Bring in Ian Campbell's pruned dts repo.vendor/device-tree/ianc-efa963ec

From git://xenbits.xen.org/people/ianc/device-tree-rebasing.git
commit efa963ec806366c9628dfd1269316bb93b7ecb15
Merge: a72ba09 459c249
Author: Ian Campbell <ian.campbell@citrix.com>
Date:   Wed Feb 26 08:39:16 2014 +0000

    Merge tag 'v3.14-rc4-dts'

    Linux 3.14-rc4

6 files changed, 252 insertions, 0 deletions

diff --git a/Bindings/staging/iio/adc/lpc32xx-adc.txt b/Bindings/staging/iio/adc/lpc32xx-adc.txt
new file mode 100644
index 000000000000..b3629d3a9adf
--- /dev/null
+++ b/Bindings/staging/iio/adc/lpc32xx-adc.txt
@@ -0,0 +1,16 @@
+* NXP LPC32xx SoC ADC controller
+
+Required properties:
+- compatible: must be "nxp,lpc3220-adc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The ADC interrupt
+
+Example:
+
+	adc@40048000 {
+		compatible = "nxp,lpc3220-adc";
+		reg = <0x40048000 0x1000>;
+		interrupt-parent = <&mic>;
+		interrupts = <39 0>;
+	};
diff --git a/Bindings/staging/iio/adc/mxs-lradc.txt b/Bindings/staging/iio/adc/mxs-lradc.txt
new file mode 100644
index 000000000000..ee05dc390694
--- /dev/null
+++ b/Bindings/staging/iio/adc/mxs-lradc.txt
@@ -0,0 +1,47 @@
+* Freescale i.MX28 LRADC device driver
+
+Required properties:
+- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc"
+              for i.MX28 SoC
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the LRADC interrupts
+
+Optional properties:
+- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen
+                               to LRADC. Valid value is either 4 or 5. If this
+                               property is not present, then the touchscreen is
+                               disabled. 5 wires is valid for i.MX28 SoC only.
+- fsl,ave-ctrl: number of samples per direction to calculate an average value.
+                Allowed value is 1 ... 31, default is 4
+- fsl,ave-delay: delay between consecutive samples. Allowed value is
+                 1 ... 2047. It is used if 'fsl,ave-ctrl' > 1, counts at
+                 2 kHz and its default is 2 (= 1 ms)
+- fsl,settling: delay between plate switch to next sample. Allowed value is
+                1 ... 2047. It counts at 2 kHz and its default is
+                10 (= 5 ms)
+
+Example for i.MX23 SoC:
+
+	lradc@80050000 {
+		compatible = "fsl,imx23-lradc";
+		reg = <0x80050000 0x2000>;
+		interrupts = <36 37 38 39 40 41 42 43 44>;
+		status = "okay";
+		fsl,lradc-touchscreen-wires = <4>;
+		fsl,ave-ctrl = <4>;
+		fsl,ave-delay = <2>;
+		fsl,settling = <10>;
+	};
+
+Example for i.MX28 SoC:
+
+	lradc@80050000 {
+		compatible = "fsl,imx28-lradc";
+		reg = <0x80050000 0x2000>;
+		interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>;
+		status = "okay";
+		fsl,lradc-touchscreen-wires = <5>;
+		fsl,ave-ctrl = <4>;
+		fsl,ave-delay = <2>;
+		fsl,settling = <10>;
+	};
diff --git a/Bindings/staging/iio/adc/spear-adc.txt b/Bindings/staging/iio/adc/spear-adc.txt
new file mode 100644
index 000000000000..02ea23a63f20
--- /dev/null
+++ b/Bindings/staging/iio/adc/spear-adc.txt
@@ -0,0 +1,26 @@
+* ST SPEAr ADC device driver
+
+Required properties:
+- compatible: Should be "st,spear600-adc"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the ADC interrupt
+- sampling-frequency: Default sampling frequency
+
+Optional properties:
+- vref-external: External voltage reference in milli-volts. If omitted
+  the internal voltage reference will be used.
+- average-samples: Number of samples to generate an average value. If
+  omitted, single data conversion will be used.
+
+Examples:
+
+	adc: adc@d8200000 {
+		compatible = "st,spear600-adc";
+		reg = <0xd8200000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <6>;
+		sampling-frequency = <5000000>;
+		vref-external = <2500>;	/* 2.5V VRef */
+	};
diff --git a/Bindings/staging/imx-drm/fsl-imx-drm.txt b/Bindings/staging/imx-drm/fsl-imx-drm.txt
new file mode 100644
index 000000000000..b876d4925a57
--- /dev/null
+++ b/Bindings/staging/imx-drm/fsl-imx-drm.txt
@@ -0,0 +1,44 @@
+Freescale i.MX IPUv3
+====================
+
+Required properties:
+- compatible: Should be "fsl,<chip>-ipu"
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain sync interrupt and error interrupt,
+  in this order.
+- #crtc-cells: 1, See below
+- resets: phandle pointing to the system reset controller and
+          reset line index, see reset/fsl,imx-src.txt for details
+
+example:
+
+ipu: ipu@18000000 {
+	#crtc-cells = <1>;
+	compatible = "fsl,imx53-ipu";
+	reg = <0x18000000 0x080000000>;
+	interrupts = <11 10>;
+	resets = <&src 2>;
+};
+
+Parallel display support
+========================
+
+Required properties:
+- compatible: Should be "fsl,imx-parallel-display"
+- crtc: the crtc this display is connected to, see below
+Optional properties:
+- interface_pix_fmt: How this display is connected to the
+  crtc. Currently supported types: "rgb24", "rgb565", "bgr666"
+- edid: verbatim EDID data block describing attached display.
+- ddc: phandle describing the i2c bus handling the display data
+  channel
+
+example:
+
+display@di0 {
+	compatible = "fsl,imx-parallel-display";
+	edid = [edid-data];
+	crtc = <&ipu 0>;
+	interface-pix-fmt = "rgb24";
+};
diff --git a/Bindings/staging/imx-drm/ldb.txt b/Bindings/staging/imx-drm/ldb.txt
new file mode 100644
index 000000000000..ed9377811ee2
--- /dev/null
+++ b/Bindings/staging/imx-drm/ldb.txt
@@ -0,0 +1,99 @@
+Device-Tree bindings for LVDS Display Bridge (ldb)
+
+LVDS Display Bridge
+===================
+
+The LVDS Display Bridge device tree node contains up to two lvds-channel
+nodes describing each of the two LVDS encoder channels of the bridge.
+
+Required properties:
+ - #address-cells : should be <1>
+ - #size-cells : should be <0>
+ - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
+                Both LDB versions are similar, but i.MX6 has an additional
+                multiplexer in the front to select any of the four IPU display
+                interfaces as input for each LVDS channel.
+ - gpr : should be <&gpr> on i.MX53 and i.MX6q.
+         The phandle points to the iomuxc-gpr region containing the LVDS
+         control register.
+- clocks, clock-names : phandles to the LDB divider and selector clocks and to
+                        the display interface selector clocks, as described in
+                        Documentation/devicetree/bindings/clock/clock-bindings.txt
+        The following clocks are expected on i.MX53:
+                "di0_pll" - LDB LVDS channel 0 mux
+                "di1_pll" - LDB LVDS channel 1 mux
+                "di0" - LDB LVDS channel 0 gate
+                "di1" - LDB LVDS channel 1 gate
+                "di0_sel" - IPU1 DI0 mux
+                "di1_sel" - IPU1 DI1 mux
+        On i.MX6q the following additional clocks are needed:
+                "di2_sel" - IPU2 DI0 mux
+                "di3_sel" - IPU2 DI1 mux
+        The needed clock numbers for each are documented in
+        Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
+        Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+
+Optional properties:
+ - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
+ - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53,
+               not used on i.MX6q
+ - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should
+   be configured - one input will be distributed on both outputs in dual
+   channel mode
+
+LVDS Channel
+============
+
+Each LVDS Channel has to contain a display-timings node that describes the
+video timings for the connected LVDS display. For detailed information, also
+have a look at Documentation/devicetree/bindings/video/display-timing.txt.
+
+Required properties:
+ - reg : should be <0> or <1>
+ - crtcs : a list of phandles with index pointing to the IPU display interfaces
+           that can be used as video source for this channel.
+ - fsl,data-mapping : should be "spwg" or "jeida"
+                      This describes how the color bits are laid out in the
+                      serialized LVDS signal.
+ - fsl,data-width : should be <18> or <24>
+
+example:
+
+gpr: iomuxc-gpr@53fa8000 {
+	/* ... */
+};
+
+ldb: ldb@53fa8008 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx53-ldb";
+	gpr = <&gpr>;
+	clocks = <&clks 122>, <&clks 120>,
+		 <&clks 115>, <&clks 116>,
+		 <&clks 123>, <&clks 85>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel",
+		      "di0", "di1";
+
+	lvds-channel@0 {
+		reg = <0>;
+		crtcs = <&ipu 0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		display-timings {
+			/* ... */
+		};
+	};
+
+	lvds-channel@1 {
+		reg = <1>;
+		crtcs = <&ipu 1>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		display-timings {
+			/* ... */
+		};
+	};
+};
diff --git a/Bindings/staging/xillybus.txt b/Bindings/staging/xillybus.txt
new file mode 100644
index 000000000000..9e316dc2e40f
--- /dev/null
+++ b/Bindings/staging/xillybus.txt
@@ -0,0 +1,20 @@
+* Xillybus driver for generic FPGA interface
+
+Required properties:
+- compatible: Should be "xillybus,xillybus-1.00.a"
+- reg: Address and length of the register set for the device
+- interrupts: Contains one interrupt node, typically consisting of three cells.
+- interrupt-parent: the phandle for the interrupt controller that
+                    services interrupts for this device.
+
+Optional properties:
+- dma-coherent: Present if DMA operations are coherent
+
+Example:
+
+	xillybus@ff200400 {
+		compatible = "xillybus,xillybus-1.00.a";
+		reg = < 0xff200400 0x00000080 >;
+		interrupts = < 0 40 1 >;
+		interrupt-parent = <&intc>;
+	} ;