Import OpenSSL 1.0.1c.vendor/openssl/1.0.1c

Approved by:	benl (maintainer)

1380 files changed, 167735 insertions, 79797 deletions

diff --git a/CHANGES b/CHANGES
index e914a426ed4c..7013e4c12c0f 100644
--- a/CHANGES
+++ b/CHANGES
@@ -2,10 +2,10 @@
  OpenSSL CHANGES
  _______________
 
- Changes between 0.9.8w and 0.9.8x [10 May 2012]
+ Changes between 1.0.1b and 1.0.1c [10 May 2012]
 
-  *) Sanity check record length before skipping explicit IV in DTLS
-     to fix DoS attack.
+  *) Sanity check record length before skipping explicit IV in TLS
+     1.2, 1.1 and DTLS to fix DoS attack.
 
      Thanks to Codenomicon for discovering this issue using Fuzz-o-Matic
      fuzzing as a service testing platform.
@@ -16,15 +16,34 @@
      Thanks to Solar Designer of Openwall for reporting this issue.
      [Steve Henson]
 
- Changes between 0.9.8v and 0.9.8w [23 Apr 2012]
+  *) In FIPS mode don't try to use composite ciphers as they are not
+     approved.
+     [Steve Henson]
 
-  *) The fix for CVE-2012-2110 did not take into account that the 
-     'len' argument to BUF_MEM_grow and BUF_MEM_grow_clean is an
-     int in OpenSSL 0.9.8, making it still vulnerable. Fix by 
-     rejecting negative len parameter. (CVE-2012-2131)
-     [Tomas Hoger <thoger@redhat.com>]
+ Changes between 1.0.1a and 1.0.1b [26 Apr 2012]
 
- Changes between 0.9.8u and 0.9.8v [19 Apr 2012]
+  *) OpenSSL 1.0.0 sets SSL_OP_ALL to 0x80000FFFL and OpenSSL 1.0.1 and
+     1.0.1a set SSL_OP_NO_TLSv1_1 to 0x00000400L which would unfortunately
+     mean any application compiled against OpenSSL 1.0.0 headers setting
+     SSL_OP_ALL would also set SSL_OP_NO_TLSv1_1, unintentionally disablng
+     TLS 1.1 also. Fix this by changing the value of SSL_OP_NO_TLSv1_1 to
+     0x10000000L Any application which was previously compiled against
+     OpenSSL 1.0.1 or 1.0.1a headers and which cares about SSL_OP_NO_TLSv1_1
+     will need to be recompiled as a result. Letting be results in
+     inability to disable specifically TLS 1.1 and in client context,
+     in unlike event, limit maximum offered version to TLS 1.0 [see below].
+     [Steve Henson]
+
+  *) In order to ensure interoperabilty SSL_OP_NO_protocolX does not
+     disable just protocol X, but all protocols above X *if* there are
+     protocols *below* X still enabled. In more practical terms it means
+     that if application wants to disable TLS1.0 in favor of TLS1.1 and
+     above, it's not sufficient to pass SSL_OP_NO_TLSv1, one has to pass
+     SSL_OP_NO_TLSv1|SSL_OP_NO_SSLv3|SSL_OP_NO_SSLv2. This applies to
+     client side.
+     [Andy Polyakov]
+
+ Changes between 1.0.1 and 1.0.1a [19 Apr 2012]
 
   *) Check for potentially exploitable overflows in asn1_d2i_read_bio
      BUF_mem_grow and BUF_mem_grow_clean. Refuse attempts to shrink buffer
@@ -35,7 +54,310 @@
      (CVE-2012-2110)
      [Adam Langley (Google), Tavis Ormandy, Google Security Team]
 
- Changes between 0.9.8t and 0.9.8u [12 Mar 2012]
+  *) Don't allow TLS 1.2 SHA-256 ciphersuites in TLS 1.0, 1.1 connections.
+     [Adam Langley]
+
+  *) Workarounds for some broken servers that "hang" if a client hello
+     record length exceeds 255 bytes.
+
+     1. Do not use record version number > TLS 1.0 in initial client
+        hello: some (but not all) hanging servers will now work.
+     2. If we set OPENSSL_MAX_TLS1_2_CIPHER_LENGTH this will truncate
+	the number of ciphers sent in the client hello. This should be
+        set to an even number, such as 50, for example by passing:
+        -DOPENSSL_MAX_TLS1_2_CIPHER_LENGTH=50 to config or Configure.
+        Most broken servers should now work.
+     3. If all else fails setting OPENSSL_NO_TLS1_2_CLIENT will disable
+	TLS 1.2 client support entirely.
+     [Steve Henson]
+
+  *) Fix SEGV in Vector Permutation AES module observed in OpenSSH.
+     [Andy Polyakov]
+
+ Changes between 1.0.0h and 1.0.1  [14 Mar 2012]
+
+  *) Add compatibility with old MDC2 signatures which use an ASN1 OCTET
+     STRING form instead of a DigestInfo.
+     [Steve Henson]
+
+  *) The format used for MDC2 RSA signatures is inconsistent between EVP
+     and the RSA_sign/RSA_verify functions. This was made more apparent when
+     OpenSSL used RSA_sign/RSA_verify for some RSA signatures in particular
+     those which went through EVP_PKEY_METHOD in 1.0.0 and later. Detect 
+     the correct format in RSA_verify so both forms transparently work.
+     [Steve Henson]
+
+  *) Some servers which support TLS 1.0 can choke if we initially indicate
+     support for TLS 1.2 and later renegotiate using TLS 1.0 in the RSA
+     encrypted premaster secret. As a workaround use the maximum pemitted
+     client version in client hello, this should keep such servers happy
+     and still work with previous versions of OpenSSL.
+     [Steve Henson]
+
+  *) Add support for TLS/DTLS heartbeats.
+     [Robin Seggelmann <seggelmann@fh-muenster.de>]
+
+  *) Add support for SCTP.
+     [Robin Seggelmann <seggelmann@fh-muenster.de>]
+
+  *) Improved PRNG seeding for VOS.
+     [Paul Green <Paul.Green@stratus.com>]
+
+  *) Extensive assembler packs updates, most notably:
+
+	- x86[_64]:     AES-NI, PCLMULQDQ, RDRAND support;
+	- x86[_64]:     SSSE3 support (SHA1, vector-permutation AES);
+	- x86_64:       bit-sliced AES implementation;
+	- ARM:          NEON support, contemporary platforms optimizations;
+	- s390x:        z196 support;
+	- *:            GHASH and GF(2^m) multiplication implementations;
+
+     [Andy Polyakov]
+
+  *) Make TLS-SRP code conformant with RFC 5054 API cleanup
+     (removal of unnecessary code)
+     [Peter Sylvester <peter.sylvester@edelweb.fr>]
+
+  *) Add TLS key material exporter from RFC 5705.
+     [Eric Rescorla]
+
+  *) Add DTLS-SRTP negotiation from RFC 5764.
+     [Eric Rescorla]
+
+  *) Add Next Protocol Negotiation,
+     http://tools.ietf.org/html/draft-agl-tls-nextprotoneg-00. Can be
+     disabled with a no-npn flag to config or Configure. Code donated
+     by Google.
+     [Adam Langley <agl@google.com> and Ben Laurie]
+
+  *) Add optional 64-bit optimized implementations of elliptic curves NIST-P224,
+     NIST-P256, NIST-P521, with constant-time single point multiplication on
+     typical inputs. Compiler support for the nonstandard type __uint128_t is
+     required to use this (present in gcc 4.4 and later, for 64-bit builds).
+     Code made available under Apache License version 2.0.
+
+     Specify "enable-ec_nistp_64_gcc_128" on the Configure (or config) command
+     line to include this in your build of OpenSSL, and run "make depend" (or
+     "make update"). This enables the following EC_METHODs:
+
+         EC_GFp_nistp224_method()
+         EC_GFp_nistp256_method()
+         EC_GFp_nistp521_method()
+
+     EC_GROUP_new_by_curve_name() will automatically use these (while
+     EC_GROUP_new_curve_GFp() currently prefers the more flexible
+     implementations).
+     [Emilia Käsper, Adam Langley, Bodo Moeller (Google)]
+
+  *) Use type ossl_ssize_t instad of ssize_t which isn't available on
+     all platforms. Move ssize_t definition from e_os.h to the public
+     header file e_os2.h as it now appears in public header file cms.h
+     [Steve Henson]
+
+  *) New -sigopt option to the ca, req and x509 utilities. Additional
+     signature parameters can be passed using this option and in
+     particular PSS. 
+     [Steve Henson]
+
+  *) Add RSA PSS signing function. This will generate and set the
+     appropriate AlgorithmIdentifiers for PSS based on those in the
+     corresponding EVP_MD_CTX structure. No application support yet.
+     [Steve Henson]
+
+  *) Support for companion algorithm specific ASN1 signing routines.
+     New function ASN1_item_sign_ctx() signs a pre-initialised
+     EVP_MD_CTX structure and sets AlgorithmIdentifiers based on
+     the appropriate parameters.
+     [Steve Henson]
+
+  *) Add new algorithm specific ASN1 verification initialisation function
+     to EVP_PKEY_ASN1_METHOD: this is not in EVP_PKEY_METHOD since the ASN1
+     handling will be the same no matter what EVP_PKEY_METHOD is used.
+     Add a PSS handler to support verification of PSS signatures: checked
+     against a number of sample certificates.
+     [Steve Henson]
+
+  *) Add signature printing for PSS. Add PSS OIDs.
+     [Steve Henson, Martin Kaiser <lists@kaiser.cx>]
+
+  *) Add algorithm specific signature printing. An individual ASN1 method
+     can now print out signatures instead of the standard hex dump. 
+
+     More complex signatures (e.g. PSS) can print out more meaningful
+     information. Include DSA version that prints out the signature
+     parameters r, s.
+     [Steve Henson]
+
+  *) Password based recipient info support for CMS library: implementing
+     RFC3211.
+     [Steve Henson]
+
+  *) Split password based encryption into PBES2 and PBKDF2 functions. This
+     neatly separates the code into cipher and PBE sections and is required
+     for some algorithms that split PBES2 into separate pieces (such as
+     password based CMS).
+     [Steve Henson]
+
+  *) Session-handling fixes:
+     - Fix handling of connections that are resuming with a session ID,
+       but also support Session Tickets.
+     - Fix a bug that suppressed issuing of a new ticket if the client
+       presented a ticket with an expired session.
+     - Try to set the ticket lifetime hint to something reasonable.
+     - Make tickets shorter by excluding irrelevant information.
+     - On the client side, don't ignore renewed tickets.
+     [Adam Langley, Bodo Moeller (Google)]
+
+  *) Fix PSK session representation.
+     [Bodo Moeller]
+
+  *) Add RC4-MD5 and AESNI-SHA1 "stitched" implementations.
+
+     This work was sponsored by Intel.
+     [Andy Polyakov]
+
+  *) Add GCM support to TLS library. Some custom code is needed to split
+     the IV between the fixed (from PRF) and explicit (from TLS record)
+     portions. This adds all GCM ciphersuites supported by RFC5288 and 
+     RFC5289. Generalise some AES* cipherstrings to inlclude GCM and
+     add a special AESGCM string for GCM only.
+     [Steve Henson]
+
+  *) Expand range of ctrls for AES GCM. Permit setting invocation
+     field on decrypt and retrieval of invocation field only on encrypt.
+     [Steve Henson]
+
+  *) Add HMAC ECC ciphersuites from RFC5289. Include SHA384 PRF support.
+     As required by RFC5289 these ciphersuites cannot be used if for
+     versions of TLS earlier than 1.2.
+     [Steve Henson]
+
+  *) For FIPS capable OpenSSL interpret a NULL default public key method
+     as unset and return the appopriate default but do *not* set the default.
+     This means we can return the appopriate method in applications that
+     swicth between FIPS and non-FIPS modes.
+     [Steve Henson]
+
+  *) Redirect HMAC and CMAC operations to FIPS module in FIPS mode. If an
+     ENGINE is used then we cannot handle that in the FIPS module so we
+     keep original code iff non-FIPS operations are allowed.
+     [Steve Henson]
+
+  *) Add -attime option to openssl utilities.
+     [Peter Eckersley <pde@eff.org>, Ben Laurie and Steve Henson]
+
+  *) Redirect DSA and DH operations to FIPS module in FIPS mode.
+     [Steve Henson]
+
+  *) Redirect ECDSA and ECDH operations to FIPS module in FIPS mode. Also use
+     FIPS EC methods unconditionally for now.
+     [Steve Henson]
+
+  *) New build option no-ec2m to disable characteristic 2 code.
+     [Steve Henson]
+
+  *) Backport libcrypto audit of return value checking from 1.1.0-dev; not
+     all cases can be covered as some introduce binary incompatibilities.
+     [Steve Henson]
+
+  *) Redirect RSA operations to FIPS module including keygen,
+     encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
+     [Steve Henson]
+
+  *) Add similar low level API blocking to ciphers.
+     [Steve Henson]
+
+  *) Low level digest APIs are not approved in FIPS mode: any attempt
+     to use these will cause a fatal error. Applications that *really* want
+     to use them can use the private_* version instead.
+     [Steve Henson]
+
+  *) Redirect cipher operations to FIPS module for FIPS builds. 
+     [Steve Henson]
+
+  *) Redirect digest operations to FIPS module for FIPS builds. 
+     [Steve Henson]
+
+  *) Update build system to add "fips" flag which will link in fipscanister.o
+     for static and shared library builds embedding a signature if needed.
+     [Steve Henson]
+
+  *) Output TLS supported curves in preference order instead of numerical
+     order. This is currently hardcoded for the highest order curves first.
+     This should be configurable so applications can judge speed vs strength.
+     [Steve Henson]
+
+  *) Add TLS v1.2 server support for client authentication. 
+     [Steve Henson]
+
+  *) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
+     and enable MD5.
+     [Steve Henson]
+
+  *) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
+     FIPS modules versions.
+     [Steve Henson]
+
+  *) Add TLS v1.2 client side support for client authentication. Keep cache
+     of handshake records longer as we don't know the hash algorithm to use
+     until after the certificate request message is received.
+     [Steve Henson]
+
+  *) Initial TLS v1.2 client support. Add a default signature algorithms
+     extension including all the algorithms we support. Parse new signature
+     format in client key exchange. Relax some ECC signing restrictions for
+     TLS v1.2 as indicated in RFC5246.
+     [Steve Henson]
+
+  *) Add server support for TLS v1.2 signature algorithms extension. Switch
+     to new signature format when needed using client digest preference.
+     All server ciphersuites should now work correctly in TLS v1.2. No client
+     support yet and no support for client certificates.
+     [Steve Henson]
+
+  *) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
+     to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
+     ciphersuites. At present only RSA key exchange ciphersuites work with
+     TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
+     SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
+     and version checking.
+     [Steve Henson]
+
+  *) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
+     with this defined it will not be affected by any changes to ssl internal
+     structures. Add several utility functions to allow openssl application
+     to work with OPENSSL_NO_SSL_INTERN defined.
+     [Steve Henson]
+
+  *) Add SRP support.
+     [Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
+
+  *) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
+     [Steve Henson]
+
+  *) Permit abbreviated handshakes when renegotiating using the function
+     SSL_renegotiate_abbreviated().
+     [Robin Seggelmann <seggelmann@fh-muenster.de>]
+
+  *) Add call to ENGINE_register_all_complete() to
+     ENGINE_load_builtin_engines(), so some implementations get used
+     automatically instead of needing explicit application support.
+     [Steve Henson]
+
+  *) Add support for TLS key exporter as described in RFC5705.
+     [Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
+
+  *) Initial TLSv1.1 support. Since TLSv1.1 is very similar to TLS v1.0 only
+     a few changes are required:
+
+       Add SSL_OP_NO_TLSv1_1 flag.
+       Add TLSv1_1 methods.
+       Update version checking logic to handle version 1.1.
+       Add explicit IV handling (ported from DTLS code).
+       Add command line options to s_client/s_server.
+     [Steve Henson]
+
+ Changes between 1.0.0g and 1.0.0h [12 Mar 2012]
 
   *) Fix MMA (Bleichenbacher's attack on PKCS #1 v1.5 RSA padding) weakness
      in CMS and PKCS7 code. When RSA decryption fails use a random key for
@@ -53,7 +375,7 @@
      Ivan Nestlerode <inestlerode@us.ibm.com> for discovering this bug.
      [Steve Henson]
 
- Changes between 0.9.8s and 0.9.8t [18 Jan 2012]
+ Changes between 1.0.0f and 1.0.0g [18 Jan 2012]
 
   *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
      Thanks to Antonio Martin, Enterprise Secure Access Research and
@@ -61,6 +383,978 @@
      preparing a fix. (CVE-2012-0050)
      [Antonio Martin]
 
+ Changes between 1.0.0e and 1.0.0f [4 Jan 2012]
+
+  *) Nadhem Alfardan and Kenny Paterson have discovered an extension
+     of the Vaudenay padding oracle attack on CBC mode encryption
+     which enables an efficient plaintext recovery attack against
+     the OpenSSL implementation of DTLS. Their attack exploits timing
+     differences arising during decryption processing. A research
+     paper describing this attack can be found at:
+                  http://www.isg.rhul.ac.uk/~kp/dtls.pdf
+     Thanks go to Nadhem Alfardan and Kenny Paterson of the Information
+     Security Group at Royal Holloway, University of London
+     (www.isg.rhul.ac.uk) for discovering this flaw and to Robin Seggelmann
+     <seggelmann@fh-muenster.de> and Michael Tuexen <tuexen@fh-muenster.de>
+     for preparing the fix. (CVE-2011-4108)
+     [Robin Seggelmann, Michael Tuexen]
+
+  *) Clear bytes used for block padding of SSL 3.0 records.
+     (CVE-2011-4576)
+     [Adam Langley (Google)]
+
+  *) Only allow one SGC handshake restart for SSL/TLS. Thanks to George
+     Kadianakis <desnacked@gmail.com> for discovering this issue and
+     Adam Langley for preparing the fix. (CVE-2011-4619)
+     [Adam Langley (Google)]
+
+  *) Check parameters are not NULL in GOST ENGINE. (CVE-2012-0027)
+     [Andrey Kulikov <amdeich@gmail.com>]
+
+  *) Prevent malformed RFC3779 data triggering an assertion failure.
+     Thanks to Andrew Chi, BBN Technologies, for discovering the flaw
+     and Rob Austein <sra@hactrn.net> for fixing it. (CVE-2011-4577)
+     [Rob Austein <sra@hactrn.net>]
+
+  *) Improved PRNG seeding for VOS.
+     [Paul Green <Paul.Green@stratus.com>]
+
+  *) Fix ssl_ciph.c set-up race.
+     [Adam Langley (Google)]
+
+  *) Fix spurious failures in ecdsatest.c.
+     [Emilia Käsper (Google)]
+
+  *) Fix the BIO_f_buffer() implementation (which was mixing different
+     interpretations of the '..._len' fields).
+     [Adam Langley (Google)]
+
+  *) Fix handling of BN_BLINDING: now BN_BLINDING_invert_ex (rather than
+     BN_BLINDING_invert_ex) calls BN_BLINDING_update, ensuring that concurrent
+     threads won't reuse the same blinding coefficients.
+
+     This also avoids the need to obtain the CRYPTO_LOCK_RSA_BLINDING
+     lock to call BN_BLINDING_invert_ex, and avoids one use of
+     BN_BLINDING_update for each BN_BLINDING structure (previously,
+     the last update always remained unused).
+     [Emilia Käsper (Google)]
+
+  *) In ssl3_clear, preserve s3->init_extra along with s3->rbuf.
+     [Bob Buckholz (Google)]
+
+ Changes between 1.0.0d and 1.0.0e [6 Sep 2011]
+
+  *) Fix bug where CRLs with nextUpdate in the past are sometimes accepted
+     by initialising X509_STORE_CTX properly. (CVE-2011-3207)
+     [Kaspar Brand <ossl@velox.ch>]
+
+  *) Fix SSL memory handling for (EC)DH ciphersuites, in particular
+     for multi-threaded use of ECDH. (CVE-2011-3210)
+     [Adam Langley (Google)]
+
+  *) Fix x509_name_ex_d2i memory leak on bad inputs.
+     [Bodo Moeller]
+
+  *) Remove hard coded ecdsaWithSHA1 signature tests in ssl code and check
+     signature public key algorithm by using OID xref utilities instead.
+     Before this you could only use some ECC ciphersuites with SHA1 only.
+     [Steve Henson]
+
+  *) Add protection against ECDSA timing attacks as mentioned in the paper
+     by Billy Bob Brumley and Nicola Tuveri, see:
+
+	http://eprint.iacr.org/2011/232.pdf
+
+     [Billy Bob Brumley and Nicola Tuveri]
+
+ Changes between 1.0.0c and 1.0.0d [8 Feb 2011]
+
+  *) Fix parsing of OCSP stapling ClientHello extension. CVE-2011-0014
+     [Neel Mehta, Adam Langley, Bodo Moeller (Google)]
+
+  *) Fix bug in string printing code: if *any* escaping is enabled we must
+     escape the escape character (backslash) or the resulting string is
+     ambiguous.
+     [Steve Henson]
+
+ Changes between 1.0.0b and 1.0.0c  [2 Dec 2010]
+
+  *) Disable code workaround for ancient and obsolete Netscape browsers
+     and servers: an attacker can use it in a ciphersuite downgrade attack.
+     Thanks to Martin Rex for discovering this bug. CVE-2010-4180
+     [Steve Henson]
+
+  *) Fixed J-PAKE implementation error, originally discovered by
+     Sebastien Martini, further info and confirmation from Stefan
+     Arentz and Feng Hao. Note that this fix is a security fix. CVE-2010-4252
+     [Ben Laurie]
+
+ Changes between 1.0.0a and 1.0.0b  [16 Nov 2010]
+
+  *) Fix extension code to avoid race conditions which can result in a buffer
+     overrun vulnerability: resumed sessions must not be modified as they can
+     be shared by multiple threads. CVE-2010-3864
+     [Steve Henson]
+
+  *) Fix WIN32 build system to correctly link an ENGINE directory into
+     a DLL. 
+     [Steve Henson]
+
+ Changes between 1.0.0 and 1.0.0a  [01 Jun 2010]
+
+  *) Check return value of int_rsa_verify in pkey_rsa_verifyrecover 
+     (CVE-2010-1633)
+     [Steve Henson, Peter-Michael Hager <hager@dortmund.net>]
+
+ Changes between 0.9.8n and 1.0.0  [29 Mar 2010]
+
+  *) Add "missing" function EVP_CIPHER_CTX_copy(). This copies a cipher
+     context. The operation can be customised via the ctrl mechanism in
+     case ENGINEs want to include additional functionality.
+     [Steve Henson]
+
+  *) Tolerate yet another broken PKCS#8 key format: private key value negative.
+     [Steve Henson]
+
+  *) Add new -subject_hash_old and -issuer_hash_old options to x509 utility to
+     output hashes compatible with older versions of OpenSSL.
+     [Willy Weisz <weisz@vcpc.univie.ac.at>]
+
+  *) Fix compression algorithm handling: if resuming a session use the
+     compression algorithm of the resumed session instead of determining
+     it from client hello again. Don't allow server to change algorithm.
+     [Steve Henson]
+
+  *) Add load_crls() function to apps tidying load_certs() too. Add option
+     to verify utility to allow additional CRLs to be included.
+     [Steve Henson]
+
+  *) Update OCSP request code to permit adding custom headers to the request:
+     some responders need this.
+     [Steve Henson]
+
+  *) The function EVP_PKEY_sign() returns <=0 on error: check return code
+     correctly.
+     [Julia Lawall <julia@diku.dk>]
+
+  *) Update verify callback code in apps/s_cb.c and apps/verify.c, it
+     needlessly dereferenced structures, used obsolete functions and
+     didn't handle all updated verify codes correctly.
+     [Steve Henson]
+
+  *) Disable MD2 in the default configuration.
+     [Steve Henson]
+
+  *) In BIO_pop() and BIO_push() use the ctrl argument (which was NULL) to
+     indicate the initial BIO being pushed or popped. This makes it possible
+     to determine whether the BIO is the one explicitly called or as a result
+     of the ctrl being passed down the chain. Fix BIO_pop() and SSL BIOs so
+     it handles reference counts correctly and doesn't zero out the I/O bio
+     when it is not being explicitly popped. WARNING: applications which
+     included workarounds for the old buggy behaviour will need to be modified
+     or they could free up already freed BIOs.
+     [Steve Henson]
+
+  *) Extend the uni2asc/asc2uni => OPENSSL_uni2asc/OPENSSL_asc2uni
+     renaming to all platforms (within the 0.9.8 branch, this was
+     done conditionally on Netware platforms to avoid a name clash).
+     [Guenter <lists@gknw.net>]
+
+  *) Add ECDHE and PSK support to DTLS.
+     [Michael Tuexen <tuexen@fh-muenster.de>]
+
+  *) Add CHECKED_STACK_OF macro to safestack.h, otherwise safestack can't
+     be used on C++.
+     [Steve Henson]
+
+  *) Add "missing" function EVP_MD_flags() (without this the only way to
+     retrieve a digest flags is by accessing the structure directly. Update
+     EVP_MD_do_all*() and EVP_CIPHER_do_all*() to include the name a digest
+     or cipher is registered as in the "from" argument. Print out all
+     registered digests in the dgst usage message instead of manually 
+     attempting to work them out.
+     [Steve Henson]
+
+  *) If no SSLv2 ciphers are used don't use an SSLv2 compatible client hello:
+     this allows the use of compression and extensions. Change default cipher
+     string to remove SSLv2 ciphersuites. This effectively avoids ancient SSLv2
+     by default unless an application cipher string requests it.
+     [Steve Henson]
+
+  *) Alter match criteria in PKCS12_parse(). It used to try to use local
+     key ids to find matching certificates and keys but some PKCS#12 files
+     don't follow the (somewhat unwritten) rules and this strategy fails.
+     Now just gather all certificates together and the first private key
+     then look for the first certificate that matches the key.
+     [Steve Henson]
+
+  *) Support use of registered digest and cipher names for dgst and cipher
+     commands instead of having to add each one as a special case. So now
+     you can do:
+
+        openssl sha256 foo
+
+     as well as:
+
+        openssl dgst -sha256 foo
+
+     and this works for ENGINE based algorithms too.
+
+     [Steve Henson]
+
+  *) Update Gost ENGINE to support parameter files.
+     [Victor B. Wagner <vitus@cryptocom.ru>]
+
+  *) Support GeneralizedTime in ca utility. 
+     [Oliver Martin <oliver@volatilevoid.net>, Steve Henson]
+
+  *) Enhance the hash format used for certificate directory links. The new
+     form uses the canonical encoding (meaning equivalent names will work
+     even if they aren't identical) and uses SHA1 instead of MD5. This form
+     is incompatible with the older format and as a result c_rehash should
+     be used to rebuild symbolic links.
+     [Steve Henson]
+
+  *) Make PKCS#8 the default write format for private keys, replacing the
+     traditional format. This form is standardised, more secure and doesn't
+     include an implicit MD5 dependency.
+     [Steve Henson]
+
+  *) Add a $gcc_devteam_warn option to Configure. The idea is that any code
+     committed to OpenSSL should pass this lot as a minimum.
+     [Steve Henson]
+
+  *) Add session ticket override functionality for use by EAP-FAST.
+     [Jouni Malinen <j@w1.fi>]
+
+  *) Modify HMAC functions to return a value. Since these can be implemented
+     in an ENGINE errors can occur.
+     [Steve Henson]
+
+  *) Type-checked OBJ_bsearch_ex.
+     [Ben Laurie]
+
+  *) Type-checked OBJ_bsearch. Also some constification necessitated
+     by type-checking.  Still to come: TXT_DB, bsearch(?),
+     OBJ_bsearch_ex, qsort, CRYPTO_EX_DATA, ASN1_VALUE, ASN1_STRING,
+     CONF_VALUE.
+     [Ben Laurie]
+
+  *) New function OPENSSL_gmtime_adj() to add a specific number of days and
+     seconds to a tm structure directly, instead of going through OS
+     specific date routines. This avoids any issues with OS routines such
+     as the year 2038 bug. New *_adj() functions for ASN1 time structures
+     and X509_time_adj_ex() to cover the extended range. The existing
+     X509_time_adj() is still usable and will no longer have any date issues.
+     [Steve Henson]
+
+  *) Delta CRL support. New use deltas option which will attempt to locate
+     and search any appropriate delta CRLs available.
+
+     This work was sponsored by Google.
+     [Steve Henson]
+
+  *) Support for CRLs partitioned by reason code. Reorganise CRL processing
+     code and add additional score elements. Validate alternate CRL paths
+     as part of the CRL checking and indicate a new error "CRL path validation
+     error" in this case. Applications wanting additional details can use
+     the verify callback and check the new "parent" field. If this is not
+     NULL CRL path validation is taking place. Existing applications wont
+     see this because it requires extended CRL support which is off by
+     default.
+
+     This work was sponsored by Google.
+     [Steve Henson]
+
+  *) Support for freshest CRL extension.
+
+     This work was sponsored by Google.
+     [Steve Henson]
+
+  *) Initial indirect CRL support. Currently only supported in the CRLs
+     passed directly and not via lookup. Process certificate issuer
+     CRL entry extension and lookup CRL entries by bother issuer name
+     and serial number. Check and process CRL issuer entry in IDP extension.
+
+     This work was sponsored by Google.
+     [Steve Henson]
+
+  *) Add support for distinct certificate and CRL paths. The CRL issuer
+     certificate is validated separately in this case. Only enabled if
+     an extended CRL support flag is set: this flag will enable additional
+     CRL functionality in future.
+
+     This work was sponsored by Google.
+     [Steve Henson]
+
+  *) Add support for policy mappings extension.
+
+     This work was sponsored by Google.
+     [Steve Henson]
+
+  *) Fixes to pathlength constraint, self issued certificate handling,
+     policy processing to align with RFC3280 and PKITS tests.
+
+     This work was sponsored by Google.
+     [Steve Henson]
+
+  *) Support for name constraints certificate extension. DN, email, DNS
+     and URI types are currently supported.
+
+     This work was sponsored by Google.
+     [Steve Henson]
+
+  *) To cater for systems that provide a pointer-based thread ID rather
+     than numeric, deprecate the current numeric thread ID mechanism and
+     replace it with a structure and associated callback type. This
+     mechanism allows a numeric "hash" to be extracted from a thread ID in
+     either case, and on platforms where pointers are larger than 'long',
+     mixing is done to help ensure the numeric 'hash' is usable even if it
+     can't be guaranteed unique. The default mechanism is to use "&errno"
+     as a pointer-based thread ID to distinguish between threads.
+
+     Applications that want to provide their own thread IDs should now use
+     CRYPTO_THREADID_set_callback() to register a callback that will call
+     either CRYPTO_THREADID_set_numeric() or CRYPTO_THREADID_set_pointer().
+
+     Note that ERR_remove_state() is now deprecated, because it is tied
+     to the assumption that thread IDs are numeric.  ERR_remove_state(0)
+     to free the current thread's error state should be replaced by
+     ERR_remove_thread_state(NULL).
+
+     (This new approach replaces the functions CRYPTO_set_idptr_callback(),
+     CRYPTO_get_idptr_callback(), and CRYPTO_thread_idptr() that existed in
+     OpenSSL 0.9.9-dev between June 2006 and August 2008. Also, if an
+     application was previously providing a numeric thread callback that
+     was inappropriate for distinguishing threads, then uniqueness might
+     have been obtained with &errno that happened immediately in the
+     intermediate development versions of OpenSSL; this is no longer the
+     case, the numeric thread callback will now override the automatic use
+     of &errno.)
+     [Geoff Thorpe, with help from Bodo Moeller]
+
+  *) Initial support for different CRL issuing certificates. This covers a
+     simple case where the self issued certificates in the chain exist and
+     the real CRL issuer is higher in the existing chain.
+
+     This work was sponsored by Google.
+     [Steve Henson]
+
+  *) Removed effectively defunct crypto/store from the build.
+     [Ben Laurie]
+
+  *) Revamp of STACK to provide stronger type-checking. Still to come:
+     TXT_DB, bsearch(?), OBJ_bsearch, qsort, CRYPTO_EX_DATA, ASN1_VALUE,
+     ASN1_STRING, CONF_VALUE.
+     [Ben Laurie]
+
+  *) Add a new SSL_MODE_RELEASE_BUFFERS mode flag to release unused buffer
+     RAM on SSL connections.  This option can save about 34k per idle SSL.
+     [Nick Mathewson]
+
+  *) Revamp of LHASH to provide stronger type-checking. Still to come:
+     STACK, TXT_DB, bsearch, qsort.
+     [Ben Laurie]
+
+  *) Initial support for Cryptographic Message Syntax (aka CMS) based
+     on RFC3850, RFC3851 and RFC3852. New cms directory and cms utility,
+     support for data, signedData, compressedData, digestedData and
+     encryptedData, envelopedData types included. Scripts to check against
+     RFC4134 examples draft and interop and consistency checks of many
+     content types and variants.
+     [Steve Henson]
+
+  *) Add options to enc utility to support use of zlib compression BIO.
+     [Steve Henson]
+
+  *) Extend mk1mf to support importing of options and assembly language
+     files from Configure script, currently only included in VC-WIN32.
+     The assembly language rules can now optionally generate the source
+     files from the associated perl scripts.
+     [Steve Henson]
+
+  *) Implement remaining functionality needed to support GOST ciphersuites.
+     Interop testing has been performed using CryptoPro implementations.
+     [Victor B. Wagner <vitus@cryptocom.ru>]
+
+  *) s390x assembler pack.
+     [Andy Polyakov]
+
+  *) ARMv4 assembler pack. ARMv4 refers to v4 and later ISA, not CPU
+     "family."
+     [Andy Polyakov]
+
+  *) Implement Opaque PRF Input TLS extension as specified in
+     draft-rescorla-tls-opaque-prf-input-00.txt.  Since this is not an
+     official specification yet and no extension type assignment by
+     IANA exists, this extension (for now) will have to be explicitly
+     enabled when building OpenSSL by providing the extension number
+     to use.  For example, specify an option
+
+         -DTLSEXT_TYPE_opaque_prf_input=0x9527
+
+     to the "config" or "Configure" script to enable the extension,
+     assuming extension number 0x9527 (which is a completely arbitrary
+     and unofficial assignment based on the MD5 hash of the Internet
+     Draft).  Note that by doing so, you potentially lose
+     interoperability with other TLS implementations since these might
+     be using the same extension number for other purposes.
+
+     SSL_set_tlsext_opaque_prf_input(ssl, src, len) is used to set the
+     opaque PRF input value to use in the handshake.  This will create
+     an interal copy of the length-'len' string at 'src', and will
+     return non-zero for success.
+
+     To get more control and flexibility, provide a callback function
+     by using
+
+          SSL_CTX_set_tlsext_opaque_prf_input_callback(ctx, cb)
+          SSL_CTX_set_tlsext_opaque_prf_input_callback_arg(ctx, arg)
+
+     where
+
+          int (*cb)(SSL *, void *peerinput, size_t len, void *arg);
+          void *arg;
+
+     Callback function 'cb' will be called in handshakes, and is
+     expected to use SSL_set_tlsext_opaque_prf_input() as appropriate.
+     Argument 'arg' is for application purposes (the value as given to
+     SSL_CTX_set_tlsext_opaque_prf_input_callback_arg() will directly
+     be provided to the callback function).  The callback function
+     has to return non-zero to report success: usually 1 to use opaque
+     PRF input just if possible, or 2 to enforce use of the opaque PRF
+     input.  In the latter case, the library will abort the handshake
+     if opaque PRF input is not successfully negotiated.
+
+     Arguments 'peerinput' and 'len' given to the callback function
+     will always be NULL and 0 in the case of a client.  A server will
+     see the client's opaque PRF input through these variables if
+     available (NULL and 0 otherwise).  Note that if the server
+     provides an opaque PRF input, the length must be the same as the
+     length of the client's opaque PRF input.
+
+     Note that the callback function will only be called when creating
+     a new session (session resumption can resume whatever was
+     previously negotiated), and will not be called in SSL 2.0
+     handshakes; thus, SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) or
+     SSL_set_options(ssl, SSL_OP_NO_SSLv2) is especially recommended
+     for applications that need to enforce opaque PRF input.
+
+     [Bodo Moeller]
+
+  *) Update ssl code to support digests other than SHA1+MD5 for handshake
+     MAC. 
+
+     [Victor B. Wagner <vitus@cryptocom.ru>]
+
+  *) Add RFC4507 support to OpenSSL. This includes the corrections in
+     RFC4507bis. The encrypted ticket format is an encrypted encoded
+     SSL_SESSION structure, that way new session features are automatically
+     supported.
+
+     If a client application caches session in an SSL_SESSION structure
+     support is transparent because tickets are now stored in the encoded
+     SSL_SESSION.
+     
+     The SSL_CTX structure automatically generates keys for ticket
+     protection in servers so again support should be possible
+     with no application modification.
+
+     If a client or server wishes to disable RFC4507 support then the option
+     SSL_OP_NO_TICKET can be set.
+
+     Add a TLS extension debugging callback to allow the contents of any client
+     or server extensions to be examined.
+
+     This work was sponsored by Google.
+     [Steve Henson]
+
+  *) Final changes to avoid use of pointer pointer casts in OpenSSL.
+     OpenSSL should now compile cleanly on gcc 4.2
+     [Peter Hartley <pdh@utter.chaos.org.uk>, Steve Henson]
+
+  *) Update SSL library to use new EVP_PKEY MAC API. Include generic MAC
+     support including streaming MAC support: this is required for GOST
+     ciphersuite support.
+     [Victor B. Wagner <vitus@cryptocom.ru>, Steve Henson]
+
+  *) Add option -stream to use PKCS#7 streaming in smime utility. New
+     function i2d_PKCS7_bio_stream() and PEM_write_PKCS7_bio_stream()
+     to output in BER and PEM format.
+     [Steve Henson]
+
+  *) Experimental support for use of HMAC via EVP_PKEY interface. This
+     allows HMAC to be handled via the EVP_DigestSign*() interface. The
+     EVP_PKEY "key" in this case is the HMAC key, potentially allowing
+     ENGINE support for HMAC keys which are unextractable. New -mac and
+     -macopt options to dgst utility.
+     [Steve Henson]
+
+  *) New option -sigopt to dgst utility. Update dgst to use
+     EVP_Digest{Sign,Verify}*. These two changes make it possible to use
+     alternative signing paramaters such as X9.31 or PSS in the dgst 
+     utility.
+     [Steve Henson]
+
+  *) Change ssl_cipher_apply_rule(), the internal function that does
+     the work each time a ciphersuite string requests enabling
+     ("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
+     removing ("!foo+bar") a class of ciphersuites: Now it maintains
+     the order of disabled ciphersuites such that those ciphersuites
+     that most recently went from enabled to disabled not only stay
+     in order with respect to each other, but also have higher priority
+     than other disabled ciphersuites the next time ciphersuites are
+     enabled again.
+
+     This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
+     the same ciphersuites as with "HIGH" alone, but in a specific
+     order where the PSK ciphersuites come first (since they are the
+     most recently disabled ciphersuites when "HIGH" is parsed).
+
+     Also, change ssl_create_cipher_list() (using this new
+     funcionality) such that between otherwise identical
+     cihpersuites, ephemeral ECDH is preferred over ephemeral DH in
+     the default order.
+     [Bodo Moeller]
+
+  *) Change ssl_create_cipher_list() so that it automatically
+     arranges the ciphersuites in reasonable order before starting
+     to process the rule string.  Thus, the definition for "DEFAULT"
+     (SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
+     remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
+     This makes it much easier to arrive at a reasonable default order
+     in applications for which anonymous ciphers are OK (meaning
+     that you can't actually use DEFAULT).
+     [Bodo Moeller; suggested by Victor Duchovni]
+
+  *) Split the SSL/TLS algorithm mask (as used for ciphersuite string
+     processing) into multiple integers instead of setting
+     "SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
+     "SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
+     (These masks as well as the individual bit definitions are hidden
+     away into the non-exported interface ssl/ssl_locl.h, so this
+     change to the definition of the SSL_CIPHER structure shouldn't
+     affect applications.)  This give us more bits for each of these
+     categories, so there is no longer a need to coagulate AES128 and
+     AES256 into a single algorithm bit, and to coagulate Camellia128
+     and Camellia256 into a single algorithm bit, which has led to all
+     kinds of kludges.
+
+     Thus, among other things, the kludge introduced in 0.9.7m and
+     0.9.8e for masking out AES256 independently of AES128 or masking
+     out Camellia256 independently of AES256 is not needed here in 0.9.9.
+
+     With the change, we also introduce new ciphersuite aliases that
+     so far were missing: "AES128", "AES256", "CAMELLIA128", and
+     "CAMELLIA256".
+     [Bodo Moeller]
+
+  *) Add support for dsa-with-SHA224 and dsa-with-SHA256.
+     Use the leftmost N bytes of the signature input if the input is
+     larger than the prime q (with N being the size in bytes of q).
+     [Nils Larsch]
+
+  *) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
+     it yet and it is largely untested.
+     [Steve Henson]
+
+  *) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
+     [Nils Larsch]
+
+  *) Initial incomplete changes to avoid need for function casts in OpenSSL
+     some compilers (gcc 4.2 and later) reject their use. Safestack is
+     reimplemented.  Update ASN1 to avoid use of legacy functions. 
+     [Steve Henson]
+
+  *) Win32/64 targets are linked with Winsock2.
+     [Andy Polyakov]
+
+  *) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
+     to external functions. This can be used to increase CRL handling 
+     efficiency especially when CRLs are very large by (for example) storing
+     the CRL revoked certificates in a database.
+     [Steve Henson]
+
+  *) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
+     new CRLs added to a directory can be used. New command line option
+     -verify_return_error to s_client and s_server. This causes real errors
+     to be returned by the verify callback instead of carrying on no matter
+     what. This reflects the way a "real world" verify callback would behave.
+     [Steve Henson]
+
+  *) GOST engine, supporting several GOST algorithms and public key formats.
+     Kindly donated by Cryptocom.
+     [Cryptocom]
+
+  *) Partial support for Issuing Distribution Point CRL extension. CRLs
+     partitioned by DP are handled but no indirect CRL or reason partitioning
+     (yet). Complete overhaul of CRL handling: now the most suitable CRL is
+     selected via a scoring technique which handles IDP and AKID in CRLs.
+     [Steve Henson]
+
+  *) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
+     will ultimately be used for all verify operations: this will remove the
+     X509_STORE dependency on certificate verification and allow alternative
+     lookup methods.  X509_STORE based implementations of these two callbacks.
+     [Steve Henson]
+
+  *) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
+     Modify get_crl() to find a valid (unexpired) CRL if possible.
+     [Steve Henson]
+
+  *) New function X509_CRL_match() to check if two CRLs are identical. Normally
+     this would be called X509_CRL_cmp() but that name is already used by
+     a function that just compares CRL issuer names. Cache several CRL 
+     extensions in X509_CRL structure and cache CRLDP in X509.
+     [Steve Henson]
+
+  *) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
+     this maps equivalent X509_NAME structures into a consistent structure.
+     Name comparison can then be performed rapidly using memcmp().
+     [Steve Henson]
+
+  *) Non-blocking OCSP request processing. Add -timeout option to ocsp 
+     utility.
+     [Steve Henson]
+
+  *) Allow digests to supply their own micalg string for S/MIME type using
+     the ctrl EVP_MD_CTRL_MICALG.
+     [Steve Henson]
+
+  *) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
+     EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
+     ctrl. It can then customise the structure before and/or after signing
+     if necessary.
+     [Steve Henson]
+
+  *) New function OBJ_add_sigid() to allow application defined signature OIDs
+     to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
+     to free up any added signature OIDs.
+     [Steve Henson]
+
+  *) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
+     EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
+     digest and cipher tables. New options added to openssl utility:
+     list-message-digest-algorithms and list-cipher-algorithms.
+     [Steve Henson]
+
+  *) Change the array representation of binary polynomials: the list
+     of degrees of non-zero coefficients is now terminated with -1.
+     Previously it was terminated with 0, which was also part of the
+     value; thus, the array representation was not applicable to
+     polynomials where t^0 has coefficient zero.  This change makes
+     the array representation useful in a more general context.
+     [Douglas Stebila]
+
+  *) Various modifications and fixes to SSL/TLS cipher string
+     handling.  For ECC, the code now distinguishes between fixed ECDH
+     with RSA certificates on the one hand and with ECDSA certificates
+     on the other hand, since these are separate ciphersuites.  The
+     unused code for Fortezza ciphersuites has been removed.
+
+     For consistency with EDH, ephemeral ECDH is now called "EECDH"
+     (not "ECDHE").  For consistency with the code for DH
+     certificates, use of ECDH certificates is now considered ECDH
+     authentication, not RSA or ECDSA authentication (the latter is
+     merely the CA's signing algorithm and not actively used in the
+     protocol).
+
+     The temporary ciphersuite alias "ECCdraft" is no longer
+     available, and ECC ciphersuites are no longer excluded from "ALL"
+     and "DEFAULT".  The following aliases now exist for RFC 4492
+     ciphersuites, most of these by analogy with the DH case:
+
+         kECDHr   - ECDH cert, signed with RSA
+         kECDHe   - ECDH cert, signed with ECDSA
+         kECDH    - ECDH cert (signed with either RSA or ECDSA)
+         kEECDH   - ephemeral ECDH
+         ECDH     - ECDH cert or ephemeral ECDH
+
+         aECDH    - ECDH cert
+         aECDSA   - ECDSA cert
+         ECDSA    - ECDSA cert
+
+         AECDH    - anonymous ECDH
+         EECDH    - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
+
+     [Bodo Moeller]
+
+  *) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
+     Use correct micalg parameters depending on digest(s) in signed message.
+     [Steve Henson]
+
+  *) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
+     an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
+     [Steve Henson]
+
+  *) Initial engine support for EVP_PKEY_METHOD. New functions to permit
+     an engine to register a method. Add ENGINE lookups for methods and
+     functional reference processing.
+     [Steve Henson]
+
+  *) New functions EVP_Digest{Sign,Verify)*. These are enchance versions of
+     EVP_{Sign,Verify}* which allow an application to customise the signature
+     process.
+     [Steve Henson]
+
+  *) New -resign option to smime utility. This adds one or more signers
+     to an existing PKCS#7 signedData structure. Also -md option to use an
+     alternative message digest algorithm for signing.
+     [Steve Henson]
+
+  *) Tidy up PKCS#7 routines and add new functions to make it easier to
+     create PKCS7 structures containing multiple signers. Update smime
+     application to support multiple signers.
+     [Steve Henson]
+
+  *) New -macalg option to pkcs12 utility to allow setting of an alternative
+     digest MAC.
+     [Steve Henson]
+
+  *) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
+     Reorganize PBE internals to lookup from a static table using NIDs,
+     add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
+     EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
+     PRF which will be automatically used with PBES2.
+     [Steve Henson]
+
+  *) Replace the algorithm specific calls to generate keys in "req" with the
+     new API.
+     [Steve Henson]
+
+  *) Update PKCS#7 enveloped data routines to use new API. This is now
+     supported by any public key method supporting the encrypt operation. A
+     ctrl is added to allow the public key algorithm to examine or modify
+     the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
+     a no op.
+     [Steve Henson]
+
+  *) Add a ctrl to asn1 method to allow a public key algorithm to express
+     a default digest type to use. In most cases this will be SHA1 but some
+     algorithms (such as GOST) need to specify an alternative digest. The
+     return value indicates how strong the prefernce is 1 means optional and
+     2 is mandatory (that is it is the only supported type). Modify
+     ASN1_item_sign() to accept a NULL digest argument to indicate it should
+     use the default md. Update openssl utilities to use the default digest
+     type for signing if it is not explicitly indicated.
+     [Steve Henson]
+
+  *) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New 
+     EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
+     signing method from the key type. This effectively removes the link
+     between digests and public key types.
+     [Steve Henson]
+
+  *) Add an OID cross reference table and utility functions. Its purpose is to
+     translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
+     rsaEncryption. This will allow some of the algorithm specific hackery
+     needed to use the correct OID to be removed. 
+     [Steve Henson]
+
+  *) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
+     structures for PKCS7_sign(). They are now set up by the relevant public
+     key ASN1 method.
+     [Steve Henson]
+
+  *) Add provisional EC pkey method with support for ECDSA and ECDH.
+     [Steve Henson]
+
+  *) Add support for key derivation (agreement) in the API, DH method and
+     pkeyutl.
+     [Steve Henson]
+
+  *) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
+     public and private key formats. As a side effect these add additional 
+     command line functionality not previously available: DSA signatures can be
+     generated and verified using pkeyutl and DH key support and generation in
+     pkey, genpkey.
+     [Steve Henson]
+
+  *) BeOS support.
+     [Oliver Tappe <zooey@hirschkaefer.de>]
+
+  *) New make target "install_html_docs" installs HTML renditions of the
+     manual pages.
+     [Oliver Tappe <zooey@hirschkaefer.de>]
+
+  *) New utility "genpkey" this is analagous to "genrsa" etc except it can
+     generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
+     support key and parameter generation and add initial key generation
+     functionality for RSA.
+     [Steve Henson]
+
+  *) Add functions for main EVP_PKEY_method operations. The undocumented
+     functions EVP_PKEY_{encrypt,decrypt} have been renamed to
+     EVP_PKEY_{encrypt,decrypt}_old. 
+     [Steve Henson]
+
+  *) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
+     key API, doesn't do much yet.
+     [Steve Henson]
+
+  *) New function EVP_PKEY_asn1_get0_info() to retrieve information about
+     public key algorithms. New option to openssl utility:
+     "list-public-key-algorithms" to print out info.
+     [Steve Henson]
+
+  *) Implement the Supported Elliptic Curves Extension for
+     ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
+     [Douglas Stebila]
+
+  *) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
+     EVP_CIPHER structures to avoid later problems in EVP_cleanup().
+     [Steve Henson]
+
+  *) New utilities pkey and pkeyparam. These are similar to algorithm specific
+     utilities such as rsa, dsa, dsaparam etc except they process any key
+     type.
+     [Steve Henson]
+
+  *) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New 
+     functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
+     EVP_PKEY_print_param() to print public key data from an EVP_PKEY
+     structure.
+     [Steve Henson]
+
+  *) Initial support for pluggable public key ASN1.
+     De-spaghettify the public key ASN1 handling. Move public and private
+     key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
+     algorithm specific handling to a single module within the relevant
+     algorithm directory. Add functions to allow (near) opaque processing
+     of public and private key structures.
+     [Steve Henson]
+
+  *) Implement the Supported Point Formats Extension for
+     ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
+     [Douglas Stebila]
+
+  *) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
+     for the psk identity [hint] and the psk callback functions to the
+     SSL_SESSION, SSL and SSL_CTX structure.
+     
+     New ciphersuites:
+         PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
+         PSK-AES256-CBC-SHA
+ 
+     New functions:
+         SSL_CTX_use_psk_identity_hint
+         SSL_get_psk_identity_hint
+         SSL_get_psk_identity
+         SSL_use_psk_identity_hint
+
+     [Mika Kousa and Pasi Eronen of Nokia Corporation]
+
+  *) Add RFC 3161 compliant time stamp request creation, response generation
+     and response verification functionality.
+     [Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
+
+  *) Add initial support for TLS extensions, specifically for the server_name
+     extension so far.  The SSL_SESSION, SSL_CTX, and SSL data structures now
+     have new members for a host name.  The SSL data structure has an
+     additional member SSL_CTX *initial_ctx so that new sessions can be
+     stored in that context to allow for session resumption, even after the
+     SSL has been switched to a new SSL_CTX in reaction to a client's
+     server_name extension.
+
+     New functions (subject to change):
+
+         SSL_get_servername()
+         SSL_get_servername_type()
+         SSL_set_SSL_CTX()
+
+     New CTRL codes and macros (subject to change):
+
+         SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
+                                 - SSL_CTX_set_tlsext_servername_callback()
+         SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
+                                      - SSL_CTX_set_tlsext_servername_arg()
+         SSL_CTRL_SET_TLSEXT_HOSTNAME           - SSL_set_tlsext_host_name()
+
+     openssl s_client has a new '-servername ...' option.
+
+     openssl s_server has new options '-servername_host ...', '-cert2 ...',
+     '-key2 ...', '-servername_fatal' (subject to change).  This allows
+     testing the HostName extension for a specific single host name ('-cert'
+     and '-key' remain fallbacks for handshakes without HostName
+     negotiation).  If the unrecogninzed_name alert has to be sent, this by
+     default is a warning; it becomes fatal with the '-servername_fatal'
+     option.
+
+     [Peter Sylvester,  Remy Allais, Christophe Renou]
+
+  *) Whirlpool hash implementation is added.
+     [Andy Polyakov]
+
+  *) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
+     bn(64,32). Because of instruction set limitations it doesn't have
+     any negative impact on performance. This was done mostly in order
+     to make it possible to share assembler modules, such as bn_mul_mont
+     implementations, between 32- and 64-bit builds without hassle.
+     [Andy Polyakov]
+
+  *) Move code previously exiled into file crypto/ec/ec2_smpt.c
+     to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
+     macro.
+     [Bodo Moeller]
+
+  *) New candidate for BIGNUM assembler implementation, bn_mul_mont,
+     dedicated Montgomery multiplication procedure, is introduced.
+     BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
+     "64-bit" performance on certain 32-bit targets.
+     [Andy Polyakov]
+
+  *) New option SSL_OP_NO_COMP to disable use of compression selectively
+     in SSL structures. New SSL ctrl to set maximum send fragment size. 
+     Save memory by seeting the I/O buffer sizes dynamically instead of
+     using the maximum available value.
+     [Steve Henson]
+
+  *) New option -V for 'openssl ciphers'. This prints the ciphersuite code
+     in addition to the text details.
+     [Bodo Moeller]
+
+  *) Very, very preliminary EXPERIMENTAL support for printing of general
+     ASN1 structures. This currently produces rather ugly output and doesn't
+     handle several customised structures at all.
+     [Steve Henson]
+
+  *) Integrated support for PVK file format and some related formats such
+     as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
+     these in the 'rsa' and 'dsa' utilities.
+     [Steve Henson]
+
+  *) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
+     [Steve Henson]
+
+  *) Remove the ancient ASN1_METHOD code. This was only ever used in one
+     place for the (very old) "NETSCAPE" format certificates which are now
+     handled using new ASN1 code equivalents.
+     [Steve Henson]
+
+  *) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
+     pointer and make the SSL_METHOD parameter in SSL_CTX_new,
+     SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
+     [Nils Larsch]
+
+  *) Modify CRL distribution points extension code to print out previously
+     unsupported fields. Enhance extension setting code to allow setting of
+     all fields.
+     [Steve Henson]
+
+  *) Add print and set support for Issuing Distribution Point CRL extension.
+     [Steve Henson]
+
+  *) Change 'Configure' script to enable Camellia by default.
+     [NTT]
+
+ Changes between 0.9.8s and 0.9.8t [18 Jan 2012]
+
+  *) Fix for DTLS DoS issue introduced by fix for CVE-2011-4109.
+     Thanks to Antonio Martin, Enterprise Secure Access Research and
+     Development, Cisco Systems, Inc. for discovering this bug and
+     preparing a fix. (CVE-2012-0050)
+     [Antonio Martin]
+  
  Changes between 0.9.8r and 0.9.8s [4 Jan 2012]
 
   *) Nadhem Alfardan and Kenny Paterson have discovered an extension
diff --git a/CHANGES.SSLeay b/CHANGES.SSLeay
index dbb80b003d81..ca5cd7297678 100644
--- a/CHANGES.SSLeay
+++ b/CHANGES.SSLeay
@@ -148,7 +148,7 @@ eric (about to go bushwalking for the 4 day easter break :-)
       This would tend to cause memory overwrites since SSLv3 has
       a maximum packet size of 16k.  If your program uses
       buffers <= 16k, you would probably never see this problem.
-    - Fixed a new errors that were cause by malloc() not returning
+    - Fixed a few errors that were cause by malloc() not returning
       0 initialised memory..
     - SSL_OP_NETSCAPE_CA_DN_BUG was being switched on when using
       SSL_CTX_set_options(ssl_ctx,SSL_OP_ALL); which was a bad thing
diff --git a/Configure b/Configure
index ec87f24f3431..cbbf4de8b25f 100755
--- a/Configure
+++ b/Configure
@@ -6,13 +6,11 @@ eval 'exec perl -S $0 ${1+"$@"}'
 ##
 
 require 5.000;
-eval 'use strict;';
-
-print STDERR "Warning: perl module strict not found.\n" if ($@);
+use strict;
 
 # see INSTALL for instructions.
 
-my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimental-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [enable-montasm] [no-asm] [no-dso] [no-krb5] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
+my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimental-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [no-hw-xxx|no-hw] [[no-]threads] [[no-]shared] [[no-]zlib|zlib-dynamic] [no-asm] [no-dso] [no-krb5] [sctp] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] [--with-xxx[=vvv]] [--test-sanity] os/compiler[:flags]\n";
 
 # Options:
 #
@@ -40,6 +38,8 @@ my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimenta
 # --test-sanity Make a number of sanity checks on the data in this file.
 #               This is a debugging tool for OpenSSL developers.
 #
+# --cross-compile-prefix Add specified prefix to binutils components.
+#
 # no-hw-xxx     do not compile support for specific crypto hardware.
 #               Generic OpenSSL-style methods relating to this support
 #               are always compiled but return NULL if the hardware
@@ -56,8 +56,7 @@ my $usage="Usage: Configure [no-<cipher> ...] [enable-<cipher> ...] [experimenta
 # [no-]zlib     [don't] compile support for zlib compression.
 # zlib-dynamic	Like "zlib", but the zlib library is expected to be a shared
 #		library and will be loaded in run-time by the OpenSSL library.
-# enable-montasm 0.9.8 branch only: enable Montgomery x86 assembler backport
-#               from 0.9.9
+# sctp          include SCTP support
 # 386           generate 80386 code
 # no-sse2	disables IA-32 SSE2 code, above option implies no-sse2
 # no-<cipher>   build without specified algorithm (rsa, idea, rc5, ...)
@@ -125,14 +124,24 @@ my $tlib="-lnsl -lsocket";
 my $bits1="THIRTY_TWO_BIT ";
 my $bits2="SIXTY_FOUR_BIT ";
 
-my $x86_elf_asm="x86cpuid-elf.o:bn86-elf.o co86-elf.o MAYBE-MO86-elf.o:dx86-elf.o yx86-elf.o:ax86-elf.o:bx86-elf.o:mx86-elf.o:sx86-elf.o s512sse2-elf.o:cx86-elf.o:rx86-elf.o rc4_skey.o:rm86-elf.o:r586-elf.o";
-my $x86_coff_asm="x86cpuid-cof.o:bn86-cof.o co86-cof.o MAYBE-MO86-cof.o:dx86-cof.o yx86-cof.o:ax86-cof.o:bx86-cof.o:mx86-cof.o:sx86-cof.o s512sse2-cof.o:cx86-cof.o:rx86-cof.o rc4_skey.o:rm86-cof.o:r586-cof.o";
-my $x86_out_asm="x86cpuid-out.o:bn86-out.o co86-out.o MAYBE-MO86-out.o:dx86-out.o yx86-out.o:ax86-out.o:bx86-out.o:mx86-out.o:sx86-out.o s512sse2-out.o:cx86-out.o:rx86-out.o rc4_skey.o:rm86-out.o:r586-out.o";
-
-my $x86_64_asm="x86_64cpuid.o:x86_64-gcc.o x86_64-mont.o::aes-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o::";
-my $ia64_asm=":bn-ia64.o::aes_core.o aes_cbc.o aes-ia64.o:::sha1-ia64.o sha256-ia64.o sha512-ia64.o::rc4-ia64.o rc4_skey.o::";
-
-my $no_asm="::::::::::";
+my $x86_asm="x86cpuid.o:bn-586.o co-586.o x86-mont.o x86-gf2m.o:des-586.o crypt586.o:aes-586.o vpaes-x86.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o:cmll-x86.o:ghash-x86.o:";
+
+my $x86_elf_asm="$x86_asm:elf";
+
+my $x86_64_asm="x86_64cpuid.o:x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o modexp512-x86_64.o::aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o rc4-md5-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:ghash-x86_64.o:";
+my $ia64_asm="ia64cpuid.o:bn-ia64.o ia64-mont.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o::rc4-ia64.o rc4_skey.o:::::ghash-ia64.o::void";
+my $sparcv9_asm="sparcv9cap.o sparccpuid.o:bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o:des_enc-sparc.o fcrypt_b.o:aes_core.o aes_cbc.o aes-sparcv9.o:::sha1-sparcv9.o sha256-sparcv9.o sha512-sparcv9.o:::::::ghash-sparcv9.o::void";
+my $sparcv8_asm=":sparcv8.o:des_enc-sparc.o fcrypt_b.o:::::::::::::void";
+my $alpha_asm="alphacpuid.o:bn_asm.o alpha-mont.o:::::sha1-alpha.o:::::::ghash-alpha.o::void";
+my $mips32_asm=":bn-mips.o::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o::::::::";
+my $mips64_asm=":bn-mips.o mips-mont.o::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o sha512-mips.o::::::::";
+my $s390x_asm="s390xcap.o s390xcpuid.o:bn-s390x.o s390x-mont.o s390x-gf2m.o::aes-s390x.o aes-ctr.o aes-xts.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o:";
+my $armv4_asm="armcap.o armv4cpuid.o:bn_asm.o armv4-mont.o armv4-gf2m.o::aes_cbc.o aes-armv4.o:::sha1-armv4-large.o sha256-armv4.o sha512-armv4.o:::::::ghash-armv4.o::void";
+my $parisc11_asm="pariscid.o:bn_asm.o parisc-mont.o::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::32";
+my $parisc20_asm="pariscid.o:pa-risc2W.o parisc-mont.o::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::64";
+my $ppc32_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o::::::::";
+my $ppc64_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o sha512-ppc.o::::::::";
+my $no_asm=":::::::::::::::void";
 
 # As for $BSDthreads. Idea is to maintain "collective" set of flags,
 # which would cover all BSD flavors. -pthread applies to them all, 
@@ -143,7 +152,7 @@ my $no_asm="::::::::::";
 # seems to be sufficient?
 my $BSDthreads="-pthread -D_THREAD_SAFE -D_REENTRANT";
 
-#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $cpuid_obj : $bn_obj : $des_obj : $aes_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags
+#config-string	$cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $cpuid_obj : $bn_obj : $des_obj : $aes_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $wp_obj : $cmll_obj : $modes_obj : $engines_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags : $multilib
 
 my %table=(
 # File 'TABLE' (created by 'make TABLE') contains the data from this list,
@@ -158,32 +167,34 @@ my %table=(
 # Our development configs
 "purify",	"purify gcc:-g -DPURIFY -Wall::(unknown)::-lsocket -lnsl::::",
 "debug",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown)::-lefence::::",
-"debug-ben",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::bn86-elf.o co86-elf.o",
+"debug-ben",	"gcc:$gcc_devteam_warn -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DDEBUG_SAFESTACK -O2 -pipe::(unknown):::::",
 "debug-ben-openbsd","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
 "debug-ben-openbsd-debug","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DOPENSSL_OPENBSD_DEV_CRYPTO -DOPENSSL_NO_ASM -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown)::::",
-"debug-ben-debug",	"gcc:$gcc_devteam_warn -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG  -DDEBUG_SAFESTACK -ggdb3 -O2 -pipe::(unknown)::::::",
-"debug-ben-debug-noopt",	"gcc:$gcc_devteam_warn -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG  -DDEBUG_SAFESTACK -ggdb3 -pipe::(unknown)::::::",
+"debug-ben-debug",	"gcc44:$gcc_devteam_warn -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -g3 -O2 -pipe::(unknown)::::::",
+"debug-ben-macos",	"cc:$gcc_devteam_warn -arch i386 -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -O3 -DL_ENDIAN -g3 -pipe::(unknown)::-Wl,-search_paths_first::::",
+"debug-ben-macos-gcc46",	"gcc-mp-4.6:$gcc_devteam_warn -Wconversion -DBN_DEBUG -DCONF_DEBUG -DDEBUG_SAFESTACK -DDEBUG_UNUSED -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -O3 -DL_ENDIAN -g3 -pipe::(unknown)::::::",
+"debug-ben-no-opt",	"gcc: -Wall -Wmissing-prototypes -Wstrict-prototypes -Wmissing-declarations -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG -Werror -DL_ENDIAN -DTERMIOS -Wall -g3::(unknown)::::::",
 "debug-ben-strict",	"gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown)::::::",
 "debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
-"debug-bodo",	"gcc:-DL_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBIO_PAIR_DEBUG -DPEDANTIC -g -march=i486 -pedantic -Wshadow -Wall -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}",
+"debug-bodo",	"gcc:$gcc_devteam_warn -DBN_DEBUG -DBN_DEBUG_RAND -DCONF_DEBUG -DBIO_PAIR_DEBUG -m64 -DL_ENDIAN -DTERMIO -g -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 "debug-ulf", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DBN_DEBUG_RAND -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations:::CYGWIN32:::${no_asm}:win32:cygwin-shared:::.dll",
-"debug-steve64", "gcc:$gcc_devteam_warn -m64 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-steve64", "gcc:$gcc_devteam_warn -m64 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-steve32", "gcc:$gcc_devteam_warn -m32 -DL_ENDIAN -DCONF_DEBUG -DDEBUG_SAFESTACK -g -pipe::-D_REENTRANT::-rdynamic -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC:-m32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-steve-opt", "gcc:$gcc_devteam_warn -m64 -O3 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-steve",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DPEDANTIC -m32 -g -pedantic -Wno-long-long -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared",
-"debug-steve-linux-pseudo64",	"gcc:-DL_ENDIAN -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DDEBUG_SAFESTACK -DCRYPTO_MDEBUG_ALL -DOPENSSL_NO_ASM -g -mcpu=i486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::-rdynamic -ldl:SIXTY_FOUR_BIT:${no_asm}:dlfcn:linux-shared",
+"debug-steve-opt", "gcc:$gcc_devteam_warn -m64 -O3 -DL_ENDIAN -DTERMIO -DCONF_DEBUG -DDEBUG_SAFESTACK -g::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-elf","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-noasm","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-elf-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-levitte-linux-noasm-extreme","gcc:-DLEVITTE_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_DEBUG -DBN_DEBUG_RAND -DCRYPTO_MDEBUG -DENGINE_CONF_DEBUG -DOPENSSL_NO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -DPEDANTIC -ggdb -g3 -mcpu=i486 -pedantic -ansi -Wall -W -Wundef -Wshadow -Wcast-align -Wstrict-prototypes -Wmissing-prototypes -Wno-long-long -Wundef -Wconversion -pipe::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-geoff","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-linux-pentium","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
-"debug-linux-ppro","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
-"debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -march=i486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -march=i486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-linux-generic32","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO  -g -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-geoff32","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:BN_LLONG:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-geoff64","gcc:-DBN_DEBUG -DBN_DEBUG_RAND -DBN_STRICT -DPURIFY -DOPENSSL_NO_DEPRECATED -DOPENSSL_NO_ASM -DOPENSSL_NO_INLINE_ASM -DL_ENDIAN -DTERMIO -DPEDANTIC -O1 -ggdb2 -Wall -Werror -Wundef -pedantic -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wsign-compare -Wmissing-prototypes -Wmissing-declarations -Wno-long-long::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-pentium","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentium -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
+"debug-linux-ppro","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
+"debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -march=i486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -march=i486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-ia32-aes", "gcc:-DAES_EXPERIMENTAL -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:x86cpuid.o:bn-586.o co-586.o x86-mont.o:des-586.o crypt586.o:aes_x86core.o aes_cbc.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o::ghash-x86.o::elf:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-generic32","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO -g -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-linux-generic64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO -g -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-linux-x86_64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -m64 -DL_ENDIAN -DTERMIO -g -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-linux-x86_64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -m64 -DL_ENDIAN -DTERMIO -g -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 "dist",		"cc:-O::(unknown)::::::",
 
 # Basic configs that should work on any (32 and less bit) box
@@ -191,8 +202,8 @@ my %table=(
 "cc",		"cc:-O::(unknown)::::::",
 
 ####VOS Configurations
-"vos-gcc","gcc:-O3 -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -DB_ENDIAN::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
-"debug-vos-gcc","gcc:-O0 -g -Wall -D_POSIX_C_SOURCE=200112L -D_BSD -DB_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
+"vos-gcc","gcc:-O3 -Wall -DOPENSSL_SYSNAME_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
+"debug-vos-gcc","gcc:-O0 -g -Wall -DOPENSSL_SYSNAME_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG::(unknown):VOS:-Wl,-map:BN_LLONG:${no_asm}:::::.so:",
 
 #### Solaris x86 with GNU C setups
 # -DOPENSSL_NO_INLINE_ASM switches off inline assembler. We have to do it
@@ -209,33 +220,33 @@ my %table=(
 # actually recommend to consider using gcc shared build even with vendor
 # compiler:-)
 #						<appro@fy.chalmers.se>
-"solaris64-x86_64-gcc","gcc:-m64 -O3 -Wall -DL_ENDIAN -DMD32_REG_T=int::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:dlfcn:solaris-shared:-fPIC:-m64 -shared -static-libgcc:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-x86_64-gcc","gcc:-m64 -O3 -Wall -DL_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:solaris-shared:-fPIC:-m64 -shared -static-libgcc:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/64",
  
 #### Solaris x86 with Sun C setups
 "solaris-x86-cc","cc:-fast -O -Xa::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR:${no_asm}:dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-x86_64-cc","cc:-fast -xarch=amd64 -xstrconst -Xa -DL_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:dlfcn:solaris-shared:-KPIC:-xarch=amd64 -G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-x86_64-cc","cc:-fast -xarch=amd64 -xstrconst -Xa -DL_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:solaris-shared:-KPIC:-xarch=amd64 -G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/64",
 
 #### SPARC Solaris with GNU C setups
 "solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${no_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::sparcv8.o:des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${sparcv8_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # -m32 should be safe to add as long as driver recognizes -mcpu=ultrasparc
-"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::sparcv8plus.o:des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-gcc","gcc:-m32 -mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${sparcv9_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-gcc","gcc:-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR:${sparcv9_asm}:dlfcn:solaris-shared:-fPIC:-m64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/64",
 ####
-"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::sparcv8.o::::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -O -g -mcpu=ultrasparc -pedantic -ansi -Wall -Wshadow -Wno-long-long -D__EXTENSIONS__ -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::sparcv8plus.o:des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv8-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${sparcv8_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-gcc","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -O -g -mcpu=ultrasparc -pedantic -ansi -Wall -Wshadow -Wno-long-long -D__EXTENSIONS__ -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${sparcv9_asm}:dlfcn:solaris-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### SPARC Solaris with Sun C setups
 # SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2.
 # SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
 # SC5.0 note: Compiler common patch 107357-01 or later is required!
 "solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:${no_asm}:dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::sparcv8.o:des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR::sparcv8plus.o:des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:solaris-shared:-KPIC:-xarch=v9 -G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):/usr/ccs/bin/ar rs",
+"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:${sparcv8_asm}:dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:${sparcv9_asm}:dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR:${sparcv9_asm}:dlfcn:solaris-shared:-KPIC:-xarch=v9 -G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):/usr/ccs/bin/ar rs::/64",
 ####
-"debug-solaris-sparcv8-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR::sparcv8.o::::::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"debug-solaris-sparcv9-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR::sparcv8plus.o::::::::::dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", 
+"debug-solaris-sparcv8-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:${sparcv8_asm}:dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"debug-solaris-sparcv9-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-lsocket -lnsl -ldl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:${sparcv9_asm}:dlfcn:solaris-shared:-KPIC:-G -dy -z text:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", 
 
 #### SunOS configs, assuming sparc for the gcc one.
 #"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown):SUNOS::DES_UNROLL:${no_asm}::",
@@ -243,16 +254,16 @@ my %table=(
 
 #### IRIX 5.x configs
 # -mips2 flag is added by ./config when appropriate.
-"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR:${no_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR:${no_asm}:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR:${mips32_asm}:o32:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown):::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR:${mips32_asm}:o32:dlfcn:irix-shared:::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### IRIX 6.x configs
 # Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
 # './Configure irix-cc -o32' manually.
-"irix-mips3-gcc","gcc:-mabi=n32 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT::bn-mips3.o::::::::::dlfcn:irix-shared::-mabi=n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT::bn-mips3.o::::::::::dlfcn:irix-shared::-n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix-mips3-gcc","gcc:-mabi=n32 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:${mips64_asm}:n32:dlfcn:irix-shared::-mabi=n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
+"irix-mips3-cc", "cc:-n32 -mips3 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:${mips64_asm}:n32:dlfcn:irix-shared::-n32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::32",
 # N64 ABI builds.
-"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG::bn-mips3.o::::::::::dlfcn:irix-shared::-mabi=64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG::bn-mips3.o::::::::::dlfcn:irix-shared::-64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips64_asm}:64:dlfcn:irix-shared::-mabi=64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -G0 -rdata_shared -DTERMIOS -DB_ENDIAN -DBN_DIV3W::-D_SGI_MP_SOURCE:::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:${mips64_asm}:64:dlfcn:irix-shared::-64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 
 #### Unified HP-UX ANSI C configs.
 # Special notes:
@@ -285,26 +296,27 @@ my %table=(
 # Since there is mention of this in shlib/hpux10-cc.sh
 "hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${no_asm}:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-gcc","gcc:-march=2.0 -O3 -DB_ENDIAN -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1::pa-risc2.o::::::::::dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o::::::::::dlfcn:hpux-shared:-fpic:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc1_1-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${parisc11_asm}:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa1.1",
+"hpux-parisc2-gcc","gcc:-march=2.0 -O3 -DB_ENDIAN -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1:".eval{my $asm=$parisc20_asm;$asm=~s/2W\./2\./;$asm=~s/:64/:32/;$asm}.":dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_32",
+"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o::::::::::::::void:dlfcn:hpux-shared:-fpic:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
 
 # More attempts at unified 10.X and 11.X targets for HP C compiler.
 #
 # Chris Ruemmler <ruemmler@cup.hp.com>
 # Kevin Steves <ks@hp.se>
 "hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc1_0-cc","cc:+DAportable +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2.o::::::::::dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o::::::::::dlfcn:hpux-shared:+Z:+DD64 -b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-parisc1_1-cc","cc:+DA1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${parisc11_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa1.1",
+"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:".eval{my $asm=$parisc20_asm;$asm=~s/2W\./2\./;$asm=~s/:64/:32/;$asm}.":dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_32",
+"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${parisc20_asm}:dlfcn:hpux-shared:+Z:+DD64 -b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
 
 # HP/UX IA-64 targets
-"hpux-ia64-cc","cc:-Ae +DD32 +O2 +Olit=all -z -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT:${ia64_asm}:dlfcn:hpux-shared:+Z:+DD32 -b:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux-ia64-cc","cc:-Ae +DD32 +O2 +Olit=all -z -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT:${ia64_asm}:dlfcn:hpux-shared:+Z:+DD32 -b:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/hpux32",
 # Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
 # with debugging of the following config.
-"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT:${ia64_asm}:dlfcn:hpux-shared:+Z:+DD64 -b:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"hpux64-ia64-cc","cc:-Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT:${ia64_asm}:dlfcn:hpux-shared:+Z:+DD64 -b:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/hpux64",
 # GCC builds...
-"hpux-ia64-gcc","gcc:-O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT:${ia64_asm}:dlfcn:hpux-shared:-fpic:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"hpux64-ia64-gcc","gcc:-mlp64 -O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT:${ia64_asm}:dlfcn:hpux-shared:-fpic:-mlp64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", 
+"hpux-ia64-gcc","gcc:-O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT:${ia64_asm}:dlfcn:hpux-shared:-fpic:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/hpux32",
+"hpux64-ia64-gcc","gcc:-mlp64 -O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT:${ia64_asm}:dlfcn:hpux-shared:-fpic:-mlp64 -shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/hpux64", 
 
 # Legacy HPUX 9.X configs...
 "hpux-cc",	"cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O2 -z::(unknown)::-Wl,+s -ldld:DES_PTR DES_UNROLL DES_RISC1:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
@@ -322,9 +334,9 @@ my %table=(
 #
 # For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version
 #
-"osf1-alpha-gcc", "gcc:-O3::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:${no_asm}:dlfcn:alpha-osf1-shared:::.so",
-"osf1-alpha-cc",  "cc:-std1 -tune host -O4 -readonly_strings::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${no_asm}:dlfcn:alpha-osf1-shared:::.so",
-"tru64-alpha-cc", "cc:-std1 -tune host -fast -readonly_strings::-pthread:::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${no_asm}:dlfcn:alpha-osf1-shared::-msym:.so",
+"osf1-alpha-gcc", "gcc:-O3::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:${alpha_asm}:dlfcn:alpha-osf1-shared:::.so",
+"osf1-alpha-cc",  "cc:-std1 -tune host -O4 -readonly_strings::(unknown):::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${alpha_asm}:dlfcn:alpha-osf1-shared:::.so",
+"tru64-alpha-cc", "cc:-std1 -tune host -fast -readonly_strings::-pthread:::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${alpha_asm}:dlfcn:alpha-osf1-shared::-msym:.so",
 
 ####
 #### Variety of LINUX:-)
@@ -332,27 +344,45 @@ my %table=(
 # *-generic* is endian-neutral target, but ./config is free to
 # throw in -D[BL]_ENDIAN, whichever appropriate...
 "linux-generic32","gcc:-DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-ppc",	"gcc:-DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::linux_ppc32.o::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ppc",	"gcc:-DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:${ppc32_asm}:linux32:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+# It's believed that majority of ARM toolchains predefine appropriate -march.
+# If you compiler does not, do complement config command line with one!
+"linux-armv4",	"gcc:-DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${armv4_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 #### IA-32 targets...
 "linux-ia32-icc",	"icc:-DL_ENDIAN -DTERMIO -O2 -no_cpprt::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-KPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -march=i486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}",
+"linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -march=i486 -Wall::(unknown):::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_asm}:a.out",
 ####
 "linux-generic64","gcc:-DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-ppc64",	"gcc:-m64 -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL::linux_ppc64.o::::::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-ia64",	"gcc:-DL_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-ia64-ecc","ecc:-DL_ENDIAN -DTERMIO -O2 -Wall -no_cpprt::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-ia64-icc","icc:-DL_ENDIAN -DTERMIO -O2 -Wall -no_cpprt::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-x86_64",	"gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall -DMD32_REG_T=int::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ppc64",	"gcc:-m64 -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:${ppc64_asm}:linux64:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"linux-ia64",	"gcc:-DL_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_INT:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ia64-ecc","ecc:-DL_ENDIAN -DTERMIO -O2 -Wall -no_cpprt::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-ia64-icc","icc:-DL_ENDIAN -DTERMIO -O2 -Wall -no_cpprt::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_INT:${ia64_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-x86_64",	"gcc:-m64 -DL_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+"linux64-s390x",	"gcc:-m64 -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:${s390x_asm}:64:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
+#### So called "highgprs" target for z/Architecture CPUs
+# "Highgprs" is kernel feature first implemented in Linux 2.6.32, see
+# /proc/cpuinfo. The idea is to preserve most significant bits of
+# general purpose registers not only upon 32-bit process context
+# switch, but even on asynchronous signal delivery to such process.
+# This makes it possible to deploy 64-bit instructions even in legacy
+# application context and achieve better [or should we say adequate]
+# performance. The build is binary compatible with linux-generic32,
+# and the idea is to be able to install the resulting libcrypto.so
+# alongside generic one, e.g. as /lib/highgprs/libcrypto.so.x.y, for
+# ldconfig and run-time linker to autodiscover. Unfortunately it
+# doesn't work just yet, because of couple of bugs in glibc
+# sysdeps/s390/dl-procinfo.c affecting ldconfig and ld.so.1...
+"linux32-s390x",	"gcc:-m31 -Wa,-mzarch -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$s390x_asm;$asm=~s/bn\-s390x\.o/bn_asm.o/;$asm}.":31:dlfcn:linux-shared:-fPIC:-m31:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/highgprs",
 #### SPARC Linux setups
 # Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently
 # assisted with debugging of following two configs.
-"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::sparcv8.o:des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${sparcv8_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # it's a real mess with -mcpu=ultrasparc option under Linux, but
 # -Wa,-Av8plus should do the trick no matter what.
-"linux-sparcv9","gcc:-m32 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::sparcv8plus.o:des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:linux-shared:-fPIC:-m32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-sparcv9","gcc:-m32 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${sparcv9_asm}:dlfcn:linux-shared:-fPIC:-m32:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # GCC 3.1 is a requirement
-"linux64-sparcv9","gcc:-m64 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:ULTRASPARC:-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::::::::::dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux64-sparcv9","gcc:-m64 -mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT:ULTRASPARC:-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR:${sparcv9_asm}:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
 #### Alpha Linux with GNU C and Compaq C setups
 # Special notes:
 # - linux-alpha+bwx-gcc is ment to be used from ./config only. If you
@@ -366,28 +396,30 @@ my %table=(
 #
 #					<appro@fy.chalmers.se>
 #
-"linux-alpha-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${no_asm}",
-"linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${no_asm}",
+"linux-alpha-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:${alpha_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:${alpha_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${alpha_asm}",
+"linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::-D_REENTRANT:::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:${alpha_asm}",
 
-# Android: Linux but without -DTERMIO and pointers to headers and libs.
+# Android: linux-* but without -DTERMIO and pointers to headers and libs.
 "android","gcc:-mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"android-x86","gcc:-mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:".eval{my $asm=${x86_elf_asm};$asm=~s/:elf/:android/;$asm}.":dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"android-armv7","gcc:-march=armv7-a -mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${armv4_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 #### *BSD [do see comment about ${BSDthreads} above!]
 "BSD-generic32","gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall::${BSDthreads}:::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL:${no_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"BSD-x86",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -Wall::${BSDthreads}:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:dlfcn:bsd-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"BSD-x86",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -Wall::${BSDthreads}:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_asm}:a.out:dlfcn:bsd-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "BSD-x86-elf",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -Wall::${BSDthreads}:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "debug-BSD-x86-elf",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -Wall -g::${BSDthreads}:::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"BSD-sparcv8",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -mv8 -Wall::${BSDthreads}:::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL::sparcv8.o:des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"BSD-sparcv8",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -mv8 -Wall::${BSDthreads}:::BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL:${sparcv8_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 "BSD-generic64","gcc:-DTERMIOS -O3 -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${no_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 # -DMD32_REG_T=int doesn't actually belong in sparc64 target, it
 # simply *happens* to work around a compiler bug in gcc 3.3.3,
 # triggered by RIPEMD160 code.
-"BSD-sparc64",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -DMD32_REG_T=int -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC2_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC2 BF_PTR:::des_enc-sparc.o fcrypt_b.o:::::::::dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"BSD-ia64",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK:${ia64_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
-"BSD-x86_64",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -DMD32_REG_T=int -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"BSD-sparc64",	"gcc:-DB_ENDIAN -DTERMIOS -O3 -DMD32_REG_T=int -Wall::${BSDthreads}:::BN_LLONG RC2_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC2 BF_PTR:${sparcv9_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"BSD-ia64",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_INT:${ia64_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
+"BSD-x86_64",	"gcc:-DL_ENDIAN -DTERMIOS -O3 -Wall::${BSDthreads}:::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
 "bsdi-elf-gcc",     "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall::(unknown)::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
@@ -402,6 +434,10 @@ my %table=(
 "QNX6",       "gcc:-DTERMIOS::::-lsocket::${no_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 "QNX6-i386",  "gcc:-DL_ENDIAN -DTERMIOS -O2 -Wall::::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:bsd-gcc-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
 
+# BeOS
+"beos-x86-r5",   "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -mcpu=pentium -Wall::-D_REENTRANT:BEOS:-lbe -lnet:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:beos:beos-shared:-fPIC -DPIC:-shared:.so",
+"beos-x86-bone", "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -mcpu=pentium -Wall::-D_REENTRANT:BEOS:-lbe -lbind -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:beos:beos-shared:-fPIC:-shared:.so",
+
 #### SCO/Caldera targets.
 #
 # Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
@@ -424,12 +460,12 @@ my %table=(
 
 #### IBM's AIX.
 "aix3-cc",  "cc:-O -DB_ENDIAN -qmaxmem=16384::(unknown):AIX::BN_LLONG RC4_CHAR:::",
-"aix-gcc",  "gcc:-O -DB_ENDIAN::-pthread:AIX::BN_LLONG RC4_CHAR::aix_ppc32.o::::::::::dlfcn:aix-shared::-shared -Wl,-G:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 32",
-"aix64-gcc","gcc:-maix64 -O -DB_ENDIAN::-pthread:AIX::SIXTY_FOUR_BIT_LONG RC4_CHAR::aix_ppc64.o::::::::::dlfcn:aix-shared::-maix64 -shared -Wl,-G:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X64",
+"aix-gcc",  "gcc:-O -DB_ENDIAN::-pthread:AIX::BN_LLONG RC4_CHAR:${ppc32_asm}:aix32:dlfcn:aix-shared::-shared -Wl,-G:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X32",
+"aix64-gcc","gcc:-maix64 -O -DB_ENDIAN::-pthread:AIX::SIXTY_FOUR_BIT_LONG RC4_CHAR:${ppc64_asm}:aix64:dlfcn:aix-shared::-maix64 -shared -Wl,-G:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X64",
 # Below targets assume AIX 5. Idea is to effectively disregard $OBJECT_MODE
 # at build time. $OBJECT_MODE is respected at ./config stage!
-"aix-cc",   "cc:-q32 -O -DB_ENDIAN -qmaxmem=16384 -qro -qroconst::-qthreaded:AIX::BN_LLONG RC4_CHAR::aix_ppc32.o::::::::::dlfcn:aix-shared::-q32 -G:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 32",
-"aix64-cc", "cc:-q64 -O -DB_ENDIAN -qmaxmem=16384 -qro -qroconst::-qthreaded:AIX::SIXTY_FOUR_BIT_LONG RC4_CHAR::aix_ppc64.o::::::::::dlfcn:aix-shared::-q64 -G:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 64",
+"aix-cc",   "cc:-q32 -O -DB_ENDIAN -qmaxmem=16384 -qro -qroconst::-qthreaded:AIX::BN_LLONG RC4_CHAR:${ppc32_asm}:aix32:dlfcn:aix-shared::-q32 -G:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 32",
+"aix64-cc", "cc:-q64 -O -DB_ENDIAN -qmaxmem=16384 -qro -qroconst::-qthreaded:AIX::SIXTY_FOUR_BIT_LONG RC4_CHAR:${ppc64_asm}:aix64:dlfcn:aix-shared::-q64 -G:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::-X 64",
 
 #
 # Cray T90 and similar (SDSC)
@@ -477,28 +513,41 @@ my %table=(
 #
 "OS390-Unix","c89.sh:-O -DB_ENDIAN -DCHARSET_EBCDIC -DNO_SYS_PARAM_H  -D_ALL_SOURCE::(unknown):::THIRTY_TWO_BIT DES_PTR DES_UNROLL MD2_CHAR RC4_INDEX RC4_CHAR BF_PTR:::",
 
-# Win64 targets, WIN64I denotes IA-64 and WIN64A - AMD64
-"VC-WIN64I","cl::::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:${no_asm}:win32",
-"VC-WIN64A","cl::::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:${no_asm}:win32",
-
 # Visual C targets
-"VC-NT","cl::::WINNT::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${no_asm}:win32",
+#
+# Win64 targets, WIN64I denotes IA-64 and WIN64A - AMD64
+"VC-WIN64I","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o ia64-mont.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ghash-ia64.o::ias:win32",
+"VC-WIN64A","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:".eval{my $asm=$x86_64_asm;$asm=~s/x86_64-gcc\.o/bn_asm.o/;$asm}.":auto:win32",
+"debug-VC-WIN64I","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ghash-ia64.o::ias:win32",
+"debug-VC-WIN64A","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:".eval{my $asm=$x86_64_asm;$asm=~s/x86_64-gcc\.o/bn_asm.o/;$asm}.":auto:win32",
+# x86 Win32 target defaults to ANSI API, if you want UNICODE, complement
+# 'perl Configure VC-WIN32' with '-DUNICODE -D_UNICODE'
+"VC-WIN32","cl:-W3 -Gs0 -GF -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE:::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${x86_asm}:win32n:win32",
+# Unified CE target
+"debug-VC-WIN32","cl:-W3 -WX -Gs0 -GF -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE:::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${x86_asm}:win32n:win32",
 "VC-CE","cl::::WINCE::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${no_asm}:win32",
-"VC-WIN32","cl::::WIN32::BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}:${no_asm}:win32",
 
 # Borland C++ 4.5
 "BC-32","bcc32::::WIN32::BN_LLONG DES_PTR RC4_INDEX EXPORT_VAR_AS_FN:${no_asm}:win32",
 
 # MinGW
-"mingw", "gcc:-mno-cygwin -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall -D_WIN32_WINNT=0x333:::MINGW32:-lwsock32 -lgdi32:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts} EXPORT_VAR_AS_FN:${x86_coff_asm}:win32:cygwin-shared:-D_WINDLL -DOPENSSL_USE_APPLINK:-mno-cygwin -shared:.dll.a",
+"mingw", "gcc:-mno-cygwin -DL_ENDIAN -DWIN32_LEAN_AND_MEAN -fomit-frame-pointer -O3 -march=i486 -Wall::-D_MT:MINGW32:-lws2_32 -lgdi32 -lcrypt32:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts} EXPORT_VAR_AS_FN:${x86_asm}:coff:win32:cygwin-shared:-D_WINDLL -DOPENSSL_USE_APPLINK:-mno-cygwin:.dll.a",
+# As for OPENSSL_USE_APPLINK. Applink makes it possible to use .dll
+# compiled with one compiler with application compiled with another
+# compiler. It's possible to engage Applink support in mingw64 build,
+# but it's not done, because till mingw64 supports structured exception
+# handling, one can't seriously consider its binaries for using with
+# non-mingw64 run-time environment. And as mingw64 is always consistent
+# with itself, Applink is never engaged and can as well be omitted.
+"mingw64", "gcc:-mno-cygwin -DL_ENDIAN -O3 -Wall -DWIN32_LEAN_AND_MEAN -DUNICODE -D_UNICODE::-D_MT:MINGW64:-lws2_32 -lgdi32 -lcrypt32:SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:${x86_64_asm}:mingw64:win32:cygwin-shared:-D_WINDLL:-mno-cygwin:.dll.a",
 
 # UWIN 
 "UWIN", "cc:-DTERMIOS -DL_ENDIAN -O -Wall:::UWIN::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:win32",
 
 # Cygwin
 "Cygwin-pre1.3", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown):CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${no_asm}:win32",
-"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_coff_asm}:dlfcn:cygwin-shared:-D_WINDLL:-shared:.dll.a",
-"debug-Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:::CYGWIN32:::${no_asm}:dlfcn:cygwin-shared:-D_WINDLL:-shared:.dll.a",
+"Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall:::CYGWIN32::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_asm}:coff:dlfcn:cygwin-shared:-D_WINDLL:-shared:.dll.a",
+"debug-Cygwin", "gcc:-DTERMIOS -DL_ENDIAN -march=i486 -Wall -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DOPENSSL_NO_ASM -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:::CYGWIN32:::${no_asm}:dlfcn:cygwin-shared:-D_WINDLL:-shared:.dll.a",
 
 # NetWare from David Ward (dsward@novell.com)
 # requires either MetroWerks NLM development tools, or gcc / nlmconv
@@ -516,7 +565,7 @@ my %table=(
 "netware-libc-bsdsock-gcc", "i586-netware-gcc:-nostdinc -I/ndk/libc/include -DNETWARE_BSDSOCK -DL_ENDIAN -DNETWARE_LIBC -DOPENSSL_SYSNAME_NETWARE -DTERMIO -O2 -Wall:::::BN_LLONG ${x86_gcc_opts}::",
 
 # DJGPP
-"DJGPP", "gcc:-I/dev/env/WATT_ROOT/inc -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -Wall:::MSDOS:-L/dev/env/WATT_ROOT/lib -lwatt:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}:",
+"DJGPP", "gcc:-I/dev/env/WATT_ROOT/inc -DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O2 -Wall:::MSDOS:-L/dev/env/WATT_ROOT/lib -lwatt:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_asm}:a.out:",
 
 # Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
 "ultrix-cc","cc:-std1 -O -Olimit 2500 -DL_ENDIAN::(unknown):::::::",
@@ -526,12 +575,14 @@ my %table=(
 
 ##### MacOS X (a.k.a. Rhapsody or Darwin) setup
 "rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown):MACOSX_RHAPSODY::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${no_asm}::",
-"darwin-ppc-cc","cc:-arch ppc -O3 -DB_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::osx_ppc32.o::::::::::dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin64-ppc-cc","cc:-arch ppc64 -O3 -DB_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::osx_ppc64.o::::::::::dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin-i386-cc","cc:-arch i386 -O3 -fomit-frame-pointer -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${no_asm}:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"debug-darwin-i386-cc","cc:-arch i386 -g3 -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${no_asm}:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"darwin64-x86_64-cc","cc:-arch x86_64 -O3 -fomit-frame-pointer -DL_ENDIAN -DMD32_REG_T=int -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:${no_asm}:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
-"debug-darwin-ppc-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DB_ENDIAN -g -Wall -O::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::osx_ppc32.o::::::::::dlfcn:darwin-shared:-fPIC -fno-common:-dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin-ppc-cc","cc:-arch ppc -O3 -DB_ENDIAN -Wa,-force_cpusubtype_ALL::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc32_asm}:osx32:dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin64-ppc-cc","cc:-arch ppc64 -O3 -DB_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc64_asm}:osx64:dlfcn:darwin-shared:-fPIC -fno-common:-arch ppc64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin-i386-cc","cc:-arch i386 -O3 -fomit-frame-pointer -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:".eval{my $asm=$x86_asm;$asm=~s/cast\-586\.o//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"debug-darwin-i386-cc","cc:-arch i386 -g3 -DL_ENDIAN::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR:${x86_asm}:macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch i386 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"darwin64-x86_64-cc","cc:-arch x86_64 -O3 -DL_ENDIAN -Wall::-D_REENTRANT:MACOSX:-Wl,-search_paths_first%:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:".eval{my $asm=$x86_64_asm;$asm=~s/rc4\-[^:]+//;$asm}.":macosx:dlfcn:darwin-shared:-fPIC -fno-common:-arch x86_64 -dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+"debug-darwin-ppc-cc","cc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DB_ENDIAN -g -Wall -O::-D_REENTRANT:MACOSX::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${ppc32_asm}:osx32:dlfcn:darwin-shared:-fPIC:-dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
+# iPhoneOS/iOS
+"iphoneos-cross","llvm-gcc:-O3 -isysroot \$(CROSS_TOP)/SDKs/\$(CROSS_SDK) -fomit-frame-pointer -fno-common::-D_REENTRANT:iOS:-Wl,-search_paths_first%:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:${no_asm}:dlfcn:darwin-shared:-fPIC -fno-common:-dynamiclib:.\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
 
 ##### A/UX
 "aux3-gcc","gcc:-O2 -DTERMIO::(unknown):AUX:-lbsd:RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::",
@@ -546,20 +597,28 @@ my %table=(
 "OS2-EMX", "gcc::::::::",
 
 ##### VxWorks for various targets
+"vxworks-ppc60x","ccppc:-D_REENTRANT -mrtp -mhard-float -mstrict-align -fno-implicit-fp -DPPC32_fp60x -O2 -fstrength-reduce -fno-builtin -fno-strict-aliasing -Wall -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/usr/h/wrn/coreip:::VXWORKS:-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/common:::::",
+"vxworks-ppcgen","ccppc:-D_REENTRANT -mrtp -msoft-float -mstrict-align -O1 -fno-builtin -fno-strict-aliasing -Wall -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/usr/h/wrn/coreip:::VXWORKS:-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/sfcommon:::::",
 "vxworks-ppc405","ccppc:-g -msoft-float -mlongcall -DCPU=PPC405 -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
 "vxworks-ppc750","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h \$(DEBUG_FLAG):::VXWORKS:-r:::::",
-"vxworks-ppc750-debug","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g:::VXWORKS:-r:::::",
+"vxworks-ppc750-debug","ccppc:-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g:::VXWORKS:-r:::::",
 "vxworks-ppc860","ccppc:-nostdinc -msoft-float -DCPU=PPC860 -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r:::::",
-"vxworks-mipsle","ccmips:-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -DL_ENDIAN -EL -Wl,-EL -mips2 -mno-branch-likely -G 0 -fno-builtin -msoft-float -DCPU=MIPS32 -DMIPSEL -DNO_STRINGS_H -I\$(WIND_BASE)/target/h:::VXWORKS:-r::${no_asm}::::::ranlibmips:",
+"vxworks-simlinux","ccpentium:-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\" -DL_ENDIAN -DCPU=SIMLINUX -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I\$(WIND_BASE)/target/h -I\$(WIND_BASE)/target/h/wrn/coreip -DOPENSSL_NO_HW_PADLOCK:::VXWORKS:-r::${no_asm}::::::ranlibpentium:",
+"vxworks-mips","ccmips:-mrtp -mips2 -O -G 0 -B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\" -DCPU=MIPS32 -msoft-float -mno-branch-likely -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/h/wrn/coreip::-D_REENTRANT:VXWORKS:-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/mips/MIPSI32/sfcommon::${mips32_asm}:o32::::::ranlibmips:",
 
 ##### Compaq Non-Stop Kernel (Tandem)
 "tandem-c89","c89:-Ww -D__TANDEM -D_XOPEN_SOURCE -D_XOPEN_SOURCE_EXTENDED=1 -D_TANDEM_SOURCE -DB_ENDIAN::(unknown):::THIRTY_TWO_BIT:::",
 
+# uClinux
+"uClinux-dist","$ENV{'CC'}:\$(CFLAGS)::-D_REENTRANT::\$(LDFLAGS) \$(LDLIBS):BN_LLONG:${no_asm}:$ENV{'LIBSSL_dlfcn'}:linux-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):$ENV{'RANLIB'}::",
+"uClinux-dist64","$ENV{'CC'}:\$(CFLAGS)::-D_REENTRANT::\$(LDFLAGS) \$(LDLIBS):SIXTY_FOUR_BIT_LONG:${no_asm}:$ENV{'LIBSSL_dlfcn'}:linux-shared:-fPIC:-shared:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):$ENV{'RANLIB'}::",
+
 );
 
 my @MK1MF_Builds=qw(VC-WIN64I VC-WIN64A
-		    VC-NT VC-CE VC-WIN32
-		    BC-32 OS2-EMX
+		    debug-VC-WIN64I debug-VC-WIN64A
+		    VC-NT VC-CE VC-WIN32 debug-VC-WIN32
+		    BC-32 
 		    netware-clib netware-clib-bsdsock
 		    netware-libc netware-libc-bsdsock);
 
@@ -582,6 +641,11 @@ my $idx_cast_obj = $idx++;
 my $idx_rc4_obj = $idx++;
 my $idx_rmd160_obj = $idx++;
 my $idx_rc5_obj = $idx++;
+my $idx_wp_obj = $idx++;
+my $idx_cmll_obj = $idx++;
+my $idx_modes_obj = $idx++;
+my $idx_engines_obj = $idx++;
+my $idx_perlasm_scheme = $idx++;
 my $idx_dso_scheme = $idx++;
 my $idx_shared_target = $idx++;
 my $idx_shared_cflag = $idx++;
@@ -589,6 +653,7 @@ my $idx_shared_ldflag = $idx++;
 my $idx_shared_extension = $idx++;
 my $idx_ranlib = $idx++;
 my $idx_arflags = $idx++;
+my $idx_multilib = $idx++;
 
 my $prefix="";
 my $libdir="";
@@ -596,10 +661,8 @@ my $openssldir="";
 my $exe_ext="";
 my $install_prefix= "$ENV{'INSTALL_PREFIX'}";
 my $cross_compile_prefix="";
-my $fipslibdir="/usr/local/ssl/fips-1.0/lib/";
-my $nofipscanistercheck=0;
-my $fipsdso=0;
-my $fipscanisterinternal="n";
+my $fipsdir="/usr/local/ssl/fips-2.0";
+my $fipslibdir="";
 my $baseaddr="0xFB00000";
 my $no_threads=0;
 my $threads=0;
@@ -607,7 +670,6 @@ my $no_shared=0; # but "no-shared" is default
 my $zlib=1;      # but "no-zlib" is default
 my $no_krb5=0;   # but "no-krb5" is implied unless "--with-krb5-..." is used
 my $no_rfc3779=1; # but "no-rfc3779" is default
-my $montasm=1;   # but "no-montasm" is default
 my $no_asm=0;
 my $no_dso=0;
 my $no_gmp=0;
@@ -624,7 +686,6 @@ my $rc2	="crypto/rc2/rc2.h";
 my $bf	="crypto/bf/bf_locl.h";
 my $bn_asm	="bn_asm.o";
 my $des_enc="des_enc.o fcrypt_b.o";
-my $fips_des_enc="fips_des_enc.o";
 my $aes_enc="aes_core.o aes_cbc.o";
 my $bf_enc	="bf_enc.o";
 my $cast_enc="c_enc.o";
@@ -633,35 +694,38 @@ my $rc5_enc="rc5_enc.o";
 my $md5_obj="";
 my $sha1_obj="";
 my $rmd160_obj="";
+my $cmll_enc="camellia.o cmll_misc.o cmll_cbc.o";
 my $processor="";
 my $default_ranlib;
 my $perl;
 my $fips=0;
 
+if (exists $ENV{FIPSDIR})
+	{
+	$fipsdir = $ENV{FIPSDIR};
+	$fipsdir =~ s/\/$//;
+	}
 
 # All of the following is disabled by default (RC5 was enabled before 0.9.8):
 
 my %disabled = ( # "what"         => "comment" [or special keyword "experimental"]
-                 "camellia"       => "default",
-                 "capieng"        => "default",
-                 "cms"            => "default",
-                 "gmp"            => "default",
-                 "jpake"          => "experimental",
-                 "mdc2"           => "default",
-                 "montasm"        => "default", # explicit option in 0.9.8 only (implicitly enabled in 0.9.9)
-                 "rc5"            => "default",
-                 "rfc3779"        => "default",
-                 "seed"           => "default",
-                 "shared"         => "default",
-                 "zlib"           => "default",
-                 "zlib-dynamic"   => "default"
-               );
+		 "ec_nistp_64_gcc_128" => "default",
+		 "gmp"		  => "default",
+		 "jpake"          => "experimental",
+		 "md2"            => "default",
+		 "rc5"            => "default",
+		 "rfc3779"	  => "default",
+		 "sctp"       => "default",
+		 "shared"         => "default",
+		 "store"	  => "experimental",
+		 "zlib"           => "default",
+		 "zlib-dynamic"   => "default"
+	       );
 my @experimental = ();
 
 # This is what $depflags will look like with the above defaults
 # (we need this to see if we should advise the user to run "make depend"):
-my $default_depflags = " -DOPENSSL_NO_CAMELLIA -DOPENSSL_NO_CAPIENG -DOPENSSL_NO_CMS -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MDC2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SEED";
-
+my $default_depflags = " -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SCTP -DOPENSSL_NO_STORE";
 
 # Explicit "no-..." options will be collected in %disabled along with the defaults.
 # To remove something from %disabled, use "enable-foo" (unless it's experimental).
@@ -719,6 +783,7 @@ PROCESS_ARGS:
 
 		# rewrite some options in "enable-..." form
 		s /^-?-?shared$/enable-shared/;
+		s /^sctp$/enable-sctp/;
 		s /^threads$/enable-threads/;
 		s /^zlib$/enable-zlib/;
 		s /^zlib-dynamic$/enable-zlib-dynamic/;
@@ -740,8 +805,8 @@ PROCESS_ARGS:
 					{
 					$disabled{$1} = "option";
 					}
-				}
-			}			
+				}			
+			}
 		elsif (/^enable-(.+)$/ || /^experimental-(.+)$/)
 			{
 			my $algo = $1;
@@ -791,41 +856,22 @@ PROCESS_ARGS:
 		elsif (/^fips$/)
 			{
 			$fips=1;
-		        }
+			}
 		elsif (/^rsaref$/)
 			{
 			# No RSAref support any more since it's not needed.
 			# The check for the option is there so scripts aren't
 			# broken
 			}
-		elsif (/^nofipscanistercheck$/)
-			{
-			$fips = 1;
-			$nofipscanistercheck = 1;
-			}
-		elsif (/^fipscanisterbuild$/)
-			{
-			$fips = 1;
-			$nofipscanistercheck = 1;
-			$fipslibdir="";
-			$fipscanisterinternal="y";
-			}
-		elsif (/^fipsdso$/)
-			{
-			$fips = 1;
-			$nofipscanistercheck = 1;
-			$fipslibdir="";
-			$fipscanisterinternal="y";
-			$fipsdso = 1;
-			}
 		elsif (/^[-+]/)
 			{
-			if (/^-[lL](.*)$/)
+			if (/^-[lL](.*)$/ or /^-Wl,/)
 				{
 				$libs.=$_." ";
 				}
 			elsif (/^-[^-]/ or /^\+/)
 				{
+				$_ =~ s/%([0-9a-f]{1,2})/chr(hex($1))/gei;
 				$flags.=$_." ";
 				}
 			elsif (/^--prefix=(.*)$/)
@@ -856,14 +902,22 @@ PROCESS_ARGS:
 				{
 				$withargs{"zlib-include"}="-I$1";
 				}
+			elsif (/^--with-fipsdir=(.*)$/)
+				{
+				$fipsdir="$1";
+				}
 			elsif (/^--with-fipslibdir=(.*)$/)
 				{
-				$fipslibdir="$1/";
+				$fipslibdir="$1";
 				}
 			elsif (/^--with-baseaddr=(.*)$/)
 				{
 				$baseaddr="$1";
 				}
+			elsif (/^--cross-compile-prefix=(.*)$/)
+				{
+				$cross_compile_prefix=$1;
+				}
 			else
 				{
 				print STDERR $usage;
@@ -934,6 +988,17 @@ if (defined($disabled{"md5"}) || defined($disabled{"rsa"}))
 	$disabled{"ssl2"} = "forced";
 	}
 
+if ($fips && $fipslibdir eq "")
+	{
+	$fipslibdir = $fipsdir . "/lib/";
+	}
+
+# RSAX ENGINE sets default non-FIPS RSA method.
+if ($fips)
+	{
+	$disabled{"rsax"} = "forced";
+	}
+
 # SSL 3.0 and TLS requires MD5 and SHA and either RSA or DSA+DH
 if (defined($disabled{"md5"}) || defined($disabled{"sha"})
     || (defined($disabled{"rsa"})
@@ -948,6 +1013,19 @@ if (defined($disabled{"tls1"}))
 	$disabled{"tlsext"} = "forced";
 	}
 
+if (defined($disabled{"ec"}) || defined($disabled{"dsa"})
+    || defined($disabled{"dh"}))
+	{
+	$disabled{"gost"} = "forced";
+	}
+
+# SRP and HEARTBEATS require TLSEXT
+if (defined($disabled{"tlsext"}))
+	{
+	$disabled{"srp"} = "forced";
+	$disabled{"heartbeats"} = "forced";
+	}
+
 if ($target eq "TABLE") {
 	foreach $target (sort keys %table) {
 		print_table_entry($target);
@@ -971,55 +1049,6 @@ print "Configuring for $target\n";
 
 &usage if (!defined($table{$target}));
 
-my @fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
-my $cc = $fields[$idx_cc];
-# Allow environment CC to override compiler...
-if($ENV{CC}) {
-    $cc = $ENV{CC};
-}
-my $cflags = $fields[$idx_cflags];
-my $unistd = $fields[$idx_unistd];
-my $thread_cflag = $fields[$idx_thread_cflag];
-my $sys_id = $fields[$idx_sys_id];
-my $lflags = $fields[$idx_lflags];
-my $bn_ops = $fields[$idx_bn_ops];
-my $cpuid_obj = $fields[$idx_cpuid_obj];
-my $bn_obj = $fields[$idx_bn_obj];
-my $des_obj = $fields[$idx_des_obj];
-my $aes_obj = $fields[$idx_aes_obj];
-my $bf_obj = $fields[$idx_bf_obj];
-my $md5_obj = $fields[$idx_md5_obj];
-my $sha1_obj = $fields[$idx_sha1_obj];
-my $cast_obj = $fields[$idx_cast_obj];
-my $rc4_obj = $fields[$idx_rc4_obj];
-my $rmd160_obj = $fields[$idx_rmd160_obj];
-my $rc5_obj = $fields[$idx_rc5_obj];
-my $dso_scheme = $fields[$idx_dso_scheme];
-my $shared_target = $fields[$idx_shared_target];
-my $shared_cflag = $fields[$idx_shared_cflag];
-my $shared_ldflag = $fields[$idx_shared_ldflag];
-my $shared_extension = $fields[$idx_shared_extension];
-my $ranlib = $ENV{'RANLIB'} || $fields[$idx_ranlib];
-my $ar = $ENV{'AR'} || "ar";
-my $arflags = $fields[$idx_arflags];
-
-if ($fips)
-	{
-	delete $disabled{"shared"} if ($disabled{"shared"} eq "default");
-	$disabled{"asm"}="forced"
-		if ($target !~ "VC\-.*" &&
-		    "$cpuid_obj:$bn_obj:$aes_obj:$des_obj:$sha1_obj" eq "::::");
-	}
-
-foreach (sort @experimental)
-	{
-	my $ALGO;
-	($ALGO = $_) =~ tr/[a-z]/[A-Z]/;
-
-	# opensslconf.h will set OPENSSL_NO_... unless OPENSSL_EXPERIMENTAL_... is defined
-	$openssl_experimental_defines .= "#define OPENSSL_NO_$ALGO\n";
-	$cflags .= " -DOPENSSL_EXPERIMENTAL_$ALGO";
-	}
 
 foreach (sort (keys %disabled))
 	{
@@ -1035,8 +1064,6 @@ foreach (sort (keys %disabled))
 		{ $no_shared = 1; }
 	elsif (/^zlib$/)
 		{ $zlib = 0; }
-	elsif (/^montasm$/)
-		{ $montasm = 0; }
 	elsif (/^static-engine$/)
 		{ }
 	elsif (/^zlib-dynamic$/)
@@ -1048,7 +1075,7 @@ foreach (sort (keys %disabled))
 	else
 		{
 		my ($ALGO, $algo);
-		($ALGO = $algo = $_) =~ tr/[a-z]/[A-Z]/;
+		($ALGO = $algo = $_) =~ tr/[\-a-z]/[_A-Z]/;
 
 		if (/^asm$/ || /^err$/ || /^hw$/ || /^hw-/)
 			{
@@ -1068,6 +1095,8 @@ foreach (sort (keys %disabled))
 			else
 				{
 				push @skip, $algo;
+				# fix-up crypto/directory name(s)
+				@skip[$#skip]="whrlpool" if $algo eq "whirlpool";
 				print " (skip dir)";
 
 				$depflags .= " -DOPENSSL_NO_$ALGO";
@@ -1078,30 +1107,25 @@ foreach (sort (keys %disabled))
 	print "\n";
 	}
 
-my $IsMK1MF=scalar grep /^$target$/,@MK1MF_Builds;
+my $exp_cflags = "";
+foreach (sort @experimental)
+	{
+	my $ALGO;
+	($ALGO = $_) =~ tr/[a-z]/[A-Z]/;
 
-$IsMK1MF=1 if ($target eq "mingw" && $^O ne "cygwin" && !is_msys());
+	# opensslconf.h will set OPENSSL_NO_... unless OPENSSL_EXPERIMENTAL_... is defined
+	$openssl_experimental_defines .= "#define OPENSSL_NO_$ALGO\n";
+	$exp_cflags .= " -DOPENSSL_EXPERIMENTAL_$ALGO";
+	}
 
-$no_shared = 0 if ($fipsdso && !$IsMK1MF);
+my $IsMK1MF=scalar grep /^$target$/,@MK1MF_Builds;
 
-$exe_ext=".exe" if ($target eq "Cygwin" || $target eq "DJGPP" || $target eq "mingw");
+$exe_ext=".exe" if ($target eq "Cygwin" || $target eq "DJGPP" || $target =~ /^mingw/);
 $exe_ext=".nlm" if ($target =~ /netware/);
 $exe_ext=".pm"  if ($target =~ /vos/);
-if ($openssldir eq "" and $prefix eq "")
-	{
-	if ($fips)
-		{
-		$openssldir="/usr/local/ssl/fips";
-		}
-	else
-		{
-		$openssldir="/usr/local/ssl";
-		}
-	}
+$openssldir="/usr/local/ssl" if ($openssldir eq "" and $prefix eq "");
 $prefix=$openssldir if $prefix eq "";
 
-$libdir="lib" if $libdir eq "";
-
 $default_ranlib= &which("ranlib") or $default_ranlib="true";
 $perl=$ENV{'PERL'} or $perl=&which("perl5") or $perl=&which("perl")
   or $perl="perl";
@@ -1118,10 +1142,64 @@ $openssldir=$prefix . "/" . $openssldir if $openssldir !~ /(^\/|^[a-zA-Z]:[\\\/]
 
 print "IsMK1MF=$IsMK1MF\n";
 
+my @fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
+my $cc = $fields[$idx_cc];
+# Allow environment CC to override compiler...
+if($ENV{CC}) {
+    $cc = $ENV{CC};
+}
+my $cflags = $fields[$idx_cflags];
+my $unistd = $fields[$idx_unistd];
+my $thread_cflag = $fields[$idx_thread_cflag];
+my $sys_id = $fields[$idx_sys_id];
+my $lflags = $fields[$idx_lflags];
+my $bn_ops = $fields[$idx_bn_ops];
+my $cpuid_obj = $fields[$idx_cpuid_obj];
+my $bn_obj = $fields[$idx_bn_obj];
+my $des_obj = $fields[$idx_des_obj];
+my $aes_obj = $fields[$idx_aes_obj];
+my $bf_obj = $fields[$idx_bf_obj];
+my $md5_obj = $fields[$idx_md5_obj];
+my $sha1_obj = $fields[$idx_sha1_obj];
+my $cast_obj = $fields[$idx_cast_obj];
+my $rc4_obj = $fields[$idx_rc4_obj];
+my $rmd160_obj = $fields[$idx_rmd160_obj];
+my $rc5_obj = $fields[$idx_rc5_obj];
+my $wp_obj = $fields[$idx_wp_obj];
+my $cmll_obj = $fields[$idx_cmll_obj];
+my $modes_obj = $fields[$idx_modes_obj];
+my $engines_obj = $fields[$idx_engines_obj];
+my $perlasm_scheme = $fields[$idx_perlasm_scheme];
+my $dso_scheme = $fields[$idx_dso_scheme];
+my $shared_target = $fields[$idx_shared_target];
+my $shared_cflag = $fields[$idx_shared_cflag];
+my $shared_ldflag = $fields[$idx_shared_ldflag];
+my $shared_extension = $fields[$idx_shared_extension];
+my $ranlib = $ENV{'RANLIB'} || $fields[$idx_ranlib];
+my $ar = $ENV{'AR'} || "ar";
+my $arflags = $fields[$idx_arflags];
+my $multilib = $fields[$idx_multilib];
+
+# if $prefix/lib$multilib is not an existing directory, then
+# assume that it's not searched by linker automatically, in
+# which case adding $multilib suffix causes more grief than
+# we're ready to tolerate, so don't...
+$multilib="" if !-d "$prefix/lib$multilib";
+
+$libdir="lib$multilib" if $libdir eq "";
+
+$cflags = "$cflags$exp_cflags";
+
 # '%' in $lflags is used to split flags to "pre-" and post-flags
 my ($prelflags,$postlflags)=split('%',$lflags);
-if (defined($postlflags))	{ $lflags=$postlflags;  }
-else				{ $lflags=$prelflags; undef $prelflags; }
+if (defined($postlflags))	{ $lflags=$postlflags;	}
+else				{ $lflags=$prelflags; undef $prelflags;	}
+
+if ($target =~ /^mingw/ && `$cc --target-help 2>&1` !~ m/\-mno\-cygwin/m)
+	{
+	$cflags =~ s/\-mno\-cygwin\s*//;
+	$shared_ldflag =~ s/\-mno\-cygwin\s*//;
+	}
 
 my $no_shared_warn=0;
 my $no_user_cflags=0;
@@ -1249,18 +1327,9 @@ $lflags="$libs$lflags" if ($libs ne "");
 
 if ($no_asm)
 	{
-	$cpuid_obj=$bn_obj=$des_obj=$aes_obj=$bf_obj=$cast_obj=$rc4_obj=$rc5_obj="";
-	$sha1_obj=$md5_obj=$rmd160_obj="";
-	$cflags=~s/\-D[BL]_ENDIAN//		if ($fips);
-	$thread_cflags=~s/\-D[BL]_ENDIAN//	if ($fips);
-	}
-if ($montasm)
-	{
-	$bn_obj =~ s/MAYBE-MO86-/mo86-/;
-	}
-else
-	{
-	$bn_obj =~ s/MAYBE-MO86-[a-z.]*//;
+	$cpuid_obj=$bn_obj=
+	$des_obj=$aes_obj=$bf_obj=$cast_obj=$rc4_obj=$rc5_obj=$cmll_obj=
+	$modes_obj=$sha1_obj=$md5_obj=$rmd160_obj=$wp_obj=$engines_obj="";
 	}
 
 if (!$no_shared)
@@ -1279,7 +1348,14 @@ if ($zlib)
 	$cflags = "-DZLIB $cflags";
 	if (defined($disabled{"zlib-dynamic"}))
 		{
-		$lflags = "$lflags -lz";
+		if (defined($withargs{"zlib-lib"}))
+			{
+			$lflags = "$lflags -L" . $withargs{"zlib-lib"} . " -lz";
+			}
+		else
+			{
+			$lflags = "$lflags -lz";
+			}
 		}
 	else
 		{
@@ -1291,7 +1367,7 @@ if ($zlib)
 my $shared_mark = "";
 if ($shared_target eq "")
 	{
-	$no_shared_warn = 1 if !$no_shared && !$fips;
+	$no_shared_warn = 1 if !$no_shared;
 	$no_shared = 1;
 	}
 if (!$no_shared)
@@ -1304,17 +1380,20 @@ if (!$no_shared)
 
 if (!$IsMK1MF)
 	{
+	# add {no-}static-engine to options to allow mkdef.pl to work without extra arguments
 	if ($no_shared)
 		{
 		$openssl_other_defines.="#define OPENSSL_NO_DYNAMIC_ENGINE\n";
+		$options.=" static-engine";
 		}
 	else
 		{
 		$openssl_other_defines.="#define OPENSSL_NO_STATIC_ENGINE\n";
+		$options.=" no-static-engine";
 		}
 	}
 
-$cpuid_obj.=" uplink.o uplink-cof.o" if ($cflags =~ /\-DOPENSSL_USE_APPLINK/);
+$cpuid_obj.=" uplink.o uplink-x86.o" if ($cflags =~ /\-DOPENSSL_USE_APPLINK/);
 
 #
 # Platform fix-ups
@@ -1377,17 +1456,21 @@ if ($ranlib eq "")
 $cpuid_obj="" if ($processor eq "386");
 
 $bn_obj = $bn_asm unless $bn_obj ne "";
-# bn86* is the only one implementing bn_*_part_words
-$cflags.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($bn_obj =~ /bn86/);
-$cflags.=" -DOPENSSL_IA32_SSE2" if (!$no_sse2 && $bn_obj =~ /bn86/);
+# bn-586 is the only one implementing bn_*_part_words
+$cflags.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($bn_obj =~ /bn-586/);
+$cflags.=" -DOPENSSL_IA32_SSE2" if (!$no_sse2 && $bn_obj =~ /86/);
 
-$cflags.=" -DOPENSSL_BN_ASM_MONT" if ($bn_obj =~ /\-mont|mo86\-/);
+$cflags.=" -DOPENSSL_BN_ASM_MONT" if ($bn_obj =~ /-mont/);
+$cflags.=" -DOPENSSL_BN_ASM_MONT5" if ($bn_obj =~ /-mont5/);
+$cflags.=" -DOPENSSL_BN_ASM_GF2m" if ($bn_obj =~ /-gf2m/);
 
 if ($fips)
 	{
 	$openssl_other_defines.="#define OPENSSL_FIPS\n";
+	$cflags .= " -I\$(FIPSDIR)/include";
 	}
 
+$cpuid_obj="mem_clr.o"	unless ($cpuid_obj =~ /\.o$/);
 $des_obj=$des_enc	unless ($des_obj =~ /\.o$/);
 $bf_obj=$bf_enc		unless ($bf_obj =~ /\.o$/);
 $cast_obj=$cast_enc	unless ($cast_obj =~ /\.o$/);
@@ -1419,10 +1502,31 @@ if ($rmd160_obj =~ /\.o$/)
 if ($aes_obj =~ /\.o$/)
 	{
 	$cflags.=" -DAES_ASM";
+	# aes-ctr.o is not a real file, only indication that assembler
+	# module implements AES_ctr32_encrypt...
+	$cflags.=" -DAES_CTR_ASM" if ($aes_obj =~ s/\s*aes\-ctr\.o//);
+	# aes-xts.o indicates presense of AES_xts_[en|de]crypt...
+	$cflags.=" -DAES_XTS_ASM" if ($aes_obj =~ s/\s*aes\-xts\.o//);
+	$aes_obj =~ s/\s*(vpaes|aesni)\-x86\.o//g if ($no_sse2);
+	$cflags.=" -DVPAES_ASM" if ($aes_obj =~ m/vpaes/);
+	$cflags.=" -DBSAES_ASM" if ($aes_obj =~ m/bsaes/);
 	}
 else	{
 	$aes_obj=$aes_enc;
 	}
+$wp_obj="" if ($wp_obj =~ /mmx/ && $processor eq "386");
+if ($wp_obj =~ /\.o$/ && !$disabled{"whirlpool"})
+	{
+	$cflags.=" -DWHIRLPOOL_ASM";
+	}
+else	{
+	$wp_obj="wp_block.o";
+	}
+$cmll_obj=$cmll_enc	unless ($cmll_obj =~ /.o$/);
+if ($modes_obj =~ /ghash/)
+	{
+	$cflags.=" -DGHASH_ASM";
+	}
 
 # "Stringify" the C flags string.  This permits it to be made part of a string
 # and works as well on command lines.
@@ -1482,13 +1586,13 @@ while (<IN>)
 	if ($sdirs) {
 		my $dir;
 		foreach $dir (@skip) {
-			s/(\s)$dir\s/$1/;
+			s/(\s)$dir /$1/;
 			s/\s$dir$//;
 			}
 		}
 	$sdirs = 0 unless /\\$/;
-        s/fips // if (/^DIRS=/ && !$fips);
         s/engines // if (/^DIRS=/ && $disabled{"engine"});
+	s/ccgost// if (/^ENGDIRS=/ && $disabled{"gost"});
 	s/^VERSION=.*/VERSION=$version/;
 	s/^MAJOR=.*/MAJOR=$major/;
 	s/^MINOR=.*/MINOR=$minor/;
@@ -1498,6 +1602,7 @@ while (<IN>)
 	s/^SHLIB_MINOR=.*/SHLIB_MINOR=$shlib_minor/;
 	s/^SHLIB_EXT=.*/SHLIB_EXT=$shared_extension/;
 	s/^INSTALLTOP=.*$/INSTALLTOP=$prefix/;
+	s/^MULTILIB=.*$/MULTILIB=$multilib/;
 	s/^OPENSSLDIR=.*$/OPENSSLDIR=$openssldir/;
 	s/^LIBDIR=.*$/LIBDIR=$libdir/;
 	s/^INSTALL_PREFIX=.*$/INSTALL_PREFIX=$install_prefix/;
@@ -1508,14 +1613,16 @@ while (<IN>)
 		{
 		s/^CC=.*$/CROSS_COMPILE= $cross_compile_prefix\nCC= \$\(CROSS_COMPILE\)$cc/;
 		s/^AR=\s*/AR= \$\(CROSS_COMPILE\)/;
+		s/^NM=\s*/NM= \$\(CROSS_COMPILE\)/;
 		s/^RANLIB=\s*/RANLIB= \$\(CROSS_COMPILE\)/;
+		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= \$\(CROSS_COMPILE\)$cc/ if $cc eq "gcc";
 		}
 	else	{
 		s/^CC=.*$/CC= $cc/;
 		s/^AR=\s*ar/AR= $ar/;
 		s/^RANLIB=.*/RANLIB= $ranlib/;
+		s/^MAKEDEPPROG=.*$/MAKEDEPPROG= $cc/ if $cc eq "gcc";
 		}
-	s/^MAKEDEPPROG=.*$/MAKEDEPPROG= $cc/ if $cc eq "gcc";
 	s/^CFLAG=.*$/CFLAG= $cflags/;
 	s/^DEPFLAG=.*$/DEPFLAG=$depflags/;
 	s/^PEX_LIBS=.*$/PEX_LIBS= $prelflags/;
@@ -1524,7 +1631,7 @@ while (<IN>)
 	s/^CPUID_OBJ=.*$/CPUID_OBJ= $cpuid_obj/;
 	s/^BN_ASM=.*$/BN_ASM= $bn_obj/;
 	s/^DES_ENC=.*$/DES_ENC= $des_obj/;
-	s/^AES_ASM_OBJ=.*$/AES_ASM_OBJ= $aes_obj/;
+	s/^AES_ENC=.*$/AES_ENC= $aes_obj/;
 	s/^BF_ENC=.*$/BF_ENC= $bf_obj/;
 	s/^CAST_ENC=.*$/CAST_ENC= $cast_obj/;
 	s/^RC4_ENC=.*$/RC4_ENC= $rc4_obj/;
@@ -1532,6 +1639,11 @@ while (<IN>)
 	s/^MD5_ASM_OBJ=.*$/MD5_ASM_OBJ= $md5_obj/;
 	s/^SHA1_ASM_OBJ=.*$/SHA1_ASM_OBJ= $sha1_obj/;
 	s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/;
+	s/^WP_ASM_OBJ=.*$/WP_ASM_OBJ= $wp_obj/;
+	s/^CMLL_ENC=.*$/CMLL_ENC= $cmll_obj/;
+	s/^MODES_ASM_OBJ.=*$/MODES_ASM_OBJ= $modes_obj/;
+	s/^ENGINES_ASM_OBJ.=*$/ENGINES_ASM_OBJ= $engines_obj/;
+	s/^PERLASM_SCHEME=.*$/PERLASM_SCHEME= $perlasm_scheme/;
 	s/^PROCESSOR=.*/PROCESSOR= $processor/;
 	s/^ARFLAGS=.*/ARFLAGS= $arflags/;
 	s/^PERL=.*/PERL= $perl/;
@@ -1539,24 +1651,15 @@ while (<IN>)
 	s/^LIBKRB5=.*/LIBKRB5=$withargs{"krb5-lib"}/;
 	s/^LIBZLIB=.*/LIBZLIB=$withargs{"zlib-lib"}/;
 	s/^ZLIB_INCLUDE=.*/ZLIB_INCLUDE=$withargs{"zlib-include"}/;
+
+	s/^FIPSDIR=.*/FIPSDIR=$fipsdir/;
 	s/^FIPSLIBDIR=.*/FIPSLIBDIR=$fipslibdir/;
-	if ($fipsdso)
-		{
-		s/^FIPSCANLIB=.*/FIPSCANLIB=libfips/;
-		s/^SHARED_FIPS=.*/SHARED_FIPS=libfips\$(SHLIB_EXT)/;
-		s/^SHLIBDIRS=.*/SHLIBDIRS= crypto ssl fips/;
-		}
-	else
-		{
-		s/^FIPSCANLIB=.*/FIPSCANLIB=libcrypto/ if $fips;
-		s/^SHARED_FIPS=.*/SHARED_FIPS=/;
-		s/^SHLIBDIRS=.*/SHLIBDIRS= crypto ssl/;
-		}
-	s/^FIPSCANISTERINTERNAL=.*/FIPSCANISTERINTERNAL=$fipscanisterinternal/;
+	s/^FIPSCANLIB=.*/FIPSCANLIB=libcrypto/ if $fips;
 	s/^BASEADDR=.*/BASEADDR=$baseaddr/;
+
 	s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/;
 	s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/;
-	s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_FIPS) \$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
+	s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared);
 	if ($shared_extension ne "" && $shared_extension =~ /^\.s([ol])\.[^\.]*$/)
 		{
 		my $sotmp = $1;
@@ -1589,7 +1692,7 @@ print "EX_LIBS       =$lflags\n";
 print "CPUID_OBJ     =$cpuid_obj\n";
 print "BN_ASM        =$bn_obj\n";
 print "DES_ENC       =$des_obj\n";
-print "AES_ASM_OBJ   =$aes_obj\n";
+print "AES_ENC       =$aes_obj\n";
 print "BF_ENC        =$bf_obj\n";
 print "CAST_ENC      =$cast_obj\n";
 print "RC4_ENC       =$rc4_obj\n";
@@ -1597,6 +1700,9 @@ print "RC5_ENC       =$rc5_obj\n";
 print "MD5_OBJ_ASM   =$md5_obj\n";
 print "SHA1_OBJ_ASM  =$sha1_obj\n";
 print "RMD160_OBJ_ASM=$rmd160_obj\n";
+print "CMLL_ENC      =$cmll_obj\n";
+print "MODES_OBJ     =$modes_obj\n";
+print "ENGINES_OBJ   =$engines_obj\n";
 print "PROCESSOR     =$processor\n";
 print "RANLIB        =$ranlib\n";
 print "ARFLAGS       =$arflags\n";
@@ -1684,7 +1790,7 @@ print OUT "#ifdef OPENSSL_ALGORITHM_DEFINES\n";
 print OUT $openssl_algorithm_defines_trans;
 print OUT "#endif\n\n";
 
-print OUT "#define OPENSSL_CPUID_OBJ\n\n" if ($cpuid_obj);
+print OUT "#define OPENSSL_CPUID_OBJ\n\n" if ($cpuid_obj ne "mem_clr.o");
 
 while (<IN>)
 	{
@@ -1696,10 +1802,7 @@ while (<IN>)
 		}
 	elsif	(/^#define\s+ENGINESDIR/)
 		{
-		# $foo is to become "$prefix/lib$multilib/engines";
-		# as Makefile.org and engines/Makefile are adapted for
-		# $multilib suffix.
-		my $foo = "$prefix/lib/engines";
+		my $foo = "$prefix/$libdir/engines";
 		$foo =~ s/\\/\\\\/g;
 		print OUT "#define ENGINESDIR \"$foo\"\n";
 		}
@@ -1865,16 +1968,9 @@ BEGIN
     BEGIN
 	BLOCK "040904b0"
 	BEGIN
-#if defined(FIPS)
-	    VALUE "Comments", "WARNING: TEST VERSION ONLY ***NOT*** FIPS 140-2 VALIDATED.\\0"
-#endif
 	    // Required:	    
 	    VALUE "CompanyName", "The OpenSSL Project, http://www.openssl.org/\\0"
-#if defined(FIPS)
-	    VALUE "FileDescription", "TEST UNVALIDATED FIPS140-2 DLL\\0"
-#else
 	    VALUE "FileDescription", "OpenSSL Shared Library\\0"
-#endif
 	    VALUE "FileVersion", "$version\\0"
 #if defined(CRYPTO)
 	    VALUE "InternalName", "libeay32\\0"
@@ -1882,15 +1978,12 @@ BEGIN
 #elif defined(SSL)
 	    VALUE "InternalName", "ssleay32\\0"
 	    VALUE "OriginalFilename", "ssleay32.dll\\0"
-#elif defined(FIPS)
-	    VALUE "InternalName", "libosslfips\\0"
-	    VALUE "OriginalFilename", "libosslfips.dll\\0"
 #endif
 	    VALUE "ProductName", "The OpenSSL Toolkit\\0"
 	    VALUE "ProductVersion", "$version\\0"
 	    // Optional:
 	    //VALUE "Comments", "\\0"
-	    VALUE "LegalCopyright", "Copyright © 1998-2007 The OpenSSL Project. Copyright © 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved.\\0"
+	    VALUE "LegalCopyright", "Copyright © 1998-2005 The OpenSSL Project. Copyright © 1995-1998 Eric A. Young, Tim J. Hudson. All rights reserved.\\0"
 	    //VALUE "LegalTrademarks", "\\0"
 	    //VALUE "PrivateBuild", "\\0"
 	    //VALUE "SpecialBuild", "\\0"
@@ -1927,21 +2020,6 @@ libraries on this platform, they will at least look at it and try their best
 (but please first make sure you have tried with a current version of OpenSSL).
 EOF
 
-print <<\EOF if ($fipscanisterinternal eq "y");
-
-WARNING: OpenSSL has been configured using unsupported option(s) to internally
-generate a fipscanister.o object module for TESTING PURPOSES ONLY; that
-compiled module is NOT FIPS 140-2 validated and CANNOT be used to replace the
-OpenSSL FIPS Object Module as identified by the CMVP
-(http://csrc.nist.gov/cryptval/) in any application requiring the use of FIPS
-140-2 validated software. 
-
-This is an OpenSSL 0.9.8 test version.
-
-See the file README.FIPS for details of how to build a test library.
-
-EOF
-
 exit(0);
 
 sub usage
@@ -2017,8 +2095,9 @@ sub print_table_entry
 	(my $cc,my $cflags,my $unistd,my $thread_cflag,my $sys_id,my $lflags,
 	my $bn_ops,my $cpuid_obj,my $bn_obj,my $des_obj,my $aes_obj, my $bf_obj,
 	my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
-	my $rc5_obj,my $dso_scheme,my $shared_target,my $shared_cflag,
-	my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags)=
+	my $rc5_obj,my $wp_obj,my $cmll_obj,my $modes_obj, my $engines_obj,
+	my $perlasm_scheme,my $dso_scheme,my $shared_target,my $shared_cflag,
+	my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags,my $multilib)=
 	split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 			
 	print <<EOF
@@ -2042,6 +2121,11 @@ sub print_table_entry
 \$rc4_obj      = $rc4_obj
 \$rmd160_obj   = $rmd160_obj
 \$rc5_obj      = $rc5_obj
+\$wp_obj       = $wp_obj
+\$cmll_obj     = $cmll_obj
+\$modes_obj    = $modes_obj
+\$engines_obj  = $engines_obj
+\$perlasm_scheme = $perlasm_scheme
 \$dso_scheme   = $dso_scheme
 \$shared_target= $shared_target
 \$shared_cflag = $shared_cflag
@@ -2049,6 +2133,7 @@ sub print_table_entry
 \$shared_extension = $shared_extension
 \$ranlib       = $ranlib
 \$arflags      = $arflags
+\$multilib     = $multilib
 EOF
 	}
 
@@ -2065,33 +2150,25 @@ sub test_sanity
 		{
 		@fields = split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
 
-		if ($fields[$idx_dso_scheme-1] =~ /^(dl|dlfcn|win32|vms)$/)
+		if ($fields[$idx_dso_scheme-1] =~ /^(beos|dl|dlfcn|win32|vms)$/)
 			{
 			$errorcnt++;
 			print STDERR "SANITY ERROR: '$target' has the dso_scheme [$idx_dso_scheme] values\n";
 			print STDERR "              in the previous field\n";
 			}
-		elsif ($fields[$idx_dso_scheme+1] =~ /^(dl|dlfcn|win32|vms)$/)
+		elsif ($fields[$idx_dso_scheme+1] =~ /^(beos|dl|dlfcn|win32|vms)$/)
 			{
 			$errorcnt++;
 			print STDERR "SANITY ERROR: '$target' has the dso_scheme [$idx_dso_scheme] values\n";
 			print STDERR "              in the following field\n";
 			}
-		elsif ($fields[$idx_dso_scheme] !~ /^(dl|dlfcn|win32|vms|)$/)
+		elsif ($fields[$idx_dso_scheme] !~ /^(beos|dl|dlfcn|win32|vms|)$/)
 			{
 			$errorcnt++;
 			print STDERR "SANITY ERROR: '$target' has the dso_scheme [$idx_dso_scheme] field = ",$fields[$idx_dso_scheme],"\n";
-			print STDERR "              valid values are 'dl', 'dlfcn', 'win32' and 'vms'\n";
+			print STDERR "              valid values are 'beos', 'dl', 'dlfcn', 'win32' and 'vms'\n";
 			}
 		}
 	print STDERR "No sanity errors detected!\n" if $errorcnt == 0;
 	return $errorcnt;
 	}
-
-# Attempt to detect MSYS environment
-
-sub is_msys
-	{
-	return 1 if (exists $ENV{"TERM"} && $ENV{"TERM"} eq "msys");
-	return 0;
-	}
diff --git a/FREEBSD-Xlist b/FREEBSD-Xlist
index af5ab8109104..5157919b1516 100644
--- a/FREEBSD-Xlist
+++ b/FREEBSD-Xlist
@@ -1,3 +1,11 @@
+openssl-*/*.com
+openssl-*/*.doxy
+openssl-*/*.mak
+openssl-*/*.spec
+openssl-*/*/*.bat
+openssl-*/*/*.com
+openssl-*/*/*/*.bat
+openssl-*/*/*/*.com
 openssl-*/INSTALL.DJGPP
 openssl-*/INSTALL.MacOS
 openssl-*/INSTALL.NW
@@ -7,24 +15,47 @@ openssl-*/INSTALL.W32
 openssl-*/INSTALL.W64
 openssl-*/INSTALL.WCE
 openssl-*/MacOS
-openssl-*/VMS
 openssl-*/Netware
-openssl-*/*.com
-openssl-*/*.bak
-openssl-*/*.def
-openssl-*/*.mak
-openssl-*/*/*.bat
-openssl-*/*/*.com
-openssl-*/*/*/*.bat
-openssl-*/*/*/*.com
+openssl-*/VMS
+openssl-*/apps/demoCA
+openssl-*/apps/demoSRP
+openssl-*/apps/md4.c
 openssl-*/apps/openssl-vms.cnf
+openssl-*/apps/vms_decc_init.c
+openssl-*/apps/winrand.c
+openssl-*/bugs
+openssl-*/certs/demo
+openssl-*/crypto/*/*.cpp
+openssl-*/crypto/*/*/*.cpp
+openssl-*/crypto/*/asm/*-alpha.pl
+openssl-*/crypto/*/asm/alpha-*.pl
+openssl-*/crypto/LPdir_nyi.c
+openssl-*/crypto/LPdir_vms.c
+openssl-*/crypto/LPdir_win.c
+openssl-*/crypto/LPdir_win32.c
+openssl-*/crypto/LPdir_wince.c
+openssl-*/crypto/alphacpuid.pl
 openssl-*/crypto/bn/asm/vms.mar
 openssl-*/crypto/bn/vms-helper.c
 openssl-*/crypto/buildinf.h
+openssl-*/crypto/des/t
+openssl-*/crypto/des/times
 openssl-*/crypto/dso/dso_vms.c
+openssl-*/crypto/dso/dso_win.c
 openssl-*/crypto/dso/dso_win32.c
+openssl-*/crypto/dso/dso_wince.c
+openssl-*/crypto/err/openssl.ec
+openssl-*/crypto/openssl/demos
+openssl-*/crypto/rand/rand_nw.c
+openssl-*/crypto/rand/rand_os2.c
+openssl-*/crypto/rand/rand_vms.c
+openssl-*/crypto/rand/rand_win.c
 openssl-*/crypto/threads/solaris.sh
-openssl-*/demos/engines/rsaref
+openssl-*/demos
+openssl-*/engines/*.ec
+openssl-*/engines/*.opt
+openssl-*/engines/ccgost/e_gost_err.proto
+openssl-*/include
 openssl-*/ms
 openssl-*/op
 openssl-*/os2
@@ -32,14 +63,15 @@ openssl-*/perl
 openssl-*/shlib/Makefile.hpux10-cc
 openssl-*/shlib/hpux10-cc.sh
 openssl-*/shlib/irix.sh
+openssl-*/shlib/sco5-shared-gcc.sh
+openssl-*/shlib/sco5-shared-installed
+openssl-*/shlib/sco5-shared.sh
 openssl-*/shlib/solaris-sc4.sh
 openssl-*/shlib/solaris.sh
 openssl-*/shlib/sun.sh
-openssl-*/shlib/sco5-shared-installed
-openssl-*/shlib/sco5-shared-gcc.sh
-openssl-*/shlib/sco5-shared.sh
 openssl-*/shlib/svr5-shared-gcc.sh
 openssl-*/shlib/svr5-shared-installed
 openssl-*/shlib/svr5-shared.sh
-openssl-*/util/cygwin.sh
-openssl-*/include
+openssl-*/test
+openssl-*/times
+openssl-*/tools
diff --git a/FREEBSD-upgrade b/FREEBSD-upgrade
index bce7ac58c65e..38ba519cfa7a 100644
--- a/FREEBSD-upgrade
+++ b/FREEBSD-upgrade
@@ -11,8 +11,8 @@ First, read http://wiki.freebsd.org/SubversionPrimer/VendorImports
 # Xlist
 setenv XLIST /FreeBSD/work/openssl/svn-FREEBSD-files/FREEBSD-Xlist
 setenv FSVN "svn+ssh://svn.freebsd.org/base"
-setenv OSSLVER 0.9.8x
-# OSSLTAG format: v0_9_8x
+setenv OSSLVER 1.0.1c
+# OSSLTAG format: v1_0_1c
 
 ###setenv OSSLTAG v`echo ${OSSLVER} | tr . _`
 
@@ -38,6 +38,7 @@ comm -13 old new
 tar -cf - -C openssl-${OSSLVER} . | tar xf - -C dist
 cd dist
 comm -23 ../old ../new | xargs svn rm
+# Make sure to remove empty directories
 comm -13 ../old ../new | xargs svn --parents add
 
 svn stat
diff --git a/INSTALL b/INSTALL
index c72cc1dcee42..1325079f2a99 100644
--- a/INSTALL
+++ b/INSTALL
@@ -98,11 +98,17 @@
                 The crypto/<cipher> directory can be removed after running
                 "make depend".
 
-  -Dxxx, -lxxx, -Lxxx, -fxxx, -mxxx, -Kxxx These system specific options will
+  -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx These system specific options will
                 be passed through to the compiler to allow you to
                 define preprocessor symbols, specify additional libraries,
                 library directories or other compiler options.
 
+  -DHAVE_CRYPTODEV Enable the BSD cryptodev engine even if we are not using
+		BSD. Useful if you are running ocf-linux or something
+		similar. Once enabled you can also enable the use of
+		cryptodev digests, which is usually slower unless you have
+		large amounts data. Use -DUSE_CRYPTODEV_DIGESTS to force
+		it.
 
  Installation in Detail
  ----------------------
@@ -206,6 +212,10 @@
                        compile programs with libcrypto or libssl.
        lib             Contains the OpenSSL library files themselves.
 
+     Use "make install_sw" to install the software without documentation,
+     and "install_docs_html" to install HTML renditions of the manual
+     pages.
+
      Package builders who want to configure the library for standard
      locations, but have the package installed somewhere else so that
      it can easily be packaged, can use
diff --git a/Makefile b/Makefile
index 7fcc154ef816..d5db11b41770 100644
--- a/Makefile
+++ b/Makefile
@@ -4,16 +4,16 @@
 ## Makefile for OpenSSL
 ##
 
-VERSION=0.9.8x
-MAJOR=0
-MINOR=9.8
-SHLIB_VERSION_NUMBER=0.9.8
+VERSION=1.0.1c
+MAJOR=1
+MINOR=0.1
+SHLIB_VERSION_NUMBER=1.0.0
 SHLIB_VERSION_HISTORY=
-SHLIB_MAJOR=0
-SHLIB_MINOR=9.8
+SHLIB_MAJOR=1
+SHLIB_MINOR=0.0
 SHLIB_EXT=
 PLATFORM=dist
-OPTIONS= no-camellia no-capieng no-cms no-gmp no-jpake no-krb5 no-mdc2 no-montasm no-rc5 no-rfc3779 no-seed no-shared no-zlib no-zlib-dynamic
+OPTIONS= no-ec_nistp_64_gcc_128 no-gmp no-jpake no-krb5 no-md2 no-rc5 no-rfc3779 no-sctp no-shared no-store no-zlib no-zlib-dynamic static-engine
 CONFIGURE_ARGS=dist
 SHLIB_TARGET=
 
@@ -61,14 +61,14 @@ OPENSSLDIR=/usr/local/ssl
 
 CC= cc
 CFLAG= -O
-DEPFLAG= -DOPENSSL_NO_CAMELLIA -DOPENSSL_NO_CAPIENG -DOPENSSL_NO_CMS -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MDC2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SEED
+DEPFLAG= -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SCTP -DOPENSSL_NO_STORE
 PEX_LIBS= 
 EX_LIBS= 
 EXE_EXT= 
 ARFLAGS= 
 AR= ar $(ARFLAGS) r
-ARD=ar $(ARFLAGS) d
 RANLIB= /usr/bin/ranlib
+NM= nm
 PERL= /usr/bin/perl
 TAR= tar
 TARFLAGS= --no-recursion
@@ -88,10 +88,10 @@ ASFLAG=$(CFLAG)
 PROCESSOR= 
 
 # CPUID module collects small commonly used assembler snippets
-CPUID_OBJ= 
+CPUID_OBJ= mem_clr.o
 BN_ASM= bn_asm.o
 DES_ENC= des_enc.o fcrypt_b.o
-AES_ASM_OBJ= aes_core.o aes_cbc.o
+AES_ENC= aes_core.o aes_cbc.o
 BF_ENC= bf_enc.o
 CAST_ENC= c_enc.o
 RC4_ENC= rc4_enc.o rc4_skey.o
@@ -99,6 +99,11 @@ RC5_ENC= rc5_enc.o
 MD5_ASM_OBJ= 
 SHA1_ASM_OBJ= 
 RMD160_ASM_OBJ= 
+WP_ASM_OBJ= wp_block.o
+CMLL_ENC= camellia.o cmll_misc.o cmll_cbc.o
+MODES_ASM_OBJ= 
+ENGINES_ASM_OBJ= 
+PERLASM_SCHEME= 
 
 # KRB5 stuff
 KRB5_INCLUDES=
@@ -108,19 +113,17 @@ LIBKRB5=
 ZLIB_INCLUDE=
 LIBZLIB=
 
+# TOP level FIPS install directory.
+FIPSDIR=/usr/local/ssl/fips-2.0
+
 # This is the location of fipscanister.o and friends.
 # The FIPS module build will place it $(INSTALLTOP)/lib
 # but since $(INSTALLTOP) can only take the default value
 # when the module is built it will be in /usr/local/ssl/lib
-# $(INSTALLTOP) for this build make be different so hard
+# $(INSTALLTOP) for this build may be different so hard
 # code the path.
 
-FIPSLIBDIR=/usr/local/ssl/fips-1.0/lib/
-
-# This is set to "y" if fipscanister.o is compiled internally as
-# opposed to coming from an external validated location.
-
-FIPSCANISTERINTERNAL=n
+FIPSLIBDIR=
 
 # The location of the library which contains fipscanister.o
 # normally it will be libcrypto unless fipsdso is set in which
@@ -135,17 +138,18 @@ FIPSCANLIB=
 BASEADDR=0xFB00000
 
 DIRS=   crypto ssl engines apps test tools
+ENGDIRS= ccgost
 SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
 SDIRS=  \
 	objects \
-	md2 md4 md5 sha hmac ripemd \
-	des aes rc2 rc4 idea bf cast \
+	md4 md5 sha mdc2 hmac ripemd whrlpool \
+	des aes rc2 rc4 idea bf cast camellia seed modes \
 	bn ec rsa dsa ecdsa dh ecdh dso engine \
 	buffer bio stack lhash rand err \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-	store pqueue
+	cms pqueue ts srp cmac
 # keep in mind that the above list is adjusted by ./Configure
 # according to no-xxx arguments...
 
@@ -159,6 +163,8 @@ MANDIR=$(OPENSSLDIR)/man
 MAN1=1
 MAN3=3
 MANSUFFIX=
+HTMLSUFFIX=html
+HTMLDIR=$(OPENSSLDIR)/html
 SHELL=/bin/sh
 
 TOP=    .
@@ -168,7 +174,6 @@ WDIRS=  windows
 LIBS=   libcrypto.a libssl.a
 SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
 SHARED_SSL=libssl$(SHLIB_EXT)
-SHARED_FIPS=
 SHARED_LIBS=
 SHARED_LIBS_LINK_EXTS=
 SHARED_LDFLAGS=
@@ -195,38 +200,44 @@ CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
 		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
 		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
 		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
-		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS}		\
+		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS}	\
 		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
 		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
 
-BUILDENV=	PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
-		CC='${CC}' CFLAG='${CFLAG}' 			\
-		AS='${CC}' ASFLAG='${CFLAG} -c'			\
-		AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}'	\
-		SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/$(LIBDIR)'	\
-		INSTALL_PREFIX='${INSTALL_PREFIX}'		\
-		INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}'	\
-		LIBDIR='${LIBDIR}' \
-		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD ${MAKEDEPPROG}' \
-		DEPFLAG='-DOPENSSL_NO_DEPRECATED ${DEPFLAG}'	\
-		MAKEDEPPROG='${MAKEDEPPROG}'			\
-		SHARED_LDFLAGS='${SHARED_LDFLAGS}'		\
-		KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}'	\
-		EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}'	\
-		SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}'	\
-		PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}'	\
-		CPUID_OBJ='${CPUID_OBJ}'			\
-		BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' 	\
-		AES_ASM_OBJ='${AES_ASM_OBJ}'			\
-		BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}'	\
-		RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}'	\
-		SHA1_ASM_OBJ='${SHA1_ASM_OBJ}'			\
-		MD5_ASM_OBJ='${MD5_ASM_OBJ}'			\
-		RMD160_ASM_OBJ='${RMD160_ASM_OBJ}'		\
+BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
+		CC='$(CC)' CFLAG='$(CFLAG)' 			\
+		AS='$(CC)' ASFLAG='$(CFLAG) -c'			\
+		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
+		CROSS_COMPILE='$(CROSS_COMPILE)'	\
+		PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'		\
+		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
+		INSTALL_PREFIX='$(INSTALL_PREFIX)'		\
+		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
+		LIBDIR='$(LIBDIR)'				\
+		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
+		DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'	\
+		MAKEDEPPROG='$(MAKEDEPPROG)'			\
+		SHARED_LDFLAGS='$(SHARED_LDFLAGS)'		\
+		KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'	\
+		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
+		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
+		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
+		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
+		CPUID_OBJ='$(CPUID_OBJ)'			\
+		BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' 	\
+		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
+		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
+		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
+		SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'			\
+		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
+		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
+		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
+		MODES_ASM_OBJ='$(MODES_ASM_OBJ)'		\
+		ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)'		\
+		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
 		FIPSLIBDIR='${FIPSLIBDIR}'			\
+		FIPSDIR='${FIPSDIR}'				\
 		FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"	\
-		FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}'	\
-		FIPS_EX_OBJ='${FIPS_EX_OBJ}'	\
 		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
 # MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
 # which in turn eliminates ambiguities in variable treatment with -e.
@@ -245,127 +256,55 @@ BUILDENV=	PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
 # subdirectories defined in $(DIRS).  It requires that the target
 # is given through the shell variable `target'.
 BUILD_CMD=  if [ -d "$$dir" ]; then \
-	    (	[ $$target != all -a -z "$(FIPSCANLIB)" ] && FIPSCANLIB=/dev/null; \
-		cd $$dir && echo "making $$target in $$dir..." && \
+	    (	cd $$dir && echo "making $$target in $$dir..." && \
 		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
 	    ) || exit 1; \
 	    fi
 RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
 BUILD_ONE_CMD=\
-	if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
+	if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
 		$(BUILD_CMD); \
 	fi
 
 reflect:
 	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
 
-FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
-	../crypto/aes/aes_ecb.o \
-	../crypto/aes/aes_ofb.o \
-	../crypto/bn/bn_add.o \
-	../crypto/bn/bn_blind.o \
-	../crypto/bn/bn_ctx.o \
-	../crypto/bn/bn_div.o \
-	../crypto/bn/bn_exp2.o \
-	../crypto/bn/bn_exp.o \
-	../crypto/bn/bn_gcd.o \
-	../crypto/bn/bn_lib.o \
-	../crypto/bn/bn_mod.o \
-	../crypto/bn/bn_mont.o \
-	../crypto/bn/bn_mul.o \
-	../crypto/bn/bn_prime.o \
-	../crypto/bn/bn_rand.o \
-	../crypto/bn/bn_recp.o \
-	../crypto/bn/bn_shift.o \
-	../crypto/bn/bn_sqr.o \
-	../crypto/bn/bn_word.o \
-	../crypto/bn/bn_x931p.o \
-	../crypto/buffer/buf_str.o \
-	../crypto/cryptlib.o \
-	../crypto/des/cfb64ede.o \
-	../crypto/des/cfb64enc.o \
-	../crypto/des/cfb_enc.o \
-	../crypto/des/ecb3_enc.o \
-	../crypto/des/ecb_enc.o \
-	../crypto/des/ofb64ede.o \
-	../crypto/des/ofb64enc.o \
-	../crypto/des/fcrypt.o \
-	../crypto/des/set_key.o \
-	../crypto/dsa/dsa_utl.o \
-	../crypto/dsa/dsa_sign.o \
-	../crypto/dsa/dsa_vrf.o \
-	../crypto/err/err.o \
-	../crypto/evp/digest.o \
-	../crypto/evp/enc_min.o \
-	../crypto/evp/e_aes.o \
-	../crypto/evp/e_des3.o \
-	../crypto/evp/p_sign.o \
-	../crypto/evp/p_verify.o \
-	../crypto/mem_clr.o \
-	../crypto/mem.o \
-	../crypto/rand/md_rand.o \
-	../crypto/rand/rand_egd.o \
-	../crypto/rand/randfile.o \
-	../crypto/rand/rand_lib.o \
-	../crypto/rand/rand_os2.o \
-	../crypto/rand/rand_unix.o \
-	../crypto/rand/rand_win.o \
-	../crypto/rsa/rsa_lib.o \
-	../crypto/rsa/rsa_none.o \
-	../crypto/rsa/rsa_oaep.o \
-	../crypto/rsa/rsa_pk1.o \
-	../crypto/rsa/rsa_pss.o \
-	../crypto/rsa/rsa_ssl.o \
-	../crypto/rsa/rsa_x931.o \
-	../crypto/sha/sha1dgst.o \
-	../crypto/sha/sha256.o \
-	../crypto/sha/sha512.o \
-	../crypto/uid.o
-
 sub_all: build_all
 build_all: build_libs build_apps build_tests build_tools
 
-build_libs: build_crypto build_fips build_ssl build_shared build_engines
+build_libs: build_crypto build_ssl build_engines
 
 build_crypto:
-	if [ -n "$(FIPSCANLIB)" ]; then \
-		EXCL_OBJ='$(AES_ASM_OBJ) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
-		ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
-	else \
-		ARX='${AR}' ; \
-	fi ; export ARX ; \
-		dir=crypto; target=all; $(BUILD_ONE_CMD)
-build_fips:
-	@dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
-build_ssl: build_crypto
+	@dir=crypto; target=all; $(BUILD_ONE_CMD)
+build_ssl:
 	@dir=ssl; target=all; $(BUILD_ONE_CMD)
-build_engines: build_crypto
+build_engines:
 	@dir=engines; target=all; $(BUILD_ONE_CMD)
-build_apps: build_libs
+build_apps:
 	@dir=apps; target=all; $(BUILD_ONE_CMD)
-build_tests: build_libs
+build_tests:
 	@dir=test; target=all; $(BUILD_ONE_CMD)
-build_tools: build_libs
+build_tools:
 	@dir=tools; target=all; $(BUILD_ONE_CMD)
 
 all_testapps: build_libs build_testapps
 build_testapps:
 	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
 
-build_shared:	$(SHARED_LIBS)
-libcrypto$(SHLIB_EXT): libcrypto.a $(SHARED_FIPS)
+fips_premain_dso$(EXE_EXT): libcrypto.a
+	[ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
+		-DFINGERPRINT_PREMAIN_DSO_LOAD -o $@  \
+		$(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
+		libcrypto.a $(EX_LIBS)
+
+libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		if [ "$(FIPSCANLIB)" = "libfips" ]; then \
-			$(ARD) libcrypto.a fipscanister.o ; \
-			$(MAKE) SHLIBDIRS='crypto' SHLIBDEPS='-lfips' build-shared; \
-			$(AR) libcrypto.a fips/fipscanister.o ; \
-		else \
-			if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
-				FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
-				export CC FIPSLD_CC; \
-			fi; \
-			$(MAKE) -e SHLIBDIRS='crypto' build-shared; \
-		fi \
+		if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
+			FIPSLD_LIBCRYPTO=libcrypto.a ; \
+			FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
+			export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
+		fi; \
+		$(MAKE) -e SHLIBDIRS=crypto build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 		exit 1; \
@@ -373,32 +312,12 @@ libcrypto$(SHLIB_EXT): libcrypto.a $(SHARED_FIPS)
 
 libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		shlibdeps=-lcrypto; \
-		[ "$(FIPSCANLIB)" = "libfips" ] && shlibdeps="$$shlibdeps -lfips"; \
-		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS="$$shlibdeps" build-shared; \
-	else \
-		echo "There's no support for shared libraries on this platform" >&2 ; \
-		exit 1; \
-	fi
-
-fips/fipscanister.o:	build_fips
-libfips$(SHLIB_EXT):		fips/fipscanister.o
-	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		FIPSLD_CC="$(CC)"; CC=fips/fipsld; export CC FIPSLD_CC; \
-		$(MAKE) -f Makefile.shared -e $(BUILDENV) \
-			CC=$${CC} LIBNAME=fips THIS=$@ \
-			LIBEXTRAS=fips/fipscanister.o \
-			LIBDEPS="$(EX_LIBS)" \
-			LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			link_o.$(SHLIB_TARGET) || { rm -f $@; exit 1; } \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 		exit 1; \
 	fi
 
-libfips.a:
-	dir=fips; target=all; $(BUILD_ONE_CMD)
-
 clean-shared:
 	@set -e; for i in $(SHLIBDIRS); do \
 		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
@@ -414,10 +333,10 @@ clean-shared:
 	done
 
 link-shared:
-	@ set -e; for i in ${SHLIBDIRS}; do \
+	@ set -e; for i in $(SHLIBDIRS); do \
 		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
 			symlink.$(SHLIB_TARGET); \
 		libs="$$libs -l$$i"; \
 	done
@@ -425,13 +344,13 @@ link-shared:
 build-shared: do_$(SHLIB_TARGET) link-shared
 
 do_$(SHLIB_TARGET):
-	@ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
+		if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
 			LIBDEPS="$$libs $(EX_LIBS)" \
 			link_a.$(SHLIB_TARGET); \
 		libs="-l$$i $$libs"; \
@@ -447,7 +366,8 @@ libcrypto.pc: Makefile
 	    echo 'Description: OpenSSL cryptography library'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
 
 libssl.pc: Makefile
@@ -460,7 +380,8 @@ libssl.pc: Makefile
 	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
 
 openssl.pc: Makefile
@@ -473,7 +394,8 @@ openssl.pc: Makefile
 	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
 
 Makefile: Makefile.org Configure config
@@ -482,7 +404,7 @@ Makefile: Makefile.org Configure config
 	@false
 
 libclean:
-	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
+	rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
 
 clean:	libclean
 	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
@@ -508,34 +430,32 @@ links:
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
 	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
-	@if [ -z "$(FIPSCANLIB)" ]; then \
-		set -e; target=links; dir=fips ; $(BUILD_CMD) ; \
-	fi
 
 gentests:
 	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
 
 dclean:
-	rm -f *.bak
+	rm -rf *.bak include/openssl certs/.0
 	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
 
 rehash: rehash.time
 rehash.time: certs apps
 	@if [ -z "$(CROSS_COMPILE)" ]; then \
 		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
+		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
 		OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
 		$(PERL) tools/c_rehash certs) && \
 		touch rehash.time; \
-	fi
+	else :; fi
 
 test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
-	util/opensslwrap.sh version -a
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
+	OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
 
 report:
 	@$(PERL) util/selftest.pl
@@ -551,9 +471,9 @@ tags:
 	find . -name '[^.]*.[ch]' | xargs etags -a
 
 errors:
+	$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
 	$(PERL) util/mkerr.pl -recurse -write
 	(cd engines; $(MAKE) PERL=$(PERL) errors)
-	$(PERL) util/ck_errf.pl */*.c */*/*.c
 
 stacks:
 	$(PERL) util/mkstack.pl -write
@@ -568,6 +488,8 @@ crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
 	$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
 crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
 	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
+crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
+	$(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
 
 apps/openssl-vms.cnf: apps/openssl.cnf
 	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
@@ -580,7 +502,7 @@ TABLE: Configure
 	(echo 'Output of `Configure TABLE'"':"; \
 	$(PERL) Configure TABLE) > TABLE
 
-update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
+update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
 
 # Build distribution tar-file. As the list of files returned by "find" is
 # pretty long, on several platforms a "too many arguments" error or similar
@@ -611,8 +533,8 @@ tar-snap:
 dist:   
 	$(PERL) Configure dist
 	@$(MAKE) dist_pem_h
-	@$(MAKE) SDIRS='${SDIRS}' clean
-	@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
+	@$(MAKE) SDIRS='$(SDIRS)' clean
+	@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
 
 dist_pem_h:
 	(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
@@ -634,7 +556,7 @@ install_sw:
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 	done;
 	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
-	@set -e; for i in $(LIBS) ;\
+	@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
@@ -663,6 +585,16 @@ install_sw:
 					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 				fi ); \
+				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+				(	case $$i in \
+						*crypto*) i=libeay32.dll;; \
+						*ssl*)    i=ssleay32.dll;; \
+					esac; \
+					echo installing $$i; \
+	 				cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+				fi; \
 			fi; \
 		done; \
 		(	here="`pwd`"; \
@@ -682,6 +614,27 @@ install_sw:
 	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
 
+install_html_docs:
+	here="`pwd`"; \
+	for subdir in apps crypto ssl; do \
+		mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+		for i in doc/$$subdir/*.pod; do \
+			fn=`basename $$i .pod`; \
+			echo "installing html/$$fn.$(HTMLSUFFIX)"; \
+			cat $$i \
+			| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
+			| pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
+			| sed -r 's/<!DOCTYPE.*//g' \
+			> $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
+			$(PERL) util/extract-names.pl < $$i | \
+				grep -v $$filecase "^$$fn\$$" | \
+				(cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+				 while read n; do \
+					PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
+				 done); \
+		done; \
+	done
+
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
 		$(INSTALL_PREFIX)$(MANDIR)/man1 \
@@ -708,7 +661,7 @@ install_docs:
 			(grep -v "[	]"; true) | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 			 done); \
 	done; \
 	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
@@ -725,7 +678,7 @@ install_docs:
 			(grep -v "[	]"; true) | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 			 done); \
 	done
 
diff --git a/Makefile.org b/Makefile.org
index e87d62368abc..55273ea364a3 100644
--- a/Makefile.org
+++ b/Makefile.org
@@ -65,8 +65,8 @@ EX_LIBS=
 EXE_EXT= 
 ARFLAGS=
 AR=ar $(ARFLAGS) r
-ARD=ar $(ARFLAGS) d
 RANLIB= ranlib
+NM= nm
 PERL= perl
 TAR= tar
 TARFLAGS= --no-recursion
@@ -89,7 +89,7 @@ PROCESSOR=
 CPUID_OBJ= 
 BN_ASM= bn_asm.o
 DES_ENC= des_enc.o fcrypt_b.o
-AES_ASM_OBJ=aes_core.o aes_cbc.o
+AES_ENC= aes_core.o aes_cbc.o
 BF_ENC= bf_enc.o
 CAST_ENC= c_enc.o
 RC4_ENC= rc4_enc.o
@@ -97,6 +97,11 @@ RC5_ENC= rc5_enc.o
 MD5_ASM_OBJ= 
 SHA1_ASM_OBJ= 
 RMD160_ASM_OBJ= 
+WP_ASM_OBJ=
+CMLL_ENC=
+MODES_ASM_OBJ=
+ENGINES_ASM_OBJ=
+PERLASM_SCHEME=
 
 # KRB5 stuff
 KRB5_INCLUDES=
@@ -106,19 +111,17 @@ LIBKRB5=
 ZLIB_INCLUDE=
 LIBZLIB=
 
+# TOP level FIPS install directory.
+FIPSDIR=
+
 # This is the location of fipscanister.o and friends.
 # The FIPS module build will place it $(INSTALLTOP)/lib
 # but since $(INSTALLTOP) can only take the default value
 # when the module is built it will be in /usr/local/ssl/lib
-# $(INSTALLTOP) for this build make be different so hard
+# $(INSTALLTOP) for this build may be different so hard
 # code the path.
 
-FIPSLIBDIR=/usr/local/ssl/$(LIBDIR)/
-
-# This is set to "y" if fipscanister.o is compiled internally as
-# opposed to coming from an external validated location.
-
-FIPSCANISTERINTERNAL=n
+FIPSLIBDIR=
 
 # The location of the library which contains fipscanister.o
 # normally it will be libcrypto unless fipsdso is set in which
@@ -132,18 +135,19 @@ FIPSCANLIB=
 
 BASEADDR=
 
-DIRS=   crypto fips ssl engines apps test tools
-SHLIBDIRS= crypto ssl fips
+DIRS=   crypto ssl engines apps test tools
+ENGDIRS= ccgost
+SHLIBDIRS= crypto ssl
 
 # dirs in crypto to build
 SDIRS=  \
 	objects \
-	md2 md4 md5 sha mdc2 hmac ripemd \
-	des aes rc2 rc4 rc5 idea bf cast camellia seed \
+	md2 md4 md5 sha mdc2 hmac ripemd whrlpool \
+	des aes rc2 rc4 rc5 idea bf cast camellia seed modes \
 	bn ec rsa dsa ecdsa dh ecdh dso engine \
 	buffer bio stack lhash rand err \
 	evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
-	store cms pqueue jpake
+	cms pqueue ts jpake srp store cmac
 # keep in mind that the above list is adjusted by ./Configure
 # according to no-xxx arguments...
 
@@ -157,6 +161,8 @@ MANDIR=$(OPENSSLDIR)/man
 MAN1=1
 MAN3=3
 MANSUFFIX=
+HTMLSUFFIX=html
+HTMLDIR=$(OPENSSLDIR)/html
 SHELL=/bin/sh
 
 TOP=    .
@@ -166,7 +172,6 @@ WDIRS=  windows
 LIBS=   libcrypto.a libssl.a
 SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
 SHARED_SSL=libssl$(SHLIB_EXT)
-SHARED_FIPS=
 SHARED_LIBS=
 SHARED_LIBS_LINK_EXTS=
 SHARED_LDFLAGS=
@@ -193,38 +198,44 @@ CLEARENV=	TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}	\
 		$${EXHEADER+EXHEADER} $${HEADER+HEADER}		\
 		$${GENERAL+GENERAL} $${CFLAGS+CFLAGS}		\
 		$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}		\
-		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS}		\
+		$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS}	\
 		$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}	\
 		$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
 
-BUILDENV=	PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
-		CC='${CC}' CFLAG='${CFLAG}' 			\
-		AS='${CC}' ASFLAG='${CFLAG} -c'			\
-		AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}'	\
-		SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/$(LIBDIR)'	\
-		INSTALL_PREFIX='${INSTALL_PREFIX}'		\
-		INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}'	\
-		LIBDIR='${LIBDIR}' \
-		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD ${MAKEDEPPROG}' \
-		DEPFLAG='-DOPENSSL_NO_DEPRECATED ${DEPFLAG}'	\
-		MAKEDEPPROG='${MAKEDEPPROG}'			\
-		SHARED_LDFLAGS='${SHARED_LDFLAGS}'		\
-		KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}'	\
-		EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}'	\
-		SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}'	\
-		PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}'	\
-		CPUID_OBJ='${CPUID_OBJ}'			\
-		BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' 	\
-		AES_ASM_OBJ='${AES_ASM_OBJ}'			\
-		BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}'	\
-		RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}'	\
-		SHA1_ASM_OBJ='${SHA1_ASM_OBJ}'			\
-		MD5_ASM_OBJ='${MD5_ASM_OBJ}'			\
-		RMD160_ASM_OBJ='${RMD160_ASM_OBJ}'		\
+BUILDENV=	PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
+		CC='$(CC)' CFLAG='$(CFLAG)' 			\
+		AS='$(CC)' ASFLAG='$(CFLAG) -c'			\
+		AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)'	\
+		CROSS_COMPILE='$(CROSS_COMPILE)'	\
+		PERL='$(PERL)' ENGDIRS='$(ENGDIRS)'		\
+		SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)'	\
+		INSTALL_PREFIX='$(INSTALL_PREFIX)'		\
+		INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)'	\
+		LIBDIR='$(LIBDIR)'				\
+		MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \
+		DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)'	\
+		MAKEDEPPROG='$(MAKEDEPPROG)'			\
+		SHARED_LDFLAGS='$(SHARED_LDFLAGS)'		\
+		KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)'	\
+		ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)'	\
+		EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)'	\
+		SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)'	\
+		PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)'	\
+		CPUID_OBJ='$(CPUID_OBJ)'			\
+		BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' 	\
+		AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)'	\
+		BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)'	\
+		RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)'	\
+		SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)'			\
+		MD5_ASM_OBJ='$(MD5_ASM_OBJ)'			\
+		RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)'		\
+		WP_ASM_OBJ='$(WP_ASM_OBJ)'			\
+		MODES_ASM_OBJ='$(MODES_ASM_OBJ)'		\
+		ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)'		\
+		PERLASM_SCHEME='$(PERLASM_SCHEME)'		\
 		FIPSLIBDIR='${FIPSLIBDIR}'			\
+		FIPSDIR='${FIPSDIR}'				\
 		FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"	\
-		FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}'	\
-		FIPS_EX_OBJ='${FIPS_EX_OBJ}'	\
 		THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
 # MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
 # which in turn eliminates ambiguities in variable treatment with -e.
@@ -243,127 +254,55 @@ BUILDENV=	PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
 # subdirectories defined in $(DIRS).  It requires that the target
 # is given through the shell variable `target'.
 BUILD_CMD=  if [ -d "$$dir" ]; then \
-	    (	[ $$target != all -a -z "$(FIPSCANLIB)" ] && FIPSCANLIB=/dev/null; \
-		cd $$dir && echo "making $$target in $$dir..." && \
+	    (	cd $$dir && echo "making $$target in $$dir..." && \
 		$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
 	    ) || exit 1; \
 	    fi
 RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
 BUILD_ONE_CMD=\
-	if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
+	if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \
 		$(BUILD_CMD); \
 	fi
 
 reflect:
 	@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
 
-FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
-	../crypto/aes/aes_ecb.o \
-	../crypto/aes/aes_ofb.o \
-	../crypto/bn/bn_add.o \
-	../crypto/bn/bn_blind.o \
-	../crypto/bn/bn_ctx.o \
-	../crypto/bn/bn_div.o \
-	../crypto/bn/bn_exp2.o \
-	../crypto/bn/bn_exp.o \
-	../crypto/bn/bn_gcd.o \
-	../crypto/bn/bn_lib.o \
-	../crypto/bn/bn_mod.o \
-	../crypto/bn/bn_mont.o \
-	../crypto/bn/bn_mul.o \
-	../crypto/bn/bn_prime.o \
-	../crypto/bn/bn_rand.o \
-	../crypto/bn/bn_recp.o \
-	../crypto/bn/bn_shift.o \
-	../crypto/bn/bn_sqr.o \
-	../crypto/bn/bn_word.o \
-	../crypto/bn/bn_x931p.o \
-	../crypto/buffer/buf_str.o \
-	../crypto/cryptlib.o \
-	../crypto/des/cfb64ede.o \
-	../crypto/des/cfb64enc.o \
-	../crypto/des/cfb_enc.o \
-	../crypto/des/ecb3_enc.o \
-	../crypto/des/ecb_enc.o \
-	../crypto/des/ofb64ede.o \
-	../crypto/des/ofb64enc.o \
-	../crypto/des/fcrypt.o \
-	../crypto/des/set_key.o \
-	../crypto/dsa/dsa_utl.o \
-	../crypto/dsa/dsa_sign.o \
-	../crypto/dsa/dsa_vrf.o \
-	../crypto/err/err.o \
-	../crypto/evp/digest.o \
-	../crypto/evp/enc_min.o \
-	../crypto/evp/e_aes.o \
-	../crypto/evp/e_des3.o \
-	../crypto/evp/p_sign.o \
-	../crypto/evp/p_verify.o \
-	../crypto/mem_clr.o \
-	../crypto/mem.o \
-	../crypto/rand/md_rand.o \
-	../crypto/rand/rand_egd.o \
-	../crypto/rand/randfile.o \
-	../crypto/rand/rand_lib.o \
-	../crypto/rand/rand_os2.o \
-	../crypto/rand/rand_unix.o \
-	../crypto/rand/rand_win.o \
-	../crypto/rsa/rsa_lib.o \
-	../crypto/rsa/rsa_none.o \
-	../crypto/rsa/rsa_oaep.o \
-	../crypto/rsa/rsa_pk1.o \
-	../crypto/rsa/rsa_pss.o \
-	../crypto/rsa/rsa_ssl.o \
-	../crypto/rsa/rsa_x931.o \
-	../crypto/sha/sha1dgst.o \
-	../crypto/sha/sha256.o \
-	../crypto/sha/sha512.o \
-	../crypto/uid.o
-
 sub_all: build_all
 build_all: build_libs build_apps build_tests build_tools
 
-build_libs: build_crypto build_fips build_ssl build_shared build_engines
+build_libs: build_crypto build_ssl build_engines
 
 build_crypto:
-	if [ -n "$(FIPSCANLIB)" ]; then \
-		EXCL_OBJ='$(AES_ASM_OBJ) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
-		ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
-	else \
-		ARX='${AR}' ; \
-	fi ; export ARX ; \
-		dir=crypto; target=all; $(BUILD_ONE_CMD)
-build_fips:
-	@dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
-build_ssl: build_crypto
+	@dir=crypto; target=all; $(BUILD_ONE_CMD)
+build_ssl:
 	@dir=ssl; target=all; $(BUILD_ONE_CMD)
-build_engines: build_crypto
+build_engines:
 	@dir=engines; target=all; $(BUILD_ONE_CMD)
-build_apps: build_libs
+build_apps:
 	@dir=apps; target=all; $(BUILD_ONE_CMD)
-build_tests: build_libs
+build_tests:
 	@dir=test; target=all; $(BUILD_ONE_CMD)
-build_tools: build_libs
+build_tools:
 	@dir=tools; target=all; $(BUILD_ONE_CMD)
 
 all_testapps: build_libs build_testapps
 build_testapps:
 	@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
 
-build_shared:	$(SHARED_LIBS)
-libcrypto$(SHLIB_EXT): libcrypto.a $(SHARED_FIPS)
+fips_premain_dso$(EXE_EXT): libcrypto.a
+	[ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \
+		-DFINGERPRINT_PREMAIN_DSO_LOAD -o $@  \
+		$(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \
+		libcrypto.a $(EX_LIBS)
+
+libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT)
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		if [ "$(FIPSCANLIB)" = "libfips" ]; then \
-			$(ARD) libcrypto.a fipscanister.o ; \
-			$(MAKE) SHLIBDIRS='crypto' SHLIBDEPS='-lfips' build-shared; \
-			$(AR) libcrypto.a fips/fipscanister.o ; \
-		else \
-			if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
-				FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
-				export CC FIPSLD_CC; \
-			fi; \
-			$(MAKE) -e SHLIBDIRS='crypto' build-shared; \
-		fi \
+		if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
+			FIPSLD_LIBCRYPTO=libcrypto.a ; \
+			FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \
+			export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \
+		fi; \
+		$(MAKE) -e SHLIBDIRS=crypto build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 		exit 1; \
@@ -371,32 +310,12 @@ libcrypto$(SHLIB_EXT): libcrypto.a $(SHARED_FIPS)
 
 libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
 	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		shlibdeps=-lcrypto; \
-		[ "$(FIPSCANLIB)" = "libfips" ] && shlibdeps="$$shlibdeps -lfips"; \
-		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS="$$shlibdeps" build-shared; \
-	else \
-		echo "There's no support for shared libraries on this platform" >&2 ; \
-		exit 1; \
-	fi
-
-fips/fipscanister.o:	build_fips
-libfips$(SHLIB_EXT):		fips/fipscanister.o
-	@if [ "$(SHLIB_TARGET)" != "" ]; then \
-		FIPSLD_CC="$(CC)"; CC=fips/fipsld; export CC FIPSLD_CC; \
-		$(MAKE) -f Makefile.shared -e $(BUILDENV) \
-			CC=$${CC} LIBNAME=fips THIS=$@ \
-			LIBEXTRAS=fips/fipscanister.o \
-			LIBDEPS="$(EX_LIBS)" \
-			LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			link_o.$(SHLIB_TARGET) || { rm -f $@; exit 1; } \
+		$(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \
 	else \
 		echo "There's no support for shared libraries on this platform" >&2; \
 		exit 1; \
 	fi
 
-libfips.a:
-	dir=fips; target=all; $(BUILD_ONE_CMD)
-
 clean-shared:
 	@set -e; for i in $(SHLIBDIRS); do \
 		if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
@@ -412,10 +331,10 @@ clean-shared:
 	done
 
 link-shared:
-	@ set -e; for i in ${SHLIBDIRS}; do \
+	@ set -e; for i in $(SHLIBDIRS); do \
 		$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
 			symlink.$(SHLIB_TARGET); \
 		libs="$$libs -l$$i"; \
 	done
@@ -423,13 +342,13 @@ link-shared:
 build-shared: do_$(SHLIB_TARGET) link-shared
 
 do_$(SHLIB_TARGET):
-	@ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
-		if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
+	@ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \
+		if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 			libs="$(LIBKRB5) $$libs"; \
 		fi; \
 		$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
-			LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
-			LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
+			LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \
+			LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \
 			LIBDEPS="$$libs $(EX_LIBS)" \
 			link_a.$(SHLIB_TARGET); \
 		libs="-l$$i $$libs"; \
@@ -445,7 +364,8 @@ libcrypto.pc: Makefile
 	    echo 'Description: OpenSSL cryptography library'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
 
 libssl.pc: Makefile
@@ -458,7 +378,8 @@ libssl.pc: Makefile
 	    echo 'Description: Secure Sockets Layer and cryptography libraries'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
 
 openssl.pc: Makefile
@@ -471,7 +392,8 @@ openssl.pc: Makefile
 	    echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 	    echo 'Version: '$(VERSION); \
 	    echo 'Requires: '; \
-	    echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
+	    echo 'Libs: -L$${libdir} -lssl -lcrypto'; \
+	    echo 'Libs.private: $(EX_LIBS)'; \
 	    echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
 
 Makefile: Makefile.org Configure config
@@ -480,7 +402,7 @@ Makefile: Makefile.org Configure config
 	@false
 
 libclean:
-	rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
+	rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib
 
 clean:	libclean
 	rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
@@ -506,34 +428,32 @@ links:
 	@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 	@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
 	@set -e; target=links; $(RECURSIVE_BUILD_CMD)
-	@if [ -z "$(FIPSCANLIB)" ]; then \
-		set -e; target=links; dir=fips ; $(BUILD_CMD) ; \
-	fi
 
 gentests:
 	@(cd test && echo "generating dummy tests (if needed)..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate );
 
 dclean:
-	rm -f *.bak
+	rm -rf *.bak include/openssl certs/.0
 	@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
 
 rehash: rehash.time
 rehash.time: certs apps
 	@if [ -z "$(CROSS_COMPILE)" ]; then \
 		(OPENSSL="`pwd`/util/opensslwrap.sh"; \
+		[ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \
 		OPENSSL_DEBUG_MEMORY=on; \
 		export OPENSSL OPENSSL_DEBUG_MEMORY; \
 		$(PERL) tools/c_rehash certs) && \
 		touch rehash.time; \
-	fi
+	else :; fi
 
 test:   tests
 
 tests: rehash
 	@(cd test && echo "testing..." && \
-	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
-	util/opensslwrap.sh version -a
+	$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests );
+	OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a
 
 report:
 	@$(PERL) util/selftest.pl
@@ -549,9 +469,9 @@ tags:
 	find . -name '[^.]*.[ch]' | xargs etags -a
 
 errors:
+	$(PERL) util/ck_errf.pl -strict */*.c */*/*.c
 	$(PERL) util/mkerr.pl -recurse -write
 	(cd engines; $(MAKE) PERL=$(PERL) errors)
-	$(PERL) util/ck_errf.pl */*.c */*/*.c
 
 stacks:
 	$(PERL) util/mkstack.pl -write
@@ -566,6 +486,8 @@ crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
 	$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
 crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
 	$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
+crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num
+	$(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h
 
 apps/openssl-vms.cnf: apps/openssl.cnf
 	$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
@@ -578,7 +500,7 @@ TABLE: Configure
 	(echo 'Output of `Configure TABLE'"':"; \
 	$(PERL) Configure TABLE) > TABLE
 
-update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
+update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
 
 # Build distribution tar-file. As the list of files returned by "find" is
 # pretty long, on several platforms a "too many arguments" error or similar
@@ -609,8 +531,8 @@ tar-snap:
 dist:   
 	$(PERL) Configure dist
 	@$(MAKE) dist_pem_h
-	@$(MAKE) SDIRS='${SDIRS}' clean
-	@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
+	@$(MAKE) SDIRS='$(SDIRS)' clean
+	@$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar
 
 dist_pem_h:
 	(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
@@ -632,7 +554,7 @@ install_sw:
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 	done;
 	@set -e; target=install; $(RECURSIVE_BUILD_CMD)
-	@set -e; for i in $(LIBS) ;\
+	@set -e; liblist="$(LIBS)"; for i in $$liblist ;\
 	do \
 		if [ -f "$$i" ]; then \
 		(       echo installing $$i; \
@@ -661,6 +583,16 @@ install_sw:
 					chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 					mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 				fi ); \
+				if expr $(PLATFORM) : 'mingw' > /dev/null; then \
+				(	case $$i in \
+						*crypto*) i=libeay32.dll;; \
+						*ssl*)    i=ssleay32.dll;; \
+					esac; \
+					echo installing $$i; \
+	 				cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \
+	 				mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \
+				fi; \
 			fi; \
 		done; \
 		(	here="`pwd`"; \
@@ -680,6 +612,27 @@ install_sw:
 	cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
 	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
 
+install_html_docs:
+	here="`pwd`"; \
+	for subdir in apps crypto ssl; do \
+		mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+		for i in doc/$$subdir/*.pod; do \
+			fn=`basename $$i .pod`; \
+			echo "installing html/$$fn.$(HTMLSUFFIX)"; \
+			cat $$i \
+			| sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \
+			| pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \
+			| sed -r 's/<!DOCTYPE.*//g' \
+			> $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \
+			$(PERL) util/extract-names.pl < $$i | \
+				grep -v $$filecase "^$$fn\$$" | \
+				(cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \
+				 while read n; do \
+					PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \
+				 done); \
+		done; \
+	done
+
 install_docs:
 	@$(PERL) $(TOP)/util/mkdir-p.pl \
 		$(INSTALL_PREFIX)$(MANDIR)/man1 \
@@ -706,7 +659,7 @@ install_docs:
 			(grep -v "[	]"; true) | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 			 done); \
 	done; \
 	set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
@@ -723,7 +676,7 @@ install_docs:
 			(grep -v "[	]"; true) | \
 			(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 			 while read n; do \
-				$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
+				PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 			 done); \
 	done
 
diff --git a/Makefile.shared b/Makefile.shared
index 3183436ac631..e753f44e18fd 100644
--- a/Makefile.shared
+++ b/Makefile.shared
@@ -14,6 +14,8 @@ CFLAGS=$(CFLAG)
 LDFLAGS=
 SHARED_LDFLAGS=
 
+NM=nm
+
 # LIBNAME contains just the name of the library, without prefix ("lib"
 # on Unix, "cyg" for certain forms under Cygwin...) or suffix (.a, .so,
 # .dll, ...).  This one MUST have a value when using this makefile to
@@ -91,7 +93,7 @@ LINK_APP=	\
   ( $(SET_X);   \
     LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
     LDCMD="$${LDCMD:-$(CC)}"; LDFLAGS="$${LDFLAGS:-$(CFLAGS)}"; \
-    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
+    LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
     LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
     LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
     $${LDCMD} $${LDFLAGS} -o $${APPNAME:=$(APPNAME)} $(OBJECTS) $${LIBDEPS} )
@@ -101,7 +103,7 @@ LINK_SO=	\
     LIBDEPS="$${LIBDEPS:-$(LIBDEPS)}"; \
     SHAREDCMD="$${SHAREDCMD:-$(CC)}"; \
     SHAREDFLAGS="$${SHAREDFLAGS:-$(CFLAGS) $(SHARED_LDFLAGS)}"; \
-    LIBPATH=`for x in $$LIBDEPS; do if echo $$x | grep '^ *-L' > /dev/null 2>&1; then echo $$x | sed -e 's/^ *-L//'; fi; done | uniq`; \
+    LIBPATH=`for x in $$LIBDEPS; do echo $$x; done | sed -e 's/^ *-L//;t' -e d | uniq`; \
     LIBPATH=`echo $$LIBPATH | sed -e 's/ /:/g'`; \
     LD_LIBRARY_PATH=$$LIBPATH:$$LD_LIBRARY_PATH \
     $${SHAREDCMD} $${SHAREDFLAGS} \
@@ -133,7 +135,7 @@ LINK_SO_A_VIA_O=	\
   ALL=$$ALLSYMSFLAGS; ALLSYMSFLAGS=; NOALLSYMSFLAGS=; \
   ( $(SET_X); \
     ld $(LDFLAGS) -r -o lib$(LIBNAME).o $$ALL lib$(LIBNAME).a $(LIBEXTRAS) ); \
-  $(LINK_SO) && rm -f $(LIBNAME).o
+  $(LINK_SO) && rm -f lib$(LIBNAME).o
 
 LINK_SO_A_UNPACKED=	\
   UNPACKDIR=link_tmp.$$$$; rm -rf $$UNPACKDIR; mkdir $$UNPACKDIR; \
@@ -142,7 +144,7 @@ LINK_SO_A_UNPACKED=	\
   SHOBJECTS=$$UNPACKDIR/*.o; \
   $(LINK_SO) && rm -rf $$UNPACKDIR
 
-DETECT_GNU_LD=(${CC} -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
+DETECT_GNU_LD=($(CC) -Wl,-V /dev/null 2>&1 | grep '^GNU ld' )>/dev/null
 
 DO_GNU_SO=$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
@@ -168,8 +170,19 @@ link_a.gnu:
 link_app.gnu:
 	@ $(DO_GNU_APP); $(LINK_APP)
 
+DO_BEOS_SO=	SHLIB=lib$(LIBNAME).so; \
+	SHLIB_SUFFIX=; \
+	ALLSYMSFLAGS='-Wl,--whole-archive'; \
+	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -Wl,-Bsymbolic -Wl,-soname=$$SHLIB$$SHLIB_SUFFIX"
+
+link_o.beos:
+	@ $(DO_BEOS_SO); $(LINK_SO_O)
+link_a.beos:
+	@ $(DO_BEOS_SO); $(LINK_SO_A)
+
 link_o.bsd:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
@@ -179,7 +192,7 @@ link_o.bsd:
 	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
 	fi; $(LINK_SO_O)
 link_a.bsd:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).so; \
 	SHLIB_SUFFIX=; \
@@ -189,24 +202,34 @@ link_a.bsd:
 	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared -nostdlib"; \
 	fi; $(LINK_SO_A)
 link_app.bsd:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_APP); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
 	LDFLAGS="$(CFLAGS) -Wl,-rpath,$(LIBPATH)"; \
 	fi; $(LINK_APP)
 
 # For Darwin AKA Mac OS/X (dyld)
-# link_o.darwin produces .so, because we let it use dso_dlfcn module,
-# which has .so extension hard-coded. One can argue that one should
-# develop special dso module for MacOS X. At least manual encourages
-# to use native NSModule(3) API and refers to dlfcn as termporary hack.
+# Originally link_o.darwin produced .so, because it was hard-coded
+# in dso_dlfcn module. At later point dso_dlfcn switched to .dylib
+# extension in order to allow for run-time linking with vendor-
+# supplied shared libraries such as libz, so that link_o.darwin had
+# to be harmonized with it. This caused minor controversy, because
+# it was believed that dlopen can't be used to dynamically load
+# .dylib-s, only so called bundle modules (ones linked with -bundle
+# flag). The belief seems to be originating from pre-10.4 release,
+# where dlfcn functionality was emulated by dlcompat add-on. In
+# 10.4 dlopen was rewritten as native part of dyld and is documented
+# to be capable of loading both dynamic libraries and bundles. In
+# order to provide compatibility with pre-10.4 dlopen, modules are
+# linked with -bundle flag, which makes .dylib extension misleading.
+# It works, because dlopen is [and always was] extension-agnostic.
+# Alternative to this heuristic approach is to develop specific
+# MacOS X dso module relying on whichever "native" dyld interface.
 link_o.darwin:
 	@ $(CALC_VERSIONS); \
-	SHLIB=`expr "$$THIS" : '.*/\([^/\.]*\)\.'`; \
-	SHLIB=$${SHLIB:-lib$(LIBNAME)}; \
-	SHLIB_SUFFIX=`expr "$$THIS" : '.*\(\.[^\.]*\)$$'`; \
-	SHLIB_SUFFIX=$${SHLIB_SUFFIX:-.so}; \
+	SHLIB=lib$(LIBNAME); \
+	SHLIB_SUFFIX=.dylib; \
 	ALLSYMSFLAGS='-all_load'; \
 	NOALLSYMSFLAGS=''; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS)"; \
+	SHAREDFLAGS="$(CFLAGS) `echo $(SHARED_LDFLAGS) | sed s/dynamiclib/bundle/`"; \
 	if [ -n "$(LIBVERSION)" ]; then \
 		SHAREDFLAGS="$$SHAREDFLAGS -current_version $(LIBVERSION)"; \
 	fi; \
@@ -227,7 +250,7 @@ link_a.darwin:
 	if [ -n "$$SHLIB_SOVER_NODOT" ]; then \
 		SHAREDFLAGS="$$SHAREDFLAGS -compatibility_version $$SHLIB_SOVER_NODOT"; \
 	fi; \
-	SHAREDFLAGS="$$SHAREDFLAGS -install_name ${INSTALLTOP}/lib/$$SHLIB${SHLIB_EXT}"; \
+	SHAREDFLAGS="$$SHAREDFLAGS -install_name $(INSTALLTOP)/$(LIBDIR)/$$SHLIB$(SHLIB_EXT)"; \
 	$(LINK_SO_A)
 link_app.darwin:	# is there run-path on darwin?
 	$(LINK_APP)
@@ -237,40 +260,59 @@ link_o.cygwin:
 	INHIBIT_SYMLINKS=yes; \
 	SHLIB=cyg$(LIBNAME); \
 	base=-Wl,--enable-auto-image-base; \
+	deffile=; \
 	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
 		SHLIB=$(LIBNAME)eay32; base=; \
+		if test -f $(LIBNAME)eay32.def; then \
+			deffile=$(LIBNAME)eay32.def; \
+		fi; \
 	fi; \
 	SHLIB_SUFFIX=.dll; \
 	LIBVERSION="$(LIBVERSION)"; \
 	SHLIB_SOVER=${LIBVERSION:+"-$(LIBVERSION)"}; \
 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base $$deffile -Wl,-s,-Bsymbolic"; \
 	$(LINK_SO_O)
+#for mingw target if def-file is in use dll-name should match library-name
 link_a.cygwin:
 	@ $(CALC_VERSIONS); \
 	INHIBIT_SYMLINKS=yes; \
-	SHLIB=cyg$(LIBNAME); \
+	SHLIB=cyg$(LIBNAME); SHLIB_SOVER=-$(LIBVERSION); SHLIB_SUFFIX=.dll; \
+	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; extras=; \
 	base=-Wl,--enable-auto-image-base; \
 	if expr $(PLATFORM) : 'mingw' > /dev/null; then \
-		SHLIB=$(LIBNAME)eay32; \
-		base=;  [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
+		case $(LIBNAME) in \
+			crypto) SHLIB=libeay;; \
+			ssl) SHLIB=ssleay;; \
+		esac; \
+		SHLIB_SOVER=32; \
+		extras="$(LIBNAME).def"; \
+		$(PERL) util/mkdef.pl 32 $$SHLIB > $$extras; \
+		base=; [ $(LIBNAME) = "crypto" ] && base=-Wl,--image-base,0x63000000; \
 	fi; \
-	SHLIB_SUFFIX=.dll; \
-	SHLIB_SOVER=-$(LIBVERSION); \
+	dll_name=$$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX; \
+	$(PERL) util/mkrc.pl $$dll_name | \
+		$(CROSS_COMPILE)windres -o rc.o; \
+	extras="$$extras rc.o"; \
 	ALLSYMSFLAGS='-Wl,--whole-archive'; \
 	NOALLSYMSFLAGS='-Wl,--no-whole-archive'; \
-	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a"; \
-	[ -f apps/$$SHLIB$$SHLIB_SUFFIX ] && rm apps/$$SHLIB$$SHLIB_SUFFIX; \
-	[ -f test/$$SHLIB$$SHLIB_SUFFIX ] && rm test/$$SHLIB$$SHLIB_SUFFIX; \
+	SHAREDFLAGS="$(CFLAGS) $(SHARED_LDFLAGS) -shared $$base -Wl,-s,-Bsymbolic -Wl,--out-implib,lib$(LIBNAME).dll.a $$extras"; \
+	[ -f apps/$$dll_name ] && rm apps/$$dll_name; \
+	[ -f test/$$dll_name ] && rm test/$$dll_name; \
 	$(LINK_SO_A) || exit 1; \
-	cp -p $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX apps/; \
-	cp -p $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX test/
+	rm $$extras; \
+	cp -p $$dll_name apps/; \
+	cp -p $$dll_name test/
 link_app.cygwin:
+	@if expr "$(CFLAGS)" : '.*OPENSSL_USE_APPLINK' > /dev/null; then \
+		LIBDEPS="$(TOP)/crypto/applink.o $${LIBDEPS:-$(LIBDEPS)}"; \
+		export LIBDEPS; \
+	fi; \
 	$(LINK_APP)
 
 link_o.alpha-osf1:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		SHLIB=lib$(LIBNAME).so; \
@@ -291,7 +333,7 @@ link_o.alpha-osf1:
 	fi; \
 	$(LINK_SO_O)
 link_a.alpha-osf1:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		SHLIB=lib$(LIBNAME).so; \
@@ -312,7 +354,7 @@ link_a.alpha-osf1:
 	fi; \
 	$(LINK_SO_A)
 link_app.alpha-osf1:
-	@if ${DETECT_GNU_LD}; then \
+	@if $(DETECT_GNU_LD); then \
 		$(DO_GNU_APP); \
 	else \
 		LDFLAGS="$(CFLAGS) -rpath $(LIBRPATH)"; \
@@ -320,7 +362,7 @@ link_app.alpha-osf1:
 	$(LINK_APP)
 
 link_o.solaris:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -334,12 +376,12 @@ link_o.solaris:
 	fi; \
 	$(LINK_SO_O)
 link_a.solaris:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
 		MINUSZ='-z '; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && MINUSZ='-Wl,-z,'; \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=;\
 		ALLSYMSFLAGS="$${MINUSZ}allextract"; \
@@ -348,7 +390,7 @@ link_a.solaris:
 	fi; \
 	$(LINK_SO_A)
 link_app.solaris:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_APP); \
 	else \
 		LDFLAGS="$(CFLAGS) -R $(LIBRPATH)"; \
@@ -357,7 +399,7 @@ link_app.solaris:
 
 # OpenServer 5 native compilers used
 link_o.svr3:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -369,7 +411,7 @@ link_o.svr3:
 	fi; \
 	$(LINK_SO_O)
 link_a.svr3:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -381,12 +423,12 @@ link_a.svr3:
 	fi; \
 	$(LINK_SO_A_UNPACKED)
 link_app.svr3:
-	@${DETECT_GNU_LD} && $(DO_GNU_APP); \
+	@$(DETECT_GNU_LD) && $(DO_GNU_APP); \
 	$(LINK_APP)
 
 # UnixWare 7 and OpenUNIX 8 native compilers used
 link_o.svr5:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -400,12 +442,12 @@ link_o.svr5:
 	fi; \
 	$(LINK_SO_O)
 link_a.svr5:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
 		SHARE_FLAG='-G'; \
-		(${CC} -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
+		($(CC) -v 2>&1 | grep gcc) > /dev/null && SHARE_FLAG='-shared'; \
 		SHLIB=lib$(LIBNAME).so; \
 		SHLIB_SUFFIX=; \
 		ALLSYMSFLAGS=''; \
@@ -414,11 +456,11 @@ link_a.svr5:
 	fi; \
 	$(LINK_SO_A_UNPACKED)
 link_app.svr5:
-	@${DETECT_GNU_LD} && $(DO_GNU_APP); \
+	@$(DETECT_GNU_LD) && $(DO_GNU_APP); \
 	$(LINK_APP)
 
 link_o.irix:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -432,7 +474,7 @@ link_o.irix:
 	fi; \
 	$(LINK_SO_O)
 link_a.irix:
-	@ if ${DETECT_GNU_LD}; then \
+	@ if $(DETECT_GNU_LD); then \
 		$(DO_GNU_SO); \
 	else \
 		$(CALC_VERSIONS); \
@@ -458,7 +500,7 @@ link_app.irix:
 # ELFs by the way].
 #
 link_o.hpux:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).sl; \
 	expr "$(CFLAGS)" : '.*DSO_DLFCN' > /dev/null && SHLIB=lib$(LIBNAME).so; \
@@ -471,7 +513,7 @@ link_o.hpux:
 	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
 	$(LINK_SO_O) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
 link_a.hpux:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_SO); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_SO); else \
 	$(CALC_VERSIONS); \
 	SHLIB=lib$(LIBNAME).sl; \
 	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
@@ -484,7 +526,7 @@ link_a.hpux:
 	rm -f $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX || :; \
 	$(LINK_SO_A) && chmod a=rx $$SHLIB$$SHLIB_SOVER$$SHLIB_SUFFIX
 link_app.hpux:
-	@if ${DETECT_GNU_LD}; then $(DO_GNU_APP); else \
+	@if $(DETECT_GNU_LD); then $(DO_GNU_APP); else \
 	LDFLAGS="$(CFLAGS) -Wl,+s,+cdp,../:,+cdp,./:,+b,$(LIBRPATH)"; \
 	fi; \
 	$(LINK_APP)
@@ -549,7 +591,7 @@ symlink.hpux:
 	expr $(PLATFORM) : '.*ia64' > /dev/null && SHLIB=lib$(LIBNAME).so; \
 	$(SYMLINK_SO)
 # The following lines means those specific architectures do no symlinks
-symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath:
+symlink.cygwin symlink.alpha-osf1 symlink.tru64 symlink.tru64-rpath symlink.beos:
 
 # Compatibility targets
 link_o.bsd-gcc-shared link_o.linux-shared link_o.gnu-shared: link_o.gnu
@@ -607,3 +649,7 @@ link_o.reliantunix-shared: link_o.reliantunix
 link_a.reliantunix-shared: link_a.reliantunix
 link_app.reliantunix-shared: link_app.reliantunix
 symlink.reliantunix-shared: symlink.reliantunix
+link_o.beos-shared: link_o.beos
+link_a.beos-shared: link_a.beos
+link_app.beos-shared: link_app.gnu
+symlink.beos-shared: symlink.beos
diff --git a/NEWS b/NEWS
index b36d1d8e463f..4f069cbd14ca 100644
--- a/NEWS
+++ b/NEWS
@@ -5,36 +5,108 @@
   This file gives a brief overview of the major changes between each OpenSSL
   release. For more details please read the CHANGES file.
 
-  Major changes between OpenSSL 0.9.8w and OpenSSL 0.9.8x:
+  Major changes between OpenSSL 1.0.1b and OpenSSL 1.0.1c:
 
-      o Fix DTLS record length checking bug CVE-2012-2333
+      o Fix TLS/DTLS record length checking bug CVE-2012-2333
+      o Don't attempt to use non-FIPS composite ciphers in FIPS mode.
 
-  Major changes between OpenSSL 0.9.8v and OpenSSL 0.9.8w:
+  Major changes between OpenSSL 1.0.1a and OpenSSL 1.0.1b:
 
-      o Fix for CVE-2012-2131 (corrected fix for 0.9.8 and CVE-2012-2110)
+      o Fix compilation error on non-x86 platforms.
+      o Make FIPS capable OpenSSL ciphers work in non-FIPS mode.
+      o Fix SSL_OP_NO_TLSv1_1 clash with SSL_OP_ALL in OpenSSL 1.0.0
 
-  Major changes between OpenSSL 0.9.8u and OpenSSL 0.9.8v:
+  Major changes between OpenSSL 1.0.1 and OpenSSL 1.0.1a:
 
       o Fix for ASN1 overflow bug CVE-2012-2110
+      o Workarounds for some servers that hang on long client hellos.
+      o Fix SEGV in AES code.
 
-  Major changes between OpenSSL 0.9.8t and OpenSSL 0.9.8u:
+  Major changes between OpenSSL 1.0.0h and OpenSSL 1.0.1:
+
+      o TLS/DTLS heartbeat support.
+      o SCTP support.
+      o RFC 5705 TLS key material exporter.
+      o RFC 5764 DTLS-SRTP negotiation.
+      o Next Protocol Negotiation.
+      o PSS signatures in certificates, requests and CRLs.
+      o Support for password based recipient info for CMS.
+      o Support TLS v1.2 and TLS v1.1.
+      o Preliminary FIPS capability for unvalidated 2.0 FIPS module.
+      o SRP support.
+
+  Major changes between OpenSSL 1.0.0g and OpenSSL 1.0.0h:
 
       o Fix for CMS/PKCS#7 MMA CVE-2012-0884
       o Corrected fix for CVE-2011-4619
       o Various DTLS fixes.
 
-  Major changes between OpenSSL 0.9.8s and OpenSSL 0.9.8t:
+  Major changes between OpenSSL 1.0.0f and OpenSSL 1.0.0g:
 
       o Fix for DTLS DoS issue CVE-2012-0050
 
-  Major changes between OpenSSL 0.9.8r and OpenSSL 0.9.8s:
+  Major changes between OpenSSL 1.0.0e and OpenSSL 1.0.0f:
 
       o Fix for DTLS plaintext recovery attack CVE-2011-4108
-      o Fix policy check double free error CVE-2011-4109
       o Clear block padding bytes of SSL 3.0 records CVE-2011-4576
       o Only allow one SGC handshake restart for SSL/TLS CVE-2011-4619
+      o Check parameters are not NULL in GOST ENGINE CVE-2012-0027
       o Check for malformed RFC3779 data CVE-2011-4577
 
+  Major changes between OpenSSL 1.0.0d and OpenSSL 1.0.0e:
+
+      o Fix for CRL vulnerability issue CVE-2011-3207
+      o Fix for ECDH crashes CVE-2011-3210
+      o Protection against EC timing attacks.
+      o Support ECDH ciphersuites for certificates using SHA2 algorithms.
+      o Various DTLS fixes.
+
+  Major changes between OpenSSL 1.0.0c and OpenSSL 1.0.0d:
+
+      o Fix for security issue CVE-2011-0014
+
+  Major changes between OpenSSL 1.0.0b and OpenSSL 1.0.0c:
+
+      o Fix for security issue CVE-2010-4180
+      o Fix for CVE-2010-4252
+      o Fix mishandling of absent EC point format extension.
+      o Fix various platform compilation issues.
+      o Corrected fix for security issue CVE-2010-3864.
+
+  Major changes between OpenSSL 1.0.0a and OpenSSL 1.0.0b:
+
+      o Fix for security issue CVE-2010-3864.
+      o Fix for CVE-2010-2939
+      o Fix WIN32 build system for GOST ENGINE.
+
+  Major changes between OpenSSL 1.0.0 and OpenSSL 1.0.0a:
+
+      o Fix for security issue CVE-2010-1633.
+      o GOST MAC and CFB fixes.
+
+  Major changes between OpenSSL 0.9.8n and OpenSSL 1.0.0:
+
+      o RFC3280 path validation: sufficient to process PKITS tests.
+      o Integrated support for PVK files and keyblobs.
+      o Change default private key format to PKCS#8.
+      o CMS support: able to process all examples in RFC4134
+      o Streaming ASN1 encode support for PKCS#7 and CMS.
+      o Multiple signer and signer add support for PKCS#7 and CMS.
+      o ASN1 printing support.
+      o Whirlpool hash algorithm added.
+      o RFC3161 time stamp support.
+      o New generalised public key API supporting ENGINE based algorithms.
+      o New generalised public key API utilities.
+      o New ENGINE supporting GOST algorithms.
+      o SSL/TLS GOST ciphersuite support.
+      o PKCS#7 and CMS GOST support.
+      o RFC4279 PSK ciphersuite support.
+      o Supported points format extension for ECC ciphersuites.
+      o ecdsa-with-SHA224/256/384/512 signature types.
+      o dsa-with-SHA224 and dsa-with-SHA256 signature types.
+      o Opaque PRF Input TLS extension support.
+      o Updated time routines to avoid OS limitations.
+
   Major changes between OpenSSL 0.9.8q and OpenSSL 0.9.8r:
 
       o Fix for security issue CVE-2011-0014
diff --git a/README b/README
index fea385336709..de51583a6ff6 100644
--- a/README
+++ b/README
@@ -1,5 +1,5 @@
 
- OpenSSL 0.9.8x 10 May 2012
+ OpenSSL 1.0.1c 10 May 2012
 
  Copyright (c) 1998-2011 The OpenSSL Project
  Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson
diff --git a/apps/Makefile b/apps/Makefile
index e33ad2b613a3..95f499e33054 100644
--- a/apps/Makefile
+++ b/apps/Makefile
@@ -31,15 +31,15 @@ LIBSSL=-L.. -lssl
 
 PROGRAM= openssl
 
-SCRIPTS=CA.sh CA.pl
+SCRIPTS=CA.sh CA.pl tsget
 
 EXE= $(PROGRAM)$(EXE_EXT)
 
 E_EXE=	verify asn1pars req dgst dh dhparam enc passwd gendh errstr \
 	ca crl rsa rsautl dsa dsaparam ec ecparam \
-	x509 genrsa gendsa s_server s_client speed \
+	x509 genrsa gendsa genpkey s_server s_client speed \
 	s_time version pkcs7 cms crl2pkcs7 sess_id ciphers nseq pkcs12 \
-	pkcs8 spkac smime rand engine ocsp prime
+	pkcs8 pkey pkeyparam pkeyutl spkac smime rand engine ocsp prime ts srp
 
 PROGS= $(PROGRAM).c
 
@@ -53,18 +53,18 @@ RAND_SRC=app_rand.c
 E_OBJ=	verify.o asn1pars.o req.o dgst.o dh.o dhparam.o enc.o passwd.o gendh.o errstr.o \
 	ca.o pkcs7.o crl2p7.o crl.o \
 	rsa.o rsautl.o dsa.o dsaparam.o ec.o ecparam.o \
-	x509.o genrsa.o gendsa.o s_server.o s_client.o speed.o \
+	x509.o genrsa.o gendsa.o genpkey.o s_server.o s_client.o speed.o \
 	s_time.o $(A_OBJ) $(S_OBJ) $(RAND_OBJ) version.o sess_id.o \
-	ciphers.o nseq.o pkcs12.o pkcs8.o spkac.o smime.o rand.o engine.o \
-	ocsp.o prime.o cms.o
+	ciphers.o nseq.o pkcs12.o pkcs8.o pkey.o pkeyparam.o pkeyutl.o \
+	spkac.o smime.o cms.o rand.o engine.o ocsp.o prime.o ts.o srp.o
 
 E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c passwd.c gendh.c errstr.c ca.c \
 	pkcs7.c crl2p7.c crl.c \
 	rsa.c rsautl.c dsa.c dsaparam.c ec.c ecparam.c \
-	x509.c genrsa.c gendsa.c s_server.c s_client.c speed.c \
+	x509.c genrsa.c gendsa.c genpkey.c s_server.c s_client.c speed.c \
 	s_time.c $(A_SRC) $(S_SRC) $(RAND_SRC) version.c sess_id.c \
-	ciphers.c nseq.c pkcs12.c pkcs8.c spkac.c smime.c rand.c engine.c \
-	ocsp.c prime.c cms.c
+	ciphers.c nseq.c pkcs12.c pkcs8.c pkey.c pkeyparam.c pkeyutl.c \
+	spkac.c smime.c cms.c rand.c engine.c ocsp.c prime.c ts.c srp.c
 
 SRC=$(E_SRC)
 
@@ -137,9 +137,10 @@ depend:
 dclean:
 	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
 	mv -f Makefile.new $(MAKEFILE)
+	rm -f CA.pl
 
 clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff $(EXE)
+	rm -f *.o *.obj *.dll lib tags core .pure .nfs* *.old *.bak fluff $(EXE)
 	rm -f req
 
 $(DLIBSSL):
@@ -153,19 +154,14 @@ $(EXE): progs.h $(E_OBJ) $(PROGRAM).o $(DLIBCRYPTO) $(DLIBSSL)
 	shlib_target=; if [ -n "$(SHARED_LIBS)" ]; then \
 		shlib_target="$(SHLIB_TARGET)"; \
 	elif [ -n "$(FIPSCANLIB)" ]; then \
-	  FIPSLD_CC="$(CC)"; CC=$(TOP)/fips/fipsld; export CC FIPSLD_CC; \
+	  FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; export CC FIPSLD_CC; \
 	fi; \
 	LIBRARIES="$(LIBSSL) $(LIBKRB5) $(LIBCRYPTO)" ; \
-	[ "x$(FIPSCANLIB)" = "xlibfips" ] && LIBRARIES="$$LIBRARIES -lfips"; \
 	$(MAKE) -f $(TOP)/Makefile.shared -e \
-		CC="$${CC}" APPNAME=$(EXE) OBJECTS="$(PROGRAM).o $(E_OBJ)" \
+		APPNAME=$(EXE) OBJECTS="$(PROGRAM).o $(E_OBJ)" \
 		LIBDEPS="$(PEX_LIBS) $$LIBRARIES $(EX_LIBS)" \
 		link_app.$${shlib_target}
-	@if [ -z "$(CROSS_COMPILE)" ]; then \
-		(cd ..; \
-	  	OPENSSL="`pwd`/util/opensslwrap.sh"; export OPENSSL; \
-	  	$(PERL) tools/c_rehash certs) \
-	fi
+	@(cd ..; $(MAKE) rehash)
 
 progs.h: progs.pl
 	$(PERL) progs.pl $(E_EXE) >progs.h
@@ -176,9 +172,9 @@ progs.h: progs.pl
 app_rand.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 app_rand.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 app_rand.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-app_rand.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-app_rand.o: ../include/openssl/engine.h ../include/openssl/evp.h
-app_rand.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+app_rand.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+app_rand.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+app_rand.o: ../include/openssl/evp.h ../include/openssl/lhash.h
 app_rand.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 app_rand.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 app_rand.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
@@ -192,9 +188,9 @@ apps.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 apps.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 apps.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 apps.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-apps.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-apps.o: ../include/openssl/err.h ../include/openssl/evp.h
-apps.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+apps.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+apps.o: ../include/openssl/engine.h ../include/openssl/err.h
+apps.o: ../include/openssl/evp.h ../include/openssl/lhash.h
 apps.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 apps.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 apps.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
@@ -208,9 +204,9 @@ apps.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.c apps.h
 asn1pars.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 asn1pars.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 asn1pars.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-asn1pars.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-asn1pars.o: ../include/openssl/engine.h ../include/openssl/err.h
-asn1pars.o: ../include/openssl/evp.h ../include/openssl/fips.h
+asn1pars.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+asn1pars.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+asn1pars.o: ../include/openssl/err.h ../include/openssl/evp.h
 asn1pars.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 asn1pars.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 asn1pars.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -225,9 +221,9 @@ ca.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 ca.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 ca.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 ca.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-ca.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-ca.o: ../include/openssl/err.h ../include/openssl/evp.h
-ca.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+ca.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+ca.o: ../include/openssl/engine.h ../include/openssl/err.h
+ca.o: ../include/openssl/evp.h ../include/openssl/lhash.h
 ca.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 ca.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 ca.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
@@ -238,36 +234,37 @@ ca.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
 ca.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
 ca.o: ../include/openssl/x509v3.h apps.h ca.c
 ciphers.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-ciphers.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-ciphers.o: ../include/openssl/comp.h ../include/openssl/conf.h
-ciphers.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-ciphers.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+ciphers.o: ../include/openssl/buffer.h ../include/openssl/comp.h
+ciphers.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+ciphers.o: ../include/openssl/dtls1.h ../include/openssl/e_os2.h
+ciphers.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
 ciphers.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
 ciphers.o: ../include/openssl/err.h ../include/openssl/evp.h
-ciphers.o: ../include/openssl/fips.h ../include/openssl/hmac.h
-ciphers.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-ciphers.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-ciphers.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-ciphers.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-ciphers.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-ciphers.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
+ciphers.o: ../include/openssl/hmac.h ../include/openssl/kssl.h
+ciphers.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+ciphers.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+ciphers.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+ciphers.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+ciphers.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 ciphers.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-ciphers.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-ciphers.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-ciphers.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-ciphers.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-ciphers.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-ciphers.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-ciphers.o: ciphers.c
+ciphers.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+ciphers.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+ciphers.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+ciphers.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+ciphers.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+ciphers.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+ciphers.o: ../include/openssl/x509v3.h apps.h ciphers.c
 cms.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-cms.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-cms.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-cms.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-cms.o: ../include/openssl/engine.h ../include/openssl/evp.h
-cms.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+cms.o: ../include/openssl/buffer.h ../include/openssl/cms.h
+cms.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+cms.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+cms.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+cms.o: ../include/openssl/engine.h ../include/openssl/err.h
+cms.o: ../include/openssl/evp.h ../include/openssl/lhash.h
 cms.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 cms.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 cms.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+cms.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 cms.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
 cms.o: ../include/openssl/sha.h ../include/openssl/stack.h
 cms.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
@@ -276,9 +273,9 @@ cms.o: ../include/openssl/x509v3.h apps.h cms.c
 crl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 crl.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 crl.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-crl.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-crl.o: ../include/openssl/engine.h ../include/openssl/err.h
-crl.o: ../include/openssl/evp.h ../include/openssl/fips.h
+crl.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+crl.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+crl.o: ../include/openssl/err.h ../include/openssl/evp.h
 crl.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 crl.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 crl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -291,9 +288,9 @@ crl.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h crl.c
 crl2p7.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 crl2p7.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 crl2p7.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-crl2p7.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-crl2p7.o: ../include/openssl/engine.h ../include/openssl/err.h
-crl2p7.o: ../include/openssl/evp.h ../include/openssl/fips.h
+crl2p7.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+crl2p7.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+crl2p7.o: ../include/openssl/err.h ../include/openssl/evp.h
 crl2p7.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 crl2p7.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 crl2p7.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -307,9 +304,9 @@ crl2p7.o: crl2p7.c
 dgst.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 dgst.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 dgst.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-dgst.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-dgst.o: ../include/openssl/engine.h ../include/openssl/err.h
-dgst.o: ../include/openssl/evp.h ../include/openssl/fips.h
+dgst.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+dgst.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+dgst.o: ../include/openssl/err.h ../include/openssl/evp.h
 dgst.o: ../include/openssl/hmac.h ../include/openssl/lhash.h
 dgst.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 dgst.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
@@ -324,9 +321,9 @@ dh.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 dh.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 dh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 dh.o: ../include/openssl/dh.h ../include/openssl/e_os2.h
-dh.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-dh.o: ../include/openssl/engine.h ../include/openssl/err.h
-dh.o: ../include/openssl/evp.h ../include/openssl/fips.h
+dh.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+dh.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+dh.o: ../include/openssl/err.h ../include/openssl/evp.h
 dh.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 dh.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 dh.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -340,9 +337,9 @@ dsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 dsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 dsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 dsa.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
-dsa.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-dsa.o: ../include/openssl/engine.h ../include/openssl/err.h
-dsa.o: ../include/openssl/evp.h ../include/openssl/fips.h
+dsa.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+dsa.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+dsa.o: ../include/openssl/err.h ../include/openssl/evp.h
 dsa.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 dsa.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 dsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -357,9 +354,9 @@ dsaparam.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 dsaparam.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 dsaparam.o: ../include/openssl/dh.h ../include/openssl/dsa.h
 dsaparam.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-dsaparam.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-dsaparam.o: ../include/openssl/err.h ../include/openssl/evp.h
-dsaparam.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+dsaparam.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+dsaparam.o: ../include/openssl/engine.h ../include/openssl/err.h
+dsaparam.o: ../include/openssl/evp.h ../include/openssl/lhash.h
 dsaparam.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 dsaparam.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 dsaparam.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
@@ -367,16 +364,16 @@ dsaparam.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 dsaparam.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 dsaparam.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
 dsaparam.o: ../include/openssl/sha.h ../include/openssl/stack.h
-dsaparam.o: ../include/openssl/store.h ../include/openssl/symhacks.h
-dsaparam.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-dsaparam.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-dsaparam.o: ../include/openssl/x509v3.h apps.h dsaparam.c
+dsaparam.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+dsaparam.o: ../include/openssl/ui.h ../include/openssl/x509.h
+dsaparam.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+dsaparam.o: dsaparam.c
 ec.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 ec.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 ec.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-ec.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-ec.o: ../include/openssl/engine.h ../include/openssl/err.h
-ec.o: ../include/openssl/evp.h ../include/openssl/fips.h
+ec.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+ec.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+ec.o: ../include/openssl/err.h ../include/openssl/evp.h
 ec.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 ec.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 ec.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -390,9 +387,9 @@ ecparam.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 ecparam.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 ecparam.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 ecparam.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-ecparam.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-ecparam.o: ../include/openssl/err.h ../include/openssl/evp.h
-ecparam.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+ecparam.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+ecparam.o: ../include/openssl/engine.h ../include/openssl/err.h
+ecparam.o: ../include/openssl/evp.h ../include/openssl/lhash.h
 ecparam.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 ecparam.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 ecparam.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
@@ -403,73 +400,71 @@ ecparam.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
 ecparam.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
 ecparam.o: ../include/openssl/x509v3.h apps.h ecparam.c
 enc.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-enc.o: ../include/openssl/buffer.h ../include/openssl/conf.h
-enc.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-enc.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
+enc.o: ../include/openssl/buffer.h ../include/openssl/comp.h
+enc.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+enc.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+enc.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
 enc.o: ../include/openssl/engine.h ../include/openssl/err.h
-enc.o: ../include/openssl/evp.h ../include/openssl/fips.h
-enc.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
-enc.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
-enc.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-enc.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
-enc.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
-enc.o: ../include/openssl/rand.h ../include/openssl/safestack.h
-enc.o: ../include/openssl/sha.h ../include/openssl/stack.h
-enc.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-enc.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-enc.o: ../include/openssl/x509v3.h apps.h enc.c
+enc.o: ../include/openssl/evp.h ../include/openssl/lhash.h
+enc.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+enc.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
+enc.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+enc.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+enc.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+enc.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+enc.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+enc.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+enc.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h enc.c
 engine.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-engine.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-engine.o: ../include/openssl/comp.h ../include/openssl/conf.h
-engine.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-engine.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+engine.o: ../include/openssl/buffer.h ../include/openssl/comp.h
+engine.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+engine.o: ../include/openssl/dtls1.h ../include/openssl/e_os2.h
+engine.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
 engine.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
 engine.o: ../include/openssl/err.h ../include/openssl/evp.h
-engine.o: ../include/openssl/fips.h ../include/openssl/hmac.h
-engine.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-engine.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-engine.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-engine.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-engine.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-engine.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
+engine.o: ../include/openssl/hmac.h ../include/openssl/kssl.h
+engine.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+engine.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+engine.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+engine.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+engine.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 engine.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-engine.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-engine.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-engine.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-engine.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-engine.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-engine.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-engine.o: engine.c
+engine.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+engine.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+engine.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+engine.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+engine.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+engine.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+engine.o: ../include/openssl/x509v3.h apps.h engine.c
 errstr.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-errstr.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-errstr.o: ../include/openssl/comp.h ../include/openssl/conf.h
-errstr.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-errstr.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+errstr.o: ../include/openssl/buffer.h ../include/openssl/comp.h
+errstr.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+errstr.o: ../include/openssl/dtls1.h ../include/openssl/e_os2.h
+errstr.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
 errstr.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
 errstr.o: ../include/openssl/err.h ../include/openssl/evp.h
-errstr.o: ../include/openssl/fips.h ../include/openssl/hmac.h
-errstr.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-errstr.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-errstr.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-errstr.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-errstr.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-errstr.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
+errstr.o: ../include/openssl/hmac.h ../include/openssl/kssl.h
+errstr.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+errstr.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+errstr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+errstr.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+errstr.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 errstr.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-errstr.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-errstr.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-errstr.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-errstr.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-errstr.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-errstr.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-errstr.o: errstr.c
+errstr.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+errstr.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+errstr.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+errstr.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+errstr.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+errstr.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+errstr.o: ../include/openssl/x509v3.h apps.h errstr.c
 gendh.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 gendh.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 gendh.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 gendh.o: ../include/openssl/dh.h ../include/openssl/dsa.h
 gendh.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-gendh.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-gendh.o: ../include/openssl/err.h ../include/openssl/evp.h
-gendh.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+gendh.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+gendh.o: ../include/openssl/engine.h ../include/openssl/err.h
+gendh.o: ../include/openssl/evp.h ../include/openssl/lhash.h
 gendh.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 gendh.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 gendh.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
@@ -477,17 +472,17 @@ gendh.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 gendh.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 gendh.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
 gendh.o: ../include/openssl/sha.h ../include/openssl/stack.h
-gendh.o: ../include/openssl/store.h ../include/openssl/symhacks.h
-gendh.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-gendh.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-gendh.o: ../include/openssl/x509v3.h apps.h gendh.c
+gendh.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+gendh.o: ../include/openssl/ui.h ../include/openssl/x509.h
+gendh.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+gendh.o: gendh.c
 gendsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 gendsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 gendsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 gendsa.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
-gendsa.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-gendsa.o: ../include/openssl/engine.h ../include/openssl/err.h
-gendsa.o: ../include/openssl/evp.h ../include/openssl/fips.h
+gendsa.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+gendsa.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+gendsa.o: ../include/openssl/err.h ../include/openssl/evp.h
 gendsa.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 gendsa.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 gendsa.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -498,14 +493,30 @@ gendsa.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
 gendsa.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
 gendsa.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
 gendsa.o: gendsa.c
+genpkey.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+genpkey.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+genpkey.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+genpkey.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+genpkey.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+genpkey.o: ../include/openssl/err.h ../include/openssl/evp.h
+genpkey.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+genpkey.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+genpkey.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+genpkey.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+genpkey.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+genpkey.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+genpkey.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+genpkey.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+genpkey.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+genpkey.o: genpkey.c
 genrsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 genrsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 genrsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 genrsa.o: ../include/openssl/dh.h ../include/openssl/dsa.h
 genrsa.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-genrsa.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-genrsa.o: ../include/openssl/err.h ../include/openssl/evp.h
-genrsa.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+genrsa.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+genrsa.o: ../include/openssl/engine.h ../include/openssl/err.h
+genrsa.o: ../include/openssl/evp.h ../include/openssl/lhash.h
 genrsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 genrsa.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 genrsa.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
@@ -513,16 +524,16 @@ genrsa.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 genrsa.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 genrsa.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
 genrsa.o: ../include/openssl/sha.h ../include/openssl/stack.h
-genrsa.o: ../include/openssl/store.h ../include/openssl/symhacks.h
-genrsa.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-genrsa.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-genrsa.o: ../include/openssl/x509v3.h apps.h genrsa.c
+genrsa.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+genrsa.o: ../include/openssl/ui.h ../include/openssl/x509.h
+genrsa.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+genrsa.o: genrsa.c
 nseq.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 nseq.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 nseq.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-nseq.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-nseq.o: ../include/openssl/engine.h ../include/openssl/err.h
-nseq.o: ../include/openssl/evp.h ../include/openssl/fips.h
+nseq.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+nseq.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+nseq.o: ../include/openssl/err.h ../include/openssl/evp.h
 nseq.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 nseq.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 nseq.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -537,51 +548,50 @@ ocsp.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 ocsp.o: ../include/openssl/comp.h ../include/openssl/conf.h
 ocsp.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
 ocsp.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-ocsp.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-ocsp.o: ../include/openssl/err.h ../include/openssl/evp.h
-ocsp.o: ../include/openssl/fips.h ../include/openssl/hmac.h
+ocsp.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+ocsp.o: ../include/openssl/engine.h ../include/openssl/err.h
+ocsp.o: ../include/openssl/evp.h ../include/openssl/hmac.h
 ocsp.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
 ocsp.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 ocsp.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 ocsp.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
 ocsp.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-ocsp.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
-ocsp.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-ocsp.o: ../include/openssl/sha.h ../include/openssl/ssl.h
+ocsp.o: ../include/openssl/pkcs7.h ../include/openssl/pqueue.h
+ocsp.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+ocsp.o: ../include/openssl/srtp.h ../include/openssl/ssl.h
 ocsp.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
 ocsp.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
 ocsp.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
 ocsp.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
 ocsp.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h ocsp.c
 openssl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-openssl.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-openssl.o: ../include/openssl/comp.h ../include/openssl/conf.h
-openssl.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-openssl.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+openssl.o: ../include/openssl/buffer.h ../include/openssl/comp.h
+openssl.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+openssl.o: ../include/openssl/dtls1.h ../include/openssl/e_os2.h
+openssl.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
 openssl.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
 openssl.o: ../include/openssl/err.h ../include/openssl/evp.h
-openssl.o: ../include/openssl/fips.h ../include/openssl/hmac.h
-openssl.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-openssl.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-openssl.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-openssl.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-openssl.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-openssl.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
+openssl.o: ../include/openssl/hmac.h ../include/openssl/kssl.h
+openssl.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+openssl.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+openssl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+openssl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+openssl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 openssl.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-openssl.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-openssl.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-openssl.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-openssl.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-openssl.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-openssl.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-openssl.o: openssl.c progs.h s_apps.h
+openssl.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+openssl.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+openssl.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+openssl.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+openssl.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+openssl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+openssl.o: ../include/openssl/x509v3.h apps.h openssl.c progs.h s_apps.h
 passwd.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 passwd.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 passwd.o: ../include/openssl/crypto.h ../include/openssl/des.h
 passwd.o: ../include/openssl/des_old.h ../include/openssl/e_os2.h
-passwd.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-passwd.o: ../include/openssl/engine.h ../include/openssl/err.h
-passwd.o: ../include/openssl/evp.h ../include/openssl/fips.h
+passwd.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+passwd.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+passwd.o: ../include/openssl/err.h ../include/openssl/evp.h
 passwd.o: ../include/openssl/lhash.h ../include/openssl/md5.h
 passwd.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 passwd.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
@@ -596,9 +606,9 @@ passwd.o: passwd.c
 pkcs12.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 pkcs12.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 pkcs12.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-pkcs12.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-pkcs12.o: ../include/openssl/engine.h ../include/openssl/err.h
-pkcs12.o: ../include/openssl/evp.h ../include/openssl/fips.h
+pkcs12.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+pkcs12.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+pkcs12.o: ../include/openssl/err.h ../include/openssl/evp.h
 pkcs12.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 pkcs12.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 pkcs12.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -612,9 +622,9 @@ pkcs12.o: ../include/openssl/x509v3.h apps.h pkcs12.c
 pkcs7.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 pkcs7.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 pkcs7.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-pkcs7.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-pkcs7.o: ../include/openssl/engine.h ../include/openssl/err.h
-pkcs7.o: ../include/openssl/evp.h ../include/openssl/fips.h
+pkcs7.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+pkcs7.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+pkcs7.o: ../include/openssl/err.h ../include/openssl/evp.h
 pkcs7.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 pkcs7.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 pkcs7.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -628,9 +638,9 @@ pkcs7.o: pkcs7.c
 pkcs8.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 pkcs8.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 pkcs8.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-pkcs8.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-pkcs8.o: ../include/openssl/engine.h ../include/openssl/err.h
-pkcs8.o: ../include/openssl/evp.h ../include/openssl/fips.h
+pkcs8.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+pkcs8.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+pkcs8.o: ../include/openssl/err.h ../include/openssl/evp.h
 pkcs8.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 pkcs8.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 pkcs8.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -641,12 +651,59 @@ pkcs8.o: ../include/openssl/sha.h ../include/openssl/stack.h
 pkcs8.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
 pkcs8.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
 pkcs8.o: ../include/openssl/x509v3.h apps.h pkcs8.c
+pkey.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+pkey.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+pkey.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+pkey.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+pkey.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+pkey.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkey.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+pkey.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+pkey.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkey.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+pkey.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+pkey.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+pkey.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+pkey.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+pkey.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h pkey.c
+pkeyparam.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+pkeyparam.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+pkeyparam.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+pkeyparam.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+pkeyparam.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+pkeyparam.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkeyparam.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+pkeyparam.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+pkeyparam.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkeyparam.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+pkeyparam.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+pkeyparam.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+pkeyparam.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+pkeyparam.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+pkeyparam.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+pkeyparam.o: pkeyparam.c
+pkeyutl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+pkeyutl.o: ../include/openssl/buffer.h ../include/openssl/conf.h
+pkeyutl.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
+pkeyutl.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+pkeyutl.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+pkeyutl.o: ../include/openssl/err.h ../include/openssl/evp.h
+pkeyutl.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+pkeyutl.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+pkeyutl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+pkeyutl.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+pkeyutl.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
+pkeyutl.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+pkeyutl.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+pkeyutl.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+pkeyutl.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+pkeyutl.o: pkeyutl.c
 prime.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 prime.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 prime.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 prime.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-prime.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-prime.o: ../include/openssl/evp.h ../include/openssl/fips.h
+prime.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+prime.o: ../include/openssl/engine.h ../include/openssl/evp.h
 prime.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 prime.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 prime.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -659,9 +716,9 @@ prime.o: prime.c
 rand.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 rand.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 rand.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-rand.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-rand.o: ../include/openssl/engine.h ../include/openssl/err.h
-rand.o: ../include/openssl/evp.h ../include/openssl/fips.h
+rand.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+rand.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+rand.o: ../include/openssl/err.h ../include/openssl/evp.h
 rand.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 rand.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 rand.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -676,9 +733,9 @@ req.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 req.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 req.o: ../include/openssl/dh.h ../include/openssl/dsa.h
 req.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-req.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-req.o: ../include/openssl/err.h ../include/openssl/evp.h
-req.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+req.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+req.o: ../include/openssl/engine.h ../include/openssl/err.h
+req.o: ../include/openssl/evp.h ../include/openssl/lhash.h
 req.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 req.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 req.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
@@ -686,17 +743,16 @@ req.o: ../include/openssl/pem.h ../include/openssl/pem2.h
 req.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
 req.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
 req.o: ../include/openssl/sha.h ../include/openssl/stack.h
-req.o: ../include/openssl/store.h ../include/openssl/symhacks.h
-req.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-req.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-req.o: ../include/openssl/x509v3.h apps.h req.c
+req.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+req.o: ../include/openssl/ui.h ../include/openssl/x509.h
+req.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h req.c
 rsa.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 rsa.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 rsa.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 rsa.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-rsa.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-rsa.o: ../include/openssl/err.h ../include/openssl/evp.h
-rsa.o: ../include/openssl/fips.h ../include/openssl/lhash.h
+rsa.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+rsa.o: ../include/openssl/engine.h ../include/openssl/err.h
+rsa.o: ../include/openssl/evp.h ../include/openssl/lhash.h
 rsa.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 rsa.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 rsa.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
@@ -709,9 +765,9 @@ rsa.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h rsa.c
 rsautl.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 rsautl.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 rsautl.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-rsautl.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-rsautl.o: ../include/openssl/engine.h ../include/openssl/err.h
-rsautl.o: ../include/openssl/evp.h ../include/openssl/fips.h
+rsautl.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+rsautl.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+rsautl.o: ../include/openssl/err.h ../include/openssl/evp.h
 rsautl.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 rsautl.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 rsautl.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -723,146 +779,144 @@ rsautl.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
 rsautl.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
 rsautl.o: ../include/openssl/x509v3.h apps.h rsautl.c
 s_cb.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-s_cb.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-s_cb.o: ../include/openssl/comp.h ../include/openssl/conf.h
-s_cb.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-s_cb.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+s_cb.o: ../include/openssl/buffer.h ../include/openssl/comp.h
+s_cb.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+s_cb.o: ../include/openssl/dtls1.h ../include/openssl/e_os2.h
+s_cb.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
 s_cb.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
 s_cb.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_cb.o: ../include/openssl/fips.h ../include/openssl/hmac.h
-s_cb.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-s_cb.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_cb.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-s_cb.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-s_cb.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_cb.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
+s_cb.o: ../include/openssl/hmac.h ../include/openssl/kssl.h
+s_cb.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+s_cb.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+s_cb.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_cb.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+s_cb.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 s_cb.o: ../include/openssl/pqueue.h ../include/openssl/rand.h
 s_cb.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_cb.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_cb.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_cb.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-s_cb.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-s_cb.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-s_cb.o: ../include/openssl/x509v3.h apps.h s_apps.h s_cb.c
+s_cb.o: ../include/openssl/srtp.h ../include/openssl/ssl.h
+s_cb.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+s_cb.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+s_cb.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_cb.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+s_cb.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+s_cb.o: s_apps.h s_cb.c
 s_client.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 s_client.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 s_client.o: ../include/openssl/comp.h ../include/openssl/conf.h
 s_client.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
 s_client.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-s_client.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-s_client.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_client.o: ../include/openssl/fips.h ../include/openssl/hmac.h
+s_client.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+s_client.o: ../include/openssl/engine.h ../include/openssl/err.h
+s_client.o: ../include/openssl/evp.h ../include/openssl/hmac.h
 s_client.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
 s_client.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 s_client.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 s_client.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
 s_client.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_client.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
-s_client.o: ../include/openssl/pqueue.h ../include/openssl/rand.h
-s_client.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-s_client.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
-s_client.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
-s_client.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-s_client.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
-s_client.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
-s_client.o: ../include/openssl/x509v3.h apps.h s_apps.h s_client.c timeouts.h
+s_client.o: ../include/openssl/pkcs7.h ../include/openssl/pqueue.h
+s_client.o: ../include/openssl/rand.h ../include/openssl/safestack.h
+s_client.o: ../include/openssl/sha.h ../include/openssl/srp.h
+s_client.o: ../include/openssl/srtp.h ../include/openssl/ssl.h
+s_client.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
+s_client.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
+s_client.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
+s_client.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+s_client.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
+s_client.o: s_apps.h s_client.c timeouts.h
 s_server.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 s_server.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 s_server.o: ../include/openssl/comp.h ../include/openssl/conf.h
 s_server.o: ../include/openssl/crypto.h ../include/openssl/dh.h
 s_server.o: ../include/openssl/dsa.h ../include/openssl/dtls1.h
 s_server.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
-s_server.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
-s_server.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_server.o: ../include/openssl/fips.h ../include/openssl/hmac.h
+s_server.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+s_server.o: ../include/openssl/engine.h ../include/openssl/err.h
+s_server.o: ../include/openssl/evp.h ../include/openssl/hmac.h
 s_server.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
 s_server.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
 s_server.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
 s_server.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
 s_server.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_server.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
-s_server.o: ../include/openssl/pqueue.h ../include/openssl/rand.h
-s_server.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-s_server.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_server.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_server.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_server.o: ../include/openssl/store.h ../include/openssl/symhacks.h
+s_server.o: ../include/openssl/pkcs7.h ../include/openssl/pqueue.h
+s_server.o: ../include/openssl/rand.h ../include/openssl/rsa.h
+s_server.o: ../include/openssl/safestack.h ../include/openssl/sha.h
+s_server.o: ../include/openssl/srp.h ../include/openssl/srtp.h
+s_server.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_server.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_server.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
 s_server.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
 s_server.o: ../include/openssl/ui.h ../include/openssl/x509.h
 s_server.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
 s_server.o: s_apps.h s_server.c timeouts.h
 s_socket.o: ../e_os.h ../e_os2.h ../include/openssl/asn1.h
-s_socket.o: ../include/openssl/bio.h ../include/openssl/bn.h
-s_socket.o: ../include/openssl/buffer.h ../include/openssl/comp.h
-s_socket.o: ../include/openssl/conf.h ../include/openssl/crypto.h
-s_socket.o: ../include/openssl/dtls1.h ../include/openssl/e_os2.h
-s_socket.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
+s_socket.o: ../include/openssl/bio.h ../include/openssl/buffer.h
+s_socket.o: ../include/openssl/comp.h ../include/openssl/conf.h
+s_socket.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
+s_socket.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+s_socket.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
 s_socket.o: ../include/openssl/engine.h ../include/openssl/evp.h
-s_socket.o: ../include/openssl/fips.h ../include/openssl/hmac.h
-s_socket.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-s_socket.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_socket.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-s_socket.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-s_socket.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_socket.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
+s_socket.o: ../include/openssl/hmac.h ../include/openssl/kssl.h
+s_socket.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+s_socket.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+s_socket.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_socket.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+s_socket.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 s_socket.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-s_socket.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_socket.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_socket.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_socket.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_socket.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-s_socket.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-s_socket.o: s_apps.h s_socket.c
+s_socket.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+s_socket.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_socket.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_socket.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_socket.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+s_socket.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+s_socket.o: ../include/openssl/x509v3.h apps.h s_apps.h s_socket.c
 s_time.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-s_time.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-s_time.o: ../include/openssl/comp.h ../include/openssl/conf.h
-s_time.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-s_time.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+s_time.o: ../include/openssl/buffer.h ../include/openssl/comp.h
+s_time.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+s_time.o: ../include/openssl/dtls1.h ../include/openssl/e_os2.h
+s_time.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
 s_time.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
 s_time.o: ../include/openssl/err.h ../include/openssl/evp.h
-s_time.o: ../include/openssl/fips.h ../include/openssl/hmac.h
-s_time.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-s_time.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-s_time.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-s_time.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-s_time.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-s_time.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
+s_time.o: ../include/openssl/hmac.h ../include/openssl/kssl.h
+s_time.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+s_time.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+s_time.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+s_time.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+s_time.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 s_time.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-s_time.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-s_time.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-s_time.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-s_time.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-s_time.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-s_time.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-s_time.o: s_apps.h s_time.c
+s_time.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+s_time.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+s_time.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+s_time.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+s_time.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+s_time.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+s_time.o: ../include/openssl/x509v3.h apps.h s_apps.h s_time.c
 sess_id.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
-sess_id.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-sess_id.o: ../include/openssl/comp.h ../include/openssl/conf.h
-sess_id.o: ../include/openssl/crypto.h ../include/openssl/dtls1.h
-sess_id.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+sess_id.o: ../include/openssl/buffer.h ../include/openssl/comp.h
+sess_id.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+sess_id.o: ../include/openssl/dtls1.h ../include/openssl/e_os2.h
+sess_id.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
 sess_id.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
 sess_id.o: ../include/openssl/err.h ../include/openssl/evp.h
-sess_id.o: ../include/openssl/fips.h ../include/openssl/hmac.h
-sess_id.o: ../include/openssl/kssl.h ../include/openssl/lhash.h
-sess_id.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-sess_id.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-sess_id.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-sess_id.o: ../include/openssl/pem.h ../include/openssl/pem2.h
-sess_id.o: ../include/openssl/pkcs7.h ../include/openssl/pq_compat.h
+sess_id.o: ../include/openssl/hmac.h ../include/openssl/kssl.h
+sess_id.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+sess_id.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+sess_id.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+sess_id.o: ../include/openssl/ossl_typ.h ../include/openssl/pem.h
+sess_id.o: ../include/openssl/pem2.h ../include/openssl/pkcs7.h
 sess_id.o: ../include/openssl/pqueue.h ../include/openssl/safestack.h
-sess_id.o: ../include/openssl/sha.h ../include/openssl/ssl.h
-sess_id.o: ../include/openssl/ssl2.h ../include/openssl/ssl23.h
-sess_id.o: ../include/openssl/ssl3.h ../include/openssl/stack.h
-sess_id.o: ../include/openssl/symhacks.h ../include/openssl/tls1.h
-sess_id.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
-sess_id.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-sess_id.o: sess_id.c
+sess_id.o: ../include/openssl/sha.h ../include/openssl/srtp.h
+sess_id.o: ../include/openssl/ssl.h ../include/openssl/ssl2.h
+sess_id.o: ../include/openssl/ssl23.h ../include/openssl/ssl3.h
+sess_id.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+sess_id.o: ../include/openssl/tls1.h ../include/openssl/txt_db.h
+sess_id.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+sess_id.o: ../include/openssl/x509v3.h apps.h sess_id.c
 smime.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 smime.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 smime.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-smime.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-smime.o: ../include/openssl/engine.h ../include/openssl/err.h
-smime.o: ../include/openssl/evp.h ../include/openssl/fips.h
+smime.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+smime.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+smime.o: ../include/openssl/err.h ../include/openssl/evp.h
 smime.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 smime.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 smime.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -876,33 +930,35 @@ smime.o: smime.c
 speed.o: ../e_os.h ../include/openssl/aes.h ../include/openssl/asn1.h
 speed.o: ../include/openssl/bio.h ../include/openssl/blowfish.h
 speed.o: ../include/openssl/bn.h ../include/openssl/buffer.h
-speed.o: ../include/openssl/cast.h ../include/openssl/conf.h
-speed.o: ../include/openssl/crypto.h ../include/openssl/des.h
-speed.o: ../include/openssl/des_old.h ../include/openssl/dsa.h
-speed.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+speed.o: ../include/openssl/camellia.h ../include/openssl/cast.h
+speed.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+speed.o: ../include/openssl/des.h ../include/openssl/des_old.h
+speed.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
+speed.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
 speed.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
 speed.o: ../include/openssl/err.h ../include/openssl/evp.h
-speed.o: ../include/openssl/fips.h ../include/openssl/hmac.h
-speed.o: ../include/openssl/idea.h ../include/openssl/lhash.h
-speed.o: ../include/openssl/md2.h ../include/openssl/md4.h
-speed.o: ../include/openssl/md5.h ../include/openssl/obj_mac.h
+speed.o: ../include/openssl/hmac.h ../include/openssl/idea.h
+speed.o: ../include/openssl/lhash.h ../include/openssl/md4.h
+speed.o: ../include/openssl/md5.h ../include/openssl/mdc2.h
+speed.o: ../include/openssl/modes.h ../include/openssl/obj_mac.h
 speed.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 speed.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
 speed.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
 speed.o: ../include/openssl/rand.h ../include/openssl/rc2.h
 speed.o: ../include/openssl/rc4.h ../include/openssl/ripemd.h
 speed.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
-speed.o: ../include/openssl/sha.h ../include/openssl/stack.h
-speed.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
-speed.o: ../include/openssl/ui.h ../include/openssl/ui_compat.h
+speed.o: ../include/openssl/seed.h ../include/openssl/sha.h
+speed.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+speed.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
+speed.o: ../include/openssl/ui_compat.h ../include/openssl/whrlpool.h
 speed.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
 speed.o: ../include/openssl/x509v3.h apps.h speed.c testdsa.h testrsa.h
 spkac.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 spkac.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 spkac.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-spkac.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-spkac.o: ../include/openssl/engine.h ../include/openssl/err.h
-spkac.o: ../include/openssl/evp.h ../include/openssl/fips.h
+spkac.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+spkac.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+spkac.o: ../include/openssl/err.h ../include/openssl/evp.h
 spkac.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 spkac.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 spkac.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -913,12 +969,45 @@ spkac.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
 spkac.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
 spkac.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
 spkac.o: spkac.c
+srp.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+srp.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+srp.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+srp.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+srp.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+srp.o: ../include/openssl/engine.h ../include/openssl/err.h
+srp.o: ../include/openssl/evp.h ../include/openssl/lhash.h
+srp.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+srp.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
+srp.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+srp.o: ../include/openssl/pkcs7.h ../include/openssl/safestack.h
+srp.o: ../include/openssl/sha.h ../include/openssl/srp.h
+srp.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
+srp.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+srp.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h srp.c
+ts.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
+ts.o: ../include/openssl/bn.h ../include/openssl/buffer.h
+ts.o: ../include/openssl/conf.h ../include/openssl/crypto.h
+ts.o: ../include/openssl/dh.h ../include/openssl/dsa.h
+ts.o: ../include/openssl/e_os2.h ../include/openssl/ec.h
+ts.o: ../include/openssl/ecdh.h ../include/openssl/ecdsa.h
+ts.o: ../include/openssl/engine.h ../include/openssl/err.h
+ts.o: ../include/openssl/evp.h ../include/openssl/lhash.h
+ts.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
+ts.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
+ts.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
+ts.o: ../include/openssl/pem.h ../include/openssl/pem2.h
+ts.o: ../include/openssl/pkcs7.h ../include/openssl/rand.h
+ts.o: ../include/openssl/rsa.h ../include/openssl/safestack.h
+ts.o: ../include/openssl/sha.h ../include/openssl/stack.h
+ts.o: ../include/openssl/symhacks.h ../include/openssl/ts.h
+ts.o: ../include/openssl/txt_db.h ../include/openssl/x509.h
+ts.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h ts.c
 verify.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 verify.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 verify.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-verify.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-verify.o: ../include/openssl/engine.h ../include/openssl/err.h
-verify.o: ../include/openssl/evp.h ../include/openssl/fips.h
+verify.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+verify.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+verify.o: ../include/openssl/err.h ../include/openssl/evp.h
 verify.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 verify.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 verify.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
@@ -934,27 +1023,26 @@ version.o: ../include/openssl/blowfish.h ../include/openssl/bn.h
 version.o: ../include/openssl/buffer.h ../include/openssl/conf.h
 version.o: ../include/openssl/crypto.h ../include/openssl/des.h
 version.o: ../include/openssl/des_old.h ../include/openssl/e_os2.h
-version.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-version.o: ../include/openssl/engine.h ../include/openssl/evp.h
-version.o: ../include/openssl/fips.h ../include/openssl/idea.h
-version.o: ../include/openssl/lhash.h ../include/openssl/md2.h
-version.o: ../include/openssl/obj_mac.h ../include/openssl/objects.h
-version.o: ../include/openssl/ocsp.h ../include/openssl/opensslconf.h
-version.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-version.o: ../include/openssl/pkcs7.h ../include/openssl/rc4.h
-version.o: ../include/openssl/safestack.h ../include/openssl/sha.h
-version.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-version.o: ../include/openssl/txt_db.h ../include/openssl/ui.h
-version.o: ../include/openssl/ui_compat.h ../include/openssl/x509.h
-version.o: ../include/openssl/x509_vfy.h ../include/openssl/x509v3.h apps.h
-version.o: version.c
+version.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+version.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+version.o: ../include/openssl/evp.h ../include/openssl/idea.h
+version.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
+version.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
+version.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
+version.o: ../include/openssl/ossl_typ.h ../include/openssl/pkcs7.h
+version.o: ../include/openssl/rc4.h ../include/openssl/safestack.h
+version.o: ../include/openssl/sha.h ../include/openssl/stack.h
+version.o: ../include/openssl/symhacks.h ../include/openssl/txt_db.h
+version.o: ../include/openssl/ui.h ../include/openssl/ui_compat.h
+version.o: ../include/openssl/x509.h ../include/openssl/x509_vfy.h
+version.o: ../include/openssl/x509v3.h apps.h version.c
 x509.o: ../e_os.h ../include/openssl/asn1.h ../include/openssl/bio.h
 x509.o: ../include/openssl/bn.h ../include/openssl/buffer.h
 x509.o: ../include/openssl/conf.h ../include/openssl/crypto.h
 x509.o: ../include/openssl/dsa.h ../include/openssl/e_os2.h
-x509.o: ../include/openssl/ec.h ../include/openssl/ecdsa.h
-x509.o: ../include/openssl/engine.h ../include/openssl/err.h
-x509.o: ../include/openssl/evp.h ../include/openssl/fips.h
+x509.o: ../include/openssl/ec.h ../include/openssl/ecdh.h
+x509.o: ../include/openssl/ecdsa.h ../include/openssl/engine.h
+x509.o: ../include/openssl/err.h ../include/openssl/evp.h
 x509.o: ../include/openssl/lhash.h ../include/openssl/obj_mac.h
 x509.o: ../include/openssl/objects.h ../include/openssl/ocsp.h
 x509.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
diff --git a/apps/apps.c b/apps/apps.c
index a4b77e13e3ad..4e11915b0255 100644
--- a/apps/apps.c
+++ b/apps/apps.c
@@ -109,12 +109,21 @@
  *
  */
 
+#if !defined(_POSIX_C_SOURCE) && defined(OPENSSL_SYS_VMS)
+#define _POSIX_C_SOURCE 2	/* On VMS, you need to define this to get
+				   the declaration of fileno().  The value
+				   2 is to make sure no function defined
+				   in POSIX-2 is left undefined. */
+#endif
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#if !defined(OPENSSL_SYSNAME_WIN32) && !defined(NETWARE_CLIB)
+#include <strings.h>
+#endif
 #include <sys/types.h>
-#include <sys/stat.h>
 #include <ctype.h>
+#include <errno.h>
 #include <assert.h>
 #include <openssl/err.h>
 #include <openssl/x509.h>
@@ -138,6 +147,11 @@
 #include "apps.h"
 #undef NON_MAIN
 
+#ifdef _WIN32
+static int WIN32_rename(const char *from, const char *to);
+#define rename(from,to) WIN32_rename((from),(to))
+#endif
+
 typedef struct {
 	const char *name;
 	unsigned long flag;
@@ -166,18 +180,23 @@ int args_from_file(char *file, int *argc, char **argv[])
 	static char *buf=NULL;
 	static char **arg=NULL;
 	char *p;
-	struct stat stbuf;
-
-	if (stat(file,&stbuf) < 0) return(0);
 
 	fp=fopen(file,"r");
 	if (fp == NULL)
 		return(0);
 
+	if (fseek(fp,0,SEEK_END)==0)
+		len=ftell(fp), rewind(fp);
+	else	len=-1;
+	if (len<=0)
+		{
+		fclose(fp);
+		return(0);
+		}
+
 	*argc=0;
 	*argv=NULL;
 
-	len=(unsigned int)stbuf.st_size;
 	if (buf != NULL) OPENSSL_free(buf);
 	buf=(char *)OPENSSL_malloc(len+1);
 	if (buf == NULL) return(0);
@@ -238,22 +257,31 @@ int args_from_file(char *file, int *argc, char **argv[])
 
 int str2fmt(char *s)
 	{
+	if (s == NULL)
+		return FORMAT_UNDEF;
 	if 	((*s == 'D') || (*s == 'd'))
 		return(FORMAT_ASN1);
 	else if ((*s == 'T') || (*s == 't'))
 		return(FORMAT_TEXT);
-	else if ((*s == 'P') || (*s == 'p'))
-		return(FORMAT_PEM);
-	else if ((*s == 'N') || (*s == 'n'))
-		return(FORMAT_NETSCAPE);
-	else if ((*s == 'S') || (*s == 's'))
-		return(FORMAT_SMIME);
+  	else if ((*s == 'N') || (*s == 'n'))
+  		return(FORMAT_NETSCAPE);
+  	else if ((*s == 'S') || (*s == 's'))
+  		return(FORMAT_SMIME);
+ 	else if ((*s == 'M') || (*s == 'm'))
+ 		return(FORMAT_MSBLOB);
 	else if ((*s == '1')
 		|| (strcmp(s,"PKCS12") == 0) || (strcmp(s,"pkcs12") == 0)
 		|| (strcmp(s,"P12") == 0) || (strcmp(s,"p12") == 0))
 		return(FORMAT_PKCS12);
 	else if ((*s == 'E') || (*s == 'e'))
 		return(FORMAT_ENGINE);
+	else if ((*s == 'P') || (*s == 'p'))
+ 		{
+ 		if (s[1] == 'V' || s[1] == 'v')
+ 			return FORMAT_PVK;
+ 		else
+  			return(FORMAT_PEM);
+ 		}
 	else
 		return(FORMAT_UNDEF);
 	}
@@ -638,6 +666,15 @@ static char *app_get_pass(BIO *err, char *arg, int keepbio)
 				BIO_printf(err, "Can't open file %s\n", arg + 5);
 				return NULL;
 			}
+#if !defined(_WIN32)
+		/*
+		 * Under _WIN32, which covers even Win64 and CE, file
+		 * descriptors referenced by BIO_s_fd are not inherited
+		 * by child process and therefore below is not an option.
+		 * It could have been an option if bss_fd.c was operating
+		 * on real Windows descriptors, such as those obtained
+		 * with CreateFile.
+		 */
 		} else if(!strncmp(arg, "fd:", 3)) {
 			BIO *btmp;
 			i = atoi(arg + 3);
@@ -649,6 +686,7 @@ static char *app_get_pass(BIO *err, char *arg, int keepbio)
 			/* Can't do BIO_gets on an fd BIO so add a buffering BIO */
 			btmp = BIO_new(BIO_f_buffer());
 			pwdbio = BIO_push(btmp, pwdbio);
+#endif
 		} else if(!strcmp(arg, "stdin")) {
 			pwdbio = BIO_new_fp(stdin, BIO_NOCLOSE);
 			if(!pwdbio) {
@@ -748,8 +786,6 @@ static int load_pkcs12(BIO *err, BIO *in, const char *desc,
 X509 *load_cert(BIO *err, const char *file, int format,
 	const char *pass, ENGINE *e, const char *cert_descrip)
 	{
-	ASN1_HEADER *ah=NULL;
-	BUF_MEM *buf=NULL;
 	X509 *x=NULL;
 	BIO *cert;
 
@@ -761,7 +797,11 @@ X509 *load_cert(BIO *err, const char *file, int format,
 
 	if (file == NULL)
 		{
+#ifdef _IONBF
+# ifndef OPENSSL_NO_SETVBUF_IONBF
 		setvbuf(stdin, NULL, _IONBF, 0);
+# endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
+#endif
 		BIO_set_fp(cert,stdin,BIO_NOCLOSE);
 		}
 	else
@@ -779,46 +819,21 @@ X509 *load_cert(BIO *err, const char *file, int format,
 		x=d2i_X509_bio(cert,NULL);
 	else if (format == FORMAT_NETSCAPE)
 		{
-		const unsigned char *p,*op;
-		int size=0,i;
-
-		/* We sort of have to do it this way because it is sort of nice
-		 * to read the header first and check it, then
-		 * try to read the certificate */
-		buf=BUF_MEM_new();
-		for (;;)
-			{
-			if ((buf == NULL) || (!BUF_MEM_grow(buf,size+1024*10)))
+		NETSCAPE_X509 *nx;
+		nx=ASN1_item_d2i_bio(ASN1_ITEM_rptr(NETSCAPE_X509),cert,NULL);
+		if (nx == NULL)
 				goto end;
-			i=BIO_read(cert,&(buf->data[size]),1024*10);
-			size+=i;
-			if (i == 0) break;
-			if (i < 0)
-				{
-				perror("reading certificate");
-				goto end;
-				}
-			}
-		p=(unsigned char *)buf->data;
-		op=p;
 
-		/* First load the header */
-		if ((ah=d2i_ASN1_HEADER(NULL,&p,(long)size)) == NULL)
-			goto end;
-		if ((ah->header == NULL) || (ah->header->data == NULL) ||
-			(strncmp(NETSCAPE_CERT_HDR,(char *)ah->header->data,
-			ah->header->length) != 0))
+		if ((strncmp(NETSCAPE_CERT_HDR,(char *)nx->header->data,
+			nx->header->length) != 0))
 			{
+			NETSCAPE_X509_free(nx);
 			BIO_printf(err,"Error reading header on certificate\n");
 			goto end;
 			}
-		/* header is ok, so now read the object */
-		p=op;
-		ah->meth=X509_asn1_meth();
-		if ((ah=d2i_ASN1_HEADER(&ah,&p,(long)size)) == NULL)
-			goto end;
-		x=(X509 *)ah->data;
-		ah->data=NULL;
+		x=nx->cert;
+		nx->cert = NULL;
+		NETSCAPE_X509_free(nx);
 		}
 	else if (format == FORMAT_PEM)
 		x=PEM_read_bio_X509_AUX(cert,NULL,
@@ -840,9 +855,7 @@ end:
 		BIO_printf(err,"unable to load certificate\n");
 		ERR_print_errors(err);
 		}
-	if (ah != NULL) ASN1_HEADER_free(ah);
 	if (cert != NULL) BIO_free(cert);
-	if (buf != NULL) BUF_MEM_free(buf);
 	return(x);
 	}
 
@@ -887,7 +900,11 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 		}
 	if (file == NULL && maybe_stdin)
 		{
+#ifdef _IONBF
+# ifndef OPENSSL_NO_SETVBUF_IONBF
 		setvbuf(stdin, NULL, _IONBF, 0);
+# endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
+#endif
 		BIO_set_fp(key,stdin,BIO_NOCLOSE);
 		}
 	else
@@ -918,6 +935,13 @@ EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin,
 				&pkey, NULL, NULL))
 			goto end;
 		}
+#if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_NO_DSA) && !defined (OPENSSL_NO_RC4)
+	else if (format == FORMAT_MSBLOB)
+		pkey = b2i_PrivateKey_bio(key);
+	else if (format == FORMAT_PVK)
+		pkey = b2i_PVK_bio(key, (pem_password_cb *)password_callback,
+								&cb_data);
+#endif
 	else
 		{
 		BIO_printf(err,"bad input format specified for key file\n");
@@ -967,7 +991,11 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 		}
 	if (file == NULL && maybe_stdin)
 		{
+#ifdef _IONBF
+# ifndef OPENSSL_NO_SETVBUF_IONBF
 		setvbuf(stdin, NULL, _IONBF, 0);
+# endif /* ndef OPENSSL_NO_SETVBUF_IONBF */
+#endif
 		BIO_set_fp(key,stdin,BIO_NOCLOSE);
 		}
 	else
@@ -982,6 +1010,37 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 		{
 		pkey=d2i_PUBKEY_bio(key, NULL);
 		}
+#ifndef OPENSSL_NO_RSA
+	else if (format == FORMAT_ASN1RSA)
+		{
+		RSA *rsa;
+		rsa = d2i_RSAPublicKey_bio(key, NULL);
+		if (rsa)
+			{
+			pkey = EVP_PKEY_new();
+			if (pkey)
+				EVP_PKEY_set1_RSA(pkey, rsa);
+			RSA_free(rsa);
+			}
+		else
+			pkey = NULL;
+		}
+	else if (format == FORMAT_PEMRSA)
+		{
+		RSA *rsa;
+		rsa = PEM_read_bio_RSAPublicKey(key, NULL, 
+			(pem_password_cb *)password_callback, &cb_data);
+		if (rsa)
+			{
+			pkey = EVP_PKEY_new();
+			if (pkey)
+				EVP_PKEY_set1_RSA(pkey, rsa);
+			RSA_free(rsa);
+			}
+		else
+			pkey = NULL;
+		}
+#endif
 	else if (format == FORMAT_PEM)
 		{
 		pkey=PEM_read_bio_PUBKEY(key,NULL,
@@ -991,6 +1050,10 @@ EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin,
 	else if (format == FORMAT_NETSCAPE || format == FORMAT_IISSGC)
 		pkey = load_netscape_key(err, key, file, key_descrip, format);
 #endif
+#if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_NO_DSA)
+	else if (format == FORMAT_MSBLOB)
+		pkey = b2i_PublicKey_bio(key);
+#endif
 	else
 		{
 		BIO_printf(err,"bad input format specified for key file\n");
@@ -1049,76 +1112,122 @@ error:
 	}
 #endif /* ndef OPENSSL_NO_RC4 */
 
-STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
-	const char *pass, ENGINE *e, const char *cert_descrip)
+static int load_certs_crls(BIO *err, const char *file, int format,
+	const char *pass, ENGINE *e, const char *desc,
+	STACK_OF(X509) **pcerts, STACK_OF(X509_CRL) **pcrls)
 	{
-	BIO *certs;
 	int i;
-	STACK_OF(X509) *othercerts = NULL;
-	STACK_OF(X509_INFO) *allcerts = NULL;
+	BIO *bio;
+	STACK_OF(X509_INFO) *xis = NULL;
 	X509_INFO *xi;
 	PW_CB_DATA cb_data;
+	int rv = 0;
 
 	cb_data.password = pass;
 	cb_data.prompt_info = file;
 
-	if((certs = BIO_new(BIO_s_file())) == NULL)
+	if (format != FORMAT_PEM)
 		{
-		ERR_print_errors(err);
-		goto end;
+		BIO_printf(err,"bad input format specified for %s\n", desc);
+		return 0;
 		}
 
 	if (file == NULL)
-		BIO_set_fp(certs,stdin,BIO_NOCLOSE);
+		bio = BIO_new_fp(stdin,BIO_NOCLOSE);
 	else
+		bio = BIO_new_file(file, "r");
+
+	if (bio == NULL)
 		{
-		if (BIO_read_filename(certs,file) <= 0)
-			{
-			BIO_printf(err, "Error opening %s %s\n",
-				cert_descrip, file);
-			ERR_print_errors(err);
+		BIO_printf(err, "Error opening %s %s\n",
+				desc, file ? file : "stdin");
+		ERR_print_errors(err);
+		return 0;
+		}
+
+	xis = PEM_X509_INFO_read_bio(bio, NULL,
+				(pem_password_cb *)password_callback, &cb_data);
+
+	BIO_free(bio);
+
+	if (pcerts)
+		{
+		*pcerts = sk_X509_new_null();
+		if (!*pcerts)
 			goto end;
-			}
 		}
 
-	if      (format == FORMAT_PEM)
+	if (pcrls)
 		{
-		othercerts = sk_X509_new_null();
-		if(!othercerts)
-			{
-			sk_X509_free(othercerts);
-			othercerts = NULL;
+		*pcrls = sk_X509_CRL_new_null();
+		if (!*pcrls)
 			goto end;
+		}
+
+	for(i = 0; i < sk_X509_INFO_num(xis); i++)
+		{
+		xi = sk_X509_INFO_value (xis, i);
+		if (xi->x509 && pcerts)
+			{
+			if (!sk_X509_push(*pcerts, xi->x509))
+				goto end;
+			xi->x509 = NULL;
 			}
-		allcerts = PEM_X509_INFO_read_bio(certs, NULL,
-				(pem_password_cb *)password_callback, &cb_data);
-		for(i = 0; i < sk_X509_INFO_num(allcerts); i++)
+		if (xi->crl && pcrls)
 			{
-			xi = sk_X509_INFO_value (allcerts, i);
-			if (xi->x509)
-				{
-				sk_X509_push(othercerts, xi->x509);
-				xi->x509 = NULL;
-				}
+			if (!sk_X509_CRL_push(*pcrls, xi->crl))
+				goto end;
+			xi->crl = NULL;
 			}
-		goto end;
 		}
-	else	{
-		BIO_printf(err,"bad input format specified for %s\n",
-			cert_descrip);
-		goto end;
-		}
-end:
-	if (othercerts == NULL)
+
+	if (pcerts && sk_X509_num(*pcerts) > 0)
+		rv = 1;
+
+	if (pcrls && sk_X509_CRL_num(*pcrls) > 0)
+		rv = 1;
+
+	end:
+
+	if (xis)
+		sk_X509_INFO_pop_free(xis, X509_INFO_free);
+
+	if (rv == 0)
 		{
-		BIO_printf(err,"unable to load certificates\n");
+		if (pcerts)
+			{
+			sk_X509_pop_free(*pcerts, X509_free);
+			*pcerts = NULL;
+			}
+		if (pcrls)
+			{
+			sk_X509_CRL_pop_free(*pcrls, X509_CRL_free);
+			*pcrls = NULL;
+			}
+		BIO_printf(err,"unable to load %s\n",
+				pcerts ? "certificates" : "CRLs");
 		ERR_print_errors(err);
 		}
-	if (allcerts) sk_X509_INFO_pop_free(allcerts, X509_INFO_free);
-	if (certs != NULL) BIO_free(certs);
-	return(othercerts);
+	return rv;
 	}
 
+STACK_OF(X509) *load_certs(BIO *err, const char *file, int format,
+	const char *pass, ENGINE *e, const char *desc)
+	{
+	STACK_OF(X509) *certs;
+	if (!load_certs_crls(err, file, format, pass, e, desc, &certs, NULL))