x68>;
-				};
-
-				mcu_pio: mcu@a {
-					#gpio-cells = <2>;
-					compatible = "fsl,mc9s08qg8-mpc8378erdb",
-						     "fsl,mcu-mpc8349emitx";
-					reg = <0x0a>;
-					gpio-controller;
-				};
-			};
-
-			sdhci@2e000 {
-				compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
-				reg = <0x2e000 0x1000>;
-				interrupts = <42 0x8>;
-				interrupt-parent = <&ipic>;
-				sdhci,wp-inverted;
-				/* Filled in by U-Boot */
-				clock-frequency = <111111111>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			phy_type = "ulpi";
-			sleep = <&pmc 0x00c00000>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0xc0000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			fixed-link = <1 1 1000 0 0>;
-			tbi-handle = <&tbi1>;
-			sleep = <&pmc 0x30000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: interrupt-controller@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
-
-				/* IDSEL AD14 IRQ6 inta */
-				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
-
-				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
-				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
-				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
-				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
-				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
-				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
-		sleep = <&pmc 0x00010000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	pci1: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe0009000 0x00001000>;
-		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
-		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 1 8
-				 0 0 0 2 &ipic 1 8
-				 0 0 0 3 &ipic 1 8
-				 0 0 0 4 &ipic 1 8>;
-		sleep = <&pmc 0x00300000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xa8000000
-				  0x02000000 0 0xa8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	pci2: pcie@e000a000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie";
-		reg = <0xe000a000 0x00001000>;
-		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0 0 0 1 &ipic 2 8
-				 0 0 0 2 &ipic 2 8
-				 0 0 0 3 &ipic 2 8
-				 0 0 0 4 &ipic 2 8>;
-		sleep = <&pmc 0x000c0000>;
-		clock-frequency = <0>;
-
-		pcie@0 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			reg = <0 0 0 0 0>;
-			ranges = <0x02000000 0 0xc8000000
-				  0x02000000 0 0xc8000000
-				  0 0x10000000
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00800000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pwr {
-			gpios = <&mcu_pio 0 0>;
-			default-state = "on";
-		};
-
-		hdd {
-			gpios = <&mcu_pio 1 0>;
-			linux,default-trigger = "ide-disk";
-		};
-	};
-};
diff --git a/src/powerpc/mpc8379_mds.dts b/src/powerpc/mpc8379_mds.dts
deleted file mode 100644
index 38e5048d65d2..000000000000
--- a/src/powerpc/mpc8379_mds.dts
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * MPC8379E MDS Device Tree Source
- *
- * Copyright 2007 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "fsl,mpc8379emds";
-	compatible = "fsl,mpc8379emds","fsl,mpc837xmds";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8379@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// booting from NOR flash
-		ranges = <0 0x0 0xfe000000 0x02000000
-		          1 0x0 0xf8000000 0x00008000
-		          3 0x0 0xe0600000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			fs@100000 {
-				reg = <0x100000 0x800000>;
-			};
-
-			kernel@1d00000 {
-				reg = <0x1d00000 0x200000>;
-			};
-
-			dtb@1f00000 {
-				reg = <0x1f00000 0x100000>;
-			};
-		};
-
-		bcsr@1,0 {
-			reg = <1 0x0 0x8000>;
-			compatible = "fsl,mpc837xmds-bcsr";
-		};
-
-		nand@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8379-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <3 0x0 0x8000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x0c000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-
-				rtc@68 {
-					compatible = "dallas,ds1374";
-					reg = <0x68>;
-					interrupts = <19 0x8>;
-					interrupt-parent = <&ipic>;
-				};
-			};
-
-			sdhci@2e000 {
-				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
-				reg = <0x2e000 0x1000>;
-				interrupts = <42 0x8>;
-				interrupt-parent = <&ipic>;
-				sdhci,wp-inverted;
-				/* Filled in by U-Boot */
-				clock-frequency = <0>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "host";
-			phy_type = "ulpi";
-			sleep = <&pmc 0x00c00000>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0xc0000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&ipic>;
-					interrupts = <18 0x8>;
-					reg = <0x3>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy3>;
-			sleep = <&pmc 0x30000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x000000c0>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x00000030>;
-		};
-
-		sata@1a000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x1a000 0x1000>;
-			interrupts = <46 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x0000000c>;
-		};
-
-		sata@1b000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x1b000 0x1000>;
-			interrupts = <47 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x00000003>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x12 */
-				 0x9000 0x0 0x0 0x1 &ipic 22 0x8
-				 0x9000 0x0 0x0 0x2 &ipic 23 0x8
-				 0x9000 0x0 0x0 0x3 &ipic 20 0x8
-				 0x9000 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x13 */
-				 0x9800 0x0 0x0 0x1 &ipic 23 0x8
-				 0x9800 0x0 0x0 0x2 &ipic 20 0x8
-				 0x9800 0x0 0x0 0x3 &ipic 21 0x8
-				 0x9800 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x15 */
-				 0xa800 0x0 0x0 0x1 &ipic 20 0x8
-				 0xa800 0x0 0x0 0x2 &ipic 21 0x8
-				 0xa800 0x0 0x0 0x3 &ipic 22 0x8
-				 0xa800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL 0x16 */
-				 0xb000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xb000 0x0 0x0 0x2 &ipic 20 0x8
-				 0xb000 0x0 0x0 0x3 &ipic 21 0x8
-				 0xb000 0x0 0x0 0x4 &ipic 22 0x8
-
-				/* IDSEL 0x17 */
-				 0xb800 0x0 0x0 0x1 &ipic 22 0x8
-				 0xb800 0x0 0x0 0x2 &ipic 23 0x8
-				 0xb800 0x0 0x0 0x3 &ipic 20 0x8
-				 0xb800 0x0 0x0 0x4 &ipic 21 0x8
-
-				/* IDSEL 0x18 */
-				 0xc000 0x0 0x0 0x1 &ipic 21 0x8
-				 0xc000 0x0 0x0 0x2 &ipic 22 0x8
-				 0xc000 0x0 0x0 0x3 &ipic 23 0x8
-				 0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
-		sleep = <&pmc 0x00010000>;
-		clock-frequency = <0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-};
diff --git a/src/powerpc/mpc8379_rdb.dts b/src/powerpc/mpc8379_rdb.dts
deleted file mode 100644
index 3b5cbac85368..000000000000
--- a/src/powerpc/mpc8379_rdb.dts
+++ /dev/null
@@ -1,452 +0,0 @@
-/*
- * MPC8379E RDB Device Tree Source
- *
- * Copyright 2007, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "fsl,mpc8379rdb";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8379@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	// 256MB at 0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-
-		// CS0 and CS1 are swapped when
-		// booting from nand, but the
-		// addresses are the same.
-		ranges = <0x0 0x0 0xfe000000 0x00800000
-		          0x1 0x0 0xe0600000 0x00008000
-		          0x2 0x0 0xf0000000 0x00020000
-		          0x3 0x0 0xfa000000 0x00008000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8379-fcm-nand",
-			             "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x8000>;
-
-			u-boot@0 {
-				reg = <0x0 0x100000>;
-				read-only;
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x300000>;
-			};
-			fs@400000 {
-				reg = <0x400000 0x1c00000>;
-			};
-		};
-	};
-
-	immr@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			device_type = "watchdog";
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		gpio1: gpio-controller@c00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
-			reg = <0xc00 0x100>;
-			interrupts = <74 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		gpio2: gpio-controller@d00 {
-			#gpio-cells = <2>;
-			compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio";
-			reg = <0xd00 0x100>;
-			interrupts = <75 0x8>;
-			interrupt-parent = <&ipic>;
-			gpio-controller;
-		};
-
-		sleep-nexus {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			sleep = <&pmc 0x0c000000>;
-			ranges;
-
-			i2c@3000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				compatible = "fsl-i2c";
-				reg = <0x3000 0x100>;
-				interrupts = <14 0x8>;
-				interrupt-parent = <&ipic>;
-				dfsrr;
-
-				dtt@48 {
-					compatible = "national,lm75";
-					reg = <0x48>;
-				};
-
-				at24@50 {
-					compatible = "at24,24c256";
-					reg = <0x50>;
-				};
-
-				rtc@68 {
-					compatible = "dallas,ds1339";
-					reg = <0x68>;
-				};
-
-				mcu_pio: mcu@a {
-					#gpio-cells = <2>;
-					compatible = "fsl,mc9s08qg8-mpc8379erdb",
-						     "fsl,mcu-mpc8349emitx";
-					reg = <0x0a>;
-					gpio-controller;
-				};
-			};
-
-			sdhci@2e000 {
-				compatible = "fsl,mpc8379-esdhc", "fsl,esdhc";
-				reg = <0x2e000 0x1000>;
-				interrupts = <42 0x8>;
-				interrupt-parent = <&ipic>;
-				sdhci,wp-inverted;
-				/* Filled in by U-Boot */
-				clock-frequency = <111111111>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		usb@23000 {
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			phy_type = "ulpi";
-			sleep = <&pmc 0x00c00000>;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-			sleep = <&pmc 0xc0000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&ipic>;
-					interrupts = <17 0x8>;
-					reg = <0x2>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			phy-connection-type = "mii";
-			interrupt-parent = <&ipic>;
-			fixed-link = <1 1 1000 0 0>;
-			tbi-handle = <&tbi1>;
-			sleep = <&pmc 0x30000000>;
-			fsl,magic-packet;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-			sleep = <&pmc 0x03000000>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x000000c0>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x00000030>;
-		};
-
-		sata@1a000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x1a000 0x1000>;
-			interrupts = <46 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x0000000c>;
-		};
-
-		sata@1b000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x1b000 0x1000>;
-			interrupts = <47 0x8>;
-			interrupt-parent = <&ipic>;
-			sleep = <&pmc 0x00000003>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: interrupt-controller@700 {
-			compatible = "fsl,ipic";
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-		};
-
-		pmc: power@b00 {
-			compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
-			reg = <0xb00 0x100 0xa00 0x100>;
-			interrupts = <80 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
-
-				/* IDSEL AD14 IRQ6 inta */
-				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
-
-				/* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
-				 0x7800 0x0 0x0 0x1 &ipic 21 0x8
-				 0x7800 0x0 0x0 0x2 &ipic 22 0x8
-				 0x7800 0x0 0x0 0x4 &ipic 23 0x8
-
-				/* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
-				 0xE000 0x0 0x0 0x1 &ipic 23 0x8
-				 0xE000 0x0 0x0 0x2 &ipic 21 0x8
-				 0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
-		sleep = <&pmc 0x00010000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pwr {
-			gpios = <&mcu_pio 0 0>;
-			default-state = "on";
-		};
-
-		hdd {
-			gpios = <&mcu_pio 1 0>;
-			linux,default-trigger = "ide-disk";
-		};
-	};
-};
diff --git a/src/powerpc/mpc8536ds.dts b/src/powerpc/mpc8536ds.dts
deleted file mode 100644
index 19736222a0b9..000000000000
--- a/src/powerpc/mpc8536ds.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * MPC8536 DS Device Tree Source
- *
- * Copyright 2008, 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8536si-pre.dtsi"
-
-/ {
-	model = "fsl,mpc8536ds";
-	compatible = "fsl,mpc8536ds";
-
-	cpus {
-		#cpus = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8536@0 {
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0 0>;	// Filled by U-Boot
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
-
-		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
-			  0x2 0x0 0x0 0xffa00000 0x00040000
-			  0x3 0x0 0x0 0xffdf0000 0x00008000>;
-	};
-
-	board_soc: soc: soc@ffe00000 {
-		ranges = <0x0 0 0xffe00000 0x100000>;
-	};
-
-	pci0: pci@ffe08000 {
-		reg = <0 0xffe08000 0 0x1000>;
-		ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
-			  0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x11 J17 Slot 1 */
-			0x8800 0 0 1 &mpic 1 1 0 0
-			0x8800 0 0 2 &mpic 2 1 0 0
-			0x8800 0 0 3 &mpic 3 1 0 0
-			0x8800 0 0 4 &mpic 4 1 0 0>;
-	};
-
-	pci1: pcie@ffe09000 {
-		reg = <0 0xffe09000 0 0x1000>;
-		ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
-			  0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0x98000000
-				  0x02000000 0 0x98000000
-				  0 0x08000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
-			  0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0x90000000
-				  0x02000000 0 0x90000000
-				  0 0x08000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci3: pcie@ffe0b000 {
-		reg = <0 0xffe0b000 0 0x1000>;
-		ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
-			  0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xa0000000
-				  0x02000000 0 0xa0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00100000>;
-		};
-	};
-};
-
-/include/ "fsl/mpc8536si-post.dtsi"
-/include/ "mpc8536ds.dtsi"
diff --git a/src/powerpc/mpc8536ds.dtsi b/src/powerpc/mpc8536ds.dtsi
deleted file mode 100644
index 937ad7e46119..000000000000
--- a/src/powerpc/mpc8536ds.dtsi
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			reg = <0x0 0x03000000>;
-			label = "ramdisk-nor";
-		};
-
-		partition@3000000 {
-			reg = <0x03000000 0x00e00000>;
-			label = "diagnostic-nor";
-			read-only;
-		};
-
-		partition@3e00000 {
-			reg = <0x03e00000 0x00200000>;
-			label = "dink-nor";
-			read-only;
-		};
-
-		partition@4000000 {
-			reg = <0x04000000 0x00400000>;
-			label = "kernel-nor";
-		};
-
-		partition@4400000 {
-			reg = <0x04400000 0x03b00000>;
-			label = "fs-nor";
-		};
-
-		partition@7f00000 {
-			reg = <0x07f00000 0x00080000>;
-			label = "dtb-nor";
-		};
-
-		partition@7f80000 {
-			reg = <0x07f80000 0x00080000>;
-			label = "u-boot-nor";
-			read-only;
-		};
-	};
-
-	nand@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8536-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x2 0x0 0x40000>;
-
-		partition@0 {
-			reg = <0x0 0x02000000>;
-			label = "u-boot-nand";
-			read-only;
-		};
-
-		partition@2000000 {
-			reg = <0x02000000 0x10000000>;
-			label = "fs-nand";
-		};
-
-		partition@12000000 {
-			reg = <0x12000000 0x08000000>;
-			label = "ramdisk-nand";
-		};
-
-		partition@1a000000 {
-			reg = <0x1a000000 0x04000000>;
-			label = "kernel-nand";
-		};
-
-		partition@1e000000 {
-			reg = <0x1e000000 0x01000000>;
-			label = "dtb-nand";
-		};
-
-		partition@1f000000 {
-			reg = <0x1f000000 0x21000000>;
-			label = "empty-nand";
-		};
-	};
-
-	board-control@3,0 {
-		compatible = "fsl,mpc8536ds-fpga-pixis";
-		reg = <0x3 0x0 0x8000>;
-	};
-};
-
-&board_soc {
-	i2c@3100 {
-		rtc@68 {
-			compatible = "dallas,ds3232";
-			reg = <0x68>;
-			interrupts = <0 0x1 0 0>;
-		};
-		adt7461@4c {
-			compatible = "adi,adt7461";
-			reg = <0x4c>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <40000000>;
-			partition@u-boot {
-				label = "u-boot";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-			partition@kernel {
-				label = "kernel";
-				reg = <0x00100000 0x00500000>;
-				read-only;
-			};
-			partition@dtb {
-				label = "dtb";
-				reg = <0x00600000 0x00100000>;
-				read-only;
-			};
-			partition@fs {
-				label = "file system";
-				reg = <0x00700000 0x00900000>;
-			};
-		};
-		flash@1 {
-			compatible = "spansion,s25sl12801";
-			reg = <1>;
-			spi-max-frequency = <40000000>;
-		};
-		flash@2 {
-			compatible = "spansion,s25sl12801";
-			reg = <2>;
-			spi-max-frequency = <40000000>;
-		};
-		flash@3 {
-			compatible = "spansion,s25sl12801";
-			reg = <3>;
-			spi-max-frequency = <40000000>;
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	usb@23000 {
-		phy_type = "ulpi";
-	};
-
-	enet0: ethernet@24000 {
-		tbi-handle = <&tbi0>;
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	mdio@24520 {
-		phy0: ethernet-phy@0 {
-			interrupts = <10 0x1 0 0>;
-			reg = <0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <10 0x1 0 0>;
-			reg = <1>;
-		};
-		sgmii_phy0: sgmii-phy@0 {
-			interrupts = <6 1 0 0>;
-			reg = <0x1d>;
-		};
-		sgmii_phy1: sgmii-phy@1 {
-			interrupts = <6 1 0 0>;
-			reg = <0x1c>;
-		};
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet2: ethernet@26000 {
-		tbi-handle = <&tbi1>;
-		phy-handle = <&phy0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	mdio@26520 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,gianfar-tbi";
-		reg = <0x26520 0x20>;
-
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	usb@2b000 {
-		dr_mode = "peripheral";
-		phy_type = "ulpi";
-	};
-};
diff --git a/src/powerpc/mpc8536ds_36b.dts b/src/powerpc/mpc8536ds_36b.dts
deleted file mode 100644
index 6c723ee108cd..000000000000
--- a/src/powerpc/mpc8536ds_36b.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * MPC8536DS Device Tree Source (36-bit address map)
- *
- * Copyright 2008-2009, 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8536si-pre.dtsi"
-
-/ {
-	model = "fsl,mpc8536ds";
-	compatible = "fsl,mpc8536ds";
-
-	cpus {
-		#cpus = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8536@0 {
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0 0>;	// Filled by U-Boot
-	};
-
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
-
-		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
-			  0x2 0x0 0xf 0xffa00000 0x00040000
-			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
-	};
-
-	board_soc: soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pci@fffe08000 {
-		reg = <0xf 0xffe08000 0 0x1000>;
-		ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x11 J17 Slot 1 */
-			0x8800 0 0 1 &mpic 1 1 0 0
-			0x8800 0 0 2 &mpic 2 1 0 0
-			0x8800 0 0 3 &mpic 3 1 0 0
-			0x8800 0 0 4 &mpic 4 1 0 0>;
-	};
-
-	pci1: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0 0x1000>;
-		ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
-			  0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xf8000000
-				  0x02000000 0 0xf8000000
-				  0 0x08000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
-			  0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xf8000000
-				  0x02000000 0 0xf8000000
-				  0 0x08000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci3: pcie@fffe0b000 {
-		reg = <0xf 0xffe0b000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00100000>;
-		};
-	};
-};
-
-/include/ "fsl/mpc8536si-post.dtsi"
-/include/ "mpc8536ds.dtsi"
diff --git a/src/powerpc/mpc8540ads.dts b/src/powerpc/mpc8540ads.dts
deleted file mode 100644
index 7ce274c9a2d5..000000000000
--- a/src/powerpc/mpc8540ads.dts
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * MPC8540 ADS Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/include/ "fsl/e500v2_power_isa.dtsi"
-
-/ {
-	model = "MPC8540ADS";
-	compatible = "MPC8540ADS", "MPC85xxADS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8540@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;	//  33 MHz, from uboot
-			bus-frequency = <0>;	// 166 MHz
-			clock-frequency = <0>;	// 825 MHz, from uboot
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	soc8540@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8540-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8540-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x1>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <7 1>;
-					reg = <0x3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "FEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <41 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy3>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>; 	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-	};
-
-	pci0: pci@e0008000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x02 */
-			0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-			/* IDSEL 0x03 */
-			0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
-			0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x04 */
-			0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x05 */
-			0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x0c */
-			0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-			/* IDSEL 0x0d */
-			0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
-			0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x0e */
-			0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x0f */
-			0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x12 */
-			0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-			/* IDSEL 0x13 */
-			0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
-			0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x14 */
-			0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
-			0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
-			0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
-			0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-	};
-};
diff --git a/src/powerpc/mpc8541cds.dts b/src/powerpc/mpc8541cds.dts
deleted file mode 100644
index 4d35a3e0fb02..000000000000
--- a/src/powerpc/mpc8541cds.dts
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * MPC8541 CDS Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/include/ "fsl/e500v2_power_isa.dtsi"
-
-/ {
-	model = "MPC8541CDS";
-	compatible = "MPC8541CDS", "MPC85xxCDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8541@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;	//  33 MHz, from uboot
-			bus-frequency = <0>;	// 166 MHz
-			clock-frequency = <0>;	// 825 MHz, from uboot
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	soc8541@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8541-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8541-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x1>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>; 	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x2000 0x9000 0x1000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8541-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x10 */
-			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x11 */
-			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x12 (Slot 1) */
-			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x13 (Slot 2) */
-			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
-
-			/* IDSEL 0x14 (Slot 3) */
-			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
-			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
-			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
-			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x15 (Slot 4) */
-			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* Bus 1 (Tundra Bridge) */
-			/* IDSEL 0x12 (ISA bridge) */
-			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-
-		i8259@19000 {
-			interrupt-controller;
-			device_type = "interrupt-controller";
-			reg = <0x19000 0x0 0x0 0x0 0x1>;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			compatible = "chrp,iic";
-			interrupts = <1>;
-			interrupt-parent = <&pci0>;
-		};
-	};
-
-	pci1: pci@e0009000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0009000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-	};
-};
diff --git a/src/powerpc/mpc8544ds.dts b/src/powerpc/mpc8544ds.dts
deleted file mode 100644
index ed38874c3a36..000000000000
--- a/src/powerpc/mpc8544ds.dts
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * MPC8544 DS Device Tree Source
- *
- * Copyright 2007, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8544si-pre.dtsi"
-
-/ {
-	model = "MPC8544DS";
-	compatible = "MPC8544DS", "MPC85xxDS";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0 0>;	// Filled by U-Boot
-	};
-
-	board_lbc: lbc: localbus@e0005000 {
-		reg = <0 0xe0005000 0 0x1000>;
-
-		ranges = <0x0 0x0 0x0 0xff800000 0x800000>;
-	};
-
-	board_soc: soc: soc8544@e0000000 {
-		ranges = <0x0 0x0 0xe0000000 0x100000>;
-	};
-
-	pci0: pci@e0008000 {
-		reg = <0 0xe0008000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x11 J17 Slot 1 */
-			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x12 J16 Slot 2 */
-
-			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
-			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>;
-	};
-
-	pci1: pcie@e0009000 {
-		reg = <0x0 0xe0009000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-
-	pci2: pcie@e000a000 {
-		reg = <0x0 0xe000a000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x10000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-
-	board_pci3: pci3: pcie@e000b000 {
-		reg = <0x0 0xe000b000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000
-			  0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xb0000000
-				  0x2000000 0x0 0xb0000000
-				  0x0 0x100000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/*
- * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings
- * for interrupt-map & interrupt-map-mask
- */
-
-/include/ "fsl/mpc8544si-post.dtsi"
-/include/ "mpc8544ds.dtsi"
diff --git a/src/powerpc/mpc8544ds.dtsi b/src/powerpc/mpc8544ds.dtsi
deleted file mode 100644
index 47d986b041f6..000000000000
--- a/src/powerpc/mpc8544ds.dtsi
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * MPC8544DS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x800000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			reg = <0x0 0x10000>;
-			label = "dtb-nor";
-		};
-
-		partition@20000 {
-			reg = <0x20000 0x30000>;
-			label = "diagnostic-nor";
-			read-only;
-		};
-
-		partition@200000 {
-			reg = <0x200000 0x200000>;
-			label = "dink-nor";
-			read-only;
-		};
-
-		partition@400000 {
-			reg = <0x400000 0x380000>;
-			label = "kernel-nor";
-		};
-
-		partition@780000 {
-			reg = <0x780000 0x80000>;
-			label = "u-boot-nor";
-			read-only;
-		};
-	};
-};
-
-&board_soc {
-	enet0: ethernet@24000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	mdio@24520 {
-		phy0: ethernet-phy@0 {
-			interrupts = <10 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <10 1 0 0>;
-			reg = <0x1>;
-		};
-
-		sgmii_phy0: sgmii-phy@0 {
-			interrupts = <6 1 0 0>;
-			reg = <0x1c>;
-		};
-		sgmii_phy1: sgmii-phy@1 {
-			interrupts = <6 1 0 0>;
-			reg = <0x1d>;
-		};
-
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet2: ethernet@26000 {
-		phy-handle = <&phy1>;
-		tbi-handle = <&tbi1>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	mdio@26520 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-};
-
-&board_pci3 {
-	pcie@0 {
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-			// IDSEL 0x1c  USB
-			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
-			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
-			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
-			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
-			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
-			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-			>;
-
-
-		uli1575@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			ranges = <0x2000000 0x0 0xb0000000
-				  0x2000000 0x0 0xb0000000
-				  0x0 0x100000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-			isa@1e {
-				device_type = "isa";
-				#interrupt-cells = <2>;
-				#size-cells = <1>;
-				#address-cells = <2>;
-				reg = <0xf000 0x0 0x0 0x0 0x0>;
-				ranges = <0x1 0x0 0x1000000 0x0 0x0
-					  0x1000>;
-				interrupt-parent = <&i8259>;
-
-				i8259: interrupt-controller@20 {
-					reg = <0x1 0x20 0x2
-					       0x1 0xa0 0x2
-					       0x1 0x4d0 0x2>;
-					interrupt-controller;
-					device_type = "interrupt-controller";
-					#address-cells = <0>;
-					#interrupt-cells = <2>;
-					compatible = "chrp,iic";
-					interrupts = <9 2 0 0>;
-					interrupt-parent = <&mpic>;
-				};
-
-				i8042@60 {
-					#size-cells = <0>;
-					#address-cells = <1>;
-					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
-					interrupts = <1 3 12 3>;
-					interrupt-parent =
-						<&i8259>;
-
-					keyboard@0 {
-						reg = <0x0>;
-						compatible = "pnpPNP,303";
-					};
-
-					mouse@1 {
-						reg = <0x1>;
-						compatible = "pnpPNP,f03";
-					};
-				};
-
-				rtc@70 {
-					compatible = "pnpPNP,b00";
-					reg = <0x1 0x70 0x2>;
-				};
-
-				gpio@400 {
-					reg = <0x1 0x400 0x80>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/powerpc/mpc8548cds.dtsi b/src/powerpc/mpc8548cds.dtsi
deleted file mode 100644
index 3bc7d4711220..000000000000
--- a/src/powerpc/mpc8548cds.dtsi
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x01000000>;
-		bank-width = <2>;
-		device-width = <2>;
-
-		partition@0 {
-			reg = <0x0 0x0b00000>;
-			label = "ramdisk-nor";
-		};
-
-		partition@300000 {
-			reg = <0x0b00000 0x0400000>;
-			label = "kernel-nor";
-		};
-
-		partition@700000 {
-			reg = <0x0f00000 0x060000>;
-			label = "dtb-nor";
-		};
-
-		partition@760000 {
-			reg = <0x0f60000 0x020000>;
-			label = "env-nor";
-			read-only;
-		};
-
-		partition@780000 {
-			reg = <0x0f80000 0x080000>;
-			label = "u-boot-nor";
-			read-only;
-		};
-	};
-
-	board-control@1,0 {
-		compatible = "fsl,mpc8548cds-fpga";
-		reg = <0x1 0x0 0x1000>;
-	};
-};
-
-&board_soc {
-	i2c@3000 {
-		eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-		};
-
-		eeprom@56 {
-			compatible = "atmel,24c64";
-			reg = <0x56>;
-		};
-
-		eeprom@57 {
-			compatible = "atmel,24c64";
-			reg = <0x57>;
-		};
-	};
-
-	i2c@3100 {
-		eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-		};
-	};
-
-	enet0: ethernet@24000 {
-		tbi-handle = <&tbi0>;
-		phy-handle = <&phy0>;
-	};
-
-	mdio@24520 {
-		phy0: ethernet-phy@0 {
-			interrupts = <5 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <5 1 0 0>;
-			reg = <0x1>;
-		};
-		phy2: ethernet-phy@2 {
-			interrupts = <5 1 0 0>;
-			reg = <0x2>;
-		};
-		phy3: ethernet-phy@3 {
-			interrupts = <5 1 0 0>;
-			reg = <0x3>;
-		};
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet1: ethernet@25000 {
-		tbi-handle = <&tbi1>;
-		phy-handle = <&phy1>;
-	};
-
-	mdio@25520 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet2: ethernet@26000 {
-		tbi-handle = <&tbi2>;
-		phy-handle = <&phy2>;
-	};
-
-	mdio@26520 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet3: ethernet@27000 {
-		tbi-handle = <&tbi3>;
-		phy-handle = <&phy3>;
-	};
-
-	mdio@27520 {
-		tbi3: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-};
-
-&board_pci0 {
-	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-	interrupt-map = <
-		/* IDSEL 0x4 (PCIX Slot 2) */
-		0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-		/* IDSEL 0x5 (PCIX Slot 3) */
-		0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-		0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
-		0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
-		0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
-		/* IDSEL 0x6 (PCIX Slot 4) */
-		0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-		0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-		0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-		0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-		/* IDSEL 0x8 (PCIX Slot 5) */
-		0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-		/* IDSEL 0xC (Tsi310 bridge) */
-		0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-		/* IDSEL 0x14 (Slot 2) */
-		0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-		/* IDSEL 0x15 (Slot 3) */
-		0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-		0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
-		0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
-		0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
-		/* IDSEL 0x16 (Slot 4) */
-		0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-		0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-		0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-		0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-		/* IDSEL 0x18 (Slot 5) */
-		0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-		/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
-		0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-		0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-		0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-		0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-
-	pci_bridge@1c {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x00 (PrPMC Site) */
-			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x04 (VIA chip) */
-			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x05 (8139) */
-			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x06 (Slot 6) */
-			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDESL 0x07 (Slot 7) */
-			0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
-			0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-			0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
-
-		reg = <0xe000 0x0 0x0 0x0 0x0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		ranges = <0x2000000 0x0 0x80000000
-			  0x2000000 0x0 0x80000000
-			  0x0 0x20000000
-			  0x1000000 0x0 0x0
-			  0x1000000 0x0 0x0
-			  0x0 0x80000>;
-		clock-frequency = <33333333>;
-
-		isa@4 {
-			device_type = "isa";
-			#interrupt-cells = <2>;
-			#size-cells = <1>;
-			#address-cells = <2>;
-			reg = <0x2000 0x0 0x0 0x0 0x0>;
-			ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
-			interrupt-parent = <&i8259>;
-
-			i8259: interrupt-controller@20 {
-				interrupt-controller;
-				device_type = "interrupt-controller";
-				reg = <0x1 0x20 0x2
-				       0x1 0xa0 0x2
-				       0x1 0x4d0 0x2>;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				compatible = "chrp,iic";
-				interrupts = <0 1 0 0>;
-				interrupt-parent = <&mpic>;
-			};
-
-			rtc@70 {
-				compatible = "pnpPNP,b00";
-				reg = <0x1 0x70 0x2>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/mpc8548cds_32b.dts b/src/powerpc/mpc8548cds_32b.dts
deleted file mode 100644
index 6fd63163fc6b..000000000000
--- a/src/powerpc/mpc8548cds_32b.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * MPC8548 CDS Device Tree Source (32-bit address map)
- *
- * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8548si-pre.dtsi"
-
-/ {
-	model = "MPC8548CDS";
-	compatible = "MPC8548CDS", "MPC85xxCDS";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	board_lbc: lbc: localbus@e0005000 {
-		reg = <0 0xe0005000 0 0x1000>;
-
-		ranges = <0x0 0x0 0x0 0xff000000 0x01000000
-			  0x1 0x0 0x0 0xf8004000 0x00001000>;
-
-	};
-
-	board_soc: soc: soc8548@e0000000 {
-		ranges = <0 0x0 0xe0000000 0x100000>;
-	};
-
-	board_pci0: pci0: pci@e0008000 {
-		reg = <0 0xe0008000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-	};
-
-	pci1: pci@e0009000 {
-		reg = <0 0xe0009000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
-			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-	};
-
-	pci2: pcie@e000a000 {
-		reg = <0 0xe000a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	rio: rapidio@e00c0000 {
-		reg = <0x0 0xe00c0000 0x0 0x20000>;
-		port1 {
-			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
-		};
-	};
-};
-
-/*
- * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
- * for interrupt-map & interrupt-map-mask.
- */
-
-/include/ "fsl/mpc8548si-post.dtsi"
-/include/ "mpc8548cds.dtsi"
diff --git a/src/powerpc/mpc8548cds_36b.dts b/src/powerpc/mpc8548cds_36b.dts
deleted file mode 100644
index 10e551b11bd6..000000000000
--- a/src/powerpc/mpc8548cds_36b.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * MPC8548 CDS Device Tree Source (36-bit address map)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8548si-pre.dtsi"
-
-/ {
-	model = "MPC8548CDS";
-	compatible = "MPC8548CDS", "MPC85xxCDS";
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	board_lbc: lbc: localbus@fe0005000 {
-		reg = <0xf 0xe0005000 0 0x1000>;
-
-		ranges = <0x0 0x0 0xf 0xff000000 0x01000000
-			  0x1 0x0 0xf 0xf8004000 0x00001000>;
-
-	};
-
-	board_soc: soc: soc8548@fe0000000 {
-		ranges = <0 0xf 0xe0000000 0x100000>;
-	};
-
-	board_pci0: pci0: pci@fe0008000 {
-		reg = <0xf 0xe0008000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-	};
-
-	pci1: pci@fe0009000 {
-		reg = <0xf 0xe0009000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
-			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-	};
-
-	pci2: pcie@fe000a000 {
-		reg = <0xf 0xe000a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	rio: rapidio@fe00c0000 {
-		reg = <0xf 0xe00c0000 0x0 0x20000>;
-		port1 {
-			ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>;
-		};
-	};
-};
-
-/*
- * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
- * for interrupt-map & interrupt-map-mask.
- */
-
-/include/ "fsl/mpc8548si-post.dtsi"
-/include/ "mpc8548cds.dtsi"
diff --git a/src/powerpc/mpc8555cds.dts b/src/powerpc/mpc8555cds.dts
deleted file mode 100644
index f115f21cb0ae..000000000000
--- a/src/powerpc/mpc8555cds.dts
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * MPC8555 CDS Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/include/ "fsl/e500v2_power_isa.dtsi"
-
-/ {
-	model = "MPC8555CDS";
-	compatible = "MPC8555CDS", "MPC85xxCDS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8555@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;	//  33 MHz, from uboot
-			bus-frequency = <0>;	// 166 MHz
-			clock-frequency = <0>;	// 825 MHz, from uboot
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	soc8555@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8555-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8555-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x1>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>; 	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x2000 0x9000 0x1000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8555-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x10 */
-			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x11 */
-			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x12 (Slot 1) */
-			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x13 (Slot 2) */
-			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
-
-			/* IDSEL 0x14 (Slot 3) */
-			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
-			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
-			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
-			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x15 (Slot 4) */
-			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* Bus 1 (Tundra Bridge) */
-			/* IDSEL 0x12 (ISA bridge) */
-			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-
-		i8259@19000 {
-			interrupt-controller;
-			device_type = "interrupt-controller";
-			reg = <0x19000 0x0 0x0 0x0 0x1>;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			compatible = "chrp,iic";
-			interrupts = <1>;
-			interrupt-parent = <&pci0>;
-		};
-	};
-
-	pci1: pci@e0009000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0009000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-	};
-};
diff --git a/src/powerpc/mpc8560ads.dts b/src/powerpc/mpc8560ads.dts
deleted file mode 100644
index 0d70921d6125..000000000000
--- a/src/powerpc/mpc8560ads.dts
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * MPC8560 ADS Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/include/ "fsl/e500v2_power_isa.dtsi"
-
-/ {
-	model = "MPC8560ADS";
-	compatible = "MPC8560ADS", "MPC85xxADS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8560@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <82500000>;
-			bus-frequency = <330000000>;
-			clock-frequency = <825000000>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	soc8560@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <330000000>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8540-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8540-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <7 1>;
-					reg = <0x2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <7 1>;
-					reg = <0x3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x4000 0x9000 0x2000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8560-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-				clock-frequency = <165000000>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
-			};
-
-			serial0: serial@91a00 {
-				device_type = "serial";
-				compatible = "fsl,mpc8560-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x91a00 0x20 0x88000 0x100>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x800000>;
-				current-speed = <115200>;
-				interrupts = <40 8>;
-				interrupt-parent = <&cpmpic>;
-			};
-
-			serial1: serial@91a20 {
-				device_type = "serial";
-				compatible = "fsl,mpc8560-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x91a20 0x20 0x88100 0x100>;
-				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0x4a00000>;
-				current-speed = <115200>;
-				interrupts = <41 8>;
-				interrupt-parent = <&cpmpic>;
-			};
-
-			enet2: ethernet@91320 {
-				device_type = "network";
-				compatible = "fsl,mpc8560-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <0x16200300>;
-				interrupts = <33 8>;
-				interrupt-parent = <&cpmpic>;
-				phy-handle = <&phy2>;
-			};
-
-			enet3: ethernet@91340 {
-				device_type = "network";
-				compatible = "fsl,mpc8560-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <0x1a400300>;
-				interrupts = <34 8>;
-				interrupt-parent = <&cpmpic>;
-				phy-handle = <&phy3>;
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xe0008000 0x1000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x2 */
-				 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
-				 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
-				 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
-				 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-				/* IDSEL 0x3 */
-				 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
-				 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
-				 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
-				 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-				/* IDSEL 0x4 */
-				 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
-				 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
-				 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
-				 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-				/* IDSEL 0x5  */
-				 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
-				 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
-				 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
-				 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-				/* IDSEL 12 */
-				 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
-				 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
-				 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
-				 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-				/* IDSEL 13 */
-				 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
-				 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
-				 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
-				 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-				/* IDSEL 14*/
-				 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
-				 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
-				 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
-				 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-				/* IDSEL 15 */
-				 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
-				 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
-				 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
-				 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-				/* IDSEL 18 */
-				 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
-				 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
-				 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
-				 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-				/* IDSEL 19 */
-				 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
-				 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
-				 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
-				 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-				/* IDSEL 20 */
-				 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
-				 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
-				 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
-				 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-				/* IDSEL 21 */
-				 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
-				 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
-				 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
-				 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>;
-	};
-};
diff --git a/src/powerpc/mpc8568mds.dts b/src/powerpc/mpc8568mds.dts
deleted file mode 100644
index bead2b655b9f..000000000000
--- a/src/powerpc/mpc8568mds.dts
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * MPC8568E MDS Device Tree Source
- *
- * Copyright 2007, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8568si-pre.dtsi"
-
-/ {
-	model = "MPC8568EMDS";
-	compatible = "MPC8568EMDS", "MPC85xxMDS";
-
-	aliases {
-		pci0 = &pci0;
-		pci1 = &pci1;
-		rapidio0 = &rio;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x0>;
-	};
-
-	lbc: localbus@e0005000 {
-		reg = <0x0 0xe0005000 0x0 0x1000>;
-		ranges = <0x0 0x0 0xfe000000 0x02000000
-			  0x1 0x0 0xf8000000 0x00008000
-			  0x2 0x0 0xf0000000 0x04000000
-			  0x4 0x0 0xf8008000 0x00008000
-			  0x5 0x0 0xf8010000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x02000000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-
-		bcsr@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8568mds-bcsr";
-			reg = <1 0 0x8000>;
-			ranges = <0 1 0 0x8000>;
-
-			bcsr5: gpio-controller@11 {
-				#gpio-cells = <2>;
-				compatible = "fsl,mpc8568mds-bcsr-gpio";
-				reg = <0x5 0x1>;
-				gpio-controller;
-			};
-		};
-
-		pib@4,0 {
-			compatible = "fsl,mpc8568mds-pib";
-			reg = <4 0 0x8000>;
-		};
-
-		pib@5,0 {
-			compatible = "fsl,mpc8568mds-pib";
-			reg = <5 0 0x8000>;
-		};
-	};
-
-	soc: soc8568@e0000000 {
-		ranges = <0x0 0x0 0xe0000000 0x100000>;
-
-		i2c-sleep-nexus {
-			i2c@3000 {
-				rtc@68 {
-					compatible = "dallas,ds1374";
-					reg = <0x68>;
-					interrupts = <3 1 0 0>;
-				};
-			};
-		};
-
-		enet0: ethernet@24000 {
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-		};
-
-		mdio@24520 {
-			phy0: ethernet-phy@7 {
-				interrupts = <1 1 0 0>;
-				reg = <0x7>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupts = <2 1 0 0>;
-				reg = <0x1>;
-			};
-			phy2: ethernet-phy@2 {
-				interrupts = <1 1 0 0>;
-				reg = <0x2>;
-			};
-			phy3: ethernet-phy@3 {
-				interrupts = <2 1 0 0>;
-				reg = <0x3>;
-			};
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet1: ethernet@25000 {
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy3>;
-			sleep = <&pmc 0x00000040>;
-		};
-
-		mdio@25520 {
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		par_io@e0100 {
-			num-ports = <7>;
-
-			pio1: ucc_pin@01 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x4  0xa  0x1  0x0  0x2  0x0 	/* TxD0 */
-					0x4  0x9  0x1  0x0  0x2  0x0 	/* TxD1 */
-					0x4  0x8  0x1  0x0  0x2  0x0 	/* TxD2 */
-					0x4  0x7  0x1  0x0  0x2  0x0 	/* TxD3 */
-					0x4  0x17  0x1  0x0  0x2  0x0 	/* TxD4 */
-					0x4  0x16  0x1  0x0  0x2  0x0 	/* TxD5 */
-					0x4  0x15  0x1  0x0  0x2  0x0 	/* TxD6 */
-					0x4  0x14  0x1  0x0  0x2  0x0 	/* TxD7 */
-					0x4  0xf  0x2  0x0  0x2  0x0 	/* RxD0 */
-					0x4  0xe  0x2  0x0  0x2  0x0 	/* RxD1 */
-					0x4  0xd  0x2  0x0  0x2  0x0 	/* RxD2 */
-					0x4  0xc  0x2  0x0  0x2  0x0 	/* RxD3 */
-					0x4  0x1d  0x2  0x0  0x2  0x0 	/* RxD4 */
-					0x4  0x1c  0x2  0x0  0x2  0x0 	/* RxD5 */
-					0x4  0x1b  0x2  0x0  0x2  0x0 	/* RxD6 */
-					0x4  0x1a  0x2  0x0  0x2  0x0 	/* RxD7 */
-					0x4  0xb  0x1  0x0  0x2  0x0 	/* TX_EN */
-					0x4  0x18  0x1  0x0  0x2  0x0 	/* TX_ER */
-					0x4  0x10  0x2  0x0  0x2  0x0 	/* RX_DV */
-					0x4  0x1e  0x2  0x0  0x2  0x0 	/* RX_ER */
-					0x4  0x11  0x2  0x0  0x2  0x0 	/* RX_CLK */
-					0x4  0x13  0x1  0x0  0x2  0x0 	/* GTX_CLK */
-					0x1  0x1f  0x2  0x0  0x3  0x0>;	/* GTX125 */
-			};
-
-			pio2: ucc_pin@02 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
-					0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
-					0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
-					0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
-					0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
-					0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
-					0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
-					0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
-					0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
-					0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
-					0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
-					0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
-					0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
-					0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
-					0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
-					0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
-					0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
-					0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
-					0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
-					0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
-					0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
-					0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
-					0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
-					0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
-					0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
-			};
-		};
-	};
-
-	qe: qe@e0080000 {
-		ranges = <0x0 0x0 0xe0080000 0x40000>;
-		reg = <0x0 0xe0080000 0x0 0x480>;
-
-		spi@4c0 {
-			mode = "cpu";
-		};
-
-		spi@500 {
-			mode = "cpu";
-		};
-
-		enet2: ucc@2000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk16";
-			pio-handle = <&pio1>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		enet3: ucc@3000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk16";
-			pio-handle = <&pio2>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		mdio@2120 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2120 0x18>;
-			compatible = "fsl,ucc-mdio";
-
-			/* These are the same PHYs as on
-			 * gianfar's MDIO bus */
-			qe_phy0: ethernet-phy@07 {
-				interrupt-parent = <&mpic>;
-				interrupts = <1 1 0 0>;
-				reg = <0x7>;
-			};
-			qe_phy1: ethernet-phy@01 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1 0 0>;
-				reg = <0x1>;
-			};
-			qe_phy2: ethernet-phy@02 {
-				interrupt-parent = <&mpic>;
-				interrupts = <1 1 0 0>;
-				reg = <0x2>;
-			};
-			qe_phy3: ethernet-phy@03 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1 0 0>;
-				reg = <0x3>;
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		reg = <0x0 0xe0008000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x12 AD18 */
-			0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
-			0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
-			0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
-			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
-
-			/* IDSEL 0x13 AD19 */
-			0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
-			0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
-			0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
-	};
-
-	/* PCI Express */
-	pci1: pcie@e000a000 {
-		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
-		reg = <0x0 0xe000a000 0x0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x10000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x800000>;
-		};
-	};
-
-	rio: rapidio@e00c00000 {
-		reg = <0x0 0xe00c0000 0x0 0x20000>;
-		port1 {
-			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		green {
-			gpios = <&bcsr5 1 0>;
-		};
-
-		amber {
-			gpios = <&bcsr5 2 0>;
-		};
-
-		red {
-			gpios = <&bcsr5 3 0>;
-		};
-	};
-};
-
-/include/ "fsl/mpc8568si-post.dtsi"
diff --git a/src/powerpc/mpc8569mds.dts b/src/powerpc/mpc8569mds.dts
deleted file mode 100644
index d0dcdafa5eb2..000000000000
--- a/src/powerpc/mpc8569mds.dts
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * MPC8569E MDS Device Tree Source
- *
- * Copyright (C) 2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8569si-pre.dtsi"
-
-/ {
-	model = "MPC8569EMDS";
-	compatible = "fsl,MPC8569EMDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		ethernet5 = &enet5;
-		ethernet7 = &enet7;
-		rapidio0 = &rio;
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@e0005000 {
-		reg = <0x0 0xe0005000 0x0 0x1000>;
-
-		ranges = <0x0 0x0 0x0 0xfe000000 0x02000000
-			  0x1 0x0 0x0 0xf8000000 0x00008000
-			  0x2 0x0 0x0 0xf0000000 0x04000000
-			  0x3 0x0 0x0 0xfc000000 0x00008000
-			  0x4 0x0 0x0 0xf8008000 0x00008000
-			  0x5 0x0 0x0 0xf8010000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x02000000>;
-			bank-width = <1>;
-			device-width = <1>;
-			partition@0 {
-				label = "ramdisk";
-				reg = <0x00000000 0x01c00000>;
-			};
-			partition@1c00000 {
-				label = "kernel";
-				reg = <0x01c00000 0x002e0000>;
-			};
-			partiton@1ee0000 {
-				label = "dtb";
-				reg = <0x01ee0000 0x00020000>;
-			};
-			partition@1f00000 {
-				label = "firmware";
-				reg = <0x01f00000 0x00080000>;
-				read-only;
-			};
-			partition@1f80000 {
-				label = "u-boot";
-				reg = <0x01f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		bcsr@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8569mds-bcsr";
-			reg = <1 0 0x8000>;
-			ranges = <0 1 0 0x8000>;
-
-			bcsr17: gpio-controller@11 {
-				#gpio-cells = <2>;
-				compatible = "fsl,mpc8569mds-bcsr-gpio";
-				reg = <0x11 0x1>;
-				gpio-controller;
-			};
-		};
-
-		nand@3,0 {
-			compatible = "fsl,mpc8569-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <3 0 0x8000>;
-		};
-
-		pib@4,0 {
-			compatible = "fsl,mpc8569mds-pib";
-			reg = <4 0 0x8000>;
-		};
-
-		pib@5,0 {
-			compatible = "fsl,mpc8569mds-pib";
-			reg = <5 0 0x8000>;
-		};
-	};
-
-	soc: soc@e0000000 {
-		ranges = <0x0 0x0 0xe0000000 0x100000>;
-
-		i2c-sleep-nexus {
-			i2c@3000 {
-				rtc@68 {
-					compatible = "dallas,ds1374";
-					reg = <0x68>;
-					interrupts = <3 1 0 0>;
-				};
-			};
-		};
-
-		sdhc@2e000 {
-			status = "disabled";
-			sdhci,1-bit-only;
-			bus-width = <1>;
-		};
-
-		par_io@e0100 {
-			num-ports = <7>;
-
-			qe_pio_e: gpio-controller@80 {
-				#gpio-cells = <2>;
-				compatible = "fsl,mpc8569-qe-pario-bank",
-					     "fsl,mpc8323-qe-pario-bank";
-				reg = <0x80 0x18>;
-				gpio-controller;
-			};
-
-			qe_pio_f: gpio-controller@a0 {
-				#gpio-cells = <2>;
-				compatible = "fsl,mpc8569-qe-pario-bank",
-					     "fsl,mpc8323-qe-pario-bank";
-				reg = <0xa0 0x18>;
-				gpio-controller;
-			};
-
-			pio1: ucc_pin@01 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
-					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
-					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
-					0x0  0x0  0x1  0x0  0x3  0x0	/* ENET1_TXD0_SER1_TXD0 */
-					0x0  0x1  0x1  0x0  0x3  0x0	/* ENET1_TXD1_SER1_TXD1 */
-					0x0  0x2  0x1  0x0  0x1  0x0	/* ENET1_TXD2_SER1_TXD2 */
-					0x0  0x3  0x1  0x0  0x2  0x0	/* ENET1_TXD3_SER1_TXD3 */
-					0x0  0x6  0x2  0x0  0x3  0x0	/* ENET1_RXD0_SER1_RXD0	*/
-					0x0  0x7  0x2  0x0  0x1  0x0	/* ENET1_RXD1_SER1_RXD1	*/
-					0x0  0x8  0x2  0x0  0x2  0x0	/* ENET1_RXD2_SER1_RXD2	*/
-					0x0  0x9  0x2  0x0  0x2  0x0	/* ENET1_RXD3_SER1_RXD3	*/
-					0x0  0x4  0x1  0x0  0x2  0x0	/* ENET1_TX_EN_SER1_RTS_B */
-					0x0  0xc  0x2  0x0  0x3  0x0	/* ENET1_RX_DV_SER1_CTS_B */
-					0x2  0x8  0x2  0x0  0x1  0x0	/* ENET1_GRXCLK	*/
-					0x2  0x14 0x1  0x0  0x2  0x0>;	/* ENET1_GTXCLK	*/
-			};
-
-			pio2: ucc_pin@02 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
-					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
-					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
-					0x0  0xe  0x1  0x0  0x2  0x0	/* ENET2_TXD0_SER2_TXD0 */
-					0x0  0xf  0x1  0x0  0x2  0x0	/* ENET2_TXD1_SER2_TXD1 */
-					0x0  0x10 0x1  0x0  0x1  0x0	/* ENET2_TXD2_SER2_TXD2 */
-					0x0  0x11 0x1  0x0  0x1  0x0	/* ENET2_TXD3_SER2_TXD3 */
-					0x0  0x14 0x2  0x0  0x2  0x0	/* ENET2_RXD0_SER2_RXD0	*/
-					0x0  0x15 0x2  0x0  0x1  0x0	/* ENET2_RXD1_SER2_RXD1	*/
-					0x0  0x16 0x2  0x0  0x1  0x0	/* ENET2_RXD2_SER2_RXD2	*/
-					0x0  0x17 0x2  0x0  0x1  0x0	/* ENET2_RXD3_SER2_RXD3	*/
-					0x0  0x12 0x1  0x0  0x2  0x0	/* ENET2_TX_EN_SER2_RTS_B */
-					0x0  0x1a 0x2  0x0  0x3  0x0	/* ENET2_RX_DV_SER2_CTS_B */
-					0x2  0x3  0x2  0x0  0x1  0x0	/* ENET2_GRXCLK	*/
-					0x2  0x2 0x1  0x0  0x2  0x0>;	/* ENET2_GTXCLK	*/
-			};
-
-			pio3: ucc_pin@03 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
-					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
-					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
-					0x0  0x1d 0x1  0x0  0x2  0x0	/* ENET3_TXD0_SER3_TXD0 */
-					0x0  0x1e 0x1  0x0  0x3  0x0	/* ENET3_TXD1_SER3_TXD1 */
-					0x0  0x1f 0x1  0x0  0x2  0x0	/* ENET3_TXD2_SER3_TXD2 */
-					0x1  0x0  0x1  0x0  0x3  0x0	/* ENET3_TXD3_SER3_TXD3 */
-					0x1  0x3  0x2  0x0  0x3  0x0	/* ENET3_RXD0_SER3_RXD0	*/
-					0x1  0x4  0x2  0x0  0x1  0x0	/* ENET3_RXD1_SER3_RXD1	*/
-					0x1  0x5  0x2  0x0  0x2  0x0	/* ENET3_RXD2_SER3_RXD2	*/
-					0x1  0x6  0x2  0x0  0x3  0x0	/* ENET3_RXD3_SER3_RXD3	*/
-					0x1  0x1  0x1  0x0  0x1  0x0	/* ENET3_TX_EN_SER3_RTS_B */
-					0x1  0x9  0x2  0x0  0x3  0x0	/* ENET3_RX_DV_SER3_CTS_B */
-					0x2  0x9  0x2  0x0  0x2  0x0	/* ENET3_GRXCLK	*/
-					0x2  0x19 0x1  0x0  0x2  0x0>;	/* ENET3_GTXCLK	*/
-			};
-
-			pio4: ucc_pin@04 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
-					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
-					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
-					0x1  0xc  0x1  0x0  0x2  0x0	/* ENET4_TXD0_SER4_TXD0 */
-					0x1  0xd  0x1  0x0  0x2  0x0	/* ENET4_TXD1_SER4_TXD1 */
-					0x1  0xe  0x1  0x0  0x1  0x0	/* ENET4_TXD2_SER4_TXD2 */
-					0x1  0xf  0x1  0x0  0x2  0x0	/* ENET4_TXD3_SER4_TXD3 */
-					0x1  0x12 0x2  0x0  0x2  0x0	/* ENET4_RXD0_SER4_RXD0	*/
-					0x1  0x13 0x2  0x0  0x1  0x0	/* ENET4_RXD1_SER4_RXD1	*/
-					0x1  0x14 0x2  0x0  0x1  0x0	/* ENET4_RXD2_SER4_RXD2	*/
-					0x1  0x15 0x2  0x0  0x2  0x0	/* ENET4_RXD3_SER4_RXD3	*/
-					0x1  0x10 0x1  0x0  0x2  0x0	/* ENET4_TX_EN_SER4_RTS_B */
-					0x1  0x18 0x2  0x0  0x3  0x0	/* ENET4_RX_DV_SER4_CTS_B */
-					0x2  0x11 0x2  0x0  0x2  0x0	/* ENET4_GRXCLK	*/
-					0x2  0x18 0x1  0x0  0x2  0x0>;	/* ENET4_GTXCLK	*/
-			};
-		};
-	};
-
-	qe: qe@e0080000 {
-		ranges = <0x0 0x0 0xe0080000 0x40000>;
-		reg = <0x0 0xe0080000 0x0 0x480>;
-
-		spi@4c0 {
-			gpios = <&qe_pio_e 30 0>;
-			mode = "cpu-qe";
-
-			serial-flash@0 {
-				compatible = "stm,m25p40";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-			};
-		};
-
-		spi@500 {
-			mode = "cpu";
-		};
-
-		usb@6c0 {
-			fsl,fullspeed-clock = "clk5";
-			fsl,lowspeed-clock = "brg10";
-			gpios = <&qe_pio_f 3 0   /* USBOE */
-				 &qe_pio_f 4 0   /* USBTP */
-				 &qe_pio_f 5 0   /* USBTN */
-				 &qe_pio_f 6 0   /* USBRP */
-				 &qe_pio_f 8 0   /* USBRN */
-				 &bcsr17   1 0   /* SPEED */
-				 &bcsr17   2 0>; /* POWER */
-		};
-
-		enet0: ucc@2000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk12";
-			pio-handle = <&pio1>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&qe_phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		mdio@2120 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2120 0x18>;
-			compatible = "fsl,ucc-mdio";
-
-			qe_phy0: ethernet-phy@07 {
-				interrupt-parent = <&mpic>;
-				interrupts = <1 1 0 0>;
-				reg = <0x7>;
-			};
-			qe_phy1: ethernet-phy@01 {
-				interrupt-parent = <&mpic>;
-				interrupts = <2 1 0 0>;
-				reg = <0x1>;
-			};
-			qe_phy2: ethernet-phy@02 {
-				interrupt-parent = <&mpic>;
-				interrupts = <3 1 0 0>;
-				reg = <0x2>;
-			};
-			qe_phy3: ethernet-phy@03 {
-				interrupt-parent = <&mpic>;
-				interrupts = <4 1 0 0>;
-				reg = <0x3>;
-			};
-			qe_phy5: ethernet-phy@04 {
-				reg = <0x04>;
-			};
-			qe_phy7: ethernet-phy@06 {
-				reg = <0x6>;
-			};
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-		mdio@3520 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3520 0x18>;
-			compatible = "fsl,ucc-mdio";
-
-			tbi6: tbi-phy@15 {
-			reg = <0x15>;
-			device_type = "tbi-phy";
-			};
-		};
-		mdio@3720 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3720 0x38>;
-			compatible = "fsl,ucc-mdio";
-			tbi8: tbi-phy@17 {
-				reg = <0x17>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet2: ucc@2200 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk12";
-			pio-handle = <&pio3>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&qe_phy2>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		mdio@2320 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x2320 0x18>;
-			compatible = "fsl,ucc-mdio";
-			tbi3: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet1: ucc@3000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk17";
-			pio-handle = <&pio2>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&qe_phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		mdio@3120 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3120 0x18>;
-			compatible = "fsl,ucc-mdio";
-			tbi2: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet3: ucc@3200 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk17";
-			pio-handle = <&pio4>;
-			tbi-handle = <&tbi4>;
-			phy-handle = <&qe_phy3>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		mdio@3320 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x3320 0x18>;
-			compatible = "fsl,ucc-mdio";
-			tbi4: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet5: ucc@3400 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "none";
-			tbi-handle = <&tbi6>;
-			phy-handle = <&qe_phy5>;
-			phy-connection-type = "sgmii";
-		};
-
-		enet7: ucc@3600 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "none";
-			tbi-handle = <&tbi8>;
-			phy-handle = <&qe_phy7>;
-			phy-connection-type = "sgmii";
-		};
-	};
-
-	/* PCI Express */
-	pci1: pcie@e000a000 {
-		reg = <0x0 0xe000a000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x10000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x800000>;
-		};
-	};
-
-	rio: rapidio@e00c00000 {
-		reg = <0x0 0xe00c0000 0x0 0x20000>;
-		port1 {
-			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
-		};
-		port2 {
-			status = "disabled";
-		};
-	};
-};
-
-/include/ "fsl/mpc8569si-post.dtsi"
diff --git a/src/powerpc/mpc8572ds.dts b/src/powerpc/mpc8572ds.dts
deleted file mode 100644
index 0c9f2955deb4..000000000000
--- a/src/powerpc/mpc8572ds.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * MPC8572 DS Device Tree Source
- *
- * Copyright 2007-2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8572si-pre.dtsi"
-
-/ {
-	model = "fsl,MPC8572DS";
-	compatible = "fsl,MPC8572DS";
-
-	memory {
-		device_type = "memory";
-	};
-
-	board_lbc: lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
-
-		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
-			  0x1 0x0 0x0 0xe0000000 0x08000000
-			  0x2 0x0 0x0 0xffa00000 0x00040000
-			  0x3 0x0 0x0 0xffdf0000 0x00008000
-			  0x4 0x0 0x0 0xffa40000 0x00040000
-			  0x5 0x0 0x0 0xffa80000 0x00040000
-			  0x6 0x0 0x0 0xffac0000 0x00040000>;
-	};
-
-	board_soc: soc: soc8572@ffe00000 {
-		ranges = <0x0 0 0xffe00000 0x100000>;
-	};
-
-	board_pci0: pci0: pcie@ffe08000 {
-		reg = <0 0xffe08000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-
-	pci1: pcie@ffe09000 {
-		reg = <0 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-
-	pci2: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-};
-
-/*
- * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
- * for interrupt-map & interrupt-map-mask
- */
-
-/include/ "fsl/mpc8572si-post.dtsi"
-/include/ "mpc8572ds.dtsi"
diff --git a/src/powerpc/mpc8572ds.dtsi b/src/powerpc/mpc8572ds.dtsi
deleted file mode 100644
index 357490bb84da..000000000000
--- a/src/powerpc/mpc8572ds.dtsi
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			reg = <0x0 0x03000000>;
-			label = "ramdisk-nor";
-		};
-
-		partition@3000000 {
-			reg = <0x03000000 0x00e00000>;
-			label = "diagnostic-nor";
-			read-only;
-		};
-
-		partition@3e00000 {
-			reg = <0x03e00000 0x00200000>;
-			label = "dink-nor";
-			read-only;
-		};
-
-		partition@4000000 {
-			reg = <0x04000000 0x00400000>;
-			label = "kernel-nor";
-		};
-
-		partition@4400000 {
-			reg = <0x04400000 0x03b00000>;
-			label = "fs-nor";
-		};
-
-		partition@7f00000 {
-			reg = <0x07f00000 0x00060000>;
-			label = "dtb-nor";
-		};
-
-		partition@7f60000 {
-			reg = <0x07f60000 0x00020000>;
-			label = "env-nor";
-			read-only;
-		};
-
-		partition@7f80000 {
-			reg = <0x07f80000 0x00080000>;
-			label = "u-boot-nor";
-			read-only;
-		};
-	};
-
-	nand@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8572-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x2 0x0 0x40000>;
-
-		partition@0 {
-			reg = <0x0 0x02000000>;
-			label = "u-boot-nand";
-			read-only;
-		};
-
-		partition@2000000 {
-			reg = <0x02000000 0x10000000>;
-			label = "fs-nand";
-		};
-
-		partition@12000000 {
-			reg = <0x12000000 0x08000000>;
-			label = "ramdisk-nand";
-		};
-
-		partition@1a000000 {
-			reg = <0x1a000000 0x04000000>;
-			label = "kernel-nand";
-		};
-
-		partition@1e000000 {
-			reg = <0x1e000000 0x01000000>;
-			label = "dtb-nand";
-		};
-
-		partition@1f000000 {
-			reg = <0x1f000000 0x21000000>;
-			label = "empty-nand";
-		};
-	};
-
-	nand@4,0 {
-		compatible = "fsl,mpc8572-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x4 0x0 0x40000>;
-	};
-
-	nand@5,0 {
-		compatible = "fsl,mpc8572-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x5 0x0 0x40000>;
-	};
-
-	nand@6,0 {
-		compatible = "fsl,mpc8572-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x6 0x0 0x40000>;
-	};
-};
-
-&board_soc {
-	enet0: ethernet@24000 {
-		tbi-handle = <&tbi0>;
-		phy-handle = <&phy0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	mdio@24520 {
-		phy0: ethernet-phy@0 {
-			interrupts = <10 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <10 1 0 0>;
-			reg = <0x1>;
-		};
-		phy2: ethernet-phy@2 {
-			interrupts = <10 1 0 0>;
-			reg = <0x2>;
-		};
-		phy3: ethernet-phy@3 {
-			interrupts = <10 1 0 0>;
-			reg = <0x3>;
-		};
-
-		sgmii_phy0: sgmii-phy@0 {
-			interrupts = <6 1 0 0>;
-			reg = <0x1c>;
-		};
-		sgmii_phy1: sgmii-phy@1 {
-			interrupts = <6 1 0 0>;
-			reg = <0x1d>;
-		};
-		sgmii_phy2: sgmii-phy@2 {
-			interrupts = <7 1 0 0>;
-			reg = <0x1e>;
-		};
-		sgmii_phy3: sgmii-phy@3 {
-			interrupts = <7 1 0 0>;
-			reg = <0x1f>;
-		};
-
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	ptp_clock@24e00 {
-		fsl,tclk-period = <5>;
-		fsl,tmr-prsc = <200>;
-		fsl,tmr-add = <0xAAAAAAAB>;
-		fsl,tmr-fiper1 = <0x3B9AC9FB>;
-		fsl,tmr-fiper2 = <0x3B9AC9FB>;
-		fsl,max-adj = <499999999>;
-	};
-
-	enet1: ethernet@25000 {
-		tbi-handle = <&tbi1>;
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-
-	};
-
-	mdio@25520 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet2: ethernet@26000 {
-		tbi-handle = <&tbi2>;
-		phy-handle = <&phy2>;
-		phy-connection-type = "rgmii-id";
-
-	};
-	mdio@26520 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet3: ethernet@27000 {
-		tbi-handle = <&tbi3>;
-		phy-handle = <&phy3>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	mdio@27520 {
-		tbi3: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-};
-
-&board_pci0 {
-	pcie@0 {
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x11 func 0 - PCI slot 1 */
-			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x11 func 1 - PCI slot 1 */
-			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x11 func 2 - PCI slot 1 */
-			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x11 func 3 - PCI slot 1 */
-			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x11 func 4 - PCI slot 1 */
-			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x11 func 5 - PCI slot 1 */
-			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x11 func 6 - PCI slot 1 */
-			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x11 func 7 - PCI slot 1 */
-			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
-			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x12 func 0 - PCI slot 2 */
-			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
-			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
-
-			/* IDSEL 0x12 func 1 - PCI slot 2 */
-			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
-			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
-
-			/* IDSEL 0x12 func 2 - PCI slot 2 */
-			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
-			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
-
-			/* IDSEL 0x12 func 3 - PCI slot 2 */
-			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
-			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
-
-			/* IDSEL 0x12 func 4 - PCI slot 2 */
-			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
-			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
-
-			/* IDSEL 0x12 func 5 - PCI slot 2 */
-			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
-			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
-
-			/* IDSEL 0x12 func 6 - PCI slot 2 */
-			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
-			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
-
-			/* IDSEL 0x12 func 7 - PCI slot 2 */
-			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
-			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
-
-			// IDSEL 0x1c  USB
-			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
-			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
-			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
-			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
-			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
-			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-			>;
-
-
-		uli1575@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-			isa@1e {
-				device_type = "isa";
-				#interrupt-cells = <2>;
-				#size-cells = <1>;
-				#address-cells = <2>;
-				reg = <0xf000 0x0 0x0 0x0 0x0>;
-				ranges = <0x1 0x0 0x1000000 0x0 0x0
-					  0x1000>;
-				interrupt-parent = <&i8259>;
-
-				i8259: interrupt-controller@20 {
-					reg = <0x1 0x20 0x2
-					       0x1 0xa0 0x2
-					       0x1 0x4d0 0x2>;
-					interrupt-controller;
-					device_type = "interrupt-controller";
-					#address-cells = <0>;
-					#interrupt-cells = <2>;
-					compatible = "chrp,iic";
-					interrupts = <9 2 0 0>;
-					interrupt-parent = <&mpic>;
-				};
-
-				i8042@60 {
-					#size-cells = <0>;
-					#address-cells = <1>;
-					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
-					interrupts = <1 3 12 3>;
-					interrupt-parent =
-						<&i8259>;
-
-					keyboard@0 {
-						reg = <0x0>;
-						compatible = "pnpPNP,303";
-					};
-
-					mouse@1 {
-						reg = <0x1>;
-						compatible = "pnpPNP,f03";
-					};
-				};
-
-				rtc@70 {
-					compatible = "pnpPNP,b00";
-					reg = <0x1 0x70 0x2>;
-				};
-
-				gpio@400 {
-					reg = <0x1 0x400 0x80>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/powerpc/mpc8572ds_36b.dts b/src/powerpc/mpc8572ds_36b.dts
deleted file mode 100644
index 6c3d0b305e1b..000000000000
--- a/src/powerpc/mpc8572ds_36b.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * MPC8572DS Device Tree Source (36-bit address map)
- *
- * Copyright 2007-2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8572si-pre.dtsi"
-
-/ {
-	model = "fsl,MPC8572DS";
-	compatible = "fsl,MPC8572DS";
-
-	memory {
-		device_type = "memory";
-	};
-
-	board_lbc: lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
-
-		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
-			  0x1 0x0 0xf 0xe0000000 0x08000000
-			  0x2 0x0 0xf 0xffa00000 0x00040000
-			  0x3 0x0 0xf 0xffdf0000 0x00008000
-			  0x4 0x0 0xf 0xffa40000 0x00040000
-			  0x5 0x0 0xf 0xffa80000 0x00040000
-			  0x6 0x0 0xf 0xffac0000 0x00040000>;
-	};
-
-	board_soc: soc: soc8572@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	board_pci0: pci0: pcie@fffe08000 {
-		reg = <0xf 0xffe08000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-
-	pci1: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-
-	pci2: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-};
-
-/*
- * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
- * for interrupt-map & interrupt-map-mask
- */
-
-/include/ "fsl/mpc8572si-post.dtsi"
-/include/ "mpc8572ds.dtsi"
diff --git a/src/powerpc/mpc8572ds_camp_core0.dts b/src/powerpc/mpc8572ds_camp_core0.dts
deleted file mode 100644
index ef9ef56b3eeb..000000000000
--- a/src/powerpc/mpc8572ds_camp_core0.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * MPC8572 DS Core0 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0,
- * eth1, crypto, pci0, pci1.
- *
- * Copyright 2007-2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc8572ds.dts"
-
-/ {
-	model = "fsl,MPC8572DS";
-	compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
-
-	cpus {
-		PowerPC,8572@0 {
-		};
-		PowerPC,8572@1 {
-			status = "disabled";
-		};
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc8572@ffe00000 {
-		serial@4600 {
-			status = "disabled";
-		};
-		dma@c300 {
-			status = "disabled";
-		};
-		gpio-controller@f000 {
-		};
-		l2-cache-controller@20000 {
-			cache-size = <0x80000>;	// L2, 512K
-		};
-		ethernet@26000 {
-			status = "disabled";
-		};
-		mdio@26520 {
-			status = "disabled";
-		};
-		ethernet@27000 {
-			status = "disabled";
-		};
-		mdio@27520 {
-			status = "disabled";
-		};
-		pic@40000 {
-			protected-sources = <
-			31 32 33 37 38 39       /* enet2 enet3 */
-			76 77 78 79 26 42	/* dma2 pci2 serial*/
-			0xe4 0xe5 0xe6 0xe7	/* msi */
-			>;
-		};
-
-		msi@41600 {
-			msi-available-ranges = <0 0x80>;
-			interrupts = <
-				0xe0 0 0 0
-				0xe1 0 0 0
-				0xe2 0 0 0
-				0xe3 0 0 0>;
-		};
-		timer@42100 {
-			status = "disabled";
-		};
-	};
-	pcie@ffe0a000 {
-		status = "disabled";
-	};
-};
diff --git a/src/powerpc/mpc8572ds_camp_core1.dts b/src/powerpc/mpc8572ds_camp_core1.dts
deleted file mode 100644
index 24564ee108e5..000000000000
--- a/src/powerpc/mpc8572ds_camp_core1.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * MPC8572 DS Core1 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts allows core1 to have l2, dma2, eth2, eth3, pci2, msi.
- *
- * Please note to add "-b 1" for core1's dts compiling.
- *
- * Copyright 2007-2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc8572ds.dts"
-
-/ {
-	model = "fsl,MPC8572DS";
-	compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
-
-	cpus {
-		PowerPC,8572@0 {
-			status = "disabled";
-		};
-		PowerPC,8572@1 {
-		};
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc8572@ffe00000 {
-		ecm-law@0 {
-			status = "disabled";
-		};
-		ecm@1000 {
-			status = "disabled";
-		};
-		memory-controller@2000 {
-			status = "disabled";
-		};
-		memory-controller@6000 {
-			status = "disabled";
-		};
-		i2c@3000 {
-			status = "disabled";
-		};
-		i2c@3100 {
-			status = "disabled";
-		};
-		serial@4500 {
-			status = "disabled";
-		};
-		gpio-controller@f000 {
-			status = "disabled";
-		};
-		l2-cache-controller@20000 {
-			cache-size = <0x80000>;	// L2, 512K
-		};
-		dma@21300 {
-			status = "disabled";
-		};
-		ethernet@24000 {
-			status = "disabled";
-		};
-		ptp_clock@24e00 {
-			status = "disabled";
-		};
-		ethernet@25000 {
-			status = "disabled";
-		};
-		mdio@25520 {
-			status = "disabled";
-		};
-		crypto@30000 {
-			status = "disabled";
-		};
-		pic@40000 {
-			protected-sources = <
-			18 16 10 42 45 58	/* MEM L2 mdio serial crypto */
-			29 30 34 35 36 40	/* enet0 enet1 */
-			24 25 20 21 22 23	/* pci0 pci1 dma1 */
-			43			/* i2c */
-			0x1 0x2 0x3 0x4         /* pci slot */
-			0x9 0xa 0xb 0xc         /* usb */
-			0x6 0x7 0xe 0x5         /* Audio elgacy SATA */
-			0xe0 0xe1 0xe2 0xe3	/* msi */
-			>;
-		};
-		timer@41100 {
-			status = "disabled";
-		};
-		msi@41600 {
-			msi-available-ranges = <0x80 0x80>;
-			interrupts = <
-				0xe4 0 0 0
-				0xe5 0 0 0
-				0xe6 0 0 0
-				0xe7 0 0 0>;
-		};
-		global-utilities@e0000 {
-			status = "disabled";
-		};
-	};
-	pcie@ffe08000 {
-		status = "disabled";
-	};
-	pcie@ffe09000 {
-		status = "disabled";
-	};
-};
diff --git a/src/powerpc/mpc8610_hpcd.dts b/src/powerpc/mpc8610_hpcd.dts
deleted file mode 100644
index 6a109a0ceac9..000000000000
--- a/src/powerpc/mpc8610_hpcd.dts
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * MPC8610 HPCD Device Tree Source
- *
- * Copyright 2007-2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under the terms of the GNU General Public License Version 2 as published
- * by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC8610HPCD";
-	compatible = "fsl,MPC8610HPCD";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8610@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;		// L1
-			i-cache-size = <32768>;		// L1
-			sleep = <&pmc 0x00008000 0	// core
-				 &pmc 0x00004000 0>;	// timebase
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512M at 0x0
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-		ranges = <0 0 0xf8000000 0x08000000
-			  1 0 0xf0000000 0x08000000
-			  2 0 0xe8400000 0x00008000
-			  4 0 0xe8440000 0x00008000
-			  5 0 0xe8480000 0x00008000
-			  6 0 0xe84c0000 0x00008000
-			  3 0 0xe8000000 0x00000020>;
-		sleep = <&pmc 0x08000000 0>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		flash@1,0 {
-			compatible = "cfi-flash";
-			reg = <1 0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		flash@2,0 {
-			compatible = "fsl,mpc8610-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <2 0 0x8000>;
-		};
-
-		flash@4,0 {
-			compatible = "fsl,mpc8610-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <4 0 0x8000>;
-		};
-
-		flash@5,0 {
-			compatible = "fsl,mpc8610-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <5 0 0x8000>;
-		};
-
-		flash@6,0 {
-			compatible = "fsl,mpc8610-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <6 0 0x8000>;
-		};
-
-		board-control@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,fpga-pixis";
-			reg = <3 0 0x20>;
-			ranges = <0 3 0 0x20>;
-			interrupt-parent = <&mpic>;
-			interrupts = <8 8>;
-
-			sdcsr_pio: gpio-controller@a {
-				#gpio-cells = <2>;
-				compatible = "fsl,fpga-pixis-gpio-bank";
-				reg = <0xa 1>;
-				gpio-controller;
-			};
-		};
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		device_type = "soc";
-		compatible = "fsl,mpc8610-immr", "simple-bus";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		bus-frequency = <0>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8610-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			cs4270:codec@4f {
-				compatible = "cirrus,cs4270";
-				reg = <0x4f>;
-				/* MCLK source is a stand-alone oscillator */
-				clock-frequency = <12288000>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			sleep = <&pmc 0x00000004 0>;
-			dfsrr;
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-			sleep = <&pmc 0x00000002 0>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-			sleep = <&pmc 0x00000008 0>;
-		};
-
-		spi@7000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc8610-spi", "fsl,spi";
-			reg = <0x7000 0x40>;
-			cell-index = <0>;
-			interrupts = <59 2>;
-			interrupt-parent = <&mpic>;
-			mode = "cpu";
-			gpios = <&sdcsr_pio 7 0>;
-			sleep = <&pmc 0x00000800 0>;
-
-			mmc-slot@0 {
-				compatible = "fsl,mpc8610hpcd-mmc-slot",
-					     "mmc-spi-slot";
-				reg = <0>;
-				gpios = <&sdcsr_pio 0 1   /* nCD */
-					 &sdcsr_pio 1 0>; /*  WP */
-				voltage-ranges = <3300 3300>;
-				spi-max-frequency = <50000000>;
-			};
-		};
-
-		display@2c000 {
-			compatible = "fsl,diu";
-			reg = <0x2c000 100>;
-			interrupts = <72 2>;
-			interrupt-parent = <&mpic>;
-			sleep = <&pmc 0x04000000 0>;
-		};
-
-		mpic: interrupt-controller@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8610-guts";
-			reg = <0xe0000 0x1000>;
-			ranges = <0 0xe0000 0x1000>;
-			fsl,has-rstcr;
-
-			pmc: power@70 {
-				compatible = "fsl,mpc8610-pmc",
-					     "fsl,mpc8641d-pmc";
-				reg = <0x70 0x20>;
-			};
-		};
-
-		wdt@e4000 {
-			compatible = "fsl,mpc8610-wdt";
-			reg = <0xe4000 0x100>;
-		};
-
-		ssi@16000 {
-			compatible = "fsl,mpc8610-ssi";
-			cell-index = <0>;
-			reg = <0x16000 0x100>;
-			interrupt-parent = <&mpic>;
-			interrupts = <62 2>;
-			fsl,mode = "i2s-slave";
-			codec-handle = <&cs4270>;
-			fsl,playback-dma = <&dma00>;
-			fsl,capture-dma = <&dma01>;
-			fsl,fifo-depth = <8>;
-			sleep = <&pmc 0 0x08000000>;
-		};
-
-		ssi@16100 {
-			compatible = "fsl,mpc8610-ssi";
-			status = "disabled";
-			cell-index = <1>;
-			reg = <0x16100 0x100>;
-			interrupt-parent = <&mpic>;
-			interrupts = <63 2>;
-			fsl,fifo-depth = <8>;
-			sleep = <&pmc 0 0x04000000>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
-			cell-index = <0>;
-			reg = <0x21300 0x4>; /* DMA general status register */
-			ranges = <0x0 0x21100 0x200>;
-			sleep = <&pmc 0x00000400 0>;
-
-			dma00: dma-channel@0 {
-				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,ssi-dma-channel";
-				cell-index = <0>;
-				reg = <0x0 0x80>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma01: dma-channel@1 {
-				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,ssi-dma-channel";
-				cell-index = <1>;
-				reg = <0x80 0x80>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@2 {
-				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,eloplus-dma-channel";
-				cell-index = <2>;
-				reg = <0x100 0x80>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@3 {
-				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,eloplus-dma-channel";
-				cell-index = <3>;
-				reg = <0x180 0x80>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
-			cell-index = <1>;
-			reg = <0xc300 0x4>; /* DMA general status register */
-			ranges = <0x0 0xc100 0x200>;
-			sleep = <&pmc 0x00000200 0>;
-
-			dma-channel@0 {
-				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,eloplus-dma-channel";
-				cell-index = <0>;
-				reg = <0x0 0x80>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@1 {
-				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,eloplus-dma-channel";
-				cell-index = <1>;
-				reg = <0x80 0x80>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@2 {
-				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,eloplus-dma-channel";
-				cell-index = <2>;
-				reg = <0x100 0x80>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@3 {
-				compatible = "fsl,mpc8610-dma-channel",
-					"fsl,eloplus-dma-channel";
-				cell-index = <3>;
-				reg = <0x180 0x80>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
-	};
-
-	pci0: pci@e0008000 {
-		compatible = "fsl,mpc8610-pci";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
-		sleep = <&pmc 0x80000000 0>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x11 */
-			0x8800 0 0 1 &mpic 4 1
-			0x8800 0 0 2 &mpic 5 1
-			0x8800 0 0 3 &mpic 6 1
-			0x8800 0 0 4 &mpic 7 1
-
-			/* IDSEL 0x12 */
-			0x9000 0 0 1 &mpic 5 1
-			0x9000 0 0 2 &mpic 6 1
-			0x9000 0 0 3 &mpic 7 1
-			0x9000 0 0 4 &mpic 4 1
-			>;
-	};
-
-	pci1: pcie@e000a000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe000a000 0x1000>;
-		bus-range = <1 3>;
-		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
-		sleep = <&pmc 0x40000000 0>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-
-		interrupt-map = <
-			/* IDSEL 0x1b */
-			0xd800 0 0 1 &mpic 2 1
-
-			/* IDSEL 0x1c*/
-			0xe000 0 0 1 &mpic 1 1
-			0xe000 0 0 2 &mpic 1 1
-			0xe000 0 0 3 &mpic 1 1
-			0xe000 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x1f */
-			0xf800 0 0 1 &mpic 3 2
-			0xf800 0 0 2 &mpic 0 1
-		>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xa0000000
-				  0x02000000 0x0 0xa0000000
-				  0x0 0x10000000
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00100000>;
-			uli1575@0 {
-				reg = <0 0 0 0 0>;
-				#size-cells = <2>;
-				#address-cells = <3>;
-				ranges = <0x02000000 0x0 0xa0000000
-					  0x02000000 0x0 0xa0000000
-					  0x0 0x10000000
-					  0x01000000 0x0 0x00000000
-					  0x01000000 0x0 0x00000000
-					  0x0 0x00100000>;
-
-				isa@1e {
-					device_type = "isa";
-					#size-cells = <1>;
-					#address-cells = <2>;
-					reg = <0xf000 0 0 0 0>;
-					ranges = <1 0 0x01000000 0 0
-						  0x00001000>;
-
-					rtc@70 {
-						compatible = "pnpPNP,b00";
-						reg = <1 0x70 2>;
-					};
-				};
-			};
-		};
-	};
-
-	pci2: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8641-pcie";
-		reg = <0xe0009000 0x00001000>;
-		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0000 0 0 1 &mpic 4 1
-				 0x0000 0 0 2 &mpic 5 1
-				 0x0000 0 0 3 &mpic 6 1
-				 0x0000 0 0 4 &mpic 7 1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		sleep = <&pmc 0x20000000 0>;
-		clock-frequency = <33333333>;
-	};
-};
diff --git a/src/powerpc/mpc8641_hpcn.dts b/src/powerpc/mpc8641_hpcn.dts
deleted file mode 100644
index 1c03060dd0b8..000000000000
--- a/src/powerpc/mpc8641_hpcn.dts
+++ /dev/null
@@ -1,663 +0,0 @@
-/*
- * MPC8641 HPCN Device Tree Source
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC8641HPCN";
-	compatible = "fsl,mpc8641hpcn";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;		// L1
-			i-cache-size = <32768>;		// L1
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;	// 1G at 0x0
-	};
-
-	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
-		reg = <0xffe05000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0 0 0xef800000 0x00800000
-			  2 0 0xffdf8000 0x00008000
-			  3 0 0xffdf0000 0x00008000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x00800000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "kernel";
-				reg = <0x00000000 0x00300000>;
-			};
-			partition@300000 {
-				label = "firmware b";
-				reg = <0x00300000 0x00100000>;
-				read-only;
-			};
-			partition@400000 {
-				label = "fs";
-				reg = <0x00400000 0x00300000>;
-			};
-			partition@700000 {
-				label = "firmware a";
-				reg = <0x00700000 0x00100000>;
-				read-only;
-			};
-		};
-	};
-
-	soc8641@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xffe00000 0x00100000>;
-		bus-frequency = <0>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30  2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-		
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <28 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		rmu: rmu@d3000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,srio-rmu";
-			reg = <0xd3000 0x500>;
-			ranges = <0x0 0xd3000 0x500>;
-
-			message-unit@0 {
-				compatible = "fsl,srio-msg-unit";
-				reg = <0x0 0x100>;
-				interrupts = <
-					53 2 /* msg1_tx_irq */
-					54 2>;/* msg1_rx_irq */
-			};
-			message-unit@100 {
-				compatible = "fsl,srio-msg-unit";
-				reg = <0x100 0x100>;
-				interrupts = <
-					55 2  /* msg2_tx_irq */
-					56 2>;/* msg2_rx_irq */
-			};
-			doorbell-unit@400 {
-				compatible = "fsl,srio-dbell-unit";
-				reg = <0x400 0x80>;
-				interrupts = <
-					49 2  /* bell_outb_irq */
-					50 2>;/* bell_inb_irq */
-			};
-			port-write-unit@4e0 {
-				compatible = "fsl,srio-port-write-unit";
-				reg = <0x4e0 0x20>;
-				interrupts = <48 2>;
-			};
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@ffe08000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xffe08000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		interrupt-map-mask = <0xff00 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x11 func 0 - PCI slot 1 */
-			0x8800 0 0 1 &mpic 2 1
-			0x8800 0 0 2 &mpic 3 1
-			0x8800 0 0 3 &mpic 4 1
-			0x8800 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 1 - PCI slot 1 */
-			0x8900 0 0 1 &mpic 2 1
-			0x8900 0 0 2 &mpic 3 1
-			0x8900 0 0 3 &mpic 4 1
-			0x8900 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 2 - PCI slot 1 */
-			0x8a00 0 0 1 &mpic 2 1
-			0x8a00 0 0 2 &mpic 3 1
-			0x8a00 0 0 3 &mpic 4 1
-			0x8a00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 3 - PCI slot 1 */
-			0x8b00 0 0 1 &mpic 2 1
-			0x8b00 0 0 2 &mpic 3 1
-			0x8b00 0 0 3 &mpic 4 1
-			0x8b00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 4 - PCI slot 1 */
-			0x8c00 0 0 1 &mpic 2 1
-			0x8c00 0 0 2 &mpic 3 1
-			0x8c00 0 0 3 &mpic 4 1
-			0x8c00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 5 - PCI slot 1 */
-			0x8d00 0 0 1 &mpic 2 1
-			0x8d00 0 0 2 &mpic 3 1
-			0x8d00 0 0 3 &mpic 4 1
-			0x8d00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 6 - PCI slot 1 */
-			0x8e00 0 0 1 &mpic 2 1
-			0x8e00 0 0 2 &mpic 3 1
-			0x8e00 0 0 3 &mpic 4 1
-			0x8e00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 7 - PCI slot 1 */
-			0x8f00 0 0 1 &mpic 2 1
-			0x8f00 0 0 2 &mpic 3 1
-			0x8f00 0 0 3 &mpic 4 1
-			0x8f00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x12 func 0 - PCI slot 2 */
-			0x9000 0 0 1 &mpic 3 1
-			0x9000 0 0 2 &mpic 4 1
-			0x9000 0 0 3 &mpic 1 1
-			0x9000 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 1 - PCI slot 2 */
-			0x9100 0 0 1 &mpic 3 1
-			0x9100 0 0 2 &mpic 4 1
-			0x9100 0 0 3 &mpic 1 1
-			0x9100 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 2 - PCI slot 2 */
-			0x9200 0 0 1 &mpic 3 1
-			0x9200 0 0 2 &mpic 4 1
-			0x9200 0 0 3 &mpic 1 1
-			0x9200 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 3 - PCI slot 2 */
-			0x9300 0 0 1 &mpic 3 1
-			0x9300 0 0 2 &mpic 4 1
-			0x9300 0 0 3 &mpic 1 1
-			0x9300 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 4 - PCI slot 2 */
-			0x9400 0 0 1 &mpic 3 1
-			0x9400 0 0 2 &mpic 4 1
-			0x9400 0 0 3 &mpic 1 1
-			0x9400 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 5 - PCI slot 2 */
-			0x9500 0 0 1 &mpic 3 1
-			0x9500 0 0 2 &mpic 4 1
-			0x9500 0 0 3 &mpic 1 1
-			0x9500 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 6 - PCI slot 2 */
-			0x9600 0 0 1 &mpic 3 1
-			0x9600 0 0 2 &mpic 4 1
-			0x9600 0 0 3 &mpic 1 1
-			0x9600 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 7 - PCI slot 2 */
-			0x9700 0 0 1 &mpic 3 1
-			0x9700 0 0 2 &mpic 4 1
-			0x9700 0 0 3 &mpic 1 1
-			0x9700 0 0 4 &mpic 2 1
-
-			// IDSEL 0x1c  USB
-			0xe000 0 0 1 &i8259 12 2
-			0xe100 0 0 2 &i8259 9 2
-			0xe200 0 0 3 &i8259 10 2
-			0xe300 0 0 4 &i8259 11 2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0 0 1 &i8259 6 2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0 0 1 &i8259 7 2
-			0xf100 0 0 1 &i8259 7 2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0 0 1 &i8259 14 2
-			0xf900 0 0 1 &i8259 5 2
-			>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0x80000000
-				  0x02000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00010000>;
-			uli1575@0 {
-				reg = <0 0 0 0 0>;
-				#size-cells = <2>;
-				#address-cells = <3>;
-				ranges = <0x02000000 0x0 0x80000000
-					  0x02000000 0x0 0x80000000
-					  0x0 0x20000000
-					  0x01000000 0x0 0x00000000
-					  0x01000000 0x0 0x00000000
-					  0x0 0x00010000>;
-				isa@1e {
-					device_type = "isa";
-					#interrupt-cells = <2>;
-					#size-cells = <1>;
-					#address-cells = <2>;
-					reg = <0xf000 0 0 0 0>;
-					ranges = <1 0 0x01000000 0 0
-						  0x00001000>;
-					interrupt-parent = <&i8259>;
-
-					i8259: interrupt-controller@20 {
-						reg = <1 0x20 2
-						       1 0xa0 2
-						       1 0x4d0 2>;
-						interrupt-controller;
-						device_type = "interrupt-controller";
-						#address-cells = <0>;
-						#interrupt-cells = <2>;
-						compatible = "chrp,iic";
-						interrupts = <9 2>;
-						interrupt-parent = <&mpic>;
-					};
-
-					i8042@60 {
-						#size-cells = <0>;
-						#address-cells = <1>;
-						reg = <1 0x60 1 1 0x64 1>;
-						interrupts = <1 3 12 3>;
-						interrupt-parent =
-							<&i8259>;
-
-						keyboard@0 {
-							reg = <0>;
-							compatible = "pnpPNP,303";
-						};
-
-						mouse@1 {
-							reg = <1>;
-							compatible = "pnpPNP,f03";
-						};
-					};
-
-					rtc@70 {
-						compatible =
-							"pnpPNP,b00";
-						reg = <1 0x70 2>;
-					};
-
-					gpio@400 {
-						reg = <1 0x400 0x80>;
-					};
-				};
-			};
-		};
-
-	};
-
-	pci1: pcie@ffe09000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xffe09000 0x1000>;
-		bus-range = <0 0xff>;
-		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0000 0 0 1 &mpic 4 1
-			0x0000 0 0 2 &mpic 5 1
-			0x0000 0 0 3 &mpic 6 1
-			0x0000 0 0 4 &mpic 7 1
-			>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xa0000000
-				  0x02000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00010000>;
-		};
-	};
-/*
- * Only one of Rapid IO or PCI can be present due to HW limitations and
- * due to the fact that the 2 now share address space in the new memory
- * map.  The most likely case is that we have PCI, so comment out the
- * rapidio node.  Leave it here for reference.
-
-	rapidio@ffec0000 {
-		reg = <0xffec0000 0x11000>;
-		compatible = "fsl,srio";
-		interrupt-parent = <&mpic>;
-		interrupts = <48 2>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		fsl,srio-rmu-handle = <&rmu>;
-		ranges;
-
-		port1 {
-			#address-cells = <2>;
-			#size-cells = <2>;
-			cell-index = <1>;
-			ranges = <0 0 0x80000000 0 0x20000000>;
-		};
-	};
-*/
-
-};
diff --git a/src/powerpc/mpc8641_hpcn_36b.dts b/src/powerpc/mpc8641_hpcn_36b.dts
deleted file mode 100644
index bb575e28042a..000000000000
--- a/src/powerpc/mpc8641_hpcn_36b.dts
+++ /dev/null
@@ -1,605 +0,0 @@
-/*
- * MPC8641 HPCN Device Tree Source
- *
- * Copyright 2008-2009 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC8641HPCN";
-	compatible = "fsl,mpc8641hpcn";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// 33 MHz, from uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// 33 MHz, from uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x00000000 0x0 0x40000000>;	// 1G at 0x0
-	};
-
-	localbus@fffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
-		reg = <0x0f 0xffe05000 0x0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0 0 0xf 0xef800000 0x00800000
-			  2 0 0xf 0xffdf8000 0x00008000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x00800000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "kernel";
-				reg = <0x00000000 0x00300000>;
-			};
-			partition@300000 {
-				label = "firmware b";
-				reg = <0x00300000 0x00100000>;
-				read-only;
-			};
-			partition@400000 {
-				label = "fs";
-				reg = <0x00400000 0x00300000>;
-			};
-			partition@700000 {
-				label = "firmware a";
-				reg = <0x00700000 0x00100000>;
-				read-only;
-			};
-		};
-	};
-
-	soc8641@fffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x0f 0xffe00000 0x00100000>;
-		bus-frequency = <0>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <28 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@fffe08000 {
-		cell-index = <0>;
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0x0f 0xffe08000 0x0 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		interrupt-map-mask = <0xff00 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x11 func 0 - PCI slot 1 */
-			0x8800 0 0 1 &mpic 2 1
-			0x8800 0 0 2 &mpic 3 1
-			0x8800 0 0 3 &mpic 4 1
-			0x8800 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 1 - PCI slot 1 */
-			0x8900 0 0 1 &mpic 2 1
-			0x8900 0 0 2 &mpic 3 1
-			0x8900 0 0 3 &mpic 4 1
-			0x8900 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 2 - PCI slot 1 */
-			0x8a00 0 0 1 &mpic 2 1
-			0x8a00 0 0 2 &mpic 3 1
-			0x8a00 0 0 3 &mpic 4 1
-			0x8a00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 3 - PCI slot 1 */
-			0x8b00 0 0 1 &mpic 2 1
-			0x8b00 0 0 2 &mpic 3 1
-			0x8b00 0 0 3 &mpic 4 1
-			0x8b00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 4 - PCI slot 1 */
-			0x8c00 0 0 1 &mpic 2 1
-			0x8c00 0 0 2 &mpic 3 1
-			0x8c00 0 0 3 &mpic 4 1
-			0x8c00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 5 - PCI slot 1 */
-			0x8d00 0 0 1 &mpic 2 1
-			0x8d00 0 0 2 &mpic 3 1
-			0x8d00 0 0 3 &mpic 4 1
-			0x8d00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 6 - PCI slot 1 */
-			0x8e00 0 0 1 &mpic 2 1
-			0x8e00 0 0 2 &mpic 3 1
-			0x8e00 0 0 3 &mpic 4 1
-			0x8e00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x11 func 7 - PCI slot 1 */
-			0x8f00 0 0 1 &mpic 2 1
-			0x8f00 0 0 2 &mpic 3 1
-			0x8f00 0 0 3 &mpic 4 1
-			0x8f00 0 0 4 &mpic 1 1
-
-			/* IDSEL 0x12 func 0 - PCI slot 2 */
-			0x9000 0 0 1 &mpic 3 1
-			0x9000 0 0 2 &mpic 4 1
-			0x9000 0 0 3 &mpic 1 1
-			0x9000 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 1 - PCI slot 2 */
-			0x9100 0 0 1 &mpic 3 1
-			0x9100 0 0 2 &mpic 4 1
-			0x9100 0 0 3 &mpic 1 1
-			0x9100 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 2 - PCI slot 2 */
-			0x9200 0 0 1 &mpic 3 1
-			0x9200 0 0 2 &mpic 4 1
-			0x9200 0 0 3 &mpic 1 1
-			0x9200 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 3 - PCI slot 2 */
-			0x9300 0 0 1 &mpic 3 1
-			0x9300 0 0 2 &mpic 4 1
-			0x9300 0 0 3 &mpic 1 1
-			0x9300 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 4 - PCI slot 2 */
-			0x9400 0 0 1 &mpic 3 1
-			0x9400 0 0 2 &mpic 4 1
-			0x9400 0 0 3 &mpic 1 1
-			0x9400 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 5 - PCI slot 2 */
-			0x9500 0 0 1 &mpic 3 1
-			0x9500 0 0 2 &mpic 4 1
-			0x9500 0 0 3 &mpic 1 1
-			0x9500 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 6 - PCI slot 2 */
-			0x9600 0 0 1 &mpic 3 1
-			0x9600 0 0 2 &mpic 4 1
-			0x9600 0 0 3 &mpic 1 1
-			0x9600 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x12 func 7 - PCI slot 2 */
-			0x9700 0 0 1 &mpic 3 1
-			0x9700 0 0 2 &mpic 4 1
-			0x9700 0 0 3 &mpic 1 1
-			0x9700 0 0 4 &mpic 2 1
-
-			// IDSEL 0x1c  USB
-			0xe000 0 0 1 &i8259 12 2
-			0xe100 0 0 2 &i8259 9 2
-			0xe200 0 0 3 &i8259 10 2
-			0xe300 0 0 4 &i8259 11 2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0 0 1 &i8259 6 2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0 0 1 &i8259 7 2
-			0xf100 0 0 1 &i8259 7 2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0 0 1 &i8259 14 2
-			0xf900 0 0 1 &i8259 5 2
-			>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xe0000000
-				  0x02000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00010000>;
-			uli1575@0 {
-				reg = <0 0 0 0 0>;
-				#size-cells = <2>;
-				#address-cells = <3>;
-				ranges = <0x02000000 0x0 0xe0000000
-					  0x02000000 0x0 0xe0000000
-					  0x0 0x20000000
-					  0x01000000 0x0 0x00000000
-					  0x01000000 0x0 0x00000000
-					  0x0 0x00010000>;
-				isa@1e {
-					device_type = "isa";
-					#interrupt-cells = <2>;
-					#size-cells = <1>;
-					#address-cells = <2>;
-					reg = <0xf000 0 0 0 0>;
-					ranges = <1 0 0x01000000 0 0
-						  0x00001000>;
-					interrupt-parent = <&i8259>;
-
-					i8259: interrupt-controller@20 {
-						reg = <1 0x20 2
-						       1 0xa0 2
-						       1 0x4d0 2>;
-						interrupt-controller;
-						device_type = "interrupt-controller";
-						#address-cells = <0>;
-						#interrupt-cells = <2>;
-						compatible = "chrp,iic";
-						interrupts = <9 2>;
-						interrupt-parent = <&mpic>;
-					};
-
-					i8042@60 {
-						#size-cells = <0>;
-						#address-cells = <1>;
-						reg = <1 0x60 1 1 0x64 1>;
-						interrupts = <1 3 12 3>;
-						interrupt-parent =
-							<&i8259>;
-
-						keyboard@0 {
-							reg = <0>;
-							compatible = "pnpPNP,303";
-						};
-
-						mouse@1 {
-							reg = <1>;
-							compatible = "pnpPNP,f03";
-						};
-					};
-
-					rtc@70 {
-						compatible =
-							"pnpPNP,b00";
-						reg = <1 0x70 2>;
-					};
-
-					gpio@400 {
-						reg = <1 0x400 0x80>;
-					};
-				};
-			};
-		};
-
-	};
-
-	pci1: pcie@fffe09000 {
-		cell-index = <1>;
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0x0f 0xffe09000 0x0 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0000 0 0 1 &mpic 4 1
-			0x0000 0 0 2 &mpic 5 1
-			0x0000 0 0 3 &mpic 6 1
-			0x0000 0 0 4 &mpic 7 1
-			>;
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xe0000000
-				  0x02000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00010000>;
-		};
-	};
-};
diff --git a/src/powerpc/mpc866ads.dts b/src/powerpc/mpc866ads.dts
deleted file mode 100644
index 34c1f48b1a09..000000000000
--- a/src/powerpc/mpc866ads.dts
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * MPC866 ADS Device Tree Source
- *
- * Copyright 2006 MontaVista Software, Inc.
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC866ADS";
-	compatible = "fsl,mpc866ads";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,866@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <16>;	// 16 bytes
-			i-cache-line-size = <16>;	// 16 bytes
-			d-cache-size = <0x2000>;		// L1, 8K
-			i-cache-size = <0x4000>;		// L1, 16K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			interrupts = <15 2>;	// decrementer interrupt
-			interrupt-parent = <&PIC>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x800000>;
-	};
-
-	localbus@ff000100 {
-		compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xff000100 0x40>;
-
-		ranges = <
-			0x1 0x0 0xff080000 0x8000
-			0x5 0x0 0xff0a0000 0x8000
-		>;
-
-		board-control@1,0 {
-			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
-			compatible = "fsl,mpc866ads-bcsr";
-		};
-	};
-
-	soc@ff000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xff000000 0x100000>;
-		reg = <0xff000000 0x200>;
-		bus-frequency = <0>;
-
-		mdio@e00 {
-			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <0xe00 0x188>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			PHY: ethernet-phy@f {
-				reg = <0xf>;
-			};
-		};
-
-		ethernet@e00 {
-			device_type = "network";
-			compatible = "fsl,mpc866-fec-enet",
-			             "fsl,pq1-fec-enet";
-			reg = <0xe00 0x188>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <3 1>;
-			interrupt-parent = <&PIC>;
-			phy-handle = <&PHY>;
-			linux,network-index = <0>;
-		};
-
-		PIC: pic@0 {
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x0 0x24>;
-			compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
-		};
-
-		cpm@9c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc866-cpm", "fsl,cpm1";
-			ranges;
-			reg = <0x9c0 0x40>;
-			brg-frequency = <0>;
-			interrupts = <0 2>;	// cpm error interrupt
-			interrupt-parent = <&CPM_PIC>;
-
-			muram@2000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x2000 0x2000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x1c00>;
-				};
-			};
-
-			brg@9f0 {
-				compatible = "fsl,mpc866-brg",
-					     "fsl,cpm1-brg",
-					     "fsl,cpm-brg";
-				reg = <0x9f0 0x10>;
-				clock-frequency = <0>;
-			};
-
-			CPM_PIC: pic@930 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-				interrupts = <5 2 0 2>;
-				interrupt-parent = <&PIC>;
-				reg = <0x930 0x20>;
-				compatible = "fsl,mpc866-cpm-pic",
-				             "fsl,cpm1-pic";
-			};
-
-
-			serial@a80 {
-				device_type = "serial";
-				compatible = "fsl,mpc866-smc-uart",
-				             "fsl,cpm1-smc-uart";
-				reg = <0xa80 0x10 0x3e80 0x40>;
-				interrupts = <4>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x90>;
-			};
-
-			serial@a90 {
-				device_type = "serial";
-				compatible = "fsl,mpc866-smc-uart",
-				             "fsl,cpm1-smc-uart";
-				reg = <0xa90 0x10 0x3f80 0x40>;
-				interrupts = <3>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0xd0>;
-			};
-
-			ethernet@a00 {
-				device_type = "network";
-				compatible = "fsl,mpc866-scc-enet",
-				             "fsl,cpm1-scc-enet";
-				reg = <0xa00 0x18 0x3c00 0x100>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <30>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-command = <0000>;
-				linux,network-index = <1>;
-			};
-
-			i2c@860 {
-				compatible = "fsl,mpc866-i2c",
-					     "fsl,cpm1-i2c";
-				reg = <0x860 0x20 0x3c80 0x30>;
-				interrupts = <16>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-command = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/soc/cpm/serial@a80";
-	};
-};
diff --git a/src/powerpc/mpc885ads.dts b/src/powerpc/mpc885ads.dts
deleted file mode 100644
index 4e93bd961e0f..000000000000
--- a/src/powerpc/mpc885ads.dts
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * MPC885 ADS Device Tree Source
- *
- * Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007,2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MPC885ADS";
-	compatible = "fsl,mpc885ads";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,885@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <16>;
-			i-cache-line-size = <16>;
-			d-cache-size = <8192>;
-			i-cache-size = <8192>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			interrupts = <15 2>;	// decrementer interrupt
-			interrupt-parent = <&PIC>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	localbus@ff000100 {
-		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xff000100 0x40>;
-
-		ranges = <
-			0x0 0x0 0xfe000000 0x800000
-			0x1 0x0 0xff080000 0x8000
-			0x5 0x0 0xff0a0000 0x8000
-		>;
-
-		flash@0,0 {
-			compatible = "jedec-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <4>;
-			device-width = <1>;
-		};
-
-		board-control@1,0 {
-			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
-			compatible = "fsl,mpc885ads-bcsr";
-		};
-	};
-
-	soc@ff000000 {
-		compatible = "fsl,mpc885", "fsl,pq1-soc";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xff000000 0x4000>;
-		bus-frequency = <0>;
-
-		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <0xff000000 0x4000>;
-
-		mdio@e00 {
-			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <0xe00 0x188>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			PHY0: ethernet-phy@0 {
-				reg = <0x0>;
-			};
-
-			PHY1: ethernet-phy@1 {
-				reg = <0x1>;
-			};
-
-			PHY2: ethernet-phy@2 {
-				reg = <0x2>;
-			};
-		};
-
-		ethernet@e00 {
-			device_type = "network";
-			compatible = "fsl,mpc885-fec-enet",
-			             "fsl,pq1-fec-enet";
-			reg = <0xe00 0x188>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <3 1>;
-			interrupt-parent = <&PIC>;
-			phy-handle = <&PHY0>;
-			linux,network-index = <0>;
-		};
-
-		ethernet@1e00 {
-			device_type = "network";
-			compatible = "fsl,mpc885-fec-enet",
-			             "fsl,pq1-fec-enet";
-			reg = <0x1e00 0x188>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <7 1>;
-			interrupt-parent = <&PIC>;
-			phy-handle = <&PHY1>;
-			linux,network-index = <1>;
-		};
-
-		PIC: interrupt-controller@0 {
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x0 0x24>;
-			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
-		};
-
-		pcmcia@80 {
-			#address-cells = <3>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			compatible = "fsl,pq-pcmcia";
-			device_type = "pcmcia";
-			reg = <0x80 0x80>;
-			interrupt-parent = <&PIC>;
-			interrupts = <13 1>;
-		};
-
-		cpm@9c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
-			command-proc = <0x9c0>;
-			interrupts = <0>;	// cpm error interrupt
-			interrupt-parent = <&CPM_PIC>;
-			reg = <0x9c0 0x40>;
-			ranges;
-
-			muram@2000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x2000 0x2000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x1c00>;
-				};
-			};
-
-			brg@9f0 {
-				compatible = "fsl,mpc885-brg",
-				             "fsl,cpm1-brg",
-				             "fsl,cpm-brg";
-				clock-frequency = <0>;
-				reg = <0x9f0 0x10>;
-			};
-
-			CPM_PIC: interrupt-controller@930 {
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				interrupts = <5 2 0 2>;
-				interrupt-parent = <&PIC>;
-				reg = <0x930 0x20>;
-				compatible = "fsl,mpc885-cpm-pic",
-				             "fsl,cpm1-pic";
-			};
-
-			serial@a80 {
-				device_type = "serial";
-				compatible = "fsl,mpc885-smc-uart",
-				             "fsl,cpm1-smc-uart";
-				reg = <0xa80 0x10 0x3e80 0x40>;
-				interrupts = <4>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x90>;
-			};
-
-			serial@a90 {
-				device_type = "serial";
-				compatible = "fsl,mpc885-smc-uart",
-				             "fsl,cpm1-smc-uart";
-				reg = <0xa90 0x10 0x3f80 0x40>;
-				interrupts = <3>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0xd0>;
-			};
-
-			ethernet@a40 {
-				device_type = "network";
-				compatible = "fsl,mpc885-scc-enet",
-				             "fsl,cpm1-scc-enet";
-				reg = <0xa40 0x18 0x3e00 0x100>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <28>;
-				interrupt-parent = <&CPM_PIC>;
-				phy-handle = <&PHY2>;
-				fsl,cpm-command = <0x80>;
-				linux,network-index = <2>;
-			};
-
-			i2c@860 {
-				compatible = "fsl,mpc885-i2c",
-					     "fsl,cpm1-i2c";
-				reg = <0x860 0x20 0x3c80 0x30>;
-				interrupts = <16>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-command = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/soc/cpm/serial@a80";
-	};
-};
diff --git a/src/powerpc/mucmc52.dts b/src/powerpc/mucmc52.dts
deleted file mode 100644
index d3a792bb5c1a..000000000000
--- a/src/powerpc/mucmc52.dts
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Manroland mucmc52 board Device Tree Source
- *
- * Copyright (C) 2009 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- * Copyright 2006-2007 Secret Lab Technologies Ltd.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-/* Timer pins that need to be in GPIO mode */
-&gpt0 { gpio-controller; };
-&gpt1 { gpio-controller; };
-&gpt2 { gpio-controller; };
-&gpt3 { gpio-controller; };
-
-/* Disabled timers */
-&gpt4 { status = "disabled"; };
-&gpt5 { status = "disabled"; };
-&gpt6 { status = "disabled"; };
-&gpt7 { status = "disabled"; };
-
-/ {
-	model = "manroland,mucmc52";
-	compatible = "manroland,mucmc52";
-
-	soc5200@f0000000 {
-		rtc@800 {
-			status = "disabled";
-		};
-
-		can@900 {
-			status = "disabled";
-		};
-
-		can@980 {
-			status = "disabled";
-		};
-
-		spi@f00 {
-			status = "disabled";
-		};
-
-		usb@1000 {
-			status = "disabled";
-		};
-
-		psc@2000 {		// PSC1
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2200 {		// PSC2
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2400 {		// PSC3
-			status = "disabled";
-		};
-
-		psc@2600 {		// PSC4
-			status = "disabled";
-		};
-
-		psc@2800 {		// PSC5
-			status = "disabled";
-		};
-
-		psc@2c00 {		// PSC6
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@0 {
-				compatible = "intel,lxt971";
-				reg = <0>;
-			};
-		};
-
-		i2c@3d00 {
-			status = "disabled";
-		};
-
-		i2c@3d40 {
-			hwmon@2c {
-				compatible = "ad,adm9240";
-				reg = <0x2c>;
-			};
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-	};
-
-	pci@f0000d00 {
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-				/* IDSEL 0x10 */
-				0x8000 0 0 1 &mpc5200_pic 0 3 3
-				0x8000 0 0 2 &mpc5200_pic 0 3 3
-				0x8000 0 0 3 &mpc5200_pic 0 2 3
-				0x8000 0 0 4 &mpc5200_pic 0 1 3
-				>;
-		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
-	};
-
-	localbus {
-		ranges = <0 0 0xff800000 0x00800000
-			  1 0 0x80000000 0x00800000
-			  3 0 0x80000000 0x00800000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x00800000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-			partition@0 {
-				label = "DTS";
-				reg = <0x0 0x00100000>;
-			};
-			partition@100000 {
-				label = "Kernel";
-				reg = <0x100000 0x00200000>;
-			};
-			partition@300000 {
-				label = "RootFS";
-				reg = <0x00300000 0x00200000>;
-			};
-			partition@500000 {
-				label = "user";
-				reg = <0x00500000 0x00200000>;
-			};
-			partition@700000 {
-				label = "U-Boot";
-				reg = <0x00700000 0x00040000>;
-			};
-			partition@740000 {
-				label = "Env";
-				reg = <0x00740000 0x00020000>;
-			};
-			partition@760000 {
-				label = "red. Env";
-				reg = <0x00760000 0x00020000>;
-			};
-			partition@780000 {
-				label = "reserve";
-				reg = <0x00780000 0x00080000>;
-			};
-		};
-
-		simple100: gpio-controller-100@3,600100 {
-			compatible = "manroland,mucmc52-aux-gpio";
-			reg = <3 0x00600100 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		simple104: gpio-controller-104@3,600104 {
-			compatible = "manroland,mucmc52-aux-gpio";
-			reg = <3 0x00600104 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		simple200: gpio-controller-200@3,600200 {
-			compatible = "manroland,mucmc52-aux-gpio";
-			reg = <3 0x00600200 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		simple201: gpio-controller-201@3,600201 {
-			compatible = "manroland,mucmc52-aux-gpio";
-			reg = <3 0x00600201 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		simple202: gpio-controller-202@3,600202 {
-			compatible = "manroland,mucmc52-aux-gpio";
-			reg = <3 0x00600202 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		simple203: gpio-controller-203@3,600203 {
-			compatible = "manroland,mucmc52-aux-gpio";
-			reg = <3 0x00600203 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		simple204: gpio-controller-204@3,600204 {
-			compatible = "manroland,mucmc52-aux-gpio";
-			reg = <3 0x00600204 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		simple206: gpio-controller-206@3,600206 {
-			compatible = "manroland,mucmc52-aux-gpio";
-			reg = <3 0x00600206 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		simple207: gpio-controller-207@3,600207 {
-			compatible = "manroland,mucmc52-aux-gpio";
-			reg = <3 0x00600207 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		simple20f: gpio-controller-20f@3,60020f {
-			compatible = "manroland,mucmc52-aux-gpio";
-			reg = <3 0x0060020f 0x1>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-	};
-};
diff --git a/src/powerpc/mvme5100.dts b/src/powerpc/mvme5100.dts
deleted file mode 100644
index 1ecb341a232a..000000000000
--- a/src/powerpc/mvme5100.dts
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Device Tree Source for Motorola/Emerson MVME5100.
- *
- * Copyright 2013 CSC Australia Pty. Ltd.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	model = "MVME5100";
-	compatible = "MVME5100";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &serial0;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,7410 {
-			device_type = "cpu";
-			reg = <0x0>;
-			/* Following required by dtc but not used */
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			timebase-frequency = <25000000>;
-			clock-frequency = <500000000>;
-			bus-frequency = <100000000>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x20000000>;
-	};
-
-	hawk@fef80000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "hawk-bridge", "simple-bus";
-		ranges = <0x0 0xfef80000 0x10000>;
-		reg = <0xfef80000 0x10000>;
-
-		serial0: serial@8000 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x8000 0x80>;
-			reg-shift = <4>;
-			clock-frequency = <1843200>;
-			current-speed = <9600>;
-			interrupts = <1 1>; // IRQ1 Level Active Low.
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@8200 {
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x8200 0x80>;
-			reg-shift = <4>;
-			clock-frequency = <1843200>;
-			current-speed = <9600>;
-			interrupts = <1 1>; // IRQ1 Level Active Low.
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: interrupt-controller@f3f80000 {
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			device_type = "open-pic";
-			compatible = "chrp,open-pic";
-			interrupt-controller;
-			reg = <0xf3f80000 0x40000>;
-		};
-	};
-
-	pci0: pci@feff0000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "hawk-pci";
-		reg = <0xfec00000 0x400000>;
-		8259-interrupt-acknowledge = <0xfeff0030>;
-		ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0x800000
-			  0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>;
-		bus-range = <0 255>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/*
-			 * This definition (IDSEL 11) duplicates the
-			 * interrupts definition in the i8259
-			 * interrupt controller below.
-			 *
-			 * Do not change the interrupt sense/polarity from
-			 * 0x2 to anything else, doing so will cause endless
-			 * "spurious" i8259 interrupts to be fielded.
-			 */
-			// IDSEL 11 - iPMC712 PCI/ISA Bridge
-			0x5800 0x0 0x0 0x1 &mpic 0x0 0x2
-			0x5800 0x0 0x0 0x2 &mpic 0x0 0x2
-			0x5800 0x0 0x0 0x3 &mpic 0x0 0x2
-			0x5800 0x0 0x0 0x4 &mpic 0x0 0x2
-
-			/* IDSEL 12 - Not Used */
-
-			/* IDSEL 13 - Universe VME Bridge */
-			0x6800 0x0 0x0 0x1 &mpic 0x5 0x1
-			0x6800 0x0 0x0 0x2 &mpic 0x6 0x1
-			0x6800 0x0 0x0 0x3 &mpic 0x7 0x1
-			0x6800 0x0 0x0 0x4 &mpic 0x8 0x1
-
-			/* IDSEL 14 - ENET 1 */
-			0x7000 0x0 0x0 0x1 &mpic 0x2 0x1
-
-			/* IDSEL 15 - Not Used */
-
-			/* IDSEL 16 - PMC Slot 1 */
-			0x8000 0x0 0x0 0x1 &mpic 0x9 0x1
-			0x8000 0x0 0x0 0x2 &mpic 0xa 0x1
-			0x8000 0x0 0x0 0x3 &mpic 0xb 0x1
-			0x8000 0x0 0x0 0x4 &mpic 0xc 0x1
-
-			/* IDSEL 17 - PMC Slot 2 */
-			0x8800 0x0 0x0 0x1 &mpic 0xc 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x9 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0xa 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0xb 0x1
-
-			/* IDSEL 18 - Not Used */
-
-			/* IDSEL 19 - ENET 2 */
-			0x9800 0x0 0x0 0x1 &mpic 0xd 0x1
-
-			/* IDSEL 20 - PMCSPAN (PCI-X) */
-			0xa000 0x0 0x0 0x1 &mpic 0x9 0x1
-			0xa000 0x0 0x0 0x2 &mpic 0xa 0x1
-			0xa000 0x0 0x0 0x3 &mpic 0xb 0x1
-			0xa000 0x0 0x0 0x4 &mpic 0xc 0x1
-
-		>;
-
-		isa {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			#interrupt-cells = <2>;
-			device_type = "isa";
-			compatible = "isa";
-			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
-			interrupt-parent = <&i8259>;
-
-			i8259: interrupt-controller@20 {
-				#interrupt-cells = <2>;
-				#address-cells = <0>;
-				interrupts = <0 2>;
-				device_type = "interrupt-controller";
-				compatible = "chrp,iic";
-				interrupt-controller;
-				reg = <1 0x00000020 0x00000002
-                                       1 0x000000a0 0x00000002
-                                       1 0x000004d0 0x00000002>;
-				interrupt-parent = <&mpic>;
-			};
-
-		};
-
-	};
-
-	chosen {
-		linux,stdout-path = &serial0;
-        };
-
-};
diff --git a/src/powerpc/o2d.dts b/src/powerpc/o2d.dts
deleted file mode 100644
index 9f6dd4d889b3..000000000000
--- a/src/powerpc/o2d.dts
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * O2D Device Tree Source
- *
- * Copyright (C) 2012 DENX Software Engineering
- * Anatolij Gustschin <agust@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "o2d.dtsi"
-
-/ {
-	model = "ifm,o2d";
-	compatible = "ifm,o2d";
-
-	memory {
-		reg = <0x00000000 0x08000000>;  // 128MB
-	};
-
-	localbus {
-		ranges = <0 0 0xfc000000 0x02000000
-			  3 0 0xe3000000 0x00100000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			partition@60000 {
-				label = "kernel";
-				reg = <0x00060000 0x00260000>;
-				read-only;
-			};
-			/* o2d specific partitions */
-			partition@2c0000 {
-				label = "o2d user defined";
-				reg = <0x002c0000 0x01d40000>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/o2d.dtsi b/src/powerpc/o2d.dtsi
deleted file mode 100644
index cf073e693f24..000000000000
--- a/src/powerpc/o2d.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * O2D base Device Tree Source
- *
- * Copyright (C) 2012 DENX Software Engineering
- * Anatolij Gustschin <agust@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 {
-	gpio-controller;
-	fsl,has-wdt;
-	fsl,wdt-on-boot = <0>;
-};
-&gpt1 { gpio-controller; };
-
-/ {
-	model = "ifm,o2d";
-	compatible = "ifm,o2d";
-
-	memory {
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
-
-	soc5200@f0000000 {
-
-		rtc@800 {
-			status = "disabled";
-		};
-
-		psc@2000 {		// PSC1
-			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-
-			spidev@0 {
-				compatible = "spidev";
-				spi-max-frequency = <250000>;
-				reg = <0>;
-			};
-		};
-
-		psc@2200 {		// PSC2
-			status = "disabled";
-		};
-
-		psc@2400 {		// PSC3
-			status = "disabled";
-		};
-
-		psc@2600 {		// PSC4
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2800 {		// PSC5
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2c00 {		// PSC6
-			status = "disabled";
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-	};
-
-	localbus {
-		ranges = <0 0 0xff000000 0x01000000
-			  3 0 0xe3000000 0x00100000>;
-
-		// flash device at LocalPlus Bus CS0
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x01000000>;
-			bank-width = <1>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-			no-unaligned-direct-access;
-
-			/* common layout for all machines */
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-			partition@40000 {
-				label = "env";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-		};
-
-		csi@3,0 {
-			compatible = "ifm,o2d-csi";
-			reg = <3 0 0x00100000>;
-			ifm,csi-clk-handle = <&gpt7>;
-			gpios = <&gpio_simple 23 0	/* imag_capture */
-				 &gpio_simple 26 0	/* imag_reset */
-				 &gpio_simple 29 0>;	/* imag_master_en */
-
-			interrupts = <1 1 2>;		/* IRQ1, edge falling */
-
-			ifm,csi-addr-bus-width = <24>;
-			ifm,csi-data-bus-width = <8>;
-			ifm,csi-wait-cycles = <0>;
-		};
-	};
-};
diff --git a/src/powerpc/o2d300.dts b/src/powerpc/o2d300.dts
deleted file mode 100644
index 29affe0f0da3..000000000000
--- a/src/powerpc/o2d300.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * O2D300 Device Tree Source
- *
- * Copyright (C) 2012 DENX Software Engineering
- * Anatolij Gustschin <agust@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "o2d.dtsi"
-
-/ {
-	model = "ifm,o2d300";
-	compatible = "ifm,o2d";
-
-	localbus {
-		ranges = <0 0 0xfc000000 0x02000000
-			  3 0 0xe3000000 0x00100000>;
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			partition@40000 {
-				label = "env_1";
-				reg = <0x00040000 0x00020000>;
-				read-only;
-			};
-			partition@60000 {
-				label = "env_2";
-				reg = <0x00060000 0x00020000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "kernel";
-				reg = <0x00080000 0x00260000>;
-				read-only;
-			};
-			/* o2d300 specific partitions */
-			partition@2e0000 {
-				label = "o2d300 user defined";
-				reg = <0x002e0000 0x01d20000>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/o2dnt2.dts b/src/powerpc/o2dnt2.dts
deleted file mode 100644
index a0f5b97a4f06..000000000000
--- a/src/powerpc/o2dnt2.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * O2DNT2 Device Tree Source
- *
- * Copyright (C) 2012 DENX Software Engineering
- * Anatolij Gustschin <agust@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "o2d.dtsi"
-
-/ {
-	model = "ifm,o2dnt2";
-	compatible = "ifm,o2d";
-
-	memory {
-		reg = <0x00000000 0x08000000>;  // 128MB
-	};
-
-	localbus {
-		ranges = <0 0 0xfc000000 0x02000000
-			  3 0 0xe3000000 0x00100000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			partition@60000 {
-				label = "kernel";
-				reg = <0x00060000 0x00260000>;
-				read-only;
-			};
-
-			/* o2dnt2 specific partitions */
-			partition@2c0000 {
-				label = "o2dnt2 user defined";
-				reg = <0x002c0000 0x01d40000>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/o2i.dts b/src/powerpc/o2i.dts
deleted file mode 100644
index e3cc99d1360b..000000000000
--- a/src/powerpc/o2i.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * O2I Device Tree Source
- *
- * Copyright (C) 2012 DENX Software Engineering
- * Anatolij Gustschin <agust@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "o2d.dtsi"
-
-/ {
-	model = "ifm,o2i";
-	compatible = "ifm,o2d";
-
-	localbus {
-		flash@0,0 {
-			partition@60000 {
-				label = "kernel";
-				reg = <0x00060000 0x00260000>;
-				read-only;
-			};
-			/* o2i specific partitions */
-			partition@2c0000 {
-				label = "o2i user defined";
-				reg = <0x002c0000 0x00d40000>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/o2mnt.dts b/src/powerpc/o2mnt.dts
deleted file mode 100644
index d91859a9e940..000000000000
--- a/src/powerpc/o2mnt.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * O2MNT Device Tree Source
- *
- * Copyright (C) 2012 DENX Software Engineering
- * Anatolij Gustschin <agust@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "o2d.dtsi"
-
-/ {
-	model = "ifm,o2mnt";
-	compatible = "ifm,o2d";
-
-	localbus {
-		flash@0,0 {
-			partition@60000 {
-				label = "kernel";
-				reg = <0x00060000 0x00260000>;
-				read-only;
-			};
-			/* add o2mnt specific partitions */
-			partition@2c0000 {
-				label = "o2mnt user defined";
-				reg = <0x002c0000 0x00d40000>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/o3dnt.dts b/src/powerpc/o3dnt.dts
deleted file mode 100644
index acce49326491..000000000000
--- a/src/powerpc/o3dnt.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * O3DNT Device Tree Source
- *
- * Copyright (C) 2012 DENX Software Engineering
- * Anatolij Gustschin <agust@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "o2d.dtsi"
-
-/ {
-	model = "ifm,o3dnt";
-	compatible = "ifm,o2d";
-
-	memory {
-		reg = <0x00000000 0x04000000>;  // 64MB
-	};
-
-	localbus {
-		ranges = <0 0 0xfc000000 0x01000000
-			  3 0 0xe3000000 0x00100000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x01000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			partition@60000 {
-				label = "kernel";
-				reg = <0x00060000 0x00260000>;
-				read-only;
-			};
-
-			/* o3dnt specific partitions */
-			partition@2c0000 {
-				label = "o3dnt user defined";
-				reg = <0x002c0000 0x00d40000>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/obs600.dts b/src/powerpc/obs600.dts
deleted file mode 100644
index 18e7d79ee4c3..000000000000
--- a/src/powerpc/obs600.dts
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * Device Tree Source for PlatHome OpenBlockS 600 (405EX)
- *
- * Copyright 2011 Ben Herrenschmidt, IBM Corp.
- *
- * Based on Kilauea by:
- *
- * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "PlatHome,OpenBlockS 600";
-	compatible = "plathome,obs600";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405EX";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>; /* 16 kB */
-			d-cache-size = <16384>; /* 16 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic-405ex", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-405ex","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	CPM0: cpm {
-		compatible = "ibm,cpm";
-		dcr-access-method = "native";
-		dcr-reg = <0x0b0 0x003>;
-		unused-units = <0x00000000>;
-		idle-doze = <0x02000000>;
-		standby = <0xe3e74800>;
-	};
-
-	plb {
-		compatible = "ibm,plb-405ex", "ibm,plb4";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2";
-			dcr-reg = <0x010 0x002>;
-			interrupt-parent = <&UIC2>;
-			interrupts = <0x5 0x4	/* ECC DED Error */
-				      0x6 0x4>;	/* ECC SEC Error */
-		};
-
-		CRYPTO: crypto@ef700000 {
-			compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
-			reg = <0xef700000 0x80400>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <0x17 0x2>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405ex", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x80000000 0x80000000 0x10000000
-				  0xef600000 0xef600000 0x00a00000
-				  0xf0000000 0xf0000000 0x10000000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x08000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel + initrd";
-						reg = <0x00000000 0x03de0000>;
-					};
-					partition@3de0000 {
-						label = "user config area";
-						reg = <0x03de0000 0x00080000>;
-					};
-					partition@3e60000 {
-						label = "user program area";
-						reg = <0x03e60000 0x04000000>;
-					};
-					partition@7e60000 {
-						label = "flat device tree";
-						reg = <0x07e60000 0x00080000>;
-					};
-					partition@7ee0000 {
-						label = "test program";
-						reg = <0x07ee0000 0x00080000>;
-					};
-					partition@7f60000 {
-						label = "u-boot env";
-						reg = <0x07f60000 0x00040000>;
-					};
-					partition@7fa0000 {
-						label = "u-boot";
-						reg = <0x07fa0000 0x00060000>;
-					};
-				};
-			};
-
-			UART0: serial@ef600200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600200 0x00000008>;
-				virtual-reg = <0xef600200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1a 0x4>;
-			};
-
-			UART1: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@ef600400 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				rtc@68 {
-					compatible = "dallas,ds1340";
-					reg = <0x68>;
-				};
-			};
-
-			IIC1: i2c@ef600500 {
-				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <0xef600500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-			RGMII0: emac-rgmii@ef600b00 {
-				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <0xef600b00 0x00000104>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0x0>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
-						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
-				reg = <0xef600900 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <0x1>;
-				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4sync";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
-						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
-				reg = <0xef600a00 0x000000c4>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				tx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			GPIO: gpio@ef600800 {
-				device_type = "gpio";
-				compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio";
-				reg = <0xef600800 0x50>;
-			};
-		};
-	};
-        chosen {
-                linux,stdout-path = "/plb/opb/serial@ef600200";
-        };
-};
diff --git a/src/powerpc/oca4080.dts b/src/powerpc/oca4080.dts
deleted file mode 100644
index 3d4c751d1608..000000000000
--- a/src/powerpc/oca4080.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * OCA4080 Device Tree Source
- *
- * Copyright 2014 Prodrive Technologies B.V.
- *
- * Based on:
- * P4080DS Device Tree Source
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p4080si-pre.dtsi"
-
-/ {
-	model = "fsl,OCA4080";
-	compatible = "fsl,OCA4080";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-		i2c@118000 {
-			status = "disabled";
-		};
-
-		i2c@118100 {
-			status = "disabled";
-		};
-
-		i2c@119000 {
-			status = "disabled";
-		};
-
-		i2c@119100 {
-			status = "disabled";
-		};
-
-		usb0: usb@210000 {
-			status = "disabled";
-		};
-
-		usb1: usb@211000 {
-			status = "disabled";
-		};
-	};
-
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-	};
-
-	lbc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xef800000 0x800000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x00800000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-	};
-
-	pci0: pcie@ffe200000 {
-		status = "disabled";
-	};
-
-	pci1: pcie@ffe201000 {
-		status = "disabled";
-	};
-
-	pci2: pcie@ffe202000 {
-		status = "disabled";
-	};
-};
-
-/include/ "fsl/p4080si-post.dtsi"
diff --git a/src/powerpc/p1010rdb-pa.dts b/src/powerpc/p1010rdb-pa.dts
deleted file mode 100644
index 767d4c032857..000000000000
--- a/src/powerpc/p1010rdb-pa.dts
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * P1010 RDB Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p1010si-pre.dtsi"
-
-/ {
-	model = "fsl,P1010RDB";
-	compatible = "fsl,P1010RDB";
-
-	/include/ "p1010rdb_32b.dtsi"
-};
-
-/include/ "p1010rdb.dtsi"
-/include/ "p1010rdb-pa.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
diff --git a/src/powerpc/p1010rdb-pa.dtsi b/src/powerpc/p1010rdb-pa.dtsi
deleted file mode 100644
index 434fb2d58575..000000000000
--- a/src/powerpc/p1010rdb-pa.dtsi
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&ifc_nand {
-	partition@0 {
-		/* This location must not be altered  */
-		/* 1MB for u-boot Bootloader Image */
-		reg = <0x0 0x00100000>;
-		label = "NAND U-Boot Image";
-		read-only;
-	};
-
-	partition@100000 {
-		/* 1MB for DTB Image */
-		reg = <0x00100000 0x00100000>;
-		label = "NAND DTB Image";
-	};
-
-	partition@200000 {
-		/* 4MB for Linux Kernel Image */
-		reg = <0x00200000 0x00400000>;
-		label = "NAND Linux Kernel Image";
-	};
-
-	partition@600000 {
-		/* 4MB for Compressed Root file System Image */
-		reg = <0x00600000 0x00400000>;
-		label = "NAND Compressed RFS Image";
-	};
-
-	partition@a00000 {
-		/* 15MB for JFFS2 based Root file System */
-		reg = <0x00a00000 0x00f00000>;
-		label = "NAND JFFS2 Root File System";
-	};
-
-	partition@1900000 {
-		/* 7MB for User Area */
-		reg = <0x01900000 0x00700000>;
-		label = "NAND User area";
-	};
-};
-
-&phy0 {
-	interrupts = <1 1 0 0>;
-};
-
-&phy1 {
-	interrupts = <2 1 0 0>;
-};
-
-&phy2 {
-	interrupts = <4 1 0 0>;
-};
diff --git a/src/powerpc/p1010rdb-pa_36b.dts b/src/powerpc/p1010rdb-pa_36b.dts
deleted file mode 100644
index 3033371bc007..000000000000
--- a/src/powerpc/p1010rdb-pa_36b.dts
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * P1010 RDB Device Tree Source (36-bit address map)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1010si-pre.dtsi"
-
-/ {
-	model = "fsl,P1010RDB";
-	compatible = "fsl,P1010RDB";
-
-	/include/ "p1010rdb_36b.dtsi"
-};
-
-/include/ "p1010rdb.dtsi"
-/include/ "p1010rdb-pa.dtsi"
-/include/ "fsl/p1010si-post.dtsi"
diff --git a/src/powerpc/p1010rdb-pb.dts b/src/powerpc/p1010rdb-pb.dts
deleted file mode 100644
index 6eeb7d3185be..000000000000
--- a/src/powerpc/p1010rdb-pb.dts
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * P1010 RDB Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p1010si-pre.dtsi"
-
-/ {
-	model = "fsl,P1010RDB-PB";
-	compatible = "fsl,P1010RDB-PB";
-
-	/include/ "p1010rdb_32b.dtsi"
-};
-
-/include/ "p1010rdb.dtsi"
-
-&phy0 {
-	interrupts = <0 1 0 0>;
-};
-
-&phy1 {
-	interrupts = <2 1 0 0>;
-};
-
-&phy2 {
-	interrupts = <1 1 0 0>;
-};
-
-/include/ "fsl/p1010si-post.dtsi"
diff --git a/src/powerpc/p1010rdb-pb_36b.dts b/src/powerpc/p1010rdb-pb_36b.dts
deleted file mode 100644
index 7ab3c907b326..000000000000
--- a/src/powerpc/p1010rdb-pb_36b.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * P1010 RDB Device Tree Source (36-bit address map)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1010si-pre.dtsi"
-
-/ {
-	model = "fsl,P1010RDB-PB";
-	compatible = "fsl,P1010RDB-PB";
-
-	/include/ "p1010rdb_36b.dtsi"
-};
-
-/include/ "p1010rdb.dtsi"
-
-&phy0 {
-	interrupts = <0 1 0 0>;
-};
-
-&phy1 {
-	interrupts = <2 1 0 0>;
-};
-
-&phy2 {
-	interrupts = <1 1 0 0>;
-};
-
-/include/ "fsl/p1010si-post.dtsi"
diff --git a/src/powerpc/p1010rdb.dtsi b/src/powerpc/p1010rdb.dtsi
deleted file mode 100644
index ea534efa790d..000000000000
--- a/src/powerpc/p1010rdb.dtsi
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_ifc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x2000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@40000 {
-			/* 256KB for DTB Image */
-			reg = <0x00040000 0x00040000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@80000 {
-			/* 7 MB for Linux Kernel Image */
-			reg = <0x00080000 0x00700000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@800000 {
-			/* 20MB for JFFS2 based Root file System */
-			reg = <0x00800000 0x01400000>;
-			label = "NOR JFFS2 Root File System";
-		};
-
-		partition@1f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x01f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-
-	ifc_nand: nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,ifc-nand";
-		reg = <0x1 0x0 0x10000>;
-	};
-
-	cpld@3,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p1010rdb-cpld";
-		reg = <0x3 0x0 0x0000020>;
-		bank-width = <1>;
-		device-width = <1>;
-	};
-};
-
-&board_soc {
-	i2c@3000 {
-		eeprom@50 {
-			compatible = "st,24c256";
-			reg = <0x50>;
-		};
-
-		rtc@68 {
-			compatible = "pericom,pt7c4338";
-			reg = <0x68>;
-		};
-	};
-
-	i2c@3100 {
-		eeprom@52 {
-			compatible = "atmel,24c01";
-			reg = <0x52>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <40000000>;
-
-			partition@0 {
-				/* 1MB for u-boot Bootloader Image */
-				/* 1MB for Environment */
-				reg = <0x0 0x00100000>;
-				label = "SPI Flash U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 512KB for DTB Image */
-				reg = <0x00100000 0x00080000>;
-				label = "SPI Flash DTB Image";
-			};
-
-			partition@180000 {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00180000 0x00400000>;
-				label = "SPI Flash Linux Kernel Image";
-			};
-
-			partition@580000 {
-				/* 4MB for Compressed RFS Image */
-				reg = <0x00580000 0x00400000>;
-				label = "SPI Flash Compressed RFSImage";
-			};
-
-			partition@980000 {
-				/* 6.5MB for JFFS2 based RFS */
-				reg = <0x00980000 0x00680000>;
-				label = "SPI Flash JFFS2 RFS";
-			};
-		};
-	};
-
-	usb@22000 {
-		phy_type = "utmi";
-		dr_mode = "host";
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			reg = <0x1>;
-		};
-
-		phy1: ethernet-phy@1 {
-			reg = <0x0>;
-		};
-
-		phy2: ethernet-phy@2 {
-			reg = <0x2>;
-		};
-
-		tbi-phy@3 {
-			device_type = "tbi-phy";
-			reg = <0x3>;
-		};
-	};
-
-	mdio@25000 {
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26000 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		phy-handle = <&phy0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy1>;
-		tbi-handle = <&tbi0>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy2>;
-		tbi-handle = <&tbi1>;
-		phy-connection-type = "sgmii";
-	};
-};
diff --git a/src/powerpc/p1010rdb_32b.dtsi b/src/powerpc/p1010rdb_32b.dtsi
deleted file mode 100644
index fdc19aab2f70..000000000000
--- a/src/powerpc/p1010rdb_32b.dtsi
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-memory {
-	device_type = "memory";
-};
-
-board_ifc: ifc: ifc@ffe1e000 {
-	/* NOR, NAND Flashes and CPLD on board */
-	ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-		  0x1 0x0 0x0 0xff800000 0x00010000
-		  0x3 0x0 0x0 0xffb00000 0x00000020>;
-	reg = <0x0 0xffe1e000 0 0x2000>;
-};
-
-board_soc: soc: soc@ffe00000 {
-	ranges = <0x0 0x0 0xffe00000 0x100000>;
-};
-
-pci0: pcie@ffe09000 {
-	reg = <0 0xffe09000 0 0x1000>;
-	ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-		  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-	pcie@0 {
-		ranges = <0x2000000 0x0 0xa0000000
-			  0x2000000 0x0 0xa0000000
-			  0x0 0x20000000
-
-			  0x1000000 0x0 0x0
-			  0x1000000 0x0 0x0
-			  0x0 0x100000>;
-	};
-};
-
-pci1: pcie@ffe0a000 {
-	reg = <0 0xffe0a000 0 0x1000>;
-	ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-		  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-	pcie@0 {
-		ranges = <0x2000000 0x0 0x80000000
-			  0x2000000 0x0 0x80000000
-			  0x0 0x20000000
-
-			  0x1000000 0x0 0x0
-			  0x1000000 0x0 0x0
-			  0x0 0x100000>;
-	};
-};
diff --git a/src/powerpc/p1010rdb_36b.dtsi b/src/powerpc/p1010rdb_36b.dtsi
deleted file mode 100644
index de2fceed4f79..000000000000
--- a/src/powerpc/p1010rdb_36b.dtsi
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-memory {
-	device_type = "memory";
-};
-
-board_ifc: ifc: ifc@fffe1e000 {
-	/* NOR, NAND Flashes and CPLD on board */
-	ranges = <0x0 0x0 0xf 0xee000000 0x02000000
-		  0x1 0x0 0xf 0xff800000 0x00010000
-		  0x3 0x0 0xf 0xffb00000 0x00000020>;
-	reg = <0xf 0xffe1e000 0 0x2000>;
-};
-
-board_soc: soc: soc@fffe00000 {
-	ranges = <0x0 0xf 0xffe00000 0x100000>;
-};
-
-pci0: pcie@fffe09000 {
-	reg = <0xf 0xffe09000 0 0x1000>;
-	ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
-		  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-	pcie@0 {
-		ranges = <0x2000000 0x0 0xc0000000
-			  0x2000000 0x0 0xc0000000
-			  0x0 0x20000000
-
-			  0x1000000 0x0 0x0
-			  0x1000000 0x0 0x0
-			  0x0 0x100000>;
-	};
-};
-
-pci1: pcie@fffe0a000 {
-	reg = <0xf 0xffe0a000 0 0x1000>;
-	ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
-		  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-	pcie@0 {
-		ranges = <0x2000000 0x0 0xc0000000
-			  0x2000000 0x0 0xc0000000
-			  0x0 0x20000000
-
-			  0x1000000 0x0 0x0
-			  0x1000000 0x0 0x0
-			  0x0 0x100000>;
-	};
-};
diff --git a/src/powerpc/p1020mbg-pc.dtsi b/src/powerpc/p1020mbg-pc.dtsi
deleted file mode 100644
index a24699cfea9c..000000000000
--- a/src/powerpc/p1020mbg-pc.dtsi
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x4000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* 128KB for DTB Image */
-			reg = <0x0 0x00020000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@20000 {
-			/* 3.875 MB for Linux Kernel Image */
-			reg = <0x00020000 0x003e0000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@400000 {
-			/* 58MB for Root file System */
-			reg = <0x00400000 0x03a00000>;
-			label = "NOR Root File System";
-		};
-
-		partition@3e00000 {
-			/* This location must not be altered  */
-			/* 1M for Vitesse 7385 Switch firmware */
-			reg = <0x3e00000 0x00100000>;
-			label = "NOR Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@3f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x03f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-
-	L2switch@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "vitesse-7385";
-		reg = <0x2 0x0 0x20000>;
-	};
-};
-
-&soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "dallas,ds1339";
-			reg = <0x68>;
-		};
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <2 1 0 0>;
-			reg = <0x1>;
-		};
-	};
-
-	mdio@25000 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26000 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		fixed-link = <1 1 1000 0 0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi1>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	/* USB2 is shared with localbus, so it must be disabled
-	   by default. We can't put 'status = "disabled";' here
-	   since U-Boot doesn't clear the status property when
-	   it enables USB2. OTOH, U-Boot does create a new node
-	   when there isn't any. So, just comment it out.
-	*/
-	usb@23000 {
-		status = "disabled";
-		phy_type = "ulpi";
-	};
-};
diff --git a/src/powerpc/p1020mbg-pc_32b.dts b/src/powerpc/p1020mbg-pc_32b.dts
deleted file mode 100644
index ab8f076eae90..000000000000
--- a/src/powerpc/p1020mbg-pc_32b.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * P1020 MBG-PC Device Tree Source (32-bit address map)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1020MBG-PC";
-	compatible = "fsl,P1020MBG-PC";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0x0 0xffe05000 0x0 0x1000>;
-
-		/* NOR and L2 switch */
-		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
-			  0x1 0x0 0x0 0xffa00000 0x00040000
-			  0x2 0x0 0x0 0xffb00000 0x00020000>;
-	};
-
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@ffe09000 {
-		reg = <0x0 0xffe09000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0x0 0xffe0a000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p1020mbg-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1020mbg-pc_36b.dts b/src/powerpc/p1020mbg-pc_36b.dts
deleted file mode 100644
index 9e9f401419b1..000000000000
--- a/src/powerpc/p1020mbg-pc_36b.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * P1020 MBG-PC Device Tree Source (36-bit address map)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1020MBG-PC";
-	compatible = "fsl,P1020MBG-PC";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0x0 0x1000>;
-
-		/* NOR and L2 switch */
-		ranges = <0x0 0x0 0xf 0xec000000 0x04000000
-			  0x1 0x0 0xf 0xffa00000 0x00040000
-			  0x2 0x0 0xf 0xffb00000 0x00020000>;
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p1020mbg-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1020rdb-pc.dtsi b/src/powerpc/p1020rdb-pc.dtsi
deleted file mode 100644
index c952cd37cf6d..000000000000
--- a/src/powerpc/p1020rdb-pc.dtsi
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x1000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 256KB for Vitesse 7385 Switch firmware */
-			reg = <0x0 0x00040000>;
-			label = "NOR Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@40000 {
-			/* 256KB for DTB Image */
-			reg = <0x00040000 0x00040000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@80000 {
-			/* 3.5 MB for Linux Kernel Image */
-			reg = <0x00080000 0x00380000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@400000 {
-			/* 11MB for JFFS2 based Root file System */
-			reg = <0x00400000 0x00b00000>;
-			label = "NOR JFFS2 Root File System";
-		};
-
-		partition@f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x00f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-
-	nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p1020-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x1 0x0 0x40000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND DTB Image";
-		};
-
-		partition@200000 {
-			/* 4MB for Linux Kernel Image */
-			reg = <0x00200000 0x00400000>;
-			label = "NAND Linux Kernel Image";
-		};
-
-		partition@600000 {
-			/* 4MB for Compressed Root file System Image */
-			reg = <0x00600000 0x00400000>;
-			label = "NAND Compressed RFS Image";
-		};
-
-		partition@a00000 {
-			/* 7MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00700000>;
-			label = "NAND JFFS2 Root File System";
-		};
-
-		partition@1100000 {
-			/* 15MB for JFFS2 based Root file System */
-			reg = <0x01100000 0x00f00000>;
-			label = "NAND Writable User area";
-		};
-	};
-
-	L2switch@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "vitesse-7385";
-		reg = <0x2 0x0 0x20000>;
-	};
-
-	cpld@3,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cpld";
-		reg = <0x3 0x0 0x20000>;
-		read-only;
-	};
-};
-
-&soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "pericom,pt7c4338";
-			reg = <0x68>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <40000000>; /* input clock */
-
-			partition@u-boot {
-				/* 512KB for u-boot Bootloader Image */
-				reg = <0x0 0x00080000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@dtb {
-				/* 512KB for DTB Image*/
-				reg = <0x00080000 0x00080000>;
-				label = "dtb";
-			};
-
-			partition@kernel {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00100000 0x00400000>;
-				label = "kernel";
-			};
-
-			partition@fs {
-				/* 4MB for Compressed RFS Image */
-				reg = <0x00500000 0x00400000>;
-				label = "file system";
-			};
-
-			partition@jffs-fs {
-				/* 7MB for JFFS2 based RFS */
-				reg = <0x00900000 0x00700000>;
-				label = "file system jffs2";
-			};
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	/* USB2 is shared with localbus, so it must be disabled
-	   by default. We can't put 'status = "disabled";' here
-	   since U-Boot doesn't clear the status property when
-	   it enables USB2. OTOH, U-Boot does create a new node
-	   when there isn't any. So, just comment it out.
-	usb@23000 {
-		phy_type = "ulpi";
-	};
-	*/
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupt-parent = <&mpic>;
-			interrupts = <3 1>;
-			reg = <0x0>;
-		};
-
-		phy1: ethernet-phy@1 {
-			interrupt-parent = <&mpic>;
-			interrupts = <2 1>;
-			reg = <0x1>;
-		};
-
-		tbi0: tbi-phy@11 {
-			device_type = "tbi-phy";
-			reg = <0x11>;
-		};
-	};
-
-	mdio@25000 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		fixed-link = <1 1 1000 0 0>;
-		phy-connection-type = "rgmii-id";
-
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi1>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
diff --git a/src/powerpc/p1020rdb-pc_32b.dts b/src/powerpc/p1020rdb-pc_32b.dts
deleted file mode 100644
index 4de69b726dc5..000000000000
--- a/src/powerpc/p1020rdb-pc_32b.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * P1020 RDB-PC Device Tree Source (32-bit address map)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1020RDB-PC";
-	compatible = "fsl,P1020RDB-PC";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
-
-		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
-		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xff800000 0x00040000
-			  0x2 0x0 0x0 0xffb00000 0x00020000
-			  0x3 0x0 0x0 0xffa00000 0x00020000>;
-	};
-
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		reg = <0 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p1020rdb-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1020rdb-pc_36b.dts b/src/powerpc/p1020rdb-pc_36b.dts
deleted file mode 100644
index 5237da7441bc..000000000000
--- a/src/powerpc/p1020rdb-pc_36b.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * P1020 RDB-PC Device Tree Source (36-bit address map)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1020RDB-PC";
-	compatible = "fsl,P1020RDB-PC";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
-
-		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
-		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
-			  0x1 0x0 0xf 0xff800000 0x00040000
-			  0x2 0x0 0xf 0xffb00000 0x00040000
-			  0x3 0x0 0xf 0xffa00000 0x00020000>;
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p1020rdb-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1020rdb-pc_camp_core0.dts b/src/powerpc/p1020rdb-pc_camp_core0.dts
deleted file mode 100644
index f411515937ec..000000000000
--- a/src/powerpc/p1020rdb-pc_camp_core0.dts
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * P1020 RDB-PC  Core0 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
- * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
- *
- * Please note to add "-b 0" for core0's dts compiling.
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "p1020rdb-pc_32b.dts"
-
-/ {
-	model = "fsl,P1020RDB-PC";
-	compatible = "fsl,P1020RDB-PC";
-
-	aliases {
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &serial0;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		PowerPC,P1020@1 {
-			status = "disabled";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc@ffe00000 {
-		serial1: serial@4600 {
-			status = "disabled";
-		};
-
-		enet0: ethernet@b0000 {
-			status = "disabled";
-		};
-
-		mpic: pic@40000 {
-			protected-sources = <
-			42 29 30 34	/* serial1, enet0-queue-group0 */
-			17 18 24 45	/* enet0-queue-group1, crypto */
-			>;
-			pic-no-reset;
-		};
-	};
-};
diff --git a/src/powerpc/p1020rdb-pc_camp_core1.dts b/src/powerpc/p1020rdb-pc_camp_core1.dts
deleted file mode 100644
index a91335ad82c2..000000000000
--- a/src/powerpc/p1020rdb-pc_camp_core1.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * P1020 RDB-PC Core1 Device Tree Source in CAMP mode.
- *
- * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
- * can be shared, all the other devices must be assigned to one core only.
- * This dts allows core1 to have l2, eth0, crypto.
- *
- * Please note to add "-b 1" for core1's dts compiling.
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "p1020rdb-pc_32b.dts"
-
-/ {
-	model = "fsl,P1020RDB-PC";
-	compatible = "fsl,P1020RDB-PC";
-
-	aliases {
-		ethernet0 = &enet0;
-		serial0 = &serial1;
-		};
-
-	cpus {
-		PowerPC,P1020@0 {
-			status = "disabled";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	localbus@ffe05000 {
-		status = "disabled";
-	};
-
-	soc@ffe00000 {
-		ecm-law@0 {
-			status = "disabled";
-		};
-
-		ecm@1000 {
-			status = "disabled";
-		};
-
-		memory-controller@2000 {
-			status = "disabled";
-		};
-
-		i2c@3000 {
-			status = "disabled";
-		};
-
-		i2c@3100 {
-			status = "disabled";
-		};
-
-		serial0: serial@4500 {
-			status = "disabled";
-		};
-
-		spi@7000 {
-			status = "disabled";
-		};
-
-		gpio: gpio-controller@f000 {
-			status = "disabled";
-		};
-
-		dma@21300 {
-			status = "disabled";
-		};
-
-		mdio@24000 {
-			status = "disabled";
-		};
-
-		mdio@25000 {
-			status = "disabled";
-		};
-
-		enet1: ethernet@b1000 {
-			status = "disabled";
-		};
-
-		enet2: ethernet@b2000 {
-			status = "disabled";
-		};
-
-		usb@22000 {
-			status = "disabled";
-		};
-
-		sdhci@2e000 {
-			status = "disabled";
-		};
-
-		mpic: pic@40000 {
-			protected-sources = <
-			16 		/* ecm, mem, L2, pci0, pci1 */
-			43 42 59	/* i2c, serial0, spi */
-			47 63 62 	/* gpio, tdm */
-			20 21 22 23	/* dma */
-			03 02 		/* mdio */
-			35 36 40	/* enet1-queue-group0 */
-			51 52 67	/* enet1-queue-group1 */
-			31 32 33	/* enet2-queue-group0 */
-			25 26 27	/* enet2-queue-group1 */
-			28 72 58 	/* usb, sdhci, crypto */
-			0xb0 0xb1 0xb2	/* message */
-			0xb3 0xb4 0xb5
-			0xb6 0xb7
-			0xe0 0xe1 0xe2	/* msi */
-			0xe3 0xe4 0xe5
-			0xe6 0xe7		/* sdhci, crypto , pci */
-			>;
-			pic-no-reset;
-		};
-
-		msi@41600 {
-			status = "disabled";
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			status = "disabled";
-		};
-	};
-
-	pci0: pcie@ffe09000 {
-		status = "disabled";
-	};
-
-	pci1: pcie@ffe0a000 {
-		status = "disabled";
-	};
-};
diff --git a/src/powerpc/p1020rdb-pd.dts b/src/powerpc/p1020rdb-pd.dts
deleted file mode 100644
index 987017ea36b6..000000000000
--- a/src/powerpc/p1020rdb-pd.dts
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * P1020 RDB-PD Device Tree Source (32-bit address map)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1020RDB-PD";
-	compatible = "fsl,P1020RDB-PD";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0x0 0xffe05000 0x0 0x1000>;
-
-		/* NOR, NAND flash, L2 switch and CPLD */
-		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
-			  0x1 0x0 0x0 0xff800000 0x00040000
-			  0x2 0x0 0x0 0xffa00000 0x00020000
-			  0x3 0x0 0x0 0xffb00000 0x00020000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x4000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				/* 128KB for DTB Image */
-				reg = <0x0 0x00020000>;
-				label = "NOR DTB Image";
-			};
-
-			partition@20000 {
-				/* 3.875 MB for Linux Kernel Image */
-				reg = <0x00020000 0x003e0000>;
-				label = "NOR Linux Kernel Image";
-			};
-
-			partition@400000 {
-				/* 58MB for Root file System */
-				reg = <0x00400000 0x03a00000>;
-				label = "NOR Root File System";
-			};
-
-			partition@3e00000 {
-				/* This location must not be altered  */
-				/* 1M for Vitesse 7385 Switch firmware */
-				reg = <0x3e00000 0x00100000>;
-				label = "NOR Vitesse-7385 Firmware";
-				read-only;
-			};
-
-			partition@3f00000 {
-				/* This location must not be altered  */
-				/* 512KB for u-boot Bootloader Image */
-				/* 512KB for u-boot Environment Variables */
-				reg = <0x03f00000 0x00100000>;
-				label = "NOR U-Boot Image";
-				read-only;
-			};
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1020-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x40000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 1MB for DTB Image */
-				reg = <0x00100000 0x00100000>;
-				label = "NAND DTB Image";
-			};
-
-			partition@200000 {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00200000 0x00400000>;
-				label = "NAND Linux Kernel Image";
-			};
-
-			partition@600000 {
-				/* 122MB for File System Image */
-				reg = <0x00600000 0x07a00000>;
-				label = "NAND File System Image";
-			};
-		};
-
-		cpld@2,0 {
-			compatible = "fsl,p1020rdb-pd-cpld";
-			reg = <0x2 0x0 0x20000>;
-		};
-
-		L2switch@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "vitesse-7385";
-			reg = <0x3 0x0 0x20000>;
-		};
-	};
-
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-			};
-		};
-
-		spi@7000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				/* input clock */
-				spi-max-frequency = <40000000>;
-
-				partition@0 {
-					/* 512KB for u-boot Bootloader Image */
-					reg = <0x0 0x00080000>;
-					label = "SPI U-Boot Image";
-					read-only;
-				};
-
-				partition@80000 {
-					/* 512KB for DTB Image*/
-					reg = <0x00080000 0x00080000>;
-					label = "SPI DTB Image";
-				};
-
-				partition@100000 {
-					/* 4MB for Linux Kernel Image */
-					reg = <0x00100000 0x00400000>;
-					label = "SPI Linux Kernel Image";
-				};
-
-				partition@500000 {
-					/* 11MB for FS System Image */
-					reg = <0x00500000 0x00b00000>;
-					label = "SPI File System Image";
-				};
-			};
-
-			slic@0 {
-				compatible = "zarlink,le88266";
-				reg = <1>;
-				spi-max-frequency = <8000000>;
-			};
-
-			slic@1 {
-				compatible = "zarlink,le88266";
-				reg = <2>;
-				spi-max-frequency = <8000000>;
-			};
-		};
-
-		mdio@24000 {
-			phy0: ethernet-phy@0 {
-				interrupts = <3 1 0 0>;
-				reg = <0x0>;
-			};
-
-			phy1: ethernet-phy@1 {
-				interrupts = <2 1 0 0>;
-				reg = <0x1>;
-			};
-		};
-
-		mdio@25000 {
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		mdio@26000 {
-			tbi2: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet0: ethernet@b0000 {
-			fixed-link = <1 1 1000 0 0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		enet1: ethernet@b1000 {
-			phy-handle = <&phy0>;
-			tbi-handle = <&tbi1>;
-			phy-connection-type = "sgmii";
-		};
-
-		enet2: ethernet@b2000 {
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-		};
-	};
-
-	pci0: pcie@ffe09000 {
-		reg = <0x0 0xffe09000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0x0 0xffe0a000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1020rdb.dts b/src/powerpc/p1020rdb.dts
deleted file mode 100644
index 518bf99b1f50..000000000000
--- a/src/powerpc/p1020rdb.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * P1020 RDB Device Tree Source
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1020RDB";
-	compatible = "fsl,P1020RDB";
-
-	memory {
-		device_type = "memory";
-	};
-
-	board_lbc: lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
-
-		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
-		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xffa00000 0x00040000
-			  0x2 0x0 0x0 0xffb00000 0x00020000>;
-	};
-
-	board_soc: soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		reg = <0 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p1020rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1020rdb.dtsi b/src/powerpc/p1020rdb.dtsi
deleted file mode 100644
index 1fb7e0e0940f..000000000000
--- a/src/powerpc/p1020rdb.dtsi
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x1000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 256KB for Vitesse 7385 Switch firmware */
-			reg = <0x0 0x00040000>;
-			label = "NOR (RO) Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@40000 {
-			/* 256KB for DTB Image */
-			reg = <0x00040000 0x00040000>;
-			label = "NOR (RO) DTB Image";
-			read-only;
-		};
-
-		partition@80000 {
-			/* 3.5 MB for Linux Kernel Image */
-			reg = <0x00080000 0x00380000>;
-			label = "NOR (RO) Linux Kernel Image";
-			read-only;
-		};
-
-		partition@400000 {
-			/* 11MB for JFFS2 based Root file System */
-			reg = <0x00400000 0x00b00000>;
-			label = "NOR (RW) JFFS2 Root File System";
-		};
-
-		partition@f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x00f00000 0x00100000>;
-			label = "NOR (RO) U-Boot Image";
-			read-only;
-		};
-	};
-
-	nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p1020-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x1 0x0 0x40000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND (RO) U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND (RO) DTB Image";
-			read-only;
-		};
-
-		partition@200000 {
-			/* 4MB for Linux Kernel Image */
-			reg = <0x00200000 0x00400000>;
-			label = "NAND (RO) Linux Kernel Image";
-			read-only;
-		};
-
-		partition@600000 {
-			/* 4MB for Compressed Root file System Image */
-			reg = <0x00600000 0x00400000>;
-			label = "NAND (RO) Compressed RFS Image";
-			read-only;
-		};
-
-		partition@a00000 {
-			/* 7MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00700000>;
-			label = "NAND (RW) JFFS2 Root File System";
-		};
-
-		partition@1100000 {
-			/* 15MB for JFFS2 based Root file System */
-			reg = <0x01100000 0x00f00000>;
-			label = "NAND (RW) Writable User area";
-		};
-	};
-
-	L2switch@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "vitesse-7385";
-		reg = <0x2 0x0 0x20000>;
-	};
-};
-
-&board_soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "dallas,ds1339";
-			reg = <0x68>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <40000000>; /* input clock */
-
-			partition@u-boot {
-				/* 512KB for u-boot Bootloader Image */
-				reg = <0x0 0x00080000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@dtb {
-				/* 512KB for DTB Image */
-				reg = <0x00080000 0x00080000>;
-				label = "dtb";
-				read-only;
-			};
-
-			partition@kernel {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00100000 0x00400000>;
-				label = "kernel";
-				read-only;
-			};
-
-			partition@fs {
-				/* 4MB for Compressed RFS Image */
-				reg = <0x00500000 0x00400000>;
-				label = "file system";
-				read-only;
-			};
-
-			partition@jffs-fs {
-				/* 7MB for JFFS2 based RFS */
-				reg = <0x00900000 0x00700000>;
-				label = "file system jffs2";
-			};
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-		dr_mode = "host";
-	};
-
-	/* USB2 is shared with localbus. It is used
-	   only in case of SPI and SD boot after
-	   appropriate device-tree fixup done by uboot */
-	usb@23000 {
-		phy_type = "ulpi";
-		dr_mode = "host";
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupt-parent = <&mpic>;
-			interrupts = <3 1>;
-			reg = <0x0>;
-		};
-
-		phy1: ethernet-phy@1 {
-			interrupt-parent = <&mpic>;
-			interrupts = <2 1>;
-			reg = <0x1>;
-		};
-
-		tbi-phy@2 {
-			device_type = "tbi-phy";
-			reg = <0x2>;
-		};
-	};
-
-	mdio@25000 {
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		fixed-link = <1 1 1000 0 0>;
-		phy-connection-type = "rgmii-id";
-
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi0>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
diff --git a/src/powerpc/p1020rdb_36b.dts b/src/powerpc/p1020rdb_36b.dts
deleted file mode 100644
index bdbdb6097e57..000000000000
--- a/src/powerpc/p1020rdb_36b.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * P1020 RDB Device Tree Source (36-bit address map)
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1020RDB";
-	compatible = "fsl,P1020RDB";
-
-	memory {
-		device_type = "memory";
-	};
-
-	board_lbc: lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
-
-		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
-		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
-			  0x1 0x0 0xf 0xffa00000 0x00040000
-			  0x2 0x0 0xf 0xffb00000 0x00020000>;
-	};
-
-	board_soc: soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p1020rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1020utm-pc.dtsi b/src/powerpc/p1020utm-pc.dtsi
deleted file mode 100644
index 7ea85eabcc5c..000000000000
--- a/src/powerpc/p1020utm-pc.dtsi
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x2000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* 256KB for DTB Image */
-			reg = <0x0 0x00040000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@40000 {
-			/* 3.75 MB for Linux Kernel Image */
-			reg = <0x00040000 0x003c0000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@400000 {
-			/* 27MB for Root file System */
-			reg = <0x00400000 0x01b00000>;
-			label = "NOR Root File System";
-		};
-
-		partition@1f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x01f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-};
-
-&soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "dallas,ds1339";
-			reg = <0x68>;
-		};
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <2 1 0 0>;
-			reg = <0x1>;
-		};
-		phy2: ethernet-phy@2 {
-			interrupts = <1 1 0 0>;
-			reg = <0x2>;
-		};
-	};
-
-	mdio@25000 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26000 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		phy-handle = <&phy2>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi1>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	/* USB2 is shared with localbus, so it must be disabled
-	   by default. We can't put 'status = "disabled";' here
-	   since U-Boot doesn't clear the status property when
-	   it enables USB2. OTOH, U-Boot does create a new node
-	   when there isn't any. So, just comment it out.
-	*/
-	usb@23000 {
-		status = "disabled";
-		phy_type = "ulpi";
-	};
-};
diff --git a/src/powerpc/p1020utm-pc_32b.dts b/src/powerpc/p1020utm-pc_32b.dts
deleted file mode 100644
index 4bfdd8971cdb..000000000000
--- a/src/powerpc/p1020utm-pc_32b.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * P1020 UTM-PC Device Tree Source (32-bit address map)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1020UTM-PC";
-	compatible = "fsl,P1020UTM-PC";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0x0 0xffe05000 0x0 0x1000>;
-
-		/* NOR */
-		ranges = <0x0 0x0 0x0 0xec000000 0x02000000
-			  0x1 0x0 0x0 0xffa00000 0x00040000
-			  0x2 0x0 0x0 0xffb00000 0x00020000>;
-	};
-
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@ffe09000 {
-		reg = <0x0 0xffe09000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0x0 0xffe0a000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p1020utm-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1020utm-pc_36b.dts b/src/powerpc/p1020utm-pc_36b.dts
deleted file mode 100644
index abec53557501..000000000000
--- a/src/powerpc/p1020utm-pc_36b.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * P1020 UTM-PC Device Tree Source (36-bit address map)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1020UTM-PC";
-	compatible = "fsl,P1020UTM-PC";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0x0 0x1000>;
-
-		/* NOR */
-		ranges = <0x0 0x0 0xf 0xec000000 0x02000000
-			  0x1 0x0 0xf 0xffa00000 0x00040000
-			  0x2 0x0 0xf 0xffb00000 0x00020000>;
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0x0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p1020utm-pc.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1021mds.dts b/src/powerpc/p1021mds.dts
deleted file mode 100644
index 76559044df41..000000000000
--- a/src/powerpc/p1021mds.dts
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * P1021 MDS Device Tree Source
- *
- * Copyright 2010,2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p1021si-pre.dtsi"
-/ {
-	model = "fsl,P1021";
-	compatible = "fsl,P1021MDS";
-
-	aliases {
-		ethernet3 = &enet3;
-		ethernet4 = &enet4;
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0x0 0xffe05000 0x0 0x1000>;
-
-		/* NAND Flash, BCSR, PMC0/1*/
-		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
-			  0x1 0x0 0x0 0xf8000000 0x00008000
-			  0x2 0x0 0x0 0xf8010000 0x00020000
-			  0x3 0x0 0x0 0xf8020000 0x00020000>;
-
-		nand@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1021-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x0 0x0 0x40000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND (RO) U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 1MB for DTB Image */
-				reg = <0x00100000 0x00100000>;
-				label = "NAND (RO) DTB Image";
-				read-only;
-			};
-
-			partition@200000 {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00200000 0x00400000>;
-				label = "NAND (RO) Linux Kernel Image";
-				read-only;
-			};
-
-			partition@600000 {
-				/* 5MB for Compressed Root file System Image */
-				reg = <0x00600000 0x00500000>;
-				label = "NAND (RO) Compressed RFS Image";
-				read-only;
-			};
-
-			partition@b00000 {
-				/* 6MB for JFFS2 based Root file System */
-				reg = <0x00a00000 0x00600000>;
-				label = "NAND (RW) JFFS2 Root File System";
-			};
-
-			partition@1100000 {
-				/* 14MB for JFFS2 based Root file System */
-				reg = <0x01100000 0x00e00000>;
-				label = "NAND (RW) Writable User area";
-			};
-
-			partition@1f00000 {
-				/* 1MB for microcode */
-				reg = <0x01f00000 0x00100000>;
-				label = "NAND (RO) QE Ucode";
-				read-only;
-			};
-		};
-
-		bcsr@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1021mds-bcsr";
-			reg = <1 0 0x8000>;
-			ranges = <0 1 0 0x8000>;
-		};
-
-		pib@2,0 {
-			compatible = "fsl,p1021mds-pib";
-			reg = <2 0 0x10000>;
-		};
-
-		pib@3,0 {
-			compatible = "fsl,p1021mds-pib";
-			reg = <3 0 0x10000>;
-		};
-	};
-
-	soc: soc@ffe00000 {
-		compatible = "fsl,p1021-immr", "simple-bus";
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		spi@7000 {
-
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-
-				partition@u-boot {
-					label = "u-boot-spi";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@kernel {
-					label = "kernel-spi";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@dtb {
-					label = "dtb-spi";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@fs {
-					label = "file system-spi";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-			dr_mode = "host";
-		};
-
-		mdio@24000 {
-			phy0: ethernet-phy@0 {
-				interrupts = <1 1 0 0>;
-				reg = <0x0>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupts = <2 1 0 0>;
-				reg = <0x1>;
-			};
-			phy4: ethernet-phy@4 {
-				reg = <0x4>;
-			};
-			tbi-phy@5 {
-				device_type = "tbi-phy";
-				reg = <0x5>;
-			};
-		};
-
-		mdio@25000 {
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		ethernet@b0000 {
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		ethernet@b1000 {
-			phy-handle = <&phy4>;
-			tbi-handle = <&tbi0>;
-			phy-connection-type = "sgmii";
-		};
-
-		ethernet@b2000 {
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		par_io@e0100 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0xe0100 0x60>;
-			ranges = <0x0 0xe0100 0x60>;
-			device_type = "par_io";
-			num-ports = <3>;
-			pio1: ucc_pin@01 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
-					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
-					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
-					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
-					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
-					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
-					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
-					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
-					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
-					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
-					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
-					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
-					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
-					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
-					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
-					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
-					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
-					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
-			};
-
-			pio2: ucc_pin@02 {
-				pio-map = <
-			/* port  pin  dir  open_drain  assignment  has_irq */
-					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
-					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
-					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
-					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
-					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
-					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
-					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
-					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
-					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
-					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
-			};
-		};
-	};
-
-	pci0: pcie@ffe09000 {
-		reg = <0 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	qe: qe@ffe80000 {
-		ranges = <0x0 0x0 0xffe80000 0x40000>;
-		reg = <0 0xffe80000 0 0x480>;
-		brg-frequency = <0>;
-		bus-frequency = <0>;
-		status = "disabled"; /* no firmware loaded */
-
-		enet3: ucc@2000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "clk12";
-			tx-clock-name = "clk9";
-			pio-handle = <&pio1>;
-			phy-handle = <&qe_phy0>;
-			phy-connection-type = "mii";
-		};
-
-		mdio@2120 {
-			qe_phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <4 1 0 0>;
-				reg = <0x0>;
-			};
-			qe_phy1: ethernet-phy@03 {
-				interrupt-parent = <&mpic>;
-				interrupts = <5 1 0 0>;
-				reg = <0x3>;
-			};
-			tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet4: ucc@2400 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			rx-clock-name = "none";
-			tx-clock-name = "clk13";
-			pio-handle = <&pio2>;
-			phy-handle = <&qe_phy1>;
-			phy-connection-type = "rmii";
-		};
-	};
-};
-
-/include/ "fsl/p1021si-post.dtsi"
diff --git a/src/powerpc/p1021rdb-pc.dtsi b/src/powerpc/p1021rdb-pc.dtsi
deleted file mode 100644
index d6274c58f496..000000000000
--- a/src/powerpc/p1021rdb-pc.dtsi
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x1000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 256KB for Vitesse 7385 Switch firmware */
-			reg = <0x0 0x00040000>;
-			label = "NOR Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@40000 {
-			/* 256KB for DTB Image */
-			reg = <0x00040000 0x00040000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@80000 {
-			/* 3.5 MB for Linux Kernel Image */
-			reg = <0x00080000 0x00380000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@400000 {
-			/* 10.75MB for JFFS2 based Root file System */
-			reg = <0x00400000 0x00ac0000>;
-			label = "NOR JFFS2 Root File System";
-		};
-
-		partition@ec0000 {
-			/* This location must not be altered  */
-			/* 256KB for QE ucode firmware*/
-			reg = <0x00ec0000 0x00040000>;
-			label = "NOR QE microcode firmware";
-			read-only;
-		};
-
-		partition@f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x00f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-		};
-	};
-
-	nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p1021-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x1 0x0 0x40000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND DTB Image";
-		};
-
-		partition@200000 {
-			/* 4MB for Linux Kernel Image */
-			reg = <0x00200000 0x00400000>;
-			label = "NAND Linux Kernel Image";
-		};
-
-		partition@600000 {
-			/* 4MB for Compressed Root file System Image */
-			reg = <0x00600000 0x00400000>;
-			label = "NAND Compressed RFS Image";
-		};
-
-		partition@a00000 {
-			/* 7MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00700000>;
-			label = "NAND JFFS2 Root File System";
-		};
-
-		partition@1100000 {
-			/* 15MB for User Writable Area  */
-			reg = <0x01100000 0x00f00000>;
-			label = "NAND Writable User area";
-		};
-	};
-
-	L2switch@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "vitesse-7385";
-		reg = <0x2 0x0 0x20000>;
-	};
-};
-
-&soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "pericom,pt7c4338";
-			reg = <0x68>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <40000000>; /* input clock */
-
-			partition@u-boot {
-				/* 512KB for u-boot Bootloader Image */
-				reg = <0x0 0x00080000>;
-				label = "SPI Flash U-Boot Image";
-				read-only;
-			};
-
-			partition@dtb {
-				/* 512KB for DTB Image */
-				reg = <0x00080000 0x00080000>;
-				label = "SPI Flash DTB Image";
-			};
-
-			partition@kernel {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00100000 0x00400000>;
-				label = "SPI Flash Linux Kernel Image";
-			};
-
-			partition@fs {
-				/* 4MB for Compressed RFS Image */
-				reg = <0x00500000 0x00400000>;
-				label = "SPI Flash Compressed RFSImage";
-			};
-
-			partition@jffs-fs {
-				/* 7MB for JFFS2 based RFS */
-				reg = <0x00900000 0x00700000>;
-				label = "SPI Flash JFFS2 RFS";
-			};
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupt-parent = <&mpic>;
-			interrupts = <3 1 0 0>;
-			reg = <0x0>;
-		};
-
-		phy1: ethernet-phy@1 {
-			interrupt-parent = <&mpic>;
-			interrupts = <2 1 0 0>;
-			reg = <0x1>;
-		};
-
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@25000 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26000 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		fixed-link = <1 1 1000 0 0>;
-		phy-connection-type = "rgmii-id";
-
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi1>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy1>;
-		tbi-handle = <&tbi2>;
-		phy-connection-type = "rgmii-id";
-	};
-};
diff --git a/src/powerpc/p1021rdb-pc_32b.dts b/src/powerpc/p1021rdb-pc_32b.dts
deleted file mode 100644
index 7cefa12b629a..000000000000
--- a/src/powerpc/p1021rdb-pc_32b.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * P1021 RDB Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1021si-pre.dtsi"
-/ {
-	model = "fsl,P1021RDB";
-	compatible = "fsl,P1021RDB-PC";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
-
-		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
-		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xff800000 0x00040000
-			  0x2 0x0 0x0 0xffb00000 0x00020000>;
-	};
-
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		reg = <0 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	qe: qe@ffe80000 {
-                ranges = <0x0 0x0 0xffe80000 0x40000>;
-                reg = <0 0xffe80000 0 0x480>;
-                brg-frequency = <0>;
-                bus-frequency = <0>;
-        };
-};
-
-/include/ "p1021rdb-pc.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
diff --git a/src/powerpc/p1021rdb-pc_36b.dts b/src/powerpc/p1021rdb-pc_36b.dts
deleted file mode 100644
index 53d0c889039c..000000000000
--- a/src/powerpc/p1021rdb-pc_36b.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * P1021 RDB Device Tree Source (36-bit address map)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1021si-pre.dtsi"
-/ {
-	model = "fsl,P1021RDB";
-	compatible = "fsl,P1021RDB-PC";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
-
-		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
-		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
-			  0x1 0x0 0xf 0xff800000 0x00040000
-			  0x2 0x0 0xf 0xffb00000 0x00020000>;
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe09000 {
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		reg = <0xf 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	qe: qe@fffe80000 {
-                ranges = <0x0 0xf 0xffe80000 0x40000>;
-                reg = <0xf 0xffe80000 0 0x480>;
-                brg-frequency = <0>;
-                bus-frequency = <0>;
-        };
-};
-
-/include/ "p1021rdb-pc.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
diff --git a/src/powerpc/p1022ds.dtsi b/src/powerpc/p1022ds.dtsi
deleted file mode 100644
index 957e0dc1dc0f..000000000000
--- a/src/powerpc/p1022ds.dtsi
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			reg = <0x0 0x03000000>;
-			label = "ramdisk-nor";
-			read-only;
-		};
-
-		partition@3000000 {
-			reg = <0x03000000 0x00e00000>;
-			label = "diagnostic-nor";
-			read-only;
-		};
-
-		partition@3e00000 {
-			reg = <0x03e00000 0x00200000>;
-			label = "dink-nor";
-			read-only;
-		};
-
-		partition@4000000 {
-			reg = <0x04000000 0x00400000>;
-			label = "kernel-nor";
-			read-only;
-		};
-
-		partition@4400000 {
-			reg = <0x04400000 0x03b00000>;
-			label = "jffs2-nor";
-		};
-
-		partition@7f00000 {
-			reg = <0x07f00000 0x00080000>;
-			label = "dtb-nor";
-			read-only;
-		};
-
-		partition@7f80000 {
-			reg = <0x07f80000 0x00080000>;
-			label = "u-boot-nor";
-			read-only;
-		};
-	};
-
-	nand@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,elbc-fcm-nand";
-		reg = <0x2 0x0 0x40000>;
-
-		partition@0 {
-			reg = <0x0 0x02000000>;
-			label = "u-boot-nand";
-			read-only;
-		};
-
-		partition@2000000 {
-			reg = <0x02000000 0x10000000>;
-			label = "jffs2-nand";
-		};
-
-		partition@12000000 {
-			reg = <0x12000000 0x10000000>;
-			label = "ramdisk-nand";
-			read-only;
-		};
-
-		partition@22000000 {
-			reg = <0x22000000 0x04000000>;
-			label = "kernel-nand";
-		};
-
-		partition@26000000 {
-			reg = <0x26000000 0x01000000>;
-			label = "dtb-nand";
-			read-only;
-		};
-
-		partition@27000000 {
-			reg = <0x27000000 0x19000000>;
-			label = "reserved-nand";
-		};
-	};
-
-	board-control@3,0 {
-		compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
-		reg = <3 0 0x30>;
-		interrupt-parent = <&mpic>;
-		/*
-		 * IRQ8 is generated if the "EVENT" switch is pressed
-		 * and PX_CTL[EVESEL] is set to 00.
-		 */
-		interrupts = <8 0 0 0>;
-	};
-};
-
-&board_soc {
-	i2c@3100 {
-		wm8776:codec@1a {
-			compatible = "wlf,wm8776";
-			reg = <0x1a>;
-			/*
-			 * clock-frequency will be set by U-Boot if
-			 * the clock is enabled.
-			 */
-		};
-		rtc@68 {
-			compatible = "dallas,ds3232";
-			reg = <0x68>;
-			interrupts = <0x1 0x1 0 0>;
-		};
-		adt7461@4c {
-			compatible = "adi,adt7461";
-			reg = <0x4c>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <40000000>; /* input clock */
-
-			partition@0 {
-				label = "u-boot-spi";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "kernel-spi";
-				reg = <0x00100000 0x00500000>;
-				read-only;
-			};
-			partition@600000 {
-				label = "dtb-spi";
-				reg = <0x00600000 0x00100000>;
-				read-only;
-			};
-			partition@700000 {
-				label = "file system-spi";
-				reg = <0x00700000 0x00900000>;
-			};
-		};
-	};
-
-	ssi@15000 {
-		fsl,mode = "i2s-slave";
-		codec-handle = <&wm8776>;
-		fsl,ssi-asynchronous;
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	usb@23000 {
-		status = "disabled";
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
-			reg = <0x1>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <9 1 0 0>;
-			reg = <0x2>;
-		};
-		tbi-phy@2 {
-			device_type = "tbi-phy";
-			reg = <0x2>;
-		};
-	};
-
-	ethernet@b0000 {
-		phy-handle = <&phy0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	ethernet@b1000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
diff --git a/src/powerpc/p1022ds_32b.dts b/src/powerpc/p1022ds_32b.dts
deleted file mode 100644
index d96cae00a9e3..000000000000
--- a/src/powerpc/p1022ds_32b.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * P1022 DS 32-bit Physical Address Map Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1022si-pre.dtsi"
-/ {
-	model = "fsl,P1022DS";
-	compatible = "fsl,P1022DS";
-
-	memory {
-		device_type = "memory";
-	};
-
-	board_lbc: lbc: localbus@ffe05000 {
-		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
-			  0x1 0x0 0x0 0xe0000000 0x08000000
-			  0x2 0x0 0x0 0xff800000 0x00040000
-			  0x3 0x0 0x0 0xffdf0000 0x00008000>;
-		reg = <0x0 0xffe05000 0 0x1000>;
-	};
-
-	board_soc: soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		reg = <0x0 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@ffe0b000 {
-		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		reg = <0 0xffe0b000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p1022si-post.dtsi"
-/include/ "p1022ds.dtsi"
diff --git a/src/powerpc/p1022ds_36b.dts b/src/powerpc/p1022ds_36b.dts
deleted file mode 100644
index f7aacce40bf6..000000000000
--- a/src/powerpc/p1022ds_36b.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * P1022 DS 36-bit Physical Address Map Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1022si-pre.dtsi"
-/ {
-	model = "fsl,P1022DS";
-	compatible = "fsl,P1022DS";
-
-	memory {
-		device_type = "memory";
-	};
-
-	board_lbc: lbc: localbus@fffe05000 {
-		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
-			  0x1 0x0 0xf 0xe0000000 0x08000000
-			  0x2 0x0 0xf 0xff800000 0x00040000
-			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
-		reg = <0xf 0xffe05000 0 0x1000>;
-	};
-
-	board_soc: soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe09000 {
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		reg = <0xf 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@fffe0b000 {
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		reg = <0xf 0xffe0b000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p1022si-post.dtsi"
-/include/ "p1022ds.dtsi"
diff --git a/src/powerpc/p1022rdk.dts b/src/powerpc/p1022rdk.dts
deleted file mode 100644
index 51d82de223f3..000000000000
--- a/src/powerpc/p1022rdk.dts
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * P1022 RDK 32-bit Physical Address Map Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1022si-pre.dtsi"
-/ {
-	model = "fsl,P1022RDK";
-	compatible = "fsl,P1022RDK";
-
-	memory {
-		device_type = "memory";
-	};
-
-	board_lbc: lbc: localbus@ffe05000 {
-		/* The P1022 RDK does not have any localbus devices */
-		status = "disabled";
-	};
-
-	board_soc: soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-
-		i2c@3100 {
-			wm8960:codec@1a {
-				compatible = "wlf,wm8960";
-				reg = <0x1a>;
-				/* MCLK source is a stand-alone oscillator */
-				clock-frequency = <12288000>;
-			};
-			rtc@68 {
-				compatible = "stm,m41t62";
-				reg = <0x68>;
-			};
-			adt7461@4c{
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-			zl6100@21{
-				compatible = "isil,zl6100";
-				reg = <0x21>;
-			};
-			zl6100@24{
-				compatible = "isil,zl6100";
-				reg = <0x24>;
-			};
-			zl6100@26{
-				compatible = "isil,zl6100";
-				reg = <0x26>;
-			};
-			zl6100@29{
-				compatible = "isil,zl6100";
-				reg = <0x29>;
-			};
-		};
-
-		spi@7000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,m25p80";
-				reg = <0>;
-				spi-max-frequency = <1000000>;
-				partition@0 {
-					label = "full-spi-flash";
-					reg = <0x00000000 0x00100000>;
-				};
-			};
-		};
-
-		ssi@15000 {
-			fsl,mode = "i2s-slave";
-			codec-handle = <&wm8960>;
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-		};
-
-		usb@23000 {
-			phy_type = "ulpi";
-		};
-
-		mdio@24000 {
-			phy0: ethernet-phy@0 {
-				interrupts = <3 1 0 0>;
-				reg = <0x1>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupts = <9 1 0 0>;
-				reg = <0x2>;
-			};
-		};
-
-		mdio@25000 {
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		ethernet@b0000 {
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		ethernet@b1000 {
-			phy-handle = <&phy1>;
-			tbi-handle = <&tbi0>;
-			phy-connection-type = "sgmii";
-		};
-	};
-
-	pci0: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		reg = <0x0 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@ffe0b000 {
-		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		reg = <0 0xffe0b000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p1022si-post.dtsi"
diff --git a/src/powerpc/p1023rdb.dts b/src/powerpc/p1023rdb.dts
deleted file mode 100644
index 0a06a88ddbd5..000000000000
--- a/src/powerpc/p1023rdb.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * P1023 RDB Device Tree Source
- *
- *    Copyright 2013 Freescale Semiconductor Inc.
- *
- * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1023si-pre.dtsi"
-
-/ {
-	model = "fsl,P1023";
-	compatible = "fsl,P1023RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	soc: soc@ff600000 {
-		ranges = <0x0 0x0 0xff600000 0x200000>;
-
-		i2c@3000 {
-			eeprom@53 {
-				compatible = "at24,24c04";
-				reg = <0x53>;
-			};
-
-			rtc@6f {
-				compatible = "microchip,mcp7941x";
-				reg = <0x6f>;
-			};
-		};
-
-		usb@22000 {
-			dr_mode = "host";
-			phy_type = "ulpi";
-		};
-	};
-
-	lbc: localbus@ff605000 {
-		reg = <0 0xff605000 0 0x1000>;
-
-		/* NOR, NAND Flashes */
-		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
-			  0x1 0x0 0x0 0xffa00000 0x08000000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x04000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				/* 48MB for Root File System */
-				reg = <0x00000000 0x03000000>;
-				label = "NOR Root File System";
-			};
-
-			partition@3000000 {
-				/* 1MB for DTB Image */
-				reg = <0x03000000 0x00100000>;
-				label = "NOR DTB Image";
-			};
-
-			partition@3100000 {
-				/* 14MB for Linux Kernel Image */
-				reg = <0x03100000 0x00e00000>;
-				label = "NOR Linux Kernel Image";
-			};
-
-			partition@3f00000 {
-				/* This location must not be altered  */
-				/* 512KB for u-boot Bootloader Image */
-				/* 512KB for u-boot Environment Variables */
-				reg = <0x03f00000 0x00100000>;
-				label = "NOR U-Boot Image";
-				read-only;
-			};
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x40000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 1MB for DTB Image */
-				reg = <0x00100000 0x00100000>;
-				label = "NAND DTB Image";
-			};
-
-			partition@200000 {
-				/* 14MB for Linux Kernel Image */
-				reg = <0x00200000 0x00e00000>;
-				label = "NAND Linux Kernel Image";
-			};
-
-			partition@1000000 {
-				/* 96MB for Root File System Image */
-				reg = <0x01000000 0x06000000>;
-				label = "NAND Root File System";
-			};
-
-			partition@7000000 {
-				/* 16MB for User Writable Area */
-				reg = <0x07000000 0x01000000>;
-				label = "NAND Writable User area";
-			};
-		};
-	};
-
-	pci0: pcie@ff60a000 {
-		reg = <0 0xff60a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		pcie@0 {
-			/* IRQ[0:3] are pulled up on board, set to active-low */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 0 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	board_pci1: pci1: pcie@ff609000 {
-		reg = <0 0xff609000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			/*
-			 * IRQ[4:6] only for PCIe, set to active-high,
-			 * IRQ[7] is pulled up on board, set to active-low
-			 */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 2 0 0
-				0000 0 0 2 &mpic 5 2 0 0
-				0000 0 0 3 &mpic 6 2 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@ff60b000 {
-		reg = <0 0xff60b000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			/*
-			 * IRQ[8:10] are pulled up on board, set to active-low
-			 * IRQ[11] only for PCIe, set to active-high,
-			 */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 8 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 2 0 0
-				>;
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-};
-
-/include/ "fsl/p1023si-post.dtsi"
diff --git a/src/powerpc/p1023rds.dts b/src/powerpc/p1023rds.dts
deleted file mode 100644
index beb6cb12e59d..000000000000
--- a/src/powerpc/p1023rds.dts
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * P1023 RDS Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Author: Roy Zang <tie-fei.zang@freescale.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1023si-pre.dtsi"
-
-/ {
-	model = "fsl,P1023";
-	compatible = "fsl,P1023RDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	soc: soc@ff600000 {
-		ranges = <0x0 0x0 0xff600000 0x200000>;
-
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		spi@7000 {
-			fsl_dataflash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at45db081d";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@u-boot {
-					/* 512KB for u-boot Bootloader Image */
-					label = "u-boot-spi";
-					reg = <0x00000000 0x00080000>;
-					read-only;
-				};
-				partition@dtb {
-					/* 512KB for DTB Image */
-					label = "dtb-spi";
-					reg = <0x00080000 0x00080000>;
-					read-only;
-				};
-			};
-		};
-
-		usb@22000 {
-			dr_mode = "host";
-			phy_type = "ulpi";
-		};
-	};
-
-	lbc: localbus@ff605000 {
-		reg = <0 0xff605000 0 0x1000>;
-
-		/* NOR Flash, BCSR */
-		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-			  0x1 0x0 0x0 0xe0000000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x02000000>;
-			bank-width = <2>;
-			device-width = <1>;
-			partition@0 {
-				label = "ramdisk";
-				reg = <0x00000000 0x01c00000>;
-			};
-			partition@1c00000 {
-				label = "kernel";
-				reg = <0x01c00000 0x002e0000>;
-			};
-			partiton@1ee0000 {
-				label = "dtb";
-				reg = <0x01ee0000 0x00020000>;
-			};
-			partition@1f00000 {
-				label = "firmware";
-				reg = <0x01f00000 0x00080000>;
-				read-only;
-			};
-			partition@1f80000 {
-				label = "u-boot";
-				reg = <0x01f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		fpga@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1023rds-fpga";
-			reg = <1 0 0x8000>;
-			ranges = <0 1 0 0x8000>;
-
-			bcsr@20 {
-				compatible = "fsl,p1023rds-bcsr";
-				reg = <0x20 0x20>;
-			};
-		};
-	};
-
-	pci0: pcie@ff60a000 {
-		reg = <0 0xff60a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		pcie@0 {
-			/* IRQ[0:3] are pulled up on board, set to active-low */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 0 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	board_pci1: pci1: pcie@ff609000 {
-		reg = <0 0xff609000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			/*
-			 * IRQ[4:6] only for PCIe, set to active-high,
-			 * IRQ[7] is pulled up on board, set to active-low
-			 */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 2 0 0
-				0000 0 0 2 &mpic 5 2 0 0
-				0000 0 0 3 &mpic 6 2 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@ff60b000 {
-		reg = <0 0xff60b000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			/*
-			 * IRQ[8:10] are pulled up on board, set to active-low
-			 * IRQ[11] only for PCIe, set to active-high,
-			 */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 8 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 2 0 0
-				>;
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p1023si-post.dtsi"
diff --git a/src/powerpc/p1024rdb.dtsi b/src/powerpc/p1024rdb.dtsi
deleted file mode 100644
index b05dcb40f800..000000000000
--- a/src/powerpc/p1024rdb.dtsi
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * P1024 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x1000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 256KB for Vitesse 7385 Switch firmware */
-			reg = <0x0 0x00040000>;
-			label = "NOR Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@40000 {
-			/* 256KB for DTB Image */
-			reg = <0x00040000 0x00040000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@80000 {
-			/* 3.5 MB for Linux Kernel Image */
-			reg = <0x00080000 0x00380000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@400000 {
-			/* 11MB for JFFS2 based Root file System */
-			reg = <0x00400000 0x00b00000>;
-			label = "NOR JFFS2 Root File System";
-		};
-
-		partition@f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x00f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-
-	nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p1020-fcm-nand",
-				 "fsl,elbc-fcm-nand";
-		reg = <0x1 0x0 0x40000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND DTB Image";
-		};
-
-		partition@200000 {
-			/* 4MB for Linux Kernel Image */
-			reg = <0x00200000 0x00400000>;
-			label = "NAND Linux Kernel Image";
-		};
-
-		partition@600000 {
-			/* 4MB for Compressed Root file System Image */
-			reg = <0x00600000 0x00400000>;
-			label = "NAND Compressed RFS Image";
-		};
-
-		partition@a00000 {
-			/* 15MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00f00000>;
-			label = "NAND JFFS2 Root File System";
-		};
-
-		partition@1900000 {
-			/* 7MB for User Writable Area */
-			reg = <0x01900000 0x00700000>;
-			label = "NAND Writable User area";
-		};
-	};
-};
-
-&soc {
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,m25p80";
-			reg = <0>;
-			spi-max-frequency = <40000000>;
-
-			partition@0 {
-				/* 512KB for u-boot Bootloader Image */
-				reg = <0x0 0x00080000>;
-				label = "SPI U-Boot Image";
-				read-only;
-			};
-
-			partition@80000 {
-				/* 512KB for DTB Image */
-				reg = <0x00080000 0x00080000>;
-				label = "SPI DTB Image";
-			};
-
-			partition@100000 {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00100000 0x00400000>;
-				label = "SPI Linux Kernel Image";
-			};
-
-			partition@500000 {
-				/* 4MB for Compressed RFS Image */
-				reg = <0x00500000 0x00400000>;
-				label = "SPI Compressed RFS Image";
-			};
-
-			partition@900000 {
-				/* 7MB for JFFS2 based RFS */
-				reg = <0x00900000 0x00700000>;
-				label = "SPI JFFS2 RFS";
-			};
-		};
-	};
-
-	i2c@3000 {
-		rtc@68 {
-			compatible = "dallas,ds1339";
-			reg = <0x68>;
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	usb@23000 {
-		status = "disabled";
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <2 1 0 0>;
-			reg = <0x1>;
-		};
-		phy2: ethernet-phy@2 {
-			interrupts = <1 1 0 0>;
-			reg = <0x2>;
-		};
-	};
-
-	mdio@25000 {
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26000 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	ethernet@b0000 {
-		phy-handle = <&phy2>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	ethernet@b1000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi0>;
-		phy-connection-type = "sgmii";
-	};
-
-	ethernet@b2000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
diff --git a/src/powerpc/p1024rdb_32b.dts b/src/powerpc/p1024rdb_32b.dts
deleted file mode 100644
index 90e803e9ba5f..000000000000
--- a/src/powerpc/p1024rdb_32b.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * P1024 RDB 32Bit Physical Address Map Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1024RDB";
-	compatible = "fsl,P1024RDB";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0x0 0xffe05000 0 0x1000>;
-		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xff800000 0x00040000>;
-	};
-
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@ffe09000 {
-		reg = <0x0 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0x0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p1024rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1024rdb_36b.dts b/src/powerpc/p1024rdb_36b.dts
deleted file mode 100644
index 3656825b65a1..000000000000
--- a/src/powerpc/p1024rdb_36b.dts
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * P1024 RDB 36Bit Physical Address Map Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1020si-pre.dtsi"
-/ {
-	model = "fsl,P1024RDB";
-	compatible = "fsl,P1024RDB";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
-		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
-			  0x1 0x0 0xf 0xff800000 0x00040000>;
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p1024rdb.dtsi"
-/include/ "fsl/p1020si-post.dtsi"
diff --git a/src/powerpc/p1025rdb.dtsi b/src/powerpc/p1025rdb.dtsi
deleted file mode 100644
index f50256482297..000000000000
--- a/src/powerpc/p1025rdb.dtsi
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x1000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 256KB for Vitesse 7385 Switch firmware */
-			reg = <0x0 0x00040000>;
-			label = "NOR Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@40000 {
-			/* 256KB for DTB Image */
-			reg = <0x00040000 0x00040000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@80000 {
-			/* 3.5 MB for Linux Kernel Image */
-			reg = <0x00080000 0x00380000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@400000 {
-			/* 11MB for JFFS2 based Root file System */
-			reg = <0x00400000 0x00b00000>;
-			label = "NOR JFFS2 Root File System";
-		};
-
-		partition@f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x00f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-
-	nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p1025-fcm-nand",
-			     "fsl,elbc-fcm-nand";
-		reg = <0x1 0x0 0x40000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND DTB Image";
-		};
-
-		partition@200000 {
-			/* 4MB for Linux Kernel Image */
-			reg = <0x00200000 0x00400000>;
-			label = "NAND Linux Kernel Image";
-		};
-
-		partition@600000 {
-			/* 4MB for Compressed Root file System Image */
-			reg = <0x00600000 0x00400000>;
-			label = "NAND Compressed RFS Image";
-		};
-
-		partition@a00000 {
-			/* 7MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00700000>;
-			label = "NAND JFFS2 Root File System";
-		};
-
-		partition@1100000 {
-			/* 15MB for JFFS2 based Root file System */
-			reg = <0x01100000 0x00f00000>;
-			label = "NAND Writable User area";
-		};
-	};
-
-};
-
-&soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "dallas,ds1339";
-			reg = <0x68>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
-			reg = <0>;
-			spi-max-frequency = <40000000>; /* input clock */
-
-			partition@u-boot {
-				/* 512KB for u-boot Bootloader Image */
-				reg = <0x0 0x00080000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			partition@dtb {
-				/* 512KB for DTB Image */
-				reg = <0x00080000 0x00080000>;
-				label = "dtb";
-			};
-
-			partition@kernel {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00100000 0x00400000>;
-				label = "kernel";
-			};
-
-			partition@fs {
-				/* 4MB for Compressed RFS Image */
-				reg = <0x00500000 0x00400000>;
-				label = "file system";
-			};
-
-			partition@jffs-fs {
-				/* 7MB for JFFS2 based RFS */
-				reg = <0x00900000 0x00700000>;
-				label = "file system jffs2";
-			};
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	/* USB2 is shared with localbus, so it must be disabled
-	   by default. We can't put 'status = "disabled";' here
-	   since U-Boot doesn't clear the status property when
-	   it enables USB2. OTOH, U-Boot does create a new node
-	   when there isn't any. So, just comment it out.
-	usb@23000 {
-		phy_type = "ulpi";
-	};
-	*/
-
-	mdio@24000 {
-		phy0: ethernet-phy@0 {
-			interrupt-parent = <&mpic>;
-			interrupts = <3 1>;
-			reg = <0x0>;
-		};
-
-		phy1: ethernet-phy@1 {
-			interrupt-parent = <&mpic>;
-			interrupts = <2 1>;
-			reg = <0x1>;
-		};
-
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@25000 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26000 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		fixed-link = <1 1 1000 0 0>;
-		phy-connection-type = "rgmii-id";
-
-	};
-
-	enet1: ethernet@b1000 {
-		phy-handle = <&phy0>;
-		tbi-handle = <&tbi1>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	par_io@e0100 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xe0100 0x60>;
-		ranges = <0x0 0xe0100 0x60>;
-		device_type = "par_io";
-		num-ports = <3>;
-		pio1: ucc_pin@01 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
-				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
-				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
-				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
-				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
-				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
-				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
-				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
-				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
-				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
-				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
-				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
-				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
-				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
-				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
-				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
-				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
-				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
-		};
-
-		pio2: ucc_pin@02 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
-				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
-				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
-				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
-				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
-				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
-				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
-				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
-				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
-				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
-		};
-
-		pio3: ucc_pin@03 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
-				0x0  0x12 0x2  0x0  0x2  0x0    /* SER7_CTS_B*/
-				0x0  0x13 0x1  0x0  0x2  0x0    /* SER7_RTS_B*/
-				0x0  0x14 0x2  0x0  0x2  0x0    /* SER7_RXD0*/
-				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
-		};
-
-		pio4: ucc_pin@04 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
-				0x0  0x1c 0x2  0x0  0x2  0x0    /* SER3_CTS_B*/
-				0x0  0x1d 0x1  0x0  0x2  0x0    /* SER3_RTS_B*/
-				0x0  0x1e 0x2  0x0  0x2  0x0    /* SER3_RXD0*/
-				0x0  0x1f 0x1  0x0  0x2  0x0>;    /* SER3_TXD0*/
-		};
-	};
-};
-
-&qe {
-	serial2: ucc@2600 {
-		device_type = "serial";
-		compatible = "ucc_uart";
-		port-number = <0>;
-		rx-clock-name = "brg6";
-		tx-clock-name = "brg6";
-		pio-handle = <&pio3>;
-	};
-
-	serial3: ucc@2200 {
-		device_type = "serial";
-		compatible = "ucc_uart";
-		port-number = <1>;
-		rx-clock-name = "brg2";
-		tx-clock-name = "brg2";
-		pio-handle = <&pio4>;
-	};
-};
diff --git a/src/powerpc/p1025rdb_32b.dts b/src/powerpc/p1025rdb_32b.dts
deleted file mode 100644
index a2ed6280ba7a..000000000000
--- a/src/powerpc/p1025rdb_32b.dts
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * P1025 RDB Device Tree Source (32-bit address map)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1021si-pre.dtsi"
-/ {
-	model = "fsl,P1025RDB";
-	compatible = "fsl,P1025RDB";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
-
-		/* NOR, NAND Flashes */
-		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xff800000 0x00040000>;
-	};
-
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		reg = <0 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	qe: qe@ffe80000 {
-		ranges = <0x0 0x0 0xffe80000 0x40000>;
-		reg = <0 0xffe80000 0 0x480>;
-		brg-frequency = <0>;
-		bus-frequency = <0>;
-		status = "disabled"; /* no firmware loaded */
-
-		enet3: ucc@2000 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			rx-clock-name = "clk12";
-			tx-clock-name = "clk9";
-			pio-handle = <&pio1>;
-			phy-handle = <&qe_phy0>;
-			phy-connection-type = "mii";
-		};
-
-		mdio@2120 {
-			qe_phy0: ethernet-phy@0 {
-				interrupt-parent = <&mpic>;
-				interrupts = <4 1 0 0>;
-				reg = <0x6>;
-			};
-			qe_phy1: ethernet-phy@03 {
-				interrupt-parent = <&mpic>;
-				interrupts = <5 1 0 0>;
-				reg = <0x3>;
-			};
-			tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet4: ucc@2400 {
-			device_type = "network";
-			compatible = "ucc_geth";
-			rx-clock-name = "none";
-			tx-clock-name = "clk13";
-			pio-handle = <&pio2>;
-			phy-handle = <&qe_phy1>;
-			phy-connection-type = "rmii";
-		};
-	};
-};
-
-/include/ "p1025rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
diff --git a/src/powerpc/p1025rdb_36b.dts b/src/powerpc/p1025rdb_36b.dts
deleted file mode 100644
index 06deb6f341ba..000000000000
--- a/src/powerpc/p1025rdb_36b.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * P1025 RDB Device Tree Source (36-bit address map)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1021si-pre.dtsi"
-/ {
-	model = "fsl,P1025RDB";
-	compatible = "fsl,P1025RDB";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
-
-		/* NOR, NAND Flashes */
-		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
-			  0x1 0x0 0xf 0xff800000 0x00040000>;
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	qe: qe@fffe80000 {
-		status = "disabled"; /* no firmware loaded */
-	};
-
-};
-
-/include/ "p1025rdb.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
diff --git a/src/powerpc/p1025twr.dts b/src/powerpc/p1025twr.dts
deleted file mode 100644
index 9036a4987905..000000000000
--- a/src/powerpc/p1025twr.dts
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * P1025 TWR Device Tree Source (32-bit address map)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1021si-pre.dtsi"
-/ {
-	model = "fsl,P1025";
-	compatible = "fsl,TWR-P1025";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
-
-		/* NOR Flash and SSD1289 */
-		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
-			  0x2 0x0 0x0 0xe0000000 0x00020000>;
-	};
-
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		reg = <0 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	qe: qe@ffe80000 {
-		ranges = <0x0 0x0 0xffe80000 0x40000>;
-		reg = <0 0xffe80000 0 0x480>;
-		brg-frequency = <0>;
-		bus-frequency = <0>;
-	};
-};
-
-/include/ "p1025twr.dtsi"
-/include/ "fsl/p1021si-post.dtsi"
diff --git a/src/powerpc/p1025twr.dtsi b/src/powerpc/p1025twr.dtsi
deleted file mode 100644
index 8453501c256e..000000000000
--- a/src/powerpc/p1025twr.dtsi
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * P1025 TWR Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/{
-       aliases {
-		ethernet3 = &enet3;
-		ethernet4 = &enet4;
-       };
-};
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x4000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 256KB for Vitesse 7385 Switch firmware */
-			reg = <0x0 0x00040000>;
-			label = "NOR Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@40000 {
-			/* 256KB for DTB Image */
-			reg = <0x00040000 0x00040000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@80000 {
-			/* 5.5 MB for Linux Kernel Image */
-			reg = <0x00080000 0x00580000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@400000 {
-			/* 56.75MB for Root file System */
-			reg = <0x00600000 0x038c0000>;
-			label = "NOR Root File System";
-		};
-
-		partition@ec0000 {
-			/* This location must not be altered  */
-			/* 256KB for QE ucode firmware*/
-			reg = <0x03ec0000 0x00040000>;
-			label = "NOR QE microcode firmware";
-			read-only;
-		};
-
-		partition@f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x03f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-
-	/* CS2 for Display */
-	display@2,0 {
-		compatible = "solomon,ssd1289fb";
-		reg = <0x2 0x0000 0x0004>;
-	};
-
-};
-
-&soc {
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	mdio@24000 {
-		phy0: ethernet-phy@2 {
-			interrupt-parent = <&mpic>;
-			interrupts = <1 1 0 0>;
-			reg = <0x2>;
-		};
-
-		phy1: ethernet-phy@1 {
-			interrupt-parent = <&mpic>;
-			interrupts = <2 1 0 0>;
-			reg = <0x1>;
-		};
-
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@25000 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26000 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@b0000 {
-		phy-handle = <&phy0>;
-		phy-connection-type = "rgmii-id";
-
-	};
-
-	enet1: ethernet@b1000 {
-		status = "disabled";
-	};
-
-	enet2: ethernet@b2000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	par_io@e0100 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0xe0100 0x60>;
-		ranges = <0x0 0xe0100 0x60>;
-		device_type = "par_io";
-		num-ports = <3>;
-		pio1: ucc_pin@01 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
-				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
-				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
-				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
-				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
-				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
-				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
-				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
-				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
-				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
-				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
-				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
-				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
-				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
-				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
-				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
-				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
-				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
-		};
-
-		pio2: ucc_pin@02 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
-				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
-				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
-				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
-				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
-				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
-				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
-				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
-				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
-				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
-		};
-
-		pio3: ucc_pin@03 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
-				0x0  0x12 0x2  0x0  0x2  0x0    /* SER7_CTS_B*/
-				0x0  0x13 0x1  0x0  0x2  0x0    /* SER7_RTS_B*/
-				0x0  0x14 0x2  0x0  0x2  0x0    /* SER7_RXD0*/
-				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
-		};
-
-		pio4: ucc_pin@04 {
-			pio-map = <
-		/* port  pin  dir  open_drain  assignment  has_irq */
-				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
-				0x0  0x1c 0x2  0x0  0x2  0x0    /* SER3_CTS_B*/
-				0x0  0x1d 0x1  0x0  0x2  0x0    /* SER3_RTS_B*/
-				0x0  0x1e 0x2  0x0  0x2  0x0    /* SER3_RXD0*/
-				0x0  0x1f 0x1  0x0  0x2  0x0>;    /* SER3_TXD0*/
-		};
-	};
-};
-
-&qe {
-	enet3: ucc@2000 {
-		device_type = "network";
-		compatible = "ucc_geth";
-		rx-clock-name = "clk12";
-		tx-clock-name = "clk9";
-		pio-handle = <&pio1>;
-		phy-handle = <&qe_phy0>;
-		phy-connection-type = "mii";
-	};
-
-	mdio@2120 {
-		qe_phy0: ethernet-phy@18 {
-			interrupt-parent = <&mpic>;
-			interrupts = <4 1 0 0>;
-			reg = <0x18>;
-			device_type = "ethernet-phy";
-		};
-		qe_phy1: ethernet-phy@19 {
-			interrupt-parent = <&mpic>;
-			interrupts = <5 1 0 0>;
-			reg = <0x19>;
-			device_type = "ethernet-phy";
-		};
-		tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet4: ucc@2400 {
-		device_type = "network";
-		compatible = "ucc_geth";
-		rx-clock-name = "none";
-		tx-clock-name = "clk13";
-		pio-handle = <&pio2>;
-		phy-handle = <&qe_phy1>;
-		phy-connection-type = "rmii";
-	};
-
-	serial2: ucc@2600 {
-		device_type = "serial";
-		compatible = "ucc_uart";
-		port-number = <0>;
-		rx-clock-name = "brg6";
-		tx-clock-name = "brg6";
-		pio-handle = <&pio3>;
-	};
-
-	serial3: ucc@2200 {
-		device_type = "serial";
-		compatible = "ucc_uart";
-		port-number = <1>;
-		rx-clock-name = "brg2";
-		tx-clock-name = "brg2";
-		pio-handle = <&pio4>;
-	};
-};
diff --git a/src/powerpc/p2020ds.dts b/src/powerpc/p2020ds.dts
deleted file mode 100644
index 237310cc7e6c..000000000000
--- a/src/powerpc/p2020ds.dts
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * P2020 DS Device Tree Source
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p2020si-pre.dtsi"
-
-/ {
-	model = "fsl,P2020DS";
-	compatible = "fsl,P2020DS";
-
-	memory {
-		device_type = "memory";
-	};
-
-	board_lbc: lbc: localbus@ffe05000 {
-		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
-			  0x1 0x0 0x0 0xe0000000 0x08000000
-			  0x2 0x0 0x0 0xffa00000 0x00040000
-			  0x3 0x0 0x0 0xffdf0000 0x00008000
-			  0x4 0x0 0x0 0xffa40000 0x00040000
-			  0x5 0x0 0x0 0xffa80000 0x00040000
-			  0x6 0x0 0x0 0xffac0000 0x00040000>;
-		reg = <0 0xffe05000 0 0x1000>;
-	};
-
-	board_soc: soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci2: pcie@ffe08000 {
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		reg = <0 0xffe08000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-
-	board_pci1: pci1: pcie@ffe09000 {
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		reg = <0 0xffe09000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-
-	pci0: pcie@ffe0a000 {
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		reg = <0 0xffe0a000 0 0x1000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-		};
-	};
-};
-
-/*
- * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
- * for interrupt-map & interrupt-map-mask
- */
-
-/include/ "fsl/p2020si-post.dtsi"
-/include/ "p2020ds.dtsi"
diff --git a/src/powerpc/p2020ds.dtsi b/src/powerpc/p2020ds.dtsi
deleted file mode 100644
index e699cf95b063..000000000000
--- a/src/powerpc/p2020ds.dtsi
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * P2020DS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		ramdisk@0 {
-			reg = <0x0 0x03000000>;
-			read-only;
-		};
-
-		diagnostic@3000000 {
-			reg = <0x03000000 0x00e00000>;
-			read-only;
-		};
-
-		dink@3e00000 {
-			reg = <0x03e00000 0x00200000>;
-			read-only;
-		};
-
-		kernel@4000000 {
-			reg = <0x04000000 0x00400000>;
-			read-only;
-		};
-
-		jffs2@4400000 {
-			reg = <0x04400000 0x03b00000>;
-		};
-
-		dtb@7f00000 {
-			reg = <0x07f00000 0x00080000>;
-			read-only;
-		};
-
-		u-boot@7f80000 {
-			reg = <0x07f80000 0x00080000>;
-			read-only;
-		};
-	};
-
-	nand@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,elbc-fcm-nand";
-		reg = <0x2 0x0 0x40000>;
-
-		u-boot@0 {
-			reg = <0x0 0x02000000>;
-			read-only;
-		};
-
-		jffs2@2000000 {
-			reg = <0x02000000 0x10000000>;
-		};
-
-		ramdisk@12000000 {
-			reg = <0x12000000 0x08000000>;
-			read-only;
-		};
-
-		kernel@1a000000 {
-			reg = <0x1a000000 0x04000000>;
-		};
-
-		dtb@1e000000 {
-			reg = <0x1e000000 0x01000000>;
-			read-only;
-		};
-
-		empty@1f000000 {
-			reg = <0x1f000000 0x21000000>;
-		};
-	};
-
-	board-control@3,0 {
-		compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
-		reg = <0x3 0x0 0x30>;
-	};
-
-	nand@4,0 {
-		compatible = "fsl,elbc-fcm-nand";
-		reg = <0x4 0x0 0x40000>;
-	};
-
-	nand@5,0 {
-		compatible = "fsl,elbc-fcm-nand";
-		reg = <0x5 0x0 0x40000>;
-	};
-
-	nand@6,0 {
-		compatible = "fsl,elbc-fcm-nand";
-		reg = <0x6 0x0 0x40000>;
-	};
-};
-
-&board_soc {
-	usb@22000 {
-		phy_type = "ulpi";
-		dr_mode = "host";
-	};
-
-	mdio@24520 {
-		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <3 1 0 0>;
-			reg = <0x1>;
-		};
-		phy2: ethernet-phy@2 {
-			interrupts = <3 1 0 0>;
-			reg = <0x2>;
-		};
-
-		sgmii_phy1: sgmii-phy@1 {
-			interrupts = <5 1 0 0>;
-			reg = <0x1c>;
-		};
-		sgmii_phy2: sgmii-phy@2 {
-			interrupts = <5 1 0 0>;
-			reg = <0x1d>;
-		};
-
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-
-	};
-
-	mdio@25520 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26520 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-
-	};
-
-	ptp_clock@24e00 {
-		fsl,tclk-period = <5>;
-		fsl,tmr-prsc = <200>;
-		fsl,tmr-add = <0xCCCCCCCD>;
-		fsl,tmr-fiper1 = <0x3B9AC9FB>;
-		fsl,tmr-fiper2 = <0x0001869B>;
-		fsl,max-adj = <249999999>;
-	};
-
-	enet0: ethernet@24000 {
-		tbi-handle = <&tbi0>;
-		phy-handle = <&phy0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	enet1: ethernet@25000 {
-		tbi-handle = <&tbi1>;
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-
-	};
-
-	enet2: ethernet@26000 {
-		tbi-handle = <&tbi2>;
-		phy-handle = <&phy2>;
-		phy-connection-type = "rgmii-id";
-	};
-};
-
-&board_pci1 {
-	pcie@0 {
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			// IDSEL 0x11 func 0 - PCI slot 1
-			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 1 - PCI slot 1
-			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 2 - PCI slot 1
-			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 3 - PCI slot 1
-			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 4 - PCI slot 1
-			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 5 - PCI slot 1
-			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 6 - PCI slot 1
-			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 7 - PCI slot 1
-			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
-			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
-			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-			>;
-
-		uli1575@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-			isa@1e {
-				device_type = "isa";
-				#interrupt-cells = <2>;
-				#size-cells = <1>;
-				#address-cells = <2>;
-				reg = <0xf000 0x0 0x0 0x0 0x0>;
-				ranges = <0x1 0x0 0x1000000 0x0 0x0
-					  0x1000>;
-				interrupt-parent = <&i8259>;
-
-				i8259: interrupt-controller@20 {
-					reg = <0x1 0x20 0x2
-					       0x1 0xa0 0x2
-					       0x1 0x4d0 0x2>;
-					interrupt-controller;
-					device_type = "interrupt-controller";
-					#address-cells = <0>;
-					#interrupt-cells = <2>;
-					compatible = "chrp,iic";
-					interrupts = <4 1 0 0>;
-					interrupt-parent = <&mpic>;
-				};
-
-				i8042@60 {
-					#size-cells = <0>;
-					#address-cells = <1>;
-					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
-					interrupts = <1 3 12 3>;
-					interrupt-parent =
-						<&i8259>;
-
-					keyboard@0 {
-						reg = <0x0>;
-						compatible = "pnpPNP,303";
-					};
-
-					mouse@1 {
-						reg = <0x1>;
-						compatible = "pnpPNP,f03";
-					};
-				};
-
-				rtc@70 {
-					compatible = "pnpPNP,b00";
-					reg = <0x1 0x70 0x2>;
-				};
-
-				gpio@400 {
-					reg = <0x1 0x400 0x80>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/powerpc/p2020rdb-pc.dtsi b/src/powerpc/p2020rdb-pc.dtsi
deleted file mode 100644
index c21d1c7d16cd..000000000000
--- a/src/powerpc/p2020rdb-pc.dtsi
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x1000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 256KB for Vitesse 7385 Switch firmware */
-			reg = <0x0 0x00040000>;
-			label = "NOR Vitesse-7385 Firmware";
-			read-only;
-		};
-
-		partition@40000 {
-			/* 256KB for DTB Image */
-			reg = <0x00040000 0x00040000>;
-			label = "NOR DTB Image";
-		};
-
-		partition@80000 {
-			/* 3.5 MB for Linux Kernel Image */
-			reg = <0x00080000 0x00380000>;
-			label = "NOR Linux Kernel Image";
-		};
-
-		partition@400000 {
-			/* 11MB for JFFS2 based Root file System */
-			reg = <0x00400000 0x00b00000>;
-			label = "NOR JFFS2 Root File System";
-		};
-
-		partition@f00000 {
-			/* This location must not be altered  */
-			/* 512KB for u-boot Bootloader Image */
-			/* 512KB for u-boot Environment Variables */
-			reg = <0x00f00000 0x00100000>;
-			label = "NOR U-Boot Image";
-			read-only;
-		};
-	};
-
-	nand@1,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,p2020-fcm-nand",
-				 "fsl,elbc-fcm-nand";
-		reg = <0x1 0x0 0x40000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND DTB Image";
-		};
-
-		partition@200000 {
-			/* 4MB for Linux Kernel Image */
-			reg = <0x00200000 0x00400000>;
-			label = "NAND Linux Kernel Image";
-		};
-
-		partition@600000 {
-			/* 4MB for Compressed Root file System Image */
-			reg = <0x00600000 0x00400000>;
-			label = "NAND Compressed RFS Image";
-		};
-
-		partition@a00000 {
-			/* 7MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00700000>;
-			label = "NAND JFFS2 Root File System";
-		};
-
-		partition@1100000 {
-			/* 15MB for JFFS2 based Root file System */
-			reg = <0x01100000 0x00f00000>;
-			label = "NAND Writable User area";
-		};
-	};
-
-	L2switch@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "vitesse-7385";
-		reg = <0x2 0x0 0x20000>;
-	};
-
-	cpld@3,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cpld";
-		reg = <0x3 0x0 0x20000>;
-		read-only;
-	};
-};
-
-&soc {
-	i2c@3000 {
-		rtc@68 {
-			compatible = "pericom,pt7c4338";
-			reg = <0x68>;
-		};
-	};
-
-	spi@7000 {
-		flash@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "spansion,m25p80";
-			reg = <0>;
-			spi-max-frequency = <40000000>;
-
-			partition@0 {
-				/* 512KB for u-boot Bootloader Image */
-				reg = <0x0 0x00080000>;
-				label = "SPI U-Boot Image";
-				read-only;
-			};
-
-			partition@80000 {
-				/* 512KB for DTB Image */
-				reg = <0x00080000 0x00080000>;
-				label = "SPI DTB Image";
-			};
-
-			partition@100000 {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00100000 0x00400000>;
-				label = "SPI Linux Kernel Image";
-			};
-
-			partition@500000 {
-				/* 4MB for Compressed RFS Image */
-				reg = <0x00500000 0x00400000>;
-				label = "SPI Compressed RFS Image";
-			};
-
-			partition@900000 {
-				/* 7MB for JFFS2 based RFS */
-				reg = <0x00900000 0x00700000>;
-				label = "SPI JFFS2 RFS";
-			};
-		};
-	};
-
-	usb@22000 {
-		phy_type = "ulpi";
-	};
-
-	mdio@24520 {
-		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
-			reg = <0x0>;
-			};
-		phy1: ethernet-phy@1 {
-			interrupts = <2 1 0 0>;
-			reg = <0x1>;
-			};
-	};
-
-	mdio@25520 {
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26520 {
-		status = "disabled";
-	};
-
-	ptp_clock@24e00 {
-		fsl,tclk-period = <5>;
-		fsl,tmr-prsc = <200>;
-		fsl,tmr-add = <0xCCCCCCCD>;
-		fsl,tmr-fiper1 = <0x3B9AC9FB>;
-		fsl,tmr-fiper2 = <0x0001869B>;
-		fsl,max-adj = <249999999>;
-	};
-
-	enet0: ethernet@24000 {
-		fixed-link = <1 1 1000 0 0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	enet1: ethernet@25000 {
-		tbi-handle = <&tbi0>;
-		phy-handle = <&phy0>;
-		phy-connection-type = "sgmii";
-	};
-
-	enet2: ethernet@26000 {
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-	};
-};
diff --git a/src/powerpc/p2020rdb-pc_32b.dts b/src/powerpc/p2020rdb-pc_32b.dts
deleted file mode 100644
index 57573bd52caa..000000000000
--- a/src/powerpc/p2020rdb-pc_32b.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p2020si-pre.dtsi"
-
-/ {
-	model = "fsl,P2020RDB";
-	compatible = "fsl,P2020RDB-PC";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
-
-		/* NOR and NAND Flashes */
-		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xff800000 0x00040000
-			  0x2 0x0 0x0 0xffb00000 0x00020000
-			  0x3 0x0 0x0 0xffa00000 0x00020000>;
-	};
-
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci2: pcie@ffe08000 {
-		reg = <0 0xffe08000 0 0x1000>;
-		status = "disabled";
-	};
-
-	pci1: pcie@ffe09000 {
-		reg = <0 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci0: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p2020rdb-pc.dtsi"
-/include/ "fsl/p2020si-post.dtsi"
diff --git a/src/powerpc/p2020rdb-pc_36b.dts b/src/powerpc/p2020rdb-pc_36b.dts
deleted file mode 100644
index 470247ea68b4..000000000000
--- a/src/powerpc/p2020rdb-pc_36b.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p2020si-pre.dtsi"
-
-/ {
-	model = "fsl,P2020RDB";
-	compatible = "fsl,P2020RDB-PC";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
-
-		/* NOR and NAND Flashes */
-		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
-			  0x1 0x0 0xf 0xff800000 0x00040000
-			  0x2 0x0 0xf 0xffb00000 0x00020000
-			  0x3 0x0 0xf 0xffa00000 0x00020000>;
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci2: pcie@fffe08000 {
-		reg = <0xf 0xffe08000 0 0x1000>;
-		status = "disabled";
-	};
-
-	pci1: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci0: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "p2020rdb-pc.dtsi"
-/include/ "fsl/p2020si-post.dtsi"
diff --git a/src/powerpc/p2020rdb.dts b/src/powerpc/p2020rdb.dts
deleted file mode 100644
index 4d52bce1d5b0..000000000000
--- a/src/powerpc/p2020rdb.dts
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * P2020 RDB Device Tree Source
- *
- * Copyright 2009-2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/p2020si-pre.dtsi"
-
-/ {
-	model = "fsl,P2020RDB";
-	compatible = "fsl,P2020RDB";
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
-
-		/* NOR and NAND Flashes */
-		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xffa00000 0x00040000
-			  0x2 0x0 0x0 0xffb00000 0x00020000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x1000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 256KB for Vitesse 7385 Switch firmware */
-				reg = <0x0 0x00040000>;
-				label = "NOR (RO) Vitesse-7385 Firmware";
-				read-only;
-			};
-
-			partition@40000 {
-				/* 256KB for DTB Image */
-				reg = <0x00040000 0x00040000>;
-				label = "NOR (RO) DTB Image";
-				read-only;
-			};
-
-			partition@80000 {
-				/* 3.5 MB for Linux Kernel Image */
-				reg = <0x00080000 0x00380000>;
-				label = "NOR (RO) Linux Kernel Image";
-				read-only;
-			};
-
-			partition@400000 {
-				/* 11MB for JFFS2 based Root file System */
-				reg = <0x00400000 0x00b00000>;
-				label = "NOR (RW) JFFS2 Root File System";
-			};
-
-			partition@f00000 {
-				/* This location must not be altered  */
-				/* 512KB for u-boot Bootloader Image */
-				/* 512KB for u-boot Environment Variables */
-				reg = <0x00f00000 0x00100000>;
-				label = "NOR (RO) U-Boot Image";
-				read-only;
-			};
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p2020-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x40000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND (RO) U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 1MB for DTB Image */
-				reg = <0x00100000 0x00100000>;
-				label = "NAND (RO) DTB Image";
-				read-only;
-			};
-
-			partition@200000 {
-				/* 4MB for Linux Kernel Image */
-				reg = <0x00200000 0x00400000>;
-				label = "NAND (RO) Linux Kernel Image";
-				read-only;
-			};
-
-			partition@600000 {
-				/* 4MB for Compressed Root file System Image */
-				reg = <0x00600000 0x00400000>;
-				label = "NAND (RO) Compressed RFS Image";
-				read-only;
-			};
-
-			partition@a00000 {
-				/* 7MB for JFFS2 based Root file System */
-				reg = <0x00a00000 0x00700000>;
-				label = "NAND (RW) JFFS2 Root File System";
-			};
-
-			partition@1100000 {
-				/* 15MB for JFFS2 based Root file System */
-				reg = <0x01100000 0x00f00000>;
-				label = "NAND (RW) Writable User area";
-			};
-		};
-
-		L2switch@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "vitesse-7385";
-			reg = <0x2 0x0 0x20000>;
-		};
-
-	};
-
-	soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-			};
-		};
-
-		spi@7000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>;
-
-				partition@0 {
-					/* 512KB for u-boot Bootloader Image */
-					reg = <0x0 0x00080000>;
-					label = "SPI (RO) U-Boot Image";
-					read-only;
-				};
-
-				partition@80000 {
-					/* 512KB for DTB Image */
-					reg = <0x00080000 0x00080000>;
-					label = "SPI (RO) DTB Image";
-					read-only;
-				};
-
-				partition@100000 {
-					/* 4MB for Linux Kernel Image */
-					reg = <0x00100000 0x00400000>;
-					label = "SPI (RO) Linux Kernel Image";
-					read-only;
-				};
-
-				partition@500000 {
-					/* 4MB for Compressed RFS Image */
-					reg = <0x00500000 0x00400000>;
-					label = "SPI (RO) Compressed RFS Image";
-					read-only;
-				};
-
-				partition@900000 {
-					/* 7MB for JFFS2 based RFS */
-					reg = <0x00900000 0x00700000>;
-					label = "SPI (RW) JFFS2 RFS";
-				};
-			};
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-			dr_mode = "host";
-		};
-
-		mdio@24520 {
-			phy0: ethernet-phy@0 {
-				interrupts = <3 1 0 0>;
-				reg = <0x0>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupts = <3 1 0 0>;
-				reg = <0x1>;
-			};
-			tbi-phy@2 {
-				device_type = "tbi-phy";
-				reg = <0x2>;
-			};
-		};
-
-		mdio@25520 {
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		mdio@26520 {
-			status = "disabled";
-		};
-
-		ptp_clock@24e00 {
-			fsl,tclk-period = <5>;
-			fsl,tmr-prsc = <200>;
-			fsl,tmr-add = <0xCCCCCCCD>;
-			fsl,tmr-fiper1 = <0x3B9AC9FB>;
-			fsl,tmr-fiper2 = <0x0001869B>;
-			fsl,max-adj = <249999999>;
-		};
-
-		enet0: ethernet@24000 {
-			fixed-link = <1 1 1000 0 0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		enet1: ethernet@25000 {
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "sgmii";
-		};
-
-		enet2: ethernet@26000 {
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-	};
-
-	pci0: pcie@ffe08000 {
-		reg = <0 0xffe08000 0 0x1000>;
-		status = "disabled";
-	};
-
-	pci1: pcie@ffe09000 {
-		reg = <0 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p2020si-post.dtsi"
diff --git a/src/powerpc/p2041rdb.dts b/src/powerpc/p2041rdb.dts
deleted file mode 100644
index d97ad74c7279..000000000000
--- a/src/powerpc/p2041rdb.dts
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * P2041RDB Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p2041si-pre.dtsi"
-
-/ {
-	model = "fsl,P2041RDB";
-	compatible = "fsl,P2041RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@u-boot {
-					label = "u-boot";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@kernel {
-					label = "kernel";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@dtb {
-					label = "dtb";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@fs {
-					label = "file system";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-		};
-
-		i2c@118000 {
-			lm75b@48 {
-				compatible = "nxp,lm75a";
-				reg = <0x48>;
-			};
-			eeprom@50 {
-				compatible = "at24,24c256";
-				reg = <0x50>;
-			};
-			rtc@68 {
-				compatible = "pericom,pt7c4338";
-				reg = <0x68>;
-			};
-			adt7461@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-		};
-
-		i2c@118100 {
-			eeprom@50 {
-				compatible = "at24,24c256";
-				reg = <0x50>;
-			};
-		};
-
-		usb1: usb@211000 {
-			dr_mode = "host";
-		};
-	};
-
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-		port2 {
-			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
-		};
-	};
-
-	lbc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  1 0 0xf 0xffa00000 0x00040000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x08000000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x1 0x0 0x40000>;
-
-			partition@0 {
-				label = "NAND U-Boot Image";
-				reg = <0x0 0x02000000>;
-				read-only;
-			};
-
-			partition@2000000 {
-				label = "NAND Root File System";
-				reg = <0x02000000 0x10000000>;
-			};
-
-			partition@12000000 {
-				label = "NAND Compressed RFS Image";
-				reg = <0x12000000 0x08000000>;
-			};
-
-			partition@1a000000 {
-				label = "NAND Linux Kernel Image";
-				reg = <0x1a000000 0x04000000>;
-			};
-
-			partition@1e000000 {
-				label = "NAND DTB Image";
-				reg = <0x1e000000 0x01000000>;
-			};
-
-			partition@1f000000 {
-				label = "NAND Writable User area";
-				reg = <0x1f000000 0x01000000>;
-			};
-		};
-	};
-
-	pci0: pcie@ffe200000 {
-		reg = <0xf 0xfe200000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		reg = <0xf 0xfe201000 0 0x1000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe202000 {
-		reg = <0xf 0xfe202000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-};
-
-/include/ "fsl/p2041si-post.dtsi"
diff --git a/src/powerpc/p3041ds.dts b/src/powerpc/p3041ds.dts
deleted file mode 100644
index 2fed3bc0b990..000000000000
--- a/src/powerpc/p3041ds.dts
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * P3041DS Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p3041si-pre.dtsi"
-
-/ {
-	model = "fsl,P3041DS";
-	compatible = "fsl,P3041DS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <35000000>; /* input clock */
-				partition@u-boot {
-					label = "u-boot";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@kernel {
-					label = "kernel";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@dtb {
-					label = "dtb";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@fs {
-					label = "file system";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-		};
-
-		i2c@118100 {
-			eeprom@51 {
-				compatible = "at24,24c256";
-				reg = <0x51>;
-			};
-			eeprom@52 {
-				compatible = "at24,24c256";
-				reg = <0x52>;
-			};
-		};
-
-		i2c@119100 {
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0x1 0x1 0 0>;
-			};
-			adt7461@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-		};
-	};
-
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-		port2 {
-			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
-		};
-	};
-
-	lbc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xffa00000 0x00040000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x08000000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x2 0x0 0x40000>;
-
-			partition@0 {
-				label = "NAND U-Boot Image";
-				reg = <0x0 0x02000000>;
-				read-only;
-			};
-
-			partition@2000000 {
-				label = "NAND Root File System";
-				reg = <0x02000000 0x10000000>;
-			};
-
-			partition@12000000 {
-				label = "NAND Compressed RFS Image";
-				reg = <0x12000000 0x08000000>;
-			};
-
-			partition@1a000000 {
-				label = "NAND Linux Kernel Image";
-				reg = <0x1a000000 0x04000000>;
-			};
-
-			partition@1e000000 {
-				label = "NAND DTB Image";
-				reg = <0x1e000000 0x01000000>;
-			};
-
-			partition@1f000000 {
-				label = "NAND Writable User area";
-				reg = <0x1f000000 0x21000000>;
-			};
-		};
-
-		board-control@3,0 {
-			compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
-			reg = <3 0 0x30>;
-		};
-	};
-
-	pci0: pcie@ffe200000 {
-		reg = <0xf 0xfe200000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		reg = <0xf 0xfe201000 0 0x1000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe202000 {
-		reg = <0xf 0xfe202000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci3: pcie@ffe203000 {
-		reg = <0xf 0xfe203000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-};
-
-/include/ "fsl/p3041si-post.dtsi"
diff --git a/src/powerpc/p4080ds.dts b/src/powerpc/p4080ds.dts
deleted file mode 100644
index 1cf6148b8b05..000000000000
--- a/src/powerpc/p4080ds.dts
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * P4080DS Device Tree Source
- *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p4080si-pre.dtsi"
-
-/ {
-	model = "fsl,P4080DS";
-	compatible = "fsl,P4080DS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@u-boot {
-					label = "u-boot";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@kernel {
-					label = "kernel";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@dtb {
-					label = "dtb";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@fs {
-					label = "file system";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-		};
-
-		i2c@118100 {
-			eeprom@51 {
-				compatible = "at24,24c256";
-				reg = <0x51>;
-			};
-			eeprom@52 {
-				compatible = "at24,24c256";
-				reg = <0x52>;
-			};
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0x1 0x1 0 0>;
-			};
-			adt7461@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-		};
-
-		usb0: usb@210000 {
-			phy_type = "ulpi";
-		};
-
-		usb1: usb@211000 {
-			dr_mode = "host";
-			phy_type = "ulpi";
-		};
-	};
-
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-		port2 {
-			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
-		};
-	};
-
-	lbc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x08000000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-
-		board-control@3,0 {
-			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
-			reg = <3 0 0x30>;
-		};
-	};
-
-	pci0: pcie@ffe200000 {
-		reg = <0xf 0xfe200000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		reg = <0xf 0xfe201000 0 0x1000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe202000 {
-		reg = <0xf 0xfe202000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-};
-
-/include/ "fsl/p4080si-post.dtsi"
diff --git a/src/powerpc/p5020ds.dts b/src/powerpc/p5020ds.dts
deleted file mode 100644
index 2869fea717dd..000000000000
--- a/src/powerpc/p5020ds.dts
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * P5020DS Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p5020si-pre.dtsi"
-
-/ {
-	model = "fsl,P5020DS";
-	compatible = "fsl,P5020DS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@u-boot {
-					label = "u-boot";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@kernel {
-					label = "kernel";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@dtb {
-					label = "dtb";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@fs {
-					label = "file system";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-		};
-
-		i2c@118100 {
-			eeprom@51 {
-				compatible = "at24,24c256";
-				reg = <0x51>;
-			};
-			eeprom@52 {
-				compatible = "at24,24c256";
-				reg = <0x52>;
-			};
-		};
-
-		i2c@119100 {
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0x1 0x1 0 0>;
-			};
-			adt7461@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-		};
-	};
-
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-		port2 {
-			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
-		};
-	};
-
-	lbc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xffa00000 0x00040000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x08000000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x2 0x0 0x40000>;
-
-			partition@0 {
-				label = "NAND U-Boot Image";
-				reg = <0x0 0x02000000>;
-				read-only;
-			};
-
-			partition@2000000 {
-				label = "NAND Root File System";
-				reg = <0x02000000 0x10000000>;
-			};
-
-			partition@12000000 {
-				label = "NAND Compressed RFS Image";
-				reg = <0x12000000 0x08000000>;
-			};
-
-			partition@1a000000 {
-				label = "NAND Linux Kernel Image";
-				reg = <0x1a000000 0x04000000>;
-			};
-
-			partition@1e000000 {
-				label = "NAND DTB Image";
-				reg = <0x1e000000 0x01000000>;
-			};
-
-			partition@1f000000 {
-				label = "NAND Writable User area";
-				reg = <0x1f000000 0x21000000>;
-			};
-		};
-
-		board-control@3,0 {
-			compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
-			reg = <3 0 0x30>;
-		};
-	};
-
-	pci0: pcie@ffe200000 {
-		reg = <0xf 0xfe200000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		reg = <0xf 0xfe201000 0 0x1000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe202000 {
-		reg = <0xf 0xfe202000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci3: pcie@ffe203000 {
-		reg = <0xf 0xfe203000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-};
-
-/include/ "fsl/p5020si-post.dtsi"
diff --git a/src/powerpc/p5040ds.dts b/src/powerpc/p5040ds.dts
deleted file mode 100644
index 860b5ccf76c0..000000000000
--- a/src/powerpc/p5040ds.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * P5040DS Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * This software is provided by Freescale Semiconductor "as is" and any
- * express or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose are
- * disclaimed. In no event shall Freescale Semiconductor be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential damages
- * (including, but not limited to, procurement of substitute goods or services;
- * loss of use, data, or profits; or business interruption) however caused and
- * on any theory of liability, whether in contract, strict liability, or tort
- * (including negligence or otherwise) arising in any way out of the use of this
- * software, even if advised of the possibility of such damage.
- */
-
-/include/ "fsl/p5040si-pre.dtsi"
-
-/ {
-	model = "fsl,P5040DS";
-	compatible = "fsl,P5040DS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@u-boot {
-					label = "u-boot";
-					reg = <0x00000000 0x00100000>;
-				};
-				partition@kernel {
-					label = "kernel";
-					reg = <0x00100000 0x00500000>;
-				};
-				partition@dtb {
-					label = "dtb";
-					reg = <0x00600000 0x00100000>;
-				};
-				partition@fs {
-					label = "file system";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-		};
-
-		i2c@118100 {
-			eeprom@51 {
-				compatible = "at24,24c256";
-				reg = <0x51>;
-			};
-			eeprom@52 {
-				compatible = "at24,24c256";
-				reg = <0x52>;
-			};
-		};
-
-		i2c@119100 {
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0x1 0x1 0 0>;
-			};
-			adt7461@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-		};
-	};
-
-	lbc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x1000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xffa00000 0x00040000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x08000000>;
-			bank-width = <2>;
-			device-width = <2>;
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x2 0x0 0x40000>;
-
-			partition@0 {
-				label = "NAND U-Boot Image";
-				reg = <0x0 0x02000000>;
-			};
-
-			partition@2000000 {
-				label = "NAND Root File System";
-				reg = <0x02000000 0x10000000>;
-			};
-
-			partition@12000000 {
-				label = "NAND Compressed RFS Image";
-				reg = <0x12000000 0x08000000>;
-			};
-
-			partition@1a000000 {
-				label = "NAND Linux Kernel Image";
-				reg = <0x1a000000 0x04000000>;
-			};
-
-			partition@1e000000 {
-				label = "NAND DTB Image";
-				reg = <0x1e000000 0x01000000>;
-			};
-
-			partition@1f000000 {
-				label = "NAND Writable User area";
-				reg = <0x1f000000 0x01000000>;
-			};
-		};
-
-		board-control@3,0 {
-			compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis";
-			reg = <3 0 0x40>;
-		};
-	};
-
-	pci0: pcie@ffe200000 {
-		reg = <0xf 0xfe200000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe201000 {
-		reg = <0xf 0xfe201000 0 0x1000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe202000 {
-		reg = <0xf 0xfe202000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-};
-
-/include/ "fsl/p5040si-post.dtsi"
diff --git a/src/powerpc/pcm030.dts b/src/powerpc/pcm030.dts
deleted file mode 100644
index 192e66af0001..000000000000
--- a/src/powerpc/pcm030.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
- *
- * Copyright 2006 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- * Copyright 2007 Pengutronix
- * Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 { fsl,has-wdt; };
-&gpt2 { gpio-controller; };
-&gpt3 { gpio-controller; };
-&gpt4 { gpio-controller; };
-&gpt5 { gpio-controller; };
-&gpt6 { gpio-controller; };
-&gpt7 { gpio-controller; };
-
-/ {
-	model = "phytec,pcm030";
-	compatible = "phytec,pcm030";
-
-	soc5200@f0000000 {
-		audioplatform: psc@2000 { /* PSC1 in ac97 mode */
-			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
-			cell-index = <0>;
-		};
-
-		/* PSC2 port is used by CAN1/2 */
-		psc@2200 {
-			status = "disabled";
-		};
-
-		psc@2400 { /* PSC3 in UART mode */
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		/* PSC4 is ??? */
-		psc@2600 {
-			status = "disabled";
-		};
-
-		/* PSC5 is ??? */
-		psc@2800 {
-			status = "disabled";
-		};
-
-		psc@2c00 { /* PSC6 in UART mode */
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		i2c@3d40 {
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-			eeprom@52 {
-				compatible = "catalyst,24c32";
-				reg = <0x52>;
-				pagesize = <32>;
-			};
-		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
-	};
-
-	pci@f0000d00 {
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
-				 0xc000 0 0 2 &mpc5200_pic 1 1 3
-				 0xc000 0 0 3 &mpc5200_pic 1 2 3
-				 0xc000 0 0 4 &mpc5200_pic 1 3 3
-
-				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
-				 0xc800 0 0 2 &mpc5200_pic 1 2 3
-				 0xc800 0 0 3 &mpc5200_pic 1 3 3
-				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
-	};
-
-	localbus {
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "phytec,pcm030-audio-fabric";
-		asoc-platform = <&audioplatform>;
-	};
-};
diff --git a/src/powerpc/pcm032.dts b/src/powerpc/pcm032.dts
deleted file mode 100644
index 96b139bf50e9..000000000000
--- a/src/powerpc/pcm032.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source
- *
- * Copyright (C) 2006-2009 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- * Juergen Beisert <j.beisert@pengutronix.de>
- * Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 { fsl,has-wdt; };
-&gpt2 { gpio-controller; };
-&gpt3 { gpio-controller; };
-&gpt4 { gpio-controller; };
-&gpt5 { gpio-controller; };
-&gpt6 { gpio-controller; };
-&gpt7 { gpio-controller; };
-
-/ {
-	model = "phytec,pcm032";
-	compatible = "phytec,pcm032";
-
-	memory {
-		reg = <0x00000000 0x08000000>;	// 128MB
-	};
-
-	soc5200@f0000000 {
-		psc@2000 {	/* PSC1 is ac97 */
-			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
-			cell-index = <0>;
-		};
-
-		/* PSC2 port is used by CAN1/2 */
-		psc@2200 {
-			status = "disabled";
-		};
-
-		psc@2400 { /* PSC3 in UART mode */
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		/* PSC4 is ??? */
-		psc@2600 {
-			status = "disabled";
-		};
-
-		/* PSC5 is ??? */
-		psc@2800 {
-			status = "disabled";
-		};
-
-		psc@2c00 { /* PSC6 in UART mode */
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		i2c@3d40 {
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-			eeprom@52 {
-				compatible = "catalyst,24c32";
-				reg = <0x52>;
-				pagesize = <32>;
-			};
-		};
-	};
-
-	pci@f0000d00 {
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
-				 0xc000 0 0 2 &mpc5200_pic 1 1 3
-				 0xc000 0 0 3 &mpc5200_pic 1 2 3
-				 0xc000 0 0 4 &mpc5200_pic 1 3 3
-
-				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
-				 0xc800 0 0 2 &mpc5200_pic 1 2 3
-				 0xc800 0 0 3 &mpc5200_pic 1 3 3
-				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
-	};
-
-	localbus {
-		ranges = <0 0 0xfe000000 0x02000000
-			  1 0 0xfc000000 0x02000000
-			  2 0 0xfbe00000 0x00200000
-			  3 0 0xf9e00000 0x02000000
-			  4 0 0xf7e00000 0x02000000
-			  5 0 0xe6000000 0x02000000
-			  6 0 0xe8000000 0x02000000
-			  7 0 0xea000000 0x02000000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <4>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			partition@0 {
-				label = "ubootl";
-				reg = <0x00000000 0x00040000>;
-			};
-			partition@40000 {
-				label = "kernel";
-				reg = <0x00040000 0x001c0000>;
-			};
-			partition@200000 {
-				label = "jffs2";
-				reg = <0x00200000 0x01d00000>;
-			};
-			partition@1f00000 {
-				label = "uboot";
-				reg = <0x01f00000 0x00040000>;
-			};
-			partition@1f40000 {
-				label = "env";
-				reg = <0x01f40000 0x00040000>;
-			};
-			partition@1f80000 {
-				label = "oftree";
-				reg = <0x01f80000 0x00040000>;
-			};
-			partition@1fc0000 {
-				label = "space";
-				reg = <0x01fc0000 0x00040000>;
-			};
-		};
-
-		sram@2,0 {
-			compatible = "mtd-ram";
-			reg = <2 0 0x00200000>;
-			bank-width = <2>;
-		};
-
-		/*
-		 * example snippets for FPGA
-		 *
-		 * fpga@3,0 {
-		 *	 compatible = "fpga_driver";
-		 *	 reg = <3 0 0x02000000>;
-		 *	 bank-width = <4>;
-		 * };
-		 *
-		 * fpga@4,0 {
-		 *	 compatible = "fpga_driver";
-		 *	 reg = <4 0 0x02000000>;
-		 *	 bank-width = <4>;
-		 * };
-		 */
-
-		/*
-		 * example snippets for free chipselects
-		 *
-		 * device@5,0 {
-		 *	 compatible = "custom_driver";
-		 *	 reg = <5 0 0x02000000>;
-		 * };
-		 *
-		 * device@6,0 {
-		 *	 compatible = "custom_driver";
-		 *	 reg = <6 0 0x02000000>;
-		 * };
-		 *
-		 * device@7,0 {
-		 *	 compatible = "custom_driver";
-		 *	 reg = <7 0 0x02000000>;
-		 * };
-		 */
-	};
-};
diff --git a/src/powerpc/pdm360ng.dts b/src/powerpc/pdm360ng.dts
deleted file mode 100644
index 871c16d1ad5e..000000000000
--- a/src/powerpc/pdm360ng.dts
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Device Tree Source for IFM PDM360NG.
- *
- * Copyright 2009 - 2010 DENX Software Engineering.
- * Anatolij Gustschin <agust@denx.de>
- *
- * Based on MPC5121E ADS dts.
- * Copyright 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <mpc5121.dtsi>
-
-/ {
-	model = "pdm360ng";
-	compatible = "ifm,pdm360ng", "fsl,mpc5121";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&ipic>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512MB at 0
-	};
-
-	nfc@40000000 {
-		bank-width = <0x1>;
-		chips = <0x1>;
-
-		partition@0 {
-			label = "nand0";
-			reg = <0x0 0x40000000>;
-		};
-	};
-
-	localbus@80000020 {
-		ranges = <0x0 0x0 0xf0000000 0x10000000   /* Flash */
-			  0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
-
-		flash@0,0 {
-			compatible = "amd,s29gl01gp", "cfi-flash";
-			reg = <0 0x00000000 0x08000000
-			       0 0x08000000 0x08000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <4>;
-			device-width = <2>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-			partition@80000 {
-				label = "environment";
-				reg = <0x00080000 0x00080000>;
-				read-only;
-			};
-			partition@100000 {
-				label = "splash-image";
-				reg = <0x00100000 0x00080000>;
-				read-only;
-			};
-			partition@180000 {
-				label = "device-tree";
-				reg = <0x00180000 0x00040000>;
-			};
-			partition@1c0000 {
-				label = "kernel";
-				reg = <0x001c0000 0x00500000>;
-			};
-			partition@6c0000 {
-				label = "filesystem";
-				reg = <0x006c0000 0x07940000>;
-			};
-		};
-
-		mram0@2,0 {
-			compatible = "mtd-ram";
-			reg = <2 0x00000 0x10000>;
-			bank-width = <2>;
-		};
-
-		mram1@2,10000 {
-			compatible = "mtd-ram";
-			reg = <2 0x010000 0x10000>;
-			bank-width = <2>;
-		};
-	};
-
-	soc@80000000 {
-
-		i2c@1700 {
-			fsl,preserve-clocking;
-
-			eeprom@50 {
-				compatible = "at,24c01";
-				reg = <0x50>;
-			};
-
-			rtc@68 {
-				compatible = "stm,m41t00";
-				reg = <0x68>;
-			};
-		};
-
-		i2c@1720 {
-			status = "disabled";
-		};
-
-		i2c@1740 {
-			fsl,preserve-clocking;
-		};
-
-		ethernet@2800 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@2800 {
-			phy0: ethernet-phy@1f {
-				compatible = "smsc,lan8700";
-				reg = <0x1f>;
-			};
-		};
-
-		/* USB1 using external ULPI PHY */
-		usb@3000 {
-			dr_mode = "host";
-		};
-
-		/* USB0 using internal UTMI PHY */
-		usb@4000 {
-			fsl,invert-pwr-fault;
-		};
-
-		psc@11000 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-		};
-
-		psc@11100 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-		};
-
-		psc@11200 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-		};
-
-		psc@11300 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-		};
-
-		psc@11400 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-		};
-
-		psc@11500 {
-			status = "disabled";
-		};
-
-		psc@11600 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-		};
-
-		psc@11700 {
-			status = "disabled";
-		};
-
-		psc@11800 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-		};
-
-		psc@11900 {
-			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* ADS7845 touch screen controller */
-			ts@0 {
-				compatible = "ti,ads7846";
-				reg = <0x0>;
-				spi-max-frequency = <3000000>;
-				/* pen irq is GPIO25 */
-				interrupts = <78 0x8>;
-			};
-		};
-
-		psc@11a00 {
-			status = "disabled";
-		};
-
-		psc@11b00 {
-			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
-		};
-	};
-};
diff --git a/src/powerpc/ppa8548.dts b/src/powerpc/ppa8548.dts
deleted file mode 100644
index 27b0699ee923..000000000000
--- a/src/powerpc/ppa8548.dts
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * PPA8548 Device Tree Source (36-bit address map)
- * Copyright 2013 Prodrive B.V.
- *
- * Based on:
- * MPC8548 CDS Device Tree Source (36-bit address map)
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8548si-pre.dtsi"
-
-/ {
-	model = "ppa8548";
-	compatible = "ppa8548";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0x0 0x40000000>;
-	};
-
-	lbc: localbus@fe0005000 {
-		reg = <0xf 0xe0005000 0 0x1000>;
-		ranges = <0x0 0x0 0xf 0xff800000 0x00800000>;
-	};
-
-	soc: soc8548@fe0000000 {
-		ranges = <0 0xf 0xe0000000 0x100000>;
-	};
-
-	pci0: pci@fe0008000 {
-		/* ppa8548 board doesn't support PCI */
-		status = "disabled";
-	};
-
-	pci1: pci@fe0009000 {
-		/* ppa8548 board doesn't support PCI */
-		status = "disabled";
-	};
-
-	pci2: pcie@fe000a000 {
-		/* ppa8548 board doesn't support PCI */
-		status = "disabled";
-	};
-
-	rio: rapidio@fe00c0000 {
-		reg = <0xf 0xe00c0000 0x0 0x11000>;
-		port1 {
-			ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>;
-		};
-	};
-};
-
-&lbc {
-	nor@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x00800000>;
-		bank-width = <2>;
-		device-width = <2>;
-
-		partition@0 {
-			reg = <0x0 0x7A0000>;
-			label = "user";
-		};
-
-		partition@7A0000 {
-			reg = <0x7A0000 0x20000>;
-			label = "env";
-			read-only;
-		};
-
-		partition@7C0000 {
-			reg = <0x7C0000 0x40000>;
-			label = "u-boot";
-			read-only;
-		};
-	};
-};
-
-&soc {
-	i2c@3000 {
-		rtc@6f {
-			compatible = "intersil,isl1208";
-			reg = <0x6f>;
-		};
-	};
-
-	i2c@3100 {
-	};
-
-	/*
-	 * Only ethernet controller @25000 and @26000 are used.
-	 * Use alias enet2 and enet3 for the remainig controllers,
-	 * to stay compatible with mpc8548si-pre.dtsi.
-	 */
-	enet2: ethernet@24000 {
-		status = "disabled";
-	};
-
-	mdio@24520 {
-		phy0: ethernet-phy@0 {
-			interrupts = <7 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <8 1 0 0>;
-			reg = <0x1>;
-		};
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet0: ethernet@25000 {
-		tbi-handle = <&tbi1>;
-		phy-handle = <&phy0>;
-	};
-
-	mdio@25520 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet1: ethernet@26000 {
-		tbi-handle = <&tbi2>;
-		phy-handle = <&phy1>;
-	};
-
-	mdio@26520 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	enet3: ethernet@27000 {
-		status = "disabled";
-	};
-
-	mdio@27520 {
-		tbi3: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	crypto@30000 {
-		status = "disabled";
-	};
-};
-
-/include/ "fsl/mpc8548si-post.dtsi"
diff --git a/src/powerpc/pq2fads.dts b/src/powerpc/pq2fads.dts
deleted file mode 100644
index 0c525ff0c257..000000000000
--- a/src/powerpc/pq2fads.dts
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip.
- *
- * Copyright 2007,2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "pq2fads";
-	compatible = "fsl,pq2fads";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <16384>;
-			i-cache-size = <16384>;
-			timebase-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;
-	};
-
-	localbus@f0010100 {
-		compatible = "fsl,mpc8280-localbus",
-		             "fsl,pq2-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xf0010100 0x60>;
-
-		ranges = <0x0 0x0 0xff800000 0x800000
-		          0x1 0x0 0xf4500000 0x8000
-		          0x8 0x0 0xf8200000 0x8000>;
-
-		flash@0,0 {
-			compatible = "jedec-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <4>;
-			device-width = <1>;
-		};
-
-		bcsr@1,0 {
-			reg = <0x1 0x0 0x20>;
-			compatible = "fsl,pq2fads-bcsr";
-		};
-
-		PCI_PIC: pic@8,0 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			reg = <0x8 0x0 0x8>;
-			compatible = "fsl,pq2ads-pci-pic";
-			interrupt-parent = <&PIC>;
-			interrupts = <24 8>;
-		};
-	};
-
-	pci0: pci@f0010800 {
-		device_type = "pci";
-		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
-		compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		clock-frequency = <66000000>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-		                /* IDSEL 0x16 */
-		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
-		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
-		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
-		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
-
-		                /* IDSEL 0x17 */
-		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
-		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
-		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
-		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
-
-		                /* IDSEL 0x18 */
-		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
-		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
-		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
-		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
-
-		interrupt-parent = <&PIC>;
-		interrupts = <18 8>;
-		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
-	};
-
-	soc@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8280", "fsl,pq2-soc";
-		ranges = <0x0 0xf0000000 0x53000>;
-
-		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <0xf0000000 0x53000>;
-
-		cpm@119c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#interrupt-cells = <2>;
-			compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
-			reg = <0x119c0 0x30>;
-			ranges;
-
-			muram@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x0 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x2000 0x9800 0x800>;
-				};
-			};
-
-			brg@119f0 {
-				compatible = "fsl,mpc8280-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x119f0 0x10 0x115f0 0x10>;
-			};
-
-			serial0: serial@11a00 {
-				device_type = "serial";
-				compatible = "fsl,mpc8280-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x11a00 0x20 0x8000 0x100>;
-				interrupts = <40 8>;
-				interrupt-parent = <&PIC>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x800000>;
-			};
-
-			serial1: serial@11a20 {
-				device_type = "serial";
-				compatible = "fsl,mpc8280-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x11a20 0x20 0x8100 0x100>;
-				interrupts = <41 8>;
-				interrupt-parent = <&PIC>;
-				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0x4a00000>;
-			};
-
-			enet0: ethernet@11320 {
-				device_type = "network";
-				compatible = "fsl,mpc8280-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
-				interrupts = <33 8>;
-				interrupt-parent = <&PIC>;
-				phy-handle = <&PHY0>;
-				linux,network-index = <0>;
-				fsl,cpm-command = <0x16200300>;
-			};
-
-			enet1: ethernet@11340 {
-				device_type = "network";
-				compatible = "fsl,mpc8280-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>;
-				interrupts = <34 8>;
-				interrupt-parent = <&PIC>;
-				phy-handle = <&PHY1>;
-				linux,network-index = <1>;
-				fsl,cpm-command = <0x1a400300>;
-				local-mac-address = [00 e0 0c 00 79 01];
-			};
-
-			mdio@10d40 {
-				compatible = "fsl,pq2fads-mdio-bitbang",
-				             "fsl,mpc8280-mdio-bitbang",
-				             "fsl,cpm2-mdio-bitbang";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x10d40 0x14>;
-				fsl,mdio-pin = <9>;
-				fsl,mdc-pin = <10>;
-
-				PHY0: ethernet-phy@0 {
-					interrupt-parent = <&PIC>;
-					interrupts = <25 2>;
-					reg = <0x0>;
-				};
-
-				PHY1: ethernet-phy@1 {
-					interrupt-parent = <&PIC>;
-					interrupts = <25 2>;
-					reg = <0x3>;
-				};
-			};
-
-			usb@11b60 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,mpc8280-usb",
-				             "fsl,cpm2-usb";
-				reg = <0x11b60 0x18 0x8b00 0x100>;
-				interrupt-parent = <&PIC>;
-				interrupts = <11 8>;
-				fsl,cpm-command = <0x2e600000>;
-			};
-		};
-
-		PIC: interrupt-controller@10c00 {
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			reg = <0x10c00 0x80>;
-			compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic";
-		};
-
-	};
-
-	chosen {
-		linux,stdout-path = "/soc/cpm/serial@11a00";
-	};
-};
diff --git a/src/powerpc/prpmc2800.dts b/src/powerpc/prpmc2800.dts
deleted file mode 100644
index 00afaacf8c8c..000000000000
--- a/src/powerpc/prpmc2800.dts
+++ /dev/null
@@ -1,297 +0,0 @@
-/* Device Tree Source for Motorola PrPMC2800
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2007 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Property values that are labeled as "Default" will be updated by bootwrapper
- * if it can determine the exact PrPMC type.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "PrPMC280/PrPMC2800"; /* Default */
-	compatible = "motorola,PrPMC2800";
-	coherency-off;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,7447 {
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <733333333>;	/* Default */
-			bus-frequency = <133333333>;
-			timebase-frequency = <33333333>;
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x20000000>;			/* Default (512MB) */
-	};
-
-	system-controller@f1000000 { /* Marvell Discovery mv64360 */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		model = "mv64360";			/* Default */
-		compatible = "marvell,mv64360";
-		clock-frequency = <133333333>;
-		reg = <0xf1000000 0x10000>;
-		virtual-reg = <0xf1000000>;
-		ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
-			  0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
-			  0xa0000000 0xa0000000 0x4000000 /* User FLASH */
-			  0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
-			  0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
-		flash@a0000000 {
-			device_type = "rom";
-			compatible = "direct-mapped";
-			reg = <0xa0000000 0x4000000>; /* Default (64MB) */
-			probe-type = "CFI";
-			bank-width = <4>;
-			partitions = <0x00000000 0x00100000 /* RO */
-				      0x00100000 0x00040001 /* RW */
-				      0x00140000 0x00400000 /* RO */
-				      0x00540000 0x039c0000 /* RO */
-				      0x03f00000 0x00100000>; /* RO */
-			partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,mv64360-mdio";
-			PHY0: ethernet-phy@1 {
-				compatible = "broadcom,bcm5421";
-				interrupts = <76>;	/* GPP 12 */
-				interrupt-parent = <&PIC>;
-				reg = <1>;
-			};
-			PHY1: ethernet-phy@3 {
-				compatible = "broadcom,bcm5421";
-				interrupts = <76>;	/* GPP 12 */
-				interrupt-parent = <&PIC>;
-				reg = <3>;
-			};
-		};
-
-		ethernet-group@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,mv64360-eth-group";
-			reg = <0x2000 0x2000>;
-			ethernet@0 {
-				device_type = "network";
-				compatible = "marvell,mv64360-eth";
-				reg = <0>;
-				interrupts = <32>;
-				interrupt-parent = <&PIC>;
-				phy = <&PHY0>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-			ethernet@1 {
-				device_type = "network";
-				compatible = "marvell,mv64360-eth";
-				reg = <1>;
-				interrupts = <33>;
-				interrupt-parent = <&PIC>;
-				phy = <&PHY1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-		};
-
-		SDMA0: sdma@4000 {
-			compatible = "marvell,mv64360-sdma";
-			reg = <0x4000 0xc18>;
-			virtual-reg = <0xf1004000>;
-			interrupts = <36>;
-			interrupt-parent = <&PIC>;
-		};
-
-		SDMA1: sdma@6000 {
-			compatible = "marvell,mv64360-sdma";
-			reg = <0x6000 0xc18>;
-			virtual-reg = <0xf1006000>;
-			interrupts = <38>;
-			interrupt-parent = <&PIC>;
-		};
-
-		BRG0: brg@b200 {
-			compatible = "marvell,mv64360-brg";
-			reg = <0xb200 0x8>;
-			clock-src = <8>;
-			clock-frequency = <133333333>;
-			current-speed = <9600>;
-		};
-
-		BRG1: brg@b208 {
-			compatible = "marvell,mv64360-brg";
-			reg = <0xb208 0x8>;
-			clock-src = <8>;
-			clock-frequency = <133333333>;
-			current-speed = <9600>;
-		};
-
-		CUNIT: cunit@f200 {
-			reg = <0xf200 0x200>;
-		};
-
-		MPSCROUTING: mpscrouting@b400 {
-			reg = <0xb400 0xc>;
-		};
-
-		MPSCINTR: mpscintr@b800 {
-			reg = <0xb800 0x100>;
-			virtual-reg = <0xf100b800>;
-		};
-
-		MPSC0: mpsc@8000 {
-			compatible = "marvell,mv64360-mpsc";
-			reg = <0x8000 0x38>;
-			virtual-reg = <0xf1008000>;
-			sdma = <&SDMA0>;
-			brg = <&BRG0>;
-			cunit = <&CUNIT>;
-			mpscrouting = <&MPSCROUTING>;
-			mpscintr = <&MPSCINTR>;
-			cell-index = <0>;
-			interrupts = <40>;
-			interrupt-parent = <&PIC>;
-		};
-
-		MPSC1: mpsc@9000 {
-			compatible = "marvell,mv64360-mpsc";
-			reg = <0x9000 0x38>;
-			virtual-reg = <0xf1009000>;
-			sdma = <&SDMA1>;
-			brg = <&BRG1>;
-			cunit = <&CUNIT>;
-			mpscrouting = <&MPSCROUTING>;
-			mpscintr = <&MPSCINTR>;
-			cell-index = <1>;
-			interrupts = <42>;
-			interrupt-parent = <&PIC>;
-		};
-
-		wdt@b410 {			/* watchdog timer */
-			compatible = "marvell,mv64360-wdt";
-			reg = <0xb410 0x8>;
-		};
-
-		i2c@c000 {
-			device_type = "i2c";
-			compatible = "marvell,mv64360-i2c";
-			reg = <0xc000 0x20>;
-			virtual-reg = <0xf100c000>;
-			interrupts = <37>;
-			interrupt-parent = <&PIC>;
-		};
-
-		PIC: pic {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			compatible = "marvell,mv64360-pic";
-			reg = <0x0 0x88>;
-			interrupt-controller;
-		};
-
-		mpp@f000 {
-			compatible = "marvell,mv64360-mpp";
-			reg = <0xf000 0x10>;
-		};
-
-		gpp@f100 {
-			compatible = "marvell,mv64360-gpp";
-			reg = <0xf100 0x20>;
-		};
-
-		pci@80000000 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			compatible = "marvell,mv64360-pci";
-			reg = <0xcf8 0x8>;
-			ranges = <0x01000000 0x0        0x0
-					0x88000000 0x0 0x01000000
-				  0x02000000 0x0 0x80000000
-				  	0x80000000 0x0 0x08000000>;
-			bus-range = <0 255>;
-			clock-frequency = <66000000>;
-			interrupt-pci-iack = <0xc34>;
-			interrupt-parent = <&PIC>;
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* IDSEL 0x0a */
-				0x5000 0 0 1 &PIC 80
-				0x5000 0 0 2 &PIC 81
-				0x5000 0 0 3 &PIC 91
-				0x5000 0 0 4 &PIC 93
-
-				/* IDSEL 0x0b */
-				0x5800 0 0 1 &PIC 91
-				0x5800 0 0 2 &PIC 93
-				0x5800 0 0 3 &PIC 80
-				0x5800 0 0 4 &PIC 81
-
-				/* IDSEL 0x0c */
-				0x6000 0 0 1 &PIC 91
-				0x6000 0 0 2 &PIC 93
-				0x6000 0 0 3 &PIC 80
-				0x6000 0 0 4 &PIC 81
-
-				/* IDSEL 0x0d */
-				0x6800 0 0 1 &PIC 93
-				0x6800 0 0 2 &PIC 80
-				0x6800 0 0 3 &PIC 81
-				0x6800 0 0 4 &PIC 91
-			>;
-		};
-
-		cpu-error@0070 {
-			compatible = "marvell,mv64360-cpu-error";
-			reg = <0x70 0x10 0x128 0x28>;
-			interrupts = <3>;
-			interrupt-parent = <&PIC>;
-		};
-
-		sram-ctrl@0380 {
-			compatible = "marvell,mv64360-sram-ctrl";
-			reg = <0x380 0x80>;
-			interrupts = <13>;
-			interrupt-parent = <&PIC>;
-		};
-
-		pci-error@1d40 {
-			compatible = "marvell,mv64360-pci-error";
-			reg = <0x1d40 0x40 0xc28 0x4>;
-			interrupts = <12>;
-			interrupt-parent = <&PIC>;
-		};
-
-		mem-ctrl@1400 {
-			compatible = "marvell,mv64360-mem-ctrl";
-			reg = <0x1400 0x60>;
-			interrupts = <17>;
-			interrupt-parent = <&PIC>;
-		};
-	};
-
-	chosen {
-		bootargs = "ip=on";
-		linux,stdout-path = &MPSC0;
-	};
-};
diff --git a/src/powerpc/ps3.dts b/src/powerpc/ps3.dts
deleted file mode 100644
index 96ba5b512afe..000000000000
--- a/src/powerpc/ps3.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- *  PS3 Game Console device tree.
- *
- *  Copyright (C) 2007 Sony Computer Entertainment Inc.
- *  Copyright 2007 Sony Corp.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/dts-v1/;
-
-/ {
-	model = "SonyPS3";
-	compatible = "sony,ps3";
-	#size-cells = <2>;
-	#address-cells = <2>;
-
-	chosen {
-	};
-
-	/*
-	 * We'll get the size of the bootmem block from lv1 after startup,
-	 * so we'll put a null entry here.
-	 */
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000 0x00000000>;
-	};
-
-	/*
-	 * The boot cpu is always zero for PS3.
-	 *
-	 * dtc expects a clock-frequency and timebase-frequency entries, so
-	 * we'll put a null entries here.  These will be initialized after
-	 * startup with data from lv1.
-	 *
-	 * Seems the only way currently to indicate a processor has multiple
-	 * threads is with an ibm,ppc-interrupt-server#s entry.  We'll put one
-	 * here so we can bring up both of ours.  See smp_setup_cpu_maps().
-	 */
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu@0 {
-			device_type = "cpu";
-			reg = <0x00000000>;
-			ibm,ppc-interrupt-server#s = <0x0 0x1>;
-			clock-frequency = <0>;
-			timebase-frequency = <0>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			i-cache-line-size = <128>;
-			d-cache-line-size = <128>;
-		};
-	};
-};
diff --git a/src/powerpc/rainier.dts b/src/powerpc/rainier.dts
deleted file mode 100644
index 9684c80e4093..000000000000
--- a/src/powerpc/rainier.dts
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Device Tree Source for AMCC Rainier
- *
- * Based on Sequoia code
- * Copyright (c) 2007 MontaVista Software, Inc.
- *
- * FIXME: Draft only!
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "amcc,rainier";
-	compatible = "amcc,rainier";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-		serial2 = &UART2;
-		serial3 = &UART3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,440GRx";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-440grx","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-440grx","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-440grx","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	plb {
-		compatible = "ibm,plb-440grx", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		DMA0: dma {
-			compatible = "ibm,dma-440grx", "ibm,dma-4xx";
-			dcr-reg = <0x100 0x027>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-		  	compatible = "ibm,opb-440grx", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
-			          0x80000000 0x00000001 0x80000000 0x80000000>;
-		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <0x7 0x4>;
-		  	clock-frequency = <0>; /* Filled in by zImage */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-440grx", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl256n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "Kernel";
-						reg = <0x00000000 0x00180000>;
-					};
-					partition@180000 {
-						label = "ramdisk";
-						reg = <0x00180000 0x00200000>;
-					};
-					partition@380000 {
-						label = "file system";
-						reg = <0x00380000 0x03aa0000>;
-					};
-					partition@3e20000 {
-						label = "kozio";
-						reg = <0x03e20000 0x00140000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-
-			};
-
-			UART0: serial@ef600300 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600300 0x00000008>;
-		   		virtual-reg = <0xef600300>;
-		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <115200>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0x0 0x4>;
-	   		};
-
-			UART1: serial@ef600400 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600400 0x00000008>;
-		   		virtual-reg = <0xef600400>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0x1 0x4>;
-	   		};
-
-			UART2: serial@ef600500 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600500 0x00000008>;
-		   		virtual-reg = <0xef600500>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <0x3 0x4>;
-	   		};
-
-			UART3: serial@ef600600 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600600 0x00000008>;
-		   		virtual-reg = <0xef600600>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <0x4 0x4>;
-	   		};
-
-			IIC0: i2c@ef600700 {
-				compatible = "ibm,iic-440grx", "ibm,iic";
-				reg = <0xef600700 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			IIC1: i2c@ef600800 {
-				compatible = "ibm,iic-440grx", "ibm,iic";
-				reg = <0xef600800 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-			ZMII0: emac-zmii@ef600d00 {
-				compatible = "ibm,zmii-440grx", "ibm,zmii";
-				reg = <0xef600d00 0x0000000c>;
-			};
-
-			RGMII0: emac-rgmii@ef601000 {
-				compatible = "ibm,rgmii-440grx", "ibm,rgmii";
-				reg = <0xef601000 0x00000008>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@ef600e00 {
-				device_type = "network";
-				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
-						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
-				reg = <0xef600e00 0x00000074>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <0>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600f00 {
-				device_type = "network";
-				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
-						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
-				reg = <0xef600f00 0x00000074>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <1>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCI0: pci@1ec000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb440grx-pci", "ibm,plb-pci";
-			primary;
-			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
-			       0x00000001 0xeed00000 0x00000004	/* IACK */
-			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
-			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed. Chip supports a second
-			 * IO range but we don't use it for now
-			 */
-			ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000
-				0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000
-				0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* All PCI interrupts are routed to IRQ 67 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
-			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-		bootargs = "console=ttyS0,115200";
-	};
-};
diff --git a/src/powerpc/redwood.dts b/src/powerpc/redwood.dts
deleted file mode 100644
index d86a3a498118..000000000000
--- a/src/powerpc/redwood.dts
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * Device Tree Source for AMCC Redwood(460SX)
- *
- * Copyright 2008 AMCC <tmarri@amcc.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "amcc,redwood";
-	compatible = "amcc,redwood";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		serial0 = &UART0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,460SX";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-460sx","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-460sx","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-460sx","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC3: interrupt-controller3 {
-		compatible = "ibm,uic-460sx","ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x0f0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-460sx";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-460sx";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	plb {
-		compatible = "ibm,plb-460sx", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by U-Boot */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
-			dcr-reg = <0x180 0x62>;
-			num-tx-chans = <4>;
-			num-rx-chans = <32>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&UIC1>;
-			interrupts = <	/*TXEOB*/ 0x6 0x4
-					/*RXEOB*/ 0x7 0x4
-					/*SERR*/  0x1 0x4
-					/*TXDE*/  0x2 0x4
-					/*RXDE*/  0x3 0x4
-					/*COAL TX0*/ 0x18 0x2
-					/*COAL TX1*/ 0x19 0x2
-					/*COAL TX2*/ 0x1a 0x2
-					/*COAL TX3*/ 0x1b 0x2
-					/*COAL RX0*/ 0x1c 0x2
-					/*COAL RX1*/ 0x1d 0x2
-					/*COAL RX2*/ 0x1e 0x2
-					/*COAL RX3*/ 0x1f 0x2>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-460sx", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
-			clock-frequency = <0>; /* Filled in by U-Boot */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-460sx", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				/* ranges property is supplied by U-Boot */
-				interrupts = <0x6 0x4>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x0000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x001e0000>;
-					};
-					partition@1e0000 {
-						label = "dtb";
-						reg = <0x001e0000 0x00020000>;
-					};
-					partition@200000 {
-						label = "ramdisk";
-						reg = <0x00200000 0x01400000>;
-					};
-					partition@1600000 {
-						label = "jffs2";
-						reg = <0x01600000 0x00400000>;
-					};
-					partition@1a00000 {
-						label = "user";
-						reg = <0x01a00000 0x02560000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-			};
-
-			UART0: serial@ef600200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600200 0x00000008>;
-				virtual-reg = <0xef600200>;
-				clock-frequency = <0>; /* Filled in by U-Boot */
-				current-speed = <0>; /* Filled in by U-Boot */
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			RGMII0: emac-rgmii@ef600900 {
-				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
-				reg = <0xef600900 0x00000008>;
-			};
-
-			EMAC0: ethernet@ef600a00 {
-				device_type = "network";
-				compatible = "ibm,emac-460sx", "ibm,emac4";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
-						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
-				reg = <0xef600a00 0x00000070>;
-				local-mac-address = [000000000000]; /* Filled in by U-Boot */
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				rx-fifo-size-gige = <16384>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-		PCIE0: pciex@d00000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
-			primary;
-			port = <0x0>; /* port number */
-			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
-			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
-			dcr-reg = <0x100 0x020>;
-			sdr-base = <0x300>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 10 to 0x1f */
-			bus-range = <0x10 0x1f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
-		};
-
-		PCIE1: pciex@d20000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
-			primary;
-			port = <0x1>; /* port number */
-			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
-			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
-			dcr-reg = <0x120 0x020>;
-			sdr-base = <0x340>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 10 to 0x1f */
-			bus-range = <0x20 0x2f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
-		};
-
-		PCIE2: pciex@d40000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
-			primary;
-			port = <0x2>; /* port number */
-			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
-			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
-			dcr-reg = <0x140 0x020>;
-			sdr-base = <0x370>;
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* This drives busses 10 to 0x1f */
-			bus-range = <0x30 0x3f>;
-
-			/* Legacy interrupts (note the weird polarity, the bridge seems
-			 * to invert PCIe legacy interrupts).
-			 * We are de-swizzling here because the numbers are actually for
-			 * port of the root complex virtual P2P bridge. But I want
-			 * to avoid putting a node for it in the tree, so the numbers
-			 * below are basically de-swizzled numbers.
-			 * The real slot is on idsel 0, so the swizzling is 1:1
-			 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <
-				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
-				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
-				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
-				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
-		};
-
-		MSI: ppc4xx-msi@400300000 {
-				compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
-				reg = < 0x4 0x00300000 0x100
-					0x4 0x00300000 0x100>;
-				sdr-base = <0x3B0>;
-				msi-data = <0x00000000>;
-				msi-mask = <0x44440000>;
-				interrupt-count = <3>;
-				interrupts =<0 1 2 3>;
-				interrupt-parent = <&UIC0>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &UIC0 0xC 1
-					1 &UIC0 0x0D 1
-					2 &UIC0 0x0E 1
-					3 &UIC0 0x0F 1>;
-		};
-
-	};
-
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600200";
-	};
-
-};
diff --git a/src/powerpc/sam440ep.dts b/src/powerpc/sam440ep.dts
deleted file mode 100644
index f0663be10421..000000000000
--- a/src/powerpc/sam440ep.dts
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * Device Tree Source for ACube Sam440ep  based off bamboo.dts code 
- * original copyrights below 
- *
- * Copyright (c) 2006, 2007 IBM Corp.
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- *
- * Modified from bamboo.dts for sam440ep:
- * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "acube,sam440ep";
-	compatible = "acube,sam440ep";
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-		serial2 = &UART2;
-		serial3 = &UART3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,440EP";
-			reg = <0>;
-			clock-frequency = <0>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-440ep","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 9>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-440ep","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 9>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 4 0x1f 4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-440ep";
-		dcr-reg = <0x00e 2>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-440ep";
-		dcr-reg = <0x00c 2>;
-	};
-
-	plb {
-		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <0x010 2>;
-		};
-
-		DMA0: dma {
-			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <0x100 0x027>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <4>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 10 4
-					/*RXEOB*/ 1 &UIC0 11 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-		};
-
-		POB0: opb {
-		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
-			 * bits.
-			 */
-		  	ranges = <0x00000000 0 0x00000000 0x80000000
-			          0x80000000 0 0x80000000 0x80000000>;
-		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
-		  	clock-frequency = <0>; /* Filled in by zImage */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <0x012 2>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
-				interrupt-parent = <&UIC1>;
-			};
-
-			UART0: serial@ef600300 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600300 8>;
-		   		virtual-reg = <0xef600300>;
-		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <0x1c200>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
-	   		};
-
-			UART1: serial@ef600400 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600400 8>;
-		   		virtual-reg = <0xef600400>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
-	   		};
-
-			UART2: serial@ef600500 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600500 8>;
-		   		virtual-reg = <0xef600500>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <3 4>;
-	   		};
-
-			UART3: serial@ef600600 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600600 8>;
-		   		virtual-reg = <0xef600600>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <4 4>;
-	   		};
-
-			IIC0: i2c@ef600700 {
-                                #address-cells = <1>;
-                                #size-cells = <0>;
-				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				index = <0>;
-				reg = <0xef600700 0x14>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
-				rtc@68 {
-					compatible = "stm,m41t80";
-					reg = <0x68>;
-				};
-			};
-
-			IIC1: i2c@ef600800 {
-				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				index = <5>;
-				reg = <0xef600800 0x14>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
-			};
-
-			ZMII0: emac-zmii@ef600d00 {
-				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <0xef600d00 0xc>;
-			};
-
-			EMAC0: ethernet@ef600e00 {
-				linux,network-index = <0>;
-				device_type = "network";
-				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1c 4 0x1d 4>;
-				reg = <0xef600e00 0x70>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0 1>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <0x5dc>;
-				rx-fifo-size = <0x1000>;
-				tx-fifo-size = <0x800>;
-				phy-mode = "rmii";
-				phy-map = <00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <0>;
-			};
-
-			EMAC1: ethernet@ef600f00 {
-				linux,network-index = <1>;
-				device_type = "network";
-				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1e 4 0x1f 4>;
-				reg = <0xef600f00 0x70>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <2 3>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <0x5dc>;
-				rx-fifo-size = <0x1000>;
-				tx-fifo-size = <0x800>;
-				phy-mode = "rmii";
-				phy-map = <00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <1>;
-			};
-			usb@ef601000 {
-				compatible = "ohci-be";
-				reg = <0xef601000 0x80>;
-				interrupts = <8 4 9 4>;
-				interrupt-parent = <&UIC1>;
-			};	
-		};
-
-		PCI0: pci@ec000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
-			primary;
-			reg = <0 0xeec00000 8	   /* Config space access */
-			       0 0xeed00000 4	   /* IACK */
-			       0 0xeed00000 4	   /* Special cycle */
-			       0 0xef400000 0x40>; /* Internal registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed. Chip supports a second
-			 * IO range but we don't use it for now
-			 */
-			ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
-				  0x01000000 0 0x00000000 0 0xe8000000 0 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0 0 0 0 0 0x80000000>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};
diff --git a/src/powerpc/sbc8349.dts b/src/powerpc/sbc8349.dts
deleted file mode 100644
index fc89e00b765c..000000000000
--- a/src/powerpc/sbc8349.dts
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * SBC8349E Device Tree Source
- *
- * Copyright 2007 Wind River Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- *	-based largely on the Freescale MPC834x_MDS dts.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "SBC8349E";
-	compatible = "SBC834xE";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8349@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	// 256MB at 0
-	};
-
-	soc8349@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		/* phy type (ULPI or SERIAL) are only types supported for MPH */
-		/* port = 0 or 1 */
-		usb@22000 {
-			compatible = "fsl-usb2-mph";
-			reg = <0x22000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <39 0x8>;
-			phy_type = "ulpi";
-			port0;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			linux,network-index = <0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@19 {
-					interrupt-parent = <&ipic>;
-					interrupts = <20 0x8>;
-					reg = <0x19>;
-				};
-
-				phy1: ethernet-phy@1a {
-					interrupt-parent = <&ipic>;
-					interrupts = <21 0x8>;
-					reg = <0x1a>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			linux,network-index = <1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8349-localbus", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-		ranges = <0x0 0x0 0xff800000 0x00800000		/* 8MB Flash */
-			  0x1 0x0 0xf8000000 0x00002000		/* 8KB EEPROM */
-			  0x2 0x0 0x10000000 0x04000000		/* 64MB SDRAM */
-			  0x3 0x0 0x10000000 0x04000000>;	/* 64MB SDRAM */
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "intel,28F640J3A", "cfi-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x006c0000>;
-			};
-
-			partition@700000 {
-				label = "legacy u-boot";
-				reg = <0x00700000 0x00100000>;
-				read-only;
-			};
-
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 48 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 17 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 18 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 19 0x8>;
-
-		interrupt-parent = <&ipic>;
-		interrupts = <0x42 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-};
diff --git a/src/powerpc/sbc8548-altflash.dts b/src/powerpc/sbc8548-altflash.dts
deleted file mode 100644
index 0b38a0defd2c..000000000000
--- a/src/powerpc/sbc8548-altflash.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * SBC8548 Device Tree Source
- *
- * Configured for booting off the alternate (64MB SODIMM) flash.
- * Requires switching JP12 jumpers and changing SW2.8 setting.
- *
- * Copyright 2013 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-
-/dts-v1/;
-
-/include/ "sbc8548-pre.dtsi"
-
-/{
-	localbus@e0000000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		reg = <0xe0000000 0x5000>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0x0 0x0 0xfc000000 0x04000000		/*64MB Flash*/
-			  0x3 0x0 0xf0000000 0x04000000		/*64MB SDRAM*/
-			  0x4 0x0 0xf4000000 0x04000000 	/*64MB SDRAM*/
-			  0x5 0x0 0xf8000000 0x00b10000		/* EPLD */
-			  0x6 0x0 0xef800000 0x00800000>;	/*8MB Flash*/
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x0 0x0 0x04000000>;
-			compatible = "intel,JS28F128", "cfi-flash";
-			bank-width = <4>;
-			device-width = <1>;
-			partition@0x0 {
-				label = "space";
-				/* FC000000 -> FFEFFFFF */
-				reg = <0x00000000 0x03f00000>;
-			};
-			partition@0x03f00000 {
-				label = "bootloader";
-				/* FFF00000 -> FFFFFFFF */
-				reg = <0x03f00000 0x00100000>;
-				read-only;
-			};
-                };
-
-
-		epld@5,0 {
-			compatible = "wrs,epld-localbus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <0x5 0x0 0x00b10000>;
-			ranges = <
-				0x0 0x0 0x5 0x000000 0x1fff	/* LED */
-				0x1 0x0 0x5 0x100000 0x1fff	/* Switches */
-				0x3 0x0 0x5 0x300000 0x1fff	/* HW Rev. */
-				0xb 0x0	0x5 0xb00000 0x1fff	/* EEPROM */
-			>;
-
-			led@0,0 {
-				compatible = "led";
-				reg = <0x0 0x0 0x1fff>;
-			};
-
-			switches@1,0 {
-				compatible = "switches";
-				reg = <0x1 0x0 0x1fff>;
-			};
-
-			hw-rev@3,0 {
-				compatible = "hw-rev";
-				reg = <0x3 0x0 0x1fff>;
-			};
-
-			eeprom@b,0 {
-				compatible = "eeprom";
-				reg = <0xb 0 0x1fff>;
-			};
-
-		};
-
-		alt-flash@6,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "intel,JS28F640", "cfi-flash";
-			reg = <0x6 0x0 0x800000>;
-			bank-width = <1>;
-			device-width = <1>;
-			partition@0x0 {
-				label = "space";
-				/* EF800000 -> EFF9FFFF */
-				reg = <0x00000000 0x007a0000>;
-			};
-			partition@0x7a0000 {
-				label = "bootloader";
-				/* EFFA0000 -> EFFFFFFF */
-				reg = <0x007a0000 0x00060000>;
-				read-only;
-			};
-		};
-
-
-        };
-};
-
-/include/ "sbc8548-post.dtsi"
diff --git a/src/powerpc/sbc8548-post.dtsi b/src/powerpc/sbc8548-post.dtsi
deleted file mode 100644
index 9b505c8e5350..000000000000
--- a/src/powerpc/sbc8548-post.dtsi
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * SBC8548 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/{
-	soc8548@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x00000000 0xe0000000 0x00100000>;
-		bus-frequency = <0>;
-		compatible = "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8548-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <0x12 0x2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8548-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <0x20>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
-			interrupt-parent = <&mpic>;
-			interrupts = <0x10 0x2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@19 {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x6 0x1>;
-					reg = <0x19>;
-				};
-				phy1: ethernet-phy@1a {
-					interrupt-parent = <&mpic>;
-					interrupts = <0x7 0x1>;
-					reg = <0x1a>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;	// reg base, size
-			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <0x2a 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <0x2a 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities reg
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0xfe>;
-			fsl,descriptor-types-mask = <0x12b0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-	};
-
-	pci0: pci@e0008000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x01 (PCI-X slot) @66MHz */
-			0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
-			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <0x18 0x2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
-		clock-frequency = <66000000>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-	};
-
-	pci1: pcie@e000a000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x0 (PEX) */
-			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <0x1a 0x2>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
-		clock-frequency = <33000000>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe000a000 0x1000>;
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xa0000000
-				  0x02000000 0x0 0xa0000000
-				  0x0 0x10000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00800000>;
-		};
-	};
-};
diff --git a/src/powerpc/sbc8548-pre.dtsi b/src/powerpc/sbc8548-pre.dtsi
deleted file mode 100644
index d8c66290c5b4..000000000000
--- a/src/powerpc/sbc8548-pre.dtsi
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * SBC8548 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/{
-	model = "SBC8548";
-	compatible = "SBC8548";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8548@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <0x20>;	// 32 bytes
-			i-cache-line-size = <0x20>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-};
diff --git a/src/powerpc/sbc8548.dts b/src/powerpc/sbc8548.dts
deleted file mode 100644
index 1df2a0955668..000000000000
--- a/src/powerpc/sbc8548.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * SBC8548 Device Tree Source
- *
- * Copyright 2007 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-
-/dts-v1/;
-
-/include/ "sbc8548-pre.dtsi"
-
-/{
-	localbus@e0000000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		reg = <0xe0000000 0x5000>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0x0 0x0 0xff800000 0x00800000		/*8MB Flash*/
-			  0x3 0x0 0xf0000000 0x04000000		/*64MB SDRAM*/
-			  0x4 0x0 0xf4000000 0x04000000 	/*64MB SDRAM*/
-			  0x5 0x0 0xf8000000 0x00b10000		/* EPLD */
-			  0x6 0x0 0xec000000 0x04000000>;	/*64MB Flash*/
-
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "intel,JS28F640", "cfi-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <1>;
-			device-width = <1>;
-			partition@0x0 {
-				label = "space";
-				/* FF800000 -> FFF9FFFF */
-				reg = <0x00000000 0x007a0000>;
-			};
-			partition@0x7a0000 {
-				label = "bootloader";
-				/* FFFA0000 -> FFFFFFFF */
-				reg = <0x007a0000 0x00060000>;
-				read-only;
-			};
-		};
-
-		epld@5,0 {
-			compatible = "wrs,epld-localbus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <0x5 0x0 0x00b10000>;
-			ranges = <
-				0x0 0x0 0x5 0x000000 0x1fff	/* LED */
-				0x1 0x0 0x5 0x100000 0x1fff	/* Switches */
-				0x3 0x0 0x5 0x300000 0x1fff	/* HW Rev. */
-				0xb 0x0	0x5 0xb00000 0x1fff	/* EEPROM */
-			>;
-
-			led@0,0 {
-				compatible = "led";
-				reg = <0x0 0x0 0x1fff>;
-			};
-
-			switches@1,0 {
-				compatible = "switches";
-				reg = <0x1 0x0 0x1fff>;
-			};
-
-			hw-rev@3,0 {
-				compatible = "hw-rev";
-				reg = <0x3 0x0 0x1fff>;
-			};
-
-			eeprom@b,0 {
-				compatible = "eeprom";
-				reg = <0xb 0 0x1fff>;
-			};
-
-		};
-
-		alt-flash@6,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x6 0x0 0x04000000>;
-			compatible = "intel,JS28F128", "cfi-flash";
-			bank-width = <4>;
-			device-width = <1>;
-			partition@0x0 {
-				label = "space";
-				/* EC000000 -> EFEFFFFF */
-				reg = <0x00000000 0x03f00000>;
-			};
-			partition@0x03f00000 {
-				label = "bootloader";
-				/* EFF00000 -> EFFFFFFF */
-				reg = <0x03f00000 0x00100000>;
-				read-only;
-			};
-                };
-        };
-};
-
-/include/ "sbc8548-post.dtsi"
diff --git a/src/powerpc/sbc8641d.dts b/src/powerpc/sbc8641d.dts
deleted file mode 100644
index 631ede72e226..000000000000
--- a/src/powerpc/sbc8641d.dts
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * SBC8641D Device Tree Source
- *
- * Copyright 2008 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "SBC8641D";
-	compatible = "wind,sbc8641";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;		// L1
-			i-cache-size = <32768>;		// L1
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512M at 0x0
-	};
-
-	localbus@f8005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
-		reg = <0xf8005000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
-			  1 0 0xf0000000 0x00010000	// 64KB EEPROM
-			  2 0 0xf1000000 0x00100000	// EPLD (1MB)
-			  3 0 0xe0000000 0x04000000	// 64MB LB SDRAM (CS3)
-			  4 0 0xe4000000 0x04000000	// 64MB LB SDRAM (CS4)
-			  6 0 0xf4000000 0x00100000	// LCD display (1MB)
-			  7 0 0xe8000000 0x04000000>;	// 64MB OneNAND
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x01000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "dtb";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-			partition@300000 {
-				label = "kernel";
-				reg = <0x00100000 0x00400000>;
-				read-only;
-			};
-			partition@400000 {
-				label = "fs";
-				reg = <0x00500000 0x00a00000>;
-			};
-			partition@700000 {
-				label = "firmware";
-				reg = <0x00f00000 0x00100000>;
-				read-only;
-			};
-		};
-
-		epld@2,0 {
-			compatible = "wrs,epld-localbus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <2 0 0x100000>;
-			ranges = <0 0 5 0 1	// User switches
-				  1 0 5 1 1	// Board ID/Rev
-				  3 0 5 3 1>;	// LEDs
-		};
-	};
-
-	soc@f8000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf8000000 0x00100000>;
-		bus-frequency = <0>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30  2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@1f {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x1f>;
-				};
-				phy1: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0>;
-				};
-				phy2: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <1>;
-				};
-				phy3: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <2>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <28 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-			big-endian;
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@f8008000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xf8008000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		interrupt-map-mask = <0xff00 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0000 0 0 1 &mpic 0 1
-			0x0000 0 0 2 &mpic 1 1
-			0x0000 0 0 3 &mpic 2 1
-			0x0000 0 0 4 &mpic 3 1
-			>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0x80000000
-				  0x02000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00100000>;
-		};
-
-	};
-
-	pci1: pcie@f8009000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xf8009000 0x1000>;
-		bus-range = <0 0xff>;
-		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0000 0 0 1 &mpic 4 1
-			0x0000 0 0 2 &mpic 5 1
-			0x0000 0 0 3 &mpic 6 1
-			0x0000 0 0 4 &mpic 7 1
-			>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xa0000000
-				  0x02000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00100000>;
-		};
-	};
-};
diff --git a/src/powerpc/sequoia.dts b/src/powerpc/sequoia.dts
deleted file mode 100644
index b1d329246b08..000000000000
--- a/src/powerpc/sequoia.dts
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * Device Tree Source for AMCC Sequoia
- *
- * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com>
- * Copyright (c) 2006, 2007 IBM Corp.
- *
- * FIXME: Draft only!
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "amcc,sequoia";
-	compatible = "amcc,sequoia";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-		serial2 = &UART2;
-		serial3 = &UART3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,440EPx";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-440epx","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-440epx","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-440epx","ibm,uic";
-		interrupt-controller;
-		cell-index = <2>;
-		dcr-reg = <0x0e0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	plb {
-		compatible = "ibm,plb-440epx", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		CRYPTO: crypto@e0100000 {
-			compatible = "amcc,ppc440epx-crypto","amcc,ppc4xx-crypto";
-			reg = <0 0xE0100000 0x80400>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <0x17 0x4>;
-		};
-
-		rng@e0120000 {
-			compatible = "amcc,ppc440epx-rng","amcc,ppc4xx-rng";
-			reg = <0 0xE0120000 0x150>;
-		};
-
-		DMA0: dma {
-			compatible = "ibm,dma-440epx", "ibm,dma-4xx";
-			dcr-reg = <0x100 0x027>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-440epx", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <2>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		USB1: usb@e0000400 {
-			compatible = "ibm,usb-ohci-440epx", "ohci-be";
-			reg = <0x00000000 0xe0000400 0x00000060>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <0x15 0x8>;
-		};
-
-		USB0: ehci@e0000300 {
-			compatible = "ibm,usb-ehci-440epx", "usb-ehci";
-			interrupt-parent = <&UIC0>;
-			interrupts = <0x1a 0x4>;
-			reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>;
-			big-endian;
-		};
-
-		POB0: opb {
-		  	compatible = "ibm,opb-440epx", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
-			          0x80000000 0x00000001 0x80000000 0x80000000>;
-		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <0x7 0x4>;
-		  	clock-frequency = <0>; /* Filled in by zImage */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-440epx", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl256n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "Kernel";
-						reg = <0x00000000 0x00180000>;
-					};
-					partition@180000 {
-						label = "ramdisk";
-						reg = <0x00180000 0x00200000>;
-					};
-					partition@380000 {
-						label = "file system";
-						reg = <0x00380000 0x03aa0000>;
-					};
-					partition@3e20000 {
-						label = "kozio";
-						reg = <0x03e20000 0x00140000>;
-					};
-					partition@3f60000 {
-						label = "env";
-						reg = <0x03f60000 0x00040000>;
-					};
-					partition@3fa0000 {
-						label = "u-boot";
-						reg = <0x03fa0000 0x00060000>;
-					};
-				};
-
-				ndfc@3,0 {
-					compatible = "ibm,ndfc";
-					reg = <0x00000003 0x00000000 0x00002000>;
-					ccr = <0x00001000>;
-					bank-settings = <0x80002222>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					nand {
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						partition@0 {
-							label = "u-boot";
-							reg = <0x00000000 0x00084000>;
-						};
-						partition@84000 {
-							label = "user";
-							reg = <0x00000000 0x01f7c000>;
-						};
-					};
-				};
-			};
-
-			UART0: serial@ef600300 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600300 0x00000008>;
-		   		virtual-reg = <0xef600300>;
-		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <115200>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0x0 0x4>;
-	   		};
-
-			UART1: serial@ef600400 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600400 0x00000008>;
-		   		virtual-reg = <0xef600400>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0x1 0x4>;
-	   		};
-
-			UART2: serial@ef600500 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600500 0x00000008>;
-		   		virtual-reg = <0xef600500>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <0x3 0x4>;
-	   		};
-
-			UART3: serial@ef600600 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600600 0x00000008>;
-		   		virtual-reg = <0xef600600>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <0x4 0x4>;
-	   		};
-
-			IIC0: i2c@ef600700 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "ibm,iic-440epx", "ibm,iic";
-				reg = <0xef600700 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-
-				hwmon@48 {
-					compatible = "adi,ad7414";
-					reg = <0x48>;
-				};
-			};
-
-			IIC1: i2c@ef600800 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "ibm,iic-440epx", "ibm,iic";
-				reg = <0xef600800 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-			ZMII0: emac-zmii@ef600d00 {
-				compatible = "ibm,zmii-440epx", "ibm,zmii";
-				reg = <0xef600d00 0x0000000c>;
-			};
-
-			RGMII0: emac-rgmii@ef601000 {
-				compatible = "ibm,rgmii-440epx", "ibm,rgmii";
-				reg = <0xef601000 0x00000008>;
-				has-mdio;
-			};
-
-			EMAC0: ethernet@ef600e00 {
-				device_type = "network";
-				compatible = "ibm,emac-440epx", "ibm,emac4";
-				interrupt-parent = <&EMAC0>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
-						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
-				reg = <0xef600e00 0x00000074>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <0>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-
-			EMAC1: ethernet@ef600f00 {
-				device_type = "network";
-				compatible = "ibm,emac-440epx", "ibm,emac4";
-				interrupt-parent = <&EMAC1>;
-				interrupts = <0x0 0x1>;
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
-						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
-				reg = <0xef600f00 0x00000074>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-map = <0x00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <1>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
-				has-inverted-stacr-oc;
-				has-new-stacr-staopc;
-			};
-		};
-
-		PCI0: pci@1ec000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
-			primary;
-			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
-			       0x00000001 0xeed00000 0x00000004	/* IACK */
-			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
-			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed. Chip supports a second
-			 * IO range but we don't use it for now
-			 * From the 440EPx user manual:
-			 * PCI 1 Memory     1 8000 0000     1 BFFF FFFF     1GB
-			 * I/O              1 E800 0000     1 E800 FFFF     64KB
-			 * I/O              1 E880 0000     1 EBFF FFFF     56MB
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000
-				0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000
-				0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* All PCI interrupts are routed to IRQ 67 */
-			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
-			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-		bootargs = "console=ttyS0,115200";
-	};
-};
diff --git a/src/powerpc/socrates.dts b/src/powerpc/socrates.dts
deleted file mode 100644
index 134a5ff917e1..000000000000
--- a/src/powerpc/socrates.dts
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * Device Tree Source for the Socrates board (MPC8544).
- *
- * Copyright (c) 2008 Emcraft Systems.
- * Sergei Poselenov, <sposelenov@emcraft.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "abb,socrates";
-	compatible = "abb,socrates";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8544@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
-	};
-
-	soc8544@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-
-		ranges = <0x00000000 0xe0000000 0x00100000>;
-		bus-frequency = <0>;		// Filled in by U-Boot
-		compatible = "fsl,mpc8544-immr", "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8544-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8544-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8544-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl,mpc8544-i2c", "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			fsl,preserve-clocking;
-
-			dtt@28 {
-				compatible = "winbond,w83782d";
-				reg = <0x28>;
-			};
-			rtc@32 {
-				compatible = "epson,rx8025";
-				reg = <0x32>;
-				interrupts = <7 1>;
-				interrupt-parent = <&mpic>;
-			};
-			dtt@4c {
-				compatible = "dallas,ds75";
-				reg = <0x4c>;
-			};
-			ts@4a {
-				compatible = "ti,tsc2003";
-				reg = <0x4a>;
-				interrupt-parent = <&mpic>;
-				interrupts = <8 1>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl,mpc8544-i2c", "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			fsl,preserve-clocking;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy0>;
-			tbi-handle = <&tbi0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <0 1>;
-					reg = <0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <0 1>;
-					reg = <1>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy1>;
-			tbi-handle = <&tbi1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-	};
-
-
-	localbus {
-		compatible = "fsl,mpc8544-localbus",
-		             "fsl,pq3-localbus",
-			     "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xe0005000 0x40>;
-		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
-
-		ranges = <0 0 0xfc000000 0x04000000
-			  2 0 0xc8000000 0x04000000
-			  3 0 0xc0000000 0x00100000
-			>; /* Overwritten by U-Boot */
-
-		nor_flash@0,0 {
-			compatible = "amd,s29gl256n", "cfi-flash";
-			bank-width = <2>;
-			reg = <0x0 0x000000 0x4000000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "kernel";
-				reg = <0x0 0x1e0000>;
-				read-only;
-			};
-			partition@1e0000 {
-				label = "dtb";
-				reg = <0x1e0000 0x20000>;
-			};
-			partition@200000 {
-				label = "root";
-				reg = <0x200000 0x200000>;
-			};
-			partition@400000 {
-				label = "user";
-				reg = <0x400000 0x3b80000>;
-			};
-			partition@3f80000 {
-				label = "env";
-				reg = <0x3f80000 0x40000>;
-				read-only;
-			};
-			partition@3fc0000 {
-				label = "u-boot";
-				reg = <0x3fc0000 0x40000>;
-				read-only;
-			};
-		};
-
-		display@2,0 {
-			compatible = "fujitsu,lime";
-			reg = <2 0x0 0x4000000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <6 1>;
-		};
-
-		fpga_pic: fpga-pic@3,10 {
-			compatible = "abb,socrates-fpga-pic";
-			reg = <3 0x10 0x10>;
-			interrupt-controller;
-			/* IRQs 2, 10, 11, active low, level-sensitive */
-			interrupts = <2 1 10 1 11 1>;
-			interrupt-parent = <&mpic>;
-			#interrupt-cells = <3>;
-		};
-
-		spi@3,60 {
-			compatible = "abb,socrates-spi";
-			reg = <3 0x60 0x10>;
-			interrupts = <8 4 0>;	// number, type, routing
-			interrupt-parent = <&fpga_pic>;
-		};
-
-		nand@3,70 {
-			compatible = "abb,socrates-nand";
-			reg = <3 0x70 0x04>;
-			bank-width = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			data@0 {
-				label = "data";
-				reg = <0x0 0x40000000>;
-			};
-		};
-
-		can@3,100 {
-			compatible = "philips,sja1000";
-			reg = <3 0x100 0x80>;
-			interrupts = <2 8 1>;	// number, type, routing
-			interrupt-parent = <&fpga_pic>;
-		};
-	};
-
-	pci0: pci@e0008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xe0008000 0x1000>;
-		clock-frequency = <66666666>;
-
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 1 &mpic 5 1
-				/* IDSEL 0x12 */
-				 0x9000 0x0 0x0 1 &mpic 4 1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
-	};
-
-};
diff --git a/src/powerpc/storcenter.dts b/src/powerpc/storcenter.dts
deleted file mode 100644
index 2a555738517e..000000000000
--- a/src/powerpc/storcenter.dts
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Device Tree Source for IOMEGA StorCenter
- *
- * Copyright 2007 Oyvind Repvik
- * Copyright 2007 Jon Loeliger
- *
- * Based on the Kurobox DTS by G. Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	model = "StorCenter";
-	compatible = "iomega,storcenter";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8241@0 {
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <200000000>;
-			timebase-frequency = <25000000>;
-			bus-frequency = <0>;	/* from bootwrapper */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>;
-			d-cache-size = <16384>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	/* 64MB @ 0x0 */
-	};
-
-	soc@fc000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8241", "mpc10x";
-		store-gathering = <0>; /* 0 == off, !0 == on */
-		ranges = <0x0 0xfc000000 0x100000>;
-		reg = <0xfc000000 0x100000>;	/* EUMB */
-		bus-frequency = <0>;		/* fixed by loader */
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x20>;
-			clock-frequency = <97553800>; /* Hz */
-			current-speed = <115200>;
-			interrupts = <25 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x20>;
-			clock-frequency = <97553800>; /* Hz */
-			current-speed = <9600>;
-			interrupts = <26 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: interrupt-controller@40000 {
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			device_type = "open-pic";
-			compatible = "chrp,open-pic";
-			interrupt-controller;
-			reg = <0x40000 0x40000>;
-		};
-
-	};
-
-	pci0: pci@fe800000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "mpc10x-pci";
-		reg = <0xfe800000 0x1000>;
-		ranges = <0x01000000 0x0        0x0 0xfe000000 0x0 0x00c00000
-			  0x02000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
-		bus-range = <0 0xff>;
-		clock-frequency = <97553800>;
-		interrupt-parent = <&mpic>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 13 - IDE */
-			0x6800 0 0 1 &mpic 0 1
-			0x6800 0 0 2 &mpic 0 1
-			0x6800 0 0 3 &mpic 0 1
-			0x6800 0 0 4 &mpic 0 1
-			/* IDSEL 14 - USB */
-			0x7000 0 0 1 &mpic 0 1
-			0x7000 0 0 2 &mpic 0 1
-			0x7000 0 0 3 &mpic 0 1
-			0x7000 0 0 4 &mpic 0 1
-			/* IDSEL 15 - ETH */
-			0x7800 0 0 1 &mpic 0 1
-			0x7800 0 0 2 &mpic 0 1
-			0x7800 0 0 3 &mpic 0 1
-			0x7800 0 0 4 &mpic 0 1
-		>;
-	};
-
-	chosen {
-		linux,stdout-path = &serial0;
-	};
-};
diff --git a/src/powerpc/stx_gp3_8560.dts b/src/powerpc/stx_gp3_8560.dts
deleted file mode 100644
index 78a72ee48205..000000000000
--- a/src/powerpc/stx_gp3_8560.dts
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * STX GP3 - 8560 ADS Device Tree Source
- *
- * Copyright 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "stx,gp3";
-	compatible = "stx,gp3-8560", "stx,gp3";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8560@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	soc@fdf00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0 0xfdf00000 0x100000>;
-		bus-frequency = <0>;
-		compatible = "fsl,mpc8560-immr", "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8540-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8540-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 4>;
-					reg = <2>;
-				};
-				phy4: ethernet-phy@4 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 4>;
-					reg = <4>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy4>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0 0x4000 0x9000 0x2000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8560-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-				clock-frequency = <0>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
-			};
-
-			serial0: serial@91a20 {
-				device_type = "serial";
-				compatible = "fsl,mpc8560-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x91a20 0x20 0x88100 0x100>;
-				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0x4a00000>;
-				interrupts = <41 8>;
-				interrupt-parent = <&cpmpic>;
-			};
-		};
-	};
-
-	pci0: pci@fdf08000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x0c */
-			0x6000 0 0 1 &mpic 1 1
-			0x6000 0 0 2 &mpic 2 1
-			0x6000 0 0 3 &mpic 3 1
-			0x6000 0 0 4 &mpic 4 1
-
-			/* IDSEL 0x0d */
-			0x6800 0 0 1 &mpic 4 1
-			0x6800 0 0 2 &mpic 1 1
-			0x6800 0 0 3 &mpic 2 1
-			0x6800 0 0 4 &mpic 3 1
-
-			/* IDSEL 0x0e */
-			0x7000 0 0 1 &mpic 3 1
-			0x7000 0 0 2 &mpic 4 1
-			0x7000 0 0 3 &mpic 1 1
-			0x7000 0 0 4 &mpic 2 1
-
-			/* IDSEL 0x0f */
-			0x7800 0 0 1 &mpic 2 1
-			0x7800 0 0 2 &mpic 3 1
-			0x7800 0 0 3 &mpic 4 1
-			0x7800 0 0 4 &mpic 1 1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xfdf08000 0x1000>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-	};
-};
diff --git a/src/powerpc/stxssa8555.dts b/src/powerpc/stxssa8555.dts
deleted file mode 100644
index 859f854ba538..000000000000
--- a/src/powerpc/stxssa8555.dts
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * MPC8555-based STx GP3 Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- *
- * Copyright 2010 Silicon Turnkey Express LLC.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "stx,gp3";
-        compatible = "stx,gp3-8560", "stx,gp3";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8555@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;	//  33 MHz, from uboot
-			bus-frequency = <0>;	// 166 MHz
-			clock-frequency = <0>;	// 825 MHz, from uboot
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	soc8555@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8555-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8555-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x2>;
-				};
-				phy1: ethernet-phy@4 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x4>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>; 	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x2000 0x9000 0x1000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8555-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x10 */
-			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x11 */
-			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x12 (Slot 1) */
-			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x13 (Slot 2) */
-			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
-
-			/* IDSEL 0x14 (Slot 3) */
-			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
-			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
-			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
-			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x15 (Slot 4) */
-			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* Bus 1 (Tundra Bridge) */
-			/* IDSEL 0x12 (ISA bridge) */
-			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-
-		i8259@19000 {
-			interrupt-controller;
-			device_type = "interrupt-controller";
-			reg = <0x19000 0x0 0x0 0x0 0x1>;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			compatible = "chrp,iic";
-			interrupts = <1>;
-			interrupt-parent = <&pci0>;
-		};
-	};
-
-	pci1: pci@e0009000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0009000 0x1000>;
-		compatible = "fsl,mpc8540-pci";
-		device_type = "pci";
-	};
-};
diff --git a/src/powerpc/t1040qds.dts b/src/powerpc/t1040qds.dts
deleted file mode 100644
index 973c29c2f56e..000000000000
--- a/src/powerpc/t1040qds.dts
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * T1040QDS Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/t104xsi-pre.dtsi"
-/include/ "t104xqds.dtsi"
-
-/ {
-	model = "fsl,T1040QDS";
-	compatible = "fsl,T1040QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-};
-
-/include/ "fsl/t1040si-post.dtsi"
diff --git a/src/powerpc/t1042qds.dts b/src/powerpc/t1042qds.dts
deleted file mode 100644
index 45bd03752154..000000000000
--- a/src/powerpc/t1042qds.dts
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * T1042QDS Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/t104xsi-pre.dtsi"
-/include/ "t104xqds.dtsi"
-
-/ {
-	model = "fsl,T1042QDS";
-	compatible = "fsl,T1042QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-};
-
-/include/ "fsl/t1042si-post.dtsi"
diff --git a/src/powerpc/t104xqds.dtsi b/src/powerpc/t104xqds.dtsi
deleted file mode 100644
index 234f4b596c5b..000000000000
--- a/src/powerpc/t104xqds.dtsi
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * T104xQDS Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/ {
-	model = "fsl,T1040QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xff800000 0x00010000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x2 0x0 0x10000>;
-		};
-
-		board-control@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,fpga-qixis";
-			reg = <3 0 0x300>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "micron,n25q128a11";
-				reg = <0>;
-				spi-max-frequency = <10000000>; /* input clock */
-			};
-		};
-
-		i2c@118000 {
-			pca9547@77 {
-				compatible = "philips,pca9547";
-				reg = <0x77>;
-			};
-			rtc@68 {
-				compatible = "dallas,ds3232";
-				reg = <0x68>;
-				interrupts = <0x1 0x1 0 0>;
-			};
-		};
-	};
-
-	pci0: pcie@ffe240000 {
-		reg = <0xf 0xfe240000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x10000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe250000 {
-		reg = <0xf 0xfe250000 0 0x10000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x10000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe260000 {
-		reg = <0xf 0xfe260000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x10000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci3: pcie@ffe270000 {
-		reg = <0xf 0xfe270000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x10000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-};
diff --git a/src/powerpc/t2080qds.dts b/src/powerpc/t2080qds.dts
deleted file mode 100644
index aa1d6d8c169b..000000000000
--- a/src/powerpc/t2080qds.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * T2080QDS Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/t208xsi-pre.dtsi"
-/include/ "t208xqds.dtsi"
-
-/ {
-	model = "fsl,T2080QDS";
-	compatible = "fsl,T2080QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-		port2 {
-			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
-		};
-	};
-};
-
-/include/ "fsl/t2080si-post.dtsi"
diff --git a/src/powerpc/t2080rdb.dts b/src/powerpc/t2080rdb.dts
deleted file mode 100644
index e8891047600c..000000000000
--- a/src/powerpc/t2080rdb.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * T2080PCIe-RDB Board Device Tree Source
- *
- * Copyright 2014 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/t208xsi-pre.dtsi"
-/include/ "t208xrdb.dtsi"
-
-/ {
-	model = "fsl,T2080RDB";
-	compatible = "fsl,T2080RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-		port2 {
-			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
-		};
-	};
-};
-
-/include/ "fsl/t2080si-post.dtsi"
diff --git a/src/powerpc/t2081qds.dts b/src/powerpc/t2081qds.dts
deleted file mode 100644
index 8ec80a71e102..000000000000
--- a/src/powerpc/t2081qds.dts
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * T2081QDS Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/t208xsi-pre.dtsi"
-/include/ "t208xqds.dtsi"
-
-/ {
-	model = "fsl,T2081QDS";
-	compatible = "fsl,T2081QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-};
-
-/include/ "fsl/t2081si-post.dtsi"
diff --git a/src/powerpc/t208xqds.dtsi b/src/powerpc/t208xqds.dtsi
deleted file mode 100644
index 555dc6e03d89..000000000000
--- a/src/powerpc/t208xqds.dtsi
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * T2080/T2081 QDS Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/ {
-	model = "fsl,T2080QDS";
-	compatible = "fsl,T2080QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xff800000 0x00010000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x2 0x0 0x10000>;
-		};
-
-		boardctrl: board-control@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,fpga-qixis";
-			reg = <3 0 0x300>;
-			ranges = <0 3 0 0x300>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "micron,n25q128a11"; /* 16MB */
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-			};
-
-			flash@1 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "sst,sst25wf040";
-				reg = <1>;
-				spi-max-frequency = <35000000>;
-			};
-
-			flash@2 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "eon,en25s64";
-				reg = <2>;
-				spi-max-frequency = <35000000>;
-			};
-		};
-
-		i2c@118000 {
-			pca9547@77 {
-				compatible = "nxp,pca9547";
-				reg = <0x77>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0x0>;
-
-					eeprom@50 {
-						compatible = "at24,24c512";
-						reg = <0x50>;
-					};
-
-					eeprom@51 {
-						compatible = "at24,24c02";
-						reg = <0x51>;
-					};
-
-					eeprom@57 {
-						compatible = "at24,24c02";
-						reg = <0x57>;
-					};
-
-					rtc@68 {
-						compatible = "dallas,ds3232";
-						reg = <0x68>;
-						interrupts = <0x1 0x1 0 0>;
-					};
-				};
-
-				i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0x1>;
-
-					eeprom@55 {
-						compatible = "at24,24c02";
-						reg = <0x55>;
-					};
-				};
-
-				i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0x2>;
-
-					ina220@40 {
-						compatible = "ti,ina220";
-						reg = <0x40>;
-						shunt-resistor = <1000>;
-					};
-
-					ina220@41 {
-						compatible = "ti,ina220";
-						reg = <0x41>;
-						shunt-resistor = <1000>;
-					};
-				};
-			};
-		};
-
-		sdhc@114000 {
-			voltage-ranges = <1800 1800 3300 3300>;
-		};
-	};
-
-	pci0: pcie@ffe240000 {
-		reg = <0xf 0xfe240000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe250000 {
-		reg = <0xf 0xfe250000 0 0x10000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe260000 {
-		reg = <0xf 0xfe260000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci3: pcie@ffe270000 {
-		reg = <0xf 0xfe270000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-};
diff --git a/src/powerpc/t208xrdb.dtsi b/src/powerpc/t208xrdb.dtsi
deleted file mode 100644
index 1481e192e783..000000000000
--- a/src/powerpc/t208xrdb.dtsi
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * T2080PCIe-RDB Board Device Tree Source
- *
- * Copyright 2014 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/ {
-	model = "fsl,T2080RDB";
-	compatible = "fsl,T2080RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xff800000 0x00010000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x2 0x0 0x10000>;
-		};
-
-		boardctrl: board-control@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,t2080-cpld";
-			reg = <3 0 0x300>;
-			ranges = <0 3 0 0x300>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "micron,n25q512a";
-				reg = <0>;
-				spi-max-frequency = <10000000>; /* input clock */
-			};
-		};
-
-		i2c@118000 {
-			adt7481@4c {
-				compatible = "adi,adt7481";
-				reg = <0x4c>;
-			};
-
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
-				interrupts = <0x1 0x1 0 0>;
-			};
-
-			eeprom@50 {
-				compatible = "atmel,24c256";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@118100 {
-			pca9546@77 {
-				compatible = "nxp,pca9546";
-				reg = <0x77>;
-			};
-		};
-
-		sdhc@114000 {
-			voltage-ranges = <1800 1800 3300 3300>;
-		};
-	};
-
-	pci0: pcie@ffe240000 {
-		reg = <0xf 0xfe240000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe250000 {
-		reg = <0xf 0xfe250000 0 0x10000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe260000 {
-		reg = <0xf 0xfe260000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci3: pcie@ffe270000 {
-		reg = <0xf 0xfe270000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-};
diff --git a/src/powerpc/t4240emu.dts b/src/powerpc/t4240emu.dts
deleted file mode 100644
index bc12127a03fb..000000000000
--- a/src/powerpc/t4240emu.dts
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * T4240 emulator Device Tree Source
- *
- * Copyright 2013 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/dts-v1/;
-
-/include/ "fsl/e6500_power_isa.dtsi"
-/ {
-	compatible = "fsl,T4240";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	aliases {
-		ccsr = &soc;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		serial2 = &serial2;
-		serial3 = &serial3;
-		dma0 = &dma0;
-		dma1 = &dma1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: PowerPC,e6500@0 {
-			device_type = "cpu";
-			reg = <0 1>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu1: PowerPC,e6500@2 {
-			device_type = "cpu";
-			reg = <2 3>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu2: PowerPC,e6500@4 {
-			device_type = "cpu";
-			reg = <4 5>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-		cpu3: PowerPC,e6500@6 {
-			device_type = "cpu";
-			reg = <6 7>;
-			next-level-cache = <&L2_1>;
-			fsl,portid-mapping = <0x80000000>;
-		};
-
-		cpu4: PowerPC,e6500@8 {
-			device_type = "cpu";
-			reg = <8 9>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu5: PowerPC,e6500@10 {
-			device_type = "cpu";
-			reg = <10 11>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu6: PowerPC,e6500@12 {
-			device_type = "cpu";
-			reg = <12 13>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-		cpu7: PowerPC,e6500@14 {
-			device_type = "cpu";
-			reg = <14 15>;
-			next-level-cache = <&L2_2>;
-			fsl,portid-mapping = <0x40000000>;
-		};
-
-		cpu8: PowerPC,e6500@16 {
-			device_type = "cpu";
-			reg = <16 17>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu9: PowerPC,e6500@18 {
-			device_type = "cpu";
-			reg = <18 19>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu10: PowerPC,e6500@20 {
-			device_type = "cpu";
-			reg = <20 21>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-		cpu11: PowerPC,e6500@22 {
-			device_type = "cpu";
-			reg = <22 23>;
-			next-level-cache = <&L2_3>;
-			fsl,portid-mapping = <0x20000000>;
-		};
-	};
-};
-
-/ {
-	model = "fsl,T4240QDS";
-	compatible = "fsl,T4240EMU", "fsl,T4240QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xff800000 0x00010000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-
-	};
-};
-
-&ifc {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	compatible = "fsl,ifc", "simple-bus";
-	interrupts = <25 2 0 0>;
-};
-
-&soc {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	device_type = "soc";
-	compatible = "simple-bus";
-
-	soc-sram-error {
-		compatible = "fsl,soc-sram-error";
-		interrupts = <16 2 1 29>;
-	};
-
-	corenet-law@0 {
-		compatible = "fsl,corenet-law";
-		reg = <0x0 0x1000>;
-		fsl,num-laws = <32>;
-	};
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
-
-	ddr2: memory-controller@9000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x9000 0x1000>;
-		interrupts = <16 2 1 22>;
-	};
-
-	ddr3: memory-controller@a000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0xa000 0x1000>;
-		interrupts = <16 2 1 21>;
-	};
-
-	cpc: l3-cache-controller@10000 {
-		compatible = "fsl,t4240-l3-cache-controller", "cache";
-		reg = <0x10000 0x1000
-		       0x11000 0x1000
-		       0x12000 0x1000>;
-		interrupts = <16 2 1 27
-			      16 2 1 26
-			      16 2 1 25>;
-	};
-
-	corenet-cf@18000 {
-		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
-		reg = <0x18000 0x1000>;
-		interrupts = <16 2 1 31>;
-		fsl,ccf-num-csdids = <32>;
-		fsl,ccf-num-snoopids = <32>;
-	};
-
-	iommu@20000 {
-		compatible = "fsl,pamu-v1.0", "fsl,pamu";
-		reg = <0x20000 0x6000>;
-		fsl,portid-mapping = <0x8000>;
-		interrupts = <
-			24 2 0 0
-			16 2 1 30>;
-	};
-
-/include/ "fsl/qoriq-mpic.dtsi"
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		fsl,liodn-bits = <12>;
-	};
-
-	clockgen: global-utilities@e1000 {
-		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
-		reg = <0xe1000 0x1000>;
-	};
-
-/include/ "fsl/qoriq-dma-0.dtsi"
-/include/ "fsl/qoriq-dma-1.dtsi"
-
-/include/ "fsl/qoriq-i2c-0.dtsi"
-/include/ "fsl/qoriq-i2c-1.dtsi"
-/include/ "fsl/qoriq-duart-0.dtsi"
-/include/ "fsl/qoriq-duart-1.dtsi"
-
-	L2_1: l2-cache-controller@c20000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xc20000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-	L2_2: l2-cache-controller@c60000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xc60000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-	L2_3: l2-cache-controller@ca0000 {
-		compatible = "fsl,t4240-l2-cache-controller";
-		reg = <0xca0000 0x40000>;
-		next-level-cache = <&cpc>;
-	};
-};
diff --git a/src/powerpc/t4240qds.dts b/src/powerpc/t4240qds.dts
deleted file mode 100644
index 97683f6a2936..000000000000
--- a/src/powerpc/t4240qds.dts
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * T4240QDS Device Tree Source
- *
- * Copyright 2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/t4240si-pre.dtsi"
-
-/ {
-	model = "fsl,T4240QDS";
-	compatible = "fsl,T4240QDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xff800000 0x00010000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x2 0x0 0x10000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND U-Boot Image";
-				read-only;
-			};
-
-			partition@100000 {
-				/* 1MB for DTB Image */
-				reg = <0x00100000 0x00100000>;
-				label = "NAND DTB Image";
-			};
-
-			partition@200000 {
-				/* 10MB for Linux Kernel Image */
-				reg = <0x00200000 0x00A00000>;
-				label = "NAND Linux Kernel Image";
-			};
-
-			partition@C00000 {
-				/* 500MB for Root file System Image */
-				reg = <0x00c00000 0x1F400000>;
-				label = "NAND RFS Image";
-			};
-		};
-
-		board-control@3,0 {
-			compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis";
-			reg = <3 0 0x300>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "sst,sst25wf040";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-			};
-		};
-
-		i2c@118000 {
-			mux@77 {
-				compatible = "nxp,pca9547";
-				reg = <0x77>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					eeprom@51 {
-						compatible = "at24,24c256";
-						reg = <0x51>;
-					};
-					eeprom@52 {
-						compatible = "at24,24c256";
-						reg = <0x52>;
-					};
-					eeprom@53 {
-						compatible = "at24,24c256";
-						reg = <0x53>;
-					};
-					eeprom@54 {
-						compatible = "at24,24c256";
-						reg = <0x54>;
-					};
-					eeprom@55 {
-						compatible = "at24,24c256";
-						reg = <0x55>;
-					};
-					eeprom@56 {
-						compatible = "at24,24c256";
-						reg = <0x56>;
-					};
-					rtc@68 {
-						compatible = "dallas,ds3232";
-						reg = <0x68>;
-						interrupts = <0x1 0x1 0 0>;
-					};
-				};
-
-				i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0x2>;
-
-					ina220@40 {
-						compatible = "ti,ina220";
-						reg = <0x40>;
-						shunt-resistor = <1000>;
-					};
-
-					ina220@41 {
-						compatible = "ti,ina220";
-						reg = <0x41>;
-						shunt-resistor = <1000>;
-					};
-
-					ina220@44 {
-						compatible = "ti,ina220";
-						reg = <0x44>;
-						shunt-resistor = <1000>;
-					};
-
-					ina220@45 {
-						compatible = "ti,ina220";
-						reg = <0x45>;
-						shunt-resistor = <1000>;
-					};
-
-					ina220@46 {
-						compatible = "ti,ina220";
-						reg = <0x46>;
-						shunt-resistor = <1000>;
-					};
-
-					ina220@47 {
-						compatible = "ti,ina220";
-						reg = <0x47>;
-						shunt-resistor = <1000>;
-					};
-				};
-			};
-		};
-
-		sdhc@114000 {
-			voltage-ranges = <1800 1800 3300 3300>;
-		};
-	};
-
-	pci0: pcie@ffe240000 {
-		reg = <0xf 0xfe240000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe250000 {
-		reg = <0xf 0xfe250000 0 0x10000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe260000 {
-		reg = <0xf 0xfe260000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci3: pcie@ffe270000 {
-		reg = <0xf 0xfe270000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-		port2 {
-			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
-		};
-	};
-};
-
-/include/ "fsl/t4240si-post.dtsi"
diff --git a/src/powerpc/t4240rdb.dts b/src/powerpc/t4240rdb.dts
deleted file mode 100644
index 53761d4e8c51..000000000000
--- a/src/powerpc/t4240rdb.dts
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * T4240RDB Device Tree Source
- *
- * Copyright 2014 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *	 notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *	 notice, this list of conditions and the following disclaimer in the
- *	 documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *	 names of its contributors may be used to endorse or promote products
- *	 derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/t4240si-pre.dtsi"
-
-/ {
-	model = "fsl,T4240RDB";
-	compatible = "fsl,T4240RDB";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	ifc: localbus@ffe124000 {
-		reg = <0xf 0xfe124000 0 0x2000>;
-		ranges = <0 0 0xf 0xe8000000 0x08000000
-			  2 0 0xf 0xff800000 0x00010000
-			  3 0 0xf 0xffdf0000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-
-			bank-width = <2>;
-			device-width = <1>;
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x2 0x0 0x10000>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-	};
-
-	dcsr: dcsr@f00000000 {
-		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
-	};
-
-	soc: soc@ffe000000 {
-		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
-		reg = <0xf 0xfe000000 0 0x00001000>;
-		spi@110000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "sst,sst25wf040";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-			};
-		};
-
-		i2c@118000 {
-			eeprom@52 {
-				compatible = "at24,24c256";
-				reg = <0x52>;
-			};
-			eeprom@54 {
-				compatible = "at24,24c256";
-				reg = <0x54>;
-			};
-			eeprom@56 {
-				compatible = "at24,24c256";
-				reg = <0x56>;
-			};
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-				interrupts = <0x1 0x1 0 0>;
-			};
-		};
-
-		sdhc@114000 {
-			voltage-ranges = <1800 1800 3300 3300>;
-		};
-	};
-
-	pci0: pcie@ffe240000 {
-		reg = <0xf 0xfe240000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci1: pcie@ffe250000 {
-		reg = <0xf 0xfe250000 0 0x10000>;
-		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci2: pcie@ffe260000 {
-		reg = <0xf 0xfe260000 0 0x1000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	pci3: pcie@ffe270000 {
-		reg = <0xf 0xfe270000 0 0x10000>;
-		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
-		pcie@0 {
-			ranges = <0x02000000 0 0xe0000000
-				  0x02000000 0 0xe0000000
-				  0 0x20000000
-
-				  0x01000000 0 0x00000000
-				  0x01000000 0 0x00000000
-				  0 0x00010000>;
-		};
-	};
-
-	rio: rapidio@ffe0c0000 {
-		reg = <0xf 0xfe0c0000 0 0x11000>;
-
-		port1 {
-			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
-		};
-		port2 {
-			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
-		};
-	};
-};
-
-/include/ "fsl/t4240si-post.dtsi"
diff --git a/src/powerpc/taishan.dts b/src/powerpc/taishan.dts
deleted file mode 100644
index 1657ad0bf8a6..000000000000
--- a/src/powerpc/taishan.dts
+++ /dev/null
@@ -1,427 +0,0 @@
-/*
- * Device Tree Source for IBM/AMCC Taishan
- *
- * Copyright 2007 IBM Corp.
- * Hugh Blemings <hugh@au.ibm.com> based off code by
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "amcc,taishan";
-	compatible = "amcc,taishan";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC2;
-		ethernet1 = &EMAC3;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,440GX";
-			reg = <0x00000000>;
-			clock-frequency = <800000000>; // 800MHz
-			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <50>;
-			d-cache-line-size = <50>;
-			i-cache-size = <32768>; /* 32 kB */
-			d-cache-size = <32768>; /* 32 kB */
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
-	};
-
-
-	UICB0: interrupt-controller-base {
-		compatible = "ibm,uic-440gx", "ibm,uic";
-		interrupt-controller;
-		cell-index = <3>;
-		dcr-reg = <0x200 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-440gx", "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
-		interrupt-parent = <&UICB0>;
-
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-440gx", "ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
-		interrupt-parent = <&UICB0>;
-	};
-
-	UIC2: interrupt-controller2 {
-		compatible = "ibm,uic-440gx", "ibm,uic";
-		interrupt-controller;
-		cell-index = <2>; /* was 1 */
-		dcr-reg = <0x210 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
-		interrupt-parent = <&UICB0>;
-	};
-
-
-	CPC0: cpc {
-		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
-		// FIXME: anything else?
-	};
-
-	L2C0: l2c {
-		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
-		dcr-reg = <0x020 0x008			/* Internal SRAM DCR's */
-			   0x030 0x008>;		/* L2 cache DCR's */
-		cache-line-size = <32>;		/* 32 bytes */
-		cache-size = <262144>;		/* L2, 256K */
-		interrupt-parent = <&UIC2>;
-		interrupts = <0x17 0x1>;
-	};
-
-	plb {
-		compatible = "ibm,plb-440gx", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <160000000>; // 160MHz
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-440gp";
-			dcr-reg = <0x010 0x002>;
-			// FIXME: anything else?
-		};
-
-		SRAM0: sram {
-			compatible = "ibm,sram-440gp";
-			dcr-reg = <0x020 0x008 0x00a 0x001>;
-		};
-
-		DMA0: dma {
-			// FIXME: ???
-			compatible = "ibm,dma-440gp";
-			dcr-reg = <0x100 0x027>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <4>;
-			num-rx-chans = <4>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					 /*SERR*/  0x2 &UIC1 0x0 0x4
-					 /*TXDE*/  0x3 &UIC1 0x1 0x4
-					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
-			interrupt-map-mask = <0xffffffff>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-440gx", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/* Wish there was a nicer way of specifying a full 32-bit
-			   range */
-			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
-				  0x80000000 0x00000001 0x80000000 0x80000000>;
-			dcr-reg = <0x090 0x00b>;
-			interrupt-parent = <&UIC1>;
-			interrupts = <0x7 0x4>;
-			clock-frequency = <80000000>; // 80MHz
-
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-440gx", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <80000000>; // 80MHz
-
-				/* ranges property is supplied by zImage
-				 * based on firmware's configuration of the
-				 * EBC bridge */
-
-				interrupts = <0x5 0x4>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "cfi-flash";
-					bank-width = <4>;
-					device-width = <2>;
-					reg = <0x0 0x0 0x4000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x0 0x180000>;
-					};
-					partition@180000 {
-						label = "root";
-						reg = <0x180000 0x200000>;
-					};
-					partition@380000 {
-						label = "user";
-						reg = <0x380000 0x3bc0000>;
-					};
-					partition@3f40000 {
-						label = "env";
-						reg = <0x3f40000 0x80000>;
-					};
-					partition@3fc0000 {
-						label = "u-boot";
-						reg = <0x3fc0000 0x40000>;
-					};
-				};
-			};
-
-
-
-			UART0: serial@40000200 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x40000200 0x00000008>;
-				virtual-reg = <0xe0000200>;
- 				clock-frequency = <11059200>;
-				current-speed = <115200>; /* 115200 */
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			UART1: serial@40000300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0x40000300 0x00000008>;
-				virtual-reg = <0xe0000300>;
-				clock-frequency = <11059200>;
-				current-speed = <115200>; /* 115200 */
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC0: i2c@40000400 {
-				/* FIXME */
-				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <0x40000400 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-			IIC1: i2c@40000500 {
-				/* FIXME */
-				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <0x40000500 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x3 0x4>;
-			};
-
-			GPIO0: gpio@40000700 {
-				/* FIXME */
-				compatible = "ibm,gpio-440gp";
-				reg = <0x40000700 0x00000020>;
-			};
-
-			ZMII0: emac-zmii@40000780 {
-				compatible = "ibm,zmii-440gx", "ibm,zmii";
-				reg = <0x40000780 0x0000000c>;
-			};
-
-			RGMII0: emac-rgmii@40000790 {
-				compatible = "ibm,rgmii";
-				reg = <0x40000790 0x00000008>;
-			};
-
-			TAH0: emac-tah@40000b50 {
-				compatible = "ibm,tah-440gx", "ibm,tah";
-				reg = <0x40000b50 0x00000030>;
-			};
-
-			TAH1: emac-tah@40000d50 {
-				compatible = "ibm,tah-440gx", "ibm,tah";
-				reg = <0x40000d50 0x00000030>;
-			};
-
-			EMAC0: ethernet@40000800 {
-				unused = <0x1>;
-				device_type = "network";
-				compatible = "ibm,emac-440gx", "ibm,emac4";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1c 0x4 0x1d 0x4>;
-				reg = <0x40000800 0x00000074>;
-				local-mac-address = [000000000000]; // Filled in by zImage
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000001>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <0>;
-			};
-		 	EMAC1: ethernet@40000900 {
-				unused = <0x1>;
-				device_type = "network";
-				compatible = "ibm,emac-440gx", "ibm,emac4";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1e 0x4 0x1f 0x4>;
-				reg = <0x40000900 0x00000074>;
-				local-mac-address = [000000000000]; // Filled in by zImage
-				mal-device = <&MAL0>;
-				mal-tx-channel = <1>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000001>;
- 				zmii-device = <&ZMII0>;
-				zmii-channel = <1>;
-			};
-
-		 	EMAC2: ethernet@40000c00 {
-				device_type = "network";
-				compatible = "ibm,emac-440gx", "ibm,emac4";
-				interrupt-parent = <&UIC2>;
-				interrupts = <0x0 0x4 0x1 0x4>;
-				reg = <0x40000c00 0x00000074>;
-				local-mac-address = [000000000000]; // Filled in by zImage
-				mal-device = <&MAL0>;
-				mal-tx-channel = <2>;
-				mal-rx-channel = <2>;
-				cell-index = <2>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-address = <1>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <0>;
- 				zmii-device = <&ZMII0>;
-				zmii-channel = <2>;
-				tah-device = <&TAH0>;
-				tah-channel = <0>;
-			};
-
-		 	EMAC3: ethernet@40000e00 {
-				device_type = "network";
-				compatible = "ibm,emac-440gx", "ibm,emac4";
-				interrupt-parent = <&UIC2>;
-				interrupts = <0x2 0x4 0x3 0x4>;
-				reg = <0x40000e00 0x00000074>;
-				local-mac-address = [000000000000]; // Filled in by zImage
-				mal-device = <&MAL0>;
-				mal-tx-channel = <3>;
-				mal-rx-channel = <3>;
-				cell-index = <3>;
-				max-frame-size = <9000>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rgmii";
-				phy-address = <3>;
-				rgmii-device = <&RGMII0>;
-				rgmii-channel = <1>;
- 				zmii-device = <&ZMII0>;
-				zmii-channel = <3>;
-				tah-device = <&TAH1>;
-				tah-channel = <0>;
-			};
-
-
-			GPT0: gpt@40000a00 {
-				/* FIXME */
-				reg = <0x40000a00 0x000000d4>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
-			};
-
-		};
-
-		PCIX0: pci@20ec00000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
-			primary;
-			large-inbound-windows;
-			enable-msi-hole;
-			reg = <0x00000002 0x0ec00000   0x00000008	/* Config space access */
-			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
-			       0x00000002 0x0ed00000   0x00000004   /* Special cycles */
-			       0x00000002 0x0ec80000 0x00000100	/* Internal registers */
-			       0x00000002 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
-				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* IDSEL 1 */
-				0x800 0x0 0x0 0x1 &UIC0 0x17 0x8
-				0x800 0x0 0x0 0x2 &UIC0 0x18 0x8
-				0x800 0x0 0x0 0x3 &UIC0 0x19 0x8
-				0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8
-
-				/* IDSEL 2 */
-				0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
-				0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
-				0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
-				0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
-			>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@40000300";
-	};
-};
diff --git a/src/powerpc/tqm5200.dts b/src/powerpc/tqm5200.dts
deleted file mode 100644
index 1db07f6cf133..000000000000
--- a/src/powerpc/tqm5200.dts
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * TQM5200 board Device Tree Source
- *
- * Copyright (C) 2007 Semihalf
- * Marian Balakowicz <m8@semihalf.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "tqc,tqm5200";
-	compatible = "tqc,tqm5200";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
-
-	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
-		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
-			fsl,has-wdt;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
-		};
-
-		serial@2000 {		// PSC1
-			compatible = "fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
-		};
-
-		serial@2200 {		// PSC2
-			compatible = "fsl,mpc5200-psc-uart";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
-		};
-
-		serial@2400 {		// PSC3
-			compatible = "fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
-		};
-
-		ethernet@3000 {
-			compatible = "fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
-
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		ata@3a00 {
-			compatible = "fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
-
-			 rtc@68 {
-				compatible = "dallas,ds1307";
-				reg = <0x68>;
-			};
-		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
-	};
-
-	localbus {
-		compatible = "fsl,mpc5200-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xfc000000 0x02000000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-		};
-	};
-
-	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
-				 0xc000 0 0 2 &mpc5200_pic 0 0 3
-				 0xc000 0 0 3 &mpc5200_pic 0 0 3
-				 0xc000 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
-		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
-	};
-};
diff --git a/src/powerpc/tqm8540.dts b/src/powerpc/tqm8540.dts
deleted file mode 100644
index 91cbd7acd276..000000000000
--- a/src/powerpc/tqm8540.dts
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * TQM 8540 Device Tree Source
- *
- * Copyright 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "tqc,tqm8540";
-	compatible = "tqc,tqm8540";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8540@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-		compatible = "fsl,mpc8540-immr", "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8540-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8540-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			dtt@48 {
-				compatible = "national,lm75";
-				reg = <0x48>;
-			};
-
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy2>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "FEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <41 2>;
-			interrupt-parent = <&mpic>;
-			phy-handle = <&phy3>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>; 	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			device_type = "open-pic";
-			compatible = "chrp,open-pic";
-		};
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8540-localbus", "fsl,pq3-localbus",
-			     "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
-
-		ranges = <0x0 0x0 0xfe000000 0x02000000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x02000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			partition@0 {
-				label = "kernel";
-				reg = <0x00000000 0x00180000>;
-			};
-			partition@180000 {
-				label = "root";
-				reg = <0x00180000 0x01dc0000>;
-			};
-			partition@1f40000 {
-				label = "env1";
-				reg = <0x01f40000 0x00040000>;
-			};
-			partition@1f80000 {
-				label = "env2";
-				reg = <0x01f80000 0x00040000>;
-			};
-			partition@1fc0000 {
-				label = "u-boot";
-				reg = <0x01fc0000 0x00040000>;
-				read-only;
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xe0008000 0x1000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 28 */
-				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1
-				 0xe000 0 0 3 &mpic 6 1
-				 0xe000 0 0 4 &mpic 5 1
-
-				/* IDSEL 11 */
-				 0x5800 0 0 1 &mpic 6 1
-				 0x5800 0 0 2 &mpic 5 1
-				 >;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
-	};
-};
diff --git a/src/powerpc/tqm8541.dts b/src/powerpc/tqm8541.dts
deleted file mode 100644
index 84dce2d5fc48..000000000000
--- a/src/powerpc/tqm8541.dts
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * TQM 8541 Device Tree Source
- *
- * Copyright 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "tqc,tqm8541";
-	compatible = "tqc,tqm8541";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8541@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-		compatible = "fsl,mpc8541-immr", "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8541-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8540-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8540-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			dtt@48 {
-				compatible = "national,lm75";
-				reg = <0x48>;
-			};
-
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8541-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>; 	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			device_type = "open-pic";
-			compatible = "chrp,open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8541-cpm", "fsl,cpm2", "simple-bus";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0 0x2000 0x9000 0x1000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8541-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-				clock-frequency = <0>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xe0008000 0x1000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 28 */
-				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1
-				 0xe000 0 0 3 &mpic 6 1
-				 0xe000 0 0 4 &mpic 5 1
-
-				/* IDSEL 11 */
-				 0x5800 0 0 1 &mpic 6 1
-				 0x5800 0 0 2 &mpic 5 1
-				 >;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
-	};
-};
diff --git a/src/powerpc/tqm8548-bigflash.dts b/src/powerpc/tqm8548-bigflash.dts
deleted file mode 100644
index 7a333dd02d9c..000000000000
--- a/src/powerpc/tqm8548-bigflash.dts
+++ /dev/null
@@ -1,499 +0,0 @@
-/*
- * TQM8548 Device Tree Source
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "tqc,tqm8548";
-	compatible = "tqc,tqm8548";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8548@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
-	};
-
-	soc@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xa0000000 0x100000>;
-		bus-frequency = <0>;
-		compatible = "fsl,mpc8548-immr", "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8548-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8548-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			dtt@48 {
-				compatible = "national,lm75";
-				reg = <0x48>;
-			};
-
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy1: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <3>;
-				};
-				phy4: ethernet-phy@4 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <4>;
-				};
-				phy5: ethernet-phy@5 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <5>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy4>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy5>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;	// reg base, size
-			clock-frequency = <0>;	// should we fill in in uboot?
-			current-speed = <115200>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>;	// should we fill in in uboot?
-			current-speed = <115200>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	// global utilities reg
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-	};
-
-	localbus@a0005000 {
-		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
-			     "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xa0005000 0x100>;	// BRx, ORx, etc.
-		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
-
-		ranges = <
-			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
-			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
-			2 0x0 0xa3000000 0x00008000	// CAN (2 x CC770)
-			3 0x0 0xa3010000 0x00008000	// NAND FLASH
-
-		>;
-
-		flash@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <1 0x0 0x8000000>;
-			bank-width = <4>;
-			device-width = <1>;
-
-			partition@0 {
-				label = "kernel";
-				reg = <0x00000000 0x00200000>;
-			};
-			partition@200000 {
-				label = "root";
-				reg = <0x00200000 0x00300000>;
-			};
-			partition@500000 {
-				label = "user";
-				reg = <0x00500000 0x07a00000>;
-			};
-			partition@7f00000 {
-				label = "env1";
-				reg = <0x07f00000 0x00040000>;
-			};
-			partition@7f40000 {
-				label = "env2";
-				reg = <0x07f40000 0x00040000>;
-			};
-			partition@7f80000 {
-				label = "u-boot";
-				reg = <0x07f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		/* Note: CAN support needs be enabled in U-Boot */
-		can@2,0 {
-			compatible = "bosch,cc770"; // Bosch CC770
-			reg = <2 0x0 0x100>;
-			interrupts = <4 1>;
-			interrupt-parent = <&mpic>;
-			bosch,external-clock-frequency = <16000000>;
-			bosch,disconnect-rx1-input;
-			bosch,disconnect-tx1-output;
-			bosch,iso-low-speed-mux;
-			bosch,clock-out-frequency = <16000000>;
-		};
-
-		can@2,100 {
-			compatible = "bosch,cc770"; // Bosch CC770
-			reg = <2 0x100 0x100>;
-			interrupts = <4 1>;
-			interrupt-parent = <&mpic>;
-			bosch,external-clock-frequency = <16000000>;
-			bosch,disconnect-rx1-input;
-			bosch,disconnect-tx1-output;
-			bosch,iso-low-speed-mux;
-		};
-
-		/* Note: NAND support needs to be enabled in U-Boot */
-		upm@3,0 {
-			#address-cells = <0>;
-			#size-cells = <0>;
-			compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand";
-			reg = <3 0x0 0x800>;
-			fsl,upm-addr-offset = <0x10>;
-			fsl,upm-cmd-offset = <0x08>;
-			/* Micron MT29F8G08FAB multi-chip device */
-			fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
-			fsl,upm-wait-flags = <0x5>;
-			chip-delay = <25>; // in micro-seconds
-
-			nand@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					    label = "fs";
-					    reg = <0x00000000 0x10000000>;
-				};
-			};
-		};
-	};
-
-	pci0: pci@a0008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xa0008000 0x1000>;
-		clock-frequency = <33333333>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 28 */
-				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1
-				 0xe000 0 0 3 &mpic 6 1
-				 0xe000 0 0 4 &mpic 5 1
-
-				/* IDSEL 11 */
-				 0x5800 0 0 1 &mpic 6 1
-				 0x5800 0 0 2 &mpic 5 1
-				 >;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xa2000000 0 0x01000000>;
-	};
-
-	pci1: pcie@a000a000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 (PEX) */
-			0x00000 0 0 1 &mpic 0 1
-			0x00000 0 0 2 &mpic 1 1
-			0x00000 0 0 3 &mpic 2 1
-			0x00000 0 0 4 &mpic 3 1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0xb0000000 0xb0000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xaf000000 0 0x08000000>;
-		clock-frequency = <33333333>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xa000a000 0x1000>;
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0 0xb0000000 0x02000000 0
-			          0xb0000000 0 0x10000000
-				  0x01000000 0 0x00000000 0x01000000 0
-				  0x00000000 0 0x08000000>;
-		};
-	};
-};
diff --git a/src/powerpc/tqm8548.dts b/src/powerpc/tqm8548.dts
deleted file mode 100644
index c737caff10c7..000000000000
--- a/src/powerpc/tqm8548.dts
+++ /dev/null
@@ -1,499 +0,0 @@
-/*
- * TQM8548 Device Tree Source
- *
- * Copyright 2006 Freescale Semiconductor Inc.
- * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "tqc,tqm8548";
-	compatible = "tqc,tqm8548";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8548@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-		compatible = "fsl,mpc8548-immr", "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8548-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8548-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			dtt@48 {
-				compatible = "national,lm75";
-				reg = <0x48>;
-			};
-
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy1: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <3>;
-				};
-				phy4: ethernet-phy@4 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <4>;
-				};
-				phy5: ethernet-phy@5 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <5>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy4>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy5>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;	// reg base, size
-			clock-frequency = <0>;	// should we fill in in uboot?
-			current-speed = <115200>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>;	// should we fill in in uboot?
-			current-speed = <115200>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	// global utilities reg
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-	};
-
-	localbus@e0005000 {
-		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
-			     "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
-		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
-
-		ranges = <
-			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
-			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
-			2 0x0 0xe3000000 0x00008000	// CAN (2 x CC770)
-			3 0x0 0xe3010000 0x00008000	// NAND FLASH
-
-		>;
-
-		flash@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <1 0x0 0x8000000>;
-			bank-width = <4>;
-			device-width = <1>;
-
-			partition@0 {
-				label = "kernel";
-				reg = <0x00000000 0x00200000>;
-			};
-			partition@200000 {
-				label = "root";
-				reg = <0x00200000 0x00300000>;
-			};
-			partition@500000 {
-				label = "user";
-				reg = <0x00500000 0x07a00000>;
-			};
-			partition@7f00000 {
-				label = "env1";
-				reg = <0x07f00000 0x00040000>;
-			};
-			partition@7f40000 {
-				label = "env2";
-				reg = <0x07f40000 0x00040000>;
-			};
-			partition@7f80000 {
-				label = "u-boot";
-				reg = <0x07f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		/* Note: CAN support needs be enabled in U-Boot */
-		can@2,0 {
-			compatible = "bosch,cc770"; // Bosch CC770
-			reg = <2 0x0 0x100>;
-			interrupts = <4 1>;
-			interrupt-parent = <&mpic>;
-			bosch,external-clock-frequency = <16000000>;
-			bosch,disconnect-rx1-input;
-			bosch,disconnect-tx1-output;
-			bosch,iso-low-speed-mux;
-			bosch,clock-out-frequency = <16000000>;
-		};
-
-		can@2,100 {
-			compatible = "bosch,cc770"; // Bosch CC770
-			reg = <2 0x100 0x100>;
-			interrupts = <4 1>;
-			interrupt-parent = <&mpic>;
-			bosch,external-clock-frequency = <16000000>;
-			bosch,disconnect-rx1-input;
-			bosch,disconnect-tx1-output;
-			bosch,iso-low-speed-mux;
-		};
-
-		/* Note: NAND support needs to be enabled in U-Boot */
-		upm@3,0 {
-			#address-cells = <0>;
-			#size-cells = <0>;
-			compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand";
-			reg = <3 0x0 0x800>;
-			fsl,upm-addr-offset = <0x10>;
-			fsl,upm-cmd-offset = <0x08>;
-			/* Micron MT29F8G08FAB multi-chip device */
-			fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
-			fsl,upm-wait-flags = <0x5>;
-			chip-delay = <25>; // in micro-seconds
-
-			nand@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					    label = "fs";
-					    reg = <0x00000000 0x10000000>;
-				};
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xe0008000 0x1000>;
-		clock-frequency = <33333333>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 28 */
-				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1
-				 0xe000 0 0 3 &mpic 6 1
-				 0xe000 0 0 4 &mpic 5 1
-
-				/* IDSEL 11 */
-				 0x5800 0 0 1 &mpic 6 1
-				 0x5800 0 0 2 &mpic 5 1
-				 >;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
-	};
-
-	pci1: pcie@e000a000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 (PEX) */
-			0x00000 0 0 1 &mpic 0 1
-			0x00000 0 0 2 &mpic 1 1
-			0x00000 0 0 3 &mpic 2 1
-			0x00000 0 0 4 &mpic 3 1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xef000000 0 0x08000000>;
-		clock-frequency = <33333333>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe000a000 0x1000>;
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0 0xc0000000 0x02000000 0
-			          0xc0000000 0 0x20000000
-				  0x01000000 0 0x00000000 0x01000000 0
-				  0x00000000 0 0x08000000>;
-		};
-	};
-};
diff --git a/src/powerpc/tqm8555.dts b/src/powerpc/tqm8555.dts
deleted file mode 100644
index d0416a5cdddf..000000000000
--- a/src/powerpc/tqm8555.dts
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * TQM 8555 Device Tree Source
- *
- * Copyright 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "tqc,tqm8555";
-	compatible = "tqc,tqm8555";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8555@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-		compatible = "fsl,mpc8555-immr", "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8540-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8540-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			dtt@48 {
-				compatible = "national,lm75";
-				reg = <0x48>;
-			};
-
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8555-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>; 	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			device_type = "open-pic";
-			compatible = "chrp,open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8555-cpm", "fsl,cpm2", "simple-bus";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0 0x2000 0x9000 0x1000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8555-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-				clock-frequency = <0>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xe0008000 0x1000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 28 */
-				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1
-				 0xe000 0 0 3 &mpic 6 1
-				 0xe000 0 0 4 &mpic 5 1
-
-				/* IDSEL 11 */
-				 0x5800 0 0 1 &mpic 6 1
-				 0x5800 0 0 2 &mpic 5 1
-				 >;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
-	};
-};
diff --git a/src/powerpc/tqm8560.dts b/src/powerpc/tqm8560.dts
deleted file mode 100644
index f9a11ebf736c..000000000000
--- a/src/powerpc/tqm8560.dts
+++ /dev/null
@@ -1,399 +0,0 @@
-/*
- * TQM 8560 Device Tree Source
- *
- * Copyright 2008 Freescale Semiconductor Inc.
- * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "tqc,tqm8560";
-	compatible = "tqc,tqm8560";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8560@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	soc@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-		compatible = "fsl,mpc8560-immr", "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8540-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8540-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			dtt@48 {
-				compatible = "national,lm75";
-				reg = <0x48>;
-			};
-
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy2>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			device_type = "open-pic";
-			compatible = "chrp,open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0 0x4000 0x9000 0x2000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8560-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-				clock-frequency = <0>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
-			};
-
-			serial0: serial@91a00 {
-				device_type = "serial";
-				compatible = "fsl,mpc8560-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x91a00 0x20 0x88000 0x100>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x800000>;
-				current-speed = <115200>;
-				interrupts = <40 8>;
-				interrupt-parent = <&cpmpic>;
-			};
-
-			serial1: serial@91a20 {
-				device_type = "serial";
-				compatible = "fsl,mpc8560-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x91a20 0x20 0x88100 0x100>;
-				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0x4a00000>;
-				current-speed = <115200>;
-				interrupts = <41 8>;
-				interrupt-parent = <&cpmpic>;
-			};
-
-			enet2: ethernet@91340 {
-				device_type = "network";
-				compatible = "fsl,mpc8560-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <0x1a400300>;
-				interrupts = <34 8>;
-				interrupt-parent = <&cpmpic>;
-				phy-handle = <&phy3>;
-			};
-		};
-	};
-
-	localbus@e0005000 {
-		compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus",
-			     "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
-		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
-
-		ranges = <
-			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
-			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
-			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
-		>;
-
-		flash@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <1 0x0 0x8000000>;
-			bank-width = <4>;
-			device-width = <1>;
-
-			partition@0 {
-				label = "kernel";
-				reg = <0x00000000 0x00200000>;
-			};
-			partition@200000 {
-				label = "root";
-				reg = <0x00200000 0x00300000>;
-			};
-			partition@500000 {
-				label = "user";
-				reg = <0x00500000 0x07a00000>;
-			};
-			partition@7f00000 {
-				label = "env1";
-				reg = <0x07f00000 0x00040000>;
-			};
-			partition@7f40000 {
-				label = "env2";
-				reg = <0x07f40000 0x00040000>;
-			};
-			partition@7f80000 {
-				label = "u-boot";
-				reg = <0x07f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		/* Note: CAN support needs be enabled in U-Boot */
-		can0@2,0 {
-			compatible = "intel,82527"; // Bosch CC770
-			reg = <2 0x0 0x100>;
-			interrupts = <4 1>;
-			interrupt-parent = <&mpic>;
-		};
-
-		can1@2,100 {
-			compatible = "intel,82527"; // Bosch CC770
-			reg = <2 0x100 0x100>;
-			interrupts = <4 1>;
-			interrupt-parent = <&mpic>;
-		};
-	};
-
-	pci0: pci@e0008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xe0008000 0x1000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL 28 */
-				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1
-				 0xe000 0 0 3 &mpic 6 1
-				 0xe000 0 0 4 &mpic 5 1
-
-				/* IDSEL 11 */
-				 0x5800 0 0 1 &mpic 6 1
-				 0x5800 0 0 2 &mpic 5 1
-				 >;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
-	};
-};
diff --git a/src/powerpc/tqm8xx.dts b/src/powerpc/tqm8xx.dts
deleted file mode 100644
index 3d1446b99c7e..000000000000
--- a/src/powerpc/tqm8xx.dts
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * TQM8XX Device Tree Source
- *
- * Heiko Schocher <hs@denx.de>
- * 2010 DENX Software Engineering GmbH
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "TQM8xx";
-	compatible = "tqc,tqm8xx";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-		mdio1 = &phy1;
-		serial0 = &smc1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,860@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <16>;	// 16 bytes
-			i-cache-line-size = <16>;	// 16 bytes
-			d-cache-size = <0x1000>;		// L1, 4K
-			i-cache-size = <0x1000>;		// L1, 4K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			interrupts = <15 2>;	// decrementer interrupt
-			interrupt-parent = <&PIC>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
-	localbus@fff00100 {
-		compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xfff00100 0x40>;
-
-		ranges = <
-			0x0 0x0 0x40000000 0x800000
-			0x3 0x0 0xc0000000 0x200
-		>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			bank-width = <4>;
-			device-width = <2>;
-		};
-
-		/* Note: CAN support needs be enabled in U-Boot */
-		can@3,0 {
-			compatible = "intc,82527";
-			reg = <3 0x0 0x80>;
-			interrupts = <8 1>;
-			interrupt-parent = <&PIC>;
-			bosch,external-clock-frequency = <16000000>;
-			bosch,disconnect-rx1-input;
-			bosch,disconnect-tx1-output;
-			bosch,iso-low-speed-mux;
-			bosch,clock-out-frequency = <16000000>;
-		};
-
-		can@3,100 {
-			compatible = "intc,82527";
-			reg = <3 0x100 0x80>;
-			interrupts = <8 1>;
-			interrupt-parent = <&PIC>;
-			bosch,external-clock-frequency = <16000000>;
-			bosch,disconnect-rx1-input;
-			bosch,disconnect-tx1-output;
-			bosch,iso-low-speed-mux;
-		};
-	};
-
-	soc@fff00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xfff00000 0x00004000>;
-
-		phy1: mdio@e00 {
-			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <0xe00 0x188>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			PHY: ethernet-phy@f {
-				reg = <0xf>;
-			};
-		};
-
-		eth1: ethernet@e00 {
-			device_type = "network";
-			compatible = "fsl,mpc866-fec-enet",
-			             "fsl,pq1-fec-enet";
-			reg = <0xe00 0x188>;
-			interrupts = <3 1>;
-			interrupt-parent = <&PIC>;
-			phy-handle = <&PHY>;
-			linux,network-index = <1>;
-		};
-
-		PIC: pic@0 {
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x0 0x24>;
-			compatible = "fsl,mpc860-pic", "fsl,pq1-pic";
-		};
-
-		cpm@9c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc860-cpm", "fsl,cpm1";
-			ranges;
-			reg = <0x9c0 0x40>;
-			brg-frequency = <0>;
-			interrupts = <0 2>;	// cpm error interrupt
-			interrupt-parent = <&CPM_PIC>;
-
-			muram@2000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x2000 0x2000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x2000>;
-				};
-			};
-
-			brg@9f0 {
-				compatible = "fsl,mpc860-brg",
-					     "fsl,cpm1-brg",
-					     "fsl,cpm-brg";
-				reg = <0x9f0 0x10>;
-				clock-frequency = <0>;
-			};
-
-			CPM_PIC: pic@930 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-				interrupts = <5 2 0 2>;
-				interrupt-parent = <&PIC>;
-				reg = <0x930 0x20>;
-				compatible = "fsl,mpc860-cpm-pic",
-				             "fsl,cpm1-pic";
-			};
-
-
-			smc1: serial@a80 {
-				device_type = "serial";
-				compatible = "fsl,mpc860-smc-uart",
-				             "fsl,cpm1-smc-uart";
-				reg = <0xa80 0x10 0x3e80 0x40>;
-				interrupts = <4>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x90>;
-			};
-
-			eth0: ethernet@a00 {
-				device_type = "network";
-				compatible = "fsl,mpc860-scc-enet",
-				             "fsl,cpm1-scc-enet";
-				reg = <0xa00 0x18 0x3c00 0x100>;
-				interrupts = <30>;
-				interrupt-parent = <&CPM_PIC>;
-				fsl,cpm-command = <0000>;
-				linux,network-index = <0>;
-				fixed-link = <0 0 10 0 0>;
-			};
-		};
-	};
-};
diff --git a/src/powerpc/uc101.dts b/src/powerpc/uc101.dts
deleted file mode 100644
index 5c462194ef06..000000000000
--- a/src/powerpc/uc101.dts
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Manroland uc101 board Device Tree Source
- *
- * Copyright (C) 2009 DENX Software Engineering GmbH
- * Heiko Schocher <hs@denx.de>
- * Copyright 2006-2007 Secret Lab Technologies Ltd.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "mpc5200b.dtsi"
-
-&gpt0 { gpio-controller; };
-&gpt1 { gpio-controller; };
-&gpt2 { gpio-controller; };
-&gpt3 { gpio-controller; };
-&gpt4 { gpio-controller; };
-&gpt5 { gpio-controller; };
-&gpt6 { gpio-controller; };
-&gpt7 { gpio-controller; };
-
-/ {
-	model = "manroland,uc101";
-	compatible = "manroland,uc101";
-
-	soc5200@f0000000 {
-		rtc@800 {
-			status = "disabled";
-		};
-
-		can@900 {
-			status = "disabled";
-		};
-
-		can@980 {
-			status = "disabled";
-		};
-
-		spi@f00 {
-			status = "disabled";
-		};
-
-		usb@1000 {
-			status = "disabled";
-		};
-
-		psc@2000 {	// PSC1
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2200 {	// PSC2
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		psc@2400 {	// PSC3
-			status = "disabled";
-		};
-
-		psc@2600 {	// PSC4
-			status = "disabled";
-		};
-
-		psc@2800 {	// PSC5
-			status = "disabled";
-		};
-
-		psc@2c00 {	// PSC6
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		};
-
-		ethernet@3000 {
-			phy-handle = <&phy0>;
-		};
-
-		mdio@3000 {
-			phy0: ethernet-phy@0 {
-				compatible = "intel,lxt971";
-				reg = <0>;
-			};
-		};
-
-		i2c@3d00 {
-			status = "disabled";
-		};
-
-		i2c@3d40 {
-			fsl,preserve-clocking;
-			clock-frequency = <400000>;
-
-			hwmon@2c {
-				compatible = "ad,adm9240";
-				reg = <0x2c>;
-			};
-			rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-	};
-
-	pci@f0000d00 {
-		status = "disabled";
-	};
-
-	localbus {
-		ranges = <0 0 0xff800000 0x00800000
-			  1 0 0x80000000 0x00800000
-			  3 0 0x80000000 0x00800000>;
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x00800000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
-
-			partition@0 {
-				label = "DTS";
-				reg = <0x0 0x00100000>;
-			};
-			partition@100000 {
-				label = "Kernel";
-				reg = <0x100000 0x00200000>;
-			};
-			partition@300000 {
-				label = "RootFS";
-				reg = <0x00300000 0x00200000>;
-			};
-			partition@500000 {
-				label = "user";
-				reg = <0x00500000 0x00200000>;
-			};
-			partition@700000 {
-				label = "U-Boot";
-				reg = <0x00700000 0x00040000>;
-			};
-			partition@740000 {
-				label = "Env";
-				reg = <0x00740000 0x00010000>;
-			};
-			partition@750000 {
-				label = "red. Env";
-				reg = <0x00750000 0x00010000>;
-			};
-			partition@760000 {
-				label = "reserve";
-				reg = <0x00760000 0x000a0000>;
-			};
-		};
-
-	};
-};
diff --git a/src/powerpc/virtex440-ml507.dts b/src/powerpc/virtex440-ml507.dts
deleted file mode 100644
index 391a4e299783..000000000000
--- a/src/powerpc/virtex440-ml507.dts
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- * This file supports the Xilinx ML507 board with the 440 processor.
- * A reference design for the FPGA is provided at http://git.xilinx.com.
- *
- * (C) Copyright 2008 Xilinx, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- * ---
- *
- * Device Tree Generator version: 1.1
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
- *
- * XPS project directory: ml507_ppc440_emb_ref
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "xlnx,virtex440";
-	dcr-parent = <&ppc440_0>;
-	model = "testing";
-	DDR2_SDRAM: memory@0 {
-		device_type = "memory";
-		reg = < 0 0x10000000 >;
-	} ;
-	chosen {
-		bootargs = "console=ttyS0 root=/dev/ram";
-		linux,stdout-path = &RS232_Uart_1;
-	} ;
-	cpus {
-		#address-cells = <1>;
-		#cpus = <1>;
-		#size-cells = <0>;
-		ppc440_0: cpu@0 {
-			clock-frequency = <400000000>;
-			compatible = "PowerPC,440", "ibm,ppc440";
-			d-cache-line-size = <0x20>;
-			d-cache-size = <0x8000>;
-			dcr-access-method = "native";
-			dcr-controller ;
-			device_type = "cpu";
-			i-cache-line-size = <0x20>;
-			i-cache-size = <0x8000>;
-			model = "PowerPC,440";
-			reg = <0>;
-			timebase-frequency = <400000000>;
-			xlnx,apu-control = <1>;
-			xlnx,apu-udi-0 = <0>;
-			xlnx,apu-udi-1 = <0>;
-			xlnx,apu-udi-10 = <0>;
-			xlnx,apu-udi-11 = <0>;
-			xlnx,apu-udi-12 = <0>;
-			xlnx,apu-udi-13 = <0>;
-			xlnx,apu-udi-14 = <0>;
-			xlnx,apu-udi-15 = <0>;
-			xlnx,apu-udi-2 = <0>;
-			xlnx,apu-udi-3 = <0>;
-			xlnx,apu-udi-4 = <0>;
-			xlnx,apu-udi-5 = <0>;
-			xlnx,apu-udi-6 = <0>;
-			xlnx,apu-udi-7 = <0>;
-			xlnx,apu-udi-8 = <0>;
-			xlnx,apu-udi-9 = <0>;
-			xlnx,dcr-autolock-enable = <1>;
-			xlnx,dcu-rd-ld-cache-plb-prio = <0>;
-			xlnx,dcu-rd-noncache-plb-prio = <0>;
-			xlnx,dcu-rd-touch-plb-prio = <0>;
-			xlnx,dcu-rd-urgent-plb-prio = <0>;
-			xlnx,dcu-wr-flush-plb-prio = <0>;
-			xlnx,dcu-wr-store-plb-prio = <0>;
-			xlnx,dcu-wr-urgent-plb-prio = <0>;
-			xlnx,dma0-control = <0>;
-			xlnx,dma0-plb-prio = <0>;
-			xlnx,dma0-rxchannelctrl = <0x1010000>;
-			xlnx,dma0-rxirqtimer = <0x3ff>;
-			xlnx,dma0-txchannelctrl = <0x1010000>;
-			xlnx,dma0-txirqtimer = <0x3ff>;
-			xlnx,dma1-control = <0>;
-			xlnx,dma1-plb-prio = <0>;
-			xlnx,dma1-rxchannelctrl = <0x1010000>;
-			xlnx,dma1-rxirqtimer = <0x3ff>;
-			xlnx,dma1-txchannelctrl = <0x1010000>;
-			xlnx,dma1-txirqtimer = <0x3ff>;
-			xlnx,dma2-control = <0>;
-			xlnx,dma2-plb-prio = <0>;
-			xlnx,dma2-rxchannelctrl = <0x1010000>;
-			xlnx,dma2-rxirqtimer = <0x3ff>;
-			xlnx,dma2-txchannelctrl = <0x1010000>;
-			xlnx,dma2-txirqtimer = <0x3ff>;
-			xlnx,dma3-control = <0>;
-			xlnx,dma3-plb-prio = <0>;
-			xlnx,dma3-rxchannelctrl = <0x1010000>;
-			xlnx,dma3-rxirqtimer = <0x3ff>;
-			xlnx,dma3-txchannelctrl = <0x1010000>;
-			xlnx,dma3-txirqtimer = <0x3ff>;
-			xlnx,endian-reset = <0>;
-			xlnx,generate-plb-timespecs = <1>;
-			xlnx,icu-rd-fetch-plb-prio = <0>;
-			xlnx,icu-rd-spec-plb-prio = <0>;
-			xlnx,icu-rd-touch-plb-prio = <0>;
-			xlnx,interconnect-imask = <0xffffffff>;
-			xlnx,mplb-allow-lock-xfer = <1>;
-			xlnx,mplb-arb-mode = <0>;
-			xlnx,mplb-awidth = <0x20>;
-			xlnx,mplb-counter = <0x500>;
-			xlnx,mplb-dwidth = <0x80>;
-			xlnx,mplb-max-burst = <8>;
-			xlnx,mplb-native-dwidth = <0x80>;
-			xlnx,mplb-p2p = <0>;
-			xlnx,mplb-prio-dcur = <2>;
-			xlnx,mplb-prio-dcuw = <3>;
-			xlnx,mplb-prio-icu = <4>;
-			xlnx,mplb-prio-splb0 = <1>;
-			xlnx,mplb-prio-splb1 = <0>;
-			xlnx,mplb-read-pipe-enable = <1>;
-			xlnx,mplb-sync-tattribute = <0>;
-			xlnx,mplb-wdog-enable = <1>;
-			xlnx,mplb-write-pipe-enable = <1>;
-			xlnx,mplb-write-post-enable = <1>;
-			xlnx,num-dma = <1>;
-			xlnx,pir = <0xf>;
-			xlnx,ppc440mc-addr-base = <0>;
-			xlnx,ppc440mc-addr-high = <0xfffffff>;
-			xlnx,ppc440mc-arb-mode = <0>;
-			xlnx,ppc440mc-bank-conflict-mask = <0xc00000>;
-			xlnx,ppc440mc-control = <0xf810008f>;
-			xlnx,ppc440mc-max-burst = <8>;
-			xlnx,ppc440mc-prio-dcur = <2>;
-			xlnx,ppc440mc-prio-dcuw = <3>;
-			xlnx,ppc440mc-prio-icu = <4>;
-			xlnx,ppc440mc-prio-splb0 = <1>;
-			xlnx,ppc440mc-prio-splb1 = <0>;
-			xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>;
-			xlnx,ppcdm-asyncmode = <0>;
-			xlnx,ppcds-asyncmode = <0>;
-			xlnx,user-reset = <0>;
-			DMA0: sdma@80 {
-				compatible = "xlnx,ll-dma-1.00.a";
-				dcr-reg = < 0x80 0x11 >;
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 10 2 11 2 >;
-			} ;
-		} ;
-	} ;
-	plb_v46_0: plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
-		ranges ;
-		DIP_Switches_8Bit: gpio@81460000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 7 2 >;
-			reg = < 0x81460000 0x10000 >;
-			xlnx,all-inputs = <1>;
-			xlnx,all-inputs-2 = <0>;
-			xlnx,dout-default = <0>;
-			xlnx,dout-default-2 = <0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <8>;
-			xlnx,interrupt-present = <1>;
-			xlnx,is-bidir = <1>;
-			xlnx,is-bidir-2 = <1>;
-			xlnx,is-dual = <0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-		} ;
-		FLASH: flash@fc000000 {
-			bank-width = <2>;
-			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
-			reg = < 0xfc000000 0x2000000 >;
-			xlnx,family = "virtex5";
-			xlnx,include-datawidth-matching-0 = <0x1>;
-			xlnx,include-datawidth-matching-1 = <0x0>;
-			xlnx,include-datawidth-matching-2 = <0x0>;
-			xlnx,include-datawidth-matching-3 = <0x0>;
-			xlnx,include-negedge-ioregs = <0x0>;
-			xlnx,include-plb-ipif = <0x1>;
-			xlnx,include-wrbuf = <0x1>;
-			xlnx,max-mem-width = <0x10>;
-			xlnx,mch-native-dwidth = <0x20>;
-			xlnx,mch-plb-clk-period-ps = <0x2710>;
-			xlnx,mch-splb-awidth = <0x20>;
-			xlnx,mch0-accessbuf-depth = <0x10>;
-			xlnx,mch0-protocol = <0x0>;
-			xlnx,mch0-rddatabuf-depth = <0x10>;
-			xlnx,mch1-accessbuf-depth = <0x10>;
-			xlnx,mch1-protocol = <0x0>;
-			xlnx,mch1-rddatabuf-depth = <0x10>;
-			xlnx,mch2-accessbuf-depth = <0x10>;
-			xlnx,mch2-protocol = <0x0>;
-			xlnx,mch2-rddatabuf-depth = <0x10>;
-			xlnx,mch3-accessbuf-depth = <0x10>;
-			xlnx,mch3-protocol = <0x0>;
-			xlnx,mch3-rddatabuf-depth = <0x10>;
-			xlnx,mem0-width = <0x10>;
-			xlnx,mem1-width = <0x20>;
-			xlnx,mem2-width = <0x20>;
-			xlnx,mem3-width = <0x20>;
-			xlnx,num-banks-mem = <0x1>;
-			xlnx,num-channels = <0x2>;
-			xlnx,priority-mode = <0x0>;
-			xlnx,synch-mem-0 = <0x0>;
-			xlnx,synch-mem-1 = <0x0>;
-			xlnx,synch-mem-2 = <0x0>;
-			xlnx,synch-mem-3 = <0x0>;
-			xlnx,synch-pipedelay-0 = <0x2>;
-			xlnx,synch-pipedelay-1 = <0x2>;
-			xlnx,synch-pipedelay-2 = <0x2>;
-			xlnx,synch-pipedelay-3 = <0x2>;
-			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
-			xlnx,tavdv-ps-mem-1 = <0x3a98>;
-			xlnx,tavdv-ps-mem-2 = <0x3a98>;
-			xlnx,tavdv-ps-mem-3 = <0x3a98>;
-			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
-			xlnx,tcedv-ps-mem-1 = <0x3a98>;
-			xlnx,tcedv-ps-mem-2 = <0x3a98>;
-			xlnx,tcedv-ps-mem-3 = <0x3a98>;
-			xlnx,thzce-ps-mem-0 = <0x88b8>;
-			xlnx,thzce-ps-mem-1 = <0x1b58>;
-			xlnx,thzce-ps-mem-2 = <0x1b58>;
-			xlnx,thzce-ps-mem-3 = <0x1b58>;
-			xlnx,thzoe-ps-mem-0 = <0x1b58>;
-			xlnx,thzoe-ps-mem-1 = <0x1b58>;
-			xlnx,thzoe-ps-mem-2 = <0x1b58>;
-			xlnx,thzoe-ps-mem-3 = <0x1b58>;
-			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
-			xlnx,tlzwe-ps-mem-1 = <0x0>;
-			xlnx,tlzwe-ps-mem-2 = <0x0>;
-			xlnx,tlzwe-ps-mem-3 = <0x0>;
-			xlnx,twc-ps-mem-0 = <0x2af8>;
-			xlnx,twc-ps-mem-1 = <0x3a98>;
-			xlnx,twc-ps-mem-2 = <0x3a98>;
-			xlnx,twc-ps-mem-3 = <0x3a98>;
-			xlnx,twp-ps-mem-0 = <0x11170>;
-			xlnx,twp-ps-mem-1 = <0x2ee0>;
-			xlnx,twp-ps-mem-2 = <0x2ee0>;
-			xlnx,twp-ps-mem-3 = <0x2ee0>;
-			xlnx,xcl0-linesize = <0x4>;
-			xlnx,xcl0-writexfer = <0x1>;
-			xlnx,xcl1-linesize = <0x4>;
-			xlnx,xcl1-writexfer = <0x1>;
-			xlnx,xcl2-linesize = <0x4>;
-			xlnx,xcl2-writexfer = <0x1>;
-			xlnx,xcl3-linesize = <0x4>;
-			xlnx,xcl3-writexfer = <0x1>;
-		} ;
-		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,compound";
-			ethernet@81c00000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "xlnx,xps-ll-temac-1.01.b";
-				device_type = "network";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 5 2 >;
-				llink-connected = <&DMA0>;
-				local-mac-address = [ 02 00 00 00 00 00 ];
-				reg = < 0x81c00000 0x40 >;
-				xlnx,bus2core-clk-ratio = <1>;
-				xlnx,phy-type = <1>;
-				xlnx,phyaddr = <1>;
-				xlnx,rxcsum = <1>;
-				xlnx,rxfifo = <0x1000>;
-				xlnx,temac-type = <0>;
-				xlnx,txcsum = <1>;
-				xlnx,txfifo = <0x1000>;
-                                phy-handle = <&phy7>;
-                                clock-frequency = <100000000>;
-                                phy7: phy@7 {
-                                          compatible = "marvell,88e1111";
-                                          reg = <7>;
-                                } ;
-			} ;
-		} ;
-		IIC_EEPROM: i2c@81600000 {
-			compatible = "xlnx,xps-iic-2.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 6 2 >;
-			reg = < 0x81600000 0x10000 >;
-			xlnx,clk-freq = <0x5f5e100>;
-			xlnx,family = "virtex5";
-			xlnx,gpo-width = <0x1>;
-			xlnx,iic-freq = <0x186a0>;
-			xlnx,scl-inertial-delay = <0x0>;
-			xlnx,sda-inertial-delay = <0x0>;
-			xlnx,ten-bit-adr = <0x0>;
-		} ;
-		LEDs_8Bit: gpio@81400000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			reg = < 0x81400000 0x10000 >;
-			xlnx,all-inputs = <0>;
-			xlnx,all-inputs-2 = <0>;
-			xlnx,dout-default = <0>;
-			xlnx,dout-default-2 = <0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <8>;
-			xlnx,interrupt-present = <0>;
-			xlnx,is-bidir = <1>;
-			xlnx,is-bidir-2 = <1>;
-			xlnx,is-dual = <0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-		} ;
-		LEDs_Positions: gpio@81420000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			reg = < 0x81420000 0x10000 >;
-			xlnx,all-inputs = <0>;
-			xlnx,all-inputs-2 = <0>;
-			xlnx,dout-default = <0>;
-			xlnx,dout-default-2 = <0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <5>;
-			xlnx,interrupt-present = <0>;
-			xlnx,is-bidir = <1>;
-			xlnx,is-bidir-2 = <1>;
-			xlnx,is-dual = <0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-		} ;
-		Push_Buttons_5Bit: gpio@81440000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 8 2 >;
-			reg = < 0x81440000 0x10000 >;
-			xlnx,all-inputs = <1>;
-			xlnx,all-inputs-2 = <0>;
-			xlnx,dout-default = <0>;
-			xlnx,dout-default-2 = <0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <5>;
-			xlnx,interrupt-present = <1>;
-			xlnx,is-bidir = <1>;
-			xlnx,is-bidir-2 = <1>;
-			xlnx,is-dual = <0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-		} ;
-		RS232_Uart_1: serial@83e00000 {
-			clock-frequency = <100000000>;
-			compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
-			current-speed = <9600>;
-			device_type = "serial";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 9 2 >;
-			reg = < 0x83e00000 0x10000 >;
-			reg-offset = <0x1003>;
-			reg-shift = <2>;
-			xlnx,family = "virtex5";
-			xlnx,has-external-rclk = <0>;
-			xlnx,has-external-xin = <0>;
-			xlnx,is-a-16550 = <1>;
-		} ;
-		SysACE_CompactFlash: sysace@83600000 {
-			compatible = "xlnx,xps-sysace-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 4 2 >;
-			reg = < 0x83600000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,mem-width = <0x10>;
-		} ;
-		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
-			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
-			reg = < 0xffff0000 0x10000 >;
-			xlnx,family = "virtex5";
-		} ;
-		xps_intc_0: interrupt-controller@81800000 {
-			#interrupt-cells = <2>;
-			compatible = "xlnx,xps-intc-1.00.a";
-			interrupt-controller ;
-			reg = < 0x81800000 0x10000 >;
-			xlnx,num-intr-inputs = <0xc>;
-		} ;
-		xps_timebase_wdt_1: xps-timebase-wdt@83a00000 {
-			compatible = "xlnx,xps-timebase-wdt-1.00.b";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 2 0 1 2 >;
-			reg = < 0x83a00000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,wdt-enable-once = <0>;
-			xlnx,wdt-interval = <0x1e>;
-		} ;
-		xps_timer_1: timer@83c00000 {
-			compatible = "xlnx,xps-timer-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 3 2 >;
-			reg = < 0x83c00000 0x10000 >;
-			xlnx,count-width = <0x20>;
-			xlnx,family = "virtex5";
-			xlnx,gen0-assert = <1>;
-			xlnx,gen1-assert = <1>;
-			xlnx,one-timer-only = <1>;
-			xlnx,trig0-assert = <1>;
-			xlnx,trig1-assert = <1>;
-		} ;
-	} ;
-}  ;
diff --git a/src/powerpc/virtex440-ml510.dts b/src/powerpc/virtex440-ml510.dts
deleted file mode 100644
index 81a8dc2c6365..000000000000
--- a/src/powerpc/virtex440-ml510.dts
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- * Xilinx ML510 Reference Design support
- *
- * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design.
- * The reference design contains a bug which prevent PCI DMA from working
- * properly.  A description of the bug is given in the plbv46_pci section. It
- * needs to be fixed by the user until Xilinx updates their reference design.
- *
- * Copyright 2009, Roderick Colenbrander
- */
-
-/dts-v1/;
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "xlnx,ml510-ref-design", "xlnx,virtex440";
-	dcr-parent = <&ppc440_0>;
-	DDR2_SDRAM_DIMM0: memory@0 {
-		device_type = "memory";
-		reg = < 0x0 0x20000000 >;
-	} ;
-	alias {
-		ethernet0 = &Hard_Ethernet_MAC;
-		serial0 = &RS232_Uart_1;
-	} ;
-	chosen {
-		bootargs = "console=ttyS0 root=/dev/ram";
-		linux,stdout-path = "/plb@0/serial@83e00000";
-	} ;
-	cpus {
-		#address-cells = <1>;
-		#cpus = <0x1>;
-		#size-cells = <0>;
-		ppc440_0: cpu@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			clock-frequency = <300000000>;
-			compatible = "PowerPC,440", "ibm,ppc440";
-			d-cache-line-size = <0x20>;
-			d-cache-size = <0x8000>;
-			dcr-access-method = "native";
-			dcr-controller ;
-			device_type = "cpu";
-			i-cache-line-size = <0x20>;
-			i-cache-size = <0x8000>;
-			model = "PowerPC,440";
-			reg = <0>;
-			timebase-frequency = <300000000>;
-			xlnx,apu-control = <0x2000>;
-			xlnx,apu-udi-0 = <0x0>;
-			xlnx,apu-udi-1 = <0x0>;
-			xlnx,apu-udi-10 = <0x0>;
-			xlnx,apu-udi-11 = <0x0>;
-			xlnx,apu-udi-12 = <0x0>;
-			xlnx,apu-udi-13 = <0x0>;
-			xlnx,apu-udi-14 = <0x0>;
-			xlnx,apu-udi-15 = <0x0>;
-			xlnx,apu-udi-2 = <0x0>;
-			xlnx,apu-udi-3 = <0x0>;
-			xlnx,apu-udi-4 = <0x0>;
-			xlnx,apu-udi-5 = <0x0>;
-			xlnx,apu-udi-6 = <0x0>;
-			xlnx,apu-udi-7 = <0x0>;
-			xlnx,apu-udi-8 = <0x0>;
-			xlnx,apu-udi-9 = <0x0>;
-			xlnx,dcr-autolock-enable = <0x1>;
-			xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
-			xlnx,dcu-rd-noncache-plb-prio = <0x0>;
-			xlnx,dcu-rd-touch-plb-prio = <0x0>;
-			xlnx,dcu-rd-urgent-plb-prio = <0x0>;
-			xlnx,dcu-wr-flush-plb-prio = <0x0>;
-			xlnx,dcu-wr-store-plb-prio = <0x0>;
-			xlnx,dcu-wr-urgent-plb-prio = <0x0>;
-			xlnx,dma0-control = <0x0>;
-			xlnx,dma0-plb-prio = <0x0>;
-			xlnx,dma0-rxchannelctrl = <0x1010000>;
-			xlnx,dma0-rxirqtimer = <0x3ff>;
-			xlnx,dma0-txchannelctrl = <0x1010000>;
-			xlnx,dma0-txirqtimer = <0x3ff>;
-			xlnx,dma1-control = <0x0>;
-			xlnx,dma1-plb-prio = <0x0>;
-			xlnx,dma1-rxchannelctrl = <0x1010000>;
-			xlnx,dma1-rxirqtimer = <0x3ff>;
-			xlnx,dma1-txchannelctrl = <0x1010000>;
-			xlnx,dma1-txirqtimer = <0x3ff>;
-			xlnx,dma2-control = <0x0>;
-			xlnx,dma2-plb-prio = <0x0>;
-			xlnx,dma2-rxchannelctrl = <0x1010000>;
-			xlnx,dma2-rxirqtimer = <0x3ff>;
-			xlnx,dma2-txchannelctrl = <0x1010000>;
-			xlnx,dma2-txirqtimer = <0x3ff>;
-			xlnx,dma3-control = <0x0>;
-			xlnx,dma3-plb-prio = <0x0>;
-			xlnx,dma3-rxchannelctrl = <0x1010000>;
-			xlnx,dma3-rxirqtimer = <0x3ff>;
-			xlnx,dma3-txchannelctrl = <0x1010000>;
-			xlnx,dma3-txirqtimer = <0x3ff>;
-			xlnx,endian-reset = <0x0>;
-			xlnx,generate-plb-timespecs = <0x1>;
-			xlnx,icu-rd-fetch-plb-prio = <0x0>;
-			xlnx,icu-rd-spec-plb-prio = <0x0>;
-			xlnx,icu-rd-touch-plb-prio = <0x0>;
-			xlnx,interconnect-imask = <0xffffffff>;
-			xlnx,mplb-allow-lock-xfer = <0x1>;
-			xlnx,mplb-arb-mode = <0x0>;
-			xlnx,mplb-awidth = <0x20>;
-			xlnx,mplb-counter = <0x500>;
-			xlnx,mplb-dwidth = <0x80>;
-			xlnx,mplb-max-burst = <0x8>;
-			xlnx,mplb-native-dwidth = <0x80>;
-			xlnx,mplb-p2p = <0x0>;
-			xlnx,mplb-prio-dcur = <0x2>;
-			xlnx,mplb-prio-dcuw = <0x3>;
-			xlnx,mplb-prio-icu = <0x4>;
-			xlnx,mplb-prio-splb0 = <0x1>;
-			xlnx,mplb-prio-splb1 = <0x0>;
-			xlnx,mplb-read-pipe-enable = <0x1>;
-			xlnx,mplb-sync-tattribute = <0x0>;
-			xlnx,mplb-wdog-enable = <0x1>;
-			xlnx,mplb-write-pipe-enable = <0x1>;
-			xlnx,mplb-write-post-enable = <0x1>;
-			xlnx,num-dma = <0x0>;
-			xlnx,pir = <0xf>;
-			xlnx,ppc440mc-addr-base = <0x0>;
-			xlnx,ppc440mc-addr-high = <0x1fffffff>;
-			xlnx,ppc440mc-arb-mode = <0x0>;
-			xlnx,ppc440mc-bank-conflict-mask = <0x1800000>;
-			xlnx,ppc440mc-control = <0xf810008f>;
-			xlnx,ppc440mc-max-burst = <0x8>;
-			xlnx,ppc440mc-prio-dcur = <0x2>;
-			xlnx,ppc440mc-prio-dcuw = <0x3>;
-			xlnx,ppc440mc-prio-icu = <0x4>;
-			xlnx,ppc440mc-prio-splb0 = <0x1>;
-			xlnx,ppc440mc-prio-splb1 = <0x0>;
-			xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>;
-			xlnx,ppcdm-asyncmode = <0x0>;
-			xlnx,ppcds-asyncmode = <0x0>;
-			xlnx,user-reset = <0x0>;
-		} ;
-	} ;
-	plb_v46_0: plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
-		ranges ;
-		FLASH: flash@fc000000 {
-			bank-width = <2>;
-			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
-			reg = < 0xfc000000 0x2000000 >;
-			xlnx,family = "virtex5";
-			xlnx,include-datawidth-matching-0 = <0x1>;
-			xlnx,include-datawidth-matching-1 = <0x0>;
-			xlnx,include-datawidth-matching-2 = <0x0>;
-			xlnx,include-datawidth-matching-3 = <0x0>;
-			xlnx,include-negedge-ioregs = <0x0>;
-			xlnx,include-plb-ipif = <0x1>;
-			xlnx,include-wrbuf = <0x1>;
-			xlnx,max-mem-width = <0x10>;
-			xlnx,mch-native-dwidth = <0x20>;
-			xlnx,mch-plb-clk-period-ps = <0x2710>;
-			xlnx,mch-splb-awidth = <0x20>;
-			xlnx,mch0-accessbuf-depth = <0x10>;
-			xlnx,mch0-protocol = <0x0>;
-			xlnx,mch0-rddatabuf-depth = <0x10>;
-			xlnx,mch1-accessbuf-depth = <0x10>;
-			xlnx,mch1-protocol = <0x0>;
-			xlnx,mch1-rddatabuf-depth = <0x10>;
-			xlnx,mch2-accessbuf-depth = <0x10>;
-			xlnx,mch2-protocol = <0x0>;
-			xlnx,mch2-rddatabuf-depth = <0x10>;
-			xlnx,mch3-accessbuf-depth = <0x10>;
-			xlnx,mch3-protocol = <0x0>;
-			xlnx,mch3-rddatabuf-depth = <0x10>;
-			xlnx,mem0-width = <0x10>;
-			xlnx,mem1-width = <0x20>;
-			xlnx,mem2-width = <0x20>;
-			xlnx,mem3-width = <0x20>;
-			xlnx,num-banks-mem = <0x1>;
-			xlnx,num-channels = <0x2>;
-			xlnx,priority-mode = <0x0>;
-			xlnx,synch-mem-0 = <0x0>;
-			xlnx,synch-mem-1 = <0x0>;
-			xlnx,synch-mem-2 = <0x0>;
-			xlnx,synch-mem-3 = <0x0>;
-			xlnx,synch-pipedelay-0 = <0x2>;
-			xlnx,synch-pipedelay-1 = <0x2>;
-			xlnx,synch-pipedelay-2 = <0x2>;
-			xlnx,synch-pipedelay-3 = <0x2>;
-			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
-			xlnx,tavdv-ps-mem-1 = <0x3a98>;
-			xlnx,tavdv-ps-mem-2 = <0x3a98>;
-			xlnx,tavdv-ps-mem-3 = <0x3a98>;
-			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
-			xlnx,tcedv-ps-mem-1 = <0x3a98>;
-			xlnx,tcedv-ps-mem-2 = <0x3a98>;
-			xlnx,tcedv-ps-mem-3 = <0x3a98>;
-			xlnx,thzce-ps-mem-0 = <0x88b8>;
-			xlnx,thzce-ps-mem-1 = <0x1b58>;
-			xlnx,thzce-ps-mem-2 = <0x1b58>;
-			xlnx,thzce-ps-mem-3 = <0x1b58>;
-			xlnx,thzoe-ps-mem-0 = <0x1b58>;
-			xlnx,thzoe-ps-mem-1 = <0x1b58>;
-			xlnx,thzoe-ps-mem-2 = <0x1b58>;
-			xlnx,thzoe-ps-mem-3 = <0x1b58>;
-			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
-			xlnx,tlzwe-ps-mem-1 = <0x0>;
-			xlnx,tlzwe-ps-mem-2 = <0x0>;
-			xlnx,tlzwe-ps-mem-3 = <0x0>;
-			xlnx,twc-ps-mem-0 = <0x1adb0>;
-			xlnx,twc-ps-mem-1 = <0x3a98>;
-			xlnx,twc-ps-mem-2 = <0x3a98>;
-			xlnx,twc-ps-mem-3 = <0x3a98>;
-			xlnx,twp-ps-mem-0 = <0x11170>;
-			xlnx,twp-ps-mem-1 = <0x2ee0>;
-			xlnx,twp-ps-mem-2 = <0x2ee0>;
-			xlnx,twp-ps-mem-3 = <0x2ee0>;
-			xlnx,xcl0-linesize = <0x4>;
-			xlnx,xcl0-writexfer = <0x1>;
-			xlnx,xcl1-linesize = <0x4>;
-			xlnx,xcl1-writexfer = <0x1>;
-			xlnx,xcl2-linesize = <0x4>;
-			xlnx,xcl2-writexfer = <0x1>;
-			xlnx,xcl3-linesize = <0x4>;
-			xlnx,xcl3-writexfer = <0x1>;
-		} ;
-		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,compound";
-			ethernet@81c00000 {
-				compatible = "xlnx,xps-ll-temac-1.01.b";
-				device_type = "network";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 8 2 >;
-				llink-connected = <&Hard_Ethernet_MAC_fifo>;
-				local-mac-address = [ 02 00 00 00 00 00 ];
-				reg = < 0x81c00000 0x40 >;
-				xlnx,bus2core-clk-ratio = <0x1>;
-				xlnx,phy-type = <0x3>;
-				xlnx,phyaddr = <0x1>;
-				xlnx,rxcsum = <0x0>;
-				xlnx,rxfifo = <0x8000>;
-				xlnx,temac-type = <0x0>;
-				xlnx,txcsum = <0x0>;
-				xlnx,txfifo = <0x8000>;
-			} ;
-		} ;
-		Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 {
-			compatible = "xlnx,xps-ll-fifo-1.01.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 6 2 >;
-			reg = < 0x81a00000 0x10000 >;
-			xlnx,family = "virtex5";
-		} ;
-		IIC_EEPROM: i2c@81600000 {
-			compatible = "xlnx,xps-iic-2.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 9 2 >;
-			reg = < 0x81600000 0x10000 >;
-			xlnx,clk-freq = <0x5f5e100>;
-			xlnx,family = "virtex5";
-			xlnx,gpo-width = <0x1>;
-			xlnx,iic-freq = <0x186a0>;
-			xlnx,scl-inertial-delay = <0x5>;
-			xlnx,sda-inertial-delay = <0x5>;
-			xlnx,ten-bit-adr = <0x0>;
-		} ;
-		LCD_OPTIONAL: gpio@81420000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			reg = < 0x81420000 0x10000 >;
-			xlnx,all-inputs = <0x0>;
-			xlnx,all-inputs-2 = <0x0>;
-			xlnx,dout-default = <0x0>;
-			xlnx,dout-default-2 = <0x0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <0xb>;
-			xlnx,interrupt-present = <0x0>;
-			xlnx,is-bidir = <0x1>;
-			xlnx,is-bidir-2 = <0x1>;
-			xlnx,is-dual = <0x0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-		} ;
-		LEDs_4Bit: gpio@81400000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			reg = < 0x81400000 0x10000 >;
-			xlnx,all-inputs = <0x0>;
-			xlnx,all-inputs-2 = <0x0>;
-			xlnx,dout-default = <0x0>;
-			xlnx,dout-default-2 = <0x0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <0x4>;
-			xlnx,interrupt-present = <0x0>;
-			xlnx,is-bidir = <0x1>;
-			xlnx,is-bidir-2 = <0x1>;
-			xlnx,is-dual = <0x0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-		} ;
-		RS232_Uart_1: serial@83e00000 {
-			clock-frequency = <100000000>;
-			compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
-			current-speed = <9600>;
-			device_type = "serial";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 11 2 >;
-			reg = < 0x83e00000 0x10000 >;
-			reg-offset = <0x1003>;
-			reg-shift = <2>;
-			xlnx,family = "virtex5";
-			xlnx,has-external-rclk = <0x0>;
-			xlnx,has-external-xin = <0x0>;
-			xlnx,is-a-16550 = <0x1>;
-		} ;
-		SPI_EEPROM: xps-spi@feff8000 {
-			compatible = "xlnx,xps-spi-2.00.b";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 10 2 >;
-			reg = < 0xfeff8000 0x80 >;
-			xlnx,family = "virtex5";
-			xlnx,fifo-exist = <0x1>;
-			xlnx,num-ss-bits = <0x1>;
-			xlnx,num-transfer-bits = <0x8>;
-			xlnx,sck-ratio = <0x80>;
-		} ;
-		SysACE_CompactFlash: sysace@83600000 {
-			compatible = "xlnx,xps-sysace-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 7 2 >;
-			reg = < 0x83600000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,mem-width = <0x10>;
-		} ;
-		plbv46_pci_0: plbv46-pci@85e00000 {
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "xlnx,plbv46-pci-1.03.a";
-			device_type = "pci";
-			reg = < 0x85e00000 0x10000 >;
-
-			/*
-			 * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to
-			 * 0 which means that a read/write to the memory mapped
-			 * i/o region (which starts at 0xa0000000) for pci
-			 * bar 0 on the plb side translates to 0.
-			 * It is important to set this value to 0xa0000000, so
-			 * that inbound and outbound pci transactions work
-			 * properly including DMA.
-			 */
-			ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
-				  0x01000000 0 0x00000000 0xf0000000 0 0x00010000>;
-
-			#interrupt-cells = <1>;
-			interrupt-parent = <&xps_intc_0>;
-			interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* IRQ mapping for pci slots and ALI M1533
-				 * periperhals. In total there are 5 interrupt
-				 * lines connected to a xps_intc controller.
-				 * Four of them are PCI IRQ A, B, C, D and
-				 * which correspond to respectively xpx_intc
-				 * 5, 4, 3 and 2.  The fifth interrupt line is
-				 * connected to the south bridge and this one
-				 * uses irq 1 and is active high instead of
-				 * active low.
-				 *
-				 * The M1533 contains various peripherals
-				 * including AC97 audio, a modem, USB, IDE and
-				 * some power management stuff. The modem
-				 * isn't connected on the ML510 and the power
-				 * management core also isn't used.
-				 */
-
-				/* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */
-				0x3000 0 0 1 &xps_intc_0 3 2
-				0x3000 0 0 2 &xps_intc_0 2 2
-				0x3000 0 0 3 &xps_intc_0 5 2
-				0x3000 0 0 4 &xps_intc_0 4 2
-
-				/* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */
-				/*
-				0x11800 0 0 1 &xps_intc_0 5 0 2
-				0x11800 0 0 2 &xps_intc_0 4 0 2
-				0x11800 0 0 3 &xps_intc_0 3 0 2
-				0x11800 0 0 4 &xps_intc_0 2 0 2
-				*/
-
-				/* According to the datasheet + schematic
-				 * ABCD [FPGA] of slot 5 is mapped to DABC.
-				 * Testing showed that at least A maps to B,
-				 * the mapping of the other pins is a guess
-				 * and for that reason the lines have been
-				 * commented out.
-				 */
-				/* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */
-				0x2800 0 0 1 &xps_intc_0 4 2
-				/*
-				0x2800 0 0 2 &xps_intc_0 3 2
-				0x2800 0 0 3 &xps_intc_0 2 2
-				0x2800 0 0 4 &xps_intc_0 5 2
-				*/
-
-				/* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */
-				/*
-				0x11000 0 0 1 &xps_intc_0 4 0 2
-				0x11000 0 0 2 &xps_intc_0 3 0 2
-				0x11000 0 0 3 &xps_intc_0 2 0 2
-				0x11000 0 0 4 &xps_intc_0 5 0 2
-				*/
-
-				/* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */
-				0x0800 0 0 1 &i8259 7 2
-
-				/* IDSEL 0x1b / dev=11, bus=0 / IDE */
-				0x5800 0 0 1 &i8259 14 2
-
-				/* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */
-				0x7800 0 0 1 &i8259 7 2
-			>;
-			ali_m1533 {
-				#size-cells = <1>;
-				#address-cells = <2>;
-				i8259: interrupt-controller@20 {
-					reg = <1 0x20 2
-							1 0xa0 2
-							1 0x4d0 2>;
-					interrupt-controller;
-					device_type = "interrupt-controller";
-					#address-cells = <0>;
-					#interrupt-cells = <2>;
-					compatible = "chrp,iic";
-
-					/* south bridge irq is active high */
-					interrupts = <1 3>;
-					interrupt-parent = <&xps_intc_0>;
-				};
-			};
-		} ;
-		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
-			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
-			reg = < 0xffff0000 0x10000 >;
-			xlnx,family = "virtex5";
-		} ;
-		xps_intc_0: interrupt-controller@81800000 {
-			#interrupt-cells = <0x2>;
-			compatible = "xlnx,xps-intc-1.00.a";
-			interrupt-controller ;
-			reg = < 0x81800000 0x10000 >;
-			xlnx,num-intr-inputs = <0xc>;
-		} ;
-		xps_tft_0: tft@86e00000 {
-			compatible = "xlnx,xps-tft-1.00.a";
-			reg = < 0x86e00000 0x10000 >;
-			xlnx,dcr-splb-slave-if = <0x1>;
-			xlnx,default-tft-base-addr = <0x0>;
-			xlnx,family = "virtex5";
-			xlnx,i2c-slave-addr = <0x76>;
-			xlnx,mplb-awidth = <0x20>;
-			xlnx,mplb-dwidth = <0x80>;
-			xlnx,mplb-native-dwidth = <0x40>;
-			xlnx,mplb-smallest-slave = <0x20>;
-			xlnx,tft-interface = <0x1>;
-		} ;
-	} ;
-}  ;
diff --git a/src/powerpc/walnut.dts b/src/powerpc/walnut.dts
deleted file mode 100644
index 4a9f726ada13..000000000000
--- a/src/powerpc/walnut.dts
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Device Tree Source for IBM Walnut
- *
- * Copyright 2007 IBM Corp.
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "ibm,walnut";
-	compatible = "ibm,walnut";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC;
-		serial0 = &UART0;
-		serial1 = &UART1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405GP";
-			reg = <0x00000000>;
-			clock-frequency = <200000000>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <16384>;
-			d-cache-size = <16384>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	plb {
-		compatible = "ibm,plb3";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		MAL: mcmal {
-			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <1>;
-			num-rx-chans = <1>;
-			interrupt-parent = <&UIC0>;
-			interrupts = <
-				0xb 0x4 /* TXEOB */
-				0xc 0x4 /* RXEOB */
-				0xa 0x4 /* SERR */
-				0xd 0x4 /* TXDE */
-				0xe 0x4 /* RXDE */>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405gp", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xef600000 0xef600000 0x00a00000>;
-			dcr-reg = <0x0a0 0x005>;
-			clock-frequency = <0>; /* Filled in by zImage */
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <9600>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			UART1: serial@ef600400 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600400 0x00000008>;
-				virtual-reg = <0xef600400>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <9600>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			IIC: i2c@ef600500 {
-				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <0xef600500 0x00000011>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			GPIO: gpio@ef600700 {
-				compatible = "ibm,gpio-405gp";
-				reg = <0xef600700 0x00000020>;
-			};
-
-			EMAC: ethernet@ef600800 {
-				device_type = "network";
-				compatible = "ibm,emac-405gp", "ibm,emac";
-				interrupt-parent = <&UIC0>;
-				interrupts = <
-					0xf 0x4 /* Ethernet */
-					0x9 0x4 /* Ethernet Wake Up */>;
-				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <0xef600800 0x00000070>;
-				mal-device = <&MAL>;
-				mal-tx-channel = <0>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000001>;
-			};
-
-		};
-
-		EBC0: ebc {
-			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <0x012 0x002>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			/* The ranges property is supplied by the bootwrapper
-			 * and is based on the firmware's configuration of the
-			 * EBC bridge
-			 */
-			clock-frequency = <0>; /* Filled in by zImage */
-
-			sram@0,0 {
-				reg = <0x00000000 0x00000000 0x00080000>;
-			};
-
-			flash@0,80000 {
-				compatible = "jedec-flash";
-				bank-width = <1>;
-				reg = <0x00000000 0x00080000 0x00080000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				partition@0 {
-					label = "OpenBIOS";
-					reg = <0x00000000 0x00080000>;
-					read-only;
-				};
-			};
-
-			nvram@1,0 {
-				/* NVRAM and RTC */
-				compatible = "ds1743-nvram";
-				#bytes = <0x2000>;
-				reg = <0x00000001 0x00000000 0x00002000>;
-			};
-
-			keyboard@2,0 {
-				compatible = "intel,82C42PC";
-				reg = <0x00000002 0x00000000 0x00000002>;
-			};
-
-			ir@3,0 {
-				compatible = "ti,TIR2000PAG";
-				reg = <0x00000003 0x00000000 0x00000010>;
-			};
-
-			fpga@7,0 {
-				compatible = "Walnut-FPGA";
-				reg = <0x00000007 0x00000000 0x00000010>;
-				virtual-reg = <0xf0300005>;
-			};
-		};
-
-		PCI0: pci@ec000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
-			primary;
-			reg = <0xeec00000 0x00000008	/* Config space access */
-			       0xeed80000 0x00000004	/* IACK */
-			       0xeed80000 0x00000004	/* Special cycle */
-			       0xef480000 0x00000040>;	/* Internal registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed. Chip supports a second
-			 * IO range but we don't use it for now
-			 */
-			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
-				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
-
-			/* Walnut has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
-			interrupt-map = <
-				/* IDSEL 1 */
-				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
-
-				/* IDSEL 2 */
-				0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
-
-				/* IDSEL 3 */
-				0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
-
-				/* IDSEL 4 */
-				0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
-			>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};
diff --git a/src/powerpc/warp.dts b/src/powerpc/warp.dts
deleted file mode 100644
index e576ee85c42f..000000000000
--- a/src/powerpc/warp.dts
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * Device Tree Source for PIKA Warp
- *
- * Copyright (c) 2008-2009 PIKA Technologies
- *   Sean MacLennan <smaclennan@pikatech.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "pika,warp";
-	compatible = "pika,warp";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		serial0 = &UART0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,440EP";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-440ep","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-440ep","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-440ep";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-440ep";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	plb {
-		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		DMA0: dma {
-			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <0x100 0x027>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <4>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-		};
-
-		POB0: opb {
-		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
-			          0x80000000 0x00000000 0x80000000 0x80000000>;
-		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <0x7 0x4>;
-		  	clock-frequency = <0>; /* Filled in by zImage */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				fpga@2,0 {
-					compatible = "pika,fpga";
-			   		reg = <0x00000002 0x00000000 0x00001000>;
-					interrupts = <0x18 0x8>;
-					interrupt-parent = <&UIC0>;
-				};
-
-				fpga@2,2000 {
-					compatible = "pika,fpga-sgl";
-			   		reg = <0x00000002 0x00002000 0x00000200>;
-				};
-
-				fpga@2,4000 {
-					compatible = "pika,fpga-sd";
-					reg = <0x00000002 0x00004000 0x00004000>;
-				};
-
-				nor@0,0 {
-					compatible = "amd,s29gl032a", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x00400000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "splash";
-						reg = <0x00000000 0x00010000>;
-					};
-					partition@300000 {
-						label = "fpga";
-						reg = <0x0300000 0x00040000>;
-					};
-					partition@340000 {
-						label = "env";
-						reg = <0x0340000 0x00040000>;
-					};
-					partition@380000 {
-						label = "u-boot";
-						reg = <0x0380000 0x00080000>;
-					};
-				};
-
-				ndfc@1,0 {
-					compatible = "ibm,ndfc";
-					reg = <0x00000001 0x00000000 0x00002000>;
-					ccr = <0x00001000>;
-					bank-settings = <0x80002222>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					nand {
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						partition@0 {
-							label = "kernel";
-							reg = <0x00000000 0x00200000>;
-						};
-						partition@200000 {
-							label = "root";
-							reg = <0x00200000 0x03E00000>;
-						};
-						partition@40000000 {
-							label = "persistent";
-							reg = <0x04000000 0x04000000>;
-						};
-						partition@80000000 {
-							label = "persistent1";
-							reg = <0x08000000 0x04000000>;
-						};
-						partition@C0000000 {
-							label = "persistent2";
-							reg = <0x0C000000 0x04000000>;
-						};
-					};
-				};
-			};
-
-			UART0: serial@ef600300 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <0xef600300 0x00000008>;
-		   		virtual-reg = <0xef600300>;
-		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <115200>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0x0 0x4>;
-	   		};
-
-			IIC0: i2c@ef600700 {
-				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <0xef600700 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ad7414@4a {
-					compatible = "adi,ad7414";
-					reg = <0x4a>;
-					interrupts = <0x19 0x8>;
-					interrupt-parent = <&UIC0>;
-				};
-
-				/* This will create 52 and 53 */
-				at24@52 {
-					compatible = "at,24c04";
-					reg = <0x52>;
-				};
-			};
-
-			GPIO0: gpio@ef600b00 {
-				compatible = "ibm,ppc4xx-gpio";
-				reg = <0xef600b00 0x00000048>;
-				#gpio-cells = <2>;
-				gpio-controller;
-			};
-
-			GPIO1: gpio@ef600c00 {
-				compatible = "ibm,ppc4xx-gpio";
-				reg = <0xef600c00 0x00000048>;
-				#gpio-cells = <2>;
-				gpio-controller;
-			};
-
-			power-leds {
-				compatible = "gpio-leds";
-				green {
-					gpios = <&GPIO1 0 0>;
-					default-state = "keep";
-				};
-				red {
-					gpios = <&GPIO1 1 0>;
-					default-state = "keep";
-				};
-			};
-
-			ZMII0: emac-zmii@ef600d00 {
-				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <0xef600d00 0x0000000c>;
-			};
-
-			EMAC0: ethernet@ef600e00 {
-				device_type = "network";
-				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1c 0x4 0x1d 0x4>;
-				reg = <0xef600e00 0x00000070>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0 1>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <0>;
-			};
-
-			usb@ef601000 {
-				compatible = "ohci-be";
-				reg = <0xef601000 0x00000080>;
-				interrupts = <0x8 0x1 0x9 0x1>;
-				interrupt-parent = < &UIC1 >;
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};
diff --git a/src/powerpc/wii.dts b/src/powerpc/wii.dts
deleted file mode 100644
index 77528c9a8dbd..000000000000
--- a/src/powerpc/wii.dts
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * arch/powerpc/boot/dts/wii.dts
- *
- * Nintendo Wii platform device tree source
- * Copyright (C) 2008-2009 The GameCube Linux Team
- * Copyright (C) 2008,2009 Albert Herranz
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- */
-
-/dts-v1/;
-
-/*
- * This is commented-out for now.
- * Until a later patch is merged, the kernel can use only the first
- * contiguous RAM range and will BUG() if the memreserve is outside
- * that range.
- */
-/*/memreserve/ 0x10000000 0x0004000;*/	/* DSP RAM */
-
-/ {
-	model = "nintendo,wii";
-	compatible = "nintendo,wii";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	chosen {
-		bootargs = "root=/dev/mmcblk0p2 rootwait udbg-immortal";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x01800000	/* MEM1 24MB 1T-SRAM */
-		       0x10000000 0x04000000>;	/* MEM2 64MB GDDR3 */
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,broadway@0 {
-			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <729000000>; /* 729MHz */
-			bus-frequency = <243000000>; /* 243MHz core-to-bus 3x */
-			timebase-frequency = <60750000>; /* 243MHz / 4 */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-		};
-	};
-
-	/* devices contained in the hollywood chipset */
-	hollywood {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "nintendo,hollywood";
-                ranges = <0x0c000000 0x0c000000 0x01000000
-			  0x0d000000 0x0d000000 0x00800000
-			  0x0d800000 0x0d800000 0x00800000>;
-		interrupt-parent = <&PIC0>;
-
-		video@0c002000 {
-			compatible = "nintendo,hollywood-vi",
-					"nintendo,flipper-vi";
-			reg = <0x0c002000 0x100>;
-			interrupts = <8>;
-		};
-
-		processor-interface@0c003000 {
-			compatible = "nintendo,hollywood-pi",
-					"nintendo,flipper-pi";
-			reg = <0x0c003000 0x100>;
-
-			PIC0: pic0 {
-				#interrupt-cells = <1>;
-				compatible = "nintendo,flipper-pic";
-				interrupt-controller;
-			};
-		};
-
-		dsp@0c005000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "nintendo,hollywood-dsp",
-					"nintendo,flipper-dsp";
-			reg = <0x0c005000 0x200>;
-			interrupts = <6>;
-		};
-
-		gamepad-controller@0d006400 {
-			compatible = "nintendo,hollywood-si",
-					"nintendo,flipper-si";
-			reg = <0x0d006400 0x100>;
-			interrupts = <3>;
-		};
-
-		audio@0c006c00 {
-			compatible = "nintendo,hollywood-ai",
-					"nintendo,flipper-ai";
-			reg = <0x0d006c00 0x20>;
-			interrupts = <6>;
-		};
-
-		/* External Interface bus */
-		exi@0d006800 {
-			compatible = "nintendo,hollywood-exi",
-					"nintendo,flipper-exi";
-			reg = <0x0d006800 0x40>;
-			virtual-reg = <0x0d006800>;
-			interrupts = <4>;
-		};
-
-		usb@0d040000 {
-			compatible = "nintendo,hollywood-usb-ehci",
-					"usb-ehci";
-			reg = <0x0d040000 0x100>;
-			interrupts = <4>;
-			interrupt-parent = <&PIC1>;
-		};
-
-		usb@0d050000 {
-			compatible = "nintendo,hollywood-usb-ohci",
-					"usb-ohci";
-			reg = <0x0d050000 0x100>;
-			interrupts = <5>;
-			interrupt-parent = <&PIC1>;
-		};
-
-		usb@0d060000 {
-			compatible = "nintendo,hollywood-usb-ohci",
-					"usb-ohci";
-			reg = <0x0d060000 0x100>;
-			interrupts = <6>;
-			interrupt-parent = <&PIC1>;
-		};
-
-		sd@0d070000 {
-			compatible = "nintendo,hollywood-sdhci",
-					"sdhci";
-			reg = <0x0d070000 0x200>;
-			interrupts = <7>;
-			interrupt-parent = <&PIC1>;
-		};
-
-		sdio@0d080000 {
-			compatible = "nintendo,hollywood-sdhci",
-					"sdhci";
-			reg = <0x0d080000 0x200>;
-			interrupts = <8>;
-			interrupt-parent = <&PIC1>;
-		};
-
-		ipc@0d000000 {
-			compatible = "nintendo,hollywood-ipc";
-			reg = <0x0d000000 0x10>;
-			interrupts = <30>;
-			interrupt-parent = <&PIC1>;
-		};
-
-		PIC1: pic1@0d800030 {
-			#interrupt-cells = <1>;
-			compatible = "nintendo,hollywood-pic";
-			reg = <0x0d800030 0x10>;
-			interrupt-controller;
-			interrupts = <14>;
-		};
-
-		GPIO: gpio@0d8000c0 {
-			#gpio-cells = <2>;
-			compatible = "nintendo,hollywood-gpio";
-			reg = <0x0d8000c0 0x40>;
-			gpio-controller;
-
-			/*
-			 * This is commented out while a standard binding
-			 * for i2c over gpio is defined.
-			 */
-			/*
-			i2c-video {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			        compatible = "i2c-gpio";
-
-			        gpios = <&GPIO 15 0
-			                 &GPIO 14 0>;
-			        clock-frequency = <250000>;
-				no-clock-stretching;
-			        scl-is-open-drain;
-			        sda-is-open-drain;
-			        sda-enforce-dir;
-
-			        AVE: audio-video-encoder@70 {
-			                compatible = "nintendo,wii-audio-video-encoder";
-			                reg = <0x70>;
-			        };
-			};
-			*/
-		};
-
-		control@0d800100 {
-			compatible = "nintendo,hollywood-control";
-			reg = <0x0d800100 0x300>;
-		};
-
-		disk@0d806000 {
-			compatible = "nintendo,hollywood-di";
-			reg = <0x0d806000 0x40>;
-			interrupts = <2>;
-		};
-	};
-};
-
diff --git a/src/powerpc/xcalibur1501.dts b/src/powerpc/xcalibur1501.dts
deleted file mode 100644
index c409cbafb126..000000000000
--- a/src/powerpc/xcalibur1501.dts
+++ /dev/null
@@ -1,696 +0,0 @@
-/*
- * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
- * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
- *
- * XCalibur1501 6U CompactPCI single-board computer based on MPC8572E
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-/ {
-	model = "xes,xcalibur1501";
-	compatible = "xes,xcalibur1501", "xes,MPC8572";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8572@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,8572@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
-	};
-
-	localbus@ef005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xef005000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-		/* Local bus region mappings */
-		ranges = <0 0 0 0xf8000000 0x8000000  /* CS0: Flash 1 */
-			  1 0 0 0xf0000000 0x8000000  /* CS1: Flash 2 */
-			  2 0 0 0xef800000 0x40000    /* CS2: NAND CE1 */
-			  3 0 0 0xef840000 0x40000    /* CS3: NAND CE2 */
-			  4 0 0 0xe9000000 0x100000>; /* CS4: USB */
-
-		nor-boot@0,0 {
-			compatible = "amd,s29gl01gp", "cfi-flash";
-			bank-width = <2>;
-			reg = <0 0 0x8000000>; /* 128MB */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "Primary user space";
-				reg = <0x00000000 0x6f00000>; /* 111 MB */
-			};
-			partition@6f00000 {
-				label = "Primary kernel";
-				reg = <0x6f00000 0x1000000>; /* 16 MB */
-			};
-			partition@7f00000 {
-				label = "Primary DTB";
-				reg = <0x7f00000 0x40000>; /* 256 KB */
-			};
-			partition@7f40000 {
-				label = "Primary U-Boot environment";
-				reg = <0x7f40000 0x40000>; /* 256 KB */
-			};
-			partition@7f80000 {
-				label = "Primary U-Boot";
-				reg = <0x7f80000 0x80000>; /* 512 KB */
-				read-only;
-			};
-		};
-
-		nor-alternate@1,0 {
-			compatible = "amd,s29gl01gp", "cfi-flash";
-			bank-width = <2>;
-			//reg = <0xf0000000 0x08000000>; /* 128MB */
-			reg = <1 0 0x8000000>; /* 128MB */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "Secondary user space";
-				reg = <0x00000000 0x6f00000>; /* 111 MB */
-			};
-			partition@6f00000 {
-				label = "Secondary kernel";
-				reg = <0x6f00000 0x1000000>; /* 16 MB */
-			};
-			partition@7f00000 {
-				label = "Secondary DTB";
-				reg = <0x7f00000 0x40000>; /* 256 KB */
-			};
-			partition@7f40000 {
-				label = "Secondary U-Boot environment";
-				reg = <0x7f40000 0x40000>; /* 256 KB */
-			};
-			partition@7f80000 {
-				label = "Secondary U-Boot";
-				reg = <0x7f80000 0x80000>; /* 512 KB */
-				read-only;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/*
-			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
-			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
-			 * MT29F16G08FAA (2x 1 GB), depending on the build
-			 * configuration
-			 */
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <2 0 0x40000>;
-			/* U-Boot should fix this up if chip size > 1 GB */
-			partition@0 {
-				label = "NAND Filesystem";
-				reg = <0 0x40000000>;
-			};
-		};
-
-		usb@4,0 {
-			compatible = "nxp,usb-isp1761";
-			reg = <4 0 0x100000>;
-			bus-width = <32>;
-			interrupt-parent = <&mpic>;
-			interrupts = <10 1>;
-		};
-	};
-
-	soc8572@ef000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8572-immr", "simple-bus";
-		ranges = <0x0 0 0xef000000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		memory-controller@6000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x6000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8572-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x100000>; // L2, 1M
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			temp-sensor@48 {
-				compatible = "dallas,ds1631", "dallas,ds1621";
-				reg = <0x48>;
-			};
-
-			temp-sensor@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			cpu-supervisor@51 {
-				compatible = "dallas,ds4510";
-				reg = <0x51>;
-			};
-
-			eeprom@54 {
-				compatible = "atmel,at24c128b";
-				reg = <0x54>;
-			};
-
-			rtc@68 {
-				compatible = "stm,m41t00",
-				             "dallas,ds1338";
-				reg = <0x68>;
-			};
-
-			pcie-switch@6a {
-				compatible = "plx,pex8648";
-				reg = <0x6a>;
-			};
-
-			/* On-board signals for VID, flash, serial */
-			gpio1: gpio@18 {
-				compatible = "nxp,pca9557";
-				reg = <0x18>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			/* PMC0/XMC0 signals */
-			gpio2: gpio@1c {
-				compatible = "nxp,pca9557";
-				reg = <0x1c>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			/* PMC1/XMC1 signals */
-			gpio3: gpio@1d {
-				compatible = "nxp,pca9557";
-				reg = <0x1d>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			/* CompactPCI signals (sysen, GA[4:0]) */
-			gpio4: gpio@1e {
-				compatible = "nxp,pca9557";
-				reg = <0x1e>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			/* CompactPCI J5 GPIO and FAL/DEG/PRST */
-			gpio5: gpio@1f {
-				compatible = "nxp,pca9557";
-				reg = <0x1f>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		/* eTSEC 1 front panel 0 */
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <4 1>;
-					reg = <0x1>;
-				};
-				phy1: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <4 1>;
-					reg = <0x2>;
-				};
-				phy2: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x3>;
-				};
-				phy3: ethernet-phy@4 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x4>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC 2 front panel 1 */
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC 3 PICMG2.16 backplane port 0 */
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC 4 PICMG2.16 backplane port 1 */
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* UART0 */
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		/* UART1 */
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8572-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		gpio0: gpio@f000 {
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x1000>;
-			interrupts = <47 2>;
-			interrupt-parent = <&mpic>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&gpio0 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&gpio0 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&gpio0 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&gpio0 7 1>;
-			};
-		};
-
-		/* PME (pattern-matcher) */
-		pme@10000 {
-			compatible = "fsl,mpc8572-pme", "pme8572";
-			reg = <0x10000 0x5000>;
-			interrupts = <57 2 64 2 65 2 66 2 67 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		tlu@2f000 {
-			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
-			reg = <0x2f000 0x1000>;
-			interrupts = <61 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		tlu@15000 {
-			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
-			reg = <0x15000 0x1000>;
-			interrupts = <75 2>;
-			interrupt-parent = <&mpic>;
-		};
-	};
-
-	/*
-	 * PCI Express controller 3 @ ef008000 is not used.
-	 * This would have been pci0 on other mpc85xx platforms.
-	 *
-	 * PCI Express controller 2 @ ef009000 is not used.
-	 * This would have been pci1 on other mpc85xx platforms.
-	 */
-
-	/* PCI Express controller 1, wired to PEX8648 PCIe switch */
-	pci2: pcie@ef00a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xef00a000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
-			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x40000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
diff --git a/src/powerpc/xpedite5200.dts b/src/powerpc/xpedite5200.dts
deleted file mode 100644
index 8fd7b7031357..000000000000
--- a/src/powerpc/xpedite5200.dts
+++ /dev/null
@@ -1,468 +0,0 @@
-/*
- * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
- * Based on TQM8548 device tree
- *
- * XPedite5200 PrPMC/XMC module based on MPC8548E
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-/ {
-	model = "xes,xpedite5200";
-	compatible = "xes,xpedite5200", "xes,MPC8548";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8548@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;	// Filled in by U-Boot
-	};
-
-	soc@ef000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xef000000 0x100000>;
-		bus-frequency = <0>;
-		compatible = "fsl,mpc8548-immr", "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8548-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8548-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		/* On-card I2C */
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			/*
-			 * Board GPIO:
-			 * 	0: BRD_CFG0 (1: P14 IO present)
-			 * 	1: BRD_CFG1 (1: FP ethernet present)
-			 * 	2: BRD_CFG2 (1: XMC IO present)
-			 * 	3: XMC root complex indicator
-			 * 	4: Flash boot device indicator
-			 * 	5: Flash write protect enable
-			 * 	6: PMC monarch indicator
-			 * 	7: PMC EREADY
-			 */
-			gpio1: gpio@18 {
-				compatible = "nxp,pca9556";
-				reg = <0x18>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			/* P14 GPIO */
-			gpio2: gpio@19 {
-				compatible = "nxp,pca9556";
-				reg = <0x19>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			eeprom@50 {
-				compatible = "atmel,at24c16";
-				reg = <0x50>;
-			};
-
-			rtc@68 {
-				compatible = "stm,m41t00",
-					     "dallas,ds1338";
-				reg = <0x68>;
-			};
-
-			dtt@48 {
-				compatible = "maxim,max1237";
-				reg = <0x34>;
-			};
-		};
-
-		/* Off-card I2C */
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		/* eTSEC1: Front panel port 0 */
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x1>;
-				};
-				phy1: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x2>;
-				};
-				phy2: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x3>;
-				};
-				phy3: ethernet-phy@4 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x4>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC2: Front panel port 1 */
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC3: Rear panel port 2 */
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC4: Rear panel port 3 */
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			current-speed = <115200>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			current-speed = <115200>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	// global utilities reg
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-	};
-
-	localbus@ef005000 {
-		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
-			     "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xef005000 0x100>;	// BRx, ORx, etc.
-		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
-
-		ranges = <
-			0 0x0 0xfc000000 0x04000000	// NOR boot flash
-			1 0x0 0xf8000000 0x04000000	// NOR expansion flash
-			2 0x0 0xef800000 0x00010000	// NAND CE1
-			3 0x0 0xef840000 0x00010000	// NAND CE2
-		>;
-
-		nor-boot@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0 0x0 0x4000000>;
-			bank-width = <2>;
-
-			partition@0 {
-				label = "Primary OS";
-				reg = <0x00000000 0x180000>;
-			};
-			partition@180000 {
-				label = "Secondary OS";
-				reg = <0x00180000 0x180000>;
-			};
-			partition@300000 {
-				label = "User";
-				reg = <0x00300000 0x3c80000>;
-			};
-			partition@3f80000 {
-				label = "Boot firmware";
-				reg = <0x03f80000 0x80000>;
-			};
-		};
-
-		nor-alternate@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <1 0x0 0x4000000>;
-			bank-width = <2>;
-
-			partition@0 {
-				label = "Filesystem";
-				reg = <0x00000000 0x3f80000>;
-			};
-			partition@3f80000 {
-				label = "Alternate boot firmware";
-				reg = <0x03f80000 0x80000>;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xes,address-ctl-nand";
-			reg = <2 0x0 0x10000>;
-			cle-line = <0x8>;	/* CLE tied to A3 */
-			ale-line = <0x10>;	/* ALE tied to A4 */
-
-			/* U-Boot should fix this up */
-			partition@0 {
-				label = "NAND Filesystem";
-				reg = <0 0x40000000>;
-			};
-		};
-	};
-
-	/* PMC interface */
-	pci0: pci@ef008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xef008000 0x1000>;
-		clock-frequency = <33333333>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL */
-				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000
-			  0x01000000 0 0x00000000 0xe8000000 0 0x00800000>;
-	};
-
-	/* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */
-};
diff --git a/src/powerpc/xpedite5200_xmon.dts b/src/powerpc/xpedite5200_xmon.dts
deleted file mode 100644
index 0baa8283d08c..000000000000
--- a/src/powerpc/xpedite5200_xmon.dts
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
- * Based on TQM8548 device tree
- *
- * XPedite5200 PrPMC/XMC module based on MPC8548E.  This dts is for the
- * xMon boot loader memory map which differs from U-Boot's.
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-/ {
-	model = "xes,xpedite5200";
-	compatible = "xes,xpedite5200", "xes,MPC8548";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	form-factor = "PMC/XMC";
-	boot-bank = <0x0>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8548@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;	// L1, 32K
-			i-cache-size = <0x8000>;	// L1, 32K
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;	// Filled in by boot loader
-	};
-
-	soc@ef000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xef000000 0x100000>;
-		bus-frequency = <0>;
-		compatible = "fsl,mpc8548-immr", "simple-bus";
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8548-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8548-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8548-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x80000>;	// L2, 512K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		/* On-card I2C */
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			/*
-			 * Board GPIO:
-			 * 	0: BRD_CFG0 (1: P14 IO present)
-			 * 	1: BRD_CFG1 (1: FP ethernet present)
-			 * 	2: BRD_CFG2 (1: XMC IO present)
-			 * 	3: XMC root complex indicator
-			 * 	4: Flash boot device indicator
-			 * 	5: Flash write protect enable
-			 * 	6: PMC monarch indicator
-			 * 	7: PMC EREADY
-			 */
-			gpio1: gpio@18 {
-				compatible = "nxp,pca9556";
-				reg = <0x18>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			/* P14 GPIO */
-			gpio2: gpio@19 {
-				compatible = "nxp,pca9556";
-				reg = <0x19>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			eeprom@50 {
-				compatible = "atmel,at24c16";
-				reg = <0x50>;
-			};
-
-			rtc@68 {
-				compatible = "stm,m41t00",
-					     "dallas,ds1338";
-				reg = <0x68>;
-			};
-
-			dtt@48 {
-				compatible = "maxim,max1237";
-				reg = <0x34>;
-			};
-		};
-
-		/* Off-card I2C */
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8548-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		/* eTSEC1: Front panel port 0 */
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x1>;
-				};
-				phy1: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x2>;
-				};
-				phy2: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x3>;
-				};
-				phy3: ethernet-phy@4 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x4>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC2: Front panel port 1 */
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC3: Rear panel port 2 */
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC4: Rear panel port 3 */
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			current-speed = <9600>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			current-speed = <9600>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	// global utilities reg
-			compatible = "fsl,mpc8548-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-	};
-
-	localbus@ef005000 {
-		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
-			     "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0xef005000 0x100>;	// BRx, ORx, etc.
-		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
-
-		ranges = <
-			0 0x0 0xf8000000 0x08000000	// NOR boot flash
-			1 0x0 0xf0000000 0x08000000	// NOR expansion flash
-			2 0x0 0xe8000000 0x00010000	// NAND CE1
-			3 0x0 0xe8010000 0x00010000	// NAND CE2
-		>;
-
-		nor-boot@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0 0x0 0x4000000>;
-			bank-width = <2>;
-
-			partition@0 {
-				label = "Primary OS";
-				reg = <0x00000000 0x180000>;
-			};
-			partition@180000 {
-				label = "Secondary OS";
-				reg = <0x00180000 0x180000>;
-			};
-			partition@300000 {
-				label = "User";
-				reg = <0x00300000 0x3c80000>;
-			};
-			partition@3f80000 {
-				label = "Boot firmware";
-				reg = <0x03f80000 0x80000>;
-			};
-		};
-
-		nor-alternate@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <1 0x0 0x4000000>;
-			bank-width = <2>;
-
-			partition@0 {
-				label = "Filesystem";
-				reg = <0x00000000 0x3f80000>;
-			};
-			partition@3f80000 {
-				label = "Alternate boot firmware";
-				reg = <0x03f80000 0x80000>;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xes,address-ctl-nand";
-			reg = <2 0x0 0x10000>;
-			cle-line = <0x8>;	/* CLE tied to A3 */
-			ale-line = <0x10>;	/* ALE tied to A4 */
-
-			partition@0 {
-				label = "NAND Filesystem";
-				reg = <0 0x40000000>;
-			};
-		};
-	};
-
-	/* PMC interface */
-	pci0: pci@ef008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xef008000 0x1000>;
-		clock-frequency = <33333333>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-				/* IDSEL */
-				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xd0000000 0 0x01000000>;
-	};
-
-	/* XMC PCIe */
-	pci1: pcie@ef00a000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x00000 0 0 1 &mpic 0 1
-			0x00000 0 0 2 &mpic 1 1
-			0x00000 0 0 3 &mpic 2 1
-			0x00000 0 0 4 &mpic 3 1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xd1000000 0 0x01000000>;
-		clock-frequency = <33333333>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xef00a000 0x1000>;
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0 0xc0000000 0x02000000 0
-			          0xc0000000 0 0x20000000
-				  0x01000000 0 0x00000000 0x01000000 0
-				  0x00000000 0 0x08000000>;
-		};
-	};
-
-	/* Needed for dtbImage boot wrapper compatibility */
-	chosen {
-		linux,stdout-path = &serial0;
-	};
-};
diff --git a/src/powerpc/xpedite5301.dts b/src/powerpc/xpedite5301.dts
deleted file mode 100644
index 04cb410da48b..000000000000
--- a/src/powerpc/xpedite5301.dts
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
- * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
- *
- * XPedite5301 PMC/XMC module based on MPC8572E
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-/ {
-	model = "xes,xpedite5301";
-	compatible = "xes,xpedite5301", "xes,MPC8572";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	form-factor = "PMC/XMC";
-	boot-bank = <0x0>;	/* 0: Primary flash, 1: Secondary flash */
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8572@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,8572@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
-	};
-
-	localbus@ef005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xef005000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-		/* Local bus region mappings */
-		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
-			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
-			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
-			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
-
-		nor-boot@0,0 {
-			compatible = "amd,s29gl01gp", "cfi-flash";
-			bank-width = <2>;
-			reg = <0 0 0x8000000>; /* 128MB */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "Primary user space";
-				reg = <0x00000000 0x6f00000>; /* 111 MB */
-			};
-			partition@6f00000 {
-				label = "Primary kernel";
-				reg = <0x6f00000 0x1000000>; /* 16 MB */
-			};
-			partition@7f00000 {
-				label = "Primary DTB";
-				reg = <0x7f00000 0x40000>; /* 256 KB */
-			};
-			partition@7f40000 {
-				label = "Primary U-Boot environment";
-				reg = <0x7f40000 0x40000>; /* 256 KB */
-			};
-			partition@7f80000 {
-				label = "Primary U-Boot";
-				reg = <0x7f80000 0x80000>; /* 512 KB */
-				read-only;
-			};
-		};
-
-		nor-alternate@1,0 {
-			compatible = "amd,s29gl01gp", "cfi-flash";
-			bank-width = <2>;
-			//reg = <0xf0000000 0x08000000>; /* 128MB */
-			reg = <1 0 0x8000000>; /* 128MB */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "Secondary user space";
-				reg = <0x00000000 0x6f00000>; /* 111 MB */
-			};
-			partition@6f00000 {
-				label = "Secondary kernel";
-				reg = <0x6f00000 0x1000000>; /* 16 MB */
-			};
-			partition@7f00000 {
-				label = "Secondary DTB";
-				reg = <0x7f00000 0x40000>; /* 256 KB */
-			};
-			partition@7f40000 {
-				label = "Secondary U-Boot environment";
-				reg = <0x7f40000 0x40000>; /* 256 KB */
-			};
-			partition@7f80000 {
-				label = "Secondary U-Boot";
-				reg = <0x7f80000 0x80000>; /* 512 KB */
-				read-only;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/*
-			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
-			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
-			 * MT29F16G08FAA (2x 1 GB), depending on the build
-			 * configuration
-			 */
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <2 0 0x40000>;
-			/* U-Boot should fix this up if chip size > 1 GB */
-			partition@0 {
-				label = "NAND Filesystem";
-				reg = <0 0x40000000>;
-			};
-		};
-
-	};
-
-	soc8572@ef000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8572-immr", "simple-bus";
-		ranges = <0x0 0 0xef000000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		memory-controller@6000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x6000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8572-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x100000>; // L2, 1M
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			temp-sensor@48 {
-				compatible = "dallas,ds1631", "dallas,ds1621";
-				reg = <0x48>;
-			};
-
-			temp-sensor@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			cpu-supervisor@51 {
-				compatible = "dallas,ds4510";
-				reg = <0x51>;
-			};
-
-			eeprom@54 {
-				compatible = "atmel,at24c128b";
-				reg = <0x54>;
-			};
-
-			rtc@68 {
-				compatible = "stm,m41t00",
-				             "dallas,ds1338";
-				reg = <0x68>;
-			};
-
-			pcie-switch@70 {
-				compatible = "plx,pex8518";
-				reg = <0x70>;
-			};
-
-			gpio1: gpio@18 {
-				compatible = "nxp,pca9557";
-				reg = <0x18>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			gpio2: gpio@1c {
-				compatible = "nxp,pca9557";
-				reg = <0x1c>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			gpio3: gpio@1e {
-				compatible = "nxp,pca9557";
-				reg = <0x1e>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			gpio4: gpio@1f {
-				compatible = "nxp,pca9557";
-				reg = <0x1f>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		/* eTSEC 1 */
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x1>;
-				};
-				phy1: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x2>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC 2 */
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* UART0 */
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		/* UART1 */
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8572-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		gpio0: gpio@f000 {
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x1000>;
-			interrupts = <47 2>;
-			interrupt-parent = <&mpic>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&gpio0 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&gpio0 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&gpio0 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&gpio0 7 1>;
-			};
-		};
-
-		/* PME (pattern-matcher) */
-		pme@10000 {
-			compatible = "fsl,mpc8572-pme", "pme8572";
-			reg = <0x10000 0x5000>;
-			interrupts = <57 2 64 2 65 2 66 2 67 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		tlu@2f000 {
-			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
-			reg = <0x2f000 0x1000>;
-			interrupts = <61 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		tlu@15000 {
-			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
-			reg = <0x15000 0x1000>;
-			interrupts = <75 2>;
-			interrupt-parent = <&mpic>;
-		};
-	};
-
-	/*
-	 * PCI Express controller 3 @ ef008000 is not used.
-	 * This would have been pci0 on other mpc85xx platforms.
-	 */
-
-	/* PCI Express controller 2, wired to XMC P15 connector */
-	pci1: pcie@ef009000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xef009000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
-			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
-			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
-			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
-		pcie@0 {
-			reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x10000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	/* PCI Express controller 1, wired to PEX8112 for PMC interface */
-	pci2: pcie@ef00a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xef00a000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
-			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x40000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
diff --git a/src/powerpc/xpedite5330.dts b/src/powerpc/xpedite5330.dts
deleted file mode 100644
index 73f8620f1ce7..000000000000
--- a/src/powerpc/xpedite5330.dts
+++ /dev/null
@@ -1,707 +0,0 @@
-/*
- * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
- * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
- *
- * XPedite5330 3U CompactPCI module based on MPC8572E
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-/ {
-	model = "xes,xpedite5330";
-	compatible = "xes,xpedite5330", "xes,MPC8572";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	form-factor = "3U CompactPCI";
-	boot-bank = <0x0>;	/* 0: Primary flash, 1: Secondary flash */
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	pmcslots {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmcslot@0 {
-			cell-index = <0>;
-			/*
-			 * boolean properties (true if defined):
-			 *     monarch;
-			 *     module-present;
-			 */
-		};
-	};
-
-	xmcslots {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		xmcslot@0 {
-			cell-index = <0>;
-			/*
-			 * boolean properties (true if defined):
-			 *     module-present;
-			 */
-		};
-	};
-
-	cpci {
-		/*
-		 * boolean properties (true if defined):
-		 *     system-controller;
-		 */
-		system-controller;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8572@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,8572@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
-	};
-
-	localbus@ef005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xef005000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-		/* Local bus region mappings */
-		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
-			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
-			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
-			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
-
-		nor-boot@0,0 {
-			compatible = "amd,s29gl01gp", "cfi-flash";
-			bank-width = <2>;
-			reg = <0 0 0x8000000>; /* 128MB */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "Primary user space";
-				reg = <0x00000000 0x6f00000>; /* 111 MB */
-			};
-			partition@6f00000 {
-				label = "Primary kernel";
-				reg = <0x6f00000 0x1000000>; /* 16 MB */
-			};
-			partition@7f00000 {
-				label = "Primary DTB";
-				reg = <0x7f00000 0x40000>; /* 256 KB */
-			};
-			partition@7f40000 {
-				label = "Primary U-Boot environment";
-				reg = <0x7f40000 0x40000>; /* 256 KB */
-			};
-			partition@7f80000 {
-				label = "Primary U-Boot";
-				reg = <0x7f80000 0x80000>; /* 512 KB */
-				read-only;
-			};
-		};
-
-		nor-alternate@1,0 {
-			compatible = "amd,s29gl01gp", "cfi-flash";
-			bank-width = <2>;
-			//reg = <0xf0000000 0x08000000>; /* 128MB */
-			reg = <1 0 0x8000000>; /* 128MB */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "Secondary user space";
-				reg = <0x00000000 0x6f00000>; /* 111 MB */
-			};
-			partition@6f00000 {
-				label = "Secondary kernel";
-				reg = <0x6f00000 0x1000000>; /* 16 MB */
-			};
-			partition@7f00000 {
-				label = "Secondary DTB";
-				reg = <0x7f00000 0x40000>; /* 256 KB */
-			};
-			partition@7f40000 {
-				label = "Secondary U-Boot environment";
-				reg = <0x7f40000 0x40000>; /* 256 KB */
-			};
-			partition@7f80000 {
-				label = "Secondary U-Boot";
-				reg = <0x7f80000 0x80000>; /* 512 KB */
-				read-only;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/*
-			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
-			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
-			 * MT29F16G08FAA (2x 1 GB), depending on the build
-			 * configuration
-			 */
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <2 0 0x40000>;
-			/* U-Boot should fix this up if chip size > 1 GB */
-			partition@0 {
-				label = "NAND Filesystem";
-				reg = <0 0x40000000>;
-			};
-		};
-
-	};
-
-	soc8572@ef000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8572-immr", "simple-bus";
-		ranges = <0x0 0 0xef000000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		memory-controller@6000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x6000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8572-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x100000>; // L2, 1M
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			temp-sensor@48 {
-				compatible = "dallas,ds1631", "dallas,ds1621";
-				reg = <0x48>;
-			};
-
-			temp-sensor@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			cpu-supervisor@51 {
-				compatible = "dallas,ds4510";
-				reg = <0x51>;
-			};
-
-			eeprom@54 {
-				compatible = "atmel,at24c128b";
-				reg = <0x54>;
-			};
-
-			rtc@68 {
-				compatible = "stm,m41t00",
-				             "dallas,ds1338";
-				reg = <0x68>;
-			};
-
-			pcie-switch@70 {
-				compatible = "plx,pex8518";
-				reg = <0x70>;
-			};
-
-			gpio1: gpio@18 {
-				compatible = "nxp,pca9557";
-				reg = <0x18>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			gpio2: gpio@1c {
-				compatible = "nxp,pca9557";
-				reg = <0x1c>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			gpio3: gpio@1e {
-				compatible = "nxp,pca9557";
-				reg = <0x1e>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			gpio4: gpio@1f {
-				compatible = "nxp,pca9557";
-				reg = <0x1f>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		/* eTSEC 1 */
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x1>;
-				};
-				phy1: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x2>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC 2 */
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* UART0 */
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		/* UART1 */
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8572-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		gpio0: gpio@f000 {
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x1000>;
-			interrupts = <47 2>;
-			interrupt-parent = <&mpic>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&gpio0 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&gpio0 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&gpio0 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&gpio0 7 1>;
-			};
-		};
-
-		/* PME (pattern-matcher) */
-		pme@10000 {
-			compatible = "fsl,mpc8572-pme", "pme8572";
-			reg = <0x10000 0x5000>;
-			interrupts = <57 2 64 2 65 2 66 2 67 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		tlu@2f000 {
-			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
-			reg = <0x2f000 0x1000>;
-			interrupts = <61 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		tlu@15000 {
-			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
-			reg = <0x15000 0x1000>;
-			interrupts = <75 2>;
-			interrupt-parent = <&mpic>;
-		};
-	};
-
-	/* PCI Express controller 3 - CompactPCI bus via PEX8112 bridge */
-	pci0: pcie@ef008000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xef008000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe9000000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xe0000000
-				  0x02000000 0x0 0xe0000000
-				  0x0 0x10000000
-
-				  0x01000000 0x0 0x0
-				  0x01000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	/* PCI Express controller 2, PMC module via PEX8112 bridge */
-	pci1: pcie@ef009000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xef009000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
-			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
-			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
-			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x10000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	/* PCI Express controller 1, XMC P15 */
-	pci2: pcie@ef00a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xef00a000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
-			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x40000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
diff --git a/src/powerpc/xpedite5370.dts b/src/powerpc/xpedite5370.dts
deleted file mode 100644
index cd0ea2b99362..000000000000
--- a/src/powerpc/xpedite5370.dts
+++ /dev/null
@@ -1,638 +0,0 @@
-/*
- * Copyright (C) 2008 Extreme Engineering Solutions, Inc.
- * Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
- *
- * XPedite5370 3U VPX single-board computer based on MPC8572E
- *
- * This is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-/ {
-	model = "xes,xpedite5370";
-	compatible = "xes,xpedite5370", "xes,MPC8572";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8572@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-
-		PowerPC,8572@1 {
-			device_type = "cpu";
-			reg = <0x1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x0>;	// Filled in by U-Boot
-	};
-
-	localbus@ef005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
-		reg = <0 0xef005000 0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-		/* Local bus region mappings */
-		ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
-			  1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
-			  2 0 0 0xef800000 0x40000   /* CS2: NAND CE1 */
-			  3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
-
-		nor-boot@0,0 {
-			compatible = "amd,s29gl01gp", "cfi-flash";
-			bank-width = <2>;
-			reg = <0 0 0x8000000>; /* 128MB */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "Primary user space";
-				reg = <0x00000000 0x6f00000>; /* 111 MB */
-			};
-			partition@6f00000 {
-				label = "Primary kernel";
-				reg = <0x6f00000 0x1000000>; /* 16 MB */
-			};
-			partition@7f00000 {
-				label = "Primary DTB";
-				reg = <0x7f00000 0x40000>; /* 256 KB */
-			};
-			partition@7f40000 {
-				label = "Primary U-Boot environment";
-				reg = <0x7f40000 0x40000>; /* 256 KB */
-			};
-			partition@7f80000 {
-				label = "Primary U-Boot";
-				reg = <0x7f80000 0x80000>; /* 512 KB */
-				read-only;
-			};
-		};
-
-		nor-alternate@1,0 {
-			compatible = "amd,s29gl01gp", "cfi-flash";
-			bank-width = <2>;
-			//reg = <0xf0000000 0x08000000>; /* 128MB */
-			reg = <1 0 0x8000000>; /* 128MB */
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "Secondary user space";
-				reg = <0x00000000 0x6f00000>; /* 111 MB */
-			};
-			partition@6f00000 {
-				label = "Secondary kernel";
-				reg = <0x6f00000 0x1000000>; /* 16 MB */
-			};
-			partition@7f00000 {
-				label = "Secondary DTB";
-				reg = <0x7f00000 0x40000>; /* 256 KB */
-			};
-			partition@7f40000 {
-				label = "Secondary U-Boot environment";
-				reg = <0x7f40000 0x40000>; /* 256 KB */
-			};
-			partition@7f80000 {
-				label = "Secondary U-Boot";
-				reg = <0x7f80000 0x80000>; /* 512 KB */
-				read-only;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/*
-			 * Actual part could be ST Micro NAND08GW3B2A (1 GB),
-			 * Micron MT29F8G08DAA (2x 512 MB), or Micron
-			 * MT29F16G08FAA (2x 1 GB), depending on the build
-			 * configuration
-			 */
-			compatible = "fsl,mpc8572-fcm-nand",
-				     "fsl,elbc-fcm-nand";
-			reg = <2 0 0x40000>;
-			/* U-Boot should fix this up if chip size > 1 GB */
-			partition@0 {
-				label = "NAND Filesystem";
-				reg = <0 0x40000000>;
-			};
-		};
-
-	};
-
-	soc8572@ef000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "fsl,mpc8572-immr", "simple-bus";
-		ranges = <0x0 0 0xef000000 0x100000>;
-		bus-frequency = <0>;		// Filled out by uboot.
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <12>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8572-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		memory-controller@6000 {
-			compatible = "fsl,mpc8572-memory-controller";
-			reg = <0x6000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8572-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x100000>; // L2, 1M
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			temp-sensor@48 {
-				compatible = "dallas,ds1631", "dallas,ds1621";
-				reg = <0x48>;
-			};
-
-			temp-sensor@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			cpu-supervisor@51 {
-				compatible = "dallas,ds4510";
-				reg = <0x51>;
-			};
-
-			eeprom@54 {
-				compatible = "atmel,at24c128b";
-				reg = <0x54>;
-			};
-
-			rtc@68 {
-				compatible = "stm,m41t00",
-				             "dallas,ds1338";
-				reg = <0x68>;
-			};
-
-			pcie-switch@70 {
-				compatible = "plx,pex8518";
-				reg = <0x70>;
-			};
-
-			gpio1: gpio@18 {
-				compatible = "nxp,pca9557";
-				reg = <0x18>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			gpio2: gpio@1c {
-				compatible = "nxp,pca9557";
-				reg = <0x1c>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			gpio3: gpio@1e {
-				compatible = "nxp,pca9557";
-				reg = <0x1e>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-
-			gpio4: gpio@1f {
-				compatible = "nxp,pca9557";
-				reg = <0x1f>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				polarity = <0x00>;
-			};
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@c300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0xc300 0x4>;
-			ranges = <0x0 0xc100 0x200>;
-			cell-index = <1>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <76 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <77 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <78 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <79 2>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8572-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		/* eTSEC 1 */
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x1>;
-				};
-				phy1: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <8 1>;
-					reg = <0x2>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* eTSEC 2 */
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "eTSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "sgmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		/* UART0 */
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		/* UART1 */
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8572-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
-				     "fsl,sec2.1", "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <45 2 58 2>;
-			interrupt-parent = <&mpic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x9fe>;
-			fsl,descriptor-types-mask = <0x3ab0ebf>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		gpio0: gpio@f000 {
-			compatible = "fsl,mpc8572-gpio";
-			reg = <0xf000 0x1000>;
-			interrupts = <47 2>;
-			interrupt-parent = <&mpic>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		};
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&gpio0 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&gpio0 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&gpio0 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&gpio0 7 1>;
-			};
-		};
-
-		/* PME (pattern-matcher) */
-		pme@10000 {
-			compatible = "fsl,mpc8572-pme", "pme8572";
-			reg = <0x10000 0x5000>;
-			interrupts = <57 2 64 2 65 2 66 2 67 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		tlu@2f000 {
-			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
-			reg = <0x2f000 0x1000>;
-			interrupts = <61 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		tlu@15000 {
-			compatible = "fsl,mpc8572-tlu", "fsl_tlu";
-			reg = <0x15000 0x1000>;
-			interrupts = <75 2>;
-			interrupt-parent = <&mpic>;
-		};
-	};
-
-	/*
-	 * PCI Express controller 3 @ ef008000 is not used.
-	 * This would have been pci0 on other mpc85xx platforms.
-	 */
-
-	/* PCI Express controller 2, wired to VPX P1,P2 backplane */
-	pci1: pcie@ef009000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xef009000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0 0x0 0x0 0x1 &mpic 0x4 0x1
-			0x0 0x0 0x0 0x2 &mpic 0x5 0x1
-			0x0 0x0 0x0 0x3 &mpic 0x6 0x1
-			0x0 0x0 0x0 0x4 &mpic 0x7 0x1
-			>;
-		pcie@0 {
-			reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x10000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	/* PCI Express controller 1, wired to PEX8518 PCIe switch */
-	pci2: pcie@ef00a000 {
-		compatible = "fsl,mpc8548-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0 0xef00a000 0 0x1000>;
-		bus-range = <0 255>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
-			  0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0 0x0 0x0 0x4 &mpic 0x3 0x1
-			>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x40000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
diff --git a/src/powerpc/yosemite.dts b/src/powerpc/yosemite.dts
deleted file mode 100644
index 30bb4753577a..000000000000
--- a/src/powerpc/yosemite.dts
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * Device Tree Source for AMCC Yosemite
- *
- * Copyright 2008 IBM Corp.
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	model = "amcc,yosemite";
-	compatible = "amcc,yosemite";
-	dcr-parent = <&{/cpus/cpu@0}>;
-
-	aliases {
-		ethernet0 = &EMAC0;
-		ethernet1 = &EMAC1;
-		serial0 = &UART0;
-		serial1 = &UART1;
-		serial2 = &UART2;
-		serial3 = &UART3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,440EP";
-			reg = <0x00000000>;
-			clock-frequency = <0>; /* Filled in by zImage */
-			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-			dcr-controller;
-			dcr-access-method = "native";
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
-	};
-
-	UIC0: interrupt-controller0 {
-		compatible = "ibm,uic-440ep","ibm,uic";
-		interrupt-controller;
-		cell-index = <0>;
-		dcr-reg = <0x0c0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-	};
-
-	UIC1: interrupt-controller1 {
-		compatible = "ibm,uic-440ep","ibm,uic";
-		interrupt-controller;
-		cell-index = <1>;
-		dcr-reg = <0x0d0 0x009>;
-		#address-cells = <0>;
-		#size-cells = <0>;
-		#interrupt-cells = <2>;
-		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
-		interrupt-parent = <&UIC0>;
-	};
-
-	SDR0: sdr {
-		compatible = "ibm,sdr-440ep";
-		dcr-reg = <0x00e 0x002>;
-	};
-
-	CPR0: cpr {
-		compatible = "ibm,cpr-440ep";
-		dcr-reg = <0x00c 0x002>;
-	};
-
-	plb {
-		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-		clock-frequency = <0>; /* Filled in by zImage */
-
-		SDRAM0: sdram {
-			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <0x010 0x002>;
-		};
-
-		DMA0: dma {
-			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <0x100 0x027>;
-		};
-
-		MAL0: mcmal {
-			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x062>;
-			num-tx-chans = <4>;
-			num-rx-chans = <2>;
-			interrupt-parent = <&MAL0>;
-			interrupts = <0x0 0x1 0x2 0x3 0x4>;
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
-					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
-					/*SERR*/  0x2 &UIC1 0x0 0x4
-					/*TXDE*/  0x3 &UIC1 0x1 0x4
-					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
-			 * bits.
-			 */
-			ranges = <0x00000000 0x00000000 0x00000000 0x80000000
-			          0x80000000 0x00000000 0x80000000 0x80000000>;
-			interrupt-parent = <&UIC1>;
-			interrupts = <0x7 0x4>;
-			clock-frequency = <0>; /* Filled in by zImage */
-
-			EBC0: ebc {
-				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <0x012 0x002>;
-				#address-cells = <2>;
-				#size-cells = <1>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <0x5 0x1>;
-				interrupt-parent = <&UIC1>;
-
-				nor_flash@0,0 {
-					compatible = "amd,s29gl256n", "cfi-flash";
-					bank-width = <2>;
-					reg = <0x00000000 0x00000000 0x04000000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0x00000000 0x001e0000>;
-					};
-					partition@1e0000 {
-						label = "dtb";
-						reg = <0x001e0000 0x00020000>;
-					};
-					partition@200000 {
-						label = "ramdisk";
-						reg = <0x00200000 0x01400000>;
-					};
-					partition@1600000 {
-						label = "jffs2";
-						reg = <0x01600000 0x00400000>;
-					};
-					partition@1a00000 {
-						label = "user";
-						reg = <0x01a00000 0x02540000>;
-					};
-					partition@3f40000 {
-						label = "env";
-						reg = <0x03f40000 0x00040000>;
-					};
-					partition@3f80000 {
-						label = "u-boot";
-						reg = <0x03f80000 0x00080000>;
-					};
-				};
-			};
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x00000008>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <115200>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x0 0x4>;
-			};
-
-			UART1: serial@ef600400 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600400 0x00000008>;
-				virtual-reg = <0xef600400>;
-				clock-frequency = <0>;
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x1 0x4>;
-			};
-
-			UART2: serial@ef600500 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600500 0x00000008>;
-				virtual-reg = <0xef600500>;
-				clock-frequency = <0>;
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x3 0x4>;
-				status = "disabled";
-			};
-
-			UART3: serial@ef600600 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600600 0x00000008>;
-				virtual-reg = <0xef600600>;
-				clock-frequency = <0>;
-				current-speed = <0>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x4 0x4>;
-				status = "disabled";
-			};
-
-			IIC0: i2c@ef600700 {
-				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <0xef600700 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x2 0x4>;
-			};
-
-			IIC1: i2c@ef600800 {
-				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <0xef600800 0x00000014>;
-				interrupt-parent = <&UIC0>;
-				interrupts = <0x7 0x4>;
-			};
-
-			spi@ef600900 {
-				compatible = "amcc,spi-440ep";
-				reg = <0xef600900 0x00000006>;
-				interrupts = <0x8 0x4>;
-				interrupt-parent = <&UIC0>;
-			};
-
-			ZMII0: emac-zmii@ef600d00 {
-				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <0xef600d00 0x0000000c>;
-			};
-
-			EMAC0: ethernet@ef600e00 {
-				device_type = "network";
-				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1c 0x4 0x1d 0x4>;
-				reg = <0xef600e00 0x00000070>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <0 1>;
-				mal-rx-channel = <0>;
-				cell-index = <0>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <0>;
-			};
-
-			EMAC1: ethernet@ef600f00 {
-				device_type = "network";
-				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
-				interrupt-parent = <&UIC1>;
-				interrupts = <0x1e 0x4 0x1f 0x4>;
-				reg = <0xef600f00 0x00000070>;
-				local-mac-address = [000000000000];
-				mal-device = <&MAL0>;
-				mal-tx-channel = <2 3>;
-				mal-rx-channel = <1>;
-				cell-index = <1>;
-				max-frame-size = <1500>;
-				rx-fifo-size = <4096>;
-				tx-fifo-size = <2048>;
-				phy-mode = "rmii";
-				phy-map = <0x00000000>;
-				zmii-device = <&ZMII0>;
-				zmii-channel = <1>;
-			};
-
-			usb@ef601000 {
-				compatible = "ohci-be";
-				reg = <0xef601000 0x00000080>;
-				interrupts = <0x8 0x4 0x9 0x4>;
-				interrupt-parent = < &UIC1 >;
-			};
-		};
-
-		PCI0: pci@ec000000 {
-			device_type = "pci";
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
-			primary;
-			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
-			       0x00000000 0xeed00000 0x00000004	/* IACK */
-			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
-			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
-
-			/* Outbound ranges, one memory and one IO,
-			 * later cannot be changed. Chip supports a second
-			 * IO range but we don't use it for now
-			 */
-			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
-				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
-
-			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
-
-			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
-			interrupt-map = <
-				/* IDSEL 12 */
-				0x6000 0x0 0x0 0x0 &UIC0 0x19 0x8
-			>;
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};
diff --git a/src/x86/falconfalls.dts b/src/x86/falconfalls.dts
deleted file mode 100644
index ce874f872cc6..000000000000
--- a/src/x86/falconfalls.dts
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * CE4100 on Falcon Falls
- *
- * (c) Copyright 2010 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; version 2 of the License.
- */
-/dts-v1/;
-/ {
-	model = "intel,falconfalls";
-	compatible = "intel,falconfalls";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "intel,ce4100";
-			reg = <0>;
-			lapic = <&lapic0>;
-		};
-	};
-
-	soc@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "intel,ce4100-cp";
-		ranges;
-
-		ioapic1: interrupt-controller@fec00000 {
-			#interrupt-cells = <2>;
-			compatible = "intel,ce4100-ioapic";
-			interrupt-controller;
-			reg = <0xfec00000 0x1000>;
-		};
-
-		timer@fed00000 {
-			compatible = "intel,ce4100-hpet";
-			reg = <0xfed00000 0x200>;
-		};
-
-		lapic0: interrupt-controller@fee00000 {
-			compatible = "intel,ce4100-lapic";
-			reg = <0xfee00000 0x1000>;
-		};
-
-		pci@3fc {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			compatible = "intel,ce4100-pci", "pci";
-			device_type = "pci";
-			bus-range = <0 0>;
-			ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000
-				  0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000
-				  0x0000000 0 0x0	 0x0	    0 0x100>;
-
-			/* Secondary IO-APIC */
-			ioapic2: interrupt-controller@0,1 {
-				#interrupt-cells = <2>;
-				compatible = "intel,ce4100-ioapic";
-				interrupt-controller;
-				reg = <0x100 0x0 0x0 0x0 0x0>;
-				assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>;
-			};
-
-			pci@1,0 {
-				#address-cells = <3>;
-				#size-cells = <2>;
-				compatible = "intel,ce4100-pci", "pci";
-				device_type = "pci";
-				bus-range = <1 1>;
-				reg = <0x0800 0x0 0x0 0x0 0x0>;
-				ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>;
-
-				interrupt-parent = <&ioapic2>;
-
-				display@2,0 {
-					compatible = "pci8086,2e5b.2",
-						   "pci8086,2e5b",
-						   "pciclass038000",
-						   "pciclass0380";
-
-					reg = <0x11000 0x0 0x0 0x0 0x0>;
-					interrupts = <0 1>;
-				};
-
-				multimedia@3,0 {
-					compatible = "pci8086,2e5c.2",
-						   "pci8086,2e5c",
-						   "pciclass048000",
-						   "pciclass0480";
-
-					reg = <0x11800 0x0 0x0 0x0 0x0>;
-					interrupts = <2 1>;
-				};
-
-				multimedia@4,0 {
-					compatible = "pci8086,2e5d.2",
-						   "pci8086,2e5d",
-						   "pciclass048000",
-						   "pciclass0480";
-
-					reg = <0x12000 0x0 0x0 0x0 0x0>;
-					interrupts = <4 1>;
-				};
-
-				multimedia@4,1 {
-					compatible = "pci8086,2e5e.2",
-						   "pci8086,2e5e",
-						   "pciclass048000",
-						   "pciclass0480";
-
-					reg = <0x12100 0x0 0x0 0x0 0x0>;
-					interrupts = <5 1>;
-				};
-
-				sound@6,0 {
-					compatible = "pci8086,2e5f.2",
-						   "pci8086,2e5f",
-						   "pciclass040100",
-						   "pciclass0401";
-
-					reg = <0x13000 0x0 0x0 0x0 0x0>;
-					interrupts = <6 1>;
-				};
-
-				sound@6,1 {
-					compatible = "pci8086,2e5f.2",
-						   "pci8086,2e5f",
-						   "pciclass040100",
-						   "pciclass0401";
-
-					reg = <0x13100 0x0 0x0 0x0 0x0>;
-					interrupts = <7 1>;
-				};
-
-				sound@6,2 {
-					compatible = "pci8086,2e60.2",
-						   "pci8086,2e60",
-						   "pciclass040100",
-						   "pciclass0401";
-
-					reg = <0x13200 0x0 0x0 0x0 0x0>;
-					interrupts = <8 1>;
-				};
-
-				display@8,0 {
-					compatible = "pci8086,2e61.2",
-						   "pci8086,2e61",
-						   "pciclass038000",
-						   "pciclass0380";
-
-					reg = <0x14000 0x0 0x0 0x0 0x0>;
-					interrupts = <9 1>;
-				};
-
-				display@8,1 {
-					compatible = "pci8086,2e62.2",
-						   "pci8086,2e62",
-						   "pciclass038000",
-						   "pciclass0380";
-
-					reg = <0x14100 0x0 0x0 0x0 0x0>;
-					interrupts = <10 1>;
-				};
-
-				multimedia@8,2 {
-					compatible = "pci8086,2e63.2",
-						   "pci8086,2e63",
-						   "pciclass048000",
-						   "pciclass0480";
-
-					reg = <0x14200 0x0 0x0 0x0 0x0>;
-					interrupts = <11 1>;
-				};
-
-				entertainment-encryption@9,0 {
-					compatible = "pci8086,2e64.2",
-						   "pci8086,2e64",
-						   "pciclass101000",
-						   "pciclass1010";
-
-					reg = <0x14800 0x0 0x0 0x0 0x0>;
-					interrupts = <12 1>;
-				};
-
-				localbus@a,0 {
-					compatible = "pci8086,2e65.2",
-						   "pci8086,2e65",
-						   "pciclassff0000",
-						   "pciclassff00";
-
-					reg = <0x15000 0x0 0x0 0x0 0x0>;
-				};
-
-				serial@b,0 {
-					compatible = "pci8086,2e66.2",
-						   "pci8086,2e66",
-						   "pciclass070003",
-						   "pciclass0700";
-
-					reg = <0x15800 0x0 0x0 0x0 0x0>;
-					interrupts = <14 1>;
-				};
-
-				pcigpio: gpio@b,1 {
-					#gpio-cells = <2>;
-					#interrupt-cells = <2>;
-					compatible = "pci8086,2e67.2",
-						   "pci8086,2e67",
-						   "pciclassff0000",
-						   "pciclassff00";
-
-					reg = <0x15900 0x0 0x0 0x0 0x0>;
-					interrupts = <15 1>;
-					interrupt-controller;
-					gpio-controller;
-					intel,muxctl = <0>;
-				};
-
-				i2c-controller@b,2 {
-					#address-cells = <2>;
-					#size-cells = <1>;
-					compatible = "pci8086,2e68.2",
-						   "pci8086,2e68",
-						   "pciclass,ff0000",
-						   "pciclass,ff00";
-
-					reg = <0x15a00 0x0 0x0 0x0 0x0>;
-					interrupts = <16 1>;
-					ranges = <0 0	0x02000000 0 0xdffe0500	0x100
-						  1 0	0x02000000 0 0xdffe0600	0x100
-						  2 0	0x02000000 0 0xdffe0700	0x100>;
-
-					i2c@0 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						compatible = "intel,ce4100-i2c-controller";
-						reg = <0 0 0x100>;
-					};
-
-					i2c@1 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						compatible = "intel,ce4100-i2c-controller";
-						reg = <1 0 0x100>;
-
-						gpio@26 {
-							#gpio-cells = <2>;
-							compatible = "ti,pcf8575";
-							reg = <0x26>;
-							gpio-controller;
-						};
-					};
-
-					i2c@2 {
-						#address-cells = <1>;
-						#size-cells = <0>;
-						compatible = "intel,ce4100-i2c-controller";
-						reg = <2 0 0x100>;
-
-						gpio@26 {
-							#gpio-cells = <2>;
-							compatible = "ti,pcf8575";
-							reg = <0x26>;
-							gpio-controller;
-						};
-					};
-				};
-
-				smard-card@b,3 {
-					compatible = "pci8086,2e69.2",
-						   "pci8086,2e69",
-						   "pciclass070500",
-						   "pciclass0705";
-
-					reg = <0x15b00 0x0 0x0 0x0 0x0>;
-					interrupts = <15 1>;
-				};
-
-				spi-controller@b,4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible =
-						"pci8086,2e6a.2",
-						"pci8086,2e6a",
-						"pciclass,ff0000",
-						"pciclass,ff00";
-
-					reg = <0x15c00 0x0 0x0 0x0 0x0>;
-					interrupts = <15 1>;
-
-					dac@0 {
-						compatible = "ti,pcm1755";
-						reg = <0>;
-						spi-max-frequency = <115200>;
-					};
-
-					dac@1 {
-						compatible = "ti,pcm1609a";
-						reg = <1>;
-						spi-max-frequency = <115200>;
-					};
-
-					eeprom@2 {
-						compatible = "atmel,at93c46";
-						reg = <2>;
-						spi-max-frequency = <115200>;
-					};
-				};
-
-				multimedia@b,7 {
-					compatible = "pci8086,2e6d.2",
-						   "pci8086,2e6d",
-						   "pciclassff0000",
-						   "pciclassff00";
-
-					reg = <0x15f00 0x0 0x0 0x0 0x0>;
-				};
-
-				ethernet@c,0 {
-					compatible = "pci8086,2e6e.2",
-						   "pci8086,2e6e",
-						   "pciclass020000",
-						   "pciclass0200";
-
-					reg = <0x16000 0x0 0x0 0x0 0x0>;
-					interrupts = <21 1>;
-				};
-
-				clock@c,1 {
-					compatible = "pci8086,2e6f.2",
-						   "pci8086,2e6f",
-						   "pciclassff0000",
-						   "pciclassff00";
-
-					reg = <0x16100 0x0 0x0 0x0 0x0>;
-					interrupts = <3 1>;
-				};
-
-				usb@d,0 {
-					compatible = "pci8086,2e70.2",
-						   "pci8086,2e70",
-						   "pciclass0c0320",
-						   "pciclass0c03";
-
-					reg = <0x16800 0x0 0x0 0x0 0x0>;
-					interrupts = <22 1>;
-				};
-
-				usb@d,1 {
-					compatible = "pci8086,2e70.2",
-						   "pci8086,2e70",
-						   "pciclass0c0320",
-						   "pciclass0c03";
-
-					reg = <0x16900 0x0 0x0 0x0 0x0>;
-					interrupts = <22 1>;
-				};
-
-				sata@e,0 {
-					compatible = "pci8086,2e71.0",
-						   "pci8086,2e71",
-						   "pciclass010601",
-						   "pciclass0106";
-
-					reg = <0x17000 0x0 0x0 0x0 0x0>;
-					interrupts = <23 1>;
-				};
-
-				flash@f,0 {
-					compatible = "pci8086,701.1",
-						   "pci8086,701",
-						   "pciclass050100",
-						   "pciclass0501";
-
-					reg = <0x17800 0x0 0x0 0x0 0x0>;
-					interrupts = <13 1>;
-				};
-
-				entertainment-encryption@10,0 {
-					compatible = "pci8086,702.1",
-						   "pci8086,702",
-						   "pciclass101000",
-						   "pciclass1010";
-
-					reg = <0x18000 0x0 0x0 0x0 0x0>;
-				};
-
-				co-processor@11,0 {
-					compatible = "pci8086,703.1",
-						   "pci8086,703",
-						   "pciclass0b4000",
-						   "pciclass0b40";
-
-					reg = <0x18800 0x0 0x0 0x0 0x0>;
-					interrupts = <1 1>;
-				};
-
-				multimedia@12,0 {
-					compatible = "pci8086,704.0",
-						   "pci8086,704",
-						   "pciclass048000",
-						   "pciclass0480";
-
-					reg = <0x19000 0x0 0x0 0x0 0x0>;
-				};
-			};
-
-			isa@1f,0 {
-				#address-cells = <2>;
-				#size-cells = <1>;
-				compatible = "isa";
-				reg = <0xf800 0x0 0x0 0x0 0x0>;
-				ranges = <1 0 0 0 0 0x100>;
-
-				rtc@70 {
-					compatible = "intel,ce4100-rtc", "motorola,mc146818";
-					interrupts = <8 3>;
-					interrupt-parent = <&ioapic1>;
-					ctrl-reg = <2>;
-					freq-reg = <0x26>;
-					reg = <1 0x70 2>;
-				};
-			};
-		};
-	};
-};
diff --git a/src/xtensa/kc705.dts b/src/xtensa/kc705.dts
deleted file mode 100644
index 742a347be67a..000000000000
--- a/src/xtensa/kc705.dts
+++ /dev/null
@@ -1,11 +0,0 @@
-/dts-v1/;
-/include/ "xtfpga.dtsi"
-/include/ "xtfpga-flash-128m.dtsi"
-
-/ {
-	compatible = "cdns,xtensa-kc705";
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-};
diff --git a/src/xtensa/lx60.dts b/src/xtensa/lx60.dts
deleted file mode 100644
index a0f8b8ad3920..000000000000
--- a/src/xtensa/lx60.dts
+++ /dev/null
@@ -1,11 +0,0 @@
-/dts-v1/;
-/include/ "xtfpga.dtsi"
-/include/ "xtfpga-flash-4m.dtsi"
-
-/ {
-	compatible = "cdns,xtensa-lx60";
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;
-	};
-};
diff --git a/src/xtensa/ml605.dts b/src/xtensa/ml605.dts
deleted file mode 100644
index 905c3a5035e9..000000000000
--- a/src/xtensa/ml605.dts
+++ /dev/null
@@ -1,11 +0,0 @@
-/dts-v1/;
-/include/ "xtfpga.dtsi"
-/include/ "xtfpga-flash-16m.dtsi"
-
-/ {
-	compatible = "cdns,xtensa-ml605";
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-};
diff --git a/src/xtensa/xtfpga-flash-128m.dtsi b/src/xtensa/xtfpga-flash-128m.dtsi
deleted file mode 100644
index d3a88e029873..000000000000
--- a/src/xtensa/xtfpga-flash-128m.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-/ {
-	soc {
-		flash: flash@00000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x00000000 0x08000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			partition@0x0 {
-				label = "data";
-				reg = <0x00000000 0x06000000>;
-			};
-			partition@0x6000000 {
-				label = "boot loader area";
-				reg = <0x06000000 0x00800000>;
-			};
-			partition@0x6800000 {
-				label = "kernel image";
-				reg = <0x06800000 0x017e0000>;
-			};
-			partition@0x7fe0000 {
-				label = "boot environment";
-				reg = <0x07fe0000 0x00020000>;
-			};
-		};
-        };
-};
diff --git a/src/xtensa/xtfpga-flash-16m.dtsi b/src/xtensa/xtfpga-flash-16m.dtsi
deleted file mode 100644
index 1d97203c18e7..000000000000
--- a/src/xtensa/xtfpga-flash-16m.dtsi
+++ /dev/null
@@ -1,28 +0,0 @@
-/ {
-	soc {
-		flash: flash@08000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x08000000 0x01000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			partition@0x0 {
-				label = "boot loader area";
-				reg = <0x00000000 0x00400000>;
-			};
-			partition@0x400000 {
-				label = "kernel image";
-				reg = <0x00400000 0x00600000>;
-			};
-			partition@0xa00000 {
-				label = "data";
-				reg = <0x00a00000 0x005e0000>;
-			};
-			partition@0xfe0000 {
-				label = "boot environment";
-				reg = <0x00fe0000 0x00020000>;
-			};
-		};
-	};
-};
diff --git a/src/xtensa/xtfpga-flash-4m.dtsi b/src/xtensa/xtfpga-flash-4m.dtsi
deleted file mode 100644
index d1c621ca8be1..000000000000
--- a/src/xtensa/xtfpga-flash-4m.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-/ {
-	soc {
-		flash: flash@08000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x08000000 0x00400000>;
-			bank-width = <2>;
-			device-width = <2>;
-			partition@0x0 {
-				label = "boot loader area";
-				reg = <0x00000000 0x003f0000>;
-			};
-			partition@0x3f0000 {
-				label = "boot environment";
-				reg = <0x003f0000 0x00010000>;
-			};
-		};
-	};
-};
diff --git a/src/xtensa/xtfpga.dtsi b/src/xtensa/xtfpga.dtsi
deleted file mode 100644
index dec9178840f6..000000000000
--- a/src/xtensa/xtfpga.dtsi
+++ /dev/null
@@ -1,69 +0,0 @@
-/ {
-	compatible = "cdns,xtensa-xtfpga";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&pic>;
-
-	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x06000000>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "cdns,xtensa-cpu";
-			reg = <0>;
-			/* Filled in by platform_setup from FPGA register
-			 * clock-frequency = <100000000>;
-			 */
-		};
-	};
-
-	pic: pic {
-		compatible = "cdns,xtensa-pic";
-		/* one cell: internal irq number,
-		 * two cells: second cell == 0: internal irq number
-		 *            second cell == 1: external irq number
-		 */
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	clocks {
-		osc: main-oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf0000000 0x10000000>;
-
-		serial0: serial@0d050020 {
-			device_type = "serial";
-			compatible = "ns16550a";
-			no-loopback-test;
-			reg = <0x0d050020 0x20>;
-			reg-shift = <2>;
-			interrupts = <0 1>; /* external irq 0 */
-			clocks = <&osc>;
-		};
-
-		enet0: ethoc@0d030000 {
-			compatible = "opencores,ethoc";
-			reg = <0x0d030000 0x4000 0x0d800000 0x4000>;
-			interrupts = <1 1>; /* external irq 1 */
-			local-mac-address = [00 50 c2 13 6f 00];
-			clocks = <&osc>;
-		};
-	};
-};