Import DTS files from Linux 5.7vendor/device-tree/5.7

9 files changed, 150 insertions, 29 deletions

diff --git a/Bindings/dma/adi,axi-dmac.txt b/Bindings/dma/adi,axi-dmac.txt
index b38ee732efa9..cd17684aaab5 100644
--- a/Bindings/dma/adi,axi-dmac.txt
+++ b/Bindings/dma/adi,axi-dmac.txt
@@ -1,4 +1,4 @@
-Analog Device AXI-DMAC DMA controller
+Analog Devices AXI-DMAC DMA controller
 
 Required properties:
  - compatible: Must be "adi,axi-dmac-1.00.a".
diff --git a/Bindings/dma/fsl-edma.txt b/Bindings/dma/fsl-edma.txt
index e77b08ebcd06..ee1754739b4b 100644
--- a/Bindings/dma/fsl-edma.txt
+++ b/Bindings/dma/fsl-edma.txt
@@ -10,7 +10,8 @@ Required properties:
 - compatible :
 	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
 	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
-	- "fsl,fsl,ls1028a-edma" for eDMA used similar to that on Vybrid vf610 SoC
+	- "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
+	  LS1028A SoC.
 - reg : Specifies base physical address(s) and size of the eDMA registers.
 	The 1st region is eDMA control register's address and size.
 	The 2nd and the 3rd regions are programmable channel multiplexing
diff --git a/Bindings/dma/renesas,usb-dmac.txt b/Bindings/dma/renesas,usb-dmac.txt
index f1f95f678739..e8f6c42e80f2 100644
--- a/Bindings/dma/renesas,usb-dmac.txt
+++ b/Bindings/dma/renesas,usb-dmac.txt
@@ -16,6 +16,7 @@ Required Properties:
 	  - "renesas,r8a7794-usb-dmac" (R-Car E2)
 	  - "renesas,r8a7795-usb-dmac" (R-Car H3)
 	  - "renesas,r8a7796-usb-dmac" (R-Car M3-W)
+	  - "renesas,r8a77961-usb-dmac" (R-Car M3-W+)
 	  - "renesas,r8a77965-usb-dmac" (R-Car M3-N)
 	  - "renesas,r8a77990-usb-dmac" (R-Car E3)
 	  - "renesas,r8a77995-usb-dmac" (R-Car D3)
diff --git a/Bindings/dma/sifive,fu540-c000-pdma.yaml b/Bindings/dma/sifive,fu540-c000-pdma.yaml
index 2ca3ddbe1ff4..e7f2ad7dab5e 100644
--- a/Bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -43,6 +43,8 @@ required:
   - interrupts
   - '#dma-cells'
 
+additionalProperties: false
+
 examples:
   - |
     dma@3000000 {
diff --git a/Bindings/dma/socionext,uniphier-mio-dmac.yaml b/Bindings/dma/socionext,uniphier-mio-dmac.yaml
new file mode 100644
index 000000000000..e7bf6dd7da29
--- /dev/null
+++ b/Bindings/dma/socionext,uniphier-mio-dmac.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-mio-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier Media IO DMA controller
+
+description: |
+  This works as an external DMA engine for SD/eMMC controllers etc.
+  found in UniPhier LD4, Pro4, sLD8 SoCs.
+
+maintainers:
+  - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    const: socionext,uniphier-mio-dmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      A list of interrupt specifiers associated with the DMA channels.
+      The number of interrupt lines is SoC-dependent.
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#dma-cells':
+    description: The single cell represents the channel index.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // In the example below, "interrupts = <0 68 4>, <0 68 4>, ..." is not a
+    // typo. The first two channels share a single interrupt line.
+
+    dmac: dma-controller@5a000000 {
+        compatible = "socionext,uniphier-mio-dmac";
+        reg = <0x5a000000 0x1000>;
+        interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+                     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+        clocks = <&mio_clk 7>;
+        resets = <&mio_rst 7>;
+        #dma-cells = <1>;
+    };
diff --git a/Bindings/dma/socionext,uniphier-xdmac.yaml b/Bindings/dma/socionext,uniphier-xdmac.yaml
new file mode 100644
index 000000000000..371f18773198
--- /dev/null
+++ b/Bindings/dma/socionext,uniphier-xdmac.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-xdmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier external DMA controller
+
+description: |
+  This describes the devicetree bindings for an external DMA engine to perform
+  memory-to-memory or peripheral-to-memory data transfer capable of supporting
+  16 channels, implemented in Socionext UniPhier SoCs.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    const: socionext,uniphier-xdmac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 2
+    description: |
+      DMA request from clients consists of 2 cells:
+        1. Channel index
+        2. Transfer request factor number, If no transfer factor, use 0.
+           The number is SoC-specific, and this should be specified with
+           relation to the device to use the DMA controller.
+
+  dma-channels:
+    minimum: 1
+    maximum: 16
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - dma-channels
+
+examples:
+  - |
+    xdmac: dma-controller@5fc10000 {
+        compatible = "socionext,uniphier-xdmac";
+        reg = <0x5fc10000 0x5300>;
+        interrupts = <0 188 4>;
+        #dma-cells = <2>;
+        dma-channels = <16>;
+    };
+
+...
diff --git a/Bindings/dma/ti-edma.txt b/Bindings/dma/ti-edma.txt
index 0e1398f93aa2..29fcd37082e8 100644
--- a/Bindings/dma/ti-edma.txt
+++ b/Bindings/dma/ti-edma.txt
@@ -180,7 +180,7 @@ edma1_tptc0: tptc@27b0000 {
 };
 
 edma1_tptc1: tptc@27b8000 {
-	compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc";
+	compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
 	reg =	<0x027b8000 0x400>;
 	power-domains = <&k2g_pds 0x4f>;
 };
diff --git a/Bindings/dma/ti/k3-udma.yaml b/Bindings/dma/ti/k3-udma.yaml
index 34780d7535b8..39ea05e6e5ff 100644
--- a/Bindings/dma/ti/k3-udma.yaml
+++ b/Bindings/dma/ti/k3-udma.yaml
@@ -45,7 +45,8 @@ allOf:
 
 properties:
   "#dma-cells":
-    const: 1
+    minimum: 1
+    maximum: 2
     description: |
       The cell is the PSI-L  thread ID of the remote (to UDMAP) end.
       Valid ranges for thread ID depends on the data movement direction:
@@ -55,6 +56,8 @@ properties:
       Please refer to the device documentation for the PSI-L thread map and also
       the PSI-L peripheral chapter for the correct thread ID.
 
+      When #dma-cells is 2, the second parameter is the channel ATYPE.
+
   compatible:
     enum:
       - ti,am654-navss-main-udmap
@@ -131,6 +134,20 @@ required:
   - ti,sci-rm-range-rchan
   - ti,sci-rm-range-rflow
 
+if:
+  properties:
+    "#dma-cells":
+      const: 2
+then:
+  properties:
+    ti,udma-atype:
+      description: ATYPE value which should be used by non slave channels
+      allOf:
+        - $ref: /schemas/types.yaml#/definitions/uint32
+
+  required:
+    - ti,udma-atype
+
 examples:
   - |+
     cbass_main {
diff --git a/Bindings/dma/uniphier-mio-dmac.txt b/Bindings/dma/uniphier-mio-dmac.txt
deleted file mode 100644
index b12388dc7eac..000000000000
--- a/Bindings/dma/uniphier-mio-dmac.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-UniPhier Media IO DMA controller
-
-This works as an external DMA engine for SD/eMMC controllers etc.
-found in UniPhier LD4, Pro4, sLD8 SoCs.
-
-Required properties:
-- compatible: should be "socionext,uniphier-mio-dmac".
-- reg: offset and length of the register set for the device.
-- interrupts: a list of interrupt specifiers associated with the DMA channels.
-- clocks: a single clock specifier.
-- #dma-cells: should be <1>. The single cell represents the channel index.
-
-Example:
-	dmac: dma-controller@5a000000 {
-		compatible = "socionext,uniphier-mio-dmac";
-		reg = <0x5a000000 0x1000>;
-		interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-			     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
-		clocks = <&mio_clk 7>;
-		#dma-cells = <1>;
-	};
-
-Note:
-In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo.
-The first two channels share a single interrupt line.